1 Tue Apr 1 16:27:45 1997 Klaus Kaempf <kkaempf@progis.de>
3 * makefile.vms: Update CFLAGS, add clean target.
5 Fri Mar 28 12:10:09 1997 Ian Lance Taylor <ian@cygnus.com>
7 * mips-opc.c: Add "wait". From Ralf Baechle
10 * configure.in: Add stdlib.h to AC_CHECK_HEADERS list.
11 * configure, config.in: Rebuild.
12 * sysdep.h: Include <stdlib.h> if it exists.
13 * sparc-dis.c: Include <stdio.h> and "sysdep.h". Don't include
15 * Makefile.in: Rebuild dependencies.
17 Thu Mar 27 14:24:43 1997 Ian Lance Taylor <ian@cygnus.com>
19 * ppc-opc.c: Add PPC 403 instructions and extended opcodes. From
20 Andrew Bray <andy@madhouse.demon.co.uk>.
22 * mips-opc.c: Add cast when setting mips_opcodes.
25 Tue Mar 25 23:04:00 1997 Stu Grossman (grossman@critters.cygnus.com)
27 * v850-dis.c (disassemble): Fix sign extension problem.
28 * v850-opc.c (extract_d*): Fix sign extension problems to make
29 disassembly calculate branch offsets correctly.
32 Mon Mar 24 13:22:13 1997 Ian Lance Taylor <ian@cygnus.com>
34 * sh-opc.h: Add bf/s and bt/s as synonyms for bf.s and bt.s.
36 * mips-opc.c: Add dctr and dctw.
39 Sun Mar 23 18:08:10 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
41 * d30v-dis.c (print_insn): Change the way signed constants
44 Fri Mar 21 14:37:52 1997 Ian Lance Taylor <ian@cygnus.com>
46 * Makefile.in (BFD_H): New variable.
47 (HFILES): New variable.
48 (CFILES): Add all C files.
49 (.dep, .dep1, dep.sed, dep, dep-in): New targets.
50 Delete old dependencies, and build new ones.
51 * dep-in.sed: New file.
53 Thu Mar 20 19:03:30 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
55 * m68k-opc.c (m68k_opcode_aliases): Added blo and blo{s,b,w,l}.
57 start-sanitize-coldfire
58 Wed Mar 19 06:53:58 1997 J.T. Conklin <jtc@rtl.cygnus.com>
60 * m68k-opc.c (m68k_opcodes): Provide coldfire division module
64 Tue Mar 18 14:17:03 1997 Jeffrey A Law (law@cygnus.com)
66 * mn10200-opc.c: Change "trap" to "syscall".
67 * mn10300-opc.c: Add new "syscall" instruction.
69 Mon Mar 17 08:48:03 1997 J.T. Conklin <jtc@beauty.cygnus.com>
71 * m68k-opc.c (m68k_opcodes): Provide correct entries for mulsl and
72 mulul insns on the coldfire.
74 Sat Mar 15 17:13:05 1997 Ian Lance Taylor <ian@cygnus.com>
76 * arm-dis.c (print_insn_arm): Don't print instruction bytes.
77 (print_insn_big_arm): Set bytes_per_chunk and display_endian.
78 (print_insn_little_arm): Likewise.
80 Fri Mar 14 15:08:59 1997 Ian Lance Taylor <ian@cygnus.com>
82 Based on patches from H.J. Lu <hjl@lucon.org>:
83 * i386-dis.c (fetch_data): Add prototype.
84 * m68k-dis.c (fetch_data): Add prototype.
85 (dummy_print_address): Add prototype. Make static.
86 * ppc-opc.c (valid_bo): Add prototype.
87 * sparc-dis.c (build_hash_table): Add prototype.
88 (is_delayed_branch, compute_arch_mask): Add prototypes.
89 (print_insn_sparc): Make several local variables const.
90 (compare_opcodes): Change arguments to const PTR. Add prototype.
91 * sparc-opc.c (arg): Change name field to be const.
92 (lookup_name, lookup_value): Add prototypes. Change table and
93 name parameters to be const.
94 (sparc_encode_asi): Change name parameter to be const.
95 (sparc_encode_membar, sparc_encode_prefetch): Likewise.
96 (sparc_encode_sparclet_cpreg): Likewise.
97 (sparc_decode_asi): Change return type to be const.
98 (sparc_decode_membar, sparc_decode_prefetch): Likewise.
99 (sparc_decode_sparclet_cpreg): Likewise.
101 Fri Mar 7 10:51:49 1997 Ian Lance Taylor <ian@cygnus.com>
103 * Makefile.in ($(SHLINK)): Just use ln -s, not ln -sf, since
104 Solaris doesn't like the combined options, and the -f is
106 (stamp-tshlink, install): Likewise.
108 Thu Mar 6 16:51:11 1997 Jeffrey A Law (law@cygnus.com)
110 * mn10300-opc.c (IMM16_PCREL, SD8N_PCREL, D16_SHIFT): Mark these
113 Tue Mar 4 06:10:36 1997 J.T. Conklin <jtc@cygnus.com>
115 * m68k-opc.c (m68k_opcodes): Fix last change for the mc68010.
117 Mon Mar 3 07:45:20 1997 J.T. Conklin <jtc@cygnus.com>
119 * m68k-opc.c (m68k_opcodes): Added entries for the tst insns on
122 Thu Feb 27 14:04:32 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
124 * m68k-opc.c (m68k_opcodes): Added swbegl pseudo-instruction.
127 Thu Feb 27 11:36:41 1997 Michael Meissner <meissner@cygnus.com>
129 * tic80-dis.c (print_insn_tic80): Set info->bytes_per_line to 8.
131 Wed Feb 26 15:34:48 1997 Michael Meissner <meissner@cygnus.com>
133 * tic80-opc.c (tic80_predefined_symbols): Define r25 properly.
136 Wed Feb 26 13:38:30 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
138 * m68k-dis.c (NEXTSINGLE, NEXTDOUBLE, NEXTEXTEND): Use
139 floatformat_to_double to make portable.
140 (print_insn_arg): Use NEXTEXTEND macro when extracting extended
143 Mon Feb 24 19:26:12 1997 Dawn Perchik <dawn@cygnus.com>
145 * mips-opc.c: Initialize mips_opcodes to mips_builtin_opcodes,
146 and bfd_mips_num_opcodes to bfd_mips_num_builtin_opcodes.
148 Mon Feb 24 15:19:01 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
150 * d10v-dis.c, d10v-opc.c: Change pre_defined_registers to
151 d10v_predefined_registers and reg_name_cnt to d10v_reg_name_cnt.
154 Mon Feb 24 14:33:26 1997 Fred Fish <fnf@cygnus.com>
156 * tic80-opc.c (LSI_SCALED): Renamed from this ...
157 (OFF_SL_BR_SCALED): ... to this, and added the flag
158 TIC80_OPERAND_BASEREL to the flags word.
159 (tic80_opcodes): Replace all occurances of LSI_SCALED with
163 Sat Feb 22 21:25:00 1997 Dawn Perchik <dawn@cygnus.com>
165 * mips-opc.c: Add macros for cop0, cop1 cop2 and cop3.
166 Change mips_opcodes from const array to a pointer,
167 and change bfd_mips_num_opcodes from const int to int,
168 so that we can increase the size of the mips opcodes table
172 Sat Feb 22 21:03:47 1997 Fred Fish <fnf@cygnus.com>
174 * tic80-opc.c (tic80_predefined_symbols): Revert change to
175 store BITNUM values in the table in one's complement form
176 to match behavior when assembler is given a raw numeric
177 value for a BITNUM operand.
178 * tic80-dis.c (print_operand_bitnum): Ditto.
182 Fri Feb 21 16:31:18 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
184 * d30v-opc.c: Removed references to FLAG_X.
187 Wed Feb 19 14:51:20 1997 Ian Lance Taylor <ian@cygnus.com>
189 * Makefile.in: Add dependencies on ../bfd/bfd.h as required.
192 Tue Feb 18 17:43:43 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
194 * Makefile.in: Added d30v object files.
195 * configure: (bfd_d30v_arch) Rebuilt.
196 * configure.in: (bfd_d30v_arch) Added new case.
197 * d30v-dis.c: New file.
198 * d30v-opc.c: New file.
199 * disassemble.c (disassembler) Add entry for d30v.
203 Tue Feb 18 16:32:08 1997 Fred Fish <fnf@cygnus.com>
205 * tic80-opc.c (tic80_predefined_symbols): Add symbolic
206 representations for the floating point BITNUM values.
208 Fri Feb 14 12:14:05 1997 Fred Fish <fnf@cygnus.com>
210 * tic80-opc.c (tic80_predefined_symbols): Store BITNUM values
211 in the table in one's complement form, as they appear in the
213 (tic80_symbol_to_value): Use macros to access predefined
215 (tic80_value_to_symbol): Ditto.
216 (tic80_next_predefined_symbol): New function.
217 * tic80-dis.c (print_operand_bitnum): Remove code that did
218 one's complement for BITNUM values.
222 Fri Feb 14 13:56:51 1997 Gavin Koch <gavin@cygnus.com>
224 * mips-opc.c: bug fix, can't mark insns INSN_5900 and INSN_ISA4
227 Thu Feb 13 21:56:51 1997 Klaus Kaempf <kkaempf@progis.de>
229 * makefile.vms: Remove 8 bit characters. Update to latest
232 Thu Feb 13 20:41:22 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
234 * m68k-opc.c (m68k_opcodes): Add swbeg pseudo-instruction.
236 Thu Feb 13 16:30:02 1997 Jeffrey A Law (law@cygnus.com)
238 * mn10200-opc.c (IMM16_PCREL): This is a signed operand.
239 (IMM24_PCREL): Likewise.
241 Thu Feb 13 13:28:43 1997 Ian Lance Taylor <ian@cygnus.com>
243 * mips-dis.c (print_mips16_insn_arg): Use memaddr - 2 as the base
244 address for an extended PC relative instruction that is not a
247 Wed Feb 12 12:27:40 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
249 * m68k-dis.c (print_insn_m68k): Set bytes_per_chunk and
253 Tue Feb 11 16:36:31 1997 Fred Fish <fnf@cygnus.com>
255 * tic80-opc.c (tic80_operands): Fix typo '+' -> '|'.
256 (tic80_opcodes): Sort entries so that long immediate forms
257 come after short immediate forms, making it easier for
258 assembler to select the right one for a given operand.
261 Tue Feb 11 15:26:47 1997 Ian Lance Taylor <ian@cygnus.com>
263 * mips-dis.c (_print_insn_mips): Set bytes_per_chunk and
265 (print_insn_mips16): Likewise.
268 Fri Feb 7 11:12:44 1997 Gavin Koch <gavin@cygnus.com>
270 * mips-opc.c: add r5900.
274 Mon Feb 10 10:12:41 1997 Fred Fish <fnf@cygnus.com>
276 * tic80-opc.c (tic80_symbol_to_value): Changed to accept
277 a symbol class that restricts translation to just that
278 class (general register, condition code, etc).
280 Thu Feb 6 17:34:09 1997 Fred Fish <fnf@cygnus.com>
282 * tic80-opc.c (tic80_operands): Add REG_0_E, REG_22_E,
283 and REG_DEST_E for register operands that have to be
284 an even numbered register. Add REG_FPA for operands that
285 are one of the floating point accumulator registers.
286 Add TIC80_OPERAND_MASK to flags for ENDMASK operand.
287 (tic80_opcodes): Change entries that need even numbered
288 register operands to use the new operand table entries.
289 Add "or" entries that are identical to "or.tt" entries.
292 Wed Feb 5 11:12:44 1997 Ian Lance Taylor <ian@cygnus.com>
294 * mips16-opc.c: Add new cases of exit instruction for
296 * mips-dis.c (print_mips16_insn_arg): Display floating point
297 registers in operands of exit instruction. Print `$' before
298 register names in operands of entry and exit instructions.
301 Thu Jan 30 14:09:03 1997 Fred Fish <fnf@cygnus.com>
303 * tic80-opc.c (tic80_predefined_symbols): Table of name/value
304 pairs for all predefined symbols recognized by the assembler.
305 Also used by the disassembling routines.
306 (tic80_symbol_to_value): New function.
307 (tic80_value_to_symbol): New function.
308 * tic80-dis.c (print_operand_control_register,
309 print_operand_condition_code, print_operand_bitnum):
310 Remove private tables and use tic80_value_to_symbol function.
313 Thu Jan 30 11:30:45 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
315 * d10v-dis.c (print_operand): Change address printing
316 to correctly handle PC wrapping. Fixes PR11490.
318 Wed Jan 29 09:39:17 1997 Jeffrey A Law (law@cygnus.com)
320 * mn10200-opc.c (mn10200_operands): Make 8 and 16 bit pc-relative
323 Tue Jan 28 15:57:34 1997 Ian Lance Taylor <ian@cygnus.com>
325 * mips-dis.c (print_insn_mips16): Set insn_info information.
326 (print_mips16_insn_arg): Likewise.
328 * mips-dis.c (print_insn_mips16): Better handling of an extend
329 opcode followed by an instruction which can not be extended.
331 Fri Jan 24 12:08:21 1997 J.T. Conklin <jtc@cygnus.com>
333 * m68k-opc.c (m68k_opcodes): Changed operand specifier for the
334 coldfire moveb instruction to not allow an address register as
335 destination. Although the documentation does not indicate that
336 this is invalid, experiments uncovered unexpected behavior.
337 Added a comment explaining the situation. Thanks to Andreas
338 Schwab for pointing this out to me.
341 Wed Jan 22 20:13:51 1997 Fred Fish <fnf@cygnus.com>
343 * tic80-opc.c (tic80_opcodes): Expand comment to note that the
344 entries are presorted so that entries with the same mnemonic are
345 adjacent to each other in the table. Sort the entries for each
346 instruction so that this is true.
349 Mon Jan 20 12:48:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
351 * m68k-dis.c: Include <libiberty.h>.
352 (print_insn_m68k): Sort the opcode table on the most significant
353 nibble of the opcode.
356 Sat Jan 18 15:15:05 1997 Fred Fish <fnf@cygnus.com>
358 * tic80-dis.c (tic80_opcodes): Add "wrcr", "vmpy", "vrnd",
359 "vsub", "vst", "xnor", and "xor" instructions.
360 (V_a1): Renamed from V_a, msb of accumulator reg number.
361 (V_a0): Add macro, lsb of accumulator reg number.
363 Fri Jan 17 18:24:31 1997 Fred Fish <fnf@cygnus.com>
365 * tic80-dis.c (print_insn_tic80): Broke excessively long
366 function up into several smaller ones and arranged for
367 the instruction printing function to be callable recursively
368 to print vector instructions that have both a load and a
369 math instruction packed into a single opcode.
370 * tic80-opc.c (tic80_opcodes): Expand comment for vld opcode
371 to explain why it comes after the other vector opcodes.
374 Fri Jan 17 16:19:15 1997 J.T. Conklin <jtc@beauty.cygnus.com>
376 * m68k-opc.c (m68k_opcodes): add b, w, or l specifier to coldfire
377 move insns to handle immediate operands.
379 Thu Jan 17 16:19:00 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
381 * m68k-opc.c (m68k_opcodes): Delete duplicate entry for "cmpil".
382 fix operand mask in the "moveml" entries for the coldfire.
385 Thu Jan 16 20:54:40 1997 Fred Fish <fnf@cygnus.com>
387 * tic80-opc.c (V_a, V_m, V_S, V_Z, V_p, OP_V, MASK_V):
388 New macros for building vector instruction opcodes.
389 (tic80_opcodes): Remove all uses of FMT_SI, FMT_REG, and
390 FMT_LI, which were unused. The field is now a flags field.
391 Remove some opcodes that are possible, but illegal, such
392 as long immediate instructions with doubles for immediate
393 values. Add "vadd" and "vld" instructions.
395 Wed Jan 15 18:59:51 1997 Fred Fish <fnf@cygnus.com>
397 * tic80-opc.c (tic80_operands): Reorder some table entries to make
398 the order more logical. Move the shift alias instructions ("rotl",
399 "shl", "ins", "rotr", "extu", "exts", "srl", and "sra" to be
400 interspersed with the regular sr.x and sl.x instructions. Add
401 and test new instruction opcodes for "sl", "sli", "sr", "sri", "st",
402 "sub", "subu", "swcr", and "trap".
404 Tue Jan 14 19:42:50 1997 Fred Fish <fnf@cygnus.com>
406 * tic80-opc.c (OFF_SS_PC): Renamed from OFF_SS.
407 (OFF_SL_PC): Renamed from OFF_SL.
408 (OFF_SS_BR): New operand type for base relative operand.
409 (OFF_SL_BR): New operand type for base relative operand.
410 (REG_BASE): New operand type for base register operand.
411 (tic80_opcodes): Add and test "fmpy", "frndm", "frndn", "frndp",
412 "frndz", "fsqrt", "fsub", "illop0", "illopF", "ins", "jsr",
413 "ld", "ld.u", "lmo", "or", "rdcr", "rmo", "rotl", and "rotr"
415 * tic80-dis.c (print_insn_tic80): Print opcode name with fixed width
416 10 char field, padded with spaces on rhs, rather than a string
417 followed by a tab. Use renamed TIC80_OPERAND_PCREL flag bit rather
418 than old TIC80_OPERAND_RELATIVE. Add support for new
419 TIC80_OPERAND_BASEREL flag bit.
421 Mon Jan 13 15:58:56 1997 Fred Fish <fnf@cygnus.com>
423 * tic80-dis.c (print_insn_tic80): Print floating point operands
425 * tic80-opc.c (SPFI): Add single precision floating point
426 immediate operand type.
427 (ROTATE): Add rotate operand type for shifts.
428 (ENDMASK): Add for shifts.
429 (n): Macro for the 'n' bit.
430 (i): Macro for the 'i' bit.
431 (PD): Macro for the 'PD' field.
432 (P2): Macro for the 'P2' field.
433 (P1): Macro for the 'P1' field.
434 (tic80_opcodes): Add entries for "exts", "extu", "fadd",
438 Mon Jan 6 15:06:55 1997 Jeffrey A Law (law@cygnus.com)
440 * mn10200-dis.c (disassemble): Mask off unwanted bits after
441 adding in current address for pc-relative operands.
444 Mon Jan 6 10:56:25 1997 Fred Fish <fnf@cygnus.com>
446 * tic80-dis.c (R_SCALED): Add macro to test for ":s" modifier bit.
447 (print_insn_tic80): If R_SCALED then print ":s" modifier for operand.
448 * tic80-opc.c (REG0, REG22, REG27, SSOFF, LSOFF): Names
449 changed to REG_0, REG_22, REG_DEST, OFF_SS, OFF_SL respectively.
450 (SICR, LICR, REGM_SI, REGM_LI): Names changed to CR_SI, CR_LI,
451 REG_BASE_M_SI, REG_BASE_M_LI respectively.
452 (REG_SCALED, LSI_SCALED): New operand types.
453 (E): New macro for 'E' bit at bit 27.
454 (tic80_opcodes): Add and test dld, dld.u, dst, estop, and etrap
455 opcodes, including the various size flavors (b,h,w,d) for
456 the direct load and store instructions.
458 Sun Jan 5 12:18:14 1997 Fred Fish <fnf@cygnus.com>
460 * tic80-dis.c (M_SI, M_LI): Add macros to test for ":m" modifier bit
462 * tic80-dis.c (print_insn_tic80): Change comma and paren handling.
463 Use M_SI and M_LI macros to check for ":m" modifier for GPR operands.
464 * tic80-opc.c (tic80_operands): Add REGM_SI and REGM_LI operands.
465 (F, M_REG, M_LI, M_SI, SZ_REG, SZ_LI, SZ_SI, D, S): New bit-twiddlers.
466 (MASK_LI_M, MASK_SI_M, MASK_REG_M): Remove and replace in opcode
467 masks with "MASK_* & ~M_*" to get the M bit reset.
468 (tic80_opcodes): Add bsr, bsr.a, cmnd, cmp, dcachec, and dcachef.
470 Sat Jan 4 19:05:05 1997 Fred Fish <fnf@cygnus.com>
472 * tic80-dis.c (print_insn_tic80): Print TIC80_OPERAND_RELATIVE
473 correctly. Add support for printing TIC80_OPERAND_BITNUM and
474 TIC80_OPERAND_CC, and TIC80_OPERAND_CR operands in symbolic
476 * tic80-opc.c (tic80_operands): Add SSOFF, LSOFF, BITNUM,
477 CC, SICR, and LICR table entries.
478 (tic80_opcodes): Add and test "nop", "br", "bbo", "bbz",
479 "bcnd", and "brcr" opcodes.
482 Fri Jan 3 18:32:11 1997 Fred Fish <fnf@cygnus.com>
484 * ppc-opc.c (powerpc_operands): Make comment match the
485 actual fields (no shift field).
486 * sparc-opc.c (sparc_opcodes): Document why this cannot be "const".
488 * tic80-dis.c (print_insn_tic80): Replace abort stub with a
489 partial implementation, work in progress.
490 * tic80-opc.c (tic80_operands): Begin construction operands table.
491 (tic80_opcodes): Continue populating opcodes table and start
492 filling in the operand indices.
493 (tic80_num_opcodes): Add this.
496 Fri Jan 3 12:13:52 1997 Ian Lance Taylor <ian@cygnus.com>
498 * m68k-opc.c: Add #B case for moveq.
500 Thu Jan 2 12:14:29 1997 Jeffrey A Law (law@cygnus.com)
502 * mn10300-dis.c (disassemble): Make sure all variables are initialized
503 before they are used.
506 Tue Dec 31 12:20:38 1996 Jeffrey A Law (law@cygnus.com)
508 * v850-opc.c (v850_opcodes): Put curly-braces around operands
509 for "breakpoint" instruction.
512 Tue Dec 31 15:38:13 1996 Ian Lance Taylor <ian@cygnus.com>
514 * Makefile.in (ALL_CFLAGS): Add -D_GNU_SOURCE.
515 (dep): Use ALL_CFLAGS rather than CFLAGS.
518 Tue Dec 31 15:09:16 1996 Michael Meissner <meissner@tiktok.cygnus.com>
520 * v850-opc.c (D8_{6,7}): Set V850_OPERAND_ADJUST_SHORT_MEMORY
524 Mon Dec 30 17:02:11 1996 Fred Fish <fnf@cygnus.com>
526 * Makefile.in (m68k-opc.o, alpha-opc.o): Remove dis-asm.h dependency.
528 (tic80-dis.o, tic80-opc.o): Add rules per comment in Makefile.in.
531 Mon Dec 30 11:38:01 1996 Ian Lance Taylor <ian@cygnus.com>
533 * mips16-opc.c: Add "abs".
536 Sun Dec 29 10:58:22 1996 Fred Fish <fnf@cygnus.com>
538 * Makefile.in (ALL_MACHINES): Add tic80-dis.o and tic80-opc.o.
539 * disassemble.c (ARCH_tic80): Define if ARCH_all is defined.
540 (disassembler): Add bfd_arch_tic80 support to set disassemble
542 * tic80-dis.c (print_insn_tic80): Add stub.
544 Fri Dec 27 22:30:57 1996 Fred Fish <fnf@cygnus.com>
546 * configure.in (arch in $selarchs): Add bfd_tic80_arch entry.
547 * configure: Regenerate with autoconf.
548 * tic80-dis.c: Add file.
549 * tic80-opc.c: Add file.
552 Fri Dec 20 14:30:19 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
554 * d10v-opc.c (pre_defined_registers): Add cr[0-15], dpc, dpsw, link.
556 Mon Dec 16 13:00:15 1996 Jeffrey A Law (law@cygnus.com)
558 * mn10200-opc.c (mn10200_operands): Add SIMM16N.
559 (mn10200_opcodes): Use it for some logicals and btst insns.
560 Add "break" and "trap" instructions.
562 * mn10300-opc.c (mn10300_opcodes): Add "break" instruction.
564 * mn10200-opc.c: Add pseudo-ops for "mov (an),am" and "mov an,(am)".
566 Sat Dec 14 22:36:20 1996 Ian Lance Taylor <ian@cygnus.com>
568 * mips-dis.c (print_mips16_insn_arg): The base address of a PC
569 relative load or add now depends upon whether the instruction is
572 Wed Dec 11 09:23:46 1996 Jeffrey A Law (law@cygnus.com)
574 * mn10200-dis.c: Finish writing disassembler.
575 * mn10200-opc.c (mn10200_opcodes): Fix mask for "mov imm8,dn".
576 Fix mask for "jmp (an)".
578 * mn10300-dis.c (disassemble, print_insn_mn10300): Corrently
579 handle endianness issues for mn10300.
581 * mn10200-opc.c (mn10200_opcodes): Fix operands for "movb dm,(an)".
583 Tue Dec 10 12:08:05 1996 Jeffrey A Law (law@cygnus.com)
585 * mn10200-opc.c (mn10200_opcodes): "mov imm8,d0" is a format 2
586 instruction. Fix opcode field for "movb (imm24),dn".
588 * mn10200-opc.c (mn10200_operands): Fix insertion position
591 Mon Dec 9 16:42:43 1996 Jeffrey A Law (law@cygnus.com)
593 * mn10200-opc.c: Create mn10200 opcode table.
594 * mn10200-dis.c: Flesh out mn10200 disassembler. Not ready,
595 but moving along nicely.
597 Sun Dec 8 04:28:31 1996 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
599 * Makefile.in (ALL_MACHINES): Add mips16-opc.o.
601 Fri Dec 6 16:47:40 1996 J.T. Conklin <jtc@rhino.cygnus.com>
603 * m68k-opc.c (m68k_opcodes): Revert change to use < and >
604 specifiers for fmovem* instructions.
606 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
608 * mn10300-dis.c (disassemble): Remove '$' register prefixing.
610 Fri Dec 6 17:34:39 1996 Ian Lance Taylor <ian@cygnus.com>
612 * mips16-opc.c: Change opcode for entry/exit to avoid conflicting
615 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
617 * mn10300-opc.c: Add some comments explaining the various
620 * mn10300-dis.c (disassemble): Fix minor gcc -Wall warnings.
622 Thu Dec 5 12:09:48 1996 J.T. Conklin <jtc@rtl.cygnus.com>
624 * m68k-dis.c (print_insn_arg): Handle new < and > operand
627 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
628 operand specifiers in fmovm* instructions.
630 Wed Dec 4 14:52:18 1996 Ian Lance Taylor <ian@cygnus.com>
632 * ppc-opc.c (insert_li): Give an error if the offset has the two
633 least significant bits set.
635 Wed Nov 27 13:09:01 1996 Ian Lance Taylor <ian@cygnus.com>
637 * mips-dis.c (print_insn_mips16): Separate the instruction from
638 the arguments with a tab, not a space.
640 Tue Nov 26 13:24:17 1996 Jeffrey A Law (law@cygnus.com)
642 * mn10300-dis.c (disasemble): Finish conversion to '$' as
645 * mn10300-opc.c (mn10300_opcodes): Fix mask field for
648 Tue Nov 26 10:53:21 1996 Ian Lance Taylor <ian@cygnus.com>
650 * configure: Rebuild with autoconf 2.12.
652 Add support for mips16 (16 bit MIPS implementation):
653 * mips16-opc.c: New file.
654 * mips-dis.c: Include "elf-bfd.h" and "elf/mips.h".
655 (mips16_reg_names): New static array.
656 (print_insn_big_mips): Use print_insn_mips16 in 16 bit mode or
657 after seeing a 16 bit symbol.
658 (print_insn_little_mips): Likewise.
659 (print_insn_mips16): New static function.
660 (print_mips16_insn_arg): New static function.
661 * mips-opc.c: Add jalx instruction.
662 * Makefile.in (mips16-opc.o): New target.
663 * configure.in: Use mips16-opc.o for bfd_mips_arch.
664 * configure: Rebuild.
666 Mon Nov 25 16:15:17 1996 J.T. Conklin <jtc@cygnus.com>
668 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
669 operand specifiers in *save, *restore and movem* instructions.
671 * m68k-opc.c (m68k_opcodes): Fix move and movem instructions for
674 * m68k-opc.c (m68k_opcodes): The coldfire (mcf5200) can only use
675 register operands for immediate arithmetic, not, neg, negx, and
676 set according to condition instructions.
678 * m68k-opc.c (m68k_opcodes): Consistantly Use "s" as the storage
679 specifier of the effective-address operand in immediate forms of
680 arithmetic instructions. The specifier for the immediate operand
681 notes how and where the constant will be stored.
683 Mon Nov 25 11:17:01 1996 Jeffrey A Law (law@cygnus.com)
685 * mn10300-opc.c (mn10300_opcodes): Remove redundant "lcc"
688 * mn10300-dis.c (disassemble): Use '$' instead of '%' for
691 * mn10300-dis.c (disassemble): Prefix registers with '%'.
693 Wed Nov 20 10:37:13 1996 Jeffrey A Law (law@cygnus.com)
695 * mn10300-dis.c (disassemble): Handle register lists.
697 * mn10300-opc.c: Fix handling of register list operand for
698 "call", "ret", and "rets" instructions.
700 * mn10300-dis.c (disassemble): Print PC-relative and memory
701 addresses symbolically if possible.
702 * mn10300-opc.c: Distinguish between absolute memory addresses,
703 pc-relative offsets & random immediates.
705 * mn10300-dis.c (print_insn_mn10300): Fix fetch of last byte
707 (disassemble): Handle SPLIT and EXTENDED operands.
709 Tue Nov 19 13:33:01 1996 Jeffrey A Law (law@cygnus.com)
711 * mn10300-dis.c: Rough cut at printing some operands.
713 * mn10300-dis.c: Start working on disassembler support.
714 * mn10300-opc.c (mn10300_opcodes): Fix masks on several insns.
716 * mn10300-opc.c (mn10300_operands): Add "REGS" for a register
718 (mn10300_opcodes): Use REGS for register list in "movm" instructions.
720 Mon Nov 18 15:20:35 1996 Michael Meissner <meissner@tiktok.cygnus.com>
722 * d10v-opc.c (d10v_opcodes): Add3 sets the carry.
724 Fri Nov 15 13:43:19 1996 Jeffrey A Law (law@cygnus.com)
726 * mn10300-opc.c (mn10300_opcodes): Demand parens around
727 register argument is calls and jmp instructions.
729 Thu Nov 7 00:26:05 1996 Jeffrey A Law (law@cygnus.com)
731 * mn10300-opc.c (mn10300_opcodes): Use DN01 for putx and
732 getx operand. Fix opcode for mulqu imm,dn.
734 Wed Nov 6 13:42:32 1996 Jeffrey A Law (law@cygnus.com)
736 * mn10300-opc.c (mn10300_operands): Hijack "bits" field
737 in MN10300_OPERAND_SPLIT operands for how many bits
738 appear in the basic insn word. Add IMM32_HIGH24,
739 IMM32_HIGH24_LOWSHIFT8, IMM8E_SHIFT8.
740 (mn10300_opcodes): Use new operands as needed.
742 * mn10300-opc.c (mn10300_operands): Add IMM32_LOWSHIFT8
743 for bset, bclr, btst instructions.
744 (mn10300_opcodes): Use new IMM32_LOWSHIFT8 as needed.
746 * mn10300-opc.c (mn10300_operands): Remove many redundant
747 operands. Update opcode table as appropriate.
748 (IMM32): Add MN10300_OPERAND_SPLIT flag.
749 (mn10300_opcodes): Fix single bit error in mov imm32,dn insn.
751 Tue Nov 5 13:26:58 1996 Jeffrey A Law (law@cygnus.com)
753 * mn10300-opc.c (mn10300_operands): Add DN2, DM2, AN2, AM2
754 operands (for indexed load/stores). Fix bitpos for DI
755 operand. Add SN8N_SHIFT8, IMM8_SHIFT8, and D16_SHIFT for the
756 few instructions that insert immediates/displacements in the
757 middle of the instruction. Add IMM8E for 8 bit immediate in
758 the extended part of an instruction.
759 (mn10300_operands): Use new opcodes as appropriate.
761 Tue Nov 5 10:30:51 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
763 * d10v-opc.c (d10v_opcodes): Declare the trap instruction
764 sequential so the assembler never parallelizes it with
767 Mon Nov 4 12:50:40 1996 Jeffrey A Law (law@cygnus.com)
769 * mn10300-opc.c (mn10300_operands): Add DN01 and AN01 for
770 a data/address register that appears in register field 0
771 and register field 1.
772 (mn10300_opcodes): Use DN01 and AN01 for mov/cmp imm8,DN/AN
774 Fri Nov 1 10:29:11 1996 Richard Henderson <rth@tamu.edu>
776 * alpha-dis.c (print_insn_alpha): Use new NOPAL mask for
777 standard disassembly.
779 * alpha-opc.c (alpha_operands): Rearrange flags slot.
780 (alpha_opcodes): Add new BWX, CIX, and MAX instructions.
781 Recategorize PALcode instructions.
784 Wed Oct 30 16:46:58 1996 Jeffrey A Law (law@cygnus.com)
786 * v850-opc.c (v850_opcodes): Add relaxing "jbr".
789 Tue Oct 29 16:30:28 1996 Ian Lance Taylor <ian@cygnus.com>
791 * mips-dis.c (_print_insn_mips): Don't print a trailing tab if
792 there are no operand types.
795 Tue Oct 29 12:22:21 1996 Jeffrey A Law (law@cygnus.com)
797 * v850-opc.c (D9_RELAX): Renamed from D9, all references
799 (v850_operands): Make sure D22 immediately follows D9_RELAX.
802 Fri Oct 25 12:12:53 1996 Ian Lance Taylor <ian@cygnus.com>
804 * i386-dis.c (print_insn_x86): Set info->bytes_per_line to 5.
807 Thu Oct 24 17:53:52 1996 Jeffrey A Law (law@cygnus.com)
809 * v850-opc.c (insert_d8_6): Fix operand insertion for sld.w
810 and sst.w instructions.
812 * v850-opc.c (v850_opcodes): Add "jCC" instructions (aliases for
816 Thu Oct 24 17:21:20 1996 Ian Lance Taylor <ian@cygnus.com>
818 * mips-dis.c (_print_insn_mips): Use a tab between the instruction
821 Tue Oct 22 23:32:56 1996 Ian Lance Taylor <ian@cygnus.com>
823 * ppc-opc.c (PPCPWR2): Define.
824 (powerpc_opcodes): Use PPCPWR2 for fsqrt, rather than duplicating
827 Fri Oct 11 16:03:49 1996 Jeffrey A Law (law@cygnus.com)
829 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode
830 field for movhu instruction.
833 * v850-dis.c (disassemble): For V850_OPERAND_SIGNED operands,
834 cast value to "long" not "signed long" to keep hpux10
838 Thu Oct 10 10:25:58 1996 Jeffrey A Law (law@cygnus.com)
840 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode field
843 * mn10300-opc.c (FMT*): Remove definitions.
845 * mn10300-opc.c (mn10300_opcodes): Fix destination register
846 for shift-by-register opcodes.
848 * mn10300-opc.c (mn10300_operands): Break DN, DM, AN, AM
849 into [AD][MN][01] for encoding the position of the register
852 Wed Oct 9 11:19:26 1996 Jeffrey A Law (law@cygnus.com)
854 * mn10300-opc.c (mn10300_opcodes): Add "extended" instructions,
855 "putx", "getx", "mulq", "mulqu", "sat16", "sat24", "bsch".
857 Tue Oct 8 11:55:35 1996 Jeffrey A Law (law@cygnus.com)
859 * mn10300-opc.c (mn10300_operands): Remove "REGS" operand.
860 Fix various typos. Add "PAREN" operand.
862 (mn10300_opcodes): Surround all memory addresses with "PAREN"
863 operands. Fix several typos.
865 * mn10300-opc.c (mn10300_opcodes): Fix typos in yesterday's
868 Mon Oct 7 16:48:45 1996 Jeffrey A Law (law@cygnus.com)
870 * mn10300-opc.c (FMT_XX): Renumber starting at one.
871 (mn10300_operands): Rough cut. Enough to parse "mov" instructions
873 (mn10300_opcodes): Break opcode format out into its own field.
874 Update many operand fields to deal with signed vs unsigned
875 issues. Fix one or two typos in the "mov" instruction
876 opcode, mask and/or operand fields.
878 Mon Oct 7 11:39:49 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
880 * m68k-opc.c (plusha): Prefer encoding for m68040up, in case
883 Thu Oct 3 17:17:02 1996 Ian Lance Taylor <ian@cygnus.com>
885 * mn10300-opc.c (mn10300_opcodes): Add opcode & masks for
886 all opcodes. Very rough cut at operands for all opcodes.
888 * mn10300-opc.c (mn10300_opcodes): Start fleshing out the
891 Thu Oct 3 10:06:07 1996 Jeffrey A Law (law@cygnus.com)
893 * mn10200-opc.c, mn10300-opc.c: New files.
894 * mn10200-dis.c, mn10300-dis.c: New files.
895 * mn10x00-opc.c, mn10x00-dis.c: Deleted.
896 * disassemble.c: Break mn10x00 support into 10200 and 10300
898 * configure.in: Likewise.
899 * configure: Rebuilt.
901 Thu Oct 3 15:59:12 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
903 * Makefile.in (MOSTLYCLEAN): Move config.log to distclean.
905 Wed Oct 2 23:28:42 1996 Jeffrey A Law (law@cygnus.com)
907 * mn10x00-opc.c, mn10x00-dis.c: New files for Matsushita
909 * disassemble (ARCH_mn10x00): Define.
910 (disassembler): Handle bfd_arch_mn10x00.
911 * configure.in: Recognize bfd_mn10x00_arch.
912 * configure: Rebuilt.
914 Tue Oct 1 10:49:11 1996 Ian Lance Taylor <ian@cygnus.com>
916 * i386-dis.c (op_rtn): Change to be a pointer. Adjust uses
917 accordingly. Don't declare functions using op_rtn.
920 Fri Sep 27 18:28:59 1996 Stu Grossman (grossman@critters.cygnus.com)
922 * v850-dis.c (disassemble): Add memaddr argument. Re-arrange
923 params to be more standard.
924 * (disassemble): Print absolute addresses and symbolic names for
925 branch and jump targets.
926 * v850-opc.c (v850_operand): Add displacement flag to 9 and 22
928 * (v850_opcodes): Add breakpoint insn.
931 Mon Sep 23 12:32:26 1996 Ian Lance Taylor <ian@cygnus.com>
933 * m68k-opc.c: Move the fmovemx data register cases before the
934 other cases, so that they get recognized before the data register
935 does gets treated as a degenerate register list.
937 Tue Sep 17 12:06:51 1996 Ian Lance Taylor <ian@cygnus.com>
939 * mips-opc.c: Add a case for "div" and "divu" with two registers
940 and a destination of $0.
942 Tue Sep 10 16:12:39 1996 Fred Fish <fnf@rtl.cygnus.com>
944 * mips-dis.c (print_insn_arg): Add prototype.
945 (_print_insn_mips): Ditto.
947 Mon Sep 9 14:26:26 1996 Ian Lance Taylor <ian@cygnus.com>
949 * mips-dis.c (print_insn_arg): Print condition code registers as
952 Tue Sep 3 12:09:46 1996 Doug Evans <dje@canuck.cygnus.com>
954 * sparc-opc.c (sparc_opcodes): Add setuw, setsw, setx.
957 Tue Sep 3 12:05:25 1996 Jeffrey A Law (law@cygnus.com)
959 * v850-dis.c (disassemble): Make static. Provide prototype.
961 Sun Sep 1 22:30:40 1996 Jeffrey A Law (law@cygnus.com)
963 * v850-opc.c (insert_d9, insert_d22): Fix boundary case
966 Sat Aug 31 01:27:26 1996 Jeffrey A Law (law@cygnus.com)
968 * v850-dis.c (disassemble): Handle insertion of ',', '[' and
969 ']' characters into the output stream.
970 * v850-opc.c (v850_opcodes: Remove size field from all opcodes.
971 Add "memop" field to all opcodes (for the disassembler).
972 Reorder opcodes so that "nop" comes before "mov" and "jr"
975 * v850-dis.c (print_insn_v850): Fix typo in last change.
977 * v850-dis.c (print_insn_v850): Properly handle disassembling
978 a two byte insn at the end of a memory region when the memory
979 region's size is only two byte aligned.
981 * v850-dis.c (v850_cc_names): Fix stupid thinkos.
983 * v850-dis.c (v850_reg_names): Define.
984 (v850_sreg_names, v850_cc_names): Likewise.
985 (disassemble): Very rough cut at printing operands (unformatted).
987 * v850-opc.c (BOP_MASK): Fix.
988 (v850_opcodes): Fix mask for jarl and jr.
990 * v850-dis.c: New file. Skeleton for disassembler support.
991 * Makefile.in Remove v850 references, they're not needed here
992 and they weren't being sanitized away.
993 * configure.in: Add v850-dis.o when building v850 toolchains.
994 * configure: Rebuilt.
995 * disassemble.c (disassembler): Call v850 disassembler.
997 * v850-opc.c (insert_d8_7, extract_d8_7): New functions.
998 (insert_d8_6, extract_d8_6): New functions.
999 (v850_operands): Rename D7S to D7; operand for D7 is unsigned.
1000 Rename D8 to D8_7, use {insert,extract}_d8_7 routines.
1002 (IF4A, IF4B): Use "D7" instead of "D7S".
1003 (IF4C, IF4D): Use "D8_7" instead of "D8".
1004 (IF4E, IF4F): New. Use "D8_6".
1005 (v850_opcodes): Use IF4A/IF4B for sld.b/sst.b. Use IF4C/IF4D for
1006 sld.h/sst.h. Use IF4E/IF4F for sld.w/sst.w.
1008 * v850-opc.c (insert_d16_15, extract_d16_15): New functions.
1009 (v850_operands): Change D16 to D16_15, use special insert/extract
1010 routines. New new D16 that uses the generic insert/extract code.
1011 (IF7A, IF7B): Use D16_15.
1012 (IF7C, IF7D): New. Use D16.
1013 (v850_opcodes): Use IF7C and IF7D for ld.b and st.b.
1015 * v850-opc.c (insert_d9, insert_d22): Slightly improve error
1016 message. Issue an error if the branch offset is odd.
1018 * v850-opc.c: Add notes about needing special insert/extract
1019 for all the load/store insns, except "ld.b" and "st.b".
1021 * v850-opc.c (insert_d22, extract_d22): New functions.
1022 (v850_operands): Use insert_d22 and extract_d22 for
1024 (insert_d9): Fix range check.
1026 Fri Aug 30 18:01:02 1996 J.T. Conklin <jtc@hippo.cygnus.com>
1028 * v850-opc.c (v850_operands): Add V850_OPERAND_SIGNED flag
1029 and set bits field to D9 and D22 operands.
1031 Thu Aug 29 11:10:46 1996 Jeffrey A Law (law@cygnus.com)
1033 * v850-opc.c (v850_operands): Define SR2 operand.
1034 (v850_opcodes): "ldsr" uses R1,SR2.
1036 * v850-opc.c (v850_opcodes): Fix opcode specs for
1037 sld.w, sst.b, sst.h, sst.w, and nop.
1039 Wed Aug 28 15:55:43 1996 Jeffrey A Law (law@cygnus.com)
1041 * v850-opc.c (v850_opcodes): Add null opcode to mark the
1042 end of the opcode table.
1045 Mon Aug 26 13:35:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1047 * d10v-opc.c (pre_defined_registers): Added register pairs,
1048 "r0-r1", "r2-r3", etc.
1051 Fri Aug 23 00:27:01 1996 Jeffrey A Law (law@cygnus.com)
1053 * v850-opc.c (v850_operands): Make I16 be a signed operand.
1054 Create I16U for an unsigned 16bit mmediate operand.
1055 (v850_opcodes): Use I16U for "ori", "andi" and "xori".
1057 * v850-opc.c (v850_operands): Define EP operand.
1058 (IF4A, IF4B, IF4C, IF4D): Use EP.
1060 * v850-opc.c (v850_opcodes): Fix opcode numbers for "mov"
1061 with immediate operand, "movhi". Tweak "ldsr".
1063 * v850-opc.c (v850_opcodes): Get ld.[bhw] and st.[bhw]
1064 correct. Get sld.[bhw] and sst.[bhw] closer.
1066 * v850-opc.c (v850_operands): "not" is a two byte insn
1068 * v850-opc.c (v850_opcodes): Correct bit pattern for setf.
1070 * v850-opc.c (v850_operands): D16 inserts at offset 16!
1072 * v850-opc.c (two): Get order of words correct.
1074 * v850-opc.c (v850_operands): I16 inserts at offset 16!
1076 * v850-opc.c (v850_operands): Add "SR1" and "SR2" for system
1077 register source and destination operands.
1078 (v850_opcodes): Use SR1 and SR2 for "ldsr" and "stsr".
1080 * v850-opc.c (v850_opcodes): Fix thinko in "jmp" opcode. Fix
1081 same thinko in "trap" opcode.
1083 * v850-opc.c (v850_opcodes): Add initializer for size field
1086 * v850-opc.c (v850_operands): D6 -> DS7. References changed.
1087 Add D8 for 8-bit unsigned field in short load/store insns.
1088 (IF4A, IF4D): These both need two registers.
1089 (IF4C, IF4D): Define. Use 8-bit unsigned field.
1090 (v850_opcodes): For "sld.h", "sld.w", "sst.h", "sst.w", use
1091 IF4C & IF4D. For "trap" use I5U, not I5. Add IF1 operand
1092 for "ldsr" and "stsr".
1093 * v850-opc.c (v850_operands): 3-bit immediate for bit insns
1096 * v850-opc.c (v850_opcodes): Correct short store half (sst.h) and
1097 short store word (sst.w).
1099 Thu Aug 22 16:57:27 1996 J.T. Conklin <jtc@rtl.cygnus.com>
1101 * v850-opc.c (v850_operands): Added insert and extract fields,
1102 pointers to functions that handle unusual operand encodings.
1104 Thu Aug 22 01:05:24 1996 Jeffrey A Law (law@cygnus.com)
1106 * v850-opc.c (v850_opcodes): Enable "trap".
1108 * v850-opc.c (v850_opcodes): Fix order of displacement
1109 and register for "set1", "clr1", "not1", and "tst1".
1111 Wed Aug 21 18:46:26 1996 Jeffrey A Law (law@cygnus.com)
1113 * v850-opc.c (v850_operands): Add "B3" support.
1114 (v850_opcodes): Fix and enable "set1", "clr1", "not1"
1117 * v850-opc.c (v850_opcodes): "jmp" has only an R1 operand.
1119 * v850-opc.c: Close unterminated comment.
1121 Wed Aug 21 17:31:26 1996 J.T. Conklin <jtc@hippo.cygnus.com>
1123 * v850-opc.c (v850_operands): Add flags field.
1124 (v850_opcodes): add move opcodes.
1126 Tue Aug 20 14:41:03 1996 J.T. Conklin <jtc@hippo.cygnus.com>
1128 * Makefile.in (ALL_MACHINES): Add v850-opc.o.
1129 * configure: (bfd_v850v_arch) Add new case.
1130 * configure.in: (bfd_v850_arch) Add new case.
1131 * v850-opc.c: New file.
1134 Mon Aug 19 15:21:38 1996 Doug Evans <dje@canuck.cygnus.com>
1136 * sparc-dis.c (print_insn_sparc): Handle little endian sparcs.
1138 Thu Aug 15 13:14:43 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1140 * d10v-opc.c: Add additional information to the opcode
1141 table to help determinine which instructions can be done
1144 Thu Aug 15 13:11:13 1996 Stan Shebs <shebs@andros.cygnus.com>
1146 * mpw-make.sed: Update editing of include pathnames to be
1149 Thu Aug 15 16:28:41 1996 James G. Smith <jsmith@cygnus.co.uk>
1151 * arm-opc.h: Added "bx" instruction definition.
1153 Wed Aug 14 17:00:04 1996 Richard Henderson <rth@tamu.edu>
1155 * alpha-opc.c (EV4EXTHWINDEX): Field width should be 8 not 5.
1157 Mon Aug 12 14:30:37 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1159 * d10v-opc.c (d10v_opcodes): Minor fixes to addi and bl.l.
1161 Fri Aug 9 13:21:59 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1163 * d10v-opc.c (d10v_opcodes): Correct 'mv' unit entry to EITHER.
1165 Thu Aug 8 12:43:52 1996 Klaus Kaempf <kkaempf@progis.de>
1167 * makefile.vms: Update for alpha-opc changes.
1169 Wed Aug 7 11:55:10 1996 Ian Lance Taylor <ian@cygnus.com>
1171 * i386-dis.c (print_insn_i386): Actually return the correct value.
1172 (ONE, OP_ONE): #ifdef out; not used.
1174 Fri Aug 2 17:47:03 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1176 * d10v-opc.c (d10v_opcodes): Added 2 accumulator sub instructions.
1177 Changed subi operand type to treat 0 as 16.
1179 Wed Jul 31 16:21:41 1996 Ian Lance Taylor <ian@cygnus.com>
1181 * m68k-opc.c: Add cpushl for the mcf5200. From Ken Rose
1184 Wed Jul 31 14:39:27 1996 James G. Smith <jsmith@cygnus.co.uk>
1186 * arm-opc.h: (arm_opcodes): Added halfword and sign-extension
1187 memory transfer instructions. Add new format string entries %h and %s.
1188 * arm-dis.c: (print_insn_arm): Provide decoding of the new
1191 Fri Jul 26 11:45:04 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1193 * d10v-opc.c (d10v_operands): Added UNUM4S; a 4-bit accumulator shift.
1194 (d10v_opcodes): Modified accumulator shift instructions to use UNUM4S.
1196 Fri Jul 26 14:01:43 1996 Ian Lance Taylor <ian@cygnus.com>
1198 * alpha-dis.c (print_insn_alpha_osf): Remove.
1199 (print_insn_alpha_vms): Remove.
1200 (print_insn_alpha): Make globally visible. Chose the register
1201 names based on info->flavour.
1202 * disassemble.c: Always return print_insn_alpha for the alpha.
1204 Thu Jul 25 15:24:17 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1206 * d10v-dis.c (dis_long): Handle unknown opcodes.
1208 Thu Jul 25 12:08:09 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1210 * d10v-opc.c: Changes to support signed and unsigned numbers.
1211 All instructions with the same name that have long and short forms
1212 now end in ".l" or ".s". Divs added.
1213 * d10v-dis.c: Changes to support signed and unsigned numbers.
1215 Tue Jul 23 11:02:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1217 * d10v-dis.c: Change all functions to use info->print_address_func.
1219 Mon Jul 22 15:38:53 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1221 * m68k-opc.c (m68k_opcodes): Make opcode masks for the ColdFire
1222 move ccr/sr insns more strict so that the disassembler only
1223 selects them when the addressing mode is data register.
1225 Mon Jul 22 11:25:24 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1226 * d10v-opc.c (pre_defined_registers): Declare.
1227 * d10v-dis.c (print_operand): Now uses pre_defined_registers
1228 to pick a better name for the registers.
1230 Mon Jul 22 13:47:23 1996 Ian Lance Taylor <ian@cygnus.com>
1232 * sparc-opc.c: Fix opcode values for fpack16, and fpackfix. Fix
1233 operands for fexpand and fpmerge. From Christian Kuehnke
1234 <Christian.Kuehnke@arbi.informatik.uni-oldenburg.de>.
1236 Mon Jul 22 13:17:06 1996 Richard Henderson <rth@tamu.edu>
1238 * alpha-dis.c (print_insn_alpha): No longer the user-visible
1239 print routine. Take new regnames and cpumask arguments.
1240 Kill the environment variable nonsense.
1241 (print_insn_alpha_osf): New function. Do OSF/1 style regnames.
1242 (print_insn_alpha_vms): New function. Do VMS style regnames.
1243 * disassemble.c (disassembler): Test bfd flavour to pick
1244 between OSF and VMS routines. Default to OSF.
1246 Thu Jul 18 17:19:34 1996 Ian Lance Taylor <ian@cygnus.com>
1248 * configure.in: Call AC_SUBST (INSTALL_SHLIB).
1249 * configure: Rebuild.
1250 * Makefile.in (install): Use @INSTALL_SHLIB@.
1252 Wed Jul 17 14:39:05 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1254 * configure: (bfd_d10v_arch) Add new case.
1255 * configure.in: (bfd_d10v_arch) Add new case.
1256 * d10v-dis.c: New file.
1257 * d10v-opc.c: New file.
1258 * disassemble.c (disassembler) Add entry for d10v.
1260 Wed Jul 17 10:12:05 1996 J.T. Conklin <jtc@rtl.cygnus.com>
1262 * m68k-opc.c (m68k_opcodes): Fix bugs in coldfire insns relating
1263 to bcc, trapfl, subxl, and wddata discovered by Andreas Schwab.
1265 Mon Jul 15 16:59:55 1996 Stu Grossman (grossman@critters.cygnus.com)
1267 * i386-dis.c: Get rid of print_insn_i8086. Use info.mach to
1268 distinguish between variants of the instruction set.
1269 * sparc-dis.c: Get rid of print_insn_sparclite. Use info.mach to
1270 distinguish between variants of the instruction set.
1272 Fri Jul 12 10:12:01 1996 Stu Grossman (grossman@critters.cygnus.com)
1274 * i386-dis.c (print_insn_i8086): New routine to disassemble using
1275 the 8086 instruction set.
1276 * i386-dis.c: General cleanups. Make most things static. Add
1277 prototypes. Get rid of static variables aflags and dflags. Pass
1278 them as args (to almost everything).
1280 Thu Jul 11 11:58:44 1996 Jeffrey A Law (law@cygnus.com)
1282 * h8300-dis.c (bfd_h8_disassemble): Handle macregs in ldmac insns.
1284 * h8300-dis.c (bfd_h8_disassemble): Handle "ldm.l" and "stm.l".
1286 * h8300-dis.c (bfd_h8_disassemble): "abs" is implicitly two
1287 if the next arg is marked with SRC_IN_DST. Gross.
1289 * h8300-dis.c (bfd_h8_disassemble): Print "exr" when
1290 we're looking for and find EXR.
1292 * h8300-dis.c (bfd_h8_disassemble): We don't have a match
1293 if we're looking for KBIT and we don't find it.
1295 * h8300-dis.c (bfd_h8_disassemble): Mask off unwanted bits
1298 * h8300-dis.c (bfd_h8_disassemble): Don't set plen for
1299 3bit immediate operands.
1301 Tue Jul 9 10:55:20 1996 Ian Lance Taylor <ian@cygnus.com>
1303 * Released binutils 2.7.
1305 * alpha-opc.c: Add new case of "mov". From Klaus Kaempf
1306 <kkaempf@progis.ac-net.de>.
1308 Thu Jul 4 11:42:51 1996 Ian Lance Taylor <ian@cygnus.com>
1310 * alpha-opc.c: Correct second case of "mov" to use OPRL.
1312 Wed Jul 3 16:03:47 1996 Stu Grossman (grossman@critters.cygnus.com)
1314 * sparc-dis.c (print_insn_sparclite): New routine to print
1315 sparclite instructions.
1317 Wed Jul 3 14:21:18 1996 J.T. Conklin <jtc@rtl.cygnus.com>
1319 * m68k-opc.c (m68k_opcodes): Add coldfire support.
1321 Fri Jun 28 15:53:51 1996 Doug Evans <dje@canuck.cygnus.com>
1323 * sparc-opc.c (asi_table): Add #ASI_N, #ASI_N_L, #ASI_NUCLEUS,
1324 #ASI_NUCLEUS_LITTLE. Rename #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_L
1325 to #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_LITTLE.
1327 Tue Jun 25 22:58:31 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
1329 * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir):
1330 Use autoconf-set values.
1331 (docdir, oldincludedir): Removed.
1332 * configure.in (AC_PREREQ): autoconf 2.5 or higher.
1334 Fri Jun 21 13:53:36 1996 Richard Henderson <rth@tamu.edu>
1336 * alpha-opc.c: New file.
1337 * alpha-opc.h: Remove.
1338 * alpha-dis.c: Complete rewrite to use new opcode table.
1339 * configure.in: For bfd_alpha_arch, use alpha-opc.o.
1340 * configure: Rebuild with autoconf 2.10.
1341 * Makefile.in (ALL_MACHINES): Add alpha-opc.o.
1342 (alpha-dis.o): Depend upon $(INCDIR)/opcode/alpha.h, not
1344 (alpha-opc.o): New target.
1346 Wed Jun 19 15:55:12 1996 Ian Lance Taylor <ian@cygnus.com>
1348 * sparc-dis.c (print_insn_sparc): Remove unused local variable i.
1349 Set imm_added_to_rs1 even if the source and destination register
1352 * sparc-opc.c: Add some two operand forms of the wr instruction.
1354 Tue Jun 18 15:58:27 1996 Jeffrey A. Law <law@rtl.cygnus.com>
1356 * h8300-dis.c (bfd_h8_disassemble): Rename "hmode" argument
1359 * disassemble.c (disassembler): Handle H8/S.
1360 * h8300-dis.c (print_insn_h8300s): New function for H8/S.
1362 Tue Jun 18 18:06:50 1996 Ian Lance Taylor <ian@cygnus.com>
1364 * sparc-opc.c: Add beq/teq as aliases for be/te.
1366 * ppc-opc.c: Fix fcmpo opcode. From Sergei Steshenko
1367 <sergei@msil.sps.mot.com>.
1369 Tue Jun 18 15:08:54 1996 Klaus Kaempf <kkaempf@progis.de>
1371 * makefile.vms: New file.
1373 * alpha-dis.c (print_insn_alpha): Print lda ra,lit(rz) as mov.
1375 Mon Jun 10 18:50:38 1996 Ian Lance Taylor <ian@cygnus.com>
1377 * h8300-dis.c (bfd_h8_disassemble): Always print ABS8MEM with :8,
1380 Tue Jun 4 09:15:53 1996 Doug Evans <dje@canuck.cygnus.com>
1382 * i386-dis.c (OP_OFF): Call append_prefix.
1384 Thu May 23 15:18:23 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1386 * ppc-opc.c (instruction encoding macros): Add explicit casts to
1387 unsigned long to silence a warning from the Solaris PowerPC
1390 Thu Apr 25 19:33:32 1996 Doug Evans <dje@canuck.cygnus.com>
1392 * sparc-opc.c (sparc_opcodes): Add ultrasparc vis extensions.
1394 Mon Apr 22 17:12:35 1996 Doug Evans <dje@blues.cygnus.com>
1396 * sparc-dis.c (X_IMM,X_SIMM): New macros.
1398 (print_insn_sparc): Merge cases i,I,j together. New cases X,Y.
1399 * sparc-opc.c (sparc_opcodes): Use X for 5 bit shift constants,
1400 Y for 6 bit shift constants. Rewrite entries for crdcxt, cwrcxt,
1401 cpush, cpusha, cpull sparclet insns.
1403 Wed Apr 17 14:20:22 1996 Doug Evans <dje@canuck.cygnus.com>
1405 * sparc-dis.c (compute_arch_mask): Replace ANSI style def with K&R.
1407 Thu Apr 11 17:30:02 1996 Ian Lance Taylor <ian@cygnus.com>
1409 * sparc-opc.c: Set F_FBR on floating point branch instructions.
1410 Set F_FLOAT on other floating point instructions.
1412 Mon Apr 8 17:02:48 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1414 * ppc-opc.c (PPC860): Macro for 860/821 specific instructions and
1416 (powerpc_opcodes): Add 860/821 specific SPRs.
1418 Mon Apr 8 14:00:44 1996 Ian Lance Taylor <ian@cygnus.com>
1420 * configure.in: Permit --enable-shared to specify a list of
1421 directories. Set and substitute BFD_PICLIST.
1422 * configure: Rebuild.
1423 * Makefile.in (BFD_PICLIST): Rename from BFD_LIST. Change all
1424 uses. Set to @BFD_PICLIST@.
1426 Fri Apr 5 17:12:27 1996 Jeffrey A Law (law@cygnus.com)
1428 * h8300-dis.c (bfd_h8_disassemble): Use "bit" for L_3 immediates,
1429 not "abs", which may be needed for the absolute in something
1430 like btst #0,@10:8. Print L_3 immediates separately from other
1431 immediates. Change ABSMOV reference to ABS8MEM.
1433 Wed Apr 3 10:40:45 1996 Doug Evans <dje@canuck.cygnus.com>
1435 * sparc-dis.c (opcodes_initialized): Move inside print_insn_sparc.
1436 (current_arch_mask): New static global.
1437 (compute_arch_mask): New static function.
1438 (print_insn_sparc): Delete sparc_v9_p. New static local
1439 current_mach. Resort opcode table if current_mach changes.
1440 Generalize "insn not supported" test.
1441 (compare_opcodes): Prefer supported opcodes to nonsupported ones.
1442 Delete test for v9/!v9.
1443 * sparc-opc.c (MASK_*): Use SPARC_OPCODE_ARCH_MASK.
1445 (brfc): Split into CBR and FBR for coprocessor/fp branches.
1446 (brfcx): Renamed to FBRX.
1447 (condfc): Renamed to CONDFC. Pass v6notlet to CBR (standard
1448 coprocessor mnemonics are not supported on the sparclet).
1449 (condf): Renamed to CONDF.
1450 (SLCBCC2): Delete F_ALIAS flag.
1452 Sat Mar 30 21:45:59 1996 Doug Evans <dje@canuck.cygnus.com>
1454 * sparc-opc.c (sparc_opcodes): rd must be 0 for
1455 mov foo,{%y,%psr,%wim,%tbr}. Support mov foo,%asrX.
1457 Fri Mar 29 13:02:40 1996 Ian Lance Taylor <ian@cygnus.com>
1459 * Makefile.in (config.status): Depend upon BFD VERSION file, so
1460 that the shared library version number is set correctly.
1462 Tue Mar 26 15:47:14 1996 Ian Lance Taylor <ian@cygnus.com>
1464 * configure.in: Use AC_CHECK_TOOL to find ar and ranlib. From
1465 Miles Bader <miles@gnu.ai.mit.edu>.
1466 * configure: Rebuild.
1468 Sat Mar 16 13:04:07 1996 Fred Fish <fnf@cygnus.com>
1470 * z8kgen.c (internal, gas): Call xmalloc rather than unchecked
1473 Tue Mar 12 12:14:10 1996 Ian Lance Taylor <ian@cygnus.com>
1475 * configure: Rebuild with autoconf 2.8.
1477 Thu Mar 7 15:11:10 1996 Doug Evans <dje@charmed.cygnus.com>
1479 * sparc-dis.c (print_insn_sparc): Handle 'O' operand char like 'r'.
1480 * sparc-opc.c (sparc_opcodes): Use 'O' operand char for `neg reg'.
1482 Tue Mar 5 15:51:57 1996 Ian Lance Taylor <ian@cygnus.com>
1484 * configure.in: Don't set SHLIB or SHLINK to an empty string,
1485 since they appear as targets in Makefile.in.
1486 * configure: Rebuild.
1488 Mon Feb 26 13:03:40 1996 Stan Shebs <shebs@andros.cygnus.com>
1490 * mpw-make.sed: Edit out shared library support bits.
1492 Tue Feb 20 20:48:28 1996 Doug Evans <dje@charmed.cygnus.com>
1494 * sparc-opc.c (v8,v6notv9): Add MASK_SPARCLET.
1495 (sparc_opcode_archs): Add MASK_V8 to sparclet entry.
1496 (sparc_opcodes): Add sparclet insns.
1497 (sparclet_cpreg_table): New static local.
1498 (sparc_{encode,decode}_sparclet_cpreg): New functions.
1499 * sparc-dis.c (print_insn_sparc): Handle sparclet cpregs.
1501 Tue Feb 20 11:02:44 1996 Alan Modra <alan@mullet.Levels.UniSA.Edu.Au>
1503 * i386-dis.c (index16): New static variable.
1504 (putop): Print jecxz for 32 bit case, jcxz for 16 bit, not the
1506 (OP_indirE): Return result of OP_E.
1507 (OP_E): Check for 16 bit addressing mode, and disassemble
1508 correctly. Optimised 32 bit case a little. Don't print
1509 "(base,index,scale)" when sib specifies only an offset.
1511 Mon Feb 19 12:32:17 1996 Ian Lance Taylor <ian@cygnus.com>
1513 * configure.in: Set and substitute SHLIB_DEP.
1514 * configure: Rebuild.
1515 * Makefile.in (SHLIB_DEP): New variable.
1516 (LIBIBERTY_LISTS, BFD_LIST): New variables.
1517 (stamp-piclist): Depend upon LIBIBERTY_LISTS and BFD_LIST. If
1518 COMMON_SHLIB, add them to piclist with appropriate modifications.
1519 ($(SHLIB)): Depend upon $(SHLIB_DEP). Don't check COMMON_SHLIB
1520 here: just use piclist.
1522 Mon Feb 19 02:03:50 1996 Doug Evans <dje@charmed.cygnus.com>
1524 * sparc-dis.c (MASK_V9,V9_ONLY_P,V9_P): Define.
1525 (print_insn_sparc): Rewrite v9/not-v9 tests.
1526 (compare_opcodes): Likewise.
1527 * sparc-opc.c (MASK_<ARCH>): Define.
1528 (v6,v7,v8,sparclite,v9,v9a): Redefine.
1529 (sparclet,v6notv9): Define.
1530 (sparc_opcode_archs): Delete member `conflicts'. Add `supported'.
1531 (sparc_opcodes): Delete F_NOTV9, use v6notv9 instead.
1533 Thu Feb 15 14:45:05 1996 Ian Lance Taylor <ian@cygnus.com>
1535 * configure.in: Call AC_PROG_CC before configure.host.
1536 * configure: Rebuild.
1538 * Makefile.in (SONAME): Remove leading ../bfd/ from $(SHLIB).
1540 Wed Feb 14 19:01:27 1996 Alan Modra <alan@spri.levels.unisa.edu.au>
1542 * i386-dis.c (onebyte_has_modrm): New static array.
1543 (twobyte_has_modrm): New static array.
1544 (print_insn_i386): Only fetch the mod/reg/rm byte if it is needed.
1546 Tue Feb 13 15:15:01 1996 Ian Lance Taylor <ian@cygnus.com>
1548 * Makefile.in ($(SHLINK)): Check ts against $(SHLIB), not
1551 Mon Feb 12 16:26:06 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1553 * ppc-opc.c (PPC): Undef, so default defination on Windows NT
1556 Wed Feb 7 13:59:54 1996 Ian Lance Taylor <ian@cygnus.com>
1558 * m68k-opc.c (m68k_opcodes): The bkpt instruction is supported on
1559 m68010up, not just m68020up | cpu32.
1561 * Makefile.in (SONAME): New variable.
1562 ($(SHLINK)): Make a link to the transformed name, as well.
1563 (stamp-tshlink): New target.
1564 (install): Skip stamp-tshlink during install.
1566 Tue Feb 6 12:28:54 1996 Ian Lance Taylor <ian@cygnus.com>
1568 * configure.in: Call AC_ARG_PROGRAM.
1569 * configure: Rebuild.
1570 * Makefile.in (program_transform_name): New variable.
1571 (install): Transform library name before installing it.
1573 Mon Feb 5 16:14:42 1996 Ian Lance Taylor <ian@cygnus.com>
1575 * i960-dis.c (mem): Add HX dcinva instruction.
1577 Support for building as a shared library, based on patches from
1578 Alan Modra <alan@spri.levels.unisa.edu.au>:
1579 * configure.in: Add AC_ARG_ENABLE for shared and commonbfdlib.
1580 New substitutions: ALLLIBS, PICFLAG, SHLIB, SHLIB_CC,
1581 SHLIB_CFLAGS, COMMON_SHLIB, SHLINK.
1582 * configure: Rebuild.
1583 * Makefile.in (ALLLIBS): New variable.
1584 (PICFLAG, SHLIB, SHLIB_CC, SHLIB_CFLAGS): New variables.
1585 (COMMON_SHLIB, SHLINK): New variables.
1586 (.c.o): If PICFLAG is set, compile twice, once PIC, once normal.
1587 (STAGESTUFF): Remove variable.
1588 (all): Depend upon $(ALLLIBS) rather than $(TARGETLIB).
1589 (stamp-piclist, piclist): New targets.
1590 ($(SHLIB), $(SHLINK)): New targets.
1591 ($(OFILES)): Depend upon stamp-picdir.
1592 (disassemble.o): Build twice if PICFLAG is set.
1593 (MOSTLYCLEAN): Add pic/*.o.
1594 (clean): Remove $(SHLIB), $(SHLINK), piclist, and stamp-piclist.
1595 (distclean): Remove pic and stamp-picdir.
1596 (install): Install shared libraries.
1597 (stamp-picdir): New target.
1599 Fri Feb 2 17:15:25 1996 Doug Evans <dje@charmed.cygnus.com>
1601 * sparc-dis.c (print_insn_sparc): Delete DISASM_RAW_INSN support.
1602 Print unknown instruction as "unknown", rather than in hex.
1604 Tue Jan 30 14:06:08 1996 Ian Lance Taylor <ian@cygnus.com>
1606 * dis-buf.c: Include "sysdep.h" before "dis-asm.h".
1608 Thu Jan 25 20:24:07 1996 Doug Evans <dje@charmed.cygnus.com>
1610 * sparc-opc.c (sparc_opcode_archs): Mark v8/sparclite as conflicting.
1612 Thu Jan 25 11:56:49 1996 Ian Lance Taylor <ian@cygnus.com>
1614 * i386-dis.c (print_insn_i386): Only fetch the mod/reg/rm byte
1615 when necessary. From Ulrich Drepper
1616 <drepper@myware.rz.uni-karlsruhe.de>.
1618 Thu Jan 25 03:39:10 1996 Doug Evans <dje@charmed.cygnus.com>
1620 * sparc-dis.c (print_insn_sparc): NUMOPCODES replaced with
1621 sparc_num_opcodes. Update architecture enum values.
1622 * sparc-opc.c (sparc_opcode_archs): Replaces architecture_pname.
1623 (sparc_opcode_lookup_arch): New function.
1624 (sparc_num_opcodes): Renamed from bfd_sparc_num_opcodes.
1625 (sparc_opcodes): Add v9a shutdown insn.
1627 Mon Jan 22 08:29:59 1996 Doug Evans <dje@charmed.cygnus.com>
1629 * sparc-dis.c (print_insn_sparc): Renamed from print_insn.
1630 If DISASM_RAW_INSN, print insn in hex. Handle v9a as opcode
1632 (print_insn_sparc64): Deleted.
1633 * disassemble.c (disassembler, case bfd_arch_sparc): Always use
1636 * sparc-opc.c (architecture_pname): Add v9a.
1638 Fri Jan 12 14:35:58 1996 David Mosberger-Tang <davidm@AZStarNet.com>
1640 * alpha-opc.h (alpha_insn_set): VAX floating point opcode was
1641 incorrectly defined as 0x16 when it should be 0x15.
1642 (FLOAT_FORMAT_MASK): function code is 11 bits, not just 7 bits!
1643 (alpha_insn_set): added cvtst and cvttq float ops. Also added
1644 excb (exception barrier) which is defined in the Alpha
1645 Architecture Handbook version 2.
1646 * alpha-dis.c (print_insn_alpha): Fixed special-case decoding for
1647 OPERATE_FORMAT_CODE type instructions. The bug caused mulq to be
1648 disassembled as or, for example.
1650 Wed Jan 10 12:37:22 1996 Ian Lance Taylor <ian@cygnus.com>
1652 * mips-dis.c (print_insn_arg): Print cases 'i' and 'u' in hex.
1653 (_print_insn_mips): Change i from int to unsigned int.
1655 Thu Jan 4 17:21:10 1996 David Edelsohn <edelsohn@mhpcc.edu>
1657 * ppc-opc.c (powerpc_opcodes): tlbi POWER opcode form different
1658 from tlbie PowerPC opcode. Add PPC603 tlbld and tlbli.
1660 Thu Dec 28 13:29:19 1995 John Hassey <hassey@rtp.dg.com>
1662 * i386-dis.c: Added Pentium Pro instructions.
1664 Tue Dec 19 22:56:35 1995 Michael Meissner <meissner@tiktok.cygnus.com>
1666 * ppc-opc.c (fsqrt{,.}): Duplicate for PowerPC in addition to
1669 Fri Dec 15 14:14:15 1995 J.T. Conklin <jtc@rtl.cygnus.com>
1671 * sh-opc.h (sh_nibble_type): Added REG_B.
1672 (sh_arg_type): Added A_REG_B.
1673 (sh_table): Added pref and bank reg versions of ldc, ldc.l, stc
1675 * sh-dis.c (print_insn_shx): Added cases for REG_B and A_REG_B.
1677 Fri Dec 15 16:44:31 1995 Ian Lance Taylor <ian@cygnus.com>
1679 * disassemble.c (disassembler): Use new bfd_big_endian macro.
1681 Tue Dec 12 12:22:24 1995 Ian Lance Taylor <ian@cygnus.com>
1683 * Makefile.in (distclean): Remove stamp-h. From Ronald
1684 F. Guilmette <rfg@monkeys.com>.
1686 Tue Dec 5 13:42:44 1995 Stan Shebs <shebs@andros.cygnus.com>
1688 From David Mosberger-Tang <davidm@azstarnet.com>:
1689 * alpha-dis.c (print_insn_alpha): fixed decoding of cpys
1692 Mon Dec 4 12:29:05 1995 J.T. Conklin <jtc@rtl.cygnus.com>
1694 * sh-opc.h (sh_arg_type): Added A_SSR and A_SPC.
1695 (sh_table): Added many SH3 opcodes.
1696 * sh-dis.c (print_insn_shx): Added cases for A_SSR and A_SPC.
1698 Fri Dec 1 07:42:18 1995 Michael Meissner <meissner@tiktok.cygnus.com>
1700 * ppc-opc.c (subfc., subfco): Mark this PPCCOM, not PPC.
1701 (subco,subco.): Mark this PPC, not PPCCOM.
1703 Mon Nov 27 13:09:52 1995 Ian Lance Taylor <ian@cygnus.com>
1705 * configure: Rebuild with autoconf 2.7.
1707 Tue Nov 21 18:28:06 1995 Ian Lance Taylor <ian@cygnus.com>
1709 * configure: Rebuild with autoconf 2.6.
1711 Wed Nov 15 19:02:53 1995 Ken Raeburn <raeburn@cygnus.com>
1713 * configure.in: Sort list of architectures. Accept but do nothing
1714 for alliant, convex, pyramid, romp, and tahoe.
1716 Wed Nov 8 20:18:59 1995 Ian Lance Taylor <ian@cygnus.com>
1718 * a29k-dis.c (print_special): Change num to unsigned int.
1720 Wed Nov 8 20:10:35 1995 Eric Freudenthal <freudenthal@nyu.edu>
1722 * a29k-dis.c (print_insn): Cast insn24 to unsigned long when
1725 Tue Nov 7 15:21:06 1995 Ian Lance Taylor <ian@cygnus.com>
1727 * configure.in: Call AC_CHECK_PROG to find and cache AR.
1728 * configure: Rebuilt.
1730 Mon Nov 6 17:39:47 1995 Harry Dolan <dolan@ssd.intel.com>
1732 * configure.in: Add case for bfd_i860_arch.
1733 * configure: Rebuild.
1735 Fri Nov 3 12:45:31 1995 Ian Lance Taylor <ian@cygnus.com>
1737 * m68k-opc.c (m68k_opcodes): Correct fmoveml operands.
1738 * m68k-dis.c (NEXTSINGLE): Change i to unsigned int.
1739 (NEXTDOUBLE): Likewise.
1740 (print_insn_m68k): Don't match fmoveml if there is more than one
1741 register in the list.
1742 (print_insn_arg): Handle a place of '8' for a type of 'L'.
1744 Thu Nov 2 23:06:33 1995 Ian Lance Taylor <ian@cygnus.com>
1746 * m68k-opc.c: Use #W rather than #w.
1747 * m68k-dis.c (print_insn_arg): Handle new 'W' place.
1749 Wed Nov 1 13:30:24 1995 Ian Lance Taylor <ian@cygnus.com>
1751 * m68k-opc.c (m68k_opcode_aliases): Add dbfw as an alias for dbf,
1752 and likewise for all the dbxx opcodes.
1754 Mon Oct 30 20:50:40 1995 Fred Fish <fnf@cygnus.com>
1756 * arc-dis.c: Include elf-bfd.h rather than libelf.h.
1758 Mon Oct 23 11:11:34 1995 James G. Smith <jsmith@pasanda.cygnus.co.uk>
1760 * mips-opc.c: Added shorthand (V1) for INSN_4100 manifest. Added
1761 the VR4100 specific instructions to the mips_opcodes structure.
1763 Thu Oct 19 11:05:23 1995 Stan Shebs <shebs@andros.cygnus.com>
1765 * mpw-config.in, mpw-make.sed: Remove ugly workaround for
1766 ugly Metrowerks bug in CW6, is fixed in CW7.
1768 Mon Oct 16 12:59:01 1995 Michael Meissner <meissner@tiktok.cygnus.com>
1770 * ppc-opc.c (whole file): Add flags for common/any support.
1772 Tue Oct 10 11:06:07 1995 Fred Fish <fnf@cygnus.com>
1774 * Makefile.in (BISON): Remove macro.
1775 (FLAGS_TO_PASS): Remove BISON.
1777 Fri Oct 6 16:26:45 1995 Ken Raeburn <raeburn@cygnus.com>
1779 Mon Sep 25 22:49:32 1995 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1781 * m68k-dis.c (print_insn_m68k): Recognize all two-word
1782 instructions that take no args by looking at the match mask.
1783 (print_insn_arg): Always print "%" before register names.
1784 [case 'c']: Use "nc" for the no-cache case, as recognized by gas.
1785 [case '_']: Don't print "@#" before address.
1786 [case 'J']: Use "%s" as format string, not register name.
1787 [case 'B']: Treat place == 'C' like 'l' and 'L'.
1789 Thu Oct 5 22:16:20 1995 Ken Raeburn <raeburn@cygnus.com>
1791 * i386-dis.c: Describe cmpxchg8b operand, and spell the opcode
1794 Tue Oct 3 08:30:20 1995 steve chamberlain <sac@slash.cygnus.com>
1796 From David Mosberger-Tang <davidm@azstarnet.com>
1798 * alpha-opc.h (MEMORY_FUNCTION_FORMAT_MASK): added.
1799 (alpha_insn_set): added definitions for VAX floating point
1800 instructions (Unix compilers don't generate these, but handcoded
1801 assembly might still use them).
1803 * alpha-dis.c (print_insn_alpha): added support for disassembling
1804 the miscellaneous instructions in the Alpha instruction set.
1806 Tue Sep 26 18:47:20 1995 Stan Shebs <shebs@andros.cygnus.com>
1808 * mpw-config.in: Add m68k-opc.c.o to BFD_MACHINES for m68k,
1809 no longer create sysdep.h, sed ppc-opc.c to work around a
1810 serious Metrowerks C bug.
1811 * mpw-make.in: Remove.
1812 * mpw-make.sed: New file, used by mpw-configure to edit
1813 Makefile.in into an MPW makefile.
1815 Wed Sep 20 12:55:28 1995 Ian Lance Taylor <ian@cygnus.com>
1817 * Makefile.in (maintainer-clean): New synonym for realclean.
1819 Tue Sep 19 15:28:36 1995 Ian Lance Taylor <ian@cygnus.com>
1821 * m68k-opc.c: Split pmove patterns which use 'P' into patterns
1822 which use '0', '1', and '2' instead. Specify the proper size for
1823 a pmove immediate operand. Correct the pmovefd patterns to be
1824 moves to a register, not from a register.
1825 * m68k-dis.c (print_insn_arg): Replace 'P' with '0', '1', '2'.
1827 Thu Sep 14 11:58:22 1995 Doug Evans <dje@canuck.cygnus.com>
1829 * sparc-opc.c (sparc_opcodes): Mark all insns that reference
1830 %psr, %wim, %tbr as F_NOTV9.
1832 Fri Sep 8 01:07:38 1995 Ian Lance Taylor <ian@cygnus.com>
1834 * Makefile.in (Makefile): Just rebuild Makefile when running
1836 (config.h, stamp-h): New targets.
1837 * configure.in: Call AC_CONFIG_HEADER and AC_CANONICAL_SYSTEM
1838 earlier. Don't bother to call AC_ARG_PROGRAM. Touch stamp-h when
1839 rebuilding config.h.
1840 * configure: Rebuild.
1842 * mips-opc.c: Change unaligned loads and stores with "t,A"
1843 operands to use "t,A(b)".
1845 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
1847 * sh-dis.c (print_insn_shx): Add F_FR0 support.
1849 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
1851 * sh-dis.c (print_insn_shx): Change loop over op->arg[n] to iterate
1852 until 3 instead of until 2.
1854 Wed Sep 6 21:21:33 1995 Ian Lance Taylor <ian@cygnus.com>
1856 * Makefile.in (ALL_CFLAGS): Define.
1857 (.c.o, disassemble.o): Use $(ALL_CFLAGS).
1858 (MOSTLYCLEAN): Add config.log.
1859 (distclean): Don't remove config.log.
1860 * configure.in: Substitute HDEFINES.
1861 * configure: Rebuild.
1863 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
1865 * sh-opc.h (sh_arg_type): Add F_FR0.
1866 (sh_table, case fmac): Add F_FR0 as first argument.
1868 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
1870 * sh-opc.h (sh_opcode_info): Increase arg array size to 4.
1872 Tue Sep 5 18:28:10 1995 Doug Evans <dje@canuck.cygnus.com>
1874 * sparc-dis.c: Remove all references to NO_V9.
1876 Tue Sep 5 20:03:26 1995 Ian Lance Taylor <ian@cygnus.com>
1878 * aclocal.m4: Just include ../bfd/aclocal.m4.
1879 * configure: Rebuild.
1881 Tue Sep 5 16:09:59 1995 Doug Evans <dje@canuck.cygnus.com>
1883 * sparc-dis.c (X_DISP19): Define.
1884 (print_insn, case 'G'): Use it.
1885 (print_insn, case 'L'): Sign extend displacement.
1887 Mon Sep 4 14:28:46 1995 Ian Lance Taylor <ian@cygnus.com>
1889 * configure.in: Run ../bfd/configure.host before AC_PROG_CC.
1890 Subsitute CFLAGS and AR. Call AC_PROG_INSTALL. Don't substitute
1891 host_makefile_frag or frags.
1892 * aclocal.m4: New file.
1893 * configure: Rebuild.
1894 * Makefile.in (INSTALL): Set to @INSTALL@.
1895 (INSTALL_PROGRAM): Set to @INSTALL_PROGRAM@.
1896 (INSTALL_DATA): Set to @INSTALL_DATA@.
1898 (AR_FLAGS): Set to rc rather than qc.
1899 (CC): Define as @CC@.
1900 (CFLAGS): Set to @CFLAGS@.
1901 (@host_makefile_frag@): Remove.
1902 (config.status): Remove dependency upon @frags@.
1904 * configure.in: ../bfd/config.bfd now just sets shell variables.
1905 Use them rather than looking through target Makefile fragments.
1906 * configure: Rebuild.
1908 Thu Aug 31 12:35:32 1995 Jim Wilson <wilson@chestnut.cygnus.com>
1910 * sh-opc.h (ftrc): Change FPUL_N to FPUL_M.
1912 Wed Aug 30 13:52:28 1995 Doug Evans <dje@canuck.cygnus.com>
1914 * sparc-opc.c (sparc_opcodes): Delete duplicate wr %y insn.
1915 Add clrx, iprefetch, signx, clruw, cas, casl, casx, casxl synthetic
1918 * sparc-opc.c (sparc_opcodes): Fix prefetcha insn.
1919 (lookup_{name,value}): New functions.
1920 (prefetch_table): New static local.
1921 (sparc_{encode,decode}_prefetch): New functions.
1922 * sparc-dis.c (print_insn): Handle '*' arg (prefetch function).
1924 Wed Aug 30 11:11:58 1995 Jim Wilson <wilson@chestnut.cygnus.com>
1926 * sh-opc.h: Add blank lines to improve readabililty of sh3e
1929 Wed Aug 30 11:09:38 1995 Jim Wilson <wilson@chestnut.cygnus.com>
1931 * sh-dis.c: Correct comment on first line of file.
1933 Tue Aug 29 15:37:18 1995 Doug Evans <dje@canuck.cygnus.com>
1935 * disassemble.c (disassembler): Handle bfd_mach_sparc64.
1937 * sparc-opc.c (asi, membar): New static locals.
1938 (sparc_{encode,decode}_{asi,membar}): New functions.
1939 (sparc_opcodes, membar insn): Fix.
1940 * sparc-dis.c (print_insn): Call sparc_decode_asi.
1941 Support decoding of membar masks.
1944 Sat Aug 26 21:22:48 1995 Ian Lance Taylor <ian@cygnus.com>
1946 * m68k-opc.c (m68k_opcode_aliases): Add br, brs, brb, brw, brl.
1948 Mon Aug 21 17:33:36 1995 Ian Lance Taylor <ian@cygnus.com>
1950 * m68k-opc.c (m68k_opcode_aliases): Add bhib as an alias for bhis,
1951 and likewise for the other branches. Add bhs as an alias for bcc,
1952 and likewise for the size variants. Add dbhs as an alias for
1955 Fri Aug 11 13:40:24 1995 Jeff Law (law@snake.cs.utah.edu)
1957 * sh-opc.h (FP sts instructions): Update to match reality.
1959 Mon Aug 7 16:12:58 1995 Ian Lance Taylor <ian@cygnus.com>
1961 * m68k-dis.c: (fpcr_names): Add % before all register names.
1962 (reg_names): Likewise.
1963 (print_insn_arg): Don't explicitly print % before register names.
1964 Add % before register names in static array names. In case 'r',
1965 print data registers as `@(Dn)', not `Dn@'. When printing a
1966 memory address, don't print @# before it.
1967 (print_indexed): Change base_disp and outer_disp from int to
1968 bfd_vma. Print using MIT syntax, not mutant invalid Motorola
1969 syntax. Sign extend 8 byte displacement correctly.
1970 (print_base): Print using MIT syntax. Print zpc when appropriate.
1971 Change parameter disp from int to bfd_vma.
1973 * m68k-opc.c (m68k_opcode_aliases): Add jsrl and jsrs as aliases
1976 Mon Aug 7 02:21:40 1995 Jeff Law (law@snake.cs.utah.edu)
1978 * sh-dis.c (print_insn_shx): Handle new operand types F_REG_N,
1979 F_REG_M, FPSCR_M, FPSCR_N, FPUL_M and FPUL_N.
1980 * sh-opc.h (sh_arg_type): Add new operand types.
1981 (sh_table): Add new opcodes from SH3E Floating Point ISA.
1983 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
1985 * Makefile.in (distclean): Remove generated file config.h.
1987 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
1989 * Makefile.in (distclean): Remove generated file config.h.
1991 Wed Aug 2 18:33:40 1995 Ian Lance Taylor <ian@cygnus.com>
1993 * m68k-opc.c: New file, holding tables from include/opcode/m68k.h.
1995 * m68k-dis.c: Remove BREAK_UP_BIG_DECL stuff.
1997 (print_insn_m68k): Change d to be const. Use m68k_numopcodes
1998 rather than numopcodes. Use m68k_opcodes rather than removed
1999 opcode function. Don't check F_ALIAS.
2000 (print_insn_arg): Change first parameter to be const char *.
2001 * Makefile.in (ALL_MACHINES): Add m68k-opc.o.
2002 (m68k-opc.o): New target.
2003 * configure.in: Build m68k-opc.o for bfd_m68k_arch.
2004 * configure: Rebuild.
2006 Wed Aug 2 08:23:38 1995 Doug Evans <dje@canuck.cygnus.com>
2008 * sparc-dis.c (HASH_SIZE, HASH_INSN): Define.
2009 (opcode_bits, opcode_hash_table): New variables.
2010 (opcodes_initialized): Renamed from opcodes_sorted.
2011 (build_hash_table): New function.
2012 (is_delayed_branch): Use hash table.
2013 (print_insn): Renamed from print_insn_sparc, made static.
2014 Build and use hash table. If !sparc64, ignore sparc64 insns,
2015 and vice-versa if sparc64.
2016 (print_insn_sparc, print_insn_sparc64): New functions.
2017 (compare_opcodes): Move sparc64 opcodes to end.
2018 Print commutative insns with constant second.
2019 * sparc-opc.c (all non-v9 insns): Use flag F_NOTV9 instead of F_ALIAS.
2021 Tue Aug 1 00:12:49 1995 Ian Lance Taylor <ian@cygnus.com>
2023 * sh-dis.c (print_insn_shx): Remove unused local dslot. Use
2024 print_address_func for A_BDISP12 and A_BDISP8. Correct test which
2025 avoids printing a delay slot in a delay slot.
2026 * sh-opc.h (sh_table): Fully bracket last entry.
2028 Mon Jul 31 12:04:47 1995 Doug Evans <dje@canuck.cygnus.com>
2030 * sparc-opc.c (sllx, srax, srlx): Fix disassembly.
2032 Wed Jul 12 00:59:34 1995 Ken Raeburn <raeburn@kr-pc.cygnus.com>
2034 * configure.in: Get host_makefile_frag from ${srcdir}.
2036 * configure.in: Autoconfiscated. Check for string[s].h. Create
2037 config.h from config.in. Don't set up sysdep.h link.
2038 * sysdep.h: New file.
2039 * configure, config.in: New files, generated from configure.in.
2040 * Makefile.in: Updated to be processed autoconf-style.
2041 (distclean): Keep sysdep.h. Remove config.log and config.cache.
2042 (Makefile): Depend on config.status.
2043 (config.status): New rule.
2044 * configure.bat: Update Makefile substitutions.
2046 Tue Jul 11 14:23:37 1995 Jeff Spiegel <jeffs@lsil.com>
2048 * mips-opc.c (L1): Define.
2049 (mips_opcodes): Add R4010 instructions: flushi, flushd, flushid,
2050 addciu, madd, maddu, ffc, ffs, msub, msubu, selsi, selsr, waiti,
2053 Tue Jul 11 11:49:49 1995 Ian Lance Taylor <ian@cygnus.com>
2055 * mips-opc.c (mips_opcodes): For the move pseudo-op, prefer daddu
2056 if ISA 3 and addu otherwise, replacing or, since some MIPS chips
2057 have multiple add units but only a single logical unit.
2059 * ppc-opc.c (powerpc_operands): Change CR to use a bitsize of 3,
2060 shifted by 18, without any insertion or extraction function.
2061 (insert_cr, extract_cr): Remove.
2064 Mon Jul 3 11:54:31 1995 Ian Lance Taylor <ian@cygnus.com>
2066 * Makefile.in (ALL_MACHINES): Add arc-dis.o and arc-opc.o.
2069 Wed Jun 21 20:05:39 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
2071 * m68k-dis.c (print_insn_arg, print_indexed): Print "%" before
2074 Thu Jun 15 17:23:31 1995 Stan Shebs <shebs@andros.cygnus.com>
2076 * mpw-config.in: Add sh and i386 configs, remove sparc config.
2077 * sh-opc.h: Add copyright.
2079 Mon Jun 5 03:30:43 1995 Ken Raeburn <raeburn@kr-laptop.cygnus.com>
2081 * Makefile.in (crunch-m68k): Delete extra target accidentally
2082 checked in a while ago.
2084 Wed May 24 16:22:13 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2086 * sh-opc.h (sh_table): Add SH3 support.
2088 Wed May 24 14:16:08 1995 Steve Chamberlain <sac@slash.cygnus.com>
2090 * sh-opc.h: Added bsrf and braf.
2092 Wed May 10 14:28:16 1995 Richard Earnshaw (rearnsha@armltd.co.uk)
2094 * arm-opc.h (arm_opcodes): Add 64-bit multiply patterns. Delete
2095 bogus [ls]fm{ea,fd} patterns.
2097 * arm-opc.h (arm_opcodes): Correct typos in stm, ldm, std, and ldc.
2098 * arm-dis.c (print_insn_arm): Make GIVEN a parameter, don't try and
2099 initialize it from memory. Make function static.
2100 (print_insn_{big,little}_arm): New functions.
2101 * disassemble.c (disassembler, case bfd_arch_arm): Disassemble for
2102 the correct endianness.
2105 Sat Apr 29 23:20:05 1995 Doug Evans <dje@chestnut.cygnus.com>
2107 * arc-opc.c (arc_opcodes): Add ARC_OPCODE_CONDITIONAL_BRANCH flag.
2108 (arc_suffixes): Use ARC_DELAY_{NONE,NORMAL,JUMP}.
2111 Mon Apr 24 14:18:05 1995 Jason Molenda (crash@phydeaux.cygnus.com>
2113 * sh-opc.h (sh_nibble_type, sh_arg_type): remove trailing , from
2116 Wed Apr 19 14:07:03 1995 Michael Meissner <meissner@tiktok.cygnus.com>
2118 * m68k-dis.c (opcode): Finish change made by Kung Hsu on April
2119 17th, so that it builds again using GCC as the compiler.
2121 Tue Apr 18 12:14:51 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
2123 * mips-dis.c (print_insn_little_mips): Cast return value from
2124 bfd_getl32 from bfd_vma to unsigned long, because _print_insn_mips
2125 expects an unsigned long, and that might be fewer words of
2126 argument storage (e.g., if bfd_vma is long long on a 32-bit
2128 (print_insn_big_mips): Likewise with bfd_getb32 value.
2129 (_print_insn_mips): Now static.
2131 Mon Apr 17 12:23:28 1995 Kung Hsu <kung@rtl.cygnus.com>
2133 * m68k-dis.c: Take out #define BREAK_UP_BIG_DECL kludge, because
2134 gcc memory hog problem with initializer is fixed.
2137 Wed Apr 12 09:04:12 1995 Doug Evans <dje@canuck.cygnus.com>
2139 * arc-opc.c (NULL): Define.
2140 (arc_operands, insn fields u,s): Delete.
2141 (arc_operands, insn fields a,b,c): Mark as signed.
2142 (arc_opcodes): No longer const, links computed at run-time.
2143 (arc_opcodes, mac/mul insns): Breakout suffixes as we don't handle
2144 suffixes that affect the insn code.
2145 (arc_opcodes): Resort table to macros are first.
2146 (arc_opcodes, ld [b,c] entry): Add %Q to prevent shimms.
2147 (arc_opcodes, st [b] entry): Likewise.
2148 (arc_opcodes, st [b,d] entry): Fix mask, value.
2149 (arc_reg_names): Add entries for r29, r30, r31, r60.
2150 (opcode_map, icode_map): New static globals.
2151 (arc_opcode_init_tables): Initialize them.
2152 (arc_opcode_lookup_asm, arc_opcode_lookup_dis): New functions.
2153 (insert_shimmoffset): Signal error if register present.
2155 * arc-dis.c (print_insn): Call arc_opcode_lookup_dis.
2158 Mon Apr 10 15:55:01 1995 Stan Shebs <shebs@andros.cygnus.com>
2160 Merge in support for Mac MPW as a host.
2161 (Old change descriptions retained for informational value.)
2163 * mpw-config.in (archname): Compute from the config.
2164 (BFD_MACHINES, ARCHDEFS): Put into mk.tmp.
2166 * mpw-config.in (target_arch): Compute from canonical target.
2167 (m68k, mips, powerpc, sparc): Add architectures.
2168 * mpw-make.in (disassemble.c.o): Add.
2169 (ALL_CFLAGS): Remove special flags (-mc68020 -mc68881 -model far).
2171 * mpw-config.in (BFD_MACHINES): Set to a default value.
2172 * mpw-make.in (BFD_MACHINES): Remove wired-in value.
2174 * mpw-make.in (CSEARCH): Add extra-include to search path.
2176 * mpw-config.in (varargs.h): Don't create.
2177 (sysdep.h): Create using forward-include.
2178 * mpw-make.in (CSEARCH): Add include/mpw to search path.
2180 * mpw-config.in: New file, MPW version of configure.in.
2181 * mpw-make.in: New file, MPW version of Makefile.in.
2184 Thu Apr 6 20:36:08 1995 Doug Evans <dje@chestnut.cygnus.com>
2186 * arc-dis.c (print_insn): New parameter `big_p'. Callers updated.
2187 Call arc_get_opcode_mach to map bfd mach number to opcode value.
2188 (print_insn_*): Pass bfd mach number, not opcode version.
2189 * arc-opc.c (arc_get_opcode_mach): New function.
2192 Fri Mar 31 14:23:38 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
2194 * alpha-dis.c (print_insn_alpha): Put empty statement after
2197 Tue Mar 21 10:51:40 1995 Jeff Law (law@snake.cs.utah.edu)
2199 * hppa-dis.c (sign_extend): Delete, redundant with libhppa.h version.
2200 (low_sign_extend): Likewise.
2201 (get_field): Delete unused function.
2202 (set_field, deposit_14, deposit_21): Likewise.
2204 Fri Mar 17 15:55:53 1995 J.T. Conklin <jtc@rtl.cygnus.com>
2206 * i386-dis.c: Support for more pentium opcodes. From Guy Harris
2209 Tue Mar 14 00:52:57 1995 Ken Raeburn (raeburn@kr-pc.cygnus.com)
2211 Sat Feb 11 17:22:41 1995 Klaus Kaempf (kkaempf@didymus.rmi.de)
2213 * alpha-opc.h (OSF_ASMCODE): define
2214 print pal-code names as defined in App C of the
2215 Alpha Architecture Reference Manual
2217 * alpha-dis.c: cleaned up output
2218 print stylized code forms as defined in App A.4.3 of the
2219 Alpha Architecture Reference Manual
2221 Wed Mar 8 15:21:14 1995 Ian Lance Taylor <ian@cygnus.com>
2223 * mips-opc.c: Add new mips4 instructions. Don't set INSN_RFE for
2225 * mips-dis.c (print_insn_arg): Handle new argument types 'h', 'R',
2228 Wed Mar 8 02:54:05 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
2230 * m68k-dis.c (opcode): New function. Returns address of opcode
2231 table entry given index, even if the opcode table was split to
2232 work around gcc bugs.
2233 (print_insn_m68k): Call opcode instead of referencing m68k_opcodes
2235 (BREAK_UP_BIG_DECL): Make secondary array static and const.
2236 (reg_names): Now const.
2237 (print_insn_arg): Arrays cacheFieldName and names now const.
2238 (print_indexed): Array scales now const.
2241 Tue Mar 7 21:14:14 1995 Doug Evans <dje@chestnut.cygnus.com>
2243 * arc-dis.c (print_insn_arc_base): Split into big and little fns.
2244 (print_insn_arc_{host,graphics,audio}): Likewise.
2245 (print_insn): Add prototype.
2246 (arc_get_disassembler): New arg `big_p'. Return little or big
2247 print fn accordingly.
2248 * arc-opc.c (arc_opcode_init_tables): Init arc_operand_map once.
2249 (arc_opcode_supported): Use ARC_OPCODE_CPU to ignore byte order.
2250 (arc_opval_supported): Likewise.
2251 * disassemble.c (disassembler): Pass big endian flag to
2252 arc_get_disassembler.
2255 Tue Mar 7 16:41:21 1995 Ian Lance Taylor <ian@cygnus.com>
2257 * ppc-opc.c: Sort recently added instructions by minor opcode
2258 number within major opcode number.
2260 Mon Mar 6 10:04:36 1995 Jeff Law (law@snake.cs.utah.edu)
2262 * hppa-dis.c: Include libhppa.h.
2264 Fri Feb 24 19:15:36 1995 Ian Lance Taylor <ian@cygnus.com>
2266 * mips-opc.c: Change dli to use M_DLI, and add dla.
2268 Mon Feb 20 23:54:38 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2270 * Makefile.in (ALL_MACHINES): Add w65-dis.o.
2273 Fri Feb 17 12:42:25 1995 Doug Evans <dje@chestnut.cygnus.com>
2275 * arc-dis.c (arc_get_disassembler): Change argument to int,
2276 one of bfd_mach_arc_xxx. All callers updated.
2279 Thu Feb 16 17:34:41 1995 Ian Lance Taylor <ian@cygnus.com>
2281 * mips-opc.c: Add r4650 mul instruction.
2283 Wed Feb 15 15:45:20 1995 Ian Lance Taylor <ian@cygnus.com>
2285 * mips-opc.c: Add uld and usd macros for unaligned double load and
2288 Tue Feb 14 13:17:37 1995 Michael Meissner <meissner@tiktok.cygnus.com>
2290 * ppc-opc.c (powerpc_opcodes): Add 403GA opcodes rfci, dccci,
2291 mfdcr, mtdcr, icbt, iccci.
2294 Mon Feb 13 11:09:17 1995 Doug Evans <dje@canuck.cygnus.com>
2296 * arc-dis.c (print_insn): Handle ARC_OPERAND_ADDRESS.
2297 * arc-opc.c (arc_operands): New operand 'J' for jump addresses.
2298 ('L' operand): Mark as ARC_OPERAND_ADDRESS.
2299 (arc_opcodes, j insn): Use 'J' operand type, not 'L'.
2300 (arc_opcodes, ld/st insns): Fix address writeback operand letter.
2301 (insert_absaddr): New function.
2303 Thu Feb 9 19:19:23 1995 Doug Evans <dje@canuck.cygnus.com>
2305 * arc-dis.c (print_insn_arc): Rename to print_insn and make static.
2306 New argument `cpu', pass it to arc_opcode_init_tables.
2307 Document byte order dependencies. Ignore unsupported insns.
2308 (arc_get_disassembler): New function.
2309 (print_insn_arc_base, print_insn_arc_host, print_insn_arc_graphics,
2310 print_insn_arc_audio): New functions.
2311 * arc-opc.c (MULTSHIFT operand): Delete.
2312 (UNSIGNED, SATURATION): New operands.
2313 (mac, mul, mul64, mulu64): New insns.
2314 (ext. asl, asr, lsr, ror): Only available on host and graphics cpus.
2315 (padc, padd, pmov, pand, psbc, psub, swap): New insns.
2316 (host,graphics,audio extended and auxiliary regs): Define.
2317 (ss, sc, mh, ml): New suffixes.
2318 (arc_opcode_supported, arc_opval_supported): New functions.
2319 (insert_multshift, extract_multshift): Deleted.
2320 * disassemble.c (disassembler, case bfd_arch_arc): Call
2321 arc_get_disassembler to get disassembler routine.
2324 Thu Feb 9 12:28:13 1995 Stan Shebs <shebs@andros.cygnus.com>
2326 * i960-dis.c (struct tabent, struct sparse_tabent): Change the
2327 signed char fields to shorts, more portable.
2329 Wed Feb 8 17:29:29 1995 Stan Shebs <shebs@andros.cygnus.com>
2331 * i960-dis.c (struct tabent, struct sparse_tabent): Declare the
2332 char fields as signed chars, since they may have negative values.
2334 Mon Feb 6 10:52:06 1995 J.T. Conklin <jtc@rtl.cygnus.com>
2336 * i386-dis.c (dis386_twobyte): Add cpuid, From Charles Hannum
2337 (mycroft@netbsd.org).
2339 Mon Jan 30 12:38:00 1995 Ian Lance Taylor <ian@cygnus.com>
2341 From "Logg, Ed" <elogg@ea.com>:
2342 * ppc-opc.c (extract_bdm): Correct parenthezisation.
2343 * ppc-dis.c (print_insn_powerpc): Print .long before unrecognized
2346 Thu Jan 26 18:32:08 1995 Ian Lance Taylor <ian@cygnus.com>
2348 * ppc-opc.c: Changes based on patch from David Edelsohn
2349 <edelsohn@mhpcc.edu>.
2350 (powerpc_operands): Add operands SPRBAT and SPRG. Split TBR out of
2353 (insert_tbr): New static function.
2354 (extract_tbr): New static function.
2355 (XFXFXM_MASK, XFXM): Define.
2356 (XSPRBAT_MASK, XSPRG_MASK): Define.
2357 (powerpc_opcodes): Add instructions to access special registers by
2358 name. Add mtcr and mftbu.
2360 Tue Jan 17 10:56:43 1995 Ian Lance Taylor <ian@sanguine.cygnus.com>
2362 * mips-opc.c (P3): Define.
2363 (mips_opcodes): Add mad and madu.
2365 Sun Jan 15 16:32:59 1995 Steve Chamberlain <sac@splat>
2367 * configure.in: Add W65 support.
2368 * disassemble.c: Likewise.
2369 * w65-opc.h, w65-dis.c: New files.
2371 Wed Dec 28 22:15:33 1994 Steve Chamberlain (sac@jonny.cygnus.com)
2373 * h8300-dis.c (bfd_h8_disassemble): Add support for 2 bit
2377 Tue Dec 20 10:36:55 1994 Doug Evans <dje@canuck.cygnus.com>
2379 * arc-dis.c (print_insn_arc): Branch offsets are relative to delay
2381 * arc-opc.c (extract_reladdr): New function.
2382 (insert_reladdr): Store address right-shifted by 2.
2385 Tue Dec 20 11:25:12 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2387 * mips-opc.c: Add dli as a synonym for li.
2390 Mon Dec 19 12:35:51 1994 Doug Evans <dje@canuck.cygnus.com>
2392 * arc-opc.c (insertion fns): Pass pointer to value's table entry.
2394 (extraction fns): Insn argument now array of two words. Return pointer
2395 to value's table entry. All uses changed.
2396 (arc_opcode_lookup_suffix): Exported for arc-dis.c.
2397 (insert_multshift, extract_multshift): New fns.
2398 (arc_operands): Add support for cache bypass suffix. Add support for
2399 predefined aux regs. Modifier bits moved to flags field.
2400 (arc_opcodes): Likewise.
2401 Add mul/mulu/shift insns. Syntax of zero/sign extension insns changed.
2402 New insn rlc. Update to syntax in programmer's manual.
2403 (arc_reg_names): Fix typo in lp_count. Add predefined aux regs.
2404 (arc_suffixes): New synonyms lo,hs for cs,cc. New suffix for cache
2406 (arc_opcode_init_tables): New argument to indicate cpu type.
2407 (insert_reg): Handle predefined aux regs.
2408 (extract_reg): Likewise.
2409 (lookup_register): New fn.
2410 * arc-dis.c (arc_condition_codes): Deleted.
2411 (print_insn_arc): Handle insns with 32 bit immediate constants better.
2412 Clean up modifier handling. Handle predefined aux regs.
2415 Thu Dec 8 18:23:31 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
2417 * alpha-dis.c (print_insn_alpha): Handle call_pal instruction, and
2418 print something for reserved opcode values, even if it won't
2421 * mips-dis.c (_print_insn_mips): When initializing, shift right
2422 and mask, to avoid sign extension problems on the Alpha.
2424 * m68k-dis.c (print_insn_arg, case 'J'): Handle buscr and pcr
2428 Tue Nov 29 18:02:43 1994 Doug Evans <dje@canuck.cygnus.com>
2430 * configure.in: Add ARC support.
2431 * disassemble.c: Likewise.
2432 * arc-dis.c, arc-opc.c: New files.
2435 Wed Nov 23 22:34:51 1994 Steve Chamberlain (sac@jonny.cygnus.com)
2437 * sh-opc.h (mov.l gbr): Get direction right.
2438 * sh-dis.c (print_insn_shx): New function.
2439 (print_insn_shl, print_insn_sh): Call print_insn_shx to
2440 print opcodes with right byte order.
2442 Thu Nov 3 19:32:22 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
2444 * ns32k-dis.c (struct ns32k_option): Renamed from struct option,
2445 to avoid conflicts with getopt.
2447 Mon Oct 31 18:48:10 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2449 * hppa-dis.c (print_insn_hppa): Read the instruction using
2450 bfd_getb32, so that it works on a little endian or 64 bit host.
2451 Remove unused local variable op.
2453 Tue Oct 25 17:07:57 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2455 * mips-opc.c: Use or instead of addu for pseudo-op move, since
2456 addu does not work correctly if -mips3.
2458 Wed Oct 19 13:40:16 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2460 * a29k-dis.c (print_special): Add special register names defined
2461 on 29030, 29040 and 29050.
2462 (print_insn): Handle new operand type 'I'.
2464 Wed Oct 12 11:59:55 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2466 * Makefile.in (INSTALL): Use top level install.sh script.
2468 Wed Oct 5 19:16:29 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2470 * sparc-dis.c: Rewrite to use bitfields, rather than a union, so
2471 that it works on a little endian host.
2473 Tue Oct 4 12:14:21 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2475 * configure.in: Use ${config_shell} when running config.bfd.
2477 Wed Sep 21 18:49:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
2479 * mips-opc.c (mips_opcodes): "dabs" is only available with -mips3.
2481 Thu Sep 15 16:30:22 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
2483 * a29k-dis.c (print_insn): Print the opcode.
2485 Wed Sep 14 17:52:14 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
2487 * mips-opc.c (mips_opcodes): Set WR_t for sc and scd.
2489 Sun Sep 11 22:32:17 1994 Jeff Law (law@snake.cs.utah.edu)
2491 * hppa-dis.c (reg_names): Use r26-r23 for arg0-arg3.
2493 Tue Sep 6 11:37:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
2495 * mips-opc.c: Set INSN_STORE_MEMORY flag for all instructions
2496 which store a value into memory.
2498 Sun Sep 04 17:58:10 1994 Richard Earnshaw (rwe@pegasus.esprit.ec.org)
2500 * configure.in, Makefile.in, disassemble.c: Add support for the ARM.
2501 * arm-dis.c, arm-opc.h: New files.
2503 Fri Aug 5 14:00:05 1994 Stan Shebs (shebs@andros.cygnus.com)
2505 * Makefile.in (ns32k-dis.o): Add dependency.
2506 * ns32k-dis.c (print_insn_arg): Declare initialized local as
2507 string, not as array of chars.
2509 Thu Jul 28 18:14:16 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
2511 * sparc-dis.c (print_insn_sparc): Handle new operand type 'x'.
2513 * sparc-opc.c: Added sparclite extended FP operations, and
2514 versions of v9 impdep* instructions permitting specification of
2517 Tue Jul 26 16:36:03 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
2519 * i960-dis.c (reg_names): Now const.
2520 (struct sparse_tabent): New type, copied from array type in mem
2522 (ctrl): Local static array ctrl_tab now const.
2523 (cobr): Local static array cobr_tab now const.
2524 (mem): Local variables reg1, reg2, reg3 now point to const. Local
2525 static variable mem_tab no longer explicitly initialized. Changed
2526 mem_init to const array of struct sparse_tabent.
2527 (reg): Local static variable reg_tab no longer explicitly
2528 initialized. Changed reg_init to const array of struct
2530 (ea): Local static array scale_tab now const.
2532 * i960-dis.c (reg): Added i960JX instructions to reg_init table.
2535 Tue Jul 19 21:00:00 1994 DJ Delorie (dj@ctron.com)
2537 * configure.bat: the disassember needs to be enabled for
2538 "objdump -d" to work in djgpp.
2540 Wed Jul 13 18:01:58 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
2542 * ns32k-dis.c: Deleted all code in "#ifdef GDB".
2543 (invalid_float): Enabled general version, doesn't require running
2544 on ns32k host. Changed to take char* argument, and test for
2545 explicitly specified sizes, instead of using sizeof() on host CPU
2547 (INVALID_FLOAT): Cast first argument.
2548 (opt_u, opt_U, opt_O, opt_C, opt_S, list_P532, list_M532,
2549 list_P032, list_M032): Now const.
2550 (optlist, list_search): Made appropriate arguments now point to
2552 (print_insn_arg): Changed static array of one-character-string
2553 pointers into a static const array of characters; fixed sprintf
2554 statement accordingly.
2556 Sun Jul 10 00:27:47 1994 Ian Dall (dall@hfrd.dsto.gov.au)
2558 * opcodes/ns32k-dis.c: Semi-new file. Had apparently been dropped
2559 from distribution. A ns32k-dis.c from a previous distribution has
2560 been brought up to date and supports the new interface.
2562 * disassemble.c: define ARCH_ns32k and add case bfd_arch_ns32k.
2564 * configure.in: add bfd_ns32k_arch target support.
2566 * Makefile.in: add ns32k-dis.o to ALL_MACHINES.
2567 Add ns32k-dis.c to CFILES. Add dependencies for ns32k-dis.o.
2569 Wed Jun 29 22:10:37 1994 Steve Chamberlain (sac@cygnus.com)
2571 * h8300-dis.c (bfd_h8_disassemble): Get 16bit branch
2574 Tue Jun 28 13:22:06 1994 Stan Shebs (shebs@andros.cygnus.com)
2576 * h8300-dis.c, mips-dis.c: Don't use true and false.
2578 Thu Jun 23 12:53:19 1994 David J. Mackenzie (djm@rtl.cygnus.com)
2580 * configure.in: Change --with-targets to --enable-targets.
2582 Wed Jun 22 13:38:32 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
2584 * mips-dis.c (_print_insn_mips): Build a static hash table mapping
2585 opcodes to the first instruction with that opcode, to speed
2586 disassembly of large files. From ralphc@pyramid.com (Ralph
2589 Tue Jun 7 12:49:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2591 * Makefile.in (mostlyclean): Fix typo (was mostyclean).
2593 Wed May 11 22:32:00 1994 DJ Delorie (dj@ctron.com)
2595 * configure.bat: update to latest makefile.in
2597 Sat May 7 17:13:21 1994 Steve Chamberlain (sac@cygnus.com)
2599 * a29k-dis.c (print_insn): Print 'x' type operand in hex.
2600 * h8300-dis.c (bfd_h8_disassemble): Print 16bit rels correctly.
2601 * sh-dis.c (print_insn_sh): Don't recur endlessly if delay
2602 slot insn is in a delay slot.
2603 * z8k-opc.h: (resflg): Fix patterns.
2604 * h8500-opc.h Fix CR insn patterns.
2606 Fri May 6 14:34:46 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2608 * ppc-opc.c (powerpc_opcodes): Put PowerPC versions of "cmp" and
2609 "cmpl" before POWER versions, so that gas -many uses them.
2611 Thu Apr 28 18:32:36 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
2613 * disassemble.c: New file.
2614 * Makefile.in (OFILES): Add disassemble.o.
2615 (disassemble.o): Provide dependencies; compile with $(ARCHDEFS).
2616 * configure.in: Define ARCHDEFS in Makefile. Code taken from
2617 binutils/configure.in.
2619 * m68k-dis.c (print_insn_m68k): If F_ALIAS flag is set, skip the
2620 opcode being examined.
2622 Thu Apr 21 17:08:40 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2624 * ppc-opc.c (powerpc_operands): Added RAL, RAM and RAS.
2625 (insert_ral, insert_ram, insert_ras): New functions.
2626 (powerpc_opcodes): Use RAL for load with update, RAM for lmw, and
2627 RAS for store with update.
2629 Sat Apr 16 23:41:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2631 * ppc-opc.c (powerpc_opcodes): Correct fcir. From David Edelsohn
2632 (edelsohn@npac.syr.edu).
2634 Wed Apr 6 17:11:45 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2636 * mips-opc.c (mips_opcodes): Correct operands of "nor" with an
2639 Mon Apr 4 16:30:46 1994 Doug Evans (dje@canuck.cygnus.com)
2641 * sparc-opc.c (sparc_opcodes): Fix "rd %fprs,%l0".
2643 Mon Apr 4 13:22:00 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2645 * ppc-opc.c (powerpc_operands): The signedp field has been
2646 removed, so don't initialize it. Set the PPC_OPERAND_SIGNED flag
2647 instead. Add new operand SISIGNOPT.
2648 (powerpc_opcodes): For lis, liu, addis, and cau use SISIGNOPT.
2649 Based on patch from David Edelsohn (edelsohn@npac.syr.edu).
2650 * ppc-dis.c (print_insn_powerpc): Check PPC_OPERAND_SIGNED rather
2653 Wed Mar 30 00:31:49 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2655 * i386-dis.c (struct private): Renamed to dis_private. `private'
2656 is a reserved word for dynix cc.
2658 Mon Mar 28 13:00:15 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2660 * configure.in: Change error message to refer to bfd/config.bfd
2661 rather than bfd/configure.in.
2663 Mon Mar 28 12:28:30 1994 David Edelsohn (edelsohn@npac.syr.edu)
2665 * ppc-opc.c: Define POWER2 as short alias flag.
2666 (powerpc_opcodes): Add POWER/2 opcodes lfq*, stfq*, fcir[z], and
2669 Wed Mar 23 12:23:05 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2671 * i960-dis.c (print_insn_i960): Don't read a second word for
2672 opcodes 0, 1, 2 and 3.
2674 Wed Mar 16 15:37:58 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2676 * configure.in: Don't build m68881-ext.o for bfd_m68k_arch.
2678 Mon Mar 14 14:53:50 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2680 * m68881-ext.c: Removed; no longer used.
2681 * Makefile.in: Changed accordingly.
2683 * m68k-dis.c (ext_format_68881): Don't declare.
2684 (print_insn_m68k): If an instruction uses place 'i', it uses at
2685 least four fixed bytes.
2686 (print_insn_arg): Don't bump p by 2 for case 'I', place 'i'. For
2687 extended float, convert to double using floatformat_to_double, not
2688 ieee_extended_to_double, and fetch the data before converting it.
2690 Tue Mar 8 18:12:25 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2692 * mips-opc.c: It's sqrt.s, not sqrt.w. From
2693 davidj@ICSI.Berkeley.EDU (David Johnson).
2695 Tue Feb 8 16:55:27 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2697 * ppc-opc.c (powerpc_opcodes): The POWER uses bdn[l][a] where the
2698 PowerPC uses bdnz[l][a].
2700 Tue Feb 8 00:32:28 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2702 * dis-buf.c, i386-dis.c: Include sysdep.h.
2704 Mon Feb 7 19:22:23 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2706 * configure.in (bfd_powerpc_arch): Use ppc-dis.o and ppc-opc.o.
2708 * ppc-opc.c (powerpc_opcodes): Mark POWER instructions supported
2709 by Motorola PowerPC 601 with PPC_OPCODE_601.
2710 * ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc):
2711 Disassemble Motorola PowerPC 601 instructions as well as normal
2712 PowerPC instructions.
2714 Sun Feb 6 07:45:17 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
2716 * i960-dis.c (reg, mem): Just use a static array instead of
2719 Sat Feb 5 00:04:02 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
2721 * hppa-dis.c (print_insn_hppa): For '?' and '@' only adjust the
2722 condition name index if this is for a negated condition.
2724 * hppa-dis.c (print_insn_hppa): No space before 'H' operand.
2725 Floating point format for 'H' operand is backwards from normal
2726 case (0 == double, 1 == single). For '4', '6', '7', '9', and '8'
2727 operands (fmpyadd and fmpysub), handle bizarre register
2728 translation correctly for single precision format.
2730 * hppa-dis.c (print_insn_hppa): Do not emit a space after 'F'
2731 or 'I' operands if the next format specifier is 'M' (fcmp
2732 condition completer).
2734 Feb 4 23:38:03 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2736 * ppc-opc.c (powerpc_operands): New operand type MBE to handle a
2737 single number giving a bitmask for the MB and ME fields of an M
2738 form instruction. Change NB to accept 32, and turn it into 0;
2739 also turn 0 into 32 when disassembling. Seperated SH from NB.
2740 (insert_mbe, extract_mbe): New functions.
2741 (insert_nb, extract_nb): New functions.
2742 (SC_MASK): Mask out SA and LK bits.
2743 (powerpc_opcodes): Change "cal" to use RT, D, RA rather than RT,
2744 RA, SI. Change "liu" and "cau" to use UI rather than SI. Mark
2745 "bctr" and "bctrl" as accepted by POWER. Change "rlwimi",
2746 "rlimi", "rlwimi.", "rlimi.", "rlwinm", "rlinm", "rlwinm.",
2747 "rlinm.", "rlmi", "rlmi.", "rlwnm", "rlnm", "rlwnm.", "rlnm." to
2748 use MBE rather than MB. Add "mfmq" and "mtmq" POWER instructions.
2749 (powerpc_macros): Define table of macro definitions.
2750 (powerpc_num_macros): Define.
2752 * ppc-dis.c (print_insn_powerpc): Don't skip optional operands
2753 if PPC_OPERAND_NEXT is set.
2755 Sat Jan 22 23:10:07 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2757 * i960-dis.c (print_insn_i960): Make buffer bfd_byte instead of
2758 char. Retrieve contents using bfd_getl32 instead of shifting.
2760 Fri Jan 21 19:01:39 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2762 * ppc-opc.c: New file. Opcode table for PowerPC, including
2763 opcodes for POWER (RS/6000).
2764 * ppc-dis.c: New file. PowerPC and Power (RS/6000) disassembler.
2765 * Makefile.in (ALL_MACHINES): Add ppc-dis.o and ppc-opc.o.
2766 (CFILES): Add ppc-dis.c.
2767 (ppc-dis.o, ppc-opc.o): New targets.
2768 * configure.in: Build ppc-dis.o and ppc-opc.o for bfd_rs6000_arch.
2770 Mon Jan 17 20:05:49 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
2772 * hppa-dis.c (print_insn_hppa): Handle 'N' in assembler template.
2773 No space before 'u', 'f', or 'N'.
2775 Sun Jan 16 14:20:16 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
2777 * i386-dis.c (print_insn_i386): Add FIXME comment regarding reading
2778 farther than we should.
2780 * i386-dis.c (dis386): Use Yb and Yv for scasb and scasS.
2782 Thu Jan 6 12:38:05 1994 David J. Mackenzie (djm@thepub.cygnus.com)
2784 * sparc-dis.c m68k-dis.c alpha-dis.c a29k-dis.c: Fix comments.
2786 Wed Jan 5 11:56:21 1994 David J. Mackenzie (djm@thepub.cygnus.com)
2788 * i960-dis.c (print_insn_i960): Only read word2 if the instruction
2789 needs it, to prevent reading past the end of a section.
2791 Wed Nov 17 17:20:12 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2793 * mips-opc.h: Use macro for j instruction, to support SVR4 PIC.
2794 Removed t,A case for la; always use t,A(b) case.
2796 Mon Nov 8 12:37:36 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2798 From Ted Lemen <mellon@pepper.ncd.com>
2799 * mips-dis.c (print_insn_arg): Handle 'k'.
2800 * mips-opc.c: Make cache use k, not t.
2802 Sun Nov 7 23:52:34 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2804 * alpha-opc.h, alpha-dis.c (print_insn_alpha): Add
2805 FLOAT_MEMORY_FORMAT_CODE, FLOAT_BRANCH_FORMAT_CODE, correct
2806 FLOAT_FORMAT_CODE to put out floating point register names.
2808 Mon Nov 1 18:17:51 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2810 * mips-opc.c: Use macros for jal variants, to support SVR4 PIC.
2812 Thu Oct 28 17:42:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2814 * a29k-dis.c (print_insn): Use 0x%08x, not 0x%8x.
2816 Wed Oct 27 11:48:01 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2818 * mips-opc.c (dsll, dsra, dsrl): Added '>' cases for shift counts
2819 larger than 32. Moved dsxx32 variants first for disassembler.
2821 Mon Oct 25 11:33:14 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
2823 * z8kgen.c, z8k-opc.h: Add full lda information.
2825 Tue Oct 19 12:39:25 1993 Jeffrey A Law (law@cs.utah.edu)
2827 * hppa-dis.c (print_insn_hppa): Do not emit a space after
2828 movb instructions. Any necessary space will be emitted by
2829 the code to handle nullification completers.
2831 Wed Oct 13 16:19:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2833 * mips-opc.c: Moved l.d down so that it disassembles as ldc1.
2835 Fri Oct 8 02:34:21 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2837 * alpha-opc.h: Add ldl_l, fix typo for ldq_u.
2838 * alpha-dis.c (print_insn_alpha): Add code for PAL_FORMAT_CODE.
2840 Tue Oct 5 17:47:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2842 * mips-opc.c: Correct lwu opcode value (book had it wrong).
2844 Thu Sep 30 11:26:18 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
2846 * z8k-dis.c (FETCH_DATA): get just the right amount of data.
2847 (unpack_instr): Cope with ARG_IMM4M1 type instructions.
2849 Wed Sep 29 16:24:49 1993 K. Richard Pixley (rich@sendai.cygnus.com)
2851 * m88k-dis.c (m88kdis): comment change. Remove space after
2853 (printop): handle new arg types DEC and XREG for m88110.
2855 Tue Sep 28 19:20:16 1993 Jeffrey A Law (law@snake.cs.utah.edu)
2857 * hppa-dis.c (print_insn_hppa): Handle 'z' operand
2858 type for absolute branch addresses. Delete special
2859 "ble" and "be" code in 'W' operand code.
2861 Fri Sep 24 14:08:33 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2863 * mips-opc.c: Set hazard information correctly for branch
2864 likely instructions.
2866 Fri Sep 17 04:41:17 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2868 * alpha-dis.c (print_insn_alpha), alpha-opc.h: Fix bugs, use
2869 info->fprintf_func for printing and info->print_address_func for
2872 Wed Sep 15 12:12:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2874 * mips-opc.c: Set INSN_TRAP for tXX instructions.
2876 Thu Sep 9 10:11:27 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2878 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson):
2879 Corrected second case of "b" for disassembler.
2881 Tue Sep 7 14:25:15 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2883 * mips-dis.c, m88k-dis.c: Don't include libbfd.h. Changed calls
2884 to BFD swapping routines to correspond to BFD name changes.
2886 Thu Sep 2 10:35:25 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2888 * mips-opc.c: Change div machine instruction to be z,s,t rather
2889 than s,t. Change div macro to be d,v,t rather than d,s,t.
2890 Likewise for divu, ddiv, ddivu. Added z,s,t case for drem, dremu,
2891 rem and remu which generates only the corresponding div
2892 instruction. This is for compatibility with the MIPS assembler,
2893 which only generates the simple machine instruction when an
2894 explicit destination of $0 is used.
2895 * mips-dis.c (print_insn_arg): Handle 'z' (always register zero).
2897 Thu Aug 26 17:41:44 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2899 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Set
2900 WR_31 hazard for bal, bgezal, bltzal.
2902 Thu Aug 26 17:20:02 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
2904 * hppa-dis.c (print_insn_hppa): Use print function
2905 from within the disassemble_info, not fprintf_filtered.
2907 Wed Aug 25 13:51:40 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
2909 * hppa-dis.c (print_insn_hppa): Handle '|' like '>'. (From Jeff
2910 Law, law@cs.utah.edu.)
2912 Mon Aug 23 12:44:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2914 * mips-opc.c ("absu"): Removed.
2917 Fri Aug 20 10:52:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2919 * mips-opc.c: Added r6000 and r4000 instructions and macros.
2920 Changed hazard information to distinguish between memory load
2921 delays and coprocessor load delays.
2923 Wed Aug 18 15:39:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2925 * mips-opc.c: li.d uses "T,L", not "S,F". Added li.s.
2927 Tue Aug 17 09:44:42 1993 David J. Mackenzie (djm@thepub.cygnus.com)
2929 * configure.in: Don't pass cpu to config.bfd.
2931 Tue Aug 17 12:23:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2933 * m88k-dis.c (m88kdis): Make class unsigned.
2935 Thu Aug 12 15:08:18 1993 Ian Lance Taylor (ian@cygnus.com)
2937 * alpha-dis.c (print_insn_alpha): One branch format case was
2938 missing the instruction name.
2940 Wed Aug 11 19:29:39 1993 David J. Mackenzie (djm@thepub.cygnus.com)
2942 * Makefile.in (ALL_MACHINES): Renamed from DIS_LIBS.
2943 Add the arch-specific auxiliary files.
2944 (OFILES): Remove the arch-specific auxiliary files
2945 and use BFD_MACHINES instead of DIS_LIBS.
2946 * configure.in: Set BFD_MACHINES based on --with-targets option.
2948 Thu Aug 12 12:04:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2950 * mips-opc.c: Added lwc1 E,A(b) to go with lwc1 T,A(b). Similarly
2953 Sun Aug 8 15:09:30 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
2955 * sparc-opc.c: Change CONST to const to deal with gcc
2956 -Dconst=__const -traditional.
2958 Fri Aug 6 10:58:55 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2960 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Took
2961 coprocessor instructions out of #if 0, and made them use new
2964 Thu Aug 5 17:11:06 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
2966 * sparc-dis.c: Include ansidecl.h before opcodes/sparc.h.
2968 Fri Jul 30 18:48:15 1993 John Gilmore (gnu@cygnus.com)
2970 * sparc-opc.c: Add F_JSR, F_UNBR, or F_CONDBR flags to each branch
2971 instruction, for use by the disassembler.
2973 * sparc-dis.c (SEX): Add sign extension macro. Replace many
2974 hand-coded sign extensions that depended on 32-bit host ints.
2975 FIXME, we still depend on big-endian host bitfield ordering.
2976 (sparc_print_insn): Set the insn_info_valid field, and the
2977 other fields that describe the instruction being printed.
2979 Tue Jul 27 17:04:58 1993 Jim Wilson (wilson@sphagnum.cygnus.com)
2981 * sparc-opc.c (call): Accept all 6 addressing modes valid for
2982 `jmp' instead of just one of them.
2984 Wed Jul 21 11:43:32 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
2986 * hppa-dis.c: Move floating registers from reg_names to fp_reg_names.
2987 (fput_fp_reg_r): Renamed from fput_reg_r.
2988 (fput_fp_reg): New function.
2989 (print_insn_hppa): Use fput_fp_reg{,_r} where appropriate.
2991 * hppa-dis.c (print_insn_hppa, cases 'a', 'd'): Print space afterwards.
2993 * hppa-dis.c (print_insn_hppa, case 'd'): Use GET_COND not GET_FIELD.
2995 Mon Jul 19 13:52:21 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
2997 * hppa-dis.c (print_insn_hppa): Use extract_5r_store for 'r'.
2999 * hppa-dis.c (print_insn_hppa, case '>'): If next character is 'n',
3000 don't output a space.
3002 * hppa-dis.c (float_format_names): 10 is undefined, and 11 is quad.
3004 Sun Jul 18 16:30:02 1993 Jim Kingdon (kingdon@rtl.cygnus.com)
3006 * mips-opc.c: New file, containing opcode table from
3007 ../include/opcode/mips.h.
3008 * Makefile.in: Add it.
3010 Thu Jul 15 12:37:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3012 * m88k-dis.c: New file, moved in from gdb and changed to use the
3013 new dis-asm.h disassembler interface.
3014 * Makefile.in (DIS_LIBS): Added m88k-dis.o.
3015 (m88k-dis.o): New target.
3017 Tue Jul 13 10:04:16 1993 Ian Lance Taylor (ian@cygnus.com)
3019 * mips-dis.c (print_insn_arg, _print_insn_mips): Made pointer to
3020 argument string const char * to correspond to opcode/mips.h.
3022 Tue Jul 6 15:18:37 1993 Ian Lance Taylor (ian@cygnus.com)
3024 * mips-dis.c: Updated to account for name changes in new version
3026 * Makefile.in: Added header file dependencies.
3028 Sat Jul 3 23:47:56 1993 Doug Evans (dje@canuck.cygnus.com)
3030 * h8300-dis.c (bfd_h8_disassemble): Correct fetching of instruction.
3032 Thu Jul 1 12:23:38 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3034 * m68k-dis.c (NEXTWORD, NEXTLONG): Use ((x) ^ 0x8000) - 0x8000 to sign
3035 extend, rather than shifts.
3037 Sun Jun 20 20:56:56 1993 Ken Raeburn (raeburn@poseidon.cygnus.com)
3039 * Makefile.in: Undo 15 June change.
3041 Fri Jun 18 14:15:15 1993 Per Bothner (bothner@deneb.cygnus.com)
3043 * m68k-dis.c (print_insn_arg): Change return value to byte count
3045 * m68k-dis.c: Re-write to detect invalid operands before
3046 printing anything, so we can handle this the same way we
3047 handle invalid opcodes.
3049 Thu Jun 17 15:01:36 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
3051 * sh-dis.c, sh-opc.h: Understand some more opcodes.
3053 Wed Jun 16 13:48:05 1993 Ian Lance Taylor (ian@cygnus.com)
3055 * hppa-dis.c: Include <ansidecl.h> and sysdep.h before other
3058 Tue Jun 15 21:45:26 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3060 * sparc-dis.c: Don't declare qsort, since sysdep.h might.
3062 * configure.in: Do make sysdep.h link.
3063 * Makefile.in: Search ../include. Don't search ../bfd.
3065 Tue Jun 15 13:36:10 1993 Stu Grossman (grossman@cygnus.com)
3067 Changes from Jeff Law, law@cs.utah.edu:
3068 * hppa-dis.c: Fix typo. 'a' and 'd' were reversed.
3069 Do not print a space before the completers specified by
3072 Fri Jun 11 18:40:21 1993 Ken Raeburn (raeburn@cygnus.com)
3074 * mips-dis.c: No longer need to bomb out if HOST_64_BIT is
3075 defined, since gdb has been fixed.
3077 Changes from Jeff Law, law@cs.utah.edu:
3078 * hppa-dis.c (print_insn_hppa): Last argument to fput_reg,
3079 fput_reg_r, fput_creg, fput_const, and fputs_filtered should
3080 be a *disassemble_info, not a *FILE.
3081 * hppa-dis.c: Support 'd', '!', and 'a'.
3082 * hppa-dis.c: Support 's' to extract a 2 bit space register.
3083 * hppa-dis.c: Delete cases which are no longer needed.
3085 Fri Jun 11 07:53:48 1993 Jim Kingdon (kingdon@cygnus.com)
3087 * m68k-dis.c (print_insn_{m68k,arg}): Add MMU codes.
3089 Tue Jun 8 12:25:01 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
3091 * h8300-dis.c: New file, removed from bfd/cpu-h8300.c, with
3094 Mon Jun 7 12:58:49 1993 Per Bothner (bothner@rtl.cygnus.com)
3096 * Makefile.in (CSEARCH): Add -I../bfd for sysdep.h and bfd.h.
3097 * configure.in: No longer need to configure to get sysdep.h.
3099 Thu Jun 3 15:56:49 1993 Stu Grossman (grossman@cygnus.com)
3101 * Patches from Jeffrey Law <law@cs.utah.edu>.
3102 * hppa-dis.c: Support 'I', 'J', and 'K' in output
3103 templates for 1.1 FP computational instructions.
3105 Tue May 25 13:05:48 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3107 * h8500-dis.c (print_insn_h8500): Address argument is type
3109 * z8k-dis.c (print_insn_z8k, print_insn_z8001, print_insn_z8002):
3112 * h8500-opc.h (addr_class_type): No comma at end of enumerator.
3113 * sh-opc.h (sh_nibble_type, sh_arg_type): Ditto.
3115 * sparc-dis.c (compare_opcodes): Move static declaration to
3118 Fri May 21 14:17:37 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3120 * sparc-dis.c (print_insn_sparc): Implement 'n' argument for unimp
3121 instruction, remove unimp hack from 'l' argument.
3123 Wed May 19 15:35:54 1993 Stu Grossman (grossman@cygnus.com)
3125 * z8k-dis.c (fetch_data): Use unsigned char to make ancient gcc's
3128 Fri May 14 15:22:46 1993 Ian Lance Taylor (ian@cygnus.com)
3130 * Based on patches from davidj@ICSI.Berkeley.EDU (David Johnson):
3131 * mips-dis.c (print_insn_arg): Handle 'C' for general coprocessor
3134 Fri May 14 00:09:14 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3136 * hppa-dis.c: Include dis-asm.h before sysdep.h. Changed some
3137 arrays of string pointers to 2-d arrays of chars, to save
3140 Thu May 6 20:51:17 1993 Fred Fish (fnf@cygnus.com)
3142 * a29k-dis.c, alpha-dis.c, i960-dis.c, sparc-dis.c, z8k-dis.c:
3143 Cast second arg to read_memory_func to "bfd_byte *", as necessary.
3145 Tue May 4 20:31:10 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3147 * hppa-dis.c: New file from Utah, adapted to new disassembler
3149 * Makefile.in: Include it.
3151 Mon Apr 26 18:17:42 1993 Steve Chamberlain (sac@thepub.cygnus.com)
3153 * sh-dis.c, sh-opc.h: New files.
3155 Fri Apr 23 18:51:22 1993 Steve Chamberlain (sac@thepub.cygnus.com)
3157 * alpha-dis.c, alpha-opc.h: New files.
3159 Tue Apr 6 12:54:08 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3161 * mips-dis.c: Sign extend 'j' and 'b' arguments, delta is a signed
3164 Mon Apr 5 17:37:37 1993 John Gilmore (gnu@cygnus.com)
3166 * sparc-dis.c: Make "ta" the default trap instruction, "t" the alias.
3168 Fri Apr 2 07:24:27 1993 Ian Lance Taylor (ian@cygnus.com)
3170 * a29k-dis.c, sparc-dis.c, sparc-opc.c: Use CONST rather than
3173 Thu Apr 1 11:20:43 1993 Jim Kingdon (kingdon@cygnus.com)
3175 * sparc-dis.c: Use fprintf_func a few places where I forgot,
3176 and double percent signs a few places.
3178 * a29k-dis.c, i960-dis.c: New, merged from gdb and binutils.
3180 * i386-dis.c, m68k-dis.c, mips-dis.c, sparc-dis.c:
3181 Use info->print_address_func not print_address.
3183 * dis-buf.c (generic_print_address): New function.
3185 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3187 * Makefile.in: Add sparc-dis.c.
3188 sparc-dis.c: New file, merges binutils and gdb versions as follows:
3190 Add `add' instruction to the set that get checked
3191 for a preceding `sethi' in order to print an absolute address.
3192 * (print_insn): Disassembly prefers real instructions.
3193 (is_delayed_branch): Speed up.
3194 * sparc-opcode.h: Add ALIAS bit to aliases. Fix up opcode tables.
3195 Still missing some float ops, and needs testing.
3196 * sparc-pinsn.c (print_insn): Eliminate 'set' test, subsumed by
3197 F_ALIAS. Use printf, not fprintf, when not passing a file
3199 (compare_opcodes): Check that identical instructions have
3200 identical opcodes, complain otherwise.
3203 * Include reg_names.
3205 Use dis-asm.h/read_memory_func interface.
3207 Wed Mar 31 20:49:06 1993 K. Richard Pixley (rich@rtl.cygnus.com)
3209 * h8500-dis.c, i386-dis.c, m68k-dis.c, z8k-dis.c (fetch_data):
3210 deliberately return non-zero to setjmp from longjmp. Otherwise
3211 this code fails to compile.
3213 Wed Mar 31 17:04:31 1993 Stu Grossman (grossman@cygnus.com)
3215 * m68k-dis.c: Fix prototype for fetch_arg().
3217 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3219 * dis-buf.c: New file, for new read_memory_func interface.
3220 Makefile.in (OFILES): Include it.
3221 m68k-dis.c, i386-dis.c, h8500-dis.c, mips-dis.c, z8k-dis.c:
3222 Use new read_memory_func interface.
3224 Mon Mar 29 14:02:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
3226 * h8500-dis.c (print_insn_h8500): Get sign of fp offsets right.
3227 * h8500-opc.h: Fix couple of opcodes.
3229 Wed Mar 24 02:03:36 1993 david d `zoo' zuhn (zoo at poseidon.cygnus.com)
3231 * Makefile.in: add dvi & installcheck targets
3233 Mon Mar 22 18:55:04 1993 John Gilmore (gnu@cygnus.com)
3235 * Makefile.in: Update for h8500-dis.c.
3237 Fri Mar 19 14:27:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
3239 * h8500-dis.c, h8500-opc.h: New files
3241 Thu Mar 18 14:12:37 1993 Per Bothner (bothner@rtl.cygnus.com)
3243 * mips-dis.c, z8k-dis.c: Converted to use interface defined in
3244 ../include/dis-asm.h.
3245 * m68k-dis.c: New file (merge of ../binutils/m68k-pinsn.c
3246 and ../gdb/m68k-pinsn.c).
3247 * i386-dis.c: New file (merge of ../binutils/i386-pinsn.c
3248 and ../gdb/i386-pinsn.c).
3249 * m68881-ext.c: New file. Moved definition of
3250 ext_format ext_format_68881 from ../gdb/m68k-tdep.c.
3251 * Makefile.in: Adjust for new files.
3252 * i386-dis.c: Patches from John Hassey (hassey@dg-rtp.dg.com).
3253 * m68k-dis.c: Recognize '9' placement code, so (say) pflush
3254 can be dis-assembled.
3256 Wed Feb 17 09:19:47 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3258 * mips-dis.c (print_insn_arg): Now returns void.
3260 Mon Jan 11 16:09:16 1993 Fred Fish (fnf@cygnus.com)
3262 * mips-dis.c (ansidecl.h): Include for benefit of sysdep.h
3263 files that use the macros.
3265 Thu Jan 7 13:15:17 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3267 * mips-dis.c: New file, from gdb/mips-pinsn.c.
3268 * Makefile.in (DIS_LIBS): Added mips-dis.o.
3269 (CFILES): Added mips-dis.c.
3271 Thu Jan 7 07:36:33 1993 Steve Chamberlain (sac@thepub.cygnus.com)
3273 * z8k-dis.c (print_insn_z8001, print_insn_z8002): new routines
3274 * z8kgen.c, z8k-opc.h: fix sizes of some shifts.
3276 Tue Dec 22 15:42:44 1992 Per Bothner (bothner@rtl.cygnus.com)
3278 * Makefile.in: Improve *clean rules.
3279 * configure.in: Allow a default host.
3281 Tue Nov 17 19:53:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
3283 * Makefile.in: also use -I$(srcdir)/../bfd, since some sysdep
3284 files include other sysdep files
3286 Thu Nov 12 16:10:37 1992 Steve Chamberlain (sac@thepub.cygnus.com)
3288 * z8k-dis.c z8k-opc.h z8kgen.c: checkpoint
3290 Fri Oct 9 04:56:05 1992 John Gilmore (gnu@cygnus.com)
3292 * configure.in: For host support, use ../bfd/configure.host
3293 so it stays in sync with the ../bfd/hosts database.
3295 Thu Oct 1 23:38:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
3297 * configure.in: use cpu-vendor-os triple instead of nested cases
3299 Wed Sep 30 16:09:20 1992 Michael Werner (mtw@cygnus.com)
3301 * z8k-dis.c (unparse_instr): fix bug where opcode returned was
3302 *always* the wrong one.
3304 Wed Sep 30 07:42:17 1992 Steve Chamberlain (sac@thepub.cygnus.com)
3306 * z8kgen.c: added copyright info
3308 Tue Sep 29 12:20:21 1992 Steve Chamberlain (sac@thepub.cygnus.com)
3310 * z8k-dis.c (unparse_instr): prettier tabs
3311 * z8kgen.c -> z8k-opc.h: bug fixes in tables
3313 Fri Sep 25 12:50:32 1992 Stu Grossman (grossman at cygnus.com)
3315 * configure.in: Add ncr* configuration.
3316 * z8k-dis.c (struct instr_data_s): Make instr_asmsrc char to make
3317 picayune ANSI compilers happy.
3319 Sep 20 08:50:55 1992 Fred Fish (fnf@cygnus.com)
3321 * configure.in (i386): Make i386 and i486 synonymous for now.
3322 * configure.in (i[34]86-*-sysv4): Add my_host definition.
3324 Fri Sep 18 17:01:23 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
3326 * Makefile.in (install): Fix typo.
3328 Fri Sep 18 02:04:24 1992 John Gilmore (gnu@cygnus.com)
3330 * Makefile.in (make): Remove obsolete crud.
3331 (sparc-opc.o): Avoid Sun Make VPATH bug.
3333 Tue Sep 8 17:29:27 1992 K. Richard Pixley (rich@sendai.cygnus.com)
3335 * Makefile.in: since there are no SUBDIRS, remove rule and
3336 references of subdir_do.
3338 Tue Sep 8 17:02:58 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
3340 * Makefile.in (install): Get the library name right here too.
3341 Don't install bfd.h, since it's unrelated to this library. No
3342 subdirs to recurse into, either.
3343 (CFILES): The source file has a .c suffix, not .o.
3345 * sparc-opc.c: New file, moved from BFD.
3346 * Makefile.in (OFILES): Build it.
3348 Thu Sep 3 16:59:20 1992 Michael Werner (mtw@cygnus.com)
3350 * z8k-dis.c: fixed forward refferences of some declarations.
3352 Mon Aug 31 16:09:45 1992 Michael Werner (mtw@cygnus.com)
3354 * Makefile.in: get the name of the library right
3356 Mon Aug 31 13:47:35 1992 Steve Chamberlain (sac@thepub.cygnus.com)
3358 * z8k-dis.c: knows how to disassemble z8k stuff
3359 * z8k-opc.h: new file full of z8000 opcodes
3363 version-control: never