1 Thu Oct 10 10:25:58 1996 Jeffrey A Law (law@cygnus.com)
3 * mn10300-opc.c (FMT*): Remove definitions.
5 * mn10300-opc.c (mn10300_opcodes): Fix destination register
6 for shift-by-register opcodes.
8 * mn10300-opc.c (mn10300_operands): Break DN, DM, AN, AM
9 into [AD][MN][01] for encoding the position of the register
12 Wed Oct 9 11:19:26 1996 Jeffrey A Law (law@cygnus.com)
14 * mn10300-opc.c (mn10300_opcodes): Add "extended" instructions,
15 "putx", "getx", "mulq", "mulqu", "sat16", "sat24", "bsch".
17 Tue Oct 8 11:55:35 1996 Jeffrey A Law (law@cygnus.com)
19 * mn10300-opc.c (mn10300_operands): Remove "REGS" operand.
20 Fix various typos. Add "PAREN" operand.
22 (mn10300_opcodes): Surround all memory addresses with "PAREN"
23 operands. Fix several typos.
25 * mn10300-opc.c (mn10300_opcodes): Fix typos in yesterday's
28 Mon Oct 7 16:48:45 1996 Jeffrey A Law (law@cygnus.com)
30 * mn10300-opc.c (FMT_XX): Renumber starting at one.
31 (mn10300_operands): Rough cut. Enough to parse "mov" instructions
33 (mn10300_opcodes): Break opcode format out into its own field.
34 Update many operand fields to deal with signed vs unsigned
35 issues. Fix one or two typos in the "mov" instruction
36 opcode, mask and/or operand fields.
38 Mon Oct 7 11:39:49 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
40 * m68k-opc.c (plusha): Prefer encoding for m68040up, in case
43 Thu Oct 3 17:17:02 1996 Ian Lance Taylor <ian@cygnus.com>
45 * mn10300-opc.c (mn10300_opcodes): Add opcode & masks for
46 all opcodes. Very rough cut at operands for all opcodes.
48 * mn10300-opc.c (mn10300_opcodes): Start fleshing out the
51 Thu Oct 3 10:06:07 1996 Jeffrey A Law (law@cygnus.com)
53 * mn10200-opc.c, mn10300-opc.c: New files.
54 * mn10200-dis.c, mn10300-dis.c: New files.
55 * mn10x00-opc.c, mn10x00-dis.c: Deleted.
56 * disassemble.c: Break mn10x00 support into 10200 and 10300
58 * configure.in: Likewise.
61 Thu Oct 3 15:59:12 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
63 * Makefile.in (MOSTLYCLEAN): Move config.log to distclean.
65 Wed Oct 2 23:28:42 1996 Jeffrey A Law (law@cygnus.com)
67 * mn10x00-opc.c, mn10x00-dis.c: New files for Matsushita
69 * disassemble (ARCH_mn10x00): Define.
70 (disassembler): Handle bfd_arch_mn10x00.
71 * configure.in: Recognize bfd_mn10x00_arch.
74 Tue Oct 1 10:49:11 1996 Ian Lance Taylor <ian@cygnus.com>
76 * i386-dis.c (op_rtn): Change to be a pointer. Adjust uses
77 accordingly. Don't declare functions using op_rtn.
80 Fri Sep 27 18:28:59 1996 Stu Grossman (grossman@critters.cygnus.com)
82 * v850-dis.c (disassemble): Add memaddr argument. Re-arrange
83 params to be more standard.
84 * (disassemble): Print absolute addresses and symbolic names for
85 branch and jump targets.
86 * v850-opc.c (v850_operand): Add displacement flag to 9 and 22
88 * (v850_opcodes): Add breakpoint insn.
91 Mon Sep 23 12:32:26 1996 Ian Lance Taylor <ian@cygnus.com>
93 * m68k-opc.c: Move the fmovemx data register cases before the
94 other cases, so that they get recognized before the data register
95 does gets treated as a degenerate register list.
97 Tue Sep 17 12:06:51 1996 Ian Lance Taylor <ian@cygnus.com>
99 * mips-opc.c: Add a case for "div" and "divu" with two registers
100 and a destination of $0.
102 Tue Sep 10 16:12:39 1996 Fred Fish <fnf@rtl.cygnus.com>
104 * mips-dis.c (print_insn_arg): Add prototype.
105 (_print_insn_mips): Ditto.
107 Mon Sep 9 14:26:26 1996 Ian Lance Taylor <ian@cygnus.com>
109 * mips-dis.c (print_insn_arg): Print condition code registers as
112 Tue Sep 3 12:09:46 1996 Doug Evans <dje@canuck.cygnus.com>
114 * sparc-opc.c (sparc_opcodes): Add setuw, setsw, setx.
117 Tue Sep 3 12:05:25 1996 Jeffrey A Law (law@cygnus.com)
119 * v850-dis.c (disassemble): Make static. Provide prototype.
121 Sun Sep 1 22:30:40 1996 Jeffrey A Law (law@cygnus.com)
123 * v850-opc.c (insert_d9, insert_d22): Fix boundary case
126 Sat Aug 31 01:27:26 1996 Jeffrey A Law (law@cygnus.com)
128 * v850-dis.c (disassemble): Handle insertion of ',', '[' and
129 ']' characters into the output stream.
130 * v850-opc.c (v850_opcodes: Remove size field from all opcodes.
131 Add "memop" field to all opcodes (for the disassembler).
132 Reorder opcodes so that "nop" comes before "mov" and "jr"
135 * v850-dis.c (print_insn_v850): Fix typo in last change.
137 * v850-dis.c (print_insn_v850): Properly handle disassembling
138 a two byte insn at the end of a memory region when the memory
139 region's size is only two byte aligned.
141 * v850-dis.c (v850_cc_names): Fix stupid thinkos.
143 * v850-dis.c (v850_reg_names): Define.
144 (v850_sreg_names, v850_cc_names): Likewise.
145 (disassemble): Very rough cut at printing operands (unformatted).
147 * v850-opc.c (BOP_MASK): Fix.
148 (v850_opcodes): Fix mask for jarl and jr.
150 * v850-dis.c: New file. Skeleton for disassembler support.
151 * Makefile.in Remove v850 references, they're not needed here
152 and they weren't being sanitized away.
153 * configure.in: Add v850-dis.o when building v850 toolchains.
154 * configure: Rebuilt.
155 * disassemble.c (disassembler): Call v850 disassembler.
157 * v850-opc.c (insert_d8_7, extract_d8_7): New functions.
158 (insert_d8_6, extract_d8_6): New functions.
159 (v850_operands): Rename D7S to D7; operand for D7 is unsigned.
160 Rename D8 to D8_7, use {insert,extract}_d8_7 routines.
162 (IF4A, IF4B): Use "D7" instead of "D7S".
163 (IF4C, IF4D): Use "D8_7" instead of "D8".
164 (IF4E, IF4F): New. Use "D8_6".
165 (v850_opcodes): Use IF4A/IF4B for sld.b/sst.b. Use IF4C/IF4D for
166 sld.h/sst.h. Use IF4E/IF4F for sld.w/sst.w.
168 * v850-opc.c (insert_d16_15, extract_d16_15): New functions.
169 (v850_operands): Change D16 to D16_15, use special insert/extract
170 routines. New new D16 that uses the generic insert/extract code.
171 (IF7A, IF7B): Use D16_15.
172 (IF7C, IF7D): New. Use D16.
173 (v850_opcodes): Use IF7C and IF7D for ld.b and st.b.
175 * v850-opc.c (insert_d9, insert_d22): Slightly improve error
176 message. Issue an error if the branch offset is odd.
178 * v850-opc.c: Add notes about needing special insert/extract
179 for all the load/store insns, except "ld.b" and "st.b".
181 * v850-opc.c (insert_d22, extract_d22): New functions.
182 (v850_operands): Use insert_d22 and extract_d22 for
184 (insert_d9): Fix range check.
186 Fri Aug 30 18:01:02 1996 J.T. Conklin <jtc@hippo.cygnus.com>
188 * v850-opc.c (v850_operands): Add V850_OPERAND_SIGNED flag
189 and set bits field to D9 and D22 operands.
191 Thu Aug 29 11:10:46 1996 Jeffrey A Law (law@cygnus.com)
193 * v850-opc.c (v850_operands): Define SR2 operand.
194 (v850_opcodes): "ldsr" uses R1,SR2.
196 * v850-opc.c (v850_opcodes): Fix opcode specs for
197 sld.w, sst.b, sst.h, sst.w, and nop.
199 Wed Aug 28 15:55:43 1996 Jeffrey A Law (law@cygnus.com)
201 * v850-opc.c (v850_opcodes): Add null opcode to mark the
202 end of the opcode table.
206 Mon Aug 26 13:35:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
208 * d10v-opc.c (pre_defined_registers): Added register pairs,
209 "r0-r1", "r2-r3", etc.
213 Fri Aug 23 00:27:01 1996 Jeffrey A Law (law@cygnus.com)
215 * v850-opc.c (v850_operands): Make I16 be a signed operand.
216 Create I16U for an unsigned 16bit mmediate operand.
217 (v850_opcodes): Use I16U for "ori", "andi" and "xori".
219 * v850-opc.c (v850_operands): Define EP operand.
220 (IF4A, IF4B, IF4C, IF4D): Use EP.
222 * v850-opc.c (v850_opcodes): Fix opcode numbers for "mov"
223 with immediate operand, "movhi". Tweak "ldsr".
225 * v850-opc.c (v850_opcodes): Get ld.[bhw] and st.[bhw]
226 correct. Get sld.[bhw] and sst.[bhw] closer.
228 * v850-opc.c (v850_operands): "not" is a two byte insn
230 * v850-opc.c (v850_opcodes): Correct bit pattern for setf.
232 * v850-opc.c (v850_operands): D16 inserts at offset 16!
234 * v850-opc.c (two): Get order of words correct.
236 * v850-opc.c (v850_operands): I16 inserts at offset 16!
238 * v850-opc.c (v850_operands): Add "SR1" and "SR2" for system
239 register source and destination operands.
240 (v850_opcodes): Use SR1 and SR2 for "ldsr" and "stsr".
242 * v850-opc.c (v850_opcodes): Fix thinko in "jmp" opcode. Fix
243 same thinko in "trap" opcode.
245 * v850-opc.c (v850_opcodes): Add initializer for size field
248 * v850-opc.c (v850_operands): D6 -> DS7. References changed.
249 Add D8 for 8-bit unsigned field in short load/store insns.
250 (IF4A, IF4D): These both need two registers.
251 (IF4C, IF4D): Define. Use 8-bit unsigned field.
252 (v850_opcodes): For "sld.h", "sld.w", "sst.h", "sst.w", use
253 IF4C & IF4D. For "trap" use I5U, not I5. Add IF1 operand
254 for "ldsr" and "stsr".
255 * v850-opc.c (v850_operands): 3-bit immediate for bit insns
258 * v850-opc.c (v850_opcodes): Correct short store half (sst.h) and
259 short store word (sst.w).
261 Thu Aug 22 16:57:27 1996 J.T. Conklin <jtc@rtl.cygnus.com>
263 * v850-opc.c (v850_operands): Added insert and extract fields,
264 pointers to functions that handle unusual operand encodings.
266 Thu Aug 22 01:05:24 1996 Jeffrey A Law (law@cygnus.com)
268 * v850-opc.c (v850_opcodes): Enable "trap".
270 * v850-opc.c (v850_opcodes): Fix order of displacement
271 and register for "set1", "clr1", "not1", and "tst1".
273 Wed Aug 21 18:46:26 1996 Jeffrey A Law (law@cygnus.com)
275 * v850-opc.c (v850_operands): Add "B3" support.
276 (v850_opcodes): Fix and enable "set1", "clr1", "not1"
279 * v850-opc.c (v850_opcodes): "jmp" has only an R1 operand.
281 * v850-opc.c: Close unterminated comment.
283 Wed Aug 21 17:31:26 1996 J.T. Conklin <jtc@hippo.cygnus.com>
285 * v850-opc.c (v850_operands): Add flags field.
286 (v850_opcodes): add move opcodes.
288 Tue Aug 20 14:41:03 1996 J.T. Conklin <jtc@hippo.cygnus.com>
290 * Makefile.in (ALL_MACHINES): Add v850-opc.o.
291 * configure: (bfd_v850v_arch) Add new case.
292 * configure.in: (bfd_v850_arch) Add new case.
293 * v850-opc.c: New file.
296 Mon Aug 19 15:21:38 1996 Doug Evans <dje@canuck.cygnus.com>
298 * sparc-dis.c (print_insn_sparc): Handle little endian sparcs.
301 Thu Aug 15 13:14:43 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
303 * d10v-opc.c: Add additional information to the opcode
304 table to help determinine which instructions can be done
308 Thu Aug 15 13:11:13 1996 Stan Shebs <shebs@andros.cygnus.com>
310 * mpw-make.sed: Update editing of include pathnames to be
313 Thu Aug 15 16:28:41 1996 James G. Smith <jsmith@cygnus.co.uk>
315 * arm-opc.h: Added "bx" instruction definition.
317 Wed Aug 14 17:00:04 1996 Richard Henderson <rth@tamu.edu>
319 * alpha-opc.c (EV4EXTHWINDEX): Field width should be 8 not 5.
322 Mon Aug 12 14:30:37 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
324 * d10v-opc.c (d10v_opcodes): Minor fixes to addi and bl.l.
326 Fri Aug 9 13:21:59 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
328 * d10v-opc.c (d10v_opcodes): Correct 'mv' unit entry to EITHER.
331 Thu Aug 8 12:43:52 1996 Klaus Kaempf <kkaempf@progis.de>
333 * makefile.vms: Update for alpha-opc changes.
335 Wed Aug 7 11:55:10 1996 Ian Lance Taylor <ian@cygnus.com>
337 * i386-dis.c (print_insn_i386): Actually return the correct value.
338 (ONE, OP_ONE): #ifdef out; not used.
341 Fri Aug 2 17:47:03 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
343 * d10v-opc.c (d10v_opcodes): Added 2 accumulator sub instructions.
344 Changed subi operand type to treat 0 as 16.
347 Wed Jul 31 16:21:41 1996 Ian Lance Taylor <ian@cygnus.com>
349 * m68k-opc.c: Add cpushl for the mcf5200. From Ken Rose
352 Wed Jul 31 14:39:27 1996 James G. Smith <jsmith@cygnus.co.uk>
354 * arm-opc.h: (arm_opcodes): Added halfword and sign-extension
355 memory transfer instructions. Add new format string entries %h and %s.
356 * arm-dis.c: (print_insn_arm): Provide decoding of the new
360 Fri Jul 26 11:45:04 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
362 * d10v-opc.c (d10v_operands): Added UNUM4S; a 4-bit accumulator shift.
363 (d10v_opcodes): Modified accumulator shift instructions to use UNUM4S.
366 Fri Jul 26 14:01:43 1996 Ian Lance Taylor <ian@cygnus.com>
368 * alpha-dis.c (print_insn_alpha_osf): Remove.
369 (print_insn_alpha_vms): Remove.
370 (print_insn_alpha): Make globally visible. Chose the register
371 names based on info->flavour.
372 * disassemble.c: Always return print_insn_alpha for the alpha.
375 Thu Jul 25 15:24:17 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
377 * d10v-dis.c (dis_long): Handle unknown opcodes.
379 Thu Jul 25 12:08:09 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
381 * d10v-opc.c: Changes to support signed and unsigned numbers.
382 All instructions with the same name that have long and short forms
383 now end in ".l" or ".s". Divs added.
384 * d10v-dis.c: Changes to support signed and unsigned numbers.
386 Tue Jul 23 11:02:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
388 * d10v-dis.c: Change all functions to use info->print_address_func.
391 Mon Jul 22 15:38:53 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
393 * m68k-opc.c (m68k_opcodes): Make opcode masks for the ColdFire
394 move ccr/sr insns more strict so that the disassembler only
395 selects them when the addressing mode is data register.
398 Mon Jul 22 11:25:24 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
399 * d10v-opc.c (pre_defined_registers): Declare.
400 * d10v-dis.c (print_operand): Now uses pre_defined_registers
401 to pick a better name for the registers.
404 Mon Jul 22 13:47:23 1996 Ian Lance Taylor <ian@cygnus.com>
406 * sparc-opc.c: Fix opcode values for fpack16, and fpackfix. Fix
407 operands for fexpand and fpmerge. From Christian Kuehnke
408 <Christian.Kuehnke@arbi.informatik.uni-oldenburg.de>.
410 Mon Jul 22 13:17:06 1996 Richard Henderson <rth@tamu.edu>
412 * alpha-dis.c (print_insn_alpha): No longer the user-visible
413 print routine. Take new regnames and cpumask arguments.
414 Kill the environment variable nonsense.
415 (print_insn_alpha_osf): New function. Do OSF/1 style regnames.
416 (print_insn_alpha_vms): New function. Do VMS style regnames.
417 * disassemble.c (disassembler): Test bfd flavour to pick
418 between OSF and VMS routines. Default to OSF.
420 Thu Jul 18 17:19:34 1996 Ian Lance Taylor <ian@cygnus.com>
422 * configure.in: Call AC_SUBST (INSTALL_SHLIB).
423 * configure: Rebuild.
424 * Makefile.in (install): Use @INSTALL_SHLIB@.
427 Wed Jul 17 14:39:05 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
429 * configure: (bfd_d10v_arch) Add new case.
430 * configure.in: (bfd_d10v_arch) Add new case.
431 * d10v-dis.c: New file.
432 * d10v-opc.c: New file.
433 * disassemble.c (disassembler) Add entry for d10v.
436 Wed Jul 17 10:12:05 1996 J.T. Conklin <jtc@rtl.cygnus.com>
438 * m68k-opc.c (m68k_opcodes): Fix bugs in coldfire insns relating
439 to bcc, trapfl, subxl, and wddata discovered by Andreas Schwab.
441 Mon Jul 15 16:59:55 1996 Stu Grossman (grossman@critters.cygnus.com)
443 * i386-dis.c: Get rid of print_insn_i8086. Use info.mach to
444 distinguish between variants of the instruction set.
445 * sparc-dis.c: Get rid of print_insn_sparclite. Use info.mach to
446 distinguish between variants of the instruction set.
448 Fri Jul 12 10:12:01 1996 Stu Grossman (grossman@critters.cygnus.com)
450 * i386-dis.c (print_insn_i8086): New routine to disassemble using
451 the 8086 instruction set.
452 * i386-dis.c: General cleanups. Make most things static. Add
453 prototypes. Get rid of static variables aflags and dflags. Pass
454 them as args (to almost everything).
456 Thu Jul 11 11:58:44 1996 Jeffrey A Law (law@cygnus.com)
458 * h8300-dis.c (bfd_h8_disassemble): Handle macregs in ldmac insns.
460 * h8300-dis.c (bfd_h8_disassemble): Handle "ldm.l" and "stm.l".
462 * h8300-dis.c (bfd_h8_disassemble): "abs" is implicitly two
463 if the next arg is marked with SRC_IN_DST. Gross.
465 * h8300-dis.c (bfd_h8_disassemble): Print "exr" when
466 we're looking for and find EXR.
468 * h8300-dis.c (bfd_h8_disassemble): We don't have a match
469 if we're looking for KBIT and we don't find it.
471 * h8300-dis.c (bfd_h8_disassemble): Mask off unwanted bits
474 * h8300-dis.c (bfd_h8_disassemble): Don't set plen for
475 3bit immediate operands.
477 Tue Jul 9 10:55:20 1996 Ian Lance Taylor <ian@cygnus.com>
479 * Released binutils 2.7.
481 * alpha-opc.c: Add new case of "mov". From Klaus Kaempf
482 <kkaempf@progis.ac-net.de>.
484 Thu Jul 4 11:42:51 1996 Ian Lance Taylor <ian@cygnus.com>
486 * alpha-opc.c: Correct second case of "mov" to use OPRL.
488 Wed Jul 3 16:03:47 1996 Stu Grossman (grossman@critters.cygnus.com)
490 * sparc-dis.c (print_insn_sparclite): New routine to print
491 sparclite instructions.
493 Wed Jul 3 14:21:18 1996 J.T. Conklin <jtc@rtl.cygnus.com>
495 * m68k-opc.c (m68k_opcodes): Add coldfire support.
497 Fri Jun 28 15:53:51 1996 Doug Evans <dje@canuck.cygnus.com>
499 * sparc-opc.c (asi_table): Add #ASI_N, #ASI_N_L, #ASI_NUCLEUS,
500 #ASI_NUCLEUS_LITTLE. Rename #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_L
501 to #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_LITTLE.
503 Tue Jun 25 22:58:31 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
505 * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir):
506 Use autoconf-set values.
507 (docdir, oldincludedir): Removed.
508 * configure.in (AC_PREREQ): autoconf 2.5 or higher.
510 Fri Jun 21 13:53:36 1996 Richard Henderson <rth@tamu.edu>
512 * alpha-opc.c: New file.
513 * alpha-opc.h: Remove.
514 * alpha-dis.c: Complete rewrite to use new opcode table.
515 * configure.in: For bfd_alpha_arch, use alpha-opc.o.
516 * configure: Rebuild with autoconf 2.10.
517 * Makefile.in (ALL_MACHINES): Add alpha-opc.o.
518 (alpha-dis.o): Depend upon $(INCDIR)/opcode/alpha.h, not
520 (alpha-opc.o): New target.
522 Wed Jun 19 15:55:12 1996 Ian Lance Taylor <ian@cygnus.com>
524 * sparc-dis.c (print_insn_sparc): Remove unused local variable i.
525 Set imm_added_to_rs1 even if the source and destination register
528 * sparc-opc.c: Add some two operand forms of the wr instruction.
530 Tue Jun 18 15:58:27 1996 Jeffrey A. Law <law@rtl.cygnus.com>
532 * h8300-dis.c (bfd_h8_disassemble): Rename "hmode" argument
535 * disassemble.c (disassembler): Handle H8/S.
536 * h8300-dis.c (print_insn_h8300s): New function for H8/S.
538 Tue Jun 18 18:06:50 1996 Ian Lance Taylor <ian@cygnus.com>
540 * sparc-opc.c: Add beq/teq as aliases for be/te.
542 * ppc-opc.c: Fix fcmpo opcode. From Sergei Steshenko
543 <sergei@msil.sps.mot.com>.
545 Tue Jun 18 15:08:54 1996 Klaus Kaempf <kkaempf@progis.de>
547 * makefile.vms: New file.
549 * alpha-dis.c (print_insn_alpha): Print lda ra,lit(rz) as mov.
551 Mon Jun 10 18:50:38 1996 Ian Lance Taylor <ian@cygnus.com>
553 * h8300-dis.c (bfd_h8_disassemble): Always print ABS8MEM with :8,
556 Tue Jun 4 09:15:53 1996 Doug Evans <dje@canuck.cygnus.com>
558 * i386-dis.c (OP_OFF): Call append_prefix.
560 Thu May 23 15:18:23 1996 Michael Meissner <meissner@tiktok.cygnus.com>
562 * ppc-opc.c (instruction encoding macros): Add explicit casts to
563 unsigned long to silence a warning from the Solaris PowerPC
566 Thu Apr 25 19:33:32 1996 Doug Evans <dje@canuck.cygnus.com>
568 * sparc-opc.c (sparc_opcodes): Add ultrasparc vis extensions.
570 Mon Apr 22 17:12:35 1996 Doug Evans <dje@blues.cygnus.com>
572 * sparc-dis.c (X_IMM,X_SIMM): New macros.
574 (print_insn_sparc): Merge cases i,I,j together. New cases X,Y.
575 * sparc-opc.c (sparc_opcodes): Use X for 5 bit shift constants,
576 Y for 6 bit shift constants. Rewrite entries for crdcxt, cwrcxt,
577 cpush, cpusha, cpull sparclet insns.
579 Wed Apr 17 14:20:22 1996 Doug Evans <dje@canuck.cygnus.com>
581 * sparc-dis.c (compute_arch_mask): Replace ANSI style def with K&R.
583 Thu Apr 11 17:30:02 1996 Ian Lance Taylor <ian@cygnus.com>
585 * sparc-opc.c: Set F_FBR on floating point branch instructions.
586 Set F_FLOAT on other floating point instructions.
588 Mon Apr 8 17:02:48 1996 Michael Meissner <meissner@tiktok.cygnus.com>
590 * ppc-opc.c (PPC860): Macro for 860/821 specific instructions and
592 (powerpc_opcodes): Add 860/821 specific SPRs.
594 Mon Apr 8 14:00:44 1996 Ian Lance Taylor <ian@cygnus.com>
596 * configure.in: Permit --enable-shared to specify a list of
597 directories. Set and substitute BFD_PICLIST.
598 * configure: Rebuild.
599 * Makefile.in (BFD_PICLIST): Rename from BFD_LIST. Change all
600 uses. Set to @BFD_PICLIST@.
602 Fri Apr 5 17:12:27 1996 Jeffrey A Law (law@cygnus.com)
604 * h8300-dis.c (bfd_h8_disassemble): Use "bit" for L_3 immediates,
605 not "abs", which may be needed for the absolute in something
606 like btst #0,@10:8. Print L_3 immediates separately from other
607 immediates. Change ABSMOV reference to ABS8MEM.
609 Wed Apr 3 10:40:45 1996 Doug Evans <dje@canuck.cygnus.com>
611 * sparc-dis.c (opcodes_initialized): Move inside print_insn_sparc.
612 (current_arch_mask): New static global.
613 (compute_arch_mask): New static function.
614 (print_insn_sparc): Delete sparc_v9_p. New static local
615 current_mach. Resort opcode table if current_mach changes.
616 Generalize "insn not supported" test.
617 (compare_opcodes): Prefer supported opcodes to nonsupported ones.
618 Delete test for v9/!v9.
619 * sparc-opc.c (MASK_*): Use SPARC_OPCODE_ARCH_MASK.
621 (brfc): Split into CBR and FBR for coprocessor/fp branches.
622 (brfcx): Renamed to FBRX.
623 (condfc): Renamed to CONDFC. Pass v6notlet to CBR (standard
624 coprocessor mnemonics are not supported on the sparclet).
625 (condf): Renamed to CONDF.
626 (SLCBCC2): Delete F_ALIAS flag.
628 Sat Mar 30 21:45:59 1996 Doug Evans <dje@canuck.cygnus.com>
630 * sparc-opc.c (sparc_opcodes): rd must be 0 for
631 mov foo,{%y,%psr,%wim,%tbr}. Support mov foo,%asrX.
633 Fri Mar 29 13:02:40 1996 Ian Lance Taylor <ian@cygnus.com>
635 * Makefile.in (config.status): Depend upon BFD VERSION file, so
636 that the shared library version number is set correctly.
638 Tue Mar 26 15:47:14 1996 Ian Lance Taylor <ian@cygnus.com>
640 * configure.in: Use AC_CHECK_TOOL to find ar and ranlib. From
641 Miles Bader <miles@gnu.ai.mit.edu>.
642 * configure: Rebuild.
644 Sat Mar 16 13:04:07 1996 Fred Fish <fnf@cygnus.com>
646 * z8kgen.c (internal, gas): Call xmalloc rather than unchecked
649 Tue Mar 12 12:14:10 1996 Ian Lance Taylor <ian@cygnus.com>
651 * configure: Rebuild with autoconf 2.8.
653 Thu Mar 7 15:11:10 1996 Doug Evans <dje@charmed.cygnus.com>
655 * sparc-dis.c (print_insn_sparc): Handle 'O' operand char like 'r'.
656 * sparc-opc.c (sparc_opcodes): Use 'O' operand char for `neg reg'.
658 Tue Mar 5 15:51:57 1996 Ian Lance Taylor <ian@cygnus.com>
660 * configure.in: Don't set SHLIB or SHLINK to an empty string,
661 since they appear as targets in Makefile.in.
662 * configure: Rebuild.
664 Mon Feb 26 13:03:40 1996 Stan Shebs <shebs@andros.cygnus.com>
666 * mpw-make.sed: Edit out shared library support bits.
668 Tue Feb 20 20:48:28 1996 Doug Evans <dje@charmed.cygnus.com>
670 * sparc-opc.c (v8,v6notv9): Add MASK_SPARCLET.
671 (sparc_opcode_archs): Add MASK_V8 to sparclet entry.
672 (sparc_opcodes): Add sparclet insns.
673 (sparclet_cpreg_table): New static local.
674 (sparc_{encode,decode}_sparclet_cpreg): New functions.
675 * sparc-dis.c (print_insn_sparc): Handle sparclet cpregs.
677 Tue Feb 20 11:02:44 1996 Alan Modra <alan@mullet.Levels.UniSA.Edu.Au>
679 * i386-dis.c (index16): New static variable.
680 (putop): Print jecxz for 32 bit case, jcxz for 16 bit, not the
682 (OP_indirE): Return result of OP_E.
683 (OP_E): Check for 16 bit addressing mode, and disassemble
684 correctly. Optimised 32 bit case a little. Don't print
685 "(base,index,scale)" when sib specifies only an offset.
687 Mon Feb 19 12:32:17 1996 Ian Lance Taylor <ian@cygnus.com>
689 * configure.in: Set and substitute SHLIB_DEP.
690 * configure: Rebuild.
691 * Makefile.in (SHLIB_DEP): New variable.
692 (LIBIBERTY_LISTS, BFD_LIST): New variables.
693 (stamp-piclist): Depend upon LIBIBERTY_LISTS and BFD_LIST. If
694 COMMON_SHLIB, add them to piclist with appropriate modifications.
695 ($(SHLIB)): Depend upon $(SHLIB_DEP). Don't check COMMON_SHLIB
696 here: just use piclist.
698 Mon Feb 19 02:03:50 1996 Doug Evans <dje@charmed.cygnus.com>
700 * sparc-dis.c (MASK_V9,V9_ONLY_P,V9_P): Define.
701 (print_insn_sparc): Rewrite v9/not-v9 tests.
702 (compare_opcodes): Likewise.
703 * sparc-opc.c (MASK_<ARCH>): Define.
704 (v6,v7,v8,sparclite,v9,v9a): Redefine.
705 (sparclet,v6notv9): Define.
706 (sparc_opcode_archs): Delete member `conflicts'. Add `supported'.
707 (sparc_opcodes): Delete F_NOTV9, use v6notv9 instead.
709 Thu Feb 15 14:45:05 1996 Ian Lance Taylor <ian@cygnus.com>
711 * configure.in: Call AC_PROG_CC before configure.host.
712 * configure: Rebuild.
714 * Makefile.in (SONAME): Remove leading ../bfd/ from $(SHLIB).
716 Wed Feb 14 19:01:27 1996 Alan Modra <alan@spri.levels.unisa.edu.au>
718 * i386-dis.c (onebyte_has_modrm): New static array.
719 (twobyte_has_modrm): New static array.
720 (print_insn_i386): Only fetch the mod/reg/rm byte if it is needed.
722 Tue Feb 13 15:15:01 1996 Ian Lance Taylor <ian@cygnus.com>
724 * Makefile.in ($(SHLINK)): Check ts against $(SHLIB), not
727 Mon Feb 12 16:26:06 1996 Michael Meissner <meissner@tiktok.cygnus.com>
729 * ppc-opc.c (PPC): Undef, so default defination on Windows NT
732 Wed Feb 7 13:59:54 1996 Ian Lance Taylor <ian@cygnus.com>
734 * m68k-opc.c (m68k_opcodes): The bkpt instruction is supported on
735 m68010up, not just m68020up | cpu32.
737 * Makefile.in (SONAME): New variable.
738 ($(SHLINK)): Make a link to the transformed name, as well.
739 (stamp-tshlink): New target.
740 (install): Skip stamp-tshlink during install.
742 Tue Feb 6 12:28:54 1996 Ian Lance Taylor <ian@cygnus.com>
744 * configure.in: Call AC_ARG_PROGRAM.
745 * configure: Rebuild.
746 * Makefile.in (program_transform_name): New variable.
747 (install): Transform library name before installing it.
749 Mon Feb 5 16:14:42 1996 Ian Lance Taylor <ian@cygnus.com>
751 * i960-dis.c (mem): Add HX dcinva instruction.
753 Support for building as a shared library, based on patches from
754 Alan Modra <alan@spri.levels.unisa.edu.au>:
755 * configure.in: Add AC_ARG_ENABLE for shared and commonbfdlib.
756 New substitutions: ALLLIBS, PICFLAG, SHLIB, SHLIB_CC,
757 SHLIB_CFLAGS, COMMON_SHLIB, SHLINK.
758 * configure: Rebuild.
759 * Makefile.in (ALLLIBS): New variable.
760 (PICFLAG, SHLIB, SHLIB_CC, SHLIB_CFLAGS): New variables.
761 (COMMON_SHLIB, SHLINK): New variables.
762 (.c.o): If PICFLAG is set, compile twice, once PIC, once normal.
763 (STAGESTUFF): Remove variable.
764 (all): Depend upon $(ALLLIBS) rather than $(TARGETLIB).
765 (stamp-piclist, piclist): New targets.
766 ($(SHLIB), $(SHLINK)): New targets.
767 ($(OFILES)): Depend upon stamp-picdir.
768 (disassemble.o): Build twice if PICFLAG is set.
769 (MOSTLYCLEAN): Add pic/*.o.
770 (clean): Remove $(SHLIB), $(SHLINK), piclist, and stamp-piclist.
771 (distclean): Remove pic and stamp-picdir.
772 (install): Install shared libraries.
773 (stamp-picdir): New target.
775 Fri Feb 2 17:15:25 1996 Doug Evans <dje@charmed.cygnus.com>
777 * sparc-dis.c (print_insn_sparc): Delete DISASM_RAW_INSN support.
778 Print unknown instruction as "unknown", rather than in hex.
780 Tue Jan 30 14:06:08 1996 Ian Lance Taylor <ian@cygnus.com>
782 * dis-buf.c: Include "sysdep.h" before "dis-asm.h".
784 Thu Jan 25 20:24:07 1996 Doug Evans <dje@charmed.cygnus.com>
786 * sparc-opc.c (sparc_opcode_archs): Mark v8/sparclite as conflicting.
788 Thu Jan 25 11:56:49 1996 Ian Lance Taylor <ian@cygnus.com>
790 * i386-dis.c (print_insn_i386): Only fetch the mod/reg/rm byte
791 when necessary. From Ulrich Drepper
792 <drepper@myware.rz.uni-karlsruhe.de>.
794 Thu Jan 25 03:39:10 1996 Doug Evans <dje@charmed.cygnus.com>
796 * sparc-dis.c (print_insn_sparc): NUMOPCODES replaced with
797 sparc_num_opcodes. Update architecture enum values.
798 * sparc-opc.c (sparc_opcode_archs): Replaces architecture_pname.
799 (sparc_opcode_lookup_arch): New function.
800 (sparc_num_opcodes): Renamed from bfd_sparc_num_opcodes.
801 (sparc_opcodes): Add v9a shutdown insn.
803 Mon Jan 22 08:29:59 1996 Doug Evans <dje@charmed.cygnus.com>
805 * sparc-dis.c (print_insn_sparc): Renamed from print_insn.
806 If DISASM_RAW_INSN, print insn in hex. Handle v9a as opcode
808 (print_insn_sparc64): Deleted.
809 * disassemble.c (disassembler, case bfd_arch_sparc): Always use
812 * sparc-opc.c (architecture_pname): Add v9a.
814 Fri Jan 12 14:35:58 1996 David Mosberger-Tang <davidm@AZStarNet.com>
816 * alpha-opc.h (alpha_insn_set): VAX floating point opcode was
817 incorrectly defined as 0x16 when it should be 0x15.
818 (FLOAT_FORMAT_MASK): function code is 11 bits, not just 7 bits!
819 (alpha_insn_set): added cvtst and cvttq float ops. Also added
820 excb (exception barrier) which is defined in the Alpha
821 Architecture Handbook version 2.
822 * alpha-dis.c (print_insn_alpha): Fixed special-case decoding for
823 OPERATE_FORMAT_CODE type instructions. The bug caused mulq to be
824 disassembled as or, for example.
826 Wed Jan 10 12:37:22 1996 Ian Lance Taylor <ian@cygnus.com>
828 * mips-dis.c (print_insn_arg): Print cases 'i' and 'u' in hex.
829 (_print_insn_mips): Change i from int to unsigned int.
831 Thu Jan 4 17:21:10 1996 David Edelsohn <edelsohn@mhpcc.edu>
833 * ppc-opc.c (powerpc_opcodes): tlbi POWER opcode form different
834 from tlbie PowerPC opcode. Add PPC603 tlbld and tlbli.
836 Thu Dec 28 13:29:19 1995 John Hassey <hassey@rtp.dg.com>
838 * i386-dis.c: Added Pentium Pro instructions.
840 Tue Dec 19 22:56:35 1995 Michael Meissner <meissner@tiktok.cygnus.com>
842 * ppc-opc.c (fsqrt{,.}): Duplicate for PowerPC in addition to
845 Fri Dec 15 14:14:15 1995 J.T. Conklin <jtc@rtl.cygnus.com>
847 * sh-opc.h (sh_nibble_type): Added REG_B.
848 (sh_arg_type): Added A_REG_B.
849 (sh_table): Added pref and bank reg versions of ldc, ldc.l, stc
851 * sh-dis.c (print_insn_shx): Added cases for REG_B and A_REG_B.
853 Fri Dec 15 16:44:31 1995 Ian Lance Taylor <ian@cygnus.com>
855 * disassemble.c (disassembler): Use new bfd_big_endian macro.
857 Tue Dec 12 12:22:24 1995 Ian Lance Taylor <ian@cygnus.com>
859 * Makefile.in (distclean): Remove stamp-h. From Ronald
860 F. Guilmette <rfg@monkeys.com>.
862 Tue Dec 5 13:42:44 1995 Stan Shebs <shebs@andros.cygnus.com>
864 From David Mosberger-Tang <davidm@azstarnet.com>:
865 * alpha-dis.c (print_insn_alpha): fixed decoding of cpys
868 Mon Dec 4 12:29:05 1995 J.T. Conklin <jtc@rtl.cygnus.com>
870 * sh-opc.h (sh_arg_type): Added A_SSR and A_SPC.
871 (sh_table): Added many SH3 opcodes.
872 * sh-dis.c (print_insn_shx): Added cases for A_SSR and A_SPC.
874 Fri Dec 1 07:42:18 1995 Michael Meissner <meissner@tiktok.cygnus.com>
876 * ppc-opc.c (subfc., subfco): Mark this PPCCOM, not PPC.
877 (subco,subco.): Mark this PPC, not PPCCOM.
879 Mon Nov 27 13:09:52 1995 Ian Lance Taylor <ian@cygnus.com>
881 * configure: Rebuild with autoconf 2.7.
883 Tue Nov 21 18:28:06 1995 Ian Lance Taylor <ian@cygnus.com>
885 * configure: Rebuild with autoconf 2.6.
887 Wed Nov 15 19:02:53 1995 Ken Raeburn <raeburn@cygnus.com>
889 * configure.in: Sort list of architectures. Accept but do nothing
890 for alliant, convex, pyramid, romp, and tahoe.
892 Wed Nov 8 20:18:59 1995 Ian Lance Taylor <ian@cygnus.com>
894 * a29k-dis.c (print_special): Change num to unsigned int.
896 Wed Nov 8 20:10:35 1995 Eric Freudenthal <freudenthal@nyu.edu>
898 * a29k-dis.c (print_insn): Cast insn24 to unsigned long when
901 Tue Nov 7 15:21:06 1995 Ian Lance Taylor <ian@cygnus.com>
903 * configure.in: Call AC_CHECK_PROG to find and cache AR.
904 * configure: Rebuilt.
906 Mon Nov 6 17:39:47 1995 Harry Dolan <dolan@ssd.intel.com>
908 * configure.in: Add case for bfd_i860_arch.
909 * configure: Rebuild.
911 Fri Nov 3 12:45:31 1995 Ian Lance Taylor <ian@cygnus.com>
913 * m68k-opc.c (m68k_opcodes): Correct fmoveml operands.
914 * m68k-dis.c (NEXTSINGLE): Change i to unsigned int.
915 (NEXTDOUBLE): Likewise.
916 (print_insn_m68k): Don't match fmoveml if there is more than one
917 register in the list.
918 (print_insn_arg): Handle a place of '8' for a type of 'L'.
920 Thu Nov 2 23:06:33 1995 Ian Lance Taylor <ian@cygnus.com>
922 * m68k-opc.c: Use #W rather than #w.
923 * m68k-dis.c (print_insn_arg): Handle new 'W' place.
925 Wed Nov 1 13:30:24 1995 Ian Lance Taylor <ian@cygnus.com>
927 * m68k-opc.c (m68k_opcode_aliases): Add dbfw as an alias for dbf,
928 and likewise for all the dbxx opcodes.
930 Mon Oct 30 20:50:40 1995 Fred Fish <fnf@cygnus.com>
932 * arc-dis.c: Include elf-bfd.h rather than libelf.h.
934 Mon Oct 23 11:11:34 1995 James G. Smith <jsmith@pasanda.cygnus.co.uk>
936 * mips-opc.c: Added shorthand (V1) for INSN_4100 manifest. Added
937 the VR4100 specific instructions to the mips_opcodes structure.
939 Thu Oct 19 11:05:23 1995 Stan Shebs <shebs@andros.cygnus.com>
941 * mpw-config.in, mpw-make.sed: Remove ugly workaround for
942 ugly Metrowerks bug in CW6, is fixed in CW7.
944 Mon Oct 16 12:59:01 1995 Michael Meissner <meissner@tiktok.cygnus.com>
946 * ppc-opc.c (whole file): Add flags for common/any support.
948 Tue Oct 10 11:06:07 1995 Fred Fish <fnf@cygnus.com>
950 * Makefile.in (BISON): Remove macro.
951 (FLAGS_TO_PASS): Remove BISON.
953 Fri Oct 6 16:26:45 1995 Ken Raeburn <raeburn@cygnus.com>
955 Mon Sep 25 22:49:32 1995 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
957 * m68k-dis.c (print_insn_m68k): Recognize all two-word
958 instructions that take no args by looking at the match mask.
959 (print_insn_arg): Always print "%" before register names.
960 [case 'c']: Use "nc" for the no-cache case, as recognized by gas.
961 [case '_']: Don't print "@#" before address.
962 [case 'J']: Use "%s" as format string, not register name.
963 [case 'B']: Treat place == 'C' like 'l' and 'L'.
965 Thu Oct 5 22:16:20 1995 Ken Raeburn <raeburn@cygnus.com>
967 * i386-dis.c: Describe cmpxchg8b operand, and spell the opcode
970 Tue Oct 3 08:30:20 1995 steve chamberlain <sac@slash.cygnus.com>
972 From David Mosberger-Tang <davidm@azstarnet.com>
974 * alpha-opc.h (MEMORY_FUNCTION_FORMAT_MASK): added.
975 (alpha_insn_set): added definitions for VAX floating point
976 instructions (Unix compilers don't generate these, but handcoded
977 assembly might still use them).
979 * alpha-dis.c (print_insn_alpha): added support for disassembling
980 the miscellaneous instructions in the Alpha instruction set.
982 Tue Sep 26 18:47:20 1995 Stan Shebs <shebs@andros.cygnus.com>
984 * mpw-config.in: Add m68k-opc.c.o to BFD_MACHINES for m68k,
985 no longer create sysdep.h, sed ppc-opc.c to work around a
986 serious Metrowerks C bug.
987 * mpw-make.in: Remove.
988 * mpw-make.sed: New file, used by mpw-configure to edit
989 Makefile.in into an MPW makefile.
991 Wed Sep 20 12:55:28 1995 Ian Lance Taylor <ian@cygnus.com>
993 * Makefile.in (maintainer-clean): New synonym for realclean.
995 Tue Sep 19 15:28:36 1995 Ian Lance Taylor <ian@cygnus.com>
997 * m68k-opc.c: Split pmove patterns which use 'P' into patterns
998 which use '0', '1', and '2' instead. Specify the proper size for
999 a pmove immediate operand. Correct the pmovefd patterns to be
1000 moves to a register, not from a register.
1001 * m68k-dis.c (print_insn_arg): Replace 'P' with '0', '1', '2'.
1003 Thu Sep 14 11:58:22 1995 Doug Evans <dje@canuck.cygnus.com>
1005 * sparc-opc.c (sparc_opcodes): Mark all insns that reference
1006 %psr, %wim, %tbr as F_NOTV9.
1008 Fri Sep 8 01:07:38 1995 Ian Lance Taylor <ian@cygnus.com>
1010 * Makefile.in (Makefile): Just rebuild Makefile when running
1012 (config.h, stamp-h): New targets.
1013 * configure.in: Call AC_CONFIG_HEADER and AC_CANONICAL_SYSTEM
1014 earlier. Don't bother to call AC_ARG_PROGRAM. Touch stamp-h when
1015 rebuilding config.h.
1016 * configure: Rebuild.
1018 * mips-opc.c: Change unaligned loads and stores with "t,A"
1019 operands to use "t,A(b)".
1021 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
1023 * sh-dis.c (print_insn_shx): Add F_FR0 support.
1025 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
1027 * sh-dis.c (print_insn_shx): Change loop over op->arg[n] to iterate
1028 until 3 instead of until 2.
1030 Wed Sep 6 21:21:33 1995 Ian Lance Taylor <ian@cygnus.com>
1032 * Makefile.in (ALL_CFLAGS): Define.
1033 (.c.o, disassemble.o): Use $(ALL_CFLAGS).
1034 (MOSTLYCLEAN): Add config.log.
1035 (distclean): Don't remove config.log.
1036 * configure.in: Substitute HDEFINES.
1037 * configure: Rebuild.
1039 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
1041 * sh-opc.h (sh_arg_type): Add F_FR0.
1042 (sh_table, case fmac): Add F_FR0 as first argument.
1044 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
1046 * sh-opc.h (sh_opcode_info): Increase arg array size to 4.
1048 Tue Sep 5 18:28:10 1995 Doug Evans <dje@canuck.cygnus.com>
1050 * sparc-dis.c: Remove all references to NO_V9.
1052 Tue Sep 5 20:03:26 1995 Ian Lance Taylor <ian@cygnus.com>
1054 * aclocal.m4: Just include ../bfd/aclocal.m4.
1055 * configure: Rebuild.
1057 Tue Sep 5 16:09:59 1995 Doug Evans <dje@canuck.cygnus.com>
1059 * sparc-dis.c (X_DISP19): Define.
1060 (print_insn, case 'G'): Use it.
1061 (print_insn, case 'L'): Sign extend displacement.
1063 Mon Sep 4 14:28:46 1995 Ian Lance Taylor <ian@cygnus.com>
1065 * configure.in: Run ../bfd/configure.host before AC_PROG_CC.
1066 Subsitute CFLAGS and AR. Call AC_PROG_INSTALL. Don't substitute
1067 host_makefile_frag or frags.
1068 * aclocal.m4: New file.
1069 * configure: Rebuild.
1070 * Makefile.in (INSTALL): Set to @INSTALL@.
1071 (INSTALL_PROGRAM): Set to @INSTALL_PROGRAM@.
1072 (INSTALL_DATA): Set to @INSTALL_DATA@.
1074 (AR_FLAGS): Set to rc rather than qc.
1075 (CC): Define as @CC@.
1076 (CFLAGS): Set to @CFLAGS@.
1077 (@host_makefile_frag@): Remove.
1078 (config.status): Remove dependency upon @frags@.
1080 * configure.in: ../bfd/config.bfd now just sets shell variables.
1081 Use them rather than looking through target Makefile fragments.
1082 * configure: Rebuild.
1084 Thu Aug 31 12:35:32 1995 Jim Wilson <wilson@chestnut.cygnus.com>
1086 * sh-opc.h (ftrc): Change FPUL_N to FPUL_M.
1088 Wed Aug 30 13:52:28 1995 Doug Evans <dje@canuck.cygnus.com>
1090 * sparc-opc.c (sparc_opcodes): Delete duplicate wr %y insn.
1091 Add clrx, iprefetch, signx, clruw, cas, casl, casx, casxl synthetic
1094 * sparc-opc.c (sparc_opcodes): Fix prefetcha insn.
1095 (lookup_{name,value}): New functions.
1096 (prefetch_table): New static local.
1097 (sparc_{encode,decode}_prefetch): New functions.
1098 * sparc-dis.c (print_insn): Handle '*' arg (prefetch function).
1100 Wed Aug 30 11:11:58 1995 Jim Wilson <wilson@chestnut.cygnus.com>
1102 * sh-opc.h: Add blank lines to improve readabililty of sh3e
1105 Wed Aug 30 11:09:38 1995 Jim Wilson <wilson@chestnut.cygnus.com>
1107 * sh-dis.c: Correct comment on first line of file.
1109 Tue Aug 29 15:37:18 1995 Doug Evans <dje@canuck.cygnus.com>
1111 * disassemble.c (disassembler): Handle bfd_mach_sparc64.
1113 * sparc-opc.c (asi, membar): New static locals.
1114 (sparc_{encode,decode}_{asi,membar}): New functions.
1115 (sparc_opcodes, membar insn): Fix.
1116 * sparc-dis.c (print_insn): Call sparc_decode_asi.
1117 Support decoding of membar masks.
1120 Sat Aug 26 21:22:48 1995 Ian Lance Taylor <ian@cygnus.com>
1122 * m68k-opc.c (m68k_opcode_aliases): Add br, brs, brb, brw, brl.
1124 Mon Aug 21 17:33:36 1995 Ian Lance Taylor <ian@cygnus.com>
1126 * m68k-opc.c (m68k_opcode_aliases): Add bhib as an alias for bhis,
1127 and likewise for the other branches. Add bhs as an alias for bcc,
1128 and likewise for the size variants. Add dbhs as an alias for
1131 Fri Aug 11 13:40:24 1995 Jeff Law (law@snake.cs.utah.edu)
1133 * sh-opc.h (FP sts instructions): Update to match reality.
1135 Mon Aug 7 16:12:58 1995 Ian Lance Taylor <ian@cygnus.com>
1137 * m68k-dis.c: (fpcr_names): Add % before all register names.
1138 (reg_names): Likewise.
1139 (print_insn_arg): Don't explicitly print % before register names.
1140 Add % before register names in static array names. In case 'r',
1141 print data registers as `@(Dn)', not `Dn@'. When printing a
1142 memory address, don't print @# before it.
1143 (print_indexed): Change base_disp and outer_disp from int to
1144 bfd_vma. Print using MIT syntax, not mutant invalid Motorola
1145 syntax. Sign extend 8 byte displacement correctly.
1146 (print_base): Print using MIT syntax. Print zpc when appropriate.
1147 Change parameter disp from int to bfd_vma.
1149 * m68k-opc.c (m68k_opcode_aliases): Add jsrl and jsrs as aliases
1152 Mon Aug 7 02:21:40 1995 Jeff Law (law@snake.cs.utah.edu)
1154 * sh-dis.c (print_insn_shx): Handle new operand types F_REG_N,
1155 F_REG_M, FPSCR_M, FPSCR_N, FPUL_M and FPUL_N.
1156 * sh-opc.h (sh_arg_type): Add new operand types.
1157 (sh_table): Add new opcodes from SH3E Floating Point ISA.
1159 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
1161 * Makefile.in (distclean): Remove generated file config.h.
1163 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
1165 * Makefile.in (distclean): Remove generated file config.h.
1167 Wed Aug 2 18:33:40 1995 Ian Lance Taylor <ian@cygnus.com>
1169 * m68k-opc.c: New file, holding tables from include/opcode/m68k.h.
1171 * m68k-dis.c: Remove BREAK_UP_BIG_DECL stuff.
1173 (print_insn_m68k): Change d to be const. Use m68k_numopcodes
1174 rather than numopcodes. Use m68k_opcodes rather than removed
1175 opcode function. Don't check F_ALIAS.
1176 (print_insn_arg): Change first parameter to be const char *.
1177 * Makefile.in (ALL_MACHINES): Add m68k-opc.o.
1178 (m68k-opc.o): New target.
1179 * configure.in: Build m68k-opc.o for bfd_m68k_arch.
1180 * configure: Rebuild.
1182 Wed Aug 2 08:23:38 1995 Doug Evans <dje@canuck.cygnus.com>
1184 * sparc-dis.c (HASH_SIZE, HASH_INSN): Define.
1185 (opcode_bits, opcode_hash_table): New variables.
1186 (opcodes_initialized): Renamed from opcodes_sorted.
1187 (build_hash_table): New function.
1188 (is_delayed_branch): Use hash table.
1189 (print_insn): Renamed from print_insn_sparc, made static.
1190 Build and use hash table. If !sparc64, ignore sparc64 insns,
1191 and vice-versa if sparc64.
1192 (print_insn_sparc, print_insn_sparc64): New functions.
1193 (compare_opcodes): Move sparc64 opcodes to end.
1194 Print commutative insns with constant second.
1195 * sparc-opc.c (all non-v9 insns): Use flag F_NOTV9 instead of F_ALIAS.
1197 Tue Aug 1 00:12:49 1995 Ian Lance Taylor <ian@cygnus.com>
1199 * sh-dis.c (print_insn_shx): Remove unused local dslot. Use
1200 print_address_func for A_BDISP12 and A_BDISP8. Correct test which
1201 avoids printing a delay slot in a delay slot.
1202 * sh-opc.h (sh_table): Fully bracket last entry.
1204 Mon Jul 31 12:04:47 1995 Doug Evans <dje@canuck.cygnus.com>
1206 * sparc-opc.c (sllx, srax, srlx): Fix disassembly.
1208 Wed Jul 12 00:59:34 1995 Ken Raeburn <raeburn@kr-pc.cygnus.com>
1210 * configure.in: Get host_makefile_frag from ${srcdir}.
1212 * configure.in: Autoconfiscated. Check for string[s].h. Create
1213 config.h from config.in. Don't set up sysdep.h link.
1214 * sysdep.h: New file.
1215 * configure, config.in: New files, generated from configure.in.
1216 * Makefile.in: Updated to be processed autoconf-style.
1217 (distclean): Keep sysdep.h. Remove config.log and config.cache.
1218 (Makefile): Depend on config.status.
1219 (config.status): New rule.
1220 * configure.bat: Update Makefile substitutions.
1222 Tue Jul 11 14:23:37 1995 Jeff Spiegel <jeffs@lsil.com>
1224 * mips-opc.c (L1): Define.
1225 (mips_opcodes): Add R4010 instructions: flushi, flushd, flushid,
1226 addciu, madd, maddu, ffc, ffs, msub, msubu, selsi, selsr, waiti,
1229 Tue Jul 11 11:49:49 1995 Ian Lance Taylor <ian@cygnus.com>
1231 * mips-opc.c (mips_opcodes): For the move pseudo-op, prefer daddu
1232 if ISA 3 and addu otherwise, replacing or, since some MIPS chips
1233 have multiple add units but only a single logical unit.
1235 * ppc-opc.c (powerpc_operands): Change CR to use a bitsize of 3,
1236 shifted by 18, without any insertion or extraction function.
1237 (insert_cr, extract_cr): Remove.
1240 Mon Jul 3 11:54:31 1995 Ian Lance Taylor <ian@cygnus.com>
1242 * Makefile.in (ALL_MACHINES): Add arc-dis.o and arc-opc.o.
1245 Wed Jun 21 20:05:39 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
1247 * m68k-dis.c (print_insn_arg, print_indexed): Print "%" before
1250 Thu Jun 15 17:23:31 1995 Stan Shebs <shebs@andros.cygnus.com>
1252 * mpw-config.in: Add sh and i386 configs, remove sparc config.
1253 * sh-opc.h: Add copyright.
1255 Mon Jun 5 03:30:43 1995 Ken Raeburn <raeburn@kr-laptop.cygnus.com>
1257 * Makefile.in (crunch-m68k): Delete extra target accidentally
1258 checked in a while ago.
1260 Wed May 24 16:22:13 1995 Jim Wilson <wilson@chestnut.cygnus.com>
1262 * sh-opc.h (sh_table): Add SH3 support.
1264 Wed May 24 14:16:08 1995 Steve Chamberlain <sac@slash.cygnus.com>
1266 * sh-opc.h: Added bsrf and braf.
1268 Wed May 10 14:28:16 1995 Richard Earnshaw (rearnsha@armltd.co.uk)
1270 * arm-opc.h (arm_opcodes): Add 64-bit multiply patterns. Delete
1271 bogus [ls]fm{ea,fd} patterns.
1273 * arm-opc.h (arm_opcodes): Correct typos in stm, ldm, std, and ldc.
1274 * arm-dis.c (print_insn_arm): Make GIVEN a parameter, don't try and
1275 initialize it from memory. Make function static.
1276 (print_insn_{big,little}_arm): New functions.
1277 * disassemble.c (disassembler, case bfd_arch_arm): Disassemble for
1278 the correct endianness.
1281 Sat Apr 29 23:20:05 1995 Doug Evans <dje@chestnut.cygnus.com>
1283 * arc-opc.c (arc_opcodes): Add ARC_OPCODE_CONDITIONAL_BRANCH flag.
1284 (arc_suffixes): Use ARC_DELAY_{NONE,NORMAL,JUMP}.
1287 Mon Apr 24 14:18:05 1995 Jason Molenda (crash@phydeaux.cygnus.com>
1289 * sh-opc.h (sh_nibble_type, sh_arg_type): remove trailing , from
1292 Wed Apr 19 14:07:03 1995 Michael Meissner <meissner@tiktok.cygnus.com>
1294 * m68k-dis.c (opcode): Finish change made by Kung Hsu on April
1295 17th, so that it builds again using GCC as the compiler.
1297 Tue Apr 18 12:14:51 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
1299 * mips-dis.c (print_insn_little_mips): Cast return value from
1300 bfd_getl32 from bfd_vma to unsigned long, because _print_insn_mips
1301 expects an unsigned long, and that might be fewer words of
1302 argument storage (e.g., if bfd_vma is long long on a 32-bit
1304 (print_insn_big_mips): Likewise with bfd_getb32 value.
1305 (_print_insn_mips): Now static.
1307 Mon Apr 17 12:23:28 1995 Kung Hsu <kung@rtl.cygnus.com>
1309 * m68k-dis.c: Take out #define BREAK_UP_BIG_DECL kludge, because
1310 gcc memory hog problem with initializer is fixed.
1313 Wed Apr 12 09:04:12 1995 Doug Evans <dje@canuck.cygnus.com>
1315 * arc-opc.c (NULL): Define.
1316 (arc_operands, insn fields u,s): Delete.
1317 (arc_operands, insn fields a,b,c): Mark as signed.
1318 (arc_opcodes): No longer const, links computed at run-time.
1319 (arc_opcodes, mac/mul insns): Breakout suffixes as we don't handle
1320 suffixes that affect the insn code.
1321 (arc_opcodes): Resort table to macros are first.
1322 (arc_opcodes, ld [b,c] entry): Add %Q to prevent shimms.
1323 (arc_opcodes, st [b] entry): Likewise.
1324 (arc_opcodes, st [b,d] entry): Fix mask, value.
1325 (arc_reg_names): Add entries for r29, r30, r31, r60.
1326 (opcode_map, icode_map): New static globals.
1327 (arc_opcode_init_tables): Initialize them.
1328 (arc_opcode_lookup_asm, arc_opcode_lookup_dis): New functions.
1329 (insert_shimmoffset): Signal error if register present.
1331 * arc-dis.c (print_insn): Call arc_opcode_lookup_dis.
1334 Mon Apr 10 15:55:01 1995 Stan Shebs <shebs@andros.cygnus.com>
1336 Merge in support for Mac MPW as a host.
1337 (Old change descriptions retained for informational value.)
1339 * mpw-config.in (archname): Compute from the config.
1340 (BFD_MACHINES, ARCHDEFS): Put into mk.tmp.
1342 * mpw-config.in (target_arch): Compute from canonical target.
1343 (m68k, mips, powerpc, sparc): Add architectures.
1344 * mpw-make.in (disassemble.c.o): Add.
1345 (ALL_CFLAGS): Remove special flags (-mc68020 -mc68881 -model far).
1347 * mpw-config.in (BFD_MACHINES): Set to a default value.
1348 * mpw-make.in (BFD_MACHINES): Remove wired-in value.
1350 * mpw-make.in (CSEARCH): Add extra-include to search path.
1352 * mpw-config.in (varargs.h): Don't create.
1353 (sysdep.h): Create using forward-include.
1354 * mpw-make.in (CSEARCH): Add include/mpw to search path.
1356 * mpw-config.in: New file, MPW version of configure.in.
1357 * mpw-make.in: New file, MPW version of Makefile.in.
1360 Thu Apr 6 20:36:08 1995 Doug Evans <dje@chestnut.cygnus.com>
1362 * arc-dis.c (print_insn): New parameter `big_p'. Callers updated.
1363 Call arc_get_opcode_mach to map bfd mach number to opcode value.
1364 (print_insn_*): Pass bfd mach number, not opcode version.
1365 * arc-opc.c (arc_get_opcode_mach): New function.
1368 Fri Mar 31 14:23:38 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
1370 * alpha-dis.c (print_insn_alpha): Put empty statement after
1373 Tue Mar 21 10:51:40 1995 Jeff Law (law@snake.cs.utah.edu)
1375 * hppa-dis.c (sign_extend): Delete, redundant with libhppa.h version.
1376 (low_sign_extend): Likewise.
1377 (get_field): Delete unused function.
1378 (set_field, deposit_14, deposit_21): Likewise.
1380 Fri Mar 17 15:55:53 1995 J.T. Conklin <jtc@rtl.cygnus.com>
1382 * i386-dis.c: Support for more pentium opcodes. From Guy Harris
1385 Tue Mar 14 00:52:57 1995 Ken Raeburn (raeburn@kr-pc.cygnus.com)
1387 Sat Feb 11 17:22:41 1995 Klaus Kaempf (kkaempf@didymus.rmi.de)
1389 * alpha-opc.h (OSF_ASMCODE): define
1390 print pal-code names as defined in App C of the
1391 Alpha Architecture Reference Manual
1393 * alpha-dis.c: cleaned up output
1394 print stylized code forms as defined in App A.4.3 of the
1395 Alpha Architecture Reference Manual
1397 Wed Mar 8 15:21:14 1995 Ian Lance Taylor <ian@cygnus.com>
1399 * mips-opc.c: Add new mips4 instructions. Don't set INSN_RFE for
1401 * mips-dis.c (print_insn_arg): Handle new argument types 'h', 'R',
1404 Wed Mar 8 02:54:05 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
1406 * m68k-dis.c (opcode): New function. Returns address of opcode
1407 table entry given index, even if the opcode table was split to
1408 work around gcc bugs.
1409 (print_insn_m68k): Call opcode instead of referencing m68k_opcodes
1411 (BREAK_UP_BIG_DECL): Make secondary array static and const.
1412 (reg_names): Now const.
1413 (print_insn_arg): Arrays cacheFieldName and names now const.
1414 (print_indexed): Array scales now const.
1417 Tue Mar 7 21:14:14 1995 Doug Evans <dje@chestnut.cygnus.com>
1419 * arc-dis.c (print_insn_arc_base): Split into big and little fns.
1420 (print_insn_arc_{host,graphics,audio}): Likewise.
1421 (print_insn): Add prototype.
1422 (arc_get_disassembler): New arg `big_p'. Return little or big
1423 print fn accordingly.
1424 * arc-opc.c (arc_opcode_init_tables): Init arc_operand_map once.
1425 (arc_opcode_supported): Use ARC_OPCODE_CPU to ignore byte order.
1426 (arc_opval_supported): Likewise.
1427 * disassemble.c (disassembler): Pass big endian flag to
1428 arc_get_disassembler.
1431 Tue Mar 7 16:41:21 1995 Ian Lance Taylor <ian@cygnus.com>
1433 * ppc-opc.c: Sort recently added instructions by minor opcode
1434 number within major opcode number.
1436 Mon Mar 6 10:04:36 1995 Jeff Law (law@snake.cs.utah.edu)
1438 * hppa-dis.c: Include libhppa.h.
1440 Fri Feb 24 19:15:36 1995 Ian Lance Taylor <ian@cygnus.com>
1442 * mips-opc.c: Change dli to use M_DLI, and add dla.
1444 Mon Feb 20 23:54:38 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1446 * Makefile.in (ALL_MACHINES): Add w65-dis.o.
1449 Fri Feb 17 12:42:25 1995 Doug Evans <dje@chestnut.cygnus.com>
1451 * arc-dis.c (arc_get_disassembler): Change argument to int,
1452 one of bfd_mach_arc_xxx. All callers updated.
1455 Thu Feb 16 17:34:41 1995 Ian Lance Taylor <ian@cygnus.com>
1457 * mips-opc.c: Add r4650 mul instruction.
1459 Wed Feb 15 15:45:20 1995 Ian Lance Taylor <ian@cygnus.com>
1461 * mips-opc.c: Add uld and usd macros for unaligned double load and
1464 Tue Feb 14 13:17:37 1995 Michael Meissner <meissner@tiktok.cygnus.com>
1466 * ppc-opc.c (powerpc_opcodes): Add 403GA opcodes rfci, dccci,
1467 mfdcr, mtdcr, icbt, iccci.
1470 Mon Feb 13 11:09:17 1995 Doug Evans <dje@canuck.cygnus.com>
1472 * arc-dis.c (print_insn): Handle ARC_OPERAND_ADDRESS.
1473 * arc-opc.c (arc_operands): New operand 'J' for jump addresses.
1474 ('L' operand): Mark as ARC_OPERAND_ADDRESS.
1475 (arc_opcodes, j insn): Use 'J' operand type, not 'L'.
1476 (arc_opcodes, ld/st insns): Fix address writeback operand letter.
1477 (insert_absaddr): New function.
1479 Thu Feb 9 19:19:23 1995 Doug Evans <dje@canuck.cygnus.com>
1481 * arc-dis.c (print_insn_arc): Rename to print_insn and make static.
1482 New argument `cpu', pass it to arc_opcode_init_tables.
1483 Document byte order dependencies. Ignore unsupported insns.
1484 (arc_get_disassembler): New function.
1485 (print_insn_arc_base, print_insn_arc_host, print_insn_arc_graphics,
1486 print_insn_arc_audio): New functions.
1487 * arc-opc.c (MULTSHIFT operand): Delete.
1488 (UNSIGNED, SATURATION): New operands.
1489 (mac, mul, mul64, mulu64): New insns.
1490 (ext. asl, asr, lsr, ror): Only available on host and graphics cpus.
1491 (padc, padd, pmov, pand, psbc, psub, swap): New insns.
1492 (host,graphics,audio extended and auxiliary regs): Define.
1493 (ss, sc, mh, ml): New suffixes.
1494 (arc_opcode_supported, arc_opval_supported): New functions.
1495 (insert_multshift, extract_multshift): Deleted.
1496 * disassemble.c (disassembler, case bfd_arch_arc): Call
1497 arc_get_disassembler to get disassembler routine.
1500 Thu Feb 9 12:28:13 1995 Stan Shebs <shebs@andros.cygnus.com>
1502 * i960-dis.c (struct tabent, struct sparse_tabent): Change the
1503 signed char fields to shorts, more portable.
1505 Wed Feb 8 17:29:29 1995 Stan Shebs <shebs@andros.cygnus.com>
1507 * i960-dis.c (struct tabent, struct sparse_tabent): Declare the
1508 char fields as signed chars, since they may have negative values.
1510 Mon Feb 6 10:52:06 1995 J.T. Conklin <jtc@rtl.cygnus.com>
1512 * i386-dis.c (dis386_twobyte): Add cpuid, From Charles Hannum
1513 (mycroft@netbsd.org).
1515 Mon Jan 30 12:38:00 1995 Ian Lance Taylor <ian@cygnus.com>
1517 From "Logg, Ed" <elogg@ea.com>:
1518 * ppc-opc.c (extract_bdm): Correct parenthezisation.
1519 * ppc-dis.c (print_insn_powerpc): Print .long before unrecognized
1522 Thu Jan 26 18:32:08 1995 Ian Lance Taylor <ian@cygnus.com>
1524 * ppc-opc.c: Changes based on patch from David Edelsohn
1525 <edelsohn@mhpcc.edu>.
1526 (powerpc_operands): Add operands SPRBAT and SPRG. Split TBR out of
1529 (insert_tbr): New static function.
1530 (extract_tbr): New static function.
1531 (XFXFXM_MASK, XFXM): Define.
1532 (XSPRBAT_MASK, XSPRG_MASK): Define.
1533 (powerpc_opcodes): Add instructions to access special registers by
1534 name. Add mtcr and mftbu.
1536 Tue Jan 17 10:56:43 1995 Ian Lance Taylor <ian@sanguine.cygnus.com>
1538 * mips-opc.c (P3): Define.
1539 (mips_opcodes): Add mad and madu.
1541 Sun Jan 15 16:32:59 1995 Steve Chamberlain <sac@splat>
1543 * configure.in: Add W65 support.
1544 * disassemble.c: Likewise.
1545 * w65-opc.h, w65-dis.c: New files.
1547 Wed Dec 28 22:15:33 1994 Steve Chamberlain (sac@jonny.cygnus.com)
1549 * h8300-dis.c (bfd_h8_disassemble): Add support for 2 bit
1553 Tue Dec 20 10:36:55 1994 Doug Evans <dje@canuck.cygnus.com>
1555 * arc-dis.c (print_insn_arc): Branch offsets are relative to delay
1557 * arc-opc.c (extract_reladdr): New function.
1558 (insert_reladdr): Store address right-shifted by 2.
1561 Tue Dec 20 11:25:12 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
1563 * mips-opc.c: Add dli as a synonym for li.
1566 Mon Dec 19 12:35:51 1994 Doug Evans <dje@canuck.cygnus.com>
1568 * arc-opc.c (insertion fns): Pass pointer to value's table entry.
1570 (extraction fns): Insn argument now array of two words. Return pointer
1571 to value's table entry. All uses changed.
1572 (arc_opcode_lookup_suffix): Exported for arc-dis.c.
1573 (insert_multshift, extract_multshift): New fns.
1574 (arc_operands): Add support for cache bypass suffix. Add support for
1575 predefined aux regs. Modifier bits moved to flags field.
1576 (arc_opcodes): Likewise.
1577 Add mul/mulu/shift insns. Syntax of zero/sign extension insns changed.
1578 New insn rlc. Update to syntax in programmer's manual.
1579 (arc_reg_names): Fix typo in lp_count. Add predefined aux regs.
1580 (arc_suffixes): New synonyms lo,hs for cs,cc. New suffix for cache
1582 (arc_opcode_init_tables): New argument to indicate cpu type.
1583 (insert_reg): Handle predefined aux regs.
1584 (extract_reg): Likewise.
1585 (lookup_register): New fn.
1586 * arc-dis.c (arc_condition_codes): Deleted.
1587 (print_insn_arc): Handle insns with 32 bit immediate constants better.
1588 Clean up modifier handling. Handle predefined aux regs.
1591 Thu Dec 8 18:23:31 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
1593 * alpha-dis.c (print_insn_alpha): Handle call_pal instruction, and
1594 print something for reserved opcode values, even if it won't
1597 * mips-dis.c (_print_insn_mips): When initializing, shift right
1598 and mask, to avoid sign extension problems on the Alpha.
1600 * m68k-dis.c (print_insn_arg, case 'J'): Handle buscr and pcr
1604 Tue Nov 29 18:02:43 1994 Doug Evans <dje@canuck.cygnus.com>
1606 * configure.in: Add ARC support.
1607 * disassemble.c: Likewise.
1608 * arc-dis.c, arc-opc.c: New files.
1611 Wed Nov 23 22:34:51 1994 Steve Chamberlain (sac@jonny.cygnus.com)
1613 * sh-opc.h (mov.l gbr): Get direction right.
1614 * sh-dis.c (print_insn_shx): New function.
1615 (print_insn_shl, print_insn_sh): Call print_insn_shx to
1616 print opcodes with right byte order.
1618 Thu Nov 3 19:32:22 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
1620 * ns32k-dis.c (struct ns32k_option): Renamed from struct option,
1621 to avoid conflicts with getopt.
1623 Mon Oct 31 18:48:10 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
1625 * hppa-dis.c (print_insn_hppa): Read the instruction using
1626 bfd_getb32, so that it works on a little endian or 64 bit host.
1627 Remove unused local variable op.
1629 Tue Oct 25 17:07:57 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
1631 * mips-opc.c: Use or instead of addu for pseudo-op move, since
1632 addu does not work correctly if -mips3.
1634 Wed Oct 19 13:40:16 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
1636 * a29k-dis.c (print_special): Add special register names defined
1637 on 29030, 29040 and 29050.
1638 (print_insn): Handle new operand type 'I'.
1640 Wed Oct 12 11:59:55 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
1642 * Makefile.in (INSTALL): Use top level install.sh script.
1644 Wed Oct 5 19:16:29 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
1646 * sparc-dis.c: Rewrite to use bitfields, rather than a union, so
1647 that it works on a little endian host.
1649 Tue Oct 4 12:14:21 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
1651 * configure.in: Use ${config_shell} when running config.bfd.
1653 Wed Sep 21 18:49:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
1655 * mips-opc.c (mips_opcodes): "dabs" is only available with -mips3.
1657 Thu Sep 15 16:30:22 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
1659 * a29k-dis.c (print_insn): Print the opcode.
1661 Wed Sep 14 17:52:14 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
1663 * mips-opc.c (mips_opcodes): Set WR_t for sc and scd.
1665 Sun Sep 11 22:32:17 1994 Jeff Law (law@snake.cs.utah.edu)
1667 * hppa-dis.c (reg_names): Use r26-r23 for arg0-arg3.
1669 Tue Sep 6 11:37:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
1671 * mips-opc.c: Set INSN_STORE_MEMORY flag for all instructions
1672 which store a value into memory.
1674 Sun Sep 04 17:58:10 1994 Richard Earnshaw (rwe@pegasus.esprit.ec.org)
1676 * configure.in, Makefile.in, disassemble.c: Add support for the ARM.
1677 * arm-dis.c, arm-opc.h: New files.
1679 Fri Aug 5 14:00:05 1994 Stan Shebs (shebs@andros.cygnus.com)
1681 * Makefile.in (ns32k-dis.o): Add dependency.
1682 * ns32k-dis.c (print_insn_arg): Declare initialized local as
1683 string, not as array of chars.
1685 Thu Jul 28 18:14:16 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
1687 * sparc-dis.c (print_insn_sparc): Handle new operand type 'x'.
1689 * sparc-opc.c: Added sparclite extended FP operations, and
1690 versions of v9 impdep* instructions permitting specification of
1693 Tue Jul 26 16:36:03 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
1695 * i960-dis.c (reg_names): Now const.
1696 (struct sparse_tabent): New type, copied from array type in mem
1698 (ctrl): Local static array ctrl_tab now const.
1699 (cobr): Local static array cobr_tab now const.
1700 (mem): Local variables reg1, reg2, reg3 now point to const. Local
1701 static variable mem_tab no longer explicitly initialized. Changed
1702 mem_init to const array of struct sparse_tabent.
1703 (reg): Local static variable reg_tab no longer explicitly
1704 initialized. Changed reg_init to const array of struct
1706 (ea): Local static array scale_tab now const.
1708 * i960-dis.c (reg): Added i960JX instructions to reg_init table.
1711 Tue Jul 19 21:00:00 1994 DJ Delorie (dj@ctron.com)
1713 * configure.bat: the disassember needs to be enabled for
1714 "objdump -d" to work in djgpp.
1716 Wed Jul 13 18:01:58 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
1718 * ns32k-dis.c: Deleted all code in "#ifdef GDB".
1719 (invalid_float): Enabled general version, doesn't require running
1720 on ns32k host. Changed to take char* argument, and test for
1721 explicitly specified sizes, instead of using sizeof() on host CPU
1723 (INVALID_FLOAT): Cast first argument.
1724 (opt_u, opt_U, opt_O, opt_C, opt_S, list_P532, list_M532,
1725 list_P032, list_M032): Now const.
1726 (optlist, list_search): Made appropriate arguments now point to
1728 (print_insn_arg): Changed static array of one-character-string
1729 pointers into a static const array of characters; fixed sprintf
1730 statement accordingly.
1732 Sun Jul 10 00:27:47 1994 Ian Dall (dall@hfrd.dsto.gov.au)
1734 * opcodes/ns32k-dis.c: Semi-new file. Had apparently been dropped
1735 from distribution. A ns32k-dis.c from a previous distribution has
1736 been brought up to date and supports the new interface.
1738 * disassemble.c: define ARCH_ns32k and add case bfd_arch_ns32k.
1740 * configure.in: add bfd_ns32k_arch target support.
1742 * Makefile.in: add ns32k-dis.o to ALL_MACHINES.
1743 Add ns32k-dis.c to CFILES. Add dependencies for ns32k-dis.o.
1745 Wed Jun 29 22:10:37 1994 Steve Chamberlain (sac@cygnus.com)
1747 * h8300-dis.c (bfd_h8_disassemble): Get 16bit branch
1750 Tue Jun 28 13:22:06 1994 Stan Shebs (shebs@andros.cygnus.com)
1752 * h8300-dis.c, mips-dis.c: Don't use true and false.
1754 Thu Jun 23 12:53:19 1994 David J. Mackenzie (djm@rtl.cygnus.com)
1756 * configure.in: Change --with-targets to --enable-targets.
1758 Wed Jun 22 13:38:32 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
1760 * mips-dis.c (_print_insn_mips): Build a static hash table mapping
1761 opcodes to the first instruction with that opcode, to speed
1762 disassembly of large files. From ralphc@pyramid.com (Ralph
1765 Tue Jun 7 12:49:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1767 * Makefile.in (mostlyclean): Fix typo (was mostyclean).
1769 Wed May 11 22:32:00 1994 DJ Delorie (dj@ctron.com)
1771 * configure.bat: update to latest makefile.in
1773 Sat May 7 17:13:21 1994 Steve Chamberlain (sac@cygnus.com)
1775 * a29k-dis.c (print_insn): Print 'x' type operand in hex.
1776 * h8300-dis.c (bfd_h8_disassemble): Print 16bit rels correctly.
1777 * sh-dis.c (print_insn_sh): Don't recur endlessly if delay
1778 slot insn is in a delay slot.
1779 * z8k-opc.h: (resflg): Fix patterns.
1780 * h8500-opc.h Fix CR insn patterns.
1782 Fri May 6 14:34:46 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1784 * ppc-opc.c (powerpc_opcodes): Put PowerPC versions of "cmp" and
1785 "cmpl" before POWER versions, so that gas -many uses them.
1787 Thu Apr 28 18:32:36 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
1789 * disassemble.c: New file.
1790 * Makefile.in (OFILES): Add disassemble.o.
1791 (disassemble.o): Provide dependencies; compile with $(ARCHDEFS).
1792 * configure.in: Define ARCHDEFS in Makefile. Code taken from
1793 binutils/configure.in.
1795 * m68k-dis.c (print_insn_m68k): If F_ALIAS flag is set, skip the
1796 opcode being examined.
1798 Thu Apr 21 17:08:40 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1800 * ppc-opc.c (powerpc_operands): Added RAL, RAM and RAS.
1801 (insert_ral, insert_ram, insert_ras): New functions.
1802 (powerpc_opcodes): Use RAL for load with update, RAM for lmw, and
1803 RAS for store with update.
1805 Sat Apr 16 23:41:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1807 * ppc-opc.c (powerpc_opcodes): Correct fcir. From David Edelsohn
1808 (edelsohn@npac.syr.edu).
1810 Wed Apr 6 17:11:45 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1812 * mips-opc.c (mips_opcodes): Correct operands of "nor" with an
1815 Mon Apr 4 16:30:46 1994 Doug Evans (dje@canuck.cygnus.com)
1817 * sparc-opc.c (sparc_opcodes): Fix "rd %fprs,%l0".
1819 Mon Apr 4 13:22:00 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1821 * ppc-opc.c (powerpc_operands): The signedp field has been
1822 removed, so don't initialize it. Set the PPC_OPERAND_SIGNED flag
1823 instead. Add new operand SISIGNOPT.
1824 (powerpc_opcodes): For lis, liu, addis, and cau use SISIGNOPT.
1825 Based on patch from David Edelsohn (edelsohn@npac.syr.edu).
1826 * ppc-dis.c (print_insn_powerpc): Check PPC_OPERAND_SIGNED rather
1829 Wed Mar 30 00:31:49 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1831 * i386-dis.c (struct private): Renamed to dis_private. `private'
1832 is a reserved word for dynix cc.
1834 Mon Mar 28 13:00:15 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1836 * configure.in: Change error message to refer to bfd/config.bfd
1837 rather than bfd/configure.in.
1839 Mon Mar 28 12:28:30 1994 David Edelsohn (edelsohn@npac.syr.edu)
1841 * ppc-opc.c: Define POWER2 as short alias flag.
1842 (powerpc_opcodes): Add POWER/2 opcodes lfq*, stfq*, fcir[z], and
1845 Wed Mar 23 12:23:05 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1847 * i960-dis.c (print_insn_i960): Don't read a second word for
1848 opcodes 0, 1, 2 and 3.
1850 Wed Mar 16 15:37:58 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1852 * configure.in: Don't build m68881-ext.o for bfd_m68k_arch.
1854 Mon Mar 14 14:53:50 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1856 * m68881-ext.c: Removed; no longer used.
1857 * Makefile.in: Changed accordingly.
1859 * m68k-dis.c (ext_format_68881): Don't declare.
1860 (print_insn_m68k): If an instruction uses place 'i', it uses at
1861 least four fixed bytes.
1862 (print_insn_arg): Don't bump p by 2 for case 'I', place 'i'. For
1863 extended float, convert to double using floatformat_to_double, not
1864 ieee_extended_to_double, and fetch the data before converting it.
1866 Tue Mar 8 18:12:25 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1868 * mips-opc.c: It's sqrt.s, not sqrt.w. From
1869 davidj@ICSI.Berkeley.EDU (David Johnson).
1871 Tue Feb 8 16:55:27 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1873 * ppc-opc.c (powerpc_opcodes): The POWER uses bdn[l][a] where the
1874 PowerPC uses bdnz[l][a].
1876 Tue Feb 8 00:32:28 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1878 * dis-buf.c, i386-dis.c: Include sysdep.h.
1880 Mon Feb 7 19:22:23 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1882 * configure.in (bfd_powerpc_arch): Use ppc-dis.o and ppc-opc.o.
1884 * ppc-opc.c (powerpc_opcodes): Mark POWER instructions supported
1885 by Motorola PowerPC 601 with PPC_OPCODE_601.
1886 * ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc):
1887 Disassemble Motorola PowerPC 601 instructions as well as normal
1888 PowerPC instructions.
1890 Sun Feb 6 07:45:17 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
1892 * i960-dis.c (reg, mem): Just use a static array instead of
1895 Sat Feb 5 00:04:02 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
1897 * hppa-dis.c (print_insn_hppa): For '?' and '@' only adjust the
1898 condition name index if this is for a negated condition.
1900 * hppa-dis.c (print_insn_hppa): No space before 'H' operand.
1901 Floating point format for 'H' operand is backwards from normal
1902 case (0 == double, 1 == single). For '4', '6', '7', '9', and '8'
1903 operands (fmpyadd and fmpysub), handle bizarre register
1904 translation correctly for single precision format.
1906 * hppa-dis.c (print_insn_hppa): Do not emit a space after 'F'
1907 or 'I' operands if the next format specifier is 'M' (fcmp
1908 condition completer).
1910 Feb 4 23:38:03 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1912 * ppc-opc.c (powerpc_operands): New operand type MBE to handle a
1913 single number giving a bitmask for the MB and ME fields of an M
1914 form instruction. Change NB to accept 32, and turn it into 0;
1915 also turn 0 into 32 when disassembling. Seperated SH from NB.
1916 (insert_mbe, extract_mbe): New functions.
1917 (insert_nb, extract_nb): New functions.
1918 (SC_MASK): Mask out SA and LK bits.
1919 (powerpc_opcodes): Change "cal" to use RT, D, RA rather than RT,
1920 RA, SI. Change "liu" and "cau" to use UI rather than SI. Mark
1921 "bctr" and "bctrl" as accepted by POWER. Change "rlwimi",
1922 "rlimi", "rlwimi.", "rlimi.", "rlwinm", "rlinm", "rlwinm.",
1923 "rlinm.", "rlmi", "rlmi.", "rlwnm", "rlnm", "rlwnm.", "rlnm." to
1924 use MBE rather than MB. Add "mfmq" and "mtmq" POWER instructions.
1925 (powerpc_macros): Define table of macro definitions.
1926 (powerpc_num_macros): Define.
1928 * ppc-dis.c (print_insn_powerpc): Don't skip optional operands
1929 if PPC_OPERAND_NEXT is set.
1931 Sat Jan 22 23:10:07 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1933 * i960-dis.c (print_insn_i960): Make buffer bfd_byte instead of
1934 char. Retrieve contents using bfd_getl32 instead of shifting.
1936 Fri Jan 21 19:01:39 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1938 * ppc-opc.c: New file. Opcode table for PowerPC, including
1939 opcodes for POWER (RS/6000).
1940 * ppc-dis.c: New file. PowerPC and Power (RS/6000) disassembler.
1941 * Makefile.in (ALL_MACHINES): Add ppc-dis.o and ppc-opc.o.
1942 (CFILES): Add ppc-dis.c.
1943 (ppc-dis.o, ppc-opc.o): New targets.
1944 * configure.in: Build ppc-dis.o and ppc-opc.o for bfd_rs6000_arch.
1946 Mon Jan 17 20:05:49 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
1948 * hppa-dis.c (print_insn_hppa): Handle 'N' in assembler template.
1949 No space before 'u', 'f', or 'N'.
1951 Sun Jan 16 14:20:16 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
1953 * i386-dis.c (print_insn_i386): Add FIXME comment regarding reading
1954 farther than we should.
1956 * i386-dis.c (dis386): Use Yb and Yv for scasb and scasS.
1958 Thu Jan 6 12:38:05 1994 David J. Mackenzie (djm@thepub.cygnus.com)
1960 * sparc-dis.c m68k-dis.c alpha-dis.c a29k-dis.c: Fix comments.
1962 Wed Jan 5 11:56:21 1994 David J. Mackenzie (djm@thepub.cygnus.com)
1964 * i960-dis.c (print_insn_i960): Only read word2 if the instruction
1965 needs it, to prevent reading past the end of a section.
1967 Wed Nov 17 17:20:12 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1969 * mips-opc.h: Use macro for j instruction, to support SVR4 PIC.
1970 Removed t,A case for la; always use t,A(b) case.
1972 Mon Nov 8 12:37:36 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1974 From Ted Lemen <mellon@pepper.ncd.com>
1975 * mips-dis.c (print_insn_arg): Handle 'k'.
1976 * mips-opc.c: Make cache use k, not t.
1978 Sun Nov 7 23:52:34 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1980 * alpha-opc.h, alpha-dis.c (print_insn_alpha): Add
1981 FLOAT_MEMORY_FORMAT_CODE, FLOAT_BRANCH_FORMAT_CODE, correct
1982 FLOAT_FORMAT_CODE to put out floating point register names.
1984 Mon Nov 1 18:17:51 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1986 * mips-opc.c: Use macros for jal variants, to support SVR4 PIC.
1988 Thu Oct 28 17:42:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1990 * a29k-dis.c (print_insn): Use 0x%08x, not 0x%8x.
1992 Wed Oct 27 11:48:01 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
1994 * mips-opc.c (dsll, dsra, dsrl): Added '>' cases for shift counts
1995 larger than 32. Moved dsxx32 variants first for disassembler.
1997 Mon Oct 25 11:33:14 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
1999 * z8kgen.c, z8k-opc.h: Add full lda information.
2001 Tue Oct 19 12:39:25 1993 Jeffrey A Law (law@cs.utah.edu)
2003 * hppa-dis.c (print_insn_hppa): Do not emit a space after
2004 movb instructions. Any necessary space will be emitted by
2005 the code to handle nullification completers.
2007 Wed Oct 13 16:19:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2009 * mips-opc.c: Moved l.d down so that it disassembles as ldc1.
2011 Fri Oct 8 02:34:21 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2013 * alpha-opc.h: Add ldl_l, fix typo for ldq_u.
2014 * alpha-dis.c (print_insn_alpha): Add code for PAL_FORMAT_CODE.
2016 Tue Oct 5 17:47:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2018 * mips-opc.c: Correct lwu opcode value (book had it wrong).
2020 Thu Sep 30 11:26:18 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
2022 * z8k-dis.c (FETCH_DATA): get just the right amount of data.
2023 (unpack_instr): Cope with ARG_IMM4M1 type instructions.
2025 Wed Sep 29 16:24:49 1993 K. Richard Pixley (rich@sendai.cygnus.com)
2027 * m88k-dis.c (m88kdis): comment change. Remove space after
2029 (printop): handle new arg types DEC and XREG for m88110.
2031 Tue Sep 28 19:20:16 1993 Jeffrey A Law (law@snake.cs.utah.edu)
2033 * hppa-dis.c (print_insn_hppa): Handle 'z' operand
2034 type for absolute branch addresses. Delete special
2035 "ble" and "be" code in 'W' operand code.
2037 Fri Sep 24 14:08:33 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2039 * mips-opc.c: Set hazard information correctly for branch
2040 likely instructions.
2042 Fri Sep 17 04:41:17 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2044 * alpha-dis.c (print_insn_alpha), alpha-opc.h: Fix bugs, use
2045 info->fprintf_func for printing and info->print_address_func for
2048 Wed Sep 15 12:12:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2050 * mips-opc.c: Set INSN_TRAP for tXX instructions.
2052 Thu Sep 9 10:11:27 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2054 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson):
2055 Corrected second case of "b" for disassembler.
2057 Tue Sep 7 14:25:15 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2059 * mips-dis.c, m88k-dis.c: Don't include libbfd.h. Changed calls
2060 to BFD swapping routines to correspond to BFD name changes.
2062 Thu Sep 2 10:35:25 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2064 * mips-opc.c: Change div machine instruction to be z,s,t rather
2065 than s,t. Change div macro to be d,v,t rather than d,s,t.
2066 Likewise for divu, ddiv, ddivu. Added z,s,t case for drem, dremu,
2067 rem and remu which generates only the corresponding div
2068 instruction. This is for compatibility with the MIPS assembler,
2069 which only generates the simple machine instruction when an
2070 explicit destination of $0 is used.
2071 * mips-dis.c (print_insn_arg): Handle 'z' (always register zero).
2073 Thu Aug 26 17:41:44 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2075 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Set
2076 WR_31 hazard for bal, bgezal, bltzal.
2078 Thu Aug 26 17:20:02 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
2080 * hppa-dis.c (print_insn_hppa): Use print function
2081 from within the disassemble_info, not fprintf_filtered.
2083 Wed Aug 25 13:51:40 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
2085 * hppa-dis.c (print_insn_hppa): Handle '|' like '>'. (From Jeff
2086 Law, law@cs.utah.edu.)
2088 Mon Aug 23 12:44:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2090 * mips-opc.c ("absu"): Removed.
2093 Fri Aug 20 10:52:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2095 * mips-opc.c: Added r6000 and r4000 instructions and macros.
2096 Changed hazard information to distinguish between memory load
2097 delays and coprocessor load delays.
2099 Wed Aug 18 15:39:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2101 * mips-opc.c: li.d uses "T,L", not "S,F". Added li.s.
2103 Tue Aug 17 09:44:42 1993 David J. Mackenzie (djm@thepub.cygnus.com)
2105 * configure.in: Don't pass cpu to config.bfd.
2107 Tue Aug 17 12:23:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2109 * m88k-dis.c (m88kdis): Make class unsigned.
2111 Thu Aug 12 15:08:18 1993 Ian Lance Taylor (ian@cygnus.com)
2113 * alpha-dis.c (print_insn_alpha): One branch format case was
2114 missing the instruction name.
2116 Wed Aug 11 19:29:39 1993 David J. Mackenzie (djm@thepub.cygnus.com)
2118 * Makefile.in (ALL_MACHINES): Renamed from DIS_LIBS.
2119 Add the arch-specific auxiliary files.
2120 (OFILES): Remove the arch-specific auxiliary files
2121 and use BFD_MACHINES instead of DIS_LIBS.
2122 * configure.in: Set BFD_MACHINES based on --with-targets option.
2124 Thu Aug 12 12:04:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2126 * mips-opc.c: Added lwc1 E,A(b) to go with lwc1 T,A(b). Similarly
2129 Sun Aug 8 15:09:30 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
2131 * sparc-opc.c: Change CONST to const to deal with gcc
2132 -Dconst=__const -traditional.
2134 Fri Aug 6 10:58:55 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2136 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Took
2137 coprocessor instructions out of #if 0, and made them use new
2140 Thu Aug 5 17:11:06 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
2142 * sparc-dis.c: Include ansidecl.h before opcodes/sparc.h.
2144 Fri Jul 30 18:48:15 1993 John Gilmore (gnu@cygnus.com)
2146 * sparc-opc.c: Add F_JSR, F_UNBR, or F_CONDBR flags to each branch
2147 instruction, for use by the disassembler.
2149 * sparc-dis.c (SEX): Add sign extension macro. Replace many
2150 hand-coded sign extensions that depended on 32-bit host ints.
2151 FIXME, we still depend on big-endian host bitfield ordering.
2152 (sparc_print_insn): Set the insn_info_valid field, and the
2153 other fields that describe the instruction being printed.
2155 Tue Jul 27 17:04:58 1993 Jim Wilson (wilson@sphagnum.cygnus.com)
2157 * sparc-opc.c (call): Accept all 6 addressing modes valid for
2158 `jmp' instead of just one of them.
2160 Wed Jul 21 11:43:32 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
2162 * hppa-dis.c: Move floating registers from reg_names to fp_reg_names.
2163 (fput_fp_reg_r): Renamed from fput_reg_r.
2164 (fput_fp_reg): New function.
2165 (print_insn_hppa): Use fput_fp_reg{,_r} where appropriate.
2167 * hppa-dis.c (print_insn_hppa, cases 'a', 'd'): Print space afterwards.
2169 * hppa-dis.c (print_insn_hppa, case 'd'): Use GET_COND not GET_FIELD.
2171 Mon Jul 19 13:52:21 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
2173 * hppa-dis.c (print_insn_hppa): Use extract_5r_store for 'r'.
2175 * hppa-dis.c (print_insn_hppa, case '>'): If next character is 'n',
2176 don't output a space.
2178 * hppa-dis.c (float_format_names): 10 is undefined, and 11 is quad.
2180 Sun Jul 18 16:30:02 1993 Jim Kingdon (kingdon@rtl.cygnus.com)
2182 * mips-opc.c: New file, containing opcode table from
2183 ../include/opcode/mips.h.
2184 * Makefile.in: Add it.
2186 Thu Jul 15 12:37:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2188 * m88k-dis.c: New file, moved in from gdb and changed to use the
2189 new dis-asm.h disassembler interface.
2190 * Makefile.in (DIS_LIBS): Added m88k-dis.o.
2191 (m88k-dis.o): New target.
2193 Tue Jul 13 10:04:16 1993 Ian Lance Taylor (ian@cygnus.com)
2195 * mips-dis.c (print_insn_arg, _print_insn_mips): Made pointer to
2196 argument string const char * to correspond to opcode/mips.h.
2198 Tue Jul 6 15:18:37 1993 Ian Lance Taylor (ian@cygnus.com)
2200 * mips-dis.c: Updated to account for name changes in new version
2202 * Makefile.in: Added header file dependencies.
2204 Sat Jul 3 23:47:56 1993 Doug Evans (dje@canuck.cygnus.com)
2206 * h8300-dis.c (bfd_h8_disassemble): Correct fetching of instruction.
2208 Thu Jul 1 12:23:38 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
2210 * m68k-dis.c (NEXTWORD, NEXTLONG): Use ((x) ^ 0x8000) - 0x8000 to sign
2211 extend, rather than shifts.
2213 Sun Jun 20 20:56:56 1993 Ken Raeburn (raeburn@poseidon.cygnus.com)
2215 * Makefile.in: Undo 15 June change.
2217 Fri Jun 18 14:15:15 1993 Per Bothner (bothner@deneb.cygnus.com)
2219 * m68k-dis.c (print_insn_arg): Change return value to byte count
2221 * m68k-dis.c: Re-write to detect invalid operands before
2222 printing anything, so we can handle this the same way we
2223 handle invalid opcodes.
2225 Thu Jun 17 15:01:36 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
2227 * sh-dis.c, sh-opc.h: Understand some more opcodes.
2229 Wed Jun 16 13:48:05 1993 Ian Lance Taylor (ian@cygnus.com)
2231 * hppa-dis.c: Include <ansidecl.h> and sysdep.h before other
2234 Tue Jun 15 21:45:26 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
2236 * sparc-dis.c: Don't declare qsort, since sysdep.h might.
2238 * configure.in: Do make sysdep.h link.
2239 * Makefile.in: Search ../include. Don't search ../bfd.
2241 Tue Jun 15 13:36:10 1993 Stu Grossman (grossman@cygnus.com)
2243 Changes from Jeff Law, law@cs.utah.edu:
2244 * hppa-dis.c: Fix typo. 'a' and 'd' were reversed.
2245 Do not print a space before the completers specified by
2248 Fri Jun 11 18:40:21 1993 Ken Raeburn (raeburn@cygnus.com)
2250 * mips-dis.c: No longer need to bomb out if HOST_64_BIT is
2251 defined, since gdb has been fixed.
2253 Changes from Jeff Law, law@cs.utah.edu:
2254 * hppa-dis.c (print_insn_hppa): Last argument to fput_reg,
2255 fput_reg_r, fput_creg, fput_const, and fputs_filtered should
2256 be a *disassemble_info, not a *FILE.
2257 * hppa-dis.c: Support 'd', '!', and 'a'.
2258 * hppa-dis.c: Support 's' to extract a 2 bit space register.
2259 * hppa-dis.c: Delete cases which are no longer needed.
2261 Fri Jun 11 07:53:48 1993 Jim Kingdon (kingdon@cygnus.com)
2263 * m68k-dis.c (print_insn_{m68k,arg}): Add MMU codes.
2265 Tue Jun 8 12:25:01 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
2267 * h8300-dis.c: New file, removed from bfd/cpu-h8300.c, with
2270 Mon Jun 7 12:58:49 1993 Per Bothner (bothner@rtl.cygnus.com)
2272 * Makefile.in (CSEARCH): Add -I../bfd for sysdep.h and bfd.h.
2273 * configure.in: No longer need to configure to get sysdep.h.
2275 Thu Jun 3 15:56:49 1993 Stu Grossman (grossman@cygnus.com)
2277 * Patches from Jeffrey Law <law@cs.utah.edu>.
2278 * hppa-dis.c: Support 'I', 'J', and 'K' in output
2279 templates for 1.1 FP computational instructions.
2281 Tue May 25 13:05:48 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
2283 * h8500-dis.c (print_insn_h8500): Address argument is type
2285 * z8k-dis.c (print_insn_z8k, print_insn_z8001, print_insn_z8002):
2288 * h8500-opc.h (addr_class_type): No comma at end of enumerator.
2289 * sh-opc.h (sh_nibble_type, sh_arg_type): Ditto.
2291 * sparc-dis.c (compare_opcodes): Move static declaration to
2294 Fri May 21 14:17:37 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2296 * sparc-dis.c (print_insn_sparc): Implement 'n' argument for unimp
2297 instruction, remove unimp hack from 'l' argument.
2299 Wed May 19 15:35:54 1993 Stu Grossman (grossman@cygnus.com)
2301 * z8k-dis.c (fetch_data): Use unsigned char to make ancient gcc's
2304 Fri May 14 15:22:46 1993 Ian Lance Taylor (ian@cygnus.com)
2306 * Based on patches from davidj@ICSI.Berkeley.EDU (David Johnson):
2307 * mips-dis.c (print_insn_arg): Handle 'C' for general coprocessor
2310 Fri May 14 00:09:14 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
2312 * hppa-dis.c: Include dis-asm.h before sysdep.h. Changed some
2313 arrays of string pointers to 2-d arrays of chars, to save
2316 Thu May 6 20:51:17 1993 Fred Fish (fnf@cygnus.com)
2318 * a29k-dis.c, alpha-dis.c, i960-dis.c, sparc-dis.c, z8k-dis.c:
2319 Cast second arg to read_memory_func to "bfd_byte *", as necessary.
2321 Tue May 4 20:31:10 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
2323 * hppa-dis.c: New file from Utah, adapted to new disassembler
2325 * Makefile.in: Include it.
2327 Mon Apr 26 18:17:42 1993 Steve Chamberlain (sac@thepub.cygnus.com)
2329 * sh-dis.c, sh-opc.h: New files.
2331 Fri Apr 23 18:51:22 1993 Steve Chamberlain (sac@thepub.cygnus.com)
2333 * alpha-dis.c, alpha-opc.h: New files.
2335 Tue Apr 6 12:54:08 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2337 * mips-dis.c: Sign extend 'j' and 'b' arguments, delta is a signed
2340 Mon Apr 5 17:37:37 1993 John Gilmore (gnu@cygnus.com)
2342 * sparc-dis.c: Make "ta" the default trap instruction, "t" the alias.
2344 Fri Apr 2 07:24:27 1993 Ian Lance Taylor (ian@cygnus.com)
2346 * a29k-dis.c, sparc-dis.c, sparc-opc.c: Use CONST rather than
2349 Thu Apr 1 11:20:43 1993 Jim Kingdon (kingdon@cygnus.com)
2351 * sparc-dis.c: Use fprintf_func a few places where I forgot,
2352 and double percent signs a few places.
2354 * a29k-dis.c, i960-dis.c: New, merged from gdb and binutils.
2356 * i386-dis.c, m68k-dis.c, mips-dis.c, sparc-dis.c:
2357 Use info->print_address_func not print_address.
2359 * dis-buf.c (generic_print_address): New function.
2361 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
2363 * Makefile.in: Add sparc-dis.c.
2364 sparc-dis.c: New file, merges binutils and gdb versions as follows:
2366 Add `add' instruction to the set that get checked
2367 for a preceding `sethi' in order to print an absolute address.
2368 * (print_insn): Disassembly prefers real instructions.
2369 (is_delayed_branch): Speed up.
2370 * sparc-opcode.h: Add ALIAS bit to aliases. Fix up opcode tables.
2371 Still missing some float ops, and needs testing.
2372 * sparc-pinsn.c (print_insn): Eliminate 'set' test, subsumed by
2373 F_ALIAS. Use printf, not fprintf, when not passing a file
2375 (compare_opcodes): Check that identical instructions have
2376 identical opcodes, complain otherwise.
2379 * Include reg_names.
2381 Use dis-asm.h/read_memory_func interface.
2383 Wed Mar 31 20:49:06 1993 K. Richard Pixley (rich@rtl.cygnus.com)
2385 * h8500-dis.c, i386-dis.c, m68k-dis.c, z8k-dis.c (fetch_data):
2386 deliberately return non-zero to setjmp from longjmp. Otherwise
2387 this code fails to compile.
2389 Wed Mar 31 17:04:31 1993 Stu Grossman (grossman@cygnus.com)
2391 * m68k-dis.c: Fix prototype for fetch_arg().
2393 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
2395 * dis-buf.c: New file, for new read_memory_func interface.
2396 Makefile.in (OFILES): Include it.
2397 m68k-dis.c, i386-dis.c, h8500-dis.c, mips-dis.c, z8k-dis.c:
2398 Use new read_memory_func interface.
2400 Mon Mar 29 14:02:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
2402 * h8500-dis.c (print_insn_h8500): Get sign of fp offsets right.
2403 * h8500-opc.h: Fix couple of opcodes.
2405 Wed Mar 24 02:03:36 1993 david d `zoo' zuhn (zoo at poseidon.cygnus.com)
2407 * Makefile.in: add dvi & installcheck targets
2409 Mon Mar 22 18:55:04 1993 John Gilmore (gnu@cygnus.com)
2411 * Makefile.in: Update for h8500-dis.c.
2413 Fri Mar 19 14:27:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
2415 * h8500-dis.c, h8500-opc.h: New files
2417 Thu Mar 18 14:12:37 1993 Per Bothner (bothner@rtl.cygnus.com)
2419 * mips-dis.c, z8k-dis.c: Converted to use interface defined in
2420 ../include/dis-asm.h.
2421 * m68k-dis.c: New file (merge of ../binutils/m68k-pinsn.c
2422 and ../gdb/m68k-pinsn.c).
2423 * i386-dis.c: New file (merge of ../binutils/i386-pinsn.c
2424 and ../gdb/i386-pinsn.c).
2425 * m68881-ext.c: New file. Moved definition of
2426 ext_format ext_format_68881 from ../gdb/m68k-tdep.c.
2427 * Makefile.in: Adjust for new files.
2428 * i386-dis.c: Patches from John Hassey (hassey@dg-rtp.dg.com).
2429 * m68k-dis.c: Recognize '9' placement code, so (say) pflush
2430 can be dis-assembled.
2432 Wed Feb 17 09:19:47 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
2434 * mips-dis.c (print_insn_arg): Now returns void.
2436 Mon Jan 11 16:09:16 1993 Fred Fish (fnf@cygnus.com)
2438 * mips-dis.c (ansidecl.h): Include for benefit of sysdep.h
2439 files that use the macros.
2441 Thu Jan 7 13:15:17 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2443 * mips-dis.c: New file, from gdb/mips-pinsn.c.
2444 * Makefile.in (DIS_LIBS): Added mips-dis.o.
2445 (CFILES): Added mips-dis.c.
2447 Thu Jan 7 07:36:33 1993 Steve Chamberlain (sac@thepub.cygnus.com)
2449 * z8k-dis.c (print_insn_z8001, print_insn_z8002): new routines
2450 * z8kgen.c, z8k-opc.h: fix sizes of some shifts.
2452 Tue Dec 22 15:42:44 1992 Per Bothner (bothner@rtl.cygnus.com)
2454 * Makefile.in: Improve *clean rules.
2455 * configure.in: Allow a default host.
2457 Tue Nov 17 19:53:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
2459 * Makefile.in: also use -I$(srcdir)/../bfd, since some sysdep
2460 files include other sysdep files
2462 Thu Nov 12 16:10:37 1992 Steve Chamberlain (sac@thepub.cygnus.com)
2464 * z8k-dis.c z8k-opc.h z8kgen.c: checkpoint
2466 Fri Oct 9 04:56:05 1992 John Gilmore (gnu@cygnus.com)
2468 * configure.in: For host support, use ../bfd/configure.host
2469 so it stays in sync with the ../bfd/hosts database.
2471 Thu Oct 1 23:38:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
2473 * configure.in: use cpu-vendor-os triple instead of nested cases
2475 Wed Sep 30 16:09:20 1992 Michael Werner (mtw@cygnus.com)
2477 * z8k-dis.c (unparse_instr): fix bug where opcode returned was
2478 *always* the wrong one.
2480 Wed Sep 30 07:42:17 1992 Steve Chamberlain (sac@thepub.cygnus.com)
2482 * z8kgen.c: added copyright info
2484 Tue Sep 29 12:20:21 1992 Steve Chamberlain (sac@thepub.cygnus.com)
2486 * z8k-dis.c (unparse_instr): prettier tabs
2487 * z8kgen.c -> z8k-opc.h: bug fixes in tables
2489 Fri Sep 25 12:50:32 1992 Stu Grossman (grossman at cygnus.com)
2491 * configure.in: Add ncr* configuration.
2492 * z8k-dis.c (struct instr_data_s): Make instr_asmsrc char to make
2493 picayune ANSI compilers happy.
2495 Sep 20 08:50:55 1992 Fred Fish (fnf@cygnus.com)
2497 * configure.in (i386): Make i386 and i486 synonymous for now.
2498 * configure.in (i[34]86-*-sysv4): Add my_host definition.
2500 Fri Sep 18 17:01:23 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
2502 * Makefile.in (install): Fix typo.
2504 Fri Sep 18 02:04:24 1992 John Gilmore (gnu@cygnus.com)
2506 * Makefile.in (make): Remove obsolete crud.
2507 (sparc-opc.o): Avoid Sun Make VPATH bug.
2509 Tue Sep 8 17:29:27 1992 K. Richard Pixley (rich@sendai.cygnus.com)
2511 * Makefile.in: since there are no SUBDIRS, remove rule and
2512 references of subdir_do.
2514 Tue Sep 8 17:02:58 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
2516 * Makefile.in (install): Get the library name right here too.
2517 Don't install bfd.h, since it's unrelated to this library. No
2518 subdirs to recurse into, either.
2519 (CFILES): The source file has a .c suffix, not .o.
2521 * sparc-opc.c: New file, moved from BFD.
2522 * Makefile.in (OFILES): Build it.
2524 Thu Sep 3 16:59:20 1992 Michael Werner (mtw@cygnus.com)
2526 * z8k-dis.c: fixed forward refferences of some declarations.
2528 Mon Aug 31 16:09:45 1992 Michael Werner (mtw@cygnus.com)
2530 * Makefile.in: get the name of the library right
2532 Mon Aug 31 13:47:35 1992 Steve Chamberlain (sac@thepub.cygnus.com)
2534 * z8k-dis.c: knows how to disassemble z8k stuff
2535 * z8k-opc.h: new file full of z8000 opcodes
2539 version-control: never
projects / deliverable / binutils-gdb.git / blob