2 Wed Jan 22 20:13:51 1997 Fred Fish <fnf@cygnus.com>
4 * tic80-opc.c (tic80_opcodes): Expand comment to note that the
5 entries are presorted so that entries with the same mnemonic are
6 adjacent to each other in the table. Sort the entries for each
7 instruction so that this is true.
10 Mon Jan 20 12:48:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
12 * m68k-dis.c: Include <libiberty.h>.
13 (print_insn_m68k): Sort the opcode table on the most significant
17 Sat Jan 18 15:15:05 1997 Fred Fish <fnf@cygnus.com>
19 * tic80-dis.c (tic80_opcodes): Add "wrcr", "vmpy", "vrnd",
20 "vsub", "vst", "xnor", and "xor" instructions.
21 (V_a1): Renamed from V_a, msb of accumulator reg number.
22 (V_a0): Add macro, lsb of accumulator reg number.
24 Fri Jan 17 18:24:31 1997 Fred Fish <fnf@cygnus.com>
26 * tic80-dis.c (print_insn_tic80): Broke excessively long
27 function up into several smaller ones and arranged for
28 the instruction printing function to be callable recursively
29 to print vector instructions that have both a load and a
30 math instruction packed into a single opcode.
31 * tic80-opc.c (tic80_opcodes): Expand comment for vld opcode
32 to explain why it comes after the other vector opcodes.
35 Fri Jan 17 16:19:15 1997 J.T. Conklin <jtc@beauty.cygnus.com>
37 * m68k-opc.c (m68k_opcodes): add b, w, or l specifier to coldfire
38 move insns to handle immediate operands.
40 Thu Jan 17 16:19:00 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
42 * m68k-opc.c (m68k_opcodes): Delete duplicate entry for "cmpil".
43 fix operand mask in the "moveml" entries for the coldfire.
46 Thu Jan 16 20:54:40 1997 Fred Fish <fnf@cygnus.com>
48 * tic80-opc.c (V_a, V_m, V_S, V_Z, V_p, OP_V, MASK_V):
49 New macros for building vector instruction opcodes.
50 (tic80_opcodes): Remove all uses of FMT_SI, FMT_REG, and
51 FMT_LI, which were unused. The field is now a flags field.
52 Remove some opcodes that are possible, but illegal, such
53 as long immediate instructions with doubles for immediate
54 values. Add "vadd" and "vld" instructions.
56 Wed Jan 15 18:59:51 1997 Fred Fish <fnf@cygnus.com>
58 * tic80-opc.c (tic80_operands): Reorder some table entries to make
59 the order more logical. Move the shift alias instructions ("rotl",
60 "shl", "ins", "rotr", "extu", "exts", "srl", and "sra" to be
61 interspersed with the regular sr.x and sl.x instructions. Add
62 and test new instruction opcodes for "sl", "sli", "sr", "sri", "st",
63 "sub", "subu", "swcr", and "trap".
65 Tue Jan 14 19:42:50 1997 Fred Fish <fnf@cygnus.com>
67 * tic80-opc.c (OFF_SS_PC): Renamed from OFF_SS.
68 (OFF_SL_PC): Renamed from OFF_SL.
69 (OFF_SS_BR): New operand type for base relative operand.
70 (OFF_SL_BR): New operand type for base relative operand.
71 (REG_BASE): New operand type for base register operand.
72 (tic80_opcodes): Add and test "fmpy", "frndm", "frndn", "frndp",
73 "frndz", "fsqrt", "fsub", "illop0", "illopF", "ins", "jsr",
74 "ld", "ld.u", "lmo", "or", "rdcr", "rmo", "rotl", and "rotr"
76 * tic80-dis.c (print_insn_tic80): Print opcode name with fixed width
77 10 char field, padded with spaces on rhs, rather than a string
78 followed by a tab. Use renamed TIC80_OPERAND_PCREL flag bit rather
79 than old TIC80_OPERAND_RELATIVE. Add support for new
80 TIC80_OPERAND_BASEREL flag bit.
82 Mon Jan 13 15:58:56 1997 Fred Fish <fnf@cygnus.com>
84 * tic80-dis.c (print_insn_tic80): Print floating point operands
86 * tic80-opc.c (SPFI): Add single precision floating point
87 immediate operand type.
88 (ROTATE): Add rotate operand type for shifts.
89 (ENDMASK): Add for shifts.
90 (n): Macro for the 'n' bit.
91 (i): Macro for the 'i' bit.
92 (PD): Macro for the 'PD' field.
93 (P2): Macro for the 'P2' field.
94 (P1): Macro for the 'P1' field.
95 (tic80_opcodes): Add entries for "exts", "extu", "fadd",
99 Mon Jan 6 15:06:55 1997 Jeffrey A Law (law@cygnus.com)
101 * mn10200-dis.c (disassemble): Mask off unwanted bits after
102 adding in current address for pc-relative operands.
105 Mon Jan 6 10:56:25 1997 Fred Fish <fnf@cygnus.com>
107 * tic80-dis.c (R_SCALED): Add macro to test for ":s" modifier bit.
108 (print_insn_tic80): If R_SCALED then print ":s" modifier for operand.
109 * tic80-opc.c (REG0, REG22, REG27, SSOFF, LSOFF): Names
110 changed to REG_0, REG_22, REG_DEST, OFF_SS, OFF_SL respectively.
111 (SICR, LICR, REGM_SI, REGM_LI): Names changed to CR_SI, CR_LI,
112 REG_BASE_M_SI, REG_BASE_M_LI respectively.
113 (REG_SCALED, LSI_SCALED): New operand types.
114 (E): New macro for 'E' bit at bit 27.
115 (tic80_opcodes): Add and test dld, dld.u, dst, estop, and etrap
116 opcodes, including the various size flavors (b,h,w,d) for
117 the direct load and store instructions.
119 Sun Jan 5 12:18:14 1997 Fred Fish <fnf@cygnus.com>
121 * tic80-dis.c (M_SI, M_LI): Add macros to test for ":m" modifier bit
123 * tic80-dis.c (print_insn_tic80): Change comma and paren handling.
124 Use M_SI and M_LI macros to check for ":m" modifier for GPR operands.
125 * tic80-opc.c (tic80_operands): Add REGM_SI and REGM_LI operands.
126 (F, M_REG, M_LI, M_SI, SZ_REG, SZ_LI, SZ_SI, D, S): New bit-twiddlers.
127 (MASK_LI_M, MASK_SI_M, MASK_REG_M): Remove and replace in opcode
128 masks with "MASK_* & ~M_*" to get the M bit reset.
129 (tic80_opcodes): Add bsr, bsr.a, cmnd, cmp, dcachec, and dcachef.
131 Sat Jan 4 19:05:05 1997 Fred Fish <fnf@cygnus.com>
133 * tic80-dis.c (print_insn_tic80): Print TIC80_OPERAND_RELATIVE
134 correctly. Add support for printing TIC80_OPERAND_BITNUM and
135 TIC80_OPERAND_CC, and TIC80_OPERAND_CR operands in symbolic
137 * tic80-opc.c (tic80_operands): Add SSOFF, LSOFF, BITNUM,
138 CC, SICR, and LICR table entries.
139 (tic80_opcodes): Add and test "nop", "br", "bbo", "bbz",
140 "bcnd", and "brcr" opcodes.
143 Fri Jan 3 18:32:11 1997 Fred Fish <fnf@cygnus.com>
145 * ppc-opc.c (powerpc_operands): Make comment match the
146 actual fields (no shift field).
147 * sparc-opc.c (sparc_opcodes): Document why this cannot be "const".
149 * tic80-dis.c (print_insn_tic80): Replace abort stub with a
150 partial implementation, work in progress.
151 * tic80-opc.c (tic80_operands): Begin construction operands table.
152 (tic80_opcodes): Continue populating opcodes table and start
153 filling in the operand indices.
154 (tic80_num_opcodes): Add this.
157 Fri Jan 3 12:13:52 1997 Ian Lance Taylor <ian@cygnus.com>
159 * m68k-opc.c: Add #B case for moveq.
161 Thu Jan 2 12:14:29 1997 Jeffrey A Law (law@cygnus.com)
163 * mn10300-dis.c (disassemble): Make sure all variables are initialized
164 before they are used.
167 Tue Dec 31 12:20:38 1996 Jeffrey A Law (law@cygnus.com)
169 * v850-opc.c (v850_opcodes): Put curly-braces around operands
170 for "breakpoint" instruction.
173 Tue Dec 31 15:38:13 1996 Ian Lance Taylor <ian@cygnus.com>
175 * Makefile.in (ALL_CFLAGS): Add -D_GNU_SOURCE.
176 (dep): Use ALL_CFLAGS rather than CFLAGS.
179 Tue Dec 31 15:09:16 1996 Michael Meissner <meissner@tiktok.cygnus.com>
181 * v850-opc.c (D8_{6,7}): Set V850_OPERAND_ADJUST_SHORT_MEMORY
185 Mon Dec 30 17:02:11 1996 Fred Fish <fnf@cygnus.com>
187 * Makefile.in (m68k-opc.o, alpha-opc.o): Remove dis-asm.h dependency.
189 (tic80-dis.o, tic80-opc.o): Add rules per comment in Makefile.in.
192 Mon Dec 30 11:38:01 1996 Ian Lance Taylor <ian@cygnus.com>
194 * mips16-opc.c: Add "abs".
197 Sun Dec 29 10:58:22 1996 Fred Fish <fnf@cygnus.com>
199 * Makefile.in (ALL_MACHINES): Add tic80-dis.o and tic80-opc.o.
200 * disassemble.c (ARCH_tic80): Define if ARCH_all is defined.
201 (disassembler): Add bfd_arch_tic80 support to set disassemble
203 * tic80-dis.c (print_insn_tic80): Add stub.
205 Fri Dec 27 22:30:57 1996 Fred Fish <fnf@cygnus.com>
207 * configure.in (arch in $selarchs): Add bfd_tic80_arch entry.
208 * configure: Regenerate with autoconf.
209 * tic80-dis.c: Add file.
210 * tic80-opc.c: Add file.
214 Fri Dec 20 14:30:19 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
216 * d10v-opc.c (pre_defined_registers): Add cr[0-15], dpc, dpsw, link.
219 Mon Dec 16 13:00:15 1996 Jeffrey A Law (law@cygnus.com)
221 * mn10200-opc.c (mn10200_operands): Add SIMM16N.
222 (mn10200_opcodes): Use it for some logicals and btst insns.
223 Add "break" and "trap" instructions.
225 * mn10300-opc.c (mn10300_opcodes): Add "break" instruction.
227 * mn10200-opc.c: Add pseudo-ops for "mov (an),am" and "mov an,(am)".
229 Sat Dec 14 22:36:20 1996 Ian Lance Taylor <ian@cygnus.com>
231 * mips-dis.c (print_mips16_insn_arg): The base address of a PC
232 relative load or add now depends upon whether the instruction is
235 Wed Dec 11 09:23:46 1996 Jeffrey A Law (law@cygnus.com)
237 * mn10200-dis.c: Finish writing disassembler.
238 * mn10200-opc.c (mn10200_opcodes): Fix mask for "mov imm8,dn".
239 Fix mask for "jmp (an)".
241 * mn10300-dis.c (disassemble, print_insn_mn10300): Corrently
242 handle endianness issues for mn10300.
244 * mn10200-opc.c (mn10200_opcodes): Fix operands for "movb dm,(an)".
246 Tue Dec 10 12:08:05 1996 Jeffrey A Law (law@cygnus.com)
248 * mn10200-opc.c (mn10200_opcodes): "mov imm8,d0" is a format 2
249 instruction. Fix opcode field for "movb (imm24),dn".
251 * mn10200-opc.c (mn10200_operands): Fix insertion position
254 Mon Dec 9 16:42:43 1996 Jeffrey A Law (law@cygnus.com)
256 * mn10200-opc.c: Create mn10200 opcode table.
257 * mn10200-dis.c: Flesh out mn10200 disassembler. Not ready,
258 but moving along nicely.
260 Sun Dec 8 04:28:31 1996 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
262 * Makefile.in (ALL_MACHINES): Add mips16-opc.o.
264 Fri Dec 6 16:47:40 1996 J.T. Conklin <jtc@rhino.cygnus.com>
266 * m68k-opc.c (m68k_opcodes): Revert change to use < and >
267 specifiers for fmovem* instructions.
269 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
271 * mn10300-dis.c (disassemble): Remove '$' register prefixing.
273 Fri Dec 6 17:34:39 1996 Ian Lance Taylor <ian@cygnus.com>
275 * mips16-opc.c: Change opcode for entry/exit to avoid conflicting
278 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
280 * mn10300-opc.c: Add some comments explaining the various
283 * mn10300-dis.c (disassemble): Fix minor gcc -Wall warnings.
285 Thu Dec 5 12:09:48 1996 J.T. Conklin <jtc@rtl.cygnus.com>
287 * m68k-dis.c (print_insn_arg): Handle new < and > operand
290 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
291 operand specifiers in fmovm* instructions.
293 Wed Dec 4 14:52:18 1996 Ian Lance Taylor <ian@cygnus.com>
295 * ppc-opc.c (insert_li): Give an error if the offset has the two
296 least significant bits set.
298 Wed Nov 27 13:09:01 1996 Ian Lance Taylor <ian@cygnus.com>
300 * mips-dis.c (print_insn_mips16): Separate the instruction from
301 the arguments with a tab, not a space.
303 Tue Nov 26 13:24:17 1996 Jeffrey A Law (law@cygnus.com)
305 * mn10300-dis.c (disasemble): Finish conversion to '$' as
308 * mn10300-opc.c (mn10300_opcodes): Fix mask field for
311 Tue Nov 26 10:53:21 1996 Ian Lance Taylor <ian@cygnus.com>
313 * configure: Rebuild with autoconf 2.12.
315 Add support for mips16 (16 bit MIPS implementation):
316 * mips16-opc.c: New file.
317 * mips-dis.c: Include "elf-bfd.h" and "elf/mips.h".
318 (mips16_reg_names): New static array.
319 (print_insn_big_mips): Use print_insn_mips16 in 16 bit mode or
320 after seeing a 16 bit symbol.
321 (print_insn_little_mips): Likewise.
322 (print_insn_mips16): New static function.
323 (print_mips16_insn_arg): New static function.
324 * mips-opc.c: Add jalx instruction.
325 * Makefile.in (mips16-opc.o): New target.
326 * configure.in: Use mips16-opc.o for bfd_mips_arch.
327 * configure: Rebuild.
329 Mon Nov 25 16:15:17 1996 J.T. Conklin <jtc@cygnus.com>
331 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
332 operand specifiers in *save, *restore and movem* instructions.
334 * m68k-opc.c (m68k_opcodes): Fix move and movem instructions for
337 * m68k-opc.c (m68k_opcodes): The coldfire (mcf5200) can only use
338 register operands for immediate arithmetic, not, neg, negx, and
339 set according to condition instructions.
341 * m68k-opc.c (m68k_opcodes): Consistantly Use "s" as the storage
342 specifier of the effective-address operand in immediate forms of
343 arithmetic instructions. The specifier for the immediate operand
344 notes how and where the constant will be stored.
346 Mon Nov 25 11:17:01 1996 Jeffrey A Law (law@cygnus.com)
348 * mn10300-opc.c (mn10300_opcodes): Remove redundant "lcc"
351 * mn10300-dis.c (disassemble): Use '$' instead of '%' for
354 * mn10300-dis.c (disassemble): Prefix registers with '%'.
356 Wed Nov 20 10:37:13 1996 Jeffrey A Law (law@cygnus.com)
358 * mn10300-dis.c (disassemble): Handle register lists.
360 * mn10300-opc.c: Fix handling of register list operand for
361 "call", "ret", and "rets" instructions.
363 * mn10300-dis.c (disassemble): Print PC-relative and memory
364 addresses symbolically if possible.
365 * mn10300-opc.c: Distinguish between absolute memory addresses,
366 pc-relative offsets & random immediates.
368 * mn10300-dis.c (print_insn_mn10300): Fix fetch of last byte
370 (disassemble): Handle SPLIT and EXTENDED operands.
372 Tue Nov 19 13:33:01 1996 Jeffrey A Law (law@cygnus.com)
374 * mn10300-dis.c: Rough cut at printing some operands.
376 * mn10300-dis.c: Start working on disassembler support.
377 * mn10300-opc.c (mn10300_opcodes): Fix masks on several insns.
379 * mn10300-opc.c (mn10300_operands): Add "REGS" for a register
381 (mn10300_opcodes): Use REGS for register list in "movm" instructions.
384 Mon Nov 18 15:20:35 1996 Michael Meissner <meissner@tiktok.cygnus.com>
386 * d10v-opc.c (d10v_opcodes): Add3 sets the carry.
389 Fri Nov 15 13:43:19 1996 Jeffrey A Law (law@cygnus.com)
391 * mn10300-opc.c (mn10300_opcodes): Demand parens around
392 register argument is calls and jmp instructions.
394 Thu Nov 7 00:26:05 1996 Jeffrey A Law (law@cygnus.com)
396 * mn10300-opc.c (mn10300_opcodes): Use DN01 for putx and
397 getx operand. Fix opcode for mulqu imm,dn.
399 Wed Nov 6 13:42:32 1996 Jeffrey A Law (law@cygnus.com)
401 * mn10300-opc.c (mn10300_operands): Hijack "bits" field
402 in MN10300_OPERAND_SPLIT operands for how many bits
403 appear in the basic insn word. Add IMM32_HIGH24,
404 IMM32_HIGH24_LOWSHIFT8, IMM8E_SHIFT8.
405 (mn10300_opcodes): Use new operands as needed.
407 * mn10300-opc.c (mn10300_operands): Add IMM32_LOWSHIFT8
408 for bset, bclr, btst instructions.
409 (mn10300_opcodes): Use new IMM32_LOWSHIFT8 as needed.
411 * mn10300-opc.c (mn10300_operands): Remove many redundant
412 operands. Update opcode table as appropriate.
413 (IMM32): Add MN10300_OPERAND_SPLIT flag.
414 (mn10300_opcodes): Fix single bit error in mov imm32,dn insn.
416 Tue Nov 5 13:26:58 1996 Jeffrey A Law (law@cygnus.com)
418 * mn10300-opc.c (mn10300_operands): Add DN2, DM2, AN2, AM2
419 operands (for indexed load/stores). Fix bitpos for DI
420 operand. Add SN8N_SHIFT8, IMM8_SHIFT8, and D16_SHIFT for the
421 few instructions that insert immediates/displacements in the
422 middle of the instruction. Add IMM8E for 8 bit immediate in
423 the extended part of an instruction.
424 (mn10300_operands): Use new opcodes as appropriate.
427 Tue Nov 5 10:30:51 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
429 * d10v-opc.c (d10v_opcodes): Declare the trap instruction
430 sequential so the assembler never parallelizes it with
434 Mon Nov 4 12:50:40 1996 Jeffrey A Law (law@cygnus.com)
436 * mn10300-opc.c (mn10300_operands): Add DN01 and AN01 for
437 a data/address register that appears in register field 0
438 and register field 1.
439 (mn10300_opcodes): Use DN01 and AN01 for mov/cmp imm8,DN/AN
441 Fri Nov 1 10:29:11 1996 Richard Henderson <rth@tamu.edu>
443 * alpha-dis.c (print_insn_alpha): Use new NOPAL mask for
444 standard disassembly.
446 * alpha-opc.c (alpha_operands): Rearrange flags slot.
447 (alpha_opcodes): Add new BWX, CIX, and MAX instructions.
448 Recategorize PALcode instructions.
451 Wed Oct 30 16:46:58 1996 Jeffrey A Law (law@cygnus.com)
453 * v850-opc.c (v850_opcodes): Add relaxing "jbr".
456 Tue Oct 29 16:30:28 1996 Ian Lance Taylor <ian@cygnus.com>
458 * mips-dis.c (_print_insn_mips): Don't print a trailing tab if
459 there are no operand types.
462 Tue Oct 29 12:22:21 1996 Jeffrey A Law (law@cygnus.com)
464 * v850-opc.c (D9_RELAX): Renamed from D9, all references
466 (v850_operands): Make sure D22 immediately follows D9_RELAX.
469 Fri Oct 25 12:12:53 1996 Ian Lance Taylor <ian@cygnus.com>
471 * i386-dis.c (print_insn_x86): Set info->bytes_per_line to 5.
474 Thu Oct 24 17:53:52 1996 Jeffrey A Law (law@cygnus.com)
476 * v850-opc.c (insert_d8_6): Fix operand insertion for sld.w
477 and sst.w instructions.
479 * v850-opc.c (v850_opcodes): Add "jCC" instructions (aliases for
483 Thu Oct 24 17:21:20 1996 Ian Lance Taylor <ian@cygnus.com>
485 * mips-dis.c (_print_insn_mips): Use a tab between the instruction
488 Tue Oct 22 23:32:56 1996 Ian Lance Taylor <ian@cygnus.com>
490 * ppc-opc.c (PPCPWR2): Define.
491 (powerpc_opcodes): Use PPCPWR2 for fsqrt, rather than duplicating
494 Fri Oct 11 16:03:49 1996 Jeffrey A Law (law@cygnus.com)
496 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode
497 field for movhu instruction.
500 * v850-dis.c (disassemble): For V850_OPERAND_SIGNED operands,
501 cast value to "long" not "signed long" to keep hpux10
505 Thu Oct 10 10:25:58 1996 Jeffrey A Law (law@cygnus.com)
507 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode field
510 * mn10300-opc.c (FMT*): Remove definitions.
512 * mn10300-opc.c (mn10300_opcodes): Fix destination register
513 for shift-by-register opcodes.
515 * mn10300-opc.c (mn10300_operands): Break DN, DM, AN, AM
516 into [AD][MN][01] for encoding the position of the register
519 Wed Oct 9 11:19:26 1996 Jeffrey A Law (law@cygnus.com)
521 * mn10300-opc.c (mn10300_opcodes): Add "extended" instructions,
522 "putx", "getx", "mulq", "mulqu", "sat16", "sat24", "bsch".
524 Tue Oct 8 11:55:35 1996 Jeffrey A Law (law@cygnus.com)
526 * mn10300-opc.c (mn10300_operands): Remove "REGS" operand.
527 Fix various typos. Add "PAREN" operand.
529 (mn10300_opcodes): Surround all memory addresses with "PAREN"
530 operands. Fix several typos.
532 * mn10300-opc.c (mn10300_opcodes): Fix typos in yesterday's
535 Mon Oct 7 16:48:45 1996 Jeffrey A Law (law@cygnus.com)
537 * mn10300-opc.c (FMT_XX): Renumber starting at one.
538 (mn10300_operands): Rough cut. Enough to parse "mov" instructions
540 (mn10300_opcodes): Break opcode format out into its own field.
541 Update many operand fields to deal with signed vs unsigned
542 issues. Fix one or two typos in the "mov" instruction
543 opcode, mask and/or operand fields.
545 Mon Oct 7 11:39:49 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
547 * m68k-opc.c (plusha): Prefer encoding for m68040up, in case
550 Thu Oct 3 17:17:02 1996 Ian Lance Taylor <ian@cygnus.com>
552 * mn10300-opc.c (mn10300_opcodes): Add opcode & masks for
553 all opcodes. Very rough cut at operands for all opcodes.
555 * mn10300-opc.c (mn10300_opcodes): Start fleshing out the
558 Thu Oct 3 10:06:07 1996 Jeffrey A Law (law@cygnus.com)
560 * mn10200-opc.c, mn10300-opc.c: New files.
561 * mn10200-dis.c, mn10300-dis.c: New files.
562 * mn10x00-opc.c, mn10x00-dis.c: Deleted.
563 * disassemble.c: Break mn10x00 support into 10200 and 10300
565 * configure.in: Likewise.
566 * configure: Rebuilt.
568 Thu Oct 3 15:59:12 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
570 * Makefile.in (MOSTLYCLEAN): Move config.log to distclean.
572 Wed Oct 2 23:28:42 1996 Jeffrey A Law (law@cygnus.com)
574 * mn10x00-opc.c, mn10x00-dis.c: New files for Matsushita
576 * disassemble (ARCH_mn10x00): Define.
577 (disassembler): Handle bfd_arch_mn10x00.
578 * configure.in: Recognize bfd_mn10x00_arch.
579 * configure: Rebuilt.
581 Tue Oct 1 10:49:11 1996 Ian Lance Taylor <ian@cygnus.com>
583 * i386-dis.c (op_rtn): Change to be a pointer. Adjust uses
584 accordingly. Don't declare functions using op_rtn.
587 Fri Sep 27 18:28:59 1996 Stu Grossman (grossman@critters.cygnus.com)
589 * v850-dis.c (disassemble): Add memaddr argument. Re-arrange
590 params to be more standard.
591 * (disassemble): Print absolute addresses and symbolic names for
592 branch and jump targets.
593 * v850-opc.c (v850_operand): Add displacement flag to 9 and 22
595 * (v850_opcodes): Add breakpoint insn.
598 Mon Sep 23 12:32:26 1996 Ian Lance Taylor <ian@cygnus.com>
600 * m68k-opc.c: Move the fmovemx data register cases before the
601 other cases, so that they get recognized before the data register
602 does gets treated as a degenerate register list.
604 Tue Sep 17 12:06:51 1996 Ian Lance Taylor <ian@cygnus.com>
606 * mips-opc.c: Add a case for "div" and "divu" with two registers
607 and a destination of $0.
609 Tue Sep 10 16:12:39 1996 Fred Fish <fnf@rtl.cygnus.com>
611 * mips-dis.c (print_insn_arg): Add prototype.
612 (_print_insn_mips): Ditto.
614 Mon Sep 9 14:26:26 1996 Ian Lance Taylor <ian@cygnus.com>
616 * mips-dis.c (print_insn_arg): Print condition code registers as
619 Tue Sep 3 12:09:46 1996 Doug Evans <dje@canuck.cygnus.com>
621 * sparc-opc.c (sparc_opcodes): Add setuw, setsw, setx.
624 Tue Sep 3 12:05:25 1996 Jeffrey A Law (law@cygnus.com)
626 * v850-dis.c (disassemble): Make static. Provide prototype.
628 Sun Sep 1 22:30:40 1996 Jeffrey A Law (law@cygnus.com)
630 * v850-opc.c (insert_d9, insert_d22): Fix boundary case
633 Sat Aug 31 01:27:26 1996 Jeffrey A Law (law@cygnus.com)
635 * v850-dis.c (disassemble): Handle insertion of ',', '[' and
636 ']' characters into the output stream.
637 * v850-opc.c (v850_opcodes: Remove size field from all opcodes.
638 Add "memop" field to all opcodes (for the disassembler).
639 Reorder opcodes so that "nop" comes before "mov" and "jr"
642 * v850-dis.c (print_insn_v850): Fix typo in last change.
644 * v850-dis.c (print_insn_v850): Properly handle disassembling
645 a two byte insn at the end of a memory region when the memory
646 region's size is only two byte aligned.
648 * v850-dis.c (v850_cc_names): Fix stupid thinkos.
650 * v850-dis.c (v850_reg_names): Define.
651 (v850_sreg_names, v850_cc_names): Likewise.
652 (disassemble): Very rough cut at printing operands (unformatted).
654 * v850-opc.c (BOP_MASK): Fix.
655 (v850_opcodes): Fix mask for jarl and jr.
657 * v850-dis.c: New file. Skeleton for disassembler support.
658 * Makefile.in Remove v850 references, they're not needed here
659 and they weren't being sanitized away.
660 * configure.in: Add v850-dis.o when building v850 toolchains.
661 * configure: Rebuilt.
662 * disassemble.c (disassembler): Call v850 disassembler.
664 * v850-opc.c (insert_d8_7, extract_d8_7): New functions.
665 (insert_d8_6, extract_d8_6): New functions.
666 (v850_operands): Rename D7S to D7; operand for D7 is unsigned.
667 Rename D8 to D8_7, use {insert,extract}_d8_7 routines.
669 (IF4A, IF4B): Use "D7" instead of "D7S".
670 (IF4C, IF4D): Use "D8_7" instead of "D8".
671 (IF4E, IF4F): New. Use "D8_6".
672 (v850_opcodes): Use IF4A/IF4B for sld.b/sst.b. Use IF4C/IF4D for
673 sld.h/sst.h. Use IF4E/IF4F for sld.w/sst.w.
675 * v850-opc.c (insert_d16_15, extract_d16_15): New functions.
676 (v850_operands): Change D16 to D16_15, use special insert/extract
677 routines. New new D16 that uses the generic insert/extract code.
678 (IF7A, IF7B): Use D16_15.
679 (IF7C, IF7D): New. Use D16.
680 (v850_opcodes): Use IF7C and IF7D for ld.b and st.b.
682 * v850-opc.c (insert_d9, insert_d22): Slightly improve error
683 message. Issue an error if the branch offset is odd.
685 * v850-opc.c: Add notes about needing special insert/extract
686 for all the load/store insns, except "ld.b" and "st.b".
688 * v850-opc.c (insert_d22, extract_d22): New functions.
689 (v850_operands): Use insert_d22 and extract_d22 for
691 (insert_d9): Fix range check.
693 Fri Aug 30 18:01:02 1996 J.T. Conklin <jtc@hippo.cygnus.com>
695 * v850-opc.c (v850_operands): Add V850_OPERAND_SIGNED flag
696 and set bits field to D9 and D22 operands.
698 Thu Aug 29 11:10:46 1996 Jeffrey A Law (law@cygnus.com)
700 * v850-opc.c (v850_operands): Define SR2 operand.
701 (v850_opcodes): "ldsr" uses R1,SR2.
703 * v850-opc.c (v850_opcodes): Fix opcode specs for
704 sld.w, sst.b, sst.h, sst.w, and nop.
706 Wed Aug 28 15:55:43 1996 Jeffrey A Law (law@cygnus.com)
708 * v850-opc.c (v850_opcodes): Add null opcode to mark the
709 end of the opcode table.
713 Mon Aug 26 13:35:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
715 * d10v-opc.c (pre_defined_registers): Added register pairs,
716 "r0-r1", "r2-r3", etc.
720 Fri Aug 23 00:27:01 1996 Jeffrey A Law (law@cygnus.com)
722 * v850-opc.c (v850_operands): Make I16 be a signed operand.
723 Create I16U for an unsigned 16bit mmediate operand.
724 (v850_opcodes): Use I16U for "ori", "andi" and "xori".
726 * v850-opc.c (v850_operands): Define EP operand.
727 (IF4A, IF4B, IF4C, IF4D): Use EP.
729 * v850-opc.c (v850_opcodes): Fix opcode numbers for "mov"
730 with immediate operand, "movhi". Tweak "ldsr".
732 * v850-opc.c (v850_opcodes): Get ld.[bhw] and st.[bhw]
733 correct. Get sld.[bhw] and sst.[bhw] closer.
735 * v850-opc.c (v850_operands): "not" is a two byte insn
737 * v850-opc.c (v850_opcodes): Correct bit pattern for setf.
739 * v850-opc.c (v850_operands): D16 inserts at offset 16!
741 * v850-opc.c (two): Get order of words correct.
743 * v850-opc.c (v850_operands): I16 inserts at offset 16!
745 * v850-opc.c (v850_operands): Add "SR1" and "SR2" for system
746 register source and destination operands.
747 (v850_opcodes): Use SR1 and SR2 for "ldsr" and "stsr".
749 * v850-opc.c (v850_opcodes): Fix thinko in "jmp" opcode. Fix
750 same thinko in "trap" opcode.
752 * v850-opc.c (v850_opcodes): Add initializer for size field
755 * v850-opc.c (v850_operands): D6 -> DS7. References changed.
756 Add D8 for 8-bit unsigned field in short load/store insns.
757 (IF4A, IF4D): These both need two registers.
758 (IF4C, IF4D): Define. Use 8-bit unsigned field.
759 (v850_opcodes): For "sld.h", "sld.w", "sst.h", "sst.w", use
760 IF4C & IF4D. For "trap" use I5U, not I5. Add IF1 operand
761 for "ldsr" and "stsr".
762 * v850-opc.c (v850_operands): 3-bit immediate for bit insns
765 * v850-opc.c (v850_opcodes): Correct short store half (sst.h) and
766 short store word (sst.w).
768 Thu Aug 22 16:57:27 1996 J.T. Conklin <jtc@rtl.cygnus.com>
770 * v850-opc.c (v850_operands): Added insert and extract fields,
771 pointers to functions that handle unusual operand encodings.
773 Thu Aug 22 01:05:24 1996 Jeffrey A Law (law@cygnus.com)
775 * v850-opc.c (v850_opcodes): Enable "trap".
777 * v850-opc.c (v850_opcodes): Fix order of displacement
778 and register for "set1", "clr1", "not1", and "tst1".
780 Wed Aug 21 18:46:26 1996 Jeffrey A Law (law@cygnus.com)
782 * v850-opc.c (v850_operands): Add "B3" support.
783 (v850_opcodes): Fix and enable "set1", "clr1", "not1"
786 * v850-opc.c (v850_opcodes): "jmp" has only an R1 operand.
788 * v850-opc.c: Close unterminated comment.
790 Wed Aug 21 17:31:26 1996 J.T. Conklin <jtc@hippo.cygnus.com>
792 * v850-opc.c (v850_operands): Add flags field.
793 (v850_opcodes): add move opcodes.
795 Tue Aug 20 14:41:03 1996 J.T. Conklin <jtc@hippo.cygnus.com>
797 * Makefile.in (ALL_MACHINES): Add v850-opc.o.
798 * configure: (bfd_v850v_arch) Add new case.
799 * configure.in: (bfd_v850_arch) Add new case.
800 * v850-opc.c: New file.
803 Mon Aug 19 15:21:38 1996 Doug Evans <dje@canuck.cygnus.com>
805 * sparc-dis.c (print_insn_sparc): Handle little endian sparcs.
808 Thu Aug 15 13:14:43 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
810 * d10v-opc.c: Add additional information to the opcode
811 table to help determinine which instructions can be done
815 Thu Aug 15 13:11:13 1996 Stan Shebs <shebs@andros.cygnus.com>
817 * mpw-make.sed: Update editing of include pathnames to be
820 Thu Aug 15 16:28:41 1996 James G. Smith <jsmith@cygnus.co.uk>
822 * arm-opc.h: Added "bx" instruction definition.
824 Wed Aug 14 17:00:04 1996 Richard Henderson <rth@tamu.edu>
826 * alpha-opc.c (EV4EXTHWINDEX): Field width should be 8 not 5.
829 Mon Aug 12 14:30:37 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
831 * d10v-opc.c (d10v_opcodes): Minor fixes to addi and bl.l.
833 Fri Aug 9 13:21:59 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
835 * d10v-opc.c (d10v_opcodes): Correct 'mv' unit entry to EITHER.
838 Thu Aug 8 12:43:52 1996 Klaus Kaempf <kkaempf@progis.de>
840 * makefile.vms: Update for alpha-opc changes.
842 Wed Aug 7 11:55:10 1996 Ian Lance Taylor <ian@cygnus.com>
844 * i386-dis.c (print_insn_i386): Actually return the correct value.
845 (ONE, OP_ONE): #ifdef out; not used.
848 Fri Aug 2 17:47:03 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
850 * d10v-opc.c (d10v_opcodes): Added 2 accumulator sub instructions.
851 Changed subi operand type to treat 0 as 16.
854 Wed Jul 31 16:21:41 1996 Ian Lance Taylor <ian@cygnus.com>
856 * m68k-opc.c: Add cpushl for the mcf5200. From Ken Rose
859 Wed Jul 31 14:39:27 1996 James G. Smith <jsmith@cygnus.co.uk>
861 * arm-opc.h: (arm_opcodes): Added halfword and sign-extension
862 memory transfer instructions. Add new format string entries %h and %s.
863 * arm-dis.c: (print_insn_arm): Provide decoding of the new
867 Fri Jul 26 11:45:04 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
869 * d10v-opc.c (d10v_operands): Added UNUM4S; a 4-bit accumulator shift.
870 (d10v_opcodes): Modified accumulator shift instructions to use UNUM4S.
873 Fri Jul 26 14:01:43 1996 Ian Lance Taylor <ian@cygnus.com>
875 * alpha-dis.c (print_insn_alpha_osf): Remove.
876 (print_insn_alpha_vms): Remove.
877 (print_insn_alpha): Make globally visible. Chose the register
878 names based on info->flavour.
879 * disassemble.c: Always return print_insn_alpha for the alpha.
882 Thu Jul 25 15:24:17 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
884 * d10v-dis.c (dis_long): Handle unknown opcodes.
886 Thu Jul 25 12:08:09 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
888 * d10v-opc.c: Changes to support signed and unsigned numbers.
889 All instructions with the same name that have long and short forms
890 now end in ".l" or ".s". Divs added.
891 * d10v-dis.c: Changes to support signed and unsigned numbers.
893 Tue Jul 23 11:02:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
895 * d10v-dis.c: Change all functions to use info->print_address_func.
898 Mon Jul 22 15:38:53 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
900 * m68k-opc.c (m68k_opcodes): Make opcode masks for the ColdFire
901 move ccr/sr insns more strict so that the disassembler only
902 selects them when the addressing mode is data register.
905 Mon Jul 22 11:25:24 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
906 * d10v-opc.c (pre_defined_registers): Declare.
907 * d10v-dis.c (print_operand): Now uses pre_defined_registers
908 to pick a better name for the registers.
911 Mon Jul 22 13:47:23 1996 Ian Lance Taylor <ian@cygnus.com>
913 * sparc-opc.c: Fix opcode values for fpack16, and fpackfix. Fix
914 operands for fexpand and fpmerge. From Christian Kuehnke
915 <Christian.Kuehnke@arbi.informatik.uni-oldenburg.de>.
917 Mon Jul 22 13:17:06 1996 Richard Henderson <rth@tamu.edu>
919 * alpha-dis.c (print_insn_alpha): No longer the user-visible
920 print routine. Take new regnames and cpumask arguments.
921 Kill the environment variable nonsense.
922 (print_insn_alpha_osf): New function. Do OSF/1 style regnames.
923 (print_insn_alpha_vms): New function. Do VMS style regnames.
924 * disassemble.c (disassembler): Test bfd flavour to pick
925 between OSF and VMS routines. Default to OSF.
927 Thu Jul 18 17:19:34 1996 Ian Lance Taylor <ian@cygnus.com>
929 * configure.in: Call AC_SUBST (INSTALL_SHLIB).
930 * configure: Rebuild.
931 * Makefile.in (install): Use @INSTALL_SHLIB@.
934 Wed Jul 17 14:39:05 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
936 * configure: (bfd_d10v_arch) Add new case.
937 * configure.in: (bfd_d10v_arch) Add new case.
938 * d10v-dis.c: New file.
939 * d10v-opc.c: New file.
940 * disassemble.c (disassembler) Add entry for d10v.
943 Wed Jul 17 10:12:05 1996 J.T. Conklin <jtc@rtl.cygnus.com>
945 * m68k-opc.c (m68k_opcodes): Fix bugs in coldfire insns relating
946 to bcc, trapfl, subxl, and wddata discovered by Andreas Schwab.
948 Mon Jul 15 16:59:55 1996 Stu Grossman (grossman@critters.cygnus.com)
950 * i386-dis.c: Get rid of print_insn_i8086. Use info.mach to
951 distinguish between variants of the instruction set.
952 * sparc-dis.c: Get rid of print_insn_sparclite. Use info.mach to
953 distinguish between variants of the instruction set.
955 Fri Jul 12 10:12:01 1996 Stu Grossman (grossman@critters.cygnus.com)
957 * i386-dis.c (print_insn_i8086): New routine to disassemble using
958 the 8086 instruction set.
959 * i386-dis.c: General cleanups. Make most things static. Add
960 prototypes. Get rid of static variables aflags and dflags. Pass
961 them as args (to almost everything).
963 Thu Jul 11 11:58:44 1996 Jeffrey A Law (law@cygnus.com)
965 * h8300-dis.c (bfd_h8_disassemble): Handle macregs in ldmac insns.
967 * h8300-dis.c (bfd_h8_disassemble): Handle "ldm.l" and "stm.l".
969 * h8300-dis.c (bfd_h8_disassemble): "abs" is implicitly two
970 if the next arg is marked with SRC_IN_DST. Gross.
972 * h8300-dis.c (bfd_h8_disassemble): Print "exr" when
973 we're looking for and find EXR.
975 * h8300-dis.c (bfd_h8_disassemble): We don't have a match
976 if we're looking for KBIT and we don't find it.
978 * h8300-dis.c (bfd_h8_disassemble): Mask off unwanted bits
981 * h8300-dis.c (bfd_h8_disassemble): Don't set plen for
982 3bit immediate operands.
984 Tue Jul 9 10:55:20 1996 Ian Lance Taylor <ian@cygnus.com>
986 * Released binutils 2.7.
988 * alpha-opc.c: Add new case of "mov". From Klaus Kaempf
989 <kkaempf@progis.ac-net.de>.
991 Thu Jul 4 11:42:51 1996 Ian Lance Taylor <ian@cygnus.com>
993 * alpha-opc.c: Correct second case of "mov" to use OPRL.
995 Wed Jul 3 16:03:47 1996 Stu Grossman (grossman@critters.cygnus.com)
997 * sparc-dis.c (print_insn_sparclite): New routine to print
998 sparclite instructions.
1000 Wed Jul 3 14:21:18 1996 J.T. Conklin <jtc@rtl.cygnus.com>
1002 * m68k-opc.c (m68k_opcodes): Add coldfire support.
1004 Fri Jun 28 15:53:51 1996 Doug Evans <dje@canuck.cygnus.com>
1006 * sparc-opc.c (asi_table): Add #ASI_N, #ASI_N_L, #ASI_NUCLEUS,
1007 #ASI_NUCLEUS_LITTLE. Rename #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_L
1008 to #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_LITTLE.
1010 Tue Jun 25 22:58:31 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
1012 * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir):
1013 Use autoconf-set values.
1014 (docdir, oldincludedir): Removed.
1015 * configure.in (AC_PREREQ): autoconf 2.5 or higher.
1017 Fri Jun 21 13:53:36 1996 Richard Henderson <rth@tamu.edu>
1019 * alpha-opc.c: New file.
1020 * alpha-opc.h: Remove.
1021 * alpha-dis.c: Complete rewrite to use new opcode table.
1022 * configure.in: For bfd_alpha_arch, use alpha-opc.o.
1023 * configure: Rebuild with autoconf 2.10.
1024 * Makefile.in (ALL_MACHINES): Add alpha-opc.o.
1025 (alpha-dis.o): Depend upon $(INCDIR)/opcode/alpha.h, not
1027 (alpha-opc.o): New target.
1029 Wed Jun 19 15:55:12 1996 Ian Lance Taylor <ian@cygnus.com>
1031 * sparc-dis.c (print_insn_sparc): Remove unused local variable i.
1032 Set imm_added_to_rs1 even if the source and destination register
1035 * sparc-opc.c: Add some two operand forms of the wr instruction.
1037 Tue Jun 18 15:58:27 1996 Jeffrey A. Law <law@rtl.cygnus.com>
1039 * h8300-dis.c (bfd_h8_disassemble): Rename "hmode" argument
1042 * disassemble.c (disassembler): Handle H8/S.
1043 * h8300-dis.c (print_insn_h8300s): New function for H8/S.
1045 Tue Jun 18 18:06:50 1996 Ian Lance Taylor <ian@cygnus.com>
1047 * sparc-opc.c: Add beq/teq as aliases for be/te.
1049 * ppc-opc.c: Fix fcmpo opcode. From Sergei Steshenko
1050 <sergei@msil.sps.mot.com>.
1052 Tue Jun 18 15:08:54 1996 Klaus Kaempf <kkaempf@progis.de>
1054 * makefile.vms: New file.
1056 * alpha-dis.c (print_insn_alpha): Print lda ra,lit(rz) as mov.
1058 Mon Jun 10 18:50:38 1996 Ian Lance Taylor <ian@cygnus.com>
1060 * h8300-dis.c (bfd_h8_disassemble): Always print ABS8MEM with :8,
1063 Tue Jun 4 09:15:53 1996 Doug Evans <dje@canuck.cygnus.com>
1065 * i386-dis.c (OP_OFF): Call append_prefix.
1067 Thu May 23 15:18:23 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1069 * ppc-opc.c (instruction encoding macros): Add explicit casts to
1070 unsigned long to silence a warning from the Solaris PowerPC
1073 Thu Apr 25 19:33:32 1996 Doug Evans <dje@canuck.cygnus.com>
1075 * sparc-opc.c (sparc_opcodes): Add ultrasparc vis extensions.
1077 Mon Apr 22 17:12:35 1996 Doug Evans <dje@blues.cygnus.com>
1079 * sparc-dis.c (X_IMM,X_SIMM): New macros.
1081 (print_insn_sparc): Merge cases i,I,j together. New cases X,Y.
1082 * sparc-opc.c (sparc_opcodes): Use X for 5 bit shift constants,
1083 Y for 6 bit shift constants. Rewrite entries for crdcxt, cwrcxt,
1084 cpush, cpusha, cpull sparclet insns.
1086 Wed Apr 17 14:20:22 1996 Doug Evans <dje@canuck.cygnus.com>
1088 * sparc-dis.c (compute_arch_mask): Replace ANSI style def with K&R.
1090 Thu Apr 11 17:30:02 1996 Ian Lance Taylor <ian@cygnus.com>
1092 * sparc-opc.c: Set F_FBR on floating point branch instructions.
1093 Set F_FLOAT on other floating point instructions.
1095 Mon Apr 8 17:02:48 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1097 * ppc-opc.c (PPC860): Macro for 860/821 specific instructions and
1099 (powerpc_opcodes): Add 860/821 specific SPRs.
1101 Mon Apr 8 14:00:44 1996 Ian Lance Taylor <ian@cygnus.com>
1103 * configure.in: Permit --enable-shared to specify a list of
1104 directories. Set and substitute BFD_PICLIST.
1105 * configure: Rebuild.
1106 * Makefile.in (BFD_PICLIST): Rename from BFD_LIST. Change all
1107 uses. Set to @BFD_PICLIST@.
1109 Fri Apr 5 17:12:27 1996 Jeffrey A Law (law@cygnus.com)
1111 * h8300-dis.c (bfd_h8_disassemble): Use "bit" for L_3 immediates,
1112 not "abs", which may be needed for the absolute in something
1113 like btst #0,@10:8. Print L_3 immediates separately from other
1114 immediates. Change ABSMOV reference to ABS8MEM.
1116 Wed Apr 3 10:40:45 1996 Doug Evans <dje@canuck.cygnus.com>
1118 * sparc-dis.c (opcodes_initialized): Move inside print_insn_sparc.
1119 (current_arch_mask): New static global.
1120 (compute_arch_mask): New static function.
1121 (print_insn_sparc): Delete sparc_v9_p. New static local
1122 current_mach. Resort opcode table if current_mach changes.
1123 Generalize "insn not supported" test.
1124 (compare_opcodes): Prefer supported opcodes to nonsupported ones.
1125 Delete test for v9/!v9.
1126 * sparc-opc.c (MASK_*): Use SPARC_OPCODE_ARCH_MASK.
1128 (brfc): Split into CBR and FBR for coprocessor/fp branches.
1129 (brfcx): Renamed to FBRX.
1130 (condfc): Renamed to CONDFC. Pass v6notlet to CBR (standard
1131 coprocessor mnemonics are not supported on the sparclet).
1132 (condf): Renamed to CONDF.
1133 (SLCBCC2): Delete F_ALIAS flag.
1135 Sat Mar 30 21:45:59 1996 Doug Evans <dje@canuck.cygnus.com>
1137 * sparc-opc.c (sparc_opcodes): rd must be 0 for
1138 mov foo,{%y,%psr,%wim,%tbr}. Support mov foo,%asrX.
1140 Fri Mar 29 13:02:40 1996 Ian Lance Taylor <ian@cygnus.com>
1142 * Makefile.in (config.status): Depend upon BFD VERSION file, so
1143 that the shared library version number is set correctly.
1145 Tue Mar 26 15:47:14 1996 Ian Lance Taylor <ian@cygnus.com>
1147 * configure.in: Use AC_CHECK_TOOL to find ar and ranlib. From
1148 Miles Bader <miles@gnu.ai.mit.edu>.
1149 * configure: Rebuild.
1151 Sat Mar 16 13:04:07 1996 Fred Fish <fnf@cygnus.com>
1153 * z8kgen.c (internal, gas): Call xmalloc rather than unchecked
1156 Tue Mar 12 12:14:10 1996 Ian Lance Taylor <ian@cygnus.com>
1158 * configure: Rebuild with autoconf 2.8.
1160 Thu Mar 7 15:11:10 1996 Doug Evans <dje@charmed.cygnus.com>
1162 * sparc-dis.c (print_insn_sparc): Handle 'O' operand char like 'r'.
1163 * sparc-opc.c (sparc_opcodes): Use 'O' operand char for `neg reg'.
1165 Tue Mar 5 15:51:57 1996 Ian Lance Taylor <ian@cygnus.com>
1167 * configure.in: Don't set SHLIB or SHLINK to an empty string,
1168 since they appear as targets in Makefile.in.
1169 * configure: Rebuild.
1171 Mon Feb 26 13:03:40 1996 Stan Shebs <shebs@andros.cygnus.com>
1173 * mpw-make.sed: Edit out shared library support bits.
1175 Tue Feb 20 20:48:28 1996 Doug Evans <dje@charmed.cygnus.com>
1177 * sparc-opc.c (v8,v6notv9): Add MASK_SPARCLET.
1178 (sparc_opcode_archs): Add MASK_V8 to sparclet entry.
1179 (sparc_opcodes): Add sparclet insns.
1180 (sparclet_cpreg_table): New static local.
1181 (sparc_{encode,decode}_sparclet_cpreg): New functions.
1182 * sparc-dis.c (print_insn_sparc): Handle sparclet cpregs.
1184 Tue Feb 20 11:02:44 1996 Alan Modra <alan@mullet.Levels.UniSA.Edu.Au>
1186 * i386-dis.c (index16): New static variable.
1187 (putop): Print jecxz for 32 bit case, jcxz for 16 bit, not the
1189 (OP_indirE): Return result of OP_E.
1190 (OP_E): Check for 16 bit addressing mode, and disassemble
1191 correctly. Optimised 32 bit case a little. Don't print
1192 "(base,index,scale)" when sib specifies only an offset.
1194 Mon Feb 19 12:32:17 1996 Ian Lance Taylor <ian@cygnus.com>
1196 * configure.in: Set and substitute SHLIB_DEP.
1197 * configure: Rebuild.
1198 * Makefile.in (SHLIB_DEP): New variable.
1199 (LIBIBERTY_LISTS, BFD_LIST): New variables.
1200 (stamp-piclist): Depend upon LIBIBERTY_LISTS and BFD_LIST. If
1201 COMMON_SHLIB, add them to piclist with appropriate modifications.
1202 ($(SHLIB)): Depend upon $(SHLIB_DEP). Don't check COMMON_SHLIB
1203 here: just use piclist.
1205 Mon Feb 19 02:03:50 1996 Doug Evans <dje@charmed.cygnus.com>
1207 * sparc-dis.c (MASK_V9,V9_ONLY_P,V9_P): Define.
1208 (print_insn_sparc): Rewrite v9/not-v9 tests.
1209 (compare_opcodes): Likewise.
1210 * sparc-opc.c (MASK_<ARCH>): Define.
1211 (v6,v7,v8,sparclite,v9,v9a): Redefine.
1212 (sparclet,v6notv9): Define.
1213 (sparc_opcode_archs): Delete member `conflicts'. Add `supported'.
1214 (sparc_opcodes): Delete F_NOTV9, use v6notv9 instead.
1216 Thu Feb 15 14:45:05 1996 Ian Lance Taylor <ian@cygnus.com>
1218 * configure.in: Call AC_PROG_CC before configure.host.
1219 * configure: Rebuild.
1221 * Makefile.in (SONAME): Remove leading ../bfd/ from $(SHLIB).
1223 Wed Feb 14 19:01:27 1996 Alan Modra <alan@spri.levels.unisa.edu.au>
1225 * i386-dis.c (onebyte_has_modrm): New static array.
1226 (twobyte_has_modrm): New static array.
1227 (print_insn_i386): Only fetch the mod/reg/rm byte if it is needed.
1229 Tue Feb 13 15:15:01 1996 Ian Lance Taylor <ian@cygnus.com>
1231 * Makefile.in ($(SHLINK)): Check ts against $(SHLIB), not
1234 Mon Feb 12 16:26:06 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1236 * ppc-opc.c (PPC): Undef, so default defination on Windows NT
1239 Wed Feb 7 13:59:54 1996 Ian Lance Taylor <ian@cygnus.com>
1241 * m68k-opc.c (m68k_opcodes): The bkpt instruction is supported on
1242 m68010up, not just m68020up | cpu32.
1244 * Makefile.in (SONAME): New variable.
1245 ($(SHLINK)): Make a link to the transformed name, as well.
1246 (stamp-tshlink): New target.
1247 (install): Skip stamp-tshlink during install.
1249 Tue Feb 6 12:28:54 1996 Ian Lance Taylor <ian@cygnus.com>
1251 * configure.in: Call AC_ARG_PROGRAM.
1252 * configure: Rebuild.
1253 * Makefile.in (program_transform_name): New variable.
1254 (install): Transform library name before installing it.
1256 Mon Feb 5 16:14:42 1996 Ian Lance Taylor <ian@cygnus.com>
1258 * i960-dis.c (mem): Add HX dcinva instruction.
1260 Support for building as a shared library, based on patches from
1261 Alan Modra <alan@spri.levels.unisa.edu.au>:
1262 * configure.in: Add AC_ARG_ENABLE for shared and commonbfdlib.
1263 New substitutions: ALLLIBS, PICFLAG, SHLIB, SHLIB_CC,
1264 SHLIB_CFLAGS, COMMON_SHLIB, SHLINK.
1265 * configure: Rebuild.
1266 * Makefile.in (ALLLIBS): New variable.
1267 (PICFLAG, SHLIB, SHLIB_CC, SHLIB_CFLAGS): New variables.
1268 (COMMON_SHLIB, SHLINK): New variables.
1269 (.c.o): If PICFLAG is set, compile twice, once PIC, once normal.
1270 (STAGESTUFF): Remove variable.
1271 (all): Depend upon $(ALLLIBS) rather than $(TARGETLIB).
1272 (stamp-piclist, piclist): New targets.
1273 ($(SHLIB), $(SHLINK)): New targets.
1274 ($(OFILES)): Depend upon stamp-picdir.
1275 (disassemble.o): Build twice if PICFLAG is set.
1276 (MOSTLYCLEAN): Add pic/*.o.
1277 (clean): Remove $(SHLIB), $(SHLINK), piclist, and stamp-piclist.
1278 (distclean): Remove pic and stamp-picdir.
1279 (install): Install shared libraries.
1280 (stamp-picdir): New target.
1282 Fri Feb 2 17:15:25 1996 Doug Evans <dje@charmed.cygnus.com>
1284 * sparc-dis.c (print_insn_sparc): Delete DISASM_RAW_INSN support.
1285 Print unknown instruction as "unknown", rather than in hex.
1287 Tue Jan 30 14:06:08 1996 Ian Lance Taylor <ian@cygnus.com>
1289 * dis-buf.c: Include "sysdep.h" before "dis-asm.h".
1291 Thu Jan 25 20:24:07 1996 Doug Evans <dje@charmed.cygnus.com>
1293 * sparc-opc.c (sparc_opcode_archs): Mark v8/sparclite as conflicting.
1295 Thu Jan 25 11:56:49 1996 Ian Lance Taylor <ian@cygnus.com>
1297 * i386-dis.c (print_insn_i386): Only fetch the mod/reg/rm byte
1298 when necessary. From Ulrich Drepper
1299 <drepper@myware.rz.uni-karlsruhe.de>.
1301 Thu Jan 25 03:39:10 1996 Doug Evans <dje@charmed.cygnus.com>
1303 * sparc-dis.c (print_insn_sparc): NUMOPCODES replaced with
1304 sparc_num_opcodes. Update architecture enum values.
1305 * sparc-opc.c (sparc_opcode_archs): Replaces architecture_pname.
1306 (sparc_opcode_lookup_arch): New function.
1307 (sparc_num_opcodes): Renamed from bfd_sparc_num_opcodes.
1308 (sparc_opcodes): Add v9a shutdown insn.
1310 Mon Jan 22 08:29:59 1996 Doug Evans <dje@charmed.cygnus.com>
1312 * sparc-dis.c (print_insn_sparc): Renamed from print_insn.
1313 If DISASM_RAW_INSN, print insn in hex. Handle v9a as opcode
1315 (print_insn_sparc64): Deleted.
1316 * disassemble.c (disassembler, case bfd_arch_sparc): Always use
1319 * sparc-opc.c (architecture_pname): Add v9a.
1321 Fri Jan 12 14:35:58 1996 David Mosberger-Tang <davidm@AZStarNet.com>
1323 * alpha-opc.h (alpha_insn_set): VAX floating point opcode was
1324 incorrectly defined as 0x16 when it should be 0x15.
1325 (FLOAT_FORMAT_MASK): function code is 11 bits, not just 7 bits!
1326 (alpha_insn_set): added cvtst and cvttq float ops. Also added
1327 excb (exception barrier) which is defined in the Alpha
1328 Architecture Handbook version 2.
1329 * alpha-dis.c (print_insn_alpha): Fixed special-case decoding for
1330 OPERATE_FORMAT_CODE type instructions. The bug caused mulq to be
1331 disassembled as or, for example.
1333 Wed Jan 10 12:37:22 1996 Ian Lance Taylor <ian@cygnus.com>
1335 * mips-dis.c (print_insn_arg): Print cases 'i' and 'u' in hex.
1336 (_print_insn_mips): Change i from int to unsigned int.
1338 Thu Jan 4 17:21:10 1996 David Edelsohn <edelsohn@mhpcc.edu>
1340 * ppc-opc.c (powerpc_opcodes): tlbi POWER opcode form different
1341 from tlbie PowerPC opcode. Add PPC603 tlbld and tlbli.
1343 Thu Dec 28 13:29:19 1995 John Hassey <hassey@rtp.dg.com>
1345 * i386-dis.c: Added Pentium Pro instructions.
1347 Tue Dec 19 22:56:35 1995 Michael Meissner <meissner@tiktok.cygnus.com>
1349 * ppc-opc.c (fsqrt{,.}): Duplicate for PowerPC in addition to
1352 Fri Dec 15 14:14:15 1995 J.T. Conklin <jtc@rtl.cygnus.com>
1354 * sh-opc.h (sh_nibble_type): Added REG_B.
1355 (sh_arg_type): Added A_REG_B.
1356 (sh_table): Added pref and bank reg versions of ldc, ldc.l, stc
1358 * sh-dis.c (print_insn_shx): Added cases for REG_B and A_REG_B.
1360 Fri Dec 15 16:44:31 1995 Ian Lance Taylor <ian@cygnus.com>
1362 * disassemble.c (disassembler): Use new bfd_big_endian macro.
1364 Tue Dec 12 12:22:24 1995 Ian Lance Taylor <ian@cygnus.com>
1366 * Makefile.in (distclean): Remove stamp-h. From Ronald
1367 F. Guilmette <rfg@monkeys.com>.
1369 Tue Dec 5 13:42:44 1995 Stan Shebs <shebs@andros.cygnus.com>
1371 From David Mosberger-Tang <davidm@azstarnet.com>:
1372 * alpha-dis.c (print_insn_alpha): fixed decoding of cpys
1375 Mon Dec 4 12:29:05 1995 J.T. Conklin <jtc@rtl.cygnus.com>
1377 * sh-opc.h (sh_arg_type): Added A_SSR and A_SPC.
1378 (sh_table): Added many SH3 opcodes.
1379 * sh-dis.c (print_insn_shx): Added cases for A_SSR and A_SPC.
1381 Fri Dec 1 07:42:18 1995 Michael Meissner <meissner@tiktok.cygnus.com>
1383 * ppc-opc.c (subfc., subfco): Mark this PPCCOM, not PPC.
1384 (subco,subco.): Mark this PPC, not PPCCOM.
1386 Mon Nov 27 13:09:52 1995 Ian Lance Taylor <ian@cygnus.com>
1388 * configure: Rebuild with autoconf 2.7.
1390 Tue Nov 21 18:28:06 1995 Ian Lance Taylor <ian@cygnus.com>
1392 * configure: Rebuild with autoconf 2.6.
1394 Wed Nov 15 19:02:53 1995 Ken Raeburn <raeburn@cygnus.com>
1396 * configure.in: Sort list of architectures. Accept but do nothing
1397 for alliant, convex, pyramid, romp, and tahoe.
1399 Wed Nov 8 20:18:59 1995 Ian Lance Taylor <ian@cygnus.com>
1401 * a29k-dis.c (print_special): Change num to unsigned int.
1403 Wed Nov 8 20:10:35 1995 Eric Freudenthal <freudenthal@nyu.edu>
1405 * a29k-dis.c (print_insn): Cast insn24 to unsigned long when
1408 Tue Nov 7 15:21:06 1995 Ian Lance Taylor <ian@cygnus.com>
1410 * configure.in: Call AC_CHECK_PROG to find and cache AR.
1411 * configure: Rebuilt.
1413 Mon Nov 6 17:39:47 1995 Harry Dolan <dolan@ssd.intel.com>
1415 * configure.in: Add case for bfd_i860_arch.
1416 * configure: Rebuild.
1418 Fri Nov 3 12:45:31 1995 Ian Lance Taylor <ian@cygnus.com>
1420 * m68k-opc.c (m68k_opcodes): Correct fmoveml operands.
1421 * m68k-dis.c (NEXTSINGLE): Change i to unsigned int.
1422 (NEXTDOUBLE): Likewise.
1423 (print_insn_m68k): Don't match fmoveml if there is more than one
1424 register in the list.
1425 (print_insn_arg): Handle a place of '8' for a type of 'L'.
1427 Thu Nov 2 23:06:33 1995 Ian Lance Taylor <ian@cygnus.com>
1429 * m68k-opc.c: Use #W rather than #w.
1430 * m68k-dis.c (print_insn_arg): Handle new 'W' place.
1432 Wed Nov 1 13:30:24 1995 Ian Lance Taylor <ian@cygnus.com>
1434 * m68k-opc.c (m68k_opcode_aliases): Add dbfw as an alias for dbf,
1435 and likewise for all the dbxx opcodes.
1437 Mon Oct 30 20:50:40 1995 Fred Fish <fnf@cygnus.com>
1439 * arc-dis.c: Include elf-bfd.h rather than libelf.h.
1441 Mon Oct 23 11:11:34 1995 James G. Smith <jsmith@pasanda.cygnus.co.uk>
1443 * mips-opc.c: Added shorthand (V1) for INSN_4100 manifest. Added
1444 the VR4100 specific instructions to the mips_opcodes structure.
1446 Thu Oct 19 11:05:23 1995 Stan Shebs <shebs@andros.cygnus.com>
1448 * mpw-config.in, mpw-make.sed: Remove ugly workaround for
1449 ugly Metrowerks bug in CW6, is fixed in CW7.
1451 Mon Oct 16 12:59:01 1995 Michael Meissner <meissner@tiktok.cygnus.com>
1453 * ppc-opc.c (whole file): Add flags for common/any support.
1455 Tue Oct 10 11:06:07 1995 Fred Fish <fnf@cygnus.com>
1457 * Makefile.in (BISON): Remove macro.
1458 (FLAGS_TO_PASS): Remove BISON.
1460 Fri Oct 6 16:26:45 1995 Ken Raeburn <raeburn@cygnus.com>
1462 Mon Sep 25 22:49:32 1995 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1464 * m68k-dis.c (print_insn_m68k): Recognize all two-word
1465 instructions that take no args by looking at the match mask.
1466 (print_insn_arg): Always print "%" before register names.
1467 [case 'c']: Use "nc" for the no-cache case, as recognized by gas.
1468 [case '_']: Don't print "@#" before address.
1469 [case 'J']: Use "%s" as format string, not register name.
1470 [case 'B']: Treat place == 'C' like 'l' and 'L'.
1472 Thu Oct 5 22:16:20 1995 Ken Raeburn <raeburn@cygnus.com>
1474 * i386-dis.c: Describe cmpxchg8b operand, and spell the opcode
1477 Tue Oct 3 08:30:20 1995 steve chamberlain <sac@slash.cygnus.com>
1479 From David Mosberger-Tang <davidm@azstarnet.com>
1481 * alpha-opc.h (MEMORY_FUNCTION_FORMAT_MASK): added.
1482 (alpha_insn_set): added definitions for VAX floating point
1483 instructions (Unix compilers don't generate these, but handcoded
1484 assembly might still use them).
1486 * alpha-dis.c (print_insn_alpha): added support for disassembling
1487 the miscellaneous instructions in the Alpha instruction set.
1489 Tue Sep 26 18:47:20 1995 Stan Shebs <shebs@andros.cygnus.com>
1491 * mpw-config.in: Add m68k-opc.c.o to BFD_MACHINES for m68k,
1492 no longer create sysdep.h, sed ppc-opc.c to work around a
1493 serious Metrowerks C bug.
1494 * mpw-make.in: Remove.
1495 * mpw-make.sed: New file, used by mpw-configure to edit
1496 Makefile.in into an MPW makefile.
1498 Wed Sep 20 12:55:28 1995 Ian Lance Taylor <ian@cygnus.com>
1500 * Makefile.in (maintainer-clean): New synonym for realclean.
1502 Tue Sep 19 15:28:36 1995 Ian Lance Taylor <ian@cygnus.com>
1504 * m68k-opc.c: Split pmove patterns which use 'P' into patterns
1505 which use '0', '1', and '2' instead. Specify the proper size for
1506 a pmove immediate operand. Correct the pmovefd patterns to be
1507 moves to a register, not from a register.
1508 * m68k-dis.c (print_insn_arg): Replace 'P' with '0', '1', '2'.
1510 Thu Sep 14 11:58:22 1995 Doug Evans <dje@canuck.cygnus.com>
1512 * sparc-opc.c (sparc_opcodes): Mark all insns that reference
1513 %psr, %wim, %tbr as F_NOTV9.
1515 Fri Sep 8 01:07:38 1995 Ian Lance Taylor <ian@cygnus.com>
1517 * Makefile.in (Makefile): Just rebuild Makefile when running
1519 (config.h, stamp-h): New targets.
1520 * configure.in: Call AC_CONFIG_HEADER and AC_CANONICAL_SYSTEM
1521 earlier. Don't bother to call AC_ARG_PROGRAM. Touch stamp-h when
1522 rebuilding config.h.
1523 * configure: Rebuild.
1525 * mips-opc.c: Change unaligned loads and stores with "t,A"
1526 operands to use "t,A(b)".
1528 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
1530 * sh-dis.c (print_insn_shx): Add F_FR0 support.
1532 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
1534 * sh-dis.c (print_insn_shx): Change loop over op->arg[n] to iterate
1535 until 3 instead of until 2.
1537 Wed Sep 6 21:21:33 1995 Ian Lance Taylor <ian@cygnus.com>
1539 * Makefile.in (ALL_CFLAGS): Define.
1540 (.c.o, disassemble.o): Use $(ALL_CFLAGS).
1541 (MOSTLYCLEAN): Add config.log.
1542 (distclean): Don't remove config.log.
1543 * configure.in: Substitute HDEFINES.
1544 * configure: Rebuild.
1546 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
1548 * sh-opc.h (sh_arg_type): Add F_FR0.
1549 (sh_table, case fmac): Add F_FR0 as first argument.
1551 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
1553 * sh-opc.h (sh_opcode_info): Increase arg array size to 4.
1555 Tue Sep 5 18:28:10 1995 Doug Evans <dje@canuck.cygnus.com>
1557 * sparc-dis.c: Remove all references to NO_V9.
1559 Tue Sep 5 20:03:26 1995 Ian Lance Taylor <ian@cygnus.com>
1561 * aclocal.m4: Just include ../bfd/aclocal.m4.
1562 * configure: Rebuild.
1564 Tue Sep 5 16:09:59 1995 Doug Evans <dje@canuck.cygnus.com>
1566 * sparc-dis.c (X_DISP19): Define.
1567 (print_insn, case 'G'): Use it.
1568 (print_insn, case 'L'): Sign extend displacement.
1570 Mon Sep 4 14:28:46 1995 Ian Lance Taylor <ian@cygnus.com>
1572 * configure.in: Run ../bfd/configure.host before AC_PROG_CC.
1573 Subsitute CFLAGS and AR. Call AC_PROG_INSTALL. Don't substitute
1574 host_makefile_frag or frags.
1575 * aclocal.m4: New file.
1576 * configure: Rebuild.
1577 * Makefile.in (INSTALL): Set to @INSTALL@.
1578 (INSTALL_PROGRAM): Set to @INSTALL_PROGRAM@.
1579 (INSTALL_DATA): Set to @INSTALL_DATA@.
1581 (AR_FLAGS): Set to rc rather than qc.
1582 (CC): Define as @CC@.
1583 (CFLAGS): Set to @CFLAGS@.
1584 (@host_makefile_frag@): Remove.
1585 (config.status): Remove dependency upon @frags@.
1587 * configure.in: ../bfd/config.bfd now just sets shell variables.
1588 Use them rather than looking through target Makefile fragments.
1589 * configure: Rebuild.
1591 Thu Aug 31 12:35:32 1995 Jim Wilson <wilson@chestnut.cygnus.com>
1593 * sh-opc.h (ftrc): Change FPUL_N to FPUL_M.
1595 Wed Aug 30 13:52:28 1995 Doug Evans <dje@canuck.cygnus.com>
1597 * sparc-opc.c (sparc_opcodes): Delete duplicate wr %y insn.
1598 Add clrx, iprefetch, signx, clruw, cas, casl, casx, casxl synthetic
1601 * sparc-opc.c (sparc_opcodes): Fix prefetcha insn.
1602 (lookup_{name,value}): New functions.
1603 (prefetch_table): New static local.
1604 (sparc_{encode,decode}_prefetch): New functions.
1605 * sparc-dis.c (print_insn): Handle '*' arg (prefetch function).
1607 Wed Aug 30 11:11:58 1995 Jim Wilson <wilson@chestnut.cygnus.com>
1609 * sh-opc.h: Add blank lines to improve readabililty of sh3e
1612 Wed Aug 30 11:09:38 1995 Jim Wilson <wilson@chestnut.cygnus.com>
1614 * sh-dis.c: Correct comment on first line of file.
1616 Tue Aug 29 15:37:18 1995 Doug Evans <dje@canuck.cygnus.com>
1618 * disassemble.c (disassembler): Handle bfd_mach_sparc64.
1620 * sparc-opc.c (asi, membar): New static locals.
1621 (sparc_{encode,decode}_{asi,membar}): New functions.
1622 (sparc_opcodes, membar insn): Fix.
1623 * sparc-dis.c (print_insn): Call sparc_decode_asi.
1624 Support decoding of membar masks.
1627 Sat Aug 26 21:22:48 1995 Ian Lance Taylor <ian@cygnus.com>
1629 * m68k-opc.c (m68k_opcode_aliases): Add br, brs, brb, brw, brl.
1631 Mon Aug 21 17:33:36 1995 Ian Lance Taylor <ian@cygnus.com>
1633 * m68k-opc.c (m68k_opcode_aliases): Add bhib as an alias for bhis,
1634 and likewise for the other branches. Add bhs as an alias for bcc,
1635 and likewise for the size variants. Add dbhs as an alias for
1638 Fri Aug 11 13:40:24 1995 Jeff Law (law@snake.cs.utah.edu)
1640 * sh-opc.h (FP sts instructions): Update to match reality.
1642 Mon Aug 7 16:12:58 1995 Ian Lance Taylor <ian@cygnus.com>
1644 * m68k-dis.c: (fpcr_names): Add % before all register names.
1645 (reg_names): Likewise.
1646 (print_insn_arg): Don't explicitly print % before register names.
1647 Add % before register names in static array names. In case 'r',
1648 print data registers as `@(Dn)', not `Dn@'. When printing a
1649 memory address, don't print @# before it.
1650 (print_indexed): Change base_disp and outer_disp from int to
1651 bfd_vma. Print using MIT syntax, not mutant invalid Motorola
1652 syntax. Sign extend 8 byte displacement correctly.
1653 (print_base): Print using MIT syntax. Print zpc when appropriate.
1654 Change parameter disp from int to bfd_vma.
1656 * m68k-opc.c (m68k_opcode_aliases): Add jsrl and jsrs as aliases
1659 Mon Aug 7 02:21:40 1995 Jeff Law (law@snake.cs.utah.edu)
1661 * sh-dis.c (print_insn_shx): Handle new operand types F_REG_N,
1662 F_REG_M, FPSCR_M, FPSCR_N, FPUL_M and FPUL_N.
1663 * sh-opc.h (sh_arg_type): Add new operand types.
1664 (sh_table): Add new opcodes from SH3E Floating Point ISA.
1666 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
1668 * Makefile.in (distclean): Remove generated file config.h.
1670 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
1672 * Makefile.in (distclean): Remove generated file config.h.
1674 Wed Aug 2 18:33:40 1995 Ian Lance Taylor <ian@cygnus.com>
1676 * m68k-opc.c: New file, holding tables from include/opcode/m68k.h.
1678 * m68k-dis.c: Remove BREAK_UP_BIG_DECL stuff.
1680 (print_insn_m68k): Change d to be const. Use m68k_numopcodes
1681 rather than numopcodes. Use m68k_opcodes rather than removed
1682 opcode function. Don't check F_ALIAS.
1683 (print_insn_arg): Change first parameter to be const char *.
1684 * Makefile.in (ALL_MACHINES): Add m68k-opc.o.
1685 (m68k-opc.o): New target.
1686 * configure.in: Build m68k-opc.o for bfd_m68k_arch.
1687 * configure: Rebuild.
1689 Wed Aug 2 08:23:38 1995 Doug Evans <dje@canuck.cygnus.com>
1691 * sparc-dis.c (HASH_SIZE, HASH_INSN): Define.
1692 (opcode_bits, opcode_hash_table): New variables.
1693 (opcodes_initialized): Renamed from opcodes_sorted.
1694 (build_hash_table): New function.
1695 (is_delayed_branch): Use hash table.
1696 (print_insn): Renamed from print_insn_sparc, made static.
1697 Build and use hash table. If !sparc64, ignore sparc64 insns,
1698 and vice-versa if sparc64.
1699 (print_insn_sparc, print_insn_sparc64): New functions.
1700 (compare_opcodes): Move sparc64 opcodes to end.
1701 Print commutative insns with constant second.
1702 * sparc-opc.c (all non-v9 insns): Use flag F_NOTV9 instead of F_ALIAS.
1704 Tue Aug 1 00:12:49 1995 Ian Lance Taylor <ian@cygnus.com>
1706 * sh-dis.c (print_insn_shx): Remove unused local dslot. Use
1707 print_address_func for A_BDISP12 and A_BDISP8. Correct test which
1708 avoids printing a delay slot in a delay slot.
1709 * sh-opc.h (sh_table): Fully bracket last entry.
1711 Mon Jul 31 12:04:47 1995 Doug Evans <dje@canuck.cygnus.com>
1713 * sparc-opc.c (sllx, srax, srlx): Fix disassembly.
1715 Wed Jul 12 00:59:34 1995 Ken Raeburn <raeburn@kr-pc.cygnus.com>
1717 * configure.in: Get host_makefile_frag from ${srcdir}.
1719 * configure.in: Autoconfiscated. Check for string[s].h. Create
1720 config.h from config.in. Don't set up sysdep.h link.
1721 * sysdep.h: New file.
1722 * configure, config.in: New files, generated from configure.in.
1723 * Makefile.in: Updated to be processed autoconf-style.
1724 (distclean): Keep sysdep.h. Remove config.log and config.cache.
1725 (Makefile): Depend on config.status.
1726 (config.status): New rule.
1727 * configure.bat: Update Makefile substitutions.
1729 Tue Jul 11 14:23:37 1995 Jeff Spiegel <jeffs@lsil.com>
1731 * mips-opc.c (L1): Define.
1732 (mips_opcodes): Add R4010 instructions: flushi, flushd, flushid,
1733 addciu, madd, maddu, ffc, ffs, msub, msubu, selsi, selsr, waiti,
1736 Tue Jul 11 11:49:49 1995 Ian Lance Taylor <ian@cygnus.com>
1738 * mips-opc.c (mips_opcodes): For the move pseudo-op, prefer daddu
1739 if ISA 3 and addu otherwise, replacing or, since some MIPS chips
1740 have multiple add units but only a single logical unit.
1742 * ppc-opc.c (powerpc_operands): Change CR to use a bitsize of 3,
1743 shifted by 18, without any insertion or extraction function.
1744 (insert_cr, extract_cr): Remove.
1747 Mon Jul 3 11:54:31 1995 Ian Lance Taylor <ian@cygnus.com>
1749 * Makefile.in (ALL_MACHINES): Add arc-dis.o and arc-opc.o.
1752 Wed Jun 21 20:05:39 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
1754 * m68k-dis.c (print_insn_arg, print_indexed): Print "%" before
1757 Thu Jun 15 17:23:31 1995 Stan Shebs <shebs@andros.cygnus.com>
1759 * mpw-config.in: Add sh and i386 configs, remove sparc config.
1760 * sh-opc.h: Add copyright.
1762 Mon Jun 5 03:30:43 1995 Ken Raeburn <raeburn@kr-laptop.cygnus.com>
1764 * Makefile.in (crunch-m68k): Delete extra target accidentally
1765 checked in a while ago.
1767 Wed May 24 16:22:13 1995 Jim Wilson <wilson@chestnut.cygnus.com>
1769 * sh-opc.h (sh_table): Add SH3 support.
1771 Wed May 24 14:16:08 1995 Steve Chamberlain <sac@slash.cygnus.com>
1773 * sh-opc.h: Added bsrf and braf.
1775 Wed May 10 14:28:16 1995 Richard Earnshaw (rearnsha@armltd.co.uk)
1777 * arm-opc.h (arm_opcodes): Add 64-bit multiply patterns. Delete
1778 bogus [ls]fm{ea,fd} patterns.
1780 * arm-opc.h (arm_opcodes): Correct typos in stm, ldm, std, and ldc.
1781 * arm-dis.c (print_insn_arm): Make GIVEN a parameter, don't try and
1782 initialize it from memory. Make function static.
1783 (print_insn_{big,little}_arm): New functions.
1784 * disassemble.c (disassembler, case bfd_arch_arm): Disassemble for
1785 the correct endianness.
1788 Sat Apr 29 23:20:05 1995 Doug Evans <dje@chestnut.cygnus.com>
1790 * arc-opc.c (arc_opcodes): Add ARC_OPCODE_CONDITIONAL_BRANCH flag.
1791 (arc_suffixes): Use ARC_DELAY_{NONE,NORMAL,JUMP}.
1794 Mon Apr 24 14:18:05 1995 Jason Molenda (crash@phydeaux.cygnus.com>
1796 * sh-opc.h (sh_nibble_type, sh_arg_type): remove trailing , from
1799 Wed Apr 19 14:07:03 1995 Michael Meissner <meissner@tiktok.cygnus.com>
1801 * m68k-dis.c (opcode): Finish change made by Kung Hsu on April
1802 17th, so that it builds again using GCC as the compiler.
1804 Tue Apr 18 12:14:51 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
1806 * mips-dis.c (print_insn_little_mips): Cast return value from
1807 bfd_getl32 from bfd_vma to unsigned long, because _print_insn_mips
1808 expects an unsigned long, and that might be fewer words of
1809 argument storage (e.g., if bfd_vma is long long on a 32-bit
1811 (print_insn_big_mips): Likewise with bfd_getb32 value.
1812 (_print_insn_mips): Now static.
1814 Mon Apr 17 12:23:28 1995 Kung Hsu <kung@rtl.cygnus.com>
1816 * m68k-dis.c: Take out #define BREAK_UP_BIG_DECL kludge, because
1817 gcc memory hog problem with initializer is fixed.
1820 Wed Apr 12 09:04:12 1995 Doug Evans <dje@canuck.cygnus.com>
1822 * arc-opc.c (NULL): Define.
1823 (arc_operands, insn fields u,s): Delete.
1824 (arc_operands, insn fields a,b,c): Mark as signed.
1825 (arc_opcodes): No longer const, links computed at run-time.
1826 (arc_opcodes, mac/mul insns): Breakout suffixes as we don't handle
1827 suffixes that affect the insn code.
1828 (arc_opcodes): Resort table to macros are first.
1829 (arc_opcodes, ld [b,c] entry): Add %Q to prevent shimms.
1830 (arc_opcodes, st [b] entry): Likewise.
1831 (arc_opcodes, st [b,d] entry): Fix mask, value.
1832 (arc_reg_names): Add entries for r29, r30, r31, r60.
1833 (opcode_map, icode_map): New static globals.
1834 (arc_opcode_init_tables): Initialize them.
1835 (arc_opcode_lookup_asm, arc_opcode_lookup_dis): New functions.
1836 (insert_shimmoffset): Signal error if register present.
1838 * arc-dis.c (print_insn): Call arc_opcode_lookup_dis.
1841 Mon Apr 10 15:55:01 1995 Stan Shebs <shebs@andros.cygnus.com>
1843 Merge in support for Mac MPW as a host.
1844 (Old change descriptions retained for informational value.)
1846 * mpw-config.in (archname): Compute from the config.
1847 (BFD_MACHINES, ARCHDEFS): Put into mk.tmp.
1849 * mpw-config.in (target_arch): Compute from canonical target.
1850 (m68k, mips, powerpc, sparc): Add architectures.
1851 * mpw-make.in (disassemble.c.o): Add.
1852 (ALL_CFLAGS): Remove special flags (-mc68020 -mc68881 -model far).
1854 * mpw-config.in (BFD_MACHINES): Set to a default value.
1855 * mpw-make.in (BFD_MACHINES): Remove wired-in value.
1857 * mpw-make.in (CSEARCH): Add extra-include to search path.
1859 * mpw-config.in (varargs.h): Don't create.
1860 (sysdep.h): Create using forward-include.
1861 * mpw-make.in (CSEARCH): Add include/mpw to search path.
1863 * mpw-config.in: New file, MPW version of configure.in.
1864 * mpw-make.in: New file, MPW version of Makefile.in.
1867 Thu Apr 6 20:36:08 1995 Doug Evans <dje@chestnut.cygnus.com>
1869 * arc-dis.c (print_insn): New parameter `big_p'. Callers updated.
1870 Call arc_get_opcode_mach to map bfd mach number to opcode value.
1871 (print_insn_*): Pass bfd mach number, not opcode version.
1872 * arc-opc.c (arc_get_opcode_mach): New function.
1875 Fri Mar 31 14:23:38 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
1877 * alpha-dis.c (print_insn_alpha): Put empty statement after
1880 Tue Mar 21 10:51:40 1995 Jeff Law (law@snake.cs.utah.edu)
1882 * hppa-dis.c (sign_extend): Delete, redundant with libhppa.h version.
1883 (low_sign_extend): Likewise.
1884 (get_field): Delete unused function.
1885 (set_field, deposit_14, deposit_21): Likewise.
1887 Fri Mar 17 15:55:53 1995 J.T. Conklin <jtc@rtl.cygnus.com>
1889 * i386-dis.c: Support for more pentium opcodes. From Guy Harris
1892 Tue Mar 14 00:52:57 1995 Ken Raeburn (raeburn@kr-pc.cygnus.com)
1894 Sat Feb 11 17:22:41 1995 Klaus Kaempf (kkaempf@didymus.rmi.de)
1896 * alpha-opc.h (OSF_ASMCODE): define
1897 print pal-code names as defined in App C of the
1898 Alpha Architecture Reference Manual
1900 * alpha-dis.c: cleaned up output
1901 print stylized code forms as defined in App A.4.3 of the
1902 Alpha Architecture Reference Manual
1904 Wed Mar 8 15:21:14 1995 Ian Lance Taylor <ian@cygnus.com>
1906 * mips-opc.c: Add new mips4 instructions. Don't set INSN_RFE for
1908 * mips-dis.c (print_insn_arg): Handle new argument types 'h', 'R',
1911 Wed Mar 8 02:54:05 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
1913 * m68k-dis.c (opcode): New function. Returns address of opcode
1914 table entry given index, even if the opcode table was split to
1915 work around gcc bugs.
1916 (print_insn_m68k): Call opcode instead of referencing m68k_opcodes
1918 (BREAK_UP_BIG_DECL): Make secondary array static and const.
1919 (reg_names): Now const.
1920 (print_insn_arg): Arrays cacheFieldName and names now const.
1921 (print_indexed): Array scales now const.
1924 Tue Mar 7 21:14:14 1995 Doug Evans <dje@chestnut.cygnus.com>
1926 * arc-dis.c (print_insn_arc_base): Split into big and little fns.
1927 (print_insn_arc_{host,graphics,audio}): Likewise.
1928 (print_insn): Add prototype.
1929 (arc_get_disassembler): New arg `big_p'. Return little or big
1930 print fn accordingly.
1931 * arc-opc.c (arc_opcode_init_tables): Init arc_operand_map once.
1932 (arc_opcode_supported): Use ARC_OPCODE_CPU to ignore byte order.
1933 (arc_opval_supported): Likewise.
1934 * disassemble.c (disassembler): Pass big endian flag to
1935 arc_get_disassembler.
1938 Tue Mar 7 16:41:21 1995 Ian Lance Taylor <ian@cygnus.com>
1940 * ppc-opc.c: Sort recently added instructions by minor opcode
1941 number within major opcode number.
1943 Mon Mar 6 10:04:36 1995 Jeff Law (law@snake.cs.utah.edu)
1945 * hppa-dis.c: Include libhppa.h.
1947 Fri Feb 24 19:15:36 1995 Ian Lance Taylor <ian@cygnus.com>
1949 * mips-opc.c: Change dli to use M_DLI, and add dla.
1951 Mon Feb 20 23:54:38 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1953 * Makefile.in (ALL_MACHINES): Add w65-dis.o.
1956 Fri Feb 17 12:42:25 1995 Doug Evans <dje@chestnut.cygnus.com>
1958 * arc-dis.c (arc_get_disassembler): Change argument to int,
1959 one of bfd_mach_arc_xxx. All callers updated.
1962 Thu Feb 16 17:34:41 1995 Ian Lance Taylor <ian@cygnus.com>
1964 * mips-opc.c: Add r4650 mul instruction.
1966 Wed Feb 15 15:45:20 1995 Ian Lance Taylor <ian@cygnus.com>
1968 * mips-opc.c: Add uld and usd macros for unaligned double load and
1971 Tue Feb 14 13:17:37 1995 Michael Meissner <meissner@tiktok.cygnus.com>
1973 * ppc-opc.c (powerpc_opcodes): Add 403GA opcodes rfci, dccci,
1974 mfdcr, mtdcr, icbt, iccci.
1977 Mon Feb 13 11:09:17 1995 Doug Evans <dje@canuck.cygnus.com>
1979 * arc-dis.c (print_insn): Handle ARC_OPERAND_ADDRESS.
1980 * arc-opc.c (arc_operands): New operand 'J' for jump addresses.
1981 ('L' operand): Mark as ARC_OPERAND_ADDRESS.
1982 (arc_opcodes, j insn): Use 'J' operand type, not 'L'.
1983 (arc_opcodes, ld/st insns): Fix address writeback operand letter.
1984 (insert_absaddr): New function.
1986 Thu Feb 9 19:19:23 1995 Doug Evans <dje@canuck.cygnus.com>
1988 * arc-dis.c (print_insn_arc): Rename to print_insn and make static.
1989 New argument `cpu', pass it to arc_opcode_init_tables.
1990 Document byte order dependencies. Ignore unsupported insns.
1991 (arc_get_disassembler): New function.
1992 (print_insn_arc_base, print_insn_arc_host, print_insn_arc_graphics,
1993 print_insn_arc_audio): New functions.
1994 * arc-opc.c (MULTSHIFT operand): Delete.
1995 (UNSIGNED, SATURATION): New operands.
1996 (mac, mul, mul64, mulu64): New insns.
1997 (ext. asl, asr, lsr, ror): Only available on host and graphics cpus.
1998 (padc, padd, pmov, pand, psbc, psub, swap): New insns.
1999 (host,graphics,audio extended and auxiliary regs): Define.
2000 (ss, sc, mh, ml): New suffixes.
2001 (arc_opcode_supported, arc_opval_supported): New functions.
2002 (insert_multshift, extract_multshift): Deleted.
2003 * disassemble.c (disassembler, case bfd_arch_arc): Call
2004 arc_get_disassembler to get disassembler routine.
2007 Thu Feb 9 12:28:13 1995 Stan Shebs <shebs@andros.cygnus.com>
2009 * i960-dis.c (struct tabent, struct sparse_tabent): Change the
2010 signed char fields to shorts, more portable.
2012 Wed Feb 8 17:29:29 1995 Stan Shebs <shebs@andros.cygnus.com>
2014 * i960-dis.c (struct tabent, struct sparse_tabent): Declare the
2015 char fields as signed chars, since they may have negative values.
2017 Mon Feb 6 10:52:06 1995 J.T. Conklin <jtc@rtl.cygnus.com>
2019 * i386-dis.c (dis386_twobyte): Add cpuid, From Charles Hannum
2020 (mycroft@netbsd.org).
2022 Mon Jan 30 12:38:00 1995 Ian Lance Taylor <ian@cygnus.com>
2024 From "Logg, Ed" <elogg@ea.com>:
2025 * ppc-opc.c (extract_bdm): Correct parenthezisation.
2026 * ppc-dis.c (print_insn_powerpc): Print .long before unrecognized
2029 Thu Jan 26 18:32:08 1995 Ian Lance Taylor <ian@cygnus.com>
2031 * ppc-opc.c: Changes based on patch from David Edelsohn
2032 <edelsohn@mhpcc.edu>.
2033 (powerpc_operands): Add operands SPRBAT and SPRG. Split TBR out of
2036 (insert_tbr): New static function.
2037 (extract_tbr): New static function.
2038 (XFXFXM_MASK, XFXM): Define.
2039 (XSPRBAT_MASK, XSPRG_MASK): Define.
2040 (powerpc_opcodes): Add instructions to access special registers by
2041 name. Add mtcr and mftbu.
2043 Tue Jan 17 10:56:43 1995 Ian Lance Taylor <ian@sanguine.cygnus.com>
2045 * mips-opc.c (P3): Define.
2046 (mips_opcodes): Add mad and madu.
2048 Sun Jan 15 16:32:59 1995 Steve Chamberlain <sac@splat>
2050 * configure.in: Add W65 support.
2051 * disassemble.c: Likewise.
2052 * w65-opc.h, w65-dis.c: New files.
2054 Wed Dec 28 22:15:33 1994 Steve Chamberlain (sac@jonny.cygnus.com)
2056 * h8300-dis.c (bfd_h8_disassemble): Add support for 2 bit
2060 Tue Dec 20 10:36:55 1994 Doug Evans <dje@canuck.cygnus.com>
2062 * arc-dis.c (print_insn_arc): Branch offsets are relative to delay
2064 * arc-opc.c (extract_reladdr): New function.
2065 (insert_reladdr): Store address right-shifted by 2.
2068 Tue Dec 20 11:25:12 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2070 * mips-opc.c: Add dli as a synonym for li.
2073 Mon Dec 19 12:35:51 1994 Doug Evans <dje@canuck.cygnus.com>
2075 * arc-opc.c (insertion fns): Pass pointer to value's table entry.
2077 (extraction fns): Insn argument now array of two words. Return pointer
2078 to value's table entry. All uses changed.
2079 (arc_opcode_lookup_suffix): Exported for arc-dis.c.
2080 (insert_multshift, extract_multshift): New fns.
2081 (arc_operands): Add support for cache bypass suffix. Add support for
2082 predefined aux regs. Modifier bits moved to flags field.
2083 (arc_opcodes): Likewise.
2084 Add mul/mulu/shift insns. Syntax of zero/sign extension insns changed.
2085 New insn rlc. Update to syntax in programmer's manual.
2086 (arc_reg_names): Fix typo in lp_count. Add predefined aux regs.
2087 (arc_suffixes): New synonyms lo,hs for cs,cc. New suffix for cache
2089 (arc_opcode_init_tables): New argument to indicate cpu type.
2090 (insert_reg): Handle predefined aux regs.
2091 (extract_reg): Likewise.
2092 (lookup_register): New fn.
2093 * arc-dis.c (arc_condition_codes): Deleted.
2094 (print_insn_arc): Handle insns with 32 bit immediate constants better.
2095 Clean up modifier handling. Handle predefined aux regs.
2098 Thu Dec 8 18:23:31 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
2100 * alpha-dis.c (print_insn_alpha): Handle call_pal instruction, and
2101 print something for reserved opcode values, even if it won't
2104 * mips-dis.c (_print_insn_mips): When initializing, shift right
2105 and mask, to avoid sign extension problems on the Alpha.
2107 * m68k-dis.c (print_insn_arg, case 'J'): Handle buscr and pcr
2111 Tue Nov 29 18:02:43 1994 Doug Evans <dje@canuck.cygnus.com>
2113 * configure.in: Add ARC support.
2114 * disassemble.c: Likewise.
2115 * arc-dis.c, arc-opc.c: New files.
2118 Wed Nov 23 22:34:51 1994 Steve Chamberlain (sac@jonny.cygnus.com)
2120 * sh-opc.h (mov.l gbr): Get direction right.
2121 * sh-dis.c (print_insn_shx): New function.
2122 (print_insn_shl, print_insn_sh): Call print_insn_shx to
2123 print opcodes with right byte order.
2125 Thu Nov 3 19:32:22 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
2127 * ns32k-dis.c (struct ns32k_option): Renamed from struct option,
2128 to avoid conflicts with getopt.
2130 Mon Oct 31 18:48:10 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2132 * hppa-dis.c (print_insn_hppa): Read the instruction using
2133 bfd_getb32, so that it works on a little endian or 64 bit host.
2134 Remove unused local variable op.
2136 Tue Oct 25 17:07:57 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2138 * mips-opc.c: Use or instead of addu for pseudo-op move, since
2139 addu does not work correctly if -mips3.
2141 Wed Oct 19 13:40:16 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2143 * a29k-dis.c (print_special): Add special register names defined
2144 on 29030, 29040 and 29050.
2145 (print_insn): Handle new operand type 'I'.
2147 Wed Oct 12 11:59:55 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2149 * Makefile.in (INSTALL): Use top level install.sh script.
2151 Wed Oct 5 19:16:29 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2153 * sparc-dis.c: Rewrite to use bitfields, rather than a union, so
2154 that it works on a little endian host.
2156 Tue Oct 4 12:14:21 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2158 * configure.in: Use ${config_shell} when running config.bfd.
2160 Wed Sep 21 18:49:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
2162 * mips-opc.c (mips_opcodes): "dabs" is only available with -mips3.
2164 Thu Sep 15 16:30:22 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
2166 * a29k-dis.c (print_insn): Print the opcode.
2168 Wed Sep 14 17:52:14 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
2170 * mips-opc.c (mips_opcodes): Set WR_t for sc and scd.
2172 Sun Sep 11 22:32:17 1994 Jeff Law (law@snake.cs.utah.edu)
2174 * hppa-dis.c (reg_names): Use r26-r23 for arg0-arg3.
2176 Tue Sep 6 11:37:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
2178 * mips-opc.c: Set INSN_STORE_MEMORY flag for all instructions
2179 which store a value into memory.
2181 Sun Sep 04 17:58:10 1994 Richard Earnshaw (rwe@pegasus.esprit.ec.org)
2183 * configure.in, Makefile.in, disassemble.c: Add support for the ARM.
2184 * arm-dis.c, arm-opc.h: New files.
2186 Fri Aug 5 14:00:05 1994 Stan Shebs (shebs@andros.cygnus.com)
2188 * Makefile.in (ns32k-dis.o): Add dependency.
2189 * ns32k-dis.c (print_insn_arg): Declare initialized local as
2190 string, not as array of chars.
2192 Thu Jul 28 18:14:16 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
2194 * sparc-dis.c (print_insn_sparc): Handle new operand type 'x'.
2196 * sparc-opc.c: Added sparclite extended FP operations, and
2197 versions of v9 impdep* instructions permitting specification of
2200 Tue Jul 26 16:36:03 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
2202 * i960-dis.c (reg_names): Now const.
2203 (struct sparse_tabent): New type, copied from array type in mem
2205 (ctrl): Local static array ctrl_tab now const.
2206 (cobr): Local static array cobr_tab now const.
2207 (mem): Local variables reg1, reg2, reg3 now point to const. Local
2208 static variable mem_tab no longer explicitly initialized. Changed
2209 mem_init to const array of struct sparse_tabent.
2210 (reg): Local static variable reg_tab no longer explicitly
2211 initialized. Changed reg_init to const array of struct
2213 (ea): Local static array scale_tab now const.
2215 * i960-dis.c (reg): Added i960JX instructions to reg_init table.
2218 Tue Jul 19 21:00:00 1994 DJ Delorie (dj@ctron.com)
2220 * configure.bat: the disassember needs to be enabled for
2221 "objdump -d" to work in djgpp.
2223 Wed Jul 13 18:01:58 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
2225 * ns32k-dis.c: Deleted all code in "#ifdef GDB".
2226 (invalid_float): Enabled general version, doesn't require running
2227 on ns32k host. Changed to take char* argument, and test for
2228 explicitly specified sizes, instead of using sizeof() on host CPU
2230 (INVALID_FLOAT): Cast first argument.
2231 (opt_u, opt_U, opt_O, opt_C, opt_S, list_P532, list_M532,
2232 list_P032, list_M032): Now const.
2233 (optlist, list_search): Made appropriate arguments now point to
2235 (print_insn_arg): Changed static array of one-character-string
2236 pointers into a static const array of characters; fixed sprintf
2237 statement accordingly.
2239 Sun Jul 10 00:27:47 1994 Ian Dall (dall@hfrd.dsto.gov.au)
2241 * opcodes/ns32k-dis.c: Semi-new file. Had apparently been dropped
2242 from distribution. A ns32k-dis.c from a previous distribution has
2243 been brought up to date and supports the new interface.
2245 * disassemble.c: define ARCH_ns32k and add case bfd_arch_ns32k.
2247 * configure.in: add bfd_ns32k_arch target support.
2249 * Makefile.in: add ns32k-dis.o to ALL_MACHINES.
2250 Add ns32k-dis.c to CFILES. Add dependencies for ns32k-dis.o.
2252 Wed Jun 29 22:10:37 1994 Steve Chamberlain (sac@cygnus.com)
2254 * h8300-dis.c (bfd_h8_disassemble): Get 16bit branch
2257 Tue Jun 28 13:22:06 1994 Stan Shebs (shebs@andros.cygnus.com)
2259 * h8300-dis.c, mips-dis.c: Don't use true and false.
2261 Thu Jun 23 12:53:19 1994 David J. Mackenzie (djm@rtl.cygnus.com)
2263 * configure.in: Change --with-targets to --enable-targets.
2265 Wed Jun 22 13:38:32 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
2267 * mips-dis.c (_print_insn_mips): Build a static hash table mapping
2268 opcodes to the first instruction with that opcode, to speed
2269 disassembly of large files. From ralphc@pyramid.com (Ralph
2272 Tue Jun 7 12:49:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2274 * Makefile.in (mostlyclean): Fix typo (was mostyclean).
2276 Wed May 11 22:32:00 1994 DJ Delorie (dj@ctron.com)
2278 * configure.bat: update to latest makefile.in
2280 Sat May 7 17:13:21 1994 Steve Chamberlain (sac@cygnus.com)
2282 * a29k-dis.c (print_insn): Print 'x' type operand in hex.
2283 * h8300-dis.c (bfd_h8_disassemble): Print 16bit rels correctly.
2284 * sh-dis.c (print_insn_sh): Don't recur endlessly if delay
2285 slot insn is in a delay slot.
2286 * z8k-opc.h: (resflg): Fix patterns.
2287 * h8500-opc.h Fix CR insn patterns.
2289 Fri May 6 14:34:46 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2291 * ppc-opc.c (powerpc_opcodes): Put PowerPC versions of "cmp" and
2292 "cmpl" before POWER versions, so that gas -many uses them.
2294 Thu Apr 28 18:32:36 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
2296 * disassemble.c: New file.
2297 * Makefile.in (OFILES): Add disassemble.o.
2298 (disassemble.o): Provide dependencies; compile with $(ARCHDEFS).
2299 * configure.in: Define ARCHDEFS in Makefile. Code taken from
2300 binutils/configure.in.
2302 * m68k-dis.c (print_insn_m68k): If F_ALIAS flag is set, skip the
2303 opcode being examined.
2305 Thu Apr 21 17:08:40 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2307 * ppc-opc.c (powerpc_operands): Added RAL, RAM and RAS.
2308 (insert_ral, insert_ram, insert_ras): New functions.
2309 (powerpc_opcodes): Use RAL for load with update, RAM for lmw, and
2310 RAS for store with update.
2312 Sat Apr 16 23:41:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2314 * ppc-opc.c (powerpc_opcodes): Correct fcir. From David Edelsohn
2315 (edelsohn@npac.syr.edu).
2317 Wed Apr 6 17:11:45 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2319 * mips-opc.c (mips_opcodes): Correct operands of "nor" with an
2322 Mon Apr 4 16:30:46 1994 Doug Evans (dje@canuck.cygnus.com)
2324 * sparc-opc.c (sparc_opcodes): Fix "rd %fprs,%l0".
2326 Mon Apr 4 13:22:00 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2328 * ppc-opc.c (powerpc_operands): The signedp field has been
2329 removed, so don't initialize it. Set the PPC_OPERAND_SIGNED flag
2330 instead. Add new operand SISIGNOPT.
2331 (powerpc_opcodes): For lis, liu, addis, and cau use SISIGNOPT.
2332 Based on patch from David Edelsohn (edelsohn@npac.syr.edu).
2333 * ppc-dis.c (print_insn_powerpc): Check PPC_OPERAND_SIGNED rather
2336 Wed Mar 30 00:31:49 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2338 * i386-dis.c (struct private): Renamed to dis_private. `private'
2339 is a reserved word for dynix cc.
2341 Mon Mar 28 13:00:15 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2343 * configure.in: Change error message to refer to bfd/config.bfd
2344 rather than bfd/configure.in.
2346 Mon Mar 28 12:28:30 1994 David Edelsohn (edelsohn@npac.syr.edu)
2348 * ppc-opc.c: Define POWER2 as short alias flag.
2349 (powerpc_opcodes): Add POWER/2 opcodes lfq*, stfq*, fcir[z], and
2352 Wed Mar 23 12:23:05 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2354 * i960-dis.c (print_insn_i960): Don't read a second word for
2355 opcodes 0, 1, 2 and 3.
2357 Wed Mar 16 15:37:58 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2359 * configure.in: Don't build m68881-ext.o for bfd_m68k_arch.
2361 Mon Mar 14 14:53:50 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2363 * m68881-ext.c: Removed; no longer used.
2364 * Makefile.in: Changed accordingly.
2366 * m68k-dis.c (ext_format_68881): Don't declare.
2367 (print_insn_m68k): If an instruction uses place 'i', it uses at
2368 least four fixed bytes.
2369 (print_insn_arg): Don't bump p by 2 for case 'I', place 'i'. For
2370 extended float, convert to double using floatformat_to_double, not
2371 ieee_extended_to_double, and fetch the data before converting it.
2373 Tue Mar 8 18:12:25 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2375 * mips-opc.c: It's sqrt.s, not sqrt.w. From
2376 davidj@ICSI.Berkeley.EDU (David Johnson).
2378 Tue Feb 8 16:55:27 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2380 * ppc-opc.c (powerpc_opcodes): The POWER uses bdn[l][a] where the
2381 PowerPC uses bdnz[l][a].
2383 Tue Feb 8 00:32:28 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2385 * dis-buf.c, i386-dis.c: Include sysdep.h.
2387 Mon Feb 7 19:22:23 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2389 * configure.in (bfd_powerpc_arch): Use ppc-dis.o and ppc-opc.o.
2391 * ppc-opc.c (powerpc_opcodes): Mark POWER instructions supported
2392 by Motorola PowerPC 601 with PPC_OPCODE_601.
2393 * ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc):
2394 Disassemble Motorola PowerPC 601 instructions as well as normal
2395 PowerPC instructions.
2397 Sun Feb 6 07:45:17 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
2399 * i960-dis.c (reg, mem): Just use a static array instead of
2402 Sat Feb 5 00:04:02 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
2404 * hppa-dis.c (print_insn_hppa): For '?' and '@' only adjust the
2405 condition name index if this is for a negated condition.
2407 * hppa-dis.c (print_insn_hppa): No space before 'H' operand.
2408 Floating point format for 'H' operand is backwards from normal
2409 case (0 == double, 1 == single). For '4', '6', '7', '9', and '8'
2410 operands (fmpyadd and fmpysub), handle bizarre register
2411 translation correctly for single precision format.
2413 * hppa-dis.c (print_insn_hppa): Do not emit a space after 'F'
2414 or 'I' operands if the next format specifier is 'M' (fcmp
2415 condition completer).
2417 Feb 4 23:38:03 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2419 * ppc-opc.c (powerpc_operands): New operand type MBE to handle a
2420 single number giving a bitmask for the MB and ME fields of an M
2421 form instruction. Change NB to accept 32, and turn it into 0;
2422 also turn 0 into 32 when disassembling. Seperated SH from NB.
2423 (insert_mbe, extract_mbe): New functions.
2424 (insert_nb, extract_nb): New functions.
2425 (SC_MASK): Mask out SA and LK bits.
2426 (powerpc_opcodes): Change "cal" to use RT, D, RA rather than RT,
2427 RA, SI. Change "liu" and "cau" to use UI rather than SI. Mark
2428 "bctr" and "bctrl" as accepted by POWER. Change "rlwimi",
2429 "rlimi", "rlwimi.", "rlimi.", "rlwinm", "rlinm", "rlwinm.",
2430 "rlinm.", "rlmi", "rlmi.", "rlwnm", "rlnm", "rlwnm.", "rlnm." to
2431 use MBE rather than MB. Add "mfmq" and "mtmq" POWER instructions.
2432 (powerpc_macros): Define table of macro definitions.
2433 (powerpc_num_macros): Define.
2435 * ppc-dis.c (print_insn_powerpc): Don't skip optional operands
2436 if PPC_OPERAND_NEXT is set.
2438 Sat Jan 22 23:10:07 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2440 * i960-dis.c (print_insn_i960): Make buffer bfd_byte instead of
2441 char. Retrieve contents using bfd_getl32 instead of shifting.
2443 Fri Jan 21 19:01:39 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2445 * ppc-opc.c: New file. Opcode table for PowerPC, including
2446 opcodes for POWER (RS/6000).
2447 * ppc-dis.c: New file. PowerPC and Power (RS/6000) disassembler.
2448 * Makefile.in (ALL_MACHINES): Add ppc-dis.o and ppc-opc.o.
2449 (CFILES): Add ppc-dis.c.
2450 (ppc-dis.o, ppc-opc.o): New targets.
2451 * configure.in: Build ppc-dis.o and ppc-opc.o for bfd_rs6000_arch.
2453 Mon Jan 17 20:05:49 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
2455 * hppa-dis.c (print_insn_hppa): Handle 'N' in assembler template.
2456 No space before 'u', 'f', or 'N'.
2458 Sun Jan 16 14:20:16 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
2460 * i386-dis.c (print_insn_i386): Add FIXME comment regarding reading
2461 farther than we should.
2463 * i386-dis.c (dis386): Use Yb and Yv for scasb and scasS.
2465 Thu Jan 6 12:38:05 1994 David J. Mackenzie (djm@thepub.cygnus.com)
2467 * sparc-dis.c m68k-dis.c alpha-dis.c a29k-dis.c: Fix comments.
2469 Wed Jan 5 11:56:21 1994 David J. Mackenzie (djm@thepub.cygnus.com)
2471 * i960-dis.c (print_insn_i960): Only read word2 if the instruction
2472 needs it, to prevent reading past the end of a section.
2474 Wed Nov 17 17:20:12 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2476 * mips-opc.h: Use macro for j instruction, to support SVR4 PIC.
2477 Removed t,A case for la; always use t,A(b) case.
2479 Mon Nov 8 12:37:36 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2481 From Ted Lemen <mellon@pepper.ncd.com>
2482 * mips-dis.c (print_insn_arg): Handle 'k'.
2483 * mips-opc.c: Make cache use k, not t.
2485 Sun Nov 7 23:52:34 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2487 * alpha-opc.h, alpha-dis.c (print_insn_alpha): Add
2488 FLOAT_MEMORY_FORMAT_CODE, FLOAT_BRANCH_FORMAT_CODE, correct
2489 FLOAT_FORMAT_CODE to put out floating point register names.
2491 Mon Nov 1 18:17:51 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2493 * mips-opc.c: Use macros for jal variants, to support SVR4 PIC.
2495 Thu Oct 28 17:42:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2497 * a29k-dis.c (print_insn): Use 0x%08x, not 0x%8x.
2499 Wed Oct 27 11:48:01 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2501 * mips-opc.c (dsll, dsra, dsrl): Added '>' cases for shift counts
2502 larger than 32. Moved dsxx32 variants first for disassembler.
2504 Mon Oct 25 11:33:14 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
2506 * z8kgen.c, z8k-opc.h: Add full lda information.
2508 Tue Oct 19 12:39:25 1993 Jeffrey A Law (law@cs.utah.edu)
2510 * hppa-dis.c (print_insn_hppa): Do not emit a space after
2511 movb instructions. Any necessary space will be emitted by
2512 the code to handle nullification completers.
2514 Wed Oct 13 16:19:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2516 * mips-opc.c: Moved l.d down so that it disassembles as ldc1.
2518 Fri Oct 8 02:34:21 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2520 * alpha-opc.h: Add ldl_l, fix typo for ldq_u.
2521 * alpha-dis.c (print_insn_alpha): Add code for PAL_FORMAT_CODE.
2523 Tue Oct 5 17:47:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2525 * mips-opc.c: Correct lwu opcode value (book had it wrong).
2527 Thu Sep 30 11:26:18 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
2529 * z8k-dis.c (FETCH_DATA): get just the right amount of data.
2530 (unpack_instr): Cope with ARG_IMM4M1 type instructions.
2532 Wed Sep 29 16:24:49 1993 K. Richard Pixley (rich@sendai.cygnus.com)
2534 * m88k-dis.c (m88kdis): comment change. Remove space after
2536 (printop): handle new arg types DEC and XREG for m88110.
2538 Tue Sep 28 19:20:16 1993 Jeffrey A Law (law@snake.cs.utah.edu)
2540 * hppa-dis.c (print_insn_hppa): Handle 'z' operand
2541 type for absolute branch addresses. Delete special
2542 "ble" and "be" code in 'W' operand code.
2544 Fri Sep 24 14:08:33 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2546 * mips-opc.c: Set hazard information correctly for branch
2547 likely instructions.
2549 Fri Sep 17 04:41:17 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2551 * alpha-dis.c (print_insn_alpha), alpha-opc.h: Fix bugs, use
2552 info->fprintf_func for printing and info->print_address_func for
2555 Wed Sep 15 12:12:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2557 * mips-opc.c: Set INSN_TRAP for tXX instructions.
2559 Thu Sep 9 10:11:27 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2561 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson):
2562 Corrected second case of "b" for disassembler.
2564 Tue Sep 7 14:25:15 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2566 * mips-dis.c, m88k-dis.c: Don't include libbfd.h. Changed calls
2567 to BFD swapping routines to correspond to BFD name changes.
2569 Thu Sep 2 10:35:25 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2571 * mips-opc.c: Change div machine instruction to be z,s,t rather
2572 than s,t. Change div macro to be d,v,t rather than d,s,t.
2573 Likewise for divu, ddiv, ddivu. Added z,s,t case for drem, dremu,
2574 rem and remu which generates only the corresponding div
2575 instruction. This is for compatibility with the MIPS assembler,
2576 which only generates the simple machine instruction when an
2577 explicit destination of $0 is used.
2578 * mips-dis.c (print_insn_arg): Handle 'z' (always register zero).
2580 Thu Aug 26 17:41:44 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2582 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Set
2583 WR_31 hazard for bal, bgezal, bltzal.
2585 Thu Aug 26 17:20:02 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
2587 * hppa-dis.c (print_insn_hppa): Use print function
2588 from within the disassemble_info, not fprintf_filtered.
2590 Wed Aug 25 13:51:40 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
2592 * hppa-dis.c (print_insn_hppa): Handle '|' like '>'. (From Jeff
2593 Law, law@cs.utah.edu.)
2595 Mon Aug 23 12:44:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2597 * mips-opc.c ("absu"): Removed.
2600 Fri Aug 20 10:52:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2602 * mips-opc.c: Added r6000 and r4000 instructions and macros.
2603 Changed hazard information to distinguish between memory load
2604 delays and coprocessor load delays.
2606 Wed Aug 18 15:39:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2608 * mips-opc.c: li.d uses "T,L", not "S,F". Added li.s.
2610 Tue Aug 17 09:44:42 1993 David J. Mackenzie (djm@thepub.cygnus.com)
2612 * configure.in: Don't pass cpu to config.bfd.
2614 Tue Aug 17 12:23:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2616 * m88k-dis.c (m88kdis): Make class unsigned.
2618 Thu Aug 12 15:08:18 1993 Ian Lance Taylor (ian@cygnus.com)
2620 * alpha-dis.c (print_insn_alpha): One branch format case was
2621 missing the instruction name.
2623 Wed Aug 11 19:29:39 1993 David J. Mackenzie (djm@thepub.cygnus.com)
2625 * Makefile.in (ALL_MACHINES): Renamed from DIS_LIBS.
2626 Add the arch-specific auxiliary files.
2627 (OFILES): Remove the arch-specific auxiliary files
2628 and use BFD_MACHINES instead of DIS_LIBS.
2629 * configure.in: Set BFD_MACHINES based on --with-targets option.
2631 Thu Aug 12 12:04:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2633 * mips-opc.c: Added lwc1 E,A(b) to go with lwc1 T,A(b). Similarly
2636 Sun Aug 8 15:09:30 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
2638 * sparc-opc.c: Change CONST to const to deal with gcc
2639 -Dconst=__const -traditional.
2641 Fri Aug 6 10:58:55 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2643 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Took
2644 coprocessor instructions out of #if 0, and made them use new
2647 Thu Aug 5 17:11:06 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
2649 * sparc-dis.c: Include ansidecl.h before opcodes/sparc.h.
2651 Fri Jul 30 18:48:15 1993 John Gilmore (gnu@cygnus.com)
2653 * sparc-opc.c: Add F_JSR, F_UNBR, or F_CONDBR flags to each branch
2654 instruction, for use by the disassembler.
2656 * sparc-dis.c (SEX): Add sign extension macro. Replace many
2657 hand-coded sign extensions that depended on 32-bit host ints.
2658 FIXME, we still depend on big-endian host bitfield ordering.
2659 (sparc_print_insn): Set the insn_info_valid field, and the
2660 other fields that describe the instruction being printed.
2662 Tue Jul 27 17:04:58 1993 Jim Wilson (wilson@sphagnum.cygnus.com)
2664 * sparc-opc.c (call): Accept all 6 addressing modes valid for
2665 `jmp' instead of just one of them.
2667 Wed Jul 21 11:43:32 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
2669 * hppa-dis.c: Move floating registers from reg_names to fp_reg_names.
2670 (fput_fp_reg_r): Renamed from fput_reg_r.
2671 (fput_fp_reg): New function.
2672 (print_insn_hppa): Use fput_fp_reg{,_r} where appropriate.
2674 * hppa-dis.c (print_insn_hppa, cases 'a', 'd'): Print space afterwards.
2676 * hppa-dis.c (print_insn_hppa, case 'd'): Use GET_COND not GET_FIELD.
2678 Mon Jul 19 13:52:21 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
2680 * hppa-dis.c (print_insn_hppa): Use extract_5r_store for 'r'.
2682 * hppa-dis.c (print_insn_hppa, case '>'): If next character is 'n',
2683 don't output a space.
2685 * hppa-dis.c (float_format_names): 10 is undefined, and 11 is quad.
2687 Sun Jul 18 16:30:02 1993 Jim Kingdon (kingdon@rtl.cygnus.com)
2689 * mips-opc.c: New file, containing opcode table from
2690 ../include/opcode/mips.h.
2691 * Makefile.in: Add it.
2693 Thu Jul 15 12:37:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2695 * m88k-dis.c: New file, moved in from gdb and changed to use the
2696 new dis-asm.h disassembler interface.
2697 * Makefile.in (DIS_LIBS): Added m88k-dis.o.
2698 (m88k-dis.o): New target.
2700 Tue Jul 13 10:04:16 1993 Ian Lance Taylor (ian@cygnus.com)
2702 * mips-dis.c (print_insn_arg, _print_insn_mips): Made pointer to
2703 argument string const char * to correspond to opcode/mips.h.
2705 Tue Jul 6 15:18:37 1993 Ian Lance Taylor (ian@cygnus.com)
2707 * mips-dis.c: Updated to account for name changes in new version
2709 * Makefile.in: Added header file dependencies.
2711 Sat Jul 3 23:47:56 1993 Doug Evans (dje@canuck.cygnus.com)
2713 * h8300-dis.c (bfd_h8_disassemble): Correct fetching of instruction.
2715 Thu Jul 1 12:23:38 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
2717 * m68k-dis.c (NEXTWORD, NEXTLONG): Use ((x) ^ 0x8000) - 0x8000 to sign
2718 extend, rather than shifts.
2720 Sun Jun 20 20:56:56 1993 Ken Raeburn (raeburn@poseidon.cygnus.com)
2722 * Makefile.in: Undo 15 June change.
2724 Fri Jun 18 14:15:15 1993 Per Bothner (bothner@deneb.cygnus.com)
2726 * m68k-dis.c (print_insn_arg): Change return value to byte count
2728 * m68k-dis.c: Re-write to detect invalid operands before
2729 printing anything, so we can handle this the same way we
2730 handle invalid opcodes.
2732 Thu Jun 17 15:01:36 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
2734 * sh-dis.c, sh-opc.h: Understand some more opcodes.
2736 Wed Jun 16 13:48:05 1993 Ian Lance Taylor (ian@cygnus.com)
2738 * hppa-dis.c: Include <ansidecl.h> and sysdep.h before other
2741 Tue Jun 15 21:45:26 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
2743 * sparc-dis.c: Don't declare qsort, since sysdep.h might.
2745 * configure.in: Do make sysdep.h link.
2746 * Makefile.in: Search ../include. Don't search ../bfd.
2748 Tue Jun 15 13:36:10 1993 Stu Grossman (grossman@cygnus.com)
2750 Changes from Jeff Law, law@cs.utah.edu:
2751 * hppa-dis.c: Fix typo. 'a' and 'd' were reversed.
2752 Do not print a space before the completers specified by
2755 Fri Jun 11 18:40:21 1993 Ken Raeburn (raeburn@cygnus.com)
2757 * mips-dis.c: No longer need to bomb out if HOST_64_BIT is
2758 defined, since gdb has been fixed.
2760 Changes from Jeff Law, law@cs.utah.edu:
2761 * hppa-dis.c (print_insn_hppa): Last argument to fput_reg,
2762 fput_reg_r, fput_creg, fput_const, and fputs_filtered should
2763 be a *disassemble_info, not a *FILE.
2764 * hppa-dis.c: Support 'd', '!', and 'a'.
2765 * hppa-dis.c: Support 's' to extract a 2 bit space register.
2766 * hppa-dis.c: Delete cases which are no longer needed.
2768 Fri Jun 11 07:53:48 1993 Jim Kingdon (kingdon@cygnus.com)
2770 * m68k-dis.c (print_insn_{m68k,arg}): Add MMU codes.
2772 Tue Jun 8 12:25:01 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
2774 * h8300-dis.c: New file, removed from bfd/cpu-h8300.c, with
2777 Mon Jun 7 12:58:49 1993 Per Bothner (bothner@rtl.cygnus.com)
2779 * Makefile.in (CSEARCH): Add -I../bfd for sysdep.h and bfd.h.
2780 * configure.in: No longer need to configure to get sysdep.h.
2782 Thu Jun 3 15:56:49 1993 Stu Grossman (grossman@cygnus.com)
2784 * Patches from Jeffrey Law <law@cs.utah.edu>.
2785 * hppa-dis.c: Support 'I', 'J', and 'K' in output
2786 templates for 1.1 FP computational instructions.
2788 Tue May 25 13:05:48 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
2790 * h8500-dis.c (print_insn_h8500): Address argument is type
2792 * z8k-dis.c (print_insn_z8k, print_insn_z8001, print_insn_z8002):
2795 * h8500-opc.h (addr_class_type): No comma at end of enumerator.
2796 * sh-opc.h (sh_nibble_type, sh_arg_type): Ditto.
2798 * sparc-dis.c (compare_opcodes): Move static declaration to
2801 Fri May 21 14:17:37 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2803 * sparc-dis.c (print_insn_sparc): Implement 'n' argument for unimp
2804 instruction, remove unimp hack from 'l' argument.
2806 Wed May 19 15:35:54 1993 Stu Grossman (grossman@cygnus.com)
2808 * z8k-dis.c (fetch_data): Use unsigned char to make ancient gcc's
2811 Fri May 14 15:22:46 1993 Ian Lance Taylor (ian@cygnus.com)
2813 * Based on patches from davidj@ICSI.Berkeley.EDU (David Johnson):
2814 * mips-dis.c (print_insn_arg): Handle 'C' for general coprocessor
2817 Fri May 14 00:09:14 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
2819 * hppa-dis.c: Include dis-asm.h before sysdep.h. Changed some
2820 arrays of string pointers to 2-d arrays of chars, to save
2823 Thu May 6 20:51:17 1993 Fred Fish (fnf@cygnus.com)
2825 * a29k-dis.c, alpha-dis.c, i960-dis.c, sparc-dis.c, z8k-dis.c:
2826 Cast second arg to read_memory_func to "bfd_byte *", as necessary.
2828 Tue May 4 20:31:10 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
2830 * hppa-dis.c: New file from Utah, adapted to new disassembler
2832 * Makefile.in: Include it.
2834 Mon Apr 26 18:17:42 1993 Steve Chamberlain (sac@thepub.cygnus.com)
2836 * sh-dis.c, sh-opc.h: New files.
2838 Fri Apr 23 18:51:22 1993 Steve Chamberlain (sac@thepub.cygnus.com)
2840 * alpha-dis.c, alpha-opc.h: New files.
2842 Tue Apr 6 12:54:08 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2844 * mips-dis.c: Sign extend 'j' and 'b' arguments, delta is a signed
2847 Mon Apr 5 17:37:37 1993 John Gilmore (gnu@cygnus.com)
2849 * sparc-dis.c: Make "ta" the default trap instruction, "t" the alias.
2851 Fri Apr 2 07:24:27 1993 Ian Lance Taylor (ian@cygnus.com)
2853 * a29k-dis.c, sparc-dis.c, sparc-opc.c: Use CONST rather than
2856 Thu Apr 1 11:20:43 1993 Jim Kingdon (kingdon@cygnus.com)
2858 * sparc-dis.c: Use fprintf_func a few places where I forgot,
2859 and double percent signs a few places.
2861 * a29k-dis.c, i960-dis.c: New, merged from gdb and binutils.
2863 * i386-dis.c, m68k-dis.c, mips-dis.c, sparc-dis.c:
2864 Use info->print_address_func not print_address.
2866 * dis-buf.c (generic_print_address): New function.
2868 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
2870 * Makefile.in: Add sparc-dis.c.
2871 sparc-dis.c: New file, merges binutils and gdb versions as follows:
2873 Add `add' instruction to the set that get checked
2874 for a preceding `sethi' in order to print an absolute address.
2875 * (print_insn): Disassembly prefers real instructions.
2876 (is_delayed_branch): Speed up.
2877 * sparc-opcode.h: Add ALIAS bit to aliases. Fix up opcode tables.
2878 Still missing some float ops, and needs testing.
2879 * sparc-pinsn.c (print_insn): Eliminate 'set' test, subsumed by
2880 F_ALIAS. Use printf, not fprintf, when not passing a file
2882 (compare_opcodes): Check that identical instructions have
2883 identical opcodes, complain otherwise.
2886 * Include reg_names.
2888 Use dis-asm.h/read_memory_func interface.
2890 Wed Mar 31 20:49:06 1993 K. Richard Pixley (rich@rtl.cygnus.com)
2892 * h8500-dis.c, i386-dis.c, m68k-dis.c, z8k-dis.c (fetch_data):
2893 deliberately return non-zero to setjmp from longjmp. Otherwise
2894 this code fails to compile.
2896 Wed Mar 31 17:04:31 1993 Stu Grossman (grossman@cygnus.com)
2898 * m68k-dis.c: Fix prototype for fetch_arg().
2900 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
2902 * dis-buf.c: New file, for new read_memory_func interface.
2903 Makefile.in (OFILES): Include it.
2904 m68k-dis.c, i386-dis.c, h8500-dis.c, mips-dis.c, z8k-dis.c:
2905 Use new read_memory_func interface.
2907 Mon Mar 29 14:02:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
2909 * h8500-dis.c (print_insn_h8500): Get sign of fp offsets right.
2910 * h8500-opc.h: Fix couple of opcodes.
2912 Wed Mar 24 02:03:36 1993 david d `zoo' zuhn (zoo at poseidon.cygnus.com)
2914 * Makefile.in: add dvi & installcheck targets
2916 Mon Mar 22 18:55:04 1993 John Gilmore (gnu@cygnus.com)
2918 * Makefile.in: Update for h8500-dis.c.
2920 Fri Mar 19 14:27:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
2922 * h8500-dis.c, h8500-opc.h: New files
2924 Thu Mar 18 14:12:37 1993 Per Bothner (bothner@rtl.cygnus.com)
2926 * mips-dis.c, z8k-dis.c: Converted to use interface defined in
2927 ../include/dis-asm.h.
2928 * m68k-dis.c: New file (merge of ../binutils/m68k-pinsn.c
2929 and ../gdb/m68k-pinsn.c).
2930 * i386-dis.c: New file (merge of ../binutils/i386-pinsn.c
2931 and ../gdb/i386-pinsn.c).
2932 * m68881-ext.c: New file. Moved definition of
2933 ext_format ext_format_68881 from ../gdb/m68k-tdep.c.
2934 * Makefile.in: Adjust for new files.
2935 * i386-dis.c: Patches from John Hassey (hassey@dg-rtp.dg.com).
2936 * m68k-dis.c: Recognize '9' placement code, so (say) pflush
2937 can be dis-assembled.
2939 Wed Feb 17 09:19:47 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
2941 * mips-dis.c (print_insn_arg): Now returns void.
2943 Mon Jan 11 16:09:16 1993 Fred Fish (fnf@cygnus.com)
2945 * mips-dis.c (ansidecl.h): Include for benefit of sysdep.h
2946 files that use the macros.
2948 Thu Jan 7 13:15:17 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2950 * mips-dis.c: New file, from gdb/mips-pinsn.c.
2951 * Makefile.in (DIS_LIBS): Added mips-dis.o.
2952 (CFILES): Added mips-dis.c.
2954 Thu Jan 7 07:36:33 1993 Steve Chamberlain (sac@thepub.cygnus.com)
2956 * z8k-dis.c (print_insn_z8001, print_insn_z8002): new routines
2957 * z8kgen.c, z8k-opc.h: fix sizes of some shifts.
2959 Tue Dec 22 15:42:44 1992 Per Bothner (bothner@rtl.cygnus.com)
2961 * Makefile.in: Improve *clean rules.
2962 * configure.in: Allow a default host.
2964 Tue Nov 17 19:53:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
2966 * Makefile.in: also use -I$(srcdir)/../bfd, since some sysdep
2967 files include other sysdep files
2969 Thu Nov 12 16:10:37 1992 Steve Chamberlain (sac@thepub.cygnus.com)
2971 * z8k-dis.c z8k-opc.h z8kgen.c: checkpoint
2973 Fri Oct 9 04:56:05 1992 John Gilmore (gnu@cygnus.com)
2975 * configure.in: For host support, use ../bfd/configure.host
2976 so it stays in sync with the ../bfd/hosts database.
2978 Thu Oct 1 23:38:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
2980 * configure.in: use cpu-vendor-os triple instead of nested cases
2982 Wed Sep 30 16:09:20 1992 Michael Werner (mtw@cygnus.com)
2984 * z8k-dis.c (unparse_instr): fix bug where opcode returned was
2985 *always* the wrong one.
2987 Wed Sep 30 07:42:17 1992 Steve Chamberlain (sac@thepub.cygnus.com)
2989 * z8kgen.c: added copyright info
2991 Tue Sep 29 12:20:21 1992 Steve Chamberlain (sac@thepub.cygnus.com)
2993 * z8k-dis.c (unparse_instr): prettier tabs
2994 * z8kgen.c -> z8k-opc.h: bug fixes in tables
2996 Fri Sep 25 12:50:32 1992 Stu Grossman (grossman at cygnus.com)
2998 * configure.in: Add ncr* configuration.
2999 * z8k-dis.c (struct instr_data_s): Make instr_asmsrc char to make
3000 picayune ANSI compilers happy.
3002 Sep 20 08:50:55 1992 Fred Fish (fnf@cygnus.com)
3004 * configure.in (i386): Make i386 and i486 synonymous for now.
3005 * configure.in (i[34]86-*-sysv4): Add my_host definition.
3007 Fri Sep 18 17:01:23 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
3009 * Makefile.in (install): Fix typo.
3011 Fri Sep 18 02:04:24 1992 John Gilmore (gnu@cygnus.com)
3013 * Makefile.in (make): Remove obsolete crud.
3014 (sparc-opc.o): Avoid Sun Make VPATH bug.
3016 Tue Sep 8 17:29:27 1992 K. Richard Pixley (rich@sendai.cygnus.com)
3018 * Makefile.in: since there are no SUBDIRS, remove rule and
3019 references of subdir_do.
3021 Tue Sep 8 17:02:58 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
3023 * Makefile.in (install): Get the library name right here too.
3024 Don't install bfd.h, since it's unrelated to this library. No
3025 subdirs to recurse into, either.
3026 (CFILES): The source file has a .c suffix, not .o.
3028 * sparc-opc.c: New file, moved from BFD.
3029 * Makefile.in (OFILES): Build it.
3031 Thu Sep 3 16:59:20 1992 Michael Werner (mtw@cygnus.com)
3033 * z8k-dis.c: fixed forward refferences of some declarations.
3035 Mon Aug 31 16:09:45 1992 Michael Werner (mtw@cygnus.com)
3037 * Makefile.in: get the name of the library right
3039 Mon Aug 31 13:47:35 1992 Steve Chamberlain (sac@thepub.cygnus.com)
3041 * z8k-dis.c: knows how to disassemble z8k stuff
3042 * z8k-opc.h: new file full of z8000 opcodes
3046 version-control: never
projects / deliverable / binutils-gdb.git / blob