opcodes/ChangeLog

   1 2001-11-11  Timothy Wall  <twall@alum.mit.edu>
   2
   3         * tic54x-dis.c: Use revised opcode structure.  Export opcode
   4         template lookup.
   5         (has_lkaddr): Don't forget about Lmem insns.
   6         * tic54x-opc.c: Add emulation trap.  Parallel table now uses
   7         standard opcode templates.
   8
   9 2001-11-13  Zack Weinberg <zack@codesourcery.com>
  10
  11         * i386-dis.c (grps): Change "sldt", "str", and "smsw" entries
  12         to "sldtQ", "strQ", "smswQ" respectively; all with Ev operand
  13         category instead of Ew.
  14
  15 2001-11-12  Niraj Gupta <ngupta@zumanetworks.com>
  16
  17         * m68k-opc.c: Fix definitions of wddata[bwl].
  18
  19 2001-11-09  Richard Sandiford  <rsandifo@redhat.com>
  20
  21         * cgen-asm.c (cgen_parse_keyword): If the keyword is too big to
  22         fit in the buffer, try to match the empty keyword.
  23
  24 2001-11-09  Nick Clifton  <nickc@cambridge.redhat.com>
  25
  26         * cgen-ibld.in (extract_1): Fix badly placed #if 0.
  27         * fr30-ibld.c: Regenerate.
  28         * m32r-ibld.c: Regenerate.
  29         * openrisc-ibld.c: Regenerate.
  30
  31 2001-11-04  Chris Demetriou  <cgd@broadcom.com>
  32
  33         * mips-dis.c (print_insn_mips): Remove spaces at end of line.
  34
  35 2001-11-02  Nick Clifton  <nickc@cambridge.redhat.com>
  36
  37         * configure.in (ALL_LINGUAS): Add "fr", "sv" and "tr".
  38         * configure: Regernate.
  39         * po/fr.po: New file.
  40         * po/sv.po: New file.
  41         * po/tr.po: New file.
  42
  43 2001-11-01  Stephane Carrez  <Stephane.Carrez@worldnet.fr>
  44
  45         * m68hc11-dis.c (print_insn): Fix disassembly of movb with a
  46         constant as source.
  47
  48 2001-10-30  Hans-Peter Nilsson  <hp@bitrange.com>
  49
  50         * Makefile.am (CFILES): Add mmix-dis.c and mmix-opc.c.  Regenerate
  51         dependencies.
  52         * Makefile.in: Regenerate.
  53         * mmix-dis.c, mmix-opc.c: New files.
  54
  55 2001-10-29  Kazu Hirata  <kazu@hxi.com>
  56
  57         * d30v-dis.c: Fix a comment typo.
  58
  59 2001-10-23  Chris Demetriou  <cgd@broadcom.com>
  60
  61         * mips-opc.c (mips_builtin_opcodes): Mark "bgezall" and
  62         "bltzall" as writing GPR 31 (since they do).
  63
  64         * mips-dis.c (print_insn_arg): Calculate info->target
  65         where appropriate.
  66         (print_insn_mips): Fill in instruction info.
  67         (print_mips16_insn_arg): Remove unneded variable 'val'.
  68         Removed duplicated instruction target calculations,
  69         calculate once and print that result.  Use same idiom for
  70         masking the jump segment bits as is used in print_insn_arg.
  71
  72 2001-10-20  Alan Modra  <amodra@bigpond.net.au>
  73
  74         * ppc-opc.c (CT): Make it an optional operand.
  75
  76 2001-10-17  Chris Demetriou  <cgd@broadcom.com>
  77
  78         * mips-dis.c (mips_isa_type): Make the ISA used to disassemble
  79         SB-1 binaries include instructions specific to the SB-1.
  80         * mips-opc.c (SB1): New definition.
  81         (mips_builtin_opcodes): Add SB-1 extension opcodes "div.ps",
  82         "recip.ps", "rsqrt.ps", and "sqrt.ps".
  83
  84 2001-10-17  matthew green  <mrg@redhat.com>
  85
  86         * ppc-opc.c (STRM): New AltiVec operand.
  87         (XDSS): New AltiVec instruction form.
  88         (mtvscr): Correct operand list.
  89         (dst, dstt, dstst, dststt, dss, dssall): AltiVec instructions.
  90
  91 2001-10-17  Alan Modra  <amodra@bigpond.net.au>
  92
  93         * po/POTFILES.in: Regenerate.
  94
  95 2001-10-13  matthew green  <mrg@redhat.com>
  96
  97         * ppc-opc.c (MO): New macro for MO field of mbar instruction.
  98         (powerpc_opcodes): Add rfci, wrtee, wrteei, mfdcrx, mfdcr,
  99         mtdcrx, mtdcr, msync, dcba and mbar as BookE instructions.
 100
 101 2001-10-13  Nick Clifton  <nickc@cambridge.redhat.com>
 102
 103         * cgen-ibld.in: Include safe-ctype.h in preference to
 104         ctype.h.
 105         * cgen-asm.in: Include safe-ctype.h in preference to
 106         ctype.h.  Fix formatting.  Use ISSPACE instead of isspace and
 107         TOLOWER instead of tolower.
 108         (@arch@_cgen_build_insn_regex): Remove duplication of syntax
 109         string elements in constructed regular expression.
 110         * fr30-asm.c: Regenerate.
 111         * fr30-desc.c: Regenerate.
 112         * fr30-ibld.c: Regenerate.
 113         * m32r-asm.c: Regenerate.
 114         * m32r-desc.c: Regenerate.
 115         * m32r-ibld.c: Regenerate.
 116         * openrisc-asm.c: Regenerate.
 117         * openrisc-desc.c: Regenerate.
 118         * openrisc-ibld.c: Regenerate.
 119         * po/opcodes.pot: Regenerate.
 120
 121 2001-10-12  matthew green  <mrg@redhat.com>
 122
 123         * ppc-opc.c (insert_de, extract_de, insert_des, extract_des): New
 124         instruction field instruction/extraction functions for new BookE
 125         DE form instructions.
 126         (CT): New macro for CT field in an X form instruction.
 127         (DE, DES, DEO, DE_MASK): New macros for DE/DES fields in DE form
 128         instructions.
 129         (PPC64): Don't include PPC_OPCODE_PPC.
 130         (403): New opcode macro for PPC403 processors.
 131         (BOOKE): New opcode macro for BookE processors.
 132         (bce, bcel, bcea, bcela, bclre, bclrel: New BookE instructions.
 133         (bcctre, bcctrel, be, bel, bea, bela, icbt, icbte, lwzxe): Likewise.
 134         (dcbste, lwzuxe, luxe, dcbfe, lbzxe, lwarxe, lbzuxe): Likewise.
 135         (stwcxe, stwxe, stxe, stwuxe, stuxe, stbxe, dcbtste, stbuxe): Likewise.
 136         (mfapidi, dcbte, lhzxe, lhzuxe, lhaxe, lhauxe, subfe64): Likewise.
 137         (subfeo64, adde64, addeo64, sthxe, sthuxe, subfze64): Likewise.
 138         (subfzeo64, addze64, addzeo64, dcbie, subfme64, subfmeo64): Likewise.
 139         (addme64, addmeo64, stdcxe., mcrxr64, lwbrxe, lfsxe, lfsuxe): Likewise.
 140         (lfdxe, lfduxe, stwbrxe, stfsxe, stfsuxe, stfdxe, dcbae): Likewise.
 141         (stfduxe, tlbivax, tlbivaxe, lhbrxe, ldxe, lduxe, tlbsx): Likewise.
 142         (tlbsxe, sthbrxe, stdxe, stduxe, icbie, stfiwxe, dcbze, lbze): Likewise.
 143         (lbzue, ldue, lhze, lhzue, lhae, lhaue, lwze, lwzue): Likewise.
 144         (stbe, stbue, sthe, sthue, stwe, stwue, lfse, lfsue, lfde): Likewise.
 145         (lfdue, stde, stdue, stfse, stfsue, stfde, stfdue): Likewise.
 146
 147         * ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc): Look
 148         for a disassembler option of `booke', `booke32' or `booke64' to enable
 149         BookE support in the disassembler.
 150
 151 2001-10-12  John Healy  <jhealy@redhat.com>
 152
 153         * cgen-dis.in (print_insn): Use min (cd->base_insn_bitsize, buflen*8)
 154         for the length when extracting the base part of the insn.
 155
 156 2001-10-09  Bruno Haible  <haible@clisp.cons.org>
 157
 158         * cgen-asm.in (*_cgen_build_insn_regex): Generate a case sensitive
 159         regular expression.  Fix some formatting problems.
 160         * fr30-asm.c: Regenerate.
 161         * openrisc-asm.c: Regenerate.
 162         * m32r-asm.c: Regenerate.
 163
 164 2001-10-09  Christian Groessler <cpg@aladdin.de>
 165
 166         * z8k-dis.c (unparse_instr): Fixed formatting. Change disassembly
 167         of indirect register memory accesses to be same format the
 168         assembler accepts.
 169
 170 2001-10-09  Nick Clifton  <nickc@cambridge.redhat.com>
 171
 172         * sh-opc.h: Fix encoding of least significant nibble of the
 173         DSP single data transfer instructions.
 174
 175         * sh-dis.c (print_insn_shx): Fix decoding of As opcode in DSP
 176         instructions.
 177
 178 2001-10-08  Nick Clifton  <nickc@cambridge.redhat.com>
 179
 180         * cgen-asm.in: Fix compile time warning messages in generated
 181         C files.
 182         * cgen-dis.in: The same.
 183         * cgen-ibld.in: The same.
 184         * fr30-asm.c: Regenerate.
 185         * fr30-desc.c: Regenerate.
 186         * fr30-dis.c: Regenerate.
 187         * fr30-ibld.c: Regenerate.
 188         * fr30-opc.c: Regenerate.
 189         * m32r-asm.c: Regenerate.
 190         * m32r-desc.c: Regenerate.
 191         * m32r-dis.c: Regenerate.
 192         * m32r-ibld.c: Regenerate.
 193         * m32r-opc.c: Regenerate.
 194         * m32r-opinst.c Regenerate.
 195         * openrisc-asm.c: Regenerate.
 196         * openrisc-desc.c: Regenerate.
 197         * openrisc-dis.c: Regenerate.
 198         * openrisc-ibld.c: Regenerate.
 199         * openrisc-opc.c: Regenerate.
 200         * openrisc-opc.h: Regenerate.
 201         * Makefile.in: Regenerate.
 202         * po/POTFILES.in: Regenerate.
 203         * po/opcodes.pot: Regenerate.
 204
 205 2001-10-08  Aldy Hernandez  <aldyh@redhat.com>
 206
 207         * arm-opc.h (arm_opcodes): Add cirrus insns.
 208
 209         * arm-dis.c (print_insn_arm): Add 'I' case.
 210
 211 2001-10-03  Alan Modra  <amodra@bigpond.net.au>
 212
 213         * po/POTFILES.in: Regenerate.
 214         * configure: Regenerate.
 215
 216 2001-10-02  Alan Modra  <amodra@bigpond.net.au>
 217
 218         * Makefile.am (Makefile): Depend on bfd/configure.in.
 219         Run "make dep-am".
 220         * Makefile.in: Regenerate.
 221
 222 2001-09-30  John Healy  <jhealy@redhat.com>
 223
 224         * cgen-ibld.in (insert_1): Switched bfd_get_bits and bfd_set_bits
 225         calls to cgen_get_insn_value and cgen_put_insn_value calls.
 226         (extract_1): Switched bfd_get_bits call to cgen_get_insn_value call.
 227
 228 2001-09-30  Hans-Peter Nilsson  <hp@bitrange.com>
 229
 230         * Makefile.am: Update dependencies with "make dep-am".
 231         * Makefile.in: Regenerate.
 232
 233 2001-09-26  Alan Modra  <amodra@bigpond.net.au>
 234
 235         * arc-dis.c: Formatting fixes.
 236         (my_sprintf): Define using VPARAMS, VA_OPEN, VA_FIXEDARG, VA_CLOSE.
 237
 238 2001-09-21  Bruno Haible  <haible@clisp.cons.org>
 239
 240         * arc-dis.c: Don't include <ctype.h>.
 241         * openrisc-desc.c: Likewise.
 242         * openrisc-ibld.c: Likewise.
 243
 244 2001-09-20  Nick Clifton  <nickc@cambridge.redhat.com>
 245
 246         * fr30-opc.c: Fix compile time warning messages.
 247         * i370-opc.c: Fix compile time warning messages.
 248         * i960-dis.c: Fix compile time warning messages.
 249         * m32r-asm.c: Fix compile time warning messages.
 250         * m32r-desc.c: Fix compile time warning messages.
 251         * m32r-dis.c: Fix compile time warning messages.
 252         * m32r-ibld.c: Fix compile time warning messages.
 253         * m32r-opc.c: Fix compile time warning messages.
 254         * m32r-opinst.c: Fix compile time warning messages.
 255         * ns32k-dis.c: Fix compile time warning messages.
 256         * openrisc-asm.c: Fix compile time warning messages.
 257         * openrisc-desc.c: Fix compile time warning messages.
 258         * openrisc-dis.c: Fix compile time warning messages.
 259         * openrisc-ibld.c: Fix compile time warning messages.
 260         * openrisc-opc.c: Fix compile time warning messages.
 261         * pdp11-dis.c: Fix compile time warning messages.
 262         * tic54x-dis.c: Fix compile time warning messages.
 263         * v850-opc.c: Fix compile time warning messages.
 264         * vax-dis.c: Fix compile time warning messages.
 265         * w65-opc.h: Fix compile time warning messages.
 266         * z8k-opc.h: Fix compile time warning messages.
 267         * z8kgen.c: Fix compile time warning messages.
 268
 269 2001-09-19  Nick Clifton  <nickc@cambridge.redhat.com>
 270
 271         * arm-dis.c:   Fix compile time warning messages.
 272         * cgen-asm.c:  Fix compile time warning messages.
 273         * cgen-dis.c:  Fix compile time warning messages.
 274         * cris-dis.c:  Fix compile time warning messages.
 275         * d10v-dis.c:  Fix compile time warning messages.
 276         * fr30-asm.c:  Fix compile time warning messages.
 277         * fr30-desc.c: Fix compile time warning messages.
 278         * fr30-dis.c:  Fix compile time warning messages.
 279         * fr30-ibld.c: Fix compile time warning messages.
 280
 281 2001-09-18  Bruno Haible  <haible@clisp.cons.org>
 282
 283         * cgen-asm.c: Include "safe-ctype.h" instead of <ctype.h>.
 284         (cgen_parse_keyword): Use ISALNUM instead of isalnum.
 285         * cgen-opc.c: Include "safe-ctype.h" instead of <ctype.h>.
 286         (cgen_keyword_lookup_name): Use ISALPHA/TOLOWER instead of
 287         isalpha/tolower.
 288         (cgen_keyword_add): Use ISALNUM instead of isalnum.
 289         (hash_keyword_name): Use TOLOWER instead of tolower.
 290         * fr30-asm.c: Include "safe-ctype.h" instead of <ctype.h>.
 291         (parse_insn_normal): Use TOLOWER/ISSPACE instead of
 292         tolower/isspace.
 293         (fr30_cgen_assemble_insn): Use ISSPACE instead of isspace.
 294         * fr30-desc.c: Don't include <ctype.h>.
 295         * fr30-ibld.c: Likewise.
 296         * ia64-gen.c: Include "safe-ctype.h" instead of <ctype.h>.
 297         (load_insn_classes, parse_resource_users, load_depfile): Use
 298         ISSPACE instead of isspace.
 299         * m32r-asm.c: Include "safe-ctype.h" instead of <ctype.h>.
 300         (parse_insn_normal): Use TOLOWER/ISSPACE instead of
 301         tolower/isspace.
 302         (m32r_cgen_assemble_insn): Use ISSPACE instead of isspace.
 303         * m32r-desc.c: Don't include <ctype.h>.
 304         * m32r-ibld.c: Likewise.
 305         * openrisc-asm.c: Include "safe-ctype.h" instead of <ctype.h>.
 306         (parse_insn_normal): Use TOLOWER/ISSPACE instead of
 307         tolower/isspace.
 308         (openrisc_cgen_assemble_insn): Use ISSPACE instead of isspace.
 309
 310 2001-09-18  Martin Schwidefsky <schwidefsky@de.ibm.com>
 311
 312         * Makefile.am: Add rules and dependencies to create the s/390 opcode
 313         table out of s390-opc.txt automatically.
 314         * configure.in: Add BFD_CC_FOR_BUILD to allow CC_FOR_BUILD to be used.
 315         * s390-mkopc.c (dumpTable): Change output to create a complete file.
 316         * s390-opc.c: New improved opcode format macros and remove the
 317         pregenerated opcode table.
 318         * s390-opc.txt: Adapt to new improved opcode format macros.
 319
 320 2001-09-14  David Schleef <ds@schleef.org>
 321
 322         * ppc-opc.c (VXA, VXA_MASK): Fix mask bits.
 323
 324 2001-09-04  Alan Modra  <amodra@bigpond.net.au>
 325
 326         * i386-dis.c (grps): Don't print the implicit al/ax/eax register
 327         for opcode 0xf6 or 0xf7 forms of mul, imul, div, idiv insns.
 328
 329 2001-08-31  Eric Christopher  <echristo@redhat.com>
 330             Jason Eckhardt    <jle@redhat.com>
 331
 332         * mips-dis.c: Add support for bfd_mach_mipsisa32 and
 333         bfd_mach_mipsisa64. Remove bfd_mach_mips32, bfd_mach_mips32_4k,
 334         bfd_mach_mips64.
 335
 336 2001-08-31  Andreas Jaeger  <aj@suse.de>
 337
 338         * tic54x-opc.c: Add default initializers to avoid warnings.
 339
 340         * arc-opc.c: Include "sysdep.h" to get stdio.h as include file.
 341         * arc-ext.c: Likewise.
 342
 343 2001-08-28  matthew gren  <mrg@redhat.com>
 344
 345         * ppc-opc.c (icbt): Order correctly.
 346
 347 2001-08-27  David Edelsohn  <dje@watson.ibm.com>
 348             Torbjorn Granlund  <tege@swox.com>
 349
 350         * ppc-opc.c (DS): Add PPC_OPERAND_DS flag.
 351         (LS): Define.
 352         (insert_ds): Complain if not a multiple of 4.
 353         (XSYNC): Define.
 354         (XSYNC_MASK): Define.
 355         (powerpc_opcodes): Add "slbmte", "lwsync", "ptesync", "slbmfev",
 356         "slbmfee".  Modify "sync" to use XSYNC_MASK and LS.
 357
 358 2001-08-26  Andreas Jaeger  <aj@suse.de>
 359
 360         * h8500-opc.h: Add default initializers to h8500_table to shut up
 361         GCC warnings.
 362
 363 2001-08-25  Andreas Jaeger  <aj@suse.de>
 364
 365         * tic54x-dis.c: Add unused attributes where needed.
 366
 367         * z8k-dis.c (output_instr): Add unused attribute.
 368
 369         * h8300-dis.c: Add missing prototypes.
 370         (bfd_h8_disassemble): Make static.
 371
 372         * cris-dis.c: Add missing prototype.
 373         * h8500-dis.c: Likewise.
 374         * m68hc11-dis.c: Likewise.
 375         * pj-dis.c: Likewise.
 376         * tic54x-dis.c: Likewise.
 377         * v850-dis.c: Likewise.
 378         * vax-dis.c: Likewise.
 379         * w65-dis.c: Likewise.
 380         * z8k-dis.c: Likewise.
 381
 382         * d10v-dis.c: Add missing prototype.
 383         (dis_long): Remove unused variable.
 384         (dis_2_short): Likewise.
 385
 386         * sh-dis.c: Add missing prototypes.
 387         * v850-opc.c: Likewise.
 388         Add unused attributes where needed.
 389
 390         * ns32k-dis.c: Add missing prototypes.
 391         (bit_extract_simple): Remove unused variable.
 392
 393 2001-08-23  Martin Schwidefsky  <schwidefsky@de.ibm.com>
 394
 395         * opcodes/s390-opc.c: Add "low or high" and "not low or high"
 396         branch instructions for gcc 3.0.
 397         * opcodes/s390-opc.txt: Likewise.
 398
 399 2001-08-21  Andreas Jaeger  <aj@suse.de>
 400
 401         * i960-dis.c: Add parameters for prototypes
 402         (ctrl): Add unused attributes.
 403         (cobr): Likewise.
 404         (put_abs): Likewise.
 405
 406         * mips-dis.c: Add missing prototypes.
 407         * a29k-dis.c: Likewise.
 408         * arc-dis.c: Likewise.
 409         * ia64-opc.c: Likewise.
 410
 411         * s390-dis.c: Add missing prototypes.
 412         (init_disasm): Remove unused attribute since the parameter is
 413         used.
 414
 415 2001-08-16  Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
 416
 417         * mips-opc.c (M1): Define. Reformatted Code.
 418         (mips_builtin_opcodes): Added performance counter opcodes mfpc, mfps,
 419         mtps, mtps. Typo.
 420
 421 2001-08-16  Jonathan Larmour  <jlarmour@redhat.com>
 422
 423         * mips-opc.c: R3900s can support all branch likely INSN_MACROs where
 424         the corresponding non-likely insn is in MIPS I.
 425
 426 2001-08-13  Kazu Hirata  <kazu@hxi.com>
 427
 428         * mcore-dis.c: Fix formatting.
 429         * mips-dis.c: Likewise.
 430         * pj-dis.c: Likewise.
 431         * z8k-dis.c: Likewise.
 432
 433 2001-08-12  Richard Henderson  <rth@redhat.com>
 434
 435         * cgen-ibld.in (extract_normal): Match type of VALUE and MASK
 436         to *VALUEP.  Regenerate all cgen files.
 437
 438 2001-08-10  Richard Sandiford  <rsandifo@redhat.com>
 439
 440         * mips-dis.c (print_insn_mips): Remove OPCODE_IS_MEMBER's gp32
 441         argument.
 442         * mips-opc.c (G6): Undefine.
 443         (mips_builtin_opcodes): Remove gp32 entry for "move".  Add macro
 444         as the first "move" alternative.
 445
 446 2001-08-10  Andreas Jaeger  <aj@suse.de>
 447
 448         * configure.in: Add -Wstrict-prototypes and -Wmissing-prototypes
 449         to build warnings.
 450         * configure: Regenerate.
 451
 452 2001-08-10  Alan Modra  <amodra@bigpond.net.au>
 453
 454         * ppc-opc.c: Revert 2001-08-08.
 455
 456 2001-08-09  Alan Modra  <amodra@bigpond.net.au>
 457
 458         * dis-buf.c (generic_strcat_address): Add missing prototype.
 459         #if 0 the functions as it is unused.
 460
 461 2001-08-08  Alan Modra  <amodra@bigpond.net.au>
 462
 463         1999-10-25  Torbjorn Granlund  <tege@swox.com>
 464         * ppc-opc.c: Include "bfd.h".
 465         (powerpc_operands): Add new field for reloc type.
 466
 467 2001-07-21  Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
 468
 469         * mips-dis.c (print_insn_arg): Don't use software integer registers
 470         for coprocessor registers.
 471         (get_mips_isa): Removed.
 472         (is_newabi): New function, checks if NewABI is used.
 473         (_print_insn_mips): Get distinction between old ABI and new ABI right.
 474
 475 2001-08-01  Christian Groessler <cpg@aladdin.de>
 476
 477         * z8kgen.c: Fixed indentation of opt[] array.  Include stdio.h to
 478         get stderr definition.
 479         (internal, gas): Removed warnings.
 480         (gas): Create a correct final entry for created array.
 481         * z8k-opc.h: Recreated with new z8kgen.
 482
 483 2001-07-28  Kazu Hirata  <kazu@hxi.com>
 484
 485         * i386-dis.c: Fix formatting.
 486
 487 2001-07-28  Matthias Kramm <kramm@quiss.org>
 488
 489         * i386-dis.c: Change formatting conventions for architecture
 490         i386:intel to better match the format of various intel i386
 491         assemblers, like nasm, tasm or masm.
 492
 493 2001-07-24  Alan Modra  <amodra@bigpond.net.au>
 494
 495         * Makefile.am: Update dependencies with "make dep-am".
 496         * Makefile.in: Regenerate
 497
 498 2001-07-24  Kazu Hirata  <kazu@hxi.com>
 499
 500         * alpha-dis.c: Fix formatting.
 501         * cris-dis.c: Likewise.
 502         * d10v-dis.c: Likewise.
 503         * d30v-dis.c: Likewise.
 504         * m10300-dis.c: Likewise.
 505         * tic54x-dis.c: Likewise.
 506
 507 2001-07-23  Kazu Hirata  <kazu@hxi.com>
 508
 509         * m68k-dis.c: Fix formatting.
 510         * pj-dis.c: Likewise.
 511         * s390-dis.c: Likewise.
 512         * z8k-dis.c: Likewise.
 513
 514 2001-07-21  Chris Demetriou  <cgd@broadcom.com>
 515
 516         * mips-opc.c (mips_builtin_opcodes): Sort c.le.s and c.lt.s
 517         into the rest of the surrounding definitions.
 518
 519 2001-07-18  Alan Modra  <amodra@bigpond.net.au>
 520
 521         * i386-dis.c (grps): Print l or w suffix, and require mem modrm
 522         for lgdt, lidt, sgdt, sidt.
 523
 524 2001-07-13  Philip Blundell  <philb@gnu.org>
 525
 526         * arm-dis.c (print_insn_arm): Use decimal for offsets in LDR/STR.
 527
 528 2001-07-12  Jeff Johnston  <jjohnstn@redhat.com>
 529
 530         * cgen-asm.in: Include "xregex.h" always to enable the libiberty
 531         regex support.
 532         (@arch@_cgen_build_insn_regex): New routine from Graydon.
 533         (@arch@_cgen_assemble_insn): Add Graydon's code to use regex
 534         to verify if it is worth parsing the insn as insn "x".  Also update
 535         error message when insn is not a recognized format of the insn vs
 536         when the insn is completely unrecognized.
 537
 538 2001-07-11  Frank Ch. Eigler  <fche@redhat.com>
 539
 540         * cgen-dis.in (print_insn): Use cgen_get_insn_value instead of
 541         bfd_get_bits.
 542         * cgen-opc.c (cgen_get_insn_value, cgen_put_insn_value): Respect
 543         non-zero CGEN_CPU_DESC->insn_chunk_bitsize.
 544
 545 2001-07-09  Andreas Jaeger  <aj@suse.de>, Karsten Keil <kkeil@suse.de>
 546
 547         * i386-dis.c (set_op): Handle 64 bit and 32 bit mode.
 548         (OP_J): Use bfd_vma for mask to work properly with 64 bits.
 549         (op_address,op_riprel): Use bfd_vma to handle 64 bits.
 550
 551 2001-07-05  Ben Elliston  <bje@redhat.com>
 552
 553         * Makefile.am (CPUDIR): Define.
 554         (stamp-m32r): Update dependencies.
 555         (stamp-fr30): Ditto.
 556         (stamp-openrisc): Ditto.
 557         * Makefile.in: Regenerate.
 558
 559 2001-07-03  Zoltan Hidvegi <hzoli@hzoli.2y.net>
 560
 561         * ppc-opc.c: Fix encoding of 'clf' instruction.
 562
 563 2001-06-30  Geoffrey Keating  <geoffk@redhat.com>
 564
 565         * cgen-ibld.in (insert_normal): Support CGEN_IFLD_SIGN_OPT.
 566
 567 2001-06-28  Geoffrey Keating  <geoffk@redhat.com>
 568
 569         * cgen-asm.c (cgen_parse_keyword): Allow any first character.
 570         * cgen-opc.c (cgen_keyword_add): Ignore special first
 571         character when building nonalpha_chars field.
 572
 573 2001-06-24  Ben Elliston  <bje@redhat.com>
 574
 575         * m88k-dis.c: Format to conform to GNU coding standards.
 576
 577 2001-06-23  Andreas Jaeger  <aj@suse.de>
 578
 579         * disassemble.c (disassembler_usage): Add unused attribute.
 580
 581 2001-06-22  Eric Christopher  <echristo@redhat.com>
 582
 583         * mips-opc.c: Move prefx to start of the table.
 584
 585 2001-06-22  Stacey Sheldon <ssheldon@Catena.com>
 586
 587         * arc-opc.c (insert_st_syntax): Fix over-optimisation of ST
 588         instruction.
 589
 590 2001-06-22  Pauli <pauli@moreton.com.au>
 591
 592         * m68k-opc.c: Add wdebug instruction.
 593
 594 2001-06-15  Aldy Hernandez  <aldyh@redhat.com>
 595
 596         * m10300-opc.c (mn10300_opcodes): Change opcode for AM33 subc.
 597
 598 2001-06-14  Geoffrey Keating  <geoffk@redhat.com>
 599
 600         * cgen-asm.c (cgen_parse_keyword): When looking for the
 601         boundaries of a keyword, allow any special characters
 602         that are actually in one of the allowed keyword.
 603         * cgen-opc.c (cgen_keyword_add): Add any special characters
 604         to the nonalpha_chars field.
 605
 606 2001-06-12  Martin Schwidefsky <schwidefsky@de.ibm.com>
 607
 608         * s390-opc.c: Add lgh instruction.
 609         * s390-opc.txt: Likewise.
 610
 611 2001-06-11  Alan Modra  <amodra@bigpond.net.au>
 612
 613         * i386-dis.c: Group function prototypes in one place.
 614         (FLOATCODE): Redefine as 1.
 615         (USE_GROUPS): Redefine as 2.
 616         (USE_PREFIX_USER_TABLE): Redefine as 3.
 617         (X86_64_SPECIAL): Define as 4.
 618         (GRP1b..GRPAMD): Move USE_GROUPS to bytecode1, index to bytecode2.
 619         (PREGRP0..PREGRP26): Similarly with USE_PREFIX_USER_TABLE.
 620         (dis386_att, dis386_intel, disx86_64_att, disx86_64_intel): Delete.
 621         (dis386): New table combining above four tables.
 622         (dis386_twobyte_att, dis386_twobyte_intel): Delete.
 623         (dis386_twobyte): New table combining above two tables.
 624         (x86_64_table): New table to handle x86_64.
 625         (X86_64_0): Define.
 626         (float_mem_att, float_mem_intel): Delet.
 627         (float_mem): New table combining above two tables.
 628         (print_insn_i386): Modify for above.
 629         (dofloat): Likewise.
 630         (putop): Handle '{', '|' and '}' to select alternative mnemonics.
 631         Return 0 on success, 1 if no valid alternative.
 632         (putop <case 'F'>, <case 'H'>): Print nothing for intel_syntax.
 633         (putop <case 'T'>): Move to case 'U', and share case 'Q' code.
 634         (putop <case 'I'>): Move to case 'T', and share case 'P' code.
 635         (OP_REG <case rAX_reg .. rDI_reg>): Handle as for eAX_reg .. eDI_reg
 636         if not 64-bit mode.
 637         (OP_I <case q_mode>): Handle as for v_mode if not 64-bit mode.
 638         (OP_I64): If not 64-bit mode, call OP_I.
 639         OP_OFF64): If not 64-bit mode, call OP_OFF.
 640         (OP_ST, OP_STi, OP_SEG, OP_DIR, OP_OFF, OP_OFF64, OP_MMX): Rename
 641         'ignore'/'ignored' to 'bytemode'.
 642
 643 2001-06-10  Alan Modra  <amodra@bigpond.net.au>
 644
 645         * configure.in: Sort 'ta' case statement.
 646         * configure: Regenerate.
 647
 648         * i386-dis.c (dis386_att): Add 'H' to conditional branch and
 649         loop,jcxz insns.
 650         (disx86_64_att): Likewise.
 651         (dis386_twobyte_att): Likewise.
 652         (print_insn_i386): Don't print branch hints as a prefix.
 653         (putop): 'H' macro prints branch hints.
 654         (get64): Kill compile warnings.
 655
 656 2001-06-09  Alexandre Oliva  <aoliva@redhat.com>
 657
 658         * sh-opc.h (sh_table): Don't use empty initializers.
 659
 660 2001-06-06  Christian Groessler <cpg@aladdin.de>
 661
 662         * z8k-dis.c: Fix formatting.
 663         (unpack_instr): Remove unused cases in switch statement. Add
 664         safety abort() in default case.
 665         (unparse_instr): Add safety abort() in default case.
 666
 667 2001-06-06  Peter Jakubek <pjak@snafu.de>
 668
 669         * m68k-dis.c (print_insn_m68k): Fix typo.
 670         * m68k-opc.c (m68k_opcodes): Correct allowed operands for
 671         mcf (ColdFire) div, rem and moveb instructions.
 672
 673 2001-06-06  Alan Modra  <amodra@bigpond.net.au>
 674
 675         * i386-dis.c (cond_jump_flag, loop_jcxz_flag): Define.
 676         (cond_jump_mode, loop_jcxz_mode): Define.
 677         (dis386_att): Add cond_jump_flag and loop_jcxz_flag as
 678         appropriate, and 'F' suffix to loop insns.
 679         (disx86_64_att): Likewise.
 680         (dis386_twobyte_att): Likewise.
 681         (print_insn_i386): Don't output addr prefix for loop, jcxz insns.
 682         Output data size prefix for long conditional jumps.  Output cs and
 683         ds branch hints.
 684         (putop): Handle 'F', and mark PREFIX_ADDR used for case 'E'.
 685         (OP_J): Don't make PREFIX_DATA used.
 686
 687 2001-06-04  Alexandre Oliva  <aoliva@redhat.com>
 688
 689         * sh-opc.h (sh_table): Complete last element entry to avoid
 690         compiler warning.
 691
 692 2001-05-16  Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
 693
 694         * mips-dis.c (mips_isa_type): Add MIPS r12k support.
 695
 696 2001-05-23  Alan Modra  <amodra@one.net.au>
 697
 698         * arc-opc.c: Whitespace changes.
 699
 700 2001-05-18  Hans-Peter Nilsson  <hp@axis.com>
 701
 702         * cris-opc.c (cris_spec_regs): Add missing initializer field for
 703         last element.
 704
 705 2001-05-15  Frank Ch. Eigler  <fche@redhat.com>
 706
 707         * cgen-dis.in (extract_normal): Complete support for min<base case.
 708
 709 2001-05-15  Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
 710
 711         * mips-dis.c (INSNLEN): Rename MAXLEN.
 712         (std_reg_names): Replace by mips32_reg_names and mips64_reg_names.
 713         (print_insn_arg): Remove $ prefix of register names.
 714         (set_mips_isa_type): Remove.
 715         (mips_isa_type): New function.
 716         (get_mips_isa): New Function.
 717         (print_insn_mips): Rename _print_insn_mips.
 718         (_print_insn_mips): New function, contains code which was
 719         duplicated in print_insn_big_mips and print_insn_little_mips.
 720         (print_insn_big_mips): Moved code to _print_insn_mips.
 721         (print_insn_little_mips): Likewise.
 722         (print_mips16_insn_arg): Remove $ prefix of register names.
 723         Print error message before abort.
 724
 725 2001-05-14  J.T. Conklin  <jtc@redback.com>
 726
 727         * ppc-opc.c (powerpc_opcodes): Fixed extended opcode field of
 728         simplified mnemonics used for setting PPC750-specific special
 729         purpose registers.
 730
 731 2001-05-12  H.J. Lu  <hjl@gnu.org>
 732
 733         * i386-dis.c (print_insn_i386): Always set `mod', `reg' and
 734         `rm'.
 735
 736 2001-05-12  Peter Targett  <peter.targett@arccores.com>
 737
 738         * arc-opc.c (arc_reg_names): Correct attribute for lp_count
 739         register to r/w.  Formatting fixes throughout file.
 740
 741 2001-05-12  Alan Modra  <amodra@one.net.au>
 742
 743         * i386-dis.c (prefix_user_table): Correct movq2dq, movdq2q, and
 744         movq operands.
 745         (twobyte_has_modrm): Update table.
 746         (need_modrm): Give it file scope.
 747         (MODRM_CHECK): Define.
 748         (dofloat): Use MODRM_CHECK.
 749         (OP_E): Likewise.
 750         (OP_EM): Likewise.
 751         (OP_EX): Likewise.
 752
 753 2001-05-07  Frank Ch. Eigler  <fche@redhat.com>
 754
 755         * cgen-dis.in (default_print_insn): Tolerate min<base instructions
 756         even at end of a section.
 757         * cgen-ibld.in (extract_normal): Tolerate min!=base!=max instructions
 758         by ignoring precariously-unpacked insn_value in favor of raw buffer.
 759
 760 2001-05-03  Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
 761
 762         * disassemble.c (disassembler_usage): Remove unused attribute.
 763
 764 2001-05-04  Frank Ch. Eigler  <fche@redhat.com>
 765
 766         * m32r-dis.c, -asm.c, -ibld.c: Regenerated with disassembler fixes.
 767
 768 2001-05-04  Frank Ch. Eigler  <fche@redhat.com>
 769
 770         * cgen-dis.in (print_insn): Remove call to read_insn.  Instead,
 771         assume incoming buffer already has the base insn loaded.  Handle
 772         smaller-than-base instructions for variable-length case.
 773
 774 2001-05-04  Alan Modra  <amodra@one.net.au>
 775
 776         * i386-dis.c (Ev, Ed): Remove duplicate define.
 777         (Gd): Define.
 778         (XS): Define.
 779         (OP_XS): New function.
 780         (dis386_twobyte_att): Correct pinsrw, pextrw, pmovmskb, and
 781         movmskp operands.
 782         (dis386_twobyte_intel): Likewise.
 783         (prefix_user_table): Use MS for maskmovq operand.
 784
 785 2001-04-27  Johan Rydberg  <jrydberg@opencores.org>
 786
 787         * Makefile.am: Add OpenRISC target.
 788         * Makefile.in: Regenerated.
 789
 790         * disassemble.c (disassembler): Recognize the OpenRISC disassembly.
 791
 792         * configure.in (bfd_openrisc_arch): Add target.
 793         * configure: Regenerated.
 794
 795         * openrisc-asm.c: New file.
 796         * openrisc-desc.c: Likewise.
 797         * openrisc-desc.h: Likewise.
 798         * openrisc-dis.c: Likewise.
 799         * openrisc-ibld.c: Likewise.
 800         * openrisc-opc.c: Likewise.
 801         * openrisc-opc.h: Likewise.
 802
 803 2001-04-24  Christian Groessler  <cpg@aladdin.de>
 804
 805         * z8k-dis.c: add names of control registers (ctrl_names);
 806         (seg_length): provides instruction length fixup for segmented
 807         mode; (unpack_instr): correctly handle ARG_DISP16, ARG_DISP12,
 808         CLASS_0DISP7, CLASS_1DISP7, CLASS_DISP8 and CLASS_PR cases;
 809         (unparse_intr): handle CLASS_PR, print addresses without '#'
 810         * z8k-opc.h: re-created with new z8kgen
 811         * z8kgen.c: merged in fixes which were in existing z8k-opc.h; new
 812         entries for ldctl/ldctlb instruction
 813
 814 2001-04-06  Andreas Jaeger  <aj@suse.de>
 815
 816         * i386-dis.c: Add ffreep instruction.
 817
 818 2001-03-30  Alexandre Oliva  <aoliva@redhat.com>
 819
 820         * ppc-opc.c (insert_mbe): Shift mask initializer as long.
 821
 822 2001-03-24  Alan Modra  <alan@linuxcare.com.au>
 823
 824         * i386-dis.c (PREGRP25): Define.
 825         (dis386_twobyte_att): Use here in place of "movntq" entry.
 826         (dis386_twobyte_intel): Likewise.
 827         (prefix_user_table): Add PREGRP25 entry for "movntq" and "movntdq".
 828         (PREGRP26): Define.
 829         (dis386_twobyte_att): Use here.
 830         (dis386_twobyte_intel): Likewise.
 831         (prefix_user_table): Add PREGRP26 entry for "punpcklqdq".
 832         (prefix_user_table <maskmovdqu>): XM operand, not MX.
 833         (prefix_user_table): Cosmetic changes to "bad" entries.
 834
 835 2001-03-23  Nick Clifton  <nickc@redhat.com>
 836
 837         * mips-opc.c: Remove extraneous whitespace.
 838         * mips-dis.c: Remove extraneous whitespace.
 839
 840 2001-03-22  Ben Elliston  <bje@redhat.com>
 841
 842         * cgen-asm.in (@arch@_cgen_assemble_insn): Move tmp_errmsg
 843         declaration inside CGEN_VERBOSE_ASSEMBLER_ERRORS conditional.
 844         * cgen-ibld.in (put_insn_int_value): Mark cd parameter as unused
 845         to allay a compiler warning.
 846
 847 2001-03-22  Alan Modra  <alan@linuxcare.com.au>
 848
 849         * i386-dis.c (dis386_twobyte_att): Add entries for paddq, psubq.
 850         (dis386_twobyte_intel): Likewise.
 851         (twobyte_has_modrm): Set entry for paddq, psubq.
 852
 853 2001-03-20  Patrick Macdonald  <patrickm@redhat.com>
 854
 855         * cgen-dis.in (print_insn_@arch@): Add support for target machine
 856         determination via CGEN_COMPUTE_MACH.
 857         * fr30-desc.c: Regenerate.
 858         * fr30-dis.c: Regenerate.
 859         * fr30-opc.h: Regenerate.
 860         * m32r-desc.c: Regenerate.
 861         * m32r-dis.c: Regenerate.
 862         * m32r-opc.h: Regenerate.
 863         * m32r-opinst.c: Regenerate.
 864
 865 2001-03-20  H.J. Lu  <hjl@gnu.org>
 866
 867         * configure.in: Remove the redundent AC_ARG_PROGRAM.
 868         * configure: Rebuild.
 869
 870 2001-03-19  Jim Wilson  <wilson@redhat.com>
 871
 872         * ia64-gen.c (fetch_insn_class): If xsect, then ignore comment and
 873         notestr if larger than xsect.
 874         (in_class): Handle format M5.
 875         * ia64-asmtab.c: Regnerate.
 876
 877 2001-03-19  John David Anglin  <dave@hiauly1.hia.nrc.ca>
 878
 879         * vax-dis.c (print_insn_vax): Only fetch two bytes if the info buffer
 880         has more than one byte left to read.
 881
 882 2001-03-16  Martin Schwidefsky  <schwidefsky@de.ibm.com>
 883
 884         * s390-opc.c: Add new opcodes.  Smooth out formatting.
 885         * s390-opc.txt: Add new opcodes.
 886
 887 2001-03-06  Nick Clifton  <nickc@redhat.com>
 888
 889         * arm-dis.c (print_insn_thumb): Compute destination address
 890         of BLX(1) instruction by taking bit 1 from PC and not from bit
 891         0 of the offset.
 892
 893 2001-03-06  Igor Shevlyakov  <igor@windriver.com>
 894
 895         * m68k-dis.c (print_insn_m68k): Recognize Coldfire CPUs
 896         so command line switches will work.
 897
 898 2001-03-05  Dave Brolley  <brolley@redhat.com>
 899
 900         * fr30-asm.c: Regenerate.
 901         * fr30-desc.c: Regenerate.
 902         * fr30-desc.h: Regenerate.
 903         * fr30-dis.c: Regenerate.
 904         * fr30-ibld.c: Regenerate.
 905         * fr30-opc.c: Regenerate.
 906         * fr30-opc.h: Regenerate.
 907         * m32r-asm.c: Regenerate.
 908         * m32r-desc.c: Regenerate.
 909         * m32r-desc.h: Regenerate.
 910         * m32r-dis.c: Regenerate.
 911         * m32r-ibld.c: Regenerate.
 912         * m32r-opc.c: Regenerate.
 913         * m32r-opc.h: Regenerate.
 914         * m32r-opinst.c: Regenerate.
 915
 916 2001-02-28  Igor Shevlyakov  <igor@windriver.com>
 917
 918         * m68k-opc.c: fix cpushl according to Motorola. Enable
 919         bunch of instructions for Coldfire 5407 and add all new.
 920
 921 2001-02-27  Alan Modra  <alan@linuxcare.com.au>
 922
 923         * configure.in (BFD_VERSION): Do without grep.
 924         * configure: Regenerate.
 925         * Makefile.am: Run "make dep-am".
 926         * Makefile.in: Regenerate.
 927
 928 2001-02-23  David Mosberger  <davidm@hpl.hp.com>
 929
 930         * ia64-opc-a.c: Add missing pseudo-ops for "cmp" and "cmp4".
 931         * ia64-asmtab.c: Regenerate.
 932
 933 2001-02-21  David Mosberger  <davidm@hpl.hp.com>
 934
 935         * ia64-opc-d.c (ia64_opcodes_d): Break the "add" pattern into two
 936         separate variants: one for IMM22 and the other for IMM14.
 937         * ia64-asmtab.c: Regenerate.
 938
 939 2001-02-21  Greg McGary  <greg@mcgary.org>
 940
 941         * cgen-opc.c (cgen_get_insn_value): Add missing `return'.
 942
 943 2001-02-20  H.J. Lu  <hjl@gnu.org>
 944
 945         * Makefile.am (ia64-ic.tbl): Remove the target.
 946         (ia64-raw.tbl): Likewise.
 947         (ia64-waw.tbl): Likewise.
 948         (ia64-war.tbl): Likewise.
 949         (ia64-asmtab.c): Generate it in the source directory.
 950         * Makefile.in: Regenerated.
 951
 952 2001-02-18  lars brinkhoff  <lars@nocrew.org>
 953
 954         * Makefile.am: Add PDP-11 target.
 955         * configure.in: Likewise.
 956         * disassemble.c: Likewise.
 957         * pdp11-dis.c: New file.
 958         * pdp11-opc.c: New file.
 959
 960 2001-02-14  Jim Wilson  <wilson@redhat.com>
 961
 962         * ia64-ic.tbl: Update from Intel.  Add setf to fr-writers.
 963         * ia64-asmtab.c: Regenerate.
 964
 965 Mon Feb 12 17:41:26 CET 2001  Jan Hubicka  <jh@suse.cz>
 966
 967         * i386-dis.c (prefix_user_t): Add 'Y' to SSE ineger converison
 968         instructions.
 969         (putop): Handle 'Y'
 970
 971 2001-02-11  Maciej W. Rozycki  <macro@ds2.pg.gda.pl>
 972
 973         * mips-dis.c (print_insn_arg): Use top four bits of the address of
 974         the following instruction not of the jump itself for the jump
 975         target.
 976         (print_mips16_insn_arg): Likewise.
 977
 978 2001-02-11  Michael Sokolov  <msokolov@ivan.Harhan.ORG>
 979
 980         * Makefile.am (stamp-lib): ranlib the libopcodes.a in the build
 981         directory.
 982         * Makefile.in: Regenerate.
 983
 984 2001-02-09  Schwidefsky  <schwidefsky@de.ibm.com>
 985
 986         * Makefile.am: Add linux target for S/390.
 987         * Makefile.in: Likewise.
 988         * configure.in: Likewise.
 989         * disassemble.c: Likewise.
 990         * s390-dis.c: New file.
 991         * s390-mkopc.c: New file.
 992         * s390-opc.c: New file.
 993         * s390-opc.txt: New file.
 994
 995 2001-02-05  Jim Wilson  <wilson@redhat.com>
 996
 997         * ia64-asmtab.c: Revert 2000-12-16 change.
 998
 999 2001-02-02  Patrick Macdonald  <patrickm@redhat.com>
1000
1001         * fr30-desc.h: Regenerate with CGEN_MAX_SYNTAX_ELEMENTS.
1002         * m32r-desc.h: Regenerate.
1003
1004 Thu Feb  1 16:29:06 MET 2001  Jan Hubicka  <jh@suse.cz>
1005
1006         * i386-dis.c (dis386_att, grps): Use 'T' for push/pop
1007         (putop): Handle 'T', alphabetize order, fix 'I' handling in Intel syntax
1008
1009 2001-01-14  Alan Modra  <alan@linuxcare.com.au>
1010
1011         * hppa-dis.c (print_insn_hppa): Handle '>' and '<' arg types.
1012
1013 2001-01-13  Nick Clifton  <nickc@redhat.com>
1014
1015         * disassemble.c: Remove spurious white space.
1016
1017 Sat Jan 13 01:48:24 MET 2001  Jan Hubicka  <jh@suse.cz>
1018
1019         * i386-dis.c (dis386_att, disx86_64_att): Fix ret, lret and iret
1020         templates.
1021
1022 2001-01-11  Peter Targett  <peter.targett@arccores.com>
1023
1024         * configure.in: Add arc-ext.lo for bfd_arc_arch selection.
1025         * Makefile.am (C_FILES): Add arc-ext.c.
1026         (ALL_MACHINES) Add arc-ext.lo.
1027         (INCLUDES) Add opcode directory to list.
1028         New dependency entry for arc-ext.lo.
1029         * disassemble.c (disassembler): Correct call to
1030         arc_get_disassembler.
1031         * arc-opc.c: New update for ARC, including full base
1032         instructions for ARC variants.
1033         * arc-dis.h, arc-dis.c: New update for ARC, including
1034         extensibility functionality.
1035         * arc-ext.h, arc-ext.c: New files for handling extensibility.
1036
1037 2001-01-10  Jan Hubicka  <jh@suse.cz>
1038
1039         * i386-dis.c (PREGRP15 - PREGRP24): New.
1040         (dis386_twobyt): Add SSE2 instructions.
1041         (twobyte_uses_SSE_prefix: Rename from ... ; add new SSE instructions.
1042         (twobyte_uses_f3_prefix): ... this one.
1043         (grps): Add SSE instructions.
1044         (prefix_user_table): Add two new slots; add SSE2 instructions.
1045         (print_insn_i386): Rename uses_f3_prefix to uses_SSE_prefix;
1046         Handle the REPNZ and Data16 prefixes as well; do proper lookup
1047         to prefix_user_table.
1048         (OP_E): Accept mfence and lfence as well.
1049         (OP_MMX): Data16 prefix turns MMX to SSE; support REX extensions.
1050         (OP_XMM): Support REX extensions.
1051         (OP_EM): Likewise.
1052         (OP_EX): Likewise.
1053
1054 2001-01-09  Nick Clifton  <nickc@redhat.com>
1055
1056         * arm-dis.c (print_insn): Set pc to zero for instructions with
1057         a reloc associated with them.
1058
1059 2001-01-09  Jeff Johnston  <jjohnstn@redhat.com>
1060
1061         * cgen-asm.in (parse_insn_normal): Changed syn to be
1062         CGEN_SYNTAX_CHAR_TYPE.  Changed all references to *syn
1063         as character to use CGEN_SYNTAX_CHAR macro and all comparisons
1064         to '\0' to use 0 instead.
1065         * cgen-dis.in (print_insn_normal): Ditto.
1066         * cgen-ibld.in (insert_insn_normal, extract_insn_normal): Ditto.
1067
1068 2001-01-05  Jan Hubicka  <jh@suse.cz>
1069
1070         * i386-dis.c: Add x86_64 support.
1071         (rex): New static variable.
1072         (REX_MODE64, REX_EXTX, REX_EXTY, REX_EXTZ): New constants.
1073         (USED_REX): New macro.
1074         (Ev, Ed, Rm, Iq, Iv64, Cm, Dm, Rm*, Ob64, Ov64): New macros.
1075         (OP_I64, OP_OFF64, OP_IMREG): New functions.
1076         (OP_REG, OP_OFF): Declare.
1077         (get64, get32, get32s): New functions.
1078         (r??_reg): New constants.
1079         (dis386_att): Change templates of instruction implicitly promoted
1080         to 64bit; change e?? to RMe?? for unwind RM byte instructions.
1081         (grps): Likewise.
1082         (dis386_intel): Likewise.
1083         (dixx86_64_att): New table based on dis386_att.
1084         (dixx86_64_intel): New table based on dis386_intel.
1085         (names64, names8rex): New global variable.
1086         (names32, names16): Add extended registers.
1087         (prefix_user_t): Recognize rex prefixes.
1088         (prefix_name): Print REX prefixes nicely.
1089         (op_riprel): New global variable.
1090         (start_pc): Set type to bfd_vma.
1091         (print_insn_i386): Detect the 64bit mode and use proper table;
1092         move ckprefix after initializing the buffer; output unused rex prefixes;
1093         output information about target of RIP relative addresses.
1094         (putop): Support 'O' and 'I'. Update handling of "P', 'Q', 'R' and 'S';
1095         (print_operand_value): New function.
1096         (OP_E, OP_G, OP_REG, OP_I, OP_J, OP_DIR, OP_OFF, OP_D): Add support for
1097         REX prefix and new modes.
1098         (get64, get32s): New.
1099         (get32): Return bfd_signed_vma type.
1100         (set_op): Initialize the op_riprel.
1101         * disassemble.c (disassembler): Recognize the x86-64 disassembly.
1102
1103 2001-01-03  Richard Sandiford  <r.sandiford@redhat.com>
1104
1105          cgen-dis.in (read_insn): Use bfd_get_bits()
1106
1107 2001-01-02  Richard Sandiford  <rsandifo@redhat.com>
1108
1109         * cgen-dis.c (hash_insn_array): Use bfd_put_bits().
1110         (hash_insn_list): Likewise
1111         * cgen-ibld.in (insert_1): Use bfd_put_bits() and bfd_get_bits().
1112         (extract_1): Use bfd_get_bits().
1113         (extract_normal): Apply sign extension to both extraction
1114         methods.
1115         * cgen-opc.c (cgen_get_insn_value): Use bfd_get_bits()
1116         (cgen_put_insn_value): Use bfd_put_bits()
1117
1118 2000-12-28  Frank Ch. Eigler  <fche@redhat.com>
1119
1120         * cgen-asm.in (parse_insn_normal): Print better error message for
1121         instructions with missing operands.
1122
1123 2000-12-21  Santeri Paavolainen <santtu@ssh.com>
1124
1125         * cgen-opc.c: Include alloca.h if HAVE_ALLOCA_H is defined.
1126
1127 2000-12-16  Nick Clifton  <nickc@redhat.com>
1128
1129         * Makefile.in: Regenerate.
1130         * aclocal.m4: Regenerate.
1131         * config.in: Regenerate.
1132         * configure.in: Add spacing.
1133         * configure: Regenerate.
1134         * ia64-asmtab.c: Regenerate.
1135         * po/opcodes.pot: Regenerate.
1136
1137 2000-12-12  Frank Ch. Eigler  <fche@redhat.com>
1138
1139         * cgen-asm.in (@arch@_cgen_assemble_insn): Prefer printing insert-time
1140         error messages over later parse-time ones.
1141
1142 2000-12-12  Jim Wilson  <wilson@redhat.com>
1143
1144         * ia64-dis.c (print_insn_ia64): Cast away const on ia64_free_opcode
1145         argument.
1146         * ia64-gen.c (insert_deplist): Cast sizeof result to int.
1147         (print_dependency_table): Print NULL if semantics field not set.
1148         (insert_opcode_dependencies): Mark cmp parameter as unused.
1149         (print_main_table): Use fprintf_vma to print long long fields.
1150         (main): Mark argv paramter as unused.  Convert to old style definition.
1151         * ia64-opc.c (ia64_find_dependency): Cast sizeof result to int.
1152         * ia64-asmtab.c: Regnerate.
1153
1154 2000-12-09  Nick Clifton  <nickc@redhat.com>
1155
1156         * m32r-dis.c (print_insn): Prevent re-read of instruction from
1157         wrong address.
1158
1159         * fr30-dis.c: Regenerate.
1160
1161 2000-12-08  Peter Targett  <peter.targett@arccores.com>
1162
1163         * configure.in: Add arc-ext.lo for bfd_arc_arch selection.
1164         * Makefile.am (C_FILES): Add arc-ext.c.
1165         (ALL_MACHINES) Add arc-ext.lo.
1166         (INCLUDES) Add opcode directory to list.
1167         New dependency entry for arc-ext.lo.
1168         * disassemble.c (disassembler): Correct call to
1169         arc_get_disassembler.
1170         * arc-opc.c: New update for ARC, including full base
1171         instructions for ARC variants.
1172         * arc-dis.h, arc-dis.c: New update for ARC, including
1173         extensibility functionality.
1174         * arc-ext.h, arc-ext.c: New files for handling extensibility.
1175
1176 2000-12-03  Chris Demetriou   cgd@sibyte.com
1177
1178         * mips-opc.c (mips_builtin_opcodes): Use the WR_HILO, RD_HILO,
1179         MOD_HILO, and MOD_LO macros.
1180
1181         * mips-opc.c (M1, M2): Delete.
1182         (mips_builtin_opcodes): Remove all uses of M1.
1183
1184         * mips-opc.c (mips_builtin_opcodes): Make the dmfc2 and dmtc2
1185         instructions take "G" format second operands and use the
1186         correct flags.
1187         There are mfc3 and mtc3 opcodes, so add dmfc3 and dmtc3 opcodes to
1188         match.
1189         Delete "sel" code operands from mfc1 and mtc1.
1190         Add MIPS64 opcode changes (dclo, dclz), and "sel" code variants
1191         for dm[ft]c[023].
1192
1193 2000-12-03  Ed Satterthwaite  ehs@sibyte.com  and
1194             Chris Demetriou   cgd@sibyte.com
1195
1196         * mips-opc.c (mips_builtin_opcodes): Finish additions
1197         for MIPS32 support, and clean up existing entries for
1198         aesthetics, consistency with the MIPS32 ISA, and
1199         with consistency the rest of the table.
1200
1201 2000-12-01  Nick Clifton  <nickc@redhat.com>
1202
1203         * mips16-opc.c (mips16_opcodes): Add initialiser for membership
1204         field.
1205
1206 2000-12-01  Chris Demetriou <cgd@sibyte.com>
1207
1208         mips-dis.c (print_insn_arg): Handle new 'U' and 'J' argument
1209         specifiers.  Update 'B' for new constant names, and remove
1210         'm'.
1211         mips-opc.c (mips_builtin_opcodes): Place "pref" and "ssnop"
1212         near the top of the array, so they are disassembled properly.
1213         Enable "ssnop" for MIPS32.  Add "break" variant with 20 bit
1214         code for MIPS32.  Update "clo" and "clz" to use 'U' operand
1215         specifier.  Add 'H' format specifier variants for "mfc1,"
1216         "mfc2," "mfc3," "mtc1," "mtc2," and "mtc3" for MIPS32.  Update
1217         MIPS32 "sdbbp" to use 'B' operand specifier.  Add MIPS32
1218         "wait" variant which uses 'J' operand specifier.
1219
1220         * mips-dis.c (set_mips_isa_type): Update to use
1221         CPU_UNKNOWN and ISA_* constants.  Add bfd_mach_mips32 case.
1222         Replace bfd_mach_mips4K with bfd_mach_mips32_4k case.
1223         * mips-opc.c (I32): New constant for instructions added in
1224         MIPS32.
1225         (P4): Delete.
1226         (mips_builtin_opcodes) Replace all uses of P4 with I32.
1227
1228         * mips-dis.c (set_mips_isa_type): Add cases for
1229         bfd_mach_mips5 and bfd_mach_mips64.
1230         * mips-opc.c (I64): New definitions.
1231
1232         * mips-dis.c (set_mips_isa_type): Add case for
1233         bfd_mach_mips_sb1.
1234
1235 2000-11-28  Hans-Peter Nilsson  <hp@bitrange.com>
1236
1237         * sh-dis.c (print_insn_ddt): Make insn_x, insn_y unsigned.
1238         (print_insn_ppi): Make nib1, nib2, nib3 unsigned.
1239         Initialize variable dc to NULL.
1240         (print_insn_shx): Remove unused label d_reg_n.
1241
1242 2000-11-24  Nick Clifton  <nickc@redhat.com>
1243
1244         * arm-opc.h: Add new opcode formatting parameter 'B'.
1245         (arm_opcodes): Add XScale, v5, and v5te instructions.
1246         (thumb_opcodes): Add v5t instructions.
1247
1248         * arm-dis.c (print_insn_arm): Handle new 'B' format
1249         parameter.
1250         (print_insn_thumb): Decode BLX(1) instruction.
1251
1252 2000-11-21  Chris Demetriou  <cgd@sibyte.com>
1253
1254         * mips-opc.c: Fix file header comment.
1255
1256 2000-11-14  Hans-Peter Nilsson  <hp@axis.com>
1257
1258         * cris-dis.c (cris_get_disassembler): If abfd is NULL, return
1259         print_insn_cris_with_register_prefix.
1260
1261 2000-11-11  Alexandre Oliva  <aoliva@redhat.com>
1262
1263         * sh-opc.h: The operand of `mov.w r0, (<disp>,GBR)' is IMM1, not 0.
1264
1265 2000-11-07  Matthew Green  <mrg@redhat.com>
1266
1267         * cgen-dis.in (print_insn): All insns which can fit into insn_value
1268         must be loaded there in their entirety.
1269
1270 2000-10-20  Jakub Jelinek  <jakub@redhat.com>
1271
1272         * sparc-dis.c (v9a_asr_reg_names): Add v9b ASRs.
1273         (compute_arch_mask): Add v8plusb and v9b machines.
1274         (print_insn_sparc): siam mode decoding, accept ASRs up to 25.
1275         * sparc-opc.c: Support for Cheetah instruction set.
1276         (prefetch_table): Add #invalidate.
1277
1278 2000-10-16  Nick Clifton  <nickc@redhat.com>
1279
1280         * mcore-dis.c (imsk): Change mask for OC to 0xFE00.
1281
1282 2000-10-06  Dave Brolley  <brolley@redhat.com>
1283
1284         * fr30-desc.h: Regenerate.
1285         * m32r-desc.h: Regenerate.
1286         * m32r-ibld.c: Regenerate.
1287
1288 2000-10-05  Jim Wilson  <wilson@redhat.com>
1289
1290         * ia64-ic.tbl: Update from Intel.
1291         * ia64-asmtab.c: Regenerate.
1292
1293 2000-10-04  Kazu Hirata  <kazu@hxi.com>
1294
1295         * ia64-gen.c: Convert C++-style comments to C-style comments.
1296         * tic54x-dis.c: Likewise.
1297
1298 2000-09-29  Hans-Peter Nilsson  <hp@axis.com>
1299
1300         Changes to add dollar prefix to registers for files where user symbols
1301         don't have a leading underscore.  Fix formatting.
1302         * cris-dis.c (REGISTER_PREFIX_CHAR): New.
1303         (format_reg): Add parameter with_reg_prefix.  All callers changed.
1304         (print_with_operands): Ditto.
1305         (print_insn_cris_generic): Renamed from print_insn_cris, add
1306         parameter with_reg_prefix.
1307         (print_insn_cris_with_register_prefix,
1308         print_insn_cris_without_register_prefix, cris_get_disassembler):
1309         New.
1310         * disassemble.c (disassembler) [ARCH_cris]: Call cris_get_disassembler.
1311
1312 2000-09-22  Jim Wilson  <wilson@redhat.com>
1313
1314         * ia64-opc-f.c (ia64_opcodes_f): Add fpcmp pseudo-ops for
1315         gt, ge, ngt, and nge.
1316         * ia64-asmtab.c: Regenerate.
1317
1318         * ia64-dis.c (print_insn_ia64): Revert Aug 7 byte skip count change.
1319         * ia64-gen.c (parse_semantics): Handle IA64_DVS_STOP.
1320         (lookup_specifier): Handle "PR%, 1 to 15" and "PR%, 16 to 62".
1321         * ia64-ic.tbl, ia64-raw.tbl, ia64-war.tbl, ia64-waw.tbl: Update.
1322         * ia64-asmtab.c: Regnerate.
1323
1324 2000-09-13  Anders Norlander  <anorland@acc.umu.se>
1325
1326         * mips-opc.c (mips_builtin_opcodes): Support cache instruction on 4K cores.
1327         Add mfc0 and mtc0 with sub-selection values.
1328         Add clo and clz opcodes.
1329         Add msub and msubu instructions for MIPS32.
1330         Add madd/maddu aliases for mad/madu for MIPS32.
1331         Support wait, deret, eret, movn, pref for MIPS32.
1332         Support tlbp, tlbr, tlbwi, tlbwr.
1333         (P4): New define.
1334
1335         * mips-dis.c (print_insn_arg): Print sdbbp 'm' args.
1336         (print_insn_arg): Handle 'H' args.
1337         (set_mips_isa_type): Recognize 4K.
1338         Use CPU_* defines instead of hardcoded numbers.
1339
1340 2000-09-11  Catherine Moore <clm@redhat.com>
1341
1342         * d30v-opc.c (d30v_operand_t): New operand type Rb2.
1343         (d30v_format_tab): Use Rb2 for modinc and moddec.
1344
1345 2000-09-07  Catherine Moore  <clm@redhat.com>
1346
1347         * d30v-opc.c (d30v_format_tab): Use format Ra for
1348         modinc and moddec.
1349
1350 2000-09-06  Alexandre Oliva  <aoliva@redhat.com>
1351
1352         * configure: Rebuilt with new libtool.m4.
1353
1354 2000-09-05  Nick Clifton  <nickc@redhat.com>
1355
1356         * configure: Regenerate.
1357         * po/opcodes.pot: Regenerate.
1358
1359 2000-08-31  Alexandre Oliva  <aoliva@redhat.com>
1360
1361         * acinclude.m4: Include libtool and gettext macros from the
1362         top level.
1363         * aclocal.m4, configure: Rebuilt.
1364
1365 2000-08-30  Kazu Hirata  <kazu@hxi.com>
1366
1367         * tic80-dis.c: Fix formatting.
1368
1369 2000-08-29  Kazu Hirata  <kazu@hxi.com>
1370
1371         * w65-dis.c: Fix formatting.
1372
1373 2000-08-28  Mark Hatle  <mhatle@mvista.com>
1374
1375         * ppc-opc.c: Add XTLB macro for a few PPC 4xx extended mnemonics.
1376         (powerpc_opcodes): Add table entries for PPC 405 instructions.
1377         Changed rfci, icbt, mfdcr, dccci, mtdcr, iccci from PPC to PPC403
1378         instructions.  Added extended mnemonic mftbl as defined in the
1379         405GP manual for all PPCs.
1380
1381 2000-08-28  Jim Wilson  <wilson@redhat.com>
1382
1383         * ia64-dis.c (print_insn_ia64): Add failed label after ia64_free_opcode
1384         call.  Change last goto to use failed instead of done.
1385
1386 2000-08-28  Dave Brolley  <brolley@redhat.com>
1387
1388         * cgen-ibld.in (cgen_put_insn_int_value): New function.
1389         (insert_normal): Allow for non-zero word_offset with CGEN_INT_INSN_P.
1390         (insert_insn_normal): Use cgen_put_insn_int_value with CGEN_INT_INSN_P.
1391         (extract_normal): Allow for non-zero word_offset with CGEN_INT_INSN_P.
1392         * cgen-dis.in (read_insn): New static function.
1393         (print_insn): Use read_insn to read the insn into the buffer and set
1394         up for disassembly.
1395         (print_insn): in CGEN_INT_INSN_P, make sure that the entire insn is
1396         in the buffer.
1397         * fr30-asm.c: Regenerated.
1398         * fr30-desc.c: Regenerated.
1399         * fr30-desc.h: Regenerated.
1400         * fr30-dis.c: Regenerated.
1401         * fr30-ibld.c: Regenerated.
1402         * fr30-opc.c: Regenerated.
1403         * fr30-opc.h: Regenerated.
1404         * m32r-asm.c: Regenerated.
1405         * m32r-desc.c: Regenerated.
1406         * m32r-desc.h: Regenerated.
1407         * m32r-dis.c: Regenerated.
1408         * m32r-ibld.c: Regenerated.
1409         * m32r-opc.c: Regenerated.
1410
1411 2000-08-28  Kazu Hirata  <kazu@hxi.com>
1412
1413         * tic30-dis.c: Fix formatting.
1414
1415 2000-08-27  Kazu Hirata  <kazu@hxi.com>
1416
1417         * sh-dis.c: Fix formatting.
1418
1419 2000-08-24  David Edelsohn  <dje@watson.ibm.com>
1420
1421         * ppc-opc.c (powerpc_opcodes): Add rfid, mtsrd, mtsrdin, mtmsrd.
1422
1423 2000-08-24  Kazu Hirata  <kazu@hxi.com>
1424
1425         * z8k-dis.c: Fix formatting.
1426
1427 2000-08-16  Jim Wilson  <wilson@redhat.com>
1428
1429         * ia64-ic.tbl (pr-readers-nobr-nomovpr): Add addl, adds.  Delete
1430         break, mov-immediate, nop.
1431         * ia64-opc-f.c: Delete fpsub instructions.
1432         * ia64-opc-m.c: Add POSTINC to all instructions with postincrement
1433         address operand.  Rewrite using macros to avoid long lines.
1434         * ia64-opc.h (POSTINC): Define.
1435         * ia64-asmtab.c: Regenerate.
1436
1437 2000-08-15  Jim Wilson  <wilson@redhat.com>
1438
1439         * ia64-ic.tbl: Add missing entries.
1440
1441 2000-08-08  Jason Eckhardt  <jle@redhat.com>
1442
1443         * i860-dis.c (print_br_address): Change third argument from int
1444         to long.
1445
1446 2000-08-07  Richard Henderson  <rth@redhat.com>
1447
1448         * ia64-dis.c (print_insn_ia64): Get byte skip count correct
1449         for MLI templates.  Handle IA64_OPND_TGT64.
1450
1451 2000-08-04  Ben Elliston  <bje@redhat.com>
1452
1453         * cgen-dis.in, cgen-asm.in, cgen-ibld.in: New files.
1454         * cgen.sh: Likewise.
1455
1456 2000-08-02  Jim Wilson  <wilson@redhat.com>
1457
1458         * ia64-dis.c (print_insn_ia64): Call ia64_free_opcode at end.
1459
1460 2000-07-29  Marek Michalkiewicz  <marekm@linux.org.pl>
1461
1462         * avr-dis.c (avr_operand): Use PARAMS macro in declaration.
1463         Change return type from void to int.  Check the combination
1464         of operands, return 1 if valid.  Fix to avoid BUF overflow.
1465         Report undefined combinations of operands in COMMENT.
1466         Report internal errors to stderr.  Output the adiw/sbiw
1467         constant operand in both decimal and hex.
1468         (print_insn_avr): Disassemble ldd/std with displacement of 0
1469         as ld/st.  Check avr_operand () return value, handle invalid
1470         combinations of operands like unknown opcodes.
1471
1472 2000-07-28  Ben Elliston  <bje@redhat.com>
1473
1474         * Makefile.am (CGEN, CGENDEPS, CGENDIR, CGENFLAGS): New.
1475         (run-cgen, stamp-m32r, stamp-fr30): New targets.
1476         * Makefile.in: Regenerate.
1477         * configure.in: Add --enable-cgen-maint option.
1478         * configure: Regenerate.
1479
1480 2000-07-26  Dave Brolley  <brolley@redhat.com>
1481
1482         * cgen-opc.c (cgen_hw_lookup_by_name): 'i' is now unsigned.
1483         (cgen_hw_lookup_by_num): Ditto.
1484         (cgen_operand_lookup_by_name): Ditto.
1485         (print_address): Ditto.
1486         (print_keyword): Ditto.
1487         * cgen-dis.c (hash_insn_array): Mark unused parameters with
1488         ATTRIBUTE_UNUSED.
1489         * cgen-asm.c (hash_insn_array): Mark unused parameters with
1490         ATTRIBUTE_UNUSED.
1491         (cgen_parse_keyword): Ditto.
1492
1493 2000-07-22  Jason Eckhardt  <jle@redhat.com>
1494
1495         * i860-dis.c: New file.
1496         (print_insn_i860): New function.
1497         (print_br_address): New function.
1498         (sign_extend): New function.
1499         (BITWISE_OP): New macro.
1500         (I860_REG_PREFIX): New macro.
1501         (grnames, frnames, crnames): New structures.
1502
1503         * disassemble.c (ARCH_i860): Define.
1504         (disassembler): Add check for bfd_arch_i860 to set disassemble
1505         function to print_insn_i860.
1506
1507         * Makefile.in (CFILES): Added i860-dis.c.
1508         (ALL_MACHINES): Added i860-dis.lo.
1509         (i860-dis.lo): New dependences.
1510
1511         * configure.in: New bits for bfd_i860_arch.
1512
1513         * configure: Regenerated.
1514
1515 2000-07-20  Hans-Peter Nilsson  <hp@axis.com>
1516
1517         * Makefile.am (CFILES): Add cris-dis.c and cris-opc.c.
1518         (ALL_MACHINES): Add cris-dis.lo and cris-opc.lo.
1519         (cris-dis.lo, cris-opc.lo): New rules.
1520         * Makefile.in: Rebuild.
1521         * configure.in (bfd_cris_arch): New target.
1522         * configure: Rebuild.
1523         * disassemble.c (ARCH_cris): Define.
1524         (disassembler): Support ARCH_cris.
1525         * cris-dis.c, cris-opc.c: New files.
1526         * po/POTFILES.in, po/opcodes.pot: Regenerate.
1527
1528 2000-07-11  Jakub Jelinek  <jakub@redhat.com>
1529
1530         * sparc-opc.c (sparc_opcodes): popc has 0 in rs1, not rs2.
1531         Reported by Bill Clarke <llib@computer.org>.
1532
1533 2000-07-09  Geoffrey Keating  <geoffk@redhat.com>
1534
1535         * ppc-opc.c (powerpc_opcodes): Correct suffix for vslw.
1536         Patch by Randall J Fisher <rfisher@ecn.purdue.edu>.
1537
1538 2000-07-09  Alan Modra  <alan@linuxcare.com.au>
1539
1540         * hppa-dis.c (fput_reg, fput_fp_reg, fput_fp_reg_r, fput_creg,
1541         fput_const, extract_3, extract_5_load, extract_5_store,
1542         extract_5r_store, extract_5R_store, extract_10U_store,
1543         extract_5Q_store, extract_11, extract_14, extract_16, extract_21,
1544         extract_12, extract_17, extract_22): Prototype.
1545         (print_insn_hppa): Rename inner block opcode -> opc to avoid
1546         shadowing outer block.
1547         (GET_BIT): Define.
1548
1549 2000-07-05  DJ Delorie  <dj@redhat.com>
1550
1551         * MAINTAINERS: new
1552
1553 2000-07-04  Alexandre Oliva  <aoliva@redhat.com>
1554
1555         * arm-dis.c (print_insn_arm): Output combinations of PSR flags.
1556
1557 2000-07-03  Marek Michalkiewicz  <marekm@linux.org.pl>
1558
1559         * avr-dis.c (avr_operand): Change _ () to _() around all strings
1560         marked for translation (exception from the usual coding style).
1561         (print_insn_avr): Initialize insn2 to avoid warnings.
1562
1563 2000-07-03  Kazu Hirata  <kazu@hxi.com>
1564
1565         * h8300-dis.c (bfd_h8_disassemble): Improve readability.
1566         * h8500-dis.c: Fix formatting.
1567
1568 2000-07-01  Alan Modra  <alan@linuxcare.com.au>
1569
1570         * Makefile.am (DEP): Fix 2000-06-22.  grep after running dep.sed
1571         (CLEANFILES): Add DEPA.
1572         * Makefile.in: Regenerate.
1573
1574 2000-06-26  Scott Bambrough  <scottb@netwinder.org>
1575
1576         * arm-dis.c (regnames): Add an additional register set to match
1577         the set used by GCC.  Make it the default.
1578
1579 2000-06-22  Alan Modra  <alan@linuxcare.com.au>
1580
1581         * Makefile.am (DEP): grep for leading `/' in DEP1, and fail if we
1582         find one.
1583         * Makefile.in: Regenerate.
1584
1585 2000-06-20  H.J. Lu  <hjl@gnu.org>
1586
1587         * Makefile.am: Rebuild dependency.
1588         * Makefile.in: Rebuild.
1589
1590 2000-06-18  Stephane Carrez  <stcarrez@worldnet.fr>
1591
1592         * Makefile.in, configure: regenerate
1593         * disassemble.c (disassembler): Recognize ARCH_m68hc12,
1594         ARCH_m68hc11.
1595         * m68hc11-dis.c (read_memory, print_insn, print_insn_m68hc12):
1596         New functions.
1597         * configure.in: Recognize m68hc12 and m68hc11.
1598         * m68hc11-dis.c, m68hc11-opc.c: New files for support of m68hc1x
1599         * Makefile.am (CFILES, ALL_MACHINES): New files for disassembly
1600         and opcode generation for m68hc11 and m68hc12.
1601
1602 2000-06-16  Nick Duffek  <nsd@redhat.com>
1603
1604         * disassemble.c (disassembler): Refer to the PowerPC 620 using
1605         bfd_mach_ppc_620 instead of 620.
1606
1607 2000-06-12  Kazu Hirata  <kazu@hxi.com>
1608
1609         * h8300-dis.c: Fix formatting.
1610         (bfd_h8_disassemble): Distinguish adds/subs, inc/dec.[wl]
1611         correctly.
1612
1613 2000-06-09  Denis Chertykov  <denisc@overta.ru>
1614
1615         * avr-dis.c (avr_operand): Bugfix for jmp/call address.
1616
1617 2000-06-07  Denis Chertykov  <denisc@overta.ru>
1618
1619         * avr-dis.c: completely rewritten.
1620
1621 2000-06-02  Kazu Hirata  <kazu@hxi.com>
1622
1623         * h8300-dis.c: Follow the GNU coding style.
1624         (bfd_h8_disassemble) Fix a typo.
1625
1626 2000-06-01  Kazu Hirata  <kazu@hxi.com>
1627
1628         * h8300-dis.c (bfd_h8_disassemble_init): Fix a typo.
1629         (bfd_h8_disassemble): Distinguish the operand size of inc/dev.[wl]
1630         correctly.  Fix a typo.
1631
1632 2000-05-31  Nick Clifton  <nickc@redhat.com>
1633
1634         * opintl.h (_(String)): Explain why dgettext is used instead of
1635         gettext.
1636
1637 2000-05-30  Nick Clifton  <nickc@redhat.com>
1638
1639         * opintl.h (gettext, dgettext, dcgettext, textdomain,
1640         bindtextdomain): Replace defines with those from intl/libgettext.h
1641         to quieten gcc warnings.
1642
1643 2000-05-26  Alan Modra  <alan@linuxcare.com.au>
1644
1645         * Makefile.am: Update dependencies with "make dep-am"
1646         * Makefile.in: Regenerate.
1647
1648 2000-05-25  Alexandre Oliva  <aoliva@redhat.com>
1649
1650         * m10300-dis.c (disassemble): Don't assume 32-bit longs when
1651         sign-extending operands.
1652
1653 2000-05-15  Donald Lindsay  <dlindsay@redhat.com>
1654
1655         * d10v-opc.c (d10v_opcodes): add ALONE tag to all short branches
1656         except brf's.
1657
1658 2000-05-21  Nick Clifton  <nickc@redhat.com>
1659
1660         * Makefile.am (LIBIBERTY): Define.
1661
1662 2000-05-19 Diego Novillo <dnovillo@redhat.com>
1663
1664         * mips-dis.c (REGISTER_NAMES): Rename to STD_REGISTER_NAMES.
1665         (STD_REGISTER_NAMES): New name for REGISTER_NAMES.
1666         (reg_names): Rename to std_reg_names. Change it to a char **
1667         static variable.
1668         (std_reg_names): New name for reg_names.
1669         (set_mips_isa_type): Set reg_names to point to std_reg_names by
1670         default.
1671
1672 2000-05-16  Frank Ch. Eigler  <fche@redhat.com>
1673
1674         * fr30-desc.h: Partially regenerated to account for changed
1675         CGEN_MAX_* -> CGEN_ACTUAL_MAX_* macros.
1676         * m32r-desc.h: Ditto.
1677
1678 2000-05-15  Nick Clifton  <nickc@redhat.com>
1679
1680         * arm-opc.h: Use upper case for flasg in MSR and MRS
1681         instructions.  Allow any bit to be set in the field_mask of
1682         the MSR instruction.
1683
1684         * arm-dis.c (print_insn_arm): Decode _x and _s bits of the
1685         field_mask of an MSR instruction.
1686
1687 2000-05-11  Thomas de Lellis  <tdel@windriver.com>
1688
1689         * arm-opc.h: Disassembly of thumb ldsb/ldsh
1690         instructions changed to ldrsb/ldrsh.
1691
1692 2000-05-11  Ulf Carlsson  <ulfc@engr.sgi.com>
1693
1694         * mips-dis.c (print_insn_arg): Don't mask top 32 bits of 64-bit
1695         target addresses for 'jal' and 'j'.
1696
1697 2000-05-10  Geoff Keating  <geoffk@redhat.com>
1698
1699         * ppc-opc.c (powerpc_opcodes): Make the predicted-branch opcodes
1700         also available in common mode when powerpc syntax is being used.
1701
1702 2000-05-08  Alan Modra  <alan@linuxcare.com.au>
1703
1704         * m68k-dis.c (dummy_printer): Add ATTRIBUTE_UNUSED to args.
1705         (dummy_print_address): Ditto.
1706
1707 2000-05-04  Timothy Wall  <twall@redhat.com>
1708
1709         * tic54x-opc.c: New.
1710         * tic54x-dis.c: New.
1711         * disassemble.c (disassembler): Add ARCH_tic54x.
1712         * configure.in: Added tic54x target.
1713         * configure: Ditto.
1714         * Makefile.am: Add tic54x dependencies.
1715         * Makefile.in: Ditto.
1716
1717 2000-05-03  J.T. Conklin  <jtc@redback.com>
1718
1719         * ppc-opc.c (VA, VB, VC, VD, VS, SIMM, UIMM, SHB): New macros, for
1720         vector unit operands.
1721         (VX, VX_MASK, VXA, VXA_MASK, VXR, VXR_MASK): New macros, for vector
1722         unit instruction formats.
1723         (PPCVEC): New macro, mask for vector instructions.
1724         (powerpc_operands): Add table entries for above operand types.
1725         (powerpc_opcodes): Add table entries for vector instructions.
1726
1727         * ppc-dis.c (print_insn_big_powerpc): Add PPC_OPCODE_ALTIVEC to mask.
1728         (print_insn_little_powerpc): Likewise.
1729         (print_insn_powerpc): Prepend 'v' when printing vector registers.
1730
1731 2000-04-24  Clinton Popetz  <cpopetz@redhat.com>
1732
1733         * configure.in: Add bfd_powerpc_64_arch.
1734         * disassemble.c (disassembler): Use print_insn_big_powerpc for
1735         64 bit code.
1736
1737 2000-04-24  Nick Clifton  <nickc@redhat.com>
1738
1739         * fr30-desc.c (fr30_cgen_cpu_open): Initialise signed_overflow
1740         field.
1741
1742 2000-04-23  Denis Chertykov  <denisc@overta.ru>
1743
1744         * avr-dis.c (reg_fmul_d): New. Extract destination register from
1745         FMUL instruction.
1746         (reg_fmul_r): New. Extract source register from FMUL instruction.
1747         (reg_muls_d): New. Extract destination register from MULS instruction.
1748         (reg_muls_r): New. Extract source register from MULS instruction.
1749         (reg_movw_d): New. Extract destination register from MOVW instruction.
1750         (reg_movw_r): New. Extract source register from MOVW instruction.
1751         (print_insn_avr): Handle MOVW, MULS, MULSU, FMUL, FMULS, FMULSU,
1752         EICALL, EIJMP, LPM r,Z, ELPM r,Z, SPM, ESPM instructions.
1753
1754 2000-04-22  Timothy Wall  <twall@redhat.com>
1755
1756         * ia64-gen.c (general): Add an ordered table of primary
1757         opcode names, as well as priority fields to disassembly data
1758         structures to enforce a preferred disassembly format based on the
1759         ordering of the opcode tables.
1760         (load_insn_classes): Show a useful message if IC tables are missing.
1761         (load_depfile): Ditto.
1762         * ia64-asmtab.h (struct ia64_dis_names ): Add priority flag to
1763         distinguish preferred disassembly.
1764         * ia64-opc-f.c: Reorder some insn for preferred disassembly
1765         format.  Fix incorrect flag on fma.s/fma.s.s0.
1766         * ia64-opc.c: Scan *all* disassembly matches and use the one with
1767         the highest priority.
1768         * ia64-opc-b.c: Use more abbreviations.
1769         * ia64-asmtab.c: Regenerate.
1770
1771 2000-04-21  Jason Eckhardt  <jle@redhat.com>
1772
1773         * hppa-dis.c (extract_16): New function.
1774         (print_insn_hppa): Fix incorrect handling of 'fe'. Added handling of
1775         new operand types l,y,&,fe,fE,fx.
1776
1777 2000-04-21  Richard Henderson  <rth@redhat.com>
1778             David Mosberger  <davidm@hpl.hp.com>
1779             Timothy Wall <twall@redhat.com>
1780             Bob Manson  <manson@charmed.cygnus.com>
1781             Jim Wilson  <wilson@redhat.com>
1782
1783         * Makefile.am (HFILES): Add ia64-asmtab.h, ia64-opc.h.
1784         (CFILES): Add ia64-dis.c, ia64-opc-a.c, ia64-opc-b.c, ia64-opc-f.c,
1785         ia64-opc-i.c, ia64-opc-m.c, ia64-opc-d.c, ia64-opc.c, ia64-gen.c,
1786         ia64-asmtab.c.
1787         (ALL_MACHINES): Add ia64-dis.lo, ia64-opc.lo.
1788         (ia64-ic.tbl, ia64-raw.tbl, ia64-waw.tbl, ia64-war.tbl, ia64-gen,
1789         ia64-gen.o, ia64-asmtab.c, ia64-dis.lo, ia64-opc.lo): New rules.
1790         * Makefile.in: Rebuild.
1791         * configure Rebuild.
1792         * configure.in (bfd_ia64_arch): New target.
1793         * disassemble.c (ARCH_ia64): Define.
1794         (disassembler): Support ARCH_ia64.
1795         * ia64-asmtab.c, ia64-asmtab.h, ia64-dis.c, ia64-gen.c ia64-ic.tbl,
1796         ia64-opc-a.c, ia64-opc-b.c, ia64-opc-d.c ia64-opc-f.c, ia64-opc-i.c,
1797         ia64-opc-m.c, ia64-opc-x.c, ia64-opc.c, ia64-opc.h, ia64-raw.tbl,
1798         ia64-war.tbl, ia64-waw.tbl: New files.
1799
1800 2000-04-20  Alexandre Oliva  <aoliva@redhat.com>
1801
1802         * m10300-dis.c (HAVE_AM30, HAVE_AM33): Define.
1803         (disassemble): Use them.
1804
1805 2000-04-14  Alan Modra  <alan@linuxcare.com.au>
1806
1807         * sysdep.h: Include "ansidecl.h" not <ansidecl.h>
1808         * Makefile.am: Update dependencies.
1809         * Makefile.in: Regenerate.
1810
1811 2000-04-14  Michael Sokolov  <msokolov@ivan.Harhan.ORG>
1812
1813         * a29k-dis.c, alpha-dis.c, alpha-opc.c, arc-dis.c, arc-opc.c,
1814         avr-dis.c, d10v-dis.c, d10v-opc.c, d30v-dis.c, d30v-opc.c,
1815         disassemble.c, h8300-dis.c, h8500-dis.c, hppa-dis.c, i370-dis.c,
1816         i370-opc.c, i960-dis.c, m10200-dis.c, m10200-opc.c, m10300-dis.c,
1817         m10300-opc.c, m68k-dis.c, m68k-opc.c, m88k-dis.c, mcore-dis.c,
1818         mips-dis.c, mips-opc.c, mips16-opc.c, pj-dis.c, pj-opc.c,
1819         ppc-dis.c, ppc-opc.c, sh-dis.c, sparc-dis.c, sparc-opc.c,
1820         tic80-dis.c, tic80-opc.c, v850-dis.c, v850-opc.c, vax-dis.c,
1821         w65-dis.c, z8k-dis.c, z8kgen.c: Include sysdep.h.  Remove
1822         ansidecl.h as sysdep.h includes it.
1823
1824 2000-04-7  Andrew Cagney  <cagney@b1.redhat.com>
1825
1826         * configure.in (WARN_CFLAGS): Set to -W -Wall by default.  Add
1827         --enable-build-warnings option.
1828         * Makefile.am (AM_CFLAGS, WARN_CFLAGS): Add definitions.
1829         * Makefile.in, configure: Re-generate.
1830
1831 2000-04-05  J"orn Rennecke <amylaar@redhat.com>
1832
1833         * sh-opc.h (sh_table): Use A_DISP_PC / PCRELIMM_8BY2 for ldre & ldrs.
1834         stc GBR,@-<REG_N> is available for arch_sh1_up.
1835         Group parallel processing insn with identical mnemonics together.
1836         Make three-operand psha / pshl come first.
1837
1838 2000-04-05  J"orn Rennecke <amylaar@redhat.co.uk>
1839
1840         * sh-opc.h (sh_nibble_type): Remove DISP_8 and DISP_4.
1841         Split IMM_[48]{,BY[24]} into IMM[01]_[48]{,BY[24]}.  Add REPEAT.
1842         (sh_arg_type): Add A_PC.
1843         (sh_table): Update entries using immediates.  Add repeat.
1844         * sh-dis.c (print_insn_shx): Remove DISP_8 and DISP_4.
1845         Split IMM_[48]{,BY[24]} into IMM[01]_[48]{,BY[24]}.  Add REPEAT.
1846
1847 2000-04-04  Alan Modra  <alan@linuxcare.com.au>
1848
1849         * po/opcodes.pot: Regenerate.
1850
1851         * Makefile.am (MKDEP): Use gcc -MM rather than mkdep.
1852         (DEP): Quote when passing vars to sub-make.  Add warning message
1853         to end.
1854         (DEP1): Rewrite for "gcc -MM".
1855         (CLEANFILES): Add DEP2.
1856         Update dependencies.
1857         * Makefile.in: Regenerate.
1858
1859 2000-04-03  Denis Chertykov  <denisc@overta.ru>
1860
1861         * avr-dis.c: Syntax cleanup.
1862         (add0fff): Print the pc relative address as a signed number.
1863         (add03f8): Likewise.
1864
1865 2000-04-01  Ian Lance Taylor  <ian@zembu.com>
1866
1867         * disassemble.c (disassembler_usage): Don't use a prototype.  Mark
1868         the parameter ATTRIBUTE_UNUSED.
1869         * ppc-opc.c: Add ATTRIBUTE_UNUSED as needed.
1870
1871 2000-04-01  Alexandre Oliva  <aoliva@redhat.com>
1872
1873         * m10300-opc.c: SP-based offsets are always unsigned.
1874
1875 2000-03-29  Thomas de Lellis  <tdel@windriver.com>
1876
1877         * arm-opc.h (thumb_opcodes): Disassemble 0xde.. to "bal"
1878         [branch always] instead of "undefined".
1879
1880 2000-03-27  Nick Clifton  <nickc@redhat.com>
1881
1882         * d30v-opc.c (d30v_format_table): Move SHORT_AR to end of list of
1883         short instructions, from end of list of long instructions.
1884
1885 2000-03-27  Ian Lance Taylor  <ian@zembu.com>
1886
1887         * Makefile.am (CFILES): Add avr-dis.c.
1888         (ALL_MACHINES): Add avr-dis.lo.
1889
1890 2000-03-27  Alan Modra  <alan@linuxcare.com>
1891
1892         * avr-dis.c (add0fff, add03f8): Don't use structure bitfields to
1893         truncate integers.
1894         (print_insn_avr): Call function via pointer in K&R compatible way.
1895         (dispLDD, regPP, reg50, reg104, reg40, reg20w, lit404, lit204,
1896         add0fff, add03f8): Convert to old style function declaration and
1897         add prototype.
1898         (avrdis_opcode): Add prototype.
1899
1900 2000-03-27  Denis Chertykov  <denisc@overta.ru>
1901
1902         * avr-dis.c: New file.  AVR disassembler.
1903         * configure.in (bfd_avr_arch): New architecture support.
1904         * disassemble.c: Likewise.
1905         * configure: Regenerate.
1906
1907 2000-03-06  J"oern Rennecke <amylaar@redhat.com>
1908
1909         * sh-opc.h (sh_table): ldre and ldrs have a *signed* displacement.
1910
1911 2000-03-02  J"orn Rennecke <amylaar@redhat.co.uk>
1912
1913         * d30v-dis.c (print_insn): Remove d*i hacks.  Use per-operand
1914         flag to determine if operand is pc-relative.
1915         * d30v-opc.c:
1916         (d30v_format_table):
1917         (REL6S3): Renamed from IMM6S3.
1918         Added flag OPERAND_PCREL.
1919         (REL12S3, REL18S3, REL32): Split from IMM12S3, IMM18S3, REL32, with
1920         added flag OPERAND_PCREL.
1921         (IMM12S3U): Replaced with REL12S3.
1922         (SHORT_D2, LONG_D): Delay target is pc-relative.
1923         (SHORT_B2r, SHORT_B3r, SHORT_B3br, SHORT_D2r, LONG_Ur, LONG_2r):
1924         Split from SHORT_B2, SHORT_D2, SHORT_B3b, SHORT_D2, LONG_U, LONG_2r,
1925         using the REL* operands.
1926         (LONG_2br, LONG_Dr): Likewise, from LONG_2b, LONG_D.
1927         (SHORT_D1r, SHORT_D2Br, LONG_Dbr): Renamed from SHORT_D1, SHORT_D2B,
1928         LONG_Db, using REL* operands.
1929         (SHORT_U, SHORT_A5S): Removed stray alternatives.
1930         (d30v_opcode_table): Use new *r formats.
1931
1932 2000-02-28  Nick Clifton  <nickc@redhat.com>
1933
1934         * m32r-desc.c (m32r_cgen_cpu_open): Replace 'flags' with
1935         'signed_overflow_ok_p'.
1936
1937 2000-02-27  Eli Zaretskii  <eliz@is.elta.co.il>
1938
1939         * Makefile.am (stamp-lib): Use $(LIBTOOL) --config to get the
1940         name of the libtool directory.
1941         * Makefile.in: Rebuild.
1942
1943 2000-02-24  Nick Clifton  <nickc@redhat.com>
1944
1945         * cgen-opc.c (cgen_set_signed_overflow_ok): New function.
1946         (cgen_clear_signed_overflow_ok): New function.
1947         (cgen_signed_overflow_ok_p): New function.
1948
1949 2000-02-23  Andrew Haley  <aph@redhat.com>
1950
1951         * m32r-asm.c, m32r-desc.c, m32r-desc.h, m32r-dis.c,
1952         m32r-ibld.c, m32r-opc.h: Rebuild.
1953
1954 2000-02-23  Linas Vepstas <linas@linas.org>
1955
1956         * i370-dis.c, i370-opc.c: New.
1957
1958         * disassemble.c (ARCH_i370): Define.
1959         (disassembler): Handle it.
1960
1961         * Makefile.am: Add support for Linux/IBM 370.
1962         * configure.in: Likewise.
1963
1964         * Makefile.in: Regenerate.
1965         * configure: Likewise.
1966
1967 2000-02-22  Chandra Chavva   <cchavva@redhat.com>
1968
1969         * d30v-opc.c (d30v_opcode_tab) : Added FLAG_NOT_WITH_ADDSUBppp to
1970         ST2H, STB, STH, STHH, STW and ST2H opcodes to prohibit parallel
1971         procedure.
1972
1973 2000-02-22  Andrew Haley  <aph@redhat.com>
1974
1975         * mips-dis.c (_print_insn_mips): New arg for OPCODE_IS_MEMBER:
1976         force gp32 to zero.
1977         * mips-opc.c (G6): New define.
1978         (mips_builtin_op): Add "move" definition for -gp32.
1979
1980 2000-02-22  Ian Lance Taylor  <ian@zembu.com>
1981
1982         From Grant Erickson <gerickso@Brocade.COM>:
1983         * ppc-opc.c: Correct dcread--it takes 3 arguments, not 2.
1984
1985 2000-02-21  Alan Modra  <alan@spri.levels.unisa.edu.au>
1986
1987         * dis-buf.c (buffer_read_memory): Change `length' param and all int
1988         vars to unsigned.
1989
1990 2000-02-17 J"orn Rennecke <amylaar@redhat.co.uk>
1991
1992         * sh-dis.c (print_movxy, print_insn_ddt, print_dsp_reg): New functions.
1993         (print_insn_ppi): Likewise.
1994         (print_insn_shx): Use info->mach to select appropriate insn set.
1995         Add support for sh-dsp.  Remove FD_REG_N support.
1996         * sh-opc.h (sh_nibble_type): Add new values for sh-dsp support.
1997         (sh_arg_type): Likewise.  Remove FD_REG_N.
1998         (sh_dsp_reg_nums): New enum.
1999         (arch_sh1, arch_sh2, arch_sh3, arch_sh3e, arch_sh4): New macros.
2000         (arch_sh_dsp, arch_sh3_dsp, arch_sh1_up, arch_sh2_up): Likewise.
2001         (arch_sh3_up, arch_sh3e_up, arch_sh4_up, arch_sh_dsp_up): Likewise.
2002         (arch_sh3_dsp_up): Likewise.
2003         (sh_opcode_info): New field: arch.
2004         (sh_table): Split up insn with FD_REG_N into ones with F_REG_N and
2005         D_REG_N.  Fill in arch field.  Add sh-dsp insns.
2006
2007 2000-02-14  Fernando Nasser  <fnasser@totem.to.redhat.com>
2008
2009         * arm-dis.c: Change flavor name from atpcs-special to
2010         special-atpcs to prevent name conflict in gdb.
2011         (get_arm_regname_num_options, set_arm_regname_option,
2012         get_arm_regnames): New functions.  API to access the several
2013         flavor of register names.  Note: Used by gdb.
2014         (print_insn_thumb): Use the register name entry from the currently
2015         selected flavor for LR and PC.
2016
2017 2000-02-10  Nick Clifton  <nickc@redhat.com>
2018
2019         * mcore-opc.h (enum mcore_opclass): Add MULSH and OPSR
2020         classes.
2021         (mcore_table): Add "idly4", "psrclr", "psrset", "mulsh" and
2022         "mulsh.h" instructions.
2023         * mcore-dis.c (imsk array): Add masks for MULSH and OPSR
2024         classes.
2025         (print_insn_mcore): Add support for little endian targets.
2026         Add support for MULSH and OPSR classes.
2027
2028 2000-02-07  Nick Clifton  <nickc@redhat.com>
2029
2030         * arm-dis.c (parse_arm_diassembler_option): Rename again.
2031         Previous delat did not take.
2032
2033 2000-02-03  Timothy Wall  <twall@redhat.com>
2034
2035         * dis-buf.c (buffer_read_memory):  Use octets_per_byte field
2036         to adjust target address bounds checking and calculate the
2037         appropriate octet offset into data.
2038
2039 2000-01-27  Nick Clifton  <nickc@redhat.com>
2040
2041         * arm-dis.c: (parse_disassembler_option): Rename to
2042         parse_arm_disassembler_option and allow to be exported.
2043
2044         * disassemble.c (disassembler_usage): New function: Print out any
2045         target specific disassembler options.
2046         Call arm_disassembler_options() if the ARM architecture is being
2047         supported.
2048
2049         * arm-dis.c (NUM_ELEM): Define this macro if not already
2050         defined.
2051         (arm_regname): New struct type for ARM register names.
2052         (arm_toggle_regnames): Delete.
2053         (parse_disassembler_option): Use register name structure.
2054         (print_insn): New function: Combines duplicate code found in
2055         print_insn_big_arm and print_insn_little_arm.
2056         (print_insn_big_arm): Call print_insn.
2057         (print_insn_little_arm): Call print_insn.
2058         (print_arm_disassembler_options): Display list of supported,
2059         ARM specific disassembler options.
2060
2061 2000-01-27  Thomas de Lellis  <tdel@windriver.com>
2062
2063         * arm-dis.c (printf_insn_big_arm): Treat ELF symbols with the
2064         ARM_STT_16BIT flag as Thumb code symbols.
2065
2066         * arm-dis.c (printf_insn_little_arm): Ditto.
2067
2068 2000-01-25  Thomas de Lellis  <tdel@windriver.com>
2069
2070         * arm-dis.c (printf_insn_thumb): Prevent double dumping
2071         of raw thumb instructions.
2072
2073 2000-01-20  Nick Clifton  <nickc@redhat.com>
2074
2075         * mcore-opc.h (mcore_table): Add "add" as an alias for "addu".
2076
2077 2000-01-03  Nick Clifton  <nickc@cygnus.com>
2078
2079         * arm-dis.c (streq): New macro.
2080         (strneq): New macro.
2081         (force_thumb): ew local variable.
2082         (parse_disassembler_option): New function: Parse a single, ARM
2083         specific disassembler command line switch.
2084         (parse_disassembler_option): Call parse_disassembler_option to
2085         parse individual command line switches.
2086         (print_insn_big_arm): Check force_thumb.
2087         (print_insn_little_arm): Check force_thumb.
2088
2089 For older changes see ChangeLog-9899
2090 \f
2091 Local Variables:
2092 mode: change-log
2093 left-margin: 8
2094 fill-column: 74
2095 version-control: never
2096 End: