opcodes/ChangeLog

   1 Sun Sep 19 10:41:27 1999  Jeffrey A Law  (law@cygnus.com)
   2
   3         * hppa-dis.c: (print_insn_hppa): Correct 'cJ', 'cc'.
   4
   5         * hppa-dis.c (extract_22): New function.
   6
   7         * hppa-dis.c (print_insn_hppa): Handle 'J', 'K', and 'cc'.
   8
   9         * hppa-dis.c (print_insn_hppa): Handle 'fe' and 'cJ'.
  10
  11         * hppa-dis.c (print_insn_hppa): Handle '#', 'd', and 'cq'.
  12
  13         * hppa-dis.c (print_insn_hppa): Handle 'm', 'h', '='.
  14
  15         * hppa-dis.c (print_insn_hppa): Handle 'X' operand.
  16
  17         * hppa-dis.c (print_insn_hppa): Handle 'B' operand.
  18
  19         * hppa-dis.c (print_insn_hppa): Handle 'M' and 'L' operands.
  20
  21         * hppa-dis.c (print_insn_hppa): Handle 'l' operand.
  22
  23         * hppa-dis.c (print_insn_hppa): Handle 'g' operand.
  24
  25 Sat Sep 18 11:36:12 1999  Jeffrey A Law  (law@cygnus.com)
  26
  27         * hppa-dis.c (print_insn_hppa): Output a space after 'X' completer.
  28
  29         * hppa-dis.c: (print_insn_hppa): Do output a space before a 'v'
  30         operand.
  31
  32         * hppa-dis.c: (print_insn_hppa): Handle 'fX'.
  33
  34         * hppa-dis.c: (print_insn_hppa): Add missing break after
  35         FP register case.
  36
  37         * hppa-dis.c: Finish constifying various completers, register
  38         names, etc etc.
  39
  40 1999-09-14  Michael Meissner  <meissner@cygnus.com>
  41
  42         * configure.in (Canonicalization of target names): Remove adding
  43         ${CONFIG_SHELL} in front of $ac_config_sub, since autoconfig 2.14
  44         generates $ac_config_sub with a ${CONFIG_SHELL} already.
  45         * configure: Regenerate.
  46
  47 Tue Sep  7 13:50:32 1999  Jeffrey A Law  (law@cygnus.com)
  48
  49         * hppa-dis.c (print_insn_hppa): Escape '%' in output strings.
  50
  51         * hppa-dis.c (print_insn_hppa): Handle 'Z' argument.
  52
  53 1999-09-07  Nick Clifton  <nickc@cygnus.com>
  54
  55         * sh-opc.h: Add mulu.w and muls.w patterns.  These are the correct
  56         names for the mulu and muls patterns.
  57
  58 1999-09-04  Steve Chamberlain  <sac@pobox.com>
  59
  60         * pj-opc.c: New file.
  61         * pj-dis.c: New file.
  62         * disassemble.c (disassembler): Handle bfd_arch_pj.
  63         * configure.in: Handle bfd_pj_arch.
  64         * Makefile.am: Rebuild dependencies.
  65         (CFILES): Add pj-dis.c and pj-opc.c.
  66         (ALL_MACHINES): Add pj-dis.lo and pj-opc.lo.
  67         * configure, Makefile.in: Rebuild.
  68
  69 1999-09-04  H.J. Lu  <hjl@gnu.org>
  70
  71         * i386-dis.c (print_insn_i386): Set bytes_per_line to 7.
  72
  73 Mon Aug 30 18:56:14 1999  Richard Henderson  <rth@cygnus.com>
  74
  75         * alpha-opc.c (fetch, fetch_m, ecb, wh64): RA must be R31.
  76
  77 1999-08-04  Doug Evans  <devans@casey.cygnus.com>
  78
  79         * fr30-asm.c,fr30-desc.h,fr30-dis.c,fr30-ibld.c,fr30-opc.c: Rebuild.
  80         * m32r-asm.c,m32r-desc.h,m32r-dis.c,m32r-ibld.c,m32r-opc.c: Rebuild.
  81         * m32r-opinst.c: Rebuild.
  82
  83 Sat Aug 28 00:27:24 1999  Jerry Quinn <jquinn@nortelnetworks.com>
  84
  85         * hppa-dis.c (print_insn_hppa): Replace 'f' by 'v'.  Prefix float
  86         register args by 'f'.
  87
  88         * hppa-dis.c (print_insn_hppa): Add args q, %, !, and |.
  89
  90         * hppa-dis.c (MASK_10, read_write_names, add_compl_names,
  91         extract_10U_store):  New.
  92         (print_insn_hppa):  Add new completers.
  93
  94         * hppa-dis.c (signed_unsigned_names,mix_half_names,
  95         saturation_names):  New.
  96         (print_insn_hppa): Add completer codes 'a', 'ch', 'cH', 'cS', and 'c*'.
  97
  98         * hppa-dis.c (print_insn_hppa): Place completers behind prefix 'c'.
  99
 100         * hppa-dis.c (print_insn_hppa): Add cases for '.', '~'. '$'. and '!'
 101
 102         * hppa-dis.c (print_insn_hppa):  Look at next arg instead of bits
 103         to decide to print a space.
 104
 105 1999-08-21  Alan Modra  <alan@spri.levels.unisa.edu.au>
 106
 107         * i386-dis.c: Add AMD athlon instruction support.
 108
 109 1999-08-10  Ian Lance Taylor  <ian@zembu.com>
 110
 111         From Wally Iimura <iimura@microunity.com>:
 112         * dis-buf.c (buffer_read_memory): Rewrite expression to avoid
 113         overflow at end of address space.
 114         (generic_print_address): Use sprintf_vma.
 115
 116 1999-08-08  Ian Lance Taylor  <ian@zembu.com>
 117
 118         * Makefile.am: Rename .dep* files to DEP*.  Change DEP variable to
 119         MKDEP.  Rebuild dependencies.
 120         * Makefile.in: Rebuild.
 121
 122 Fri Aug  6 09:46:35 1999  Jerry Quinn <jquinn@nortelnetworks.com>
 123
 124         * hppa-dis.c (compare_cond_64_names, cmpib_cond_64_names,
 125         add_cond_64_names, wide_add_cond_names, logical_cond_64_names,
 126         unit_cond_64_names, shift_cond_64_names, bb_cond_64_names): New.
 127         (print_insn_hppa): Add 64 bit condition completers.
 128
 129 Thu Aug  5 16:59:58 1999  Jerry Quinn <jquinn@nortelnetworks.com>
 130
 131         * hppa-dis.c (print_insn_hppa): Change condition args to use
 132         '?' prefix.
 133
 134 Wed Jul 28 04:33:58 1999  Jerry Quinn <jquinn@nortelnetworks.com>
 135
 136         * hppa-dis.c (print_insn_hppa): Remove unnecessary test in 'E'
 137         code.
 138
 139 1999-07-21  Ian Lance Taylor  <ian@zembu.com>
 140
 141         From Mark Elbrecht:
 142         * configure.bat: Remove; obsolete.
 143
 144 1999-07-11  Ian Lance Taylor  <ian@zembu.com>
 145
 146         * dis-buf.c: Add ATTRIBUTE_UNUSED as appropriate.
 147         (generic_strcat_address): Add cast to avoid warning.
 148         * i386-dis.c: Initialize all structure fields to avoid warnings.
 149         Add ATTRIBUTE_UNUSED as appropriate.
 150
 151 1999-07-08  Jakub Jelinek  <jj@ultra.linux.cz>
 152
 153         * sparc-dis.c (print_insn_sparc): Differentiate between
 154         addition and oring when guessing symbol for comment.
 155
 156 1999-07-05  Nick Clifton  <nickc@cygnus.com>
 157
 158         * arm-dis.c (print_insn_arm): Display hex equivalent of rotated
 159         constant.
 160
 161 1999-06-23  Alan Modra  <alan@spri.levels.unisa.edu.au>
 162
 163         * i386-dis.c: Mention intel mode specials in macro char comment.
 164
 165 1999-06-21  Ian Lance Taylor  <ian@zembu.com>
 166
 167         * alpha-dis.c: Don't include <stdlib.h>.
 168         * arm-dis.c: Include "sysdep.h".
 169         * tic30-dis.c: Don't include <stdlib.h> or <string.h>.  Include
 170         "sysdep.h".
 171         * Makefile.am: Rebuild dependencies.
 172         * Makefile.in: Rebuild.
 173
 174 1999-06-16  Nick Clifton  <nickc@cygnus.com>
 175
 176         * arm-dis.c (print_insn_arm): Add detection of IMB and IMBRange
 177         SWIs.
 178
 179 1999-06-14  Nick Clifton  <nickc@cygnus.com> & Drew Mosley <dmoseley@cygnus.com>
 180
 181         * arm-dis.c (arm_regnames): Turn into a pointer to a register
 182         name set.
 183         (arm_regnames_standard): New variable: Array of ARM register
 184         names according to ARM instruction set nomenclature.
 185         (arm_regnames_apcs): New variable: Array of ARM register names
 186         according to ARM Procedure Call Standard.
 187         (arm_regnames_raw): New variable: Array of ARM register names
 188         using just 'r' and the register number.
 189         (arm_toggle_regnames): New function: Toggle the chosen register set
 190         naming scheme.
 191         (parse_disassembler_options): New function: Parse any target
 192         disassembler command line options.
 193         (print_insn_big_arm): Call parse_disassembler_options if any
 194         are defined.
 195         (print_insn_little_arm): Call parse_disassembler_options if any
 196         are defined.
 197
 198 1999-06-13  Ian Lance Taylor  <ian@zembu.com>
 199
 200         * i386-dis.c (FWAIT_OPCODE): Define.
 201         (used_prefixes): New static variable.
 202         (fetch_data): Don't print an error message if we have already
 203         fetched some bytes successfully.
 204         (ckprefix): Clear used_prefixes.  Use FWAIT_OPCODE, not 0x9b.
 205         (prefix_name): New static function.
 206         (print_insn_i386): If setjmp fails, indicating a data error, but
 207         we have managed to fetch some bytes, print the first one as a
 208         prefix or a .byte pseudo-op.  If fwait is followed by a non
 209         floating point instruction, print the first prefix.  Set
 210         used_prefixes when prefixes are used.  If any prefixes were not
 211         used after disassembling the instruction, print the first prefix
 212         instead of printing the instruction.
 213         (putop): Set used_prefixes when prefixes are used.
 214         (append_seg, OP_E, OP_G, OP_REG, OP_I, OP_sI, OP_J): Likewise.
 215         (OP_DIR, OP_SIMD_Suffix): Likewise.
 216
 217 1999-06-07  Jakub Jelinek  <jj@ultra.linux.cz>
 218
 219         * sparc-opc.c: Fix up set, setsw, setuw operand kinds.
 220         Support signx %reg, clruw %reg.
 221
 222 1999-06-07  Jakub Jelinek  <jj@ultra.linux.cz>
 223
 224         * sparc-opc.c: Add aliases Solaris as supports.
 225
 226 Mon Jun  7 12:04:52 1999  Andreas Schwab  <schwab@issan.cs.uni-dortmund.de>
 227
 228         * Makefile.am (CFILES): Add arc-{dis,opc}.c and v850-{dis,opc}.c.
 229         * Makefile.in: Regenerated.
 230
 231 1999-06-03  Philip Blundell  <philb@gnu.org>
 232
 233         * arm-dis.c (print_insn_arm): Make LDRH/LDRB consistent with LDR
 234         when target is PC-relative.
 235
 236 1999-05-28  Linus Nordberg  <linus.nordberg@canit.se>
 237
 238         * m68k-opc.c: Rename MACL/MSACL to MAC/MSAC.  Add MACM/MSACM.  Add
 239         MOVE MACSR,CCR.
 240
 241         * m68k-dis.c (fetch_arg): Add places `n', `o'.
 242
 243         * m68k-opc.c: Add MSAC, MACL, MOVE to/from ACC, MACSR, MASK.
 244         Add mcf5206e to appropriate instructions.
 245         Add alias for MAC, MSAC.
 246
 247         * m68k-dis.c (print_insn_arg): Add formats `E', `G', `H' and place
 248         `N'.
 249
 250         * m68k-opc.c (m68k_opcodes): Add divsw, divsl, divuw, divul, macl,
 251         macw, remsl, remul for mcf5307.  Change mcf5200 --> mcf.
 252
 253         * m68k-dis.c: Add format `u' and places `h', `m', `M'.
 254
 255 1999-05-18  Alan Modra  <alan@spri.levels.unisa.edu.au>
 256
 257         * i386-dis.c (Ed): Define.
 258         (dis386_twobyte_att, dis386_twobyte_intel): Use Ed for movd.
 259         (Rw): Remove.
 260         (OP_rm): Rename to OP_Rd.
 261         (ONE): Remove.
 262         (OP_ONE): Remove.
 263         (putop): Add const to template and p.
 264         (print_insn_x86): Delete.
 265         (print_insn_i386): Merge old function print_insn_x86.  Add const
 266         to dp.
 267         (struct dis386): Add const to name.
 268         (dis386_att, dis386_intel): Add const.
 269         (dis386_twobyte_att, dis386_twobyte_intel): Add const.
 270         (names32, names16, names8, names_seg, index16): Add const.
 271         (grps, prefix_user_table, float_reg): Add const.
 272         (float_mem_att, float_mem_intel): Add const.
 273         (oappend): Add const to s.
 274         (OP_REG): Add const to s.
 275         (ptr_reg): Add const to s.
 276         (dofloat): Add const to dp.
 277         (OP_C): Don't skip modrm, it's now done in OP_Rd.
 278         (OP_D): Ditto.
 279         (OP_T): Ditto.
 280         (OP_Rd): Check for valid mod.  Call Op_E to print.
 281         (OP_E): Handle d_mode arg.  Check for bad sfence,lea,lds etc.
 282         (OP_MS): Check for valid mod.  Call Op_EM to print.
 283         (OP_3DNowSuffix): Set obufp and use oappend rather than
 284         strcat.  Call BadOp() for errors.
 285         (OP_SIMD_Suffix): Likewise.
 286         (BadOp): New function.
 287
 288 1999-05-12  Alan Modra  <alan@spri.levels.unisa.edu.au>
 289
 290         * i386-dis.c (dis386_intel): Remove macro chars, except for
 291         jEcxz.  Change cWtR and cRtd to cW and cR.
 292         (dis386_twobyte_intel): Remove macro chars here too.
 293         (putop): Handle R and W macros for intel mode.
 294
 295         * i386-dis.c (SIMD_Fixup): New function.
 296         (dis386_twobyte_att): Use it on movlps and movhps, and change
 297         Ev to EX on these insns.  Change movmskps Ev, XM to Gv, EX.
 298         (dis386_twobyte_intel): Same here.
 299
 300         * i386-dis.c (Av): Remove.
 301         (Ap): remove lptr.
 302         (lptr): Remove.
 303         (OPSIMD): Define.
 304         (OP_SIMD_Suffix): New function.
 305         (OP_DIR): Remove dead code.
 306         (eAX_reg..eDI_reg): Renumber.
 307         (onebyte_has_modrm): Table numbering comments.
 308         (INTERNAL_DISASSEMBLER_ERROR): Move to before print_insn_x86.
 309         (print_insn_x86): Move all prefix oappends to after uses_f3_prefix
 310         checks.  Print error on invalid dp->bytemode2.  Remove simd_cmp,
 311         and handle SIMD cmp insns in OP_SIMD_Suffix.
 312         (info->bytes_per_line): Bump from 5 to 6.
 313         (OP_None): Remove.
 314         (OP_E): Use INTERNAL_DISASSEMBLER_ERROR.  Handle sfence.
 315         (OP_3DNowSuffix): Ensure mnemonic index unsigned.
 316
 317         PIII SIMD support from Doug Ledford <dledford@redhat.com>
 318         * i386-dis.c (XM, EX, None): Define.
 319         (OP_XMM, OP_EX, OP_None): New functions.
 320         (USE_GROUPS, USE_PREFIX_USER_TABLE): Define.
 321         (GRP14): Rename to GRPAMD.
 322         (GRP*): Add USE_GROUPS flag.
 323         (PREGRP*): Define.
 324         (dis386_twobyte_att, dis386_twobyte_intel): Add SIMD insns.
 325         (twobyte_has_modrm): Add SIMD entries.
 326         (twobyte_uses_f3_prefix, simd_cmp_op, prefix_user_table): New.
 327         (grps): Add SIMD insns.
 328         (print_insn_x86): New vars uses_f3_prefix and simd_cmp.  Don't
 329         oappend repz if uses_f3_prefix.  Add code to handle new groups for
 330         SIMD insns.
 331
 332         From Maciej W. Rozycki <macro@ds2.pg.gda.pl>
 333         * i386-dis.c (dis386_att, dis386_intel): Change 0xE8 call insn
 334         operand from Av to Jv.
 335
 336 1999-05-07  Nick Clifton  <nickc@cygnus.com>
 337
 338         * mcore-dis.c (print_insn_mcore): Use .short to display
 339         unidentified instructions, not .word.
 340
 341 1999-04-26  Tom Tromey  <tromey@cygnus.com>
 342
 343         * aclocal.m4, configure: Updated for new version of libtool.
 344
 345 1999-04-14  Doug Evans  <devans@casey.cygnus.com>
 346
 347         * fr30-desc.c,fr30-desc.h,fr30-dis.c,fr30-ibld.c,fr30-opc.c: Rebuild.
 348         * m32r-desc.c,m32r-desc.h,m32r-dis.c,m32r-ibld.c,m32r-opc.c: Rebuild.
 349
 350 Mon Apr 12 23:46:17 1999  Jeffrey A Law  (law@cygnus.com)
 351
 352         * hppa-dis.c (print_insn_hppa, case '3'): New case for PA2.0
 353         instructions.
 354
 355 1999-04-10  Doug Evans  <devans@casey.cygnus.com>
 356
 357         * fr30-desc.c,fr30-desc.h,fr30-ibld.c: Rebuild.
 358         * m32r-desc.c,m32r-desc.h,m32r-opinst.c: Rebuild.
 359
 360 1999-04-06  Ian Lance Taylor  <ian@zembu.com>
 361
 362         * opintl.h (LC_MESSAGES): Never define.
 363
 364 1999-04-04  Ian Lance Taylor  <ian@zembu.com>
 365
 366         * i386-dis.c (intel_syntax, open_char, close_char): Make static.
 367         (separator_char, scale_char): Likewise.
 368         (print_insn_x86): Likewise.
 369         (print_insn_i386): Likewise.  Add declaration.
 370
 371 1999-03-26  Doug Evans  <devans@casey.cygnus.com>
 372
 373         * fr30-dis.c: Rebuild.
 374         * m32r-dis.c: Rebuild.
 375
 376 1999-03-23  Ian Lance Taylor  <ian@zembu.com>
 377
 378         * m68k-opc.c: Change compare instructions to use "@s" rather than
 379         ";s" when used with an immediate operand.
 380
 381 1999-03-22  Doug Evans  <devans@casey.cygnus.com>
 382
 383         * cgen-opc.c (cgen_set_cpu): Delete.
 384         (cgen_lookup_insn): max_insn_size renamed to max_insn_bitsize.
 385         * fr30-desc.c,fr30-desc.h,fr30-dis.c,fr30-ibld.c,fr30-opc.c,fr30-opc.h:
 386         Rebuild.
 387         * m32r-desc.c,m32r-desc.h,m32r-dis.c,m32r-ibld.c,m32r-opc.c,m32r-opc.h:
 388         Rebuild.
 389         * po/opcodes.pot: Rebuild.
 390
 391 1999-03-16  Martin Hunt  <hunt@cygnus.com>
 392
 393         * d30v-opc.c (mvtsys): Remove FLAG_LKR.
 394
 395 1999-03-11  Doug Evans  <devans@casey.cygnus.com>
 396
 397         * cgen-opc.c (cgen_set_cpu): New arg `isa'.  All callers updated.
 398         (cgen_operand_lookup_by_name,cgen_operand_lookup_by_num): New fns.
 399         (cgen_get_insn_operands): Rewrite test for hardcoded/operand index.
 400         * fr30-asm.c,fr30-desc.c,fr30-desc.h,fr30-dis.c,fr30-ibld.c: Rebuild.
 401         * m32r-asm.c,m32r-desc.c,m32r-desc.h,m32r-dis.c,m32r-ibld.c: Rebuild.
 402         * m32r-opinst.c: Rebuild.
 403
 404 1999-02-25  Doug Evans  <devans@casey.cygnus.com>
 405
 406         * cgen-opc.c (cgen_hw_lookup_by_name): Rewrite.
 407         (cgen_hw_lookup_by_num): Rewrite.
 408         * fr30-desc.c,fr30-desc.h,fr30-dis.c,fr30-ibld.c,fr30-opc.c: Rebuild.
 409         * m32r-desc.c,m32r-desc.h,m32r-dis.c,m32r-ibld.c,m32r-opc.c: Rebuild.
 410         * m32r-opinst.c: Rebuild.
 411
 412 Sat Feb 13 14:06:19 1999  Richard Henderson  <rth@cygnus.com>
 413
 414         * alpha-opc.c: Add sqrt+flags patterns.  Add EV6 PALcode insns.
 415         (insert_jhint): Fix insertion mask.
 416         * alpha-dis.c (print_insn_alpha): Disassemble EV6 PALcode insns.
 417
 418 1999-02-10  Doug Evans  <devans@casey.cygnus.com>
 419
 420         * Makefile.in: Rebuild.
 421
 422 1999-02-09  Doug Evans  <devans@casey.cygnus.com>
 423
 424         * i960c-asm.c,i960c-dis.c,i960c-opc.c,i960c-opc.h: Delete.
 425         * i960-dis.c (print_insn_i960): Rename from print_insn_i960_orig.
 426         * Makefile.am: Remove references to them.
 427         (HFILES): Add fr30-desc.h,m32r-desc.h.
 428         (CFILES): Add fr30-desc.c,fr30-ibld.c,m32r-desc.c,m32r-ibld.c,
 429         m32r-opinst.c.
 430         (ALL_MACHINES): Update.
 431         * configure.in: Redo handling of cgen_files.
 432         (bfd_i960_arch): Delete i960c-*.lo files.
 433         * configure: Regenerate.
 434         * cgen-asm.c (*): CGEN_OPCODE_DESC renamed to CGEN_CPU_DESC.
 435         (hash_insn_array): Rewrite.
 436         * cgen-dis.c (*): CGEN_OPCODE_DESC renamed to CGEN_CPU_DESC.
 437         (hash_insn_array): Rewrite.
 438         * cgen-opc.c (*): CGEN_OPCODE_DESC renamed to CGEN_CPU_DESC.
 439         (cgen_lookup_insn,cgen_get_insn_operands): Define here.
 440         (cgen_lookup_get_insn_operands): Ditto.
 441         * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerate.
 442         * m32r-asm.c,m32r-dis.c,m32r-opc.c,m32r-opc.h: Regenerate.
 443         * po/POTFILES.in: Rebuild.
 444         * po/opcodes.pot: Rebuild.
 445
 446 Fri Feb  5 00:04:24 1999  Ian Lance Taylor  <ian@cygnus.com>
 447
 448         * Makefile.am: Rebuild dependencies.
 449         (HFILES): Add fr30-opc.h.
 450         (CFILES): Add fr30-asm.c, fr30-dis.c, fr30-opc.c.
 451         * Makefile.in: Rebuild.
 452
 453         * configure.in: Change AC_PREREQ to 2.13.  Remove AM_CYGWIN32.
 454         Change AM_EXEEXT to AC_EXEEXT and AM_PROG_INSTALL to
 455         AC_PROG_INSTALL.
 456         * acconfig.h: Remove.
 457         * configure: Rebuild with current autoconf/automake.
 458         * aclocal.m4: Likewise.
 459         * config.in: Likewise.
 460         * Makefile.in: Likewise.
 461
 462 Thu Feb  4 13:48:52 1999  Ian Lance Taylor  <ian@cygnus.com>
 463
 464         * m68k-opc.c: Correct move (not movew) to status word on 5200.
 465
 466 Mon Feb  1 20:54:36 1999  Catherine Moore  <clm@cygnus.com>
 467
 468         * disassemble.c (disassembler):  Handle bfd_mach_i386_i386_intel_syntax.
 469         * i386-dis.c (x_mode):  Define.
 470         (dis386):  Remove.
 471         (dis386_att):  New.
 472         (dis386_intel):  New.
 473         (dis386_twobyte):  Remove.
 474         (dis386_twobyte_att):  New.
 475         (dis386_twobyte_intel):  New.
 476         (print_insn_x86):  Use new arrays.
 477         (float_mem):  Remove.
 478         (float_mem_intel):  New.
 479         (float_mem_att):  New.
 480         (dofloat):  Use new float_mem arrays.
 481         (print_insn_i386_att):  New.
 482         (print_insn_i386_intel):  New.
 483         (print_insn_i386):  Handle bfd_mach_i386_i386_intel_syntax.
 484         (putop):  Handle intel syntax.
 485         (OP_indirE):  Handle intel syntax.
 486         (OP_E):  Handle intel syntax.
 487         (OP_I):  Handle intel syntax.
 488         (OP_sI):  Handle intel syntax.
 489         (OP_OFF):  Handle intel syntax.
 490
 491
 492
 493 1999-01-27  Doug Evans  <devans@casey.cygnus.com>
 494
 495         * fr30-opc.h,fr30-opc.c: Rebuild.
 496         * i960c-opc.h,i960c-opc.c: Rebuild.
 497         * m32r-opc.c: Rebuild.
 498
 499 Tue Jan 19 18:01:54 1999  David Taylor  <taylor@texas.cygnus.com>
 500
 501         * hppa-dis.c: revert HP merge changes until HP gives us
 502         an updated file.
 503
 504 1999-01-19  Nick Clifton  <nickc@cygnus.com>
 505
 506         * arm-dis.c (print_insn_arm): Display ARM syntax for PC relative
 507         offsets as well as symbloic address.
 508
 509 Tue Jan 19 10:51:01 1999  David Taylor  <taylor@texas.cygnus.com>
 510
 511         * hppa-dis.c: fix comments and some indentation.
 512
 513 1999-01-12  Doug Evans  <devans@casey.cygnus.com>
 514
 515         * fr30-opc.c,i960c-opc.c: Regenerate.
 516
 517 1999-01-11  Doug Evans  <devans@casey.cygnus.com>
 518
 519         * fr30-opc.c: Regenerate.
 520
 521 1999-01-06  Doug Evans  <devans@casey.cygnus.com>
 522
 523         * m32r-dis.c: Regenerate.
 524
 525 1999-01-05  Doug Evans  <devans@casey.cygnus.com>
 526
 527         * fr30-asm.c,fr30-dis.c,fr30-opc.h,fr30-opc.c: Regenerate.
 528         * i960c-asm.c,i960c-dis.c,i960c-opc.h,i960c-opc.c: Regenerate.
 529         * m32r-asm.c,m32r-dis.c,m32r-opc.h,m32r-opc.c: Regenerate.
 530
 531 1999-01-04  Jason Molenda  (jsm@bugshack.cygnus.com)
 532
 533         * configure.in: Require autoconf 2.12.1 or higher.
 534
 535 1998-12-30  Gavin Romig-Koch  <gavin@cygnus.com>
 536
 537         * mips16-opc.c: Mark branch insns with MIPS16_INSN_BRANCH.
 538
 539 Wed Dec 16 16:17:49 1998  Dave Brolley  <brolley@cygnus.com>
 540
 541         * fr30-opc.c: Regenerated.
 542
 543 1998-12-16  Gavin Romig-Koch  <gavin@cygnus.com>
 544
 545         * mips-dis.c (set_mips_isa_type): Handle bfd_mach_mips4111.
 546
 547 1998-12-15  Dave Brolley  <brolley@cygnus.com>
 548
 549         * fr30-opc.c,fr30-opc.h: Regenerated.
 550
 551 1998-12-14  Dave Brolley  <brolley@cygnus.com>
 552
 553         * fr30-opc.c,fr30-opc.h: Regenerated.
 554
 555 Thu Dec 10 18:39:46 1998  Dave Brolley  <brolley@cygnus.com>
 556
 557         * fr30-opc.c,fr30-opc.h: Regenerated.
 558
 559 Thu Dec 10 12:49:24 1998  Doug Evans  <devans@canuck.cygnus.com>
 560
 561         * m32r-opc.c: Regenerate.
 562
 563 Tue Dec  8 13:56:18 1998  David Taylor  <taylor@texas.cygnus.com>
 564
 565         * dis-buf.c (generic_strcat_address): reformat to GNU coding
 566         conventions.  change sprintf call to an sprintf_vma call.
 567
 568 Tue Dec  8 13:12:44 1998  Dave Brolley  <brolley@cygnus.com>
 569
 570         * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
 571
 572 Tue Dec  8 10:50:46 1998  David Taylor  <taylor@texas.cygnus.com>
 573
 574         The following changes were made by
 575         Elena Zannoni <ezannoni@kwikemart.cygnus.com>,
 576         David Taylor <taylor@texas.cygnus.com>, and
 577         Edith Epstein <eepstein@sophia.cygnus.com> as part of a project to
 578         merge in changes by HP; HP did not create ChangeLog entries.
 579
 580         * dis-buf.c (generic_strcat_address): new function.
 581
 582         * hppa-dis.c: Changes to improve hppa disassembly.
 583           Changed formatting in : reg_names, fp_reg_names,control_reg,
 584           New variables : sign_extension_names, deposit_names, conversion_names
 585             float_test_names, compare_cond_names_double, add_cond_names_double,
 586             logical_cond_names_double, unit_cond_names_double,
 587             branch_push_pop_names, saturation_names, shift_names, mix_names,
 588           New Macros :   GET_COMPL_O, GET_PUSH_POP,MERGED_REG
 589           Move some definitions to libhppa.h: GET_FIELD, GET_BIT
 590           (fput_const): renamed as fput_hex_const
 591           (print_insn_hppa):
 592            - use the macros fputs_filtered and
 593              fput_decimal_const whenever possible; calls to sign_extend require
 594              2 params -- add a missing second param of 0.
 595            - Some new code ifdefed for LOCAL_ONLY, all related to figuring out
 596              architecture version number of current machine. HP folks are
 597              trying to handle situation where the target program was compiled
 598              for PA 1.x (32-bit), but is running on a PA 2.0 machine and
 599              visa versa.
 600            - added new cases : 'g', 'B', 'm'
 601            - added cases specifically for PA 2.0
 602            - changed the following cases : '"', 'n', 'N', 'p', 'Z',
 603            - calls to fput_const become calls to fput_hex_const
 604
 605 1998-12-07  James E Wilson  <wilson@wilson-pc.cygnus.com>
 606
 607         * Makefile.am (CFILES): Add i960c-asm, i960c-dis.c, i960c-opc.c.
 608         (ALL_MACHINES): Add i960c-asm.lo, i960c-dis.lo, i960-opc.lo.
 609         (i960-asm.lo, i960c-dis.lo, i960c-opc.lo): New Makefile rules.
 610         * Makefile.in: Rebuilt.
 611         * configure.in (bfd_i960_arch): Add i960c-opc.lo, i960-asm.o,
 612         i960-dis.c to ta.
 613         * i960-dis.c (print_insn_i960): Rename to print_insn_i960_orig.
 614         * i960c-asm.c, i960c-dis.c, i960c-opc.c, i960c-opc.h: New files.
 615
 616 Mon Dec  7 14:33:44 1998  Dave Brolley  <brolley@cygnus.com>
 617
 618         * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
 619
 620 Sun Dec  6 14:06:48 1998  Ian Lance Taylor  <ian@cygnus.com>
 621
 622         * mips-opc.c (mips_builtin_opcodes): Add dmfc2 and dmtc2.
 623
 624         * ppc-opc.c (powerpc_opcodes): Add PowerPC403 GC[X] instructions.
 625         From Saitoh Masanobu <msaitoh@spa.is.uec.ac.jp>.
 626
 627 Fri Dec  4 17:45:51 1998  Doug Evans  <devans@canuck.cygnus.com>
 628
 629         * fr30-opc.c: Regenerate.
 630
 631 Fri Dec  4 17:08:08 1998  Dave Brolley  <brolley@cygnus.com>
 632
 633         * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
 634
 635 Thu Dec  3 14:26:20 1998  Dave Brolley  <brolley@cygnus.com>
 636
 637         * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
 638
 639 Thu Dec  3 00:09:17 1998  Doug Evans  <devans@canuck.cygnus.com>
 640
 641         * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerate.
 642
 643 1998-11-30  Doug Evans  <devans@casey.cygnus.com>
 644
 645         * cgen-dis.c (hash_insn_array): CGEN_INSN_VALUE ->
 646         CGEN_INSN_BASE_VALUE.
 647         * m32r-opc.c,m32r-opc.h,m32r-asm.c,m32r-dis.c: Regenerate.
 648         * fr30-opc.c,fr30-opc.h,fr30-asm.c,fr30-dis.c: Regenerate.
 649
 650 Thu Nov 26 11:26:32 1998  Dave Brolley  <brolley@cygnus.com>
 651
 652         * fr30-asm.c,fr30-dis.c,fr30-opc.c: Regenerated.
 653
 654 Tue Nov 24 11:20:54 1998  Dave Brolley  <brolley@cygnus.com>
 655
 656         * fr30-asm.c,fr30-dis.c: Regenerated.
 657
 658 Mon Nov 23 18:28:48 1998  Dave Brolley  <brolley@cygnus.com>
 659
 660         * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
 661
 662 1998-11-20  Doug Evans  <devans@tobor.to.cygnus.com>
 663
 664         * fr30-opc.c: Regenerated.
 665
 666 Thu Nov 19 16:02:46 1998  Dave Brolley  <brolley@cygnus.com>
 667
 668         * fr30-opc.c: Regenerated.
 669         * fr30-opc.h: Regenerated.
 670         * fr30-dis.c: Regenerated.
 671         * fr30-asm.c: Regenerated.
 672
 673 Thu Nov 19 07:54:15 1998  Doug Evans  <devans@charmed.cygnus.com>
 674
 675         * mips-opc.c (sync.p,sync.l): Swap insn values.
 676
 677 1998-11-19  Doug Evans  <devans@tobor.to.cygnus.com>
 678
 679         * fr30-opc.c: Regenerate.
 680
 681 Wed Nov 18 21:36:37 1998  Dave Brolley  <brolley@cygnus.com>
 682
 683         * fr30-opc.c: Regenerated.
 684         * fr30-opc.h: Regenerated.
 685
 686 1998-11-18  Doug Evans  <devans@casey.cygnus.com>
 687
 688         * m32r-asm.c,m32r-dis.c,m32r-opc.c: Rebuild.
 689         * fr30-asm.c,fr30-dis.c,fr30-opc.c: Rebuild.
 690
 691 Wed Nov 18 11:30:04 1998  Dave Brolley  <brolley@cygnus.com>
 692
 693         * fr30-opc.c: Regenerated.
 694
 695 Mon Nov 16 19:21:48 1998  Dave Brolley  <brolley@cygnus.com>
 696
 697         * fr30-opc.c: Regenerated.
 698         * fr30-opc.h: Regenerated.
 699         * fr30-dis.c: Regenerated.
 700         * fr30-asm.c: Regenerated.
 701
 702 Thu Nov 12 19:24:18 1998  Dave Brolley  <brolley@cygnus.com>
 703
 704         * po/opcodes.pot: Regenerated.
 705         * fr30-opc.c: Regenerated.
 706         * fr30-opc.h: Regenerated.
 707         * fr30-dis.c: Regenerated.
 708         * fr30-asm.c: Regenerated.
 709
 710 Tue Nov 10 15:26:27 1998  Nick Clifton  <nickc@cygnus.com>
 711
 712         * disassemble.c (disassembler): Add support for FR30 target.
 713
 714 Tue Nov 10 11:00:04 1998  Doug Evans  <devans@canuck.cygnus.com>
 715
 716         * m32r-dis.c,m32r-opc.c,m32r-opc.h: Rebuild.
 717         * fr30-dis.c,fr30-opc.c,fr30-opc.h: Rebuild.
 718
 719 Mon Nov  9 18:22:55 1998  Dave Brolley  <brolley@cygnus.com>
 720
 721         * po/opcodes.pot: Regenerate.
 722         * po/POTFILES.in: Regenerate.
 723         * fr30-opc.c: Regenerate.
 724         * fr30-opc.h: Regenerate.
 725
 726 Fri Nov  6 17:21:38 1998  Doug Evans  <devans@canuck.cygnus.com>
 727
 728         * m32r-asm.c: Regenerate.
 729
 730 Wed Nov  4 18:46:47 1998  Dave Brolley  <brolley@cygnus.com>
 731
 732         * configure.in: Added case for bfd_fr30_arch.
 733         * Makefile.am (CFILES): Added fr30-asm.c, fr30-dis.c, fr30-opc.c.
 734         (ALL_MACHINES): Added fr30-asm.lo, fr30-dis.lo, fr30-opc.lo.
 735         (CLEANFILES): Added stamp-fr30.
 736         (FR30_DEPS): Added.
 737         * fr30-asm.c: New file.
 738         * fr30-dis.c: New file.
 739         * fr30-opc.c: New file.
 740         * fr30-opc.h: New file.
 741         * po/POTFILES.in: Regenerated
 742         * po/opcodes.pot: Regenerated
 743
 744 Mon Nov  2 15:05:33 1998  Geoffrey Noer  <noer@cygnus.com>
 745
 746         * configure.in: detect cygwin* instead of cygwin32*
 747         * configure: regenerate
 748
 749 Tue Oct 27 08:58:37 1998  Gavin Romig-Koch  <gavin@cygnus.com>
 750
 751         * mips-opc.c (IS_M): Added.
 752
 753 Mon Oct 19 13:03:19 1998  Doug Evans  <devans@seba.cygnus.com>
 754
 755         * m32r-opc.c,m32r-opc.h,m32r-asm.c,m32r-dis.c: Regenerate.
 756
 757 Fri Oct  9 14:01:56 1998  Doug Evans  <devans@seba.cygnus.com>
 758
 759         * m32r-opc.h,m32r-opc.c: Regenerate.
 760
 761 Sun Oct  4 21:01:44 1998  Alan Modra  <alan@spri.levels.unisa.edu.au>
 762
 763         * i386-dis.c (OP_3DNowSuffix): New static function.
 764         (OPSUF): Define.
 765         (GRP14): Define.
 766         (dis386_twobyte): Add GRP14, femms, and 3DNow entries.
 767         (twobyte_has_modrm): Set entries corresponding to GRP14, 3DNow.
 768         (insn_codep): New static variable.
 769         (print_insn_x86): Init insn_codep after prefixes.
 770         (grps): Add GRP14 entries for prefetch, prefetchw.
 771         (OP_REG): Reformat.
 772
 773         From Jeff B Epler <jepler@usgs.gov>
 774         * i386-dis.c (Suffix3DNow): New table.
 775
 776 Wed Sep 30 10:17:50 1998  Nick Clifton  <nickc@cygnus.com>
 777
 778         * d10v-opc.c: Treat TRAP as if it were a branch type instruction.
 779
 780 Mon Sep 28 14:35:43 1998  Martin M. Hunt  <hunt@cygnus.com>
 781
 782         * d10v-dis.c (print_operand): If num is nonzero, then
 783         add OPERAND_ACC1, not OPERAND_ACC0.
 784
 785 Thu Sep 24 09:20:03 1998  Nick Clifton  <nickc@cygnus.com>
 786
 787         * d30v-opc.c: Add FLAG_JSR attribute to DBT, REIT, RTD, and TRAP
 788         insns.
 789
 790 Tue Sep 22 17:55:14 1998  Nick Clifton  <nickc@cygnus.com>
 791
 792         * d30v-opc.c: Add use of EITHER_BUT_PREFER_MU execution unit
 793         class.
 794
 795 Tue Sep 15 15:14:45 1998  Doug Evans  <devans@canuck.cygnus.com>
 796
 797         * m32r-opc.h,m32r-opc.c: Add bbpc,bbpsw support.
 798
 799 1998-09-09  Michael Meissner  <meissner@cygnus.com>
 800
 801         * ppc-opc.c (powerpc_opcodes): Add support for PowerPC 750 move
 802         to/from SPRs.
 803
 804 Fri Sep  4 19:42:59 1998  Nick Clifton  <nickc@cygnus.com>
 805
 806         * arm-dis.c (print_insn_big_arm): Detect Thumb symbols in elf
 807         object files.
 808         (print_insn_little_arm): Detect Thumb symbols in elf object
 809         files.
 810
 811 Sat Aug 29 22:24:09 1998  Richard Henderson  <rth@cygnus.com>
 812
 813         * alpha-dis.c (print_insn_alpha): Use the machine type to
 814         decide which PALcode set to include.
 815
 816 Sun Aug 23 02:16:18 1998  Richard Henderson  <rth@cygnus.com>
 817
 818         * sparc-opc.c (FBRX): Fix typo in ",a,pn %fcc3" case.
 819
 820 Fri Aug 21 16:07:52 1998  Nick Clifton  <nickc@cygnus.com>
 821
 822         * d30v-opc.c (d30v_opcode_table): Add FLAG_MUL32 to MAC, MACS,
 823         MSUB and MSUBS instructions.
 824
 825 Thu Aug 13 16:23:04 1998  Ian Lance Taylor  <ian@cygnus.com>
 826
 827         * ppc-opc.c (powerpc_operands): Omit parens around additions in
 828         operand name macros.
 829
 830 Wed Aug 12 14:00:38 1998  Ian Lance Taylor  <ian@cygnus.com>
 831
 832         From Peter Jeremy <peter.jeremy@auss2.alcatel.com.au>:
 833         * m68k-opc.c: Correct mulsl and mulul to use q rather than D, a,
 834         +, -, and d for ColdFire.
 835
 836         From Peter Thiemann <thiemann@informatik.uni-tuebingen.de>:
 837         * ppc-opc.c (insert_mbe): Handle wrapping bitmasks.
 838         (extract_mbe): Likewise.
 839
 840 Wed Aug 12 11:11:34 1998  Jeffrey A Law  (law@cygnus.com)
 841
 842         * m10300-opc.c: Fix typo in udf20 .. udf25 instruction opcodes.
 843
 844         * m10300-opc.c: First cut at UDF instructions.
 845
 846 Mon Aug 10 14:08:22 1998  Doug Evans  <devans@canuck.cygnus.com>
 847
 848         * m32r-opc.c: Regenerate (remove semantic descriptions).
 849
 850 Mon Aug 10 12:51:12 1998  Catherine Moore  <clm@cygnus.com>
 851
 852         * arm-dis.c (print_insn_big_arm):  Fix indentation.
 853         (print_insn_little_arm): Likewise.
 854
 855 Sun Aug  9 20:17:28 1998  Catherine Moore  <clm@cygnus.com>
 856
 857         * arm-dis.c (print_insn_big_arm):  Check for thumb symbol
 858         attributes.
 859         (print_insn_little_arm): Likewise.
 860
 861 Mon Aug  3 12:43:16 1998  Doug Evans  <devans@seba.cygnus.com>
 862
 863         Move all global state data into opcode table struct, and treat
 864         opcode table as something that is "opened/closed".
 865         * cgen-asm.c (all fns): New first arg of opcode table descriptor.
 866         (cgen_asm_init): Delete.
 867         (cgen_set_parse_operand_fn): New function.
 868         * cgen-dis.c (all fns): New first arg of opcode table descriptor.
 869         (cgen_dis_init): Delete.
 870         * cgen-opc.c (all fns): New first arg of opcode table descriptor.
 871         (cgen_current_{opcode_table_mach,endian}): Delete.
 872         * m32r-asm.c,m32r-dis.c,m32r-opc.c,m32r-opc.h: Regenerate.
 873
 874 Thu Jul 30 21:41:10 1998  Frank Ch. Eigler  <fche@cygnus.com>
 875
 876         * d30v-opc.c (d30v_opcode_table): Add new "LKR" flag to some
 877         instructions.
 878
 879 Tue Jul 28 11:00:09 1998  Jeffrey A Law  (law@cygnus.com)
 880
 881         * m10300-opc.c: Add entries for "no_match_operands" field in
 882         the opcode table.
 883
 884 Fri Jul 24 11:41:37 1998  Doug Evans  <devans@canuck.cygnus.com>
 885
 886         * m32r-asm.c,m32r-opc.c: Regenerate (-Wall cleanups).
 887
 888 Tue Jul 21 13:41:07 1998  Doug Evans  <devans@seba.cygnus.com>
 889
 890         * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
 891
 892 Mon Jul 13 14:53:59 1998  Alan Modra  <alan@spri.levels.unisa.edu.au>
 893
 894         * i386-dis.c (ckprefix): Handle fwait specially only when it isn't
 895         the first prefix.
 896         (dofloat): Correct test for fnstsw.  Print `fnstsw %ax' rather
 897         than `fnstsw %eax'.
 898         (OP_J): Remove unnecessary subtraction when 16-bit displacement
 899         will be masked later.
 900
 901 Thu Jul  2 17:11:27 1998  Doug Evans  <devans@seba.cygnus.com>
 902
 903         * m32r-opc.h (CGEN_MIN_INSN_SIZE): New #define.
 904
 905 Wed Jul  1 16:11:16 1998  Doug Evans  <devans@seba.cygnus.com>
 906
 907         * m32r-asm.c,m32r-dis.c,m32r-opc.c,m32r-opc.h: Regenerate.
 908
 909 Fri Jun 26 11:08:55 1998  Jeffrey A Law  (law@cygnus.com)
 910
 911         * m10300-dis.c: Only recognize instructions from the currently
 912         selected machine.
 913         * m10300-opc.c: Add field indicating the particular variant of
 914         the mn10300 each instruction is available on.
 915
 916 Fri Jun 26 12:04:21 1998  Ian Lance Taylor  <ian@cygnus.com>
 917
 918         * configure.in: For bfd_vax_arch, build vax-dis.lo.
 919         * Makefile.am: Rebuild dependencies.
 920         (CFILES): Add vax-dis.c.
 921         (ALL_MACHINES): Add vax-dis.lo.
 922         * aclocal.m4: Rebuild with current libtool.
 923         * configure, Makefile.in: Rebuild.
 924
 925 Fri Jun 26 12:03:20 1998  Klaus Kaempf  <kkaempf@progis.de>
 926
 927         * vax-dis.c: New file, from work by Pauline Middelink
 928         <middelin@polyware.iaf.nl>.
 929         * disassemble.c (ARCH_vax): Define if ARCH_all.
 930         (disassembler): Add case for ARCH_vax.
 931         * makefile.vms: Support compilation on vms/vax.
 932
 933 Tue Jun 23 19:42:18 1998  Mark Alexander  <marka@cygnus.com>
 934
 935         * m10200-dis.c (print_insn_mn10200): Fix various non-portabilities
 936         related to sign extension and the size of ints.
 937
 938 Tue Jun 23 10:59:26 1998  Jeffrey A Law  (law@cygnus.com)
 939
 940         * m10300-opc.c: Support one operand "asr", "lsr" and "asl"
 941         instructions.  Support (sp) addressing mode by expanding it into
 942         (0,sp).
 943
 944 Sat Jun 20 14:46:20 1998  Frank Ch. Eigler  <fche@cygnus.com>
 945
 946         * mips-dis.c (_print_insn_mips): Fix argument interchange typo.
 947
 948 Fri Jun 19 09:16:42 1998  Mark Alexander  <marka@cygnus.com>
 949
 950         * m10200-dis.c (print_insn_mn10200): Recognize 'break' pseudo-op.
 951
 952 1998-06-18  Ulrich Drepper  <drepper@cygnus.com>
 953
 954         * i386-dis.c: Add support for fxsave, fxrstor, sysenter and
 955         sysexit.
 956
 957 Thu Jun 18 10:22:24 1998  John Metzler  <jmetzler@cygnus.com>
 958
 959         * mips-dis.c (print_insn_little_mips): Previously, instruction
 960         printing references the symbol table to determine whether the
 961         instruction resides in a block regular instructions or mips16
 962         instructions. However, when the disassembler gets used in other
 963         environments where the symbol table is not present, we no longer
 964         rely in the symbol table, rather, use the low bit of the
 965         instructions address to guess. There should be no change for usage
 966         of the disassembler in host based programs, gdb, objdump.
 967         (print_insn_big_mips): ditto.
 968         (print_insn_mips): ditto
 969
 970 Wed Jun 17 21:19:01 1998  Mark Alexander  <marka@cygnus.com>
 971
 972         * m10200-dis.c (print_insn_mn10200): Don't bomb on unknown opcodes.
 973
 974 Wed Jun 17 17:49:23 1998  Jeffrey A Law  (law@cygnus.com)
 975
 976         * m10300-opc.c (mn10300_opcodes): Change opcode for "syscall".
 977
 978 Tue Jun 16 13:10:51 1998  Alan Modra  <alan@spri.levels.unisa.edu.au>
 979
 980         * i386-dis.c (index16): Add '%' to register names.  Use ','
 981         instead of '+'.
 982
 983 Sat Jun 13 11:33:55 1998  Alan Modra  <alan@spri.levels.unisa.edu.au>
 984
 985         * i386-dis.c: Don't print opcode suffix when we can figure out the
 986         size (and gas can!) by register operands, or from the default
 987         size.
 988         (putop): Handle 'A', 'B', 'L', 'P', 'Q', 'R' macros.  Rename 'C'
 989         macro to 'E'.
 990         (dis386, dis386_twobyte, grps): Use new suffix macros.
 991         (dis386): Correct imul Ib to imul sIb.  Change jnl to jge to be
 992         consistent.  Add suffix for call, jmp, lcall, ljmp, iret.  Reverse
 993         order of cmps operands to agree with Intel docs.  Correct operand
 994         of aad and aam (Ib -> sIb).  Change ud2b from 0fb8 to 0fb9 to
 995         agree with Intel docs.
 996         (print_insn_x86): Print orphan fwait before other prefixes.
 997         Return correct byte count for orphan fwait with prefixes.  Don't
 998         print `bound' operands in reverse order.
 999         (ckprefix): Stop accumulating prefixes if we get fwait.
1000         (OP_DIR): Print `$' before Ap operands of ljmp, lcall.
1001
1002 Fri Jun 12 13:40:38 1998  Tom Tromey  <tromey@cygnus.com>
1003
1004         * po/Make-in (all-yes): If maintainer mode, depend on .pot file.
1005         ($(PACKAGE).pot): Unconditionally depend on POTFILES.
1006
1007 Fri Jun 12 11:04:06 1998  Andreas Schwab  <schwab@issan.informatik.uni-dortmund.de>
1008
1009         Fix problems when bfd_vma is wider than long.
1010         * i386-dis.c: Make op_address and start_pc unsigned.
1011         (set_op): Make parameter unsigned.
1012         (print_insn_x86): Cast to bfd_vma when passing a value to
1013         print_address_func.
1014         * ns32k-dis.c (CORE_ADDR): Don't define.
1015         (print_insn_ns32k): Change type of addr to bfd_vma.  Use
1016         bfd_scan_vma to read back address.
1017         (print_insn_arg): Change type of addr to bfd_vma.  Use sprintf_vma
1018         to format it.
1019         * m68k-dis.c (COERCE32): Cast to bfd_signed_vma to avoid overflow.
1020         (NEXTULONG): New definition.
1021         (print_insn_m68k): Avoid overflow when computing third argument of
1022         print_insn_arg.
1023         (print_insn_arg): Use NEXTULONG to fetch 32 bit address values.
1024         Use disp instead of val to store offset values.
1025         (print_indexed): Use base_disp instead of word to store base
1026         displacement, to avoid overflow.
1027         * m10300-dis.c (disassemble): Cast value to long when computing
1028         pc-relative address, to get correct sign extension.
1029
1030 Wed Jun 10 15:58:37 1998  Doug Evans  <devans@canuck.cygnus.com>
1031
1032         * m32r-opc.c: Regenerate.
1033
1034 Tue Jun  9 14:27:57 1998  Nick Clifton  <nickc@cygnus.com>
1035
1036         * arm-opc.h (thumb_opcodes): Display 'add rx, rY, #0' insns as
1037         'mov rX, rY'.  Patch courtesy of Tony Thompson <Tony.Thompson@arm.com>
1038
1039 Mon Jun  8 18:17:21 1998  Nick Clifton  <nickc@cygnus.com>
1040
1041         * d30v-opc.c: Remove FALG_MUL32 attribyte from MULX2H insn.
1042
1043 Fri Jun  5 23:47:55 1998  Alan Modra  <alan@spri.levels.unisa.edu.au>
1044
1045         * i386-dis.c:  Combine aflag and dflag into sizeflag.  Change OP_*
1046         functions to void.
1047         (OP_DSreg): Rename from OP_DSSI.
1048         (OP_ESreg): Rename from OP_ESDI.
1049         (Xb, Xv, Yb, Yv): Use index reg code, not b_mode or v_mode.
1050         (DSBX): Define.
1051         (append_seg): Rename from append_prefix.
1052         (ptr_reg): New function.
1053         (dis386): Add S suffix to pushf, popf, ret, lret, enter, leave.
1054         Add DSBX for xlat.
1055         (PREFIX_ADDR): Rename from PREFIX_ADR.
1056         (float_reg): Add non-broken opcodes for people who don't want
1057         UNIXWARE_COMPAT.
1058
1059 Fri Jun  5 19:15:04 1998  Andreas Schwab  <schwab@issan.informatik.uni-dortmund.de>
1060
1061         * m68k-opc.c (tstb, tstw, tstl): Don't allow pcrel on
1062         68000/68008/68010.
1063
1064 Wed Jun  3 18:56:22 1998  H.J. Lu  <hjl@gnu.org>
1065
1066         * i386-dis.c (dis386): Change 0x60 to "pushaS", 0x61 to "popaS".
1067
1068 Tue Jun  2 15:06:46 1998  Geoff Keating  <geoffk@ozemail.com.au>
1069
1070         * ppc-opc.c (powerpc_macros): Support shifts and rotates of size
1071         0; produce error message for shifts of size 32 (or 64 for 64-bit
1072         shifts), because the hardware doesn't support them.
1073
1074 Wed May 27 15:29:13 1998  Nick Clifton  <nickc@cygnus.com>
1075
1076         * d30v-opc.c: Add new operand: Ra3.  Change SHORT_B3, SHORT_B3b,
1077         LONG_2, LONG_2b formats to use this new operand.
1078
1079 Tue May 26 20:47:48 1998  Stan Cox  <scox@cygnus.com>
1080
1081         * sparc-dis.c (compute_arch_mask): Added bfd_mach_sparc_sparclite_le.
1082
1083 Tue May 26 20:45:33 1998  Mark Alexander  <marka@cygnus.com>
1084
1085         * sparc-dis.c (print_insn_sparc): big endian instruction / little
1086         endian data support.
1087
1088 Tue May 26 16:14:39 1998  Nick Clifton  <nickc@cygnus.com>
1089
1090         * d30v-opc.c (d30v_format_table): Change definition of SHORT_B3
1091         and SHORT_B3b formats to use Rb instead of Ra.
1092
1093         Add FLAG_MUL16 to MUL2XH opcode.
1094
1095         Add FLAG_ADDSUBppp to SRC and SATHp opcodes to implement extension
1096         to existing 1.1.1 parallelisation prohibition procedure.
1097
1098 Fri May 22 16:00:00 1998  Doug Evans  <devans@canuck.cygnus.com>
1099
1100         * m32r-asm.c,m32r-dis.c: Regenerate.
1101
1102 Tue May 19 17:36:08 1998  Ian Lance Taylor  <ian@cygnus.com>
1103
1104         * mips-dis.c (print_mips16_insn_arg): Handle type ']' correctly
1105         with a shift count of 0.
1106
1107 Fri May 15 14:58:31 1998  Doug Evans  <devans@seba.cygnus.com>
1108
1109         * cgen-opc.c (cgen_hw_lookup_by_name): Renamed from cgen_hw_lookup.
1110         (cgen_hw_lookup_by_num): New function.
1111
1112 Wed May 13 17:03:59 1998  Doug Evans  <devans@canuck.cygnus.com>
1113
1114         * m32r-asm.c: Regenerate (handle uppercase HIGH/SHIGH/LOW/SDA).
1115
1116 Wed May 13 14:34:31 1998  Mark Alexander  <marka@cygnus.com>
1117
1118         * sparc-dis.c (print_insn_sparc): Always fetch instructions
1119         as big-endian on SPARClite.
1120
1121 Tue May 12 11:46:31 1998  Richard Henderson  <rth@cygnus.com>
1122
1123         * d30v-opc.c (pre_defined_register): Remove alias for r0.
1124
1125 Sun May 10 22:37:22 1998  Jeffrey A Law  (law@cygnus.com)
1126
1127         * po/Make-in (install-info): New target.
1128
1129 Thu May  7 17:15:59 1998  Ian Lance Taylor  <ian@cygnus.com>
1130
1131         * configure.in (WIN32LIBADD): Add -lintl on cygwin32.
1132         * configure: Rebuild.
1133
1134 Thu May  7 12:49:46 1998  Frank Ch. Eigler  <fche@cygnus.com>
1135
1136         * mips-opc.c (teq,tge,tgeu,tlt,tltu,tne): Added three-operand
1137         variety of ISA2 instructions to set bottom ten bits of trap code.
1138
1139 Thu May  7 11:54:25 1998  Ian Lance Taylor  <ian@cygnus.com>
1140
1141         * Makefile.am (config.status): Add explicit target so that
1142         config.status depends upon bfd/configure.in.
1143         * Makefile.in: Rebuild.
1144
1145 Thu May  7 09:33:02 1998  Frank Ch. Eigler  <fche@cygnus.com>
1146
1147         * mips-opc.c (break, sdbbp): Added two-operand variety of ISA1
1148         instructions to set bottom ten bits of break code.
1149         * mips-dis.c (print_insn_arg): Implement 'q' operand format used
1150         for above optional argument.
1151
1152 Wed May  6 15:30:06 1998  Klaus Kaempf  <kkaempf@progis.de>
1153
1154         * makefile.vms: Run dec c with /nodebug.
1155
1156 Mon May  4 10:19:57 1998  Tom Tromey  <tromey@cygnus.com>
1157
1158         * Makefile.in: Rebuilt.
1159         * Makefile.am: Regenerated dependencies with mkdep.
1160
1161         * opintl.h (_): Define as dgettext.
1162
1163 Tue Apr 28 14:12:12 1998  Nick Clifton  <nickc@cygnus.com>
1164
1165         * cgen-asm.c: Internationalised.
1166         * m32r-asm.c: Internationalised.
1167         * m32r-dis.c: Internationalised.
1168         * m32r-opc.c: Internationalised.
1169
1170         * aclocal.m4: Regenerated.
1171         * configure: Regenerated.
1172         * Makefile.am (POTFILES): Remove inclusion of BFD_H.
1173         * Makefile.in: Rebuild.
1174         * po/POTFILES.in: Rebuilt using rule in Makefile.in.
1175         * po/opcodes.pot: Rebuilt after changing POTFILES.in.
1176
1177 Tue Apr 28 13:13:13 1998  Ian Lance Taylor  <ian@cygnus.com>
1178
1179         * configure.in: Call AC_ISC_POSIX near start.  Move CY_GNU_GETTEXT
1180         after AC_PROG_CC.
1181         * aclocal.m4, configure: Rebuild with current tools.
1182
1183 Mon Apr 27 14:31:00 1998  Nick Clifton  <nickc@cygnus.com>
1184
1185         * opintl.h: New file - contains internationalisation macros used
1186         by source files in this directory.
1187         * po/: New subdirectory - contains internationalisation files.
1188         * po/Make-in: New file - Makefile constructor.
1189         * po/POTFILES.in: New file - list of files in opcodes directory
1190         that should be scan for internationalisation macros.
1191         * po/opcodes.pot: New file - list of internationisation strings
1192         found in files mentioned in po/POTFILES.in.
1193         * Makefile.am: Add rule to build po/POTFILES.in.  Add SUBDIRS
1194         entry.  Add intl directory to include paths.
1195         * acconfig.h: Add ENABLE_NLS, HAVE_CATGETS, HAVE_GETEXT,
1196         HAVE_STRCPY, HAVE_LC_MESSAGES
1197         * configure.in: Add rule to build Makefile in po subdirectory.
1198         * Makefile.in: Rebuilt.
1199         * aclocal.m4: Rebuilt.
1200         * config.in: Rebuilt.
1201         * configure: Rebuilt.
1202         * alpha-opc.c: Internationalised.
1203         * arc-dis.c: Internationalised.
1204         * arc-opc.c: Internationalised.
1205         * arm-dis.c: Internationalised.
1206         * cgen-asm.c: Internationalised.
1207         * d30v-dis.c: Internationalised.
1208         * dis-buf.c: Internationalised.
1209         * h8300-dis.c: Internationalised.
1210         * h8500-dis.c: Internationalised.
1211         * i386-dis.c: Internationalised.
1212         * m10200-dis.c: Internationalised.
1213         * m10300-dis.c: Internationalised.
1214         * m68k-dis.c: Internationalised.
1215         * m88k-dis.c: Internationalised.
1216         * mips-dis.c: Internationalised.
1217         * ns32k-dis.c: Internationalised.
1218         * opintl.h: Internationalised.
1219         * ppc-opc.c: Internationalised.
1220         * sparc-dis.c: Internationalised.
1221         * v850-dis.c: Internationalised.
1222         * v850-opc.c: Internationalised.
1223
1224 Mon Apr 27 10:33:56 1998  Doug Evans  <devans@seba.cygnus.com>
1225
1226         * cgen-asm.c (cgen_current_opcode_table): Renamed from ..._data.
1227         (asm_hash_table_entries): New variable.
1228         (cgen_asm_init): Free asm_hash_table_entries.
1229         (hash_insn_array,hash_insn_list): New functions.
1230         (build_asm_hash_table): Use them.  Hash macro insns as well.
1231         (cgen_asm_lookup_insn): Update.
1232         * cgen_dis.c (cgen_current_opcode_table): Renamed from ..._data.
1233         (dis_hash_table_entries): New variable.
1234         (cgen_dis_init): Free dis_hash_table_entries.
1235         (hash_insn_array,hash_insn_list): New functions.
1236         (build_dis_hash_table): Use them.  Hash macro insns as well.
1237         (cgen_dis_lookup_insn): Update.
1238         * cgen-opc.c (cgen_current_opcode_table): Renamed from ..._data.
1239         (cgen_set_cpu,cgen_hw_lookup,cgen_insn_count): Update.
1240         (cgen_macro_insn_count): New function.
1241         * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
1242
1243 Fri Apr 24 16:07:57 1998  Alan Modra  <alan@spri.levels.unisa.edu.au>
1244
1245         * i386-dis.c (OP_DSSI): Print segment override.
1246
1247 Mon Apr 13 16:59:39 1998  Nick Clifton  <nickc@cygnus.com>
1248
1249         * arm-dis.c (print_insn_arm): Add "_all" extension to 'C'
1250         operator.
1251
1252 Mon Apr 13 16:50:27 1998  Ian Lance Taylor  <ian@cygnus.com>
1253
1254         * Makefile.am (libopcodes_la_LIBADD): Add @WIN32LIBADD@.
1255         (libopcodes_la_LDFLAGS): Add @WIN32LDFLAGS@.
1256         * configure.in: Define and substitute WIN32LDFLAGS and
1257         WIN32LIBADD.
1258         * aclocal.m4: Rebuild with new libtool.
1259         * configure, Makefile.in: Rebuild.
1260
1261 Fri Apr 10 18:14:31 1998  Doug Evans  <devans@canuck.cygnus.com>
1262
1263         * m32r-opc.c: Regenerate.
1264
1265 Sun Apr  5 16:04:39 1998  H.J. Lu  <hjl@gnu.org>
1266
1267         * Makefile.am (stamp-lib): Check that .libs/libopcodes.a exists
1268         before trying to copy it.
1269         * Makefile.in: Rebuild.
1270
1271 Thu Apr  2 17:25:49 1998  Nick Clifton  <nickc@cygnus.com>
1272
1273         * m32r-opc.c: Use signed immediate values for CMPUI instruction.
1274
1275 Wed Apr  1 16:20:27 1998  Ian Dall  <Ian.Dall@dsto.defence.gov.au>
1276
1277         * ns32k-dis.c (bit_extract_simple): New function to extract bits
1278         from an arbitrary valid buffer instead of fetching them on demand
1279         using fetch_data().
1280         (invalid_float): use bit_extract_simple() instead of bit_extract().
1281
1282 Tue Mar 31 11:09:08 1998  Ian Lance Taylor  <ian@cygnus.com>
1283
1284         From H.J. Lu <hjl@gnu.org>:
1285         * i386-dis.c (dis386): Change 0x8c and 0x8e to movS, and change Ew
1286         to Ev for both.
1287
1288 Mon Mar 30 17:32:03 1998  Ian Lance Taylor  <ian@cygnus.com>
1289
1290         * Branched binutils 2.9.
1291
1292 Mon Mar 30 15:18:00 1998  Ken Raeburn  <raeburn@cygnus.com>
1293
1294         * d30v-dis.c (print_insn_d30v): Don't use uninitialized "num" when
1295         disassembling last 4 bytes of a section.
1296
1297 Fri Mar 27 18:08:13 1998  Ian Lance Taylor  <ian@cygnus.com>
1298
1299         Fix some gcc -Wall warnings:
1300         * arc-dis.c (print_insn): Add casts to avoid warnings.
1301         * cgen-opc.c (cgen_keyword_lookup_name): Likewise.
1302         * d10v-dis.c (dis_long, dis_2_short): Likewise.
1303         * m10200-dis.c (disassemble): Likewise.
1304         * m10300-dis.c (disassemble): Likewise.
1305         * ns32k-dis.c (print_insn_ns32k): Likewise.
1306         * ppc-opc.c (insert_ral, insert_ram): Likewise.
1307         * cgen-dis.c (build_dis_hash_table): Remove used local variables.
1308         * cgen-opc.c (cgen_keyword_search_next): Likewise.
1309         * d10v-dis.c (dis_long, dis_2_short): Likewise.
1310         * d30v-dis.c (print_insn_d30v, lookup_opcode): Likewise.
1311         * ns32k-dis.c (bit_extract, print_insn_ns32k): Likewise.
1312         * tic80-dis.c (print_one_instruction): Likewise.
1313         * w65-dis.c (print_operand): Likewise.
1314         * z8k-dis.c (fetch_data): Likewise.
1315         * a29k-dis.c: Add return type for find_byte_func_type.
1316         * arc-opc.c: Include <stdio.h>.  Remove declarations of
1317         insert_multshift and extract_multshift.
1318         * d30v-dis.c (lookup_opcode): Parenthesize assignments in
1319         conditionals.
1320         (extract_value): Fully parenthesize expression.
1321         * h8500-dis.c (print_insn_h8500): Initialize local variables.
1322         * h8500-opc.h (h8500_table): Fully bracket initializer.
1323         * w65-opc.h (optable): Likewise.
1324         * i386-dis.c (print_insn_x86): Declare aflag and flag parameters.
1325         * i386-dis.c (OP_E): Initialize local variables.
1326         * m10200-dis.c (print_insn_mn10200): Likewise.
1327         * mips-dis.c (print_insn_mips16): Likewise.
1328         * sh-dis.c (print_insn_shx): Likewise.
1329         * v850-dis.c (print_insn_v850): Likewise.
1330         * ns32k-dis.c (print_insn_arg): Declare.
1331         (get_displacement, invalid_float): Declare.
1332         (list_search, sign_extend, flip_bytes): Declare return type.
1333         (get_displacement): Likewise.
1334         (print_insn_arg): Likewise.  Make d int.  Fix sprintf format
1335         string.
1336         (print_insn_ns32k): Make i unsigned.
1337         (invalid_float): Make static.  Declare type of val.
1338         * tic30-dis.c (print_par_insn): Make i size_t.  Don't check strlen
1339         on each for iteration.
1340         * tic30-dis.c (get_indirect_operand): Likewise.
1341         * z8k-dis.c (print_insn_z8001): Declare return type.
1342         (print_insn_z8002): Likewise.
1343         (unparse_instr): Fix sprintf format strings.
1344
1345 Fri Mar 27 00:05:23 1998  Jeffrey A Law  (law@cygnus.com)
1346
1347         * mips-opc.c: Add "sync.l" and "sync.p".
1348
1349 Wed Mar 25 14:32:48 1998  Andreas Schwab  <schwab@issan.informatik.uni-dortmund.de>
1350
1351         * m68k-dis.c (print_insn_m68k): Use info->mach to select the
1352         default m68k variant to recognize.
1353
1354         * i960-dis.c (pinsn): Change type of first argument to bfd_vma.
1355         (ctrl, cobr, mem, ea): Likewise.
1356         (print_addr): Likewise.  Remove cast.
1357         (ea): Cast argument of print_addr to bfd_vma.
1358
1359         * cgen-asm.c (cgen_parse_signed_integer): Fix type of local
1360         variable value.
1361         (cgen_parse_unsigned_integer): Likewise.
1362         (cgen_parse_address): Likewise.
1363
1364 Wed Mar 25 14:31:31 1998  Ian Lance Taylor  <ian@cygnus.com>
1365
1366         * i960-dis.c (ctrl): Add full braces to structure initialization.
1367         (cobr, mem, reg): Likewise.
1368         (ea): Correct parenthesization in expression.
1369
1370         * cgen-asm.c: Include <ctype.h>.
1371         (build_asm_hash_table): Remove unused local variable i.
1372         (cgen_parse_keyword): Add casts to avoid warnings.
1373
1374         * arm-dis.c (print_insn_big_arm): Only call coffsymbol for a COFF
1375         symbol.  Fix indentation.
1376         (print_insn_little_arm): Likewise.
1377
1378 Fri Mar 20 18:55:18 1998  Ian Lance Taylor  <ian@cygnus.com>
1379
1380         * configure.in: Use AM_DISABLE_SHARED.
1381         * aclocal.m4, configure: Rebuild with libtool 1.2.
1382
1383 Thu Mar 19 15:46:53 1998  Nick Clifton  <nickc@cygnus.com>
1384
1385         These patches are courtesy of Jonathan Walton and Tony Thompson
1386         (athompso@cambridge.arm.com).
1387
1388         * arm-dis.c (print_insn_thumb): Ignore bottom two bits of PC
1389         relative addresses.
1390
1391         * arm-opc.h (thumb_opcodes): Annotate PC relative addresses with
1392         both the offset and the label closest to the destination.
1393
1394 Sat Mar 14 23:47:14 1998  Doug Evans  <devans@seba.cygnus.com>
1395
1396         * m32r-opc.h: Regenerate.
1397
1398 Wed Mar  4 12:08:14 1998  Doug Evans  <devans@canuck.cygnus.com>
1399
1400         * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
1401
1402 Sat Feb 28 16:02:34 1998  Nick Clifton  <nickc@cygnus.com>
1403
1404         * arm-dis.c (print_insn_big_arm, print_insn_little_arm): Do not
1405         assume that info->symbols is non-empty.
1406
1407 Sat Feb 28 12:19:05 1998  Richard Henderson  <rth@cygnus.com>
1408
1409         * alpha-opc.c (cvtqs) There is no such thing.
1410         (cvttq): Missing most of the /*d variants.
1411
1412 Thu Feb 26 15:53:09 1998  Michael Meissner  <meissner@cygnus.com>
1413
1414         * d30v-opc.c (d30v_opcode_table): Indicate which instructions are
1415         delayed branches or jumps.
1416
1417 Tue Feb 24 10:46:44 1998  Doug Evans  <devans@canuck.cygnus.com>
1418
1419         * arm-dis.c (print_insn_{big,little}_arm): info->symbol changed
1420         to *info->symbols.
1421         * mips-dis.c (print_insn_{big,little}_mips): Likewise.
1422         * tic30-dis.c (print_branch): Likewise.
1423
1424 Tue Feb 24 11:06:18 1998  Nick Clifton  <nickc@cygnus.com>
1425
1426         * arm-dis.c (print_insn_big_arm, print_insn_little_arm): Remove
1427         saved_symbol code as it is no longer needed.
1428
1429 Mon Feb 23 13:16:17 1998  Doug Evans  <devans@seba.cygnus.com>
1430
1431         * cgen-asm.c: Include symcat.h.
1432         * cgen-dis.c,cgen-opc.c: Ditto.
1433         * m32r-asm.c,m32r-dis.c,m32r-opc.h,m32r-opc.c: Regenerate.
1434
1435 Mon Feb 23 10:34:58 1998  Jeffrey A Law  (law@cygnus.com)
1436
1437         * mips-dis.c (print_insn_arg): Do not prefix 'P' arguments with '$'.
1438
1439 Thu Feb 19 16:51:13 1998  Doug Evans  <devans@canuck.cygnus.com>
1440
1441         * m32r-opc.[ch]: Regenerate.
1442
1443 Tue Feb 17 17:14:50 1998  Doug Evans  <devans@seba.cygnus.com>
1444
1445         * cgen-asm.c (cgen_parse_{signed,unsigned}_integer): Delete min,max
1446         arguments.  Don't perform validation here.
1447         * m32r-asm.c,m32r-dis.c,m32r-opc.c: Regenerate.
1448
1449 Fri Feb 13 14:26:06 1998  Doug Evans  <devans@canuck.cygnus.com>
1450
1451         * m32r-opc.c: Regenerate.
1452
1453 Fri Feb 13 14:53:02 1998  Ian Lance Taylor  <ian@cygnus.com>
1454
1455         * Makefile.am (AUTOMAKE_OPTIONS): Define.
1456         * configure, Makefile.in, aclocal.m4: Rebuild with automake 1.2e.
1457
1458 Fri Feb 13 10:21:09 1998  Mark Alexander  <marka@cygnus.com>
1459
1460         * m10300-dis.c (print_insn_mn10300): Recognize break instruction.
1461
1462 Fri Feb 13 13:12:14 1998  Ian Lance Taylor  <ian@cygnus.com>
1463
1464         * configure.in: Get the version number from BFD.
1465         * configure: Rebuild.
1466
1467         From H.J. Lu <hjl@gnu.org>:
1468         * Makefile.am (libopcodes_la_LDFLAGS): Define.
1469         * Makefile.in: Rebuild.
1470
1471 Fri Feb 13 09:50:32 1998  Nick Clifton  <nickc@cygnus.com>
1472
1473         * m32r-opc.c: Regenerate.
1474         * m32r-opc.h: Regenerate.
1475
1476 Thu Feb 12 11:01:40 1998  Doug Evans  <devans@canuck.cygnus.com>
1477
1478         * m32r-opc.c: Regenerate.
1479
1480 Thu Feb 12 03:41:00 1998  J"orn Rennecke  <amylaar@cygnus.co.uk>
1481
1482         Fix rac to accept only a0:
1483         * d10v-opc.c (d10v_predefined_registers, d10v_operands, d10v_opcodes):
1484         Split OPERAND_ACC into OPERAND_ACC0 and OPERAND_ACC1.
1485         Introduce OPERAND_GPR.
1486         * d10v-dis.c (print_operand): Likewise.
1487
1488 Wed Feb 11 18:58:34 1998  Doug Evans  <devans@seba.cygnus.com>
1489
1490         * cgen-opc.c (cgen_set_cpu): Delete init of hw list `next' chain.
1491         (cgen_hw_lookup): Make result const.
1492         * m32r-opc.h, m32r-opc.c, m32r-asm.c, m32r-dis.c: Regenerate.
1493
1494 Sat Feb  7 15:30:27 1998  Ian Lance Taylor  <ian@cygnus.com>
1495
1496         * configure, aclocal.m4: Rebuild with new libtool.
1497
1498 Thu Feb  5 17:56:10 1998  Michael Meissner  <meissner@cygnus.com>
1499
1500         * d30v-opc.c (repeat{,i} instructions): Repeat/repeati
1501         instructions use a PC relative branch, not absolute.
1502
1503 Wed Feb  4 19:17:37 1998  Ian Lance Taylor  <ian@cygnus.com>
1504
1505         * configure.in: Set libtool_enable_shared rather than
1506         libtool_shared.  Remove diversion hack.
1507         * configure, Makefile.in, aclocal.m4: Rebuild with new libtool.
1508
1509 Tue Feb  3 17:19:40 1998  Doug Evans  <devans@seba.cygnus.com>
1510
1511         * cgen-opc.c (cgen_set_cpu): Initialize hardware table.
1512         * m32r-opc.h, m32r-opc.c, m32r-asm.c, m32r-dis.c: Regenerate.
1513
1514 Mon Feb  2 19:22:15 1998  Steve Haworth  <steve@pm.cse.rmit.EDU.AU>
1515
1516         * tic30-dis.c: New file.
1517         * disassemble.c (disassembler): Add bfd_arch_tic30 case.
1518         * configure.in: Handle bfd_tic30_arch.
1519         * Makefile.am: Rebuild dependencies.
1520         (CFILES): Add tic30-dis.c
1521         (ALL_MACHINES): Add tic30-dis.lo.
1522         * configure, Makefile.in: Rebuild.
1523
1524 Thu Jan 29 13:02:56 1998  Doug Evans  <devans@canuck.cygnus.com>
1525
1526         * m32r-opc.h (HAVE_CPU_M32R): Define.
1527
1528 Wed Jan 28 09:55:03 1998  Nick Clifton  <nickc@cygnus.com>
1529
1530         * v850-opc.c (insertion routines): If both alignment and size is
1531         wrong then report this.
1532
1533 Tue Jan 27 21:52:59 1998  Jeffrey A Law  (law@cygnus.com)
1534
1535         * mips-dis.c (_print_insn_mips): Set target_processor as appropriate.
1536         Only recognize instructions for the current target_processor.
1537
1538 Thu Jan 22 16:20:17 1998  Fred Fish  <fnf@cygnus.com>
1539
1540         * d10v-dis.c (PC_MASK): Correct value.
1541         (print_operand): If there's a reloc, don't calculate the
1542         address because they could be in different sections.
1543
1544 Fri Jan 16 15:29:11 1998  Jim Blandy  <jimb@zwingli.cygnus.com>
1545
1546         * mips-opc.c (mips_builtin_opcodes): Move 4010's "addciu"
1547         instruction after the 4650's "mul" instruction; nobody's using the
1548         4010 these days.  If object files someday indicate which processor
1549         variant they're intended for, we can do a better job at this.
1550
1551 Mon Jan 12 14:43:54 1998  Doug Evans  <devans@seba.cygnus.com>
1552
1553         * cgen-asm.c (build_asm_hash_table): Traverse compiled in table using
1554         table provided entry size.  Use CGEN_INSN_MNEMONIC.
1555         (cgen_parse_keyword): Rewrite.
1556         * cgen-dis.c (build_dis_hash_table): Traverse compiled in table using
1557         table provided entry size.  Use CGEN_INSN_MASK_BITSIZE.
1558         * cgen-opc.c: Clean up pass over `struct foo' usage.
1559         (cgen_keyword_lookup_value): Handle "" entry.
1560         (cgen_keyword_add): Likewise.
1561
1562 Mon Dec 22 12:37:06 1997  Ian Lance Taylor  <ian@cygnus.com>
1563
1564         * mips-opc.c: Add FP_D to s.d instruction flags.
1565
1566 Wed Dec 17 11:38:29 1997  Andreas Schwab  <schwab@issan.informatik.uni-dortmund.de>
1567
1568         * m68k-opc.c (halt, pulse): Enable them on the 68060.
1569
1570 Tue Dec 16 15:22:53 1997  Fred Fish  <fnf@cygnus.com>
1571
1572         * tic80-opc.c (tic80_opcodes): Revert change that put the 32 bit
1573         PC relative offset forms before the 15 bit forms.  An assembler command
1574         line option now chooses the default.
1575
1576 Tue Dec 16 15:22:51 1997  Michael Meissner  <meissner@cygnus.com>
1577
1578         * d30v-opc.c (d30v_opcode_table): Set new flags bits
1579         FLAG_{2WORD,MUL{16,32},ADDSUBppp}, in appropriate instructions.
1580
1581 1997-12-15  Brendan Kehoe  <brendan@lisa.cygnus.com>
1582
1583         * configure: Only build libopcodes shared if --enable-shared's value
1584         was `yes', or was set to `*opcodes*'.
1585         * aclocal.m4: Likewise.
1586         * NOTE: this really needs to be fixed in libtool/libtool.m4, the
1587         original source of this bit of code.  It's not clear what the best fix
1588         would be, though.
1589
1590 Fri Dec 12 11:57:04 1997  Fred Fish  <fnf@cygnus.com>
1591
1592         * tic80-opc.c (OFF_SL_PC, OFF_SL_BR): Minor formatting change.
1593         (tic80_opcodes): Reorder table entries to put the 32 bit PC relative
1594         offset forms before the 15 bit forms, to default to the long forms.
1595
1596 Fri Dec 12 01:32:30 1997  Richard Henderson  <rth@cygnus.com>
1597
1598         * alpha-opc.c (cvttq/*u*): Remove, as that suffix is invalid.
1599
1600 Wed Dec 10 17:42:35 1997  Nick Clifton  <nickc@cygnus.com>
1601
1602         * arm-dis.c (print_insn_little_arm): Prevent examination of stored
1603         symbol if none is present.
1604         (print_insn_big_arm):  Prevent examination of stored symbol if
1605         none is present.
1606
1607 Thu Oct 23 21:13:37 1997  Fred Fish  <fnf@cygnus.com>
1608
1609         * d10v-opc.c (d10v_opcodes): Correct entry for RTE.
1610
1611 Mon Dec  8 11:21:07 1997  Nick Clifton  <nickc@cygnus.com>
1612
1613         * disassemble.c: Remove disasm_symaddr() function.
1614
1615         * arm-dis.c: Use info->symbol instead of info->flags to determine
1616         if disassmbly should be in Thumb or Arm mode.
1617
1618 Tue Dec  2 09:54:27 1997  Nick Clifton  <nickc@cygnus.com>
1619
1620         * arm-dis.c: Add support for disassembling Thumb opcodes.
1621         (print_insn_thumb): New function.
1622
1623         * disassemble.c (disasm_symaddr): New function.
1624
1625         * arm-opc.h: Display nop pseudo ops alongside equivalent disassembly.
1626         (thumb_opcodes): Table of Thumb opcodes.
1627
1628 Mon Dec  1 12:25:57 1997  Andreas Schwab  <schwab@issan.informatik.uni-dortmund.de>
1629
1630         * m68k-opc.c (btst): Change Dd@s to Dd;b.
1631
1632         * m68k-dis.c (print_insn_arg): Recognize 'm', 'n', 'o', 'p', 'q',
1633         and 'v' as operand types.
1634
1635 Mon Dec  1 11:56:50 1997  Ian Lance Taylor  <ian@cygnus.com>
1636
1637         * m68k-opc.c: Add argument for lpstop.  From Olivier Carmona
1638         <olivier.carmona@di.epfl.ch>.
1639         * m68k-dis.c (print_insn_m68k): Handle special case of lpstop,
1640         which has a two word opcode with a one word argument.
1641
1642 Sun Nov 23 22:25:21 1997  Michael Meissner  <meissner@cygnus.com>
1643
1644         * d30v-opc.c (d30v_opcode_table, case cmpu): Immediate field is
1645         unsigned, not signed.
1646         (d30v_format_table): Add SHORT_CMPU cases for cmpu.
1647
1648 Tue Nov 18 23:10:03 1997  J"orn Rennecke  <amylaar@cygnus.co.uk>
1649
1650         * d10v-dis.c (print_operand):
1651         Split OPERAND_FLAG into OPERAND_FFLAG and OPERAND_CFLAG.
1652
1653 Tue Nov 18 18:45:14 1997  J"orn Rennecke  <amylaar@cygnus.co.uk>
1654
1655         * d10v-opc.c (OPERAND_FLAG): Split into:
1656         (OPERAND_FFLAG, OPERAND_CFLAG) .
1657         (FSRC): Split into:
1658         (FFSRC, CFSRC).
1659
1660 Thu Nov 13 11:05:33 1997  Gavin Koch  <gavin@cygnus.com>
1661
1662         * mips-opc.c: Move the INSN_MACRO ISA value to the membership
1663         field for all INSN_MACRO's.
1664         * mips16-opc.c: same
1665
1666 Wed Nov 12 10:16:57 1997  Gavin Koch  <gavin@cygnus.com>
1667
1668         * mips-opc.c (sync,cache): These are 3900 insns.
1669
1670 Tue Nov 11 23:53:41 1997  J"orn Rennecke <amylaar@cygnus.co.uk>
1671
1672         sh-opc.h (sh_table): Remove ftst/nan.
1673
1674 Tue Oct 28 17:59:32 1997  Ken Raeburn  <raeburn@cygnus.com>
1675
1676         * mips-opc.c (ffc, ffs): Fix mask.
1677
1678 Tue Oct 28 16:34:54 1997  Michael Meissner  <meissner@cygnus.com>
1679
1680         * d30v-opc.c (pre_defined_registers): Add eit_vb, int_s, and int_m
1681         control registers.
1682
1683 Mon Oct 27 22:34:03 1997  Ken Raeburn  <raeburn@cygnus.com>
1684
1685         * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
1686         (WR_HILO, RD_HILO, MOD_HILO): New macros.
1687
1688 Mon Oct 27 22:34:03 1997  Ken Raeburn  <raeburn@cygnus.com>
1689
1690         * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
1691         (WR_HILO, RD_HILO, MOD_HILO): New macros.
1692
1693 Thu Oct 23 14:57:58 1997  Nick Clifton  <nickc@cygnus.com>
1694
1695         * v850-dis.c (disassemble): Replace // with /* ... */
1696
1697 Wed Oct 22 17:33:21 1997  Richard Henderson  <rth@cygnus.com>
1698
1699         * sparc-opc.c: Add wr & rd for v9a asr's.
1700         * sparc-dis.c (print_insn_sparc): Recognize '_' and '/' for v9a asr's.
1701         (v9a_asr_reg_names): New variable.
1702         Patch from David Miller <davem@vger.rutgers.edu>.
1703
1704 Wed Oct 22 17:18:02 1997  Richard Henderson  <rth@cygnus.com>
1705
1706         * sparc-opc.c (v9notv9a): New insn type.
1707         (IMPDEP): Move to the end to not conflict with edge8 et al.
1708         Patch from David Miller <davem@vger.rutgers.edu>.
1709
1710 Fri Oct 17 13:18:53 1997  Gavin Koch  <gavin@cygnus.com>
1711
1712         * mips-opc.c (bnezl,beqzl): Mark these as also tx39.
1713
1714 Thu Oct 16 11:55:20 1997  Gavin Koch  <gavin@cygnus.com>
1715
1716         * mips-opc.c: Note that 'jalx' is (probably incorrectly) marked I1.
1717
1718 Tue Oct 14 16:10:31 1997  Nick Clifton  <nickc@cygnus.com>
1719
1720         * v850-dis.c (disassemble): Use new symbol_at_address_func() field
1721         of disassemble_info structure to determine if an overlay address
1722         has a matching symbol in low memory.
1723
1724         * dis-buf.c (generic_symbol_at_address): New (dummy) function for
1725         new symbol_at_address_func field in disassemble_info structure.
1726
1727 Fri Oct 10 16:44:52 1997  Nick Clifton  <nickc@cygnus.com>
1728
1729         * v850-opc.c (extract_d22): Use signed arithmatic.
1730
1731 Tue Oct  7 23:40:43 1997  Gavin Koch  <gavin@cygnus.com>
1732
1733         * mips-opc.c: Three op mult is not an ISA insn.
1734
1735 Tue Oct  7 23:37:21 1997  Gavin Koch  <gavin@cygnus.com>
1736
1737         * mips-opc.c: Fix formatting.
1738
1739 Fri Oct  3 17:26:54 1997  Ian Lance Taylor  <ian@cygnus.com>
1740
1741         * i386-dis.c (OP_E): Explicitly sign extend 8 bit values, rather
1742         than assuming that char is signed.  Explicitly sign extend 16 bit
1743         values, rather than assuming that short is 16 bits.
1744         (OP_sI, OP_J, OP_DIR): Likewise.
1745
1746 Thu Oct  2 13:36:45 1997  Nick Clifton  <nickc@cygnus.com>
1747
1748         * v850-dis.c (v850_sreg_names): Use symbolic names for higher
1749         system registers.
1750
1751 Wed Oct  1 16:58:54 1997  Nick Clifton  <nickc@cygnus.com>
1752
1753         * v850-opc.c: Fix typo in comment.
1754
1755         * v850-dis.c (disassemble): Add test of processor type when
1756         determining opcodes.
1757
1758 Wed Oct  1 14:10:20 1997  Ian Lance Taylor  <ian@cygnus.com>
1759
1760         * configure.in: Use a diversion to set enable_shared before the
1761         arguments are parsed.
1762         * configure: Rebuild.
1763
1764 Thu Sep 25 13:04:59 1997  Ian Lance Taylor  <ian@cygnus.com>
1765
1766         * m68k-opc.c (TBL1): Use ! rather than `.
1767         * m68k-dis.c (print_insn_arg): Remove ` operand specifier.
1768
1769 Wed Sep 24 11:29:35 1997  Ian Lance Taylor  <ian@cygnus.com>
1770
1771         * m68k-opc.c: Correct bchg, bclr, bset, and btst on ColdFire.
1772
1773         * m68k-opc.c: Accept tst{b,w,l} with immediate operands on cpu32.
1774
1775         * m68k-opc.c: Correct movew of an immediate operand to %sr or %ccr
1776         for mcf5200.
1777
1778         * configure.in: Call AC_CHECK_TOOL before AM_PROG_LIBTOOL.
1779         * aclocal.m4: Rebuild with new libtool.
1780         * configure: Rebuild.
1781
1782 Fri Sep 19 11:45:49 1997  Andrew Cagney  <cagney@b1.cygnus.com>
1783
1784         * v850-opc.c ("cmov"): Order reg param r1, r2 not r2, r2.
1785
1786 Thu Sep 18 11:21:43 1997  Doug Evans  <dje@canuck.cygnus.com>
1787
1788         * sparc-opc.c (sparclet_cpreg_table): Add %ccsr2, %cccrr, %ccrstr.
1789
1790 Tue Sep 16 15:18:20 1997  Nick Clifton  <nickc@cygnus.com>
1791
1792         * v850-opc.c (v850_opcodes): Further rearrangements.
1793
1794 Tue Sep 16 16:12:11 1997  Ken Raeburn  <raeburn@cygnus.com>
1795
1796         * d30v-opc.c (rot2h, sra2h, srl2h insns): Revert last change.
1797
1798 Tue Sep 16 09:48:50 1997  Nick Clifton  <nickc@cygnus.com>
1799
1800         * v850-opc.c (v850_opcodes): Fields reordered to allow assembler
1801         parser to work.
1802
1803 Tue Sep 16 10:01:00 1997  Gavin Koch  <gavin@cygnus.com>
1804
1805         * mips-opc.c: Added tx39 insns sdbbp, rfe, and deret.
1806
1807 Mon Sep 15 18:31:52 1997  Nick Clifton  <nickc@cygnus.com>
1808
1809         * v850-opc.c: Initialise processors field of v850_opcode structure.
1810
1811 Wed Aug 27 21:42:39 1997  Ken Raeburn  <raeburn@cygnus.com>
1812
1813         Merge changes from Martin Hunt:
1814
1815         * d30v-opc.c: Change mvfacc to accept 6-bit unsigned values.
1816
1817         * d30v-opc.c (pre_defined_registers): Add control registers from 0-63.
1818         (d30v_opcode_tabel): Add dbt, rtd, srah, and srlh instructions. Fix
1819         rot2h, sra2h, and srl2h to use new SHORT_A5S format.
1820
1821         * d30v-dis.c (print_insn): Fix disassembly of SHORT_D2 opcodes.
1822
1823         * d30v-dis.c (print_insn): First operand of d*i (delayed
1824         branch) instructions is relative.
1825
1826         * d30v-opc.c (d30v_opcode_table): Change form for repeati.
1827         (d30v_operand_table): Add IMM6S3 type.
1828         (d30v_format_table): Change SHORT_D2. Add LONG_Db.
1829
1830         * d30v-dis.c: Fix bug with ".s" and ".l" extensions
1831         and cmp instructions.
1832
1833         * d30v-opc.c: Correct entries for repeat*, and sat*.
1834         Make IMM5 unsigned. Create IMM6U and IMM12S3U operand
1835         types. Correct several formats.
1836
1837         * d30v-opc.c: (pre_defined_registers): Add dpsw and dpc.
1838
1839         * d30v-opc.c (pre_defined_registers): Change control registers.
1840
1841         * d30v-opc.c (d30v_format_table): Correct SHORT_C1 and
1842         SHORT_C2.  Manual was incorrect.
1843
1844         * d30v-dis.c (lookup_opcode):  Return value now indicates
1845         if an opcode has a short and a long form.  Used for deciding
1846         to append a ".s" or ".l".
1847         (print_insn): Append a ".s" to an instruction if it is
1848         the short form and ".l" if it is a long form. Do not append
1849         anything if the instruction has only one possible size.
1850
1851         * d30v-opc.c: Change mulx2h to require an even register.
1852         New form: SHORT_A2; a SHORT_A form that needs an even
1853         register as the first operand.
1854
1855         * d30v-dis.c (print_insn_d30v): Fix problem where the last
1856         instruction was not being disassembled if there were an odd
1857         number of instructions.
1858
1859         * d30v-opc.c (SHORT_M2, LONG_M2):  Two new forms.
1860
1861 Fri Sep 12 11:43:54 1997  Nick Clifton  <nickc@cygnus.com>
1862
1863         * v850-dis.c (disassemble): Improved display of register lists.
1864
1865 Thu Sep 11 17:35:10 1997  Doug Evans  <dje@canuck.cygnus.com>
1866
1867         * sparc-opc.c (sparc_opcodes): Fix assembler args to
1868         fzeros, fones, fsrc1, fsrc1s, fsrc2s, fnot1, fnot1s, fnot2s,
1869         fors, fnors, fands, fnands, fxors, fxnors, fornot1s, fornot2s,
1870         fandnot1s, fandnot2s.
1871
1872 Tue Sep  9 10:03:49 1997  Doug Evans  <dje@canuck.cygnus.com>
1873
1874         * sparc-opc.c (sparc_opcodes): Fix op3 field for fcmpq/fcmpeq.
1875
1876 Mon Sep  8 14:06:59 1997  Doug Evans  <dje@canuck.cygnus.com>
1877
1878         * cgen-asm.c (cgen_parse_address): New argument resultp.
1879         All callers updated.
1880         * m32r-asm.c (parse_h_hi16): Right shift numbers by 16.
1881
1882 Tue Sep  2 18:39:08 1997  Jeffrey A Law  (law@cygnus.com)
1883
1884         * mn10200-dis.c (disassemble): PC relative instructions are
1885         relative to the next instruction, not the current instruction.
1886
1887 Tue Sep  2 15:41:55 1997  Nick Clifton  <nickc@cygnus.com>
1888
1889         * v850-dis.c (disassemble): Only signed extend values that are not
1890         returned by extract functions.
1891         Remove use of V850_OPERAND_ADJUST_SHORT_MEMORY flag.
1892
1893 Tue Sep  2 15:39:40 1997  Nick Clifton  <nickc@cygnus.com>
1894
1895         * v850-opc.c: Update comments.  Remove use of
1896         V850_OPERAND_ADJUST_SHORT_MEMORY.  Fix several operand patterns.
1897
1898 Tue Aug 26 09:42:28 1997  Nick Clifton  <nickc@cygnus.com>
1899
1900         * v850-opc.c (MOVHI): Immediate parameter is unsigned.
1901
1902 Mon Aug 25 15:58:07 1997  Christopher Provenzano  <proven@cygnus.com>
1903
1904         * configure: Rebuilt with latest devo autoconf for NT support.
1905
1906 Fri Aug 22 10:35:15 1997  Nick Clifton  <nickc@cygnus.com>
1907
1908         * v850-dis.c (disassemble): Use curly brace syntax for register
1909         lists.
1910
1911         * v850-opc.c (v850_opcodes[]): Add NOT_R0 flag to decect cases
1912         where r0 is being used as a destination register.
1913
1914 Thu Aug 21 11:09:09 1997  Nick Clifton  <nickc@cygnus.com>
1915
1916         * v850-opc.c (v850_opcodes[]): Move divh opcodes next to each other.
1917
1918 Tue Aug 19 10:59:59 1997  Richard Henderson  <rth@cygnus.com>
1919
1920         * alpha-opc.c (alpha_opcodes): Fix hw_rei_stall mungage.
1921
1922 Mon Aug 18 11:10:03 1997  Nick Clifton  <nickc@cygnus.com>
1923
1924         * v850-opc.c (v850_opcodes[]): Remove use of flag field.
1925         * v850-opc.c (v850_opcodes[]): Add support for reversed short load
1926         opcodes..
1927
1928 Mon Aug 18 11:08:25 1997  Nick Clifton  <nickc@cygnus.com>
1929
1930         * configure (cgen_files): Add support for v850e target.
1931         * configure.in (cgen_files):  Add support for v850e target.
1932
1933 Mon Aug 18 11:08:25 1997  Nick Clifton  <nickc@cygnus.com>
1934
1935         * configure (cgen_files): Add support for v850ea target.
1936         * configure.in (cgen_files):  Add support for v850ea target.
1937
1938 Fri Aug 15 05:17:48 1997  Doug Evans  <dje@canuck.cygnus.com>
1939
1940         * configure.in (bfd_arc_arch): Add.
1941         * configure: Rebuild.
1942         * Makefile.am (ALL_MACHINES): Add arc-dis.lo, arc-opc.lo.
1943         * Makefile.in: Rebuild.
1944         * arc-dis.c, arc-opc.c: New files.
1945         * disassemble.c (ARCH_all): Define ARCH_arc.
1946         (disassembler): Add ARC support.
1947
1948 Wed Aug 13 18:52:11 1997  Nick Clifton  <nickc@cygnus.com>
1949
1950         * v850-dis.c (disassemble): Add support for v850EA instructions.
1951
1952         * v850-opc.c (insert_i5div, extract_i5div): New Functions.
1953         (v850_opcodes): Add v850EA instructions.
1954
1955         * v850-dis.c (disassemble): Add support for v850E instructions.
1956
1957         * v850-opc.c (insert_d5_4, extract_d5_4, insert_d16_16,
1958         extract_d16_16, insert_i9, extract_i9, insert_u9, extract_u9,
1959         insert_spe, extract_spe): New Functions.
1960         (v850_opcodes): Add v850E instructions.
1961
1962         * v850-opc.c: Reorganised and re-layed out to improve readability
1963         and portability.
1964
1965 Tue Aug  5 23:09:31 1997  Ian Lance Taylor  <ian@cygnus.com>
1966
1967         * configure: Rebuild with autoconf 2.12.1.
1968
1969 Mon Aug  4 12:02:16 1997  Ian Lance Taylor  <ian@cygnus.com>
1970
1971         * aclocal.m4, configure: Rebuild with new automake patches.
1972
1973 Fri Aug  1 13:02:04 1997  Ian Lance Taylor  <ian@cygnus.com>
1974
1975         * configure.in: Set enable_shared before AM_PROG_LIBTOOL.
1976         * acinclude.m4: Just include acinclude.m4 from BFD.
1977         * aclocal.m4, configure: Rebuild.
1978
1979 Thu Jul 31 21:44:42 1997  Ian Lance Taylor  <ian@cygnus.com>
1980
1981         * Makefile.am: New file, based on old Makefile.in.
1982         * acconfig.h: New file.
1983         * acinclude.m4: New file.
1984         * stamp-h.in: New file.
1985         * configure.in: Call AM_INIT_AUTOMAKE and AM_PROG_LIBTOOL.
1986         Removed shared library handling; now handled by libtool.  Replace
1987         AC_CONFIG_HEADER with AM_CONFIG_HEADER.  Call AM_MAINTAINER_MODE,
1988         AM_CYGWIN32, and AM_EXEEXT.  Replace AC_PROG_INSTALL with
1989         AM_PROG_INSTALL.  Change all .o files to .lo.  Remove stamp-h
1990         handling in AC_OUTPUT.
1991         * dep-in.sed: Change .o to .lo.
1992         * Makefile.in: Now built with automake.
1993         * aclocal.m4: Now built with aclocal.
1994         * config.in, configure: Rebuild.
1995
1996 Mon Jul 28 21:52:24 1997  Jeffrey A Law  (law@cygnus.com)
1997
1998         * mips-opc.c: Fix typo/thinko in "eret" instruction.
1999
2000 Thu Jul 24 13:03:26 1997  Doug Evans  <dje@canuck.cygnus.com>
2001
2002         * sparc-opc.c (sparc_opcodes): Fix spelling on fpaddX, fpsubX insns.
2003         Make array const.
2004         * sparc-dis.c (sorted_opcodes): New static local.
2005         (struct opcode_hash): `opcode' is pointer to const element.
2006         (build_hash): First arg is now table of sorted pointers.
2007         (print_insn_sparc): Sort opcodes by sorting table of pointers.
2008         (compare_opcodes): Update.
2009
2010 Tue Jul 15 12:05:23 1997  Doug Evans  <dje@canuck.cygnus.com>
2011
2012         * cgen-opc.c: #include <ctype.h>.
2013         (hash_keyword_name): New arg `case_sensitive_p'.  Callers updated.
2014         Handle case insensitive hashing.
2015         (hash_keyword_value): Change type of `value' to unsigned int.
2016
2017 Thu Jul 10 12:56:10 1997  Jeffrey A Law  (law@cygnus.com)
2018
2019         * mips-opc.c (mips_builtin_opcodes): If an insn uses single
2020         precision FP, mark it as such.  Likewise for double precision
2021         FP.  Mark ISA1 insns.  Consolidate duplicate opcodes where
2022         possible.
2023
2024 Wed Jun 25 15:25:57 1997  Felix Lee  <flee@cirdan.cygnus.com>
2025
2026         * ppc-opc.c (extract_nsi): make unsigned expression signed before
2027         negating it.
2028         (UNUSED): remove one level of parens, so MSVC doesn't choke on
2029         nesting depth when all the macros are expanded.
2030
2031 Tue Jun 17 17:02:17 1997  Ian Lance Taylor  <ian@cygnus.com>
2032
2033         * sparc-opc.c: The fcmp v9a instructions take an integer register
2034         as a destination, not a floating point register.  From Christian
2035         Kuehnke <Christian.Kuehnke@arbi.Informatik.Uni-Oldenburg.DE>.
2036
2037 Mon Jun 16 14:13:18 1997  Ian Lance Taylor  <ian@cygnus.com>
2038
2039         * m68k-dis.c (print_insn_arg): Print case 7.2 using %pc@()
2040         syntax.  From Roman Hodek
2041         <rnhodek@faui22c.informatik.uni-erlangen.de>.
2042
2043         * i386-dis.c (twobyte_has_modrm): Fix pand.
2044
2045 Mon Jun 16 14:08:38 1997  Michael Taylor  <mbt@mit.edu>
2046
2047         * i386-dis.c (dis386_twobyte): Fix pand and pandn.
2048
2049 Tue Jun 10 11:26:47 1997  H.J. Lu  <hjl@gnu.ai.mit.edu>
2050
2051         * arm-dis.c: Add prototypes for arm_decode_shift and
2052         print_insn_arm.
2053
2054 Mon Jun  2 11:39:04 1997  Gavin Koch  <gavin@cygnus.com>
2055
2056         * mips-opc.c: Add r3900 insns.
2057
2058 Tue May 27 15:55:44 1997  Ian Lance Taylor  <ian@cygnus.com>
2059
2060         * sh-dis.c (print_insn_shx): Change relmask to bfd_vma.  Don't
2061         print delay slot instructions on the same line.  When using a PC
2062         relative load, add a comment with the value being loaded if it can
2063         be obtained.
2064
2065 Tue May 27 11:02:08 1997  Alan Modra  <alan@spri.levels.unisa.edu.au>
2066
2067         * i386-dis.c (dis386[], dis386_twobyte[]): change pushl/popl
2068         to pushS/popS for segment regs and byte constant so that
2069         pushw/popw printed when in 16 bit data mode.
2070
2071         * i386-dis.c (dis386[]): change cwtl, cltd to cWtS, cStd to
2072         print cbtw, cwtd in 16 bit data mode.
2073         * i386-dis.c (putop): extra case W to support above.
2074
2075         * i386-dis.c (print_insn_x86): print addr32 prefix when given
2076         address size prefix in 16 bit address mode.
2077
2078 Fri May 23 16:47:23 1997  Ian Lance Taylor  <ian@cygnus.com>
2079
2080         * sh-dis.c: Reindent.  Rename local variable fprintf to
2081         fprintf_fn.
2082
2083 Thu May 22 14:06:02 1997  Doug Evans  <dje@canuck.cygnus.com>
2084
2085         * m32r-opc.c (m32r_cgen_insn_table, cmpui): Undo patch of May 2.
2086
2087 Tue May 20 11:26:27 1997  Gavin Koch  <gavin@cygnus.com>
2088
2089         * mips-opc.c (mips_builtin_opcodes): Moved INSN_ISA field into new
2090           field membership.
2091         * mips16-opc.c (mip16_opcodes): same.
2092
2093 Mon May 12 15:10:53 1997  Jim Wilson  <wilson@cygnus.com>
2094
2095         * m68k-opc.c (moveb): Change $d to %d.
2096
2097 Mon May  5 14:28:41 1997  Ian Lance Taylor  <ian@cygnus.com>
2098
2099         * i386-dis.c: (dis386_twobyte): Add MMX instructions.
2100         (twobyte_has_modrm): Likewise.
2101         (grps): Likewise.
2102         (OP_MMX, OP_EM, OP_MS): New static functions.
2103
2104         * i386-dis.c: Revert patch of April 4.  The output now matches
2105         what gcc generates.
2106
2107 Fri May  2 12:48:37 1997  Doug Evans  <dje@canuck.cygnus.com>
2108
2109         * m32r-opc.c (m32r_cgen_insn_table, cmpui): Use $uimm16 instead
2110         of $simm16.
2111
2112 Thu May  1 15:34:15 1997  Doug Evans  <dje@canuck.cygnus.com>
2113
2114         * m32r-opc.h (CGEN_ARCH): Renamed from CGEN_CPU.
2115
2116 Tue Apr 15 12:40:08 1997  Ian Lance Taylor  <ian@cygnus.com>
2117
2118         * Makefile.in (install): Depend upon installdirs.
2119         (installdirs): New target.
2120
2121 Mon Apr 14 12:13:51 1997  Ian Lance Taylor  <ian@cygnus.com>
2122
2123         From Thomas Graichen <graichen@rzpd.de>:
2124         * configure.in: Use ${CONFIG_SHELL} when running $ac_config_sub.
2125         * configure: Rebuild.
2126
2127 Sun Apr 13 17:50:41 1997  Doug Evans  <dje@canuck.cygnus.com>
2128
2129         * cgen-*.c, m32r-*.c: #include sysdep.h instead of config.h.
2130         Delete string{,s}.h support.
2131
2132 Thu Apr 10 14:44:56 1997  Doug Evans  <dje@canuck.cygnus.com>
2133
2134         * cgen-asm.c (cgen_parse_operand_fn): New global.
2135         (cgen_parse_{{,un}signed_integer,address}): Update call to
2136         cgen_parse_operand_fn.
2137         (cgen_init_parse_operand): New function.
2138         * m32r-asm.c (parse_insn_normal): cgen_init_parse_operand renamed
2139         from cgen_asm_init_parse.
2140         (m32r_cgen_assemble_insn): New operand `errmsg'.
2141         Delete call to as_bad, return error message to caller.
2142         (m32r_cgen_asm_hash_keywords): #if 0 out.
2143
2144 Wed Apr  9 12:05:25 1997  Andreas Schwab  <schwab@issan.informatik.uni-dortmund.de>
2145
2146         * m68k-dis.c (print_insn_arg) [case 'd']: Print as address register,
2147         not data register.
2148         [case 'J']: Fix typo in register name.
2149
2150 Mon Apr  7 16:48:22 1997  Ian Lance Taylor  <ian@cygnus.com>
2151
2152         * configure.in: Substitute SHLIB_LIBS.
2153         * configure: Rebuild.
2154         * Makefile.in (SHLIB_LIBS): New variable.
2155         ($(SHLIB)): Use $(SHLIB_LIBS).
2156
2157 Mon Apr  7 11:45:44 1997  Doug Evans  <dje@canuck.cygnus.com>
2158
2159         * cgen-dis.c (build_dis_hash_table): Fix xmalloc size computation.
2160
2161         * cgen-opc.c (hash_keyword_name): Improve algorithm.
2162
2163         * disassemble.c (disassembler): Handle m32r.
2164
2165 Fri Apr  4 12:29:38 1997  Doug Evans  <dje@canuck.cygnus.com>
2166
2167         * m32r-asm.c, m32r-dis.c, m32r-opc.c, m32r-opc.h: New files.
2168         * cgen-asm.c, cgen-dis.c, cgen-opc.c: New files.
2169         * Makefile.in (CFILES): Add them.
2170         (ALL_MACHINES): Add them.
2171         (dependencies): Regenerate.
2172         * configure.in (cgen_files): New variable.
2173         (bfd_m32r_arch): Add entry.
2174         * configure: Regenerate.
2175
2176 Fri Apr  4 14:04:16 1997  Ian Lance Taylor  <ian@cygnus.com>
2177
2178         * configure.in: Correct file names for bfd_mn10[23]00_arch.
2179         * configure: Rebuild.
2180
2181         * Makefile.in: Rebuild dependencies.
2182
2183         * d10v-dis.c: Include "ansidecl.h" before "opcode/d10v.h".
2184
2185         * i386-dis.c (float_reg): Swap fsubrp and fsubp.  Swap fdivrp and
2186         fdivp.
2187
2188 Thu Apr  3 13:22:45 1997  Ian Lance Taylor  <ian@cygnus.com>
2189
2190         * Branched binutils 2.8.
2191
2192 Wed Apr  2 12:23:53 1997  Ian Lance Taylor  <ian@cygnus.com>
2193
2194         * m10200-dis.c: Rename from mn10200-dis.c.
2195         * m10200-opc.c: Rename from mn10200-opc.c.
2196         * m10300-dis.c: Rename from mn10300-dis.c
2197         * m10300-opc.c: Rename from mn10300-opc.c.
2198         * Makefile.in: Update accordingly.
2199
2200         * mips16-opc.c: Add mul and dmul macros.
2201
2202 Tue Apr  1 16:27:45 1997  Klaus Kaempf  <kkaempf@progis.de>
2203
2204         * makefile.vms: Update CFLAGS, add clean target.
2205
2206 Fri Mar 28 12:10:09 1997  Ian Lance Taylor  <ian@cygnus.com>
2207
2208         * mips-opc.c: Add "wait".  From Ralf Baechle
2209         <ralf@gnu.ai.mit.edu>.
2210
2211         * configure.in: Add stdlib.h to AC_CHECK_HEADERS list.
2212         * configure, config.in: Rebuild.
2213         * sysdep.h: Include <stdlib.h> if it exists.
2214         * sparc-dis.c: Include <stdio.h> and "sysdep.h".  Don't include
2215         <string.h>.
2216         * Makefile.in: Rebuild dependencies.
2217
2218 Thu Mar 27 14:24:43 1997  Ian Lance Taylor  <ian@cygnus.com>
2219
2220         * ppc-opc.c: Add PPC 403 instructions and extended opcodes.  From
2221         Andrew Bray <andy@madhouse.demon.co.uk>.
2222
2223         * mips-opc.c: Add cast when setting mips_opcodes.
2224
2225 Tue Mar 25 23:04:00 1997  Stu Grossman  (grossman@critters.cygnus.com)
2226
2227         * v850-dis.c (disassemble):  Fix sign extension problem.
2228         * v850-opc.c (extract_d*):  Fix sign extension problems to make
2229         disassembly calculate branch offsets correctly.
2230
2231 Mon Mar 24 13:22:13 1997  Ian Lance Taylor  <ian@cygnus.com>
2232
2233         * sh-opc.h: Add bf/s and bt/s as synonyms for bf.s and bt.s.
2234
2235         * mips-opc.c: Add dctr and dctw.
2236
2237 Sun Mar 23 18:08:10 1997  Martin M. Hunt  <hunt@pizza.cygnus.com>
2238
2239         * d30v-dis.c (print_insn): Change the way signed constants
2240         are displayed.
2241
2242 Fri Mar 21 14:37:52 1997  Ian Lance Taylor  <ian@cygnus.com>
2243
2244         * Makefile.in (BFD_H): New variable.
2245         (HFILES): New variable.
2246         (CFILES): Add all C files.
2247         (.dep, .dep1, dep.sed, dep, dep-in): New targets.
2248         Delete old dependencies, and build new ones.
2249         * dep-in.sed: New file.
2250
2251 Thu Mar 20 19:03:30 1997  Philippe De Muyter  <phdm@info.ucl.ac.be>
2252
2253         * m68k-opc.c (m68k_opcode_aliases): Added blo and blo{s,b,w,l}.
2254
2255 Tue Mar 18 14:17:03 1997  Jeffrey A Law  (law@cygnus.com)
2256
2257         * mn10200-opc.c: Change "trap" to "syscall".
2258         * mn10300-opc.c: Add new "syscall" instruction.
2259
2260 Mon Mar 17 08:48:03 1997  J.T. Conklin  <jtc@beauty.cygnus.com>
2261
2262         * m68k-opc.c (m68k_opcodes): Provide correct entries for mulsl and
2263         mulul insns on the coldfire.
2264
2265 Sat Mar 15 17:13:05 1997  Ian Lance Taylor  <ian@cygnus.com>
2266
2267         * arm-dis.c (print_insn_arm): Don't print instruction bytes.
2268         (print_insn_big_arm): Set bytes_per_chunk and display_endian.
2269         (print_insn_little_arm): Likewise.
2270
2271 Fri Mar 14 15:08:59 1997  Ian Lance Taylor  <ian@cygnus.com>
2272
2273         Based on patches from H.J. Lu <hjl@lucon.org>:
2274         * i386-dis.c (fetch_data): Add prototype.
2275         * m68k-dis.c (fetch_data): Add prototype.
2276         (dummy_print_address): Add prototype.  Make static.
2277         * ppc-opc.c (valid_bo): Add prototype.
2278         * sparc-dis.c (build_hash_table): Add prototype.
2279         (is_delayed_branch, compute_arch_mask): Add prototypes.
2280         (print_insn_sparc): Make several local variables const.
2281         (compare_opcodes): Change arguments to const PTR.  Add prototype.
2282         * sparc-opc.c (arg): Change name field to be const.
2283         (lookup_name, lookup_value): Add prototypes.  Change table and
2284         name parameters to be const.
2285         (sparc_encode_asi): Change name parameter to be const.
2286         (sparc_encode_membar, sparc_encode_prefetch): Likewise.
2287         (sparc_encode_sparclet_cpreg): Likewise.
2288         (sparc_decode_asi): Change return type to be const.
2289         (sparc_decode_membar, sparc_decode_prefetch): Likewise.
2290         (sparc_decode_sparclet_cpreg): Likewise.
2291
2292 Fri Mar  7 10:51:49 1997  Ian Lance Taylor  <ian@cygnus.com>
2293
2294         * Makefile.in ($(SHLINK)): Just use ln -s, not ln -sf, since
2295         Solaris doesn't like the combined options, and the -f is
2296         unnecessary.
2297         (stamp-tshlink, install): Likewise.
2298
2299 Thu Mar  6 16:51:11 1997  Jeffrey A Law  (law@cygnus.com)
2300
2301         * mn10300-opc.c (IMM16_PCREL, SD8N_PCREL, D16_SHIFT): Mark these
2302         as relaxable.
2303
2304 Tue Mar  4 06:10:36 1997  J.T. Conklin  <jtc@cygnus.com>
2305
2306         * m68k-opc.c (m68k_opcodes): Fix last change for the mc68010.
2307
2308 Mon Mar  3 07:45:20 1997  J.T. Conklin  <jtc@cygnus.com>
2309
2310         * m68k-opc.c (m68k_opcodes): Added entries for the tst insns on
2311         the mc68000.
2312
2313 Thu Feb 27 14:04:32 1997  Philippe De Muyter  <phdm@info.ucl.ac.be>
2314
2315         * m68k-opc.c (m68k_opcodes): Added swbegl pseudo-instruction.
2316
2317 Thu Feb 27 11:36:41 1997  Michael Meissner  <meissner@cygnus.com>
2318
2319         * tic80-dis.c (print_insn_tic80): Set info->bytes_per_line to 8.
2320
2321 Wed Feb 26 15:34:48 1997  Michael Meissner  <meissner@cygnus.com>
2322
2323         * tic80-opc.c (tic80_predefined_symbols): Define r25 properly.
2324
2325 Wed Feb 26 13:38:30 1997  Andreas Schwab  <schwab@issan.informatik.uni-dortmund.de>
2326
2327         * m68k-dis.c (NEXTSINGLE, NEXTDOUBLE, NEXTEXTEND): Use
2328         floatformat_to_double to make portable.
2329         (print_insn_arg): Use NEXTEXTEND macro when extracting extended
2330         precision float.
2331
2332 Mon Feb 24 19:26:12 1997  Dawn Perchik  <dawn@cygnus.com>
2333
2334         * mips-opc.c: Initialize mips_opcodes to mips_builtin_opcodes,
2335         and bfd_mips_num_opcodes to bfd_mips_num_builtin_opcodes.
2336
2337 Mon Feb 24 15:19:01 1997  Martin M. Hunt  <hunt@pizza.cygnus.com>
2338
2339         * d10v-dis.c, d10v-opc.c: Change pre_defined_registers to
2340         d10v_predefined_registers and reg_name_cnt to d10v_reg_name_cnt.
2341
2342 Mon Feb 24 14:33:26 1997  Fred Fish  <fnf@cygnus.com>
2343
2344         * tic80-opc.c (LSI_SCALED): Renamed from this ...
2345         (OFF_SL_BR_SCALED): ... to this, and added the flag
2346         TIC80_OPERAND_BASEREL to the flags word.
2347         (tic80_opcodes): Replace all occurances of LSI_SCALED with
2348         OFF_SL_BR_SCALED.
2349
2350 Sat Feb 22 21:25:00 1997  Dawn Perchik  <dawn@cygnus.com>
2351
2352         * mips-opc.c: Add macros for cop0, cop1 cop2 and cop3.
2353         Change mips_opcodes from const array to a pointer,
2354         and change bfd_mips_num_opcodes from const int to int,
2355         so that we can increase the size of the mips opcodes table
2356         dynamically.
2357
2358 Sat Feb 22 21:03:47 1997  Fred Fish  <fnf@cygnus.com>
2359
2360         * tic80-opc.c (tic80_predefined_symbols): Revert change to
2361         store BITNUM values in the table in one's complement form
2362         to match behavior when assembler is given a raw numeric
2363         value for a BITNUM operand.
2364         * tic80-dis.c (print_operand_bitnum): Ditto.
2365
2366 Fri Feb 21 16:31:18 1997  Martin M. Hunt  <hunt@pizza.cygnus.com>
2367
2368         * d30v-opc.c: Removed references to FLAG_X.
2369
2370 Wed Feb 19 14:51:20 1997  Ian Lance Taylor  <ian@cygnus.com>
2371
2372         * Makefile.in: Add dependencies on ../bfd/bfd.h as required.
2373
2374 Tue Feb 18 17:43:43 1997  Martin M. Hunt  <hunt@pizza.cygnus.com>
2375
2376         * Makefile.in: Added d30v object files.
2377         * configure: (bfd_d30v_arch) Rebuilt.
2378         * configure.in: (bfd_d30v_arch) Added new case.
2379         * d30v-dis.c: New file.
2380         * d30v-opc.c: New file.
2381         * disassemble.c (disassembler) Add entry for d30v.
2382
2383 Tue Feb 18 16:32:08 1997  Fred Fish  <fnf@cygnus.com>
2384
2385         * tic80-opc.c (tic80_predefined_symbols): Add symbolic
2386         representations for the floating point BITNUM values.
2387
2388 Fri Feb 14 12:14:05 1997  Fred Fish  <fnf@cygnus.com>
2389
2390         * tic80-opc.c (tic80_predefined_symbols): Store BITNUM values
2391         in the table in one's complement form, as they appear in the
2392         actual instruction.
2393         (tic80_symbol_to_value): Use macros to access predefined
2394         symbol fields.
2395         (tic80_value_to_symbol): Ditto.
2396         (tic80_next_predefined_symbol): New function.
2397         * tic80-dis.c (print_operand_bitnum): Remove code that did
2398         one's complement for BITNUM values.
2399
2400 Thu Feb 13 21:56:51 1997  Klaus Kaempf  <kkaempf@progis.de>
2401
2402         * makefile.vms: Remove 8 bit characters.  Update to latest
2403         gcc release.
2404
2405 Thu Feb 13 20:41:22 1997  Philippe De Muyter  <phdm@info.ucl.ac.be>
2406
2407         * m68k-opc.c (m68k_opcodes): Add swbeg pseudo-instruction.
2408
2409 Thu Feb 13 16:30:02 1997  Jeffrey A Law  (law@cygnus.com)
2410
2411         * mn10200-opc.c (IMM16_PCREL): This is a signed operand.
2412         (IMM24_PCREL): Likewise.
2413
2414 Thu Feb 13 13:28:43 1997  Ian Lance Taylor  <ian@cygnus.com>
2415
2416         * mips-dis.c (print_mips16_insn_arg): Use memaddr - 2 as the base
2417         address for an extended PC relative instruction that is not a
2418         branch.
2419
2420 Wed Feb 12 12:27:40 1997  Andreas Schwab  <schwab@issan.informatik.uni-dortmund.de>
2421
2422         * m68k-dis.c (print_insn_m68k): Set bytes_per_chunk and
2423         bytes_per_line.
2424
2425 Tue Feb 11 16:36:31 1997  Fred Fish  <fnf@cygnus.com>
2426
2427         * tic80-opc.c (tic80_operands): Fix typo '+' -> '|'.
2428         (tic80_opcodes): Sort entries so that long immediate forms
2429         come after short immediate forms, making it easier for
2430         assembler to select the right one for a given operand.
2431
2432 Tue Feb 11 15:26:47 1997  Ian Lance Taylor  <ian@cygnus.com>
2433
2434         * mips-dis.c (_print_insn_mips): Set bytes_per_chunk and
2435         display_endian.
2436         (print_insn_mips16): Likewise.
2437
2438 Mon Feb 10 10:12:41 1997  Fred Fish  <fnf@cygnus.com>
2439
2440         * tic80-opc.c (tic80_symbol_to_value): Changed to accept
2441         a symbol class that restricts translation to just that
2442         class (general register, condition code, etc).
2443
2444 Thu Feb  6 17:34:09 1997  Fred Fish  <fnf@cygnus.com>
2445
2446         * tic80-opc.c (tic80_operands): Add REG_0_E, REG_22_E,
2447         and REG_DEST_E for register operands that have to be
2448         an even numbered register.  Add REG_FPA for operands that
2449         are one of the floating point accumulator registers.
2450         Add TIC80_OPERAND_MASK to flags for ENDMASK operand.
2451         (tic80_opcodes): Change entries that need even numbered
2452         register operands to use the new operand table entries.
2453         Add "or" entries that are identical to "or.tt" entries.
2454
2455 Wed Feb  5 11:12:44 1997  Ian Lance Taylor  <ian@cygnus.com>
2456
2457         * mips16-opc.c: Add new cases of exit instruction for
2458         disassembler.
2459         * mips-dis.c (print_mips16_insn_arg): Display floating point
2460         registers in operands of exit instruction.  Print `$' before
2461         register names in operands of entry and exit instructions.
2462
2463 Thu Jan 30 14:09:03 1997  Fred Fish  <fnf@cygnus.com>
2464
2465         * tic80-opc.c (tic80_predefined_symbols): Table of name/value
2466         pairs for all predefined symbols recognized by the assembler.
2467         Also used by the disassembling routines.
2468         (tic80_symbol_to_value): New function.
2469         (tic80_value_to_symbol): New function.
2470         * tic80-dis.c (print_operand_control_register,
2471         print_operand_condition_code, print_operand_bitnum):
2472         Remove private tables and use tic80_value_to_symbol function.
2473
2474 Thu Jan 30 11:30:45 1997  Martin M. Hunt  <hunt@pizza.cygnus.com>
2475
2476         * d10v-dis.c (print_operand): Change address printing
2477         to correctly handle PC wrapping.  Fixes PR11490.
2478
2479 Wed Jan 29 09:39:17 1997  Jeffrey A Law  (law@cygnus.com)
2480
2481         * mn10200-opc.c (mn10200_operands): Make 8 and 16 bit pc-relative
2482         branches relaxable.
2483
2484 Tue Jan 28 15:57:34 1997  Ian Lance Taylor  <ian@cygnus.com>
2485
2486         * mips-dis.c (print_insn_mips16): Set insn_info information.
2487         (print_mips16_insn_arg): Likewise.
2488
2489         * mips-dis.c (print_insn_mips16): Better handling of an extend
2490         opcode followed by an instruction which can not be extended.
2491
2492 Fri Jan 24 12:08:21 1997  J.T. Conklin  <jtc@cygnus.com>
2493
2494         * m68k-opc.c (m68k_opcodes): Changed operand specifier for the
2495         coldfire moveb instruction to not allow an address register as
2496         destination.  Although the documentation does not indicate that
2497         this is invalid, experiments uncovered unexpected behavior.
2498         Added a comment explaining the situation.  Thanks to Andreas
2499         Schwab for pointing this out to me.
2500
2501 Wed Jan 22 20:13:51 1997  Fred Fish  <fnf@cygnus.com>
2502
2503         * tic80-opc.c (tic80_opcodes): Expand comment to note that the
2504         entries are presorted so that entries with the same mnemonic are
2505         adjacent to each other in the table.  Sort the entries for each
2506         instruction so that this is true.
2507
2508 Mon Jan 20 12:48:57 1997  Andreas Schwab  <schwab@issan.informatik.uni-dortmund.de>
2509
2510         * m68k-dis.c: Include <libiberty.h>.
2511         (print_insn_m68k): Sort the opcode table on the most significant
2512         nibble of the opcode.
2513
2514 Sat Jan 18 15:15:05 1997  Fred Fish  <fnf@cygnus.com>
2515
2516         * tic80-dis.c (tic80_opcodes): Add "wrcr", "vmpy", "vrnd",
2517         "vsub", "vst", "xnor", and "xor" instructions.
2518         (V_a1): Renamed from V_a, msb of accumulator reg number.
2519         (V_a0): Add macro, lsb of accumulator reg number.
2520
2521 Fri Jan 17 18:24:31 1997  Fred Fish  <fnf@cygnus.com>
2522
2523         * tic80-dis.c (print_insn_tic80): Broke excessively long
2524         function up into several smaller ones and arranged for
2525         the instruction printing function to be callable recursively
2526         to print vector instructions that have both a load and a
2527         math instruction packed into a single opcode.
2528         * tic80-opc.c (tic80_opcodes): Expand comment for vld opcode
2529         to explain why it comes after the other vector opcodes.
2530
2531 Fri Jan 17 16:19:15 1997  J.T. Conklin  <jtc@beauty.cygnus.com>
2532
2533         * m68k-opc.c (m68k_opcodes): add b, w, or l specifier to coldfire
2534         move insns to handle immediate operands.
2535
2536 Thu Jan 17 16:19:00 1997  Andreas Schwab  <schwab@issan.informatik.uni-dortmund.de>
2537
2538         * m68k-opc.c (m68k_opcodes): Delete duplicate entry for "cmpil".
2539         fix operand mask in the "moveml" entries for the coldfire.
2540
2541 Thu Jan 16 20:54:40 1997  Fred Fish  <fnf@cygnus.com>
2542
2543         * tic80-opc.c (V_a, V_m, V_S, V_Z, V_p, OP_V, MASK_V):
2544         New macros for building vector instruction opcodes.
2545         (tic80_opcodes): Remove all uses of FMT_SI, FMT_REG, and
2546         FMT_LI, which were unused.  The field is now a flags field.
2547         Remove some opcodes that are possible, but illegal, such
2548         as long immediate instructions with doubles for immediate
2549         values.  Add "vadd" and "vld" instructions.
2550
2551 Wed Jan 15 18:59:51 1997  Fred Fish  <fnf@cygnus.com>
2552
2553         * tic80-opc.c (tic80_operands): Reorder some table entries to make
2554         the order more logical.  Move the shift alias instructions ("rotl",
2555         "shl", "ins", "rotr", "extu", "exts", "srl", and "sra" to be
2556         interspersed with the regular sr.x and sl.x instructions.  Add
2557         and test new instruction opcodes for "sl", "sli", "sr", "sri", "st",
2558         "sub", "subu", "swcr", and "trap".
2559
2560 Tue Jan 14 19:42:50 1997  Fred Fish  <fnf@cygnus.com>
2561
2562         * tic80-opc.c (OFF_SS_PC): Renamed from OFF_SS.
2563         (OFF_SL_PC): Renamed from OFF_SL.
2564         (OFF_SS_BR): New operand type for base relative operand.
2565         (OFF_SL_BR): New operand type for base relative operand.
2566         (REG_BASE): New operand type for base register operand.
2567         (tic80_opcodes): Add and test "fmpy", "frndm", "frndn", "frndp",
2568         "frndz", "fsqrt", "fsub", "illop0", "illopF", "ins", "jsr",
2569         "ld", "ld.u", "lmo", "or", "rdcr", "rmo", "rotl", and "rotr"
2570         instructions.
2571         * tic80-dis.c (print_insn_tic80): Print opcode name with fixed width
2572         10 char field, padded with spaces on rhs, rather than a string
2573         followed by a tab.  Use renamed TIC80_OPERAND_PCREL flag bit rather
2574         than old TIC80_OPERAND_RELATIVE.  Add support for new
2575         TIC80_OPERAND_BASEREL flag bit.
2576
2577 Mon Jan 13 15:58:56 1997  Fred Fish  <fnf@cygnus.com>
2578
2579         * tic80-dis.c (print_insn_tic80): Print floating point operands
2580         as floats.
2581         * tic80-opc.c (SPFI): Add single precision floating point
2582         immediate operand type.
2583         (ROTATE): Add rotate operand type for shifts.
2584         (ENDMASK): Add for shifts.
2585         (n): Macro for the 'n' bit.
2586         (i): Macro for the 'i' bit.
2587         (PD): Macro for the 'PD' field.
2588         (P2): Macro for the 'P2' field.
2589         (P1): Macro for the 'P1' field.
2590         (tic80_opcodes): Add entries for "exts", "extu", "fadd",
2591         "fcmp", and "fdiv".
2592
2593 Mon Jan  6 15:06:55 1997  Jeffrey A Law  (law@cygnus.com)
2594
2595         * mn10200-dis.c (disassemble): Mask off unwanted bits after
2596         adding in current address for pc-relative operands.
2597
2598 Mon Jan  6 10:56:25 1997  Fred Fish  <fnf@cygnus.com>
2599
2600         * tic80-dis.c (R_SCALED): Add macro to test for ":s" modifier bit.
2601         (print_insn_tic80): If R_SCALED then print ":s" modifier for operand.
2602         * tic80-opc.c (REG0, REG22, REG27, SSOFF, LSOFF): Names
2603         changed to REG_0, REG_22, REG_DEST, OFF_SS, OFF_SL respectively.
2604         (SICR, LICR, REGM_SI, REGM_LI): Names changed to CR_SI, CR_LI,
2605         REG_BASE_M_SI, REG_BASE_M_LI respectively.
2606         (REG_SCALED, LSI_SCALED): New operand types.
2607         (E): New macro for 'E' bit at bit 27.
2608         (tic80_opcodes): Add and test dld, dld.u, dst, estop, and etrap
2609         opcodes, including the various size flavors (b,h,w,d) for
2610         the direct load and store instructions.
2611
2612 Sun Jan  5 12:18:14 1997  Fred Fish  <fnf@cygnus.com>
2613
2614         * tic80-dis.c (M_SI, M_LI): Add macros to test for ":m" modifier bit
2615         in an instruction.
2616         * tic80-dis.c (print_insn_tic80): Change comma and paren handling.
2617         Use M_SI and M_LI macros to check for ":m" modifier for GPR operands.
2618         * tic80-opc.c (tic80_operands): Add REGM_SI and REGM_LI operands.
2619         (F, M_REG, M_LI, M_SI, SZ_REG, SZ_LI, SZ_SI, D, S): New bit-twiddlers.
2620         (MASK_LI_M, MASK_SI_M, MASK_REG_M): Remove and replace in opcode
2621         masks with "MASK_* & ~M_*" to get the M bit reset.
2622         (tic80_opcodes): Add bsr, bsr.a, cmnd, cmp, dcachec, and dcachef.
2623
2624 Sat Jan  4 19:05:05 1997  Fred Fish  <fnf@cygnus.com>
2625
2626         * tic80-dis.c (print_insn_tic80): Print TIC80_OPERAND_RELATIVE
2627         correctly.  Add support for printing TIC80_OPERAND_BITNUM and
2628         TIC80_OPERAND_CC, and TIC80_OPERAND_CR operands in symbolic
2629         form.
2630         * tic80-opc.c (tic80_operands): Add SSOFF, LSOFF, BITNUM,
2631         CC, SICR, and LICR table entries.
2632         (tic80_opcodes): Add and test "nop", "br", "bbo", "bbz",
2633         "bcnd", and "brcr" opcodes.
2634
2635 Fri Jan  3 18:32:11 1997  Fred Fish  <fnf@cygnus.com>
2636
2637         * ppc-opc.c (powerpc_operands): Make comment match the
2638         actual fields (no shift field).
2639         * sparc-opc.c (sparc_opcodes): Document why this cannot be "const".
2640         * tic80-dis.c (print_insn_tic80): Replace abort stub with a
2641         partial implementation, work in progress.
2642         * tic80-opc.c (tic80_operands): Begin construction operands table.
2643         (tic80_opcodes): Continue populating opcodes table and start
2644         filling in the operand indices.
2645         (tic80_num_opcodes): Add this.
2646
2647 Fri Jan  3 12:13:52 1997  Ian Lance Taylor  <ian@cygnus.com>
2648
2649         * m68k-opc.c: Add #B case for moveq.
2650
2651 Thu Jan  2 12:14:29 1997  Jeffrey A Law  (law@cygnus.com)
2652
2653         * mn10300-dis.c (disassemble): Make sure all variables are initialized
2654         before they are used.
2655
2656 Tue Dec 31 12:20:38 1996  Jeffrey A Law  (law@cygnus.com)
2657
2658         * v850-opc.c (v850_opcodes): Put curly-braces around operands
2659         for "breakpoint" instruction.
2660
2661 Tue Dec 31 15:38:13 1996  Ian Lance Taylor  <ian@cygnus.com>
2662
2663         * Makefile.in (ALL_CFLAGS): Add -D_GNU_SOURCE.
2664         (dep): Use ALL_CFLAGS rather than CFLAGS.
2665
2666 Tue Dec 31 15:09:16 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
2667
2668         * v850-opc.c (D8_{6,7}): Set V850_OPERAND_ADJUST_SHORT_MEMORY
2669         flag.
2670
2671 Mon Dec 30 17:02:11 1996  Fred Fish  <fnf@cygnus.com>
2672
2673         * Makefile.in (m68k-opc.o, alpha-opc.o): Remove dis-asm.h dependency.
2674         (tic80-dis.o, tic80-opc.o): Add rules per comment in Makefile.in.
2675
2676 Mon Dec 30 11:38:01 1996  Ian Lance Taylor  <ian@cygnus.com>
2677
2678         * mips16-opc.c: Add "abs".
2679
2680 Sun Dec 29 10:58:22 1996  Fred Fish  <fnf@cygnus.com>
2681
2682         * Makefile.in (ALL_MACHINES): Add tic80-dis.o and tic80-opc.o.
2683         * disassemble.c (ARCH_tic80): Define if ARCH_all is defined.
2684         (disassembler): Add bfd_arch_tic80 support to set disassemble
2685         to print_insn_tic80.
2686         * tic80-dis.c (print_insn_tic80): Add stub.
2687
2688 Fri Dec 27 22:30:57 1996  Fred Fish  <fnf@cygnus.com>
2689
2690         * configure.in (arch in $selarchs): Add bfd_tic80_arch entry.
2691         * configure: Regenerate with autoconf.
2692         * tic80-dis.c: Add file.
2693         * tic80-opc.c: Add file.
2694
2695 Fri Dec 20 14:30:19 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
2696
2697         * d10v-opc.c (pre_defined_registers):  Add cr[0-15], dpc, dpsw, link.
2698
2699 Mon Dec 16 13:00:15 1996  Jeffrey A Law  (law@cygnus.com)
2700
2701         * mn10200-opc.c (mn10200_operands): Add SIMM16N.
2702         (mn10200_opcodes): Use it for some logicals and btst insns.
2703         Add "break" and "trap" instructions.
2704
2705         * mn10300-opc.c (mn10300_opcodes): Add "break" instruction.
2706
2707         * mn10200-opc.c: Add pseudo-ops for "mov (an),am" and "mov an,(am)".
2708
2709 Sat Dec 14 22:36:20 1996  Ian Lance Taylor  <ian@cygnus.com>
2710
2711         * mips-dis.c (print_mips16_insn_arg): The base address of a PC
2712         relative load or add now depends upon whether the instruction is
2713         in a delay slot.
2714
2715 Wed Dec 11 09:23:46 1996  Jeffrey A Law  (law@cygnus.com)
2716
2717         * mn10200-dis.c: Finish writing disassembler.
2718         * mn10200-opc.c (mn10200_opcodes): Fix mask for "mov imm8,dn".
2719         Fix mask for "jmp (an)".
2720
2721         * mn10300-dis.c (disassemble, print_insn_mn10300): Corrently
2722         handle endianness issues for mn10300.
2723
2724         * mn10200-opc.c (mn10200_opcodes): Fix operands for "movb dm,(an)".
2725
2726 Tue Dec 10 12:08:05 1996  Jeffrey A Law  (law@cygnus.com)
2727
2728         * mn10200-opc.c (mn10200_opcodes): "mov imm8,d0" is a format 2
2729         instruction.  Fix opcode field for "movb (imm24),dn".
2730
2731         * mn10200-opc.c (mn10200_operands): Fix insertion position
2732         for DI operand.
2733
2734 Mon Dec  9 16:42:43 1996  Jeffrey A Law  (law@cygnus.com)
2735
2736         * mn10200-opc.c: Create mn10200 opcode table.
2737         * mn10200-dis.c: Flesh out mn10200 disassembler.  Not ready,
2738         but moving along nicely.
2739
2740 Sun Dec  8 04:28:31 1996  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
2741
2742         * Makefile.in (ALL_MACHINES):  Add mips16-opc.o.
2743
2744 Fri Dec  6 16:47:40 1996  J.T. Conklin  <jtc@rhino.cygnus.com>
2745
2746         * m68k-opc.c (m68k_opcodes): Revert change to use < and >
2747         specifiers for fmovem* instructions.
2748
2749 Fri Dec  6 14:48:09 1996  Jeffrey A Law  (law@cygnus.com)
2750
2751         * mn10300-dis.c (disassemble): Remove '$' register prefixing.
2752
2753 Fri Dec  6 17:34:39 1996  Ian Lance Taylor  <ian@cygnus.com>
2754
2755         * mips16-opc.c: Change opcode for entry/exit to avoid conflicting
2756         with dsrl.
2757
2758 Fri Dec  6 14:48:09 1996  Jeffrey A Law  (law@cygnus.com)
2759
2760         * mn10300-opc.c: Add some comments explaining the various
2761         operands and such.
2762
2763         * mn10300-dis.c (disassemble): Fix minor gcc -Wall warnings.
2764
2765 Thu Dec  5 12:09:48 1996  J.T. Conklin  <jtc@rtl.cygnus.com>
2766
2767         * m68k-dis.c (print_insn_arg): Handle new < and > operand
2768         specifiers.
2769
2770         * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
2771         operand specifiers in fmovm* instructions.
2772
2773 Wed Dec  4 14:52:18 1996  Ian Lance Taylor  <ian@cygnus.com>
2774
2775         * ppc-opc.c (insert_li): Give an error if the offset has the two
2776         least significant bits set.
2777
2778 Wed Nov 27 13:09:01 1996  Ian Lance Taylor  <ian@cygnus.com>
2779
2780         * mips-dis.c (print_insn_mips16): Separate the instruction from
2781         the arguments with a tab, not a space.
2782
2783 Tue Nov 26 13:24:17 1996  Jeffrey A Law  (law@cygnus.com)
2784
2785         * mn10300-dis.c (disasemble): Finish conversion to '$' as
2786         register prefix.
2787
2788         * mn10300-opc.c (mn10300_opcodes): Fix mask field for
2789         mov am,(imm32,sp).
2790
2791 Tue Nov 26 10:53:21 1996  Ian Lance Taylor  <ian@cygnus.com>
2792
2793         * configure: Rebuild with autoconf 2.12.
2794
2795         Add support for mips16 (16 bit MIPS implementation):
2796         * mips16-opc.c: New file.
2797         * mips-dis.c: Include "elf-bfd.h" and "elf/mips.h".
2798         (mips16_reg_names): New static array.
2799         (print_insn_big_mips): Use print_insn_mips16 in 16 bit mode or
2800         after seeing a 16 bit symbol.
2801         (print_insn_little_mips): Likewise.
2802         (print_insn_mips16): New static function.
2803         (print_mips16_insn_arg): New static function.
2804         * mips-opc.c: Add jalx instruction.
2805         * Makefile.in (mips16-opc.o): New target.
2806         * configure.in: Use mips16-opc.o for bfd_mips_arch.
2807         * configure: Rebuild.
2808
2809 Mon Nov 25 16:15:17 1996  J.T. Conklin  <jtc@cygnus.com>
2810
2811         * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
2812         operand specifiers in *save, *restore and movem* instructions.
2813
2814         * m68k-opc.c (m68k_opcodes): Fix move and movem instructions for
2815         the coldfire.
2816
2817         * m68k-opc.c (m68k_opcodes): The coldfire (mcf5200) can only use
2818         register operands for immediate arithmetic, not, neg, negx, and
2819         set according to condition instructions.
2820
2821         * m68k-opc.c (m68k_opcodes): Consistantly Use "s" as the storage
2822         specifier of the effective-address operand in immediate forms of
2823         arithmetic instructions.  The specifier for the immediate operand
2824         notes how and where the constant will be stored.
2825
2826 Mon Nov 25 11:17:01 1996  Jeffrey A Law  (law@cygnus.com)
2827
2828         * mn10300-opc.c (mn10300_opcodes): Remove redundant "lcc"
2829         opcode.
2830
2831         * mn10300-dis.c (disassemble): Use '$' instead of '%' for
2832         register prefix.
2833
2834         * mn10300-dis.c (disassemble): Prefix registers with '%'.
2835
2836 Wed Nov 20 10:37:13 1996  Jeffrey A Law  (law@cygnus.com)
2837
2838         * mn10300-dis.c (disassemble): Handle register lists.
2839
2840         * mn10300-opc.c: Fix handling of register list operand for
2841         "call", "ret", and "rets" instructions.
2842
2843         * mn10300-dis.c (disassemble): Print PC-relative and memory
2844         addresses symbolically if possible.
2845         * mn10300-opc.c: Distinguish between absolute memory addresses,
2846         pc-relative offsets & random immediates.
2847
2848         * mn10300-dis.c (print_insn_mn10300): Fix fetch of last byte
2849         in 7 byte insns.
2850         (disassemble): Handle SPLIT and EXTENDED operands.
2851
2852 Tue Nov 19 13:33:01 1996  Jeffrey A Law  (law@cygnus.com)
2853
2854         * mn10300-dis.c: Rough cut at printing some operands.
2855
2856         * mn10300-dis.c: Start working on disassembler support.
2857         * mn10300-opc.c (mn10300_opcodes): Fix masks on several insns.
2858
2859         * mn10300-opc.c (mn10300_operands): Add "REGS" for a register
2860         list.
2861         (mn10300_opcodes): Use REGS for register list in "movm" instructions.
2862
2863 Mon Nov 18 15:20:35 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
2864
2865         * d10v-opc.c (d10v_opcodes): Add3 sets the carry.
2866
2867 Fri Nov 15 13:43:19 1996  Jeffrey A Law  (law@cygnus.com)
2868
2869         * mn10300-opc.c (mn10300_opcodes): Demand parens around
2870         register argument is calls and jmp instructions.
2871
2872 Thu Nov  7 00:26:05 1996  Jeffrey A Law  (law@cygnus.com)
2873
2874         * mn10300-opc.c (mn10300_opcodes): Use DN01 for putx and
2875         getx operand.  Fix opcode for mulqu imm,dn.
2876
2877 Wed Nov  6 13:42:32 1996  Jeffrey A Law  (law@cygnus.com)
2878
2879         * mn10300-opc.c (mn10300_operands): Hijack "bits" field
2880         in MN10300_OPERAND_SPLIT operands for how many bits
2881         appear in the basic insn word.  Add IMM32_HIGH24,
2882         IMM32_HIGH24_LOWSHIFT8, IMM8E_SHIFT8.
2883         (mn10300_opcodes): Use new operands as needed.
2884
2885         * mn10300-opc.c (mn10300_operands): Add IMM32_LOWSHIFT8
2886         for bset, bclr, btst instructions.
2887         (mn10300_opcodes): Use new IMM32_LOWSHIFT8 as needed.
2888
2889         * mn10300-opc.c (mn10300_operands): Remove many redundant
2890         operands.  Update opcode table as appropriate.
2891         (IMM32): Add MN10300_OPERAND_SPLIT flag.
2892         (mn10300_opcodes): Fix single bit error in mov imm32,dn insn.
2893
2894 Tue Nov  5 13:26:58 1996  Jeffrey A Law  (law@cygnus.com)
2895
2896         * mn10300-opc.c (mn10300_operands): Add DN2, DM2, AN2, AM2
2897         operands (for indexed load/stores).  Fix bitpos for DI
2898         operand.  Add SN8N_SHIFT8, IMM8_SHIFT8, and D16_SHIFT for the
2899         few instructions that insert immediates/displacements in the
2900         middle of the instruction.  Add IMM8E for 8 bit immediate in
2901         the extended part of an instruction.
2902         (mn10300_operands): Use new opcodes as appropriate.
2903
2904 Tue Nov  5 10:30:51 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
2905
2906         * d10v-opc.c (d10v_opcodes): Declare the trap instruction
2907         sequential so the assembler never parallelizes it with
2908         other instructions.
2909
2910 Mon Nov  4 12:50:40 1996  Jeffrey A Law  (law@cygnus.com)
2911
2912         * mn10300-opc.c (mn10300_operands): Add DN01 and AN01 for
2913         a data/address register that appears in register field 0
2914         and register field 1.
2915         (mn10300_opcodes): Use DN01 and AN01 for mov/cmp imm8,DN/AN
2916
2917 Fri Nov  1 10:29:11 1996  Richard Henderson  <rth@tamu.edu>
2918
2919         * alpha-dis.c (print_insn_alpha): Use new NOPAL mask for
2920         standard disassembly.
2921
2922         * alpha-opc.c (alpha_operands): Rearrange flags slot.
2923         (alpha_opcodes): Add new BWX, CIX, and MAX instructions.
2924         Recategorize PALcode instructions.
2925
2926 Wed Oct 30 16:46:58 1996  Jeffrey A Law  (law@cygnus.com)
2927
2928         * v850-opc.c (v850_opcodes): Add relaxing "jbr".
2929
2930 Tue Oct 29 16:30:28 1996  Ian Lance Taylor  <ian@cygnus.com>
2931
2932         * mips-dis.c (_print_insn_mips): Don't print a trailing tab if
2933         there are no operand types.
2934
2935 Tue Oct 29 12:22:21 1996  Jeffrey A Law  (law@cygnus.com)
2936
2937         * v850-opc.c (D9_RELAX): Renamed from D9, all references
2938         changed.
2939         (v850_operands): Make sure D22 immediately follows D9_RELAX.
2940
2941 Fri Oct 25 12:12:53 1996  Ian Lance Taylor  <ian@cygnus.com>
2942
2943         * i386-dis.c (print_insn_x86): Set info->bytes_per_line to 5.
2944
2945 Thu Oct 24 17:53:52 1996  Jeffrey A Law  (law@cygnus.com)
2946
2947         * v850-opc.c (insert_d8_6): Fix operand insertion for sld.w
2948         and sst.w instructions.
2949
2950         * v850-opc.c (v850_opcodes): Add "jCC" instructions (aliases for
2951         "bCC"instructions).
2952
2953 Thu Oct 24 17:21:20 1996  Ian Lance Taylor  <ian@cygnus.com>
2954
2955         * mips-dis.c (_print_insn_mips): Use a tab between the instruction
2956         and the arguments.
2957
2958 Tue Oct 22 23:32:56 1996  Ian Lance Taylor  <ian@cygnus.com>
2959
2960         * ppc-opc.c (PPCPWR2): Define.
2961         (powerpc_opcodes): Use PPCPWR2 for fsqrt, rather than duplicating
2962         it.
2963
2964 Fri Oct 11 16:03:49 1996  Jeffrey A Law  (law@cygnus.com)
2965
2966         * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode
2967         field for movhu instruction.
2968
2969         * v850-dis.c (disassemble): For V850_OPERAND_SIGNED operands,
2970         cast value to "long" not "signed long" to keep hpux10
2971         compiler quiet.
2972
2973 Thu Oct 10 10:25:58 1996  Jeffrey A Law  (law@cygnus.com)
2974
2975         * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode field
2976         for mov (abs16),DN.
2977
2978         * mn10300-opc.c (FMT*): Remove definitions.
2979
2980         * mn10300-opc.c (mn10300_opcodes): Fix destination register
2981         for shift-by-register opcodes.
2982
2983         * mn10300-opc.c (mn10300_operands): Break DN, DM, AN, AM
2984         into [AD][MN][01] for encoding the position of the register
2985         in the opcode.
2986
2987 Wed Oct  9 11:19:26 1996  Jeffrey A Law  (law@cygnus.com)
2988
2989         * mn10300-opc.c (mn10300_opcodes): Add "extended" instructions,
2990         "putx", "getx", "mulq", "mulqu", "sat16", "sat24", "bsch".
2991
2992 Tue Oct  8 11:55:35 1996  Jeffrey A Law  (law@cygnus.com)
2993
2994         * mn10300-opc.c (mn10300_operands): Remove "REGS" operand.
2995         Fix various typos.  Add "PAREN" operand.
2996         (MEM, MEM2): Define.
2997         (mn10300_opcodes): Surround all memory addresses with "PAREN"
2998         operands.  Fix several typos.
2999
3000         * mn10300-opc.c (mn10300_opcodes): Fix typos in yesterday's
3001         changes.
3002
3003 Mon Oct  7 16:48:45 1996  Jeffrey A Law  (law@cygnus.com)
3004
3005         * mn10300-opc.c (FMT_XX): Renumber starting at one.
3006         (mn10300_operands): Rough cut.  Enough to parse "mov" instructions
3007         at this time.
3008         (mn10300_opcodes): Break opcode format out into its own field.
3009         Update many operand fields to deal with signed vs unsigned
3010         issues.  Fix one or two typos in the "mov" instruction
3011         opcode, mask and/or operand fields.
3012
3013 Mon Oct  7 11:39:49 1996  Andreas Schwab  <schwab@issan.informatik.uni-dortmund.de>
3014
3015         * m68k-opc.c (plusha): Prefer encoding for m68040up, in case
3016         m68851 wasn't reset.
3017
3018 Thu Oct  3 17:17:02 1996  Ian Lance Taylor  <ian@cygnus.com>
3019
3020         * mn10300-opc.c (mn10300_opcodes): Add opcode & masks for
3021         all opcodes.  Very rough cut at operands for all opcodes.
3022
3023         * mn10300-opc.c (mn10300_opcodes): Start fleshing out the
3024         opcode table.
3025
3026 Thu Oct  3 10:06:07 1996  Jeffrey A Law  (law@cygnus.com)
3027
3028         * mn10200-opc.c, mn10300-opc.c: New files.
3029         * mn10200-dis.c, mn10300-dis.c: New files.
3030         * mn10x00-opc.c, mn10x00-dis.c: Deleted.
3031         * disassemble.c: Break mn10x00 support into 10200 and 10300
3032         support.
3033         * configure.in: Likewise.
3034         * configure: Rebuilt.
3035
3036 Thu Oct  3 15:59:12 1996  Jason Molenda  (crash@godzilla.cygnus.co.jp)
3037
3038         * Makefile.in (MOSTLYCLEAN): Move config.log to distclean.
3039
3040 Wed Oct  2 23:28:42 1996  Jeffrey A Law  (law@cygnus.com)
3041
3042         * mn10x00-opc.c, mn10x00-dis.c: New files for Matsushita
3043         MN10x00 processors.
3044         * disassemble (ARCH_mn10x00): Define.
3045         (disassembler): Handle bfd_arch_mn10x00.
3046         * configure.in: Recognize bfd_mn10x00_arch.
3047         * configure: Rebuilt.
3048
3049 Tue Oct  1 10:49:11 1996  Ian Lance Taylor  <ian@cygnus.com>
3050
3051         * i386-dis.c (op_rtn): Change to be a pointer.  Adjust uses
3052         accordingly.  Don't declare functions using op_rtn.
3053
3054 Fri Sep 27 18:28:59 1996  Stu Grossman  (grossman@critters.cygnus.com)
3055
3056         * v850-dis.c (disassemble):  Add memaddr argument.  Re-arrange
3057         params to be more standard.
3058         * (disassemble):  Print absolute addresses and symbolic names for
3059         branch and jump targets.
3060         * v850-opc.c (v850_operand):  Add displacement flag to 9 and 22
3061         bit operands.
3062         * (v850_opcodes):  Add breakpoint insn.
3063
3064 Mon Sep 23 12:32:26 1996  Ian Lance Taylor  <ian@cygnus.com>
3065
3066         * m68k-opc.c: Move the fmovemx data register cases before the
3067         other cases, so that they get recognized before the data register
3068         does gets treated as a degenerate register list.
3069
3070 Tue Sep 17 12:06:51 1996  Ian Lance Taylor  <ian@cygnus.com>
3071
3072         * mips-opc.c: Add a case for "div" and "divu" with two registers
3073         and a destination of $0.
3074
3075 Tue Sep 10 16:12:39 1996  Fred Fish  <fnf@rtl.cygnus.com>
3076
3077         * mips-dis.c (print_insn_arg): Add prototype.
3078         (_print_insn_mips): Ditto.
3079
3080 Mon Sep  9 14:26:26 1996  Ian Lance Taylor  <ian@cygnus.com>
3081
3082         * mips-dis.c (print_insn_arg): Print condition code registers as
3083         $fccN.
3084
3085 Tue Sep  3 12:09:46 1996  Doug Evans  <dje@canuck.cygnus.com>
3086
3087         * sparc-opc.c (sparc_opcodes): Add setuw, setsw, setx.
3088
3089 Tue Sep  3 12:05:25 1996  Jeffrey A Law  (law@cygnus.com)
3090
3091         * v850-dis.c (disassemble): Make static.  Provide prototype.
3092
3093 Sun Sep  1 22:30:40 1996  Jeffrey A Law  (law@cygnus.com)
3094
3095         * v850-opc.c (insert_d9, insert_d22): Fix boundary case
3096         in range checks.
3097
3098 Sat Aug 31 01:27:26 1996  Jeffrey A Law  (law@cygnus.com)
3099
3100         * v850-dis.c (disassemble): Handle insertion of ',', '[' and
3101         ']' characters into the output stream.
3102         * v850-opc.c (v850_opcodes: Remove size field from all opcodes.
3103         Add "memop" field to all opcodes (for the disassembler).
3104         Reorder opcodes so that "nop" comes before "mov" and "jr"
3105         comes before "jarl".
3106
3107         * v850-dis.c (print_insn_v850): Fix typo in last change.
3108
3109         * v850-dis.c (print_insn_v850): Properly handle disassembling
3110         a two byte insn at the end of a memory region when the memory
3111         region's size is only two byte aligned.
3112
3113         * v850-dis.c (v850_cc_names): Fix stupid thinkos.
3114
3115         * v850-dis.c (v850_reg_names): Define.
3116         (v850_sreg_names, v850_cc_names): Likewise.
3117         (disassemble): Very rough cut at printing operands (unformatted).
3118
3119         * v850-opc.c (BOP_MASK): Fix.
3120         (v850_opcodes): Fix mask for jarl and jr.
3121
3122         * v850-dis.c: New file.  Skeleton for disassembler support.
3123         * Makefile.in Remove v850 references, they're not needed here.
3124         * configure.in: Add v850-dis.o when building v850 toolchains.
3125         * configure: Rebuilt.
3126         * disassemble.c (disassembler): Call v850 disassembler.
3127
3128         * v850-opc.c (insert_d8_7, extract_d8_7): New functions.
3129         (insert_d8_6, extract_d8_6): New functions.
3130         (v850_operands): Rename D7S to D7; operand for D7 is unsigned.
3131         Rename D8 to D8_7, use {insert,extract}_d8_7 routines.
3132         Add D8_6.
3133         (IF4A, IF4B): Use "D7" instead of "D7S".
3134         (IF4C, IF4D): Use "D8_7" instead of "D8".
3135         (IF4E, IF4F): New.  Use "D8_6".
3136         (v850_opcodes): Use IF4A/IF4B for sld.b/sst.b.  Use IF4C/IF4D for
3137         sld.h/sst.h.  Use IF4E/IF4F for sld.w/sst.w.
3138
3139         * v850-opc.c (insert_d16_15, extract_d16_15): New functions.
3140         (v850_operands): Change D16 to D16_15, use special insert/extract
3141         routines.  New new D16 that uses the generic insert/extract code.
3142         (IF7A, IF7B): Use D16_15.
3143         (IF7C, IF7D): New.  Use D16.
3144         (v850_opcodes): Use IF7C and IF7D for ld.b and st.b.
3145
3146         * v850-opc.c (insert_d9, insert_d22): Slightly improve error
3147         message.  Issue an error if the branch offset is odd.
3148
3149         * v850-opc.c: Add notes about needing special insert/extract
3150         for all the load/store insns, except "ld.b" and "st.b".
3151
3152         * v850-opc.c (insert_d22, extract_d22): New functions.
3153         (v850_operands): Use insert_d22 and extract_d22 for
3154         D22 operands.
3155         (insert_d9): Fix range check.
3156
3157 Fri Aug 30 18:01:02 1996  J.T. Conklin  <jtc@hippo.cygnus.com>
3158
3159         * v850-opc.c (v850_operands): Add V850_OPERAND_SIGNED flag
3160         and set bits field to D9 and D22 operands.
3161
3162 Thu Aug 29 11:10:46 1996  Jeffrey A Law  (law@cygnus.com)
3163
3164         * v850-opc.c (v850_operands): Define SR2 operand.
3165         (v850_opcodes): "ldsr" uses R1,SR2.
3166
3167         * v850-opc.c (v850_opcodes): Fix opcode specs for
3168         sld.w, sst.b, sst.h, sst.w, and nop.
3169
3170 Wed Aug 28 15:55:43 1996  Jeffrey A Law  (law@cygnus.com)
3171
3172         * v850-opc.c (v850_opcodes): Add null opcode to mark the
3173         end of the opcode table.
3174
3175 Mon Aug 26 13:35:53 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
3176
3177         * d10v-opc.c (pre_defined_registers): Added register pairs,
3178         "r0-r1", "r2-r3", etc.
3179
3180 Fri Aug 23 00:27:01 1996  Jeffrey A Law  (law@cygnus.com)
3181
3182         * v850-opc.c (v850_operands): Make I16 be a signed operand.
3183         Create I16U for an unsigned 16bit mmediate operand.
3184         (v850_opcodes): Use I16U for "ori", "andi" and "xori".
3185
3186         * v850-opc.c (v850_operands): Define EP operand.
3187         (IF4A, IF4B, IF4C, IF4D): Use EP.
3188
3189         * v850-opc.c (v850_opcodes): Fix opcode numbers for "mov"
3190         with immediate operand, "movhi".  Tweak "ldsr".
3191
3192         * v850-opc.c (v850_opcodes): Get ld.[bhw] and st.[bhw]
3193         correct.  Get sld.[bhw] and sst.[bhw] closer.
3194
3195         * v850-opc.c (v850_operands): "not" is a two byte insn
3196
3197         * v850-opc.c (v850_opcodes): Correct bit pattern for setf.
3198
3199         * v850-opc.c (v850_operands): D16 inserts at offset 16!
3200
3201         * v850-opc.c (two): Get order of words correct.
3202
3203         * v850-opc.c (v850_operands): I16 inserts at offset 16!
3204
3205         * v850-opc.c (v850_operands): Add "SR1" and "SR2" for system
3206         register source and destination operands.
3207         (v850_opcodes): Use SR1 and SR2 for "ldsr" and "stsr".
3208
3209         * v850-opc.c (v850_opcodes): Fix thinko in "jmp" opcode.  Fix
3210         same thinko in "trap" opcode.
3211
3212         * v850-opc.c (v850_opcodes): Add initializer for size field
3213         on all opcodes.
3214
3215         * v850-opc.c (v850_operands): D6 -> DS7.  References changed.
3216         Add D8 for 8-bit unsigned field in short load/store insns.
3217         (IF4A, IF4D): These both need two registers.
3218         (IF4C, IF4D): Define.  Use 8-bit unsigned field.
3219         (v850_opcodes): For "sld.h", "sld.w", "sst.h", "sst.w", use
3220         IF4C & IF4D.  For "trap" use I5U, not I5.  Add IF1 operand
3221         for "ldsr" and "stsr".
3222         * v850-opc.c (v850_operands): 3-bit immediate for bit insns
3223         is unsigned.
3224
3225         * v850-opc.c (v850_opcodes): Correct short store half (sst.h) and
3226         short store word (sst.w).
3227
3228 Thu Aug 22 16:57:27 1996  J.T. Conklin  <jtc@rtl.cygnus.com>
3229
3230         * v850-opc.c (v850_operands): Added insert and extract fields,
3231         pointers to functions that handle unusual operand encodings.
3232
3233 Thu Aug 22 01:05:24 1996  Jeffrey A Law  (law@cygnus.com)
3234
3235         * v850-opc.c (v850_opcodes): Enable "trap".
3236
3237         * v850-opc.c (v850_opcodes): Fix order of displacement
3238         and register for "set1", "clr1", "not1", and "tst1".
3239
3240 Wed Aug 21 18:46:26 1996  Jeffrey A Law  (law@cygnus.com)
3241
3242         * v850-opc.c (v850_operands): Add "B3" support.
3243         (v850_opcodes): Fix and enable "set1", "clr1", "not1"
3244         and "tst1".
3245
3246         * v850-opc.c (v850_opcodes): "jmp" has only an R1 operand.
3247
3248         * v850-opc.c: Close unterminated comment.
3249
3250 Wed Aug 21 17:31:26 1996  J.T. Conklin  <jtc@hippo.cygnus.com>
3251
3252         * v850-opc.c (v850_operands): Add flags field.
3253         (v850_opcodes): add move opcodes.
3254
3255 Tue Aug 20 14:41:03 1996  J.T. Conklin  <jtc@hippo.cygnus.com>
3256
3257         * Makefile.in (ALL_MACHINES): Add v850-opc.o.
3258         * configure: (bfd_v850v_arch) Add new case.
3259         * configure.in: (bfd_v850_arch) Add new case.
3260         * v850-opc.c: New file.
3261
3262 Mon Aug 19 15:21:38 1996  Doug Evans  <dje@canuck.cygnus.com>
3263
3264         * sparc-dis.c (print_insn_sparc): Handle little endian sparcs.
3265
3266 Thu Aug 15 13:14:43 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
3267
3268         * d10v-opc.c: Add additional information to the opcode
3269         table to help determinine which instructions can be done
3270         in parallel.
3271
3272 Thu Aug 15 13:11:13 1996  Stan Shebs  <shebs@andros.cygnus.com>
3273
3274         * mpw-make.sed: Update editing of include pathnames to be
3275         more general.
3276
3277 Thu Aug 15 16:28:41 1996  James G. Smith  <jsmith@cygnus.co.uk>
3278
3279         * arm-opc.h: Added "bx" instruction definition.
3280
3281 Wed Aug 14 17:00:04 1996  Richard Henderson  <rth@tamu.edu>
3282
3283         * alpha-opc.c (EV4EXTHWINDEX): Field width should be 8 not 5.
3284
3285 Mon Aug 12 14:30:37 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
3286
3287         * d10v-opc.c (d10v_opcodes): Minor fixes to addi and bl.l.
3288
3289 Fri Aug  9 13:21:59 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
3290
3291         * d10v-opc.c (d10v_opcodes): Correct 'mv' unit entry to EITHER.
3292
3293 Thu Aug  8 12:43:52 1996  Klaus Kaempf  <kkaempf@progis.de>
3294
3295         * makefile.vms: Update for alpha-opc changes.
3296
3297 Wed Aug  7 11:55:10 1996  Ian Lance Taylor  <ian@cygnus.com>
3298
3299         * i386-dis.c (print_insn_i386): Actually return the correct value.
3300         (ONE, OP_ONE): #ifdef out; not used.
3301
3302 Fri Aug  2 17:47:03 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
3303
3304         * d10v-opc.c (d10v_opcodes): Added 2 accumulator sub instructions.
3305         Changed subi operand type to treat 0 as 16.
3306
3307 Wed Jul 31 16:21:41 1996  Ian Lance Taylor  <ian@cygnus.com>
3308
3309         * m68k-opc.c: Add cpushl for the mcf5200.  From Ken Rose
3310         <rose@netcom.com>.
3311
3312 Wed Jul 31 14:39:27 1996  James G. Smith  <jsmith@cygnus.co.uk>
3313
3314         * arm-opc.h: (arm_opcodes): Added halfword and sign-extension
3315         memory transfer instructions. Add new format string entries %h and %s.
3316         * arm-dis.c: (print_insn_arm): Provide decoding of the new
3317         formats %h and %s.
3318
3319 Fri Jul 26 11:45:04 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
3320
3321         * d10v-opc.c (d10v_operands): Added UNUM4S; a 4-bit accumulator shift.
3322         (d10v_opcodes): Modified accumulator shift instructions to use UNUM4S.
3323
3324 Fri Jul 26 14:01:43 1996  Ian Lance Taylor  <ian@cygnus.com>
3325
3326         * alpha-dis.c (print_insn_alpha_osf): Remove.
3327         (print_insn_alpha_vms): Remove.
3328         (print_insn_alpha): Make globally visible.  Chose the register
3329         names based on info->flavour.
3330         * disassemble.c: Always return print_insn_alpha for the alpha.
3331
3332 Thu Jul 25 15:24:17 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
3333
3334         * d10v-dis.c (dis_long): Handle unknown opcodes.
3335
3336 Thu Jul 25 12:08:09 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
3337
3338         * d10v-opc.c: Changes to support signed and unsigned numbers.
3339         All instructions with the same name that have long and short forms
3340         now end in ".l" or ".s".  Divs added.
3341         * d10v-dis.c: Changes to support signed and unsigned numbers.
3342
3343 Tue Jul 23 11:02:53 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
3344
3345         * d10v-dis.c: Change all functions to use info->print_address_func.
3346
3347 Mon Jul 22 15:38:53 1996  Andreas Schwab  <schwab@issan.informatik.uni-dortmund.de>
3348
3349         * m68k-opc.c (m68k_opcodes): Make opcode masks for the ColdFire
3350         move ccr/sr insns more strict so that the disassembler only
3351         selects them when the addressing mode is data register.
3352
3353 Mon Jul 22 11:25:24 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
3354         * d10v-opc.c (pre_defined_registers):  Declare.
3355         * d10v-dis.c (print_operand): Now uses pre_defined_registers
3356         to pick a better name for the registers.
3357
3358 Mon Jul 22 13:47:23 1996  Ian Lance Taylor  <ian@cygnus.com>
3359
3360         * sparc-opc.c: Fix opcode values for fpack16, and fpackfix.  Fix
3361         operands for fexpand and fpmerge.  From Christian Kuehnke
3362         <Christian.Kuehnke@arbi.informatik.uni-oldenburg.de>.
3363
3364 Mon Jul 22 13:17:06 1996  Richard Henderson  <rth@tamu.edu>
3365
3366         * alpha-dis.c (print_insn_alpha): No longer the user-visible
3367         print routine.  Take new regnames and cpumask arguments.
3368         Kill the environment variable nonsense.
3369         (print_insn_alpha_osf): New function.  Do OSF/1 style regnames.
3370         (print_insn_alpha_vms): New function.  Do VMS style regnames.
3371         * disassemble.c (disassembler): Test bfd flavour to pick
3372         between OSF and VMS routines.  Default to OSF.
3373
3374 Thu Jul 18 17:19:34 1996  Ian Lance Taylor  <ian@cygnus.com>
3375
3376         * configure.in: Call AC_SUBST (INSTALL_SHLIB).
3377         * configure: Rebuild.
3378         * Makefile.in (install): Use @INSTALL_SHLIB@.
3379
3380 Wed Jul 17 14:39:05 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
3381
3382         * configure: (bfd_d10v_arch) Add new case.
3383         * configure.in: (bfd_d10v_arch) Add new case.
3384         * d10v-dis.c: New file.
3385         * d10v-opc.c: New file.
3386         * disassemble.c (disassembler) Add entry for d10v.
3387
3388 Wed Jul 17 10:12:05 1996  J.T. Conklin  <jtc@rtl.cygnus.com>
3389
3390         * m68k-opc.c (m68k_opcodes): Fix bugs in coldfire insns relating
3391         to bcc, trapfl, subxl, and wddata discovered by Andreas Schwab.
3392
3393 Mon Jul 15 16:59:55 1996  Stu Grossman  (grossman@critters.cygnus.com)
3394
3395         * i386-dis.c:  Get rid of print_insn_i8086.  Use info.mach to
3396         distinguish between variants of the instruction set.
3397         * sparc-dis.c:  Get rid of print_insn_sparclite.  Use info.mach to
3398         distinguish between variants of the instruction set.
3399
3400 Fri Jul 12 10:12:01 1996  Stu Grossman  (grossman@critters.cygnus.com)
3401
3402         * i386-dis.c (print_insn_i8086):  New routine to disassemble using
3403         the 8086 instruction set.
3404         * i386-dis.c:  General cleanups.  Make most things static.  Add
3405         prototypes.  Get rid of static variables aflags and dflags.  Pass
3406         them as args (to almost everything).
3407
3408 Thu Jul 11 11:58:44 1996  Jeffrey A Law  (law@cygnus.com)
3409
3410         * h8300-dis.c (bfd_h8_disassemble): Handle macregs in ldmac insns.
3411
3412         * h8300-dis.c (bfd_h8_disassemble): Handle "ldm.l" and "stm.l".
3413
3414         * h8300-dis.c (bfd_h8_disassemble): "abs" is implicitly two
3415         if the next arg is marked with SRC_IN_DST.  Gross.
3416
3417         * h8300-dis.c (bfd_h8_disassemble): Print "exr" when
3418         we're looking for and find EXR.
3419
3420         * h8300-dis.c (bfd_h8_disassemble): We don't have a match
3421         if we're looking for KBIT and we don't find it.
3422
3423         * h8300-dis.c (bfd_h8_disassemble): Mask off unwanted bits
3424         for L_3 and L_2.
3425
3426         * h8300-dis.c (bfd_h8_disassemble): Don't set plen for
3427         3bit immediate operands.
3428
3429 Tue Jul  9 10:55:20 1996  Ian Lance Taylor  <ian@cygnus.com>
3430
3431         * Released binutils 2.7.
3432
3433         * alpha-opc.c: Add new case of "mov".  From Klaus Kaempf
3434         <kkaempf@progis.ac-net.de>.
3435
3436 Thu Jul  4 11:42:51 1996  Ian Lance Taylor  <ian@cygnus.com>
3437
3438         * alpha-opc.c: Correct second case of "mov" to use OPRL.
3439
3440 Wed Jul  3 16:03:47 1996  Stu Grossman  (grossman@critters.cygnus.com)
3441
3442         * sparc-dis.c (print_insn_sparclite):  New routine to print
3443         sparclite instructions.
3444
3445 Wed Jul  3 14:21:18 1996  J.T. Conklin  <jtc@rtl.cygnus.com>
3446
3447         * m68k-opc.c (m68k_opcodes): Add coldfire support.
3448
3449 Fri Jun 28 15:53:51 1996  Doug Evans  <dje@canuck.cygnus.com>
3450
3451         * sparc-opc.c (asi_table): Add #ASI_N, #ASI_N_L, #ASI_NUCLEUS,
3452         #ASI_NUCLEUS_LITTLE.  Rename #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_L
3453         to #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_LITTLE.
3454
3455 Tue Jun 25 22:58:31 1996  Jason Molenda  (crash@godzilla.cygnus.co.jp)
3456
3457         * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir):
3458         Use autoconf-set values.
3459         (docdir, oldincludedir): Removed.
3460         * configure.in (AC_PREREQ): autoconf 2.5 or higher.
3461
3462 Fri Jun 21 13:53:36 1996  Richard Henderson  <rth@tamu.edu>
3463
3464         * alpha-opc.c: New file.
3465         * alpha-opc.h: Remove.
3466         * alpha-dis.c: Complete rewrite to use new opcode table.
3467         * configure.in: For bfd_alpha_arch, use alpha-opc.o.
3468         * configure: Rebuild with autoconf 2.10.
3469         * Makefile.in (ALL_MACHINES): Add alpha-opc.o.
3470         (alpha-dis.o): Depend upon $(INCDIR)/opcode/alpha.h, not
3471         alpha-opc.h.
3472         (alpha-opc.o): New target.
3473
3474 Wed Jun 19 15:55:12 1996  Ian Lance Taylor  <ian@cygnus.com>
3475
3476         * sparc-dis.c (print_insn_sparc): Remove unused local variable i.
3477         Set imm_added_to_rs1 even if the source and destination register
3478         are not the same.
3479
3480         * sparc-opc.c: Add some two operand forms of the wr instruction.
3481
3482 Tue Jun 18 15:58:27 1996  Jeffrey A. Law  <law@rtl.cygnus.com>
3483
3484         * h8300-dis.c (bfd_h8_disassemble): Rename "hmode" argument
3485         to just "mode".
3486
3487         * disassemble.c (disassembler): Handle H8/S.
3488         * h8300-dis.c (print_insn_h8300s): New function for H8/S.
3489
3490 Tue Jun 18 18:06:50 1996  Ian Lance Taylor  <ian@cygnus.com>
3491
3492         * sparc-opc.c: Add beq/teq as aliases for be/te.
3493
3494         * ppc-opc.c: Fix fcmpo opcode.  From Sergei Steshenko
3495         <sergei@msil.sps.mot.com>.
3496
3497 Tue Jun 18 15:08:54 1996  Klaus Kaempf  <kkaempf@progis.de>
3498
3499         * makefile.vms: New file.
3500
3501         * alpha-dis.c (print_insn_alpha): Print lda ra,lit(rz) as mov.
3502
3503 Mon Jun 10 18:50:38 1996  Ian Lance Taylor  <ian@cygnus.com>
3504
3505         * h8300-dis.c (bfd_h8_disassemble): Always print ABS8MEM with :8,
3506         regardless of plen.
3507
3508 Tue Jun  4 09:15:53 1996  Doug Evans  <dje@canuck.cygnus.com>
3509
3510         * i386-dis.c (OP_OFF): Call append_prefix.
3511
3512 Thu May 23 15:18:23 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
3513
3514         * ppc-opc.c (instruction encoding macros): Add explicit casts to
3515         unsigned long to silence a warning from the Solaris PowerPC
3516         compiler.
3517
3518 Thu Apr 25 19:33:32 1996  Doug Evans  <dje@canuck.cygnus.com>
3519
3520         * sparc-opc.c (sparc_opcodes): Add ultrasparc vis extensions.
3521
3522 Mon Apr 22 17:12:35 1996  Doug Evans  <dje@blues.cygnus.com>
3523
3524         * sparc-dis.c (X_IMM,X_SIMM): New macros.
3525         (X_IMM13): Delete.
3526         (print_insn_sparc): Merge cases i,I,j together.  New cases X,Y.
3527         * sparc-opc.c (sparc_opcodes): Use X for 5 bit shift constants,
3528         Y for 6 bit shift constants.  Rewrite entries for crdcxt, cwrcxt,
3529         cpush, cpusha, cpull sparclet insns.
3530
3531 Wed Apr 17 14:20:22 1996  Doug Evans  <dje@canuck.cygnus.com>
3532
3533         * sparc-dis.c (compute_arch_mask): Replace ANSI style def with K&R.
3534
3535 Thu Apr 11 17:30:02 1996  Ian Lance Taylor  <ian@cygnus.com>
3536
3537         * sparc-opc.c: Set F_FBR on floating point branch instructions.
3538         Set F_FLOAT on other floating point instructions.
3539
3540 Mon Apr  8 17:02:48 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
3541
3542         * ppc-opc.c (PPC860): Macro for 860/821 specific instructions and
3543         registers.
3544         (powerpc_opcodes): Add 860/821 specific SPRs.
3545
3546 Mon Apr  8 14:00:44 1996  Ian Lance Taylor  <ian@cygnus.com>
3547
3548         * configure.in: Permit --enable-shared to specify a list of
3549         directories.  Set and substitute BFD_PICLIST.
3550         * configure: Rebuild.
3551         * Makefile.in (BFD_PICLIST): Rename from BFD_LIST.  Change all
3552         uses.  Set to @BFD_PICLIST@.
3553
3554 Fri Apr  5 17:12:27 1996  Jeffrey A Law  (law@cygnus.com)
3555
3556         * h8300-dis.c (bfd_h8_disassemble): Use "bit" for L_3 immediates,
3557         not "abs", which may be needed for the absolute in something
3558         like btst #0,@10:8.  Print L_3 immediates separately from other
3559         immediates.  Change ABSMOV reference to ABS8MEM.
3560
3561 Wed Apr  3 10:40:45 1996  Doug Evans  <dje@canuck.cygnus.com>
3562
3563         * sparc-dis.c (opcodes_initialized): Move inside print_insn_sparc.
3564         (current_arch_mask): New static global.
3565         (compute_arch_mask): New static function.
3566         (print_insn_sparc): Delete sparc_v9_p.  New static local
3567         current_mach.  Resort opcode table if current_mach changes.
3568         Generalize "insn not supported" test.
3569         (compare_opcodes): Prefer supported opcodes to nonsupported ones.
3570         Delete test for v9/!v9.
3571         * sparc-opc.c (MASK_*): Use SPARC_OPCODE_ARCH_MASK.
3572         (v6notlet): Define.
3573         (brfc): Split into CBR and FBR for coprocessor/fp branches.
3574         (brfcx): Renamed to FBRX.
3575         (condfc): Renamed to CONDFC.  Pass v6notlet to CBR (standard
3576         coprocessor mnemonics are not supported on the sparclet).
3577         (condf): Renamed to CONDF.
3578         (SLCBCC2): Delete F_ALIAS flag.
3579
3580 Sat Mar 30 21:45:59 1996  Doug Evans  <dje@canuck.cygnus.com>
3581
3582         * sparc-opc.c (sparc_opcodes): rd must be 0 for
3583         mov foo,{%y,%psr,%wim,%tbr}.  Support mov foo,%asrX.
3584
3585 Fri Mar 29 13:02:40 1996  Ian Lance Taylor  <ian@cygnus.com>
3586
3587         * Makefile.in (config.status): Depend upon BFD VERSION file, so
3588         that the shared library version number is set correctly.
3589
3590 Tue Mar 26 15:47:14 1996  Ian Lance Taylor  <ian@cygnus.com>
3591
3592         * configure.in: Use AC_CHECK_TOOL to find ar and ranlib.  From
3593         Miles Bader <miles@gnu.ai.mit.edu>.
3594         * configure: Rebuild.
3595
3596 Sat Mar 16 13:04:07 1996  Fred Fish  <fnf@cygnus.com>
3597
3598         * z8kgen.c (internal, gas): Call xmalloc rather than unchecked
3599         malloc.
3600
3601 Tue Mar 12 12:14:10 1996  Ian Lance Taylor  <ian@cygnus.com>
3602
3603         * configure: Rebuild with autoconf 2.8.
3604
3605 Thu Mar  7 15:11:10 1996  Doug Evans  <dje@charmed.cygnus.com>
3606
3607         * sparc-dis.c (print_insn_sparc): Handle 'O' operand char like 'r'.
3608         * sparc-opc.c (sparc_opcodes): Use 'O' operand char for `neg reg'.
3609
3610 Tue Mar  5 15:51:57 1996  Ian Lance Taylor  <ian@cygnus.com>
3611
3612         * configure.in: Don't set SHLIB or SHLINK to an empty string,
3613         since they appear as targets in Makefile.in.
3614         * configure: Rebuild.
3615
3616 Mon Feb 26 13:03:40 1996  Stan Shebs  <shebs@andros.cygnus.com>
3617
3618         * mpw-make.sed: Edit out shared library support bits.
3619
3620 Tue Feb 20 20:48:28 1996  Doug Evans  <dje@charmed.cygnus.com>
3621
3622         * sparc-opc.c (v8,v6notv9): Add MASK_SPARCLET.
3623         (sparc_opcode_archs): Add MASK_V8 to sparclet entry.
3624         (sparc_opcodes): Add sparclet insns.
3625         (sparclet_cpreg_table): New static local.
3626         (sparc_{encode,decode}_sparclet_cpreg): New functions.
3627         * sparc-dis.c (print_insn_sparc): Handle sparclet cpregs.
3628
3629 Tue Feb 20 11:02:44 1996  Alan Modra  <alan@mullet.Levels.UniSA.Edu.Au>
3630
3631         * i386-dis.c (index16): New static variable.
3632         (putop): Print jecxz for 32 bit case, jcxz for 16 bit, not the
3633         other way around.
3634         (OP_indirE): Return result of OP_E.
3635         (OP_E): Check for 16 bit addressing mode, and disassemble
3636         correctly.  Optimised 32 bit case a little.  Don't print
3637         "(base,index,scale)" when sib specifies only an offset.
3638
3639 Mon Feb 19 12:32:17 1996  Ian Lance Taylor  <ian@cygnus.com>
3640
3641         * configure.in: Set and substitute SHLIB_DEP.
3642         * configure: Rebuild.
3643         * Makefile.in (SHLIB_DEP): New variable.
3644         (LIBIBERTY_LISTS, BFD_LIST): New variables.
3645         (stamp-piclist): Depend upon LIBIBERTY_LISTS and BFD_LIST.  If
3646         COMMON_SHLIB, add them to piclist with appropriate modifications.
3647         ($(SHLIB)): Depend upon $(SHLIB_DEP).  Don't check COMMON_SHLIB
3648         here: just use piclist.
3649
3650 Mon Feb 19 02:03:50 1996  Doug Evans  <dje@charmed.cygnus.com>
3651
3652         * sparc-dis.c (MASK_V9,V9_ONLY_P,V9_P): Define.
3653         (print_insn_sparc): Rewrite v9/not-v9 tests.
3654         (compare_opcodes): Likewise.
3655         * sparc-opc.c (MASK_<ARCH>): Define.
3656         (v6,v7,v8,sparclite,v9,v9a): Redefine.
3657         (sparclet,v6notv9): Define.
3658         (sparc_opcode_archs): Delete member `conflicts'.  Add `supported'.
3659         (sparc_opcodes): Delete F_NOTV9, use v6notv9 instead.
3660
3661 Thu Feb 15 14:45:05 1996  Ian Lance Taylor  <ian@cygnus.com>
3662
3663         * configure.in: Call AC_PROG_CC before configure.host.
3664         * configure: Rebuild.
3665
3666         * Makefile.in (SONAME): Remove leading ../bfd/ from $(SHLIB).
3667
3668 Wed Feb 14 19:01:27 1996  Alan Modra  <alan@spri.levels.unisa.edu.au>
3669
3670         * i386-dis.c (onebyte_has_modrm): New static array.
3671         (twobyte_has_modrm): New static array.
3672         (print_insn_i386): Only fetch the mod/reg/rm byte if it is needed.
3673
3674 Tue Feb 13 15:15:01 1996  Ian Lance Taylor  <ian@cygnus.com>
3675
3676         * Makefile.in ($(SHLINK)): Check ts against $(SHLIB), not
3677         $(SHLINK).
3678
3679 Mon Feb 12 16:26:06 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
3680
3681         * ppc-opc.c (PPC): Undef, so default defination on Windows NT
3682         doesn't conflict.
3683
3684 Wed Feb  7 13:59:54 1996  Ian Lance Taylor  <ian@cygnus.com>
3685
3686         * m68k-opc.c (m68k_opcodes): The bkpt instruction is supported on
3687         m68010up, not just m68020up | cpu32.
3688
3689         * Makefile.in (SONAME): New variable.
3690         ($(SHLINK)): Make a link to the transformed name, as well.
3691         (stamp-tshlink): New target.
3692         (install): Skip stamp-tshlink during install.
3693
3694 Tue Feb  6 12:28:54 1996  Ian Lance Taylor  <ian@cygnus.com>
3695
3696         * configure.in: Call AC_ARG_PROGRAM.
3697         * configure: Rebuild.
3698         * Makefile.in (program_transform_name): New variable.
3699         (install): Transform library name before installing it.
3700
3701 Mon Feb  5 16:14:42 1996  Ian Lance Taylor  <ian@cygnus.com>
3702
3703         * i960-dis.c (mem): Add HX dcinva instruction.
3704
3705         Support for building as a shared library, based on patches from
3706         Alan Modra <alan@spri.levels.unisa.edu.au>:
3707         * configure.in: Add AC_ARG_ENABLE for shared and commonbfdlib.
3708         New substitutions: ALLLIBS, PICFLAG, SHLIB, SHLIB_CC,
3709         SHLIB_CFLAGS, COMMON_SHLIB, SHLINK.
3710         * configure: Rebuild.
3711         * Makefile.in (ALLLIBS): New variable.
3712         (PICFLAG, SHLIB, SHLIB_CC, SHLIB_CFLAGS): New variables.
3713         (COMMON_SHLIB, SHLINK): New variables.
3714         (.c.o): If PICFLAG is set, compile twice, once PIC, once normal.
3715         (STAGESTUFF): Remove variable.
3716         (all): Depend upon $(ALLLIBS) rather than $(TARGETLIB).
3717         (stamp-piclist, piclist): New targets.
3718         ($(SHLIB), $(SHLINK)): New targets.
3719         ($(OFILES)): Depend upon stamp-picdir.
3720         (disassemble.o): Build twice if PICFLAG is set.
3721         (MOSTLYCLEAN): Add pic/*.o.
3722         (clean): Remove $(SHLIB), $(SHLINK), piclist, and stamp-piclist.
3723         (distclean): Remove pic and stamp-picdir.
3724         (install): Install shared libraries.
3725         (stamp-picdir): New target.
3726
3727 Fri Feb  2 17:15:25 1996  Doug Evans  <dje@charmed.cygnus.com>
3728
3729         * sparc-dis.c (print_insn_sparc): Delete DISASM_RAW_INSN support.
3730         Print unknown instruction as "unknown", rather than in hex.
3731
3732 Tue Jan 30 14:06:08 1996  Ian Lance Taylor  <ian@cygnus.com>
3733
3734         * dis-buf.c: Include "sysdep.h" before "dis-asm.h".
3735
3736 Thu Jan 25 20:24:07 1996  Doug Evans  <dje@charmed.cygnus.com>
3737
3738         * sparc-opc.c (sparc_opcode_archs): Mark v8/sparclite as conflicting.
3739
3740 Thu Jan 25 11:56:49 1996  Ian Lance Taylor  <ian@cygnus.com>
3741
3742         * i386-dis.c (print_insn_i386): Only fetch the mod/reg/rm byte
3743         when necessary.  From Ulrich Drepper
3744         <drepper@myware.rz.uni-karlsruhe.de>.
3745
3746 Thu Jan 25 03:39:10 1996  Doug Evans  <dje@charmed.cygnus.com>
3747
3748         * sparc-dis.c (print_insn_sparc): NUMOPCODES replaced with
3749         sparc_num_opcodes.  Update architecture enum values.
3750         * sparc-opc.c (sparc_opcode_archs): Replaces architecture_pname.
3751         (sparc_opcode_lookup_arch): New function.
3752         (sparc_num_opcodes): Renamed from bfd_sparc_num_opcodes.
3753         (sparc_opcodes): Add v9a shutdown insn.
3754
3755 Mon Jan 22 08:29:59 1996  Doug Evans  <dje@charmed.cygnus.com>
3756
3757         * sparc-dis.c (print_insn_sparc): Renamed from print_insn.
3758         If DISASM_RAW_INSN, print insn in hex.  Handle v9a as opcode
3759         architecture.
3760         (print_insn_sparc64): Deleted.
3761         * disassemble.c (disassembler, case bfd_arch_sparc): Always use
3762         print_insn_sparc.
3763
3764         * sparc-opc.c (architecture_pname): Add v9a.
3765
3766 Fri Jan 12 14:35:58 1996  David Mosberger-Tang  <davidm@AZStarNet.com>
3767
3768         * alpha-opc.h (alpha_insn_set): VAX floating point opcode was
3769         incorrectly defined as 0x16 when it should be 0x15.
3770         (FLOAT_FORMAT_MASK): function code is 11 bits, not just 7 bits!
3771         (alpha_insn_set): added cvtst and cvttq float ops.  Also added
3772         excb (exception barrier) which is defined in the Alpha
3773         Architecture Handbook version 2.
3774         * alpha-dis.c (print_insn_alpha): Fixed special-case decoding for
3775         OPERATE_FORMAT_CODE type instructions.  The bug caused mulq to be
3776         disassembled as or, for example.
3777
3778 Wed Jan 10 12:37:22 1996  Ian Lance Taylor  <ian@cygnus.com>
3779
3780         * mips-dis.c (print_insn_arg): Print cases 'i' and 'u' in hex.
3781         (_print_insn_mips): Change i from int to unsigned int.
3782
3783 Thu Jan  4 17:21:10 1996  David Edelsohn  <edelsohn@mhpcc.edu>
3784
3785         * ppc-opc.c (powerpc_opcodes): tlbi POWER opcode form different
3786         from tlbie PowerPC opcode.  Add PPC603 tlbld and tlbli.
3787
3788 Thu Dec 28 13:29:19 1995  John Hassey  <hassey@rtp.dg.com>
3789
3790         * i386-dis.c: Added Pentium Pro instructions.
3791
3792 Tue Dec 19 22:56:35 1995  Michael Meissner  <meissner@tiktok.cygnus.com>
3793
3794         * ppc-opc.c (fsqrt{,.}): Duplicate for PowerPC in addition to
3795         being for Power2.
3796
3797 Fri Dec 15 14:14:15 1995  J.T. Conklin  <jtc@rtl.cygnus.com>
3798
3799         * sh-opc.h (sh_nibble_type): Added REG_B.
3800         (sh_arg_type): Added A_REG_B.
3801         (sh_table): Added pref and bank reg versions of ldc, ldc.l, stc
3802         and stc.l opcodes.
3803         * sh-dis.c (print_insn_shx): Added cases for REG_B and A_REG_B.
3804
3805 Fri Dec 15 16:44:31 1995  Ian Lance Taylor  <ian@cygnus.com>
3806
3807         * disassemble.c (disassembler): Use new bfd_big_endian macro.
3808
3809 Tue Dec 12 12:22:24 1995  Ian Lance Taylor  <ian@cygnus.com>
3810
3811         * Makefile.in (distclean): Remove stamp-h.  From Ronald
3812         F. Guilmette <rfg@monkeys.com>.
3813
3814 Tue Dec  5 13:42:44 1995  Stan Shebs  <shebs@andros.cygnus.com>
3815
3816         From David Mosberger-Tang  <davidm@azstarnet.com>:
3817         * alpha-dis.c (print_insn_alpha): fixed decoding of cpys
3818         instruction.
3819
3820 Mon Dec  4 12:29:05 1995  J.T. Conklin  <jtc@rtl.cygnus.com>
3821
3822         * sh-opc.h (sh_arg_type): Added A_SSR and A_SPC.
3823         (sh_table): Added many SH3 opcodes.
3824         * sh-dis.c (print_insn_shx): Added cases for A_SSR and A_SPC.
3825
3826 Fri Dec  1 07:42:18 1995  Michael Meissner  <meissner@tiktok.cygnus.com>
3827
3828         * ppc-opc.c (subfc., subfco): Mark this PPCCOM, not PPC.
3829         (subco,subco.): Mark this PPC, not PPCCOM.
3830
3831 Mon Nov 27 13:09:52 1995  Ian Lance Taylor  <ian@cygnus.com>
3832
3833         * configure: Rebuild with autoconf 2.7.
3834
3835 Tue Nov 21 18:28:06 1995  Ian Lance Taylor  <ian@cygnus.com>
3836
3837         * configure: Rebuild with autoconf 2.6.
3838
3839 Wed Nov 15 19:02:53 1995  Ken Raeburn  <raeburn@cygnus.com>
3840
3841         * configure.in: Sort list of architectures.  Accept but do nothing
3842         for alliant, convex, pyramid, romp, and tahoe.
3843
3844 Wed Nov  8 20:18:59 1995  Ian Lance Taylor  <ian@cygnus.com>
3845
3846         * a29k-dis.c (print_special): Change num to unsigned int.
3847
3848 Wed Nov  8 20:10:35 1995  Eric Freudenthal <freudenthal@nyu.edu>
3849
3850         * a29k-dis.c (print_insn): Cast insn24 to unsigned long when
3851         shifting it.
3852
3853 Tue Nov  7 15:21:06 1995  Ian Lance Taylor  <ian@cygnus.com>
3854
3855         * configure.in: Call AC_CHECK_PROG to find and cache AR.
3856         * configure: Rebuilt.
3857
3858 Mon Nov  6 17:39:47 1995  Harry Dolan  <dolan@ssd.intel.com>
3859
3860         * configure.in: Add case for bfd_i860_arch.
3861         * configure: Rebuild.
3862
3863 Fri Nov  3 12:45:31 1995  Ian Lance Taylor  <ian@cygnus.com>
3864
3865         * m68k-opc.c (m68k_opcodes): Correct fmoveml operands.
3866         * m68k-dis.c (NEXTSINGLE): Change i to unsigned int.
3867         (NEXTDOUBLE): Likewise.
3868         (print_insn_m68k): Don't match fmoveml if there is more than one
3869         register in the list.
3870         (print_insn_arg): Handle a place of '8' for a type of 'L'.
3871
3872 Thu Nov  2 23:06:33 1995  Ian Lance Taylor  <ian@cygnus.com>
3873
3874         * m68k-opc.c: Use #W rather than #w.
3875         * m68k-dis.c (print_insn_arg): Handle new 'W' place.
3876
3877 Wed Nov  1 13:30:24 1995  Ian Lance Taylor  <ian@cygnus.com>
3878
3879         * m68k-opc.c (m68k_opcode_aliases): Add dbfw as an alias for dbf,
3880         and likewise for all the dbxx opcodes.
3881
3882 Mon Oct 30 20:50:40 1995  Fred Fish  <fnf@cygnus.com>
3883
3884         * arc-dis.c: Include elf-bfd.h rather than libelf.h.
3885
3886 Mon Oct 23 11:11:34 1995  James G. Smith  <jsmith@pasanda.cygnus.co.uk>
3887
3888         * mips-opc.c: Added shorthand (V1) for INSN_4100 manifest. Added
3889         the VR4100 specific instructions to the mips_opcodes structure.
3890
3891 Thu Oct 19 11:05:23 1995  Stan Shebs  <shebs@andros.cygnus.com>
3892
3893         * mpw-config.in, mpw-make.sed: Remove ugly workaround for
3894         ugly Metrowerks bug in CW6, is fixed in CW7.
3895
3896 Mon Oct 16 12:59:01 1995  Michael Meissner  <meissner@tiktok.cygnus.com>
3897
3898         * ppc-opc.c (whole file): Add flags for common/any support.
3899
3900 Tue Oct 10 11:06:07 1995  Fred Fish  <fnf@cygnus.com>
3901
3902         * Makefile.in (BISON): Remove macro.
3903         (FLAGS_TO_PASS): Remove BISON.
3904
3905 Fri Oct  6 16:26:45 1995  Ken Raeburn  <raeburn@cygnus.com>
3906
3907         Mon Sep 25 22:49:32 1995  Andreas Schwab  <schwab@issan.informatik.uni-dortmund.de>
3908
3909         * m68k-dis.c (print_insn_m68k): Recognize all two-word
3910         instructions that take no args by looking at the match mask.
3911         (print_insn_arg): Always print "%" before register names.
3912         [case 'c']: Use "nc" for the no-cache case, as recognized by gas.
3913         [case '_']: Don't print "@#" before address.
3914         [case 'J']: Use "%s" as format string, not register name.
3915         [case 'B']: Treat place == 'C' like 'l' and 'L'.
3916
3917 Thu Oct  5 22:16:20 1995  Ken Raeburn  <raeburn@cygnus.com>
3918
3919         * i386-dis.c: Describe cmpxchg8b operand, and spell the opcode
3920         name correctly.
3921
3922 Tue Oct  3 08:30:20 1995  steve chamberlain  <sac@slash.cygnus.com>
3923
3924         From David Mosberger-Tang  <davidm@azstarnet.com>
3925
3926         * alpha-opc.h (MEMORY_FUNCTION_FORMAT_MASK): added.
3927         (alpha_insn_set): added definitions for VAX floating point
3928         instructions (Unix compilers don't generate these, but handcoded
3929         assembly might still use them).
3930
3931         * alpha-dis.c (print_insn_alpha): added support for disassembling
3932         the miscellaneous instructions in the Alpha instruction set.
3933
3934 Tue Sep 26 18:47:20 1995  Stan Shebs  <shebs@andros.cygnus.com>
3935
3936         * mpw-config.in: Add m68k-opc.c.o to BFD_MACHINES for m68k,
3937         no longer create sysdep.h, sed ppc-opc.c to work around a
3938         serious Metrowerks C bug.
3939         * mpw-make.in: Remove.
3940         * mpw-make.sed: New file, used by mpw-configure to edit
3941         Makefile.in into an MPW makefile.
3942
3943 Wed Sep 20 12:55:28 1995  Ian Lance Taylor  <ian@cygnus.com>
3944
3945         * Makefile.in (maintainer-clean): New synonym for realclean.
3946
3947 Tue Sep 19 15:28:36 1995  Ian Lance Taylor  <ian@cygnus.com>
3948
3949         * m68k-opc.c: Split pmove patterns which use 'P' into patterns
3950         which use '0', '1', and '2' instead.  Specify the proper size for
3951         a pmove immediate operand.  Correct the pmovefd patterns to be
3952         moves to a register, not from a register.
3953         * m68k-dis.c (print_insn_arg): Replace 'P' with '0', '1', '2'.
3954
3955 Thu Sep 14 11:58:22 1995  Doug Evans  <dje@canuck.cygnus.com>
3956
3957         * sparc-opc.c (sparc_opcodes): Mark all insns that reference
3958         %psr, %wim, %tbr as F_NOTV9.
3959
3960 Fri Sep  8 01:07:38 1995  Ian Lance Taylor  <ian@cygnus.com>
3961
3962         * Makefile.in (Makefile): Just rebuild Makefile when running
3963         config.status.
3964         (config.h, stamp-h): New targets.
3965         * configure.in: Call AC_CONFIG_HEADER and AC_CANONICAL_SYSTEM
3966         earlier.  Don't bother to call AC_ARG_PROGRAM.  Touch stamp-h when
3967         rebuilding config.h.
3968         * configure: Rebuild.
3969
3970         * mips-opc.c: Change unaligned loads and stores with "t,A"
3971         operands to use "t,A(b)".
3972
3973 Thu Sep  7 19:02:46 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
3974
3975         * sh-dis.c (print_insn_shx): Add F_FR0 support.
3976
3977 Thu Sep  7 19:02:46 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
3978
3979         * sh-dis.c (print_insn_shx): Change loop over op->arg[n] to iterate
3980         until 3 instead of until 2.
3981
3982 Wed Sep  6 21:21:33 1995  Ian Lance Taylor  <ian@cygnus.com>
3983
3984         * Makefile.in (ALL_CFLAGS): Define.
3985         (.c.o, disassemble.o): Use $(ALL_CFLAGS).
3986         (MOSTLYCLEAN): Add config.log.
3987         (distclean): Don't remove config.log.
3988         * configure.in: Substitute HDEFINES.
3989         * configure: Rebuild.
3990
3991 Wed Sep  6 15:08:09 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
3992
3993         * sh-opc.h (sh_arg_type): Add F_FR0.
3994         (sh_table, case fmac): Add F_FR0 as first argument.
3995
3996 Wed Sep  6 15:08:09 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
3997
3998         * sh-opc.h (sh_opcode_info): Increase arg array size to 4.
3999
4000 Tue Sep  5 18:28:10 1995  Doug Evans  <dje@canuck.cygnus.com>
4001
4002         * sparc-dis.c: Remove all references to NO_V9.
4003
4004 Tue Sep  5 20:03:26 1995  Ian Lance Taylor  <ian@cygnus.com>
4005
4006         * aclocal.m4: Just include ../bfd/aclocal.m4.
4007         * configure: Rebuild.
4008
4009 Tue Sep  5 16:09:59 1995  Doug Evans  <dje@canuck.cygnus.com>
4010
4011         * sparc-dis.c (X_DISP19): Define.
4012         (print_insn, case 'G'): Use it.
4013         (print_insn, case 'L'): Sign extend displacement.
4014
4015 Mon Sep  4 14:28:46 1995  Ian Lance Taylor  <ian@cygnus.com>
4016
4017         * configure.in: Run ../bfd/configure.host before AC_PROG_CC.
4018         Subsitute CFLAGS and AR.  Call AC_PROG_INSTALL.  Don't substitute
4019         host_makefile_frag or frags.
4020         * aclocal.m4: New file.
4021         * configure: Rebuild.
4022         * Makefile.in (INSTALL): Set to @INSTALL@.
4023         (INSTALL_PROGRAM): Set to @INSTALL_PROGRAM@.
4024         (INSTALL_DATA): Set to @INSTALL_DATA@.
4025         (AR): Set to @AR@.
4026         (AR_FLAGS): Set to rc rather than qc.
4027         (CC): Define as @CC@.
4028         (CFLAGS): Set to @CFLAGS@.
4029         (@host_makefile_frag@): Remove.
4030         (config.status): Remove dependency upon @frags@.
4031
4032         * configure.in: ../bfd/config.bfd now just sets shell variables.
4033         Use them rather than looking through target Makefile fragments.
4034         * configure: Rebuild.
4035
4036 Thu Aug 31 12:35:32 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
4037
4038         * sh-opc.h (ftrc): Change FPUL_N to FPUL_M.
4039
4040 Wed Aug 30 13:52:28 1995  Doug Evans  <dje@canuck.cygnus.com>
4041
4042         * sparc-opc.c (sparc_opcodes): Delete duplicate wr %y insn.
4043         Add clrx, iprefetch, signx, clruw, cas, casl, casx, casxl synthetic
4044         sparc64 insns.
4045
4046         * sparc-opc.c (sparc_opcodes): Fix prefetcha insn.
4047         (lookup_{name,value}): New functions.
4048         (prefetch_table): New static local.
4049         (sparc_{encode,decode}_prefetch): New functions.
4050         * sparc-dis.c (print_insn): Handle '*' arg (prefetch function).
4051
4052 Wed Aug 30 11:11:58 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
4053
4054         * sh-opc.h: Add blank lines to improve readabililty of sh3e
4055         instructions.
4056
4057 Wed Aug 30 11:09:38 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
4058
4059         * sh-dis.c: Correct comment on first line of file.
4060
4061 Tue Aug 29 15:37:18 1995  Doug Evans  <dje@canuck.cygnus.com>
4062
4063         * disassemble.c (disassembler): Handle bfd_mach_sparc64.
4064
4065         * sparc-opc.c (asi, membar): New static locals.
4066         (sparc_{encode,decode}_{asi,membar}): New functions.
4067         (sparc_opcodes, membar insn): Fix.
4068         * sparc-dis.c (print_insn): Call sparc_decode_asi.
4069         Support decoding of membar masks.
4070         (X_MEMBAR): Define.
4071
4072 Sat Aug 26 21:22:48 1995  Ian Lance Taylor  <ian@cygnus.com>
4073
4074         * m68k-opc.c (m68k_opcode_aliases): Add br, brs, brb, brw, brl.
4075
4076 Mon Aug 21 17:33:36 1995  Ian Lance Taylor  <ian@cygnus.com>
4077
4078         * m68k-opc.c (m68k_opcode_aliases): Add bhib as an alias for bhis,
4079         and likewise for the other branches.  Add bhs as an alias for bcc,
4080         and likewise for the size variants.  Add dbhs as an alias for
4081         dbcc.
4082
4083 Fri Aug 11 13:40:24 1995  Jeff Law  (law@snake.cs.utah.edu)
4084
4085         * sh-opc.h (FP sts instructions): Update to match reality.
4086
4087 Mon Aug  7 16:12:58 1995  Ian Lance Taylor  <ian@cygnus.com>
4088
4089         * m68k-dis.c: (fpcr_names): Add % before all register names.
4090         (reg_names): Likewise.
4091         (print_insn_arg): Don't explicitly print % before register names.
4092         Add % before register names in static array names.  In case 'r',
4093         print data registers as `@(Dn)', not `Dn@'.  When printing a
4094         memory address, don't print @# before it.
4095         (print_indexed): Change base_disp and outer_disp from int to
4096         bfd_vma.  Print using MIT syntax, not mutant invalid Motorola
4097         syntax.  Sign extend 8 byte displacement correctly.
4098         (print_base): Print using MIT syntax.  Print zpc when appropriate.
4099         Change parameter disp from int to bfd_vma.
4100
4101         * m68k-opc.c (m68k_opcode_aliases): Add jsrl and jsrs as aliases
4102         for jsr.
4103
4104 Mon Aug  7 02:21:40 1995  Jeff Law  (law@snake.cs.utah.edu)
4105
4106         * sh-dis.c (print_insn_shx): Handle new operand types F_REG_N,
4107         F_REG_M, FPSCR_M, FPSCR_N, FPUL_M and FPUL_N.
4108         * sh-opc.h (sh_arg_type): Add new operand types.
4109         (sh_table): Add new opcodes from SH3E Floating Point ISA.
4110
4111 Sat Aug  5 16:50:14 1995  Fred Fish  <fnf@cygnus.com>
4112
4113         * Makefile.in (distclean): Remove generated file config.h.
4114
4115 Sat Aug  5 16:50:14 1995  Fred Fish  <fnf@cygnus.com>
4116
4117         * Makefile.in (distclean): Remove generated file config.h.
4118
4119 Wed Aug  2 18:33:40 1995  Ian Lance Taylor  <ian@cygnus.com>
4120
4121         * m68k-opc.c: New file, holding tables from include/opcode/m68k.h.
4122         Clean up tables.
4123         * m68k-dis.c: Remove BREAK_UP_BIG_DECL stuff.
4124         (opcode): Remove.
4125         (print_insn_m68k): Change d to be const.  Use m68k_numopcodes
4126         rather than numopcodes.  Use m68k_opcodes rather than removed
4127         opcode function.  Don't check F_ALIAS.
4128         (print_insn_arg): Change first parameter to be const char *.
4129         * Makefile.in (ALL_MACHINES): Add m68k-opc.o.
4130         (m68k-opc.o): New target.
4131         * configure.in: Build m68k-opc.o for bfd_m68k_arch.
4132         * configure: Rebuild.
4133
4134 Wed Aug  2 08:23:38 1995  Doug Evans  <dje@canuck.cygnus.com>
4135
4136         * sparc-dis.c (HASH_SIZE, HASH_INSN): Define.
4137         (opcode_bits, opcode_hash_table): New variables.
4138         (opcodes_initialized): Renamed from opcodes_sorted.
4139         (build_hash_table): New function.
4140         (is_delayed_branch): Use hash table.
4141         (print_insn): Renamed from print_insn_sparc, made static.
4142         Build and use hash table.  If !sparc64, ignore sparc64 insns,
4143         and vice-versa if sparc64.
4144         (print_insn_sparc, print_insn_sparc64): New functions.
4145         (compare_opcodes): Move sparc64 opcodes to end.
4146         Print commutative insns with constant second.
4147         * sparc-opc.c (all non-v9 insns): Use flag F_NOTV9 instead of F_ALIAS.
4148
4149 Tue Aug  1 00:12:49 1995  Ian Lance Taylor  <ian@cygnus.com>
4150
4151         * sh-dis.c (print_insn_shx): Remove unused local dslot.  Use
4152         print_address_func for A_BDISP12 and A_BDISP8.  Correct test which
4153         avoids printing a delay slot in a delay slot.
4154         * sh-opc.h (sh_table): Fully bracket last entry.
4155
4156 Mon Jul 31 12:04:47 1995  Doug Evans  <dje@canuck.cygnus.com>
4157
4158         * sparc-opc.c (sllx, srax, srlx): Fix disassembly.
4159
4160 Wed Jul 12 00:59:34 1995  Ken Raeburn  <raeburn@kr-pc.cygnus.com>
4161
4162         * configure.in: Get host_makefile_frag from ${srcdir}.
4163
4164         * configure.in: Autoconfiscated.  Check for string[s].h.  Create
4165         config.h from config.in.  Don't set up sysdep.h link.
4166         * sysdep.h: New file.
4167         * configure, config.in: New files, generated from configure.in.
4168         * Makefile.in: Updated to be processed autoconf-style.
4169         (distclean): Keep sysdep.h.  Remove config.log and config.cache.
4170         (Makefile): Depend on config.status.
4171         (config.status): New rule.
4172         * configure.bat: Update Makefile substitutions.
4173
4174 Tue Jul 11 14:23:37 1995  Jeff Spiegel  <jeffs@lsil.com>
4175
4176         * mips-opc.c (L1): Define.
4177         (mips_opcodes): Add R4010 instructions: flushi, flushd, flushid,
4178         addciu, madd, maddu, ffc, ffs, msub, msubu, selsi, selsr, waiti,
4179         and wb.
4180
4181 Tue Jul 11 11:49:49 1995  Ian Lance Taylor  <ian@cygnus.com>
4182
4183         * mips-opc.c (mips_opcodes): For the move pseudo-op, prefer daddu
4184         if ISA 3 and addu otherwise, replacing or, since some MIPS chips
4185         have multiple add units but only a single logical unit.
4186
4187         * ppc-opc.c (powerpc_operands): Change CR to use a bitsize of 3,
4188         shifted by 18, without any insertion or extraction function.
4189         (insert_cr, extract_cr): Remove.
4190
4191 Wed Jun 21 20:05:39 1995  Ken Raeburn  <raeburn@cujo.cygnus.com>
4192
4193         * m68k-dis.c (print_insn_arg, print_indexed): Print "%" before
4194         register names.
4195
4196 Thu Jun 15 17:23:31 1995  Stan Shebs  <shebs@andros.cygnus.com>
4197
4198         * mpw-config.in: Add sh and i386 configs, remove sparc config.
4199         * sh-opc.h: Add copyright.
4200
4201 Mon Jun  5 03:30:43 1995  Ken Raeburn  <raeburn@kr-laptop.cygnus.com>
4202
4203         * Makefile.in (crunch-m68k): Delete extra target accidentally
4204         checked in a while ago.
4205
4206 Wed May 24 16:22:13 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
4207
4208         * sh-opc.h (sh_table): Add SH3 support.
4209
4210 Wed May 24 14:16:08 1995  Steve Chamberlain  <sac@slash.cygnus.com>
4211
4212         * sh-opc.h: Added bsrf and braf.
4213
4214 Wed May 10 14:28:16 1995 Richard Earnshaw (rearnsha@armltd.co.uk)
4215
4216         * arm-opc.h (arm_opcodes): Add 64-bit multiply patterns.  Delete
4217         bogus [ls]fm{ea,fd} patterns.
4218
4219         * arm-opc.h (arm_opcodes): Correct typos in stm, ldm, std, and ldc.
4220         * arm-dis.c (print_insn_arm): Make GIVEN a parameter, don't try and
4221         initialize it from memory.  Make function static.
4222         (print_insn_{big,little}_arm): New functions.
4223         * disassemble.c (disassembler, case bfd_arch_arm): Disassemble for
4224         the correct endianness.
4225
4226 Mon Apr 24 14:18:05 1995  Jason Molenda   (crash@phydeaux.cygnus.com>
4227
4228         * sh-opc.h (sh_nibble_type, sh_arg_type): remove trailing , from
4229         enum list.
4230
4231 Wed Apr 19 14:07:03 1995  Michael Meissner  <meissner@tiktok.cygnus.com>
4232
4233         * m68k-dis.c (opcode): Finish change made by Kung Hsu on April
4234         17th, so that it builds again using GCC as the compiler.
4235
4236 Tue Apr 18 12:14:51 1995  Ken Raeburn  <raeburn@cujo.cygnus.com>
4237
4238         * mips-dis.c (print_insn_little_mips): Cast return value from
4239         bfd_getl32 from bfd_vma to unsigned long, because _print_insn_mips
4240         expects an unsigned long, and that might be fewer words of
4241         argument storage (e.g., if bfd_vma is long long on a 32-bit
4242         machine).
4243         (print_insn_big_mips): Likewise with bfd_getb32 value.
4244         (_print_insn_mips): Now static.
4245
4246 Mon Apr 17 12:23:28 1995  Kung Hsu  <kung@rtl.cygnus.com>
4247
4248         * m68k-dis.c: Take out #define BREAK_UP_BIG_DECL kludge, because
4249         gcc memory hog problem with initializer is fixed.
4250
4251 Mon Apr 10 15:55:01 1995  Stan Shebs  <shebs@andros.cygnus.com>
4252
4253         Merge in support for Mac MPW as a host.
4254         (Old change descriptions retained for informational value.)
4255
4256         * mpw-config.in (archname): Compute from the config.
4257         (BFD_MACHINES, ARCHDEFS): Put into mk.tmp.
4258
4259         * mpw-config.in (target_arch): Compute from canonical target.
4260         (m68k, mips, powerpc, sparc): Add architectures.
4261         * mpw-make.in (disassemble.c.o): Add.
4262         (ALL_CFLAGS): Remove special flags (-mc68020 -mc68881 -model far).
4263
4264         * mpw-config.in (BFD_MACHINES): Set to a default value.
4265         * mpw-make.in (BFD_MACHINES): Remove wired-in value.
4266
4267         * mpw-make.in (CSEARCH): Add extra-include to search path.
4268
4269         * mpw-config.in (varargs.h): Don't create.
4270         (sysdep.h): Create using forward-include.
4271         * mpw-make.in (CSEARCH): Add include/mpw to search path.
4272
4273         * mpw-config.in: New file, MPW version of configure.in.
4274         * mpw-make.in: New file, MPW version of Makefile.in.
4275
4276 Fri Mar 31 14:23:38 1995  Ken Raeburn  <raeburn@cujo.cygnus.com>
4277
4278         * alpha-dis.c (print_insn_alpha): Put empty statement after
4279         default label.
4280
4281 Tue Mar 21 10:51:40 1995  Jeff Law  (law@snake.cs.utah.edu)
4282
4283         * hppa-dis.c (sign_extend): Delete, redundant with libhppa.h version.
4284         (low_sign_extend): Likewise.
4285         (get_field): Delete unused function.
4286         (set_field, deposit_14, deposit_21): Likewise.
4287
4288 Fri Mar 17 15:55:53 1995  J.T. Conklin  <jtc@rtl.cygnus.com>
4289
4290         * i386-dis.c: Support for more pentium opcodes.  From Guy Harris
4291           (guy@netapp.com).
4292
4293 Tue Mar 14 00:52:57 1995  Ken Raeburn  (raeburn@kr-pc.cygnus.com)
4294
4295         Sat Feb 11 17:22:41 1995  Klaus Kaempf  (kkaempf@didymus.rmi.de)
4296
4297         * alpha-opc.h (OSF_ASMCODE): define
4298         print pal-code names as defined in App C of the
4299         Alpha Architecture Reference Manual
4300
4301         * alpha-dis.c: cleaned up output
4302         print stylized code forms as defined in App A.4.3 of the
4303         Alpha Architecture Reference Manual
4304
4305 Wed Mar  8 15:21:14 1995  Ian Lance Taylor  <ian@cygnus.com>
4306
4307         * mips-opc.c: Add new mips4 instructions.  Don't set INSN_RFE for
4308         `rfe'.
4309         * mips-dis.c (print_insn_arg): Handle new argument types 'h', 'R',
4310         'N', and 'M'.
4311
4312 Wed Mar  8 02:54:05 1995  Ken Raeburn  <raeburn@cujo.cygnus.com>
4313
4314         * m68k-dis.c (opcode): New function.  Returns address of opcode
4315         table entry given index, even if the opcode table was split to
4316         work around gcc bugs.
4317         (print_insn_m68k): Call opcode instead of referencing m68k_opcodes
4318         directly.
4319         (BREAK_UP_BIG_DECL): Make secondary array static and const.
4320         (reg_names): Now const.
4321         (print_insn_arg): Arrays cacheFieldName and names now const.
4322         (print_indexed): Array scales now const.
4323
4324 Tue Mar  7 16:41:21 1995  Ian Lance Taylor  <ian@cygnus.com>
4325
4326         * ppc-opc.c: Sort recently added instructions by minor opcode
4327         number within major opcode number.
4328
4329 Mon Mar  6 10:04:36 1995  Jeff Law  (law@snake.cs.utah.edu)
4330
4331         * hppa-dis.c: Include libhppa.h.
4332
4333 Fri Feb 24 19:15:36 1995  Ian Lance Taylor  <ian@cygnus.com>
4334
4335         * mips-opc.c: Change dli to use M_DLI, and add dla.
4336
4337 Mon Feb 20 23:54:38 1995  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
4338
4339         * Makefile.in (ALL_MACHINES):  Add w65-dis.o.
4340
4341 Thu Feb 16 17:34:41 1995  Ian Lance Taylor  <ian@cygnus.com>
4342
4343         * mips-opc.c: Add r4650 mul instruction.
4344
4345 Wed Feb 15 15:45:20 1995  Ian Lance Taylor  <ian@cygnus.com>
4346
4347         * mips-opc.c: Add uld and usd macros for unaligned double load and
4348         store.
4349
4350 Tue Feb 14 13:17:37 1995  Michael Meissner  <meissner@tiktok.cygnus.com>
4351
4352         * ppc-opc.c (powerpc_opcodes): Add 403GA opcodes rfci, dccci,
4353         mfdcr, mtdcr, icbt, iccci.
4354
4355 Thu Feb  9 12:28:13 1995  Stan Shebs  <shebs@andros.cygnus.com>
4356
4357         * i960-dis.c (struct tabent, struct sparse_tabent): Change the
4358         signed char fields to shorts, more portable.
4359
4360 Wed Feb  8 17:29:29 1995  Stan Shebs  <shebs@andros.cygnus.com>
4361
4362         * i960-dis.c (struct tabent, struct sparse_tabent): Declare the
4363         char fields as signed chars, since they may have negative values.
4364
4365 Mon Feb  6 10:52:06 1995  J.T. Conklin  <jtc@rtl.cygnus.com>
4366
4367         * i386-dis.c (dis386_twobyte): Add cpuid, From Charles Hannum
4368           (mycroft@netbsd.org).
4369
4370 Mon Jan 30 12:38:00 1995  Ian Lance Taylor  <ian@cygnus.com>
4371
4372         From "Logg, Ed" <elogg@ea.com>:
4373         * ppc-opc.c (extract_bdm): Correct parenthezisation.
4374         * ppc-dis.c (print_insn_powerpc): Print .long before unrecognized
4375         value.
4376
4377 Thu Jan 26 18:32:08 1995  Ian Lance Taylor  <ian@cygnus.com>
4378
4379         * ppc-opc.c: Changes based on patch from David Edelsohn
4380         <edelsohn@mhpcc.edu>.
4381         (powerpc_operands): Add operands SPRBAT and SPRG. Split TBR out of
4382         SPR.
4383         (FXM_MASK): Define.
4384         (insert_tbr): New static function.
4385         (extract_tbr): New static function.
4386         (XFXFXM_MASK, XFXM): Define.
4387         (XSPRBAT_MASK, XSPRG_MASK): Define.
4388         (powerpc_opcodes): Add instructions to access special registers by
4389         name.  Add mtcr and mftbu.
4390
4391 Tue Jan 17 10:56:43 1995  Ian Lance Taylor  <ian@sanguine.cygnus.com>
4392
4393         * mips-opc.c (P3): Define.
4394         (mips_opcodes): Add mad and madu.
4395
4396 Sun Jan 15 16:32:59 1995  Steve Chamberlain  <sac@splat>
4397
4398         * configure.in: Add W65 support.
4399         * disassemble.c: Likewise.
4400         * w65-opc.h, w65-dis.c: New files.
4401
4402 Wed Dec 28 22:15:33 1994  Steve Chamberlain  (sac@jonny.cygnus.com)
4403
4404         * h8300-dis.c (bfd_h8_disassemble): Add support for 2 bit
4405         immediates.
4406
4407 Tue Dec 20 11:25:12 1994  Ian Lance Taylor  <ian@sanguine.cygnus.com>
4408
4409         * mips-opc.c: Add dli as a synonym for li.
4410
4411 Thu Dec  8 18:23:31 1994  Ken Raeburn  <raeburn@cujo.cygnus.com>
4412
4413         * alpha-dis.c (print_insn_alpha): Handle call_pal instruction, and
4414         print something for reserved opcode values, even if it won't
4415         assemble again.
4416
4417         * mips-dis.c (_print_insn_mips): When initializing, shift right
4418         and mask, to avoid sign extension problems on the Alpha.
4419
4420         * m68k-dis.c (print_insn_arg, case 'J'): Handle buscr and pcr
4421         control registers.
4422
4423 Wed Nov 23 22:34:51 1994  Steve Chamberlain  (sac@jonny.cygnus.com)
4424
4425         * sh-opc.h (mov.l gbr): Get direction right.
4426         * sh-dis.c (print_insn_shx): New function.
4427         (print_insn_shl, print_insn_sh): Call print_insn_shx to
4428         print opcodes with right byte order.
4429
4430 Thu Nov  3 19:32:22 1994  Ken Raeburn  <raeburn@cujo.cygnus.com>
4431
4432         * ns32k-dis.c (struct ns32k_option): Renamed from struct option,
4433         to avoid conflicts with getopt.
4434
4435 Mon Oct 31 18:48:10 1994  Ian Lance Taylor  <ian@sanguine.cygnus.com>
4436
4437         * hppa-dis.c (print_insn_hppa): Read the instruction using
4438         bfd_getb32, so that it works on a little endian or 64 bit host.
4439         Remove unused local variable op.
4440
4441 Tue Oct 25 17:07:57 1994  Ian Lance Taylor  <ian@sanguine.cygnus.com>
4442
4443         * mips-opc.c: Use or instead of addu for pseudo-op move, since
4444         addu does not work correctly if -mips3.
4445
4446 Wed Oct 19 13:40:16 1994  Ian Lance Taylor  <ian@sanguine.cygnus.com>
4447
4448         * a29k-dis.c (print_special): Add special register names defined
4449         on 29030, 29040 and 29050.
4450         (print_insn): Handle new operand type 'I'.
4451
4452 Wed Oct 12 11:59:55 1994  Ian Lance Taylor  <ian@sanguine.cygnus.com>
4453
4454         * Makefile.in (INSTALL): Use top level install.sh script.
4455
4456 Wed Oct  5 19:16:29 1994  Ian Lance Taylor  <ian@sanguine.cygnus.com>
4457
4458         * sparc-dis.c: Rewrite to use bitfields, rather than a union, so
4459         that it works on a little endian host.
4460
4461 Tue Oct  4 12:14:21 1994  Ian Lance Taylor  <ian@sanguine.cygnus.com>
4462
4463         * configure.in: Use ${config_shell} when running config.bfd.
4464
4465 Wed Sep 21 18:49:12 1994  Ian Lance Taylor  (ian@sanguine.cygnus.com)
4466
4467         * mips-opc.c (mips_opcodes): "dabs" is only available with -mips3.
4468
4469 Thu Sep 15 16:30:22 1994  Ian Lance Taylor  (ian@sanguine.cygnus.com)
4470
4471         * a29k-dis.c (print_insn): Print the opcode.
4472
4473 Wed Sep 14 17:52:14 1994  Ian Lance Taylor  (ian@sanguine.cygnus.com)
4474
4475         * mips-opc.c (mips_opcodes): Set WR_t for sc and scd.
4476
4477 Sun Sep 11 22:32:17 1994  Jeff Law  (law@snake.cs.utah.edu)
4478
4479         * hppa-dis.c (reg_names): Use r26-r23 for arg0-arg3.
4480
4481 Tue Sep  6 11:37:12 1994  Ian Lance Taylor  (ian@sanguine.cygnus.com)
4482
4483         * mips-opc.c: Set INSN_STORE_MEMORY flag for all instructions
4484         which store a value into memory.
4485
4486 Sun Sep 04 17:58:10 1994  Richard Earnshaw (rwe@pegasus.esprit.ec.org)
4487
4488         * configure.in, Makefile.in, disassemble.c: Add support for the ARM.
4489         * arm-dis.c, arm-opc.h: New files.
4490
4491 Fri Aug  5 14:00:05 1994  Stan Shebs  (shebs@andros.cygnus.com)
4492
4493         * Makefile.in (ns32k-dis.o): Add dependency.
4494         * ns32k-dis.c (print_insn_arg): Declare initialized local as
4495         string, not as array of chars.
4496
4497 Thu Jul 28 18:14:16 1994  Ken Raeburn  (raeburn@cujo.cygnus.com)
4498
4499         * sparc-dis.c (print_insn_sparc): Handle new operand type 'x'.
4500
4501         * sparc-opc.c: Added sparclite extended FP operations, and
4502         versions of v9 impdep* instructions permitting specification of
4503         the OPF field.
4504
4505 Tue Jul 26 16:36:03 1994  Ken Raeburn  (raeburn@cujo.cygnus.com)
4506
4507         * i960-dis.c (reg_names): Now const.
4508         (struct sparse_tabent): New type, copied from array type in mem
4509         function.
4510         (ctrl): Local static array ctrl_tab now const.
4511         (cobr): Local static array cobr_tab now const.
4512         (mem): Local variables reg1, reg2, reg3 now point to const.  Local
4513         static variable mem_tab no longer explicitly initialized.  Changed
4514         mem_init to const array of struct sparse_tabent.
4515         (reg): Local static variable reg_tab no longer explicitly
4516         initialized.  Changed reg_init to const array of struct
4517         sparse_tabent.
4518         (ea): Local static array scale_tab now const.
4519
4520         * i960-dis.c (reg): Added i960JX instructions to reg_init table.
4521         (REG_MAX): Updated.
4522
4523 Tue Jul 19 21:00:00 1994  DJ Delorie (dj@ctron.com)
4524
4525         * configure.bat: the disassember needs to be enabled for
4526         "objdump -d" to work in djgpp.
4527
4528 Wed Jul 13 18:01:58 1994  Ken Raeburn  (raeburn@cujo.cygnus.com)
4529
4530         * ns32k-dis.c: Deleted all code in "#ifdef GDB".
4531         (invalid_float): Enabled general version, doesn't require running
4532         on ns32k host.  Changed to take char* argument, and test for
4533         explicitly specified sizes, instead of using sizeof() on host CPU
4534         types.
4535         (INVALID_FLOAT): Cast first argument.
4536         (opt_u, opt_U, opt_O, opt_C, opt_S, list_P532, list_M532,
4537         list_P032, list_M032): Now const.
4538         (optlist, list_search): Made appropriate arguments now point to
4539         const.
4540         (print_insn_arg): Changed static array of one-character-string
4541         pointers into a static const array of characters; fixed sprintf
4542         statement accordingly.
4543
4544 Sun Jul 10 00:27:47 1994  Ian Dall  (dall@hfrd.dsto.gov.au)
4545
4546         * opcodes/ns32k-dis.c: Semi-new file.  Had apparently been dropped
4547         from distribution. A ns32k-dis.c from a previous distribution has
4548         been brought up to date and supports the new interface.
4549
4550         * disassemble.c: define ARCH_ns32k and add case bfd_arch_ns32k.
4551
4552         * configure.in: add bfd_ns32k_arch target support.
4553
4554         * Makefile.in: add ns32k-dis.o to ALL_MACHINES.
4555         Add ns32k-dis.c to CFILES. Add dependencies for ns32k-dis.o.
4556
4557 Wed Jun 29 22:10:37 1994  Steve Chamberlain  (sac@cygnus.com)
4558
4559         * h8300-dis.c (bfd_h8_disassemble): Get 16bit branch
4560         disassembly right.
4561
4562 Tue Jun 28 13:22:06 1994  Stan Shebs  (shebs@andros.cygnus.com)
4563
4564         * h8300-dis.c, mips-dis.c: Don't use true and false.
4565
4566 Thu Jun 23 12:53:19 1994  David J. Mackenzie  (djm@rtl.cygnus.com)
4567
4568         * configure.in: Change --with-targets to --enable-targets.
4569
4570 Wed Jun 22 13:38:32 1994  Ian Lance Taylor  (ian@sanguine.cygnus.com)
4571
4572         * mips-dis.c (_print_insn_mips): Build a static hash table mapping
4573         opcodes to the first instruction with that opcode, to speed
4574         disassembly of large files.  From ralphc@pyramid.com (Ralph
4575         Campbell).
4576
4577 Tue Jun  7 12:49:44 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
4578
4579         * Makefile.in (mostlyclean): Fix typo (was mostyclean).
4580
4581 Wed May 11 22:32:00 1994  DJ Delorie (dj@ctron.com)
4582
4583         * configure.bat: update to latest makefile.in
4584
4585 Sat May  7 17:13:21 1994  Steve Chamberlain  (sac@cygnus.com)
4586
4587         * a29k-dis.c (print_insn): Print 'x' type operand in hex.
4588         * h8300-dis.c (bfd_h8_disassemble): Print 16bit rels correctly.
4589         * sh-dis.c (print_insn_sh): Don't recur endlessly if delay
4590         slot insn is in a delay slot.
4591         * z8k-opc.h: (resflg): Fix patterns.
4592         * h8500-opc.h Fix CR insn patterns.
4593
4594 Fri May  6 14:34:46 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
4595
4596         * ppc-opc.c (powerpc_opcodes): Put PowerPC versions of "cmp" and
4597         "cmpl" before POWER versions, so that gas -many uses them.
4598
4599 Thu Apr 28 18:32:36 1994  Ken Raeburn  (raeburn@cujo.cygnus.com)
4600
4601         * disassemble.c: New file.
4602         * Makefile.in (OFILES): Add disassemble.o.
4603         (disassemble.o): Provide dependencies; compile with $(ARCHDEFS).
4604         * configure.in: Define ARCHDEFS in Makefile.  Code taken from
4605         binutils/configure.in.
4606
4607         * m68k-dis.c (print_insn_m68k): If F_ALIAS flag is set, skip the
4608         opcode being examined.
4609
4610 Thu Apr 21 17:08:40 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
4611
4612         * ppc-opc.c (powerpc_operands): Added RAL, RAM and RAS.
4613         (insert_ral, insert_ram, insert_ras): New functions.
4614         (powerpc_opcodes): Use RAL for load with update, RAM for lmw, and
4615         RAS for store with update.
4616
4617 Sat Apr 16 23:41:44 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
4618
4619         * ppc-opc.c (powerpc_opcodes): Correct fcir.  From David Edelsohn
4620         (edelsohn@npac.syr.edu).
4621
4622 Wed Apr  6 17:11:45 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
4623
4624         * mips-opc.c (mips_opcodes): Correct operands of "nor" with an
4625         immediate argument.
4626
4627 Mon Apr  4 16:30:46 1994  Doug Evans  (dje@canuck.cygnus.com)
4628
4629         * sparc-opc.c (sparc_opcodes): Fix "rd %fprs,%l0".
4630
4631 Mon Apr  4 13:22:00 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
4632
4633         * ppc-opc.c (powerpc_operands): The signedp field has been
4634         removed, so don't initialize it.  Set the PPC_OPERAND_SIGNED flag
4635         instead.  Add new operand SISIGNOPT.
4636         (powerpc_opcodes): For lis, liu, addis, and cau use SISIGNOPT.
4637         Based on patch from David Edelsohn (edelsohn@npac.syr.edu).
4638         * ppc-dis.c (print_insn_powerpc): Check PPC_OPERAND_SIGNED rather
4639         than signedp field.
4640
4641 Wed Mar 30 00:31:49 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
4642
4643         * i386-dis.c (struct private):  Renamed to dis_private. `private'
4644         is a reserved word for dynix cc.
4645
4646 Mon Mar 28 13:00:15 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
4647
4648         * configure.in: Change error message to refer to bfd/config.bfd
4649         rather than bfd/configure.in.
4650
4651 Mon Mar 28 12:28:30 1994  David Edelsohn  (edelsohn@npac.syr.edu)
4652
4653         * ppc-opc.c: Define POWER2 as short alias flag.
4654         (powerpc_opcodes): Add POWER/2 opcodes lfq*, stfq*, fcir[z], and
4655         fsqrt.
4656
4657 Wed Mar 23 12:23:05 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
4658
4659         * i960-dis.c (print_insn_i960): Don't read a second word for
4660         opcodes 0, 1, 2 and 3.
4661
4662 Wed Mar 16 15:37:58 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
4663
4664         * configure.in: Don't build m68881-ext.o for bfd_m68k_arch.
4665
4666 Mon Mar 14 14:53:50 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
4667
4668         * m68881-ext.c: Removed; no longer used.
4669         * Makefile.in: Changed accordingly.
4670
4671         * m68k-dis.c (ext_format_68881): Don't declare.
4672         (print_insn_m68k): If an instruction uses place 'i', it uses at
4673         least four fixed bytes.
4674         (print_insn_arg): Don't bump p by 2 for case 'I', place 'i'.  For
4675         extended float, convert to double using floatformat_to_double, not
4676         ieee_extended_to_double, and fetch the data before converting it.
4677
4678 Tue Mar  8 18:12:25 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
4679
4680         * mips-opc.c: It's sqrt.s, not sqrt.w.  From
4681         davidj@ICSI.Berkeley.EDU (David Johnson).
4682
4683 Tue Feb  8 16:55:27 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
4684
4685         * ppc-opc.c (powerpc_opcodes): The POWER uses bdn[l][a] where the
4686         PowerPC uses bdnz[l][a].
4687
4688 Tue Feb  8 00:32:28 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
4689
4690         * dis-buf.c, i386-dis.c:  Include sysdep.h.
4691
4692 Mon Feb  7 19:22:23 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
4693
4694         * configure.in (bfd_powerpc_arch): Use ppc-dis.o and ppc-opc.o.
4695
4696         * ppc-opc.c (powerpc_opcodes): Mark POWER instructions supported
4697         by Motorola PowerPC 601 with PPC_OPCODE_601.
4698         * ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc):
4699         Disassemble Motorola PowerPC 601 instructions as well as normal
4700         PowerPC instructions.
4701
4702 Sun Feb  6 07:45:17 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
4703
4704         * i960-dis.c (reg, mem): Just use a static array instead of
4705         calling xmalloc.
4706
4707 Sat Feb  5 00:04:02 1994  Jeffrey A. Law  (law@snake.cs.utah.edu)
4708
4709         * hppa-dis.c (print_insn_hppa): For '?' and '@' only adjust the
4710         condition name index if this is for a negated condition.
4711
4712         * hppa-dis.c (print_insn_hppa): No space before 'H' operand.
4713         Floating point format for 'H' operand is backwards from normal
4714         case (0 == double, 1 == single).  For '4', '6', '7', '9', and '8'
4715         operands (fmpyadd and fmpysub), handle bizarre register
4716         translation correctly for single precision format.
4717
4718         * hppa-dis.c (print_insn_hppa): Do not emit a space after 'F'
4719         or 'I' operands if the next format specifier is 'M' (fcmp
4720         condition completer).
4721
4722 Feb  4 23:38:03 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
4723
4724         * ppc-opc.c (powerpc_operands): New operand type MBE to handle a
4725         single number giving a bitmask for the MB and ME fields of an M
4726         form instruction.  Change NB to accept 32, and turn it into 0;
4727         also turn 0 into 32 when disassembling.  Seperated SH from NB.
4728         (insert_mbe, extract_mbe): New functions.
4729         (insert_nb, extract_nb): New functions.
4730         (SC_MASK): Mask out SA and LK bits.
4731         (powerpc_opcodes): Change "cal" to use RT, D, RA rather than RT,
4732         RA, SI.  Change "liu" and "cau" to use UI rather than SI.  Mark
4733         "bctr" and "bctrl" as accepted by POWER.  Change "rlwimi",
4734         "rlimi", "rlwimi.", "rlimi.", "rlwinm", "rlinm", "rlwinm.",
4735         "rlinm.", "rlmi", "rlmi.", "rlwnm", "rlnm", "rlwnm.", "rlnm." to
4736         use MBE rather than MB.  Add "mfmq" and "mtmq" POWER instructions.
4737         (powerpc_macros): Define table of macro definitions.
4738         (powerpc_num_macros): Define.
4739
4740         * ppc-dis.c (print_insn_powerpc): Don't skip optional operands
4741         if PPC_OPERAND_NEXT is set.
4742
4743 Sat Jan 22 23:10:07 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
4744
4745         * i960-dis.c (print_insn_i960): Make buffer bfd_byte instead of
4746         char.  Retrieve contents using bfd_getl32 instead of shifting.
4747
4748 Fri Jan 21 19:01:39 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
4749
4750         * ppc-opc.c: New file.  Opcode table for PowerPC, including
4751         opcodes for POWER (RS/6000).
4752         * ppc-dis.c: New file.  PowerPC and Power (RS/6000) disassembler.
4753         * Makefile.in (ALL_MACHINES): Add ppc-dis.o and ppc-opc.o.
4754         (CFILES): Add ppc-dis.c.
4755         (ppc-dis.o, ppc-opc.o): New targets.
4756         * configure.in: Build ppc-dis.o and ppc-opc.o for bfd_rs6000_arch.
4757
4758 Mon Jan 17 20:05:49 1994  Jeffrey A. Law  (law@snake.cs.utah.edu)
4759
4760         * hppa-dis.c (print_insn_hppa): Handle 'N' in assembler template.
4761         No space before 'u', 'f', or 'N'.
4762
4763 Sun Jan 16 14:20:16 1994  Jim Kingdon  (kingdon@deneb.cygnus.com)
4764
4765         * i386-dis.c (print_insn_i386): Add FIXME comment regarding reading
4766         farther than we should.
4767
4768         * i386-dis.c (dis386): Use Yb and Yv for scasb and scasS.
4769
4770 Thu Jan  6 12:38:05 1994  David J. Mackenzie  (djm@thepub.cygnus.com)
4771
4772         * sparc-dis.c m68k-dis.c alpha-dis.c a29k-dis.c: Fix comments.
4773
4774 Wed Jan  5 11:56:21 1994  David J. Mackenzie  (djm@thepub.cygnus.com)
4775
4776         * i960-dis.c (print_insn_i960): Only read word2 if the instruction
4777         needs it, to prevent reading past the end of a section.
4778
4779 Wed Nov 17 17:20:12 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
4780
4781         * mips-opc.h: Use macro for j instruction, to support SVR4 PIC.
4782         Removed t,A case for la; always use t,A(b) case.
4783
4784 Mon Nov  8 12:37:36 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
4785
4786         From Ted Lemen <mellon@pepper.ncd.com>
4787         * mips-dis.c (print_insn_arg): Handle 'k'.
4788         * mips-opc.c: Make cache use k, not t.
4789
4790 Sun Nov  7 23:52:34 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
4791
4792         * alpha-opc.h, alpha-dis.c (print_insn_alpha):  Add
4793         FLOAT_MEMORY_FORMAT_CODE, FLOAT_BRANCH_FORMAT_CODE, correct
4794         FLOAT_FORMAT_CODE to put out floating point register names.
4795
4796 Mon Nov  1 18:17:51 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
4797
4798         * mips-opc.c: Use macros for jal variants, to support SVR4 PIC.
4799
4800 Thu Oct 28 17:42:23 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
4801
4802         * a29k-dis.c (print_insn): Use 0x%08x, not 0x%8x.
4803
4804 Wed Oct 27 11:48:01 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
4805
4806         * mips-opc.c (dsll, dsra, dsrl): Added '>' cases for shift counts
4807         larger than 32.  Moved dsxx32 variants first for disassembler.
4808
4809 Mon Oct 25 11:33:14 1993  Steve Chamberlain  (sac@phydeaux.cygnus.com)
4810
4811         * z8kgen.c, z8k-opc.h: Add full lda information.
4812
4813 Tue Oct 19 12:39:25 1993  Jeffrey A Law  (law@cs.utah.edu)
4814
4815         * hppa-dis.c (print_insn_hppa): Do not emit a space after
4816         movb instructions.  Any necessary space will be emitted by
4817         the code to handle nullification completers.
4818
4819 Wed Oct 13 16:19:07 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
4820
4821         * mips-opc.c: Moved l.d down so that it disassembles as ldc1.
4822
4823 Fri Oct  8 02:34:21 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
4824
4825         * alpha-opc.h:  Add ldl_l, fix typo for ldq_u.
4826         * alpha-dis.c (print_insn_alpha):  Add code for PAL_FORMAT_CODE.
4827
4828 Tue Oct  5 17:47:53 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
4829
4830         * mips-opc.c: Correct lwu opcode value (book had it wrong).
4831
4832 Thu Sep 30 11:26:18 1993  Steve Chamberlain  (sac@phydeaux.cygnus.com)
4833
4834         * z8k-dis.c (FETCH_DATA): get just the right amount of data.
4835         (unpack_instr): Cope with ARG_IMM4M1 type instructions.
4836
4837 Wed Sep 29 16:24:49 1993  K. Richard Pixley  (rich@sendai.cygnus.com)
4838
4839         * m88k-dis.c (m88kdis): comment change.  Remove space after
4840           printing mnemonic.
4841           (printop): handle new arg types DEC and XREG for m88110.
4842
4843 Tue Sep 28 19:20:16 1993  Jeffrey A Law (law@snake.cs.utah.edu)
4844
4845         * hppa-dis.c (print_insn_hppa): Handle 'z' operand
4846         type for absolute branch addresses.  Delete special
4847         "ble" and "be" code in 'W' operand code.
4848
4849 Fri Sep 24 14:08:33 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
4850
4851         * mips-opc.c: Set hazard information correctly for branch
4852         likely instructions.
4853
4854 Fri Sep 17 04:41:17 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
4855
4856         * alpha-dis.c (print_insn_alpha), alpha-opc.h:  Fix bugs, use
4857         info->fprintf_func for printing and info->print_address_func for
4858         address output.
4859
4860 Wed Sep 15 12:12:07 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
4861
4862         * mips-opc.c: Set INSN_TRAP for tXX instructions.
4863
4864 Thu Sep  9 10:11:27 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
4865
4866         * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson):
4867         Corrected second case of "b" for disassembler.
4868
4869 Tue Sep  7 14:25:15 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
4870
4871         * mips-dis.c, m88k-dis.c: Don't include libbfd.h.  Changed calls
4872         to BFD swapping routines to correspond to BFD name changes.
4873
4874 Thu Sep  2 10:35:25 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
4875
4876         * mips-opc.c: Change div machine instruction to be z,s,t rather
4877         than s,t.  Change div macro to be d,v,t rather than d,s,t.
4878         Likewise for divu, ddiv, ddivu.  Added z,s,t case for drem, dremu,
4879         rem and remu which generates only the corresponding div
4880         instruction.  This is for compatibility with the MIPS assembler,
4881         which only generates the simple machine instruction when an
4882         explicit destination of $0 is used.
4883         * mips-dis.c (print_insn_arg): Handle 'z' (always register zero).
4884
4885 Thu Aug 26 17:41:44 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
4886
4887         * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Set
4888         WR_31 hazard for bal, bgezal, bltzal.
4889
4890 Thu Aug 26 17:20:02 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
4891
4892         * hppa-dis.c (print_insn_hppa): Use print function
4893         from within the disassemble_info, not fprintf_filtered.
4894
4895 Wed Aug 25 13:51:40 1993  Ken Raeburn  (raeburn@cambridge.cygnus.com)
4896
4897         * hppa-dis.c (print_insn_hppa): Handle '|' like '>'.  (From Jeff
4898         Law, law@cs.utah.edu.)
4899
4900 Mon Aug 23 12:44:05 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
4901
4902         * mips-opc.c ("absu"): Removed.
4903         ("dabs"): Added.
4904
4905 Fri Aug 20 10:52:52 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
4906
4907         * mips-opc.c: Added r6000 and r4000 instructions and macros.
4908         Changed hazard information to distinguish between memory load
4909         delays and coprocessor load delays.
4910
4911 Wed Aug 18 15:39:23 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
4912
4913         * mips-opc.c: li.d uses "T,L", not "S,F".  Added li.s.
4914
4915 Tue Aug 17 09:44:42 1993  David J. Mackenzie  (djm@thepub.cygnus.com)
4916
4917         * configure.in: Don't pass cpu to config.bfd.
4918
4919 Tue Aug 17 12:23:52 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
4920
4921         * m88k-dis.c (m88kdis): Make class unsigned.
4922
4923 Thu Aug 12 15:08:18 1993  Ian Lance Taylor  (ian@cygnus.com)
4924
4925         * alpha-dis.c (print_insn_alpha): One branch format case was
4926         missing the instruction name.
4927
4928 Wed Aug 11 19:29:39 1993  David J. Mackenzie  (djm@thepub.cygnus.com)
4929
4930         * Makefile.in (ALL_MACHINES): Renamed from DIS_LIBS.
4931         Add the arch-specific auxiliary files.
4932         (OFILES): Remove the arch-specific auxiliary files
4933         and use BFD_MACHINES instead of DIS_LIBS.
4934         * configure.in: Set BFD_MACHINES based on --with-targets option.
4935
4936 Thu Aug 12 12:04:53 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
4937
4938         * mips-opc.c: Added lwc1 E,A(b) to go with lwc1 T,A(b).  Similarly
4939         for swc1.
4940
4941 Sun Aug  8 15:09:30 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
4942
4943         * sparc-opc.c: Change CONST to const to deal with gcc
4944         -Dconst=__const -traditional.
4945
4946 Fri Aug  6 10:58:55 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
4947
4948         * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Took
4949         coprocessor instructions out of #if 0, and made them use new
4950         argument type "C".
4951
4952 Thu Aug  5 17:11:06 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
4953
4954         * sparc-dis.c: Include ansidecl.h before opcodes/sparc.h.
4955
4956 Fri Jul 30 18:48:15 1993  John Gilmore  (gnu@cygnus.com)
4957
4958         * sparc-opc.c:  Add F_JSR, F_UNBR, or F_CONDBR flags to each branch
4959         instruction, for use by the disassembler.
4960
4961         * sparc-dis.c (SEX):  Add sign extension macro.  Replace many
4962         hand-coded sign extensions that depended on 32-bit host ints.
4963         FIXME, we still depend on big-endian host bitfield ordering.
4964         (sparc_print_insn):  Set the insn_info_valid field, and the
4965         other fields that describe the instruction being printed.
4966
4967 Tue Jul 27 17:04:58 1993  Jim Wilson  (wilson@sphagnum.cygnus.com)
4968
4969         * sparc-opc.c (call): Accept all 6 addressing modes valid for
4970         `jmp' instead of just one of them.
4971
4972 Wed Jul 21 11:43:32 1993  Jim Kingdon  (kingdon@deneb.cygnus.com)
4973
4974         * hppa-dis.c: Move floating registers from reg_names to fp_reg_names.
4975         (fput_fp_reg_r): Renamed from fput_reg_r.
4976         (fput_fp_reg): New function.
4977         (print_insn_hppa): Use fput_fp_reg{,_r} where appropriate.
4978
4979         * hppa-dis.c (print_insn_hppa, cases 'a', 'd'): Print space afterwards.
4980
4981         * hppa-dis.c (print_insn_hppa, case 'd'): Use GET_COND not GET_FIELD.
4982
4983 Mon Jul 19 13:52:21 1993  Jim Kingdon  (kingdon@deneb.cygnus.com)
4984
4985         * hppa-dis.c (print_insn_hppa): Use extract_5r_store for 'r'.
4986
4987         * hppa-dis.c (print_insn_hppa, case '>'): If next character is 'n',
4988         don't output a space.
4989
4990         * hppa-dis.c (float_format_names): 10 is undefined, and 11 is quad.
4991
4992 Sun Jul 18 16:30:02 1993  Jim Kingdon  (kingdon@rtl.cygnus.com)
4993
4994         * mips-opc.c: New file, containing opcode table from
4995         ../include/opcode/mips.h.
4996         * Makefile.in: Add it.
4997
4998 Thu Jul 15 12:37:05 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
4999
5000         * m88k-dis.c: New file, moved in from gdb and changed to use the
5001         new dis-asm.h disassembler interface.
5002         * Makefile.in (DIS_LIBS): Added m88k-dis.o.
5003         (m88k-dis.o): New target.
5004
5005 Tue Jul 13 10:04:16 1993  Ian Lance Taylor  (ian@cygnus.com)
5006
5007         * mips-dis.c (print_insn_arg, _print_insn_mips): Made pointer to
5008         argument string const char * to correspond to opcode/mips.h.
5009
5010 Tue Jul  6 15:18:37 1993  Ian Lance Taylor  (ian@cygnus.com)
5011
5012         * mips-dis.c: Updated to account for name changes in new version
5013         of opcode/mips.h.
5014         * Makefile.in: Added header file dependencies.
5015
5016 Sat Jul  3 23:47:56 1993  Doug Evans  (dje@canuck.cygnus.com)
5017
5018         * h8300-dis.c (bfd_h8_disassemble): Correct fetching of instruction.
5019
5020 Thu Jul  1 12:23:38 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
5021
5022         * m68k-dis.c (NEXTWORD, NEXTLONG): Use ((x) ^ 0x8000) - 0x8000 to sign
5023         extend, rather than shifts.
5024
5025 Sun Jun 20 20:56:56 1993  Ken Raeburn  (raeburn@poseidon.cygnus.com)
5026
5027         * Makefile.in: Undo 15 June change.
5028
5029 Fri Jun 18 14:15:15 1993  Per Bothner  (bothner@deneb.cygnus.com)
5030
5031         * m68k-dis.c (print_insn_arg):  Change return value to byte count
5032         or error code.
5033         * m68k-dis.c:  Re-write to detect invalid operands before
5034         printing anything, so we can handle this the same way we
5035         handle invalid opcodes.
5036
5037 Thu Jun 17 15:01:36 1993  Steve Chamberlain  (sac@phydeaux.cygnus.com)
5038
5039         * sh-dis.c, sh-opc.h: Understand some more opcodes.
5040
5041 Wed Jun 16 13:48:05 1993  Ian Lance Taylor  (ian@cygnus.com)
5042
5043         * hppa-dis.c: Include <ansidecl.h> and sysdep.h before other
5044         header files.
5045
5046 Tue Jun 15 21:45:26 1993  Ken Raeburn  (raeburn@cambridge.cygnus.com)
5047
5048         * sparc-dis.c: Don't declare qsort, since sysdep.h might.
5049
5050         * configure.in: Do make sysdep.h link.
5051         * Makefile.in: Search ../include.  Don't search ../bfd.
5052
5053 Tue Jun 15 13:36:10 1993  Stu Grossman  (grossman@cygnus.com)
5054
5055         Changes from Jeff Law, law@cs.utah.edu:
5056         * hppa-dis.c: Fix typo.  'a' and 'd' were reversed.
5057         Do not print a space before the completers specified by
5058         'a' and 'd'.
5059
5060 Fri Jun 11 18:40:21 1993  Ken Raeburn  (raeburn@cygnus.com)
5061
5062         * mips-dis.c: No longer need to bomb out if HOST_64_BIT is
5063         defined, since gdb has been fixed.
5064
5065         Changes from Jeff Law, law@cs.utah.edu:
5066         * hppa-dis.c (print_insn_hppa): Last argument to fput_reg,
5067         fput_reg_r, fput_creg, fput_const, and fputs_filtered should
5068         be a *disassemble_info, not a *FILE.
5069         * hppa-dis.c: Support 'd', '!', and 'a'.
5070         * hppa-dis.c: Support 's' to extract a 2 bit space register.
5071         * hppa-dis.c: Delete cases which are no longer needed.
5072
5073 Fri Jun 11 07:53:48 1993  Jim Kingdon  (kingdon@cygnus.com)
5074
5075         * m68k-dis.c (print_insn_{m68k,arg}): Add MMU codes.
5076
5077 Tue Jun  8 12:25:01 1993  Steve Chamberlain  (sac@phydeaux.cygnus.com)
5078
5079         * h8300-dis.c: New file, removed from bfd/cpu-h8300.c, with
5080         H8/300-H opcodes.
5081
5082 Mon Jun  7 12:58:49 1993  Per Bothner  (bothner@rtl.cygnus.com)
5083
5084         * Makefile.in (CSEARCH): Add -I../bfd for sysdep.h and bfd.h.
5085         * configure.in:  No longer need to configure to get sysdep.h.
5086
5087 Thu Jun  3 15:56:49 1993  Stu Grossman  (grossman@cygnus.com)
5088
5089         * Patches from Jeffrey Law <law@cs.utah.edu>.
5090         * hppa-dis.c: Support 'I', 'J', and 'K' in output
5091         templates for 1.1 FP computational instructions.
5092
5093 Tue May 25 13:05:48 1993  Ken Raeburn  (raeburn@cambridge.cygnus.com)
5094
5095         * h8500-dis.c (print_insn_h8500): Address argument is type
5096         bfd_vma.
5097         * z8k-dis.c (print_insn_z8k, print_insn_z8001, print_insn_z8002):
5098         Ditto.
5099
5100         * h8500-opc.h (addr_class_type): No comma at end of enumerator.
5101         * sh-opc.h (sh_nibble_type, sh_arg_type): Ditto.
5102
5103         * sparc-dis.c (compare_opcodes): Move static declaration to
5104         top-level.
5105
5106 Fri May 21 14:17:37 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
5107
5108         * sparc-dis.c (print_insn_sparc): Implement 'n' argument for unimp
5109         instruction, remove unimp hack from 'l' argument.
5110
5111 Wed May 19 15:35:54 1993  Stu Grossman  (grossman@cygnus.com)
5112
5113         * z8k-dis.c (fetch_data):  Use unsigned char to make ancient gcc's
5114         happy.
5115
5116 Fri May 14 15:22:46 1993  Ian Lance Taylor  (ian@cygnus.com)
5117
5118         * Based on patches from davidj@ICSI.Berkeley.EDU (David Johnson):
5119         * mips-dis.c (print_insn_arg): Handle 'C' for general coprocessor
5120         instructions.
5121
5122 Fri May 14 00:09:14 1993  Ken Raeburn  (raeburn@cambridge.cygnus.com)
5123
5124         * hppa-dis.c: Include dis-asm.h before sysdep.h.  Changed some
5125         arrays of string pointers to 2-d arrays of chars, to save
5126         space.
5127
5128 Thu May  6 20:51:17 1993  Fred Fish  (fnf@cygnus.com)
5129
5130         * a29k-dis.c, alpha-dis.c, i960-dis.c, sparc-dis.c, z8k-dis.c:
5131         Cast second arg to read_memory_func to "bfd_byte *", as necessary.
5132
5133 Tue May  4 20:31:10 1993  Ken Raeburn  (raeburn@cambridge.cygnus.com)
5134
5135         * hppa-dis.c: New file from Utah, adapted to new disassembler
5136         calling interface.
5137         * Makefile.in: Include it.
5138
5139 Mon Apr 26 18:17:42 1993  Steve Chamberlain  (sac@thepub.cygnus.com)
5140
5141         * sh-dis.c, sh-opc.h: New files.
5142
5143 Fri Apr 23 18:51:22 1993  Steve Chamberlain  (sac@thepub.cygnus.com)
5144
5145         * alpha-dis.c, alpha-opc.h: New files.
5146
5147 Tue Apr  6 12:54:08 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
5148
5149         * mips-dis.c: Sign extend 'j' and 'b' arguments, delta is a signed
5150         value.
5151
5152 Mon Apr  5 17:37:37 1993  John Gilmore  (gnu@cygnus.com)
5153
5154         * sparc-dis.c: Make "ta" the default trap instruction, "t" the alias.
5155
5156 Fri Apr  2 07:24:27 1993  Ian Lance Taylor  (ian@cygnus.com)
5157
5158         * a29k-dis.c, sparc-dis.c, sparc-opc.c: Use CONST rather than
5159         const.
5160
5161 Thu Apr  1 11:20:43 1993  Jim Kingdon  (kingdon@cygnus.com)
5162
5163         * sparc-dis.c: Use fprintf_func a few places where I forgot,
5164         and double percent signs a few places.
5165
5166         * a29k-dis.c, i960-dis.c: New, merged from gdb and binutils.
5167
5168         * i386-dis.c, m68k-dis.c, mips-dis.c, sparc-dis.c:
5169         Use info->print_address_func not print_address.
5170
5171         * dis-buf.c (generic_print_address): New function.
5172
5173 Wed Mar 31 10:07:04 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
5174
5175         * Makefile.in: Add sparc-dis.c.
5176         sparc-dis.c: New file, merges binutils and gdb versions as follows:
5177         From GDB:
5178             Add `add' instruction to the set that get checked
5179             for a preceding `sethi' in order to print an absolute address.
5180             * (print_insn):  Disassembly prefers real instructions.
5181             (is_delayed_branch):  Speed up.
5182             * sparc-opcode.h: Add ALIAS bit to aliases.  Fix up opcode tables.
5183             Still missing some float ops, and needs testing.
5184             * sparc-pinsn.c (print_insn): Eliminate 'set' test, subsumed by
5185             F_ALIAS.  Use printf, not fprintf, when not passing a file
5186             pointer...
5187             (compare_opcodes): Check that identical instructions have
5188             identical opcodes, complain otherwise.
5189         From binutils:
5190             * New 'm' arg.
5191             * Include reg_names.
5192         From neither:
5193             Use dis-asm.h/read_memory_func interface.
5194
5195 Wed Mar 31 20:49:06 1993  K. Richard Pixley  (rich@rtl.cygnus.com)
5196
5197         * h8500-dis.c, i386-dis.c, m68k-dis.c, z8k-dis.c (fetch_data):
5198           deliberately return non-zero to setjmp from longjmp.  Otherwise
5199           this code fails to compile.
5200
5201 Wed Mar 31 17:04:31 1993  Stu Grossman  (grossman@cygnus.com)
5202
5203         * m68k-dis.c:  Fix prototype for fetch_arg().
5204
5205 Wed Mar 31 10:07:04 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
5206
5207         * dis-buf.c: New file, for new read_memory_func interface.
5208         Makefile.in (OFILES): Include it.
5209         m68k-dis.c, i386-dis.c, h8500-dis.c, mips-dis.c, z8k-dis.c:
5210         Use new read_memory_func interface.
5211
5212 Mon Mar 29 14:02:17 1993  Steve Chamberlain  (sac@thepub.cygnus.com)
5213
5214         * h8500-dis.c (print_insn_h8500): Get sign of fp offsets right.
5215         * h8500-opc.h: Fix couple of opcodes.
5216
5217 Wed Mar 24 02:03:36 1993  david d `zoo' zuhn  (zoo at poseidon.cygnus.com)
5218
5219         * Makefile.in: add dvi & installcheck targets
5220
5221 Mon Mar 22 18:55:04 1993  John Gilmore  (gnu@cygnus.com)
5222
5223         * Makefile.in:  Update for h8500-dis.c.
5224
5225 Fri Mar 19 14:27:17 1993  Steve Chamberlain  (sac@thepub.cygnus.com)
5226
5227         * h8500-dis.c, h8500-opc.h: New files
5228
5229 Thu Mar 18 14:12:37 1993  Per Bothner  (bothner@rtl.cygnus.com)
5230
5231         * mips-dis.c, z8k-dis.c:  Converted to use interface defined in
5232         ../include/dis-asm.h.
5233         * m68k-dis.c:  New file (merge of ../binutils/m68k-pinsn.c
5234         and ../gdb/m68k-pinsn.c).
5235         * i386-dis.c:  New file (merge of ../binutils/i386-pinsn.c
5236         and ../gdb/i386-pinsn.c).
5237         * m68881-ext.c:  New file.  Moved definition of
5238         ext_format ext_format_68881 from ../gdb/m68k-tdep.c.
5239         * Makefile.in:  Adjust for new files.
5240         * i386-dis.c:  Patches from John Hassey (hassey@dg-rtp.dg.com).
5241         * m68k-dis.c:  Recognize '9' placement code, so (say) pflush
5242         can be dis-assembled.
5243
5244 Wed Feb 17 09:19:47 1993  Ken Raeburn  (raeburn@cambridge.cygnus.com)
5245
5246         * mips-dis.c (print_insn_arg): Now returns void.
5247
5248 Mon Jan 11 16:09:16 1993  Fred Fish  (fnf@cygnus.com)
5249
5250         * mips-dis.c (ansidecl.h):  Include for benefit of sysdep.h
5251         files that use the macros.
5252
5253 Thu Jan  7 13:15:17 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
5254
5255         * mips-dis.c: New file, from gdb/mips-pinsn.c.
5256         * Makefile.in (DIS_LIBS): Added mips-dis.o.
5257         (CFILES): Added mips-dis.c.
5258
5259 Thu Jan  7 07:36:33 1993  Steve Chamberlain  (sac@thepub.cygnus.com)
5260
5261         * z8k-dis.c (print_insn_z8001, print_insn_z8002): new routines
5262         * z8kgen.c, z8k-opc.h: fix sizes of some shifts.
5263
5264 Tue Dec 22 15:42:44 1992  Per Bothner  (bothner@rtl.cygnus.com)
5265
5266         * Makefile.in:  Improve *clean rules.
5267         * configure.in:  Allow a default host.
5268
5269 Tue Nov 17 19:53:54 1992  david d `zoo' zuhn  (zoo at cirdan.cygnus.com)
5270
5271         * Makefile.in: also use -I$(srcdir)/../bfd, since some sysdep
5272         files include other sysdep files
5273
5274 Thu Nov 12 16:10:37 1992  Steve Chamberlain  (sac@thepub.cygnus.com)
5275
5276         * z8k-dis.c z8k-opc.h z8kgen.c: checkpoint
5277
5278 Fri Oct  9 04:56:05 1992  John Gilmore  (gnu@cygnus.com)
5279
5280         * configure.in:  For host support, use ../bfd/configure.host
5281         so it stays in sync with the ../bfd/hosts database.
5282
5283 Thu Oct  1 23:38:54 1992  david d `zoo' zuhn  (zoo at cirdan.cygnus.com)
5284
5285         * configure.in: use cpu-vendor-os triple instead of nested cases
5286
5287 Wed Sep 30 16:09:20 1992  Michael Werner  (mtw@cygnus.com)
5288
5289         * z8k-dis.c (unparse_instr): fix bug where opcode returned was
5290         *always* the wrong one.
5291
5292 Wed Sep 30 07:42:17 1992  Steve Chamberlain  (sac@thepub.cygnus.com)
5293
5294         * z8kgen.c: added copyright info
5295
5296 Tue Sep 29 12:20:21 1992  Steve Chamberlain  (sac@thepub.cygnus.com)
5297
5298         * z8k-dis.c (unparse_instr): prettier tabs
5299         * z8kgen.c -> z8k-opc.h: bug fixes in tables
5300
5301 Fri Sep 25 12:50:32 1992  Stu Grossman  (grossman at cygnus.com)
5302
5303         * configure.in:  Add ncr* configuration.
5304         * z8k-dis.c (struct instr_data_s):  Make instr_asmsrc char to make
5305         picayune ANSI compilers happy.
5306
5307 Sep 20 08:50:55 1992  Fred Fish  (fnf@cygnus.com)
5308
5309         * configure.in (i386):  Make i386 and i486 synonymous for now.
5310         * configure.in (i[34]86-*-sysv4):  Add my_host definition.
5311
5312 Fri Sep 18 17:01:23 1992  Ken Raeburn  (raeburn@cambridge.cygnus.com)
5313
5314         * Makefile.in (install): Fix typo.
5315
5316 Fri Sep 18 02:04:24 1992  John Gilmore  (gnu@cygnus.com)
5317
5318         * Makefile.in (make):  Remove obsolete crud.
5319         (sparc-opc.o):  Avoid Sun Make VPATH bug.
5320
5321 Tue Sep  8 17:29:27 1992  K. Richard Pixley  (rich@sendai.cygnus.com)
5322
5323         * Makefile.in: since there are no SUBDIRS, remove rule and
5324         references of subdir_do.
5325
5326 Tue Sep  8 17:02:58 1992  Ken Raeburn  (raeburn@cambridge.cygnus.com)
5327
5328         * Makefile.in (install): Get the library name right here too.
5329         Don't install bfd.h, since it's unrelated to this library.  No
5330         subdirs to recurse into, either.
5331         (CFILES): The source file has a .c suffix, not .o.
5332
5333         * sparc-opc.c: New file, moved from BFD.
5334         * Makefile.in (OFILES): Build it.
5335
5336 Thu Sep  3 16:59:20 1992  Michael Werner  (mtw@cygnus.com)
5337
5338         * z8k-dis.c: fixed forward refferences of some declarations.
5339
5340 Mon Aug 31 16:09:45 1992  Michael Werner  (mtw@cygnus.com)
5341
5342         * Makefile.in: get the name of the library right
5343
5344 Mon Aug 31 13:47:35 1992  Steve Chamberlain  (sac@thepub.cygnus.com)
5345
5346         * z8k-dis.c: knows how to disassemble z8k stuff
5347         * z8k-opc.h: new file full of z8000 opcodes
5348
5349 \f
5350 Local Variables:
5351 version-control: never
5352 End: