2 Wed Aug 30 11:11:58 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4 * sh-opc.h: Add blank lines to improve readabililty of sh3e
8 Wed Aug 30 11:09:38 1995 Jim Wilson <wilson@chestnut.cygnus.com>
10 * sh-dis.c: Correct comment on first line of file.
12 Tue Aug 29 15:37:18 1995 Doug Evans <dje@canuck.cygnus.com>
14 * disassemble.c (disassembler): Handle bfd_mach_sparc64.
16 * sparc-opc.c (asi, membar): New static locals.
17 (sparc_{encode,decode}_{asi,membar}): New functions.
18 (sparc_opcodes, membar insn): Fix.
19 * sparc-dis.c (print_insn): Call sparc_decode_asi.
20 Support decoding of membar masks.
23 Sat Aug 26 21:22:48 1995 Ian Lance Taylor <ian@cygnus.com>
25 * m68k-opc.c (m68k_opcode_aliases): Add br, brs, brb, brw, brl.
27 Mon Aug 21 17:33:36 1995 Ian Lance Taylor <ian@cygnus.com>
29 * m68k-opc.c (m68k_opcode_aliases): Add bhib as an alias for bhis,
30 and likewise for the other branches. Add bhs as an alias for bcc,
31 and likewise for the size variants. Add dbhs as an alias for
35 Fri Aug 11 13:40:24 1995 Jeff Law (law@snake.cs.utah.edu)
37 * sh-opc.h (FP sts instructions): Update to match reality.
40 Mon Aug 7 16:12:58 1995 Ian Lance Taylor <ian@cygnus.com>
42 * m68k-dis.c: (fpcr_names): Add % before all register names.
43 (reg_names): Likewise.
44 (print_insn_arg): Don't explicitly print % before register names.
45 Add % before register names in static array names. In case 'r',
46 print data registers as `@(Dn)', not `Dn@'. When printing a
47 memory address, don't print @# before it.
48 (print_indexed): Change base_disp and outer_disp from int to
49 bfd_vma. Print using MIT syntax, not mutant invalid Motorola
50 syntax. Sign extend 8 byte displacement correctly.
51 (print_base): Print using MIT syntax. Print zpc when appropriate.
52 Change parameter disp from int to bfd_vma.
54 * m68k-opc.c (m68k_opcode_aliases): Add jsrl and jsrs as aliases
58 Mon Aug 7 02:21:40 1995 Jeff Law (law@snake.cs.utah.edu)
60 * sh-dis.c (print_insn_shx): Handle new operand types F_REG_N,
61 F_REG_M, FPSCR_M, FPSCR_N, FPUL_M and FPUL_N.
62 * sh-opc.h (sh_arg_type): Add new operand types.
63 (sh_table): Add new opcodes from SH3E Floating Point ISA.
66 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
68 * Makefile.in (distclean): Remove generated file config.h.
70 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
72 * Makefile.in (distclean): Remove generated file config.h.
74 Wed Aug 2 18:33:40 1995 Ian Lance Taylor <ian@cygnus.com>
76 * m68k-opc.c: New file, holding tables from include/opcode/m68k.h.
78 * m68k-dis.c: Remove BREAK_UP_BIG_DECL stuff.
80 (print_insn_m68k): Change d to be const. Use m68k_numopcodes
81 rather than numopcodes. Use m68k_opcodes rather than removed
82 opcode function. Don't check F_ALIAS.
83 (print_insn_arg): Change first parameter to be const char *.
84 * Makefile.in (ALL_MACHINES): Add m68k-opc.o.
85 (m68k-opc.o): New target.
86 * configure.in: Build m68k-opc.o for bfd_m68k_arch.
89 Wed Aug 2 08:23:38 1995 Doug Evans <dje@canuck.cygnus.com>
91 * sparc-dis.c (HASH_SIZE, HASH_INSN): Define.
92 (opcode_bits, opcode_hash_table): New variables.
93 (opcodes_initialized): Renamed from opcodes_sorted.
94 (build_hash_table): New function.
95 (is_delayed_branch): Use hash table.
96 (print_insn): Renamed from print_insn_sparc, made static.
97 Build and use hash table. If !sparc64, ignore sparc64 insns,
98 and vice-versa if sparc64.
99 (print_insn_sparc, print_insn_sparc64): New functions.
100 (compare_opcodes): Move sparc64 opcodes to end.
101 Print commutative insns with constant second.
102 * sparc-opc.c (all non-v9 insns): Use flag F_NOTV9 instead of F_ALIAS.
104 Tue Aug 1 00:12:49 1995 Ian Lance Taylor <ian@cygnus.com>
106 * sh-dis.c (print_insn_shx): Remove unused local dslot. Use
107 print_address_func for A_BDISP12 and A_BDISP8. Correct test which
108 avoids printing a delay slot in a delay slot.
109 * sh-opc.h (sh_table): Fully bracket last entry.
111 Mon Jul 31 12:04:47 1995 Doug Evans <dje@canuck.cygnus.com>
113 * sparc-opc.c (sllx, srax, srlx): Fix disassembly.
115 Wed Jul 12 00:59:34 1995 Ken Raeburn <raeburn@kr-pc.cygnus.com>
117 * configure.in: Get host_makefile_frag from ${srcdir}.
119 * configure.in: Autoconfiscated. Check for string[s].h. Create
120 config.h from config.in. Don't set up sysdep.h link.
121 * sysdep.h: New file.
122 * configure, config.in: New files, generated from configure.in.
123 * Makefile.in: Updated to be processed autoconf-style.
124 (distclean): Keep sysdep.h. Remove config.log and config.cache.
125 (Makefile): Depend on config.status.
126 (config.status): New rule.
127 * configure.bat: Update Makefile substitutions.
129 Tue Jul 11 14:23:37 1995 Jeff Spiegel <jeffs@lsil.com>
131 * mips-opc.c (L1): Define.
132 (mips_opcodes): Add R4010 instructions: flushi, flushd, flushid,
133 addciu, madd, maddu, ffc, ffs, msub, msubu, selsi, selsr, waiti,
136 Tue Jul 11 11:49:49 1995 Ian Lance Taylor <ian@cygnus.com>
138 * mips-opc.c (mips_opcodes): For the move pseudo-op, prefer daddu
139 if ISA 3 and addu otherwise, replacing or, since some MIPS chips
140 have multiple add units but only a single logical unit.
142 * ppc-opc.c (powerpc_operands): Change CR to use a bitsize of 3,
143 shifted by 18, without any insertion or extraction function.
144 (insert_cr, extract_cr): Remove.
147 Mon Jul 3 11:54:31 1995 Ian Lance Taylor <ian@cygnus.com>
149 * Makefile.in (ALL_MACHINES): Add arc-dis.o and arc-opc.o.
152 Wed Jun 21 20:05:39 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
154 * m68k-dis.c (print_insn_arg, print_indexed): Print "%" before
157 Thu Jun 15 17:23:31 1995 Stan Shebs <shebs@andros.cygnus.com>
159 * mpw-config.in: Add sh and i386 configs, remove sparc config.
160 * sh-opc.h: Add copyright.
162 Mon Jun 5 03:30:43 1995 Ken Raeburn <raeburn@kr-laptop.cygnus.com>
164 * Makefile.in (crunch-m68k): Delete extra target accidentally
165 checked in a while ago.
167 Wed May 24 16:22:13 1995 Jim Wilson <wilson@chestnut.cygnus.com>
169 * sh-opc.h (sh_table): Add SH3 support.
171 Wed May 24 14:16:08 1995 Steve Chamberlain <sac@slash.cygnus.com>
173 * sh-opc.h: Added bsrf and braf.
175 Wed May 10 14:28:16 1995 Richard Earnshaw (rearnsha@armltd.co.uk)
177 * arm-opc.h (arm_opcodes): Add 64-bit multiply patterns. Delete
178 bogus [ls]fm{ea,fd} patterns.
180 * arm-opc.h (arm_opcodes): Correct typos in stm, ldm, std, and ldc.
181 * arm-dis.c (print_insn_arm): Make GIVEN a parameter, don't try and
182 initialize it from memory. Make function static.
183 (print_insn_{big,little}_arm): New functions.
184 * disassemble.c (disassembler, case bfd_arch_arm): Disassemble for
185 the correct endianness.
188 Sat Apr 29 23:20:05 1995 Doug Evans <dje@chestnut.cygnus.com>
190 * arc-opc.c (arc_opcodes): Add ARC_OPCODE_CONDITIONAL_BRANCH flag.
191 (arc_suffixes): Use ARC_DELAY_{NONE,NORMAL,JUMP}.
194 Mon Apr 24 14:18:05 1995 Jason Molenda (crash@phydeaux.cygnus.com>
196 * sh-opc.h (sh_nibble_type, sh_arg_type): remove trailing , from
199 Wed Apr 19 14:07:03 1995 Michael Meissner <meissner@tiktok.cygnus.com>
201 * m68k-dis.c (opcode): Finish change made by Kung Hsu on April
202 17th, so that it builds again using GCC as the compiler.
204 Tue Apr 18 12:14:51 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
206 * mips-dis.c (print_insn_little_mips): Cast return value from
207 bfd_getl32 from bfd_vma to unsigned long, because _print_insn_mips
208 expects an unsigned long, and that might be fewer words of
209 argument storage (e.g., if bfd_vma is long long on a 32-bit
211 (print_insn_big_mips): Likewise with bfd_getb32 value.
212 (_print_insn_mips): Now static.
214 Mon Apr 17 12:23:28 1995 Kung Hsu <kung@rtl.cygnus.com>
216 * m68k-dis.c: Take out #define BREAK_UP_BIG_DECL kludge, because
217 gcc memory hog problem with initializer is fixed.
220 Wed Apr 12 09:04:12 1995 Doug Evans <dje@canuck.cygnus.com>
222 * arc-opc.c (NULL): Define.
223 (arc_operands, insn fields u,s): Delete.
224 (arc_operands, insn fields a,b,c): Mark as signed.
225 (arc_opcodes): No longer const, links computed at run-time.
226 (arc_opcodes, mac/mul insns): Breakout suffixes as we don't handle
227 suffixes that affect the insn code.
228 (arc_opcodes): Resort table to macros are first.
229 (arc_opcodes, ld [b,c] entry): Add %Q to prevent shimms.
230 (arc_opcodes, st [b] entry): Likewise.
231 (arc_opcodes, st [b,d] entry): Fix mask, value.
232 (arc_reg_names): Add entries for r29, r30, r31, r60.
233 (opcode_map, icode_map): New static globals.
234 (arc_opcode_init_tables): Initialize them.
235 (arc_opcode_lookup_asm, arc_opcode_lookup_dis): New functions.
236 (insert_shimmoffset): Signal error if register present.
238 * arc-dis.c (print_insn): Call arc_opcode_lookup_dis.
241 Mon Apr 10 15:55:01 1995 Stan Shebs <shebs@andros.cygnus.com>
243 Merge in support for Mac MPW as a host.
244 (Old change descriptions retained for informational value.)
246 * mpw-config.in (archname): Compute from the config.
247 (BFD_MACHINES, ARCHDEFS): Put into mk.tmp.
249 * mpw-config.in (target_arch): Compute from canonical target.
250 (m68k, mips, powerpc, sparc): Add architectures.
251 * mpw-make.in (disassemble.c.o): Add.
252 (ALL_CFLAGS): Remove special flags (-mc68020 -mc68881 -model far).
254 * mpw-config.in (BFD_MACHINES): Set to a default value.
255 * mpw-make.in (BFD_MACHINES): Remove wired-in value.
257 * mpw-make.in (CSEARCH): Add extra-include to search path.
259 * mpw-config.in (varargs.h): Don't create.
260 (sysdep.h): Create using forward-include.
261 * mpw-make.in (CSEARCH): Add include/mpw to search path.
263 * mpw-config.in: New file, MPW version of configure.in.
264 * mpw-make.in: New file, MPW version of Makefile.in.
267 Thu Apr 6 20:36:08 1995 Doug Evans <dje@chestnut.cygnus.com>
269 * arc-dis.c (print_insn): New parameter `big_p'. Callers updated.
270 Call arc_get_opcode_mach to map bfd mach number to opcode value.
271 (print_insn_*): Pass bfd mach number, not opcode version.
272 * arc-opc.c (arc_get_opcode_mach): New function.
275 Fri Mar 31 14:23:38 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
277 * alpha-dis.c (print_insn_alpha): Put empty statement after
280 Tue Mar 21 10:51:40 1995 Jeff Law (law@snake.cs.utah.edu)
282 * hppa-dis.c (sign_extend): Delete, redundant with libhppa.h version.
283 (low_sign_extend): Likewise.
284 (get_field): Delete unused function.
285 (set_field, deposit_14, deposit_21): Likewise.
287 Fri Mar 17 15:55:53 1995 J.T. Conklin <jtc@rtl.cygnus.com>
289 * i386-dis.c: Support for more pentium opcodes. From Guy Harris
292 Tue Mar 14 00:52:57 1995 Ken Raeburn (raeburn@kr-pc.cygnus.com)
294 Sat Feb 11 17:22:41 1995 Klaus Kaempf (kkaempf@didymus.rmi.de)
296 * alpha-opc.h (OSF_ASMCODE): define
297 print pal-code names as defined in App C of the
298 Alpha Architecture Reference Manual
300 * alpha-dis.c: cleaned up output
301 print stylized code forms as defined in App A.4.3 of the
302 Alpha Architecture Reference Manual
304 Wed Mar 8 15:21:14 1995 Ian Lance Taylor <ian@cygnus.com>
306 * mips-opc.c: Add new mips4 instructions. Don't set INSN_RFE for
308 * mips-dis.c (print_insn_arg): Handle new argument types 'h', 'R',
311 Wed Mar 8 02:54:05 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
313 * m68k-dis.c (opcode): New function. Returns address of opcode
314 table entry given index, even if the opcode table was split to
315 work around gcc bugs.
316 (print_insn_m68k): Call opcode instead of referencing m68k_opcodes
318 (BREAK_UP_BIG_DECL): Make secondary array static and const.
319 (reg_names): Now const.
320 (print_insn_arg): Arrays cacheFieldName and names now const.
321 (print_indexed): Array scales now const.
324 Tue Mar 7 21:14:14 1995 Doug Evans <dje@chestnut.cygnus.com>
326 * arc-dis.c (print_insn_arc_base): Split into big and little fns.
327 (print_insn_arc_{host,graphics,audio}): Likewise.
328 (print_insn): Add prototype.
329 (arc_get_disassembler): New arg `big_p'. Return little or big
330 print fn accordingly.
331 * arc-opc.c (arc_opcode_init_tables): Init arc_operand_map once.
332 (arc_opcode_supported): Use ARC_OPCODE_CPU to ignore byte order.
333 (arc_opval_supported): Likewise.
334 * disassemble.c (disassembler): Pass big endian flag to
335 arc_get_disassembler.
338 Tue Mar 7 16:41:21 1995 Ian Lance Taylor <ian@cygnus.com>
340 * ppc-opc.c: Sort recently added instructions by minor opcode
341 number within major opcode number.
343 Mon Mar 6 10:04:36 1995 Jeff Law (law@snake.cs.utah.edu)
345 * hppa-dis.c: Include libhppa.h.
347 Fri Feb 24 19:15:36 1995 Ian Lance Taylor <ian@cygnus.com>
349 * mips-opc.c: Change dli to use M_DLI, and add dla.
351 Mon Feb 20 23:54:38 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
353 * Makefile.in (ALL_MACHINES): Add w65-dis.o.
356 Fri Feb 17 12:42:25 1995 Doug Evans <dje@chestnut.cygnus.com>
358 * arc-dis.c (arc_get_disassembler): Change argument to int,
359 one of bfd_mach_arc_xxx. All callers updated.
362 Thu Feb 16 17:34:41 1995 Ian Lance Taylor <ian@cygnus.com>
364 * mips-opc.c: Add r4650 mul instruction.
366 Wed Feb 15 15:45:20 1995 Ian Lance Taylor <ian@cygnus.com>
368 * mips-opc.c: Add uld and usd macros for unaligned double load and
371 Tue Feb 14 13:17:37 1995 Michael Meissner <meissner@tiktok.cygnus.com>
373 * ppc-opc.c (powerpc_opcodes): Add 403GA opcodes rfci, dccci,
374 mfdcr, mtdcr, icbt, iccci.
377 Mon Feb 13 11:09:17 1995 Doug Evans <dje@canuck.cygnus.com>
379 * arc-dis.c (print_insn): Handle ARC_OPERAND_ADDRESS.
380 * arc-opc.c (arc_operands): New operand 'J' for jump addresses.
381 ('L' operand): Mark as ARC_OPERAND_ADDRESS.
382 (arc_opcodes, j insn): Use 'J' operand type, not 'L'.
383 (arc_opcodes, ld/st insns): Fix address writeback operand letter.
384 (insert_absaddr): New function.
386 Thu Feb 9 19:19:23 1995 Doug Evans <dje@canuck.cygnus.com>
388 * arc-dis.c (print_insn_arc): Rename to print_insn and make static.
389 New argument `cpu', pass it to arc_opcode_init_tables.
390 Document byte order dependencies. Ignore unsupported insns.
391 (arc_get_disassembler): New function.
392 (print_insn_arc_base, print_insn_arc_host, print_insn_arc_graphics,
393 print_insn_arc_audio): New functions.
394 * arc-opc.c (MULTSHIFT operand): Delete.
395 (UNSIGNED, SATURATION): New operands.
396 (mac, mul, mul64, mulu64): New insns.
397 (ext. asl, asr, lsr, ror): Only available on host and graphics cpus.
398 (padc, padd, pmov, pand, psbc, psub, swap): New insns.
399 (host,graphics,audio extended and auxiliary regs): Define.
400 (ss, sc, mh, ml): New suffixes.
401 (arc_opcode_supported, arc_opval_supported): New functions.
402 (insert_multshift, extract_multshift): Deleted.
403 * disassemble.c (disassembler, case bfd_arch_arc): Call
404 arc_get_disassembler to get disassembler routine.
407 Thu Feb 9 12:28:13 1995 Stan Shebs <shebs@andros.cygnus.com>
409 * i960-dis.c (struct tabent, struct sparse_tabent): Change the
410 signed char fields to shorts, more portable.
412 Wed Feb 8 17:29:29 1995 Stan Shebs <shebs@andros.cygnus.com>
414 * i960-dis.c (struct tabent, struct sparse_tabent): Declare the
415 char fields as signed chars, since they may have negative values.
417 Mon Feb 6 10:52:06 1995 J.T. Conklin <jtc@rtl.cygnus.com>
419 * i386-dis.c (dis386_twobyte): Add cpuid, From Charles Hannum
420 (mycroft@netbsd.org).
422 Mon Jan 30 12:38:00 1995 Ian Lance Taylor <ian@cygnus.com>
424 From "Logg, Ed" <elogg@ea.com>:
425 * ppc-opc.c (extract_bdm): Correct parenthezisation.
426 * ppc-dis.c (print_insn_powerpc): Print .long before unrecognized
429 Thu Jan 26 18:32:08 1995 Ian Lance Taylor <ian@cygnus.com>
431 * ppc-opc.c: Changes based on patch from David Edelsohn
432 <edelsohn@mhpcc.edu>.
433 (powerpc_operands): Add operands SPRBAT and SPRG. Split TBR out of
436 (insert_tbr): New static function.
437 (extract_tbr): New static function.
438 (XFXFXM_MASK, XFXM): Define.
439 (XSPRBAT_MASK, XSPRG_MASK): Define.
440 (powerpc_opcodes): Add instructions to access special registers by
441 name. Add mtcr and mftbu.
443 Tue Jan 17 10:56:43 1995 Ian Lance Taylor <ian@sanguine.cygnus.com>
445 * mips-opc.c (P3): Define.
446 (mips_opcodes): Add mad and madu.
448 Sun Jan 15 16:32:59 1995 Steve Chamberlain <sac@splat>
450 * configure.in: Add W65 support.
451 * disassemble.c: Likewise.
452 * w65-opc.h, w65-dis.c: New files.
454 Wed Dec 28 22:15:33 1994 Steve Chamberlain (sac@jonny.cygnus.com)
456 * h8300-dis.c (bfd_h8_disassemble): Add support for 2 bit
460 Tue Dec 20 10:36:55 1994 Doug Evans <dje@canuck.cygnus.com>
462 * arc-dis.c (print_insn_arc): Branch offsets are relative to delay
464 * arc-opc.c (extract_reladdr): New function.
465 (insert_reladdr): Store address right-shifted by 2.
468 Tue Dec 20 11:25:12 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
470 * mips-opc.c: Add dli as a synonym for li.
473 Mon Dec 19 12:35:51 1994 Doug Evans <dje@canuck.cygnus.com>
475 * arc-opc.c (insertion fns): Pass pointer to value's table entry.
477 (extraction fns): Insn argument now array of two words. Return pointer
478 to value's table entry. All uses changed.
479 (arc_opcode_lookup_suffix): Exported for arc-dis.c.
480 (insert_multshift, extract_multshift): New fns.
481 (arc_operands): Add support for cache bypass suffix. Add support for
482 predefined aux regs. Modifier bits moved to flags field.
483 (arc_opcodes): Likewise.
484 Add mul/mulu/shift insns. Syntax of zero/sign extension insns changed.
485 New insn rlc. Update to syntax in programmer's manual.
486 (arc_reg_names): Fix typo in lp_count. Add predefined aux regs.
487 (arc_suffixes): New synonyms lo,hs for cs,cc. New suffix for cache
489 (arc_opcode_init_tables): New argument to indicate cpu type.
490 (insert_reg): Handle predefined aux regs.
491 (extract_reg): Likewise.
492 (lookup_register): New fn.
493 * arc-dis.c (arc_condition_codes): Deleted.
494 (print_insn_arc): Handle insns with 32 bit immediate constants better.
495 Clean up modifier handling. Handle predefined aux regs.
498 Thu Dec 8 18:23:31 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
500 * alpha-dis.c (print_insn_alpha): Handle call_pal instruction, and
501 print something for reserved opcode values, even if it won't
504 * mips-dis.c (_print_insn_mips): When initializing, shift right
505 and mask, to avoid sign extension problems on the Alpha.
507 * m68k-dis.c (print_insn_arg, case 'J'): Handle buscr and pcr
511 Tue Nov 29 18:02:43 1994 Doug Evans <dje@canuck.cygnus.com>
513 * configure.in: Add ARC support.
514 * disassemble.c: Likewise.
515 * arc-dis.c, arc-opc.c: New files.
518 Wed Nov 23 22:34:51 1994 Steve Chamberlain (sac@jonny.cygnus.com)
520 * sh-opc.h (mov.l gbr): Get direction right.
521 * sh-dis.c (print_insn_shx): New function.
522 (print_insn_shl, print_insn_sh): Call print_insn_shx to
523 print opcodes with right byte order.
525 Thu Nov 3 19:32:22 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
527 * ns32k-dis.c (struct ns32k_option): Renamed from struct option,
528 to avoid conflicts with getopt.
530 Mon Oct 31 18:48:10 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
532 * hppa-dis.c (print_insn_hppa): Read the instruction using
533 bfd_getb32, so that it works on a little endian or 64 bit host.
534 Remove unused local variable op.
536 Tue Oct 25 17:07:57 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
538 * mips-opc.c: Use or instead of addu for pseudo-op move, since
539 addu does not work correctly if -mips3.
541 Wed Oct 19 13:40:16 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
543 * a29k-dis.c (print_special): Add special register names defined
544 on 29030, 29040 and 29050.
545 (print_insn): Handle new operand type 'I'.
547 Wed Oct 12 11:59:55 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
549 * Makefile.in (INSTALL): Use top level install.sh script.
551 Wed Oct 5 19:16:29 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
553 * sparc-dis.c: Rewrite to use bitfields, rather than a union, so
554 that it works on a little endian host.
556 Tue Oct 4 12:14:21 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
558 * configure.in: Use ${config_shell} when running config.bfd.
560 Wed Sep 21 18:49:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
562 * mips-opc.c (mips_opcodes): "dabs" is only available with -mips3.
564 Thu Sep 15 16:30:22 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
566 * a29k-dis.c (print_insn): Print the opcode.
568 Wed Sep 14 17:52:14 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
570 * mips-opc.c (mips_opcodes): Set WR_t for sc and scd.
572 Sun Sep 11 22:32:17 1994 Jeff Law (law@snake.cs.utah.edu)
574 * hppa-dis.c (reg_names): Use r26-r23 for arg0-arg3.
576 Tue Sep 6 11:37:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
578 * mips-opc.c: Set INSN_STORE_MEMORY flag for all instructions
579 which store a value into memory.
581 Sun Sep 04 17:58:10 1994 Richard Earnshaw (rwe@pegasus.esprit.ec.org)
583 * configure.in, Makefile.in, disassemble.c: Add support for the ARM.
584 * arm-dis.c, arm-opc.h: New files.
586 Fri Aug 5 14:00:05 1994 Stan Shebs (shebs@andros.cygnus.com)
588 * Makefile.in (ns32k-dis.o): Add dependency.
589 * ns32k-dis.c (print_insn_arg): Declare initialized local as
590 string, not as array of chars.
592 Thu Jul 28 18:14:16 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
594 * sparc-dis.c (print_insn_sparc): Handle new operand type 'x'.
596 * sparc-opc.c: Added sparclite extended FP operations, and
597 versions of v9 impdep* instructions permitting specification of
600 Tue Jul 26 16:36:03 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
602 * i960-dis.c (reg_names): Now const.
603 (struct sparse_tabent): New type, copied from array type in mem
605 (ctrl): Local static array ctrl_tab now const.
606 (cobr): Local static array cobr_tab now const.
607 (mem): Local variables reg1, reg2, reg3 now point to const. Local
608 static variable mem_tab no longer explicitly initialized. Changed
609 mem_init to const array of struct sparse_tabent.
610 (reg): Local static variable reg_tab no longer explicitly
611 initialized. Changed reg_init to const array of struct
613 (ea): Local static array scale_tab now const.
615 start-sanitize-i960xl
616 * i960-dis.c (reg): Added i960XL instructions to reg_init table.
620 Tue Jul 19 21:00:00 1994 DJ Delorie (dj@ctron.com)
622 * configure.bat: the disassember needs to be enabled for
623 "objdump -d" to work in djgpp.
625 Wed Jul 13 18:01:58 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
627 * ns32k-dis.c: Deleted all code in "#ifdef GDB".
628 (invalid_float): Enabled general version, doesn't require running
629 on ns32k host. Changed to take char* argument, and test for
630 explicitly specified sizes, instead of using sizeof() on host CPU
632 (INVALID_FLOAT): Cast first argument.
633 (opt_u, opt_U, opt_O, opt_C, opt_S, list_P532, list_M532,
634 list_P032, list_M032): Now const.
635 (optlist, list_search): Made appropriate arguments now point to
637 (print_insn_arg): Changed static array of one-character-string
638 pointers into a static const array of characters; fixed sprintf
639 statement accordingly.
641 Sun Jul 10 00:27:47 1994 Ian Dall (dall@hfrd.dsto.gov.au)
643 * opcodes/ns32k-dis.c: Semi-new file. Had apparently been dropped
644 from distribution. A ns32k-dis.c from a previous distribution has
645 been brought up to date and supports the new interface.
647 * disassemble.c: define ARCH_ns32k and add case bfd_arch_ns32k.
649 * configure.in: add bfd_ns32k_arch target support.
651 * Makefile.in: add ns32k-dis.o to ALL_MACHINES.
652 Add ns32k-dis.c to CFILES. Add dependencies for ns32k-dis.o.
654 Wed Jun 29 22:10:37 1994 Steve Chamberlain (sac@cygnus.com)
656 * h8300-dis.c (bfd_h8_disassemble): Get 16bit branch
659 Tue Jun 28 13:22:06 1994 Stan Shebs (shebs@andros.cygnus.com)
661 * h8300-dis.c, mips-dis.c: Don't use true and false.
663 Thu Jun 23 12:53:19 1994 David J. Mackenzie (djm@rtl.cygnus.com)
665 * configure.in: Change --with-targets to --enable-targets.
667 Wed Jun 22 13:38:32 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
669 * mips-dis.c (_print_insn_mips): Build a static hash table mapping
670 opcodes to the first instruction with that opcode, to speed
671 disassembly of large files. From ralphc@pyramid.com (Ralph
674 Tue Jun 7 12:49:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
676 * Makefile.in (mostlyclean): Fix typo (was mostyclean).
678 Wed May 11 22:32:00 1994 DJ Delorie (dj@ctron.com)
680 * configure.bat: update to latest makefile.in
682 Sat May 7 17:13:21 1994 Steve Chamberlain (sac@cygnus.com)
684 * a29k-dis.c (print_insn): Print 'x' type operand in hex.
685 * h8300-dis.c (bfd_h8_disassemble): Print 16bit rels correctly.
686 * sh-dis.c (print_insn_sh): Don't recur endlessly if delay
687 slot insn is in a delay slot.
688 * z8k-opc.h: (resflg): Fix patterns.
689 * h8500-opc.h Fix CR insn patterns.
691 Fri May 6 14:34:46 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
693 * ppc-opc.c (powerpc_opcodes): Put PowerPC versions of "cmp" and
694 "cmpl" before POWER versions, so that gas -many uses them.
696 Thu Apr 28 18:32:36 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
698 * disassemble.c: New file.
699 * Makefile.in (OFILES): Add disassemble.o.
700 (disassemble.o): Provide dependencies; compile with $(ARCHDEFS).
701 * configure.in: Define ARCHDEFS in Makefile. Code taken from
702 binutils/configure.in.
704 * m68k-dis.c (print_insn_m68k): If F_ALIAS flag is set, skip the
705 opcode being examined.
707 Thu Apr 21 17:08:40 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
709 * ppc-opc.c (powerpc_operands): Added RAL, RAM and RAS.
710 (insert_ral, insert_ram, insert_ras): New functions.
711 (powerpc_opcodes): Use RAL for load with update, RAM for lmw, and
712 RAS for store with update.
714 Sat Apr 16 23:41:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
716 * ppc-opc.c (powerpc_opcodes): Correct fcir. From David Edelsohn
717 (edelsohn@npac.syr.edu).
719 Wed Apr 6 17:11:45 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
721 * mips-opc.c (mips_opcodes): Correct operands of "nor" with an
724 Mon Apr 4 16:30:46 1994 Doug Evans (dje@canuck.cygnus.com)
726 * sparc-opc.c (sparc_opcodes): Fix "rd %fprs,%l0".
728 Mon Apr 4 13:22:00 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
730 * ppc-opc.c (powerpc_operands): The signedp field has been
731 removed, so don't initialize it. Set the PPC_OPERAND_SIGNED flag
732 instead. Add new operand SISIGNOPT.
733 (powerpc_opcodes): For lis, liu, addis, and cau use SISIGNOPT.
734 Based on patch from David Edelsohn (edelsohn@npac.syr.edu).
735 * ppc-dis.c (print_insn_powerpc): Check PPC_OPERAND_SIGNED rather
738 Wed Mar 30 00:31:49 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
740 * i386-dis.c (struct private): Renamed to dis_private. `private'
741 is a reserved word for dynix cc.
743 Mon Mar 28 13:00:15 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
745 * configure.in: Change error message to refer to bfd/config.bfd
746 rather than bfd/configure.in.
748 Mon Mar 28 12:28:30 1994 David Edelsohn (edelsohn@npac.syr.edu)
750 * ppc-opc.c: Define POWER2 as short alias flag.
751 (powerpc_opcodes): Add POWER/2 opcodes lfq*, stfq*, fcir[z], and
754 Wed Mar 23 12:23:05 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
756 * i960-dis.c (print_insn_i960): Don't read a second word for
757 opcodes 0, 1, 2 and 3.
759 Wed Mar 16 15:37:58 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
761 * configure.in: Don't build m68881-ext.o for bfd_m68k_arch.
763 Mon Mar 14 14:53:50 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
765 * m68881-ext.c: Removed; no longer used.
766 * Makefile.in: Changed accordingly.
768 * m68k-dis.c (ext_format_68881): Don't declare.
769 (print_insn_m68k): If an instruction uses place 'i', it uses at
770 least four fixed bytes.
771 (print_insn_arg): Don't bump p by 2 for case 'I', place 'i'. For
772 extended float, convert to double using floatformat_to_double, not
773 ieee_extended_to_double, and fetch the data before converting it.
775 Tue Mar 8 18:12:25 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
777 * mips-opc.c: It's sqrt.s, not sqrt.w. From
778 davidj@ICSI.Berkeley.EDU (David Johnson).
780 Tue Feb 8 16:55:27 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
782 * ppc-opc.c (powerpc_opcodes): The POWER uses bdn[l][a] where the
783 PowerPC uses bdnz[l][a].
785 Tue Feb 8 00:32:28 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
787 * dis-buf.c, i386-dis.c: Include sysdep.h.
789 Mon Feb 7 19:22:23 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
791 * configure.in (bfd_powerpc_arch): Use ppc-dis.o and ppc-opc.o.
793 * ppc-opc.c (powerpc_opcodes): Mark POWER instructions supported
794 by Motorola PowerPC 601 with PPC_OPCODE_601.
795 * ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc):
796 Disassemble Motorola PowerPC 601 instructions as well as normal
797 PowerPC instructions.
799 Sun Feb 6 07:45:17 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
801 * i960-dis.c (reg, mem): Just use a static array instead of
804 Sat Feb 5 00:04:02 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
806 * hppa-dis.c (print_insn_hppa): For '?' and '@' only adjust the
807 condition name index if this is for a negated condition.
809 * hppa-dis.c (print_insn_hppa): No space before 'H' operand.
810 Floating point format for 'H' operand is backwards from normal
811 case (0 == double, 1 == single). For '4', '6', '7', '9', and '8'
812 operands (fmpyadd and fmpysub), handle bizarre register
813 translation correctly for single precision format.
815 * hppa-dis.c (print_insn_hppa): Do not emit a space after 'F'
816 or 'I' operands if the next format specifier is 'M' (fcmp
817 condition completer).
819 Feb 4 23:38:03 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
821 * ppc-opc.c (powerpc_operands): New operand type MBE to handle a
822 single number giving a bitmask for the MB and ME fields of an M
823 form instruction. Change NB to accept 32, and turn it into 0;
824 also turn 0 into 32 when disassembling. Seperated SH from NB.
825 (insert_mbe, extract_mbe): New functions.
826 (insert_nb, extract_nb): New functions.
827 (SC_MASK): Mask out SA and LK bits.
828 (powerpc_opcodes): Change "cal" to use RT, D, RA rather than RT,
829 RA, SI. Change "liu" and "cau" to use UI rather than SI. Mark
830 "bctr" and "bctrl" as accepted by POWER. Change "rlwimi",
831 "rlimi", "rlwimi.", "rlimi.", "rlwinm", "rlinm", "rlwinm.",
832 "rlinm.", "rlmi", "rlmi.", "rlwnm", "rlnm", "rlwnm.", "rlnm." to
833 use MBE rather than MB. Add "mfmq" and "mtmq" POWER instructions.
834 (powerpc_macros): Define table of macro definitions.
835 (powerpc_num_macros): Define.
837 * ppc-dis.c (print_insn_powerpc): Don't skip optional operands
838 if PPC_OPERAND_NEXT is set.
840 Sat Jan 22 23:10:07 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
842 * i960-dis.c (print_insn_i960): Make buffer bfd_byte instead of
843 char. Retrieve contents using bfd_getl32 instead of shifting.
845 Fri Jan 21 19:01:39 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
847 * ppc-opc.c: New file. Opcode table for PowerPC, including
848 opcodes for POWER (RS/6000).
849 * ppc-dis.c: New file. PowerPC and Power (RS/6000) disassembler.
850 * Makefile.in (ALL_MACHINES): Add ppc-dis.o and ppc-opc.o.
851 (CFILES): Add ppc-dis.c.
852 (ppc-dis.o, ppc-opc.o): New targets.
853 * configure.in: Build ppc-dis.o and ppc-opc.o for bfd_rs6000_arch.
855 Mon Jan 17 20:05:49 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
857 * hppa-dis.c (print_insn_hppa): Handle 'N' in assembler template.
858 No space before 'u', 'f', or 'N'.
860 Sun Jan 16 14:20:16 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
862 * i386-dis.c (print_insn_i386): Add FIXME comment regarding reading
863 farther than we should.
865 * i386-dis.c (dis386): Use Yb and Yv for scasb and scasS.
867 Thu Jan 6 12:38:05 1994 David J. Mackenzie (djm@thepub.cygnus.com)
869 * sparc-dis.c m68k-dis.c alpha-dis.c a29k-dis.c: Fix comments.
871 Wed Jan 5 11:56:21 1994 David J. Mackenzie (djm@thepub.cygnus.com)
873 * i960-dis.c (print_insn_i960): Only read word2 if the instruction
874 needs it, to prevent reading past the end of a section.
876 Wed Nov 17 17:20:12 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
878 * mips-opc.h: Use macro for j instruction, to support SVR4 PIC.
879 Removed t,A case for la; always use t,A(b) case.
881 Mon Nov 8 12:37:36 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
883 From Ted Lemen <mellon@pepper.ncd.com>
884 * mips-dis.c (print_insn_arg): Handle 'k'.
885 * mips-opc.c: Make cache use k, not t.
887 Sun Nov 7 23:52:34 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
889 * alpha-opc.h, alpha-dis.c (print_insn_alpha): Add
890 FLOAT_MEMORY_FORMAT_CODE, FLOAT_BRANCH_FORMAT_CODE, correct
891 FLOAT_FORMAT_CODE to put out floating point register names.
893 Mon Nov 1 18:17:51 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
895 * mips-opc.c: Use macros for jal variants, to support SVR4 PIC.
897 Thu Oct 28 17:42:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
899 * a29k-dis.c (print_insn): Use 0x%08x, not 0x%8x.
901 Wed Oct 27 11:48:01 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
903 * mips-opc.c (dsll, dsra, dsrl): Added '>' cases for shift counts
904 larger than 32. Moved dsxx32 variants first for disassembler.
906 Mon Oct 25 11:33:14 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
908 * z8kgen.c, z8k-opc.h: Add full lda information.
910 Tue Oct 19 12:39:25 1993 Jeffrey A Law (law@cs.utah.edu)
912 * hppa-dis.c (print_insn_hppa): Do not emit a space after
913 movb instructions. Any necessary space will be emitted by
914 the code to handle nullification completers.
916 Wed Oct 13 16:19:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
918 * mips-opc.c: Moved l.d down so that it disassembles as ldc1.
920 Fri Oct 8 02:34:21 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
922 * alpha-opc.h: Add ldl_l, fix typo for ldq_u.
923 * alpha-dis.c (print_insn_alpha): Add code for PAL_FORMAT_CODE.
925 Tue Oct 5 17:47:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
927 * mips-opc.c: Correct lwu opcode value (book had it wrong).
929 Thu Sep 30 11:26:18 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
931 * z8k-dis.c (FETCH_DATA): get just the right amount of data.
932 (unpack_instr): Cope with ARG_IMM4M1 type instructions.
934 Wed Sep 29 16:24:49 1993 K. Richard Pixley (rich@sendai.cygnus.com)
936 * m88k-dis.c (m88kdis): comment change. Remove space after
938 (printop): handle new arg types DEC and XREG for m88110.
940 Tue Sep 28 19:20:16 1993 Jeffrey A Law (law@snake.cs.utah.edu)
942 * hppa-dis.c (print_insn_hppa): Handle 'z' operand
943 type for absolute branch addresses. Delete special
944 "ble" and "be" code in 'W' operand code.
946 Fri Sep 24 14:08:33 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
948 * mips-opc.c: Set hazard information correctly for branch
951 Fri Sep 17 04:41:17 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
953 * alpha-dis.c (print_insn_alpha), alpha-opc.h: Fix bugs, use
954 info->fprintf_func for printing and info->print_address_func for
957 Wed Sep 15 12:12:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
959 * mips-opc.c: Set INSN_TRAP for tXX instructions.
961 Thu Sep 9 10:11:27 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
963 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson):
964 Corrected second case of "b" for disassembler.
966 Tue Sep 7 14:25:15 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
968 * mips-dis.c, m88k-dis.c: Don't include libbfd.h. Changed calls
969 to BFD swapping routines to correspond to BFD name changes.
971 Thu Sep 2 10:35:25 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
973 * mips-opc.c: Change div machine instruction to be z,s,t rather
974 than s,t. Change div macro to be d,v,t rather than d,s,t.
975 Likewise for divu, ddiv, ddivu. Added z,s,t case for drem, dremu,
976 rem and remu which generates only the corresponding div
977 instruction. This is for compatibility with the MIPS assembler,
978 which only generates the simple machine instruction when an
979 explicit destination of $0 is used.
980 * mips-dis.c (print_insn_arg): Handle 'z' (always register zero).
982 Thu Aug 26 17:41:44 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
984 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Set
985 WR_31 hazard for bal, bgezal, bltzal.
987 Thu Aug 26 17:20:02 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
989 * hppa-dis.c (print_insn_hppa): Use print function
990 from within the disassemble_info, not fprintf_filtered.
992 Wed Aug 25 13:51:40 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
994 * hppa-dis.c (print_insn_hppa): Handle '|' like '>'. (From Jeff
995 Law, law@cs.utah.edu.)
997 Mon Aug 23 12:44:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
999 * mips-opc.c ("absu"): Removed.
1002 Fri Aug 20 10:52:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1004 * mips-opc.c: Added r6000 and r4000 instructions and macros.
1005 Changed hazard information to distinguish between memory load
1006 delays and coprocessor load delays.
1008 Wed Aug 18 15:39:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1010 * mips-opc.c: li.d uses "T,L", not "S,F". Added li.s.
1012 Tue Aug 17 09:44:42 1993 David J. Mackenzie (djm@thepub.cygnus.com)
1014 * configure.in: Don't pass cpu to config.bfd.
1016 Tue Aug 17 12:23:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1018 * m88k-dis.c (m88kdis): Make class unsigned.
1020 Thu Aug 12 15:08:18 1993 Ian Lance Taylor (ian@cygnus.com)
1022 * alpha-dis.c (print_insn_alpha): One branch format case was
1023 missing the instruction name.
1025 Wed Aug 11 19:29:39 1993 David J. Mackenzie (djm@thepub.cygnus.com)
1027 * Makefile.in (ALL_MACHINES): Renamed from DIS_LIBS.
1028 Add the arch-specific auxiliary files.
1029 (OFILES): Remove the arch-specific auxiliary files
1030 and use BFD_MACHINES instead of DIS_LIBS.
1031 * configure.in: Set BFD_MACHINES based on --with-targets option.
1033 Thu Aug 12 12:04:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1035 * mips-opc.c: Added lwc1 E,A(b) to go with lwc1 T,A(b). Similarly
1038 Sun Aug 8 15:09:30 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
1040 * sparc-opc.c: Change CONST to const to deal with gcc
1041 -Dconst=__const -traditional.
1043 Fri Aug 6 10:58:55 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1045 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Took
1046 coprocessor instructions out of #if 0, and made them use new
1049 Thu Aug 5 17:11:06 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
1051 * sparc-dis.c: Include ansidecl.h before opcodes/sparc.h.
1053 Fri Jul 30 18:48:15 1993 John Gilmore (gnu@cygnus.com)
1055 * sparc-opc.c: Add F_JSR, F_UNBR, or F_CONDBR flags to each branch
1056 instruction, for use by the disassembler.
1058 * sparc-dis.c (SEX): Add sign extension macro. Replace many
1059 hand-coded sign extensions that depended on 32-bit host ints.
1060 FIXME, we still depend on big-endian host bitfield ordering.
1061 (sparc_print_insn): Set the insn_info_valid field, and the
1062 other fields that describe the instruction being printed.
1064 Tue Jul 27 17:04:58 1993 Jim Wilson (wilson@sphagnum.cygnus.com)
1066 * sparc-opc.c (call): Accept all 6 addressing modes valid for
1067 `jmp' instead of just one of them.
1069 Wed Jul 21 11:43:32 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
1071 * hppa-dis.c: Move floating registers from reg_names to fp_reg_names.
1072 (fput_fp_reg_r): Renamed from fput_reg_r.
1073 (fput_fp_reg): New function.
1074 (print_insn_hppa): Use fput_fp_reg{,_r} where appropriate.
1076 * hppa-dis.c (print_insn_hppa, cases 'a', 'd'): Print space afterwards.
1078 * hppa-dis.c (print_insn_hppa, case 'd'): Use GET_COND not GET_FIELD.
1080 Mon Jul 19 13:52:21 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
1082 * hppa-dis.c (print_insn_hppa): Use extract_5r_store for 'r'.
1084 * hppa-dis.c (print_insn_hppa, case '>'): If next character is 'n',
1085 don't output a space.
1087 * hppa-dis.c (float_format_names): 10 is undefined, and 11 is quad.
1089 Sun Jul 18 16:30:02 1993 Jim Kingdon (kingdon@rtl.cygnus.com)
1091 * mips-opc.c: New file, containing opcode table from
1092 ../include/opcode/mips.h.
1093 * Makefile.in: Add it.
1095 Thu Jul 15 12:37:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1097 * m88k-dis.c: New file, moved in from gdb and changed to use the
1098 new dis-asm.h disassembler interface.
1099 * Makefile.in (DIS_LIBS): Added m88k-dis.o.
1100 (m88k-dis.o): New target.
1102 Tue Jul 13 10:04:16 1993 Ian Lance Taylor (ian@cygnus.com)
1104 * mips-dis.c (print_insn_arg, _print_insn_mips): Made pointer to
1105 argument string const char * to correspond to opcode/mips.h.
1107 Tue Jul 6 15:18:37 1993 Ian Lance Taylor (ian@cygnus.com)
1109 * mips-dis.c: Updated to account for name changes in new version
1111 * Makefile.in: Added header file dependencies.
1113 Sat Jul 3 23:47:56 1993 Doug Evans (dje@canuck.cygnus.com)
1115 * h8300-dis.c (bfd_h8_disassemble): Correct fetching of instruction.
1117 Thu Jul 1 12:23:38 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
1119 * m68k-dis.c (NEXTWORD, NEXTLONG): Use ((x) ^ 0x8000) - 0x8000 to sign
1120 extend, rather than shifts.
1122 Sun Jun 20 20:56:56 1993 Ken Raeburn (raeburn@poseidon.cygnus.com)
1124 * Makefile.in: Undo 15 June change.
1126 Fri Jun 18 14:15:15 1993 Per Bothner (bothner@deneb.cygnus.com)
1128 * m68k-dis.c (print_insn_arg): Change return value to byte count
1130 * m68k-dis.c: Re-write to detect invalid operands before
1131 printing anything, so we can handle this the same way we
1132 handle invalid opcodes.
1134 Thu Jun 17 15:01:36 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
1136 * sh-dis.c, sh-opc.h: Understand some more opcodes.
1138 Wed Jun 16 13:48:05 1993 Ian Lance Taylor (ian@cygnus.com)
1140 * hppa-dis.c: Include <ansidecl.h> and sysdep.h before other
1143 Tue Jun 15 21:45:26 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
1145 * sparc-dis.c: Don't declare qsort, since sysdep.h might.
1147 * configure.in: Do make sysdep.h link.
1148 * Makefile.in: Search ../include. Don't search ../bfd.
1150 Tue Jun 15 13:36:10 1993 Stu Grossman (grossman@cygnus.com)
1152 Changes from Jeff Law, law@cs.utah.edu:
1153 * hppa-dis.c: Fix typo. 'a' and 'd' were reversed.
1154 Do not print a space before the completers specified by
1157 Fri Jun 11 18:40:21 1993 Ken Raeburn (raeburn@cygnus.com)
1159 * mips-dis.c: No longer need to bomb out if HOST_64_BIT is
1160 defined, since gdb has been fixed.
1162 Changes from Jeff Law, law@cs.utah.edu:
1163 * hppa-dis.c (print_insn_hppa): Last argument to fput_reg,
1164 fput_reg_r, fput_creg, fput_const, and fputs_filtered should
1165 be a *disassemble_info, not a *FILE.
1166 * hppa-dis.c: Support 'd', '!', and 'a'.
1167 * hppa-dis.c: Support 's' to extract a 2 bit space register.
1168 * hppa-dis.c: Delete cases which are no longer needed.
1170 Fri Jun 11 07:53:48 1993 Jim Kingdon (kingdon@cygnus.com)
1172 * m68k-dis.c (print_insn_{m68k,arg}): Add MMU codes.
1174 Tue Jun 8 12:25:01 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
1176 * h8300-dis.c: New file, removed from bfd/cpu-h8300.c, with
1179 Mon Jun 7 12:58:49 1993 Per Bothner (bothner@rtl.cygnus.com)
1181 * Makefile.in (CSEARCH): Add -I../bfd for sysdep.h and bfd.h.
1182 * configure.in: No longer need to configure to get sysdep.h.
1184 Thu Jun 3 15:56:49 1993 Stu Grossman (grossman@cygnus.com)
1186 * Patches from Jeffrey Law <law@cs.utah.edu>.
1187 * hppa-dis.c: Support 'I', 'J', and 'K' in output
1188 templates for 1.1 FP computational instructions.
1190 Tue May 25 13:05:48 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
1192 * h8500-dis.c (print_insn_h8500): Address argument is type
1194 * z8k-dis.c (print_insn_z8k, print_insn_z8001, print_insn_z8002):
1197 * h8500-opc.h (addr_class_type): No comma at end of enumerator.
1198 * sh-opc.h (sh_nibble_type, sh_arg_type): Ditto.
1200 * sparc-dis.c (compare_opcodes): Move static declaration to
1203 Fri May 21 14:17:37 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1205 * sparc-dis.c (print_insn_sparc): Implement 'n' argument for unimp
1206 instruction, remove unimp hack from 'l' argument.
1208 Wed May 19 15:35:54 1993 Stu Grossman (grossman@cygnus.com)
1210 * z8k-dis.c (fetch_data): Use unsigned char to make ancient gcc's
1213 Fri May 14 15:22:46 1993 Ian Lance Taylor (ian@cygnus.com)
1215 * Based on patches from davidj@ICSI.Berkeley.EDU (David Johnson):
1216 * mips-dis.c (print_insn_arg): Handle 'C' for general coprocessor
1219 Fri May 14 00:09:14 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
1221 * hppa-dis.c: Include dis-asm.h before sysdep.h. Changed some
1222 arrays of string pointers to 2-d arrays of chars, to save
1225 Thu May 6 20:51:17 1993 Fred Fish (fnf@cygnus.com)
1227 * a29k-dis.c, alpha-dis.c, i960-dis.c, sparc-dis.c, z8k-dis.c:
1228 Cast second arg to read_memory_func to "bfd_byte *", as necessary.
1230 Tue May 4 20:31:10 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
1232 * hppa-dis.c: New file from Utah, adapted to new disassembler
1234 * Makefile.in: Include it.
1236 Mon Apr 26 18:17:42 1993 Steve Chamberlain (sac@thepub.cygnus.com)
1238 * sh-dis.c, sh-opc.h: New files.
1240 Fri Apr 23 18:51:22 1993 Steve Chamberlain (sac@thepub.cygnus.com)
1242 * alpha-dis.c, alpha-opc.h: New files.
1244 Tue Apr 6 12:54:08 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1246 * mips-dis.c: Sign extend 'j' and 'b' arguments, delta is a signed
1249 Mon Apr 5 17:37:37 1993 John Gilmore (gnu@cygnus.com)
1251 * sparc-dis.c: Make "ta" the default trap instruction, "t" the alias.
1253 Fri Apr 2 07:24:27 1993 Ian Lance Taylor (ian@cygnus.com)
1255 * a29k-dis.c, sparc-dis.c, sparc-opc.c: Use CONST rather than
1258 Thu Apr 1 11:20:43 1993 Jim Kingdon (kingdon@cygnus.com)
1260 * sparc-dis.c: Use fprintf_func a few places where I forgot,
1261 and double percent signs a few places.
1263 * a29k-dis.c, i960-dis.c: New, merged from gdb and binutils.
1265 * i386-dis.c, m68k-dis.c, mips-dis.c, sparc-dis.c:
1266 Use info->print_address_func not print_address.
1268 * dis-buf.c (generic_print_address): New function.
1270 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
1272 * Makefile.in: Add sparc-dis.c.
1273 sparc-dis.c: New file, merges binutils and gdb versions as follows:
1275 Add `add' instruction to the set that get checked
1276 for a preceding `sethi' in order to print an absolute address.
1277 * (print_insn): Disassembly prefers real instructions.
1278 (is_delayed_branch): Speed up.
1279 * sparc-opcode.h: Add ALIAS bit to aliases. Fix up opcode tables.
1280 Still missing some float ops, and needs testing.
1281 * sparc-pinsn.c (print_insn): Eliminate 'set' test, subsumed by
1282 F_ALIAS. Use printf, not fprintf, when not passing a file
1284 (compare_opcodes): Check that identical instructions have
1285 identical opcodes, complain otherwise.
1288 * Include reg_names.
1290 Use dis-asm.h/read_memory_func interface.
1292 Wed Mar 31 20:49:06 1993 K. Richard Pixley (rich@rtl.cygnus.com)
1294 * h8500-dis.c, i386-dis.c, m68k-dis.c, z8k-dis.c (fetch_data):
1295 deliberately return non-zero to setjmp from longjmp. Otherwise
1296 this code fails to compile.
1298 Wed Mar 31 17:04:31 1993 Stu Grossman (grossman@cygnus.com)
1300 * m68k-dis.c: Fix prototype for fetch_arg().
1302 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
1304 * dis-buf.c: New file, for new read_memory_func interface.
1305 Makefile.in (OFILES): Include it.
1306 m68k-dis.c, i386-dis.c, h8500-dis.c, mips-dis.c, z8k-dis.c:
1307 Use new read_memory_func interface.
1309 Mon Mar 29 14:02:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
1311 * h8500-dis.c (print_insn_h8500): Get sign of fp offsets right.
1312 * h8500-opc.h: Fix couple of opcodes.
1314 Wed Mar 24 02:03:36 1993 david d `zoo' zuhn (zoo at poseidon.cygnus.com)
1316 * Makefile.in: add dvi & installcheck targets
1318 Mon Mar 22 18:55:04 1993 John Gilmore (gnu@cygnus.com)
1320 * Makefile.in: Update for h8500-dis.c.
1322 Fri Mar 19 14:27:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
1324 * h8500-dis.c, h8500-opc.h: New files
1326 Thu Mar 18 14:12:37 1993 Per Bothner (bothner@rtl.cygnus.com)
1328 * mips-dis.c, z8k-dis.c: Converted to use interface defined in
1329 ../include/dis-asm.h.
1330 * m68k-dis.c: New file (merge of ../binutils/m68k-pinsn.c
1331 and ../gdb/m68k-pinsn.c).
1332 * i386-dis.c: New file (merge of ../binutils/i386-pinsn.c
1333 and ../gdb/i386-pinsn.c).
1334 * m68881-ext.c: New file. Moved definition of
1335 ext_format ext_format_68881 from ../gdb/m68k-tdep.c.
1336 * Makefile.in: Adjust for new files.
1337 * i386-dis.c: Patches from John Hassey (hassey@dg-rtp.dg.com).
1338 * m68k-dis.c: Recognize '9' placement code, so (say) pflush
1339 can be dis-assembled.
1341 Wed Feb 17 09:19:47 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
1343 * mips-dis.c (print_insn_arg): Now returns void.
1345 Mon Jan 11 16:09:16 1993 Fred Fish (fnf@cygnus.com)
1347 * mips-dis.c (ansidecl.h): Include for benefit of sysdep.h
1348 files that use the macros.
1350 Thu Jan 7 13:15:17 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1352 * mips-dis.c: New file, from gdb/mips-pinsn.c.
1353 * Makefile.in (DIS_LIBS): Added mips-dis.o.
1354 (CFILES): Added mips-dis.c.
1356 Thu Jan 7 07:36:33 1993 Steve Chamberlain (sac@thepub.cygnus.com)
1358 * z8k-dis.c (print_insn_z8001, print_insn_z8002): new routines
1359 * z8kgen.c, z8k-opc.h: fix sizes of some shifts.
1361 Tue Dec 22 15:42:44 1992 Per Bothner (bothner@rtl.cygnus.com)
1363 * Makefile.in: Improve *clean rules.
1364 * configure.in: Allow a default host.
1366 Tue Nov 17 19:53:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
1368 * Makefile.in: also use -I$(srcdir)/../bfd, since some sysdep
1369 files include other sysdep files
1371 Thu Nov 12 16:10:37 1992 Steve Chamberlain (sac@thepub.cygnus.com)
1373 * z8k-dis.c z8k-opc.h z8kgen.c: checkpoint
1375 Fri Oct 9 04:56:05 1992 John Gilmore (gnu@cygnus.com)
1377 * configure.in: For host support, use ../bfd/configure.host
1378 so it stays in sync with the ../bfd/hosts database.
1380 Thu Oct 1 23:38:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
1382 * configure.in: use cpu-vendor-os triple instead of nested cases
1384 Wed Sep 30 16:09:20 1992 Michael Werner (mtw@cygnus.com)
1386 * z8k-dis.c (unparse_instr): fix bug where opcode returned was
1387 *always* the wrong one.
1389 Wed Sep 30 07:42:17 1992 Steve Chamberlain (sac@thepub.cygnus.com)
1391 * z8kgen.c: added copyright info
1393 Tue Sep 29 12:20:21 1992 Steve Chamberlain (sac@thepub.cygnus.com)
1395 * z8k-dis.c (unparse_instr): prettier tabs
1396 * z8kgen.c -> z8k-opc.h: bug fixes in tables
1398 Fri Sep 25 12:50:32 1992 Stu Grossman (grossman at cygnus.com)
1400 * configure.in: Add ncr* configuration.
1401 * z8k-dis.c (struct instr_data_s): Make instr_asmsrc char to make
1402 picayune ANSI compilers happy.
1404 Sep 20 08:50:55 1992 Fred Fish (fnf@cygnus.com)
1406 * configure.in (i386): Make i386 and i486 synonymous for now.
1407 * configure.in (i[34]86-*-sysv4): Add my_host definition.
1409 Fri Sep 18 17:01:23 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
1411 * Makefile.in (install): Fix typo.
1413 Fri Sep 18 02:04:24 1992 John Gilmore (gnu@cygnus.com)
1415 * Makefile.in (make): Remove obsolete crud.
1416 (sparc-opc.o): Avoid Sun Make VPATH bug.
1418 Tue Sep 8 17:29:27 1992 K. Richard Pixley (rich@sendai.cygnus.com)
1420 * Makefile.in: since there are no SUBDIRS, remove rule and
1421 references of subdir_do.
1423 Tue Sep 8 17:02:58 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
1425 * Makefile.in (install): Get the library name right here too.
1426 Don't install bfd.h, since it's unrelated to this library. No
1427 subdirs to recurse into, either.
1428 (CFILES): The source file has a .c suffix, not .o.
1430 * sparc-opc.c: New file, moved from BFD.
1431 * Makefile.in (OFILES): Build it.
1433 Thu Sep 3 16:59:20 1992 Michael Werner (mtw@cygnus.com)
1435 * z8k-dis.c: fixed forward refferences of some declarations.
1437 Mon Aug 31 16:09:45 1992 Michael Werner (mtw@cygnus.com)
1439 * Makefile.in: get the name of the library right
1441 Mon Aug 31 13:47:35 1992 Steve Chamberlain (sac@thepub.cygnus.com)
1443 * z8k-dis.c: knows how to disassemble z8k stuff
1444 * z8k-opc.h: new file full of z8000 opcodes
1448 version-control: never