opcodes/ChangeLog

   1 2001-11-12  Niraj Gupta <ngupta@zumanetworks.com>
   2
   3         * m68k-opc.c: Fix definitions of wddata[bwl].
   4
   5 2001-11-09  Richard Sandiford  <rsandifo@redhat.com>
   6
   7         * cgen-asm.c (cgen_parse_keyword): If the keyword is too big to
   8         fit in the buffer, try to match the empty keyword.
   9
  10 2001-11-09  Nick Clifton  <nickc@cambridge.redhat.com>
  11
  12         * cgen-ibld.in (extract_1): Fix badly placed #if 0.
  13         * fr30-ibld.c: Regenerate.
  14         * m32r-ibld.c: Regenerate.
  15         * openrisc-ibld.c: Regenerate.
  16
  17 2001-11-04  Chris Demetriou  <cgd@broadcom.com>
  18
  19         * mips-dis.c (print_insn_mips): Remove spaces at end of line.
  20
  21 2001-11-02  Nick Clifton  <nickc@cambridge.redhat.com>
  22
  23         * configure.in (ALL_LINGUAS): Add "fr", "sv" and "tr".
  24         * configure: Regernate.
  25         * po/fr.po: New file.
  26         * po/sv.po: New file.
  27         * po/tr.po: New file.
  28
  29 2001-11-01  Stephane Carrez  <Stephane.Carrez@worldnet.fr>
  30
  31         * m68hc11-dis.c (print_insn): Fix disassembly of movb with a
  32         constant as source.
  33
  34 2001-10-30  Hans-Peter Nilsson  <hp@bitrange.com>
  35
  36         * Makefile.am (CFILES): Add mmix-dis.c and mmix-opc.c.  Regenerate
  37         dependencies.
  38         * Makefile.in: Regenerate.
  39         * mmix-dis.c, mmix-opc.c: New files.
  40
  41 2001-10-29  Kazu Hirata  <kazu@hxi.com>
  42
  43         * d30v-dis.c: Fix a comment typo.
  44
  45 2001-10-23  Chris Demetriou  <cgd@broadcom.com>
  46
  47         * mips-opc.c (mips_builtin_opcodes): Mark "bgezall" and
  48         "bltzall" as writing GPR 31 (since they do).
  49
  50         * mips-dis.c (print_insn_arg): Calculate info->target
  51         where appropriate.
  52         (print_insn_mips): Fill in instruction info.
  53         (print_mips16_insn_arg): Remove unneded variable 'val'.
  54         Removed duplicated instruction target calculations,
  55         calculate once and print that result.  Use same idiom for
  56         masking the jump segment bits as is used in print_insn_arg.
  57
  58 2001-10-20  Alan Modra  <amodra@bigpond.net.au>
  59
  60         * ppc-opc.c (CT): Make it an optional operand.
  61
  62 2001-10-17  Chris Demetriou  <cgd@broadcom.com>
  63
  64         * mips-dis.c (mips_isa_type): Make the ISA used to disassemble
  65         SB-1 binaries include instructions specific to the SB-1.
  66         * mips-opc.c (SB1): New definition.
  67         (mips_builtin_opcodes): Add SB-1 extension opcodes "div.ps",
  68         "recip.ps", "rsqrt.ps", and "sqrt.ps".
  69
  70 2001-10-17  matthew green  <mrg@redhat.com>
  71
  72         * ppc-opc.c (STRM): New AltiVec operand.
  73         (XDSS): New AltiVec instruction form.
  74         (mtvscr): Correct operand list.
  75         (dst, dstt, dstst, dststt, dss, dssall): AltiVec instructions.
  76
  77 2001-10-17  Alan Modra  <amodra@bigpond.net.au>
  78
  79         * po/POTFILES.in: Regenerate.
  80
  81 2001-10-13  matthew green  <mrg@redhat.com>
  82
  83         * ppc-opc.c (MO): New macro for MO field of mbar instruction.
  84         (powerpc_opcodes): Add rfci, wrtee, wrteei, mfdcrx, mfdcr,
  85         mtdcrx, mtdcr, msync, dcba and mbar as BookE instructions.
  86
  87 2001-10-13  Nick Clifton  <nickc@cambridge.redhat.com>
  88
  89         * cgen-ibld.in: Include safe-ctype.h in preference to
  90         ctype.h.
  91         * cgen-asm.in: Include safe-ctype.h in preference to
  92         ctype.h.  Fix formatting.  Use ISSPACE instead of isspace and
  93         TOLOWER instead of tolower.
  94         (@arch@_cgen_build_insn_regex): Remove duplication of syntax
  95         string elements in constructed regular expression.
  96         * fr30-asm.c: Regenerate.
  97         * fr30-desc.c: Regenerate.
  98         * fr30-ibld.c: Regenerate.
  99         * m32r-asm.c: Regenerate.
 100         * m32r-desc.c: Regenerate.
 101         * m32r-ibld.c: Regenerate.
 102         * openrisc-asm.c: Regenerate.
 103         * openrisc-desc.c: Regenerate.
 104         * openrisc-ibld.c: Regenerate.
 105         * po/opcodes.pot: Regenerate.
 106
 107 2001-10-12  matthew green  <mrg@redhat.com>
 108
 109         * ppc-opc.c (insert_de, extract_de, insert_des, extract_des): New
 110         instruction field instruction/extraction functions for new BookE
 111         DE form instructions.
 112         (CT): New macro for CT field in an X form instruction.
 113         (DE, DES, DEO, DE_MASK): New macros for DE/DES fields in DE form
 114         instructions.
 115         (PPC64): Don't include PPC_OPCODE_PPC.
 116         (403): New opcode macro for PPC403 processors.
 117         (BOOKE): New opcode macro for BookE processors.
 118         (bce, bcel, bcea, bcela, bclre, bclrel: New BookE instructions.
 119         (bcctre, bcctrel, be, bel, bea, bela, icbt, icbte, lwzxe): Likewise.
 120         (dcbste, lwzuxe, luxe, dcbfe, lbzxe, lwarxe, lbzuxe): Likewise.
 121         (stwcxe, stwxe, stxe, stwuxe, stuxe, stbxe, dcbtste, stbuxe): Likewise.
 122         (mfapidi, dcbte, lhzxe, lhzuxe, lhaxe, lhauxe, subfe64): Likewise.
 123         (subfeo64, adde64, addeo64, sthxe, sthuxe, subfze64): Likewise.
 124         (subfzeo64, addze64, addzeo64, dcbie, subfme64, subfmeo64): Likewise.
 125         (addme64, addmeo64, stdcxe., mcrxr64, lwbrxe, lfsxe, lfsuxe): Likewise.
 126         (lfdxe, lfduxe, stwbrxe, stfsxe, stfsuxe, stfdxe, dcbae): Likewise.
 127         (stfduxe, tlbivax, tlbivaxe, lhbrxe, ldxe, lduxe, tlbsx): Likewise.
 128         (tlbsxe, sthbrxe, stdxe, stduxe, icbie, stfiwxe, dcbze, lbze): Likewise.
 129         (lbzue, ldue, lhze, lhzue, lhae, lhaue, lwze, lwzue): Likewise.
 130         (stbe, stbue, sthe, sthue, stwe, stwue, lfse, lfsue, lfde): Likewise.
 131         (lfdue, stde, stdue, stfse, stfsue, stfde, stfdue): Likewise.
 132
 133         * ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc): Look
 134         for a disassembler option of `booke', `booke32' or `booke64' to enable
 135         BookE support in the disassembler.
 136
 137 2001-10-12  John Healy  <jhealy@redhat.com>
 138
 139         * cgen-dis.in (print_insn): Use min (cd->base_insn_bitsize, buflen*8)
 140         for the length when extracting the base part of the insn.
 141
 142 2001-10-09  Bruno Haible  <haible@clisp.cons.org>
 143
 144         * cgen-asm.in (*_cgen_build_insn_regex): Generate a case sensitive
 145         regular expression.  Fix some formatting problems.
 146         * fr30-asm.c: Regenerate.
 147         * openrisc-asm.c: Regenerate.
 148         * m32r-asm.c: Regenerate.
 149
 150 2001-10-09  Christian Groessler <cpg@aladdin.de>
 151
 152         * z8k-dis.c (unparse_instr): Fixed formatting. Change disassembly
 153         of indirect register memory accesses to be same format the
 154         assembler accepts.
 155
 156 2001-10-09  Nick Clifton  <nickc@cambridge.redhat.com>
 157
 158         * sh-opc.h: Fix encoding of least significant nibble of the
 159         DSP single data transfer instructions.
 160
 161         * sh-dis.c (print_insn_shx): Fix decoding of As opcode in DSP
 162         instructions.
 163
 164 2001-10-08  Nick Clifton  <nickc@cambridge.redhat.com>
 165
 166         * cgen-asm.in: Fix compile time warning messages in generated
 167         C files.
 168         * cgen-dis.in: The same.
 169         * cgen-ibld.in: The same.
 170         * fr30-asm.c: Regenerate.
 171         * fr30-desc.c: Regenerate.
 172         * fr30-dis.c: Regenerate.
 173         * fr30-ibld.c: Regenerate.
 174         * fr30-opc.c: Regenerate.
 175         * m32r-asm.c: Regenerate.
 176         * m32r-desc.c: Regenerate.
 177         * m32r-dis.c: Regenerate.
 178         * m32r-ibld.c: Regenerate.
 179         * m32r-opc.c: Regenerate.
 180         * m32r-opinst.c Regenerate.
 181         * openrisc-asm.c: Regenerate.
 182         * openrisc-desc.c: Regenerate.
 183         * openrisc-dis.c: Regenerate.
 184         * openrisc-ibld.c: Regenerate.
 185         * openrisc-opc.c: Regenerate.
 186         * openrisc-opc.h: Regenerate.
 187         * Makefile.in: Regenerate.
 188         * po/POTFILES.in: Regenerate.
 189         * po/opcodes.pot: Regenerate.
 190
 191 2001-10-08  Aldy Hernandez  <aldyh@redhat.com>
 192
 193         * arm-opc.h (arm_opcodes): Add cirrus insns.
 194
 195         * arm-dis.c (print_insn_arm): Add 'I' case.
 196
 197 2001-10-03  Alan Modra  <amodra@bigpond.net.au>
 198
 199         * po/POTFILES.in: Regenerate.
 200         * configure: Regenerate.
 201
 202 2001-10-02  Alan Modra  <amodra@bigpond.net.au>
 203
 204         * Makefile.am (Makefile): Depend on bfd/configure.in.
 205         Run "make dep-am".
 206         * Makefile.in: Regenerate.
 207
 208 2001-09-30  John Healy  <jhealy@redhat.com>
 209
 210         * cgen-ibld.in (insert_1): Switched bfd_get_bits and bfd_set_bits
 211         calls to cgen_get_insn_value and cgen_put_insn_value calls.
 212         (extract_1): Switched bfd_get_bits call to cgen_get_insn_value call.
 213
 214 2001-09-30  Hans-Peter Nilsson  <hp@bitrange.com>
 215
 216         * Makefile.am: Update dependencies with "make dep-am".
 217         * Makefile.in: Regenerate.
 218
 219 2001-09-26  Alan Modra  <amodra@bigpond.net.au>
 220
 221         * arc-dis.c: Formatting fixes.
 222         (my_sprintf): Define using VPARAMS, VA_OPEN, VA_FIXEDARG, VA_CLOSE.
 223
 224 2001-09-21  Bruno Haible  <haible@clisp.cons.org>
 225
 226         * arc-dis.c: Don't include <ctype.h>.
 227         * openrisc-desc.c: Likewise.
 228         * openrisc-ibld.c: Likewise.
 229
 230 2001-09-20  Nick Clifton  <nickc@cambridge.redhat.com>
 231
 232         * fr30-opc.c: Fix compile time warning messages.
 233         * i370-opc.c: Fix compile time warning messages.
 234         * i960-dis.c: Fix compile time warning messages.
 235         * m32r-asm.c: Fix compile time warning messages.
 236         * m32r-desc.c: Fix compile time warning messages.
 237         * m32r-dis.c: Fix compile time warning messages.
 238         * m32r-ibld.c: Fix compile time warning messages.
 239         * m32r-opc.c: Fix compile time warning messages.
 240         * m32r-opinst.c: Fix compile time warning messages.
 241         * ns32k-dis.c: Fix compile time warning messages.
 242         * openrisc-asm.c: Fix compile time warning messages.
 243         * openrisc-desc.c: Fix compile time warning messages.
 244         * openrisc-dis.c: Fix compile time warning messages.
 245         * openrisc-ibld.c: Fix compile time warning messages.
 246         * openrisc-opc.c: Fix compile time warning messages.
 247         * pdp11-dis.c: Fix compile time warning messages.
 248         * tic54x-dis.c: Fix compile time warning messages.
