opcodes/ChangeLog

   1 Thu Oct 23 21:13:37 1997  Fred Fish  <fnf@cygnus.com>
   2
   3         * d10v-opc.c (d10v_opcodes): Correct entry for RTE.
   4
   5 Mon Dec  8 11:21:07 1997  Nick Clifton  <nickc@cygnus.com>
   6
   7         * disassemble.c: Remove disasm_symaddr() function.
   8
   9         * arm-dis.c: Use info->symbol instead of info->flags to determine
  10         if disassmbly should be in Thumb or Arm mode.
  11
  12 Tue Dec  2 09:54:27 1997  Nick Clifton  <nickc@cygnus.com>
  13
  14         * arm-dis.c: Add support for disassembling Thumb opcodes.
  15         (print_insn_thumb): New function.
  16
  17         * disassemble.c (disasm_symaddr): New function.
  18
  19         * arm-opc.h: Display nop pseudo ops alongside equivalent disassembly.
  20         (thumb_opcodes): Table of Thumb opcodes.
  21
  22 Mon Dec  1 12:25:57 1997  Andreas Schwab  <schwab@issan.informatik.uni-dortmund.de>
  23
  24         * m68k-opc.c (btst): Change Dd@s to Dd;b.
  25
  26         * m68k-dis.c (print_insn_arg): Recognize 'm', 'n', 'o', 'p', 'q',
  27         and 'v' as operand types.
  28
  29 Mon Dec  1 11:56:50 1997  Ian Lance Taylor  <ian@cygnus.com>
  30
  31         * m68k-opc.c: Add argument for lpstop.  From Olivier Carmona
  32         <olivier.carmona@di.epfl.ch>.
  33         * m68k-dis.c (print_insn_m68k): Handle special case of lpstop,
  34         which has a two word opcode with a one word argument.
  35
  36 start-sanitize-d30v
  37 Sun Nov 23 22:25:21 1997  Michael Meissner  <meissner@cygnus.com>
  38
  39         * d30v-opc.c (d30v_opcode_table, case cmpu): Immediate field is
  40         unsigned, not signed.
  41         (d30v_format_table): Add SHORT_CMPU cases for cmpu.
  42
  43 end-sanitize-d30v
  44 start-sanitize-sh4
  45 Wed Nov 19 17:42:35 1997  Richard Henderson  <rth@cygnus.com>
  46
  47         * sh-dis.c (print_insn_shx): Recognize all sh4 additions.
  48         * sh-opc.h (fmov): Add @<REG_M>+,<DX_REG_N> variant for sh4.
  49         (ftrv): Slay the cut-and-paste monster.
  50
  51 end-sanitize-sh4
  52 Tue Nov 18 23:10:03 1997  J"orn Rennecke  <amylaar@cygnus.co.uk>
  53
  54         * d10v-dis.c (print_operand):
  55         Split OPERAND_FLAG into OPERAND_FFLAG and OPERAND_CFLAG.
  56
  57 Tue Nov 18 18:45:14 1997  J"orn Rennecke  <amylaar@cygnus.co.uk>
  58
  59         * d10v-opc.c (OPERAND_FLAG): Split into:
  60         (OPERAND_FFLAG, OPERAND_CFLAG) .
  61         (FSRC): Split into:
  62         (FFSRC, CFSRC).
  63
  64 Thu Nov 13 11:05:33 1997  Gavin Koch  <gavin@cygnus.com>
  65
  66         * mips-opc.c: Move the INSN_MACRO ISA value to the membership
  67         field for all INSN_MACRO's.
  68         * mips16-opc.c: same
  69
  70 Wed Nov 12 10:16:57 1997  Gavin Koch  <gavin@cygnus.com>
  71
  72         * mips-opc.c (sync,cache): These are 3900 insns.
  73
  74 Tue Nov 11 23:53:41 1997  J"orn Rennecke <amylaar@cygnus.co.uk>
  75
  76         sh-opc.h (sh_table): Remove ftst/nan.
  77
  78 start-sanitize-vr5400
  79 Mon Nov  3 13:23:15 1997  Ken Raeburn  <raeburn@cygnus.com>
  80
  81         * mips-opc.c (dror32, dror, rzu.ob): Fix bugs in encoding.
  82         (c.*.ob, mula.ob, mull.ob, muls.ob, mulsl.ob): Put 'k' version
  83         last.
  84         * mips-dis.c (print_insn_arg): Handle VR5400 operand types.
  85
  86 end-sanitize-vr5400
  87 start-sanitize-tx49
  88 Wed Oct 29 15:10:56 1997  Gavin Koch  <gavin@cygnus.com>
  89
  90         * mips-opc.c (deret,dmult,dmultu,madd,maddu,pref,sdbbp):
  91         Add tx49 insns and configury.
  92
  93 end-sanitize-tx49
  94 Tue Oct 28 17:59:32 1997  Ken Raeburn  <raeburn@cygnus.com>
  95
  96         * mips-opc.c (ffc, ffs): Fix mask.
  97
  98 start-sanitize-d30v
  99 Tue Oct 28 16:34:54 1997  Michael Meissner  <meissner@cygnus.com>
 100
 101         * d30v-opc.c (pre_defined_registers): Add eit_vb, int_s, and int_m
 102         control registers.
 103
 104 end-sanitize-d30v
 105 Mon Oct 27 22:34:03 1997  Ken Raeburn  <raeburn@cygnus.com>
 106
 107         * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
 108 start-sanitize-vr5400
 109         Added VR5400 instructions.
 110         (N5): New cpu-id macro.
 111 end-sanitize-vr5400
 112         (WR_HILO, RD_HILO, MOD_HILO): New macros.
 113
 114 Mon Oct 27 22:34:03 1997  Ken Raeburn  <raeburn@cygnus.com>
 115
 116         * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
 117         (WR_HILO, RD_HILO, MOD_HILO): New macros.
 118
 119 Thu Oct 23 14:57:58 1997  Nick Clifton  <nickc@cygnus.com>
 120
 121         * v850-dis.c (disassemble): Replace // with /* ... */
 122
 123 Wed Oct 22 17:33:21 1997  Richard Henderson  <rth@cygnus.com>
 124
 125         * sparc-opc.c: Add wr & rd for v9a asr's.
 126         * sparc-dis.c (print_insn_sparc): Recognize '_' and '/' for v9a asr's.
 127         (v9a_asr_reg_names): New variable.
 128         Patch from David Miller <davem@vger.rutgers.edu>.
 129
 130 Wed Oct 22 17:18:02 1997  Richard Henderson  <rth@cygnus.com>
 131
 132         * sparc-opc.c (v9notv9a): New insn type.
 133         (IMPDEP): Move to the end to not conflict with edge8 et al.
 134         Patch from David Miller <davem@vger.rutgers.edu>.
 135
 136 Fri Oct 17 13:18:53 1997  Gavin Koch  <gavin@cygnus.com>
 137
 138         * mips-opc.c (bnezl,beqzl): Mark these as also tx39.
 139
 140 Thu Oct 16 11:55:20 1997  Gavin Koch  <gavin@cygnus.com>
 141
 142         * mips-opc.c: Note that 'jalx' is (probably incorrectly) marked I1.
 143
 144 Tue Oct 14 16:10:31 1997  Nick Clifton  <nickc@cygnus.com>
 145
 146         * v850-dis.c (disassemble): Use new symbol_at_address_func() field
 147         of disassemble_info structure to determine if an overlay address
 148         has a matching symbol in low memory.
 149
 150         * dis-buf.c (generic_symbol_at_address): New (dummy) function for
 151         new symbol_at_address_func field in disassemble_info structure.
 152
 153 Fri Oct 10 16:44:52 1997  Nick Clifton  <nickc@cygnus.com>
 154
 155         * v850-opc.c (extract_d22): Use signed arithmatic.
 156
 157 Tue Oct  7 23:40:43 1997  Gavin Koch  <gavin@cygnus.com>
 158
 159         * mips-opc.c: Three op mult is not an ISA insn.
 160
 161 Tue Oct  7 23:37:21 1997  Gavin Koch  <gavin@cygnus.com>
 162
 163         * mips-opc.c: Fix formatting.
 164
 165 Fri Oct  3 17:26:54 1997  Ian Lance Taylor  <ian@cygnus.com>
 166
 167         * i386-dis.c (OP_E): Explicitly sign extend 8 bit values, rather
 168         than assuming that char is signed.  Explicitly sign extend 16 bit
 169         values, rather than assuming that short is 16 bits.
 170         (OP_sI, OP_J, OP_DIR): Likewise.
 171
 172 start-sanitize-v850e
 173 Thu Oct  2 13:36:45 1997  Nick Clifton  <nickc@cygnus.com>
 174
 175         * v850-dis.c (v850_sreg_names): Use symbolic names for higher
 176         system registers.
 177
 178 start-sanitize-v850e
 179 Wed Oct  1 16:58:54 1997  Nick Clifton  <nickc@cygnus.com>
 180
 181         * v850-opc.c: Fix typo in comment.
 182
 183         * v850-dis.c (disassemble): Add test of processor type when
 184         determining opcodes.
 185
 186 Wed Oct  1 14:10:20 1997  Ian Lance Taylor  <ian@cygnus.com>
 187
 188         * configure.in: Use a diversion to set enable_shared before the
 189         arguments are parsed.
 190         * configure: Rebuild.
 191
 192 Thu Sep 25 13:04:59 1997  Ian Lance Taylor  <ian@cygnus.com>
 193
 194         * m68k-opc.c (TBL1): Use ! rather than `.
 195         * m68k-dis.c (print_insn_arg): Remove ` operand specifier.
 196
 197 Wed Sep 24 11:29:35 1997  Ian Lance Taylor  <ian@cygnus.com>
 198
 199         * m68k-opc.c: Correct bchg, bclr, bset, and btst on ColdFire.
 200
 201         * m68k-opc.c: Accept tst{b,w,l} with immediate operands on cpu32.
 202
 203         * m68k-opc.c: Correct movew of an immediate operand to %sr or %ccr
 204         for mcf5200.
 205
 206         * configure.in: Call AC_CHECK_TOOL before AM_PROG_LIBTOOL.
 207         * aclocal.m4: Rebuild with new libtool.
 208         * configure: Rebuild.
 209
 210 start-sanitize-v850e
 211 Fri Sep 19 11:45:49 1997  Andrew Cagney  <cagney@b1.cygnus.com>
 212
 213         * v850-opc.c ("cmov"): Order reg param r1, r2 not r2, r2.
 214
 215 end-sanitize-v850e
 216 Thu Sep 18 11:21:43 1997  Doug Evans  <dje@canuck.cygnus.com>
 217
 218         * sparc-opc.c (sparclet_cpreg_table): Add %ccsr2, %cccrr, %ccrstr.
 219
 220 Tue Sep 16 15:18:20 1997  Nick Clifton  <nickc@cygnus.com>
 221
 222         * v850-opc.c (v850_opcodes): Further rearrangements.
 223
 224 start-sanitize-d30v
 225 Tue Sep 16 16:12:11 1997  Ken Raeburn  <raeburn@cygnus.com>
 226
 227         * d30v-opc.c (rot2h, sra2h, srl2h insns): Revert last change.
 228
 229 end-sanitize-d30v
 230 Tue Sep 16 09:48:50 1997  Nick Clifton  <nickc@cygnus.com>
 231
 232         * v850-opc.c (v850_opcodes): Fields reordered to allow assembler
 233         parser to work.
 234
 235 Tue Sep 16 10:01:00 1997  Gavin Koch  <gavin@cygnus.com>
 236
 237         * mips-opc.c: Added tx39 insns sdbbp, rfe, and deret.
 238 start-sanitize-tx19
 239         * mips16-opc.c: Added mips16 sdbbp.
 240 end-sanitize-tx19
 241
 242 Mon Sep 15 18:31:52 1997  Nick Clifton  <nickc@cygnus.com>
 243
 244         * v850-opc.c: Initialise processors field of v850_opcode structure.
 245
 246 start-sanitize-d30v
 247 Wed Aug 27 21:42:39 1997  Ken Raeburn  <raeburn@cygnus.com>
 248
 249         Merge changes from Martin Hunt:
 250
 251         * d30v-opc.c: Change mvfacc to accept 6-bit unsigned values.
 252
 253         * d30v-opc.c (pre_defined_registers): Add control registers from 0-63.
 254         (d30v_opcode_tabel): Add dbt, rtd, srah, and srlh instructions. Fix
 255         rot2h, sra2h, and srl2h to use new SHORT_A5S format.
 256
 257         * d30v-dis.c (print_insn): Fix disassembly of SHORT_D2 opcodes.
 258
 259         * d30v-dis.c (print_insn): First operand of d*i (delayed
 260         branch) instructions is relative.
 261
 262         * d30v-opc.c (d30v_opcode_table): Change form for repeati.
 263         (d30v_operand_table): Add IMM6S3 type.
 264         (d30v_format_table): Change SHORT_D2. Add LONG_Db.
 265
 266         * d30v-dis.c: Fix bug with ".s" and ".l" extensions
 267         and cmp instructions.
 268
 269         * d30v-opc.c: Correct entries for repeat*, and sat*.
 270         Make IMM5 unsigned. Create IMM6U and IMM12S3U operand
 271         types. Correct several formats.
 272
 273         * d30v-opc.c: (pre_defined_registers): Add dpsw and dpc.
 274
 275         * d30v-opc.c (pre_defined_registers): Change control registers.
 276
 277         * d30v-opc.c (d30v_format_table): Correct SHORT_C1 and
 278         SHORT_C2.  Manual was incorrect.
 279
 280         * d30v-dis.c (lookup_opcode):  Return value now indicates
 281         if an opcode has a short and a long form.  Used for deciding
 282         to append a ".s" or ".l".
 283         (print_insn): Append a ".s" to an instruction if it is
 284         the short form and ".l" if it is a long form. Do not append
 285         anything if the instruction has only one possible size.
 286
 287         * d30v-opc.c: Change mulx2h to require an even register.
 288         New form: SHORT_A2; a SHORT_A form that needs an even
 289         register as the first operand.
 290
 291         * d30v-dis.c (print_insn_d30v): Fix problem where the last
 292         instruction was not being disassembled if there were an odd
 293         number of instructions.
 294
 295         * d30v-opc.c (SHORT_M2, LONG_M2):  Two new forms.
 296
 297 end-sanitize-d30v
 298 start-sanitize-v850e
 299 Fri Sep 12 11:43:54 1997  Nick Clifton  <nickc@cygnus.com>
 300
 301         * v850-dis.c (disassemble): Improved display of register lists.
 302
 303 end-sanitize-v850e
 304 Thu Sep 11 17:35:10 1997  Doug Evans  <dje@canuck.cygnus.com>
 305
 306         * sparc-opc.c (sparc_opcodes): Fix assembler args to
 307         fzeros, fones, fsrc1, fsrc1s, fsrc2s, fnot1, fnot1s, fnot2s,
 308         fors, fnors, fands, fnands, fxors, fxnors, fornot1s, fornot2s,
 309         fandnot1s, fandnot2s.
 310
 311 Tue Sep  9 10:03:49 1997  Doug Evans  <dje@canuck.cygnus.com>
 312
 313         * sparc-opc.c (sparc_opcodes): Fix op3 field for fcmpq/fcmpeq.
 314
 315 Mon Sep  8 14:06:59 1997  Doug Evans  <dje@canuck.cygnus.com>
 316
 317         * cgen-asm.c (cgen_parse_address): New argument resultp.
 318         All callers updated.
 319         * m32r-asm.c (parse_h_hi16): Right shift numbers by 16.
 320
 321 Tue Sep  2 18:39:08 1997  Jeffrey A Law  (law@cygnus.com)
 322
 323         * mn10200-dis.c (disassemble): PC relative instructions are
 324         relative to the next instruction, not the current instruction.
 325
 326 Tue Sep  2 15:41:55 1997  Nick Clifton  <nickc@cygnus.com>
 327
 328         * v850-dis.c (disassemble): Only signed extend values that are not
 329         returned by extract functions.
 330         Remove use of V850_OPERAND_ADJUST_SHORT_MEMORY flag.
 331
 332 Tue Sep  2 15:39:40 1997  Nick Clifton  <nickc@cygnus.com>
 333
 334         * v850-opc.c: Update comments.  Remove use of
 335         V850_OPERAND_ADJUST_SHORT_MEMORY.  Fix several operand patterns.
 336
 337 Tue Aug 26 09:42:28 1997  Nick Clifton  <nickc@cygnus.com>
 338
 339         * v850-opc.c (MOVHI): Immediate parameter is unsigned.
 340
 341 Mon Aug 25 15:58:07 1997  Christopher Provenzano  <proven@cygnus.com>
 342
 343         * configure: Rebuilt with latest devo autoconf for NT support.
 344
 345 Fri Aug 22 10:35:15 1997  Nick Clifton  <nickc@cygnus.com>
 346
 347         * v850-dis.c (disassemble): Use curly brace syntax for register
 348         lists.
 349
 350         * v850-opc.c (v850_opcodes[]): Add NOT_R0 flag to decect cases
 351         where r0 is being used as a destination register.
 352
 353 start-sanitize-v850e
 354 Thu Aug 21 11:09:09 1997  Nick Clifton  <nickc@cygnus.com>
 355
 356         * v850-opc.c (v850_opcodes[]): Move divh opcodes next to each other.
 357 end-sanitize-v850e
 358
 359 start-sanitize-sh4
 360 Wed Aug 20 00:43:11 1997  J"orn Rennecke <amylaar@cygnus.co.uk>
 361
 362         * sh-opc.h (sh_arg_type): Add A_SGR and A_DBR.
 363         (sh_nibble_type, sh_arg_type): Add SH4 floating point extensions.
 364         (sh_table): Likewise.  Add movca.l, ocbi, ocbp, ocbwb.
 365         Add insns to access SGR and DBR.
 366         * sh-dis.c (print_insn_shx): Add SH4 floating point extensions.
 367
 368 end-sanitize-sh4
 369 Tue Aug 19 10:59:59 1997  Richard Henderson  <rth@cygnus.com>
 370
 371         * alpha-opc.c (alpha_opcodes): Fix hw_rei_stall mungage.
 372
 373 start-sanitize-v850e
 374 Mon Aug 18 11:10:03 1997  Nick Clifton  <nickc@cygnus.com>
 375
 376         * v850-opc.c (v850_opcodes[]): Remove use of flag field.
 377         * v850-opc.c (v850_opcodes[]): Add support for reversed short load
 378         opcodes..
 379
 380 Mon Aug 18 11:08:25 1997  Nick Clifton  <nickc@cygnus.com>
 381
 382         * configure (cgen_files): Add support for v850e target.
 383         * configure.in (cgen_files):  Add support for v850e target.
 384
 385 Mon Aug 18 11:08:25 1997  Nick Clifton  <nickc@cygnus.com>
 386
 387         * configure (cgen_files): Add support for v850eq target.
 388         * configure.in (cgen_files):  Add support for v850eq target.
 389 end-sanitize-v850e
 390
 391 Fri Aug 15 05:17:48 1997  Doug Evans  <dje@canuck.cygnus.com>
 392
 393         * configure.in (bfd_arc_arch): Add.
 394         * configure: Rebuild.
 395         * Makefile.am (ALL_MACHINES): Add arc-dis.lo, arc-opc.lo.
 396         * Makefile.in: Rebuild.
 397         * arc-dis.c, arc-opc.c: New files.
 398         * disassemble.c (ARCH_all): Define ARCH_arc.
 399         (disassembler): Add ARC support.
 400
 401 Wed Aug 13 18:52:11 1997  Nick Clifton  <nickc@cygnus.com>
 402
 403 start-sanitize-v850e
 404         * v850-dis.c (disassemble): Add support for v850EQ instructions.
 405
 406         * v850-opc.c (insert_i5div, extract_i5div): New Functions.
 407         (v850_opcodes): Add v850EQ instructions.
 408
 409         * v850-dis.c (disassemble): Add support for v850E instructions.
 410
 411         * v850-opc.c (insert_d5_4, extract_d5_4, insert_d16_16,
 412         extract_d16_16, insert_i9, extract_i9, insert_u9, extract_u9,
 413         insert_spe, extract_spe): New Functions.
 414         (v850_opcodes): Add v850E instructions.
 415 end-sanitize-v850e
 416
 417         * v850-opc.c: Reorganised and re-layed out to improve readability
 418         and portability.
 419
 420 Tue Aug  5 23:09:31 1997  Ian Lance Taylor  <ian@cygnus.com>
 421
 422         * configure: Rebuild with autoconf 2.12.1.
 423
 424 Mon Aug  4 12:02:16 1997  Ian Lance Taylor  <ian@cygnus.com>
 425
 426         * aclocal.m4, configure: Rebuild with new automake patches.
 427
 428 Fri Aug  1 13:02:04 1997  Ian Lance Taylor  <ian@cygnus.com>
 429
 430         * configure.in: Set enable_shared before AM_PROG_LIBTOOL.
 431         * acinclude.m4: Just include acinclude.m4 from BFD.
 432         * aclocal.m4, configure: Rebuild.
 433
 434 Thu Jul 31 21:44:42 1997  Ian Lance Taylor  <ian@cygnus.com>
 435
 436         * Makefile.am: New file, based on old Makefile.in.
 437         * acconfig.h: New file.
 438         * acinclude.m4: New file.
 439         * stamp-h.in: New file.
 440         * configure.in: Call AM_INIT_AUTOMAKE and AM_PROG_LIBTOOL.
 441         Removed shared library handling; now handled by libtool.  Replace
 442         AC_CONFIG_HEADER with AM_CONFIG_HEADER.  Call AM_MAINTAINER_MODE,
 443         AM_CYGWIN32, and AM_EXEEXT.  Replace AC_PROG_INSTALL with
 444         AM_PROG_INSTALL.  Change all .o files to .lo.  Remove stamp-h
 445         handling in AC_OUTPUT.
 446         * dep-in.sed: Change .o to .lo.
 447         * Makefile.in: Now built with automake.
 448         * aclocal.m4: Now built with aclocal.
 449         * config.in, configure: Rebuild.
 450
 451 Mon Jul 28 21:52:24 1997  Jeffrey A Law  (law@cygnus.com)
 452
 453         * mips-opc.c: Fix typo/thinko in "eret" instruction.
 454
 455 start-sanitize-r5900
 456 Mon Jul 28 22:07:14 1997  Andrew Cagney  <cagney@b1.cygnus.com>
 457
 458         * mips-opc.c: Fix coding of mtsa.
 459
 460 end-sanitize-r5900
 461 Thu Jul 24 13:03:26 1997  Doug Evans  <dje@canuck.cygnus.com>
 462
 463         * sparc-opc.c (sparc_opcodes): Fix spelling on fpaddX, fpsubX insns.
 464         Make array const.
 465         * sparc-dis.c (sorted_opcodes): New static local.
 466         (struct opcode_hash): `opcode' is pointer to const element.
 467         (build_hash): First arg is now table of sorted pointers.
 468         (print_insn_sparc): Sort opcodes by sorting table of pointers.
 469         (compare_opcodes): Update.
 470
 471 Tue Jul 15 12:05:23 1997  Doug Evans  <dje@canuck.cygnus.com>
 472
 473         * cgen-opc.c: #include <ctype.h>.
 474         (hash_keyword_name): New arg `case_sensitive_p'.  Callers updated.
 475         Handle case insensitive hashing.
 476         (hash_keyword_value): Change type of `value' to unsigned int.
 477
 478 Thu Jul 10 12:56:10 1997  Jeffrey A Law  (law@cygnus.com)
 479
 480         * mips-opc.c (mips_builtin_opcodes): If an insn uses single
 481         precision FP, mark it as such.  Likewise for double precision
 482         FP.  Mark ISA1 insns.  Consolidate duplicate opcodes where
 483         possible.
 484 start-sanitize-r5900
 485         (mips_builtin_opcodes): Remove non-existant r5900 instructions
 486 end-sanitize-r5900
 487
 488 start-sanitize-r5900
 489 Thu Jun 26 16:20:27 1997  Jeffrey A Law  (law@cygnus.com)
 490
 491         * mips-opc.c (mips_builtin_opcodes): Add "pinteh", "pexeh" and
 492         "pexew" as synonyms for "pintoh", "pexoh", "pexow".
 493
 494 end-sanitize-r5900
 495 Wed Jun 25 15:25:57 1997  Felix Lee  <flee@cirdan.cygnus.com>
 496
 497         * ppc-opc.c (extract_nsi): make unsigned expression signed before
 498         negating it.
 499         (UNUSED): remove one level of parens, so MSVC doesn't choke on
 500         nesting depth when all the macros are expanded.
 501
 502 Tue Jun 17 17:02:17 1997  Ian Lance Taylor  <ian@cygnus.com>
 503
 504         * sparc-opc.c: The fcmp v9a instructions take an integer register
 505         as a destination, not a floating point register.  From Christian
 506         Kuehnke <Christian.Kuehnke@arbi.Informatik.Uni-Oldenburg.DE>.
 507
 508 Mon Jun 16 14:13:18 1997  Ian Lance Taylor  <ian@cygnus.com>
 509
 510         * m68k-dis.c (print_insn_arg): Print case 7.2 using %pc@()
 511         syntax.  From Roman Hodek
 512         <rnhodek@faui22c.informatik.uni-erlangen.de>.
 513
 514         * i386-dis.c (twobyte_has_modrm): Fix pand.
 515
 516 Mon Jun 16 14:08:38 1997  Michael Taylor  <mbt@mit.edu>
 517
 518         * i386-dis.c (dis386_twobyte): Fix pand and pandn.
 519
 520 Tue Jun 10 11:26:47 1997  H.J. Lu  <hjl@gnu.ai.mit.edu>
 521
 522         * arm-dis.c: Add prototypes for arm_decode_shift and
 523         print_insn_arm.
 524
 525 Mon Jun  2 11:39:04 1997  Gavin Koch  <gavin@cygnus.com>
 526
 527         * mips-opc.c: Add r3900 insns.
 528
 529 Tue May 27 15:55:44 1997  Ian Lance Taylor  <ian@cygnus.com>
 530
 531         * sh-dis.c (print_insn_shx): Change relmask to bfd_vma.  Don't
 532         print delay slot instructions on the same line.  When using a PC
 533         relative load, add a comment with the value being loaded if it can
 534         be obtained.
 535
 536 Tue May 27 11:02:08 1997  Alan Modra  <alan@spri.levels.unisa.edu.au>
 537
 538         * i386-dis.c (dis386[], dis386_twobyte[]): change pushl/popl
 539         to pushS/popS for segment regs and byte constant so that
 540         pushw/popw printed when in 16 bit data mode.
 541
 542         * i386-dis.c (dis386[]): change cwtl, cltd to cWtS, cStd to
 543         print cbtw, cwtd in 16 bit data mode.
 544         * i386-dis.c (putop): extra case W to support above.
 545
 546         * i386-dis.c (print_insn_x86): print addr32 prefix when given
 547         address size prefix in 16 bit address mode.
 548
 549 Fri May 23 16:47:23 1997  Ian Lance Taylor  <ian@cygnus.com>
 550
 551         * sh-dis.c: Reindent.  Rename local variable fprintf to
 552         fprintf_fn.
 553
 554 Thu May 22 14:06:02 1997  Doug Evans  <dje@canuck.cygnus.com>
 555
 556         * m32r-opc.c (m32r_cgen_insn_table, cmpui): Undo patch of May 2.
 557
 558 Tue May 20 11:26:27 1997  Gavin Koch  <gavin@cygnus.com>
 559
 560         * mips-opc.c (mips_builtin_opcodes): Moved INSN_ISA field into new
 561           field membership.
 562         * mips16-opc.c (mip16_opcodes): same.
 563
 564 Mon May 12 15:10:53 1997  Jim Wilson  <wilson@cygnus.com>
 565
 566         * m68k-opc.c (moveb): Change $d to %d.
 567
 568 Mon May  5 14:28:41 1997  Ian Lance Taylor  <ian@cygnus.com>
 569
 570         * i386-dis.c: (dis386_twobyte): Add MMX instructions.
 571         (twobyte_has_modrm): Likewise.
 572         (grps): Likewise.
 573         (OP_MMX, OP_EM, OP_MS): New static functions.
 574
 575         * i386-dis.c: Revert patch of April 4.  The output now matches
 576         what gcc generates.
 577
 578 Fri May  2 12:48:37 1997  Doug Evans  <dje@canuck.cygnus.com>
 579
 580         * m32r-opc.c (m32r_cgen_insn_table, cmpui): Use $uimm16 instead
 581         of $simm16.
 582
 583 Thu May  1 15:34:15 1997  Doug Evans  <dje@canuck.cygnus.com>
 584
 585         * m32r-opc.h (CGEN_ARCH): Renamed from CGEN_CPU.
 586
 587 Tue Apr 15 12:40:08 1997  Ian Lance Taylor  <ian@cygnus.com>
 588
 589         * Makefile.in (install): Depend upon installdirs.
 590         (installdirs): New target.
 591
 592 Mon Apr 14 12:13:51 1997  Ian Lance Taylor  <ian@cygnus.com>
 593
 594         From Thomas Graichen <graichen@rzpd.de>:
 595         * configure.in: Use ${CONFIG_SHELL} when running $ac_config_sub.
 596         * configure: Rebuild.
 597
 598 Sun Apr 13 17:50:41 1997  Doug Evans  <dje@canuck.cygnus.com>
 599
 600         * cgen-*.c, m32r-*.c: #include sysdep.h instead of config.h.
 601         Delete string{,s}.h support.
 602
 603 Thu Apr 10 14:44:56 1997  Doug Evans  <dje@canuck.cygnus.com>
 604
 605         * cgen-asm.c (cgen_parse_operand_fn): New global.
 606         (cgen_parse_{{,un}signed_integer,address}): Update call to
 607         cgen_parse_operand_fn.
 608         (cgen_init_parse_operand): New function.
 609         * m32r-asm.c (parse_insn_normal): cgen_init_parse_operand renamed
 610         from cgen_asm_init_parse.
 611         (m32r_cgen_assemble_insn): New operand `errmsg'.
 612         Delete call to as_bad, return error message to caller.
 613         (m32r_cgen_asm_hash_keywords): #if 0 out.
 614
 615 Wed Apr  9 12:05:25 1997  Andreas Schwab  <schwab@issan.informatik.uni-dortmund.de>
 616
 617         * m68k-dis.c (print_insn_arg) [case 'd']: Print as address register,
 618         not data register.
 619         [case 'J']: Fix typo in register name.
 620
 621 Mon Apr  7 16:48:22 1997  Ian Lance Taylor  <ian@cygnus.com>
 622
 623         * configure.in: Substitute SHLIB_LIBS.
 624         * configure: Rebuild.
 625         * Makefile.in (SHLIB_LIBS): New variable.
 626         ($(SHLIB)): Use $(SHLIB_LIBS).
 627
 628 Mon Apr  7 11:45:44 1997  Doug Evans  <dje@canuck.cygnus.com>
 629
 630         * cgen-dis.c (build_dis_hash_table): Fix xmalloc size computation.
 631
 632         * cgen-opc.c (hash_keyword_name): Improve algorithm.
 633
 634         * disassemble.c (disassembler): Handle m32r.
 635
 636 Fri Apr  4 12:29:38 1997  Doug Evans  <dje@canuck.cygnus.com>
 637
 638         * m32r-asm.c, m32r-dis.c, m32r-opc.c, m32r-opc.h: New files.
 639         * cgen-asm.c, cgen-dis.c, cgen-opc.c: New files.
 640         * Makefile.in (CFILES): Add them.
 641         (ALL_MACHINES): Add them.
 642         (dependencies): Regenerate.
 643         * configure.in (cgen_files): New variable.
 644         (bfd_m32r_arch): Add entry.
 645         * configure: Regenerate.
 646
 647 Fri Apr  4 14:04:16 1997  Ian Lance Taylor  <ian@cygnus.com>
 648
 649         * configure.in: Correct file names for bfd_mn10[23]00_arch.
 650         * configure: Rebuild.
 651
 652         * Makefile.in: Rebuild dependencies.
 653
 654         * d10v-dis.c: Include "ansidecl.h" before "opcode/d10v.h".
 655
 656         * i386-dis.c (float_reg): Swap fsubrp and fsubp.  Swap fdivrp and
 657         fdivp.
 658
 659 Thu Apr  3 13:22:45 1997  Ian Lance Taylor  <ian@cygnus.com>
 660
 661         * Branched binutils 2.8.
 662
 663 Wed Apr  2 12:23:53 1997  Ian Lance Taylor  <ian@cygnus.com>
 664
 665         * m10200-dis.c: Rename from mn10200-dis.c.
 666         * m10200-opc.c: Rename from mn10200-opc.c.
 667         * m10300-dis.c: Rename from mn10300-dis.c
 668         * m10300-opc.c: Rename from mn10300-opc.c.
 669         * Makefile.in: Update accordingly.
 670
 671         * mips16-opc.c: Add mul and dmul macros.
 672
 673 Tue Apr  1 16:27:45 1997  Klaus Kaempf  <kkaempf@progis.de>
 674
 675         * makefile.vms: Update CFLAGS, add clean target.
 676
 677 Fri Mar 28 12:10:09 1997  Ian Lance Taylor  <ian@cygnus.com>
 678
 679         * mips-opc.c: Add "wait".  From Ralf Baechle
 680         <ralf@gnu.ai.mit.edu>.
 681
 682         * configure.in: Add stdlib.h to AC_CHECK_HEADERS list.
 683         * configure, config.in: Rebuild.
 684         * sysdep.h: Include <stdlib.h> if it exists.
 685         * sparc-dis.c: Include <stdio.h> and "sysdep.h".  Don't include
 686         <string.h>.
 687         * Makefile.in: Rebuild dependencies.
 688
 689 Thu Mar 27 14:24:43 1997  Ian Lance Taylor  <ian@cygnus.com>
 690
 691         * ppc-opc.c: Add PPC 403 instructions and extended opcodes.  From
 692         Andrew Bray <andy@madhouse.demon.co.uk>.
 693
 694         * mips-opc.c: Add cast when setting mips_opcodes.
 695
 696 Tue Mar 25 23:04:00 1997  Stu Grossman  (grossman@critters.cygnus.com)
 697
 698         * v850-dis.c (disassemble):  Fix sign extension problem.
 699         * v850-opc.c (extract_d*):  Fix sign extension problems to make
 700         disassembly calculate branch offsets correctly.
 701
 702 Mon Mar 24 13:22:13 1997  Ian Lance Taylor  <ian@cygnus.com>
 703
 704         * sh-opc.h: Add bf/s and bt/s as synonyms for bf.s and bt.s.
 705
 706         * mips-opc.c: Add dctr and dctw.
 707
 708 start-sanitize-d30v
 709 Sun Mar 23 18:08:10 1997  Martin M. Hunt  <hunt@pizza.cygnus.com>
 710
 711         * d30v-dis.c (print_insn): Change the way signed constants
 712         are displayed.
 713 end-sanitize-d30v
 714 Fri Mar 21 14:37:52 1997  Ian Lance Taylor  <ian@cygnus.com>
 715
 716         * Makefile.in (BFD_H): New variable.
 717         (HFILES): New variable.
 718         (CFILES): Add all C files.
 719         (.dep, .dep1, dep.sed, dep, dep-in): New targets.
 720         Delete old dependencies, and build new ones.
 721         * dep-in.sed: New file.
 722
 723 Thu Mar 20 19:03:30 1997  Philippe De Muyter  <phdm@info.ucl.ac.be>
 724
 725         * m68k-opc.c (m68k_opcode_aliases): Added blo and blo{s,b,w,l}.
 726
 727 start-sanitize-coldfire
 728 Wed Mar 19 06:53:58 1997  J.T. Conklin  <jtc@rtl.cygnus.com>
 729
 730         * m68k-opc.c (m68k_opcodes): Provide coldfire division module
 731         instructions.
 732
 733 end-sanitize-coldfire
 734 Tue Mar 18 14:17:03 1997  Jeffrey A Law  (law@cygnus.com)
 735
 736         * mn10200-opc.c: Change "trap" to "syscall".
 737         * mn10300-opc.c: Add new "syscall" instruction.
 738
 739 Mon Mar 17 08:48:03 1997  J.T. Conklin  <jtc@beauty.cygnus.com>
 740
 741         * m68k-opc.c (m68k_opcodes): Provide correct entries for mulsl and
 742         mulul insns on the coldfire.
 743
 744 Sat Mar 15 17:13:05 1997  Ian Lance Taylor  <ian@cygnus.com>
 745
 746         * arm-dis.c (print_insn_arm): Don't print instruction bytes.
 747         (print_insn_big_arm): Set bytes_per_chunk and display_endian.
 748         (print_insn_little_arm): Likewise.
 749
 750 Fri Mar 14 15:08:59 1997  Ian Lance Taylor  <ian@cygnus.com>
 751
 752         Based on patches from H.J. Lu <hjl@lucon.org>:
 753         * i386-dis.c (fetch_data): Add prototype.
 754         * m68k-dis.c (fetch_data): Add prototype.
 755         (dummy_print_address): Add prototype.  Make static.
 756         * ppc-opc.c (valid_bo): Add prototype.
 757         * sparc-dis.c (build_hash_table): Add prototype.
 758         (is_delayed_branch, compute_arch_mask): Add prototypes.
 759         (print_insn_sparc): Make several local variables const.
 760         (compare_opcodes): Change arguments to const PTR.  Add prototype.
 761         * sparc-opc.c (arg): Change name field to be const.
 762         (lookup_name, lookup_value): Add prototypes.  Change table and
 763         name parameters to be const.
 764         (sparc_encode_asi): Change name parameter to be const.
 765         (sparc_encode_membar, sparc_encode_prefetch): Likewise.
 766         (sparc_encode_sparclet_cpreg): Likewise.
 767         (sparc_decode_asi): Change return type to be const.
 768         (sparc_decode_membar, sparc_decode_prefetch): Likewise.
 769         (sparc_decode_sparclet_cpreg): Likewise.
 770
 771 Fri Mar  7 10:51:49 1997  Ian Lance Taylor  <ian@cygnus.com>
 772
 773         * Makefile.in ($(SHLINK)): Just use ln -s, not ln -sf, since
 774         Solaris doesn't like the combined options, and the -f is
 775         unnecessary.
 776         (stamp-tshlink, install): Likewise.
 777
 778 Thu Mar  6 16:51:11 1997  Jeffrey A Law  (law@cygnus.com)
 779
 780         * mn10300-opc.c (IMM16_PCREL, SD8N_PCREL, D16_SHIFT): Mark these
 781         as relaxable.
 782
 783 Tue Mar  4 06:10:36 1997  J.T. Conklin  <jtc@cygnus.com>
 784
 785         * m68k-opc.c (m68k_opcodes): Fix last change for the mc68010.
 786
 787 Mon Mar  3 07:45:20 1997  J.T. Conklin  <jtc@cygnus.com>
 788
 789         * m68k-opc.c (m68k_opcodes): Added entries for the tst insns on
 790         the mc68000.
 791
 792 Thu Feb 27 14:04:32 1997  Philippe De Muyter  <phdm@info.ucl.ac.be>
 793
 794         * m68k-opc.c (m68k_opcodes): Added swbegl pseudo-instruction.
 795
 796 start-sanitize-tic80
 797 Thu Feb 27 11:36:41 1997  Michael Meissner  <meissner@cygnus.com>
 798
 799         * tic80-dis.c (print_insn_tic80): Set info->bytes_per_line to 8.
 800
 801 Wed Feb 26 15:34:48 1997  Michael Meissner  <meissner@cygnus.com>
 802
 803         * tic80-opc.c (tic80_predefined_symbols): Define r25 properly.
 804
 805 end-sanitize-tic80
 806 Wed Feb 26 13:38:30 1997  Andreas Schwab  <schwab@issan.informatik.uni-dortmund.de>
 807
 808         * m68k-dis.c (NEXTSINGLE, NEXTDOUBLE, NEXTEXTEND): Use
 809         floatformat_to_double to make portable.
 810         (print_insn_arg): Use NEXTEXTEND macro when extracting extended
 811         precision float.
 812
 813 Mon Feb 24 19:26:12 1997  Dawn Perchik  <dawn@cygnus.com>
 814
 815         * mips-opc.c: Initialize mips_opcodes to mips_builtin_opcodes,
 816         and bfd_mips_num_opcodes to bfd_mips_num_builtin_opcodes.
 817
 818 Mon Feb 24 15:19:01 1997  Martin M. Hunt  <hunt@pizza.cygnus.com>
 819
 820         * d10v-dis.c, d10v-opc.c: Change pre_defined_registers to
 821         d10v_predefined_registers and reg_name_cnt to d10v_reg_name_cnt.
 822
 823 start-sanitize-tic80
 824 Mon Feb 24 14:33:26 1997  Fred Fish  <fnf@cygnus.com>
 825
 826         * tic80-opc.c (LSI_SCALED): Renamed from this ...
 827         (OFF_SL_BR_SCALED): ... to this, and added the flag
 828         TIC80_OPERAND_BASEREL to the flags word.
 829         (tic80_opcodes): Replace all occurances of LSI_SCALED with
 830         OFF_SL_BR_SCALED.
 831
 832 end-sanitize-tic80
 833 Sat Feb 22 21:25:00 1997  Dawn Perchik  <dawn@cygnus.com>
 834
 835         * mips-opc.c: Add macros for cop0, cop1 cop2 and cop3.
 836         Change mips_opcodes from const array to a pointer,
 837         and change bfd_mips_num_opcodes from const int to int,
 838         so that we can increase the size of the mips opcodes table
 839         dynamically.
 840
 841 start-sanitize-tic80
 842 Sat Feb 22 21:03:47 1997  Fred Fish  <fnf@cygnus.com>
 843
 844         * tic80-opc.c (tic80_predefined_symbols): Revert change to
 845         store BITNUM values in the table in one's complement form
 846         to match behavior when assembler is given a raw numeric
 847         value for a BITNUM operand.
 848         * tic80-dis.c (print_operand_bitnum): Ditto.
 849
 850 end-sanitize-tic80
 851 start-sanitize-d30v
 852 Fri Feb 21 16:31:18 1997  Martin M. Hunt  <hunt@pizza.cygnus.com>
 853
 854         * d30v-opc.c: Removed references to FLAG_X.
 855
 856 end-sanitize-d30v
 857 Wed Feb 19 14:51:20 1997  Ian Lance Taylor  <ian@cygnus.com>
 858
 859         * Makefile.in: Add dependencies on ../bfd/bfd.h as required.
 860
 861 start-sanitize-d30v
 862 Tue Feb 18 17:43:43 1997  Martin M. Hunt  <hunt@pizza.cygnus.com>
 863
 864         * Makefile.in: Added d30v object files.
 865         * configure: (bfd_d30v_arch) Rebuilt.
 866         * configure.in: (bfd_d30v_arch) Added new case.
 867         * d30v-dis.c: New file.
 868         * d30v-opc.c: New file.
 869         * disassemble.c (disassembler) Add entry for d30v.
 870
 871 end-sanitize-d30v
 872 start-sanitize-tic80
 873 Tue Feb 18 16:32:08 1997  Fred Fish  <fnf@cygnus.com>
 874
 875         * tic80-opc.c (tic80_predefined_symbols): Add symbolic
 876         representations for the floating point BITNUM values.
 877
 878 Fri Feb 14 12:14:05 1997  Fred Fish  <fnf@cygnus.com>
 879
 880         * tic80-opc.c (tic80_predefined_symbols): Store BITNUM values
 881         in the table in one's complement form, as they appear in the
 882         actual instruction.
 883         (tic80_symbol_to_value): Use macros to access predefined
 884         symbol fields.
 885         (tic80_value_to_symbol): Ditto.
 886         (tic80_next_predefined_symbol): New function.
 887         * tic80-dis.c (print_operand_bitnum): Remove code that did
 888         one's complement for BITNUM values.
 889
 890 end-sanitize-tic80
 891 start-sanitize-r5900
 892 Fri Feb 14 13:56:51 1997  Gavin Koch  <gavin@cygnus.com>
 893
 894         * mips-opc.c: bug fix, can't mark insns INSN_5900 and INSN_ISA4
 895
 896 end-sanitize-r5900
 897 Thu Feb 13 21:56:51 1997  Klaus Kaempf  <kkaempf@progis.de>
 898
 899         * makefile.vms: Remove 8 bit characters.  Update to latest
 900         gcc release.
 901
 902 Thu Feb 13 20:41:22 1997  Philippe De Muyter  <phdm@info.ucl.ac.be>
 903
 904         * m68k-opc.c (m68k_opcodes): Add swbeg pseudo-instruction.
 905
 906 Thu Feb 13 16:30:02 1997  Jeffrey A Law  (law@cygnus.com)
 907
 908         * mn10200-opc.c (IMM16_PCREL): This is a signed operand.
 909         (IMM24_PCREL): Likewise.
 910
 911 Thu Feb 13 13:28:43 1997  Ian Lance Taylor  <ian@cygnus.com>
 912
 913         * mips-dis.c (print_mips16_insn_arg): Use memaddr - 2 as the base
 914         address for an extended PC relative instruction that is not a
 915         branch.
 916
 917 Wed Feb 12 12:27:40 1997  Andreas Schwab  <schwab@issan.informatik.uni-dortmund.de>
 918
 919         * m68k-dis.c (print_insn_m68k): Set bytes_per_chunk and
 920         bytes_per_line.
 921
 922 start-sanitize-tic80
 923 Tue Feb 11 16:36:31 1997  Fred Fish  <fnf@cygnus.com>
 924
 925         * tic80-opc.c (tic80_operands): Fix typo '+' -> '|'.
 926         (tic80_opcodes): Sort entries so that long immediate forms
 927         come after short immediate forms, making it easier for
 928         assembler to select the right one for a given operand.
 929
 930 end-sanitize-tic80
 931 Tue Feb 11 15:26:47 1997  Ian Lance Taylor  <ian@cygnus.com>
 932
 933         * mips-dis.c (_print_insn_mips): Set bytes_per_chunk and
 934         display_endian.
 935         (print_insn_mips16): Likewise.
 936
 937 start-sanitize-r5900
 938 Fri Feb  7 11:12:44 1997  Gavin Koch  <gavin@cygnus.com>
 939
 940         * mips-opc.c: add r5900.
 941
 942 end-sanitize-r5900
 943 start-sanitize-tic80
 944 Mon Feb 10 10:12:41 1997  Fred Fish  <fnf@cygnus.com>
 945
 946         * tic80-opc.c (tic80_symbol_to_value): Changed to accept
 947         a symbol class that restricts translation to just that
 948         class (general register, condition code, etc).
 949
 950 Thu Feb  6 17:34:09 1997  Fred Fish  <fnf@cygnus.com>
 951
 952         * tic80-opc.c (tic80_operands): Add REG_0_E, REG_22_E,
 953         and REG_DEST_E for register operands that have to be
 954         an even numbered register.  Add REG_FPA for operands that
 955         are one of the floating point accumulator registers.
 956         Add TIC80_OPERAND_MASK to flags for ENDMASK operand.
 957         (tic80_opcodes): Change entries that need even numbered
 958         register operands to use the new operand table entries.
 959         Add "or" entries that are identical to "or.tt" entries.
 960
 961 end-sanitize-tic80
 962 Wed Feb  5 11:12:44 1997  Ian Lance Taylor  <ian@cygnus.com>
 963
 964         * mips16-opc.c: Add new cases of exit instruction for
 965         disassembler.
 966         * mips-dis.c (print_mips16_insn_arg): Display floating point
 967         registers in operands of exit instruction.  Print `$' before
 968         register names in operands of entry and exit instructions.
 969
 970 start-sanitize-tic80
 971 Thu Jan 30 14:09:03 1997  Fred Fish  <fnf@cygnus.com>
 972
 973         * tic80-opc.c (tic80_predefined_symbols): Table of name/value
 974         pairs for all predefined symbols recognized by the assembler.
 975         Also used by the disassembling routines.
 976         (tic80_symbol_to_value): New function.
 977         (tic80_value_to_symbol): New function.
 978         * tic80-dis.c (print_operand_control_register,
 979         print_operand_condition_code, print_operand_bitnum):
 980         Remove private tables and use tic80_value_to_symbol function.
 981
 982 end-sanitize-tic80
 983 Thu Jan 30 11:30:45 1997  Martin M. Hunt  <hunt@pizza.cygnus.com>
 984
 985         * d10v-dis.c (print_operand): Change address printing
 986         to correctly handle PC wrapping.  Fixes PR11490.
 987
 988 Wed Jan 29 09:39:17 1997  Jeffrey A Law  (law@cygnus.com)
 989
 990         * mn10200-opc.c (mn10200_operands): Make 8 and 16 bit pc-relative
 991         branches relaxable.
 992
 993 Tue Jan 28 15:57:34 1997  Ian Lance Taylor  <ian@cygnus.com>
 994
 995         * mips-dis.c (print_insn_mips16): Set insn_info information.
 996         (print_mips16_insn_arg): Likewise.
 997
 998         * mips-dis.c (print_insn_mips16): Better handling of an extend
 999         opcode followed by an instruction which can not be extended.
1000
1001 Fri Jan 24 12:08:21 1997  J.T. Conklin  <jtc@cygnus.com>
1002
1003         * m68k-opc.c (m68k_opcodes): Changed operand specifier for the
1004         coldfire moveb instruction to not allow an address register as
1005         destination.  Although the documentation does not indicate that
1006         this is invalid, experiments uncovered unexpected behavior.
1007         Added a comment explaining the situation.  Thanks to Andreas
1008         Schwab for pointing this out to me.
1009
1010 start-sanitize-tic80
1011 Wed Jan 22 20:13:51 1997  Fred Fish  <fnf@cygnus.com>
1012
1013         * tic80-opc.c (tic80_opcodes): Expand comment to note that the
1014         entries are presorted so that entries with the same mnemonic are
1015         adjacent to each other in the table.  Sort the entries for each
1016         instruction so that this is true.
1017
1018 end-sanitize-tic80
1019 Mon Jan 20 12:48:57 1997  Andreas Schwab  <schwab@issan.informatik.uni-dortmund.de>
1020
1021         * m68k-dis.c: Include <libiberty.h>.
1022         (print_insn_m68k): Sort the opcode table on the most significant
1023         nibble of the opcode.
1024
1025 start-sanitize-tic80
1026 Sat Jan 18 15:15:05 1997  Fred Fish  <fnf@cygnus.com>
1027
1028         * tic80-dis.c (tic80_opcodes): Add "wrcr", "vmpy", "vrnd",
1029         "vsub", "vst", "xnor", and "xor" instructions.
1030         (V_a1): Renamed from V_a, msb of accumulator reg number.
1031         (V_a0): Add macro, lsb of accumulator reg number.
1032
1033 Fri Jan 17 18:24:31 1997  Fred Fish  <fnf@cygnus.com>
1034
1035         * tic80-dis.c (print_insn_tic80): Broke excessively long
1036         function up into several smaller ones and arranged for
1037         the instruction printing function to be callable recursively
1038         to print vector instructions that have both a load and a
1039         math instruction packed into a single opcode.
1040         * tic80-opc.c (tic80_opcodes): Expand comment for vld opcode
1041         to explain why it comes after the other vector opcodes.
1042
1043 end-sanitize-tic80
1044 Fri Jan 17 16:19:15 1997  J.T. Conklin  <jtc@beauty.cygnus.com>
1045
1046         * m68k-opc.c (m68k_opcodes): add b, w, or l specifier to coldfire
1047         move insns to handle immediate operands.
1048
1049 Thu Jan 17 16:19:00 1997  Andreas Schwab  <schwab@issan.informatik.uni-dortmund.de>
1050
1051         * m68k-opc.c (m68k_opcodes): Delete duplicate entry for "cmpil".
1052         fix operand mask in the "moveml" entries for the coldfire.
1053
1054 start-sanitize-tic80
1055 Thu Jan 16 20:54:40 1997  Fred Fish  <fnf@cygnus.com>
1056
1057         * tic80-opc.c (V_a, V_m, V_S, V_Z, V_p, OP_V, MASK_V):
1058         New macros for building vector instruction opcodes.
1059         (tic80_opcodes): Remove all uses of FMT_SI, FMT_REG, and
1060         FMT_LI, which were unused.  The field is now a flags field.
1061         Remove some opcodes that are possible, but illegal, such
1062         as long immediate instructions with doubles for immediate
1063         values.  Add "vadd" and "vld" instructions.
1064
1065 Wed Jan 15 18:59:51 1997  Fred Fish  <fnf@cygnus.com>
1066
1067         * tic80-opc.c (tic80_operands): Reorder some table entries to make
1068         the order more logical.  Move the shift alias instructions ("rotl",
1069         "shl", "ins", "rotr", "extu", "exts", "srl", and "sra" to be
1070         interspersed with the regular sr.x and sl.x instructions.  Add
1071         and test new instruction opcodes for "sl", "sli", "sr", "sri", "st",
1072         "sub", "subu", "swcr", and "trap".
1073
1074 Tue Jan 14 19:42:50 1997  Fred Fish  <fnf@cygnus.com>
1075
1076         * tic80-opc.c (OFF_SS_PC): Renamed from OFF_SS.
1077         (OFF_SL_PC): Renamed from OFF_SL.
1078         (OFF_SS_BR): New operand type for base relative operand.
1079         (OFF_SL_BR): New operand type for base relative operand.
1080         (REG_BASE): New operand type for base register operand.
1081         (tic80_opcodes): Add and test "fmpy", "frndm", "frndn", "frndp",
1082         "frndz", "fsqrt", "fsub", "illop0", "illopF", "ins", "jsr",
1083         "ld", "ld.u", "lmo", "or", "rdcr", "rmo", "rotl", and "rotr"
1084         instructions.
1085         * tic80-dis.c (print_insn_tic80): Print opcode name with fixed width
1086         10 char field, padded with spaces on rhs, rather than a string
1087         followed by a tab.  Use renamed TIC80_OPERAND_PCREL flag bit rather
1088         than old TIC80_OPERAND_RELATIVE.  Add support for new
1089         TIC80_OPERAND_BASEREL flag bit.
1090
1091 Mon Jan 13 15:58:56 1997  Fred Fish  <fnf@cygnus.com>
1092
1093         * tic80-dis.c (print_insn_tic80): Print floating point operands
1094         as floats.
1095         * tic80-opc.c (SPFI): Add single precision floating point
1096         immediate operand type.
1097         (ROTATE): Add rotate operand type for shifts.
1098         (ENDMASK): Add for shifts.
1099         (n): Macro for the 'n' bit.
1100         (i): Macro for the 'i' bit.
1101         (PD): Macro for the 'PD' field.
1102         (P2): Macro for the 'P2' field.
1103         (P1): Macro for the 'P1' field.
1104         (tic80_opcodes): Add entries for "exts", "extu", "fadd",
1105         "fcmp", and "fdiv".
1106
1107 end-sanitize-tic80
1108 Mon Jan  6 15:06:55 1997  Jeffrey A Law  (law@cygnus.com)
1109
1110         * mn10200-dis.c (disassemble): Mask off unwanted bits after
1111         adding in current address for pc-relative operands.
1112
1113 start-sanitize-tic80
1114 Mon Jan  6 10:56:25 1997  Fred Fish  <fnf@cygnus.com>
1115
1116         * tic80-dis.c (R_SCALED): Add macro to test for ":s" modifier bit.
1117         (print_insn_tic80): If R_SCALED then print ":s" modifier for operand.
1118         * tic80-opc.c (REG0, REG22, REG27, SSOFF, LSOFF): Names
1119         changed to REG_0, REG_22, REG_DEST, OFF_SS, OFF_SL respectively.
1120         (SICR, LICR, REGM_SI, REGM_LI): Names changed to CR_SI, CR_LI,
1121         REG_BASE_M_SI, REG_BASE_M_LI respectively.
1122         (REG_SCALED, LSI_SCALED): New operand types.
1123         (E): New macro for 'E' bit at bit 27.
1124         (tic80_opcodes): Add and test dld, dld.u, dst, estop, and etrap
1125         opcodes, including the various size flavors (b,h,w,d) for
1126         the direct load and store instructions.
1127
1128 Sun Jan  5 12:18:14 1997  Fred Fish  <fnf@cygnus.com>
1129
1130         * tic80-dis.c (M_SI, M_LI): Add macros to test for ":m" modifier bit
1131         in an instruction.
1132         * tic80-dis.c (print_insn_tic80): Change comma and paren handling.
1133         Use M_SI and M_LI macros to check for ":m" modifier for GPR operands.
1134         * tic80-opc.c (tic80_operands): Add REGM_SI and REGM_LI operands.
1135         (F, M_REG, M_LI, M_SI, SZ_REG, SZ_LI, SZ_SI, D, S): New bit-twiddlers.
1136         (MASK_LI_M, MASK_SI_M, MASK_REG_M): Remove and replace in opcode
1137         masks with "MASK_* & ~M_*" to get the M bit reset.
1138         (tic80_opcodes): Add bsr, bsr.a, cmnd, cmp, dcachec, and dcachef.
1139
1140 Sat Jan  4 19:05:05 1997  Fred Fish  <fnf@cygnus.com>
1141
1142         * tic80-dis.c (print_insn_tic80): Print TIC80_OPERAND_RELATIVE
1143         correctly.  Add support for printing TIC80_OPERAND_BITNUM and
1144         TIC80_OPERAND_CC, and TIC80_OPERAND_CR operands in symbolic
1145         form.
1146         * tic80-opc.c (tic80_operands): Add SSOFF, LSOFF, BITNUM,
1147         CC, SICR, and LICR table entries.
1148         (tic80_opcodes): Add and test "nop", "br", "bbo", "bbz",
1149         "bcnd", and "brcr" opcodes.
1150
1151 end-sanitize-tic80
1152 Fri Jan  3 18:32:11 1997  Fred Fish  <fnf@cygnus.com>
1153
1154         * ppc-opc.c (powerpc_operands): Make comment match the
1155         actual fields (no shift field).
1156         * sparc-opc.c (sparc_opcodes): Document why this cannot be "const".
1157 start-sanitize-tic80
1158         * tic80-dis.c (print_insn_tic80): Replace abort stub with a
1159         partial implementation, work in progress.
1160         * tic80-opc.c (tic80_operands): Begin construction operands table.
1161         (tic80_opcodes): Continue populating opcodes table and start
1162         filling in the operand indices.
1163         (tic80_num_opcodes): Add this.
1164 end-sanitize-tic80
1165
1166 Fri Jan  3 12:13:52 1997  Ian Lance Taylor  <ian@cygnus.com>
1167
1168         * m68k-opc.c: Add #B case for moveq.
1169
1170 Thu Jan  2 12:14:29 1997  Jeffrey A Law  (law@cygnus.com)
1171
1172         * mn10300-dis.c (disassemble): Make sure all variables are initialized
1173         before they are used.
1174
1175 Tue Dec 31 12:20:38 1996  Jeffrey A Law  (law@cygnus.com)
1176
1177         * v850-opc.c (v850_opcodes): Put curly-braces around operands
1178         for "breakpoint" instruction.
1179
1180 Tue Dec 31 15:38:13 1996  Ian Lance Taylor  <ian@cygnus.com>
1181
1182         * Makefile.in (ALL_CFLAGS): Add -D_GNU_SOURCE.
1183         (dep): Use ALL_CFLAGS rather than CFLAGS.
1184
1185 Tue Dec 31 15:09:16 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
1186
1187         * v850-opc.c (D8_{6,7}): Set V850_OPERAND_ADJUST_SHORT_MEMORY
1188         flag.
1189
1190 Mon Dec 30 17:02:11 1996  Fred Fish  <fnf@cygnus.com>
1191
1192         * Makefile.in (m68k-opc.o, alpha-opc.o): Remove dis-asm.h dependency.
1193 start-sanitize-tic80
1194         (tic80-dis.o, tic80-opc.o): Add rules per comment in Makefile.in.
1195 end-sanitize-tic80
1196
1197 Mon Dec 30 11:38:01 1996  Ian Lance Taylor  <ian@cygnus.com>
1198
1199         * mips16-opc.c: Add "abs".
1200
1201 start-sanitize-tic80
1202 Sun Dec 29 10:58:22 1996  Fred Fish  <fnf@cygnus.com>
1203
1204         * Makefile.in (ALL_MACHINES): Add tic80-dis.o and tic80-opc.o.
1205         * disassemble.c (ARCH_tic80): Define if ARCH_all is defined.
1206         (disassembler): Add bfd_arch_tic80 support to set disassemble
1207         to print_insn_tic80.
1208         * tic80-dis.c (print_insn_tic80): Add stub.
1209
1210 Fri Dec 27 22:30:57 1996  Fred Fish  <fnf@cygnus.com>
1211
1212         * configure.in (arch in $selarchs): Add bfd_tic80_arch entry.
1213         * configure: Regenerate with autoconf.
1214         * tic80-dis.c: Add file.
1215         * tic80-opc.c: Add file.
1216
1217 end-sanitize-tic80
1218 Fri Dec 20 14:30:19 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
1219
1220         * d10v-opc.c (pre_defined_registers):  Add cr[0-15], dpc, dpsw, link.
1221
1222 Mon Dec 16 13:00:15 1996  Jeffrey A Law  (law@cygnus.com)
1223
1224         * mn10200-opc.c (mn10200_operands): Add SIMM16N.
1225         (mn10200_opcodes): Use it for some logicals and btst insns.
1226         Add "break" and "trap" instructions.
1227
1228         * mn10300-opc.c (mn10300_opcodes): Add "break" instruction.
1229
1230         * mn10200-opc.c: Add pseudo-ops for "mov (an),am" and "mov an,(am)".
1231
1232 Sat Dec 14 22:36:20 1996  Ian Lance Taylor  <ian@cygnus.com>
1233
1234         * mips-dis.c (print_mips16_insn_arg): The base address of a PC
1235         relative load or add now depends upon whether the instruction is
1236         in a delay slot.
1237
1238 Wed Dec 11 09:23:46 1996  Jeffrey A Law  (law@cygnus.com)
1239
1240         * mn10200-dis.c: Finish writing disassembler.
1241         * mn10200-opc.c (mn10200_opcodes): Fix mask for "mov imm8,dn".
1242         Fix mask for "jmp (an)".
1243
1244         * mn10300-dis.c (disassemble, print_insn_mn10300): Corrently
1245         handle endianness issues for mn10300.
1246
1247         * mn10200-opc.c (mn10200_opcodes): Fix operands for "movb dm,(an)".
1248
1249 Tue Dec 10 12:08:05 1996  Jeffrey A Law  (law@cygnus.com)
1250
1251         * mn10200-opc.c (mn10200_opcodes): "mov imm8,d0" is a format 2
1252         instruction.  Fix opcode field for "movb (imm24),dn".
1253
1254         * mn10200-opc.c (mn10200_operands): Fix insertion position
1255         for DI operand.
1256
1257 Mon Dec  9 16:42:43 1996  Jeffrey A Law  (law@cygnus.com)
1258
1259         * mn10200-opc.c: Create mn10200 opcode table.
1260         * mn10200-dis.c: Flesh out mn10200 disassembler.  Not ready,
1261         but moving along nicely.
1262
1263 Sun Dec  8 04:28:31 1996  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
1264
1265         * Makefile.in (ALL_MACHINES):  Add mips16-opc.o.
1266
1267 Fri Dec  6 16:47:40 1996  J.T. Conklin  <jtc@rhino.cygnus.com>
1268
1269         * m68k-opc.c (m68k_opcodes): Revert change to use < and >
1270         specifiers for fmovem* instructions.
1271
1272 Fri Dec  6 14:48:09 1996  Jeffrey A Law  (law@cygnus.com)
1273
1274         * mn10300-dis.c (disassemble): Remove '$' register prefixing.
1275
1276 Fri Dec  6 17:34:39 1996  Ian Lance Taylor  <ian@cygnus.com>
1277
1278         * mips16-opc.c: Change opcode for entry/exit to avoid conflicting
1279         with dsrl.
1280
1281 Fri Dec  6 14:48:09 1996  Jeffrey A Law  (law@cygnus.com)
1282
1283         * mn10300-opc.c: Add some comments explaining the various
1284         operands and such.
1285
1286         * mn10300-dis.c (disassemble): Fix minor gcc -Wall warnings.
1287
1288 Thu Dec  5 12:09:48 1996  J.T. Conklin  <jtc@rtl.cygnus.com>
1289
1290         * m68k-dis.c (print_insn_arg): Handle new < and > operand
1291         specifiers.
1292
1293         * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
1294         operand specifiers in fmovm* instructions.
1295
1296 Wed Dec  4 14:52:18 1996  Ian Lance Taylor  <ian@cygnus.com>
1297
1298         * ppc-opc.c (insert_li): Give an error if the offset has the two
1299         least significant bits set.
1300
1301 Wed Nov 27 13:09:01 1996  Ian Lance Taylor  <ian@cygnus.com>
1302
1303         * mips-dis.c (print_insn_mips16): Separate the instruction from
1304         the arguments with a tab, not a space.
1305
1306 Tue Nov 26 13:24:17 1996  Jeffrey A Law  (law@cygnus.com)
1307
1308         * mn10300-dis.c (disasemble): Finish conversion to '$' as
1309         register prefix.
1310
1311         * mn10300-opc.c (mn10300_opcodes): Fix mask field for
1312         mov am,(imm32,sp).
1313
1314 Tue Nov 26 10:53:21 1996  Ian Lance Taylor  <ian@cygnus.com>
1315
1316         * configure: Rebuild with autoconf 2.12.
1317
1318         Add support for mips16 (16 bit MIPS implementation):
1319         * mips16-opc.c: New file.
1320         * mips-dis.c: Include "elf-bfd.h" and "elf/mips.h".
1321         (mips16_reg_names): New static array.
1322         (print_insn_big_mips): Use print_insn_mips16 in 16 bit mode or
1323         after seeing a 16 bit symbol.
1324         (print_insn_little_mips): Likewise.
1325         (print_insn_mips16): New static function.
1326         (print_mips16_insn_arg): New static function.
1327         * mips-opc.c: Add jalx instruction.
1328         * Makefile.in (mips16-opc.o): New target.
1329         * configure.in: Use mips16-opc.o for bfd_mips_arch.
1330         * configure: Rebuild.
1331
1332 Mon Nov 25 16:15:17 1996  J.T. Conklin  <jtc@cygnus.com>
1333
1334         * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
1335         operand specifiers in *save, *restore and movem* instructions.
1336
1337         * m68k-opc.c (m68k_opcodes): Fix move and movem instructions for
1338         the coldfire.
1339
1340         * m68k-opc.c (m68k_opcodes): The coldfire (mcf5200) can only use
1341         register operands for immediate arithmetic, not, neg, negx, and
1342         set according to condition instructions.
1343
1344         * m68k-opc.c (m68k_opcodes): Consistantly Use "s" as the storage
1345         specifier of the effective-address operand in immediate forms of
1346         arithmetic instructions.  The specifier for the immediate operand
1347         notes how and where the constant will be stored.
1348
1349 Mon Nov 25 11:17:01 1996  Jeffrey A Law  (law@cygnus.com)
1350
1351         * mn10300-opc.c (mn10300_opcodes): Remove redundant "lcc"
1352         opcode.
1353
1354         * mn10300-dis.c (disassemble): Use '$' instead of '%' for
1355         register prefix.
1356
1357         * mn10300-dis.c (disassemble): Prefix registers with '%'.
1358
1359 Wed Nov 20 10:37:13 1996  Jeffrey A Law  (law@cygnus.com)
1360
1361         * mn10300-dis.c (disassemble): Handle register lists.
1362
1363         * mn10300-opc.c: Fix handling of register list operand for
1364         "call", "ret", and "rets" instructions.
1365
1366         * mn10300-dis.c (disassemble): Print PC-relative and memory
1367         addresses symbolically if possible.
1368         * mn10300-opc.c: Distinguish between absolute memory addresses,
1369         pc-relative offsets & random immediates.
1370
1371         * mn10300-dis.c (print_insn_mn10300): Fix fetch of last byte
1372         in 7 byte insns.
1373         (disassemble): Handle SPLIT and EXTENDED operands.
1374
1375 Tue Nov 19 13:33:01 1996  Jeffrey A Law  (law@cygnus.com)
1376
1377         * mn10300-dis.c: Rough cut at printing some operands.
1378
1379         * mn10300-dis.c: Start working on disassembler support.
1380         * mn10300-opc.c (mn10300_opcodes): Fix masks on several insns.
1381
1382         * mn10300-opc.c (mn10300_operands): Add "REGS" for a register
1383         list.
1384         (mn10300_opcodes): Use REGS for register list in "movm" instructions.
1385
1386 Mon Nov 18 15:20:35 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
1387
1388         * d10v-opc.c (d10v_opcodes): Add3 sets the carry.
1389
1390 Fri Nov 15 13:43:19 1996  Jeffrey A Law  (law@cygnus.com)
1391
1392         * mn10300-opc.c (mn10300_opcodes): Demand parens around
1393         register argument is calls and jmp instructions.
1394
1395 Thu Nov  7 00:26:05 1996  Jeffrey A Law  (law@cygnus.com)
1396
1397         * mn10300-opc.c (mn10300_opcodes): Use DN01 for putx and
1398         getx operand.  Fix opcode for mulqu imm,dn.
1399
1400 Wed Nov  6 13:42:32 1996  Jeffrey A Law  (law@cygnus.com)
1401
1402         * mn10300-opc.c (mn10300_operands): Hijack "bits" field
1403         in MN10300_OPERAND_SPLIT operands for how many bits
1404         appear in the basic insn word.  Add IMM32_HIGH24,
1405         IMM32_HIGH24_LOWSHIFT8, IMM8E_SHIFT8.
1406         (mn10300_opcodes): Use new operands as needed.
1407
1408         * mn10300-opc.c (mn10300_operands): Add IMM32_LOWSHIFT8
1409         for bset, bclr, btst instructions.
1410         (mn10300_opcodes): Use new IMM32_LOWSHIFT8 as needed.
1411
1412         * mn10300-opc.c (mn10300_operands): Remove many redundant
1413         operands.  Update opcode table as appropriate.
1414         (IMM32): Add MN10300_OPERAND_SPLIT flag.
1415         (mn10300_opcodes): Fix single bit error in mov imm32,dn insn.
1416
1417 Tue Nov  5 13:26:58 1996  Jeffrey A Law  (law@cygnus.com)
1418
1419         * mn10300-opc.c (mn10300_operands): Add DN2, DM2, AN2, AM2
1420         operands (for indexed load/stores).  Fix bitpos for DI
1421         operand.  Add SN8N_SHIFT8, IMM8_SHIFT8, and D16_SHIFT for the
1422         few instructions that insert immediates/displacements in the
1423         middle of the instruction.  Add IMM8E for 8 bit immediate in
1424         the extended part of an instruction.
1425         (mn10300_operands): Use new opcodes as appropriate.
1426
1427 Tue Nov  5 10:30:51 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
1428
1429         * d10v-opc.c (d10v_opcodes): Declare the trap instruction
1430         sequential so the assembler never parallelizes it with
1431         other instructions.
1432
1433 Mon Nov  4 12:50:40 1996  Jeffrey A Law  (law@cygnus.com)
1434
1435         * mn10300-opc.c (mn10300_operands): Add DN01 and AN01 for
1436         a data/address register that appears in register field 0
1437         and register field 1.
1438         (mn10300_opcodes): Use DN01 and AN01 for mov/cmp imm8,DN/AN
1439
1440 Fri Nov  1 10:29:11 1996  Richard Henderson  <rth@tamu.edu>
1441
1442         * alpha-dis.c (print_insn_alpha): Use new NOPAL mask for
1443         standard disassembly.
1444
1445         * alpha-opc.c (alpha_operands): Rearrange flags slot.
1446         (alpha_opcodes): Add new BWX, CIX, and MAX instructions.
1447         Recategorize PALcode instructions.
1448
1449 Wed Oct 30 16:46:58 1996  Jeffrey A Law  (law@cygnus.com)
1450
1451         * v850-opc.c (v850_opcodes): Add relaxing "jbr".
1452
1453 Tue Oct 29 16:30:28 1996  Ian Lance Taylor  <ian@cygnus.com>
1454
1455         * mips-dis.c (_print_insn_mips): Don't print a trailing tab if
1456         there are no operand types.
1457
1458 Tue Oct 29 12:22:21 1996  Jeffrey A Law  (law@cygnus.com)
1459
1460         * v850-opc.c (D9_RELAX): Renamed from D9, all references
1461         changed.
1462         (v850_operands): Make sure D22 immediately follows D9_RELAX.
1463
1464 Fri Oct 25 12:12:53 1996  Ian Lance Taylor  <ian@cygnus.com>
1465
1466         * i386-dis.c (print_insn_x86): Set info->bytes_per_line to 5.
1467
1468 Thu Oct 24 17:53:52 1996  Jeffrey A Law  (law@cygnus.com)
1469
1470         * v850-opc.c (insert_d8_6): Fix operand insertion for sld.w
1471         and sst.w instructions.
1472
1473         * v850-opc.c (v850_opcodes): Add "jCC" instructions (aliases for
1474         "bCC"instructions).
1475
1476 Thu Oct 24 17:21:20 1996  Ian Lance Taylor  <ian@cygnus.com>
1477
1478         * mips-dis.c (_print_insn_mips): Use a tab between the instruction
1479         and the arguments.
1480
1481 Tue Oct 22 23:32:56 1996  Ian Lance Taylor  <ian@cygnus.com>
1482
1483         * ppc-opc.c (PPCPWR2): Define.
1484         (powerpc_opcodes): Use PPCPWR2 for fsqrt, rather than duplicating
1485         it.
1486
1487 Fri Oct 11 16:03:49 1996  Jeffrey A Law  (law@cygnus.com)
1488
1489         * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode
1490         field for movhu instruction.
1491
1492         * v850-dis.c (disassemble): For V850_OPERAND_SIGNED operands,
1493         cast value to "long" not "signed long" to keep hpux10
1494         compiler quiet.
1495
1496 Thu Oct 10 10:25:58 1996  Jeffrey A Law  (law@cygnus.com)
1497
1498         * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode field
1499         for mov (abs16),DN.
1500
1501         * mn10300-opc.c (FMT*): Remove definitions.
1502
1503         * mn10300-opc.c (mn10300_opcodes): Fix destination register
1504         for shift-by-register opcodes.
1505
1506         * mn10300-opc.c (mn10300_operands): Break DN, DM, AN, AM
1507         into [AD][MN][01] for encoding the position of the register
1508         in the opcode.
1509
1510 Wed Oct  9 11:19:26 1996  Jeffrey A Law  (law@cygnus.com)
1511
1512         * mn10300-opc.c (mn10300_opcodes): Add "extended" instructions,
1513         "putx", "getx", "mulq", "mulqu", "sat16", "sat24", "bsch".
1514
1515 Tue Oct  8 11:55:35 1996  Jeffrey A Law  (law@cygnus.com)
1516
1517         * mn10300-opc.c (mn10300_operands): Remove "REGS" operand.
1518         Fix various typos.  Add "PAREN" operand.
1519         (MEM, MEM2): Define.
1520         (mn10300_opcodes): Surround all memory addresses with "PAREN"
1521         operands.  Fix several typos.
1522
1523         * mn10300-opc.c (mn10300_opcodes): Fix typos in yesterday's
1524         changes.
1525
1526 Mon Oct  7 16:48:45 1996  Jeffrey A Law  (law@cygnus.com)
1527
1528         * mn10300-opc.c (FMT_XX): Renumber starting at one.
1529         (mn10300_operands): Rough cut.  Enough to parse "mov" instructions
1530         at this time.
1531         (mn10300_opcodes): Break opcode format out into its own field.
1532         Update many operand fields to deal with signed vs unsigned
1533         issues.  Fix one or two typos in the "mov" instruction
1534         opcode, mask and/or operand fields.
1535
1536 Mon Oct  7 11:39:49 1996  Andreas Schwab  <schwab@issan.informatik.uni-dortmund.de>
1537
1538         * m68k-opc.c (plusha): Prefer encoding for m68040up, in case
1539         m68851 wasn't reset.
1540
1541 Thu Oct  3 17:17:02 1996  Ian Lance Taylor  <ian@cygnus.com>
1542
1543         * mn10300-opc.c (mn10300_opcodes): Add opcode & masks for
1544         all opcodes.  Very rough cut at operands for all opcodes.
1545
1546         * mn10300-opc.c (mn10300_opcodes): Start fleshing out the
1547         opcode table.
1548
1549 Thu Oct  3 10:06:07 1996  Jeffrey A Law  (law@cygnus.com)
1550
1551         * mn10200-opc.c, mn10300-opc.c: New files.
1552         * mn10200-dis.c, mn10300-dis.c: New files.
1553         * mn10x00-opc.c, mn10x00-dis.c: Deleted.
1554         * disassemble.c: Break mn10x00 support into 10200 and 10300
1555         support.
1556         * configure.in: Likewise.
1557         * configure: Rebuilt.
1558
1559 Thu Oct  3 15:59:12 1996  Jason Molenda  (crash@godzilla.cygnus.co.jp)
1560
1561         * Makefile.in (MOSTLYCLEAN): Move config.log to distclean.
1562
1563 Wed Oct  2 23:28:42 1996  Jeffrey A Law  (law@cygnus.com)
1564
1565         * mn10x00-opc.c, mn10x00-dis.c: New files for Matsushita
1566         MN10x00 processors.
1567         * disassemble (ARCH_mn10x00): Define.
1568         (disassembler): Handle bfd_arch_mn10x00.
1569         * configure.in: Recognize bfd_mn10x00_arch.
1570         * configure: Rebuilt.
1571
1572 Tue Oct  1 10:49:11 1996  Ian Lance Taylor  <ian@cygnus.com>
1573
1574         * i386-dis.c (op_rtn): Change to be a pointer.  Adjust uses
1575         accordingly.  Don't declare functions using op_rtn.
1576
1577 Fri Sep 27 18:28:59 1996  Stu Grossman  (grossman@critters.cygnus.com)
1578
1579         * v850-dis.c (disassemble):  Add memaddr argument.  Re-arrange
1580         params to be more standard.
1581         * (disassemble):  Print absolute addresses and symbolic names for
1582         branch and jump targets.
1583         * v850-opc.c (v850_operand):  Add displacement flag to 9 and 22
1584         bit operands.
1585         * (v850_opcodes):  Add breakpoint insn.
1586
1587 Mon Sep 23 12:32:26 1996  Ian Lance Taylor  <ian@cygnus.com>
1588
1589         * m68k-opc.c: Move the fmovemx data register cases before the
1590         other cases, so that they get recognized before the data register
1591         does gets treated as a degenerate register list.
1592
1593 Tue Sep 17 12:06:51 1996  Ian Lance Taylor  <ian@cygnus.com>
1594
1595         * mips-opc.c: Add a case for "div" and "divu" with two registers
1596         and a destination of $0.
1597
1598 Tue Sep 10 16:12:39 1996  Fred Fish  <fnf@rtl.cygnus.com>
1599
1600         * mips-dis.c (print_insn_arg): Add prototype.
1601         (_print_insn_mips): Ditto.
1602
1603 Mon Sep  9 14:26:26 1996  Ian Lance Taylor  <ian@cygnus.com>
1604
1605         * mips-dis.c (print_insn_arg): Print condition code registers as
1606         $fccN.
1607
1608 Tue Sep  3 12:09:46 1996  Doug Evans  <dje@canuck.cygnus.com>
1609
1610         * sparc-opc.c (sparc_opcodes): Add setuw, setsw, setx.
1611
1612 Tue Sep  3 12:05:25 1996  Jeffrey A Law  (law@cygnus.com)
1613
1614         * v850-dis.c (disassemble): Make static.  Provide prototype.
1615
1616 Sun Sep  1 22:30:40 1996  Jeffrey A Law  (law@cygnus.com)
1617
1618         * v850-opc.c (insert_d9, insert_d22): Fix boundary case
1619         in range checks.
1620
1621 Sat Aug 31 01:27:26 1996  Jeffrey A Law  (law@cygnus.com)
1622
1623         * v850-dis.c (disassemble): Handle insertion of ',', '[' and
1624         ']' characters into the output stream.
1625         * v850-opc.c (v850_opcodes: Remove size field from all opcodes.
1626         Add "memop" field to all opcodes (for the disassembler).
1627         Reorder opcodes so that "nop" comes before "mov" and "jr"
1628         comes before "jarl".
1629
1630         * v850-dis.c (print_insn_v850): Fix typo in last change.
1631
1632         * v850-dis.c (print_insn_v850): Properly handle disassembling
1633         a two byte insn at the end of a memory region when the memory
1634         region's size is only two byte aligned.
1635
1636         * v850-dis.c (v850_cc_names): Fix stupid thinkos.
1637
1638         * v850-dis.c (v850_reg_names): Define.
1639         (v850_sreg_names, v850_cc_names): Likewise.
1640         (disassemble): Very rough cut at printing operands (unformatted).
1641
1642         * v850-opc.c (BOP_MASK): Fix.
1643         (v850_opcodes): Fix mask for jarl and jr.
1644
1645         * v850-dis.c: New file.  Skeleton for disassembler support.
1646         * Makefile.in Remove v850 references, they're not needed here.
1647         * configure.in: Add v850-dis.o when building v850 toolchains.
1648         * configure: Rebuilt.
1649         * disassemble.c (disassembler): Call v850 disassembler.
1650
1651         * v850-opc.c (insert_d8_7, extract_d8_7): New functions.
1652         (insert_d8_6, extract_d8_6): New functions.
1653         (v850_operands): Rename D7S to D7; operand for D7 is unsigned.
1654         Rename D8 to D8_7, use {insert,extract}_d8_7 routines.
1655         Add D8_6.
1656         (IF4A, IF4B): Use "D7" instead of "D7S".
1657         (IF4C, IF4D): Use "D8_7" instead of "D8".
1658         (IF4E, IF4F): New.  Use "D8_6".
1659         (v850_opcodes): Use IF4A/IF4B for sld.b/sst.b.  Use IF4C/IF4D for
1660         sld.h/sst.h.  Use IF4E/IF4F for sld.w/sst.w.
1661
1662         * v850-opc.c (insert_d16_15, extract_d16_15): New functions.
1663         (v850_operands): Change D16 to D16_15, use special insert/extract
1664         routines.  New new D16 that uses the generic insert/extract code.
1665         (IF7A, IF7B): Use D16_15.
1666         (IF7C, IF7D): New.  Use D16.
1667         (v850_opcodes): Use IF7C and IF7D for ld.b and st.b.
1668
1669         * v850-opc.c (insert_d9, insert_d22): Slightly improve error
1670         message.  Issue an error if the branch offset is odd.
1671
1672         * v850-opc.c: Add notes about needing special insert/extract
1673         for all the load/store insns, except "ld.b" and "st.b".
1674
1675         * v850-opc.c (insert_d22, extract_d22): New functions.
1676         (v850_operands): Use insert_d22 and extract_d22 for
1677         D22 operands.
1678         (insert_d9): Fix range check.
1679
1680 Fri Aug 30 18:01:02 1996  J.T. Conklin  <jtc@hippo.cygnus.com>
1681
1682         * v850-opc.c (v850_operands): Add V850_OPERAND_SIGNED flag
1683         and set bits field to D9 and D22 operands.
1684
1685 Thu Aug 29 11:10:46 1996  Jeffrey A Law  (law@cygnus.com)
1686
1687         * v850-opc.c (v850_operands): Define SR2 operand.
1688         (v850_opcodes): "ldsr" uses R1,SR2.
1689
1690         * v850-opc.c (v850_opcodes): Fix opcode specs for
1691         sld.w, sst.b, sst.h, sst.w, and nop.
1692
1693 Wed Aug 28 15:55:43 1996  Jeffrey A Law  (law@cygnus.com)
1694
1695         * v850-opc.c (v850_opcodes): Add null opcode to mark the
1696         end of the opcode table.
1697
1698 Mon Aug 26 13:35:53 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
1699
1700         * d10v-opc.c (pre_defined_registers): Added register pairs,
1701         "r0-r1", "r2-r3", etc.
1702
1703 Fri Aug 23 00:27:01 1996  Jeffrey A Law  (law@cygnus.com)
1704
1705         * v850-opc.c (v850_operands): Make I16 be a signed operand.
1706         Create I16U for an unsigned 16bit mmediate operand.
1707         (v850_opcodes): Use I16U for "ori", "andi" and "xori".
1708
1709         * v850-opc.c (v850_operands): Define EP operand.
1710         (IF4A, IF4B, IF4C, IF4D): Use EP.
1711
1712         * v850-opc.c (v850_opcodes): Fix opcode numbers for "mov"
1713         with immediate operand, "movhi".  Tweak "ldsr".
1714
1715         * v850-opc.c (v850_opcodes): Get ld.[bhw] and st.[bhw]
1716         correct.  Get sld.[bhw] and sst.[bhw] closer.
1717
1718         * v850-opc.c (v850_operands): "not" is a two byte insn
1719
1720         * v850-opc.c (v850_opcodes): Correct bit pattern for setf.
1721
1722         * v850-opc.c (v850_operands): D16 inserts at offset 16!
1723
1724         * v850-opc.c (two): Get order of words correct.
1725
1726         * v850-opc.c (v850_operands): I16 inserts at offset 16!
1727
1728         * v850-opc.c (v850_operands): Add "SR1" and "SR2" for system
1729         register source and destination operands.
1730         (v850_opcodes): Use SR1 and SR2 for "ldsr" and "stsr".
1731
1732         * v850-opc.c (v850_opcodes): Fix thinko in "jmp" opcode.  Fix
1733         same thinko in "trap" opcode.
1734
1735         * v850-opc.c (v850_opcodes): Add initializer for size field
1736         on all opcodes.
1737
1738         * v850-opc.c (v850_operands): D6 -> DS7.  References changed.
1739         Add D8 for 8-bit unsigned field in short load/store insns.
1740         (IF4A, IF4D): These both need two registers.
1741         (IF4C, IF4D): Define.  Use 8-bit unsigned field.
1742         (v850_opcodes): For "sld.h", "sld.w", "sst.h", "sst.w", use
1743         IF4C & IF4D.  For "trap" use I5U, not I5.  Add IF1 operand
1744         for "ldsr" and "stsr".
1745         * v850-opc.c (v850_operands): 3-bit immediate for bit insns
1746         is unsigned.
1747
1748         * v850-opc.c (v850_opcodes): Correct short store half (sst.h) and
1749         short store word (sst.w).
1750
1751 Thu Aug 22 16:57:27 1996  J.T. Conklin  <jtc@rtl.cygnus.com>
1752
1753         * v850-opc.c (v850_operands): Added insert and extract fields,
1754         pointers to functions that handle unusual operand encodings.
1755
1756 Thu Aug 22 01:05:24 1996  Jeffrey A Law  (law@cygnus.com)
1757
1758         * v850-opc.c (v850_opcodes): Enable "trap".
1759
1760         * v850-opc.c (v850_opcodes): Fix order of displacement
1761         and register for "set1", "clr1", "not1", and "tst1".
1762
1763 Wed Aug 21 18:46:26 1996  Jeffrey A Law  (law@cygnus.com)
1764
1765         * v850-opc.c (v850_operands): Add "B3" support.
1766         (v850_opcodes): Fix and enable "set1", "clr1", "not1"
1767         and "tst1".
1768
1769         * v850-opc.c (v850_opcodes): "jmp" has only an R1 operand.
1770
1771         * v850-opc.c: Close unterminated comment.
1772
1773 Wed Aug 21 17:31:26 1996  J.T. Conklin  <jtc@hippo.cygnus.com>
1774
1775         * v850-opc.c (v850_operands): Add flags field.
1776         (v850_opcodes): add move opcodes.
1777
1778 Tue Aug 20 14:41:03 1996  J.T. Conklin  <jtc@hippo.cygnus.com>
1779
1780         * Makefile.in (ALL_MACHINES): Add v850-opc.o.
1781         * configure: (bfd_v850v_arch) Add new case.
1782         * configure.in: (bfd_v850_arch) Add new case.
1783         * v850-opc.c: New file.
1784
1785 Mon Aug 19 15:21:38 1996  Doug Evans  <dje@canuck.cygnus.com>
1786
1787         * sparc-dis.c (print_insn_sparc): Handle little endian sparcs.
1788
1789 Thu Aug 15 13:14:43 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
1790
1791         * d10v-opc.c: Add additional information to the opcode
1792         table to help determinine which instructions can be done
1793         in parallel.
1794
1795 Thu Aug 15 13:11:13 1996  Stan Shebs  <shebs@andros.cygnus.com>
1796
1797         * mpw-make.sed: Update editing of include pathnames to be
1798         more general.
1799
1800 Thu Aug 15 16:28:41 1996  James G. Smith  <jsmith@cygnus.co.uk>
1801
1802         * arm-opc.h: Added "bx" instruction definition.
1803
1804 Wed Aug 14 17:00:04 1996  Richard Henderson  <rth@tamu.edu>
1805
1806         * alpha-opc.c (EV4EXTHWINDEX): Field width should be 8 not 5.
1807
1808 Mon Aug 12 14:30:37 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
1809
1810         * d10v-opc.c (d10v_opcodes): Minor fixes to addi and bl.l.
1811
1812 Fri Aug  9 13:21:59 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
1813
1814         * d10v-opc.c (d10v_opcodes): Correct 'mv' unit entry to EITHER.
1815
1816 Thu Aug  8 12:43:52 1996  Klaus Kaempf  <kkaempf@progis.de>
1817
1818         * makefile.vms: Update for alpha-opc changes.
1819
1820 Wed Aug  7 11:55:10 1996  Ian Lance Taylor  <ian@cygnus.com>
1821
1822         * i386-dis.c (print_insn_i386): Actually return the correct value.
1823         (ONE, OP_ONE): #ifdef out; not used.
1824
1825 Fri Aug  2 17:47:03 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
1826
1827         * d10v-opc.c (d10v_opcodes): Added 2 accumulator sub instructions.
1828         Changed subi operand type to treat 0 as 16.
1829
1830 Wed Jul 31 16:21:41 1996  Ian Lance Taylor  <ian@cygnus.com>
1831
1832         * m68k-opc.c: Add cpushl for the mcf5200.  From Ken Rose
1833         <rose@netcom.com>.
1834
1835 Wed Jul 31 14:39:27 1996  James G. Smith  <jsmith@cygnus.co.uk>
1836
1837         * arm-opc.h: (arm_opcodes): Added halfword and sign-extension
1838         memory transfer instructions. Add new format string entries %h and %s.
1839         * arm-dis.c: (print_insn_arm): Provide decoding of the new
1840         formats %h and %s.
1841
1842 Fri Jul 26 11:45:04 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
1843
1844         * d10v-opc.c (d10v_operands): Added UNUM4S; a 4-bit accumulator shift.
1845         (d10v_opcodes): Modified accumulator shift instructions to use UNUM4S.
1846
1847 Fri Jul 26 14:01:43 1996  Ian Lance Taylor  <ian@cygnus.com>
1848
1849         * alpha-dis.c (print_insn_alpha_osf): Remove.
1850         (print_insn_alpha_vms): Remove.
1851         (print_insn_alpha): Make globally visible.  Chose the register
1852         names based on info->flavour.
1853         * disassemble.c: Always return print_insn_alpha for the alpha.
1854
1855 Thu Jul 25 15:24:17 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
1856
1857         * d10v-dis.c (dis_long): Handle unknown opcodes.
1858
1859 Thu Jul 25 12:08:09 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
1860
1861         * d10v-opc.c: Changes to support signed and unsigned numbers.
1862         All instructions with the same name that have long and short forms
1863         now end in ".l" or ".s".  Divs added.
1864         * d10v-dis.c: Changes to support signed and unsigned numbers.
1865
1866 Tue Jul 23 11:02:53 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
1867
1868         * d10v-dis.c: Change all functions to use info->print_address_func.
1869
1870 Mon Jul 22 15:38:53 1996  Andreas Schwab  <schwab@issan.informatik.uni-dortmund.de>
1871
1872         * m68k-opc.c (m68k_opcodes): Make opcode masks for the ColdFire
1873         move ccr/sr insns more strict so that the disassembler only
1874         selects them when the addressing mode is data register.
1875
1876 Mon Jul 22 11:25:24 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
1877         * d10v-opc.c (pre_defined_registers):  Declare.
1878         * d10v-dis.c (print_operand): Now uses pre_defined_registers
1879         to pick a better name for the registers.
1880
1881 Mon Jul 22 13:47:23 1996  Ian Lance Taylor  <ian@cygnus.com>
1882
1883         * sparc-opc.c: Fix opcode values for fpack16, and fpackfix.  Fix
1884         operands for fexpand and fpmerge.  From Christian Kuehnke
1885         <Christian.Kuehnke@arbi.informatik.uni-oldenburg.de>.
1886
1887 Mon Jul 22 13:17:06 1996  Richard Henderson  <rth@tamu.edu>
1888
1889         * alpha-dis.c (print_insn_alpha): No longer the user-visible
1890         print routine.  Take new regnames and cpumask arguments.
1891         Kill the environment variable nonsense.
1892         (print_insn_alpha_osf): New function.  Do OSF/1 style regnames.
1893         (print_insn_alpha_vms): New function.  Do VMS style regnames.
1894         * disassemble.c (disassembler): Test bfd flavour to pick
1895         between OSF and VMS routines.  Default to OSF.
1896
1897 Thu Jul 18 17:19:34 1996  Ian Lance Taylor  <ian@cygnus.com>
1898
1899         * configure.in: Call AC_SUBST (INSTALL_SHLIB).
1900         * configure: Rebuild.
1901         * Makefile.in (install): Use @INSTALL_SHLIB@.
1902
1903 Wed Jul 17 14:39:05 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
1904
1905         * configure: (bfd_d10v_arch) Add new case.
1906         * configure.in: (bfd_d10v_arch) Add new case.
1907         * d10v-dis.c: New file.
1908         * d10v-opc.c: New file.
1909         * disassemble.c (disassembler) Add entry for d10v.
1910
1911 Wed Jul 17 10:12:05 1996  J.T. Conklin  <jtc@rtl.cygnus.com>
1912
1913         * m68k-opc.c (m68k_opcodes): Fix bugs in coldfire insns relating
1914         to bcc, trapfl, subxl, and wddata discovered by Andreas Schwab.
1915
1916 Mon Jul 15 16:59:55 1996  Stu Grossman  (grossman@critters.cygnus.com)
1917
1918         * i386-dis.c:  Get rid of print_insn_i8086.  Use info.mach to
1919         distinguish between variants of the instruction set.
1920         * sparc-dis.c:  Get rid of print_insn_sparclite.  Use info.mach to
1921         distinguish between variants of the instruction set.
1922
1923 Fri Jul 12 10:12:01 1996  Stu Grossman  (grossman@critters.cygnus.com)
1924
1925         * i386-dis.c (print_insn_i8086):  New routine to disassemble using
1926         the 8086 instruction set.
1927         * i386-dis.c:  General cleanups.  Make most things static.  Add
1928         prototypes.  Get rid of static variables aflags and dflags.  Pass
1929         them as args (to almost everything).
1930
1931 Thu Jul 11 11:58:44 1996  Jeffrey A Law  (law@cygnus.com)
1932
1933         * h8300-dis.c (bfd_h8_disassemble): Handle macregs in ldmac insns.
1934
1935         * h8300-dis.c (bfd_h8_disassemble): Handle "ldm.l" and "stm.l".
1936
1937         * h8300-dis.c (bfd_h8_disassemble): "abs" is implicitly two
1938         if the next arg is marked with SRC_IN_DST.  Gross.
1939
1940         * h8300-dis.c (bfd_h8_disassemble): Print "exr" when
1941         we're looking for and find EXR.
1942
1943         * h8300-dis.c (bfd_h8_disassemble): We don't have a match
1944         if we're looking for KBIT and we don't find it.
1945
1946         * h8300-dis.c (bfd_h8_disassemble): Mask off unwanted bits
1947         for L_3 and L_2.
1948
1949         * h8300-dis.c (bfd_h8_disassemble): Don't set plen for
1950         3bit immediate operands.
1951
1952 Tue Jul  9 10:55:20 1996  Ian Lance Taylor  <ian@cygnus.com>
1953
1954         * Released binutils 2.7.
1955
1956         * alpha-opc.c: Add new case of "mov".  From Klaus Kaempf
1957         <kkaempf@progis.ac-net.de>.
1958
1959 Thu Jul  4 11:42:51 1996  Ian Lance Taylor  <ian@cygnus.com>
1960
1961         * alpha-opc.c: Correct second case of "mov" to use OPRL.
1962
1963 Wed Jul  3 16:03:47 1996  Stu Grossman  (grossman@critters.cygnus.com)
1964
1965         * sparc-dis.c (print_insn_sparclite):  New routine to print
1966         sparclite instructions.
1967
1968 Wed Jul  3 14:21:18 1996  J.T. Conklin  <jtc@rtl.cygnus.com>
1969
1970         * m68k-opc.c (m68k_opcodes): Add coldfire support.
1971
1972 Fri Jun 28 15:53:51 1996  Doug Evans  <dje@canuck.cygnus.com>
1973
1974         * sparc-opc.c (asi_table): Add #ASI_N, #ASI_N_L, #ASI_NUCLEUS,
1975         #ASI_NUCLEUS_LITTLE.  Rename #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_L
1976         to #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_LITTLE.
1977
1978 Tue Jun 25 22:58:31 1996  Jason Molenda  (crash@godzilla.cygnus.co.jp)
1979
1980         * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir):
1981         Use autoconf-set values.
1982         (docdir, oldincludedir): Removed.
1983         * configure.in (AC_PREREQ): autoconf 2.5 or higher.
1984
1985 Fri Jun 21 13:53:36 1996  Richard Henderson  <rth@tamu.edu>
1986
1987         * alpha-opc.c: New file.
1988         * alpha-opc.h: Remove.
1989         * alpha-dis.c: Complete rewrite to use new opcode table.
1990         * configure.in: For bfd_alpha_arch, use alpha-opc.o.
1991         * configure: Rebuild with autoconf 2.10.
1992         * Makefile.in (ALL_MACHINES): Add alpha-opc.o.
1993         (alpha-dis.o): Depend upon $(INCDIR)/opcode/alpha.h, not
1994         alpha-opc.h.
1995         (alpha-opc.o): New target.
1996
1997 Wed Jun 19 15:55:12 1996  Ian Lance Taylor  <ian@cygnus.com>
1998
1999         * sparc-dis.c (print_insn_sparc): Remove unused local variable i.
2000         Set imm_added_to_rs1 even if the source and destination register
2001         are not the same.
2002
2003         * sparc-opc.c: Add some two operand forms of the wr instruction.
2004
2005 Tue Jun 18 15:58:27 1996  Jeffrey A. Law  <law@rtl.cygnus.com>
2006
2007         * h8300-dis.c (bfd_h8_disassemble): Rename "hmode" argument
2008         to just "mode".
2009
2010         * disassemble.c (disassembler): Handle H8/S.
2011         * h8300-dis.c (print_insn_h8300s): New function for H8/S.
2012
2013 Tue Jun 18 18:06:50 1996  Ian Lance Taylor  <ian@cygnus.com>
2014
2015         * sparc-opc.c: Add beq/teq as aliases for be/te.
2016
2017         * ppc-opc.c: Fix fcmpo opcode.  From Sergei Steshenko
2018         <sergei@msil.sps.mot.com>.
2019
2020 Tue Jun 18 15:08:54 1996  Klaus Kaempf  <kkaempf@progis.de>
2021
2022         * makefile.vms: New file.
2023
2024         * alpha-dis.c (print_insn_alpha): Print lda ra,lit(rz) as mov.
2025
2026 Mon Jun 10 18:50:38 1996  Ian Lance Taylor  <ian@cygnus.com>
2027
2028         * h8300-dis.c (bfd_h8_disassemble): Always print ABS8MEM with :8,
2029         regardless of plen.
2030
2031 Tue Jun  4 09:15:53 1996  Doug Evans  <dje@canuck.cygnus.com>
2032
2033         * i386-dis.c (OP_OFF): Call append_prefix.
2034
2035 Thu May 23 15:18:23 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
2036
2037         * ppc-opc.c (instruction encoding macros): Add explicit casts to
2038         unsigned long to silence a warning from the Solaris PowerPC
2039         compiler.
2040
2041 Thu Apr 25 19:33:32 1996  Doug Evans  <dje@canuck.cygnus.com>
2042
2043         * sparc-opc.c (sparc_opcodes): Add ultrasparc vis extensions.
2044
2045 Mon Apr 22 17:12:35 1996  Doug Evans  <dje@blues.cygnus.com>
2046
2047         * sparc-dis.c (X_IMM,X_SIMM): New macros.
2048         (X_IMM13): Delete.
2049         (print_insn_sparc): Merge cases i,I,j together.  New cases X,Y.
2050         * sparc-opc.c (sparc_opcodes): Use X for 5 bit shift constants,
2051         Y for 6 bit shift constants.  Rewrite entries for crdcxt, cwrcxt,
2052         cpush, cpusha, cpull sparclet insns.
2053
2054 Wed Apr 17 14:20:22 1996  Doug Evans  <dje@canuck.cygnus.com>
2055
2056         * sparc-dis.c (compute_arch_mask): Replace ANSI style def with K&R.
2057
2058 Thu Apr 11 17:30:02 1996  Ian Lance Taylor  <ian@cygnus.com>
2059
2060         * sparc-opc.c: Set F_FBR on floating point branch instructions.
2061         Set F_FLOAT on other floating point instructions.
2062
2063 Mon Apr  8 17:02:48 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
2064
2065         * ppc-opc.c (PPC860): Macro for 860/821 specific instructions and
2066         registers.
2067         (powerpc_opcodes): Add 860/821 specific SPRs.
2068
2069 Mon Apr  8 14:00:44 1996  Ian Lance Taylor  <ian@cygnus.com>
2070
2071         * configure.in: Permit --enable-shared to specify a list of
2072         directories.  Set and substitute BFD_PICLIST.
2073         * configure: Rebuild.
2074         * Makefile.in (BFD_PICLIST): Rename from BFD_LIST.  Change all
2075         uses.  Set to @BFD_PICLIST@.
2076
2077 Fri Apr  5 17:12:27 1996  Jeffrey A Law  (law@cygnus.com)
2078
2079         * h8300-dis.c (bfd_h8_disassemble): Use "bit" for L_3 immediates,
2080         not "abs", which may be needed for the absolute in something
2081         like btst #0,@10:8.  Print L_3 immediates separately from other
2082         immediates.  Change ABSMOV reference to ABS8MEM.
2083
2084 Wed Apr  3 10:40:45 1996  Doug Evans  <dje@canuck.cygnus.com>
2085
2086         * sparc-dis.c (opcodes_initialized): Move inside print_insn_sparc.
2087         (current_arch_mask): New static global.
2088         (compute_arch_mask): New static function.
2089         (print_insn_sparc): Delete sparc_v9_p.  New static local
2090         current_mach.  Resort opcode table if current_mach changes.
2091         Generalize "insn not supported" test.
2092         (compare_opcodes): Prefer supported opcodes to nonsupported ones.
2093         Delete test for v9/!v9.
2094         * sparc-opc.c (MASK_*): Use SPARC_OPCODE_ARCH_MASK.
2095         (v6notlet): Define.
2096         (brfc): Split into CBR and FBR for coprocessor/fp branches.
2097         (brfcx): Renamed to FBRX.
2098         (condfc): Renamed to CONDFC.  Pass v6notlet to CBR (standard
2099         coprocessor mnemonics are not supported on the sparclet).
2100         (condf): Renamed to CONDF.
2101         (SLCBCC2): Delete F_ALIAS flag.
2102
2103 Sat Mar 30 21:45:59 1996  Doug Evans  <dje@canuck.cygnus.com>
2104
2105         * sparc-opc.c (sparc_opcodes): rd must be 0 for
2106         mov foo,{%y,%psr,%wim,%tbr}.  Support mov foo,%asrX.
2107
2108 Fri Mar 29 13:02:40 1996  Ian Lance Taylor  <ian@cygnus.com>
2109
2110         * Makefile.in (config.status): Depend upon BFD VERSION file, so
2111         that the shared library version number is set correctly.
2112
2113 Tue Mar 26 15:47:14 1996  Ian Lance Taylor  <ian@cygnus.com>
2114
2115         * configure.in: Use AC_CHECK_TOOL to find ar and ranlib.  From
2116         Miles Bader <miles@gnu.ai.mit.edu>.
2117         * configure: Rebuild.
2118
2119 Sat Mar 16 13:04:07 1996  Fred Fish  <fnf@cygnus.com>
2120
2121         * z8kgen.c (internal, gas): Call xmalloc rather than unchecked
2122         malloc.
2123
2124 Tue Mar 12 12:14:10 1996  Ian Lance Taylor  <ian@cygnus.com>
2125
2126         * configure: Rebuild with autoconf 2.8.
2127
2128 Thu Mar  7 15:11:10 1996  Doug Evans  <dje@charmed.cygnus.com>
2129
2130         * sparc-dis.c (print_insn_sparc): Handle 'O' operand char like 'r'.
2131         * sparc-opc.c (sparc_opcodes): Use 'O' operand char for `neg reg'.
2132
2133 Tue Mar  5 15:51:57 1996  Ian Lance Taylor  <ian@cygnus.com>
2134
2135         * configure.in: Don't set SHLIB or SHLINK to an empty string,
2136         since they appear as targets in Makefile.in.
2137         * configure: Rebuild.
2138
2139 Mon Feb 26 13:03:40 1996  Stan Shebs  <shebs@andros.cygnus.com>
2140
2141         * mpw-make.sed: Edit out shared library support bits.
2142
2143 Tue Feb 20 20:48:28 1996  Doug Evans  <dje@charmed.cygnus.com>
2144
2145         * sparc-opc.c (v8,v6notv9): Add MASK_SPARCLET.
2146         (sparc_opcode_archs): Add MASK_V8 to sparclet entry.
2147         (sparc_opcodes): Add sparclet insns.
2148         (sparclet_cpreg_table): New static local.
2149         (sparc_{encode,decode}_sparclet_cpreg): New functions.
2150         * sparc-dis.c (print_insn_sparc): Handle sparclet cpregs.
2151
2152 Tue Feb 20 11:02:44 1996  Alan Modra  <alan@mullet.Levels.UniSA.Edu.Au>
2153
2154         * i386-dis.c (index16): New static variable.
2155         (putop): Print jecxz for 32 bit case, jcxz for 16 bit, not the
2156         other way around.
2157         (OP_indirE): Return result of OP_E.
2158         (OP_E): Check for 16 bit addressing mode, and disassemble
2159         correctly.  Optimised 32 bit case a little.  Don't print
2160         "(base,index,scale)" when sib specifies only an offset.
2161
2162 Mon Feb 19 12:32:17 1996  Ian Lance Taylor  <ian@cygnus.com>
2163
2164         * configure.in: Set and substitute SHLIB_DEP.
2165         * configure: Rebuild.
2166         * Makefile.in (SHLIB_DEP): New variable.
2167         (LIBIBERTY_LISTS, BFD_LIST): New variables.
2168         (stamp-piclist): Depend upon LIBIBERTY_LISTS and BFD_LIST.  If
2169         COMMON_SHLIB, add them to piclist with appropriate modifications.
2170         ($(SHLIB)): Depend upon $(SHLIB_DEP).  Don't check COMMON_SHLIB
2171         here: just use piclist.
2172
2173 Mon Feb 19 02:03:50 1996  Doug Evans  <dje@charmed.cygnus.com>
2174
2175         * sparc-dis.c (MASK_V9,V9_ONLY_P,V9_P): Define.
2176         (print_insn_sparc): Rewrite v9/not-v9 tests.
2177         (compare_opcodes): Likewise.
2178         * sparc-opc.c (MASK_<ARCH>): Define.
2179         (v6,v7,v8,sparclite,v9,v9a): Redefine.
2180         (sparclet,v6notv9): Define.
2181         (sparc_opcode_archs): Delete member `conflicts'.  Add `supported'.
2182         (sparc_opcodes): Delete F_NOTV9, use v6notv9 instead.
2183
2184 Thu Feb 15 14:45:05 1996  Ian Lance Taylor  <ian@cygnus.com>
2185
2186         * configure.in: Call AC_PROG_CC before configure.host.
2187         * configure: Rebuild.
2188
2189         * Makefile.in (SONAME): Remove leading ../bfd/ from $(SHLIB).
2190
2191 Wed Feb 14 19:01:27 1996  Alan Modra  <alan@spri.levels.unisa.edu.au>
2192
2193         * i386-dis.c (onebyte_has_modrm): New static array.
2194         (twobyte_has_modrm): New static array.
2195         (print_insn_i386): Only fetch the mod/reg/rm byte if it is needed.
2196
2197 Tue Feb 13 15:15:01 1996  Ian Lance Taylor  <ian@cygnus.com>
2198
2199         * Makefile.in ($(SHLINK)): Check ts against $(SHLIB), not
2200         $(SHLINK).
2201
2202 Mon Feb 12 16:26:06 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
2203
2204         * ppc-opc.c (PPC): Undef, so default defination on Windows NT
2205         doesn't conflict.
2206
2207 Wed Feb  7 13:59:54 1996  Ian Lance Taylor  <ian@cygnus.com>
2208
2209         * m68k-opc.c (m68k_opcodes): The bkpt instruction is supported on
2210         m68010up, not just m68020up | cpu32.
2211
2212         * Makefile.in (SONAME): New variable.
2213         ($(SHLINK)): Make a link to the transformed name, as well.
2214         (stamp-tshlink): New target.
2215         (install): Skip stamp-tshlink during install.
2216
2217 Tue Feb  6 12:28:54 1996  Ian Lance Taylor  <ian@cygnus.com>
2218
2219         * configure.in: Call AC_ARG_PROGRAM.
2220         * configure: Rebuild.
2221         * Makefile.in (program_transform_name): New variable.
2222         (install): Transform library name before installing it.
2223
2224 Mon Feb  5 16:14:42 1996  Ian Lance Taylor  <ian@cygnus.com>
2225
2226         * i960-dis.c (mem): Add HX dcinva instruction.
2227
2228         Support for building as a shared library, based on patches from
2229         Alan Modra <alan@spri.levels.unisa.edu.au>:
2230         * configure.in: Add AC_ARG_ENABLE for shared and commonbfdlib.
2231         New substitutions: ALLLIBS, PICFLAG, SHLIB, SHLIB_CC,
2232         SHLIB_CFLAGS, COMMON_SHLIB, SHLINK.
2233         * configure: Rebuild.
2234         * Makefile.in (ALLLIBS): New variable.
2235         (PICFLAG, SHLIB, SHLIB_CC, SHLIB_CFLAGS): New variables.
2236         (COMMON_SHLIB, SHLINK): New variables.
2237         (.c.o): If PICFLAG is set, compile twice, once PIC, once normal.
2238         (STAGESTUFF): Remove variable.
2239         (all): Depend upon $(ALLLIBS) rather than $(TARGETLIB).
2240         (stamp-piclist, piclist): New targets.
2241         ($(SHLIB), $(SHLINK)): New targets.
2242         ($(OFILES)): Depend upon stamp-picdir.
2243         (disassemble.o): Build twice if PICFLAG is set.
2244         (MOSTLYCLEAN): Add pic/*.o.
2245         (clean): Remove $(SHLIB), $(SHLINK), piclist, and stamp-piclist.
2246         (distclean): Remove pic and stamp-picdir.
2247         (install): Install shared libraries.
2248         (stamp-picdir): New target.
2249
2250 Fri Feb  2 17:15:25 1996  Doug Evans  <dje@charmed.cygnus.com>
2251
2252         * sparc-dis.c (print_insn_sparc): Delete DISASM_RAW_INSN support.
2253         Print unknown instruction as "unknown", rather than in hex.
2254
2255 Tue Jan 30 14:06:08 1996  Ian Lance Taylor  <ian@cygnus.com>
2256
2257         * dis-buf.c: Include "sysdep.h" before "dis-asm.h".
2258
2259 Thu Jan 25 20:24:07 1996  Doug Evans  <dje@charmed.cygnus.com>
2260
2261         * sparc-opc.c (sparc_opcode_archs): Mark v8/sparclite as conflicting.
2262
2263 Thu Jan 25 11:56:49 1996  Ian Lance Taylor  <ian@cygnus.com>
2264
2265         * i386-dis.c (print_insn_i386): Only fetch the mod/reg/rm byte
2266         when necessary.  From Ulrich Drepper
2267         <drepper@myware.rz.uni-karlsruhe.de>.
2268
2269 Thu Jan 25 03:39:10 1996  Doug Evans  <dje@charmed.cygnus.com>
2270
2271         * sparc-dis.c (print_insn_sparc): NUMOPCODES replaced with
2272         sparc_num_opcodes.  Update architecture enum values.
2273         * sparc-opc.c (sparc_opcode_archs): Replaces architecture_pname.
2274         (sparc_opcode_lookup_arch): New function.
2275         (sparc_num_opcodes): Renamed from bfd_sparc_num_opcodes.
2276         (sparc_opcodes): Add v9a shutdown insn.
2277
2278 Mon Jan 22 08:29:59 1996  Doug Evans  <dje@charmed.cygnus.com>
2279
2280         * sparc-dis.c (print_insn_sparc): Renamed from print_insn.
2281         If DISASM_RAW_INSN, print insn in hex.  Handle v9a as opcode
2282         architecture.
2283         (print_insn_sparc64): Deleted.
2284         * disassemble.c (disassembler, case bfd_arch_sparc): Always use
2285         print_insn_sparc.
2286
2287         * sparc-opc.c (architecture_pname): Add v9a.
2288
2289 Fri Jan 12 14:35:58 1996  David Mosberger-Tang  <davidm@AZStarNet.com>
2290
2291         * alpha-opc.h (alpha_insn_set): VAX floating point opcode was
2292         incorrectly defined as 0x16 when it should be 0x15.
2293         (FLOAT_FORMAT_MASK): function code is 11 bits, not just 7 bits!
2294         (alpha_insn_set): added cvtst and cvttq float ops.  Also added
2295         excb (exception barrier) which is defined in the Alpha
2296         Architecture Handbook version 2.
2297         * alpha-dis.c (print_insn_alpha): Fixed special-case decoding for
2298         OPERATE_FORMAT_CODE type instructions.  The bug caused mulq to be
2299         disassembled as or, for example.
2300
2301 Wed Jan 10 12:37:22 1996  Ian Lance Taylor  <ian@cygnus.com>
2302
2303         * mips-dis.c (print_insn_arg): Print cases 'i' and 'u' in hex.
2304         (_print_insn_mips): Change i from int to unsigned int.
2305
2306 Thu Jan  4 17:21:10 1996  David Edelsohn  <edelsohn@mhpcc.edu>
2307
2308         * ppc-opc.c (powerpc_opcodes): tlbi POWER opcode form different
2309         from tlbie PowerPC opcode.  Add PPC603 tlbld and tlbli.
2310
2311 Thu Dec 28 13:29:19 1995  John Hassey  <hassey@rtp.dg.com>
2312
2313         * i386-dis.c: Added Pentium Pro instructions.
2314
2315 Tue Dec 19 22:56:35 1995  Michael Meissner  <meissner@tiktok.cygnus.com>
2316
2317         * ppc-opc.c (fsqrt{,.}): Duplicate for PowerPC in addition to
2318         being for Power2.
2319
2320 Fri Dec 15 14:14:15 1995  J.T. Conklin  <jtc@rtl.cygnus.com>
2321
2322         * sh-opc.h (sh_nibble_type): Added REG_B.
2323         (sh_arg_type): Added A_REG_B.
2324         (sh_table): Added pref and bank reg versions of ldc, ldc.l, stc
2325         and stc.l opcodes.
2326         * sh-dis.c (print_insn_shx): Added cases for REG_B and A_REG_B.
2327
2328 Fri Dec 15 16:44:31 1995  Ian Lance Taylor  <ian@cygnus.com>
2329
2330         * disassemble.c (disassembler): Use new bfd_big_endian macro.
2331
2332 Tue Dec 12 12:22:24 1995  Ian Lance Taylor  <ian@cygnus.com>
2333
2334         * Makefile.in (distclean): Remove stamp-h.  From Ronald
2335         F. Guilmette <rfg@monkeys.com>.
2336
2337 Tue Dec  5 13:42:44 1995  Stan Shebs  <shebs@andros.cygnus.com>
2338
2339         From David Mosberger-Tang  <davidm@azstarnet.com>:
2340         * alpha-dis.c (print_insn_alpha): fixed decoding of cpys
2341         instruction.
2342
2343 Mon Dec  4 12:29:05 1995  J.T. Conklin  <jtc@rtl.cygnus.com>
2344
2345         * sh-opc.h (sh_arg_type): Added A_SSR and A_SPC.
2346         (sh_table): Added many SH3 opcodes.
2347         * sh-dis.c (print_insn_shx): Added cases for A_SSR and A_SPC.
2348
2349 Fri Dec  1 07:42:18 1995  Michael Meissner  <meissner@tiktok.cygnus.com>
2350
2351         * ppc-opc.c (subfc., subfco): Mark this PPCCOM, not PPC.
2352         (subco,subco.): Mark this PPC, not PPCCOM.
2353
2354 Mon Nov 27 13:09:52 1995  Ian Lance Taylor  <ian@cygnus.com>
2355
2356         * configure: Rebuild with autoconf 2.7.
2357
2358 Tue Nov 21 18:28:06 1995  Ian Lance Taylor  <ian@cygnus.com>
2359
2360         * configure: Rebuild with autoconf 2.6.
2361
2362 Wed Nov 15 19:02:53 1995  Ken Raeburn  <raeburn@cygnus.com>
2363
2364         * configure.in: Sort list of architectures.  Accept but do nothing
2365         for alliant, convex, pyramid, romp, and tahoe.
2366
2367 Wed Nov  8 20:18:59 1995  Ian Lance Taylor  <ian@cygnus.com>
2368
2369         * a29k-dis.c (print_special): Change num to unsigned int.
2370
2371 Wed Nov  8 20:10:35 1995  Eric Freudenthal <freudenthal@nyu.edu>
2372
2373         * a29k-dis.c (print_insn): Cast insn24 to unsigned long when
2374         shifting it.
2375
2376 Tue Nov  7 15:21:06 1995  Ian Lance Taylor  <ian@cygnus.com>
2377
2378         * configure.in: Call AC_CHECK_PROG to find and cache AR.
2379         * configure: Rebuilt.
2380
2381 Mon Nov  6 17:39:47 1995  Harry Dolan  <dolan@ssd.intel.com>
2382
2383         * configure.in: Add case for bfd_i860_arch.
2384         * configure: Rebuild.
2385
2386 Fri Nov  3 12:45:31 1995  Ian Lance Taylor  <ian@cygnus.com>
2387
2388         * m68k-opc.c (m68k_opcodes): Correct fmoveml operands.
2389         * m68k-dis.c (NEXTSINGLE): Change i to unsigned int.
2390         (NEXTDOUBLE): Likewise.
2391         (print_insn_m68k): Don't match fmoveml if there is more than one
2392         register in the list.
2393         (print_insn_arg): Handle a place of '8' for a type of 'L'.
2394
2395 Thu Nov  2 23:06:33 1995  Ian Lance Taylor  <ian@cygnus.com>
2396
2397         * m68k-opc.c: Use #W rather than #w.
2398         * m68k-dis.c (print_insn_arg): Handle new 'W' place.
2399
2400 Wed Nov  1 13:30:24 1995  Ian Lance Taylor  <ian@cygnus.com>
2401
2402         * m68k-opc.c (m68k_opcode_aliases): Add dbfw as an alias for dbf,
2403         and likewise for all the dbxx opcodes.
2404
2405 Mon Oct 30 20:50:40 1995  Fred Fish  <fnf@cygnus.com>
2406
2407         * arc-dis.c: Include elf-bfd.h rather than libelf.h.
2408
2409 Mon Oct 23 11:11:34 1995  James G. Smith  <jsmith@pasanda.cygnus.co.uk>
2410
2411         * mips-opc.c: Added shorthand (V1) for INSN_4100 manifest. Added
2412         the VR4100 specific instructions to the mips_opcodes structure.
2413
2414 Thu Oct 19 11:05:23 1995  Stan Shebs  <shebs@andros.cygnus.com>
2415
2416         * mpw-config.in, mpw-make.sed: Remove ugly workaround for
2417         ugly Metrowerks bug in CW6, is fixed in CW7.
2418
2419 Mon Oct 16 12:59:01 1995  Michael Meissner  <meissner@tiktok.cygnus.com>
2420
2421         * ppc-opc.c (whole file): Add flags for common/any support.
2422
2423 Tue Oct 10 11:06:07 1995  Fred Fish  <fnf@cygnus.com>
2424
2425         * Makefile.in (BISON): Remove macro.
2426         (FLAGS_TO_PASS): Remove BISON.
2427
2428 Fri Oct  6 16:26:45 1995  Ken Raeburn  <raeburn@cygnus.com>
2429
2430         Mon Sep 25 22:49:32 1995  Andreas Schwab  <schwab@issan.informatik.uni-dortmund.de>
2431
2432         * m68k-dis.c (print_insn_m68k): Recognize all two-word
2433         instructions that take no args by looking at the match mask.
2434         (print_insn_arg): Always print "%" before register names.
2435         [case 'c']: Use "nc" for the no-cache case, as recognized by gas.
2436         [case '_']: Don't print "@#" before address.
2437         [case 'J']: Use "%s" as format string, not register name.
2438         [case 'B']: Treat place == 'C' like 'l' and 'L'.
2439
2440 Thu Oct  5 22:16:20 1995  Ken Raeburn  <raeburn@cygnus.com>
2441
2442         * i386-dis.c: Describe cmpxchg8b operand, and spell the opcode
2443         name correctly.
2444
2445 Tue Oct  3 08:30:20 1995  steve chamberlain  <sac@slash.cygnus.com>
2446
2447         From David Mosberger-Tang  <davidm@azstarnet.com>
2448
2449         * alpha-opc.h (MEMORY_FUNCTION_FORMAT_MASK): added.
2450         (alpha_insn_set): added definitions for VAX floating point
2451         instructions (Unix compilers don't generate these, but handcoded
2452         assembly might still use them).
2453
2454         * alpha-dis.c (print_insn_alpha): added support for disassembling
2455         the miscellaneous instructions in the Alpha instruction set.
2456
2457 Tue Sep 26 18:47:20 1995  Stan Shebs  <shebs@andros.cygnus.com>
2458
2459         * mpw-config.in: Add m68k-opc.c.o to BFD_MACHINES for m68k,
2460         no longer create sysdep.h, sed ppc-opc.c to work around a
2461         serious Metrowerks C bug.
2462         * mpw-make.in: Remove.
2463         * mpw-make.sed: New file, used by mpw-configure to edit
2464         Makefile.in into an MPW makefile.
2465
2466 Wed Sep 20 12:55:28 1995  Ian Lance Taylor  <ian@cygnus.com>
2467
2468         * Makefile.in (maintainer-clean): New synonym for realclean.
2469
2470 Tue Sep 19 15:28:36 1995  Ian Lance Taylor  <ian@cygnus.com>
2471
2472         * m68k-opc.c: Split pmove patterns which use 'P' into patterns
2473         which use '0', '1', and '2' instead.  Specify the proper size for
2474         a pmove immediate operand.  Correct the pmovefd patterns to be
2475         moves to a register, not from a register.
2476         * m68k-dis.c (print_insn_arg): Replace 'P' with '0', '1', '2'.
2477
2478 Thu Sep 14 11:58:22 1995  Doug Evans  <dje@canuck.cygnus.com>
2479
2480         * sparc-opc.c (sparc_opcodes): Mark all insns that reference
2481         %psr, %wim, %tbr as F_NOTV9.
2482
2483 Fri Sep  8 01:07:38 1995  Ian Lance Taylor  <ian@cygnus.com>
2484
2485         * Makefile.in (Makefile): Just rebuild Makefile when running
2486         config.status.
2487         (config.h, stamp-h): New targets.
2488         * configure.in: Call AC_CONFIG_HEADER and AC_CANONICAL_SYSTEM
2489         earlier.  Don't bother to call AC_ARG_PROGRAM.  Touch stamp-h when
2490         rebuilding config.h.
2491         * configure: Rebuild.
2492
2493         * mips-opc.c: Change unaligned loads and stores with "t,A"
2494         operands to use "t,A(b)".
2495
2496 Thu Sep  7 19:02:46 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
2497
2498         * sh-dis.c (print_insn_shx): Add F_FR0 support.
2499
2500 Thu Sep  7 19:02:46 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
2501
2502         * sh-dis.c (print_insn_shx): Change loop over op->arg[n] to iterate
2503         until 3 instead of until 2.
2504
2505 Wed Sep  6 21:21:33 1995  Ian Lance Taylor  <ian@cygnus.com>
2506
2507         * Makefile.in (ALL_CFLAGS): Define.
2508         (.c.o, disassemble.o): Use $(ALL_CFLAGS).
2509         (MOSTLYCLEAN): Add config.log.
2510         (distclean): Don't remove config.log.
2511         * configure.in: Substitute HDEFINES.
2512         * configure: Rebuild.
2513
2514 Wed Sep  6 15:08:09 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
2515
2516         * sh-opc.h (sh_arg_type): Add F_FR0.
2517         (sh_table, case fmac): Add F_FR0 as first argument.
2518
2519 Wed Sep  6 15:08:09 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
2520
2521         * sh-opc.h (sh_opcode_info): Increase arg array size to 4.
2522
2523 Tue Sep  5 18:28:10 1995  Doug Evans  <dje@canuck.cygnus.com>
2524
2525         * sparc-dis.c: Remove all references to NO_V9.
2526
2527 Tue Sep  5 20:03:26 1995  Ian Lance Taylor  <ian@cygnus.com>
2528
2529         * aclocal.m4: Just include ../bfd/aclocal.m4.
2530         * configure: Rebuild.
2531
2532 Tue Sep  5 16:09:59 1995  Doug Evans  <dje@canuck.cygnus.com>
2533
2534         * sparc-dis.c (X_DISP19): Define.
2535         (print_insn, case 'G'): Use it.
2536         (print_insn, case 'L'): Sign extend displacement.
2537
2538 Mon Sep  4 14:28:46 1995  Ian Lance Taylor  <ian@cygnus.com>
2539
2540         * configure.in: Run ../bfd/configure.host before AC_PROG_CC.
2541         Subsitute CFLAGS and AR.  Call AC_PROG_INSTALL.  Don't substitute
2542         host_makefile_frag or frags.
2543         * aclocal.m4: New file.
2544         * configure: Rebuild.
2545         * Makefile.in (INSTALL): Set to @INSTALL@.
2546         (INSTALL_PROGRAM): Set to @INSTALL_PROGRAM@.
2547         (INSTALL_DATA): Set to @INSTALL_DATA@.
2548         (AR): Set to @AR@.
2549         (AR_FLAGS): Set to rc rather than qc.
2550         (CC): Define as @CC@.
2551         (CFLAGS): Set to @CFLAGS@.
2552         (@host_makefile_frag@): Remove.
2553         (config.status): Remove dependency upon @frags@.
2554
2555         * configure.in: ../bfd/config.bfd now just sets shell variables.
2556         Use them rather than looking through target Makefile fragments.
2557         * configure: Rebuild.
2558
2559 Thu Aug 31 12:35:32 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
2560
2561         * sh-opc.h (ftrc): Change FPUL_N to FPUL_M.
2562
2563 Wed Aug 30 13:52:28 1995  Doug Evans  <dje@canuck.cygnus.com>
2564
2565         * sparc-opc.c (sparc_opcodes): Delete duplicate wr %y insn.
2566         Add clrx, iprefetch, signx, clruw, cas, casl, casx, casxl synthetic
2567         sparc64 insns.
2568
2569         * sparc-opc.c (sparc_opcodes): Fix prefetcha insn.
2570         (lookup_{name,value}): New functions.
2571         (prefetch_table): New static local.
2572         (sparc_{encode,decode}_prefetch): New functions.
2573         * sparc-dis.c (print_insn): Handle '*' arg (prefetch function).
2574
2575 Wed Aug 30 11:11:58 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
2576
2577         * sh-opc.h: Add blank lines to improve readabililty of sh3e
2578         instructions.
2579
2580 Wed Aug 30 11:09:38 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
2581
2582         * sh-dis.c: Correct comment on first line of file.
2583
2584 Tue Aug 29 15:37:18 1995  Doug Evans  <dje@canuck.cygnus.com>
2585
2586         * disassemble.c (disassembler): Handle bfd_mach_sparc64.
2587
2588         * sparc-opc.c (asi, membar): New static locals.
2589         (sparc_{encode,decode}_{asi,membar}): New functions.
2590         (sparc_opcodes, membar insn): Fix.
2591         * sparc-dis.c (print_insn): Call sparc_decode_asi.
2592         Support decoding of membar masks.
2593         (X_MEMBAR): Define.
2594
2595 Sat Aug 26 21:22:48 1995  Ian Lance Taylor  <ian@cygnus.com>
2596
2597         * m68k-opc.c (m68k_opcode_aliases): Add br, brs, brb, brw, brl.
2598
2599 Mon Aug 21 17:33:36 1995  Ian Lance Taylor  <ian@cygnus.com>
2600
2601         * m68k-opc.c (m68k_opcode_aliases): Add bhib as an alias for bhis,
2602         and likewise for the other branches.  Add bhs as an alias for bcc,
2603         and likewise for the size variants.  Add dbhs as an alias for
2604         dbcc.
2605
2606 Fri Aug 11 13:40:24 1995  Jeff Law  (law@snake.cs.utah.edu)
2607
2608         * sh-opc.h (FP sts instructions): Update to match reality.
2609
2610 Mon Aug  7 16:12:58 1995  Ian Lance Taylor  <ian@cygnus.com>
2611
2612         * m68k-dis.c: (fpcr_names): Add % before all register names.
2613         (reg_names): Likewise.
2614         (print_insn_arg): Don't explicitly print % before register names.
2615         Add % before register names in static array names.  In case 'r',
2616         print data registers as `@(Dn)', not `Dn@'.  When printing a
2617         memory address, don't print @# before it.
2618         (print_indexed): Change base_disp and outer_disp from int to
2619         bfd_vma.  Print using MIT syntax, not mutant invalid Motorola
2620         syntax.  Sign extend 8 byte displacement correctly.
2621         (print_base): Print using MIT syntax.  Print zpc when appropriate.
2622         Change parameter disp from int to bfd_vma.
2623
2624         * m68k-opc.c (m68k_opcode_aliases): Add jsrl and jsrs as aliases
2625         for jsr.
2626
2627 Mon Aug  7 02:21:40 1995  Jeff Law  (law@snake.cs.utah.edu)
2628
2629         * sh-dis.c (print_insn_shx): Handle new operand types F_REG_N,
2630         F_REG_M, FPSCR_M, FPSCR_N, FPUL_M and FPUL_N.
2631         * sh-opc.h (sh_arg_type): Add new operand types.
2632         (sh_table): Add new opcodes from SH3E Floating Point ISA.
2633
2634 Sat Aug  5 16:50:14 1995  Fred Fish  <fnf@cygnus.com>
2635
2636         * Makefile.in (distclean): Remove generated file config.h.
2637
2638 Sat Aug  5 16:50:14 1995  Fred Fish  <fnf@cygnus.com>
2639
2640         * Makefile.in (distclean): Remove generated file config.h.
2641
2642 Wed Aug  2 18:33:40 1995  Ian Lance Taylor  <ian@cygnus.com>
2643
2644         * m68k-opc.c: New file, holding tables from include/opcode/m68k.h.
2645         Clean up tables.
2646         * m68k-dis.c: Remove BREAK_UP_BIG_DECL stuff.
2647         (opcode): Remove.
2648         (print_insn_m68k): Change d to be const.  Use m68k_numopcodes
2649         rather than numopcodes.  Use m68k_opcodes rather than removed
2650         opcode function.  Don't check F_ALIAS.
2651         (print_insn_arg): Change first parameter to be const char *.
2652         * Makefile.in (ALL_MACHINES): Add m68k-opc.o.
2653         (m68k-opc.o): New target.
2654         * configure.in: Build m68k-opc.o for bfd_m68k_arch.
2655         * configure: Rebuild.
2656
2657 Wed Aug  2 08:23:38 1995  Doug Evans  <dje@canuck.cygnus.com>
2658
2659         * sparc-dis.c (HASH_SIZE, HASH_INSN): Define.
2660         (opcode_bits, opcode_hash_table): New variables.
2661         (opcodes_initialized): Renamed from opcodes_sorted.
2662         (build_hash_table): New function.
2663         (is_delayed_branch): Use hash table.
2664         (print_insn): Renamed from print_insn_sparc, made static.
2665         Build and use hash table.  If !sparc64, ignore sparc64 insns,
2666         and vice-versa if sparc64.
2667         (print_insn_sparc, print_insn_sparc64): New functions.
2668         (compare_opcodes): Move sparc64 opcodes to end.
2669         Print commutative insns with constant second.
2670         * sparc-opc.c (all non-v9 insns): Use flag F_NOTV9 instead of F_ALIAS.
2671
2672 Tue Aug  1 00:12:49 1995  Ian Lance Taylor  <ian@cygnus.com>
2673
2674         * sh-dis.c (print_insn_shx): Remove unused local dslot.  Use
2675         print_address_func for A_BDISP12 and A_BDISP8.  Correct test which
2676         avoids printing a delay slot in a delay slot.
2677         * sh-opc.h (sh_table): Fully bracket last entry.
2678
2679 Mon Jul 31 12:04:47 1995  Doug Evans  <dje@canuck.cygnus.com>
2680
2681         * sparc-opc.c (sllx, srax, srlx): Fix disassembly.
2682
2683 Wed Jul 12 00:59:34 1995  Ken Raeburn  <raeburn@kr-pc.cygnus.com>
2684
2685         * configure.in: Get host_makefile_frag from ${srcdir}.
2686
2687         * configure.in: Autoconfiscated.  Check for string[s].h.  Create
2688         config.h from config.in.  Don't set up sysdep.h link.
2689         * sysdep.h: New file.
2690         * configure, config.in: New files, generated from configure.in.
2691         * Makefile.in: Updated to be processed autoconf-style.
2692         (distclean): Keep sysdep.h.  Remove config.log and config.cache.
2693         (Makefile): Depend on config.status.
2694         (config.status): New rule.
2695         * configure.bat: Update Makefile substitutions.
2696
2697 Tue Jul 11 14:23:37 1995  Jeff Spiegel  <jeffs@lsil.com>
2698
2699         * mips-opc.c (L1): Define.
2700         (mips_opcodes): Add R4010 instructions: flushi, flushd, flushid,
2701         addciu, madd, maddu, ffc, ffs, msub, msubu, selsi, selsr, waiti,
2702         and wb.
2703
2704 Tue Jul 11 11:49:49 1995  Ian Lance Taylor  <ian@cygnus.com>
2705
2706         * mips-opc.c (mips_opcodes): For the move pseudo-op, prefer daddu
2707         if ISA 3 and addu otherwise, replacing or, since some MIPS chips
2708         have multiple add units but only a single logical unit.
2709
2710         * ppc-opc.c (powerpc_operands): Change CR to use a bitsize of 3,
2711         shifted by 18, without any insertion or extraction function.
2712         (insert_cr, extract_cr): Remove.
2713
2714 Wed Jun 21 20:05:39 1995  Ken Raeburn  <raeburn@cujo.cygnus.com>
2715
2716         * m68k-dis.c (print_insn_arg, print_indexed): Print "%" before
2717         register names.
2718
2719 Thu Jun 15 17:23:31 1995  Stan Shebs  <shebs@andros.cygnus.com>
2720
2721         * mpw-config.in: Add sh and i386 configs, remove sparc config.
2722         * sh-opc.h: Add copyright.
2723
2724 Mon Jun  5 03:30:43 1995  Ken Raeburn  <raeburn@kr-laptop.cygnus.com>
2725
2726         * Makefile.in (crunch-m68k): Delete extra target accidentally
2727         checked in a while ago.
2728
2729 Wed May 24 16:22:13 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
2730
2731         * sh-opc.h (sh_table): Add SH3 support.
2732
2733 Wed May 24 14:16:08 1995  Steve Chamberlain  <sac@slash.cygnus.com>
2734
2735         * sh-opc.h: Added bsrf and braf.
2736
2737 Wed May 10 14:28:16 1995 Richard Earnshaw (rearnsha@armltd.co.uk)
2738
2739         * arm-opc.h (arm_opcodes): Add 64-bit multiply patterns.  Delete
2740         bogus [ls]fm{ea,fd} patterns.
2741
2742         * arm-opc.h (arm_opcodes): Correct typos in stm, ldm, std, and ldc.
2743         * arm-dis.c (print_insn_arm): Make GIVEN a parameter, don't try and
2744         initialize it from memory.  Make function static.
2745         (print_insn_{big,little}_arm): New functions.
2746         * disassemble.c (disassembler, case bfd_arch_arm): Disassemble for
2747         the correct endianness.
2748
2749 Mon Apr 24 14:18:05 1995  Jason Molenda   (crash@phydeaux.cygnus.com>
2750
2751         * sh-opc.h (sh_nibble_type, sh_arg_type): remove trailing , from
2752         enum list.
2753
2754 Wed Apr 19 14:07:03 1995  Michael Meissner  <meissner@tiktok.cygnus.com>
2755
2756         * m68k-dis.c (opcode): Finish change made by Kung Hsu on April
2757         17th, so that it builds again using GCC as the compiler.
2758
2759 Tue Apr 18 12:14:51 1995  Ken Raeburn  <raeburn@cujo.cygnus.com>
2760
2761         * mips-dis.c (print_insn_little_mips): Cast return value from
2762         bfd_getl32 from bfd_vma to unsigned long, because _print_insn_mips
2763         expects an unsigned long, and that might be fewer words of
2764         argument storage (e.g., if bfd_vma is long long on a 32-bit
2765         machine).
2766         (print_insn_big_mips): Likewise with bfd_getb32 value.
2767         (_print_insn_mips): Now static.
2768
2769 Mon Apr 17 12:23:28 1995  Kung Hsu  <kung@rtl.cygnus.com>
2770
2771         * m68k-dis.c: Take out #define BREAK_UP_BIG_DECL kludge, because
2772         gcc memory hog problem with initializer is fixed.
2773
2774 Mon Apr 10 15:55:01 1995  Stan Shebs  <shebs@andros.cygnus.com>
2775
2776         Merge in support for Mac MPW as a host.
2777         (Old change descriptions retained for informational value.)
2778
2779         * mpw-config.in (archname): Compute from the config.
2780         (BFD_MACHINES, ARCHDEFS): Put into mk.tmp.
2781
2782         * mpw-config.in (target_arch): Compute from canonical target.
2783         (m68k, mips, powerpc, sparc): Add architectures.
2784         * mpw-make.in (disassemble.c.o): Add.
2785         (ALL_CFLAGS): Remove special flags (-mc68020 -mc68881 -model far).
2786
2787         * mpw-config.in (BFD_MACHINES): Set to a default value.
2788         * mpw-make.in (BFD_MACHINES): Remove wired-in value.
2789
2790         * mpw-make.in (CSEARCH): Add extra-include to search path.
2791
2792         * mpw-config.in (varargs.h): Don't create.
2793         (sysdep.h): Create using forward-include.
2794         * mpw-make.in (CSEARCH): Add include/mpw to search path.
2795
2796         * mpw-config.in: New file, MPW version of configure.in.
2797         * mpw-make.in: New file, MPW version of Makefile.in.
2798
2799 Fri Mar 31 14:23:38 1995  Ken Raeburn  <raeburn@cujo.cygnus.com>
2800
2801         * alpha-dis.c (print_insn_alpha): Put empty statement after
2802         default label.
2803
2804 Tue Mar 21 10:51:40 1995  Jeff Law  (law@snake.cs.utah.edu)
2805
2806         * hppa-dis.c (sign_extend): Delete, redundant with libhppa.h version.
2807         (low_sign_extend): Likewise.
2808         (get_field): Delete unused function.
2809         (set_field, deposit_14, deposit_21): Likewise.
2810
2811 Fri Mar 17 15:55:53 1995  J.T. Conklin  <jtc@rtl.cygnus.com>
2812
2813         * i386-dis.c: Support for more pentium opcodes.  From Guy Harris
2814           (guy@netapp.com).
2815
2816 Tue Mar 14 00:52:57 1995  Ken Raeburn  (raeburn@kr-pc.cygnus.com)
2817
2818         Sat Feb 11 17:22:41 1995  Klaus Kaempf  (kkaempf@didymus.rmi.de)
2819
2820         * alpha-opc.h (OSF_ASMCODE): define
2821         print pal-code names as defined in App C of the
2822         Alpha Architecture Reference Manual
2823
2824         * alpha-dis.c: cleaned up output
2825         print stylized code forms as defined in App A.4.3 of the
2826         Alpha Architecture Reference Manual
2827
2828 Wed Mar  8 15:21:14 1995  Ian Lance Taylor  <ian@cygnus.com>
2829
2830         * mips-opc.c: Add new mips4 instructions.  Don't set INSN_RFE for
2831         `rfe'.
2832         * mips-dis.c (print_insn_arg): Handle new argument types 'h', 'R',
2833         'N', and 'M'.
2834
2835 Wed Mar  8 02:54:05 1995  Ken Raeburn  <raeburn@cujo.cygnus.com>
2836
2837         * m68k-dis.c (opcode): New function.  Returns address of opcode
2838         table entry given index, even if the opcode table was split to
2839         work around gcc bugs.
2840         (print_insn_m68k): Call opcode instead of referencing m68k_opcodes
2841         directly.
2842         (BREAK_UP_BIG_DECL): Make secondary array static and const.
2843         (reg_names): Now const.
2844         (print_insn_arg): Arrays cacheFieldName and names now const.
2845         (print_indexed): Array scales now const.
2846
2847 Tue Mar  7 16:41:21 1995  Ian Lance Taylor  <ian@cygnus.com>
2848
2849         * ppc-opc.c: Sort recently added instructions by minor opcode
2850         number within major opcode number.
2851
2852 Mon Mar  6 10:04:36 1995  Jeff Law  (law@snake.cs.utah.edu)
2853
2854         * hppa-dis.c: Include libhppa.h.
2855
2856 Fri Feb 24 19:15:36 1995  Ian Lance Taylor  <ian@cygnus.com>
2857
2858         * mips-opc.c: Change dli to use M_DLI, and add dla.
2859
2860 Mon Feb 20 23:54:38 1995  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
2861
2862         * Makefile.in (ALL_MACHINES):  Add w65-dis.o.
2863
2864 Thu Feb 16 17:34:41 1995  Ian Lance Taylor  <ian@cygnus.com>
2865
2866         * mips-opc.c: Add r4650 mul instruction.
2867
2868 Wed Feb 15 15:45:20 1995  Ian Lance Taylor  <ian@cygnus.com>
2869
2870         * mips-opc.c: Add uld and usd macros for unaligned double load and
2871         store.
2872
2873 Tue Feb 14 13:17:37 1995  Michael Meissner  <meissner@tiktok.cygnus.com>
2874
2875         * ppc-opc.c (powerpc_opcodes): Add 403GA opcodes rfci, dccci,
2876         mfdcr, mtdcr, icbt, iccci.
2877
2878 Thu Feb  9 12:28:13 1995  Stan Shebs  <shebs@andros.cygnus.com>
2879
2880         * i960-dis.c (struct tabent, struct sparse_tabent): Change the
2881         signed char fields to shorts, more portable.
2882
2883 Wed Feb  8 17:29:29 1995  Stan Shebs  <shebs@andros.cygnus.com>
2884
2885         * i960-dis.c (struct tabent, struct sparse_tabent): Declare the
2886         char fields as signed chars, since they may have negative values.
2887
2888 Mon Feb  6 10:52:06 1995  J.T. Conklin  <jtc@rtl.cygnus.com>
2889
2890         * i386-dis.c (dis386_twobyte): Add cpuid, From Charles Hannum
2891           (mycroft@netbsd.org).
2892
2893 Mon Jan 30 12:38:00 1995  Ian Lance Taylor  <ian@cygnus.com>
2894
2895         From "Logg, Ed" <elogg@ea.com>:
2896         * ppc-opc.c (extract_bdm): Correct parenthezisation.
2897         * ppc-dis.c (print_insn_powerpc): Print .long before unrecognized
2898         value.
2899
2900 Thu Jan 26 18:32:08 1995  Ian Lance Taylor  <ian@cygnus.com>
2901
2902         * ppc-opc.c: Changes based on patch from David Edelsohn
2903         <edelsohn@mhpcc.edu>.
2904         (powerpc_operands): Add operands SPRBAT and SPRG. Split TBR out of
2905         SPR.
2906         (FXM_MASK): Define.
2907         (insert_tbr): New static function.
2908         (extract_tbr): New static function.
2909         (XFXFXM_MASK, XFXM): Define.
2910         (XSPRBAT_MASK, XSPRG_MASK): Define.
2911         (powerpc_opcodes): Add instructions to access special registers by
2912         name.  Add mtcr and mftbu.
2913
2914 Tue Jan 17 10:56:43 1995  Ian Lance Taylor  <ian@sanguine.cygnus.com>
2915
2916         * mips-opc.c (P3): Define.
2917         (mips_opcodes): Add mad and madu.
2918
2919 Sun Jan 15 16:32:59 1995  Steve Chamberlain  <sac@splat>
2920
2921         * configure.in: Add W65 support.
2922         * disassemble.c: Likewise.
2923         * w65-opc.h, w65-dis.c: New files.
2924
2925 Wed Dec 28 22:15:33 1994  Steve Chamberlain  (sac@jonny.cygnus.com)
2926
2927         * h8300-dis.c (bfd_h8_disassemble): Add support for 2 bit
2928         immediates.
2929
2930 Tue Dec 20 11:25:12 1994  Ian Lance Taylor  <ian@sanguine.cygnus.com>
2931
2932         * mips-opc.c: Add dli as a synonym for li.
2933
2934 Thu Dec  8 18:23:31 1994  Ken Raeburn  <raeburn@cujo.cygnus.com>
2935
2936         * alpha-dis.c (print_insn_alpha): Handle call_pal instruction, and
2937         print something for reserved opcode values, even if it won't
2938         assemble again.
2939
2940         * mips-dis.c (_print_insn_mips): When initializing, shift right
2941         and mask, to avoid sign extension problems on the Alpha.
2942
2943         * m68k-dis.c (print_insn_arg, case 'J'): Handle buscr and pcr
2944         control registers.
2945
2946 Wed Nov 23 22:34:51 1994  Steve Chamberlain  (sac@jonny.cygnus.com)
2947
2948         * sh-opc.h (mov.l gbr): Get direction right.
2949         * sh-dis.c (print_insn_shx): New function.
2950         (print_insn_shl, print_insn_sh): Call print_insn_shx to
2951         print opcodes with right byte order.
2952
2953 Thu Nov  3 19:32:22 1994  Ken Raeburn  <raeburn@cujo.cygnus.com>
2954
2955         * ns32k-dis.c (struct ns32k_option): Renamed from struct option,
2956         to avoid conflicts with getopt.
2957
2958 Mon Oct 31 18:48:10 1994  Ian Lance Taylor  <ian@sanguine.cygnus.com>
2959
2960         * hppa-dis.c (print_insn_hppa): Read the instruction using
2961         bfd_getb32, so that it works on a little endian or 64 bit host.
2962         Remove unused local variable op.
2963
2964 Tue Oct 25 17:07:57 1994  Ian Lance Taylor  <ian@sanguine.cygnus.com>
2965
2966         * mips-opc.c: Use or instead of addu for pseudo-op move, since
2967         addu does not work correctly if -mips3.
2968
2969 Wed Oct 19 13:40:16 1994  Ian Lance Taylor  <ian@sanguine.cygnus.com>
2970
2971         * a29k-dis.c (print_special): Add special register names defined
2972         on 29030, 29040 and 29050.
2973         (print_insn): Handle new operand type 'I'.
2974
2975 Wed Oct 12 11:59:55 1994  Ian Lance Taylor  <ian@sanguine.cygnus.com>
2976
2977         * Makefile.in (INSTALL): Use top level install.sh script.
2978
2979 Wed Oct  5 19:16:29 1994  Ian Lance Taylor  <ian@sanguine.cygnus.com>
2980
2981         * sparc-dis.c: Rewrite to use bitfields, rather than a union, so
2982         that it works on a little endian host.
2983
2984 Tue Oct  4 12:14:21 1994  Ian Lance Taylor  <ian@sanguine.cygnus.com>
2985
2986         * configure.in: Use ${config_shell} when running config.bfd.
2987
2988 Wed Sep 21 18:49:12 1994  Ian Lance Taylor  (ian@sanguine.cygnus.com)
2989
2990         * mips-opc.c (mips_opcodes): "dabs" is only available with -mips3.
2991
2992 Thu Sep 15 16:30:22 1994  Ian Lance Taylor  (ian@sanguine.cygnus.com)
2993
2994         * a29k-dis.c (print_insn): Print the opcode.
2995
2996 Wed Sep 14 17:52:14 1994  Ian Lance Taylor  (ian@sanguine.cygnus.com)
2997
2998         * mips-opc.c (mips_opcodes): Set WR_t for sc and scd.
2999
3000 Sun Sep 11 22:32:17 1994  Jeff Law  (law@snake.cs.utah.edu)
3001
3002         * hppa-dis.c (reg_names): Use r26-r23 for arg0-arg3.
3003
3004 Tue Sep  6 11:37:12 1994  Ian Lance Taylor  (ian@sanguine.cygnus.com)
3005
3006         * mips-opc.c: Set INSN_STORE_MEMORY flag for all instructions
3007         which store a value into memory.
3008
3009 Sun Sep 04 17:58:10 1994  Richard Earnshaw (rwe@pegasus.esprit.ec.org)
3010
3011         * configure.in, Makefile.in, disassemble.c: Add support for the ARM.
3012         * arm-dis.c, arm-opc.h: New files.
3013
3014 Fri Aug  5 14:00:05 1994  Stan Shebs  (shebs@andros.cygnus.com)
3015
3016         * Makefile.in (ns32k-dis.o): Add dependency.
3017         * ns32k-dis.c (print_insn_arg): Declare initialized local as
3018         string, not as array of chars.
3019
3020 Thu Jul 28 18:14:16 1994  Ken Raeburn  (raeburn@cujo.cygnus.com)
3021
3022         * sparc-dis.c (print_insn_sparc): Handle new operand type 'x'.
3023
3024         * sparc-opc.c: Added sparclite extended FP operations, and
3025         versions of v9 impdep* instructions permitting specification of
3026         the OPF field.
3027
3028 Tue Jul 26 16:36:03 1994  Ken Raeburn  (raeburn@cujo.cygnus.com)
3029
3030         * i960-dis.c (reg_names): Now const.
3031         (struct sparse_tabent): New type, copied from array type in mem
3032         function.
3033         (ctrl): Local static array ctrl_tab now const.
3034         (cobr): Local static array cobr_tab now const.
3035         (mem): Local variables reg1, reg2, reg3 now point to const.  Local
3036         static variable mem_tab no longer explicitly initialized.  Changed
3037         mem_init to const array of struct sparse_tabent.
3038         (reg): Local static variable reg_tab no longer explicitly
3039         initialized.  Changed reg_init to const array of struct
3040         sparse_tabent.
3041         (ea): Local static array scale_tab now const.
3042
3043         * i960-dis.c (reg): Added i960JX instructions to reg_init table.
3044         (REG_MAX): Updated.
3045
3046 Tue Jul 19 21:00:00 1994  DJ Delorie (dj@ctron.com)
3047
3048         * configure.bat: the disassember needs to be enabled for
3049         "objdump -d" to work in djgpp.
3050
3051 Wed Jul 13 18:01:58 1994  Ken Raeburn  (raeburn@cujo.cygnus.com)
3052
3053         * ns32k-dis.c: Deleted all code in "#ifdef GDB".
3054         (invalid_float): Enabled general version, doesn't require running
3055         on ns32k host.  Changed to take char* argument, and test for
3056         explicitly specified sizes, instead of using sizeof() on host CPU
3057         types.
3058         (INVALID_FLOAT): Cast first argument.
3059         (opt_u, opt_U, opt_O, opt_C, opt_S, list_P532, list_M532,
3060         list_P032, list_M032): Now const.
3061         (optlist, list_search): Made appropriate arguments now point to
3062         const.
3063         (print_insn_arg): Changed static array of one-character-string
3064         pointers into a static const array of characters; fixed sprintf
3065         statement accordingly.
3066
3067 Sun Jul 10 00:27:47 1994  Ian Dall  (dall@hfrd.dsto.gov.au)
3068
3069         * opcodes/ns32k-dis.c: Semi-new file.  Had apparently been dropped
3070         from distribution. A ns32k-dis.c from a previous distribution has
3071         been brought up to date and supports the new interface.
3072
3073         * disassemble.c: define ARCH_ns32k and add case bfd_arch_ns32k.
3074
3075         * configure.in: add bfd_ns32k_arch target support.
3076
3077         * Makefile.in: add ns32k-dis.o to ALL_MACHINES.
3078         Add ns32k-dis.c to CFILES. Add dependencies for ns32k-dis.o.
3079
3080 Wed Jun 29 22:10:37 1994  Steve Chamberlain  (sac@cygnus.com)
3081
3082         * h8300-dis.c (bfd_h8_disassemble): Get 16bit branch
3083         disassembly right.
3084
3085 Tue Jun 28 13:22:06 1994  Stan Shebs  (shebs@andros.cygnus.com)
3086
3087         * h8300-dis.c, mips-dis.c: Don't use true and false.
3088
3089 Thu Jun 23 12:53:19 1994  David J. Mackenzie  (djm@rtl.cygnus.com)
3090
3091         * configure.in: Change --with-targets to --enable-targets.
3092
3093 Wed Jun 22 13:38:32 1994  Ian Lance Taylor  (ian@sanguine.cygnus.com)
3094
3095         * mips-dis.c (_print_insn_mips): Build a static hash table mapping
3096         opcodes to the first instruction with that opcode, to speed
3097         disassembly of large files.  From ralphc@pyramid.com (Ralph
3098         Campbell).
3099
3100 Tue Jun  7 12:49:44 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
3101
3102         * Makefile.in (mostlyclean): Fix typo (was mostyclean).
3103
3104 Wed May 11 22:32:00 1994  DJ Delorie (dj@ctron.com)
3105
3106         * configure.bat: update to latest makefile.in
3107
3108 Sat May  7 17:13:21 1994  Steve Chamberlain  (sac@cygnus.com)
3109
3110         * a29k-dis.c (print_insn): Print 'x' type operand in hex.
3111         * h8300-dis.c (bfd_h8_disassemble): Print 16bit rels correctly.
3112         * sh-dis.c (print_insn_sh): Don't recur endlessly if delay
3113         slot insn is in a delay slot.
3114         * z8k-opc.h: (resflg): Fix patterns.
3115         * h8500-opc.h Fix CR insn patterns.
3116
3117 Fri May  6 14:34:46 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
3118
3119         * ppc-opc.c (powerpc_opcodes): Put PowerPC versions of "cmp" and
3120         "cmpl" before POWER versions, so that gas -many uses them.
3121
3122 Thu Apr 28 18:32:36 1994  Ken Raeburn  (raeburn@cujo.cygnus.com)
3123
3124         * disassemble.c: New file.
3125         * Makefile.in (OFILES): Add disassemble.o.
3126         (disassemble.o): Provide dependencies; compile with $(ARCHDEFS).
3127         * configure.in: Define ARCHDEFS in Makefile.  Code taken from
3128         binutils/configure.in.
3129
3130         * m68k-dis.c (print_insn_m68k): If F_ALIAS flag is set, skip the
3131         opcode being examined.
3132
3133 Thu Apr 21 17:08:40 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
3134
3135         * ppc-opc.c (powerpc_operands): Added RAL, RAM and RAS.
3136         (insert_ral, insert_ram, insert_ras): New functions.
3137         (powerpc_opcodes): Use RAL for load with update, RAM for lmw, and
3138         RAS for store with update.
3139
3140 Sat Apr 16 23:41:44 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
3141
3142         * ppc-opc.c (powerpc_opcodes): Correct fcir.  From David Edelsohn
3143         (edelsohn@npac.syr.edu).
3144
3145 Wed Apr  6 17:11:45 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
3146
3147         * mips-opc.c (mips_opcodes): Correct operands of "nor" with an
3148         immediate argument.
3149
3150 Mon Apr  4 16:30:46 1994  Doug Evans  (dje@canuck.cygnus.com)
3151
3152         * sparc-opc.c (sparc_opcodes): Fix "rd %fprs,%l0".
3153
3154 Mon Apr  4 13:22:00 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
3155
3156         * ppc-opc.c (powerpc_operands): The signedp field has been
3157         removed, so don't initialize it.  Set the PPC_OPERAND_SIGNED flag
3158         instead.  Add new operand SISIGNOPT.
3159         (powerpc_opcodes): For lis, liu, addis, and cau use SISIGNOPT.
3160         Based on patch from David Edelsohn (edelsohn@npac.syr.edu).
3161         * ppc-dis.c (print_insn_powerpc): Check PPC_OPERAND_SIGNED rather
3162         than signedp field.
3163
3164 Wed Mar 30 00:31:49 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
3165
3166         * i386-dis.c (struct private):  Renamed to dis_private. `private'
3167         is a reserved word for dynix cc.
3168
3169 Mon Mar 28 13:00:15 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
3170
3171         * configure.in: Change error message to refer to bfd/config.bfd
3172         rather than bfd/configure.in.
3173
3174 Mon Mar 28 12:28:30 1994  David Edelsohn  (edelsohn@npac.syr.edu)
3175
3176         * ppc-opc.c: Define POWER2 as short alias flag.
3177         (powerpc_opcodes): Add POWER/2 opcodes lfq*, stfq*, fcir[z], and
3178         fsqrt.
3179
3180 Wed Mar 23 12:23:05 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
3181
3182         * i960-dis.c (print_insn_i960): Don't read a second word for
3183         opcodes 0, 1, 2 and 3.
3184
3185 Wed Mar 16 15:37:58 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
3186
3187         * configure.in: Don't build m68881-ext.o for bfd_m68k_arch.
3188
3189 Mon Mar 14 14:53:50 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
3190
3191         * m68881-ext.c: Removed; no longer used.
3192         * Makefile.in: Changed accordingly.
3193
3194         * m68k-dis.c (ext_format_68881): Don't declare.
3195         (print_insn_m68k): If an instruction uses place 'i', it uses at
3196         least four fixed bytes.
3197         (print_insn_arg): Don't bump p by 2 for case 'I', place 'i'.  For
3198         extended float, convert to double using floatformat_to_double, not
3199         ieee_extended_to_double, and fetch the data before converting it.
3200
3201 Tue Mar  8 18:12:25 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
3202
3203         * mips-opc.c: It's sqrt.s, not sqrt.w.  From
3204         davidj@ICSI.Berkeley.EDU (David Johnson).
3205
3206 Tue Feb  8 16:55:27 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
3207
3208         * ppc-opc.c (powerpc_opcodes): The POWER uses bdn[l][a] where the
3209         PowerPC uses bdnz[l][a].
3210
3211 Tue Feb  8 00:32:28 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
3212
3213         * dis-buf.c, i386-dis.c:  Include sysdep.h.
3214
3215 Mon Feb  7 19:22:23 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
3216
3217         * configure.in (bfd_powerpc_arch): Use ppc-dis.o and ppc-opc.o.
3218
3219         * ppc-opc.c (powerpc_opcodes): Mark POWER instructions supported
3220         by Motorola PowerPC 601 with PPC_OPCODE_601.
3221         * ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc):
3222         Disassemble Motorola PowerPC 601 instructions as well as normal
3223         PowerPC instructions.
3224
3225 Sun Feb  6 07:45:17 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
3226
3227         * i960-dis.c (reg, mem): Just use a static array instead of
3228         calling xmalloc.
3229
3230 Sat Feb  5 00:04:02 1994  Jeffrey A. Law  (law@snake.cs.utah.edu)
3231
3232         * hppa-dis.c (print_insn_hppa): For '?' and '@' only adjust the
3233         condition name index if this is for a negated condition.
3234
3235         * hppa-dis.c (print_insn_hppa): No space before 'H' operand.
3236         Floating point format for 'H' operand is backwards from normal
3237         case (0 == double, 1 == single).  For '4', '6', '7', '9', and '8'
3238         operands (fmpyadd and fmpysub), handle bizarre register
3239         translation correctly for single precision format.
3240
3241         * hppa-dis.c (print_insn_hppa): Do not emit a space after 'F'
3242         or 'I' operands if the next format specifier is 'M' (fcmp
3243         condition completer).
3244
3245 Feb  4 23:38:03 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
3246
3247         * ppc-opc.c (powerpc_operands): New operand type MBE to handle a
3248         single number giving a bitmask for the MB and ME fields of an M
3249         form instruction.  Change NB to accept 32, and turn it into 0;
3250         also turn 0 into 32 when disassembling.  Seperated SH from NB.
3251         (insert_mbe, extract_mbe): New functions.
3252         (insert_nb, extract_nb): New functions.
3253         (SC_MASK): Mask out SA and LK bits.
3254         (powerpc_opcodes): Change "cal" to use RT, D, RA rather than RT,
3255         RA, SI.  Change "liu" and "cau" to use UI rather than SI.  Mark
3256         "bctr" and "bctrl" as accepted by POWER.  Change "rlwimi",
3257         "rlimi", "rlwimi.", "rlimi.", "rlwinm", "rlinm", "rlwinm.",
3258         "rlinm.", "rlmi", "rlmi.", "rlwnm", "rlnm", "rlwnm.", "rlnm." to
3259         use MBE rather than MB.  Add "mfmq" and "mtmq" POWER instructions.
3260         (powerpc_macros): Define table of macro definitions.
3261         (powerpc_num_macros): Define.
3262
3263         * ppc-dis.c (print_insn_powerpc): Don't skip optional operands
3264         if PPC_OPERAND_NEXT is set.
3265
3266 Sat Jan 22 23:10:07 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
3267
3268         * i960-dis.c (print_insn_i960): Make buffer bfd_byte instead of
3269         char.  Retrieve contents using bfd_getl32 instead of shifting.
3270
3271 Fri Jan 21 19:01:39 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
3272
3273         * ppc-opc.c: New file.  Opcode table for PowerPC, including
3274         opcodes for POWER (RS/6000).
3275         * ppc-dis.c: New file.  PowerPC and Power (RS/6000) disassembler.
3276         * Makefile.in (ALL_MACHINES): Add ppc-dis.o and ppc-opc.o.
3277         (CFILES): Add ppc-dis.c.
3278         (ppc-dis.o, ppc-opc.o): New targets.
3279         * configure.in: Build ppc-dis.o and ppc-opc.o for bfd_rs6000_arch.
3280
3281 Mon Jan 17 20:05:49 1994  Jeffrey A. Law  (law@snake.cs.utah.edu)
3282
3283         * hppa-dis.c (print_insn_hppa): Handle 'N' in assembler template.
3284         No space before 'u', 'f', or 'N'.
3285
3286 Sun Jan 16 14:20:16 1994  Jim Kingdon  (kingdon@deneb.cygnus.com)
3287
3288         * i386-dis.c (print_insn_i386): Add FIXME comment regarding reading
3289         farther than we should.
3290
3291         * i386-dis.c (dis386): Use Yb and Yv for scasb and scasS.
3292
3293 Thu Jan  6 12:38:05 1994  David J. Mackenzie  (djm@thepub.cygnus.com)
3294
3295         * sparc-dis.c m68k-dis.c alpha-dis.c a29k-dis.c: Fix comments.
3296
3297 Wed Jan  5 11:56:21 1994  David J. Mackenzie  (djm@thepub.cygnus.com)
3298
3299         * i960-dis.c (print_insn_i960): Only read word2 if the instruction
3300         needs it, to prevent reading past the end of a section.
3301
3302 Wed Nov 17 17:20:12 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
3303
3304         * mips-opc.h: Use macro for j instruction, to support SVR4 PIC.
3305         Removed t,A case for la; always use t,A(b) case.
3306
3307 Mon Nov  8 12:37:36 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
3308
3309         From Ted Lemen <mellon@pepper.ncd.com>
3310         * mips-dis.c (print_insn_arg): Handle 'k'.
3311         * mips-opc.c: Make cache use k, not t.
3312
3313 Sun Nov  7 23:52:34 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
3314
3315         * alpha-opc.h, alpha-dis.c (print_insn_alpha):  Add
3316         FLOAT_MEMORY_FORMAT_CODE, FLOAT_BRANCH_FORMAT_CODE, correct
3317         FLOAT_FORMAT_CODE to put out floating point register names.
3318
3319 Mon Nov  1 18:17:51 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
3320
3321         * mips-opc.c: Use macros for jal variants, to support SVR4 PIC.
3322
3323 Thu Oct 28 17:42:23 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
3324
3325         * a29k-dis.c (print_insn): Use 0x%08x, not 0x%8x.
3326
3327 Wed Oct 27 11:48:01 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
3328
3329         * mips-opc.c (dsll, dsra, dsrl): Added '>' cases for shift counts
3330         larger than 32.  Moved dsxx32 variants first for disassembler.
3331
3332 Mon Oct 25 11:33:14 1993  Steve Chamberlain  (sac@phydeaux.cygnus.com)
3333
3334         * z8kgen.c, z8k-opc.h: Add full lda information.
3335
3336 Tue Oct 19 12:39:25 1993  Jeffrey A Law  (law@cs.utah.edu)
3337
3338         * hppa-dis.c (print_insn_hppa): Do not emit a space after
3339         movb instructions.  Any necessary space will be emitted by
3340         the code to handle nullification completers.
3341
3342 Wed Oct 13 16:19:07 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
3343
3344         * mips-opc.c: Moved l.d down so that it disassembles as ldc1.
3345
3346 Fri Oct  8 02:34:21 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
3347
3348         * alpha-opc.h:  Add ldl_l, fix typo for ldq_u.
3349         * alpha-dis.c (print_insn_alpha):  Add code for PAL_FORMAT_CODE.
3350
3351 Tue Oct  5 17:47:53 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
3352
3353         * mips-opc.c: Correct lwu opcode value (book had it wrong).
3354
3355 Thu Sep 30 11:26:18 1993  Steve Chamberlain  (sac@phydeaux.cygnus.com)
3356
3357         * z8k-dis.c (FETCH_DATA): get just the right amount of data.
3358         (unpack_instr): Cope with ARG_IMM4M1 type instructions.
3359
3360 Wed Sep 29 16:24:49 1993  K. Richard Pixley  (rich@sendai.cygnus.com)
3361
3362         * m88k-dis.c (m88kdis): comment change.  Remove space after
3363           printing mnemonic.
3364           (printop): handle new arg types DEC and XREG for m88110.
3365
3366 Tue Sep 28 19:20:16 1993  Jeffrey A Law (law@snake.cs.utah.edu)
3367
3368         * hppa-dis.c (print_insn_hppa): Handle 'z' operand
3369         type for absolute branch addresses.  Delete special
3370         "ble" and "be" code in 'W' operand code.
3371
3372 Fri Sep 24 14:08:33 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
3373
3374         * mips-opc.c: Set hazard information correctly for branch
3375         likely instructions.
3376
3377 Fri Sep 17 04:41:17 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
3378
3379         * alpha-dis.c (print_insn_alpha), alpha-opc.h:  Fix bugs, use
3380         info->fprintf_func for printing and info->print_address_func for
3381         address output.
3382
3383 Wed Sep 15 12:12:07 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
3384
3385         * mips-opc.c: Set INSN_TRAP for tXX instructions.
3386
3387 Thu Sep  9 10:11:27 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
3388
3389         * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson):
3390         Corrected second case of "b" for disassembler.
3391
3392 Tue Sep  7 14:25:15 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
3393
3394         * mips-dis.c, m88k-dis.c: Don't include libbfd.h.  Changed calls
3395         to BFD swapping routines to correspond to BFD name changes.
3396
3397 Thu Sep  2 10:35:25 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
3398
3399         * mips-opc.c: Change div machine instruction to be z,s,t rather
3400         than s,t.  Change div macro to be d,v,t rather than d,s,t.
3401         Likewise for divu, ddiv, ddivu.  Added z,s,t case for drem, dremu,
3402         rem and remu which generates only the corresponding div
3403         instruction.  This is for compatibility with the MIPS assembler,
3404         which only generates the simple machine instruction when an
3405         explicit destination of $0 is used.
3406         * mips-dis.c (print_insn_arg): Handle 'z' (always register zero).
3407
3408 Thu Aug 26 17:41:44 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
3409
3410         * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Set
3411         WR_31 hazard for bal, bgezal, bltzal.
3412
3413 Thu Aug 26 17:20:02 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
3414
3415         * hppa-dis.c (print_insn_hppa): Use print function
3416         from within the disassemble_info, not fprintf_filtered.
3417
3418 Wed Aug 25 13:51:40 1993  Ken Raeburn  (raeburn@cambridge.cygnus.com)
3419
3420         * hppa-dis.c (print_insn_hppa): Handle '|' like '>'.  (From Jeff
3421         Law, law@cs.utah.edu.)
3422
3423 Mon Aug 23 12:44:05 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
3424
3425         * mips-opc.c ("absu"): Removed.
3426         ("dabs"): Added.
3427
3428 Fri Aug 20 10:52:52 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
3429
3430         * mips-opc.c: Added r6000 and r4000 instructions and macros.
3431         Changed hazard information to distinguish between memory load
3432         delays and coprocessor load delays.
3433
3434 Wed Aug 18 15:39:23 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
3435
3436         * mips-opc.c: li.d uses "T,L", not "S,F".  Added li.s.
3437
3438 Tue Aug 17 09:44:42 1993  David J. Mackenzie  (djm@thepub.cygnus.com)
3439
3440         * configure.in: Don't pass cpu to config.bfd.
3441
3442 Tue Aug 17 12:23:52 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
3443
3444         * m88k-dis.c (m88kdis): Make class unsigned.
3445
3446 Thu Aug 12 15:08:18 1993  Ian Lance Taylor  (ian@cygnus.com)
3447
3448         * alpha-dis.c (print_insn_alpha): One branch format case was
3449         missing the instruction name.
3450
3451 Wed Aug 11 19:29:39 1993  David J. Mackenzie  (djm@thepub.cygnus.com)
3452
3453         * Makefile.in (ALL_MACHINES): Renamed from DIS_LIBS.
3454         Add the arch-specific auxiliary files.
3455         (OFILES): Remove the arch-specific auxiliary files
3456         and use BFD_MACHINES instead of DIS_LIBS.
3457         * configure.in: Set BFD_MACHINES based on --with-targets option.
3458
3459 Thu Aug 12 12:04:53 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
3460
3461         * mips-opc.c: Added lwc1 E,A(b) to go with lwc1 T,A(b).  Similarly
3462         for swc1.
3463
3464 Sun Aug  8 15:09:30 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
3465
3466         * sparc-opc.c: Change CONST to const to deal with gcc
3467         -Dconst=__const -traditional.
3468
3469 Fri Aug  6 10:58:55 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
3470
3471         * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Took
3472         coprocessor instructions out of #if 0, and made them use new
3473         argument type "C".
3474
3475 Thu Aug  5 17:11:06 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
3476
3477         * sparc-dis.c: Include ansidecl.h before opcodes/sparc.h.
3478
3479 Fri Jul 30 18:48:15 1993  John Gilmore  (gnu@cygnus.com)
3480
3481         * sparc-opc.c:  Add F_JSR, F_UNBR, or F_CONDBR flags to each branch
3482         instruction, for use by the disassembler.
3483
3484         * sparc-dis.c (SEX):  Add sign extension macro.  Replace many
3485         hand-coded sign extensions that depended on 32-bit host ints.
3486         FIXME, we still depend on big-endian host bitfield ordering.
3487         (sparc_print_insn):  Set the insn_info_valid field, and the
3488         other fields that describe the instruction being printed.
3489
3490 Tue Jul 27 17:04:58 1993  Jim Wilson  (wilson@sphagnum.cygnus.com)
3491
3492         * sparc-opc.c (call): Accept all 6 addressing modes valid for
3493         `jmp' instead of just one of them.
3494
3495 Wed Jul 21 11:43:32 1993  Jim Kingdon  (kingdon@deneb.cygnus.com)
3496
3497         * hppa-dis.c: Move floating registers from reg_names to fp_reg_names.
3498         (fput_fp_reg_r): Renamed from fput_reg_r.
3499         (fput_fp_reg): New function.
3500         (print_insn_hppa): Use fput_fp_reg{,_r} where appropriate.
3501
3502         * hppa-dis.c (print_insn_hppa, cases 'a', 'd'): Print space afterwards.
3503
3504         * hppa-dis.c (print_insn_hppa, case 'd'): Use GET_COND not GET_FIELD.
3505
3506 Mon Jul 19 13:52:21 1993  Jim Kingdon  (kingdon@deneb.cygnus.com)
3507
3508         * hppa-dis.c (print_insn_hppa): Use extract_5r_store for 'r'.
3509
3510         * hppa-dis.c (print_insn_hppa, case '>'): If next character is 'n',
3511         don't output a space.
3512
3513         * hppa-dis.c (float_format_names): 10 is undefined, and 11 is quad.
3514
3515 Sun Jul 18 16:30:02 1993  Jim Kingdon  (kingdon@rtl.cygnus.com)
3516
3517         * mips-opc.c: New file, containing opcode table from
3518         ../include/opcode/mips.h.
3519         * Makefile.in: Add it.
3520
3521 Thu Jul 15 12:37:05 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
3522
3523         * m88k-dis.c: New file, moved in from gdb and changed to use the
3524         new dis-asm.h disassembler interface.
3525         * Makefile.in (DIS_LIBS): Added m88k-dis.o.
3526         (m88k-dis.o): New target.
3527
3528 Tue Jul 13 10:04:16 1993  Ian Lance Taylor  (ian@cygnus.com)
3529
3530         * mips-dis.c (print_insn_arg, _print_insn_mips): Made pointer to
3531         argument string const char * to correspond to opcode/mips.h.
3532
3533 Tue Jul  6 15:18:37 1993  Ian Lance Taylor  (ian@cygnus.com)
3534
3535         * mips-dis.c: Updated to account for name changes in new version
3536         of opcode/mips.h.
3537         * Makefile.in: Added header file dependencies.
3538
3539 Sat Jul  3 23:47:56 1993  Doug Evans  (dje@canuck.cygnus.com)
3540
3541         * h8300-dis.c (bfd_h8_disassemble): Correct fetching of instruction.
3542
3543 Thu Jul  1 12:23:38 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
3544
3545         * m68k-dis.c (NEXTWORD, NEXTLONG): Use ((x) ^ 0x8000) - 0x8000 to sign
3546         extend, rather than shifts.
3547
3548 Sun Jun 20 20:56:56 1993  Ken Raeburn  (raeburn@poseidon.cygnus.com)
3549
3550         * Makefile.in: Undo 15 June change.
3551
3552 Fri Jun 18 14:15:15 1993  Per Bothner  (bothner@deneb.cygnus.com)
3553
3554         * m68k-dis.c (print_insn_arg):  Change return value to byte count
3555         or error code.
3556         * m68k-dis.c:  Re-write to detect invalid operands before
3557         printing anything, so we can handle this the same way we
3558         handle invalid opcodes.
3559
3560 Thu Jun 17 15:01:36 1993  Steve Chamberlain  (sac@phydeaux.cygnus.com)
3561
3562         * sh-dis.c, sh-opc.h: Understand some more opcodes.
3563
3564 Wed Jun 16 13:48:05 1993  Ian Lance Taylor  (ian@cygnus.com)
3565
3566         * hppa-dis.c: Include <ansidecl.h> and sysdep.h before other
3567         header files.
3568
3569 Tue Jun 15 21:45:26 1993  Ken Raeburn  (raeburn@cambridge.cygnus.com)
3570
3571         * sparc-dis.c: Don't declare qsort, since sysdep.h might.
3572
3573         * configure.in: Do make sysdep.h link.
3574         * Makefile.in: Search ../include.  Don't search ../bfd.
3575
3576 Tue Jun 15 13:36:10 1993  Stu Grossman  (grossman@cygnus.com)
3577
3578         Changes from Jeff Law, law@cs.utah.edu:
3579         * hppa-dis.c: Fix typo.  'a' and 'd' were reversed.
3580         Do not print a space before the completers specified by
3581         'a' and 'd'.
3582
3583 Fri Jun 11 18:40:21 1993  Ken Raeburn  (raeburn@cygnus.com)
3584
3585         * mips-dis.c: No longer need to bomb out if HOST_64_BIT is
3586         defined, since gdb has been fixed.
3587
3588         Changes from Jeff Law, law@cs.utah.edu:
3589         * hppa-dis.c (print_insn_hppa): Last argument to fput_reg,
3590         fput_reg_r, fput_creg, fput_const, and fputs_filtered should
3591         be a *disassemble_info, not a *FILE.
3592         * hppa-dis.c: Support 'd', '!', and 'a'.
3593         * hppa-dis.c: Support 's' to extract a 2 bit space register.
3594         * hppa-dis.c: Delete cases which are no longer needed.
3595
3596 Fri Jun 11 07:53:48 1993  Jim Kingdon  (kingdon@cygnus.com)
3597
3598         * m68k-dis.c (print_insn_{m68k,arg}): Add MMU codes.
3599
3600 Tue Jun  8 12:25:01 1993  Steve Chamberlain  (sac@phydeaux.cygnus.com)
3601
3602         * h8300-dis.c: New file, removed from bfd/cpu-h8300.c, with
3603         H8/300-H opcodes.
3604
3605 Mon Jun  7 12:58:49 1993  Per Bothner  (bothner@rtl.cygnus.com)
3606
3607         * Makefile.in (CSEARCH): Add -I../bfd for sysdep.h and bfd.h.
3608         * configure.in:  No longer need to configure to get sysdep.h.
3609
3610 Thu Jun  3 15:56:49 1993  Stu Grossman  (grossman@cygnus.com)
3611
3612         * Patches from Jeffrey Law <law@cs.utah.edu>.
3613         * hppa-dis.c: Support 'I', 'J', and 'K' in output
3614         templates for 1.1 FP computational instructions.
3615
3616 Tue May 25 13:05:48 1993  Ken Raeburn  (raeburn@cambridge.cygnus.com)
3617
3618         * h8500-dis.c (print_insn_h8500): Address argument is type
3619         bfd_vma.
3620         * z8k-dis.c (print_insn_z8k, print_insn_z8001, print_insn_z8002):
3621         Ditto.
3622
3623         * h8500-opc.h (addr_class_type): No comma at end of enumerator.
3624         * sh-opc.h (sh_nibble_type, sh_arg_type): Ditto.
3625
3626         * sparc-dis.c (compare_opcodes): Move static declaration to
3627         top-level.
3628
3629 Fri May 21 14:17:37 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
3630
3631         * sparc-dis.c (print_insn_sparc): Implement 'n' argument for unimp
3632         instruction, remove unimp hack from 'l' argument.
3633
3634 Wed May 19 15:35:54 1993  Stu Grossman  (grossman@cygnus.com)
3635
3636         * z8k-dis.c (fetch_data):  Use unsigned char to make ancient gcc's
3637         happy.
3638
3639 Fri May 14 15:22:46 1993  Ian Lance Taylor  (ian@cygnus.com)
3640
3641         * Based on patches from davidj@ICSI.Berkeley.EDU (David Johnson):
3642         * mips-dis.c (print_insn_arg): Handle 'C' for general coprocessor
3643         instructions.
3644
3645 Fri May 14 00:09:14 1993  Ken Raeburn  (raeburn@cambridge.cygnus.com)
3646
3647         * hppa-dis.c: Include dis-asm.h before sysdep.h.  Changed some
3648         arrays of string pointers to 2-d arrays of chars, to save
3649         space.
3650
3651 Thu May  6 20:51:17 1993  Fred Fish  (fnf@cygnus.com)
3652
3653         * a29k-dis.c, alpha-dis.c, i960-dis.c, sparc-dis.c, z8k-dis.c:
3654         Cast second arg to read_memory_func to "bfd_byte *", as necessary.
3655
3656 Tue May  4 20:31:10 1993  Ken Raeburn  (raeburn@cambridge.cygnus.com)
3657
3658         * hppa-dis.c: New file from Utah, adapted to new disassembler
3659         calling interface.
3660         * Makefile.in: Include it.
3661
3662 Mon Apr 26 18:17:42 1993  Steve Chamberlain  (sac@thepub.cygnus.com)
3663
3664         * sh-dis.c, sh-opc.h: New files.
3665
3666 Fri Apr 23 18:51:22 1993  Steve Chamberlain  (sac@thepub.cygnus.com)
3667
3668         * alpha-dis.c, alpha-opc.h: New files.
3669
3670 Tue Apr  6 12:54:08 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
3671
3672         * mips-dis.c: Sign extend 'j' and 'b' arguments, delta is a signed
3673         value.
3674
3675 Mon Apr  5 17:37:37 1993  John Gilmore  (gnu@cygnus.com)
3676
3677         * sparc-dis.c: Make "ta" the default trap instruction, "t" the alias.
3678
3679 Fri Apr  2 07:24:27 1993  Ian Lance Taylor  (ian@cygnus.com)
3680
3681         * a29k-dis.c, sparc-dis.c, sparc-opc.c: Use CONST rather than
3682         const.
3683
3684 Thu Apr  1 11:20:43 1993  Jim Kingdon  (kingdon@cygnus.com)
3685
3686         * sparc-dis.c: Use fprintf_func a few places where I forgot,
3687         and double percent signs a few places.
3688
3689         * a29k-dis.c, i960-dis.c: New, merged from gdb and binutils.
3690
3691         * i386-dis.c, m68k-dis.c, mips-dis.c, sparc-dis.c:
3692         Use info->print_address_func not print_address.
3693
3694         * dis-buf.c (generic_print_address): New function.
3695
3696 Wed Mar 31 10:07:04 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
3697
3698         * Makefile.in: Add sparc-dis.c.
3699         sparc-dis.c: New file, merges binutils and gdb versions as follows:
3700         From GDB:
3701             Add `add' instruction to the set that get checked
3702             for a preceding `sethi' in order to print an absolute address.
3703             * (print_insn):  Disassembly prefers real instructions.
3704             (is_delayed_branch):  Speed up.
3705             * sparc-opcode.h: Add ALIAS bit to aliases.  Fix up opcode tables.
3706             Still missing some float ops, and needs testing.
3707             * sparc-pinsn.c (print_insn): Eliminate 'set' test, subsumed by
3708             F_ALIAS.  Use printf, not fprintf, when not passing a file
3709             pointer...
3710             (compare_opcodes): Check that identical instructions have
3711             identical opcodes, complain otherwise.
3712         From binutils:
3713             * New 'm' arg.
3714             * Include reg_names.
3715         From neither:
3716             Use dis-asm.h/read_memory_func interface.
3717
3718 Wed Mar 31 20:49:06 1993  K. Richard Pixley  (rich@rtl.cygnus.com)
3719
3720         * h8500-dis.c, i386-dis.c, m68k-dis.c, z8k-dis.c (fetch_data):
3721           deliberately return non-zero to setjmp from longjmp.  Otherwise
3722           this code fails to compile.
3723
3724 Wed Mar 31 17:04:31 1993  Stu Grossman  (grossman@cygnus.com)
3725
3726         * m68k-dis.c:  Fix prototype for fetch_arg().
3727
3728 Wed Mar 31 10:07:04 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
3729
3730         * dis-buf.c: New file, for new read_memory_func interface.
3731         Makefile.in (OFILES): Include it.
3732         m68k-dis.c, i386-dis.c, h8500-dis.c, mips-dis.c, z8k-dis.c:
3733         Use new read_memory_func interface.
3734
3735 Mon Mar 29 14:02:17 1993  Steve Chamberlain  (sac@thepub.cygnus.com)
3736
3737         * h8500-dis.c (print_insn_h8500): Get sign of fp offsets right.
3738         * h8500-opc.h: Fix couple of opcodes.
3739
3740 Wed Mar 24 02:03:36 1993  david d `zoo' zuhn  (zoo at poseidon.cygnus.com)
3741
3742         * Makefile.in: add dvi & installcheck targets
3743
3744 Mon Mar 22 18:55:04 1993  John Gilmore  (gnu@cygnus.com)
3745
3746         * Makefile.in:  Update for h8500-dis.c.
3747
3748 Fri Mar 19 14:27:17 1993  Steve Chamberlain  (sac@thepub.cygnus.com)
3749
3750         * h8500-dis.c, h8500-opc.h: New files
3751
3752 Thu Mar 18 14:12:37 1993  Per Bothner  (bothner@rtl.cygnus.com)
3753
3754         * mips-dis.c, z8k-dis.c:  Converted to use interface defined in
3755         ../include/dis-asm.h.
3756         * m68k-dis.c:  New file (merge of ../binutils/m68k-pinsn.c
3757         and ../gdb/m68k-pinsn.c).
3758         * i386-dis.c:  New file (merge of ../binutils/i386-pinsn.c
3759         and ../gdb/i386-pinsn.c).
3760         * m68881-ext.c:  New file.  Moved definition of
3761         ext_format ext_format_68881 from ../gdb/m68k-tdep.c.
3762         * Makefile.in:  Adjust for new files.
3763         * i386-dis.c:  Patches from John Hassey (hassey@dg-rtp.dg.com).
3764         * m68k-dis.c:  Recognize '9' placement code, so (say) pflush
3765         can be dis-assembled.
3766
3767 Wed Feb 17 09:19:47 1993  Ken Raeburn  (raeburn@cambridge.cygnus.com)
3768
3769         * mips-dis.c (print_insn_arg): Now returns void.
3770
3771 Mon Jan 11 16:09:16 1993  Fred Fish  (fnf@cygnus.com)
3772
3773         * mips-dis.c (ansidecl.h):  Include for benefit of sysdep.h
3774         files that use the macros.
3775
3776 Thu Jan  7 13:15:17 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
3777
3778         * mips-dis.c: New file, from gdb/mips-pinsn.c.
3779         * Makefile.in (DIS_LIBS): Added mips-dis.o.
3780         (CFILES): Added mips-dis.c.
3781
3782 Thu Jan  7 07:36:33 1993  Steve Chamberlain  (sac@thepub.cygnus.com)
3783
3784         * z8k-dis.c (print_insn_z8001, print_insn_z8002): new routines
3785         * z8kgen.c, z8k-opc.h: fix sizes of some shifts.
3786
3787 Tue Dec 22 15:42:44 1992  Per Bothner  (bothner@rtl.cygnus.com)
3788
3789         * Makefile.in:  Improve *clean rules.
3790         * configure.in:  Allow a default host.
3791
3792 Tue Nov 17 19:53:54 1992  david d `zoo' zuhn  (zoo at cirdan.cygnus.com)
3793
3794         * Makefile.in: also use -I$(srcdir)/../bfd, since some sysdep
3795         files include other sysdep files
3796
3797 Thu Nov 12 16:10:37 1992  Steve Chamberlain  (sac@thepub.cygnus.com)
3798
3799         * z8k-dis.c z8k-opc.h z8kgen.c: checkpoint
3800
3801 Fri Oct  9 04:56:05 1992  John Gilmore  (gnu@cygnus.com)
3802
3803         * configure.in:  For host support, use ../bfd/configure.host
3804         so it stays in sync with the ../bfd/hosts database.
3805
3806 Thu Oct  1 23:38:54 1992  david d `zoo' zuhn  (zoo at cirdan.cygnus.com)
3807
3808         * configure.in: use cpu-vendor-os triple instead of nested cases
3809
3810 Wed Sep 30 16:09:20 1992  Michael Werner  (mtw@cygnus.com)
3811
3812         * z8k-dis.c (unparse_instr): fix bug where opcode returned was
3813         *always* the wrong one.
3814
3815 Wed Sep 30 07:42:17 1992  Steve Chamberlain  (sac@thepub.cygnus.com)
3816
3817         * z8kgen.c: added copyright info
3818
3819 Tue Sep 29 12:20:21 1992  Steve Chamberlain  (sac@thepub.cygnus.com)
3820
3821         * z8k-dis.c (unparse_instr): prettier tabs
3822         * z8kgen.c -> z8k-opc.h: bug fixes in tables
3823
3824 Fri Sep 25 12:50:32 1992  Stu Grossman  (grossman at cygnus.com)
3825
3826         * configure.in:  Add ncr* configuration.
3827         * z8k-dis.c (struct instr_data_s):  Make instr_asmsrc char to make
3828         picayune ANSI compilers happy.
3829
3830 Sep 20 08:50:55 1992  Fred Fish  (fnf@cygnus.com)
3831
3832         * configure.in (i386):  Make i386 and i486 synonymous for now.
3833         * configure.in (i[34]86-*-sysv4):  Add my_host definition.
3834
3835 Fri Sep 18 17:01:23 1992  Ken Raeburn  (raeburn@cambridge.cygnus.com)
3836
3837         * Makefile.in (install): Fix typo.
3838
3839 Fri Sep 18 02:04:24 1992  John Gilmore  (gnu@cygnus.com)
3840
3841         * Makefile.in (make):  Remove obsolete crud.
3842         (sparc-opc.o):  Avoid Sun Make VPATH bug.
3843
3844 Tue Sep  8 17:29:27 1992  K. Richard Pixley  (rich@sendai.cygnus.com)
3845
3846         * Makefile.in: since there are no SUBDIRS, remove rule and
3847         references of subdir_do.
3848
3849 Tue Sep  8 17:02:58 1992  Ken Raeburn  (raeburn@cambridge.cygnus.com)
3850
3851         * Makefile.in (install): Get the library name right here too.
3852         Don't install bfd.h, since it's unrelated to this library.  No
3853         subdirs to recurse into, either.
3854         (CFILES): The source file has a .c suffix, not .o.
3855
3856         * sparc-opc.c: New file, moved from BFD.
3857         * Makefile.in (OFILES): Build it.
3858
3859 Thu Sep  3 16:59:20 1992  Michael Werner  (mtw@cygnus.com)
3860
3861         * z8k-dis.c: fixed forward refferences of some declarations.
3862
3863 Mon Aug 31 16:09:45 1992  Michael Werner  (mtw@cygnus.com)
3864
3865         * Makefile.in: get the name of the library right
3866
3867 Mon Aug 31 13:47:35 1992  Steve Chamberlain  (sac@thepub.cygnus.com)
3868
3869         * z8k-dis.c: knows how to disassemble z8k stuff
3870         * z8k-opc.h: new file full of z8000 opcodes
3871
3872 \f
3873 Local Variables:
3874 version-control: never
3875 End: