opcodes/ChangeLog

   1 2001-10-23  Chris Demetriou  <cgd@broadcom.com>
   2
   3         * mips-opc.c (mips_builtin_opcodes): Mark "bgezall" and
   4         "bltzall" as writing GPR 31 (since they do).
   5
   6         * mips-dis.c (print_insn_arg): Calculate info->target
   7         where appropriate.
   8         (print_insn_mips): Fill in instruction info.
   9         (print_mips16_insn_arg): Remove unneded variable 'val'.
  10         Removed duplicated instruction target calculations,
  11         calculate once and print that result.  Use same idiom for
  12         masking the jump segment bits as is used in print_insn_arg.
  13
  14 2001-10-20  Alan Modra  <amodra@bigpond.net.au>
  15
  16         * ppc-opc.c (CT): Make it an optional operand.
  17
  18 2001-10-17  Chris Demetriou  <cgd@broadcom.com>
  19
  20         * mips-dis.c (mips_isa_type): Make the ISA used to disassemble
  21         SB-1 binaries include instructions specific to the SB-1.
  22         * mips-opc.c (SB1): New definition.
  23         (mips_builtin_opcodes): Add SB-1 extension opcodes "div.ps",
  24         "recip.ps", "rsqrt.ps", and "sqrt.ps".
  25
  26 2001-10-17  matthew green  <mrg@redhat.com>
  27
  28         * ppc-opc.c (STRM): New AltiVec operand.
  29         (XDSS): New AltiVec instruction form.
  30         (mtvscr): Correct operand list.
  31         (dst, dstt, dstst, dststt, dss, dssall): AltiVec instructions.
  32
  33 2001-10-17  Alan Modra  <amodra@bigpond.net.au>
  34
  35         * po/POTFILES.in: Regenerate.
  36
  37 2001-10-13  matthew green  <mrg@redhat.com>
  38
  39         * ppc-opc.c (MO): New macro for MO field of mbar instruction.
  40         (powerpc_opcodes): Add rfci, wrtee, wrteei, mfdcrx, mfdcr,
  41         mtdcrx, mtdcr, msync, dcba and mbar as BookE instructions.
  42
  43 2001-10-13  Nick Clifton  <nickc@cambridge.redhat.com>
  44
  45         * cgen-ibld.in: Include safe-ctype.h in preference to
  46         ctype.h.
  47         * cgen-asm.in: Include safe-ctype.h in preference to
  48         ctype.h.  Fix formatting.  Use ISSPACE instead of isspace and
  49         TOLOWER instead of tolower.
  50         (@arch@_cgen_build_insn_regex): Remove duplication of syntax
  51         string elements in constructed regular expression.
  52         * fr30-asm.c: Regenerate.
  53         * fr30-desc.c: Regenerate.
  54         * fr30-ibld.c: Regenerate.
  55         * m32r-asm.c: Regenerate.
  56         * m32r-desc.c: Regenerate.
  57         * m32r-ibld.c: Regenerate.
  58         * openrisc-asm.c: Regenerate.
  59         * openrisc-desc.c: Regenerate.
  60         * openrisc-ibld.c: Regenerate.
  61         * po/opcodes.pot: Regenerate.
  62
  63 2001-10-12  matthew green  <mrg@redhat.com>
  64
  65         * ppc-opc.c (insert_de, extract_de, insert_des, extract_des): New
  66         instruction field instruction/extraction functions for new BookE
  67         DE form instructions.
  68         (CT): New macro for CT field in an X form instruction.
  69         (DE, DES, DEO, DE_MASK): New macros for DE/DES fields in DE form
  70         instructions.
  71         (PPC64): Don't include PPC_OPCODE_PPC.
  72         (403): New opcode macro for PPC403 processors.
  73         (BOOKE): New opcode macro for BookE processors.
  74         (bce, bcel, bcea, bcela, bclre, bclrel: New BookE instructions.
  75         (bcctre, bcctrel, be, bel, bea, bela, icbt, icbte, lwzxe): Likewise.
  76         (dcbste, lwzuxe, luxe, dcbfe, lbzxe, lwarxe, lbzuxe): Likewise.
  77         (stwcxe, stwxe, stxe, stwuxe, stuxe, stbxe, dcbtste, stbuxe): Likewise.
  78         (mfapidi, dcbte, lhzxe, lhzuxe, lhaxe, lhauxe, subfe64): Likewise.
  79         (subfeo64, adde64, addeo64, sthxe, sthuxe, subfze64): Likewise.
  80         (subfzeo64, addze64, addzeo64, dcbie, subfme64, subfmeo64): Likewise.
  81         (addme64, addmeo64, stdcxe., mcrxr64, lwbrxe, lfsxe, lfsuxe): Likewise.
  82         (lfdxe, lfduxe, stwbrxe, stfsxe, stfsuxe, stfdxe, dcbae): Likewise.
  83         (stfduxe, tlbivax, tlbivaxe, lhbrxe, ldxe, lduxe, tlbsx): Likewise.
  84         (tlbsxe, sthbrxe, stdxe, stduxe, icbie, stfiwxe, dcbze, lbze): Likewise.
  85         (lbzue, ldue, lhze, lhzue, lhae, lhaue, lwze, lwzue): Likewise.
  86         (stbe, stbue, sthe, sthue, stwe, stwue, lfse, lfsue, lfde): Likewise.
  87         (lfdue, stde, stdue, stfse, stfsue, stfde, stfdue): Likewise.
  88
  89         * ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc): Look
  90         for a disassembler option of `booke', `booke32' or `booke64' to enable
  91         BookE support in the disassembler.
  92
  93 2001-10-12  John Healy  <jhealy@redhat.com>
  94
  95         * cgen-dis.in (print_insn): Use min (cd->base_insn_bitsize, buflen*8)
  96         for the length when extracting the base part of the insn.
  97
  98 2001-10-09  Bruno Haible  <haible@clisp.cons.org>
  99
 100         * cgen-asm.in (*_cgen_build_insn_regex): Generate a case sensitive
 101         regular expression.  Fix some formatting problems.
 102         * fr30-asm.c: Regenerate.
 103         * openrisc-asm.c: Regenerate.
 104         * m32r-asm.c: Regenerate.
 105
 106 2001-10-09  Christian Groessler <cpg@aladdin.de>
 107
 108         * z8k-dis.c (unparse_instr): Fixed formatting. Change disassembly
 109         of indirect register memory accesses to be same format the
 110         assembler accepts.
 111
 112 2001-10-09  Nick Clifton  <nickc@cambridge.redhat.com>
 113
 114         * sh-opc.h: Fix encoding of least significant nibble of the
 115         DSP single data transfer instructions.
 116
 117         * sh-dis.c (print_insn_shx): Fix decoding of As opcode in DSP
 118         instructions.
 119
 120 2001-10-08  Nick Clifton  <nickc@cambridge.redhat.com>
 121
 122         * cgen-asm.in: Fix compile time warning messages in generated
 123         C files.
 124         * cgen-dis.in: The same.
 125         * cgen-ibld.in: The same.
 126         * fr30-asm.c: Regenerate.
 127         * fr30-desc.c: Regenerate.
 128         * fr30-dis.c: Regenerate.
 129         * fr30-ibld.c: Regenerate.
 130         * fr30-opc.c: Regenerate.
 131         * m32r-asm.c: Regenerate.
 132         * m32r-desc.c: Regenerate.
 133         * m32r-dis.c: Regenerate.
 134         * m32r-ibld.c: Regenerate.
 135         * m32r-opc.c: Regenerate.
 136         * m32r-opinst.c Regenerate.
 137         * openrisc-asm.c: Regenerate.
 138         * openrisc-desc.c: Regenerate.
 139         * openrisc-dis.c: Regenerate.
 140         * openrisc-ibld.c: Regenerate.
 141         * openrisc-opc.c: Regenerate.
 142         * openrisc-opc.h: Regenerate.
 143         * Makefile.in: Regenerate.
 144         * po/POTFILES.in: Regenerate.
 145         * po/opcodes.pot: Regenerate.
 146
 147 2001-10-08  Aldy Hernandez  <aldyh@redhat.com>
 148
 149         * arm-opc.h (arm_opcodes): Add cirrus insns.
 150
 151         * arm-dis.c (print_insn_arm): Add 'I' case.
 152
 153 2001-10-03  Alan Modra  <amodra@bigpond.net.au>
 154
 155         * po/POTFILES.in: Regenerate.
 156         * configure: Regenerate.
 157
 158 2001-10-02  Alan Modra  <amodra@bigpond.net.au>
 159
 160         * Makefile.am (Makefile): Depend on bfd/configure.in.
 161         Run "make dep-am".
 162         * Makefile.in: Regenerate.
 163
 164 2001-09-30  John Healy  <jhealy@redhat.com>
 165
 166         * cgen-ibld.in (insert_1): Switched bfd_get_bits and bfd_set_bits
 167         calls to cgen_get_insn_value and cgen_put_insn_value calls.
 168         (extract_1): Switched bfd_get_bits call to cgen_get_insn_value call.
 169
 170 2001-09-30  Hans-Peter Nilsson  <hp@bitrange.com>
 171
 172         * Makefile.am: Update dependencies with "make dep-am".
 173         * Makefile.in: Regenerate.
 174
 175 2001-09-26  Alan Modra  <amodra@bigpond.net.au>
 176
 177         * arc-dis.c: Formatting fixes.
 178         (my_sprintf): Define using VPARAMS, VA_OPEN, VA_FIXEDARG, VA_CLOSE.
 179
 180 2001-09-21  Bruno Haible  <haible@clisp.cons.org>
 181
 182         * arc-dis.c: Don't include <ctype.h>.
 183         * openrisc-desc.c: Likewise.
 184         * openrisc-ibld.c: Likewise.
 185
 186 2001-09-20  Nick Clifton  <nickc@cambridge.redhat.com>
 187
 188         * fr30-opc.c: Fix compile time warning messages.
 189         * i370-opc.c: Fix compile time warning messages.
 190         * i960-dis.c: Fix compile time warning messages.
 191         * m32r-asm.c: Fix compile time warning messages.
 192         * m32r-desc.c: Fix compile time warning messages.
 193         * m32r-dis.c: Fix compile time warning messages.
 194         * m32r-ibld.c: Fix compile time warning messages.
 195         * m32r-opc.c: Fix compile time warning messages.
 196         * m32r-opinst.c: Fix compile time warning messages.
 197         * ns32k-dis.c: Fix compile time warning messages.
 198         * openrisc-asm.c: Fix compile time warning messages.
 199         * openrisc-desc.c: Fix compile time warning messages.
 200         * openrisc-dis.c: Fix compile time warning messages.
 201         * openrisc-ibld.c: Fix compile time warning messages.
 202         * openrisc-opc.c: Fix compile time warning messages.
 203         * pdp11-dis.c: Fix compile time warning messages.
 204         * tic54x-dis.c: Fix compile time warning messages.
 205         * v850-opc.c: Fix compile time warning messages.
 206         * vax-dis.c: Fix compile time warning messages.
 207         * w65-opc.h: Fix compile time warning messages.
 208         * z8k-opc.h: Fix compile time warning messages.
 209         * z8kgen.c: Fix compile time warning messages.
 210
 211 2001-09-19  Nick Clifton  <nickc@cambridge.redhat.com>
 212
 213         * arm-dis.c:   Fix compile time warning messages.
 214         * cgen-asm.c:  Fix compile time warning messages.
 215         * cgen-dis.c:  Fix compile time warning messages.
 216         * cris-dis.c:  Fix compile time warning messages.
 217         * d10v-dis.c:  Fix compile time warning messages.
 218         * fr30-asm.c:  Fix compile time warning messages.
 219         * fr30-desc.c: Fix compile time warning messages.
 220         * fr30-dis.c:  Fix compile time warning messages.
 221         * fr30-ibld.c: Fix compile time warning messages.
 222
 223 2001-09-18  Bruno Haible  <haible@clisp.cons.org>
 224
 225         * cgen-asm.c: Include "safe-ctype.h" instead of <ctype.h>.
 226         (cgen_parse_keyword): Use ISALNUM instead of isalnum.
 227         * cgen-opc.c: Include "safe-ctype.h" instead of <ctype.h>.
 228         (cgen_keyword_lookup_name): Use ISALPHA/TOLOWER instead of
 229         isalpha/tolower.
 230         (cgen_keyword_add): Use ISALNUM instead of isalnum.
 231         (hash_keyword_name): Use TOLOWER instead of tolower.
 232         * fr30-asm.c: Include "safe-ctype.h" instead of <ctype.h>.
 233         (parse_insn_normal): Use TOLOWER/ISSPACE instead of
 234         tolower/isspace.
 235         (fr30_cgen_assemble_insn): Use ISSPACE instead of isspace.
 236         * fr30-desc.c: Don't include <ctype.h>.
 237         * fr30-ibld.c: Likewise.
 238         * ia64-gen.c: Include "safe-ctype.h" instead of <ctype.h>.
 239         (load_insn_classes, parse_resource_users, load_depfile): Use
 240         ISSPACE instead of isspace.
 241         * m32r-asm.c: Include "safe-ctype.h" instead of <ctype.h>.
 242         (parse_insn_normal): Use TOLOWER/ISSPACE instead of
 243         tolower/isspace.
 244         (m32r_cgen_assemble_insn): Use ISSPACE instead of isspace.
 245         * m32r-desc.c: Don't include <ctype.h>.
 246         * m32r-ibld.c: Likewise.
 247         * openrisc-asm.c: Include "safe-ctype.h" instead of <ctype.h>.
 248         (parse_insn_normal): Use TOLOWER/ISSPACE instead of
 249         tolower/isspace.
 250         (openrisc_cgen_assemble_insn): Use ISSPACE instead of isspace.
 251
 252 2001-09-18  Martin Schwidefsky <schwidefsky@de.ibm.com>
 253
 254         * Makefile.am: Add rules and dependencies to create the s/390 opcode
 255         table out of s390-opc.txt automatically.
 256         * configure.in: Add BFD_CC_FOR_BUILD to allow CC_FOR_BUILD to be used.
 257         * s390-mkopc.c (dumpTable): Change output to create a complete file.
 258         * s390-opc.c: New improved opcode format macros and remove the
 259         pregenerated opcode table.
 260         * s390-opc.txt: Adapt to new improved opcode format macros.
 261
 262 2001-09-14  David Schleef <ds@schleef.org>
 263
 264         * ppc-opc.c (VXA, VXA_MASK): Fix mask bits.
 265
 266 2001-09-04  Alan Modra  <amodra@bigpond.net.au>
 267
 268         * i386-dis.c (grps): Don't print the implicit al/ax/eax register
 269         for opcode 0xf6 or 0xf7 forms of mul, imul, div, idiv insns.
 270
 271 2001-08-31  Eric Christopher  <echristo@redhat.com>
 272             Jason Eckhardt    <jle@redhat.com>
 273
 274         * mips-dis.c: Add support for bfd_mach_mipsisa32 and
 275         bfd_mach_mipsisa64. Remove bfd_mach_mips32, bfd_mach_mips32_4k,
 276         bfd_mach_mips64.
 277
 278 2001-08-31  Andreas Jaeger  <aj@suse.de>
 279
 280         * tic54x-opc.c: Add default initializers to avoid warnings.
 281
 282         * arc-opc.c: Include "sysdep.h" to get stdio.h as include file.
 283         * arc-ext.c: Likewise.
 284
 285 2001-08-28  matthew gren  <mrg@redhat.com>
 286
 287         * ppc-opc.c (icbt): Order correctly.
 288
 289 2001-08-27  David Edelsohn  <dje@watson.ibm.com>
 290             Torbjorn Granlund  <tege@swox.com>
 291
 292         * ppc-opc.c (DS): Add PPC_OPERAND_DS flag.
 293         (LS): Define.
 294         (insert_ds): Complain if not a multiple of 4.
 295         (XSYNC): Define.
 296         (XSYNC_MASK): Define.
 297         (powerpc_opcodes): Add "slbmte", "lwsync", "ptesync", "slbmfev",
 298         "slbmfee".  Modify "sync" to use XSYNC_MASK and LS.
 299
 300 2001-08-26  Andreas Jaeger  <aj@suse.de>
 301
 302         * h8500-opc.h: Add default initializers to h8500_table to shut up
 303         GCC warnings.
 304
 305 2001-08-25  Andreas Jaeger  <aj@suse.de>
 306
 307         * tic54x-dis.c: Add unused attributes where needed.
 308
 309         * z8k-dis.c (output_instr): Add unused attribute.
 310
 311         * h8300-dis.c: Add missing prototypes.
 312         (bfd_h8_disassemble): Make static.
 313
 314         * cris-dis.c: Add missing prototype.
 315         * h8500-dis.c: Likewise.
 316         * m68hc11-dis.c: Likewise.
 317         * pj-dis.c: Likewise.
 318         * tic54x-dis.c: Likewise.
 319         * v850-dis.c: Likewise.
 320         * vax-dis.c: Likewise.
 321         * w65-dis.c: Likewise.
 322         * z8k-dis.c: Likewise.
 323
 324         * d10v-dis.c: Add missing prototype.
 325         (dis_long): Remove unused variable.
 326         (dis_2_short): Likewise.
 327
 328         * sh-dis.c: Add missing prototypes.
 329         * v850-opc.c: Likewise.
 330         Add unused attributes where needed.
 331
 332         * ns32k-dis.c: Add missing prototypes.
 333         (bit_extract_simple): Remove unused variable.
 334
 335 2001-08-23  Martin Schwidefsky  <schwidefsky@de.ibm.com>
 336
 337         * opcodes/s390-opc.c: Add "low or high" and "not low or high"
 338         branch instructions for gcc 3.0.
 339         * opcodes/s390-opc.txt: Likewise.
 340
 341 2001-08-21  Andreas Jaeger  <aj@suse.de>
 342
 343         * i960-dis.c: Add parameters for prototypes
 344         (ctrl): Add unused attributes.
 345         (cobr): Likewise.
 346         (put_abs): Likewise.
 347
 348         * mips-dis.c: Add missing prototypes.
 349         * a29k-dis.c: Likewise.
 350         * arc-dis.c: Likewise.
 351         * ia64-opc.c: Likewise.
 352
 353         * s390-dis.c: Add missing prototypes.
 354         (init_disasm): Remove unused attribute since the parameter is
 355         used.
 356
 357 2001-08-16  Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
 358
 359         * mips-opc.c (M1): Define. Reformatted Code.
 360         (mips_builtin_opcodes): Added performance counter opcodes mfpc, mfps,
 361         mtps, mtps. Typo.
 362
 363 2001-08-16  Jonathan Larmour  <jlarmour@redhat.com>
 364
 365         * mips-opc.c: R3900s can support all branch likely INSN_MACROs where
 366         the corresponding non-likely insn is in MIPS I.
 367
 368 2001-08-13  Kazu Hirata  <kazu@hxi.com>
 369
 370         * mcore-dis.c: Fix formatting.
 371         * mips-dis.c: Likewise.
 372         * pj-dis.c: Likewise.
 373         * z8k-dis.c: Likewise.
 374
 375 2001-08-12  Richard Henderson  <rth@redhat.com>
 376
 377         * cgen-ibld.in (extract_normal): Match type of VALUE and MASK
 378         to *VALUEP.  Regenerate all cgen files.
 379
 380 2001-08-10  Richard Sandiford  <rsandifo@redhat.com>
 381
 382         * mips-dis.c (print_insn_mips): Remove OPCODE_IS_MEMBER's gp32
 383         argument.
 384         * mips-opc.c (G6): Undefine.
 385         (mips_builtin_opcodes): Remove gp32 entry for "move".  Add macro
 386         as the first "move" alternative.
 387
 388 2001-08-10  Andreas Jaeger  <aj@suse.de>
 389
 390         * configure.in: Add -Wstrict-prototypes and -Wmissing-prototypes
 391         to build warnings.
 392         * configure: Regenerate.
 393
 394 2001-08-10  Alan Modra  <amodra@bigpond.net.au>
 395
 396         * ppc-opc.c: Revert 2001-08-08.
 397
 398 2001-08-09  Alan Modra  <amodra@bigpond.net.au>
 399
 400         * dis-buf.c (generic_strcat_address): Add missing prototype.
 401         #if 0 the functions as it is unused.
 402
 403 2001-08-08  Alan Modra  <amodra@bigpond.net.au>
 404
 405         1999-10-25  Torbjorn Granlund  <tege@swox.com>
 406         * ppc-opc.c: Include "bfd.h".
 407         (powerpc_operands): Add new field for reloc type.
 408
 409 2001-07-21  Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
 410
 411         * mips-dis.c (print_insn_arg): Don't use software integer registers
 412         for coprocessor registers.
 413         (get_mips_isa): Removed.
 414         (is_newabi): New function, checks if NewABI is used.
 415         (_print_insn_mips): Get distinction between old ABI and new ABI right.
 416
 417 2001-08-01  Christian Groessler <cpg@aladdin.de>
 418
 419         * z8kgen.c: Fixed indentation of opt[] array.  Include stdio.h to
 420         get stderr definition.
 421         (internal, gas): Removed warnings.
 422         (gas): Create a correct final entry for created array.
 423         * z8k-opc.h: Recreated with new z8kgen.
 424
 425 2001-07-28  Kazu Hirata  <kazu@hxi.com>
 426
 427         * i386-dis.c: Fix formatting.
 428
 429 2001-07-28  Matthias Kramm <kramm@quiss.org>
 430
 431         * i386-dis.c: Change formatting conventions for architecture
 432         i386:intel to better match the format of various intel i386
 433         assemblers, like nasm, tasm or masm.
 434
 435 2001-07-24  Alan Modra  <amodra@bigpond.net.au>
 436
 437         * Makefile.am: Update dependencies with "make dep-am".
 438         * Makefile.in: Regenerate
 439
 440 2001-07-24  Kazu Hirata  <kazu@hxi.com>
 441
 442         * alpha-dis.c: Fix formatting.
 443         * cris-dis.c: Likewise.
 444         * d10v-dis.c: Likewise.
 445         * d30v-dis.c: Likewise.
 446         * m10300-dis.c: Likewise.
 447         * tic54x-dis.c: Likewise.
 448
 449 2001-07-23  Kazu Hirata  <kazu@hxi.com>
 450
 451         * m68k-dis.c: Fix formatting.
 452         * pj-dis.c: Likewise.
 453         * s390-dis.c: Likewise.
 454         * z8k-dis.c: Likewise.
 455
 456 2001-07-21  Chris Demetriou  <cgd@broadcom.com>
 457
 458         * mips-opc.c (mips_builtin_opcodes): Sort c.le.s and c.lt.s
 459         into the rest of the surrounding definitions.
 460
 461 2001-07-18  Alan Modra  <amodra@bigpond.net.au>
 462
 463         * i386-dis.c (grps): Print l or w suffix, and require mem modrm
 464         for lgdt, lidt, sgdt, sidt.
 465
 466 2001-07-13  Philip Blundell  <philb@gnu.org>
 467
 468         * arm-dis.c (print_insn_arm): Use decimal for offsets in LDR/STR.
 469
 470 2001-07-12  Jeff Johnston  <jjohnstn@redhat.com>
 471
 472         * cgen-asm.in: Include "xregex.h" always to enable the libiberty
 473         regex support.
 474         (@arch@_cgen_build_insn_regex): New routine from Graydon.
 475         (@arch@_cgen_assemble_insn): Add Graydon's code to use regex
 476         to verify if it is worth parsing the insn as insn "x".  Also update
 477         error message when insn is not a recognized format of the insn vs
 478         when the insn is completely unrecognized.
 479
 480 2001-07-11  Frank Ch. Eigler  <fche@redhat.com>
 481
 482         * cgen-dis.in (print_insn): Use cgen_get_insn_value instead of
 483         bfd_get_bits.
 484         * cgen-opc.c (cgen_get_insn_value, cgen_put_insn_value): Respect
 485         non-zero CGEN_CPU_DESC->insn_chunk_bitsize.
 486
 487 2001-07-09  Andreas Jaeger  <aj@suse.de>, Karsten Keil <kkeil@suse.de>
 488
 489         * i386-dis.c (set_op): Handle 64 bit and 32 bit mode.
 490         (OP_J): Use bfd_vma for mask to work properly with 64 bits.
 491         (op_address,op_riprel): Use bfd_vma to handle 64 bits.
 492
 493 2001-07-05  Ben Elliston  <bje@redhat.com>
 494
 495         * Makefile.am (CPUDIR): Define.
 496         (stamp-m32r): Update dependencies.
 497         (stamp-fr30): Ditto.
 498         (stamp-openrisc): Ditto.
 499         * Makefile.in: Regenerate.
 500
 501 2001-07-03  Zoltan Hidvegi <hzoli@hzoli.2y.net>
 502
 503         * ppc-opc.c: Fix encoding of 'clf' instruction.
 504
 505 2001-06-30  Geoffrey Keating  <geoffk@redhat.com>
 506
 507         * cgen-ibld.in (insert_normal): Support CGEN_IFLD_SIGN_OPT.
 508
 509 2001-06-28  Geoffrey Keating  <geoffk@redhat.com>
 510
 511         * cgen-asm.c (cgen_parse_keyword): Allow any first character.
 512         * cgen-opc.c (cgen_keyword_add): Ignore special first
 513         character when building nonalpha_chars field.
 514
 515 2001-06-24  Ben Elliston  <bje@redhat.com>
 516
 517         * m88k-dis.c: Format to conform to GNU coding standards.
 518
 519 2001-06-23  Andreas Jaeger  <aj@suse.de>
 520
 521         * disassemble.c (disassembler_usage): Add unused attribute.
 522
 523 2001-06-22  Eric Christopher  <echristo@redhat.com>
 524
 525         * mips-opc.c: Move prefx to start of the table.
 526
 527 2001-06-22  Stacey Sheldon <ssheldon@Catena.com>
 528
 529         * arc-opc.c (insert_st_syntax): Fix over-optimisation of ST
 530         instruction.
 531
 532 2001-06-22  Pauli <pauli@moreton.com.au>
 533
 534         * m68k-opc.c: Add wdebug instruction.
 535
 536 2001-06-15  Aldy Hernandez  <aldyh@redhat.com>
 537
 538         * m10300-opc.c (mn10300_opcodes): Change opcode for AM33 subc.
 539
 540 2001-06-14  Geoffrey Keating  <geoffk@redhat.com>
 541
 542         * cgen-asm.c (cgen_parse_keyword): When looking for the
 543         boundaries of a keyword, allow any special characters
 544         that are actually in one of the allowed keyword.
 545         * cgen-opc.c (cgen_keyword_add): Add any special characters
 546         to the nonalpha_chars field.
 547
 548 2001-06-12  Martin Schwidefsky <schwidefsky@de.ibm.com>
 549
 550         * s390-opc.c: Add lgh instruction.
 551         * s390-opc.txt: Likewise.
 552
 553 2001-06-11  Alan Modra  <amodra@bigpond.net.au>
 554
 555         * i386-dis.c: Group function prototypes in one place.
 556         (FLOATCODE): Redefine as 1.
 557         (USE_GROUPS): Redefine as 2.
 558         (USE_PREFIX_USER_TABLE): Redefine as 3.
 559         (X86_64_SPECIAL): Define as 4.
 560         (GRP1b..GRPAMD): Move USE_GROUPS to bytecode1, index to bytecode2.
 561         (PREGRP0..PREGRP26): Similarly with USE_PREFIX_USER_TABLE.
 562         (dis386_att, dis386_intel, disx86_64_att, disx86_64_intel): Delete.
 563         (dis386): New table combining above four tables.
 564         (dis386_twobyte_att, dis386_twobyte_intel): Delete.
 565         (dis386_twobyte): New table combining above two tables.
 566         (x86_64_table): New table to handle x86_64.
 567         (X86_64_0): Define.
 568         (float_mem_att, float_mem_intel): Delet.
 569         (float_mem): New table combining above two tables.
 570         (print_insn_i386): Modify for above.
 571         (dofloat): Likewise.
 572         (putop): Handle '{', '|' and '}' to select alternative mnemonics.
 573         Return 0 on success, 1 if no valid alternative.
 574         (putop <case 'F'>, <case 'H'>): Print nothing for intel_syntax.
 575         (putop <case 'T'>): Move to case 'U', and share case 'Q' code.
 576         (putop <case 'I'>): Move to case 'T', and share case 'P' code.
 577         (OP_REG <case rAX_reg .. rDI_reg>): Handle as for eAX_reg .. eDI_reg
 578         if not 64-bit mode.
 579         (OP_I <case q_mode>): Handle as for v_mode if not 64-bit mode.
 580         (OP_I64): If not 64-bit mode, call OP_I.
 581         OP_OFF64): If not 64-bit mode, call OP_OFF.
 582         (OP_ST, OP_STi, OP_SEG, OP_DIR, OP_OFF, OP_OFF64, OP_MMX): Rename
 583         'ignore'/'ignored' to 'bytemode'.
 584
 585 2001-06-10  Alan Modra  <amodra@bigpond.net.au>
 586
 587         * configure.in: Sort 'ta' case statement.
 588         * configure: Regenerate.
 589
 590         * i386-dis.c (dis386_att): Add 'H' to conditional branch and
 591         loop,jcxz insns.
 592         (disx86_64_att): Likewise.
 593         (dis386_twobyte_att): Likewise.
 594         (print_insn_i386): Don't print branch hints as a prefix.
 595         (putop): 'H' macro prints branch hints.
 596         (get64): Kill compile warnings.
 597
 598 2001-06-09  Alexandre Oliva  <aoliva@redhat.com>
 599
 600         * sh-opc.h (sh_table): Don't use empty initializers.
 601
 602 2001-06-06  Christian Groessler <cpg@aladdin.de>
 603
 604         * z8k-dis.c: Fix formatting.
 605         (unpack_instr): Remove unused cases in switch statement. Add
 606         safety abort() in default case.
 607         (unparse_instr): Add safety abort() in default case.
 608
 609 2001-06-06  Peter Jakubek <pjak@snafu.de>
 610
 611         * m68k-dis.c (print_insn_m68k): Fix typo.
 612         * m68k-opc.c (m68k_opcodes): Correct allowed operands for
 613         mcf (ColdFire) div, rem and moveb instructions.
 614
 615 2001-06-06  Alan Modra  <amodra@bigpond.net.au>
 616
 617         * i386-dis.c (cond_jump_flag, loop_jcxz_flag): Define.
 618         (cond_jump_mode, loop_jcxz_mode): Define.
 619         (dis386_att): Add cond_jump_flag and loop_jcxz_flag as
 620         appropriate, and 'F' suffix to loop insns.
 621         (disx86_64_att): Likewise.
 622         (dis386_twobyte_att): Likewise.
 623         (print_insn_i386): Don't output addr prefix for loop, jcxz insns.
 624         Output data size prefix for long conditional jumps.  Output cs and
 625         ds branch hints.
 626         (putop): Handle 'F', and mark PREFIX_ADDR used for case 'E'.
 627         (OP_J): Don't make PREFIX_DATA used.
 628
 629 2001-06-04  Alexandre Oliva  <aoliva@redhat.com>
 630
 631         * sh-opc.h (sh_table): Complete last element entry to avoid
 632         compiler warning.
 633
 634 2001-05-16  Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
 635
 636         * mips-dis.c (mips_isa_type): Add MIPS r12k support.
 637
 638 2001-05-23  Alan Modra  <amodra@one.net.au>
 639
 640         * arc-opc.c: Whitespace changes.
 641
 642 2001-05-18  Hans-Peter Nilsson  <hp@axis.com>
 643
 644         * cris-opc.c (cris_spec_regs): Add missing initializer field for
 645         last element.
 646
 647 2001-05-15  Frank Ch. Eigler  <fche@redhat.com>
 648
 649         * cgen-dis.in (extract_normal): Complete support for min<base case.
 650
 651 2001-05-15  Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
 652
 653         * mips-dis.c (INSNLEN): Rename MAXLEN.
 654         (std_reg_names): Replace by mips32_reg_names and mips64_reg_names.
 655         (print_insn_arg): Remove $ prefix of register names.
 656         (set_mips_isa_type): Remove.
 657         (mips_isa_type): New function.
 658         (get_mips_isa): New Function.
 659         (print_insn_mips): Rename _print_insn_mips.
 660         (_print_insn_mips): New function, contains code which was
 661         duplicated in print_insn_big_mips and print_insn_little_mips.
 662         (print_insn_big_mips): Moved code to _print_insn_mips.
 663         (print_insn_little_mips): Likewise.
 664         (print_mips16_insn_arg): Remove $ prefix of register names.
 665         Print error message before abort.
 666
 667 2001-05-14  J.T. Conklin  <jtc@redback.com>
 668
 669         * ppc-opc.c (powerpc_opcodes): Fixed extended opcode field of
 670         simplified mnemonics used for setting PPC750-specific special
 671         purpose registers.
 672
 673 2001-05-12  H.J. Lu  <hjl@gnu.org>
 674
 675         * i386-dis.c (print_insn_i386): Always set `mod', `reg' and
 676         `rm'.
 677
 678 2001-05-12  Peter Targett  <peter.targett@arccores.com>
 679
 680         * arc-opc.c (arc_reg_names): Correct attribute for lp_count
 681         register to r/w.  Formatting fixes throughout file.
 682
 683 2001-05-12  Alan Modra  <amodra@one.net.au>
 684
 685         * i386-dis.c (prefix_user_table): Correct movq2dq, movdq2q, and
 686         movq operands.
 687         (twobyte_has_modrm): Update table.
 688         (need_modrm): Give it file scope.
 689         (MODRM_CHECK): Define.
 690         (dofloat): Use MODRM_CHECK.
 691         (OP_E): Likewise.
 692         (OP_EM): Likewise.
 693         (OP_EX): Likewise.
 694
 695 2001-05-07  Frank Ch. Eigler  <fche@redhat.com>
 696
 697         * cgen-dis.in (default_print_insn): Tolerate min<base instructions
 698         even at end of a section.
 699         * cgen-ibld.in (extract_normal): Tolerate min!=base!=max instructions
 700         by ignoring precariously-unpacked insn_value in favor of raw buffer.
 701
 702 2001-05-03  Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
 703
 704         * disassemble.c (disassembler_usage): Remove unused attribute.
 705
 706 2001-05-04  Frank Ch. Eigler  <fche@redhat.com>
 707
 708         * m32r-dis.c, -asm.c, -ibld.c: Regenerated with disassembler fixes.
 709
 710 2001-05-04  Frank Ch. Eigler  <fche@redhat.com>
 711
 712         * cgen-dis.in (print_insn): Remove call to read_insn.  Instead,
 713         assume incoming buffer already has the base insn loaded.  Handle
 714         smaller-than-base instructions for variable-length case.
 715
 716 2001-05-04  Alan Modra  <amodra@one.net.au>
 717
 718         * i386-dis.c (Ev, Ed): Remove duplicate define.
 719         (Gd): Define.
 720         (XS): Define.
 721         (OP_XS): New function.
 722         (dis386_twobyte_att): Correct pinsrw, pextrw, pmovmskb, and
 723         movmskp operands.
 724         (dis386_twobyte_intel): Likewise.
 725         (prefix_user_table): Use MS for maskmovq operand.
 726
 727 2001-04-27  Johan Rydberg  <jrydberg@opencores.org>
 728
 729         * Makefile.am: Add OpenRISC target.
 730         * Makefile.in: Regenerated.
 731
 732         * disassemble.c (disassembler): Recognize the OpenRISC disassembly.
 733
 734         * configure.in (bfd_openrisc_arch): Add target.
 735         * configure: Regenerated.
 736
 737         * openrisc-asm.c: New file.
 738         * openrisc-desc.c: Likewise.
 739         * openrisc-desc.h: Likewise.
 740         * openrisc-dis.c: Likewise.
 741         * openrisc-ibld.c: Likewise.
 742         * openrisc-opc.c: Likewise.
 743         * openrisc-opc.h: Likewise.
 744
 745 2001-04-24  Christian Groessler  <cpg@aladdin.de>
 746
 747         * z8k-dis.c: add names of control registers (ctrl_names);
 748         (seg_length): provides instruction length fixup for segmented
 749         mode; (unpack_instr): correctly handle ARG_DISP16, ARG_DISP12,
 750         CLASS_0DISP7, CLASS_1DISP7, CLASS_DISP8 and CLASS_PR cases;
 751         (unparse_intr): handle CLASS_PR, print addresses without '#'
 752         * z8k-opc.h: re-created with new z8kgen
 753         * z8kgen.c: merged in fixes which were in existing z8k-opc.h; new
 754         entries for ldctl/ldctlb instruction
 755
 756 2001-04-06  Andreas Jaeger  <aj@suse.de>
 757
 758         * i386-dis.c: Add ffreep instruction.
 759
 760 2001-03-30  Alexandre Oliva  <aoliva@redhat.com>
 761
 762         * ppc-opc.c (insert_mbe): Shift mask initializer as long.
 763
 764 2001-03-24  Alan Modra  <alan@linuxcare.com.au>
 765
 766         * i386-dis.c (PREGRP25): Define.
 767         (dis386_twobyte_att): Use here in place of "movntq" entry.
 768         (dis386_twobyte_intel): Likewise.
 769         (prefix_user_table): Add PREGRP25 entry for "movntq" and "movntdq".
 770         (PREGRP26): Define.
 771         (dis386_twobyte_att): Use here.
 772         (dis386_twobyte_intel): Likewise.
 773         (prefix_user_table): Add PREGRP26 entry for "punpcklqdq".
 774         (prefix_user_table <maskmovdqu>): XM operand, not MX.
 775         (prefix_user_table): Cosmetic changes to "bad" entries.
 776
 777 2001-03-23  Nick Clifton  <nickc@redhat.com>
 778
 779         * mips-opc.c: Remove extraneous whitespace.
 780         * mips-dis.c: Remove extraneous whitespace.
 781
 782 2001-03-22  Ben Elliston  <bje@redhat.com>
 783
 784         * cgen-asm.in (@arch@_cgen_assemble_insn): Move tmp_errmsg
 785         declaration inside CGEN_VERBOSE_ASSEMBLER_ERRORS conditional.
 786         * cgen-ibld.in (put_insn_int_value): Mark cd parameter as unused
 787         to allay a compiler warning.
 788
 789 2001-03-22  Alan Modra  <alan@linuxcare.com.au>
 790
 791         * i386-dis.c (dis386_twobyte_att): Add entries for paddq, psubq.
 792         (dis386_twobyte_intel): Likewise.
 793         (twobyte_has_modrm): Set entry for paddq, psubq.
 794
 795 2001-03-20  Patrick Macdonald  <patrickm@redhat.com>
 796
 797         * cgen-dis.in (print_insn_@arch@): Add support for target machine
 798         determination via CGEN_COMPUTE_MACH.
 799         * fr30-desc.c: Regenerate.
 800         * fr30-dis.c: Regenerate.
 801         * fr30-opc.h: Regenerate.
 802         * m32r-desc.c: Regenerate.
 803         * m32r-dis.c: Regenerate.
 804         * m32r-opc.h: Regenerate.
 805         * m32r-opinst.c: Regenerate.
 806
 807 2001-03-20  H.J. Lu  <hjl@gnu.org>
 808
 809         * configure.in: Remove the redundent AC_ARG_PROGRAM.
 810         * configure: Rebuild.
 811
 812 2001-03-19  Jim Wilson  <wilson@redhat.com>
 813
 814         * ia64-gen.c (fetch_insn_class): If xsect, then ignore comment and
 815         notestr if larger than xsect.
 816         (in_class): Handle format M5.
 817         * ia64-asmtab.c: Regnerate.
 818
 819 2001-03-19  John David Anglin  <dave@hiauly1.hia.nrc.ca>
 820
 821         * vax-dis.c (print_insn_vax): Only fetch two bytes if the info buffer
 822         has more than one byte left to read.
 823
 824 2001-03-16  Martin Schwidefsky  <schwidefsky@de.ibm.com>
 825
 826         * s390-opc.c: Add new opcodes.  Smooth out formatting.
 827         * s390-opc.txt: Add new opcodes.
 828
 829 2001-03-06  Nick Clifton  <nickc@redhat.com>
 830
 831         * arm-dis.c (print_insn_thumb): Compute destination address
 832         of BLX(1) instruction by taking bit 1 from PC and not from bit
 833         0 of the offset.
 834
 835 2001-03-06  Igor Shevlyakov  <igor@windriver.com>
 836
 837         * m68k-dis.c (print_insn_m68k): Recognize Coldfire CPUs
 838         so command line switches will work.
 839
 840 2001-03-05  Dave Brolley  <brolley@redhat.com>
 841
 842         * fr30-asm.c: Regenerate.
 843         * fr30-desc.c: Regenerate.
 844         * fr30-desc.h: Regenerate.
 845         * fr30-dis.c: Regenerate.
 846         * fr30-ibld.c: Regenerate.
 847         * fr30-opc.c: Regenerate.
 848         * fr30-opc.h: Regenerate.
 849         * m32r-asm.c: Regenerate.
 850         * m32r-desc.c: Regenerate.
 851         * m32r-desc.h: Regenerate.
 852         * m32r-dis.c: Regenerate.
 853         * m32r-ibld.c: Regenerate.
 854         * m32r-opc.c: Regenerate.
 855         * m32r-opc.h: Regenerate.
 856         * m32r-opinst.c: Regenerate.
 857
 858 2001-02-28  Igor Shevlyakov  <igor@windriver.com>
 859
 860         * m68k-opc.c: fix cpushl according to Motorola. Enable
 861         bunch of instructions for Coldfire 5407 and add all new.
 862
 863 2001-02-27  Alan Modra  <alan@linuxcare.com.au>
 864
 865         * configure.in (BFD_VERSION): Do without grep.
 866         * configure: Regenerate.
 867         * Makefile.am: Run "make dep-am".
 868         * Makefile.in: Regenerate.
 869
 870 2001-02-23  David Mosberger  <davidm@hpl.hp.com>
 871
 872         * ia64-opc-a.c: Add missing pseudo-ops for "cmp" and "cmp4".
 873         * ia64-asmtab.c: Regenerate.
 874
 875 2001-02-21  David Mosberger  <davidm@hpl.hp.com>
 876
 877         * ia64-opc-d.c (ia64_opcodes_d): Break the "add" pattern into two
 878         separate variants: one for IMM22 and the other for IMM14.
 879         * ia64-asmtab.c: Regenerate.
 880
 881 2001-02-21  Greg McGary  <greg@mcgary.org>
 882
 883         * cgen-opc.c (cgen_get_insn_value): Add missing `return'.
 884
 885 2001-02-20  H.J. Lu  <hjl@gnu.org>
 886
 887         * Makefile.am (ia64-ic.tbl): Remove the target.
 888         (ia64-raw.tbl): Likewise.
 889         (ia64-waw.tbl): Likewise.
 890         (ia64-war.tbl): Likewise.
 891         (ia64-asmtab.c): Generate it in the source directory.
 892         * Makefile.in: Regenerated.
 893
 894 2001-02-18  lars brinkhoff  <lars@nocrew.org>
 895
 896         * Makefile.am: Add PDP-11 target.
 897         * configure.in: Likewise.
 898         * disassemble.c: Likewise.
 899         * pdp11-dis.c: New file.
 900         * pdp11-opc.c: New file.
 901
 902 2001-02-14  Jim Wilson  <wilson@redhat.com>
 903
 904         * ia64-ic.tbl: Update from Intel.  Add setf to fr-writers.
 905         * ia64-asmtab.c: Regenerate.
 906
 907 Mon Feb 12 17:41:26 CET 2001  Jan Hubicka  <jh@suse.cz>
 908
 909         * i386-dis.c (prefix_user_t): Add 'Y' to SSE ineger converison
 910         instructions.
 911         (putop): Handle 'Y'
 912
 913 2001-02-11  Maciej W. Rozycki  <macro@ds2.pg.gda.pl>
 914
 915         * mips-dis.c (print_insn_arg): Use top four bits of the address of
 916         the following instruction not of the jump itself for the jump
 917         target.
 918         (print_mips16_insn_arg): Likewise.
 919
 920 2001-02-11  Michael Sokolov  <msokolov@ivan.Harhan.ORG>
 921
 922         * Makefile.am (stamp-lib): ranlib the libopcodes.a in the build
 923         directory.
 924         * Makefile.in: Regenerate.
 925
 926 2001-02-09  Schwidefsky  <schwidefsky@de.ibm.com>
 927
 928         * Makefile.am: Add linux target for S/390.
 929         * Makefile.in: Likewise.
 930         * configure.in: Likewise.
 931         * disassemble.c: Likewise.
 932         * s390-dis.c: New file.
 933         * s390-mkopc.c: New file.
 934         * s390-opc.c: New file.
 935         * s390-opc.txt: New file.
 936
 937 2001-02-05  Jim Wilson  <wilson@redhat.com>
 938
 939         * ia64-asmtab.c: Revert 2000-12-16 change.
 940
 941 2001-02-02  Patrick Macdonald  <patrickm@redhat.com>
 942
 943         * fr30-desc.h: Regenerate with CGEN_MAX_SYNTAX_ELEMENTS.
 944         * m32r-desc.h: Regenerate.
 945
 946 Thu Feb  1 16:29:06 MET 2001  Jan Hubicka  <jh@suse.cz>
 947
 948         * i386-dis.c (dis386_att, grps): Use 'T' for push/pop
 949         (putop): Handle 'T', alphabetize order, fix 'I' handling in Intel syntax
 950
 951 2001-01-14  Alan Modra  <alan@linuxcare.com.au>
 952
 953         * hppa-dis.c (print_insn_hppa): Handle '>' and '<' arg types.
 954
 955 2001-01-13  Nick Clifton  <nickc@redhat.com>
 956
 957         * disassemble.c: Remove spurious white space.
 958
 959 Sat Jan 13 01:48:24 MET 2001  Jan Hubicka  <jh@suse.cz>
 960
 961         * i386-dis.c (dis386_att, disx86_64_att): Fix ret, lret and iret
 962         templates.
 963
 964 2001-01-11  Peter Targett  <peter.targett@arccores.com>
 965
 966         * configure.in: Add arc-ext.lo for bfd_arc_arch selection.
 967         * Makefile.am (C_FILES): Add arc-ext.c.
 968         (ALL_MACHINES) Add arc-ext.lo.
 969         (INCLUDES) Add opcode directory to list.
 970         New dependency entry for arc-ext.lo.
 971         * disassemble.c (disassembler): Correct call to
 972         arc_get_disassembler.
 973         * arc-opc.c: New update for ARC, including full base
 974         instructions for ARC variants.
 975         * arc-dis.h, arc-dis.c: New update for ARC, including
 976         extensibility functionality.
 977         * arc-ext.h, arc-ext.c: New files for handling extensibility.
 978
 979 2001-01-10  Jan Hubicka  <jh@suse.cz>
 980
 981         * i386-dis.c (PREGRP15 - PREGRP24): New.
 982         (dis386_twobyt): Add SSE2 instructions.
 983         (twobyte_uses_SSE_prefix: Rename from ... ; add new SSE instructions.
 984         (twobyte_uses_f3_prefix): ... this one.
 985         (grps): Add SSE instructions.
 986         (prefix_user_table): Add two new slots; add SSE2 instructions.
 987         (print_insn_i386): Rename uses_f3_prefix to uses_SSE_prefix;
 988         Handle the REPNZ and Data16 prefixes as well; do proper lookup
 989         to prefix_user_table.
 990         (OP_E): Accept mfence and lfence as well.
 991         (OP_MMX): Data16 prefix turns MMX to SSE; support REX extensions.
 992         (OP_XMM): Support REX extensions.
 993         (OP_EM): Likewise.
 994         (OP_EX): Likewise.
 995
 996 2001-01-09  Nick Clifton  <nickc@redhat.com>
 997
 998         * arm-dis.c (print_insn): Set pc to zero for instructions with
 999         a reloc associated with them.
1000
1001 2001-01-09  Jeff Johnston  <jjohnstn@redhat.com>
1002
1003         * cgen-asm.in (parse_insn_normal): Changed syn to be
1004         CGEN_SYNTAX_CHAR_TYPE.  Changed all references to *syn
1005         as character to use CGEN_SYNTAX_CHAR macro and all comparisons
1006         to '\0' to use 0 instead.
1007         * cgen-dis.in (print_insn_normal): Ditto.
1008         * cgen-ibld.in (insert_insn_normal, extract_insn_normal): Ditto.
1009
1010 2001-01-05  Jan Hubicka  <jh@suse.cz>
1011
1012         * i386-dis.c: Add x86_64 support.
1013         (rex): New static variable.
1014         (REX_MODE64, REX_EXTX, REX_EXTY, REX_EXTZ): New constants.
1015         (USED_REX): New macro.
1016         (Ev, Ed, Rm, Iq, Iv64, Cm, Dm, Rm*, Ob64, Ov64): New macros.
1017         (OP_I64, OP_OFF64, OP_IMREG): New functions.
1018         (OP_REG, OP_OFF): Declare.
1019         (get64, get32, get32s): New functions.
1020         (r??_reg): New constants.
1021         (dis386_att): Change templates of instruction implicitly promoted
1022         to 64bit; change e?? to RMe?? for unwind RM byte instructions.
1023         (grps): Likewise.
1024         (dis386_intel): Likewise.
1025         (dixx86_64_att): New table based on dis386_att.
1026         (dixx86_64_intel): New table based on dis386_intel.
1027         (names64, names8rex): New global variable.
1028         (names32, names16): Add extended registers.
1029         (prefix_user_t): Recognize rex prefixes.
1030         (prefix_name): Print REX prefixes nicely.
1031         (op_riprel): New global variable.
1032         (start_pc): Set type to bfd_vma.
1033         (print_insn_i386): Detect the 64bit mode and use proper table;
1034         move ckprefix after initializing the buffer; output unused rex prefixes;
1035         output information about target of RIP relative addresses.
1036         (putop): Support 'O' and 'I'. Update handling of "P', 'Q', 'R' and 'S';
1037         (print_operand_value): New function.
1038         (OP_E, OP_G, OP_REG, OP_I, OP_J, OP_DIR, OP_OFF, OP_D): Add support for
1039         REX prefix and new modes.
1040         (get64, get32s): New.
1041         (get32): Return bfd_signed_vma type.
1042         (set_op): Initialize the op_riprel.
1043         * disassemble.c (disassembler): Recognize the x86-64 disassembly.
1044
1045 2001-01-03  Richard Sandiford  <r.sandiford@redhat.com>
1046
1047          cgen-dis.in (read_insn): Use bfd_get_bits()
1048
1049 2001-01-02  Richard Sandiford  <rsandifo@redhat.com>
1050
1051         * cgen-dis.c (hash_insn_array): Use bfd_put_bits().
1052         (hash_insn_list): Likewise
1053         * cgen-ibld.in (insert_1): Use bfd_put_bits() and bfd_get_bits().
1054         (extract_1): Use bfd_get_bits().
1055         (extract_normal): Apply sign extension to both extraction
1056         methods.
1057         * cgen-opc.c (cgen_get_insn_value): Use bfd_get_bits()
1058         (cgen_put_insn_value): Use bfd_put_bits()
1059
1060 2000-12-28  Frank Ch. Eigler  <fche@redhat.com>
1061
1062         * cgen-asm.in (parse_insn_normal): Print better error message for
1063         instructions with missing operands.
1064
1065 2000-12-21  Santeri Paavolainen <santtu@ssh.com>
1066
1067         * cgen-opc.c: Include alloca.h if HAVE_ALLOCA_H is defined.
1068
1069 2000-12-16  Nick Clifton  <nickc@redhat.com>
1070
1071         * Makefile.in: Regenerate.
1072         * aclocal.m4: Regenerate.
1073         * config.in: Regenerate.
1074         * configure.in: Add spacing.
1075         * configure: Regenerate.
1076         * ia64-asmtab.c: Regenerate.
1077         * po/opcodes.pot: Regenerate.
1078
1079 2000-12-12  Frank Ch. Eigler  <fche@redhat.com>
1080
1081         * cgen-asm.in (@arch@_cgen_assemble_insn): Prefer printing insert-time
1082         error messages over later parse-time ones.
1083
1084 2000-12-12  Jim Wilson  <wilson@redhat.com>
1085
1086         * ia64-dis.c (print_insn_ia64): Cast away const on ia64_free_opcode
1087         argument.
1088         * ia64-gen.c (insert_deplist): Cast sizeof result to int.
1089         (print_dependency_table): Print NULL if semantics field not set.
1090         (insert_opcode_dependencies): Mark cmp parameter as unused.
1091         (print_main_table): Use fprintf_vma to print long long fields.
1092         (main): Mark argv paramter as unused.  Convert to old style definition.
1093         * ia64-opc.c (ia64_find_dependency): Cast sizeof result to int.
1094         * ia64-asmtab.c: Regnerate.
1095
1096 2000-12-09  Nick Clifton  <nickc@redhat.com>
1097
1098         * m32r-dis.c (print_insn): Prevent re-read of instruction from
1099         wrong address.
1100
1101         * fr30-dis.c: Regenerate.
1102
1103 2000-12-08  Peter Targett  <peter.targett@arccores.com>
1104
1105         * configure.in: Add arc-ext.lo for bfd_arc_arch selection.
1106         * Makefile.am (C_FILES): Add arc-ext.c.
1107         (ALL_MACHINES) Add arc-ext.lo.
1108         (INCLUDES) Add opcode directory to list.
1109         New dependency entry for arc-ext.lo.
1110         * disassemble.c (disassembler): Correct call to
1111         arc_get_disassembler.
1112         * arc-opc.c: New update for ARC, including full base
1113         instructions for ARC variants.
1114         * arc-dis.h, arc-dis.c: New update for ARC, including
1115         extensibility functionality.
1116         * arc-ext.h, arc-ext.c: New files for handling extensibility.
1117
1118 2000-12-03  Chris Demetriou   cgd@sibyte.com
1119
1120         * mips-opc.c (mips_builtin_opcodes): Use the WR_HILO, RD_HILO,
1121         MOD_HILO, and MOD_LO macros.
1122
1123         * mips-opc.c (M1, M2): Delete.
1124         (mips_builtin_opcodes): Remove all uses of M1.
1125
1126         * mips-opc.c (mips_builtin_opcodes): Make the dmfc2 and dmtc2
1127         instructions take "G" format second operands and use the
1128         correct flags.
1129         There are mfc3 and mtc3 opcodes, so add dmfc3 and dmtc3 opcodes to
1130         match.
1131         Delete "sel" code operands from mfc1 and mtc1.
1132         Add MIPS64 opcode changes (dclo, dclz), and "sel" code variants
1133         for dm[ft]c[023].
1134
1135 2000-12-03  Ed Satterthwaite  ehs@sibyte.com  and
1136             Chris Demetriou   cgd@sibyte.com
1137
1138         * mips-opc.c (mips_builtin_opcodes): Finish additions
1139         for MIPS32 support, and clean up existing entries for
1140         aesthetics, consistency with the MIPS32 ISA, and
1141         with consistency the rest of the table.
1142
1143 2000-12-01  Nick Clifton  <nickc@redhat.com>
1144
1145         * mips16-opc.c (mips16_opcodes): Add initialiser for membership
1146         field.
1147
1148 2000-12-01  Chris Demetriou <cgd@sibyte.com>
1149
1150         mips-dis.c (print_insn_arg): Handle new 'U' and 'J' argument
1151         specifiers.  Update 'B' for new constant names, and remove
1152         'm'.
1153         mips-opc.c (mips_builtin_opcodes): Place "pref" and "ssnop"
1154         near the top of the array, so they are disassembled properly.
1155         Enable "ssnop" for MIPS32.  Add "break" variant with 20 bit
1156         code for MIPS32.  Update "clo" and "clz" to use 'U' operand
1157         specifier.  Add 'H' format specifier variants for "mfc1,"
1158         "mfc2," "mfc3," "mtc1," "mtc2," and "mtc3" for MIPS32.  Update
1159         MIPS32 "sdbbp" to use 'B' operand specifier.  Add MIPS32
1160         "wait" variant which uses 'J' operand specifier.
1161
1162         * mips-dis.c (set_mips_isa_type): Update to use
1163         CPU_UNKNOWN and ISA_* constants.  Add bfd_mach_mips32 case.
1164         Replace bfd_mach_mips4K with bfd_mach_mips32_4k case.
1165         * mips-opc.c (I32): New constant for instructions added in
1166         MIPS32.
1167         (P4): Delete.
1168         (mips_builtin_opcodes) Replace all uses of P4 with I32.
1169
1170         * mips-dis.c (set_mips_isa_type): Add cases for
1171         bfd_mach_mips5 and bfd_mach_mips64.
1172         * mips-opc.c (I64): New definitions.
1173
1174         * mips-dis.c (set_mips_isa_type): Add case for
1175         bfd_mach_mips_sb1.
1176
1177 2000-11-28  Hans-Peter Nilsson  <hp@bitrange.com>
1178
1179         * sh-dis.c (print_insn_ddt): Make insn_x, insn_y unsigned.
1180         (print_insn_ppi): Make nib1, nib2, nib3 unsigned.
1181         Initialize variable dc to NULL.
1182         (print_insn_shx): Remove unused label d_reg_n.
1183
1184 2000-11-24  Nick Clifton  <nickc@redhat.com>
1185
1186         * arm-opc.h: Add new opcode formatting parameter 'B'.
1187         (arm_opcodes): Add XScale, v5, and v5te instructions.
1188         (thumb_opcodes): Add v5t instructions.
1189
1190         * arm-dis.c (print_insn_arm): Handle new 'B' format
1191         parameter.
1192         (print_insn_thumb): Decode BLX(1) instruction.
1193
1194 2000-11-21  Chris Demetriou  <cgd@sibyte.com>
1195
1196         * mips-opc.c: Fix file header comment.
1197
1198 2000-11-14  Hans-Peter Nilsson  <hp@axis.com>
1199
1200         * cris-dis.c (cris_get_disassembler): If abfd is NULL, return
1201         print_insn_cris_with_register_prefix.
1202
1203 2000-11-11  Alexandre Oliva  <aoliva@redhat.com>
1204
1205         * sh-opc.h: The operand of `mov.w r0, (<disp>,GBR)' is IMM1, not 0.
1206
1207 2000-11-07  Matthew Green  <mrg@redhat.com>
1208
1209         * cgen-dis.in (print_insn): All insns which can fit into insn_value
1210         must be loaded there in their entirety.
1211
1212 2000-10-20  Jakub Jelinek  <jakub@redhat.com>
1213
1214         * sparc-dis.c (v9a_asr_reg_names): Add v9b ASRs.
1215         (compute_arch_mask): Add v8plusb and v9b machines.
1216         (print_insn_sparc): siam mode decoding, accept ASRs up to 25.
1217         * sparc-opc.c: Support for Cheetah instruction set.
1218         (prefetch_table): Add #invalidate.
1219
1220 2000-10-16  Nick Clifton  <nickc@redhat.com>
1221
1222         * mcore-dis.c (imsk): Change mask for OC to 0xFE00.
1223
1224 2000-10-06  Dave Brolley  <brolley@redhat.com>
1225
1226         * fr30-desc.h: Regenerate.
1227         * m32r-desc.h: Regenerate.
1228         * m32r-ibld.c: Regenerate.
1229
1230 2000-10-05  Jim Wilson  <wilson@redhat.com>
1231
1232         * ia64-ic.tbl: Update from Intel.
1233         * ia64-asmtab.c: Regenerate.
1234
1235 2000-10-04  Kazu Hirata  <kazu@hxi.com>
1236
1237         * ia64-gen.c: Convert C++-style comments to C-style comments.
1238         * tic54x-dis.c: Likewise.
1239
1240 2000-09-29  Hans-Peter Nilsson  <hp@axis.com>
1241
1242         Changes to add dollar prefix to registers for files where user symbols
1243         don't have a leading underscore.  Fix formatting.
1244         * cris-dis.c (REGISTER_PREFIX_CHAR): New.
1245         (format_reg): Add parameter with_reg_prefix.  All callers changed.
1246         (print_with_operands): Ditto.
1247         (print_insn_cris_generic): Renamed from print_insn_cris, add
1248         parameter with_reg_prefix.
1249         (print_insn_cris_with_register_prefix,
1250         print_insn_cris_without_register_prefix, cris_get_disassembler):
1251         New.
1252         * disassemble.c (disassembler) [ARCH_cris]: Call cris_get_disassembler.
1253
1254 2000-09-22  Jim Wilson  <wilson@redhat.com>
1255
1256         * ia64-opc-f.c (ia64_opcodes_f): Add fpcmp pseudo-ops for
1257         gt, ge, ngt, and nge.
1258         * ia64-asmtab.c: Regenerate.
1259
1260         * ia64-dis.c (print_insn_ia64): Revert Aug 7 byte skip count change.
1261         * ia64-gen.c (parse_semantics): Handle IA64_DVS_STOP.
1262         (lookup_specifier): Handle "PR%, 1 to 15" and "PR%, 16 to 62".
1263         * ia64-ic.tbl, ia64-raw.tbl, ia64-war.tbl, ia64-waw.tbl: Update.
1264         * ia64-asmtab.c: Regnerate.
1265
1266 2000-09-13  Anders Norlander  <anorland@acc.umu.se>
1267
1268         * mips-opc.c (mips_builtin_opcodes): Support cache instruction on 4K cores.
1269         Add mfc0 and mtc0 with sub-selection values.
1270         Add clo and clz opcodes.
1271         Add msub and msubu instructions for MIPS32.
1272         Add madd/maddu aliases for mad/madu for MIPS32.
1273         Support wait, deret, eret, movn, pref for MIPS32.
1274         Support tlbp, tlbr, tlbwi, tlbwr.
1275         (P4): New define.
1276
1277         * mips-dis.c (print_insn_arg): Print sdbbp 'm' args.
1278         (print_insn_arg): Handle 'H' args.
1279         (set_mips_isa_type): Recognize 4K.
1280         Use CPU_* defines instead of hardcoded numbers.
1281
1282 2000-09-11  Catherine Moore <clm@redhat.com>
1283
1284         * d30v-opc.c (d30v_operand_t): New operand type Rb2.
1285         (d30v_format_tab): Use Rb2 for modinc and moddec.
1286
1287 2000-09-07  Catherine Moore  <clm@redhat.com>
1288
1289         * d30v-opc.c (d30v_format_tab): Use format Ra for
1290         modinc and moddec.
1291
1292 2000-09-06  Alexandre Oliva  <aoliva@redhat.com>
1293
1294         * configure: Rebuilt with new libtool.m4.
1295
1296 2000-09-05  Nick Clifton  <nickc@redhat.com>
1297
1298         * configure: Regenerate.
1299         * po/opcodes.pot: Regenerate.
1300
1301 2000-08-31  Alexandre Oliva  <aoliva@redhat.com>
1302
1303         * acinclude.m4: Include libtool and gettext macros from the
1304         top level.
1305         * aclocal.m4, configure: Rebuilt.
1306
1307 2000-08-30  Kazu Hirata  <kazu@hxi.com>
1308
1309         * tic80-dis.c: Fix formatting.
1310
1311 2000-08-29  Kazu Hirata  <kazu@hxi.com>
1312
1313         * w65-dis.c: Fix formatting.
1314
1315 2000-08-28  Mark Hatle  <mhatle@mvista.com>
1316
1317         * ppc-opc.c: Add XTLB macro for a few PPC 4xx extended mnemonics.
1318         (powerpc_opcodes): Add table entries for PPC 405 instructions.
1319         Changed rfci, icbt, mfdcr, dccci, mtdcr, iccci from PPC to PPC403
1320         instructions.  Added extended mnemonic mftbl as defined in the
1321         405GP manual for all PPCs.
1322
1323 2000-08-28  Jim Wilson  <wilson@redhat.com>
1324
1325         * ia64-dis.c (print_insn_ia64): Add failed label after ia64_free_opcode
1326         call.  Change last goto to use failed instead of done.
1327
1328 2000-08-28  Dave Brolley  <brolley@redhat.com>
1329
1330         * cgen-ibld.in (cgen_put_insn_int_value): New function.
1331         (insert_normal): Allow for non-zero word_offset with CGEN_INT_INSN_P.
1332         (insert_insn_normal): Use cgen_put_insn_int_value with CGEN_INT_INSN_P.
1333         (extract_normal): Allow for non-zero word_offset with CGEN_INT_INSN_P.
1334         * cgen-dis.in (read_insn): New static function.
1335         (print_insn): Use read_insn to read the insn into the buffer and set
1336         up for disassembly.
1337         (print_insn): in CGEN_INT_INSN_P, make sure that the entire insn is
1338         in the buffer.
1339         * fr30-asm.c: Regenerated.
1340         * fr30-desc.c: Regenerated.
1341         * fr30-desc.h: Regenerated.
1342         * fr30-dis.c: Regenerated.
1343         * fr30-ibld.c: Regenerated.
1344         * fr30-opc.c: Regenerated.
1345         * fr30-opc.h: Regenerated.
1346         * m32r-asm.c: Regenerated.
1347         * m32r-desc.c: Regenerated.
1348         * m32r-desc.h: Regenerated.
1349         * m32r-dis.c: Regenerated.
1350         * m32r-ibld.c: Regenerated.
1351         * m32r-opc.c: Regenerated.
1352
1353 2000-08-28  Kazu Hirata  <kazu@hxi.com>
1354
1355         * tic30-dis.c: Fix formatting.
1356
1357 2000-08-27  Kazu Hirata  <kazu@hxi.com>
1358
1359         * sh-dis.c: Fix formatting.
1360
1361 2000-08-24  David Edelsohn  <dje@watson.ibm.com>
1362
1363         * ppc-opc.c (powerpc_opcodes): Add rfid, mtsrd, mtsrdin, mtmsrd.
1364
1365 2000-08-24  Kazu Hirata  <kazu@hxi.com>
1366
1367         * z8k-dis.c: Fix formatting.
1368
1369 2000-08-16  Jim Wilson  <wilson@redhat.com>
1370
1371         * ia64-ic.tbl (pr-readers-nobr-nomovpr): Add addl, adds.  Delete
1372         break, mov-immediate, nop.
1373         * ia64-opc-f.c: Delete fpsub instructions.
1374         * ia64-opc-m.c: Add POSTINC to all instructions with postincrement
1375         address operand.  Rewrite using macros to avoid long lines.
1376         * ia64-opc.h (POSTINC): Define.
1377         * ia64-asmtab.c: Regenerate.
1378
1379 2000-08-15  Jim Wilson  <wilson@redhat.com>
1380
1381         * ia64-ic.tbl: Add missing entries.
1382
1383 2000-08-08  Jason Eckhardt  <jle@redhat.com>
1384
1385         * i860-dis.c (print_br_address): Change third argument from int
1386         to long.
1387
1388 2000-08-07  Richard Henderson  <rth@redhat.com>
1389
1390         * ia64-dis.c (print_insn_ia64): Get byte skip count correct
1391         for MLI templates.  Handle IA64_OPND_TGT64.
1392
1393 2000-08-04  Ben Elliston  <bje@redhat.com>
1394
1395         * cgen-dis.in, cgen-asm.in, cgen-ibld.in: New files.
1396         * cgen.sh: Likewise.
1397
1398 2000-08-02  Jim Wilson  <wilson@redhat.com>
1399
1400         * ia64-dis.c (print_insn_ia64): Call ia64_free_opcode at end.
1401
1402 2000-07-29  Marek Michalkiewicz  <marekm@linux.org.pl>
1403
1404         * avr-dis.c (avr_operand): Use PARAMS macro in declaration.
1405         Change return type from void to int.  Check the combination
1406         of operands, return 1 if valid.  Fix to avoid BUF overflow.
1407         Report undefined combinations of operands in COMMENT.
1408         Report internal errors to stderr.  Output the adiw/sbiw
1409         constant operand in both decimal and hex.
1410         (print_insn_avr): Disassemble ldd/std with displacement of 0
1411         as ld/st.  Check avr_operand () return value, handle invalid
1412         combinations of operands like unknown opcodes.
1413
1414 2000-07-28  Ben Elliston  <bje@redhat.com>
1415
1416         * Makefile.am (CGEN, CGENDEPS, CGENDIR, CGENFLAGS): New.
1417         (run-cgen, stamp-m32r, stamp-fr30): New targets.
1418         * Makefile.in: Regenerate.
1419         * configure.in: Add --enable-cgen-maint option.
1420         * configure: Regenerate.
1421
1422 2000-07-26  Dave Brolley  <brolley@redhat.com>
1423
1424         * cgen-opc.c (cgen_hw_lookup_by_name): 'i' is now unsigned.
1425         (cgen_hw_lookup_by_num): Ditto.
1426         (cgen_operand_lookup_by_name): Ditto.
1427         (print_address): Ditto.
1428         (print_keyword): Ditto.
1429         * cgen-dis.c (hash_insn_array): Mark unused parameters with
1430         ATTRIBUTE_UNUSED.
1431         * cgen-asm.c (hash_insn_array): Mark unused parameters with
1432         ATTRIBUTE_UNUSED.
1433         (cgen_parse_keyword): Ditto.
1434
1435 2000-07-22  Jason Eckhardt  <jle@redhat.com>
1436
1437         * i860-dis.c: New file.
1438         (print_insn_i860): New function.
1439         (print_br_address): New function.
1440         (sign_extend): New function.
1441         (BITWISE_OP): New macro.
1442         (I860_REG_PREFIX): New macro.
1443         (grnames, frnames, crnames): New structures.
1444
1445         * disassemble.c (ARCH_i860): Define.
1446         (disassembler): Add check for bfd_arch_i860 to set disassemble
1447         function to print_insn_i860.
1448
1449         * Makefile.in (CFILES): Added i860-dis.c.
1450         (ALL_MACHINES): Added i860-dis.lo.
1451         (i860-dis.lo): New dependences.
1452
1453         * configure.in: New bits for bfd_i860_arch.
1454
1455         * configure: Regenerated.
1456
1457 2000-07-20  Hans-Peter Nilsson  <hp@axis.com>
1458
1459         * Makefile.am (CFILES): Add cris-dis.c and cris-opc.c.
1460         (ALL_MACHINES): Add cris-dis.lo and cris-opc.lo.
1461         (cris-dis.lo, cris-opc.lo): New rules.
1462         * Makefile.in: Rebuild.
1463         * configure.in (bfd_cris_arch): New target.
1464         * configure: Rebuild.
1465         * disassemble.c (ARCH_cris): Define.
1466         (disassembler): Support ARCH_cris.
1467         * cris-dis.c, cris-opc.c: New files.
1468         * po/POTFILES.in, po/opcodes.pot: Regenerate.
1469
1470 2000-07-11  Jakub Jelinek  <jakub@redhat.com>
1471
1472         * sparc-opc.c (sparc_opcodes): popc has 0 in rs1, not rs2.
1473         Reported by Bill Clarke <llib@computer.org>.
1474
1475 2000-07-09  Geoffrey Keating  <geoffk@redhat.com>
1476
1477         * ppc-opc.c (powerpc_opcodes): Correct suffix for vslw.
1478         Patch by Randall J Fisher <rfisher@ecn.purdue.edu>.
1479
1480 2000-07-09  Alan Modra  <alan@linuxcare.com.au>
1481
1482         * hppa-dis.c (fput_reg, fput_fp_reg, fput_fp_reg_r, fput_creg,
1483         fput_const, extract_3, extract_5_load, extract_5_store,
1484         extract_5r_store, extract_5R_store, extract_10U_store,
1485         extract_5Q_store, extract_11, extract_14, extract_16, extract_21,
1486         extract_12, extract_17, extract_22): Prototype.
1487         (print_insn_hppa): Rename inner block opcode -> opc to avoid
1488         shadowing outer block.
1489         (GET_BIT): Define.
1490
1491 2000-07-05  DJ Delorie  <dj@redhat.com>
1492
1493         * MAINTAINERS: new
1494
1495 2000-07-04  Alexandre Oliva  <aoliva@redhat.com>
1496
1497         * arm-dis.c (print_insn_arm): Output combinations of PSR flags.
1498
1499 2000-07-03  Marek Michalkiewicz  <marekm@linux.org.pl>
1500
1501         * avr-dis.c (avr_operand): Change _ () to _() around all strings
1502         marked for translation (exception from the usual coding style).
1503         (print_insn_avr): Initialize insn2 to avoid warnings.
1504
1505 2000-07-03  Kazu Hirata  <kazu@hxi.com>
1506
1507         * h8300-dis.c (bfd_h8_disassemble): Improve readability.
1508         * h8500-dis.c: Fix formatting.
1509
1510 2000-07-01  Alan Modra  <alan@linuxcare.com.au>
1511
1512         * Makefile.am (DEP): Fix 2000-06-22.  grep after running dep.sed
1513         (CLEANFILES): Add DEPA.
1514         * Makefile.in: Regenerate.
1515
1516 2000-06-26  Scott Bambrough  <scottb@netwinder.org>
1517
1518         * arm-dis.c (regnames): Add an additional register set to match
1519         the set used by GCC.  Make it the default.
1520
1521 2000-06-22  Alan Modra  <alan@linuxcare.com.au>
1522
1523         * Makefile.am (DEP): grep for leading `/' in DEP1, and fail if we
1524         find one.
1525         * Makefile.in: Regenerate.
1526
1527 2000-06-20  H.J. Lu  <hjl@gnu.org>
1528
1529         * Makefile.am: Rebuild dependency.
1530         * Makefile.in: Rebuild.
1531
1532 2000-06-18  Stephane Carrez  <stcarrez@worldnet.fr>
1533
1534         * Makefile.in, configure: regenerate
1535         * disassemble.c (disassembler): Recognize ARCH_m68hc12,
1536         ARCH_m68hc11.
1537         * m68hc11-dis.c (read_memory, print_insn, print_insn_m68hc12):
1538         New functions.
1539         * configure.in: Recognize m68hc12 and m68hc11.
1540         * m68hc11-dis.c, m68hc11-opc.c: New files for support of m68hc1x
1541         * Makefile.am (CFILES, ALL_MACHINES): New files for disassembly
1542         and opcode generation for m68hc11 and m68hc12.
1543
1544 2000-06-16  Nick Duffek  <nsd@redhat.com>
1545
1546         * disassemble.c (disassembler): Refer to the PowerPC 620 using
1547         bfd_mach_ppc_620 instead of 620.
1548
1549 2000-06-12  Kazu Hirata  <kazu@hxi.com>
1550
1551         * h8300-dis.c: Fix formatting.
1552         (bfd_h8_disassemble): Distinguish adds/subs, inc/dec.[wl]
1553         correctly.
1554
1555 2000-06-09  Denis Chertykov  <denisc@overta.ru>
1556
1557         * avr-dis.c (avr_operand): Bugfix for jmp/call address.
1558
1559 2000-06-07  Denis Chertykov  <denisc@overta.ru>
1560
1561         * avr-dis.c: completely rewritten.
1562
1563 2000-06-02  Kazu Hirata  <kazu@hxi.com>
1564
1565         * h8300-dis.c: Follow the GNU coding style.
1566         (bfd_h8_disassemble) Fix a typo.
1567
1568 2000-06-01  Kazu Hirata  <kazu@hxi.com>
1569
1570         * h8300-dis.c (bfd_h8_disassemble_init): Fix a typo.
1571         (bfd_h8_disassemble): Distinguish the operand size of inc/dev.[wl]
1572         correctly.  Fix a typo.
1573
1574 2000-05-31  Nick Clifton  <nickc@redhat.com>
1575
1576         * opintl.h (_(String)): Explain why dgettext is used instead of
1577         gettext.
1578
1579 2000-05-30  Nick Clifton  <nickc@redhat.com>
1580
1581         * opintl.h (gettext, dgettext, dcgettext, textdomain,
1582         bindtextdomain): Replace defines with those from intl/libgettext.h
1583         to quieten gcc warnings.
1584
1585 2000-05-26  Alan Modra  <alan@linuxcare.com.au>
1586
1587         * Makefile.am: Update dependencies with "make dep-am"
1588         * Makefile.in: Regenerate.
1589
1590 2000-05-25  Alexandre Oliva  <aoliva@redhat.com>
1591
1592         * m10300-dis.c (disassemble): Don't assume 32-bit longs when
1593         sign-extending operands.
1594
1595 2000-05-15  Donald Lindsay  <dlindsay@redhat.com>
1596
1597         * d10v-opc.c (d10v_opcodes): add ALONE tag to all short branches
1598         except brf's.
1599
1600 2000-05-21  Nick Clifton  <nickc@redhat.com>
1601
1602         * Makefile.am (LIBIBERTY): Define.
1603
1604 2000-05-19 Diego Novillo <dnovillo@redhat.com>
1605
1606         * mips-dis.c (REGISTER_NAMES): Rename to STD_REGISTER_NAMES.
1607         (STD_REGISTER_NAMES): New name for REGISTER_NAMES.
1608         (reg_names): Rename to std_reg_names. Change it to a char **
1609         static variable.
1610         (std_reg_names): New name for reg_names.
1611         (set_mips_isa_type): Set reg_names to point to std_reg_names by
1612         default.
1613
1614 2000-05-16  Frank Ch. Eigler  <fche@redhat.com>
1615
1616         * fr30-desc.h: Partially regenerated to account for changed
1617         CGEN_MAX_* -> CGEN_ACTUAL_MAX_* macros.
1618         * m32r-desc.h: Ditto.
1619
1620 2000-05-15  Nick Clifton  <nickc@redhat.com>
1621
1622         * arm-opc.h: Use upper case for flasg in MSR and MRS
1623         instructions.  Allow any bit to be set in the field_mask of
1624         the MSR instruction.
1625
1626         * arm-dis.c (print_insn_arm): Decode _x and _s bits of the
1627         field_mask of an MSR instruction.
1628
1629 2000-05-11  Thomas de Lellis  <tdel@windriver.com>
1630
1631         * arm-opc.h: Disassembly of thumb ldsb/ldsh
1632         instructions changed to ldrsb/ldrsh.
1633
1634 2000-05-11  Ulf Carlsson  <ulfc@engr.sgi.com>
1635
1636         * mips-dis.c (print_insn_arg): Don't mask top 32 bits of 64-bit
1637         target addresses for 'jal' and 'j'.
1638
1639 2000-05-10  Geoff Keating  <geoffk@redhat.com>
1640
1641         * ppc-opc.c (powerpc_opcodes): Make the predicted-branch opcodes
1642         also available in common mode when powerpc syntax is being used.
1643
1644 2000-05-08  Alan Modra  <alan@linuxcare.com.au>
1645
1646         * m68k-dis.c (dummy_printer): Add ATTRIBUTE_UNUSED to args.
1647         (dummy_print_address): Ditto.
1648
1649 2000-05-04  Timothy Wall  <twall@redhat.com>
1650
1651         * tic54x-opc.c: New.
1652         * tic54x-dis.c: New.
1653         * disassemble.c (disassembler): Add ARCH_tic54x.
1654         * configure.in: Added tic54x target.
1655         * configure: Ditto.
1656         * Makefile.am: Add tic54x dependencies.
1657         * Makefile.in: Ditto.
1658
1659 2000-05-03  J.T. Conklin  <jtc@redback.com>
1660
1661         * ppc-opc.c (VA, VB, VC, VD, VS, SIMM, UIMM, SHB): New macros, for
1662         vector unit operands.
1663         (VX, VX_MASK, VXA, VXA_MASK, VXR, VXR_MASK): New macros, for vector
1664         unit instruction formats.
1665         (PPCVEC): New macro, mask for vector instructions.
1666         (powerpc_operands): Add table entries for above operand types.
1667         (powerpc_opcodes): Add table entries for vector instructions.
1668
1669         * ppc-dis.c (print_insn_big_powerpc): Add PPC_OPCODE_ALTIVEC to mask.
1670         (print_insn_little_powerpc): Likewise.
1671         (print_insn_powerpc): Prepend 'v' when printing vector registers.
1672
1673 2000-04-24  Clinton Popetz  <cpopetz@redhat.com>
1674
1675         * configure.in: Add bfd_powerpc_64_arch.
1676         * disassemble.c (disassembler): Use print_insn_big_powerpc for
1677         64 bit code.
1678
1679 2000-04-24  Nick Clifton  <nickc@redhat.com>
1680
1681         * fr30-desc.c (fr30_cgen_cpu_open): Initialise signed_overflow
1682         field.
1683
1684 2000-04-23  Denis Chertykov  <denisc@overta.ru>
1685
1686         * avr-dis.c (reg_fmul_d): New. Extract destination register from
1687         FMUL instruction.
1688         (reg_fmul_r): New. Extract source register from FMUL instruction.
1689         (reg_muls_d): New. Extract destination register from MULS instruction.
1690         (reg_muls_r): New. Extract source register from MULS instruction.
1691         (reg_movw_d): New. Extract destination register from MOVW instruction.
1692         (reg_movw_r): New. Extract source register from MOVW instruction.
1693         (print_insn_avr): Handle MOVW, MULS, MULSU, FMUL, FMULS, FMULSU,
1694         EICALL, EIJMP, LPM r,Z, ELPM r,Z, SPM, ESPM instructions.
1695
1696 2000-04-22  Timothy Wall  <twall@redhat.com>
1697
1698         * ia64-gen.c (general): Add an ordered table of primary
1699         opcode names, as well as priority fields to disassembly data
1700         structures to enforce a preferred disassembly format based on the
1701         ordering of the opcode tables.
1702         (load_insn_classes): Show a useful message if IC tables are missing.
1703         (load_depfile): Ditto.
1704         * ia64-asmtab.h (struct ia64_dis_names ): Add priority flag to
1705         distinguish preferred disassembly.
1706         * ia64-opc-f.c: Reorder some insn for preferred disassembly
1707         format.  Fix incorrect flag on fma.s/fma.s.s0.
1708         * ia64-opc.c: Scan *all* disassembly matches and use the one with
1709         the highest priority.
1710         * ia64-opc-b.c: Use more abbreviations.
1711         * ia64-asmtab.c: Regenerate.
1712
1713 2000-04-21  Jason Eckhardt  <jle@redhat.com>
1714
1715         * hppa-dis.c (extract_16): New function.
1716         (print_insn_hppa): Fix incorrect handling of 'fe'. Added handling of
1717         new operand types l,y,&,fe,fE,fx.
1718
1719 2000-04-21  Richard Henderson  <rth@redhat.com>
1720             David Mosberger  <davidm@hpl.hp.com>
1721             Timothy Wall <twall@redhat.com>
1722             Bob Manson  <manson@charmed.cygnus.com>
1723             Jim Wilson  <wilson@redhat.com>
1724
1725         * Makefile.am (HFILES): Add ia64-asmtab.h, ia64-opc.h.
1726         (CFILES): Add ia64-dis.c, ia64-opc-a.c, ia64-opc-b.c, ia64-opc-f.c,
1727         ia64-opc-i.c, ia64-opc-m.c, ia64-opc-d.c, ia64-opc.c, ia64-gen.c,
1728         ia64-asmtab.c.
1729         (ALL_MACHINES): Add ia64-dis.lo, ia64-opc.lo.
1730         (ia64-ic.tbl, ia64-raw.tbl, ia64-waw.tbl, ia64-war.tbl, ia64-gen,
1731         ia64-gen.o, ia64-asmtab.c, ia64-dis.lo, ia64-opc.lo): New rules.
1732         * Makefile.in: Rebuild.
1733         * configure Rebuild.
1734         * configure.in (bfd_ia64_arch): New target.
1735         * disassemble.c (ARCH_ia64): Define.
1736         (disassembler): Support ARCH_ia64.
1737         * ia64-asmtab.c, ia64-asmtab.h, ia64-dis.c, ia64-gen.c ia64-ic.tbl,
1738         ia64-opc-a.c, ia64-opc-b.c, ia64-opc-d.c ia64-opc-f.c, ia64-opc-i.c,
1739         ia64-opc-m.c, ia64-opc-x.c, ia64-opc.c, ia64-opc.h, ia64-raw.tbl,
1740         ia64-war.tbl, ia64-waw.tbl: New files.
1741
1742 2000-04-20  Alexandre Oliva  <aoliva@redhat.com>
1743
1744         * m10300-dis.c (HAVE_AM30, HAVE_AM33): Define.
1745         (disassemble): Use them.
1746
1747 2000-04-14  Alan Modra  <alan@linuxcare.com.au>
1748
1749         * sysdep.h: Include "ansidecl.h" not <ansidecl.h>
1750         * Makefile.am: Update dependencies.
1751         * Makefile.in: Regenerate.
1752
1753 2000-04-14  Michael Sokolov  <msokolov@ivan.Harhan.ORG>
1754
1755         * a29k-dis.c, alpha-dis.c, alpha-opc.c, arc-dis.c, arc-opc.c,
1756         avr-dis.c, d10v-dis.c, d10v-opc.c, d30v-dis.c, d30v-opc.c,
1757         disassemble.c, h8300-dis.c, h8500-dis.c, hppa-dis.c, i370-dis.c,
1758         i370-opc.c, i960-dis.c, m10200-dis.c, m10200-opc.c, m10300-dis.c,
1759         m10300-opc.c, m68k-dis.c, m68k-opc.c, m88k-dis.c, mcore-dis.c,
1760         mips-dis.c, mips-opc.c, mips16-opc.c, pj-dis.c, pj-opc.c,
1761         ppc-dis.c, ppc-opc.c, sh-dis.c, sparc-dis.c, sparc-opc.c,
1762         tic80-dis.c, tic80-opc.c, v850-dis.c, v850-opc.c, vax-dis.c,
1763         w65-dis.c, z8k-dis.c, z8kgen.c: Include sysdep.h.  Remove
1764         ansidecl.h as sysdep.h includes it.
1765
1766 2000-04-7  Andrew Cagney  <cagney@b1.redhat.com>
1767
1768         * configure.in (WARN_CFLAGS): Set to -W -Wall by default.  Add
1769         --enable-build-warnings option.
1770         * Makefile.am (AM_CFLAGS, WARN_CFLAGS): Add definitions.
1771         * Makefile.in, configure: Re-generate.
1772
1773 2000-04-05  J"orn Rennecke <amylaar@redhat.com>
1774
1775         * sh-opc.h (sh_table): Use A_DISP_PC / PCRELIMM_8BY2 for ldre & ldrs.
1776         stc GBR,@-<REG_N> is available for arch_sh1_up.
1777         Group parallel processing insn with identical mnemonics together.
1778         Make three-operand psha / pshl come first.
1779
1780 2000-04-05  J"orn Rennecke <amylaar@redhat.co.uk>
1781
1782         * sh-opc.h (sh_nibble_type): Remove DISP_8 and DISP_4.
1783         Split IMM_[48]{,BY[24]} into IMM[01]_[48]{,BY[24]}.  Add REPEAT.
1784         (sh_arg_type): Add A_PC.
1785         (sh_table): Update entries using immediates.  Add repeat.
1786         * sh-dis.c (print_insn_shx): Remove DISP_8 and DISP_4.
1787         Split IMM_[48]{,BY[24]} into IMM[01]_[48]{,BY[24]}.  Add REPEAT.
1788
1789 2000-04-04  Alan Modra  <alan@linuxcare.com.au>
1790
1791         * po/opcodes.pot: Regenerate.
1792
1793         * Makefile.am (MKDEP): Use gcc -MM rather than mkdep.
1794         (DEP): Quote when passing vars to sub-make.  Add warning message
1795         to end.
1796         (DEP1): Rewrite for "gcc -MM".
1797         (CLEANFILES): Add DEP2.
1798         Update dependencies.
1799         * Makefile.in: Regenerate.
1800
1801 2000-04-03  Denis Chertykov  <denisc@overta.ru>
1802
1803         * avr-dis.c: Syntax cleanup.
1804         (add0fff): Print the pc relative address as a signed number.
1805         (add03f8): Likewise.
1806
1807 2000-04-01  Ian Lance Taylor  <ian@zembu.com>
1808
1809         * disassemble.c (disassembler_usage): Don't use a prototype.  Mark
1810         the parameter ATTRIBUTE_UNUSED.
1811         * ppc-opc.c: Add ATTRIBUTE_UNUSED as needed.
1812
1813 2000-04-01  Alexandre Oliva  <aoliva@redhat.com>
1814
1815         * m10300-opc.c: SP-based offsets are always unsigned.
1816
1817 2000-03-29  Thomas de Lellis  <tdel@windriver.com>
1818
1819         * arm-opc.h (thumb_opcodes): Disassemble 0xde.. to "bal"
1820         [branch always] instead of "undefined".
1821
1822 2000-03-27  Nick Clifton  <nickc@redhat.com>
1823
1824         * d30v-opc.c (d30v_format_table): Move SHORT_AR to end of list of
1825         short instructions, from end of list of long instructions.
1826
1827 2000-03-27  Ian Lance Taylor  <ian@zembu.com>
1828
1829         * Makefile.am (CFILES): Add avr-dis.c.
1830         (ALL_MACHINES): Add avr-dis.lo.
1831
1832 2000-03-27  Alan Modra  <alan@linuxcare.com>
1833
1834         * avr-dis.c (add0fff, add03f8): Don't use structure bitfields to
1835         truncate integers.
1836         (print_insn_avr): Call function via pointer in K&R compatible way.
1837         (dispLDD, regPP, reg50, reg104, reg40, reg20w, lit404, lit204,
1838         add0fff, add03f8): Convert to old style function declaration and
1839         add prototype.
1840         (avrdis_opcode): Add prototype.
1841
1842 2000-03-27  Denis Chertykov  <denisc@overta.ru>
1843
1844         * avr-dis.c: New file.  AVR disassembler.
1845         * configure.in (bfd_avr_arch): New architecture support.
1846         * disassemble.c: Likewise.
1847         * configure: Regenerate.
1848
1849 2000-03-06  J"oern Rennecke <amylaar@redhat.com>
1850
1851         * sh-opc.h (sh_table): ldre and ldrs have a *signed* displacement.
1852
1853 2000-03-02  J"orn Rennecke <amylaar@redhat.co.uk>
1854
1855         * d30v-dis.c (print_insn): Remove d*i hacks.  Use per-operand
1856         flag to determine if operand is pc-relative.
1857         * d30v-opc.c:
1858         (d30v_format_table):
1859         (REL6S3): Renamed from IMM6S3.
1860         Added flag OPERAND_PCREL.
1861         (REL12S3, REL18S3, REL32): Split from IMM12S3, IMM18S3, REL32, with
1862         added flag OPERAND_PCREL.
1863         (IMM12S3U): Replaced with REL12S3.
1864         (SHORT_D2, LONG_D): Delay target is pc-relative.
1865         (SHORT_B2r, SHORT_B3r, SHORT_B3br, SHORT_D2r, LONG_Ur, LONG_2r):
1866         Split from SHORT_B2, SHORT_D2, SHORT_B3b, SHORT_D2, LONG_U, LONG_2r,
1867         using the REL* operands.
1868         (LONG_2br, LONG_Dr): Likewise, from LONG_2b, LONG_D.
1869         (SHORT_D1r, SHORT_D2Br, LONG_Dbr): Renamed from SHORT_D1, SHORT_D2B,
1870         LONG_Db, using REL* operands.
1871         (SHORT_U, SHORT_A5S): Removed stray alternatives.
1872         (d30v_opcode_table): Use new *r formats.
1873
1874 2000-02-28  Nick Clifton  <nickc@redhat.com>
1875
1876         * m32r-desc.c (m32r_cgen_cpu_open): Replace 'flags' with
1877         'signed_overflow_ok_p'.
1878
1879 2000-02-27  Eli Zaretskii  <eliz@is.elta.co.il>
1880
1881         * Makefile.am (stamp-lib): Use $(LIBTOOL) --config to get the
1882         name of the libtool directory.
1883         * Makefile.in: Rebuild.
1884
1885 2000-02-24  Nick Clifton  <nickc@redhat.com>
1886
1887         * cgen-opc.c (cgen_set_signed_overflow_ok): New function.
1888         (cgen_clear_signed_overflow_ok): New function.
1889         (cgen_signed_overflow_ok_p): New function.
1890
1891 2000-02-23  Andrew Haley  <aph@redhat.com>
1892
1893         * m32r-asm.c, m32r-desc.c, m32r-desc.h, m32r-dis.c,
1894         m32r-ibld.c, m32r-opc.h: Rebuild.
1895
1896 2000-02-23  Linas Vepstas <linas@linas.org>
1897
1898         * i370-dis.c, i370-opc.c: New.
1899
1900         * disassemble.c (ARCH_i370): Define.
1901         (disassembler): Handle it.
1902
1903         * Makefile.am: Add support for Linux/IBM 370.
1904         * configure.in: Likewise.
1905
1906         * Makefile.in: Regenerate.
1907         * configure: Likewise.
1908
1909 2000-02-22  Chandra Chavva   <cchavva@redhat.com>
1910
1911         * d30v-opc.c (d30v_opcode_tab) : Added FLAG_NOT_WITH_ADDSUBppp to
1912         ST2H, STB, STH, STHH, STW and ST2H opcodes to prohibit parallel
1913         procedure.
1914
1915 2000-02-22  Andrew Haley  <aph@redhat.com>
1916
1917         * mips-dis.c (_print_insn_mips): New arg for OPCODE_IS_MEMBER:
1918         force gp32 to zero.
1919         * mips-opc.c (G6): New define.
1920         (mips_builtin_op): Add "move" definition for -gp32.
1921
1922 2000-02-22  Ian Lance Taylor  <ian@zembu.com>
1923
1924         From Grant Erickson <gerickso@Brocade.COM>:
1925         * ppc-opc.c: Correct dcread--it takes 3 arguments, not 2.
1926
1927 2000-02-21  Alan Modra  <alan@spri.levels.unisa.edu.au>
1928
1929         * dis-buf.c (buffer_read_memory): Change `length' param and all int
1930         vars to unsigned.
1931
1932 2000-02-17 J"orn Rennecke <amylaar@redhat.co.uk>
1933
1934         * sh-dis.c (print_movxy, print_insn_ddt, print_dsp_reg): New functions.
1935         (print_insn_ppi): Likewise.
1936         (print_insn_shx): Use info->mach to select appropriate insn set.
1937         Add support for sh-dsp.  Remove FD_REG_N support.
1938         * sh-opc.h (sh_nibble_type): Add new values for sh-dsp support.
1939         (sh_arg_type): Likewise.  Remove FD_REG_N.
1940         (sh_dsp_reg_nums): New enum.
1941         (arch_sh1, arch_sh2, arch_sh3, arch_sh3e, arch_sh4): New macros.
1942         (arch_sh_dsp, arch_sh3_dsp, arch_sh1_up, arch_sh2_up): Likewise.
1943         (arch_sh3_up, arch_sh3e_up, arch_sh4_up, arch_sh_dsp_up): Likewise.
1944         (arch_sh3_dsp_up): Likewise.
1945         (sh_opcode_info): New field: arch.
1946         (sh_table): Split up insn with FD_REG_N into ones with F_REG_N and
1947         D_REG_N.  Fill in arch field.  Add sh-dsp insns.
1948
1949 2000-02-14  Fernando Nasser  <fnasser@totem.to.redhat.com>
1950
1951         * arm-dis.c: Change flavor name from atpcs-special to
1952         special-atpcs to prevent name conflict in gdb.
1953         (get_arm_regname_num_options, set_arm_regname_option,
1954         get_arm_regnames): New functions.  API to access the several
1955         flavor of register names.  Note: Used by gdb.
1956         (print_insn_thumb): Use the register name entry from the currently
1957         selected flavor for LR and PC.
1958
1959 2000-02-10  Nick Clifton  <nickc@redhat.com>
1960
1961         * mcore-opc.h (enum mcore_opclass): Add MULSH and OPSR
1962         classes.
1963         (mcore_table): Add "idly4", "psrclr", "psrset", "mulsh" and
1964         "mulsh.h" instructions.
1965         * mcore-dis.c (imsk array): Add masks for MULSH and OPSR
1966         classes.
1967         (print_insn_mcore): Add support for little endian targets.
1968         Add support for MULSH and OPSR classes.
1969
1970 2000-02-07  Nick Clifton  <nickc@redhat.com>
1971
1972         * arm-dis.c (parse_arm_diassembler_option): Rename again.
1973         Previous delat did not take.
1974
1975 2000-02-03  Timothy Wall  <twall@redhat.com>
1976
1977         * dis-buf.c (buffer_read_memory):  Use octets_per_byte field
1978         to adjust target address bounds checking and calculate the
1979         appropriate octet offset into data.
1980
1981 2000-01-27  Nick Clifton  <nickc@redhat.com>
1982
1983         * arm-dis.c: (parse_disassembler_option): Rename to
1984         parse_arm_disassembler_option and allow to be exported.
1985
1986         * disassemble.c (disassembler_usage): New function: Print out any
1987         target specific disassembler options.
1988         Call arm_disassembler_options() if the ARM architecture is being
1989         supported.
1990
1991         * arm-dis.c (NUM_ELEM): Define this macro if not already
1992         defined.
1993         (arm_regname): New struct type for ARM register names.
1994         (arm_toggle_regnames): Delete.
1995         (parse_disassembler_option): Use register name structure.
1996         (print_insn): New function: Combines duplicate code found in
1997         print_insn_big_arm and print_insn_little_arm.
1998         (print_insn_big_arm): Call print_insn.
1999         (print_insn_little_arm): Call print_insn.
2000         (print_arm_disassembler_options): Display list of supported,
2001         ARM specific disassembler options.
2002
2003 2000-01-27  Thomas de Lellis  <tdel@windriver.com>
2004
2005         * arm-dis.c (printf_insn_big_arm): Treat ELF symbols with the
2006         ARM_STT_16BIT flag as Thumb code symbols.
2007
2008         * arm-dis.c (printf_insn_little_arm): Ditto.
2009
2010 2000-01-25  Thomas de Lellis  <tdel@windriver.com>
2011
2012         * arm-dis.c (printf_insn_thumb): Prevent double dumping
2013         of raw thumb instructions.
2014
2015 2000-01-20  Nick Clifton  <nickc@redhat.com>
2016
2017         * mcore-opc.h (mcore_table): Add "add" as an alias for "addu".
2018
2019 2000-01-03  Nick Clifton  <nickc@cygnus.com>
2020
2021         * arm-dis.c (streq): New macro.
2022         (strneq): New macro.
2023         (force_thumb): ew local variable.
2024         (parse_disassembler_option): New function: Parse a single, ARM
2025         specific disassembler command line switch.
2026         (parse_disassembler_option): Call parse_disassembler_option to
2027         parse individual command line switches.
2028         (print_insn_big_arm): Check force_thumb.
2029         (print_insn_little_arm): Check force_thumb.
2030
2031 For older changes see ChangeLog-9899
2032 \f
2033 Local Variables:
2034 mode: change-log
2035 left-margin: 8
2036 fill-column: 74
2037 version-control: never
2038 End: