opcodes/ChangeLog

   1 2001-11-01  Stephane Carrez  <Stephane.Carrez@worldnet.fr>
   2
   3         * m68hc11-dis.c (print_insn): Fix disassembly of movb with a
   4         constant as source.
   5
   6 2001-10-30  Hans-Peter Nilsson  <hp@bitrange.com>
   7
   8         * Makefile.am (CFILES): Add mmix-dis.c and mmix-opc.c.  Regenerate
   9         dependencies.
  10         * Makefile.in: Regenerate.
  11         * mmix-dis.c, mmix-opc.c: New files.
  12
  13 2001-10-29  Kazu Hirata  <kazu@hxi.com>
  14
  15         * d30v-dis.c: Fix a comment typo.
  16
  17 2001-10-23  Chris Demetriou  <cgd@broadcom.com>
  18
  19         * mips-opc.c (mips_builtin_opcodes): Mark "bgezall" and
  20         "bltzall" as writing GPR 31 (since they do).
  21
  22         * mips-dis.c (print_insn_arg): Calculate info->target
  23         where appropriate.
  24         (print_insn_mips): Fill in instruction info.
  25         (print_mips16_insn_arg): Remove unneded variable 'val'.
  26         Removed duplicated instruction target calculations,
  27         calculate once and print that result.  Use same idiom for
  28         masking the jump segment bits as is used in print_insn_arg.
  29
  30 2001-10-20  Alan Modra  <amodra@bigpond.net.au>
  31
  32         * ppc-opc.c (CT): Make it an optional operand.
  33
  34 2001-10-17  Chris Demetriou  <cgd@broadcom.com>
  35
  36         * mips-dis.c (mips_isa_type): Make the ISA used to disassemble
  37         SB-1 binaries include instructions specific to the SB-1.
  38         * mips-opc.c (SB1): New definition.
  39         (mips_builtin_opcodes): Add SB-1 extension opcodes "div.ps",
  40         "recip.ps", "rsqrt.ps", and "sqrt.ps".
  41
  42 2001-10-17  matthew green  <mrg@redhat.com>
  43
  44         * ppc-opc.c (STRM): New AltiVec operand.
  45         (XDSS): New AltiVec instruction form.
  46         (mtvscr): Correct operand list.
  47         (dst, dstt, dstst, dststt, dss, dssall): AltiVec instructions.
  48
  49 2001-10-17  Alan Modra  <amodra@bigpond.net.au>
  50
  51         * po/POTFILES.in: Regenerate.
  52
  53 2001-10-13  matthew green  <mrg@redhat.com>
  54
  55         * ppc-opc.c (MO): New macro for MO field of mbar instruction.
  56         (powerpc_opcodes): Add rfci, wrtee, wrteei, mfdcrx, mfdcr,
  57         mtdcrx, mtdcr, msync, dcba and mbar as BookE instructions.
  58
  59 2001-10-13  Nick Clifton  <nickc@cambridge.redhat.com>
  60
  61         * cgen-ibld.in: Include safe-ctype.h in preference to
  62         ctype.h.
  63         * cgen-asm.in: Include safe-ctype.h in preference to
  64         ctype.h.  Fix formatting.  Use ISSPACE instead of isspace and
  65         TOLOWER instead of tolower.
  66         (@arch@_cgen_build_insn_regex): Remove duplication of syntax
  67         string elements in constructed regular expression.
  68         * fr30-asm.c: Regenerate.
  69         * fr30-desc.c: Regenerate.
  70         * fr30-ibld.c: Regenerate.
  71         * m32r-asm.c: Regenerate.
  72         * m32r-desc.c: Regenerate.
  73         * m32r-ibld.c: Regenerate.
  74         * openrisc-asm.c: Regenerate.
  75         * openrisc-desc.c: Regenerate.
  76         * openrisc-ibld.c: Regenerate.
  77         * po/opcodes.pot: Regenerate.
  78
  79 2001-10-12  matthew green  <mrg@redhat.com>
  80
  81         * ppc-opc.c (insert_de, extract_de, insert_des, extract_des): New
  82         instruction field instruction/extraction functions for new BookE
  83         DE form instructions.
  84         (CT): New macro for CT field in an X form instruction.
  85         (DE, DES, DEO, DE_MASK): New macros for DE/DES fields in DE form
  86         instructions.
  87         (PPC64): Don't include PPC_OPCODE_PPC.
  88         (403): New opcode macro for PPC403 processors.
  89         (BOOKE): New opcode macro for BookE processors.
  90         (bce, bcel, bcea, bcela, bclre, bclrel: New BookE instructions.
  91         (bcctre, bcctrel, be, bel, bea, bela, icbt, icbte, lwzxe): Likewise.
  92         (dcbste, lwzuxe, luxe, dcbfe, lbzxe, lwarxe, lbzuxe): Likewise.
  93         (stwcxe, stwxe, stxe, stwuxe, stuxe, stbxe, dcbtste, stbuxe): Likewise.
  94         (mfapidi, dcbte, lhzxe, lhzuxe, lhaxe, lhauxe, subfe64): Likewise.
  95         (subfeo64, adde64, addeo64, sthxe, sthuxe, subfze64): Likewise.
  96         (subfzeo64, addze64, addzeo64, dcbie, subfme64, subfmeo64): Likewise.
  97         (addme64, addmeo64, stdcxe., mcrxr64, lwbrxe, lfsxe, lfsuxe): Likewise.
  98         (lfdxe, lfduxe, stwbrxe, stfsxe, stfsuxe, stfdxe, dcbae): Likewise.
  99         (stfduxe, tlbivax, tlbivaxe, lhbrxe, ldxe, lduxe, tlbsx): Likewise.
 100         (tlbsxe, sthbrxe, stdxe, stduxe, icbie, stfiwxe, dcbze, lbze): Likewise.
 101         (lbzue, ldue, lhze, lhzue, lhae, lhaue, lwze, lwzue): Likewise.
 102         (stbe, stbue, sthe, sthue, stwe, stwue, lfse, lfsue, lfde): Likewise.
 103         (lfdue, stde, stdue, stfse, stfsue, stfde, stfdue): Likewise.
 104
 105         * ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc): Look
 106         for a disassembler option of `booke', `booke32' or `booke64' to enable
 107         BookE support in the disassembler.
 108
 109 2001-10-12  John Healy  <jhealy@redhat.com>
 110
 111         * cgen-dis.in (print_insn): Use min (cd->base_insn_bitsize, buflen*8)
 112         for the length when extracting the base part of the insn.
 113
 114 2001-10-09  Bruno Haible  <haible@clisp.cons.org>
 115
 116         * cgen-asm.in (*_cgen_build_insn_regex): Generate a case sensitive
 117         regular expression.  Fix some formatting problems.
 118         * fr30-asm.c: Regenerate.
 119         * openrisc-asm.c: Regenerate.
 120         * m32r-asm.c: Regenerate.
 121
 122 2001-10-09  Christian Groessler <cpg@aladdin.de>
 123
 124         * z8k-dis.c (unparse_instr): Fixed formatting. Change disassembly
 125         of indirect register memory accesses to be same format the
 126         assembler accepts.
 127
 128 2001-10-09  Nick Clifton  <nickc@cambridge.redhat.com>
 129
 130         * sh-opc.h: Fix encoding of least significant nibble of the
 131         DSP single data transfer instructions.
 132
 133         * sh-dis.c (print_insn_shx): Fix decoding of As opcode in DSP
 134         instructions.
 135
 136 2001-10-08  Nick Clifton  <nickc@cambridge.redhat.com>
 137
 138         * cgen-asm.in: Fix compile time warning messages in generated
 139         C files.
 140         * cgen-dis.in: The same.
 141         * cgen-ibld.in: The same.
 142         * fr30-asm.c: Regenerate.
 143         * fr30-desc.c: Regenerate.
 144         * fr30-dis.c: Regenerate.
 145         * fr30-ibld.c: Regenerate.
 146         * fr30-opc.c: Regenerate.
 147         * m32r-asm.c: Regenerate.
 148         * m32r-desc.c: Regenerate.
 149         * m32r-dis.c: Regenerate.
 150         * m32r-ibld.c: Regenerate.
 151         * m32r-opc.c: Regenerate.
 152         * m32r-opinst.c Regenerate.
 153         * openrisc-asm.c: Regenerate.
 154         * openrisc-desc.c: Regenerate.
 155         * openrisc-dis.c: Regenerate.
 156         * openrisc-ibld.c: Regenerate.
 157         * openrisc-opc.c: Regenerate.
 158         * openrisc-opc.h: Regenerate.
 159         * Makefile.in: Regenerate.
 160         * po/POTFILES.in: Regenerate.
 161         * po/opcodes.pot: Regenerate.
 162
 163 2001-10-08  Aldy Hernandez  <aldyh@redhat.com>
 164
 165         * arm-opc.h (arm_opcodes): Add cirrus insns.
 166
 167         * arm-dis.c (print_insn_arm): Add 'I' case.
 168
 169 2001-10-03  Alan Modra  <amodra@bigpond.net.au>
 170
 171         * po/POTFILES.in: Regenerate.
 172         * configure: Regenerate.
 173
 174 2001-10-02  Alan Modra  <amodra@bigpond.net.au>
 175
 176         * Makefile.am (Makefile): Depend on bfd/configure.in.
 177         Run "make dep-am".
 178         * Makefile.in: Regenerate.
 179
 180 2001-09-30  John Healy  <jhealy@redhat.com>
 181
 182         * cgen-ibld.in (insert_1): Switched bfd_get_bits and bfd_set_bits
 183         calls to cgen_get_insn_value and cgen_put_insn_value calls.
 184         (extract_1): Switched bfd_get_bits call to cgen_get_insn_value call.
 185
 186 2001-09-30  Hans-Peter Nilsson  <hp@bitrange.com>
 187
 188         * Makefile.am: Update dependencies with "make dep-am".
 189         * Makefile.in: Regenerate.
 190
 191 2001-09-26  Alan Modra  <amodra@bigpond.net.au>
 192
 193         * arc-dis.c: Formatting fixes.
 194         (my_sprintf): Define using VPARAMS, VA_OPEN, VA_FIXEDARG, VA_CLOSE.
 195
 196 2001-09-21  Bruno Haible  <haible@clisp.cons.org>
 197
 198         * arc-dis.c: Don't include <ctype.h>.
 199         * openrisc-desc.c: Likewise.
 200         * openrisc-ibld.c: Likewise.
 201
 202 2001-09-20  Nick Clifton  <nickc@cambridge.redhat.com>
 203
 204         * fr30-opc.c: Fix compile time warning messages.
 205         * i370-opc.c: Fix compile time warning messages.
 206         * i960-dis.c: Fix compile time warning messages.
 207         * m32r-asm.c: Fix compile time warning messages.
 208         * m32r-desc.c: Fix compile time warning messages.
 209         * m32r-dis.c: Fix compile time warning messages.
 210         * m32r-ibld.c: Fix compile time warning messages.
 211         * m32r-opc.c: Fix compile time warning messages.
 212         * m32r-opinst.c: Fix compile time warning messages.
 213         * ns32k-dis.c: Fix compile time warning messages.
 214         * openrisc-asm.c: Fix compile time warning messages.
 215         * openrisc-desc.c: Fix compile time warning messages.
 216         * openrisc-dis.c: Fix compile time warning messages.
 217         * openrisc-ibld.c: Fix compile time warning messages.
 218         * openrisc-opc.c: Fix compile time warning messages.
 219         * pdp11-dis.c: Fix compile time warning messages.
 220         * tic54x-dis.c: Fix compile time warning messages.
 221         * v850-opc.c: Fix compile time warning messages.
 222         * vax-dis.c: Fix compile time warning messages.
 223         * w65-opc.h: Fix compile time warning messages.
 224         * z8k-opc.h: Fix compile time warning messages.
 225         * z8kgen.c: Fix compile time warning messages.
 226
 227 2001-09-19  Nick Clifton  <nickc@cambridge.redhat.com>
 228
 229         * arm-dis.c:   Fix compile time warning messages.
 230         * cgen-asm.c:  Fix compile time warning messages.
 231         * cgen-dis.c:  Fix compile time warning messages.
 232         * cris-dis.c:  Fix compile time warning messages.
 233         * d10v-dis.c:  Fix compile time warning messages.
 234         * fr30-asm.c:  Fix compile time warning messages.
 235         * fr30-desc.c: Fix compile time warning messages.
 236         * fr30-dis.c:  Fix compile time warning messages.
 237         * fr30-ibld.c: Fix compile time warning messages.
 238
 239 2001-09-18  Bruno Haible  <haible@clisp.cons.org>
 240
 241         * cgen-asm.c: Include "safe-ctype.h" instead of <ctype.h>.
 242         (cgen_parse_keyword): Use ISALNUM instead of isalnum.
 243         * cgen-opc.c: Include "safe-ctype.h" instead of <ctype.h>.
 244         (cgen_keyword_lookup_name): Use ISALPHA/TOLOWER instead of
 245         isalpha/tolower.
 246         (cgen_keyword_add): Use ISALNUM instead of isalnum.
 247         (hash_keyword_name): Use TOLOWER instead of tolower.
 248         * fr30-asm.c: Include "safe-ctype.h" instead of <ctype.h>.
 249         (parse_insn_normal): Use TOLOWER/ISSPACE instead of
 250         tolower/isspace.
 251         (fr30_cgen_assemble_insn): Use ISSPACE instead of isspace.
 252         * fr30-desc.c: Don't include <ctype.h>.
 253         * fr30-ibld.c: Likewise.
 254         * ia64-gen.c: Include "safe-ctype.h" instead of <ctype.h>.
 255         (load_insn_classes, parse_resource_users, load_depfile): Use
 256         ISSPACE instead of isspace.
 257         * m32r-asm.c: Include "safe-ctype.h" instead of <ctype.h>.
 258         (parse_insn_normal): Use TOLOWER/ISSPACE instead of
 259         tolower/isspace.
 260         (m32r_cgen_assemble_insn): Use ISSPACE instead of isspace.
 261         * m32r-desc.c: Don't include <ctype.h>.
 262         * m32r-ibld.c: Likewise.
 263         * openrisc-asm.c: Include "safe-ctype.h" instead of <ctype.h>.
 264         (parse_insn_normal): Use TOLOWER/ISSPACE instead of
 265         tolower/isspace.
 266         (openrisc_cgen_assemble_insn): Use ISSPACE instead of isspace.
 267
 268 2001-09-18  Martin Schwidefsky <schwidefsky@de.ibm.com>
 269
 270         * Makefile.am: Add rules and dependencies to create the s/390 opcode
 271         table out of s390-opc.txt automatically.
 272         * configure.in: Add BFD_CC_FOR_BUILD to allow CC_FOR_BUILD to be used.
 273         * s390-mkopc.c (dumpTable): Change output to create a complete file.
 274         * s390-opc.c: New improved opcode format macros and remove the
 275         pregenerated opcode table.
 276         * s390-opc.txt: Adapt to new improved opcode format macros.
 277
 278 2001-09-14  David Schleef <ds@schleef.org>
 279
 280         * ppc-opc.c (VXA, VXA_MASK): Fix mask bits.
 281
 282 2001-09-04  Alan Modra  <amodra@bigpond.net.au>
 283
 284         * i386-dis.c (grps): Don't print the implicit al/ax/eax register
 285         for opcode 0xf6 or 0xf7 forms of mul, imul, div, idiv insns.
 286
 287 2001-08-31  Eric Christopher  <echristo@redhat.com>
 288             Jason Eckhardt    <jle@redhat.com>
 289
 290         * mips-dis.c: Add support for bfd_mach_mipsisa32 and
 291         bfd_mach_mipsisa64. Remove bfd_mach_mips32, bfd_mach_mips32_4k,
 292         bfd_mach_mips64.
 293
 294 2001-08-31  Andreas Jaeger  <aj@suse.de>
 295
 296         * tic54x-opc.c: Add default initializers to avoid warnings.
 297
 298         * arc-opc.c: Include "sysdep.h" to get stdio.h as include file.
 299         * arc-ext.c: Likewise.
 300
 301 2001-08-28  matthew gren  <mrg@redhat.com>
 302
 303         * ppc-opc.c (icbt): Order correctly.
 304
 305 2001-08-27  David Edelsohn  <dje@watson.ibm.com>
 306             Torbjorn Granlund  <tege@swox.com>
 307
 308         * ppc-opc.c (DS): Add PPC_OPERAND_DS flag.
 309         (LS): Define.
 310         (insert_ds): Complain if not a multiple of 4.
 311         (XSYNC): Define.
 312         (XSYNC_MASK): Define.
 313         (powerpc_opcodes): Add "slbmte", "lwsync", "ptesync", "slbmfev",
 314         "slbmfee".  Modify "sync" to use XSYNC_MASK and LS.
 315
 316 2001-08-26  Andreas Jaeger  <aj@suse.de>
 317
 318         * h8500-opc.h: Add default initializers to h8500_table to shut up
 319         GCC warnings.
 320
 321 2001-08-25  Andreas Jaeger  <aj@suse.de>
 322
 323         * tic54x-dis.c: Add unused attributes where needed.
 324
 325         * z8k-dis.c (output_instr): Add unused attribute.
 326
 327         * h8300-dis.c: Add missing prototypes.
 328         (bfd_h8_disassemble): Make static.
 329
 330         * cris-dis.c: Add missing prototype.
 331         * h8500-dis.c: Likewise.
 332         * m68hc11-dis.c: Likewise.
 333         * pj-dis.c: Likewise.
 334         * tic54x-dis.c: Likewise.
 335         * v850-dis.c: Likewise.
 336         * vax-dis.c: Likewise.
 337         * w65-dis.c: Likewise.
 338         * z8k-dis.c: Likewise.
 339
 340         * d10v-dis.c: Add missing prototype.
 341         (dis_long): Remove unused variable.
 342         (dis_2_short): Likewise.
 343
 344         * sh-dis.c: Add missing prototypes.
 345         * v850-opc.c: Likewise.
 346         Add unused attributes where needed.
 347
 348         * ns32k-dis.c: Add missing prototypes.
 349         (bit_extract_simple): Remove unused variable.
 350
 351 2001-08-23  Martin Schwidefsky  <schwidefsky@de.ibm.com>
 352
 353         * opcodes/s390-opc.c: Add "low or high" and "not low or high"
 354         branch instructions for gcc 3.0.
 355         * opcodes/s390-opc.txt: Likewise.
 356
 357 2001-08-21  Andreas Jaeger  <aj@suse.de>
 358
 359         * i960-dis.c: Add parameters for prototypes
 360         (ctrl): Add unused attributes.
 361         (cobr): Likewise.
 362         (put_abs): Likewise.
 363
 364         * mips-dis.c: Add missing prototypes.
 365         * a29k-dis.c: Likewise.
 366         * arc-dis.c: Likewise.
 367         * ia64-opc.c: Likewise.
 368
 369         * s390-dis.c: Add missing prototypes.
 370         (init_disasm): Remove unused attribute since the parameter is
 371         used.
 372
 373 2001-08-16  Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
 374
 375         * mips-opc.c (M1): Define. Reformatted Code.
 376         (mips_builtin_opcodes): Added performance counter opcodes mfpc, mfps,
 377         mtps, mtps. Typo.
 378
 379 2001-08-16  Jonathan Larmour  <jlarmour@redhat.com>
 380
 381         * mips-opc.c: R3900s can support all branch likely INSN_MACROs where
 382         the corresponding non-likely insn is in MIPS I.
 383
 384 2001-08-13  Kazu Hirata  <kazu@hxi.com>
 385
 386         * mcore-dis.c: Fix formatting.
 387         * mips-dis.c: Likewise.
 388         * pj-dis.c: Likewise.
 389         * z8k-dis.c: Likewise.
 390
 391 2001-08-12  Richard Henderson  <rth@redhat.com>
 392
 393         * cgen-ibld.in (extract_normal): Match type of VALUE and MASK
 394         to *VALUEP.  Regenerate all cgen files.
 395
 396 2001-08-10  Richard Sandiford  <rsandifo@redhat.com>
 397
 398         * mips-dis.c (print_insn_mips): Remove OPCODE_IS_MEMBER's gp32
 399         argument.
 400         * mips-opc.c (G6): Undefine.
 401         (mips_builtin_opcodes): Remove gp32 entry for "move".  Add macro
 402         as the first "move" alternative.
 403
 404 2001-08-10  Andreas Jaeger  <aj@suse.de>
 405
 406         * configure.in: Add -Wstrict-prototypes and -Wmissing-prototypes
 407         to build warnings.
 408         * configure: Regenerate.
 409
 410 2001-08-10  Alan Modra  <amodra@bigpond.net.au>
 411
 412         * ppc-opc.c: Revert 2001-08-08.
 413
 414 2001-08-09  Alan Modra  <amodra@bigpond.net.au>
 415
 416         * dis-buf.c (generic_strcat_address): Add missing prototype.
 417         #if 0 the functions as it is unused.
 418
 419 2001-08-08  Alan Modra  <amodra@bigpond.net.au>
 420
 421         1999-10-25  Torbjorn Granlund  <tege@swox.com>
 422         * ppc-opc.c: Include "bfd.h".
 423         (powerpc_operands): Add new field for reloc type.
 424
 425 2001-07-21  Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
 426
 427         * mips-dis.c (print_insn_arg): Don't use software integer registers
 428         for coprocessor registers.
 429         (get_mips_isa): Removed.
 430         (is_newabi): New function, checks if NewABI is used.
 431         (_print_insn_mips): Get distinction between old ABI and new ABI right.
 432
 433 2001-08-01  Christian Groessler <cpg@aladdin.de>
 434
 435         * z8kgen.c: Fixed indentation of opt[] array.  Include stdio.h to
 436         get stderr definition.
 437         (internal, gas): Removed warnings.
 438         (gas): Create a correct final entry for created array.
 439         * z8k-opc.h: Recreated with new z8kgen.
 440
 441 2001-07-28  Kazu Hirata  <kazu@hxi.com>
 442
 443         * i386-dis.c: Fix formatting.
 444
 445 2001-07-28  Matthias Kramm <kramm@quiss.org>
 446
 447         * i386-dis.c: Change formatting conventions for architecture
 448         i386:intel to better match the format of various intel i386
 449         assemblers, like nasm, tasm or masm.
 450
 451 2001-07-24  Alan Modra  <amodra@bigpond.net.au>
 452
 453         * Makefile.am: Update dependencies with "make dep-am".
 454         * Makefile.in: Regenerate
 455
 456 2001-07-24  Kazu Hirata  <kazu@hxi.com>
 457
 458         * alpha-dis.c: Fix formatting.
 459         * cris-dis.c: Likewise.
 460         * d10v-dis.c: Likewise.
 461         * d30v-dis.c: Likewise.
 462         * m10300-dis.c: Likewise.
 463         * tic54x-dis.c: Likewise.
 464
 465 2001-07-23  Kazu Hirata  <kazu@hxi.com>
 466
 467         * m68k-dis.c: Fix formatting.
 468         * pj-dis.c: Likewise.
 469         * s390-dis.c: Likewise.
 470         * z8k-dis.c: Likewise.
 471
 472 2001-07-21  Chris Demetriou  <cgd@broadcom.com>
 473
 474         * mips-opc.c (mips_builtin_opcodes): Sort c.le.s and c.lt.s
 475         into the rest of the surrounding definitions.
 476
 477 2001-07-18  Alan Modra  <amodra@bigpond.net.au>
 478
 479         * i386-dis.c (grps): Print l or w suffix, and require mem modrm
 480         for lgdt, lidt, sgdt, sidt.
 481
 482 2001-07-13  Philip Blundell  <philb@gnu.org>
 483
 484         * arm-dis.c (print_insn_arm): Use decimal for offsets in LDR/STR.
 485
 486 2001-07-12  Jeff Johnston  <jjohnstn@redhat.com>
 487
 488         * cgen-asm.in: Include "xregex.h" always to enable the libiberty
 489         regex support.
 490         (@arch@_cgen_build_insn_regex): New routine from Graydon.
 491         (@arch@_cgen_assemble_insn): Add Graydon's code to use regex
 492         to verify if it is worth parsing the insn as insn "x".  Also update
 493         error message when insn is not a recognized format of the insn vs
 494         when the insn is completely unrecognized.
 495
 496 2001-07-11  Frank Ch. Eigler  <fche@redhat.com>
 497
 498         * cgen-dis.in (print_insn): Use cgen_get_insn_value instead of
 499         bfd_get_bits.
 500         * cgen-opc.c (cgen_get_insn_value, cgen_put_insn_value): Respect
 501         non-zero CGEN_CPU_DESC->insn_chunk_bitsize.
 502
 503 2001-07-09  Andreas Jaeger  <aj@suse.de>, Karsten Keil <kkeil@suse.de>
 504
 505         * i386-dis.c (set_op): Handle 64 bit and 32 bit mode.
 506         (OP_J): Use bfd_vma for mask to work properly with 64 bits.
 507         (op_address,op_riprel): Use bfd_vma to handle 64 bits.
 508
 509 2001-07-05  Ben Elliston  <bje@redhat.com>
 510
 511         * Makefile.am (CPUDIR): Define.
 512         (stamp-m32r): Update dependencies.
 513         (stamp-fr30): Ditto.
 514         (stamp-openrisc): Ditto.
 515         * Makefile.in: Regenerate.
 516
 517 2001-07-03  Zoltan Hidvegi <hzoli@hzoli.2y.net>
 518
 519         * ppc-opc.c: Fix encoding of 'clf' instruction.
 520
 521 2001-06-30  Geoffrey Keating  <geoffk@redhat.com>
 522
 523         * cgen-ibld.in (insert_normal): Support CGEN_IFLD_SIGN_OPT.
 524
 525 2001-06-28  Geoffrey Keating  <geoffk@redhat.com>
 526
 527         * cgen-asm.c (cgen_parse_keyword): Allow any first character.
 528         * cgen-opc.c (cgen_keyword_add): Ignore special first
 529         character when building nonalpha_chars field.
 530
 531 2001-06-24  Ben Elliston  <bje@redhat.com>
 532
 533         * m88k-dis.c: Format to conform to GNU coding standards.
 534
 535 2001-06-23  Andreas Jaeger  <aj@suse.de>
 536
 537         * disassemble.c (disassembler_usage): Add unused attribute.
 538
 539 2001-06-22  Eric Christopher  <echristo@redhat.com>
 540
 541         * mips-opc.c: Move prefx to start of the table.
 542
 543 2001-06-22  Stacey Sheldon <ssheldon@Catena.com>
 544
 545         * arc-opc.c (insert_st_syntax): Fix over-optimisation of ST
 546         instruction.
 547
 548 2001-06-22  Pauli <pauli@moreton.com.au>
 549
 550         * m68k-opc.c: Add wdebug instruction.
 551
 552 2001-06-15  Aldy Hernandez  <aldyh@redhat.com>
 553
 554         * m10300-opc.c (mn10300_opcodes): Change opcode for AM33 subc.
 555
 556 2001-06-14  Geoffrey Keating  <geoffk@redhat.com>
 557
 558         * cgen-asm.c (cgen_parse_keyword): When looking for the
 559         boundaries of a keyword, allow any special characters
 560         that are actually in one of the allowed keyword.
 561         * cgen-opc.c (cgen_keyword_add): Add any special characters
 562         to the nonalpha_chars field.
 563
 564 2001-06-12  Martin Schwidefsky <schwidefsky@de.ibm.com>
 565
 566         * s390-opc.c: Add lgh instruction.
 567         * s390-opc.txt: Likewise.
 568
 569 2001-06-11  Alan Modra  <amodra@bigpond.net.au>
 570
 571         * i386-dis.c: Group function prototypes in one place.
 572         (FLOATCODE): Redefine as 1.
 573         (USE_GROUPS): Redefine as 2.
 574         (USE_PREFIX_USER_TABLE): Redefine as 3.
 575         (X86_64_SPECIAL): Define as 4.
 576         (GRP1b..GRPAMD): Move USE_GROUPS to bytecode1, index to bytecode2.
 577         (PREGRP0..PREGRP26): Similarly with USE_PREFIX_USER_TABLE.
 578         (dis386_att, dis386_intel, disx86_64_att, disx86_64_intel): Delete.
 579         (dis386): New table combining above four tables.
 580         (dis386_twobyte_att, dis386_twobyte_intel): Delete.
 581         (dis386_twobyte): New table combining above two tables.
 582         (x86_64_table): New table to handle x86_64.
 583         (X86_64_0): Define.
 584         (float_mem_att, float_mem_intel): Delet.
 585         (float_mem): New table combining above two tables.
 586         (print_insn_i386): Modify for above.
 587         (dofloat): Likewise.
 588         (putop): Handle '{', '|' and '}' to select alternative mnemonics.
 589         Return 0 on success, 1 if no valid alternative.
 590         (putop <case 'F'>, <case 'H'>): Print nothing for intel_syntax.
 591         (putop <case 'T'>): Move to case 'U', and share case 'Q' code.
 592         (putop <case 'I'>): Move to case 'T', and share case 'P' code.
 593         (OP_REG <case rAX_reg .. rDI_reg>): Handle as for eAX_reg .. eDI_reg
 594         if not 64-bit mode.
 595         (OP_I <case q_mode>): Handle as for v_mode if not 64-bit mode.
 596         (OP_I64): If not 64-bit mode, call OP_I.
 597         OP_OFF64): If not 64-bit mode, call OP_OFF.
 598         (OP_ST, OP_STi, OP_SEG, OP_DIR, OP_OFF, OP_OFF64, OP_MMX): Rename
 599         'ignore'/'ignored' to 'bytemode'.
 600
 601 2001-06-10  Alan Modra  <amodra@bigpond.net.au>
 602
 603         * configure.in: Sort 'ta' case statement.
 604         * configure: Regenerate.
 605
 606         * i386-dis.c (dis386_att): Add 'H' to conditional branch and
 607         loop,jcxz insns.
 608         (disx86_64_att): Likewise.
 609         (dis386_twobyte_att): Likewise.
 610         (print_insn_i386): Don't print branch hints as a prefix.
 611         (putop): 'H' macro prints branch hints.
 612         (get64): Kill compile warnings.
 613
 614 2001-06-09  Alexandre Oliva  <aoliva@redhat.com>
 615
 616         * sh-opc.h (sh_table): Don't use empty initializers.
 617
 618 2001-06-06  Christian Groessler <cpg@aladdin.de>
 619
 620         * z8k-dis.c: Fix formatting.
 621         (unpack_instr): Remove unused cases in switch statement. Add
 622         safety abort() in default case.
 623         (unparse_instr): Add safety abort() in default case.
 624
 625 2001-06-06  Peter Jakubek <pjak@snafu.de>
 626
 627         * m68k-dis.c (print_insn_m68k): Fix typo.
 628         * m68k-opc.c (m68k_opcodes): Correct allowed operands for
 629         mcf (ColdFire) div, rem and moveb instructions.
 630
 631 2001-06-06  Alan Modra  <amodra@bigpond.net.au>
 632
 633         * i386-dis.c (cond_jump_flag, loop_jcxz_flag): Define.
 634         (cond_jump_mode, loop_jcxz_mode): Define.
 635         (dis386_att): Add cond_jump_flag and loop_jcxz_flag as
 636         appropriate, and 'F' suffix to loop insns.
 637         (disx86_64_att): Likewise.
 638         (dis386_twobyte_att): Likewise.
 639         (print_insn_i386): Don't output addr prefix for loop, jcxz insns.
 640         Output data size prefix for long conditional jumps.  Output cs and
 641         ds branch hints.
 642         (putop): Handle 'F', and mark PREFIX_ADDR used for case 'E'.
 643         (OP_J): Don't make PREFIX_DATA used.
 644
 645 2001-06-04  Alexandre Oliva  <aoliva@redhat.com>
 646
 647         * sh-opc.h (sh_table): Complete last element entry to avoid
 648         compiler warning.
 649
 650 2001-05-16  Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
 651
 652         * mips-dis.c (mips_isa_type): Add MIPS r12k support.
 653
 654 2001-05-23  Alan Modra  <amodra@one.net.au>
 655
 656         * arc-opc.c: Whitespace changes.
 657
 658 2001-05-18  Hans-Peter Nilsson  <hp@axis.com>
 659
 660         * cris-opc.c (cris_spec_regs): Add missing initializer field for
 661         last element.
 662
 663 2001-05-15  Frank Ch. Eigler  <fche@redhat.com>
 664
 665         * cgen-dis.in (extract_normal): Complete support for min<base case.
 666
 667 2001-05-15  Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
 668
 669         * mips-dis.c (INSNLEN): Rename MAXLEN.
 670         (std_reg_names): Replace by mips32_reg_names and mips64_reg_names.
 671         (print_insn_arg): Remove $ prefix of register names.
 672         (set_mips_isa_type): Remove.
 673         (mips_isa_type): New function.
 674         (get_mips_isa): New Function.
 675         (print_insn_mips): Rename _print_insn_mips.
 676         (_print_insn_mips): New function, contains code which was
 677         duplicated in print_insn_big_mips and print_insn_little_mips.
 678         (print_insn_big_mips): Moved code to _print_insn_mips.
 679         (print_insn_little_mips): Likewise.
 680         (print_mips16_insn_arg): Remove $ prefix of register names.
 681         Print error message before abort.
 682
 683 2001-05-14  J.T. Conklin  <jtc@redback.com>
 684
 685         * ppc-opc.c (powerpc_opcodes): Fixed extended opcode field of
 686         simplified mnemonics used for setting PPC750-specific special
 687         purpose registers.
 688
 689 2001-05-12  H.J. Lu  <hjl@gnu.org>
 690
 691         * i386-dis.c (print_insn_i386): Always set `mod', `reg' and
 692         `rm'.
 693
 694 2001-05-12  Peter Targett  <peter.targett@arccores.com>
 695
 696         * arc-opc.c (arc_reg_names): Correct attribute for lp_count
 697         register to r/w.  Formatting fixes throughout file.
 698
 699 2001-05-12  Alan Modra  <amodra@one.net.au>
 700
 701         * i386-dis.c (prefix_user_table): Correct movq2dq, movdq2q, and
 702         movq operands.
 703         (twobyte_has_modrm): Update table.
 704         (need_modrm): Give it file scope.
 705         (MODRM_CHECK): Define.
 706         (dofloat): Use MODRM_CHECK.
 707         (OP_E): Likewise.
 708         (OP_EM): Likewise.
 709         (OP_EX): Likewise.
 710
 711 2001-05-07  Frank Ch. Eigler  <fche@redhat.com>
 712
 713         * cgen-dis.in (default_print_insn): Tolerate min<base instructions
 714         even at end of a section.
 715         * cgen-ibld.in (extract_normal): Tolerate min!=base!=max instructions
 716         by ignoring precariously-unpacked insn_value in favor of raw buffer.
 717
 718 2001-05-03  Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
 719
 720         * disassemble.c (disassembler_usage): Remove unused attribute.
 721
 722 2001-05-04  Frank Ch. Eigler  <fche@redhat.com>
 723
 724         * m32r-dis.c, -asm.c, -ibld.c: Regenerated with disassembler fixes.
 725
 726 2001-05-04  Frank Ch. Eigler  <fche@redhat.com>
 727
 728         * cgen-dis.in (print_insn): Remove call to read_insn.  Instead,
 729         assume incoming buffer already has the base insn loaded.  Handle
 730         smaller-than-base instructions for variable-length case.
 731
 732 2001-05-04  Alan Modra  <amodra@one.net.au>
 733
 734         * i386-dis.c (Ev, Ed): Remove duplicate define.
 735         (Gd): Define.
 736         (XS): Define.
 737         (OP_XS): New function.
 738         (dis386_twobyte_att): Correct pinsrw, pextrw, pmovmskb, and
 739         movmskp operands.
 740         (dis386_twobyte_intel): Likewise.
 741         (prefix_user_table): Use MS for maskmovq operand.
 742
 743 2001-04-27  Johan Rydberg  <jrydberg@opencores.org>
 744
 745         * Makefile.am: Add OpenRISC target.
 746         * Makefile.in: Regenerated.
 747
 748         * disassemble.c (disassembler): Recognize the OpenRISC disassembly.
 749
 750         * configure.in (bfd_openrisc_arch): Add target.
 751         * configure: Regenerated.
 752
 753         * openrisc-asm.c: New file.
 754         * openrisc-desc.c: Likewise.
 755         * openrisc-desc.h: Likewise.
 756         * openrisc-dis.c: Likewise.
 757         * openrisc-ibld.c: Likewise.
 758         * openrisc-opc.c: Likewise.
 759         * openrisc-opc.h: Likewise.
 760
 761 2001-04-24  Christian Groessler  <cpg@aladdin.de>
 762
 763         * z8k-dis.c: add names of control registers (ctrl_names);
 764         (seg_length): provides instruction length fixup for segmented
 765         mode; (unpack_instr): correctly handle ARG_DISP16, ARG_DISP12,
 766         CLASS_0DISP7, CLASS_1DISP7, CLASS_DISP8 and CLASS_PR cases;
 767         (unparse_intr): handle CLASS_PR, print addresses without '#'
 768         * z8k-opc.h: re-created with new z8kgen
 769         * z8kgen.c: merged in fixes which were in existing z8k-opc.h; new
 770         entries for ldctl/ldctlb instruction
 771
 772 2001-04-06  Andreas Jaeger  <aj@suse.de>
 773
 774         * i386-dis.c: Add ffreep instruction.
 775
 776 2001-03-30  Alexandre Oliva  <aoliva@redhat.com>
 777
 778         * ppc-opc.c (insert_mbe): Shift mask initializer as long.
 779
 780 2001-03-24  Alan Modra  <alan@linuxcare.com.au>
 781
 782         * i386-dis.c (PREGRP25): Define.
 783         (dis386_twobyte_att): Use here in place of "movntq" entry.
 784         (dis386_twobyte_intel): Likewise.
 785         (prefix_user_table): Add PREGRP25 entry for "movntq" and "movntdq".
 786         (PREGRP26): Define.
 787         (dis386_twobyte_att): Use here.
 788         (dis386_twobyte_intel): Likewise.
 789         (prefix_user_table): Add PREGRP26 entry for "punpcklqdq".
 790         (prefix_user_table <maskmovdqu>): XM operand, not MX.
 791         (prefix_user_table): Cosmetic changes to "bad" entries.
 792
 793 2001-03-23  Nick Clifton  <nickc@redhat.com>
 794
 795         * mips-opc.c: Remove extraneous whitespace.
 796         * mips-dis.c: Remove extraneous whitespace.
 797
 798 2001-03-22  Ben Elliston  <bje@redhat.com>
 799
 800         * cgen-asm.in (@arch@_cgen_assemble_insn): Move tmp_errmsg
 801         declaration inside CGEN_VERBOSE_ASSEMBLER_ERRORS conditional.
 802         * cgen-ibld.in (put_insn_int_value): Mark cd parameter as unused
 803         to allay a compiler warning.
 804
 805 2001-03-22  Alan Modra  <alan@linuxcare.com.au>
 806
 807         * i386-dis.c (dis386_twobyte_att): Add entries for paddq, psubq.
 808         (dis386_twobyte_intel): Likewise.
 809         (twobyte_has_modrm): Set entry for paddq, psubq.
 810
 811 2001-03-20  Patrick Macdonald  <patrickm@redhat.com>
 812
 813         * cgen-dis.in (print_insn_@arch@): Add support for target machine
 814         determination via CGEN_COMPUTE_MACH.
 815         * fr30-desc.c: Regenerate.
 816         * fr30-dis.c: Regenerate.
 817         * fr30-opc.h: Regenerate.
 818         * m32r-desc.c: Regenerate.
 819         * m32r-dis.c: Regenerate.
 820         * m32r-opc.h: Regenerate.
 821         * m32r-opinst.c: Regenerate.
 822
 823 2001-03-20  H.J. Lu  <hjl@gnu.org>
 824
 825         * configure.in: Remove the redundent AC_ARG_PROGRAM.
 826         * configure: Rebuild.
 827
 828 2001-03-19  Jim Wilson  <wilson@redhat.com>
 829
 830         * ia64-gen.c (fetch_insn_class): If xsect, then ignore comment and
 831         notestr if larger than xsect.
 832         (in_class): Handle format M5.
 833         * ia64-asmtab.c: Regnerate.
 834
 835 2001-03-19  John David Anglin  <dave@hiauly1.hia.nrc.ca>
 836
 837         * vax-dis.c (print_insn_vax): Only fetch two bytes if the info buffer
 838         has more than one byte left to read.
 839
 840 2001-03-16  Martin Schwidefsky  <schwidefsky@de.ibm.com>
 841
 842         * s390-opc.c: Add new opcodes.  Smooth out formatting.
 843         * s390-opc.txt: Add new opcodes.
 844
 845 2001-03-06  Nick Clifton  <nickc@redhat.com>
 846
 847         * arm-dis.c (print_insn_thumb): Compute destination address
 848         of BLX(1) instruction by taking bit 1 from PC and not from bit
 849         0 of the offset.
 850
 851 2001-03-06  Igor Shevlyakov  <igor@windriver.com>
 852
 853         * m68k-dis.c (print_insn_m68k): Recognize Coldfire CPUs
 854         so command line switches will work.
 855
 856 2001-03-05  Dave Brolley  <brolley@redhat.com>
 857
 858         * fr30-asm.c: Regenerate.
 859         * fr30-desc.c: Regenerate.
 860         * fr30-desc.h: Regenerate.
 861         * fr30-dis.c: Regenerate.
 862         * fr30-ibld.c: Regenerate.
 863         * fr30-opc.c: Regenerate.
 864         * fr30-opc.h: Regenerate.
 865         * m32r-asm.c: Regenerate.
 866         * m32r-desc.c: Regenerate.
 867         * m32r-desc.h: Regenerate.
 868         * m32r-dis.c: Regenerate.
 869         * m32r-ibld.c: Regenerate.
 870         * m32r-opc.c: Regenerate.
 871         * m32r-opc.h: Regenerate.
 872         * m32r-opinst.c: Regenerate.
 873
 874 2001-02-28  Igor Shevlyakov  <igor@windriver.com>
 875
 876         * m68k-opc.c: fix cpushl according to Motorola. Enable
 877         bunch of instructions for Coldfire 5407 and add all new.
 878
 879 2001-02-27  Alan Modra  <alan@linuxcare.com.au>
 880
 881         * configure.in (BFD_VERSION): Do without grep.
 882         * configure: Regenerate.
 883         * Makefile.am: Run "make dep-am".
 884         * Makefile.in: Regenerate.
 885
 886 2001-02-23  David Mosberger  <davidm@hpl.hp.com>
 887
 888         * ia64-opc-a.c: Add missing pseudo-ops for "cmp" and "cmp4".
 889         * ia64-asmtab.c: Regenerate.
 890
 891 2001-02-21  David Mosberger  <davidm@hpl.hp.com>
 892
 893         * ia64-opc-d.c (ia64_opcodes_d): Break the "add" pattern into two
 894         separate variants: one for IMM22 and the other for IMM14.
 895         * ia64-asmtab.c: Regenerate.
 896
 897 2001-02-21  Greg McGary  <greg@mcgary.org>
 898
 899         * cgen-opc.c (cgen_get_insn_value): Add missing `return'.
 900
 901 2001-02-20  H.J. Lu  <hjl@gnu.org>
 902
 903         * Makefile.am (ia64-ic.tbl): Remove the target.
 904         (ia64-raw.tbl): Likewise.
 905         (ia64-waw.tbl): Likewise.
 906         (ia64-war.tbl): Likewise.
 907         (ia64-asmtab.c): Generate it in the source directory.
 908         * Makefile.in: Regenerated.
 909
 910 2001-02-18  lars brinkhoff  <lars@nocrew.org>
 911
 912         * Makefile.am: Add PDP-11 target.
 913         * configure.in: Likewise.
 914         * disassemble.c: Likewise.
 915         * pdp11-dis.c: New file.
 916         * pdp11-opc.c: New file.
 917
 918 2001-02-14  Jim Wilson  <wilson@redhat.com>
 919
 920         * ia64-ic.tbl: Update from Intel.  Add setf to fr-writers.
 921         * ia64-asmtab.c: Regenerate.
 922
 923 Mon Feb 12 17:41:26 CET 2001  Jan Hubicka  <jh@suse.cz>
 924
 925         * i386-dis.c (prefix_user_t): Add 'Y' to SSE ineger converison
 926         instructions.
 927         (putop): Handle 'Y'
 928
 929 2001-02-11  Maciej W. Rozycki  <macro@ds2.pg.gda.pl>
 930
 931         * mips-dis.c (print_insn_arg): Use top four bits of the address of
 932         the following instruction not of the jump itself for the jump
 933         target.
 934         (print_mips16_insn_arg): Likewise.
 935
 936 2001-02-11  Michael Sokolov  <msokolov@ivan.Harhan.ORG>
 937
 938         * Makefile.am (stamp-lib): ranlib the libopcodes.a in the build
 939         directory.
 940         * Makefile.in: Regenerate.
 941
 942 2001-02-09  Schwidefsky  <schwidefsky@de.ibm.com>
 943
 944         * Makefile.am: Add linux target for S/390.
 945         * Makefile.in: Likewise.
 946         * configure.in: Likewise.
 947         * disassemble.c: Likewise.
 948         * s390-dis.c: New file.
 949         * s390-mkopc.c: New file.
 950         * s390-opc.c: New file.
 951         * s390-opc.txt: New file.
 952
 953 2001-02-05  Jim Wilson  <wilson@redhat.com>
 954
 955         * ia64-asmtab.c: Revert 2000-12-16 change.
 956
 957 2001-02-02  Patrick Macdonald  <patrickm@redhat.com>
 958
 959         * fr30-desc.h: Regenerate with CGEN_MAX_SYNTAX_ELEMENTS.
 960         * m32r-desc.h: Regenerate.
 961
 962 Thu Feb  1 16:29:06 MET 2001  Jan Hubicka  <jh@suse.cz>
 963
 964         * i386-dis.c (dis386_att, grps): Use 'T' for push/pop
 965         (putop): Handle 'T', alphabetize order, fix 'I' handling in Intel syntax
 966
 967 2001-01-14  Alan Modra  <alan@linuxcare.com.au>
 968
 969         * hppa-dis.c (print_insn_hppa): Handle '>' and '<' arg types.
 970
 971 2001-01-13  Nick Clifton  <nickc@redhat.com>
 972
 973         * disassemble.c: Remove spurious white space.
 974
 975 Sat Jan 13 01:48:24 MET 2001  Jan Hubicka  <jh@suse.cz>
 976
 977         * i386-dis.c (dis386_att, disx86_64_att): Fix ret, lret and iret
 978         templates.
 979
 980 2001-01-11  Peter Targett  <peter.targett@arccores.com>
 981
 982         * configure.in: Add arc-ext.lo for bfd_arc_arch selection.
 983         * Makefile.am (C_FILES): Add arc-ext.c.
 984         (ALL_MACHINES) Add arc-ext.lo.
 985         (INCLUDES) Add opcode directory to list.
 986         New dependency entry for arc-ext.lo.
 987         * disassemble.c (disassembler): Correct call to
 988         arc_get_disassembler.
 989         * arc-opc.c: New update for ARC, including full base
 990         instructions for ARC variants.
 991         * arc-dis.h, arc-dis.c: New update for ARC, including
 992         extensibility functionality.
 993         * arc-ext.h, arc-ext.c: New files for handling extensibility.
 994
 995 2001-01-10  Jan Hubicka  <jh@suse.cz>
 996
 997         * i386-dis.c (PREGRP15 - PREGRP24): New.
 998         (dis386_twobyt): Add SSE2 instructions.
 999         (twobyte_uses_SSE_prefix: Rename from ... ; add new SSE instructions.
1000         (twobyte_uses_f3_prefix): ... this one.
1001         (grps): Add SSE instructions.
1002         (prefix_user_table): Add two new slots; add SSE2 instructions.
1003         (print_insn_i386): Rename uses_f3_prefix to uses_SSE_prefix;
1004         Handle the REPNZ and Data16 prefixes as well; do proper lookup
1005         to prefix_user_table.
1006         (OP_E): Accept mfence and lfence as well.
1007         (OP_MMX): Data16 prefix turns MMX to SSE; support REX extensions.
1008         (OP_XMM): Support REX extensions.
1009         (OP_EM): Likewise.
1010         (OP_EX): Likewise.
1011
1012 2001-01-09  Nick Clifton  <nickc@redhat.com>
1013
1014         * arm-dis.c (print_insn): Set pc to zero for instructions with
1015         a reloc associated with them.
1016
1017 2001-01-09  Jeff Johnston  <jjohnstn@redhat.com>
1018
1019         * cgen-asm.in (parse_insn_normal): Changed syn to be
1020         CGEN_SYNTAX_CHAR_TYPE.  Changed all references to *syn
1021         as character to use CGEN_SYNTAX_CHAR macro and all comparisons
1022         to '\0' to use 0 instead.
1023         * cgen-dis.in (print_insn_normal): Ditto.
1024         * cgen-ibld.in (insert_insn_normal, extract_insn_normal): Ditto.
1025
1026 2001-01-05  Jan Hubicka  <jh@suse.cz>
1027
1028         * i386-dis.c: Add x86_64 support.
1029         (rex): New static variable.
1030         (REX_MODE64, REX_EXTX, REX_EXTY, REX_EXTZ): New constants.
1031         (USED_REX): New macro.
1032         (Ev, Ed, Rm, Iq, Iv64, Cm, Dm, Rm*, Ob64, Ov64): New macros.
1033         (OP_I64, OP_OFF64, OP_IMREG): New functions.
1034         (OP_REG, OP_OFF): Declare.
1035         (get64, get32, get32s): New functions.
1036         (r??_reg): New constants.
1037         (dis386_att): Change templates of instruction implicitly promoted
1038         to 64bit; change e?? to RMe?? for unwind RM byte instructions.
1039         (grps): Likewise.
1040         (dis386_intel): Likewise.
1041         (dixx86_64_att): New table based on dis386_att.
1042         (dixx86_64_intel): New table based on dis386_intel.
1043         (names64, names8rex): New global variable.
1044         (names32, names16): Add extended registers.
1045         (prefix_user_t): Recognize rex prefixes.
1046         (prefix_name): Print REX prefixes nicely.
1047         (op_riprel): New global variable.
1048         (start_pc): Set type to bfd_vma.
1049         (print_insn_i386): Detect the 64bit mode and use proper table;
1050         move ckprefix after initializing the buffer; output unused rex prefixes;
1051         output information about target of RIP relative addresses.
1052         (putop): Support 'O' and 'I'. Update handling of "P', 'Q', 'R' and 'S';
1053         (print_operand_value): New function.
1054         (OP_E, OP_G, OP_REG, OP_I, OP_J, OP_DIR, OP_OFF, OP_D): Add support for
1055         REX prefix and new modes.
1056         (get64, get32s): New.
1057         (get32): Return bfd_signed_vma type.
1058         (set_op): Initialize the op_riprel.
1059         * disassemble.c (disassembler): Recognize the x86-64 disassembly.
1060
1061 2001-01-03  Richard Sandiford  <r.sandiford@redhat.com>
1062
1063          cgen-dis.in (read_insn): Use bfd_get_bits()
1064
1065 2001-01-02  Richard Sandiford  <rsandifo@redhat.com>
1066
1067         * cgen-dis.c (hash_insn_array): Use bfd_put_bits().
1068         (hash_insn_list): Likewise
1069         * cgen-ibld.in (insert_1): Use bfd_put_bits() and bfd_get_bits().
1070         (extract_1): Use bfd_get_bits().
1071         (extract_normal): Apply sign extension to both extraction
1072         methods.
1073         * cgen-opc.c (cgen_get_insn_value): Use bfd_get_bits()
1074         (cgen_put_insn_value): Use bfd_put_bits()
1075
1076 2000-12-28  Frank Ch. Eigler  <fche@redhat.com>
1077
1078         * cgen-asm.in (parse_insn_normal): Print better error message for
1079         instructions with missing operands.
1080
1081 2000-12-21  Santeri Paavolainen <santtu@ssh.com>
1082
1083         * cgen-opc.c: Include alloca.h if HAVE_ALLOCA_H is defined.
1084
1085 2000-12-16  Nick Clifton  <nickc@redhat.com>
1086
1087         * Makefile.in: Regenerate.
1088         * aclocal.m4: Regenerate.
1089         * config.in: Regenerate.
1090         * configure.in: Add spacing.
1091         * configure: Regenerate.
1092         * ia64-asmtab.c: Regenerate.
1093         * po/opcodes.pot: Regenerate.
1094
1095 2000-12-12  Frank Ch. Eigler  <fche@redhat.com>
1096
1097         * cgen-asm.in (@arch@_cgen_assemble_insn): Prefer printing insert-time
1098         error messages over later parse-time ones.
1099
1100 2000-12-12  Jim Wilson  <wilson@redhat.com>
1101
1102         * ia64-dis.c (print_insn_ia64): Cast away const on ia64_free_opcode
1103         argument.
1104         * ia64-gen.c (insert_deplist): Cast sizeof result to int.
1105         (print_dependency_table): Print NULL if semantics field not set.
1106         (insert_opcode_dependencies): Mark cmp parameter as unused.
1107         (print_main_table): Use fprintf_vma to print long long fields.
1108         (main): Mark argv paramter as unused.  Convert to old style definition.
1109         * ia64-opc.c (ia64_find_dependency): Cast sizeof result to int.
1110         * ia64-asmtab.c: Regnerate.
1111
1112 2000-12-09  Nick Clifton  <nickc@redhat.com>
1113
1114         * m32r-dis.c (print_insn): Prevent re-read of instruction from
1115         wrong address.
1116
1117         * fr30-dis.c: Regenerate.
1118
1119 2000-12-08  Peter Targett  <peter.targett@arccores.com>
1120
1121         * configure.in: Add arc-ext.lo for bfd_arc_arch selection.
1122         * Makefile.am (C_FILES): Add arc-ext.c.
1123         (ALL_MACHINES) Add arc-ext.lo.
1124         (INCLUDES) Add opcode directory to list.
1125         New dependency entry for arc-ext.lo.
1126         * disassemble.c (disassembler): Correct call to
1127         arc_get_disassembler.
1128         * arc-opc.c: New update for ARC, including full base
1129         instructions for ARC variants.
1130         * arc-dis.h, arc-dis.c: New update for ARC, including
1131         extensibility functionality.
1132         * arc-ext.h, arc-ext.c: New files for handling extensibility.
1133
1134 2000-12-03  Chris Demetriou   cgd@sibyte.com
1135
1136         * mips-opc.c (mips_builtin_opcodes): Use the WR_HILO, RD_HILO,
1137         MOD_HILO, and MOD_LO macros.
1138
1139         * mips-opc.c (M1, M2): Delete.
1140         (mips_builtin_opcodes): Remove all uses of M1.
1141
1142         * mips-opc.c (mips_builtin_opcodes): Make the dmfc2 and dmtc2
1143         instructions take "G" format second operands and use the
1144         correct flags.
1145         There are mfc3 and mtc3 opcodes, so add dmfc3 and dmtc3 opcodes to
1146         match.
1147         Delete "sel" code operands from mfc1 and mtc1.
1148         Add MIPS64 opcode changes (dclo, dclz), and "sel" code variants
1149         for dm[ft]c[023].
1150
1151 2000-12-03  Ed Satterthwaite  ehs@sibyte.com  and
1152             Chris Demetriou   cgd@sibyte.com
1153
1154         * mips-opc.c (mips_builtin_opcodes): Finish additions
1155         for MIPS32 support, and clean up existing entries for
1156         aesthetics, consistency with the MIPS32 ISA, and
1157         with consistency the rest of the table.
1158
1159 2000-12-01  Nick Clifton  <nickc@redhat.com>
1160
1161         * mips16-opc.c (mips16_opcodes): Add initialiser for membership
1162         field.
1163
1164 2000-12-01  Chris Demetriou <cgd@sibyte.com>
1165
1166         mips-dis.c (print_insn_arg): Handle new 'U' and 'J' argument
1167         specifiers.  Update 'B' for new constant names, and remove
1168         'm'.
1169         mips-opc.c (mips_builtin_opcodes): Place "pref" and "ssnop"
1170         near the top of the array, so they are disassembled properly.
1171         Enable "ssnop" for MIPS32.  Add "break" variant with 20 bit
1172         code for MIPS32.  Update "clo" and "clz" to use 'U' operand
1173         specifier.  Add 'H' format specifier variants for "mfc1,"
1174         "mfc2," "mfc3," "mtc1," "mtc2," and "mtc3" for MIPS32.  Update
1175         MIPS32 "sdbbp" to use 'B' operand specifier.  Add MIPS32
1176         "wait" variant which uses 'J' operand specifier.
1177
1178         * mips-dis.c (set_mips_isa_type): Update to use
1179         CPU_UNKNOWN and ISA_* constants.  Add bfd_mach_mips32 case.
1180         Replace bfd_mach_mips4K with bfd_mach_mips32_4k case.
1181         * mips-opc.c (I32): New constant for instructions added in
1182         MIPS32.
1183         (P4): Delete.
1184         (mips_builtin_opcodes) Replace all uses of P4 with I32.
1185
1186         * mips-dis.c (set_mips_isa_type): Add cases for
1187         bfd_mach_mips5 and bfd_mach_mips64.
1188         * mips-opc.c (I64): New definitions.
1189
1190         * mips-dis.c (set_mips_isa_type): Add case for
1191         bfd_mach_mips_sb1.
1192
1193 2000-11-28  Hans-Peter Nilsson  <hp@bitrange.com>
1194
1195         * sh-dis.c (print_insn_ddt): Make insn_x, insn_y unsigned.
1196         (print_insn_ppi): Make nib1, nib2, nib3 unsigned.
1197         Initialize variable dc to NULL.
1198         (print_insn_shx): Remove unused label d_reg_n.
1199
1200 2000-11-24  Nick Clifton  <nickc@redhat.com>
1201
1202         * arm-opc.h: Add new opcode formatting parameter 'B'.
1203         (arm_opcodes): Add XScale, v5, and v5te instructions.
1204         (thumb_opcodes): Add v5t instructions.
1205
1206         * arm-dis.c (print_insn_arm): Handle new 'B' format
1207         parameter.
1208         (print_insn_thumb): Decode BLX(1) instruction.
1209
1210 2000-11-21  Chris Demetriou  <cgd@sibyte.com>
1211
1212         * mips-opc.c: Fix file header comment.
1213
1214 2000-11-14  Hans-Peter Nilsson  <hp@axis.com>
1215
1216         * cris-dis.c (cris_get_disassembler): If abfd is NULL, return
1217         print_insn_cris_with_register_prefix.
1218
1219 2000-11-11  Alexandre Oliva  <aoliva@redhat.com>
1220
1221         * sh-opc.h: The operand of `mov.w r0, (<disp>,GBR)' is IMM1, not 0.
1222
1223 2000-11-07  Matthew Green  <mrg@redhat.com>
1224
1225         * cgen-dis.in (print_insn): All insns which can fit into insn_value
1226         must be loaded there in their entirety.
1227
1228 2000-10-20  Jakub Jelinek  <jakub@redhat.com>
1229
1230         * sparc-dis.c (v9a_asr_reg_names): Add v9b ASRs.
1231         (compute_arch_mask): Add v8plusb and v9b machines.
1232         (print_insn_sparc): siam mode decoding, accept ASRs up to 25.
1233         * sparc-opc.c: Support for Cheetah instruction set.
1234         (prefetch_table): Add #invalidate.
1235
1236 2000-10-16  Nick Clifton  <nickc@redhat.com>
1237
1238         * mcore-dis.c (imsk): Change mask for OC to 0xFE00.
1239
1240 2000-10-06  Dave Brolley  <brolley@redhat.com>
1241
1242         * fr30-desc.h: Regenerate.
1243         * m32r-desc.h: Regenerate.
1244         * m32r-ibld.c: Regenerate.
1245
1246 2000-10-05  Jim Wilson  <wilson@redhat.com>
1247
1248         * ia64-ic.tbl: Update from Intel.
1249         * ia64-asmtab.c: Regenerate.
1250
1251 2000-10-04  Kazu Hirata  <kazu@hxi.com>
1252
1253         * ia64-gen.c: Convert C++-style comments to C-style comments.
1254         * tic54x-dis.c: Likewise.
1255
1256 2000-09-29  Hans-Peter Nilsson  <hp@axis.com>
1257
1258         Changes to add dollar prefix to registers for files where user symbols
1259         don't have a leading underscore.  Fix formatting.
1260         * cris-dis.c (REGISTER_PREFIX_CHAR): New.
1261         (format_reg): Add parameter with_reg_prefix.  All callers changed.
1262         (print_with_operands): Ditto.
1263         (print_insn_cris_generic): Renamed from print_insn_cris, add
1264         parameter with_reg_prefix.
1265         (print_insn_cris_with_register_prefix,
1266         print_insn_cris_without_register_prefix, cris_get_disassembler):
1267         New.
1268         * disassemble.c (disassembler) [ARCH_cris]: Call cris_get_disassembler.
1269
1270 2000-09-22  Jim Wilson  <wilson@redhat.com>
1271
1272         * ia64-opc-f.c (ia64_opcodes_f): Add fpcmp pseudo-ops for
1273         gt, ge, ngt, and nge.
1274         * ia64-asmtab.c: Regenerate.
1275
1276         * ia64-dis.c (print_insn_ia64): Revert Aug 7 byte skip count change.
1277         * ia64-gen.c (parse_semantics): Handle IA64_DVS_STOP.
1278         (lookup_specifier): Handle "PR%, 1 to 15" and "PR%, 16 to 62".
1279         * ia64-ic.tbl, ia64-raw.tbl, ia64-war.tbl, ia64-waw.tbl: Update.
1280         * ia64-asmtab.c: Regnerate.
1281
1282 2000-09-13  Anders Norlander  <anorland@acc.umu.se>
1283
1284         * mips-opc.c (mips_builtin_opcodes): Support cache instruction on 4K cores.
1285         Add mfc0 and mtc0 with sub-selection values.
1286         Add clo and clz opcodes.
1287         Add msub and msubu instructions for MIPS32.
1288         Add madd/maddu aliases for mad/madu for MIPS32.
1289         Support wait, deret, eret, movn, pref for MIPS32.
1290         Support tlbp, tlbr, tlbwi, tlbwr.
1291         (P4): New define.
1292
1293         * mips-dis.c (print_insn_arg): Print sdbbp 'm' args.
1294         (print_insn_arg): Handle 'H' args.
1295         (set_mips_isa_type): Recognize 4K.
1296         Use CPU_* defines instead of hardcoded numbers.
1297
1298 2000-09-11  Catherine Moore <clm@redhat.com>
1299
1300         * d30v-opc.c (d30v_operand_t): New operand type Rb2.
1301         (d30v_format_tab): Use Rb2 for modinc and moddec.
1302
1303 2000-09-07  Catherine Moore  <clm@redhat.com>
1304
1305         * d30v-opc.c (d30v_format_tab): Use format Ra for
1306         modinc and moddec.
1307
1308 2000-09-06  Alexandre Oliva  <aoliva@redhat.com>
1309
1310         * configure: Rebuilt with new libtool.m4.
1311
1312 2000-09-05  Nick Clifton  <nickc@redhat.com>
1313
1314         * configure: Regenerate.
1315         * po/opcodes.pot: Regenerate.
1316
1317 2000-08-31  Alexandre Oliva  <aoliva@redhat.com>
1318
1319         * acinclude.m4: Include libtool and gettext macros from the
1320         top level.
1321         * aclocal.m4, configure: Rebuilt.
1322
1323 2000-08-30  Kazu Hirata  <kazu@hxi.com>
1324
1325         * tic80-dis.c: Fix formatting.
1326
1327 2000-08-29  Kazu Hirata  <kazu@hxi.com>
1328
1329         * w65-dis.c: Fix formatting.
1330
1331 2000-08-28  Mark Hatle  <mhatle@mvista.com>
1332
1333         * ppc-opc.c: Add XTLB macro for a few PPC 4xx extended mnemonics.
1334         (powerpc_opcodes): Add table entries for PPC 405 instructions.
1335         Changed rfci, icbt, mfdcr, dccci, mtdcr, iccci from PPC to PPC403
1336         instructions.  Added extended mnemonic mftbl as defined in the
1337         405GP manual for all PPCs.
1338
1339 2000-08-28  Jim Wilson  <wilson@redhat.com>
1340
1341         * ia64-dis.c (print_insn_ia64): Add failed label after ia64_free_opcode
1342         call.  Change last goto to use failed instead of done.
1343
1344 2000-08-28  Dave Brolley  <brolley@redhat.com>
1345
1346         * cgen-ibld.in (cgen_put_insn_int_value): New function.
1347         (insert_normal): Allow for non-zero word_offset with CGEN_INT_INSN_P.
1348         (insert_insn_normal): Use cgen_put_insn_int_value with CGEN_INT_INSN_P.
1349         (extract_normal): Allow for non-zero word_offset with CGEN_INT_INSN_P.
1350         * cgen-dis.in (read_insn): New static function.
1351         (print_insn): Use read_insn to read the insn into the buffer and set
1352         up for disassembly.
1353         (print_insn): in CGEN_INT_INSN_P, make sure that the entire insn is
1354         in the buffer.
1355         * fr30-asm.c: Regenerated.
1356         * fr30-desc.c: Regenerated.
1357         * fr30-desc.h: Regenerated.
1358         * fr30-dis.c: Regenerated.
1359         * fr30-ibld.c: Regenerated.
1360         * fr30-opc.c: Regenerated.
1361         * fr30-opc.h: Regenerated.
1362         * m32r-asm.c: Regenerated.
1363         * m32r-desc.c: Regenerated.
1364         * m32r-desc.h: Regenerated.
1365         * m32r-dis.c: Regenerated.
1366         * m32r-ibld.c: Regenerated.
1367         * m32r-opc.c: Regenerated.
1368
1369 2000-08-28  Kazu Hirata  <kazu@hxi.com>
1370
1371         * tic30-dis.c: Fix formatting.
1372
1373 2000-08-27  Kazu Hirata  <kazu@hxi.com>
1374
1375         * sh-dis.c: Fix formatting.
1376
1377 2000-08-24  David Edelsohn  <dje@watson.ibm.com>
1378
1379         * ppc-opc.c (powerpc_opcodes): Add rfid, mtsrd, mtsrdin, mtmsrd.
1380
1381 2000-08-24  Kazu Hirata  <kazu@hxi.com>
1382
1383         * z8k-dis.c: Fix formatting.
1384
1385 2000-08-16  Jim Wilson  <wilson@redhat.com>
1386
1387         * ia64-ic.tbl (pr-readers-nobr-nomovpr): Add addl, adds.  Delete
1388         break, mov-immediate, nop.
1389         * ia64-opc-f.c: Delete fpsub instructions.
1390         * ia64-opc-m.c: Add POSTINC to all instructions with postincrement
1391         address operand.  Rewrite using macros to avoid long lines.
1392         * ia64-opc.h (POSTINC): Define.
1393         * ia64-asmtab.c: Regenerate.
1394
1395 2000-08-15  Jim Wilson  <wilson@redhat.com>
1396
1397         * ia64-ic.tbl: Add missing entries.
1398
1399 2000-08-08  Jason Eckhardt  <jle@redhat.com>
1400
1401         * i860-dis.c (print_br_address): Change third argument from int
1402         to long.
1403
1404 2000-08-07  Richard Henderson  <rth@redhat.com>
1405
1406         * ia64-dis.c (print_insn_ia64): Get byte skip count correct
1407         for MLI templates.  Handle IA64_OPND_TGT64.
1408
1409 2000-08-04  Ben Elliston  <bje@redhat.com>
1410
1411         * cgen-dis.in, cgen-asm.in, cgen-ibld.in: New files.
1412         * cgen.sh: Likewise.
1413
1414 2000-08-02  Jim Wilson  <wilson@redhat.com>
1415
1416         * ia64-dis.c (print_insn_ia64): Call ia64_free_opcode at end.
1417
1418 2000-07-29  Marek Michalkiewicz  <marekm@linux.org.pl>
1419
1420         * avr-dis.c (avr_operand): Use PARAMS macro in declaration.
1421         Change return type from void to int.  Check the combination
1422         of operands, return 1 if valid.  Fix to avoid BUF overflow.
1423         Report undefined combinations of operands in COMMENT.
1424         Report internal errors to stderr.  Output the adiw/sbiw
1425         constant operand in both decimal and hex.
1426         (print_insn_avr): Disassemble ldd/std with displacement of 0
1427         as ld/st.  Check avr_operand () return value, handle invalid
1428         combinations of operands like unknown opcodes.
1429
1430 2000-07-28  Ben Elliston  <bje@redhat.com>
1431
1432         * Makefile.am (CGEN, CGENDEPS, CGENDIR, CGENFLAGS): New.
1433         (run-cgen, stamp-m32r, stamp-fr30): New targets.
1434         * Makefile.in: Regenerate.
1435         * configure.in: Add --enable-cgen-maint option.
1436         * configure: Regenerate.
1437
1438 2000-07-26  Dave Brolley  <brolley@redhat.com>
1439
1440         * cgen-opc.c (cgen_hw_lookup_by_name): 'i' is now unsigned.
1441         (cgen_hw_lookup_by_num): Ditto.
1442         (cgen_operand_lookup_by_name): Ditto.
1443         (print_address): Ditto.
1444         (print_keyword): Ditto.
1445         * cgen-dis.c (hash_insn_array): Mark unused parameters with
1446         ATTRIBUTE_UNUSED.
1447         * cgen-asm.c (hash_insn_array): Mark unused parameters with
1448         ATTRIBUTE_UNUSED.
1449         (cgen_parse_keyword): Ditto.
1450
1451 2000-07-22  Jason Eckhardt  <jle@redhat.com>
1452
1453         * i860-dis.c: New file.
1454         (print_insn_i860): New function.
1455         (print_br_address): New function.
1456         (sign_extend): New function.
1457         (BITWISE_OP): New macro.
1458         (I860_REG_PREFIX): New macro.
1459         (grnames, frnames, crnames): New structures.
1460
1461         * disassemble.c (ARCH_i860): Define.
1462         (disassembler): Add check for bfd_arch_i860 to set disassemble
1463         function to print_insn_i860.
1464
1465         * Makefile.in (CFILES): Added i860-dis.c.
1466         (ALL_MACHINES): Added i860-dis.lo.
1467         (i860-dis.lo): New dependences.
1468
1469         * configure.in: New bits for bfd_i860_arch.
1470
1471         * configure: Regenerated.
1472
1473 2000-07-20  Hans-Peter Nilsson  <hp@axis.com>
1474
1475         * Makefile.am (CFILES): Add cris-dis.c and cris-opc.c.
1476         (ALL_MACHINES): Add cris-dis.lo and cris-opc.lo.
1477         (cris-dis.lo, cris-opc.lo): New rules.
1478         * Makefile.in: Rebuild.
1479         * configure.in (bfd_cris_arch): New target.
1480         * configure: Rebuild.
1481         * disassemble.c (ARCH_cris): Define.
1482         (disassembler): Support ARCH_cris.
1483         * cris-dis.c, cris-opc.c: New files.
1484         * po/POTFILES.in, po/opcodes.pot: Regenerate.
1485
1486 2000-07-11  Jakub Jelinek  <jakub@redhat.com>
1487
1488         * sparc-opc.c (sparc_opcodes): popc has 0 in rs1, not rs2.
1489         Reported by Bill Clarke <llib@computer.org>.
1490
1491 2000-07-09  Geoffrey Keating  <geoffk@redhat.com>
1492
1493         * ppc-opc.c (powerpc_opcodes): Correct suffix for vslw.
1494         Patch by Randall J Fisher <rfisher@ecn.purdue.edu>.
1495
1496 2000-07-09  Alan Modra  <alan@linuxcare.com.au>
1497
1498         * hppa-dis.c (fput_reg, fput_fp_reg, fput_fp_reg_r, fput_creg,
1499         fput_const, extract_3, extract_5_load, extract_5_store,
1500         extract_5r_store, extract_5R_store, extract_10U_store,
1501         extract_5Q_store, extract_11, extract_14, extract_16, extract_21,
1502         extract_12, extract_17, extract_22): Prototype.
1503         (print_insn_hppa): Rename inner block opcode -> opc to avoid
1504         shadowing outer block.
1505         (GET_BIT): Define.
1506
1507 2000-07-05  DJ Delorie  <dj@redhat.com>
1508
1509         * MAINTAINERS: new
1510
1511 2000-07-04  Alexandre Oliva  <aoliva@redhat.com>
1512
1513         * arm-dis.c (print_insn_arm): Output combinations of PSR flags.
1514
1515 2000-07-03  Marek Michalkiewicz  <marekm@linux.org.pl>
1516
1517         * avr-dis.c (avr_operand): Change _ () to _() around all strings
1518         marked for translation (exception from the usual coding style).
1519         (print_insn_avr): Initialize insn2 to avoid warnings.
1520
1521 2000-07-03  Kazu Hirata  <kazu@hxi.com>
1522
1523         * h8300-dis.c (bfd_h8_disassemble): Improve readability.
1524         * h8500-dis.c: Fix formatting.
1525
1526 2000-07-01  Alan Modra  <alan@linuxcare.com.au>
1527
1528         * Makefile.am (DEP): Fix 2000-06-22.  grep after running dep.sed
1529         (CLEANFILES): Add DEPA.
1530         * Makefile.in: Regenerate.
1531
1532 2000-06-26  Scott Bambrough  <scottb@netwinder.org>
1533
1534         * arm-dis.c (regnames): Add an additional register set to match
1535         the set used by GCC.  Make it the default.
1536
1537 2000-06-22  Alan Modra  <alan@linuxcare.com.au>
1538
1539         * Makefile.am (DEP): grep for leading `/' in DEP1, and fail if we
1540         find one.
1541         * Makefile.in: Regenerate.
1542
1543 2000-06-20  H.J. Lu  <hjl@gnu.org>
1544
1545         * Makefile.am: Rebuild dependency.
1546         * Makefile.in: Rebuild.
1547
1548 2000-06-18  Stephane Carrez  <stcarrez@worldnet.fr>
1549
1550         * Makefile.in, configure: regenerate
1551         * disassemble.c (disassembler): Recognize ARCH_m68hc12,
1552         ARCH_m68hc11.
1553         * m68hc11-dis.c (read_memory, print_insn, print_insn_m68hc12):
1554         New functions.
1555         * configure.in: Recognize m68hc12 and m68hc11.
1556         * m68hc11-dis.c, m68hc11-opc.c: New files for support of m68hc1x
1557         * Makefile.am (CFILES, ALL_MACHINES): New files for disassembly
1558         and opcode generation for m68hc11 and m68hc12.
1559
1560 2000-06-16  Nick Duffek  <nsd@redhat.com>
1561
1562         * disassemble.c (disassembler): Refer to the PowerPC 620 using
1563         bfd_mach_ppc_620 instead of 620.
1564
1565 2000-06-12  Kazu Hirata  <kazu@hxi.com>
1566
1567         * h8300-dis.c: Fix formatting.
1568         (bfd_h8_disassemble): Distinguish adds/subs, inc/dec.[wl]
1569         correctly.
1570
1571 2000-06-09  Denis Chertykov  <denisc@overta.ru>
1572
1573         * avr-dis.c (avr_operand): Bugfix for jmp/call address.
1574
1575 2000-06-07  Denis Chertykov  <denisc@overta.ru>
1576
1577         * avr-dis.c: completely rewritten.
1578
1579 2000-06-02  Kazu Hirata  <kazu@hxi.com>
1580
1581         * h8300-dis.c: Follow the GNU coding style.
1582         (bfd_h8_disassemble) Fix a typo.
1583
1584 2000-06-01  Kazu Hirata  <kazu@hxi.com>
1585
1586         * h8300-dis.c (bfd_h8_disassemble_init): Fix a typo.
1587         (bfd_h8_disassemble): Distinguish the operand size of inc/dev.[wl]
1588         correctly.  Fix a typo.
1589
1590 2000-05-31  Nick Clifton  <nickc@redhat.com>
1591
1592         * opintl.h (_(String)): Explain why dgettext is used instead of
1593         gettext.
1594
1595 2000-05-30  Nick Clifton  <nickc@redhat.com>
1596
1597         * opintl.h (gettext, dgettext, dcgettext, textdomain,
1598         bindtextdomain): Replace defines with those from intl/libgettext.h
1599         to quieten gcc warnings.
1600
1601 2000-05-26  Alan Modra  <alan@linuxcare.com.au>
1602
1603         * Makefile.am: Update dependencies with "make dep-am"
1604         * Makefile.in: Regenerate.
1605
1606 2000-05-25  Alexandre Oliva  <aoliva@redhat.com>
1607
1608         * m10300-dis.c (disassemble): Don't assume 32-bit longs when
1609         sign-extending operands.
1610
1611 2000-05-15  Donald Lindsay  <dlindsay@redhat.com>
1612
1613         * d10v-opc.c (d10v_opcodes): add ALONE tag to all short branches
1614         except brf's.
1615
1616 2000-05-21  Nick Clifton  <nickc@redhat.com>
1617
1618         * Makefile.am (LIBIBERTY): Define.
1619
1620 2000-05-19 Diego Novillo <dnovillo@redhat.com>
1621
1622         * mips-dis.c (REGISTER_NAMES): Rename to STD_REGISTER_NAMES.
1623         (STD_REGISTER_NAMES): New name for REGISTER_NAMES.
1624         (reg_names): Rename to std_reg_names. Change it to a char **
1625         static variable.
1626         (std_reg_names): New name for reg_names.
1627         (set_mips_isa_type): Set reg_names to point to std_reg_names by
1628         default.
1629
1630 2000-05-16  Frank Ch. Eigler  <fche@redhat.com>
1631
1632         * fr30-desc.h: Partially regenerated to account for changed
1633         CGEN_MAX_* -> CGEN_ACTUAL_MAX_* macros.
1634         * m32r-desc.h: Ditto.
1635
1636 2000-05-15  Nick Clifton  <nickc@redhat.com>
1637
1638         * arm-opc.h: Use upper case for flasg in MSR and MRS
1639         instructions.  Allow any bit to be set in the field_mask of
1640         the MSR instruction.
1641
1642         * arm-dis.c (print_insn_arm): Decode _x and _s bits of the
1643         field_mask of an MSR instruction.
1644
1645 2000-05-11  Thomas de Lellis  <tdel@windriver.com>
1646
1647         * arm-opc.h: Disassembly of thumb ldsb/ldsh
1648         instructions changed to ldrsb/ldrsh.
1649
1650 2000-05-11  Ulf Carlsson  <ulfc@engr.sgi.com>
1651
1652         * mips-dis.c (print_insn_arg): Don't mask top 32 bits of 64-bit
1653         target addresses for 'jal' and 'j'.
1654
1655 2000-05-10  Geoff Keating  <geoffk@redhat.com>
1656
1657         * ppc-opc.c (powerpc_opcodes): Make the predicted-branch opcodes
1658         also available in common mode when powerpc syntax is being used.
1659
1660 2000-05-08  Alan Modra  <alan@linuxcare.com.au>
1661
1662         * m68k-dis.c (dummy_printer): Add ATTRIBUTE_UNUSED to args.
1663         (dummy_print_address): Ditto.
1664
1665 2000-05-04  Timothy Wall  <twall@redhat.com>
1666
1667         * tic54x-opc.c: New.
1668         * tic54x-dis.c: New.
1669         * disassemble.c (disassembler): Add ARCH_tic54x.
1670         * configure.in: Added tic54x target.
1671         * configure: Ditto.
1672         * Makefile.am: Add tic54x dependencies.
1673         * Makefile.in: Ditto.
1674
1675 2000-05-03  J.T. Conklin  <jtc@redback.com>
1676
1677         * ppc-opc.c (VA, VB, VC, VD, VS, SIMM, UIMM, SHB): New macros, for
1678         vector unit operands.
1679         (VX, VX_MASK, VXA, VXA_MASK, VXR, VXR_MASK): New macros, for vector
1680         unit instruction formats.
1681         (PPCVEC): New macro, mask for vector instructions.
1682         (powerpc_operands): Add table entries for above operand types.
1683         (powerpc_opcodes): Add table entries for vector instructions.
1684
1685         * ppc-dis.c (print_insn_big_powerpc): Add PPC_OPCODE_ALTIVEC to mask.
1686         (print_insn_little_powerpc): Likewise.
1687         (print_insn_powerpc): Prepend 'v' when printing vector registers.
1688
1689 2000-04-24  Clinton Popetz  <cpopetz@redhat.com>
1690
1691         * configure.in: Add bfd_powerpc_64_arch.
1692         * disassemble.c (disassembler): Use print_insn_big_powerpc for
1693         64 bit code.
1694
1695 2000-04-24  Nick Clifton  <nickc@redhat.com>
1696
1697         * fr30-desc.c (fr30_cgen_cpu_open): Initialise signed_overflow
1698         field.
1699
1700 2000-04-23  Denis Chertykov  <denisc@overta.ru>
1701
1702         * avr-dis.c (reg_fmul_d): New. Extract destination register from
1703         FMUL instruction.
1704         (reg_fmul_r): New. Extract source register from FMUL instruction.
1705         (reg_muls_d): New. Extract destination register from MULS instruction.
1706         (reg_muls_r): New. Extract source register from MULS instruction.
1707         (reg_movw_d): New. Extract destination register from MOVW instruction.
1708         (reg_movw_r): New. Extract source register from MOVW instruction.
1709         (print_insn_avr): Handle MOVW, MULS, MULSU, FMUL, FMULS, FMULSU,
1710         EICALL, EIJMP, LPM r,Z, ELPM r,Z, SPM, ESPM instructions.
1711
1712 2000-04-22  Timothy Wall  <twall@redhat.com>
1713
1714         * ia64-gen.c (general): Add an ordered table of primary
1715         opcode names, as well as priority fields to disassembly data
1716         structures to enforce a preferred disassembly format based on the
1717         ordering of the opcode tables.
1718         (load_insn_classes): Show a useful message if IC tables are missing.
1719         (load_depfile): Ditto.
1720         * ia64-asmtab.h (struct ia64_dis_names ): Add priority flag to
1721         distinguish preferred disassembly.
1722         * ia64-opc-f.c: Reorder some insn for preferred disassembly
1723         format.  Fix incorrect flag on fma.s/fma.s.s0.
1724         * ia64-opc.c: Scan *all* disassembly matches and use the one with
1725         the highest priority.
1726         * ia64-opc-b.c: Use more abbreviations.
1727         * ia64-asmtab.c: Regenerate.
1728
1729 2000-04-21  Jason Eckhardt  <jle@redhat.com>
1730
1731         * hppa-dis.c (extract_16): New function.
1732         (print_insn_hppa): Fix incorrect handling of 'fe'. Added handling of
1733         new operand types l,y,&,fe,fE,fx.
1734
1735 2000-04-21  Richard Henderson  <rth@redhat.com>
1736             David Mosberger  <davidm@hpl.hp.com>
1737             Timothy Wall <twall@redhat.com>
1738             Bob Manson  <manson@charmed.cygnus.com>
1739             Jim Wilson  <wilson@redhat.com>
1740
1741         * Makefile.am (HFILES): Add ia64-asmtab.h, ia64-opc.h.
1742         (CFILES): Add ia64-dis.c, ia64-opc-a.c, ia64-opc-b.c, ia64-opc-f.c,
1743         ia64-opc-i.c, ia64-opc-m.c, ia64-opc-d.c, ia64-opc.c, ia64-gen.c,
1744         ia64-asmtab.c.
1745         (ALL_MACHINES): Add ia64-dis.lo, ia64-opc.lo.
1746         (ia64-ic.tbl, ia64-raw.tbl, ia64-waw.tbl, ia64-war.tbl, ia64-gen,
1747         ia64-gen.o, ia64-asmtab.c, ia64-dis.lo, ia64-opc.lo): New rules.
1748         * Makefile.in: Rebuild.
1749         * configure Rebuild.
1750         * configure.in (bfd_ia64_arch): New target.
1751         * disassemble.c (ARCH_ia64): Define.
1752         (disassembler): Support ARCH_ia64.
1753         * ia64-asmtab.c, ia64-asmtab.h, ia64-dis.c, ia64-gen.c ia64-ic.tbl,
1754         ia64-opc-a.c, ia64-opc-b.c, ia64-opc-d.c ia64-opc-f.c, ia64-opc-i.c,
1755         ia64-opc-m.c, ia64-opc-x.c, ia64-opc.c, ia64-opc.h, ia64-raw.tbl,
1756         ia64-war.tbl, ia64-waw.tbl: New files.
1757
1758 2000-04-20  Alexandre Oliva  <aoliva@redhat.com>
1759
1760         * m10300-dis.c (HAVE_AM30, HAVE_AM33): Define.
1761         (disassemble): Use them.
1762
1763 2000-04-14  Alan Modra  <alan@linuxcare.com.au>
1764
1765         * sysdep.h: Include "ansidecl.h" not <ansidecl.h>
1766         * Makefile.am: Update dependencies.
1767         * Makefile.in: Regenerate.
1768
1769 2000-04-14  Michael Sokolov  <msokolov@ivan.Harhan.ORG>
1770
1771         * a29k-dis.c, alpha-dis.c, alpha-opc.c, arc-dis.c, arc-opc.c,
1772         avr-dis.c, d10v-dis.c, d10v-opc.c, d30v-dis.c, d30v-opc.c,
1773         disassemble.c, h8300-dis.c, h8500-dis.c, hppa-dis.c, i370-dis.c,
1774         i370-opc.c, i960-dis.c, m10200-dis.c, m10200-opc.c, m10300-dis.c,
1775         m10300-opc.c, m68k-dis.c, m68k-opc.c, m88k-dis.c, mcore-dis.c,
1776         mips-dis.c, mips-opc.c, mips16-opc.c, pj-dis.c, pj-opc.c,
1777         ppc-dis.c, ppc-opc.c, sh-dis.c, sparc-dis.c, sparc-opc.c,
1778         tic80-dis.c, tic80-opc.c, v850-dis.c, v850-opc.c, vax-dis.c,
1779         w65-dis.c, z8k-dis.c, z8kgen.c: Include sysdep.h.  Remove
1780         ansidecl.h as sysdep.h includes it.
1781
1782 2000-04-7  Andrew Cagney  <cagney@b1.redhat.com>
1783
1784         * configure.in (WARN_CFLAGS): Set to -W -Wall by default.  Add
1785         --enable-build-warnings option.
1786         * Makefile.am (AM_CFLAGS, WARN_CFLAGS): Add definitions.
1787         * Makefile.in, configure: Re-generate.
1788
1789 2000-04-05  J"orn Rennecke <amylaar@redhat.com>
1790
1791         * sh-opc.h (sh_table): Use A_DISP_PC / PCRELIMM_8BY2 for ldre & ldrs.
1792         stc GBR,@-<REG_N> is available for arch_sh1_up.
1793         Group parallel processing insn with identical mnemonics together.
1794         Make three-operand psha / pshl come first.
1795
1796 2000-04-05  J"orn Rennecke <amylaar@redhat.co.uk>
1797
1798         * sh-opc.h (sh_nibble_type): Remove DISP_8 and DISP_4.
1799         Split IMM_[48]{,BY[24]} into IMM[01]_[48]{,BY[24]}.  Add REPEAT.
1800         (sh_arg_type): Add A_PC.
1801         (sh_table): Update entries using immediates.  Add repeat.
1802         * sh-dis.c (print_insn_shx): Remove DISP_8 and DISP_4.
1803         Split IMM_[48]{,BY[24]} into IMM[01]_[48]{,BY[24]}.  Add REPEAT.
1804
1805 2000-04-04  Alan Modra  <alan@linuxcare.com.au>
1806
1807         * po/opcodes.pot: Regenerate.
1808
1809         * Makefile.am (MKDEP): Use gcc -MM rather than mkdep.
1810         (DEP): Quote when passing vars to sub-make.  Add warning message
1811         to end.
1812         (DEP1): Rewrite for "gcc -MM".
1813         (CLEANFILES): Add DEP2.
1814         Update dependencies.
1815         * Makefile.in: Regenerate.
1816
1817 2000-04-03  Denis Chertykov  <denisc@overta.ru>
1818
1819         * avr-dis.c: Syntax cleanup.
1820         (add0fff): Print the pc relative address as a signed number.
1821         (add03f8): Likewise.
1822
1823 2000-04-01  Ian Lance Taylor  <ian@zembu.com>
1824
1825         * disassemble.c (disassembler_usage): Don't use a prototype.  Mark
1826         the parameter ATTRIBUTE_UNUSED.
1827         * ppc-opc.c: Add ATTRIBUTE_UNUSED as needed.
1828
1829 2000-04-01  Alexandre Oliva  <aoliva@redhat.com>
1830
1831         * m10300-opc.c: SP-based offsets are always unsigned.
1832
1833 2000-03-29  Thomas de Lellis  <tdel@windriver.com>
1834
1835         * arm-opc.h (thumb_opcodes): Disassemble 0xde.. to "bal"
1836         [branch always] instead of "undefined".
1837
1838 2000-03-27  Nick Clifton  <nickc@redhat.com>
1839
1840         * d30v-opc.c (d30v_format_table): Move SHORT_AR to end of list of
1841         short instructions, from end of list of long instructions.
1842
1843 2000-03-27  Ian Lance Taylor  <ian@zembu.com>
1844
1845         * Makefile.am (CFILES): Add avr-dis.c.
1846         (ALL_MACHINES): Add avr-dis.lo.
1847
1848 2000-03-27  Alan Modra  <alan@linuxcare.com>
1849
1850         * avr-dis.c (add0fff, add03f8): Don't use structure bitfields to
1851         truncate integers.
1852         (print_insn_avr): Call function via pointer in K&R compatible way.
1853         (dispLDD, regPP, reg50, reg104, reg40, reg20w, lit404, lit204,
1854         add0fff, add03f8): Convert to old style function declaration and
1855         add prototype.
1856         (avrdis_opcode): Add prototype.
1857
1858 2000-03-27  Denis Chertykov  <denisc@overta.ru>
1859
1860         * avr-dis.c: New file.  AVR disassembler.
1861         * configure.in (bfd_avr_arch): New architecture support.
1862         * disassemble.c: Likewise.
1863         * configure: Regenerate.
1864
1865 2000-03-06  J"oern Rennecke <amylaar@redhat.com>
1866
1867         * sh-opc.h (sh_table): ldre and ldrs have a *signed* displacement.
1868
1869 2000-03-02  J"orn Rennecke <amylaar@redhat.co.uk>
1870
1871         * d30v-dis.c (print_insn): Remove d*i hacks.  Use per-operand
1872         flag to determine if operand is pc-relative.
1873         * d30v-opc.c:
1874         (d30v_format_table):
1875         (REL6S3): Renamed from IMM6S3.
1876         Added flag OPERAND_PCREL.
1877         (REL12S3, REL18S3, REL32): Split from IMM12S3, IMM18S3, REL32, with
1878         added flag OPERAND_PCREL.
1879         (IMM12S3U): Replaced with REL12S3.
1880         (SHORT_D2, LONG_D): Delay target is pc-relative.
1881         (SHORT_B2r, SHORT_B3r, SHORT_B3br, SHORT_D2r, LONG_Ur, LONG_2r):
1882         Split from SHORT_B2, SHORT_D2, SHORT_B3b, SHORT_D2, LONG_U, LONG_2r,
1883         using the REL* operands.
1884         (LONG_2br, LONG_Dr): Likewise, from LONG_2b, LONG_D.
1885         (SHORT_D1r, SHORT_D2Br, LONG_Dbr): Renamed from SHORT_D1, SHORT_D2B,
1886         LONG_Db, using REL* operands.
1887         (SHORT_U, SHORT_A5S): Removed stray alternatives.
1888         (d30v_opcode_table): Use new *r formats.
1889
1890 2000-02-28  Nick Clifton  <nickc@redhat.com>
1891
1892         * m32r-desc.c (m32r_cgen_cpu_open): Replace 'flags' with
1893         'signed_overflow_ok_p'.
1894
1895 2000-02-27  Eli Zaretskii  <eliz@is.elta.co.il>
1896
1897         * Makefile.am (stamp-lib): Use $(LIBTOOL) --config to get the
1898         name of the libtool directory.
1899         * Makefile.in: Rebuild.
1900
1901 2000-02-24  Nick Clifton  <nickc@redhat.com>
1902
1903         * cgen-opc.c (cgen_set_signed_overflow_ok): New function.
1904         (cgen_clear_signed_overflow_ok): New function.
1905         (cgen_signed_overflow_ok_p): New function.
1906
1907 2000-02-23  Andrew Haley  <aph@redhat.com>
1908
1909         * m32r-asm.c, m32r-desc.c, m32r-desc.h, m32r-dis.c,
1910         m32r-ibld.c, m32r-opc.h: Rebuild.
1911
1912 2000-02-23  Linas Vepstas <linas@linas.org>
1913
1914         * i370-dis.c, i370-opc.c: New.
1915
1916         * disassemble.c (ARCH_i370): Define.
1917         (disassembler): Handle it.
1918
1919         * Makefile.am: Add support for Linux/IBM 370.
1920         * configure.in: Likewise.
1921
1922         * Makefile.in: Regenerate.
1923         * configure: Likewise.
1924
1925 2000-02-22  Chandra Chavva   <cchavva@redhat.com>
1926
1927         * d30v-opc.c (d30v_opcode_tab) : Added FLAG_NOT_WITH_ADDSUBppp to
1928         ST2H, STB, STH, STHH, STW and ST2H opcodes to prohibit parallel
1929         procedure.
1930
1931 2000-02-22  Andrew Haley  <aph@redhat.com>
1932
1933         * mips-dis.c (_print_insn_mips): New arg for OPCODE_IS_MEMBER:
1934         force gp32 to zero.
1935         * mips-opc.c (G6): New define.
1936         (mips_builtin_op): Add "move" definition for -gp32.
1937
1938 2000-02-22  Ian Lance Taylor  <ian@zembu.com>
1939
1940         From Grant Erickson <gerickso@Brocade.COM>:
1941         * ppc-opc.c: Correct dcread--it takes 3 arguments, not 2.
1942
1943 2000-02-21  Alan Modra  <alan@spri.levels.unisa.edu.au>
1944
1945         * dis-buf.c (buffer_read_memory): Change `length' param and all int
1946         vars to unsigned.
1947
1948 2000-02-17 J"orn Rennecke <amylaar@redhat.co.uk>
1949
1950         * sh-dis.c (print_movxy, print_insn_ddt, print_dsp_reg): New functions.
1951         (print_insn_ppi): Likewise.
1952         (print_insn_shx): Use info->mach to select appropriate insn set.
1953         Add support for sh-dsp.  Remove FD_REG_N support.
1954         * sh-opc.h (sh_nibble_type): Add new values for sh-dsp support.
1955         (sh_arg_type): Likewise.  Remove FD_REG_N.
1956         (sh_dsp_reg_nums): New enum.
1957         (arch_sh1, arch_sh2, arch_sh3, arch_sh3e, arch_sh4): New macros.
1958         (arch_sh_dsp, arch_sh3_dsp, arch_sh1_up, arch_sh2_up): Likewise.
1959         (arch_sh3_up, arch_sh3e_up, arch_sh4_up, arch_sh_dsp_up): Likewise.
1960         (arch_sh3_dsp_up): Likewise.
1961         (sh_opcode_info): New field: arch.
1962         (sh_table): Split up insn with FD_REG_N into ones with F_REG_N and
1963         D_REG_N.  Fill in arch field.  Add sh-dsp insns.
1964
1965 2000-02-14  Fernando Nasser  <fnasser@totem.to.redhat.com>
1966
1967         * arm-dis.c: Change flavor name from atpcs-special to
1968         special-atpcs to prevent name conflict in gdb.
1969         (get_arm_regname_num_options, set_arm_regname_option,
1970         get_arm_regnames): New functions.  API to access the several
1971         flavor of register names.  Note: Used by gdb.
1972         (print_insn_thumb): Use the register name entry from the currently
1973         selected flavor for LR and PC.
1974
1975 2000-02-10  Nick Clifton  <nickc@redhat.com>
1976
1977         * mcore-opc.h (enum mcore_opclass): Add MULSH and OPSR
1978         classes.
1979         (mcore_table): Add "idly4", "psrclr", "psrset", "mulsh" and
1980         "mulsh.h" instructions.
1981         * mcore-dis.c (imsk array): Add masks for MULSH and OPSR
1982         classes.
1983         (print_insn_mcore): Add support for little endian targets.
1984         Add support for MULSH and OPSR classes.
1985
1986 2000-02-07  Nick Clifton  <nickc@redhat.com>
1987
1988         * arm-dis.c (parse_arm_diassembler_option): Rename again.
1989         Previous delat did not take.
1990
1991 2000-02-03  Timothy Wall  <twall@redhat.com>
1992
1993         * dis-buf.c (buffer_read_memory):  Use octets_per_byte field
1994         to adjust target address bounds checking and calculate the
1995         appropriate octet offset into data.
1996
1997 2000-01-27  Nick Clifton  <nickc@redhat.com>
1998
1999         * arm-dis.c: (parse_disassembler_option): Rename to
2000         parse_arm_disassembler_option and allow to be exported.
2001
2002         * disassemble.c (disassembler_usage): New function: Print out any
2003         target specific disassembler options.
2004         Call arm_disassembler_options() if the ARM architecture is being
2005         supported.
2006
2007         * arm-dis.c (NUM_ELEM): Define this macro if not already
2008         defined.
2009         (arm_regname): New struct type for ARM register names.
2010         (arm_toggle_regnames): Delete.
2011         (parse_disassembler_option): Use register name structure.
2012         (print_insn): New function: Combines duplicate code found in
2013         print_insn_big_arm and print_insn_little_arm.
2014         (print_insn_big_arm): Call print_insn.
2015         (print_insn_little_arm): Call print_insn.
2016         (print_arm_disassembler_options): Display list of supported,
2017         ARM specific disassembler options.
2018
2019 2000-01-27  Thomas de Lellis  <tdel@windriver.com>
2020
2021         * arm-dis.c (printf_insn_big_arm): Treat ELF symbols with the
2022         ARM_STT_16BIT flag as Thumb code symbols.
2023
2024         * arm-dis.c (printf_insn_little_arm): Ditto.
2025
2026 2000-01-25  Thomas de Lellis  <tdel@windriver.com>
2027
2028         * arm-dis.c (printf_insn_thumb): Prevent double dumping
2029         of raw thumb instructions.
2030
2031 2000-01-20  Nick Clifton  <nickc@redhat.com>
2032
2033         * mcore-opc.h (mcore_table): Add "add" as an alias for "addu".
2034
2035 2000-01-03  Nick Clifton  <nickc@cygnus.com>
2036
2037         * arm-dis.c (streq): New macro.
2038         (strneq): New macro.
2039         (force_thumb): ew local variable.
2040         (parse_disassembler_option): New function: Parse a single, ARM
2041         specific disassembler command line switch.
2042         (parse_disassembler_option): Call parse_disassembler_option to
2043         parse individual command line switches.
2044         (print_insn_big_arm): Check force_thumb.
2045         (print_insn_little_arm): Check force_thumb.
2046
2047 For older changes see ChangeLog-9899
2048 \f
2049 Local Variables:
2050 mode: change-log
2051 left-margin: 8
2052 fill-column: 74
2053 version-control: never
2054 End: