1 1998-11-18 Doug Evans <devans@casey.cygnus.com>
3 * cgen-asm.in (insert_1): Replace calls to bfd_getb8/putb8.
4 (insert_normal, !CGEN_INT_INSN_P case): Only fetch enough bytes
6 (insert_insn_normal): Fix typo.
7 * cgen-dis.c (cgen_dis_lookup_insn): Update type of `value' arg.
8 * cgen-dis.in (extract_normal): Ditto. New arg `pc'.
9 Rewrite ! CGEN_INT_INSN_P case.
10 (extract_insn_normal): Ditto.
11 (extract_1): New arg `pc'. All callers updated.
12 Replace calls to bfd_getb8.
14 * cgen-opc.c (cgen_{get,put}_insn_value): Move here ...
15 * cgen-opc.in: ... from here.
16 (@arch@_cgen_lookup_insn): Rewrite ! CGEN_INT_INSN_P case.
17 * m32r-asm.c,m32r-dis.c,m32r-opc.c: Rebuild.
19 * fr30-asm.c,fr30-dis.c,fr30-opc.c: Rebuild.
23 Wed Nov 18 11:30:04 1998 Dave Brolley <brolley@cygnus.com>
25 * fr30-opc.c: Regenerated.
27 Mon Nov 16 19:21:48 1998 Dave Brolley <brolley@cygnus.com>
29 * fr30-opc.c: Regenerated.
30 * fr30-opc.h: Regenerated.
31 * fr30-dis.c: Regenerated.
32 * fr30-asm.c: Regenerated.
34 Thu Nov 12 19:24:18 1998 Dave Brolley <brolley@cygnus.com>
36 * po/opcodes.pot: Regenerated.
37 * fr30-opc.c: Regenerated.
38 * fr30-opc.h: Regenerated.
39 * fr30-dis.c: Regenerated.
40 * fr30-asm.c: Regenerated.
42 Tue Nov 10 15:26:27 1998 Nick Clifton <nickc@cygnus.com>
44 * disassemble.c (disassembler): Add support for FR30 target.
47 Tue Nov 10 11:00:04 1998 Doug Evans <devans@canuck.cygnus.com>
50 * cgen-dis.in (print_normal): CGEN_OPERAND_FAKE renamed to
51 CGEN_OPERAND_SEM_ONLY.
53 * m32r-dis.c,m32r-opc.c,m32r-opc.h: Rebuild.
55 * fr30-dis.c,fr30-opc.c,fr30-opc.h: Rebuild.
57 Mon Nov 9 18:22:55 1998 Dave Brolley <brolley@cygnus.com>
59 * po/opcodes.pot: Regenerate.
60 * po/POTFILES.in: Regenerate.
61 * fr30-opc.c: Regenerate.
62 * fr30-opc.h: Regenerate.
64 Fri Nov 6 17:21:38 1998 Doug Evans <devans@canuck.cygnus.com>
66 * m32r-asm.c: Regenerate.
69 Wed Nov 4 18:46:47 1998 Dave Brolley <brolley@cygnus.com>
71 * configure.in: Added case for bfd_fr30_arch.
72 * Makefile.am (CFILES): Added fr30-asm.c, fr30-dis.c, fr30-opc.c.
73 (ALL_MACHINES): Added fr30-asm.lo, fr30-dis.lo, fr30-opc.lo.
74 (CLEANFILES): Added stamp-fr30.
76 * fr30-asm.c: New file.
77 * fr30-dis.c: New file.
78 * fr30-opc.c: New file.
79 * fr30-opc.h: New file.
80 * po/POTFILES.in: Regenerated
81 * po/opcodes.pot: Regenerated
85 Mon Nov 2 20:08:03 1998 Doug Evans <devans@canuck.cygnus.com>
87 * m32r-opc.c (m32r_cgen_insn_table_entries): Add FILL_SLOT attribute
88 to bcl8,bncl8 entries.
89 (macro_insn_table_entries): Add FILL_SLOT attribute
90 to bcl8r,bncl8r entries.
93 Mon Nov 2 15:05:33 1998 Geoffrey Noer <noer@cygnus.com>
95 * configure.in: detect cygwin* instead of cygwin32*
96 * configure: regenerate
98 Tue Oct 27 08:58:37 1998 Gavin Romig-Koch <gavin@cygnus.com>
100 * mips-opc.c (IS_M): Added.
103 Fri Oct 23 12:06:00 EDT 1998 Frank Ch. Eigler <fche@cygnus.com>
105 * mips-opc.c (vrget, vclipw, vrnext): Correct COP2 opcodes
109 Mon Oct 19 13:03:19 1998 Doug Evans <devans@seba.cygnus.com>
111 start-sanitize-cygnus
112 * cgen-asm.in (insert_1): New function.
113 (insert_normal): Progress on handling ! CGEN_INT_INSN_P.
114 (insert_insn_normal): Update handling of CGEN_INT_INSN_P.
115 (@arch@_cgen_assemble_insn): Update type of `buf' arg.
116 * cgen-dis.in (extract_1): New function.
117 (extract_normal): buf_ctrl renamed to ex_info, update type.
118 Progress on handling of CGEN_INT_INSN_P.
119 (extract_insn_normal): buf_ctrl renamed to ex_info, update type.
120 Update handling of CGEN_INT_INSN_P. Handle errors from
121 @arch@_cgen_extract_operand.
122 (print_insn): Renamed from print_int_insn. Handle ! CGEN_INT_INSN_P.
123 (default_print_insn): Renamed from print_insn.
124 Handle ! CGEN_INT_INSN_P.
125 (print_insn_@arch@): Handle error returns from print_insn.
126 * cgen-opc.in (cgen_get_insn_value, cgen_put_insn_value): New fns.
127 (@arch@_cgen_lookup_insn): Update handling of CGEN_INT_INSN_P.
128 (@arch@_cgen_lookup_get_insn_operands): Ditto.
130 * m32r-opc.c,m32r-opc.h,m32r-asm.c,m32r-dis.c: Regenerate.
133 Wed Oct 14 12:12:25 1998 Jeffrey A Law (law@cygnus.com)
135 * m10300-opc.c: Allow autoincrement stores using the same register
136 for source and destination operands.
138 Mon Oct 12 10:43:51 1998 Jeffrey A Law (law@cygnus.com)
140 * m10300-opc.c: DSP instrutions which only write to one general
141 register have no restrictions on matching operands.
143 * m10300-opc.c (lsr_add): Fix typo for "lsr_add imm,reg,reg,reg" case.
146 Fri Oct 9 14:01:56 1998 Doug Evans <devans@seba.cygnus.com>
148 * m32r-opc.h,m32r-opc.c: Regenerate.
151 Thu Oct 8 06:04:38 1998 Jeffrey A Law (law@cygnus.com)
153 * m10300-opc.c (asr, lsr, asl): Fix am33 single bit shift opcode.
156 Sun Oct 4 21:01:44 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
158 * i386-dis.c (OP_3DNowSuffix): New static function.
161 (dis386_twobyte): Add GRP14, femms, and 3DNow entries.
162 (twobyte_has_modrm): Set entries corresponding to GRP14, 3DNow.
163 (insn_codep): New static variable.
164 (print_insn_x86): Init insn_codep after prefixes.
165 (grps): Add GRP14 entries for prefetch, prefetchw.
168 From Jeff B Epler <jepler@usgs.gov>
169 * i386-dis.c (Suffix3DNow): New table.
171 Wed Sep 30 10:17:50 1998 Nick Clifton <nickc@cygnus.com>
173 * d10v-opc.c: Treat TRAP as if it were a branch type instruction.
175 Mon Sep 28 14:35:43 1998 Martin M. Hunt <hunt@cygnus.com>
177 * d10v-dis.c (print_operand): If num is nonzero, then
178 add OPERAND_ACC1, not OPERAND_ACC0.
180 Thu Sep 24 09:20:03 1998 Nick Clifton <nickc@cygnus.com>
182 * d30v-opc.c: Add FLAG_JSR attribute to DBT, REIT, RTD, and TRAP
185 Tue Sep 22 17:55:14 1998 Nick Clifton <nickc@cygnus.com>
187 * d30v-opc.c: Add use of EITHER_BUT_PREFER_MU execution unit
191 Fri Sep 18 16:23:32 1998 Doug Evans <devans@canuck.cygnus.com>
193 * dvp-opc.c (gif_opcodes): Support EOP on gifimage.
196 Tue Sep 15 15:14:45 1998 Doug Evans <devans@canuck.cygnus.com>
198 * m32r-opc.h,m32r-opc.c: Add bbpc,bbpsw support.
200 start-sanitize-nortel-ppc750
201 1998-09-09 Michael Meissner <meissner@cygnus.com>
203 * ppc-opc.c (powerpc_opcodes): Add support for PowerPC 750 move
206 end-sanitize-nortel-ppc750
207 Fri Sep 4 19:42:59 1998 Nick Clifton <nickc@cygnus.com>
209 * arm-dis.c (print_insn_big_arm): Detect Thumb symbols in elf
211 (print_insn_little_arm): Detect Thumb symbols in elf object
214 Sat Aug 29 22:24:09 1998 Richard Henderson <rth@cygnus.com>
216 * alpha-dis.c (print_insn_alpha): Use the machine type to
217 decide which PALcode set to include.
219 Sun Aug 23 02:16:18 1998 Richard Henderson <rth@cygnus.com>
221 * sparc-opc.c (FBRX): Fix typo in ",a,pn %fcc3" case.
223 Fri Aug 21 16:07:52 1998 Nick Clifton <nickc@cygnus.com>
225 * d30v-opc.c (d30v_opcode_table): Add FLAG_MUL32 to MAC, MACS,
226 MSUB and MSUBS instructions.
229 Tue Aug 18 16:48:52 1998 Ian Lance Taylor <ian@cygnus.com>
231 * mips-opc.c: Insert contents of vu0.h, rather than including it.
233 * Makefile.am: Rebuild dependencies.
237 Thu Aug 13 16:23:04 1998 Ian Lance Taylor <ian@cygnus.com>
239 * ppc-opc.c (powerpc_operands): Omit parens around additions in
242 Wed Aug 12 14:00:38 1998 Ian Lance Taylor <ian@cygnus.com>
244 start-sanitize-coldfire
245 * m68k-opc.c: Correct divsl, divul, remsl, and remul for
246 ColdFire, as below for mulsl and mulul.
248 end-sanitize-coldfire
249 From Peter Jeremy <peter.jeremy@auss2.alcatel.com.au>:
250 * m68k-opc.c: Correct mulsl and mulul to use q rather than D, a,
251 +, -, and d for ColdFire.
253 From Peter Thiemann <thiemann@informatik.uni-tuebingen.de>:
254 * ppc-opc.c (insert_mbe): Handle wrapping bitmasks.
255 (extract_mbe): Likewise.
257 Wed Aug 12 11:11:34 1998 Jeffrey A Law (law@cygnus.com)
259 * m10300-opc.c: Fix typo in udf20 .. udf25 instruction opcodes.
261 * m10300-opc.c: First cut at UDF instructions.
263 Mon Aug 10 14:08:22 1998 Doug Evans <devans@canuck.cygnus.com>
265 * m32r-opc.c: Regenerate (remove semantic descriptions).
267 Mon Aug 10 12:51:12 1998 Catherine Moore <clm@cygnus.com>
269 * arm-dis.c (print_insn_big_arm): Fix indentation.
270 (print_insn_little_arm): Likewise.
272 Sun Aug 9 20:17:28 1998 Catherine Moore <clm@cygnus.com>
274 * arm-dis.c (print_insn_big_arm): Check for thumb symbol
276 (print_insn_little_arm): Likewise.
278 Mon Aug 3 12:43:16 1998 Doug Evans <devans@seba.cygnus.com>
280 Move all global state data into opcode table struct, and treat
281 opcode table as something that is "opened/closed".
282 * cgen-asm.c (all fns): New first arg of opcode table descriptor.
283 (cgen_asm_init): Delete.
284 (cgen_set_parse_operand_fn): New function.
285 * cgen-dis.c (all fns): New first arg of opcode table descriptor.
286 (cgen_dis_init): Delete.
287 * cgen-opc.c (all fns): New first arg of opcode table descriptor.
288 (cgen_current_{opcode_table_mach,endian}): Delete.
289 start-sanitize-cygnus
290 * cgen-asm.in (all fns): New first arg of opcode table descriptor.
291 * cgen-dis.in (all fns): Ditto.
292 * cgen-opc.in (all fns): Ditto.
294 * m32r-asm.c,m32r-dis.c,m32r-opc.c,m32r-opc.h: Regenerate.
296 start-sanitize-cygnus
297 * cgen-asm.in (parse_insn_normal): Ignore case in mnemonics.
299 * cgen-dis.in (print_normal): Split into two.
300 (print_address): New function.
301 (extract_insn_normal): Clarify insn_value arg.
302 (print_int_insn): Renamed from print_insn.
303 (print_insn): New arg.
304 (print_insn_@arch@): Open opcode table if not already done so.
305 Move reading of insn into print_insn.
308 Thu Jul 30 21:41:10 1998 Frank Ch. Eigler <fche@cygnus.com>
310 * d30v-opc.c (d30v_opcode_table): Add new "LKR" flag to some
314 Tue Jul 28 13:15:39 1998 Doug Evans <devans@canuck.cygnus.com>
316 Add support for new versions of mulwhi,mulwlo,macwhi,macwlo that
317 accept an accumulator choice.
318 * m32r-opc.c,m32r-opc.h: Regenerate.
321 Tue Jul 28 11:00:09 1998 Jeffrey A Law (law@cygnus.com)
323 * m10300-opc.c: Add entries for "no_match_operands" field in
327 Fri Jul 24 15:22:40 1998 Jeffrey A Law (law@cygnus.com)
329 * m10300-dis.c: Do not emit a comma before a PLUS (autoincrement)
333 Fri Jul 24 11:41:37 1998 Doug Evans <devans@canuck.cygnus.com>
335 * m32r-asm.c,m32r-opc.c: Regenerate (-Wall cleanups).
338 Thu Jul 23 09:21:03 1998 Jeffrey A Law (law@cygnus.com)
340 * m10300-opc.c: Add DSP autoincrement memory loads/stores.
342 * m10300-opc.c: Add autoincrement memory loads/stores.
346 Wed Jul 22 17:05:40 1998 Jeffrey A Law (law@cygnus.com)
348 * mips-opc.c: Make phmadh and phmsbh synonyms for phmaddh and
349 phmsubh respectively.
352 Tue Jul 21 13:41:07 1998 Doug Evans <devans@seba.cygnus.com>
354 start-sanitize-cygnus
355 * cgen-opc.in (@arch@_cgen_lookup_insn): Update call to
357 (@arch@_cgen_get_insn_operands): @arch@_cgen_get_operand renamed to
358 @arch_cgen_get_int_operand.
359 * cgen-asm.in (insert_insn_normal): New arg `pc', callers updated.
360 Update call to @arch@_cgen_insert_operand.
361 (@arch@_cgen_assemble_insn): Update call to CGEN_INSERT_FN.
362 * cgen-dis.in (print_normal): Delete use of CGEN_PCREL_OFFSET.
363 (extract_insn_normal): New arg `pc', callers updated.
364 Update call to @arch@_cgen_extract_operand.
365 (print_insn): Update call to CGEN_EXTRACT_FN.
367 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
370 Mon Jul 20 12:10:37 1998 Jeffrey A Law (law@cygnus.com)
372 * m10300-opc.c: Fix load to sp and store from sp for the am33.
373 Add more multimedia instructions.
375 Thu Jul 16 18:04:46 1998 Jeffrey A Law (law@cygnus.com)
377 * m10300-opc.c (mn10300_opcodes): Fix opcode for 4 operand "mul" and
382 Mon Jul 13 18:14:24 1998 Jeffrey A Law (law@cygnus.com)
384 * mips-opc.c (pref): Enabled for the r5900.
387 Mon Jul 13 14:53:59 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
389 * i386-dis.c (ckprefix): Handle fwait specially only when it isn't
391 (dofloat): Correct test for fnstsw. Print `fnstsw %ax' rather
393 (OP_J): Remove unnecessary subtraction when 16-bit displacement
394 will be masked later.
397 Fri Jul 10 23:09:56 1998 Jeffrey A Law (law@cygnus.com)
399 * m10300-opc.c (mn10300_opcodes): Fix destination operand for 3 operand
402 Wed Jul 8 11:32:44 1998 Jeffrey A Law (law@cygnus.com)
404 * m10300-dis.c (disassemble): When printing RREGs and XRREGs, map
405 from raw register #s to symbolic names to make debugging easier.
408 Thu Jul 2 17:11:27 1998 Doug Evans <devans@seba.cygnus.com>
410 * m32r-opc.h (CGEN_MIN_INSN_SIZE): New #define.
412 Wed Jul 1 16:11:16 1998 Doug Evans <devans@seba.cygnus.com>
414 * m32r-asm.c,m32r-dis.c,m32r-opc.c,m32r-opc.h: Regenerate.
415 start-sanitize-cygnus
416 * Makefile.am (CGENDIR): Set via configure.
417 (CGEN): New variable.
418 (CGENFILES): object.scm renamed to cos.scm.
419 (run-cgen): Renamed from cgen. stamp file renamed to stamp-$prefix.
420 (stamp-m32r): Pass prefix to run-cgen.
421 * Makefile.in: Regenerate.
422 * cgen-asm.in: @arch@-opc.h renamed to @prefix@-opc.h.
423 * cgen-dis.in: Ditto.
424 * cgen-opc.in: Ditto.
425 * cgen.sh: New args cgen,prefix. Delete args scheme,schemeflags.
426 * configure.in: AC_SUBST cgen,cgendir. No longer look for guile.
427 * configure: Regenerate.
431 Tue Jun 30 09:59:37 1998 Jeffrey A Law (law@cygnus.com)
433 * m10300-opc.c: Reorder "movbu" and "movhu" instructions too.
435 Mon Jun 29 14:54:32 1998 Jeffrey A Law (law@cygnus.com)
437 * m10300-opc.c: Reorder more instructions so that we do not
438 accidentally match a mn10300 instruction when we really
439 wanted an am33 instruction.
442 Fri Jun 26 11:08:55 1998 Jeffrey A Law (law@cygnus.com)
444 * m10300-dis.c: Only recognize instructions from the currently
446 * m10300-opc.c: Add field indicating the particular variant of
447 the mn10300 each instruction is available on.
449 Fri Jun 26 12:04:21 1998 Ian Lance Taylor <ian@cygnus.com>
451 * configure.in: For bfd_vax_arch, build vax-dis.lo.
452 * Makefile.am: Rebuild dependencies.
453 (CFILES): Add vax-dis.c.
454 (ALL_MACHINES): Add vax-dis.lo.
455 * aclocal.m4: Rebuild with current libtool.
456 * configure, Makefile.in: Rebuild.
458 Fri Jun 26 12:03:20 1998 Klaus Kaempf <kkaempf@progis.de>
460 * vax-dis.c: New file, from work by Pauline Middelink
461 <middelin@polyware.iaf.nl>.
462 * disassemble.c (ARCH_vax): Define if ARCH_all.
463 (disassembler): Add case for ARCH_vax.
464 * makefile.vms: Support compilation on vms/vax.
467 Wed Jun 24 17:14:01 1998 Ian Carmichael <iancarm@cygnus.com>
469 * dvp-opc.c (DVP_OPERAND_RELOC_11_S4): Temporarily back out
470 the DVP_OPERAND_RELOC_11_S4 relocation.
474 Wed Jun 24 09:53:06 1998 Jeffrey A Law (law@cygnus.com)
476 * m10300-dis.c (print_insn_mn10300): 0xf7 opcode prefix specifies
478 (disassemble): Correctly handle FMT_D10 instructions.
480 * m10300-opc.c (mn10300_opcodes): Fix typo in IMM24 versions of the
481 am33 shift instructions.
483 * m10300-dis.c (print_insn_mn10300): 0xf9 opcode prefix specifies
485 (disassemble): Handle new instruction formats FMT_D6, FMT_D7, FMT_D8
486 FMT_D9 and FMT_D10. Handle various new opcode flags for the am33.
488 * m10300-opc.c (IMM32_HIGH8_MEM): New operand type.
489 (mn10300_opcodes): Reorder so as to try and select opcodes from
490 the core chip when multiple alternatives exist. Change several
491 am33 instructions to use IMM32_HIGH8_MEM. Fix typos in "mac" and
492 "macbu" instructions. Fix typos in a couple DSP instructions too.
495 Tue Jun 23 19:42:18 1998 Mark Alexander <marka@cygnus.com>
497 * m10200-dis.c (print_insn_mn10200): Fix various non-portabilities
498 related to sign extension and the size of ints.
500 Tue Jun 23 10:59:26 1998 Jeffrey A Law (law@cygnus.com)
502 * m10300-opc.c: Support one operand "asr", "lsr" and "asl"
503 instructions. Support (sp) addressing mode by expanding it into
507 Mon Jun 22 15:48:29 1998 Ian Carmichael <iancarm@cygnus.com>
509 * dvp-opc.c (LIMM11, LUIMM15): New symbol types
510 DVP_OPERAND_RELOC_U15_S3 and DVP_OPERAND_RELOC_11_S4 to allow labels to
511 be used as immediate values.
515 Mon Jun 22 13:36:27 1998 Jeffrey A Law (law@cygnus.com)
517 * m10300-opc.c: Support 4 byte DSP instructions.
520 Sat Jun 20 14:46:20 1998 Frank Ch. Eigler <fche@cygnus.com>
522 * mips-dis.c (_print_insn_mips): Fix argument interchange typo.
525 Fri Jun 19 16:47:06 1998 Jeffrey A Law (law@cygnus.com)
527 * m10300-opc.c: Support 6 and 7 byte am33 instructions.
530 Fri Jun 19 09:16:42 1998 Mark Alexander <marka@cygnus.com>
532 * m10200-dis.c (print_insn_mn10200): Recognize 'break' pseudo-op.
535 Fri Jun 19 09:42:51 1998 Jeffrey A Law (law@cygnus.com)
537 * m10300-opc.c: Support for 3 byte and 4 byte extended instructions
538 found on the mn10300.
541 1998-06-18 Ulrich Drepper <drepper@cygnus.com>
543 * i386-dis.c: Add support for fxsave, fxrstor, sysenter and
546 Thu Jun 18 10:22:24 1998 John Metzler <jmetzler@cygnus.com>
548 * mips-dis.c (print_insn_little_mips): Previously, instruction
549 printing references the symbol table to determine whether the
550 instruction resides in a block regular instructions or mips16
551 instructions. However, when the disassembler gets used in other
552 environments where the symbol table is not present, we no longer
553 rely in the symbol table, rather, use the low bit of the
554 instructions address to guess. There should be no change for usage
555 of the disassembler in host based programse, gdb ,objdump.
556 (print_insn_big_mips): ditto.
557 (print_insn_mips): ditto
559 Wed Jun 17 21:19:01 1998 Mark Alexander <marka@cygnus.com>
561 * m10200-dis.c (print_insn_mn10200): Don't bomb on unknown opcodes.
563 Wed Jun 17 17:49:23 1998 Jeffrey A Law (law@cygnus.com)
566 * m10300-opc.c (USP, SSP, MSP, PC, IMM4, EPSW, RN0, RM1): New
567 operands for the am33.
568 (mn10300_opcodes): Add new instructions from the am33.
570 * m10300-opc.c (mn10300_opcodes): Change opcode for "syscall".
572 Tue Jun 16 13:10:51 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
574 * i386-dis.c (index16): Add '%' to register names. Use ','
577 Sat Jun 13 11:33:55 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
579 * i386-dis.c: Don't print opcode suffix when we can figure out the
580 size (and gas can!) by register operands, or from the default
582 (putop): Handle 'A', 'B', 'L', 'P', 'Q', 'R' macros. Rename 'C'
584 (dis386, dis386_twobyte, grps): Use new suffix macros.
585 (dis386): Correct imul Ib to imul sIb. Change jnl to jge to be
586 consistent. Add suffix for call, jmp, lcall, ljmp, iret. Reverse
587 order of cmps operands to agree with Intel docs. Correct operand
588 of aad and aam (Ib -> sIb). Change ud2b from 0fb8 to 0fb9 to
589 agree with Intel docs.
590 (print_insn_x86): Print orphan fwait before other prefixes.
591 Return correct byte count for orphan fwait with prefixes. Don't
592 print `bound' operands in reverse order.
593 (ckprefix): Stop accumulating prefixes if we get fwait.
594 (OP_DIR): Print `$' before Ap operands of ljmp, lcall.
596 Fri Jun 12 13:40:38 1998 Tom Tromey <tromey@cygnus.com>
598 * po/Make-in (all-yes): If maintainer mode, depend on .pot file.
599 ($(PACKAGE).pot): Unconditionally depend on POTFILES.
601 Fri Jun 12 11:04:06 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
603 Fix problems when bfd_vma is wider than long.
604 * i386-dis.c: Make op_address and start_pc unsigned.
605 (set_op): Make parameter unsigned.
606 (print_insn_x86): Cast to bfd_vma when passing a value to
608 * ns32k-dis.c (CORE_ADDR): Don't define.
609 (print_insn_ns32k): Change type of addr to bfd_vma. Use
610 bfd_scan_vma to read back address.
611 (print_insn_arg): Change type of addr to bfd_vma. Use sprintf_vma
613 * m68k-dis.c (COERCE32): Cast to bfd_signed_vma to avoid overflow.
614 (NEXTULONG): New definition.
615 (print_insn_m68k): Avoid overflow when computing third argument of
617 (print_insn_arg): Use NEXTULONG to fetch 32 bit address values.
618 Use disp instead of val to store offset values.
619 (print_indexed): Use base_disp instead of word to store base
620 displacement, to avoid overflow.
621 * m10300-dis.c (disassemble): Cast value to long when computing
622 pc-relative address, to get correct sign extension.
624 Wed Jun 10 15:58:37 1998 Doug Evans <devans@canuck.cygnus.com>
626 * m32r-opc.c: Regenerate.
628 Tue Jun 9 14:27:57 1998 Nick Clifton <nickc@cygnus.com>
630 * arm-opc.h (thumb_opcodes): Display 'add rx, rY, #0' insns as
631 'mov rX, rY'. Patch courtesy of Tony Thompson <Tony.Thompson@arm.com>
633 Mon Jun 8 18:17:21 1998 Nick Clifton <nickc@cygnus.com>
635 * d30v-opc.c: Remove FALG_MUL32 attribyte from MULX2H insn.
637 Fri Jun 5 23:47:55 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
639 * i386-dis.c: Combine aflag and dflag into sizeflag. Change OP_*
641 (OP_DSreg): Rename from OP_DSSI.
642 (OP_ESreg): Rename from OP_ESDI.
643 (Xb, Xv, Yb, Yv): Use index reg code, not b_mode or v_mode.
645 (append_seg): Rename from append_prefix.
646 (ptr_reg): New function.
647 (dis386): Add S suffix to pushf, popf, ret, lret, enter, leave.
649 (PREFIX_ADDR): Rename from PREFIX_ADR.
650 (float_reg): Add non-broken opcodes for people who don't want
653 Fri Jun 5 19:15:04 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
655 * m68k-opc.c (tstb, tstw, tstl): Don't allow pcrel on
658 Wed Jun 3 18:56:22 1998 H.J. Lu <hjl@gnu.org>
660 * i386-dis.c (dis386): Change 0x60 to "pushaS", 0x61 to "popaS".
662 Tue Jun 2 15:06:46 1998 Geoff Keating <geoffk@ozemail.com.au>
664 * ppc-opc.c (powerpc_macros): Support shifts and rotates of size
665 0; produce error message for shifts of size 32 (or 64 for 64-bit
666 shifts), because the hardware doesn't support them.
669 Mon Jun 1 10:27:26 1998 Jeffrey A Law (law@cygnus.com)
671 * mips-opc.c (c.lt.s): Remove r5900 specific variant.
674 * vu0.h (sqc2): Fix opcode.
676 * mips-opc.c (rsqrt.s): Update based on r5900 ISA manual version 2.1
680 start-sanitize-cygnus
681 Thu May 28 08:46:09 1998 Catherine Moore <clm@cygnus.com>
683 * mips-opc.c (macc, maccu, macchi, macchiu, msac, msacu, msachi, msachiu):
684 Change pinfo to use WR_HILO.
687 Wed May 27 15:29:13 1998 Nick Clifton <nickc@cygnus.com>
689 * d30v-opc.c: Add new operand: Ra3. Change SHORT_B3, SHORT_B3b,
690 LONG_2, LONG_2b formats to use this new operand.
692 Tue May 26 20:47:48 1998 Stan Cox <scox@cygnus.com>
694 * sparc-dis.c (compute_arch_mask): Added bfd_mach_sparc_sparclite_le.
696 Tue May 26 20:45:33 1998 Mark Alexander <marka@cygnus.com>
698 * sparc-dis.c (print_insn_sparc): big endian instruction / little
701 Tue May 26 16:14:39 1998 Nick Clifton <nickc@cygnus.com>
703 * d30v-opc.c (d30v_format_table): Change definition of SHORT_B3
704 and SHORT_B3b formats to use Rb instead of Ra.
706 Add FLAG_MUL16 to MUL2XH opcode.
708 Add FLAG_ADDSUBppp to SRC and SATHp opcodes to implement extension
709 to existing 1.1.1 parallelisation prohibition procedure.
711 Fri May 22 16:00:00 1998 Doug Evans <devans@canuck.cygnus.com>
713 * cgen-asm.in (insert_normal): Handle empty fields and 64 bit hosts.
714 * cgen-dis.in (extract_normal): Likewise.
715 * m32r-asm.c,m32r-dis.c: Regenerate.
718 Fri May 22 11:44:10 1998 Doug Evans <devans@canuck.cygnus.com>
720 * dvp-opc.c (parse_dotdest): Missing dest -> xyzw.
724 Wed May 20 00:22:27 1998 Jeffrey A Law (law@cygnus.com)
726 * mips-opc.c (multu1): Add two operand variant for the r5900.
729 Tue May 19 17:36:08 1998 Ian Lance Taylor <ian@cygnus.com>
731 * mips-dis.c (print_mips16_insn_arg): Handle type ']' correctly
732 with a shift count of 0.
735 Mon May 18 14:27:06 1998 Frank Ch. Eigler <fche@cygnus.com>
737 * mips-opc.c (mult1): Add two-operand variety of mult1 for R5900.
739 Mon May 18 11:44:00 1998 Jeffrey A Law (law@cygnus.com)
741 * mips-dis.c (print_insn_arg): Handle ';' opcode completer.
742 (_print_insn_mips): Likewise.
743 * vu0.h (vopmula, vopmsub): Correctly handle opcode/operand
747 Fri May 15 14:58:31 1998 Doug Evans <devans@seba.cygnus.com>
749 * cgen-opc.c (cgen_hw_lookup_by_name): Renamed from cgen_hw_lookup.
750 (cgen_hw_lookup_by_num): New function.
753 * m32r-opc.c, m32r-opc.h: Regenerate, delete h-abort.
756 Wed May 13 17:03:59 1998 Doug Evans <devans@canuck.cygnus.com>
758 * m32r-asm.c: Regenerate (handle uppercase HIGH/SHIGH/LOW/SDA).
760 Wed May 13 14:34:31 1998 Mark Alexander <marka@cygnus.com>
762 * sparc-dis.c (print_insn_sparc): Always fetch instructions
763 as big-endian on SPARClite.
766 Tue May 12 13:39:51 1998 Nick Clifton <nickc@cygnus.com>
768 * m32r-opc.c: Regenerated - SPECIAL attribute added to some
770 * m32r-opc.h: Regenerated - SPECIAL attribute added to some
774 Tue May 12 11:46:31 1998 Richard Henderson <rth@cygnus.com>
776 * d30v-opc.c (pre_defined_register): Remove alias for r0.
779 Mon May 11 13:12:15 1998 Frank Ch. Eigler <fche@cygnus.com>
781 * mips-opc.c (break): Added 20-bit single-operand break
782 instruction for R5900 only.
785 Sun May 10 22:37:22 1998 Jeffrey A Law (law@cygnus.com)
787 * po/Make-in (install-info): New target.
789 Thu May 7 17:15:59 1998 Ian Lance Taylor <ian@cygnus.com>
791 * configure.in (WIN32LIBADD): Add -lintl on cygwin32.
792 * configure: Rebuild.
794 Thu May 7 12:49:46 1998 Frank Ch. Eigler <fche@cygnus.com>
796 * mips-opc.c (teq,tge,tgeu,tlt,tltu,tne): Added three-operand
797 variety of ISA2 instructions to set bottom ten bits of trap code.
799 Thu May 7 11:54:25 1998 Ian Lance Taylor <ian@cygnus.com>
801 * Makefile.am (config.status): Add explicit target so that
802 config.status depends upon bfd/configure.in.
803 * Makefile.in: Rebuild.
805 Thu May 7 09:33:02 1998 Frank Ch. Eigler <fche@cygnus.com>
807 * mips-opc.c (break, sdbbp): Added two-operand variety of ISA1
808 instructions to set bottom ten bits of break code.
809 * mips-dis.c (print_insn_arg): Implement 'q' operand format used
810 for above optional argument.
812 start-sanitize-cygnus
813 Wed May 6 14:47:17 1998 Doug Evans <devans@seba.cygnus.com>
815 * cgen.sh: s/@ARCH@/${ARCH}/ in opc.h generation.
816 * m32r-opc.h: Regenerate.
819 Wed May 6 15:30:06 1998 Klaus Kaempf <kkaempf@progis.de>
821 * makefile.vms: Run dec c with /nodebug.
823 Mon May 4 10:19:57 1998 Tom Tromey <tromey@cygnus.com>
825 * Makefile.in: Rebuilt.
826 * Makefile.am: Regenerated dependencies with mkdep.
828 * opintl.h (_): Define as dgettext.
830 start-sanitize-cygnus
831 Fri May 1 13:47:42 1998 Doug Evans <devans@canuck.cygnus.com>
833 * configure.in: Add support for --enable-cgen-maint.
834 * Makefile.am (M32R_DEPS): New variable.
835 (m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c): Update dependencies.
836 * aclocal.m4: Regenerate.
837 * Makefile.in: Regenerate.
838 * configure: Regenerate.
840 * Makefile.am (CGENFILES): Add minsn.scm.
843 Tue Apr 28 14:12:12 1998 Nick Clifton <nickc@cygnus.com>
845 * cgen-asm.c: Internationalised.
846 start-sanitize-cygnus
847 * cgen-asm.in: Internationalised.
848 * cgen-opc.in: Internationalised.
850 * m32r-asm.c: Internationalised.
851 * m32r-dis.c: Internationalised.
852 * m32r-opc.c: Internationalised.
854 * aclocal.m4: Regenerated.
855 * configure: Regenerated.
856 * Makefile.am (POTFILES): Remove inclusion of BFD_H.
857 * Makefile.in: Rebuild.
858 * po/POTFILES.in: Rebuilt using rule in Makefile.in.
859 * po/opcodes.pot: Rebuilt after changing POTFILES.in.
861 Tue Apr 28 13:13:13 1998 Ian Lance Taylor <ian@cygnus.com>
863 * configure.in: Call AC_ISC_POSIX near start. Move CY_GNU_GETTEXT
865 * aclocal.m4, configure: Rebuild with current tools.
867 Mon Apr 27 14:31:00 1998 Nick Clifton <nickc@cygnus.com>
869 * opintl.h: New file - contains internationalisation macros used
870 by source files in this directory.
871 * po/: New subdirectory - contains internationalisation files.
872 * po/Make-in: New file - Makefile constructor.
873 * po/POTFILES.in: New file - list of files in opcodes directory
874 that should be scan for internationalisation macros.
875 * po/opcodes.pot: New file - list of internationisation strings
876 found in files mentioned in po/POTFILES.in.
877 * Makefile.am: Add rule to build po/POTFILES.in. Add SUBDIRS
878 entry. Add intl directory to include paths.
879 * acconfig.h: Add ENABLE_NLS, HAVE_CATGETS, HAVE_GETEXT,
880 HAVE_STRCPY, HAVE_LC_MESSAGES
881 * configure.in: Add rule to build Makefile in po subdirectory.
882 * Makefile.in: Rebuilt.
883 * aclocal.m4: Rebuilt.
884 * config.in: Rebuilt.
885 * configure: Rebuilt.
886 * alpha-opc.c: Internationalised.
887 * arc-dis.c: Internationalised.
888 * arc-opc.c: Internationalised.
889 * arm-dis.c: Internationalised.
890 * cgen-asm.c: Internationalised.
891 * d30v-dis.c: Internationalised.
892 * dis-buf.c: Internationalised.
894 * dvp-dis.c: Internationalised.
895 * dvp-opc.c: Internationalised.
897 * h8300-dis.c: Internationalised.
898 * h8500-dis.c: Internationalised.
899 * i386-dis.c: Internationalised.
900 * m10200-dis.c: Internationalised.
901 * m10300-dis.c: Internationalised.
902 * m68k-dis.c: Internationalised.
903 * m88k-dis.c: Internationalised.
904 * mips-dis.c: Internationalised.
905 * ns32k-dis.c: Internationalised.
906 * opintl.h: Internationalised.
907 * ppc-opc.c: Internationalised.
908 * sparc-dis.c: Internationalised.
909 * v850-dis.c: Internationalised.
910 * v850-opc.c: Internationalised.
912 Mon Apr 27 10:33:56 1998 Doug Evans <devans@seba.cygnus.com>
914 * cgen-asm.c (cgen_current_opcode_table): Renamed from ..._data.
915 (asm_hash_table_entries): New variable.
916 (cgen_asm_init): Free asm_hash_table_entries.
917 (hash_insn_array,hash_insn_list): New functions.
918 (build_asm_hash_table): Use them. Hash macro insns as well.
919 (cgen_asm_lookup_insn): Update.
920 * cgen_dis.c (cgen_current_opcode_table): Renamed from ..._data.
921 (dis_hash_table_entries): New variable.
922 (cgen_dis_init): Free dis_hash_table_entries.
923 (hash_insn_array,hash_insn_list): New functions.
924 (build_dis_hash_table): Use them. Hash macro insns as well.
925 (cgen_dis_lookup_insn): Update.
926 * cgen-opc.c (cgen_current_opcode_table): Renamed from ..._data.
927 (cgen_set_cpu,cgen_hw_lookup,cgen_insn_count): Update.
928 (cgen_macro_insn_count): New function.
929 * cgen-opc.in (@arch@_cgen_lookup_insn): New arg alias_p.
930 All callers updated. Sanity check result of extract fn.
931 (@arch@_cgen_get_insn_operands): Change result type to void.
932 Delete args insn_value, length. New arg fields. All callers updated.
933 (@arch@_cgen_lookup_get_insn_operands): New function.
934 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
936 Fri Apr 24 16:07:57 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
938 * i386-dis.c (OP_DSSI): Print segment override.
941 Thu Apr 23 12:32:07 1998 Frank Ch. Eigler <fche@cygnus.com>
943 * mips-opc.c (msub.s): Correct mask pattern for disassembly.
947 Mon Apr 20 19:11:55 1998 Frank Ch. Eigler <fche@cygnus.com>
949 * mips-opc.c (madd.s): Correct mask pattern for disassembly.
953 Sat Apr 18 00:29:18 1998 Jeffrey A Law (law@cygnus.com)
955 * vu0.h (vlqd, vlqi): Update per revised specs.
959 Thu Apr 16 11:44:59 1998 Doug Evans <devans@canuck.cygnus.com>
961 * dvp-opc.c (parse_vif_unpackloc,insert_vif_unpackloc): Delete.
962 (vif_operands): Update.
963 (vif_get_unpackloc): Delete.
964 (state_vif_unpackloc{,_star_p}): Delete.
965 (dvp_opcode_init_parse): Update.
966 (vif_unpack_len_value): Avoid divide by zero.
970 Wed Apr 15 10:30:07 1998 Frank Ch. Eigler <fche@cygnus.com>
972 * vu0.h: Specs changed for VCALLMSR bit pattern.
973 * mips-dis.c: (print_insn_arg) Matching change.
976 Mon Apr 13 16:59:39 1998 Nick Clifton <nickc@cygnus.com>
978 * arm-dis.c (print_insn_arm): Add "_all" extension to 'C'
981 Mon Apr 13 16:50:27 1998 Ian Lance Taylor <ian@cygnus.com>
983 * Makefile.am (libopcodes_la_LIBADD): Add @WIN32LIBADD@.
984 (libopcodes_la_LDFLAGS): Add @WIN32LDFLAGS@.
985 * configure.in: Define and substitute WIN32LDFLAGS and
987 * aclocal.m4: Rebuild with new libtool.
988 * configure, Makefile.in: Rebuild.
991 Mon Apr 13 16:02:02 1998 Frank Ch. Eigler <fche@cygnus.com>
993 * vu0.h: Corrected bit pattern for VMAXI opcode.
996 Fri Apr 10 18:14:31 1998 Doug Evans <devans@canuck.cygnus.com>
998 * m32r-opc.c: Regenerate.
1001 Mon Apr 6 17:16:48 1998 Doug Evans <devans@canuck.cygnus.com>
1003 * dvp-opc.c (vif_macros): Tweak unpackloc operand.
1004 (dvp_expand_macro): Implement.
1005 (insert_vif_datalen): Record value with max+1 -> 0 conversion.
1006 (vif_unpack_len): Perform 0 -> max+1 conversion on `wl' value.
1009 Sun Apr 5 16:04:39 1998 H.J. Lu <hjl@gnu.org>
1011 * Makefile.am (stamp-lib): Check that .libs/libopcodes.a exists
1012 before trying to copy it.
1013 * Makefile.in: Rebuild.
1015 Thu Apr 2 17:25:49 1998 Nick Clifton <nickc@cygnus.com>
1017 * m32r-opc.c: Use signed immediate values for CMPUI instruction.
1019 start-sanitize-m32rx
1020 Thu Apr 2 16:44:23 1998 Nick Clifton <nickc@cygnus.com>
1022 * m32r-opc.c: Fix bit patterns for SAT and SATB.
1025 Wed Apr 1 16:20:27 1998 Ian Dall <Ian.Dall@dsto.defence.gov.au>
1027 * ns32k-dis.c (bit_extract_simple): New function to extract bits
1028 from an arbitrary valid buffer instead of fetching them on demand
1030 (invalid_float): use bit_extract_simple() instead of bit_extract().
1032 start-sanitize-m32rx
1033 Wed Apr 1 14:57:54 1998 Nick Clifton <nickc@cygnus.com>
1035 * m32r-opc.c: Fix SATB bit pattern. Add extra control registers.
1036 * m32r-opc.h: Add extra control registers.
1039 Tue Mar 31 11:09:08 1998 Ian Lance Taylor <ian@cygnus.com>
1041 From H.J. Lu <hjl@gnu.org>:
1042 * i386-dis.c (dis386): Change 0x8c and 0x8e to movS, and change Ew
1045 Mon Mar 30 17:32:03 1998 Ian Lance Taylor <ian@cygnus.com>
1047 * Branched binutils 2.9.
1049 Mon Mar 30 15:18:00 1998 Ken Raeburn <raeburn@cygnus.com>
1051 * d30v-dis.c (print_insn_d30v): Don't use uninitialized "num" when
1052 disassembling last 4 bytes of a section.
1054 Fri Mar 27 18:08:13 1998 Ian Lance Taylor <ian@cygnus.com>
1056 Fix some gcc -Wall warnings:
1057 * arc-dis.c (print_insn): Add casts to avoid warnings.
1058 * cgen-opc.c (cgen_keyword_lookup_name): Likewise.
1059 * d10v-dis.c (dis_long, dis_2_short): Likewise.
1061 * dvp-opc.c (issymchar, SKIP_BLANKS): Likewise.
1062 (parse_dotdest, parse_dotdest1, u_parse_sdest): Likewise.
1063 (parse_bc, parse_vfreg, parse_accdest): Likewise.
1064 (parse_ffstreg, parse_vif_mode): Likewise.
1066 * m10200-dis.c (disassemble): Likewise.
1067 * m10300-dis.c (disassemble): Likewise.
1068 * ns32k-dis.c (print_insn_ns32k): Likewise.
1069 * ppc-opc.c (insert_ral, insert_ram): Likewise.
1070 * cgen-dis.c (build_dis_hash_table): Remove used local variables.
1071 * cgen-opc.c (cgen_keyword_search_next): Likewise.
1072 * d10v-dis.c (dis_long, dis_2_short): Likewise.
1073 * d30v-dis.c (print_insn_d30v, lookup_opcode): Likewise.
1075 * dvp-dis.c (print_dma, print_vif, print_gif): Likewise.
1076 * dvp-opc.c (parse_dest1, print_uflags): Likewise.
1077 (parse_gif_nloop, dvp_opcode_init_tables): Likewise.
1079 * ns32k-dis.c (bit_extract, print_insn_ns32k): Likewise.
1080 start-sanitize-tic80
1081 * tic80-dis.c (print_one_instruction): Likewise.
1083 * w65-dis.c (print_operand): Likewise.
1084 * z8k-dis.c (fetch_data): Likewise.
1085 * a29k-dis.c: Add return type for find_byte_func_type.
1086 * arc-opc.c: Include <stdio.h>. Remove declarations of
1087 insert_multshift and extract_multshift.
1088 * d30v-dis.c (lookup_opcode): Parenthesize assignments in
1090 (extract_value): Fully parenthesize expression.
1092 * dvp-opc.c: Include <ctype.h>.
1093 (print_sdest): Add default case to switch.
1095 * h8500-dis.c (print_insn_h8500): Initialize local variables.
1096 * h8500-opc.h (h8500_table): Fully bracket initializer.
1097 * w65-opc.h (optable): Likewise.
1098 * i386-dis.c (print_insn_x86): Declare aflag and flag parameters.
1099 * i386-dis.c (OP_E): Initialize local variables.
1100 * m10200-dis.c (print_insn_mn10200): Likewise.
1101 * mips-dis.c (print_insn_mips16): Likewise.
1102 * sh-dis.c (print_insn_shx): Likewise.
1103 * v850-dis.c (print_insn_v850): Likewise.
1104 * ns32k-dis.c (print_insn_arg): Declare.
1105 (get_displacement, invalid_float): Declare.
1106 (list_search, sign_extend, flip_bytes): Declare return type.
1107 (get_displacement): Likewise.
1108 (print_insn_arg): Likewise. Make d int. Fix sprintf format
1110 (print_insn_ns32k): Make i unsigned.
1111 (invalid_float): Make static. Declare type of val.
1112 * tic30-dis.c (print_par_insn): Make i size_t. Don't check strlen
1113 on each for iteration.
1114 * tic30-dis.c (get_indirect_operand): Likewise.
1115 * z8k-dis.c (print_insn_z8001): Declare return type.
1116 (print_insn_z8002): Likewise.
1117 (unparse_instr): Fix sprintf format strings.
1119 Fri Mar 27 00:05:23 1998 Jeffrey A Law (law@cygnus.com)
1121 * mips-opc.c: Add "sync.l" and "sync.p".
1124 Thu Mar 26 13:27:37 1998 Doug Evans <devans@canuck.cygnus.com>
1126 * dvp-opc.c (extract_vif_datalen): Rewrite.
1127 (vif_insn_len): Perform 0->max+1 conversion for direct length.
1129 Wed Mar 25 13:32:36 1998 Doug Evans <devans@canuck.cygnus.com>
1131 * dvp-dis.c (print_insn): Print unpack address in hex.
1132 * dvp-opc.c (parse_vif_mpgloc): Renamed from parse_vif_mpgloc_star.
1133 Don't skip over '*', just record it.
1134 (insert_vif_mpgloc): Don't update state_vif_mpgloc if '*' value.
1135 (parse_vif_unpackloc): Renamed from parse_vif_unpackloc_star.
1136 Don't skip over '*', just record it.
1137 (insert_vif_unpackloc): Don't update state_vif_unpackloc if '*' value.
1138 (vif_operands): Delete VIF_MPGLOC_STAR,VIF_UNPACKLOC_STAR entries.
1139 (vif_opcodes): Likewise.
1140 (state_vif_{mpg,unpack}loc_star_p): New static locals.
1141 (vif_macros,vif_macro_count): New globals.
1142 (vif_unpack_len_value): New arguments wl,cl. All callers updated.
1143 (vif_set_{mpg,unpack}loc): Delete. All callers updated.
1144 (vif_get_wl_cl): New function.
1145 (dvp_opcode_init_parse): Init mpgloc,unpackloc state.
1148 Wed Mar 25 14:32:48 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1150 * m68k-dis.c (print_insn_m68k): Use info->mach to select the
1151 default m68k variant to recognize.
1153 * i960-dis.c (pinsn): Change type of first argument to bfd_vma.
1154 (ctrl, cobr, mem, ea): Likewise.
1155 (print_addr): Likewise. Remove cast.
1156 (ea): Cast argument of print_addr to bfd_vma.
1158 * cgen-asm.c (cgen_parse_signed_integer): Fix type of local
1160 (cgen_parse_unsigned_integer): Likewise.
1161 (cgen_parse_address): Likewise.
1163 Wed Mar 25 14:31:31 1998 Ian Lance Taylor <ian@cygnus.com>
1165 * i960-dis.c (ctrl): Add full braces to structure initialization.
1166 (cobr, mem, reg): Likewise.
1167 (ea): Correct parenthesization in expression.
1169 * cgen-asm.c: Include <ctype.h>.
1170 (build_asm_hash_table): Remove unused local variable i.
1171 (cgen_parse_keyword): Add casts to avoid warnings.
1173 * arm-dis.c (print_insn_big_arm): Only call coffsymbol for a COFF
1174 symbol. Fix indentation.
1175 (print_insn_little_arm): Likewise.
1177 start-sanitize-r5900
1178 Tue Mar 24 18:11:13 1998 Jeffrey A Law (law@cygnus.com)
1180 * vu0.h (cfc2, ctc2): Add variants with ".i" and ".ni"
1184 start-sanitize-m32rx
1185 Mon Mar 23 11:32:11 1998 Nick Clifton <nickc@cygnus.com>
1187 * m32r-opc.c (m32r_cgen_insn_table_entries): Fix SATH bit pattern
1192 Mon Mar 23 09:45:04 1998 Doug Evans <devans@canuck.cygnus.com>
1194 * dvp-opc.c (vif_operand_datalen_special): New global.
1197 start-sanitize-r5900
1198 Sun Mar 22 13:00:14 1998 Jeffrey A Law (law@cygnus.com)
1200 * vu0.h (vcallms): Use 'O' for call target operand.
1201 * mips-dis.c (print_insn_arg): Handle 'O'.
1204 Fri Mar 20 18:55:18 1998 Ian Lance Taylor <ian@cygnus.com>
1206 * configure.in: Use AM_DISABLE_SHARED.
1207 * aclocal.m4, configure: Rebuild with libtool 1.2.
1209 start-sanitize-r5900
1210 Fri Mar 20 09:01:31 1998 Jeffrey A Law (law@cygnus.com)
1212 * mips-dis.c: Change '%' to '#' in r5900 support.
1216 Thu Mar 19 15:46:53 1998 Nick Clifton <nickc@cygnus.com>
1218 These patches are courtesy of Jonathan Walton and Tony Thompson
1219 (athompso@cambridge.arm.com).
1221 * arm-dis.c (print_insn_thumb): Ignore bottom two bits of PC
1224 * arm-opc.h (thumb_opcodes): Annotate PC relative addresses with
1225 both the offset and the label closest to the destination.
1227 start-sanitize-r5900
1228 Thu Mar 19 13:53:25 1998 Jeffrey A Law (law@cygnus.com)
1230 * vu0.h: New file with cop2/vu0 instructions.
1231 * mips-opc.c: Include vu0.h.
1232 * mips-dis.c (print_insn_arg): Handle new args 0-9, +, -, %, K, &,
1234 (print_insn_mips): Do not emit a tab after an instruction if the
1235 first arg is an instruction completer (&). If the next arg is an
1236 escape character (%), then print the next arg verbatim.
1237 * Makefile.am (mips-opc.lo): Depend on vu0.h
1241 Thu Mar 19 10:42:51 1998 Doug Evans <devans@canuck.cygnus.com>
1243 * dvp-opc.c (vif_opcodes): Add stcycl.
1245 Tue Mar 17 10:53:58 1998 Doug Evans <devans@canuck.cygnus.com>
1247 * dvp-dis.c (print_dma): Change length from 16 to 8.
1250 Sat Mar 14 23:47:14 1998 Doug Evans <devans@seba.cygnus.com>
1252 * m32r-opc.h: Regenerate.
1255 Thu Mar 12 09:18:54 1998 Doug Evans <devans@canuck.cygnus.com>
1257 * dvp-opc.c (print_dest1): Print dest spec again.
1258 (print_vfreg,print_accdest): Likewise.
1259 (vif_unpack_len): Round result up to word boundary.
1262 start-sanitize-vr4320
1263 Tue Mar 10 15:57:23 1998 Gavin Koch <gavin@cygnus.com>
1265 * mips-opc.c ("clz","dclz"): Added the 4320 versions.
1267 Mon Mar 9 15:22:06 1998 Gavin Koch <gavin@cygnus.com>
1269 * mips-opc.c ("macc*","mul*"): Added the 4320 versions
1274 Fri Mar 6 11:27:53 1998 Doug Evans <devans@canuck.cygnus.com>
1276 * dvp-dis.c (print_gif): Fix length calcs for gifimage.
1277 (print_insn): Do mask comparison on proper opcode word.
1278 Print unsigned values in hex.
1279 * dvp-opc.c (u_parse_sdest): Return -1 if dest missing.
1280 (parse_bc): Catch missing dest.
1281 (parse_vfreg): Replace atoi call with strtol.
1282 (parse_{bcftreg,ffstreg,freg,ireg,vi01,gif_prim,gif_nloop}): Likewise.
1283 (parse_bcftreg,parse_ffstreg): Handle missing dest.
1284 (extract_gif_eop): New function.
1285 (gif_operands): Update eop entry.
1286 (VGIFOP,VGIFNREGS): Fix calcs.
1287 (extract_gif_prim): Set *pinvalid to 1 if prim not used.
1288 (gif_regs): Add entry for unused 11 case.
1289 (print_gif_regs): Print empty list instead of nothing.
1290 (extract_gif_nloop): Fix value calc.
1291 (print_gif_nloop): Always print value, even if 0.
1292 (insert_vif_wlcl,extract_vif_wlcl): New functions.
1293 (vif_operands): Use them for wl,cl fields.
1294 (state_vif_wl,state_vif_cl): New static locals.
1295 (parse_vif_mode): Handle numeric args.
1296 (vif_unpack_len_value,vif_unpack_len): New functions.
1297 (vif_insn_len): Call vif_unpack_len.
1300 Wed Mar 4 12:08:14 1998 Doug Evans <devans@canuck.cygnus.com>
1302 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
1304 Tue Mar 3 18:51:22 1998 Doug Evans <devans@seba.cygnus.com>
1306 * cgen-asm.in: Move insertion of generated routines to top of file.
1307 (insert_normal): Add prototype. Delete `shift' arg.
1308 * cgen-dis.in: Move insertion of generated routines to top of file.
1309 (extract_normal): Add prototype. Delete `shift' arg.
1310 (print_normal): Add prototype. Call CGEN_PRINT_NORMAL if defined.
1311 (print_keyword): Add prototype. Fix type of `attrs' arg.
1313 start-sanitize-vr4320
1314 Tue Mar 3 11:47:58 1998 Gavin Koch <gavin@cygnus.com>
1316 * mips-dis.c (_print_insn_mips) : Handle bfd_mach_mips4320.
1317 * mips-opc.c ("mac","dmac") : Added 4320 insns.
1320 Sat Feb 28 16:02:34 1998 Nick Clifton <nickc@cygnus.com>
1322 * arm-dis.c (print_insn_big_arm, print_insn_little_arm): Do not
1323 assume that info->symbols is non-empty.
1325 Sat Feb 28 12:19:05 1998 Richard Henderson <rth@cygnus.com>
1327 * alpha-opc.c (cvtqs) There is no such thing.
1328 (cvttq): Missing most of the /*d variants.
1330 start-sanitize-r5900
1331 Fri Feb 27 13:16:42 1998 Andrew Cagney <cagney@b1.cygnus.com>
1333 * mips-opc.c (r5900/madd.s): Takes three operands, not four. Fix
1335 (r5900/min.s): Incorrect opcode ....,101001 not ...110000.
1336 (r5900/msub.s): Takes three operands, not four. Fix opcode.
1339 Thu Feb 26 15:53:09 1998 Michael Meissner <meissner@cygnus.com>
1341 * d30v-opc.c (d30v_opcode_table): Indicate which instructions are
1342 delayed branches or jumps.
1345 Fri Feb 27 10:04:19 1998 Doug Evans <devans@canuck.cygnus.com>
1347 * dvp-opc.c (vif_operands): Add unpack[u] support.
1348 (vif_opcodes): Ditto.
1349 (*_vif_imrubits): Renamed from *_vif_imrbits.
1351 Wed Feb 25 00:27:44 1998 Doug Evans <devans@canuck.cygnus.com>
1353 * dvp-dis.c (print_insn): Handle word number.
1354 Handle mips address vs vu address.
1355 * dvp-opc.c (vif_operands): Use DVP_OPERAND_VU_ADDRESS.
1356 (dma_operands): Use DVP_OPERAND_MIPS_ADDRESS.
1357 ({insert,extract}_dma_addr): Fix word ofset.
1358 ({insert,print}_gif_regs): Fix encode/decode.
1361 Tue Feb 24 10:46:44 1998 Doug Evans <devans@canuck.cygnus.com>
1363 * arm-dis.c (print_insn_{big,little}_arm): info->symbol changed
1365 * mips-dis.c (print_insn_{big,little}_mips): Likewise.
1366 * tic30-dis.c (print_branch): Likewise.
1368 * mips-dis.c (print_insn_little_mips): Call dvp_info_mach_type.
1369 * dvp-dis.c (dvp_info_mach_type): New function.
1370 (print_insn_dvp): Call it.
1371 (print_vif): Return length of 4 if mpg or direct insn so following
1372 insns get properly disabled.
1373 (print_gif): Fix word order.
1374 * dvp-opc.c (vif_insn_len): New argument `pcpu'. All callers updated.
1375 (gif_operands): Fix word order.
1376 (gif_opcodes): Likewise.
1377 ({insert,extract,print}_gif_regs): Likewise.
1378 (gif_regs): Add new register number/name changes.
1379 (dma_opcodes): Add dmarefe insn.
1382 Tue Feb 24 11:06:18 1998 Nick Clifton <nickc@cygnus.com>
1384 * arm-dis.c (print_insn_big_arm, print_insn_little_arm): Remove
1385 saved_symbol code as it is no longer needed.
1387 Mon Feb 23 13:16:17 1998 Doug Evans <devans@seba.cygnus.com>
1389 * cgen-asm.c: Include symcat.h.
1390 * cgen-dis.c,cgen-opc.c,cgen-asm.in,cgen-dis.in: Ditto.
1392 * m32r-asm.c,m32r-dis.c,m32r-opc.h,m32r-opc.c: Regenerate.
1395 Mon Feb 23 09:51:39 1998 Doug Evans <devans@canuck.cygnus.com>
1397 * dvp-opc.c (extra_dma_flags): Fix typos.
1398 (dma_operands): Fix word numbers.
1399 (dma_opcodes): Likewise.
1400 ({insert,extract}_dma_flags): Likewise.
1403 Mon Feb 23 10:34:58 1998 Jeffrey A Law (law@cygnus.com)
1405 * mips-dis.c (print_insn_arg): Do not prefix 'P' arguments with '$'.
1408 Fri Feb 20 18:02:20 1998 Doug Evans <devans@canuck.cygnus.com>
1410 * dvp-dis.c (print_gif): Complete.
1411 * dvp-opc.c (gif_operands,gif_opcodes): Complete.
1412 (state_gif_{nregs,regs,nloop}): New static locals.
1413 (*_gif_*): Complete.
1414 (dvp_opcode_init_{parse,print}): Init gif state locals.
1415 (extract_vif_datalen,{insert,extract}_vif_imrbits): New functions.
1416 (vif_insn_len): Handle `unpack'.
1417 ({insert,extract}_dma_flags): Complete.
1420 start-sanitize-r5900
1421 Fri Feb 20 01:23:16 1998 Jeffrey A Law (law@cygnus.com)
1423 * mips-opc.c (mula.s): Renamed from multa.s.
1426 Thu Feb 19 16:51:13 1998 Doug Evans <devans@canuck.cygnus.com>
1428 * m32r-opc.[ch]: Regenerate.
1431 Thu Feb 19 02:11:39 1998 Doug Evans <devans@charmed.cygnus.com>
1433 * dvp-opc.c (dma_operands): Rewrite.
1434 (dma_operand_{count,addr}): New globals.
1435 (dma_opcodes): Rewrite. Add "dmaend" with no operands.
1436 (insert_dma_addr): Insert value into insn.
1437 (extract_dma_addr): Extract value from insn.
1439 Wed Feb 18 15:46:46 1998 Doug Evans <devans@canuck.cygnus.com>
1441 * dvp-dis.c (print_vu): Handle loi insns.
1442 (print_insn): Likewise.
1443 * dvp-opc.c (vu_lower_opcodes): Add "loi".
1444 (vu_operands): Make LDEST1 a FAKE operand.
1445 (parse_dest1): Allow elided argument.
1446 (print_dest1): Don't print the argument.
1448 Tue Feb 17 18:48:25 1998 Doug Evans <devans@canuck.cygnus.com>
1450 * dvp-opc.c (parse_vfreg): Dest spec is optional.
1451 (print_vfreg): Don't print dest spec.
1452 (parse_accdest): Dest spec is optional.
1453 (print_accdest): Don't print dest spec.
1456 Tue Feb 17 17:14:50 1998 Doug Evans <devans@seba.cygnus.com>
1458 * Makefile.am (CGENFILES): Update.
1459 * Makefile.in: Regenerate.
1460 * cgen-asm.in (insert_normal): Result is error message now.
1461 Validate value to be inserted.
1462 (insert_insn_normal): Result is error message now.
1463 (@arch@_cgen_assemble_insn): Update.
1464 * cgen-asm.c (cgen_parse_{signed,unsigned}_integer): Delete min,max
1465 arguments. Don't perform validation here.
1466 * m32r-asm.c,m32r-dis.c,m32r-opc.c: Regenerate.
1468 Fri Feb 13 14:26:06 1998 Doug Evans <devans@canuck.cygnus.com>
1470 * cgen-opc.in (@arch@_cgen_get_insn_operands): Handle empty
1471 operand instance list.
1472 * m32r-opc.c: Regenerate.
1474 Fri Feb 13 14:53:02 1998 Ian Lance Taylor <ian@cygnus.com>
1476 * Makefile.am (AUTOMAKE_OPTIONS): Define.
1477 * configure, Makefile.in, aclocal.m4: Rebuild with automake 1.2e.
1479 Fri Feb 13 10:21:09 1998 Mark Alexander <marka@cygnus.com>
1481 * m10300-dis.c (print_insn_mn10300): Recognize break instruction.
1483 Fri Feb 13 13:12:14 1998 Ian Lance Taylor <ian@cygnus.com>
1485 * configure.in: Get the version number from BFD.
1486 * configure: Rebuild.
1488 From H.J. Lu <hjl@gnu.org>:
1489 * Makefile.am (libopcodes_la_LDFLAGS): Define.
1490 * Makefile.in: Rebuild.
1492 Fri Feb 13 09:50:32 1998 Nick Clifton <nickc@cygnus.com>
1494 * m32r-opc.c: Regenerate.
1495 * m32r-opc.h: Regenerate.
1497 Thu Feb 12 11:01:40 1998 Doug Evans <devans@canuck.cygnus.com>
1499 * cgen-opc.in (@arch@_cgen_lookup_insn): New argument alias_p.
1500 Ignore ALIAS insns if asked to.
1501 (@arch@_cgen_get_insn_operands): Pass 0 for alias_p, NULL for insn.
1502 * m32r-opc.c: Regenerate.
1505 * dvp.opc.c: Nicely format opcode tables.
1506 (vu_operands): New element UFLAGS.
1507 (parse_uflags,print_uflags): New functions.
1508 (vu_upper_opcodes): Add UFLAGS to all insns.
1511 Thu Feb 12 03:41:00 1998 J"orn Rennecke <amylaar@cygnus.co.uk>
1513 Fix rac to accept only a0:
1514 * d10v-opc.c (d10v_predefined_registers, d10v_operands, d10v_opcodes):
1515 Split OPERAND_ACC into OPERAND_ACC0 and OPERAND_ACC1.
1516 Introduce OPERAND_GPR.
1517 * d10v-dis.c (print_operand): Likewise.
1519 Wed Feb 11 18:58:34 1998 Doug Evans <devans@seba.cygnus.com>
1521 * cgen-opc.in: New file.
1522 * cgen.sh: Translate @ARCH@. Cat cgen-opc.in into @arch@-opc.c.
1523 * Makefile.am (CGENFILES): Add cgen-opc.in.
1524 * Makefile.in: Regenerate.
1526 * cgen-opc.c (cgen_set_cpu): Delete init of hw list `next' chain.
1527 (cgen_hw_lookup): Make result const.
1529 * cgen-dis.in (*): Use PTR instead of void *.
1530 (print_insn): Delete unused vars `i', `syntax'.
1532 * m32r-opc.h, m32r-opc.c, m32r-asm.c, m32r-dis.c: Regenerate.
1535 Tue Feb 10 14:56:24 1998 Doug Evans <devans@canuck.cygnus.com>
1537 * dvp-opc.c (*): pke,gpuif renamed to vif,gif.
1538 (vif_opcodes): Update renamed insns.
1539 * dvp-dis.c (*): Likewise.
1542 Sat Feb 7 15:30:27 1998 Ian Lance Taylor <ian@cygnus.com>
1544 * configure, aclocal.m4: Rebuild with new libtool.
1546 Thu Feb 5 17:56:10 1998 Michael Meissner <meissner@cygnus.com>
1548 * d30v-opc.c (repeat{,i} instructions): Repeat/repeati
1549 instructions use a PC relative branch, not absolute.
1551 Wed Feb 4 19:17:37 1998 Ian Lance Taylor <ian@cygnus.com>
1553 * configure.in: Set libtool_enable_shared rather than
1554 libtool_shared. Remove diversion hack.
1555 * configure, Makefile.in, aclocal.m4: Rebuild with new libtool.
1557 Tue Feb 3 17:19:40 1998 Doug Evans <devans@seba.cygnus.com>
1559 * cgen-opc.c (cgen_set_cpu): Initialize hardware table.
1560 * m32r-opc.h, m32r-opc.c, m32r-asm.c, m32r-dis.c: Regenerate.
1562 Mon Feb 2 19:22:15 1998 Steve Haworth <steve@pm.cse.rmit.EDU.AU>
1564 * tic30-dis.c: New file.
1565 * disassemble.c (disassembler): Add bfd_arch_tic30 case.
1566 * configure.in: Handle bfd_tic30_arch.
1567 * Makefile.am: Rebuild dependencies.
1568 (CFILES): Add tic30-dis.c
1569 (ALL_MACHINES): Add tic30-dis.lo.
1570 * configure, Makefile.in: Rebuild.
1572 start-sanitize-m32rx
1573 Mon Feb 2 11:04:08 1998 Nick Clifton <nickc@cygnus.com>
1575 * m32r-opc.c, m32r-opc.h, m32r-asm.c m32r-dis.c: Newly generated
1576 versions after updates to m32r.cpu to remove mulwhi-a, mulwlo-a,
1577 macwhi-a and macwlo-a instructions.
1581 Fri Jan 30 17:39:21 1998 Ian Carmichael <iancarm@cygnus.com>
1583 * dvp-opc.c, fixed encoding of a bunch of instructions to
1584 be consistent with the asmvu assembler (and inconsistent
1585 with the specification).
1587 Thu Jan 29 18:14:56 1998 Ian Carmichael <iancarm@cygnus.com>
1589 * dvp-opc.c, fixed order of pkemscal/pkemscalf instructions
1590 in the opcode table. The pkemscalf instruction must come first.
1592 Thu Jan 29 16:47:24 1998 Ian Carmichael <iancarm@cygnus.com>
1594 * dvp-opc.c, MAXIi should be VUOP6(0x1d) instead of 0x2d.
1597 Thu Jan 29 13:02:56 1998 Doug Evans <devans@canuck.cygnus.com>
1599 * m32r-opc.h (HAVE_CPU_M32R): Define.
1602 Wed Jan 28 13:46:19 1998 Doug Evans <devans@canuck.cygnus.com>
1604 * dvp-dis.c, dvp-opc.c: New files.
1605 * configure.in: Compile them if bfd_dvp_arch, as well as mips.
1606 * configure: Regenerate.
1607 * Makefile.am (ALL_MACHINES): Add dvp-{dis,opc}.lo.
1608 (dvp-dis.lo,dvp-opc.lo): Add rules for.
1609 (mips-dis.lo): Compile with @archdefs@.
1610 * Makefile.in: Regenerate.
1611 * disassemble.c: Define ARCH_mips ifdef ARCH_dvp.
1612 * mips-dis.c (print_insn_little_mips): Check for DVP insns.
1615 Wed Jan 28 09:55:03 1998 Nick Clifton <nickc@cygnus.com>
1617 * v850-opc.c (insertion routines): If both alignment and size is
1618 wrong then report this.
1620 Tue Jan 27 21:52:59 1998 Jeffrey A Law (law@cygnus.com)
1622 * mips-dis.c (_print_insn_mips): Set target_processor as appropriate.
1623 Only recognize instructions for the current target_processor.
1625 Thu Jan 22 16:20:17 1998 Fred Fish <fnf@cygnus.com>
1627 * d10v-dis.c (PC_MASK): Correct value.
1628 (print_operand): If there's a reloc, don't calculate the
1629 address because they could be in different sections.
1631 start-sanitize-cygnus
1632 Thu Jan 22 16:10:32 1998 Doug Evans <devans@seba.cygnus.com>
1634 * cgen.sh: Rewrite to be like simulator's version.
1635 * Makefile.am (cgen): Update call to cgen.sh.
1636 * Makefile.in: Regenerate
1639 Fri Jan 16 15:29:11 1998 Jim Blandy <jimb@zwingli.cygnus.com>
1641 * mips-opc.c (mips_builtin_opcodes): Move 4010's "addciu"
1642 instruction after the 4650's "mul" instruction; nobody's using the
1643 4010 these days. If object files someday indicate which processor
1644 variant they're intended for, we can do a better job at this.
1646 start-sanitize-r5900
1647 Tue Jan 13 09:21:56 1998 Jeffrey A Law (law@cygnus.com)
1649 * mips-opc.c (c.lt.s): Add r5900 variant.
1653 Mon Jan 12 14:43:54 1998 Doug Evans <devans@seba.cygnus.com>
1655 * cgen-asm.c (build_asm_hash_table): Traverse compiled in table using
1656 table provided entry size. Use CGEN_INSN_MNEMONIC.
1657 (cgen_parse_keyword): Rewrite.
1658 * cgen-dis.c (build_dis_hash_table): Traverse compiled in table using
1659 table provided entry size. Use CGEN_INSN_MASK_BITSIZE.
1660 * cgen-opc.c: Clean up pass over `struct foo' usage.
1661 (cgen_keyword_lookup_value): Handle "" entry.
1662 (cgen_keyword_add): Likewise.
1663 start-sanitize-cygnus
1664 * Makefile.am: Add cgen support.
1665 * Makefile.in: Regenerate.
1666 * configure.in: Add cgen support.
1667 * configure: Regenerate.
1668 * aclocal.m4: Regenerate.
1669 * cgen.sh, cgen-asm.in, cgen-dis.in: New files.
1672 Mon Dec 22 12:37:06 1997 Ian Lance Taylor <ian@cygnus.com>
1674 * mips-opc.c: Add FP_D to s.d instruction flags.
1676 Wed Dec 17 11:38:29 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1678 * m68k-opc.c (halt, pulse): Enable them on the 68060.
1680 start-sanitize-tic80
1681 Tue Dec 16 15:22:53 1997 Fred Fish <fnf@cygnus.com>
1683 * tic80-opc.c (tic80_opcodes): Revert change that put the 32 bit
1684 PC relative offset forms before the 15 bit forms. An assembler command
1685 line option now chooses the default.
1688 start-sanitize-r5900
1689 Tue Dec 16 13:24:22 1997 Jeffrey A Law (law@cygnus.com)
1691 * mips-opc.c: Add many missing r5900 instructions.
1694 Tue Dec 16 15:22:51 1997 Michael Meissner <meissner@cygnus.com>
1696 * d30v-opc.c (d30v_opcode_table): Set new flags bits
1697 FLAG_{2WORD,MUL{16,32},ADDSUBppp}, in appropriate instructions.
1699 1997-12-15 Brendan Kehoe <brendan@lisa.cygnus.com>
1701 * configure: Only build libopcodes shared if --enable-shared's value
1702 was `yes', or was set to `*opcodes*'.
1703 * aclocal.m4: Likewise.
1704 * NOTE: this really needs to be fixed in libtool/libtool.m4, the
1705 original source of this bit of code. It's not clear what the best fix
1708 start-sanitize-r5900
1709 Mon Dec 15 12:43:36 1997 Jeffrey A Law (law@cygnus.com)
1711 * mips-opc.c (mtpc, mfpc, mtps, mfps): Add r5900 variants.
1713 start-sanitize-tic80
1714 Fri Dec 12 11:57:04 1997 Fred Fish <fnf@cygnus.com>
1716 * tic80-opc.c (OFF_SL_PC, OFF_SL_BR): Minor formatting change.
1717 (tic80_opcodes): Reorder table entries to put the 32 bit PC relative
1718 offset forms before the 15 bit forms, to default to the long forms.
1721 Fri Dec 12 01:32:30 1997 Richard Henderson <rth@cygnus.com>
1723 * alpha-opc.c (cvttq/*u*): Remove, as that suffix is invalid.
1725 Wed Dec 10 17:42:35 1997 Nick Clifton <nickc@cygnus.com>
1727 * arm-dis.c (print_insn_little_arm): Prevent examination of stored
1728 symbol if none is present.
1729 (print_insn_big_arm): Prevent examination of stored symbol if
1732 Thu Oct 23 21:13:37 1997 Fred Fish <fnf@cygnus.com>
1734 * d10v-opc.c (d10v_opcodes): Correct entry for RTE.
1736 Mon Dec 8 11:21:07 1997 Nick Clifton <nickc@cygnus.com>
1738 * disassemble.c: Remove disasm_symaddr() function.
1740 * arm-dis.c: Use info->symbol instead of info->flags to determine
1741 if disassmbly should be in Thumb or Arm mode.
1743 Tue Dec 2 09:54:27 1997 Nick Clifton <nickc@cygnus.com>
1745 * arm-dis.c: Add support for disassembling Thumb opcodes.
1746 (print_insn_thumb): New function.
1748 * disassemble.c (disasm_symaddr): New function.
1750 * arm-opc.h: Display nop pseudo ops alongside equivalent disassembly.
1751 (thumb_opcodes): Table of Thumb opcodes.
1753 Mon Dec 1 12:25:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1755 * m68k-opc.c (btst): Change Dd@s to Dd;b.
1757 * m68k-dis.c (print_insn_arg): Recognize 'm', 'n', 'o', 'p', 'q',
1758 and 'v' as operand types.
1760 Mon Dec 1 11:56:50 1997 Ian Lance Taylor <ian@cygnus.com>
1762 * m68k-opc.c: Add argument for lpstop. From Olivier Carmona
1763 <olivier.carmona@di.epfl.ch>.
1764 * m68k-dis.c (print_insn_m68k): Handle special case of lpstop,
1765 which has a two word opcode with a one word argument.
1767 Sun Nov 23 22:25:21 1997 Michael Meissner <meissner@cygnus.com>
1769 * d30v-opc.c (d30v_opcode_table, case cmpu): Immediate field is
1770 unsigned, not signed.
1771 (d30v_format_table): Add SHORT_CMPU cases for cmpu.
1773 Wed Nov 19 17:42:35 1997 Richard Henderson <rth@cygnus.com>
1775 * sh-dis.c (print_insn_shx): Recognize all sh4 additions.
1776 * sh-opc.h (fmov): Add @<REG_M>+,<DX_REG_N> variant for sh4.
1777 (ftrv): Slay the cut-and-paste monster.
1779 Tue Nov 18 23:10:03 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1781 * d10v-dis.c (print_operand):
1782 Split OPERAND_FLAG into OPERAND_FFLAG and OPERAND_CFLAG.
1784 Tue Nov 18 18:45:14 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1786 * d10v-opc.c (OPERAND_FLAG): Split into:
1787 (OPERAND_FFLAG, OPERAND_CFLAG) .
1791 Thu Nov 13 11:05:33 1997 Gavin Koch <gavin@cygnus.com>
1793 * mips-opc.c: Move the INSN_MACRO ISA value to the membership
1794 field for all INSN_MACRO's.
1795 * mips16-opc.c: same
1797 Wed Nov 12 10:16:57 1997 Gavin Koch <gavin@cygnus.com>
1799 * mips-opc.c (sync,cache): These are 3900 insns.
1801 Tue Nov 11 23:53:41 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1803 sh-opc.h (sh_table): Remove ftst/nan.
1805 start-sanitize-cygnus
1806 Mon Nov 3 13:23:15 1997 Ken Raeburn <raeburn@cygnus.com>
1808 * mips-opc.c (dror32, dror, rzu.ob): Fix bugs in encoding.
1809 (c.*.ob, mula.ob, mull.ob, muls.ob, mulsl.ob): Put 'k' version
1811 * mips-dis.c (print_insn_arg): Handle VR5400 operand types.
1815 Wed Oct 29 15:10:56 1997 Gavin Koch <gavin@cygnus.com>
1817 * mips-opc.c (deret,dmult,dmultu,madd,maddu,pref,sdbbp):
1818 Add tx49 insns and configury.
1821 Tue Oct 28 17:59:32 1997 Ken Raeburn <raeburn@cygnus.com>
1823 * mips-opc.c (ffc, ffs): Fix mask.
1825 Tue Oct 28 16:34:54 1997 Michael Meissner <meissner@cygnus.com>
1827 * d30v-opc.c (pre_defined_registers): Add eit_vb, int_s, and int_m
1830 Mon Oct 27 22:34:03 1997 Ken Raeburn <raeburn@cygnus.com>
1832 * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
1833 start-sanitize-cygnus
1834 Added VR5400 instructions.
1835 (N5): New cpu-id macro.
1837 (WR_HILO, RD_HILO, MOD_HILO): New macros.
1839 Mon Oct 27 22:34:03 1997 Ken Raeburn <raeburn@cygnus.com>
1841 * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
1842 (WR_HILO, RD_HILO, MOD_HILO): New macros.
1844 Thu Oct 23 14:57:58 1997 Nick Clifton <nickc@cygnus.com>
1846 * v850-dis.c (disassemble): Replace // with /* ... */
1848 Wed Oct 22 17:33:21 1997 Richard Henderson <rth@cygnus.com>
1850 * sparc-opc.c: Add wr & rd for v9a asr's.
1851 * sparc-dis.c (print_insn_sparc): Recognize '_' and '/' for v9a asr's.
1852 (v9a_asr_reg_names): New variable.
1853 Patch from David Miller <davem@vger.rutgers.edu>.
1855 Wed Oct 22 17:18:02 1997 Richard Henderson <rth@cygnus.com>
1857 * sparc-opc.c (v9notv9a): New insn type.
1858 (IMPDEP): Move to the end to not conflict with edge8 et al.
1859 Patch from David Miller <davem@vger.rutgers.edu>.
1861 Fri Oct 17 13:18:53 1997 Gavin Koch <gavin@cygnus.com>
1863 * mips-opc.c (bnezl,beqzl): Mark these as also tx39.
1865 Thu Oct 16 11:55:20 1997 Gavin Koch <gavin@cygnus.com>
1867 * mips-opc.c: Note that 'jalx' is (probably incorrectly) marked I1.
1869 Tue Oct 14 16:10:31 1997 Nick Clifton <nickc@cygnus.com>
1871 * v850-dis.c (disassemble): Use new symbol_at_address_func() field
1872 of disassemble_info structure to determine if an overlay address
1873 has a matching symbol in low memory.
1875 * dis-buf.c (generic_symbol_at_address): New (dummy) function for
1876 new symbol_at_address_func field in disassemble_info structure.
1878 Fri Oct 10 16:44:52 1997 Nick Clifton <nickc@cygnus.com>
1880 * v850-opc.c (extract_d22): Use signed arithmatic.
1882 Tue Oct 7 23:40:43 1997 Gavin Koch <gavin@cygnus.com>
1884 * mips-opc.c: Three op mult is not an ISA insn.
1886 Tue Oct 7 23:37:21 1997 Gavin Koch <gavin@cygnus.com>
1888 * mips-opc.c: Fix formatting.
1890 Fri Oct 3 17:26:54 1997 Ian Lance Taylor <ian@cygnus.com>
1892 * i386-dis.c (OP_E): Explicitly sign extend 8 bit values, rather
1893 than assuming that char is signed. Explicitly sign extend 16 bit
1894 values, rather than assuming that short is 16 bits.
1895 (OP_sI, OP_J, OP_DIR): Likewise.
1897 start-sanitize-v850e
1898 Thu Oct 2 13:36:45 1997 Nick Clifton <nickc@cygnus.com>
1900 * v850-dis.c (v850_sreg_names): Use symbolic names for higher
1904 Wed Oct 1 16:58:54 1997 Nick Clifton <nickc@cygnus.com>
1906 * v850-opc.c: Fix typo in comment.
1908 * v850-dis.c (disassemble): Add test of processor type when
1909 determining opcodes.
1911 Wed Oct 1 14:10:20 1997 Ian Lance Taylor <ian@cygnus.com>
1913 * configure.in: Use a diversion to set enable_shared before the
1914 arguments are parsed.
1915 * configure: Rebuild.
1917 Thu Sep 25 13:04:59 1997 Ian Lance Taylor <ian@cygnus.com>
1919 * m68k-opc.c (TBL1): Use ! rather than `.
1920 * m68k-dis.c (print_insn_arg): Remove ` operand specifier.
1922 Wed Sep 24 11:29:35 1997 Ian Lance Taylor <ian@cygnus.com>
1924 * m68k-opc.c: Correct bchg, bclr, bset, and btst on ColdFire.
1926 * m68k-opc.c: Accept tst{b,w,l} with immediate operands on cpu32.
1928 * m68k-opc.c: Correct movew of an immediate operand to %sr or %ccr
1931 * configure.in: Call AC_CHECK_TOOL before AM_PROG_LIBTOOL.
1932 * aclocal.m4: Rebuild with new libtool.
1933 * configure: Rebuild.
1935 start-sanitize-v850e
1936 Fri Sep 19 11:45:49 1997 Andrew Cagney <cagney@b1.cygnus.com>
1938 * v850-opc.c ("cmov"): Order reg param r1, r2 not r2, r2.
1941 Thu Sep 18 11:21:43 1997 Doug Evans <dje@canuck.cygnus.com>
1943 * sparc-opc.c (sparclet_cpreg_table): Add %ccsr2, %cccrr, %ccrstr.
1945 Tue Sep 16 15:18:20 1997 Nick Clifton <nickc@cygnus.com>
1947 * v850-opc.c (v850_opcodes): Further rearrangements.
1949 Tue Sep 16 16:12:11 1997 Ken Raeburn <raeburn@cygnus.com>
1951 * d30v-opc.c (rot2h, sra2h, srl2h insns): Revert last change.
1953 Tue Sep 16 09:48:50 1997 Nick Clifton <nickc@cygnus.com>
1955 * v850-opc.c (v850_opcodes): Fields reordered to allow assembler
1958 Tue Sep 16 10:01:00 1997 Gavin Koch <gavin@cygnus.com>
1960 * mips-opc.c: Added tx39 insns sdbbp, rfe, and deret.
1962 * mips16-opc.c: Added mips16 sdbbp.
1965 Mon Sep 15 18:31:52 1997 Nick Clifton <nickc@cygnus.com>
1967 * v850-opc.c: Initialise processors field of v850_opcode structure.
1969 Wed Aug 27 21:42:39 1997 Ken Raeburn <raeburn@cygnus.com>
1971 Merge changes from Martin Hunt:
1973 * d30v-opc.c: Change mvfacc to accept 6-bit unsigned values.
1975 * d30v-opc.c (pre_defined_registers): Add control registers from 0-63.
1976 (d30v_opcode_tabel): Add dbt, rtd, srah, and srlh instructions. Fix
1977 rot2h, sra2h, and srl2h to use new SHORT_A5S format.
1979 * d30v-dis.c (print_insn): Fix disassembly of SHORT_D2 opcodes.
1981 * d30v-dis.c (print_insn): First operand of d*i (delayed
1982 branch) instructions is relative.
1984 * d30v-opc.c (d30v_opcode_table): Change form for repeati.
1985 (d30v_operand_table): Add IMM6S3 type.
1986 (d30v_format_table): Change SHORT_D2. Add LONG_Db.
1988 * d30v-dis.c: Fix bug with ".s" and ".l" extensions
1989 and cmp instructions.
1991 * d30v-opc.c: Correct entries for repeat*, and sat*.
1992 Make IMM5 unsigned. Create IMM6U and IMM12S3U operand
1993 types. Correct several formats.
1995 * d30v-opc.c: (pre_defined_registers): Add dpsw and dpc.
1997 * d30v-opc.c (pre_defined_registers): Change control registers.
1999 * d30v-opc.c (d30v_format_table): Correct SHORT_C1 and
2000 SHORT_C2. Manual was incorrect.
2002 * d30v-dis.c (lookup_opcode): Return value now indicates
2003 if an opcode has a short and a long form. Used for deciding
2004 to append a ".s" or ".l".
2005 (print_insn): Append a ".s" to an instruction if it is
2006 the short form and ".l" if it is a long form. Do not append
2007 anything if the instruction has only one possible size.
2009 * d30v-opc.c: Change mulx2h to require an even register.
2010 New form: SHORT_A2; a SHORT_A form that needs an even
2011 register as the first operand.
2013 * d30v-dis.c (print_insn_d30v): Fix problem where the last
2014 instruction was not being disassembled if there were an odd
2015 number of instructions.
2017 * d30v-opc.c (SHORT_M2, LONG_M2): Two new forms.
2019 start-sanitize-v850e
2020 Fri Sep 12 11:43:54 1997 Nick Clifton <nickc@cygnus.com>
2022 * v850-dis.c (disassemble): Improved display of register lists.
2025 Thu Sep 11 17:35:10 1997 Doug Evans <dje@canuck.cygnus.com>
2027 * sparc-opc.c (sparc_opcodes): Fix assembler args to
2028 fzeros, fones, fsrc1, fsrc1s, fsrc2s, fnot1, fnot1s, fnot2s,
2029 fors, fnors, fands, fnands, fxors, fxnors, fornot1s, fornot2s,
2030 fandnot1s, fandnot2s.
2032 Tue Sep 9 10:03:49 1997 Doug Evans <dje@canuck.cygnus.com>
2034 * sparc-opc.c (sparc_opcodes): Fix op3 field for fcmpq/fcmpeq.
2036 Mon Sep 8 14:06:59 1997 Doug Evans <dje@canuck.cygnus.com>
2038 * cgen-asm.c (cgen_parse_address): New argument resultp.
2039 All callers updated.
2040 * m32r-asm.c (parse_h_hi16): Right shift numbers by 16.
2042 Tue Sep 2 18:39:08 1997 Jeffrey A Law (law@cygnus.com)
2044 * mn10200-dis.c (disassemble): PC relative instructions are
2045 relative to the next instruction, not the current instruction.
2047 Tue Sep 2 15:41:55 1997 Nick Clifton <nickc@cygnus.com>
2049 * v850-dis.c (disassemble): Only signed extend values that are not
2050 returned by extract functions.
2051 Remove use of V850_OPERAND_ADJUST_SHORT_MEMORY flag.
2053 Tue Sep 2 15:39:40 1997 Nick Clifton <nickc@cygnus.com>
2055 * v850-opc.c: Update comments. Remove use of
2056 V850_OPERAND_ADJUST_SHORT_MEMORY. Fix several operand patterns.
2058 Tue Aug 26 09:42:28 1997 Nick Clifton <nickc@cygnus.com>
2060 * v850-opc.c (MOVHI): Immediate parameter is unsigned.
2062 Mon Aug 25 15:58:07 1997 Christopher Provenzano <proven@cygnus.com>
2064 * configure: Rebuilt with latest devo autoconf for NT support.
2066 Fri Aug 22 10:35:15 1997 Nick Clifton <nickc@cygnus.com>
2068 * v850-dis.c (disassemble): Use curly brace syntax for register
2071 * v850-opc.c (v850_opcodes[]): Add NOT_R0 flag to decect cases
2072 where r0 is being used as a destination register.
2074 start-sanitize-v850e
2075 Thu Aug 21 11:09:09 1997 Nick Clifton <nickc@cygnus.com>
2077 * v850-opc.c (v850_opcodes[]): Move divh opcodes next to each other.
2080 Wed Aug 20 00:43:11 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
2082 * sh-opc.h (sh_arg_type): Add A_SGR and A_DBR.
2083 (sh_nibble_type, sh_arg_type): Add SH4 floating point extensions.
2084 (sh_table): Likewise. Add movca.l, ocbi, ocbp, ocbwb.
2085 Add insns to access SGR and DBR.
2086 * sh-dis.c (print_insn_shx): Add SH4 floating point extensions.
2088 Tue Aug 19 10:59:59 1997 Richard Henderson <rth@cygnus.com>
2090 * alpha-opc.c (alpha_opcodes): Fix hw_rei_stall mungage.
2092 start-sanitize-v850e
2093 Mon Aug 18 11:10:03 1997 Nick Clifton <nickc@cygnus.com>
2095 * v850-opc.c (v850_opcodes[]): Remove use of flag field.
2096 * v850-opc.c (v850_opcodes[]): Add support for reversed short load
2099 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
2101 * configure (cgen_files): Add support for v850e target.
2102 * configure.in (cgen_files): Add support for v850e target.
2104 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
2106 * configure (cgen_files): Add support for v850ea target.
2107 * configure.in (cgen_files): Add support for v850ea target.
2110 Fri Aug 15 05:17:48 1997 Doug Evans <dje@canuck.cygnus.com>
2112 * configure.in (bfd_arc_arch): Add.
2113 * configure: Rebuild.
2114 * Makefile.am (ALL_MACHINES): Add arc-dis.lo, arc-opc.lo.
2115 * Makefile.in: Rebuild.
2116 * arc-dis.c, arc-opc.c: New files.
2117 * disassemble.c (ARCH_all): Define ARCH_arc.
2118 (disassembler): Add ARC support.
2120 Wed Aug 13 18:52:11 1997 Nick Clifton <nickc@cygnus.com>
2122 start-sanitize-v850e
2123 * v850-dis.c (disassemble): Add support for v850EA instructions.
2125 * v850-opc.c (insert_i5div, extract_i5div): New Functions.
2126 (v850_opcodes): Add v850EA instructions.
2128 * v850-dis.c (disassemble): Add support for v850E instructions.
2130 * v850-opc.c (insert_d5_4, extract_d5_4, insert_d16_16,
2131 extract_d16_16, insert_i9, extract_i9, insert_u9, extract_u9,
2132 insert_spe, extract_spe): New Functions.
2133 (v850_opcodes): Add v850E instructions.
2136 * v850-opc.c: Reorganised and re-layed out to improve readability
2139 Tue Aug 5 23:09:31 1997 Ian Lance Taylor <ian@cygnus.com>
2141 * configure: Rebuild with autoconf 2.12.1.
2143 Mon Aug 4 12:02:16 1997 Ian Lance Taylor <ian@cygnus.com>
2145 * aclocal.m4, configure: Rebuild with new automake patches.
2147 Fri Aug 1 13:02:04 1997 Ian Lance Taylor <ian@cygnus.com>
2149 * configure.in: Set enable_shared before AM_PROG_LIBTOOL.
2150 * acinclude.m4: Just include acinclude.m4 from BFD.
2151 * aclocal.m4, configure: Rebuild.
2153 Thu Jul 31 21:44:42 1997 Ian Lance Taylor <ian@cygnus.com>
2155 * Makefile.am: New file, based on old Makefile.in.
2156 * acconfig.h: New file.
2157 * acinclude.m4: New file.
2158 * stamp-h.in: New file.
2159 * configure.in: Call AM_INIT_AUTOMAKE and AM_PROG_LIBTOOL.
2160 Removed shared library handling; now handled by libtool. Replace
2161 AC_CONFIG_HEADER with AM_CONFIG_HEADER. Call AM_MAINTAINER_MODE,
2162 AM_CYGWIN32, and AM_EXEEXT. Replace AC_PROG_INSTALL with
2163 AM_PROG_INSTALL. Change all .o files to .lo. Remove stamp-h
2164 handling in AC_OUTPUT.
2165 * dep-in.sed: Change .o to .lo.
2166 * Makefile.in: Now built with automake.
2167 * aclocal.m4: Now built with aclocal.
2168 * config.in, configure: Rebuild.
2170 Mon Jul 28 21:52:24 1997 Jeffrey A Law (law@cygnus.com)
2172 * mips-opc.c: Fix typo/thinko in "eret" instruction.
2174 start-sanitize-r5900
2175 Mon Jul 28 22:07:14 1997 Andrew Cagney <cagney@b1.cygnus.com>
2177 * mips-opc.c: Fix coding of mtsa.
2180 Thu Jul 24 13:03:26 1997 Doug Evans <dje@canuck.cygnus.com>
2182 * sparc-opc.c (sparc_opcodes): Fix spelling on fpaddX, fpsubX insns.
2184 * sparc-dis.c (sorted_opcodes): New static local.
2185 (struct opcode_hash): `opcode' is pointer to const element.
2186 (build_hash): First arg is now table of sorted pointers.
2187 (print_insn_sparc): Sort opcodes by sorting table of pointers.
2188 (compare_opcodes): Update.
2190 Tue Jul 15 12:05:23 1997 Doug Evans <dje@canuck.cygnus.com>
2192 * cgen-opc.c: #include <ctype.h>.
2193 (hash_keyword_name): New arg `case_sensitive_p'. Callers updated.
2194 Handle case insensitive hashing.
2195 (hash_keyword_value): Change type of `value' to unsigned int.
2197 Thu Jul 10 12:56:10 1997 Jeffrey A Law (law@cygnus.com)
2199 * mips-opc.c (mips_builtin_opcodes): If an insn uses single
2200 precision FP, mark it as such. Likewise for double precision
2201 FP. Mark ISA1 insns. Consolidate duplicate opcodes where
2203 start-sanitize-r5900
2204 (mips_builtin_opcodes): Remove non-existant r5900 instructions
2207 start-sanitize-r5900
2208 Thu Jun 26 16:20:27 1997 Jeffrey A Law (law@cygnus.com)
2210 * mips-opc.c (mips_builtin_opcodes): Add "pinteh", "pexeh" and
2211 "pexew" as synonyms for "pintoh", "pexoh", "pexow".
2214 Wed Jun 25 15:25:57 1997 Felix Lee <flee@cirdan.cygnus.com>
2216 * ppc-opc.c (extract_nsi): make unsigned expression signed before
2218 (UNUSED): remove one level of parens, so MSVC doesn't choke on
2219 nesting depth when all the macros are expanded.
2221 Tue Jun 17 17:02:17 1997 Ian Lance Taylor <ian@cygnus.com>
2223 * sparc-opc.c: The fcmp v9a instructions take an integer register
2224 as a destination, not a floating point register. From Christian
2225 Kuehnke <Christian.Kuehnke@arbi.Informatik.Uni-Oldenburg.DE>.
2227 Mon Jun 16 14:13:18 1997 Ian Lance Taylor <ian@cygnus.com>
2229 * m68k-dis.c (print_insn_arg): Print case 7.2 using %pc@()
2230 syntax. From Roman Hodek
2231 <rnhodek@faui22c.informatik.uni-erlangen.de>.
2233 * i386-dis.c (twobyte_has_modrm): Fix pand.
2235 Mon Jun 16 14:08:38 1997 Michael Taylor <mbt@mit.edu>
2237 * i386-dis.c (dis386_twobyte): Fix pand and pandn.
2239 Tue Jun 10 11:26:47 1997 H.J. Lu <hjl@gnu.ai.mit.edu>
2241 * arm-dis.c: Add prototypes for arm_decode_shift and
2244 Mon Jun 2 11:39:04 1997 Gavin Koch <gavin@cygnus.com>
2246 * mips-opc.c: Add r3900 insns.
2248 Tue May 27 15:55:44 1997 Ian Lance Taylor <ian@cygnus.com>
2250 * sh-dis.c (print_insn_shx): Change relmask to bfd_vma. Don't
2251 print delay slot instructions on the same line. When using a PC
2252 relative load, add a comment with the value being loaded if it can
2255 Tue May 27 11:02:08 1997 Alan Modra <alan@spri.levels.unisa.edu.au>
2257 * i386-dis.c (dis386[], dis386_twobyte[]): change pushl/popl
2258 to pushS/popS for segment regs and byte constant so that
2259 pushw/popw printed when in 16 bit data mode.
2261 * i386-dis.c (dis386[]): change cwtl, cltd to cWtS, cStd to
2262 print cbtw, cwtd in 16 bit data mode.
2263 * i386-dis.c (putop): extra case W to support above.
2265 * i386-dis.c (print_insn_x86): print addr32 prefix when given
2266 address size prefix in 16 bit address mode.
2268 Fri May 23 16:47:23 1997 Ian Lance Taylor <ian@cygnus.com>
2270 * sh-dis.c: Reindent. Rename local variable fprintf to
2273 Thu May 22 14:06:02 1997 Doug Evans <dje@canuck.cygnus.com>
2275 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Undo patch of May 2.
2277 Tue May 20 11:26:27 1997 Gavin Koch <gavin@cygnus.com>
2279 * mips-opc.c (mips_builtin_opcodes): Moved INSN_ISA field into new
2281 * mips16-opc.c (mip16_opcodes): same.
2283 Mon May 12 15:10:53 1997 Jim Wilson <wilson@cygnus.com>
2285 * m68k-opc.c (moveb): Change $d to %d.
2287 Mon May 5 14:28:41 1997 Ian Lance Taylor <ian@cygnus.com>
2289 * i386-dis.c: (dis386_twobyte): Add MMX instructions.
2290 (twobyte_has_modrm): Likewise.
2292 (OP_MMX, OP_EM, OP_MS): New static functions.
2294 * i386-dis.c: Revert patch of April 4. The output now matches
2297 Fri May 2 12:48:37 1997 Doug Evans <dje@canuck.cygnus.com>
2299 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Use $uimm16 instead
2302 Thu May 1 15:34:15 1997 Doug Evans <dje@canuck.cygnus.com>
2304 * m32r-opc.h (CGEN_ARCH): Renamed from CGEN_CPU.
2306 Tue Apr 15 12:40:08 1997 Ian Lance Taylor <ian@cygnus.com>
2308 * Makefile.in (install): Depend upon installdirs.
2309 (installdirs): New target.
2311 Mon Apr 14 12:13:51 1997 Ian Lance Taylor <ian@cygnus.com>
2313 From Thomas Graichen <graichen@rzpd.de>:
2314 * configure.in: Use ${CONFIG_SHELL} when running $ac_config_sub.
2315 * configure: Rebuild.
2317 Sun Apr 13 17:50:41 1997 Doug Evans <dje@canuck.cygnus.com>
2319 * cgen-*.c, m32r-*.c: #include sysdep.h instead of config.h.
2320 Delete string{,s}.h support.
2322 Thu Apr 10 14:44:56 1997 Doug Evans <dje@canuck.cygnus.com>
2324 * cgen-asm.c (cgen_parse_operand_fn): New global.
2325 (cgen_parse_{{,un}signed_integer,address}): Update call to
2326 cgen_parse_operand_fn.
2327 (cgen_init_parse_operand): New function.
2328 * m32r-asm.c (parse_insn_normal): cgen_init_parse_operand renamed
2329 from cgen_asm_init_parse.
2330 (m32r_cgen_assemble_insn): New operand `errmsg'.
2331 Delete call to as_bad, return error message to caller.
2332 (m32r_cgen_asm_hash_keywords): #if 0 out.
2334 Wed Apr 9 12:05:25 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2336 * m68k-dis.c (print_insn_arg) [case 'd']: Print as address register,
2338 [case 'J']: Fix typo in register name.
2340 Mon Apr 7 16:48:22 1997 Ian Lance Taylor <ian@cygnus.com>
2342 * configure.in: Substitute SHLIB_LIBS.
2343 * configure: Rebuild.
2344 * Makefile.in (SHLIB_LIBS): New variable.
2345 ($(SHLIB)): Use $(SHLIB_LIBS).
2347 Mon Apr 7 11:45:44 1997 Doug Evans <dje@canuck.cygnus.com>
2349 * cgen-dis.c (build_dis_hash_table): Fix xmalloc size computation.
2351 * cgen-opc.c (hash_keyword_name): Improve algorithm.
2353 * disassemble.c (disassembler): Handle m32r.
2355 Fri Apr 4 12:29:38 1997 Doug Evans <dje@canuck.cygnus.com>
2357 * m32r-asm.c, m32r-dis.c, m32r-opc.c, m32r-opc.h: New files.
2358 * cgen-asm.c, cgen-dis.c, cgen-opc.c: New files.
2359 * Makefile.in (CFILES): Add them.
2360 (ALL_MACHINES): Add them.
2361 (dependencies): Regenerate.
2362 * configure.in (cgen_files): New variable.
2363 (bfd_m32r_arch): Add entry.
2364 * configure: Regenerate.
2366 Fri Apr 4 14:04:16 1997 Ian Lance Taylor <ian@cygnus.com>
2368 * configure.in: Correct file names for bfd_mn10[23]00_arch.
2369 * configure: Rebuild.
2371 * Makefile.in: Rebuild dependencies.
2373 * d10v-dis.c: Include "ansidecl.h" before "opcode/d10v.h".
2375 * i386-dis.c (float_reg): Swap fsubrp and fsubp. Swap fdivrp and
2378 Thu Apr 3 13:22:45 1997 Ian Lance Taylor <ian@cygnus.com>
2380 * Branched binutils 2.8.
2382 Wed Apr 2 12:23:53 1997 Ian Lance Taylor <ian@cygnus.com>
2384 * m10200-dis.c: Rename from mn10200-dis.c.
2385 * m10200-opc.c: Rename from mn10200-opc.c.
2386 * m10300-dis.c: Rename from mn10300-dis.c
2387 * m10300-opc.c: Rename from mn10300-opc.c.
2388 * Makefile.in: Update accordingly.
2390 * mips16-opc.c: Add mul and dmul macros.
2392 Tue Apr 1 16:27:45 1997 Klaus Kaempf <kkaempf@progis.de>
2394 * makefile.vms: Update CFLAGS, add clean target.
2396 Fri Mar 28 12:10:09 1997 Ian Lance Taylor <ian@cygnus.com>
2398 * mips-opc.c: Add "wait". From Ralf Baechle
2399 <ralf@gnu.ai.mit.edu>.
2401 * configure.in: Add stdlib.h to AC_CHECK_HEADERS list.
2402 * configure, config.in: Rebuild.
2403 * sysdep.h: Include <stdlib.h> if it exists.
2404 * sparc-dis.c: Include <stdio.h> and "sysdep.h". Don't include
2406 * Makefile.in: Rebuild dependencies.
2408 Thu Mar 27 14:24:43 1997 Ian Lance Taylor <ian@cygnus.com>
2410 * ppc-opc.c: Add PPC 403 instructions and extended opcodes. From
2411 Andrew Bray <andy@madhouse.demon.co.uk>.
2413 * mips-opc.c: Add cast when setting mips_opcodes.
2415 Tue Mar 25 23:04:00 1997 Stu Grossman (grossman@critters.cygnus.com)
2417 * v850-dis.c (disassemble): Fix sign extension problem.
2418 * v850-opc.c (extract_d*): Fix sign extension problems to make
2419 disassembly calculate branch offsets correctly.
2421 Mon Mar 24 13:22:13 1997 Ian Lance Taylor <ian@cygnus.com>
2423 * sh-opc.h: Add bf/s and bt/s as synonyms for bf.s and bt.s.
2425 * mips-opc.c: Add dctr and dctw.
2427 Sun Mar 23 18:08:10 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2429 * d30v-dis.c (print_insn): Change the way signed constants
2432 Fri Mar 21 14:37:52 1997 Ian Lance Taylor <ian@cygnus.com>
2434 * Makefile.in (BFD_H): New variable.
2435 (HFILES): New variable.
2436 (CFILES): Add all C files.
2437 (.dep, .dep1, dep.sed, dep, dep-in): New targets.
2438 Delete old dependencies, and build new ones.
2439 * dep-in.sed: New file.
2441 Thu Mar 20 19:03:30 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
2443 * m68k-opc.c (m68k_opcode_aliases): Added blo and blo{s,b,w,l}.
2445 start-sanitize-coldfire
2446 Wed Mar 19 06:53:58 1997 J.T. Conklin <jtc@rtl.cygnus.com>
2448 * m68k-opc.c (m68k_opcodes): Provide coldfire division module
2451 end-sanitize-coldfire
2452 Tue Mar 18 14:17:03 1997 Jeffrey A Law (law@cygnus.com)
2454 * mn10200-opc.c: Change "trap" to "syscall".
2455 * mn10300-opc.c: Add new "syscall" instruction.
2457 Mon Mar 17 08:48:03 1997 J.T. Conklin <jtc@beauty.cygnus.com>
2459 * m68k-opc.c (m68k_opcodes): Provide correct entries for mulsl and
2460 mulul insns on the coldfire.
2462 Sat Mar 15 17:13:05 1997 Ian Lance Taylor <ian@cygnus.com>
2464 * arm-dis.c (print_insn_arm): Don't print instruction bytes.
2465 (print_insn_big_arm): Set bytes_per_chunk and display_endian.
2466 (print_insn_little_arm): Likewise.
2468 Fri Mar 14 15:08:59 1997 Ian Lance Taylor <ian@cygnus.com>
2470 Based on patches from H.J. Lu <hjl@lucon.org>:
2471 * i386-dis.c (fetch_data): Add prototype.
2472 * m68k-dis.c (fetch_data): Add prototype.
2473 (dummy_print_address): Add prototype. Make static.
2474 * ppc-opc.c (valid_bo): Add prototype.
2475 * sparc-dis.c (build_hash_table): Add prototype.
2476 (is_delayed_branch, compute_arch_mask): Add prototypes.
2477 (print_insn_sparc): Make several local variables const.
2478 (compare_opcodes): Change arguments to const PTR. Add prototype.
2479 * sparc-opc.c (arg): Change name field to be const.
2480 (lookup_name, lookup_value): Add prototypes. Change table and
2481 name parameters to be const.
2482 (sparc_encode_asi): Change name parameter to be const.
2483 (sparc_encode_membar, sparc_encode_prefetch): Likewise.
2484 (sparc_encode_sparclet_cpreg): Likewise.
2485 (sparc_decode_asi): Change return type to be const.
2486 (sparc_decode_membar, sparc_decode_prefetch): Likewise.
2487 (sparc_decode_sparclet_cpreg): Likewise.
2489 Fri Mar 7 10:51:49 1997 Ian Lance Taylor <ian@cygnus.com>
2491 * Makefile.in ($(SHLINK)): Just use ln -s, not ln -sf, since
2492 Solaris doesn't like the combined options, and the -f is
2494 (stamp-tshlink, install): Likewise.
2496 Thu Mar 6 16:51:11 1997 Jeffrey A Law (law@cygnus.com)
2498 * mn10300-opc.c (IMM16_PCREL, SD8N_PCREL, D16_SHIFT): Mark these
2501 Tue Mar 4 06:10:36 1997 J.T. Conklin <jtc@cygnus.com>
2503 * m68k-opc.c (m68k_opcodes): Fix last change for the mc68010.
2505 Mon Mar 3 07:45:20 1997 J.T. Conklin <jtc@cygnus.com>
2507 * m68k-opc.c (m68k_opcodes): Added entries for the tst insns on
2510 Thu Feb 27 14:04:32 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
2512 * m68k-opc.c (m68k_opcodes): Added swbegl pseudo-instruction.
2514 start-sanitize-tic80
2515 Thu Feb 27 11:36:41 1997 Michael Meissner <meissner@cygnus.com>
2517 * tic80-dis.c (print_insn_tic80): Set info->bytes_per_line to 8.
2519 Wed Feb 26 15:34:48 1997 Michael Meissner <meissner@cygnus.com>
2521 * tic80-opc.c (tic80_predefined_symbols): Define r25 properly.
2524 Wed Feb 26 13:38:30 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2526 * m68k-dis.c (NEXTSINGLE, NEXTDOUBLE, NEXTEXTEND): Use
2527 floatformat_to_double to make portable.
2528 (print_insn_arg): Use NEXTEXTEND macro when extracting extended
2531 Mon Feb 24 19:26:12 1997 Dawn Perchik <dawn@cygnus.com>
2533 * mips-opc.c: Initialize mips_opcodes to mips_builtin_opcodes,
2534 and bfd_mips_num_opcodes to bfd_mips_num_builtin_opcodes.
2536 Mon Feb 24 15:19:01 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2538 * d10v-dis.c, d10v-opc.c: Change pre_defined_registers to
2539 d10v_predefined_registers and reg_name_cnt to d10v_reg_name_cnt.
2541 start-sanitize-tic80
2542 Mon Feb 24 14:33:26 1997 Fred Fish <fnf@cygnus.com>
2544 * tic80-opc.c (LSI_SCALED): Renamed from this ...
2545 (OFF_SL_BR_SCALED): ... to this, and added the flag
2546 TIC80_OPERAND_BASEREL to the flags word.
2547 (tic80_opcodes): Replace all occurances of LSI_SCALED with
2551 Sat Feb 22 21:25:00 1997 Dawn Perchik <dawn@cygnus.com>
2553 * mips-opc.c: Add macros for cop0, cop1 cop2 and cop3.
2554 Change mips_opcodes from const array to a pointer,
2555 and change bfd_mips_num_opcodes from const int to int,
2556 so that we can increase the size of the mips opcodes table
2559 start-sanitize-tic80
2560 Sat Feb 22 21:03:47 1997 Fred Fish <fnf@cygnus.com>
2562 * tic80-opc.c (tic80_predefined_symbols): Revert change to
2563 store BITNUM values in the table in one's complement form
2564 to match behavior when assembler is given a raw numeric
2565 value for a BITNUM operand.
2566 * tic80-dis.c (print_operand_bitnum): Ditto.
2569 Fri Feb 21 16:31:18 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2571 * d30v-opc.c: Removed references to FLAG_X.
2573 Wed Feb 19 14:51:20 1997 Ian Lance Taylor <ian@cygnus.com>
2575 * Makefile.in: Add dependencies on ../bfd/bfd.h as required.
2577 Tue Feb 18 17:43:43 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2579 * Makefile.in: Added d30v object files.
2580 * configure: (bfd_d30v_arch) Rebuilt.
2581 * configure.in: (bfd_d30v_arch) Added new case.
2582 * d30v-dis.c: New file.
2583 * d30v-opc.c: New file.
2584 * disassemble.c (disassembler) Add entry for d30v.
2586 start-sanitize-tic80
2587 Tue Feb 18 16:32:08 1997 Fred Fish <fnf@cygnus.com>
2589 * tic80-opc.c (tic80_predefined_symbols): Add symbolic
2590 representations for the floating point BITNUM values.
2592 Fri Feb 14 12:14:05 1997 Fred Fish <fnf@cygnus.com>
2594 * tic80-opc.c (tic80_predefined_symbols): Store BITNUM values
2595 in the table in one's complement form, as they appear in the
2597 (tic80_symbol_to_value): Use macros to access predefined
2599 (tic80_value_to_symbol): Ditto.
2600 (tic80_next_predefined_symbol): New function.
2601 * tic80-dis.c (print_operand_bitnum): Remove code that did
2602 one's complement for BITNUM values.
2605 start-sanitize-r5900
2606 Fri Feb 14 13:56:51 1997 Gavin Koch <gavin@cygnus.com>
2608 * mips-opc.c: bug fix, can't mark insns INSN_5900 and INSN_ISA4
2611 Thu Feb 13 21:56:51 1997 Klaus Kaempf <kkaempf@progis.de>
2613 * makefile.vms: Remove 8 bit characters. Update to latest
2616 Thu Feb 13 20:41:22 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
2618 * m68k-opc.c (m68k_opcodes): Add swbeg pseudo-instruction.
2620 Thu Feb 13 16:30:02 1997 Jeffrey A Law (law@cygnus.com)
2622 * mn10200-opc.c (IMM16_PCREL): This is a signed operand.
2623 (IMM24_PCREL): Likewise.
2625 Thu Feb 13 13:28:43 1997 Ian Lance Taylor <ian@cygnus.com>
2627 * mips-dis.c (print_mips16_insn_arg): Use memaddr - 2 as the base
2628 address for an extended PC relative instruction that is not a
2631 Wed Feb 12 12:27:40 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2633 * m68k-dis.c (print_insn_m68k): Set bytes_per_chunk and
2636 start-sanitize-tic80
2637 Tue Feb 11 16:36:31 1997 Fred Fish <fnf@cygnus.com>
2639 * tic80-opc.c (tic80_operands): Fix typo '+' -> '|'.
2640 (tic80_opcodes): Sort entries so that long immediate forms
2641 come after short immediate forms, making it easier for
2642 assembler to select the right one for a given operand.
2645 Tue Feb 11 15:26:47 1997 Ian Lance Taylor <ian@cygnus.com>
2647 * mips-dis.c (_print_insn_mips): Set bytes_per_chunk and
2649 (print_insn_mips16): Likewise.
2651 start-sanitize-r5900
2652 Fri Feb 7 11:12:44 1997 Gavin Koch <gavin@cygnus.com>
2654 * mips-opc.c: add r5900.
2657 start-sanitize-tic80
2658 Mon Feb 10 10:12:41 1997 Fred Fish <fnf@cygnus.com>
2660 * tic80-opc.c (tic80_symbol_to_value): Changed to accept
2661 a symbol class that restricts translation to just that
2662 class (general register, condition code, etc).
2664 Thu Feb 6 17:34:09 1997 Fred Fish <fnf@cygnus.com>
2666 * tic80-opc.c (tic80_operands): Add REG_0_E, REG_22_E,
2667 and REG_DEST_E for register operands that have to be
2668 an even numbered register. Add REG_FPA for operands that
2669 are one of the floating point accumulator registers.
2670 Add TIC80_OPERAND_MASK to flags for ENDMASK operand.
2671 (tic80_opcodes): Change entries that need even numbered
2672 register operands to use the new operand table entries.
2673 Add "or" entries that are identical to "or.tt" entries.
2676 Wed Feb 5 11:12:44 1997 Ian Lance Taylor <ian@cygnus.com>
2678 * mips16-opc.c: Add new cases of exit instruction for
2680 * mips-dis.c (print_mips16_insn_arg): Display floating point
2681 registers in operands of exit instruction. Print `$' before
2682 register names in operands of entry and exit instructions.
2684 start-sanitize-tic80
2685 Thu Jan 30 14:09:03 1997 Fred Fish <fnf@cygnus.com>
2687 * tic80-opc.c (tic80_predefined_symbols): Table of name/value
2688 pairs for all predefined symbols recognized by the assembler.
2689 Also used by the disassembling routines.
2690 (tic80_symbol_to_value): New function.
2691 (tic80_value_to_symbol): New function.
2692 * tic80-dis.c (print_operand_control_register,
2693 print_operand_condition_code, print_operand_bitnum):
2694 Remove private tables and use tic80_value_to_symbol function.
2697 Thu Jan 30 11:30:45 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2699 * d10v-dis.c (print_operand): Change address printing
2700 to correctly handle PC wrapping. Fixes PR11490.
2702 Wed Jan 29 09:39:17 1997 Jeffrey A Law (law@cygnus.com)
2704 * mn10200-opc.c (mn10200_operands): Make 8 and 16 bit pc-relative
2707 Tue Jan 28 15:57:34 1997 Ian Lance Taylor <ian@cygnus.com>
2709 * mips-dis.c (print_insn_mips16): Set insn_info information.
2710 (print_mips16_insn_arg): Likewise.
2712 * mips-dis.c (print_insn_mips16): Better handling of an extend
2713 opcode followed by an instruction which can not be extended.
2715 Fri Jan 24 12:08:21 1997 J.T. Conklin <jtc@cygnus.com>
2717 * m68k-opc.c (m68k_opcodes): Changed operand specifier for the
2718 coldfire moveb instruction to not allow an address register as
2719 destination. Although the documentation does not indicate that
2720 this is invalid, experiments uncovered unexpected behavior.
2721 Added a comment explaining the situation. Thanks to Andreas
2722 Schwab for pointing this out to me.
2724 start-sanitize-tic80
2725 Wed Jan 22 20:13:51 1997 Fred Fish <fnf@cygnus.com>
2727 * tic80-opc.c (tic80_opcodes): Expand comment to note that the
2728 entries are presorted so that entries with the same mnemonic are
2729 adjacent to each other in the table. Sort the entries for each
2730 instruction so that this is true.
2733 Mon Jan 20 12:48:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2735 * m68k-dis.c: Include <libiberty.h>.
2736 (print_insn_m68k): Sort the opcode table on the most significant
2737 nibble of the opcode.
2739 start-sanitize-tic80
2740 Sat Jan 18 15:15:05 1997 Fred Fish <fnf@cygnus.com>
2742 * tic80-dis.c (tic80_opcodes): Add "wrcr", "vmpy", "vrnd",
2743 "vsub", "vst", "xnor", and "xor" instructions.
2744 (V_a1): Renamed from V_a, msb of accumulator reg number.
2745 (V_a0): Add macro, lsb of accumulator reg number.
2747 Fri Jan 17 18:24:31 1997 Fred Fish <fnf@cygnus.com>
2749 * tic80-dis.c (print_insn_tic80): Broke excessively long
2750 function up into several smaller ones and arranged for
2751 the instruction printing function to be callable recursively
2752 to print vector instructions that have both a load and a
2753 math instruction packed into a single opcode.
2754 * tic80-opc.c (tic80_opcodes): Expand comment for vld opcode
2755 to explain why it comes after the other vector opcodes.
2758 Fri Jan 17 16:19:15 1997 J.T. Conklin <jtc@beauty.cygnus.com>
2760 * m68k-opc.c (m68k_opcodes): add b, w, or l specifier to coldfire
2761 move insns to handle immediate operands.
2763 Thu Jan 17 16:19:00 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2765 * m68k-opc.c (m68k_opcodes): Delete duplicate entry for "cmpil".
2766 fix operand mask in the "moveml" entries for the coldfire.
2768 start-sanitize-tic80
2769 Thu Jan 16 20:54:40 1997 Fred Fish <fnf@cygnus.com>
2771 * tic80-opc.c (V_a, V_m, V_S, V_Z, V_p, OP_V, MASK_V):
2772 New macros for building vector instruction opcodes.
2773 (tic80_opcodes): Remove all uses of FMT_SI, FMT_REG, and
2774 FMT_LI, which were unused. The field is now a flags field.
2775 Remove some opcodes that are possible, but illegal, such
2776 as long immediate instructions with doubles for immediate
2777 values. Add "vadd" and "vld" instructions.
2779 Wed Jan 15 18:59:51 1997 Fred Fish <fnf@cygnus.com>
2781 * tic80-opc.c (tic80_operands): Reorder some table entries to make
2782 the order more logical. Move the shift alias instructions ("rotl",
2783 "shl", "ins", "rotr", "extu", "exts", "srl", and "sra" to be
2784 interspersed with the regular sr.x and sl.x instructions. Add
2785 and test new instruction opcodes for "sl", "sli", "sr", "sri", "st",
2786 "sub", "subu", "swcr", and "trap".
2788 Tue Jan 14 19:42:50 1997 Fred Fish <fnf@cygnus.com>
2790 * tic80-opc.c (OFF_SS_PC): Renamed from OFF_SS.
2791 (OFF_SL_PC): Renamed from OFF_SL.
2792 (OFF_SS_BR): New operand type for base relative operand.
2793 (OFF_SL_BR): New operand type for base relative operand.
2794 (REG_BASE): New operand type for base register operand.
2795 (tic80_opcodes): Add and test "fmpy", "frndm", "frndn", "frndp",
2796 "frndz", "fsqrt", "fsub", "illop0", "illopF", "ins", "jsr",
2797 "ld", "ld.u", "lmo", "or", "rdcr", "rmo", "rotl", and "rotr"
2799 * tic80-dis.c (print_insn_tic80): Print opcode name with fixed width
2800 10 char field, padded with spaces on rhs, rather than a string
2801 followed by a tab. Use renamed TIC80_OPERAND_PCREL flag bit rather
2802 than old TIC80_OPERAND_RELATIVE. Add support for new
2803 TIC80_OPERAND_BASEREL flag bit.
2805 Mon Jan 13 15:58:56 1997 Fred Fish <fnf@cygnus.com>
2807 * tic80-dis.c (print_insn_tic80): Print floating point operands
2809 * tic80-opc.c (SPFI): Add single precision floating point
2810 immediate operand type.
2811 (ROTATE): Add rotate operand type for shifts.
2812 (ENDMASK): Add for shifts.
2813 (n): Macro for the 'n' bit.
2814 (i): Macro for the 'i' bit.
2815 (PD): Macro for the 'PD' field.
2816 (P2): Macro for the 'P2' field.
2817 (P1): Macro for the 'P1' field.
2818 (tic80_opcodes): Add entries for "exts", "extu", "fadd",
2822 Mon Jan 6 15:06:55 1997 Jeffrey A Law (law@cygnus.com)
2824 * mn10200-dis.c (disassemble): Mask off unwanted bits after
2825 adding in current address for pc-relative operands.
2827 start-sanitize-tic80
2828 Mon Jan 6 10:56:25 1997 Fred Fish <fnf@cygnus.com>
2830 * tic80-dis.c (R_SCALED): Add macro to test for ":s" modifier bit.
2831 (print_insn_tic80): If R_SCALED then print ":s" modifier for operand.
2832 * tic80-opc.c (REG0, REG22, REG27, SSOFF, LSOFF): Names
2833 changed to REG_0, REG_22, REG_DEST, OFF_SS, OFF_SL respectively.
2834 (SICR, LICR, REGM_SI, REGM_LI): Names changed to CR_SI, CR_LI,
2835 REG_BASE_M_SI, REG_BASE_M_LI respectively.
2836 (REG_SCALED, LSI_SCALED): New operand types.
2837 (E): New macro for 'E' bit at bit 27.
2838 (tic80_opcodes): Add and test dld, dld.u, dst, estop, and etrap
2839 opcodes, including the various size flavors (b,h,w,d) for
2840 the direct load and store instructions.
2842 Sun Jan 5 12:18:14 1997 Fred Fish <fnf@cygnus.com>
2844 * tic80-dis.c (M_SI, M_LI): Add macros to test for ":m" modifier bit
2846 * tic80-dis.c (print_insn_tic80): Change comma and paren handling.
2847 Use M_SI and M_LI macros to check for ":m" modifier for GPR operands.
2848 * tic80-opc.c (tic80_operands): Add REGM_SI and REGM_LI operands.
2849 (F, M_REG, M_LI, M_SI, SZ_REG, SZ_LI, SZ_SI, D, S): New bit-twiddlers.
2850 (MASK_LI_M, MASK_SI_M, MASK_REG_M): Remove and replace in opcode
2851 masks with "MASK_* & ~M_*" to get the M bit reset.
2852 (tic80_opcodes): Add bsr, bsr.a, cmnd, cmp, dcachec, and dcachef.
2854 Sat Jan 4 19:05:05 1997 Fred Fish <fnf@cygnus.com>
2856 * tic80-dis.c (print_insn_tic80): Print TIC80_OPERAND_RELATIVE
2857 correctly. Add support for printing TIC80_OPERAND_BITNUM and
2858 TIC80_OPERAND_CC, and TIC80_OPERAND_CR operands in symbolic
2860 * tic80-opc.c (tic80_operands): Add SSOFF, LSOFF, BITNUM,
2861 CC, SICR, and LICR table entries.
2862 (tic80_opcodes): Add and test "nop", "br", "bbo", "bbz",
2863 "bcnd", and "brcr" opcodes.
2866 Fri Jan 3 18:32:11 1997 Fred Fish <fnf@cygnus.com>
2868 * ppc-opc.c (powerpc_operands): Make comment match the
2869 actual fields (no shift field).
2870 * sparc-opc.c (sparc_opcodes): Document why this cannot be "const".
2871 start-sanitize-tic80
2872 * tic80-dis.c (print_insn_tic80): Replace abort stub with a
2873 partial implementation, work in progress.
2874 * tic80-opc.c (tic80_operands): Begin construction operands table.
2875 (tic80_opcodes): Continue populating opcodes table and start
2876 filling in the operand indices.
2877 (tic80_num_opcodes): Add this.
2880 Fri Jan 3 12:13:52 1997 Ian Lance Taylor <ian@cygnus.com>
2882 * m68k-opc.c: Add #B case for moveq.
2884 Thu Jan 2 12:14:29 1997 Jeffrey A Law (law@cygnus.com)
2886 * mn10300-dis.c (disassemble): Make sure all variables are initialized
2887 before they are used.
2889 Tue Dec 31 12:20:38 1996 Jeffrey A Law (law@cygnus.com)
2891 * v850-opc.c (v850_opcodes): Put curly-braces around operands
2892 for "breakpoint" instruction.
2894 Tue Dec 31 15:38:13 1996 Ian Lance Taylor <ian@cygnus.com>
2896 * Makefile.in (ALL_CFLAGS): Add -D_GNU_SOURCE.
2897 (dep): Use ALL_CFLAGS rather than CFLAGS.
2899 Tue Dec 31 15:09:16 1996 Michael Meissner <meissner@tiktok.cygnus.com>
2901 * v850-opc.c (D8_{6,7}): Set V850_OPERAND_ADJUST_SHORT_MEMORY
2904 Mon Dec 30 17:02:11 1996 Fred Fish <fnf@cygnus.com>
2906 * Makefile.in (m68k-opc.o, alpha-opc.o): Remove dis-asm.h dependency.
2907 start-sanitize-tic80
2908 (tic80-dis.o, tic80-opc.o): Add rules per comment in Makefile.in.
2911 Mon Dec 30 11:38:01 1996 Ian Lance Taylor <ian@cygnus.com>
2913 * mips16-opc.c: Add "abs".
2915 start-sanitize-tic80
2916 Sun Dec 29 10:58:22 1996 Fred Fish <fnf@cygnus.com>
2918 * Makefile.in (ALL_MACHINES): Add tic80-dis.o and tic80-opc.o.
2919 * disassemble.c (ARCH_tic80): Define if ARCH_all is defined.
2920 (disassembler): Add bfd_arch_tic80 support to set disassemble
2921 to print_insn_tic80.
2922 * tic80-dis.c (print_insn_tic80): Add stub.
2924 Fri Dec 27 22:30:57 1996 Fred Fish <fnf@cygnus.com>
2926 * configure.in (arch in $selarchs): Add bfd_tic80_arch entry.
2927 * configure: Regenerate with autoconf.
2928 * tic80-dis.c: Add file.
2929 * tic80-opc.c: Add file.
2932 Fri Dec 20 14:30:19 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2934 * d10v-opc.c (pre_defined_registers): Add cr[0-15], dpc, dpsw, link.
2936 Mon Dec 16 13:00:15 1996 Jeffrey A Law (law@cygnus.com)
2938 * mn10200-opc.c (mn10200_operands): Add SIMM16N.
2939 (mn10200_opcodes): Use it for some logicals and btst insns.
2940 Add "break" and "trap" instructions.
2942 * mn10300-opc.c (mn10300_opcodes): Add "break" instruction.
2944 * mn10200-opc.c: Add pseudo-ops for "mov (an),am" and "mov an,(am)".
2946 Sat Dec 14 22:36:20 1996 Ian Lance Taylor <ian@cygnus.com>
2948 * mips-dis.c (print_mips16_insn_arg): The base address of a PC
2949 relative load or add now depends upon whether the instruction is
2952 Wed Dec 11 09:23:46 1996 Jeffrey A Law (law@cygnus.com)
2954 * mn10200-dis.c: Finish writing disassembler.
2955 * mn10200-opc.c (mn10200_opcodes): Fix mask for "mov imm8,dn".
2956 Fix mask for "jmp (an)".
2958 * mn10300-dis.c (disassemble, print_insn_mn10300): Corrently
2959 handle endianness issues for mn10300.
2961 * mn10200-opc.c (mn10200_opcodes): Fix operands for "movb dm,(an)".
2963 Tue Dec 10 12:08:05 1996 Jeffrey A Law (law@cygnus.com)
2965 * mn10200-opc.c (mn10200_opcodes): "mov imm8,d0" is a format 2
2966 instruction. Fix opcode field for "movb (imm24),dn".
2968 * mn10200-opc.c (mn10200_operands): Fix insertion position
2971 Mon Dec 9 16:42:43 1996 Jeffrey A Law (law@cygnus.com)
2973 * mn10200-opc.c: Create mn10200 opcode table.
2974 * mn10200-dis.c: Flesh out mn10200 disassembler. Not ready,
2975 but moving along nicely.
2977 Sun Dec 8 04:28:31 1996 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2979 * Makefile.in (ALL_MACHINES): Add mips16-opc.o.
2981 Fri Dec 6 16:47:40 1996 J.T. Conklin <jtc@rhino.cygnus.com>
2983 * m68k-opc.c (m68k_opcodes): Revert change to use < and >
2984 specifiers for fmovem* instructions.
2986 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
2988 * mn10300-dis.c (disassemble): Remove '$' register prefixing.
2990 Fri Dec 6 17:34:39 1996 Ian Lance Taylor <ian@cygnus.com>
2992 * mips16-opc.c: Change opcode for entry/exit to avoid conflicting
2995 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
2997 * mn10300-opc.c: Add some comments explaining the various
3000 * mn10300-dis.c (disassemble): Fix minor gcc -Wall warnings.
3002 Thu Dec 5 12:09:48 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3004 * m68k-dis.c (print_insn_arg): Handle new < and > operand
3007 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
3008 operand specifiers in fmovm* instructions.
3010 Wed Dec 4 14:52:18 1996 Ian Lance Taylor <ian@cygnus.com>
3012 * ppc-opc.c (insert_li): Give an error if the offset has the two
3013 least significant bits set.
3015 Wed Nov 27 13:09:01 1996 Ian Lance Taylor <ian@cygnus.com>
3017 * mips-dis.c (print_insn_mips16): Separate the instruction from
3018 the arguments with a tab, not a space.
3020 Tue Nov 26 13:24:17 1996 Jeffrey A Law (law@cygnus.com)
3022 * mn10300-dis.c (disasemble): Finish conversion to '$' as
3025 * mn10300-opc.c (mn10300_opcodes): Fix mask field for
3028 Tue Nov 26 10:53:21 1996 Ian Lance Taylor <ian@cygnus.com>
3030 * configure: Rebuild with autoconf 2.12.
3032 Add support for mips16 (16 bit MIPS implementation):
3033 * mips16-opc.c: New file.
3034 * mips-dis.c: Include "elf-bfd.h" and "elf/mips.h".
3035 (mips16_reg_names): New static array.
3036 (print_insn_big_mips): Use print_insn_mips16 in 16 bit mode or
3037 after seeing a 16 bit symbol.
3038 (print_insn_little_mips): Likewise.
3039 (print_insn_mips16): New static function.
3040 (print_mips16_insn_arg): New static function.
3041 * mips-opc.c: Add jalx instruction.
3042 * Makefile.in (mips16-opc.o): New target.
3043 * configure.in: Use mips16-opc.o for bfd_mips_arch.
3044 * configure: Rebuild.
3046 Mon Nov 25 16:15:17 1996 J.T. Conklin <jtc@cygnus.com>
3048 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
3049 operand specifiers in *save, *restore and movem* instructions.
3051 * m68k-opc.c (m68k_opcodes): Fix move and movem instructions for
3054 * m68k-opc.c (m68k_opcodes): The coldfire (mcf5200) can only use
3055 register operands for immediate arithmetic, not, neg, negx, and
3056 set according to condition instructions.
3058 * m68k-opc.c (m68k_opcodes): Consistantly Use "s" as the storage
3059 specifier of the effective-address operand in immediate forms of
3060 arithmetic instructions. The specifier for the immediate operand
3061 notes how and where the constant will be stored.
3063 Mon Nov 25 11:17:01 1996 Jeffrey A Law (law@cygnus.com)
3065 * mn10300-opc.c (mn10300_opcodes): Remove redundant "lcc"
3068 * mn10300-dis.c (disassemble): Use '$' instead of '%' for
3071 * mn10300-dis.c (disassemble): Prefix registers with '%'.
3073 Wed Nov 20 10:37:13 1996 Jeffrey A Law (law@cygnus.com)
3075 * mn10300-dis.c (disassemble): Handle register lists.
3077 * mn10300-opc.c: Fix handling of register list operand for
3078 "call", "ret", and "rets" instructions.
3080 * mn10300-dis.c (disassemble): Print PC-relative and memory
3081 addresses symbolically if possible.
3082 * mn10300-opc.c: Distinguish between absolute memory addresses,
3083 pc-relative offsets & random immediates.
3085 * mn10300-dis.c (print_insn_mn10300): Fix fetch of last byte
3087 (disassemble): Handle SPLIT and EXTENDED operands.
3089 Tue Nov 19 13:33:01 1996 Jeffrey A Law (law@cygnus.com)
3091 * mn10300-dis.c: Rough cut at printing some operands.
3093 * mn10300-dis.c: Start working on disassembler support.
3094 * mn10300-opc.c (mn10300_opcodes): Fix masks on several insns.
3096 * mn10300-opc.c (mn10300_operands): Add "REGS" for a register
3098 (mn10300_opcodes): Use REGS for register list in "movm" instructions.
3100 Mon Nov 18 15:20:35 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3102 * d10v-opc.c (d10v_opcodes): Add3 sets the carry.
3104 Fri Nov 15 13:43:19 1996 Jeffrey A Law (law@cygnus.com)
3106 * mn10300-opc.c (mn10300_opcodes): Demand parens around
3107 register argument is calls and jmp instructions.
3109 Thu Nov 7 00:26:05 1996 Jeffrey A Law (law@cygnus.com)
3111 * mn10300-opc.c (mn10300_opcodes): Use DN01 for putx and
3112 getx operand. Fix opcode for mulqu imm,dn.
3114 Wed Nov 6 13:42:32 1996 Jeffrey A Law (law@cygnus.com)
3116 * mn10300-opc.c (mn10300_operands): Hijack "bits" field
3117 in MN10300_OPERAND_SPLIT operands for how many bits
3118 appear in the basic insn word. Add IMM32_HIGH24,
3119 IMM32_HIGH24_LOWSHIFT8, IMM8E_SHIFT8.
3120 (mn10300_opcodes): Use new operands as needed.
3122 * mn10300-opc.c (mn10300_operands): Add IMM32_LOWSHIFT8
3123 for bset, bclr, btst instructions.
3124 (mn10300_opcodes): Use new IMM32_LOWSHIFT8 as needed.
3126 * mn10300-opc.c (mn10300_operands): Remove many redundant
3127 operands. Update opcode table as appropriate.
3128 (IMM32): Add MN10300_OPERAND_SPLIT flag.
3129 (mn10300_opcodes): Fix single bit error in mov imm32,dn insn.
3131 Tue Nov 5 13:26:58 1996 Jeffrey A Law (law@cygnus.com)
3133 * mn10300-opc.c (mn10300_operands): Add DN2, DM2, AN2, AM2
3134 operands (for indexed load/stores). Fix bitpos for DI
3135 operand. Add SN8N_SHIFT8, IMM8_SHIFT8, and D16_SHIFT for the
3136 few instructions that insert immediates/displacements in the
3137 middle of the instruction. Add IMM8E for 8 bit immediate in
3138 the extended part of an instruction.
3139 (mn10300_operands): Use new opcodes as appropriate.
3141 Tue Nov 5 10:30:51 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3143 * d10v-opc.c (d10v_opcodes): Declare the trap instruction
3144 sequential so the assembler never parallelizes it with
3147 Mon Nov 4 12:50:40 1996 Jeffrey A Law (law@cygnus.com)
3149 * mn10300-opc.c (mn10300_operands): Add DN01 and AN01 for
3150 a data/address register that appears in register field 0
3151 and register field 1.
3152 (mn10300_opcodes): Use DN01 and AN01 for mov/cmp imm8,DN/AN
3154 Fri Nov 1 10:29:11 1996 Richard Henderson <rth@tamu.edu>
3156 * alpha-dis.c (print_insn_alpha): Use new NOPAL mask for
3157 standard disassembly.
3159 * alpha-opc.c (alpha_operands): Rearrange flags slot.
3160 (alpha_opcodes): Add new BWX, CIX, and MAX instructions.
3161 Recategorize PALcode instructions.
3163 Wed Oct 30 16:46:58 1996 Jeffrey A Law (law@cygnus.com)
3165 * v850-opc.c (v850_opcodes): Add relaxing "jbr".
3167 Tue Oct 29 16:30:28 1996 Ian Lance Taylor <ian@cygnus.com>
3169 * mips-dis.c (_print_insn_mips): Don't print a trailing tab if
3170 there are no operand types.
3172 Tue Oct 29 12:22:21 1996 Jeffrey A Law (law@cygnus.com)
3174 * v850-opc.c (D9_RELAX): Renamed from D9, all references
3176 (v850_operands): Make sure D22 immediately follows D9_RELAX.
3178 Fri Oct 25 12:12:53 1996 Ian Lance Taylor <ian@cygnus.com>
3180 * i386-dis.c (print_insn_x86): Set info->bytes_per_line to 5.
3182 Thu Oct 24 17:53:52 1996 Jeffrey A Law (law@cygnus.com)
3184 * v850-opc.c (insert_d8_6): Fix operand insertion for sld.w
3185 and sst.w instructions.
3187 * v850-opc.c (v850_opcodes): Add "jCC" instructions (aliases for
3190 Thu Oct 24 17:21:20 1996 Ian Lance Taylor <ian@cygnus.com>
3192 * mips-dis.c (_print_insn_mips): Use a tab between the instruction
3195 Tue Oct 22 23:32:56 1996 Ian Lance Taylor <ian@cygnus.com>
3197 * ppc-opc.c (PPCPWR2): Define.
3198 (powerpc_opcodes): Use PPCPWR2 for fsqrt, rather than duplicating
3201 Fri Oct 11 16:03:49 1996 Jeffrey A Law (law@cygnus.com)
3203 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode
3204 field for movhu instruction.
3206 * v850-dis.c (disassemble): For V850_OPERAND_SIGNED operands,
3207 cast value to "long" not "signed long" to keep hpux10
3210 Thu Oct 10 10:25:58 1996 Jeffrey A Law (law@cygnus.com)
3212 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode field
3215 * mn10300-opc.c (FMT*): Remove definitions.
3217 * mn10300-opc.c (mn10300_opcodes): Fix destination register
3218 for shift-by-register opcodes.
3220 * mn10300-opc.c (mn10300_operands): Break DN, DM, AN, AM
3221 into [AD][MN][01] for encoding the position of the register
3224 Wed Oct 9 11:19:26 1996 Jeffrey A Law (law@cygnus.com)
3226 * mn10300-opc.c (mn10300_opcodes): Add "extended" instructions,
3227 "putx", "getx", "mulq", "mulqu", "sat16", "sat24", "bsch".
3229 Tue Oct 8 11:55:35 1996 Jeffrey A Law (law@cygnus.com)
3231 * mn10300-opc.c (mn10300_operands): Remove "REGS" operand.
3232 Fix various typos. Add "PAREN" operand.
3233 (MEM, MEM2): Define.
3234 (mn10300_opcodes): Surround all memory addresses with "PAREN"
3235 operands. Fix several typos.
3237 * mn10300-opc.c (mn10300_opcodes): Fix typos in yesterday's
3240 Mon Oct 7 16:48:45 1996 Jeffrey A Law (law@cygnus.com)
3242 * mn10300-opc.c (FMT_XX): Renumber starting at one.
3243 (mn10300_operands): Rough cut. Enough to parse "mov" instructions
3245 (mn10300_opcodes): Break opcode format out into its own field.
3246 Update many operand fields to deal with signed vs unsigned
3247 issues. Fix one or two typos in the "mov" instruction
3248 opcode, mask and/or operand fields.
3250 Mon Oct 7 11:39:49 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
3252 * m68k-opc.c (plusha): Prefer encoding for m68040up, in case
3253 m68851 wasn't reset.
3255 Thu Oct 3 17:17:02 1996 Ian Lance Taylor <ian@cygnus.com>
3257 * mn10300-opc.c (mn10300_opcodes): Add opcode & masks for
3258 all opcodes. Very rough cut at operands for all opcodes.
3260 * mn10300-opc.c (mn10300_opcodes): Start fleshing out the
3263 Thu Oct 3 10:06:07 1996 Jeffrey A Law (law@cygnus.com)
3265 * mn10200-opc.c, mn10300-opc.c: New files.
3266 * mn10200-dis.c, mn10300-dis.c: New files.
3267 * mn10x00-opc.c, mn10x00-dis.c: Deleted.
3268 * disassemble.c: Break mn10x00 support into 10200 and 10300
3270 * configure.in: Likewise.
3271 * configure: Rebuilt.
3273 Thu Oct 3 15:59:12 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
3275 * Makefile.in (MOSTLYCLEAN): Move config.log to distclean.
3277 Wed Oct 2 23:28:42 1996 Jeffrey A Law (law@cygnus.com)
3279 * mn10x00-opc.c, mn10x00-dis.c: New files for Matsushita
3281 * disassemble (ARCH_mn10x00): Define.
3282 (disassembler): Handle bfd_arch_mn10x00.
3283 * configure.in: Recognize bfd_mn10x00_arch.
3284 * configure: Rebuilt.
3286 Tue Oct 1 10:49:11 1996 Ian Lance Taylor <ian@cygnus.com>
3288 * i386-dis.c (op_rtn): Change to be a pointer. Adjust uses
3289 accordingly. Don't declare functions using op_rtn.
3291 Fri Sep 27 18:28:59 1996 Stu Grossman (grossman@critters.cygnus.com)
3293 * v850-dis.c (disassemble): Add memaddr argument. Re-arrange
3294 params to be more standard.
3295 * (disassemble): Print absolute addresses and symbolic names for
3296 branch and jump targets.
3297 * v850-opc.c (v850_operand): Add displacement flag to 9 and 22
3299 * (v850_opcodes): Add breakpoint insn.
3301 Mon Sep 23 12:32:26 1996 Ian Lance Taylor <ian@cygnus.com>
3303 * m68k-opc.c: Move the fmovemx data register cases before the
3304 other cases, so that they get recognized before the data register
3305 does gets treated as a degenerate register list.
3307 Tue Sep 17 12:06:51 1996 Ian Lance Taylor <ian@cygnus.com>
3309 * mips-opc.c: Add a case for "div" and "divu" with two registers
3310 and a destination of $0.
3312 Tue Sep 10 16:12:39 1996 Fred Fish <fnf@rtl.cygnus.com>
3314 * mips-dis.c (print_insn_arg): Add prototype.
3315 (_print_insn_mips): Ditto.
3317 Mon Sep 9 14:26:26 1996 Ian Lance Taylor <ian@cygnus.com>
3319 * mips-dis.c (print_insn_arg): Print condition code registers as
3322 Tue Sep 3 12:09:46 1996 Doug Evans <dje@canuck.cygnus.com>
3324 * sparc-opc.c (sparc_opcodes): Add setuw, setsw, setx.
3326 Tue Sep 3 12:05:25 1996 Jeffrey A Law (law@cygnus.com)
3328 * v850-dis.c (disassemble): Make static. Provide prototype.
3330 Sun Sep 1 22:30:40 1996 Jeffrey A Law (law@cygnus.com)
3332 * v850-opc.c (insert_d9, insert_d22): Fix boundary case
3335 Sat Aug 31 01:27:26 1996 Jeffrey A Law (law@cygnus.com)
3337 * v850-dis.c (disassemble): Handle insertion of ',', '[' and
3338 ']' characters into the output stream.
3339 * v850-opc.c (v850_opcodes: Remove size field from all opcodes.
3340 Add "memop" field to all opcodes (for the disassembler).
3341 Reorder opcodes so that "nop" comes before "mov" and "jr"
3342 comes before "jarl".
3344 * v850-dis.c (print_insn_v850): Fix typo in last change.
3346 * v850-dis.c (print_insn_v850): Properly handle disassembling
3347 a two byte insn at the end of a memory region when the memory
3348 region's size is only two byte aligned.
3350 * v850-dis.c (v850_cc_names): Fix stupid thinkos.
3352 * v850-dis.c (v850_reg_names): Define.
3353 (v850_sreg_names, v850_cc_names): Likewise.
3354 (disassemble): Very rough cut at printing operands (unformatted).
3356 * v850-opc.c (BOP_MASK): Fix.
3357 (v850_opcodes): Fix mask for jarl and jr.
3359 * v850-dis.c: New file. Skeleton for disassembler support.
3360 * Makefile.in Remove v850 references, they're not needed here.
3361 * configure.in: Add v850-dis.o when building v850 toolchains.
3362 * configure: Rebuilt.
3363 * disassemble.c (disassembler): Call v850 disassembler.
3365 * v850-opc.c (insert_d8_7, extract_d8_7): New functions.
3366 (insert_d8_6, extract_d8_6): New functions.
3367 (v850_operands): Rename D7S to D7; operand for D7 is unsigned.
3368 Rename D8 to D8_7, use {insert,extract}_d8_7 routines.
3370 (IF4A, IF4B): Use "D7" instead of "D7S".
3371 (IF4C, IF4D): Use "D8_7" instead of "D8".
3372 (IF4E, IF4F): New. Use "D8_6".
3373 (v850_opcodes): Use IF4A/IF4B for sld.b/sst.b. Use IF4C/IF4D for
3374 sld.h/sst.h. Use IF4E/IF4F for sld.w/sst.w.
3376 * v850-opc.c (insert_d16_15, extract_d16_15): New functions.
3377 (v850_operands): Change D16 to D16_15, use special insert/extract
3378 routines. New new D16 that uses the generic insert/extract code.
3379 (IF7A, IF7B): Use D16_15.
3380 (IF7C, IF7D): New. Use D16.
3381 (v850_opcodes): Use IF7C and IF7D for ld.b and st.b.
3383 * v850-opc.c (insert_d9, insert_d22): Slightly improve error
3384 message. Issue an error if the branch offset is odd.
3386 * v850-opc.c: Add notes about needing special insert/extract
3387 for all the load/store insns, except "ld.b" and "st.b".
3389 * v850-opc.c (insert_d22, extract_d22): New functions.
3390 (v850_operands): Use insert_d22 and extract_d22 for
3392 (insert_d9): Fix range check.
3394 Fri Aug 30 18:01:02 1996 J.T. Conklin <jtc@hippo.cygnus.com>
3396 * v850-opc.c (v850_operands): Add V850_OPERAND_SIGNED flag
3397 and set bits field to D9 and D22 operands.
3399 Thu Aug 29 11:10:46 1996 Jeffrey A Law (law@cygnus.com)
3401 * v850-opc.c (v850_operands): Define SR2 operand.
3402 (v850_opcodes): "ldsr" uses R1,SR2.
3404 * v850-opc.c (v850_opcodes): Fix opcode specs for
3405 sld.w, sst.b, sst.h, sst.w, and nop.
3407 Wed Aug 28 15:55:43 1996 Jeffrey A Law (law@cygnus.com)
3409 * v850-opc.c (v850_opcodes): Add null opcode to mark the
3410 end of the opcode table.
3412 Mon Aug 26 13:35:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3414 * d10v-opc.c (pre_defined_registers): Added register pairs,
3415 "r0-r1", "r2-r3", etc.
3417 Fri Aug 23 00:27:01 1996 Jeffrey A Law (law@cygnus.com)
3419 * v850-opc.c (v850_operands): Make I16 be a signed operand.
3420 Create I16U for an unsigned 16bit mmediate operand.
3421 (v850_opcodes): Use I16U for "ori", "andi" and "xori".
3423 * v850-opc.c (v850_operands): Define EP operand.
3424 (IF4A, IF4B, IF4C, IF4D): Use EP.
3426 * v850-opc.c (v850_opcodes): Fix opcode numbers for "mov"
3427 with immediate operand, "movhi". Tweak "ldsr".
3429 * v850-opc.c (v850_opcodes): Get ld.[bhw] and st.[bhw]
3430 correct. Get sld.[bhw] and sst.[bhw] closer.
3432 * v850-opc.c (v850_operands): "not" is a two byte insn
3434 * v850-opc.c (v850_opcodes): Correct bit pattern for setf.
3436 * v850-opc.c (v850_operands): D16 inserts at offset 16!
3438 * v850-opc.c (two): Get order of words correct.
3440 * v850-opc.c (v850_operands): I16 inserts at offset 16!
3442 * v850-opc.c (v850_operands): Add "SR1" and "SR2" for system
3443 register source and destination operands.
3444 (v850_opcodes): Use SR1 and SR2 for "ldsr" and "stsr".
3446 * v850-opc.c (v850_opcodes): Fix thinko in "jmp" opcode. Fix
3447 same thinko in "trap" opcode.
3449 * v850-opc.c (v850_opcodes): Add initializer for size field
3452 * v850-opc.c (v850_operands): D6 -> DS7. References changed.
3453 Add D8 for 8-bit unsigned field in short load/store insns.
3454 (IF4A, IF4D): These both need two registers.
3455 (IF4C, IF4D): Define. Use 8-bit unsigned field.
3456 (v850_opcodes): For "sld.h", "sld.w", "sst.h", "sst.w", use
3457 IF4C & IF4D. For "trap" use I5U, not I5. Add IF1 operand
3458 for "ldsr" and "stsr".
3459 * v850-opc.c (v850_operands): 3-bit immediate for bit insns
3462 * v850-opc.c (v850_opcodes): Correct short store half (sst.h) and
3463 short store word (sst.w).
3465 Thu Aug 22 16:57:27 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3467 * v850-opc.c (v850_operands): Added insert and extract fields,
3468 pointers to functions that handle unusual operand encodings.
3470 Thu Aug 22 01:05:24 1996 Jeffrey A Law (law@cygnus.com)
3472 * v850-opc.c (v850_opcodes): Enable "trap".
3474 * v850-opc.c (v850_opcodes): Fix order of displacement
3475 and register for "set1", "clr1", "not1", and "tst1".
3477 Wed Aug 21 18:46:26 1996 Jeffrey A Law (law@cygnus.com)
3479 * v850-opc.c (v850_operands): Add "B3" support.
3480 (v850_opcodes): Fix and enable "set1", "clr1", "not1"
3483 * v850-opc.c (v850_opcodes): "jmp" has only an R1 operand.
3485 * v850-opc.c: Close unterminated comment.
3487 Wed Aug 21 17:31:26 1996 J.T. Conklin <jtc@hippo.cygnus.com>
3489 * v850-opc.c (v850_operands): Add flags field.
3490 (v850_opcodes): add move opcodes.
3492 Tue Aug 20 14:41:03 1996 J.T. Conklin <jtc@hippo.cygnus.com>
3494 * Makefile.in (ALL_MACHINES): Add v850-opc.o.
3495 * configure: (bfd_v850v_arch) Add new case.
3496 * configure.in: (bfd_v850_arch) Add new case.
3497 * v850-opc.c: New file.
3499 Mon Aug 19 15:21:38 1996 Doug Evans <dje@canuck.cygnus.com>
3501 * sparc-dis.c (print_insn_sparc): Handle little endian sparcs.
3503 Thu Aug 15 13:14:43 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3505 * d10v-opc.c: Add additional information to the opcode
3506 table to help determinine which instructions can be done
3509 Thu Aug 15 13:11:13 1996 Stan Shebs <shebs@andros.cygnus.com>
3511 * mpw-make.sed: Update editing of include pathnames to be
3514 Thu Aug 15 16:28:41 1996 James G. Smith <jsmith@cygnus.co.uk>
3516 * arm-opc.h: Added "bx" instruction definition.
3518 Wed Aug 14 17:00:04 1996 Richard Henderson <rth@tamu.edu>
3520 * alpha-opc.c (EV4EXTHWINDEX): Field width should be 8 not 5.
3522 Mon Aug 12 14:30:37 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3524 * d10v-opc.c (d10v_opcodes): Minor fixes to addi and bl.l.
3526 Fri Aug 9 13:21:59 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3528 * d10v-opc.c (d10v_opcodes): Correct 'mv' unit entry to EITHER.
3530 Thu Aug 8 12:43:52 1996 Klaus Kaempf <kkaempf@progis.de>
3532 * makefile.vms: Update for alpha-opc changes.
3534 Wed Aug 7 11:55:10 1996 Ian Lance Taylor <ian@cygnus.com>
3536 * i386-dis.c (print_insn_i386): Actually return the correct value.
3537 (ONE, OP_ONE): #ifdef out; not used.
3539 Fri Aug 2 17:47:03 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3541 * d10v-opc.c (d10v_opcodes): Added 2 accumulator sub instructions.
3542 Changed subi operand type to treat 0 as 16.
3544 Wed Jul 31 16:21:41 1996 Ian Lance Taylor <ian@cygnus.com>
3546 * m68k-opc.c: Add cpushl for the mcf5200. From Ken Rose
3549 Wed Jul 31 14:39:27 1996 James G. Smith <jsmith@cygnus.co.uk>
3551 * arm-opc.h: (arm_opcodes): Added halfword and sign-extension
3552 memory transfer instructions. Add new format string entries %h and %s.
3553 * arm-dis.c: (print_insn_arm): Provide decoding of the new
3556 Fri Jul 26 11:45:04 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3558 * d10v-opc.c (d10v_operands): Added UNUM4S; a 4-bit accumulator shift.
3559 (d10v_opcodes): Modified accumulator shift instructions to use UNUM4S.
3561 Fri Jul 26 14:01:43 1996 Ian Lance Taylor <ian@cygnus.com>
3563 * alpha-dis.c (print_insn_alpha_osf): Remove.
3564 (print_insn_alpha_vms): Remove.
3565 (print_insn_alpha): Make globally visible. Chose the register
3566 names based on info->flavour.
3567 * disassemble.c: Always return print_insn_alpha for the alpha.
3569 Thu Jul 25 15:24:17 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3571 * d10v-dis.c (dis_long): Handle unknown opcodes.
3573 Thu Jul 25 12:08:09 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3575 * d10v-opc.c: Changes to support signed and unsigned numbers.
3576 All instructions with the same name that have long and short forms
3577 now end in ".l" or ".s". Divs added.
3578 * d10v-dis.c: Changes to support signed and unsigned numbers.
3580 Tue Jul 23 11:02:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3582 * d10v-dis.c: Change all functions to use info->print_address_func.
3584 Mon Jul 22 15:38:53 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
3586 * m68k-opc.c (m68k_opcodes): Make opcode masks for the ColdFire
3587 move ccr/sr insns more strict so that the disassembler only
3588 selects them when the addressing mode is data register.
3590 Mon Jul 22 11:25:24 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3591 * d10v-opc.c (pre_defined_registers): Declare.
3592 * d10v-dis.c (print_operand): Now uses pre_defined_registers
3593 to pick a better name for the registers.
3595 Mon Jul 22 13:47:23 1996 Ian Lance Taylor <ian@cygnus.com>
3597 * sparc-opc.c: Fix opcode values for fpack16, and fpackfix. Fix
3598 operands for fexpand and fpmerge. From Christian Kuehnke
3599 <Christian.Kuehnke@arbi.informatik.uni-oldenburg.de>.
3601 Mon Jul 22 13:17:06 1996 Richard Henderson <rth@tamu.edu>
3603 * alpha-dis.c (print_insn_alpha): No longer the user-visible
3604 print routine. Take new regnames and cpumask arguments.
3605 Kill the environment variable nonsense.
3606 (print_insn_alpha_osf): New function. Do OSF/1 style regnames.
3607 (print_insn_alpha_vms): New function. Do VMS style regnames.
3608 * disassemble.c (disassembler): Test bfd flavour to pick
3609 between OSF and VMS routines. Default to OSF.
3611 Thu Jul 18 17:19:34 1996 Ian Lance Taylor <ian@cygnus.com>
3613 * configure.in: Call AC_SUBST (INSTALL_SHLIB).
3614 * configure: Rebuild.
3615 * Makefile.in (install): Use @INSTALL_SHLIB@.
3617 Wed Jul 17 14:39:05 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3619 * configure: (bfd_d10v_arch) Add new case.
3620 * configure.in: (bfd_d10v_arch) Add new case.
3621 * d10v-dis.c: New file.
3622 * d10v-opc.c: New file.
3623 * disassemble.c (disassembler) Add entry for d10v.
3625 Wed Jul 17 10:12:05 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3627 * m68k-opc.c (m68k_opcodes): Fix bugs in coldfire insns relating
3628 to bcc, trapfl, subxl, and wddata discovered by Andreas Schwab.
3630 Mon Jul 15 16:59:55 1996 Stu Grossman (grossman@critters.cygnus.com)
3632 * i386-dis.c: Get rid of print_insn_i8086. Use info.mach to
3633 distinguish between variants of the instruction set.
3634 * sparc-dis.c: Get rid of print_insn_sparclite. Use info.mach to
3635 distinguish between variants of the instruction set.
3637 Fri Jul 12 10:12:01 1996 Stu Grossman (grossman@critters.cygnus.com)
3639 * i386-dis.c (print_insn_i8086): New routine to disassemble using
3640 the 8086 instruction set.
3641 * i386-dis.c: General cleanups. Make most things static. Add
3642 prototypes. Get rid of static variables aflags and dflags. Pass
3643 them as args (to almost everything).
3645 Thu Jul 11 11:58:44 1996 Jeffrey A Law (law@cygnus.com)
3647 * h8300-dis.c (bfd_h8_disassemble): Handle macregs in ldmac insns.
3649 * h8300-dis.c (bfd_h8_disassemble): Handle "ldm.l" and "stm.l".
3651 * h8300-dis.c (bfd_h8_disassemble): "abs" is implicitly two
3652 if the next arg is marked with SRC_IN_DST. Gross.
3654 * h8300-dis.c (bfd_h8_disassemble): Print "exr" when
3655 we're looking for and find EXR.
3657 * h8300-dis.c (bfd_h8_disassemble): We don't have a match
3658 if we're looking for KBIT and we don't find it.
3660 * h8300-dis.c (bfd_h8_disassemble): Mask off unwanted bits
3663 * h8300-dis.c (bfd_h8_disassemble): Don't set plen for
3664 3bit immediate operands.
3666 Tue Jul 9 10:55:20 1996 Ian Lance Taylor <ian@cygnus.com>
3668 * Released binutils 2.7.
3670 * alpha-opc.c: Add new case of "mov". From Klaus Kaempf
3671 <kkaempf@progis.ac-net.de>.
3673 Thu Jul 4 11:42:51 1996 Ian Lance Taylor <ian@cygnus.com>
3675 * alpha-opc.c: Correct second case of "mov" to use OPRL.
3677 Wed Jul 3 16:03:47 1996 Stu Grossman (grossman@critters.cygnus.com)
3679 * sparc-dis.c (print_insn_sparclite): New routine to print
3680 sparclite instructions.
3682 Wed Jul 3 14:21:18 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3684 * m68k-opc.c (m68k_opcodes): Add coldfire support.
3686 Fri Jun 28 15:53:51 1996 Doug Evans <dje@canuck.cygnus.com>
3688 * sparc-opc.c (asi_table): Add #ASI_N, #ASI_N_L, #ASI_NUCLEUS,
3689 #ASI_NUCLEUS_LITTLE. Rename #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_L
3690 to #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_LITTLE.
3692 Tue Jun 25 22:58:31 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
3694 * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir):
3695 Use autoconf-set values.
3696 (docdir, oldincludedir): Removed.
3697 * configure.in (AC_PREREQ): autoconf 2.5 or higher.
3699 Fri Jun 21 13:53:36 1996 Richard Henderson <rth@tamu.edu>
3701 * alpha-opc.c: New file.
3702 * alpha-opc.h: Remove.
3703 * alpha-dis.c: Complete rewrite to use new opcode table.
3704 * configure.in: For bfd_alpha_arch, use alpha-opc.o.
3705 * configure: Rebuild with autoconf 2.10.
3706 * Makefile.in (ALL_MACHINES): Add alpha-opc.o.
3707 (alpha-dis.o): Depend upon $(INCDIR)/opcode/alpha.h, not
3709 (alpha-opc.o): New target.
3711 Wed Jun 19 15:55:12 1996 Ian Lance Taylor <ian@cygnus.com>
3713 * sparc-dis.c (print_insn_sparc): Remove unused local variable i.
3714 Set imm_added_to_rs1 even if the source and destination register
3717 * sparc-opc.c: Add some two operand forms of the wr instruction.
3719 Tue Jun 18 15:58:27 1996 Jeffrey A. Law <law@rtl.cygnus.com>
3721 * h8300-dis.c (bfd_h8_disassemble): Rename "hmode" argument
3724 * disassemble.c (disassembler): Handle H8/S.
3725 * h8300-dis.c (print_insn_h8300s): New function for H8/S.
3727 Tue Jun 18 18:06:50 1996 Ian Lance Taylor <ian@cygnus.com>
3729 * sparc-opc.c: Add beq/teq as aliases for be/te.
3731 * ppc-opc.c: Fix fcmpo opcode. From Sergei Steshenko
3732 <sergei@msil.sps.mot.com>.
3734 Tue Jun 18 15:08:54 1996 Klaus Kaempf <kkaempf@progis.de>
3736 * makefile.vms: New file.
3738 * alpha-dis.c (print_insn_alpha): Print lda ra,lit(rz) as mov.
3740 Mon Jun 10 18:50:38 1996 Ian Lance Taylor <ian@cygnus.com>
3742 * h8300-dis.c (bfd_h8_disassemble): Always print ABS8MEM with :8,
3745 Tue Jun 4 09:15:53 1996 Doug Evans <dje@canuck.cygnus.com>
3747 * i386-dis.c (OP_OFF): Call append_prefix.
3749 Thu May 23 15:18:23 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3751 * ppc-opc.c (instruction encoding macros): Add explicit casts to
3752 unsigned long to silence a warning from the Solaris PowerPC
3755 Thu Apr 25 19:33:32 1996 Doug Evans <dje@canuck.cygnus.com>
3757 * sparc-opc.c (sparc_opcodes): Add ultrasparc vis extensions.
3759 Mon Apr 22 17:12:35 1996 Doug Evans <dje@blues.cygnus.com>
3761 * sparc-dis.c (X_IMM,X_SIMM): New macros.
3763 (print_insn_sparc): Merge cases i,I,j together. New cases X,Y.
3764 * sparc-opc.c (sparc_opcodes): Use X for 5 bit shift constants,
3765 Y for 6 bit shift constants. Rewrite entries for crdcxt, cwrcxt,
3766 cpush, cpusha, cpull sparclet insns.
3768 Wed Apr 17 14:20:22 1996 Doug Evans <dje@canuck.cygnus.com>
3770 * sparc-dis.c (compute_arch_mask): Replace ANSI style def with K&R.
3772 Thu Apr 11 17:30:02 1996 Ian Lance Taylor <ian@cygnus.com>
3774 * sparc-opc.c: Set F_FBR on floating point branch instructions.
3775 Set F_FLOAT on other floating point instructions.
3777 Mon Apr 8 17:02:48 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3779 * ppc-opc.c (PPC860): Macro for 860/821 specific instructions and
3781 (powerpc_opcodes): Add 860/821 specific SPRs.
3783 Mon Apr 8 14:00:44 1996 Ian Lance Taylor <ian@cygnus.com>
3785 * configure.in: Permit --enable-shared to specify a list of
3786 directories. Set and substitute BFD_PICLIST.
3787 * configure: Rebuild.
3788 * Makefile.in (BFD_PICLIST): Rename from BFD_LIST. Change all
3789 uses. Set to @BFD_PICLIST@.
3791 Fri Apr 5 17:12:27 1996 Jeffrey A Law (law@cygnus.com)
3793 * h8300-dis.c (bfd_h8_disassemble): Use "bit" for L_3 immediates,
3794 not "abs", which may be needed for the absolute in something
3795 like btst #0,@10:8. Print L_3 immediates separately from other
3796 immediates. Change ABSMOV reference to ABS8MEM.
3798 Wed Apr 3 10:40:45 1996 Doug Evans <dje@canuck.cygnus.com>
3800 * sparc-dis.c (opcodes_initialized): Move inside print_insn_sparc.
3801 (current_arch_mask): New static global.
3802 (compute_arch_mask): New static function.
3803 (print_insn_sparc): Delete sparc_v9_p. New static local
3804 current_mach. Resort opcode table if current_mach changes.
3805 Generalize "insn not supported" test.
3806 (compare_opcodes): Prefer supported opcodes to nonsupported ones.
3807 Delete test for v9/!v9.
3808 * sparc-opc.c (MASK_*): Use SPARC_OPCODE_ARCH_MASK.
3810 (brfc): Split into CBR and FBR for coprocessor/fp branches.
3811 (brfcx): Renamed to FBRX.
3812 (condfc): Renamed to CONDFC. Pass v6notlet to CBR (standard
3813 coprocessor mnemonics are not supported on the sparclet).
3814 (condf): Renamed to CONDF.
3815 (SLCBCC2): Delete F_ALIAS flag.
3817 Sat Mar 30 21:45:59 1996 Doug Evans <dje@canuck.cygnus.com>
3819 * sparc-opc.c (sparc_opcodes): rd must be 0 for
3820 mov foo,{%y,%psr,%wim,%tbr}. Support mov foo,%asrX.
3822 Fri Mar 29 13:02:40 1996 Ian Lance Taylor <ian@cygnus.com>
3824 * Makefile.in (config.status): Depend upon BFD VERSION file, so
3825 that the shared library version number is set correctly.
3827 Tue Mar 26 15:47:14 1996 Ian Lance Taylor <ian@cygnus.com>
3829 * configure.in: Use AC_CHECK_TOOL to find ar and ranlib. From
3830 Miles Bader <miles@gnu.ai.mit.edu>.
3831 * configure: Rebuild.
3833 Sat Mar 16 13:04:07 1996 Fred Fish <fnf@cygnus.com>
3835 * z8kgen.c (internal, gas): Call xmalloc rather than unchecked
3838 Tue Mar 12 12:14:10 1996 Ian Lance Taylor <ian@cygnus.com>
3840 * configure: Rebuild with autoconf 2.8.
3842 Thu Mar 7 15:11:10 1996 Doug Evans <dje@charmed.cygnus.com>
3844 * sparc-dis.c (print_insn_sparc): Handle 'O' operand char like 'r'.
3845 * sparc-opc.c (sparc_opcodes): Use 'O' operand char for `neg reg'.
3847 Tue Mar 5 15:51:57 1996 Ian Lance Taylor <ian@cygnus.com>
3849 * configure.in: Don't set SHLIB or SHLINK to an empty string,
3850 since they appear as targets in Makefile.in.
3851 * configure: Rebuild.
3853 Mon Feb 26 13:03:40 1996 Stan Shebs <shebs@andros.cygnus.com>
3855 * mpw-make.sed: Edit out shared library support bits.
3857 Tue Feb 20 20:48:28 1996 Doug Evans <dje@charmed.cygnus.com>
3859 * sparc-opc.c (v8,v6notv9): Add MASK_SPARCLET.
3860 (sparc_opcode_archs): Add MASK_V8 to sparclet entry.
3861 (sparc_opcodes): Add sparclet insns.
3862 (sparclet_cpreg_table): New static local.
3863 (sparc_{encode,decode}_sparclet_cpreg): New functions.
3864 * sparc-dis.c (print_insn_sparc): Handle sparclet cpregs.
3866 Tue Feb 20 11:02:44 1996 Alan Modra <alan@mullet.Levels.UniSA.Edu.Au>
3868 * i386-dis.c (index16): New static variable.
3869 (putop): Print jecxz for 32 bit case, jcxz for 16 bit, not the
3871 (OP_indirE): Return result of OP_E.
3872 (OP_E): Check for 16 bit addressing mode, and disassemble
3873 correctly. Optimised 32 bit case a little. Don't print
3874 "(base,index,scale)" when sib specifies only an offset.
3876 Mon Feb 19 12:32:17 1996 Ian Lance Taylor <ian@cygnus.com>
3878 * configure.in: Set and substitute SHLIB_DEP.
3879 * configure: Rebuild.
3880 * Makefile.in (SHLIB_DEP): New variable.
3881 (LIBIBERTY_LISTS, BFD_LIST): New variables.
3882 (stamp-piclist): Depend upon LIBIBERTY_LISTS and BFD_LIST. If
3883 COMMON_SHLIB, add them to piclist with appropriate modifications.
3884 ($(SHLIB)): Depend upon $(SHLIB_DEP). Don't check COMMON_SHLIB
3885 here: just use piclist.
3887 Mon Feb 19 02:03:50 1996 Doug Evans <dje@charmed.cygnus.com>
3889 * sparc-dis.c (MASK_V9,V9_ONLY_P,V9_P): Define.
3890 (print_insn_sparc): Rewrite v9/not-v9 tests.
3891 (compare_opcodes): Likewise.
3892 * sparc-opc.c (MASK_<ARCH>): Define.
3893 (v6,v7,v8,sparclite,v9,v9a): Redefine.
3894 (sparclet,v6notv9): Define.
3895 (sparc_opcode_archs): Delete member `conflicts'. Add `supported'.
3896 (sparc_opcodes): Delete F_NOTV9, use v6notv9 instead.
3898 Thu Feb 15 14:45:05 1996 Ian Lance Taylor <ian@cygnus.com>
3900 * configure.in: Call AC_PROG_CC before configure.host.
3901 * configure: Rebuild.
3903 * Makefile.in (SONAME): Remove leading ../bfd/ from $(SHLIB).
3905 Wed Feb 14 19:01:27 1996 Alan Modra <alan@spri.levels.unisa.edu.au>
3907 * i386-dis.c (onebyte_has_modrm): New static array.
3908 (twobyte_has_modrm): New static array.
3909 (print_insn_i386): Only fetch the mod/reg/rm byte if it is needed.
3911 Tue Feb 13 15:15:01 1996 Ian Lance Taylor <ian@cygnus.com>
3913 * Makefile.in ($(SHLINK)): Check ts against $(SHLIB), not
3916 Mon Feb 12 16:26:06 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3918 * ppc-opc.c (PPC): Undef, so default defination on Windows NT
3921 Wed Feb 7 13:59:54 1996 Ian Lance Taylor <ian@cygnus.com>
3923 * m68k-opc.c (m68k_opcodes): The bkpt instruction is supported on
3924 m68010up, not just m68020up | cpu32.
3926 * Makefile.in (SONAME): New variable.
3927 ($(SHLINK)): Make a link to the transformed name, as well.
3928 (stamp-tshlink): New target.
3929 (install): Skip stamp-tshlink during install.
3931 Tue Feb 6 12:28:54 1996 Ian Lance Taylor <ian@cygnus.com>
3933 * configure.in: Call AC_ARG_PROGRAM.
3934 * configure: Rebuild.
3935 * Makefile.in (program_transform_name): New variable.
3936 (install): Transform library name before installing it.
3938 Mon Feb 5 16:14:42 1996 Ian Lance Taylor <ian@cygnus.com>
3940 * i960-dis.c (mem): Add HX dcinva instruction.
3942 Support for building as a shared library, based on patches from
3943 Alan Modra <alan@spri.levels.unisa.edu.au>:
3944 * configure.in: Add AC_ARG_ENABLE for shared and commonbfdlib.
3945 New substitutions: ALLLIBS, PICFLAG, SHLIB, SHLIB_CC,
3946 SHLIB_CFLAGS, COMMON_SHLIB, SHLINK.
3947 * configure: Rebuild.
3948 * Makefile.in (ALLLIBS): New variable.
3949 (PICFLAG, SHLIB, SHLIB_CC, SHLIB_CFLAGS): New variables.
3950 (COMMON_SHLIB, SHLINK): New variables.
3951 (.c.o): If PICFLAG is set, compile twice, once PIC, once normal.
3952 (STAGESTUFF): Remove variable.
3953 (all): Depend upon $(ALLLIBS) rather than $(TARGETLIB).
3954 (stamp-piclist, piclist): New targets.
3955 ($(SHLIB), $(SHLINK)): New targets.
3956 ($(OFILES)): Depend upon stamp-picdir.
3957 (disassemble.o): Build twice if PICFLAG is set.
3958 (MOSTLYCLEAN): Add pic/*.o.
3959 (clean): Remove $(SHLIB), $(SHLINK), piclist, and stamp-piclist.
3960 (distclean): Remove pic and stamp-picdir.
3961 (install): Install shared libraries.
3962 (stamp-picdir): New target.
3964 Fri Feb 2 17:15:25 1996 Doug Evans <dje@charmed.cygnus.com>
3966 * sparc-dis.c (print_insn_sparc): Delete DISASM_RAW_INSN support.
3967 Print unknown instruction as "unknown", rather than in hex.
3969 Tue Jan 30 14:06:08 1996 Ian Lance Taylor <ian@cygnus.com>
3971 * dis-buf.c: Include "sysdep.h" before "dis-asm.h".
3973 Thu Jan 25 20:24:07 1996 Doug Evans <dje@charmed.cygnus.com>
3975 * sparc-opc.c (sparc_opcode_archs): Mark v8/sparclite as conflicting.
3977 Thu Jan 25 11:56:49 1996 Ian Lance Taylor <ian@cygnus.com>
3979 * i386-dis.c (print_insn_i386): Only fetch the mod/reg/rm byte
3980 when necessary. From Ulrich Drepper
3981 <drepper@myware.rz.uni-karlsruhe.de>.
3983 Thu Jan 25 03:39:10 1996 Doug Evans <dje@charmed.cygnus.com>
3985 * sparc-dis.c (print_insn_sparc): NUMOPCODES replaced with
3986 sparc_num_opcodes. Update architecture enum values.
3987 * sparc-opc.c (sparc_opcode_archs): Replaces architecture_pname.
3988 (sparc_opcode_lookup_arch): New function.
3989 (sparc_num_opcodes): Renamed from bfd_sparc_num_opcodes.
3990 (sparc_opcodes): Add v9a shutdown insn.
3992 Mon Jan 22 08:29:59 1996 Doug Evans <dje@charmed.cygnus.com>
3994 * sparc-dis.c (print_insn_sparc): Renamed from print_insn.
3995 If DISASM_RAW_INSN, print insn in hex. Handle v9a as opcode
3997 (print_insn_sparc64): Deleted.
3998 * disassemble.c (disassembler, case bfd_arch_sparc): Always use
4001 * sparc-opc.c (architecture_pname): Add v9a.
4003 Fri Jan 12 14:35:58 1996 David Mosberger-Tang <davidm@AZStarNet.com>
4005 * alpha-opc.h (alpha_insn_set): VAX floating point opcode was
4006 incorrectly defined as 0x16 when it should be 0x15.
4007 (FLOAT_FORMAT_MASK): function code is 11 bits, not just 7 bits!
4008 (alpha_insn_set): added cvtst and cvttq float ops. Also added
4009 excb (exception barrier) which is defined in the Alpha
4010 Architecture Handbook version 2.
4011 * alpha-dis.c (print_insn_alpha): Fixed special-case decoding for
4012 OPERATE_FORMAT_CODE type instructions. The bug caused mulq to be
4013 disassembled as or, for example.
4015 Wed Jan 10 12:37:22 1996 Ian Lance Taylor <ian@cygnus.com>
4017 * mips-dis.c (print_insn_arg): Print cases 'i' and 'u' in hex.
4018 (_print_insn_mips): Change i from int to unsigned int.
4020 Thu Jan 4 17:21:10 1996 David Edelsohn <edelsohn@mhpcc.edu>
4022 * ppc-opc.c (powerpc_opcodes): tlbi POWER opcode form different
4023 from tlbie PowerPC opcode. Add PPC603 tlbld and tlbli.
4025 Thu Dec 28 13:29:19 1995 John Hassey <hassey@rtp.dg.com>
4027 * i386-dis.c: Added Pentium Pro instructions.
4029 Tue Dec 19 22:56:35 1995 Michael Meissner <meissner@tiktok.cygnus.com>
4031 * ppc-opc.c (fsqrt{,.}): Duplicate for PowerPC in addition to
4034 Fri Dec 15 14:14:15 1995 J.T. Conklin <jtc@rtl.cygnus.com>
4036 * sh-opc.h (sh_nibble_type): Added REG_B.
4037 (sh_arg_type): Added A_REG_B.
4038 (sh_table): Added pref and bank reg versions of ldc, ldc.l, stc
4040 * sh-dis.c (print_insn_shx): Added cases for REG_B and A_REG_B.
4042 Fri Dec 15 16:44:31 1995 Ian Lance Taylor <ian@cygnus.com>
4044 * disassemble.c (disassembler): Use new bfd_big_endian macro.
4046 Tue Dec 12 12:22:24 1995 Ian Lance Taylor <ian@cygnus.com>
4048 * Makefile.in (distclean): Remove stamp-h. From Ronald
4049 F. Guilmette <rfg@monkeys.com>.
4051 Tue Dec 5 13:42:44 1995 Stan Shebs <shebs@andros.cygnus.com>
4053 From David Mosberger-Tang <davidm@azstarnet.com>:
4054 * alpha-dis.c (print_insn_alpha): fixed decoding of cpys
4057 Mon Dec 4 12:29:05 1995 J.T. Conklin <jtc@rtl.cygnus.com>
4059 * sh-opc.h (sh_arg_type): Added A_SSR and A_SPC.
4060 (sh_table): Added many SH3 opcodes.
4061 * sh-dis.c (print_insn_shx): Added cases for A_SSR and A_SPC.
4063 Fri Dec 1 07:42:18 1995 Michael Meissner <meissner@tiktok.cygnus.com>
4065 * ppc-opc.c (subfc., subfco): Mark this PPCCOM, not PPC.
4066 (subco,subco.): Mark this PPC, not PPCCOM.
4068 Mon Nov 27 13:09:52 1995 Ian Lance Taylor <ian@cygnus.com>
4070 * configure: Rebuild with autoconf 2.7.
4072 Tue Nov 21 18:28:06 1995 Ian Lance Taylor <ian@cygnus.com>
4074 * configure: Rebuild with autoconf 2.6.
4076 Wed Nov 15 19:02:53 1995 Ken Raeburn <raeburn@cygnus.com>
4078 * configure.in: Sort list of architectures. Accept but do nothing
4079 for alliant, convex, pyramid, romp, and tahoe.
4081 Wed Nov 8 20:18:59 1995 Ian Lance Taylor <ian@cygnus.com>
4083 * a29k-dis.c (print_special): Change num to unsigned int.
4085 Wed Nov 8 20:10:35 1995 Eric Freudenthal <freudenthal@nyu.edu>
4087 * a29k-dis.c (print_insn): Cast insn24 to unsigned long when
4090 Tue Nov 7 15:21:06 1995 Ian Lance Taylor <ian@cygnus.com>
4092 * configure.in: Call AC_CHECK_PROG to find and cache AR.
4093 * configure: Rebuilt.
4095 Mon Nov 6 17:39:47 1995 Harry Dolan <dolan@ssd.intel.com>
4097 * configure.in: Add case for bfd_i860_arch.
4098 * configure: Rebuild.
4100 Fri Nov 3 12:45:31 1995 Ian Lance Taylor <ian@cygnus.com>
4102 * m68k-opc.c (m68k_opcodes): Correct fmoveml operands.
4103 * m68k-dis.c (NEXTSINGLE): Change i to unsigned int.
4104 (NEXTDOUBLE): Likewise.
4105 (print_insn_m68k): Don't match fmoveml if there is more than one
4106 register in the list.
4107 (print_insn_arg): Handle a place of '8' for a type of 'L'.
4109 Thu Nov 2 23:06:33 1995 Ian Lance Taylor <ian@cygnus.com>
4111 * m68k-opc.c: Use #W rather than #w.
4112 * m68k-dis.c (print_insn_arg): Handle new 'W' place.
4114 Wed Nov 1 13:30:24 1995 Ian Lance Taylor <ian@cygnus.com>
4116 * m68k-opc.c (m68k_opcode_aliases): Add dbfw as an alias for dbf,
4117 and likewise for all the dbxx opcodes.
4119 Mon Oct 30 20:50:40 1995 Fred Fish <fnf@cygnus.com>
4121 * arc-dis.c: Include elf-bfd.h rather than libelf.h.
4123 Mon Oct 23 11:11:34 1995 James G. Smith <jsmith@pasanda.cygnus.co.uk>
4125 * mips-opc.c: Added shorthand (V1) for INSN_4100 manifest. Added
4126 the VR4100 specific instructions to the mips_opcodes structure.
4128 Thu Oct 19 11:05:23 1995 Stan Shebs <shebs@andros.cygnus.com>
4130 * mpw-config.in, mpw-make.sed: Remove ugly workaround for
4131 ugly Metrowerks bug in CW6, is fixed in CW7.
4133 Mon Oct 16 12:59:01 1995 Michael Meissner <meissner@tiktok.cygnus.com>
4135 * ppc-opc.c (whole file): Add flags for common/any support.
4137 Tue Oct 10 11:06:07 1995 Fred Fish <fnf@cygnus.com>
4139 * Makefile.in (BISON): Remove macro.
4140 (FLAGS_TO_PASS): Remove BISON.
4142 Fri Oct 6 16:26:45 1995 Ken Raeburn <raeburn@cygnus.com>
4144 Mon Sep 25 22:49:32 1995 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
4146 * m68k-dis.c (print_insn_m68k): Recognize all two-word
4147 instructions that take no args by looking at the match mask.
4148 (print_insn_arg): Always print "%" before register names.
4149 [case 'c']: Use "nc" for the no-cache case, as recognized by gas.
4150 [case '_']: Don't print "@#" before address.
4151 [case 'J']: Use "%s" as format string, not register name.
4152 [case 'B']: Treat place == 'C' like 'l' and 'L'.
4154 Thu Oct 5 22:16:20 1995 Ken Raeburn <raeburn@cygnus.com>
4156 * i386-dis.c: Describe cmpxchg8b operand, and spell the opcode
4159 Tue Oct 3 08:30:20 1995 steve chamberlain <sac@slash.cygnus.com>
4161 From David Mosberger-Tang <davidm@azstarnet.com>
4163 * alpha-opc.h (MEMORY_FUNCTION_FORMAT_MASK): added.
4164 (alpha_insn_set): added definitions for VAX floating point
4165 instructions (Unix compilers don't generate these, but handcoded
4166 assembly might still use them).
4168 * alpha-dis.c (print_insn_alpha): added support for disassembling
4169 the miscellaneous instructions in the Alpha instruction set.
4171 Tue Sep 26 18:47:20 1995 Stan Shebs <shebs@andros.cygnus.com>
4173 * mpw-config.in: Add m68k-opc.c.o to BFD_MACHINES for m68k,
4174 no longer create sysdep.h, sed ppc-opc.c to work around a
4175 serious Metrowerks C bug.
4176 * mpw-make.in: Remove.
4177 * mpw-make.sed: New file, used by mpw-configure to edit
4178 Makefile.in into an MPW makefile.
4180 Wed Sep 20 12:55:28 1995 Ian Lance Taylor <ian@cygnus.com>
4182 * Makefile.in (maintainer-clean): New synonym for realclean.
4184 Tue Sep 19 15:28:36 1995 Ian Lance Taylor <ian@cygnus.com>
4186 * m68k-opc.c: Split pmove patterns which use 'P' into patterns
4187 which use '0', '1', and '2' instead. Specify the proper size for
4188 a pmove immediate operand. Correct the pmovefd patterns to be
4189 moves to a register, not from a register.
4190 * m68k-dis.c (print_insn_arg): Replace 'P' with '0', '1', '2'.
4192 Thu Sep 14 11:58:22 1995 Doug Evans <dje@canuck.cygnus.com>
4194 * sparc-opc.c (sparc_opcodes): Mark all insns that reference
4195 %psr, %wim, %tbr as F_NOTV9.
4197 Fri Sep 8 01:07:38 1995 Ian Lance Taylor <ian@cygnus.com>
4199 * Makefile.in (Makefile): Just rebuild Makefile when running
4201 (config.h, stamp-h): New targets.
4202 * configure.in: Call AC_CONFIG_HEADER and AC_CANONICAL_SYSTEM
4203 earlier. Don't bother to call AC_ARG_PROGRAM. Touch stamp-h when
4204 rebuilding config.h.
4205 * configure: Rebuild.
4207 * mips-opc.c: Change unaligned loads and stores with "t,A"
4208 operands to use "t,A(b)".
4210 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4212 * sh-dis.c (print_insn_shx): Add F_FR0 support.
4214 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4216 * sh-dis.c (print_insn_shx): Change loop over op->arg[n] to iterate
4217 until 3 instead of until 2.
4219 Wed Sep 6 21:21:33 1995 Ian Lance Taylor <ian@cygnus.com>
4221 * Makefile.in (ALL_CFLAGS): Define.
4222 (.c.o, disassemble.o): Use $(ALL_CFLAGS).
4223 (MOSTLYCLEAN): Add config.log.
4224 (distclean): Don't remove config.log.
4225 * configure.in: Substitute HDEFINES.
4226 * configure: Rebuild.
4228 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4230 * sh-opc.h (sh_arg_type): Add F_FR0.
4231 (sh_table, case fmac): Add F_FR0 as first argument.
4233 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4235 * sh-opc.h (sh_opcode_info): Increase arg array size to 4.
4237 Tue Sep 5 18:28:10 1995 Doug Evans <dje@canuck.cygnus.com>
4239 * sparc-dis.c: Remove all references to NO_V9.
4241 Tue Sep 5 20:03:26 1995 Ian Lance Taylor <ian@cygnus.com>
4243 * aclocal.m4: Just include ../bfd/aclocal.m4.
4244 * configure: Rebuild.
4246 Tue Sep 5 16:09:59 1995 Doug Evans <dje@canuck.cygnus.com>
4248 * sparc-dis.c (X_DISP19): Define.
4249 (print_insn, case 'G'): Use it.
4250 (print_insn, case 'L'): Sign extend displacement.
4252 Mon Sep 4 14:28:46 1995 Ian Lance Taylor <ian@cygnus.com>
4254 * configure.in: Run ../bfd/configure.host before AC_PROG_CC.
4255 Subsitute CFLAGS and AR. Call AC_PROG_INSTALL. Don't substitute
4256 host_makefile_frag or frags.
4257 * aclocal.m4: New file.
4258 * configure: Rebuild.
4259 * Makefile.in (INSTALL): Set to @INSTALL@.
4260 (INSTALL_PROGRAM): Set to @INSTALL_PROGRAM@.
4261 (INSTALL_DATA): Set to @INSTALL_DATA@.
4263 (AR_FLAGS): Set to rc rather than qc.
4264 (CC): Define as @CC@.
4265 (CFLAGS): Set to @CFLAGS@.
4266 (@host_makefile_frag@): Remove.
4267 (config.status): Remove dependency upon @frags@.
4269 * configure.in: ../bfd/config.bfd now just sets shell variables.
4270 Use them rather than looking through target Makefile fragments.
4271 * configure: Rebuild.
4273 Thu Aug 31 12:35:32 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4275 * sh-opc.h (ftrc): Change FPUL_N to FPUL_M.
4277 Wed Aug 30 13:52:28 1995 Doug Evans <dje@canuck.cygnus.com>
4279 * sparc-opc.c (sparc_opcodes): Delete duplicate wr %y insn.
4280 Add clrx, iprefetch, signx, clruw, cas, casl, casx, casxl synthetic
4283 * sparc-opc.c (sparc_opcodes): Fix prefetcha insn.
4284 (lookup_{name,value}): New functions.
4285 (prefetch_table): New static local.
4286 (sparc_{encode,decode}_prefetch): New functions.
4287 * sparc-dis.c (print_insn): Handle '*' arg (prefetch function).
4289 Wed Aug 30 11:11:58 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4291 * sh-opc.h: Add blank lines to improve readabililty of sh3e
4294 Wed Aug 30 11:09:38 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4296 * sh-dis.c: Correct comment on first line of file.
4298 Tue Aug 29 15:37:18 1995 Doug Evans <dje@canuck.cygnus.com>
4300 * disassemble.c (disassembler): Handle bfd_mach_sparc64.
4302 * sparc-opc.c (asi, membar): New static locals.
4303 (sparc_{encode,decode}_{asi,membar}): New functions.
4304 (sparc_opcodes, membar insn): Fix.
4305 * sparc-dis.c (print_insn): Call sparc_decode_asi.
4306 Support decoding of membar masks.
4309 Sat Aug 26 21:22:48 1995 Ian Lance Taylor <ian@cygnus.com>
4311 * m68k-opc.c (m68k_opcode_aliases): Add br, brs, brb, brw, brl.
4313 Mon Aug 21 17:33:36 1995 Ian Lance Taylor <ian@cygnus.com>
4315 * m68k-opc.c (m68k_opcode_aliases): Add bhib as an alias for bhis,
4316 and likewise for the other branches. Add bhs as an alias for bcc,
4317 and likewise for the size variants. Add dbhs as an alias for
4320 Fri Aug 11 13:40:24 1995 Jeff Law (law@snake.cs.utah.edu)
4322 * sh-opc.h (FP sts instructions): Update to match reality.
4324 Mon Aug 7 16:12:58 1995 Ian Lance Taylor <ian@cygnus.com>
4326 * m68k-dis.c: (fpcr_names): Add % before all register names.
4327 (reg_names): Likewise.
4328 (print_insn_arg): Don't explicitly print % before register names.
4329 Add % before register names in static array names. In case 'r',
4330 print data registers as `@(Dn)', not `Dn@'. When printing a
4331 memory address, don't print @# before it.
4332 (print_indexed): Change base_disp and outer_disp from int to
4333 bfd_vma. Print using MIT syntax, not mutant invalid Motorola
4334 syntax. Sign extend 8 byte displacement correctly.
4335 (print_base): Print using MIT syntax. Print zpc when appropriate.
4336 Change parameter disp from int to bfd_vma.
4338 * m68k-opc.c (m68k_opcode_aliases): Add jsrl and jsrs as aliases
4341 Mon Aug 7 02:21:40 1995 Jeff Law (law@snake.cs.utah.edu)
4343 * sh-dis.c (print_insn_shx): Handle new operand types F_REG_N,
4344 F_REG_M, FPSCR_M, FPSCR_N, FPUL_M and FPUL_N.
4345 * sh-opc.h (sh_arg_type): Add new operand types.
4346 (sh_table): Add new opcodes from SH3E Floating Point ISA.
4348 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
4350 * Makefile.in (distclean): Remove generated file config.h.
4352 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
4354 * Makefile.in (distclean): Remove generated file config.h.
4356 Wed Aug 2 18:33:40 1995 Ian Lance Taylor <ian@cygnus.com>
4358 * m68k-opc.c: New file, holding tables from include/opcode/m68k.h.
4360 * m68k-dis.c: Remove BREAK_UP_BIG_DECL stuff.
4362 (print_insn_m68k): Change d to be const. Use m68k_numopcodes
4363 rather than numopcodes. Use m68k_opcodes rather than removed
4364 opcode function. Don't check F_ALIAS.
4365 (print_insn_arg): Change first parameter to be const char *.
4366 * Makefile.in (ALL_MACHINES): Add m68k-opc.o.
4367 (m68k-opc.o): New target.
4368 * configure.in: Build m68k-opc.o for bfd_m68k_arch.
4369 * configure: Rebuild.
4371 Wed Aug 2 08:23:38 1995 Doug Evans <dje@canuck.cygnus.com>
4373 * sparc-dis.c (HASH_SIZE, HASH_INSN): Define.
4374 (opcode_bits, opcode_hash_table): New variables.
4375 (opcodes_initialized): Renamed from opcodes_sorted.
4376 (build_hash_table): New function.
4377 (is_delayed_branch): Use hash table.
4378 (print_insn): Renamed from print_insn_sparc, made static.
4379 Build and use hash table. If !sparc64, ignore sparc64 insns,
4380 and vice-versa if sparc64.
4381 (print_insn_sparc, print_insn_sparc64): New functions.
4382 (compare_opcodes): Move sparc64 opcodes to end.
4383 Print commutative insns with constant second.
4384 * sparc-opc.c (all non-v9 insns): Use flag F_NOTV9 instead of F_ALIAS.
4386 Tue Aug 1 00:12:49 1995 Ian Lance Taylor <ian@cygnus.com>
4388 * sh-dis.c (print_insn_shx): Remove unused local dslot. Use
4389 print_address_func for A_BDISP12 and A_BDISP8. Correct test which
4390 avoids printing a delay slot in a delay slot.
4391 * sh-opc.h (sh_table): Fully bracket last entry.
4393 Mon Jul 31 12:04:47 1995 Doug Evans <dje@canuck.cygnus.com>
4395 * sparc-opc.c (sllx, srax, srlx): Fix disassembly.
4397 Wed Jul 12 00:59:34 1995 Ken Raeburn <raeburn@kr-pc.cygnus.com>
4399 * configure.in: Get host_makefile_frag from ${srcdir}.
4401 * configure.in: Autoconfiscated. Check for string[s].h. Create
4402 config.h from config.in. Don't set up sysdep.h link.
4403 * sysdep.h: New file.
4404 * configure, config.in: New files, generated from configure.in.
4405 * Makefile.in: Updated to be processed autoconf-style.
4406 (distclean): Keep sysdep.h. Remove config.log and config.cache.
4407 (Makefile): Depend on config.status.
4408 (config.status): New rule.
4409 * configure.bat: Update Makefile substitutions.
4411 Tue Jul 11 14:23:37 1995 Jeff Spiegel <jeffs@lsil.com>
4413 * mips-opc.c (L1): Define.
4414 (mips_opcodes): Add R4010 instructions: flushi, flushd, flushid,
4415 addciu, madd, maddu, ffc, ffs, msub, msubu, selsi, selsr, waiti,
4418 Tue Jul 11 11:49:49 1995 Ian Lance Taylor <ian@cygnus.com>
4420 * mips-opc.c (mips_opcodes): For the move pseudo-op, prefer daddu
4421 if ISA 3 and addu otherwise, replacing or, since some MIPS chips
4422 have multiple add units but only a single logical unit.
4424 * ppc-opc.c (powerpc_operands): Change CR to use a bitsize of 3,
4425 shifted by 18, without any insertion or extraction function.
4426 (insert_cr, extract_cr): Remove.
4428 Wed Jun 21 20:05:39 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4430 * m68k-dis.c (print_insn_arg, print_indexed): Print "%" before
4433 Thu Jun 15 17:23:31 1995 Stan Shebs <shebs@andros.cygnus.com>
4435 * mpw-config.in: Add sh and i386 configs, remove sparc config.
4436 * sh-opc.h: Add copyright.
4438 Mon Jun 5 03:30:43 1995 Ken Raeburn <raeburn@kr-laptop.cygnus.com>
4440 * Makefile.in (crunch-m68k): Delete extra target accidentally
4441 checked in a while ago.
4443 Wed May 24 16:22:13 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4445 * sh-opc.h (sh_table): Add SH3 support.
4447 Wed May 24 14:16:08 1995 Steve Chamberlain <sac@slash.cygnus.com>
4449 * sh-opc.h: Added bsrf and braf.
4451 Wed May 10 14:28:16 1995 Richard Earnshaw (rearnsha@armltd.co.uk)
4453 * arm-opc.h (arm_opcodes): Add 64-bit multiply patterns. Delete
4454 bogus [ls]fm{ea,fd} patterns.
4456 * arm-opc.h (arm_opcodes): Correct typos in stm, ldm, std, and ldc.
4457 * arm-dis.c (print_insn_arm): Make GIVEN a parameter, don't try and
4458 initialize it from memory. Make function static.
4459 (print_insn_{big,little}_arm): New functions.
4460 * disassemble.c (disassembler, case bfd_arch_arm): Disassemble for
4461 the correct endianness.
4463 Mon Apr 24 14:18:05 1995 Jason Molenda (crash@phydeaux.cygnus.com>
4465 * sh-opc.h (sh_nibble_type, sh_arg_type): remove trailing , from
4468 Wed Apr 19 14:07:03 1995 Michael Meissner <meissner@tiktok.cygnus.com>
4470 * m68k-dis.c (opcode): Finish change made by Kung Hsu on April
4471 17th, so that it builds again using GCC as the compiler.
4473 Tue Apr 18 12:14:51 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4475 * mips-dis.c (print_insn_little_mips): Cast return value from
4476 bfd_getl32 from bfd_vma to unsigned long, because _print_insn_mips
4477 expects an unsigned long, and that might be fewer words of
4478 argument storage (e.g., if bfd_vma is long long on a 32-bit
4480 (print_insn_big_mips): Likewise with bfd_getb32 value.
4481 (_print_insn_mips): Now static.
4483 Mon Apr 17 12:23:28 1995 Kung Hsu <kung@rtl.cygnus.com>
4485 * m68k-dis.c: Take out #define BREAK_UP_BIG_DECL kludge, because
4486 gcc memory hog problem with initializer is fixed.
4488 Mon Apr 10 15:55:01 1995 Stan Shebs <shebs@andros.cygnus.com>
4490 Merge in support for Mac MPW as a host.
4491 (Old change descriptions retained for informational value.)
4493 * mpw-config.in (archname): Compute from the config.
4494 (BFD_MACHINES, ARCHDEFS): Put into mk.tmp.
4496 * mpw-config.in (target_arch): Compute from canonical target.
4497 (m68k, mips, powerpc, sparc): Add architectures.
4498 * mpw-make.in (disassemble.c.o): Add.
4499 (ALL_CFLAGS): Remove special flags (-mc68020 -mc68881 -model far).
4501 * mpw-config.in (BFD_MACHINES): Set to a default value.
4502 * mpw-make.in (BFD_MACHINES): Remove wired-in value.
4504 * mpw-make.in (CSEARCH): Add extra-include to search path.
4506 * mpw-config.in (varargs.h): Don't create.
4507 (sysdep.h): Create using forward-include.
4508 * mpw-make.in (CSEARCH): Add include/mpw to search path.
4510 * mpw-config.in: New file, MPW version of configure.in.
4511 * mpw-make.in: New file, MPW version of Makefile.in.
4513 Fri Mar 31 14:23:38 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4515 * alpha-dis.c (print_insn_alpha): Put empty statement after
4518 Tue Mar 21 10:51:40 1995 Jeff Law (law@snake.cs.utah.edu)
4520 * hppa-dis.c (sign_extend): Delete, redundant with libhppa.h version.
4521 (low_sign_extend): Likewise.
4522 (get_field): Delete unused function.
4523 (set_field, deposit_14, deposit_21): Likewise.
4525 Fri Mar 17 15:55:53 1995 J.T. Conklin <jtc@rtl.cygnus.com>
4527 * i386-dis.c: Support for more pentium opcodes. From Guy Harris
4530 Tue Mar 14 00:52:57 1995 Ken Raeburn (raeburn@kr-pc.cygnus.com)
4532 Sat Feb 11 17:22:41 1995 Klaus Kaempf (kkaempf@didymus.rmi.de)
4534 * alpha-opc.h (OSF_ASMCODE): define
4535 print pal-code names as defined in App C of the
4536 Alpha Architecture Reference Manual
4538 * alpha-dis.c: cleaned up output
4539 print stylized code forms as defined in App A.4.3 of the
4540 Alpha Architecture Reference Manual
4542 Wed Mar 8 15:21:14 1995 Ian Lance Taylor <ian@cygnus.com>
4544 * mips-opc.c: Add new mips4 instructions. Don't set INSN_RFE for
4546 * mips-dis.c (print_insn_arg): Handle new argument types 'h', 'R',
4549 Wed Mar 8 02:54:05 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4551 * m68k-dis.c (opcode): New function. Returns address of opcode
4552 table entry given index, even if the opcode table was split to
4553 work around gcc bugs.
4554 (print_insn_m68k): Call opcode instead of referencing m68k_opcodes
4556 (BREAK_UP_BIG_DECL): Make secondary array static and const.
4557 (reg_names): Now const.
4558 (print_insn_arg): Arrays cacheFieldName and names now const.
4559 (print_indexed): Array scales now const.
4561 Tue Mar 7 16:41:21 1995 Ian Lance Taylor <ian@cygnus.com>
4563 * ppc-opc.c: Sort recently added instructions by minor opcode
4564 number within major opcode number.
4566 Mon Mar 6 10:04:36 1995 Jeff Law (law@snake.cs.utah.edu)
4568 * hppa-dis.c: Include libhppa.h.
4570 Fri Feb 24 19:15:36 1995 Ian Lance Taylor <ian@cygnus.com>
4572 * mips-opc.c: Change dli to use M_DLI, and add dla.
4574 Mon Feb 20 23:54:38 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4576 * Makefile.in (ALL_MACHINES): Add w65-dis.o.
4578 Thu Feb 16 17:34:41 1995 Ian Lance Taylor <ian@cygnus.com>
4580 * mips-opc.c: Add r4650 mul instruction.
4582 Wed Feb 15 15:45:20 1995 Ian Lance Taylor <ian@cygnus.com>
4584 * mips-opc.c: Add uld and usd macros for unaligned double load and
4587 Tue Feb 14 13:17:37 1995 Michael Meissner <meissner@tiktok.cygnus.com>
4589 * ppc-opc.c (powerpc_opcodes): Add 403GA opcodes rfci, dccci,
4590 mfdcr, mtdcr, icbt, iccci.
4592 Thu Feb 9 12:28:13 1995 Stan Shebs <shebs@andros.cygnus.com>
4594 * i960-dis.c (struct tabent, struct sparse_tabent): Change the
4595 signed char fields to shorts, more portable.
4597 Wed Feb 8 17:29:29 1995 Stan Shebs <shebs@andros.cygnus.com>
4599 * i960-dis.c (struct tabent, struct sparse_tabent): Declare the
4600 char fields as signed chars, since they may have negative values.
4602 Mon Feb 6 10:52:06 1995 J.T. Conklin <jtc@rtl.cygnus.com>
4604 * i386-dis.c (dis386_twobyte): Add cpuid, From Charles Hannum
4605 (mycroft@netbsd.org).
4607 Mon Jan 30 12:38:00 1995 Ian Lance Taylor <ian@cygnus.com>
4609 From "Logg, Ed" <elogg@ea.com>:
4610 * ppc-opc.c (extract_bdm): Correct parenthezisation.
4611 * ppc-dis.c (print_insn_powerpc): Print .long before unrecognized
4614 Thu Jan 26 18:32:08 1995 Ian Lance Taylor <ian@cygnus.com>
4616 * ppc-opc.c: Changes based on patch from David Edelsohn
4617 <edelsohn@mhpcc.edu>.
4618 (powerpc_operands): Add operands SPRBAT and SPRG. Split TBR out of
4621 (insert_tbr): New static function.
4622 (extract_tbr): New static function.
4623 (XFXFXM_MASK, XFXM): Define.
4624 (XSPRBAT_MASK, XSPRG_MASK): Define.
4625 (powerpc_opcodes): Add instructions to access special registers by
4626 name. Add mtcr and mftbu.
4628 Tue Jan 17 10:56:43 1995 Ian Lance Taylor <ian@sanguine.cygnus.com>
4630 * mips-opc.c (P3): Define.
4631 (mips_opcodes): Add mad and madu.
4633 Sun Jan 15 16:32:59 1995 Steve Chamberlain <sac@splat>
4635 * configure.in: Add W65 support.
4636 * disassemble.c: Likewise.
4637 * w65-opc.h, w65-dis.c: New files.
4639 Wed Dec 28 22:15:33 1994 Steve Chamberlain (sac@jonny.cygnus.com)
4641 * h8300-dis.c (bfd_h8_disassemble): Add support for 2 bit
4644 Tue Dec 20 11:25:12 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4646 * mips-opc.c: Add dli as a synonym for li.
4648 Thu Dec 8 18:23:31 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
4650 * alpha-dis.c (print_insn_alpha): Handle call_pal instruction, and
4651 print something for reserved opcode values, even if it won't
4654 * mips-dis.c (_print_insn_mips): When initializing, shift right
4655 and mask, to avoid sign extension problems on the Alpha.
4657 * m68k-dis.c (print_insn_arg, case 'J'): Handle buscr and pcr
4660 Wed Nov 23 22:34:51 1994 Steve Chamberlain (sac@jonny.cygnus.com)
4662 * sh-opc.h (mov.l gbr): Get direction right.
4663 * sh-dis.c (print_insn_shx): New function.
4664 (print_insn_shl, print_insn_sh): Call print_insn_shx to
4665 print opcodes with right byte order.
4667 Thu Nov 3 19:32:22 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
4669 * ns32k-dis.c (struct ns32k_option): Renamed from struct option,
4670 to avoid conflicts with getopt.
4672 Mon Oct 31 18:48:10 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4674 * hppa-dis.c (print_insn_hppa): Read the instruction using
4675 bfd_getb32, so that it works on a little endian or 64 bit host.
4676 Remove unused local variable op.
4678 Tue Oct 25 17:07:57 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4680 * mips-opc.c: Use or instead of addu for pseudo-op move, since
4681 addu does not work correctly if -mips3.
4683 Wed Oct 19 13:40:16 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4685 * a29k-dis.c (print_special): Add special register names defined
4686 on 29030, 29040 and 29050.
4687 (print_insn): Handle new operand type 'I'.
4689 Wed Oct 12 11:59:55 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4691 * Makefile.in (INSTALL): Use top level install.sh script.
4693 Wed Oct 5 19:16:29 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4695 * sparc-dis.c: Rewrite to use bitfields, rather than a union, so
4696 that it works on a little endian host.
4698 Tue Oct 4 12:14:21 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4700 * configure.in: Use ${config_shell} when running config.bfd.
4702 Wed Sep 21 18:49:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4704 * mips-opc.c (mips_opcodes): "dabs" is only available with -mips3.
4706 Thu Sep 15 16:30:22 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4708 * a29k-dis.c (print_insn): Print the opcode.
4710 Wed Sep 14 17:52:14 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4712 * mips-opc.c (mips_opcodes): Set WR_t for sc and scd.
4714 Sun Sep 11 22:32:17 1994 Jeff Law (law@snake.cs.utah.edu)
4716 * hppa-dis.c (reg_names): Use r26-r23 for arg0-arg3.
4718 Tue Sep 6 11:37:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4720 * mips-opc.c: Set INSN_STORE_MEMORY flag for all instructions
4721 which store a value into memory.
4723 Sun Sep 04 17:58:10 1994 Richard Earnshaw (rwe@pegasus.esprit.ec.org)
4725 * configure.in, Makefile.in, disassemble.c: Add support for the ARM.
4726 * arm-dis.c, arm-opc.h: New files.
4728 Fri Aug 5 14:00:05 1994 Stan Shebs (shebs@andros.cygnus.com)
4730 * Makefile.in (ns32k-dis.o): Add dependency.
4731 * ns32k-dis.c (print_insn_arg): Declare initialized local as
4732 string, not as array of chars.
4734 Thu Jul 28 18:14:16 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4736 * sparc-dis.c (print_insn_sparc): Handle new operand type 'x'.
4738 * sparc-opc.c: Added sparclite extended FP operations, and
4739 versions of v9 impdep* instructions permitting specification of
4742 Tue Jul 26 16:36:03 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4744 * i960-dis.c (reg_names): Now const.
4745 (struct sparse_tabent): New type, copied from array type in mem
4747 (ctrl): Local static array ctrl_tab now const.
4748 (cobr): Local static array cobr_tab now const.
4749 (mem): Local variables reg1, reg2, reg3 now point to const. Local
4750 static variable mem_tab no longer explicitly initialized. Changed
4751 mem_init to const array of struct sparse_tabent.
4752 (reg): Local static variable reg_tab no longer explicitly
4753 initialized. Changed reg_init to const array of struct
4755 (ea): Local static array scale_tab now const.
4757 * i960-dis.c (reg): Added i960JX instructions to reg_init table.
4760 Tue Jul 19 21:00:00 1994 DJ Delorie (dj@ctron.com)
4762 * configure.bat: the disassember needs to be enabled for
4763 "objdump -d" to work in djgpp.
4765 Wed Jul 13 18:01:58 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4767 * ns32k-dis.c: Deleted all code in "#ifdef GDB".
4768 (invalid_float): Enabled general version, doesn't require running
4769 on ns32k host. Changed to take char* argument, and test for
4770 explicitly specified sizes, instead of using sizeof() on host CPU
4772 (INVALID_FLOAT): Cast first argument.
4773 (opt_u, opt_U, opt_O, opt_C, opt_S, list_P532, list_M532,
4774 list_P032, list_M032): Now const.
4775 (optlist, list_search): Made appropriate arguments now point to
4777 (print_insn_arg): Changed static array of one-character-string
4778 pointers into a static const array of characters; fixed sprintf
4779 statement accordingly.
4781 Sun Jul 10 00:27:47 1994 Ian Dall (dall@hfrd.dsto.gov.au)
4783 * opcodes/ns32k-dis.c: Semi-new file. Had apparently been dropped
4784 from distribution. A ns32k-dis.c from a previous distribution has
4785 been brought up to date and supports the new interface.
4787 * disassemble.c: define ARCH_ns32k and add case bfd_arch_ns32k.
4789 * configure.in: add bfd_ns32k_arch target support.
4791 * Makefile.in: add ns32k-dis.o to ALL_MACHINES.
4792 Add ns32k-dis.c to CFILES. Add dependencies for ns32k-dis.o.
4794 Wed Jun 29 22:10:37 1994 Steve Chamberlain (sac@cygnus.com)
4796 * h8300-dis.c (bfd_h8_disassemble): Get 16bit branch
4799 Tue Jun 28 13:22:06 1994 Stan Shebs (shebs@andros.cygnus.com)
4801 * h8300-dis.c, mips-dis.c: Don't use true and false.
4803 Thu Jun 23 12:53:19 1994 David J. Mackenzie (djm@rtl.cygnus.com)
4805 * configure.in: Change --with-targets to --enable-targets.
4807 Wed Jun 22 13:38:32 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4809 * mips-dis.c (_print_insn_mips): Build a static hash table mapping
4810 opcodes to the first instruction with that opcode, to speed
4811 disassembly of large files. From ralphc@pyramid.com (Ralph
4814 Tue Jun 7 12:49:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4816 * Makefile.in (mostlyclean): Fix typo (was mostyclean).
4818 Wed May 11 22:32:00 1994 DJ Delorie (dj@ctron.com)
4820 * configure.bat: update to latest makefile.in
4822 Sat May 7 17:13:21 1994 Steve Chamberlain (sac@cygnus.com)
4824 * a29k-dis.c (print_insn): Print 'x' type operand in hex.
4825 * h8300-dis.c (bfd_h8_disassemble): Print 16bit rels correctly.
4826 * sh-dis.c (print_insn_sh): Don't recur endlessly if delay
4827 slot insn is in a delay slot.
4828 * z8k-opc.h: (resflg): Fix patterns.
4829 * h8500-opc.h Fix CR insn patterns.
4831 Fri May 6 14:34:46 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4833 * ppc-opc.c (powerpc_opcodes): Put PowerPC versions of "cmp" and
4834 "cmpl" before POWER versions, so that gas -many uses them.
4836 Thu Apr 28 18:32:36 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4838 * disassemble.c: New file.
4839 * Makefile.in (OFILES): Add disassemble.o.
4840 (disassemble.o): Provide dependencies; compile with $(ARCHDEFS).
4841 * configure.in: Define ARCHDEFS in Makefile. Code taken from
4842 binutils/configure.in.
4844 * m68k-dis.c (print_insn_m68k): If F_ALIAS flag is set, skip the
4845 opcode being examined.
4847 Thu Apr 21 17:08:40 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4849 * ppc-opc.c (powerpc_operands): Added RAL, RAM and RAS.
4850 (insert_ral, insert_ram, insert_ras): New functions.
4851 (powerpc_opcodes): Use RAL for load with update, RAM for lmw, and
4852 RAS for store with update.
4854 Sat Apr 16 23:41:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4856 * ppc-opc.c (powerpc_opcodes): Correct fcir. From David Edelsohn
4857 (edelsohn@npac.syr.edu).
4859 Wed Apr 6 17:11:45 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4861 * mips-opc.c (mips_opcodes): Correct operands of "nor" with an
4864 Mon Apr 4 16:30:46 1994 Doug Evans (dje@canuck.cygnus.com)
4866 * sparc-opc.c (sparc_opcodes): Fix "rd %fprs,%l0".
4868 Mon Apr 4 13:22:00 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4870 * ppc-opc.c (powerpc_operands): The signedp field has been
4871 removed, so don't initialize it. Set the PPC_OPERAND_SIGNED flag
4872 instead. Add new operand SISIGNOPT.
4873 (powerpc_opcodes): For lis, liu, addis, and cau use SISIGNOPT.
4874 Based on patch from David Edelsohn (edelsohn@npac.syr.edu).
4875 * ppc-dis.c (print_insn_powerpc): Check PPC_OPERAND_SIGNED rather
4878 Wed Mar 30 00:31:49 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4880 * i386-dis.c (struct private): Renamed to dis_private. `private'
4881 is a reserved word for dynix cc.
4883 Mon Mar 28 13:00:15 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4885 * configure.in: Change error message to refer to bfd/config.bfd
4886 rather than bfd/configure.in.
4888 Mon Mar 28 12:28:30 1994 David Edelsohn (edelsohn@npac.syr.edu)
4890 * ppc-opc.c: Define POWER2 as short alias flag.
4891 (powerpc_opcodes): Add POWER/2 opcodes lfq*, stfq*, fcir[z], and
4894 Wed Mar 23 12:23:05 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4896 * i960-dis.c (print_insn_i960): Don't read a second word for
4897 opcodes 0, 1, 2 and 3.
4899 Wed Mar 16 15:37:58 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4901 * configure.in: Don't build m68881-ext.o for bfd_m68k_arch.
4903 Mon Mar 14 14:53:50 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4905 * m68881-ext.c: Removed; no longer used.
4906 * Makefile.in: Changed accordingly.
4908 * m68k-dis.c (ext_format_68881): Don't declare.
4909 (print_insn_m68k): If an instruction uses place 'i', it uses at
4910 least four fixed bytes.
4911 (print_insn_arg): Don't bump p by 2 for case 'I', place 'i'. For
4912 extended float, convert to double using floatformat_to_double, not
4913 ieee_extended_to_double, and fetch the data before converting it.
4915 Tue Mar 8 18:12:25 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4917 * mips-opc.c: It's sqrt.s, not sqrt.w. From
4918 davidj@ICSI.Berkeley.EDU (David Johnson).
4920 Tue Feb 8 16:55:27 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4922 * ppc-opc.c (powerpc_opcodes): The POWER uses bdn[l][a] where the
4923 PowerPC uses bdnz[l][a].
4925 Tue Feb 8 00:32:28 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4927 * dis-buf.c, i386-dis.c: Include sysdep.h.
4929 Mon Feb 7 19:22:23 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4931 * configure.in (bfd_powerpc_arch): Use ppc-dis.o and ppc-opc.o.
4933 * ppc-opc.c (powerpc_opcodes): Mark POWER instructions supported
4934 by Motorola PowerPC 601 with PPC_OPCODE_601.
4935 * ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc):
4936 Disassemble Motorola PowerPC 601 instructions as well as normal
4937 PowerPC instructions.
4939 Sun Feb 6 07:45:17 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
4941 * i960-dis.c (reg, mem): Just use a static array instead of
4944 Sat Feb 5 00:04:02 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
4946 * hppa-dis.c (print_insn_hppa): For '?' and '@' only adjust the
4947 condition name index if this is for a negated condition.
4949 * hppa-dis.c (print_insn_hppa): No space before 'H' operand.
4950 Floating point format for 'H' operand is backwards from normal
4951 case (0 == double, 1 == single). For '4', '6', '7', '9', and '8'
4952 operands (fmpyadd and fmpysub), handle bizarre register
4953 translation correctly for single precision format.
4955 * hppa-dis.c (print_insn_hppa): Do not emit a space after 'F'
4956 or 'I' operands if the next format specifier is 'M' (fcmp
4957 condition completer).
4959 Feb 4 23:38:03 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4961 * ppc-opc.c (powerpc_operands): New operand type MBE to handle a
4962 single number giving a bitmask for the MB and ME fields of an M
4963 form instruction. Change NB to accept 32, and turn it into 0;
4964 also turn 0 into 32 when disassembling. Seperated SH from NB.
4965 (insert_mbe, extract_mbe): New functions.
4966 (insert_nb, extract_nb): New functions.
4967 (SC_MASK): Mask out SA and LK bits.
4968 (powerpc_opcodes): Change "cal" to use RT, D, RA rather than RT,
4969 RA, SI. Change "liu" and "cau" to use UI rather than SI. Mark
4970 "bctr" and "bctrl" as accepted by POWER. Change "rlwimi",
4971 "rlimi", "rlwimi.", "rlimi.", "rlwinm", "rlinm", "rlwinm.",
4972 "rlinm.", "rlmi", "rlmi.", "rlwnm", "rlnm", "rlwnm.", "rlnm." to
4973 use MBE rather than MB. Add "mfmq" and "mtmq" POWER instructions.
4974 (powerpc_macros): Define table of macro definitions.
4975 (powerpc_num_macros): Define.
4977 * ppc-dis.c (print_insn_powerpc): Don't skip optional operands
4978 if PPC_OPERAND_NEXT is set.
4980 Sat Jan 22 23:10:07 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4982 * i960-dis.c (print_insn_i960): Make buffer bfd_byte instead of
4983 char. Retrieve contents using bfd_getl32 instead of shifting.
4985 Fri Jan 21 19:01:39 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4987 * ppc-opc.c: New file. Opcode table for PowerPC, including
4988 opcodes for POWER (RS/6000).
4989 * ppc-dis.c: New file. PowerPC and Power (RS/6000) disassembler.
4990 * Makefile.in (ALL_MACHINES): Add ppc-dis.o and ppc-opc.o.
4991 (CFILES): Add ppc-dis.c.
4992 (ppc-dis.o, ppc-opc.o): New targets.
4993 * configure.in: Build ppc-dis.o and ppc-opc.o for bfd_rs6000_arch.
4995 Mon Jan 17 20:05:49 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
4997 * hppa-dis.c (print_insn_hppa): Handle 'N' in assembler template.
4998 No space before 'u', 'f', or 'N'.
5000 Sun Jan 16 14:20:16 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
5002 * i386-dis.c (print_insn_i386): Add FIXME comment regarding reading
5003 farther than we should.
5005 * i386-dis.c (dis386): Use Yb and Yv for scasb and scasS.
5007 Thu Jan 6 12:38:05 1994 David J. Mackenzie (djm@thepub.cygnus.com)
5009 * sparc-dis.c m68k-dis.c alpha-dis.c a29k-dis.c: Fix comments.
5011 Wed Jan 5 11:56:21 1994 David J. Mackenzie (djm@thepub.cygnus.com)
5013 * i960-dis.c (print_insn_i960): Only read word2 if the instruction
5014 needs it, to prevent reading past the end of a section.
5016 Wed Nov 17 17:20:12 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5018 * mips-opc.h: Use macro for j instruction, to support SVR4 PIC.
5019 Removed t,A case for la; always use t,A(b) case.
5021 Mon Nov 8 12:37:36 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5023 From Ted Lemen <mellon@pepper.ncd.com>
5024 * mips-dis.c (print_insn_arg): Handle 'k'.
5025 * mips-opc.c: Make cache use k, not t.
5027 Sun Nov 7 23:52:34 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
5029 * alpha-opc.h, alpha-dis.c (print_insn_alpha): Add
5030 FLOAT_MEMORY_FORMAT_CODE, FLOAT_BRANCH_FORMAT_CODE, correct
5031 FLOAT_FORMAT_CODE to put out floating point register names.
5033 Mon Nov 1 18:17:51 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5035 * mips-opc.c: Use macros for jal variants, to support SVR4 PIC.
5037 Thu Oct 28 17:42:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5039 * a29k-dis.c (print_insn): Use 0x%08x, not 0x%8x.
5041 Wed Oct 27 11:48:01 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5043 * mips-opc.c (dsll, dsra, dsrl): Added '>' cases for shift counts
5044 larger than 32. Moved dsxx32 variants first for disassembler.
5046 Mon Oct 25 11:33:14 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
5048 * z8kgen.c, z8k-opc.h: Add full lda information.
5050 Tue Oct 19 12:39:25 1993 Jeffrey A Law (law@cs.utah.edu)
5052 * hppa-dis.c (print_insn_hppa): Do not emit a space after
5053 movb instructions. Any necessary space will be emitted by
5054 the code to handle nullification completers.
5056 Wed Oct 13 16:19:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5058 * mips-opc.c: Moved l.d down so that it disassembles as ldc1.
5060 Fri Oct 8 02:34:21 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
5062 * alpha-opc.h: Add ldl_l, fix typo for ldq_u.
5063 * alpha-dis.c (print_insn_alpha): Add code for PAL_FORMAT_CODE.
5065 Tue Oct 5 17:47:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5067 * mips-opc.c: Correct lwu opcode value (book had it wrong).
5069 Thu Sep 30 11:26:18 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
5071 * z8k-dis.c (FETCH_DATA): get just the right amount of data.
5072 (unpack_instr): Cope with ARG_IMM4M1 type instructions.
5074 Wed Sep 29 16:24:49 1993 K. Richard Pixley (rich@sendai.cygnus.com)
5076 * m88k-dis.c (m88kdis): comment change. Remove space after
5078 (printop): handle new arg types DEC and XREG for m88110.
5080 Tue Sep 28 19:20:16 1993 Jeffrey A Law (law@snake.cs.utah.edu)
5082 * hppa-dis.c (print_insn_hppa): Handle 'z' operand
5083 type for absolute branch addresses. Delete special
5084 "ble" and "be" code in 'W' operand code.
5086 Fri Sep 24 14:08:33 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5088 * mips-opc.c: Set hazard information correctly for branch
5089 likely instructions.
5091 Fri Sep 17 04:41:17 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
5093 * alpha-dis.c (print_insn_alpha), alpha-opc.h: Fix bugs, use
5094 info->fprintf_func for printing and info->print_address_func for
5097 Wed Sep 15 12:12:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5099 * mips-opc.c: Set INSN_TRAP for tXX instructions.
5101 Thu Sep 9 10:11:27 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5103 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson):
5104 Corrected second case of "b" for disassembler.
5106 Tue Sep 7 14:25:15 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5108 * mips-dis.c, m88k-dis.c: Don't include libbfd.h. Changed calls
5109 to BFD swapping routines to correspond to BFD name changes.
5111 Thu Sep 2 10:35:25 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5113 * mips-opc.c: Change div machine instruction to be z,s,t rather
5114 than s,t. Change div macro to be d,v,t rather than d,s,t.
5115 Likewise for divu, ddiv, ddivu. Added z,s,t case for drem, dremu,
5116 rem and remu which generates only the corresponding div
5117 instruction. This is for compatibility with the MIPS assembler,
5118 which only generates the simple machine instruction when an
5119 explicit destination of $0 is used.
5120 * mips-dis.c (print_insn_arg): Handle 'z' (always register zero).
5122 Thu Aug 26 17:41:44 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5124 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Set
5125 WR_31 hazard for bal, bgezal, bltzal.
5127 Thu Aug 26 17:20:02 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5129 * hppa-dis.c (print_insn_hppa): Use print function
5130 from within the disassemble_info, not fprintf_filtered.
5132 Wed Aug 25 13:51:40 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5134 * hppa-dis.c (print_insn_hppa): Handle '|' like '>'. (From Jeff
5135 Law, law@cs.utah.edu.)
5137 Mon Aug 23 12:44:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5139 * mips-opc.c ("absu"): Removed.
5142 Fri Aug 20 10:52:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5144 * mips-opc.c: Added r6000 and r4000 instructions and macros.
5145 Changed hazard information to distinguish between memory load
5146 delays and coprocessor load delays.
5148 Wed Aug 18 15:39:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5150 * mips-opc.c: li.d uses "T,L", not "S,F". Added li.s.
5152 Tue Aug 17 09:44:42 1993 David J. Mackenzie (djm@thepub.cygnus.com)
5154 * configure.in: Don't pass cpu to config.bfd.
5156 Tue Aug 17 12:23:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5158 * m88k-dis.c (m88kdis): Make class unsigned.
5160 Thu Aug 12 15:08:18 1993 Ian Lance Taylor (ian@cygnus.com)
5162 * alpha-dis.c (print_insn_alpha): One branch format case was
5163 missing the instruction name.
5165 Wed Aug 11 19:29:39 1993 David J. Mackenzie (djm@thepub.cygnus.com)
5167 * Makefile.in (ALL_MACHINES): Renamed from DIS_LIBS.
5168 Add the arch-specific auxiliary files.
5169 (OFILES): Remove the arch-specific auxiliary files
5170 and use BFD_MACHINES instead of DIS_LIBS.
5171 * configure.in: Set BFD_MACHINES based on --with-targets option.
5173 Thu Aug 12 12:04:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5175 * mips-opc.c: Added lwc1 E,A(b) to go with lwc1 T,A(b). Similarly
5178 Sun Aug 8 15:09:30 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5180 * sparc-opc.c: Change CONST to const to deal with gcc
5181 -Dconst=__const -traditional.
5183 Fri Aug 6 10:58:55 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5185 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Took
5186 coprocessor instructions out of #if 0, and made them use new
5189 Thu Aug 5 17:11:06 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5191 * sparc-dis.c: Include ansidecl.h before opcodes/sparc.h.
5193 Fri Jul 30 18:48:15 1993 John Gilmore (gnu@cygnus.com)
5195 * sparc-opc.c: Add F_JSR, F_UNBR, or F_CONDBR flags to each branch
5196 instruction, for use by the disassembler.
5198 * sparc-dis.c (SEX): Add sign extension macro. Replace many
5199 hand-coded sign extensions that depended on 32-bit host ints.
5200 FIXME, we still depend on big-endian host bitfield ordering.
5201 (sparc_print_insn): Set the insn_info_valid field, and the
5202 other fields that describe the instruction being printed.
5204 Tue Jul 27 17:04:58 1993 Jim Wilson (wilson@sphagnum.cygnus.com)
5206 * sparc-opc.c (call): Accept all 6 addressing modes valid for
5207 `jmp' instead of just one of them.
5209 Wed Jul 21 11:43:32 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
5211 * hppa-dis.c: Move floating registers from reg_names to fp_reg_names.
5212 (fput_fp_reg_r): Renamed from fput_reg_r.
5213 (fput_fp_reg): New function.
5214 (print_insn_hppa): Use fput_fp_reg{,_r} where appropriate.
5216 * hppa-dis.c (print_insn_hppa, cases 'a', 'd'): Print space afterwards.
5218 * hppa-dis.c (print_insn_hppa, case 'd'): Use GET_COND not GET_FIELD.
5220 Mon Jul 19 13:52:21 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
5222 * hppa-dis.c (print_insn_hppa): Use extract_5r_store for 'r'.
5224 * hppa-dis.c (print_insn_hppa, case '>'): If next character is 'n',
5225 don't output a space.
5227 * hppa-dis.c (float_format_names): 10 is undefined, and 11 is quad.
5229 Sun Jul 18 16:30:02 1993 Jim Kingdon (kingdon@rtl.cygnus.com)
5231 * mips-opc.c: New file, containing opcode table from
5232 ../include/opcode/mips.h.
5233 * Makefile.in: Add it.
5235 Thu Jul 15 12:37:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5237 * m88k-dis.c: New file, moved in from gdb and changed to use the
5238 new dis-asm.h disassembler interface.
5239 * Makefile.in (DIS_LIBS): Added m88k-dis.o.
5240 (m88k-dis.o): New target.
5242 Tue Jul 13 10:04:16 1993 Ian Lance Taylor (ian@cygnus.com)
5244 * mips-dis.c (print_insn_arg, _print_insn_mips): Made pointer to
5245 argument string const char * to correspond to opcode/mips.h.
5247 Tue Jul 6 15:18:37 1993 Ian Lance Taylor (ian@cygnus.com)
5249 * mips-dis.c: Updated to account for name changes in new version
5251 * Makefile.in: Added header file dependencies.
5253 Sat Jul 3 23:47:56 1993 Doug Evans (dje@canuck.cygnus.com)
5255 * h8300-dis.c (bfd_h8_disassemble): Correct fetching of instruction.
5257 Thu Jul 1 12:23:38 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5259 * m68k-dis.c (NEXTWORD, NEXTLONG): Use ((x) ^ 0x8000) - 0x8000 to sign
5260 extend, rather than shifts.
5262 Sun Jun 20 20:56:56 1993 Ken Raeburn (raeburn@poseidon.cygnus.com)
5264 * Makefile.in: Undo 15 June change.
5266 Fri Jun 18 14:15:15 1993 Per Bothner (bothner@deneb.cygnus.com)
5268 * m68k-dis.c (print_insn_arg): Change return value to byte count
5270 * m68k-dis.c: Re-write to detect invalid operands before
5271 printing anything, so we can handle this the same way we
5272 handle invalid opcodes.
5274 Thu Jun 17 15:01:36 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
5276 * sh-dis.c, sh-opc.h: Understand some more opcodes.
5278 Wed Jun 16 13:48:05 1993 Ian Lance Taylor (ian@cygnus.com)
5280 * hppa-dis.c: Include <ansidecl.h> and sysdep.h before other
5283 Tue Jun 15 21:45:26 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5285 * sparc-dis.c: Don't declare qsort, since sysdep.h might.
5287 * configure.in: Do make sysdep.h link.
5288 * Makefile.in: Search ../include. Don't search ../bfd.
5290 Tue Jun 15 13:36:10 1993 Stu Grossman (grossman@cygnus.com)
5292 Changes from Jeff Law, law@cs.utah.edu:
5293 * hppa-dis.c: Fix typo. 'a' and 'd' were reversed.
5294 Do not print a space before the completers specified by
5297 Fri Jun 11 18:40:21 1993 Ken Raeburn (raeburn@cygnus.com)
5299 * mips-dis.c: No longer need to bomb out if HOST_64_BIT is
5300 defined, since gdb has been fixed.
5302 Changes from Jeff Law, law@cs.utah.edu:
5303 * hppa-dis.c (print_insn_hppa): Last argument to fput_reg,
5304 fput_reg_r, fput_creg, fput_const, and fputs_filtered should
5305 be a *disassemble_info, not a *FILE.
5306 * hppa-dis.c: Support 'd', '!', and 'a'.
5307 * hppa-dis.c: Support 's' to extract a 2 bit space register.
5308 * hppa-dis.c: Delete cases which are no longer needed.
5310 Fri Jun 11 07:53:48 1993 Jim Kingdon (kingdon@cygnus.com)
5312 * m68k-dis.c (print_insn_{m68k,arg}): Add MMU codes.
5314 Tue Jun 8 12:25:01 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
5316 * h8300-dis.c: New file, removed from bfd/cpu-h8300.c, with
5319 Mon Jun 7 12:58:49 1993 Per Bothner (bothner@rtl.cygnus.com)
5321 * Makefile.in (CSEARCH): Add -I../bfd for sysdep.h and bfd.h.
5322 * configure.in: No longer need to configure to get sysdep.h.
5324 Thu Jun 3 15:56:49 1993 Stu Grossman (grossman@cygnus.com)
5326 * Patches from Jeffrey Law <law@cs.utah.edu>.
5327 * hppa-dis.c: Support 'I', 'J', and 'K' in output
5328 templates for 1.1 FP computational instructions.
5330 Tue May 25 13:05:48 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5332 * h8500-dis.c (print_insn_h8500): Address argument is type
5334 * z8k-dis.c (print_insn_z8k, print_insn_z8001, print_insn_z8002):
5337 * h8500-opc.h (addr_class_type): No comma at end of enumerator.
5338 * sh-opc.h (sh_nibble_type, sh_arg_type): Ditto.
5340 * sparc-dis.c (compare_opcodes): Move static declaration to
5343 Fri May 21 14:17:37 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
5345 * sparc-dis.c (print_insn_sparc): Implement 'n' argument for unimp
5346 instruction, remove unimp hack from 'l' argument.
5348 Wed May 19 15:35:54 1993 Stu Grossman (grossman@cygnus.com)
5350 * z8k-dis.c (fetch_data): Use unsigned char to make ancient gcc's
5353 Fri May 14 15:22:46 1993 Ian Lance Taylor (ian@cygnus.com)
5355 * Based on patches from davidj@ICSI.Berkeley.EDU (David Johnson):
5356 * mips-dis.c (print_insn_arg): Handle 'C' for general coprocessor
5359 Fri May 14 00:09:14 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5361 * hppa-dis.c: Include dis-asm.h before sysdep.h. Changed some
5362 arrays of string pointers to 2-d arrays of chars, to save
5365 Thu May 6 20:51:17 1993 Fred Fish (fnf@cygnus.com)
5367 * a29k-dis.c, alpha-dis.c, i960-dis.c, sparc-dis.c, z8k-dis.c:
5368 Cast second arg to read_memory_func to "bfd_byte *", as necessary.
5370 Tue May 4 20:31:10 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5372 * hppa-dis.c: New file from Utah, adapted to new disassembler
5374 * Makefile.in: Include it.
5376 Mon Apr 26 18:17:42 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5378 * sh-dis.c, sh-opc.h: New files.
5380 Fri Apr 23 18:51:22 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5382 * alpha-dis.c, alpha-opc.h: New files.
5384 Tue Apr 6 12:54:08 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
5386 * mips-dis.c: Sign extend 'j' and 'b' arguments, delta is a signed
5389 Mon Apr 5 17:37:37 1993 John Gilmore (gnu@cygnus.com)
5391 * sparc-dis.c: Make "ta" the default trap instruction, "t" the alias.
5393 Fri Apr 2 07:24:27 1993 Ian Lance Taylor (ian@cygnus.com)
5395 * a29k-dis.c, sparc-dis.c, sparc-opc.c: Use CONST rather than
5398 Thu Apr 1 11:20:43 1993 Jim Kingdon (kingdon@cygnus.com)
5400 * sparc-dis.c: Use fprintf_func a few places where I forgot,
5401 and double percent signs a few places.
5403 * a29k-dis.c, i960-dis.c: New, merged from gdb and binutils.
5405 * i386-dis.c, m68k-dis.c, mips-dis.c, sparc-dis.c:
5406 Use info->print_address_func not print_address.
5408 * dis-buf.c (generic_print_address): New function.
5410 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5412 * Makefile.in: Add sparc-dis.c.
5413 sparc-dis.c: New file, merges binutils and gdb versions as follows:
5415 Add `add' instruction to the set that get checked
5416 for a preceding `sethi' in order to print an absolute address.
5417 * (print_insn): Disassembly prefers real instructions.
5418 (is_delayed_branch): Speed up.
5419 * sparc-opcode.h: Add ALIAS bit to aliases. Fix up opcode tables.
5420 Still missing some float ops, and needs testing.
5421 * sparc-pinsn.c (print_insn): Eliminate 'set' test, subsumed by
5422 F_ALIAS. Use printf, not fprintf, when not passing a file
5424 (compare_opcodes): Check that identical instructions have
5425 identical opcodes, complain otherwise.
5428 * Include reg_names.
5430 Use dis-asm.h/read_memory_func interface.
5432 Wed Mar 31 20:49:06 1993 K. Richard Pixley (rich@rtl.cygnus.com)
5434 * h8500-dis.c, i386-dis.c, m68k-dis.c, z8k-dis.c (fetch_data):
5435 deliberately return non-zero to setjmp from longjmp. Otherwise
5436 this code fails to compile.
5438 Wed Mar 31 17:04:31 1993 Stu Grossman (grossman@cygnus.com)
5440 * m68k-dis.c: Fix prototype for fetch_arg().
5442 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5444 * dis-buf.c: New file, for new read_memory_func interface.
5445 Makefile.in (OFILES): Include it.
5446 m68k-dis.c, i386-dis.c, h8500-dis.c, mips-dis.c, z8k-dis.c:
5447 Use new read_memory_func interface.
5449 Mon Mar 29 14:02:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5451 * h8500-dis.c (print_insn_h8500): Get sign of fp offsets right.
5452 * h8500-opc.h: Fix couple of opcodes.
5454 Wed Mar 24 02:03:36 1993 david d `zoo' zuhn (zoo at poseidon.cygnus.com)
5456 * Makefile.in: add dvi & installcheck targets
5458 Mon Mar 22 18:55:04 1993 John Gilmore (gnu@cygnus.com)
5460 * Makefile.in: Update for h8500-dis.c.
5462 Fri Mar 19 14:27:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5464 * h8500-dis.c, h8500-opc.h: New files
5466 Thu Mar 18 14:12:37 1993 Per Bothner (bothner@rtl.cygnus.com)
5468 * mips-dis.c, z8k-dis.c: Converted to use interface defined in
5469 ../include/dis-asm.h.
5470 * m68k-dis.c: New file (merge of ../binutils/m68k-pinsn.c
5471 and ../gdb/m68k-pinsn.c).
5472 * i386-dis.c: New file (merge of ../binutils/i386-pinsn.c
5473 and ../gdb/i386-pinsn.c).
5474 * m68881-ext.c: New file. Moved definition of
5475 ext_format ext_format_68881 from ../gdb/m68k-tdep.c.
5476 * Makefile.in: Adjust for new files.
5477 * i386-dis.c: Patches from John Hassey (hassey@dg-rtp.dg.com).
5478 * m68k-dis.c: Recognize '9' placement code, so (say) pflush
5479 can be dis-assembled.
5481 Wed Feb 17 09:19:47 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5483 * mips-dis.c (print_insn_arg): Now returns void.
5485 Mon Jan 11 16:09:16 1993 Fred Fish (fnf@cygnus.com)
5487 * mips-dis.c (ansidecl.h): Include for benefit of sysdep.h
5488 files that use the macros.
5490 Thu Jan 7 13:15:17 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5492 * mips-dis.c: New file, from gdb/mips-pinsn.c.
5493 * Makefile.in (DIS_LIBS): Added mips-dis.o.
5494 (CFILES): Added mips-dis.c.
5496 Thu Jan 7 07:36:33 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5498 * z8k-dis.c (print_insn_z8001, print_insn_z8002): new routines
5499 * z8kgen.c, z8k-opc.h: fix sizes of some shifts.
5501 Tue Dec 22 15:42:44 1992 Per Bothner (bothner@rtl.cygnus.com)
5503 * Makefile.in: Improve *clean rules.
5504 * configure.in: Allow a default host.
5506 Tue Nov 17 19:53:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5508 * Makefile.in: also use -I$(srcdir)/../bfd, since some sysdep
5509 files include other sysdep files
5511 Thu Nov 12 16:10:37 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5513 * z8k-dis.c z8k-opc.h z8kgen.c: checkpoint
5515 Fri Oct 9 04:56:05 1992 John Gilmore (gnu@cygnus.com)
5517 * configure.in: For host support, use ../bfd/configure.host
5518 so it stays in sync with the ../bfd/hosts database.
5520 Thu Oct 1 23:38:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5522 * configure.in: use cpu-vendor-os triple instead of nested cases
5524 Wed Sep 30 16:09:20 1992 Michael Werner (mtw@cygnus.com)
5526 * z8k-dis.c (unparse_instr): fix bug where opcode returned was
5527 *always* the wrong one.
5529 Wed Sep 30 07:42:17 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5531 * z8kgen.c: added copyright info
5533 Tue Sep 29 12:20:21 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5535 * z8k-dis.c (unparse_instr): prettier tabs
5536 * z8kgen.c -> z8k-opc.h: bug fixes in tables
5538 Fri Sep 25 12:50:32 1992 Stu Grossman (grossman at cygnus.com)
5540 * configure.in: Add ncr* configuration.
5541 * z8k-dis.c (struct instr_data_s): Make instr_asmsrc char to make
5542 picayune ANSI compilers happy.
5544 Sep 20 08:50:55 1992 Fred Fish (fnf@cygnus.com)
5546 * configure.in (i386): Make i386 and i486 synonymous for now.
5547 * configure.in (i[34]86-*-sysv4): Add my_host definition.
5549 Fri Sep 18 17:01:23 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
5551 * Makefile.in (install): Fix typo.
5553 Fri Sep 18 02:04:24 1992 John Gilmore (gnu@cygnus.com)
5555 * Makefile.in (make): Remove obsolete crud.
5556 (sparc-opc.o): Avoid Sun Make VPATH bug.
5558 Tue Sep 8 17:29:27 1992 K. Richard Pixley (rich@sendai.cygnus.com)
5560 * Makefile.in: since there are no SUBDIRS, remove rule and
5561 references of subdir_do.
5563 Tue Sep 8 17:02:58 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
5565 * Makefile.in (install): Get the library name right here too.
5566 Don't install bfd.h, since it's unrelated to this library. No
5567 subdirs to recurse into, either.
5568 (CFILES): The source file has a .c suffix, not .o.
5570 * sparc-opc.c: New file, moved from BFD.
5571 * Makefile.in (OFILES): Build it.
5573 Thu Sep 3 16:59:20 1992 Michael Werner (mtw@cygnus.com)
5575 * z8k-dis.c: fixed forward refferences of some declarations.
5577 Mon Aug 31 16:09:45 1992 Michael Werner (mtw@cygnus.com)
5579 * Makefile.in: get the name of the library right
5581 Mon Aug 31 13:47:35 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5583 * z8k-dis.c: knows how to disassemble z8k stuff
5584 * z8k-opc.h: new file full of z8000 opcodes
5588 version-control: never