2 Fri Aug 23 00:27:01 1996 Jeffrey A Law (law@cygnus.com)
4 * v850-opc.c (v850_opcodes): Correct bit pattern for setf.
6 * v850-opc.c (v850_operands): D16 inserts at offset 16!
8 * v850-opc.c (two): Get order of words correct.
10 * v850-opc.c (v850_operands): I16 inserts at offset 16!
12 * v850-opc.c (v850_operands): Add "SR1" and "SR2" for system
13 register source and destination operands.
14 (v850_opcodes): Use SR1 and SR2 for "ldsr" and "stsr".
16 * v850-opc.c (v850_opcodes): Fix thinko in "jmp" opcode. Fix
17 same thinko in "trap" opcode.
19 * v850-opc.c (v850_opcodes): Add initializer for size field
22 * v850-opc.c (v850_operands): D6 -> DS7. References changed.
23 Add D8 for 8-bit unsigned field in short load/store insns.
24 (IF4A, IF4D): These both need two registers.
25 (IF4C, IF4D): Define. Use 8-bit unsigned field.
26 (v850_opcodes): For "sld.h", "sld.w", "sst.h", "sst.w", use
27 IF4C & IF4D. For "trap" use I5U, not I5. Add IF1 operand
28 for "ldsr" and "stsr".
29 * v850-opc.c (v850_operands): 3-bit immediate for bit insns
32 * v850-opc.c (v850_opcodes): Correct short store half (sst.h) and
33 short store word (sst.w).
35 Thu Aug 22 16:57:27 1996 J.T. Conklin <jtc@rtl.cygnus.com>
37 * v850-opc.c (v850_operands): Added insert and extract fields,
38 pointers to functions that handle unusual operand encodings.
40 Thu Aug 22 01:05:24 1996 Jeffrey A Law (law@cygnus.com)
42 * v850-opc.c (v850_opcodes): Enable "trap".
44 * v850-opc.c (v850_opcodes): Fix order of displacement
45 and register for "set1", "clr1", "not1", and "tst1".
47 Wed Aug 21 18:46:26 1996 Jeffrey A Law (law@cygnus.com)
49 * v850-opc.c (v850_operands): Add "B3" support.
50 (v850_opcodes): Fix and enable "set1", "clr1", "not1"
53 * v850-opc.c (v850_opcodes): "jmp" has only an R1 operand.
55 * v850-opc.c: Close unterminated comment.
57 Wed Aug 21 17:31:26 1996 J.T. Conklin <jtc@hippo.cygnus.com>
59 * v850-opc.c (v850_operands): Add flags field.
60 (v850_opcodes): add move opcodes.
62 Tue Aug 20 14:41:03 1996 J.T. Conklin <jtc@hippo.cygnus.com>
64 * Makefile.in (ALL_MACHINES): Add v850-opc.o.
65 * configure: (bfd_v850v_arch) Add new case.
66 * configure.in: (bfd_v850_arch) Add new case.
67 * v850-opc.c: New file.
70 Mon Aug 19 15:21:38 1996 Doug Evans <dje@canuck.cygnus.com>
72 * sparc-dis.c (print_insn_sparc): Handle little endian sparcs.
75 Thu Aug 15 13:14:43 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
77 * d10v-opc.c: Add additional information to the opcode
78 table to help determinine which instructions can be done
82 Thu Aug 15 13:11:13 1996 Stan Shebs <shebs@andros.cygnus.com>
84 * mpw-make.sed: Update editing of include pathnames to be
87 Thu Aug 15 16:28:41 1996 James G. Smith <jsmith@cygnus.co.uk>
89 * arm-opc.h: Added "bx" instruction definition.
91 Wed Aug 14 17:00:04 1996 Richard Henderson <rth@tamu.edu>
93 * alpha-opc.c (EV4EXTHWINDEX): Field width should be 8 not 5.
96 Mon Aug 12 14:30:37 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
98 * d10v-opc.c (d10v_opcodes): Minor fixes to addi and bl.l.
100 Fri Aug 9 13:21:59 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
102 * d10v-opc.c (d10v_opcodes): Correct 'mv' unit entry to EITHER.
105 Thu Aug 8 12:43:52 1996 Klaus Kaempf <kkaempf@progis.de>
107 * makefile.vms: Update for alpha-opc changes.
109 Wed Aug 7 11:55:10 1996 Ian Lance Taylor <ian@cygnus.com>
111 * i386-dis.c (print_insn_i386): Actually return the correct value.
112 (ONE, OP_ONE): #ifdef out; not used.
115 Fri Aug 2 17:47:03 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
117 * d10v-opc.c (d10v_opcodes): Added 2 accumulator sub instructions.
118 Changed subi operand type to treat 0 as 16.
121 Wed Jul 31 16:21:41 1996 Ian Lance Taylor <ian@cygnus.com>
123 * m68k-opc.c: Add cpushl for the mcf5200. From Ken Rose
126 Wed Jul 31 14:39:27 1996 James G. Smith <jsmith@cygnus.co.uk>
128 * arm-opc.h: (arm_opcodes): Added halfword and sign-extension
129 memory transfer instructions. Add new format string entries %h and %s.
130 * arm-dis.c: (print_insn_arm): Provide decoding of the new
134 Fri Jul 26 11:45:04 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
136 * d10v-opc.c (d10v_operands): Added UNUM4S; a 4-bit accumulator shift.
137 (d10v_opcodes): Modified accumulator shift instructions to use UNUM4S.
140 Fri Jul 26 14:01:43 1996 Ian Lance Taylor <ian@cygnus.com>
142 * alpha-dis.c (print_insn_alpha_osf): Remove.
143 (print_insn_alpha_vms): Remove.
144 (print_insn_alpha): Make globally visible. Chose the register
145 names based on info->flavour.
146 * disassemble.c: Always return print_insn_alpha for the alpha.
149 Thu Jul 25 15:24:17 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
151 * d10v-dis.c (dis_long): Handle unknown opcodes.
153 Thu Jul 25 12:08:09 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
155 * d10v-opc.c: Changes to support signed and unsigned numbers.
156 All instructions with the same name that have long and short forms
157 now end in ".l" or ".s". Divs added.
158 * d10v-dis.c: Changes to support signed and unsigned numbers.
160 Tue Jul 23 11:02:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
162 * d10v-dis.c: Change all functions to use info->print_address_func.
165 Mon Jul 22 15:38:53 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
167 * m68k-opc.c (m68k_opcodes): Make opcode masks for the ColdFire
168 move ccr/sr insns more strict so that the disassembler only
169 selects them when the addressing mode is data register.
172 Mon Jul 22 11:25:24 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
173 * d10v-opc.c (pre_defined_registers): Declare.
174 * d10v-dis.c (print_operand): Now uses pre_defined_registers
175 to pick a better name for the registers.
178 Mon Jul 22 13:47:23 1996 Ian Lance Taylor <ian@cygnus.com>
180 * sparc-opc.c: Fix opcode values for fpack16, and fpackfix. Fix
181 operands for fexpand and fpmerge. From Christian Kuehnke
182 <Christian.Kuehnke@arbi.informatik.uni-oldenburg.de>.
184 Mon Jul 22 13:17:06 1996 Richard Henderson <rth@tamu.edu>
186 * alpha-dis.c (print_insn_alpha): No longer the user-visible
187 print routine. Take new regnames and cpumask arguments.
188 Kill the environment variable nonsense.
189 (print_insn_alpha_osf): New function. Do OSF/1 style regnames.
190 (print_insn_alpha_vms): New function. Do VMS style regnames.
191 * disassemble.c (disassembler): Test bfd flavour to pick
192 between OSF and VMS routines. Default to OSF.
194 Thu Jul 18 17:19:34 1996 Ian Lance Taylor <ian@cygnus.com>
196 * configure.in: Call AC_SUBST (INSTALL_SHLIB).
197 * configure: Rebuild.
198 * Makefile.in (install): Use @INSTALL_SHLIB@.
201 Wed Jul 17 14:39:05 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
203 * configure: (bfd_d10v_arch) Add new case.
204 * configure.in: (bfd_d10v_arch) Add new case.
205 * d10v-dis.c: New file.
206 * d10v-opc.c: New file.
207 * disassemble.c (disassembler) Add entry for d10v.
210 Wed Jul 17 10:12:05 1996 J.T. Conklin <jtc@rtl.cygnus.com>
212 * m68k-opc.c (m68k_opcodes): Fix bugs in coldfire insns relating
213 to bcc, trapfl, subxl, and wddata discovered by Andreas Schwab.
215 Mon Jul 15 16:59:55 1996 Stu Grossman (grossman@critters.cygnus.com)
217 * i386-dis.c: Get rid of print_insn_i8086. Use info.mach to
218 distinguish between variants of the instruction set.
219 * sparc-dis.c: Get rid of print_insn_sparclite. Use info.mach to
220 distinguish between variants of the instruction set.
222 Fri Jul 12 10:12:01 1996 Stu Grossman (grossman@critters.cygnus.com)
224 * i386-dis.c (print_insn_i8086): New routine to disassemble using
225 the 8086 instruction set.
226 * i386-dis.c: General cleanups. Make most things static. Add
227 prototypes. Get rid of static variables aflags and dflags. Pass
228 them as args (to almost everything).
230 Thu Jul 11 11:58:44 1996 Jeffrey A Law (law@cygnus.com)
232 * h8300-dis.c (bfd_h8_disassemble): Handle macregs in ldmac insns.
234 * h8300-dis.c (bfd_h8_disassemble): Handle "ldm.l" and "stm.l".
236 * h8300-dis.c (bfd_h8_disassemble): "abs" is implicitly two
237 if the next arg is marked with SRC_IN_DST. Gross.
239 * h8300-dis.c (bfd_h8_disassemble): Print "exr" when
240 we're looking for and find EXR.
242 * h8300-dis.c (bfd_h8_disassemble): We don't have a match
243 if we're looking for KBIT and we don't find it.
245 * h8300-dis.c (bfd_h8_disassemble): Mask off unwanted bits
248 * h8300-dis.c (bfd_h8_disassemble): Don't set plen for
249 3bit immediate operands.
251 Tue Jul 9 10:55:20 1996 Ian Lance Taylor <ian@cygnus.com>
253 * Released binutils 2.7.
255 * alpha-opc.c: Add new case of "mov". From Klaus Kaempf
256 <kkaempf@progis.ac-net.de>.
258 Thu Jul 4 11:42:51 1996 Ian Lance Taylor <ian@cygnus.com>
260 * alpha-opc.c: Correct second case of "mov" to use OPRL.
262 Wed Jul 3 16:03:47 1996 Stu Grossman (grossman@critters.cygnus.com)
264 * sparc-dis.c (print_insn_sparclite): New routine to print
265 sparclite instructions.
267 Wed Jul 3 14:21:18 1996 J.T. Conklin <jtc@rtl.cygnus.com>
269 * m68k-opc.c (m68k_opcodes): Add coldfire support.
271 Fri Jun 28 15:53:51 1996 Doug Evans <dje@canuck.cygnus.com>
273 * sparc-opc.c (asi_table): Add #ASI_N, #ASI_N_L, #ASI_NUCLEUS,
274 #ASI_NUCLEUS_LITTLE. Rename #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_L
275 to #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_LITTLE.
277 Tue Jun 25 22:58:31 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
279 * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir):
280 Use autoconf-set values.
281 (docdir, oldincludedir): Removed.
282 * configure.in (AC_PREREQ): autoconf 2.5 or higher.
284 Fri Jun 21 13:53:36 1996 Richard Henderson <rth@tamu.edu>
286 * alpha-opc.c: New file.
287 * alpha-opc.h: Remove.
288 * alpha-dis.c: Complete rewrite to use new opcode table.
289 * configure.in: For bfd_alpha_arch, use alpha-opc.o.
290 * configure: Rebuild with autoconf 2.10.
291 * Makefile.in (ALL_MACHINES): Add alpha-opc.o.
292 (alpha-dis.o): Depend upon $(INCDIR)/opcode/alpha.h, not
294 (alpha-opc.o): New target.
296 Wed Jun 19 15:55:12 1996 Ian Lance Taylor <ian@cygnus.com>
298 * sparc-dis.c (print_insn_sparc): Remove unused local variable i.
299 Set imm_added_to_rs1 even if the source and destination register
302 * sparc-opc.c: Add some two operand forms of the wr instruction.
304 Tue Jun 18 15:58:27 1996 Jeffrey A. Law <law@rtl.cygnus.com>
306 * h8300-dis.c (bfd_h8_disassemble): Rename "hmode" argument
309 * disassemble.c (disassembler): Handle H8/S.
310 * h8300-dis.c (print_insn_h8300s): New function for H8/S.
312 Tue Jun 18 18:06:50 1996 Ian Lance Taylor <ian@cygnus.com>
314 * sparc-opc.c: Add beq/teq as aliases for be/te.
316 * ppc-opc.c: Fix fcmpo opcode. From Sergei Steshenko
317 <sergei@msil.sps.mot.com>.
319 Tue Jun 18 15:08:54 1996 Klaus Kaempf <kkaempf@progis.de>
321 * makefile.vms: New file.
323 * alpha-dis.c (print_insn_alpha): Print lda ra,lit(rz) as mov.
325 Mon Jun 10 18:50:38 1996 Ian Lance Taylor <ian@cygnus.com>
327 * h8300-dis.c (bfd_h8_disassemble): Always print ABS8MEM with :8,
330 Tue Jun 4 09:15:53 1996 Doug Evans <dje@canuck.cygnus.com>
332 * i386-dis.c (OP_OFF): Call append_prefix.
334 Thu May 23 15:18:23 1996 Michael Meissner <meissner@tiktok.cygnus.com>
336 * ppc-opc.c (instruction encoding macros): Add explicit casts to
337 unsigned long to silence a warning from the Solaris PowerPC
340 Thu Apr 25 19:33:32 1996 Doug Evans <dje@canuck.cygnus.com>
342 * sparc-opc.c (sparc_opcodes): Add ultrasparc vis extensions.
344 Mon Apr 22 17:12:35 1996 Doug Evans <dje@blues.cygnus.com>
346 * sparc-dis.c (X_IMM,X_SIMM): New macros.
348 (print_insn_sparc): Merge cases i,I,j together. New cases X,Y.
349 * sparc-opc.c (sparc_opcodes): Use X for 5 bit shift constants,
350 Y for 6 bit shift constants. Rewrite entries for crdcxt, cwrcxt,
351 cpush, cpusha, cpull sparclet insns.
353 Wed Apr 17 14:20:22 1996 Doug Evans <dje@canuck.cygnus.com>
355 * sparc-dis.c (compute_arch_mask): Replace ANSI style def with K&R.
357 Thu Apr 11 17:30:02 1996 Ian Lance Taylor <ian@cygnus.com>
359 * sparc-opc.c: Set F_FBR on floating point branch instructions.
360 Set F_FLOAT on other floating point instructions.
362 Mon Apr 8 17:02:48 1996 Michael Meissner <meissner@tiktok.cygnus.com>
364 * ppc-opc.c (PPC860): Macro for 860/821 specific instructions and
366 (powerpc_opcodes): Add 860/821 specific SPRs.
368 Mon Apr 8 14:00:44 1996 Ian Lance Taylor <ian@cygnus.com>
370 * configure.in: Permit --enable-shared to specify a list of
371 directories. Set and substitute BFD_PICLIST.
372 * configure: Rebuild.
373 * Makefile.in (BFD_PICLIST): Rename from BFD_LIST. Change all
374 uses. Set to @BFD_PICLIST@.
376 Fri Apr 5 17:12:27 1996 Jeffrey A Law (law@cygnus.com)
378 * h8300-dis.c (bfd_h8_disassemble): Use "bit" for L_3 immediates,
379 not "abs", which may be needed for the absolute in something
380 like btst #0,@10:8. Print L_3 immediates separately from other
381 immediates. Change ABSMOV reference to ABS8MEM.
383 Wed Apr 3 10:40:45 1996 Doug Evans <dje@canuck.cygnus.com>
385 * sparc-dis.c (opcodes_initialized): Move inside print_insn_sparc.
386 (current_arch_mask): New static global.
387 (compute_arch_mask): New static function.
388 (print_insn_sparc): Delete sparc_v9_p. New static local
389 current_mach. Resort opcode table if current_mach changes.
390 Generalize "insn not supported" test.
391 (compare_opcodes): Prefer supported opcodes to nonsupported ones.
392 Delete test for v9/!v9.
393 * sparc-opc.c (MASK_*): Use SPARC_OPCODE_ARCH_MASK.
395 (brfc): Split into CBR and FBR for coprocessor/fp branches.
396 (brfcx): Renamed to FBRX.
397 (condfc): Renamed to CONDFC. Pass v6notlet to CBR (standard
398 coprocessor mnemonics are not supported on the sparclet).
399 (condf): Renamed to CONDF.
400 (SLCBCC2): Delete F_ALIAS flag.
402 Sat Mar 30 21:45:59 1996 Doug Evans <dje@canuck.cygnus.com>
404 * sparc-opc.c (sparc_opcodes): rd must be 0 for
405 mov foo,{%y,%psr,%wim,%tbr}. Support mov foo,%asrX.
407 Fri Mar 29 13:02:40 1996 Ian Lance Taylor <ian@cygnus.com>
409 * Makefile.in (config.status): Depend upon BFD VERSION file, so
410 that the shared library version number is set correctly.
412 Tue Mar 26 15:47:14 1996 Ian Lance Taylor <ian@cygnus.com>
414 * configure.in: Use AC_CHECK_TOOL to find ar and ranlib. From
415 Miles Bader <miles@gnu.ai.mit.edu>.
416 * configure: Rebuild.
418 Sat Mar 16 13:04:07 1996 Fred Fish <fnf@cygnus.com>
420 * z8kgen.c (internal, gas): Call xmalloc rather than unchecked
423 Tue Mar 12 12:14:10 1996 Ian Lance Taylor <ian@cygnus.com>
425 * configure: Rebuild with autoconf 2.8.
427 Thu Mar 7 15:11:10 1996 Doug Evans <dje@charmed.cygnus.com>
429 * sparc-dis.c (print_insn_sparc): Handle 'O' operand char like 'r'.
430 * sparc-opc.c (sparc_opcodes): Use 'O' operand char for `neg reg'.
432 Tue Mar 5 15:51:57 1996 Ian Lance Taylor <ian@cygnus.com>
434 * configure.in: Don't set SHLIB or SHLINK to an empty string,
435 since they appear as targets in Makefile.in.
436 * configure: Rebuild.
438 Mon Feb 26 13:03:40 1996 Stan Shebs <shebs@andros.cygnus.com>
440 * mpw-make.sed: Edit out shared library support bits.
442 Tue Feb 20 20:48:28 1996 Doug Evans <dje@charmed.cygnus.com>
444 * sparc-opc.c (v8,v6notv9): Add MASK_SPARCLET.
445 (sparc_opcode_archs): Add MASK_V8 to sparclet entry.
446 (sparc_opcodes): Add sparclet insns.
447 (sparclet_cpreg_table): New static local.
448 (sparc_{encode,decode}_sparclet_cpreg): New functions.
449 * sparc-dis.c (print_insn_sparc): Handle sparclet cpregs.
451 Tue Feb 20 11:02:44 1996 Alan Modra <alan@mullet.Levels.UniSA.Edu.Au>
453 * i386-dis.c (index16): New static variable.
454 (putop): Print jecxz for 32 bit case, jcxz for 16 bit, not the
456 (OP_indirE): Return result of OP_E.
457 (OP_E): Check for 16 bit addressing mode, and disassemble
458 correctly. Optimised 32 bit case a little. Don't print
459 "(base,index,scale)" when sib specifies only an offset.
461 Mon Feb 19 12:32:17 1996 Ian Lance Taylor <ian@cygnus.com>
463 * configure.in: Set and substitute SHLIB_DEP.
464 * configure: Rebuild.
465 * Makefile.in (SHLIB_DEP): New variable.
466 (LIBIBERTY_LISTS, BFD_LIST): New variables.
467 (stamp-piclist): Depend upon LIBIBERTY_LISTS and BFD_LIST. If
468 COMMON_SHLIB, add them to piclist with appropriate modifications.
469 ($(SHLIB)): Depend upon $(SHLIB_DEP). Don't check COMMON_SHLIB
470 here: just use piclist.
472 Mon Feb 19 02:03:50 1996 Doug Evans <dje@charmed.cygnus.com>
474 * sparc-dis.c (MASK_V9,V9_ONLY_P,V9_P): Define.
475 (print_insn_sparc): Rewrite v9/not-v9 tests.
476 (compare_opcodes): Likewise.
477 * sparc-opc.c (MASK_<ARCH>): Define.
478 (v6,v7,v8,sparclite,v9,v9a): Redefine.
479 (sparclet,v6notv9): Define.
480 (sparc_opcode_archs): Delete member `conflicts'. Add `supported'.
481 (sparc_opcodes): Delete F_NOTV9, use v6notv9 instead.
483 Thu Feb 15 14:45:05 1996 Ian Lance Taylor <ian@cygnus.com>
485 * configure.in: Call AC_PROG_CC before configure.host.
486 * configure: Rebuild.
488 * Makefile.in (SONAME): Remove leading ../bfd/ from $(SHLIB).
490 Wed Feb 14 19:01:27 1996 Alan Modra <alan@spri.levels.unisa.edu.au>
492 * i386-dis.c (onebyte_has_modrm): New static array.
493 (twobyte_has_modrm): New static array.
494 (print_insn_i386): Only fetch the mod/reg/rm byte if it is needed.
496 Tue Feb 13 15:15:01 1996 Ian Lance Taylor <ian@cygnus.com>
498 * Makefile.in ($(SHLINK)): Check ts against $(SHLIB), not
501 Mon Feb 12 16:26:06 1996 Michael Meissner <meissner@tiktok.cygnus.com>
503 * ppc-opc.c (PPC): Undef, so default defination on Windows NT
506 Wed Feb 7 13:59:54 1996 Ian Lance Taylor <ian@cygnus.com>
508 * m68k-opc.c (m68k_opcodes): The bkpt instruction is supported on
509 m68010up, not just m68020up | cpu32.
511 * Makefile.in (SONAME): New variable.
512 ($(SHLINK)): Make a link to the transformed name, as well.
513 (stamp-tshlink): New target.
514 (install): Skip stamp-tshlink during install.
516 Tue Feb 6 12:28:54 1996 Ian Lance Taylor <ian@cygnus.com>
518 * configure.in: Call AC_ARG_PROGRAM.
519 * configure: Rebuild.
520 * Makefile.in (program_transform_name): New variable.
521 (install): Transform library name before installing it.
523 Mon Feb 5 16:14:42 1996 Ian Lance Taylor <ian@cygnus.com>
525 * i960-dis.c (mem): Add HX dcinva instruction.
527 Support for building as a shared library, based on patches from
528 Alan Modra <alan@spri.levels.unisa.edu.au>:
529 * configure.in: Add AC_ARG_ENABLE for shared and commonbfdlib.
530 New substitutions: ALLLIBS, PICFLAG, SHLIB, SHLIB_CC,
531 SHLIB_CFLAGS, COMMON_SHLIB, SHLINK.
532 * configure: Rebuild.
533 * Makefile.in (ALLLIBS): New variable.
534 (PICFLAG, SHLIB, SHLIB_CC, SHLIB_CFLAGS): New variables.
535 (COMMON_SHLIB, SHLINK): New variables.
536 (.c.o): If PICFLAG is set, compile twice, once PIC, once normal.
537 (STAGESTUFF): Remove variable.
538 (all): Depend upon $(ALLLIBS) rather than $(TARGETLIB).
539 (stamp-piclist, piclist): New targets.
540 ($(SHLIB), $(SHLINK)): New targets.
541 ($(OFILES)): Depend upon stamp-picdir.
542 (disassemble.o): Build twice if PICFLAG is set.
543 (MOSTLYCLEAN): Add pic/*.o.
544 (clean): Remove $(SHLIB), $(SHLINK), piclist, and stamp-piclist.
545 (distclean): Remove pic and stamp-picdir.
546 (install): Install shared libraries.
547 (stamp-picdir): New target.
549 Fri Feb 2 17:15:25 1996 Doug Evans <dje@charmed.cygnus.com>
551 * sparc-dis.c (print_insn_sparc): Delete DISASM_RAW_INSN support.
552 Print unknown instruction as "unknown", rather than in hex.
554 Tue Jan 30 14:06:08 1996 Ian Lance Taylor <ian@cygnus.com>
556 * dis-buf.c: Include "sysdep.h" before "dis-asm.h".
558 Thu Jan 25 20:24:07 1996 Doug Evans <dje@charmed.cygnus.com>
560 * sparc-opc.c (sparc_opcode_archs): Mark v8/sparclite as conflicting.
562 Thu Jan 25 11:56:49 1996 Ian Lance Taylor <ian@cygnus.com>
564 * i386-dis.c (print_insn_i386): Only fetch the mod/reg/rm byte
565 when necessary. From Ulrich Drepper
566 <drepper@myware.rz.uni-karlsruhe.de>.
568 Thu Jan 25 03:39:10 1996 Doug Evans <dje@charmed.cygnus.com>
570 * sparc-dis.c (print_insn_sparc): NUMOPCODES replaced with
571 sparc_num_opcodes. Update architecture enum values.
572 * sparc-opc.c (sparc_opcode_archs): Replaces architecture_pname.
573 (sparc_opcode_lookup_arch): New function.
574 (sparc_num_opcodes): Renamed from bfd_sparc_num_opcodes.
575 (sparc_opcodes): Add v9a shutdown insn.
577 Mon Jan 22 08:29:59 1996 Doug Evans <dje@charmed.cygnus.com>
579 * sparc-dis.c (print_insn_sparc): Renamed from print_insn.
580 If DISASM_RAW_INSN, print insn in hex. Handle v9a as opcode
582 (print_insn_sparc64): Deleted.
583 * disassemble.c (disassembler, case bfd_arch_sparc): Always use
586 * sparc-opc.c (architecture_pname): Add v9a.
588 Fri Jan 12 14:35:58 1996 David Mosberger-Tang <davidm@AZStarNet.com>
590 * alpha-opc.h (alpha_insn_set): VAX floating point opcode was
591 incorrectly defined as 0x16 when it should be 0x15.
592 (FLOAT_FORMAT_MASK): function code is 11 bits, not just 7 bits!
593 (alpha_insn_set): added cvtst and cvttq float ops. Also added
594 excb (exception barrier) which is defined in the Alpha
595 Architecture Handbook version 2.
596 * alpha-dis.c (print_insn_alpha): Fixed special-case decoding for
597 OPERATE_FORMAT_CODE type instructions. The bug caused mulq to be
598 disassembled as or, for example.
600 Wed Jan 10 12:37:22 1996 Ian Lance Taylor <ian@cygnus.com>
602 * mips-dis.c (print_insn_arg): Print cases 'i' and 'u' in hex.
603 (_print_insn_mips): Change i from int to unsigned int.
605 Thu Jan 4 17:21:10 1996 David Edelsohn <edelsohn@mhpcc.edu>
607 * ppc-opc.c (powerpc_opcodes): tlbi POWER opcode form different
608 from tlbie PowerPC opcode. Add PPC603 tlbld and tlbli.
610 Thu Dec 28 13:29:19 1995 John Hassey <hassey@rtp.dg.com>
612 * i386-dis.c: Added Pentium Pro instructions.
614 Tue Dec 19 22:56:35 1995 Michael Meissner <meissner@tiktok.cygnus.com>
616 * ppc-opc.c (fsqrt{,.}): Duplicate for PowerPC in addition to
619 Fri Dec 15 14:14:15 1995 J.T. Conklin <jtc@rtl.cygnus.com>
621 * sh-opc.h (sh_nibble_type): Added REG_B.
622 (sh_arg_type): Added A_REG_B.
623 (sh_table): Added pref and bank reg versions of ldc, ldc.l, stc
625 * sh-dis.c (print_insn_shx): Added cases for REG_B and A_REG_B.
627 Fri Dec 15 16:44:31 1995 Ian Lance Taylor <ian@cygnus.com>
629 * disassemble.c (disassembler): Use new bfd_big_endian macro.
631 Tue Dec 12 12:22:24 1995 Ian Lance Taylor <ian@cygnus.com>
633 * Makefile.in (distclean): Remove stamp-h. From Ronald
634 F. Guilmette <rfg@monkeys.com>.
636 Tue Dec 5 13:42:44 1995 Stan Shebs <shebs@andros.cygnus.com>
638 From David Mosberger-Tang <davidm@azstarnet.com>:
639 * alpha-dis.c (print_insn_alpha): fixed decoding of cpys
642 Mon Dec 4 12:29:05 1995 J.T. Conklin <jtc@rtl.cygnus.com>
644 * sh-opc.h (sh_arg_type): Added A_SSR and A_SPC.
645 (sh_table): Added many SH3 opcodes.
646 * sh-dis.c (print_insn_shx): Added cases for A_SSR and A_SPC.
648 Fri Dec 1 07:42:18 1995 Michael Meissner <meissner@tiktok.cygnus.com>
650 * ppc-opc.c (subfc., subfco): Mark this PPCCOM, not PPC.
651 (subco,subco.): Mark this PPC, not PPCCOM.
653 Mon Nov 27 13:09:52 1995 Ian Lance Taylor <ian@cygnus.com>
655 * configure: Rebuild with autoconf 2.7.
657 Tue Nov 21 18:28:06 1995 Ian Lance Taylor <ian@cygnus.com>
659 * configure: Rebuild with autoconf 2.6.
661 Wed Nov 15 19:02:53 1995 Ken Raeburn <raeburn@cygnus.com>
663 * configure.in: Sort list of architectures. Accept but do nothing
664 for alliant, convex, pyramid, romp, and tahoe.
666 Wed Nov 8 20:18:59 1995 Ian Lance Taylor <ian@cygnus.com>
668 * a29k-dis.c (print_special): Change num to unsigned int.
670 Wed Nov 8 20:10:35 1995 Eric Freudenthal <freudenthal@nyu.edu>
672 * a29k-dis.c (print_insn): Cast insn24 to unsigned long when
675 Tue Nov 7 15:21:06 1995 Ian Lance Taylor <ian@cygnus.com>
677 * configure.in: Call AC_CHECK_PROG to find and cache AR.
678 * configure: Rebuilt.
680 Mon Nov 6 17:39:47 1995 Harry Dolan <dolan@ssd.intel.com>
682 * configure.in: Add case for bfd_i860_arch.
683 * configure: Rebuild.
685 Fri Nov 3 12:45:31 1995 Ian Lance Taylor <ian@cygnus.com>
687 * m68k-opc.c (m68k_opcodes): Correct fmoveml operands.
688 * m68k-dis.c (NEXTSINGLE): Change i to unsigned int.
689 (NEXTDOUBLE): Likewise.
690 (print_insn_m68k): Don't match fmoveml if there is more than one
691 register in the list.
692 (print_insn_arg): Handle a place of '8' for a type of 'L'.
694 Thu Nov 2 23:06:33 1995 Ian Lance Taylor <ian@cygnus.com>
696 * m68k-opc.c: Use #W rather than #w.
697 * m68k-dis.c (print_insn_arg): Handle new 'W' place.
699 Wed Nov 1 13:30:24 1995 Ian Lance Taylor <ian@cygnus.com>
701 * m68k-opc.c (m68k_opcode_aliases): Add dbfw as an alias for dbf,
702 and likewise for all the dbxx opcodes.
704 Mon Oct 30 20:50:40 1995 Fred Fish <fnf@cygnus.com>
706 * arc-dis.c: Include elf-bfd.h rather than libelf.h.
708 Mon Oct 23 11:11:34 1995 James G. Smith <jsmith@pasanda.cygnus.co.uk>
710 * mips-opc.c: Added shorthand (V1) for INSN_4100 manifest. Added
711 the VR4100 specific instructions to the mips_opcodes structure.
713 Thu Oct 19 11:05:23 1995 Stan Shebs <shebs@andros.cygnus.com>
715 * mpw-config.in, mpw-make.sed: Remove ugly workaround for
716 ugly Metrowerks bug in CW6, is fixed in CW7.
718 Mon Oct 16 12:59:01 1995 Michael Meissner <meissner@tiktok.cygnus.com>
720 * ppc-opc.c (whole file): Add flags for common/any support.
722 Tue Oct 10 11:06:07 1995 Fred Fish <fnf@cygnus.com>
724 * Makefile.in (BISON): Remove macro.
725 (FLAGS_TO_PASS): Remove BISON.
727 Fri Oct 6 16:26:45 1995 Ken Raeburn <raeburn@cygnus.com>
729 Mon Sep 25 22:49:32 1995 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
731 * m68k-dis.c (print_insn_m68k): Recognize all two-word
732 instructions that take no args by looking at the match mask.
733 (print_insn_arg): Always print "%" before register names.
734 [case 'c']: Use "nc" for the no-cache case, as recognized by gas.
735 [case '_']: Don't print "@#" before address.
736 [case 'J']: Use "%s" as format string, not register name.
737 [case 'B']: Treat place == 'C' like 'l' and 'L'.
739 Thu Oct 5 22:16:20 1995 Ken Raeburn <raeburn@cygnus.com>
741 * i386-dis.c: Describe cmpxchg8b operand, and spell the opcode
744 Tue Oct 3 08:30:20 1995 steve chamberlain <sac@slash.cygnus.com>
746 From David Mosberger-Tang <davidm@azstarnet.com>
748 * alpha-opc.h (MEMORY_FUNCTION_FORMAT_MASK): added.
749 (alpha_insn_set): added definitions for VAX floating point
750 instructions (Unix compilers don't generate these, but handcoded
751 assembly might still use them).
753 * alpha-dis.c (print_insn_alpha): added support for disassembling
754 the miscellaneous instructions in the Alpha instruction set.
756 Tue Sep 26 18:47:20 1995 Stan Shebs <shebs@andros.cygnus.com>
758 * mpw-config.in: Add m68k-opc.c.o to BFD_MACHINES for m68k,
759 no longer create sysdep.h, sed ppc-opc.c to work around a
760 serious Metrowerks C bug.
761 * mpw-make.in: Remove.
762 * mpw-make.sed: New file, used by mpw-configure to edit
763 Makefile.in into an MPW makefile.
765 Wed Sep 20 12:55:28 1995 Ian Lance Taylor <ian@cygnus.com>
767 * Makefile.in (maintainer-clean): New synonym for realclean.
769 Tue Sep 19 15:28:36 1995 Ian Lance Taylor <ian@cygnus.com>
771 * m68k-opc.c: Split pmove patterns which use 'P' into patterns
772 which use '0', '1', and '2' instead. Specify the proper size for
773 a pmove immediate operand. Correct the pmovefd patterns to be
774 moves to a register, not from a register.
775 * m68k-dis.c (print_insn_arg): Replace 'P' with '0', '1', '2'.
777 Thu Sep 14 11:58:22 1995 Doug Evans <dje@canuck.cygnus.com>
779 * sparc-opc.c (sparc_opcodes): Mark all insns that reference
780 %psr, %wim, %tbr as F_NOTV9.
782 Fri Sep 8 01:07:38 1995 Ian Lance Taylor <ian@cygnus.com>
784 * Makefile.in (Makefile): Just rebuild Makefile when running
786 (config.h, stamp-h): New targets.
787 * configure.in: Call AC_CONFIG_HEADER and AC_CANONICAL_SYSTEM
788 earlier. Don't bother to call AC_ARG_PROGRAM. Touch stamp-h when
790 * configure: Rebuild.
792 * mips-opc.c: Change unaligned loads and stores with "t,A"
793 operands to use "t,A(b)".
795 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
797 * sh-dis.c (print_insn_shx): Add F_FR0 support.
799 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
801 * sh-dis.c (print_insn_shx): Change loop over op->arg[n] to iterate
802 until 3 instead of until 2.
804 Wed Sep 6 21:21:33 1995 Ian Lance Taylor <ian@cygnus.com>
806 * Makefile.in (ALL_CFLAGS): Define.
807 (.c.o, disassemble.o): Use $(ALL_CFLAGS).
808 (MOSTLYCLEAN): Add config.log.
809 (distclean): Don't remove config.log.
810 * configure.in: Substitute HDEFINES.
811 * configure: Rebuild.
813 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
815 * sh-opc.h (sh_arg_type): Add F_FR0.
816 (sh_table, case fmac): Add F_FR0 as first argument.
818 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
820 * sh-opc.h (sh_opcode_info): Increase arg array size to 4.
822 Tue Sep 5 18:28:10 1995 Doug Evans <dje@canuck.cygnus.com>
824 * sparc-dis.c: Remove all references to NO_V9.
826 Tue Sep 5 20:03:26 1995 Ian Lance Taylor <ian@cygnus.com>
828 * aclocal.m4: Just include ../bfd/aclocal.m4.
829 * configure: Rebuild.
831 Tue Sep 5 16:09:59 1995 Doug Evans <dje@canuck.cygnus.com>
833 * sparc-dis.c (X_DISP19): Define.
834 (print_insn, case 'G'): Use it.
835 (print_insn, case 'L'): Sign extend displacement.
837 Mon Sep 4 14:28:46 1995 Ian Lance Taylor <ian@cygnus.com>
839 * configure.in: Run ../bfd/configure.host before AC_PROG_CC.
840 Subsitute CFLAGS and AR. Call AC_PROG_INSTALL. Don't substitute
841 host_makefile_frag or frags.
842 * aclocal.m4: New file.
843 * configure: Rebuild.
844 * Makefile.in (INSTALL): Set to @INSTALL@.
845 (INSTALL_PROGRAM): Set to @INSTALL_PROGRAM@.
846 (INSTALL_DATA): Set to @INSTALL_DATA@.
848 (AR_FLAGS): Set to rc rather than qc.
849 (CC): Define as @CC@.
850 (CFLAGS): Set to @CFLAGS@.
851 (@host_makefile_frag@): Remove.
852 (config.status): Remove dependency upon @frags@.
854 * configure.in: ../bfd/config.bfd now just sets shell variables.
855 Use them rather than looking through target Makefile fragments.
856 * configure: Rebuild.
858 Thu Aug 31 12:35:32 1995 Jim Wilson <wilson@chestnut.cygnus.com>
860 * sh-opc.h (ftrc): Change FPUL_N to FPUL_M.
862 Wed Aug 30 13:52:28 1995 Doug Evans <dje@canuck.cygnus.com>
864 * sparc-opc.c (sparc_opcodes): Delete duplicate wr %y insn.
865 Add clrx, iprefetch, signx, clruw, cas, casl, casx, casxl synthetic
868 * sparc-opc.c (sparc_opcodes): Fix prefetcha insn.
869 (lookup_{name,value}): New functions.
870 (prefetch_table): New static local.
871 (sparc_{encode,decode}_prefetch): New functions.
872 * sparc-dis.c (print_insn): Handle '*' arg (prefetch function).
874 Wed Aug 30 11:11:58 1995 Jim Wilson <wilson@chestnut.cygnus.com>
876 * sh-opc.h: Add blank lines to improve readabililty of sh3e
879 Wed Aug 30 11:09:38 1995 Jim Wilson <wilson@chestnut.cygnus.com>
881 * sh-dis.c: Correct comment on first line of file.
883 Tue Aug 29 15:37:18 1995 Doug Evans <dje@canuck.cygnus.com>
885 * disassemble.c (disassembler): Handle bfd_mach_sparc64.
887 * sparc-opc.c (asi, membar): New static locals.
888 (sparc_{encode,decode}_{asi,membar}): New functions.
889 (sparc_opcodes, membar insn): Fix.
890 * sparc-dis.c (print_insn): Call sparc_decode_asi.
891 Support decoding of membar masks.
894 Sat Aug 26 21:22:48 1995 Ian Lance Taylor <ian@cygnus.com>
896 * m68k-opc.c (m68k_opcode_aliases): Add br, brs, brb, brw, brl.
898 Mon Aug 21 17:33:36 1995 Ian Lance Taylor <ian@cygnus.com>
900 * m68k-opc.c (m68k_opcode_aliases): Add bhib as an alias for bhis,
901 and likewise for the other branches. Add bhs as an alias for bcc,
902 and likewise for the size variants. Add dbhs as an alias for
905 Fri Aug 11 13:40:24 1995 Jeff Law (law@snake.cs.utah.edu)
907 * sh-opc.h (FP sts instructions): Update to match reality.
909 Mon Aug 7 16:12:58 1995 Ian Lance Taylor <ian@cygnus.com>
911 * m68k-dis.c: (fpcr_names): Add % before all register names.
912 (reg_names): Likewise.
913 (print_insn_arg): Don't explicitly print % before register names.
914 Add % before register names in static array names. In case 'r',
915 print data registers as `@(Dn)', not `Dn@'. When printing a
916 memory address, don't print @# before it.
917 (print_indexed): Change base_disp and outer_disp from int to
918 bfd_vma. Print using MIT syntax, not mutant invalid Motorola
919 syntax. Sign extend 8 byte displacement correctly.
920 (print_base): Print using MIT syntax. Print zpc when appropriate.
921 Change parameter disp from int to bfd_vma.
923 * m68k-opc.c (m68k_opcode_aliases): Add jsrl and jsrs as aliases
926 Mon Aug 7 02:21:40 1995 Jeff Law (law@snake.cs.utah.edu)
928 * sh-dis.c (print_insn_shx): Handle new operand types F_REG_N,
929 F_REG_M, FPSCR_M, FPSCR_N, FPUL_M and FPUL_N.
930 * sh-opc.h (sh_arg_type): Add new operand types.
931 (sh_table): Add new opcodes from SH3E Floating Point ISA.
933 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
935 * Makefile.in (distclean): Remove generated file config.h.
937 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
939 * Makefile.in (distclean): Remove generated file config.h.
941 Wed Aug 2 18:33:40 1995 Ian Lance Taylor <ian@cygnus.com>
943 * m68k-opc.c: New file, holding tables from include/opcode/m68k.h.
945 * m68k-dis.c: Remove BREAK_UP_BIG_DECL stuff.
947 (print_insn_m68k): Change d to be const. Use m68k_numopcodes
948 rather than numopcodes. Use m68k_opcodes rather than removed
949 opcode function. Don't check F_ALIAS.
950 (print_insn_arg): Change first parameter to be const char *.
951 * Makefile.in (ALL_MACHINES): Add m68k-opc.o.
952 (m68k-opc.o): New target.
953 * configure.in: Build m68k-opc.o for bfd_m68k_arch.
954 * configure: Rebuild.
956 Wed Aug 2 08:23:38 1995 Doug Evans <dje@canuck.cygnus.com>
958 * sparc-dis.c (HASH_SIZE, HASH_INSN): Define.
959 (opcode_bits, opcode_hash_table): New variables.
960 (opcodes_initialized): Renamed from opcodes_sorted.
961 (build_hash_table): New function.
962 (is_delayed_branch): Use hash table.
963 (print_insn): Renamed from print_insn_sparc, made static.
964 Build and use hash table. If !sparc64, ignore sparc64 insns,
965 and vice-versa if sparc64.
966 (print_insn_sparc, print_insn_sparc64): New functions.
967 (compare_opcodes): Move sparc64 opcodes to end.
968 Print commutative insns with constant second.
969 * sparc-opc.c (all non-v9 insns): Use flag F_NOTV9 instead of F_ALIAS.
971 Tue Aug 1 00:12:49 1995 Ian Lance Taylor <ian@cygnus.com>
973 * sh-dis.c (print_insn_shx): Remove unused local dslot. Use
974 print_address_func for A_BDISP12 and A_BDISP8. Correct test which
975 avoids printing a delay slot in a delay slot.
976 * sh-opc.h (sh_table): Fully bracket last entry.
978 Mon Jul 31 12:04:47 1995 Doug Evans <dje@canuck.cygnus.com>
980 * sparc-opc.c (sllx, srax, srlx): Fix disassembly.
982 Wed Jul 12 00:59:34 1995 Ken Raeburn <raeburn@kr-pc.cygnus.com>
984 * configure.in: Get host_makefile_frag from ${srcdir}.
986 * configure.in: Autoconfiscated. Check for string[s].h. Create
987 config.h from config.in. Don't set up sysdep.h link.
988 * sysdep.h: New file.
989 * configure, config.in: New files, generated from configure.in.
990 * Makefile.in: Updated to be processed autoconf-style.
991 (distclean): Keep sysdep.h. Remove config.log and config.cache.
992 (Makefile): Depend on config.status.
993 (config.status): New rule.
994 * configure.bat: Update Makefile substitutions.
996 Tue Jul 11 14:23:37 1995 Jeff Spiegel <jeffs@lsil.com>
998 * mips-opc.c (L1): Define.
999 (mips_opcodes): Add R4010 instructions: flushi, flushd, flushid,
1000 addciu, madd, maddu, ffc, ffs, msub, msubu, selsi, selsr, waiti,
1003 Tue Jul 11 11:49:49 1995 Ian Lance Taylor <ian@cygnus.com>
1005 * mips-opc.c (mips_opcodes): For the move pseudo-op, prefer daddu
1006 if ISA 3 and addu otherwise, replacing or, since some MIPS chips
1007 have multiple add units but only a single logical unit.
1009 * ppc-opc.c (powerpc_operands): Change CR to use a bitsize of 3,
1010 shifted by 18, without any insertion or extraction function.
1011 (insert_cr, extract_cr): Remove.
1014 Mon Jul 3 11:54:31 1995 Ian Lance Taylor <ian@cygnus.com>
1016 * Makefile.in (ALL_MACHINES): Add arc-dis.o and arc-opc.o.
1019 Wed Jun 21 20:05:39 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
1021 * m68k-dis.c (print_insn_arg, print_indexed): Print "%" before
1024 Thu Jun 15 17:23:31 1995 Stan Shebs <shebs@andros.cygnus.com>
1026 * mpw-config.in: Add sh and i386 configs, remove sparc config.
1027 * sh-opc.h: Add copyright.
1029 Mon Jun 5 03:30:43 1995 Ken Raeburn <raeburn@kr-laptop.cygnus.com>
1031 * Makefile.in (crunch-m68k): Delete extra target accidentally
1032 checked in a while ago.
1034 Wed May 24 16:22:13 1995 Jim Wilson <wilson@chestnut.cygnus.com>
1036 * sh-opc.h (sh_table): Add SH3 support.
1038 Wed May 24 14:16:08 1995 Steve Chamberlain <sac@slash.cygnus.com>
1040 * sh-opc.h: Added bsrf and braf.
1042 Wed May 10 14:28:16 1995 Richard Earnshaw (rearnsha@armltd.co.uk)
1044 * arm-opc.h (arm_opcodes): Add 64-bit multiply patterns. Delete
1045 bogus [ls]fm{ea,fd} patterns.
1047 * arm-opc.h (arm_opcodes): Correct typos in stm, ldm, std, and ldc.
1048 * arm-dis.c (print_insn_arm): Make GIVEN a parameter, don't try and
1049 initialize it from memory. Make function static.
1050 (print_insn_{big,little}_arm): New functions.
1051 * disassemble.c (disassembler, case bfd_arch_arm): Disassemble for
1052 the correct endianness.
1055 Sat Apr 29 23:20:05 1995 Doug Evans <dje@chestnut.cygnus.com>
1057 * arc-opc.c (arc_opcodes): Add ARC_OPCODE_CONDITIONAL_BRANCH flag.
1058 (arc_suffixes): Use ARC_DELAY_{NONE,NORMAL,JUMP}.
1061 Mon Apr 24 14:18:05 1995 Jason Molenda (crash@phydeaux.cygnus.com>
1063 * sh-opc.h (sh_nibble_type, sh_arg_type): remove trailing , from
1066 Wed Apr 19 14:07:03 1995 Michael Meissner <meissner@tiktok.cygnus.com>
1068 * m68k-dis.c (opcode): Finish change made by Kung Hsu on April
1069 17th, so that it builds again using GCC as the compiler.
1071 Tue Apr 18 12:14:51 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
1073 * mips-dis.c (print_insn_little_mips): Cast return value from
1074 bfd_getl32 from bfd_vma to unsigned long, because _print_insn_mips
1075 expects an unsigned long, and that might be fewer words of
1076 argument storage (e.g., if bfd_vma is long long on a 32-bit
1078 (print_insn_big_mips): Likewise with bfd_getb32 value.
1079 (_print_insn_mips): Now static.
1081 Mon Apr 17 12:23:28 1995 Kung Hsu <kung@rtl.cygnus.com>
1083 * m68k-dis.c: Take out #define BREAK_UP_BIG_DECL kludge, because
1084 gcc memory hog problem with initializer is fixed.
1087 Wed Apr 12 09:04:12 1995 Doug Evans <dje@canuck.cygnus.com>
1089 * arc-opc.c (NULL): Define.
1090 (arc_operands, insn fields u,s): Delete.
1091 (arc_operands, insn fields a,b,c): Mark as signed.
1092 (arc_opcodes): No longer const, links computed at run-time.
1093 (arc_opcodes, mac/mul insns): Breakout suffixes as we don't handle
1094 suffixes that affect the insn code.
1095 (arc_opcodes): Resort table to macros are first.
1096 (arc_opcodes, ld [b,c] entry): Add %Q to prevent shimms.
1097 (arc_opcodes, st [b] entry): Likewise.
1098 (arc_opcodes, st [b,d] entry): Fix mask, value.
1099 (arc_reg_names): Add entries for r29, r30, r31, r60.
1100 (opcode_map, icode_map): New static globals.
1101 (arc_opcode_init_tables): Initialize them.
1102 (arc_opcode_lookup_asm, arc_opcode_lookup_dis): New functions.
1103 (insert_shimmoffset): Signal error if register present.
1105 * arc-dis.c (print_insn): Call arc_opcode_lookup_dis.
1108 Mon Apr 10 15:55:01 1995 Stan Shebs <shebs@andros.cygnus.com>
1110 Merge in support for Mac MPW as a host.
1111 (Old change descriptions retained for informational value.)
1113 * mpw-config.in (archname): Compute from the config.
1114 (BFD_MACHINES, ARCHDEFS): Put into mk.tmp.
1116 * mpw-config.in (target_arch): Compute from canonical target.
1117 (m68k, mips, powerpc, sparc): Add architectures.
1118 * mpw-make.in (disassemble.c.o): Add.
1119 (ALL_CFLAGS): Remove special flags (-mc68020 -mc68881 -model far).
1121 * mpw-config.in (BFD_MACHINES): Set to a default value.
1122 * mpw-make.in (BFD_MACHINES): Remove wired-in value.
1124 * mpw-make.in (CSEARCH): Add extra-include to search path.
1126 * mpw-config.in (varargs.h): Don't create.
1127 (sysdep.h): Create using forward-include.
1128 * mpw-make.in (CSEARCH): Add include/mpw to search path.
1130 * mpw-config.in: New file, MPW version of configure.in.
1131 * mpw-make.in: New file, MPW version of Makefile.in.
1134 Thu Apr 6 20:36:08 1995 Doug Evans <dje@chestnut.cygnus.com>
1136 * arc-dis.c (print_insn): New parameter `big_p'. Callers updated.
1137 Call arc_get_opcode_mach to map bfd mach number to opcode value.
1138 (print_insn_*): Pass bfd mach number, not opcode version.
1139 * arc-opc.c (arc_get_opcode_mach): New function.
1142 Fri Mar 31 14:23:38 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
1144 * alpha-dis.c (print_insn_alpha): Put empty statement after
1147 Tue Mar 21 10:51:40 1995 Jeff Law (law@snake.cs.utah.edu)
1149 * hppa-dis.c (sign_extend): Delete, redundant with libhppa.h version.
1150 (low_sign_extend): Likewise.
1151 (get_field): Delete unused function.
1152 (set_field, deposit_14, deposit_21): Likewise.
1154 Fri Mar 17 15:55:53 1995 J.T. Conklin <jtc@rtl.cygnus.com>
1156 * i386-dis.c: Support for more pentium opcodes. From Guy Harris
1159 Tue Mar 14 00:52:57 1995 Ken Raeburn (raeburn@kr-pc.cygnus.com)
1161 Sat Feb 11 17:22:41 1995 Klaus Kaempf (kkaempf@didymus.rmi.de)
1163 * alpha-opc.h (OSF_ASMCODE): define
1164 print pal-code names as defined in App C of the
1165 Alpha Architecture Reference Manual
1167 * alpha-dis.c: cleaned up output
1168 print stylized code forms as defined in App A.4.3 of the
1169 Alpha Architecture Reference Manual
1171 Wed Mar 8 15:21:14 1995 Ian Lance Taylor <ian@cygnus.com>
1173 * mips-opc.c: Add new mips4 instructions. Don't set INSN_RFE for
1175 * mips-dis.c (print_insn_arg): Handle new argument types 'h', 'R',
1178 Wed Mar 8 02:54:05 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
1180 * m68k-dis.c (opcode): New function. Returns address of opcode
1181 table entry given index, even if the opcode table was split to
1182 work around gcc bugs.
1183 (print_insn_m68k): Call opcode instead of referencing m68k_opcodes
1185 (BREAK_UP_BIG_DECL): Make secondary array static and const.
1186 (reg_names): Now const.
1187 (print_insn_arg): Arrays cacheFieldName and names now const.
1188 (print_indexed): Array scales now const.
1191 Tue Mar 7 21:14:14 1995 Doug Evans <dje@chestnut.cygnus.com>
1193 * arc-dis.c (print_insn_arc_base): Split into big and little fns.
1194 (print_insn_arc_{host,graphics,audio}): Likewise.
1195 (print_insn): Add prototype.
1196 (arc_get_disassembler): New arg `big_p'. Return little or big
1197 print fn accordingly.
1198 * arc-opc.c (arc_opcode_init_tables): Init arc_operand_map once.
1199 (arc_opcode_supported): Use ARC_OPCODE_CPU to ignore byte order.
1200 (arc_opval_supported): Likewise.
1201 * disassemble.c (disassembler): Pass big endian flag to
1202 arc_get_disassembler.
1205 Tue Mar 7 16:41:21 1995 Ian Lance Taylor <ian@cygnus.com>
1207 * ppc-opc.c: Sort recently added instructions by minor opcode
1208 number within major opcode number.
1210 Mon Mar 6 10:04:36 1995 Jeff Law (law@snake.cs.utah.edu)
1212 * hppa-dis.c: Include libhppa.h.
1214 Fri Feb 24 19:15:36 1995 Ian Lance Taylor <ian@cygnus.com>
1216 * mips-opc.c: Change dli to use M_DLI, and add dla.
1218 Mon Feb 20 23:54:38 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1220 * Makefile.in (ALL_MACHINES): Add w65-dis.o.
1223 Fri Feb 17 12:42:25 1995 Doug Evans <dje@chestnut.cygnus.com>
1225 * arc-dis.c (arc_get_disassembler): Change argument to int,
1226 one of bfd_mach_arc_xxx. All callers updated.
1229 Thu Feb 16 17:34:41 1995 Ian Lance Taylor <ian@cygnus.com>
1231 * mips-opc.c: Add r4650 mul instruction.
1233 Wed Feb 15 15:45:20 1995 Ian Lance Taylor <ian@cygnus.com>
1235 * mips-opc.c: Add uld and usd macros for unaligned double load and
1238 Tue Feb 14 13:17:37 1995 Michael Meissner <meissner@tiktok.cygnus.com>
1240 * ppc-opc.c (powerpc_opcodes): Add 403GA opcodes rfci, dccci,
1241 mfdcr, mtdcr, icbt, iccci.
1244 Mon Feb 13 11:09:17 1995 Doug Evans <dje@canuck.cygnus.com>
1246 * arc-dis.c (print_insn): Handle ARC_OPERAND_ADDRESS.
1247 * arc-opc.c (arc_operands): New operand 'J' for jump addresses.
1248 ('L' operand): Mark as ARC_OPERAND_ADDRESS.
1249 (arc_opcodes, j insn): Use 'J' operand type, not 'L'.
1250 (arc_opcodes, ld/st insns): Fix address writeback operand letter.
1251 (insert_absaddr): New function.
1253 Thu Feb 9 19:19:23 1995 Doug Evans <dje@canuck.cygnus.com>
1255 * arc-dis.c (print_insn_arc): Rename to print_insn and make static.
1256 New argument `cpu', pass it to arc_opcode_init_tables.
1257 Document byte order dependencies. Ignore unsupported insns.
1258 (arc_get_disassembler): New function.
1259 (print_insn_arc_base, print_insn_arc_host, print_insn_arc_graphics,
1260 print_insn_arc_audio): New functions.
1261 * arc-opc.c (MULTSHIFT operand): Delete.
1262 (UNSIGNED, SATURATION): New operands.
1263 (mac, mul, mul64, mulu64): New insns.
1264 (ext. asl, asr, lsr, ror): Only available on host and graphics cpus.
1265 (padc, padd, pmov, pand, psbc, psub, swap): New insns.
1266 (host,graphics,audio extended and auxiliary regs): Define.
1267 (ss, sc, mh, ml): New suffixes.
1268 (arc_opcode_supported, arc_opval_supported): New functions.
1269 (insert_multshift, extract_multshift): Deleted.
1270 * disassemble.c (disassembler, case bfd_arch_arc): Call
1271 arc_get_disassembler to get disassembler routine.
1274 Thu Feb 9 12:28:13 1995 Stan Shebs <shebs@andros.cygnus.com>
1276 * i960-dis.c (struct tabent, struct sparse_tabent): Change the
1277 signed char fields to shorts, more portable.
1279 Wed Feb 8 17:29:29 1995 Stan Shebs <shebs@andros.cygnus.com>
1281 * i960-dis.c (struct tabent, struct sparse_tabent): Declare the
1282 char fields as signed chars, since they may have negative values.
1284 Mon Feb 6 10:52:06 1995 J.T. Conklin <jtc@rtl.cygnus.com>
1286 * i386-dis.c (dis386_twobyte): Add cpuid, From Charles Hannum
1287 (mycroft@netbsd.org).
1289 Mon Jan 30 12:38:00 1995 Ian Lance Taylor <ian@cygnus.com>
1291 From "Logg, Ed" <elogg@ea.com>:
1292 * ppc-opc.c (extract_bdm): Correct parenthezisation.
1293 * ppc-dis.c (print_insn_powerpc): Print .long before unrecognized
1296 Thu Jan 26 18:32:08 1995 Ian Lance Taylor <ian@cygnus.com>
1298 * ppc-opc.c: Changes based on patch from David Edelsohn
1299 <edelsohn@mhpcc.edu>.
1300 (powerpc_operands): Add operands SPRBAT and SPRG. Split TBR out of
1303 (insert_tbr): New static function.
1304 (extract_tbr): New static function.
1305 (XFXFXM_MASK, XFXM): Define.
1306 (XSPRBAT_MASK, XSPRG_MASK): Define.
1307 (powerpc_opcodes): Add instructions to access special registers by
1308 name. Add mtcr and mftbu.
1310 Tue Jan 17 10:56:43 1995 Ian Lance Taylor <ian@sanguine.cygnus.com>
1312 * mips-opc.c (P3): Define.
1313 (mips_opcodes): Add mad and madu.
1315 Sun Jan 15 16:32:59 1995 Steve Chamberlain <sac@splat>
1317 * configure.in: Add W65 support.
1318 * disassemble.c: Likewise.
1319 * w65-opc.h, w65-dis.c: New files.
1321 Wed Dec 28 22:15:33 1994 Steve Chamberlain (sac@jonny.cygnus.com)
1323 * h8300-dis.c (bfd_h8_disassemble): Add support for 2 bit
1327 Tue Dec 20 10:36:55 1994 Doug Evans <dje@canuck.cygnus.com>
1329 * arc-dis.c (print_insn_arc): Branch offsets are relative to delay
1331 * arc-opc.c (extract_reladdr): New function.
1332 (insert_reladdr): Store address right-shifted by 2.
1335 Tue Dec 20 11:25:12 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
1337 * mips-opc.c: Add dli as a synonym for li.
1340 Mon Dec 19 12:35:51 1994 Doug Evans <dje@canuck.cygnus.com>
1342 * arc-opc.c (insertion fns): Pass pointer to value's table entry.
1344 (extraction fns): Insn argument now array of two words. Return pointer
1345 to value's table entry. All uses changed.
1346 (arc_opcode_lookup_suffix): Exported for arc-dis.c.
1347 (insert_multshift, extract_multshift): New fns.
1348 (arc_operands): Add support for cache bypass suffix. Add support for
1349 predefined aux regs. Modifier bits moved to flags field.
1350 (arc_opcodes): Likewise.
1351 Add mul/mulu/shift insns. Syntax of zero/sign extension insns changed.
1352 New insn rlc. Update to syntax in programmer's manual.
1353 (arc_reg_names): Fix typo in lp_count. Add predefined aux regs.
1354 (arc_suffixes): New synonyms lo,hs for cs,cc. New suffix for cache
1356 (arc_opcode_init_tables): New argument to indicate cpu type.
1357 (insert_reg): Handle predefined aux regs.
1358 (extract_reg): Likewise.
1359 (lookup_register): New fn.
1360 * arc-dis.c (arc_condition_codes): Deleted.
1361 (print_insn_arc): Handle insns with 32 bit immediate constants better.
1362 Clean up modifier handling. Handle predefined aux regs.
1365 Thu Dec 8 18:23:31 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
1367 * alpha-dis.c (print_insn_alpha): Handle call_pal instruction, and
1368 print something for reserved opcode values, even if it won't
1371 * mips-dis.c (_print_insn_mips): When initializing, shift right
1372 and mask, to avoid sign extension problems on the Alpha.
1374 * m68k-dis.c (print_insn_arg, case 'J'): Handle buscr and pcr
1378 Tue Nov 29 18:02:43 1994 Doug Evans <dje@canuck.cygnus.com>
1380 * configure.in: Add ARC support.
1381 * disassemble.c: Likewise.
1382 * arc-dis.c, arc-opc.c: New files.
1385 Wed Nov 23 22:34:51 1994 Steve Chamberlain (sac@jonny.cygnus.com)
1387 * sh-opc.h (mov.l gbr): Get direction right.
1388 * sh-dis.c (print_insn_shx): New function.
1389 (print_insn_shl, print_insn_sh): Call print_insn_shx to
1390 print opcodes with right byte order.
1392 Thu Nov 3 19:32:22 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
1394 * ns32k-dis.c (struct ns32k_option): Renamed from struct option,
1395 to avoid conflicts with getopt.
1397 Mon Oct 31 18:48:10 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
1399 * hppa-dis.c (print_insn_hppa): Read the instruction using
1400 bfd_getb32, so that it works on a little endian or 64 bit host.
1401 Remove unused local variable op.
1403 Tue Oct 25 17:07:57 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
1405 * mips-opc.c: Use or instead of addu for pseudo-op move, since
1406 addu does not work correctly if -mips3.
1408 Wed Oct 19 13:40:16 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
1410 * a29k-dis.c (print_special): Add special register names defined
1411 on 29030, 29040 and 29050.
1412 (print_insn): Handle new operand type 'I'.
1414 Wed Oct 12 11:59:55 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
1416 * Makefile.in (INSTALL): Use top level install.sh script.
1418 Wed Oct 5 19:16:29 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
1420 * sparc-dis.c: Rewrite to use bitfields, rather than a union, so
1421 that it works on a little endian host.
1423 Tue Oct 4 12:14:21 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
1425 * configure.in: Use ${config_shell} when running config.bfd.
1427 Wed Sep 21 18:49:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
1429 * mips-opc.c (mips_opcodes): "dabs" is only available with -mips3.
1431 Thu Sep 15 16:30:22 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
1433 * a29k-dis.c (print_insn): Print the opcode.
1435 Wed Sep 14 17:52:14 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
1437 * mips-opc.c (mips_opcodes): Set WR_t for sc and scd.
1439 Sun Sep 11 22:32:17 1994 Jeff Law (law@snake.cs.utah.edu)
1441 * hppa-dis.c (reg_names): Use r26-r23 for arg0-arg3.
1443 Tue Sep 6 11:37:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
1445 * mips-opc.c: Set INSN_STORE_MEMORY flag for all instructions
1446 which store a value into memory.
1448 Sun Sep 04 17:58:10 1994 Richard Earnshaw (rwe@pegasus.esprit.ec.org)
1450 * configure.in, Makefile.in, disassemble.c: Add support for the ARM.
1451 * arm-dis.c, arm-opc.h: New files.
1453 Fri Aug 5 14:00:05 1994 Stan Shebs (shebs@andros.cygnus.com)
1455 * Makefile.in (ns32k-dis.o): Add dependency.
1456 * ns32k-dis.c (print_insn_arg): Declare initialized local as
1457 string, not as array of chars.
1459 Thu Jul 28 18:14:16 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
1461 * sparc-dis.c (print_insn_sparc): Handle new operand type 'x'.
1463 * sparc-opc.c: Added sparclite extended FP operations, and
1464 versions of v9 impdep* instructions permitting specification of
1467 Tue Jul 26 16:36:03 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
1469 * i960-dis.c (reg_names): Now const.
1470 (struct sparse_tabent): New type, copied from array type in mem
1472 (ctrl): Local static array ctrl_tab now const.
1473 (cobr): Local static array cobr_tab now const.
1474 (mem): Local variables reg1, reg2, reg3 now point to const. Local
1475 static variable mem_tab no longer explicitly initialized. Changed
1476 mem_init to const array of struct sparse_tabent.
1477 (reg): Local static variable reg_tab no longer explicitly
1478 initialized. Changed reg_init to const array of struct
1480 (ea): Local static array scale_tab now const.
1482 * i960-dis.c (reg): Added i960JX instructions to reg_init table.
1485 Tue Jul 19 21:00:00 1994 DJ Delorie (dj@ctron.com)
1487 * configure.bat: the disassember needs to be enabled for
1488 "objdump -d" to work in djgpp.
1490 Wed Jul 13 18:01:58 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
1492 * ns32k-dis.c: Deleted all code in "#ifdef GDB".
1493 (invalid_float): Enabled general version, doesn't require running
1494 on ns32k host. Changed to take char* argument, and test for
1495 explicitly specified sizes, instead of using sizeof() on host CPU
1497 (INVALID_FLOAT): Cast first argument.
1498 (opt_u, opt_U, opt_O, opt_C, opt_S, list_P532, list_M532,
1499 list_P032, list_M032): Now const.
1500 (optlist, list_search): Made appropriate arguments now point to
1502 (print_insn_arg): Changed static array of one-character-string
1503 pointers into a static const array of characters; fixed sprintf
1504 statement accordingly.
1506 Sun Jul 10 00:27:47 1994 Ian Dall (dall@hfrd.dsto.gov.au)
1508 * opcodes/ns32k-dis.c: Semi-new file. Had apparently been dropped
1509 from distribution. A ns32k-dis.c from a previous distribution has
1510 been brought up to date and supports the new interface.
1512 * disassemble.c: define ARCH_ns32k and add case bfd_arch_ns32k.
1514 * configure.in: add bfd_ns32k_arch target support.
1516 * Makefile.in: add ns32k-dis.o to ALL_MACHINES.
1517 Add ns32k-dis.c to CFILES. Add dependencies for ns32k-dis.o.
1519 Wed Jun 29 22:10:37 1994 Steve Chamberlain (sac@cygnus.com)
1521 * h8300-dis.c (bfd_h8_disassemble): Get 16bit branch
1524 Tue Jun 28 13:22:06 1994 Stan Shebs (shebs@andros.cygnus.com)
1526 * h8300-dis.c, mips-dis.c: Don't use true and false.
1528 Thu Jun 23 12:53:19 1994 David J. Mackenzie (djm@rtl.cygnus.com)
1530 * configure.in: Change --with-targets to --enable-targets.
1532 Wed Jun 22 13:38:32 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
1534 * mips-dis.c (_print_insn_mips): Build a static hash table mapping
1535 opcodes to the first instruction with that opcode, to speed
1536 disassembly of large files. From ralphc@pyramid.com (Ralph
1539 Tue Jun 7 12:49:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1541 * Makefile.in (mostlyclean): Fix typo (was mostyclean).
1543 Wed May 11 22:32:00 1994 DJ Delorie (dj@ctron.com)
1545 * configure.bat: update to latest makefile.in
1547 Sat May 7 17:13:21 1994 Steve Chamberlain (sac@cygnus.com)
1549 * a29k-dis.c (print_insn): Print 'x' type operand in hex.
1550 * h8300-dis.c (bfd_h8_disassemble): Print 16bit rels correctly.
1551 * sh-dis.c (print_insn_sh): Don't recur endlessly if delay
1552 slot insn is in a delay slot.
1553 * z8k-opc.h: (resflg): Fix patterns.
1554 * h8500-opc.h Fix CR insn patterns.
1556 Fri May 6 14:34:46 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1558 * ppc-opc.c (powerpc_opcodes): Put PowerPC versions of "cmp" and
1559 "cmpl" before POWER versions, so that gas -many uses them.
1561 Thu Apr 28 18:32:36 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
1563 * disassemble.c: New file.
1564 * Makefile.in (OFILES): Add disassemble.o.
1565 (disassemble.o): Provide dependencies; compile with $(ARCHDEFS).
1566 * configure.in: Define ARCHDEFS in Makefile. Code taken from
1567 binutils/configure.in.
1569 * m68k-dis.c (print_insn_m68k): If F_ALIAS flag is set, skip the
1570 opcode being examined.
1572 Thu Apr 21 17:08:40 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1574 * ppc-opc.c (powerpc_operands): Added RAL, RAM and RAS.
1575 (insert_ral, insert_ram, insert_ras): New functions.
1576 (powerpc_opcodes): Use RAL for load with update, RAM for lmw, and
1577 RAS for store with update.
1579 Sat Apr 16 23:41:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1581 * ppc-opc.c (powerpc_opcodes): Correct fcir. From David Edelsohn
1582 (edelsohn@npac.syr.edu).
1584 Wed Apr 6 17:11:45 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1586 * mips-opc.c (mips_opcodes): Correct operands of "nor" with an
1589 Mon Apr 4 16:30:46 1994 Doug Evans (dje@canuck.cygnus.com)
1591 * sparc-opc.c (sparc_opcodes): Fix "rd %fprs,%l0".
1593 Mon Apr 4 13:22:00 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1595 * ppc-opc.c (powerpc_operands): The signedp field has been
1596 removed, so don't initialize it. Set the PPC_OPERAND_SIGNED flag
1597 instead. Add new operand SISIGNOPT.
1598 (powerpc_opcodes): For lis, liu, addis, and cau use SISIGNOPT.
1599 Based on patch from David Edelsohn (edelsohn@npac.syr.edu).
1600 * ppc-dis.c (print_insn_powerpc): Check PPC_OPERAND_SIGNED rather
1603 Wed Mar 30 00:31:49 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1605 * i386-dis.c (struct private): Renamed to dis_private. `private'
1606 is a reserved word for dynix cc.
1608 Mon Mar 28 13:00:15 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1610 * configure.in: Change error message to refer to bfd/config.bfd
1611 rather than bfd/configure.in.
1613 Mon Mar 28 12:28:30 1994 David Edelsohn (edelsohn@npac.syr.edu)
1615 * ppc-opc.c: Define POWER2 as short alias flag.
1616 (powerpc_opcodes): Add POWER/2 opcodes lfq*, stfq*, fcir[z], and
1619 Wed Mar 23 12:23:05 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1621 * i960-dis.c (print_insn_i960): Don't read a second word for
1622 opcodes 0, 1, 2 and 3.
1624 Wed Mar 16 15:37:58 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1626 * configure.in: Don't build m68881-ext.o for bfd_m68k_arch.
1628 Mon Mar 14 14:53:50 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1630 * m68881-ext.c: Removed; no longer used.
1631 * Makefile.in: Changed accordingly.
1633 * m68k-dis.c (ext_format_68881): Don't declare.
1634 (print_insn_m68k): If an instruction uses place 'i', it uses at
1635 least four fixed bytes.
1636 (print_insn_arg): Don't bump p by 2 for case 'I', place 'i'. For
1637 extended float, convert to double using floatformat_to_double, not
1638 ieee_extended_to_double, and fetch the data before converting it.
1640 Tue Mar 8 18:12:25 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1642 * mips-opc.c: It's sqrt.s, not sqrt.w. From
1643 davidj@ICSI.Berkeley.EDU (David Johnson).
1645 Tue Feb 8 16:55:27 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1647 * ppc-opc.c (powerpc_opcodes): The POWER uses bdn[l][a] where the
1648 PowerPC uses bdnz[l][a].
1650 Tue Feb 8 00:32:28 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1652 * dis-buf.c, i386-dis.c: Include sysdep.h.
1654 Mon Feb 7 19:22:23 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1656 * configure.in (bfd_powerpc_arch): Use ppc-dis.o and ppc-opc.o.
1658 * ppc-opc.c (powerpc_opcodes): Mark POWER instructions supported
1659 by Motorola PowerPC 601 with PPC_OPCODE_601.
1660 * ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc):
1661 Disassemble Motorola PowerPC 601 instructions as well as normal
1662 PowerPC instructions.
1664 Sun Feb 6 07:45:17 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
1666 * i960-dis.c (reg, mem): Just use a static array instead of
1669 Sat Feb 5 00:04:02 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
1671 * hppa-dis.c (print_insn_hppa): For '?' and '@' only adjust the
1672 condition name index if this is for a negated condition.
1674 * hppa-dis.c (print_insn_hppa): No space before 'H' operand.
1675 Floating point format for 'H' operand is backwards from normal
1676 case (0 == double, 1 == single). For '4', '6', '7', '9', and '8'
1677 operands (fmpyadd and fmpysub), handle bizarre register
1678 translation correctly for single precision format.
1680 * hppa-dis.c (print_insn_hppa): Do not emit a space after 'F'
1681 or 'I' operands if the next format specifier is 'M' (fcmp
1682 condition completer).
1684 Feb 4 23:38:03 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1686 * ppc-opc.c (powerpc_operands): New operand type MBE to handle a
1687 single number giving a bitmask for the MB and ME fields of an M
1688 form instruction. Change NB to accept 32, and turn it into 0;
1689 also turn 0 into 32 when disassembling. Seperated SH from NB.
1690 (insert_mbe, extract_mbe): New functions.
1691 (insert_nb, extract_nb): New functions.
1692 (SC_MASK): Mask out SA and LK bits.
1693 (powerpc_opcodes): Change "cal" to use RT, D, RA rather than RT,
1694 RA, SI. Change "liu" and "cau" to use UI rather than SI. Mark
1695 "bctr" and "bctrl" as accepted by POWER. Change "rlwimi",
1696 "rlimi", "rlwimi.", "rlimi.", "rlwinm", "rlinm", "rlwinm.",
1697 "rlinm.", "rlmi", "rlmi.", "rlwnm", "rlnm", "rlwnm.", "rlnm." to
1698 use MBE rather than MB. Add "mfmq" and "mtmq" POWER instructions.
1699 (powerpc_macros): Define table of macro definitions.
1700 (powerpc_num_macros): Define.
1702 * ppc-dis.c (print_insn_powerpc): Don't skip optional operands
1703 if PPC_OPERAND_NEXT is set.
1705 Sat Jan 22 23:10:07 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1707 * i960-dis.c (print_insn_i960): Make buffer bfd_byte instead of
1708 char. Retrieve contents using bfd_getl32 instead of shifting.
1710 Fri Jan 21 19:01:39 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1712 * ppc-opc.c: New file. Opcode table for PowerPC, including
1713 opcodes for POWER (RS/6000).
1714 * ppc-dis.c: New file. PowerPC and Power (RS/6000) disassembler.
1715 * Makefile.in (ALL_MACHINES): Add ppc-dis.o and ppc-opc.o.
1716 (CFILES): Add ppc-dis.c.
1717 (ppc-dis.o, ppc-opc.o): New targets.
1718 * configure.in: Build ppc-dis.o and ppc-opc.o for bfd_rs6000_arch.
1720 Mon Jan 17 20:05:49 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
1722 * hppa-dis.c (print_insn_hppa): Handle 'N' in assembler template.
1723 No space before 'u', 'f', or 'N'.
1725 Sun Jan 16 14:20:16 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
1727 * i386-dis.c (print_insn_i386): Add FIXME comment regarding reading
1728 farther than we should.
1730 * i386-dis.c (dis386): Use Yb and Yv for scasb and scasS.
1732 Thu Jan 6 12:38:05 1994 David J. Mackenzie (djm@thepub.cygnus.com)
1734 * sparc-dis.c m68k-dis.c alpha-dis.c a29k-dis.c: Fix comments.
1736 Wed Jan 5 11:56:21 1994 David J. Mackenzie (djm@thepub.cygnus.com)
1738 * i960-dis.c (print_insn_i960): Only read word2 if the instruction
1739 needs it, to prevent reading past the end of a section.
1741 Wed Nov 17 17:20:12 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1743 * mips-opc.h: Use macro for j instruction, to support SVR4 PIC.
1744 Removed t,A case for la; always use t,A(b) case.
1746 Mon Nov 8 12:37:36 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1748 From Ted Lemen <mellon@pepper.ncd.com>
1749 * mips-dis.c (print_insn_arg): Handle 'k'.
1750 * mips-opc.c: Make cache use k, not t.
1752 Sun Nov 7 23:52:34 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1754 * alpha-opc.h, alpha-dis.c (print_insn_alpha): Add
1755 FLOAT_MEMORY_FORMAT_CODE, FLOAT_BRANCH_FORMAT_CODE, correct
1756 FLOAT_FORMAT_CODE to put out floating point register names.
1758 Mon Nov 1 18:17:51 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1760 * mips-opc.c: Use macros for jal variants, to support SVR4 PIC.
1762 Thu Oct 28 17:42:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1764 * a29k-dis.c (print_insn): Use 0x%08x, not 0x%8x.
1766 Wed Oct 27 11:48:01 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1768 * mips-opc.c (dsll, dsra, dsrl): Added '>' cases for shift counts
1769 larger than 32. Moved dsxx32 variants first for disassembler.
1771 Mon Oct 25 11:33:14 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
1773 * z8kgen.c, z8k-opc.h: Add full lda information.
1775 Tue Oct 19 12:39:25 1993 Jeffrey A Law (law@cs.utah.edu)
1777 * hppa-dis.c (print_insn_hppa): Do not emit a space after
1778 movb instructions. Any necessary space will be emitted by
1779 the code to handle nullification completers.
1781 Wed Oct 13 16:19:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1783 * mips-opc.c: Moved l.d down so that it disassembles as ldc1.
1785 Fri Oct 8 02:34:21 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1787 * alpha-opc.h: Add ldl_l, fix typo for ldq_u.
1788 * alpha-dis.c (print_insn_alpha): Add code for PAL_FORMAT_CODE.
1790 Tue Oct 5 17:47:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1792 * mips-opc.c: Correct lwu opcode value (book had it wrong).
1794 Thu Sep 30 11:26:18 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
1796 * z8k-dis.c (FETCH_DATA): get just the right amount of data.
1797 (unpack_instr): Cope with ARG_IMM4M1 type instructions.
1799 Wed Sep 29 16:24:49 1993 K. Richard Pixley (rich@sendai.cygnus.com)
1801 * m88k-dis.c (m88kdis): comment change. Remove space after
1803 (printop): handle new arg types DEC and XREG for m88110.
1805 Tue Sep 28 19:20:16 1993 Jeffrey A Law (law@snake.cs.utah.edu)
1807 * hppa-dis.c (print_insn_hppa): Handle 'z' operand
1808 type for absolute branch addresses. Delete special
1809 "ble" and "be" code in 'W' operand code.
1811 Fri Sep 24 14:08:33 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1813 * mips-opc.c: Set hazard information correctly for branch
1814 likely instructions.
1816 Fri Sep 17 04:41:17 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1818 * alpha-dis.c (print_insn_alpha), alpha-opc.h: Fix bugs, use
1819 info->fprintf_func for printing and info->print_address_func for
1822 Wed Sep 15 12:12:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1824 * mips-opc.c: Set INSN_TRAP for tXX instructions.
1826 Thu Sep 9 10:11:27 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1828 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson):
1829 Corrected second case of "b" for disassembler.
1831 Tue Sep 7 14:25:15 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1833 * mips-dis.c, m88k-dis.c: Don't include libbfd.h. Changed calls
1834 to BFD swapping routines to correspond to BFD name changes.
1836 Thu Sep 2 10:35:25 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1838 * mips-opc.c: Change div machine instruction to be z,s,t rather
1839 than s,t. Change div macro to be d,v,t rather than d,s,t.
1840 Likewise for divu, ddiv, ddivu. Added z,s,t case for drem, dremu,
1841 rem and remu which generates only the corresponding div
1842 instruction. This is for compatibility with the MIPS assembler,
1843 which only generates the simple machine instruction when an
1844 explicit destination of $0 is used.
1845 * mips-dis.c (print_insn_arg): Handle 'z' (always register zero).
1847 Thu Aug 26 17:41:44 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1849 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Set
1850 WR_31 hazard for bal, bgezal, bltzal.
1852 Thu Aug 26 17:20:02 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
1854 * hppa-dis.c (print_insn_hppa): Use print function
1855 from within the disassemble_info, not fprintf_filtered.
1857 Wed Aug 25 13:51:40 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
1859 * hppa-dis.c (print_insn_hppa): Handle '|' like '>'. (From Jeff
1860 Law, law@cs.utah.edu.)
1862 Mon Aug 23 12:44:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1864 * mips-opc.c ("absu"): Removed.
1867 Fri Aug 20 10:52:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1869 * mips-opc.c: Added r6000 and r4000 instructions and macros.
1870 Changed hazard information to distinguish between memory load
1871 delays and coprocessor load delays.
1873 Wed Aug 18 15:39:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1875 * mips-opc.c: li.d uses "T,L", not "S,F". Added li.s.
1877 Tue Aug 17 09:44:42 1993 David J. Mackenzie (djm@thepub.cygnus.com)
1879 * configure.in: Don't pass cpu to config.bfd.
1881 Tue Aug 17 12:23:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1883 * m88k-dis.c (m88kdis): Make class unsigned.
1885 Thu Aug 12 15:08:18 1993 Ian Lance Taylor (ian@cygnus.com)
1887 * alpha-dis.c (print_insn_alpha): One branch format case was
1888 missing the instruction name.
1890 Wed Aug 11 19:29:39 1993 David J. Mackenzie (djm@thepub.cygnus.com)
1892 * Makefile.in (ALL_MACHINES): Renamed from DIS_LIBS.
1893 Add the arch-specific auxiliary files.
1894 (OFILES): Remove the arch-specific auxiliary files
1895 and use BFD_MACHINES instead of DIS_LIBS.
1896 * configure.in: Set BFD_MACHINES based on --with-targets option.
1898 Thu Aug 12 12:04:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1900 * mips-opc.c: Added lwc1 E,A(b) to go with lwc1 T,A(b). Similarly
1903 Sun Aug 8 15:09:30 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
1905 * sparc-opc.c: Change CONST to const to deal with gcc
1906 -Dconst=__const -traditional.
1908 Fri Aug 6 10:58:55 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1910 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Took
1911 coprocessor instructions out of #if 0, and made them use new
1914 Thu Aug 5 17:11:06 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
1916 * sparc-dis.c: Include ansidecl.h before opcodes/sparc.h.
1918 Fri Jul 30 18:48:15 1993 John Gilmore (gnu@cygnus.com)
1920 * sparc-opc.c: Add F_JSR, F_UNBR, or F_CONDBR flags to each branch
1921 instruction, for use by the disassembler.
1923 * sparc-dis.c (SEX): Add sign extension macro. Replace many
1924 hand-coded sign extensions that depended on 32-bit host ints.
1925 FIXME, we still depend on big-endian host bitfield ordering.
1926 (sparc_print_insn): Set the insn_info_valid field, and the
1927 other fields that describe the instruction being printed.
1929 Tue Jul 27 17:04:58 1993 Jim Wilson (wilson@sphagnum.cygnus.com)
1931 * sparc-opc.c (call): Accept all 6 addressing modes valid for
1932 `jmp' instead of just one of them.
1934 Wed Jul 21 11:43:32 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
1936 * hppa-dis.c: Move floating registers from reg_names to fp_reg_names.
1937 (fput_fp_reg_r): Renamed from fput_reg_r.
1938 (fput_fp_reg): New function.
1939 (print_insn_hppa): Use fput_fp_reg{,_r} where appropriate.
1941 * hppa-dis.c (print_insn_hppa, cases 'a', 'd'): Print space afterwards.
1943 * hppa-dis.c (print_insn_hppa, case 'd'): Use GET_COND not GET_FIELD.
1945 Mon Jul 19 13:52:21 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
1947 * hppa-dis.c (print_insn_hppa): Use extract_5r_store for 'r'.
1949 * hppa-dis.c (print_insn_hppa, case '>'): If next character is 'n',
1950 don't output a space.
1952 * hppa-dis.c (float_format_names): 10 is undefined, and 11 is quad.
1954 Sun Jul 18 16:30:02 1993 Jim Kingdon (kingdon@rtl.cygnus.com)
1956 * mips-opc.c: New file, containing opcode table from
1957 ../include/opcode/mips.h.
1958 * Makefile.in: Add it.
1960 Thu Jul 15 12:37:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1962 * m88k-dis.c: New file, moved in from gdb and changed to use the
1963 new dis-asm.h disassembler interface.
1964 * Makefile.in (DIS_LIBS): Added m88k-dis.o.
1965 (m88k-dis.o): New target.
1967 Tue Jul 13 10:04:16 1993 Ian Lance Taylor (ian@cygnus.com)
1969 * mips-dis.c (print_insn_arg, _print_insn_mips): Made pointer to
1970 argument string const char * to correspond to opcode/mips.h.
1972 Tue Jul 6 15:18:37 1993 Ian Lance Taylor (ian@cygnus.com)
1974 * mips-dis.c: Updated to account for name changes in new version
1976 * Makefile.in: Added header file dependencies.
1978 Sat Jul 3 23:47:56 1993 Doug Evans (dje@canuck.cygnus.com)
1980 * h8300-dis.c (bfd_h8_disassemble): Correct fetching of instruction.
1982 Thu Jul 1 12:23:38 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
1984 * m68k-dis.c (NEXTWORD, NEXTLONG): Use ((x) ^ 0x8000) - 0x8000 to sign
1985 extend, rather than shifts.
1987 Sun Jun 20 20:56:56 1993 Ken Raeburn (raeburn@poseidon.cygnus.com)
1989 * Makefile.in: Undo 15 June change.
1991 Fri Jun 18 14:15:15 1993 Per Bothner (bothner@deneb.cygnus.com)
1993 * m68k-dis.c (print_insn_arg): Change return value to byte count
1995 * m68k-dis.c: Re-write to detect invalid operands before
1996 printing anything, so we can handle this the same way we
1997 handle invalid opcodes.
1999 Thu Jun 17 15:01:36 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
2001 * sh-dis.c, sh-opc.h: Understand some more opcodes.
2003 Wed Jun 16 13:48:05 1993 Ian Lance Taylor (ian@cygnus.com)
2005 * hppa-dis.c: Include <ansidecl.h> and sysdep.h before other
2008 Tue Jun 15 21:45:26 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
2010 * sparc-dis.c: Don't declare qsort, since sysdep.h might.
2012 * configure.in: Do make sysdep.h link.
2013 * Makefile.in: Search ../include. Don't search ../bfd.
2015 Tue Jun 15 13:36:10 1993 Stu Grossman (grossman@cygnus.com)
2017 Changes from Jeff Law, law@cs.utah.edu:
2018 * hppa-dis.c: Fix typo. 'a' and 'd' were reversed.
2019 Do not print a space before the completers specified by
2022 Fri Jun 11 18:40:21 1993 Ken Raeburn (raeburn@cygnus.com)
2024 * mips-dis.c: No longer need to bomb out if HOST_64_BIT is
2025 defined, since gdb has been fixed.
2027 Changes from Jeff Law, law@cs.utah.edu:
2028 * hppa-dis.c (print_insn_hppa): Last argument to fput_reg,
2029 fput_reg_r, fput_creg, fput_const, and fputs_filtered should
2030 be a *disassemble_info, not a *FILE.
2031 * hppa-dis.c: Support 'd', '!', and 'a'.
2032 * hppa-dis.c: Support 's' to extract a 2 bit space register.
2033 * hppa-dis.c: Delete cases which are no longer needed.
2035 Fri Jun 11 07:53:48 1993 Jim Kingdon (kingdon@cygnus.com)
2037 * m68k-dis.c (print_insn_{m68k,arg}): Add MMU codes.
2039 Tue Jun 8 12:25:01 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
2041 * h8300-dis.c: New file, removed from bfd/cpu-h8300.c, with
2044 Mon Jun 7 12:58:49 1993 Per Bothner (bothner@rtl.cygnus.com)
2046 * Makefile.in (CSEARCH): Add -I../bfd for sysdep.h and bfd.h.
2047 * configure.in: No longer need to configure to get sysdep.h.
2049 Thu Jun 3 15:56:49 1993 Stu Grossman (grossman@cygnus.com)
2051 * Patches from Jeffrey Law <law@cs.utah.edu>.
2052 * hppa-dis.c: Support 'I', 'J', and 'K' in output
2053 templates for 1.1 FP computational instructions.
2055 Tue May 25 13:05:48 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
2057 * h8500-dis.c (print_insn_h8500): Address argument is type
2059 * z8k-dis.c (print_insn_z8k, print_insn_z8001, print_insn_z8002):
2062 * h8500-opc.h (addr_class_type): No comma at end of enumerator.
2063 * sh-opc.h (sh_nibble_type, sh_arg_type): Ditto.
2065 * sparc-dis.c (compare_opcodes): Move static declaration to
2068 Fri May 21 14:17:37 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2070 * sparc-dis.c (print_insn_sparc): Implement 'n' argument for unimp
2071 instruction, remove unimp hack from 'l' argument.
2073 Wed May 19 15:35:54 1993 Stu Grossman (grossman@cygnus.com)
2075 * z8k-dis.c (fetch_data): Use unsigned char to make ancient gcc's
2078 Fri May 14 15:22:46 1993 Ian Lance Taylor (ian@cygnus.com)
2080 * Based on patches from davidj@ICSI.Berkeley.EDU (David Johnson):
2081 * mips-dis.c (print_insn_arg): Handle 'C' for general coprocessor
2084 Fri May 14 00:09:14 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
2086 * hppa-dis.c: Include dis-asm.h before sysdep.h. Changed some
2087 arrays of string pointers to 2-d arrays of chars, to save
2090 Thu May 6 20:51:17 1993 Fred Fish (fnf@cygnus.com)
2092 * a29k-dis.c, alpha-dis.c, i960-dis.c, sparc-dis.c, z8k-dis.c:
2093 Cast second arg to read_memory_func to "bfd_byte *", as necessary.
2095 Tue May 4 20:31:10 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
2097 * hppa-dis.c: New file from Utah, adapted to new disassembler
2099 * Makefile.in: Include it.
2101 Mon Apr 26 18:17:42 1993 Steve Chamberlain (sac@thepub.cygnus.com)
2103 * sh-dis.c, sh-opc.h: New files.
2105 Fri Apr 23 18:51:22 1993 Steve Chamberlain (sac@thepub.cygnus.com)
2107 * alpha-dis.c, alpha-opc.h: New files.
2109 Tue Apr 6 12:54:08 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2111 * mips-dis.c: Sign extend 'j' and 'b' arguments, delta is a signed
2114 Mon Apr 5 17:37:37 1993 John Gilmore (gnu@cygnus.com)
2116 * sparc-dis.c: Make "ta" the default trap instruction, "t" the alias.
2118 Fri Apr 2 07:24:27 1993 Ian Lance Taylor (ian@cygnus.com)
2120 * a29k-dis.c, sparc-dis.c, sparc-opc.c: Use CONST rather than
2123 Thu Apr 1 11:20:43 1993 Jim Kingdon (kingdon@cygnus.com)
2125 * sparc-dis.c: Use fprintf_func a few places where I forgot,
2126 and double percent signs a few places.
2128 * a29k-dis.c, i960-dis.c: New, merged from gdb and binutils.
2130 * i386-dis.c, m68k-dis.c, mips-dis.c, sparc-dis.c:
2131 Use info->print_address_func not print_address.
2133 * dis-buf.c (generic_print_address): New function.
2135 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
2137 * Makefile.in: Add sparc-dis.c.
2138 sparc-dis.c: New file, merges binutils and gdb versions as follows:
2140 Add `add' instruction to the set that get checked
2141 for a preceding `sethi' in order to print an absolute address.
2142 * (print_insn): Disassembly prefers real instructions.
2143 (is_delayed_branch): Speed up.
2144 * sparc-opcode.h: Add ALIAS bit to aliases. Fix up opcode tables.
2145 Still missing some float ops, and needs testing.
2146 * sparc-pinsn.c (print_insn): Eliminate 'set' test, subsumed by
2147 F_ALIAS. Use printf, not fprintf, when not passing a file
2149 (compare_opcodes): Check that identical instructions have
2150 identical opcodes, complain otherwise.
2153 * Include reg_names.
2155 Use dis-asm.h/read_memory_func interface.
2157 Wed Mar 31 20:49:06 1993 K. Richard Pixley (rich@rtl.cygnus.com)
2159 * h8500-dis.c, i386-dis.c, m68k-dis.c, z8k-dis.c (fetch_data):
2160 deliberately return non-zero to setjmp from longjmp. Otherwise
2161 this code fails to compile.
2163 Wed Mar 31 17:04:31 1993 Stu Grossman (grossman@cygnus.com)
2165 * m68k-dis.c: Fix prototype for fetch_arg().
2167 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
2169 * dis-buf.c: New file, for new read_memory_func interface.
2170 Makefile.in (OFILES): Include it.
2171 m68k-dis.c, i386-dis.c, h8500-dis.c, mips-dis.c, z8k-dis.c:
2172 Use new read_memory_func interface.
2174 Mon Mar 29 14:02:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
2176 * h8500-dis.c (print_insn_h8500): Get sign of fp offsets right.
2177 * h8500-opc.h: Fix couple of opcodes.
2179 Wed Mar 24 02:03:36 1993 david d `zoo' zuhn (zoo at poseidon.cygnus.com)
2181 * Makefile.in: add dvi & installcheck targets
2183 Mon Mar 22 18:55:04 1993 John Gilmore (gnu@cygnus.com)
2185 * Makefile.in: Update for h8500-dis.c.
2187 Fri Mar 19 14:27:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
2189 * h8500-dis.c, h8500-opc.h: New files
2191 Thu Mar 18 14:12:37 1993 Per Bothner (bothner@rtl.cygnus.com)
2193 * mips-dis.c, z8k-dis.c: Converted to use interface defined in
2194 ../include/dis-asm.h.
2195 * m68k-dis.c: New file (merge of ../binutils/m68k-pinsn.c
2196 and ../gdb/m68k-pinsn.c).
2197 * i386-dis.c: New file (merge of ../binutils/i386-pinsn.c
2198 and ../gdb/i386-pinsn.c).
2199 * m68881-ext.c: New file. Moved definition of
2200 ext_format ext_format_68881 from ../gdb/m68k-tdep.c.
2201 * Makefile.in: Adjust for new files.
2202 * i386-dis.c: Patches from John Hassey (hassey@dg-rtp.dg.com).
2203 * m68k-dis.c: Recognize '9' placement code, so (say) pflush
2204 can be dis-assembled.
2206 Wed Feb 17 09:19:47 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
2208 * mips-dis.c (print_insn_arg): Now returns void.
2210 Mon Jan 11 16:09:16 1993 Fred Fish (fnf@cygnus.com)
2212 * mips-dis.c (ansidecl.h): Include for benefit of sysdep.h
2213 files that use the macros.
2215 Thu Jan 7 13:15:17 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2217 * mips-dis.c: New file, from gdb/mips-pinsn.c.
2218 * Makefile.in (DIS_LIBS): Added mips-dis.o.
2219 (CFILES): Added mips-dis.c.
2221 Thu Jan 7 07:36:33 1993 Steve Chamberlain (sac@thepub.cygnus.com)
2223 * z8k-dis.c (print_insn_z8001, print_insn_z8002): new routines
2224 * z8kgen.c, z8k-opc.h: fix sizes of some shifts.
2226 Tue Dec 22 15:42:44 1992 Per Bothner (bothner@rtl.cygnus.com)
2228 * Makefile.in: Improve *clean rules.
2229 * configure.in: Allow a default host.
2231 Tue Nov 17 19:53:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
2233 * Makefile.in: also use -I$(srcdir)/../bfd, since some sysdep
2234 files include other sysdep files
2236 Thu Nov 12 16:10:37 1992 Steve Chamberlain (sac@thepub.cygnus.com)
2238 * z8k-dis.c z8k-opc.h z8kgen.c: checkpoint
2240 Fri Oct 9 04:56:05 1992 John Gilmore (gnu@cygnus.com)
2242 * configure.in: For host support, use ../bfd/configure.host
2243 so it stays in sync with the ../bfd/hosts database.
2245 Thu Oct 1 23:38:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
2247 * configure.in: use cpu-vendor-os triple instead of nested cases
2249 Wed Sep 30 16:09:20 1992 Michael Werner (mtw@cygnus.com)
2251 * z8k-dis.c (unparse_instr): fix bug where opcode returned was
2252 *always* the wrong one.
2254 Wed Sep 30 07:42:17 1992 Steve Chamberlain (sac@thepub.cygnus.com)
2256 * z8kgen.c: added copyright info
2258 Tue Sep 29 12:20:21 1992 Steve Chamberlain (sac@thepub.cygnus.com)
2260 * z8k-dis.c (unparse_instr): prettier tabs
2261 * z8kgen.c -> z8k-opc.h: bug fixes in tables
2263 Fri Sep 25 12:50:32 1992 Stu Grossman (grossman at cygnus.com)
2265 * configure.in: Add ncr* configuration.
2266 * z8k-dis.c (struct instr_data_s): Make instr_asmsrc char to make
2267 picayune ANSI compilers happy.
2269 Sep 20 08:50:55 1992 Fred Fish (fnf@cygnus.com)
2271 * configure.in (i386): Make i386 and i486 synonymous for now.
2272 * configure.in (i[34]86-*-sysv4): Add my_host definition.
2274 Fri Sep 18 17:01:23 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
2276 * Makefile.in (install): Fix typo.
2278 Fri Sep 18 02:04:24 1992 John Gilmore (gnu@cygnus.com)
2280 * Makefile.in (make): Remove obsolete crud.
2281 (sparc-opc.o): Avoid Sun Make VPATH bug.
2283 Tue Sep 8 17:29:27 1992 K. Richard Pixley (rich@sendai.cygnus.com)
2285 * Makefile.in: since there are no SUBDIRS, remove rule and
2286 references of subdir_do.
2288 Tue Sep 8 17:02:58 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
2290 * Makefile.in (install): Get the library name right here too.
2291 Don't install bfd.h, since it's unrelated to this library. No
2292 subdirs to recurse into, either.
2293 (CFILES): The source file has a .c suffix, not .o.
2295 * sparc-opc.c: New file, moved from BFD.
2296 * Makefile.in (OFILES): Build it.
2298 Thu Sep 3 16:59:20 1992 Michael Werner (mtw@cygnus.com)
2300 * z8k-dis.c: fixed forward refferences of some declarations.
2302 Mon Aug 31 16:09:45 1992 Michael Werner (mtw@cygnus.com)
2304 * Makefile.in: get the name of the library right
2306 Mon Aug 31 13:47:35 1992 Steve Chamberlain (sac@thepub.cygnus.com)
2308 * z8k-dis.c: knows how to disassemble z8k stuff
2309 * z8k-opc.h: new file full of z8000 opcodes
2313 version-control: never