opcodes/ChangeLog

   1 Wed Apr  6 17:11:45 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
   2
   3         * mips-opc.c (mips_opcodes): Correct operands of "nor" with an
   4         immediate argument.
   5
   6 Mon Apr  4 16:30:46 1994  Doug Evans  (dje@canuck.cygnus.com)
   7
   8         * sparc-opc.c (sparc_opcodes): Fix "rd %fprs,%l0".
   9
  10 Mon Apr  4 13:22:00 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
  11
  12         * ppc-opc.c (powerpc_operands): The signedp field has been
  13         removed, so don't initialize it.  Set the PPC_OPERAND_SIGNED flag
  14         instead.  Add new operand SISIGNOPT.
  15         (powerpc_opcodes): For lis, liu, addis, and cau use SISIGNOPT.
  16         Based on patch from David Edelsohn (edelsohn@npac.syr.edu).
  17         * ppc-dis.c (print_insn_powerpc): Check PPC_OPERAND_SIGNED rather
  18         than signedp field.
  19
  20 Wed Mar 30 00:31:49 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
  21
  22         * i386-dis.c (struct private):  Renamed to dis_private. `private'
  23         is a reserved word for dynix cc.
  24
  25 Mon Mar 28 13:00:15 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
  26
  27         * configure.in: Change error message to refer to bfd/config.bfd
  28         rather than bfd/configure.in.
  29
  30 Mon Mar 28 12:28:30 1994  David Edelsohn  (edelsohn@npac.syr.edu)
  31
  32         * ppc-opc.c: Define POWER2 as short alias flag.
  33         (powerpc_opcodes): Add POWER/2 opcodes lfq*, stfq*, fcir[z], and
  34         fsqrt.
  35
  36 Wed Mar 23 12:23:05 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
  37
  38         * i960-dis.c (print_insn_i960): Don't read a second word for
  39         opcodes 0, 1, 2 and 3.
  40
  41 Wed Mar 16 15:37:58 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
  42
  43         * configure.in: Don't build m68881-ext.o for bfd_m68k_arch.
  44
  45 Mon Mar 14 14:53:50 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
  46
  47         * m68881-ext.c: Removed; no longer used.
  48         * Makefile.in: Changed accordingly.
  49
  50         * m68k-dis.c (ext_format_68881): Don't declare.
  51         (print_insn_m68k): If an instruction uses place 'i', it uses at
  52         least four fixed bytes.
  53         (print_insn_arg): Don't bump p by 2 for case 'I', place 'i'.  For
  54         extended float, convert to double using floatformat_to_double, not
  55         ieee_extended_to_double, and fetch the data before converting it.
  56
  57 Tue Mar  8 18:12:25 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
  58
  59         * mips-opc.c: It's sqrt.s, not sqrt.w.  From
  60         davidj@ICSI.Berkeley.EDU (David Johnson).
  61
  62 Tue Feb  8 16:55:27 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
  63
  64         * ppc-opc.c (powerpc_opcodes): The POWER uses bdn[l][a] where the
  65         PowerPC uses bdnz[l][a].
  66
  67 Tue Feb  8 00:32:28 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
  68
  69         * dis-buf.c, i386-dis.c:  Include sysdep.h.
  70
  71 Mon Feb  7 19:22:23 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
  72
  73         * configure.in (bfd_powerpc_arch): Use ppc-dis.o and ppc-opc.o.
  74
  75         * ppc-opc.c (powerpc_opcodes): Mark POWER instructions supported
  76         by Motorola PowerPC 601 with PPC_OPCODE_601.
  77         * ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc):
  78         Disassemble Motorola PowerPC 601 instructions as well as normal
  79         PowerPC instructions.
  80
  81 Sun Feb  6 07:45:17 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
  82
  83         * i960-dis.c (reg, mem): Just use a static array instead of
  84         calling xmalloc.
  85
  86 Sat Feb  5 00:04:02 1994  Jeffrey A. Law  (law@snake.cs.utah.edu)
  87
  88         * hppa-dis.c (print_insn_hppa): For '?' and '@' only adjust the
  89         condition name index if this is for a negated condition.
  90
  91         * hppa-dis.c (print_insn_hppa): No space before 'H' operand.
  92         Floating point format for 'H' operand is backwards from normal
  93         case (0 == double, 1 == single).  For '4', '6', '7', '9', and '8'
  94         operands (fmpyadd and fmpysub), handle bizarre register
  95         translation correctly for single precision format.
  96
  97         * hppa-dis.c (print_insn_hppa): Do not emit a space after 'F'
  98         or 'I' operands if the next format specifier is 'M' (fcmp
  99         condition completer).
 100
 101 Feb  4 23:38:03 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
 102
 103         * ppc-opc.c (powerpc_operands): New operand type MBE to handle a
 104         single number giving a bitmask for the MB and ME fields of an M
 105         form instruction.  Change NB to accept 32, and turn it into 0;
 106         also turn 0 into 32 when disassembling.  Seperated SH from NB.
 107         (insert_mbe, extract_mbe): New functions.
 108         (insert_nb, extract_nb): New functions.
 109         (SC_MASK): Mask out SA and LK bits.
 110         (powerpc_opcodes): Change "cal" to use RT, D, RA rather than RT,
 111         RA, SI.  Change "liu" and "cau" to use UI rather than SI.  Mark
 112         "bctr" and "bctrl" as accepted by POWER.  Change "rlwimi",
 113         "rlimi", "rlwimi.", "rlimi.", "rlwinm", "rlinm", "rlwinm.",
 114         "rlinm.", "rlmi", "rlmi.", "rlwnm", "rlnm", "rlwnm.", "rlnm." to
 115         use MBE rather than MB.  Add "mfmq" and "mtmq" POWER instructions.
 116         (powerpc_macros): Define table of macro definitions.
 117         (powerpc_num_macros): Define.
 118
 119         * ppc-dis.c (print_insn_powerpc): Don't skip optional operands
 120         if PPC_OPERAND_NEXT is set.
 121
 122 Sat Jan 22 23:10:07 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
 123
 124         * i960-dis.c (print_insn_i960): Make buffer bfd_byte instead of
 125         char.  Retrieve contents using bfd_getl32 instead of shifting.
 126
 127 Fri Jan 21 19:01:39 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
 128
 129         * ppc-opc.c: New file.  Opcode table for PowerPC, including
 130         opcodes for POWER (RS/6000).
 131         * ppc-dis.c: New file.  PowerPC and Power (RS/6000) disassembler.
 132         * Makefile.in (ALL_MACHINES): Add ppc-dis.o and ppc-opc.o.
 133         (CFILES): Add ppc-dis.c.
 134         (ppc-dis.o, ppc-opc.o): New targets.
 135         * configure.in: Build ppc-dis.o and ppc-opc.o for bfd_rs6000_arch.
 136
 137 Mon Jan 17 20:05:49 1994  Jeffrey A. Law  (law@snake.cs.utah.edu)
 138
 139         * hppa-dis.c (print_insn_hppa): Handle 'N' in assembler template.
 140         No space before 'u', 'f', or 'N'.
 141
 142 Sun Jan 16 14:20:16 1994  Jim Kingdon  (kingdon@deneb.cygnus.com)
 143
 144         * i386-dis.c (print_insn_i386): Add FIXME comment regarding reading
 145         farther than we should.
 146
 147         * i386-dis.c (dis386): Use Yb and Yv for scasb and scasS.
 148
 149 Thu Jan  6 12:38:05 1994  David J. Mackenzie  (djm@thepub.cygnus.com)
 150
 151         * sparc-dis.c m68k-dis.c alpha-dis.c a29k-dis.c: Fix comments.
 152
 153 Wed Jan  5 11:56:21 1994  David J. Mackenzie  (djm@thepub.cygnus.com)
 154
 155         * i960-dis.c (print_insn_i960): Only read word2 if the instruction
 156         needs it, to prevent reading past the end of a section.
 157
 158 Wed Nov 17 17:20:12 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
 159
 160         * mips-opc.h: Use macro for j instruction, to support SVR4 PIC.
 161         Removed t,A case for la; always use t,A(b) case.
 162
 163 Mon Nov  8 12:37:36 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
 164
 165         From Ted Lemen <mellon@pepper.ncd.com>
 166         * mips-dis.c (print_insn_arg): Handle 'k'.
 167         * mips-opc.c: Make cache use k, not t.
 168
 169 Sun Nov  7 23:52:34 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
 170
 171         * alpha-opc.h, alpha-dis.c (print_insn_alpha):  Add
 172         FLOAT_MEMORY_FORMAT_CODE, FLOAT_BRANCH_FORMAT_CODE, correct
 173         FLOAT_FORMAT_CODE to put out floating point register names.
 174
 175 Mon Nov  1 18:17:51 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
 176
 177         * mips-opc.c: Use macros for jal variants, to support SVR4 PIC.
 178
 179 Thu Oct 28 17:42:23 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
 180
 181         * a29k-dis.c (print_insn): Use 0x%08x, not 0x%8x.
 182
 183 Wed Oct 27 11:48:01 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
 184
 185         * mips-opc.c (dsll, dsra, dsrl): Added '>' cases for shift counts
 186         larger than 32.  Moved dsxx32 variants first for disassembler.
 187
 188 Mon Oct 25 11:33:14 1993  Steve Chamberlain  (sac@phydeaux.cygnus.com)
 189
 190         * z8kgen.c, z8k-opc.h: Add full lda information.
 191
 192 Tue Oct 19 12:39:25 1993  Jeffrey A Law  (law@cs.utah.edu)
 193
 194         * hppa-dis.c (print_insn_hppa): Do not emit a space after
 195         movb instructions.  Any necessary space will be emitted by
 196         the code to handle nullification completers.
 197
 198 Wed Oct 13 16:19:07 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
 199
 200         * mips-opc.c: Moved l.d down so that it disassembles as ldc1.
 201
 202 Fri Oct  8 02:34:21 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
 203
 204         * alpha-opc.h:  Add ldl_l, fix typo for ldq_u.
 205         * alpha-dis.c (print_insn_alpha):  Add code for PAL_FORMAT_CODE.
 206
 207 Tue Oct  5 17:47:53 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
 208
 209         * mips-opc.c: Correct lwu opcode value (book had it wrong).
 210
 211 Thu Sep 30 11:26:18 1993  Steve Chamberlain  (sac@phydeaux.cygnus.com)
 212
 213         * z8k-dis.c (FETCH_DATA): get just the right amount of data.
 214         (unpack_instr): Cope with ARG_IMM4M1 type instructions.
 215
 216 Wed Sep 29 16:24:49 1993  K. Richard Pixley  (rich@sendai.cygnus.com)
 217
 218         * m88k-dis.c (m88kdis): comment change.  Remove space after
 219           printing mnemonic.
 220           (printop): handle new arg types DEC and XREG for m88110.
 221
 222 Tue Sep 28 19:20:16 1993  Jeffrey A Law (law@snake.cs.utah.edu)
 223
 224         * hppa-dis.c (print_insn_hppa): Handle 'z' operand
 225         type for absolute branch addresses.  Delete special
 226         "ble" and "be" code in 'W' operand code.
 227
 228 Fri Sep 24 14:08:33 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
 229
 230         * mips-opc.c: Set hazard information correctly for branch
 231         likely instructions.
 232
 233 Fri Sep 17 04:41:17 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
 234
 235         * alpha-dis.c (print_insn_alpha), alpha-opc.h:  Fix bugs, use
 236         info->fprintf_func for printing and info->print_address_func for
 237         address output.
 238
 239 Wed Sep 15 12:12:07 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
 240
 241         * mips-opc.c: Set INSN_TRAP for tXX instructions.
 242
 243 Thu Sep  9 10:11:27 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
 244
 245         * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson):
 246         Corrected second case of "b" for disassembler.
 247
 248 Tue Sep  7 14:25:15 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
 249
 250         * mips-dis.c, m88k-dis.c: Don't include libbfd.h.  Changed calls
 251         to BFD swapping routines to correspond to BFD name changes.
 252
 253 Thu Sep  2 10:35:25 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
 254
 255         * mips-opc.c: Change div machine instruction to be z,s,t rather
 256         than s,t.  Change div macro to be d,v,t rather than d,s,t.
 257         Likewise for divu, ddiv, ddivu.  Added z,s,t case for drem, dremu,
 258         rem and remu which generates only the corresponding div
 259         instruction.  This is for compatibility with the MIPS assembler,
 260         which only generates the simple machine instruction when an
 261         explicit destination of $0 is used.
 262         * mips-dis.c (print_insn_arg): Handle 'z' (always register zero).
 263
 264 Thu Aug 26 17:41:44 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
 265
 266         * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Set
 267         WR_31 hazard for bal, bgezal, bltzal.
 268
 269 Thu Aug 26 17:20:02 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
 270
 271         * hppa-dis.c (print_insn_hppa): Use print function
 272         from within the disassemble_info, not fprintf_filtered.
 273
 274 Wed Aug 25 13:51:40 1993  Ken Raeburn  (raeburn@cambridge.cygnus.com)
 275
 276         * hppa-dis.c (print_insn_hppa): Handle '|' like '>'.  (From Jeff
 277         Law, law@cs.utah.edu.)
 278
 279 Mon Aug 23 12:44:05 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
 280
 281         * mips-opc.c ("absu"): Removed.
 282         ("dabs"): Added.
 283
 284 Fri Aug 20 10:52:52 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
 285
 286         * mips-opc.c: Added r6000 and r4000 instructions and macros.
 287         Changed hazard information to distinguish between memory load
 288         delays and coprocessor load delays.
 289
 290 Wed Aug 18 15:39:23 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
 291
 292         * mips-opc.c: li.d uses "T,L", not "S,F".  Added li.s.
 293
 294 Tue Aug 17 09:44:42 1993  David J. Mackenzie  (djm@thepub.cygnus.com)
 295
 296         * configure.in: Don't pass cpu to config.bfd.
 297
 298 Tue Aug 17 12:23:52 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
 299
 300         * m88k-dis.c (m88kdis): Make class unsigned.
 301
 302 Thu Aug 12 15:08:18 1993  Ian Lance Taylor  (ian@cygnus.com)
 303
 304         * alpha-dis.c (print_insn_alpha): One branch format case was
 305         missing the instruction name.
 306
 307 Wed Aug 11 19:29:39 1993  David J. Mackenzie  (djm@thepub.cygnus.com)
 308
 309         * Makefile.in (ALL_MACHINES): Renamed from DIS_LIBS.
 310         Add the arch-specific auxiliary files.
 311         (OFILES): Remove the arch-specific auxiliary files
 312         and use BFD_MACHINES instead of DIS_LIBS.
 313         * configure.in: Set BFD_MACHINES based on --with-targets option.
 314
 315 Thu Aug 12 12:04:53 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
 316
 317         * mips-opc.c: Added lwc1 E,A(b) to go with lwc1 T,A(b).  Similarly
 318         for swc1.
 319
 320 Sun Aug  8 15:09:30 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
 321
 322         * sparc-opc.c: Change CONST to const to deal with gcc
 323         -Dconst=__const -traditional.
 324
 325 Fri Aug  6 10:58:55 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
 326
 327         * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Took
 328         coprocessor instructions out of #if 0, and made them use new
 329         argument type "C".
 330
 331 Thu Aug  5 17:11:06 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
 332
 333         * sparc-dis.c: Include ansidecl.h before opcodes/sparc.h.
 334
 335 Fri Jul 30 18:48:15 1993  John Gilmore  (gnu@cygnus.com)
 336
 337         * sparc-opc.c:  Add F_JSR, F_UNBR, or F_CONDBR flags to each branch
 338         instruction, for use by the disassembler.
 339
 340         * sparc-dis.c (SEX):  Add sign extension macro.  Replace many
 341         hand-coded sign extensions that depended on 32-bit host ints.
 342         FIXME, we still depend on big-endian host bitfield ordering.
 343         (sparc_print_insn):  Set the insn_info_valid field, and the
 344         other fields that describe the instruction being printed.
 345
 346 Tue Jul 27 17:04:58 1993  Jim Wilson  (wilson@sphagnum.cygnus.com)
 347
 348         * sparc-opc.c (call): Accept all 6 addressing modes valid for
 349         `jmp' instead of just one of them.
 350
 351 Wed Jul 21 11:43:32 1993  Jim Kingdon  (kingdon@deneb.cygnus.com)
 352
 353         * hppa-dis.c: Move floating registers from reg_names to fp_reg_names.
 354         (fput_fp_reg_r): Renamed from fput_reg_r.
 355         (fput_fp_reg): New function.
 356         (print_insn_hppa): Use fput_fp_reg{,_r} where appropriate.
 357
 358         * hppa-dis.c (print_insn_hppa, cases 'a', 'd'): Print space afterwards.
 359
 360         * hppa-dis.c (print_insn_hppa, case 'd'): Use GET_COND not GET_FIELD.
 361
 362 Mon Jul 19 13:52:21 1993  Jim Kingdon  (kingdon@deneb.cygnus.com)
 363
 364         * hppa-dis.c (print_insn_hppa): Use extract_5r_store for 'r'.
 365
 366         * hppa-dis.c (print_insn_hppa, case '>'): If next character is 'n',
 367         don't output a space.
 368
 369         * hppa-dis.c (float_format_names): 10 is undefined, and 11 is quad.
 370
 371 Sun Jul 18 16:30:02 1993  Jim Kingdon  (kingdon@rtl.cygnus.com)
 372
 373         * mips-opc.c: New file, containing opcode table from
 374         ../include/opcode/mips.h.
 375         * Makefile.in: Add it.
 376
 377 Thu Jul 15 12:37:05 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
 378
 379         * m88k-dis.c: New file, moved in from gdb and changed to use the
 380         new dis-asm.h disassembler interface.
 381         * Makefile.in (DIS_LIBS): Added m88k-dis.o.
 382         (m88k-dis.o): New target.
 383
 384 Tue Jul 13 10:04:16 1993  Ian Lance Taylor  (ian@cygnus.com)
 385
 386         * mips-dis.c (print_insn_arg, _print_insn_mips): Made pointer to
 387         argument string const char * to correspond to opcode/mips.h.
 388
 389 Tue Jul  6 15:18:37 1993  Ian Lance Taylor  (ian@cygnus.com)
 390
 391         * mips-dis.c: Updated to account for name changes in new version
 392         of opcode/mips.h.
 393         * Makefile.in: Added header file dependencies.
 394
 395 Sat Jul  3 23:47:56 1993  Doug Evans  (dje@canuck.cygnus.com)
 396
 397         * h8300-dis.c (bfd_h8_disassemble): Correct fetching of instruction.
 398
 399 Thu Jul  1 12:23:38 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
 400
 401         * m68k-dis.c (NEXTWORD, NEXTLONG): Use ((x) ^ 0x8000) - 0x8000 to sign
 402         extend, rather than shifts.
 403
 404 Sun Jun 20 20:56:56 1993  Ken Raeburn  (raeburn@poseidon.cygnus.com)
 405
 406         * Makefile.in: Undo 15 June change.
 407
 408 Fri Jun 18 14:15:15 1993  Per Bothner  (bothner@deneb.cygnus.com)
 409
 410         * m68k-dis.c (print_insn_arg):  Change return value to byte count
 411         or error code.
 412         * m68k-dis.c:  Re-write to detect invalid operands before
 413         printing anything, so we can handle this the same way we
 414         handle invalid opcodes.
 415
 416 Thu Jun 17 15:01:36 1993  Steve Chamberlain  (sac@phydeaux.cygnus.com)
 417
 418         * sh-dis.c, sh-opc.h: Understand some more opcodes.
 419
 420 Wed Jun 16 13:48:05 1993  Ian Lance Taylor  (ian@cygnus.com)
 421
 422         * hppa-dis.c: Include <ansidecl.h> and sysdep.h before other
 423         header files.
 424
 425 Tue Jun 15 21:45:26 1993  Ken Raeburn  (raeburn@cambridge.cygnus.com)
 426
 427         * sparc-dis.c: Don't declare qsort, since sysdep.h might.
 428
 429         * configure.in: Do make sysdep.h link.
 430         * Makefile.in: Search ../include.  Don't search ../bfd.
 431
 432 Tue Jun 15 13:36:10 1993  Stu Grossman  (grossman@cygnus.com)
 433
 434         Changes from Jeff Law, law@cs.utah.edu:
 435         * hppa-dis.c: Fix typo.  'a' and 'd' were reversed.
 436         Do not print a space before the completers specified by
 437         'a' and 'd'.
 438
 439 Fri Jun 11 18:40:21 1993  Ken Raeburn  (raeburn@cygnus.com)
 440
 441         * mips-dis.c: No longer need to bomb out if HOST_64_BIT is
 442         defined, since gdb has been fixed.
 443
 444         Changes from Jeff Law, law@cs.utah.edu:
 445         * hppa-dis.c (print_insn_hppa): Last argument to fput_reg,
 446         fput_reg_r, fput_creg, fput_const, and fputs_filtered should
 447         be a *disassemble_info, not a *FILE.
 448         * hppa-dis.c: Support 'd', '!', and 'a'.
 449         * hppa-dis.c: Support 's' to extract a 2 bit space register.
 450         * hppa-dis.c: Delete cases which are no longer needed.
 451
 452 Fri Jun 11 07:53:48 1993  Jim Kingdon  (kingdon@cygnus.com)
 453
 454         * m68k-dis.c (print_insn_{m68k,arg}): Add MMU codes.
 455
 456 Tue Jun  8 12:25:01 1993  Steve Chamberlain  (sac@phydeaux.cygnus.com)
 457
 458         * h8300-dis.c: New file, removed from bfd/cpu-h8300.c, with
 459         H8/300-H opcodes.
 460
 461 Mon Jun  7 12:58:49 1993  Per Bothner  (bothner@rtl.cygnus.com)
 462
 463         * Makefile.in (CSEARCH): Add -I../bfd for sysdep.h and bfd.h.
 464         * configure.in:  No longer need to configure to get sysdep.h.
 465
 466 Thu Jun  3 15:56:49 1993  Stu Grossman  (grossman@cygnus.com)
 467
 468         * Patches from Jeffrey Law <law@cs.utah.edu>.
 469         * hppa-dis.c: Support 'I', 'J', and 'K' in output
 470         templates for 1.1 FP computational instructions.
 471
 472 Tue May 25 13:05:48 1993  Ken Raeburn  (raeburn@cambridge.cygnus.com)
 473
 474         * h8500-dis.c (print_insn_h8500): Address argument is type
 475         bfd_vma.
 476         * z8k-dis.c (print_insn_z8k, print_insn_z8001, print_insn_z8002):
 477         Ditto.
 478
 479         * h8500-opc.h (addr_class_type): No comma at end of enumerator.
 480         * sh-opc.h (sh_nibble_type, sh_arg_type): Ditto.
 481
 482         * sparc-dis.c (compare_opcodes): Move static declaration to
 483         top-level.
 484
 485 Fri May 21 14:17:37 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
 486
 487         * sparc-dis.c (print_insn_sparc): Implement 'n' argument for unimp
 488         instruction, remove unimp hack from 'l' argument.
 489
 490 Wed May 19 15:35:54 1993  Stu Grossman  (grossman@cygnus.com)
 491
 492         * z8k-dis.c (fetch_data):  Use unsigned char to make ancient gcc's
 493         happy.
 494
 495 Fri May 14 15:22:46 1993  Ian Lance Taylor  (ian@cygnus.com)
 496
 497         * Based on patches from davidj@ICSI.Berkeley.EDU (David Johnson):
 498         * mips-dis.c (print_insn_arg): Handle 'C' for general coprocessor
 499         instructions.
 500
 501 Fri May 14 00:09:14 1993  Ken Raeburn  (raeburn@cambridge.cygnus.com)
 502
 503         * hppa-dis.c: Include dis-asm.h before sysdep.h.  Changed some
 504         arrays of string pointers to 2-d arrays of chars, to save
 505         space.
 506
 507 Thu May  6 20:51:17 1993  Fred Fish  (fnf@cygnus.com)
 508
 509         * a29k-dis.c, alpha-dis.c, i960-dis.c, sparc-dis.c, z8k-dis.c:
 510         Cast second arg to read_memory_func to "bfd_byte *", as necessary.
 511
 512 Tue May  4 20:31:10 1993  Ken Raeburn  (raeburn@cambridge.cygnus.com)
 513
 514         * hppa-dis.c: New file from Utah, adapted to new disassembler
 515         calling interface.
 516         * Makefile.in: Include it.
 517
 518 Mon Apr 26 18:17:42 1993  Steve Chamberlain  (sac@thepub.cygnus.com)
 519
 520         * sh-dis.c, sh-opc.h: New files.
 521
 522 Fri Apr 23 18:51:22 1993  Steve Chamberlain  (sac@thepub.cygnus.com)
 523
 524         * alpha-dis.c, alpha-opc.h: New files.
 525
 526 Tue Apr  6 12:54:08 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
 527
 528         * mips-dis.c: Sign extend 'j' and 'b' arguments, delta is a signed
 529         value.
 530
 531 Mon Apr  5 17:37:37 1993  John Gilmore  (gnu@cygnus.com)
 532
 533         * sparc-dis.c: Make "ta" the default trap instruction, "t" the alias.
 534
 535 Fri Apr  2 07:24:27 1993  Ian Lance Taylor  (ian@cygnus.com)
 536
 537         * a29k-dis.c, sparc-dis.c, sparc-opc.c: Use CONST rather than
 538         const.
 539
 540 Thu Apr  1 11:20:43 1993  Jim Kingdon  (kingdon@cygnus.com)
 541
 542         * sparc-dis.c: Use fprintf_func a few places where I forgot,
 543         and double percent signs a few places.
 544
 545         * a29k-dis.c, i960-dis.c: New, merged from gdb and binutils.
 546
 547         * i386-dis.c, m68k-dis.c, mips-dis.c, sparc-dis.c:
 548         Use info->print_address_func not print_address.
 549
 550         * dis-buf.c (generic_print_address): New function.
 551
 552 Wed Mar 31 10:07:04 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
 553
 554         * Makefile.in: Add sparc-dis.c.
 555         sparc-dis.c: New file, merges binutils and gdb versions as follows:
 556         From GDB:
 557             Add `add' instruction to the set that get checked
 558             for a preceding `sethi' in order to print an absolute address.
 559             * (print_insn):  Disassembly prefers real instructions.
 560             (is_delayed_branch):  Speed up.
 561             * sparc-opcode.h: Add ALIAS bit to aliases.  Fix up opcode tables.
 562             Still missing some float ops, and needs testing.
 563             * sparc-pinsn.c (print_insn): Eliminate 'set' test, subsumed by
 564             F_ALIAS.  Use printf, not fprintf, when not passing a file
 565             pointer...
 566             (compare_opcodes): Check that identical instructions have
 567             identical opcodes, complain otherwise.
 568         From binutils:
 569             * New 'm' arg.
 570             * Include reg_names.
 571         From neither:
 572             Use dis-asm.h/read_memory_func interface.
 573
 574 Wed Mar 31 20:49:06 1993  K. Richard Pixley  (rich@rtl.cygnus.com)
 575
 576         * h8500-dis.c, i386-dis.c, m68k-dis.c, z8k-dis.c (fetch_data):
 577           deliberately return non-zero to setjmp from longjmp.  Otherwise
 578           this code fails to compile.
 579
 580 Wed Mar 31 17:04:31 1993  Stu Grossman  (grossman@cygnus.com)
 581
 582         * m68k-dis.c:  Fix prototype for fetch_arg().
 583
 584 Wed Mar 31 10:07:04 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
 585
 586         * dis-buf.c: New file, for new read_memory_func interface.
 587         Makefile.in (OFILES): Include it.
 588         m68k-dis.c, i386-dis.c, h8500-dis.c, mips-dis.c, z8k-dis.c:
 589         Use new read_memory_func interface.
 590
 591 Mon Mar 29 14:02:17 1993  Steve Chamberlain  (sac@thepub.cygnus.com)
 592
 593         * h8500-dis.c (print_insn_h8500): Get sign of fp offsets right.
 594         * h8500-opc.h: Fix couple of opcodes.
 595
 596 Wed Mar 24 02:03:36 1993  david d `zoo' zuhn  (zoo at poseidon.cygnus.com)
 597
 598         * Makefile.in: add dvi & installcheck targets
 599
 600 Mon Mar 22 18:55:04 1993  John Gilmore  (gnu@cygnus.com)
 601
 602         * Makefile.in:  Update for h8500-dis.c.
 603
 604 Fri Mar 19 14:27:17 1993  Steve Chamberlain  (sac@thepub.cygnus.com)
 605
 606         * h8500-dis.c, h8500-opc.h: New files
 607
 608 Thu Mar 18 14:12:37 1993  Per Bothner  (bothner@rtl.cygnus.com)
 609
 610         * mips-dis.c, z8k-dis.c:  Converted to use interface defined in
 611         ../include/dis-asm.h.
 612         * m68k-dis.c:  New file (merge of ../binutils/m68k-pinsn.c
 613         and ../gdb/m68k-pinsn.c).
 614         * i386-dis.c:  New file (merge of ../binutils/i386-pinsn.c
 615         and ../gdb/i386-pinsn.c).
 616         * m68881-ext.c:  New file.  Moved definition of
 617         ext_format ext_format_68881 from ../gdb/m68k-tdep.c.
 618         * Makefile.in:  Adjust for new files.
 619         * i386-dis.c:  Patches from John Hassey (hassey@dg-rtp.dg.com).
 620         * m68k-dis.c:  Recognize '9' placement code, so (say) pflush
 621         can be dis-assembled.
 622
 623 Wed Feb 17 09:19:47 1993  Ken Raeburn  (raeburn@cambridge.cygnus.com)
 624
 625         * mips-dis.c (print_insn_arg): Now returns void.
 626
 627 Mon Jan 11 16:09:16 1993  Fred Fish  (fnf@cygnus.com)
 628
 629         * mips-dis.c (ansidecl.h):  Include for benefit of sysdep.h
 630         files that use the macros.
 631
 632 Thu Jan  7 13:15:17 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
 633
 634         * mips-dis.c: New file, from gdb/mips-pinsn.c.
 635         * Makefile.in (DIS_LIBS): Added mips-dis.o.
 636         (CFILES): Added mips-dis.c.
 637
 638 Thu Jan  7 07:36:33 1993  Steve Chamberlain  (sac@thepub.cygnus.com)
 639
 640         * z8k-dis.c (print_insn_z8001, print_insn_z8002): new routines
 641         * z8kgen.c, z8k-opc.h: fix sizes of some shifts.
 642
 643 Tue Dec 22 15:42:44 1992  Per Bothner  (bothner@rtl.cygnus.com)
 644
 645         * Makefile.in:  Improve *clean rules.
 646         * configure.in:  Allow a default host.
 647
 648 Tue Nov 17 19:53:54 1992  david d `zoo' zuhn  (zoo at cirdan.cygnus.com)
 649
 650         * Makefile.in: also use -I$(srcdir)/../bfd, since some sysdep
 651         files include other sysdep files
 652
 653 Thu Nov 12 16:10:37 1992  Steve Chamberlain  (sac@thepub.cygnus.com)
 654
 655         * z8k-dis.c z8k-opc.h z8kgen.c: checkpoint
 656
 657 Fri Oct  9 04:56:05 1992  John Gilmore  (gnu@cygnus.com)
 658
 659         * configure.in:  For host support, use ../bfd/configure.host
 660         so it stays in sync with the ../bfd/hosts database.
 661
 662 Thu Oct  1 23:38:54 1992  david d `zoo' zuhn  (zoo at cirdan.cygnus.com)
 663
 664         * configure.in: use cpu-vendor-os triple instead of nested cases
 665
 666 Wed Sep 30 16:09:20 1992  Michael Werner  (mtw@cygnus.com)
 667
 668         * z8k-dis.c (unparse_instr): fix bug where opcode returned was
 669         *always* the wrong one.
 670
 671 Wed Sep 30 07:42:17 1992  Steve Chamberlain  (sac@thepub.cygnus.com)
 672
 673         * z8kgen.c: added copyright info
 674
 675 Tue Sep 29 12:20:21 1992  Steve Chamberlain  (sac@thepub.cygnus.com)
 676
 677         * z8k-dis.c (unparse_instr): prettier tabs
 678         * z8kgen.c -> z8k-opc.h: bug fixes in tables
 679
 680 Fri Sep 25 12:50:32 1992  Stu Grossman  (grossman at cygnus.com)
 681
 682         * configure.in:  Add ncr* configuration.
 683         * z8k-dis.c (struct instr_data_s):  Make instr_asmsrc char to make
 684         picayune ANSI compilers happy.
 685
 686 Sep 20 08:50:55 1992  Fred Fish  (fnf@cygnus.com)
 687
 688         * configure.in (i386):  Make i386 and i486 synonymous for now.
 689         * configure.in (i[34]86-*-sysv4):  Add my_host definition.
 690
 691 Fri Sep 18 17:01:23 1992  Ken Raeburn  (raeburn@cambridge.cygnus.com)
 692
 693         * Makefile.in (install): Fix typo.
 694
 695 Fri Sep 18 02:04:24 1992  John Gilmore  (gnu@cygnus.com)
 696
 697         * Makefile.in (make):  Remove obsolete crud.
 698         (sparc-opc.o):  Avoid Sun Make VPATH bug.
 699
 700 Tue Sep  8 17:29:27 1992  K. Richard Pixley  (rich@sendai.cygnus.com)
 701
 702         * Makefile.in: since there are no SUBDIRS, remove rule and
 703         references of subdir_do.
 704
 705 Tue Sep  8 17:02:58 1992  Ken Raeburn  (raeburn@cambridge.cygnus.com)
 706
 707         * Makefile.in (install): Get the library name right here too.
 708         Don't install bfd.h, since it's unrelated to this library.  No
 709         subdirs to recurse into, either.
 710         (CFILES): The source file has a .c suffix, not .o.
 711
 712         * sparc-opc.c: New file, moved from BFD.
 713         * Makefile.in (OFILES): Build it.
 714
 715 Thu Sep  3 16:59:20 1992  Michael Werner  (mtw@cygnus.com)
 716
 717         * z8k-dis.c: fixed forward refferences of some declarations.
 718
 719 Mon Aug 31 16:09:45 1992  Michael Werner  (mtw@cygnus.com)
 720
 721         * Makefile.in: get the name of the library right
 722
 723 Mon Aug 31 13:47:35 1992  Steve Chamberlain  (sac@thepub.cygnus.com)
 724
 725         * z8k-dis.c: knows how to disassemble z8k stuff
 726         * z8k-opc.h: new file full of z8000 opcodes
 727
 728 \f
 729 Local Variables:
 730 version-control: never
 731 End: