1 Tue Sep 2 18:39:08 1997 Jeffrey A Law (law@cygnus.com)
3 * mn10200-dis.c (disassemble): PC relative instructions are
4 relative to the next instruction, not the current instruction.
7 Tue Sep 2 15:41:55 1997 Nick Clifton <nickc@cygnus.com>
9 * v850-dis.c (disassemble): Only signed extend values that are not
10 returned by extract functions.
11 Remove use of V850_OPERAND_ADJUST_SHORT_MEMORY flag.
13 Tue Sep 2 15:39:40 1997 Nick Clifton <nickc@cygnus.com>
15 * v850-opc.c: Update comments. Remove use of
16 V850_OPERAND_ADJUST_SHORT_MEMORY. Fix several operand patterns.
18 Tue Aug 26 09:42:28 1997 Nick Clifton <nickc@cygnus.com>
20 * v850-opc.c (MOVHI): Immediate parameter is unsigned.
23 Mon Aug 25 15:58:07 1997 Christopher Provenzano <proven@cygnus.com>
25 * configure: Rebuilt with latest devo autoconf for NT support.
27 Fri Aug 22 10:35:15 1997 Nick Clifton <nickc@cygnus.com>
29 * v850-dis.c (disassemble): Use curly brace syntax for register
32 * v850-opc.c (v850_opcodes[]): Add NOT_R0 flag to decect cases
33 where r0 is being used as a destination register.
36 Thu Aug 21 11:09:09 1997 Nick Clifton <nickc@cygnus.com>
38 * v850-opc.c (v850_opcodes[]): Move divh opcodes next to each other.
42 Wed Aug 20 00:43:11 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
44 * sh-opc.h (sh_arg_type): Add A_SGR and A_DBR.
45 (sh_nibble_type, sh_arg_type): Add SH4 floating point extensions.
46 (sh_table): Likewise. Add movca.l, ocbi, ocbp, ocbwb.
47 Add insns to access SGR and DBR.
48 * sh-dis.c (print_insn_shx): Add SH4 floating point extensions.
51 Tue Aug 19 10:59:59 1997 Richard Henderson <rth@cygnus.com>
53 * alpha-opc.c (alpha_opcodes): Fix hw_rei_stall mungage.
55 Mon Aug 18 11:10:03 1997 Nick Clifton <nickc@cygnus.com>
57 * v850-opc.c (v850_opcodes[]): Remove use of flag field.
59 * v850-opc.c (v850_opcodes[]): Add support for reversed short load
64 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
66 * configure (cgen_files): Add support for v850e target.
67 * configure.in (cgen_files): Add support for v850e target.
71 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
73 * configure (cgen_files): Add support for v850eq target.
74 * configure.in (cgen_files): Add support for v850eq target.
77 Fri Aug 15 05:17:48 1997 Doug Evans <dje@canuck.cygnus.com>
79 * configure.in (bfd_arc_arch): Add.
81 * Makefile.am (ALL_MACHINES): Add arc-dis.lo, arc-opc.lo.
82 * Makefile.in: Rebuild.
83 * arc-dis.c, arc-opc.c: New files.
84 * disassemble.c (ARCH_all): Define ARCH_arc.
85 (disassembler): Add ARC support.
88 Wed Aug 13 18:52:11 1997 Nick Clifton <nickc@cygnus.com>
91 * .Sanitize (Do-first): Add support for keep-v850eq command line
94 * v850-dis.c (disassemble): Add support for v850EQ instructions.
96 * v850-opc.c (insert_i5div, extract_i5div): New Functions.
97 (v850_opcodes): Add v850EQ instructions.
100 * .Sanitize (Do-first): Add support for keep-v850e command line
103 * v850-dis.c (disassemble): Add support for v850E instructions.
105 * v850-opc.c (insert_d5_4, extract_d5_4, insert_d16_16,
106 extract_d16_16, insert_i9, extract_i9, insert_u9, extract_u9,
107 insert_spe, extract_spe): New Functions.
108 (v850_opcodes): Add v850E instructions.
111 * v850-opc.c: Reorganised and re-layed out to improve readability
116 Tue Aug 5 23:09:31 1997 Ian Lance Taylor <ian@cygnus.com>
118 * configure: Rebuild with autoconf 2.12.1.
120 Mon Aug 4 12:02:16 1997 Ian Lance Taylor <ian@cygnus.com>
122 * aclocal.m4, configure: Rebuild with new automake patches.
124 Fri Aug 1 13:02:04 1997 Ian Lance Taylor <ian@cygnus.com>
126 * configure.in: Set enable_shared before AM_PROG_LIBTOOL.
127 * acinclude.m4: Just include acinclude.m4 from BFD.
128 * aclocal.m4, configure: Rebuild.
130 Thu Jul 31 21:44:42 1997 Ian Lance Taylor <ian@cygnus.com>
132 * Makefile.am: New file, based on old Makefile.in.
133 * acconfig.h: New file.
134 * acinclude.m4: New file.
135 * stamp-h.in: New file.
136 * configure.in: Call AM_INIT_AUTOMAKE and AM_PROG_LIBTOOL.
137 Removed shared library handling; now handled by libtool. Replace
138 AC_CONFIG_HEADER with AM_CONFIG_HEADER. Call AM_MAINTAINER_MODE,
139 AM_CYGWIN32, and AM_EXEEXT. Replace AC_PROG_INSTALL with
140 AM_PROG_INSTALL. Change all .o files to .lo. Remove stamp-h
141 handling in AC_OUTPUT.
142 * dep-in.sed: Change .o to .lo.
143 * Makefile.in: Now built with automake.
144 * aclocal.m4: Now built with aclocal.
145 * config.in, configure: Rebuild.
147 Mon Jul 28 21:52:24 1997 Jeffrey A Law (law@cygnus.com)
149 * mips-opc.c: Fix typo/thinko in "eret" instruction.
152 Mon Jul 28 22:07:14 1997 Andrew Cagney <cagney@b1.cygnus.com>
154 * mips-opc.c: Fix coding of mtsa.
157 Thu Jul 24 13:03:26 1997 Doug Evans <dje@canuck.cygnus.com>
159 * sparc-opc.c (sparc_opcodes): Fix spelling on fpaddX, fpsubX insns.
161 * sparc-dis.c (sorted_opcodes): New static local.
162 (struct opcode_hash): `opcode' is pointer to const element.
163 (build_hash): First arg is now table of sorted pointers.
164 (print_insn_sparc): Sort opcodes by sorting table of pointers.
165 (compare_opcodes): Update.
167 Tue Jul 15 12:05:23 1997 Doug Evans <dje@canuck.cygnus.com>
169 * cgen-opc.c: #include <ctype.h>.
170 (hash_keyword_name): New arg `case_sensitive_p'. Callers updated.
171 Handle case insensitive hashing.
172 (hash_keyword_value): Change type of `value' to unsigned int.
174 Thu Jul 10 12:56:10 1997 Jeffrey A Law (law@cygnus.com)
176 * mips-opc.c (mips_builtin_opcodes): If an insn uses single
177 precision FP, mark it as such. Likewise for double precision
178 FP. Mark ISA1 insns. Consolidate duplicate opcodes where
181 (mips_builtin_opcodes): Remove non-existant r5900 instructions
185 Thu Jun 26 16:20:27 1997 Jeffrey A Law (law@cygnus.com)
187 * mips-opc.c (mips_builtin_opcodes): Add "pinteh", "pexeh" and
188 "pexew" as synonyms for "pintoh", "pexoh", "pexow".
191 Wed Jun 25 15:25:57 1997 Felix Lee <flee@cirdan.cygnus.com>
193 * ppc-opc.c (extract_nsi): make unsigned expression signed before
195 (UNUSED): remove one level of parens, so MSVC doesn't choke on
196 nesting depth when all the macros are expanded.
198 Tue Jun 17 17:02:17 1997 Ian Lance Taylor <ian@cygnus.com>
200 * sparc-opc.c: The fcmp v9a instructions take an integer register
201 as a destination, not a floating point register. From Christian
202 Kuehnke <Christian.Kuehnke@arbi.Informatik.Uni-Oldenburg.DE>.
204 Mon Jun 16 14:13:18 1997 Ian Lance Taylor <ian@cygnus.com>
206 * m68k-dis.c (print_insn_arg): Print case 7.2 using %pc@()
207 syntax. From Roman Hodek
208 <rnhodek@faui22c.informatik.uni-erlangen.de>.
210 * i386-dis.c (twobyte_has_modrm): Fix pand.
212 Mon Jun 16 14:08:38 1997 Michael Taylor <mbt@mit.edu>
214 * i386-dis.c (dis386_twobyte): Fix pand and pandn.
216 Tue Jun 10 11:26:47 1997 H.J. Lu <hjl@gnu.ai.mit.edu>
218 * arm-dis.c: Add prototypes for arm_decode_shift and
221 Mon Jun 2 11:39:04 1997 Gavin Koch <gavin@cygnus.com>
223 * mips-opc.c: Add r3900 insns.
225 Tue May 27 15:55:44 1997 Ian Lance Taylor <ian@cygnus.com>
227 * sh-dis.c (print_insn_shx): Change relmask to bfd_vma. Don't
228 print delay slot instructions on the same line. When using a PC
229 relative load, add a comment with the value being loaded if it can
232 Tue May 27 11:02:08 1997 Alan Modra <alan@spri.levels.unisa.edu.au>
234 * i386-dis.c (dis386[], dis386_twobyte[]): change pushl/popl
235 to pushS/popS for segment regs and byte constant so that
236 pushw/popw printed when in 16 bit data mode.
238 * i386-dis.c (dis386[]): change cwtl, cltd to cWtS, cStd to
239 print cbtw, cwtd in 16 bit data mode.
240 * i386-dis.c (putop): extra case W to support above.
242 * i386-dis.c (print_insn_x86): print addr32 prefix when given
243 address size prefix in 16 bit address mode.
245 Fri May 23 16:47:23 1997 Ian Lance Taylor <ian@cygnus.com>
247 * sh-dis.c: Reindent. Rename local variable fprintf to
250 Thu May 22 14:06:02 1997 Doug Evans <dje@canuck.cygnus.com>
252 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Undo patch of May 2.
254 Tue May 20 11:26:27 1997 Gavin Koch <gavin@cygnus.com>
256 * mips-opc.c (mips_builtin_opcodes): Moved INSN_ISA field into new
258 * mips16-opc.c (mip16_opcodes): same.
260 Mon May 12 15:10:53 1997 Jim Wilson <wilson@cygnus.com>
262 * m68k-opc.c (moveb): Change $d to %d.
264 Mon May 5 14:28:41 1997 Ian Lance Taylor <ian@cygnus.com>
266 * i386-dis.c: (dis386_twobyte): Add MMX instructions.
267 (twobyte_has_modrm): Likewise.
269 (OP_MMX, OP_EM, OP_MS): New static functions.
271 * i386-dis.c: Revert patch of April 4. The output now matches
274 Fri May 2 12:48:37 1997 Doug Evans <dje@canuck.cygnus.com>
276 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Use $uimm16 instead
279 Thu May 1 15:34:15 1997 Doug Evans <dje@canuck.cygnus.com>
281 * m32r-opc.h (CGEN_ARCH): Renamed from CGEN_CPU.
283 Tue Apr 15 12:40:08 1997 Ian Lance Taylor <ian@cygnus.com>
285 * Makefile.in (install): Depend upon installdirs.
286 (installdirs): New target.
288 Mon Apr 14 12:13:51 1997 Ian Lance Taylor <ian@cygnus.com>
290 From Thomas Graichen <graichen@rzpd.de>:
291 * configure.in: Use ${CONFIG_SHELL} when running $ac_config_sub.
292 * configure: Rebuild.
294 Sun Apr 13 17:50:41 1997 Doug Evans <dje@canuck.cygnus.com>
296 * cgen-*.c, m32r-*.c: #include sysdep.h instead of config.h.
297 Delete string{,s}.h support.
299 Thu Apr 10 14:44:56 1997 Doug Evans <dje@canuck.cygnus.com>
301 * cgen-asm.c (cgen_parse_operand_fn): New global.
302 (cgen_parse_{{,un}signed_integer,address}): Update call to
303 cgen_parse_operand_fn.
304 (cgen_init_parse_operand): New function.
305 * m32r-asm.c (parse_insn_normal): cgen_init_parse_operand renamed
306 from cgen_asm_init_parse.
307 (m32r_cgen_assemble_insn): New operand `errmsg'.
308 Delete call to as_bad, return error message to caller.
309 (m32r_cgen_asm_hash_keywords): #if 0 out.
311 Wed Apr 9 12:05:25 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
313 * m68k-dis.c (print_insn_arg) [case 'd']: Print as address register,
315 [case 'J']: Fix typo in register name.
317 Mon Apr 7 16:48:22 1997 Ian Lance Taylor <ian@cygnus.com>
319 * configure.in: Substitute SHLIB_LIBS.
320 * configure: Rebuild.
321 * Makefile.in (SHLIB_LIBS): New variable.
322 ($(SHLIB)): Use $(SHLIB_LIBS).
324 Mon Apr 7 11:45:44 1997 Doug Evans <dje@canuck.cygnus.com>
326 * cgen-dis.c (build_dis_hash_table): Fix xmalloc size computation.
328 * cgen-opc.c (hash_keyword_name): Improve algorithm.
330 * disassemble.c (disassembler): Handle m32r.
332 Fri Apr 4 12:29:38 1997 Doug Evans <dje@canuck.cygnus.com>
334 * m32r-asm.c, m32r-dis.c, m32r-opc.c, m32r-opc.h: New files.
335 * cgen-asm.c, cgen-dis.c, cgen-opc.c: New files.
336 * Makefile.in (CFILES): Add them.
337 (ALL_MACHINES): Add them.
338 (dependencies): Regenerate.
339 * configure.in (cgen_files): New variable.
340 (bfd_m32r_arch): Add entry.
341 * configure: Regenerate.
343 Fri Apr 4 14:04:16 1997 Ian Lance Taylor <ian@cygnus.com>
345 * configure.in: Correct file names for bfd_mn10[23]00_arch.
346 * configure: Rebuild.
348 * Makefile.in: Rebuild dependencies.
350 * d10v-dis.c: Include "ansidecl.h" before "opcode/d10v.h".
352 * i386-dis.c (float_reg): Swap fsubrp and fsubp. Swap fdivrp and
355 Thu Apr 3 13:22:45 1997 Ian Lance Taylor <ian@cygnus.com>
357 * Branched binutils 2.8.
359 Wed Apr 2 12:23:53 1997 Ian Lance Taylor <ian@cygnus.com>
361 * m10200-dis.c: Rename from mn10200-dis.c.
362 * m10200-opc.c: Rename from mn10200-opc.c.
363 * m10300-dis.c: Rename from mn10300-dis.c
364 * m10300-opc.c: Rename from mn10300-opc.c.
365 * Makefile.in: Update accordingly.
367 * mips16-opc.c: Add mul and dmul macros.
369 Tue Apr 1 16:27:45 1997 Klaus Kaempf <kkaempf@progis.de>
371 * makefile.vms: Update CFLAGS, add clean target.
373 Fri Mar 28 12:10:09 1997 Ian Lance Taylor <ian@cygnus.com>
375 * mips-opc.c: Add "wait". From Ralf Baechle
376 <ralf@gnu.ai.mit.edu>.
378 * configure.in: Add stdlib.h to AC_CHECK_HEADERS list.
379 * configure, config.in: Rebuild.
380 * sysdep.h: Include <stdlib.h> if it exists.
381 * sparc-dis.c: Include <stdio.h> and "sysdep.h". Don't include
383 * Makefile.in: Rebuild dependencies.
385 Thu Mar 27 14:24:43 1997 Ian Lance Taylor <ian@cygnus.com>
387 * ppc-opc.c: Add PPC 403 instructions and extended opcodes. From
388 Andrew Bray <andy@madhouse.demon.co.uk>.
390 * mips-opc.c: Add cast when setting mips_opcodes.
393 Tue Mar 25 23:04:00 1997 Stu Grossman (grossman@critters.cygnus.com)
395 * v850-dis.c (disassemble): Fix sign extension problem.
396 * v850-opc.c (extract_d*): Fix sign extension problems to make
397 disassembly calculate branch offsets correctly.
400 Mon Mar 24 13:22:13 1997 Ian Lance Taylor <ian@cygnus.com>
402 * sh-opc.h: Add bf/s and bt/s as synonyms for bf.s and bt.s.
404 * mips-opc.c: Add dctr and dctw.
407 Sun Mar 23 18:08:10 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
409 * d30v-dis.c (print_insn): Change the way signed constants
412 Fri Mar 21 14:37:52 1997 Ian Lance Taylor <ian@cygnus.com>
414 * Makefile.in (BFD_H): New variable.
415 (HFILES): New variable.
416 (CFILES): Add all C files.
417 (.dep, .dep1, dep.sed, dep, dep-in): New targets.
418 Delete old dependencies, and build new ones.
419 * dep-in.sed: New file.
421 Thu Mar 20 19:03:30 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
423 * m68k-opc.c (m68k_opcode_aliases): Added blo and blo{s,b,w,l}.
425 start-sanitize-coldfire
426 Wed Mar 19 06:53:58 1997 J.T. Conklin <jtc@rtl.cygnus.com>
428 * m68k-opc.c (m68k_opcodes): Provide coldfire division module
431 end-sanitize-coldfire
432 Tue Mar 18 14:17:03 1997 Jeffrey A Law (law@cygnus.com)
434 * mn10200-opc.c: Change "trap" to "syscall".
435 * mn10300-opc.c: Add new "syscall" instruction.
437 Mon Mar 17 08:48:03 1997 J.T. Conklin <jtc@beauty.cygnus.com>
439 * m68k-opc.c (m68k_opcodes): Provide correct entries for mulsl and
440 mulul insns on the coldfire.
442 Sat Mar 15 17:13:05 1997 Ian Lance Taylor <ian@cygnus.com>
444 * arm-dis.c (print_insn_arm): Don't print instruction bytes.
445 (print_insn_big_arm): Set bytes_per_chunk and display_endian.
446 (print_insn_little_arm): Likewise.
448 Fri Mar 14 15:08:59 1997 Ian Lance Taylor <ian@cygnus.com>
450 Based on patches from H.J. Lu <hjl@lucon.org>:
451 * i386-dis.c (fetch_data): Add prototype.
452 * m68k-dis.c (fetch_data): Add prototype.
453 (dummy_print_address): Add prototype. Make static.
454 * ppc-opc.c (valid_bo): Add prototype.
455 * sparc-dis.c (build_hash_table): Add prototype.
456 (is_delayed_branch, compute_arch_mask): Add prototypes.
457 (print_insn_sparc): Make several local variables const.
458 (compare_opcodes): Change arguments to const PTR. Add prototype.
459 * sparc-opc.c (arg): Change name field to be const.
460 (lookup_name, lookup_value): Add prototypes. Change table and
461 name parameters to be const.
462 (sparc_encode_asi): Change name parameter to be const.
463 (sparc_encode_membar, sparc_encode_prefetch): Likewise.
464 (sparc_encode_sparclet_cpreg): Likewise.
465 (sparc_decode_asi): Change return type to be const.
466 (sparc_decode_membar, sparc_decode_prefetch): Likewise.
467 (sparc_decode_sparclet_cpreg): Likewise.
469 Fri Mar 7 10:51:49 1997 Ian Lance Taylor <ian@cygnus.com>
471 * Makefile.in ($(SHLINK)): Just use ln -s, not ln -sf, since
472 Solaris doesn't like the combined options, and the -f is
474 (stamp-tshlink, install): Likewise.
476 Thu Mar 6 16:51:11 1997 Jeffrey A Law (law@cygnus.com)
478 * mn10300-opc.c (IMM16_PCREL, SD8N_PCREL, D16_SHIFT): Mark these
481 Tue Mar 4 06:10:36 1997 J.T. Conklin <jtc@cygnus.com>
483 * m68k-opc.c (m68k_opcodes): Fix last change for the mc68010.
485 Mon Mar 3 07:45:20 1997 J.T. Conklin <jtc@cygnus.com>
487 * m68k-opc.c (m68k_opcodes): Added entries for the tst insns on
490 Thu Feb 27 14:04:32 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
492 * m68k-opc.c (m68k_opcodes): Added swbegl pseudo-instruction.
495 Thu Feb 27 11:36:41 1997 Michael Meissner <meissner@cygnus.com>
497 * tic80-dis.c (print_insn_tic80): Set info->bytes_per_line to 8.
499 Wed Feb 26 15:34:48 1997 Michael Meissner <meissner@cygnus.com>
501 * tic80-opc.c (tic80_predefined_symbols): Define r25 properly.
504 Wed Feb 26 13:38:30 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
506 * m68k-dis.c (NEXTSINGLE, NEXTDOUBLE, NEXTEXTEND): Use
507 floatformat_to_double to make portable.
508 (print_insn_arg): Use NEXTEXTEND macro when extracting extended
511 Mon Feb 24 19:26:12 1997 Dawn Perchik <dawn@cygnus.com>
513 * mips-opc.c: Initialize mips_opcodes to mips_builtin_opcodes,
514 and bfd_mips_num_opcodes to bfd_mips_num_builtin_opcodes.
516 Mon Feb 24 15:19:01 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
518 * d10v-dis.c, d10v-opc.c: Change pre_defined_registers to
519 d10v_predefined_registers and reg_name_cnt to d10v_reg_name_cnt.
522 Mon Feb 24 14:33:26 1997 Fred Fish <fnf@cygnus.com>
524 * tic80-opc.c (LSI_SCALED): Renamed from this ...
525 (OFF_SL_BR_SCALED): ... to this, and added the flag
526 TIC80_OPERAND_BASEREL to the flags word.
527 (tic80_opcodes): Replace all occurances of LSI_SCALED with
531 Sat Feb 22 21:25:00 1997 Dawn Perchik <dawn@cygnus.com>
533 * mips-opc.c: Add macros for cop0, cop1 cop2 and cop3.
534 Change mips_opcodes from const array to a pointer,
535 and change bfd_mips_num_opcodes from const int to int,
536 so that we can increase the size of the mips opcodes table
540 Sat Feb 22 21:03:47 1997 Fred Fish <fnf@cygnus.com>
542 * tic80-opc.c (tic80_predefined_symbols): Revert change to
543 store BITNUM values in the table in one's complement form
544 to match behavior when assembler is given a raw numeric
545 value for a BITNUM operand.
546 * tic80-dis.c (print_operand_bitnum): Ditto.
550 Fri Feb 21 16:31:18 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
552 * d30v-opc.c: Removed references to FLAG_X.
555 Wed Feb 19 14:51:20 1997 Ian Lance Taylor <ian@cygnus.com>
557 * Makefile.in: Add dependencies on ../bfd/bfd.h as required.
560 Tue Feb 18 17:43:43 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
562 * Makefile.in: Added d30v object files.
563 * configure: (bfd_d30v_arch) Rebuilt.
564 * configure.in: (bfd_d30v_arch) Added new case.
565 * d30v-dis.c: New file.
566 * d30v-opc.c: New file.
567 * disassemble.c (disassembler) Add entry for d30v.
571 Tue Feb 18 16:32:08 1997 Fred Fish <fnf@cygnus.com>
573 * tic80-opc.c (tic80_predefined_symbols): Add symbolic
574 representations for the floating point BITNUM values.
576 Fri Feb 14 12:14:05 1997 Fred Fish <fnf@cygnus.com>
578 * tic80-opc.c (tic80_predefined_symbols): Store BITNUM values
579 in the table in one's complement form, as they appear in the
581 (tic80_symbol_to_value): Use macros to access predefined
583 (tic80_value_to_symbol): Ditto.
584 (tic80_next_predefined_symbol): New function.
585 * tic80-dis.c (print_operand_bitnum): Remove code that did
586 one's complement for BITNUM values.
590 Fri Feb 14 13:56:51 1997 Gavin Koch <gavin@cygnus.com>
592 * mips-opc.c: bug fix, can't mark insns INSN_5900 and INSN_ISA4
595 Thu Feb 13 21:56:51 1997 Klaus Kaempf <kkaempf@progis.de>
597 * makefile.vms: Remove 8 bit characters. Update to latest
600 Thu Feb 13 20:41:22 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
602 * m68k-opc.c (m68k_opcodes): Add swbeg pseudo-instruction.
604 Thu Feb 13 16:30:02 1997 Jeffrey A Law (law@cygnus.com)
606 * mn10200-opc.c (IMM16_PCREL): This is a signed operand.
607 (IMM24_PCREL): Likewise.
609 Thu Feb 13 13:28:43 1997 Ian Lance Taylor <ian@cygnus.com>
611 * mips-dis.c (print_mips16_insn_arg): Use memaddr - 2 as the base
612 address for an extended PC relative instruction that is not a
615 Wed Feb 12 12:27:40 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
617 * m68k-dis.c (print_insn_m68k): Set bytes_per_chunk and
621 Tue Feb 11 16:36:31 1997 Fred Fish <fnf@cygnus.com>
623 * tic80-opc.c (tic80_operands): Fix typo '+' -> '|'.
624 (tic80_opcodes): Sort entries so that long immediate forms
625 come after short immediate forms, making it easier for
626 assembler to select the right one for a given operand.
629 Tue Feb 11 15:26:47 1997 Ian Lance Taylor <ian@cygnus.com>
631 * mips-dis.c (_print_insn_mips): Set bytes_per_chunk and
633 (print_insn_mips16): Likewise.
636 Fri Feb 7 11:12:44 1997 Gavin Koch <gavin@cygnus.com>
638 * mips-opc.c: add r5900.
642 Mon Feb 10 10:12:41 1997 Fred Fish <fnf@cygnus.com>
644 * tic80-opc.c (tic80_symbol_to_value): Changed to accept
645 a symbol class that restricts translation to just that
646 class (general register, condition code, etc).
648 Thu Feb 6 17:34:09 1997 Fred Fish <fnf@cygnus.com>
650 * tic80-opc.c (tic80_operands): Add REG_0_E, REG_22_E,
651 and REG_DEST_E for register operands that have to be
652 an even numbered register. Add REG_FPA for operands that
653 are one of the floating point accumulator registers.
654 Add TIC80_OPERAND_MASK to flags for ENDMASK operand.
655 (tic80_opcodes): Change entries that need even numbered
656 register operands to use the new operand table entries.
657 Add "or" entries that are identical to "or.tt" entries.
660 Wed Feb 5 11:12:44 1997 Ian Lance Taylor <ian@cygnus.com>
662 * mips16-opc.c: Add new cases of exit instruction for
664 * mips-dis.c (print_mips16_insn_arg): Display floating point
665 registers in operands of exit instruction. Print `$' before
666 register names in operands of entry and exit instructions.
669 Thu Jan 30 14:09:03 1997 Fred Fish <fnf@cygnus.com>
671 * tic80-opc.c (tic80_predefined_symbols): Table of name/value
672 pairs for all predefined symbols recognized by the assembler.
673 Also used by the disassembling routines.
674 (tic80_symbol_to_value): New function.
675 (tic80_value_to_symbol): New function.
676 * tic80-dis.c (print_operand_control_register,
677 print_operand_condition_code, print_operand_bitnum):
678 Remove private tables and use tic80_value_to_symbol function.
681 Thu Jan 30 11:30:45 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
683 * d10v-dis.c (print_operand): Change address printing
684 to correctly handle PC wrapping. Fixes PR11490.
686 Wed Jan 29 09:39:17 1997 Jeffrey A Law (law@cygnus.com)
688 * mn10200-opc.c (mn10200_operands): Make 8 and 16 bit pc-relative
691 Tue Jan 28 15:57:34 1997 Ian Lance Taylor <ian@cygnus.com>
693 * mips-dis.c (print_insn_mips16): Set insn_info information.
694 (print_mips16_insn_arg): Likewise.
696 * mips-dis.c (print_insn_mips16): Better handling of an extend
697 opcode followed by an instruction which can not be extended.
699 Fri Jan 24 12:08:21 1997 J.T. Conklin <jtc@cygnus.com>
701 * m68k-opc.c (m68k_opcodes): Changed operand specifier for the
702 coldfire moveb instruction to not allow an address register as
703 destination. Although the documentation does not indicate that
704 this is invalid, experiments uncovered unexpected behavior.
705 Added a comment explaining the situation. Thanks to Andreas
706 Schwab for pointing this out to me.
709 Wed Jan 22 20:13:51 1997 Fred Fish <fnf@cygnus.com>
711 * tic80-opc.c (tic80_opcodes): Expand comment to note that the
712 entries are presorted so that entries with the same mnemonic are
713 adjacent to each other in the table. Sort the entries for each
714 instruction so that this is true.
717 Mon Jan 20 12:48:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
719 * m68k-dis.c: Include <libiberty.h>.
720 (print_insn_m68k): Sort the opcode table on the most significant
721 nibble of the opcode.
724 Sat Jan 18 15:15:05 1997 Fred Fish <fnf@cygnus.com>
726 * tic80-dis.c (tic80_opcodes): Add "wrcr", "vmpy", "vrnd",
727 "vsub", "vst", "xnor", and "xor" instructions.
728 (V_a1): Renamed from V_a, msb of accumulator reg number.
729 (V_a0): Add macro, lsb of accumulator reg number.
731 Fri Jan 17 18:24:31 1997 Fred Fish <fnf@cygnus.com>
733 * tic80-dis.c (print_insn_tic80): Broke excessively long
734 function up into several smaller ones and arranged for
735 the instruction printing function to be callable recursively
736 to print vector instructions that have both a load and a
737 math instruction packed into a single opcode.
738 * tic80-opc.c (tic80_opcodes): Expand comment for vld opcode
739 to explain why it comes after the other vector opcodes.
742 Fri Jan 17 16:19:15 1997 J.T. Conklin <jtc@beauty.cygnus.com>
744 * m68k-opc.c (m68k_opcodes): add b, w, or l specifier to coldfire
745 move insns to handle immediate operands.
747 Thu Jan 17 16:19:00 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
749 * m68k-opc.c (m68k_opcodes): Delete duplicate entry for "cmpil".
750 fix operand mask in the "moveml" entries for the coldfire.
753 Thu Jan 16 20:54:40 1997 Fred Fish <fnf@cygnus.com>
755 * tic80-opc.c (V_a, V_m, V_S, V_Z, V_p, OP_V, MASK_V):
756 New macros for building vector instruction opcodes.
757 (tic80_opcodes): Remove all uses of FMT_SI, FMT_REG, and
758 FMT_LI, which were unused. The field is now a flags field.
759 Remove some opcodes that are possible, but illegal, such
760 as long immediate instructions with doubles for immediate
761 values. Add "vadd" and "vld" instructions.
763 Wed Jan 15 18:59:51 1997 Fred Fish <fnf@cygnus.com>
765 * tic80-opc.c (tic80_operands): Reorder some table entries to make
766 the order more logical. Move the shift alias instructions ("rotl",
767 "shl", "ins", "rotr", "extu", "exts", "srl", and "sra" to be
768 interspersed with the regular sr.x and sl.x instructions. Add
769 and test new instruction opcodes for "sl", "sli", "sr", "sri", "st",
770 "sub", "subu", "swcr", and "trap".
772 Tue Jan 14 19:42:50 1997 Fred Fish <fnf@cygnus.com>
774 * tic80-opc.c (OFF_SS_PC): Renamed from OFF_SS.
775 (OFF_SL_PC): Renamed from OFF_SL.
776 (OFF_SS_BR): New operand type for base relative operand.
777 (OFF_SL_BR): New operand type for base relative operand.
778 (REG_BASE): New operand type for base register operand.
779 (tic80_opcodes): Add and test "fmpy", "frndm", "frndn", "frndp",
780 "frndz", "fsqrt", "fsub", "illop0", "illopF", "ins", "jsr",
781 "ld", "ld.u", "lmo", "or", "rdcr", "rmo", "rotl", and "rotr"
783 * tic80-dis.c (print_insn_tic80): Print opcode name with fixed width
784 10 char field, padded with spaces on rhs, rather than a string
785 followed by a tab. Use renamed TIC80_OPERAND_PCREL flag bit rather
786 than old TIC80_OPERAND_RELATIVE. Add support for new
787 TIC80_OPERAND_BASEREL flag bit.
789 Mon Jan 13 15:58:56 1997 Fred Fish <fnf@cygnus.com>
791 * tic80-dis.c (print_insn_tic80): Print floating point operands
793 * tic80-opc.c (SPFI): Add single precision floating point
794 immediate operand type.
795 (ROTATE): Add rotate operand type for shifts.
796 (ENDMASK): Add for shifts.
797 (n): Macro for the 'n' bit.
798 (i): Macro for the 'i' bit.
799 (PD): Macro for the 'PD' field.
800 (P2): Macro for the 'P2' field.
801 (P1): Macro for the 'P1' field.
802 (tic80_opcodes): Add entries for "exts", "extu", "fadd",
806 Mon Jan 6 15:06:55 1997 Jeffrey A Law (law@cygnus.com)
808 * mn10200-dis.c (disassemble): Mask off unwanted bits after
809 adding in current address for pc-relative operands.
812 Mon Jan 6 10:56:25 1997 Fred Fish <fnf@cygnus.com>
814 * tic80-dis.c (R_SCALED): Add macro to test for ":s" modifier bit.
815 (print_insn_tic80): If R_SCALED then print ":s" modifier for operand.
816 * tic80-opc.c (REG0, REG22, REG27, SSOFF, LSOFF): Names
817 changed to REG_0, REG_22, REG_DEST, OFF_SS, OFF_SL respectively.
818 (SICR, LICR, REGM_SI, REGM_LI): Names changed to CR_SI, CR_LI,
819 REG_BASE_M_SI, REG_BASE_M_LI respectively.
820 (REG_SCALED, LSI_SCALED): New operand types.
821 (E): New macro for 'E' bit at bit 27.
822 (tic80_opcodes): Add and test dld, dld.u, dst, estop, and etrap
823 opcodes, including the various size flavors (b,h,w,d) for
824 the direct load and store instructions.
826 Sun Jan 5 12:18:14 1997 Fred Fish <fnf@cygnus.com>
828 * tic80-dis.c (M_SI, M_LI): Add macros to test for ":m" modifier bit
830 * tic80-dis.c (print_insn_tic80): Change comma and paren handling.
831 Use M_SI and M_LI macros to check for ":m" modifier for GPR operands.
832 * tic80-opc.c (tic80_operands): Add REGM_SI and REGM_LI operands.
833 (F, M_REG, M_LI, M_SI, SZ_REG, SZ_LI, SZ_SI, D, S): New bit-twiddlers.
834 (MASK_LI_M, MASK_SI_M, MASK_REG_M): Remove and replace in opcode
835 masks with "MASK_* & ~M_*" to get the M bit reset.
836 (tic80_opcodes): Add bsr, bsr.a, cmnd, cmp, dcachec, and dcachef.
838 Sat Jan 4 19:05:05 1997 Fred Fish <fnf@cygnus.com>
840 * tic80-dis.c (print_insn_tic80): Print TIC80_OPERAND_RELATIVE
841 correctly. Add support for printing TIC80_OPERAND_BITNUM and
842 TIC80_OPERAND_CC, and TIC80_OPERAND_CR operands in symbolic
844 * tic80-opc.c (tic80_operands): Add SSOFF, LSOFF, BITNUM,
845 CC, SICR, and LICR table entries.
846 (tic80_opcodes): Add and test "nop", "br", "bbo", "bbz",
847 "bcnd", and "brcr" opcodes.
850 Fri Jan 3 18:32:11 1997 Fred Fish <fnf@cygnus.com>
852 * ppc-opc.c (powerpc_operands): Make comment match the
853 actual fields (no shift field).
854 * sparc-opc.c (sparc_opcodes): Document why this cannot be "const".
856 * tic80-dis.c (print_insn_tic80): Replace abort stub with a
857 partial implementation, work in progress.
858 * tic80-opc.c (tic80_operands): Begin construction operands table.
859 (tic80_opcodes): Continue populating opcodes table and start
860 filling in the operand indices.
861 (tic80_num_opcodes): Add this.
864 Fri Jan 3 12:13:52 1997 Ian Lance Taylor <ian@cygnus.com>
866 * m68k-opc.c: Add #B case for moveq.
868 Thu Jan 2 12:14:29 1997 Jeffrey A Law (law@cygnus.com)
870 * mn10300-dis.c (disassemble): Make sure all variables are initialized
871 before they are used.
874 Tue Dec 31 12:20:38 1996 Jeffrey A Law (law@cygnus.com)
876 * v850-opc.c (v850_opcodes): Put curly-braces around operands
877 for "breakpoint" instruction.
880 Tue Dec 31 15:38:13 1996 Ian Lance Taylor <ian@cygnus.com>
882 * Makefile.in (ALL_CFLAGS): Add -D_GNU_SOURCE.
883 (dep): Use ALL_CFLAGS rather than CFLAGS.
886 Tue Dec 31 15:09:16 1996 Michael Meissner <meissner@tiktok.cygnus.com>
888 * v850-opc.c (D8_{6,7}): Set V850_OPERAND_ADJUST_SHORT_MEMORY
892 Mon Dec 30 17:02:11 1996 Fred Fish <fnf@cygnus.com>
894 * Makefile.in (m68k-opc.o, alpha-opc.o): Remove dis-asm.h dependency.
896 (tic80-dis.o, tic80-opc.o): Add rules per comment in Makefile.in.
899 Mon Dec 30 11:38:01 1996 Ian Lance Taylor <ian@cygnus.com>
901 * mips16-opc.c: Add "abs".
904 Sun Dec 29 10:58:22 1996 Fred Fish <fnf@cygnus.com>
906 * Makefile.in (ALL_MACHINES): Add tic80-dis.o and tic80-opc.o.
907 * disassemble.c (ARCH_tic80): Define if ARCH_all is defined.
908 (disassembler): Add bfd_arch_tic80 support to set disassemble
910 * tic80-dis.c (print_insn_tic80): Add stub.
912 Fri Dec 27 22:30:57 1996 Fred Fish <fnf@cygnus.com>
914 * configure.in (arch in $selarchs): Add bfd_tic80_arch entry.
915 * configure: Regenerate with autoconf.
916 * tic80-dis.c: Add file.
917 * tic80-opc.c: Add file.
920 Fri Dec 20 14:30:19 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
922 * d10v-opc.c (pre_defined_registers): Add cr[0-15], dpc, dpsw, link.
924 Mon Dec 16 13:00:15 1996 Jeffrey A Law (law@cygnus.com)
926 * mn10200-opc.c (mn10200_operands): Add SIMM16N.
927 (mn10200_opcodes): Use it for some logicals and btst insns.
928 Add "break" and "trap" instructions.
930 * mn10300-opc.c (mn10300_opcodes): Add "break" instruction.
932 * mn10200-opc.c: Add pseudo-ops for "mov (an),am" and "mov an,(am)".
934 Sat Dec 14 22:36:20 1996 Ian Lance Taylor <ian@cygnus.com>
936 * mips-dis.c (print_mips16_insn_arg): The base address of a PC
937 relative load or add now depends upon whether the instruction is
940 Wed Dec 11 09:23:46 1996 Jeffrey A Law (law@cygnus.com)
942 * mn10200-dis.c: Finish writing disassembler.
943 * mn10200-opc.c (mn10200_opcodes): Fix mask for "mov imm8,dn".
944 Fix mask for "jmp (an)".
946 * mn10300-dis.c (disassemble, print_insn_mn10300): Corrently
947 handle endianness issues for mn10300.
949 * mn10200-opc.c (mn10200_opcodes): Fix operands for "movb dm,(an)".
951 Tue Dec 10 12:08:05 1996 Jeffrey A Law (law@cygnus.com)
953 * mn10200-opc.c (mn10200_opcodes): "mov imm8,d0" is a format 2
954 instruction. Fix opcode field for "movb (imm24),dn".
956 * mn10200-opc.c (mn10200_operands): Fix insertion position
959 Mon Dec 9 16:42:43 1996 Jeffrey A Law (law@cygnus.com)
961 * mn10200-opc.c: Create mn10200 opcode table.
962 * mn10200-dis.c: Flesh out mn10200 disassembler. Not ready,
963 but moving along nicely.
965 Sun Dec 8 04:28:31 1996 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
967 * Makefile.in (ALL_MACHINES): Add mips16-opc.o.
969 Fri Dec 6 16:47:40 1996 J.T. Conklin <jtc@rhino.cygnus.com>
971 * m68k-opc.c (m68k_opcodes): Revert change to use < and >
972 specifiers for fmovem* instructions.
974 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
976 * mn10300-dis.c (disassemble): Remove '$' register prefixing.
978 Fri Dec 6 17:34:39 1996 Ian Lance Taylor <ian@cygnus.com>
980 * mips16-opc.c: Change opcode for entry/exit to avoid conflicting
983 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
985 * mn10300-opc.c: Add some comments explaining the various
988 * mn10300-dis.c (disassemble): Fix minor gcc -Wall warnings.
990 Thu Dec 5 12:09:48 1996 J.T. Conklin <jtc@rtl.cygnus.com>
992 * m68k-dis.c (print_insn_arg): Handle new < and > operand
995 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
996 operand specifiers in fmovm* instructions.
998 Wed Dec 4 14:52:18 1996 Ian Lance Taylor <ian@cygnus.com>
1000 * ppc-opc.c (insert_li): Give an error if the offset has the two
1001 least significant bits set.
1003 Wed Nov 27 13:09:01 1996 Ian Lance Taylor <ian@cygnus.com>
1005 * mips-dis.c (print_insn_mips16): Separate the instruction from
1006 the arguments with a tab, not a space.
1008 Tue Nov 26 13:24:17 1996 Jeffrey A Law (law@cygnus.com)
1010 * mn10300-dis.c (disasemble): Finish conversion to '$' as
1013 * mn10300-opc.c (mn10300_opcodes): Fix mask field for
1016 Tue Nov 26 10:53:21 1996 Ian Lance Taylor <ian@cygnus.com>
1018 * configure: Rebuild with autoconf 2.12.
1020 Add support for mips16 (16 bit MIPS implementation):
1021 * mips16-opc.c: New file.
1022 * mips-dis.c: Include "elf-bfd.h" and "elf/mips.h".
1023 (mips16_reg_names): New static array.
1024 (print_insn_big_mips): Use print_insn_mips16 in 16 bit mode or
1025 after seeing a 16 bit symbol.
1026 (print_insn_little_mips): Likewise.
1027 (print_insn_mips16): New static function.
1028 (print_mips16_insn_arg): New static function.
1029 * mips-opc.c: Add jalx instruction.
1030 * Makefile.in (mips16-opc.o): New target.
1031 * configure.in: Use mips16-opc.o for bfd_mips_arch.
1032 * configure: Rebuild.
1034 Mon Nov 25 16:15:17 1996 J.T. Conklin <jtc@cygnus.com>
1036 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
1037 operand specifiers in *save, *restore and movem* instructions.
1039 * m68k-opc.c (m68k_opcodes): Fix move and movem instructions for
1042 * m68k-opc.c (m68k_opcodes): The coldfire (mcf5200) can only use
1043 register operands for immediate arithmetic, not, neg, negx, and
1044 set according to condition instructions.
1046 * m68k-opc.c (m68k_opcodes): Consistantly Use "s" as the storage
1047 specifier of the effective-address operand in immediate forms of
1048 arithmetic instructions. The specifier for the immediate operand
1049 notes how and where the constant will be stored.
1051 Mon Nov 25 11:17:01 1996 Jeffrey A Law (law@cygnus.com)
1053 * mn10300-opc.c (mn10300_opcodes): Remove redundant "lcc"
1056 * mn10300-dis.c (disassemble): Use '$' instead of '%' for
1059 * mn10300-dis.c (disassemble): Prefix registers with '%'.
1061 Wed Nov 20 10:37:13 1996 Jeffrey A Law (law@cygnus.com)
1063 * mn10300-dis.c (disassemble): Handle register lists.
1065 * mn10300-opc.c: Fix handling of register list operand for
1066 "call", "ret", and "rets" instructions.
1068 * mn10300-dis.c (disassemble): Print PC-relative and memory
1069 addresses symbolically if possible.
1070 * mn10300-opc.c: Distinguish between absolute memory addresses,
1071 pc-relative offsets & random immediates.
1073 * mn10300-dis.c (print_insn_mn10300): Fix fetch of last byte
1075 (disassemble): Handle SPLIT and EXTENDED operands.
1077 Tue Nov 19 13:33:01 1996 Jeffrey A Law (law@cygnus.com)
1079 * mn10300-dis.c: Rough cut at printing some operands.
1081 * mn10300-dis.c: Start working on disassembler support.
1082 * mn10300-opc.c (mn10300_opcodes): Fix masks on several insns.
1084 * mn10300-opc.c (mn10300_operands): Add "REGS" for a register
1086 (mn10300_opcodes): Use REGS for register list in "movm" instructions.
1088 Mon Nov 18 15:20:35 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1090 * d10v-opc.c (d10v_opcodes): Add3 sets the carry.
1092 Fri Nov 15 13:43:19 1996 Jeffrey A Law (law@cygnus.com)
1094 * mn10300-opc.c (mn10300_opcodes): Demand parens around
1095 register argument is calls and jmp instructions.
1097 Thu Nov 7 00:26:05 1996 Jeffrey A Law (law@cygnus.com)
1099 * mn10300-opc.c (mn10300_opcodes): Use DN01 for putx and
1100 getx operand. Fix opcode for mulqu imm,dn.
1102 Wed Nov 6 13:42:32 1996 Jeffrey A Law (law@cygnus.com)
1104 * mn10300-opc.c (mn10300_operands): Hijack "bits" field
1105 in MN10300_OPERAND_SPLIT operands for how many bits
1106 appear in the basic insn word. Add IMM32_HIGH24,
1107 IMM32_HIGH24_LOWSHIFT8, IMM8E_SHIFT8.
1108 (mn10300_opcodes): Use new operands as needed.
1110 * mn10300-opc.c (mn10300_operands): Add IMM32_LOWSHIFT8
1111 for bset, bclr, btst instructions.
1112 (mn10300_opcodes): Use new IMM32_LOWSHIFT8 as needed.
1114 * mn10300-opc.c (mn10300_operands): Remove many redundant
1115 operands. Update opcode table as appropriate.
1116 (IMM32): Add MN10300_OPERAND_SPLIT flag.
1117 (mn10300_opcodes): Fix single bit error in mov imm32,dn insn.
1119 Tue Nov 5 13:26:58 1996 Jeffrey A Law (law@cygnus.com)
1121 * mn10300-opc.c (mn10300_operands): Add DN2, DM2, AN2, AM2
1122 operands (for indexed load/stores). Fix bitpos for DI
1123 operand. Add SN8N_SHIFT8, IMM8_SHIFT8, and D16_SHIFT for the
1124 few instructions that insert immediates/displacements in the
1125 middle of the instruction. Add IMM8E for 8 bit immediate in
1126 the extended part of an instruction.
1127 (mn10300_operands): Use new opcodes as appropriate.
1129 Tue Nov 5 10:30:51 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1131 * d10v-opc.c (d10v_opcodes): Declare the trap instruction
1132 sequential so the assembler never parallelizes it with
1135 Mon Nov 4 12:50:40 1996 Jeffrey A Law (law@cygnus.com)
1137 * mn10300-opc.c (mn10300_operands): Add DN01 and AN01 for
1138 a data/address register that appears in register field 0
1139 and register field 1.
1140 (mn10300_opcodes): Use DN01 and AN01 for mov/cmp imm8,DN/AN
1142 Fri Nov 1 10:29:11 1996 Richard Henderson <rth@tamu.edu>
1144 * alpha-dis.c (print_insn_alpha): Use new NOPAL mask for
1145 standard disassembly.
1147 * alpha-opc.c (alpha_operands): Rearrange flags slot.
1148 (alpha_opcodes): Add new BWX, CIX, and MAX instructions.
1149 Recategorize PALcode instructions.
1152 Wed Oct 30 16:46:58 1996 Jeffrey A Law (law@cygnus.com)
1154 * v850-opc.c (v850_opcodes): Add relaxing "jbr".
1157 Tue Oct 29 16:30:28 1996 Ian Lance Taylor <ian@cygnus.com>
1159 * mips-dis.c (_print_insn_mips): Don't print a trailing tab if
1160 there are no operand types.
1163 Tue Oct 29 12:22:21 1996 Jeffrey A Law (law@cygnus.com)
1165 * v850-opc.c (D9_RELAX): Renamed from D9, all references
1167 (v850_operands): Make sure D22 immediately follows D9_RELAX.
1170 Fri Oct 25 12:12:53 1996 Ian Lance Taylor <ian@cygnus.com>
1172 * i386-dis.c (print_insn_x86): Set info->bytes_per_line to 5.
1175 Thu Oct 24 17:53:52 1996 Jeffrey A Law (law@cygnus.com)
1177 * v850-opc.c (insert_d8_6): Fix operand insertion for sld.w
1178 and sst.w instructions.
1180 * v850-opc.c (v850_opcodes): Add "jCC" instructions (aliases for
1184 Thu Oct 24 17:21:20 1996 Ian Lance Taylor <ian@cygnus.com>
1186 * mips-dis.c (_print_insn_mips): Use a tab between the instruction
1189 Tue Oct 22 23:32:56 1996 Ian Lance Taylor <ian@cygnus.com>
1191 * ppc-opc.c (PPCPWR2): Define.
1192 (powerpc_opcodes): Use PPCPWR2 for fsqrt, rather than duplicating
1195 Fri Oct 11 16:03:49 1996 Jeffrey A Law (law@cygnus.com)
1197 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode
1198 field for movhu instruction.
1201 * v850-dis.c (disassemble): For V850_OPERAND_SIGNED operands,
1202 cast value to "long" not "signed long" to keep hpux10
1206 Thu Oct 10 10:25:58 1996 Jeffrey A Law (law@cygnus.com)
1208 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode field
1211 * mn10300-opc.c (FMT*): Remove definitions.
1213 * mn10300-opc.c (mn10300_opcodes): Fix destination register
1214 for shift-by-register opcodes.
1216 * mn10300-opc.c (mn10300_operands): Break DN, DM, AN, AM
1217 into [AD][MN][01] for encoding the position of the register
1220 Wed Oct 9 11:19:26 1996 Jeffrey A Law (law@cygnus.com)
1222 * mn10300-opc.c (mn10300_opcodes): Add "extended" instructions,
1223 "putx", "getx", "mulq", "mulqu", "sat16", "sat24", "bsch".
1225 Tue Oct 8 11:55:35 1996 Jeffrey A Law (law@cygnus.com)
1227 * mn10300-opc.c (mn10300_operands): Remove "REGS" operand.
1228 Fix various typos. Add "PAREN" operand.
1229 (MEM, MEM2): Define.
1230 (mn10300_opcodes): Surround all memory addresses with "PAREN"
1231 operands. Fix several typos.
1233 * mn10300-opc.c (mn10300_opcodes): Fix typos in yesterday's
1236 Mon Oct 7 16:48:45 1996 Jeffrey A Law (law@cygnus.com)
1238 * mn10300-opc.c (FMT_XX): Renumber starting at one.
1239 (mn10300_operands): Rough cut. Enough to parse "mov" instructions
1241 (mn10300_opcodes): Break opcode format out into its own field.
1242 Update many operand fields to deal with signed vs unsigned
1243 issues. Fix one or two typos in the "mov" instruction
1244 opcode, mask and/or operand fields.
1246 Mon Oct 7 11:39:49 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1248 * m68k-opc.c (plusha): Prefer encoding for m68040up, in case
1249 m68851 wasn't reset.
1251 Thu Oct 3 17:17:02 1996 Ian Lance Taylor <ian@cygnus.com>
1253 * mn10300-opc.c (mn10300_opcodes): Add opcode & masks for
1254 all opcodes. Very rough cut at operands for all opcodes.
1256 * mn10300-opc.c (mn10300_opcodes): Start fleshing out the
1259 Thu Oct 3 10:06:07 1996 Jeffrey A Law (law@cygnus.com)
1261 * mn10200-opc.c, mn10300-opc.c: New files.
1262 * mn10200-dis.c, mn10300-dis.c: New files.
1263 * mn10x00-opc.c, mn10x00-dis.c: Deleted.
1264 * disassemble.c: Break mn10x00 support into 10200 and 10300
1266 * configure.in: Likewise.
1267 * configure: Rebuilt.
1269 Thu Oct 3 15:59:12 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
1271 * Makefile.in (MOSTLYCLEAN): Move config.log to distclean.
1273 Wed Oct 2 23:28:42 1996 Jeffrey A Law (law@cygnus.com)
1275 * mn10x00-opc.c, mn10x00-dis.c: New files for Matsushita
1277 * disassemble (ARCH_mn10x00): Define.
1278 (disassembler): Handle bfd_arch_mn10x00.
1279 * configure.in: Recognize bfd_mn10x00_arch.
1280 * configure: Rebuilt.
1282 Tue Oct 1 10:49:11 1996 Ian Lance Taylor <ian@cygnus.com>
1284 * i386-dis.c (op_rtn): Change to be a pointer. Adjust uses
1285 accordingly. Don't declare functions using op_rtn.
1288 Fri Sep 27 18:28:59 1996 Stu Grossman (grossman@critters.cygnus.com)
1290 * v850-dis.c (disassemble): Add memaddr argument. Re-arrange
1291 params to be more standard.
1292 * (disassemble): Print absolute addresses and symbolic names for
1293 branch and jump targets.
1294 * v850-opc.c (v850_operand): Add displacement flag to 9 and 22
1296 * (v850_opcodes): Add breakpoint insn.
1299 Mon Sep 23 12:32:26 1996 Ian Lance Taylor <ian@cygnus.com>
1301 * m68k-opc.c: Move the fmovemx data register cases before the
1302 other cases, so that they get recognized before the data register
1303 does gets treated as a degenerate register list.
1305 Tue Sep 17 12:06:51 1996 Ian Lance Taylor <ian@cygnus.com>
1307 * mips-opc.c: Add a case for "div" and "divu" with two registers
1308 and a destination of $0.
1310 Tue Sep 10 16:12:39 1996 Fred Fish <fnf@rtl.cygnus.com>
1312 * mips-dis.c (print_insn_arg): Add prototype.
1313 (_print_insn_mips): Ditto.
1315 Mon Sep 9 14:26:26 1996 Ian Lance Taylor <ian@cygnus.com>
1317 * mips-dis.c (print_insn_arg): Print condition code registers as
1320 Tue Sep 3 12:09:46 1996 Doug Evans <dje@canuck.cygnus.com>
1322 * sparc-opc.c (sparc_opcodes): Add setuw, setsw, setx.
1325 Tue Sep 3 12:05:25 1996 Jeffrey A Law (law@cygnus.com)
1327 * v850-dis.c (disassemble): Make static. Provide prototype.
1329 Sun Sep 1 22:30:40 1996 Jeffrey A Law (law@cygnus.com)
1331 * v850-opc.c (insert_d9, insert_d22): Fix boundary case
1334 Sat Aug 31 01:27:26 1996 Jeffrey A Law (law@cygnus.com)
1336 * v850-dis.c (disassemble): Handle insertion of ',', '[' and
1337 ']' characters into the output stream.
1338 * v850-opc.c (v850_opcodes: Remove size field from all opcodes.
1339 Add "memop" field to all opcodes (for the disassembler).
1340 Reorder opcodes so that "nop" comes before "mov" and "jr"
1341 comes before "jarl".
1343 * v850-dis.c (print_insn_v850): Fix typo in last change.
1345 * v850-dis.c (print_insn_v850): Properly handle disassembling
1346 a two byte insn at the end of a memory region when the memory
1347 region's size is only two byte aligned.
1349 * v850-dis.c (v850_cc_names): Fix stupid thinkos.
1351 * v850-dis.c (v850_reg_names): Define.
1352 (v850_sreg_names, v850_cc_names): Likewise.
1353 (disassemble): Very rough cut at printing operands (unformatted).
1355 * v850-opc.c (BOP_MASK): Fix.
1356 (v850_opcodes): Fix mask for jarl and jr.
1358 * v850-dis.c: New file. Skeleton for disassembler support.
1359 * Makefile.in Remove v850 references, they're not needed here
1360 and they weren't being sanitized away.
1361 * configure.in: Add v850-dis.o when building v850 toolchains.
1362 * configure: Rebuilt.
1363 * disassemble.c (disassembler): Call v850 disassembler.
1365 * v850-opc.c (insert_d8_7, extract_d8_7): New functions.
1366 (insert_d8_6, extract_d8_6): New functions.
1367 (v850_operands): Rename D7S to D7; operand for D7 is unsigned.
1368 Rename D8 to D8_7, use {insert,extract}_d8_7 routines.
1370 (IF4A, IF4B): Use "D7" instead of "D7S".
1371 (IF4C, IF4D): Use "D8_7" instead of "D8".
1372 (IF4E, IF4F): New. Use "D8_6".
1373 (v850_opcodes): Use IF4A/IF4B for sld.b/sst.b. Use IF4C/IF4D for
1374 sld.h/sst.h. Use IF4E/IF4F for sld.w/sst.w.
1376 * v850-opc.c (insert_d16_15, extract_d16_15): New functions.
1377 (v850_operands): Change D16 to D16_15, use special insert/extract
1378 routines. New new D16 that uses the generic insert/extract code.
1379 (IF7A, IF7B): Use D16_15.
1380 (IF7C, IF7D): New. Use D16.
1381 (v850_opcodes): Use IF7C and IF7D for ld.b and st.b.
1383 * v850-opc.c (insert_d9, insert_d22): Slightly improve error
1384 message. Issue an error if the branch offset is odd.
1386 * v850-opc.c: Add notes about needing special insert/extract
1387 for all the load/store insns, except "ld.b" and "st.b".
1389 * v850-opc.c (insert_d22, extract_d22): New functions.
1390 (v850_operands): Use insert_d22 and extract_d22 for
1392 (insert_d9): Fix range check.
1394 Fri Aug 30 18:01:02 1996 J.T. Conklin <jtc@hippo.cygnus.com>
1396 * v850-opc.c (v850_operands): Add V850_OPERAND_SIGNED flag
1397 and set bits field to D9 and D22 operands.
1399 Thu Aug 29 11:10:46 1996 Jeffrey A Law (law@cygnus.com)
1401 * v850-opc.c (v850_operands): Define SR2 operand.
1402 (v850_opcodes): "ldsr" uses R1,SR2.
1404 * v850-opc.c (v850_opcodes): Fix opcode specs for
1405 sld.w, sst.b, sst.h, sst.w, and nop.
1407 Wed Aug 28 15:55:43 1996 Jeffrey A Law (law@cygnus.com)
1409 * v850-opc.c (v850_opcodes): Add null opcode to mark the
1410 end of the opcode table.
1413 Mon Aug 26 13:35:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1415 * d10v-opc.c (pre_defined_registers): Added register pairs,
1416 "r0-r1", "r2-r3", etc.
1419 Fri Aug 23 00:27:01 1996 Jeffrey A Law (law@cygnus.com)
1421 * v850-opc.c (v850_operands): Make I16 be a signed operand.
1422 Create I16U for an unsigned 16bit mmediate operand.
1423 (v850_opcodes): Use I16U for "ori", "andi" and "xori".
1425 * v850-opc.c (v850_operands): Define EP operand.
1426 (IF4A, IF4B, IF4C, IF4D): Use EP.
1428 * v850-opc.c (v850_opcodes): Fix opcode numbers for "mov"
1429 with immediate operand, "movhi". Tweak "ldsr".
1431 * v850-opc.c (v850_opcodes): Get ld.[bhw] and st.[bhw]
1432 correct. Get sld.[bhw] and sst.[bhw] closer.
1434 * v850-opc.c (v850_operands): "not" is a two byte insn
1436 * v850-opc.c (v850_opcodes): Correct bit pattern for setf.
1438 * v850-opc.c (v850_operands): D16 inserts at offset 16!
1440 * v850-opc.c (two): Get order of words correct.
1442 * v850-opc.c (v850_operands): I16 inserts at offset 16!
1444 * v850-opc.c (v850_operands): Add "SR1" and "SR2" for system
1445 register source and destination operands.
1446 (v850_opcodes): Use SR1 and SR2 for "ldsr" and "stsr".
1448 * v850-opc.c (v850_opcodes): Fix thinko in "jmp" opcode. Fix
1449 same thinko in "trap" opcode.
1451 * v850-opc.c (v850_opcodes): Add initializer for size field
1454 * v850-opc.c (v850_operands): D6 -> DS7. References changed.
1455 Add D8 for 8-bit unsigned field in short load/store insns.
1456 (IF4A, IF4D): These both need two registers.
1457 (IF4C, IF4D): Define. Use 8-bit unsigned field.
1458 (v850_opcodes): For "sld.h", "sld.w", "sst.h", "sst.w", use
1459 IF4C & IF4D. For "trap" use I5U, not I5. Add IF1 operand
1460 for "ldsr" and "stsr".
1461 * v850-opc.c (v850_operands): 3-bit immediate for bit insns
1464 * v850-opc.c (v850_opcodes): Correct short store half (sst.h) and
1465 short store word (sst.w).
1467 Thu Aug 22 16:57:27 1996 J.T. Conklin <jtc@rtl.cygnus.com>
1469 * v850-opc.c (v850_operands): Added insert and extract fields,
1470 pointers to functions that handle unusual operand encodings.
1472 Thu Aug 22 01:05:24 1996 Jeffrey A Law (law@cygnus.com)
1474 * v850-opc.c (v850_opcodes): Enable "trap".
1476 * v850-opc.c (v850_opcodes): Fix order of displacement
1477 and register for "set1", "clr1", "not1", and "tst1".
1479 Wed Aug 21 18:46:26 1996 Jeffrey A Law (law@cygnus.com)
1481 * v850-opc.c (v850_operands): Add "B3" support.
1482 (v850_opcodes): Fix and enable "set1", "clr1", "not1"
1485 * v850-opc.c (v850_opcodes): "jmp" has only an R1 operand.
1487 * v850-opc.c: Close unterminated comment.
1489 Wed Aug 21 17:31:26 1996 J.T. Conklin <jtc@hippo.cygnus.com>
1491 * v850-opc.c (v850_operands): Add flags field.
1492 (v850_opcodes): add move opcodes.
1494 Tue Aug 20 14:41:03 1996 J.T. Conklin <jtc@hippo.cygnus.com>
1496 * Makefile.in (ALL_MACHINES): Add v850-opc.o.
1497 * configure: (bfd_v850v_arch) Add new case.
1498 * configure.in: (bfd_v850_arch) Add new case.
1499 * v850-opc.c: New file.
1502 Mon Aug 19 15:21:38 1996 Doug Evans <dje@canuck.cygnus.com>
1504 * sparc-dis.c (print_insn_sparc): Handle little endian sparcs.
1506 Thu Aug 15 13:14:43 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1508 * d10v-opc.c: Add additional information to the opcode
1509 table to help determinine which instructions can be done
1512 Thu Aug 15 13:11:13 1996 Stan Shebs <shebs@andros.cygnus.com>
1514 * mpw-make.sed: Update editing of include pathnames to be
1517 Thu Aug 15 16:28:41 1996 James G. Smith <jsmith@cygnus.co.uk>
1519 * arm-opc.h: Added "bx" instruction definition.
1521 Wed Aug 14 17:00:04 1996 Richard Henderson <rth@tamu.edu>
1523 * alpha-opc.c (EV4EXTHWINDEX): Field width should be 8 not 5.
1525 Mon Aug 12 14:30:37 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1527 * d10v-opc.c (d10v_opcodes): Minor fixes to addi and bl.l.
1529 Fri Aug 9 13:21:59 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1531 * d10v-opc.c (d10v_opcodes): Correct 'mv' unit entry to EITHER.
1533 Thu Aug 8 12:43:52 1996 Klaus Kaempf <kkaempf@progis.de>
1535 * makefile.vms: Update for alpha-opc changes.
1537 Wed Aug 7 11:55:10 1996 Ian Lance Taylor <ian@cygnus.com>
1539 * i386-dis.c (print_insn_i386): Actually return the correct value.
1540 (ONE, OP_ONE): #ifdef out; not used.
1542 Fri Aug 2 17:47:03 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1544 * d10v-opc.c (d10v_opcodes): Added 2 accumulator sub instructions.
1545 Changed subi operand type to treat 0 as 16.
1547 Wed Jul 31 16:21:41 1996 Ian Lance Taylor <ian@cygnus.com>
1549 * m68k-opc.c: Add cpushl for the mcf5200. From Ken Rose
1552 Wed Jul 31 14:39:27 1996 James G. Smith <jsmith@cygnus.co.uk>
1554 * arm-opc.h: (arm_opcodes): Added halfword and sign-extension
1555 memory transfer instructions. Add new format string entries %h and %s.
1556 * arm-dis.c: (print_insn_arm): Provide decoding of the new
1559 Fri Jul 26 11:45:04 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1561 * d10v-opc.c (d10v_operands): Added UNUM4S; a 4-bit accumulator shift.
1562 (d10v_opcodes): Modified accumulator shift instructions to use UNUM4S.
1564 Fri Jul 26 14:01:43 1996 Ian Lance Taylor <ian@cygnus.com>
1566 * alpha-dis.c (print_insn_alpha_osf): Remove.
1567 (print_insn_alpha_vms): Remove.
1568 (print_insn_alpha): Make globally visible. Chose the register
1569 names based on info->flavour.
1570 * disassemble.c: Always return print_insn_alpha for the alpha.
1572 Thu Jul 25 15:24:17 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1574 * d10v-dis.c (dis_long): Handle unknown opcodes.
1576 Thu Jul 25 12:08:09 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1578 * d10v-opc.c: Changes to support signed and unsigned numbers.
1579 All instructions with the same name that have long and short forms
1580 now end in ".l" or ".s". Divs added.
1581 * d10v-dis.c: Changes to support signed and unsigned numbers.
1583 Tue Jul 23 11:02:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1585 * d10v-dis.c: Change all functions to use info->print_address_func.
1587 Mon Jul 22 15:38:53 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1589 * m68k-opc.c (m68k_opcodes): Make opcode masks for the ColdFire
1590 move ccr/sr insns more strict so that the disassembler only
1591 selects them when the addressing mode is data register.
1593 Mon Jul 22 11:25:24 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1594 * d10v-opc.c (pre_defined_registers): Declare.
1595 * d10v-dis.c (print_operand): Now uses pre_defined_registers
1596 to pick a better name for the registers.
1598 Mon Jul 22 13:47:23 1996 Ian Lance Taylor <ian@cygnus.com>
1600 * sparc-opc.c: Fix opcode values for fpack16, and fpackfix. Fix
1601 operands for fexpand and fpmerge. From Christian Kuehnke
1602 <Christian.Kuehnke@arbi.informatik.uni-oldenburg.de>.
1604 Mon Jul 22 13:17:06 1996 Richard Henderson <rth@tamu.edu>
1606 * alpha-dis.c (print_insn_alpha): No longer the user-visible
1607 print routine. Take new regnames and cpumask arguments.
1608 Kill the environment variable nonsense.
1609 (print_insn_alpha_osf): New function. Do OSF/1 style regnames.
1610 (print_insn_alpha_vms): New function. Do VMS style regnames.
1611 * disassemble.c (disassembler): Test bfd flavour to pick
1612 between OSF and VMS routines. Default to OSF.
1614 Thu Jul 18 17:19:34 1996 Ian Lance Taylor <ian@cygnus.com>
1616 * configure.in: Call AC_SUBST (INSTALL_SHLIB).
1617 * configure: Rebuild.
1618 * Makefile.in (install): Use @INSTALL_SHLIB@.
1620 Wed Jul 17 14:39:05 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1622 * configure: (bfd_d10v_arch) Add new case.
1623 * configure.in: (bfd_d10v_arch) Add new case.
1624 * d10v-dis.c: New file.
1625 * d10v-opc.c: New file.
1626 * disassemble.c (disassembler) Add entry for d10v.
1628 Wed Jul 17 10:12:05 1996 J.T. Conklin <jtc@rtl.cygnus.com>
1630 * m68k-opc.c (m68k_opcodes): Fix bugs in coldfire insns relating
1631 to bcc, trapfl, subxl, and wddata discovered by Andreas Schwab.
1633 Mon Jul 15 16:59:55 1996 Stu Grossman (grossman@critters.cygnus.com)
1635 * i386-dis.c: Get rid of print_insn_i8086. Use info.mach to
1636 distinguish between variants of the instruction set.
1637 * sparc-dis.c: Get rid of print_insn_sparclite. Use info.mach to
1638 distinguish between variants of the instruction set.
1640 Fri Jul 12 10:12:01 1996 Stu Grossman (grossman@critters.cygnus.com)
1642 * i386-dis.c (print_insn_i8086): New routine to disassemble using
1643 the 8086 instruction set.
1644 * i386-dis.c: General cleanups. Make most things static. Add
1645 prototypes. Get rid of static variables aflags and dflags. Pass
1646 them as args (to almost everything).
1648 Thu Jul 11 11:58:44 1996 Jeffrey A Law (law@cygnus.com)
1650 * h8300-dis.c (bfd_h8_disassemble): Handle macregs in ldmac insns.
1652 * h8300-dis.c (bfd_h8_disassemble): Handle "ldm.l" and "stm.l".
1654 * h8300-dis.c (bfd_h8_disassemble): "abs" is implicitly two
1655 if the next arg is marked with SRC_IN_DST. Gross.
1657 * h8300-dis.c (bfd_h8_disassemble): Print "exr" when
1658 we're looking for and find EXR.
1660 * h8300-dis.c (bfd_h8_disassemble): We don't have a match
1661 if we're looking for KBIT and we don't find it.
1663 * h8300-dis.c (bfd_h8_disassemble): Mask off unwanted bits
1666 * h8300-dis.c (bfd_h8_disassemble): Don't set plen for
1667 3bit immediate operands.
1669 Tue Jul 9 10:55:20 1996 Ian Lance Taylor <ian@cygnus.com>
1671 * Released binutils 2.7.
1673 * alpha-opc.c: Add new case of "mov". From Klaus Kaempf
1674 <kkaempf@progis.ac-net.de>.
1676 Thu Jul 4 11:42:51 1996 Ian Lance Taylor <ian@cygnus.com>
1678 * alpha-opc.c: Correct second case of "mov" to use OPRL.
1680 Wed Jul 3 16:03:47 1996 Stu Grossman (grossman@critters.cygnus.com)
1682 * sparc-dis.c (print_insn_sparclite): New routine to print
1683 sparclite instructions.
1685 Wed Jul 3 14:21:18 1996 J.T. Conklin <jtc@rtl.cygnus.com>
1687 * m68k-opc.c (m68k_opcodes): Add coldfire support.
1689 Fri Jun 28 15:53:51 1996 Doug Evans <dje@canuck.cygnus.com>
1691 * sparc-opc.c (asi_table): Add #ASI_N, #ASI_N_L, #ASI_NUCLEUS,
1692 #ASI_NUCLEUS_LITTLE. Rename #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_L
1693 to #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_LITTLE.
1695 Tue Jun 25 22:58:31 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
1697 * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir):
1698 Use autoconf-set values.
1699 (docdir, oldincludedir): Removed.
1700 * configure.in (AC_PREREQ): autoconf 2.5 or higher.
1702 Fri Jun 21 13:53:36 1996 Richard Henderson <rth@tamu.edu>
1704 * alpha-opc.c: New file.
1705 * alpha-opc.h: Remove.
1706 * alpha-dis.c: Complete rewrite to use new opcode table.
1707 * configure.in: For bfd_alpha_arch, use alpha-opc.o.
1708 * configure: Rebuild with autoconf 2.10.
1709 * Makefile.in (ALL_MACHINES): Add alpha-opc.o.
1710 (alpha-dis.o): Depend upon $(INCDIR)/opcode/alpha.h, not
1712 (alpha-opc.o): New target.
1714 Wed Jun 19 15:55:12 1996 Ian Lance Taylor <ian@cygnus.com>
1716 * sparc-dis.c (print_insn_sparc): Remove unused local variable i.
1717 Set imm_added_to_rs1 even if the source and destination register
1720 * sparc-opc.c: Add some two operand forms of the wr instruction.
1722 Tue Jun 18 15:58:27 1996 Jeffrey A. Law <law@rtl.cygnus.com>
1724 * h8300-dis.c (bfd_h8_disassemble): Rename "hmode" argument
1727 * disassemble.c (disassembler): Handle H8/S.
1728 * h8300-dis.c (print_insn_h8300s): New function for H8/S.
1730 Tue Jun 18 18:06:50 1996 Ian Lance Taylor <ian@cygnus.com>
1732 * sparc-opc.c: Add beq/teq as aliases for be/te.
1734 * ppc-opc.c: Fix fcmpo opcode. From Sergei Steshenko
1735 <sergei@msil.sps.mot.com>.
1737 Tue Jun 18 15:08:54 1996 Klaus Kaempf <kkaempf@progis.de>
1739 * makefile.vms: New file.
1741 * alpha-dis.c (print_insn_alpha): Print lda ra,lit(rz) as mov.
1743 Mon Jun 10 18:50:38 1996 Ian Lance Taylor <ian@cygnus.com>
1745 * h8300-dis.c (bfd_h8_disassemble): Always print ABS8MEM with :8,
1748 Tue Jun 4 09:15:53 1996 Doug Evans <dje@canuck.cygnus.com>
1750 * i386-dis.c (OP_OFF): Call append_prefix.
1752 Thu May 23 15:18:23 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1754 * ppc-opc.c (instruction encoding macros): Add explicit casts to
1755 unsigned long to silence a warning from the Solaris PowerPC
1758 Thu Apr 25 19:33:32 1996 Doug Evans <dje@canuck.cygnus.com>
1760 * sparc-opc.c (sparc_opcodes): Add ultrasparc vis extensions.
1762 Mon Apr 22 17:12:35 1996 Doug Evans <dje@blues.cygnus.com>
1764 * sparc-dis.c (X_IMM,X_SIMM): New macros.
1766 (print_insn_sparc): Merge cases i,I,j together. New cases X,Y.
1767 * sparc-opc.c (sparc_opcodes): Use X for 5 bit shift constants,
1768 Y for 6 bit shift constants. Rewrite entries for crdcxt, cwrcxt,
1769 cpush, cpusha, cpull sparclet insns.
1771 Wed Apr 17 14:20:22 1996 Doug Evans <dje@canuck.cygnus.com>
1773 * sparc-dis.c (compute_arch_mask): Replace ANSI style def with K&R.
1775 Thu Apr 11 17:30:02 1996 Ian Lance Taylor <ian@cygnus.com>
1777 * sparc-opc.c: Set F_FBR on floating point branch instructions.
1778 Set F_FLOAT on other floating point instructions.
1780 Mon Apr 8 17:02:48 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1782 * ppc-opc.c (PPC860): Macro for 860/821 specific instructions and
1784 (powerpc_opcodes): Add 860/821 specific SPRs.
1786 Mon Apr 8 14:00:44 1996 Ian Lance Taylor <ian@cygnus.com>
1788 * configure.in: Permit --enable-shared to specify a list of
1789 directories. Set and substitute BFD_PICLIST.
1790 * configure: Rebuild.
1791 * Makefile.in (BFD_PICLIST): Rename from BFD_LIST. Change all
1792 uses. Set to @BFD_PICLIST@.
1794 Fri Apr 5 17:12:27 1996 Jeffrey A Law (law@cygnus.com)
1796 * h8300-dis.c (bfd_h8_disassemble): Use "bit" for L_3 immediates,
1797 not "abs", which may be needed for the absolute in something
1798 like btst #0,@10:8. Print L_3 immediates separately from other
1799 immediates. Change ABSMOV reference to ABS8MEM.
1801 Wed Apr 3 10:40:45 1996 Doug Evans <dje@canuck.cygnus.com>
1803 * sparc-dis.c (opcodes_initialized): Move inside print_insn_sparc.
1804 (current_arch_mask): New static global.
1805 (compute_arch_mask): New static function.
1806 (print_insn_sparc): Delete sparc_v9_p. New static local
1807 current_mach. Resort opcode table if current_mach changes.
1808 Generalize "insn not supported" test.
1809 (compare_opcodes): Prefer supported opcodes to nonsupported ones.
1810 Delete test for v9/!v9.
1811 * sparc-opc.c (MASK_*): Use SPARC_OPCODE_ARCH_MASK.
1813 (brfc): Split into CBR and FBR for coprocessor/fp branches.
1814 (brfcx): Renamed to FBRX.
1815 (condfc): Renamed to CONDFC. Pass v6notlet to CBR (standard
1816 coprocessor mnemonics are not supported on the sparclet).
1817 (condf): Renamed to CONDF.
1818 (SLCBCC2): Delete F_ALIAS flag.
1820 Sat Mar 30 21:45:59 1996 Doug Evans <dje@canuck.cygnus.com>
1822 * sparc-opc.c (sparc_opcodes): rd must be 0 for
1823 mov foo,{%y,%psr,%wim,%tbr}. Support mov foo,%asrX.
1825 Fri Mar 29 13:02:40 1996 Ian Lance Taylor <ian@cygnus.com>
1827 * Makefile.in (config.status): Depend upon BFD VERSION file, so
1828 that the shared library version number is set correctly.
1830 Tue Mar 26 15:47:14 1996 Ian Lance Taylor <ian@cygnus.com>
1832 * configure.in: Use AC_CHECK_TOOL to find ar and ranlib. From
1833 Miles Bader <miles@gnu.ai.mit.edu>.
1834 * configure: Rebuild.
1836 Sat Mar 16 13:04:07 1996 Fred Fish <fnf@cygnus.com>
1838 * z8kgen.c (internal, gas): Call xmalloc rather than unchecked
1841 Tue Mar 12 12:14:10 1996 Ian Lance Taylor <ian@cygnus.com>
1843 * configure: Rebuild with autoconf 2.8.
1845 Thu Mar 7 15:11:10 1996 Doug Evans <dje@charmed.cygnus.com>
1847 * sparc-dis.c (print_insn_sparc): Handle 'O' operand char like 'r'.
1848 * sparc-opc.c (sparc_opcodes): Use 'O' operand char for `neg reg'.
1850 Tue Mar 5 15:51:57 1996 Ian Lance Taylor <ian@cygnus.com>
1852 * configure.in: Don't set SHLIB or SHLINK to an empty string,
1853 since they appear as targets in Makefile.in.
1854 * configure: Rebuild.
1856 Mon Feb 26 13:03:40 1996 Stan Shebs <shebs@andros.cygnus.com>
1858 * mpw-make.sed: Edit out shared library support bits.
1860 Tue Feb 20 20:48:28 1996 Doug Evans <dje@charmed.cygnus.com>
1862 * sparc-opc.c (v8,v6notv9): Add MASK_SPARCLET.
1863 (sparc_opcode_archs): Add MASK_V8 to sparclet entry.
1864 (sparc_opcodes): Add sparclet insns.
1865 (sparclet_cpreg_table): New static local.
1866 (sparc_{encode,decode}_sparclet_cpreg): New functions.
1867 * sparc-dis.c (print_insn_sparc): Handle sparclet cpregs.
1869 Tue Feb 20 11:02:44 1996 Alan Modra <alan@mullet.Levels.UniSA.Edu.Au>
1871 * i386-dis.c (index16): New static variable.
1872 (putop): Print jecxz for 32 bit case, jcxz for 16 bit, not the
1874 (OP_indirE): Return result of OP_E.
1875 (OP_E): Check for 16 bit addressing mode, and disassemble
1876 correctly. Optimised 32 bit case a little. Don't print
1877 "(base,index,scale)" when sib specifies only an offset.
1879 Mon Feb 19 12:32:17 1996 Ian Lance Taylor <ian@cygnus.com>
1881 * configure.in: Set and substitute SHLIB_DEP.
1882 * configure: Rebuild.
1883 * Makefile.in (SHLIB_DEP): New variable.
1884 (LIBIBERTY_LISTS, BFD_LIST): New variables.
1885 (stamp-piclist): Depend upon LIBIBERTY_LISTS and BFD_LIST. If
1886 COMMON_SHLIB, add them to piclist with appropriate modifications.
1887 ($(SHLIB)): Depend upon $(SHLIB_DEP). Don't check COMMON_SHLIB
1888 here: just use piclist.
1890 Mon Feb 19 02:03:50 1996 Doug Evans <dje@charmed.cygnus.com>
1892 * sparc-dis.c (MASK_V9,V9_ONLY_P,V9_P): Define.
1893 (print_insn_sparc): Rewrite v9/not-v9 tests.
1894 (compare_opcodes): Likewise.
1895 * sparc-opc.c (MASK_<ARCH>): Define.
1896 (v6,v7,v8,sparclite,v9,v9a): Redefine.
1897 (sparclet,v6notv9): Define.
1898 (sparc_opcode_archs): Delete member `conflicts'. Add `supported'.
1899 (sparc_opcodes): Delete F_NOTV9, use v6notv9 instead.
1901 Thu Feb 15 14:45:05 1996 Ian Lance Taylor <ian@cygnus.com>
1903 * configure.in: Call AC_PROG_CC before configure.host.
1904 * configure: Rebuild.
1906 * Makefile.in (SONAME): Remove leading ../bfd/ from $(SHLIB).
1908 Wed Feb 14 19:01:27 1996 Alan Modra <alan@spri.levels.unisa.edu.au>
1910 * i386-dis.c (onebyte_has_modrm): New static array.
1911 (twobyte_has_modrm): New static array.
1912 (print_insn_i386): Only fetch the mod/reg/rm byte if it is needed.
1914 Tue Feb 13 15:15:01 1996 Ian Lance Taylor <ian@cygnus.com>
1916 * Makefile.in ($(SHLINK)): Check ts against $(SHLIB), not
1919 Mon Feb 12 16:26:06 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1921 * ppc-opc.c (PPC): Undef, so default defination on Windows NT
1924 Wed Feb 7 13:59:54 1996 Ian Lance Taylor <ian@cygnus.com>
1926 * m68k-opc.c (m68k_opcodes): The bkpt instruction is supported on
1927 m68010up, not just m68020up | cpu32.
1929 * Makefile.in (SONAME): New variable.
1930 ($(SHLINK)): Make a link to the transformed name, as well.
1931 (stamp-tshlink): New target.
1932 (install): Skip stamp-tshlink during install.
1934 Tue Feb 6 12:28:54 1996 Ian Lance Taylor <ian@cygnus.com>
1936 * configure.in: Call AC_ARG_PROGRAM.
1937 * configure: Rebuild.
1938 * Makefile.in (program_transform_name): New variable.
1939 (install): Transform library name before installing it.
1941 Mon Feb 5 16:14:42 1996 Ian Lance Taylor <ian@cygnus.com>
1943 * i960-dis.c (mem): Add HX dcinva instruction.
1945 Support for building as a shared library, based on patches from
1946 Alan Modra <alan@spri.levels.unisa.edu.au>:
1947 * configure.in: Add AC_ARG_ENABLE for shared and commonbfdlib.
1948 New substitutions: ALLLIBS, PICFLAG, SHLIB, SHLIB_CC,
1949 SHLIB_CFLAGS, COMMON_SHLIB, SHLINK.
1950 * configure: Rebuild.
1951 * Makefile.in (ALLLIBS): New variable.
1952 (PICFLAG, SHLIB, SHLIB_CC, SHLIB_CFLAGS): New variables.
1953 (COMMON_SHLIB, SHLINK): New variables.
1954 (.c.o): If PICFLAG is set, compile twice, once PIC, once normal.
1955 (STAGESTUFF): Remove variable.
1956 (all): Depend upon $(ALLLIBS) rather than $(TARGETLIB).
1957 (stamp-piclist, piclist): New targets.
1958 ($(SHLIB), $(SHLINK)): New targets.
1959 ($(OFILES)): Depend upon stamp-picdir.
1960 (disassemble.o): Build twice if PICFLAG is set.
1961 (MOSTLYCLEAN): Add pic/*.o.
1962 (clean): Remove $(SHLIB), $(SHLINK), piclist, and stamp-piclist.
1963 (distclean): Remove pic and stamp-picdir.
1964 (install): Install shared libraries.
1965 (stamp-picdir): New target.
1967 Fri Feb 2 17:15:25 1996 Doug Evans <dje@charmed.cygnus.com>
1969 * sparc-dis.c (print_insn_sparc): Delete DISASM_RAW_INSN support.
1970 Print unknown instruction as "unknown", rather than in hex.
1972 Tue Jan 30 14:06:08 1996 Ian Lance Taylor <ian@cygnus.com>
1974 * dis-buf.c: Include "sysdep.h" before "dis-asm.h".
1976 Thu Jan 25 20:24:07 1996 Doug Evans <dje@charmed.cygnus.com>
1978 * sparc-opc.c (sparc_opcode_archs): Mark v8/sparclite as conflicting.
1980 Thu Jan 25 11:56:49 1996 Ian Lance Taylor <ian@cygnus.com>
1982 * i386-dis.c (print_insn_i386): Only fetch the mod/reg/rm byte
1983 when necessary. From Ulrich Drepper
1984 <drepper@myware.rz.uni-karlsruhe.de>.
1986 Thu Jan 25 03:39:10 1996 Doug Evans <dje@charmed.cygnus.com>
1988 * sparc-dis.c (print_insn_sparc): NUMOPCODES replaced with
1989 sparc_num_opcodes. Update architecture enum values.
1990 * sparc-opc.c (sparc_opcode_archs): Replaces architecture_pname.
1991 (sparc_opcode_lookup_arch): New function.
1992 (sparc_num_opcodes): Renamed from bfd_sparc_num_opcodes.
1993 (sparc_opcodes): Add v9a shutdown insn.
1995 Mon Jan 22 08:29:59 1996 Doug Evans <dje@charmed.cygnus.com>
1997 * sparc-dis.c (print_insn_sparc): Renamed from print_insn.
1998 If DISASM_RAW_INSN, print insn in hex. Handle v9a as opcode
2000 (print_insn_sparc64): Deleted.
2001 * disassemble.c (disassembler, case bfd_arch_sparc): Always use
2004 * sparc-opc.c (architecture_pname): Add v9a.
2006 Fri Jan 12 14:35:58 1996 David Mosberger-Tang <davidm@AZStarNet.com>
2008 * alpha-opc.h (alpha_insn_set): VAX floating point opcode was
2009 incorrectly defined as 0x16 when it should be 0x15.
2010 (FLOAT_FORMAT_MASK): function code is 11 bits, not just 7 bits!
2011 (alpha_insn_set): added cvtst and cvttq float ops. Also added
2012 excb (exception barrier) which is defined in the Alpha
2013 Architecture Handbook version 2.
2014 * alpha-dis.c (print_insn_alpha): Fixed special-case decoding for
2015 OPERATE_FORMAT_CODE type instructions. The bug caused mulq to be
2016 disassembled as or, for example.
2018 Wed Jan 10 12:37:22 1996 Ian Lance Taylor <ian@cygnus.com>
2020 * mips-dis.c (print_insn_arg): Print cases 'i' and 'u' in hex.
2021 (_print_insn_mips): Change i from int to unsigned int.
2023 Thu Jan 4 17:21:10 1996 David Edelsohn <edelsohn@mhpcc.edu>
2025 * ppc-opc.c (powerpc_opcodes): tlbi POWER opcode form different
2026 from tlbie PowerPC opcode. Add PPC603 tlbld and tlbli.
2028 Thu Dec 28 13:29:19 1995 John Hassey <hassey@rtp.dg.com>
2030 * i386-dis.c: Added Pentium Pro instructions.
2032 Tue Dec 19 22:56:35 1995 Michael Meissner <meissner@tiktok.cygnus.com>
2034 * ppc-opc.c (fsqrt{,.}): Duplicate for PowerPC in addition to
2037 Fri Dec 15 14:14:15 1995 J.T. Conklin <jtc@rtl.cygnus.com>
2039 * sh-opc.h (sh_nibble_type): Added REG_B.
2040 (sh_arg_type): Added A_REG_B.
2041 (sh_table): Added pref and bank reg versions of ldc, ldc.l, stc
2043 * sh-dis.c (print_insn_shx): Added cases for REG_B and A_REG_B.
2045 Fri Dec 15 16:44:31 1995 Ian Lance Taylor <ian@cygnus.com>
2047 * disassemble.c (disassembler): Use new bfd_big_endian macro.
2049 Tue Dec 12 12:22:24 1995 Ian Lance Taylor <ian@cygnus.com>
2051 * Makefile.in (distclean): Remove stamp-h. From Ronald
2052 F. Guilmette <rfg@monkeys.com>.
2054 Tue Dec 5 13:42:44 1995 Stan Shebs <shebs@andros.cygnus.com>
2056 From David Mosberger-Tang <davidm@azstarnet.com>:
2057 * alpha-dis.c (print_insn_alpha): fixed decoding of cpys
2060 Mon Dec 4 12:29:05 1995 J.T. Conklin <jtc@rtl.cygnus.com>
2062 * sh-opc.h (sh_arg_type): Added A_SSR and A_SPC.
2063 (sh_table): Added many SH3 opcodes.
2064 * sh-dis.c (print_insn_shx): Added cases for A_SSR and A_SPC.
2066 Fri Dec 1 07:42:18 1995 Michael Meissner <meissner@tiktok.cygnus.com>
2068 * ppc-opc.c (subfc., subfco): Mark this PPCCOM, not PPC.
2069 (subco,subco.): Mark this PPC, not PPCCOM.
2071 Mon Nov 27 13:09:52 1995 Ian Lance Taylor <ian@cygnus.com>
2073 * configure: Rebuild with autoconf 2.7.
2075 Tue Nov 21 18:28:06 1995 Ian Lance Taylor <ian@cygnus.com>
2077 * configure: Rebuild with autoconf 2.6.
2079 Wed Nov 15 19:02:53 1995 Ken Raeburn <raeburn@cygnus.com>
2081 * configure.in: Sort list of architectures. Accept but do nothing
2082 for alliant, convex, pyramid, romp, and tahoe.
2084 Wed Nov 8 20:18:59 1995 Ian Lance Taylor <ian@cygnus.com>
2086 * a29k-dis.c (print_special): Change num to unsigned int.
2088 Wed Nov 8 20:10:35 1995 Eric Freudenthal <freudenthal@nyu.edu>
2090 * a29k-dis.c (print_insn): Cast insn24 to unsigned long when
2093 Tue Nov 7 15:21:06 1995 Ian Lance Taylor <ian@cygnus.com>
2095 * configure.in: Call AC_CHECK_PROG to find and cache AR.
2096 * configure: Rebuilt.
2098 Mon Nov 6 17:39:47 1995 Harry Dolan <dolan@ssd.intel.com>
2100 * configure.in: Add case for bfd_i860_arch.
2101 * configure: Rebuild.
2103 Fri Nov 3 12:45:31 1995 Ian Lance Taylor <ian@cygnus.com>
2105 * m68k-opc.c (m68k_opcodes): Correct fmoveml operands.
2106 * m68k-dis.c (NEXTSINGLE): Change i to unsigned int.
2107 (NEXTDOUBLE): Likewise.
2108 (print_insn_m68k): Don't match fmoveml if there is more than one
2109 register in the list.
2110 (print_insn_arg): Handle a place of '8' for a type of 'L'.
2112 Thu Nov 2 23:06:33 1995 Ian Lance Taylor <ian@cygnus.com>
2114 * m68k-opc.c: Use #W rather than #w.
2115 * m68k-dis.c (print_insn_arg): Handle new 'W' place.
2117 Wed Nov 1 13:30:24 1995 Ian Lance Taylor <ian@cygnus.com>
2119 * m68k-opc.c (m68k_opcode_aliases): Add dbfw as an alias for dbf,
2120 and likewise for all the dbxx opcodes.
2122 Mon Oct 30 20:50:40 1995 Fred Fish <fnf@cygnus.com>
2124 * arc-dis.c: Include elf-bfd.h rather than libelf.h.
2126 Mon Oct 23 11:11:34 1995 James G. Smith <jsmith@pasanda.cygnus.co.uk>
2128 * mips-opc.c: Added shorthand (V1) for INSN_4100 manifest. Added
2129 the VR4100 specific instructions to the mips_opcodes structure.
2131 Thu Oct 19 11:05:23 1995 Stan Shebs <shebs@andros.cygnus.com>
2133 * mpw-config.in, mpw-make.sed: Remove ugly workaround for
2134 ugly Metrowerks bug in CW6, is fixed in CW7.
2136 Mon Oct 16 12:59:01 1995 Michael Meissner <meissner@tiktok.cygnus.com>
2138 * ppc-opc.c (whole file): Add flags for common/any support.
2140 Tue Oct 10 11:06:07 1995 Fred Fish <fnf@cygnus.com>
2142 * Makefile.in (BISON): Remove macro.
2143 (FLAGS_TO_PASS): Remove BISON.
2145 Fri Oct 6 16:26:45 1995 Ken Raeburn <raeburn@cygnus.com>
2147 Mon Sep 25 22:49:32 1995 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2149 * m68k-dis.c (print_insn_m68k): Recognize all two-word
2150 instructions that take no args by looking at the match mask.
2151 (print_insn_arg): Always print "%" before register names.
2152 [case 'c']: Use "nc" for the no-cache case, as recognized by gas.
2153 [case '_']: Don't print "@#" before address.
2154 [case 'J']: Use "%s" as format string, not register name.
2155 [case 'B']: Treat place == 'C' like 'l' and 'L'.
2157 Thu Oct 5 22:16:20 1995 Ken Raeburn <raeburn@cygnus.com>
2159 * i386-dis.c: Describe cmpxchg8b operand, and spell the opcode
2162 Tue Oct 3 08:30:20 1995 steve chamberlain <sac@slash.cygnus.com>
2164 From David Mosberger-Tang <davidm@azstarnet.com>
2166 * alpha-opc.h (MEMORY_FUNCTION_FORMAT_MASK): added.
2167 (alpha_insn_set): added definitions for VAX floating point
2168 instructions (Unix compilers don't generate these, but handcoded
2169 assembly might still use them).
2171 * alpha-dis.c (print_insn_alpha): added support for disassembling
2172 the miscellaneous instructions in the Alpha instruction set.
2174 Tue Sep 26 18:47:20 1995 Stan Shebs <shebs@andros.cygnus.com>
2176 * mpw-config.in: Add m68k-opc.c.o to BFD_MACHINES for m68k,
2177 no longer create sysdep.h, sed ppc-opc.c to work around a
2178 serious Metrowerks C bug.
2179 * mpw-make.in: Remove.
2180 * mpw-make.sed: New file, used by mpw-configure to edit
2181 Makefile.in into an MPW makefile.
2183 Wed Sep 20 12:55:28 1995 Ian Lance Taylor <ian@cygnus.com>
2185 * Makefile.in (maintainer-clean): New synonym for realclean.
2187 Tue Sep 19 15:28:36 1995 Ian Lance Taylor <ian@cygnus.com>
2189 * m68k-opc.c: Split pmove patterns which use 'P' into patterns
2190 which use '0', '1', and '2' instead. Specify the proper size for
2191 a pmove immediate operand. Correct the pmovefd patterns to be
2192 moves to a register, not from a register.
2193 * m68k-dis.c (print_insn_arg): Replace 'P' with '0', '1', '2'.
2195 Thu Sep 14 11:58:22 1995 Doug Evans <dje@canuck.cygnus.com>
2197 * sparc-opc.c (sparc_opcodes): Mark all insns that reference
2198 %psr, %wim, %tbr as F_NOTV9.
2200 Fri Sep 8 01:07:38 1995 Ian Lance Taylor <ian@cygnus.com>
2202 * Makefile.in (Makefile): Just rebuild Makefile when running
2204 (config.h, stamp-h): New targets.
2205 * configure.in: Call AC_CONFIG_HEADER and AC_CANONICAL_SYSTEM
2206 earlier. Don't bother to call AC_ARG_PROGRAM. Touch stamp-h when
2207 rebuilding config.h.
2208 * configure: Rebuild.
2210 * mips-opc.c: Change unaligned loads and stores with "t,A"
2211 operands to use "t,A(b)".
2213 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2215 * sh-dis.c (print_insn_shx): Add F_FR0 support.
2217 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2219 * sh-dis.c (print_insn_shx): Change loop over op->arg[n] to iterate
2220 until 3 instead of until 2.
2222 Wed Sep 6 21:21:33 1995 Ian Lance Taylor <ian@cygnus.com>
2224 * Makefile.in (ALL_CFLAGS): Define.
2225 (.c.o, disassemble.o): Use $(ALL_CFLAGS).
2226 (MOSTLYCLEAN): Add config.log.
2227 (distclean): Don't remove config.log.
2228 * configure.in: Substitute HDEFINES.
2229 * configure: Rebuild.
2231 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2233 * sh-opc.h (sh_arg_type): Add F_FR0.
2234 (sh_table, case fmac): Add F_FR0 as first argument.
2236 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2238 * sh-opc.h (sh_opcode_info): Increase arg array size to 4.
2240 Tue Sep 5 18:28:10 1995 Doug Evans <dje@canuck.cygnus.com>
2242 * sparc-dis.c: Remove all references to NO_V9.
2244 Tue Sep 5 20:03:26 1995 Ian Lance Taylor <ian@cygnus.com>
2246 * aclocal.m4: Just include ../bfd/aclocal.m4.
2247 * configure: Rebuild.
2249 Tue Sep 5 16:09:59 1995 Doug Evans <dje@canuck.cygnus.com>
2251 * sparc-dis.c (X_DISP19): Define.
2252 (print_insn, case 'G'): Use it.
2253 (print_insn, case 'L'): Sign extend displacement.
2255 Mon Sep 4 14:28:46 1995 Ian Lance Taylor <ian@cygnus.com>
2257 * configure.in: Run ../bfd/configure.host before AC_PROG_CC.
2258 Subsitute CFLAGS and AR. Call AC_PROG_INSTALL. Don't substitute
2259 host_makefile_frag or frags.
2260 * aclocal.m4: New file.
2261 * configure: Rebuild.
2262 * Makefile.in (INSTALL): Set to @INSTALL@.
2263 (INSTALL_PROGRAM): Set to @INSTALL_PROGRAM@.
2264 (INSTALL_DATA): Set to @INSTALL_DATA@.
2266 (AR_FLAGS): Set to rc rather than qc.
2267 (CC): Define as @CC@.
2268 (CFLAGS): Set to @CFLAGS@.
2269 (@host_makefile_frag@): Remove.
2270 (config.status): Remove dependency upon @frags@.
2272 * configure.in: ../bfd/config.bfd now just sets shell variables.
2273 Use them rather than looking through target Makefile fragments.
2274 * configure: Rebuild.
2276 Thu Aug 31 12:35:32 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2278 * sh-opc.h (ftrc): Change FPUL_N to FPUL_M.
2280 Wed Aug 30 13:52:28 1995 Doug Evans <dje@canuck.cygnus.com>
2282 * sparc-opc.c (sparc_opcodes): Delete duplicate wr %y insn.
2283 Add clrx, iprefetch, signx, clruw, cas, casl, casx, casxl synthetic
2286 * sparc-opc.c (sparc_opcodes): Fix prefetcha insn.
2287 (lookup_{name,value}): New functions.
2288 (prefetch_table): New static local.
2289 (sparc_{encode,decode}_prefetch): New functions.
2290 * sparc-dis.c (print_insn): Handle '*' arg (prefetch function).
2292 Wed Aug 30 11:11:58 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2294 * sh-opc.h: Add blank lines to improve readabililty of sh3e
2297 Wed Aug 30 11:09:38 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2299 * sh-dis.c: Correct comment on first line of file.
2301 Tue Aug 29 15:37:18 1995 Doug Evans <dje@canuck.cygnus.com>
2303 * disassemble.c (disassembler): Handle bfd_mach_sparc64.
2305 * sparc-opc.c (asi, membar): New static locals.
2306 (sparc_{encode,decode}_{asi,membar}): New functions.
2307 (sparc_opcodes, membar insn): Fix.
2308 * sparc-dis.c (print_insn): Call sparc_decode_asi.
2309 Support decoding of membar masks.
2312 Sat Aug 26 21:22:48 1995 Ian Lance Taylor <ian@cygnus.com>
2314 * m68k-opc.c (m68k_opcode_aliases): Add br, brs, brb, brw, brl.
2316 Mon Aug 21 17:33:36 1995 Ian Lance Taylor <ian@cygnus.com>
2318 * m68k-opc.c (m68k_opcode_aliases): Add bhib as an alias for bhis,
2319 and likewise for the other branches. Add bhs as an alias for bcc,
2320 and likewise for the size variants. Add dbhs as an alias for
2323 Fri Aug 11 13:40:24 1995 Jeff Law (law@snake.cs.utah.edu)
2325 * sh-opc.h (FP sts instructions): Update to match reality.
2327 Mon Aug 7 16:12:58 1995 Ian Lance Taylor <ian@cygnus.com>
2329 * m68k-dis.c: (fpcr_names): Add % before all register names.
2330 (reg_names): Likewise.
2331 (print_insn_arg): Don't explicitly print % before register names.
2332 Add % before register names in static array names. In case 'r',
2333 print data registers as `@(Dn)', not `Dn@'. When printing a
2334 memory address, don't print @# before it.
2335 (print_indexed): Change base_disp and outer_disp from int to
2336 bfd_vma. Print using MIT syntax, not mutant invalid Motorola
2337 syntax. Sign extend 8 byte displacement correctly.
2338 (print_base): Print using MIT syntax. Print zpc when appropriate.
2339 Change parameter disp from int to bfd_vma.
2341 * m68k-opc.c (m68k_opcode_aliases): Add jsrl and jsrs as aliases
2344 Mon Aug 7 02:21:40 1995 Jeff Law (law@snake.cs.utah.edu)
2346 * sh-dis.c (print_insn_shx): Handle new operand types F_REG_N,
2347 F_REG_M, FPSCR_M, FPSCR_N, FPUL_M and FPUL_N.
2348 * sh-opc.h (sh_arg_type): Add new operand types.
2349 (sh_table): Add new opcodes from SH3E Floating Point ISA.
2351 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
2353 * Makefile.in (distclean): Remove generated file config.h.
2355 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
2357 * Makefile.in (distclean): Remove generated file config.h.
2359 Wed Aug 2 18:33:40 1995 Ian Lance Taylor <ian@cygnus.com>
2361 * m68k-opc.c: New file, holding tables from include/opcode/m68k.h.
2363 * m68k-dis.c: Remove BREAK_UP_BIG_DECL stuff.
2365 (print_insn_m68k): Change d to be const. Use m68k_numopcodes
2366 rather than numopcodes. Use m68k_opcodes rather than removed
2367 opcode function. Don't check F_ALIAS.
2368 (print_insn_arg): Change first parameter to be const char *.
2369 * Makefile.in (ALL_MACHINES): Add m68k-opc.o.
2370 (m68k-opc.o): New target.
2371 * configure.in: Build m68k-opc.o for bfd_m68k_arch.
2372 * configure: Rebuild.
2374 Wed Aug 2 08:23:38 1995 Doug Evans <dje@canuck.cygnus.com>
2376 * sparc-dis.c (HASH_SIZE, HASH_INSN): Define.
2377 (opcode_bits, opcode_hash_table): New variables.
2378 (opcodes_initialized): Renamed from opcodes_sorted.
2379 (build_hash_table): New function.
2380 (is_delayed_branch): Use hash table.
2381 (print_insn): Renamed from print_insn_sparc, made static.
2382 Build and use hash table. If !sparc64, ignore sparc64 insns,
2383 and vice-versa if sparc64.
2384 (print_insn_sparc, print_insn_sparc64): New functions.
2385 (compare_opcodes): Move sparc64 opcodes to end.
2386 Print commutative insns with constant second.
2387 * sparc-opc.c (all non-v9 insns): Use flag F_NOTV9 instead of F_ALIAS.
2389 Tue Aug 1 00:12:49 1995 Ian Lance Taylor <ian@cygnus.com>
2391 * sh-dis.c (print_insn_shx): Remove unused local dslot. Use
2392 print_address_func for A_BDISP12 and A_BDISP8. Correct test which
2393 avoids printing a delay slot in a delay slot.
2394 * sh-opc.h (sh_table): Fully bracket last entry.
2396 Mon Jul 31 12:04:47 1995 Doug Evans <dje@canuck.cygnus.com>
2398 * sparc-opc.c (sllx, srax, srlx): Fix disassembly.
2400 Wed Jul 12 00:59:34 1995 Ken Raeburn <raeburn@kr-pc.cygnus.com>
2402 * configure.in: Get host_makefile_frag from ${srcdir}.
2404 * configure.in: Autoconfiscated. Check for string[s].h. Create
2405 config.h from config.in. Don't set up sysdep.h link.
2406 * sysdep.h: New file.
2407 * configure, config.in: New files, generated from configure.in.
2408 * Makefile.in: Updated to be processed autoconf-style.
2409 (distclean): Keep sysdep.h. Remove config.log and config.cache.
2410 (Makefile): Depend on config.status.
2411 (config.status): New rule.
2412 * configure.bat: Update Makefile substitutions.
2414 Tue Jul 11 14:23:37 1995 Jeff Spiegel <jeffs@lsil.com>
2416 * mips-opc.c (L1): Define.
2417 (mips_opcodes): Add R4010 instructions: flushi, flushd, flushid,
2418 addciu, madd, maddu, ffc, ffs, msub, msubu, selsi, selsr, waiti,
2421 Tue Jul 11 11:49:49 1995 Ian Lance Taylor <ian@cygnus.com>
2423 * mips-opc.c (mips_opcodes): For the move pseudo-op, prefer daddu
2424 if ISA 3 and addu otherwise, replacing or, since some MIPS chips
2425 have multiple add units but only a single logical unit.
2427 * ppc-opc.c (powerpc_operands): Change CR to use a bitsize of 3,
2428 shifted by 18, without any insertion or extraction function.
2429 (insert_cr, extract_cr): Remove.
2431 Wed Jun 21 20:05:39 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
2433 * m68k-dis.c (print_insn_arg, print_indexed): Print "%" before
2436 Thu Jun 15 17:23:31 1995 Stan Shebs <shebs@andros.cygnus.com>
2438 * mpw-config.in: Add sh and i386 configs, remove sparc config.
2439 * sh-opc.h: Add copyright.
2441 Mon Jun 5 03:30:43 1995 Ken Raeburn <raeburn@kr-laptop.cygnus.com>
2443 * Makefile.in (crunch-m68k): Delete extra target accidentally
2444 checked in a while ago.
2446 Wed May 24 16:22:13 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2448 * sh-opc.h (sh_table): Add SH3 support.
2450 Wed May 24 14:16:08 1995 Steve Chamberlain <sac@slash.cygnus.com>
2452 * sh-opc.h: Added bsrf and braf.
2454 Wed May 10 14:28:16 1995 Richard Earnshaw (rearnsha@armltd.co.uk)
2456 * arm-opc.h (arm_opcodes): Add 64-bit multiply patterns. Delete
2457 bogus [ls]fm{ea,fd} patterns.
2459 * arm-opc.h (arm_opcodes): Correct typos in stm, ldm, std, and ldc.
2460 * arm-dis.c (print_insn_arm): Make GIVEN a parameter, don't try and
2461 initialize it from memory. Make function static.
2462 (print_insn_{big,little}_arm): New functions.
2463 * disassemble.c (disassembler, case bfd_arch_arm): Disassemble for
2464 the correct endianness.
2466 Mon Apr 24 14:18:05 1995 Jason Molenda (crash@phydeaux.cygnus.com>
2468 * sh-opc.h (sh_nibble_type, sh_arg_type): remove trailing , from
2471 Wed Apr 19 14:07:03 1995 Michael Meissner <meissner@tiktok.cygnus.com>
2473 * m68k-dis.c (opcode): Finish change made by Kung Hsu on April
2474 17th, so that it builds again using GCC as the compiler.
2476 Tue Apr 18 12:14:51 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
2478 * mips-dis.c (print_insn_little_mips): Cast return value from
2479 bfd_getl32 from bfd_vma to unsigned long, because _print_insn_mips
2480 expects an unsigned long, and that might be fewer words of
2481 argument storage (e.g., if bfd_vma is long long on a 32-bit
2483 (print_insn_big_mips): Likewise with bfd_getb32 value.
2484 (_print_insn_mips): Now static.
2486 Mon Apr 17 12:23:28 1995 Kung Hsu <kung@rtl.cygnus.com>
2488 * m68k-dis.c: Take out #define BREAK_UP_BIG_DECL kludge, because
2489 gcc memory hog problem with initializer is fixed.
2491 Mon Apr 10 15:55:01 1995 Stan Shebs <shebs@andros.cygnus.com>
2493 Merge in support for Mac MPW as a host.
2494 (Old change descriptions retained for informational value.)
2496 * mpw-config.in (archname): Compute from the config.
2497 (BFD_MACHINES, ARCHDEFS): Put into mk.tmp.
2499 * mpw-config.in (target_arch): Compute from canonical target.
2500 (m68k, mips, powerpc, sparc): Add architectures.
2501 * mpw-make.in (disassemble.c.o): Add.
2502 (ALL_CFLAGS): Remove special flags (-mc68020 -mc68881 -model far).
2504 * mpw-config.in (BFD_MACHINES): Set to a default value.
2505 * mpw-make.in (BFD_MACHINES): Remove wired-in value.
2507 * mpw-make.in (CSEARCH): Add extra-include to search path.
2509 * mpw-config.in (varargs.h): Don't create.
2510 (sysdep.h): Create using forward-include.
2511 * mpw-make.in (CSEARCH): Add include/mpw to search path.
2513 * mpw-config.in: New file, MPW version of configure.in.
2514 * mpw-make.in: New file, MPW version of Makefile.in.
2516 Fri Mar 31 14:23:38 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
2518 * alpha-dis.c (print_insn_alpha): Put empty statement after
2521 Tue Mar 21 10:51:40 1995 Jeff Law (law@snake.cs.utah.edu)
2523 * hppa-dis.c (sign_extend): Delete, redundant with libhppa.h version.
2524 (low_sign_extend): Likewise.
2525 (get_field): Delete unused function.
2526 (set_field, deposit_14, deposit_21): Likewise.
2528 Fri Mar 17 15:55:53 1995 J.T. Conklin <jtc@rtl.cygnus.com>
2530 * i386-dis.c: Support for more pentium opcodes. From Guy Harris
2533 Tue Mar 14 00:52:57 1995 Ken Raeburn (raeburn@kr-pc.cygnus.com)
2535 Sat Feb 11 17:22:41 1995 Klaus Kaempf (kkaempf@didymus.rmi.de)
2537 * alpha-opc.h (OSF_ASMCODE): define
2538 print pal-code names as defined in App C of the
2539 Alpha Architecture Reference Manual
2541 * alpha-dis.c: cleaned up output
2542 print stylized code forms as defined in App A.4.3 of the
2543 Alpha Architecture Reference Manual
2545 Wed Mar 8 15:21:14 1995 Ian Lance Taylor <ian@cygnus.com>
2547 * mips-opc.c: Add new mips4 instructions. Don't set INSN_RFE for
2549 * mips-dis.c (print_insn_arg): Handle new argument types 'h', 'R',
2552 Wed Mar 8 02:54:05 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
2554 * m68k-dis.c (opcode): New function. Returns address of opcode
2555 table entry given index, even if the opcode table was split to
2556 work around gcc bugs.
2557 (print_insn_m68k): Call opcode instead of referencing m68k_opcodes
2559 (BREAK_UP_BIG_DECL): Make secondary array static and const.
2560 (reg_names): Now const.
2561 (print_insn_arg): Arrays cacheFieldName and names now const.
2562 (print_indexed): Array scales now const.
2564 Tue Mar 7 16:41:21 1995 Ian Lance Taylor <ian@cygnus.com>
2566 * ppc-opc.c: Sort recently added instructions by minor opcode
2567 number within major opcode number.
2569 Mon Mar 6 10:04:36 1995 Jeff Law (law@snake.cs.utah.edu)
2571 * hppa-dis.c: Include libhppa.h.
2573 Fri Feb 24 19:15:36 1995 Ian Lance Taylor <ian@cygnus.com>
2575 * mips-opc.c: Change dli to use M_DLI, and add dla.
2577 Mon Feb 20 23:54:38 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2579 * Makefile.in (ALL_MACHINES): Add w65-dis.o.
2581 Thu Feb 16 17:34:41 1995 Ian Lance Taylor <ian@cygnus.com>
2583 * mips-opc.c: Add r4650 mul instruction.
2585 Wed Feb 15 15:45:20 1995 Ian Lance Taylor <ian@cygnus.com>
2587 * mips-opc.c: Add uld and usd macros for unaligned double load and
2590 Tue Feb 14 13:17:37 1995 Michael Meissner <meissner@tiktok.cygnus.com>
2592 * ppc-opc.c (powerpc_opcodes): Add 403GA opcodes rfci, dccci,
2593 mfdcr, mtdcr, icbt, iccci.
2595 Thu Feb 9 12:28:13 1995 Stan Shebs <shebs@andros.cygnus.com>
2597 * i960-dis.c (struct tabent, struct sparse_tabent): Change the
2598 signed char fields to shorts, more portable.
2600 Wed Feb 8 17:29:29 1995 Stan Shebs <shebs@andros.cygnus.com>
2602 * i960-dis.c (struct tabent, struct sparse_tabent): Declare the
2603 char fields as signed chars, since they may have negative values.
2605 Mon Feb 6 10:52:06 1995 J.T. Conklin <jtc@rtl.cygnus.com>
2607 * i386-dis.c (dis386_twobyte): Add cpuid, From Charles Hannum
2608 (mycroft@netbsd.org).
2610 Mon Jan 30 12:38:00 1995 Ian Lance Taylor <ian@cygnus.com>
2612 From "Logg, Ed" <elogg@ea.com>:
2613 * ppc-opc.c (extract_bdm): Correct parenthezisation.
2614 * ppc-dis.c (print_insn_powerpc): Print .long before unrecognized
2617 Thu Jan 26 18:32:08 1995 Ian Lance Taylor <ian@cygnus.com>
2619 * ppc-opc.c: Changes based on patch from David Edelsohn
2620 <edelsohn@mhpcc.edu>.
2621 (powerpc_operands): Add operands SPRBAT and SPRG. Split TBR out of
2624 (insert_tbr): New static function.
2625 (extract_tbr): New static function.
2626 (XFXFXM_MASK, XFXM): Define.
2627 (XSPRBAT_MASK, XSPRG_MASK): Define.
2628 (powerpc_opcodes): Add instructions to access special registers by
2629 name. Add mtcr and mftbu.
2631 Tue Jan 17 10:56:43 1995 Ian Lance Taylor <ian@sanguine.cygnus.com>
2633 * mips-opc.c (P3): Define.
2634 (mips_opcodes): Add mad and madu.
2636 Sun Jan 15 16:32:59 1995 Steve Chamberlain <sac@splat>
2638 * configure.in: Add W65 support.
2639 * disassemble.c: Likewise.
2640 * w65-opc.h, w65-dis.c: New files.
2642 Wed Dec 28 22:15:33 1994 Steve Chamberlain (sac@jonny.cygnus.com)
2644 * h8300-dis.c (bfd_h8_disassemble): Add support for 2 bit
2647 Tue Dec 20 11:25:12 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2649 * mips-opc.c: Add dli as a synonym for li.
2651 Thu Dec 8 18:23:31 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
2653 * alpha-dis.c (print_insn_alpha): Handle call_pal instruction, and
2654 print something for reserved opcode values, even if it won't
2657 * mips-dis.c (_print_insn_mips): When initializing, shift right
2658 and mask, to avoid sign extension problems on the Alpha.
2660 * m68k-dis.c (print_insn_arg, case 'J'): Handle buscr and pcr
2663 Wed Nov 23 22:34:51 1994 Steve Chamberlain (sac@jonny.cygnus.com)
2665 * sh-opc.h (mov.l gbr): Get direction right.
2666 * sh-dis.c (print_insn_shx): New function.
2667 (print_insn_shl, print_insn_sh): Call print_insn_shx to
2668 print opcodes with right byte order.
2670 Thu Nov 3 19:32:22 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
2672 * ns32k-dis.c (struct ns32k_option): Renamed from struct option,
2673 to avoid conflicts with getopt.
2675 Mon Oct 31 18:48:10 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2677 * hppa-dis.c (print_insn_hppa): Read the instruction using
2678 bfd_getb32, so that it works on a little endian or 64 bit host.
2679 Remove unused local variable op.
2681 Tue Oct 25 17:07:57 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2683 * mips-opc.c: Use or instead of addu for pseudo-op move, since
2684 addu does not work correctly if -mips3.
2686 Wed Oct 19 13:40:16 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2688 * a29k-dis.c (print_special): Add special register names defined
2689 on 29030, 29040 and 29050.
2690 (print_insn): Handle new operand type 'I'.
2692 Wed Oct 12 11:59:55 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2694 * Makefile.in (INSTALL): Use top level install.sh script.
2696 Wed Oct 5 19:16:29 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2698 * sparc-dis.c: Rewrite to use bitfields, rather than a union, so
2699 that it works on a little endian host.
2701 Tue Oct 4 12:14:21 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2703 * configure.in: Use ${config_shell} when running config.bfd.
2705 Wed Sep 21 18:49:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
2707 * mips-opc.c (mips_opcodes): "dabs" is only available with -mips3.
2709 Thu Sep 15 16:30:22 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
2711 * a29k-dis.c (print_insn): Print the opcode.
2713 Wed Sep 14 17:52:14 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
2715 * mips-opc.c (mips_opcodes): Set WR_t for sc and scd.
2717 Sun Sep 11 22:32:17 1994 Jeff Law (law@snake.cs.utah.edu)
2719 * hppa-dis.c (reg_names): Use r26-r23 for arg0-arg3.
2721 Tue Sep 6 11:37:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
2723 * mips-opc.c: Set INSN_STORE_MEMORY flag for all instructions
2724 which store a value into memory.
2726 Sun Sep 04 17:58:10 1994 Richard Earnshaw (rwe@pegasus.esprit.ec.org)
2728 * configure.in, Makefile.in, disassemble.c: Add support for the ARM.
2729 * arm-dis.c, arm-opc.h: New files.
2731 Fri Aug 5 14:00:05 1994 Stan Shebs (shebs@andros.cygnus.com)
2733 * Makefile.in (ns32k-dis.o): Add dependency.
2734 * ns32k-dis.c (print_insn_arg): Declare initialized local as
2735 string, not as array of chars.
2737 Thu Jul 28 18:14:16 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
2739 * sparc-dis.c (print_insn_sparc): Handle new operand type 'x'.
2741 * sparc-opc.c: Added sparclite extended FP operations, and
2742 versions of v9 impdep* instructions permitting specification of
2745 Tue Jul 26 16:36:03 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
2747 * i960-dis.c (reg_names): Now const.
2748 (struct sparse_tabent): New type, copied from array type in mem
2750 (ctrl): Local static array ctrl_tab now const.
2751 (cobr): Local static array cobr_tab now const.
2752 (mem): Local variables reg1, reg2, reg3 now point to const. Local
2753 static variable mem_tab no longer explicitly initialized. Changed
2754 mem_init to const array of struct sparse_tabent.
2755 (reg): Local static variable reg_tab no longer explicitly
2756 initialized. Changed reg_init to const array of struct
2758 (ea): Local static array scale_tab now const.
2760 * i960-dis.c (reg): Added i960JX instructions to reg_init table.
2763 Tue Jul 19 21:00:00 1994 DJ Delorie (dj@ctron.com)
2765 * configure.bat: the disassember needs to be enabled for
2766 "objdump -d" to work in djgpp.
2768 Wed Jul 13 18:01:58 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
2770 * ns32k-dis.c: Deleted all code in "#ifdef GDB".
2771 (invalid_float): Enabled general version, doesn't require running
2772 on ns32k host. Changed to take char* argument, and test for
2773 explicitly specified sizes, instead of using sizeof() on host CPU
2775 (INVALID_FLOAT): Cast first argument.
2776 (opt_u, opt_U, opt_O, opt_C, opt_S, list_P532, list_M532,
2777 list_P032, list_M032): Now const.
2778 (optlist, list_search): Made appropriate arguments now point to
2780 (print_insn_arg): Changed static array of one-character-string
2781 pointers into a static const array of characters; fixed sprintf
2782 statement accordingly.
2784 Sun Jul 10 00:27:47 1994 Ian Dall (dall@hfrd.dsto.gov.au)
2786 * opcodes/ns32k-dis.c: Semi-new file. Had apparently been dropped
2787 from distribution. A ns32k-dis.c from a previous distribution has
2788 been brought up to date and supports the new interface.
2790 * disassemble.c: define ARCH_ns32k and add case bfd_arch_ns32k.
2792 * configure.in: add bfd_ns32k_arch target support.
2794 * Makefile.in: add ns32k-dis.o to ALL_MACHINES.
2795 Add ns32k-dis.c to CFILES. Add dependencies for ns32k-dis.o.
2797 Wed Jun 29 22:10:37 1994 Steve Chamberlain (sac@cygnus.com)
2799 * h8300-dis.c (bfd_h8_disassemble): Get 16bit branch
2802 Tue Jun 28 13:22:06 1994 Stan Shebs (shebs@andros.cygnus.com)
2804 * h8300-dis.c, mips-dis.c: Don't use true and false.
2806 Thu Jun 23 12:53:19 1994 David J. Mackenzie (djm@rtl.cygnus.com)
2808 * configure.in: Change --with-targets to --enable-targets.
2810 Wed Jun 22 13:38:32 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
2812 * mips-dis.c (_print_insn_mips): Build a static hash table mapping
2813 opcodes to the first instruction with that opcode, to speed
2814 disassembly of large files. From ralphc@pyramid.com (Ralph
2817 Tue Jun 7 12:49:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2819 * Makefile.in (mostlyclean): Fix typo (was mostyclean).
2821 Wed May 11 22:32:00 1994 DJ Delorie (dj@ctron.com)
2823 * configure.bat: update to latest makefile.in
2825 Sat May 7 17:13:21 1994 Steve Chamberlain (sac@cygnus.com)
2827 * a29k-dis.c (print_insn): Print 'x' type operand in hex.
2828 * h8300-dis.c (bfd_h8_disassemble): Print 16bit rels correctly.
2829 * sh-dis.c (print_insn_sh): Don't recur endlessly if delay
2830 slot insn is in a delay slot.
2831 * z8k-opc.h: (resflg): Fix patterns.
2832 * h8500-opc.h Fix CR insn patterns.
2834 Fri May 6 14:34:46 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2836 * ppc-opc.c (powerpc_opcodes): Put PowerPC versions of "cmp" and
2837 "cmpl" before POWER versions, so that gas -many uses them.
2839 Thu Apr 28 18:32:36 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
2841 * disassemble.c: New file.
2842 * Makefile.in (OFILES): Add disassemble.o.
2843 (disassemble.o): Provide dependencies; compile with $(ARCHDEFS).
2844 * configure.in: Define ARCHDEFS in Makefile. Code taken from
2845 binutils/configure.in.
2847 * m68k-dis.c (print_insn_m68k): If F_ALIAS flag is set, skip the
2848 opcode being examined.
2850 Thu Apr 21 17:08:40 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2852 * ppc-opc.c (powerpc_operands): Added RAL, RAM and RAS.
2853 (insert_ral, insert_ram, insert_ras): New functions.
2854 (powerpc_opcodes): Use RAL for load with update, RAM for lmw, and
2855 RAS for store with update.
2857 Sat Apr 16 23:41:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2859 * ppc-opc.c (powerpc_opcodes): Correct fcir. From David Edelsohn
2860 (edelsohn@npac.syr.edu).
2862 Wed Apr 6 17:11:45 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2864 * mips-opc.c (mips_opcodes): Correct operands of "nor" with an
2867 Mon Apr 4 16:30:46 1994 Doug Evans (dje@canuck.cygnus.com)
2869 * sparc-opc.c (sparc_opcodes): Fix "rd %fprs,%l0".
2871 Mon Apr 4 13:22:00 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2873 * ppc-opc.c (powerpc_operands): The signedp field has been
2874 removed, so don't initialize it. Set the PPC_OPERAND_SIGNED flag
2875 instead. Add new operand SISIGNOPT.
2876 (powerpc_opcodes): For lis, liu, addis, and cau use SISIGNOPT.
2877 Based on patch from David Edelsohn (edelsohn@npac.syr.edu).
2878 * ppc-dis.c (print_insn_powerpc): Check PPC_OPERAND_SIGNED rather
2881 Wed Mar 30 00:31:49 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2883 * i386-dis.c (struct private): Renamed to dis_private. `private'
2884 is a reserved word for dynix cc.
2886 Mon Mar 28 13:00:15 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2888 * configure.in: Change error message to refer to bfd/config.bfd
2889 rather than bfd/configure.in.
2891 Mon Mar 28 12:28:30 1994 David Edelsohn (edelsohn@npac.syr.edu)
2893 * ppc-opc.c: Define POWER2 as short alias flag.
2894 (powerpc_opcodes): Add POWER/2 opcodes lfq*, stfq*, fcir[z], and
2897 Wed Mar 23 12:23:05 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2899 * i960-dis.c (print_insn_i960): Don't read a second word for
2900 opcodes 0, 1, 2 and 3.
2902 Wed Mar 16 15:37:58 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2904 * configure.in: Don't build m68881-ext.o for bfd_m68k_arch.
2906 Mon Mar 14 14:53:50 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2908 * m68881-ext.c: Removed; no longer used.
2909 * Makefile.in: Changed accordingly.
2911 * m68k-dis.c (ext_format_68881): Don't declare.
2912 (print_insn_m68k): If an instruction uses place 'i', it uses at
2913 least four fixed bytes.
2914 (print_insn_arg): Don't bump p by 2 for case 'I', place 'i'. For
2915 extended float, convert to double using floatformat_to_double, not
2916 ieee_extended_to_double, and fetch the data before converting it.
2918 Tue Mar 8 18:12:25 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2920 * mips-opc.c: It's sqrt.s, not sqrt.w. From
2921 davidj@ICSI.Berkeley.EDU (David Johnson).
2923 Tue Feb 8 16:55:27 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2925 * ppc-opc.c (powerpc_opcodes): The POWER uses bdn[l][a] where the
2926 PowerPC uses bdnz[l][a].
2928 Tue Feb 8 00:32:28 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2930 * dis-buf.c, i386-dis.c: Include sysdep.h.
2932 Mon Feb 7 19:22:23 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2934 * configure.in (bfd_powerpc_arch): Use ppc-dis.o and ppc-opc.o.
2936 * ppc-opc.c (powerpc_opcodes): Mark POWER instructions supported
2937 by Motorola PowerPC 601 with PPC_OPCODE_601.
2938 * ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc):
2939 Disassemble Motorola PowerPC 601 instructions as well as normal
2940 PowerPC instructions.
2942 Sun Feb 6 07:45:17 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
2944 * i960-dis.c (reg, mem): Just use a static array instead of
2947 Sat Feb 5 00:04:02 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
2949 * hppa-dis.c (print_insn_hppa): For '?' and '@' only adjust the
2950 condition name index if this is for a negated condition.
2952 * hppa-dis.c (print_insn_hppa): No space before 'H' operand.
2953 Floating point format for 'H' operand is backwards from normal
2954 case (0 == double, 1 == single). For '4', '6', '7', '9', and '8'
2955 operands (fmpyadd and fmpysub), handle bizarre register
2956 translation correctly for single precision format.
2958 * hppa-dis.c (print_insn_hppa): Do not emit a space after 'F'
2959 or 'I' operands if the next format specifier is 'M' (fcmp
2960 condition completer).
2962 Feb 4 23:38:03 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2964 * ppc-opc.c (powerpc_operands): New operand type MBE to handle a
2965 single number giving a bitmask for the MB and ME fields of an M
2966 form instruction. Change NB to accept 32, and turn it into 0;
2967 also turn 0 into 32 when disassembling. Seperated SH from NB.
2968 (insert_mbe, extract_mbe): New functions.
2969 (insert_nb, extract_nb): New functions.
2970 (SC_MASK): Mask out SA and LK bits.
2971 (powerpc_opcodes): Change "cal" to use RT, D, RA rather than RT,
2972 RA, SI. Change "liu" and "cau" to use UI rather than SI. Mark
2973 "bctr" and "bctrl" as accepted by POWER. Change "rlwimi",
2974 "rlimi", "rlwimi.", "rlimi.", "rlwinm", "rlinm", "rlwinm.",
2975 "rlinm.", "rlmi", "rlmi.", "rlwnm", "rlnm", "rlwnm.", "rlnm." to
2976 use MBE rather than MB. Add "mfmq" and "mtmq" POWER instructions.
2977 (powerpc_macros): Define table of macro definitions.
2978 (powerpc_num_macros): Define.
2980 * ppc-dis.c (print_insn_powerpc): Don't skip optional operands
2981 if PPC_OPERAND_NEXT is set.
2983 Sat Jan 22 23:10:07 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2985 * i960-dis.c (print_insn_i960): Make buffer bfd_byte instead of
2986 char. Retrieve contents using bfd_getl32 instead of shifting.
2988 Fri Jan 21 19:01:39 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2990 * ppc-opc.c: New file. Opcode table for PowerPC, including
2991 opcodes for POWER (RS/6000).
2992 * ppc-dis.c: New file. PowerPC and Power (RS/6000) disassembler.
2993 * Makefile.in (ALL_MACHINES): Add ppc-dis.o and ppc-opc.o.
2994 (CFILES): Add ppc-dis.c.
2995 (ppc-dis.o, ppc-opc.o): New targets.
2996 * configure.in: Build ppc-dis.o and ppc-opc.o for bfd_rs6000_arch.
2998 Mon Jan 17 20:05:49 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
3000 * hppa-dis.c (print_insn_hppa): Handle 'N' in assembler template.
3001 No space before 'u', 'f', or 'N'.
3003 Sun Jan 16 14:20:16 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
3005 * i386-dis.c (print_insn_i386): Add FIXME comment regarding reading
3006 farther than we should.
3008 * i386-dis.c (dis386): Use Yb and Yv for scasb and scasS.
3010 Thu Jan 6 12:38:05 1994 David J. Mackenzie (djm@thepub.cygnus.com)
3012 * sparc-dis.c m68k-dis.c alpha-dis.c a29k-dis.c: Fix comments.
3014 Wed Jan 5 11:56:21 1994 David J. Mackenzie (djm@thepub.cygnus.com)
3016 * i960-dis.c (print_insn_i960): Only read word2 if the instruction
3017 needs it, to prevent reading past the end of a section.
3019 Wed Nov 17 17:20:12 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3021 * mips-opc.h: Use macro for j instruction, to support SVR4 PIC.
3022 Removed t,A case for la; always use t,A(b) case.
3024 Mon Nov 8 12:37:36 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3026 From Ted Lemen <mellon@pepper.ncd.com>
3027 * mips-dis.c (print_insn_arg): Handle 'k'.
3028 * mips-opc.c: Make cache use k, not t.
3030 Sun Nov 7 23:52:34 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3032 * alpha-opc.h, alpha-dis.c (print_insn_alpha): Add
3033 FLOAT_MEMORY_FORMAT_CODE, FLOAT_BRANCH_FORMAT_CODE, correct
3034 FLOAT_FORMAT_CODE to put out floating point register names.
3036 Mon Nov 1 18:17:51 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3038 * mips-opc.c: Use macros for jal variants, to support SVR4 PIC.
3040 Thu Oct 28 17:42:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3042 * a29k-dis.c (print_insn): Use 0x%08x, not 0x%8x.
3044 Wed Oct 27 11:48:01 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3046 * mips-opc.c (dsll, dsra, dsrl): Added '>' cases for shift counts
3047 larger than 32. Moved dsxx32 variants first for disassembler.
3049 Mon Oct 25 11:33:14 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
3051 * z8kgen.c, z8k-opc.h: Add full lda information.
3053 Tue Oct 19 12:39:25 1993 Jeffrey A Law (law@cs.utah.edu)
3055 * hppa-dis.c (print_insn_hppa): Do not emit a space after
3056 movb instructions. Any necessary space will be emitted by
3057 the code to handle nullification completers.
3059 Wed Oct 13 16:19:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3061 * mips-opc.c: Moved l.d down so that it disassembles as ldc1.
3063 Fri Oct 8 02:34:21 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3065 * alpha-opc.h: Add ldl_l, fix typo for ldq_u.
3066 * alpha-dis.c (print_insn_alpha): Add code for PAL_FORMAT_CODE.
3068 Tue Oct 5 17:47:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3070 * mips-opc.c: Correct lwu opcode value (book had it wrong).
3072 Thu Sep 30 11:26:18 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
3074 * z8k-dis.c (FETCH_DATA): get just the right amount of data.
3075 (unpack_instr): Cope with ARG_IMM4M1 type instructions.
3077 Wed Sep 29 16:24:49 1993 K. Richard Pixley (rich@sendai.cygnus.com)
3079 * m88k-dis.c (m88kdis): comment change. Remove space after
3081 (printop): handle new arg types DEC and XREG for m88110.
3083 Tue Sep 28 19:20:16 1993 Jeffrey A Law (law@snake.cs.utah.edu)
3085 * hppa-dis.c (print_insn_hppa): Handle 'z' operand
3086 type for absolute branch addresses. Delete special
3087 "ble" and "be" code in 'W' operand code.
3089 Fri Sep 24 14:08:33 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3091 * mips-opc.c: Set hazard information correctly for branch
3092 likely instructions.
3094 Fri Sep 17 04:41:17 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3096 * alpha-dis.c (print_insn_alpha), alpha-opc.h: Fix bugs, use
3097 info->fprintf_func for printing and info->print_address_func for
3100 Wed Sep 15 12:12:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3102 * mips-opc.c: Set INSN_TRAP for tXX instructions.
3104 Thu Sep 9 10:11:27 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3106 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson):
3107 Corrected second case of "b" for disassembler.
3109 Tue Sep 7 14:25:15 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3111 * mips-dis.c, m88k-dis.c: Don't include libbfd.h. Changed calls
3112 to BFD swapping routines to correspond to BFD name changes.
3114 Thu Sep 2 10:35:25 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3116 * mips-opc.c: Change div machine instruction to be z,s,t rather
3117 than s,t. Change div macro to be d,v,t rather than d,s,t.
3118 Likewise for divu, ddiv, ddivu. Added z,s,t case for drem, dremu,
3119 rem and remu which generates only the corresponding div
3120 instruction. This is for compatibility with the MIPS assembler,
3121 which only generates the simple machine instruction when an
3122 explicit destination of $0 is used.
3123 * mips-dis.c (print_insn_arg): Handle 'z' (always register zero).
3125 Thu Aug 26 17:41:44 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3127 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Set
3128 WR_31 hazard for bal, bgezal, bltzal.
3130 Thu Aug 26 17:20:02 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3132 * hppa-dis.c (print_insn_hppa): Use print function
3133 from within the disassemble_info, not fprintf_filtered.
3135 Wed Aug 25 13:51:40 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3137 * hppa-dis.c (print_insn_hppa): Handle '|' like '>'. (From Jeff
3138 Law, law@cs.utah.edu.)
3140 Mon Aug 23 12:44:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3142 * mips-opc.c ("absu"): Removed.
3145 Fri Aug 20 10:52:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3147 * mips-opc.c: Added r6000 and r4000 instructions and macros.
3148 Changed hazard information to distinguish between memory load
3149 delays and coprocessor load delays.
3151 Wed Aug 18 15:39:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3153 * mips-opc.c: li.d uses "T,L", not "S,F". Added li.s.
3155 Tue Aug 17 09:44:42 1993 David J. Mackenzie (djm@thepub.cygnus.com)
3157 * configure.in: Don't pass cpu to config.bfd.
3159 Tue Aug 17 12:23:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3161 * m88k-dis.c (m88kdis): Make class unsigned.
3163 Thu Aug 12 15:08:18 1993 Ian Lance Taylor (ian@cygnus.com)
3165 * alpha-dis.c (print_insn_alpha): One branch format case was
3166 missing the instruction name.
3168 Wed Aug 11 19:29:39 1993 David J. Mackenzie (djm@thepub.cygnus.com)
3170 * Makefile.in (ALL_MACHINES): Renamed from DIS_LIBS.
3171 Add the arch-specific auxiliary files.
3172 (OFILES): Remove the arch-specific auxiliary files
3173 and use BFD_MACHINES instead of DIS_LIBS.
3174 * configure.in: Set BFD_MACHINES based on --with-targets option.
3176 Thu Aug 12 12:04:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3178 * mips-opc.c: Added lwc1 E,A(b) to go with lwc1 T,A(b). Similarly
3181 Sun Aug 8 15:09:30 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3183 * sparc-opc.c: Change CONST to const to deal with gcc
3184 -Dconst=__const -traditional.
3186 Fri Aug 6 10:58:55 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3188 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Took
3189 coprocessor instructions out of #if 0, and made them use new
3192 Thu Aug 5 17:11:06 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3194 * sparc-dis.c: Include ansidecl.h before opcodes/sparc.h.
3196 Fri Jul 30 18:48:15 1993 John Gilmore (gnu@cygnus.com)
3198 * sparc-opc.c: Add F_JSR, F_UNBR, or F_CONDBR flags to each branch
3199 instruction, for use by the disassembler.
3201 * sparc-dis.c (SEX): Add sign extension macro. Replace many
3202 hand-coded sign extensions that depended on 32-bit host ints.
3203 FIXME, we still depend on big-endian host bitfield ordering.
3204 (sparc_print_insn): Set the insn_info_valid field, and the
3205 other fields that describe the instruction being printed.
3207 Tue Jul 27 17:04:58 1993 Jim Wilson (wilson@sphagnum.cygnus.com)
3209 * sparc-opc.c (call): Accept all 6 addressing modes valid for
3210 `jmp' instead of just one of them.
3212 Wed Jul 21 11:43:32 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
3214 * hppa-dis.c: Move floating registers from reg_names to fp_reg_names.
3215 (fput_fp_reg_r): Renamed from fput_reg_r.
3216 (fput_fp_reg): New function.
3217 (print_insn_hppa): Use fput_fp_reg{,_r} where appropriate.
3219 * hppa-dis.c (print_insn_hppa, cases 'a', 'd'): Print space afterwards.
3221 * hppa-dis.c (print_insn_hppa, case 'd'): Use GET_COND not GET_FIELD.
3223 Mon Jul 19 13:52:21 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
3225 * hppa-dis.c (print_insn_hppa): Use extract_5r_store for 'r'.
3227 * hppa-dis.c (print_insn_hppa, case '>'): If next character is 'n',
3228 don't output a space.
3230 * hppa-dis.c (float_format_names): 10 is undefined, and 11 is quad.
3232 Sun Jul 18 16:30:02 1993 Jim Kingdon (kingdon@rtl.cygnus.com)
3234 * mips-opc.c: New file, containing opcode table from
3235 ../include/opcode/mips.h.
3236 * Makefile.in: Add it.
3238 Thu Jul 15 12:37:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3240 * m88k-dis.c: New file, moved in from gdb and changed to use the
3241 new dis-asm.h disassembler interface.
3242 * Makefile.in (DIS_LIBS): Added m88k-dis.o.
3243 (m88k-dis.o): New target.
3245 Tue Jul 13 10:04:16 1993 Ian Lance Taylor (ian@cygnus.com)
3247 * mips-dis.c (print_insn_arg, _print_insn_mips): Made pointer to
3248 argument string const char * to correspond to opcode/mips.h.
3250 Tue Jul 6 15:18:37 1993 Ian Lance Taylor (ian@cygnus.com)
3252 * mips-dis.c: Updated to account for name changes in new version
3254 * Makefile.in: Added header file dependencies.
3256 Sat Jul 3 23:47:56 1993 Doug Evans (dje@canuck.cygnus.com)
3258 * h8300-dis.c (bfd_h8_disassemble): Correct fetching of instruction.
3260 Thu Jul 1 12:23:38 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3262 * m68k-dis.c (NEXTWORD, NEXTLONG): Use ((x) ^ 0x8000) - 0x8000 to sign
3263 extend, rather than shifts.
3265 Sun Jun 20 20:56:56 1993 Ken Raeburn (raeburn@poseidon.cygnus.com)
3267 * Makefile.in: Undo 15 June change.
3269 Fri Jun 18 14:15:15 1993 Per Bothner (bothner@deneb.cygnus.com)
3271 * m68k-dis.c (print_insn_arg): Change return value to byte count
3273 * m68k-dis.c: Re-write to detect invalid operands before
3274 printing anything, so we can handle this the same way we
3275 handle invalid opcodes.
3277 Thu Jun 17 15:01:36 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
3279 * sh-dis.c, sh-opc.h: Understand some more opcodes.
3281 Wed Jun 16 13:48:05 1993 Ian Lance Taylor (ian@cygnus.com)
3283 * hppa-dis.c: Include <ansidecl.h> and sysdep.h before other
3286 Tue Jun 15 21:45:26 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3288 * sparc-dis.c: Don't declare qsort, since sysdep.h might.
3290 * configure.in: Do make sysdep.h link.
3291 * Makefile.in: Search ../include. Don't search ../bfd.
3293 Tue Jun 15 13:36:10 1993 Stu Grossman (grossman@cygnus.com)
3295 Changes from Jeff Law, law@cs.utah.edu:
3296 * hppa-dis.c: Fix typo. 'a' and 'd' were reversed.
3297 Do not print a space before the completers specified by
3300 Fri Jun 11 18:40:21 1993 Ken Raeburn (raeburn@cygnus.com)
3302 * mips-dis.c: No longer need to bomb out if HOST_64_BIT is
3303 defined, since gdb has been fixed.
3305 Changes from Jeff Law, law@cs.utah.edu:
3306 * hppa-dis.c (print_insn_hppa): Last argument to fput_reg,
3307 fput_reg_r, fput_creg, fput_const, and fputs_filtered should
3308 be a *disassemble_info, not a *FILE.
3309 * hppa-dis.c: Support 'd', '!', and 'a'.
3310 * hppa-dis.c: Support 's' to extract a 2 bit space register.
3311 * hppa-dis.c: Delete cases which are no longer needed.
3313 Fri Jun 11 07:53:48 1993 Jim Kingdon (kingdon@cygnus.com)
3315 * m68k-dis.c (print_insn_{m68k,arg}): Add MMU codes.
3317 Tue Jun 8 12:25:01 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
3319 * h8300-dis.c: New file, removed from bfd/cpu-h8300.c, with
3322 Mon Jun 7 12:58:49 1993 Per Bothner (bothner@rtl.cygnus.com)
3324 * Makefile.in (CSEARCH): Add -I../bfd for sysdep.h and bfd.h.
3325 * configure.in: No longer need to configure to get sysdep.h.
3327 Thu Jun 3 15:56:49 1993 Stu Grossman (grossman@cygnus.com)
3329 * Patches from Jeffrey Law <law@cs.utah.edu>.
3330 * hppa-dis.c: Support 'I', 'J', and 'K' in output
3331 templates for 1.1 FP computational instructions.
3333 Tue May 25 13:05:48 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3335 * h8500-dis.c (print_insn_h8500): Address argument is type
3337 * z8k-dis.c (print_insn_z8k, print_insn_z8001, print_insn_z8002):
3340 * h8500-opc.h (addr_class_type): No comma at end of enumerator.
3341 * sh-opc.h (sh_nibble_type, sh_arg_type): Ditto.
3343 * sparc-dis.c (compare_opcodes): Move static declaration to
3346 Fri May 21 14:17:37 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3348 * sparc-dis.c (print_insn_sparc): Implement 'n' argument for unimp
3349 instruction, remove unimp hack from 'l' argument.
3351 Wed May 19 15:35:54 1993 Stu Grossman (grossman@cygnus.com)
3353 * z8k-dis.c (fetch_data): Use unsigned char to make ancient gcc's
3356 Fri May 14 15:22:46 1993 Ian Lance Taylor (ian@cygnus.com)
3358 * Based on patches from davidj@ICSI.Berkeley.EDU (David Johnson):
3359 * mips-dis.c (print_insn_arg): Handle 'C' for general coprocessor
3362 Fri May 14 00:09:14 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3364 * hppa-dis.c: Include dis-asm.h before sysdep.h. Changed some
3365 arrays of string pointers to 2-d arrays of chars, to save
3368 Thu May 6 20:51:17 1993 Fred Fish (fnf@cygnus.com)
3370 * a29k-dis.c, alpha-dis.c, i960-dis.c, sparc-dis.c, z8k-dis.c:
3371 Cast second arg to read_memory_func to "bfd_byte *", as necessary.
3373 Tue May 4 20:31:10 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3375 * hppa-dis.c: New file from Utah, adapted to new disassembler
3377 * Makefile.in: Include it.
3379 Mon Apr 26 18:17:42 1993 Steve Chamberlain (sac@thepub.cygnus.com)
3381 * sh-dis.c, sh-opc.h: New files.
3383 Fri Apr 23 18:51:22 1993 Steve Chamberlain (sac@thepub.cygnus.com)
3385 * alpha-dis.c, alpha-opc.h: New files.
3387 Tue Apr 6 12:54:08 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3389 * mips-dis.c: Sign extend 'j' and 'b' arguments, delta is a signed
3392 Mon Apr 5 17:37:37 1993 John Gilmore (gnu@cygnus.com)
3394 * sparc-dis.c: Make "ta" the default trap instruction, "t" the alias.
3396 Fri Apr 2 07:24:27 1993 Ian Lance Taylor (ian@cygnus.com)
3398 * a29k-dis.c, sparc-dis.c, sparc-opc.c: Use CONST rather than
3401 Thu Apr 1 11:20:43 1993 Jim Kingdon (kingdon@cygnus.com)
3403 * sparc-dis.c: Use fprintf_func a few places where I forgot,
3404 and double percent signs a few places.
3406 * a29k-dis.c, i960-dis.c: New, merged from gdb and binutils.
3408 * i386-dis.c, m68k-dis.c, mips-dis.c, sparc-dis.c:
3409 Use info->print_address_func not print_address.
3411 * dis-buf.c (generic_print_address): New function.
3413 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3415 * Makefile.in: Add sparc-dis.c.
3416 sparc-dis.c: New file, merges binutils and gdb versions as follows:
3418 Add `add' instruction to the set that get checked
3419 for a preceding `sethi' in order to print an absolute address.
3420 * (print_insn): Disassembly prefers real instructions.
3421 (is_delayed_branch): Speed up.
3422 * sparc-opcode.h: Add ALIAS bit to aliases. Fix up opcode tables.
3423 Still missing some float ops, and needs testing.
3424 * sparc-pinsn.c (print_insn): Eliminate 'set' test, subsumed by
3425 F_ALIAS. Use printf, not fprintf, when not passing a file
3427 (compare_opcodes): Check that identical instructions have
3428 identical opcodes, complain otherwise.
3431 * Include reg_names.
3433 Use dis-asm.h/read_memory_func interface.
3435 Wed Mar 31 20:49:06 1993 K. Richard Pixley (rich@rtl.cygnus.com)
3437 * h8500-dis.c, i386-dis.c, m68k-dis.c, z8k-dis.c (fetch_data):
3438 deliberately return non-zero to setjmp from longjmp. Otherwise
3439 this code fails to compile.
3441 Wed Mar 31 17:04:31 1993 Stu Grossman (grossman@cygnus.com)
3443 * m68k-dis.c: Fix prototype for fetch_arg().
3445 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3447 * dis-buf.c: New file, for new read_memory_func interface.
3448 Makefile.in (OFILES): Include it.
3449 m68k-dis.c, i386-dis.c, h8500-dis.c, mips-dis.c, z8k-dis.c:
3450 Use new read_memory_func interface.
3452 Mon Mar 29 14:02:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
3454 * h8500-dis.c (print_insn_h8500): Get sign of fp offsets right.
3455 * h8500-opc.h: Fix couple of opcodes.
3457 Wed Mar 24 02:03:36 1993 david d `zoo' zuhn (zoo at poseidon.cygnus.com)
3459 * Makefile.in: add dvi & installcheck targets
3461 Mon Mar 22 18:55:04 1993 John Gilmore (gnu@cygnus.com)
3463 * Makefile.in: Update for h8500-dis.c.
3465 Fri Mar 19 14:27:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
3467 * h8500-dis.c, h8500-opc.h: New files
3469 Thu Mar 18 14:12:37 1993 Per Bothner (bothner@rtl.cygnus.com)
3471 * mips-dis.c, z8k-dis.c: Converted to use interface defined in
3472 ../include/dis-asm.h.
3473 * m68k-dis.c: New file (merge of ../binutils/m68k-pinsn.c
3474 and ../gdb/m68k-pinsn.c).
3475 * i386-dis.c: New file (merge of ../binutils/i386-pinsn.c
3476 and ../gdb/i386-pinsn.c).
3477 * m68881-ext.c: New file. Moved definition of
3478 ext_format ext_format_68881 from ../gdb/m68k-tdep.c.
3479 * Makefile.in: Adjust for new files.
3480 * i386-dis.c: Patches from John Hassey (hassey@dg-rtp.dg.com).
3481 * m68k-dis.c: Recognize '9' placement code, so (say) pflush
3482 can be dis-assembled.
3484 Wed Feb 17 09:19:47 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3486 * mips-dis.c (print_insn_arg): Now returns void.
3488 Mon Jan 11 16:09:16 1993 Fred Fish (fnf@cygnus.com)
3490 * mips-dis.c (ansidecl.h): Include for benefit of sysdep.h
3491 files that use the macros.
3493 Thu Jan 7 13:15:17 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3495 * mips-dis.c: New file, from gdb/mips-pinsn.c.
3496 * Makefile.in (DIS_LIBS): Added mips-dis.o.
3497 (CFILES): Added mips-dis.c.
3499 Thu Jan 7 07:36:33 1993 Steve Chamberlain (sac@thepub.cygnus.com)
3501 * z8k-dis.c (print_insn_z8001, print_insn_z8002): new routines
3502 * z8kgen.c, z8k-opc.h: fix sizes of some shifts.
3504 Tue Dec 22 15:42:44 1992 Per Bothner (bothner@rtl.cygnus.com)
3506 * Makefile.in: Improve *clean rules.
3507 * configure.in: Allow a default host.
3509 Tue Nov 17 19:53:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
3511 * Makefile.in: also use -I$(srcdir)/../bfd, since some sysdep
3512 files include other sysdep files
3514 Thu Nov 12 16:10:37 1992 Steve Chamberlain (sac@thepub.cygnus.com)
3516 * z8k-dis.c z8k-opc.h z8kgen.c: checkpoint
3518 Fri Oct 9 04:56:05 1992 John Gilmore (gnu@cygnus.com)
3520 * configure.in: For host support, use ../bfd/configure.host
3521 so it stays in sync with the ../bfd/hosts database.
3523 Thu Oct 1 23:38:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
3525 * configure.in: use cpu-vendor-os triple instead of nested cases
3527 Wed Sep 30 16:09:20 1992 Michael Werner (mtw@cygnus.com)
3529 * z8k-dis.c (unparse_instr): fix bug where opcode returned was
3530 *always* the wrong one.
3532 Wed Sep 30 07:42:17 1992 Steve Chamberlain (sac@thepub.cygnus.com)
3534 * z8kgen.c: added copyright info
3536 Tue Sep 29 12:20:21 1992 Steve Chamberlain (sac@thepub.cygnus.com)
3538 * z8k-dis.c (unparse_instr): prettier tabs
3539 * z8kgen.c -> z8k-opc.h: bug fixes in tables
3541 Fri Sep 25 12:50:32 1992 Stu Grossman (grossman at cygnus.com)
3543 * configure.in: Add ncr* configuration.
3544 * z8k-dis.c (struct instr_data_s): Make instr_asmsrc char to make
3545 picayune ANSI compilers happy.
3547 Sep 20 08:50:55 1992 Fred Fish (fnf@cygnus.com)
3549 * configure.in (i386): Make i386 and i486 synonymous for now.
3550 * configure.in (i[34]86-*-sysv4): Add my_host definition.
3552 Fri Sep 18 17:01:23 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
3554 * Makefile.in (install): Fix typo.
3556 Fri Sep 18 02:04:24 1992 John Gilmore (gnu@cygnus.com)
3558 * Makefile.in (make): Remove obsolete crud.
3559 (sparc-opc.o): Avoid Sun Make VPATH bug.
3561 Tue Sep 8 17:29:27 1992 K. Richard Pixley (rich@sendai.cygnus.com)
3563 * Makefile.in: since there are no SUBDIRS, remove rule and
3564 references of subdir_do.
3566 Tue Sep 8 17:02:58 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
3568 * Makefile.in (install): Get the library name right here too.
3569 Don't install bfd.h, since it's unrelated to this library. No
3570 subdirs to recurse into, either.
3571 (CFILES): The source file has a .c suffix, not .o.
3573 * sparc-opc.c: New file, moved from BFD.
3574 * Makefile.in (OFILES): Build it.
3576 Thu Sep 3 16:59:20 1992 Michael Werner (mtw@cygnus.com)
3578 * z8k-dis.c: fixed forward refferences of some declarations.
3580 Mon Aug 31 16:09:45 1992 Michael Werner (mtw@cygnus.com)
3582 * Makefile.in: get the name of the library right
3584 Mon Aug 31 13:47:35 1992 Steve Chamberlain (sac@thepub.cygnus.com)
3586 * z8k-dis.c: knows how to disassemble z8k stuff
3587 * z8k-opc.h: new file full of z8000 opcodes
3591 version-control: never