opcodes/ChangeLog

   1 2001-11-09  Richard Sandiford  <rsandifo@redhat.com>
   2
   3         * cgen-asm.c (cgen_parse_keyword): If the keyword is too big to
   4         fit in the buffer, try to match the empty keyword.
   5
   6 2001-11-09  Nick Clifton  <nickc@cambridge.redhat.com>
   7
   8         * cgen-ibld.in (extract_1): Fix badly placed #if 0.
   9         * fr30-ibld.c: Regenerate.
  10         * m32r-ibld.c: Regenerate.
  11         * openrisc-ibld.c: Regenerate.
  12
  13 2001-11-04  Chris Demetriou  <cgd@broadcom.com>
  14
  15         * mips-dis.c (print_insn_mips): Remove spaces at end of line.
  16
  17 2001-11-02  Nick Clifton  <nickc@cambridge.redhat.com>
  18
  19         * configure.in (ALL_LINGUAS): Add "fr", "sv" and "tr".
  20         * configure: Regernate.
  21         * po/fr.po: New file.
  22         * po/sv.po: New file.
  23         * po/tr.po: New file.
  24
  25 2001-11-01  Stephane Carrez  <Stephane.Carrez@worldnet.fr>
  26
  27         * m68hc11-dis.c (print_insn): Fix disassembly of movb with a
  28         constant as source.
  29
  30 2001-10-30  Hans-Peter Nilsson  <hp@bitrange.com>
  31
  32         * Makefile.am (CFILES): Add mmix-dis.c and mmix-opc.c.  Regenerate
  33         dependencies.
  34         * Makefile.in: Regenerate.
  35         * mmix-dis.c, mmix-opc.c: New files.
  36
  37 2001-10-29  Kazu Hirata  <kazu@hxi.com>
  38
  39         * d30v-dis.c: Fix a comment typo.
  40
  41 2001-10-23  Chris Demetriou  <cgd@broadcom.com>
  42
  43         * mips-opc.c (mips_builtin_opcodes): Mark "bgezall" and
  44         "bltzall" as writing GPR 31 (since they do).
  45
  46         * mips-dis.c (print_insn_arg): Calculate info->target
  47         where appropriate.
  48         (print_insn_mips): Fill in instruction info.
  49         (print_mips16_insn_arg): Remove unneded variable 'val'.
  50         Removed duplicated instruction target calculations,
  51         calculate once and print that result.  Use same idiom for
  52         masking the jump segment bits as is used in print_insn_arg.
  53
  54 2001-10-20  Alan Modra  <amodra@bigpond.net.au>
  55
  56         * ppc-opc.c (CT): Make it an optional operand.
  57
  58 2001-10-17  Chris Demetriou  <cgd@broadcom.com>
  59
  60         * mips-dis.c (mips_isa_type): Make the ISA used to disassemble
  61         SB-1 binaries include instructions specific to the SB-1.
  62         * mips-opc.c (SB1): New definition.
  63         (mips_builtin_opcodes): Add SB-1 extension opcodes "div.ps",
  64         "recip.ps", "rsqrt.ps", and "sqrt.ps".
  65
  66 2001-10-17  matthew green  <mrg@redhat.com>
  67
  68         * ppc-opc.c (STRM): New AltiVec operand.
  69         (XDSS): New AltiVec instruction form.
  70         (mtvscr): Correct operand list.
  71         (dst, dstt, dstst, dststt, dss, dssall): AltiVec instructions.
  72
  73 2001-10-17  Alan Modra  <amodra@bigpond.net.au>
  74
  75         * po/POTFILES.in: Regenerate.
  76
  77 2001-10-13  matthew green  <mrg@redhat.com>
  78
  79         * ppc-opc.c (MO): New macro for MO field of mbar instruction.
  80         (powerpc_opcodes): Add rfci, wrtee, wrteei, mfdcrx, mfdcr,
  81         mtdcrx, mtdcr, msync, dcba and mbar as BookE instructions.
  82
  83 2001-10-13  Nick Clifton  <nickc@cambridge.redhat.com>
  84
  85         * cgen-ibld.in: Include safe-ctype.h in preference to
  86         ctype.h.
  87         * cgen-asm.in: Include safe-ctype.h in preference to
  88         ctype.h.  Fix formatting.  Use ISSPACE instead of isspace and
  89         TOLOWER instead of tolower.
  90         (@arch@_cgen_build_insn_regex): Remove duplication of syntax
  91         string elements in constructed regular expression.
  92         * fr30-asm.c: Regenerate.
  93         * fr30-desc.c: Regenerate.
  94         * fr30-ibld.c: Regenerate.
  95         * m32r-asm.c: Regenerate.
  96         * m32r-desc.c: Regenerate.
  97         * m32r-ibld.c: Regenerate.
  98         * openrisc-asm.c: Regenerate.
  99         * openrisc-desc.c: Regenerate.
 100         * openrisc-ibld.c: Regenerate.
 101         * po/opcodes.pot: Regenerate.
 102
 103 2001-10-12  matthew green  <mrg@redhat.com>
 104
 105         * ppc-opc.c (insert_de, extract_de, insert_des, extract_des): New
 106         instruction field instruction/extraction functions for new BookE
 107         DE form instructions.
 108         (CT): New macro for CT field in an X form instruction.
 109         (DE, DES, DEO, DE_MASK): New macros for DE/DES fields in DE form
 110         instructions.
 111         (PPC64): Don't include PPC_OPCODE_PPC.
 112         (403): New opcode macro for PPC403 processors.
 113         (BOOKE): New opcode macro for BookE processors.
 114         (bce, bcel, bcea, bcela, bclre, bclrel: New BookE instructions.
 115         (bcctre, bcctrel, be, bel, bea, bela, icbt, icbte, lwzxe): Likewise.
 116         (dcbste, lwzuxe, luxe, dcbfe, lbzxe, lwarxe, lbzuxe): Likewise.
 117         (stwcxe, stwxe, stxe, stwuxe, stuxe, stbxe, dcbtste, stbuxe): Likewise.
 118         (mfapidi, dcbte, lhzxe, lhzuxe, lhaxe, lhauxe, subfe64): Likewise.
 119         (subfeo64, adde64, addeo64, sthxe, sthuxe, subfze64): Likewise.
 120         (subfzeo64, addze64, addzeo64, dcbie, subfme64, subfmeo64): Likewise.
 121         (addme64, addmeo64, stdcxe., mcrxr64, lwbrxe, lfsxe, lfsuxe): Likewise.
 122         (lfdxe, lfduxe, stwbrxe, stfsxe, stfsuxe, stfdxe, dcbae): Likewise.
 123         (stfduxe, tlbivax, tlbivaxe, lhbrxe, ldxe, lduxe, tlbsx): Likewise.
 124         (tlbsxe, sthbrxe, stdxe, stduxe, icbie, stfiwxe, dcbze, lbze): Likewise.
 125         (lbzue, ldue, lhze, lhzue, lhae, lhaue, lwze, lwzue): Likewise.
 126         (stbe, stbue, sthe, sthue, stwe, stwue, lfse, lfsue, lfde): Likewise.
 127         (lfdue, stde, stdue, stfse, stfsue, stfde, stfdue): Likewise.
 128
 129         * ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc): Look
 130         for a disassembler option of `booke', `booke32' or `booke64' to enable
 131         BookE support in the disassembler.
 132
 133 2001-10-12  John Healy  <jhealy@redhat.com>
 134
 135         * cgen-dis.in (print_insn): Use min (cd->base_insn_bitsize, buflen*8)
 136         for the length when extracting the base part of the insn.
 137
 138 2001-10-09  Bruno Haible  <haible@clisp.cons.org>
 139
 140         * cgen-asm.in (*_cgen_build_insn_regex): Generate a case sensitive
 141         regular expression.  Fix some formatting problems.
 142         * fr30-asm.c: Regenerate.
 143         * openrisc-asm.c: Regenerate.
 144         * m32r-asm.c: Regenerate.
 145
 146 2001-10-09  Christian Groessler <cpg@aladdin.de>
 147
 148         * z8k-dis.c (unparse_instr): Fixed formatting. Change disassembly
 149         of indirect register memory accesses to be same format the
 150         assembler accepts.
 151
 152 2001-10-09  Nick Clifton  <nickc@cambridge.redhat.com>
 153
 154         * sh-opc.h: Fix encoding of least significant nibble of the
 155         DSP single data transfer instructions.
 156
 157         * sh-dis.c (print_insn_shx): Fix decoding of As opcode in DSP
 158         instructions.
 159
 160 2001-10-08  Nick Clifton  <nickc@cambridge.redhat.com>
 161
 162         * cgen-asm.in: Fix compile time warning messages in generated
 163         C files.
 164         * cgen-dis.in: The same.
 165         * cgen-ibld.in: The same.
 166         * fr30-asm.c: Regenerate.
 167         * fr30-desc.c: Regenerate.
 168         * fr30-dis.c: Regenerate.
 169         * fr30-ibld.c: Regenerate.
 170         * fr30-opc.c: Regenerate.
 171         * m32r-asm.c: Regenerate.
 172         * m32r-desc.c: Regenerate.
 173         * m32r-dis.c: Regenerate.
 174         * m32r-ibld.c: Regenerate.
 175         * m32r-opc.c: Regenerate.
 176         * m32r-opinst.c Regenerate.
 177         * openrisc-asm.c: Regenerate.
 178         * openrisc-desc.c: Regenerate.
 179         * openrisc-dis.c: Regenerate.
 180         * openrisc-ibld.c: Regenerate.
 181         * openrisc-opc.c: Regenerate.
 182         * openrisc-opc.h: Regenerate.
 183         * Makefile.in: Regenerate.
 184         * po/POTFILES.in: Regenerate.
 185         * po/opcodes.pot: Regenerate.
 186
 187 2001-10-08  Aldy Hernandez  <aldyh@redhat.com>
 188
 189         * arm-opc.h (arm_opcodes): Add cirrus insns.
 190
 191         * arm-dis.c (print_insn_arm): Add 'I' case.
 192
 193 2001-10-03  Alan Modra  <amodra@bigpond.net.au>
 194
 195         * po/POTFILES.in: Regenerate.
 196         * configure: Regenerate.
 197
 198 2001-10-02  Alan Modra  <amodra@bigpond.net.au>
 199
 200         * Makefile.am (Makefile): Depend on bfd/configure.in.
 201         Run "make dep-am".
 202         * Makefile.in: Regenerate.
 203
 204 2001-09-30  John Healy  <jhealy@redhat.com>
 205
 206         * cgen-ibld.in (insert_1): Switched bfd_get_bits and bfd_set_bits
 207         calls to cgen_get_insn_value and cgen_put_insn_value calls.
 208         (extract_1): Switched bfd_get_bits call to cgen_get_insn_value call.
 209
 210 2001-09-30  Hans-Peter Nilsson  <hp@bitrange.com>
 211
 212         * Makefile.am: Update dependencies with "make dep-am".
 213         * Makefile.in: Regenerate.
 214
 215 2001-09-26  Alan Modra  <amodra@bigpond.net.au>
 216
 217         * arc-dis.c: Formatting fixes.
 218         (my_sprintf): Define using VPARAMS, VA_OPEN, VA_FIXEDARG, VA_CLOSE.
 219
 220 2001-09-21  Bruno Haible  <haible@clisp.cons.org>
 221
 222         * arc-dis.c: Don't include <ctype.h>.
 223         * openrisc-desc.c: Likewise.
 224         * openrisc-ibld.c: Likewise.
 225
 226 2001-09-20  Nick Clifton  <nickc@cambridge.redhat.com>
 227
 228         * fr30-opc.c: Fix compile time warning messages.
 229         * i370-opc.c: Fix compile time warning messages.
 230         * i960-dis.c: Fix compile time warning messages.
 231         * m32r-asm.c: Fix compile time warning messages.
 232         * m32r-desc.c: Fix compile time warning messages.
 233         * m32r-dis.c: Fix compile time warning messages.
 234         * m32r-ibld.c: Fix compile time warning messages.
 235         * m32r-opc.c: Fix compile time warning messages.
 236         * m32r-opinst.c: Fix compile time warning messages.
 237         * ns32k-dis.c: Fix compile time warning messages.
 238         * openrisc-asm.c: Fix compile time warning messages.
 239         * openrisc-desc.c: Fix compile time warning messages.
 240         * openrisc-dis.c: Fix compile time warning messages.
 241         * openrisc-ibld.c: Fix compile time warning messages.
 242         * openrisc-opc.c: Fix compile time warning messages.
 243         * pdp11-dis.c: Fix compile time warning messages.
 244         * tic54x-dis.c: Fix compile time warning messages.
 245         * v850-opc.c: Fix compile time warning messages.
 246         * vax-dis.c: Fix compile time warning messages.
 247         * w65-opc.h: Fix compile time warning messages.
 248         * z8k-opc.h: Fix compile time warning messages.
 249         * z8kgen.c: Fix compile time warning messages.
 250
 251 2001-09-19  Nick Clifton  <nickc@cambridge.redhat.com>
 252
 253         * arm-dis.c:   Fix compile time warning messages.
 254         * cgen-asm.c:  Fix compile time warning messages.
 255         * cgen-dis.c:  Fix compile time warning messages.
 256         * cris-dis.c:  Fix compile time warning messages.
 257         * d10v-dis.c:  Fix compile time warning messages.
 258         * fr30-asm.c:  Fix compile time warning messages.
 259         * fr30-desc.c: Fix compile time warning messages.
 260         * fr30-dis.c:  Fix compile time warning messages.
 261         * fr30-ibld.c: Fix compile time warning messages.
 262
 263 2001-09-18  Bruno Haible  <haible@clisp.cons.org>
 264
 265         * cgen-asm.c: Include "safe-ctype.h" instead of <ctype.h>.
 266         (cgen_parse_keyword): Use ISALNUM instead of isalnum.
 267         * cgen-opc.c: Include "safe-ctype.h" instead of <ctype.h>.
 268         (cgen_keyword_lookup_name): Use ISALPHA/TOLOWER instead of
 269         isalpha/tolower.
 270         (cgen_keyword_add): Use ISALNUM instead of isalnum.
 271         (hash_keyword_name): Use TOLOWER instead of tolower.
 272         * fr30-asm.c: Include "safe-ctype.h" instead of <ctype.h>.
 273         (parse_insn_normal): Use TOLOWER/ISSPACE instead of
 274         tolower/isspace.
 275         (fr30_cgen_assemble_insn): Use ISSPACE instead of isspace.
 276         * fr30-desc.c: Don't include <ctype.h>.
 277         * fr30-ibld.c: Likewise.
 278         * ia64-gen.c: Include "safe-ctype.h" instead of <ctype.h>.
 279         (load_insn_classes, parse_resource_users, load_depfile): Use
 280         ISSPACE instead of isspace.
 281         * m32r-asm.c: Include "safe-ctype.h" instead of <ctype.h>.
 282         (parse_insn_normal): Use TOLOWER/ISSPACE instead of
 283         tolower/isspace.
 284         (m32r_cgen_assemble_insn): Use ISSPACE instead of isspace.
 285         * m32r-desc.c: Don't include <ctype.h>.
 286         * m32r-ibld.c: Likewise.
 287         * openrisc-asm.c: Include "safe-ctype.h" instead of <ctype.h>.
 288         (parse_insn_normal): Use TOLOWER/ISSPACE instead of
 289         tolower/isspace.
 290         (openrisc_cgen_assemble_insn): Use ISSPACE instead of isspace.
 291
 292 2001-09-18  Martin Schwidefsky <schwidefsky@de.ibm.com>
 293
 294         * Makefile.am: Add rules and dependencies to create the s/390 opcode
 295         table out of s390-opc.txt automatically.
 296         * configure.in: Add BFD_CC_FOR_BUILD to allow CC_FOR_BUILD to be used.
 297         * s390-mkopc.c (dumpTable): Change output to create a complete file.
 298         * s390-opc.c: New improved opcode format macros and remove the
 299         pregenerated opcode table.
 300         * s390-opc.txt: Adapt to new improved opcode format macros.
 301
 302 2001-09-14  David Schleef <ds@schleef.org>
 303
 304         * ppc-opc.c (VXA, VXA_MASK): Fix mask bits.
 305
 306 2001-09-04  Alan Modra  <amodra@bigpond.net.au>
 307
 308         * i386-dis.c (grps): Don't print the implicit al/ax/eax register
 309         for opcode 0xf6 or 0xf7 forms of mul, imul, div, idiv insns.
 310
 311 2001-08-31  Eric Christopher  <echristo@redhat.com>
 312             Jason Eckhardt    <jle@redhat.com>
 313
 314         * mips-dis.c: Add support for bfd_mach_mipsisa32 and
 315         bfd_mach_mipsisa64. Remove bfd_mach_mips32, bfd_mach_mips32_4k,
 316         bfd_mach_mips64.
 317
 318 2001-08-31  Andreas Jaeger  <aj@suse.de>
 319
 320         * tic54x-opc.c: Add default initializers to avoid warnings.
 321
 322         * arc-opc.c: Include "sysdep.h" to get stdio.h as include file.
 323         * arc-ext.c: Likewise.
 324
 325 2001-08-28  matthew gren  <mrg@redhat.com>
 326
 327         * ppc-opc.c (icbt): Order correctly.
 328
 329 2001-08-27  David Edelsohn  <dje@watson.ibm.com>
 330             Torbjorn Granlund  <tege@swox.com>
 331
 332         * ppc-opc.c (DS): Add PPC_OPERAND_DS flag.
 333         (LS): Define.
 334         (insert_ds): Complain if not a multiple of 4.
 335         (XSYNC): Define.
 336         (XSYNC_MASK): Define.
 337         (powerpc_opcodes): Add "slbmte", "lwsync", "ptesync", "slbmfev",
 338         "slbmfee".  Modify "sync" to use XSYNC_MASK and LS.
 339
 340 2001-08-26  Andreas Jaeger  <aj@suse.de>
 341
 342         * h8500-opc.h: Add default initializers to h8500_table to shut up
 343         GCC warnings.
 344
 345 2001-08-25  Andreas Jaeger  <aj@suse.de>
 346
 347         * tic54x-dis.c: Add unused attributes where needed.
 348
 349         * z8k-dis.c (output_instr): Add unused attribute.
 350
 351         * h8300-dis.c: Add missing prototypes.
 352         (bfd_h8_disassemble): Make static.
 353
 354         * cris-dis.c: Add missing prototype.
 355         * h8500-dis.c: Likewise.
 356         * m68hc11-dis.c: Likewise.
 357         * pj-dis.c: Likewise.
 358         * tic54x-dis.c: Likewise.
 359         * v850-dis.c: Likewise.
 360         * vax-dis.c: Likewise.
 361         * w65-dis.c: Likewise.
 362         * z8k-dis.c: Likewise.
 363
 364         * d10v-dis.c: Add missing prototype.
 365         (dis_long): Remove unused variable.
 366         (dis_2_short): Likewise.
 367
 368         * sh-dis.c: Add missing prototypes.
 369         * v850-opc.c: Likewise.
 370         Add unused attributes where needed.
 371
 372         * ns32k-dis.c: Add missing prototypes.
 373         (bit_extract_simple): Remove unused variable.
 374
 375 2001-08-23  Martin Schwidefsky  <schwidefsky@de.ibm.com>
 376
 377         * opcodes/s390-opc.c: Add "low or high" and "not low or high"
 378         branch instructions for gcc 3.0.
 379         * opcodes/s390-opc.txt: Likewise.
 380
 381 2001-08-21  Andreas Jaeger  <aj@suse.de>
 382
 383         * i960-dis.c: Add parameters for prototypes
 384         (ctrl): Add unused attributes.
 385         (cobr): Likewise.
 386         (put_abs): Likewise.
 387
 388         * mips-dis.c: Add missing prototypes.
 389         * a29k-dis.c: Likewise.
 390         * arc-dis.c: Likewise.
 391         * ia64-opc.c: Likewise.
 392
 393         * s390-dis.c: Add missing prototypes.
 394         (init_disasm): Remove unused attribute since the parameter is
 395         used.
 396
 397 2001-08-16  Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
 398
 399         * mips-opc.c (M1): Define. Reformatted Code.
 400         (mips_builtin_opcodes): Added performance counter opcodes mfpc, mfps,
 401         mtps, mtps. Typo.
 402
 403 2001-08-16  Jonathan Larmour  <jlarmour@redhat.com>
 404
 405         * mips-opc.c: R3900s can support all branch likely INSN_MACROs where
 406         the corresponding non-likely insn is in MIPS I.
 407
 408 2001-08-13  Kazu Hirata  <kazu@hxi.com>
 409
 410         * mcore-dis.c: Fix formatting.
 411         * mips-dis.c: Likewise.
 412         * pj-dis.c: Likewise.
 413         * z8k-dis.c: Likewise.
 414
 415 2001-08-12  Richard Henderson  <rth@redhat.com>
 416
 417         * cgen-ibld.in (extract_normal): Match type of VALUE and MASK
 418         to *VALUEP.  Regenerate all cgen files.
 419
 420 2001-08-10  Richard Sandiford  <rsandifo@redhat.com>
 421
 422         * mips-dis.c (print_insn_mips): Remove OPCODE_IS_MEMBER's gp32
 423         argument.
 424         * mips-opc.c (G6): Undefine.
 425         (mips_builtin_opcodes): Remove gp32 entry for "move".  Add macro
 426         as the first "move" alternative.
 427
 428 2001-08-10  Andreas Jaeger  <aj@suse.de>
 429
 430         * configure.in: Add -Wstrict-prototypes and -Wmissing-prototypes
 431         to build warnings.
 432         * configure: Regenerate.
 433
 434 2001-08-10  Alan Modra  <amodra@bigpond.net.au>
 435
 436         * ppc-opc.c: Revert 2001-08-08.
 437
 438 2001-08-09  Alan Modra  <amodra@bigpond.net.au>
 439
 440         * dis-buf.c (generic_strcat_address): Add missing prototype.
 441         #if 0 the functions as it is unused.
 442
 443 2001-08-08  Alan Modra  <amodra@bigpond.net.au>
 444
 445         1999-10-25  Torbjorn Granlund  <tege@swox.com>
 446         * ppc-opc.c: Include "bfd.h".
 447         (powerpc_operands): Add new field for reloc type.
 448
 449 2001-07-21  Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
 450
 451         * mips-dis.c (print_insn_arg): Don't use software integer registers
 452         for coprocessor registers.
 453         (get_mips_isa): Removed.
 454         (is_newabi): New function, checks if NewABI is used.
 455         (_print_insn_mips): Get distinction between old ABI and new ABI right.
 456
 457 2001-08-01  Christian Groessler <cpg@aladdin.de>
 458
 459         * z8kgen.c: Fixed indentation of opt[] array.  Include stdio.h to
 460         get stderr definition.
 461         (internal, gas): Removed warnings.
 462         (gas): Create a correct final entry for created array.
 463         * z8k-opc.h: Recreated with new z8kgen.
 464
 465 2001-07-28  Kazu Hirata  <kazu@hxi.com>
 466
 467         * i386-dis.c: Fix formatting.
 468
 469 2001-07-28  Matthias Kramm <kramm@quiss.org>
 470
 471         * i386-dis.c: Change formatting conventions for architecture
 472         i386:intel to better match the format of various intel i386
 473         assemblers, like nasm, tasm or masm.
 474
 475 2001-07-24  Alan Modra  <amodra@bigpond.net.au>
 476
 477         * Makefile.am: Update dependencies with "make dep-am".
 478         * Makefile.in: Regenerate
 479
 480 2001-07-24  Kazu Hirata  <kazu@hxi.com>
 481
 482         * alpha-dis.c: Fix formatting.
 483         * cris-dis.c: Likewise.
 484         * d10v-dis.c: Likewise.
 485         * d30v-dis.c: Likewise.
 486         * m10300-dis.c: Likewise.
 487         * tic54x-dis.c: Likewise.
 488
 489 2001-07-23  Kazu Hirata  <kazu@hxi.com>
 490
 491         * m68k-dis.c: Fix formatting.
 492         * pj-dis.c: Likewise.
 493         * s390-dis.c: Likewise.
 494         * z8k-dis.c: Likewise.
 495
 496 2001-07-21  Chris Demetriou  <cgd@broadcom.com>
 497
 498         * mips-opc.c (mips_builtin_opcodes): Sort c.le.s and c.lt.s
 499         into the rest of the surrounding definitions.
 500
 501 2001-07-18  Alan Modra  <amodra@bigpond.net.au>
 502
 503         * i386-dis.c (grps): Print l or w suffix, and require mem modrm
 504         for lgdt, lidt, sgdt, sidt.
 505
 506 2001-07-13  Philip Blundell  <philb@gnu.org>
 507
 508         * arm-dis.c (print_insn_arm): Use decimal for offsets in LDR/STR.
 509
 510 2001-07-12  Jeff Johnston  <jjohnstn@redhat.com>
 511
 512         * cgen-asm.in: Include "xregex.h" always to enable the libiberty
 513         regex support.
 514         (@arch@_cgen_build_insn_regex): New routine from Graydon.
 515         (@arch@_cgen_assemble_insn): Add Graydon's code to use regex
 516         to verify if it is worth parsing the insn as insn "x".  Also update
 517         error message when insn is not a recognized format of the insn vs
 518         when the insn is completely unrecognized.
 519
 520 2001-07-11  Frank Ch. Eigler  <fche@redhat.com>
 521
 522         * cgen-dis.in (print_insn): Use cgen_get_insn_value instead of
 523         bfd_get_bits.
 524         * cgen-opc.c (cgen_get_insn_value, cgen_put_insn_value): Respect
 525         non-zero CGEN_CPU_DESC->insn_chunk_bitsize.
 526
 527 2001-07-09  Andreas Jaeger  <aj@suse.de>, Karsten Keil <kkeil@suse.de>
 528
 529         * i386-dis.c (set_op): Handle 64 bit and 32 bit mode.
 530         (OP_J): Use bfd_vma for mask to work properly with 64 bits.
 531         (op_address,op_riprel): Use bfd_vma to handle 64 bits.
 532
 533 2001-07-05  Ben Elliston  <bje@redhat.com>
 534
 535         * Makefile.am (CPUDIR): Define.
 536         (stamp-m32r): Update dependencies.
 537         (stamp-fr30): Ditto.
 538         (stamp-openrisc): Ditto.
 539         * Makefile.in: Regenerate.
 540
 541 2001-07-03  Zoltan Hidvegi <hzoli@hzoli.2y.net>
 542
 543         * ppc-opc.c: Fix encoding of 'clf' instruction.
 544
 545 2001-06-30  Geoffrey Keating  <geoffk@redhat.com>
 546
 547         * cgen-ibld.in (insert_normal): Support CGEN_IFLD_SIGN_OPT.
 548
 549 2001-06-28  Geoffrey Keating  <geoffk@redhat.com>
 550
 551         * cgen-asm.c (cgen_parse_keyword): Allow any first character.
 552         * cgen-opc.c (cgen_keyword_add): Ignore special first
 553         character when building nonalpha_chars field.
 554
 555 2001-06-24  Ben Elliston  <bje@redhat.com>
 556
 557         * m88k-dis.c: Format to conform to GNU coding standards.
 558
 559 2001-06-23  Andreas Jaeger  <aj@suse.de>
 560
 561         * disassemble.c (disassembler_usage): Add unused attribute.
 562
 563 2001-06-22  Eric Christopher  <echristo@redhat.com>
 564
 565         * mips-opc.c: Move prefx to start of the table.
 566
 567 2001-06-22  Stacey Sheldon <ssheldon@Catena.com>
 568
 569         * arc-opc.c (insert_st_syntax): Fix over-optimisation of ST
 570         instruction.
 571
 572 2001-06-22  Pauli <pauli@moreton.com.au>
 573
 574         * m68k-opc.c: Add wdebug instruction.
 575
 576 2001-06-15  Aldy Hernandez  <aldyh@redhat.com>
 577
 578         * m10300-opc.c (mn10300_opcodes): Change opcode for AM33 subc.
 579
 580 2001-06-14  Geoffrey Keating  <geoffk@redhat.com>
 581
 582         * cgen-asm.c (cgen_parse_keyword): When looking for the
 583         boundaries of a keyword, allow any special characters
 584         that are actually in one of the allowed keyword.
 585         * cgen-opc.c (cgen_keyword_add): Add any special characters
 586         to the nonalpha_chars field.
 587
 588 2001-06-12  Martin Schwidefsky <schwidefsky@de.ibm.com>
 589
 590         * s390-opc.c: Add lgh instruction.
 591         * s390-opc.txt: Likewise.
 592
 593 2001-06-11  Alan Modra  <amodra@bigpond.net.au>
 594
 595         * i386-dis.c: Group function prototypes in one place.
 596         (FLOATCODE): Redefine as 1.
 597         (USE_GROUPS): Redefine as 2.
 598         (USE_PREFIX_USER_TABLE): Redefine as 3.
 599         (X86_64_SPECIAL): Define as 4.
 600         (GRP1b..GRPAMD): Move USE_GROUPS to bytecode1, index to bytecode2.
 601         (PREGRP0..PREGRP26): Similarly with USE_PREFIX_USER_TABLE.
 602         (dis386_att, dis386_intel, disx86_64_att, disx86_64_intel): Delete.
 603         (dis386): New table combining above four tables.
 604         (dis386_twobyte_att, dis386_twobyte_intel): Delete.
 605         (dis386_twobyte): New table combining above two tables.
 606         (x86_64_table): New table to handle x86_64.
 607         (X86_64_0): Define.
 608         (float_mem_att, float_mem_intel): Delet.
 609         (float_mem): New table combining above two tables.
 610         (print_insn_i386): Modify for above.
 611         (dofloat): Likewise.
 612         (putop): Handle '{', '|' and '}' to select alternative mnemonics.
 613         Return 0 on success, 1 if no valid alternative.
 614         (putop <case 'F'>, <case 'H'>): Print nothing for intel_syntax.
 615         (putop <case 'T'>): Move to case 'U', and share case 'Q' code.
 616         (putop <case 'I'>): Move to case 'T', and share case 'P' code.
 617         (OP_REG <case rAX_reg .. rDI_reg>): Handle as for eAX_reg .. eDI_reg
 618         if not 64-bit mode.
 619         (OP_I <case q_mode>): Handle as for v_mode if not 64-bit mode.
 620         (OP_I64): If not 64-bit mode, call OP_I.
 621         OP_OFF64): If not 64-bit mode, call OP_OFF.
 622         (OP_ST, OP_STi, OP_SEG, OP_DIR, OP_OFF, OP_OFF64, OP_MMX): Rename
 623         'ignore'/'ignored' to 'bytemode'.
 624
 625 2001-06-10  Alan Modra  <amodra@bigpond.net.au>
 626
 627         * configure.in: Sort 'ta' case statement.
 628         * configure: Regenerate.
 629
 630         * i386-dis.c (dis386_att): Add 'H' to conditional branch and
 631         loop,jcxz insns.
 632         (disx86_64_att): Likewise.
 633         (dis386_twobyte_att): Likewise.
 634         (print_insn_i386): Don't print branch hints as a prefix.
 635         (putop): 'H' macro prints branch hints.
 636         (get64): Kill compile warnings.
 637
 638 2001-06-09  Alexandre Oliva  <aoliva@redhat.com>
 639
 640         * sh-opc.h (sh_table): Don't use empty initializers.
 641
 642 2001-06-06  Christian Groessler <cpg@aladdin.de>
 643
 644         * z8k-dis.c: Fix formatting.
 645         (unpack_instr): Remove unused cases in switch statement. Add
 646         safety abort() in default case.
 647         (unparse_instr): Add safety abort() in default case.
 648
 649 2001-06-06  Peter Jakubek <pjak@snafu.de>
 650
 651         * m68k-dis.c (print_insn_m68k): Fix typo.
 652         * m68k-opc.c (m68k_opcodes): Correct allowed operands for
 653         mcf (ColdFire) div, rem and moveb instructions.
 654
 655 2001-06-06  Alan Modra  <amodra@bigpond.net.au>
 656
 657         * i386-dis.c (cond_jump_flag, loop_jcxz_flag): Define.
 658         (cond_jump_mode, loop_jcxz_mode): Define.
 659         (dis386_att): Add cond_jump_flag and loop_jcxz_flag as
 660         appropriate, and 'F' suffix to loop insns.
 661         (disx86_64_att): Likewise.
 662         (dis386_twobyte_att): Likewise.
 663         (print_insn_i386): Don't output addr prefix for loop, jcxz insns.
 664         Output data size prefix for long conditional jumps.  Output cs and
 665         ds branch hints.
 666         (putop): Handle 'F', and mark PREFIX_ADDR used for case 'E'.
 667         (OP_J): Don't make PREFIX_DATA used.
 668
 669 2001-06-04  Alexandre Oliva  <aoliva@redhat.com>
 670
 671         * sh-opc.h (sh_table): Complete last element entry to avoid
 672         compiler warning.
 673
 674 2001-05-16  Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
 675
 676         * mips-dis.c (mips_isa_type): Add MIPS r12k support.
 677
 678 2001-05-23  Alan Modra  <amodra@one.net.au>
 679
 680         * arc-opc.c: Whitespace changes.
 681
 682 2001-05-18  Hans-Peter Nilsson  <hp@axis.com>
 683
 684         * cris-opc.c (cris_spec_regs): Add missing initializer field for
 685         last element.
 686
 687 2001-05-15  Frank Ch. Eigler  <fche@redhat.com>
 688
 689         * cgen-dis.in (extract_normal): Complete support for min<base case.
 690
 691 2001-05-15  Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
 692
 693         * mips-dis.c (INSNLEN): Rename MAXLEN.
 694         (std_reg_names): Replace by mips32_reg_names and mips64_reg_names.
 695         (print_insn_arg): Remove $ prefix of register names.
 696         (set_mips_isa_type): Remove.
 697         (mips_isa_type): New function.
 698         (get_mips_isa): New Function.
 699         (print_insn_mips): Rename _print_insn_mips.
 700         (_print_insn_mips): New function, contains code which was
 701         duplicated in print_insn_big_mips and print_insn_little_mips.
 702         (print_insn_big_mips): Moved code to _print_insn_mips.
 703         (print_insn_little_mips): Likewise.
 704         (print_mips16_insn_arg): Remove $ prefix of register names.
 705         Print error message before abort.
 706
 707 2001-05-14  J.T. Conklin  <jtc@redback.com>
 708
 709         * ppc-opc.c (powerpc_opcodes): Fixed extended opcode field of
 710         simplified mnemonics used for setting PPC750-specific special
 711         purpose registers.
 712
 713 2001-05-12  H.J. Lu  <hjl@gnu.org>
 714
 715         * i386-dis.c (print_insn_i386): Always set `mod', `reg' and
 716         `rm'.
 717
 718 2001-05-12  Peter Targett  <peter.targett@arccores.com>
 719
 720         * arc-opc.c (arc_reg_names): Correct attribute for lp_count
 721         register to r/w.  Formatting fixes throughout file.
 722
 723 2001-05-12  Alan Modra  <amodra@one.net.au>
 724
 725         * i386-dis.c (prefix_user_table): Correct movq2dq, movdq2q, and
 726         movq operands.
 727         (twobyte_has_modrm): Update table.
 728         (need_modrm): Give it file scope.
 729         (MODRM_CHECK): Define.
 730         (dofloat): Use MODRM_CHECK.
 731         (OP_E): Likewise.
 732         (OP_EM): Likewise.
 733         (OP_EX): Likewise.
 734
 735 2001-05-07  Frank Ch. Eigler  <fche@redhat.com>
 736
 737         * cgen-dis.in (default_print_insn): Tolerate min<base instructions
 738         even at end of a section.
 739         * cgen-ibld.in (extract_normal): Tolerate min!=base!=max instructions
 740         by ignoring precariously-unpacked insn_value in favor of raw buffer.
 741
 742 2001-05-03  Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
 743
 744         * disassemble.c (disassembler_usage): Remove unused attribute.
 745
 746 2001-05-04  Frank Ch. Eigler  <fche@redhat.com>
 747
 748         * m32r-dis.c, -asm.c, -ibld.c: Regenerated with disassembler fixes.
 749
 750 2001-05-04  Frank Ch. Eigler  <fche@redhat.com>
 751
 752         * cgen-dis.in (print_insn): Remove call to read_insn.  Instead,
 753         assume incoming buffer already has the base insn loaded.  Handle
 754         smaller-than-base instructions for variable-length case.
 755
 756 2001-05-04  Alan Modra  <amodra@one.net.au>
 757
 758         * i386-dis.c (Ev, Ed): Remove duplicate define.
 759         (Gd): Define.
 760         (XS): Define.
 761         (OP_XS): New function.
 762         (dis386_twobyte_att): Correct pinsrw, pextrw, pmovmskb, and
 763         movmskp operands.
 764         (dis386_twobyte_intel): Likewise.
 765         (prefix_user_table): Use MS for maskmovq operand.
 766
 767 2001-04-27  Johan Rydberg  <jrydberg@opencores.org>
 768
 769         * Makefile.am: Add OpenRISC target.
 770         * Makefile.in: Regenerated.
 771
 772         * disassemble.c (disassembler): Recognize the OpenRISC disassembly.
 773
 774         * configure.in (bfd_openrisc_arch): Add target.
 775         * configure: Regenerated.
 776
 777         * openrisc-asm.c: New file.
 778         * openrisc-desc.c: Likewise.
 779         * openrisc-desc.h: Likewise.
 780         * openrisc-dis.c: Likewise.
 781         * openrisc-ibld.c: Likewise.
 782         * openrisc-opc.c: Likewise.
 783         * openrisc-opc.h: Likewise.
 784
 785 2001-04-24  Christian Groessler  <cpg@aladdin.de>
 786
 787         * z8k-dis.c: add names of control registers (ctrl_names);
 788         (seg_length): provides instruction length fixup for segmented
 789         mode; (unpack_instr): correctly handle ARG_DISP16, ARG_DISP12,
 790         CLASS_0DISP7, CLASS_1DISP7, CLASS_DISP8 and CLASS_PR cases;
 791         (unparse_intr): handle CLASS_PR, print addresses without '#'
 792         * z8k-opc.h: re-created with new z8kgen
 793         * z8kgen.c: merged in fixes which were in existing z8k-opc.h; new
 794         entries for ldctl/ldctlb instruction
 795
 796 2001-04-06  Andreas Jaeger  <aj@suse.de>
 797
 798         * i386-dis.c: Add ffreep instruction.
 799
 800 2001-03-30  Alexandre Oliva  <aoliva@redhat.com>
 801
 802         * ppc-opc.c (insert_mbe): Shift mask initializer as long.
 803
 804 2001-03-24  Alan Modra  <alan@linuxcare.com.au>
 805
 806         * i386-dis.c (PREGRP25): Define.
 807         (dis386_twobyte_att): Use here in place of "movntq" entry.
 808         (dis386_twobyte_intel): Likewise.
 809         (prefix_user_table): Add PREGRP25 entry for "movntq" and "movntdq".
 810         (PREGRP26): Define.
 811         (dis386_twobyte_att): Use here.
 812         (dis386_twobyte_intel): Likewise.
 813         (prefix_user_table): Add PREGRP26 entry for "punpcklqdq".
 814         (prefix_user_table <maskmovdqu>): XM operand, not MX.
 815         (prefix_user_table): Cosmetic changes to "bad" entries.
 816
 817 2001-03-23  Nick Clifton  <nickc@redhat.com>
 818
 819         * mips-opc.c: Remove extraneous whitespace.
 820         * mips-dis.c: Remove extraneous whitespace.
 821
 822 2001-03-22  Ben Elliston  <bje@redhat.com>
 823
 824         * cgen-asm.in (@arch@_cgen_assemble_insn): Move tmp_errmsg
 825         declaration inside CGEN_VERBOSE_ASSEMBLER_ERRORS conditional.
 826         * cgen-ibld.in (put_insn_int_value): Mark cd parameter as unused
 827         to allay a compiler warning.
 828
 829 2001-03-22  Alan Modra  <alan@linuxcare.com.au>
 830
 831         * i386-dis.c (dis386_twobyte_att): Add entries for paddq, psubq.
 832         (dis386_twobyte_intel): Likewise.
 833         (twobyte_has_modrm): Set entry for paddq, psubq.
 834
 835 2001-03-20  Patrick Macdonald  <patrickm@redhat.com>
 836
 837         * cgen-dis.in (print_insn_@arch@): Add support for target machine
 838         determination via CGEN_COMPUTE_MACH.
 839         * fr30-desc.c: Regenerate.
 840         * fr30-dis.c: Regenerate.
 841         * fr30-opc.h: Regenerate.
 842         * m32r-desc.c: Regenerate.
 843         * m32r-dis.c: Regenerate.
 844         * m32r-opc.h: Regenerate.
 845         * m32r-opinst.c: Regenerate.
 846
 847 2001-03-20  H.J. Lu  <hjl@gnu.org>
 848
 849         * configure.in: Remove the redundent AC_ARG_PROGRAM.
 850         * configure: Rebuild.
 851
 852 2001-03-19  Jim Wilson  <wilson@redhat.com>
 853
 854         * ia64-gen.c (fetch_insn_class): If xsect, then ignore comment and
 855         notestr if larger than xsect.
 856         (in_class): Handle format M5.
 857         * ia64-asmtab.c: Regnerate.
 858
 859 2001-03-19  John David Anglin  <dave@hiauly1.hia.nrc.ca>
 860
 861         * vax-dis.c (print_insn_vax): Only fetch two bytes if the info buffer
 862         has more than one byte left to read.
 863
 864 2001-03-16  Martin Schwidefsky  <schwidefsky@de.ibm.com>
 865
 866         * s390-opc.c: Add new opcodes.  Smooth out formatting.
 867         * s390-opc.txt: Add new opcodes.
 868
 869 2001-03-06  Nick Clifton  <nickc@redhat.com>
 870
 871         * arm-dis.c (print_insn_thumb): Compute destination address
 872         of BLX(1) instruction by taking bit 1 from PC and not from bit
 873         0 of the offset.
 874
 875 2001-03-06  Igor Shevlyakov  <igor@windriver.com>
 876
 877         * m68k-dis.c (print_insn_m68k): Recognize Coldfire CPUs
 878         so command line switches will work.
 879
 880 2001-03-05  Dave Brolley  <brolley@redhat.com>
 881
 882         * fr30-asm.c: Regenerate.
 883         * fr30-desc.c: Regenerate.
 884         * fr30-desc.h: Regenerate.
 885         * fr30-dis.c: Regenerate.
 886         * fr30-ibld.c: Regenerate.
 887         * fr30-opc.c: Regenerate.
 888         * fr30-opc.h: Regenerate.
 889         * m32r-asm.c: Regenerate.
 890         * m32r-desc.c: Regenerate.
 891         * m32r-desc.h: Regenerate.
 892         * m32r-dis.c: Regenerate.
 893         * m32r-ibld.c: Regenerate.
 894         * m32r-opc.c: Regenerate.
 895         * m32r-opc.h: Regenerate.
 896         * m32r-opinst.c: Regenerate.
 897
 898 2001-02-28  Igor Shevlyakov  <igor@windriver.com>
 899
 900         * m68k-opc.c: fix cpushl according to Motorola. Enable
 901         bunch of instructions for Coldfire 5407 and add all new.
 902
 903 2001-02-27  Alan Modra  <alan@linuxcare.com.au>
 904
 905         * configure.in (BFD_VERSION): Do without grep.
 906         * configure: Regenerate.
 907         * Makefile.am: Run "make dep-am".
 908         * Makefile.in: Regenerate.
 909
 910 2001-02-23  David Mosberger  <davidm@hpl.hp.com>
 911
 912         * ia64-opc-a.c: Add missing pseudo-ops for "cmp" and "cmp4".
 913         * ia64-asmtab.c: Regenerate.
 914
 915 2001-02-21  David Mosberger  <davidm@hpl.hp.com>
 916
 917         * ia64-opc-d.c (ia64_opcodes_d): Break the "add" pattern into two
 918         separate variants: one for IMM22 and the other for IMM14.
 919         * ia64-asmtab.c: Regenerate.
 920
 921 2001-02-21  Greg McGary  <greg@mcgary.org>
 922
 923         * cgen-opc.c (cgen_get_insn_value): Add missing `return'.
 924
 925 2001-02-20  H.J. Lu  <hjl@gnu.org>
 926
 927         * Makefile.am (ia64-ic.tbl): Remove the target.
 928         (ia64-raw.tbl): Likewise.
 929         (ia64-waw.tbl): Likewise.
 930         (ia64-war.tbl): Likewise.
 931         (ia64-asmtab.c): Generate it in the source directory.
 932         * Makefile.in: Regenerated.
 933
 934 2001-02-18  lars brinkhoff  <lars@nocrew.org>
 935
 936         * Makefile.am: Add PDP-11 target.
 937         * configure.in: Likewise.
 938         * disassemble.c: Likewise.
 939         * pdp11-dis.c: New file.
 940         * pdp11-opc.c: New file.
 941
 942 2001-02-14  Jim Wilson  <wilson@redhat.com>
 943
 944         * ia64-ic.tbl: Update from Intel.  Add setf to fr-writers.
 945         * ia64-asmtab.c: Regenerate.
 946
 947 Mon Feb 12 17:41:26 CET 2001  Jan Hubicka  <jh@suse.cz>
 948
 949         * i386-dis.c (prefix_user_t): Add 'Y' to SSE ineger converison
 950         instructions.
 951         (putop): Handle 'Y'
 952
 953 2001-02-11  Maciej W. Rozycki  <macro@ds2.pg.gda.pl>
 954
 955         * mips-dis.c (print_insn_arg): Use top four bits of the address of
 956         the following instruction not of the jump itself for the jump
 957         target.
 958         (print_mips16_insn_arg): Likewise.
 959
 960 2001-02-11  Michael Sokolov  <msokolov@ivan.Harhan.ORG>
 961
 962         * Makefile.am (stamp-lib): ranlib the libopcodes.a in the build
 963         directory.
 964         * Makefile.in: Regenerate.
 965
 966 2001-02-09  Schwidefsky  <schwidefsky@de.ibm.com>
 967
 968         * Makefile.am: Add linux target for S/390.
 969         * Makefile.in: Likewise.
 970         * configure.in: Likewise.
 971         * disassemble.c: Likewise.
 972         * s390-dis.c: New file.
 973         * s390-mkopc.c: New file.
 974         * s390-opc.c: New file.
 975         * s390-opc.txt: New file.
 976
 977 2001-02-05  Jim Wilson  <wilson@redhat.com>
 978
 979         * ia64-asmtab.c: Revert 2000-12-16 change.
 980
 981 2001-02-02  Patrick Macdonald  <patrickm@redhat.com>
 982
 983         * fr30-desc.h: Regenerate with CGEN_MAX_SYNTAX_ELEMENTS.
 984         * m32r-desc.h: Regenerate.
 985
 986 Thu Feb  1 16:29:06 MET 2001  Jan Hubicka  <jh@suse.cz>
 987
 988         * i386-dis.c (dis386_att, grps): Use 'T' for push/pop
 989         (putop): Handle 'T', alphabetize order, fix 'I' handling in Intel syntax
 990
 991 2001-01-14  Alan Modra  <alan@linuxcare.com.au>
 992
 993         * hppa-dis.c (print_insn_hppa): Handle '>' and '<' arg types.
 994
 995 2001-01-13  Nick Clifton  <nickc@redhat.com>
 996
 997         * disassemble.c: Remove spurious white space.
 998
 999 Sat Jan 13 01:48:24 MET 2001  Jan Hubicka  <jh@suse.cz>
1000
1001         * i386-dis.c (dis386_att, disx86_64_att): Fix ret, lret and iret
1002         templates.
1003
1004 2001-01-11  Peter Targett  <peter.targett@arccores.com>
1005
1006         * configure.in: Add arc-ext.lo for bfd_arc_arch selection.
1007         * Makefile.am (C_FILES): Add arc-ext.c.
1008         (ALL_MACHINES) Add arc-ext.lo.
1009         (INCLUDES) Add opcode directory to list.
1010         New dependency entry for arc-ext.lo.
1011         * disassemble.c (disassembler): Correct call to
1012         arc_get_disassembler.
1013         * arc-opc.c: New update for ARC, including full base
1014         instructions for ARC variants.
1015         * arc-dis.h, arc-dis.c: New update for ARC, including
1016         extensibility functionality.
1017         * arc-ext.h, arc-ext.c: New files for handling extensibility.
1018
1019 2001-01-10  Jan Hubicka  <jh@suse.cz>
1020
1021         * i386-dis.c (PREGRP15 - PREGRP24): New.
1022         (dis386_twobyt): Add SSE2 instructions.
1023         (twobyte_uses_SSE_prefix: Rename from ... ; add new SSE instructions.
1024         (twobyte_uses_f3_prefix): ... this one.
1025         (grps): Add SSE instructions.
1026         (prefix_user_table): Add two new slots; add SSE2 instructions.
1027         (print_insn_i386): Rename uses_f3_prefix to uses_SSE_prefix;
1028         Handle the REPNZ and Data16 prefixes as well; do proper lookup
1029         to prefix_user_table.
1030         (OP_E): Accept mfence and lfence as well.
1031         (OP_MMX): Data16 prefix turns MMX to SSE; support REX extensions.
1032         (OP_XMM): Support REX extensions.
1033         (OP_EM): Likewise.
1034         (OP_EX): Likewise.
1035
1036 2001-01-09  Nick Clifton  <nickc@redhat.com>
1037
1038         * arm-dis.c (print_insn): Set pc to zero for instructions with
1039         a reloc associated with them.
1040
1041 2001-01-09  Jeff Johnston  <jjohnstn@redhat.com>
1042
1043         * cgen-asm.in (parse_insn_normal): Changed syn to be
1044         CGEN_SYNTAX_CHAR_TYPE.  Changed all references to *syn
1045         as character to use CGEN_SYNTAX_CHAR macro and all comparisons
1046         to '\0' to use 0 instead.
1047         * cgen-dis.in (print_insn_normal): Ditto.
1048         * cgen-ibld.in (insert_insn_normal, extract_insn_normal): Ditto.
1049
1050 2001-01-05  Jan Hubicka  <jh@suse.cz>
1051
1052         * i386-dis.c: Add x86_64 support.
1053         (rex): New static variable.
1054         (REX_MODE64, REX_EXTX, REX_EXTY, REX_EXTZ): New constants.
1055         (USED_REX): New macro.
1056         (Ev, Ed, Rm, Iq, Iv64, Cm, Dm, Rm*, Ob64, Ov64): New macros.
1057         (OP_I64, OP_OFF64, OP_IMREG): New functions.
1058         (OP_REG, OP_OFF): Declare.
1059         (get64, get32, get32s): New functions.
1060         (r??_reg): New constants.
1061         (dis386_att): Change templates of instruction implicitly promoted
1062         to 64bit; change e?? to RMe?? for unwind RM byte instructions.
1063         (grps): Likewise.
1064         (dis386_intel): Likewise.
1065         (dixx86_64_att): New table based on dis386_att.
1066         (dixx86_64_intel): New table based on dis386_intel.
1067         (names64, names8rex): New global variable.
1068         (names32, names16): Add extended registers.
1069         (prefix_user_t): Recognize rex prefixes.
1070         (prefix_name): Print REX prefixes nicely.
1071         (op_riprel): New global variable.
1072         (start_pc): Set type to bfd_vma.
1073         (print_insn_i386): Detect the 64bit mode and use proper table;
1074         move ckprefix after initializing the buffer; output unused rex prefixes;
1075         output information about target of RIP relative addresses.
1076         (putop): Support 'O' and 'I'. Update handling of "P', 'Q', 'R' and 'S';
1077         (print_operand_value): New function.
1078         (OP_E, OP_G, OP_REG, OP_I, OP_J, OP_DIR, OP_OFF, OP_D): Add support for
1079         REX prefix and new modes.
1080         (get64, get32s): New.
1081         (get32): Return bfd_signed_vma type.
1082         (set_op): Initialize the op_riprel.
1083         * disassemble.c (disassembler): Recognize the x86-64 disassembly.
1084
1085 2001-01-03  Richard Sandiford  <r.sandiford@redhat.com>
1086
1087          cgen-dis.in (read_insn): Use bfd_get_bits()
1088
1089 2001-01-02  Richard Sandiford  <rsandifo@redhat.com>
1090
1091         * cgen-dis.c (hash_insn_array): Use bfd_put_bits().
1092         (hash_insn_list): Likewise
1093         * cgen-ibld.in (insert_1): Use bfd_put_bits() and bfd_get_bits().
1094         (extract_1): Use bfd_get_bits().
1095         (extract_normal): Apply sign extension to both extraction
1096         methods.
1097         * cgen-opc.c (cgen_get_insn_value): Use bfd_get_bits()
1098         (cgen_put_insn_value): Use bfd_put_bits()
1099
1100 2000-12-28  Frank Ch. Eigler  <fche@redhat.com>
1101
1102         * cgen-asm.in (parse_insn_normal): Print better error message for
1103         instructions with missing operands.
1104
1105 2000-12-21  Santeri Paavolainen <santtu@ssh.com>
1106
1107         * cgen-opc.c: Include alloca.h if HAVE_ALLOCA_H is defined.
1108
1109 2000-12-16  Nick Clifton  <nickc@redhat.com>
1110
1111         * Makefile.in: Regenerate.
1112         * aclocal.m4: Regenerate.
1113         * config.in: Regenerate.
1114         * configure.in: Add spacing.
1115         * configure: Regenerate.
1116         * ia64-asmtab.c: Regenerate.
1117         * po/opcodes.pot: Regenerate.
1118
1119 2000-12-12  Frank Ch. Eigler  <fche@redhat.com>
1120
1121         * cgen-asm.in (@arch@_cgen_assemble_insn): Prefer printing insert-time
1122         error messages over later parse-time ones.
1123
1124 2000-12-12  Jim Wilson  <wilson@redhat.com>
1125
1126         * ia64-dis.c (print_insn_ia64): Cast away const on ia64_free_opcode
1127         argument.
1128         * ia64-gen.c (insert_deplist): Cast sizeof result to int.
1129         (print_dependency_table): Print NULL if semantics field not set.
1130         (insert_opcode_dependencies): Mark cmp parameter as unused.
1131         (print_main_table): Use fprintf_vma to print long long fields.
1132         (main): Mark argv paramter as unused.  Convert to old style definition.
1133         * ia64-opc.c (ia64_find_dependency): Cast sizeof result to int.
1134         * ia64-asmtab.c: Regnerate.
1135
1136 2000-12-09  Nick Clifton  <nickc@redhat.com>
1137
1138         * m32r-dis.c (print_insn): Prevent re-read of instruction from
1139         wrong address.
1140
1141         * fr30-dis.c: Regenerate.
1142
1143 2000-12-08  Peter Targett  <peter.targett@arccores.com>
1144
1145         * configure.in: Add arc-ext.lo for bfd_arc_arch selection.
1146         * Makefile.am (C_FILES): Add arc-ext.c.
1147         (ALL_MACHINES) Add arc-ext.lo.
1148         (INCLUDES) Add opcode directory to list.
1149         New dependency entry for arc-ext.lo.
1150         * disassemble.c (disassembler): Correct call to
1151         arc_get_disassembler.
1152         * arc-opc.c: New update for ARC, including full base
1153         instructions for ARC variants.
1154         * arc-dis.h, arc-dis.c: New update for ARC, including
1155         extensibility functionality.
1156         * arc-ext.h, arc-ext.c: New files for handling extensibility.
1157
1158 2000-12-03  Chris Demetriou   cgd@sibyte.com
1159
1160         * mips-opc.c (mips_builtin_opcodes): Use the WR_HILO, RD_HILO,
1161         MOD_HILO, and MOD_LO macros.
1162
1163         * mips-opc.c (M1, M2): Delete.
1164         (mips_builtin_opcodes): Remove all uses of M1.
1165
1166         * mips-opc.c (mips_builtin_opcodes): Make the dmfc2 and dmtc2
1167         instructions take "G" format second operands and use the
1168         correct flags.
1169         There are mfc3 and mtc3 opcodes, so add dmfc3 and dmtc3 opcodes to
1170         match.
1171         Delete "sel" code operands from mfc1 and mtc1.
1172         Add MIPS64 opcode changes (dclo, dclz), and "sel" code variants
1173         for dm[ft]c[023].
1174
1175 2000-12-03  Ed Satterthwaite  ehs@sibyte.com  and
1176             Chris Demetriou   cgd@sibyte.com
1177
1178         * mips-opc.c (mips_builtin_opcodes): Finish additions
1179         for MIPS32 support, and clean up existing entries for
1180         aesthetics, consistency with the MIPS32 ISA, and
1181         with consistency the rest of the table.
1182
1183 2000-12-01  Nick Clifton  <nickc@redhat.com>
1184
1185         * mips16-opc.c (mips16_opcodes): Add initialiser for membership
1186         field.
1187
1188 2000-12-01  Chris Demetriou <cgd@sibyte.com>
1189
1190         mips-dis.c (print_insn_arg): Handle new 'U' and 'J' argument
1191         specifiers.  Update 'B' for new constant names, and remove
1192         'm'.
1193         mips-opc.c (mips_builtin_opcodes): Place "pref" and "ssnop"
1194         near the top of the array, so they are disassembled properly.
1195         Enable "ssnop" for MIPS32.  Add "break" variant with 20 bit
1196         code for MIPS32.  Update "clo" and "clz" to use 'U' operand
1197         specifier.  Add 'H' format specifier variants for "mfc1,"
1198         "mfc2," "mfc3," "mtc1," "mtc2," and "mtc3" for MIPS32.  Update
1199         MIPS32 "sdbbp" to use 'B' operand specifier.  Add MIPS32
1200         "wait" variant which uses 'J' operand specifier.
1201
1202         * mips-dis.c (set_mips_isa_type): Update to use
1203         CPU_UNKNOWN and ISA_* constants.  Add bfd_mach_mips32 case.
1204         Replace bfd_mach_mips4K with bfd_mach_mips32_4k case.
1205         * mips-opc.c (I32): New constant for instructions added in
1206         MIPS32.
1207         (P4): Delete.
1208         (mips_builtin_opcodes) Replace all uses of P4 with I32.
1209
1210         * mips-dis.c (set_mips_isa_type): Add cases for
1211         bfd_mach_mips5 and bfd_mach_mips64.
1212         * mips-opc.c (I64): New definitions.
1213
1214         * mips-dis.c (set_mips_isa_type): Add case for
1215         bfd_mach_mips_sb1.
1216
1217 2000-11-28  Hans-Peter Nilsson  <hp@bitrange.com>
1218
1219         * sh-dis.c (print_insn_ddt): Make insn_x, insn_y unsigned.
1220         (print_insn_ppi): Make nib1, nib2, nib3 unsigned.
1221         Initialize variable dc to NULL.
1222         (print_insn_shx): Remove unused label d_reg_n.
1223
1224 2000-11-24  Nick Clifton  <nickc@redhat.com>
1225
1226         * arm-opc.h: Add new opcode formatting parameter 'B'.
1227         (arm_opcodes): Add XScale, v5, and v5te instructions.
1228         (thumb_opcodes): Add v5t instructions.
1229
1230         * arm-dis.c (print_insn_arm): Handle new 'B' format
1231         parameter.
1232         (print_insn_thumb): Decode BLX(1) instruction.
1233
1234 2000-11-21  Chris Demetriou  <cgd@sibyte.com>
1235
1236         * mips-opc.c: Fix file header comment.
1237
1238 2000-11-14  Hans-Peter Nilsson  <hp@axis.com>
1239
1240         * cris-dis.c (cris_get_disassembler): If abfd is NULL, return
1241         print_insn_cris_with_register_prefix.
1242
1243 2000-11-11  Alexandre Oliva  <aoliva@redhat.com>
1244
1245         * sh-opc.h: The operand of `mov.w r0, (<disp>,GBR)' is IMM1, not 0.
1246
1247 2000-11-07  Matthew Green  <mrg@redhat.com>
1248
1249         * cgen-dis.in (print_insn): All insns which can fit into insn_value
1250         must be loaded there in their entirety.
1251
1252 2000-10-20  Jakub Jelinek  <jakub@redhat.com>
1253
1254         * sparc-dis.c (v9a_asr_reg_names): Add v9b ASRs.
1255         (compute_arch_mask): Add v8plusb and v9b machines.
1256         (print_insn_sparc): siam mode decoding, accept ASRs up to 25.
1257         * sparc-opc.c: Support for Cheetah instruction set.
1258         (prefetch_table): Add #invalidate.
1259
1260 2000-10-16  Nick Clifton  <nickc@redhat.com>
1261
1262         * mcore-dis.c (imsk): Change mask for OC to 0xFE00.
1263
1264 2000-10-06  Dave Brolley  <brolley@redhat.com>
1265
1266         * fr30-desc.h: Regenerate.
1267         * m32r-desc.h: Regenerate.
1268         * m32r-ibld.c: Regenerate.
1269
1270 2000-10-05  Jim Wilson  <wilson@redhat.com>
1271
1272         * ia64-ic.tbl: Update from Intel.
1273         * ia64-asmtab.c: Regenerate.
1274
1275 2000-10-04  Kazu Hirata  <kazu@hxi.com>
1276
1277         * ia64-gen.c: Convert C++-style comments to C-style comments.
1278         * tic54x-dis.c: Likewise.
1279
1280 2000-09-29  Hans-Peter Nilsson  <hp@axis.com>
1281
1282         Changes to add dollar prefix to registers for files where user symbols
1283         don't have a leading underscore.  Fix formatting.
1284         * cris-dis.c (REGISTER_PREFIX_CHAR): New.
1285         (format_reg): Add parameter with_reg_prefix.  All callers changed.
1286         (print_with_operands): Ditto.
1287         (print_insn_cris_generic): Renamed from print_insn_cris, add
1288         parameter with_reg_prefix.
1289         (print_insn_cris_with_register_prefix,
1290         print_insn_cris_without_register_prefix, cris_get_disassembler):
1291         New.
1292         * disassemble.c (disassembler) [ARCH_cris]: Call cris_get_disassembler.
1293
1294 2000-09-22  Jim Wilson  <wilson@redhat.com>
1295
1296         * ia64-opc-f.c (ia64_opcodes_f): Add fpcmp pseudo-ops for
1297         gt, ge, ngt, and nge.
1298         * ia64-asmtab.c: Regenerate.
1299
1300         * ia64-dis.c (print_insn_ia64): Revert Aug 7 byte skip count change.
1301         * ia64-gen.c (parse_semantics): Handle IA64_DVS_STOP.
1302         (lookup_specifier): Handle "PR%, 1 to 15" and "PR%, 16 to 62".
1303         * ia64-ic.tbl, ia64-raw.tbl, ia64-war.tbl, ia64-waw.tbl: Update.
1304         * ia64-asmtab.c: Regnerate.
1305
1306 2000-09-13  Anders Norlander  <anorland@acc.umu.se>
1307
1308         * mips-opc.c (mips_builtin_opcodes): Support cache instruction on 4K cores.
1309         Add mfc0 and mtc0 with sub-selection values.
1310         Add clo and clz opcodes.
1311         Add msub and msubu instructions for MIPS32.
1312         Add madd/maddu aliases for mad/madu for MIPS32.
1313         Support wait, deret, eret, movn, pref for MIPS32.
1314         Support tlbp, tlbr, tlbwi, tlbwr.
1315         (P4): New define.
1316
1317         * mips-dis.c (print_insn_arg): Print sdbbp 'm' args.
1318         (print_insn_arg): Handle 'H' args.
1319         (set_mips_isa_type): Recognize 4K.
1320         Use CPU_* defines instead of hardcoded numbers.
1321
1322 2000-09-11  Catherine Moore <clm@redhat.com>
1323
1324         * d30v-opc.c (d30v_operand_t): New operand type Rb2.
1325         (d30v_format_tab): Use Rb2 for modinc and moddec.
1326
1327 2000-09-07  Catherine Moore  <clm@redhat.com>
1328
1329         * d30v-opc.c (d30v_format_tab): Use format Ra for
1330         modinc and moddec.
1331
1332 2000-09-06  Alexandre Oliva  <aoliva@redhat.com>
1333
1334         * configure: Rebuilt with new libtool.m4.
1335
1336 2000-09-05  Nick Clifton  <nickc@redhat.com>
1337
1338         * configure: Regenerate.
1339         * po/opcodes.pot: Regenerate.
1340
1341 2000-08-31  Alexandre Oliva  <aoliva@redhat.com>
1342
1343         * acinclude.m4: Include libtool and gettext macros from the
1344         top level.
1345         * aclocal.m4, configure: Rebuilt.
1346
1347 2000-08-30  Kazu Hirata  <kazu@hxi.com>
1348
1349         * tic80-dis.c: Fix formatting.
1350
1351 2000-08-29  Kazu Hirata  <kazu@hxi.com>
1352
1353         * w65-dis.c: Fix formatting.
1354
1355 2000-08-28  Mark Hatle  <mhatle@mvista.com>
1356
1357         * ppc-opc.c: Add XTLB macro for a few PPC 4xx extended mnemonics.
1358         (powerpc_opcodes): Add table entries for PPC 405 instructions.
1359         Changed rfci, icbt, mfdcr, dccci, mtdcr, iccci from PPC to PPC403
1360         instructions.  Added extended mnemonic mftbl as defined in the
1361         405GP manual for all PPCs.
1362
1363 2000-08-28  Jim Wilson  <wilson@redhat.com>
1364
1365         * ia64-dis.c (print_insn_ia64): Add failed label after ia64_free_opcode
1366         call.  Change last goto to use failed instead of done.
1367
1368 2000-08-28  Dave Brolley  <brolley@redhat.com>
1369
1370         * cgen-ibld.in (cgen_put_insn_int_value): New function.
1371         (insert_normal): Allow for non-zero word_offset with CGEN_INT_INSN_P.
1372         (insert_insn_normal): Use cgen_put_insn_int_value with CGEN_INT_INSN_P.
1373         (extract_normal): Allow for non-zero word_offset with CGEN_INT_INSN_P.
1374         * cgen-dis.in (read_insn): New static function.
1375         (print_insn): Use read_insn to read the insn into the buffer and set
1376         up for disassembly.
1377         (print_insn): in CGEN_INT_INSN_P, make sure that the entire insn is
1378         in the buffer.
1379         * fr30-asm.c: Regenerated.
1380         * fr30-desc.c: Regenerated.
1381         * fr30-desc.h: Regenerated.
1382         * fr30-dis.c: Regenerated.
1383         * fr30-ibld.c: Regenerated.
1384         * fr30-opc.c: Regenerated.
1385         * fr30-opc.h: Regenerated.
1386         * m32r-asm.c: Regenerated.
1387         * m32r-desc.c: Regenerated.
1388         * m32r-desc.h: Regenerated.
1389         * m32r-dis.c: Regenerated.
1390         * m32r-ibld.c: Regenerated.
1391         * m32r-opc.c: Regenerated.
1392
1393 2000-08-28  Kazu Hirata  <kazu@hxi.com>
1394
1395         * tic30-dis.c: Fix formatting.
1396
1397 2000-08-27  Kazu Hirata  <kazu@hxi.com>
1398
1399         * sh-dis.c: Fix formatting.
1400
1401 2000-08-24  David Edelsohn  <dje@watson.ibm.com>
1402
1403         * ppc-opc.c (powerpc_opcodes): Add rfid, mtsrd, mtsrdin, mtmsrd.
1404
1405 2000-08-24  Kazu Hirata  <kazu@hxi.com>
1406
1407         * z8k-dis.c: Fix formatting.
1408
1409 2000-08-16  Jim Wilson  <wilson@redhat.com>
1410
1411         * ia64-ic.tbl (pr-readers-nobr-nomovpr): Add addl, adds.  Delete
1412         break, mov-immediate, nop.
1413         * ia64-opc-f.c: Delete fpsub instructions.
1414         * ia64-opc-m.c: Add POSTINC to all instructions with postincrement
1415         address operand.  Rewrite using macros to avoid long lines.
1416         * ia64-opc.h (POSTINC): Define.
1417         * ia64-asmtab.c: Regenerate.
1418
1419 2000-08-15  Jim Wilson  <wilson@redhat.com>
1420
1421         * ia64-ic.tbl: Add missing entries.
1422
1423 2000-08-08  Jason Eckhardt  <jle@redhat.com>
1424
1425         * i860-dis.c (print_br_address): Change third argument from int
1426         to long.
1427
1428 2000-08-07  Richard Henderson  <rth@redhat.com>
1429
1430         * ia64-dis.c (print_insn_ia64): Get byte skip count correct
1431         for MLI templates.  Handle IA64_OPND_TGT64.
1432
1433 2000-08-04  Ben Elliston  <bje@redhat.com>
1434
1435         * cgen-dis.in, cgen-asm.in, cgen-ibld.in: New files.
1436         * cgen.sh: Likewise.
1437
1438 2000-08-02  Jim Wilson  <wilson@redhat.com>
1439
1440         * ia64-dis.c (print_insn_ia64): Call ia64_free_opcode at end.
1441
1442 2000-07-29  Marek Michalkiewicz  <marekm@linux.org.pl>
1443
1444         * avr-dis.c (avr_operand): Use PARAMS macro in declaration.
1445         Change return type from void to int.  Check the combination
1446         of operands, return 1 if valid.  Fix to avoid BUF overflow.
1447         Report undefined combinations of operands in COMMENT.
1448         Report internal errors to stderr.  Output the adiw/sbiw
1449         constant operand in both decimal and hex.
1450         (print_insn_avr): Disassemble ldd/std with displacement of 0
1451         as ld/st.  Check avr_operand () return value, handle invalid
1452         combinations of operands like unknown opcodes.
1453
1454 2000-07-28  Ben Elliston  <bje@redhat.com>
1455
1456         * Makefile.am (CGEN, CGENDEPS, CGENDIR, CGENFLAGS): New.
1457         (run-cgen, stamp-m32r, stamp-fr30): New targets.
1458         * Makefile.in: Regenerate.
1459         * configure.in: Add --enable-cgen-maint option.
1460         * configure: Regenerate.
1461
1462 2000-07-26  Dave Brolley  <brolley@redhat.com>
1463
1464         * cgen-opc.c (cgen_hw_lookup_by_name): 'i' is now unsigned.
1465         (cgen_hw_lookup_by_num): Ditto.
1466         (cgen_operand_lookup_by_name): Ditto.
1467         (print_address): Ditto.
1468         (print_keyword): Ditto.
1469         * cgen-dis.c (hash_insn_array): Mark unused parameters with
1470         ATTRIBUTE_UNUSED.
1471         * cgen-asm.c (hash_insn_array): Mark unused parameters with
1472         ATTRIBUTE_UNUSED.
1473         (cgen_parse_keyword): Ditto.
1474
1475 2000-07-22  Jason Eckhardt  <jle@redhat.com>
1476
1477         * i860-dis.c: New file.
1478         (print_insn_i860): New function.
1479         (print_br_address): New function.
1480         (sign_extend): New function.
1481         (BITWISE_OP): New macro.
1482         (I860_REG_PREFIX): New macro.
1483         (grnames, frnames, crnames): New structures.
1484
1485         * disassemble.c (ARCH_i860): Define.
1486         (disassembler): Add check for bfd_arch_i860 to set disassemble
1487         function to print_insn_i860.
1488
1489         * Makefile.in (CFILES): Added i860-dis.c.
1490         (ALL_MACHINES): Added i860-dis.lo.
1491         (i860-dis.lo): New dependences.
1492
1493         * configure.in: New bits for bfd_i860_arch.
1494
1495         * configure: Regenerated.
1496
1497 2000-07-20  Hans-Peter Nilsson  <hp@axis.com>
1498
1499         * Makefile.am (CFILES): Add cris-dis.c and cris-opc.c.
1500         (ALL_MACHINES): Add cris-dis.lo and cris-opc.lo.
1501         (cris-dis.lo, cris-opc.lo): New rules.
1502         * Makefile.in: Rebuild.
1503         * configure.in (bfd_cris_arch): New target.
1504         * configure: Rebuild.
1505         * disassemble.c (ARCH_cris): Define.
1506         (disassembler): Support ARCH_cris.
1507         * cris-dis.c, cris-opc.c: New files.
1508         * po/POTFILES.in, po/opcodes.pot: Regenerate.
1509
1510 2000-07-11  Jakub Jelinek  <jakub@redhat.com>
1511
1512         * sparc-opc.c (sparc_opcodes): popc has 0 in rs1, not rs2.
1513         Reported by Bill Clarke <llib@computer.org>.
1514
1515 2000-07-09  Geoffrey Keating  <geoffk@redhat.com>
1516
1517         * ppc-opc.c (powerpc_opcodes): Correct suffix for vslw.
1518         Patch by Randall J Fisher <rfisher@ecn.purdue.edu>.
1519
1520 2000-07-09  Alan Modra  <alan@linuxcare.com.au>
1521
1522         * hppa-dis.c (fput_reg, fput_fp_reg, fput_fp_reg_r, fput_creg,
1523         fput_const, extract_3, extract_5_load, extract_5_store,
1524         extract_5r_store, extract_5R_store, extract_10U_store,
1525         extract_5Q_store, extract_11, extract_14, extract_16, extract_21,
1526         extract_12, extract_17, extract_22): Prototype.
1527         (print_insn_hppa): Rename inner block opcode -> opc to avoid
1528         shadowing outer block.
1529         (GET_BIT): Define.
1530
1531 2000-07-05  DJ Delorie  <dj@redhat.com>
1532
1533         * MAINTAINERS: new
1534
1535 2000-07-04  Alexandre Oliva  <aoliva@redhat.com>
1536
1537         * arm-dis.c (print_insn_arm): Output combinations of PSR flags.
1538
1539 2000-07-03  Marek Michalkiewicz  <marekm@linux.org.pl>
1540
1541         * avr-dis.c (avr_operand): Change _ () to _() around all strings
1542         marked for translation (exception from the usual coding style).
1543         (print_insn_avr): Initialize insn2 to avoid warnings.
1544
1545 2000-07-03  Kazu Hirata  <kazu@hxi.com>
1546
1547         * h8300-dis.c (bfd_h8_disassemble): Improve readability.
1548         * h8500-dis.c: Fix formatting.
1549
1550 2000-07-01  Alan Modra  <alan@linuxcare.com.au>
1551
1552         * Makefile.am (DEP): Fix 2000-06-22.  grep after running dep.sed
1553         (CLEANFILES): Add DEPA.
1554         * Makefile.in: Regenerate.
1555
1556 2000-06-26  Scott Bambrough  <scottb@netwinder.org>
1557
1558         * arm-dis.c (regnames): Add an additional register set to match
1559         the set used by GCC.  Make it the default.
1560
1561 2000-06-22  Alan Modra  <alan@linuxcare.com.au>
1562
1563         * Makefile.am (DEP): grep for leading `/' in DEP1, and fail if we
1564         find one.
1565         * Makefile.in: Regenerate.
1566
1567 2000-06-20  H.J. Lu  <hjl@gnu.org>
1568
1569         * Makefile.am: Rebuild dependency.
1570         * Makefile.in: Rebuild.
1571
1572 2000-06-18  Stephane Carrez  <stcarrez@worldnet.fr>
1573
1574         * Makefile.in, configure: regenerate
1575         * disassemble.c (disassembler): Recognize ARCH_m68hc12,
1576         ARCH_m68hc11.
1577         * m68hc11-dis.c (read_memory, print_insn, print_insn_m68hc12):
1578         New functions.
1579         * configure.in: Recognize m68hc12 and m68hc11.
1580         * m68hc11-dis.c, m68hc11-opc.c: New files for support of m68hc1x
1581         * Makefile.am (CFILES, ALL_MACHINES): New files for disassembly
1582         and opcode generation for m68hc11 and m68hc12.
1583
1584 2000-06-16  Nick Duffek  <nsd@redhat.com>
1585
1586         * disassemble.c (disassembler): Refer to the PowerPC 620 using
1587         bfd_mach_ppc_620 instead of 620.
1588
1589 2000-06-12  Kazu Hirata  <kazu@hxi.com>
1590
1591         * h8300-dis.c: Fix formatting.
1592         (bfd_h8_disassemble): Distinguish adds/subs, inc/dec.[wl]
1593         correctly.
1594
1595 2000-06-09  Denis Chertykov  <denisc@overta.ru>
1596
1597         * avr-dis.c (avr_operand): Bugfix for jmp/call address.
1598
1599 2000-06-07  Denis Chertykov  <denisc@overta.ru>
1600
1601         * avr-dis.c: completely rewritten.
1602
1603 2000-06-02  Kazu Hirata  <kazu@hxi.com>
1604
1605         * h8300-dis.c: Follow the GNU coding style.
1606         (bfd_h8_disassemble) Fix a typo.
1607
1608 2000-06-01  Kazu Hirata  <kazu@hxi.com>
1609
1610         * h8300-dis.c (bfd_h8_disassemble_init): Fix a typo.
1611         (bfd_h8_disassemble): Distinguish the operand size of inc/dev.[wl]
1612         correctly.  Fix a typo.
1613
1614 2000-05-31  Nick Clifton  <nickc@redhat.com>
1615
1616         * opintl.h (_(String)): Explain why dgettext is used instead of
1617         gettext.
1618
1619 2000-05-30  Nick Clifton  <nickc@redhat.com>
1620
1621         * opintl.h (gettext, dgettext, dcgettext, textdomain,
1622         bindtextdomain): Replace defines with those from intl/libgettext.h
1623         to quieten gcc warnings.
1624
1625 2000-05-26  Alan Modra  <alan@linuxcare.com.au>
1626
1627         * Makefile.am: Update dependencies with "make dep-am"
1628         * Makefile.in: Regenerate.
1629
1630 2000-05-25  Alexandre Oliva  <aoliva@redhat.com>
1631
1632         * m10300-dis.c (disassemble): Don't assume 32-bit longs when
1633         sign-extending operands.
1634
1635 2000-05-15  Donald Lindsay  <dlindsay@redhat.com>
1636
1637         * d10v-opc.c (d10v_opcodes): add ALONE tag to all short branches
1638         except brf's.
1639
1640 2000-05-21  Nick Clifton  <nickc@redhat.com>
1641
1642         * Makefile.am (LIBIBERTY): Define.
1643
1644 2000-05-19 Diego Novillo <dnovillo@redhat.com>
1645
1646         * mips-dis.c (REGISTER_NAMES): Rename to STD_REGISTER_NAMES.
1647         (STD_REGISTER_NAMES): New name for REGISTER_NAMES.
1648         (reg_names): Rename to std_reg_names. Change it to a char **
1649         static variable.
1650         (std_reg_names): New name for reg_names.
1651         (set_mips_isa_type): Set reg_names to point to std_reg_names by
1652         default.
1653
1654 2000-05-16  Frank Ch. Eigler  <fche@redhat.com>
1655
1656         * fr30-desc.h: Partially regenerated to account for changed
1657         CGEN_MAX_* -> CGEN_ACTUAL_MAX_* macros.
1658         * m32r-desc.h: Ditto.
1659
1660 2000-05-15  Nick Clifton  <nickc@redhat.com>
1661
1662         * arm-opc.h: Use upper case for flasg in MSR and MRS
1663         instructions.  Allow any bit to be set in the field_mask of
1664         the MSR instruction.
1665
1666         * arm-dis.c (print_insn_arm): Decode _x and _s bits of the
1667         field_mask of an MSR instruction.
1668
1669 2000-05-11  Thomas de Lellis  <tdel@windriver.com>
1670
1671         * arm-opc.h: Disassembly of thumb ldsb/ldsh
1672         instructions changed to ldrsb/ldrsh.
1673
1674 2000-05-11  Ulf Carlsson  <ulfc@engr.sgi.com>
1675
1676         * mips-dis.c (print_insn_arg): Don't mask top 32 bits of 64-bit
1677         target addresses for 'jal' and 'j'.
1678
1679 2000-05-10  Geoff Keating  <geoffk@redhat.com>
1680
1681         * ppc-opc.c (powerpc_opcodes): Make the predicted-branch opcodes
1682         also available in common mode when powerpc syntax is being used.
1683
1684 2000-05-08  Alan Modra  <alan@linuxcare.com.au>
1685
1686         * m68k-dis.c (dummy_printer): Add ATTRIBUTE_UNUSED to args.
1687         (dummy_print_address): Ditto.
1688
1689 2000-05-04  Timothy Wall  <twall@redhat.com>
1690
1691         * tic54x-opc.c: New.
1692         * tic54x-dis.c: New.
1693         * disassemble.c (disassembler): Add ARCH_tic54x.
1694         * configure.in: Added tic54x target.
1695         * configure: Ditto.
1696         * Makefile.am: Add tic54x dependencies.
1697         * Makefile.in: Ditto.
1698
1699 2000-05-03  J.T. Conklin  <jtc@redback.com>
1700
1701         * ppc-opc.c (VA, VB, VC, VD, VS, SIMM, UIMM, SHB): New macros, for
1702         vector unit operands.
1703         (VX, VX_MASK, VXA, VXA_MASK, VXR, VXR_MASK): New macros, for vector
1704         unit instruction formats.
1705         (PPCVEC): New macro, mask for vector instructions.
1706         (powerpc_operands): Add table entries for above operand types.
1707         (powerpc_opcodes): Add table entries for vector instructions.
1708
1709         * ppc-dis.c (print_insn_big_powerpc): Add PPC_OPCODE_ALTIVEC to mask.
1710         (print_insn_little_powerpc): Likewise.
1711         (print_insn_powerpc): Prepend 'v' when printing vector registers.
1712
1713 2000-04-24  Clinton Popetz  <cpopetz@redhat.com>
1714
1715         * configure.in: Add bfd_powerpc_64_arch.
1716         * disassemble.c (disassembler): Use print_insn_big_powerpc for
1717         64 bit code.
1718
1719 2000-04-24  Nick Clifton  <nickc@redhat.com>
1720
1721         * fr30-desc.c (fr30_cgen_cpu_open): Initialise signed_overflow
1722         field.
1723
1724 2000-04-23  Denis Chertykov  <denisc@overta.ru>
1725
1726         * avr-dis.c (reg_fmul_d): New. Extract destination register from
1727         FMUL instruction.
1728         (reg_fmul_r): New. Extract source register from FMUL instruction.
1729         (reg_muls_d): New. Extract destination register from MULS instruction.
1730         (reg_muls_r): New. Extract source register from MULS instruction.
1731         (reg_movw_d): New. Extract destination register from MOVW instruction.
1732         (reg_movw_r): New. Extract source register from MOVW instruction.
1733         (print_insn_avr): Handle MOVW, MULS, MULSU, FMUL, FMULS, FMULSU,
1734         EICALL, EIJMP, LPM r,Z, ELPM r,Z, SPM, ESPM instructions.
1735
1736 2000-04-22  Timothy Wall  <twall@redhat.com>
1737
1738         * ia64-gen.c (general): Add an ordered table of primary
1739         opcode names, as well as priority fields to disassembly data
1740         structures to enforce a preferred disassembly format based on the
1741         ordering of the opcode tables.
1742         (load_insn_classes): Show a useful message if IC tables are missing.
1743         (load_depfile): Ditto.
1744         * ia64-asmtab.h (struct ia64_dis_names ): Add priority flag to
1745         distinguish preferred disassembly.
1746         * ia64-opc-f.c: Reorder some insn for preferred disassembly
1747         format.  Fix incorrect flag on fma.s/fma.s.s0.
1748         * ia64-opc.c: Scan *all* disassembly matches and use the one with
1749         the highest priority.
1750         * ia64-opc-b.c: Use more abbreviations.
1751         * ia64-asmtab.c: Regenerate.
1752
1753 2000-04-21  Jason Eckhardt  <jle@redhat.com>
1754
1755         * hppa-dis.c (extract_16): New function.
1756         (print_insn_hppa): Fix incorrect handling of 'fe'. Added handling of
1757         new operand types l,y,&,fe,fE,fx.
1758
1759 2000-04-21  Richard Henderson  <rth@redhat.com>
1760             David Mosberger  <davidm@hpl.hp.com>
1761             Timothy Wall <twall@redhat.com>
1762             Bob Manson  <manson@charmed.cygnus.com>
1763             Jim Wilson  <wilson@redhat.com>
1764
1765         * Makefile.am (HFILES): Add ia64-asmtab.h, ia64-opc.h.
1766         (CFILES): Add ia64-dis.c, ia64-opc-a.c, ia64-opc-b.c, ia64-opc-f.c,
1767         ia64-opc-i.c, ia64-opc-m.c, ia64-opc-d.c, ia64-opc.c, ia64-gen.c,
1768         ia64-asmtab.c.
1769         (ALL_MACHINES): Add ia64-dis.lo, ia64-opc.lo.
1770         (ia64-ic.tbl, ia64-raw.tbl, ia64-waw.tbl, ia64-war.tbl, ia64-gen,
1771         ia64-gen.o, ia64-asmtab.c, ia64-dis.lo, ia64-opc.lo): New rules.
1772         * Makefile.in: Rebuild.
1773         * configure Rebuild.
1774         * configure.in (bfd_ia64_arch): New target.
1775         * disassemble.c (ARCH_ia64): Define.
1776         (disassembler): Support ARCH_ia64.
1777         * ia64-asmtab.c, ia64-asmtab.h, ia64-dis.c, ia64-gen.c ia64-ic.tbl,
1778         ia64-opc-a.c, ia64-opc-b.c, ia64-opc-d.c ia64-opc-f.c, ia64-opc-i.c,
1779         ia64-opc-m.c, ia64-opc-x.c, ia64-opc.c, ia64-opc.h, ia64-raw.tbl,
1780         ia64-war.tbl, ia64-waw.tbl: New files.
1781
1782 2000-04-20  Alexandre Oliva  <aoliva@redhat.com>
1783
1784         * m10300-dis.c (HAVE_AM30, HAVE_AM33): Define.
1785         (disassemble): Use them.
1786
1787 2000-04-14  Alan Modra  <alan@linuxcare.com.au>
1788
1789         * sysdep.h: Include "ansidecl.h" not <ansidecl.h>
1790         * Makefile.am: Update dependencies.
1791         * Makefile.in: Regenerate.
1792
1793 2000-04-14  Michael Sokolov  <msokolov@ivan.Harhan.ORG>
1794
1795         * a29k-dis.c, alpha-dis.c, alpha-opc.c, arc-dis.c, arc-opc.c,
1796         avr-dis.c, d10v-dis.c, d10v-opc.c, d30v-dis.c, d30v-opc.c,
1797         disassemble.c, h8300-dis.c, h8500-dis.c, hppa-dis.c, i370-dis.c,
1798         i370-opc.c, i960-dis.c, m10200-dis.c, m10200-opc.c, m10300-dis.c,
1799         m10300-opc.c, m68k-dis.c, m68k-opc.c, m88k-dis.c, mcore-dis.c,
1800         mips-dis.c, mips-opc.c, mips16-opc.c, pj-dis.c, pj-opc.c,
1801         ppc-dis.c, ppc-opc.c, sh-dis.c, sparc-dis.c, sparc-opc.c,
1802         tic80-dis.c, tic80-opc.c, v850-dis.c, v850-opc.c, vax-dis.c,
1803         w65-dis.c, z8k-dis.c, z8kgen.c: Include sysdep.h.  Remove
1804         ansidecl.h as sysdep.h includes it.
1805
1806 2000-04-7  Andrew Cagney  <cagney@b1.redhat.com>
1807
1808         * configure.in (WARN_CFLAGS): Set to -W -Wall by default.  Add
1809         --enable-build-warnings option.
1810         * Makefile.am (AM_CFLAGS, WARN_CFLAGS): Add definitions.
1811         * Makefile.in, configure: Re-generate.
1812
1813 2000-04-05  J"orn Rennecke <amylaar@redhat.com>
1814
1815         * sh-opc.h (sh_table): Use A_DISP_PC / PCRELIMM_8BY2 for ldre & ldrs.
1816         stc GBR,@-<REG_N> is available for arch_sh1_up.
1817         Group parallel processing insn with identical mnemonics together.
1818         Make three-operand psha / pshl come first.
1819
1820 2000-04-05  J"orn Rennecke <amylaar@redhat.co.uk>
1821
1822         * sh-opc.h (sh_nibble_type): Remove DISP_8 and DISP_4.
1823         Split IMM_[48]{,BY[24]} into IMM[01]_[48]{,BY[24]}.  Add REPEAT.
1824         (sh_arg_type): Add A_PC.
1825         (sh_table): Update entries using immediates.  Add repeat.
1826         * sh-dis.c (print_insn_shx): Remove DISP_8 and DISP_4.
1827         Split IMM_[48]{,BY[24]} into IMM[01]_[48]{,BY[24]}.  Add REPEAT.
1828
1829 2000-04-04  Alan Modra  <alan@linuxcare.com.au>
1830
1831         * po/opcodes.pot: Regenerate.
1832
1833         * Makefile.am (MKDEP): Use gcc -MM rather than mkdep.
1834         (DEP): Quote when passing vars to sub-make.  Add warning message
1835         to end.
1836         (DEP1): Rewrite for "gcc -MM".
1837         (CLEANFILES): Add DEP2.
1838         Update dependencies.
1839         * Makefile.in: Regenerate.
1840
1841 2000-04-03  Denis Chertykov  <denisc@overta.ru>
1842
1843         * avr-dis.c: Syntax cleanup.
1844         (add0fff): Print the pc relative address as a signed number.
1845         (add03f8): Likewise.
1846
1847 2000-04-01  Ian Lance Taylor  <ian@zembu.com>
1848
1849         * disassemble.c (disassembler_usage): Don't use a prototype.  Mark
1850         the parameter ATTRIBUTE_UNUSED.
1851         * ppc-opc.c: Add ATTRIBUTE_UNUSED as needed.
1852
1853 2000-04-01  Alexandre Oliva  <aoliva@redhat.com>
1854
1855         * m10300-opc.c: SP-based offsets are always unsigned.
1856
1857 2000-03-29  Thomas de Lellis  <tdel@windriver.com>
1858
1859         * arm-opc.h (thumb_opcodes): Disassemble 0xde.. to "bal"
1860         [branch always] instead of "undefined".
1861
1862 2000-03-27  Nick Clifton  <nickc@redhat.com>
1863
1864         * d30v-opc.c (d30v_format_table): Move SHORT_AR to end of list of
1865         short instructions, from end of list of long instructions.
1866
1867 2000-03-27  Ian Lance Taylor  <ian@zembu.com>
1868
1869         * Makefile.am (CFILES): Add avr-dis.c.
1870         (ALL_MACHINES): Add avr-dis.lo.
1871
1872 2000-03-27  Alan Modra  <alan@linuxcare.com>
1873
1874         * avr-dis.c (add0fff, add03f8): Don't use structure bitfields to
1875         truncate integers.
1876         (print_insn_avr): Call function via pointer in K&R compatible way.
1877         (dispLDD, regPP, reg50, reg104, reg40, reg20w, lit404, lit204,
1878         add0fff, add03f8): Convert to old style function declaration and
1879         add prototype.
1880         (avrdis_opcode): Add prototype.
1881
1882 2000-03-27  Denis Chertykov  <denisc@overta.ru>
1883
1884         * avr-dis.c: New file.  AVR disassembler.
1885         * configure.in (bfd_avr_arch): New architecture support.
1886         * disassemble.c: Likewise.
1887         * configure: Regenerate.
1888
1889 2000-03-06  J"oern Rennecke <amylaar@redhat.com>
1890
1891         * sh-opc.h (sh_table): ldre and ldrs have a *signed* displacement.
1892
1893 2000-03-02  J"orn Rennecke <amylaar@redhat.co.uk>
1894
1895         * d30v-dis.c (print_insn): Remove d*i hacks.  Use per-operand
1896         flag to determine if operand is pc-relative.
1897         * d30v-opc.c:
1898         (d30v_format_table):
1899         (REL6S3): Renamed from IMM6S3.
1900         Added flag OPERAND_PCREL.
1901         (REL12S3, REL18S3, REL32): Split from IMM12S3, IMM18S3, REL32, with
1902         added flag OPERAND_PCREL.
1903         (IMM12S3U): Replaced with REL12S3.
1904         (SHORT_D2, LONG_D): Delay target is pc-relative.
1905         (SHORT_B2r, SHORT_B3r, SHORT_B3br, SHORT_D2r, LONG_Ur, LONG_2r):
1906         Split from SHORT_B2, SHORT_D2, SHORT_B3b, SHORT_D2, LONG_U, LONG_2r,
1907         using the REL* operands.
1908         (LONG_2br, LONG_Dr): Likewise, from LONG_2b, LONG_D.
1909         (SHORT_D1r, SHORT_D2Br, LONG_Dbr): Renamed from SHORT_D1, SHORT_D2B,
1910         LONG_Db, using REL* operands.
1911         (SHORT_U, SHORT_A5S): Removed stray alternatives.
1912         (d30v_opcode_table): Use new *r formats.
1913
1914 2000-02-28  Nick Clifton  <nickc@redhat.com>
1915
1916         * m32r-desc.c (m32r_cgen_cpu_open): Replace 'flags' with
1917         'signed_overflow_ok_p'.
1918
1919 2000-02-27  Eli Zaretskii  <eliz@is.elta.co.il>
1920
1921         * Makefile.am (stamp-lib): Use $(LIBTOOL) --config to get the
1922         name of the libtool directory.
1923         * Makefile.in: Rebuild.
1924
1925 2000-02-24  Nick Clifton  <nickc@redhat.com>
1926
1927         * cgen-opc.c (cgen_set_signed_overflow_ok): New function.
1928         (cgen_clear_signed_overflow_ok): New function.
1929         (cgen_signed_overflow_ok_p): New function.
1930
1931 2000-02-23  Andrew Haley  <aph@redhat.com>
1932
1933         * m32r-asm.c, m32r-desc.c, m32r-desc.h, m32r-dis.c,
1934         m32r-ibld.c, m32r-opc.h: Rebuild.
1935
1936 2000-02-23  Linas Vepstas <linas@linas.org>
1937
1938         * i370-dis.c, i370-opc.c: New.
1939
1940         * disassemble.c (ARCH_i370): Define.
1941         (disassembler): Handle it.
1942
1943         * Makefile.am: Add support for Linux/IBM 370.
1944         * configure.in: Likewise.
1945
1946         * Makefile.in: Regenerate.
1947         * configure: Likewise.
1948
1949 2000-02-22  Chandra Chavva   <cchavva@redhat.com>
1950
1951         * d30v-opc.c (d30v_opcode_tab) : Added FLAG_NOT_WITH_ADDSUBppp to
1952         ST2H, STB, STH, STHH, STW and ST2H opcodes to prohibit parallel
1953         procedure.
1954
1955 2000-02-22  Andrew Haley  <aph@redhat.com>
1956
1957         * mips-dis.c (_print_insn_mips): New arg for OPCODE_IS_MEMBER:
1958         force gp32 to zero.
1959         * mips-opc.c (G6): New define.
1960         (mips_builtin_op): Add "move" definition for -gp32.
1961
1962 2000-02-22  Ian Lance Taylor  <ian@zembu.com>
1963
1964         From Grant Erickson <gerickso@Brocade.COM>:
1965         * ppc-opc.c: Correct dcread--it takes 3 arguments, not 2.
1966
1967 2000-02-21  Alan Modra  <alan@spri.levels.unisa.edu.au>
1968
1969         * dis-buf.c (buffer_read_memory): Change `length' param and all int
1970         vars to unsigned.
1971
1972 2000-02-17 J"orn Rennecke <amylaar@redhat.co.uk>
1973
1974         * sh-dis.c (print_movxy, print_insn_ddt, print_dsp_reg): New functions.
1975         (print_insn_ppi): Likewise.
1976         (print_insn_shx): Use info->mach to select appropriate insn set.
1977         Add support for sh-dsp.  Remove FD_REG_N support.
1978         * sh-opc.h (sh_nibble_type): Add new values for sh-dsp support.
1979         (sh_arg_type): Likewise.  Remove FD_REG_N.
1980         (sh_dsp_reg_nums): New enum.
1981         (arch_sh1, arch_sh2, arch_sh3, arch_sh3e, arch_sh4): New macros.
1982         (arch_sh_dsp, arch_sh3_dsp, arch_sh1_up, arch_sh2_up): Likewise.
1983         (arch_sh3_up, arch_sh3e_up, arch_sh4_up, arch_sh_dsp_up): Likewise.
1984         (arch_sh3_dsp_up): Likewise.
1985         (sh_opcode_info): New field: arch.
1986         (sh_table): Split up insn with FD_REG_N into ones with F_REG_N and
1987         D_REG_N.  Fill in arch field.  Add sh-dsp insns.
1988
1989 2000-02-14  Fernando Nasser  <fnasser@totem.to.redhat.com>
1990
1991         * arm-dis.c: Change flavor name from atpcs-special to
1992         special-atpcs to prevent name conflict in gdb.
1993         (get_arm_regname_num_options, set_arm_regname_option,
1994         get_arm_regnames): New functions.  API to access the several
1995         flavor of register names.  Note: Used by gdb.
1996         (print_insn_thumb): Use the register name entry from the currently
1997         selected flavor for LR and PC.
1998
1999 2000-02-10  Nick Clifton  <nickc@redhat.com>
2000
2001         * mcore-opc.h (enum mcore_opclass): Add MULSH and OPSR
2002         classes.
2003         (mcore_table): Add "idly4", "psrclr", "psrset", "mulsh" and
2004         "mulsh.h" instructions.
2005         * mcore-dis.c (imsk array): Add masks for MULSH and OPSR
2006         classes.
2007         (print_insn_mcore): Add support for little endian targets.
2008         Add support for MULSH and OPSR classes.
2009
2010 2000-02-07  Nick Clifton  <nickc@redhat.com>
2011
2012         * arm-dis.c (parse_arm_diassembler_option): Rename again.
2013         Previous delat did not take.
2014
2015 2000-02-03  Timothy Wall  <twall@redhat.com>
2016
2017         * dis-buf.c (buffer_read_memory):  Use octets_per_byte field
2018         to adjust target address bounds checking and calculate the
2019         appropriate octet offset into data.
2020
2021 2000-01-27  Nick Clifton  <nickc@redhat.com>
2022
2023         * arm-dis.c: (parse_disassembler_option): Rename to
2024         parse_arm_disassembler_option and allow to be exported.
2025
2026         * disassemble.c (disassembler_usage): New function: Print out any
2027         target specific disassembler options.
2028         Call arm_disassembler_options() if the ARM architecture is being
2029         supported.
2030
2031         * arm-dis.c (NUM_ELEM): Define this macro if not already
2032         defined.
2033         (arm_regname): New struct type for ARM register names.
2034         (arm_toggle_regnames): Delete.
2035         (parse_disassembler_option): Use register name structure.
2036         (print_insn): New function: Combines duplicate code found in
2037         print_insn_big_arm and print_insn_little_arm.
2038         (print_insn_big_arm): Call print_insn.
2039         (print_insn_little_arm): Call print_insn.
2040         (print_arm_disassembler_options): Display list of supported,
2041         ARM specific disassembler options.
2042
2043 2000-01-27  Thomas de Lellis  <tdel@windriver.com>
2044
2045         * arm-dis.c (printf_insn_big_arm): Treat ELF symbols with the
2046         ARM_STT_16BIT flag as Thumb code symbols.
2047
2048         * arm-dis.c (printf_insn_little_arm): Ditto.
2049
2050 2000-01-25  Thomas de Lellis  <tdel@windriver.com>
2051
2052         * arm-dis.c (printf_insn_thumb): Prevent double dumping
2053         of raw thumb instructions.
2054
2055 2000-01-20  Nick Clifton  <nickc@redhat.com>
2056
2057         * mcore-opc.h (mcore_table): Add "add" as an alias for "addu".
2058
2059 2000-01-03  Nick Clifton  <nickc@cygnus.com>
2060
2061         * arm-dis.c (streq): New macro.
2062         (strneq): New macro.
2063         (force_thumb): ew local variable.
2064         (parse_disassembler_option): New function: Parse a single, ARM
2065         specific disassembler command line switch.
2066         (parse_disassembler_option): Call parse_disassembler_option to
2067         parse individual command line switches.
2068         (print_insn_big_arm): Check force_thumb.
2069         (print_insn_little_arm): Check force_thumb.
2070
2071 For older changes see ChangeLog-9899
2072 \f
2073 Local Variables:
2074 mode: change-log
2075 left-margin: 8
2076 fill-column: 74
2077 version-control: never
2078 End: