1 Tue Feb 3 17:19:40 1998 Doug Evans <devans@seba.cygnus.com>
3 * cgen-opc.c (cgen_set_cpu): Initialize hardware table.
4 * m32r-opc.h, m32r-opc.c, m32r-asm.c, m32r-dis.c: Regenerate.
6 Mon Feb 2 19:22:15 1998 Steve Haworth <steve@pm.cse.rmit.EDU.AU>
8 * tic30-dis.c: New file.
9 * disassemble.c (disassembler): Add bfd_arch_tic30 case.
10 * configure.in: Handle bfd_tic30_arch.
11 * Makefile.am: Rebuild dependencies.
12 (CFILES): Add tic30-dis.c
13 (ALL_MACHINES): Add tic30-dis.lo.
14 * configure, Makefile.in: Rebuild.
17 Mon Feb 2 11:04:08 1998 Nick Clifton <nickc@cygnus.com>
19 * m32r-opc.c, m32r-opc.h, m32r-asm.c m32r-dis.c: Newly generated
20 versions after updates to m32r.cpu to remove mulwhi-a, mulwlo-a,
21 macwhi-a and macwlo-a instructions.
25 Fri Jan 30 17:39:21 1998 Ian Carmichael <iancarm@cygnus.com>
27 * dvp-opc.c, fixed encoding of a bunch of instructions to
28 be consistent with the asmvu assembler (and inconsistent
29 with the specification).
31 Thu Jan 29 18:14:56 1998 Ian Carmichael <iancarm@cygnus.com>
33 * dvp-opc.c, fixed order of pkemscal/pkemscalf instructions
34 in the opcode table. The pkemscalf instruction must come first.
36 Thu Jan 29 16:47:24 1998 Ian Carmichael <iancarm@cygnus.com>
38 * dvp-opc.c, MAXIi should be VUOP6(0x1d) instead of 0x2d.
41 Thu Jan 29 13:02:56 1998 Doug Evans <devans@canuck.cygnus.com>
43 * m32r-opc.h (HAVE_CPU_M32R): Define.
46 Wed Jan 28 13:46:19 1998 Doug Evans <devans@canuck.cygnus.com>
48 * dvp-dis.c, dvp-opc.c: New files.
49 * configure.in: Compile them if bfd_dvp_arch, as well as mips.
50 * configure: Regenerate.
51 * Makefile.am (ALL_MACHINES): Add dvp-{dis,opc}.lo.
52 (dvp-dis.lo,dvp-opc.lo): Add rules for.
53 (mips-dis.lo): Compile with @archdefs@.
54 * Makefile.in: Regenerate.
55 * disassemble.c: Define ARCH_mips ifdef ARCH_dvp.
56 * mips-dis.c (print_insn_little_mips): Check for DVP insns.
59 Wed Jan 28 09:55:03 1998 Nick Clifton <nickc@cygnus.com>
61 * v850-opc.c (insertion routines): If both alignment and size is
62 wrong then report this.
64 Tue Jan 27 21:52:59 1998 Jeffrey A Law (law@cygnus.com)
66 * mips-dis.c (_print_insn_mips): Set target_processor as appropriate.
67 Only recognize instructions for the current target_processor.
69 Thu Jan 22 16:20:17 1998 Fred Fish <fnf@cygnus.com>
71 * d10v-dis.c (PC_MASK): Correct value.
72 (print_operand): If there's a reloc, don't calculate the
73 address because they could be in different sections.
76 Thu Jan 22 16:10:32 1998 Doug Evans <devans@seba.cygnus.com>
78 * cgen.sh: Rewrite to be like simulator's version.
79 * Makefile.am (cgen): Update call to cgen.sh.
80 * Makefile.in: Regenerate
83 Fri Jan 16 15:29:11 1998 Jim Blandy <jimb@zwingli.cygnus.com>
85 * mips-opc.c (mips_builtin_opcodes): Move 4010's "addciu"
86 instruction after the 4650's "mul" instruction; nobody's using the
87 4010 these days. If object files someday indicate which processor
88 variant they're intended for, we can do a better job at this.
91 Tue Jan 13 09:21:56 1998 Jeffrey A Law (law@cygnus.com)
93 * mips-opc.c (c.lt.s): Add r5900 variant.
97 Mon Jan 12 14:43:54 1998 Doug Evans <devans@seba.cygnus.com>
99 * cgen-asm.c (build_asm_hash_table): Traverse compiled in table using
100 table provided entry size. Use CGEN_INSN_MNEMONIC.
101 (cgen_parse_keyword): Rewrite.
102 * cgen-dis.c (build_dis_hash_table): Traverse compiled in table using
103 table provided entry size. Use CGEN_INSN_MASK_BITSIZE.
104 * cgen-opc.c: Clean up pass over `struct foo' usage.
105 (cgen_keyword_lookup_value): Handle "" entry.
106 (cgen_keyword_add): Likewise.
107 start-sanitize-cygnus
108 * Makefile.am: Add cgen support.
109 * Makefile.in: Regenerate.
110 * configure.in: Add cgen support.
111 * configure: Regenerate.
112 * aclocal.m4: Regenerate.
113 * cgen.sh, cgen-asm.in, cgen-dis.in: New files.
116 Mon Dec 22 12:37:06 1997 Ian Lance Taylor <ian@cygnus.com>
118 * mips-opc.c: Add FP_D to s.d instruction flags.
120 Wed Dec 17 11:38:29 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
122 * m68k-opc.c (halt, pulse): Enable them on the 68060.
125 Tue Dec 16 15:22:53 1997 Fred Fish <fnf@cygnus.com>
127 * tic80-opc.c (tic80_opcodes): Revert change that put the 32 bit
128 PC relative offset forms before the 15 bit forms. An assembler command
129 line option now chooses the default.
133 Tue Dec 16 13:24:22 1997 Jeffrey A Law (law@cygnus.com)
135 * mips-opc.c: Add many missing r5900 instructions.
139 Tue Dec 16 15:22:51 1997 Michael Meissner <meissner@cygnus.com>
141 * d30v-opc.c (d30v_opcode_table): Set new flags bits
142 FLAG_{2WORD,MUL{16,32},ADDSUBppp}, in appropriate instructions.
145 1997-12-15 Brendan Kehoe <brendan@lisa.cygnus.com>
147 * configure: Only build libopcodes shared if --enable-shared's value
148 was `yes', or was set to `*opcodes*'.
149 * aclocal.m4: Likewise.
150 * NOTE: this really needs to be fixed in libtool/libtool.m4, the
151 original source of this bit of code. It's not clear what the best fix
155 Mon Dec 15 12:43:36 1997 Jeffrey A Law (law@cygnus.com)
157 * mips-opc.c (mtpc, mfpc, mtps, mfps): Add r5900 variants.
160 Fri Dec 12 11:57:04 1997 Fred Fish <fnf@cygnus.com>
162 * tic80-opc.c (OFF_SL_PC, OFF_SL_BR): Minor formatting change.
163 (tic80_opcodes): Reorder table entries to put the 32 bit PC relative
164 offset forms before the 15 bit forms, to default to the long forms.
167 Fri Dec 12 01:32:30 1997 Richard Henderson <rth@cygnus.com>
169 * alpha-opc.c (cvttq/*u*): Remove, as that suffix is invalid.
171 Wed Dec 10 17:42:35 1997 Nick Clifton <nickc@cygnus.com>
173 * arm-dis.c (print_insn_little_arm): Prevent examination of stored
174 symbol if none is present.
175 (print_insn_big_arm): Prevent examination of stored symbol if
178 Thu Oct 23 21:13:37 1997 Fred Fish <fnf@cygnus.com>
180 * d10v-opc.c (d10v_opcodes): Correct entry for RTE.
182 Mon Dec 8 11:21:07 1997 Nick Clifton <nickc@cygnus.com>
184 * disassemble.c: Remove disasm_symaddr() function.
186 * arm-dis.c: Use info->symbol instead of info->flags to determine
187 if disassmbly should be in Thumb or Arm mode.
189 Tue Dec 2 09:54:27 1997 Nick Clifton <nickc@cygnus.com>
191 * arm-dis.c: Add support for disassembling Thumb opcodes.
192 (print_insn_thumb): New function.
194 * disassemble.c (disasm_symaddr): New function.
196 * arm-opc.h: Display nop pseudo ops alongside equivalent disassembly.
197 (thumb_opcodes): Table of Thumb opcodes.
199 Mon Dec 1 12:25:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
201 * m68k-opc.c (btst): Change Dd@s to Dd;b.
203 * m68k-dis.c (print_insn_arg): Recognize 'm', 'n', 'o', 'p', 'q',
204 and 'v' as operand types.
206 Mon Dec 1 11:56:50 1997 Ian Lance Taylor <ian@cygnus.com>
208 * m68k-opc.c: Add argument for lpstop. From Olivier Carmona
209 <olivier.carmona@di.epfl.ch>.
210 * m68k-dis.c (print_insn_m68k): Handle special case of lpstop,
211 which has a two word opcode with a one word argument.
214 Sun Nov 23 22:25:21 1997 Michael Meissner <meissner@cygnus.com>
216 * d30v-opc.c (d30v_opcode_table, case cmpu): Immediate field is
217 unsigned, not signed.
218 (d30v_format_table): Add SHORT_CMPU cases for cmpu.
222 Wed Nov 19 17:42:35 1997 Richard Henderson <rth@cygnus.com>
224 * sh-dis.c (print_insn_shx): Recognize all sh4 additions.
225 * sh-opc.h (fmov): Add @<REG_M>+,<DX_REG_N> variant for sh4.
226 (ftrv): Slay the cut-and-paste monster.
229 Tue Nov 18 23:10:03 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
231 * d10v-dis.c (print_operand):
232 Split OPERAND_FLAG into OPERAND_FFLAG and OPERAND_CFLAG.
234 Tue Nov 18 18:45:14 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
236 * d10v-opc.c (OPERAND_FLAG): Split into:
237 (OPERAND_FFLAG, OPERAND_CFLAG) .
241 Thu Nov 13 11:05:33 1997 Gavin Koch <gavin@cygnus.com>
243 * mips-opc.c: Move the INSN_MACRO ISA value to the membership
244 field for all INSN_MACRO's.
247 Wed Nov 12 10:16:57 1997 Gavin Koch <gavin@cygnus.com>
249 * mips-opc.c (sync,cache): These are 3900 insns.
251 Tue Nov 11 23:53:41 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
253 sh-opc.h (sh_table): Remove ftst/nan.
255 start-sanitize-vr5400
256 Mon Nov 3 13:23:15 1997 Ken Raeburn <raeburn@cygnus.com>
258 * mips-opc.c (dror32, dror, rzu.ob): Fix bugs in encoding.
259 (c.*.ob, mula.ob, mull.ob, muls.ob, mulsl.ob): Put 'k' version
261 * mips-dis.c (print_insn_arg): Handle VR5400 operand types.
265 Wed Oct 29 15:10:56 1997 Gavin Koch <gavin@cygnus.com>
267 * mips-opc.c (deret,dmult,dmultu,madd,maddu,pref,sdbbp):
268 Add tx49 insns and configury.
271 Tue Oct 28 17:59:32 1997 Ken Raeburn <raeburn@cygnus.com>
273 * mips-opc.c (ffc, ffs): Fix mask.
276 Tue Oct 28 16:34:54 1997 Michael Meissner <meissner@cygnus.com>
278 * d30v-opc.c (pre_defined_registers): Add eit_vb, int_s, and int_m
282 Mon Oct 27 22:34:03 1997 Ken Raeburn <raeburn@cygnus.com>
284 * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
285 start-sanitize-vr5400
286 Added VR5400 instructions.
287 (N5): New cpu-id macro.
289 (WR_HILO, RD_HILO, MOD_HILO): New macros.
291 Mon Oct 27 22:34:03 1997 Ken Raeburn <raeburn@cygnus.com>
293 * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
294 (WR_HILO, RD_HILO, MOD_HILO): New macros.
296 Thu Oct 23 14:57:58 1997 Nick Clifton <nickc@cygnus.com>
298 * v850-dis.c (disassemble): Replace // with /* ... */
300 Wed Oct 22 17:33:21 1997 Richard Henderson <rth@cygnus.com>
302 * sparc-opc.c: Add wr & rd for v9a asr's.
303 * sparc-dis.c (print_insn_sparc): Recognize '_' and '/' for v9a asr's.
304 (v9a_asr_reg_names): New variable.
305 Patch from David Miller <davem@vger.rutgers.edu>.
307 Wed Oct 22 17:18:02 1997 Richard Henderson <rth@cygnus.com>
309 * sparc-opc.c (v9notv9a): New insn type.
310 (IMPDEP): Move to the end to not conflict with edge8 et al.
311 Patch from David Miller <davem@vger.rutgers.edu>.
313 Fri Oct 17 13:18:53 1997 Gavin Koch <gavin@cygnus.com>
315 * mips-opc.c (bnezl,beqzl): Mark these as also tx39.
317 Thu Oct 16 11:55:20 1997 Gavin Koch <gavin@cygnus.com>
319 * mips-opc.c: Note that 'jalx' is (probably incorrectly) marked I1.
321 Tue Oct 14 16:10:31 1997 Nick Clifton <nickc@cygnus.com>
323 * v850-dis.c (disassemble): Use new symbol_at_address_func() field
324 of disassemble_info structure to determine if an overlay address
325 has a matching symbol in low memory.
327 * dis-buf.c (generic_symbol_at_address): New (dummy) function for
328 new symbol_at_address_func field in disassemble_info structure.
330 Fri Oct 10 16:44:52 1997 Nick Clifton <nickc@cygnus.com>
332 * v850-opc.c (extract_d22): Use signed arithmatic.
334 Tue Oct 7 23:40:43 1997 Gavin Koch <gavin@cygnus.com>
336 * mips-opc.c: Three op mult is not an ISA insn.
338 Tue Oct 7 23:37:21 1997 Gavin Koch <gavin@cygnus.com>
340 * mips-opc.c: Fix formatting.
342 Fri Oct 3 17:26:54 1997 Ian Lance Taylor <ian@cygnus.com>
344 * i386-dis.c (OP_E): Explicitly sign extend 8 bit values, rather
345 than assuming that char is signed. Explicitly sign extend 16 bit
346 values, rather than assuming that short is 16 bits.
347 (OP_sI, OP_J, OP_DIR): Likewise.
350 Thu Oct 2 13:36:45 1997 Nick Clifton <nickc@cygnus.com>
352 * v850-dis.c (v850_sreg_names): Use symbolic names for higher
356 Wed Oct 1 16:58:54 1997 Nick Clifton <nickc@cygnus.com>
358 * v850-opc.c: Fix typo in comment.
360 * v850-dis.c (disassemble): Add test of processor type when
363 Wed Oct 1 14:10:20 1997 Ian Lance Taylor <ian@cygnus.com>
365 * configure.in: Use a diversion to set enable_shared before the
366 arguments are parsed.
367 * configure: Rebuild.
369 Thu Sep 25 13:04:59 1997 Ian Lance Taylor <ian@cygnus.com>
371 * m68k-opc.c (TBL1): Use ! rather than `.
372 * m68k-dis.c (print_insn_arg): Remove ` operand specifier.
374 Wed Sep 24 11:29:35 1997 Ian Lance Taylor <ian@cygnus.com>
376 * m68k-opc.c: Correct bchg, bclr, bset, and btst on ColdFire.
378 * m68k-opc.c: Accept tst{b,w,l} with immediate operands on cpu32.
380 * m68k-opc.c: Correct movew of an immediate operand to %sr or %ccr
383 * configure.in: Call AC_CHECK_TOOL before AM_PROG_LIBTOOL.
384 * aclocal.m4: Rebuild with new libtool.
385 * configure: Rebuild.
388 Fri Sep 19 11:45:49 1997 Andrew Cagney <cagney@b1.cygnus.com>
390 * v850-opc.c ("cmov"): Order reg param r1, r2 not r2, r2.
393 Thu Sep 18 11:21:43 1997 Doug Evans <dje@canuck.cygnus.com>
395 * sparc-opc.c (sparclet_cpreg_table): Add %ccsr2, %cccrr, %ccrstr.
397 Tue Sep 16 15:18:20 1997 Nick Clifton <nickc@cygnus.com>
399 * v850-opc.c (v850_opcodes): Further rearrangements.
402 Tue Sep 16 16:12:11 1997 Ken Raeburn <raeburn@cygnus.com>
404 * d30v-opc.c (rot2h, sra2h, srl2h insns): Revert last change.
407 Tue Sep 16 09:48:50 1997 Nick Clifton <nickc@cygnus.com>
409 * v850-opc.c (v850_opcodes): Fields reordered to allow assembler
412 Tue Sep 16 10:01:00 1997 Gavin Koch <gavin@cygnus.com>
414 * mips-opc.c: Added tx39 insns sdbbp, rfe, and deret.
416 * mips16-opc.c: Added mips16 sdbbp.
419 Mon Sep 15 18:31:52 1997 Nick Clifton <nickc@cygnus.com>
421 * v850-opc.c: Initialise processors field of v850_opcode structure.
424 Wed Aug 27 21:42:39 1997 Ken Raeburn <raeburn@cygnus.com>
426 Merge changes from Martin Hunt:
428 * d30v-opc.c: Change mvfacc to accept 6-bit unsigned values.
430 * d30v-opc.c (pre_defined_registers): Add control registers from 0-63.
431 (d30v_opcode_tabel): Add dbt, rtd, srah, and srlh instructions. Fix
432 rot2h, sra2h, and srl2h to use new SHORT_A5S format.
434 * d30v-dis.c (print_insn): Fix disassembly of SHORT_D2 opcodes.
436 * d30v-dis.c (print_insn): First operand of d*i (delayed
437 branch) instructions is relative.
439 * d30v-opc.c (d30v_opcode_table): Change form for repeati.
440 (d30v_operand_table): Add IMM6S3 type.
441 (d30v_format_table): Change SHORT_D2. Add LONG_Db.
443 * d30v-dis.c: Fix bug with ".s" and ".l" extensions
444 and cmp instructions.
446 * d30v-opc.c: Correct entries for repeat*, and sat*.
447 Make IMM5 unsigned. Create IMM6U and IMM12S3U operand
448 types. Correct several formats.
450 * d30v-opc.c: (pre_defined_registers): Add dpsw and dpc.
452 * d30v-opc.c (pre_defined_registers): Change control registers.
454 * d30v-opc.c (d30v_format_table): Correct SHORT_C1 and
455 SHORT_C2. Manual was incorrect.
457 * d30v-dis.c (lookup_opcode): Return value now indicates
458 if an opcode has a short and a long form. Used for deciding
459 to append a ".s" or ".l".
460 (print_insn): Append a ".s" to an instruction if it is
461 the short form and ".l" if it is a long form. Do not append
462 anything if the instruction has only one possible size.
464 * d30v-opc.c: Change mulx2h to require an even register.
465 New form: SHORT_A2; a SHORT_A form that needs an even
466 register as the first operand.
468 * d30v-dis.c (print_insn_d30v): Fix problem where the last
469 instruction was not being disassembled if there were an odd
470 number of instructions.
472 * d30v-opc.c (SHORT_M2, LONG_M2): Two new forms.
476 Fri Sep 12 11:43:54 1997 Nick Clifton <nickc@cygnus.com>
478 * v850-dis.c (disassemble): Improved display of register lists.
481 Thu Sep 11 17:35:10 1997 Doug Evans <dje@canuck.cygnus.com>
483 * sparc-opc.c (sparc_opcodes): Fix assembler args to
484 fzeros, fones, fsrc1, fsrc1s, fsrc2s, fnot1, fnot1s, fnot2s,
485 fors, fnors, fands, fnands, fxors, fxnors, fornot1s, fornot2s,
486 fandnot1s, fandnot2s.
488 Tue Sep 9 10:03:49 1997 Doug Evans <dje@canuck.cygnus.com>
490 * sparc-opc.c (sparc_opcodes): Fix op3 field for fcmpq/fcmpeq.
492 Mon Sep 8 14:06:59 1997 Doug Evans <dje@canuck.cygnus.com>
494 * cgen-asm.c (cgen_parse_address): New argument resultp.
496 * m32r-asm.c (parse_h_hi16): Right shift numbers by 16.
498 Tue Sep 2 18:39:08 1997 Jeffrey A Law (law@cygnus.com)
500 * mn10200-dis.c (disassemble): PC relative instructions are
501 relative to the next instruction, not the current instruction.
503 Tue Sep 2 15:41:55 1997 Nick Clifton <nickc@cygnus.com>
505 * v850-dis.c (disassemble): Only signed extend values that are not
506 returned by extract functions.
507 Remove use of V850_OPERAND_ADJUST_SHORT_MEMORY flag.
509 Tue Sep 2 15:39:40 1997 Nick Clifton <nickc@cygnus.com>
511 * v850-opc.c: Update comments. Remove use of
512 V850_OPERAND_ADJUST_SHORT_MEMORY. Fix several operand patterns.
514 Tue Aug 26 09:42:28 1997 Nick Clifton <nickc@cygnus.com>
516 * v850-opc.c (MOVHI): Immediate parameter is unsigned.
518 Mon Aug 25 15:58:07 1997 Christopher Provenzano <proven@cygnus.com>
520 * configure: Rebuilt with latest devo autoconf for NT support.
522 Fri Aug 22 10:35:15 1997 Nick Clifton <nickc@cygnus.com>
524 * v850-dis.c (disassemble): Use curly brace syntax for register
527 * v850-opc.c (v850_opcodes[]): Add NOT_R0 flag to decect cases
528 where r0 is being used as a destination register.
531 Thu Aug 21 11:09:09 1997 Nick Clifton <nickc@cygnus.com>
533 * v850-opc.c (v850_opcodes[]): Move divh opcodes next to each other.
537 Wed Aug 20 00:43:11 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
539 * sh-opc.h (sh_arg_type): Add A_SGR and A_DBR.
540 (sh_nibble_type, sh_arg_type): Add SH4 floating point extensions.
541 (sh_table): Likewise. Add movca.l, ocbi, ocbp, ocbwb.
542 Add insns to access SGR and DBR.
543 * sh-dis.c (print_insn_shx): Add SH4 floating point extensions.
546 Tue Aug 19 10:59:59 1997 Richard Henderson <rth@cygnus.com>
548 * alpha-opc.c (alpha_opcodes): Fix hw_rei_stall mungage.
551 Mon Aug 18 11:10:03 1997 Nick Clifton <nickc@cygnus.com>
553 * v850-opc.c (v850_opcodes[]): Remove use of flag field.
554 * v850-opc.c (v850_opcodes[]): Add support for reversed short load
557 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
559 * configure (cgen_files): Add support for v850e target.
560 * configure.in (cgen_files): Add support for v850e target.
562 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
564 * configure (cgen_files): Add support for v850ea target.
565 * configure.in (cgen_files): Add support for v850ea target.
568 Fri Aug 15 05:17:48 1997 Doug Evans <dje@canuck.cygnus.com>
570 * configure.in (bfd_arc_arch): Add.
571 * configure: Rebuild.
572 * Makefile.am (ALL_MACHINES): Add arc-dis.lo, arc-opc.lo.
573 * Makefile.in: Rebuild.
574 * arc-dis.c, arc-opc.c: New files.
575 * disassemble.c (ARCH_all): Define ARCH_arc.
576 (disassembler): Add ARC support.
578 Wed Aug 13 18:52:11 1997 Nick Clifton <nickc@cygnus.com>
581 * v850-dis.c (disassemble): Add support for v850EA instructions.
583 * v850-opc.c (insert_i5div, extract_i5div): New Functions.
584 (v850_opcodes): Add v850EA instructions.
586 * v850-dis.c (disassemble): Add support for v850E instructions.
588 * v850-opc.c (insert_d5_4, extract_d5_4, insert_d16_16,
589 extract_d16_16, insert_i9, extract_i9, insert_u9, extract_u9,
590 insert_spe, extract_spe): New Functions.
591 (v850_opcodes): Add v850E instructions.
594 * v850-opc.c: Reorganised and re-layed out to improve readability
597 Tue Aug 5 23:09:31 1997 Ian Lance Taylor <ian@cygnus.com>
599 * configure: Rebuild with autoconf 2.12.1.
601 Mon Aug 4 12:02:16 1997 Ian Lance Taylor <ian@cygnus.com>
603 * aclocal.m4, configure: Rebuild with new automake patches.
605 Fri Aug 1 13:02:04 1997 Ian Lance Taylor <ian@cygnus.com>
607 * configure.in: Set enable_shared before AM_PROG_LIBTOOL.
608 * acinclude.m4: Just include acinclude.m4 from BFD.
609 * aclocal.m4, configure: Rebuild.
611 Thu Jul 31 21:44:42 1997 Ian Lance Taylor <ian@cygnus.com>
613 * Makefile.am: New file, based on old Makefile.in.
614 * acconfig.h: New file.
615 * acinclude.m4: New file.
616 * stamp-h.in: New file.
617 * configure.in: Call AM_INIT_AUTOMAKE and AM_PROG_LIBTOOL.
618 Removed shared library handling; now handled by libtool. Replace
619 AC_CONFIG_HEADER with AM_CONFIG_HEADER. Call AM_MAINTAINER_MODE,
620 AM_CYGWIN32, and AM_EXEEXT. Replace AC_PROG_INSTALL with
621 AM_PROG_INSTALL. Change all .o files to .lo. Remove stamp-h
622 handling in AC_OUTPUT.
623 * dep-in.sed: Change .o to .lo.
624 * Makefile.in: Now built with automake.
625 * aclocal.m4: Now built with aclocal.
626 * config.in, configure: Rebuild.
628 Mon Jul 28 21:52:24 1997 Jeffrey A Law (law@cygnus.com)
630 * mips-opc.c: Fix typo/thinko in "eret" instruction.
633 Mon Jul 28 22:07:14 1997 Andrew Cagney <cagney@b1.cygnus.com>
635 * mips-opc.c: Fix coding of mtsa.
638 Thu Jul 24 13:03:26 1997 Doug Evans <dje@canuck.cygnus.com>
640 * sparc-opc.c (sparc_opcodes): Fix spelling on fpaddX, fpsubX insns.
642 * sparc-dis.c (sorted_opcodes): New static local.
643 (struct opcode_hash): `opcode' is pointer to const element.
644 (build_hash): First arg is now table of sorted pointers.
645 (print_insn_sparc): Sort opcodes by sorting table of pointers.
646 (compare_opcodes): Update.
648 Tue Jul 15 12:05:23 1997 Doug Evans <dje@canuck.cygnus.com>
650 * cgen-opc.c: #include <ctype.h>.
651 (hash_keyword_name): New arg `case_sensitive_p'. Callers updated.
652 Handle case insensitive hashing.
653 (hash_keyword_value): Change type of `value' to unsigned int.
655 Thu Jul 10 12:56:10 1997 Jeffrey A Law (law@cygnus.com)
657 * mips-opc.c (mips_builtin_opcodes): If an insn uses single
658 precision FP, mark it as such. Likewise for double precision
659 FP. Mark ISA1 insns. Consolidate duplicate opcodes where
662 (mips_builtin_opcodes): Remove non-existant r5900 instructions
666 Thu Jun 26 16:20:27 1997 Jeffrey A Law (law@cygnus.com)
668 * mips-opc.c (mips_builtin_opcodes): Add "pinteh", "pexeh" and
669 "pexew" as synonyms for "pintoh", "pexoh", "pexow".
672 Wed Jun 25 15:25:57 1997 Felix Lee <flee@cirdan.cygnus.com>
674 * ppc-opc.c (extract_nsi): make unsigned expression signed before
676 (UNUSED): remove one level of parens, so MSVC doesn't choke on
677 nesting depth when all the macros are expanded.
679 Tue Jun 17 17:02:17 1997 Ian Lance Taylor <ian@cygnus.com>
681 * sparc-opc.c: The fcmp v9a instructions take an integer register
682 as a destination, not a floating point register. From Christian
683 Kuehnke <Christian.Kuehnke@arbi.Informatik.Uni-Oldenburg.DE>.
685 Mon Jun 16 14:13:18 1997 Ian Lance Taylor <ian@cygnus.com>
687 * m68k-dis.c (print_insn_arg): Print case 7.2 using %pc@()
688 syntax. From Roman Hodek
689 <rnhodek@faui22c.informatik.uni-erlangen.de>.
691 * i386-dis.c (twobyte_has_modrm): Fix pand.
693 Mon Jun 16 14:08:38 1997 Michael Taylor <mbt@mit.edu>
695 * i386-dis.c (dis386_twobyte): Fix pand and pandn.
697 Tue Jun 10 11:26:47 1997 H.J. Lu <hjl@gnu.ai.mit.edu>
699 * arm-dis.c: Add prototypes for arm_decode_shift and
702 Mon Jun 2 11:39:04 1997 Gavin Koch <gavin@cygnus.com>
704 * mips-opc.c: Add r3900 insns.
706 Tue May 27 15:55:44 1997 Ian Lance Taylor <ian@cygnus.com>
708 * sh-dis.c (print_insn_shx): Change relmask to bfd_vma. Don't
709 print delay slot instructions on the same line. When using a PC
710 relative load, add a comment with the value being loaded if it can
713 Tue May 27 11:02:08 1997 Alan Modra <alan@spri.levels.unisa.edu.au>
715 * i386-dis.c (dis386[], dis386_twobyte[]): change pushl/popl
716 to pushS/popS for segment regs and byte constant so that
717 pushw/popw printed when in 16 bit data mode.
719 * i386-dis.c (dis386[]): change cwtl, cltd to cWtS, cStd to
720 print cbtw, cwtd in 16 bit data mode.
721 * i386-dis.c (putop): extra case W to support above.
723 * i386-dis.c (print_insn_x86): print addr32 prefix when given
724 address size prefix in 16 bit address mode.
726 Fri May 23 16:47:23 1997 Ian Lance Taylor <ian@cygnus.com>
728 * sh-dis.c: Reindent. Rename local variable fprintf to
731 Thu May 22 14:06:02 1997 Doug Evans <dje@canuck.cygnus.com>
733 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Undo patch of May 2.
735 Tue May 20 11:26:27 1997 Gavin Koch <gavin@cygnus.com>
737 * mips-opc.c (mips_builtin_opcodes): Moved INSN_ISA field into new
739 * mips16-opc.c (mip16_opcodes): same.
741 Mon May 12 15:10:53 1997 Jim Wilson <wilson@cygnus.com>
743 * m68k-opc.c (moveb): Change $d to %d.
745 Mon May 5 14:28:41 1997 Ian Lance Taylor <ian@cygnus.com>
747 * i386-dis.c: (dis386_twobyte): Add MMX instructions.
748 (twobyte_has_modrm): Likewise.
750 (OP_MMX, OP_EM, OP_MS): New static functions.
752 * i386-dis.c: Revert patch of April 4. The output now matches
755 Fri May 2 12:48:37 1997 Doug Evans <dje@canuck.cygnus.com>
757 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Use $uimm16 instead
760 Thu May 1 15:34:15 1997 Doug Evans <dje@canuck.cygnus.com>
762 * m32r-opc.h (CGEN_ARCH): Renamed from CGEN_CPU.
764 Tue Apr 15 12:40:08 1997 Ian Lance Taylor <ian@cygnus.com>
766 * Makefile.in (install): Depend upon installdirs.
767 (installdirs): New target.
769 Mon Apr 14 12:13:51 1997 Ian Lance Taylor <ian@cygnus.com>
771 From Thomas Graichen <graichen@rzpd.de>:
772 * configure.in: Use ${CONFIG_SHELL} when running $ac_config_sub.
773 * configure: Rebuild.
775 Sun Apr 13 17:50:41 1997 Doug Evans <dje@canuck.cygnus.com>
777 * cgen-*.c, m32r-*.c: #include sysdep.h instead of config.h.
778 Delete string{,s}.h support.
780 Thu Apr 10 14:44:56 1997 Doug Evans <dje@canuck.cygnus.com>
782 * cgen-asm.c (cgen_parse_operand_fn): New global.
783 (cgen_parse_{{,un}signed_integer,address}): Update call to
784 cgen_parse_operand_fn.
785 (cgen_init_parse_operand): New function.
786 * m32r-asm.c (parse_insn_normal): cgen_init_parse_operand renamed
787 from cgen_asm_init_parse.
788 (m32r_cgen_assemble_insn): New operand `errmsg'.
789 Delete call to as_bad, return error message to caller.
790 (m32r_cgen_asm_hash_keywords): #if 0 out.
792 Wed Apr 9 12:05:25 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
794 * m68k-dis.c (print_insn_arg) [case 'd']: Print as address register,
796 [case 'J']: Fix typo in register name.
798 Mon Apr 7 16:48:22 1997 Ian Lance Taylor <ian@cygnus.com>
800 * configure.in: Substitute SHLIB_LIBS.
801 * configure: Rebuild.
802 * Makefile.in (SHLIB_LIBS): New variable.
803 ($(SHLIB)): Use $(SHLIB_LIBS).
805 Mon Apr 7 11:45:44 1997 Doug Evans <dje@canuck.cygnus.com>
807 * cgen-dis.c (build_dis_hash_table): Fix xmalloc size computation.
809 * cgen-opc.c (hash_keyword_name): Improve algorithm.
811 * disassemble.c (disassembler): Handle m32r.
813 Fri Apr 4 12:29:38 1997 Doug Evans <dje@canuck.cygnus.com>
815 * m32r-asm.c, m32r-dis.c, m32r-opc.c, m32r-opc.h: New files.
816 * cgen-asm.c, cgen-dis.c, cgen-opc.c: New files.
817 * Makefile.in (CFILES): Add them.
818 (ALL_MACHINES): Add them.
819 (dependencies): Regenerate.
820 * configure.in (cgen_files): New variable.
821 (bfd_m32r_arch): Add entry.
822 * configure: Regenerate.
824 Fri Apr 4 14:04:16 1997 Ian Lance Taylor <ian@cygnus.com>
826 * configure.in: Correct file names for bfd_mn10[23]00_arch.
827 * configure: Rebuild.
829 * Makefile.in: Rebuild dependencies.
831 * d10v-dis.c: Include "ansidecl.h" before "opcode/d10v.h".
833 * i386-dis.c (float_reg): Swap fsubrp and fsubp. Swap fdivrp and
836 Thu Apr 3 13:22:45 1997 Ian Lance Taylor <ian@cygnus.com>
838 * Branched binutils 2.8.
840 Wed Apr 2 12:23:53 1997 Ian Lance Taylor <ian@cygnus.com>
842 * m10200-dis.c: Rename from mn10200-dis.c.
843 * m10200-opc.c: Rename from mn10200-opc.c.
844 * m10300-dis.c: Rename from mn10300-dis.c
845 * m10300-opc.c: Rename from mn10300-opc.c.
846 * Makefile.in: Update accordingly.
848 * mips16-opc.c: Add mul and dmul macros.
850 Tue Apr 1 16:27:45 1997 Klaus Kaempf <kkaempf@progis.de>
852 * makefile.vms: Update CFLAGS, add clean target.
854 Fri Mar 28 12:10:09 1997 Ian Lance Taylor <ian@cygnus.com>
856 * mips-opc.c: Add "wait". From Ralf Baechle
857 <ralf@gnu.ai.mit.edu>.
859 * configure.in: Add stdlib.h to AC_CHECK_HEADERS list.
860 * configure, config.in: Rebuild.
861 * sysdep.h: Include <stdlib.h> if it exists.
862 * sparc-dis.c: Include <stdio.h> and "sysdep.h". Don't include
864 * Makefile.in: Rebuild dependencies.
866 Thu Mar 27 14:24:43 1997 Ian Lance Taylor <ian@cygnus.com>
868 * ppc-opc.c: Add PPC 403 instructions and extended opcodes. From
869 Andrew Bray <andy@madhouse.demon.co.uk>.
871 * mips-opc.c: Add cast when setting mips_opcodes.
873 Tue Mar 25 23:04:00 1997 Stu Grossman (grossman@critters.cygnus.com)
875 * v850-dis.c (disassemble): Fix sign extension problem.
876 * v850-opc.c (extract_d*): Fix sign extension problems to make
877 disassembly calculate branch offsets correctly.
879 Mon Mar 24 13:22:13 1997 Ian Lance Taylor <ian@cygnus.com>
881 * sh-opc.h: Add bf/s and bt/s as synonyms for bf.s and bt.s.
883 * mips-opc.c: Add dctr and dctw.
886 Sun Mar 23 18:08:10 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
888 * d30v-dis.c (print_insn): Change the way signed constants
891 Fri Mar 21 14:37:52 1997 Ian Lance Taylor <ian@cygnus.com>
893 * Makefile.in (BFD_H): New variable.
894 (HFILES): New variable.
895 (CFILES): Add all C files.
896 (.dep, .dep1, dep.sed, dep, dep-in): New targets.
897 Delete old dependencies, and build new ones.
898 * dep-in.sed: New file.
900 Thu Mar 20 19:03:30 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
902 * m68k-opc.c (m68k_opcode_aliases): Added blo and blo{s,b,w,l}.
904 start-sanitize-coldfire
905 Wed Mar 19 06:53:58 1997 J.T. Conklin <jtc@rtl.cygnus.com>
907 * m68k-opc.c (m68k_opcodes): Provide coldfire division module
910 end-sanitize-coldfire
911 Tue Mar 18 14:17:03 1997 Jeffrey A Law (law@cygnus.com)
913 * mn10200-opc.c: Change "trap" to "syscall".
914 * mn10300-opc.c: Add new "syscall" instruction.
916 Mon Mar 17 08:48:03 1997 J.T. Conklin <jtc@beauty.cygnus.com>
918 * m68k-opc.c (m68k_opcodes): Provide correct entries for mulsl and
919 mulul insns on the coldfire.
921 Sat Mar 15 17:13:05 1997 Ian Lance Taylor <ian@cygnus.com>
923 * arm-dis.c (print_insn_arm): Don't print instruction bytes.
924 (print_insn_big_arm): Set bytes_per_chunk and display_endian.
925 (print_insn_little_arm): Likewise.
927 Fri Mar 14 15:08:59 1997 Ian Lance Taylor <ian@cygnus.com>
929 Based on patches from H.J. Lu <hjl@lucon.org>:
930 * i386-dis.c (fetch_data): Add prototype.
931 * m68k-dis.c (fetch_data): Add prototype.
932 (dummy_print_address): Add prototype. Make static.
933 * ppc-opc.c (valid_bo): Add prototype.
934 * sparc-dis.c (build_hash_table): Add prototype.
935 (is_delayed_branch, compute_arch_mask): Add prototypes.
936 (print_insn_sparc): Make several local variables const.
937 (compare_opcodes): Change arguments to const PTR. Add prototype.
938 * sparc-opc.c (arg): Change name field to be const.
939 (lookup_name, lookup_value): Add prototypes. Change table and
940 name parameters to be const.
941 (sparc_encode_asi): Change name parameter to be const.
942 (sparc_encode_membar, sparc_encode_prefetch): Likewise.
943 (sparc_encode_sparclet_cpreg): Likewise.
944 (sparc_decode_asi): Change return type to be const.
945 (sparc_decode_membar, sparc_decode_prefetch): Likewise.
946 (sparc_decode_sparclet_cpreg): Likewise.
948 Fri Mar 7 10:51:49 1997 Ian Lance Taylor <ian@cygnus.com>
950 * Makefile.in ($(SHLINK)): Just use ln -s, not ln -sf, since
951 Solaris doesn't like the combined options, and the -f is
953 (stamp-tshlink, install): Likewise.
955 Thu Mar 6 16:51:11 1997 Jeffrey A Law (law@cygnus.com)
957 * mn10300-opc.c (IMM16_PCREL, SD8N_PCREL, D16_SHIFT): Mark these
960 Tue Mar 4 06:10:36 1997 J.T. Conklin <jtc@cygnus.com>
962 * m68k-opc.c (m68k_opcodes): Fix last change for the mc68010.
964 Mon Mar 3 07:45:20 1997 J.T. Conklin <jtc@cygnus.com>
966 * m68k-opc.c (m68k_opcodes): Added entries for the tst insns on
969 Thu Feb 27 14:04:32 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
971 * m68k-opc.c (m68k_opcodes): Added swbegl pseudo-instruction.
974 Thu Feb 27 11:36:41 1997 Michael Meissner <meissner@cygnus.com>
976 * tic80-dis.c (print_insn_tic80): Set info->bytes_per_line to 8.
978 Wed Feb 26 15:34:48 1997 Michael Meissner <meissner@cygnus.com>
980 * tic80-opc.c (tic80_predefined_symbols): Define r25 properly.
983 Wed Feb 26 13:38:30 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
985 * m68k-dis.c (NEXTSINGLE, NEXTDOUBLE, NEXTEXTEND): Use
986 floatformat_to_double to make portable.
987 (print_insn_arg): Use NEXTEXTEND macro when extracting extended
990 Mon Feb 24 19:26:12 1997 Dawn Perchik <dawn@cygnus.com>
992 * mips-opc.c: Initialize mips_opcodes to mips_builtin_opcodes,
993 and bfd_mips_num_opcodes to bfd_mips_num_builtin_opcodes.
995 Mon Feb 24 15:19:01 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
997 * d10v-dis.c, d10v-opc.c: Change pre_defined_registers to
998 d10v_predefined_registers and reg_name_cnt to d10v_reg_name_cnt.
1000 start-sanitize-tic80
1001 Mon Feb 24 14:33:26 1997 Fred Fish <fnf@cygnus.com>
1003 * tic80-opc.c (LSI_SCALED): Renamed from this ...
1004 (OFF_SL_BR_SCALED): ... to this, and added the flag
1005 TIC80_OPERAND_BASEREL to the flags word.
1006 (tic80_opcodes): Replace all occurances of LSI_SCALED with
1010 Sat Feb 22 21:25:00 1997 Dawn Perchik <dawn@cygnus.com>
1012 * mips-opc.c: Add macros for cop0, cop1 cop2 and cop3.
1013 Change mips_opcodes from const array to a pointer,
1014 and change bfd_mips_num_opcodes from const int to int,
1015 so that we can increase the size of the mips opcodes table
1018 start-sanitize-tic80
1019 Sat Feb 22 21:03:47 1997 Fred Fish <fnf@cygnus.com>
1021 * tic80-opc.c (tic80_predefined_symbols): Revert change to
1022 store BITNUM values in the table in one's complement form
1023 to match behavior when assembler is given a raw numeric
1024 value for a BITNUM operand.
1025 * tic80-dis.c (print_operand_bitnum): Ditto.
1029 Fri Feb 21 16:31:18 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
1031 * d30v-opc.c: Removed references to FLAG_X.
1034 Wed Feb 19 14:51:20 1997 Ian Lance Taylor <ian@cygnus.com>
1036 * Makefile.in: Add dependencies on ../bfd/bfd.h as required.
1039 Tue Feb 18 17:43:43 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
1041 * Makefile.in: Added d30v object files.
1042 * configure: (bfd_d30v_arch) Rebuilt.
1043 * configure.in: (bfd_d30v_arch) Added new case.
1044 * d30v-dis.c: New file.
1045 * d30v-opc.c: New file.
1046 * disassemble.c (disassembler) Add entry for d30v.
1049 start-sanitize-tic80
1050 Tue Feb 18 16:32:08 1997 Fred Fish <fnf@cygnus.com>
1052 * tic80-opc.c (tic80_predefined_symbols): Add symbolic
1053 representations for the floating point BITNUM values.
1055 Fri Feb 14 12:14:05 1997 Fred Fish <fnf@cygnus.com>
1057 * tic80-opc.c (tic80_predefined_symbols): Store BITNUM values
1058 in the table in one's complement form, as they appear in the
1060 (tic80_symbol_to_value): Use macros to access predefined
1062 (tic80_value_to_symbol): Ditto.
1063 (tic80_next_predefined_symbol): New function.
1064 * tic80-dis.c (print_operand_bitnum): Remove code that did
1065 one's complement for BITNUM values.
1068 start-sanitize-r5900
1069 Fri Feb 14 13:56:51 1997 Gavin Koch <gavin@cygnus.com>
1071 * mips-opc.c: bug fix, can't mark insns INSN_5900 and INSN_ISA4
1074 Thu Feb 13 21:56:51 1997 Klaus Kaempf <kkaempf@progis.de>
1076 * makefile.vms: Remove 8 bit characters. Update to latest
1079 Thu Feb 13 20:41:22 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
1081 * m68k-opc.c (m68k_opcodes): Add swbeg pseudo-instruction.
1083 Thu Feb 13 16:30:02 1997 Jeffrey A Law (law@cygnus.com)
1085 * mn10200-opc.c (IMM16_PCREL): This is a signed operand.
1086 (IMM24_PCREL): Likewise.
1088 Thu Feb 13 13:28:43 1997 Ian Lance Taylor <ian@cygnus.com>
1090 * mips-dis.c (print_mips16_insn_arg): Use memaddr - 2 as the base
1091 address for an extended PC relative instruction that is not a
1094 Wed Feb 12 12:27:40 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1096 * m68k-dis.c (print_insn_m68k): Set bytes_per_chunk and
1099 start-sanitize-tic80
1100 Tue Feb 11 16:36:31 1997 Fred Fish <fnf@cygnus.com>
1102 * tic80-opc.c (tic80_operands): Fix typo '+' -> '|'.
1103 (tic80_opcodes): Sort entries so that long immediate forms
1104 come after short immediate forms, making it easier for
1105 assembler to select the right one for a given operand.
1108 Tue Feb 11 15:26:47 1997 Ian Lance Taylor <ian@cygnus.com>
1110 * mips-dis.c (_print_insn_mips): Set bytes_per_chunk and
1112 (print_insn_mips16): Likewise.
1114 start-sanitize-r5900
1115 Fri Feb 7 11:12:44 1997 Gavin Koch <gavin@cygnus.com>
1117 * mips-opc.c: add r5900.
1120 start-sanitize-tic80
1121 Mon Feb 10 10:12:41 1997 Fred Fish <fnf@cygnus.com>
1123 * tic80-opc.c (tic80_symbol_to_value): Changed to accept
1124 a symbol class that restricts translation to just that
1125 class (general register, condition code, etc).
1127 Thu Feb 6 17:34:09 1997 Fred Fish <fnf@cygnus.com>
1129 * tic80-opc.c (tic80_operands): Add REG_0_E, REG_22_E,
1130 and REG_DEST_E for register operands that have to be
1131 an even numbered register. Add REG_FPA for operands that
1132 are one of the floating point accumulator registers.
1133 Add TIC80_OPERAND_MASK to flags for ENDMASK operand.
1134 (tic80_opcodes): Change entries that need even numbered
1135 register operands to use the new operand table entries.
1136 Add "or" entries that are identical to "or.tt" entries.
1139 Wed Feb 5 11:12:44 1997 Ian Lance Taylor <ian@cygnus.com>
1141 * mips16-opc.c: Add new cases of exit instruction for
1143 * mips-dis.c (print_mips16_insn_arg): Display floating point
1144 registers in operands of exit instruction. Print `$' before
1145 register names in operands of entry and exit instructions.
1147 start-sanitize-tic80
1148 Thu Jan 30 14:09:03 1997 Fred Fish <fnf@cygnus.com>
1150 * tic80-opc.c (tic80_predefined_symbols): Table of name/value
1151 pairs for all predefined symbols recognized by the assembler.
1152 Also used by the disassembling routines.
1153 (tic80_symbol_to_value): New function.
1154 (tic80_value_to_symbol): New function.
1155 * tic80-dis.c (print_operand_control_register,
1156 print_operand_condition_code, print_operand_bitnum):
1157 Remove private tables and use tic80_value_to_symbol function.
1160 Thu Jan 30 11:30:45 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
1162 * d10v-dis.c (print_operand): Change address printing
1163 to correctly handle PC wrapping. Fixes PR11490.
1165 Wed Jan 29 09:39:17 1997 Jeffrey A Law (law@cygnus.com)
1167 * mn10200-opc.c (mn10200_operands): Make 8 and 16 bit pc-relative
1170 Tue Jan 28 15:57:34 1997 Ian Lance Taylor <ian@cygnus.com>
1172 * mips-dis.c (print_insn_mips16): Set insn_info information.
1173 (print_mips16_insn_arg): Likewise.
1175 * mips-dis.c (print_insn_mips16): Better handling of an extend
1176 opcode followed by an instruction which can not be extended.
1178 Fri Jan 24 12:08:21 1997 J.T. Conklin <jtc@cygnus.com>
1180 * m68k-opc.c (m68k_opcodes): Changed operand specifier for the
1181 coldfire moveb instruction to not allow an address register as
1182 destination. Although the documentation does not indicate that
1183 this is invalid, experiments uncovered unexpected behavior.
1184 Added a comment explaining the situation. Thanks to Andreas
1185 Schwab for pointing this out to me.
1187 start-sanitize-tic80
1188 Wed Jan 22 20:13:51 1997 Fred Fish <fnf@cygnus.com>
1190 * tic80-opc.c (tic80_opcodes): Expand comment to note that the
1191 entries are presorted so that entries with the same mnemonic are
1192 adjacent to each other in the table. Sort the entries for each
1193 instruction so that this is true.
1196 Mon Jan 20 12:48:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1198 * m68k-dis.c: Include <libiberty.h>.
1199 (print_insn_m68k): Sort the opcode table on the most significant
1200 nibble of the opcode.
1202 start-sanitize-tic80
1203 Sat Jan 18 15:15:05 1997 Fred Fish <fnf@cygnus.com>
1205 * tic80-dis.c (tic80_opcodes): Add "wrcr", "vmpy", "vrnd",
1206 "vsub", "vst", "xnor", and "xor" instructions.
1207 (V_a1): Renamed from V_a, msb of accumulator reg number.
1208 (V_a0): Add macro, lsb of accumulator reg number.
1210 Fri Jan 17 18:24:31 1997 Fred Fish <fnf@cygnus.com>
1212 * tic80-dis.c (print_insn_tic80): Broke excessively long
1213 function up into several smaller ones and arranged for
1214 the instruction printing function to be callable recursively
1215 to print vector instructions that have both a load and a
1216 math instruction packed into a single opcode.
1217 * tic80-opc.c (tic80_opcodes): Expand comment for vld opcode
1218 to explain why it comes after the other vector opcodes.
1221 Fri Jan 17 16:19:15 1997 J.T. Conklin <jtc@beauty.cygnus.com>
1223 * m68k-opc.c (m68k_opcodes): add b, w, or l specifier to coldfire
1224 move insns to handle immediate operands.
1226 Thu Jan 17 16:19:00 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1228 * m68k-opc.c (m68k_opcodes): Delete duplicate entry for "cmpil".
1229 fix operand mask in the "moveml" entries for the coldfire.
1231 start-sanitize-tic80
1232 Thu Jan 16 20:54:40 1997 Fred Fish <fnf@cygnus.com>
1234 * tic80-opc.c (V_a, V_m, V_S, V_Z, V_p, OP_V, MASK_V):
1235 New macros for building vector instruction opcodes.
1236 (tic80_opcodes): Remove all uses of FMT_SI, FMT_REG, and
1237 FMT_LI, which were unused. The field is now a flags field.
1238 Remove some opcodes that are possible, but illegal, such
1239 as long immediate instructions with doubles for immediate
1240 values. Add "vadd" and "vld" instructions.
1242 Wed Jan 15 18:59:51 1997 Fred Fish <fnf@cygnus.com>
1244 * tic80-opc.c (tic80_operands): Reorder some table entries to make
1245 the order more logical. Move the shift alias instructions ("rotl",
1246 "shl", "ins", "rotr", "extu", "exts", "srl", and "sra" to be
1247 interspersed with the regular sr.x and sl.x instructions. Add
1248 and test new instruction opcodes for "sl", "sli", "sr", "sri", "st",
1249 "sub", "subu", "swcr", and "trap".
1251 Tue Jan 14 19:42:50 1997 Fred Fish <fnf@cygnus.com>
1253 * tic80-opc.c (OFF_SS_PC): Renamed from OFF_SS.
1254 (OFF_SL_PC): Renamed from OFF_SL.
1255 (OFF_SS_BR): New operand type for base relative operand.
1256 (OFF_SL_BR): New operand type for base relative operand.
1257 (REG_BASE): New operand type for base register operand.
1258 (tic80_opcodes): Add and test "fmpy", "frndm", "frndn", "frndp",
1259 "frndz", "fsqrt", "fsub", "illop0", "illopF", "ins", "jsr",
1260 "ld", "ld.u", "lmo", "or", "rdcr", "rmo", "rotl", and "rotr"
1262 * tic80-dis.c (print_insn_tic80): Print opcode name with fixed width
1263 10 char field, padded with spaces on rhs, rather than a string
1264 followed by a tab. Use renamed TIC80_OPERAND_PCREL flag bit rather
1265 than old TIC80_OPERAND_RELATIVE. Add support for new
1266 TIC80_OPERAND_BASEREL flag bit.
1268 Mon Jan 13 15:58:56 1997 Fred Fish <fnf@cygnus.com>
1270 * tic80-dis.c (print_insn_tic80): Print floating point operands
1272 * tic80-opc.c (SPFI): Add single precision floating point
1273 immediate operand type.
1274 (ROTATE): Add rotate operand type for shifts.
1275 (ENDMASK): Add for shifts.
1276 (n): Macro for the 'n' bit.
1277 (i): Macro for the 'i' bit.
1278 (PD): Macro for the 'PD' field.
1279 (P2): Macro for the 'P2' field.
1280 (P1): Macro for the 'P1' field.
1281 (tic80_opcodes): Add entries for "exts", "extu", "fadd",
1285 Mon Jan 6 15:06:55 1997 Jeffrey A Law (law@cygnus.com)
1287 * mn10200-dis.c (disassemble): Mask off unwanted bits after
1288 adding in current address for pc-relative operands.
1290 start-sanitize-tic80
1291 Mon Jan 6 10:56:25 1997 Fred Fish <fnf@cygnus.com>
1293 * tic80-dis.c (R_SCALED): Add macro to test for ":s" modifier bit.
1294 (print_insn_tic80): If R_SCALED then print ":s" modifier for operand.
1295 * tic80-opc.c (REG0, REG22, REG27, SSOFF, LSOFF): Names
1296 changed to REG_0, REG_22, REG_DEST, OFF_SS, OFF_SL respectively.
1297 (SICR, LICR, REGM_SI, REGM_LI): Names changed to CR_SI, CR_LI,
1298 REG_BASE_M_SI, REG_BASE_M_LI respectively.
1299 (REG_SCALED, LSI_SCALED): New operand types.
1300 (E): New macro for 'E' bit at bit 27.
1301 (tic80_opcodes): Add and test dld, dld.u, dst, estop, and etrap
1302 opcodes, including the various size flavors (b,h,w,d) for
1303 the direct load and store instructions.
1305 Sun Jan 5 12:18:14 1997 Fred Fish <fnf@cygnus.com>
1307 * tic80-dis.c (M_SI, M_LI): Add macros to test for ":m" modifier bit
1309 * tic80-dis.c (print_insn_tic80): Change comma and paren handling.
1310 Use M_SI and M_LI macros to check for ":m" modifier for GPR operands.
1311 * tic80-opc.c (tic80_operands): Add REGM_SI and REGM_LI operands.
1312 (F, M_REG, M_LI, M_SI, SZ_REG, SZ_LI, SZ_SI, D, S): New bit-twiddlers.
1313 (MASK_LI_M, MASK_SI_M, MASK_REG_M): Remove and replace in opcode
1314 masks with "MASK_* & ~M_*" to get the M bit reset.
1315 (tic80_opcodes): Add bsr, bsr.a, cmnd, cmp, dcachec, and dcachef.
1317 Sat Jan 4 19:05:05 1997 Fred Fish <fnf@cygnus.com>
1319 * tic80-dis.c (print_insn_tic80): Print TIC80_OPERAND_RELATIVE
1320 correctly. Add support for printing TIC80_OPERAND_BITNUM and
1321 TIC80_OPERAND_CC, and TIC80_OPERAND_CR operands in symbolic
1323 * tic80-opc.c (tic80_operands): Add SSOFF, LSOFF, BITNUM,
1324 CC, SICR, and LICR table entries.
1325 (tic80_opcodes): Add and test "nop", "br", "bbo", "bbz",
1326 "bcnd", and "brcr" opcodes.
1329 Fri Jan 3 18:32:11 1997 Fred Fish <fnf@cygnus.com>
1331 * ppc-opc.c (powerpc_operands): Make comment match the
1332 actual fields (no shift field).
1333 * sparc-opc.c (sparc_opcodes): Document why this cannot be "const".
1334 start-sanitize-tic80
1335 * tic80-dis.c (print_insn_tic80): Replace abort stub with a
1336 partial implementation, work in progress.
1337 * tic80-opc.c (tic80_operands): Begin construction operands table.
1338 (tic80_opcodes): Continue populating opcodes table and start
1339 filling in the operand indices.
1340 (tic80_num_opcodes): Add this.
1343 Fri Jan 3 12:13:52 1997 Ian Lance Taylor <ian@cygnus.com>
1345 * m68k-opc.c: Add #B case for moveq.
1347 Thu Jan 2 12:14:29 1997 Jeffrey A Law (law@cygnus.com)
1349 * mn10300-dis.c (disassemble): Make sure all variables are initialized
1350 before they are used.
1352 Tue Dec 31 12:20:38 1996 Jeffrey A Law (law@cygnus.com)
1354 * v850-opc.c (v850_opcodes): Put curly-braces around operands
1355 for "breakpoint" instruction.
1357 Tue Dec 31 15:38:13 1996 Ian Lance Taylor <ian@cygnus.com>
1359 * Makefile.in (ALL_CFLAGS): Add -D_GNU_SOURCE.
1360 (dep): Use ALL_CFLAGS rather than CFLAGS.
1362 Tue Dec 31 15:09:16 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1364 * v850-opc.c (D8_{6,7}): Set V850_OPERAND_ADJUST_SHORT_MEMORY
1367 Mon Dec 30 17:02:11 1996 Fred Fish <fnf@cygnus.com>
1369 * Makefile.in (m68k-opc.o, alpha-opc.o): Remove dis-asm.h dependency.
1370 start-sanitize-tic80
1371 (tic80-dis.o, tic80-opc.o): Add rules per comment in Makefile.in.
1374 Mon Dec 30 11:38:01 1996 Ian Lance Taylor <ian@cygnus.com>
1376 * mips16-opc.c: Add "abs".
1378 start-sanitize-tic80
1379 Sun Dec 29 10:58:22 1996 Fred Fish <fnf@cygnus.com>
1381 * Makefile.in (ALL_MACHINES): Add tic80-dis.o and tic80-opc.o.
1382 * disassemble.c (ARCH_tic80): Define if ARCH_all is defined.
1383 (disassembler): Add bfd_arch_tic80 support to set disassemble
1384 to print_insn_tic80.
1385 * tic80-dis.c (print_insn_tic80): Add stub.
1387 Fri Dec 27 22:30:57 1996 Fred Fish <fnf@cygnus.com>
1389 * configure.in (arch in $selarchs): Add bfd_tic80_arch entry.
1390 * configure: Regenerate with autoconf.
1391 * tic80-dis.c: Add file.
1392 * tic80-opc.c: Add file.
1395 Fri Dec 20 14:30:19 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1397 * d10v-opc.c (pre_defined_registers): Add cr[0-15], dpc, dpsw, link.
1399 Mon Dec 16 13:00:15 1996 Jeffrey A Law (law@cygnus.com)
1401 * mn10200-opc.c (mn10200_operands): Add SIMM16N.
1402 (mn10200_opcodes): Use it for some logicals and btst insns.
1403 Add "break" and "trap" instructions.
1405 * mn10300-opc.c (mn10300_opcodes): Add "break" instruction.
1407 * mn10200-opc.c: Add pseudo-ops for "mov (an),am" and "mov an,(am)".
1409 Sat Dec 14 22:36:20 1996 Ian Lance Taylor <ian@cygnus.com>
1411 * mips-dis.c (print_mips16_insn_arg): The base address of a PC
1412 relative load or add now depends upon whether the instruction is
1415 Wed Dec 11 09:23:46 1996 Jeffrey A Law (law@cygnus.com)
1417 * mn10200-dis.c: Finish writing disassembler.
1418 * mn10200-opc.c (mn10200_opcodes): Fix mask for "mov imm8,dn".
1419 Fix mask for "jmp (an)".
1421 * mn10300-dis.c (disassemble, print_insn_mn10300): Corrently
1422 handle endianness issues for mn10300.
1424 * mn10200-opc.c (mn10200_opcodes): Fix operands for "movb dm,(an)".
1426 Tue Dec 10 12:08:05 1996 Jeffrey A Law (law@cygnus.com)
1428 * mn10200-opc.c (mn10200_opcodes): "mov imm8,d0" is a format 2
1429 instruction. Fix opcode field for "movb (imm24),dn".
1431 * mn10200-opc.c (mn10200_operands): Fix insertion position
1434 Mon Dec 9 16:42:43 1996 Jeffrey A Law (law@cygnus.com)
1436 * mn10200-opc.c: Create mn10200 opcode table.
1437 * mn10200-dis.c: Flesh out mn10200 disassembler. Not ready,
1438 but moving along nicely.
1440 Sun Dec 8 04:28:31 1996 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1442 * Makefile.in (ALL_MACHINES): Add mips16-opc.o.
1444 Fri Dec 6 16:47:40 1996 J.T. Conklin <jtc@rhino.cygnus.com>
1446 * m68k-opc.c (m68k_opcodes): Revert change to use < and >
1447 specifiers for fmovem* instructions.
1449 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
1451 * mn10300-dis.c (disassemble): Remove '$' register prefixing.
1453 Fri Dec 6 17:34:39 1996 Ian Lance Taylor <ian@cygnus.com>
1455 * mips16-opc.c: Change opcode for entry/exit to avoid conflicting
1458 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
1460 * mn10300-opc.c: Add some comments explaining the various
1463 * mn10300-dis.c (disassemble): Fix minor gcc -Wall warnings.
1465 Thu Dec 5 12:09:48 1996 J.T. Conklin <jtc@rtl.cygnus.com>
1467 * m68k-dis.c (print_insn_arg): Handle new < and > operand
1470 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
1471 operand specifiers in fmovm* instructions.
1473 Wed Dec 4 14:52:18 1996 Ian Lance Taylor <ian@cygnus.com>
1475 * ppc-opc.c (insert_li): Give an error if the offset has the two
1476 least significant bits set.
1478 Wed Nov 27 13:09:01 1996 Ian Lance Taylor <ian@cygnus.com>
1480 * mips-dis.c (print_insn_mips16): Separate the instruction from
1481 the arguments with a tab, not a space.
1483 Tue Nov 26 13:24:17 1996 Jeffrey A Law (law@cygnus.com)
1485 * mn10300-dis.c (disasemble): Finish conversion to '$' as
1488 * mn10300-opc.c (mn10300_opcodes): Fix mask field for
1491 Tue Nov 26 10:53:21 1996 Ian Lance Taylor <ian@cygnus.com>
1493 * configure: Rebuild with autoconf 2.12.
1495 Add support for mips16 (16 bit MIPS implementation):
1496 * mips16-opc.c: New file.
1497 * mips-dis.c: Include "elf-bfd.h" and "elf/mips.h".
1498 (mips16_reg_names): New static array.
1499 (print_insn_big_mips): Use print_insn_mips16 in 16 bit mode or
1500 after seeing a 16 bit symbol.
1501 (print_insn_little_mips): Likewise.
1502 (print_insn_mips16): New static function.
1503 (print_mips16_insn_arg): New static function.
1504 * mips-opc.c: Add jalx instruction.
1505 * Makefile.in (mips16-opc.o): New target.
1506 * configure.in: Use mips16-opc.o for bfd_mips_arch.
1507 * configure: Rebuild.
1509 Mon Nov 25 16:15:17 1996 J.T. Conklin <jtc@cygnus.com>
1511 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
1512 operand specifiers in *save, *restore and movem* instructions.
1514 * m68k-opc.c (m68k_opcodes): Fix move and movem instructions for
1517 * m68k-opc.c (m68k_opcodes): The coldfire (mcf5200) can only use
1518 register operands for immediate arithmetic, not, neg, negx, and
1519 set according to condition instructions.
1521 * m68k-opc.c (m68k_opcodes): Consistantly Use "s" as the storage
1522 specifier of the effective-address operand in immediate forms of
1523 arithmetic instructions. The specifier for the immediate operand
1524 notes how and where the constant will be stored.
1526 Mon Nov 25 11:17:01 1996 Jeffrey A Law (law@cygnus.com)
1528 * mn10300-opc.c (mn10300_opcodes): Remove redundant "lcc"
1531 * mn10300-dis.c (disassemble): Use '$' instead of '%' for
1534 * mn10300-dis.c (disassemble): Prefix registers with '%'.
1536 Wed Nov 20 10:37:13 1996 Jeffrey A Law (law@cygnus.com)
1538 * mn10300-dis.c (disassemble): Handle register lists.
1540 * mn10300-opc.c: Fix handling of register list operand for
1541 "call", "ret", and "rets" instructions.
1543 * mn10300-dis.c (disassemble): Print PC-relative and memory
1544 addresses symbolically if possible.
1545 * mn10300-opc.c: Distinguish between absolute memory addresses,
1546 pc-relative offsets & random immediates.
1548 * mn10300-dis.c (print_insn_mn10300): Fix fetch of last byte
1550 (disassemble): Handle SPLIT and EXTENDED operands.
1552 Tue Nov 19 13:33:01 1996 Jeffrey A Law (law@cygnus.com)
1554 * mn10300-dis.c: Rough cut at printing some operands.
1556 * mn10300-dis.c: Start working on disassembler support.
1557 * mn10300-opc.c (mn10300_opcodes): Fix masks on several insns.
1559 * mn10300-opc.c (mn10300_operands): Add "REGS" for a register
1561 (mn10300_opcodes): Use REGS for register list in "movm" instructions.
1563 Mon Nov 18 15:20:35 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1565 * d10v-opc.c (d10v_opcodes): Add3 sets the carry.
1567 Fri Nov 15 13:43:19 1996 Jeffrey A Law (law@cygnus.com)
1569 * mn10300-opc.c (mn10300_opcodes): Demand parens around
1570 register argument is calls and jmp instructions.
1572 Thu Nov 7 00:26:05 1996 Jeffrey A Law (law@cygnus.com)
1574 * mn10300-opc.c (mn10300_opcodes): Use DN01 for putx and
1575 getx operand. Fix opcode for mulqu imm,dn.
1577 Wed Nov 6 13:42:32 1996 Jeffrey A Law (law@cygnus.com)
1579 * mn10300-opc.c (mn10300_operands): Hijack "bits" field
1580 in MN10300_OPERAND_SPLIT operands for how many bits
1581 appear in the basic insn word. Add IMM32_HIGH24,
1582 IMM32_HIGH24_LOWSHIFT8, IMM8E_SHIFT8.
1583 (mn10300_opcodes): Use new operands as needed.
1585 * mn10300-opc.c (mn10300_operands): Add IMM32_LOWSHIFT8
1586 for bset, bclr, btst instructions.
1587 (mn10300_opcodes): Use new IMM32_LOWSHIFT8 as needed.
1589 * mn10300-opc.c (mn10300_operands): Remove many redundant
1590 operands. Update opcode table as appropriate.
1591 (IMM32): Add MN10300_OPERAND_SPLIT flag.
1592 (mn10300_opcodes): Fix single bit error in mov imm32,dn insn.
1594 Tue Nov 5 13:26:58 1996 Jeffrey A Law (law@cygnus.com)
1596 * mn10300-opc.c (mn10300_operands): Add DN2, DM2, AN2, AM2
1597 operands (for indexed load/stores). Fix bitpos for DI
1598 operand. Add SN8N_SHIFT8, IMM8_SHIFT8, and D16_SHIFT for the
1599 few instructions that insert immediates/displacements in the
1600 middle of the instruction. Add IMM8E for 8 bit immediate in
1601 the extended part of an instruction.
1602 (mn10300_operands): Use new opcodes as appropriate.
1604 Tue Nov 5 10:30:51 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1606 * d10v-opc.c (d10v_opcodes): Declare the trap instruction
1607 sequential so the assembler never parallelizes it with
1610 Mon Nov 4 12:50:40 1996 Jeffrey A Law (law@cygnus.com)
1612 * mn10300-opc.c (mn10300_operands): Add DN01 and AN01 for
1613 a data/address register that appears in register field 0
1614 and register field 1.
1615 (mn10300_opcodes): Use DN01 and AN01 for mov/cmp imm8,DN/AN
1617 Fri Nov 1 10:29:11 1996 Richard Henderson <rth@tamu.edu>
1619 * alpha-dis.c (print_insn_alpha): Use new NOPAL mask for
1620 standard disassembly.
1622 * alpha-opc.c (alpha_operands): Rearrange flags slot.
1623 (alpha_opcodes): Add new BWX, CIX, and MAX instructions.
1624 Recategorize PALcode instructions.
1626 Wed Oct 30 16:46:58 1996 Jeffrey A Law (law@cygnus.com)
1628 * v850-opc.c (v850_opcodes): Add relaxing "jbr".
1630 Tue Oct 29 16:30:28 1996 Ian Lance Taylor <ian@cygnus.com>
1632 * mips-dis.c (_print_insn_mips): Don't print a trailing tab if
1633 there are no operand types.
1635 Tue Oct 29 12:22:21 1996 Jeffrey A Law (law@cygnus.com)
1637 * v850-opc.c (D9_RELAX): Renamed from D9, all references
1639 (v850_operands): Make sure D22 immediately follows D9_RELAX.
1641 Fri Oct 25 12:12:53 1996 Ian Lance Taylor <ian@cygnus.com>
1643 * i386-dis.c (print_insn_x86): Set info->bytes_per_line to 5.
1645 Thu Oct 24 17:53:52 1996 Jeffrey A Law (law@cygnus.com)
1647 * v850-opc.c (insert_d8_6): Fix operand insertion for sld.w
1648 and sst.w instructions.
1650 * v850-opc.c (v850_opcodes): Add "jCC" instructions (aliases for
1653 Thu Oct 24 17:21:20 1996 Ian Lance Taylor <ian@cygnus.com>
1655 * mips-dis.c (_print_insn_mips): Use a tab between the instruction
1658 Tue Oct 22 23:32:56 1996 Ian Lance Taylor <ian@cygnus.com>
1660 * ppc-opc.c (PPCPWR2): Define.
1661 (powerpc_opcodes): Use PPCPWR2 for fsqrt, rather than duplicating
1664 Fri Oct 11 16:03:49 1996 Jeffrey A Law (law@cygnus.com)
1666 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode
1667 field for movhu instruction.
1669 * v850-dis.c (disassemble): For V850_OPERAND_SIGNED operands,
1670 cast value to "long" not "signed long" to keep hpux10
1673 Thu Oct 10 10:25:58 1996 Jeffrey A Law (law@cygnus.com)
1675 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode field
1678 * mn10300-opc.c (FMT*): Remove definitions.
1680 * mn10300-opc.c (mn10300_opcodes): Fix destination register
1681 for shift-by-register opcodes.
1683 * mn10300-opc.c (mn10300_operands): Break DN, DM, AN, AM
1684 into [AD][MN][01] for encoding the position of the register
1687 Wed Oct 9 11:19:26 1996 Jeffrey A Law (law@cygnus.com)
1689 * mn10300-opc.c (mn10300_opcodes): Add "extended" instructions,
1690 "putx", "getx", "mulq", "mulqu", "sat16", "sat24", "bsch".
1692 Tue Oct 8 11:55:35 1996 Jeffrey A Law (law@cygnus.com)
1694 * mn10300-opc.c (mn10300_operands): Remove "REGS" operand.
1695 Fix various typos. Add "PAREN" operand.
1696 (MEM, MEM2): Define.
1697 (mn10300_opcodes): Surround all memory addresses with "PAREN"
1698 operands. Fix several typos.
1700 * mn10300-opc.c (mn10300_opcodes): Fix typos in yesterday's
1703 Mon Oct 7 16:48:45 1996 Jeffrey A Law (law@cygnus.com)
1705 * mn10300-opc.c (FMT_XX): Renumber starting at one.
1706 (mn10300_operands): Rough cut. Enough to parse "mov" instructions
1708 (mn10300_opcodes): Break opcode format out into its own field.
1709 Update many operand fields to deal with signed vs unsigned
1710 issues. Fix one or two typos in the "mov" instruction
1711 opcode, mask and/or operand fields.
1713 Mon Oct 7 11:39:49 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1715 * m68k-opc.c (plusha): Prefer encoding for m68040up, in case
1716 m68851 wasn't reset.
1718 Thu Oct 3 17:17:02 1996 Ian Lance Taylor <ian@cygnus.com>
1720 * mn10300-opc.c (mn10300_opcodes): Add opcode & masks for
1721 all opcodes. Very rough cut at operands for all opcodes.
1723 * mn10300-opc.c (mn10300_opcodes): Start fleshing out the
1726 Thu Oct 3 10:06:07 1996 Jeffrey A Law (law@cygnus.com)
1728 * mn10200-opc.c, mn10300-opc.c: New files.
1729 * mn10200-dis.c, mn10300-dis.c: New files.
1730 * mn10x00-opc.c, mn10x00-dis.c: Deleted.
1731 * disassemble.c: Break mn10x00 support into 10200 and 10300
1733 * configure.in: Likewise.
1734 * configure: Rebuilt.
1736 Thu Oct 3 15:59:12 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
1738 * Makefile.in (MOSTLYCLEAN): Move config.log to distclean.
1740 Wed Oct 2 23:28:42 1996 Jeffrey A Law (law@cygnus.com)
1742 * mn10x00-opc.c, mn10x00-dis.c: New files for Matsushita
1744 * disassemble (ARCH_mn10x00): Define.
1745 (disassembler): Handle bfd_arch_mn10x00.
1746 * configure.in: Recognize bfd_mn10x00_arch.
1747 * configure: Rebuilt.
1749 Tue Oct 1 10:49:11 1996 Ian Lance Taylor <ian@cygnus.com>
1751 * i386-dis.c (op_rtn): Change to be a pointer. Adjust uses
1752 accordingly. Don't declare functions using op_rtn.
1754 Fri Sep 27 18:28:59 1996 Stu Grossman (grossman@critters.cygnus.com)
1756 * v850-dis.c (disassemble): Add memaddr argument. Re-arrange
1757 params to be more standard.
1758 * (disassemble): Print absolute addresses and symbolic names for
1759 branch and jump targets.
1760 * v850-opc.c (v850_operand): Add displacement flag to 9 and 22
1762 * (v850_opcodes): Add breakpoint insn.
1764 Mon Sep 23 12:32:26 1996 Ian Lance Taylor <ian@cygnus.com>
1766 * m68k-opc.c: Move the fmovemx data register cases before the
1767 other cases, so that they get recognized before the data register
1768 does gets treated as a degenerate register list.
1770 Tue Sep 17 12:06:51 1996 Ian Lance Taylor <ian@cygnus.com>
1772 * mips-opc.c: Add a case for "div" and "divu" with two registers
1773 and a destination of $0.
1775 Tue Sep 10 16:12:39 1996 Fred Fish <fnf@rtl.cygnus.com>
1777 * mips-dis.c (print_insn_arg): Add prototype.
1778 (_print_insn_mips): Ditto.
1780 Mon Sep 9 14:26:26 1996 Ian Lance Taylor <ian@cygnus.com>
1782 * mips-dis.c (print_insn_arg): Print condition code registers as
1785 Tue Sep 3 12:09:46 1996 Doug Evans <dje@canuck.cygnus.com>
1787 * sparc-opc.c (sparc_opcodes): Add setuw, setsw, setx.
1789 Tue Sep 3 12:05:25 1996 Jeffrey A Law (law@cygnus.com)
1791 * v850-dis.c (disassemble): Make static. Provide prototype.
1793 Sun Sep 1 22:30:40 1996 Jeffrey A Law (law@cygnus.com)
1795 * v850-opc.c (insert_d9, insert_d22): Fix boundary case
1798 Sat Aug 31 01:27:26 1996 Jeffrey A Law (law@cygnus.com)
1800 * v850-dis.c (disassemble): Handle insertion of ',', '[' and
1801 ']' characters into the output stream.
1802 * v850-opc.c (v850_opcodes: Remove size field from all opcodes.
1803 Add "memop" field to all opcodes (for the disassembler).
1804 Reorder opcodes so that "nop" comes before "mov" and "jr"
1805 comes before "jarl".
1807 * v850-dis.c (print_insn_v850): Fix typo in last change.
1809 * v850-dis.c (print_insn_v850): Properly handle disassembling
1810 a two byte insn at the end of a memory region when the memory
1811 region's size is only two byte aligned.
1813 * v850-dis.c (v850_cc_names): Fix stupid thinkos.
1815 * v850-dis.c (v850_reg_names): Define.
1816 (v850_sreg_names, v850_cc_names): Likewise.
1817 (disassemble): Very rough cut at printing operands (unformatted).
1819 * v850-opc.c (BOP_MASK): Fix.
1820 (v850_opcodes): Fix mask for jarl and jr.
1822 * v850-dis.c: New file. Skeleton for disassembler support.
1823 * Makefile.in Remove v850 references, they're not needed here.
1824 * configure.in: Add v850-dis.o when building v850 toolchains.
1825 * configure: Rebuilt.
1826 * disassemble.c (disassembler): Call v850 disassembler.
1828 * v850-opc.c (insert_d8_7, extract_d8_7): New functions.
1829 (insert_d8_6, extract_d8_6): New functions.
1830 (v850_operands): Rename D7S to D7; operand for D7 is unsigned.
1831 Rename D8 to D8_7, use {insert,extract}_d8_7 routines.
1833 (IF4A, IF4B): Use "D7" instead of "D7S".
1834 (IF4C, IF4D): Use "D8_7" instead of "D8".
1835 (IF4E, IF4F): New. Use "D8_6".
1836 (v850_opcodes): Use IF4A/IF4B for sld.b/sst.b. Use IF4C/IF4D for
1837 sld.h/sst.h. Use IF4E/IF4F for sld.w/sst.w.
1839 * v850-opc.c (insert_d16_15, extract_d16_15): New functions.
1840 (v850_operands): Change D16 to D16_15, use special insert/extract
1841 routines. New new D16 that uses the generic insert/extract code.
1842 (IF7A, IF7B): Use D16_15.
1843 (IF7C, IF7D): New. Use D16.
1844 (v850_opcodes): Use IF7C and IF7D for ld.b and st.b.
1846 * v850-opc.c (insert_d9, insert_d22): Slightly improve error
1847 message. Issue an error if the branch offset is odd.
1849 * v850-opc.c: Add notes about needing special insert/extract
1850 for all the load/store insns, except "ld.b" and "st.b".
1852 * v850-opc.c (insert_d22, extract_d22): New functions.
1853 (v850_operands): Use insert_d22 and extract_d22 for
1855 (insert_d9): Fix range check.
1857 Fri Aug 30 18:01:02 1996 J.T. Conklin <jtc@hippo.cygnus.com>
1859 * v850-opc.c (v850_operands): Add V850_OPERAND_SIGNED flag
1860 and set bits field to D9 and D22 operands.
1862 Thu Aug 29 11:10:46 1996 Jeffrey A Law (law@cygnus.com)
1864 * v850-opc.c (v850_operands): Define SR2 operand.
1865 (v850_opcodes): "ldsr" uses R1,SR2.
1867 * v850-opc.c (v850_opcodes): Fix opcode specs for
1868 sld.w, sst.b, sst.h, sst.w, and nop.
1870 Wed Aug 28 15:55:43 1996 Jeffrey A Law (law@cygnus.com)
1872 * v850-opc.c (v850_opcodes): Add null opcode to mark the
1873 end of the opcode table.
1875 Mon Aug 26 13:35:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1877 * d10v-opc.c (pre_defined_registers): Added register pairs,
1878 "r0-r1", "r2-r3", etc.
1880 Fri Aug 23 00:27:01 1996 Jeffrey A Law (law@cygnus.com)
1882 * v850-opc.c (v850_operands): Make I16 be a signed operand.
1883 Create I16U for an unsigned 16bit mmediate operand.
1884 (v850_opcodes): Use I16U for "ori", "andi" and "xori".
1886 * v850-opc.c (v850_operands): Define EP operand.
1887 (IF4A, IF4B, IF4C, IF4D): Use EP.
1889 * v850-opc.c (v850_opcodes): Fix opcode numbers for "mov"
1890 with immediate operand, "movhi". Tweak "ldsr".
1892 * v850-opc.c (v850_opcodes): Get ld.[bhw] and st.[bhw]
1893 correct. Get sld.[bhw] and sst.[bhw] closer.
1895 * v850-opc.c (v850_operands): "not" is a two byte insn
1897 * v850-opc.c (v850_opcodes): Correct bit pattern for setf.
1899 * v850-opc.c (v850_operands): D16 inserts at offset 16!
1901 * v850-opc.c (two): Get order of words correct.
1903 * v850-opc.c (v850_operands): I16 inserts at offset 16!
1905 * v850-opc.c (v850_operands): Add "SR1" and "SR2" for system
1906 register source and destination operands.
1907 (v850_opcodes): Use SR1 and SR2 for "ldsr" and "stsr".
1909 * v850-opc.c (v850_opcodes): Fix thinko in "jmp" opcode. Fix
1910 same thinko in "trap" opcode.
1912 * v850-opc.c (v850_opcodes): Add initializer for size field
1915 * v850-opc.c (v850_operands): D6 -> DS7. References changed.
1916 Add D8 for 8-bit unsigned field in short load/store insns.
1917 (IF4A, IF4D): These both need two registers.
1918 (IF4C, IF4D): Define. Use 8-bit unsigned field.
1919 (v850_opcodes): For "sld.h", "sld.w", "sst.h", "sst.w", use
1920 IF4C & IF4D. For "trap" use I5U, not I5. Add IF1 operand
1921 for "ldsr" and "stsr".
1922 * v850-opc.c (v850_operands): 3-bit immediate for bit insns
1925 * v850-opc.c (v850_opcodes): Correct short store half (sst.h) and
1926 short store word (sst.w).
1928 Thu Aug 22 16:57:27 1996 J.T. Conklin <jtc@rtl.cygnus.com>
1930 * v850-opc.c (v850_operands): Added insert and extract fields,
1931 pointers to functions that handle unusual operand encodings.
1933 Thu Aug 22 01:05:24 1996 Jeffrey A Law (law@cygnus.com)
1935 * v850-opc.c (v850_opcodes): Enable "trap".
1937 * v850-opc.c (v850_opcodes): Fix order of displacement
1938 and register for "set1", "clr1", "not1", and "tst1".
1940 Wed Aug 21 18:46:26 1996 Jeffrey A Law (law@cygnus.com)
1942 * v850-opc.c (v850_operands): Add "B3" support.
1943 (v850_opcodes): Fix and enable "set1", "clr1", "not1"
1946 * v850-opc.c (v850_opcodes): "jmp" has only an R1 operand.
1948 * v850-opc.c: Close unterminated comment.
1950 Wed Aug 21 17:31:26 1996 J.T. Conklin <jtc@hippo.cygnus.com>
1952 * v850-opc.c (v850_operands): Add flags field.
1953 (v850_opcodes): add move opcodes.
1955 Tue Aug 20 14:41:03 1996 J.T. Conklin <jtc@hippo.cygnus.com>
1957 * Makefile.in (ALL_MACHINES): Add v850-opc.o.
1958 * configure: (bfd_v850v_arch) Add new case.
1959 * configure.in: (bfd_v850_arch) Add new case.
1960 * v850-opc.c: New file.
1962 Mon Aug 19 15:21:38 1996 Doug Evans <dje@canuck.cygnus.com>
1964 * sparc-dis.c (print_insn_sparc): Handle little endian sparcs.
1966 Thu Aug 15 13:14:43 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1968 * d10v-opc.c: Add additional information to the opcode
1969 table to help determinine which instructions can be done
1972 Thu Aug 15 13:11:13 1996 Stan Shebs <shebs@andros.cygnus.com>
1974 * mpw-make.sed: Update editing of include pathnames to be
1977 Thu Aug 15 16:28:41 1996 James G. Smith <jsmith@cygnus.co.uk>
1979 * arm-opc.h: Added "bx" instruction definition.
1981 Wed Aug 14 17:00:04 1996 Richard Henderson <rth@tamu.edu>
1983 * alpha-opc.c (EV4EXTHWINDEX): Field width should be 8 not 5.
1985 Mon Aug 12 14:30:37 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1987 * d10v-opc.c (d10v_opcodes): Minor fixes to addi and bl.l.
1989 Fri Aug 9 13:21:59 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1991 * d10v-opc.c (d10v_opcodes): Correct 'mv' unit entry to EITHER.
1993 Thu Aug 8 12:43:52 1996 Klaus Kaempf <kkaempf@progis.de>
1995 * makefile.vms: Update for alpha-opc changes.
1997 Wed Aug 7 11:55:10 1996 Ian Lance Taylor <ian@cygnus.com>
1999 * i386-dis.c (print_insn_i386): Actually return the correct value.
2000 (ONE, OP_ONE): #ifdef out; not used.
2002 Fri Aug 2 17:47:03 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2004 * d10v-opc.c (d10v_opcodes): Added 2 accumulator sub instructions.
2005 Changed subi operand type to treat 0 as 16.
2007 Wed Jul 31 16:21:41 1996 Ian Lance Taylor <ian@cygnus.com>
2009 * m68k-opc.c: Add cpushl for the mcf5200. From Ken Rose
2012 Wed Jul 31 14:39:27 1996 James G. Smith <jsmith@cygnus.co.uk>
2014 * arm-opc.h: (arm_opcodes): Added halfword and sign-extension
2015 memory transfer instructions. Add new format string entries %h and %s.
2016 * arm-dis.c: (print_insn_arm): Provide decoding of the new
2019 Fri Jul 26 11:45:04 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2021 * d10v-opc.c (d10v_operands): Added UNUM4S; a 4-bit accumulator shift.
2022 (d10v_opcodes): Modified accumulator shift instructions to use UNUM4S.
2024 Fri Jul 26 14:01:43 1996 Ian Lance Taylor <ian@cygnus.com>
2026 * alpha-dis.c (print_insn_alpha_osf): Remove.
2027 (print_insn_alpha_vms): Remove.
2028 (print_insn_alpha): Make globally visible. Chose the register
2029 names based on info->flavour.
2030 * disassemble.c: Always return print_insn_alpha for the alpha.
2032 Thu Jul 25 15:24:17 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2034 * d10v-dis.c (dis_long): Handle unknown opcodes.
2036 Thu Jul 25 12:08:09 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2038 * d10v-opc.c: Changes to support signed and unsigned numbers.
2039 All instructions with the same name that have long and short forms
2040 now end in ".l" or ".s". Divs added.
2041 * d10v-dis.c: Changes to support signed and unsigned numbers.
2043 Tue Jul 23 11:02:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2045 * d10v-dis.c: Change all functions to use info->print_address_func.
2047 Mon Jul 22 15:38:53 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2049 * m68k-opc.c (m68k_opcodes): Make opcode masks for the ColdFire
2050 move ccr/sr insns more strict so that the disassembler only
2051 selects them when the addressing mode is data register.
2053 Mon Jul 22 11:25:24 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2054 * d10v-opc.c (pre_defined_registers): Declare.
2055 * d10v-dis.c (print_operand): Now uses pre_defined_registers
2056 to pick a better name for the registers.
2058 Mon Jul 22 13:47:23 1996 Ian Lance Taylor <ian@cygnus.com>
2060 * sparc-opc.c: Fix opcode values for fpack16, and fpackfix. Fix
2061 operands for fexpand and fpmerge. From Christian Kuehnke
2062 <Christian.Kuehnke@arbi.informatik.uni-oldenburg.de>.
2064 Mon Jul 22 13:17:06 1996 Richard Henderson <rth@tamu.edu>
2066 * alpha-dis.c (print_insn_alpha): No longer the user-visible
2067 print routine. Take new regnames and cpumask arguments.
2068 Kill the environment variable nonsense.
2069 (print_insn_alpha_osf): New function. Do OSF/1 style regnames.
2070 (print_insn_alpha_vms): New function. Do VMS style regnames.
2071 * disassemble.c (disassembler): Test bfd flavour to pick
2072 between OSF and VMS routines. Default to OSF.
2074 Thu Jul 18 17:19:34 1996 Ian Lance Taylor <ian@cygnus.com>
2076 * configure.in: Call AC_SUBST (INSTALL_SHLIB).
2077 * configure: Rebuild.
2078 * Makefile.in (install): Use @INSTALL_SHLIB@.
2080 Wed Jul 17 14:39:05 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2082 * configure: (bfd_d10v_arch) Add new case.
2083 * configure.in: (bfd_d10v_arch) Add new case.
2084 * d10v-dis.c: New file.
2085 * d10v-opc.c: New file.
2086 * disassemble.c (disassembler) Add entry for d10v.
2088 Wed Jul 17 10:12:05 1996 J.T. Conklin <jtc@rtl.cygnus.com>
2090 * m68k-opc.c (m68k_opcodes): Fix bugs in coldfire insns relating
2091 to bcc, trapfl, subxl, and wddata discovered by Andreas Schwab.
2093 Mon Jul 15 16:59:55 1996 Stu Grossman (grossman@critters.cygnus.com)
2095 * i386-dis.c: Get rid of print_insn_i8086. Use info.mach to
2096 distinguish between variants of the instruction set.
2097 * sparc-dis.c: Get rid of print_insn_sparclite. Use info.mach to
2098 distinguish between variants of the instruction set.
2100 Fri Jul 12 10:12:01 1996 Stu Grossman (grossman@critters.cygnus.com)
2102 * i386-dis.c (print_insn_i8086): New routine to disassemble using
2103 the 8086 instruction set.
2104 * i386-dis.c: General cleanups. Make most things static. Add
2105 prototypes. Get rid of static variables aflags and dflags. Pass
2106 them as args (to almost everything).
2108 Thu Jul 11 11:58:44 1996 Jeffrey A Law (law@cygnus.com)
2110 * h8300-dis.c (bfd_h8_disassemble): Handle macregs in ldmac insns.
2112 * h8300-dis.c (bfd_h8_disassemble): Handle "ldm.l" and "stm.l".
2114 * h8300-dis.c (bfd_h8_disassemble): "abs" is implicitly two
2115 if the next arg is marked with SRC_IN_DST. Gross.
2117 * h8300-dis.c (bfd_h8_disassemble): Print "exr" when
2118 we're looking for and find EXR.
2120 * h8300-dis.c (bfd_h8_disassemble): We don't have a match
2121 if we're looking for KBIT and we don't find it.
2123 * h8300-dis.c (bfd_h8_disassemble): Mask off unwanted bits
2126 * h8300-dis.c (bfd_h8_disassemble): Don't set plen for
2127 3bit immediate operands.
2129 Tue Jul 9 10:55:20 1996 Ian Lance Taylor <ian@cygnus.com>
2131 * Released binutils 2.7.
2133 * alpha-opc.c: Add new case of "mov". From Klaus Kaempf
2134 <kkaempf@progis.ac-net.de>.
2136 Thu Jul 4 11:42:51 1996 Ian Lance Taylor <ian@cygnus.com>
2138 * alpha-opc.c: Correct second case of "mov" to use OPRL.
2140 Wed Jul 3 16:03:47 1996 Stu Grossman (grossman@critters.cygnus.com)
2142 * sparc-dis.c (print_insn_sparclite): New routine to print
2143 sparclite instructions.
2145 Wed Jul 3 14:21:18 1996 J.T. Conklin <jtc@rtl.cygnus.com>
2147 * m68k-opc.c (m68k_opcodes): Add coldfire support.
2149 Fri Jun 28 15:53:51 1996 Doug Evans <dje@canuck.cygnus.com>
2151 * sparc-opc.c (asi_table): Add #ASI_N, #ASI_N_L, #ASI_NUCLEUS,
2152 #ASI_NUCLEUS_LITTLE. Rename #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_L
2153 to #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_LITTLE.
2155 Tue Jun 25 22:58:31 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
2157 * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir):
2158 Use autoconf-set values.
2159 (docdir, oldincludedir): Removed.
2160 * configure.in (AC_PREREQ): autoconf 2.5 or higher.
2162 Fri Jun 21 13:53:36 1996 Richard Henderson <rth@tamu.edu>
2164 * alpha-opc.c: New file.
2165 * alpha-opc.h: Remove.
2166 * alpha-dis.c: Complete rewrite to use new opcode table.
2167 * configure.in: For bfd_alpha_arch, use alpha-opc.o.
2168 * configure: Rebuild with autoconf 2.10.
2169 * Makefile.in (ALL_MACHINES): Add alpha-opc.o.
2170 (alpha-dis.o): Depend upon $(INCDIR)/opcode/alpha.h, not
2172 (alpha-opc.o): New target.
2174 Wed Jun 19 15:55:12 1996 Ian Lance Taylor <ian@cygnus.com>
2176 * sparc-dis.c (print_insn_sparc): Remove unused local variable i.
2177 Set imm_added_to_rs1 even if the source and destination register
2180 * sparc-opc.c: Add some two operand forms of the wr instruction.
2182 Tue Jun 18 15:58:27 1996 Jeffrey A. Law <law@rtl.cygnus.com>
2184 * h8300-dis.c (bfd_h8_disassemble): Rename "hmode" argument
2187 * disassemble.c (disassembler): Handle H8/S.
2188 * h8300-dis.c (print_insn_h8300s): New function for H8/S.
2190 Tue Jun 18 18:06:50 1996 Ian Lance Taylor <ian@cygnus.com>
2192 * sparc-opc.c: Add beq/teq as aliases for be/te.
2194 * ppc-opc.c: Fix fcmpo opcode. From Sergei Steshenko
2195 <sergei@msil.sps.mot.com>.
2197 Tue Jun 18 15:08:54 1996 Klaus Kaempf <kkaempf@progis.de>
2199 * makefile.vms: New file.
2201 * alpha-dis.c (print_insn_alpha): Print lda ra,lit(rz) as mov.
2203 Mon Jun 10 18:50:38 1996 Ian Lance Taylor <ian@cygnus.com>
2205 * h8300-dis.c (bfd_h8_disassemble): Always print ABS8MEM with :8,
2208 Tue Jun 4 09:15:53 1996 Doug Evans <dje@canuck.cygnus.com>
2210 * i386-dis.c (OP_OFF): Call append_prefix.
2212 Thu May 23 15:18:23 1996 Michael Meissner <meissner@tiktok.cygnus.com>
2214 * ppc-opc.c (instruction encoding macros): Add explicit casts to
2215 unsigned long to silence a warning from the Solaris PowerPC
2218 Thu Apr 25 19:33:32 1996 Doug Evans <dje@canuck.cygnus.com>
2220 * sparc-opc.c (sparc_opcodes): Add ultrasparc vis extensions.
2222 Mon Apr 22 17:12:35 1996 Doug Evans <dje@blues.cygnus.com>
2224 * sparc-dis.c (X_IMM,X_SIMM): New macros.
2226 (print_insn_sparc): Merge cases i,I,j together. New cases X,Y.
2227 * sparc-opc.c (sparc_opcodes): Use X for 5 bit shift constants,
2228 Y for 6 bit shift constants. Rewrite entries for crdcxt, cwrcxt,
2229 cpush, cpusha, cpull sparclet insns.
2231 Wed Apr 17 14:20:22 1996 Doug Evans <dje@canuck.cygnus.com>
2233 * sparc-dis.c (compute_arch_mask): Replace ANSI style def with K&R.
2235 Thu Apr 11 17:30:02 1996 Ian Lance Taylor <ian@cygnus.com>
2237 * sparc-opc.c: Set F_FBR on floating point branch instructions.
2238 Set F_FLOAT on other floating point instructions.
2240 Mon Apr 8 17:02:48 1996 Michael Meissner <meissner@tiktok.cygnus.com>
2242 * ppc-opc.c (PPC860): Macro for 860/821 specific instructions and
2244 (powerpc_opcodes): Add 860/821 specific SPRs.
2246 Mon Apr 8 14:00:44 1996 Ian Lance Taylor <ian@cygnus.com>
2248 * configure.in: Permit --enable-shared to specify a list of
2249 directories. Set and substitute BFD_PICLIST.
2250 * configure: Rebuild.
2251 * Makefile.in (BFD_PICLIST): Rename from BFD_LIST. Change all
2252 uses. Set to @BFD_PICLIST@.
2254 Fri Apr 5 17:12:27 1996 Jeffrey A Law (law@cygnus.com)
2256 * h8300-dis.c (bfd_h8_disassemble): Use "bit" for L_3 immediates,
2257 not "abs", which may be needed for the absolute in something
2258 like btst #0,@10:8. Print L_3 immediates separately from other
2259 immediates. Change ABSMOV reference to ABS8MEM.
2261 Wed Apr 3 10:40:45 1996 Doug Evans <dje@canuck.cygnus.com>
2263 * sparc-dis.c (opcodes_initialized): Move inside print_insn_sparc.
2264 (current_arch_mask): New static global.
2265 (compute_arch_mask): New static function.
2266 (print_insn_sparc): Delete sparc_v9_p. New static local
2267 current_mach. Resort opcode table if current_mach changes.
2268 Generalize "insn not supported" test.
2269 (compare_opcodes): Prefer supported opcodes to nonsupported ones.
2270 Delete test for v9/!v9.
2271 * sparc-opc.c (MASK_*): Use SPARC_OPCODE_ARCH_MASK.
2273 (brfc): Split into CBR and FBR for coprocessor/fp branches.
2274 (brfcx): Renamed to FBRX.
2275 (condfc): Renamed to CONDFC. Pass v6notlet to CBR (standard
2276 coprocessor mnemonics are not supported on the sparclet).
2277 (condf): Renamed to CONDF.
2278 (SLCBCC2): Delete F_ALIAS flag.
2280 Sat Mar 30 21:45:59 1996 Doug Evans <dje@canuck.cygnus.com>
2282 * sparc-opc.c (sparc_opcodes): rd must be 0 for
2283 mov foo,{%y,%psr,%wim,%tbr}. Support mov foo,%asrX.
2285 Fri Mar 29 13:02:40 1996 Ian Lance Taylor <ian@cygnus.com>
2287 * Makefile.in (config.status): Depend upon BFD VERSION file, so
2288 that the shared library version number is set correctly.
2290 Tue Mar 26 15:47:14 1996 Ian Lance Taylor <ian@cygnus.com>
2292 * configure.in: Use AC_CHECK_TOOL to find ar and ranlib. From
2293 Miles Bader <miles@gnu.ai.mit.edu>.
2294 * configure: Rebuild.
2296 Sat Mar 16 13:04:07 1996 Fred Fish <fnf@cygnus.com>
2298 * z8kgen.c (internal, gas): Call xmalloc rather than unchecked
2301 Tue Mar 12 12:14:10 1996 Ian Lance Taylor <ian@cygnus.com>
2303 * configure: Rebuild with autoconf 2.8.
2305 Thu Mar 7 15:11:10 1996 Doug Evans <dje@charmed.cygnus.com>
2307 * sparc-dis.c (print_insn_sparc): Handle 'O' operand char like 'r'.
2308 * sparc-opc.c (sparc_opcodes): Use 'O' operand char for `neg reg'.
2310 Tue Mar 5 15:51:57 1996 Ian Lance Taylor <ian@cygnus.com>
2312 * configure.in: Don't set SHLIB or SHLINK to an empty string,
2313 since they appear as targets in Makefile.in.
2314 * configure: Rebuild.
2316 Mon Feb 26 13:03:40 1996 Stan Shebs <shebs@andros.cygnus.com>
2318 * mpw-make.sed: Edit out shared library support bits.
2320 Tue Feb 20 20:48:28 1996 Doug Evans <dje@charmed.cygnus.com>
2322 * sparc-opc.c (v8,v6notv9): Add MASK_SPARCLET.
2323 (sparc_opcode_archs): Add MASK_V8 to sparclet entry.
2324 (sparc_opcodes): Add sparclet insns.
2325 (sparclet_cpreg_table): New static local.
2326 (sparc_{encode,decode}_sparclet_cpreg): New functions.
2327 * sparc-dis.c (print_insn_sparc): Handle sparclet cpregs.
2329 Tue Feb 20 11:02:44 1996 Alan Modra <alan@mullet.Levels.UniSA.Edu.Au>
2331 * i386-dis.c (index16): New static variable.
2332 (putop): Print jecxz for 32 bit case, jcxz for 16 bit, not the
2334 (OP_indirE): Return result of OP_E.
2335 (OP_E): Check for 16 bit addressing mode, and disassemble
2336 correctly. Optimised 32 bit case a little. Don't print
2337 "(base,index,scale)" when sib specifies only an offset.
2339 Mon Feb 19 12:32:17 1996 Ian Lance Taylor <ian@cygnus.com>
2341 * configure.in: Set and substitute SHLIB_DEP.
2342 * configure: Rebuild.
2343 * Makefile.in (SHLIB_DEP): New variable.
2344 (LIBIBERTY_LISTS, BFD_LIST): New variables.
2345 (stamp-piclist): Depend upon LIBIBERTY_LISTS and BFD_LIST. If
2346 COMMON_SHLIB, add them to piclist with appropriate modifications.
2347 ($(SHLIB)): Depend upon $(SHLIB_DEP). Don't check COMMON_SHLIB
2348 here: just use piclist.
2350 Mon Feb 19 02:03:50 1996 Doug Evans <dje@charmed.cygnus.com>
2352 * sparc-dis.c (MASK_V9,V9_ONLY_P,V9_P): Define.
2353 (print_insn_sparc): Rewrite v9/not-v9 tests.
2354 (compare_opcodes): Likewise.
2355 * sparc-opc.c (MASK_<ARCH>): Define.
2356 (v6,v7,v8,sparclite,v9,v9a): Redefine.
2357 (sparclet,v6notv9): Define.
2358 (sparc_opcode_archs): Delete member `conflicts'. Add `supported'.
2359 (sparc_opcodes): Delete F_NOTV9, use v6notv9 instead.
2361 Thu Feb 15 14:45:05 1996 Ian Lance Taylor <ian@cygnus.com>
2363 * configure.in: Call AC_PROG_CC before configure.host.
2364 * configure: Rebuild.
2366 * Makefile.in (SONAME): Remove leading ../bfd/ from $(SHLIB).
2368 Wed Feb 14 19:01:27 1996 Alan Modra <alan@spri.levels.unisa.edu.au>
2370 * i386-dis.c (onebyte_has_modrm): New static array.
2371 (twobyte_has_modrm): New static array.
2372 (print_insn_i386): Only fetch the mod/reg/rm byte if it is needed.
2374 Tue Feb 13 15:15:01 1996 Ian Lance Taylor <ian@cygnus.com>
2376 * Makefile.in ($(SHLINK)): Check ts against $(SHLIB), not
2379 Mon Feb 12 16:26:06 1996 Michael Meissner <meissner@tiktok.cygnus.com>
2381 * ppc-opc.c (PPC): Undef, so default defination on Windows NT
2384 Wed Feb 7 13:59:54 1996 Ian Lance Taylor <ian@cygnus.com>
2386 * m68k-opc.c (m68k_opcodes): The bkpt instruction is supported on
2387 m68010up, not just m68020up | cpu32.
2389 * Makefile.in (SONAME): New variable.
2390 ($(SHLINK)): Make a link to the transformed name, as well.
2391 (stamp-tshlink): New target.
2392 (install): Skip stamp-tshlink during install.
2394 Tue Feb 6 12:28:54 1996 Ian Lance Taylor <ian@cygnus.com>
2396 * configure.in: Call AC_ARG_PROGRAM.
2397 * configure: Rebuild.
2398 * Makefile.in (program_transform_name): New variable.
2399 (install): Transform library name before installing it.
2401 Mon Feb 5 16:14:42 1996 Ian Lance Taylor <ian@cygnus.com>
2403 * i960-dis.c (mem): Add HX dcinva instruction.
2405 Support for building as a shared library, based on patches from
2406 Alan Modra <alan@spri.levels.unisa.edu.au>:
2407 * configure.in: Add AC_ARG_ENABLE for shared and commonbfdlib.
2408 New substitutions: ALLLIBS, PICFLAG, SHLIB, SHLIB_CC,
2409 SHLIB_CFLAGS, COMMON_SHLIB, SHLINK.
2410 * configure: Rebuild.
2411 * Makefile.in (ALLLIBS): New variable.
2412 (PICFLAG, SHLIB, SHLIB_CC, SHLIB_CFLAGS): New variables.
2413 (COMMON_SHLIB, SHLINK): New variables.
2414 (.c.o): If PICFLAG is set, compile twice, once PIC, once normal.
2415 (STAGESTUFF): Remove variable.
2416 (all): Depend upon $(ALLLIBS) rather than $(TARGETLIB).
2417 (stamp-piclist, piclist): New targets.
2418 ($(SHLIB), $(SHLINK)): New targets.
2419 ($(OFILES)): Depend upon stamp-picdir.
2420 (disassemble.o): Build twice if PICFLAG is set.
2421 (MOSTLYCLEAN): Add pic/*.o.
2422 (clean): Remove $(SHLIB), $(SHLINK), piclist, and stamp-piclist.
2423 (distclean): Remove pic and stamp-picdir.
2424 (install): Install shared libraries.
2425 (stamp-picdir): New target.
2427 Fri Feb 2 17:15:25 1996 Doug Evans <dje@charmed.cygnus.com>
2429 * sparc-dis.c (print_insn_sparc): Delete DISASM_RAW_INSN support.
2430 Print unknown instruction as "unknown", rather than in hex.
2432 Tue Jan 30 14:06:08 1996 Ian Lance Taylor <ian@cygnus.com>
2434 * dis-buf.c: Include "sysdep.h" before "dis-asm.h".
2436 Thu Jan 25 20:24:07 1996 Doug Evans <dje@charmed.cygnus.com>
2438 * sparc-opc.c (sparc_opcode_archs): Mark v8/sparclite as conflicting.
2440 Thu Jan 25 11:56:49 1996 Ian Lance Taylor <ian@cygnus.com>
2442 * i386-dis.c (print_insn_i386): Only fetch the mod/reg/rm byte
2443 when necessary. From Ulrich Drepper
2444 <drepper@myware.rz.uni-karlsruhe.de>.
2446 Thu Jan 25 03:39:10 1996 Doug Evans <dje@charmed.cygnus.com>
2448 * sparc-dis.c (print_insn_sparc): NUMOPCODES replaced with
2449 sparc_num_opcodes. Update architecture enum values.
2450 * sparc-opc.c (sparc_opcode_archs): Replaces architecture_pname.
2451 (sparc_opcode_lookup_arch): New function.
2452 (sparc_num_opcodes): Renamed from bfd_sparc_num_opcodes.
2453 (sparc_opcodes): Add v9a shutdown insn.
2455 Mon Jan 22 08:29:59 1996 Doug Evans <dje@charmed.cygnus.com>
2457 * sparc-dis.c (print_insn_sparc): Renamed from print_insn.
2458 If DISASM_RAW_INSN, print insn in hex. Handle v9a as opcode
2460 (print_insn_sparc64): Deleted.
2461 * disassemble.c (disassembler, case bfd_arch_sparc): Always use
2464 * sparc-opc.c (architecture_pname): Add v9a.
2466 Fri Jan 12 14:35:58 1996 David Mosberger-Tang <davidm@AZStarNet.com>
2468 * alpha-opc.h (alpha_insn_set): VAX floating point opcode was
2469 incorrectly defined as 0x16 when it should be 0x15.
2470 (FLOAT_FORMAT_MASK): function code is 11 bits, not just 7 bits!
2471 (alpha_insn_set): added cvtst and cvttq float ops. Also added
2472 excb (exception barrier) which is defined in the Alpha
2473 Architecture Handbook version 2.
2474 * alpha-dis.c (print_insn_alpha): Fixed special-case decoding for
2475 OPERATE_FORMAT_CODE type instructions. The bug caused mulq to be
2476 disassembled as or, for example.
2478 Wed Jan 10 12:37:22 1996 Ian Lance Taylor <ian@cygnus.com>
2480 * mips-dis.c (print_insn_arg): Print cases 'i' and 'u' in hex.
2481 (_print_insn_mips): Change i from int to unsigned int.
2483 Thu Jan 4 17:21:10 1996 David Edelsohn <edelsohn@mhpcc.edu>
2485 * ppc-opc.c (powerpc_opcodes): tlbi POWER opcode form different
2486 from tlbie PowerPC opcode. Add PPC603 tlbld and tlbli.
2488 Thu Dec 28 13:29:19 1995 John Hassey <hassey@rtp.dg.com>
2490 * i386-dis.c: Added Pentium Pro instructions.
2492 Tue Dec 19 22:56:35 1995 Michael Meissner <meissner@tiktok.cygnus.com>
2494 * ppc-opc.c (fsqrt{,.}): Duplicate for PowerPC in addition to
2497 Fri Dec 15 14:14:15 1995 J.T. Conklin <jtc@rtl.cygnus.com>
2499 * sh-opc.h (sh_nibble_type): Added REG_B.
2500 (sh_arg_type): Added A_REG_B.
2501 (sh_table): Added pref and bank reg versions of ldc, ldc.l, stc
2503 * sh-dis.c (print_insn_shx): Added cases for REG_B and A_REG_B.
2505 Fri Dec 15 16:44:31 1995 Ian Lance Taylor <ian@cygnus.com>
2507 * disassemble.c (disassembler): Use new bfd_big_endian macro.
2509 Tue Dec 12 12:22:24 1995 Ian Lance Taylor <ian@cygnus.com>
2511 * Makefile.in (distclean): Remove stamp-h. From Ronald
2512 F. Guilmette <rfg@monkeys.com>.
2514 Tue Dec 5 13:42:44 1995 Stan Shebs <shebs@andros.cygnus.com>
2516 From David Mosberger-Tang <davidm@azstarnet.com>:
2517 * alpha-dis.c (print_insn_alpha): fixed decoding of cpys
2520 Mon Dec 4 12:29:05 1995 J.T. Conklin <jtc@rtl.cygnus.com>
2522 * sh-opc.h (sh_arg_type): Added A_SSR and A_SPC.
2523 (sh_table): Added many SH3 opcodes.
2524 * sh-dis.c (print_insn_shx): Added cases for A_SSR and A_SPC.
2526 Fri Dec 1 07:42:18 1995 Michael Meissner <meissner@tiktok.cygnus.com>
2528 * ppc-opc.c (subfc., subfco): Mark this PPCCOM, not PPC.
2529 (subco,subco.): Mark this PPC, not PPCCOM.
2531 Mon Nov 27 13:09:52 1995 Ian Lance Taylor <ian@cygnus.com>
2533 * configure: Rebuild with autoconf 2.7.
2535 Tue Nov 21 18:28:06 1995 Ian Lance Taylor <ian@cygnus.com>
2537 * configure: Rebuild with autoconf 2.6.
2539 Wed Nov 15 19:02:53 1995 Ken Raeburn <raeburn@cygnus.com>
2541 * configure.in: Sort list of architectures. Accept but do nothing
2542 for alliant, convex, pyramid, romp, and tahoe.
2544 Wed Nov 8 20:18:59 1995 Ian Lance Taylor <ian@cygnus.com>
2546 * a29k-dis.c (print_special): Change num to unsigned int.
2548 Wed Nov 8 20:10:35 1995 Eric Freudenthal <freudenthal@nyu.edu>
2550 * a29k-dis.c (print_insn): Cast insn24 to unsigned long when
2553 Tue Nov 7 15:21:06 1995 Ian Lance Taylor <ian@cygnus.com>
2555 * configure.in: Call AC_CHECK_PROG to find and cache AR.
2556 * configure: Rebuilt.
2558 Mon Nov 6 17:39:47 1995 Harry Dolan <dolan@ssd.intel.com>
2560 * configure.in: Add case for bfd_i860_arch.
2561 * configure: Rebuild.
2563 Fri Nov 3 12:45:31 1995 Ian Lance Taylor <ian@cygnus.com>
2565 * m68k-opc.c (m68k_opcodes): Correct fmoveml operands.
2566 * m68k-dis.c (NEXTSINGLE): Change i to unsigned int.
2567 (NEXTDOUBLE): Likewise.
2568 (print_insn_m68k): Don't match fmoveml if there is more than one
2569 register in the list.
2570 (print_insn_arg): Handle a place of '8' for a type of 'L'.
2572 Thu Nov 2 23:06:33 1995 Ian Lance Taylor <ian@cygnus.com>
2574 * m68k-opc.c: Use #W rather than #w.
2575 * m68k-dis.c (print_insn_arg): Handle new 'W' place.
2577 Wed Nov 1 13:30:24 1995 Ian Lance Taylor <ian@cygnus.com>
2579 * m68k-opc.c (m68k_opcode_aliases): Add dbfw as an alias for dbf,
2580 and likewise for all the dbxx opcodes.
2582 Mon Oct 30 20:50:40 1995 Fred Fish <fnf@cygnus.com>
2584 * arc-dis.c: Include elf-bfd.h rather than libelf.h.
2586 Mon Oct 23 11:11:34 1995 James G. Smith <jsmith@pasanda.cygnus.co.uk>
2588 * mips-opc.c: Added shorthand (V1) for INSN_4100 manifest. Added
2589 the VR4100 specific instructions to the mips_opcodes structure.
2591 Thu Oct 19 11:05:23 1995 Stan Shebs <shebs@andros.cygnus.com>
2593 * mpw-config.in, mpw-make.sed: Remove ugly workaround for
2594 ugly Metrowerks bug in CW6, is fixed in CW7.
2596 Mon Oct 16 12:59:01 1995 Michael Meissner <meissner@tiktok.cygnus.com>
2598 * ppc-opc.c (whole file): Add flags for common/any support.
2600 Tue Oct 10 11:06:07 1995 Fred Fish <fnf@cygnus.com>
2602 * Makefile.in (BISON): Remove macro.
2603 (FLAGS_TO_PASS): Remove BISON.
2605 Fri Oct 6 16:26:45 1995 Ken Raeburn <raeburn@cygnus.com>
2607 Mon Sep 25 22:49:32 1995 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2609 * m68k-dis.c (print_insn_m68k): Recognize all two-word
2610 instructions that take no args by looking at the match mask.
2611 (print_insn_arg): Always print "%" before register names.
2612 [case 'c']: Use "nc" for the no-cache case, as recognized by gas.
2613 [case '_']: Don't print "@#" before address.
2614 [case 'J']: Use "%s" as format string, not register name.
2615 [case 'B']: Treat place == 'C' like 'l' and 'L'.
2617 Thu Oct 5 22:16:20 1995 Ken Raeburn <raeburn@cygnus.com>
2619 * i386-dis.c: Describe cmpxchg8b operand, and spell the opcode
2622 Tue Oct 3 08:30:20 1995 steve chamberlain <sac@slash.cygnus.com>
2624 From David Mosberger-Tang <davidm@azstarnet.com>
2626 * alpha-opc.h (MEMORY_FUNCTION_FORMAT_MASK): added.
2627 (alpha_insn_set): added definitions for VAX floating point
2628 instructions (Unix compilers don't generate these, but handcoded
2629 assembly might still use them).
2631 * alpha-dis.c (print_insn_alpha): added support for disassembling
2632 the miscellaneous instructions in the Alpha instruction set.
2634 Tue Sep 26 18:47:20 1995 Stan Shebs <shebs@andros.cygnus.com>
2636 * mpw-config.in: Add m68k-opc.c.o to BFD_MACHINES for m68k,
2637 no longer create sysdep.h, sed ppc-opc.c to work around a
2638 serious Metrowerks C bug.
2639 * mpw-make.in: Remove.
2640 * mpw-make.sed: New file, used by mpw-configure to edit
2641 Makefile.in into an MPW makefile.
2643 Wed Sep 20 12:55:28 1995 Ian Lance Taylor <ian@cygnus.com>
2645 * Makefile.in (maintainer-clean): New synonym for realclean.
2647 Tue Sep 19 15:28:36 1995 Ian Lance Taylor <ian@cygnus.com>
2649 * m68k-opc.c: Split pmove patterns which use 'P' into patterns
2650 which use '0', '1', and '2' instead. Specify the proper size for
2651 a pmove immediate operand. Correct the pmovefd patterns to be
2652 moves to a register, not from a register.
2653 * m68k-dis.c (print_insn_arg): Replace 'P' with '0', '1', '2'.
2655 Thu Sep 14 11:58:22 1995 Doug Evans <dje@canuck.cygnus.com>
2657 * sparc-opc.c (sparc_opcodes): Mark all insns that reference
2658 %psr, %wim, %tbr as F_NOTV9.
2660 Fri Sep 8 01:07:38 1995 Ian Lance Taylor <ian@cygnus.com>
2662 * Makefile.in (Makefile): Just rebuild Makefile when running
2664 (config.h, stamp-h): New targets.
2665 * configure.in: Call AC_CONFIG_HEADER and AC_CANONICAL_SYSTEM
2666 earlier. Don't bother to call AC_ARG_PROGRAM. Touch stamp-h when
2667 rebuilding config.h.
2668 * configure: Rebuild.
2670 * mips-opc.c: Change unaligned loads and stores with "t,A"
2671 operands to use "t,A(b)".
2673 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2675 * sh-dis.c (print_insn_shx): Add F_FR0 support.
2677 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2679 * sh-dis.c (print_insn_shx): Change loop over op->arg[n] to iterate
2680 until 3 instead of until 2.
2682 Wed Sep 6 21:21:33 1995 Ian Lance Taylor <ian@cygnus.com>
2684 * Makefile.in (ALL_CFLAGS): Define.
2685 (.c.o, disassemble.o): Use $(ALL_CFLAGS).
2686 (MOSTLYCLEAN): Add config.log.
2687 (distclean): Don't remove config.log.
2688 * configure.in: Substitute HDEFINES.
2689 * configure: Rebuild.
2691 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2693 * sh-opc.h (sh_arg_type): Add F_FR0.
2694 (sh_table, case fmac): Add F_FR0 as first argument.
2696 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2698 * sh-opc.h (sh_opcode_info): Increase arg array size to 4.
2700 Tue Sep 5 18:28:10 1995 Doug Evans <dje@canuck.cygnus.com>
2702 * sparc-dis.c: Remove all references to NO_V9.
2704 Tue Sep 5 20:03:26 1995 Ian Lance Taylor <ian@cygnus.com>
2706 * aclocal.m4: Just include ../bfd/aclocal.m4.
2707 * configure: Rebuild.
2709 Tue Sep 5 16:09:59 1995 Doug Evans <dje@canuck.cygnus.com>
2711 * sparc-dis.c (X_DISP19): Define.
2712 (print_insn, case 'G'): Use it.
2713 (print_insn, case 'L'): Sign extend displacement.
2715 Mon Sep 4 14:28:46 1995 Ian Lance Taylor <ian@cygnus.com>
2717 * configure.in: Run ../bfd/configure.host before AC_PROG_CC.
2718 Subsitute CFLAGS and AR. Call AC_PROG_INSTALL. Don't substitute
2719 host_makefile_frag or frags.
2720 * aclocal.m4: New file.
2721 * configure: Rebuild.
2722 * Makefile.in (INSTALL): Set to @INSTALL@.
2723 (INSTALL_PROGRAM): Set to @INSTALL_PROGRAM@.
2724 (INSTALL_DATA): Set to @INSTALL_DATA@.
2726 (AR_FLAGS): Set to rc rather than qc.
2727 (CC): Define as @CC@.
2728 (CFLAGS): Set to @CFLAGS@.
2729 (@host_makefile_frag@): Remove.
2730 (config.status): Remove dependency upon @frags@.
2732 * configure.in: ../bfd/config.bfd now just sets shell variables.
2733 Use them rather than looking through target Makefile fragments.
2734 * configure: Rebuild.
2736 Thu Aug 31 12:35:32 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2738 * sh-opc.h (ftrc): Change FPUL_N to FPUL_M.
2740 Wed Aug 30 13:52:28 1995 Doug Evans <dje@canuck.cygnus.com>
2742 * sparc-opc.c (sparc_opcodes): Delete duplicate wr %y insn.
2743 Add clrx, iprefetch, signx, clruw, cas, casl, casx, casxl synthetic
2746 * sparc-opc.c (sparc_opcodes): Fix prefetcha insn.
2747 (lookup_{name,value}): New functions.
2748 (prefetch_table): New static local.
2749 (sparc_{encode,decode}_prefetch): New functions.
2750 * sparc-dis.c (print_insn): Handle '*' arg (prefetch function).
2752 Wed Aug 30 11:11:58 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2754 * sh-opc.h: Add blank lines to improve readabililty of sh3e
2757 Wed Aug 30 11:09:38 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2759 * sh-dis.c: Correct comment on first line of file.
2761 Tue Aug 29 15:37:18 1995 Doug Evans <dje@canuck.cygnus.com>
2763 * disassemble.c (disassembler): Handle bfd_mach_sparc64.
2765 * sparc-opc.c (asi, membar): New static locals.
2766 (sparc_{encode,decode}_{asi,membar}): New functions.
2767 (sparc_opcodes, membar insn): Fix.
2768 * sparc-dis.c (print_insn): Call sparc_decode_asi.
2769 Support decoding of membar masks.
2772 Sat Aug 26 21:22:48 1995 Ian Lance Taylor <ian@cygnus.com>
2774 * m68k-opc.c (m68k_opcode_aliases): Add br, brs, brb, brw, brl.
2776 Mon Aug 21 17:33:36 1995 Ian Lance Taylor <ian@cygnus.com>
2778 * m68k-opc.c (m68k_opcode_aliases): Add bhib as an alias for bhis,
2779 and likewise for the other branches. Add bhs as an alias for bcc,
2780 and likewise for the size variants. Add dbhs as an alias for
2783 Fri Aug 11 13:40:24 1995 Jeff Law (law@snake.cs.utah.edu)
2785 * sh-opc.h (FP sts instructions): Update to match reality.
2787 Mon Aug 7 16:12:58 1995 Ian Lance Taylor <ian@cygnus.com>
2789 * m68k-dis.c: (fpcr_names): Add % before all register names.
2790 (reg_names): Likewise.
2791 (print_insn_arg): Don't explicitly print % before register names.
2792 Add % before register names in static array names. In case 'r',
2793 print data registers as `@(Dn)', not `Dn@'. When printing a
2794 memory address, don't print @# before it.
2795 (print_indexed): Change base_disp and outer_disp from int to
2796 bfd_vma. Print using MIT syntax, not mutant invalid Motorola
2797 syntax. Sign extend 8 byte displacement correctly.
2798 (print_base): Print using MIT syntax. Print zpc when appropriate.
2799 Change parameter disp from int to bfd_vma.
2801 * m68k-opc.c (m68k_opcode_aliases): Add jsrl and jsrs as aliases
2804 Mon Aug 7 02:21:40 1995 Jeff Law (law@snake.cs.utah.edu)
2806 * sh-dis.c (print_insn_shx): Handle new operand types F_REG_N,
2807 F_REG_M, FPSCR_M, FPSCR_N, FPUL_M and FPUL_N.
2808 * sh-opc.h (sh_arg_type): Add new operand types.
2809 (sh_table): Add new opcodes from SH3E Floating Point ISA.
2811 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
2813 * Makefile.in (distclean): Remove generated file config.h.
2815 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
2817 * Makefile.in (distclean): Remove generated file config.h.
2819 Wed Aug 2 18:33:40 1995 Ian Lance Taylor <ian@cygnus.com>
2821 * m68k-opc.c: New file, holding tables from include/opcode/m68k.h.
2823 * m68k-dis.c: Remove BREAK_UP_BIG_DECL stuff.
2825 (print_insn_m68k): Change d to be const. Use m68k_numopcodes
2826 rather than numopcodes. Use m68k_opcodes rather than removed
2827 opcode function. Don't check F_ALIAS.
2828 (print_insn_arg): Change first parameter to be const char *.
2829 * Makefile.in (ALL_MACHINES): Add m68k-opc.o.
2830 (m68k-opc.o): New target.
2831 * configure.in: Build m68k-opc.o for bfd_m68k_arch.
2832 * configure: Rebuild.
2834 Wed Aug 2 08:23:38 1995 Doug Evans <dje@canuck.cygnus.com>
2836 * sparc-dis.c (HASH_SIZE, HASH_INSN): Define.
2837 (opcode_bits, opcode_hash_table): New variables.
2838 (opcodes_initialized): Renamed from opcodes_sorted.
2839 (build_hash_table): New function.
2840 (is_delayed_branch): Use hash table.
2841 (print_insn): Renamed from print_insn_sparc, made static.
2842 Build and use hash table. If !sparc64, ignore sparc64 insns,
2843 and vice-versa if sparc64.
2844 (print_insn_sparc, print_insn_sparc64): New functions.
2845 (compare_opcodes): Move sparc64 opcodes to end.
2846 Print commutative insns with constant second.
2847 * sparc-opc.c (all non-v9 insns): Use flag F_NOTV9 instead of F_ALIAS.
2849 Tue Aug 1 00:12:49 1995 Ian Lance Taylor <ian@cygnus.com>
2851 * sh-dis.c (print_insn_shx): Remove unused local dslot. Use
2852 print_address_func for A_BDISP12 and A_BDISP8. Correct test which
2853 avoids printing a delay slot in a delay slot.
2854 * sh-opc.h (sh_table): Fully bracket last entry.
2856 Mon Jul 31 12:04:47 1995 Doug Evans <dje@canuck.cygnus.com>
2858 * sparc-opc.c (sllx, srax, srlx): Fix disassembly.
2860 Wed Jul 12 00:59:34 1995 Ken Raeburn <raeburn@kr-pc.cygnus.com>
2862 * configure.in: Get host_makefile_frag from ${srcdir}.
2864 * configure.in: Autoconfiscated. Check for string[s].h. Create
2865 config.h from config.in. Don't set up sysdep.h link.
2866 * sysdep.h: New file.
2867 * configure, config.in: New files, generated from configure.in.
2868 * Makefile.in: Updated to be processed autoconf-style.
2869 (distclean): Keep sysdep.h. Remove config.log and config.cache.
2870 (Makefile): Depend on config.status.
2871 (config.status): New rule.
2872 * configure.bat: Update Makefile substitutions.
2874 Tue Jul 11 14:23:37 1995 Jeff Spiegel <jeffs@lsil.com>
2876 * mips-opc.c (L1): Define.
2877 (mips_opcodes): Add R4010 instructions: flushi, flushd, flushid,
2878 addciu, madd, maddu, ffc, ffs, msub, msubu, selsi, selsr, waiti,
2881 Tue Jul 11 11:49:49 1995 Ian Lance Taylor <ian@cygnus.com>
2883 * mips-opc.c (mips_opcodes): For the move pseudo-op, prefer daddu
2884 if ISA 3 and addu otherwise, replacing or, since some MIPS chips
2885 have multiple add units but only a single logical unit.
2887 * ppc-opc.c (powerpc_operands): Change CR to use a bitsize of 3,
2888 shifted by 18, without any insertion or extraction function.
2889 (insert_cr, extract_cr): Remove.
2891 Wed Jun 21 20:05:39 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
2893 * m68k-dis.c (print_insn_arg, print_indexed): Print "%" before
2896 Thu Jun 15 17:23:31 1995 Stan Shebs <shebs@andros.cygnus.com>
2898 * mpw-config.in: Add sh and i386 configs, remove sparc config.
2899 * sh-opc.h: Add copyright.
2901 Mon Jun 5 03:30:43 1995 Ken Raeburn <raeburn@kr-laptop.cygnus.com>
2903 * Makefile.in (crunch-m68k): Delete extra target accidentally
2904 checked in a while ago.
2906 Wed May 24 16:22:13 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2908 * sh-opc.h (sh_table): Add SH3 support.
2910 Wed May 24 14:16:08 1995 Steve Chamberlain <sac@slash.cygnus.com>
2912 * sh-opc.h: Added bsrf and braf.
2914 Wed May 10 14:28:16 1995 Richard Earnshaw (rearnsha@armltd.co.uk)
2916 * arm-opc.h (arm_opcodes): Add 64-bit multiply patterns. Delete
2917 bogus [ls]fm{ea,fd} patterns.
2919 * arm-opc.h (arm_opcodes): Correct typos in stm, ldm, std, and ldc.
2920 * arm-dis.c (print_insn_arm): Make GIVEN a parameter, don't try and
2921 initialize it from memory. Make function static.
2922 (print_insn_{big,little}_arm): New functions.
2923 * disassemble.c (disassembler, case bfd_arch_arm): Disassemble for
2924 the correct endianness.
2926 Mon Apr 24 14:18:05 1995 Jason Molenda (crash@phydeaux.cygnus.com>
2928 * sh-opc.h (sh_nibble_type, sh_arg_type): remove trailing , from
2931 Wed Apr 19 14:07:03 1995 Michael Meissner <meissner@tiktok.cygnus.com>
2933 * m68k-dis.c (opcode): Finish change made by Kung Hsu on April
2934 17th, so that it builds again using GCC as the compiler.
2936 Tue Apr 18 12:14:51 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
2938 * mips-dis.c (print_insn_little_mips): Cast return value from
2939 bfd_getl32 from bfd_vma to unsigned long, because _print_insn_mips
2940 expects an unsigned long, and that might be fewer words of
2941 argument storage (e.g., if bfd_vma is long long on a 32-bit
2943 (print_insn_big_mips): Likewise with bfd_getb32 value.
2944 (_print_insn_mips): Now static.
2946 Mon Apr 17 12:23:28 1995 Kung Hsu <kung@rtl.cygnus.com>
2948 * m68k-dis.c: Take out #define BREAK_UP_BIG_DECL kludge, because
2949 gcc memory hog problem with initializer is fixed.
2951 Mon Apr 10 15:55:01 1995 Stan Shebs <shebs@andros.cygnus.com>
2953 Merge in support for Mac MPW as a host.
2954 (Old change descriptions retained for informational value.)
2956 * mpw-config.in (archname): Compute from the config.
2957 (BFD_MACHINES, ARCHDEFS): Put into mk.tmp.
2959 * mpw-config.in (target_arch): Compute from canonical target.
2960 (m68k, mips, powerpc, sparc): Add architectures.
2961 * mpw-make.in (disassemble.c.o): Add.
2962 (ALL_CFLAGS): Remove special flags (-mc68020 -mc68881 -model far).
2964 * mpw-config.in (BFD_MACHINES): Set to a default value.
2965 * mpw-make.in (BFD_MACHINES): Remove wired-in value.
2967 * mpw-make.in (CSEARCH): Add extra-include to search path.
2969 * mpw-config.in (varargs.h): Don't create.
2970 (sysdep.h): Create using forward-include.
2971 * mpw-make.in (CSEARCH): Add include/mpw to search path.
2973 * mpw-config.in: New file, MPW version of configure.in.
2974 * mpw-make.in: New file, MPW version of Makefile.in.
2976 Fri Mar 31 14:23:38 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
2978 * alpha-dis.c (print_insn_alpha): Put empty statement after
2981 Tue Mar 21 10:51:40 1995 Jeff Law (law@snake.cs.utah.edu)
2983 * hppa-dis.c (sign_extend): Delete, redundant with libhppa.h version.
2984 (low_sign_extend): Likewise.
2985 (get_field): Delete unused function.
2986 (set_field, deposit_14, deposit_21): Likewise.
2988 Fri Mar 17 15:55:53 1995 J.T. Conklin <jtc@rtl.cygnus.com>
2990 * i386-dis.c: Support for more pentium opcodes. From Guy Harris
2993 Tue Mar 14 00:52:57 1995 Ken Raeburn (raeburn@kr-pc.cygnus.com)
2995 Sat Feb 11 17:22:41 1995 Klaus Kaempf (kkaempf@didymus.rmi.de)
2997 * alpha-opc.h (OSF_ASMCODE): define
2998 print pal-code names as defined in App C of the
2999 Alpha Architecture Reference Manual
3001 * alpha-dis.c: cleaned up output
3002 print stylized code forms as defined in App A.4.3 of the
3003 Alpha Architecture Reference Manual
3005 Wed Mar 8 15:21:14 1995 Ian Lance Taylor <ian@cygnus.com>
3007 * mips-opc.c: Add new mips4 instructions. Don't set INSN_RFE for
3009 * mips-dis.c (print_insn_arg): Handle new argument types 'h', 'R',
3012 Wed Mar 8 02:54:05 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
3014 * m68k-dis.c (opcode): New function. Returns address of opcode
3015 table entry given index, even if the opcode table was split to
3016 work around gcc bugs.
3017 (print_insn_m68k): Call opcode instead of referencing m68k_opcodes
3019 (BREAK_UP_BIG_DECL): Make secondary array static and const.
3020 (reg_names): Now const.
3021 (print_insn_arg): Arrays cacheFieldName and names now const.
3022 (print_indexed): Array scales now const.
3024 Tue Mar 7 16:41:21 1995 Ian Lance Taylor <ian@cygnus.com>
3026 * ppc-opc.c: Sort recently added instructions by minor opcode
3027 number within major opcode number.
3029 Mon Mar 6 10:04:36 1995 Jeff Law (law@snake.cs.utah.edu)
3031 * hppa-dis.c: Include libhppa.h.
3033 Fri Feb 24 19:15:36 1995 Ian Lance Taylor <ian@cygnus.com>
3035 * mips-opc.c: Change dli to use M_DLI, and add dla.
3037 Mon Feb 20 23:54:38 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3039 * Makefile.in (ALL_MACHINES): Add w65-dis.o.
3041 Thu Feb 16 17:34:41 1995 Ian Lance Taylor <ian@cygnus.com>
3043 * mips-opc.c: Add r4650 mul instruction.
3045 Wed Feb 15 15:45:20 1995 Ian Lance Taylor <ian@cygnus.com>
3047 * mips-opc.c: Add uld and usd macros for unaligned double load and
3050 Tue Feb 14 13:17:37 1995 Michael Meissner <meissner@tiktok.cygnus.com>
3052 * ppc-opc.c (powerpc_opcodes): Add 403GA opcodes rfci, dccci,
3053 mfdcr, mtdcr, icbt, iccci.
3055 Thu Feb 9 12:28:13 1995 Stan Shebs <shebs@andros.cygnus.com>
3057 * i960-dis.c (struct tabent, struct sparse_tabent): Change the
3058 signed char fields to shorts, more portable.
3060 Wed Feb 8 17:29:29 1995 Stan Shebs <shebs@andros.cygnus.com>
3062 * i960-dis.c (struct tabent, struct sparse_tabent): Declare the
3063 char fields as signed chars, since they may have negative values.
3065 Mon Feb 6 10:52:06 1995 J.T. Conklin <jtc@rtl.cygnus.com>
3067 * i386-dis.c (dis386_twobyte): Add cpuid, From Charles Hannum
3068 (mycroft@netbsd.org).
3070 Mon Jan 30 12:38:00 1995 Ian Lance Taylor <ian@cygnus.com>
3072 From "Logg, Ed" <elogg@ea.com>:
3073 * ppc-opc.c (extract_bdm): Correct parenthezisation.
3074 * ppc-dis.c (print_insn_powerpc): Print .long before unrecognized
3077 Thu Jan 26 18:32:08 1995 Ian Lance Taylor <ian@cygnus.com>
3079 * ppc-opc.c: Changes based on patch from David Edelsohn
3080 <edelsohn@mhpcc.edu>.
3081 (powerpc_operands): Add operands SPRBAT and SPRG. Split TBR out of
3084 (insert_tbr): New static function.
3085 (extract_tbr): New static function.
3086 (XFXFXM_MASK, XFXM): Define.
3087 (XSPRBAT_MASK, XSPRG_MASK): Define.
3088 (powerpc_opcodes): Add instructions to access special registers by
3089 name. Add mtcr and mftbu.
3091 Tue Jan 17 10:56:43 1995 Ian Lance Taylor <ian@sanguine.cygnus.com>
3093 * mips-opc.c (P3): Define.
3094 (mips_opcodes): Add mad and madu.
3096 Sun Jan 15 16:32:59 1995 Steve Chamberlain <sac@splat>
3098 * configure.in: Add W65 support.
3099 * disassemble.c: Likewise.
3100 * w65-opc.h, w65-dis.c: New files.
3102 Wed Dec 28 22:15:33 1994 Steve Chamberlain (sac@jonny.cygnus.com)
3104 * h8300-dis.c (bfd_h8_disassemble): Add support for 2 bit
3107 Tue Dec 20 11:25:12 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
3109 * mips-opc.c: Add dli as a synonym for li.
3111 Thu Dec 8 18:23:31 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
3113 * alpha-dis.c (print_insn_alpha): Handle call_pal instruction, and
3114 print something for reserved opcode values, even if it won't
3117 * mips-dis.c (_print_insn_mips): When initializing, shift right
3118 and mask, to avoid sign extension problems on the Alpha.
3120 * m68k-dis.c (print_insn_arg, case 'J'): Handle buscr and pcr
3123 Wed Nov 23 22:34:51 1994 Steve Chamberlain (sac@jonny.cygnus.com)
3125 * sh-opc.h (mov.l gbr): Get direction right.
3126 * sh-dis.c (print_insn_shx): New function.
3127 (print_insn_shl, print_insn_sh): Call print_insn_shx to
3128 print opcodes with right byte order.
3130 Thu Nov 3 19:32:22 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
3132 * ns32k-dis.c (struct ns32k_option): Renamed from struct option,
3133 to avoid conflicts with getopt.
3135 Mon Oct 31 18:48:10 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
3137 * hppa-dis.c (print_insn_hppa): Read the instruction using
3138 bfd_getb32, so that it works on a little endian or 64 bit host.
3139 Remove unused local variable op.
3141 Tue Oct 25 17:07:57 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
3143 * mips-opc.c: Use or instead of addu for pseudo-op move, since
3144 addu does not work correctly if -mips3.
3146 Wed Oct 19 13:40:16 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
3148 * a29k-dis.c (print_special): Add special register names defined
3149 on 29030, 29040 and 29050.
3150 (print_insn): Handle new operand type 'I'.
3152 Wed Oct 12 11:59:55 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
3154 * Makefile.in (INSTALL): Use top level install.sh script.
3156 Wed Oct 5 19:16:29 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
3158 * sparc-dis.c: Rewrite to use bitfields, rather than a union, so
3159 that it works on a little endian host.
3161 Tue Oct 4 12:14:21 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
3163 * configure.in: Use ${config_shell} when running config.bfd.
3165 Wed Sep 21 18:49:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
3167 * mips-opc.c (mips_opcodes): "dabs" is only available with -mips3.
3169 Thu Sep 15 16:30:22 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
3171 * a29k-dis.c (print_insn): Print the opcode.
3173 Wed Sep 14 17:52:14 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
3175 * mips-opc.c (mips_opcodes): Set WR_t for sc and scd.
3177 Sun Sep 11 22:32:17 1994 Jeff Law (law@snake.cs.utah.edu)
3179 * hppa-dis.c (reg_names): Use r26-r23 for arg0-arg3.
3181 Tue Sep 6 11:37:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
3183 * mips-opc.c: Set INSN_STORE_MEMORY flag for all instructions
3184 which store a value into memory.
3186 Sun Sep 04 17:58:10 1994 Richard Earnshaw (rwe@pegasus.esprit.ec.org)
3188 * configure.in, Makefile.in, disassemble.c: Add support for the ARM.
3189 * arm-dis.c, arm-opc.h: New files.
3191 Fri Aug 5 14:00:05 1994 Stan Shebs (shebs@andros.cygnus.com)
3193 * Makefile.in (ns32k-dis.o): Add dependency.
3194 * ns32k-dis.c (print_insn_arg): Declare initialized local as
3195 string, not as array of chars.
3197 Thu Jul 28 18:14:16 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
3199 * sparc-dis.c (print_insn_sparc): Handle new operand type 'x'.
3201 * sparc-opc.c: Added sparclite extended FP operations, and
3202 versions of v9 impdep* instructions permitting specification of
3205 Tue Jul 26 16:36:03 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
3207 * i960-dis.c (reg_names): Now const.
3208 (struct sparse_tabent): New type, copied from array type in mem
3210 (ctrl): Local static array ctrl_tab now const.
3211 (cobr): Local static array cobr_tab now const.
3212 (mem): Local variables reg1, reg2, reg3 now point to const. Local
3213 static variable mem_tab no longer explicitly initialized. Changed
3214 mem_init to const array of struct sparse_tabent.
3215 (reg): Local static variable reg_tab no longer explicitly
3216 initialized. Changed reg_init to const array of struct
3218 (ea): Local static array scale_tab now const.
3220 * i960-dis.c (reg): Added i960JX instructions to reg_init table.
3223 Tue Jul 19 21:00:00 1994 DJ Delorie (dj@ctron.com)
3225 * configure.bat: the disassember needs to be enabled for
3226 "objdump -d" to work in djgpp.
3228 Wed Jul 13 18:01:58 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
3230 * ns32k-dis.c: Deleted all code in "#ifdef GDB".
3231 (invalid_float): Enabled general version, doesn't require running
3232 on ns32k host. Changed to take char* argument, and test for
3233 explicitly specified sizes, instead of using sizeof() on host CPU
3235 (INVALID_FLOAT): Cast first argument.
3236 (opt_u, opt_U, opt_O, opt_C, opt_S, list_P532, list_M532,
3237 list_P032, list_M032): Now const.
3238 (optlist, list_search): Made appropriate arguments now point to
3240 (print_insn_arg): Changed static array of one-character-string
3241 pointers into a static const array of characters; fixed sprintf
3242 statement accordingly.
3244 Sun Jul 10 00:27:47 1994 Ian Dall (dall@hfrd.dsto.gov.au)
3246 * opcodes/ns32k-dis.c: Semi-new file. Had apparently been dropped
3247 from distribution. A ns32k-dis.c from a previous distribution has
3248 been brought up to date and supports the new interface.
3250 * disassemble.c: define ARCH_ns32k and add case bfd_arch_ns32k.
3252 * configure.in: add bfd_ns32k_arch target support.
3254 * Makefile.in: add ns32k-dis.o to ALL_MACHINES.
3255 Add ns32k-dis.c to CFILES. Add dependencies for ns32k-dis.o.
3257 Wed Jun 29 22:10:37 1994 Steve Chamberlain (sac@cygnus.com)
3259 * h8300-dis.c (bfd_h8_disassemble): Get 16bit branch
3262 Tue Jun 28 13:22:06 1994 Stan Shebs (shebs@andros.cygnus.com)
3264 * h8300-dis.c, mips-dis.c: Don't use true and false.
3266 Thu Jun 23 12:53:19 1994 David J. Mackenzie (djm@rtl.cygnus.com)
3268 * configure.in: Change --with-targets to --enable-targets.
3270 Wed Jun 22 13:38:32 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
3272 * mips-dis.c (_print_insn_mips): Build a static hash table mapping
3273 opcodes to the first instruction with that opcode, to speed
3274 disassembly of large files. From ralphc@pyramid.com (Ralph
3277 Tue Jun 7 12:49:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3279 * Makefile.in (mostlyclean): Fix typo (was mostyclean).
3281 Wed May 11 22:32:00 1994 DJ Delorie (dj@ctron.com)
3283 * configure.bat: update to latest makefile.in
3285 Sat May 7 17:13:21 1994 Steve Chamberlain (sac@cygnus.com)
3287 * a29k-dis.c (print_insn): Print 'x' type operand in hex.
3288 * h8300-dis.c (bfd_h8_disassemble): Print 16bit rels correctly.
3289 * sh-dis.c (print_insn_sh): Don't recur endlessly if delay
3290 slot insn is in a delay slot.
3291 * z8k-opc.h: (resflg): Fix patterns.
3292 * h8500-opc.h Fix CR insn patterns.
3294 Fri May 6 14:34:46 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3296 * ppc-opc.c (powerpc_opcodes): Put PowerPC versions of "cmp" and
3297 "cmpl" before POWER versions, so that gas -many uses them.
3299 Thu Apr 28 18:32:36 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
3301 * disassemble.c: New file.
3302 * Makefile.in (OFILES): Add disassemble.o.
3303 (disassemble.o): Provide dependencies; compile with $(ARCHDEFS).
3304 * configure.in: Define ARCHDEFS in Makefile. Code taken from
3305 binutils/configure.in.
3307 * m68k-dis.c (print_insn_m68k): If F_ALIAS flag is set, skip the
3308 opcode being examined.
3310 Thu Apr 21 17:08:40 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3312 * ppc-opc.c (powerpc_operands): Added RAL, RAM and RAS.
3313 (insert_ral, insert_ram, insert_ras): New functions.
3314 (powerpc_opcodes): Use RAL for load with update, RAM for lmw, and
3315 RAS for store with update.
3317 Sat Apr 16 23:41:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3319 * ppc-opc.c (powerpc_opcodes): Correct fcir. From David Edelsohn
3320 (edelsohn@npac.syr.edu).
3322 Wed Apr 6 17:11:45 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3324 * mips-opc.c (mips_opcodes): Correct operands of "nor" with an
3327 Mon Apr 4 16:30:46 1994 Doug Evans (dje@canuck.cygnus.com)
3329 * sparc-opc.c (sparc_opcodes): Fix "rd %fprs,%l0".
3331 Mon Apr 4 13:22:00 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3333 * ppc-opc.c (powerpc_operands): The signedp field has been
3334 removed, so don't initialize it. Set the PPC_OPERAND_SIGNED flag
3335 instead. Add new operand SISIGNOPT.
3336 (powerpc_opcodes): For lis, liu, addis, and cau use SISIGNOPT.
3337 Based on patch from David Edelsohn (edelsohn@npac.syr.edu).
3338 * ppc-dis.c (print_insn_powerpc): Check PPC_OPERAND_SIGNED rather
3341 Wed Mar 30 00:31:49 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3343 * i386-dis.c (struct private): Renamed to dis_private. `private'
3344 is a reserved word for dynix cc.
3346 Mon Mar 28 13:00:15 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3348 * configure.in: Change error message to refer to bfd/config.bfd
3349 rather than bfd/configure.in.
3351 Mon Mar 28 12:28:30 1994 David Edelsohn (edelsohn@npac.syr.edu)
3353 * ppc-opc.c: Define POWER2 as short alias flag.
3354 (powerpc_opcodes): Add POWER/2 opcodes lfq*, stfq*, fcir[z], and
3357 Wed Mar 23 12:23:05 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3359 * i960-dis.c (print_insn_i960): Don't read a second word for
3360 opcodes 0, 1, 2 and 3.
3362 Wed Mar 16 15:37:58 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3364 * configure.in: Don't build m68881-ext.o for bfd_m68k_arch.
3366 Mon Mar 14 14:53:50 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3368 * m68881-ext.c: Removed; no longer used.
3369 * Makefile.in: Changed accordingly.
3371 * m68k-dis.c (ext_format_68881): Don't declare.
3372 (print_insn_m68k): If an instruction uses place 'i', it uses at
3373 least four fixed bytes.
3374 (print_insn_arg): Don't bump p by 2 for case 'I', place 'i'. For
3375 extended float, convert to double using floatformat_to_double, not
3376 ieee_extended_to_double, and fetch the data before converting it.
3378 Tue Mar 8 18:12:25 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3380 * mips-opc.c: It's sqrt.s, not sqrt.w. From
3381 davidj@ICSI.Berkeley.EDU (David Johnson).
3383 Tue Feb 8 16:55:27 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3385 * ppc-opc.c (powerpc_opcodes): The POWER uses bdn[l][a] where the
3386 PowerPC uses bdnz[l][a].
3388 Tue Feb 8 00:32:28 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3390 * dis-buf.c, i386-dis.c: Include sysdep.h.
3392 Mon Feb 7 19:22:23 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3394 * configure.in (bfd_powerpc_arch): Use ppc-dis.o and ppc-opc.o.
3396 * ppc-opc.c (powerpc_opcodes): Mark POWER instructions supported
3397 by Motorola PowerPC 601 with PPC_OPCODE_601.
3398 * ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc):
3399 Disassemble Motorola PowerPC 601 instructions as well as normal
3400 PowerPC instructions.
3402 Sun Feb 6 07:45:17 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
3404 * i960-dis.c (reg, mem): Just use a static array instead of
3407 Sat Feb 5 00:04:02 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
3409 * hppa-dis.c (print_insn_hppa): For '?' and '@' only adjust the
3410 condition name index if this is for a negated condition.
3412 * hppa-dis.c (print_insn_hppa): No space before 'H' operand.
3413 Floating point format for 'H' operand is backwards from normal
3414 case (0 == double, 1 == single). For '4', '6', '7', '9', and '8'
3415 operands (fmpyadd and fmpysub), handle bizarre register
3416 translation correctly for single precision format.
3418 * hppa-dis.c (print_insn_hppa): Do not emit a space after 'F'
3419 or 'I' operands if the next format specifier is 'M' (fcmp
3420 condition completer).
3422 Feb 4 23:38:03 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3424 * ppc-opc.c (powerpc_operands): New operand type MBE to handle a
3425 single number giving a bitmask for the MB and ME fields of an M
3426 form instruction. Change NB to accept 32, and turn it into 0;
3427 also turn 0 into 32 when disassembling. Seperated SH from NB.
3428 (insert_mbe, extract_mbe): New functions.
3429 (insert_nb, extract_nb): New functions.
3430 (SC_MASK): Mask out SA and LK bits.
3431 (powerpc_opcodes): Change "cal" to use RT, D, RA rather than RT,
3432 RA, SI. Change "liu" and "cau" to use UI rather than SI. Mark
3433 "bctr" and "bctrl" as accepted by POWER. Change "rlwimi",
3434 "rlimi", "rlwimi.", "rlimi.", "rlwinm", "rlinm", "rlwinm.",
3435 "rlinm.", "rlmi", "rlmi.", "rlwnm", "rlnm", "rlwnm.", "rlnm." to
3436 use MBE rather than MB. Add "mfmq" and "mtmq" POWER instructions.
3437 (powerpc_macros): Define table of macro definitions.
3438 (powerpc_num_macros): Define.
3440 * ppc-dis.c (print_insn_powerpc): Don't skip optional operands
3441 if PPC_OPERAND_NEXT is set.
3443 Sat Jan 22 23:10:07 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3445 * i960-dis.c (print_insn_i960): Make buffer bfd_byte instead of
3446 char. Retrieve contents using bfd_getl32 instead of shifting.
3448 Fri Jan 21 19:01:39 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3450 * ppc-opc.c: New file. Opcode table for PowerPC, including
3451 opcodes for POWER (RS/6000).
3452 * ppc-dis.c: New file. PowerPC and Power (RS/6000) disassembler.
3453 * Makefile.in (ALL_MACHINES): Add ppc-dis.o and ppc-opc.o.
3454 (CFILES): Add ppc-dis.c.
3455 (ppc-dis.o, ppc-opc.o): New targets.
3456 * configure.in: Build ppc-dis.o and ppc-opc.o for bfd_rs6000_arch.
3458 Mon Jan 17 20:05:49 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
3460 * hppa-dis.c (print_insn_hppa): Handle 'N' in assembler template.
3461 No space before 'u', 'f', or 'N'.
3463 Sun Jan 16 14:20:16 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
3465 * i386-dis.c (print_insn_i386): Add FIXME comment regarding reading
3466 farther than we should.
3468 * i386-dis.c (dis386): Use Yb and Yv for scasb and scasS.
3470 Thu Jan 6 12:38:05 1994 David J. Mackenzie (djm@thepub.cygnus.com)
3472 * sparc-dis.c m68k-dis.c alpha-dis.c a29k-dis.c: Fix comments.
3474 Wed Jan 5 11:56:21 1994 David J. Mackenzie (djm@thepub.cygnus.com)
3476 * i960-dis.c (print_insn_i960): Only read word2 if the instruction
3477 needs it, to prevent reading past the end of a section.
3479 Wed Nov 17 17:20:12 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3481 * mips-opc.h: Use macro for j instruction, to support SVR4 PIC.
3482 Removed t,A case for la; always use t,A(b) case.
3484 Mon Nov 8 12:37:36 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3486 From Ted Lemen <mellon@pepper.ncd.com>
3487 * mips-dis.c (print_insn_arg): Handle 'k'.
3488 * mips-opc.c: Make cache use k, not t.
3490 Sun Nov 7 23:52:34 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3492 * alpha-opc.h, alpha-dis.c (print_insn_alpha): Add
3493 FLOAT_MEMORY_FORMAT_CODE, FLOAT_BRANCH_FORMAT_CODE, correct
3494 FLOAT_FORMAT_CODE to put out floating point register names.
3496 Mon Nov 1 18:17:51 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3498 * mips-opc.c: Use macros for jal variants, to support SVR4 PIC.
3500 Thu Oct 28 17:42:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3502 * a29k-dis.c (print_insn): Use 0x%08x, not 0x%8x.
3504 Wed Oct 27 11:48:01 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3506 * mips-opc.c (dsll, dsra, dsrl): Added '>' cases for shift counts
3507 larger than 32. Moved dsxx32 variants first for disassembler.
3509 Mon Oct 25 11:33:14 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
3511 * z8kgen.c, z8k-opc.h: Add full lda information.
3513 Tue Oct 19 12:39:25 1993 Jeffrey A Law (law@cs.utah.edu)
3515 * hppa-dis.c (print_insn_hppa): Do not emit a space after
3516 movb instructions. Any necessary space will be emitted by
3517 the code to handle nullification completers.
3519 Wed Oct 13 16:19:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3521 * mips-opc.c: Moved l.d down so that it disassembles as ldc1.
3523 Fri Oct 8 02:34:21 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3525 * alpha-opc.h: Add ldl_l, fix typo for ldq_u.
3526 * alpha-dis.c (print_insn_alpha): Add code for PAL_FORMAT_CODE.
3528 Tue Oct 5 17:47:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3530 * mips-opc.c: Correct lwu opcode value (book had it wrong).
3532 Thu Sep 30 11:26:18 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
3534 * z8k-dis.c (FETCH_DATA): get just the right amount of data.
3535 (unpack_instr): Cope with ARG_IMM4M1 type instructions.
3537 Wed Sep 29 16:24:49 1993 K. Richard Pixley (rich@sendai.cygnus.com)
3539 * m88k-dis.c (m88kdis): comment change. Remove space after
3541 (printop): handle new arg types DEC and XREG for m88110.
3543 Tue Sep 28 19:20:16 1993 Jeffrey A Law (law@snake.cs.utah.edu)
3545 * hppa-dis.c (print_insn_hppa): Handle 'z' operand
3546 type for absolute branch addresses. Delete special
3547 "ble" and "be" code in 'W' operand code.
3549 Fri Sep 24 14:08:33 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3551 * mips-opc.c: Set hazard information correctly for branch
3552 likely instructions.
3554 Fri Sep 17 04:41:17 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3556 * alpha-dis.c (print_insn_alpha), alpha-opc.h: Fix bugs, use
3557 info->fprintf_func for printing and info->print_address_func for
3560 Wed Sep 15 12:12:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3562 * mips-opc.c: Set INSN_TRAP for tXX instructions.
3564 Thu Sep 9 10:11:27 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3566 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson):
3567 Corrected second case of "b" for disassembler.
3569 Tue Sep 7 14:25:15 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3571 * mips-dis.c, m88k-dis.c: Don't include libbfd.h. Changed calls
3572 to BFD swapping routines to correspond to BFD name changes.
3574 Thu Sep 2 10:35:25 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3576 * mips-opc.c: Change div machine instruction to be z,s,t rather
3577 than s,t. Change div macro to be d,v,t rather than d,s,t.
3578 Likewise for divu, ddiv, ddivu. Added z,s,t case for drem, dremu,
3579 rem and remu which generates only the corresponding div
3580 instruction. This is for compatibility with the MIPS assembler,
3581 which only generates the simple machine instruction when an
3582 explicit destination of $0 is used.
3583 * mips-dis.c (print_insn_arg): Handle 'z' (always register zero).
3585 Thu Aug 26 17:41:44 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3587 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Set
3588 WR_31 hazard for bal, bgezal, bltzal.
3590 Thu Aug 26 17:20:02 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3592 * hppa-dis.c (print_insn_hppa): Use print function
3593 from within the disassemble_info, not fprintf_filtered.
3595 Wed Aug 25 13:51:40 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3597 * hppa-dis.c (print_insn_hppa): Handle '|' like '>'. (From Jeff
3598 Law, law@cs.utah.edu.)
3600 Mon Aug 23 12:44:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3602 * mips-opc.c ("absu"): Removed.
3605 Fri Aug 20 10:52:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3607 * mips-opc.c: Added r6000 and r4000 instructions and macros.
3608 Changed hazard information to distinguish between memory load
3609 delays and coprocessor load delays.
3611 Wed Aug 18 15:39:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3613 * mips-opc.c: li.d uses "T,L", not "S,F". Added li.s.
3615 Tue Aug 17 09:44:42 1993 David J. Mackenzie (djm@thepub.cygnus.com)
3617 * configure.in: Don't pass cpu to config.bfd.
3619 Tue Aug 17 12:23:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3621 * m88k-dis.c (m88kdis): Make class unsigned.
3623 Thu Aug 12 15:08:18 1993 Ian Lance Taylor (ian@cygnus.com)
3625 * alpha-dis.c (print_insn_alpha): One branch format case was
3626 missing the instruction name.
3628 Wed Aug 11 19:29:39 1993 David J. Mackenzie (djm@thepub.cygnus.com)
3630 * Makefile.in (ALL_MACHINES): Renamed from DIS_LIBS.
3631 Add the arch-specific auxiliary files.
3632 (OFILES): Remove the arch-specific auxiliary files
3633 and use BFD_MACHINES instead of DIS_LIBS.
3634 * configure.in: Set BFD_MACHINES based on --with-targets option.
3636 Thu Aug 12 12:04:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3638 * mips-opc.c: Added lwc1 E,A(b) to go with lwc1 T,A(b). Similarly
3641 Sun Aug 8 15:09:30 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3643 * sparc-opc.c: Change CONST to const to deal with gcc
3644 -Dconst=__const -traditional.
3646 Fri Aug 6 10:58:55 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3648 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Took
3649 coprocessor instructions out of #if 0, and made them use new
3652 Thu Aug 5 17:11:06 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3654 * sparc-dis.c: Include ansidecl.h before opcodes/sparc.h.
3656 Fri Jul 30 18:48:15 1993 John Gilmore (gnu@cygnus.com)
3658 * sparc-opc.c: Add F_JSR, F_UNBR, or F_CONDBR flags to each branch
3659 instruction, for use by the disassembler.
3661 * sparc-dis.c (SEX): Add sign extension macro. Replace many
3662 hand-coded sign extensions that depended on 32-bit host ints.
3663 FIXME, we still depend on big-endian host bitfield ordering.
3664 (sparc_print_insn): Set the insn_info_valid field, and the
3665 other fields that describe the instruction being printed.
3667 Tue Jul 27 17:04:58 1993 Jim Wilson (wilson@sphagnum.cygnus.com)
3669 * sparc-opc.c (call): Accept all 6 addressing modes valid for
3670 `jmp' instead of just one of them.
3672 Wed Jul 21 11:43:32 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
3674 * hppa-dis.c: Move floating registers from reg_names to fp_reg_names.
3675 (fput_fp_reg_r): Renamed from fput_reg_r.
3676 (fput_fp_reg): New function.
3677 (print_insn_hppa): Use fput_fp_reg{,_r} where appropriate.
3679 * hppa-dis.c (print_insn_hppa, cases 'a', 'd'): Print space afterwards.
3681 * hppa-dis.c (print_insn_hppa, case 'd'): Use GET_COND not GET_FIELD.
3683 Mon Jul 19 13:52:21 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
3685 * hppa-dis.c (print_insn_hppa): Use extract_5r_store for 'r'.
3687 * hppa-dis.c (print_insn_hppa, case '>'): If next character is 'n',
3688 don't output a space.
3690 * hppa-dis.c (float_format_names): 10 is undefined, and 11 is quad.
3692 Sun Jul 18 16:30:02 1993 Jim Kingdon (kingdon@rtl.cygnus.com)
3694 * mips-opc.c: New file, containing opcode table from
3695 ../include/opcode/mips.h.
3696 * Makefile.in: Add it.
3698 Thu Jul 15 12:37:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3700 * m88k-dis.c: New file, moved in from gdb and changed to use the
3701 new dis-asm.h disassembler interface.
3702 * Makefile.in (DIS_LIBS): Added m88k-dis.o.
3703 (m88k-dis.o): New target.
3705 Tue Jul 13 10:04:16 1993 Ian Lance Taylor (ian@cygnus.com)
3707 * mips-dis.c (print_insn_arg, _print_insn_mips): Made pointer to
3708 argument string const char * to correspond to opcode/mips.h.
3710 Tue Jul 6 15:18:37 1993 Ian Lance Taylor (ian@cygnus.com)
3712 * mips-dis.c: Updated to account for name changes in new version
3714 * Makefile.in: Added header file dependencies.
3716 Sat Jul 3 23:47:56 1993 Doug Evans (dje@canuck.cygnus.com)
3718 * h8300-dis.c (bfd_h8_disassemble): Correct fetching of instruction.
3720 Thu Jul 1 12:23:38 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3722 * m68k-dis.c (NEXTWORD, NEXTLONG): Use ((x) ^ 0x8000) - 0x8000 to sign
3723 extend, rather than shifts.
3725 Sun Jun 20 20:56:56 1993 Ken Raeburn (raeburn@poseidon.cygnus.com)
3727 * Makefile.in: Undo 15 June change.
3729 Fri Jun 18 14:15:15 1993 Per Bothner (bothner@deneb.cygnus.com)
3731 * m68k-dis.c (print_insn_arg): Change return value to byte count
3733 * m68k-dis.c: Re-write to detect invalid operands before
3734 printing anything, so we can handle this the same way we
3735 handle invalid opcodes.
3737 Thu Jun 17 15:01:36 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
3739 * sh-dis.c, sh-opc.h: Understand some more opcodes.
3741 Wed Jun 16 13:48:05 1993 Ian Lance Taylor (ian@cygnus.com)
3743 * hppa-dis.c: Include <ansidecl.h> and sysdep.h before other
3746 Tue Jun 15 21:45:26 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3748 * sparc-dis.c: Don't declare qsort, since sysdep.h might.
3750 * configure.in: Do make sysdep.h link.
3751 * Makefile.in: Search ../include. Don't search ../bfd.
3753 Tue Jun 15 13:36:10 1993 Stu Grossman (grossman@cygnus.com)
3755 Changes from Jeff Law, law@cs.utah.edu:
3756 * hppa-dis.c: Fix typo. 'a' and 'd' were reversed.
3757 Do not print a space before the completers specified by
3760 Fri Jun 11 18:40:21 1993 Ken Raeburn (raeburn@cygnus.com)
3762 * mips-dis.c: No longer need to bomb out if HOST_64_BIT is
3763 defined, since gdb has been fixed.
3765 Changes from Jeff Law, law@cs.utah.edu:
3766 * hppa-dis.c (print_insn_hppa): Last argument to fput_reg,
3767 fput_reg_r, fput_creg, fput_const, and fputs_filtered should
3768 be a *disassemble_info, not a *FILE.
3769 * hppa-dis.c: Support 'd', '!', and 'a'.
3770 * hppa-dis.c: Support 's' to extract a 2 bit space register.
3771 * hppa-dis.c: Delete cases which are no longer needed.
3773 Fri Jun 11 07:53:48 1993 Jim Kingdon (kingdon@cygnus.com)
3775 * m68k-dis.c (print_insn_{m68k,arg}): Add MMU codes.
3777 Tue Jun 8 12:25:01 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
3779 * h8300-dis.c: New file, removed from bfd/cpu-h8300.c, with
3782 Mon Jun 7 12:58:49 1993 Per Bothner (bothner@rtl.cygnus.com)
3784 * Makefile.in (CSEARCH): Add -I../bfd for sysdep.h and bfd.h.
3785 * configure.in: No longer need to configure to get sysdep.h.
3787 Thu Jun 3 15:56:49 1993 Stu Grossman (grossman@cygnus.com)
3789 * Patches from Jeffrey Law <law@cs.utah.edu>.
3790 * hppa-dis.c: Support 'I', 'J', and 'K' in output
3791 templates for 1.1 FP computational instructions.
3793 Tue May 25 13:05:48 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3795 * h8500-dis.c (print_insn_h8500): Address argument is type
3797 * z8k-dis.c (print_insn_z8k, print_insn_z8001, print_insn_z8002):
3800 * h8500-opc.h (addr_class_type): No comma at end of enumerator.
3801 * sh-opc.h (sh_nibble_type, sh_arg_type): Ditto.
3803 * sparc-dis.c (compare_opcodes): Move static declaration to
3806 Fri May 21 14:17:37 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3808 * sparc-dis.c (print_insn_sparc): Implement 'n' argument for unimp
3809 instruction, remove unimp hack from 'l' argument.
3811 Wed May 19 15:35:54 1993 Stu Grossman (grossman@cygnus.com)
3813 * z8k-dis.c (fetch_data): Use unsigned char to make ancient gcc's
3816 Fri May 14 15:22:46 1993 Ian Lance Taylor (ian@cygnus.com)
3818 * Based on patches from davidj@ICSI.Berkeley.EDU (David Johnson):
3819 * mips-dis.c (print_insn_arg): Handle 'C' for general coprocessor
3822 Fri May 14 00:09:14 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3824 * hppa-dis.c: Include dis-asm.h before sysdep.h. Changed some
3825 arrays of string pointers to 2-d arrays of chars, to save
3828 Thu May 6 20:51:17 1993 Fred Fish (fnf@cygnus.com)
3830 * a29k-dis.c, alpha-dis.c, i960-dis.c, sparc-dis.c, z8k-dis.c:
3831 Cast second arg to read_memory_func to "bfd_byte *", as necessary.
3833 Tue May 4 20:31:10 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3835 * hppa-dis.c: New file from Utah, adapted to new disassembler
3837 * Makefile.in: Include it.
3839 Mon Apr 26 18:17:42 1993 Steve Chamberlain (sac@thepub.cygnus.com)
3841 * sh-dis.c, sh-opc.h: New files.
3843 Fri Apr 23 18:51:22 1993 Steve Chamberlain (sac@thepub.cygnus.com)
3845 * alpha-dis.c, alpha-opc.h: New files.
3847 Tue Apr 6 12:54:08 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3849 * mips-dis.c: Sign extend 'j' and 'b' arguments, delta is a signed
3852 Mon Apr 5 17:37:37 1993 John Gilmore (gnu@cygnus.com)
3854 * sparc-dis.c: Make "ta" the default trap instruction, "t" the alias.
3856 Fri Apr 2 07:24:27 1993 Ian Lance Taylor (ian@cygnus.com)
3858 * a29k-dis.c, sparc-dis.c, sparc-opc.c: Use CONST rather than
3861 Thu Apr 1 11:20:43 1993 Jim Kingdon (kingdon@cygnus.com)
3863 * sparc-dis.c: Use fprintf_func a few places where I forgot,
3864 and double percent signs a few places.
3866 * a29k-dis.c, i960-dis.c: New, merged from gdb and binutils.
3868 * i386-dis.c, m68k-dis.c, mips-dis.c, sparc-dis.c:
3869 Use info->print_address_func not print_address.
3871 * dis-buf.c (generic_print_address): New function.
3873 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3875 * Makefile.in: Add sparc-dis.c.
3876 sparc-dis.c: New file, merges binutils and gdb versions as follows:
3878 Add `add' instruction to the set that get checked
3879 for a preceding `sethi' in order to print an absolute address.
3880 * (print_insn): Disassembly prefers real instructions.
3881 (is_delayed_branch): Speed up.
3882 * sparc-opcode.h: Add ALIAS bit to aliases. Fix up opcode tables.
3883 Still missing some float ops, and needs testing.
3884 * sparc-pinsn.c (print_insn): Eliminate 'set' test, subsumed by
3885 F_ALIAS. Use printf, not fprintf, when not passing a file
3887 (compare_opcodes): Check that identical instructions have
3888 identical opcodes, complain otherwise.
3891 * Include reg_names.
3893 Use dis-asm.h/read_memory_func interface.
3895 Wed Mar 31 20:49:06 1993 K. Richard Pixley (rich@rtl.cygnus.com)
3897 * h8500-dis.c, i386-dis.c, m68k-dis.c, z8k-dis.c (fetch_data):
3898 deliberately return non-zero to setjmp from longjmp. Otherwise
3899 this code fails to compile.
3901 Wed Mar 31 17:04:31 1993 Stu Grossman (grossman@cygnus.com)
3903 * m68k-dis.c: Fix prototype for fetch_arg().
3905 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3907 * dis-buf.c: New file, for new read_memory_func interface.
3908 Makefile.in (OFILES): Include it.
3909 m68k-dis.c, i386-dis.c, h8500-dis.c, mips-dis.c, z8k-dis.c:
3910 Use new read_memory_func interface.
3912 Mon Mar 29 14:02:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
3914 * h8500-dis.c (print_insn_h8500): Get sign of fp offsets right.
3915 * h8500-opc.h: Fix couple of opcodes.
3917 Wed Mar 24 02:03:36 1993 david d `zoo' zuhn (zoo at poseidon.cygnus.com)
3919 * Makefile.in: add dvi & installcheck targets
3921 Mon Mar 22 18:55:04 1993 John Gilmore (gnu@cygnus.com)
3923 * Makefile.in: Update for h8500-dis.c.
3925 Fri Mar 19 14:27:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
3927 * h8500-dis.c, h8500-opc.h: New files
3929 Thu Mar 18 14:12:37 1993 Per Bothner (bothner@rtl.cygnus.com)
3931 * mips-dis.c, z8k-dis.c: Converted to use interface defined in
3932 ../include/dis-asm.h.
3933 * m68k-dis.c: New file (merge of ../binutils/m68k-pinsn.c
3934 and ../gdb/m68k-pinsn.c).
3935 * i386-dis.c: New file (merge of ../binutils/i386-pinsn.c
3936 and ../gdb/i386-pinsn.c).
3937 * m68881-ext.c: New file. Moved definition of
3938 ext_format ext_format_68881 from ../gdb/m68k-tdep.c.
3939 * Makefile.in: Adjust for new files.
3940 * i386-dis.c: Patches from John Hassey (hassey@dg-rtp.dg.com).
3941 * m68k-dis.c: Recognize '9' placement code, so (say) pflush
3942 can be dis-assembled.
3944 Wed Feb 17 09:19:47 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3946 * mips-dis.c (print_insn_arg): Now returns void.
3948 Mon Jan 11 16:09:16 1993 Fred Fish (fnf@cygnus.com)
3950 * mips-dis.c (ansidecl.h): Include for benefit of sysdep.h
3951 files that use the macros.
3953 Thu Jan 7 13:15:17 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3955 * mips-dis.c: New file, from gdb/mips-pinsn.c.
3956 * Makefile.in (DIS_LIBS): Added mips-dis.o.
3957 (CFILES): Added mips-dis.c.
3959 Thu Jan 7 07:36:33 1993 Steve Chamberlain (sac@thepub.cygnus.com)
3961 * z8k-dis.c (print_insn_z8001, print_insn_z8002): new routines
3962 * z8kgen.c, z8k-opc.h: fix sizes of some shifts.
3964 Tue Dec 22 15:42:44 1992 Per Bothner (bothner@rtl.cygnus.com)
3966 * Makefile.in: Improve *clean rules.
3967 * configure.in: Allow a default host.
3969 Tue Nov 17 19:53:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
3971 * Makefile.in: also use -I$(srcdir)/../bfd, since some sysdep
3972 files include other sysdep files
3974 Thu Nov 12 16:10:37 1992 Steve Chamberlain (sac@thepub.cygnus.com)
3976 * z8k-dis.c z8k-opc.h z8kgen.c: checkpoint
3978 Fri Oct 9 04:56:05 1992 John Gilmore (gnu@cygnus.com)
3980 * configure.in: For host support, use ../bfd/configure.host
3981 so it stays in sync with the ../bfd/hosts database.
3983 Thu Oct 1 23:38:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
3985 * configure.in: use cpu-vendor-os triple instead of nested cases
3987 Wed Sep 30 16:09:20 1992 Michael Werner (mtw@cygnus.com)
3989 * z8k-dis.c (unparse_instr): fix bug where opcode returned was
3990 *always* the wrong one.
3992 Wed Sep 30 07:42:17 1992 Steve Chamberlain (sac@thepub.cygnus.com)
3994 * z8kgen.c: added copyright info
3996 Tue Sep 29 12:20:21 1992 Steve Chamberlain (sac@thepub.cygnus.com)
3998 * z8k-dis.c (unparse_instr): prettier tabs
3999 * z8kgen.c -> z8k-opc.h: bug fixes in tables
4001 Fri Sep 25 12:50:32 1992 Stu Grossman (grossman at cygnus.com)
4003 * configure.in: Add ncr* configuration.
4004 * z8k-dis.c (struct instr_data_s): Make instr_asmsrc char to make
4005 picayune ANSI compilers happy.
4007 Sep 20 08:50:55 1992 Fred Fish (fnf@cygnus.com)
4009 * configure.in (i386): Make i386 and i486 synonymous for now.
4010 * configure.in (i[34]86-*-sysv4): Add my_host definition.
4012 Fri Sep 18 17:01:23 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
4014 * Makefile.in (install): Fix typo.
4016 Fri Sep 18 02:04:24 1992 John Gilmore (gnu@cygnus.com)
4018 * Makefile.in (make): Remove obsolete crud.
4019 (sparc-opc.o): Avoid Sun Make VPATH bug.
4021 Tue Sep 8 17:29:27 1992 K. Richard Pixley (rich@sendai.cygnus.com)
4023 * Makefile.in: since there are no SUBDIRS, remove rule and
4024 references of subdir_do.
4026 Tue Sep 8 17:02:58 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
4028 * Makefile.in (install): Get the library name right here too.
4029 Don't install bfd.h, since it's unrelated to this library. No
4030 subdirs to recurse into, either.
4031 (CFILES): The source file has a .c suffix, not .o.
4033 * sparc-opc.c: New file, moved from BFD.
4034 * Makefile.in (OFILES): Build it.
4036 Thu Sep 3 16:59:20 1992 Michael Werner (mtw@cygnus.com)
4038 * z8k-dis.c: fixed forward refferences of some declarations.
4040 Mon Aug 31 16:09:45 1992 Michael Werner (mtw@cygnus.com)
4042 * Makefile.in: get the name of the library right
4044 Mon Aug 31 13:47:35 1992 Steve Chamberlain (sac@thepub.cygnus.com)
4046 * z8k-dis.c: knows how to disassemble z8k stuff
4047 * z8k-opc.h: new file full of z8000 opcodes
4051 version-control: never