 249         * v850-opc.c: Fix compile time warning messages.
 250         * vax-dis.c: Fix compile time warning messages.
 251         * w65-opc.h: Fix compile time warning messages.
 252         * z8k-opc.h: Fix compile time warning messages.
 253         * z8kgen.c: Fix compile time warning messages.
 254
 255 2001-09-19  Nick Clifton  <nickc@cambridge.redhat.com>
 256
 257         * arm-dis.c:   Fix compile time warning messages.
 258         * cgen-asm.c:  Fix compile time warning messages.
 259         * cgen-dis.c:  Fix compile time warning messages.
 260         * cris-dis.c:  Fix compile time warning messages.
 261         * d10v-dis.c:  Fix compile time warning messages.
 262         * fr30-asm.c:  Fix compile time warning messages.
 263         * fr30-desc.c: Fix compile time warning messages.
 264         * fr30-dis.c:  Fix compile time warning messages.
 265         * fr30-ibld.c: Fix compile time warning messages.
 266
 267 2001-09-18  Bruno Haible  <haible@clisp.cons.org>
 268
 269         * cgen-asm.c: Include "safe-ctype.h" instead of <ctype.h>.
 270         (cgen_parse_keyword): Use ISALNUM instead of isalnum.
 271         * cgen-opc.c: Include "safe-ctype.h" instead of <ctype.h>.
 272         (cgen_keyword_lookup_name): Use ISALPHA/TOLOWER instead of
 273         isalpha/tolower.
 274         (cgen_keyword_add): Use ISALNUM instead of isalnum.
 275         (hash_keyword_name): Use TOLOWER instead of tolower.
 276         * fr30-asm.c: Include "safe-ctype.h" instead of <ctype.h>.
 277         (parse_insn_normal): Use TOLOWER/ISSPACE instead of
 278         tolower/isspace.
 279         (fr30_cgen_assemble_insn): Use ISSPACE instead of isspace.
 280         * fr30-desc.c: Don't include <ctype.h>.
 281         * fr30-ibld.c: Likewise.
 282         * ia64-gen.c: Include "safe-ctype.h" instead of <ctype.h>.
 283         (load_insn_classes, parse_resource_users, load_depfile): Use
 284         ISSPACE instead of isspace.
 285         * m32r-asm.c: Include "safe-ctype.h" instead of <ctype.h>.
 286         (parse_insn_normal): Use TOLOWER/ISSPACE instead of
 287         tolower/isspace.
 288         (m32r_cgen_assemble_insn): Use ISSPACE instead of isspace.
 289         * m32r-desc.c: Don't include <ctype.h>.
 290         * m32r-ibld.c: Likewise.
 291         * openrisc-asm.c: Include "safe-ctype.h" instead of <ctype.h>.
 292         (parse_insn_normal): Use TOLOWER/ISSPACE instead of
 293         tolower/isspace.
 294         (openrisc_cgen_assemble_insn): Use ISSPACE instead of isspace.
 295
 296 2001-09-18  Martin Schwidefsky <schwidefsky@de.ibm.com>
 297
 298         * Makefile.am: Add rules and dependencies to create the s/390 opcode
 299         table out of s390-opc.txt automatically.
 300         * configure.in: Add BFD_CC_FOR_BUILD to allow CC_FOR_BUILD to be used.
 301         * s390-mkopc.c (dumpTable): Change output to create a complete file.
 302         * s390-opc.c: New improved opcode format macros and remove the
 303         pregenerated opcode table.
 304         * s390-opc.txt: Adapt to new improved opcode format macros.
 305
 306 2001-09-14  David Schleef <ds@schleef.org>
 307
 308         * ppc-opc.c (VXA, VXA_MASK): Fix mask bits.
 309
 310 2001-09-04  Alan Modra  <amodra@bigpond.net.au>
 311
 312         * i386-dis.c (grps): Don't print the implicit al/ax/eax register
 313         for opcode 0xf6 or 0xf7 forms of mul, imul, div, idiv insns.
 314
 315 2001-08-31  Eric Christopher  <echristo@redhat.com>
 316             Jason Eckhardt    <jle@redhat.com>
 317
 318         * mips-dis.c: Add support for bfd_mach_mipsisa32 and
 319         bfd_mach_mipsisa64. Remove bfd_mach_mips32, bfd_mach_mips32_4k,
 320         bfd_mach_mips64.
 321
 322 2001-08-31  Andreas Jaeger  <aj@suse.de>
 323
 324         * tic54x-opc.c: Add default initializers to avoid warnings.
 325
 326         * arc-opc.c: Include "sysdep.h" to get stdio.h as include file.
 327         * arc-ext.c: Likewise.
 328
 329 2001-08-28  matthew gren  <mrg@redhat.com>
 330
 331         * ppc-opc.c (icbt): Order correctly.
 332
 333 2001-08-27  David Edelsohn  <dje@watson.ibm.com>
 334             Torbjorn Granlund  <tege@swox.com>
 335
 336         * ppc-opc.c (DS): Add PPC_OPERAND_DS flag.
 337         (LS): Define.
 338         (insert_ds): Complain if not a multiple of 4.
 339         (XSYNC): Define.
 340         (XSYNC_MASK): Define.
 341         (powerpc_opcodes): Add "slbmte", "lwsync", "ptesync", "slbmfev",
 342         "slbmfee".  Modify "sync" to use XSYNC_MASK and LS.
 343
 344 2001-08-26  Andreas Jaeger  <aj@suse.de>
 345
 346         * h8500-opc.h: Add default initializers to h8500_table to shut up
 347         GCC warnings.
 348
 349 2001-08-25  Andreas Jaeger  <aj@suse.de>
 350
 351         * tic54x-dis.c: Add unused attributes where needed.
 352
 353         * z8k-dis.c (output_instr): Add unused attribute.
 354
 355         * h8300-dis.c: Add missing prototypes.
 356         (bfd_h8_disassemble): Make static.
 357
 358         * cris-dis.c: Add missing prototype.
 359         * h8500-dis.c: Likewise.
 360         * m68hc11-dis.c: Likewise.
 361         * pj-dis.c: Likewise.
 362         * tic54x-dis.c: Likewise.
 363         * v850-dis.c: Likewise.
 364         * vax-dis.c: Likewise.
 365         * w65-dis.c: Likewise.
 366         * z8k-dis.c: Likewise.
 367
 368         * d10v-dis.c: Add missing prototype.
 369         (dis_long): Remove unused variable.
 370         (dis_2_short): Likewise.
 371
 372         * sh-dis.c: Add missing prototypes.
 373         * v850-opc.c: Likewise.
 374         Add unused attributes where needed.
 375
 376         * ns32k-dis.c: Add missing prototypes.
 377         (bit_extract_simple): Remove unused variable.
 378
 379 2001-08-23  Martin Schwidefsky  <schwidefsky@de.ibm.com>
 380
 381         * opcodes/s390-opc.c: Add "low or high" and "not low or high"
 382         branch instructions for gcc 3.0.
 383         * opcodes/s390-opc.txt: Likewise.
 384
 385 2001-08-21  Andreas Jaeger  <aj@suse.de>
 386
 387         * i960-dis.c: Add parameters for prototypes
 388         (ctrl): Add unused attributes.
 389         (cobr): Likewise.
 390         (put_abs): Likewise.
 391
 392         * mips-dis.c: Add missing prototypes.
 393         * a29k-dis.c: Likewise.
 394         * arc-dis.c: Likewise.
 395         * ia64-opc.c: Likewise.
 396
 397         * s390-dis.c: Add missing prototypes.
 398         (init_disasm): Remove unused attribute since the parameter is
 399         used.
 400
 401 2001-08-16  Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
 402
 403         * mips-opc.c (M1): Define. Reformatted Code.
 404         (mips_builtin_opcodes): Added performance counter opcodes mfpc, mfps,
 405         mtps, mtps. Typo.
 406
 407 2001-08-16  Jonathan Larmour  <jlarmour@redhat.com>
 408
 409         * mips-opc.c: R3900s can support all branch likely INSN_MACROs where
 410         the corresponding non-likely insn is in MIPS I.
 411
 412 2001-08-13  Kazu Hirata  <kazu@hxi.com>
 413
 414         * mcore-dis.c: Fix formatting.
 415         * mips-dis.c: Likewise.
 416         * pj-dis.c: Likewise.
 417         * z8k-dis.c: Likewise.
 418
 419 2001-08-12  Richard Henderson  <rth@redhat.com>
 420
 421         * cgen-ibld.in (extract_normal): Match type of VALUE and MASK
 422         to *VALUEP.  Regenerate all cgen files.
 423
 424 2001-08-10  Richard Sandiford  <rsandifo@redhat.com>
 425
 426         * mips-dis.c (print_insn_mips): Remove OPCODE_IS_MEMBER's gp32
 427         argument.
 428         * mips-opc.c (G6): Undefine.
 429         (mips_builtin_opcodes): Remove gp32 entry for "move".  Add macro
 430         as the first "move" alternative.
 431
 432 2001-08-10  Andreas Jaeger  <aj@suse.de>
 433
 434         * configure.in: Add -Wstrict-prototypes and -Wmissing-prototypes
 435         to build warnings.
 436         * configure: Regenerate.
 437
 438 2001-08-10  Alan Modra  <amodra@bigpond.net.au>
 439
 440         * ppc-opc.c: Revert 2001-08-08.
 441
 442 2001-08-09  Alan Modra  <amodra@bigpond.net.au>
 443
 444         * dis-buf.c (generic_strcat_address): Add missing prototype.
 445         #if 0 the functions as it is unused.
 446
 447 2001-08-08  Alan Modra  <amodra@bigpond.net.au>
 448
 449         1999-10-25  Torbjorn Granlund  <tege@swox.com>
 450         * ppc-opc.c: Include "bfd.h".
 451         (powerpc_operands): Add new field for reloc type.
 452
 453 2001-07-21  Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
 454
 455         * mips-dis.c (print_insn_arg): Don't use software integer registers
 456         for coprocessor registers.
 457         (get_mips_isa): Removed.
 458         (is_newabi): New function, checks if NewABI is used.
 459         (_print_insn_mips): Get distinction between old ABI and new ABI right.
 460
 461 2001-08-01  Christian Groessler <cpg@aladdin.de>
 462
 463         * z8kgen.c: Fixed indentation of opt[] array.  Include stdio.h to
 464         get stderr definition.
 465         (internal, gas): Removed warnings.
 466         (gas): Create a correct final entry for created array.
 467         * z8k-opc.h: Recreated with new z8kgen.
 468
 469 2001-07-28  Kazu Hirata  <kazu@hxi.com>
 470
 471         * i386-dis.c: Fix formatting.
 472
 473 2001-07-28  Matthias Kramm <kramm@quiss.org>
 474
 475         * i386-dis.c: Change formatting conventions for architecture
 476         i386:intel to better match the format of various intel i386
 477         assemblers, like nasm, tasm or masm.
 478
 479 2001-07-24  Alan Modra  <amodra@bigpond.net.au>
 480
 481         * Makefile.am: Update dependencies with "make dep-am".
 482         * Makefile.in: Regenerate
 483
 484 2001-07-24  Kazu Hirata  <kazu@hxi.com>
 485
 486         * alpha-dis.c: Fix formatting.
 487         * cris-dis.c: Likewise.
 488         * d10v-dis.c: Likewise.
 489         * d30v-dis.c: Likewise.
 490         * m10300-dis.c: Likewise.
 491         * tic54x-dis.c: Likewise.
 492
 493 2001-07-23  Kazu Hirata  <kazu@hxi.com>
 494
 495         * m68k-dis.c: Fix formatting.
 496         * pj-dis.c: Likewise.
 497         * s390-dis.c: Likewise.
 498         * z8k-dis.c: Likewise.
 499
 500 2001-07-21  Chris Demetriou  <cgd@broadcom.com>
 501
 502         * mips-opc.c (mips_builtin_opcodes): Sort c.le.s and c.lt.s
 503         into the rest of the surrounding definitions.
 504
 505 2001-07-18  Alan Modra  <amodra@bigpond.net.au>
 506
 507         * i386-dis.c (grps): Print l or w suffix, and require mem modrm
 508         for lgdt, lidt, sgdt, sidt.
 509
 510 2001-07-13  Philip Blundell  <philb@gnu.org>
 511
 512         * arm-dis.c (print_insn_arm): Use decimal for offsets in LDR/STR.
 513
 514 2001-07-12  Jeff Johnston  <jjohnstn@redhat.com>
 515
 516         * cgen-asm.in: Include "xregex.h" always to enable the libiberty
 517         regex support.
 518         (@arch@_cgen_build_insn_regex): New routine from Graydon.
 519         (@arch@_cgen_assemble_insn): Add Graydon's code to use regex
 520         to verify if it is worth parsing the insn as insn "x".  Also update
 521         error message when insn is not a recognized format of the insn vs
 522         when the insn is completely unrecognized.
 523
 524 2001-07-11  Frank Ch. Eigler  <fche@redhat.com>
 525
 526         * cgen-dis.in (print_insn): Use cgen_get_insn_value instead of
 527         bfd_get_bits.
 528         * cgen-opc.c (cgen_get_insn_value, cgen_put_insn_value): Respect
 529         non-zero CGEN_CPU_DESC->insn_chunk_bitsize.
 530
 531 2001-07-09  Andreas Jaeger  <aj@suse.de>, Karsten Keil <kkeil@suse.de>
 532
 533         * i386-dis.c (set_op): Handle 64 bit and 32 bit mode.
 534         (OP_J): Use bfd_vma for mask to work properly with 64 bits.
 535         (op_address,op_riprel): Use bfd_vma to handle 64 bits.
 536
 537 2001-07-05  Ben Elliston  <bje@redhat.com>
 538
 539         * Makefile.am (CPUDIR): Define.
 540         (stamp-m32r): Update dependencies.
 541         (stamp-fr30): Ditto.
 542         (stamp-openrisc): Ditto.
 543         * Makefile.in: Regenerate.
 544
 545 2001-07-03  Zoltan Hidvegi <hzoli@hzoli.2y.net>
 546
 547         * ppc-opc.c: Fix encoding of 'clf' instruction.
 548
 549 2001-06-30  Geoffrey Keating  <geoffk@redhat.com>
 550
 551         * cgen-ibld.in (insert_normal): Support CGEN_IFLD_SIGN_OPT.
 552
 553 2001-06-28  Geoffrey Keating  <geoffk@redhat.com>
 554
 555         * cgen-asm.c (cgen_parse_keyword): Allow any first character.
 556         * cgen-opc.c (cgen_keyword_add): Ignore special first
 557         character when building nonalpha_chars field.
 558
 559 2001-06-24  Ben Elliston  <bje@redhat.com>
 560
 561         * m88k-dis.c: Format to conform to GNU coding standards.
 562
 563 2001-06-23  Andreas Jaeger  <aj@suse.de>
 564
 565         * disassemble.c (disassembler_usage): Add unused attribute.
 566
 567 2001-06-22  Eric Christopher  <echristo@redhat.com>
 568
 569         * mips-opc.c: Move prefx to start of the table.
 570
 571 2001-06-22  Stacey Sheldon <ssheldon@Catena.com>
 572
 573         * arc-opc.c (insert_st_syntax): Fix over-optimisation of ST
 574         instruction.
 575
 576 2001-06-22  Pauli <pauli@moreton.com.au>
 577
 578         * m68k-opc.c: Add wdebug instruction.
 579
 580 2001-06-15  Aldy Hernandez  <aldyh@redhat.com>
 581
 582         * m10300-opc.c (mn10300_opcodes): Change opcode for AM33 subc.
 583
 584 2001-06-14  Geoffrey Keating  <geoffk@redhat.com>
 585
 586         * cgen-asm.c (cgen_parse_keyword): When looking for the
 587         boundaries of a keyword, allow any special characters
 588         that are actually in one of the allowed keyword.
 589         * cgen-opc.c (cgen_keyword_add): Add any special characters
 590         to the nonalpha_chars field.
 591
 592 2001-06-12  Martin Schwidefsky <schwidefsky@de.ibm.com>
 593
 594         * s390-opc.c: Add lgh instruction.
 595         * s390-opc.txt: Likewise.
 596
 597 2001-06-11  Alan Modra  <amodra@bigpond.net.au>
 598
 599         * i386-dis.c: Group function prototypes in one place.
 600         (FLOATCODE): Redefine as 1.
 601         (USE_GROUPS): Redefine as 2.
 602         (USE_PREFIX_USER_TABLE): Redefine as 3.
 603         (X86_64_SPECIAL): Define as 4.
 604         (GRP1b..GRPAMD): Move USE_GROUPS to bytecode1, index to bytecode2.
 605         (PREGRP0..PREGRP26): Similarly with USE_PREFIX_USER_TABLE.
 606         (dis386_att, dis386_intel, disx86_64_att, disx86_64_intel): Delete.
 607         (dis386): New table combining above four tables.
 608         (dis386_twobyte_att, dis386_twobyte_intel): Delete.
 609         (dis386_twobyte): New table combining above two tables.
 610         (x86_64_table): New table to handle x86_64.
 611         (X86_64_0): Define.
 612         (float_mem_att, float_mem_intel): Delet.
 613         (float_mem): New table combining above two tables.
 614         (print_insn_i386): Modify for above.
 615         (dofloat): Likewise.
 616         (putop): Handle '{', '|' and '}' to select alternative mnemonics.
 617         Return 0 on success, 1 if no valid alternative.
 618         (putop <case 'F'>, <case 'H'>): Print nothing for intel_syntax.
 619         (putop <case 'T'>): Move to case 'U', and share case 'Q' code.
 620         (putop <case 'I'>): Move to case 'T', and share case 'P' code.
 621         (OP_REG <case rAX_reg .. rDI_reg>): Handle as for eAX_reg .. eDI_reg
 622         if not 64-bit mode.
 623         (OP_I <case q_mode>): Handle as for v_mode if not 64-bit mode.
 624         (OP_I64): If not 64-bit mode, call OP_I.
 625         OP_OFF64): If not 64-bit mode, call OP_OFF.
 626         (OP_ST, OP_STi, OP_SEG, OP_DIR, OP_OFF, OP_OFF64, OP_MMX): Rename
 627         'ignore'/'ignored' to 'bytemode'.
 628
 629 2001-06-10  Alan Modra  <amodra@bigpond.net.au>
 630
 631         * configure.in: Sort 'ta' case statement.
 632         * configure: Regenerate.
 633
 634         * i386-dis.c (dis386_att): Add 'H' to conditional branch and
 635         loop,jcxz insns.
 636         (disx86_64_att): Likewise.
 637         (dis386_twobyte_att): Likewise.
 638         (print_insn_i386): Don't print branch hints as a prefix.
 639         (putop): 'H' macro prints branch hints.
 640         (get64): Kill compile warnings.
 641
 642 2001-06-09  Alexandre Oliva  <aoliva@redhat.com>
 643
 644         * sh-opc.h (sh_table): Don't use empty initializers.
 645
 646 2001-06-06  Christian Groessler <cpg@aladdin.de>
 647
 648         * z8k-dis.c: Fix formatting.
 649         (unpack_instr): Remove unused cases in switch statement. Add
 650         safety abort() in default case.
 651         (unparse_instr): Add safety abort() in default case.
 652
 653 2001-06-06  Peter Jakubek <pjak@snafu.de>
 654
 655         * m68k-dis.c (print_insn_m68k): Fix typo.
 656         * m68k-opc.c (m68k_opcodes): Correct allowed operands for
 657         mcf (ColdFire) div, rem and moveb instructions.
 658
 659 2001-06-06  Alan Modra  <amodra@bigpond.net.au>
 660
 661         * i386-dis.c (cond_jump_flag, loop_jcxz_flag): Define.
 662         (cond_jump_mode, loop_jcxz_mode): Define.
 663         (dis386_att): Add cond_jump_flag and loop_jcxz_flag as
 664         appropriate, and 'F' suffix to loop insns.
 665         (disx86_64_att): Likewise.
 666         (dis386_twobyte_att): Likewise.
 667         (print_insn_i386): Don't output addr prefix for loop, jcxz insns.
 668         Output data size prefix for long conditional jumps.  Output cs and
 669         ds branch hints.
 670         (putop): Handle 'F', and mark PREFIX_ADDR used for case 'E'.
 671         (OP_J): Don't make PREFIX_DATA used.
 672
 673 2001-06-04  Alexandre Oliva  <aoliva@redhat.com>
 674
 675         * sh-opc.h (sh_table): Complete last element entry to avoid
 676         compiler warning.
 677
 678 2001-05-16  Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
 679
 680         * mips-dis.c (mips_isa_type): Add MIPS r12k support.
 681
 682 2001-05-23  Alan Modra  <amodra@one.net.au>
 683
 684         * arc-opc.c: Whitespace changes.
 685
 686 2001-05-18  Hans-Peter Nilsson  <hp@axis.com>
 687
 688         * cris-opc.c (cris_spec_regs): Add missing initializer field for
 689         last element.
 690
 691 2001-05-15  Frank Ch. Eigler  <fche@redhat.com>
 692
 693         * cgen-dis.in (extract_normal): Complete support for min<base case.
 694
 695 2001-05-15  Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
 696
 697         * mips-dis.c (INSNLEN): Rename MAXLEN.
 698         (std_reg_names): Replace by mips32_reg_names and mips64_reg_names.
 699         (print_insn_arg): Remove $ prefix of register names.
 700         (set_mips_isa_type): Remove.
 701         (mips_isa_type): New function.
 702         (get_mips_isa): New Function.
 703         (print_insn_mips): Rename _print_insn_mips.
 704         (_print_insn_mips): New function, contains code which was
 705         duplicated in print_insn_big_mips and print_insn_little_mips.
 706         (print_insn_big_mips): Moved code to _print_insn_mips.
 707         (print_insn_little_mips): Likewise.
 708         (print_mips16_insn_arg): Remove $ prefix of register names.
 709         Print error message before abort.
 710
 711 2001-05-14  J.T. Conklin  <jtc@redback.com>
 712
 713         * ppc-opc.c (powerpc_opcodes): Fixed extended opcode field of
 714         simplified mnemonics used for setting PPC750-specific special
 715         purpose registers.
 716
 717 2001-05-12  H.J. Lu  <hjl@gnu.org>
 718
 719         * i386-dis.c (print_insn_i386): Always set `mod', `reg' and
 720         `rm'.
 721
 722 2001-05-12  Peter Targett  <peter.targett@arccores.com>
 723
 724         * arc-opc.c (arc_reg_names): Correct attribute for lp_count
 725         register to r/w.  Formatting fixes throughout file.
 726
 727 2001-05-12  Alan Modra  <amodra@one.net.au>
 728
 729         * i386-dis.c (prefix_user_table): Correct movq2dq, movdq2q, and
 730         movq operands.
 731         (twobyte_has_modrm): Update table.
 732         (need_modrm): Give it file scope.
 733         (MODRM_CHECK): Define.
 734         (dofloat): Use MODRM_CHECK.
 735         (OP_E): Likewise.
 736         (OP_EM): Likewise.
 737         (OP_EX): Likewise.
 738
 739 2001-05-07  Frank Ch. Eigler  <fche@redhat.com>
 740
 741         * cgen-dis.in (default_print_insn): Tolerate min<base instructions
 742         even at end of a section.
 743         * cgen-ibld.in (extract_normal): Tolerate min!=base!=max instructions
 744         by ignoring precariously-unpacked insn_value in favor of raw buffer.
 745
 746 2001-05-03  Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
 747
 748         * disassemble.c (disassembler_usage): Remove unused attribute.
 749
 750 2001-05-04  Frank Ch. Eigler  <fche@redhat.com>
 751
 752         * m32r-dis.c, -asm.c, -ibld.c: Regenerated with disassembler fixes.
 753
 754 2001-05-04  Frank Ch. Eigler  <fche@redhat.com>
 755
 756         * cgen-dis.in (print_insn): Remove call to read_insn.  Instead,
 757         assume incoming buffer already has the base insn loaded.  Handle
 758         smaller-than-base instructions for variable-length case.
 759
 760 2001-05-04  Alan Modra  <amodra@one.net.au>
 761
 762         * i386-dis.c (Ev, Ed): Remove duplicate define.
 763         (Gd): Define.
 764         (XS): Define.
 765         (OP_XS): New function.
 766         (dis386_twobyte_att): Correct pinsrw, pextrw, pmovmskb, and
 767         movmskp operands.
 768         (dis386_twobyte_intel): Likewise.
 769         (prefix_user_table): Use MS for maskmovq operand.
 770
 771 2001-04-27  Johan Rydberg  <jrydberg@opencores.org>
 772
 773         * Makefile.am: Add OpenRISC target.
 774         * Makefile.in: Regenerated.
 775
 776         * disassemble.c (disassembler): Recognize the OpenRISC disassembly.
 777
 778         * configure.in (bfd_openrisc_arch): Add target.
 779         * configure: Regenerated.
 780
 781         * openrisc-asm.c: New file.
 782         * openrisc-desc.c: Likewise.
 783         * openrisc-desc.h: Likewise.
 784         * openrisc-dis.c: Likewise.
 785         * openrisc-ibld.c: Likewise.
 786         * openrisc-opc.c: Likewise.
 787         * openrisc-opc.h: Likewise.
 788
 789 2001-04-24  Christian Groessler  <cpg@aladdin.de>
 790
 791         * z8k-dis.c: add names of control registers (ctrl_names);
 792         (seg_length): provides instruction length fixup for segmented
 793         mode; (unpack_instr): correctly handle ARG_DISP16, ARG_DISP12,
 794         CLASS_0DISP7, CLASS_1DISP7, CLASS_DISP8 and CLASS_PR cases;
 795         (unparse_intr): handle CLASS_PR, print addresses without '#'
 796         * z8k-opc.h: re-created with new z8kgen
 797         * z8kgen.c: merged in fixes which were in existing z8k-opc.h; new
 798         entries for ldctl/ldctlb instruction
 799
 800 2001-04-06  Andreas Jaeger  <aj@suse.de>
 801
 802         * i386-dis.c: Add ffreep instruction.
 803
 804 2001-03-30  Alexandre Oliva  <aoliva@redhat.com>
 805
 806         * ppc-opc.c (insert_mbe): Shift mask initializer as long.
 807
 808 2001-03-24  Alan Modra  <alan@linuxcare.com.au>
 809
 810         * i386-dis.c (PREGRP25): Define.
 811         (dis386_twobyte_att): Use here in place of "movntq" entry.
 812         (dis386_twobyte_intel): Likewise.
 813         (prefix_user_table): Add PREGRP25 entry for "movntq" and "movntdq".
 814         (PREGRP26): Define.
 815         (dis386_twobyte_att): Use here.
 816         (dis386_twobyte_intel): Likewise.
 817         (prefix_user_table): Add PREGRP26 entry for "punpcklqdq".
 818         (prefix_user_table <maskmovdqu>): XM operand, not MX.
 819         (prefix_user_table): Cosmetic changes to "bad" entries.
 820
 821 2001-03-23  Nick Clifton  <nickc@redhat.com>
 822
 823         * mips-opc.c: Remove extraneous whitespace.
 824         * mips-dis.c: Remove extraneous whitespace.
 825
 826 2001-03-22  Ben Elliston  <bje@redhat.com>
 827
 828         * cgen-asm.in (@arch@_cgen_assemble_insn): Move tmp_errmsg
 829         declaration inside CGEN_VERBOSE_ASSEMBLER_ERRORS conditional.
 830         * cgen-ibld.in (put_insn_int_value): Mark cd parameter as unused
 831         to allay a compiler warning.
 832
 833 2001-03-22  Alan Modra  <alan@linuxcare.com.au>
 834
 835         * i386-dis.c (dis386_twobyte_att): Add entries for paddq, psubq.
 836         (dis386_twobyte_intel): Likewise.
 837         (twobyte_has_modrm): Set entry for paddq, psubq.
 838
 839 2001-03-20  Patrick Macdonald  <patrickm@redhat.com>
 840
 841         * cgen-dis.in (print_insn_@arch@): Add support for target machine
 842         determination via CGEN_COMPUTE_MACH.
 843         * fr30-desc.c: Regenerate.
 844         * fr30-dis.c: Regenerate.
 845         * fr30-opc.h: Regenerate.
 846         * m32r-desc.c: Regenerate.
 847         * m32r-dis.c: Regenerate.
 848         * m32r-opc.h: Regenerate.
 849         * m32r-opinst.c: Regenerate.
 850
 851 2001-03-20  H.J. Lu  <hjl@gnu.org>
 852
 853         * configure.in: Remove the redundent AC_ARG_PROGRAM.
 854         * configure: Rebuild.
 855
 856 2001-03-19  Jim Wilson  <wilson@redhat.com>
 857
 858         * ia64-gen.c (fetch_insn_class): If xsect, then ignore comment and
 859         notestr if larger than xsect.
 860         (in_class): Handle format M5.
 861         * ia64-asmtab.c: Regnerate.
 862
 863 2001-03-19  John David Anglin  <dave@hiauly1.hia.nrc.ca>
 864
 865         * vax-dis.c (print_insn_vax): Only fetch two bytes if the info buffer
 866         has more than one byte left to read.
 867
 868 2001-03-16  Martin Schwidefsky  <schwidefsky@de.ibm.com>
 869
 870         * s390-opc.c: Add new opcodes.  Smooth out formatting.
 871         * s390-opc.txt: Add new opcodes.
 872
 873 2001-03-06  Nick Clifton  <nickc@redhat.com>
 874
 875         * arm-dis.c (print_insn_thumb): Compute destination address
 876         of BLX(1) instruction by taking bit 1 from PC and not from bit
 877         0 of the offset.
 878
 879 2001-03-06  Igor Shevlyakov  <igor@windriver.com>
 880
 881         * m68k-dis.c (print_insn_m68k): Recognize Coldfire CPUs
 882         so command line switches will work.
 883
 884 2001-03-05  Dave Brolley  <brolley@redhat.com>
 885
 886         * fr30-asm.c: Regenerate.
 887         * fr30-desc.c: Regenerate.
 888         * fr30-desc.h: Regenerate.
 889         * fr30-dis.c: Regenerate.
 890         * fr30-ibld.c: Regenerate.
 891         * fr30-opc.c: Regenerate.
 892         * fr30-opc.h: Regenerate.
 893         * m32r-asm.c: Regenerate.
 894         * m32r-desc.c: Regenerate.
 895         * m32r-desc.h: Regenerate.
 896         * m32r-dis.c: Regenerate.
 897         * m32r-ibld.c: Regenerate.
 898         * m32r-opc.c: Regenerate.
 899         * m32r-opc.h: Regenerate.
 900         * m32r-opinst.c: Regenerate.
 901
 902 2001-02-28  Igor Shevlyakov  <igor@windriver.com>
 903
 904         * m68k-opc.c: fix cpushl according to Motorola. Enable
 905         bunch of instructions for Coldfire 5407 and add all new.
 906
 907 2001-02-27  Alan Modra  <alan@linuxcare.com.au>
 908
 909         * configure.in (BFD_VERSION): Do without grep.
 910         * configure: Regenerate.
 911         * Makefile.am: Run "make dep-am".
 912         * Makefile.in: Regenerate.
 913
 914 2001-02-23  David Mosberger  <davidm@hpl.hp.com>
 915
 916         * ia64-opc-a.c: Add missing pseudo-ops for "cmp" and "cmp4".
 917         * ia64-asmtab.c: Regenerate.
 918
 919 2001-02-21  David Mosberger  <davidm@hpl.hp.com>
 920
 921         * ia64-opc-d.c (ia64_opcodes_d): Break the "add" pattern into two
 922         separate variants: one for IMM22 and the other for IMM14.
 923         * ia64-asmtab.c: Regenerate.
 924
 925 2001-02-21  Greg McGary  <greg@mcgary.org>
 926
 927         * cgen-opc.c (cgen_get_insn_value): Add missing `return'.
 928
 929 2001-02-20  H.J. Lu  <hjl@gnu.org>
 930
 931         * Makefile.am (ia64-ic.tbl): Remove the target.
 932         (ia64-raw.tbl): Likewise.
 933         (ia64-waw.tbl): Likewise.
 934         (ia64-war.tbl): Likewise.
 935         (ia64-asmtab.c): Generate it in the source directory.
 936         * Makefile.in: Regenerated.
 937
 938 2001-02-18  lars brinkhoff  <lars@nocrew.org>
 939
 940         * Makefile.am: Add PDP-11 target.
 941         * configure.in: Likewise.
 942         * disassemble.c: Likewise.
 943         * pdp11-dis.c: New file.
 944         * pdp11-opc.c: New file.
 945
 946 2001-02-14  Jim Wilson  <wilson@redhat.com>
 947
 948         * ia64-ic.tbl: Update from Intel.  Add setf to fr-writers.
 949         * ia64-asmtab.c: Regenerate.
 950
 951 Mon Feb 12 17:41:26 CET 2001  Jan Hubicka  <jh@suse.cz>
 952
 953         * i386-dis.c (prefix_user_t): Add 'Y' to SSE ineger converison
 954         instructions.
 955         (putop): Handle 'Y'
 956
 957 2001-02-11  Maciej W. Rozycki  <macro@ds2.pg.gda.pl>
 958
 959         * mips-dis.c (print_insn_arg): Use top four bits of the address of
 960         the following instruction not of the jump itself for the jump
 961         target.
 962         (print_mips16_insn_arg): Likewise.
 963
 964 2001-02-11  Michael Sokolov  <msokolov@ivan.Harhan.ORG>
 965
 966         * Makefile.am (stamp-lib): ranlib the libopcodes.a in the build
 967         directory.
 968         * Makefile.in: Regenerate.
 969
 970 2001-02-09  Schwidefsky  <schwidefsky@de.ibm.com>
 971
 972         * Makefile.am: Add linux target for S/390.
 973         * Makefile.in: Likewise.
 974         * configure.in: Likewise.
 975         * disassemble.c: Likewise.
 976         * s390-dis.c: New file.
 977         * s390-mkopc.c: New file.
 978         * s390-opc.c: New file.
 979         * s390-opc.txt: New file.
 980
 981 2001-02-05  Jim Wilson  <wilson@redhat.com>
 982
 983         * ia64-asmtab.c: Revert 2000-12-16 change.
 984
 985 2001-02-02  Patrick Macdonald  <patrickm@redhat.com>
 986
 987         * fr30-desc.h: Regenerate with CGEN_MAX_SYNTAX_ELEMENTS.
 988         * m32r-desc.h: Regenerate.
 989
 990 Thu Feb  1 16:29:06 MET 2001  Jan Hubicka  <jh@suse.cz>
 991
 992         * i386-dis.c (dis386_att, grps): Use 'T' for push/pop
 993         (putop): Handle 'T', alphabetize order, fix 'I' handling in Intel syntax
 994
 995 2001-01-14  Alan Modra  <alan@linuxcare.com.au>
 996
 997         * hppa-dis.c (print_insn_hppa): Handle '>' and '<' arg types.
 998
 999 2001-01-13  Nick Clifton  <nickc@redhat.com>
1000
1001         * disassemble.c: Remove spurious white space.
1002
1003 Sat Jan 13 01:48:24 MET 2001  Jan Hubicka  <jh@suse.cz>
1004
1005         * i386-dis.c (dis386_att, disx86_64_att): Fix ret, lret and iret
1006         templates.
1007
1008 2001-01-11  Peter Targett  <peter.targett@arccores.com>
1009
1010         * configure.in: Add arc-ext.lo for bfd_arc_arch selection.
1011         * Makefile.am (C_FILES): Add arc-ext.c.
1012         (ALL_MACHINES) Add arc-ext.lo.
1013         (INCLUDES) Add opcode directory to list.
1014         New dependency entry for arc-ext.lo.
1015         * disassemble.c (disassembler): Correct call to
1016         arc_get_disassembler.
1017         * arc-opc.c: New update for ARC, including full base
1018         instructions for ARC variants.
1019         * arc-dis.h, arc-dis.c: New update for ARC, including
1020         extensibility functionality.
1021         * arc-ext.h, arc-ext.c: New files for handling extensibility.
1022
1023 2001-01-10  Jan Hubicka  <jh@suse.cz>
1024
1025         * i386-dis.c (PREGRP15 - PREGRP24): New.
1026         (dis386_twobyt): Add SSE2 instructions.
1027         (twobyte_uses_SSE_prefix: Rename from ... ; add new SSE instructions.
1028         (twobyte_uses_f3_prefix): ... this one.
1029         (grps): Add SSE instructions.
1030         (prefix_user_table): Add two new slots; add SSE2 instructions.
1031         (print_insn_i386): Rename uses_f3_prefix to uses_SSE_prefix;
1032         Handle the REPNZ and Data16 prefixes as well; do proper lookup
1033         to prefix_user_table.
1034         (OP_E): Accept mfence and lfence as well.
1035         (OP_MMX): Data16 prefix turns MMX to SSE; support REX extensions.
1036         (OP_XMM): Support REX extensions.
1037         (OP_EM): Likewise.
1038         (OP_EX): Likewise.
1039
1040 2001-01-09  Nick Clifton  <nickc@redhat.com>
1041
1042         * arm-dis.c (print_insn): Set pc to zero for instructions with
1043         a reloc associated with them.
1044
1045 2001-01-09  Jeff Johnston  <jjohnstn@redhat.com>
1046
1047         * cgen-asm.in (parse_insn_normal): Changed syn to be
1048         CGEN_SYNTAX_CHAR_TYPE.  Changed all references to *syn
1049         as character to use CGEN_SYNTAX_CHAR macro and all comparisons
1050         to '\0' to use 0 instead.
1051         * cgen-dis.in (print_insn_normal): Ditto.
1052         * cgen-ibld.in (insert_insn_normal, extract_insn_normal): Ditto.
1053
1054 2001-01-05  Jan Hubicka  <jh@suse.cz>
1055
1056         * i386-dis.c: Add x86_64 support.
1057         (rex): New static variable.
1058         (REX_MODE64, REX_EXTX, REX_EXTY, REX_EXTZ): New constants.
1059         (USED_REX): New macro.
1060         (Ev, Ed, Rm, Iq, Iv64, Cm, Dm, Rm*, Ob64, Ov64): New macros.
1061         (OP_I64, OP_OFF64, OP_IMREG): New functions.
1062         (OP_REG, OP_OFF): Declare.
1063         (get64, get32, get32s): New functions.
1064         (r??_reg): New constants.
1065         (dis386_att): Change templates of instruction implicitly promoted
1066         to 64bit; change e?? to RMe?? for unwind RM byte instructions.
1067         (grps): Likewise.
1068         (dis386_intel): Likewise.
1069         (dixx86_64_att): New table based on dis386_att.
1070         (dixx86_64_intel): New table based on dis386_intel.
1071         (names64, names8rex): New global variable.
1072         (names32, names16): Add extended registers.
1073         (prefix_user_t): Recognize rex prefixes.
1074         (prefix_name): Print REX prefixes nicely.
1075         (op_riprel): New global variable.
1076         (start_pc): Set type to bfd_vma.
1077         (print_insn_i386): Detect the 64bit mode and use proper table;
1078         move ckprefix after initializing the buffer; output unused rex prefixes;
1079         output information about target of RIP relative addresses.
1080         (putop): Support 'O' and 'I'. Update handling of "P', 'Q', 'R' and 'S';
1081         (print_operand_value): New function.
1082         (OP_E, OP_G, OP_REG, OP_I, OP_J, OP_DIR, OP_OFF, OP_D): Add support for
1083         REX prefix and new modes.
1084         (get64, get32s): New.
1085         (get32): Return bfd_signed_vma type.
1086         (set_op): Initialize the op_riprel.
1087         * disassemble.c (disassembler): Recognize the x86-64 disassembly.
1088
1089 2001-01-03  Richard Sandiford  <r.sandiford@redhat.com>
1090
1091          cgen-dis.in (read_insn): Use bfd_get_bits()
1092
1093 2001-01-02  Richard Sandiford  <rsandifo@redhat.com>
1094
1095         * cgen-dis.c (hash_insn_array): Use bfd_put_bits().
1096         (hash_insn_list): Likewise
1097         * cgen-ibld.in (insert_1): Use bfd_put_bits() and bfd_get_bits().
1098         (extract_1): Use bfd_get_bits().
1099         (extract_normal): Apply sign extension to both extraction
1100         methods.
1101         * cgen-opc.c (cgen_get_insn_value): Use bfd_get_bits()
1102         (cgen_put_insn_value): Use bfd_put_bits()
1103
1104 2000-12-28  Frank Ch. Eigler  <fche@redhat.com>
1105
1106         * cgen-asm.in (parse_insn_normal): Print better error message for
1107         instructions with missing operands.
1108
1109 2000-12-21  Santeri Paavolainen <santtu@ssh.com>
1110
1111         * cgen-opc.c: Include alloca.h if HAVE_ALLOCA_H is defined.
1112
1113 2000-12-16  Nick Clifton  <nickc@redhat.com>
1114
1115         * Makefile.in: Regenerate.
1116         * aclocal.m4: Regenerate.
1117         * config.in: Regenerate.
1118         * configure.in: Add spacing.
1119         * configure: Regenerate.
1120         * ia64-asmtab.c: Regenerate.
1121         * po/opcodes.pot: Regenerate.
1122
1123 2000-12-12  Frank Ch. Eigler  <fche@redhat.com>
1124
1125         * cgen-asm.in (@arch@_cgen_assemble_insn): Prefer printing insert-time
1126         error messages over later parse-time ones.
1127
1128 2000-12-12  Jim Wilson  <wilson@redhat.com>
1129
1130         * ia64-dis.c (print_insn_ia64): Cast away const on ia64_free_opcode
1131         argument.
1132         * ia64-gen.c (insert_deplist): Cast sizeof result to int.
1133         (print_dependency_table): Print NULL if semantics field not set.
1134         (insert_opcode_dependencies): Mark cmp parameter as unused.
1135         (print_main_table): Use fprintf_vma to print long long fields.
1136         (main): Mark argv paramter as unused.  Convert to old style definition.
1137         * ia64-opc.c (ia64_find_dependency): Cast sizeof result to int.
1138         * ia64-asmtab.c: Regnerate.
1139
1140 2000-12-09  Nick Clifton  <nickc@redhat.com>
1141
1142         * m32r-dis.c (print_insn): Prevent re-read of instruction from
1143         wrong address.
1144
1145         * fr30-dis.c: Regenerate.
1146
1147 2000-12-08  Peter Targett  <peter.targett@arccores.com>
1148
1149         * configure.in: Add arc-ext.lo for bfd_arc_arch selection.
1150         * Makefile.am (C_FILES): Add arc-ext.c.
1151         (ALL_MACHINES) Add arc-ext.lo.
1152         (INCLUDES) Add opcode directory to list.
1153         New dependency entry for arc-ext.lo.
1154         * disassemble.c (disassembler): Correct call to
1155         arc_get_disassembler.
1156         * arc-opc.c: New update for ARC, including full base
1157         instructions for ARC variants.
1158         * arc-dis.h, arc-dis.c: New update for ARC, including
1159         extensibility functionality.
1160         * arc-ext.h, arc-ext.c: New files for handling extensibility.
1161
1162 2000-12-03  Chris Demetriou   cgd@sibyte.com
1163
1164         * mips-opc.c (mips_builtin_opcodes): Use the WR_HILO, RD_HILO,
1165         MOD_HILO, and MOD_LO macros.
1166
1167         * mips-opc.c (M1, M2): Delete.
1168         (mips_builtin_opcodes): Remove all uses of M1.
1169
1170         * mips-opc.c (mips_builtin_opcodes): Make the dmfc2 and dmtc2
1171         instructions take "G" format second operands and use the
1172         correct flags.
1173         There are mfc3 and mtc3 opcodes, so add dmfc3 and dmtc3 opcodes to
1174         match.
1175         Delete "sel" code operands from mfc1 and mtc1.
1176         Add MIPS64 opcode changes (dclo, dclz), and "sel" code variants
1177         for dm[ft]c[023].
1178
1179 2000-12-03  Ed Satterthwaite  ehs@sibyte.com  and
1180             Chris Demetriou   cgd@sibyte.com
1181
1182         * mips-opc.c (mips_builtin_opcodes): Finish additions
1183         for MIPS32 support, and clean up existing entries for
1184         aesthetics, consistency with the MIPS32 ISA, and
1185         with consistency the rest of the table.
1186
1187 2000-12-01  Nick Clifton  <nickc@redhat.com>
1188
1189         * mips16-opc.c (mips16_opcodes): Add initialiser for membership
1190         field.
1191
1192 2000-12-01  Chris Demetriou <cgd@sibyte.com>
1193
1194         mips-dis.c (print_insn_arg): Handle new 'U' and 'J' argument
1195         specifiers.  Update 'B' for new constant names, and remove
1196         'm'.
1197         mips-opc.c (mips_builtin_opcodes): Place "pref" and "ssnop"
1198         near the top of the array, so they are disassembled properly.
1199         Enable "ssnop" for MIPS32.  Add "break" variant with 20 bit
1200         code for MIPS32.  Update "clo" and "clz" to use 'U' operand
1201         specifier.  Add 'H' format specifier variants for "mfc1,"
1202         "mfc2," "mfc3," "mtc1," "mtc2," and "mtc3" for MIPS32.  Update
1203         MIPS32 "sdbbp" to use 'B' operand specifier.  Add MIPS32
1204         "wait" variant which uses 'J' operand specifier.
1205
1206         * mips-dis.c (set_mips_isa_type): Update to use
1207         CPU_UNKNOWN and ISA_* constants.  Add bfd_mach_mips32 case.
1208         Replace bfd_mach_mips4K with bfd_mach_mips32_4k case.
1209         * mips-opc.c (I32): New constant for instructions added in
1210         MIPS32.
1211         (P4): Delete.
1212         (mips_builtin_opcodes) Replace all uses of P4 with I32.
1213
1214         * mips-dis.c (set_mips_isa_type): Add cases for
1215         bfd_mach_mips5 and bfd_mach_mips64.
1216         * mips-opc.c (I64): New definitions.
1217
1218         * mips-dis.c (set_mips_isa_type): Add case for
1219         bfd_mach_mips_sb1.
1220
1221 2000-11-28  Hans-Peter Nilsson  <hp@bitrange.com>
1222
1223         * sh-dis.c (print_insn_ddt): Make insn_x, insn_y unsigned.
1224         (print_insn_ppi): Make nib1, nib2, nib3 unsigned.
1225         Initialize variable dc to NULL.
1226         (print_insn_shx): Remove unused label d_reg_n.
1227
1228 2000-11-24  Nick Clifton  <nickc@redhat.com>
1229
1230         * arm-opc.h: Add new opcode formatting parameter 'B'.
1231         (arm_opcodes): Add XScale, v5, and v5te instructions.
1232         (thumb_opcodes): Add v5t instructions.
1233
1234         * arm-dis.c (print_insn_arm): Handle new 'B' format
1235         parameter.
1236         (print_insn_thumb): Decode BLX(1) instruction.
1237
1238 2000-11-21  Chris Demetriou  <cgd@sibyte.com>
1239
1240         * mips-opc.c: Fix file header comment.
1241
1242 2000-11-14  Hans-Peter Nilsson  <hp@axis.com>
1243
1244         * cris-dis.c (cris_get_disassembler): If abfd is NULL, return
1245         print_insn_cris_with_register_prefix.
1246
1247 2000-11-11  Alexandre Oliva  <aoliva@redhat.com>
1248
1249         * sh-opc.h: The operand of `mov.w r0, (<disp>,GBR)' is IMM1, not 0.
1250
1251 2000-11-07  Matthew Green  <mrg@redhat.com>
1252
1253         * cgen-dis.in (print_insn): All insns which can fit into insn_value
1254         must be loaded there in their entirety.
1255
1256 2000-10-20  Jakub Jelinek  <jakub@redhat.com>
1257
1258         * sparc-dis.c (v9a_asr_reg_names): Add v9b ASRs.
1259         (compute_arch_mask): Add v8plusb and v9b machines.
1260         (print_insn_sparc): siam mode decoding, accept ASRs up to 25.
1261         * sparc-opc.c: Support for Cheetah instruction set.
1262         (prefetch_table): Add #invalidate.
1263
1264 2000-10-16  Nick Clifton  <nickc@redhat.com>
1265
1266         * mcore-dis.c (imsk): Change mask for OC to 0xFE00.
1267
1268 2000-10-06  Dave Brolley  <brolley@redhat.com>
1269
1270         * fr30-desc.h: Regenerate.
1271         * m32r-desc.h: Regenerate.
1272         * m32r-ibld.c: Regenerate.
1273
1274 2000-10-05  Jim Wilson  <wilson@redhat.com>
1275
1276         * ia64-ic.tbl: Update from Intel.
1277         * ia64-asmtab.c: Regenerate.
1278
1279 2000-10-04  Kazu Hirata  <kazu@hxi.com>
1280
1281         * ia64-gen.c: Convert C++-style comments to C-style comments.
1282         * tic54x-dis.c: Likewise.
1283
1284 2000-09-29  Hans-Peter Nilsson  <hp@axis.com>
1285
1286         Changes to add dollar prefix to registers for files where user symbols
1287         don't have a leading underscore.  Fix formatting.
1288         * cris-dis.c (REGISTER_PREFIX_CHAR): New.
1289         (format_reg): Add parameter with_reg_prefix.  All callers changed.
1290         (print_with_operands): Ditto.
1291         (print_insn_cris_generic): Renamed from print_insn_cris, add
1292         parameter with_reg_prefix.
1293         (print_insn_cris_with_register_prefix,
1294         print_insn_cris_without_register_prefix, cris_get_disassembler):
1295         New.
1296         * disassemble.c (disassembler) [ARCH_cris]: Call cris_get_disassembler.
1297
1298 2000-09-22  Jim Wilson  <wilson@redhat.com>
1299
1300         * ia64-opc-f.c (ia64_opcodes_f): Add fpcmp pseudo-ops for
1301         gt, ge, ngt, and nge.
1302         * ia64-asmtab.c: Regenerate.
1303
1304         * ia64-dis.c (print_insn_ia64): Revert Aug 7 byte skip count change.
1305         * ia64-gen.c (parse_semantics): Handle IA64_DVS_STOP.
1306         (lookup_specifier): Handle "PR%, 1 to 15" and "PR%, 16 to 62".
1307         * ia64-ic.tbl, ia64-raw.tbl, ia64-war.tbl, ia64-waw.tbl: Update.
1308         * ia64-asmtab.c: Regnerate.
1309
1310 2000-09-13  Anders Norlander  <anorland@acc.umu.se>
1311
1312         * mips-opc.c (mips_builtin_opcodes): Support cache instruction on 4K cores.
1313         Add mfc0 and mtc0 with sub-selection values.
1314         Add clo and clz opcodes.
1315         Add msub and msubu instructions for MIPS32.
1316         Add madd/maddu aliases for mad/madu for MIPS32.
1317         Support wait, deret, eret, movn, pref for MIPS32.
1318         Support tlbp, tlbr, tlbwi, tlbwr.
1319         (P4): New define.
1320
1321         * mips-dis.c (print_insn_arg): Print sdbbp 'm' args.
1322         (print_insn_arg): Handle 'H' args.
1323         (set_mips_isa_type): Recognize 4K.
1324         Use CPU_* defines instead of hardcoded numbers.
1325
1326 2000-09-11  Catherine Moore <clm@redhat.com>
1327
1328         * d30v-opc.c (d30v_operand_t): New operand type Rb2.
1329         (d30v_format_tab): Use Rb2 for modinc and moddec.
1330
1331 2000-09-07  Catherine Moore  <clm@redhat.com>
1332
1333         * d30v-opc.c (d30v_format_tab): Use format Ra for
1334         modinc and moddec.
1335
1336 2000-09-06  Alexandre Oliva  <aoliva@redhat.com>
1337
1338         * configure: Rebuilt with new libtool.m4.
1339
1340 2000-09-05  Nick Clifton  <nickc@redhat.com>
1341
1342         * configure: Regenerate.
1343         * po/opcodes.pot: Regenerate.
1344
1345 2000-08-31  Alexandre Oliva  <aoliva@redhat.com>
1346
1347         * acinclude.m4: Include libtool and gettext macros from the
1348         top level.
1349         * aclocal.m4, configure: Rebuilt.
1350
1351 2000-08-30  Kazu Hirata  <kazu@hxi.com>
1352
1353         * tic80-dis.c: Fix formatting.
1354
1355 2000-08-29  Kazu Hirata  <kazu@hxi.com>
1356
1357         * w65-dis.c: Fix formatting.
1358
1359 2000-08-28  Mark Hatle  <mhatle@mvista.com>
1360
1361         * ppc-opc.c: Add XTLB macro for a few PPC 4xx extended mnemonics.
1362         (powerpc_opcodes): Add table entries for PPC 405 instructions.
1363         Changed rfci, icbt, mfdcr, dccci, mtdcr, iccci from PPC to PPC403
1364         instructions.  Added extended mnemonic mftbl as defined in the
1365         405GP manual for all PPCs.
1366
1367 2000-08-28  Jim Wilson  <wilson@redhat.com>
1368
1369         * ia64-dis.c (print_insn_ia64): Add failed label after ia64_free_opcode
1370         call.  Change last goto to use failed instead of done.
1371
1372 2000-08-28  Dave Brolley  <brolley@redhat.com>
1373
1374         * cgen-ibld.in (cgen_put_insn_int_value): New function.
1375         (insert_normal): Allow for non-zero word_offset with CGEN_INT_INSN_P.
1376         (insert_insn_normal): Use cgen_put_insn_int_value with CGEN_INT_INSN_P.
1377         (extract_normal): Allow for non-zero word_offset with CGEN_INT_INSN_P.
1378         * cgen-dis.in (read_insn): New static function.
1379         (print_insn): Use read_insn to read the insn into the buffer and set
1380         up for disassembly.
1381         (print_insn): in CGEN_INT_INSN_P, make sure that the entire insn is
1382         in the buffer.
1383         * fr30-asm.c: Regenerated.
1384         * fr30-desc.c: Regenerated.
1385         * fr30-desc.h: Regenerated.
1386         * fr30-dis.c: Regenerated.
1387         * fr30-ibld.c: Regenerated.
1388         * fr30-opc.c: Regenerated.
1389         * fr30-opc.h: Regenerated.
1390         * m32r-asm.c: Regenerated.
1391         * m32r-desc.c: Regenerated.
1392         * m32r-desc.h: Regenerated.
1393         * m32r-dis.c: Regenerated.
1394         * m32r-ibld.c: Regenerated.
1395         * m32r-opc.c: Regenerated.
1396
1397 2000-08-28  Kazu Hirata  <kazu@hxi.com>
1398
1399         * tic30-dis.c: Fix formatting.
1400
1401 2000-08-27  Kazu Hirata  <kazu@hxi.com>
1402
1403         * sh-dis.c: Fix formatting.
1404
1405 2000-08-24  David Edelsohn  <dje@watson.ibm.com>
1406
1407         * ppc-opc.c (powerpc_opcodes): Add rfid, mtsrd, mtsrdin, mtmsrd.
1408
1409 2000-08-24  Kazu Hirata  <kazu@hxi.com>
1410
1411         * z8k-dis.c: Fix formatting.
1412
1413 2000-08-16  Jim Wilson  <wilson@redhat.com>
1414
1415         * ia64-ic.tbl (pr-readers-nobr-nomovpr): Add addl, adds.  Delete
1416         break, mov-immediate, nop.
1417         * ia64-opc-f.c: Delete fpsub instructions.
1418         * ia64-opc-m.c: Add POSTINC to all instructions with postincrement
1419         address operand.  Rewrite using macros to avoid long lines.
1420         * ia64-opc.h (POSTINC): Define.
1421         * ia64-asmtab.c: Regenerate.
1422
1423 2000-08-15  Jim Wilson  <wilson@redhat.com>
1424
1425         * ia64-ic.tbl: Add missing entries.
1426
1427 2000-08-08  Jason Eckhardt  <jle@redhat.com>
1428
1429         * i860-dis.c (print_br_address): Change third argument from int
1430         to long.
1431
1432 2000-08-07  Richard Henderson  <rth@redhat.com>
1433
1434         * ia64-dis.c (print_insn_ia64): Get byte skip count correct
1435         for MLI templates.  Handle IA64_OPND_TGT64.
1436
1437 2000-08-04  Ben Elliston  <bje@redhat.com>
1438
1439         * cgen-dis.in, cgen-asm.in, cgen-ibld.in: New files.
1440         * cgen.sh: Likewise.
1441
1442 2000-08-02  Jim Wilson  <wilson@redhat.com>
1443
1444         * ia64-dis.c (print_insn_ia64): Call ia64_free_opcode at end.
1445
1446 2000-07-29  Marek Michalkiewicz  <marekm@linux.org.pl>
1447
1448         * avr-dis.c (avr_operand): Use PARAMS macro in declaration.
1449         Change return type from void to int.  Check the combination
1450         of operands, return 1 if valid.  Fix to avoid BUF overflow.
1451         Report undefined combinations of operands in COMMENT.
1452         Report internal errors to stderr.  Output the adiw/sbiw
1453         constant operand in both decimal and hex.
1454         (print_insn_avr): Disassemble ldd/std with displacement of 0
1455         as ld/st.  Check avr_operand () return value, handle invalid
1456         combinations of operands like unknown opcodes.
1457
1458 2000-07-28  Ben Elliston  <bje@redhat.com>
1459
1460         * Makefile.am (CGEN, CGENDEPS, CGENDIR, CGENFLAGS): New.
1461         (run-cgen, stamp-m32r, stamp-fr30): New targets.
1462         * Makefile.in: Regenerate.
1463         * configure.in: Add --enable-cgen-maint option.
1464         * configure: Regenerate.
1465
1466 2000-07-26  Dave Brolley  <brolley@redhat.com>
1467
1468         * cgen-opc.c (cgen_hw_lookup_by_name): 'i' is now unsigned.
1469         (cgen_hw_lookup_by_num): Ditto.
1470         (cgen_operand_lookup_by_name): Ditto.
1471         (print_address): Ditto.
1472         (print_keyword): Ditto.
1473         * cgen-dis.c (hash_insn_array): Mark unused parameters with
1474         ATTRIBUTE_UNUSED.
1475         * cgen-asm.c (hash_insn_array): Mark unused parameters with
1476         ATTRIBUTE_UNUSED.
1477         (cgen_parse_keyword): Ditto.
1478
1479 2000-07-22  Jason Eckhardt  <jle@redhat.com>
1480
1481         * i860-dis.c: New file.
1482         (print_insn_i860): New function.
1483         (print_br_address): New function.
1484         (sign_extend): New function.
1485         (BITWISE_OP): New macro.
1486         (I860_REG_PREFIX): New macro.
1487         (grnames, frnames, crnames): New structures.
1488
1489         * disassemble.c (ARCH_i860): Define.
1490         (disassembler): Add check for bfd_arch_i860 to set disassemble
1491         function to print_insn_i860.
1492
1493         * Makefile.in (CFILES): Added i860-dis.c.
1494         (ALL_MACHINES): Added i860-dis.lo.
1495         (i860-dis.lo): New dependences.
1496
1497         * configure.in: New bits for bfd_i860_arch.
1498
1499         * configure: Regenerated.
1500
1501 2000-07-20  Hans-Peter Nilsson  <hp@axis.com>
1502
1503         * Makefile.am (CFILES): Add cris-dis.c and cris-opc.c.
1504         (ALL_MACHINES): Add cris-dis.lo and cris-opc.lo.
1505         (cris-dis.lo, cris-opc.lo): New rules.
1506         * Makefile.in: Rebuild.
1507         * configure.in (bfd_cris_arch): New target.
1508         * configure: Rebuild.
1509         * disassemble.c (ARCH_cris): Define.
1510         (disassembler): Support ARCH_cris.
1511         * cris-dis.c, cris-opc.c: New files.
1512         * po/POTFILES.in, po/opcodes.pot: Regenerate.
1513
1514 2000-07-11  Jakub Jelinek  <jakub@redhat.com>
1515
1516         * sparc-opc.c (sparc_opcodes): popc has 0 in rs1, not rs2.
1517         Reported by Bill Clarke <llib@computer.org>.
1518
1519 2000-07-09  Geoffrey Keating  <geoffk@redhat.com>
1520
1521         * ppc-opc.c (powerpc_opcodes): Correct suffix for vslw.
1522         Patch by Randall J Fisher <rfisher@ecn.purdue.edu>.
1523
1524 2000-07-09  Alan Modra  <alan@linuxcare.com.au>
1525
1526         * hppa-dis.c (fput_reg, fput_fp_reg, fput_fp_reg_r, fput_creg,
1527         fput_const, extract_3, extract_5_load, extract_5_store,
1528         extract_5r_store, extract_5R_store, extract_10U_store,
1529         extract_5Q_store, extract_11, extract_14, extract_16, extract_21,
1530         extract_12, extract_17, extract_22): Prototype.
1531         (print_insn_hppa): Rename inner block opcode -> opc to avoid
1532         shadowing outer block.
1533         (GET_BIT): Define.
1534
1535 2000-07-05  DJ Delorie  <dj@redhat.com>
1536
1537         * MAINTAINERS: new
1538
1539 2000-07-04  Alexandre Oliva  <aoliva@redhat.com>
1540
1541         * arm-dis.c (print_insn_arm): Output combinations of PSR flags.
1542
1543 2000-07-03  Marek Michalkiewicz  <marekm@linux.org.pl>
1544
1545         * avr-dis.c (avr_operand): Change _ () to _() around all strings
1546         marked for translation (exception from the usual coding style).
1547         (print_insn_avr): Initialize insn2 to avoid warnings.
1548
1549 2000-07-03  Kazu Hirata  <kazu@hxi.com>
1550
1551         * h8300-dis.c (bfd_h8_disassemble): Improve readability.
1552         * h8500-dis.c: Fix formatting.
1553
1554 2000-07-01  Alan Modra  <alan@linuxcare.com.au>
1555
1556         * Makefile.am (DEP): Fix 2000-06-22.  grep after running dep.sed
1557         (CLEANFILES): Add DEPA.
1558         * Makefile.in: Regenerate.
1559
1560 2000-06-26  Scott Bambrough  <scottb@netwinder.org>
1561
1562         * arm-dis.c (regnames): Add an additional register set to match
1563         the set used by GCC.  Make it the default.
1564
1565 2000-06-22  Alan Modra  <alan@linuxcare.com.au>
1566
1567         * Makefile.am (DEP): grep for leading `/' in DEP1, and fail if we
1568         find one.
1569         * Makefile.in: Regenerate.
1570
1571 2000-06-20  H.J. Lu  <hjl@gnu.org>
1572
1573         * Makefile.am: Rebuild dependency.
1574         * Makefile.in: Rebuild.
1575
1576 2000-06-18  Stephane Carrez  <stcarrez@worldnet.fr>
1577
1578         * Makefile.in, configure: regenerate
1579         * disassemble.c (disassembler): Recognize ARCH_m68hc12,
1580         ARCH_m68hc11.
1581         * m68hc11-dis.c (read_memory, print_insn, print_insn_m68hc12):
1582         New functions.
1583         * configure.in: Recognize m68hc12 and m68hc11.
1584         * m68hc11-dis.c, m68hc11-opc.c: New files for support of m68hc1x
1585         * Makefile.am (CFILES, ALL_MACHINES): New files for disassembly
1586         and opcode generation for m68hc11 and m68hc12.
1587
1588 2000-06-16  Nick Duffek  <nsd@redhat.com>
1589
1590         * disassemble.c (disassembler): Refer to the PowerPC 620 using
1591         bfd_mach_ppc_620 instead of 620.
1592
1593 2000-06-12  Kazu Hirata  <kazu@hxi.com>
1594
1595         * h8300-dis.c: Fix formatting.
1596         (bfd_h8_disassemble): Distinguish adds/subs, inc/dec.[wl]
1597         correctly.
1598
1599 2000-06-09  Denis Chertykov  <denisc@overta.ru>
1600
1601         * avr-dis.c (avr_operand): Bugfix for jmp/call address.
1602
1603 2000-06-07  Denis Chertykov  <denisc@overta.ru>
1604
1605         * avr-dis.c: completely rewritten.
1606
1607 2000-06-02  Kazu Hirata  <kazu@hxi.com>
1608
1609         * h8300-dis.c: Follow the GNU coding style.
1610         (bfd_h8_disassemble) Fix a typo.
1611
1612 2000-06-01  Kazu Hirata  <kazu@hxi.com>
1613
1614         * h8300-dis.c (bfd_h8_disassemble_init): Fix a typo.
1615         (bfd_h8_disassemble): Distinguish the operand size of inc/dev.[wl]
1616         correctly.  Fix a typo.
1617
1618 2000-05-31  Nick Clifton  <nickc@redhat.com>
1619
1620         * opintl.h (_(String)): Explain why dgettext is used instead of
1621         gettext.
1622
1623 2000-05-30  Nick Clifton  <nickc@redhat.com>
1624
1625         * opintl.h (gettext, dgettext, dcgettext, textdomain,
1626         bindtextdomain): Replace defines with those from intl/libgettext.h
1627         to quieten gcc warnings.
1628
1629 2000-05-26  Alan Modra  <alan@linuxcare.com.au>
1630
1631         * Makefile.am: Update dependencies with "make dep-am"
1632         * Makefile.in: Regenerate.
1633
1634 2000-05-25  Alexandre Oliva  <aoliva@redhat.com>
1635
1636         * m10300-dis.c (disassemble): Don't assume 32-bit longs when
1637         sign-extending operands.
1638
1639 2000-05-15  Donald Lindsay  <dlindsay@redhat.com>
1640
1641         * d10v-opc.c (d10v_opcodes): add ALONE tag to all short branches
1642         except brf's.
1643
1644 2000-05-21  Nick Clifton  <nickc@redhat.com>
1645
1646         * Makefile.am (LIBIBERTY): Define.
1647
1648 2000-05-19 Diego Novillo <dnovillo@redhat.com>
1649
1650         * mips-dis.c (REGISTER_NAMES): Rename to STD_REGISTER_NAMES.
1651         (STD_REGISTER_NAMES): New name for REGISTER_NAMES.
1652         (reg_names): Rename to std_reg_names. Change it to a char **
1653         static variable.
1654         (std_reg_names): New name for reg_names.
1655         (set_mips_isa_type): Set reg_names to point to std_reg_names by
1656         default.
1657
1658 2000-05-16  Frank Ch. Eigler  <fche@redhat.com>
1659
1660         * fr30-desc.h: Partially regenerated to account for changed
1661         CGEN_MAX_* -> CGEN_ACTUAL_MAX_* macros.
1662         * m32r-desc.h: Ditto.
1663
1664 2000-05-15  Nick Clifton  <nickc@redhat.com>
1665
1666         * arm-opc.h: Use upper case for flasg in MSR and MRS
1667         instructions.  Allow any bit to be set in the field_mask of
1668         the MSR instruction.
1669
1670         * arm-dis.c (print_insn_arm): Decode _x and _s bits of the
1671         field_mask of an MSR instruction.
1672
1673 2000-05-11  Thomas de Lellis  <tdel@windriver.com>
1674
1675         * arm-opc.h: Disassembly of thumb ldsb/ldsh
1676         instructions changed to ldrsb/ldrsh.
1677
1678 2000-05-11  Ulf Carlsson  <ulfc@engr.sgi.com>
1679
1680         * mips-dis.c (print_insn_arg): Don't mask top 32 bits of 64-bit
1681         target addresses for 'jal' and 'j'.
1682
1683 2000-05-10  Geoff Keating  <geoffk@redhat.com>
1684
1685         * ppc-opc.c (powerpc_opcodes): Make the predicted-branch opcodes
1686         also available in common mode when powerpc syntax is being used.
1687
1688 2000-05-08  Alan Modra  <alan@linuxcare.com.au>
1689
1690         * m68k-dis.c (dummy_printer): Add ATTRIBUTE_UNUSED to args.
1691         (dummy_print_address): Ditto.
1692
1693 2000-05-04  Timothy Wall  <twall@redhat.com>
1694
1695         * tic54x-opc.c: New.
1696         * tic54x-dis.c: New.
1697         * disassemble.c (disassembler): Add ARCH_tic54x.
1698         * configure.in: Added tic54x target.
1699         * configure: Ditto.
1700         * Makefile.am: Add tic54x dependencies.
1701         * Makefile.in: Ditto.
1702
1703 2000-05-03  J.T. Conklin  <jtc@redback.com>
1704
1705         * ppc-opc.c (VA, VB, VC, VD, VS, SIMM, UIMM, SHB): New macros, for
1706         vector unit operands.
1707         (VX, VX_MASK, VXA, VXA_MASK, VXR, VXR_MASK): New macros, for vector
1708         unit instruction formats.
1709         (PPCVEC): New macro, mask for vector instructions.
1710         (powerpc_operands): Add table entries for above operand types.
1711         (powerpc_opcodes): Add table entries for vector instructions.
1712
1713         * ppc-dis.c (print_insn_big_powerpc): Add PPC_OPCODE_ALTIVEC to mask.
1714         (print_insn_little_powerpc): Likewise.
1715         (print_insn_powerpc): Prepend 'v' when printing vector registers.
1716
1717 2000-04-24  Clinton Popetz  <cpopetz@redhat.com>
1718
1719         * configure.in: Add bfd_powerpc_64_arch.
1720         * disassemble.c (disassembler): Use print_insn_big_powerpc for
1721         64 bit code.
1722
1723 2000-04-24  Nick Clifton  <nickc@redhat.com>
1724
1725         * fr30-desc.c (fr30_cgen_cpu_open): Initialise signed_overflow
1726         field.
1727
1728 2000-04-23  Denis Chertykov  <denisc@overta.ru>
1729
1730         * avr-dis.c (reg_fmul_d): New. Extract destination register from
1731         FMUL instruction.
1732         (reg_fmul_r): New. Extract source register from FMUL instruction.
1733         (reg_muls_d): New. Extract destination register from MULS instruction.
1734         (reg_muls_r): New. Extract source register from MULS instruction.
1735         (reg_movw_d): New. Extract destination register from MOVW instruction.
1736         (reg_movw_r): New. Extract source register from MOVW instruction.
1737         (print_insn_avr): Handle MOVW, MULS, MULSU, FMUL, FMULS, FMULSU,
1738         EICALL, EIJMP, LPM r,Z, ELPM r,Z, SPM, ESPM instructions.
1739
1740 2000-04-22  Timothy Wall  <twall@redhat.com>
1741
1742         * ia64-gen.c (general): Add an ordered table of primary
1743         opcode names, as well as priority fields to disassembly data
1744         structures to enforce a preferred disassembly format based on the
1745         ordering of the opcode tables.
1746         (load_insn_classes): Show a useful message if IC tables are missing.
1747         (load_depfile): Ditto.
1748         * ia64-asmtab.h (struct ia64_dis_names ): Add priority flag to
1749         distinguish preferred disassembly.
1750         * ia64-opc-f.c: Reorder some insn for preferred disassembly
1751         format.  Fix incorrect flag on fma.s/fma.s.s0.
1752         * ia64-opc.c: Scan *all* disassembly matches and use the one with
1753         the highest priority.
1754         * ia64-opc-b.c: Use more abbreviations.
1755         * ia64-asmtab.c: Regenerate.
1756
1757 2000-04-21  Jason Eckhardt  <jle@redhat.com>
1758
1759         * hppa-dis.c (extract_16): New function.
1760         (print_insn_hppa): Fix incorrect handling of 'fe'. Added handling of
1761         new operand types l,y,&,fe,fE,fx.
1762
1763 2000-04-21  Richard Henderson  <rth@redhat.com>
1764             David Mosberger  <davidm@hpl.hp.com>
1765             Timothy Wall <twall@redhat.com>
1766             Bob Manson  <manson@charmed.cygnus.com>
1767             Jim Wilson  <wilson@redhat.com>
1768
1769         * Makefile.am (HFILES): Add ia64-asmtab.h, ia64-opc.h.
1770         (CFILES): Add ia64-dis.c, ia64-opc-a.c, ia64-opc-b.c, ia64-opc-f.c,
1771         ia64-opc-i.c, ia64-opc-m.c, ia64-opc-d.c, ia64-opc.c, ia64-gen.c,
1772         ia64-asmtab.c.
1773         (ALL_MACHINES): Add ia64-dis.lo, ia64-opc.lo.
1774         (ia64-ic.tbl, ia64-raw.tbl, ia64-waw.tbl, ia64-war.tbl, ia64-gen,
1775         ia64-gen.o, ia64-asmtab.c, ia64-dis.lo, ia64-opc.lo): New rules.
1776         * Makefile.in: Rebuild.
1777         * configure Rebuild.
1778         * configure.in (bfd_ia64_arch): New target.
1779         * disassemble.c (ARCH_ia64): Define.
1780         (disassembler): Support ARCH_ia64.
1781         * ia64-asmtab.c, ia64-asmtab.h, ia64-dis.c, ia64-gen.c ia64-ic.tbl,
1782         ia64-opc-a.c, ia64-opc-b.c, ia64-opc-d.c ia64-opc-f.c, ia64-opc-i.c,
1783         ia64-opc-m.c, ia64-opc-x.c, ia64-opc.c, ia64-opc.h, ia64-raw.tbl,
1784         ia64-war.tbl, ia64-waw.tbl: New files.
1785
1786 2000-04-20  Alexandre Oliva  <aoliva@redhat.com>
1787
1788         * m10300-dis.c (HAVE_AM30, HAVE_AM33): Define.
1789         (disassemble): Use them.
1790
1791 2000-04-14  Alan Modra  <alan@linuxcare.com.au>
1792
1793         * sysdep.h: Include "ansidecl.h" not <ansidecl.h>
1794         * Makefile.am: Update dependencies.
1795         * Makefile.in: Regenerate.
1796
1797 2000-04-14  Michael Sokolov  <msokolov@ivan.Harhan.ORG>
1798
1799         * a29k-dis.c, alpha-dis.c, alpha-opc.c, arc-dis.c, arc-opc.c,
1800         avr-dis.c, d10v-dis.c, d10v-opc.c, d30v-dis.c, d30v-opc.c,
1801         disassemble.c, h8300-dis.c, h8500-dis.c, hppa-dis.c, i370-dis.c,
1802         i370-opc.c, i960-dis.c, m10200-dis.c, m10200-opc.c, m10300-dis.c,
1803         m10300-opc.c, m68k-dis.c, m68k-opc.c, m88k-dis.c, mcore-dis.c,
1804         mips-dis.c, mips-opc.c, mips16-opc.c, pj-dis.c, pj-opc.c,
1805         ppc-dis.c, ppc-opc.c, sh-dis.c, sparc-dis.c, sparc-opc.c,
1806         tic80-dis.c, tic80-opc.c, v850-dis.c, v850-opc.c, vax-dis.c,
1807         w65-dis.c, z8k-dis.c, z8kgen.c: Include sysdep.h.  Remove
1808         ansidecl.h as sysdep.h includes it.
1809
1810 2000-04-7  Andrew Cagney  <cagney@b1.redhat.com>
1811
1812         * configure.in (WARN_CFLAGS): Set to -W -Wall by default.  Add
1813         --enable-build-warnings option.
1814         * Makefile.am (AM_CFLAGS, WARN_CFLAGS): Add definitions.
1815         * Makefile.in, configure: Re-generate.
1816
1817 2000-04-05  J"orn Rennecke <amylaar@redhat.com>
1818
1819         * sh-opc.h (sh_table): Use A_DISP_PC / PCRELIMM_8BY2 for ldre & ldrs.
1820         stc GBR,@-<REG_N> is available for arch_sh1_up.
1821         Group parallel processing insn with identical mnemonics together.
1822         Make three-operand psha / pshl come first.
1823
1824 2000-04-05  J"orn Rennecke <amylaar@redhat.co.uk>
1825
1826         * sh-opc.h (sh_nibble_type): Remove DISP_8 and DISP_4.
1827         Split IMM_[48]{,BY[24]} into IMM[01]_[48]{,BY[24]}.  Add REPEAT.
1828         (sh_arg_type): Add A_PC.
1829         (sh_table): Update entries using immediates.  Add repeat.
1830         * sh-dis.c (print_insn_shx): Remove DISP_8 and DISP_4.
1831         Split IMM_[48]{,BY[24]} into IMM[01]_[48]{,BY[24]}.  Add REPEAT.
1832
1833 2000-04-04  Alan Modra  <alan@linuxcare.com.au>
1834
1835         * po/opcodes.pot: Regenerate.
1836
1837         * Makefile.am (MKDEP): Use gcc -MM rather than mkdep.
1838         (DEP): Quote when passing vars to sub-make.  Add warning message
1839         to end.
1840         (DEP1): Rewrite for "gcc -MM".
1841         (CLEANFILES): Add DEP2.
1842         Update dependencies.
1843         * Makefile.in: Regenerate.
1844
1845 2000-04-03  Denis Chertykov  <denisc@overta.ru>
1846
1847         * avr-dis.c: Syntax cleanup.
1848         (add0fff): Print the pc relative address as a signed number.
1849         (add03f8): Likewise.
1850
1851 2000-04-01  Ian Lance Taylor  <ian@zembu.com>
1852
1853         * disassemble.c (disassembler_usage): Don't use a prototype.  Mark
1854         the parameter ATTRIBUTE_UNUSED.
1855         * ppc-opc.c: Add ATTRIBUTE_UNUSED as needed.
1856
1857 2000-04-01  Alexandre Oliva  <aoliva@redhat.com>
1858
1859         * m10300-opc.c: SP-based offsets are always unsigned.
1860
1861 2000-03-29  Thomas de Lellis  <tdel@windriver.com>
1862
1863         * arm-opc.h (thumb_opcodes): Disassemble 0xde.. to "bal"
1864         [branch always] instead of "undefined".
1865
1866 2000-03-27  Nick Clifton  <nickc@redhat.com>
1867
1868         * d30v-opc.c (d30v_format_table): Move SHORT_AR to end of list of
1869         short instructions, from end of list of long instructions.
1870
1871 2000-03-27  Ian Lance Taylor  <ian@zembu.com>
1872
1873         * Makefile.am (CFILES): Add avr-dis.c.
1874         (ALL_MACHINES): Add avr-dis.lo.
1875
1876 2000-03-27  Alan Modra  <alan@linuxcare.com>
1877
1878         * avr-dis.c (add0fff, add03f8): Don't use structure bitfields to
1879         truncate integers.
1880         (print_insn_avr): Call function via pointer in K&R compatible way.
1881         (dispLDD, regPP, reg50, reg104, reg40, reg20w, lit404, lit204,
1882         add0fff, add03f8): Convert to old style function declaration and
1883         add prototype.
1884         (avrdis_opcode): Add prototype.
1885
1886 2000-03-27  Denis Chertykov  <denisc@overta.ru>
1887
1888         * avr-dis.c: New file.  AVR disassembler.
1889         * configure.in (bfd_avr_arch): New architecture support.
1890         * disassemble.c: Likewise.
1891         * configure: Regenerate.
1892
1893 2000-03-06  J"oern Rennecke <amylaar@redhat.com>
1894
1895         * sh-opc.h (sh_table): ldre and ldrs have a *signed* displacement.
1896
1897 2000-03-02  J"orn Rennecke <amylaar@redhat.co.uk>
1898
1899         * d30v-dis.c (print_insn): Remove d*i hacks.  Use per-operand
1900         flag to determine if operand is pc-relative.
1901         * d30v-opc.c:
1902         (d30v_format_table):
1903         (REL6S3): Renamed from IMM6S3.
1904         Added flag OPERAND_PCREL.
1905         (REL12S3, REL18S3, REL32): Split from IMM12S3, IMM18S3, REL32, with
1906         added flag OPERAND_PCREL.
1907         (IMM12S3U): Replaced with REL12S3.
1908         (SHORT_D2, LONG_D): Delay target is pc-relative.
1909         (SHORT_B2r, SHORT_B3r, SHORT_B3br, SHORT_D2r, LONG_Ur, LONG_2r):
1910         Split from SHORT_B2, SHORT_D2, SHORT_B3b, SHORT_D2, LONG_U, LONG_2r,
1911         using the REL* operands.
1912         (LONG_2br, LONG_Dr): Likewise, from LONG_2b, LONG_D.
1913         (SHORT_D1r, SHORT_D2Br, LONG_Dbr): Renamed from SHORT_D1, SHORT_D2B,
1914         LONG_Db, using REL* operands.
1915         (SHORT_U, SHORT_A5S): Removed stray alternatives.
1916         (d30v_opcode_table): Use new *r formats.
1917
1918 2000-02-28  Nick Clifton  <nickc@redhat.com>
1919
1920         * m32r-desc.c (m32r_cgen_cpu_open): Replace 'flags' with
1921         'signed_overflow_ok_p'.
1922
1923 2000-02-27  Eli Zaretskii  <eliz@is.elta.co.il>
1924
1925         * Makefile.am (stamp-lib): Use $(LIBTOOL) --config to get the
1926         name of the libtool directory.
1927         * Makefile.in: Rebuild.
1928
1929 2000-02-24  Nick Clifton  <nickc@redhat.com>
1930
1931         * cgen-opc.c (cgen_set_signed_overflow_ok): New function.
1932         (cgen_clear_signed_overflow_ok): New function.
1933         (cgen_signed_overflow_ok_p): New function.
1934
1935 2000-02-23  Andrew Haley  <aph@redhat.com>
1936
1937         * m32r-asm.c, m32r-desc.c, m32r-desc.h, m32r-dis.c,
1938         m32r-ibld.c, m32r-opc.h: Rebuild.
1939
1940 2000-02-23  Linas Vepstas <linas@linas.org>
1941
1942         * i370-dis.c, i370-opc.c: New.
1943
1944         * disassemble.c (ARCH_i370): Define.
1945         (disassembler): Handle it.
1946
1947         * Makefile.am: Add support for Linux/IBM 370.
1948         * configure.in: Likewise.
1949
1950         * Makefile.in: Regenerate.
1951         * configure: Likewise.
1952
1953 2000-02-22  Chandra Chavva   <cchavva@redhat.com>
1954
1955         * d30v-opc.c (d30v_opcode_tab) : Added FLAG_NOT_WITH_ADDSUBppp to
1956         ST2H, STB, STH, STHH, STW and ST2H opcodes to prohibit parallel
1957         procedure.
1958
1959 2000-02-22  Andrew Haley  <aph@redhat.com>
1960
1961         * mips-dis.c (_print_insn_mips): New arg for OPCODE_IS_MEMBER:
1962         force gp32 to zero.
1963         * mips-opc.c (G6): New define.
1964         (mips_builtin_op): Add "move" definition for -gp32.
1965
1966 2000-02-22  Ian Lance Taylor  <ian@zembu.com>
1967
1968         From Grant Erickson <gerickso@Brocade.COM>:
1969         * ppc-opc.c: Correct dcread--it takes 3 arguments, not 2.
1970
1971 2000-02-21  Alan Modra  <alan@spri.levels.unisa.edu.au>
1972
1973         * dis-buf.c (buffer_read_memory): Change `length' param and all int
1974         vars to unsigned.
1975
1976 2000-02-17 J"orn Rennecke <amylaar@redhat.co.uk>
1977
1978         * sh-dis.c (print_movxy, print_insn_ddt, print_dsp_reg): New functions.
1979         (print_insn_ppi): Likewise.
1980         (print_insn_shx): Use info->mach to select appropriate insn set.
1981         Add support for sh-dsp.  Remove FD_REG_N support.
1982         * sh-opc.h (sh_nibble_type): Add new values for sh-dsp support.
1983         (sh_arg_type): Likewise.  Remove FD_REG_N.
1984         (sh_dsp_reg_nums): New enum.
1985         (arch_sh1, arch_sh2, arch_sh3, arch_sh3e, arch_sh4): New macros.
1986         (arch_sh_dsp, arch_sh3_dsp, arch_sh1_up, arch_sh2_up): Likewise.
1987         (arch_sh3_up, arch_sh3e_up, arch_sh4_up, arch_sh_dsp_up): Likewise.
1988         (arch_sh3_dsp_up): Likewise.
1989         (sh_opcode_info): New field: arch.
1990         (sh_table): Split up insn with FD_REG_N into ones with F_REG_N and
1991         D_REG_N.  Fill in arch field.  Add sh-dsp insns.
1992
1993 2000-02-14  Fernando Nasser  <fnasser@totem.to.redhat.com>
1994
1995         * arm-dis.c: Change flavor name from atpcs-special to
1996         special-atpcs to prevent name conflict in gdb.
1997         (get_arm_regname_num_options, set_arm_regname_option,
1998         get_arm_regnames): New functions.  API to access the several
1999         flavor of register names.  Note: Used by gdb.
2000         (print_insn_thumb): Use the register name entry from the currently
2001         selected flavor for LR and PC.
2002
2003 2000-02-10  Nick Clifton  <nickc@redhat.com>
2004
2005         * mcore-opc.h (enum mcore_opclass): Add MULSH and OPSR
2006         classes.
2007         (mcore_table): Add "idly4", "psrclr", "psrset", "mulsh" and
2008         "mulsh.h" instructions.
2009         * mcore-dis.c (imsk array): Add masks for MULSH and OPSR
2010         classes.
2011         (print_insn_mcore): Add support for little endian targets.
2012         Add support for MULSH and OPSR classes.
2013
2014 2000-02-07  Nick Clifton  <nickc@redhat.com>
2015
2016         * arm-dis.c (parse_arm_diassembler_option): Rename again.
2017         Previous delat did not take.
2018
2019 2000-02-03  Timothy Wall  <twall@redhat.com>
2020
2021         * dis-buf.c (buffer_read_memory):  Use octets_per_byte field
2022         to adjust target address bounds checking and calculate the
2023         appropriate octet offset into data.
2024
2025 2000-01-27  Nick Clifton  <nickc@redhat.com>
2026
2027         * arm-dis.c: (parse_disassembler_option): Rename to
2028         parse_arm_disassembler_option and allow to be exported.
2029
2030         * disassemble.c (disassembler_usage): New function: Print out any
2031         target specific disassembler options.
2032         Call arm_disassembler_options() if the ARM architecture is being
2033         supported.
2034
2035         * arm-dis.c (NUM_ELEM): Define this macro if not already
2036         defined.
2037         (arm_regname): New struct type for ARM register names.
2038         (arm_toggle_regnames): Delete.
2039         (parse_disassembler_option): Use register name structure.
2040         (print_insn): New function: Combines duplicate code found in
2041         print_insn_big_arm and print_insn_little_arm.
2042         (print_insn_big_arm): Call print_insn.
2043         (print_insn_little_arm): Call print_insn.
2044         (print_arm_disassembler_options): Display list of supported,
2045         ARM specific disassembler options.
2046
2047 2000-01-27  Thomas de Lellis  <tdel@windriver.com>
2048
2049         * arm-dis.c (printf_insn_big_arm): Treat ELF symbols with the
2050         ARM_STT_16BIT flag as Thumb code symbols.
2051
2052         * arm-dis.c (printf_insn_little_arm): Ditto.
2053
2054 2000-01-25  Thomas de Lellis  <tdel@windriver.com>
2055
2056         * arm-dis.c (printf_insn_thumb): Prevent double dumping
2057         of raw thumb instructions.
2058
2059 2000-01-20  Nick Clifton  <nickc@redhat.com>
2060
2061         * mcore-opc.h (mcore_table): Add "add" as an alias for "addu".
2062
2063 2000-01-03  Nick Clifton  <nickc@cygnus.com>
2064
2065         * arm-dis.c (streq): New macro.
2066         (strneq): New macro.
2067         (force_thumb): ew local variable.
2068         (parse_disassembler_option): New function: Parse a single, ARM
2069         specific disassembler command line switch.
2070         (parse_disassembler_option): Call parse_disassembler_option to
2071         parse individual command line switches.
2072         (print_insn_big_arm): Check force_thumb.
2073         (print_insn_little_arm): Check force_thumb.
2074
2075 For older changes see ChangeLog-9899
2076 \f
2077 Local Variables:
2078 mode: change-log
2079 left-margin: 8
2080 fill-column: 74
2081 version-control: never
2082 End: