opcodes/ChangeLog

   1 2009-10-06  Nick Clifton  <nickc@redhat.com>
   2
   3         * po/fi.po: Updated Finnish translation.
   4
   5 2009-10-03  Andreas Schwab  <schwab@linux-m68k.org>
   6
   7         * opc2c.c: Include "libiberty.h" and <errno.h>.
   8         (orig_filename): Constify.
   9         (dump_lines): Fix line number directive.
  10         (main): Set orig_filename to basename of input file.  Use
  11         xstrerror.
  12
  13         * Makefile.am (rx-dis.lo): Remove explicit dependencies.
  14         ($(srcdir)/rx-decode.c): Use @MAINT@.  Use $(EXEEXT_FOR_BUILD)
  15         instead of $(EXEEXT).
  16         (opc2c$(EXEEXT_FOR_BUILD)): Renamed from opc2c$(EXEEXT) and use
  17         $(LINK_FOR_BUILD).  Link with libiberty.
  18         (MOSTLYCLEANFILES): Add opc2c$(EXEEXT_FOR_BUILD).
  19         (MAINTAINERCLEANFILES): Add $(srcdir)/rx-decode.c.
  20         * Makefile.in: Regenerated.
  21         * rx-decode.c: Regenerated.
  22
  23 2009-10-03  Paul Reed  <paulreed@paddedcell.com>
  24
  25         * arm-dis.c (print_insn): Check symtab_size not *symtab.
  26
  27 2009-10-02  H.J. Lu  <hongjiu.lu@intel.com>
  28
  29         * i386-opc.tbl: Drop Disp64 on jump and loop instructions.
  30         * i386-tbl.h: Regenerated.
  31
  32 2009-10-02  Peter Bergner  <bergner@vnet.ibm.com>
  33
  34         * ppc-dis.c (ppc_opts): Add "476" entry.
  35         * ppc-opc.c (PPC476): Define.
  36         (powerpc_opcodes): Update mnemonics where required for 476.
  37
  38 2009-10-01  Peter Bergner  <bergner@vnet.ibm.com>
  39
  40         * ppc-opc.c (PPCA2): Use renamed mask PPC_OPCODE_A2.
  41         * ppc-dis.c (ppc_opts): Likewise.
  42         Rename "ppca2" to "a2".
  43
  44 2009-10-01  M R Swami Reddy <MR.Swami.Reddy@nsc.com>
  45
  46         * crx-dis.c (match_opcode): Truncate mcode to 32-bit.
  47
  48 2009-09-29  DJ Delorie  <dj@redhat.com>
  49
  50         * Makefile.am: Add RX files.
  51         * configure.in: Add support for RX target.
  52         * disassemble.c: Likewise.
  53         * Makefile.in: Regenerate.
  54         * configure: Regenerate.
  55         * opc2c.c: New file.
  56         * rx-decode.c: New file.
  57         * rx-decode.opc: New file.
  58         * rx-dis.c: New file.
  59
  60 2009-09-29  Peter Bergner  <bergner@vnet.ibm.com>
  61
  62         * ppc-opc.c (powerpc_opcodes): Remove support for the the "lxsdux",
  63         "lxvd2ux", "lxvw4ux", "stxsdux", "stxvd2ux" and "stxvw4ux" opcodes.
  64
  65 2009-09-25  Michael Eager  <eager@eagercon.com>
  66
  67         * microblaze-dis.c (get_insn_microblaze, microblaze_get_target_address,
  68         microblaze_decode_insn): Add declarations.
  69         (get_delay_slots_microblaze): Remove.
  70
  71 2009-09-25  Martin Thuresson  <martint@google.com>
  72
  73         Update sources to make arc and arm targets compile cleanly with
  74         -Wc++-compat:
  75         * arc-dis.c Fix casts.
  76         * arc-ext.c: Add casts.
  77         * arm-dis.c (enum opcode_sentinel_enum): Gave name to anonymous
  78         enum.
  79
  80 2009-09-24  H.J. Lu  <hongjiu.lu@intel.com>
  81
  82         * i386-gen.c (opcode_modifiers): Remove Vex256.
  83         (set_bitfield): Handle XXX=V.
  84
  85         * i386-opc.h (Vex): Update comments.
  86         (Vex256): Removed.
  87         (VexNDS): Updated.
  88         (i386_opcode_modifier): Change vex to 2 bits.  Remove vex256.
  89
  90         * i386-opc.tbl: Replace "Vex|Vex256" with Vex=2.
  91         * i386-tbl.h: Regenerated.
  92
  93 2009-09-23  Nick Clifton  <nickc@redhat.com>
  94
  95         * po/fr.po: Updated French translation.
  96
  97 2009-09-21  Ben Elliston  <bje@au.ibm.com>
  98             Peter Bergner  <bergner@vnet.ibm.com>
  99
 100         * ppc-dis.c (ppc_opts): Add "ppca2" entry.
 101         * ppc-opc.c (powerpc_opcodes): Add eratilx, eratsx, eratsx.,
 102         eratre, wchkall, eratwe, ldawx., mdfcrx., mfdcr. mtdcrx., icswx,
 103         icswx., mtdcr., dci, wclrone, wclrall, wclr, erativax, tlbsrx.,
 104         ici mnemonics.
 105         (ERAT_T): New operand.
 106         (XWC_MASK): New mask.
 107         (XOPL2): New macro.
 108         (PPCA2): Define.
 109
 110 2009-09-18  Nick Clifton  <nickc@redhat.com>
 111
 112         * po/es.po: Updated Spanish translation.
 113         * po/vi.po: Updated Vietnamese translation.
 114
 115 2009-09-15  H.J. Lu  <hongjiu.lu@intel.com>
 116
 117         * i386-dis.c (OP_E_memory): Don't print '-' in Intel mode if
 118         disp == -disp.
 119
 120 2009-09-14  Nick Clifton  <nickc@redhat.com>
 121
 122         * po/nl.po: Updated Dutch translation.
 123
 124 2009-09-11  Nick Clifton  <nickc@redhat.com>
 125
 126         * po/opcodes.pot: Updated by the Translation project.
 127
 128 2009-09-11  Martin Thuresson  <martint@google.com>
 129
 130         Updated sources to compile cleanly with -Wc++-compat:
 131         * ld.h (enum endian_enum,enum symbolic_enum,enum dynamic_list_enum): Move to top level.
 132         * ldcref.c: Add casts.
 133         * ldctor.c: Add casts.
 134         * ldexp.c
 135         * ldexp.h (enum node_tree_enum,enum phase_enum): Move to top level.
 136         * ldlang.c: Add casts. (lang_insert_orphan): Use enum name instead of integer.
 137         * ldlang.h (enum statement_enum): Move to top level.
 138         * ldmain.c: Add casts.
 139         * ldwrite.c: Add casts.
 140         * lexsup.c: Add casts. (enum control_enum): Move to top level.
 141         * mri.c: Add casts. (mri_draw_tree): Use enum name instead of integer.
 142
 143 2009-09-10  Andreas Krebbel  <Andreas.Krebbel@de.ibm.com>
 144
 145         * s390-dis.c (print_insn_s390): Avoid 'long long'.
 146
 147 2009-09-10  Andreas Krebbel  <Andreas.Krebbel@de.ibm.com>
 148
 149         * s390-dis.c (s390_extract_operand): Remove the shift for pcrel operands.
 150         (print_insn_s390): Signextend and shift pcrel operands before printing.
 151
 152 2009-09-09  H.J. Lu  <hongjiu.lu@intel.com>
 153
 154         * i386-dis.c (vex_len_table): Change VEX_LEN_AE_R_X_M0 to
 155         VEX_LEN_AE_R_X_M_0 in comments.
 156
 157 2009-09-08  DJ Delorie  <dj@redhat.com>
 158
 159         * mep-opc.c: Regenerate.
 160
 161 2009-09-08  Andreas Schwab  <schwab@linux-m68k.org>
 162
 163         * z8kgen.c (struct op): Replace unused flavor with id.
 164         (opt): Remove extra xorb entry.
 165         (func): Use id field as fallback.
 166         (sub): Return new string, caller changed.
 167         (internal): Allocate end marker.  Assign unique id before sorting.
 168         (gas): Likewise.  Fix loop end condition.
 169         * z8k-opc.h: Regenerate.
 170
 171 2009-09-08  Alan Modra  <amodra@bigpond.net.au>
 172
 173         * ppc-opc.c (powerpc_macros <extrdi>): Allow n+b of 64.
 174
 175 2009-09-07  Alan Modra  <amodra@bigpond.net.au>
 176
 177         * z8kgen.c (func): Fix thinko last patch.
 178
 179 2009-09-07  Alan Modra  <amodra@bigpond.net.au>
 180
 181         * z8kgen.c (func): Stabilize qsort of identically named entries.
 182         * z8k-opc.h: Regenerate.
 183
 184 2009-09-07  Tristan Gingold  <gingold@adacore.com>
 185
 186         * po/opcodes.pot: Regenerate.
 187
 188 2009-09-07  Alan Modra  <amodra@bigpond.net.au>
 189
 190         * configure.in (BUILD_LIBS, BUILD_LIB_DEPS): Define and subst.
 191         * configure: Regenerate.
 192         * Makefile.am (LIBIBERTY, BUILD_LIBIBERTY, BUILD_LIBINTL): Delete.
 193         (BUILD_LIBS, BUILD_LIB_DEPS): Define.  Use..
 194         (i386-gen, ia64-gen, z8kgen): ..here.
 195         * Makefile.in: Regenerate.
 196
 197 2009-09-07  Tristan Gingold  <gingold@adacore.com>
 198
 199         * z8k-opc.h: Regenerate.
 200
 201 2009-09-05  Martin Thuresson  <martin@mtme.org>
 202
 203         * ia64-dis.c (print_insn_ia64): Update code to use renamed member.
 204         * m88k-dis.c (m88kdis): Rename variable class to in_class.
 205         * tic80-opc.c (tic80_symbol_to_value, tic80_value_to_symbol):
 206         Rename argument class to symbol_class.
 207
 208 2009-09-04  Jie Zhang  <jie.zhang@analog.com>
 209
 210         * bfin-dis.c (decode_pseudodbg_assert_0): Change according
 211         to the new encoding of DBGA, DBGAH, and DBGAL.
 212         (_print_insn_bfin): Likewise.
 213
 214 2009-09-03  Jie Zhang  <jie.zhang@analog.com>
 215
 216         * bfin-dis.c (_print_insn_bfin): Don't declare.
 217         (print_insn_bfin): Don't declare.
 218         (dregs_pair): Remove.
 219         (ignore_bits): Remove.
 220         (ccstat): Remove.
 221
 222 2009-09-03  Jie Zhang  <jie.zhang@analog.com>
 223
 224         * bfin-dis.c (IS_DREG): Define.
 225         (IS_PREG): Define.
 226         (IS_AREG): Define.
 227         (IS_GENREG): Define.
 228         (IS_DAGREG): Define.
 229         (IS_SYSREG): Define.
 230         (decode_REGMV_0): Check illegal register move instructions.
 231
 232 2009-09-03  Dave Korn  <dave.korn.cygwin@gmail.com>
 233
 234         * Makefile.am (BUILD_LIBINTL): New variable.
 235         (i386-gen$(EXEEXT_FOR_BUILD)): Use it.
 236         (ia64-gen$(EXEEXT_FOR_BUILD)): And here.
 237         (z8kgen$(EXEEXT_FOR_BUILD)): And here.
 238         * Makefile.in: Regenerate.
 239
 240 2009-09-01  DJ Delorie  <dj@redhat.com>
 241
 242         * mep-asm.c: Regenerate.
 243         * mep-desc.c: Regenerate.
 244         * mep-opc.c: Regenerate.
 245
 246 2009-09-01  Tristan Gingold  <gingold@adacore.com>
 247
 248         * makefile.vms: Ported to Itanium VMS.  Remove useless targets and
 249         dependencies.  Remove unused FORMAT variable.
 250         * configure.com: New file to create build.com DCL script for
 251         Itanium VMS or Alpha VMS.
 252
 253 2009-08-29  Martin Thuresson  <martin@mtme.org>
 254
 255         * cris-dis.c (bytes_to_skip): Update code to use new name.
 256         * i386-dis.c (putop): Update code to use new name.
 257         * i386-gen.c (process_i386_opcodes): Update code to use
 258         new name.
 259         * i386-opc.h (struct template): Rename struct template to
 260         insn_template. Update code accordingly.
 261         * i386-tbl.h (i386_optab): Update type to use new name.
 262         * ia64-dis.c (print_insn_ia64): Rename variable template
 263         to template_val.
 264         * tic30-dis.c (struct instruction, get_tic30_instruction):
 265         Update code to use new name.
 266         * tic54x-dis.c (has_lkaddr, get_insn_size)
 267         (print_parallel_instruction, print_insn_tic54x, tic54x_get_insn):
 268         Update code to use new name.
 269         * tic54x-opc.c (tic54x_unknown_opcode, tic54x_optab):
 270         Update type to new name.
 271         * z8kgen.c (internal, gas): Rename variable new to new_op.
 272
 273 2009-08-28  H.J. Lu  <hongjiu.lu@intel.com>
 274
 275         * Makefile.am (COMPILE_FOR_BUILD): Remove BUILD_CPPFLAGS.
 276         Replace BUILD_CFLAGS with CFLAGS_FOR_BUILD.
 277         (LINK_FOR_BUILD): Replace BUILD_CFLAGS/BUILD_LDFLAGS with
 278         CFLAGS_FOR_BUILD/LDFLAGS_FOR_BUILD.
 279         * Makefile.in: Regenerated.
 280
 281 2009-08-27  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
 282
 283         * Makefile.am (bfdlibdir, bfdincludedir): Move definition ...
 284         [INSTALL_LIBBFD]: ... here, ...
 285         [INSTALL_LIBBFD]: ... and empty overrides here.
 286         [!INSTALL_LIBBFD]: (rpath_bfdlibdir): New variable.
 287         [!INSTALL_LIBBFD] (libbfd_la_LDFLAGS): Use it.
 288         * Makefile.in: Regenerate.
 289         * configure: Regenerate.
 290
 291 2009-08-26  Philippe De Muyter  <phdm@macqel.be>
 292
 293         * m68k-dis.c (print_insn_arg): Add movecr register names for
 294         coldfire v4e families.
 295
 296 2009-08-25  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
 297
 298         * Makefile.am (SUBDIRS): Build '.' before 'po'.
 299         (COMPILE_FOR_BUILD, LINK_FOR_BUILD, BUILD_LIBIBERTY)
 300         (MOSTLYCLEANFILES, MAINTAINERCLEANFILES): New variables.
 301         (i386-gen$(EXEEXT_FOR_BUILD)): Renamed from i386-gen, rewrite
 302         using *BUILD variables, depend upon $(BUILD_LIBIBERTY).
 303         (i386-gen.o): New rule.
 304         ($(srcdir)/i386-init.h): Adjust.
 305         (i386-opc.lo): Depend on $(srcdir)/i386-tbl.h.
 306         (ia64-gen$(EXEEXT_FOR_BUILD)): Rename from ia64-gen, adjust likewise.
 307         (ia64-gen.o): New rule.
 308         (ia64_asmtab_deps): New variable.
 309         ($(srcdir)/ia64-asmtab.c): Use it; adjust likewise.
 310         (ia64-opc.lo): Depend on $(srcdir)/ia64-asmtab.c.
 311         (s390-mkopc$(EXEEXT_FOR_BUILD)): Rename from s390-mkopc, adjust
 312         likewise.
 313         (s390-opc.tab): Adjust.
 314         (z8kgen$(EXEEXT_FOR_BUILD), z8kgen.o, $(srcdir)/z8k-opc.h): New
 315         rules.
 316         (z8k-dis.lo): Depend on $(srcdir)/z8k-opc.h.
 317         * Makefile.in: Regenerate.
 318         * z8kgen.c (gas): Avoid '/*' in comment.
 319         * z8k-opc.h (func): Regenerate.
 320
 321 2009-08-24  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
 322
 323         * Makefile.am (TARGET_LIBOPCODES_CFILES): New variable, taken
 324         from $(CFILES), sorted, with dis-buf.c, dis-init.c, disassemble.c,
 325         i386-gen.c, ia64-opc-a.c, ia64-opc-b.c, ia64-opc-f.c, ia64-opc-i.c,
 326         ia64-opc-m.c, ia64-opc-d.c, ia64-gen.c, ia64-asmtab.c removed, and
 327         msp430-dis.c added.
 328         (LIBOPCODES_CFILES): New variable, adding to
 329         TARGET_LIBOPCODES_CFILES also non-target library sources.
 330         (CFILES): Factorize based on $(LIBOPCODES_CFILES), adding generator
 331         files.
 332         (ALL_MACHINES): Factorize based on $(TARGET_LIBOPCODES_CFILES).
 333         (EXTRA_libopcodes_la_SOURCES): Use $(LIBOPCODES_CFILES).
 334         * Makefile.in: Regenerate.
 335         * po/POTFILES.in: Regenerate.
 336
 337 2009-08-22  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
 338
 339         * Makefile.am (libopcodes_la_LDFLAGS): Initialize early.
 340         [INSTALL_LIBBFD] (bfdlib_LTLIBRARIES): Set only in this condition.
 341         [INSTALL_LIBBFD] (bfdinclude_DATA): New.
 342         [!INSTALL_LIBBFD] (noinst_LTLIBRARIES): New.
 343         [!INSTALL_LIBBFD] (libopcodes_la_LDFLAGS): Ensure libopcodes.la
 344         is built shared even if it is not to be installed.
 345         (install-bfdlibLTLIBRARIES,uninstall-bfdlibLTLIBRARIES)
 346         (install_libopcodes, uninstall_libopcodes): Remove.
 347         (AM_CPPFLAGS): Renamed from ...
 348         (INCLUDES): ... this.
 349         * Makefile.in: Regenerate.
 350
 351         * Makefile.am (AUTOMAKE_OPTIONS): Remove 1.9 and cygnus, add
 352         1.11, foreign, no-dist.
 353         (MKDEP, m32c_opc_h): Remove variables.
 354         (disassemble.lo): Rewrite using automake-style dependency
 355         tracking rules; only list the dependency upon the primary source
 356         file, but no included headers.
 357         (m32c-asm.lo, m32c-desc.lo, m32c-dis.lo, m32c-ibld.lo, m32c-opc.lo)
 358         (i386-gen.o, ia64-gen.o): Remove dependency statements.
 359         (EXTRA_libopcodes_la_SOURCES): New variable, list $(CFILES) to
 360         ensure all dependency fragments are included in the Makefile.
 361         (s390-opc.lo): Depend on s390-opc.tab.
 362         (DEP, DEP1, dep.sed, dep, dep-in, dep-am): Remove rules.
 363         (mkdep section): Remove.
 364         * Makefile.in: Regenerate.
 365         * po/POTFILES.in: Regenerate.
 366
 367         * Makefile.am (install-pdf, install-html): Remove.
 368         * Makefile.in: Regenerate.
 369
 370         * Makefile.in: Regenerate.
 371         * aclocal.m4: Likewise.
 372         * config.in: Likewise.
 373         * configure: Likewise.
 374
 375 2009-08-06  Michael Eager <eager@eagercon.com>
 376
 377         * Makefile.am: Add microblaze-opc.h to HFILES, microblaze-dis.c to
 378         CFILES, microblaze-dis.lo to ALL_MACHINES, targets.
 379         * Makefile.in: Regenerate.
 380         * configure.in: Add bfd_microblaze_arch target.
 381         * configure: Regenerate.
 382         * disassemble.c: Define ARCH_microblaze, return
 383         print_insn_microblaze().
 384         * microblaze-dis.c: New MicroBlaze disassembler.
 385         * microblaze-opc.h: New MicroBlaze opcode definitions.
 386         * microblaze-opcm.h: New MicroBlaze opcode types.
 387
 388 2009-07-25  H.J. Lu  <hongjiu.lu@intel.com>
 389
 390         * configure.in: Handle bfd_l1om_arch.
 391         * disassemble.c (disassembler): Likewise.
 392
 393         * configure: Regenerated.
 394
 395         * i386-dis.c (print_insn): Handle bfd_mach_l1om and
 396         bfd_mach_l1om_intel_syntax.  Use 8 bytes per line for Intel L1OM.
 397
 398         * i386-gen.c (cpu_flag_init): Set CPU_UNKNOWN_FLAGS to ~CpuL1OM.
 399         Add CPU_L1OM_FLAGS.
 400         (cpu_flags): Add CpuL1OM.
 401         (set_bitfield): Take an argument to set the value field.
 402         (process_i386_cpu_flag): Support ~CpuXXX and ~(CpuXXX|CpuYYY).
 403         (process_i386_opcode_modifier): Updated.
 404         (process_i386_operand_type): Likewise.
 405         * i386-init.h: Regenerated.
 406         * i386-tbl.h: Likewise.
 407
 408         * i386-opc.h (CpuL1OM): New.
 409         (CpuXsave): Updated.
 410         (i386_cpu_flags): Add cpul1om.
 411
 412 2009-07-24  Jan Beulich  <jbeulich@novell.com>
 413
 414         * i386-dis.c (fgrps): Correct annotation for feni/fdisi. Add
 415         frstpm.
 416         * i386-gen.c (cpu_flag_init): Add FP enabling flags where needed.
 417         (cpu_flags): Add Cpu8087, Cpu287, Cpu387, Cpu687, and CpuFISTTP.
 418         (set_bitfield): Expand CpuFP to Cpu8087|Cpu287|Cpu387.
 419         * i386-opc.h (Cpu8087, Cpu287, Cpu387, Cpu687, CpuFISTTP):
 420         Define.
 421         (union i386_cpu_flags): Add cpu8087, cpu287, cpu387, cpu687,
 422         and cpufisttp.
 423         * i386-opc.tbl: Qualify floating point instructions by their
 424         respective CpuXXX flag. Fix fucom{,p,pp}, fprem1, fsin, fcos,
 425         and fsincos to be avilable only on 387. Fix fstsw ax to be
 426         available only on 287+. Add f{,n}eni, f{,n}disi, f{,n}setpm,
 427         and frstpm.
 428         * i386-init.h, i386-tbl.h: Regenerate.
 429
 430 2009-07-20  Nick Clifton  <nickc@redhat.com>
 431
 432         PR 10288
 433         * arm-dis.c (arm_opcodes): Catch non-zero bits 8-11 in register
 434         offset or indexed based addressing mode 3.
 435
 436 2009-07-14  Nick Clifton  <nickc@redhat.com>
 437
 438         PR 10288
 439         * arm-dis.c (arm_opcodes): Catch illegal Addressing Mode 1
 440         patterns.
 441         (arm_decode_shift): Catch illegal register based shifts.
 442         (print_insn_arm): Properly handle negative register r0
 443         post-indexed addressing.
 444
 445 2009-07-10  Doug Kwan  <dougkwan@google.com>
 446
 447         * arm-disc.c (print_insn_coprocessor, print_insn_arm):  Print only
 448         lower 32 bits of long types to make hexadecimal output consistent
 449         on both 32-bit and 64-bit hosts.
 450
 451 2009-07-10  Alan Modra  <amodra@bigpond.net.au>
 452
 453         * fr30-desc.c, * fr30-desc.h, * fr30-opc.c, * fr30-opc.h,
 454         * frv-desc.c, * frv-desc.h, * frv-opc.c, * frv-opc.h,
 455         * ip2k-desc.c, * ip2k-desc.h, * ip2k-opc.c, * ip2k-opc.h,
 456         * iq2000-desc.c, * iq2000-desc.h, * iq2000-opc.c, * iq2000-opc.h,
 457         * lm32-desc.c, * lm32-desc.h, * lm32-opc.c, * lm32-opc.h,
 458         * lm32-opinst.c, * m32c-desc.c, * m32c-desc.h, * m32c-opc.c,
 459         * m32c-opc.h, * m32r-desc.c, * m32r-desc.h, * m32r-opc.c,
 460         * m32r-opc.h, * m32r-opinst.c, * mt-desc.c, * mt-desc.h,
 461         * mt-opc.c, * mt-opc.h, * openrisc-desc.c, * openrisc-desc.h,
 462         * openrisc-opc.c, * openrisc-opc.h, * xc16x-desc.c, * xc16x-desc.h,
 463         * xc16x-opc.c, * xc16x-opc.h, * xstormy16-desc.c, * xstormy16-desc.h,
 464         * xstormy16-opc.c, * xstormy16-opc.h: Regenerate.
 465
 466 2009-07-07  Chung-Lin Tang  <cltang@pllab.cs.nthu.edu.tw>
 467
 468         * arm-dis.c (coprocessor_opcodes): Fix mask for waddbhus.
 469
 470 2009-07-07  Nick Clifton  <nickc@redhat.com>
 471
 472         PR 10288
 473         * arm-dis.c (arm_opcodes): Be more strict about decoding scaled
 474         addressing modes.
 475
 476 2009-07-06  DJ Delorie  <dj@redhat.com>
 477
 478         * mep-desc.c: Regenerate.
 479         * mep-desc.h: Regenerate.
 480         * mep-opc.c: Regenerate.
 481         * mep-opc.h: Regenerate.
 482
 483 2009-07-06  Dwarakanath Rajagopal  <dwarak.rajagopal@amd.com>
 484
 485         * i386-opc.h (CpuFMA4): Add CpuFMA4.
 486         (i386_cpu_flags): New.
 487         * i386-gen.c: Add CPU_FMA4_FLAGS.
 488         * i386-opc.tbl: Add FMA4 instructions.
 489         * i386-tbl.h: Regenerate.
 490         * i386-init.h: Regenerate.
 491         * i386-dis.c (OP_VEX_FMA): New. Handle FMA4.
 492         (OP_XMM_VexW): Ditto.
 493         (OP_EX_VexW): Ditto.
 494         (VEXI4_Fixup): Ditto.
 495         (VexI4, VexFMA, Vex128FMA, EXVexW, EXdVexW, XMVexW): New Macros.
 496         (PREFIX_VEX_3A5C, PREFIX_VEX_3A5D, PREFIX_VEX_3A5E): New.
 497         (PREFIX_VEX_3A5F, PREFIX_VEX_3A60): New.
 498         (PREFIX_VEX_3A68, PREFIX_VEX_3A69, PREFIX_VEX_3A6A): New.
 499         (PREFIX_VEX_3A6B, PREFIX_VEX_3A6C, PREFIX_VEX_3A6D): New.
 500         (PREFIX_VEX_3A6E, PREFIX_VEX_3A6F, PREFIX_VEX_3A7A): New.
 501         (PREFIX_VEX_3A7B, PREFIX_VEX_3A7C, PREFIX_VEX_3A7D): New.
 502         (PREFIX_VEX_3A7E, PREFIX_VEX_3A7F): New.
 503         (VEX_LEN_3A6A_P_2,VEX_LEN_3A6B_P_2, VEX_LEN_3A6E_P_2): New.
 504         (VEX_LEN_3A6F_P_2,VEX_LEN_3A7A_P_2, VEX_LEN_3A7B_P_2): New.
 505         (VEX_LEN_3A7E_P_2,VEX_LEN_3A7F_P_2): New.
 506         (get_vex_imm8): New. handle FMA4.
 507         (OP_EX_VexReg): Ditto.
 508
 509 2009-06-30  Nick Clifton  <nickc@redhat.com>
 510
 511         PR 10288
 512         * arm-dis.c (coprocessor): Print the LDC and STC versions of the
 513         LFM and SFM instructions as comments,.
 514         Improve consistency of formatting for instructions displayed as
 515         comments and decimal values displayed with their hexadecimal
 516         equivalents.
 517         Formatting tidy ups.
 518
 519 2009-06-29  Nick Clifton  <nickc@redhat.com>
 520
 521         PR 10288
 522         * arm-dis.c (enum opcode_sentinels): New:  Used to mark the
 523         boundary between variaant and generic coprocessor instuctions.
 524         (coprocessor): Use it.
 525         Fix architecture version of MCRR and MRRC instructions.
 526         (arm_opcdes): Fix patterns for STRB and STRH instructions.
 527         (print_insn_coprocessor): Check architecture and extension masks.
 528         Print a hexadecimal version of any decimal constant that is
 529         outside of the range of -16 to +32.
 530         (print_arm_address): Add a return value of the offset used in the
 531         adress, if it is worth printing a hexadecimal version of it.
 532         (print_insn_neon): Print a hexadecimal version of any decimal
 533         constant that is outside of the range of -16 to +32.
 534         (print_insn_arm): Likewise.
 535         (print_insn_thumb16): Likewise.
 536         (print_insn_thumb32): Likewise.
 537
 538         PR 10297
 539         * arm-dis.c (UNDEFINED_INSTRUCTION): New macro for a description
 540         of an undefined instruction.
 541         (arm_opcodes): Use it.
 542         (thumb_opcod): Use it.
 543         (thumb32_opc): Use it.
 544
 545 2009-06-23  DJ Delorie  <dj@redhat.com>
 546
 547         * mep-desc.c: Regenerate.
 548         * mep-desc.h: Regenerate.
 549         * mep-dis.c: Regenerate.
 550         * mep-ibld.c: Regenerate.
 551         * mep-opc.c: Regenerate.
 552
 553         * mep-asm.c: Regenerate.
 554         * mep-opc.c: Regenerate.
 555         * mep-opc.h: Regenerate.
 556
 557 2009-06-22  Nick Clifton  <nickc@redhat.com>
 558
 559         * po/fi.po: Updated Finish translation.
 560
 561 2009-06-22  Alan Modra  <amodra@bigpond.net.au>
 562
 563         * m32c-asm.c: Regenerate.
 564
 565 2009-06-22  Alan Modra  <amodra@bigpond.net.au>
 566
 567         * score-dis.c (print_insn_score48, print_insn_score32): Move default
 568         case label to proper lexical block.
 569         * score7-dis.c (print_insn_score32): Likewise.
 570
 571 2009-06-19  Martin Schwidefsky  <sschwidefsky@de.ibm.com>
 572
 573         * s390-opc.c (INSTR_RR_0R_OPT, INSTR_RX_0RRD_OPT, MASK_RR_0R_OPT,
 574         MASK_RX_0RRD_OPT): New instruction formats with optional arguments.
 575         * s390-opc.txt (nopr, nop): Use new instruction format.
 576
 577 2009-06-18  Nick Clifton  <nickc@redhat.com>
 578
 579         PR 10288
 580         * arm-dis.c (print_insn_coprocessor): Check that a user specified
 581         ARM architecture supports the matched instruction.
 582         (print_insn_arm): Likewise.
 583         (select_arm_features): New function.  Fills in the fields of an
 584         arm_feature_set structure based on a given arm machine number.
 585         (print_insn): Initialise an arm_feature_set structure.
 586
 587 2009-06-16  Maciej W. Rozycki  <macro@linux-mips.org>
 588
 589         * vax-dis.c (is_function_entry): Return success for synthetic
 590         symbols too.
 591         (is_plt_tail): New function.
 592         (print_insn_vax): Decode PLT entry offset longword.
 593
 594 2009-06-15  Nick Clifton  <nickc@redhat.com>
 595
 596         PR 10186
 597         * arm-dis.c (thumb32_opcodes): Fix binary value of SEV.W
 598         instruction.
 599
 600         PR 10173
 601         * cr16-dis.c (print_arg): Avoid printing the 0x prefix twice.
 602
 603 2009-06-15  Nick Clifton  <nickc@redhat.com>
 604
 605         PR 10263
 606         * arm-dis.c (print_insn): Ignore is_data if the user has requested
 607         the disassembly of data as well as instructions.
 608
 609 2009-06-11  Doug Evans  <dje@sebabeach.org>
 610
 611         * cgen.sh: Handle multiple simultaneous runs for parallel makes.
 612
 613 2009-06-11  Anthony Green  <green@moxielogic.com>
 614
 615         * moxie-opc.c (moxie_form1_opc_info): Remove branch instructions.
 616         (moxie_form3_opc_info): Add branch instructions.
 617         * moxie-dis.c (print_insn_moxie): Disassemble MOXIE_F3_PCREL
 618         encoded instructions.
 619
 620 2009-06-06  Anthony Green  <green@moxielogic.com>
 621
 622         * moxie-opc.c: Recode some MOXIE_F1_4 opcodes as MOXIE_F1_M.
 623         * moxie-dis.c (print_insn_moxie): Handle MOXIE_F1_M case.
 624
 625 2009-06-04  Alan Modra  <amodra@bigpond.net.au>
 626
 627         * dep-in.sed: Don't use \n in replacement part of s command.
 628         * Makefile.am (DEP1): LC_ALL for uniq.
 629         * Makefile.in: Regenerate.
 630
 631 2009-06-02  Nick Clifton  <nickc@redhat.com>
 632
 633         * po/nl.po: Updated Dutch translation.
 634
 635 2009-06-02  Tristan Gingold  <gingold@adacore.com>
 636
 637         * ia64-gen.c (parse_resource_users, print_dependency_table,
 638         add_dis_table_ent, finish_distable, insert_bit_table_ent,
 639         add_dis_entry, compact_distree, gen_dis_table, completer_entries_eq,
 640         get_prefix_len, compute_completer_bits, insert_opcode_dependencies,
 641         insert_completer_entry, print_completer_entry, print_completer_table,
 642         opcodes_eq, add_opcode_entry, shrink): Use ISO C syntax for functions.
 643
 644 2009-05-28  DJ Delorie  <dj@redhat.com>
 645
 646         * mep-asm.c: Regenerate.
 647         * mep-desc.c: Regenerate.
 648
 649 2009-05-26  DJ Delorie  <dj@redhat.com>
 650
 651         * mep-asm.c: Regenerate.
 652         * mep-desc.c: Regenerate.
 653         * mep-desc.h: Regenerate.
 654         * mep-dis.c: Regenerate.
 655         * mep-ibld.c: Regenerate.
 656         * mep-opc.c: Regenerate.
 657         * mep-opc.h: Regenerate.
 658
 659 2009-05-26  Nick Clifton  <nickc@redhat.com>
 660
 661         * po/id.po: Updated Indonesian translation.
 662         * po/opcodes.pot: Updated template file.
 663
 664 2009-05-26  Alan Modra  <amodra@bigpond.net.au>
 665
 666         * dep-in.sed: Don't modify .o to .lo here.  Output one filename
 667         per line with all lines having continuation backslash.  Prefix
 668         first line with "A", following lines with "B".
 669         * Makefile.am (DEP): Don't use dep.sed here.
 670         (DEP1): Run $MKDEP on single files, modify .o to .lo here.  Use
 671         dep.sed here on dependencies, sort and uniq.
 672         * Makefile.in: Regenerate.
 673
 674 2009-05-25  Tristan Gingold  <gingold@adacore.com>
 675
 676         * makefile.vms (OPT): New variable.
 677         (CFLAGS): Update compilation flags.
 678
 679 2009-05-22  DJ Delorie  <dj@redhat.com>
 680
 681         * mep-asm.c: Regenerate.
 682         * mep-desc.c: Regenerate.
 683         * mep-desc.h: Regenerate.
 684         * mep-dis.c: Regenerate.
 685         * mep-ibld.c: Regenerate.
 686         * mep-opc.c: Regenerate.
 687         * mep-opc.h: Regenerate.
 688
 689 2009-05-22  Dwarakanath Rajagopal  <dwarak.rajagopal@amd.com>
 690
 691         * i386-opc.h (Cpusse5): Delete.
 692         (i386_cpu_flags): Delete.
 693         * i386-gen.c: Remove CpuSSE5, Drex, Drexv and Drexc.
 694         * i386-opc.tbl: Remove SSE5 instructions.
 695         * i386-tbl.h: Regenerate.
 696         * i386-init.h: Regenerate.
 697         * i386-dis.c (OP_E_memeory, OP_E_extended): Remove drex handling.
 698         (print_drex_arg): Delete.
 699         (OP_DREX4): Delete.
 700         (OP_DREX3): Delete.
 701         (OP_DREX_ICMP): Delete.
 702         (OP_DREX_FCMP): Delete.
 703         (DREX_*): Delete.
 704         (THREE_BYTE_0F24, THREE_BYTE_0F25, THREE_BYTE_0f7B): Delete.
 705
 706 2009-05-22  Alan Modra  <amodra@bigpond.net.au>
 707
 708         * Makefile.am: Run "make dep-am".
 709         * Makefile.in: Regenerate.
 710         * po/POTFILES.in: Regenerate.
 711
 712 2009-05-19  DJ Delorie  <dj@redhat.com>
 713
 714         * mep-asm.c: Regenerate.
 715         * mep-opc.c: Regenerate.
 716
 717 2009-04-30  DJ Delorie  <dj@redhat.com>
 718
 719         * mep-asm.c: Regenerate.
 720         * mep-desc.c: Regenerate.
 721         * mep-desc.h: Regenerate.
 722         * mep-dis.c: Regenerate.
 723         * mep-ibld.c: Regenerate.
 724         * mep-opc.c: Regenerate.
 725         * mep-opc.h: Regenerate.
 726
 727 2009-04-17  DJ Delorie  <dj@redhat.com
 728
 729         * mep-desc.c: Regenerate.
 730         * mep-ibld.c: Regenerate.
 731         * mep-opc.c: Regenerate.
 732         * mep-opc.h: Regenerate.
 733
 734 2009-04-15  Anthony Green  <green@moxielogic.com>
 735
 736         * moxie-opc.c, moxie-dis.c: Created.
 737         * Makefile.am: Build the moxie source files.
 738         * configure.in: Add moxie support.
 739         * Makefile.in, configure: Rebuilt.
 740         * disassemble.c (disassembler): Add moxie support.
 741         (ARCH_moxie): Define.
 742
 743 2009-04-15  Jan Beulich  <jbeulich@novell.com>
 744
 745         * i386-opc.tbl (protb, protw, protd, protq): Set opcode
 746         extension to None.
 747         (pshab, pshaw, pshad, pshaq): Likewise.
 748         * i386-tbl.h: Re-generate.
 749
 750 2009-04-08  DJ Delorie  <dj@redhat.com
 751
 752         * mep-asm.c: Regenerate.
 753         * mep-desc.c: Regenerate.
 754         * mep-desc.h: Regenerate.
 755         * mep-dis.c: Regenerate.
 756         * mep-ibld.c: Regenerate.
 757         * mep-opc.c: Regenerate.
 758         * mep-opc.h: Regenerate.
 759
 760 2009-04-07  Peter Bergner  <bergner@vnet.ibm.com>
 761
 762         * ppc-opc.c (powerpc_opcodes) <"tlbilxlpid", "tlbilxpid", "tlbilxva",
 763         "tlbilx">: Use secondary opcode "18" as per the ISA 2.06 documentation.
 764         Reorder entries so the extended mnemonics are listed before tlbilx.
 765
 766 2009-04-02  Peter Bergner  <bergner@vnet.ibm.com>
 767
 768         * ppc-dis.c (powerpc_init_dialect): Do not choose a default dialect
 769         due to -many/-Many.
 770         (print_insn_powerpc): Make sure we only deprecate instructions using
 771         the original dialect and not a modified dialect due to -Many handling.
 772         Move the handling of the condition register and default operands to
 773         the end of the if/else if/else chain.
 774         * ppc-opc.c (powerpc_opcodes): Reorder the opcode table so that
 775         instructions from newer processors are listed before older ones.
 776         <"icblce", "sync", "eieio", "tlbld">: Deprecate for processors
 777         that have instructions with conflicting opcodes.
 778
 779 2009-04-01  Peter Bergner  <bergner@vnet.ibm.com>
 780
 781         * ppc-opc.c (powerpc_opcodes) <"dcbzl">: Merge the POWER4 and
 782         E500MC entries.
 783
 784 2009-04-01  Christophe Lyon  <christophe.lyon@st.com>
 785
 786         * arm-dis.c (print_insn): Print BE8 opcodes in little endianness.
 787
 788 2009-03-30  Joseph Myers  <joseph@codesourcery.com>
 789
 790         * arm-dis.c (print_insn): Also check section matches in backwards
 791         search for mapping symbol.
 792
 793 2009-03-26  H.J. Lu  <hongjiu.lu@intel.com>
 794
 795         * i386-dis.c (get_valid_dis386): Abort on unhandled table.
 796
 797 2009-03-18  Alan Modra  <amodra@bigpond.net.au>
 798
 799         * cgen-opc.c: Include alloca-conf.h rather than alloca.h.
 800         * Makefile.am: Run "make dep-am".
 801         * Makefile.in: Regenerate.
 802         * openrisc-opc.c: Regenerate.
 803
 804 2009-03-10  Nick Clifton  <nickc@redhat.com>
 805
 806         * po/id.po: Updated Indonesian translation.
 807
 808 2009-03-10  Alan Modra  <amodra@bigpond.net.au>
 809
 810         * ppc-dis.c: Include "opintl.h".
 811         (struct ppc_mopt, ppc_opts): New.
 812         (ppc_parse_cpu): New function.
 813         (powerpc_init_dialect): Use it.
 814         (print_ppc_disassembler_options): Dump options from ppc_opts.
 815         Internationalize message.
 816
 817 2009-03-06  Nick Clifton  <nickc@redhat.com>
 818
 819         * po/es.po: Updated Spanish translation.
 820
 821 2009-03-04  Alan Modra  <amodra@bigpond.net.au>
 822
 823         PR 6768
 824         * configure.in: Test for ld --as-needed support.  Link shared
 825         libopcodes against libm.
 826         * configure: Regenerate.
 827
 828 2009-03-03  Peter Bergner  <bergner@vnet.ibm.com>
 829
 830         * ppc-opc.c (powerpc_opcodes): Reorder the opcode table so that
 831         instructions from newer processors are listed before older ones.
 832
 833 2009-03-03  Alan Modra  <amodra@bigpond.net.au>
 834
 835         * Makefile.am: Run "make dep-am".
 836         (HFILES): Move lm32-desc.h and lm32-opc.h from..
 837         (CFILES): ..here.
 838         * Makefile.in: Regenerate.
 839
 840 2009-03-02  Qinwei  <qinwei@sunnorth.com.cn>
 841
 842         * score7-dis.c: New file.
 843         * Makefile.am: Add dependencies for score7-dis.c.
 844         * Makefile.in: Regenerate.
 845         * configure.in: Add score7-dis to score files.
 846         * configure: Regenerate.
 847         * score-dis.c: Add support for score7 architecture.
 848         * score-opc.h: Likewise.
 849
 850 2009-03-01  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
 851
 852         * configure: Regenerate.
 853
 854 2009-02-27  H.J. Lu  <hongjiu.lu@intel.com>
 855
 856         * i386-dis.c (OP_EX): Call OP_E_memory instead of OP_E.
 857
 858 2009-02-26  Peter Bergner  <bergner@vnet.ibm.com>
 859
 860         * ppc-dis.c (powerpc_init_dialect): Extend -Mpower7 to disassemble
 861         the power7 and the isel instructions.
 862         * ppc-opc.c (insert_xc6, extract_xc6): New static functions.
 863         (insert_dm, extract_dm): Likewise.
 864         (XB6): Update comment to include XX2 form.
 865         (WC, XC6, SHW, DMEX, UIM, XX2, XX3RC, XX4, XX2_MASK, XX2UIM_MASK,
 866         XX2BF_MASK, XX3BF_MASK, XX3SHW_MASK, XX4_MASK, XWC_MASK, POWER7): New.
 867         (RemoveXX3DM): Delete.
 868         (powerpc_opcodes): <"lfdp", "lfdpx", "mcrxr", "mftb", "mffgpr",
 869         "mftgpr">: Deprecate for POWER7.
 870         <"fres", "fres.", "frsqrtes", "frsqrtes.", "fre", "fre.", "frsqrte",
 871         "frsqrte.">: Deprecate the three operand form and enable the two
 872         operand form for POWER7 and later.
 873         <"wait">: Extend to accept optional parameter.  Enable for POWER7.
 874         <"waitsrv", "waitimpl">: Add extended opcodes.
 875         <"ldbrx", "stdbrx">: Enable for POWER7.
 876         <"cdtbcd", "cbcdtd", "addg6s">: Add POWER6 opcodes.
 877         <"bpermd", "dcbtstt", "dcbtt", "dcffix.", "dcffix", "divde.", "divde",
 878         "divdeo.", "divdeo", "divdeu.", "divdeu", "divdeuo.", "divdeuo",
 879         "divwe.", "divwe", "divweo.", "divweo", "divweu.", "divweu", "divweuo.",
 880         "divweuo", "fcfids.", "fcfids", "fcfidu.", "fcfidu", "fcfidus.",
 881         "fcfidus", "fctidu.", "fctidu", "fctiduz.", "fctiduz", "fctiwu.",
 882         "fctiwu", "fctiwuz.", "fctiwuz", "ftdiv", "ftsqrt", "lbarx", "lfiwzx",
 883         "lharx", "popcntd", "popcntw", "stbcx.", "sthcx.">: Add POWER7 opcodes.
 884         <"lxsdux", "lxsdx", "lxvdsx", "lxvw4ux", "lxvw4x", "stxsdux", "stxsdx",
 885         "stxvw4ux", "stxvw4x", "xsabsdp", "xsadddp", "xscmpodp", "xscmpudp",
 886         "xscpsgndp", "xscvdpsp", "xscvdpsxds", "xscvdpsxws", "xscvdpuxds",
 887         "xscvdpuxws", "xscvspdp", "xscvsxddp", "xscvuxddp", "xsdivdp",
 888         "xsmaddadp", "xsmaddmdp", "xsmaxdp", "xsmindp", "xsmsubadp",
 889         "xsmsubmdp", "xsmuldp", "xsnabsdp", "xsnegdp", "xsnmaddadp",
 890         "xsnmaddmdp", "xsnmsubadp", "xsnmsubmdp", "xsrdpi", "xsrdpic",
 891         "xsrdpim", "xsrdpip", "xsrdpiz", "xsredp", "xsrsqrtedp", "xssqrtdp",
 892         "xssubdp", "xstdivdp", "xstsqrtdp", "xvabsdp", "xvabssp", "xvadddp",
 893         "xvaddsp", "xvcmpeqdp.", "xvcmpeqdp", "xvcmpeqsp.", "xvcmpeqsp",
 894         "xvcmpgedp.", "xvcmpgedp", "xvcmpgesp.", "xvcmpgesp", "xvcmpgtdp.",
 895         "xvcmpgtdp", "xvcmpgtsp.", "xvcmpgtsp", "xvcpsgnsp", "xvcvdpsp",
 896         "xvcvdpsxds", "xvcvdpsxws", "xvcvdpuxds", "xvcvdpuxws", "xvcvspdp",
 897         "xvcvspsxds", "xvcvspsxws", "xvcvspuxds", "xvcvspuxws", "xvcvsxddp",
 898         "xvcvsxdsp", "xvcvsxwdp", "xvcvsxwsp", "xvcvuxddp", "xvcvuxdsp",
 899         "xvcvuxwdp", "xvcvuxwsp", "xvdivdp", "xvdivsp", "xvmaddadp",
 900         "xvmaddasp", "xvmaddmdp", "xvmaddmsp", "xvmaxdp", "xvmaxsp",
 901         "xvmindp", "xvminsp", "xvmovsp", "xvmsubadp", "xvmsubasp", "xvmsubmdp",
 902         "xvmsubmsp", "xvmuldp", "xvmulsp", "xvnabsdp", "xvnabssp", "xvnegdp",
 903         "xvnegsp", "xvnmaddadp", "xvnmaddasp", "xvnmaddmdp", "xvnmaddmsp",
 904         "xvnmsubadp", "xvnmsubasp", "xvnmsubmdp", "xvnmsubmsp", "xvrdpi",
 905         "xvrdpic", "xvrdpim", "xvrdpip", "xvrdpiz", "xvredp", "xvresp",
 906         "xvrspi", "xvrspic", "xvrspim", "xvrspip", "xvrspiz", "xvrsqrtedp",
 907         "xvrsqrtesp", "xvsqrtdp", "xvsqrtsp", "xvsubdp", "xvsubsp", "xvtdivdp",
 908         "xvtdivsp", "xvtsqrtdp", "xvtsqrtsp", "xxland", "xxlandc", "xxlnor",
 909         "xxlor", "xxlxor", "xxmrghw", "xxmrglw", "xxsel", "xxsldwi", "xxspltd",
 910         "xxspltw", "xxswapd">: Add VSX opcodes.
 911
 912 2009-02-23  H.J. Lu  <hongjiu.lu@intel.com>
 913
 914         * i386-gen.c (operand_type_init): Remove OPERAND_TYPE_VEX_IMM4.
 915         (operand_types): Remove Vex_Imm4.
 916
 917         * i386-opc.h (Vex_Imm4): Removed.
 918         (OTMax): Updated.
 919         (i386_operand_type): Remove vex_imm4.
 920
 921         * i386-opc.tbl: Remove Vex_Imm4 comments.
 922         * i386-init.h: Regenerated.
 923         * i386-tbl.h: Likewise.
 924
 925 2009-02-23  Richard Earnshaw  <rearnsha@arm.com>
 926
 927         * arm-dis.c (neon_opcodes): Correct bit-mask and patterns for
 928         vq{r}shr{u}n.s64 insnstructions.
 929
 930 2009-02-19  Peter Bergner  <bergner@vnet.ibm.com>
 931
 932         * ppc-opc.c (powerpc_opcodes) <"lfdepx", "stfdepx">: Fix the first
 933         operand to be a float point register (FRT/FRS).
 934
 935 2009-02-18  Adam Nemet  <anemet@caviumnetworks.com>
 936
 937         * mips-opc.c (mips_builtin_opcodes): Move the Octeon-specific
 938         dmfc2 and dmtc2 before the architecture-level variants.
 939
 940 2009-02-18  Pierre Muller  <muller@ics.u-strasbg.fr>
 941
 942         * fr30-opc.c: Regenerate.
 943         * frv-opc.c: Regenerate.
 944         * ip2k-opc.c: Regenerate.
 945         * iq2000-opc.c: Regenerate.
 946         * lm32-opc.c: Regenerate.
 947         * m32c-opc.c: Regenerate.
 948         * m32r-opc.c: Regenerate.
 949         * mep-opc.c: Regenerate.
 950         * mt-opc.c: Regenerate.
 951         * xc16x-opc.c: Regenerate.
 952         * xstormy16-opc.c: Regenerate.
 953         * tic54x-dis.c (print_instruction): Avoid compiler warning on
 954         sprintf call.
 955
 956 2009-02-12  Nathan Sidwell  <nathan@codesourcery.com>
 957
 958         * m68k-opc.c (m68k_opcodes): Add stldsr instruction.
 959
 960 2009-02-05  Peter Bergner  <bergner@vnet.ibm.com>
 961
 962         * ppc-opc.c: Update copyright year.
 963         (powerpc_opcodes) <"dcbt", "dcbtst">: Deprecate the Embedded operand
 964         ordering for POWER4 and later and use the correct Server ordering.
 965
 966 2009-02-04  H.J. Lu  <hongjiu.lu@intel.com>
 967
 968         AVX Programming Reference (January, 2009)
 969         * i386-dis.c (PREFIX_VEX_3A44): New.
 970         (VEX_LEN_3A44_P_2): Likewise.
 971         (PREFIX_VEX_3A48): Updated.
 972         (VEX_LEN_3A4C_P_2): Likewise.
 973         (prefix_table): Add PREFIX_VEX_3A44.
 974         (vex_table): Likewise.
 975         (vex_len_table): Add VEX_LEN_3A44_P_2.
 976
 977         * i386-opc.tbl: Add PCLMUL + AVX instructions.
 978         * i386-tbl.h: Regenerated.
 979
 980 2009-02-03  Sandip Matte  <sandip@rmicorp.com>
 981
 982         * mips-dis.c (mips_cp0_names_xlr, mips_cp0sel_names_xlr): Define.
 983         (mips_arch_choices): Add XLR entry.
 984         * mips-opc.c (XLR): Define.
 985         (mips_builtin_opcodes): Add XLR instructions.
 986
 987 2009-02-03  Carlos O'Donell  <carlos@codesourcery.com>
 988
 989         * Makefile.am: Add install-pdf target.
 990         * po/Make-in: Add install-pdf target.
 991         * Makefile.in: Regenerate.
 992
 993 2009-02-02  DJ Delorie  <dj@redhat.com>
 994
 995         * mep-asm.c: Regenerate.
 996         * mep-desc.c: Regenerate.
 997         * mep-desc.h: Regenerate.
 998         * mep-dis.c: Regenerate.
 999         * mep-ibld.c: Regenerate.
1000         * mep-opc.c: Regenerate.
1001         * mep-opc.h: Regenerate.
1002
1003 2009-01-29  Mark Mitchell  <mark@codesourcery.com>
1004
1005         * arm-dis.c (thumb32_opcodes): Correct decoding for qadd, qdadd,
1006         qsub, and qdsub.
1007
1008 2009-01-28  Chao-ying Fu  <fu@mips.com>
1009
1010         * mips-opc.c (suxc1): Add the flag of FP_D.
1011
1012 2009-01-20  Alan Modra  <amodra@bigpond.net.au>
1013
1014         * fr30-asm.c, fr30-dis.c, fr30-ibld.c, frv-asm.c, frv-dis.c,
1015         * frv-ibld.c, ip2k-asm.c, ip2k-dis.c, ip2k-ibld.c,
1016         * iq2000-asm.c, iq2000-dis.c, iq2000-ibld.c, m32c-asm.c,
1017         * m32c-dis.c, m32c-ibld.c, m32r-asm.c, m32r-dis.c,
1018         * m32r-ibld.c, mep-asm.c, mep-dis.c, mep-ibld.c, mt-asm.c,
1019         * mt-dis.c, mt-ibld.c, openrisc-asm.c, openrisc-dis.c,
1020         * openrisc-ibld.c, xc16x-asm.c, xc16x-dis.c, xc16x-ibld.c,
1021         * xstormy16-asm.c, xstormy16-dis.c, xstormy16-ibld.c: Regenerate.
1022
1023 2009-01-16  Alan Modra  <amodra@bigpond.net.au>
1024
1025         * configure.in (commonbfdlib): Delete.
1026         (SHARED_LIBADD): Add pic libiberty if such is available.
1027         * configure: Regenerate.
1028         * po/POTFILES.in: Regenerate.
1029
1030 2009-01-14  Peter Bergner  <bergner@vnet.ibm.com>
1031
1032         * ppc-dis.c (print_insn_powerpc): Skip insn if it is deprecated.
1033         * ppc-opc.c (powerpc_opcodes) <mtfsf, mtfsf.>: Deprecate the two
1034         operand form and enable the four operand form for POWER6 and later.
1035         <mtfsfi, mtfsfi.>: Deprecate the two operand form and enable the
1036         three operand form for POWER6 and later.
1037
1038 2009-01-14  Mike Frysinger  <vapier@gentoo.org>
1039
1040         * bfin-dis.c (OUTS): Use "%s" as format string.
1041
1042 2009-01-13  H.J. Lu  <hongjiu.lu@intel.com>
1043
1044         * i386-gen.c (cpu_flag_init): Remove a white space.
1045         (operand_type_init): Likewise.
1046
1047 2009-01-12  H.J. Lu  <hongjiu.lu@intel.com>
1048
1049         * i386-opc.tbl: Add NoAVX to movnti, lfence and mfence.
1050         * i386-tbl.h: Regenerated.
1051
1052 2009-01-12  H.J. Lu  <hongjiu.lu@intel.com>
1053
1054         * i386-dis.c (dis386): Use EbS on addB, orB, adcB, sbbB, andB,
1055         subB, xorB and cmpB.  Use EvS on addS, orS, adcS, sbbS, andS,
1056         subS, xorS and cmpS.
1057
1058 2009-01-10  H.J. Lu  <hongjiu.lu@intel.com>
1059
1060         * i386-gen.c (cpu_flag_init): Replace CpuP4 and CpuK6 with
1061         CpuClflush and CpuSYSCALL, respectively. Remove CpuK8.  Add
1062         CPU_COREI7_FLAGS, CPU_CLFLUSH_FLAGS and CPU_SYSCALL_FLAGS.
1063         (cpu_flags): Remove CpuP4, CpuK6 and CpuK8.  Add CpuClflush
1064         and CpuSYSCALL.
1065         (lineno): Removed.
1066         (set_bitfield): Take an argument, lineno.  Don't report lineno
1067         on error if it is -1.
1068         (process_i386_cpu_flag): Take an argument, lineno.
1069         (process_i386_opcode_modifier): Likewise.
1070         (process_i386_operand_type): Likewise.
1071         (output_i386_opcode): Likewise.
1072         (opcode_hash_entry): Add lineno.
1073         (process_i386_opcodes): Updated.
1074         (process_i386_registers): Likewise.
1075         (process_i386_initializers): Likewise.
1076
1077         * i386-opc.h (CpuP4): Removed.
1078         (CpuK6): Likewise.
1079         (CpuK8): Likewise.
1080         (CpuClflush): New.
1081         (CpuSYSCALL): Likewise.
1082         (CpuMMX): Updated.
1083         (i386_cpu_flags): Remove cpup4, cpuk6 and cpuk8.  Add
1084         cpuclflush and cpusyscall.
1085
1086         * i386-opc.tbl: Update movnti, clflush, lfence, mfence, pause,
1087         syscall and sysret.
1088         * i386-init.h: Regenerated.
1089         * i386-tbl.h: Likewise.
1090
1091 2009-01-09  H.J. Lu  <hongjiu.lu@intel.com>
1092
1093         * i386-gen.c (cpu_flag_init): Add CpuRdtscp to CPU_K8_FLAGS
1094         and CPU_AMDFAM10_FLAGS.  Add CPU_RDTSCP_FLAGS.
1095         (cpu_flags): Add CpuRdtscp.
1096         (set_bitfield): Remove CpuSledgehammer check.
1097
1098         * i386-opc.h (CpuRdtscp): New.
1099         (CpuLM): Updated.
1100         (i386_cpu_flags): Add cpurdtscp.
1101
1102         * i386-opc.tbl: Replace CpuSledgehammer with CpuRdtscp.
1103         * i386-init.h: Regenerated.
1104         * i386-tbl.h: Likewise.
1105
1106 2009-01-09  Peter Bergner  <bergner@vnet.ibm.com>
1107
1108         * ppc-opc.c (PPCNONE): Define.
1109         (NOPOWER4): Delete.
1110         (powerpc_opcodes): Initialize the new "deprecated" field.
1111
1112 2009-01-06  H.J. Lu  <hongjiu.lu@intel.com>
1113
1114         AVX Programming Reference (December, 2008)
1115         * i386-dis.c (VEX_LEN_2B_M_0): Removed.
1116         (VEX_LEN_E7_P_2_M_0): Likewise.
1117         (VEX_LEN_2C_P_1): Updated.
1118         (VEX_LEN_E8_P_2): Likewise.
1119         (vex_len_table): Remove VEX_LEN_2B_M_0 and VEX_LEN_E7_P_2_M_0.
1120         (mod_table): Likewise.
1121
1122         * i386-opc.tbl: Add 256bit vmovntdq, vmovntpd and vmovntps.
1123         * i386-tbl.h: Regenerated.
1124
1125 2009-01-05  H.J. Lu  <hongjiu.lu@intel.com>
1126
1127         * i386-gen.c (process_copyright): Update for 2009.
1128
1129         * i386-init.h: Regenerated.
1130         * i386-tbl.h: Likewise.
1131
1132 2009-01-05  H.J. Lu  <hongjiu.lu@intel.com>
1133
1134         AVX Programming Reference (December, 2008)
1135         * i386-dis.c (OP_VEX_FMA): Removed.
1136         (OP_EX_VexW): Likewise.
1137         (OP_EX_VexImmW): Likewise.
1138         (OP_XMM_VexW): Likewise.
1139         (VEXI4_Fixup): Likewise.
1140         (VPERMIL2_Fixup): Likewise.
1141         (VexI4): Likewise.
1142         (VexFMA): Likewise.
1143         (Vex128FMA): Likewise.
1144         (EXVexW): Likewise.
1145         (EXdVexW): Likewise.
1146         (EXqVexW): Likewise.
1147         (EXVexImmW): Likewise.
1148         (XMVexW): Likewise.
1149         (VPERMIL2): Likewise.
1150         (PREFIX_VEX_3A48...PREFIX_VEX_3A4A): Likewise.
1151         (PREFIX_VEX_3A5C...PREFIX_VEX_3A5F): Likewise.
1152         (PREFIX_VEX_3A68...PREFIX_VEX_3A6F): Likewise.
1153         (PREFIX_VEX_3A78...PREFIX_VEX_3A7F): Likewise.
1154         (VEX_LEN_3A6A_P_2...VEX_LEN_3A6F_P_2): Likewise.
1155         (VEX_LEN_3A7A_P_2...VEX_LEN_3A7F_P_2): Likewise.
1156         (get_vex_imm8): Likewise.
1157         (OP_EX_VexReg): Likewise.
1158         vpermil2_op): Likewise.
1159         (EXVexWdq): New.
1160         (vex_w_dq_mode): Likewise.
1161         (PREFIX_VEX_3896...PREFIX_VEX_389F): Likewise.
1162         (PREFIX_VEX_38A6...PREFIX_VEX_38AF): Likewise.
1163         (PREFIX_VEX_38B6...PREFIX_VEX_38BF): Likewise.
1164         (es_reg): Updated.
1165         (PREFIX_VEX_38DB): Likewise.
1166         (PREFIX_VEX_3A4A): Likewise.
1167         (PREFIX_VEX_3A60): Likewise.
1168         (PREFIX_VEX_3ADF): Likewise.
1169         (VEX_LEN_3ADF_P_2): Likewise.
1170         (prefix_table): Remove PREFIX_VEX_3A48...PREFIX_VEX_3A4A,
1171         PREFIX_VEX_3A5C...PREFIX_VEX_3A5F,
1172         PREFIX_VEX_3A68...PREFIX_VEX_3A6F and
1173         PREFIX_VEX_3A78...PREFIX_VEX_3A7F.  Add
1174         PREFIX_VEX_3896...PREFIX_VEX_389F,
1175         PREFIX_VEX_38A6...PREFIX_VEX_38AF and
1176         PREFIX_VEX_38B6...PREFIX_VEX_38BF.
1177         (vex_table): Likewise.
1178         (vex_len_table): Remove VEX_LEN_3A6A_P_2...VEX_LEN_3A6F_P_2
1179         and VEX_LEN_3A7A_P_2...VEX_LEN_3A7F_P_2.
1180         (putop): Support "%XW".
1181         (intel_operand_size): Handle vex_w_dq_mode.
1182
1183         * i386-opc.h (VexNDS): Add a comment for VEX NDS and VEX DDS.
1184
1185         * i386-opc.tbl: Remove vpermil2pd/vpermil2ps and old FMA
1186         instructions.  Add new FMA instructions.
1187         * i386-tbl.h: Regenerated.
1188
1189 2009-01-02  Matthias Klose  <doko@ubuntu.com>
1190
1191         * or32-opc.c (or32_print_register, or32_print_immediate,
1192         disassemble_insn): Don't rely on undefined sprintf behaviour.
1193
1194 For older changes see ChangeLog-2008
1195 \f
1196 Local Variables:
1197 mode: change-log
1198 left-margin: 8
1199 fill-column: 74
1200 version-control: never
1201 End: