opcodes/ChangeLog

   1 2001-04-24  Christian Groessler  <cpg@aladdin.de>
   2
   3         * z8k-dis.c: add names of control registers (ctrl_names);
   4         (seg_length): provides instruction length fixup for segmented
   5         mode; (unpack_instr): correctly handle ARG_DISP16, ARG_DISP12,
   6         CLASS_0DISP7, CLASS_1DISP7, CLASS_DISP8 and CLASS_PR cases;
   7         (unparse_intr): handle CLASS_PR, print addresses without '#'
   8         * z8k-opc.h: re-created with new z8kgen
   9         * z8kgen.c: merged in fixes which were in existing z8k-opc.h; new
  10         entries for ldctl/ldctlb instruction
  11
  12 2001-04-06  Andreas Jaeger  <aj@suse.de>
  13
  14         * i386-dis.c: Add ffreep instruction.
  15
  16 2001-03-30  Alexandre Oliva  <aoliva@redhat.com>
  17
  18         * ppc-opc.c (insert_mbe): Shift mask initializer as long.
  19
  20 2001-03-24  Alan Modra  <alan@linuxcare.com.au>
  21
  22         * i386-dis.c (PREGRP25): Define.
  23         (dis386_twobyte_att): Use here in place of "movntq" entry.
  24         (dis386_twobyte_intel): Likewise.
  25         (prefix_user_table): Add PREGRP25 entry for "movntq" and "movntdq".
  26         (PREGRP26): Define.
  27         (dis386_twobyte_att): Use here.
  28         (dis386_twobyte_intel): Likewise.
  29         (prefix_user_table): Add PREGRP26 entry for "punpcklqdq".
  30         (prefix_user_table <maskmovdqu>): XM operand, not MX.
  31         (prefix_user_table): Cosmetic changes to "bad" entries.
  32
  33 2001-03-23  Nick Clifton  <nickc@redhat.com>
  34
  35         * mips-opc.c: Remove extraneous whitespace.
  36         * mips-dis.c: Remove extraneous whitespace.
  37
  38 2001-03-22  Ben Elliston  <bje@redhat.com>
  39
  40         * cgen-asm.in (@arch@_cgen_assemble_insn): Move tmp_errmsg
  41         declaration inside CGEN_VERBOSE_ASSEMBLER_ERRORS conditional.
  42         * cgen-ibld.in (put_insn_int_value): Mark cd parameter as unused
  43         to allay a compiler warning.
  44
  45 2001-03-22  Alan Modra  <alan@linuxcare.com.au>
  46
  47         * i386-dis.c (dis386_twobyte_att): Add entries for paddq, psubq.
  48         (dis386_twobyte_intel): Likewise.
  49         (twobyte_has_modrm): Set entry for paddq, psubq.
  50
  51 2001-03-20  Patrick Macdonald  <patrickm@redhat.com>
  52
  53         * cgen-dis.in (print_insn_@arch@): Add support for target machine
  54         determination via CGEN_COMPUTE_MACH.
  55         * fr30-desc.c: Regenerate.
  56         * fr30-dis.c: Regenerate.
  57         * fr30-opc.h: Regenerate.
  58         * m32r-desc.c: Regenerate.
  59         * m32r-dis.c: Regenerate.
  60         * m32r-opc.h: Regenerate.
  61         * m32r-opinst.c: Regenerate.
  62
  63 2001-03-20  H.J. Lu  <hjl@gnu.org>
  64
  65         * configure.in: Remove the redundent AC_ARG_PROGRAM.
  66         * configure: Rebuild.
  67
  68 2001-03-19  Jim Wilson  <wilson@redhat.com>
  69
  70         * ia64-gen.c (fetch_insn_class): If xsect, then ignore comment and
  71         notestr if larger than xsect.
  72         (in_class): Handle format M5.
  73         * ia64-asmtab.c: Regnerate.
  74
  75 2001-03-19  John David Anglin  <dave@hiauly1.hia.nrc.ca>
  76
  77         * vax-dis.c (print_insn_vax): Only fetch two bytes if the info buffer
  78         has more than one byte left to read.
  79
  80 2001-03-16  Martin Schwidefsky  <schwidefsky@de.ibm.com>
  81
  82         * s390-opc.c: Add new opcodes.  Smooth out formatting.
  83         * s390-opc.txt: Add new opcodes.
  84
  85 2001-03-06  Nick Clifton  <nickc@redhat.com>
  86
  87         * arm-dis.c (print_insn_thumb): Compute destination address
  88         of BLX(1) instruction by taking bit 1 from PC and not from bit
  89         0 of the offset.
  90
  91 2001-03-06  Igor Shevlyakov  <igor@windriver.com>
  92
  93         * m68k-dis.c (print_insn_m68k): Recognize Coldfire CPUs
  94         so command line switches will work.
  95
  96 2001-03-05  Dave Brolley  <brolley@redhat.com>
  97
  98         * fr30-asm.c: Regenerate.
  99         * fr30-desc.c: Regenerate.
 100         * fr30-desc.h: Regenerate.
 101         * fr30-dis.c: Regenerate.
 102         * fr30-ibld.c: Regenerate.
 103         * fr30-opc.c: Regenerate.
 104         * fr30-opc.h: Regenerate.
 105         * m32r-asm.c: Regenerate.
 106         * m32r-desc.c: Regenerate.
 107         * m32r-desc.h: Regenerate.
 108         * m32r-dis.c: Regenerate.
 109         * m32r-ibld.c: Regenerate.
 110         * m32r-opc.c: Regenerate.
 111         * m32r-opc.h: Regenerate.
 112         * m32r-opinst.c: Regenerate.
 113
 114 2001-02-28  Igor Shevlyakov  <igor@windriver.com>
 115
 116         * m68k-opc.c: fix cpushl according to Motorola. Enable
 117         bunch of instructions for Coldfire 5407 and add all new.
 118
 119 2001-02-27  Alan Modra  <alan@linuxcare.com.au>
 120
 121         * configure.in (BFD_VERSION): Do without grep.
 122         * configure: Regenerate.
 123         * Makefile.am: Run "make dep-am".
 124         * Makefile.in: Regenerate.
 125
 126 2001-02-23  David Mosberger  <davidm@hpl.hp.com>
 127
 128         * ia64-opc-a.c: Add missing pseudo-ops for "cmp" and "cmp4".
 129         * ia64-asmtab.c: Regenerate.
 130
 131 2001-02-21  David Mosberger  <davidm@hpl.hp.com>
 132
 133         * ia64-opc-d.c (ia64_opcodes_d): Break the "add" pattern into two
 134         separate variants: one for IMM22 and the other for IMM14.
 135         * ia64-asmtab.c: Regenerate.
 136
 137 2001-02-21  Greg McGary  <greg@mcgary.org>
 138
 139         * cgen-opc.c (cgen_get_insn_value): Add missing `return'.
 140
 141 2001-02-20  H.J. Lu  <hjl@gnu.org>
 142
 143         * Makefile.am (ia64-ic.tbl): Remove the target.
 144         (ia64-raw.tbl): Likewise.
 145         (ia64-waw.tbl): Likewise.
 146         (ia64-war.tbl): Likewise.
 147         (ia64-asmtab.c): Generate it in the source directory.
 148         * Makefile.in: Regenerated.
 149
 150 2001-02-18  lars brinkhoff  <lars@nocrew.org>
 151
 152         * Makefile.am: Add PDP-11 target.
 153         * configure.in: Likewise.
 154         * disassemble.c: Likewise.
 155         * pdp11-dis.c: New file.
 156         * pdp11-opc.c: New file.
 157
 158 2001-02-14  Jim Wilson  <wilson@redhat.com>
 159
 160         * ia64-ic.tbl: Update from Intel.  Add setf to fr-writers.
 161         * ia64-asmtab.c: Regenerate.
 162
 163 Mon Feb 12 17:41:26 CET 2001  Jan Hubicka  <jh@suse.cz>
 164
 165         * i386-dis.c (prefix_user_t): Add 'Y' to SSE ineger converison
 166         instructions.
 167         (putop): Handle 'Y'
 168
 169 2001-02-11  Maciej W. Rozycki  <macro@ds2.pg.gda.pl>
 170
 171         * mips-dis.c (print_insn_arg): Use top four bits of the address of
 172         the following instruction not of the jump itself for the jump
 173         target.
 174         (print_mips16_insn_arg): Likewise.
 175
 176 2001-02-11  Michael Sokolov  <msokolov@ivan.Harhan.ORG>
 177
 178         * Makefile.am (stamp-lib): ranlib the libopcodes.a in the build
 179         directory.
 180         * Makefile.in: Regenerate.
 181
 182 2001-02-09  Schwidefsky  <schwidefsky@de.ibm.com>
 183
 184         * Makefile.am: Add linux target for S/390.
 185         * Makefile.in: Likewise.
 186         * configure.in: Likewise.
 187         * disassemble.c: Likewise.
 188         * s390-dis.c: New file.
 189         * s390-mkopc.c: New file.
 190         * s390-opc.c: New file.
 191         * s390-opc.txt: New file.
 192
 193 2001-02-05  Jim Wilson  <wilson@redhat.com>
 194
 195         * ia64-asmtab.c: Revert 2000-12-16 change.
 196
 197 2001-02-02  Patrick Macdonald  <patrickm@redhat.com>
 198
 199         * fr30-desc.h: Regenerate with CGEN_MAX_SYNTAX_ELEMENTS.
 200         * m32r-desc.h: Regenerate.
 201
 202 Thu Feb  1 16:29:06 MET 2001  Jan Hubicka  <jh@suse.cz>
 203
 204         * i386-dis.c (dis386_att, grps): Use 'T' for push/pop
 205         (putop): Handle 'T', alphabetize order, fix 'I' handling in Intel syntax
 206
 207 2001-01-14  Alan Modra  <alan@linuxcare.com.au>
 208
 209         * hppa-dis.c (print_insn_hppa): Handle '>' and '<' arg types.
 210
 211 2001-01-13  Nick Clifton  <nickc@redhat.com>
 212
 213         * disassemble.c: Remove spurious white space.
 214
 215 Sat Jan 13 01:48:24 MET 2001  Jan Hubicka  <jh@suse.cz>
 216
 217         * i386-dis.c (dis386_att, disx86_64_att): Fix ret, lret and iret
 218         templates.
 219
 220 2001-01-11  Peter Targett  <peter.targett@arccores.com>
 221
 222         * configure.in: Add arc-ext.lo for bfd_arc_arch selection.
 223         * Makefile.am (C_FILES): Add arc-ext.c.
 224         (ALL_MACHINES) Add arc-ext.lo.
 225         (INCLUDES) Add opcode directory to list.
 226         New dependency entry for arc-ext.lo.
 227         * disassemble.c (disassembler): Correct call to
 228         arc_get_disassembler.
 229         * arc-opc.c: New update for ARC, including full base
 230         instructions for ARC variants.
 231         * arc-dis.h, arc-dis.c: New update for ARC, including
 232         extensibility functionality.
 233         * arc-ext.h, arc-ext.c: New files for handling extensibility.
 234
 235 2001-01-10  Jan Hubicka  <jh@suse.cz>
 236
 237         * i386-dis.c (PREGRP15 - PREGRP24): New.
 238         (dis386_twobyt): Add SSE2 instructions.
 239         (twobyte_uses_SSE_prefix: Rename from ... ; add new SSE instructions.
 240         (twobyte_uses_f3_prefix): ... this one.
 241         (grps): Add SSE instructions.
 242         (prefix_user_table): Add two new slots; add SSE2 instructions.
 243         (print_insn_i386): Rename uses_f3_prefix to uses_SSE_prefix;
 244         Handle the REPNZ and Data16 prefixes as well; do proper lookup
 245         to prefix_user_table.
 246         (OP_E): Accept mfence and lfence as well.
 247         (OP_MMX): Data16 prefix turns MMX to SSE; support REX extensions.
 248         (OP_XMM): Support REX extensions.
 249         (OP_EM): Likewise.
 250         (OP_EX): Likewise.
 251
 252 2001-01-09  Nick Clifton  <nickc@redhat.com>
 253
 254         * arm-dis.c (print_insn): Set pc to zero for instructions with
 255         a reloc associated with them.
 256
 257 2001-01-09  Jeff Johnston  <jjohnstn@redhat.com>
 258
 259         * cgen-asm.in (parse_insn_normal): Changed syn to be
 260         CGEN_SYNTAX_CHAR_TYPE.  Changed all references to *syn
 261         as character to use CGEN_SYNTAX_CHAR macro and all comparisons
 262         to '\0' to use 0 instead.
 263         * cgen-dis.in (print_insn_normal): Ditto.
 264         * cgen-ibld.in (insert_insn_normal, extract_insn_normal): Ditto.
 265
 266 2001-01-05  Jan Hubicka  <jh@suse.cz>
 267
 268         * i386-dis.c: Add x86_64 support.
 269         (rex): New static variable.
 270         (REX_MODE64, REX_EXTX, REX_EXTY, REX_EXTZ): New constants.
 271         (USED_REX): New macro.
 272         (Ev, Ed, Rm, Iq, Iv64, Cm, Dm, Rm*, Ob64, Ov64): New macros.
 273         (OP_I64, OP_OFF64, OP_IMREG): New functions.
 274         (OP_REG, OP_OFF): Declare.
 275         (get64, get32, get32s): New functions.
 276         (r??_reg): New constants.
 277         (dis386_att): Change templates of instruction implicitly promoted
 278         to 64bit; change e?? to RMe?? for unwind RM byte instructions.
 279         (grps): Likewise.
 280         (dis386_intel): Likewise.
 281         (dixx86_64_att): New table based on dis386_att.
 282         (dixx86_64_intel): New table based on dis386_intel.
 283         (names64, names8rex): New global variable.
 284         (names32, names16): Add extended registers.
 285         (prefix_user_t): Recognize rex prefixes.
 286         (prefix_name): Print REX prefixes nicely.
 287         (op_riprel): New global variable.
 288         (start_pc): Set type to bfd_vma.
 289         (print_insn_i386): Detect the 64bit mode and use proper table;
 290         move ckprefix after initializing the buffer; output unused rex prefixes;
 291         output information about target of RIP relative addresses.
 292         (putop): Support 'O' and 'I'. Update handling of "P', 'Q', 'R' and 'S';
 293         (print_operand_value): New function.
 294         (OP_E, OP_G, OP_REG, OP_I, OP_J, OP_DIR, OP_OFF, OP_D): Add support for
 295         REX prefix and new modes.
 296         (get64, get32s): New.
 297         (get32): Return bfd_signed_vma type.
 298         (set_op): Initialize the op_riprel.
 299         * disassemble.c (disassembler): Recognize the x86-64 disassembly.
 300
 301 2001-01-03  Richard Sandiford  <r.sandiford@redhat.com>
 302
 303          cgen-dis.in (read_insn): Use bfd_get_bits()
 304
 305 2001-01-02  Richard Sandiford  <rsandifo@redhat.com>
 306
 307         * cgen-dis.c (hash_insn_array): Use bfd_put_bits().
 308         (hash_insn_list): Likewise
 309         * cgen-ibld.in (insert_1): Use bfd_put_bits() and bfd_get_bits().
 310         (extract_1): Use bfd_get_bits().
 311         (extract_normal): Apply sign extension to both extraction
 312         methods.
 313         * cgen-opc.c (cgen_get_insn_value): Use bfd_get_bits()
 314         (cgen_put_insn_value): Use bfd_put_bits()
 315
 316 2000-12-28  Frank Ch. Eigler  <fche@redhat.com>
 317
 318         * cgen-asm.in (parse_insn_normal): Print better error message for
 319         instructions with missing operands.
 320
 321 2000-12-21  Santeri Paavolainen <santtu@ssh.com>
 322
 323         * cgen-opc.c: Include alloca.h if HAVE_ALLOCA_H is defined.
 324
 325 2000-12-16  Nick Clifton  <nickc@redhat.com>
 326
 327         * Makefile.in: Regenerate.
 328         * aclocal.m4: Regenerate.
 329         * config.in: Regenerate.
 330         * configure.in: Add spacing.
 331         * configure: Regenerate.
 332         * ia64-asmtab.c: Regenerate.
 333         * po/opcodes.pot: Regenerate.
 334
 335 2000-12-12  Frank Ch. Eigler  <fche@redhat.com>
 336
 337         * cgen-asm.in (@arch@_cgen_assemble_insn): Prefer printing insert-time
 338         error messages over later parse-time ones.
 339
 340 2000-12-12  Jim Wilson  <wilson@redhat.com>
 341
 342         * ia64-dis.c (print_insn_ia64): Cast away const on ia64_free_opcode
 343         argument.
 344         * ia64-gen.c (insert_deplist): Cast sizeof result to int.
 345         (print_dependency_table): Print NULL if semantics field not set.
 346         (insert_opcode_dependencies): Mark cmp parameter as unused.
 347         (print_main_table): Use fprintf_vma to print long long fields.
 348         (main): Mark argv paramter as unused.  Convert to old style definition.
 349         * ia64-opc.c (ia64_find_dependency): Cast sizeof result to int.
 350         * ia64-asmtab.c: Regnerate.
 351
 352 2000-12-09  Nick Clifton  <nickc@redhat.com>
 353
 354         * m32r-dis.c (print_insn): Prevent re-read of instruction from
 355         wrong address.
 356
 357         * fr30-dis.c: Regenerate.
 358
 359 2000-12-08  Peter Targett  <peter.targett@arccores.com>
 360
 361         * configure.in: Add arc-ext.lo for bfd_arc_arch selection.
 362         * Makefile.am (C_FILES): Add arc-ext.c.
 363         (ALL_MACHINES) Add arc-ext.lo.
 364         (INCLUDES) Add opcode directory to list.
 365         New dependency entry for arc-ext.lo.
 366         * disassemble.c (disassembler): Correct call to
 367         arc_get_disassembler.
 368         * arc-opc.c: New update for ARC, including full base
 369         instructions for ARC variants.
 370         * arc-dis.h, arc-dis.c: New update for ARC, including
 371         extensibility functionality.
 372         * arc-ext.h, arc-ext.c: New files for handling extensibility.
 373
 374 2000-12-03  Chris Demetriou   cgd@sibyte.com
 375
 376         * mips-opc.c (mips_builtin_opcodes): Use the WR_HILO, RD_HILO,
 377         MOD_HILO, and MOD_LO macros.
 378
 379         * mips-opc.c (M1, M2): Delete.
 380         (mips_builtin_opcodes): Remove all uses of M1.
 381
 382         * mips-opc.c (mips_builtin_opcodes): Make the dmfc2 and dmtc2
 383         instructions take "G" format second operands and use the
 384         correct flags.
 385         There are mfc3 and mtc3 opcodes, so add dmfc3 and dmtc3 opcodes to
 386         match.
 387         Delete "sel" code operands from mfc1 and mtc1.
 388         Add MIPS64 opcode changes (dclo, dclz), and "sel" code variants
 389         for dm[ft]c[023].
 390
 391 2000-12-03  Ed Satterthwaite  ehs@sibyte.com  and
 392             Chris Demetriou   cgd@sibyte.com
 393
 394         * mips-opc.c (mips_builtin_opcodes): Finish additions
 395         for MIPS32 support, and clean up existing entries for
 396         aesthetics, consistency with the MIPS32 ISA, and
 397         with consistency the rest of the table.
 398
 399 2000-12-01  Nick Clifton  <nickc@redhat.com>
 400
 401         * mips16-opc.c (mips16_opcodes): Add initialiser for membership
 402         field.
 403
 404 2000-12-01  Chris Demetriou <cgd@sibyte.com>
 405
 406         mips-dis.c (print_insn_arg): Handle new 'U' and 'J' argument
 407         specifiers.  Update 'B' for new constant names, and remove
 408         'm'.
 409         mips-opc.c (mips_builtin_opcodes): Place "pref" and "ssnop"
 410         near the top of the array, so they are disassembled properly.
 411         Enable "ssnop" for MIPS32.  Add "break" variant with 20 bit
 412         code for MIPS32.  Update "clo" and "clz" to use 'U' operand
 413         specifier.  Add 'H' format specifier variants for "mfc1,"
 414         "mfc2," "mfc3," "mtc1," "mtc2," and "mtc3" for MIPS32.  Update
 415         MIPS32 "sdbbp" to use 'B' operand specifier.  Add MIPS32
 416         "wait" variant which uses 'J' operand specifier.
 417
 418         * mips-dis.c (set_mips_isa_type): Update to use
 419         CPU_UNKNOWN and ISA_* constants.  Add bfd_mach_mips32 case.
 420         Replace bfd_mach_mips4K with bfd_mach_mips32_4k case.
 421         * mips-opc.c (I32): New constant for instructions added in
 422         MIPS32.
 423         (P4): Delete.
 424         (mips_builtin_opcodes) Replace all uses of P4 with I32.
 425
 426         * mips-dis.c (set_mips_isa_type): Add cases for
 427         bfd_mach_mips5 and bfd_mach_mips64.
 428         * mips-opc.c (I64): New definitions.
 429
 430         * mips-dis.c (set_mips_isa_type): Add case for
 431         bfd_mach_mips_sb1.
 432
 433 2000-11-28  Hans-Peter Nilsson  <hp@bitrange.com>
 434
 435         * sh-dis.c (print_insn_ddt): Make insn_x, insn_y unsigned.
 436         (print_insn_ppi): Make nib1, nib2, nib3 unsigned.
 437         Initialize variable dc to NULL.
 438         (print_insn_shx): Remove unused label d_reg_n.
 439
 440 2000-11-24  Nick Clifton  <nickc@redhat.com>
 441
 442         * arm-opc.h: Add new opcode formatting parameter 'B'.
 443         (arm_opcodes): Add XScale, v5, and v5te instructions.
 444         (thumb_opcodes): Add v5t instructions.
 445
 446         * arm-dis.c (print_insn_arm): Handle new 'B' format
 447         parameter.
 448         (print_insn_thumb): Decode BLX(1) instruction.
 449
 450 2000-11-21  Chris Demetriou  <cgd@sibyte.com>
 451
 452         * mips-opc.c: Fix file header comment.
 453
 454 2000-11-14  Hans-Peter Nilsson  <hp@axis.com>
 455
 456         * cris-dis.c (cris_get_disassembler): If abfd is NULL, return
 457         print_insn_cris_with_register_prefix.
 458
 459 2000-11-11  Alexandre Oliva  <aoliva@redhat.com>
 460
 461         * sh-opc.h: The operand of `mov.w r0, (<disp>,GBR)' is IMM1, not 0.
 462
 463 2000-11-07  Matthew Green  <mrg@redhat.com>
 464
 465         * cgen-dis.in (print_insn): All insns which can fit into insn_value
 466         must be loaded there in their entirety.
 467
 468 2000-10-20  Jakub Jelinek  <jakub@redhat.com>
 469
 470         * sparc-dis.c (v9a_asr_reg_names): Add v9b ASRs.
 471         (compute_arch_mask): Add v8plusb and v9b machines.
 472         (print_insn_sparc): siam mode decoding, accept ASRs up to 25.
 473         * sparc-opc.c: Support for Cheetah instruction set.
 474         (prefetch_table): Add #invalidate.
 475
 476 2000-10-16  Nick Clifton  <nickc@redhat.com>
 477
 478         * mcore-dis.c (imsk): Change mask for OC to 0xFE00.
 479
 480 2000-10-06  Dave Brolley  <brolley@redhat.com>
 481
 482         * fr30-desc.h: Regenerate.
 483         * m32r-desc.h: Regenerate.
 484         * m32r-ibld.c: Regenerate.
 485
 486 2000-10-05  Jim Wilson  <wilson@redhat.com>
 487
 488         * ia64-ic.tbl: Update from Intel.
 489         * ia64-asmtab.c: Regenerate.
 490
 491 2000-10-04  Kazu Hirata  <kazu@hxi.com>
 492
 493         * ia64-gen.c: Convert C++-style comments to C-style comments.
 494         * tic54x-dis.c: Likewise.
 495
 496 2000-09-29  Hans-Peter Nilsson  <hp@axis.com>
 497
 498         Changes to add dollar prefix to registers for files where user symbols
 499         don't have a leading underscore.  Fix formatting.
 500         * cris-dis.c (REGISTER_PREFIX_CHAR): New.
 501         (format_reg): Add parameter with_reg_prefix.  All callers changed.
 502         (print_with_operands): Ditto.
 503         (print_insn_cris_generic): Renamed from print_insn_cris, add
 504         parameter with_reg_prefix.
 505         (print_insn_cris_with_register_prefix,
 506         print_insn_cris_without_register_prefix, cris_get_disassembler):
 507         New.
 508         * disassemble.c (disassembler) [ARCH_cris]: Call cris_get_disassembler.
 509
 510 2000-09-22  Jim Wilson  <wilson@redhat.com>
 511
 512         * ia64-opc-f.c (ia64_opcodes_f): Add fpcmp pseudo-ops for
 513         gt, ge, ngt, and nge.
 514         * ia64-asmtab.c: Regenerate.
 515
 516         * ia64-dis.c (print_insn_ia64): Revert Aug 7 byte skip count change.
 517         * ia64-gen.c (parse_semantics): Handle IA64_DVS_STOP.
 518         (lookup_specifier): Handle "PR%, 1 to 15" and "PR%, 16 to 62".
 519         * ia64-ic.tbl, ia64-raw.tbl, ia64-war.tbl, ia64-waw.tbl: Update.
 520         * ia64-asmtab.c: Regnerate.
 521
 522 2000-09-13  Anders Norlander  <anorland@acc.umu.se>
 523
 524         * mips-opc.c (mips_builtin_opcodes): Support cache instruction on 4K cores.
 525         Add mfc0 and mtc0 with sub-selection values.
 526         Add clo and clz opcodes.
 527         Add msub and msubu instructions for MIPS32.
 528         Add madd/maddu aliases for mad/madu for MIPS32.
 529         Support wait, deret, eret, movn, pref for MIPS32.
 530         Support tlbp, tlbr, tlbwi, tlbwr.
 531         (P4): New define.
 532
 533         * mips-dis.c (print_insn_arg): Print sdbbp 'm' args.
 534         (print_insn_arg): Handle 'H' args.
 535         (set_mips_isa_type): Recognize 4K.
 536         Use CPU_* defines instead of hardcoded numbers.
 537
 538 2000-09-11  Catherine Moore <clm@redhat.com>
 539
 540         * d30v-opc.c (d30v_operand_t): New operand type Rb2.
 541         (d30v_format_tab): Use Rb2 for modinc and moddec.
 542
 543 2000-09-07  Catherine Moore  <clm@redhat.com>
 544
 545         * d30v-opc.c (d30v_format_tab): Use format Ra for
 546         modinc and moddec.
 547
 548 2000-09-06  Alexandre Oliva  <aoliva@redhat.com>
 549
 550         * configure: Rebuilt with new libtool.m4.
 551
 552 2000-09-05  Nick Clifton  <nickc@redhat.com>
 553
 554         * configure: Regenerate.
 555         * po/opcodes.pot: Regenerate.
 556
 557 2000-08-31  Alexandre Oliva  <aoliva@redhat.com>
 558
 559         * acinclude.m4: Include libtool and gettext macros from the
 560         top level.
 561         * aclocal.m4, configure: Rebuilt.
 562
 563 2000-08-30  Kazu Hirata  <kazu@hxi.com>
 564
 565         * tic80-dis.c: Fix formatting.
 566
 567 2000-08-29  Kazu Hirata  <kazu@hxi.com>
 568
 569         * w65-dis.c: Fix formatting.
 570
 571 2000-08-28  Mark Hatle  <mhatle@mvista.com>
 572
 573         * ppc-opc.c: Add XTLB macro for a few PPC 4xx extended mnemonics.
 574         (powerpc_opcodes): Add table entries for PPC 405 instructions.
 575         Changed rfci, icbt, mfdcr, dccci, mtdcr, iccci from PPC to PPC403
 576         instructions.  Added extended mnemonic mftbl as defined in the
 577         405GP manual for all PPCs.
 578
 579 2000-08-28  Jim Wilson  <wilson@redhat.com>
 580
 581         * ia64-dis.c (print_insn_ia64): Add failed label after ia64_free_opcode
 582         call.  Change last goto to use failed instead of done.
 583
 584 2000-08-28  Dave Brolley  <brolley@redhat.com>
 585
 586         * cgen-ibld.in (cgen_put_insn_int_value): New function.
 587         (insert_normal): Allow for non-zero word_offset with CGEN_INT_INSN_P.
 588         (insert_insn_normal): Use cgen_put_insn_int_value with CGEN_INT_INSN_P.
 589         (extract_normal): Allow for non-zero word_offset with CGEN_INT_INSN_P.
 590         * cgen-dis.in (read_insn): New static function.
 591         (print_insn): Use read_insn to read the insn into the buffer and set
 592         up for disassembly.
 593         (print_insn): in CGEN_INT_INSN_P, make sure that the entire insn is
 594         in the buffer.
 595         * fr30-asm.c: Regenerated.
 596         * fr30-desc.c: Regenerated.
 597         * fr30-desc.h: Regenerated.
 598         * fr30-dis.c: Regenerated.
 599         * fr30-ibld.c: Regenerated.
 600         * fr30-opc.c: Regenerated.
 601         * fr30-opc.h: Regenerated.
 602         * m32r-asm.c: Regenerated.
 603         * m32r-desc.c: Regenerated.
 604         * m32r-desc.h: Regenerated.
 605         * m32r-dis.c: Regenerated.
 606         * m32r-ibld.c: Regenerated.
 607         * m32r-opc.c: Regenerated.
 608
 609 2000-08-28  Kazu Hirata  <kazu@hxi.com>
 610
 611         * tic30-dis.c: Fix formatting.
 612
 613 2000-08-27  Kazu Hirata  <kazu@hxi.com>
 614
 615         * sh-dis.c: Fix formatting.
 616
 617 2000-08-24  David Edelsohn  <dje@watson.ibm.com>
 618
 619         * ppc-opc.c (powerpc_opcodes): Add rfid, mtsrd, mtsrdin, mtmsrd.
 620
 621 2000-08-24  Kazu Hirata  <kazu@hxi.com>
 622
 623         * z8k-dis.c: Fix formatting.
 624
 625 2000-08-16  Jim Wilson  <wilson@redhat.com>
 626
 627         * ia64-ic.tbl (pr-readers-nobr-nomovpr): Add addl, adds.  Delete
 628         break, mov-immediate, nop.
 629         * ia64-opc-f.c: Delete fpsub instructions.
 630         * ia64-opc-m.c: Add POSTINC to all instructions with postincrement
 631         address operand.  Rewrite using macros to avoid long lines.
 632         * ia64-opc.h (POSTINC): Define.
 633         * ia64-asmtab.c: Regenerate.
 634
 635 2000-08-15  Jim Wilson  <wilson@redhat.com>
 636
 637         * ia64-ic.tbl: Add missing entries.
 638
 639 2000-08-08  Jason Eckhardt  <jle@redhat.com>
 640
 641         * i860-dis.c (print_br_address): Change third argument from int
 642         to long.
 643
 644 2000-08-07  Richard Henderson  <rth@redhat.com>
 645
 646         * ia64-dis.c (print_insn_ia64): Get byte skip count correct
 647         for MLI templates.  Handle IA64_OPND_TGT64.
 648
 649 2000-08-04  Ben Elliston  <bje@redhat.com>
 650
 651         * cgen-dis.in, cgen-asm.in, cgen-ibld.in: New files.
 652         * cgen.sh: Likewise.
 653
 654 2000-08-02  Jim Wilson  <wilson@redhat.com>
 655
 656         * ia64-dis.c (print_insn_ia64): Call ia64_free_opcode at end.
 657
 658 2000-07-29  Marek Michalkiewicz  <marekm@linux.org.pl>
 659
 660         * avr-dis.c (avr_operand): Use PARAMS macro in declaration.
 661         Change return type from void to int.  Check the combination
 662         of operands, return 1 if valid.  Fix to avoid BUF overflow.
 663         Report undefined combinations of operands in COMMENT.
 664         Report internal errors to stderr.  Output the adiw/sbiw
 665         constant operand in both decimal and hex.
 666         (print_insn_avr): Disassemble ldd/std with displacement of 0
 667         as ld/st.  Check avr_operand () return value, handle invalid
 668         combinations of operands like unknown opcodes.
 669
 670 2000-07-28  Ben Elliston  <bje@redhat.com>
 671
 672         * Makefile.am (CGEN, CGENDEPS, CGENDIR, CGENFLAGS): New.
 673         (run-cgen, stamp-m32r, stamp-fr30): New targets.
 674         * Makefile.in: Regenerate.
 675         * configure.in: Add --enable-cgen-maint option.
 676         * configure: Regenerate.
 677
 678 2000-07-26  Dave Brolley  <brolley@redhat.com>
 679
 680         * cgen-opc.c (cgen_hw_lookup_by_name): 'i' is now unsigned.
 681         (cgen_hw_lookup_by_num): Ditto.
 682         (cgen_operand_lookup_by_name): Ditto.
 683         (print_address): Ditto.
 684         (print_keyword): Ditto.
 685         * cgen-dis.c (hash_insn_array): Mark unused parameters with
 686         ATTRIBUTE_UNUSED.
 687         * cgen-asm.c (hash_insn_array): Mark unused parameters with
 688         ATTRIBUTE_UNUSED.
 689         (cgen_parse_keyword): Ditto.
 690
 691 2000-07-22  Jason Eckhardt  <jle@redhat.com>
 692
 693         * i860-dis.c: New file.
 694         (print_insn_i860): New function.
 695         (print_br_address): New function.
 696         (sign_extend): New function.
 697         (BITWISE_OP): New macro.
 698         (I860_REG_PREFIX): New macro.
 699         (grnames, frnames, crnames): New structures.
 700
 701         * disassemble.c (ARCH_i860): Define.
 702         (disassembler): Add check for bfd_arch_i860 to set disassemble
 703         function to print_insn_i860.
 704
 705         * Makefile.in (CFILES): Added i860-dis.c.
 706         (ALL_MACHINES): Added i860-dis.lo.
 707         (i860-dis.lo): New dependences.
 708
 709         * configure.in: New bits for bfd_i860_arch.
 710
 711         * configure: Regenerated.
 712
 713 2000-07-20  Hans-Peter Nilsson  <hp@axis.com>
 714
 715         * Makefile.am (CFILES): Add cris-dis.c and cris-opc.c.
 716         (ALL_MACHINES): Add cris-dis.lo and cris-opc.lo.
 717         (cris-dis.lo, cris-opc.lo): New rules.
 718         * Makefile.in: Rebuild.
 719         * configure.in (bfd_cris_arch): New target.
 720         * configure: Rebuild.
 721         * disassemble.c (ARCH_cris): Define.
 722         (disassembler): Support ARCH_cris.
 723         * cris-dis.c, cris-opc.c: New files.
 724         * po/POTFILES.in, po/opcodes.pot: Regenerate.
 725
 726 2000-07-11  Jakub Jelinek  <jakub@redhat.com>
 727
 728         * sparc-opc.c (sparc_opcodes): popc has 0 in rs1, not rs2.
 729         Reported by Bill Clarke <llib@computer.org>.
 730
 731 2000-07-09  Geoffrey Keating  <geoffk@redhat.com>
 732
 733         * ppc-opc.c (powerpc_opcodes): Correct suffix for vslw.
 734         Patch by Randall J Fisher <rfisher@ecn.purdue.edu>.
 735
 736 2000-07-09  Alan Modra  <alan@linuxcare.com.au>
 737
 738         * hppa-dis.c (fput_reg, fput_fp_reg, fput_fp_reg_r, fput_creg,
 739         fput_const, extract_3, extract_5_load, extract_5_store,
 740         extract_5r_store, extract_5R_store, extract_10U_store,
 741         extract_5Q_store, extract_11, extract_14, extract_16, extract_21,
 742         extract_12, extract_17, extract_22): Prototype.
 743         (print_insn_hppa): Rename inner block opcode -> opc to avoid
 744         shadowing outer block.
 745         (GET_BIT): Define.
 746
 747 2000-07-05  DJ Delorie  <dj@redhat.com>
 748
 749         * MAINTAINERS: new
 750
 751 2000-07-04  Alexandre Oliva  <aoliva@redhat.com>
 752
 753         * arm-dis.c (print_insn_arm): Output combinations of PSR flags.
 754
 755 2000-07-03  Marek Michalkiewicz  <marekm@linux.org.pl>
 756
 757         * avr-dis.c (avr_operand): Change _ () to _() around all strings
 758         marked for translation (exception from the usual coding style).
 759         (print_insn_avr): Initialize insn2 to avoid warnings.
 760
 761 2000-07-03  Kazu Hirata  <kazu@hxi.com>
 762
 763         * h8300-dis.c (bfd_h8_disassemble): Improve readability.
 764         * h8500-dis.c: Fix formatting.
 765
 766 2000-07-01  Alan Modra  <alan@linuxcare.com.au>
 767
 768         * Makefile.am (DEP): Fix 2000-06-22.  grep after running dep.sed
 769         (CLEANFILES): Add DEPA.
 770         * Makefile.in: Regenerate.
 771
 772 2000-06-26  Scott Bambrough  <scottb@netwinder.org>
 773
 774         * arm-dis.c (regnames): Add an additional register set to match
 775         the set used by GCC.  Make it the default.
 776
 777 2000-06-22  Alan Modra  <alan@linuxcare.com.au>
 778
 779         * Makefile.am (DEP): grep for leading `/' in DEP1, and fail if we
 780         find one.
 781         * Makefile.in: Regenerate.
 782
 783 2000-06-20  H.J. Lu  <hjl@gnu.org>
 784
 785         * Makefile.am: Rebuild dependency.
 786         * Makefile.in: Rebuild.
 787
 788 2000-06-18  Stephane Carrez  <stcarrez@worldnet.fr>
 789
 790         * Makefile.in, configure: regenerate
 791         * disassemble.c (disassembler): Recognize ARCH_m68hc12,
 792         ARCH_m68hc11.
 793         * m68hc11-dis.c (read_memory, print_insn, print_insn_m68hc12):
 794         New functions.
 795         * configure.in: Recognize m68hc12 and m68hc11.
 796         * m68hc11-dis.c, m68hc11-opc.c: New files for support of m68hc1x
 797         * Makefile.am (CFILES, ALL_MACHINES): New files for disassembly
 798         and opcode generation for m68hc11 and m68hc12.
 799
 800 2000-06-16  Nick Duffek  <nsd@redhat.com>
 801
 802         * disassemble.c (disassembler): Refer to the PowerPC 620 using
 803         bfd_mach_ppc_620 instead of 620.
 804
 805 2000-06-12  Kazu Hirata  <kazu@hxi.com>
 806
 807         * h8300-dis.c: Fix formatting.
 808         (bfd_h8_disassemble): Distinguish adds/subs, inc/dec.[wl]
 809         correctly.
 810
 811 2000-06-09  Denis Chertykov  <denisc@overta.ru>
 812
 813         * avr-dis.c (avr_operand): Bugfix for jmp/call address.
 814
 815 2000-06-07  Denis Chertykov  <denisc@overta.ru>
 816
 817         * avr-dis.c: completely rewritten.
 818
 819 2000-06-02  Kazu Hirata  <kazu@hxi.com>
 820
 821         * h8300-dis.c: Follow the GNU coding style.
 822         (bfd_h8_disassemble) Fix a typo.
 823
 824 2000-06-01  Kazu Hirata  <kazu@hxi.com>
 825
 826         * h8300-dis.c (bfd_h8_disassemble_init): Fix a typo.
 827         (bfd_h8_disassemble): Distinguish the operand size of inc/dev.[wl]
 828         correctly.  Fix a typo.
 829
 830 2000-05-31  Nick Clifton  <nickc@redhat.com>
 831
 832         * opintl.h (_(String)): Explain why dgettext is used instead of
 833         gettext.
 834
 835 2000-05-30  Nick Clifton  <nickc@redhat.com>
 836
 837         * opintl.h (gettext, dgettext, dcgettext, textdomain,
 838         bindtextdomain): Replace defines with those from intl/libgettext.h
 839         to quieten gcc warnings.
 840
 841 2000-05-26  Alan Modra  <alan@linuxcare.com.au>
 842
 843         * Makefile.am: Update dependencies with "make dep-am"
 844         * Makefile.in: Regenerate.
 845
 846 2000-05-25  Alexandre Oliva  <aoliva@redhat.com>
 847
 848         * m10300-dis.c (disassemble): Don't assume 32-bit longs when
 849         sign-extending operands.
 850
 851 2000-05-15  Donald Lindsay  <dlindsay@redhat.com>
 852
 853         * d10v-opc.c (d10v_opcodes): add ALONE tag to all short branches
 854         except brf's.
 855
 856 2000-05-21  Nick Clifton  <nickc@redhat.com>
 857
 858         * Makefile.am (LIBIBERTY): Define.
 859
 860 2000-05-19 Diego Novillo <dnovillo@redhat.com>
 861
 862         * mips-dis.c (REGISTER_NAMES): Rename to STD_REGISTER_NAMES.
 863         (STD_REGISTER_NAMES): New name for REGISTER_NAMES.
 864         (reg_names): Rename to std_reg_names. Change it to a char **
 865         static variable.
 866         (std_reg_names): New name for reg_names.
 867         (set_mips_isa_type): Set reg_names to point to std_reg_names by
 868         default.
 869
 870 2000-05-16  Frank Ch. Eigler  <fche@redhat.com>
 871
 872         * fr30-desc.h: Partially regenerated to account for changed
 873         CGEN_MAX_* -> CGEN_ACTUAL_MAX_* macros.
 874         * m32r-desc.h: Ditto.
 875
 876 2000-05-15  Nick Clifton  <nickc@redhat.com>
 877
 878         * arm-opc.h: Use upper case for flasg in MSR and MRS
 879         instructions.  Allow any bit to be set in the field_mask of
 880         the MSR instruction.
 881
 882         * arm-dis.c (print_insn_arm): Decode _x and _s bits of the
 883         field_mask of an MSR instruction.
 884
 885 2000-05-11  Thomas de Lellis  <tdel@windriver.com>
 886
 887         * arm-opc.h: Disassembly of thumb ldsb/ldsh
 888         instructions changed to ldrsb/ldrsh.
 889
 890 2000-05-11  Ulf Carlsson  <ulfc@engr.sgi.com>
 891
 892         * mips-dis.c (print_insn_arg): Don't mask top 32 bits of 64-bit
 893         target addresses for 'jal' and 'j'.
 894
 895 2000-05-10  Geoff Keating  <geoffk@redhat.com>
 896
 897         * ppc-opc.c (powerpc_opcodes): Make the predicted-branch opcodes
 898         also available in common mode when powerpc syntax is being used.
 899
 900 2000-05-08  Alan Modra  <alan@linuxcare.com.au>
 901
 902         * m68k-dis.c (dummy_printer): Add ATTRIBUTE_UNUSED to args.
 903         (dummy_print_address): Ditto.
 904
 905 2000-05-04  Timothy Wall  <twall@redhat.com>
 906
 907         * tic54x-opc.c: New.
 908         * tic54x-dis.c: New.
 909         * disassemble.c (disassembler): Add ARCH_tic54x.
 910         * configure.in: Added tic54x target.
 911         * configure: Ditto.
 912         * Makefile.am: Add tic54x dependencies.
 913         * Makefile.in: Ditto.
 914
 915 2000-05-03  J.T. Conklin  <jtc@redback.com>
 916
 917         * ppc-opc.c (VA, VB, VC, VD, VS, SIMM, UIMM, SHB): New macros, for
 918         vector unit operands.
 919         (VX, VX_MASK, VXA, VXA_MASK, VXR, VXR_MASK): New macros, for vector
 920         unit instruction formats.
 921         (PPCVEC): New macro, mask for vector instructions.
 922         (powerpc_operands): Add table entries for above operand types.
 923         (powerpc_opcodes): Add table entries for vector instructions.
 924
 925         * ppc-dis.c (print_insn_big_powerpc): Add PPC_OPCODE_ALTIVEC to mask.
 926         (print_insn_little_powerpc): Likewise.
 927         (print_insn_powerpc): Prepend 'v' when printing vector registers.
 928
 929 2000-04-24  Clinton Popetz  <cpopetz@redhat.com>
 930
 931         * configure.in: Add bfd_powerpc_64_arch.
 932         * disassemble.c (disassembler): Use print_insn_big_powerpc for
 933         64 bit code.
 934
 935 2000-04-24  Nick Clifton  <nickc@redhat.com>
 936
 937         * fr30-desc.c (fr30_cgen_cpu_open): Initialise signed_overflow
 938         field.
 939
 940 2000-04-23  Denis Chertykov  <denisc@overta.ru>
 941
 942         * avr-dis.c (reg_fmul_d): New. Extract destination register from
 943         FMUL instruction.
 944         (reg_fmul_r): New. Extract source register from FMUL instruction.
 945         (reg_muls_d): New. Extract destination register from MULS instruction.
 946         (reg_muls_r): New. Extract source register from MULS instruction.
 947         (reg_movw_d): New. Extract destination register from MOVW instruction.
 948         (reg_movw_r): New. Extract source register from MOVW instruction.
 949         (print_insn_avr): Handle MOVW, MULS, MULSU, FMUL, FMULS, FMULSU,
 950         EICALL, EIJMP, LPM r,Z, ELPM r,Z, SPM, ESPM instructions.
 951
 952 2000-04-22  Timothy Wall  <twall@redhat.com>
 953
 954         * ia64-gen.c (general): Add an ordered table of primary
 955         opcode names, as well as priority fields to disassembly data
 956         structures to enforce a preferred disassembly format based on the
 957         ordering of the opcode tables.
 958         (load_insn_classes): Show a useful message if IC tables are missing.
 959         (load_depfile): Ditto.
 960         * ia64-asmtab.h (struct ia64_dis_names ): Add priority flag to
 961         distinguish preferred disassembly.
 962         * ia64-opc-f.c: Reorder some insn for preferred disassembly
 963         format.  Fix incorrect flag on fma.s/fma.s.s0.
 964         * ia64-opc.c: Scan *all* disassembly matches and use the one with
 965         the highest priority.
 966         * ia64-opc-b.c: Use more abbreviations.
 967         * ia64-asmtab.c: Regenerate.
 968
 969 2000-04-21  Jason Eckhardt  <jle@redhat.com>
 970
 971         * hppa-dis.c (extract_16): New function.
 972         (print_insn_hppa): Fix incorrect handling of 'fe'. Added handling of
 973         new operand types l,y,&,fe,fE,fx.
 974
 975 2000-04-21  Richard Henderson  <rth@redhat.com>
 976             David Mosberger  <davidm@hpl.hp.com>
 977             Timothy Wall <twall@redhat.com>
 978             Bob Manson  <manson@charmed.cygnus.com>
 979             Jim Wilson  <wilson@redhat.com>
 980
 981         * Makefile.am (HFILES): Add ia64-asmtab.h, ia64-opc.h.
 982         (CFILES): Add ia64-dis.c, ia64-opc-a.c, ia64-opc-b.c, ia64-opc-f.c,
 983         ia64-opc-i.c, ia64-opc-m.c, ia64-opc-d.c, ia64-opc.c, ia64-gen.c,
 984         ia64-asmtab.c.
 985         (ALL_MACHINES): Add ia64-dis.lo, ia64-opc.lo.
 986         (ia64-ic.tbl, ia64-raw.tbl, ia64-waw.tbl, ia64-war.tbl, ia64-gen,
 987         ia64-gen.o, ia64-asmtab.c, ia64-dis.lo, ia64-opc.lo): New rules.
 988         * Makefile.in: Rebuild.
 989         * configure Rebuild.
 990         * configure.in (bfd_ia64_arch): New target.
 991         * disassemble.c (ARCH_ia64): Define.
 992         (disassembler): Support ARCH_ia64.
 993         * ia64-asmtab.c, ia64-asmtab.h, ia64-dis.c, ia64-gen.c ia64-ic.tbl,
 994         ia64-opc-a.c, ia64-opc-b.c, ia64-opc-d.c ia64-opc-f.c, ia64-opc-i.c,
 995         ia64-opc-m.c, ia64-opc-x.c, ia64-opc.c, ia64-opc.h, ia64-raw.tbl,
 996         ia64-war.tbl, ia64-waw.tbl: New files.
 997
 998 2000-04-20  Alexandre Oliva  <aoliva@redhat.com>
 999
1000         * m10300-dis.c (HAVE_AM30, HAVE_AM33): Define.
1001         (disassemble): Use them.
1002
1003 2000-04-14  Alan Modra  <alan@linuxcare.com.au>
1004
1005         * sysdep.h: Include "ansidecl.h" not <ansidecl.h>
1006         * Makefile.am: Update dependencies.
1007         * Makefile.in: Regenerate.
1008
1009 2000-04-14  Michael Sokolov  <msokolov@ivan.Harhan.ORG>
1010
1011         * a29k-dis.c, alpha-dis.c, alpha-opc.c, arc-dis.c, arc-opc.c,
1012         avr-dis.c, d10v-dis.c, d10v-opc.c, d30v-dis.c, d30v-opc.c,
1013         disassemble.c, h8300-dis.c, h8500-dis.c, hppa-dis.c, i370-dis.c,
1014         i370-opc.c, i960-dis.c, m10200-dis.c, m10200-opc.c, m10300-dis.c,
1015         m10300-opc.c, m68k-dis.c, m68k-opc.c, m88k-dis.c, mcore-dis.c,
1016         mips-dis.c, mips-opc.c, mips16-opc.c, pj-dis.c, pj-opc.c,
1017         ppc-dis.c, ppc-opc.c, sh-dis.c, sparc-dis.c, sparc-opc.c,
1018         tic80-dis.c, tic80-opc.c, v850-dis.c, v850-opc.c, vax-dis.c,
1019         w65-dis.c, z8k-dis.c, z8kgen.c: Include sysdep.h.  Remove
1020         ansidecl.h as sysdep.h includes it.
1021
1022 2000-04-7  Andrew Cagney  <cagney@b1.redhat.com>
1023
1024         * configure.in (WARN_CFLAGS): Set to -W -Wall by default.  Add
1025         --enable-build-warnings option.
1026         * Makefile.am (AM_CFLAGS, WARN_CFLAGS): Add definitions.
1027         * Makefile.in, configure: Re-generate.
1028
1029 2000-04-05  J"orn Rennecke <amylaar@redhat.com>
1030
1031         * sh-opc.h (sh_table): Use A_DISP_PC / PCRELIMM_8BY2 for ldre & ldrs.
1032         stc GBR,@-<REG_N> is available for arch_sh1_up.
1033         Group parallel processing insn with identical mnemonics together.
1034         Make three-operand psha / pshl come first.
1035
1036 2000-04-05  J"orn Rennecke <amylaar@redhat.co.uk>
1037
1038         * sh-opc.h (sh_nibble_type): Remove DISP_8 and DISP_4.
1039         Split IMM_[48]{,BY[24]} into IMM[01]_[48]{,BY[24]}.  Add REPEAT.
1040         (sh_arg_type): Add A_PC.
1041         (sh_table): Update entries using immediates.  Add repeat.
1042         * sh-dis.c (print_insn_shx): Remove DISP_8 and DISP_4.
1043         Split IMM_[48]{,BY[24]} into IMM[01]_[48]{,BY[24]}.  Add REPEAT.
1044
1045 2000-04-04  Alan Modra  <alan@linuxcare.com.au>
1046
1047         * po/opcodes.pot: Regenerate.
1048
1049         * Makefile.am (MKDEP): Use gcc -MM rather than mkdep.
1050         (DEP): Quote when passing vars to sub-make.  Add warning message
1051         to end.
1052         (DEP1): Rewrite for "gcc -MM".
1053         (CLEANFILES): Add DEP2.
1054         Update dependencies.
1055         * Makefile.in: Regenerate.
1056
1057 2000-04-03  Denis Chertykov  <denisc@overta.ru>
1058
1059         * avr-dis.c: Syntax cleanup.
1060         (add0fff): Print the pc relative address as a signed number.
1061         (add03f8): Likewise.
1062
1063 2000-04-01  Ian Lance Taylor  <ian@zembu.com>
1064
1065         * disassemble.c (disassembler_usage): Don't use a prototype.  Mark
1066         the parameter ATTRIBUTE_UNUSED.
1067         * ppc-opc.c: Add ATTRIBUTE_UNUSED as needed.
1068
1069 2000-04-01  Alexandre Oliva  <aoliva@redhat.com>
1070
1071         * m10300-opc.c: SP-based offsets are always unsigned.
1072
1073 2000-03-29  Thomas de Lellis  <tdel@windriver.com>
1074
1075         * arm-opc.h (thumb_opcodes): Disassemble 0xde.. to "bal"
1076         [branch always] instead of "undefined".
1077
1078 2000-03-27  Nick Clifton  <nickc@redhat.com>
1079
1080         * d30v-opc.c (d30v_format_table): Move SHORT_AR to end of list of
1081         short instructions, from end of list of long instructions.
1082
1083 2000-03-27  Ian Lance Taylor  <ian@zembu.com>
1084
1085         * Makefile.am (CFILES): Add avr-dis.c.
1086         (ALL_MACHINES): Add avr-dis.lo.
1087
1088 2000-03-27  Alan Modra  <alan@linuxcare.com>
1089
1090         * avr-dis.c (add0fff, add03f8): Don't use structure bitfields to
1091         truncate integers.
1092         (print_insn_avr): Call function via pointer in K&R compatible way.
1093         (dispLDD, regPP, reg50, reg104, reg40, reg20w, lit404, lit204,
1094         add0fff, add03f8): Convert to old style function declaration and
1095         add prototype.
1096         (avrdis_opcode): Add prototype.
1097
1098 2000-03-27  Denis Chertykov  <denisc@overta.ru>
1099
1100         * avr-dis.c: New file.  AVR disassembler.
1101         * configure.in (bfd_avr_arch): New architecture support.
1102         * disassemble.c: Likewise.
1103         * configure: Regenerate.
1104
1105 2000-03-06  J"oern Rennecke <amylaar@redhat.com>
1106
1107         * sh-opc.h (sh_table): ldre and ldrs have a *signed* displacement.
1108
1109 2000-03-02  J"orn Rennecke <amylaar@redhat.co.uk>
1110
1111         * d30v-dis.c (print_insn): Remove d*i hacks.  Use per-operand
1112         flag to determine if operand is pc-relative.
1113         * d30v-opc.c:
1114         (d30v_format_table):
1115         (REL6S3): Renamed from IMM6S3.
1116         Added flag OPERAND_PCREL.
1117         (REL12S3, REL18S3, REL32): Split from IMM12S3, IMM18S3, REL32, with
1118         added flag OPERAND_PCREL.
1119         (IMM12S3U): Replaced with REL12S3.
1120         (SHORT_D2, LONG_D): Delay target is pc-relative.
1121         (SHORT_B2r, SHORT_B3r, SHORT_B3br, SHORT_D2r, LONG_Ur, LONG_2r):
1122         Split from SHORT_B2, SHORT_D2, SHORT_B3b, SHORT_D2, LONG_U, LONG_2r,
1123         using the REL* operands.
1124         (LONG_2br, LONG_Dr): Likewise, from LONG_2b, LONG_D.
1125         (SHORT_D1r, SHORT_D2Br, LONG_Dbr): Renamed from SHORT_D1, SHORT_D2B,
1126         LONG_Db, using REL* operands.
1127         (SHORT_U, SHORT_A5S): Removed stray alternatives.
1128         (d30v_opcode_table): Use new *r formats.
1129
1130 2000-02-28  Nick Clifton  <nickc@redhat.com>
1131
1132         * m32r-desc.c (m32r_cgen_cpu_open): Replace 'flags' with
1133         'signed_overflow_ok_p'.
1134
1135 2000-02-27  Eli Zaretskii  <eliz@is.elta.co.il>
1136
1137         * Makefile.am (stamp-lib): Use $(LIBTOOL) --config to get the
1138         name of the libtool directory.
1139         * Makefile.in: Rebuild.
1140
1141 2000-02-24  Nick Clifton  <nickc@redhat.com>
1142
1143         * cgen-opc.c (cgen_set_signed_overflow_ok): New function.
1144         (cgen_clear_signed_overflow_ok): New function.
1145         (cgen_signed_overflow_ok_p): New function.
1146
1147 2000-02-23  Andrew Haley  <aph@redhat.com>
1148
1149         * m32r-asm.c, m32r-desc.c, m32r-desc.h, m32r-dis.c,
1150         m32r-ibld.c, m32r-opc.h: Rebuild.
1151
1152 2000-02-23  Linas Vepstas <linas@linas.org>
1153
1154         * i370-dis.c, i370-opc.c: New.
1155
1156         * disassemble.c (ARCH_i370): Define.
1157         (disassembler): Handle it.
1158
1159         * Makefile.am: Add support for Linux/IBM 370.
1160         * configure.in: Likewise.
1161
1162         * Makefile.in: Regenerate.
1163         * configure: Likewise.
1164
1165 2000-02-22  Chandra Chavva   <cchavva@redhat.com>
1166
1167         * d30v-opc.c (d30v_opcode_tab) : Added FLAG_NOT_WITH_ADDSUBppp to
1168         ST2H, STB, STH, STHH, STW and ST2H opcodes to prohibit parallel
1169         procedure.
1170
1171 2000-02-22  Andrew Haley  <aph@redhat.com>
1172
1173         * mips-dis.c (_print_insn_mips): New arg for OPCODE_IS_MEMBER:
1174         force gp32 to zero.
1175         * mips-opc.c (G6): New define.
1176         (mips_builtin_op): Add "move" definition for -gp32.
1177
1178 2000-02-22  Ian Lance Taylor  <ian@zembu.com>
1179
1180         From Grant Erickson <gerickso@Brocade.COM>:
1181         * ppc-opc.c: Correct dcread--it takes 3 arguments, not 2.
1182
1183 2000-02-21  Alan Modra  <alan@spri.levels.unisa.edu.au>
1184
1185         * dis-buf.c (buffer_read_memory): Change `length' param and all int
1186         vars to unsigned.
1187
1188 2000-02-17 J"orn Rennecke <amylaar@redhat.co.uk>
1189
1190         * sh-dis.c (print_movxy, print_insn_ddt, print_dsp_reg): New functions.
1191         (print_insn_ppi): Likewise.
1192         (print_insn_shx): Use info->mach to select appropriate insn set.
1193         Add support for sh-dsp.  Remove FD_REG_N support.
1194         * sh-opc.h (sh_nibble_type): Add new values for sh-dsp support.
1195         (sh_arg_type): Likewise.  Remove FD_REG_N.
1196         (sh_dsp_reg_nums): New enum.
1197         (arch_sh1, arch_sh2, arch_sh3, arch_sh3e, arch_sh4): New macros.
1198         (arch_sh_dsp, arch_sh3_dsp, arch_sh1_up, arch_sh2_up): Likewise.
1199         (arch_sh3_up, arch_sh3e_up, arch_sh4_up, arch_sh_dsp_up): Likewise.
1200         (arch_sh3_dsp_up): Likewise.
1201         (sh_opcode_info): New field: arch.
1202         (sh_table): Split up insn with FD_REG_N into ones with F_REG_N and
1203         D_REG_N.  Fill in arch field.  Add sh-dsp insns.
1204
1205 2000-02-14  Fernando Nasser  <fnasser@totem.to.redhat.com>
1206
1207         * arm-dis.c: Change flavor name from atpcs-special to
1208         special-atpcs to prevent name conflict in gdb.
1209         (get_arm_regname_num_options, set_arm_regname_option,
1210         get_arm_regnames): New functions.  API to access the several
1211         flavor of register names.  Note: Used by gdb.
1212         (print_insn_thumb): Use the register name entry from the currently
1213         selected flavor for LR and PC.
1214
1215 2000-02-10  Nick Clifton  <nickc@redhat.com>
1216
1217         * mcore-opc.h (enum mcore_opclass): Add MULSH and OPSR
1218         classes.
1219         (mcore_table): Add "idly4", "psrclr", "psrset", "mulsh" and
1220         "mulsh.h" instructions.
1221         * mcore-dis.c (imsk array): Add masks for MULSH and OPSR
1222         classes.
1223         (print_insn_mcore): Add support for little endian targets.
1224         Add support for MULSH and OPSR classes.
1225
1226 2000-02-07  Nick Clifton  <nickc@redhat.com>
1227
1228         * arm-dis.c (parse_arm_diassembler_option): Rename again.
1229         Previous delat did not take.
1230
1231 2000-02-03  Timothy Wall  <twall@redhat.com>
1232
1233         * dis-buf.c (buffer_read_memory):  Use octets_per_byte field
1234         to adjust target address bounds checking and calculate the
1235         appropriate octet offset into data.
1236
1237 2000-01-27  Nick Clifton  <nickc@redhat.com>
1238
1239         * arm-dis.c: (parse_disassembler_option): Rename to
1240         parse_arm_disassembler_option and allow to be exported.
1241
1242         * disassemble.c (disassembler_usage): New function: Print out any
1243         target specific disassembler options.
1244         Call arm_disassembler_options() if the ARM architecture is being
1245         supported.
1246
1247         * arm-dis.c (NUM_ELEM): Define this macro if not already
1248         defined.
1249         (arm_regname): New struct type for ARM register names.
1250         (arm_toggle_regnames): Delete.
1251         (parse_disassembler_option): Use register name structure.
1252         (print_insn): New function: Combines duplicate code found in
1253         print_insn_big_arm and print_insn_little_arm.
1254         (print_insn_big_arm): Call print_insn.
1255         (print_insn_little_arm): Call print_insn.
1256         (print_arm_disassembler_options): Display list of supported,
1257         ARM specific disassembler options.
1258
1259 2000-01-27  Thomas de Lellis  <tdel@windriver.com>
1260
1261         * arm-dis.c (printf_insn_big_arm): Treat ELF symbols with the
1262         ARM_STT_16BIT flag as Thumb code symbols.
1263
1264         * arm-dis.c (printf_insn_little_arm): Ditto.
1265
1266 2000-01-25  Thomas de Lellis  <tdel@windriver.com>
1267
1268         * arm-dis.c (printf_insn_thumb): Prevent double dumping
1269         of raw thumb instructions.
1270
1271 2000-01-20  Nick Clifton  <nickc@redhat.com>
1272
1273         * mcore-opc.h (mcore_table): Add "add" as an alias for "addu".
1274
1275 2000-01-03  Nick Clifton  <nickc@cygnus.com>
1276
1277         * arm-dis.c (streq): New macro.
1278         (strneq): New macro.
1279         (force_thumb): ew local variable.
1280         (parse_disassembler_option): New function: Parse a single, ARM
1281         specific disassembler command line switch.
1282         (parse_disassembler_option): Call parse_disassembler_option to
1283         parse individual command line switches.
1284         (print_insn_big_arm): Check force_thumb.
1285         (print_insn_little_arm): Check force_thumb.
1286
1287 For older changes see ChangeLog-9899
1288 \f
1289 Local Variables:
1290 mode: change-log
1291 left-margin: 8
1292 fill-column: 74
1293 version-control: never
1294 End: