1 Mon Oct 27 22:34:03 1997 Ken Raeburn <raeburn@cygnus.com>
3 * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
5 Added VR5400 instructions.
6 (N5): New cpu-id macro.
8 (WR_HILO, RD_HILO, MOD_HILO): New macros.
10 Mon Oct 27 22:34:03 1997 Ken Raeburn <raeburn@cygnus.com>
12 * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
13 (WR_HILO, RD_HILO, MOD_HILO): New macros.
15 Thu Oct 23 14:57:58 1997 Nick Clifton <nickc@cygnus.com>
17 * v850-dis.c (disassemble): Replace // with /* ... */
19 Wed Oct 22 17:33:21 1997 Richard Henderson <rth@cygnus.com>
21 * sparc-opc.c: Add wr & rd for v9a asr's.
22 * sparc-dis.c (print_insn_sparc): Recognize '_' and '/' for v9a asr's.
23 (v9a_asr_reg_names): New variable.
24 Patch from David Miller <davem@vger.rutgers.edu>.
26 Wed Oct 22 17:18:02 1997 Richard Henderson <rth@cygnus.com>
28 * sparc-opc.c (v9notv9a): New insn type.
29 (IMPDEP): Move to the end to not conflict with edge8 et al.
30 Patch from David Miller <davem@vger.rutgers.edu>.
32 Fri Oct 17 13:18:53 1997 Gavin Koch <gavin@cygnus.com>
34 * mips-opc.c (bnezl,beqzl): Mark these as also tx39.
36 Thu Oct 16 11:55:20 1997 Gavin Koch <gavin@cygnus.com>
38 * mips-opc.c: Note that 'jalx' is (probably incorrectly) marked I1.
40 Tue Oct 14 16:10:31 1997 Nick Clifton <nickc@cygnus.com>
42 * v850-dis.c (disassemble): Use new symbol_at_address_func() field
43 of disassemble_info structure to determine if an overlay address
44 has a matching symbol in low memory.
46 * dis-buf.c (generic_symbol_at_address): New (dummy) function for
47 new symbol_at_address_func field in disassemble_info structure.
49 Fri Oct 10 16:44:52 1997 Nick Clifton <nickc@cygnus.com>
51 * v850-opc.c (extract_d22): Use signed arithmatic.
53 Tue Oct 7 23:40:43 1997 Gavin Koch <gavin@cygnus.com>
55 * mips-opc.c: Three op mult is not an ISA insn.
57 Tue Oct 7 23:37:21 1997 Gavin Koch <gavin@cygnus.com>
59 * mips-opc.c: Fix formatting.
61 Fri Oct 3 17:26:54 1997 Ian Lance Taylor <ian@cygnus.com>
63 * i386-dis.c (OP_E): Explicitly sign extend 8 bit values, rather
64 than assuming that char is signed. Explicitly sign extend 16 bit
65 values, rather than assuming that short is 16 bits.
66 (OP_sI, OP_J, OP_DIR): Likewise.
69 Thu Oct 2 13:36:45 1997 Nick Clifton <nickc@cygnus.com>
71 * v850-dis.c (v850_sreg_names): Use symbolic names for higher
75 Wed Oct 1 16:58:54 1997 Nick Clifton <nickc@cygnus.com>
77 * v850-opc.c: Fix typo in comment.
79 * v850-dis.c (disassemble): Add test of processor type when
82 Wed Oct 1 14:10:20 1997 Ian Lance Taylor <ian@cygnus.com>
84 * configure.in: Use a diversion to set enable_shared before the
88 Thu Sep 25 13:04:59 1997 Ian Lance Taylor <ian@cygnus.com>
90 * m68k-opc.c (TBL1): Use ! rather than `.
91 * m68k-dis.c (print_insn_arg): Remove ` operand specifier.
93 Wed Sep 24 11:29:35 1997 Ian Lance Taylor <ian@cygnus.com>
95 * m68k-opc.c: Correct bchg, bclr, bset, and btst on ColdFire.
97 * m68k-opc.c: Accept tst{b,w,l} with immediate operands on cpu32.
99 * m68k-opc.c: Correct movew of an immediate operand to %sr or %ccr
102 * configure.in: Call AC_CHECK_TOOL before AM_PROG_LIBTOOL.
103 * aclocal.m4: Rebuild with new libtool.
104 * configure: Rebuild.
107 Fri Sep 19 11:45:49 1997 Andrew Cagney <cagney@b1.cygnus.com>
109 * v850-opc.c ("cmov"): Order reg param r1, r2 not r2, r2.
112 Thu Sep 18 11:21:43 1997 Doug Evans <dje@canuck.cygnus.com>
114 * sparc-opc.c (sparclet_cpreg_table): Add %ccsr2, %cccrr, %ccrstr.
116 Tue Sep 16 15:18:20 1997 Nick Clifton <nickc@cygnus.com>
118 * v850-opc.c (v850_opcodes): Further rearrangements.
121 Tue Sep 16 16:12:11 1997 Ken Raeburn <raeburn@cygnus.com>
123 * d30v-opc.c (rot2h, sra2h, srl2h insns): Revert last change.
126 Tue Sep 16 09:48:50 1997 Nick Clifton <nickc@cygnus.com>
128 * v850-opc.c (v850_opcodes): Fields reordered to allow assembler
131 Tue Sep 16 10:01:00 1997 Gavin Koch <gavin@cygnus.com>
133 * mips-opc.c: Added tx39 insns sdbbp, rfe, and deret.
135 * mips16-opc.c: Added mips16 sdbbp.
138 Mon Sep 15 18:31:52 1997 Nick Clifton <nickc@cygnus.com>
140 * v850-opc.c: Initialise processors field of v850_opcode structure.
143 Wed Aug 27 21:42:39 1997 Ken Raeburn <raeburn@cygnus.com>
145 Merge changes from Martin Hunt:
147 * d30v-opc.c: Change mvfacc to accept 6-bit unsigned values.
149 * d30v-opc.c (pre_defined_registers): Add control registers from 0-63.
150 (d30v_opcode_tabel): Add dbt, rtd, srah, and srlh instructions. Fix
151 rot2h, sra2h, and srl2h to use new SHORT_A5S format.
153 * d30v-dis.c (print_insn): Fix disassembly of SHORT_D2 opcodes.
155 * d30v-dis.c (print_insn): First operand of d*i (delayed
156 branch) instructions is relative.
158 * d30v-opc.c (d30v_opcode_table): Change form for repeati.
159 (d30v_operand_table): Add IMM6S3 type.
160 (d30v_format_table): Change SHORT_D2. Add LONG_Db.
162 * d30v-dis.c: Fix bug with ".s" and ".l" extensions
163 and cmp instructions.
165 * d30v-opc.c: Correct entries for repeat*, and sat*.
166 Make IMM5 unsigned. Create IMM6U and IMM12S3U operand
167 types. Correct several formats.
169 * d30v-opc.c: (pre_defined_registers): Add dpsw and dpc.
171 * d30v-opc.c (pre_defined_registers): Change control registers.
173 * d30v-opc.c (d30v_format_table): Correct SHORT_C1 and
174 SHORT_C2. Manual was incorrect.
176 * d30v-dis.c (lookup_opcode): Return value now indicates
177 if an opcode has a short and a long form. Used for deciding
178 to append a ".s" or ".l".
179 (print_insn): Append a ".s" to an instruction if it is
180 the short form and ".l" if it is a long form. Do not append
181 anything if the instruction has only one possible size.
183 * d30v-opc.c: Change mulx2h to require an even register.
184 New form: SHORT_A2; a SHORT_A form that needs an even
185 register as the first operand.
187 * d30v-dis.c (print_insn_d30v): Fix problem where the last
188 instruction was not being disassembled if there were an odd
189 number of instructions.
191 * d30v-opc.c (SHORT_M2, LONG_M2): Two new forms.
195 Fri Sep 12 11:43:54 1997 Nick Clifton <nickc@cygnus.com>
197 * v850-dis.c (disassemble): Improved display of register lists.
200 Thu Sep 11 17:35:10 1997 Doug Evans <dje@canuck.cygnus.com>
202 * sparc-opc.c (sparc_opcodes): Fix assembler args to
203 fzeros, fones, fsrc1, fsrc1s, fsrc2s, fnot1, fnot1s, fnot2s,
204 fors, fnors, fands, fnands, fxors, fxnors, fornot1s, fornot2s,
205 fandnot1s, fandnot2s.
207 Tue Sep 9 10:03:49 1997 Doug Evans <dje@canuck.cygnus.com>
209 * sparc-opc.c (sparc_opcodes): Fix op3 field for fcmpq/fcmpeq.
211 Mon Sep 8 14:06:59 1997 Doug Evans <dje@canuck.cygnus.com>
213 * cgen-asm.c (cgen_parse_address): New argument resultp.
215 * m32r-asm.c (parse_h_hi16): Right shift numbers by 16.
217 Tue Sep 2 18:39:08 1997 Jeffrey A Law (law@cygnus.com)
219 * mn10200-dis.c (disassemble): PC relative instructions are
220 relative to the next instruction, not the current instruction.
222 Tue Sep 2 15:41:55 1997 Nick Clifton <nickc@cygnus.com>
224 * v850-dis.c (disassemble): Only signed extend values that are not
225 returned by extract functions.
226 Remove use of V850_OPERAND_ADJUST_SHORT_MEMORY flag.
228 Tue Sep 2 15:39:40 1997 Nick Clifton <nickc@cygnus.com>
230 * v850-opc.c: Update comments. Remove use of
231 V850_OPERAND_ADJUST_SHORT_MEMORY. Fix several operand patterns.
233 Tue Aug 26 09:42:28 1997 Nick Clifton <nickc@cygnus.com>
235 * v850-opc.c (MOVHI): Immediate parameter is unsigned.
237 Mon Aug 25 15:58:07 1997 Christopher Provenzano <proven@cygnus.com>
239 * configure: Rebuilt with latest devo autoconf for NT support.
241 Fri Aug 22 10:35:15 1997 Nick Clifton <nickc@cygnus.com>
243 * v850-dis.c (disassemble): Use curly brace syntax for register
246 * v850-opc.c (v850_opcodes[]): Add NOT_R0 flag to decect cases
247 where r0 is being used as a destination register.
250 Thu Aug 21 11:09:09 1997 Nick Clifton <nickc@cygnus.com>
252 * v850-opc.c (v850_opcodes[]): Move divh opcodes next to each other.
256 Wed Aug 20 00:43:11 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
258 * sh-opc.h (sh_arg_type): Add A_SGR and A_DBR.
259 (sh_nibble_type, sh_arg_type): Add SH4 floating point extensions.
260 (sh_table): Likewise. Add movca.l, ocbi, ocbp, ocbwb.
261 Add insns to access SGR and DBR.
262 * sh-dis.c (print_insn_shx): Add SH4 floating point extensions.
265 Tue Aug 19 10:59:59 1997 Richard Henderson <rth@cygnus.com>
267 * alpha-opc.c (alpha_opcodes): Fix hw_rei_stall mungage.
270 Mon Aug 18 11:10:03 1997 Nick Clifton <nickc@cygnus.com>
272 * v850-opc.c (v850_opcodes[]): Remove use of flag field.
273 * v850-opc.c (v850_opcodes[]): Add support for reversed short load
276 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
278 * configure (cgen_files): Add support for v850e target.
279 * configure.in (cgen_files): Add support for v850e target.
281 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
283 * configure (cgen_files): Add support for v850eq target.
284 * configure.in (cgen_files): Add support for v850eq target.
287 Fri Aug 15 05:17:48 1997 Doug Evans <dje@canuck.cygnus.com>
289 * configure.in (bfd_arc_arch): Add.
290 * configure: Rebuild.
291 * Makefile.am (ALL_MACHINES): Add arc-dis.lo, arc-opc.lo.
292 * Makefile.in: Rebuild.
293 * arc-dis.c, arc-opc.c: New files.
294 * disassemble.c (ARCH_all): Define ARCH_arc.
295 (disassembler): Add ARC support.
297 Wed Aug 13 18:52:11 1997 Nick Clifton <nickc@cygnus.com>
300 * v850-dis.c (disassemble): Add support for v850EQ instructions.
302 * v850-opc.c (insert_i5div, extract_i5div): New Functions.
303 (v850_opcodes): Add v850EQ instructions.
305 * v850-dis.c (disassemble): Add support for v850E instructions.
307 * v850-opc.c (insert_d5_4, extract_d5_4, insert_d16_16,
308 extract_d16_16, insert_i9, extract_i9, insert_u9, extract_u9,
309 insert_spe, extract_spe): New Functions.
310 (v850_opcodes): Add v850E instructions.
313 * v850-opc.c: Reorganised and re-layed out to improve readability
316 Tue Aug 5 23:09:31 1997 Ian Lance Taylor <ian@cygnus.com>
318 * configure: Rebuild with autoconf 2.12.1.
320 Mon Aug 4 12:02:16 1997 Ian Lance Taylor <ian@cygnus.com>
322 * aclocal.m4, configure: Rebuild with new automake patches.
324 Fri Aug 1 13:02:04 1997 Ian Lance Taylor <ian@cygnus.com>
326 * configure.in: Set enable_shared before AM_PROG_LIBTOOL.
327 * acinclude.m4: Just include acinclude.m4 from BFD.
328 * aclocal.m4, configure: Rebuild.
330 Thu Jul 31 21:44:42 1997 Ian Lance Taylor <ian@cygnus.com>
332 * Makefile.am: New file, based on old Makefile.in.
333 * acconfig.h: New file.
334 * acinclude.m4: New file.
335 * stamp-h.in: New file.
336 * configure.in: Call AM_INIT_AUTOMAKE and AM_PROG_LIBTOOL.
337 Removed shared library handling; now handled by libtool. Replace
338 AC_CONFIG_HEADER with AM_CONFIG_HEADER. Call AM_MAINTAINER_MODE,
339 AM_CYGWIN32, and AM_EXEEXT. Replace AC_PROG_INSTALL with
340 AM_PROG_INSTALL. Change all .o files to .lo. Remove stamp-h
341 handling in AC_OUTPUT.
342 * dep-in.sed: Change .o to .lo.
343 * Makefile.in: Now built with automake.
344 * aclocal.m4: Now built with aclocal.
345 * config.in, configure: Rebuild.
347 Mon Jul 28 21:52:24 1997 Jeffrey A Law (law@cygnus.com)
349 * mips-opc.c: Fix typo/thinko in "eret" instruction.
352 Mon Jul 28 22:07:14 1997 Andrew Cagney <cagney@b1.cygnus.com>
354 * mips-opc.c: Fix coding of mtsa.
357 Thu Jul 24 13:03:26 1997 Doug Evans <dje@canuck.cygnus.com>
359 * sparc-opc.c (sparc_opcodes): Fix spelling on fpaddX, fpsubX insns.
361 * sparc-dis.c (sorted_opcodes): New static local.
362 (struct opcode_hash): `opcode' is pointer to const element.
363 (build_hash): First arg is now table of sorted pointers.
364 (print_insn_sparc): Sort opcodes by sorting table of pointers.
365 (compare_opcodes): Update.
367 Tue Jul 15 12:05:23 1997 Doug Evans <dje@canuck.cygnus.com>
369 * cgen-opc.c: #include <ctype.h>.
370 (hash_keyword_name): New arg `case_sensitive_p'. Callers updated.
371 Handle case insensitive hashing.
372 (hash_keyword_value): Change type of `value' to unsigned int.
374 Thu Jul 10 12:56:10 1997 Jeffrey A Law (law@cygnus.com)
376 * mips-opc.c (mips_builtin_opcodes): If an insn uses single
377 precision FP, mark it as such. Likewise for double precision
378 FP. Mark ISA1 insns. Consolidate duplicate opcodes where
381 (mips_builtin_opcodes): Remove non-existant r5900 instructions
385 Thu Jun 26 16:20:27 1997 Jeffrey A Law (law@cygnus.com)
387 * mips-opc.c (mips_builtin_opcodes): Add "pinteh", "pexeh" and
388 "pexew" as synonyms for "pintoh", "pexoh", "pexow".
391 Wed Jun 25 15:25:57 1997 Felix Lee <flee@cirdan.cygnus.com>
393 * ppc-opc.c (extract_nsi): make unsigned expression signed before
395 (UNUSED): remove one level of parens, so MSVC doesn't choke on
396 nesting depth when all the macros are expanded.
398 Tue Jun 17 17:02:17 1997 Ian Lance Taylor <ian@cygnus.com>
400 * sparc-opc.c: The fcmp v9a instructions take an integer register
401 as a destination, not a floating point register. From Christian
402 Kuehnke <Christian.Kuehnke@arbi.Informatik.Uni-Oldenburg.DE>.
404 Mon Jun 16 14:13:18 1997 Ian Lance Taylor <ian@cygnus.com>
406 * m68k-dis.c (print_insn_arg): Print case 7.2 using %pc@()
407 syntax. From Roman Hodek
408 <rnhodek@faui22c.informatik.uni-erlangen.de>.
410 * i386-dis.c (twobyte_has_modrm): Fix pand.
412 Mon Jun 16 14:08:38 1997 Michael Taylor <mbt@mit.edu>
414 * i386-dis.c (dis386_twobyte): Fix pand and pandn.
416 Tue Jun 10 11:26:47 1997 H.J. Lu <hjl@gnu.ai.mit.edu>
418 * arm-dis.c: Add prototypes for arm_decode_shift and
421 Mon Jun 2 11:39:04 1997 Gavin Koch <gavin@cygnus.com>
423 * mips-opc.c: Add r3900 insns.
425 Tue May 27 15:55:44 1997 Ian Lance Taylor <ian@cygnus.com>
427 * sh-dis.c (print_insn_shx): Change relmask to bfd_vma. Don't
428 print delay slot instructions on the same line. When using a PC
429 relative load, add a comment with the value being loaded if it can
432 Tue May 27 11:02:08 1997 Alan Modra <alan@spri.levels.unisa.edu.au>
434 * i386-dis.c (dis386[], dis386_twobyte[]): change pushl/popl
435 to pushS/popS for segment regs and byte constant so that
436 pushw/popw printed when in 16 bit data mode.
438 * i386-dis.c (dis386[]): change cwtl, cltd to cWtS, cStd to
439 print cbtw, cwtd in 16 bit data mode.
440 * i386-dis.c (putop): extra case W to support above.
442 * i386-dis.c (print_insn_x86): print addr32 prefix when given
443 address size prefix in 16 bit address mode.
445 Fri May 23 16:47:23 1997 Ian Lance Taylor <ian@cygnus.com>
447 * sh-dis.c: Reindent. Rename local variable fprintf to
450 Thu May 22 14:06:02 1997 Doug Evans <dje@canuck.cygnus.com>
452 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Undo patch of May 2.
454 Tue May 20 11:26:27 1997 Gavin Koch <gavin@cygnus.com>
456 * mips-opc.c (mips_builtin_opcodes): Moved INSN_ISA field into new
458 * mips16-opc.c (mip16_opcodes): same.
460 Mon May 12 15:10:53 1997 Jim Wilson <wilson@cygnus.com>
462 * m68k-opc.c (moveb): Change $d to %d.
464 Mon May 5 14:28:41 1997 Ian Lance Taylor <ian@cygnus.com>
466 * i386-dis.c: (dis386_twobyte): Add MMX instructions.
467 (twobyte_has_modrm): Likewise.
469 (OP_MMX, OP_EM, OP_MS): New static functions.
471 * i386-dis.c: Revert patch of April 4. The output now matches
474 Fri May 2 12:48:37 1997 Doug Evans <dje@canuck.cygnus.com>
476 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Use $uimm16 instead
479 Thu May 1 15:34:15 1997 Doug Evans <dje@canuck.cygnus.com>
481 * m32r-opc.h (CGEN_ARCH): Renamed from CGEN_CPU.
483 Tue Apr 15 12:40:08 1997 Ian Lance Taylor <ian@cygnus.com>
485 * Makefile.in (install): Depend upon installdirs.
486 (installdirs): New target.
488 Mon Apr 14 12:13:51 1997 Ian Lance Taylor <ian@cygnus.com>
490 From Thomas Graichen <graichen@rzpd.de>:
491 * configure.in: Use ${CONFIG_SHELL} when running $ac_config_sub.
492 * configure: Rebuild.
494 Sun Apr 13 17:50:41 1997 Doug Evans <dje@canuck.cygnus.com>
496 * cgen-*.c, m32r-*.c: #include sysdep.h instead of config.h.
497 Delete string{,s}.h support.
499 Thu Apr 10 14:44:56 1997 Doug Evans <dje@canuck.cygnus.com>
501 * cgen-asm.c (cgen_parse_operand_fn): New global.
502 (cgen_parse_{{,un}signed_integer,address}): Update call to
503 cgen_parse_operand_fn.
504 (cgen_init_parse_operand): New function.
505 * m32r-asm.c (parse_insn_normal): cgen_init_parse_operand renamed
506 from cgen_asm_init_parse.
507 (m32r_cgen_assemble_insn): New operand `errmsg'.
508 Delete call to as_bad, return error message to caller.
509 (m32r_cgen_asm_hash_keywords): #if 0 out.
511 Wed Apr 9 12:05:25 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
513 * m68k-dis.c (print_insn_arg) [case 'd']: Print as address register,
515 [case 'J']: Fix typo in register name.
517 Mon Apr 7 16:48:22 1997 Ian Lance Taylor <ian@cygnus.com>
519 * configure.in: Substitute SHLIB_LIBS.
520 * configure: Rebuild.
521 * Makefile.in (SHLIB_LIBS): New variable.
522 ($(SHLIB)): Use $(SHLIB_LIBS).
524 Mon Apr 7 11:45:44 1997 Doug Evans <dje@canuck.cygnus.com>
526 * cgen-dis.c (build_dis_hash_table): Fix xmalloc size computation.
528 * cgen-opc.c (hash_keyword_name): Improve algorithm.
530 * disassemble.c (disassembler): Handle m32r.
532 Fri Apr 4 12:29:38 1997 Doug Evans <dje@canuck.cygnus.com>
534 * m32r-asm.c, m32r-dis.c, m32r-opc.c, m32r-opc.h: New files.
535 * cgen-asm.c, cgen-dis.c, cgen-opc.c: New files.
536 * Makefile.in (CFILES): Add them.
537 (ALL_MACHINES): Add them.
538 (dependencies): Regenerate.
539 * configure.in (cgen_files): New variable.
540 (bfd_m32r_arch): Add entry.
541 * configure: Regenerate.
543 Fri Apr 4 14:04:16 1997 Ian Lance Taylor <ian@cygnus.com>
545 * configure.in: Correct file names for bfd_mn10[23]00_arch.
546 * configure: Rebuild.
548 * Makefile.in: Rebuild dependencies.
550 * d10v-dis.c: Include "ansidecl.h" before "opcode/d10v.h".
552 * i386-dis.c (float_reg): Swap fsubrp and fsubp. Swap fdivrp and
555 Thu Apr 3 13:22:45 1997 Ian Lance Taylor <ian@cygnus.com>
557 * Branched binutils 2.8.
559 Wed Apr 2 12:23:53 1997 Ian Lance Taylor <ian@cygnus.com>
561 * m10200-dis.c: Rename from mn10200-dis.c.
562 * m10200-opc.c: Rename from mn10200-opc.c.
563 * m10300-dis.c: Rename from mn10300-dis.c
564 * m10300-opc.c: Rename from mn10300-opc.c.
565 * Makefile.in: Update accordingly.
567 * mips16-opc.c: Add mul and dmul macros.
569 Tue Apr 1 16:27:45 1997 Klaus Kaempf <kkaempf@progis.de>
571 * makefile.vms: Update CFLAGS, add clean target.
573 Fri Mar 28 12:10:09 1997 Ian Lance Taylor <ian@cygnus.com>
575 * mips-opc.c: Add "wait". From Ralf Baechle
576 <ralf@gnu.ai.mit.edu>.
578 * configure.in: Add stdlib.h to AC_CHECK_HEADERS list.
579 * configure, config.in: Rebuild.
580 * sysdep.h: Include <stdlib.h> if it exists.
581 * sparc-dis.c: Include <stdio.h> and "sysdep.h". Don't include
583 * Makefile.in: Rebuild dependencies.
585 Thu Mar 27 14:24:43 1997 Ian Lance Taylor <ian@cygnus.com>
587 * ppc-opc.c: Add PPC 403 instructions and extended opcodes. From
588 Andrew Bray <andy@madhouse.demon.co.uk>.
590 * mips-opc.c: Add cast when setting mips_opcodes.
592 Tue Mar 25 23:04:00 1997 Stu Grossman (grossman@critters.cygnus.com)
594 * v850-dis.c (disassemble): Fix sign extension problem.
595 * v850-opc.c (extract_d*): Fix sign extension problems to make
596 disassembly calculate branch offsets correctly.
598 Mon Mar 24 13:22:13 1997 Ian Lance Taylor <ian@cygnus.com>
600 * sh-opc.h: Add bf/s and bt/s as synonyms for bf.s and bt.s.
602 * mips-opc.c: Add dctr and dctw.
605 Sun Mar 23 18:08:10 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
607 * d30v-dis.c (print_insn): Change the way signed constants
610 Fri Mar 21 14:37:52 1997 Ian Lance Taylor <ian@cygnus.com>
612 * Makefile.in (BFD_H): New variable.
613 (HFILES): New variable.
614 (CFILES): Add all C files.
615 (.dep, .dep1, dep.sed, dep, dep-in): New targets.
616 Delete old dependencies, and build new ones.
617 * dep-in.sed: New file.
619 Thu Mar 20 19:03:30 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
621 * m68k-opc.c (m68k_opcode_aliases): Added blo and blo{s,b,w,l}.
623 start-sanitize-coldfire
624 Wed Mar 19 06:53:58 1997 J.T. Conklin <jtc@rtl.cygnus.com>
626 * m68k-opc.c (m68k_opcodes): Provide coldfire division module
629 end-sanitize-coldfire
630 Tue Mar 18 14:17:03 1997 Jeffrey A Law (law@cygnus.com)
632 * mn10200-opc.c: Change "trap" to "syscall".
633 * mn10300-opc.c: Add new "syscall" instruction.
635 Mon Mar 17 08:48:03 1997 J.T. Conklin <jtc@beauty.cygnus.com>
637 * m68k-opc.c (m68k_opcodes): Provide correct entries for mulsl and
638 mulul insns on the coldfire.
640 Sat Mar 15 17:13:05 1997 Ian Lance Taylor <ian@cygnus.com>
642 * arm-dis.c (print_insn_arm): Don't print instruction bytes.
643 (print_insn_big_arm): Set bytes_per_chunk and display_endian.
644 (print_insn_little_arm): Likewise.
646 Fri Mar 14 15:08:59 1997 Ian Lance Taylor <ian@cygnus.com>
648 Based on patches from H.J. Lu <hjl@lucon.org>:
649 * i386-dis.c (fetch_data): Add prototype.
650 * m68k-dis.c (fetch_data): Add prototype.
651 (dummy_print_address): Add prototype. Make static.
652 * ppc-opc.c (valid_bo): Add prototype.
653 * sparc-dis.c (build_hash_table): Add prototype.
654 (is_delayed_branch, compute_arch_mask): Add prototypes.
655 (print_insn_sparc): Make several local variables const.
656 (compare_opcodes): Change arguments to const PTR. Add prototype.
657 * sparc-opc.c (arg): Change name field to be const.
658 (lookup_name, lookup_value): Add prototypes. Change table and
659 name parameters to be const.
660 (sparc_encode_asi): Change name parameter to be const.
661 (sparc_encode_membar, sparc_encode_prefetch): Likewise.
662 (sparc_encode_sparclet_cpreg): Likewise.
663 (sparc_decode_asi): Change return type to be const.
664 (sparc_decode_membar, sparc_decode_prefetch): Likewise.
665 (sparc_decode_sparclet_cpreg): Likewise.
667 Fri Mar 7 10:51:49 1997 Ian Lance Taylor <ian@cygnus.com>
669 * Makefile.in ($(SHLINK)): Just use ln -s, not ln -sf, since
670 Solaris doesn't like the combined options, and the -f is
672 (stamp-tshlink, install): Likewise.
674 Thu Mar 6 16:51:11 1997 Jeffrey A Law (law@cygnus.com)
676 * mn10300-opc.c (IMM16_PCREL, SD8N_PCREL, D16_SHIFT): Mark these
679 Tue Mar 4 06:10:36 1997 J.T. Conklin <jtc@cygnus.com>
681 * m68k-opc.c (m68k_opcodes): Fix last change for the mc68010.
683 Mon Mar 3 07:45:20 1997 J.T. Conklin <jtc@cygnus.com>
685 * m68k-opc.c (m68k_opcodes): Added entries for the tst insns on
688 Thu Feb 27 14:04:32 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
690 * m68k-opc.c (m68k_opcodes): Added swbegl pseudo-instruction.
693 Thu Feb 27 11:36:41 1997 Michael Meissner <meissner@cygnus.com>
695 * tic80-dis.c (print_insn_tic80): Set info->bytes_per_line to 8.
697 Wed Feb 26 15:34:48 1997 Michael Meissner <meissner@cygnus.com>
699 * tic80-opc.c (tic80_predefined_symbols): Define r25 properly.
702 Wed Feb 26 13:38:30 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
704 * m68k-dis.c (NEXTSINGLE, NEXTDOUBLE, NEXTEXTEND): Use
705 floatformat_to_double to make portable.
706 (print_insn_arg): Use NEXTEXTEND macro when extracting extended
709 Mon Feb 24 19:26:12 1997 Dawn Perchik <dawn@cygnus.com>
711 * mips-opc.c: Initialize mips_opcodes to mips_builtin_opcodes,
712 and bfd_mips_num_opcodes to bfd_mips_num_builtin_opcodes.
714 Mon Feb 24 15:19:01 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
716 * d10v-dis.c, d10v-opc.c: Change pre_defined_registers to
717 d10v_predefined_registers and reg_name_cnt to d10v_reg_name_cnt.
720 Mon Feb 24 14:33:26 1997 Fred Fish <fnf@cygnus.com>
722 * tic80-opc.c (LSI_SCALED): Renamed from this ...
723 (OFF_SL_BR_SCALED): ... to this, and added the flag
724 TIC80_OPERAND_BASEREL to the flags word.
725 (tic80_opcodes): Replace all occurances of LSI_SCALED with
729 Sat Feb 22 21:25:00 1997 Dawn Perchik <dawn@cygnus.com>
731 * mips-opc.c: Add macros for cop0, cop1 cop2 and cop3.
732 Change mips_opcodes from const array to a pointer,
733 and change bfd_mips_num_opcodes from const int to int,
734 so that we can increase the size of the mips opcodes table
738 Sat Feb 22 21:03:47 1997 Fred Fish <fnf@cygnus.com>
740 * tic80-opc.c (tic80_predefined_symbols): Revert change to
741 store BITNUM values in the table in one's complement form
742 to match behavior when assembler is given a raw numeric
743 value for a BITNUM operand.
744 * tic80-dis.c (print_operand_bitnum): Ditto.
748 Fri Feb 21 16:31:18 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
750 * d30v-opc.c: Removed references to FLAG_X.
753 Wed Feb 19 14:51:20 1997 Ian Lance Taylor <ian@cygnus.com>
755 * Makefile.in: Add dependencies on ../bfd/bfd.h as required.
758 Tue Feb 18 17:43:43 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
760 * Makefile.in: Added d30v object files.
761 * configure: (bfd_d30v_arch) Rebuilt.
762 * configure.in: (bfd_d30v_arch) Added new case.
763 * d30v-dis.c: New file.
764 * d30v-opc.c: New file.
765 * disassemble.c (disassembler) Add entry for d30v.
769 Tue Feb 18 16:32:08 1997 Fred Fish <fnf@cygnus.com>
771 * tic80-opc.c (tic80_predefined_symbols): Add symbolic
772 representations for the floating point BITNUM values.
774 Fri Feb 14 12:14:05 1997 Fred Fish <fnf@cygnus.com>
776 * tic80-opc.c (tic80_predefined_symbols): Store BITNUM values
777 in the table in one's complement form, as they appear in the
779 (tic80_symbol_to_value): Use macros to access predefined
781 (tic80_value_to_symbol): Ditto.
782 (tic80_next_predefined_symbol): New function.
783 * tic80-dis.c (print_operand_bitnum): Remove code that did
784 one's complement for BITNUM values.
788 Fri Feb 14 13:56:51 1997 Gavin Koch <gavin@cygnus.com>
790 * mips-opc.c: bug fix, can't mark insns INSN_5900 and INSN_ISA4
793 Thu Feb 13 21:56:51 1997 Klaus Kaempf <kkaempf@progis.de>
795 * makefile.vms: Remove 8 bit characters. Update to latest
798 Thu Feb 13 20:41:22 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
800 * m68k-opc.c (m68k_opcodes): Add swbeg pseudo-instruction.
802 Thu Feb 13 16:30:02 1997 Jeffrey A Law (law@cygnus.com)
804 * mn10200-opc.c (IMM16_PCREL): This is a signed operand.
805 (IMM24_PCREL): Likewise.
807 Thu Feb 13 13:28:43 1997 Ian Lance Taylor <ian@cygnus.com>
809 * mips-dis.c (print_mips16_insn_arg): Use memaddr - 2 as the base
810 address for an extended PC relative instruction that is not a
813 Wed Feb 12 12:27:40 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
815 * m68k-dis.c (print_insn_m68k): Set bytes_per_chunk and
819 Tue Feb 11 16:36:31 1997 Fred Fish <fnf@cygnus.com>
821 * tic80-opc.c (tic80_operands): Fix typo '+' -> '|'.
822 (tic80_opcodes): Sort entries so that long immediate forms
823 come after short immediate forms, making it easier for
824 assembler to select the right one for a given operand.
827 Tue Feb 11 15:26:47 1997 Ian Lance Taylor <ian@cygnus.com>
829 * mips-dis.c (_print_insn_mips): Set bytes_per_chunk and
831 (print_insn_mips16): Likewise.
834 Fri Feb 7 11:12:44 1997 Gavin Koch <gavin@cygnus.com>
836 * mips-opc.c: add r5900.
840 Mon Feb 10 10:12:41 1997 Fred Fish <fnf@cygnus.com>
842 * tic80-opc.c (tic80_symbol_to_value): Changed to accept
843 a symbol class that restricts translation to just that
844 class (general register, condition code, etc).
846 Thu Feb 6 17:34:09 1997 Fred Fish <fnf@cygnus.com>
848 * tic80-opc.c (tic80_operands): Add REG_0_E, REG_22_E,
849 and REG_DEST_E for register operands that have to be
850 an even numbered register. Add REG_FPA for operands that
851 are one of the floating point accumulator registers.
852 Add TIC80_OPERAND_MASK to flags for ENDMASK operand.
853 (tic80_opcodes): Change entries that need even numbered
854 register operands to use the new operand table entries.
855 Add "or" entries that are identical to "or.tt" entries.
858 Wed Feb 5 11:12:44 1997 Ian Lance Taylor <ian@cygnus.com>
860 * mips16-opc.c: Add new cases of exit instruction for
862 * mips-dis.c (print_mips16_insn_arg): Display floating point
863 registers in operands of exit instruction. Print `$' before
864 register names in operands of entry and exit instructions.
867 Thu Jan 30 14:09:03 1997 Fred Fish <fnf@cygnus.com>
869 * tic80-opc.c (tic80_predefined_symbols): Table of name/value
870 pairs for all predefined symbols recognized by the assembler.
871 Also used by the disassembling routines.
872 (tic80_symbol_to_value): New function.
873 (tic80_value_to_symbol): New function.
874 * tic80-dis.c (print_operand_control_register,
875 print_operand_condition_code, print_operand_bitnum):
876 Remove private tables and use tic80_value_to_symbol function.
879 Thu Jan 30 11:30:45 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
881 * d10v-dis.c (print_operand): Change address printing
882 to correctly handle PC wrapping. Fixes PR11490.
884 Wed Jan 29 09:39:17 1997 Jeffrey A Law (law@cygnus.com)
886 * mn10200-opc.c (mn10200_operands): Make 8 and 16 bit pc-relative
889 Tue Jan 28 15:57:34 1997 Ian Lance Taylor <ian@cygnus.com>
891 * mips-dis.c (print_insn_mips16): Set insn_info information.
892 (print_mips16_insn_arg): Likewise.
894 * mips-dis.c (print_insn_mips16): Better handling of an extend
895 opcode followed by an instruction which can not be extended.
897 Fri Jan 24 12:08:21 1997 J.T. Conklin <jtc@cygnus.com>
899 * m68k-opc.c (m68k_opcodes): Changed operand specifier for the
900 coldfire moveb instruction to not allow an address register as
901 destination. Although the documentation does not indicate that
902 this is invalid, experiments uncovered unexpected behavior.
903 Added a comment explaining the situation. Thanks to Andreas
904 Schwab for pointing this out to me.
907 Wed Jan 22 20:13:51 1997 Fred Fish <fnf@cygnus.com>
909 * tic80-opc.c (tic80_opcodes): Expand comment to note that the
910 entries are presorted so that entries with the same mnemonic are
911 adjacent to each other in the table. Sort the entries for each
912 instruction so that this is true.
915 Mon Jan 20 12:48:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
917 * m68k-dis.c: Include <libiberty.h>.
918 (print_insn_m68k): Sort the opcode table on the most significant
919 nibble of the opcode.
922 Sat Jan 18 15:15:05 1997 Fred Fish <fnf@cygnus.com>
924 * tic80-dis.c (tic80_opcodes): Add "wrcr", "vmpy", "vrnd",
925 "vsub", "vst", "xnor", and "xor" instructions.
926 (V_a1): Renamed from V_a, msb of accumulator reg number.
927 (V_a0): Add macro, lsb of accumulator reg number.
929 Fri Jan 17 18:24:31 1997 Fred Fish <fnf@cygnus.com>
931 * tic80-dis.c (print_insn_tic80): Broke excessively long
932 function up into several smaller ones and arranged for
933 the instruction printing function to be callable recursively
934 to print vector instructions that have both a load and a
935 math instruction packed into a single opcode.
936 * tic80-opc.c (tic80_opcodes): Expand comment for vld opcode
937 to explain why it comes after the other vector opcodes.
940 Fri Jan 17 16:19:15 1997 J.T. Conklin <jtc@beauty.cygnus.com>
942 * m68k-opc.c (m68k_opcodes): add b, w, or l specifier to coldfire
943 move insns to handle immediate operands.
945 Thu Jan 17 16:19:00 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
947 * m68k-opc.c (m68k_opcodes): Delete duplicate entry for "cmpil".
948 fix operand mask in the "moveml" entries for the coldfire.
951 Thu Jan 16 20:54:40 1997 Fred Fish <fnf@cygnus.com>
953 * tic80-opc.c (V_a, V_m, V_S, V_Z, V_p, OP_V, MASK_V):
954 New macros for building vector instruction opcodes.
955 (tic80_opcodes): Remove all uses of FMT_SI, FMT_REG, and
956 FMT_LI, which were unused. The field is now a flags field.
957 Remove some opcodes that are possible, but illegal, such
958 as long immediate instructions with doubles for immediate
959 values. Add "vadd" and "vld" instructions.
961 Wed Jan 15 18:59:51 1997 Fred Fish <fnf@cygnus.com>
963 * tic80-opc.c (tic80_operands): Reorder some table entries to make
964 the order more logical. Move the shift alias instructions ("rotl",
965 "shl", "ins", "rotr", "extu", "exts", "srl", and "sra" to be
966 interspersed with the regular sr.x and sl.x instructions. Add
967 and test new instruction opcodes for "sl", "sli", "sr", "sri", "st",
968 "sub", "subu", "swcr", and "trap".
970 Tue Jan 14 19:42:50 1997 Fred Fish <fnf@cygnus.com>
972 * tic80-opc.c (OFF_SS_PC): Renamed from OFF_SS.
973 (OFF_SL_PC): Renamed from OFF_SL.
974 (OFF_SS_BR): New operand type for base relative operand.
975 (OFF_SL_BR): New operand type for base relative operand.
976 (REG_BASE): New operand type for base register operand.
977 (tic80_opcodes): Add and test "fmpy", "frndm", "frndn", "frndp",
978 "frndz", "fsqrt", "fsub", "illop0", "illopF", "ins", "jsr",
979 "ld", "ld.u", "lmo", "or", "rdcr", "rmo", "rotl", and "rotr"
981 * tic80-dis.c (print_insn_tic80): Print opcode name with fixed width
982 10 char field, padded with spaces on rhs, rather than a string
983 followed by a tab. Use renamed TIC80_OPERAND_PCREL flag bit rather
984 than old TIC80_OPERAND_RELATIVE. Add support for new
985 TIC80_OPERAND_BASEREL flag bit.
987 Mon Jan 13 15:58:56 1997 Fred Fish <fnf@cygnus.com>
989 * tic80-dis.c (print_insn_tic80): Print floating point operands
991 * tic80-opc.c (SPFI): Add single precision floating point
992 immediate operand type.
993 (ROTATE): Add rotate operand type for shifts.
994 (ENDMASK): Add for shifts.
995 (n): Macro for the 'n' bit.
996 (i): Macro for the 'i' bit.
997 (PD): Macro for the 'PD' field.
998 (P2): Macro for the 'P2' field.
999 (P1): Macro for the 'P1' field.
1000 (tic80_opcodes): Add entries for "exts", "extu", "fadd",
1004 Mon Jan 6 15:06:55 1997 Jeffrey A Law (law@cygnus.com)
1006 * mn10200-dis.c (disassemble): Mask off unwanted bits after
1007 adding in current address for pc-relative operands.
1009 start-sanitize-tic80
1010 Mon Jan 6 10:56:25 1997 Fred Fish <fnf@cygnus.com>
1012 * tic80-dis.c (R_SCALED): Add macro to test for ":s" modifier bit.
1013 (print_insn_tic80): If R_SCALED then print ":s" modifier for operand.
1014 * tic80-opc.c (REG0, REG22, REG27, SSOFF, LSOFF): Names
1015 changed to REG_0, REG_22, REG_DEST, OFF_SS, OFF_SL respectively.
1016 (SICR, LICR, REGM_SI, REGM_LI): Names changed to CR_SI, CR_LI,
1017 REG_BASE_M_SI, REG_BASE_M_LI respectively.
1018 (REG_SCALED, LSI_SCALED): New operand types.
1019 (E): New macro for 'E' bit at bit 27.
1020 (tic80_opcodes): Add and test dld, dld.u, dst, estop, and etrap
1021 opcodes, including the various size flavors (b,h,w,d) for
1022 the direct load and store instructions.
1024 Sun Jan 5 12:18:14 1997 Fred Fish <fnf@cygnus.com>
1026 * tic80-dis.c (M_SI, M_LI): Add macros to test for ":m" modifier bit
1028 * tic80-dis.c (print_insn_tic80): Change comma and paren handling.
1029 Use M_SI and M_LI macros to check for ":m" modifier for GPR operands.
1030 * tic80-opc.c (tic80_operands): Add REGM_SI and REGM_LI operands.
1031 (F, M_REG, M_LI, M_SI, SZ_REG, SZ_LI, SZ_SI, D, S): New bit-twiddlers.
1032 (MASK_LI_M, MASK_SI_M, MASK_REG_M): Remove and replace in opcode
1033 masks with "MASK_* & ~M_*" to get the M bit reset.
1034 (tic80_opcodes): Add bsr, bsr.a, cmnd, cmp, dcachec, and dcachef.
1036 Sat Jan 4 19:05:05 1997 Fred Fish <fnf@cygnus.com>
1038 * tic80-dis.c (print_insn_tic80): Print TIC80_OPERAND_RELATIVE
1039 correctly. Add support for printing TIC80_OPERAND_BITNUM and
1040 TIC80_OPERAND_CC, and TIC80_OPERAND_CR operands in symbolic
1042 * tic80-opc.c (tic80_operands): Add SSOFF, LSOFF, BITNUM,
1043 CC, SICR, and LICR table entries.
1044 (tic80_opcodes): Add and test "nop", "br", "bbo", "bbz",
1045 "bcnd", and "brcr" opcodes.
1048 Fri Jan 3 18:32:11 1997 Fred Fish <fnf@cygnus.com>
1050 * ppc-opc.c (powerpc_operands): Make comment match the
1051 actual fields (no shift field).
1052 * sparc-opc.c (sparc_opcodes): Document why this cannot be "const".
1053 start-sanitize-tic80
1054 * tic80-dis.c (print_insn_tic80): Replace abort stub with a
1055 partial implementation, work in progress.
1056 * tic80-opc.c (tic80_operands): Begin construction operands table.
1057 (tic80_opcodes): Continue populating opcodes table and start
1058 filling in the operand indices.
1059 (tic80_num_opcodes): Add this.
1062 Fri Jan 3 12:13:52 1997 Ian Lance Taylor <ian@cygnus.com>
1064 * m68k-opc.c: Add #B case for moveq.
1066 Thu Jan 2 12:14:29 1997 Jeffrey A Law (law@cygnus.com)
1068 * mn10300-dis.c (disassemble): Make sure all variables are initialized
1069 before they are used.
1071 Tue Dec 31 12:20:38 1996 Jeffrey A Law (law@cygnus.com)
1073 * v850-opc.c (v850_opcodes): Put curly-braces around operands
1074 for "breakpoint" instruction.
1076 Tue Dec 31 15:38:13 1996 Ian Lance Taylor <ian@cygnus.com>
1078 * Makefile.in (ALL_CFLAGS): Add -D_GNU_SOURCE.
1079 (dep): Use ALL_CFLAGS rather than CFLAGS.
1081 Tue Dec 31 15:09:16 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1083 * v850-opc.c (D8_{6,7}): Set V850_OPERAND_ADJUST_SHORT_MEMORY
1086 Mon Dec 30 17:02:11 1996 Fred Fish <fnf@cygnus.com>
1088 * Makefile.in (m68k-opc.o, alpha-opc.o): Remove dis-asm.h dependency.
1089 start-sanitize-tic80
1090 (tic80-dis.o, tic80-opc.o): Add rules per comment in Makefile.in.
1093 Mon Dec 30 11:38:01 1996 Ian Lance Taylor <ian@cygnus.com>
1095 * mips16-opc.c: Add "abs".
1097 start-sanitize-tic80
1098 Sun Dec 29 10:58:22 1996 Fred Fish <fnf@cygnus.com>
1100 * Makefile.in (ALL_MACHINES): Add tic80-dis.o and tic80-opc.o.
1101 * disassemble.c (ARCH_tic80): Define if ARCH_all is defined.
1102 (disassembler): Add bfd_arch_tic80 support to set disassemble
1103 to print_insn_tic80.
1104 * tic80-dis.c (print_insn_tic80): Add stub.
1106 Fri Dec 27 22:30:57 1996 Fred Fish <fnf@cygnus.com>
1108 * configure.in (arch in $selarchs): Add bfd_tic80_arch entry.
1109 * configure: Regenerate with autoconf.
1110 * tic80-dis.c: Add file.
1111 * tic80-opc.c: Add file.
1114 Fri Dec 20 14:30:19 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1116 * d10v-opc.c (pre_defined_registers): Add cr[0-15], dpc, dpsw, link.
1118 Mon Dec 16 13:00:15 1996 Jeffrey A Law (law@cygnus.com)
1120 * mn10200-opc.c (mn10200_operands): Add SIMM16N.
1121 (mn10200_opcodes): Use it for some logicals and btst insns.
1122 Add "break" and "trap" instructions.
1124 * mn10300-opc.c (mn10300_opcodes): Add "break" instruction.
1126 * mn10200-opc.c: Add pseudo-ops for "mov (an),am" and "mov an,(am)".
1128 Sat Dec 14 22:36:20 1996 Ian Lance Taylor <ian@cygnus.com>
1130 * mips-dis.c (print_mips16_insn_arg): The base address of a PC
1131 relative load or add now depends upon whether the instruction is
1134 Wed Dec 11 09:23:46 1996 Jeffrey A Law (law@cygnus.com)
1136 * mn10200-dis.c: Finish writing disassembler.
1137 * mn10200-opc.c (mn10200_opcodes): Fix mask for "mov imm8,dn".
1138 Fix mask for "jmp (an)".
1140 * mn10300-dis.c (disassemble, print_insn_mn10300): Corrently
1141 handle endianness issues for mn10300.
1143 * mn10200-opc.c (mn10200_opcodes): Fix operands for "movb dm,(an)".
1145 Tue Dec 10 12:08:05 1996 Jeffrey A Law (law@cygnus.com)
1147 * mn10200-opc.c (mn10200_opcodes): "mov imm8,d0" is a format 2
1148 instruction. Fix opcode field for "movb (imm24),dn".
1150 * mn10200-opc.c (mn10200_operands): Fix insertion position
1153 Mon Dec 9 16:42:43 1996 Jeffrey A Law (law@cygnus.com)
1155 * mn10200-opc.c: Create mn10200 opcode table.
1156 * mn10200-dis.c: Flesh out mn10200 disassembler. Not ready,
1157 but moving along nicely.
1159 Sun Dec 8 04:28:31 1996 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1161 * Makefile.in (ALL_MACHINES): Add mips16-opc.o.
1163 Fri Dec 6 16:47:40 1996 J.T. Conklin <jtc@rhino.cygnus.com>
1165 * m68k-opc.c (m68k_opcodes): Revert change to use < and >
1166 specifiers for fmovem* instructions.
1168 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
1170 * mn10300-dis.c (disassemble): Remove '$' register prefixing.
1172 Fri Dec 6 17:34:39 1996 Ian Lance Taylor <ian@cygnus.com>
1174 * mips16-opc.c: Change opcode for entry/exit to avoid conflicting
1177 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
1179 * mn10300-opc.c: Add some comments explaining the various
1182 * mn10300-dis.c (disassemble): Fix minor gcc -Wall warnings.
1184 Thu Dec 5 12:09:48 1996 J.T. Conklin <jtc@rtl.cygnus.com>
1186 * m68k-dis.c (print_insn_arg): Handle new < and > operand
1189 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
1190 operand specifiers in fmovm* instructions.
1192 Wed Dec 4 14:52:18 1996 Ian Lance Taylor <ian@cygnus.com>
1194 * ppc-opc.c (insert_li): Give an error if the offset has the two
1195 least significant bits set.
1197 Wed Nov 27 13:09:01 1996 Ian Lance Taylor <ian@cygnus.com>
1199 * mips-dis.c (print_insn_mips16): Separate the instruction from
1200 the arguments with a tab, not a space.
1202 Tue Nov 26 13:24:17 1996 Jeffrey A Law (law@cygnus.com)
1204 * mn10300-dis.c (disasemble): Finish conversion to '$' as
1207 * mn10300-opc.c (mn10300_opcodes): Fix mask field for
1210 Tue Nov 26 10:53:21 1996 Ian Lance Taylor <ian@cygnus.com>
1212 * configure: Rebuild with autoconf 2.12.
1214 Add support for mips16 (16 bit MIPS implementation):
1215 * mips16-opc.c: New file.
1216 * mips-dis.c: Include "elf-bfd.h" and "elf/mips.h".
1217 (mips16_reg_names): New static array.
1218 (print_insn_big_mips): Use print_insn_mips16 in 16 bit mode or
1219 after seeing a 16 bit symbol.
1220 (print_insn_little_mips): Likewise.
1221 (print_insn_mips16): New static function.
1222 (print_mips16_insn_arg): New static function.
1223 * mips-opc.c: Add jalx instruction.
1224 * Makefile.in (mips16-opc.o): New target.
1225 * configure.in: Use mips16-opc.o for bfd_mips_arch.
1226 * configure: Rebuild.
1228 Mon Nov 25 16:15:17 1996 J.T. Conklin <jtc@cygnus.com>
1230 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
1231 operand specifiers in *save, *restore and movem* instructions.
1233 * m68k-opc.c (m68k_opcodes): Fix move and movem instructions for
1236 * m68k-opc.c (m68k_opcodes): The coldfire (mcf5200) can only use
1237 register operands for immediate arithmetic, not, neg, negx, and
1238 set according to condition instructions.
1240 * m68k-opc.c (m68k_opcodes): Consistantly Use "s" as the storage
1241 specifier of the effective-address operand in immediate forms of
1242 arithmetic instructions. The specifier for the immediate operand
1243 notes how and where the constant will be stored.
1245 Mon Nov 25 11:17:01 1996 Jeffrey A Law (law@cygnus.com)
1247 * mn10300-opc.c (mn10300_opcodes): Remove redundant "lcc"
1250 * mn10300-dis.c (disassemble): Use '$' instead of '%' for
1253 * mn10300-dis.c (disassemble): Prefix registers with '%'.
1255 Wed Nov 20 10:37:13 1996 Jeffrey A Law (law@cygnus.com)
1257 * mn10300-dis.c (disassemble): Handle register lists.
1259 * mn10300-opc.c: Fix handling of register list operand for
1260 "call", "ret", and "rets" instructions.
1262 * mn10300-dis.c (disassemble): Print PC-relative and memory
1263 addresses symbolically if possible.
1264 * mn10300-opc.c: Distinguish between absolute memory addresses,
1265 pc-relative offsets & random immediates.
1267 * mn10300-dis.c (print_insn_mn10300): Fix fetch of last byte
1269 (disassemble): Handle SPLIT and EXTENDED operands.
1271 Tue Nov 19 13:33:01 1996 Jeffrey A Law (law@cygnus.com)
1273 * mn10300-dis.c: Rough cut at printing some operands.
1275 * mn10300-dis.c: Start working on disassembler support.
1276 * mn10300-opc.c (mn10300_opcodes): Fix masks on several insns.
1278 * mn10300-opc.c (mn10300_operands): Add "REGS" for a register
1280 (mn10300_opcodes): Use REGS for register list in "movm" instructions.
1282 Mon Nov 18 15:20:35 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1284 * d10v-opc.c (d10v_opcodes): Add3 sets the carry.
1286 Fri Nov 15 13:43:19 1996 Jeffrey A Law (law@cygnus.com)
1288 * mn10300-opc.c (mn10300_opcodes): Demand parens around
1289 register argument is calls and jmp instructions.
1291 Thu Nov 7 00:26:05 1996 Jeffrey A Law (law@cygnus.com)
1293 * mn10300-opc.c (mn10300_opcodes): Use DN01 for putx and
1294 getx operand. Fix opcode for mulqu imm,dn.
1296 Wed Nov 6 13:42:32 1996 Jeffrey A Law (law@cygnus.com)
1298 * mn10300-opc.c (mn10300_operands): Hijack "bits" field
1299 in MN10300_OPERAND_SPLIT operands for how many bits
1300 appear in the basic insn word. Add IMM32_HIGH24,
1301 IMM32_HIGH24_LOWSHIFT8, IMM8E_SHIFT8.
1302 (mn10300_opcodes): Use new operands as needed.
1304 * mn10300-opc.c (mn10300_operands): Add IMM32_LOWSHIFT8
1305 for bset, bclr, btst instructions.
1306 (mn10300_opcodes): Use new IMM32_LOWSHIFT8 as needed.
1308 * mn10300-opc.c (mn10300_operands): Remove many redundant
1309 operands. Update opcode table as appropriate.
1310 (IMM32): Add MN10300_OPERAND_SPLIT flag.
1311 (mn10300_opcodes): Fix single bit error in mov imm32,dn insn.
1313 Tue Nov 5 13:26:58 1996 Jeffrey A Law (law@cygnus.com)
1315 * mn10300-opc.c (mn10300_operands): Add DN2, DM2, AN2, AM2
1316 operands (for indexed load/stores). Fix bitpos for DI
1317 operand. Add SN8N_SHIFT8, IMM8_SHIFT8, and D16_SHIFT for the
1318 few instructions that insert immediates/displacements in the
1319 middle of the instruction. Add IMM8E for 8 bit immediate in
1320 the extended part of an instruction.
1321 (mn10300_operands): Use new opcodes as appropriate.
1323 Tue Nov 5 10:30:51 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1325 * d10v-opc.c (d10v_opcodes): Declare the trap instruction
1326 sequential so the assembler never parallelizes it with
1329 Mon Nov 4 12:50:40 1996 Jeffrey A Law (law@cygnus.com)
1331 * mn10300-opc.c (mn10300_operands): Add DN01 and AN01 for
1332 a data/address register that appears in register field 0
1333 and register field 1.
1334 (mn10300_opcodes): Use DN01 and AN01 for mov/cmp imm8,DN/AN
1336 Fri Nov 1 10:29:11 1996 Richard Henderson <rth@tamu.edu>
1338 * alpha-dis.c (print_insn_alpha): Use new NOPAL mask for
1339 standard disassembly.
1341 * alpha-opc.c (alpha_operands): Rearrange flags slot.
1342 (alpha_opcodes): Add new BWX, CIX, and MAX instructions.
1343 Recategorize PALcode instructions.
1345 Wed Oct 30 16:46:58 1996 Jeffrey A Law (law@cygnus.com)
1347 * v850-opc.c (v850_opcodes): Add relaxing "jbr".
1349 Tue Oct 29 16:30:28 1996 Ian Lance Taylor <ian@cygnus.com>
1351 * mips-dis.c (_print_insn_mips): Don't print a trailing tab if
1352 there are no operand types.
1354 Tue Oct 29 12:22:21 1996 Jeffrey A Law (law@cygnus.com)
1356 * v850-opc.c (D9_RELAX): Renamed from D9, all references
1358 (v850_operands): Make sure D22 immediately follows D9_RELAX.
1360 Fri Oct 25 12:12:53 1996 Ian Lance Taylor <ian@cygnus.com>
1362 * i386-dis.c (print_insn_x86): Set info->bytes_per_line to 5.
1364 Thu Oct 24 17:53:52 1996 Jeffrey A Law (law@cygnus.com)
1366 * v850-opc.c (insert_d8_6): Fix operand insertion for sld.w
1367 and sst.w instructions.
1369 * v850-opc.c (v850_opcodes): Add "jCC" instructions (aliases for
1372 Thu Oct 24 17:21:20 1996 Ian Lance Taylor <ian@cygnus.com>
1374 * mips-dis.c (_print_insn_mips): Use a tab between the instruction
1377 Tue Oct 22 23:32:56 1996 Ian Lance Taylor <ian@cygnus.com>
1379 * ppc-opc.c (PPCPWR2): Define.
1380 (powerpc_opcodes): Use PPCPWR2 for fsqrt, rather than duplicating
1383 Fri Oct 11 16:03:49 1996 Jeffrey A Law (law@cygnus.com)
1385 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode
1386 field for movhu instruction.
1388 * v850-dis.c (disassemble): For V850_OPERAND_SIGNED operands,
1389 cast value to "long" not "signed long" to keep hpux10
1392 Thu Oct 10 10:25:58 1996 Jeffrey A Law (law@cygnus.com)
1394 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode field
1397 * mn10300-opc.c (FMT*): Remove definitions.
1399 * mn10300-opc.c (mn10300_opcodes): Fix destination register
1400 for shift-by-register opcodes.
1402 * mn10300-opc.c (mn10300_operands): Break DN, DM, AN, AM
1403 into [AD][MN][01] for encoding the position of the register
1406 Wed Oct 9 11:19:26 1996 Jeffrey A Law (law@cygnus.com)
1408 * mn10300-opc.c (mn10300_opcodes): Add "extended" instructions,
1409 "putx", "getx", "mulq", "mulqu", "sat16", "sat24", "bsch".
1411 Tue Oct 8 11:55:35 1996 Jeffrey A Law (law@cygnus.com)
1413 * mn10300-opc.c (mn10300_operands): Remove "REGS" operand.
1414 Fix various typos. Add "PAREN" operand.
1415 (MEM, MEM2): Define.
1416 (mn10300_opcodes): Surround all memory addresses with "PAREN"
1417 operands. Fix several typos.
1419 * mn10300-opc.c (mn10300_opcodes): Fix typos in yesterday's
1422 Mon Oct 7 16:48:45 1996 Jeffrey A Law (law@cygnus.com)
1424 * mn10300-opc.c (FMT_XX): Renumber starting at one.
1425 (mn10300_operands): Rough cut. Enough to parse "mov" instructions
1427 (mn10300_opcodes): Break opcode format out into its own field.
1428 Update many operand fields to deal with signed vs unsigned
1429 issues. Fix one or two typos in the "mov" instruction
1430 opcode, mask and/or operand fields.
1432 Mon Oct 7 11:39:49 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1434 * m68k-opc.c (plusha): Prefer encoding for m68040up, in case
1435 m68851 wasn't reset.
1437 Thu Oct 3 17:17:02 1996 Ian Lance Taylor <ian@cygnus.com>
1439 * mn10300-opc.c (mn10300_opcodes): Add opcode & masks for
1440 all opcodes. Very rough cut at operands for all opcodes.
1442 * mn10300-opc.c (mn10300_opcodes): Start fleshing out the
1445 Thu Oct 3 10:06:07 1996 Jeffrey A Law (law@cygnus.com)
1447 * mn10200-opc.c, mn10300-opc.c: New files.
1448 * mn10200-dis.c, mn10300-dis.c: New files.
1449 * mn10x00-opc.c, mn10x00-dis.c: Deleted.
1450 * disassemble.c: Break mn10x00 support into 10200 and 10300
1452 * configure.in: Likewise.
1453 * configure: Rebuilt.
1455 Thu Oct 3 15:59:12 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
1457 * Makefile.in (MOSTLYCLEAN): Move config.log to distclean.
1459 Wed Oct 2 23:28:42 1996 Jeffrey A Law (law@cygnus.com)
1461 * mn10x00-opc.c, mn10x00-dis.c: New files for Matsushita
1463 * disassemble (ARCH_mn10x00): Define.
1464 (disassembler): Handle bfd_arch_mn10x00.
1465 * configure.in: Recognize bfd_mn10x00_arch.
1466 * configure: Rebuilt.
1468 Tue Oct 1 10:49:11 1996 Ian Lance Taylor <ian@cygnus.com>
1470 * i386-dis.c (op_rtn): Change to be a pointer. Adjust uses
1471 accordingly. Don't declare functions using op_rtn.
1473 Fri Sep 27 18:28:59 1996 Stu Grossman (grossman@critters.cygnus.com)
1475 * v850-dis.c (disassemble): Add memaddr argument. Re-arrange
1476 params to be more standard.
1477 * (disassemble): Print absolute addresses and symbolic names for
1478 branch and jump targets.
1479 * v850-opc.c (v850_operand): Add displacement flag to 9 and 22
1481 * (v850_opcodes): Add breakpoint insn.
1483 Mon Sep 23 12:32:26 1996 Ian Lance Taylor <ian@cygnus.com>
1485 * m68k-opc.c: Move the fmovemx data register cases before the
1486 other cases, so that they get recognized before the data register
1487 does gets treated as a degenerate register list.
1489 Tue Sep 17 12:06:51 1996 Ian Lance Taylor <ian@cygnus.com>
1491 * mips-opc.c: Add a case for "div" and "divu" with two registers
1492 and a destination of $0.
1494 Tue Sep 10 16:12:39 1996 Fred Fish <fnf@rtl.cygnus.com>
1496 * mips-dis.c (print_insn_arg): Add prototype.
1497 (_print_insn_mips): Ditto.
1499 Mon Sep 9 14:26:26 1996 Ian Lance Taylor <ian@cygnus.com>
1501 * mips-dis.c (print_insn_arg): Print condition code registers as
1504 Tue Sep 3 12:09:46 1996 Doug Evans <dje@canuck.cygnus.com>
1506 * sparc-opc.c (sparc_opcodes): Add setuw, setsw, setx.
1508 Tue Sep 3 12:05:25 1996 Jeffrey A Law (law@cygnus.com)
1510 * v850-dis.c (disassemble): Make static. Provide prototype.
1512 Sun Sep 1 22:30:40 1996 Jeffrey A Law (law@cygnus.com)
1514 * v850-opc.c (insert_d9, insert_d22): Fix boundary case
1517 Sat Aug 31 01:27:26 1996 Jeffrey A Law (law@cygnus.com)
1519 * v850-dis.c (disassemble): Handle insertion of ',', '[' and
1520 ']' characters into the output stream.
1521 * v850-opc.c (v850_opcodes: Remove size field from all opcodes.
1522 Add "memop" field to all opcodes (for the disassembler).
1523 Reorder opcodes so that "nop" comes before "mov" and "jr"
1524 comes before "jarl".
1526 * v850-dis.c (print_insn_v850): Fix typo in last change.
1528 * v850-dis.c (print_insn_v850): Properly handle disassembling
1529 a two byte insn at the end of a memory region when the memory
1530 region's size is only two byte aligned.
1532 * v850-dis.c (v850_cc_names): Fix stupid thinkos.
1534 * v850-dis.c (v850_reg_names): Define.
1535 (v850_sreg_names, v850_cc_names): Likewise.
1536 (disassemble): Very rough cut at printing operands (unformatted).
1538 * v850-opc.c (BOP_MASK): Fix.
1539 (v850_opcodes): Fix mask for jarl and jr.
1541 * v850-dis.c: New file. Skeleton for disassembler support.
1542 * Makefile.in Remove v850 references, they're not needed here.
1543 * configure.in: Add v850-dis.o when building v850 toolchains.
1544 * configure: Rebuilt.
1545 * disassemble.c (disassembler): Call v850 disassembler.
1547 * v850-opc.c (insert_d8_7, extract_d8_7): New functions.
1548 (insert_d8_6, extract_d8_6): New functions.
1549 (v850_operands): Rename D7S to D7; operand for D7 is unsigned.
1550 Rename D8 to D8_7, use {insert,extract}_d8_7 routines.
1552 (IF4A, IF4B): Use "D7" instead of "D7S".
1553 (IF4C, IF4D): Use "D8_7" instead of "D8".
1554 (IF4E, IF4F): New. Use "D8_6".
1555 (v850_opcodes): Use IF4A/IF4B for sld.b/sst.b. Use IF4C/IF4D for
1556 sld.h/sst.h. Use IF4E/IF4F for sld.w/sst.w.
1558 * v850-opc.c (insert_d16_15, extract_d16_15): New functions.
1559 (v850_operands): Change D16 to D16_15, use special insert/extract
1560 routines. New new D16 that uses the generic insert/extract code.
1561 (IF7A, IF7B): Use D16_15.
1562 (IF7C, IF7D): New. Use D16.
1563 (v850_opcodes): Use IF7C and IF7D for ld.b and st.b.
1565 * v850-opc.c (insert_d9, insert_d22): Slightly improve error
1566 message. Issue an error if the branch offset is odd.
1568 * v850-opc.c: Add notes about needing special insert/extract
1569 for all the load/store insns, except "ld.b" and "st.b".
1571 * v850-opc.c (insert_d22, extract_d22): New functions.
1572 (v850_operands): Use insert_d22 and extract_d22 for
1574 (insert_d9): Fix range check.
1576 Fri Aug 30 18:01:02 1996 J.T. Conklin <jtc@hippo.cygnus.com>
1578 * v850-opc.c (v850_operands): Add V850_OPERAND_SIGNED flag
1579 and set bits field to D9 and D22 operands.
1581 Thu Aug 29 11:10:46 1996 Jeffrey A Law (law@cygnus.com)
1583 * v850-opc.c (v850_operands): Define SR2 operand.
1584 (v850_opcodes): "ldsr" uses R1,SR2.
1586 * v850-opc.c (v850_opcodes): Fix opcode specs for
1587 sld.w, sst.b, sst.h, sst.w, and nop.
1589 Wed Aug 28 15:55:43 1996 Jeffrey A Law (law@cygnus.com)
1591 * v850-opc.c (v850_opcodes): Add null opcode to mark the
1592 end of the opcode table.
1594 Mon Aug 26 13:35:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1596 * d10v-opc.c (pre_defined_registers): Added register pairs,
1597 "r0-r1", "r2-r3", etc.
1599 Fri Aug 23 00:27:01 1996 Jeffrey A Law (law@cygnus.com)
1601 * v850-opc.c (v850_operands): Make I16 be a signed operand.
1602 Create I16U for an unsigned 16bit mmediate operand.
1603 (v850_opcodes): Use I16U for "ori", "andi" and "xori".
1605 * v850-opc.c (v850_operands): Define EP operand.
1606 (IF4A, IF4B, IF4C, IF4D): Use EP.
1608 * v850-opc.c (v850_opcodes): Fix opcode numbers for "mov"
1609 with immediate operand, "movhi". Tweak "ldsr".
1611 * v850-opc.c (v850_opcodes): Get ld.[bhw] and st.[bhw]
1612 correct. Get sld.[bhw] and sst.[bhw] closer.
1614 * v850-opc.c (v850_operands): "not" is a two byte insn
1616 * v850-opc.c (v850_opcodes): Correct bit pattern for setf.
1618 * v850-opc.c (v850_operands): D16 inserts at offset 16!
1620 * v850-opc.c (two): Get order of words correct.
1622 * v850-opc.c (v850_operands): I16 inserts at offset 16!
1624 * v850-opc.c (v850_operands): Add "SR1" and "SR2" for system
1625 register source and destination operands.
1626 (v850_opcodes): Use SR1 and SR2 for "ldsr" and "stsr".
1628 * v850-opc.c (v850_opcodes): Fix thinko in "jmp" opcode. Fix
1629 same thinko in "trap" opcode.
1631 * v850-opc.c (v850_opcodes): Add initializer for size field
1634 * v850-opc.c (v850_operands): D6 -> DS7. References changed.
1635 Add D8 for 8-bit unsigned field in short load/store insns.
1636 (IF4A, IF4D): These both need two registers.
1637 (IF4C, IF4D): Define. Use 8-bit unsigned field.
1638 (v850_opcodes): For "sld.h", "sld.w", "sst.h", "sst.w", use
1639 IF4C & IF4D. For "trap" use I5U, not I5. Add IF1 operand
1640 for "ldsr" and "stsr".
1641 * v850-opc.c (v850_operands): 3-bit immediate for bit insns
1644 * v850-opc.c (v850_opcodes): Correct short store half (sst.h) and
1645 short store word (sst.w).
1647 Thu Aug 22 16:57:27 1996 J.T. Conklin <jtc@rtl.cygnus.com>
1649 * v850-opc.c (v850_operands): Added insert and extract fields,
1650 pointers to functions that handle unusual operand encodings.
1652 Thu Aug 22 01:05:24 1996 Jeffrey A Law (law@cygnus.com)
1654 * v850-opc.c (v850_opcodes): Enable "trap".
1656 * v850-opc.c (v850_opcodes): Fix order of displacement
1657 and register for "set1", "clr1", "not1", and "tst1".
1659 Wed Aug 21 18:46:26 1996 Jeffrey A Law (law@cygnus.com)
1661 * v850-opc.c (v850_operands): Add "B3" support.
1662 (v850_opcodes): Fix and enable "set1", "clr1", "not1"
1665 * v850-opc.c (v850_opcodes): "jmp" has only an R1 operand.
1667 * v850-opc.c: Close unterminated comment.
1669 Wed Aug 21 17:31:26 1996 J.T. Conklin <jtc@hippo.cygnus.com>
1671 * v850-opc.c (v850_operands): Add flags field.
1672 (v850_opcodes): add move opcodes.
1674 Tue Aug 20 14:41:03 1996 J.T. Conklin <jtc@hippo.cygnus.com>
1676 * Makefile.in (ALL_MACHINES): Add v850-opc.o.
1677 * configure: (bfd_v850v_arch) Add new case.
1678 * configure.in: (bfd_v850_arch) Add new case.
1679 * v850-opc.c: New file.
1681 Mon Aug 19 15:21:38 1996 Doug Evans <dje@canuck.cygnus.com>
1683 * sparc-dis.c (print_insn_sparc): Handle little endian sparcs.
1685 Thu Aug 15 13:14:43 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1687 * d10v-opc.c: Add additional information to the opcode
1688 table to help determinine which instructions can be done
1691 Thu Aug 15 13:11:13 1996 Stan Shebs <shebs@andros.cygnus.com>
1693 * mpw-make.sed: Update editing of include pathnames to be
1696 Thu Aug 15 16:28:41 1996 James G. Smith <jsmith@cygnus.co.uk>
1698 * arm-opc.h: Added "bx" instruction definition.
1700 Wed Aug 14 17:00:04 1996 Richard Henderson <rth@tamu.edu>
1702 * alpha-opc.c (EV4EXTHWINDEX): Field width should be 8 not 5.
1704 Mon Aug 12 14:30:37 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1706 * d10v-opc.c (d10v_opcodes): Minor fixes to addi and bl.l.
1708 Fri Aug 9 13:21:59 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1710 * d10v-opc.c (d10v_opcodes): Correct 'mv' unit entry to EITHER.
1712 Thu Aug 8 12:43:52 1996 Klaus Kaempf <kkaempf@progis.de>
1714 * makefile.vms: Update for alpha-opc changes.
1716 Wed Aug 7 11:55:10 1996 Ian Lance Taylor <ian@cygnus.com>
1718 * i386-dis.c (print_insn_i386): Actually return the correct value.
1719 (ONE, OP_ONE): #ifdef out; not used.
1721 Fri Aug 2 17:47:03 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1723 * d10v-opc.c (d10v_opcodes): Added 2 accumulator sub instructions.
1724 Changed subi operand type to treat 0 as 16.
1726 Wed Jul 31 16:21:41 1996 Ian Lance Taylor <ian@cygnus.com>
1728 * m68k-opc.c: Add cpushl for the mcf5200. From Ken Rose
1731 Wed Jul 31 14:39:27 1996 James G. Smith <jsmith@cygnus.co.uk>
1733 * arm-opc.h: (arm_opcodes): Added halfword and sign-extension
1734 memory transfer instructions. Add new format string entries %h and %s.
1735 * arm-dis.c: (print_insn_arm): Provide decoding of the new
1738 Fri Jul 26 11:45:04 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1740 * d10v-opc.c (d10v_operands): Added UNUM4S; a 4-bit accumulator shift.
1741 (d10v_opcodes): Modified accumulator shift instructions to use UNUM4S.
1743 Fri Jul 26 14:01:43 1996 Ian Lance Taylor <ian@cygnus.com>
1745 * alpha-dis.c (print_insn_alpha_osf): Remove.
1746 (print_insn_alpha_vms): Remove.
1747 (print_insn_alpha): Make globally visible. Chose the register
1748 names based on info->flavour.
1749 * disassemble.c: Always return print_insn_alpha for the alpha.
1751 Thu Jul 25 15:24:17 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1753 * d10v-dis.c (dis_long): Handle unknown opcodes.
1755 Thu Jul 25 12:08:09 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1757 * d10v-opc.c: Changes to support signed and unsigned numbers.
1758 All instructions with the same name that have long and short forms
1759 now end in ".l" or ".s". Divs added.
1760 * d10v-dis.c: Changes to support signed and unsigned numbers.
1762 Tue Jul 23 11:02:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1764 * d10v-dis.c: Change all functions to use info->print_address_func.
1766 Mon Jul 22 15:38:53 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1768 * m68k-opc.c (m68k_opcodes): Make opcode masks for the ColdFire
1769 move ccr/sr insns more strict so that the disassembler only
1770 selects them when the addressing mode is data register.
1772 Mon Jul 22 11:25:24 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1773 * d10v-opc.c (pre_defined_registers): Declare.
1774 * d10v-dis.c (print_operand): Now uses pre_defined_registers
1775 to pick a better name for the registers.
1777 Mon Jul 22 13:47:23 1996 Ian Lance Taylor <ian@cygnus.com>
1779 * sparc-opc.c: Fix opcode values for fpack16, and fpackfix. Fix
1780 operands for fexpand and fpmerge. From Christian Kuehnke
1781 <Christian.Kuehnke@arbi.informatik.uni-oldenburg.de>.
1783 Mon Jul 22 13:17:06 1996 Richard Henderson <rth@tamu.edu>
1785 * alpha-dis.c (print_insn_alpha): No longer the user-visible
1786 print routine. Take new regnames and cpumask arguments.
1787 Kill the environment variable nonsense.
1788 (print_insn_alpha_osf): New function. Do OSF/1 style regnames.
1789 (print_insn_alpha_vms): New function. Do VMS style regnames.
1790 * disassemble.c (disassembler): Test bfd flavour to pick
1791 between OSF and VMS routines. Default to OSF.
1793 Thu Jul 18 17:19:34 1996 Ian Lance Taylor <ian@cygnus.com>
1795 * configure.in: Call AC_SUBST (INSTALL_SHLIB).
1796 * configure: Rebuild.
1797 * Makefile.in (install): Use @INSTALL_SHLIB@.
1799 Wed Jul 17 14:39:05 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1801 * configure: (bfd_d10v_arch) Add new case.
1802 * configure.in: (bfd_d10v_arch) Add new case.
1803 * d10v-dis.c: New file.
1804 * d10v-opc.c: New file.
1805 * disassemble.c (disassembler) Add entry for d10v.
1807 Wed Jul 17 10:12:05 1996 J.T. Conklin <jtc@rtl.cygnus.com>
1809 * m68k-opc.c (m68k_opcodes): Fix bugs in coldfire insns relating
1810 to bcc, trapfl, subxl, and wddata discovered by Andreas Schwab.
1812 Mon Jul 15 16:59:55 1996 Stu Grossman (grossman@critters.cygnus.com)
1814 * i386-dis.c: Get rid of print_insn_i8086. Use info.mach to
1815 distinguish between variants of the instruction set.
1816 * sparc-dis.c: Get rid of print_insn_sparclite. Use info.mach to
1817 distinguish between variants of the instruction set.
1819 Fri Jul 12 10:12:01 1996 Stu Grossman (grossman@critters.cygnus.com)
1821 * i386-dis.c (print_insn_i8086): New routine to disassemble using
1822 the 8086 instruction set.
1823 * i386-dis.c: General cleanups. Make most things static. Add
1824 prototypes. Get rid of static variables aflags and dflags. Pass
1825 them as args (to almost everything).
1827 Thu Jul 11 11:58:44 1996 Jeffrey A Law (law@cygnus.com)
1829 * h8300-dis.c (bfd_h8_disassemble): Handle macregs in ldmac insns.
1831 * h8300-dis.c (bfd_h8_disassemble): Handle "ldm.l" and "stm.l".
1833 * h8300-dis.c (bfd_h8_disassemble): "abs" is implicitly two
1834 if the next arg is marked with SRC_IN_DST. Gross.
1836 * h8300-dis.c (bfd_h8_disassemble): Print "exr" when
1837 we're looking for and find EXR.
1839 * h8300-dis.c (bfd_h8_disassemble): We don't have a match
1840 if we're looking for KBIT and we don't find it.
1842 * h8300-dis.c (bfd_h8_disassemble): Mask off unwanted bits
1845 * h8300-dis.c (bfd_h8_disassemble): Don't set plen for
1846 3bit immediate operands.
1848 Tue Jul 9 10:55:20 1996 Ian Lance Taylor <ian@cygnus.com>
1850 * Released binutils 2.7.
1852 * alpha-opc.c: Add new case of "mov". From Klaus Kaempf
1853 <kkaempf@progis.ac-net.de>.
1855 Thu Jul 4 11:42:51 1996 Ian Lance Taylor <ian@cygnus.com>
1857 * alpha-opc.c: Correct second case of "mov" to use OPRL.
1859 Wed Jul 3 16:03:47 1996 Stu Grossman (grossman@critters.cygnus.com)
1861 * sparc-dis.c (print_insn_sparclite): New routine to print
1862 sparclite instructions.
1864 Wed Jul 3 14:21:18 1996 J.T. Conklin <jtc@rtl.cygnus.com>
1866 * m68k-opc.c (m68k_opcodes): Add coldfire support.
1868 Fri Jun 28 15:53:51 1996 Doug Evans <dje@canuck.cygnus.com>
1870 * sparc-opc.c (asi_table): Add #ASI_N, #ASI_N_L, #ASI_NUCLEUS,
1871 #ASI_NUCLEUS_LITTLE. Rename #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_L
1872 to #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_LITTLE.
1874 Tue Jun 25 22:58:31 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
1876 * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir):
1877 Use autoconf-set values.
1878 (docdir, oldincludedir): Removed.
1879 * configure.in (AC_PREREQ): autoconf 2.5 or higher.
1881 Fri Jun 21 13:53:36 1996 Richard Henderson <rth@tamu.edu>
1883 * alpha-opc.c: New file.
1884 * alpha-opc.h: Remove.
1885 * alpha-dis.c: Complete rewrite to use new opcode table.
1886 * configure.in: For bfd_alpha_arch, use alpha-opc.o.
1887 * configure: Rebuild with autoconf 2.10.
1888 * Makefile.in (ALL_MACHINES): Add alpha-opc.o.
1889 (alpha-dis.o): Depend upon $(INCDIR)/opcode/alpha.h, not
1891 (alpha-opc.o): New target.
1893 Wed Jun 19 15:55:12 1996 Ian Lance Taylor <ian@cygnus.com>
1895 * sparc-dis.c (print_insn_sparc): Remove unused local variable i.
1896 Set imm_added_to_rs1 even if the source and destination register
1899 * sparc-opc.c: Add some two operand forms of the wr instruction.
1901 Tue Jun 18 15:58:27 1996 Jeffrey A. Law <law@rtl.cygnus.com>
1903 * h8300-dis.c (bfd_h8_disassemble): Rename "hmode" argument
1906 * disassemble.c (disassembler): Handle H8/S.
1907 * h8300-dis.c (print_insn_h8300s): New function for H8/S.
1909 Tue Jun 18 18:06:50 1996 Ian Lance Taylor <ian@cygnus.com>
1911 * sparc-opc.c: Add beq/teq as aliases for be/te.
1913 * ppc-opc.c: Fix fcmpo opcode. From Sergei Steshenko
1914 <sergei@msil.sps.mot.com>.
1916 Tue Jun 18 15:08:54 1996 Klaus Kaempf <kkaempf@progis.de>
1918 * makefile.vms: New file.
1920 * alpha-dis.c (print_insn_alpha): Print lda ra,lit(rz) as mov.
1922 Mon Jun 10 18:50:38 1996 Ian Lance Taylor <ian@cygnus.com>
1924 * h8300-dis.c (bfd_h8_disassemble): Always print ABS8MEM with :8,
1927 Tue Jun 4 09:15:53 1996 Doug Evans <dje@canuck.cygnus.com>
1929 * i386-dis.c (OP_OFF): Call append_prefix.
1931 Thu May 23 15:18:23 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1933 * ppc-opc.c (instruction encoding macros): Add explicit casts to
1934 unsigned long to silence a warning from the Solaris PowerPC
1937 Thu Apr 25 19:33:32 1996 Doug Evans <dje@canuck.cygnus.com>
1939 * sparc-opc.c (sparc_opcodes): Add ultrasparc vis extensions.
1941 Mon Apr 22 17:12:35 1996 Doug Evans <dje@blues.cygnus.com>
1943 * sparc-dis.c (X_IMM,X_SIMM): New macros.
1945 (print_insn_sparc): Merge cases i,I,j together. New cases X,Y.
1946 * sparc-opc.c (sparc_opcodes): Use X for 5 bit shift constants,
1947 Y for 6 bit shift constants. Rewrite entries for crdcxt, cwrcxt,
1948 cpush, cpusha, cpull sparclet insns.
1950 Wed Apr 17 14:20:22 1996 Doug Evans <dje@canuck.cygnus.com>
1952 * sparc-dis.c (compute_arch_mask): Replace ANSI style def with K&R.
1954 Thu Apr 11 17:30:02 1996 Ian Lance Taylor <ian@cygnus.com>
1956 * sparc-opc.c: Set F_FBR on floating point branch instructions.
1957 Set F_FLOAT on other floating point instructions.
1959 Mon Apr 8 17:02:48 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1961 * ppc-opc.c (PPC860): Macro for 860/821 specific instructions and
1963 (powerpc_opcodes): Add 860/821 specific SPRs.
1965 Mon Apr 8 14:00:44 1996 Ian Lance Taylor <ian@cygnus.com>
1967 * configure.in: Permit --enable-shared to specify a list of
1968 directories. Set and substitute BFD_PICLIST.
1969 * configure: Rebuild.
1970 * Makefile.in (BFD_PICLIST): Rename from BFD_LIST. Change all
1971 uses. Set to @BFD_PICLIST@.
1973 Fri Apr 5 17:12:27 1996 Jeffrey A Law (law@cygnus.com)
1975 * h8300-dis.c (bfd_h8_disassemble): Use "bit" for L_3 immediates,
1976 not "abs", which may be needed for the absolute in something
1977 like btst #0,@10:8. Print L_3 immediates separately from other
1978 immediates. Change ABSMOV reference to ABS8MEM.
1980 Wed Apr 3 10:40:45 1996 Doug Evans <dje@canuck.cygnus.com>
1982 * sparc-dis.c (opcodes_initialized): Move inside print_insn_sparc.
1983 (current_arch_mask): New static global.
1984 (compute_arch_mask): New static function.
1985 (print_insn_sparc): Delete sparc_v9_p. New static local
1986 current_mach. Resort opcode table if current_mach changes.
1987 Generalize "insn not supported" test.
1988 (compare_opcodes): Prefer supported opcodes to nonsupported ones.
1989 Delete test for v9/!v9.
1990 * sparc-opc.c (MASK_*): Use SPARC_OPCODE_ARCH_MASK.
1992 (brfc): Split into CBR and FBR for coprocessor/fp branches.
1993 (brfcx): Renamed to FBRX.
1994 (condfc): Renamed to CONDFC. Pass v6notlet to CBR (standard
1995 coprocessor mnemonics are not supported on the sparclet).
1996 (condf): Renamed to CONDF.
1997 (SLCBCC2): Delete F_ALIAS flag.
1999 Sat Mar 30 21:45:59 1996 Doug Evans <dje@canuck.cygnus.com>
2001 * sparc-opc.c (sparc_opcodes): rd must be 0 for
2002 mov foo,{%y,%psr,%wim,%tbr}. Support mov foo,%asrX.
2004 Fri Mar 29 13:02:40 1996 Ian Lance Taylor <ian@cygnus.com>
2006 * Makefile.in (config.status): Depend upon BFD VERSION file, so
2007 that the shared library version number is set correctly.
2009 Tue Mar 26 15:47:14 1996 Ian Lance Taylor <ian@cygnus.com>
2011 * configure.in: Use AC_CHECK_TOOL to find ar and ranlib. From
2012 Miles Bader <miles@gnu.ai.mit.edu>.
2013 * configure: Rebuild.
2015 Sat Mar 16 13:04:07 1996 Fred Fish <fnf@cygnus.com>
2017 * z8kgen.c (internal, gas): Call xmalloc rather than unchecked
2020 Tue Mar 12 12:14:10 1996 Ian Lance Taylor <ian@cygnus.com>
2022 * configure: Rebuild with autoconf 2.8.
2024 Thu Mar 7 15:11:10 1996 Doug Evans <dje@charmed.cygnus.com>
2026 * sparc-dis.c (print_insn_sparc): Handle 'O' operand char like 'r'.
2027 * sparc-opc.c (sparc_opcodes): Use 'O' operand char for `neg reg'.
2029 Tue Mar 5 15:51:57 1996 Ian Lance Taylor <ian@cygnus.com>
2031 * configure.in: Don't set SHLIB or SHLINK to an empty string,
2032 since they appear as targets in Makefile.in.
2033 * configure: Rebuild.
2035 Mon Feb 26 13:03:40 1996 Stan Shebs <shebs@andros.cygnus.com>
2037 * mpw-make.sed: Edit out shared library support bits.
2039 Tue Feb 20 20:48:28 1996 Doug Evans <dje@charmed.cygnus.com>
2041 * sparc-opc.c (v8,v6notv9): Add MASK_SPARCLET.
2042 (sparc_opcode_archs): Add MASK_V8 to sparclet entry.
2043 (sparc_opcodes): Add sparclet insns.
2044 (sparclet_cpreg_table): New static local.
2045 (sparc_{encode,decode}_sparclet_cpreg): New functions.
2046 * sparc-dis.c (print_insn_sparc): Handle sparclet cpregs.
2048 Tue Feb 20 11:02:44 1996 Alan Modra <alan@mullet.Levels.UniSA.Edu.Au>
2050 * i386-dis.c (index16): New static variable.
2051 (putop): Print jecxz for 32 bit case, jcxz for 16 bit, not the
2053 (OP_indirE): Return result of OP_E.
2054 (OP_E): Check for 16 bit addressing mode, and disassemble
2055 correctly. Optimised 32 bit case a little. Don't print
2056 "(base,index,scale)" when sib specifies only an offset.
2058 Mon Feb 19 12:32:17 1996 Ian Lance Taylor <ian@cygnus.com>
2060 * configure.in: Set and substitute SHLIB_DEP.
2061 * configure: Rebuild.
2062 * Makefile.in (SHLIB_DEP): New variable.
2063 (LIBIBERTY_LISTS, BFD_LIST): New variables.
2064 (stamp-piclist): Depend upon LIBIBERTY_LISTS and BFD_LIST. If
2065 COMMON_SHLIB, add them to piclist with appropriate modifications.
2066 ($(SHLIB)): Depend upon $(SHLIB_DEP). Don't check COMMON_SHLIB
2067 here: just use piclist.
2069 Mon Feb 19 02:03:50 1996 Doug Evans <dje@charmed.cygnus.com>
2071 * sparc-dis.c (MASK_V9,V9_ONLY_P,V9_P): Define.
2072 (print_insn_sparc): Rewrite v9/not-v9 tests.
2073 (compare_opcodes): Likewise.
2074 * sparc-opc.c (MASK_<ARCH>): Define.
2075 (v6,v7,v8,sparclite,v9,v9a): Redefine.
2076 (sparclet,v6notv9): Define.
2077 (sparc_opcode_archs): Delete member `conflicts'. Add `supported'.
2078 (sparc_opcodes): Delete F_NOTV9, use v6notv9 instead.
2080 Thu Feb 15 14:45:05 1996 Ian Lance Taylor <ian@cygnus.com>
2082 * configure.in: Call AC_PROG_CC before configure.host.
2083 * configure: Rebuild.
2085 * Makefile.in (SONAME): Remove leading ../bfd/ from $(SHLIB).
2087 Wed Feb 14 19:01:27 1996 Alan Modra <alan@spri.levels.unisa.edu.au>
2089 * i386-dis.c (onebyte_has_modrm): New static array.
2090 (twobyte_has_modrm): New static array.
2091 (print_insn_i386): Only fetch the mod/reg/rm byte if it is needed.
2093 Tue Feb 13 15:15:01 1996 Ian Lance Taylor <ian@cygnus.com>
2095 * Makefile.in ($(SHLINK)): Check ts against $(SHLIB), not
2098 Mon Feb 12 16:26:06 1996 Michael Meissner <meissner@tiktok.cygnus.com>
2100 * ppc-opc.c (PPC): Undef, so default defination on Windows NT
2103 Wed Feb 7 13:59:54 1996 Ian Lance Taylor <ian@cygnus.com>
2105 * m68k-opc.c (m68k_opcodes): The bkpt instruction is supported on
2106 m68010up, not just m68020up | cpu32.
2108 * Makefile.in (SONAME): New variable.
2109 ($(SHLINK)): Make a link to the transformed name, as well.
2110 (stamp-tshlink): New target.
2111 (install): Skip stamp-tshlink during install.
2113 Tue Feb 6 12:28:54 1996 Ian Lance Taylor <ian@cygnus.com>
2115 * configure.in: Call AC_ARG_PROGRAM.
2116 * configure: Rebuild.
2117 * Makefile.in (program_transform_name): New variable.
2118 (install): Transform library name before installing it.
2120 Mon Feb 5 16:14:42 1996 Ian Lance Taylor <ian@cygnus.com>
2122 * i960-dis.c (mem): Add HX dcinva instruction.
2124 Support for building as a shared library, based on patches from
2125 Alan Modra <alan@spri.levels.unisa.edu.au>:
2126 * configure.in: Add AC_ARG_ENABLE for shared and commonbfdlib.
2127 New substitutions: ALLLIBS, PICFLAG, SHLIB, SHLIB_CC,
2128 SHLIB_CFLAGS, COMMON_SHLIB, SHLINK.
2129 * configure: Rebuild.
2130 * Makefile.in (ALLLIBS): New variable.
2131 (PICFLAG, SHLIB, SHLIB_CC, SHLIB_CFLAGS): New variables.
2132 (COMMON_SHLIB, SHLINK): New variables.
2133 (.c.o): If PICFLAG is set, compile twice, once PIC, once normal.
2134 (STAGESTUFF): Remove variable.
2135 (all): Depend upon $(ALLLIBS) rather than $(TARGETLIB).
2136 (stamp-piclist, piclist): New targets.
2137 ($(SHLIB), $(SHLINK)): New targets.
2138 ($(OFILES)): Depend upon stamp-picdir.
2139 (disassemble.o): Build twice if PICFLAG is set.
2140 (MOSTLYCLEAN): Add pic/*.o.
2141 (clean): Remove $(SHLIB), $(SHLINK), piclist, and stamp-piclist.
2142 (distclean): Remove pic and stamp-picdir.
2143 (install): Install shared libraries.
2144 (stamp-picdir): New target.
2146 Fri Feb 2 17:15:25 1996 Doug Evans <dje@charmed.cygnus.com>
2148 * sparc-dis.c (print_insn_sparc): Delete DISASM_RAW_INSN support.
2149 Print unknown instruction as "unknown", rather than in hex.
2151 Tue Jan 30 14:06:08 1996 Ian Lance Taylor <ian@cygnus.com>
2153 * dis-buf.c: Include "sysdep.h" before "dis-asm.h".
2155 Thu Jan 25 20:24:07 1996 Doug Evans <dje@charmed.cygnus.com>
2157 * sparc-opc.c (sparc_opcode_archs): Mark v8/sparclite as conflicting.
2159 Thu Jan 25 11:56:49 1996 Ian Lance Taylor <ian@cygnus.com>
2161 * i386-dis.c (print_insn_i386): Only fetch the mod/reg/rm byte
2162 when necessary. From Ulrich Drepper
2163 <drepper@myware.rz.uni-karlsruhe.de>.
2165 Thu Jan 25 03:39:10 1996 Doug Evans <dje@charmed.cygnus.com>
2167 * sparc-dis.c (print_insn_sparc): NUMOPCODES replaced with
2168 sparc_num_opcodes. Update architecture enum values.
2169 * sparc-opc.c (sparc_opcode_archs): Replaces architecture_pname.
2170 (sparc_opcode_lookup_arch): New function.
2171 (sparc_num_opcodes): Renamed from bfd_sparc_num_opcodes.
2172 (sparc_opcodes): Add v9a shutdown insn.
2174 Mon Jan 22 08:29:59 1996 Doug Evans <dje@charmed.cygnus.com>
2176 * sparc-dis.c (print_insn_sparc): Renamed from print_insn.
2177 If DISASM_RAW_INSN, print insn in hex. Handle v9a as opcode
2179 (print_insn_sparc64): Deleted.
2180 * disassemble.c (disassembler, case bfd_arch_sparc): Always use
2183 * sparc-opc.c (architecture_pname): Add v9a.
2185 Fri Jan 12 14:35:58 1996 David Mosberger-Tang <davidm@AZStarNet.com>
2187 * alpha-opc.h (alpha_insn_set): VAX floating point opcode was
2188 incorrectly defined as 0x16 when it should be 0x15.
2189 (FLOAT_FORMAT_MASK): function code is 11 bits, not just 7 bits!
2190 (alpha_insn_set): added cvtst and cvttq float ops. Also added
2191 excb (exception barrier) which is defined in the Alpha
2192 Architecture Handbook version 2.
2193 * alpha-dis.c (print_insn_alpha): Fixed special-case decoding for
2194 OPERATE_FORMAT_CODE type instructions. The bug caused mulq to be
2195 disassembled as or, for example.
2197 Wed Jan 10 12:37:22 1996 Ian Lance Taylor <ian@cygnus.com>
2199 * mips-dis.c (print_insn_arg): Print cases 'i' and 'u' in hex.
2200 (_print_insn_mips): Change i from int to unsigned int.
2202 Thu Jan 4 17:21:10 1996 David Edelsohn <edelsohn@mhpcc.edu>
2204 * ppc-opc.c (powerpc_opcodes): tlbi POWER opcode form different
2205 from tlbie PowerPC opcode. Add PPC603 tlbld and tlbli.
2207 Thu Dec 28 13:29:19 1995 John Hassey <hassey@rtp.dg.com>
2209 * i386-dis.c: Added Pentium Pro instructions.
2211 Tue Dec 19 22:56:35 1995 Michael Meissner <meissner@tiktok.cygnus.com>
2213 * ppc-opc.c (fsqrt{,.}): Duplicate for PowerPC in addition to
2216 Fri Dec 15 14:14:15 1995 J.T. Conklin <jtc@rtl.cygnus.com>
2218 * sh-opc.h (sh_nibble_type): Added REG_B.
2219 (sh_arg_type): Added A_REG_B.
2220 (sh_table): Added pref and bank reg versions of ldc, ldc.l, stc
2222 * sh-dis.c (print_insn_shx): Added cases for REG_B and A_REG_B.
2224 Fri Dec 15 16:44:31 1995 Ian Lance Taylor <ian@cygnus.com>
2226 * disassemble.c (disassembler): Use new bfd_big_endian macro.
2228 Tue Dec 12 12:22:24 1995 Ian Lance Taylor <ian@cygnus.com>
2230 * Makefile.in (distclean): Remove stamp-h. From Ronald
2231 F. Guilmette <rfg@monkeys.com>.
2233 Tue Dec 5 13:42:44 1995 Stan Shebs <shebs@andros.cygnus.com>
2235 From David Mosberger-Tang <davidm@azstarnet.com>:
2236 * alpha-dis.c (print_insn_alpha): fixed decoding of cpys
2239 Mon Dec 4 12:29:05 1995 J.T. Conklin <jtc@rtl.cygnus.com>
2241 * sh-opc.h (sh_arg_type): Added A_SSR and A_SPC.
2242 (sh_table): Added many SH3 opcodes.
2243 * sh-dis.c (print_insn_shx): Added cases for A_SSR and A_SPC.
2245 Fri Dec 1 07:42:18 1995 Michael Meissner <meissner@tiktok.cygnus.com>
2247 * ppc-opc.c (subfc., subfco): Mark this PPCCOM, not PPC.
2248 (subco,subco.): Mark this PPC, not PPCCOM.
2250 Mon Nov 27 13:09:52 1995 Ian Lance Taylor <ian@cygnus.com>
2252 * configure: Rebuild with autoconf 2.7.
2254 Tue Nov 21 18:28:06 1995 Ian Lance Taylor <ian@cygnus.com>
2256 * configure: Rebuild with autoconf 2.6.
2258 Wed Nov 15 19:02:53 1995 Ken Raeburn <raeburn@cygnus.com>
2260 * configure.in: Sort list of architectures. Accept but do nothing
2261 for alliant, convex, pyramid, romp, and tahoe.
2263 Wed Nov 8 20:18:59 1995 Ian Lance Taylor <ian@cygnus.com>
2265 * a29k-dis.c (print_special): Change num to unsigned int.
2267 Wed Nov 8 20:10:35 1995 Eric Freudenthal <freudenthal@nyu.edu>
2269 * a29k-dis.c (print_insn): Cast insn24 to unsigned long when
2272 Tue Nov 7 15:21:06 1995 Ian Lance Taylor <ian@cygnus.com>
2274 * configure.in: Call AC_CHECK_PROG to find and cache AR.
2275 * configure: Rebuilt.
2277 Mon Nov 6 17:39:47 1995 Harry Dolan <dolan@ssd.intel.com>
2279 * configure.in: Add case for bfd_i860_arch.
2280 * configure: Rebuild.
2282 Fri Nov 3 12:45:31 1995 Ian Lance Taylor <ian@cygnus.com>
2284 * m68k-opc.c (m68k_opcodes): Correct fmoveml operands.
2285 * m68k-dis.c (NEXTSINGLE): Change i to unsigned int.
2286 (NEXTDOUBLE): Likewise.
2287 (print_insn_m68k): Don't match fmoveml if there is more than one
2288 register in the list.
2289 (print_insn_arg): Handle a place of '8' for a type of 'L'.
2291 Thu Nov 2 23:06:33 1995 Ian Lance Taylor <ian@cygnus.com>
2293 * m68k-opc.c: Use #W rather than #w.
2294 * m68k-dis.c (print_insn_arg): Handle new 'W' place.
2296 Wed Nov 1 13:30:24 1995 Ian Lance Taylor <ian@cygnus.com>
2298 * m68k-opc.c (m68k_opcode_aliases): Add dbfw as an alias for dbf,
2299 and likewise for all the dbxx opcodes.
2301 Mon Oct 30 20:50:40 1995 Fred Fish <fnf@cygnus.com>
2303 * arc-dis.c: Include elf-bfd.h rather than libelf.h.
2305 Mon Oct 23 11:11:34 1995 James G. Smith <jsmith@pasanda.cygnus.co.uk>
2307 * mips-opc.c: Added shorthand (V1) for INSN_4100 manifest. Added
2308 the VR4100 specific instructions to the mips_opcodes structure.
2310 Thu Oct 19 11:05:23 1995 Stan Shebs <shebs@andros.cygnus.com>
2312 * mpw-config.in, mpw-make.sed: Remove ugly workaround for
2313 ugly Metrowerks bug in CW6, is fixed in CW7.
2315 Mon Oct 16 12:59:01 1995 Michael Meissner <meissner@tiktok.cygnus.com>
2317 * ppc-opc.c (whole file): Add flags for common/any support.
2319 Tue Oct 10 11:06:07 1995 Fred Fish <fnf@cygnus.com>
2321 * Makefile.in (BISON): Remove macro.
2322 (FLAGS_TO_PASS): Remove BISON.
2324 Fri Oct 6 16:26:45 1995 Ken Raeburn <raeburn@cygnus.com>
2326 Mon Sep 25 22:49:32 1995 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2328 * m68k-dis.c (print_insn_m68k): Recognize all two-word
2329 instructions that take no args by looking at the match mask.
2330 (print_insn_arg): Always print "%" before register names.
2331 [case 'c']: Use "nc" for the no-cache case, as recognized by gas.
2332 [case '_']: Don't print "@#" before address.
2333 [case 'J']: Use "%s" as format string, not register name.
2334 [case 'B']: Treat place == 'C' like 'l' and 'L'.
2336 Thu Oct 5 22:16:20 1995 Ken Raeburn <raeburn@cygnus.com>
2338 * i386-dis.c: Describe cmpxchg8b operand, and spell the opcode
2341 Tue Oct 3 08:30:20 1995 steve chamberlain <sac@slash.cygnus.com>
2343 From David Mosberger-Tang <davidm@azstarnet.com>
2345 * alpha-opc.h (MEMORY_FUNCTION_FORMAT_MASK): added.
2346 (alpha_insn_set): added definitions for VAX floating point
2347 instructions (Unix compilers don't generate these, but handcoded
2348 assembly might still use them).
2350 * alpha-dis.c (print_insn_alpha): added support for disassembling
2351 the miscellaneous instructions in the Alpha instruction set.
2353 Tue Sep 26 18:47:20 1995 Stan Shebs <shebs@andros.cygnus.com>
2355 * mpw-config.in: Add m68k-opc.c.o to BFD_MACHINES for m68k,
2356 no longer create sysdep.h, sed ppc-opc.c to work around a
2357 serious Metrowerks C bug.
2358 * mpw-make.in: Remove.
2359 * mpw-make.sed: New file, used by mpw-configure to edit
2360 Makefile.in into an MPW makefile.
2362 Wed Sep 20 12:55:28 1995 Ian Lance Taylor <ian@cygnus.com>
2364 * Makefile.in (maintainer-clean): New synonym for realclean.
2366 Tue Sep 19 15:28:36 1995 Ian Lance Taylor <ian@cygnus.com>
2368 * m68k-opc.c: Split pmove patterns which use 'P' into patterns
2369 which use '0', '1', and '2' instead. Specify the proper size for
2370 a pmove immediate operand. Correct the pmovefd patterns to be
2371 moves to a register, not from a register.
2372 * m68k-dis.c (print_insn_arg): Replace 'P' with '0', '1', '2'.
2374 Thu Sep 14 11:58:22 1995 Doug Evans <dje@canuck.cygnus.com>
2376 * sparc-opc.c (sparc_opcodes): Mark all insns that reference
2377 %psr, %wim, %tbr as F_NOTV9.
2379 Fri Sep 8 01:07:38 1995 Ian Lance Taylor <ian@cygnus.com>
2381 * Makefile.in (Makefile): Just rebuild Makefile when running
2383 (config.h, stamp-h): New targets.
2384 * configure.in: Call AC_CONFIG_HEADER and AC_CANONICAL_SYSTEM
2385 earlier. Don't bother to call AC_ARG_PROGRAM. Touch stamp-h when
2386 rebuilding config.h.
2387 * configure: Rebuild.
2389 * mips-opc.c: Change unaligned loads and stores with "t,A"
2390 operands to use "t,A(b)".
2392 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2394 * sh-dis.c (print_insn_shx): Add F_FR0 support.
2396 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2398 * sh-dis.c (print_insn_shx): Change loop over op->arg[n] to iterate
2399 until 3 instead of until 2.
2401 Wed Sep 6 21:21:33 1995 Ian Lance Taylor <ian@cygnus.com>
2403 * Makefile.in (ALL_CFLAGS): Define.
2404 (.c.o, disassemble.o): Use $(ALL_CFLAGS).
2405 (MOSTLYCLEAN): Add config.log.
2406 (distclean): Don't remove config.log.
2407 * configure.in: Substitute HDEFINES.
2408 * configure: Rebuild.
2410 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2412 * sh-opc.h (sh_arg_type): Add F_FR0.
2413 (sh_table, case fmac): Add F_FR0 as first argument.
2415 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2417 * sh-opc.h (sh_opcode_info): Increase arg array size to 4.
2419 Tue Sep 5 18:28:10 1995 Doug Evans <dje@canuck.cygnus.com>
2421 * sparc-dis.c: Remove all references to NO_V9.
2423 Tue Sep 5 20:03:26 1995 Ian Lance Taylor <ian@cygnus.com>
2425 * aclocal.m4: Just include ../bfd/aclocal.m4.
2426 * configure: Rebuild.
2428 Tue Sep 5 16:09:59 1995 Doug Evans <dje@canuck.cygnus.com>
2430 * sparc-dis.c (X_DISP19): Define.
2431 (print_insn, case 'G'): Use it.
2432 (print_insn, case 'L'): Sign extend displacement.
2434 Mon Sep 4 14:28:46 1995 Ian Lance Taylor <ian@cygnus.com>
2436 * configure.in: Run ../bfd/configure.host before AC_PROG_CC.
2437 Subsitute CFLAGS and AR. Call AC_PROG_INSTALL. Don't substitute
2438 host_makefile_frag or frags.
2439 * aclocal.m4: New file.
2440 * configure: Rebuild.
2441 * Makefile.in (INSTALL): Set to @INSTALL@.
2442 (INSTALL_PROGRAM): Set to @INSTALL_PROGRAM@.
2443 (INSTALL_DATA): Set to @INSTALL_DATA@.
2445 (AR_FLAGS): Set to rc rather than qc.
2446 (CC): Define as @CC@.
2447 (CFLAGS): Set to @CFLAGS@.
2448 (@host_makefile_frag@): Remove.
2449 (config.status): Remove dependency upon @frags@.
2451 * configure.in: ../bfd/config.bfd now just sets shell variables.
2452 Use them rather than looking through target Makefile fragments.
2453 * configure: Rebuild.
2455 Thu Aug 31 12:35:32 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2457 * sh-opc.h (ftrc): Change FPUL_N to FPUL_M.
2459 Wed Aug 30 13:52:28 1995 Doug Evans <dje@canuck.cygnus.com>
2461 * sparc-opc.c (sparc_opcodes): Delete duplicate wr %y insn.
2462 Add clrx, iprefetch, signx, clruw, cas, casl, casx, casxl synthetic
2465 * sparc-opc.c (sparc_opcodes): Fix prefetcha insn.
2466 (lookup_{name,value}): New functions.
2467 (prefetch_table): New static local.
2468 (sparc_{encode,decode}_prefetch): New functions.
2469 * sparc-dis.c (print_insn): Handle '*' arg (prefetch function).
2471 Wed Aug 30 11:11:58 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2473 * sh-opc.h: Add blank lines to improve readabililty of sh3e
2476 Wed Aug 30 11:09:38 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2478 * sh-dis.c: Correct comment on first line of file.
2480 Tue Aug 29 15:37:18 1995 Doug Evans <dje@canuck.cygnus.com>
2482 * disassemble.c (disassembler): Handle bfd_mach_sparc64.
2484 * sparc-opc.c (asi, membar): New static locals.
2485 (sparc_{encode,decode}_{asi,membar}): New functions.
2486 (sparc_opcodes, membar insn): Fix.
2487 * sparc-dis.c (print_insn): Call sparc_decode_asi.
2488 Support decoding of membar masks.
2491 Sat Aug 26 21:22:48 1995 Ian Lance Taylor <ian@cygnus.com>
2493 * m68k-opc.c (m68k_opcode_aliases): Add br, brs, brb, brw, brl.
2495 Mon Aug 21 17:33:36 1995 Ian Lance Taylor <ian@cygnus.com>
2497 * m68k-opc.c (m68k_opcode_aliases): Add bhib as an alias for bhis,
2498 and likewise for the other branches. Add bhs as an alias for bcc,
2499 and likewise for the size variants. Add dbhs as an alias for
2502 Fri Aug 11 13:40:24 1995 Jeff Law (law@snake.cs.utah.edu)
2504 * sh-opc.h (FP sts instructions): Update to match reality.
2506 Mon Aug 7 16:12:58 1995 Ian Lance Taylor <ian@cygnus.com>
2508 * m68k-dis.c: (fpcr_names): Add % before all register names.
2509 (reg_names): Likewise.
2510 (print_insn_arg): Don't explicitly print % before register names.
2511 Add % before register names in static array names. In case 'r',
2512 print data registers as `@(Dn)', not `Dn@'. When printing a
2513 memory address, don't print @# before it.
2514 (print_indexed): Change base_disp and outer_disp from int to
2515 bfd_vma. Print using MIT syntax, not mutant invalid Motorola
2516 syntax. Sign extend 8 byte displacement correctly.
2517 (print_base): Print using MIT syntax. Print zpc when appropriate.
2518 Change parameter disp from int to bfd_vma.
2520 * m68k-opc.c (m68k_opcode_aliases): Add jsrl and jsrs as aliases
2523 Mon Aug 7 02:21:40 1995 Jeff Law (law@snake.cs.utah.edu)
2525 * sh-dis.c (print_insn_shx): Handle new operand types F_REG_N,
2526 F_REG_M, FPSCR_M, FPSCR_N, FPUL_M and FPUL_N.
2527 * sh-opc.h (sh_arg_type): Add new operand types.
2528 (sh_table): Add new opcodes from SH3E Floating Point ISA.
2530 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
2532 * Makefile.in (distclean): Remove generated file config.h.
2534 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
2536 * Makefile.in (distclean): Remove generated file config.h.
2538 Wed Aug 2 18:33:40 1995 Ian Lance Taylor <ian@cygnus.com>
2540 * m68k-opc.c: New file, holding tables from include/opcode/m68k.h.
2542 * m68k-dis.c: Remove BREAK_UP_BIG_DECL stuff.
2544 (print_insn_m68k): Change d to be const. Use m68k_numopcodes
2545 rather than numopcodes. Use m68k_opcodes rather than removed
2546 opcode function. Don't check F_ALIAS.
2547 (print_insn_arg): Change first parameter to be const char *.
2548 * Makefile.in (ALL_MACHINES): Add m68k-opc.o.
2549 (m68k-opc.o): New target.
2550 * configure.in: Build m68k-opc.o for bfd_m68k_arch.
2551 * configure: Rebuild.
2553 Wed Aug 2 08:23:38 1995 Doug Evans <dje@canuck.cygnus.com>
2555 * sparc-dis.c (HASH_SIZE, HASH_INSN): Define.
2556 (opcode_bits, opcode_hash_table): New variables.
2557 (opcodes_initialized): Renamed from opcodes_sorted.
2558 (build_hash_table): New function.
2559 (is_delayed_branch): Use hash table.
2560 (print_insn): Renamed from print_insn_sparc, made static.
2561 Build and use hash table. If !sparc64, ignore sparc64 insns,
2562 and vice-versa if sparc64.
2563 (print_insn_sparc, print_insn_sparc64): New functions.
2564 (compare_opcodes): Move sparc64 opcodes to end.
2565 Print commutative insns with constant second.
2566 * sparc-opc.c (all non-v9 insns): Use flag F_NOTV9 instead of F_ALIAS.
2568 Tue Aug 1 00:12:49 1995 Ian Lance Taylor <ian@cygnus.com>
2570 * sh-dis.c (print_insn_shx): Remove unused local dslot. Use
2571 print_address_func for A_BDISP12 and A_BDISP8. Correct test which
2572 avoids printing a delay slot in a delay slot.
2573 * sh-opc.h (sh_table): Fully bracket last entry.
2575 Mon Jul 31 12:04:47 1995 Doug Evans <dje@canuck.cygnus.com>
2577 * sparc-opc.c (sllx, srax, srlx): Fix disassembly.
2579 Wed Jul 12 00:59:34 1995 Ken Raeburn <raeburn@kr-pc.cygnus.com>
2581 * configure.in: Get host_makefile_frag from ${srcdir}.
2583 * configure.in: Autoconfiscated. Check for string[s].h. Create
2584 config.h from config.in. Don't set up sysdep.h link.
2585 * sysdep.h: New file.
2586 * configure, config.in: New files, generated from configure.in.
2587 * Makefile.in: Updated to be processed autoconf-style.
2588 (distclean): Keep sysdep.h. Remove config.log and config.cache.
2589 (Makefile): Depend on config.status.
2590 (config.status): New rule.
2591 * configure.bat: Update Makefile substitutions.
2593 Tue Jul 11 14:23:37 1995 Jeff Spiegel <jeffs@lsil.com>
2595 * mips-opc.c (L1): Define.
2596 (mips_opcodes): Add R4010 instructions: flushi, flushd, flushid,
2597 addciu, madd, maddu, ffc, ffs, msub, msubu, selsi, selsr, waiti,
2600 Tue Jul 11 11:49:49 1995 Ian Lance Taylor <ian@cygnus.com>
2602 * mips-opc.c (mips_opcodes): For the move pseudo-op, prefer daddu
2603 if ISA 3 and addu otherwise, replacing or, since some MIPS chips
2604 have multiple add units but only a single logical unit.
2606 * ppc-opc.c (powerpc_operands): Change CR to use a bitsize of 3,
2607 shifted by 18, without any insertion or extraction function.
2608 (insert_cr, extract_cr): Remove.
2610 Wed Jun 21 20:05:39 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
2612 * m68k-dis.c (print_insn_arg, print_indexed): Print "%" before
2615 Thu Jun 15 17:23:31 1995 Stan Shebs <shebs@andros.cygnus.com>
2617 * mpw-config.in: Add sh and i386 configs, remove sparc config.
2618 * sh-opc.h: Add copyright.
2620 Mon Jun 5 03:30:43 1995 Ken Raeburn <raeburn@kr-laptop.cygnus.com>
2622 * Makefile.in (crunch-m68k): Delete extra target accidentally
2623 checked in a while ago.
2625 Wed May 24 16:22:13 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2627 * sh-opc.h (sh_table): Add SH3 support.
2629 Wed May 24 14:16:08 1995 Steve Chamberlain <sac@slash.cygnus.com>
2631 * sh-opc.h: Added bsrf and braf.
2633 Wed May 10 14:28:16 1995 Richard Earnshaw (rearnsha@armltd.co.uk)
2635 * arm-opc.h (arm_opcodes): Add 64-bit multiply patterns. Delete
2636 bogus [ls]fm{ea,fd} patterns.
2638 * arm-opc.h (arm_opcodes): Correct typos in stm, ldm, std, and ldc.
2639 * arm-dis.c (print_insn_arm): Make GIVEN a parameter, don't try and
2640 initialize it from memory. Make function static.
2641 (print_insn_{big,little}_arm): New functions.
2642 * disassemble.c (disassembler, case bfd_arch_arm): Disassemble for
2643 the correct endianness.
2645 Mon Apr 24 14:18:05 1995 Jason Molenda (crash@phydeaux.cygnus.com>
2647 * sh-opc.h (sh_nibble_type, sh_arg_type): remove trailing , from
2650 Wed Apr 19 14:07:03 1995 Michael Meissner <meissner@tiktok.cygnus.com>
2652 * m68k-dis.c (opcode): Finish change made by Kung Hsu on April
2653 17th, so that it builds again using GCC as the compiler.
2655 Tue Apr 18 12:14:51 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
2657 * mips-dis.c (print_insn_little_mips): Cast return value from
2658 bfd_getl32 from bfd_vma to unsigned long, because _print_insn_mips
2659 expects an unsigned long, and that might be fewer words of
2660 argument storage (e.g., if bfd_vma is long long on a 32-bit
2662 (print_insn_big_mips): Likewise with bfd_getb32 value.
2663 (_print_insn_mips): Now static.
2665 Mon Apr 17 12:23:28 1995 Kung Hsu <kung@rtl.cygnus.com>
2667 * m68k-dis.c: Take out #define BREAK_UP_BIG_DECL kludge, because
2668 gcc memory hog problem with initializer is fixed.
2670 Mon Apr 10 15:55:01 1995 Stan Shebs <shebs@andros.cygnus.com>
2672 Merge in support for Mac MPW as a host.
2673 (Old change descriptions retained for informational value.)
2675 * mpw-config.in (archname): Compute from the config.
2676 (BFD_MACHINES, ARCHDEFS): Put into mk.tmp.
2678 * mpw-config.in (target_arch): Compute from canonical target.
2679 (m68k, mips, powerpc, sparc): Add architectures.
2680 * mpw-make.in (disassemble.c.o): Add.
2681 (ALL_CFLAGS): Remove special flags (-mc68020 -mc68881 -model far).
2683 * mpw-config.in (BFD_MACHINES): Set to a default value.
2684 * mpw-make.in (BFD_MACHINES): Remove wired-in value.
2686 * mpw-make.in (CSEARCH): Add extra-include to search path.
2688 * mpw-config.in (varargs.h): Don't create.
2689 (sysdep.h): Create using forward-include.
2690 * mpw-make.in (CSEARCH): Add include/mpw to search path.
2692 * mpw-config.in: New file, MPW version of configure.in.
2693 * mpw-make.in: New file, MPW version of Makefile.in.
2695 Fri Mar 31 14:23:38 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
2697 * alpha-dis.c (print_insn_alpha): Put empty statement after
2700 Tue Mar 21 10:51:40 1995 Jeff Law (law@snake.cs.utah.edu)
2702 * hppa-dis.c (sign_extend): Delete, redundant with libhppa.h version.
2703 (low_sign_extend): Likewise.
2704 (get_field): Delete unused function.
2705 (set_field, deposit_14, deposit_21): Likewise.
2707 Fri Mar 17 15:55:53 1995 J.T. Conklin <jtc@rtl.cygnus.com>
2709 * i386-dis.c: Support for more pentium opcodes. From Guy Harris
2712 Tue Mar 14 00:52:57 1995 Ken Raeburn (raeburn@kr-pc.cygnus.com)
2714 Sat Feb 11 17:22:41 1995 Klaus Kaempf (kkaempf@didymus.rmi.de)
2716 * alpha-opc.h (OSF_ASMCODE): define
2717 print pal-code names as defined in App C of the
2718 Alpha Architecture Reference Manual
2720 * alpha-dis.c: cleaned up output
2721 print stylized code forms as defined in App A.4.3 of the
2722 Alpha Architecture Reference Manual
2724 Wed Mar 8 15:21:14 1995 Ian Lance Taylor <ian@cygnus.com>
2726 * mips-opc.c: Add new mips4 instructions. Don't set INSN_RFE for
2728 * mips-dis.c (print_insn_arg): Handle new argument types 'h', 'R',
2731 Wed Mar 8 02:54:05 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
2733 * m68k-dis.c (opcode): New function. Returns address of opcode
2734 table entry given index, even if the opcode table was split to
2735 work around gcc bugs.
2736 (print_insn_m68k): Call opcode instead of referencing m68k_opcodes
2738 (BREAK_UP_BIG_DECL): Make secondary array static and const.
2739 (reg_names): Now const.
2740 (print_insn_arg): Arrays cacheFieldName and names now const.
2741 (print_indexed): Array scales now const.
2743 Tue Mar 7 16:41:21 1995 Ian Lance Taylor <ian@cygnus.com>
2745 * ppc-opc.c: Sort recently added instructions by minor opcode
2746 number within major opcode number.
2748 Mon Mar 6 10:04:36 1995 Jeff Law (law@snake.cs.utah.edu)
2750 * hppa-dis.c: Include libhppa.h.
2752 Fri Feb 24 19:15:36 1995 Ian Lance Taylor <ian@cygnus.com>
2754 * mips-opc.c: Change dli to use M_DLI, and add dla.
2756 Mon Feb 20 23:54:38 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2758 * Makefile.in (ALL_MACHINES): Add w65-dis.o.
2760 Thu Feb 16 17:34:41 1995 Ian Lance Taylor <ian@cygnus.com>
2762 * mips-opc.c: Add r4650 mul instruction.
2764 Wed Feb 15 15:45:20 1995 Ian Lance Taylor <ian@cygnus.com>
2766 * mips-opc.c: Add uld and usd macros for unaligned double load and
2769 Tue Feb 14 13:17:37 1995 Michael Meissner <meissner@tiktok.cygnus.com>
2771 * ppc-opc.c (powerpc_opcodes): Add 403GA opcodes rfci, dccci,
2772 mfdcr, mtdcr, icbt, iccci.
2774 Thu Feb 9 12:28:13 1995 Stan Shebs <shebs@andros.cygnus.com>
2776 * i960-dis.c (struct tabent, struct sparse_tabent): Change the
2777 signed char fields to shorts, more portable.
2779 Wed Feb 8 17:29:29 1995 Stan Shebs <shebs@andros.cygnus.com>
2781 * i960-dis.c (struct tabent, struct sparse_tabent): Declare the
2782 char fields as signed chars, since they may have negative values.
2784 Mon Feb 6 10:52:06 1995 J.T. Conklin <jtc@rtl.cygnus.com>
2786 * i386-dis.c (dis386_twobyte): Add cpuid, From Charles Hannum
2787 (mycroft@netbsd.org).
2789 Mon Jan 30 12:38:00 1995 Ian Lance Taylor <ian@cygnus.com>
2791 From "Logg, Ed" <elogg@ea.com>:
2792 * ppc-opc.c (extract_bdm): Correct parenthezisation.
2793 * ppc-dis.c (print_insn_powerpc): Print .long before unrecognized
2796 Thu Jan 26 18:32:08 1995 Ian Lance Taylor <ian@cygnus.com>
2798 * ppc-opc.c: Changes based on patch from David Edelsohn
2799 <edelsohn@mhpcc.edu>.
2800 (powerpc_operands): Add operands SPRBAT and SPRG. Split TBR out of
2803 (insert_tbr): New static function.
2804 (extract_tbr): New static function.
2805 (XFXFXM_MASK, XFXM): Define.
2806 (XSPRBAT_MASK, XSPRG_MASK): Define.
2807 (powerpc_opcodes): Add instructions to access special registers by
2808 name. Add mtcr and mftbu.
2810 Tue Jan 17 10:56:43 1995 Ian Lance Taylor <ian@sanguine.cygnus.com>
2812 * mips-opc.c (P3): Define.
2813 (mips_opcodes): Add mad and madu.
2815 Sun Jan 15 16:32:59 1995 Steve Chamberlain <sac@splat>
2817 * configure.in: Add W65 support.
2818 * disassemble.c: Likewise.
2819 * w65-opc.h, w65-dis.c: New files.
2821 Wed Dec 28 22:15:33 1994 Steve Chamberlain (sac@jonny.cygnus.com)
2823 * h8300-dis.c (bfd_h8_disassemble): Add support for 2 bit
2826 Tue Dec 20 11:25:12 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2828 * mips-opc.c: Add dli as a synonym for li.
2830 Thu Dec 8 18:23:31 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
2832 * alpha-dis.c (print_insn_alpha): Handle call_pal instruction, and
2833 print something for reserved opcode values, even if it won't
2836 * mips-dis.c (_print_insn_mips): When initializing, shift right
2837 and mask, to avoid sign extension problems on the Alpha.
2839 * m68k-dis.c (print_insn_arg, case 'J'): Handle buscr and pcr
2842 Wed Nov 23 22:34:51 1994 Steve Chamberlain (sac@jonny.cygnus.com)
2844 * sh-opc.h (mov.l gbr): Get direction right.
2845 * sh-dis.c (print_insn_shx): New function.
2846 (print_insn_shl, print_insn_sh): Call print_insn_shx to
2847 print opcodes with right byte order.
2849 Thu Nov 3 19:32:22 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
2851 * ns32k-dis.c (struct ns32k_option): Renamed from struct option,
2852 to avoid conflicts with getopt.
2854 Mon Oct 31 18:48:10 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2856 * hppa-dis.c (print_insn_hppa): Read the instruction using
2857 bfd_getb32, so that it works on a little endian or 64 bit host.
2858 Remove unused local variable op.
2860 Tue Oct 25 17:07:57 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2862 * mips-opc.c: Use or instead of addu for pseudo-op move, since
2863 addu does not work correctly if -mips3.
2865 Wed Oct 19 13:40:16 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2867 * a29k-dis.c (print_special): Add special register names defined
2868 on 29030, 29040 and 29050.
2869 (print_insn): Handle new operand type 'I'.
2871 Wed Oct 12 11:59:55 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2873 * Makefile.in (INSTALL): Use top level install.sh script.
2875 Wed Oct 5 19:16:29 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2877 * sparc-dis.c: Rewrite to use bitfields, rather than a union, so
2878 that it works on a little endian host.
2880 Tue Oct 4 12:14:21 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2882 * configure.in: Use ${config_shell} when running config.bfd.
2884 Wed Sep 21 18:49:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
2886 * mips-opc.c (mips_opcodes): "dabs" is only available with -mips3.
2888 Thu Sep 15 16:30:22 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
2890 * a29k-dis.c (print_insn): Print the opcode.
2892 Wed Sep 14 17:52:14 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
2894 * mips-opc.c (mips_opcodes): Set WR_t for sc and scd.
2896 Sun Sep 11 22:32:17 1994 Jeff Law (law@snake.cs.utah.edu)
2898 * hppa-dis.c (reg_names): Use r26-r23 for arg0-arg3.
2900 Tue Sep 6 11:37:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
2902 * mips-opc.c: Set INSN_STORE_MEMORY flag for all instructions
2903 which store a value into memory.
2905 Sun Sep 04 17:58:10 1994 Richard Earnshaw (rwe@pegasus.esprit.ec.org)
2907 * configure.in, Makefile.in, disassemble.c: Add support for the ARM.
2908 * arm-dis.c, arm-opc.h: New files.
2910 Fri Aug 5 14:00:05 1994 Stan Shebs (shebs@andros.cygnus.com)
2912 * Makefile.in (ns32k-dis.o): Add dependency.
2913 * ns32k-dis.c (print_insn_arg): Declare initialized local as
2914 string, not as array of chars.
2916 Thu Jul 28 18:14:16 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
2918 * sparc-dis.c (print_insn_sparc): Handle new operand type 'x'.
2920 * sparc-opc.c: Added sparclite extended FP operations, and
2921 versions of v9 impdep* instructions permitting specification of
2924 Tue Jul 26 16:36:03 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
2926 * i960-dis.c (reg_names): Now const.
2927 (struct sparse_tabent): New type, copied from array type in mem
2929 (ctrl): Local static array ctrl_tab now const.
2930 (cobr): Local static array cobr_tab now const.
2931 (mem): Local variables reg1, reg2, reg3 now point to const. Local
2932 static variable mem_tab no longer explicitly initialized. Changed
2933 mem_init to const array of struct sparse_tabent.
2934 (reg): Local static variable reg_tab no longer explicitly
2935 initialized. Changed reg_init to const array of struct
2937 (ea): Local static array scale_tab now const.
2939 * i960-dis.c (reg): Added i960JX instructions to reg_init table.
2942 Tue Jul 19 21:00:00 1994 DJ Delorie (dj@ctron.com)
2944 * configure.bat: the disassember needs to be enabled for
2945 "objdump -d" to work in djgpp.
2947 Wed Jul 13 18:01:58 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
2949 * ns32k-dis.c: Deleted all code in "#ifdef GDB".
2950 (invalid_float): Enabled general version, doesn't require running
2951 on ns32k host. Changed to take char* argument, and test for
2952 explicitly specified sizes, instead of using sizeof() on host CPU
2954 (INVALID_FLOAT): Cast first argument.
2955 (opt_u, opt_U, opt_O, opt_C, opt_S, list_P532, list_M532,
2956 list_P032, list_M032): Now const.
2957 (optlist, list_search): Made appropriate arguments now point to
2959 (print_insn_arg): Changed static array of one-character-string
2960 pointers into a static const array of characters; fixed sprintf
2961 statement accordingly.
2963 Sun Jul 10 00:27:47 1994 Ian Dall (dall@hfrd.dsto.gov.au)
2965 * opcodes/ns32k-dis.c: Semi-new file. Had apparently been dropped
2966 from distribution. A ns32k-dis.c from a previous distribution has
2967 been brought up to date and supports the new interface.
2969 * disassemble.c: define ARCH_ns32k and add case bfd_arch_ns32k.
2971 * configure.in: add bfd_ns32k_arch target support.
2973 * Makefile.in: add ns32k-dis.o to ALL_MACHINES.
2974 Add ns32k-dis.c to CFILES. Add dependencies for ns32k-dis.o.
2976 Wed Jun 29 22:10:37 1994 Steve Chamberlain (sac@cygnus.com)
2978 * h8300-dis.c (bfd_h8_disassemble): Get 16bit branch
2981 Tue Jun 28 13:22:06 1994 Stan Shebs (shebs@andros.cygnus.com)
2983 * h8300-dis.c, mips-dis.c: Don't use true and false.
2985 Thu Jun 23 12:53:19 1994 David J. Mackenzie (djm@rtl.cygnus.com)
2987 * configure.in: Change --with-targets to --enable-targets.
2989 Wed Jun 22 13:38:32 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
2991 * mips-dis.c (_print_insn_mips): Build a static hash table mapping
2992 opcodes to the first instruction with that opcode, to speed
2993 disassembly of large files. From ralphc@pyramid.com (Ralph
2996 Tue Jun 7 12:49:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2998 * Makefile.in (mostlyclean): Fix typo (was mostyclean).
3000 Wed May 11 22:32:00 1994 DJ Delorie (dj@ctron.com)
3002 * configure.bat: update to latest makefile.in
3004 Sat May 7 17:13:21 1994 Steve Chamberlain (sac@cygnus.com)
3006 * a29k-dis.c (print_insn): Print 'x' type operand in hex.
3007 * h8300-dis.c (bfd_h8_disassemble): Print 16bit rels correctly.
3008 * sh-dis.c (print_insn_sh): Don't recur endlessly if delay
3009 slot insn is in a delay slot.
3010 * z8k-opc.h: (resflg): Fix patterns.
3011 * h8500-opc.h Fix CR insn patterns.
3013 Fri May 6 14:34:46 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3015 * ppc-opc.c (powerpc_opcodes): Put PowerPC versions of "cmp" and
3016 "cmpl" before POWER versions, so that gas -many uses them.
3018 Thu Apr 28 18:32:36 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
3020 * disassemble.c: New file.
3021 * Makefile.in (OFILES): Add disassemble.o.
3022 (disassemble.o): Provide dependencies; compile with $(ARCHDEFS).
3023 * configure.in: Define ARCHDEFS in Makefile. Code taken from
3024 binutils/configure.in.
3026 * m68k-dis.c (print_insn_m68k): If F_ALIAS flag is set, skip the
3027 opcode being examined.
3029 Thu Apr 21 17:08:40 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3031 * ppc-opc.c (powerpc_operands): Added RAL, RAM and RAS.
3032 (insert_ral, insert_ram, insert_ras): New functions.
3033 (powerpc_opcodes): Use RAL for load with update, RAM for lmw, and
3034 RAS for store with update.
3036 Sat Apr 16 23:41:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3038 * ppc-opc.c (powerpc_opcodes): Correct fcir. From David Edelsohn
3039 (edelsohn@npac.syr.edu).
3041 Wed Apr 6 17:11:45 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3043 * mips-opc.c (mips_opcodes): Correct operands of "nor" with an
3046 Mon Apr 4 16:30:46 1994 Doug Evans (dje@canuck.cygnus.com)
3048 * sparc-opc.c (sparc_opcodes): Fix "rd %fprs,%l0".
3050 Mon Apr 4 13:22:00 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3052 * ppc-opc.c (powerpc_operands): The signedp field has been
3053 removed, so don't initialize it. Set the PPC_OPERAND_SIGNED flag
3054 instead. Add new operand SISIGNOPT.
3055 (powerpc_opcodes): For lis, liu, addis, and cau use SISIGNOPT.
3056 Based on patch from David Edelsohn (edelsohn@npac.syr.edu).
3057 * ppc-dis.c (print_insn_powerpc): Check PPC_OPERAND_SIGNED rather
3060 Wed Mar 30 00:31:49 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3062 * i386-dis.c (struct private): Renamed to dis_private. `private'
3063 is a reserved word for dynix cc.
3065 Mon Mar 28 13:00:15 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3067 * configure.in: Change error message to refer to bfd/config.bfd
3068 rather than bfd/configure.in.
3070 Mon Mar 28 12:28:30 1994 David Edelsohn (edelsohn@npac.syr.edu)
3072 * ppc-opc.c: Define POWER2 as short alias flag.
3073 (powerpc_opcodes): Add POWER/2 opcodes lfq*, stfq*, fcir[z], and
3076 Wed Mar 23 12:23:05 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3078 * i960-dis.c (print_insn_i960): Don't read a second word for
3079 opcodes 0, 1, 2 and 3.
3081 Wed Mar 16 15:37:58 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3083 * configure.in: Don't build m68881-ext.o for bfd_m68k_arch.
3085 Mon Mar 14 14:53:50 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3087 * m68881-ext.c: Removed; no longer used.
3088 * Makefile.in: Changed accordingly.
3090 * m68k-dis.c (ext_format_68881): Don't declare.
3091 (print_insn_m68k): If an instruction uses place 'i', it uses at
3092 least four fixed bytes.
3093 (print_insn_arg): Don't bump p by 2 for case 'I', place 'i'. For
3094 extended float, convert to double using floatformat_to_double, not
3095 ieee_extended_to_double, and fetch the data before converting it.
3097 Tue Mar 8 18:12:25 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3099 * mips-opc.c: It's sqrt.s, not sqrt.w. From
3100 davidj@ICSI.Berkeley.EDU (David Johnson).
3102 Tue Feb 8 16:55:27 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3104 * ppc-opc.c (powerpc_opcodes): The POWER uses bdn[l][a] where the
3105 PowerPC uses bdnz[l][a].
3107 Tue Feb 8 00:32:28 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3109 * dis-buf.c, i386-dis.c: Include sysdep.h.
3111 Mon Feb 7 19:22:23 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3113 * configure.in (bfd_powerpc_arch): Use ppc-dis.o and ppc-opc.o.
3115 * ppc-opc.c (powerpc_opcodes): Mark POWER instructions supported
3116 by Motorola PowerPC 601 with PPC_OPCODE_601.
3117 * ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc):
3118 Disassemble Motorola PowerPC 601 instructions as well as normal
3119 PowerPC instructions.
3121 Sun Feb 6 07:45:17 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
3123 * i960-dis.c (reg, mem): Just use a static array instead of
3126 Sat Feb 5 00:04:02 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
3128 * hppa-dis.c (print_insn_hppa): For '?' and '@' only adjust the
3129 condition name index if this is for a negated condition.
3131 * hppa-dis.c (print_insn_hppa): No space before 'H' operand.
3132 Floating point format for 'H' operand is backwards from normal
3133 case (0 == double, 1 == single). For '4', '6', '7', '9', and '8'
3134 operands (fmpyadd and fmpysub), handle bizarre register
3135 translation correctly for single precision format.
3137 * hppa-dis.c (print_insn_hppa): Do not emit a space after 'F'
3138 or 'I' operands if the next format specifier is 'M' (fcmp
3139 condition completer).
3141 Feb 4 23:38:03 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3143 * ppc-opc.c (powerpc_operands): New operand type MBE to handle a
3144 single number giving a bitmask for the MB and ME fields of an M
3145 form instruction. Change NB to accept 32, and turn it into 0;
3146 also turn 0 into 32 when disassembling. Seperated SH from NB.
3147 (insert_mbe, extract_mbe): New functions.
3148 (insert_nb, extract_nb): New functions.
3149 (SC_MASK): Mask out SA and LK bits.
3150 (powerpc_opcodes): Change "cal" to use RT, D, RA rather than RT,
3151 RA, SI. Change "liu" and "cau" to use UI rather than SI. Mark
3152 "bctr" and "bctrl" as accepted by POWER. Change "rlwimi",
3153 "rlimi", "rlwimi.", "rlimi.", "rlwinm", "rlinm", "rlwinm.",
3154 "rlinm.", "rlmi", "rlmi.", "rlwnm", "rlnm", "rlwnm.", "rlnm." to
3155 use MBE rather than MB. Add "mfmq" and "mtmq" POWER instructions.
3156 (powerpc_macros): Define table of macro definitions.
3157 (powerpc_num_macros): Define.
3159 * ppc-dis.c (print_insn_powerpc): Don't skip optional operands
3160 if PPC_OPERAND_NEXT is set.
3162 Sat Jan 22 23:10:07 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3164 * i960-dis.c (print_insn_i960): Make buffer bfd_byte instead of
3165 char. Retrieve contents using bfd_getl32 instead of shifting.
3167 Fri Jan 21 19:01:39 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3169 * ppc-opc.c: New file. Opcode table for PowerPC, including
3170 opcodes for POWER (RS/6000).
3171 * ppc-dis.c: New file. PowerPC and Power (RS/6000) disassembler.
3172 * Makefile.in (ALL_MACHINES): Add ppc-dis.o and ppc-opc.o.
3173 (CFILES): Add ppc-dis.c.
3174 (ppc-dis.o, ppc-opc.o): New targets.
3175 * configure.in: Build ppc-dis.o and ppc-opc.o for bfd_rs6000_arch.
3177 Mon Jan 17 20:05:49 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
3179 * hppa-dis.c (print_insn_hppa): Handle 'N' in assembler template.
3180 No space before 'u', 'f', or 'N'.
3182 Sun Jan 16 14:20:16 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
3184 * i386-dis.c (print_insn_i386): Add FIXME comment regarding reading
3185 farther than we should.
3187 * i386-dis.c (dis386): Use Yb and Yv for scasb and scasS.
3189 Thu Jan 6 12:38:05 1994 David J. Mackenzie (djm@thepub.cygnus.com)
3191 * sparc-dis.c m68k-dis.c alpha-dis.c a29k-dis.c: Fix comments.
3193 Wed Jan 5 11:56:21 1994 David J. Mackenzie (djm@thepub.cygnus.com)
3195 * i960-dis.c (print_insn_i960): Only read word2 if the instruction
3196 needs it, to prevent reading past the end of a section.
3198 Wed Nov 17 17:20:12 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3200 * mips-opc.h: Use macro for j instruction, to support SVR4 PIC.
3201 Removed t,A case for la; always use t,A(b) case.
3203 Mon Nov 8 12:37:36 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3205 From Ted Lemen <mellon@pepper.ncd.com>
3206 * mips-dis.c (print_insn_arg): Handle 'k'.
3207 * mips-opc.c: Make cache use k, not t.
3209 Sun Nov 7 23:52:34 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3211 * alpha-opc.h, alpha-dis.c (print_insn_alpha): Add
3212 FLOAT_MEMORY_FORMAT_CODE, FLOAT_BRANCH_FORMAT_CODE, correct
3213 FLOAT_FORMAT_CODE to put out floating point register names.
3215 Mon Nov 1 18:17:51 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3217 * mips-opc.c: Use macros for jal variants, to support SVR4 PIC.
3219 Thu Oct 28 17:42:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3221 * a29k-dis.c (print_insn): Use 0x%08x, not 0x%8x.
3223 Wed Oct 27 11:48:01 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3225 * mips-opc.c (dsll, dsra, dsrl): Added '>' cases for shift counts
3226 larger than 32. Moved dsxx32 variants first for disassembler.
3228 Mon Oct 25 11:33:14 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
3230 * z8kgen.c, z8k-opc.h: Add full lda information.
3232 Tue Oct 19 12:39:25 1993 Jeffrey A Law (law@cs.utah.edu)
3234 * hppa-dis.c (print_insn_hppa): Do not emit a space after
3235 movb instructions. Any necessary space will be emitted by
3236 the code to handle nullification completers.
3238 Wed Oct 13 16:19:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3240 * mips-opc.c: Moved l.d down so that it disassembles as ldc1.
3242 Fri Oct 8 02:34:21 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3244 * alpha-opc.h: Add ldl_l, fix typo for ldq_u.
3245 * alpha-dis.c (print_insn_alpha): Add code for PAL_FORMAT_CODE.
3247 Tue Oct 5 17:47:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3249 * mips-opc.c: Correct lwu opcode value (book had it wrong).
3251 Thu Sep 30 11:26:18 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
3253 * z8k-dis.c (FETCH_DATA): get just the right amount of data.
3254 (unpack_instr): Cope with ARG_IMM4M1 type instructions.
3256 Wed Sep 29 16:24:49 1993 K. Richard Pixley (rich@sendai.cygnus.com)
3258 * m88k-dis.c (m88kdis): comment change. Remove space after
3260 (printop): handle new arg types DEC and XREG for m88110.
3262 Tue Sep 28 19:20:16 1993 Jeffrey A Law (law@snake.cs.utah.edu)
3264 * hppa-dis.c (print_insn_hppa): Handle 'z' operand
3265 type for absolute branch addresses. Delete special
3266 "ble" and "be" code in 'W' operand code.
3268 Fri Sep 24 14:08:33 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3270 * mips-opc.c: Set hazard information correctly for branch
3271 likely instructions.
3273 Fri Sep 17 04:41:17 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3275 * alpha-dis.c (print_insn_alpha), alpha-opc.h: Fix bugs, use
3276 info->fprintf_func for printing and info->print_address_func for
3279 Wed Sep 15 12:12:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3281 * mips-opc.c: Set INSN_TRAP for tXX instructions.
3283 Thu Sep 9 10:11:27 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3285 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson):
3286 Corrected second case of "b" for disassembler.
3288 Tue Sep 7 14:25:15 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3290 * mips-dis.c, m88k-dis.c: Don't include libbfd.h. Changed calls
3291 to BFD swapping routines to correspond to BFD name changes.
3293 Thu Sep 2 10:35:25 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3295 * mips-opc.c: Change div machine instruction to be z,s,t rather
3296 than s,t. Change div macro to be d,v,t rather than d,s,t.
3297 Likewise for divu, ddiv, ddivu. Added z,s,t case for drem, dremu,
3298 rem and remu which generates only the corresponding div
3299 instruction. This is for compatibility with the MIPS assembler,
3300 which only generates the simple machine instruction when an
3301 explicit destination of $0 is used.
3302 * mips-dis.c (print_insn_arg): Handle 'z' (always register zero).
3304 Thu Aug 26 17:41:44 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3306 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Set
3307 WR_31 hazard for bal, bgezal, bltzal.
3309 Thu Aug 26 17:20:02 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3311 * hppa-dis.c (print_insn_hppa): Use print function
3312 from within the disassemble_info, not fprintf_filtered.
3314 Wed Aug 25 13:51:40 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3316 * hppa-dis.c (print_insn_hppa): Handle '|' like '>'. (From Jeff
3317 Law, law@cs.utah.edu.)
3319 Mon Aug 23 12:44:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3321 * mips-opc.c ("absu"): Removed.
3324 Fri Aug 20 10:52:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3326 * mips-opc.c: Added r6000 and r4000 instructions and macros.
3327 Changed hazard information to distinguish between memory load
3328 delays and coprocessor load delays.
3330 Wed Aug 18 15:39:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3332 * mips-opc.c: li.d uses "T,L", not "S,F". Added li.s.
3334 Tue Aug 17 09:44:42 1993 David J. Mackenzie (djm@thepub.cygnus.com)
3336 * configure.in: Don't pass cpu to config.bfd.
3338 Tue Aug 17 12:23:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3340 * m88k-dis.c (m88kdis): Make class unsigned.
3342 Thu Aug 12 15:08:18 1993 Ian Lance Taylor (ian@cygnus.com)
3344 * alpha-dis.c (print_insn_alpha): One branch format case was
3345 missing the instruction name.
3347 Wed Aug 11 19:29:39 1993 David J. Mackenzie (djm@thepub.cygnus.com)
3349 * Makefile.in (ALL_MACHINES): Renamed from DIS_LIBS.
3350 Add the arch-specific auxiliary files.
3351 (OFILES): Remove the arch-specific auxiliary files
3352 and use BFD_MACHINES instead of DIS_LIBS.
3353 * configure.in: Set BFD_MACHINES based on --with-targets option.
3355 Thu Aug 12 12:04:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3357 * mips-opc.c: Added lwc1 E,A(b) to go with lwc1 T,A(b). Similarly
3360 Sun Aug 8 15:09:30 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3362 * sparc-opc.c: Change CONST to const to deal with gcc
3363 -Dconst=__const -traditional.
3365 Fri Aug 6 10:58:55 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3367 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Took
3368 coprocessor instructions out of #if 0, and made them use new
3371 Thu Aug 5 17:11:06 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3373 * sparc-dis.c: Include ansidecl.h before opcodes/sparc.h.
3375 Fri Jul 30 18:48:15 1993 John Gilmore (gnu@cygnus.com)
3377 * sparc-opc.c: Add F_JSR, F_UNBR, or F_CONDBR flags to each branch
3378 instruction, for use by the disassembler.
3380 * sparc-dis.c (SEX): Add sign extension macro. Replace many
3381 hand-coded sign extensions that depended on 32-bit host ints.
3382 FIXME, we still depend on big-endian host bitfield ordering.
3383 (sparc_print_insn): Set the insn_info_valid field, and the
3384 other fields that describe the instruction being printed.
3386 Tue Jul 27 17:04:58 1993 Jim Wilson (wilson@sphagnum.cygnus.com)
3388 * sparc-opc.c (call): Accept all 6 addressing modes valid for
3389 `jmp' instead of just one of them.
3391 Wed Jul 21 11:43:32 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
3393 * hppa-dis.c: Move floating registers from reg_names to fp_reg_names.
3394 (fput_fp_reg_r): Renamed from fput_reg_r.
3395 (fput_fp_reg): New function.
3396 (print_insn_hppa): Use fput_fp_reg{,_r} where appropriate.
3398 * hppa-dis.c (print_insn_hppa, cases 'a', 'd'): Print space afterwards.
3400 * hppa-dis.c (print_insn_hppa, case 'd'): Use GET_COND not GET_FIELD.
3402 Mon Jul 19 13:52:21 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
3404 * hppa-dis.c (print_insn_hppa): Use extract_5r_store for 'r'.
3406 * hppa-dis.c (print_insn_hppa, case '>'): If next character is 'n',
3407 don't output a space.
3409 * hppa-dis.c (float_format_names): 10 is undefined, and 11 is quad.
3411 Sun Jul 18 16:30:02 1993 Jim Kingdon (kingdon@rtl.cygnus.com)
3413 * mips-opc.c: New file, containing opcode table from
3414 ../include/opcode/mips.h.
3415 * Makefile.in: Add it.
3417 Thu Jul 15 12:37:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3419 * m88k-dis.c: New file, moved in from gdb and changed to use the
3420 new dis-asm.h disassembler interface.
3421 * Makefile.in (DIS_LIBS): Added m88k-dis.o.
3422 (m88k-dis.o): New target.
3424 Tue Jul 13 10:04:16 1993 Ian Lance Taylor (ian@cygnus.com)
3426 * mips-dis.c (print_insn_arg, _print_insn_mips): Made pointer to
3427 argument string const char * to correspond to opcode/mips.h.
3429 Tue Jul 6 15:18:37 1993 Ian Lance Taylor (ian@cygnus.com)
3431 * mips-dis.c: Updated to account for name changes in new version
3433 * Makefile.in: Added header file dependencies.
3435 Sat Jul 3 23:47:56 1993 Doug Evans (dje@canuck.cygnus.com)
3437 * h8300-dis.c (bfd_h8_disassemble): Correct fetching of instruction.
3439 Thu Jul 1 12:23:38 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3441 * m68k-dis.c (NEXTWORD, NEXTLONG): Use ((x) ^ 0x8000) - 0x8000 to sign
3442 extend, rather than shifts.
3444 Sun Jun 20 20:56:56 1993 Ken Raeburn (raeburn@poseidon.cygnus.com)
3446 * Makefile.in: Undo 15 June change.
3448 Fri Jun 18 14:15:15 1993 Per Bothner (bothner@deneb.cygnus.com)
3450 * m68k-dis.c (print_insn_arg): Change return value to byte count
3452 * m68k-dis.c: Re-write to detect invalid operands before
3453 printing anything, so we can handle this the same way we
3454 handle invalid opcodes.
3456 Thu Jun 17 15:01:36 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
3458 * sh-dis.c, sh-opc.h: Understand some more opcodes.
3460 Wed Jun 16 13:48:05 1993 Ian Lance Taylor (ian@cygnus.com)
3462 * hppa-dis.c: Include <ansidecl.h> and sysdep.h before other
3465 Tue Jun 15 21:45:26 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3467 * sparc-dis.c: Don't declare qsort, since sysdep.h might.
3469 * configure.in: Do make sysdep.h link.
3470 * Makefile.in: Search ../include. Don't search ../bfd.
3472 Tue Jun 15 13:36:10 1993 Stu Grossman (grossman@cygnus.com)
3474 Changes from Jeff Law, law@cs.utah.edu:
3475 * hppa-dis.c: Fix typo. 'a' and 'd' were reversed.
3476 Do not print a space before the completers specified by
3479 Fri Jun 11 18:40:21 1993 Ken Raeburn (raeburn@cygnus.com)
3481 * mips-dis.c: No longer need to bomb out if HOST_64_BIT is
3482 defined, since gdb has been fixed.
3484 Changes from Jeff Law, law@cs.utah.edu:
3485 * hppa-dis.c (print_insn_hppa): Last argument to fput_reg,
3486 fput_reg_r, fput_creg, fput_const, and fputs_filtered should
3487 be a *disassemble_info, not a *FILE.
3488 * hppa-dis.c: Support 'd', '!', and 'a'.
3489 * hppa-dis.c: Support 's' to extract a 2 bit space register.
3490 * hppa-dis.c: Delete cases which are no longer needed.
3492 Fri Jun 11 07:53:48 1993 Jim Kingdon (kingdon@cygnus.com)
3494 * m68k-dis.c (print_insn_{m68k,arg}): Add MMU codes.
3496 Tue Jun 8 12:25:01 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
3498 * h8300-dis.c: New file, removed from bfd/cpu-h8300.c, with
3501 Mon Jun 7 12:58:49 1993 Per Bothner (bothner@rtl.cygnus.com)
3503 * Makefile.in (CSEARCH): Add -I../bfd for sysdep.h and bfd.h.
3504 * configure.in: No longer need to configure to get sysdep.h.
3506 Thu Jun 3 15:56:49 1993 Stu Grossman (grossman@cygnus.com)
3508 * Patches from Jeffrey Law <law@cs.utah.edu>.
3509 * hppa-dis.c: Support 'I', 'J', and 'K' in output
3510 templates for 1.1 FP computational instructions.
3512 Tue May 25 13:05:48 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3514 * h8500-dis.c (print_insn_h8500): Address argument is type
3516 * z8k-dis.c (print_insn_z8k, print_insn_z8001, print_insn_z8002):
3519 * h8500-opc.h (addr_class_type): No comma at end of enumerator.
3520 * sh-opc.h (sh_nibble_type, sh_arg_type): Ditto.
3522 * sparc-dis.c (compare_opcodes): Move static declaration to
3525 Fri May 21 14:17:37 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3527 * sparc-dis.c (print_insn_sparc): Implement 'n' argument for unimp
3528 instruction, remove unimp hack from 'l' argument.
3530 Wed May 19 15:35:54 1993 Stu Grossman (grossman@cygnus.com)
3532 * z8k-dis.c (fetch_data): Use unsigned char to make ancient gcc's
3535 Fri May 14 15:22:46 1993 Ian Lance Taylor (ian@cygnus.com)
3537 * Based on patches from davidj@ICSI.Berkeley.EDU (David Johnson):
3538 * mips-dis.c (print_insn_arg): Handle 'C' for general coprocessor
3541 Fri May 14 00:09:14 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3543 * hppa-dis.c: Include dis-asm.h before sysdep.h. Changed some
3544 arrays of string pointers to 2-d arrays of chars, to save
3547 Thu May 6 20:51:17 1993 Fred Fish (fnf@cygnus.com)
3549 * a29k-dis.c, alpha-dis.c, i960-dis.c, sparc-dis.c, z8k-dis.c:
3550 Cast second arg to read_memory_func to "bfd_byte *", as necessary.
3552 Tue May 4 20:31:10 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3554 * hppa-dis.c: New file from Utah, adapted to new disassembler
3556 * Makefile.in: Include it.
3558 Mon Apr 26 18:17:42 1993 Steve Chamberlain (sac@thepub.cygnus.com)
3560 * sh-dis.c, sh-opc.h: New files.
3562 Fri Apr 23 18:51:22 1993 Steve Chamberlain (sac@thepub.cygnus.com)
3564 * alpha-dis.c, alpha-opc.h: New files.
3566 Tue Apr 6 12:54:08 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3568 * mips-dis.c: Sign extend 'j' and 'b' arguments, delta is a signed
3571 Mon Apr 5 17:37:37 1993 John Gilmore (gnu@cygnus.com)
3573 * sparc-dis.c: Make "ta" the default trap instruction, "t" the alias.
3575 Fri Apr 2 07:24:27 1993 Ian Lance Taylor (ian@cygnus.com)
3577 * a29k-dis.c, sparc-dis.c, sparc-opc.c: Use CONST rather than
3580 Thu Apr 1 11:20:43 1993 Jim Kingdon (kingdon@cygnus.com)
3582 * sparc-dis.c: Use fprintf_func a few places where I forgot,
3583 and double percent signs a few places.
3585 * a29k-dis.c, i960-dis.c: New, merged from gdb and binutils.
3587 * i386-dis.c, m68k-dis.c, mips-dis.c, sparc-dis.c:
3588 Use info->print_address_func not print_address.
3590 * dis-buf.c (generic_print_address): New function.
3592 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3594 * Makefile.in: Add sparc-dis.c.
3595 sparc-dis.c: New file, merges binutils and gdb versions as follows:
3597 Add `add' instruction to the set that get checked
3598 for a preceding `sethi' in order to print an absolute address.
3599 * (print_insn): Disassembly prefers real instructions.
3600 (is_delayed_branch): Speed up.
3601 * sparc-opcode.h: Add ALIAS bit to aliases. Fix up opcode tables.
3602 Still missing some float ops, and needs testing.
3603 * sparc-pinsn.c (print_insn): Eliminate 'set' test, subsumed by
3604 F_ALIAS. Use printf, not fprintf, when not passing a file
3606 (compare_opcodes): Check that identical instructions have
3607 identical opcodes, complain otherwise.
3610 * Include reg_names.
3612 Use dis-asm.h/read_memory_func interface.
3614 Wed Mar 31 20:49:06 1993 K. Richard Pixley (rich@rtl.cygnus.com)
3616 * h8500-dis.c, i386-dis.c, m68k-dis.c, z8k-dis.c (fetch_data):
3617 deliberately return non-zero to setjmp from longjmp. Otherwise
3618 this code fails to compile.
3620 Wed Mar 31 17:04:31 1993 Stu Grossman (grossman@cygnus.com)
3622 * m68k-dis.c: Fix prototype for fetch_arg().
3624 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3626 * dis-buf.c: New file, for new read_memory_func interface.
3627 Makefile.in (OFILES): Include it.
3628 m68k-dis.c, i386-dis.c, h8500-dis.c, mips-dis.c, z8k-dis.c:
3629 Use new read_memory_func interface.
3631 Mon Mar 29 14:02:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
3633 * h8500-dis.c (print_insn_h8500): Get sign of fp offsets right.
3634 * h8500-opc.h: Fix couple of opcodes.
3636 Wed Mar 24 02:03:36 1993 david d `zoo' zuhn (zoo at poseidon.cygnus.com)
3638 * Makefile.in: add dvi & installcheck targets
3640 Mon Mar 22 18:55:04 1993 John Gilmore (gnu@cygnus.com)
3642 * Makefile.in: Update for h8500-dis.c.
3644 Fri Mar 19 14:27:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
3646 * h8500-dis.c, h8500-opc.h: New files
3648 Thu Mar 18 14:12:37 1993 Per Bothner (bothner@rtl.cygnus.com)
3650 * mips-dis.c, z8k-dis.c: Converted to use interface defined in
3651 ../include/dis-asm.h.
3652 * m68k-dis.c: New file (merge of ../binutils/m68k-pinsn.c
3653 and ../gdb/m68k-pinsn.c).
3654 * i386-dis.c: New file (merge of ../binutils/i386-pinsn.c
3655 and ../gdb/i386-pinsn.c).
3656 * m68881-ext.c: New file. Moved definition of
3657 ext_format ext_format_68881 from ../gdb/m68k-tdep.c.
3658 * Makefile.in: Adjust for new files.
3659 * i386-dis.c: Patches from John Hassey (hassey@dg-rtp.dg.com).
3660 * m68k-dis.c: Recognize '9' placement code, so (say) pflush
3661 can be dis-assembled.
3663 Wed Feb 17 09:19:47 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3665 * mips-dis.c (print_insn_arg): Now returns void.
3667 Mon Jan 11 16:09:16 1993 Fred Fish (fnf@cygnus.com)
3669 * mips-dis.c (ansidecl.h): Include for benefit of sysdep.h
3670 files that use the macros.
3672 Thu Jan 7 13:15:17 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3674 * mips-dis.c: New file, from gdb/mips-pinsn.c.
3675 * Makefile.in (DIS_LIBS): Added mips-dis.o.
3676 (CFILES): Added mips-dis.c.
3678 Thu Jan 7 07:36:33 1993 Steve Chamberlain (sac@thepub.cygnus.com)
3680 * z8k-dis.c (print_insn_z8001, print_insn_z8002): new routines
3681 * z8kgen.c, z8k-opc.h: fix sizes of some shifts.
3683 Tue Dec 22 15:42:44 1992 Per Bothner (bothner@rtl.cygnus.com)
3685 * Makefile.in: Improve *clean rules.
3686 * configure.in: Allow a default host.
3688 Tue Nov 17 19:53:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
3690 * Makefile.in: also use -I$(srcdir)/../bfd, since some sysdep
3691 files include other sysdep files
3693 Thu Nov 12 16:10:37 1992 Steve Chamberlain (sac@thepub.cygnus.com)
3695 * z8k-dis.c z8k-opc.h z8kgen.c: checkpoint
3697 Fri Oct 9 04:56:05 1992 John Gilmore (gnu@cygnus.com)
3699 * configure.in: For host support, use ../bfd/configure.host
3700 so it stays in sync with the ../bfd/hosts database.
3702 Thu Oct 1 23:38:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
3704 * configure.in: use cpu-vendor-os triple instead of nested cases
3706 Wed Sep 30 16:09:20 1992 Michael Werner (mtw@cygnus.com)
3708 * z8k-dis.c (unparse_instr): fix bug where opcode returned was
3709 *always* the wrong one.
3711 Wed Sep 30 07:42:17 1992 Steve Chamberlain (sac@thepub.cygnus.com)
3713 * z8kgen.c: added copyright info
3715 Tue Sep 29 12:20:21 1992 Steve Chamberlain (sac@thepub.cygnus.com)
3717 * z8k-dis.c (unparse_instr): prettier tabs
3718 * z8kgen.c -> z8k-opc.h: bug fixes in tables
3720 Fri Sep 25 12:50:32 1992 Stu Grossman (grossman at cygnus.com)
3722 * configure.in: Add ncr* configuration.
3723 * z8k-dis.c (struct instr_data_s): Make instr_asmsrc char to make
3724 picayune ANSI compilers happy.
3726 Sep 20 08:50:55 1992 Fred Fish (fnf@cygnus.com)
3728 * configure.in (i386): Make i386 and i486 synonymous for now.
3729 * configure.in (i[34]86-*-sysv4): Add my_host definition.
3731 Fri Sep 18 17:01:23 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
3733 * Makefile.in (install): Fix typo.
3735 Fri Sep 18 02:04:24 1992 John Gilmore (gnu@cygnus.com)
3737 * Makefile.in (make): Remove obsolete crud.
3738 (sparc-opc.o): Avoid Sun Make VPATH bug.
3740 Tue Sep 8 17:29:27 1992 K. Richard Pixley (rich@sendai.cygnus.com)
3742 * Makefile.in: since there are no SUBDIRS, remove rule and
3743 references of subdir_do.
3745 Tue Sep 8 17:02:58 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
3747 * Makefile.in (install): Get the library name right here too.
3748 Don't install bfd.h, since it's unrelated to this library. No
3749 subdirs to recurse into, either.
3750 (CFILES): The source file has a .c suffix, not .o.
3752 * sparc-opc.c: New file, moved from BFD.
3753 * Makefile.in (OFILES): Build it.
3755 Thu Sep 3 16:59:20 1992 Michael Werner (mtw@cygnus.com)
3757 * z8k-dis.c: fixed forward refferences of some declarations.
3759 Mon Aug 31 16:09:45 1992 Michael Werner (mtw@cygnus.com)
3761 * Makefile.in: get the name of the library right
3763 Mon Aug 31 13:47:35 1992 Steve Chamberlain (sac@thepub.cygnus.com)
3765 * z8k-dis.c: knows how to disassemble z8k stuff
3766 * z8k-opc.h: new file full of z8000 opcodes
3770 version-control: never
projects / deliverable / binutils-gdb.git / blob