1 2001-05-12 Alan Modra <amodra@one.net.au>
3 * i386-dis.c (prefix_user_table): Correct movq2dq, movdq2q, and
6 2001-05-07 Frank Ch. Eigler <fche@redhat.com>
8 * cgen-dis.in (default_print_insn): Tolerate min<base instructions
9 even at end of a section.
10 * cgen-ibld.in (extract_normal): Tolerate min!=base!=max instructions
11 by ignoring precariously-unpacked insn_value in favor of raw buffer.
13 2001-05-03 Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
15 * disassemble.c (disassembler_usage): Remove unused attribute.
17 2001-05-04 Frank Ch. Eigler <fche@redhat.com>
19 * m32r-dis.c, -asm.c, -ibld.c: Regenerated with disassembler fixes.
21 2001-05-04 Frank Ch. Eigler <fche@redhat.com>
23 * cgen-dis.in (print_insn): Remove call to read_insn. Instead,
24 assume incoming buffer already has the base insn loaded. Handle
25 smaller-than-base instructions for variable-length case.
27 2001-05-04 Alan Modra <amodra@one.net.au>
29 * i386-dis.c (Ev, Ed): Remove duplicate define.
32 (OP_XS): New function.
33 (dis386_twobyte_att): Correct pinsrw, pextrw, pmovmskb, and
35 (dis386_twobyte_intel): Likewise.
36 (prefix_user_table): Use MS for maskmovq operand.
38 2001-04-27 Johan Rydberg <jrydberg@opencores.org>
40 * Makefile.am: Add OpenRISC target.
41 * Makefile.in: Regenerated.
43 * disassemble.c (disassembler): Recognize the OpenRISC disassembly.
45 * configure.in (bfd_openrisc_arch): Add target.
46 * configure: Regenerated.
48 * openrisc-asm.c: New file.
49 * openrisc-desc.c: Likewise.
50 * openrisc-desc.h: Likewise.
51 * openrisc-dis.c: Likewise.
52 * openrisc-ibld.c: Likewise.
53 * openrisc-opc.c: Likewise.
54 * openrisc-opc.h: Likewise.
56 2001-04-24 Christian Groessler <cpg@aladdin.de>
58 * z8k-dis.c: add names of control registers (ctrl_names);
59 (seg_length): provides instruction length fixup for segmented
60 mode; (unpack_instr): correctly handle ARG_DISP16, ARG_DISP12,
61 CLASS_0DISP7, CLASS_1DISP7, CLASS_DISP8 and CLASS_PR cases;
62 (unparse_intr): handle CLASS_PR, print addresses without '#'
63 * z8k-opc.h: re-created with new z8kgen
64 * z8kgen.c: merged in fixes which were in existing z8k-opc.h; new
65 entries for ldctl/ldctlb instruction
67 2001-04-06 Andreas Jaeger <aj@suse.de>
69 * i386-dis.c: Add ffreep instruction.
71 2001-03-30 Alexandre Oliva <aoliva@redhat.com>
73 * ppc-opc.c (insert_mbe): Shift mask initializer as long.
75 2001-03-24 Alan Modra <alan@linuxcare.com.au>
77 * i386-dis.c (PREGRP25): Define.
78 (dis386_twobyte_att): Use here in place of "movntq" entry.
79 (dis386_twobyte_intel): Likewise.
80 (prefix_user_table): Add PREGRP25 entry for "movntq" and "movntdq".
82 (dis386_twobyte_att): Use here.
83 (dis386_twobyte_intel): Likewise.
84 (prefix_user_table): Add PREGRP26 entry for "punpcklqdq".
85 (prefix_user_table <maskmovdqu>): XM operand, not MX.
86 (prefix_user_table): Cosmetic changes to "bad" entries.
88 2001-03-23 Nick Clifton <nickc@redhat.com>
90 * mips-opc.c: Remove extraneous whitespace.
91 * mips-dis.c: Remove extraneous whitespace.
93 2001-03-22 Ben Elliston <bje@redhat.com>
95 * cgen-asm.in (@arch@_cgen_assemble_insn): Move tmp_errmsg
96 declaration inside CGEN_VERBOSE_ASSEMBLER_ERRORS conditional.
97 * cgen-ibld.in (put_insn_int_value): Mark cd parameter as unused
98 to allay a compiler warning.
100 2001-03-22 Alan Modra <alan@linuxcare.com.au>
102 * i386-dis.c (dis386_twobyte_att): Add entries for paddq, psubq.
103 (dis386_twobyte_intel): Likewise.
104 (twobyte_has_modrm): Set entry for paddq, psubq.
106 2001-03-20 Patrick Macdonald <patrickm@redhat.com>
108 * cgen-dis.in (print_insn_@arch@): Add support for target machine
109 determination via CGEN_COMPUTE_MACH.
110 * fr30-desc.c: Regenerate.
111 * fr30-dis.c: Regenerate.
112 * fr30-opc.h: Regenerate.
113 * m32r-desc.c: Regenerate.
114 * m32r-dis.c: Regenerate.
115 * m32r-opc.h: Regenerate.
116 * m32r-opinst.c: Regenerate.
118 2001-03-20 H.J. Lu <hjl@gnu.org>
120 * configure.in: Remove the redundent AC_ARG_PROGRAM.
121 * configure: Rebuild.
123 2001-03-19 Jim Wilson <wilson@redhat.com>
125 * ia64-gen.c (fetch_insn_class): If xsect, then ignore comment and
126 notestr if larger than xsect.
127 (in_class): Handle format M5.
128 * ia64-asmtab.c: Regnerate.
130 2001-03-19 John David Anglin <dave@hiauly1.hia.nrc.ca>
132 * vax-dis.c (print_insn_vax): Only fetch two bytes if the info buffer
133 has more than one byte left to read.
135 2001-03-16 Martin Schwidefsky <schwidefsky@de.ibm.com>
137 * s390-opc.c: Add new opcodes. Smooth out formatting.
138 * s390-opc.txt: Add new opcodes.
140 2001-03-06 Nick Clifton <nickc@redhat.com>
142 * arm-dis.c (print_insn_thumb): Compute destination address
143 of BLX(1) instruction by taking bit 1 from PC and not from bit
146 2001-03-06 Igor Shevlyakov <igor@windriver.com>
148 * m68k-dis.c (print_insn_m68k): Recognize Coldfire CPUs
149 so command line switches will work.
151 2001-03-05 Dave Brolley <brolley@redhat.com>
153 * fr30-asm.c: Regenerate.
154 * fr30-desc.c: Regenerate.
155 * fr30-desc.h: Regenerate.
156 * fr30-dis.c: Regenerate.
157 * fr30-ibld.c: Regenerate.
158 * fr30-opc.c: Regenerate.
159 * fr30-opc.h: Regenerate.
160 * m32r-asm.c: Regenerate.
161 * m32r-desc.c: Regenerate.
162 * m32r-desc.h: Regenerate.
163 * m32r-dis.c: Regenerate.
164 * m32r-ibld.c: Regenerate.
165 * m32r-opc.c: Regenerate.
166 * m32r-opc.h: Regenerate.
167 * m32r-opinst.c: Regenerate.
169 2001-02-28 Igor Shevlyakov <igor@windriver.com>
171 * m68k-opc.c: fix cpushl according to Motorola. Enable
172 bunch of instructions for Coldfire 5407 and add all new.
174 2001-02-27 Alan Modra <alan@linuxcare.com.au>
176 * configure.in (BFD_VERSION): Do without grep.
177 * configure: Regenerate.
178 * Makefile.am: Run "make dep-am".
179 * Makefile.in: Regenerate.
181 2001-02-23 David Mosberger <davidm@hpl.hp.com>
183 * ia64-opc-a.c: Add missing pseudo-ops for "cmp" and "cmp4".
184 * ia64-asmtab.c: Regenerate.
186 2001-02-21 David Mosberger <davidm@hpl.hp.com>
188 * ia64-opc-d.c (ia64_opcodes_d): Break the "add" pattern into two
189 separate variants: one for IMM22 and the other for IMM14.
190 * ia64-asmtab.c: Regenerate.
192 2001-02-21 Greg McGary <greg@mcgary.org>
194 * cgen-opc.c (cgen_get_insn_value): Add missing `return'.
196 2001-02-20 H.J. Lu <hjl@gnu.org>
198 * Makefile.am (ia64-ic.tbl): Remove the target.
199 (ia64-raw.tbl): Likewise.
200 (ia64-waw.tbl): Likewise.
201 (ia64-war.tbl): Likewise.
202 (ia64-asmtab.c): Generate it in the source directory.
203 * Makefile.in: Regenerated.
205 2001-02-18 lars brinkhoff <lars@nocrew.org>
207 * Makefile.am: Add PDP-11 target.
208 * configure.in: Likewise.
209 * disassemble.c: Likewise.
210 * pdp11-dis.c: New file.
211 * pdp11-opc.c: New file.
213 2001-02-14 Jim Wilson <wilson@redhat.com>
215 * ia64-ic.tbl: Update from Intel. Add setf to fr-writers.
216 * ia64-asmtab.c: Regenerate.
218 Mon Feb 12 17:41:26 CET 2001 Jan Hubicka <jh@suse.cz>
220 * i386-dis.c (prefix_user_t): Add 'Y' to SSE ineger converison
224 2001-02-11 Maciej W. Rozycki <macro@ds2.pg.gda.pl>
226 * mips-dis.c (print_insn_arg): Use top four bits of the address of
227 the following instruction not of the jump itself for the jump
229 (print_mips16_insn_arg): Likewise.
231 2001-02-11 Michael Sokolov <msokolov@ivan.Harhan.ORG>
233 * Makefile.am (stamp-lib): ranlib the libopcodes.a in the build
235 * Makefile.in: Regenerate.
237 2001-02-09 Schwidefsky <schwidefsky@de.ibm.com>
239 * Makefile.am: Add linux target for S/390.
240 * Makefile.in: Likewise.
241 * configure.in: Likewise.
242 * disassemble.c: Likewise.
243 * s390-dis.c: New file.
244 * s390-mkopc.c: New file.
245 * s390-opc.c: New file.
246 * s390-opc.txt: New file.
248 2001-02-05 Jim Wilson <wilson@redhat.com>
250 * ia64-asmtab.c: Revert 2000-12-16 change.
252 2001-02-02 Patrick Macdonald <patrickm@redhat.com>
254 * fr30-desc.h: Regenerate with CGEN_MAX_SYNTAX_ELEMENTS.
255 * m32r-desc.h: Regenerate.
257 Thu Feb 1 16:29:06 MET 2001 Jan Hubicka <jh@suse.cz>
259 * i386-dis.c (dis386_att, grps): Use 'T' for push/pop
260 (putop): Handle 'T', alphabetize order, fix 'I' handling in Intel syntax
262 2001-01-14 Alan Modra <alan@linuxcare.com.au>
264 * hppa-dis.c (print_insn_hppa): Handle '>' and '<' arg types.
266 2001-01-13 Nick Clifton <nickc@redhat.com>
268 * disassemble.c: Remove spurious white space.
270 Sat Jan 13 01:48:24 MET 2001 Jan Hubicka <jh@suse.cz>
272 * i386-dis.c (dis386_att, disx86_64_att): Fix ret, lret and iret
275 2001-01-11 Peter Targett <peter.targett@arccores.com>
277 * configure.in: Add arc-ext.lo for bfd_arc_arch selection.
278 * Makefile.am (C_FILES): Add arc-ext.c.
279 (ALL_MACHINES) Add arc-ext.lo.
280 (INCLUDES) Add opcode directory to list.
281 New dependency entry for arc-ext.lo.
282 * disassemble.c (disassembler): Correct call to
283 arc_get_disassembler.
284 * arc-opc.c: New update for ARC, including full base
285 instructions for ARC variants.
286 * arc-dis.h, arc-dis.c: New update for ARC, including
287 extensibility functionality.
288 * arc-ext.h, arc-ext.c: New files for handling extensibility.
290 2001-01-10 Jan Hubicka <jh@suse.cz>
292 * i386-dis.c (PREGRP15 - PREGRP24): New.
293 (dis386_twobyt): Add SSE2 instructions.
294 (twobyte_uses_SSE_prefix: Rename from ... ; add new SSE instructions.
295 (twobyte_uses_f3_prefix): ... this one.
296 (grps): Add SSE instructions.
297 (prefix_user_table): Add two new slots; add SSE2 instructions.
298 (print_insn_i386): Rename uses_f3_prefix to uses_SSE_prefix;
299 Handle the REPNZ and Data16 prefixes as well; do proper lookup
300 to prefix_user_table.
301 (OP_E): Accept mfence and lfence as well.
302 (OP_MMX): Data16 prefix turns MMX to SSE; support REX extensions.
303 (OP_XMM): Support REX extensions.
307 2001-01-09 Nick Clifton <nickc@redhat.com>
309 * arm-dis.c (print_insn): Set pc to zero for instructions with
310 a reloc associated with them.
312 2001-01-09 Jeff Johnston <jjohnstn@redhat.com>
314 * cgen-asm.in (parse_insn_normal): Changed syn to be
315 CGEN_SYNTAX_CHAR_TYPE. Changed all references to *syn
316 as character to use CGEN_SYNTAX_CHAR macro and all comparisons
317 to '\0' to use 0 instead.
318 * cgen-dis.in (print_insn_normal): Ditto.
319 * cgen-ibld.in (insert_insn_normal, extract_insn_normal): Ditto.
321 2001-01-05 Jan Hubicka <jh@suse.cz>
323 * i386-dis.c: Add x86_64 support.
324 (rex): New static variable.
325 (REX_MODE64, REX_EXTX, REX_EXTY, REX_EXTZ): New constants.
326 (USED_REX): New macro.
327 (Ev, Ed, Rm, Iq, Iv64, Cm, Dm, Rm*, Ob64, Ov64): New macros.
328 (OP_I64, OP_OFF64, OP_IMREG): New functions.
329 (OP_REG, OP_OFF): Declare.
330 (get64, get32, get32s): New functions.
331 (r??_reg): New constants.
332 (dis386_att): Change templates of instruction implicitly promoted
333 to 64bit; change e?? to RMe?? for unwind RM byte instructions.
335 (dis386_intel): Likewise.
336 (dixx86_64_att): New table based on dis386_att.
337 (dixx86_64_intel): New table based on dis386_intel.
338 (names64, names8rex): New global variable.
339 (names32, names16): Add extended registers.
340 (prefix_user_t): Recognize rex prefixes.
341 (prefix_name): Print REX prefixes nicely.
342 (op_riprel): New global variable.
343 (start_pc): Set type to bfd_vma.
344 (print_insn_i386): Detect the 64bit mode and use proper table;
345 move ckprefix after initializing the buffer; output unused rex prefixes;
346 output information about target of RIP relative addresses.
347 (putop): Support 'O' and 'I'. Update handling of "P', 'Q', 'R' and 'S';
348 (print_operand_value): New function.
349 (OP_E, OP_G, OP_REG, OP_I, OP_J, OP_DIR, OP_OFF, OP_D): Add support for
350 REX prefix and new modes.
351 (get64, get32s): New.
352 (get32): Return bfd_signed_vma type.
353 (set_op): Initialize the op_riprel.
354 * disassemble.c (disassembler): Recognize the x86-64 disassembly.
356 2001-01-03 Richard Sandiford <r.sandiford@redhat.com>
358 cgen-dis.in (read_insn): Use bfd_get_bits()
360 2001-01-02 Richard Sandiford <rsandifo@redhat.com>
362 * cgen-dis.c (hash_insn_array): Use bfd_put_bits().
363 (hash_insn_list): Likewise
364 * cgen-ibld.in (insert_1): Use bfd_put_bits() and bfd_get_bits().
365 (extract_1): Use bfd_get_bits().
366 (extract_normal): Apply sign extension to both extraction
368 * cgen-opc.c (cgen_get_insn_value): Use bfd_get_bits()
369 (cgen_put_insn_value): Use bfd_put_bits()
371 2000-12-28 Frank Ch. Eigler <fche@redhat.com>
373 * cgen-asm.in (parse_insn_normal): Print better error message for
374 instructions with missing operands.
376 2000-12-21 Santeri Paavolainen <santtu@ssh.com>
378 * cgen-opc.c: Include alloca.h if HAVE_ALLOCA_H is defined.
380 2000-12-16 Nick Clifton <nickc@redhat.com>
382 * Makefile.in: Regenerate.
383 * aclocal.m4: Regenerate.
384 * config.in: Regenerate.
385 * configure.in: Add spacing.
386 * configure: Regenerate.
387 * ia64-asmtab.c: Regenerate.
388 * po/opcodes.pot: Regenerate.
390 2000-12-12 Frank Ch. Eigler <fche@redhat.com>
392 * cgen-asm.in (@arch@_cgen_assemble_insn): Prefer printing insert-time
393 error messages over later parse-time ones.
395 2000-12-12 Jim Wilson <wilson@redhat.com>
397 * ia64-dis.c (print_insn_ia64): Cast away const on ia64_free_opcode
399 * ia64-gen.c (insert_deplist): Cast sizeof result to int.
400 (print_dependency_table): Print NULL if semantics field not set.
401 (insert_opcode_dependencies): Mark cmp parameter as unused.
402 (print_main_table): Use fprintf_vma to print long long fields.
403 (main): Mark argv paramter as unused. Convert to old style definition.
404 * ia64-opc.c (ia64_find_dependency): Cast sizeof result to int.
405 * ia64-asmtab.c: Regnerate.
407 2000-12-09 Nick Clifton <nickc@redhat.com>
409 * m32r-dis.c (print_insn): Prevent re-read of instruction from
412 * fr30-dis.c: Regenerate.
414 2000-12-08 Peter Targett <peter.targett@arccores.com>
416 * configure.in: Add arc-ext.lo for bfd_arc_arch selection.
417 * Makefile.am (C_FILES): Add arc-ext.c.
418 (ALL_MACHINES) Add arc-ext.lo.
419 (INCLUDES) Add opcode directory to list.
420 New dependency entry for arc-ext.lo.
421 * disassemble.c (disassembler): Correct call to
422 arc_get_disassembler.
423 * arc-opc.c: New update for ARC, including full base
424 instructions for ARC variants.
425 * arc-dis.h, arc-dis.c: New update for ARC, including
426 extensibility functionality.
427 * arc-ext.h, arc-ext.c: New files for handling extensibility.
429 2000-12-03 Chris Demetriou cgd@sibyte.com
431 * mips-opc.c (mips_builtin_opcodes): Use the WR_HILO, RD_HILO,
432 MOD_HILO, and MOD_LO macros.
434 * mips-opc.c (M1, M2): Delete.
435 (mips_builtin_opcodes): Remove all uses of M1.
437 * mips-opc.c (mips_builtin_opcodes): Make the dmfc2 and dmtc2
438 instructions take "G" format second operands and use the
440 There are mfc3 and mtc3 opcodes, so add dmfc3 and dmtc3 opcodes to
442 Delete "sel" code operands from mfc1 and mtc1.
443 Add MIPS64 opcode changes (dclo, dclz), and "sel" code variants
446 2000-12-03 Ed Satterthwaite ehs@sibyte.com and
447 Chris Demetriou cgd@sibyte.com
449 * mips-opc.c (mips_builtin_opcodes): Finish additions
450 for MIPS32 support, and clean up existing entries for
451 aesthetics, consistency with the MIPS32 ISA, and
452 with consistency the rest of the table.
454 2000-12-01 Nick Clifton <nickc@redhat.com>
456 * mips16-opc.c (mips16_opcodes): Add initialiser for membership
459 2000-12-01 Chris Demetriou <cgd@sibyte.com>
461 mips-dis.c (print_insn_arg): Handle new 'U' and 'J' argument
462 specifiers. Update 'B' for new constant names, and remove
464 mips-opc.c (mips_builtin_opcodes): Place "pref" and "ssnop"
465 near the top of the array, so they are disassembled properly.
466 Enable "ssnop" for MIPS32. Add "break" variant with 20 bit
467 code for MIPS32. Update "clo" and "clz" to use 'U' operand
468 specifier. Add 'H' format specifier variants for "mfc1,"
469 "mfc2," "mfc3," "mtc1," "mtc2," and "mtc3" for MIPS32. Update
470 MIPS32 "sdbbp" to use 'B' operand specifier. Add MIPS32
471 "wait" variant which uses 'J' operand specifier.
473 * mips-dis.c (set_mips_isa_type): Update to use
474 CPU_UNKNOWN and ISA_* constants. Add bfd_mach_mips32 case.
475 Replace bfd_mach_mips4K with bfd_mach_mips32_4k case.
476 * mips-opc.c (I32): New constant for instructions added in
479 (mips_builtin_opcodes) Replace all uses of P4 with I32.
481 * mips-dis.c (set_mips_isa_type): Add cases for
482 bfd_mach_mips5 and bfd_mach_mips64.
483 * mips-opc.c (I64): New definitions.
485 * mips-dis.c (set_mips_isa_type): Add case for
488 2000-11-28 Hans-Peter Nilsson <hp@bitrange.com>
490 * sh-dis.c (print_insn_ddt): Make insn_x, insn_y unsigned.
491 (print_insn_ppi): Make nib1, nib2, nib3 unsigned.
492 Initialize variable dc to NULL.
493 (print_insn_shx): Remove unused label d_reg_n.
495 2000-11-24 Nick Clifton <nickc@redhat.com>
497 * arm-opc.h: Add new opcode formatting parameter 'B'.
498 (arm_opcodes): Add XScale, v5, and v5te instructions.
499 (thumb_opcodes): Add v5t instructions.
501 * arm-dis.c (print_insn_arm): Handle new 'B' format
503 (print_insn_thumb): Decode BLX(1) instruction.
505 2000-11-21 Chris Demetriou <cgd@sibyte.com>
507 * mips-opc.c: Fix file header comment.
509 2000-11-14 Hans-Peter Nilsson <hp@axis.com>
511 * cris-dis.c (cris_get_disassembler): If abfd is NULL, return
512 print_insn_cris_with_register_prefix.
514 2000-11-11 Alexandre Oliva <aoliva@redhat.com>
516 * sh-opc.h: The operand of `mov.w r0, (<disp>,GBR)' is IMM1, not 0.
518 2000-11-07 Matthew Green <mrg@redhat.com>
520 * cgen-dis.in (print_insn): All insns which can fit into insn_value
521 must be loaded there in their entirety.
523 2000-10-20 Jakub Jelinek <jakub@redhat.com>
525 * sparc-dis.c (v9a_asr_reg_names): Add v9b ASRs.
526 (compute_arch_mask): Add v8plusb and v9b machines.
527 (print_insn_sparc): siam mode decoding, accept ASRs up to 25.
528 * sparc-opc.c: Support for Cheetah instruction set.
529 (prefetch_table): Add #invalidate.
531 2000-10-16 Nick Clifton <nickc@redhat.com>
533 * mcore-dis.c (imsk): Change mask for OC to 0xFE00.
535 2000-10-06 Dave Brolley <brolley@redhat.com>
537 * fr30-desc.h: Regenerate.
538 * m32r-desc.h: Regenerate.
539 * m32r-ibld.c: Regenerate.
541 2000-10-05 Jim Wilson <wilson@redhat.com>
543 * ia64-ic.tbl: Update from Intel.
544 * ia64-asmtab.c: Regenerate.
546 2000-10-04 Kazu Hirata <kazu@hxi.com>
548 * ia64-gen.c: Convert C++-style comments to C-style comments.
549 * tic54x-dis.c: Likewise.
551 2000-09-29 Hans-Peter Nilsson <hp@axis.com>
553 Changes to add dollar prefix to registers for files where user symbols
554 don't have a leading underscore. Fix formatting.
555 * cris-dis.c (REGISTER_PREFIX_CHAR): New.
556 (format_reg): Add parameter with_reg_prefix. All callers changed.
557 (print_with_operands): Ditto.
558 (print_insn_cris_generic): Renamed from print_insn_cris, add
559 parameter with_reg_prefix.
560 (print_insn_cris_with_register_prefix,
561 print_insn_cris_without_register_prefix, cris_get_disassembler):
563 * disassemble.c (disassembler) [ARCH_cris]: Call cris_get_disassembler.
565 2000-09-22 Jim Wilson <wilson@redhat.com>
567 * ia64-opc-f.c (ia64_opcodes_f): Add fpcmp pseudo-ops for
568 gt, ge, ngt, and nge.
569 * ia64-asmtab.c: Regenerate.
571 * ia64-dis.c (print_insn_ia64): Revert Aug 7 byte skip count change.
572 * ia64-gen.c (parse_semantics): Handle IA64_DVS_STOP.
573 (lookup_specifier): Handle "PR%, 1 to 15" and "PR%, 16 to 62".
574 * ia64-ic.tbl, ia64-raw.tbl, ia64-war.tbl, ia64-waw.tbl: Update.
575 * ia64-asmtab.c: Regnerate.
577 2000-09-13 Anders Norlander <anorland@acc.umu.se>
579 * mips-opc.c (mips_builtin_opcodes): Support cache instruction on 4K cores.
580 Add mfc0 and mtc0 with sub-selection values.
581 Add clo and clz opcodes.
582 Add msub and msubu instructions for MIPS32.
583 Add madd/maddu aliases for mad/madu for MIPS32.
584 Support wait, deret, eret, movn, pref for MIPS32.
585 Support tlbp, tlbr, tlbwi, tlbwr.
588 * mips-dis.c (print_insn_arg): Print sdbbp 'm' args.
589 (print_insn_arg): Handle 'H' args.
590 (set_mips_isa_type): Recognize 4K.
591 Use CPU_* defines instead of hardcoded numbers.
593 2000-09-11 Catherine Moore <clm@redhat.com>
595 * d30v-opc.c (d30v_operand_t): New operand type Rb2.
596 (d30v_format_tab): Use Rb2 for modinc and moddec.
598 2000-09-07 Catherine Moore <clm@redhat.com>
600 * d30v-opc.c (d30v_format_tab): Use format Ra for
603 2000-09-06 Alexandre Oliva <aoliva@redhat.com>
605 * configure: Rebuilt with new libtool.m4.
607 2000-09-05 Nick Clifton <nickc@redhat.com>
609 * configure: Regenerate.
610 * po/opcodes.pot: Regenerate.
612 2000-08-31 Alexandre Oliva <aoliva@redhat.com>
614 * acinclude.m4: Include libtool and gettext macros from the
616 * aclocal.m4, configure: Rebuilt.
618 2000-08-30 Kazu Hirata <kazu@hxi.com>
620 * tic80-dis.c: Fix formatting.
622 2000-08-29 Kazu Hirata <kazu@hxi.com>
624 * w65-dis.c: Fix formatting.
626 2000-08-28 Mark Hatle <mhatle@mvista.com>
628 * ppc-opc.c: Add XTLB macro for a few PPC 4xx extended mnemonics.
629 (powerpc_opcodes): Add table entries for PPC 405 instructions.
630 Changed rfci, icbt, mfdcr, dccci, mtdcr, iccci from PPC to PPC403
631 instructions. Added extended mnemonic mftbl as defined in the
632 405GP manual for all PPCs.
634 2000-08-28 Jim Wilson <wilson@redhat.com>
636 * ia64-dis.c (print_insn_ia64): Add failed label after ia64_free_opcode
637 call. Change last goto to use failed instead of done.
639 2000-08-28 Dave Brolley <brolley@redhat.com>
641 * cgen-ibld.in (cgen_put_insn_int_value): New function.
642 (insert_normal): Allow for non-zero word_offset with CGEN_INT_INSN_P.
643 (insert_insn_normal): Use cgen_put_insn_int_value with CGEN_INT_INSN_P.
644 (extract_normal): Allow for non-zero word_offset with CGEN_INT_INSN_P.
645 * cgen-dis.in (read_insn): New static function.
646 (print_insn): Use read_insn to read the insn into the buffer and set
648 (print_insn): in CGEN_INT_INSN_P, make sure that the entire insn is
650 * fr30-asm.c: Regenerated.
651 * fr30-desc.c: Regenerated.
652 * fr30-desc.h: Regenerated.
653 * fr30-dis.c: Regenerated.
654 * fr30-ibld.c: Regenerated.
655 * fr30-opc.c: Regenerated.
656 * fr30-opc.h: Regenerated.
657 * m32r-asm.c: Regenerated.
658 * m32r-desc.c: Regenerated.
659 * m32r-desc.h: Regenerated.
660 * m32r-dis.c: Regenerated.
661 * m32r-ibld.c: Regenerated.
662 * m32r-opc.c: Regenerated.
664 2000-08-28 Kazu Hirata <kazu@hxi.com>
666 * tic30-dis.c: Fix formatting.
668 2000-08-27 Kazu Hirata <kazu@hxi.com>
670 * sh-dis.c: Fix formatting.
672 2000-08-24 David Edelsohn <dje@watson.ibm.com>
674 * ppc-opc.c (powerpc_opcodes): Add rfid, mtsrd, mtsrdin, mtmsrd.
676 2000-08-24 Kazu Hirata <kazu@hxi.com>
678 * z8k-dis.c: Fix formatting.
680 2000-08-16 Jim Wilson <wilson@redhat.com>
682 * ia64-ic.tbl (pr-readers-nobr-nomovpr): Add addl, adds. Delete
683 break, mov-immediate, nop.
684 * ia64-opc-f.c: Delete fpsub instructions.
685 * ia64-opc-m.c: Add POSTINC to all instructions with postincrement
686 address operand. Rewrite using macros to avoid long lines.
687 * ia64-opc.h (POSTINC): Define.
688 * ia64-asmtab.c: Regenerate.
690 2000-08-15 Jim Wilson <wilson@redhat.com>
692 * ia64-ic.tbl: Add missing entries.
694 2000-08-08 Jason Eckhardt <jle@redhat.com>
696 * i860-dis.c (print_br_address): Change third argument from int
699 2000-08-07 Richard Henderson <rth@redhat.com>
701 * ia64-dis.c (print_insn_ia64): Get byte skip count correct
702 for MLI templates. Handle IA64_OPND_TGT64.
704 2000-08-04 Ben Elliston <bje@redhat.com>
706 * cgen-dis.in, cgen-asm.in, cgen-ibld.in: New files.
709 2000-08-02 Jim Wilson <wilson@redhat.com>
711 * ia64-dis.c (print_insn_ia64): Call ia64_free_opcode at end.
713 2000-07-29 Marek Michalkiewicz <marekm@linux.org.pl>
715 * avr-dis.c (avr_operand): Use PARAMS macro in declaration.
716 Change return type from void to int. Check the combination
717 of operands, return 1 if valid. Fix to avoid BUF overflow.
718 Report undefined combinations of operands in COMMENT.
719 Report internal errors to stderr. Output the adiw/sbiw
720 constant operand in both decimal and hex.
721 (print_insn_avr): Disassemble ldd/std with displacement of 0
722 as ld/st. Check avr_operand () return value, handle invalid
723 combinations of operands like unknown opcodes.
725 2000-07-28 Ben Elliston <bje@redhat.com>
727 * Makefile.am (CGEN, CGENDEPS, CGENDIR, CGENFLAGS): New.
728 (run-cgen, stamp-m32r, stamp-fr30): New targets.
729 * Makefile.in: Regenerate.
730 * configure.in: Add --enable-cgen-maint option.
731 * configure: Regenerate.
733 2000-07-26 Dave Brolley <brolley@redhat.com>
735 * cgen-opc.c (cgen_hw_lookup_by_name): 'i' is now unsigned.
736 (cgen_hw_lookup_by_num): Ditto.
737 (cgen_operand_lookup_by_name): Ditto.
738 (print_address): Ditto.
739 (print_keyword): Ditto.
740 * cgen-dis.c (hash_insn_array): Mark unused parameters with
742 * cgen-asm.c (hash_insn_array): Mark unused parameters with
744 (cgen_parse_keyword): Ditto.
746 2000-07-22 Jason Eckhardt <jle@redhat.com>
748 * i860-dis.c: New file.
749 (print_insn_i860): New function.
750 (print_br_address): New function.
751 (sign_extend): New function.
752 (BITWISE_OP): New macro.
753 (I860_REG_PREFIX): New macro.
754 (grnames, frnames, crnames): New structures.
756 * disassemble.c (ARCH_i860): Define.
757 (disassembler): Add check for bfd_arch_i860 to set disassemble
758 function to print_insn_i860.
760 * Makefile.in (CFILES): Added i860-dis.c.
761 (ALL_MACHINES): Added i860-dis.lo.
762 (i860-dis.lo): New dependences.
764 * configure.in: New bits for bfd_i860_arch.
766 * configure: Regenerated.
768 2000-07-20 Hans-Peter Nilsson <hp@axis.com>
770 * Makefile.am (CFILES): Add cris-dis.c and cris-opc.c.
771 (ALL_MACHINES): Add cris-dis.lo and cris-opc.lo.
772 (cris-dis.lo, cris-opc.lo): New rules.
773 * Makefile.in: Rebuild.
774 * configure.in (bfd_cris_arch): New target.
775 * configure: Rebuild.
776 * disassemble.c (ARCH_cris): Define.
777 (disassembler): Support ARCH_cris.
778 * cris-dis.c, cris-opc.c: New files.
779 * po/POTFILES.in, po/opcodes.pot: Regenerate.
781 2000-07-11 Jakub Jelinek <jakub@redhat.com>
783 * sparc-opc.c (sparc_opcodes): popc has 0 in rs1, not rs2.
784 Reported by Bill Clarke <llib@computer.org>.
786 2000-07-09 Geoffrey Keating <geoffk@redhat.com>
788 * ppc-opc.c (powerpc_opcodes): Correct suffix for vslw.
789 Patch by Randall J Fisher <rfisher@ecn.purdue.edu>.
791 2000-07-09 Alan Modra <alan@linuxcare.com.au>
793 * hppa-dis.c (fput_reg, fput_fp_reg, fput_fp_reg_r, fput_creg,
794 fput_const, extract_3, extract_5_load, extract_5_store,
795 extract_5r_store, extract_5R_store, extract_10U_store,
796 extract_5Q_store, extract_11, extract_14, extract_16, extract_21,
797 extract_12, extract_17, extract_22): Prototype.
798 (print_insn_hppa): Rename inner block opcode -> opc to avoid
799 shadowing outer block.
802 2000-07-05 DJ Delorie <dj@redhat.com>
806 2000-07-04 Alexandre Oliva <aoliva@redhat.com>
808 * arm-dis.c (print_insn_arm): Output combinations of PSR flags.
810 2000-07-03 Marek Michalkiewicz <marekm@linux.org.pl>
812 * avr-dis.c (avr_operand): Change _ () to _() around all strings
813 marked for translation (exception from the usual coding style).
814 (print_insn_avr): Initialize insn2 to avoid warnings.
816 2000-07-03 Kazu Hirata <kazu@hxi.com>
818 * h8300-dis.c (bfd_h8_disassemble): Improve readability.
819 * h8500-dis.c: Fix formatting.
821 2000-07-01 Alan Modra <alan@linuxcare.com.au>
823 * Makefile.am (DEP): Fix 2000-06-22. grep after running dep.sed
824 (CLEANFILES): Add DEPA.
825 * Makefile.in: Regenerate.
827 2000-06-26 Scott Bambrough <scottb@netwinder.org>
829 * arm-dis.c (regnames): Add an additional register set to match
830 the set used by GCC. Make it the default.
832 2000-06-22 Alan Modra <alan@linuxcare.com.au>
834 * Makefile.am (DEP): grep for leading `/' in DEP1, and fail if we
836 * Makefile.in: Regenerate.
838 2000-06-20 H.J. Lu <hjl@gnu.org>
840 * Makefile.am: Rebuild dependency.
841 * Makefile.in: Rebuild.
843 2000-06-18 Stephane Carrez <stcarrez@worldnet.fr>
845 * Makefile.in, configure: regenerate
846 * disassemble.c (disassembler): Recognize ARCH_m68hc12,
848 * m68hc11-dis.c (read_memory, print_insn, print_insn_m68hc12):
850 * configure.in: Recognize m68hc12 and m68hc11.
851 * m68hc11-dis.c, m68hc11-opc.c: New files for support of m68hc1x
852 * Makefile.am (CFILES, ALL_MACHINES): New files for disassembly
853 and opcode generation for m68hc11 and m68hc12.
855 2000-06-16 Nick Duffek <nsd@redhat.com>
857 * disassemble.c (disassembler): Refer to the PowerPC 620 using
858 bfd_mach_ppc_620 instead of 620.
860 2000-06-12 Kazu Hirata <kazu@hxi.com>
862 * h8300-dis.c: Fix formatting.
863 (bfd_h8_disassemble): Distinguish adds/subs, inc/dec.[wl]
866 2000-06-09 Denis Chertykov <denisc@overta.ru>
868 * avr-dis.c (avr_operand): Bugfix for jmp/call address.
870 2000-06-07 Denis Chertykov <denisc@overta.ru>
872 * avr-dis.c: completely rewritten.
874 2000-06-02 Kazu Hirata <kazu@hxi.com>
876 * h8300-dis.c: Follow the GNU coding style.
877 (bfd_h8_disassemble) Fix a typo.
879 2000-06-01 Kazu Hirata <kazu@hxi.com>
881 * h8300-dis.c (bfd_h8_disassemble_init): Fix a typo.
882 (bfd_h8_disassemble): Distinguish the operand size of inc/dev.[wl]
883 correctly. Fix a typo.
885 2000-05-31 Nick Clifton <nickc@redhat.com>
887 * opintl.h (_(String)): Explain why dgettext is used instead of
890 2000-05-30 Nick Clifton <nickc@redhat.com>
892 * opintl.h (gettext, dgettext, dcgettext, textdomain,
893 bindtextdomain): Replace defines with those from intl/libgettext.h
894 to quieten gcc warnings.
896 2000-05-26 Alan Modra <alan@linuxcare.com.au>
898 * Makefile.am: Update dependencies with "make dep-am"
899 * Makefile.in: Regenerate.
901 2000-05-25 Alexandre Oliva <aoliva@redhat.com>
903 * m10300-dis.c (disassemble): Don't assume 32-bit longs when
904 sign-extending operands.
906 2000-05-15 Donald Lindsay <dlindsay@redhat.com>
908 * d10v-opc.c (d10v_opcodes): add ALONE tag to all short branches
911 2000-05-21 Nick Clifton <nickc@redhat.com>
913 * Makefile.am (LIBIBERTY): Define.
915 2000-05-19 Diego Novillo <dnovillo@redhat.com>
917 * mips-dis.c (REGISTER_NAMES): Rename to STD_REGISTER_NAMES.
918 (STD_REGISTER_NAMES): New name for REGISTER_NAMES.
919 (reg_names): Rename to std_reg_names. Change it to a char **
921 (std_reg_names): New name for reg_names.
922 (set_mips_isa_type): Set reg_names to point to std_reg_names by
925 2000-05-16 Frank Ch. Eigler <fche@redhat.com>
927 * fr30-desc.h: Partially regenerated to account for changed
928 CGEN_MAX_* -> CGEN_ACTUAL_MAX_* macros.
929 * m32r-desc.h: Ditto.
931 2000-05-15 Nick Clifton <nickc@redhat.com>
933 * arm-opc.h: Use upper case for flasg in MSR and MRS
934 instructions. Allow any bit to be set in the field_mask of
937 * arm-dis.c (print_insn_arm): Decode _x and _s bits of the
938 field_mask of an MSR instruction.
940 2000-05-11 Thomas de Lellis <tdel@windriver.com>
942 * arm-opc.h: Disassembly of thumb ldsb/ldsh
943 instructions changed to ldrsb/ldrsh.
945 2000-05-11 Ulf Carlsson <ulfc@engr.sgi.com>
947 * mips-dis.c (print_insn_arg): Don't mask top 32 bits of 64-bit
948 target addresses for 'jal' and 'j'.
950 2000-05-10 Geoff Keating <geoffk@redhat.com>
952 * ppc-opc.c (powerpc_opcodes): Make the predicted-branch opcodes
953 also available in common mode when powerpc syntax is being used.
955 2000-05-08 Alan Modra <alan@linuxcare.com.au>
957 * m68k-dis.c (dummy_printer): Add ATTRIBUTE_UNUSED to args.
958 (dummy_print_address): Ditto.
960 2000-05-04 Timothy Wall <twall@redhat.com>
964 * disassemble.c (disassembler): Add ARCH_tic54x.
965 * configure.in: Added tic54x target.
967 * Makefile.am: Add tic54x dependencies.
968 * Makefile.in: Ditto.
970 2000-05-03 J.T. Conklin <jtc@redback.com>
972 * ppc-opc.c (VA, VB, VC, VD, VS, SIMM, UIMM, SHB): New macros, for
973 vector unit operands.
974 (VX, VX_MASK, VXA, VXA_MASK, VXR, VXR_MASK): New macros, for vector
975 unit instruction formats.
976 (PPCVEC): New macro, mask for vector instructions.
977 (powerpc_operands): Add table entries for above operand types.
978 (powerpc_opcodes): Add table entries for vector instructions.
980 * ppc-dis.c (print_insn_big_powerpc): Add PPC_OPCODE_ALTIVEC to mask.
981 (print_insn_little_powerpc): Likewise.
982 (print_insn_powerpc): Prepend 'v' when printing vector registers.
984 2000-04-24 Clinton Popetz <cpopetz@redhat.com>
986 * configure.in: Add bfd_powerpc_64_arch.
987 * disassemble.c (disassembler): Use print_insn_big_powerpc for
990 2000-04-24 Nick Clifton <nickc@redhat.com>
992 * fr30-desc.c (fr30_cgen_cpu_open): Initialise signed_overflow
995 2000-04-23 Denis Chertykov <denisc@overta.ru>
997 * avr-dis.c (reg_fmul_d): New. Extract destination register from
999 (reg_fmul_r): New. Extract source register from FMUL instruction.
1000 (reg_muls_d): New. Extract destination register from MULS instruction.
1001 (reg_muls_r): New. Extract source register from MULS instruction.
1002 (reg_movw_d): New. Extract destination register from MOVW instruction.
1003 (reg_movw_r): New. Extract source register from MOVW instruction.
1004 (print_insn_avr): Handle MOVW, MULS, MULSU, FMUL, FMULS, FMULSU,
1005 EICALL, EIJMP, LPM r,Z, ELPM r,Z, SPM, ESPM instructions.
1007 2000-04-22 Timothy Wall <twall@redhat.com>
1009 * ia64-gen.c (general): Add an ordered table of primary
1010 opcode names, as well as priority fields to disassembly data
1011 structures to enforce a preferred disassembly format based on the
1012 ordering of the opcode tables.
1013 (load_insn_classes): Show a useful message if IC tables are missing.
1014 (load_depfile): Ditto.
1015 * ia64-asmtab.h (struct ia64_dis_names ): Add priority flag to
1016 distinguish preferred disassembly.
1017 * ia64-opc-f.c: Reorder some insn for preferred disassembly
1018 format. Fix incorrect flag on fma.s/fma.s.s0.
1019 * ia64-opc.c: Scan *all* disassembly matches and use the one with
1020 the highest priority.
1021 * ia64-opc-b.c: Use more abbreviations.
1022 * ia64-asmtab.c: Regenerate.
1024 2000-04-21 Jason Eckhardt <jle@redhat.com>
1026 * hppa-dis.c (extract_16): New function.
1027 (print_insn_hppa): Fix incorrect handling of 'fe'. Added handling of
1028 new operand types l,y,&,fe,fE,fx.
1030 2000-04-21 Richard Henderson <rth@redhat.com>
1031 David Mosberger <davidm@hpl.hp.com>
1032 Timothy Wall <twall@redhat.com>
1033 Bob Manson <manson@charmed.cygnus.com>
1034 Jim Wilson <wilson@redhat.com>
1036 * Makefile.am (HFILES): Add ia64-asmtab.h, ia64-opc.h.
1037 (CFILES): Add ia64-dis.c, ia64-opc-a.c, ia64-opc-b.c, ia64-opc-f.c,
1038 ia64-opc-i.c, ia64-opc-m.c, ia64-opc-d.c, ia64-opc.c, ia64-gen.c,
1040 (ALL_MACHINES): Add ia64-dis.lo, ia64-opc.lo.
1041 (ia64-ic.tbl, ia64-raw.tbl, ia64-waw.tbl, ia64-war.tbl, ia64-gen,
1042 ia64-gen.o, ia64-asmtab.c, ia64-dis.lo, ia64-opc.lo): New rules.
1043 * Makefile.in: Rebuild.
1044 * configure Rebuild.
1045 * configure.in (bfd_ia64_arch): New target.
1046 * disassemble.c (ARCH_ia64): Define.
1047 (disassembler): Support ARCH_ia64.
1048 * ia64-asmtab.c, ia64-asmtab.h, ia64-dis.c, ia64-gen.c ia64-ic.tbl,
1049 ia64-opc-a.c, ia64-opc-b.c, ia64-opc-d.c ia64-opc-f.c, ia64-opc-i.c,
1050 ia64-opc-m.c, ia64-opc-x.c, ia64-opc.c, ia64-opc.h, ia64-raw.tbl,
1051 ia64-war.tbl, ia64-waw.tbl: New files.
1053 2000-04-20 Alexandre Oliva <aoliva@redhat.com>
1055 * m10300-dis.c (HAVE_AM30, HAVE_AM33): Define.
1056 (disassemble): Use them.
1058 2000-04-14 Alan Modra <alan@linuxcare.com.au>
1060 * sysdep.h: Include "ansidecl.h" not <ansidecl.h>
1061 * Makefile.am: Update dependencies.
1062 * Makefile.in: Regenerate.
1064 2000-04-14 Michael Sokolov <msokolov@ivan.Harhan.ORG>
1066 * a29k-dis.c, alpha-dis.c, alpha-opc.c, arc-dis.c, arc-opc.c,
1067 avr-dis.c, d10v-dis.c, d10v-opc.c, d30v-dis.c, d30v-opc.c,
1068 disassemble.c, h8300-dis.c, h8500-dis.c, hppa-dis.c, i370-dis.c,
1069 i370-opc.c, i960-dis.c, m10200-dis.c, m10200-opc.c, m10300-dis.c,
1070 m10300-opc.c, m68k-dis.c, m68k-opc.c, m88k-dis.c, mcore-dis.c,
1071 mips-dis.c, mips-opc.c, mips16-opc.c, pj-dis.c, pj-opc.c,
1072 ppc-dis.c, ppc-opc.c, sh-dis.c, sparc-dis.c, sparc-opc.c,
1073 tic80-dis.c, tic80-opc.c, v850-dis.c, v850-opc.c, vax-dis.c,
1074 w65-dis.c, z8k-dis.c, z8kgen.c: Include sysdep.h. Remove
1075 ansidecl.h as sysdep.h includes it.
1077 2000-04-7 Andrew Cagney <cagney@b1.redhat.com>
1079 * configure.in (WARN_CFLAGS): Set to -W -Wall by default. Add
1080 --enable-build-warnings option.
1081 * Makefile.am (AM_CFLAGS, WARN_CFLAGS): Add definitions.
1082 * Makefile.in, configure: Re-generate.
1084 2000-04-05 J"orn Rennecke <amylaar@redhat.com>
1086 * sh-opc.h (sh_table): Use A_DISP_PC / PCRELIMM_8BY2 for ldre & ldrs.
1087 stc GBR,@-<REG_N> is available for arch_sh1_up.
1088 Group parallel processing insn with identical mnemonics together.
1089 Make three-operand psha / pshl come first.
1091 2000-04-05 J"orn Rennecke <amylaar@redhat.co.uk>
1093 * sh-opc.h (sh_nibble_type): Remove DISP_8 and DISP_4.
1094 Split IMM_[48]{,BY[24]} into IMM[01]_[48]{,BY[24]}. Add REPEAT.
1095 (sh_arg_type): Add A_PC.
1096 (sh_table): Update entries using immediates. Add repeat.
1097 * sh-dis.c (print_insn_shx): Remove DISP_8 and DISP_4.
1098 Split IMM_[48]{,BY[24]} into IMM[01]_[48]{,BY[24]}. Add REPEAT.
1100 2000-04-04 Alan Modra <alan@linuxcare.com.au>
1102 * po/opcodes.pot: Regenerate.
1104 * Makefile.am (MKDEP): Use gcc -MM rather than mkdep.
1105 (DEP): Quote when passing vars to sub-make. Add warning message
1107 (DEP1): Rewrite for "gcc -MM".
1108 (CLEANFILES): Add DEP2.
1109 Update dependencies.
1110 * Makefile.in: Regenerate.
1112 2000-04-03 Denis Chertykov <denisc@overta.ru>
1114 * avr-dis.c: Syntax cleanup.
1115 (add0fff): Print the pc relative address as a signed number.
1116 (add03f8): Likewise.
1118 2000-04-01 Ian Lance Taylor <ian@zembu.com>
1120 * disassemble.c (disassembler_usage): Don't use a prototype. Mark
1121 the parameter ATTRIBUTE_UNUSED.
1122 * ppc-opc.c: Add ATTRIBUTE_UNUSED as needed.
1124 2000-04-01 Alexandre Oliva <aoliva@redhat.com>
1126 * m10300-opc.c: SP-based offsets are always unsigned.
1128 2000-03-29 Thomas de Lellis <tdel@windriver.com>
1130 * arm-opc.h (thumb_opcodes): Disassemble 0xde.. to "bal"
1131 [branch always] instead of "undefined".
1133 2000-03-27 Nick Clifton <nickc@redhat.com>
1135 * d30v-opc.c (d30v_format_table): Move SHORT_AR to end of list of
1136 short instructions, from end of list of long instructions.
1138 2000-03-27 Ian Lance Taylor <ian@zembu.com>
1140 * Makefile.am (CFILES): Add avr-dis.c.
1141 (ALL_MACHINES): Add avr-dis.lo.
1143 2000-03-27 Alan Modra <alan@linuxcare.com>
1145 * avr-dis.c (add0fff, add03f8): Don't use structure bitfields to
1147 (print_insn_avr): Call function via pointer in K&R compatible way.
1148 (dispLDD, regPP, reg50, reg104, reg40, reg20w, lit404, lit204,
1149 add0fff, add03f8): Convert to old style function declaration and
1151 (avrdis_opcode): Add prototype.
1153 2000-03-27 Denis Chertykov <denisc@overta.ru>
1155 * avr-dis.c: New file. AVR disassembler.
1156 * configure.in (bfd_avr_arch): New architecture support.
1157 * disassemble.c: Likewise.
1158 * configure: Regenerate.
1160 2000-03-06 J"oern Rennecke <amylaar@redhat.com>
1162 * sh-opc.h (sh_table): ldre and ldrs have a *signed* displacement.
1164 2000-03-02 J"orn Rennecke <amylaar@redhat.co.uk>
1166 * d30v-dis.c (print_insn): Remove d*i hacks. Use per-operand
1167 flag to determine if operand is pc-relative.
1169 (d30v_format_table):
1170 (REL6S3): Renamed from IMM6S3.
1171 Added flag OPERAND_PCREL.
1172 (REL12S3, REL18S3, REL32): Split from IMM12S3, IMM18S3, REL32, with
1173 added flag OPERAND_PCREL.
1174 (IMM12S3U): Replaced with REL12S3.
1175 (SHORT_D2, LONG_D): Delay target is pc-relative.
1176 (SHORT_B2r, SHORT_B3r, SHORT_B3br, SHORT_D2r, LONG_Ur, LONG_2r):
1177 Split from SHORT_B2, SHORT_D2, SHORT_B3b, SHORT_D2, LONG_U, LONG_2r,
1178 using the REL* operands.
1179 (LONG_2br, LONG_Dr): Likewise, from LONG_2b, LONG_D.
1180 (SHORT_D1r, SHORT_D2Br, LONG_Dbr): Renamed from SHORT_D1, SHORT_D2B,
1181 LONG_Db, using REL* operands.
1182 (SHORT_U, SHORT_A5S): Removed stray alternatives.
1183 (d30v_opcode_table): Use new *r formats.
1185 2000-02-28 Nick Clifton <nickc@redhat.com>
1187 * m32r-desc.c (m32r_cgen_cpu_open): Replace 'flags' with
1188 'signed_overflow_ok_p'.
1190 2000-02-27 Eli Zaretskii <eliz@is.elta.co.il>
1192 * Makefile.am (stamp-lib): Use $(LIBTOOL) --config to get the
1193 name of the libtool directory.
1194 * Makefile.in: Rebuild.
1196 2000-02-24 Nick Clifton <nickc@redhat.com>
1198 * cgen-opc.c (cgen_set_signed_overflow_ok): New function.
1199 (cgen_clear_signed_overflow_ok): New function.
1200 (cgen_signed_overflow_ok_p): New function.
1202 2000-02-23 Andrew Haley <aph@redhat.com>
1204 * m32r-asm.c, m32r-desc.c, m32r-desc.h, m32r-dis.c,
1205 m32r-ibld.c, m32r-opc.h: Rebuild.
1207 2000-02-23 Linas Vepstas <linas@linas.org>
1209 * i370-dis.c, i370-opc.c: New.
1211 * disassemble.c (ARCH_i370): Define.
1212 (disassembler): Handle it.
1214 * Makefile.am: Add support for Linux/IBM 370.
1215 * configure.in: Likewise.
1217 * Makefile.in: Regenerate.
1218 * configure: Likewise.
1220 2000-02-22 Chandra Chavva <cchavva@redhat.com>
1222 * d30v-opc.c (d30v_opcode_tab) : Added FLAG_NOT_WITH_ADDSUBppp to
1223 ST2H, STB, STH, STHH, STW and ST2H opcodes to prohibit parallel
1226 2000-02-22 Andrew Haley <aph@redhat.com>
1228 * mips-dis.c (_print_insn_mips): New arg for OPCODE_IS_MEMBER:
1230 * mips-opc.c (G6): New define.
1231 (mips_builtin_op): Add "move" definition for -gp32.
1233 2000-02-22 Ian Lance Taylor <ian@zembu.com>
1235 From Grant Erickson <gerickso@Brocade.COM>:
1236 * ppc-opc.c: Correct dcread--it takes 3 arguments, not 2.
1238 2000-02-21 Alan Modra <alan@spri.levels.unisa.edu.au>
1240 * dis-buf.c (buffer_read_memory): Change `length' param and all int
1243 2000-02-17 J"orn Rennecke <amylaar@redhat.co.uk>
1245 * sh-dis.c (print_movxy, print_insn_ddt, print_dsp_reg): New functions.
1246 (print_insn_ppi): Likewise.
1247 (print_insn_shx): Use info->mach to select appropriate insn set.
1248 Add support for sh-dsp. Remove FD_REG_N support.
1249 * sh-opc.h (sh_nibble_type): Add new values for sh-dsp support.
1250 (sh_arg_type): Likewise. Remove FD_REG_N.
1251 (sh_dsp_reg_nums): New enum.
1252 (arch_sh1, arch_sh2, arch_sh3, arch_sh3e, arch_sh4): New macros.
1253 (arch_sh_dsp, arch_sh3_dsp, arch_sh1_up, arch_sh2_up): Likewise.
1254 (arch_sh3_up, arch_sh3e_up, arch_sh4_up, arch_sh_dsp_up): Likewise.
1255 (arch_sh3_dsp_up): Likewise.
1256 (sh_opcode_info): New field: arch.
1257 (sh_table): Split up insn with FD_REG_N into ones with F_REG_N and
1258 D_REG_N. Fill in arch field. Add sh-dsp insns.
1260 2000-02-14 Fernando Nasser <fnasser@totem.to.redhat.com>
1262 * arm-dis.c: Change flavor name from atpcs-special to
1263 special-atpcs to prevent name conflict in gdb.
1264 (get_arm_regname_num_options, set_arm_regname_option,
1265 get_arm_regnames): New functions. API to access the several
1266 flavor of register names. Note: Used by gdb.
1267 (print_insn_thumb): Use the register name entry from the currently
1268 selected flavor for LR and PC.
1270 2000-02-10 Nick Clifton <nickc@redhat.com>
1272 * mcore-opc.h (enum mcore_opclass): Add MULSH and OPSR
1274 (mcore_table): Add "idly4", "psrclr", "psrset", "mulsh" and
1275 "mulsh.h" instructions.
1276 * mcore-dis.c (imsk array): Add masks for MULSH and OPSR
1278 (print_insn_mcore): Add support for little endian targets.
1279 Add support for MULSH and OPSR classes.
1281 2000-02-07 Nick Clifton <nickc@redhat.com>
1283 * arm-dis.c (parse_arm_diassembler_option): Rename again.
1284 Previous delat did not take.
1286 2000-02-03 Timothy Wall <twall@redhat.com>
1288 * dis-buf.c (buffer_read_memory): Use octets_per_byte field
1289 to adjust target address bounds checking and calculate the
1290 appropriate octet offset into data.
1292 2000-01-27 Nick Clifton <nickc@redhat.com>
1294 * arm-dis.c: (parse_disassembler_option): Rename to
1295 parse_arm_disassembler_option and allow to be exported.
1297 * disassemble.c (disassembler_usage): New function: Print out any
1298 target specific disassembler options.
1299 Call arm_disassembler_options() if the ARM architecture is being
1302 * arm-dis.c (NUM_ELEM): Define this macro if not already
1304 (arm_regname): New struct type for ARM register names.
1305 (arm_toggle_regnames): Delete.
1306 (parse_disassembler_option): Use register name structure.
1307 (print_insn): New function: Combines duplicate code found in
1308 print_insn_big_arm and print_insn_little_arm.
1309 (print_insn_big_arm): Call print_insn.
1310 (print_insn_little_arm): Call print_insn.
1311 (print_arm_disassembler_options): Display list of supported,
1312 ARM specific disassembler options.
1314 2000-01-27 Thomas de Lellis <tdel@windriver.com>
1316 * arm-dis.c (printf_insn_big_arm): Treat ELF symbols with the
1317 ARM_STT_16BIT flag as Thumb code symbols.
1319 * arm-dis.c (printf_insn_little_arm): Ditto.
1321 2000-01-25 Thomas de Lellis <tdel@windriver.com>
1323 * arm-dis.c (printf_insn_thumb): Prevent double dumping
1324 of raw thumb instructions.
1326 2000-01-20 Nick Clifton <nickc@redhat.com>
1328 * mcore-opc.h (mcore_table): Add "add" as an alias for "addu".
1330 2000-01-03 Nick Clifton <nickc@cygnus.com>
1332 * arm-dis.c (streq): New macro.
1333 (strneq): New macro.
1334 (force_thumb): ew local variable.
1335 (parse_disassembler_option): New function: Parse a single, ARM
1336 specific disassembler command line switch.
1337 (parse_disassembler_option): Call parse_disassembler_option to
1338 parse individual command line switches.
1339 (print_insn_big_arm): Check force_thumb.
1340 (print_insn_little_arm): Check force_thumb.
1342 For older changes see ChangeLog-9899
1348 version-control: never