2 Tue Oct 13 12:47:42 EDT 1998 Frank Ch. Eigler <fche@cygnus.com>
4 * mips-opc.c: Update COP2 operand formats for
5 vrnext and vrget instructions.
9 Mon Oct 12 10:43:51 1998 Jeffrey A Law (law@cygnus.com)
11 * m10300-opc.c: DSP instrutions which only write to one general
12 register have no restrictions on matching operands.
14 * m10300-opc.c (lsr_add): Fix typo for "lsr_add imm,reg,reg,reg" case.
17 Fri Oct 9 14:01:56 1998 Doug Evans <devans@seba.cygnus.com>
19 * m32r-opc.h,m32r-opc.c: Regenerate.
22 Thu Oct 8 06:04:38 1998 Jeffrey A Law (law@cygnus.com)
24 * m10300-opc.c (asr, lsr, asl): Fix am33 single bit shift opcode.
27 Sun Oct 4 21:01:44 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
29 * i386-dis.c (OP_3DNowSuffix): New static function.
32 (dis386_twobyte): Add GRP14, femms, and 3DNow entries.
33 (twobyte_has_modrm): Set entries corresponding to GRP14, 3DNow.
34 (insn_codep): New static variable.
35 (print_insn_x86): Init insn_codep after prefixes.
36 (grps): Add GRP14 entries for prefetch, prefetchw.
39 From Jeff B Epler <jepler@usgs.gov>
40 * i386-dis.c (Suffix3DNow): New table.
42 Wed Sep 30 10:17:50 1998 Nick Clifton <nickc@cygnus.com>
44 * d10v-opc.c: Treat TRAP as if it were a branch type instruction.
46 Mon Sep 28 14:35:43 1998 Martin M. Hunt <hunt@cygnus.com>
48 * d10v-dis.c (print_operand): If num is nonzero, then
49 add OPERAND_ACC1, not OPERAND_ACC0.
51 Thu Sep 24 09:20:03 1998 Nick Clifton <nickc@cygnus.com>
53 * d30v-opc.c: Add FLAG_JSR attribute to DBT, REIT, RTD, and TRAP
56 Tue Sep 22 17:55:14 1998 Nick Clifton <nickc@cygnus.com>
58 * d30v-opc.c: Add use of EITHER_BUT_PREFER_MU execution unit
62 Fri Sep 18 16:23:32 1998 Doug Evans <devans@canuck.cygnus.com>
64 * dvp-opc.c (gif_opcodes): Support EOP on gifimage.
67 Tue Sep 15 15:14:45 1998 Doug Evans <devans@canuck.cygnus.com>
69 * m32r-opc.h,m32r-opc.c: Add bbpc,bbpsw support.
71 start-sanitize-nortel-ppc750
72 1998-09-09 Michael Meissner <meissner@cygnus.com>
74 * ppc-opc.c (powerpc_opcodes): Add support for PowerPC 750 move
77 end-sanitize-nortel-ppc750
78 Fri Sep 4 19:42:59 1998 Nick Clifton <nickc@cygnus.com>
80 * arm-dis.c (print_insn_big_arm): Detect Thumb symbols in elf
82 (print_insn_little_arm): Detect Thumb symbols in elf object
85 Sat Aug 29 22:24:09 1998 Richard Henderson <rth@cygnus.com>
87 * alpha-dis.c (print_insn_alpha): Use the machine type to
88 decide which PALcode set to include.
90 Sun Aug 23 02:16:18 1998 Richard Henderson <rth@cygnus.com>
92 * sparc-opc.c (FBRX): Fix typo in ",a,pn %fcc3" case.
94 Fri Aug 21 16:07:52 1998 Nick Clifton <nickc@cygnus.com>
96 * d30v-opc.c (d30v_opcode_table): Add FLAG_MUL32 to MAC, MACS,
97 MSUB and MSUBS instructions.
100 Tue Aug 18 16:48:52 1998 Ian Lance Taylor <ian@cygnus.com>
102 * mips-opc.c: Insert contents of vu0.h, rather than including it.
104 * Makefile.am: Rebuild dependencies.
108 Thu Aug 13 16:23:04 1998 Ian Lance Taylor <ian@cygnus.com>
110 * ppc-opc.c (powerpc_operands): Omit parens around additions in
113 Wed Aug 12 14:00:38 1998 Ian Lance Taylor <ian@cygnus.com>
115 start-sanitize-coldfire
116 * m68k-opc.c: Correct divsl, divul, remsl, and remul for
117 ColdFire, as below for mulsl and mulul.
119 end-sanitize-coldfire
120 From Peter Jeremy <peter.jeremy@auss2.alcatel.com.au>:
121 * m68k-opc.c: Correct mulsl and mulul to use q rather than D, a,
122 +, -, and d for ColdFire.
124 From Peter Thiemann <thiemann@informatik.uni-tuebingen.de>:
125 * ppc-opc.c (insert_mbe): Handle wrapping bitmasks.
126 (extract_mbe): Likewise.
128 Wed Aug 12 11:11:34 1998 Jeffrey A Law (law@cygnus.com)
130 * m10300-opc.c: Fix typo in udf20 .. udf25 instruction opcodes.
132 * m10300-opc.c: First cut at UDF instructions.
134 Mon Aug 10 14:08:22 1998 Doug Evans <devans@canuck.cygnus.com>
136 * m32r-opc.c: Regenerate (remove semantic descriptions).
138 Mon Aug 10 12:51:12 1998 Catherine Moore <clm@cygnus.com>
140 * arm-dis.c (print_insn_big_arm): Fix indentation.
141 (print_insn_little_arm): Likewise.
143 Sun Aug 9 20:17:28 1998 Catherine Moore <clm@cygnus.com>
145 * arm-dis.c (print_insn_big_arm): Check for thumb symbol
147 (print_insn_little_arm): Likewise.
149 Mon Aug 3 12:43:16 1998 Doug Evans <devans@seba.cygnus.com>
151 Move all global state data into opcode table struct, and treat
152 opcode table as something that is "opened/closed".
153 * cgen-asm.c (all fns): New first arg of opcode table descriptor.
154 (cgen_asm_init): Delete.
155 (cgen_set_parse_operand_fn): New function.
156 * cgen-dis.c (all fns): New first arg of opcode table descriptor.
157 (cgen_dis_init): Delete.
158 * cgen-opc.c (all fns): New first arg of opcode table descriptor.
159 (cgen_current_{opcode_table_mach,endian}): Delete.
160 start-sanitize-cygnus
161 * cgen-asm.in (all fns): New first arg of opcode table descriptor.
162 * cgen-dis.in (all fns): Ditto.
163 * cgen-opc.in (all fns): Ditto.
165 * m32r-asm.c,m32r-dis.c,m32r-opc.c,m32r-opc.h: Regenerate.
167 start-sanitize-cygnus
168 * cgen-asm.in (parse_insn_normal): Ignore case in mnemonics.
170 * cgen-dis.in (print_normal): Split into two.
171 (print_address): New function.
172 (extract_insn_normal): Clarify insn_value arg.
173 (print_int_insn): Renamed from print_insn.
174 (print_insn): New arg.
175 (print_insn_@arch@): Open opcode table if not already done so.
176 Move reading of insn into print_insn.
179 Thu Jul 30 21:41:10 1998 Frank Ch. Eigler <fche@cygnus.com>
181 * d30v-opc.c (d30v_opcode_table): Add new "LKR" flag to some
185 Tue Jul 28 13:15:39 1998 Doug Evans <devans@canuck.cygnus.com>
187 Add support for new versions of mulwhi,mulwlo,macwhi,macwlo that
188 accept an accumulator choice.
189 * m32r-opc.c,m32r-opc.h: Regenerate.
192 Tue Jul 28 11:00:09 1998 Jeffrey A Law (law@cygnus.com)
194 * m10300-opc.c: Add entries for "no_match_operands" field in
198 Fri Jul 24 15:22:40 1998 Jeffrey A Law (law@cygnus.com)
200 * m10300-dis.c: Do not emit a comma before a PLUS (autoincrement)
204 Fri Jul 24 11:41:37 1998 Doug Evans <devans@canuck.cygnus.com>
206 * m32r-asm.c,m32r-opc.c: Regenerate (-Wall cleanups).
209 Thu Jul 23 09:21:03 1998 Jeffrey A Law (law@cygnus.com)
211 * m10300-opc.c: Add DSP autoincrement memory loads/stores.
213 * m10300-opc.c: Add autoincrement memory loads/stores.
217 Wed Jul 22 17:05:40 1998 Jeffrey A Law (law@cygnus.com)
219 * mips-opc.c: Make phmadh and phmsbh synonyms for phmaddh and
220 phmsubh respectively.
223 Tue Jul 21 13:41:07 1998 Doug Evans <devans@seba.cygnus.com>
225 start-sanitize-cygnus
226 * cgen-opc.in (@arch@_cgen_lookup_insn): Update call to
228 (@arch@_cgen_get_insn_operands): @arch@_cgen_get_operand renamed to
229 @arch_cgen_get_int_operand.
230 * cgen-asm.in (insert_insn_normal): New arg `pc', callers updated.
231 Update call to @arch@_cgen_insert_operand.
232 (@arch@_cgen_assemble_insn): Update call to CGEN_INSERT_FN.
233 * cgen-dis.in (print_normal): Delete use of CGEN_PCREL_OFFSET.
234 (extract_insn_normal): New arg `pc', callers updated.
235 Update call to @arch@_cgen_extract_operand.
236 (print_insn): Update call to CGEN_EXTRACT_FN.
238 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
241 Mon Jul 20 12:10:37 1998 Jeffrey A Law (law@cygnus.com)
243 * m10300-opc.c: Fix load to sp and store from sp for the am33.
244 Add more multimedia instructions.
246 Thu Jul 16 18:04:46 1998 Jeffrey A Law (law@cygnus.com)
248 * m10300-opc.c (mn10300_opcodes): Fix opcode for 4 operand "mul" and
253 Mon Jul 13 18:14:24 1998 Jeffrey A Law (law@cygnus.com)
255 * mips-opc.c (pref): Enabled for the r5900.
258 Mon Jul 13 14:53:59 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
260 * i386-dis.c (ckprefix): Handle fwait specially only when it isn't
262 (dofloat): Correct test for fnstsw. Print `fnstsw %ax' rather
264 (OP_J): Remove unnecessary subtraction when 16-bit displacement
265 will be masked later.
268 Fri Jul 10 23:09:56 1998 Jeffrey A Law (law@cygnus.com)
270 * m10300-opc.c (mn10300_opcodes): Fix destination operand for 3 operand
273 Wed Jul 8 11:32:44 1998 Jeffrey A Law (law@cygnus.com)
275 * m10300-dis.c (disassemble): When printing RREGs and XRREGs, map
276 from raw register #s to symbolic names to make debugging easier.
279 Thu Jul 2 17:11:27 1998 Doug Evans <devans@seba.cygnus.com>
281 * m32r-opc.h (CGEN_MIN_INSN_SIZE): New #define.
283 Wed Jul 1 16:11:16 1998 Doug Evans <devans@seba.cygnus.com>
285 * m32r-asm.c,m32r-dis.c,m32r-opc.c,m32r-opc.h: Regenerate.
286 start-sanitize-cygnus
287 * Makefile.am (CGENDIR): Set via configure.
288 (CGEN): New variable.
289 (CGENFILES): object.scm renamed to cos.scm.
290 (run-cgen): Renamed from cgen. stamp file renamed to stamp-$prefix.
291 (stamp-m32r): Pass prefix to run-cgen.
292 * Makefile.in: Regenerate.
293 * cgen-asm.in: @arch@-opc.h renamed to @prefix@-opc.h.
294 * cgen-dis.in: Ditto.
295 * cgen-opc.in: Ditto.
296 * cgen.sh: New args cgen,prefix. Delete args scheme,schemeflags.
297 * configure.in: AC_SUBST cgen,cgendir. No longer look for guile.
298 * configure: Regenerate.
302 Tue Jun 30 09:59:37 1998 Jeffrey A Law (law@cygnus.com)
304 * m10300-opc.c: Reorder "movbu" and "movhu" instructions too.
306 Mon Jun 29 14:54:32 1998 Jeffrey A Law (law@cygnus.com)
308 * m10300-opc.c: Reorder more instructions so that we do not
309 accidentally match a mn10300 instruction when we really
310 wanted an am33 instruction.
313 Fri Jun 26 11:08:55 1998 Jeffrey A Law (law@cygnus.com)
315 * m10300-dis.c: Only recognize instructions from the currently
317 * m10300-opc.c: Add field indicating the particular variant of
318 the mn10300 each instruction is available on.
320 Fri Jun 26 12:04:21 1998 Ian Lance Taylor <ian@cygnus.com>
322 * configure.in: For bfd_vax_arch, build vax-dis.lo.
323 * Makefile.am: Rebuild dependencies.
324 (CFILES): Add vax-dis.c.
325 (ALL_MACHINES): Add vax-dis.lo.
326 * aclocal.m4: Rebuild with current libtool.
327 * configure, Makefile.in: Rebuild.
329 Fri Jun 26 12:03:20 1998 Klaus Kaempf <kkaempf@progis.de>
331 * vax-dis.c: New file, from work by Pauline Middelink
332 <middelin@polyware.iaf.nl>.
333 * disassemble.c (ARCH_vax): Define if ARCH_all.
334 (disassembler): Add case for ARCH_vax.
335 * makefile.vms: Support compilation on vms/vax.
338 Wed Jun 24 17:14:01 1998 Ian Carmichael <iancarm@cygnus.com>
340 * dvp-opc.c (DVP_OPERAND_RELOC_11_S4): Temporarily back out
341 the DVP_OPERAND_RELOC_11_S4 relocation.
345 Wed Jun 24 09:53:06 1998 Jeffrey A Law (law@cygnus.com)
347 * m10300-dis.c (print_insn_mn10300): 0xf7 opcode prefix specifies
349 (disassemble): Correctly handle FMT_D10 instructions.
351 * m10300-opc.c (mn10300_opcodes): Fix typo in IMM24 versions of the
352 am33 shift instructions.
354 * m10300-dis.c (print_insn_mn10300): 0xf9 opcode prefix specifies
356 (disassemble): Handle new instruction formats FMT_D6, FMT_D7, FMT_D8
357 FMT_D9 and FMT_D10. Handle various new opcode flags for the am33.
359 * m10300-opc.c (IMM32_HIGH8_MEM): New operand type.
360 (mn10300_opcodes): Reorder so as to try and select opcodes from
361 the core chip when multiple alternatives exist. Change several
362 am33 instructions to use IMM32_HIGH8_MEM. Fix typos in "mac" and
363 "macbu" instructions. Fix typos in a couple DSP instructions too.
366 Tue Jun 23 19:42:18 1998 Mark Alexander <marka@cygnus.com>
368 * m10200-dis.c (print_insn_mn10200): Fix various non-portabilities
369 related to sign extension and the size of ints.
371 Tue Jun 23 10:59:26 1998 Jeffrey A Law (law@cygnus.com)
373 * m10300-opc.c: Support one operand "asr", "lsr" and "asl"
374 instructions. Support (sp) addressing mode by expanding it into
378 Mon Jun 22 15:48:29 1998 Ian Carmichael <iancarm@cygnus.com>
380 * dvp-opc.c (LIMM11, LUIMM15): New symbol types
381 DVP_OPERAND_RELOC_U15_S3 and DVP_OPERAND_RELOC_11_S4 to allow labels to
382 be used as immediate values.
386 Mon Jun 22 13:36:27 1998 Jeffrey A Law (law@cygnus.com)
388 * m10300-opc.c: Support 4 byte DSP instructions.
391 Sat Jun 20 14:46:20 1998 Frank Ch. Eigler <fche@cygnus.com>
393 * mips-dis.c (_print_insn_mips): Fix argument interchange typo.
396 Fri Jun 19 16:47:06 1998 Jeffrey A Law (law@cygnus.com)
398 * m10300-opc.c: Support 6 and 7 byte am33 instructions.
401 Fri Jun 19 09:16:42 1998 Mark Alexander <marka@cygnus.com>
403 * m10200-dis.c (print_insn_mn10200): Recognize 'break' pseudo-op.
406 Fri Jun 19 09:42:51 1998 Jeffrey A Law (law@cygnus.com)
408 * m10300-opc.c: Support for 3 byte and 4 byte extended instructions
409 found on the mn10300.
412 1998-06-18 Ulrich Drepper <drepper@cygnus.com>
414 * i386-dis.c: Add support for fxsave, fxrstor, sysenter and
417 Thu Jun 18 10:22:24 1998 John Metzler <jmetzler@cygnus.com>
419 * mips-dis.c (print_insn_little_mips): Previously, instruction
420 printing references the symbol table to determine whether the
421 instruction resides in a block regular instructions or mips16
422 instructions. However, when the disassembler gets used in other
423 environments where the symbol table is not present, we no longer
424 rely in the symbol table, rather, use the low bit of the
425 instructions address to guess. There should be no change for usage
426 of the disassembler in host based programse, gdb ,objdump.
427 (print_insn_big_mips): ditto.
428 (print_insn_mips): ditto
430 Wed Jun 17 21:19:01 1998 Mark Alexander <marka@cygnus.com>
432 * m10200-dis.c (print_insn_mn10200): Don't bomb on unknown opcodes.
434 Wed Jun 17 17:49:23 1998 Jeffrey A Law (law@cygnus.com)
437 * m10300-opc.c (USP, SSP, MSP, PC, IMM4, EPSW, RN0, RM1): New
438 operands for the am33.
439 (mn10300_opcodes): Add new instructions from the am33.
441 * m10300-opc.c (mn10300_opcodes): Change opcode for "syscall".
443 Tue Jun 16 13:10:51 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
445 * i386-dis.c (index16): Add '%' to register names. Use ','
448 Sat Jun 13 11:33:55 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
450 * i386-dis.c: Don't print opcode suffix when we can figure out the
451 size (and gas can!) by register operands, or from the default
453 (putop): Handle 'A', 'B', 'L', 'P', 'Q', 'R' macros. Rename 'C'
455 (dis386, dis386_twobyte, grps): Use new suffix macros.
456 (dis386): Correct imul Ib to imul sIb. Change jnl to jge to be
457 consistent. Add suffix for call, jmp, lcall, ljmp, iret. Reverse
458 order of cmps operands to agree with Intel docs. Correct operand
459 of aad and aam (Ib -> sIb). Change ud2b from 0fb8 to 0fb9 to
460 agree with Intel docs.
461 (print_insn_x86): Print orphan fwait before other prefixes.
462 Return correct byte count for orphan fwait with prefixes. Don't
463 print `bound' operands in reverse order.
464 (ckprefix): Stop accumulating prefixes if we get fwait.
465 (OP_DIR): Print `$' before Ap operands of ljmp, lcall.
467 Fri Jun 12 13:40:38 1998 Tom Tromey <tromey@cygnus.com>
469 * po/Make-in (all-yes): If maintainer mode, depend on .pot file.
470 ($(PACKAGE).pot): Unconditionally depend on POTFILES.
472 Fri Jun 12 11:04:06 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
474 Fix problems when bfd_vma is wider than long.
475 * i386-dis.c: Make op_address and start_pc unsigned.
476 (set_op): Make parameter unsigned.
477 (print_insn_x86): Cast to bfd_vma when passing a value to
479 * ns32k-dis.c (CORE_ADDR): Don't define.
480 (print_insn_ns32k): Change type of addr to bfd_vma. Use
481 bfd_scan_vma to read back address.
482 (print_insn_arg): Change type of addr to bfd_vma. Use sprintf_vma
484 * m68k-dis.c (COERCE32): Cast to bfd_signed_vma to avoid overflow.
485 (NEXTULONG): New definition.
486 (print_insn_m68k): Avoid overflow when computing third argument of
488 (print_insn_arg): Use NEXTULONG to fetch 32 bit address values.
489 Use disp instead of val to store offset values.
490 (print_indexed): Use base_disp instead of word to store base
491 displacement, to avoid overflow.
492 * m10300-dis.c (disassemble): Cast value to long when computing
493 pc-relative address, to get correct sign extension.
495 Wed Jun 10 15:58:37 1998 Doug Evans <devans@canuck.cygnus.com>
497 * m32r-opc.c: Regenerate.
499 Tue Jun 9 14:27:57 1998 Nick Clifton <nickc@cygnus.com>
501 * arm-opc.h (thumb_opcodes): Display 'add rx, rY, #0' insns as
502 'mov rX, rY'. Patch courtesy of Tony Thompson <Tony.Thompson@arm.com>
504 Mon Jun 8 18:17:21 1998 Nick Clifton <nickc@cygnus.com>
506 * d30v-opc.c: Remove FALG_MUL32 attribyte from MULX2H insn.
508 Fri Jun 5 23:47:55 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
510 * i386-dis.c: Combine aflag and dflag into sizeflag. Change OP_*
512 (OP_DSreg): Rename from OP_DSSI.
513 (OP_ESreg): Rename from OP_ESDI.
514 (Xb, Xv, Yb, Yv): Use index reg code, not b_mode or v_mode.
516 (append_seg): Rename from append_prefix.
517 (ptr_reg): New function.
518 (dis386): Add S suffix to pushf, popf, ret, lret, enter, leave.
520 (PREFIX_ADDR): Rename from PREFIX_ADR.
521 (float_reg): Add non-broken opcodes for people who don't want
524 Fri Jun 5 19:15:04 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
526 * m68k-opc.c (tstb, tstw, tstl): Don't allow pcrel on
529 Wed Jun 3 18:56:22 1998 H.J. Lu <hjl@gnu.org>
531 * i386-dis.c (dis386): Change 0x60 to "pushaS", 0x61 to "popaS".
533 Tue Jun 2 15:06:46 1998 Geoff Keating <geoffk@ozemail.com.au>
535 * ppc-opc.c (powerpc_macros): Support shifts and rotates of size
536 0; produce error message for shifts of size 32 (or 64 for 64-bit
537 shifts), because the hardware doesn't support them.
540 Mon Jun 1 10:27:26 1998 Jeffrey A Law (law@cygnus.com)
542 * mips-opc.c (c.lt.s): Remove r5900 specific variant.
545 * vu0.h (sqc2): Fix opcode.
547 * mips-opc.c (rsqrt.s): Update based on r5900 ISA manual version 2.1
551 start-sanitize-cygnus
552 Thu May 28 08:46:09 1998 Catherine Moore <clm@cygnus.com>
554 * mips-opc.c (macc, maccu, macchi, macchiu, msac, msacu, msachi, msachiu):
555 Change pinfo to use WR_HILO.
558 Wed May 27 15:29:13 1998 Nick Clifton <nickc@cygnus.com>
560 * d30v-opc.c: Add new operand: Ra3. Change SHORT_B3, SHORT_B3b,
561 LONG_2, LONG_2b formats to use this new operand.
563 Tue May 26 20:47:48 1998 Stan Cox <scox@cygnus.com>
565 * sparc-dis.c (compute_arch_mask): Added bfd_mach_sparc_sparclite_le.
567 Tue May 26 20:45:33 1998 Mark Alexander <marka@cygnus.com>
569 * sparc-dis.c (print_insn_sparc): big endian instruction / little
572 Tue May 26 16:14:39 1998 Nick Clifton <nickc@cygnus.com>
574 * d30v-opc.c (d30v_format_table): Change definition of SHORT_B3
575 and SHORT_B3b formats to use Rb instead of Ra.
577 Add FLAG_MUL16 to MUL2XH opcode.
579 Add FLAG_ADDSUBppp to SRC and SATHp opcodes to implement extension
580 to existing 1.1.1 parallelisation prohibition procedure.
582 Fri May 22 16:00:00 1998 Doug Evans <devans@canuck.cygnus.com>
584 * cgen-asm.in (insert_normal): Handle empty fields and 64 bit hosts.
585 * cgen-dis.in (extract_normal): Likewise.
586 * m32r-asm.c,m32r-dis.c: Regenerate.
589 Fri May 22 11:44:10 1998 Doug Evans <devans@canuck.cygnus.com>
591 * dvp-opc.c (parse_dotdest): Missing dest -> xyzw.
595 Wed May 20 00:22:27 1998 Jeffrey A Law (law@cygnus.com)
597 * mips-opc.c (multu1): Add two operand variant for the r5900.
600 Tue May 19 17:36:08 1998 Ian Lance Taylor <ian@cygnus.com>
602 * mips-dis.c (print_mips16_insn_arg): Handle type ']' correctly
603 with a shift count of 0.
606 Mon May 18 14:27:06 1998 Frank Ch. Eigler <fche@cygnus.com>
608 * mips-opc.c (mult1): Add two-operand variety of mult1 for R5900.
610 Mon May 18 11:44:00 1998 Jeffrey A Law (law@cygnus.com)
612 * mips-dis.c (print_insn_arg): Handle ';' opcode completer.
613 (_print_insn_mips): Likewise.
614 * vu0.h (vopmula, vopmsub): Correctly handle opcode/operand
618 Fri May 15 14:58:31 1998 Doug Evans <devans@seba.cygnus.com>
620 * cgen-opc.c (cgen_hw_lookup_by_name): Renamed from cgen_hw_lookup.
621 (cgen_hw_lookup_by_num): New function.
624 * m32r-opc.c, m32r-opc.h: Regenerate, delete h-abort.
627 Wed May 13 17:03:59 1998 Doug Evans <devans@canuck.cygnus.com>
629 * m32r-asm.c: Regenerate (handle uppercase HIGH/SHIGH/LOW/SDA).
631 Wed May 13 14:34:31 1998 Mark Alexander <marka@cygnus.com>
633 * sparc-dis.c (print_insn_sparc): Always fetch instructions
634 as big-endian on SPARClite.
637 Tue May 12 13:39:51 1998 Nick Clifton <nickc@cygnus.com>
639 * m32r-opc.c: Regenerated - SPECIAL attribute added to some
641 * m32r-opc.h: Regenerated - SPECIAL attribute added to some
645 Tue May 12 11:46:31 1998 Richard Henderson <rth@cygnus.com>
647 * d30v-opc.c (pre_defined_register): Remove alias for r0.
650 Mon May 11 13:12:15 1998 Frank Ch. Eigler <fche@cygnus.com>
652 * mips-opc.c (break): Added 20-bit single-operand break
653 instruction for R5900 only.
656 Sun May 10 22:37:22 1998 Jeffrey A Law (law@cygnus.com)
658 * po/Make-in (install-info): New target.
660 Thu May 7 17:15:59 1998 Ian Lance Taylor <ian@cygnus.com>
662 * configure.in (WIN32LIBADD): Add -lintl on cygwin32.
663 * configure: Rebuild.
665 Thu May 7 12:49:46 1998 Frank Ch. Eigler <fche@cygnus.com>
667 * mips-opc.c (teq,tge,tgeu,tlt,tltu,tne): Added three-operand
668 variety of ISA2 instructions to set bottom ten bits of trap code.
670 Thu May 7 11:54:25 1998 Ian Lance Taylor <ian@cygnus.com>
672 * Makefile.am (config.status): Add explicit target so that
673 config.status depends upon bfd/configure.in.
674 * Makefile.in: Rebuild.
676 Thu May 7 09:33:02 1998 Frank Ch. Eigler <fche@cygnus.com>
678 * mips-opc.c (break, sdbbp): Added two-operand variety of ISA1
679 instructions to set bottom ten bits of break code.
680 * mips-dis.c (print_insn_arg): Implement 'q' operand format used
681 for above optional argument.
683 start-sanitize-cygnus
684 Wed May 6 14:47:17 1998 Doug Evans <devans@seba.cygnus.com>
686 * cgen.sh: s/@ARCH@/${ARCH}/ in opc.h generation.
687 * m32r-opc.h: Regenerate.
690 Wed May 6 15:30:06 1998 Klaus Kaempf <kkaempf@progis.de>
692 * makefile.vms: Run dec c with /nodebug.
694 Mon May 4 10:19:57 1998 Tom Tromey <tromey@cygnus.com>
696 * Makefile.in: Rebuilt.
697 * Makefile.am: Regenerated dependencies with mkdep.
699 * opintl.h (_): Define as dgettext.
701 start-sanitize-cygnus
702 Fri May 1 13:47:42 1998 Doug Evans <devans@canuck.cygnus.com>
704 * configure.in: Add support for --enable-cgen-maint.
705 * Makefile.am (M32R_DEPS): New variable.
706 (m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c): Update dependencies.
707 * aclocal.m4: Regenerate.
708 * Makefile.in: Regenerate.
709 * configure: Regenerate.
711 * Makefile.am (CGENFILES): Add minsn.scm.
714 Tue Apr 28 14:12:12 1998 Nick Clifton <nickc@cygnus.com>
716 * cgen-asm.c: Internationalised.
717 start-sanitize-cygnus
718 * cgen-asm.in: Internationalised.
719 * cgen-opc.in: Internationalised.
721 * m32r-asm.c: Internationalised.
722 * m32r-dis.c: Internationalised.
723 * m32r-opc.c: Internationalised.
725 * aclocal.m4: Regenerated.
726 * configure: Regenerated.
727 * Makefile.am (POTFILES): Remove inclusion of BFD_H.
728 * Makefile.in: Rebuild.
729 * po/POTFILES.in: Rebuilt using rule in Makefile.in.
730 * po/opcodes.pot: Rebuilt after changing POTFILES.in.
732 Tue Apr 28 13:13:13 1998 Ian Lance Taylor <ian@cygnus.com>
734 * configure.in: Call AC_ISC_POSIX near start. Move CY_GNU_GETTEXT
736 * aclocal.m4, configure: Rebuild with current tools.
738 Mon Apr 27 14:31:00 1998 Nick Clifton <nickc@cygnus.com>
740 * opintl.h: New file - contains internationalisation macros used
741 by source files in this directory.
742 * po/: New subdirectory - contains internationalisation files.
743 * po/Make-in: New file - Makefile constructor.
744 * po/POTFILES.in: New file - list of files in opcodes directory
745 that should be scan for internationalisation macros.
746 * po/opcodes.pot: New file - list of internationisation strings
747 found in files mentioned in po/POTFILES.in.
748 * Makefile.am: Add rule to build po/POTFILES.in. Add SUBDIRS
749 entry. Add intl directory to include paths.
750 * acconfig.h: Add ENABLE_NLS, HAVE_CATGETS, HAVE_GETEXT,
751 HAVE_STRCPY, HAVE_LC_MESSAGES
752 * configure.in: Add rule to build Makefile in po subdirectory.
753 * Makefile.in: Rebuilt.
754 * aclocal.m4: Rebuilt.
755 * config.in: Rebuilt.
756 * configure: Rebuilt.
757 * alpha-opc.c: Internationalised.
758 * arc-dis.c: Internationalised.
759 * arc-opc.c: Internationalised.
760 * arm-dis.c: Internationalised.
761 * cgen-asm.c: Internationalised.
762 * d30v-dis.c: Internationalised.
763 * dis-buf.c: Internationalised.
765 * dvp-dis.c: Internationalised.
766 * dvp-opc.c: Internationalised.
768 * h8300-dis.c: Internationalised.
769 * h8500-dis.c: Internationalised.
770 * i386-dis.c: Internationalised.
771 * m10200-dis.c: Internationalised.
772 * m10300-dis.c: Internationalised.
773 * m68k-dis.c: Internationalised.
774 * m88k-dis.c: Internationalised.
775 * mips-dis.c: Internationalised.
776 * ns32k-dis.c: Internationalised.
777 * opintl.h: Internationalised.
778 * ppc-opc.c: Internationalised.
779 * sparc-dis.c: Internationalised.
780 * v850-dis.c: Internationalised.
781 * v850-opc.c: Internationalised.
783 Mon Apr 27 10:33:56 1998 Doug Evans <devans@seba.cygnus.com>
785 * cgen-asm.c (cgen_current_opcode_table): Renamed from ..._data.
786 (asm_hash_table_entries): New variable.
787 (cgen_asm_init): Free asm_hash_table_entries.
788 (hash_insn_array,hash_insn_list): New functions.
789 (build_asm_hash_table): Use them. Hash macro insns as well.
790 (cgen_asm_lookup_insn): Update.
791 * cgen_dis.c (cgen_current_opcode_table): Renamed from ..._data.
792 (dis_hash_table_entries): New variable.
793 (cgen_dis_init): Free dis_hash_table_entries.
794 (hash_insn_array,hash_insn_list): New functions.
795 (build_dis_hash_table): Use them. Hash macro insns as well.
796 (cgen_dis_lookup_insn): Update.
797 * cgen-opc.c (cgen_current_opcode_table): Renamed from ..._data.
798 (cgen_set_cpu,cgen_hw_lookup,cgen_insn_count): Update.
799 (cgen_macro_insn_count): New function.
800 * cgen-opc.in (@arch@_cgen_lookup_insn): New arg alias_p.
801 All callers updated. Sanity check result of extract fn.
802 (@arch@_cgen_get_insn_operands): Change result type to void.
803 Delete args insn_value, length. New arg fields. All callers updated.
804 (@arch@_cgen_lookup_get_insn_operands): New function.
805 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
807 Fri Apr 24 16:07:57 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
809 * i386-dis.c (OP_DSSI): Print segment override.
812 Thu Apr 23 12:32:07 1998 Frank Ch. Eigler <fche@cygnus.com>
814 * mips-opc.c (msub.s): Correct mask pattern for disassembly.
818 Mon Apr 20 19:11:55 1998 Frank Ch. Eigler <fche@cygnus.com>
820 * mips-opc.c (madd.s): Correct mask pattern for disassembly.
824 Sat Apr 18 00:29:18 1998 Jeffrey A Law (law@cygnus.com)
826 * vu0.h (vlqd, vlqi): Update per revised specs.
830 Thu Apr 16 11:44:59 1998 Doug Evans <devans@canuck.cygnus.com>
832 * dvp-opc.c (parse_vif_unpackloc,insert_vif_unpackloc): Delete.
833 (vif_operands): Update.
834 (vif_get_unpackloc): Delete.
835 (state_vif_unpackloc{,_star_p}): Delete.
836 (dvp_opcode_init_parse): Update.
837 (vif_unpack_len_value): Avoid divide by zero.
841 Wed Apr 15 10:30:07 1998 Frank Ch. Eigler <fche@cygnus.com>
843 * vu0.h: Specs changed for VCALLMSR bit pattern.
844 * mips-dis.c: (print_insn_arg) Matching change.
847 Mon Apr 13 16:59:39 1998 Nick Clifton <nickc@cygnus.com>
849 * arm-dis.c (print_insn_arm): Add "_all" extension to 'C'
852 Mon Apr 13 16:50:27 1998 Ian Lance Taylor <ian@cygnus.com>
854 * Makefile.am (libopcodes_la_LIBADD): Add @WIN32LIBADD@.
855 (libopcodes_la_LDFLAGS): Add @WIN32LDFLAGS@.
856 * configure.in: Define and substitute WIN32LDFLAGS and
858 * aclocal.m4: Rebuild with new libtool.
859 * configure, Makefile.in: Rebuild.
862 Mon Apr 13 16:02:02 1998 Frank Ch. Eigler <fche@cygnus.com>
864 * vu0.h: Corrected bit pattern for VMAXI opcode.
867 Fri Apr 10 18:14:31 1998 Doug Evans <devans@canuck.cygnus.com>
869 * m32r-opc.c: Regenerate.
872 Mon Apr 6 17:16:48 1998 Doug Evans <devans@canuck.cygnus.com>
874 * dvp-opc.c (vif_macros): Tweak unpackloc operand.
875 (dvp_expand_macro): Implement.
876 (insert_vif_datalen): Record value with max+1 -> 0 conversion.
877 (vif_unpack_len): Perform 0 -> max+1 conversion on `wl' value.
880 Sun Apr 5 16:04:39 1998 H.J. Lu <hjl@gnu.org>
882 * Makefile.am (stamp-lib): Check that .libs/libopcodes.a exists
883 before trying to copy it.
884 * Makefile.in: Rebuild.
886 Thu Apr 2 17:25:49 1998 Nick Clifton <nickc@cygnus.com>
888 * m32r-opc.c: Use signed immediate values for CMPUI instruction.
891 Thu Apr 2 16:44:23 1998 Nick Clifton <nickc@cygnus.com>
893 * m32r-opc.c: Fix bit patterns for SAT and SATB.
896 Wed Apr 1 16:20:27 1998 Ian Dall <Ian.Dall@dsto.defence.gov.au>
898 * ns32k-dis.c (bit_extract_simple): New function to extract bits
899 from an arbitrary valid buffer instead of fetching them on demand
901 (invalid_float): use bit_extract_simple() instead of bit_extract().
904 Wed Apr 1 14:57:54 1998 Nick Clifton <nickc@cygnus.com>
906 * m32r-opc.c: Fix SATB bit pattern. Add extra control registers.
907 * m32r-opc.h: Add extra control registers.
910 Tue Mar 31 11:09:08 1998 Ian Lance Taylor <ian@cygnus.com>
912 From H.J. Lu <hjl@gnu.org>:
913 * i386-dis.c (dis386): Change 0x8c and 0x8e to movS, and change Ew
916 Mon Mar 30 17:32:03 1998 Ian Lance Taylor <ian@cygnus.com>
918 * Branched binutils 2.9.
920 Mon Mar 30 15:18:00 1998 Ken Raeburn <raeburn@cygnus.com>
922 * d30v-dis.c (print_insn_d30v): Don't use uninitialized "num" when
923 disassembling last 4 bytes of a section.
925 Fri Mar 27 18:08:13 1998 Ian Lance Taylor <ian@cygnus.com>
927 Fix some gcc -Wall warnings:
928 * arc-dis.c (print_insn): Add casts to avoid warnings.
929 * cgen-opc.c (cgen_keyword_lookup_name): Likewise.
930 * d10v-dis.c (dis_long, dis_2_short): Likewise.
932 * dvp-opc.c (issymchar, SKIP_BLANKS): Likewise.
933 (parse_dotdest, parse_dotdest1, u_parse_sdest): Likewise.
934 (parse_bc, parse_vfreg, parse_accdest): Likewise.
935 (parse_ffstreg, parse_vif_mode): Likewise.
937 * m10200-dis.c (disassemble): Likewise.
938 * m10300-dis.c (disassemble): Likewise.
939 * ns32k-dis.c (print_insn_ns32k): Likewise.
940 * ppc-opc.c (insert_ral, insert_ram): Likewise.
941 * cgen-dis.c (build_dis_hash_table): Remove used local variables.
942 * cgen-opc.c (cgen_keyword_search_next): Likewise.
943 * d10v-dis.c (dis_long, dis_2_short): Likewise.
944 * d30v-dis.c (print_insn_d30v, lookup_opcode): Likewise.
946 * dvp-dis.c (print_dma, print_vif, print_gif): Likewise.
947 * dvp-opc.c (parse_dest1, print_uflags): Likewise.
948 (parse_gif_nloop, dvp_opcode_init_tables): Likewise.
950 * ns32k-dis.c (bit_extract, print_insn_ns32k): Likewise.
952 * tic80-dis.c (print_one_instruction): Likewise.
954 * w65-dis.c (print_operand): Likewise.
955 * z8k-dis.c (fetch_data): Likewise.
956 * a29k-dis.c: Add return type for find_byte_func_type.
957 * arc-opc.c: Include <stdio.h>. Remove declarations of
958 insert_multshift and extract_multshift.
959 * d30v-dis.c (lookup_opcode): Parenthesize assignments in
961 (extract_value): Fully parenthesize expression.
963 * dvp-opc.c: Include <ctype.h>.
964 (print_sdest): Add default case to switch.
966 * h8500-dis.c (print_insn_h8500): Initialize local variables.
967 * h8500-opc.h (h8500_table): Fully bracket initializer.
968 * w65-opc.h (optable): Likewise.
969 * i386-dis.c (print_insn_x86): Declare aflag and flag parameters.
970 * i386-dis.c (OP_E): Initialize local variables.
971 * m10200-dis.c (print_insn_mn10200): Likewise.
972 * mips-dis.c (print_insn_mips16): Likewise.
973 * sh-dis.c (print_insn_shx): Likewise.
974 * v850-dis.c (print_insn_v850): Likewise.
975 * ns32k-dis.c (print_insn_arg): Declare.
976 (get_displacement, invalid_float): Declare.
977 (list_search, sign_extend, flip_bytes): Declare return type.
978 (get_displacement): Likewise.
979 (print_insn_arg): Likewise. Make d int. Fix sprintf format
981 (print_insn_ns32k): Make i unsigned.
982 (invalid_float): Make static. Declare type of val.
983 * tic30-dis.c (print_par_insn): Make i size_t. Don't check strlen
984 on each for iteration.
985 * tic30-dis.c (get_indirect_operand): Likewise.
986 * z8k-dis.c (print_insn_z8001): Declare return type.
987 (print_insn_z8002): Likewise.
988 (unparse_instr): Fix sprintf format strings.
990 Fri Mar 27 00:05:23 1998 Jeffrey A Law (law@cygnus.com)
992 * mips-opc.c: Add "sync.l" and "sync.p".
995 Thu Mar 26 13:27:37 1998 Doug Evans <devans@canuck.cygnus.com>
997 * dvp-opc.c (extract_vif_datalen): Rewrite.
998 (vif_insn_len): Perform 0->max+1 conversion for direct length.
1000 Wed Mar 25 13:32:36 1998 Doug Evans <devans@canuck.cygnus.com>
1002 * dvp-dis.c (print_insn): Print unpack address in hex.
1003 * dvp-opc.c (parse_vif_mpgloc): Renamed from parse_vif_mpgloc_star.
1004 Don't skip over '*', just record it.
1005 (insert_vif_mpgloc): Don't update state_vif_mpgloc if '*' value.
1006 (parse_vif_unpackloc): Renamed from parse_vif_unpackloc_star.
1007 Don't skip over '*', just record it.
1008 (insert_vif_unpackloc): Don't update state_vif_unpackloc if '*' value.
1009 (vif_operands): Delete VIF_MPGLOC_STAR,VIF_UNPACKLOC_STAR entries.
1010 (vif_opcodes): Likewise.
1011 (state_vif_{mpg,unpack}loc_star_p): New static locals.
1012 (vif_macros,vif_macro_count): New globals.
1013 (vif_unpack_len_value): New arguments wl,cl. All callers updated.
1014 (vif_set_{mpg,unpack}loc): Delete. All callers updated.
1015 (vif_get_wl_cl): New function.
1016 (dvp_opcode_init_parse): Init mpgloc,unpackloc state.
1019 Wed Mar 25 14:32:48 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1021 * m68k-dis.c (print_insn_m68k): Use info->mach to select the
1022 default m68k variant to recognize.
1024 * i960-dis.c (pinsn): Change type of first argument to bfd_vma.
1025 (ctrl, cobr, mem, ea): Likewise.
1026 (print_addr): Likewise. Remove cast.
1027 (ea): Cast argument of print_addr to bfd_vma.
1029 * cgen-asm.c (cgen_parse_signed_integer): Fix type of local
1031 (cgen_parse_unsigned_integer): Likewise.
1032 (cgen_parse_address): Likewise.
1034 Wed Mar 25 14:31:31 1998 Ian Lance Taylor <ian@cygnus.com>
1036 * i960-dis.c (ctrl): Add full braces to structure initialization.
1037 (cobr, mem, reg): Likewise.
1038 (ea): Correct parenthesization in expression.
1040 * cgen-asm.c: Include <ctype.h>.
1041 (build_asm_hash_table): Remove unused local variable i.
1042 (cgen_parse_keyword): Add casts to avoid warnings.
1044 * arm-dis.c (print_insn_big_arm): Only call coffsymbol for a COFF
1045 symbol. Fix indentation.
1046 (print_insn_little_arm): Likewise.
1048 start-sanitize-r5900
1049 Tue Mar 24 18:11:13 1998 Jeffrey A Law (law@cygnus.com)
1051 * vu0.h (cfc2, ctc2): Add variants with ".i" and ".ni"
1055 start-sanitize-m32rx
1056 Mon Mar 23 11:32:11 1998 Nick Clifton <nickc@cygnus.com>
1058 * m32r-opc.c (m32r_cgen_insn_table_entries): Fix SATH bit pattern
1063 Mon Mar 23 09:45:04 1998 Doug Evans <devans@canuck.cygnus.com>
1065 * dvp-opc.c (vif_operand_datalen_special): New global.
1068 start-sanitize-r5900
1069 Sun Mar 22 13:00:14 1998 Jeffrey A Law (law@cygnus.com)
1071 * vu0.h (vcallms): Use 'O' for call target operand.
1072 * mips-dis.c (print_insn_arg): Handle 'O'.
1075 Fri Mar 20 18:55:18 1998 Ian Lance Taylor <ian@cygnus.com>
1077 * configure.in: Use AM_DISABLE_SHARED.
1078 * aclocal.m4, configure: Rebuild with libtool 1.2.
1080 start-sanitize-r5900
1081 Fri Mar 20 09:01:31 1998 Jeffrey A Law (law@cygnus.com)
1083 * mips-dis.c: Change '%' to '#' in r5900 support.
1087 Thu Mar 19 15:46:53 1998 Nick Clifton <nickc@cygnus.com>
1089 These patches are courtesy of Jonathan Walton and Tony Thompson
1090 (athompso@cambridge.arm.com).
1092 * arm-dis.c (print_insn_thumb): Ignore bottom two bits of PC
1095 * arm-opc.h (thumb_opcodes): Annotate PC relative addresses with
1096 both the offset and the label closest to the destination.
1098 start-sanitize-r5900
1099 Thu Mar 19 13:53:25 1998 Jeffrey A Law (law@cygnus.com)
1101 * vu0.h: New file with cop2/vu0 instructions.
1102 * mips-opc.c: Include vu0.h.
1103 * mips-dis.c (print_insn_arg): Handle new args 0-9, +, -, %, K, &,
1105 (print_insn_mips): Do not emit a tab after an instruction if the
1106 first arg is an instruction completer (&). If the next arg is an
1107 escape character (%), then print the next arg verbatim.
1108 * Makefile.am (mips-opc.lo): Depend on vu0.h
1112 Thu Mar 19 10:42:51 1998 Doug Evans <devans@canuck.cygnus.com>
1114 * dvp-opc.c (vif_opcodes): Add stcycl.
1116 Tue Mar 17 10:53:58 1998 Doug Evans <devans@canuck.cygnus.com>
1118 * dvp-dis.c (print_dma): Change length from 16 to 8.
1121 Sat Mar 14 23:47:14 1998 Doug Evans <devans@seba.cygnus.com>
1123 * m32r-opc.h: Regenerate.
1126 Thu Mar 12 09:18:54 1998 Doug Evans <devans@canuck.cygnus.com>
1128 * dvp-opc.c (print_dest1): Print dest spec again.
1129 (print_vfreg,print_accdest): Likewise.
1130 (vif_unpack_len): Round result up to word boundary.
1133 start-sanitize-vr4320
1134 Tue Mar 10 15:57:23 1998 Gavin Koch <gavin@cygnus.com>
1136 * mips-opc.c ("clz","dclz"): Added the 4320 versions.
1138 Mon Mar 9 15:22:06 1998 Gavin Koch <gavin@cygnus.com>
1140 * mips-opc.c ("macc*","mul*"): Added the 4320 versions
1145 Fri Mar 6 11:27:53 1998 Doug Evans <devans@canuck.cygnus.com>
1147 * dvp-dis.c (print_gif): Fix length calcs for gifimage.
1148 (print_insn): Do mask comparison on proper opcode word.
1149 Print unsigned values in hex.
1150 * dvp-opc.c (u_parse_sdest): Return -1 if dest missing.
1151 (parse_bc): Catch missing dest.
1152 (parse_vfreg): Replace atoi call with strtol.
1153 (parse_{bcftreg,ffstreg,freg,ireg,vi01,gif_prim,gif_nloop}): Likewise.
1154 (parse_bcftreg,parse_ffstreg): Handle missing dest.
1155 (extract_gif_eop): New function.
1156 (gif_operands): Update eop entry.
1157 (VGIFOP,VGIFNREGS): Fix calcs.
1158 (extract_gif_prim): Set *pinvalid to 1 if prim not used.
1159 (gif_regs): Add entry for unused 11 case.
1160 (print_gif_regs): Print empty list instead of nothing.
1161 (extract_gif_nloop): Fix value calc.
1162 (print_gif_nloop): Always print value, even if 0.
1163 (insert_vif_wlcl,extract_vif_wlcl): New functions.
1164 (vif_operands): Use them for wl,cl fields.
1165 (state_vif_wl,state_vif_cl): New static locals.
1166 (parse_vif_mode): Handle numeric args.
1167 (vif_unpack_len_value,vif_unpack_len): New functions.
1168 (vif_insn_len): Call vif_unpack_len.
1171 Wed Mar 4 12:08:14 1998 Doug Evans <devans@canuck.cygnus.com>
1173 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
1175 Tue Mar 3 18:51:22 1998 Doug Evans <devans@seba.cygnus.com>
1177 * cgen-asm.in: Move insertion of generated routines to top of file.
1178 (insert_normal): Add prototype. Delete `shift' arg.
1179 * cgen-dis.in: Move insertion of generated routines to top of file.
1180 (extract_normal): Add prototype. Delete `shift' arg.
1181 (print_normal): Add prototype. Call CGEN_PRINT_NORMAL if defined.
1182 (print_keyword): Add prototype. Fix type of `attrs' arg.
1184 start-sanitize-vr4320
1185 Tue Mar 3 11:47:58 1998 Gavin Koch <gavin@cygnus.com>
1187 * mips-dis.c (_print_insn_mips) : Handle bfd_mach_mips4320.
1188 * mips-opc.c ("mac","dmac") : Added 4320 insns.
1191 Sat Feb 28 16:02:34 1998 Nick Clifton <nickc@cygnus.com>
1193 * arm-dis.c (print_insn_big_arm, print_insn_little_arm): Do not
1194 assume that info->symbols is non-empty.
1196 Sat Feb 28 12:19:05 1998 Richard Henderson <rth@cygnus.com>
1198 * alpha-opc.c (cvtqs) There is no such thing.
1199 (cvttq): Missing most of the /*d variants.
1201 start-sanitize-r5900
1202 Fri Feb 27 13:16:42 1998 Andrew Cagney <cagney@b1.cygnus.com>
1204 * mips-opc.c (r5900/madd.s): Takes three operands, not four. Fix
1206 (r5900/min.s): Incorrect opcode ....,101001 not ...110000.
1207 (r5900/msub.s): Takes three operands, not four. Fix opcode.
1210 Thu Feb 26 15:53:09 1998 Michael Meissner <meissner@cygnus.com>
1212 * d30v-opc.c (d30v_opcode_table): Indicate which instructions are
1213 delayed branches or jumps.
1216 Fri Feb 27 10:04:19 1998 Doug Evans <devans@canuck.cygnus.com>
1218 * dvp-opc.c (vif_operands): Add unpack[u] support.
1219 (vif_opcodes): Ditto.
1220 (*_vif_imrubits): Renamed from *_vif_imrbits.
1222 Wed Feb 25 00:27:44 1998 Doug Evans <devans@canuck.cygnus.com>
1224 * dvp-dis.c (print_insn): Handle word number.
1225 Handle mips address vs vu address.
1226 * dvp-opc.c (vif_operands): Use DVP_OPERAND_VU_ADDRESS.
1227 (dma_operands): Use DVP_OPERAND_MIPS_ADDRESS.
1228 ({insert,extract}_dma_addr): Fix word ofset.
1229 ({insert,print}_gif_regs): Fix encode/decode.
1232 Tue Feb 24 10:46:44 1998 Doug Evans <devans@canuck.cygnus.com>
1234 * arm-dis.c (print_insn_{big,little}_arm): info->symbol changed
1236 * mips-dis.c (print_insn_{big,little}_mips): Likewise.
1237 * tic30-dis.c (print_branch): Likewise.
1239 * mips-dis.c (print_insn_little_mips): Call dvp_info_mach_type.
1240 * dvp-dis.c (dvp_info_mach_type): New function.
1241 (print_insn_dvp): Call it.
1242 (print_vif): Return length of 4 if mpg or direct insn so following
1243 insns get properly disabled.
1244 (print_gif): Fix word order.
1245 * dvp-opc.c (vif_insn_len): New argument `pcpu'. All callers updated.
1246 (gif_operands): Fix word order.
1247 (gif_opcodes): Likewise.
1248 ({insert,extract,print}_gif_regs): Likewise.
1249 (gif_regs): Add new register number/name changes.
1250 (dma_opcodes): Add dmarefe insn.
1253 Tue Feb 24 11:06:18 1998 Nick Clifton <nickc@cygnus.com>
1255 * arm-dis.c (print_insn_big_arm, print_insn_little_arm): Remove
1256 saved_symbol code as it is no longer needed.
1258 Mon Feb 23 13:16:17 1998 Doug Evans <devans@seba.cygnus.com>
1260 * cgen-asm.c: Include symcat.h.
1261 * cgen-dis.c,cgen-opc.c,cgen-asm.in,cgen-dis.in: Ditto.
1263 * m32r-asm.c,m32r-dis.c,m32r-opc.h,m32r-opc.c: Regenerate.
1266 Mon Feb 23 09:51:39 1998 Doug Evans <devans@canuck.cygnus.com>
1268 * dvp-opc.c (extra_dma_flags): Fix typos.
1269 (dma_operands): Fix word numbers.
1270 (dma_opcodes): Likewise.
1271 ({insert,extract}_dma_flags): Likewise.
1274 Mon Feb 23 10:34:58 1998 Jeffrey A Law (law@cygnus.com)
1276 * mips-dis.c (print_insn_arg): Do not prefix 'P' arguments with '$'.
1279 Fri Feb 20 18:02:20 1998 Doug Evans <devans@canuck.cygnus.com>
1281 * dvp-dis.c (print_gif): Complete.
1282 * dvp-opc.c (gif_operands,gif_opcodes): Complete.
1283 (state_gif_{nregs,regs,nloop}): New static locals.
1284 (*_gif_*): Complete.
1285 (dvp_opcode_init_{parse,print}): Init gif state locals.
1286 (extract_vif_datalen,{insert,extract}_vif_imrbits): New functions.
1287 (vif_insn_len): Handle `unpack'.
1288 ({insert,extract}_dma_flags): Complete.
1291 start-sanitize-r5900
1292 Fri Feb 20 01:23:16 1998 Jeffrey A Law (law@cygnus.com)
1294 * mips-opc.c (mula.s): Renamed from multa.s.
1297 Thu Feb 19 16:51:13 1998 Doug Evans <devans@canuck.cygnus.com>
1299 * m32r-opc.[ch]: Regenerate.
1302 Thu Feb 19 02:11:39 1998 Doug Evans <devans@charmed.cygnus.com>
1304 * dvp-opc.c (dma_operands): Rewrite.
1305 (dma_operand_{count,addr}): New globals.
1306 (dma_opcodes): Rewrite. Add "dmaend" with no operands.
1307 (insert_dma_addr): Insert value into insn.
1308 (extract_dma_addr): Extract value from insn.
1310 Wed Feb 18 15:46:46 1998 Doug Evans <devans@canuck.cygnus.com>
1312 * dvp-dis.c (print_vu): Handle loi insns.
1313 (print_insn): Likewise.
1314 * dvp-opc.c (vu_lower_opcodes): Add "loi".
1315 (vu_operands): Make LDEST1 a FAKE operand.
1316 (parse_dest1): Allow elided argument.
1317 (print_dest1): Don't print the argument.
1319 Tue Feb 17 18:48:25 1998 Doug Evans <devans@canuck.cygnus.com>
1321 * dvp-opc.c (parse_vfreg): Dest spec is optional.
1322 (print_vfreg): Don't print dest spec.
1323 (parse_accdest): Dest spec is optional.
1324 (print_accdest): Don't print dest spec.
1327 Tue Feb 17 17:14:50 1998 Doug Evans <devans@seba.cygnus.com>
1329 * Makefile.am (CGENFILES): Update.
1330 * Makefile.in: Regenerate.
1331 * cgen-asm.in (insert_normal): Result is error message now.
1332 Validate value to be inserted.
1333 (insert_insn_normal): Result is error message now.
1334 (@arch@_cgen_assemble_insn): Update.
1335 * cgen-asm.c (cgen_parse_{signed,unsigned}_integer): Delete min,max
1336 arguments. Don't perform validation here.
1337 * m32r-asm.c,m32r-dis.c,m32r-opc.c: Regenerate.
1339 Fri Feb 13 14:26:06 1998 Doug Evans <devans@canuck.cygnus.com>
1341 * cgen-opc.in (@arch@_cgen_get_insn_operands): Handle empty
1342 operand instance list.
1343 * m32r-opc.c: Regenerate.
1345 Fri Feb 13 14:53:02 1998 Ian Lance Taylor <ian@cygnus.com>
1347 * Makefile.am (AUTOMAKE_OPTIONS): Define.
1348 * configure, Makefile.in, aclocal.m4: Rebuild with automake 1.2e.
1350 Fri Feb 13 10:21:09 1998 Mark Alexander <marka@cygnus.com>
1352 * m10300-dis.c (print_insn_mn10300): Recognize break instruction.
1354 Fri Feb 13 13:12:14 1998 Ian Lance Taylor <ian@cygnus.com>
1356 * configure.in: Get the version number from BFD.
1357 * configure: Rebuild.
1359 From H.J. Lu <hjl@gnu.org>:
1360 * Makefile.am (libopcodes_la_LDFLAGS): Define.
1361 * Makefile.in: Rebuild.
1363 Fri Feb 13 09:50:32 1998 Nick Clifton <nickc@cygnus.com>
1365 * m32r-opc.c: Regenerate.
1366 * m32r-opc.h: Regenerate.
1368 Thu Feb 12 11:01:40 1998 Doug Evans <devans@canuck.cygnus.com>
1370 * cgen-opc.in (@arch@_cgen_lookup_insn): New argument alias_p.
1371 Ignore ALIAS insns if asked to.
1372 (@arch@_cgen_get_insn_operands): Pass 0 for alias_p, NULL for insn.
1373 * m32r-opc.c: Regenerate.
1376 * dvp.opc.c: Nicely format opcode tables.
1377 (vu_operands): New element UFLAGS.
1378 (parse_uflags,print_uflags): New functions.
1379 (vu_upper_opcodes): Add UFLAGS to all insns.
1382 Thu Feb 12 03:41:00 1998 J"orn Rennecke <amylaar@cygnus.co.uk>
1384 Fix rac to accept only a0:
1385 * d10v-opc.c (d10v_predefined_registers, d10v_operands, d10v_opcodes):
1386 Split OPERAND_ACC into OPERAND_ACC0 and OPERAND_ACC1.
1387 Introduce OPERAND_GPR.
1388 * d10v-dis.c (print_operand): Likewise.
1390 Wed Feb 11 18:58:34 1998 Doug Evans <devans@seba.cygnus.com>
1392 * cgen-opc.in: New file.
1393 * cgen.sh: Translate @ARCH@. Cat cgen-opc.in into @arch@-opc.c.
1394 * Makefile.am (CGENFILES): Add cgen-opc.in.
1395 * Makefile.in: Regenerate.
1397 * cgen-opc.c (cgen_set_cpu): Delete init of hw list `next' chain.
1398 (cgen_hw_lookup): Make result const.
1400 * cgen-dis.in (*): Use PTR instead of void *.
1401 (print_insn): Delete unused vars `i', `syntax'.
1403 * m32r-opc.h, m32r-opc.c, m32r-asm.c, m32r-dis.c: Regenerate.
1406 Tue Feb 10 14:56:24 1998 Doug Evans <devans@canuck.cygnus.com>
1408 * dvp-opc.c (*): pke,gpuif renamed to vif,gif.
1409 (vif_opcodes): Update renamed insns.
1410 * dvp-dis.c (*): Likewise.
1413 Sat Feb 7 15:30:27 1998 Ian Lance Taylor <ian@cygnus.com>
1415 * configure, aclocal.m4: Rebuild with new libtool.
1417 Thu Feb 5 17:56:10 1998 Michael Meissner <meissner@cygnus.com>
1419 * d30v-opc.c (repeat{,i} instructions): Repeat/repeati
1420 instructions use a PC relative branch, not absolute.
1422 Wed Feb 4 19:17:37 1998 Ian Lance Taylor <ian@cygnus.com>
1424 * configure.in: Set libtool_enable_shared rather than
1425 libtool_shared. Remove diversion hack.
1426 * configure, Makefile.in, aclocal.m4: Rebuild with new libtool.
1428 Tue Feb 3 17:19:40 1998 Doug Evans <devans@seba.cygnus.com>
1430 * cgen-opc.c (cgen_set_cpu): Initialize hardware table.
1431 * m32r-opc.h, m32r-opc.c, m32r-asm.c, m32r-dis.c: Regenerate.
1433 Mon Feb 2 19:22:15 1998 Steve Haworth <steve@pm.cse.rmit.EDU.AU>
1435 * tic30-dis.c: New file.
1436 * disassemble.c (disassembler): Add bfd_arch_tic30 case.
1437 * configure.in: Handle bfd_tic30_arch.
1438 * Makefile.am: Rebuild dependencies.
1439 (CFILES): Add tic30-dis.c
1440 (ALL_MACHINES): Add tic30-dis.lo.
1441 * configure, Makefile.in: Rebuild.
1443 start-sanitize-m32rx
1444 Mon Feb 2 11:04:08 1998 Nick Clifton <nickc@cygnus.com>
1446 * m32r-opc.c, m32r-opc.h, m32r-asm.c m32r-dis.c: Newly generated
1447 versions after updates to m32r.cpu to remove mulwhi-a, mulwlo-a,
1448 macwhi-a and macwlo-a instructions.
1452 Fri Jan 30 17:39:21 1998 Ian Carmichael <iancarm@cygnus.com>
1454 * dvp-opc.c, fixed encoding of a bunch of instructions to
1455 be consistent with the asmvu assembler (and inconsistent
1456 with the specification).
1458 Thu Jan 29 18:14:56 1998 Ian Carmichael <iancarm@cygnus.com>
1460 * dvp-opc.c, fixed order of pkemscal/pkemscalf instructions
1461 in the opcode table. The pkemscalf instruction must come first.
1463 Thu Jan 29 16:47:24 1998 Ian Carmichael <iancarm@cygnus.com>
1465 * dvp-opc.c, MAXIi should be VUOP6(0x1d) instead of 0x2d.
1468 Thu Jan 29 13:02:56 1998 Doug Evans <devans@canuck.cygnus.com>
1470 * m32r-opc.h (HAVE_CPU_M32R): Define.
1473 Wed Jan 28 13:46:19 1998 Doug Evans <devans@canuck.cygnus.com>
1475 * dvp-dis.c, dvp-opc.c: New files.
1476 * configure.in: Compile them if bfd_dvp_arch, as well as mips.
1477 * configure: Regenerate.
1478 * Makefile.am (ALL_MACHINES): Add dvp-{dis,opc}.lo.
1479 (dvp-dis.lo,dvp-opc.lo): Add rules for.
1480 (mips-dis.lo): Compile with @archdefs@.
1481 * Makefile.in: Regenerate.
1482 * disassemble.c: Define ARCH_mips ifdef ARCH_dvp.
1483 * mips-dis.c (print_insn_little_mips): Check for DVP insns.
1486 Wed Jan 28 09:55:03 1998 Nick Clifton <nickc@cygnus.com>
1488 * v850-opc.c (insertion routines): If both alignment and size is
1489 wrong then report this.
1491 Tue Jan 27 21:52:59 1998 Jeffrey A Law (law@cygnus.com)
1493 * mips-dis.c (_print_insn_mips): Set target_processor as appropriate.
1494 Only recognize instructions for the current target_processor.
1496 Thu Jan 22 16:20:17 1998 Fred Fish <fnf@cygnus.com>
1498 * d10v-dis.c (PC_MASK): Correct value.
1499 (print_operand): If there's a reloc, don't calculate the
1500 address because they could be in different sections.
1502 start-sanitize-cygnus
1503 Thu Jan 22 16:10:32 1998 Doug Evans <devans@seba.cygnus.com>
1505 * cgen.sh: Rewrite to be like simulator's version.
1506 * Makefile.am (cgen): Update call to cgen.sh.
1507 * Makefile.in: Regenerate
1510 Fri Jan 16 15:29:11 1998 Jim Blandy <jimb@zwingli.cygnus.com>
1512 * mips-opc.c (mips_builtin_opcodes): Move 4010's "addciu"
1513 instruction after the 4650's "mul" instruction; nobody's using the
1514 4010 these days. If object files someday indicate which processor
1515 variant they're intended for, we can do a better job at this.
1517 start-sanitize-r5900
1518 Tue Jan 13 09:21:56 1998 Jeffrey A Law (law@cygnus.com)
1520 * mips-opc.c (c.lt.s): Add r5900 variant.
1524 Mon Jan 12 14:43:54 1998 Doug Evans <devans@seba.cygnus.com>
1526 * cgen-asm.c (build_asm_hash_table): Traverse compiled in table using
1527 table provided entry size. Use CGEN_INSN_MNEMONIC.
1528 (cgen_parse_keyword): Rewrite.
1529 * cgen-dis.c (build_dis_hash_table): Traverse compiled in table using
1530 table provided entry size. Use CGEN_INSN_MASK_BITSIZE.
1531 * cgen-opc.c: Clean up pass over `struct foo' usage.
1532 (cgen_keyword_lookup_value): Handle "" entry.
1533 (cgen_keyword_add): Likewise.
1534 start-sanitize-cygnus
1535 * Makefile.am: Add cgen support.
1536 * Makefile.in: Regenerate.
1537 * configure.in: Add cgen support.
1538 * configure: Regenerate.
1539 * aclocal.m4: Regenerate.
1540 * cgen.sh, cgen-asm.in, cgen-dis.in: New files.
1543 Mon Dec 22 12:37:06 1997 Ian Lance Taylor <ian@cygnus.com>
1545 * mips-opc.c: Add FP_D to s.d instruction flags.
1547 Wed Dec 17 11:38:29 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1549 * m68k-opc.c (halt, pulse): Enable them on the 68060.
1551 start-sanitize-tic80
1552 Tue Dec 16 15:22:53 1997 Fred Fish <fnf@cygnus.com>
1554 * tic80-opc.c (tic80_opcodes): Revert change that put the 32 bit
1555 PC relative offset forms before the 15 bit forms. An assembler command
1556 line option now chooses the default.
1559 start-sanitize-r5900
1560 Tue Dec 16 13:24:22 1997 Jeffrey A Law (law@cygnus.com)
1562 * mips-opc.c: Add many missing r5900 instructions.
1565 Tue Dec 16 15:22:51 1997 Michael Meissner <meissner@cygnus.com>
1567 * d30v-opc.c (d30v_opcode_table): Set new flags bits
1568 FLAG_{2WORD,MUL{16,32},ADDSUBppp}, in appropriate instructions.
1570 1997-12-15 Brendan Kehoe <brendan@lisa.cygnus.com>
1572 * configure: Only build libopcodes shared if --enable-shared's value
1573 was `yes', or was set to `*opcodes*'.
1574 * aclocal.m4: Likewise.
1575 * NOTE: this really needs to be fixed in libtool/libtool.m4, the
1576 original source of this bit of code. It's not clear what the best fix
1579 start-sanitize-r5900
1580 Mon Dec 15 12:43:36 1997 Jeffrey A Law (law@cygnus.com)
1582 * mips-opc.c (mtpc, mfpc, mtps, mfps): Add r5900 variants.
1584 start-sanitize-tic80
1585 Fri Dec 12 11:57:04 1997 Fred Fish <fnf@cygnus.com>
1587 * tic80-opc.c (OFF_SL_PC, OFF_SL_BR): Minor formatting change.
1588 (tic80_opcodes): Reorder table entries to put the 32 bit PC relative
1589 offset forms before the 15 bit forms, to default to the long forms.
1592 Fri Dec 12 01:32:30 1997 Richard Henderson <rth@cygnus.com>
1594 * alpha-opc.c (cvttq/*u*): Remove, as that suffix is invalid.
1596 Wed Dec 10 17:42:35 1997 Nick Clifton <nickc@cygnus.com>
1598 * arm-dis.c (print_insn_little_arm): Prevent examination of stored
1599 symbol if none is present.
1600 (print_insn_big_arm): Prevent examination of stored symbol if
1603 Thu Oct 23 21:13:37 1997 Fred Fish <fnf@cygnus.com>
1605 * d10v-opc.c (d10v_opcodes): Correct entry for RTE.
1607 Mon Dec 8 11:21:07 1997 Nick Clifton <nickc@cygnus.com>
1609 * disassemble.c: Remove disasm_symaddr() function.
1611 * arm-dis.c: Use info->symbol instead of info->flags to determine
1612 if disassmbly should be in Thumb or Arm mode.
1614 Tue Dec 2 09:54:27 1997 Nick Clifton <nickc@cygnus.com>
1616 * arm-dis.c: Add support for disassembling Thumb opcodes.
1617 (print_insn_thumb): New function.
1619 * disassemble.c (disasm_symaddr): New function.
1621 * arm-opc.h: Display nop pseudo ops alongside equivalent disassembly.
1622 (thumb_opcodes): Table of Thumb opcodes.
1624 Mon Dec 1 12:25:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1626 * m68k-opc.c (btst): Change Dd@s to Dd;b.
1628 * m68k-dis.c (print_insn_arg): Recognize 'm', 'n', 'o', 'p', 'q',
1629 and 'v' as operand types.
1631 Mon Dec 1 11:56:50 1997 Ian Lance Taylor <ian@cygnus.com>
1633 * m68k-opc.c: Add argument for lpstop. From Olivier Carmona
1634 <olivier.carmona@di.epfl.ch>.
1635 * m68k-dis.c (print_insn_m68k): Handle special case of lpstop,
1636 which has a two word opcode with a one word argument.
1638 Sun Nov 23 22:25:21 1997 Michael Meissner <meissner@cygnus.com>
1640 * d30v-opc.c (d30v_opcode_table, case cmpu): Immediate field is
1641 unsigned, not signed.
1642 (d30v_format_table): Add SHORT_CMPU cases for cmpu.
1644 Wed Nov 19 17:42:35 1997 Richard Henderson <rth@cygnus.com>
1646 * sh-dis.c (print_insn_shx): Recognize all sh4 additions.
1647 * sh-opc.h (fmov): Add @<REG_M>+,<DX_REG_N> variant for sh4.
1648 (ftrv): Slay the cut-and-paste monster.
1650 Tue Nov 18 23:10:03 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1652 * d10v-dis.c (print_operand):
1653 Split OPERAND_FLAG into OPERAND_FFLAG and OPERAND_CFLAG.
1655 Tue Nov 18 18:45:14 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1657 * d10v-opc.c (OPERAND_FLAG): Split into:
1658 (OPERAND_FFLAG, OPERAND_CFLAG) .
1662 Thu Nov 13 11:05:33 1997 Gavin Koch <gavin@cygnus.com>
1664 * mips-opc.c: Move the INSN_MACRO ISA value to the membership
1665 field for all INSN_MACRO's.
1666 * mips16-opc.c: same
1668 Wed Nov 12 10:16:57 1997 Gavin Koch <gavin@cygnus.com>
1670 * mips-opc.c (sync,cache): These are 3900 insns.
1672 Tue Nov 11 23:53:41 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1674 sh-opc.h (sh_table): Remove ftst/nan.
1676 start-sanitize-cygnus
1677 Mon Nov 3 13:23:15 1997 Ken Raeburn <raeburn@cygnus.com>
1679 * mips-opc.c (dror32, dror, rzu.ob): Fix bugs in encoding.
1680 (c.*.ob, mula.ob, mull.ob, muls.ob, mulsl.ob): Put 'k' version
1682 * mips-dis.c (print_insn_arg): Handle VR5400 operand types.
1686 Wed Oct 29 15:10:56 1997 Gavin Koch <gavin@cygnus.com>
1688 * mips-opc.c (deret,dmult,dmultu,madd,maddu,pref,sdbbp):
1689 Add tx49 insns and configury.
1692 Tue Oct 28 17:59:32 1997 Ken Raeburn <raeburn@cygnus.com>
1694 * mips-opc.c (ffc, ffs): Fix mask.
1696 Tue Oct 28 16:34:54 1997 Michael Meissner <meissner@cygnus.com>
1698 * d30v-opc.c (pre_defined_registers): Add eit_vb, int_s, and int_m
1701 Mon Oct 27 22:34:03 1997 Ken Raeburn <raeburn@cygnus.com>
1703 * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
1704 start-sanitize-cygnus
1705 Added VR5400 instructions.
1706 (N5): New cpu-id macro.
1708 (WR_HILO, RD_HILO, MOD_HILO): New macros.
1710 Mon Oct 27 22:34:03 1997 Ken Raeburn <raeburn@cygnus.com>
1712 * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
1713 (WR_HILO, RD_HILO, MOD_HILO): New macros.
1715 Thu Oct 23 14:57:58 1997 Nick Clifton <nickc@cygnus.com>
1717 * v850-dis.c (disassemble): Replace // with /* ... */
1719 Wed Oct 22 17:33:21 1997 Richard Henderson <rth@cygnus.com>
1721 * sparc-opc.c: Add wr & rd for v9a asr's.
1722 * sparc-dis.c (print_insn_sparc): Recognize '_' and '/' for v9a asr's.
1723 (v9a_asr_reg_names): New variable.
1724 Patch from David Miller <davem@vger.rutgers.edu>.
1726 Wed Oct 22 17:18:02 1997 Richard Henderson <rth@cygnus.com>
1728 * sparc-opc.c (v9notv9a): New insn type.
1729 (IMPDEP): Move to the end to not conflict with edge8 et al.
1730 Patch from David Miller <davem@vger.rutgers.edu>.
1732 Fri Oct 17 13:18:53 1997 Gavin Koch <gavin@cygnus.com>
1734 * mips-opc.c (bnezl,beqzl): Mark these as also tx39.
1736 Thu Oct 16 11:55:20 1997 Gavin Koch <gavin@cygnus.com>
1738 * mips-opc.c: Note that 'jalx' is (probably incorrectly) marked I1.
1740 Tue Oct 14 16:10:31 1997 Nick Clifton <nickc@cygnus.com>
1742 * v850-dis.c (disassemble): Use new symbol_at_address_func() field
1743 of disassemble_info structure to determine if an overlay address
1744 has a matching symbol in low memory.
1746 * dis-buf.c (generic_symbol_at_address): New (dummy) function for
1747 new symbol_at_address_func field in disassemble_info structure.
1749 Fri Oct 10 16:44:52 1997 Nick Clifton <nickc@cygnus.com>
1751 * v850-opc.c (extract_d22): Use signed arithmatic.
1753 Tue Oct 7 23:40:43 1997 Gavin Koch <gavin@cygnus.com>
1755 * mips-opc.c: Three op mult is not an ISA insn.
1757 Tue Oct 7 23:37:21 1997 Gavin Koch <gavin@cygnus.com>
1759 * mips-opc.c: Fix formatting.
1761 Fri Oct 3 17:26:54 1997 Ian Lance Taylor <ian@cygnus.com>
1763 * i386-dis.c (OP_E): Explicitly sign extend 8 bit values, rather
1764 than assuming that char is signed. Explicitly sign extend 16 bit
1765 values, rather than assuming that short is 16 bits.
1766 (OP_sI, OP_J, OP_DIR): Likewise.
1768 start-sanitize-v850e
1769 Thu Oct 2 13:36:45 1997 Nick Clifton <nickc@cygnus.com>
1771 * v850-dis.c (v850_sreg_names): Use symbolic names for higher
1775 Wed Oct 1 16:58:54 1997 Nick Clifton <nickc@cygnus.com>
1777 * v850-opc.c: Fix typo in comment.
1779 * v850-dis.c (disassemble): Add test of processor type when
1780 determining opcodes.
1782 Wed Oct 1 14:10:20 1997 Ian Lance Taylor <ian@cygnus.com>
1784 * configure.in: Use a diversion to set enable_shared before the
1785 arguments are parsed.
1786 * configure: Rebuild.
1788 Thu Sep 25 13:04:59 1997 Ian Lance Taylor <ian@cygnus.com>
1790 * m68k-opc.c (TBL1): Use ! rather than `.
1791 * m68k-dis.c (print_insn_arg): Remove ` operand specifier.
1793 Wed Sep 24 11:29:35 1997 Ian Lance Taylor <ian@cygnus.com>
1795 * m68k-opc.c: Correct bchg, bclr, bset, and btst on ColdFire.
1797 * m68k-opc.c: Accept tst{b,w,l} with immediate operands on cpu32.
1799 * m68k-opc.c: Correct movew of an immediate operand to %sr or %ccr
1802 * configure.in: Call AC_CHECK_TOOL before AM_PROG_LIBTOOL.
1803 * aclocal.m4: Rebuild with new libtool.
1804 * configure: Rebuild.
1806 start-sanitize-v850e
1807 Fri Sep 19 11:45:49 1997 Andrew Cagney <cagney@b1.cygnus.com>
1809 * v850-opc.c ("cmov"): Order reg param r1, r2 not r2, r2.
1812 Thu Sep 18 11:21:43 1997 Doug Evans <dje@canuck.cygnus.com>
1814 * sparc-opc.c (sparclet_cpreg_table): Add %ccsr2, %cccrr, %ccrstr.
1816 Tue Sep 16 15:18:20 1997 Nick Clifton <nickc@cygnus.com>
1818 * v850-opc.c (v850_opcodes): Further rearrangements.
1820 Tue Sep 16 16:12:11 1997 Ken Raeburn <raeburn@cygnus.com>
1822 * d30v-opc.c (rot2h, sra2h, srl2h insns): Revert last change.
1824 Tue Sep 16 09:48:50 1997 Nick Clifton <nickc@cygnus.com>
1826 * v850-opc.c (v850_opcodes): Fields reordered to allow assembler
1829 Tue Sep 16 10:01:00 1997 Gavin Koch <gavin@cygnus.com>
1831 * mips-opc.c: Added tx39 insns sdbbp, rfe, and deret.
1833 * mips16-opc.c: Added mips16 sdbbp.
1836 Mon Sep 15 18:31:52 1997 Nick Clifton <nickc@cygnus.com>
1838 * v850-opc.c: Initialise processors field of v850_opcode structure.
1840 Wed Aug 27 21:42:39 1997 Ken Raeburn <raeburn@cygnus.com>
1842 Merge changes from Martin Hunt:
1844 * d30v-opc.c: Change mvfacc to accept 6-bit unsigned values.
1846 * d30v-opc.c (pre_defined_registers): Add control registers from 0-63.
1847 (d30v_opcode_tabel): Add dbt, rtd, srah, and srlh instructions. Fix
1848 rot2h, sra2h, and srl2h to use new SHORT_A5S format.
1850 * d30v-dis.c (print_insn): Fix disassembly of SHORT_D2 opcodes.
1852 * d30v-dis.c (print_insn): First operand of d*i (delayed
1853 branch) instructions is relative.
1855 * d30v-opc.c (d30v_opcode_table): Change form for repeati.
1856 (d30v_operand_table): Add IMM6S3 type.
1857 (d30v_format_table): Change SHORT_D2. Add LONG_Db.
1859 * d30v-dis.c: Fix bug with ".s" and ".l" extensions
1860 and cmp instructions.
1862 * d30v-opc.c: Correct entries for repeat*, and sat*.
1863 Make IMM5 unsigned. Create IMM6U and IMM12S3U operand
1864 types. Correct several formats.
1866 * d30v-opc.c: (pre_defined_registers): Add dpsw and dpc.
1868 * d30v-opc.c (pre_defined_registers): Change control registers.
1870 * d30v-opc.c (d30v_format_table): Correct SHORT_C1 and
1871 SHORT_C2. Manual was incorrect.
1873 * d30v-dis.c (lookup_opcode): Return value now indicates
1874 if an opcode has a short and a long form. Used for deciding
1875 to append a ".s" or ".l".
1876 (print_insn): Append a ".s" to an instruction if it is
1877 the short form and ".l" if it is a long form. Do not append
1878 anything if the instruction has only one possible size.
1880 * d30v-opc.c: Change mulx2h to require an even register.
1881 New form: SHORT_A2; a SHORT_A form that needs an even
1882 register as the first operand.
1884 * d30v-dis.c (print_insn_d30v): Fix problem where the last
1885 instruction was not being disassembled if there were an odd
1886 number of instructions.
1888 * d30v-opc.c (SHORT_M2, LONG_M2): Two new forms.
1890 start-sanitize-v850e
1891 Fri Sep 12 11:43:54 1997 Nick Clifton <nickc@cygnus.com>
1893 * v850-dis.c (disassemble): Improved display of register lists.
1896 Thu Sep 11 17:35:10 1997 Doug Evans <dje@canuck.cygnus.com>
1898 * sparc-opc.c (sparc_opcodes): Fix assembler args to
1899 fzeros, fones, fsrc1, fsrc1s, fsrc2s, fnot1, fnot1s, fnot2s,
1900 fors, fnors, fands, fnands, fxors, fxnors, fornot1s, fornot2s,
1901 fandnot1s, fandnot2s.
1903 Tue Sep 9 10:03:49 1997 Doug Evans <dje@canuck.cygnus.com>
1905 * sparc-opc.c (sparc_opcodes): Fix op3 field for fcmpq/fcmpeq.
1907 Mon Sep 8 14:06:59 1997 Doug Evans <dje@canuck.cygnus.com>
1909 * cgen-asm.c (cgen_parse_address): New argument resultp.
1910 All callers updated.
1911 * m32r-asm.c (parse_h_hi16): Right shift numbers by 16.
1913 Tue Sep 2 18:39:08 1997 Jeffrey A Law (law@cygnus.com)
1915 * mn10200-dis.c (disassemble): PC relative instructions are
1916 relative to the next instruction, not the current instruction.
1918 Tue Sep 2 15:41:55 1997 Nick Clifton <nickc@cygnus.com>
1920 * v850-dis.c (disassemble): Only signed extend values that are not
1921 returned by extract functions.
1922 Remove use of V850_OPERAND_ADJUST_SHORT_MEMORY flag.
1924 Tue Sep 2 15:39:40 1997 Nick Clifton <nickc@cygnus.com>
1926 * v850-opc.c: Update comments. Remove use of
1927 V850_OPERAND_ADJUST_SHORT_MEMORY. Fix several operand patterns.
1929 Tue Aug 26 09:42:28 1997 Nick Clifton <nickc@cygnus.com>
1931 * v850-opc.c (MOVHI): Immediate parameter is unsigned.
1933 Mon Aug 25 15:58:07 1997 Christopher Provenzano <proven@cygnus.com>
1935 * configure: Rebuilt with latest devo autoconf for NT support.
1937 Fri Aug 22 10:35:15 1997 Nick Clifton <nickc@cygnus.com>
1939 * v850-dis.c (disassemble): Use curly brace syntax for register
1942 * v850-opc.c (v850_opcodes[]): Add NOT_R0 flag to decect cases
1943 where r0 is being used as a destination register.
1945 start-sanitize-v850e
1946 Thu Aug 21 11:09:09 1997 Nick Clifton <nickc@cygnus.com>
1948 * v850-opc.c (v850_opcodes[]): Move divh opcodes next to each other.
1951 Wed Aug 20 00:43:11 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1953 * sh-opc.h (sh_arg_type): Add A_SGR and A_DBR.
1954 (sh_nibble_type, sh_arg_type): Add SH4 floating point extensions.
1955 (sh_table): Likewise. Add movca.l, ocbi, ocbp, ocbwb.
1956 Add insns to access SGR and DBR.
1957 * sh-dis.c (print_insn_shx): Add SH4 floating point extensions.
1959 Tue Aug 19 10:59:59 1997 Richard Henderson <rth@cygnus.com>
1961 * alpha-opc.c (alpha_opcodes): Fix hw_rei_stall mungage.
1963 start-sanitize-v850e
1964 Mon Aug 18 11:10:03 1997 Nick Clifton <nickc@cygnus.com>
1966 * v850-opc.c (v850_opcodes[]): Remove use of flag field.
1967 * v850-opc.c (v850_opcodes[]): Add support for reversed short load
1970 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
1972 * configure (cgen_files): Add support for v850e target.
1973 * configure.in (cgen_files): Add support for v850e target.
1975 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
1977 * configure (cgen_files): Add support for v850ea target.
1978 * configure.in (cgen_files): Add support for v850ea target.
1981 Fri Aug 15 05:17:48 1997 Doug Evans <dje@canuck.cygnus.com>
1983 * configure.in (bfd_arc_arch): Add.
1984 * configure: Rebuild.
1985 * Makefile.am (ALL_MACHINES): Add arc-dis.lo, arc-opc.lo.
1986 * Makefile.in: Rebuild.
1987 * arc-dis.c, arc-opc.c: New files.
1988 * disassemble.c (ARCH_all): Define ARCH_arc.
1989 (disassembler): Add ARC support.
1991 Wed Aug 13 18:52:11 1997 Nick Clifton <nickc@cygnus.com>
1993 start-sanitize-v850e
1994 * v850-dis.c (disassemble): Add support for v850EA instructions.
1996 * v850-opc.c (insert_i5div, extract_i5div): New Functions.
1997 (v850_opcodes): Add v850EA instructions.
1999 * v850-dis.c (disassemble): Add support for v850E instructions.
2001 * v850-opc.c (insert_d5_4, extract_d5_4, insert_d16_16,
2002 extract_d16_16, insert_i9, extract_i9, insert_u9, extract_u9,
2003 insert_spe, extract_spe): New Functions.
2004 (v850_opcodes): Add v850E instructions.
2007 * v850-opc.c: Reorganised and re-layed out to improve readability
2010 Tue Aug 5 23:09:31 1997 Ian Lance Taylor <ian@cygnus.com>
2012 * configure: Rebuild with autoconf 2.12.1.
2014 Mon Aug 4 12:02:16 1997 Ian Lance Taylor <ian@cygnus.com>
2016 * aclocal.m4, configure: Rebuild with new automake patches.
2018 Fri Aug 1 13:02:04 1997 Ian Lance Taylor <ian@cygnus.com>
2020 * configure.in: Set enable_shared before AM_PROG_LIBTOOL.
2021 * acinclude.m4: Just include acinclude.m4 from BFD.
2022 * aclocal.m4, configure: Rebuild.
2024 Thu Jul 31 21:44:42 1997 Ian Lance Taylor <ian@cygnus.com>
2026 * Makefile.am: New file, based on old Makefile.in.
2027 * acconfig.h: New file.
2028 * acinclude.m4: New file.
2029 * stamp-h.in: New file.
2030 * configure.in: Call AM_INIT_AUTOMAKE and AM_PROG_LIBTOOL.
2031 Removed shared library handling; now handled by libtool. Replace
2032 AC_CONFIG_HEADER with AM_CONFIG_HEADER. Call AM_MAINTAINER_MODE,
2033 AM_CYGWIN32, and AM_EXEEXT. Replace AC_PROG_INSTALL with
2034 AM_PROG_INSTALL. Change all .o files to .lo. Remove stamp-h
2035 handling in AC_OUTPUT.
2036 * dep-in.sed: Change .o to .lo.
2037 * Makefile.in: Now built with automake.
2038 * aclocal.m4: Now built with aclocal.
2039 * config.in, configure: Rebuild.
2041 Mon Jul 28 21:52:24 1997 Jeffrey A Law (law@cygnus.com)
2043 * mips-opc.c: Fix typo/thinko in "eret" instruction.
2045 start-sanitize-r5900
2046 Mon Jul 28 22:07:14 1997 Andrew Cagney <cagney@b1.cygnus.com>
2048 * mips-opc.c: Fix coding of mtsa.
2051 Thu Jul 24 13:03:26 1997 Doug Evans <dje@canuck.cygnus.com>
2053 * sparc-opc.c (sparc_opcodes): Fix spelling on fpaddX, fpsubX insns.
2055 * sparc-dis.c (sorted_opcodes): New static local.
2056 (struct opcode_hash): `opcode' is pointer to const element.
2057 (build_hash): First arg is now table of sorted pointers.
2058 (print_insn_sparc): Sort opcodes by sorting table of pointers.
2059 (compare_opcodes): Update.
2061 Tue Jul 15 12:05:23 1997 Doug Evans <dje@canuck.cygnus.com>
2063 * cgen-opc.c: #include <ctype.h>.
2064 (hash_keyword_name): New arg `case_sensitive_p'. Callers updated.
2065 Handle case insensitive hashing.
2066 (hash_keyword_value): Change type of `value' to unsigned int.
2068 Thu Jul 10 12:56:10 1997 Jeffrey A Law (law@cygnus.com)
2070 * mips-opc.c (mips_builtin_opcodes): If an insn uses single
2071 precision FP, mark it as such. Likewise for double precision
2072 FP. Mark ISA1 insns. Consolidate duplicate opcodes where
2074 start-sanitize-r5900
2075 (mips_builtin_opcodes): Remove non-existant r5900 instructions
2078 start-sanitize-r5900
2079 Thu Jun 26 16:20:27 1997 Jeffrey A Law (law@cygnus.com)
2081 * mips-opc.c (mips_builtin_opcodes): Add "pinteh", "pexeh" and
2082 "pexew" as synonyms for "pintoh", "pexoh", "pexow".
2085 Wed Jun 25 15:25:57 1997 Felix Lee <flee@cirdan.cygnus.com>
2087 * ppc-opc.c (extract_nsi): make unsigned expression signed before
2089 (UNUSED): remove one level of parens, so MSVC doesn't choke on
2090 nesting depth when all the macros are expanded.
2092 Tue Jun 17 17:02:17 1997 Ian Lance Taylor <ian@cygnus.com>
2094 * sparc-opc.c: The fcmp v9a instructions take an integer register
2095 as a destination, not a floating point register. From Christian
2096 Kuehnke <Christian.Kuehnke@arbi.Informatik.Uni-Oldenburg.DE>.
2098 Mon Jun 16 14:13:18 1997 Ian Lance Taylor <ian@cygnus.com>
2100 * m68k-dis.c (print_insn_arg): Print case 7.2 using %pc@()
2101 syntax. From Roman Hodek
2102 <rnhodek@faui22c.informatik.uni-erlangen.de>.
2104 * i386-dis.c (twobyte_has_modrm): Fix pand.
2106 Mon Jun 16 14:08:38 1997 Michael Taylor <mbt@mit.edu>
2108 * i386-dis.c (dis386_twobyte): Fix pand and pandn.
2110 Tue Jun 10 11:26:47 1997 H.J. Lu <hjl@gnu.ai.mit.edu>
2112 * arm-dis.c: Add prototypes for arm_decode_shift and
2115 Mon Jun 2 11:39:04 1997 Gavin Koch <gavin@cygnus.com>
2117 * mips-opc.c: Add r3900 insns.
2119 Tue May 27 15:55:44 1997 Ian Lance Taylor <ian@cygnus.com>
2121 * sh-dis.c (print_insn_shx): Change relmask to bfd_vma. Don't
2122 print delay slot instructions on the same line. When using a PC
2123 relative load, add a comment with the value being loaded if it can
2126 Tue May 27 11:02:08 1997 Alan Modra <alan@spri.levels.unisa.edu.au>
2128 * i386-dis.c (dis386[], dis386_twobyte[]): change pushl/popl
2129 to pushS/popS for segment regs and byte constant so that
2130 pushw/popw printed when in 16 bit data mode.
2132 * i386-dis.c (dis386[]): change cwtl, cltd to cWtS, cStd to
2133 print cbtw, cwtd in 16 bit data mode.
2134 * i386-dis.c (putop): extra case W to support above.
2136 * i386-dis.c (print_insn_x86): print addr32 prefix when given
2137 address size prefix in 16 bit address mode.
2139 Fri May 23 16:47:23 1997 Ian Lance Taylor <ian@cygnus.com>
2141 * sh-dis.c: Reindent. Rename local variable fprintf to
2144 Thu May 22 14:06:02 1997 Doug Evans <dje@canuck.cygnus.com>
2146 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Undo patch of May 2.
2148 Tue May 20 11:26:27 1997 Gavin Koch <gavin@cygnus.com>
2150 * mips-opc.c (mips_builtin_opcodes): Moved INSN_ISA field into new
2152 * mips16-opc.c (mip16_opcodes): same.
2154 Mon May 12 15:10:53 1997 Jim Wilson <wilson@cygnus.com>
2156 * m68k-opc.c (moveb): Change $d to %d.
2158 Mon May 5 14:28:41 1997 Ian Lance Taylor <ian@cygnus.com>
2160 * i386-dis.c: (dis386_twobyte): Add MMX instructions.
2161 (twobyte_has_modrm): Likewise.
2163 (OP_MMX, OP_EM, OP_MS): New static functions.
2165 * i386-dis.c: Revert patch of April 4. The output now matches
2168 Fri May 2 12:48:37 1997 Doug Evans <dje@canuck.cygnus.com>
2170 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Use $uimm16 instead
2173 Thu May 1 15:34:15 1997 Doug Evans <dje@canuck.cygnus.com>
2175 * m32r-opc.h (CGEN_ARCH): Renamed from CGEN_CPU.
2177 Tue Apr 15 12:40:08 1997 Ian Lance Taylor <ian@cygnus.com>
2179 * Makefile.in (install): Depend upon installdirs.
2180 (installdirs): New target.
2182 Mon Apr 14 12:13:51 1997 Ian Lance Taylor <ian@cygnus.com>
2184 From Thomas Graichen <graichen@rzpd.de>:
2185 * configure.in: Use ${CONFIG_SHELL} when running $ac_config_sub.
2186 * configure: Rebuild.
2188 Sun Apr 13 17:50:41 1997 Doug Evans <dje@canuck.cygnus.com>
2190 * cgen-*.c, m32r-*.c: #include sysdep.h instead of config.h.
2191 Delete string{,s}.h support.
2193 Thu Apr 10 14:44:56 1997 Doug Evans <dje@canuck.cygnus.com>
2195 * cgen-asm.c (cgen_parse_operand_fn): New global.
2196 (cgen_parse_{{,un}signed_integer,address}): Update call to
2197 cgen_parse_operand_fn.
2198 (cgen_init_parse_operand): New function.
2199 * m32r-asm.c (parse_insn_normal): cgen_init_parse_operand renamed
2200 from cgen_asm_init_parse.
2201 (m32r_cgen_assemble_insn): New operand `errmsg'.
2202 Delete call to as_bad, return error message to caller.
2203 (m32r_cgen_asm_hash_keywords): #if 0 out.
2205 Wed Apr 9 12:05:25 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2207 * m68k-dis.c (print_insn_arg) [case 'd']: Print as address register,
2209 [case 'J']: Fix typo in register name.
2211 Mon Apr 7 16:48:22 1997 Ian Lance Taylor <ian@cygnus.com>
2213 * configure.in: Substitute SHLIB_LIBS.
2214 * configure: Rebuild.
2215 * Makefile.in (SHLIB_LIBS): New variable.
2216 ($(SHLIB)): Use $(SHLIB_LIBS).
2218 Mon Apr 7 11:45:44 1997 Doug Evans <dje@canuck.cygnus.com>
2220 * cgen-dis.c (build_dis_hash_table): Fix xmalloc size computation.
2222 * cgen-opc.c (hash_keyword_name): Improve algorithm.
2224 * disassemble.c (disassembler): Handle m32r.
2226 Fri Apr 4 12:29:38 1997 Doug Evans <dje@canuck.cygnus.com>
2228 * m32r-asm.c, m32r-dis.c, m32r-opc.c, m32r-opc.h: New files.
2229 * cgen-asm.c, cgen-dis.c, cgen-opc.c: New files.
2230 * Makefile.in (CFILES): Add them.
2231 (ALL_MACHINES): Add them.
2232 (dependencies): Regenerate.
2233 * configure.in (cgen_files): New variable.
2234 (bfd_m32r_arch): Add entry.
2235 * configure: Regenerate.
2237 Fri Apr 4 14:04:16 1997 Ian Lance Taylor <ian@cygnus.com>
2239 * configure.in: Correct file names for bfd_mn10[23]00_arch.
2240 * configure: Rebuild.
2242 * Makefile.in: Rebuild dependencies.
2244 * d10v-dis.c: Include "ansidecl.h" before "opcode/d10v.h".
2246 * i386-dis.c (float_reg): Swap fsubrp and fsubp. Swap fdivrp and
2249 Thu Apr 3 13:22:45 1997 Ian Lance Taylor <ian@cygnus.com>
2251 * Branched binutils 2.8.
2253 Wed Apr 2 12:23:53 1997 Ian Lance Taylor <ian@cygnus.com>
2255 * m10200-dis.c: Rename from mn10200-dis.c.
2256 * m10200-opc.c: Rename from mn10200-opc.c.
2257 * m10300-dis.c: Rename from mn10300-dis.c
2258 * m10300-opc.c: Rename from mn10300-opc.c.
2259 * Makefile.in: Update accordingly.
2261 * mips16-opc.c: Add mul and dmul macros.
2263 Tue Apr 1 16:27:45 1997 Klaus Kaempf <kkaempf@progis.de>
2265 * makefile.vms: Update CFLAGS, add clean target.
2267 Fri Mar 28 12:10:09 1997 Ian Lance Taylor <ian@cygnus.com>
2269 * mips-opc.c: Add "wait". From Ralf Baechle
2270 <ralf@gnu.ai.mit.edu>.
2272 * configure.in: Add stdlib.h to AC_CHECK_HEADERS list.
2273 * configure, config.in: Rebuild.
2274 * sysdep.h: Include <stdlib.h> if it exists.
2275 * sparc-dis.c: Include <stdio.h> and "sysdep.h". Don't include
2277 * Makefile.in: Rebuild dependencies.
2279 Thu Mar 27 14:24:43 1997 Ian Lance Taylor <ian@cygnus.com>
2281 * ppc-opc.c: Add PPC 403 instructions and extended opcodes. From
2282 Andrew Bray <andy@madhouse.demon.co.uk>.
2284 * mips-opc.c: Add cast when setting mips_opcodes.
2286 Tue Mar 25 23:04:00 1997 Stu Grossman (grossman@critters.cygnus.com)
2288 * v850-dis.c (disassemble): Fix sign extension problem.
2289 * v850-opc.c (extract_d*): Fix sign extension problems to make
2290 disassembly calculate branch offsets correctly.
2292 Mon Mar 24 13:22:13 1997 Ian Lance Taylor <ian@cygnus.com>
2294 * sh-opc.h: Add bf/s and bt/s as synonyms for bf.s and bt.s.
2296 * mips-opc.c: Add dctr and dctw.
2298 Sun Mar 23 18:08:10 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2300 * d30v-dis.c (print_insn): Change the way signed constants
2303 Fri Mar 21 14:37:52 1997 Ian Lance Taylor <ian@cygnus.com>
2305 * Makefile.in (BFD_H): New variable.
2306 (HFILES): New variable.
2307 (CFILES): Add all C files.
2308 (.dep, .dep1, dep.sed, dep, dep-in): New targets.
2309 Delete old dependencies, and build new ones.
2310 * dep-in.sed: New file.
2312 Thu Mar 20 19:03:30 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
2314 * m68k-opc.c (m68k_opcode_aliases): Added blo and blo{s,b,w,l}.
2316 start-sanitize-coldfire
2317 Wed Mar 19 06:53:58 1997 J.T. Conklin <jtc@rtl.cygnus.com>
2319 * m68k-opc.c (m68k_opcodes): Provide coldfire division module
2322 end-sanitize-coldfire
2323 Tue Mar 18 14:17:03 1997 Jeffrey A Law (law@cygnus.com)
2325 * mn10200-opc.c: Change "trap" to "syscall".
2326 * mn10300-opc.c: Add new "syscall" instruction.
2328 Mon Mar 17 08:48:03 1997 J.T. Conklin <jtc@beauty.cygnus.com>
2330 * m68k-opc.c (m68k_opcodes): Provide correct entries for mulsl and
2331 mulul insns on the coldfire.
2333 Sat Mar 15 17:13:05 1997 Ian Lance Taylor <ian@cygnus.com>
2335 * arm-dis.c (print_insn_arm): Don't print instruction bytes.
2336 (print_insn_big_arm): Set bytes_per_chunk and display_endian.
2337 (print_insn_little_arm): Likewise.
2339 Fri Mar 14 15:08:59 1997 Ian Lance Taylor <ian@cygnus.com>
2341 Based on patches from H.J. Lu <hjl@lucon.org>:
2342 * i386-dis.c (fetch_data): Add prototype.
2343 * m68k-dis.c (fetch_data): Add prototype.
2344 (dummy_print_address): Add prototype. Make static.
2345 * ppc-opc.c (valid_bo): Add prototype.
2346 * sparc-dis.c (build_hash_table): Add prototype.
2347 (is_delayed_branch, compute_arch_mask): Add prototypes.
2348 (print_insn_sparc): Make several local variables const.
2349 (compare_opcodes): Change arguments to const PTR. Add prototype.
2350 * sparc-opc.c (arg): Change name field to be const.
2351 (lookup_name, lookup_value): Add prototypes. Change table and
2352 name parameters to be const.
2353 (sparc_encode_asi): Change name parameter to be const.
2354 (sparc_encode_membar, sparc_encode_prefetch): Likewise.
2355 (sparc_encode_sparclet_cpreg): Likewise.
2356 (sparc_decode_asi): Change return type to be const.
2357 (sparc_decode_membar, sparc_decode_prefetch): Likewise.
2358 (sparc_decode_sparclet_cpreg): Likewise.
2360 Fri Mar 7 10:51:49 1997 Ian Lance Taylor <ian@cygnus.com>
2362 * Makefile.in ($(SHLINK)): Just use ln -s, not ln -sf, since
2363 Solaris doesn't like the combined options, and the -f is
2365 (stamp-tshlink, install): Likewise.
2367 Thu Mar 6 16:51:11 1997 Jeffrey A Law (law@cygnus.com)
2369 * mn10300-opc.c (IMM16_PCREL, SD8N_PCREL, D16_SHIFT): Mark these
2372 Tue Mar 4 06:10:36 1997 J.T. Conklin <jtc@cygnus.com>
2374 * m68k-opc.c (m68k_opcodes): Fix last change for the mc68010.
2376 Mon Mar 3 07:45:20 1997 J.T. Conklin <jtc@cygnus.com>
2378 * m68k-opc.c (m68k_opcodes): Added entries for the tst insns on
2381 Thu Feb 27 14:04:32 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
2383 * m68k-opc.c (m68k_opcodes): Added swbegl pseudo-instruction.
2385 start-sanitize-tic80
2386 Thu Feb 27 11:36:41 1997 Michael Meissner <meissner@cygnus.com>
2388 * tic80-dis.c (print_insn_tic80): Set info->bytes_per_line to 8.
2390 Wed Feb 26 15:34:48 1997 Michael Meissner <meissner@cygnus.com>
2392 * tic80-opc.c (tic80_predefined_symbols): Define r25 properly.
2395 Wed Feb 26 13:38:30 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2397 * m68k-dis.c (NEXTSINGLE, NEXTDOUBLE, NEXTEXTEND): Use
2398 floatformat_to_double to make portable.
2399 (print_insn_arg): Use NEXTEXTEND macro when extracting extended
2402 Mon Feb 24 19:26:12 1997 Dawn Perchik <dawn@cygnus.com>
2404 * mips-opc.c: Initialize mips_opcodes to mips_builtin_opcodes,
2405 and bfd_mips_num_opcodes to bfd_mips_num_builtin_opcodes.
2407 Mon Feb 24 15:19:01 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2409 * d10v-dis.c, d10v-opc.c: Change pre_defined_registers to
2410 d10v_predefined_registers and reg_name_cnt to d10v_reg_name_cnt.
2412 start-sanitize-tic80
2413 Mon Feb 24 14:33:26 1997 Fred Fish <fnf@cygnus.com>
2415 * tic80-opc.c (LSI_SCALED): Renamed from this ...
2416 (OFF_SL_BR_SCALED): ... to this, and added the flag
2417 TIC80_OPERAND_BASEREL to the flags word.
2418 (tic80_opcodes): Replace all occurances of LSI_SCALED with
2422 Sat Feb 22 21:25:00 1997 Dawn Perchik <dawn@cygnus.com>
2424 * mips-opc.c: Add macros for cop0, cop1 cop2 and cop3.
2425 Change mips_opcodes from const array to a pointer,
2426 and change bfd_mips_num_opcodes from const int to int,
2427 so that we can increase the size of the mips opcodes table
2430 start-sanitize-tic80
2431 Sat Feb 22 21:03:47 1997 Fred Fish <fnf@cygnus.com>
2433 * tic80-opc.c (tic80_predefined_symbols): Revert change to
2434 store BITNUM values in the table in one's complement form
2435 to match behavior when assembler is given a raw numeric
2436 value for a BITNUM operand.
2437 * tic80-dis.c (print_operand_bitnum): Ditto.
2440 Fri Feb 21 16:31:18 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2442 * d30v-opc.c: Removed references to FLAG_X.
2444 Wed Feb 19 14:51:20 1997 Ian Lance Taylor <ian@cygnus.com>
2446 * Makefile.in: Add dependencies on ../bfd/bfd.h as required.
2448 Tue Feb 18 17:43:43 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2450 * Makefile.in: Added d30v object files.
2451 * configure: (bfd_d30v_arch) Rebuilt.
2452 * configure.in: (bfd_d30v_arch) Added new case.
2453 * d30v-dis.c: New file.
2454 * d30v-opc.c: New file.
2455 * disassemble.c (disassembler) Add entry for d30v.
2457 start-sanitize-tic80
2458 Tue Feb 18 16:32:08 1997 Fred Fish <fnf@cygnus.com>
2460 * tic80-opc.c (tic80_predefined_symbols): Add symbolic
2461 representations for the floating point BITNUM values.
2463 Fri Feb 14 12:14:05 1997 Fred Fish <fnf@cygnus.com>
2465 * tic80-opc.c (tic80_predefined_symbols): Store BITNUM values
2466 in the table in one's complement form, as they appear in the
2468 (tic80_symbol_to_value): Use macros to access predefined
2470 (tic80_value_to_symbol): Ditto.
2471 (tic80_next_predefined_symbol): New function.
2472 * tic80-dis.c (print_operand_bitnum): Remove code that did
2473 one's complement for BITNUM values.
2476 start-sanitize-r5900
2477 Fri Feb 14 13:56:51 1997 Gavin Koch <gavin@cygnus.com>
2479 * mips-opc.c: bug fix, can't mark insns INSN_5900 and INSN_ISA4
2482 Thu Feb 13 21:56:51 1997 Klaus Kaempf <kkaempf@progis.de>
2484 * makefile.vms: Remove 8 bit characters. Update to latest
2487 Thu Feb 13 20:41:22 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
2489 * m68k-opc.c (m68k_opcodes): Add swbeg pseudo-instruction.
2491 Thu Feb 13 16:30:02 1997 Jeffrey A Law (law@cygnus.com)
2493 * mn10200-opc.c (IMM16_PCREL): This is a signed operand.
2494 (IMM24_PCREL): Likewise.
2496 Thu Feb 13 13:28:43 1997 Ian Lance Taylor <ian@cygnus.com>
2498 * mips-dis.c (print_mips16_insn_arg): Use memaddr - 2 as the base
2499 address for an extended PC relative instruction that is not a
2502 Wed Feb 12 12:27:40 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2504 * m68k-dis.c (print_insn_m68k): Set bytes_per_chunk and
2507 start-sanitize-tic80
2508 Tue Feb 11 16:36:31 1997 Fred Fish <fnf@cygnus.com>
2510 * tic80-opc.c (tic80_operands): Fix typo '+' -> '|'.
2511 (tic80_opcodes): Sort entries so that long immediate forms
2512 come after short immediate forms, making it easier for
2513 assembler to select the right one for a given operand.
2516 Tue Feb 11 15:26:47 1997 Ian Lance Taylor <ian@cygnus.com>
2518 * mips-dis.c (_print_insn_mips): Set bytes_per_chunk and
2520 (print_insn_mips16): Likewise.
2522 start-sanitize-r5900
2523 Fri Feb 7 11:12:44 1997 Gavin Koch <gavin@cygnus.com>
2525 * mips-opc.c: add r5900.
2528 start-sanitize-tic80
2529 Mon Feb 10 10:12:41 1997 Fred Fish <fnf@cygnus.com>
2531 * tic80-opc.c (tic80_symbol_to_value): Changed to accept
2532 a symbol class that restricts translation to just that
2533 class (general register, condition code, etc).
2535 Thu Feb 6 17:34:09 1997 Fred Fish <fnf@cygnus.com>
2537 * tic80-opc.c (tic80_operands): Add REG_0_E, REG_22_E,
2538 and REG_DEST_E for register operands that have to be
2539 an even numbered register. Add REG_FPA for operands that
2540 are one of the floating point accumulator registers.
2541 Add TIC80_OPERAND_MASK to flags for ENDMASK operand.
2542 (tic80_opcodes): Change entries that need even numbered
2543 register operands to use the new operand table entries.
2544 Add "or" entries that are identical to "or.tt" entries.
2547 Wed Feb 5 11:12:44 1997 Ian Lance Taylor <ian@cygnus.com>
2549 * mips16-opc.c: Add new cases of exit instruction for
2551 * mips-dis.c (print_mips16_insn_arg): Display floating point
2552 registers in operands of exit instruction. Print `$' before
2553 register names in operands of entry and exit instructions.
2555 start-sanitize-tic80
2556 Thu Jan 30 14:09:03 1997 Fred Fish <fnf@cygnus.com>
2558 * tic80-opc.c (tic80_predefined_symbols): Table of name/value
2559 pairs for all predefined symbols recognized by the assembler.
2560 Also used by the disassembling routines.
2561 (tic80_symbol_to_value): New function.
2562 (tic80_value_to_symbol): New function.
2563 * tic80-dis.c (print_operand_control_register,
2564 print_operand_condition_code, print_operand_bitnum):
2565 Remove private tables and use tic80_value_to_symbol function.
2568 Thu Jan 30 11:30:45 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2570 * d10v-dis.c (print_operand): Change address printing
2571 to correctly handle PC wrapping. Fixes PR11490.
2573 Wed Jan 29 09:39:17 1997 Jeffrey A Law (law@cygnus.com)
2575 * mn10200-opc.c (mn10200_operands): Make 8 and 16 bit pc-relative
2578 Tue Jan 28 15:57:34 1997 Ian Lance Taylor <ian@cygnus.com>
2580 * mips-dis.c (print_insn_mips16): Set insn_info information.
2581 (print_mips16_insn_arg): Likewise.
2583 * mips-dis.c (print_insn_mips16): Better handling of an extend
2584 opcode followed by an instruction which can not be extended.
2586 Fri Jan 24 12:08:21 1997 J.T. Conklin <jtc@cygnus.com>
2588 * m68k-opc.c (m68k_opcodes): Changed operand specifier for the
2589 coldfire moveb instruction to not allow an address register as
2590 destination. Although the documentation does not indicate that
2591 this is invalid, experiments uncovered unexpected behavior.
2592 Added a comment explaining the situation. Thanks to Andreas
2593 Schwab for pointing this out to me.
2595 start-sanitize-tic80
2596 Wed Jan 22 20:13:51 1997 Fred Fish <fnf@cygnus.com>
2598 * tic80-opc.c (tic80_opcodes): Expand comment to note that the
2599 entries are presorted so that entries with the same mnemonic are
2600 adjacent to each other in the table. Sort the entries for each
2601 instruction so that this is true.
2604 Mon Jan 20 12:48:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2606 * m68k-dis.c: Include <libiberty.h>.
2607 (print_insn_m68k): Sort the opcode table on the most significant
2608 nibble of the opcode.
2610 start-sanitize-tic80
2611 Sat Jan 18 15:15:05 1997 Fred Fish <fnf@cygnus.com>
2613 * tic80-dis.c (tic80_opcodes): Add "wrcr", "vmpy", "vrnd",
2614 "vsub", "vst", "xnor", and "xor" instructions.
2615 (V_a1): Renamed from V_a, msb of accumulator reg number.
2616 (V_a0): Add macro, lsb of accumulator reg number.
2618 Fri Jan 17 18:24:31 1997 Fred Fish <fnf@cygnus.com>
2620 * tic80-dis.c (print_insn_tic80): Broke excessively long
2621 function up into several smaller ones and arranged for
2622 the instruction printing function to be callable recursively
2623 to print vector instructions that have both a load and a
2624 math instruction packed into a single opcode.
2625 * tic80-opc.c (tic80_opcodes): Expand comment for vld opcode
2626 to explain why it comes after the other vector opcodes.
2629 Fri Jan 17 16:19:15 1997 J.T. Conklin <jtc@beauty.cygnus.com>
2631 * m68k-opc.c (m68k_opcodes): add b, w, or l specifier to coldfire
2632 move insns to handle immediate operands.
2634 Thu Jan 17 16:19:00 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2636 * m68k-opc.c (m68k_opcodes): Delete duplicate entry for "cmpil".
2637 fix operand mask in the "moveml" entries for the coldfire.
2639 start-sanitize-tic80
2640 Thu Jan 16 20:54:40 1997 Fred Fish <fnf@cygnus.com>
2642 * tic80-opc.c (V_a, V_m, V_S, V_Z, V_p, OP_V, MASK_V):
2643 New macros for building vector instruction opcodes.
2644 (tic80_opcodes): Remove all uses of FMT_SI, FMT_REG, and
2645 FMT_LI, which were unused. The field is now a flags field.
2646 Remove some opcodes that are possible, but illegal, such
2647 as long immediate instructions with doubles for immediate
2648 values. Add "vadd" and "vld" instructions.
2650 Wed Jan 15 18:59:51 1997 Fred Fish <fnf@cygnus.com>
2652 * tic80-opc.c (tic80_operands): Reorder some table entries to make
2653 the order more logical. Move the shift alias instructions ("rotl",
2654 "shl", "ins", "rotr", "extu", "exts", "srl", and "sra" to be
2655 interspersed with the regular sr.x and sl.x instructions. Add
2656 and test new instruction opcodes for "sl", "sli", "sr", "sri", "st",
2657 "sub", "subu", "swcr", and "trap".
2659 Tue Jan 14 19:42:50 1997 Fred Fish <fnf@cygnus.com>
2661 * tic80-opc.c (OFF_SS_PC): Renamed from OFF_SS.
2662 (OFF_SL_PC): Renamed from OFF_SL.
2663 (OFF_SS_BR): New operand type for base relative operand.
2664 (OFF_SL_BR): New operand type for base relative operand.
2665 (REG_BASE): New operand type for base register operand.
2666 (tic80_opcodes): Add and test "fmpy", "frndm", "frndn", "frndp",
2667 "frndz", "fsqrt", "fsub", "illop0", "illopF", "ins", "jsr",
2668 "ld", "ld.u", "lmo", "or", "rdcr", "rmo", "rotl", and "rotr"
2670 * tic80-dis.c (print_insn_tic80): Print opcode name with fixed width
2671 10 char field, padded with spaces on rhs, rather than a string
2672 followed by a tab. Use renamed TIC80_OPERAND_PCREL flag bit rather
2673 than old TIC80_OPERAND_RELATIVE. Add support for new
2674 TIC80_OPERAND_BASEREL flag bit.
2676 Mon Jan 13 15:58:56 1997 Fred Fish <fnf@cygnus.com>
2678 * tic80-dis.c (print_insn_tic80): Print floating point operands
2680 * tic80-opc.c (SPFI): Add single precision floating point
2681 immediate operand type.
2682 (ROTATE): Add rotate operand type for shifts.
2683 (ENDMASK): Add for shifts.
2684 (n): Macro for the 'n' bit.
2685 (i): Macro for the 'i' bit.
2686 (PD): Macro for the 'PD' field.
2687 (P2): Macro for the 'P2' field.
2688 (P1): Macro for the 'P1' field.
2689 (tic80_opcodes): Add entries for "exts", "extu", "fadd",
2693 Mon Jan 6 15:06:55 1997 Jeffrey A Law (law@cygnus.com)
2695 * mn10200-dis.c (disassemble): Mask off unwanted bits after
2696 adding in current address for pc-relative operands.
2698 start-sanitize-tic80
2699 Mon Jan 6 10:56:25 1997 Fred Fish <fnf@cygnus.com>
2701 * tic80-dis.c (R_SCALED): Add macro to test for ":s" modifier bit.
2702 (print_insn_tic80): If R_SCALED then print ":s" modifier for operand.
2703 * tic80-opc.c (REG0, REG22, REG27, SSOFF, LSOFF): Names
2704 changed to REG_0, REG_22, REG_DEST, OFF_SS, OFF_SL respectively.
2705 (SICR, LICR, REGM_SI, REGM_LI): Names changed to CR_SI, CR_LI,
2706 REG_BASE_M_SI, REG_BASE_M_LI respectively.
2707 (REG_SCALED, LSI_SCALED): New operand types.
2708 (E): New macro for 'E' bit at bit 27.
2709 (tic80_opcodes): Add and test dld, dld.u, dst, estop, and etrap
2710 opcodes, including the various size flavors (b,h,w,d) for
2711 the direct load and store instructions.
2713 Sun Jan 5 12:18:14 1997 Fred Fish <fnf@cygnus.com>
2715 * tic80-dis.c (M_SI, M_LI): Add macros to test for ":m" modifier bit
2717 * tic80-dis.c (print_insn_tic80): Change comma and paren handling.
2718 Use M_SI and M_LI macros to check for ":m" modifier for GPR operands.
2719 * tic80-opc.c (tic80_operands): Add REGM_SI and REGM_LI operands.
2720 (F, M_REG, M_LI, M_SI, SZ_REG, SZ_LI, SZ_SI, D, S): New bit-twiddlers.
2721 (MASK_LI_M, MASK_SI_M, MASK_REG_M): Remove and replace in opcode
2722 masks with "MASK_* & ~M_*" to get the M bit reset.
2723 (tic80_opcodes): Add bsr, bsr.a, cmnd, cmp, dcachec, and dcachef.
2725 Sat Jan 4 19:05:05 1997 Fred Fish <fnf@cygnus.com>
2727 * tic80-dis.c (print_insn_tic80): Print TIC80_OPERAND_RELATIVE
2728 correctly. Add support for printing TIC80_OPERAND_BITNUM and
2729 TIC80_OPERAND_CC, and TIC80_OPERAND_CR operands in symbolic
2731 * tic80-opc.c (tic80_operands): Add SSOFF, LSOFF, BITNUM,
2732 CC, SICR, and LICR table entries.
2733 (tic80_opcodes): Add and test "nop", "br", "bbo", "bbz",
2734 "bcnd", and "brcr" opcodes.
2737 Fri Jan 3 18:32:11 1997 Fred Fish <fnf@cygnus.com>
2739 * ppc-opc.c (powerpc_operands): Make comment match the
2740 actual fields (no shift field).
2741 * sparc-opc.c (sparc_opcodes): Document why this cannot be "const".
2742 start-sanitize-tic80
2743 * tic80-dis.c (print_insn_tic80): Replace abort stub with a
2744 partial implementation, work in progress.
2745 * tic80-opc.c (tic80_operands): Begin construction operands table.
2746 (tic80_opcodes): Continue populating opcodes table and start
2747 filling in the operand indices.
2748 (tic80_num_opcodes): Add this.
2751 Fri Jan 3 12:13:52 1997 Ian Lance Taylor <ian@cygnus.com>
2753 * m68k-opc.c: Add #B case for moveq.
2755 Thu Jan 2 12:14:29 1997 Jeffrey A Law (law@cygnus.com)
2757 * mn10300-dis.c (disassemble): Make sure all variables are initialized
2758 before they are used.
2760 Tue Dec 31 12:20:38 1996 Jeffrey A Law (law@cygnus.com)
2762 * v850-opc.c (v850_opcodes): Put curly-braces around operands
2763 for "breakpoint" instruction.
2765 Tue Dec 31 15:38:13 1996 Ian Lance Taylor <ian@cygnus.com>
2767 * Makefile.in (ALL_CFLAGS): Add -D_GNU_SOURCE.
2768 (dep): Use ALL_CFLAGS rather than CFLAGS.
2770 Tue Dec 31 15:09:16 1996 Michael Meissner <meissner@tiktok.cygnus.com>
2772 * v850-opc.c (D8_{6,7}): Set V850_OPERAND_ADJUST_SHORT_MEMORY
2775 Mon Dec 30 17:02:11 1996 Fred Fish <fnf@cygnus.com>
2777 * Makefile.in (m68k-opc.o, alpha-opc.o): Remove dis-asm.h dependency.
2778 start-sanitize-tic80
2779 (tic80-dis.o, tic80-opc.o): Add rules per comment in Makefile.in.
2782 Mon Dec 30 11:38:01 1996 Ian Lance Taylor <ian@cygnus.com>
2784 * mips16-opc.c: Add "abs".
2786 start-sanitize-tic80
2787 Sun Dec 29 10:58:22 1996 Fred Fish <fnf@cygnus.com>
2789 * Makefile.in (ALL_MACHINES): Add tic80-dis.o and tic80-opc.o.
2790 * disassemble.c (ARCH_tic80): Define if ARCH_all is defined.
2791 (disassembler): Add bfd_arch_tic80 support to set disassemble
2792 to print_insn_tic80.
2793 * tic80-dis.c (print_insn_tic80): Add stub.
2795 Fri Dec 27 22:30:57 1996 Fred Fish <fnf@cygnus.com>
2797 * configure.in (arch in $selarchs): Add bfd_tic80_arch entry.
2798 * configure: Regenerate with autoconf.
2799 * tic80-dis.c: Add file.
2800 * tic80-opc.c: Add file.
2803 Fri Dec 20 14:30:19 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2805 * d10v-opc.c (pre_defined_registers): Add cr[0-15], dpc, dpsw, link.
2807 Mon Dec 16 13:00:15 1996 Jeffrey A Law (law@cygnus.com)
2809 * mn10200-opc.c (mn10200_operands): Add SIMM16N.
2810 (mn10200_opcodes): Use it for some logicals and btst insns.
2811 Add "break" and "trap" instructions.
2813 * mn10300-opc.c (mn10300_opcodes): Add "break" instruction.
2815 * mn10200-opc.c: Add pseudo-ops for "mov (an),am" and "mov an,(am)".
2817 Sat Dec 14 22:36:20 1996 Ian Lance Taylor <ian@cygnus.com>
2819 * mips-dis.c (print_mips16_insn_arg): The base address of a PC
2820 relative load or add now depends upon whether the instruction is
2823 Wed Dec 11 09:23:46 1996 Jeffrey A Law (law@cygnus.com)
2825 * mn10200-dis.c: Finish writing disassembler.
2826 * mn10200-opc.c (mn10200_opcodes): Fix mask for "mov imm8,dn".
2827 Fix mask for "jmp (an)".
2829 * mn10300-dis.c (disassemble, print_insn_mn10300): Corrently
2830 handle endianness issues for mn10300.
2832 * mn10200-opc.c (mn10200_opcodes): Fix operands for "movb dm,(an)".
2834 Tue Dec 10 12:08:05 1996 Jeffrey A Law (law@cygnus.com)
2836 * mn10200-opc.c (mn10200_opcodes): "mov imm8,d0" is a format 2
2837 instruction. Fix opcode field for "movb (imm24),dn".
2839 * mn10200-opc.c (mn10200_operands): Fix insertion position
2842 Mon Dec 9 16:42:43 1996 Jeffrey A Law (law@cygnus.com)
2844 * mn10200-opc.c: Create mn10200 opcode table.
2845 * mn10200-dis.c: Flesh out mn10200 disassembler. Not ready,
2846 but moving along nicely.
2848 Sun Dec 8 04:28:31 1996 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2850 * Makefile.in (ALL_MACHINES): Add mips16-opc.o.
2852 Fri Dec 6 16:47:40 1996 J.T. Conklin <jtc@rhino.cygnus.com>
2854 * m68k-opc.c (m68k_opcodes): Revert change to use < and >
2855 specifiers for fmovem* instructions.
2857 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
2859 * mn10300-dis.c (disassemble): Remove '$' register prefixing.
2861 Fri Dec 6 17:34:39 1996 Ian Lance Taylor <ian@cygnus.com>
2863 * mips16-opc.c: Change opcode for entry/exit to avoid conflicting
2866 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
2868 * mn10300-opc.c: Add some comments explaining the various
2871 * mn10300-dis.c (disassemble): Fix minor gcc -Wall warnings.
2873 Thu Dec 5 12:09:48 1996 J.T. Conklin <jtc@rtl.cygnus.com>
2875 * m68k-dis.c (print_insn_arg): Handle new < and > operand
2878 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
2879 operand specifiers in fmovm* instructions.
2881 Wed Dec 4 14:52:18 1996 Ian Lance Taylor <ian@cygnus.com>
2883 * ppc-opc.c (insert_li): Give an error if the offset has the two
2884 least significant bits set.
2886 Wed Nov 27 13:09:01 1996 Ian Lance Taylor <ian@cygnus.com>
2888 * mips-dis.c (print_insn_mips16): Separate the instruction from
2889 the arguments with a tab, not a space.
2891 Tue Nov 26 13:24:17 1996 Jeffrey A Law (law@cygnus.com)
2893 * mn10300-dis.c (disasemble): Finish conversion to '$' as
2896 * mn10300-opc.c (mn10300_opcodes): Fix mask field for
2899 Tue Nov 26 10:53:21 1996 Ian Lance Taylor <ian@cygnus.com>
2901 * configure: Rebuild with autoconf 2.12.
2903 Add support for mips16 (16 bit MIPS implementation):
2904 * mips16-opc.c: New file.
2905 * mips-dis.c: Include "elf-bfd.h" and "elf/mips.h".
2906 (mips16_reg_names): New static array.
2907 (print_insn_big_mips): Use print_insn_mips16 in 16 bit mode or
2908 after seeing a 16 bit symbol.
2909 (print_insn_little_mips): Likewise.
2910 (print_insn_mips16): New static function.
2911 (print_mips16_insn_arg): New static function.
2912 * mips-opc.c: Add jalx instruction.
2913 * Makefile.in (mips16-opc.o): New target.
2914 * configure.in: Use mips16-opc.o for bfd_mips_arch.
2915 * configure: Rebuild.
2917 Mon Nov 25 16:15:17 1996 J.T. Conklin <jtc@cygnus.com>
2919 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
2920 operand specifiers in *save, *restore and movem* instructions.
2922 * m68k-opc.c (m68k_opcodes): Fix move and movem instructions for
2925 * m68k-opc.c (m68k_opcodes): The coldfire (mcf5200) can only use
2926 register operands for immediate arithmetic, not, neg, negx, and
2927 set according to condition instructions.
2929 * m68k-opc.c (m68k_opcodes): Consistantly Use "s" as the storage
2930 specifier of the effective-address operand in immediate forms of
2931 arithmetic instructions. The specifier for the immediate operand
2932 notes how and where the constant will be stored.
2934 Mon Nov 25 11:17:01 1996 Jeffrey A Law (law@cygnus.com)
2936 * mn10300-opc.c (mn10300_opcodes): Remove redundant "lcc"
2939 * mn10300-dis.c (disassemble): Use '$' instead of '%' for
2942 * mn10300-dis.c (disassemble): Prefix registers with '%'.
2944 Wed Nov 20 10:37:13 1996 Jeffrey A Law (law@cygnus.com)
2946 * mn10300-dis.c (disassemble): Handle register lists.
2948 * mn10300-opc.c: Fix handling of register list operand for
2949 "call", "ret", and "rets" instructions.
2951 * mn10300-dis.c (disassemble): Print PC-relative and memory
2952 addresses symbolically if possible.
2953 * mn10300-opc.c: Distinguish between absolute memory addresses,
2954 pc-relative offsets & random immediates.
2956 * mn10300-dis.c (print_insn_mn10300): Fix fetch of last byte
2958 (disassemble): Handle SPLIT and EXTENDED operands.
2960 Tue Nov 19 13:33:01 1996 Jeffrey A Law (law@cygnus.com)
2962 * mn10300-dis.c: Rough cut at printing some operands.
2964 * mn10300-dis.c: Start working on disassembler support.
2965 * mn10300-opc.c (mn10300_opcodes): Fix masks on several insns.
2967 * mn10300-opc.c (mn10300_operands): Add "REGS" for a register
2969 (mn10300_opcodes): Use REGS for register list in "movm" instructions.
2971 Mon Nov 18 15:20:35 1996 Michael Meissner <meissner@tiktok.cygnus.com>
2973 * d10v-opc.c (d10v_opcodes): Add3 sets the carry.
2975 Fri Nov 15 13:43:19 1996 Jeffrey A Law (law@cygnus.com)
2977 * mn10300-opc.c (mn10300_opcodes): Demand parens around
2978 register argument is calls and jmp instructions.
2980 Thu Nov 7 00:26:05 1996 Jeffrey A Law (law@cygnus.com)
2982 * mn10300-opc.c (mn10300_opcodes): Use DN01 for putx and
2983 getx operand. Fix opcode for mulqu imm,dn.
2985 Wed Nov 6 13:42:32 1996 Jeffrey A Law (law@cygnus.com)
2987 * mn10300-opc.c (mn10300_operands): Hijack "bits" field
2988 in MN10300_OPERAND_SPLIT operands for how many bits
2989 appear in the basic insn word. Add IMM32_HIGH24,
2990 IMM32_HIGH24_LOWSHIFT8, IMM8E_SHIFT8.
2991 (mn10300_opcodes): Use new operands as needed.
2993 * mn10300-opc.c (mn10300_operands): Add IMM32_LOWSHIFT8
2994 for bset, bclr, btst instructions.
2995 (mn10300_opcodes): Use new IMM32_LOWSHIFT8 as needed.
2997 * mn10300-opc.c (mn10300_operands): Remove many redundant
2998 operands. Update opcode table as appropriate.
2999 (IMM32): Add MN10300_OPERAND_SPLIT flag.
3000 (mn10300_opcodes): Fix single bit error in mov imm32,dn insn.
3002 Tue Nov 5 13:26:58 1996 Jeffrey A Law (law@cygnus.com)
3004 * mn10300-opc.c (mn10300_operands): Add DN2, DM2, AN2, AM2
3005 operands (for indexed load/stores). Fix bitpos for DI
3006 operand. Add SN8N_SHIFT8, IMM8_SHIFT8, and D16_SHIFT for the
3007 few instructions that insert immediates/displacements in the
3008 middle of the instruction. Add IMM8E for 8 bit immediate in
3009 the extended part of an instruction.
3010 (mn10300_operands): Use new opcodes as appropriate.
3012 Tue Nov 5 10:30:51 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3014 * d10v-opc.c (d10v_opcodes): Declare the trap instruction
3015 sequential so the assembler never parallelizes it with
3018 Mon Nov 4 12:50:40 1996 Jeffrey A Law (law@cygnus.com)
3020 * mn10300-opc.c (mn10300_operands): Add DN01 and AN01 for
3021 a data/address register that appears in register field 0
3022 and register field 1.
3023 (mn10300_opcodes): Use DN01 and AN01 for mov/cmp imm8,DN/AN
3025 Fri Nov 1 10:29:11 1996 Richard Henderson <rth@tamu.edu>
3027 * alpha-dis.c (print_insn_alpha): Use new NOPAL mask for
3028 standard disassembly.
3030 * alpha-opc.c (alpha_operands): Rearrange flags slot.
3031 (alpha_opcodes): Add new BWX, CIX, and MAX instructions.
3032 Recategorize PALcode instructions.
3034 Wed Oct 30 16:46:58 1996 Jeffrey A Law (law@cygnus.com)
3036 * v850-opc.c (v850_opcodes): Add relaxing "jbr".
3038 Tue Oct 29 16:30:28 1996 Ian Lance Taylor <ian@cygnus.com>
3040 * mips-dis.c (_print_insn_mips): Don't print a trailing tab if
3041 there are no operand types.
3043 Tue Oct 29 12:22:21 1996 Jeffrey A Law (law@cygnus.com)
3045 * v850-opc.c (D9_RELAX): Renamed from D9, all references
3047 (v850_operands): Make sure D22 immediately follows D9_RELAX.
3049 Fri Oct 25 12:12:53 1996 Ian Lance Taylor <ian@cygnus.com>
3051 * i386-dis.c (print_insn_x86): Set info->bytes_per_line to 5.
3053 Thu Oct 24 17:53:52 1996 Jeffrey A Law (law@cygnus.com)
3055 * v850-opc.c (insert_d8_6): Fix operand insertion for sld.w
3056 and sst.w instructions.
3058 * v850-opc.c (v850_opcodes): Add "jCC" instructions (aliases for
3061 Thu Oct 24 17:21:20 1996 Ian Lance Taylor <ian@cygnus.com>
3063 * mips-dis.c (_print_insn_mips): Use a tab between the instruction
3066 Tue Oct 22 23:32:56 1996 Ian Lance Taylor <ian@cygnus.com>
3068 * ppc-opc.c (PPCPWR2): Define.
3069 (powerpc_opcodes): Use PPCPWR2 for fsqrt, rather than duplicating
3072 Fri Oct 11 16:03:49 1996 Jeffrey A Law (law@cygnus.com)
3074 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode
3075 field for movhu instruction.
3077 * v850-dis.c (disassemble): For V850_OPERAND_SIGNED operands,
3078 cast value to "long" not "signed long" to keep hpux10
3081 Thu Oct 10 10:25:58 1996 Jeffrey A Law (law@cygnus.com)
3083 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode field
3086 * mn10300-opc.c (FMT*): Remove definitions.
3088 * mn10300-opc.c (mn10300_opcodes): Fix destination register
3089 for shift-by-register opcodes.
3091 * mn10300-opc.c (mn10300_operands): Break DN, DM, AN, AM
3092 into [AD][MN][01] for encoding the position of the register
3095 Wed Oct 9 11:19:26 1996 Jeffrey A Law (law@cygnus.com)
3097 * mn10300-opc.c (mn10300_opcodes): Add "extended" instructions,
3098 "putx", "getx", "mulq", "mulqu", "sat16", "sat24", "bsch".
3100 Tue Oct 8 11:55:35 1996 Jeffrey A Law (law@cygnus.com)
3102 * mn10300-opc.c (mn10300_operands): Remove "REGS" operand.
3103 Fix various typos. Add "PAREN" operand.
3104 (MEM, MEM2): Define.
3105 (mn10300_opcodes): Surround all memory addresses with "PAREN"
3106 operands. Fix several typos.
3108 * mn10300-opc.c (mn10300_opcodes): Fix typos in yesterday's
3111 Mon Oct 7 16:48:45 1996 Jeffrey A Law (law@cygnus.com)
3113 * mn10300-opc.c (FMT_XX): Renumber starting at one.
3114 (mn10300_operands): Rough cut. Enough to parse "mov" instructions
3116 (mn10300_opcodes): Break opcode format out into its own field.
3117 Update many operand fields to deal with signed vs unsigned
3118 issues. Fix one or two typos in the "mov" instruction
3119 opcode, mask and/or operand fields.
3121 Mon Oct 7 11:39:49 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
3123 * m68k-opc.c (plusha): Prefer encoding for m68040up, in case
3124 m68851 wasn't reset.
3126 Thu Oct 3 17:17:02 1996 Ian Lance Taylor <ian@cygnus.com>
3128 * mn10300-opc.c (mn10300_opcodes): Add opcode & masks for
3129 all opcodes. Very rough cut at operands for all opcodes.
3131 * mn10300-opc.c (mn10300_opcodes): Start fleshing out the
3134 Thu Oct 3 10:06:07 1996 Jeffrey A Law (law@cygnus.com)
3136 * mn10200-opc.c, mn10300-opc.c: New files.
3137 * mn10200-dis.c, mn10300-dis.c: New files.
3138 * mn10x00-opc.c, mn10x00-dis.c: Deleted.
3139 * disassemble.c: Break mn10x00 support into 10200 and 10300
3141 * configure.in: Likewise.
3142 * configure: Rebuilt.
3144 Thu Oct 3 15:59:12 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
3146 * Makefile.in (MOSTLYCLEAN): Move config.log to distclean.
3148 Wed Oct 2 23:28:42 1996 Jeffrey A Law (law@cygnus.com)
3150 * mn10x00-opc.c, mn10x00-dis.c: New files for Matsushita
3152 * disassemble (ARCH_mn10x00): Define.
3153 (disassembler): Handle bfd_arch_mn10x00.
3154 * configure.in: Recognize bfd_mn10x00_arch.
3155 * configure: Rebuilt.
3157 Tue Oct 1 10:49:11 1996 Ian Lance Taylor <ian@cygnus.com>
3159 * i386-dis.c (op_rtn): Change to be a pointer. Adjust uses
3160 accordingly. Don't declare functions using op_rtn.
3162 Fri Sep 27 18:28:59 1996 Stu Grossman (grossman@critters.cygnus.com)
3164 * v850-dis.c (disassemble): Add memaddr argument. Re-arrange
3165 params to be more standard.
3166 * (disassemble): Print absolute addresses and symbolic names for
3167 branch and jump targets.
3168 * v850-opc.c (v850_operand): Add displacement flag to 9 and 22
3170 * (v850_opcodes): Add breakpoint insn.
3172 Mon Sep 23 12:32:26 1996 Ian Lance Taylor <ian@cygnus.com>
3174 * m68k-opc.c: Move the fmovemx data register cases before the
3175 other cases, so that they get recognized before the data register
3176 does gets treated as a degenerate register list.
3178 Tue Sep 17 12:06:51 1996 Ian Lance Taylor <ian@cygnus.com>
3180 * mips-opc.c: Add a case for "div" and "divu" with two registers
3181 and a destination of $0.
3183 Tue Sep 10 16:12:39 1996 Fred Fish <fnf@rtl.cygnus.com>
3185 * mips-dis.c (print_insn_arg): Add prototype.
3186 (_print_insn_mips): Ditto.
3188 Mon Sep 9 14:26:26 1996 Ian Lance Taylor <ian@cygnus.com>
3190 * mips-dis.c (print_insn_arg): Print condition code registers as
3193 Tue Sep 3 12:09:46 1996 Doug Evans <dje@canuck.cygnus.com>
3195 * sparc-opc.c (sparc_opcodes): Add setuw, setsw, setx.
3197 Tue Sep 3 12:05:25 1996 Jeffrey A Law (law@cygnus.com)
3199 * v850-dis.c (disassemble): Make static. Provide prototype.
3201 Sun Sep 1 22:30:40 1996 Jeffrey A Law (law@cygnus.com)
3203 * v850-opc.c (insert_d9, insert_d22): Fix boundary case
3206 Sat Aug 31 01:27:26 1996 Jeffrey A Law (law@cygnus.com)
3208 * v850-dis.c (disassemble): Handle insertion of ',', '[' and
3209 ']' characters into the output stream.
3210 * v850-opc.c (v850_opcodes: Remove size field from all opcodes.
3211 Add "memop" field to all opcodes (for the disassembler).
3212 Reorder opcodes so that "nop" comes before "mov" and "jr"
3213 comes before "jarl".
3215 * v850-dis.c (print_insn_v850): Fix typo in last change.
3217 * v850-dis.c (print_insn_v850): Properly handle disassembling
3218 a two byte insn at the end of a memory region when the memory
3219 region's size is only two byte aligned.
3221 * v850-dis.c (v850_cc_names): Fix stupid thinkos.
3223 * v850-dis.c (v850_reg_names): Define.
3224 (v850_sreg_names, v850_cc_names): Likewise.
3225 (disassemble): Very rough cut at printing operands (unformatted).
3227 * v850-opc.c (BOP_MASK): Fix.
3228 (v850_opcodes): Fix mask for jarl and jr.
3230 * v850-dis.c: New file. Skeleton for disassembler support.
3231 * Makefile.in Remove v850 references, they're not needed here.
3232 * configure.in: Add v850-dis.o when building v850 toolchains.
3233 * configure: Rebuilt.
3234 * disassemble.c (disassembler): Call v850 disassembler.
3236 * v850-opc.c (insert_d8_7, extract_d8_7): New functions.
3237 (insert_d8_6, extract_d8_6): New functions.
3238 (v850_operands): Rename D7S to D7; operand for D7 is unsigned.
3239 Rename D8 to D8_7, use {insert,extract}_d8_7 routines.
3241 (IF4A, IF4B): Use "D7" instead of "D7S".
3242 (IF4C, IF4D): Use "D8_7" instead of "D8".
3243 (IF4E, IF4F): New. Use "D8_6".
3244 (v850_opcodes): Use IF4A/IF4B for sld.b/sst.b. Use IF4C/IF4D for
3245 sld.h/sst.h. Use IF4E/IF4F for sld.w/sst.w.
3247 * v850-opc.c (insert_d16_15, extract_d16_15): New functions.
3248 (v850_operands): Change D16 to D16_15, use special insert/extract
3249 routines. New new D16 that uses the generic insert/extract code.
3250 (IF7A, IF7B): Use D16_15.
3251 (IF7C, IF7D): New. Use D16.
3252 (v850_opcodes): Use IF7C and IF7D for ld.b and st.b.
3254 * v850-opc.c (insert_d9, insert_d22): Slightly improve error
3255 message. Issue an error if the branch offset is odd.
3257 * v850-opc.c: Add notes about needing special insert/extract
3258 for all the load/store insns, except "ld.b" and "st.b".
3260 * v850-opc.c (insert_d22, extract_d22): New functions.
3261 (v850_operands): Use insert_d22 and extract_d22 for
3263 (insert_d9): Fix range check.
3265 Fri Aug 30 18:01:02 1996 J.T. Conklin <jtc@hippo.cygnus.com>
3267 * v850-opc.c (v850_operands): Add V850_OPERAND_SIGNED flag
3268 and set bits field to D9 and D22 operands.
3270 Thu Aug 29 11:10:46 1996 Jeffrey A Law (law@cygnus.com)
3272 * v850-opc.c (v850_operands): Define SR2 operand.
3273 (v850_opcodes): "ldsr" uses R1,SR2.
3275 * v850-opc.c (v850_opcodes): Fix opcode specs for
3276 sld.w, sst.b, sst.h, sst.w, and nop.
3278 Wed Aug 28 15:55:43 1996 Jeffrey A Law (law@cygnus.com)
3280 * v850-opc.c (v850_opcodes): Add null opcode to mark the
3281 end of the opcode table.
3283 Mon Aug 26 13:35:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3285 * d10v-opc.c (pre_defined_registers): Added register pairs,
3286 "r0-r1", "r2-r3", etc.
3288 Fri Aug 23 00:27:01 1996 Jeffrey A Law (law@cygnus.com)
3290 * v850-opc.c (v850_operands): Make I16 be a signed operand.
3291 Create I16U for an unsigned 16bit mmediate operand.
3292 (v850_opcodes): Use I16U for "ori", "andi" and "xori".
3294 * v850-opc.c (v850_operands): Define EP operand.
3295 (IF4A, IF4B, IF4C, IF4D): Use EP.
3297 * v850-opc.c (v850_opcodes): Fix opcode numbers for "mov"
3298 with immediate operand, "movhi". Tweak "ldsr".
3300 * v850-opc.c (v850_opcodes): Get ld.[bhw] and st.[bhw]
3301 correct. Get sld.[bhw] and sst.[bhw] closer.
3303 * v850-opc.c (v850_operands): "not" is a two byte insn
3305 * v850-opc.c (v850_opcodes): Correct bit pattern for setf.
3307 * v850-opc.c (v850_operands): D16 inserts at offset 16!
3309 * v850-opc.c (two): Get order of words correct.
3311 * v850-opc.c (v850_operands): I16 inserts at offset 16!
3313 * v850-opc.c (v850_operands): Add "SR1" and "SR2" for system
3314 register source and destination operands.
3315 (v850_opcodes): Use SR1 and SR2 for "ldsr" and "stsr".
3317 * v850-opc.c (v850_opcodes): Fix thinko in "jmp" opcode. Fix
3318 same thinko in "trap" opcode.
3320 * v850-opc.c (v850_opcodes): Add initializer for size field
3323 * v850-opc.c (v850_operands): D6 -> DS7. References changed.
3324 Add D8 for 8-bit unsigned field in short load/store insns.
3325 (IF4A, IF4D): These both need two registers.
3326 (IF4C, IF4D): Define. Use 8-bit unsigned field.
3327 (v850_opcodes): For "sld.h", "sld.w", "sst.h", "sst.w", use
3328 IF4C & IF4D. For "trap" use I5U, not I5. Add IF1 operand
3329 for "ldsr" and "stsr".
3330 * v850-opc.c (v850_operands): 3-bit immediate for bit insns
3333 * v850-opc.c (v850_opcodes): Correct short store half (sst.h) and
3334 short store word (sst.w).
3336 Thu Aug 22 16:57:27 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3338 * v850-opc.c (v850_operands): Added insert and extract fields,
3339 pointers to functions that handle unusual operand encodings.
3341 Thu Aug 22 01:05:24 1996 Jeffrey A Law (law@cygnus.com)
3343 * v850-opc.c (v850_opcodes): Enable "trap".
3345 * v850-opc.c (v850_opcodes): Fix order of displacement
3346 and register for "set1", "clr1", "not1", and "tst1".
3348 Wed Aug 21 18:46:26 1996 Jeffrey A Law (law@cygnus.com)
3350 * v850-opc.c (v850_operands): Add "B3" support.
3351 (v850_opcodes): Fix and enable "set1", "clr1", "not1"
3354 * v850-opc.c (v850_opcodes): "jmp" has only an R1 operand.
3356 * v850-opc.c: Close unterminated comment.
3358 Wed Aug 21 17:31:26 1996 J.T. Conklin <jtc@hippo.cygnus.com>
3360 * v850-opc.c (v850_operands): Add flags field.
3361 (v850_opcodes): add move opcodes.
3363 Tue Aug 20 14:41:03 1996 J.T. Conklin <jtc@hippo.cygnus.com>
3365 * Makefile.in (ALL_MACHINES): Add v850-opc.o.
3366 * configure: (bfd_v850v_arch) Add new case.
3367 * configure.in: (bfd_v850_arch) Add new case.
3368 * v850-opc.c: New file.
3370 Mon Aug 19 15:21:38 1996 Doug Evans <dje@canuck.cygnus.com>
3372 * sparc-dis.c (print_insn_sparc): Handle little endian sparcs.
3374 Thu Aug 15 13:14:43 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3376 * d10v-opc.c: Add additional information to the opcode
3377 table to help determinine which instructions can be done
3380 Thu Aug 15 13:11:13 1996 Stan Shebs <shebs@andros.cygnus.com>
3382 * mpw-make.sed: Update editing of include pathnames to be
3385 Thu Aug 15 16:28:41 1996 James G. Smith <jsmith@cygnus.co.uk>
3387 * arm-opc.h: Added "bx" instruction definition.
3389 Wed Aug 14 17:00:04 1996 Richard Henderson <rth@tamu.edu>
3391 * alpha-opc.c (EV4EXTHWINDEX): Field width should be 8 not 5.
3393 Mon Aug 12 14:30:37 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3395 * d10v-opc.c (d10v_opcodes): Minor fixes to addi and bl.l.
3397 Fri Aug 9 13:21:59 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3399 * d10v-opc.c (d10v_opcodes): Correct 'mv' unit entry to EITHER.
3401 Thu Aug 8 12:43:52 1996 Klaus Kaempf <kkaempf@progis.de>
3403 * makefile.vms: Update for alpha-opc changes.
3405 Wed Aug 7 11:55:10 1996 Ian Lance Taylor <ian@cygnus.com>
3407 * i386-dis.c (print_insn_i386): Actually return the correct value.
3408 (ONE, OP_ONE): #ifdef out; not used.
3410 Fri Aug 2 17:47:03 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3412 * d10v-opc.c (d10v_opcodes): Added 2 accumulator sub instructions.
3413 Changed subi operand type to treat 0 as 16.
3415 Wed Jul 31 16:21:41 1996 Ian Lance Taylor <ian@cygnus.com>
3417 * m68k-opc.c: Add cpushl for the mcf5200. From Ken Rose
3420 Wed Jul 31 14:39:27 1996 James G. Smith <jsmith@cygnus.co.uk>
3422 * arm-opc.h: (arm_opcodes): Added halfword and sign-extension
3423 memory transfer instructions. Add new format string entries %h and %s.
3424 * arm-dis.c: (print_insn_arm): Provide decoding of the new
3427 Fri Jul 26 11:45:04 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3429 * d10v-opc.c (d10v_operands): Added UNUM4S; a 4-bit accumulator shift.
3430 (d10v_opcodes): Modified accumulator shift instructions to use UNUM4S.
3432 Fri Jul 26 14:01:43 1996 Ian Lance Taylor <ian@cygnus.com>
3434 * alpha-dis.c (print_insn_alpha_osf): Remove.
3435 (print_insn_alpha_vms): Remove.
3436 (print_insn_alpha): Make globally visible. Chose the register
3437 names based on info->flavour.
3438 * disassemble.c: Always return print_insn_alpha for the alpha.
3440 Thu Jul 25 15:24:17 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3442 * d10v-dis.c (dis_long): Handle unknown opcodes.
3444 Thu Jul 25 12:08:09 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3446 * d10v-opc.c: Changes to support signed and unsigned numbers.
3447 All instructions with the same name that have long and short forms
3448 now end in ".l" or ".s". Divs added.
3449 * d10v-dis.c: Changes to support signed and unsigned numbers.
3451 Tue Jul 23 11:02:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3453 * d10v-dis.c: Change all functions to use info->print_address_func.
3455 Mon Jul 22 15:38:53 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
3457 * m68k-opc.c (m68k_opcodes): Make opcode masks for the ColdFire
3458 move ccr/sr insns more strict so that the disassembler only
3459 selects them when the addressing mode is data register.
3461 Mon Jul 22 11:25:24 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3462 * d10v-opc.c (pre_defined_registers): Declare.
3463 * d10v-dis.c (print_operand): Now uses pre_defined_registers
3464 to pick a better name for the registers.
3466 Mon Jul 22 13:47:23 1996 Ian Lance Taylor <ian@cygnus.com>
3468 * sparc-opc.c: Fix opcode values for fpack16, and fpackfix. Fix
3469 operands for fexpand and fpmerge. From Christian Kuehnke
3470 <Christian.Kuehnke@arbi.informatik.uni-oldenburg.de>.
3472 Mon Jul 22 13:17:06 1996 Richard Henderson <rth@tamu.edu>
3474 * alpha-dis.c (print_insn_alpha): No longer the user-visible
3475 print routine. Take new regnames and cpumask arguments.
3476 Kill the environment variable nonsense.
3477 (print_insn_alpha_osf): New function. Do OSF/1 style regnames.
3478 (print_insn_alpha_vms): New function. Do VMS style regnames.
3479 * disassemble.c (disassembler): Test bfd flavour to pick
3480 between OSF and VMS routines. Default to OSF.
3482 Thu Jul 18 17:19:34 1996 Ian Lance Taylor <ian@cygnus.com>
3484 * configure.in: Call AC_SUBST (INSTALL_SHLIB).
3485 * configure: Rebuild.
3486 * Makefile.in (install): Use @INSTALL_SHLIB@.
3488 Wed Jul 17 14:39:05 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3490 * configure: (bfd_d10v_arch) Add new case.
3491 * configure.in: (bfd_d10v_arch) Add new case.
3492 * d10v-dis.c: New file.
3493 * d10v-opc.c: New file.
3494 * disassemble.c (disassembler) Add entry for d10v.
3496 Wed Jul 17 10:12:05 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3498 * m68k-opc.c (m68k_opcodes): Fix bugs in coldfire insns relating
3499 to bcc, trapfl, subxl, and wddata discovered by Andreas Schwab.
3501 Mon Jul 15 16:59:55 1996 Stu Grossman (grossman@critters.cygnus.com)
3503 * i386-dis.c: Get rid of print_insn_i8086. Use info.mach to
3504 distinguish between variants of the instruction set.
3505 * sparc-dis.c: Get rid of print_insn_sparclite. Use info.mach to
3506 distinguish between variants of the instruction set.
3508 Fri Jul 12 10:12:01 1996 Stu Grossman (grossman@critters.cygnus.com)
3510 * i386-dis.c (print_insn_i8086): New routine to disassemble using
3511 the 8086 instruction set.
3512 * i386-dis.c: General cleanups. Make most things static. Add
3513 prototypes. Get rid of static variables aflags and dflags. Pass
3514 them as args (to almost everything).
3516 Thu Jul 11 11:58:44 1996 Jeffrey A Law (law@cygnus.com)
3518 * h8300-dis.c (bfd_h8_disassemble): Handle macregs in ldmac insns.
3520 * h8300-dis.c (bfd_h8_disassemble): Handle "ldm.l" and "stm.l".
3522 * h8300-dis.c (bfd_h8_disassemble): "abs" is implicitly two
3523 if the next arg is marked with SRC_IN_DST. Gross.
3525 * h8300-dis.c (bfd_h8_disassemble): Print "exr" when
3526 we're looking for and find EXR.
3528 * h8300-dis.c (bfd_h8_disassemble): We don't have a match
3529 if we're looking for KBIT and we don't find it.
3531 * h8300-dis.c (bfd_h8_disassemble): Mask off unwanted bits
3534 * h8300-dis.c (bfd_h8_disassemble): Don't set plen for
3535 3bit immediate operands.
3537 Tue Jul 9 10:55:20 1996 Ian Lance Taylor <ian@cygnus.com>
3539 * Released binutils 2.7.
3541 * alpha-opc.c: Add new case of "mov". From Klaus Kaempf
3542 <kkaempf@progis.ac-net.de>.
3544 Thu Jul 4 11:42:51 1996 Ian Lance Taylor <ian@cygnus.com>
3546 * alpha-opc.c: Correct second case of "mov" to use OPRL.
3548 Wed Jul 3 16:03:47 1996 Stu Grossman (grossman@critters.cygnus.com)
3550 * sparc-dis.c (print_insn_sparclite): New routine to print
3551 sparclite instructions.
3553 Wed Jul 3 14:21:18 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3555 * m68k-opc.c (m68k_opcodes): Add coldfire support.
3557 Fri Jun 28 15:53:51 1996 Doug Evans <dje@canuck.cygnus.com>
3559 * sparc-opc.c (asi_table): Add #ASI_N, #ASI_N_L, #ASI_NUCLEUS,
3560 #ASI_NUCLEUS_LITTLE. Rename #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_L
3561 to #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_LITTLE.
3563 Tue Jun 25 22:58:31 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
3565 * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir):
3566 Use autoconf-set values.
3567 (docdir, oldincludedir): Removed.
3568 * configure.in (AC_PREREQ): autoconf 2.5 or higher.
3570 Fri Jun 21 13:53:36 1996 Richard Henderson <rth@tamu.edu>
3572 * alpha-opc.c: New file.
3573 * alpha-opc.h: Remove.
3574 * alpha-dis.c: Complete rewrite to use new opcode table.
3575 * configure.in: For bfd_alpha_arch, use alpha-opc.o.
3576 * configure: Rebuild with autoconf 2.10.
3577 * Makefile.in (ALL_MACHINES): Add alpha-opc.o.
3578 (alpha-dis.o): Depend upon $(INCDIR)/opcode/alpha.h, not
3580 (alpha-opc.o): New target.
3582 Wed Jun 19 15:55:12 1996 Ian Lance Taylor <ian@cygnus.com>
3584 * sparc-dis.c (print_insn_sparc): Remove unused local variable i.
3585 Set imm_added_to_rs1 even if the source and destination register
3588 * sparc-opc.c: Add some two operand forms of the wr instruction.
3590 Tue Jun 18 15:58:27 1996 Jeffrey A. Law <law@rtl.cygnus.com>
3592 * h8300-dis.c (bfd_h8_disassemble): Rename "hmode" argument
3595 * disassemble.c (disassembler): Handle H8/S.
3596 * h8300-dis.c (print_insn_h8300s): New function for H8/S.
3598 Tue Jun 18 18:06:50 1996 Ian Lance Taylor <ian@cygnus.com>
3600 * sparc-opc.c: Add beq/teq as aliases for be/te.
3602 * ppc-opc.c: Fix fcmpo opcode. From Sergei Steshenko
3603 <sergei@msil.sps.mot.com>.
3605 Tue Jun 18 15:08:54 1996 Klaus Kaempf <kkaempf@progis.de>
3607 * makefile.vms: New file.
3609 * alpha-dis.c (print_insn_alpha): Print lda ra,lit(rz) as mov.
3611 Mon Jun 10 18:50:38 1996 Ian Lance Taylor <ian@cygnus.com>
3613 * h8300-dis.c (bfd_h8_disassemble): Always print ABS8MEM with :8,
3616 Tue Jun 4 09:15:53 1996 Doug Evans <dje@canuck.cygnus.com>
3618 * i386-dis.c (OP_OFF): Call append_prefix.
3620 Thu May 23 15:18:23 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3622 * ppc-opc.c (instruction encoding macros): Add explicit casts to
3623 unsigned long to silence a warning from the Solaris PowerPC
3626 Thu Apr 25 19:33:32 1996 Doug Evans <dje@canuck.cygnus.com>
3628 * sparc-opc.c (sparc_opcodes): Add ultrasparc vis extensions.
3630 Mon Apr 22 17:12:35 1996 Doug Evans <dje@blues.cygnus.com>
3632 * sparc-dis.c (X_IMM,X_SIMM): New macros.
3634 (print_insn_sparc): Merge cases i,I,j together. New cases X,Y.
3635 * sparc-opc.c (sparc_opcodes): Use X for 5 bit shift constants,
3636 Y for 6 bit shift constants. Rewrite entries for crdcxt, cwrcxt,
3637 cpush, cpusha, cpull sparclet insns.
3639 Wed Apr 17 14:20:22 1996 Doug Evans <dje@canuck.cygnus.com>
3641 * sparc-dis.c (compute_arch_mask): Replace ANSI style def with K&R.
3643 Thu Apr 11 17:30:02 1996 Ian Lance Taylor <ian@cygnus.com>
3645 * sparc-opc.c: Set F_FBR on floating point branch instructions.
3646 Set F_FLOAT on other floating point instructions.
3648 Mon Apr 8 17:02:48 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3650 * ppc-opc.c (PPC860): Macro for 860/821 specific instructions and
3652 (powerpc_opcodes): Add 860/821 specific SPRs.
3654 Mon Apr 8 14:00:44 1996 Ian Lance Taylor <ian@cygnus.com>
3656 * configure.in: Permit --enable-shared to specify a list of
3657 directories. Set and substitute BFD_PICLIST.
3658 * configure: Rebuild.
3659 * Makefile.in (BFD_PICLIST): Rename from BFD_LIST. Change all
3660 uses. Set to @BFD_PICLIST@.
3662 Fri Apr 5 17:12:27 1996 Jeffrey A Law (law@cygnus.com)
3664 * h8300-dis.c (bfd_h8_disassemble): Use "bit" for L_3 immediates,
3665 not "abs", which may be needed for the absolute in something
3666 like btst #0,@10:8. Print L_3 immediates separately from other
3667 immediates. Change ABSMOV reference to ABS8MEM.
3669 Wed Apr 3 10:40:45 1996 Doug Evans <dje@canuck.cygnus.com>
3671 * sparc-dis.c (opcodes_initialized): Move inside print_insn_sparc.
3672 (current_arch_mask): New static global.
3673 (compute_arch_mask): New static function.
3674 (print_insn_sparc): Delete sparc_v9_p. New static local
3675 current_mach. Resort opcode table if current_mach changes.
3676 Generalize "insn not supported" test.
3677 (compare_opcodes): Prefer supported opcodes to nonsupported ones.
3678 Delete test for v9/!v9.
3679 * sparc-opc.c (MASK_*): Use SPARC_OPCODE_ARCH_MASK.
3681 (brfc): Split into CBR and FBR for coprocessor/fp branches.
3682 (brfcx): Renamed to FBRX.
3683 (condfc): Renamed to CONDFC. Pass v6notlet to CBR (standard
3684 coprocessor mnemonics are not supported on the sparclet).
3685 (condf): Renamed to CONDF.
3686 (SLCBCC2): Delete F_ALIAS flag.
3688 Sat Mar 30 21:45:59 1996 Doug Evans <dje@canuck.cygnus.com>
3690 * sparc-opc.c (sparc_opcodes): rd must be 0 for
3691 mov foo,{%y,%psr,%wim,%tbr}. Support mov foo,%asrX.
3693 Fri Mar 29 13:02:40 1996 Ian Lance Taylor <ian@cygnus.com>
3695 * Makefile.in (config.status): Depend upon BFD VERSION file, so
3696 that the shared library version number is set correctly.
3698 Tue Mar 26 15:47:14 1996 Ian Lance Taylor <ian@cygnus.com>
3700 * configure.in: Use AC_CHECK_TOOL to find ar and ranlib. From
3701 Miles Bader <miles@gnu.ai.mit.edu>.
3702 * configure: Rebuild.
3704 Sat Mar 16 13:04:07 1996 Fred Fish <fnf@cygnus.com>
3706 * z8kgen.c (internal, gas): Call xmalloc rather than unchecked
3709 Tue Mar 12 12:14:10 1996 Ian Lance Taylor <ian@cygnus.com>
3711 * configure: Rebuild with autoconf 2.8.
3713 Thu Mar 7 15:11:10 1996 Doug Evans <dje@charmed.cygnus.com>
3715 * sparc-dis.c (print_insn_sparc): Handle 'O' operand char like 'r'.
3716 * sparc-opc.c (sparc_opcodes): Use 'O' operand char for `neg reg'.
3718 Tue Mar 5 15:51:57 1996 Ian Lance Taylor <ian@cygnus.com>
3720 * configure.in: Don't set SHLIB or SHLINK to an empty string,
3721 since they appear as targets in Makefile.in.
3722 * configure: Rebuild.
3724 Mon Feb 26 13:03:40 1996 Stan Shebs <shebs@andros.cygnus.com>
3726 * mpw-make.sed: Edit out shared library support bits.
3728 Tue Feb 20 20:48:28 1996 Doug Evans <dje@charmed.cygnus.com>
3730 * sparc-opc.c (v8,v6notv9): Add MASK_SPARCLET.
3731 (sparc_opcode_archs): Add MASK_V8 to sparclet entry.
3732 (sparc_opcodes): Add sparclet insns.
3733 (sparclet_cpreg_table): New static local.
3734 (sparc_{encode,decode}_sparclet_cpreg): New functions.
3735 * sparc-dis.c (print_insn_sparc): Handle sparclet cpregs.
3737 Tue Feb 20 11:02:44 1996 Alan Modra <alan@mullet.Levels.UniSA.Edu.Au>
3739 * i386-dis.c (index16): New static variable.
3740 (putop): Print jecxz for 32 bit case, jcxz for 16 bit, not the
3742 (OP_indirE): Return result of OP_E.
3743 (OP_E): Check for 16 bit addressing mode, and disassemble
3744 correctly. Optimised 32 bit case a little. Don't print
3745 "(base,index,scale)" when sib specifies only an offset.
3747 Mon Feb 19 12:32:17 1996 Ian Lance Taylor <ian@cygnus.com>
3749 * configure.in: Set and substitute SHLIB_DEP.
3750 * configure: Rebuild.
3751 * Makefile.in (SHLIB_DEP): New variable.
3752 (LIBIBERTY_LISTS, BFD_LIST): New variables.
3753 (stamp-piclist): Depend upon LIBIBERTY_LISTS and BFD_LIST. If
3754 COMMON_SHLIB, add them to piclist with appropriate modifications.
3755 ($(SHLIB)): Depend upon $(SHLIB_DEP). Don't check COMMON_SHLIB
3756 here: just use piclist.
3758 Mon Feb 19 02:03:50 1996 Doug Evans <dje@charmed.cygnus.com>
3760 * sparc-dis.c (MASK_V9,V9_ONLY_P,V9_P): Define.
3761 (print_insn_sparc): Rewrite v9/not-v9 tests.
3762 (compare_opcodes): Likewise.
3763 * sparc-opc.c (MASK_<ARCH>): Define.
3764 (v6,v7,v8,sparclite,v9,v9a): Redefine.
3765 (sparclet,v6notv9): Define.
3766 (sparc_opcode_archs): Delete member `conflicts'. Add `supported'.
3767 (sparc_opcodes): Delete F_NOTV9, use v6notv9 instead.
3769 Thu Feb 15 14:45:05 1996 Ian Lance Taylor <ian@cygnus.com>
3771 * configure.in: Call AC_PROG_CC before configure.host.
3772 * configure: Rebuild.
3774 * Makefile.in (SONAME): Remove leading ../bfd/ from $(SHLIB).
3776 Wed Feb 14 19:01:27 1996 Alan Modra <alan@spri.levels.unisa.edu.au>
3778 * i386-dis.c (onebyte_has_modrm): New static array.
3779 (twobyte_has_modrm): New static array.
3780 (print_insn_i386): Only fetch the mod/reg/rm byte if it is needed.
3782 Tue Feb 13 15:15:01 1996 Ian Lance Taylor <ian@cygnus.com>
3784 * Makefile.in ($(SHLINK)): Check ts against $(SHLIB), not
3787 Mon Feb 12 16:26:06 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3789 * ppc-opc.c (PPC): Undef, so default defination on Windows NT
3792 Wed Feb 7 13:59:54 1996 Ian Lance Taylor <ian@cygnus.com>
3794 * m68k-opc.c (m68k_opcodes): The bkpt instruction is supported on
3795 m68010up, not just m68020up | cpu32.
3797 * Makefile.in (SONAME): New variable.
3798 ($(SHLINK)): Make a link to the transformed name, as well.
3799 (stamp-tshlink): New target.
3800 (install): Skip stamp-tshlink during install.
3802 Tue Feb 6 12:28:54 1996 Ian Lance Taylor <ian@cygnus.com>
3804 * configure.in: Call AC_ARG_PROGRAM.
3805 * configure: Rebuild.
3806 * Makefile.in (program_transform_name): New variable.
3807 (install): Transform library name before installing it.
3809 Mon Feb 5 16:14:42 1996 Ian Lance Taylor <ian@cygnus.com>
3811 * i960-dis.c (mem): Add HX dcinva instruction.
3813 Support for building as a shared library, based on patches from
3814 Alan Modra <alan@spri.levels.unisa.edu.au>:
3815 * configure.in: Add AC_ARG_ENABLE for shared and commonbfdlib.
3816 New substitutions: ALLLIBS, PICFLAG, SHLIB, SHLIB_CC,
3817 SHLIB_CFLAGS, COMMON_SHLIB, SHLINK.
3818 * configure: Rebuild.
3819 * Makefile.in (ALLLIBS): New variable.
3820 (PICFLAG, SHLIB, SHLIB_CC, SHLIB_CFLAGS): New variables.
3821 (COMMON_SHLIB, SHLINK): New variables.
3822 (.c.o): If PICFLAG is set, compile twice, once PIC, once normal.
3823 (STAGESTUFF): Remove variable.
3824 (all): Depend upon $(ALLLIBS) rather than $(TARGETLIB).
3825 (stamp-piclist, piclist): New targets.
3826 ($(SHLIB), $(SHLINK)): New targets.
3827 ($(OFILES)): Depend upon stamp-picdir.
3828 (disassemble.o): Build twice if PICFLAG is set.
3829 (MOSTLYCLEAN): Add pic/*.o.
3830 (clean): Remove $(SHLIB), $(SHLINK), piclist, and stamp-piclist.
3831 (distclean): Remove pic and stamp-picdir.
3832 (install): Install shared libraries.
3833 (stamp-picdir): New target.
3835 Fri Feb 2 17:15:25 1996 Doug Evans <dje@charmed.cygnus.com>
3837 * sparc-dis.c (print_insn_sparc): Delete DISASM_RAW_INSN support.
3838 Print unknown instruction as "unknown", rather than in hex.
3840 Tue Jan 30 14:06:08 1996 Ian Lance Taylor <ian@cygnus.com>
3842 * dis-buf.c: Include "sysdep.h" before "dis-asm.h".
3844 Thu Jan 25 20:24:07 1996 Doug Evans <dje@charmed.cygnus.com>
3846 * sparc-opc.c (sparc_opcode_archs): Mark v8/sparclite as conflicting.
3848 Thu Jan 25 11:56:49 1996 Ian Lance Taylor <ian@cygnus.com>
3850 * i386-dis.c (print_insn_i386): Only fetch the mod/reg/rm byte
3851 when necessary. From Ulrich Drepper
3852 <drepper@myware.rz.uni-karlsruhe.de>.
3854 Thu Jan 25 03:39:10 1996 Doug Evans <dje@charmed.cygnus.com>
3856 * sparc-dis.c (print_insn_sparc): NUMOPCODES replaced with
3857 sparc_num_opcodes. Update architecture enum values.
3858 * sparc-opc.c (sparc_opcode_archs): Replaces architecture_pname.
3859 (sparc_opcode_lookup_arch): New function.
3860 (sparc_num_opcodes): Renamed from bfd_sparc_num_opcodes.
3861 (sparc_opcodes): Add v9a shutdown insn.
3863 Mon Jan 22 08:29:59 1996 Doug Evans <dje@charmed.cygnus.com>
3865 * sparc-dis.c (print_insn_sparc): Renamed from print_insn.
3866 If DISASM_RAW_INSN, print insn in hex. Handle v9a as opcode
3868 (print_insn_sparc64): Deleted.
3869 * disassemble.c (disassembler, case bfd_arch_sparc): Always use
3872 * sparc-opc.c (architecture_pname): Add v9a.
3874 Fri Jan 12 14:35:58 1996 David Mosberger-Tang <davidm@AZStarNet.com>
3876 * alpha-opc.h (alpha_insn_set): VAX floating point opcode was
3877 incorrectly defined as 0x16 when it should be 0x15.
3878 (FLOAT_FORMAT_MASK): function code is 11 bits, not just 7 bits!
3879 (alpha_insn_set): added cvtst and cvttq float ops. Also added
3880 excb (exception barrier) which is defined in the Alpha
3881 Architecture Handbook version 2.
3882 * alpha-dis.c (print_insn_alpha): Fixed special-case decoding for
3883 OPERATE_FORMAT_CODE type instructions. The bug caused mulq to be
3884 disassembled as or, for example.
3886 Wed Jan 10 12:37:22 1996 Ian Lance Taylor <ian@cygnus.com>
3888 * mips-dis.c (print_insn_arg): Print cases 'i' and 'u' in hex.
3889 (_print_insn_mips): Change i from int to unsigned int.
3891 Thu Jan 4 17:21:10 1996 David Edelsohn <edelsohn@mhpcc.edu>
3893 * ppc-opc.c (powerpc_opcodes): tlbi POWER opcode form different
3894 from tlbie PowerPC opcode. Add PPC603 tlbld and tlbli.
3896 Thu Dec 28 13:29:19 1995 John Hassey <hassey@rtp.dg.com>
3898 * i386-dis.c: Added Pentium Pro instructions.
3900 Tue Dec 19 22:56:35 1995 Michael Meissner <meissner@tiktok.cygnus.com>
3902 * ppc-opc.c (fsqrt{,.}): Duplicate for PowerPC in addition to
3905 Fri Dec 15 14:14:15 1995 J.T. Conklin <jtc@rtl.cygnus.com>
3907 * sh-opc.h (sh_nibble_type): Added REG_B.
3908 (sh_arg_type): Added A_REG_B.
3909 (sh_table): Added pref and bank reg versions of ldc, ldc.l, stc
3911 * sh-dis.c (print_insn_shx): Added cases for REG_B and A_REG_B.
3913 Fri Dec 15 16:44:31 1995 Ian Lance Taylor <ian@cygnus.com>
3915 * disassemble.c (disassembler): Use new bfd_big_endian macro.
3917 Tue Dec 12 12:22:24 1995 Ian Lance Taylor <ian@cygnus.com>
3919 * Makefile.in (distclean): Remove stamp-h. From Ronald
3920 F. Guilmette <rfg@monkeys.com>.
3922 Tue Dec 5 13:42:44 1995 Stan Shebs <shebs@andros.cygnus.com>
3924 From David Mosberger-Tang <davidm@azstarnet.com>:
3925 * alpha-dis.c (print_insn_alpha): fixed decoding of cpys
3928 Mon Dec 4 12:29:05 1995 J.T. Conklin <jtc@rtl.cygnus.com>
3930 * sh-opc.h (sh_arg_type): Added A_SSR and A_SPC.
3931 (sh_table): Added many SH3 opcodes.
3932 * sh-dis.c (print_insn_shx): Added cases for A_SSR and A_SPC.
3934 Fri Dec 1 07:42:18 1995 Michael Meissner <meissner@tiktok.cygnus.com>
3936 * ppc-opc.c (subfc., subfco): Mark this PPCCOM, not PPC.
3937 (subco,subco.): Mark this PPC, not PPCCOM.
3939 Mon Nov 27 13:09:52 1995 Ian Lance Taylor <ian@cygnus.com>
3941 * configure: Rebuild with autoconf 2.7.
3943 Tue Nov 21 18:28:06 1995 Ian Lance Taylor <ian@cygnus.com>
3945 * configure: Rebuild with autoconf 2.6.
3947 Wed Nov 15 19:02:53 1995 Ken Raeburn <raeburn@cygnus.com>
3949 * configure.in: Sort list of architectures. Accept but do nothing
3950 for alliant, convex, pyramid, romp, and tahoe.
3952 Wed Nov 8 20:18:59 1995 Ian Lance Taylor <ian@cygnus.com>
3954 * a29k-dis.c (print_special): Change num to unsigned int.
3956 Wed Nov 8 20:10:35 1995 Eric Freudenthal <freudenthal@nyu.edu>
3958 * a29k-dis.c (print_insn): Cast insn24 to unsigned long when
3961 Tue Nov 7 15:21:06 1995 Ian Lance Taylor <ian@cygnus.com>
3963 * configure.in: Call AC_CHECK_PROG to find and cache AR.
3964 * configure: Rebuilt.
3966 Mon Nov 6 17:39:47 1995 Harry Dolan <dolan@ssd.intel.com>
3968 * configure.in: Add case for bfd_i860_arch.
3969 * configure: Rebuild.
3971 Fri Nov 3 12:45:31 1995 Ian Lance Taylor <ian@cygnus.com>
3973 * m68k-opc.c (m68k_opcodes): Correct fmoveml operands.
3974 * m68k-dis.c (NEXTSINGLE): Change i to unsigned int.
3975 (NEXTDOUBLE): Likewise.
3976 (print_insn_m68k): Don't match fmoveml if there is more than one
3977 register in the list.
3978 (print_insn_arg): Handle a place of '8' for a type of 'L'.
3980 Thu Nov 2 23:06:33 1995 Ian Lance Taylor <ian@cygnus.com>
3982 * m68k-opc.c: Use #W rather than #w.
3983 * m68k-dis.c (print_insn_arg): Handle new 'W' place.
3985 Wed Nov 1 13:30:24 1995 Ian Lance Taylor <ian@cygnus.com>
3987 * m68k-opc.c (m68k_opcode_aliases): Add dbfw as an alias for dbf,
3988 and likewise for all the dbxx opcodes.
3990 Mon Oct 30 20:50:40 1995 Fred Fish <fnf@cygnus.com>
3992 * arc-dis.c: Include elf-bfd.h rather than libelf.h.
3994 Mon Oct 23 11:11:34 1995 James G. Smith <jsmith@pasanda.cygnus.co.uk>
3996 * mips-opc.c: Added shorthand (V1) for INSN_4100 manifest. Added
3997 the VR4100 specific instructions to the mips_opcodes structure.
3999 Thu Oct 19 11:05:23 1995 Stan Shebs <shebs@andros.cygnus.com>
4001 * mpw-config.in, mpw-make.sed: Remove ugly workaround for
4002 ugly Metrowerks bug in CW6, is fixed in CW7.
4004 Mon Oct 16 12:59:01 1995 Michael Meissner <meissner@tiktok.cygnus.com>
4006 * ppc-opc.c (whole file): Add flags for common/any support.
4008 Tue Oct 10 11:06:07 1995 Fred Fish <fnf@cygnus.com>
4010 * Makefile.in (BISON): Remove macro.
4011 (FLAGS_TO_PASS): Remove BISON.
4013 Fri Oct 6 16:26:45 1995 Ken Raeburn <raeburn@cygnus.com>
4015 Mon Sep 25 22:49:32 1995 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
4017 * m68k-dis.c (print_insn_m68k): Recognize all two-word
4018 instructions that take no args by looking at the match mask.
4019 (print_insn_arg): Always print "%" before register names.
4020 [case 'c']: Use "nc" for the no-cache case, as recognized by gas.
4021 [case '_']: Don't print "@#" before address.
4022 [case 'J']: Use "%s" as format string, not register name.
4023 [case 'B']: Treat place == 'C' like 'l' and 'L'.
4025 Thu Oct 5 22:16:20 1995 Ken Raeburn <raeburn@cygnus.com>
4027 * i386-dis.c: Describe cmpxchg8b operand, and spell the opcode
4030 Tue Oct 3 08:30:20 1995 steve chamberlain <sac@slash.cygnus.com>
4032 From David Mosberger-Tang <davidm@azstarnet.com>
4034 * alpha-opc.h (MEMORY_FUNCTION_FORMAT_MASK): added.
4035 (alpha_insn_set): added definitions for VAX floating point
4036 instructions (Unix compilers don't generate these, but handcoded
4037 assembly might still use them).
4039 * alpha-dis.c (print_insn_alpha): added support for disassembling
4040 the miscellaneous instructions in the Alpha instruction set.
4042 Tue Sep 26 18:47:20 1995 Stan Shebs <shebs@andros.cygnus.com>
4044 * mpw-config.in: Add m68k-opc.c.o to BFD_MACHINES for m68k,
4045 no longer create sysdep.h, sed ppc-opc.c to work around a
4046 serious Metrowerks C bug.
4047 * mpw-make.in: Remove.
4048 * mpw-make.sed: New file, used by mpw-configure to edit
4049 Makefile.in into an MPW makefile.
4051 Wed Sep 20 12:55:28 1995 Ian Lance Taylor <ian@cygnus.com>
4053 * Makefile.in (maintainer-clean): New synonym for realclean.
4055 Tue Sep 19 15:28:36 1995 Ian Lance Taylor <ian@cygnus.com>
4057 * m68k-opc.c: Split pmove patterns which use 'P' into patterns
4058 which use '0', '1', and '2' instead. Specify the proper size for
4059 a pmove immediate operand. Correct the pmovefd patterns to be
4060 moves to a register, not from a register.
4061 * m68k-dis.c (print_insn_arg): Replace 'P' with '0', '1', '2'.
4063 Thu Sep 14 11:58:22 1995 Doug Evans <dje@canuck.cygnus.com>
4065 * sparc-opc.c (sparc_opcodes): Mark all insns that reference
4066 %psr, %wim, %tbr as F_NOTV9.
4068 Fri Sep 8 01:07:38 1995 Ian Lance Taylor <ian@cygnus.com>
4070 * Makefile.in (Makefile): Just rebuild Makefile when running
4072 (config.h, stamp-h): New targets.
4073 * configure.in: Call AC_CONFIG_HEADER and AC_CANONICAL_SYSTEM
4074 earlier. Don't bother to call AC_ARG_PROGRAM. Touch stamp-h when
4075 rebuilding config.h.
4076 * configure: Rebuild.
4078 * mips-opc.c: Change unaligned loads and stores with "t,A"
4079 operands to use "t,A(b)".
4081 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4083 * sh-dis.c (print_insn_shx): Add F_FR0 support.
4085 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4087 * sh-dis.c (print_insn_shx): Change loop over op->arg[n] to iterate
4088 until 3 instead of until 2.
4090 Wed Sep 6 21:21:33 1995 Ian Lance Taylor <ian@cygnus.com>
4092 * Makefile.in (ALL_CFLAGS): Define.
4093 (.c.o, disassemble.o): Use $(ALL_CFLAGS).
4094 (MOSTLYCLEAN): Add config.log.
4095 (distclean): Don't remove config.log.
4096 * configure.in: Substitute HDEFINES.
4097 * configure: Rebuild.
4099 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4101 * sh-opc.h (sh_arg_type): Add F_FR0.
4102 (sh_table, case fmac): Add F_FR0 as first argument.
4104 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4106 * sh-opc.h (sh_opcode_info): Increase arg array size to 4.
4108 Tue Sep 5 18:28:10 1995 Doug Evans <dje@canuck.cygnus.com>
4110 * sparc-dis.c: Remove all references to NO_V9.
4112 Tue Sep 5 20:03:26 1995 Ian Lance Taylor <ian@cygnus.com>
4114 * aclocal.m4: Just include ../bfd/aclocal.m4.
4115 * configure: Rebuild.
4117 Tue Sep 5 16:09:59 1995 Doug Evans <dje@canuck.cygnus.com>
4119 * sparc-dis.c (X_DISP19): Define.
4120 (print_insn, case 'G'): Use it.
4121 (print_insn, case 'L'): Sign extend displacement.
4123 Mon Sep 4 14:28:46 1995 Ian Lance Taylor <ian@cygnus.com>
4125 * configure.in: Run ../bfd/configure.host before AC_PROG_CC.
4126 Subsitute CFLAGS and AR. Call AC_PROG_INSTALL. Don't substitute
4127 host_makefile_frag or frags.
4128 * aclocal.m4: New file.
4129 * configure: Rebuild.
4130 * Makefile.in (INSTALL): Set to @INSTALL@.
4131 (INSTALL_PROGRAM): Set to @INSTALL_PROGRAM@.
4132 (INSTALL_DATA): Set to @INSTALL_DATA@.
4134 (AR_FLAGS): Set to rc rather than qc.
4135 (CC): Define as @CC@.
4136 (CFLAGS): Set to @CFLAGS@.
4137 (@host_makefile_frag@): Remove.
4138 (config.status): Remove dependency upon @frags@.
4140 * configure.in: ../bfd/config.bfd now just sets shell variables.
4141 Use them rather than looking through target Makefile fragments.
4142 * configure: Rebuild.
4144 Thu Aug 31 12:35:32 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4146 * sh-opc.h (ftrc): Change FPUL_N to FPUL_M.
4148 Wed Aug 30 13:52:28 1995 Doug Evans <dje@canuck.cygnus.com>
4150 * sparc-opc.c (sparc_opcodes): Delete duplicate wr %y insn.
4151 Add clrx, iprefetch, signx, clruw, cas, casl, casx, casxl synthetic
4154 * sparc-opc.c (sparc_opcodes): Fix prefetcha insn.
4155 (lookup_{name,value}): New functions.
4156 (prefetch_table): New static local.
4157 (sparc_{encode,decode}_prefetch): New functions.
4158 * sparc-dis.c (print_insn): Handle '*' arg (prefetch function).
4160 Wed Aug 30 11:11:58 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4162 * sh-opc.h: Add blank lines to improve readabililty of sh3e
4165 Wed Aug 30 11:09:38 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4167 * sh-dis.c: Correct comment on first line of file.
4169 Tue Aug 29 15:37:18 1995 Doug Evans <dje@canuck.cygnus.com>
4171 * disassemble.c (disassembler): Handle bfd_mach_sparc64.
4173 * sparc-opc.c (asi, membar): New static locals.
4174 (sparc_{encode,decode}_{asi,membar}): New functions.
4175 (sparc_opcodes, membar insn): Fix.
4176 * sparc-dis.c (print_insn): Call sparc_decode_asi.
4177 Support decoding of membar masks.
4180 Sat Aug 26 21:22:48 1995 Ian Lance Taylor <ian@cygnus.com>
4182 * m68k-opc.c (m68k_opcode_aliases): Add br, brs, brb, brw, brl.
4184 Mon Aug 21 17:33:36 1995 Ian Lance Taylor <ian@cygnus.com>
4186 * m68k-opc.c (m68k_opcode_aliases): Add bhib as an alias for bhis,
4187 and likewise for the other branches. Add bhs as an alias for bcc,
4188 and likewise for the size variants. Add dbhs as an alias for
4191 Fri Aug 11 13:40:24 1995 Jeff Law (law@snake.cs.utah.edu)
4193 * sh-opc.h (FP sts instructions): Update to match reality.
4195 Mon Aug 7 16:12:58 1995 Ian Lance Taylor <ian@cygnus.com>
4197 * m68k-dis.c: (fpcr_names): Add % before all register names.
4198 (reg_names): Likewise.
4199 (print_insn_arg): Don't explicitly print % before register names.
4200 Add % before register names in static array names. In case 'r',
4201 print data registers as `@(Dn)', not `Dn@'. When printing a
4202 memory address, don't print @# before it.
4203 (print_indexed): Change base_disp and outer_disp from int to
4204 bfd_vma. Print using MIT syntax, not mutant invalid Motorola
4205 syntax. Sign extend 8 byte displacement correctly.
4206 (print_base): Print using MIT syntax. Print zpc when appropriate.
4207 Change parameter disp from int to bfd_vma.
4209 * m68k-opc.c (m68k_opcode_aliases): Add jsrl and jsrs as aliases
4212 Mon Aug 7 02:21:40 1995 Jeff Law (law@snake.cs.utah.edu)
4214 * sh-dis.c (print_insn_shx): Handle new operand types F_REG_N,
4215 F_REG_M, FPSCR_M, FPSCR_N, FPUL_M and FPUL_N.
4216 * sh-opc.h (sh_arg_type): Add new operand types.
4217 (sh_table): Add new opcodes from SH3E Floating Point ISA.
4219 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
4221 * Makefile.in (distclean): Remove generated file config.h.
4223 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
4225 * Makefile.in (distclean): Remove generated file config.h.
4227 Wed Aug 2 18:33:40 1995 Ian Lance Taylor <ian@cygnus.com>
4229 * m68k-opc.c: New file, holding tables from include/opcode/m68k.h.
4231 * m68k-dis.c: Remove BREAK_UP_BIG_DECL stuff.
4233 (print_insn_m68k): Change d to be const. Use m68k_numopcodes
4234 rather than numopcodes. Use m68k_opcodes rather than removed
4235 opcode function. Don't check F_ALIAS.
4236 (print_insn_arg): Change first parameter to be const char *.
4237 * Makefile.in (ALL_MACHINES): Add m68k-opc.o.
4238 (m68k-opc.o): New target.
4239 * configure.in: Build m68k-opc.o for bfd_m68k_arch.
4240 * configure: Rebuild.
4242 Wed Aug 2 08:23:38 1995 Doug Evans <dje@canuck.cygnus.com>
4244 * sparc-dis.c (HASH_SIZE, HASH_INSN): Define.
4245 (opcode_bits, opcode_hash_table): New variables.
4246 (opcodes_initialized): Renamed from opcodes_sorted.
4247 (build_hash_table): New function.
4248 (is_delayed_branch): Use hash table.
4249 (print_insn): Renamed from print_insn_sparc, made static.
4250 Build and use hash table. If !sparc64, ignore sparc64 insns,
4251 and vice-versa if sparc64.
4252 (print_insn_sparc, print_insn_sparc64): New functions.
4253 (compare_opcodes): Move sparc64 opcodes to end.
4254 Print commutative insns with constant second.
4255 * sparc-opc.c (all non-v9 insns): Use flag F_NOTV9 instead of F_ALIAS.
4257 Tue Aug 1 00:12:49 1995 Ian Lance Taylor <ian@cygnus.com>
4259 * sh-dis.c (print_insn_shx): Remove unused local dslot. Use
4260 print_address_func for A_BDISP12 and A_BDISP8. Correct test which
4261 avoids printing a delay slot in a delay slot.
4262 * sh-opc.h (sh_table): Fully bracket last entry.
4264 Mon Jul 31 12:04:47 1995 Doug Evans <dje@canuck.cygnus.com>
4266 * sparc-opc.c (sllx, srax, srlx): Fix disassembly.
4268 Wed Jul 12 00:59:34 1995 Ken Raeburn <raeburn@kr-pc.cygnus.com>
4270 * configure.in: Get host_makefile_frag from ${srcdir}.
4272 * configure.in: Autoconfiscated. Check for string[s].h. Create
4273 config.h from config.in. Don't set up sysdep.h link.
4274 * sysdep.h: New file.
4275 * configure, config.in: New files, generated from configure.in.
4276 * Makefile.in: Updated to be processed autoconf-style.
4277 (distclean): Keep sysdep.h. Remove config.log and config.cache.
4278 (Makefile): Depend on config.status.
4279 (config.status): New rule.
4280 * configure.bat: Update Makefile substitutions.
4282 Tue Jul 11 14:23:37 1995 Jeff Spiegel <jeffs@lsil.com>
4284 * mips-opc.c (L1): Define.
4285 (mips_opcodes): Add R4010 instructions: flushi, flushd, flushid,
4286 addciu, madd, maddu, ffc, ffs, msub, msubu, selsi, selsr, waiti,
4289 Tue Jul 11 11:49:49 1995 Ian Lance Taylor <ian@cygnus.com>
4291 * mips-opc.c (mips_opcodes): For the move pseudo-op, prefer daddu
4292 if ISA 3 and addu otherwise, replacing or, since some MIPS chips
4293 have multiple add units but only a single logical unit.
4295 * ppc-opc.c (powerpc_operands): Change CR to use a bitsize of 3,
4296 shifted by 18, without any insertion or extraction function.
4297 (insert_cr, extract_cr): Remove.
4299 Wed Jun 21 20:05:39 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4301 * m68k-dis.c (print_insn_arg, print_indexed): Print "%" before
4304 Thu Jun 15 17:23:31 1995 Stan Shebs <shebs@andros.cygnus.com>
4306 * mpw-config.in: Add sh and i386 configs, remove sparc config.
4307 * sh-opc.h: Add copyright.
4309 Mon Jun 5 03:30:43 1995 Ken Raeburn <raeburn@kr-laptop.cygnus.com>
4311 * Makefile.in (crunch-m68k): Delete extra target accidentally
4312 checked in a while ago.
4314 Wed May 24 16:22:13 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4316 * sh-opc.h (sh_table): Add SH3 support.
4318 Wed May 24 14:16:08 1995 Steve Chamberlain <sac@slash.cygnus.com>
4320 * sh-opc.h: Added bsrf and braf.
4322 Wed May 10 14:28:16 1995 Richard Earnshaw (rearnsha@armltd.co.uk)
4324 * arm-opc.h (arm_opcodes): Add 64-bit multiply patterns. Delete
4325 bogus [ls]fm{ea,fd} patterns.
4327 * arm-opc.h (arm_opcodes): Correct typos in stm, ldm, std, and ldc.
4328 * arm-dis.c (print_insn_arm): Make GIVEN a parameter, don't try and
4329 initialize it from memory. Make function static.
4330 (print_insn_{big,little}_arm): New functions.
4331 * disassemble.c (disassembler, case bfd_arch_arm): Disassemble for
4332 the correct endianness.
4334 Mon Apr 24 14:18:05 1995 Jason Molenda (crash@phydeaux.cygnus.com>
4336 * sh-opc.h (sh_nibble_type, sh_arg_type): remove trailing , from
4339 Wed Apr 19 14:07:03 1995 Michael Meissner <meissner@tiktok.cygnus.com>
4341 * m68k-dis.c (opcode): Finish change made by Kung Hsu on April
4342 17th, so that it builds again using GCC as the compiler.
4344 Tue Apr 18 12:14:51 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4346 * mips-dis.c (print_insn_little_mips): Cast return value from
4347 bfd_getl32 from bfd_vma to unsigned long, because _print_insn_mips
4348 expects an unsigned long, and that might be fewer words of
4349 argument storage (e.g., if bfd_vma is long long on a 32-bit
4351 (print_insn_big_mips): Likewise with bfd_getb32 value.
4352 (_print_insn_mips): Now static.
4354 Mon Apr 17 12:23:28 1995 Kung Hsu <kung@rtl.cygnus.com>
4356 * m68k-dis.c: Take out #define BREAK_UP_BIG_DECL kludge, because
4357 gcc memory hog problem with initializer is fixed.
4359 Mon Apr 10 15:55:01 1995 Stan Shebs <shebs@andros.cygnus.com>
4361 Merge in support for Mac MPW as a host.
4362 (Old change descriptions retained for informational value.)
4364 * mpw-config.in (archname): Compute from the config.
4365 (BFD_MACHINES, ARCHDEFS): Put into mk.tmp.
4367 * mpw-config.in (target_arch): Compute from canonical target.
4368 (m68k, mips, powerpc, sparc): Add architectures.
4369 * mpw-make.in (disassemble.c.o): Add.
4370 (ALL_CFLAGS): Remove special flags (-mc68020 -mc68881 -model far).
4372 * mpw-config.in (BFD_MACHINES): Set to a default value.
4373 * mpw-make.in (BFD_MACHINES): Remove wired-in value.
4375 * mpw-make.in (CSEARCH): Add extra-include to search path.
4377 * mpw-config.in (varargs.h): Don't create.
4378 (sysdep.h): Create using forward-include.
4379 * mpw-make.in (CSEARCH): Add include/mpw to search path.
4381 * mpw-config.in: New file, MPW version of configure.in.
4382 * mpw-make.in: New file, MPW version of Makefile.in.
4384 Fri Mar 31 14:23:38 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4386 * alpha-dis.c (print_insn_alpha): Put empty statement after
4389 Tue Mar 21 10:51:40 1995 Jeff Law (law@snake.cs.utah.edu)
4391 * hppa-dis.c (sign_extend): Delete, redundant with libhppa.h version.
4392 (low_sign_extend): Likewise.
4393 (get_field): Delete unused function.
4394 (set_field, deposit_14, deposit_21): Likewise.
4396 Fri Mar 17 15:55:53 1995 J.T. Conklin <jtc@rtl.cygnus.com>
4398 * i386-dis.c: Support for more pentium opcodes. From Guy Harris
4401 Tue Mar 14 00:52:57 1995 Ken Raeburn (raeburn@kr-pc.cygnus.com)
4403 Sat Feb 11 17:22:41 1995 Klaus Kaempf (kkaempf@didymus.rmi.de)
4405 * alpha-opc.h (OSF_ASMCODE): define
4406 print pal-code names as defined in App C of the
4407 Alpha Architecture Reference Manual
4409 * alpha-dis.c: cleaned up output
4410 print stylized code forms as defined in App A.4.3 of the
4411 Alpha Architecture Reference Manual
4413 Wed Mar 8 15:21:14 1995 Ian Lance Taylor <ian@cygnus.com>
4415 * mips-opc.c: Add new mips4 instructions. Don't set INSN_RFE for
4417 * mips-dis.c (print_insn_arg): Handle new argument types 'h', 'R',
4420 Wed Mar 8 02:54:05 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4422 * m68k-dis.c (opcode): New function. Returns address of opcode
4423 table entry given index, even if the opcode table was split to
4424 work around gcc bugs.
4425 (print_insn_m68k): Call opcode instead of referencing m68k_opcodes
4427 (BREAK_UP_BIG_DECL): Make secondary array static and const.
4428 (reg_names): Now const.
4429 (print_insn_arg): Arrays cacheFieldName and names now const.
4430 (print_indexed): Array scales now const.
4432 Tue Mar 7 16:41:21 1995 Ian Lance Taylor <ian@cygnus.com>
4434 * ppc-opc.c: Sort recently added instructions by minor opcode
4435 number within major opcode number.
4437 Mon Mar 6 10:04:36 1995 Jeff Law (law@snake.cs.utah.edu)
4439 * hppa-dis.c: Include libhppa.h.
4441 Fri Feb 24 19:15:36 1995 Ian Lance Taylor <ian@cygnus.com>
4443 * mips-opc.c: Change dli to use M_DLI, and add dla.
4445 Mon Feb 20 23:54:38 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4447 * Makefile.in (ALL_MACHINES): Add w65-dis.o.
4449 Thu Feb 16 17:34:41 1995 Ian Lance Taylor <ian@cygnus.com>
4451 * mips-opc.c: Add r4650 mul instruction.
4453 Wed Feb 15 15:45:20 1995 Ian Lance Taylor <ian@cygnus.com>
4455 * mips-opc.c: Add uld and usd macros for unaligned double load and
4458 Tue Feb 14 13:17:37 1995 Michael Meissner <meissner@tiktok.cygnus.com>
4460 * ppc-opc.c (powerpc_opcodes): Add 403GA opcodes rfci, dccci,
4461 mfdcr, mtdcr, icbt, iccci.
4463 Thu Feb 9 12:28:13 1995 Stan Shebs <shebs@andros.cygnus.com>
4465 * i960-dis.c (struct tabent, struct sparse_tabent): Change the
4466 signed char fields to shorts, more portable.
4468 Wed Feb 8 17:29:29 1995 Stan Shebs <shebs@andros.cygnus.com>
4470 * i960-dis.c (struct tabent, struct sparse_tabent): Declare the
4471 char fields as signed chars, since they may have negative values.
4473 Mon Feb 6 10:52:06 1995 J.T. Conklin <jtc@rtl.cygnus.com>
4475 * i386-dis.c (dis386_twobyte): Add cpuid, From Charles Hannum
4476 (mycroft@netbsd.org).
4478 Mon Jan 30 12:38:00 1995 Ian Lance Taylor <ian@cygnus.com>
4480 From "Logg, Ed" <elogg@ea.com>:
4481 * ppc-opc.c (extract_bdm): Correct parenthezisation.
4482 * ppc-dis.c (print_insn_powerpc): Print .long before unrecognized
4485 Thu Jan 26 18:32:08 1995 Ian Lance Taylor <ian@cygnus.com>
4487 * ppc-opc.c: Changes based on patch from David Edelsohn
4488 <edelsohn@mhpcc.edu>.
4489 (powerpc_operands): Add operands SPRBAT and SPRG. Split TBR out of
4492 (insert_tbr): New static function.
4493 (extract_tbr): New static function.
4494 (XFXFXM_MASK, XFXM): Define.
4495 (XSPRBAT_MASK, XSPRG_MASK): Define.
4496 (powerpc_opcodes): Add instructions to access special registers by
4497 name. Add mtcr and mftbu.
4499 Tue Jan 17 10:56:43 1995 Ian Lance Taylor <ian@sanguine.cygnus.com>
4501 * mips-opc.c (P3): Define.
4502 (mips_opcodes): Add mad and madu.
4504 Sun Jan 15 16:32:59 1995 Steve Chamberlain <sac@splat>
4506 * configure.in: Add W65 support.
4507 * disassemble.c: Likewise.
4508 * w65-opc.h, w65-dis.c: New files.
4510 Wed Dec 28 22:15:33 1994 Steve Chamberlain (sac@jonny.cygnus.com)
4512 * h8300-dis.c (bfd_h8_disassemble): Add support for 2 bit
4515 Tue Dec 20 11:25:12 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4517 * mips-opc.c: Add dli as a synonym for li.
4519 Thu Dec 8 18:23:31 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
4521 * alpha-dis.c (print_insn_alpha): Handle call_pal instruction, and
4522 print something for reserved opcode values, even if it won't
4525 * mips-dis.c (_print_insn_mips): When initializing, shift right
4526 and mask, to avoid sign extension problems on the Alpha.
4528 * m68k-dis.c (print_insn_arg, case 'J'): Handle buscr and pcr
4531 Wed Nov 23 22:34:51 1994 Steve Chamberlain (sac@jonny.cygnus.com)
4533 * sh-opc.h (mov.l gbr): Get direction right.
4534 * sh-dis.c (print_insn_shx): New function.
4535 (print_insn_shl, print_insn_sh): Call print_insn_shx to
4536 print opcodes with right byte order.
4538 Thu Nov 3 19:32:22 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
4540 * ns32k-dis.c (struct ns32k_option): Renamed from struct option,
4541 to avoid conflicts with getopt.
4543 Mon Oct 31 18:48:10 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4545 * hppa-dis.c (print_insn_hppa): Read the instruction using
4546 bfd_getb32, so that it works on a little endian or 64 bit host.
4547 Remove unused local variable op.
4549 Tue Oct 25 17:07:57 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4551 * mips-opc.c: Use or instead of addu for pseudo-op move, since
4552 addu does not work correctly if -mips3.
4554 Wed Oct 19 13:40:16 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4556 * a29k-dis.c (print_special): Add special register names defined
4557 on 29030, 29040 and 29050.
4558 (print_insn): Handle new operand type 'I'.
4560 Wed Oct 12 11:59:55 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4562 * Makefile.in (INSTALL): Use top level install.sh script.
4564 Wed Oct 5 19:16:29 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4566 * sparc-dis.c: Rewrite to use bitfields, rather than a union, so
4567 that it works on a little endian host.
4569 Tue Oct 4 12:14:21 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4571 * configure.in: Use ${config_shell} when running config.bfd.
4573 Wed Sep 21 18:49:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4575 * mips-opc.c (mips_opcodes): "dabs" is only available with -mips3.
4577 Thu Sep 15 16:30:22 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4579 * a29k-dis.c (print_insn): Print the opcode.
4581 Wed Sep 14 17:52:14 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4583 * mips-opc.c (mips_opcodes): Set WR_t for sc and scd.
4585 Sun Sep 11 22:32:17 1994 Jeff Law (law@snake.cs.utah.edu)
4587 * hppa-dis.c (reg_names): Use r26-r23 for arg0-arg3.
4589 Tue Sep 6 11:37:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4591 * mips-opc.c: Set INSN_STORE_MEMORY flag for all instructions
4592 which store a value into memory.
4594 Sun Sep 04 17:58:10 1994 Richard Earnshaw (rwe@pegasus.esprit.ec.org)
4596 * configure.in, Makefile.in, disassemble.c: Add support for the ARM.
4597 * arm-dis.c, arm-opc.h: New files.
4599 Fri Aug 5 14:00:05 1994 Stan Shebs (shebs@andros.cygnus.com)
4601 * Makefile.in (ns32k-dis.o): Add dependency.
4602 * ns32k-dis.c (print_insn_arg): Declare initialized local as
4603 string, not as array of chars.
4605 Thu Jul 28 18:14:16 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4607 * sparc-dis.c (print_insn_sparc): Handle new operand type 'x'.
4609 * sparc-opc.c: Added sparclite extended FP operations, and
4610 versions of v9 impdep* instructions permitting specification of
4613 Tue Jul 26 16:36:03 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4615 * i960-dis.c (reg_names): Now const.
4616 (struct sparse_tabent): New type, copied from array type in mem
4618 (ctrl): Local static array ctrl_tab now const.
4619 (cobr): Local static array cobr_tab now const.
4620 (mem): Local variables reg1, reg2, reg3 now point to const. Local
4621 static variable mem_tab no longer explicitly initialized. Changed
4622 mem_init to const array of struct sparse_tabent.
4623 (reg): Local static variable reg_tab no longer explicitly
4624 initialized. Changed reg_init to const array of struct
4626 (ea): Local static array scale_tab now const.
4628 * i960-dis.c (reg): Added i960JX instructions to reg_init table.
4631 Tue Jul 19 21:00:00 1994 DJ Delorie (dj@ctron.com)
4633 * configure.bat: the disassember needs to be enabled for
4634 "objdump -d" to work in djgpp.
4636 Wed Jul 13 18:01:58 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4638 * ns32k-dis.c: Deleted all code in "#ifdef GDB".
4639 (invalid_float): Enabled general version, doesn't require running
4640 on ns32k host. Changed to take char* argument, and test for
4641 explicitly specified sizes, instead of using sizeof() on host CPU
4643 (INVALID_FLOAT): Cast first argument.
4644 (opt_u, opt_U, opt_O, opt_C, opt_S, list_P532, list_M532,
4645 list_P032, list_M032): Now const.
4646 (optlist, list_search): Made appropriate arguments now point to
4648 (print_insn_arg): Changed static array of one-character-string
4649 pointers into a static const array of characters; fixed sprintf
4650 statement accordingly.
4652 Sun Jul 10 00:27:47 1994 Ian Dall (dall@hfrd.dsto.gov.au)
4654 * opcodes/ns32k-dis.c: Semi-new file. Had apparently been dropped
4655 from distribution. A ns32k-dis.c from a previous distribution has
4656 been brought up to date and supports the new interface.
4658 * disassemble.c: define ARCH_ns32k and add case bfd_arch_ns32k.
4660 * configure.in: add bfd_ns32k_arch target support.
4662 * Makefile.in: add ns32k-dis.o to ALL_MACHINES.
4663 Add ns32k-dis.c to CFILES. Add dependencies for ns32k-dis.o.
4665 Wed Jun 29 22:10:37 1994 Steve Chamberlain (sac@cygnus.com)
4667 * h8300-dis.c (bfd_h8_disassemble): Get 16bit branch
4670 Tue Jun 28 13:22:06 1994 Stan Shebs (shebs@andros.cygnus.com)
4672 * h8300-dis.c, mips-dis.c: Don't use true and false.
4674 Thu Jun 23 12:53:19 1994 David J. Mackenzie (djm@rtl.cygnus.com)
4676 * configure.in: Change --with-targets to --enable-targets.
4678 Wed Jun 22 13:38:32 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4680 * mips-dis.c (_print_insn_mips): Build a static hash table mapping
4681 opcodes to the first instruction with that opcode, to speed
4682 disassembly of large files. From ralphc@pyramid.com (Ralph
4685 Tue Jun 7 12:49:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4687 * Makefile.in (mostlyclean): Fix typo (was mostyclean).
4689 Wed May 11 22:32:00 1994 DJ Delorie (dj@ctron.com)
4691 * configure.bat: update to latest makefile.in
4693 Sat May 7 17:13:21 1994 Steve Chamberlain (sac@cygnus.com)
4695 * a29k-dis.c (print_insn): Print 'x' type operand in hex.
4696 * h8300-dis.c (bfd_h8_disassemble): Print 16bit rels correctly.
4697 * sh-dis.c (print_insn_sh): Don't recur endlessly if delay
4698 slot insn is in a delay slot.
4699 * z8k-opc.h: (resflg): Fix patterns.
4700 * h8500-opc.h Fix CR insn patterns.
4702 Fri May 6 14:34:46 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4704 * ppc-opc.c (powerpc_opcodes): Put PowerPC versions of "cmp" and
4705 "cmpl" before POWER versions, so that gas -many uses them.
4707 Thu Apr 28 18:32:36 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4709 * disassemble.c: New file.
4710 * Makefile.in (OFILES): Add disassemble.o.
4711 (disassemble.o): Provide dependencies; compile with $(ARCHDEFS).
4712 * configure.in: Define ARCHDEFS in Makefile. Code taken from
4713 binutils/configure.in.
4715 * m68k-dis.c (print_insn_m68k): If F_ALIAS flag is set, skip the
4716 opcode being examined.
4718 Thu Apr 21 17:08:40 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4720 * ppc-opc.c (powerpc_operands): Added RAL, RAM and RAS.
4721 (insert_ral, insert_ram, insert_ras): New functions.
4722 (powerpc_opcodes): Use RAL for load with update, RAM for lmw, and
4723 RAS for store with update.
4725 Sat Apr 16 23:41:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4727 * ppc-opc.c (powerpc_opcodes): Correct fcir. From David Edelsohn
4728 (edelsohn@npac.syr.edu).
4730 Wed Apr 6 17:11:45 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4732 * mips-opc.c (mips_opcodes): Correct operands of "nor" with an
4735 Mon Apr 4 16:30:46 1994 Doug Evans (dje@canuck.cygnus.com)
4737 * sparc-opc.c (sparc_opcodes): Fix "rd %fprs,%l0".
4739 Mon Apr 4 13:22:00 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4741 * ppc-opc.c (powerpc_operands): The signedp field has been
4742 removed, so don't initialize it. Set the PPC_OPERAND_SIGNED flag
4743 instead. Add new operand SISIGNOPT.
4744 (powerpc_opcodes): For lis, liu, addis, and cau use SISIGNOPT.
4745 Based on patch from David Edelsohn (edelsohn@npac.syr.edu).
4746 * ppc-dis.c (print_insn_powerpc): Check PPC_OPERAND_SIGNED rather
4749 Wed Mar 30 00:31:49 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4751 * i386-dis.c (struct private): Renamed to dis_private. `private'
4752 is a reserved word for dynix cc.
4754 Mon Mar 28 13:00:15 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4756 * configure.in: Change error message to refer to bfd/config.bfd
4757 rather than bfd/configure.in.
4759 Mon Mar 28 12:28:30 1994 David Edelsohn (edelsohn@npac.syr.edu)
4761 * ppc-opc.c: Define POWER2 as short alias flag.
4762 (powerpc_opcodes): Add POWER/2 opcodes lfq*, stfq*, fcir[z], and
4765 Wed Mar 23 12:23:05 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4767 * i960-dis.c (print_insn_i960): Don't read a second word for
4768 opcodes 0, 1, 2 and 3.
4770 Wed Mar 16 15:37:58 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4772 * configure.in: Don't build m68881-ext.o for bfd_m68k_arch.
4774 Mon Mar 14 14:53:50 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4776 * m68881-ext.c: Removed; no longer used.
4777 * Makefile.in: Changed accordingly.
4779 * m68k-dis.c (ext_format_68881): Don't declare.
4780 (print_insn_m68k): If an instruction uses place 'i', it uses at
4781 least four fixed bytes.
4782 (print_insn_arg): Don't bump p by 2 for case 'I', place 'i'. For
4783 extended float, convert to double using floatformat_to_double, not
4784 ieee_extended_to_double, and fetch the data before converting it.
4786 Tue Mar 8 18:12:25 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4788 * mips-opc.c: It's sqrt.s, not sqrt.w. From
4789 davidj@ICSI.Berkeley.EDU (David Johnson).
4791 Tue Feb 8 16:55:27 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4793 * ppc-opc.c (powerpc_opcodes): The POWER uses bdn[l][a] where the
4794 PowerPC uses bdnz[l][a].
4796 Tue Feb 8 00:32:28 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4798 * dis-buf.c, i386-dis.c: Include sysdep.h.
4800 Mon Feb 7 19:22:23 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4802 * configure.in (bfd_powerpc_arch): Use ppc-dis.o and ppc-opc.o.
4804 * ppc-opc.c (powerpc_opcodes): Mark POWER instructions supported
4805 by Motorola PowerPC 601 with PPC_OPCODE_601.
4806 * ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc):
4807 Disassemble Motorola PowerPC 601 instructions as well as normal
4808 PowerPC instructions.
4810 Sun Feb 6 07:45:17 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
4812 * i960-dis.c (reg, mem): Just use a static array instead of
4815 Sat Feb 5 00:04:02 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
4817 * hppa-dis.c (print_insn_hppa): For '?' and '@' only adjust the
4818 condition name index if this is for a negated condition.
4820 * hppa-dis.c (print_insn_hppa): No space before 'H' operand.
4821 Floating point format for 'H' operand is backwards from normal
4822 case (0 == double, 1 == single). For '4', '6', '7', '9', and '8'
4823 operands (fmpyadd and fmpysub), handle bizarre register
4824 translation correctly for single precision format.
4826 * hppa-dis.c (print_insn_hppa): Do not emit a space after 'F'
4827 or 'I' operands if the next format specifier is 'M' (fcmp
4828 condition completer).
4830 Feb 4 23:38:03 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4832 * ppc-opc.c (powerpc_operands): New operand type MBE to handle a
4833 single number giving a bitmask for the MB and ME fields of an M
4834 form instruction. Change NB to accept 32, and turn it into 0;
4835 also turn 0 into 32 when disassembling. Seperated SH from NB.
4836 (insert_mbe, extract_mbe): New functions.
4837 (insert_nb, extract_nb): New functions.
4838 (SC_MASK): Mask out SA and LK bits.
4839 (powerpc_opcodes): Change "cal" to use RT, D, RA rather than RT,
4840 RA, SI. Change "liu" and "cau" to use UI rather than SI. Mark
4841 "bctr" and "bctrl" as accepted by POWER. Change "rlwimi",
4842 "rlimi", "rlwimi.", "rlimi.", "rlwinm", "rlinm", "rlwinm.",
4843 "rlinm.", "rlmi", "rlmi.", "rlwnm", "rlnm", "rlwnm.", "rlnm." to
4844 use MBE rather than MB. Add "mfmq" and "mtmq" POWER instructions.
4845 (powerpc_macros): Define table of macro definitions.
4846 (powerpc_num_macros): Define.
4848 * ppc-dis.c (print_insn_powerpc): Don't skip optional operands
4849 if PPC_OPERAND_NEXT is set.
4851 Sat Jan 22 23:10:07 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4853 * i960-dis.c (print_insn_i960): Make buffer bfd_byte instead of
4854 char. Retrieve contents using bfd_getl32 instead of shifting.
4856 Fri Jan 21 19:01:39 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4858 * ppc-opc.c: New file. Opcode table for PowerPC, including
4859 opcodes for POWER (RS/6000).
4860 * ppc-dis.c: New file. PowerPC and Power (RS/6000) disassembler.
4861 * Makefile.in (ALL_MACHINES): Add ppc-dis.o and ppc-opc.o.
4862 (CFILES): Add ppc-dis.c.
4863 (ppc-dis.o, ppc-opc.o): New targets.
4864 * configure.in: Build ppc-dis.o and ppc-opc.o for bfd_rs6000_arch.
4866 Mon Jan 17 20:05:49 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
4868 * hppa-dis.c (print_insn_hppa): Handle 'N' in assembler template.
4869 No space before 'u', 'f', or 'N'.
4871 Sun Jan 16 14:20:16 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
4873 * i386-dis.c (print_insn_i386): Add FIXME comment regarding reading
4874 farther than we should.
4876 * i386-dis.c (dis386): Use Yb and Yv for scasb and scasS.
4878 Thu Jan 6 12:38:05 1994 David J. Mackenzie (djm@thepub.cygnus.com)
4880 * sparc-dis.c m68k-dis.c alpha-dis.c a29k-dis.c: Fix comments.
4882 Wed Jan 5 11:56:21 1994 David J. Mackenzie (djm@thepub.cygnus.com)
4884 * i960-dis.c (print_insn_i960): Only read word2 if the instruction
4885 needs it, to prevent reading past the end of a section.
4887 Wed Nov 17 17:20:12 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4889 * mips-opc.h: Use macro for j instruction, to support SVR4 PIC.
4890 Removed t,A case for la; always use t,A(b) case.
4892 Mon Nov 8 12:37:36 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4894 From Ted Lemen <mellon@pepper.ncd.com>
4895 * mips-dis.c (print_insn_arg): Handle 'k'.
4896 * mips-opc.c: Make cache use k, not t.
4898 Sun Nov 7 23:52:34 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4900 * alpha-opc.h, alpha-dis.c (print_insn_alpha): Add
4901 FLOAT_MEMORY_FORMAT_CODE, FLOAT_BRANCH_FORMAT_CODE, correct
4902 FLOAT_FORMAT_CODE to put out floating point register names.
4904 Mon Nov 1 18:17:51 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4906 * mips-opc.c: Use macros for jal variants, to support SVR4 PIC.
4908 Thu Oct 28 17:42:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4910 * a29k-dis.c (print_insn): Use 0x%08x, not 0x%8x.
4912 Wed Oct 27 11:48:01 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4914 * mips-opc.c (dsll, dsra, dsrl): Added '>' cases for shift counts
4915 larger than 32. Moved dsxx32 variants first for disassembler.
4917 Mon Oct 25 11:33:14 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
4919 * z8kgen.c, z8k-opc.h: Add full lda information.
4921 Tue Oct 19 12:39:25 1993 Jeffrey A Law (law@cs.utah.edu)
4923 * hppa-dis.c (print_insn_hppa): Do not emit a space after
4924 movb instructions. Any necessary space will be emitted by
4925 the code to handle nullification completers.
4927 Wed Oct 13 16:19:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4929 * mips-opc.c: Moved l.d down so that it disassembles as ldc1.
4931 Fri Oct 8 02:34:21 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4933 * alpha-opc.h: Add ldl_l, fix typo for ldq_u.
4934 * alpha-dis.c (print_insn_alpha): Add code for PAL_FORMAT_CODE.
4936 Tue Oct 5 17:47:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4938 * mips-opc.c: Correct lwu opcode value (book had it wrong).
4940 Thu Sep 30 11:26:18 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
4942 * z8k-dis.c (FETCH_DATA): get just the right amount of data.
4943 (unpack_instr): Cope with ARG_IMM4M1 type instructions.
4945 Wed Sep 29 16:24:49 1993 K. Richard Pixley (rich@sendai.cygnus.com)
4947 * m88k-dis.c (m88kdis): comment change. Remove space after
4949 (printop): handle new arg types DEC and XREG for m88110.
4951 Tue Sep 28 19:20:16 1993 Jeffrey A Law (law@snake.cs.utah.edu)
4953 * hppa-dis.c (print_insn_hppa): Handle 'z' operand
4954 type for absolute branch addresses. Delete special
4955 "ble" and "be" code in 'W' operand code.
4957 Fri Sep 24 14:08:33 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4959 * mips-opc.c: Set hazard information correctly for branch
4960 likely instructions.
4962 Fri Sep 17 04:41:17 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4964 * alpha-dis.c (print_insn_alpha), alpha-opc.h: Fix bugs, use
4965 info->fprintf_func for printing and info->print_address_func for
4968 Wed Sep 15 12:12:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4970 * mips-opc.c: Set INSN_TRAP for tXX instructions.
4972 Thu Sep 9 10:11:27 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4974 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson):
4975 Corrected second case of "b" for disassembler.
4977 Tue Sep 7 14:25:15 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4979 * mips-dis.c, m88k-dis.c: Don't include libbfd.h. Changed calls
4980 to BFD swapping routines to correspond to BFD name changes.
4982 Thu Sep 2 10:35:25 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4984 * mips-opc.c: Change div machine instruction to be z,s,t rather
4985 than s,t. Change div macro to be d,v,t rather than d,s,t.
4986 Likewise for divu, ddiv, ddivu. Added z,s,t case for drem, dremu,
4987 rem and remu which generates only the corresponding div
4988 instruction. This is for compatibility with the MIPS assembler,
4989 which only generates the simple machine instruction when an
4990 explicit destination of $0 is used.
4991 * mips-dis.c (print_insn_arg): Handle 'z' (always register zero).
4993 Thu Aug 26 17:41:44 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4995 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Set
4996 WR_31 hazard for bal, bgezal, bltzal.
4998 Thu Aug 26 17:20:02 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5000 * hppa-dis.c (print_insn_hppa): Use print function
5001 from within the disassemble_info, not fprintf_filtered.
5003 Wed Aug 25 13:51:40 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5005 * hppa-dis.c (print_insn_hppa): Handle '|' like '>'. (From Jeff
5006 Law, law@cs.utah.edu.)
5008 Mon Aug 23 12:44:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5010 * mips-opc.c ("absu"): Removed.
5013 Fri Aug 20 10:52:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5015 * mips-opc.c: Added r6000 and r4000 instructions and macros.
5016 Changed hazard information to distinguish between memory load
5017 delays and coprocessor load delays.
5019 Wed Aug 18 15:39:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5021 * mips-opc.c: li.d uses "T,L", not "S,F". Added li.s.
5023 Tue Aug 17 09:44:42 1993 David J. Mackenzie (djm@thepub.cygnus.com)
5025 * configure.in: Don't pass cpu to config.bfd.
5027 Tue Aug 17 12:23:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5029 * m88k-dis.c (m88kdis): Make class unsigned.
5031 Thu Aug 12 15:08:18 1993 Ian Lance Taylor (ian@cygnus.com)
5033 * alpha-dis.c (print_insn_alpha): One branch format case was
5034 missing the instruction name.
5036 Wed Aug 11 19:29:39 1993 David J. Mackenzie (djm@thepub.cygnus.com)
5038 * Makefile.in (ALL_MACHINES): Renamed from DIS_LIBS.
5039 Add the arch-specific auxiliary files.
5040 (OFILES): Remove the arch-specific auxiliary files
5041 and use BFD_MACHINES instead of DIS_LIBS.
5042 * configure.in: Set BFD_MACHINES based on --with-targets option.
5044 Thu Aug 12 12:04:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5046 * mips-opc.c: Added lwc1 E,A(b) to go with lwc1 T,A(b). Similarly
5049 Sun Aug 8 15:09:30 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5051 * sparc-opc.c: Change CONST to const to deal with gcc
5052 -Dconst=__const -traditional.
5054 Fri Aug 6 10:58:55 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5056 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Took
5057 coprocessor instructions out of #if 0, and made them use new
5060 Thu Aug 5 17:11:06 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5062 * sparc-dis.c: Include ansidecl.h before opcodes/sparc.h.
5064 Fri Jul 30 18:48:15 1993 John Gilmore (gnu@cygnus.com)
5066 * sparc-opc.c: Add F_JSR, F_UNBR, or F_CONDBR flags to each branch
5067 instruction, for use by the disassembler.
5069 * sparc-dis.c (SEX): Add sign extension macro. Replace many
5070 hand-coded sign extensions that depended on 32-bit host ints.
5071 FIXME, we still depend on big-endian host bitfield ordering.
5072 (sparc_print_insn): Set the insn_info_valid field, and the
5073 other fields that describe the instruction being printed.
5075 Tue Jul 27 17:04:58 1993 Jim Wilson (wilson@sphagnum.cygnus.com)
5077 * sparc-opc.c (call): Accept all 6 addressing modes valid for
5078 `jmp' instead of just one of them.
5080 Wed Jul 21 11:43:32 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
5082 * hppa-dis.c: Move floating registers from reg_names to fp_reg_names.
5083 (fput_fp_reg_r): Renamed from fput_reg_r.
5084 (fput_fp_reg): New function.
5085 (print_insn_hppa): Use fput_fp_reg{,_r} where appropriate.
5087 * hppa-dis.c (print_insn_hppa, cases 'a', 'd'): Print space afterwards.
5089 * hppa-dis.c (print_insn_hppa, case 'd'): Use GET_COND not GET_FIELD.
5091 Mon Jul 19 13:52:21 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
5093 * hppa-dis.c (print_insn_hppa): Use extract_5r_store for 'r'.
5095 * hppa-dis.c (print_insn_hppa, case '>'): If next character is 'n',
5096 don't output a space.
5098 * hppa-dis.c (float_format_names): 10 is undefined, and 11 is quad.
5100 Sun Jul 18 16:30:02 1993 Jim Kingdon (kingdon@rtl.cygnus.com)
5102 * mips-opc.c: New file, containing opcode table from
5103 ../include/opcode/mips.h.
5104 * Makefile.in: Add it.
5106 Thu Jul 15 12:37:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5108 * m88k-dis.c: New file, moved in from gdb and changed to use the
5109 new dis-asm.h disassembler interface.
5110 * Makefile.in (DIS_LIBS): Added m88k-dis.o.
5111 (m88k-dis.o): New target.
5113 Tue Jul 13 10:04:16 1993 Ian Lance Taylor (ian@cygnus.com)
5115 * mips-dis.c (print_insn_arg, _print_insn_mips): Made pointer to
5116 argument string const char * to correspond to opcode/mips.h.
5118 Tue Jul 6 15:18:37 1993 Ian Lance Taylor (ian@cygnus.com)
5120 * mips-dis.c: Updated to account for name changes in new version
5122 * Makefile.in: Added header file dependencies.
5124 Sat Jul 3 23:47:56 1993 Doug Evans (dje@canuck.cygnus.com)
5126 * h8300-dis.c (bfd_h8_disassemble): Correct fetching of instruction.
5128 Thu Jul 1 12:23:38 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5130 * m68k-dis.c (NEXTWORD, NEXTLONG): Use ((x) ^ 0x8000) - 0x8000 to sign
5131 extend, rather than shifts.
5133 Sun Jun 20 20:56:56 1993 Ken Raeburn (raeburn@poseidon.cygnus.com)
5135 * Makefile.in: Undo 15 June change.
5137 Fri Jun 18 14:15:15 1993 Per Bothner (bothner@deneb.cygnus.com)
5139 * m68k-dis.c (print_insn_arg): Change return value to byte count
5141 * m68k-dis.c: Re-write to detect invalid operands before
5142 printing anything, so we can handle this the same way we
5143 handle invalid opcodes.
5145 Thu Jun 17 15:01:36 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
5147 * sh-dis.c, sh-opc.h: Understand some more opcodes.
5149 Wed Jun 16 13:48:05 1993 Ian Lance Taylor (ian@cygnus.com)
5151 * hppa-dis.c: Include <ansidecl.h> and sysdep.h before other
5154 Tue Jun 15 21:45:26 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5156 * sparc-dis.c: Don't declare qsort, since sysdep.h might.
5158 * configure.in: Do make sysdep.h link.
5159 * Makefile.in: Search ../include. Don't search ../bfd.
5161 Tue Jun 15 13:36:10 1993 Stu Grossman (grossman@cygnus.com)
5163 Changes from Jeff Law, law@cs.utah.edu:
5164 * hppa-dis.c: Fix typo. 'a' and 'd' were reversed.
5165 Do not print a space before the completers specified by
5168 Fri Jun 11 18:40:21 1993 Ken Raeburn (raeburn@cygnus.com)
5170 * mips-dis.c: No longer need to bomb out if HOST_64_BIT is
5171 defined, since gdb has been fixed.
5173 Changes from Jeff Law, law@cs.utah.edu:
5174 * hppa-dis.c (print_insn_hppa): Last argument to fput_reg,
5175 fput_reg_r, fput_creg, fput_const, and fputs_filtered should
5176 be a *disassemble_info, not a *FILE.
5177 * hppa-dis.c: Support 'd', '!', and 'a'.
5178 * hppa-dis.c: Support 's' to extract a 2 bit space register.
5179 * hppa-dis.c: Delete cases which are no longer needed.
5181 Fri Jun 11 07:53:48 1993 Jim Kingdon (kingdon@cygnus.com)
5183 * m68k-dis.c (print_insn_{m68k,arg}): Add MMU codes.
5185 Tue Jun 8 12:25:01 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
5187 * h8300-dis.c: New file, removed from bfd/cpu-h8300.c, with
5190 Mon Jun 7 12:58:49 1993 Per Bothner (bothner@rtl.cygnus.com)
5192 * Makefile.in (CSEARCH): Add -I../bfd for sysdep.h and bfd.h.
5193 * configure.in: No longer need to configure to get sysdep.h.
5195 Thu Jun 3 15:56:49 1993 Stu Grossman (grossman@cygnus.com)
5197 * Patches from Jeffrey Law <law@cs.utah.edu>.
5198 * hppa-dis.c: Support 'I', 'J', and 'K' in output
5199 templates for 1.1 FP computational instructions.
5201 Tue May 25 13:05:48 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5203 * h8500-dis.c (print_insn_h8500): Address argument is type
5205 * z8k-dis.c (print_insn_z8k, print_insn_z8001, print_insn_z8002):
5208 * h8500-opc.h (addr_class_type): No comma at end of enumerator.
5209 * sh-opc.h (sh_nibble_type, sh_arg_type): Ditto.
5211 * sparc-dis.c (compare_opcodes): Move static declaration to
5214 Fri May 21 14:17:37 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
5216 * sparc-dis.c (print_insn_sparc): Implement 'n' argument for unimp
5217 instruction, remove unimp hack from 'l' argument.
5219 Wed May 19 15:35:54 1993 Stu Grossman (grossman@cygnus.com)
5221 * z8k-dis.c (fetch_data): Use unsigned char to make ancient gcc's
5224 Fri May 14 15:22:46 1993 Ian Lance Taylor (ian@cygnus.com)
5226 * Based on patches from davidj@ICSI.Berkeley.EDU (David Johnson):
5227 * mips-dis.c (print_insn_arg): Handle 'C' for general coprocessor
5230 Fri May 14 00:09:14 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5232 * hppa-dis.c: Include dis-asm.h before sysdep.h. Changed some
5233 arrays of string pointers to 2-d arrays of chars, to save
5236 Thu May 6 20:51:17 1993 Fred Fish (fnf@cygnus.com)
5238 * a29k-dis.c, alpha-dis.c, i960-dis.c, sparc-dis.c, z8k-dis.c:
5239 Cast second arg to read_memory_func to "bfd_byte *", as necessary.
5241 Tue May 4 20:31:10 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5243 * hppa-dis.c: New file from Utah, adapted to new disassembler
5245 * Makefile.in: Include it.
5247 Mon Apr 26 18:17:42 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5249 * sh-dis.c, sh-opc.h: New files.
5251 Fri Apr 23 18:51:22 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5253 * alpha-dis.c, alpha-opc.h: New files.
5255 Tue Apr 6 12:54:08 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
5257 * mips-dis.c: Sign extend 'j' and 'b' arguments, delta is a signed
5260 Mon Apr 5 17:37:37 1993 John Gilmore (gnu@cygnus.com)
5262 * sparc-dis.c: Make "ta" the default trap instruction, "t" the alias.
5264 Fri Apr 2 07:24:27 1993 Ian Lance Taylor (ian@cygnus.com)
5266 * a29k-dis.c, sparc-dis.c, sparc-opc.c: Use CONST rather than
5269 Thu Apr 1 11:20:43 1993 Jim Kingdon (kingdon@cygnus.com)
5271 * sparc-dis.c: Use fprintf_func a few places where I forgot,
5272 and double percent signs a few places.
5274 * a29k-dis.c, i960-dis.c: New, merged from gdb and binutils.
5276 * i386-dis.c, m68k-dis.c, mips-dis.c, sparc-dis.c:
5277 Use info->print_address_func not print_address.
5279 * dis-buf.c (generic_print_address): New function.
5281 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5283 * Makefile.in: Add sparc-dis.c.
5284 sparc-dis.c: New file, merges binutils and gdb versions as follows:
5286 Add `add' instruction to the set that get checked
5287 for a preceding `sethi' in order to print an absolute address.
5288 * (print_insn): Disassembly prefers real instructions.
5289 (is_delayed_branch): Speed up.
5290 * sparc-opcode.h: Add ALIAS bit to aliases. Fix up opcode tables.
5291 Still missing some float ops, and needs testing.
5292 * sparc-pinsn.c (print_insn): Eliminate 'set' test, subsumed by
5293 F_ALIAS. Use printf, not fprintf, when not passing a file
5295 (compare_opcodes): Check that identical instructions have
5296 identical opcodes, complain otherwise.
5299 * Include reg_names.
5301 Use dis-asm.h/read_memory_func interface.
5303 Wed Mar 31 20:49:06 1993 K. Richard Pixley (rich@rtl.cygnus.com)
5305 * h8500-dis.c, i386-dis.c, m68k-dis.c, z8k-dis.c (fetch_data):
5306 deliberately return non-zero to setjmp from longjmp. Otherwise
5307 this code fails to compile.
5309 Wed Mar 31 17:04:31 1993 Stu Grossman (grossman@cygnus.com)
5311 * m68k-dis.c: Fix prototype for fetch_arg().
5313 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5315 * dis-buf.c: New file, for new read_memory_func interface.
5316 Makefile.in (OFILES): Include it.
5317 m68k-dis.c, i386-dis.c, h8500-dis.c, mips-dis.c, z8k-dis.c:
5318 Use new read_memory_func interface.
5320 Mon Mar 29 14:02:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5322 * h8500-dis.c (print_insn_h8500): Get sign of fp offsets right.
5323 * h8500-opc.h: Fix couple of opcodes.
5325 Wed Mar 24 02:03:36 1993 david d `zoo' zuhn (zoo at poseidon.cygnus.com)
5327 * Makefile.in: add dvi & installcheck targets
5329 Mon Mar 22 18:55:04 1993 John Gilmore (gnu@cygnus.com)
5331 * Makefile.in: Update for h8500-dis.c.
5333 Fri Mar 19 14:27:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5335 * h8500-dis.c, h8500-opc.h: New files
5337 Thu Mar 18 14:12:37 1993 Per Bothner (bothner@rtl.cygnus.com)
5339 * mips-dis.c, z8k-dis.c: Converted to use interface defined in
5340 ../include/dis-asm.h.
5341 * m68k-dis.c: New file (merge of ../binutils/m68k-pinsn.c
5342 and ../gdb/m68k-pinsn.c).
5343 * i386-dis.c: New file (merge of ../binutils/i386-pinsn.c
5344 and ../gdb/i386-pinsn.c).
5345 * m68881-ext.c: New file. Moved definition of
5346 ext_format ext_format_68881 from ../gdb/m68k-tdep.c.
5347 * Makefile.in: Adjust for new files.
5348 * i386-dis.c: Patches from John Hassey (hassey@dg-rtp.dg.com).
5349 * m68k-dis.c: Recognize '9' placement code, so (say) pflush
5350 can be dis-assembled.
5352 Wed Feb 17 09:19:47 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5354 * mips-dis.c (print_insn_arg): Now returns void.
5356 Mon Jan 11 16:09:16 1993 Fred Fish (fnf@cygnus.com)
5358 * mips-dis.c (ansidecl.h): Include for benefit of sysdep.h
5359 files that use the macros.
5361 Thu Jan 7 13:15:17 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5363 * mips-dis.c: New file, from gdb/mips-pinsn.c.
5364 * Makefile.in (DIS_LIBS): Added mips-dis.o.
5365 (CFILES): Added mips-dis.c.
5367 Thu Jan 7 07:36:33 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5369 * z8k-dis.c (print_insn_z8001, print_insn_z8002): new routines
5370 * z8kgen.c, z8k-opc.h: fix sizes of some shifts.
5372 Tue Dec 22 15:42:44 1992 Per Bothner (bothner@rtl.cygnus.com)
5374 * Makefile.in: Improve *clean rules.
5375 * configure.in: Allow a default host.
5377 Tue Nov 17 19:53:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5379 * Makefile.in: also use -I$(srcdir)/../bfd, since some sysdep
5380 files include other sysdep files
5382 Thu Nov 12 16:10:37 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5384 * z8k-dis.c z8k-opc.h z8kgen.c: checkpoint
5386 Fri Oct 9 04:56:05 1992 John Gilmore (gnu@cygnus.com)
5388 * configure.in: For host support, use ../bfd/configure.host
5389 so it stays in sync with the ../bfd/hosts database.
5391 Thu Oct 1 23:38:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5393 * configure.in: use cpu-vendor-os triple instead of nested cases
5395 Wed Sep 30 16:09:20 1992 Michael Werner (mtw@cygnus.com)
5397 * z8k-dis.c (unparse_instr): fix bug where opcode returned was
5398 *always* the wrong one.
5400 Wed Sep 30 07:42:17 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5402 * z8kgen.c: added copyright info
5404 Tue Sep 29 12:20:21 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5406 * z8k-dis.c (unparse_instr): prettier tabs
5407 * z8kgen.c -> z8k-opc.h: bug fixes in tables
5409 Fri Sep 25 12:50:32 1992 Stu Grossman (grossman at cygnus.com)
5411 * configure.in: Add ncr* configuration.
5412 * z8k-dis.c (struct instr_data_s): Make instr_asmsrc char to make
5413 picayune ANSI compilers happy.
5415 Sep 20 08:50:55 1992 Fred Fish (fnf@cygnus.com)
5417 * configure.in (i386): Make i386 and i486 synonymous for now.
5418 * configure.in (i[34]86-*-sysv4): Add my_host definition.
5420 Fri Sep 18 17:01:23 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
5422 * Makefile.in (install): Fix typo.
5424 Fri Sep 18 02:04:24 1992 John Gilmore (gnu@cygnus.com)
5426 * Makefile.in (make): Remove obsolete crud.
5427 (sparc-opc.o): Avoid Sun Make VPATH bug.
5429 Tue Sep 8 17:29:27 1992 K. Richard Pixley (rich@sendai.cygnus.com)
5431 * Makefile.in: since there are no SUBDIRS, remove rule and
5432 references of subdir_do.
5434 Tue Sep 8 17:02:58 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
5436 * Makefile.in (install): Get the library name right here too.
5437 Don't install bfd.h, since it's unrelated to this library. No
5438 subdirs to recurse into, either.
5439 (CFILES): The source file has a .c suffix, not .o.
5441 * sparc-opc.c: New file, moved from BFD.
5442 * Makefile.in (OFILES): Build it.
5444 Thu Sep 3 16:59:20 1992 Michael Werner (mtw@cygnus.com)
5446 * z8k-dis.c: fixed forward refferences of some declarations.
5448 Mon Aug 31 16:09:45 1992 Michael Werner (mtw@cygnus.com)
5450 * Makefile.in: get the name of the library right
5452 Mon Aug 31 13:47:35 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5454 * z8k-dis.c: knows how to disassemble z8k stuff
5455 * z8k-opc.h: new file full of z8000 opcodes
5459 version-control: never