opcodes/ChangeLog

   1 2009-11-17  Quentin Neill  <quentin.neill@amd.com>
   2             Sebastian Pop  <sebastian.pop@amd.com>
   3
   4         * i386-dis.c (get_vex_imm8): Increase bytes_before_imm when
   5         decoding the second source operand from the immediate byte.
   6         (OP_EX_VexW): Pass an extra integer to identify the second
   7         and third source arguments.
   8
   9 2009-11-19  H.J. Lu  <hongjiu.lu@intel.com>
  10
  11         * i386-opc.tbl: Add IsLockable to cmpxch16b.
  12         * i386-tbl.h: Regenerated.
  13
  14 2009-11-19  Nick Clifton  <nickc@redhat.com>
  15
  16         PR binutils/10924
  17         * arm-dis.c (print_insn_arm): Do not print an offset of zero when
  18         decoding Immediaate Offset addressing.
  19
  20 2009-11-18  Sebastian Pop  <sebastian.pop@amd.com>
  21
  22         PR binutils/10973
  23         * i386-dis.c (get_vex_imm8): Do not increment codep.
  24         Avoid incrementing bytes_before_imm when OP_E_memory
  25         has already forwarded the codep pointer.
  26         (OP_EX_VexW): Increment codep to skip mod/rm byte.
  27
  28 2009-11-18  Sebastian Pop  <sebastian.pop@amd.com>
  29
  30         * i386-dis.c (VEX_LEN_XOP_08_A0): Removed.
  31         (VEX_LEN_XOP_08_A1): Removed.
  32         (xop_table): Remove entries for VEX_LEN_XOP_08_A0 and
  33         VEX_LEN_XOP_08_A1.
  34         (vex_len_table): Same.
  35         * i386-gen.c (CPU_CVT16_FLAGS): Removed.
  36         (cpu_flags): Remove field for CpuCVT16.
  37         * i386-opc.h (CpuCVT16): Removed.
  38         (i386_cpu_flags): Remove bitfield cpucvt16.
  39         (i386-opc.tbl): Remove CVT16 instructions.
  40         * i386-init.h: Regenerated.
  41         * i386-tbl.h: Regenerated.
  42
  43 2009-11-17  Sebastian Pop  <sebastian.pop@amd.com>
  44             Quentin Neill  <quentin.neill@amd.com>
  45
  46         * i386-dis.c (OP_Vex_2src_1): New.
  47         (OP_Vex_2src_2): New.
  48         (Vex_2src_1): New.
  49         (Vex_2src_2): New.
  50         (XOP_08): Added.
  51         (VEX_LEN_XOP_08_A0): Added.
  52         (VEX_LEN_XOP_08_A1): Added.
  53         (VEX_LEN_XOP_09_80): Added.
  54         (VEX_LEN_XOP_09_81): Added.
  55         (xop_table): Added an entry for XOP_08.  Handle xop instructions.
  56         (vex_len_table): Added entries for VEX_LEN_XOP_08_A0,
  57         VEX_LEN_XOP_08_A1, VEX_LEN_XOP_09_80, VEX_LEN_XOP_09_81.
  58         (get_valid_dis386): Handle XOP_08.
  59         (OP_Vex_2src): New.
  60         * i386-gen.c (cpu_flag_init): Add CPU_XOP_FLAGS and CPU_CVT16_FLAGS.
  61         (cpu_flags): Add CpuXOP and CpuCVT16.
  62         (opcode_modifiers): Add XOP08, Vex2Sources.
  63         * i386-opc.h (CpuXOP): Added.
  64         (CpuCVT16): Added.
  65         (i386_cpu_flags): Add cpuxop and cpucvt16.
  66         (XOP08): Added.
  67         (Vex2Sources): Added.
  68         (i386_opcode_modifier): Add xop08, vex2sources.
  69         * i386-opc.tbl: Add entries for XOP and CVT16 instructions.
  70         * i386-init.h: Regenerated.
  71         * i386-tbl.h: Regenerated.
  72
  73 2009-11-17  Nick Clifton  <nickc@redhat.com>
  74
  75         PR binutils/10924
  76         * arm-dis.c (arm_opcodes): Add patterns to match undefined LDRB
  77         instruction variants.  Add pattern for MRS variant that was being
  78         confused with CMP.
  79         (arm_decode_shift): Place error message in a comment.
  80         (print_insn_arm): Note that writing back to the PC is
  81         unpredictable.
  82         Only print 'p' variants of cmp/cmn/teq/tst instructions if
  83         decoding for pre-V6 architectures.
  84
  85 2009-11-17  Edward Nevill <edward.nevill@arm.com>
  86
  87         * arm-dis.c (print_insn_thumb32): Handle undefined instruction.
  88
  89 2009-11-14  Doug Evans  <dje@sebabeach.org>
  90
  91         * Makefile.am (stamp-xc16x): Use ../cpu/xc16x.cpu instead of
  92         ../cgen/cpu.
  93         * Makefile.in: Regenerate.
  94
  95 2009-11-13  H.J. Lu  <hongjiu.lu@intel.com>
  96
  97         * i386-dis.c (OP_E_extended): Removed.
  98
  99 2009-11-13  H.J. Lu  <hongjiu.lu@intel.com>
 100
 101         * i386-dis.c (print_insn): Check rex_ignored.
 102
 103 2009-11-13  H.J. Lu  <hongjiu.lu@intel.com>
 104
 105         * i386-dis.c (ckprefix): Updated to return 0 if number of
 106         prefixes > 14 and record the last position for each prefix.
 107         (lock_prefix): Removed.
 108         (data_prefix): Likewise.
 109         (addr_prefix): Likewise.
 110         (repz_prefix): Likewise.
 111         (repnz_prefix): Likewise.
 112         (last_lock_prefix): New.
 113         (last_repz_prefix): Likewise.
 114         (last_repnz_prefix): Likewise.
 115         (last_data_prefix): Likewise.
 116         (last_addr_prefix): Likewise.
 117         (last_rex_prefix): Likewise.
 118         (last_seg_prefix): Likewise.
 119         (MAX_CODE_LENGTH): Likewise.
 120         (ADDR16_PREFIX): Likewise.
 121         (ADDR32_PREFIX): Likewise.
 122         (DATA16_PREFIX): Likewise.
 123         (DATA32_PREFIX): Likewise.
 124         (REP_PREFIX): Likewise.
 125         (seg_prefix): Likewise.
 126         (all_prefixes): Change size to MAX_CODE_LENGTH - 1.
 127         (prefix_name): Handle ADDR16_PREFIX, ADDR32_PREFIX,
 128         DATA16_PREFIX, DATA32_PREFIX and REP_PREFIX.
 129         (get_valid_dis386): Updated.
 130         (OP_C): Likewise.
 131         (OP_Monitor): Likewise.
 132         (REP_Fixup): Likewise.
 133         (print_insn): Display all prefixes.
 134         (putop): Set PREFIX_DATA on used_prefixes only if it is used.
 135         (intel_operand_size): Likewise.
 136         (OP_E_register): Likewise.
 137         (OP_G): Likewise.
 138         (OP_REG): Likewise.
 139         (OP_IMREG): Likewise.
 140         (OP_I): Likewise.
 141         (OP_I64): Likewise.
 142         (OP_sI): Likewise.
 143         (CRC32_Fixup): Likewise.
 144         (MOVBE_Fixup): Likewise.
 145         (OP_E_memory): Set REFIX_DATA on used_prefixes when it is used
 146         in 16bit mode.
 147         (OP_J): Set REX_W used if it is used. Set PREFIX_DATA on
 148         used_prefixes only if it is used.
 149
 150 2009-11-12  H.J. Lu  <hongjiu.lu@intel.com>
 151
 152         * i386-opc.tbl: Remove IsLockable from add, adc, and, dec, inc,
 153         or, sbb, sub, xor and xchg with register only operands.
 154         * i386-tbl.h: Regenerated.
 155
 156 2009-11-12  H.J. Lu  <hongjiu.lu@intel.com>
 157
 158         * i386-gen.c (opcode_modifiers): Add IsLockable.
 159
 160         * i386-opc.h (IsLockable): New.
 161         (i386_opcode_modifier): Add islockable.
 162
 163         * i386-opc.tbl: Add IsLockable to add, adc, and, btc, btr,
 164         bts, cmpxchg, cmpxch8b, dec, inc, neg, not, or, sbb, sub,
 165         xor, xadd and xchg.
 166         * i386-tbl.h: Regenerated.
 167
 168 2009-11-12  Daniel Jacobowitz  <dan@codesourcery.com>
 169
 170         * arm-dis.c (coprocessor_opcodes): Use %A instead of %C.  Remove
 171         generic coprocessor instructions for FPA loads and stores.
 172         (print_insn_coprocessor): Remove %C support.  Display address for
 173         PC-relative offsets in %A.
 174
 175 2009-11-11  H.J. Lu  <hongjiu.lu@intel.com>
 176
 177         * i386-dis.c (all_prefixes): New.
 178         (ckprefix): Set all_prefixes.
 179         (print_insn): Print all_prefixes instead of lock_prefix,
 180         repz_prefix, repnz_prefix, addr_prefix and data_prefix.
 181
 182 2009-11-11  Nick Clifton  <nickc@redhat.com>
 183
 184         PR binutils/10924
 185         * arm-dis.c (UNPREDICTABLE_INSTRUCTION): New macro.
 186         (print_insn_arm): Extend %s format control code to check for
 187         unpredictable addressing modes.  Add support for %S format control
 188         code which suppresses this check.
 189         (W_BIT, I_BIT, U_BIT, P_BIT): New macros.
 190         (WRITEBACK_BIT_SET, IMMEDIATE_BIT_SET, NEGATIVE_BIT_SET,
 191         PRE_BIT_SET): New macros.
 192         (print_insn_coprocessor): Use the new macros instead of magic
 193         constants.
 194         (print_arm_address): Likewise.
 195         (pirnt_insn_arm): Likewise.
 196         (print_insn_thumb32): Likewise.
 197
 198 2009-11-11  Nick Clifton  <nickc@redhat.com>
 199
 200         * po/id.po: Updated Indonesian translation.
 201
 202 2009-11-10  Maxim Kuvyrkov  <maxim@codesourcery.com>
 203
 204         * m68k-dis.c (print_insn_arg): Handle RGPIOBAR, ACR[4-7] and MBAR[01].
 205
 206 2009-11-06  Sebastian Pop  <sebastian.pop@amd.com>
 207
 208         * i386-dis.c (reg_table): Add XOP_8F_TABLE (XOP_09) to
 209         reg_table[REG_8F][1]: for XOP instructions, ModRM.reg first points to
 210         B.mm in the RXB.mmmmm byte, and so when B is set, we still should use
 211         the xop_table.
 212         (get_valid_dis386): Removed unused condition (from cut/n/paste) for
 213         XOP instructions.
 214
 215 2009-11-05  Sebastian Pop  <sebastian.pop@amd.com>
 216             Quentin Neill  <quentin.neill@amd.com>
 217
 218         * opcodes/i386-dis.c (OP_LWPCB_E): New.
 219         (OP_LWP_E): New.
 220         (OP_LWP_I): New.
 221         (USE_XOP_8F_TABLE): New.
 222         (XOP_8F_TABLE): New.
 223         (REG_XOP_LWPCB): New.
 224         (REG_XOP_LWP): New.
 225         (XOP_09): New.
 226         (XOP_0A): New.
 227         (reg_table): Redirect REG_8F to XOP_8F_TABLE.
 228         Add entries for REG_XOP_LWPCB and REG_XOP_LWP.
 229         (xop_table): New.
 230         (get_valid_dis386): Handle USE_XOP_8F_TABLE.
 231         Use the offsets VEX_0F, VEX_0F38, and VEX_0F3A instead of their values
 232         to access to the vex_table.
 233         (OP_LWPCB_E): New.
 234         (OP_LWP_E): New.
 235         (OP_LWP_I): New.
 236         * opcodes/i386-gen.c (cpu_flag_init): Add CPU_LWP_FLAGS, CpuLWP.
 237         (cpu_flags): Add CpuLWP.
 238         (opcode_modifiers): Add VexLWP, XOP09, and XOP0A.
 239         * opcodes/i386-opc.h (CpuLWP): New.
 240         (i386_cpu_flags): Add bit cpulwp.
 241         (VexLWP): New.
 242         (XOP09): New.
 243         (XOP0A): New.
 244         (i386_opcode_modifier): Add vexlwp, xop09, and xop0a.
 245         * opcodes/i386-opc.tbl (llwpcb): Added.
 246         (lwpval): Added.
 247         (lwpins): Added.
 248
 249 2009-11-04  DJ Delorie  <dj@redhat.com>
 250
 251         * rx-decode.opc (rx_decode_opcode) (mvtipl): Add.
 252         (mvtcp, mvfcp, opecp): Remove.
 253         * rx-decode.c: Regenerate.
 254         * rx-dis.c (cpen): Remove.
 255
 256 2009-11-03  Doug Evans  <dje@sebabeach.org>
 257
 258         * m32c-desc.c: Regenerate.
 259         * mep-desc.c: Regenerate.
 260
 261 2009-11-02  Paul Brook  <paul@codesourcery.com>
 262
 263         * arm-dis.c (coprocessor_opcodes): Update to use new feature flags.
 264         Add VFPv4 instructions.
 265
 266 2009-10-29  Sebastian Pop  <sebastian.pop@amd.com>
 267
 268         * i386-dis.c (OP_VEX_FMA): Removed.
 269         (VexFMA): Removed.
 270         (Vex128FMA): Removed.
 271         (prefix_table): First source operand of FMA4 insns is decoded
 272         with Vex not with VexFMA.
 273         (OP_EX_VexW): Second source operand is decoded with get_vex_imm8
 274         when vex.w is set.  Third source operand is decoded with
 275
 276 2009-10-27  Alan Modra  <amodra@bigpond.net.au>
 277
 278         * Makefile.am (HFILES): Remove cgen-ops.h and cgen-types.h.
 279         * Makefile.in: Regenerate.
 280         * po/POTFILES.in: Regenerate.
 281
 282 2009-10-23  Doug Evans  <dje@sebabeach.org>
 283
 284         * cgen-ops.h: Delete, moved to ../include/cgen/basic-ops.h.
 285         * cgen-types.h: Delete, moved to ../include/cgen/basic-modes.h.
 286         * cgen-bitset.c: Update.
 287         * fr30-desc.h: Regenerate.
 288         * frv-desc.h: Regenerate.
 289         * ip2k-desc.h: Regenerate.
 290         * iq2000-desc.h: Regenerate.
 291         * lm32-desc.h: Regenerate.
 292         * m32c-desc.h: Regenerate.
 293         * m32c-opc.h: Regenerate.
 294         * m32r-desc.h: Regenerate.
 295         * mep-desc.h: Regenerate.
 296         * mt-desc.h: Regenerate.
 297         * openrisc-desc.h: Regenerate.
 298         * xc16x-desc.h: Regenerate.
 299         * xstormy16-desc.h: Regenerate.
 300
 301 2009-10-22  DJ Delorie  <dj@redhat.com>
 302
 303         * rx-decode.opc (decode_opcode): Fix flags for MUL, SUNTIL, and SWHILE.
 304         * rx-decode.c: Regenerated.
 305
 306 2009-10-20  H.J. Lu  <hongjiu.lu@intel.com>
 307
 308         PR gas/10775
 309         * i386-dis.c: Document LB, LS and LV macros.
 310         (dis386): Use mov%LB, mov%LS and mov%LV on mov instruction
 311         with the 64-bit displacement or immediate operand.
 312         (putop): Handle LB, LS and LV macros.
 313
 314 2009-10-18  Doug Evans  <dje@sebabeach.org>
 315
 316         * lm32-opinst.c: Regenerate.
 317         * m32c-desc.c: Regenerate.
 318         * m32r-opinst.c: Regenerate.
 319         * openrisc-ibld.c: Regenerate.
 320         * xc16x-desc.c: Regenerate.
 321         * xc16x-desc.h: Regenerate.
 322
 323 2009-10-17  Doug Evans  <dje@sebabeach.org>
 324
 325         * Makefile.am (CGEN_CPUS): Add iq2000, lm32.
 326         (FR30_DEPS, FRV_DEPS, IQ2000_DEPS): Move so all cgen *_DEPS are
 327         sorted alphabetically.
 328         (stamp-fr30, stamp-frv, stamp-iq2000, stamp-xc16x): Move so all cgen
 329         stamp-* rules are sorted alphabetically.
 330         * Makefile.in: Regenerate.
 331
 332 2009-10-16  H.J. Lu  <hongjiu.lu@intel.com>
 333
 334         * i386-opc.h: Use enum instead of nested macros.
 335
 336 2009-10-16  H.J. Lu  <hongjiu.lu@intel.com>
 337
 338         * i386-dis.c: Simplify enums.
 339
 340 2009-10-15  H.J. Lu  <hongjiu.lu@intel.com>
 341             Ineiev <ineiev@gmail.com>
 342
 343         PR binutils/10767
 344         * i386-dis.c: Use enum instead of nested macros.
 345
 346 2009-10-15  H.J. Lu  <hongjiu.lu@intel.com>
 347
 348         * i386-dis.c (MAX_BYTEMODE): Removed.
 349
 350 2009-10-14  Tomas Hurka  <tom@hukatronic.cz>
 351
 352         PR 969
 353         * m68k-opc.c (m68k_opcodes): Correct mask for macl and msacl.
 354
 355 2009-10-13  H.J. Lu  <hongjiu.lu@intel.com>
 356
 357         * i386-dis.c (print_insn): Always clear need_vex, need_vex_reg
 358         and vex_w_done.
 359
 360 2009-10-07  Michael Eager  <eager@eagercon.com>
 361
 362         * microblaze-dis.c: Add include for microblaze-dis.h,
 363         eliminate local extern decls.
 364         * microblaze-dis.h: New.
 365
 366 2009-10-06  Nick Clifton  <nickc@redhat.com>
 367
 368         * po/fi.po: Updated Finnish translation.
 369
 370 2009-10-03  Andreas Schwab  <schwab@linux-m68k.org>
 371
 372         * opc2c.c: Include "libiberty.h" and <errno.h>.
 373         (orig_filename): Constify.
 374         (dump_lines): Fix line number directive.
 375         (main): Set orig_filename to basename of input file.  Use
 376         xstrerror.
 377
 378         * Makefile.am (rx-dis.lo): Remove explicit dependencies.
 379         ($(srcdir)/rx-decode.c): Use @MAINT@.  Use $(EXEEXT_FOR_BUILD)
 380         instead of $(EXEEXT).
 381         (opc2c$(EXEEXT_FOR_BUILD)): Renamed from opc2c$(EXEEXT) and use
 382         $(LINK_FOR_BUILD).  Link with libiberty.
 383         (MOSTLYCLEANFILES): Add opc2c$(EXEEXT_FOR_BUILD).
 384         (MAINTAINERCLEANFILES): Add $(srcdir)/rx-decode.c.
 385         * Makefile.in: Regenerated.
 386         * rx-decode.c: Regenerated.
 387
 388 2009-10-03  Paul Reed  <paulreed@paddedcell.com>
 389
 390         * arm-dis.c (print_insn): Check symtab_size not *symtab.
 391
 392 2009-10-02  H.J. Lu  <hongjiu.lu@intel.com>
 393
 394         * i386-opc.tbl: Drop Disp64 on jump and loop instructions.
 395         * i386-tbl.h: Regenerated.
 396
 397 2009-10-02  Peter Bergner  <bergner@vnet.ibm.com>
 398
 399         * ppc-dis.c (ppc_opts): Add "476" entry.
 400         * ppc-opc.c (PPC476): Define.
 401         (powerpc_opcodes): Update mnemonics where required for 476.
 402
 403 2009-10-01  Peter Bergner  <bergner@vnet.ibm.com>
 404
 405         * ppc-opc.c (PPCA2): Use renamed mask PPC_OPCODE_A2.
 406         * ppc-dis.c (ppc_opts): Likewise.
 407         Rename "ppca2" to "a2".
 408
 409 2009-10-01  M R Swami Reddy <MR.Swami.Reddy@nsc.com>
 410
 411         * crx-dis.c (match_opcode): Truncate mcode to 32-bit.
 412
 413 2009-09-29  DJ Delorie  <dj@redhat.com>
 414
 415         * Makefile.am: Add RX files.
 416         * configure.in: Add support for RX target.
 417         * disassemble.c: Likewise.
 418         * Makefile.in: Regenerate.
 419         * configure: Regenerate.
 420         * opc2c.c: New file.
 421         * rx-decode.c: New file.
 422         * rx-decode.opc: New file.
 423         * rx-dis.c: New file.
 424
 425 2009-09-29  Peter Bergner  <bergner@vnet.ibm.com>
 426
 427         * ppc-opc.c (powerpc_opcodes): Remove support for the the "lxsdux",
 428         "lxvd2ux", "lxvw4ux", "stxsdux", "stxvd2ux" and "stxvw4ux" opcodes.
 429
 430 2009-09-25  Michael Eager  <eager@eagercon.com>
 431
 432         * microblaze-dis.c (get_insn_microblaze, microblaze_get_target_address,
 433         microblaze_decode_insn): Add declarations.
 434         (get_delay_slots_microblaze): Remove.
 435
 436 2009-09-25  Martin Thuresson  <martint@google.com>
 437
 438         Update sources to make arc and arm targets compile cleanly with
 439         -Wc++-compat:
 440         * arc-dis.c Fix casts.
 441         * arc-ext.c: Add casts.
 442         * arm-dis.c (enum opcode_sentinel_enum): Gave name to anonymous
 443         enum.
 444
 445 2009-09-24  H.J. Lu  <hongjiu.lu@intel.com>
 446
 447         * i386-gen.c (opcode_modifiers): Remove Vex256.
 448         (set_bitfield): Handle XXX=V.
 449
 450         * i386-opc.h (Vex): Update comments.
 451         (Vex256): Removed.
 452         (VexNDS): Updated.
 453         (i386_opcode_modifier): Change vex to 2 bits.  Remove vex256.
 454
 455         * i386-opc.tbl: Replace "Vex|Vex256" with Vex=2.
 456         * i386-tbl.h: Regenerated.
 457
 458 2009-09-23  Nick Clifton  <nickc@redhat.com>
 459
 460         * po/fr.po: Updated French translation.
 461
 462 2009-09-21  Ben Elliston  <bje@au.ibm.com>
 463             Peter Bergner  <bergner@vnet.ibm.com>
 464
 465         * ppc-dis.c (ppc_opts): Add "ppca2" entry.
 466         * ppc-opc.c (powerpc_opcodes): Add eratilx, eratsx, eratsx.,
 467         eratre, wchkall, eratwe, ldawx., mdfcrx., mfdcr. mtdcrx., icswx,
 468         icswx., mtdcr., dci, wclrone, wclrall, wclr, erativax, tlbsrx.,
 469         ici mnemonics.
 470         (ERAT_T): New operand.
 471         (XWC_MASK): New mask.
 472         (XOPL2): New macro.
 473         (PPCA2): Define.
 474
 475 2009-09-18  Nick Clifton  <nickc@redhat.com>
 476
 477         * po/es.po: Updated Spanish translation.
 478         * po/vi.po: Updated Vietnamese translation.
 479
 480 2009-09-15  H.J. Lu  <hongjiu.lu@intel.com>
 481
 482         * i386-dis.c (OP_E_memory): Don't print '-' in Intel mode if
 483         disp == -disp.
 484
 485 2009-09-14  Nick Clifton  <nickc@redhat.com>
 486
 487         * po/nl.po: Updated Dutch translation.
 488
 489 2009-09-11  Nick Clifton  <nickc@redhat.com>
 490
 491         * po/opcodes.pot: Updated by the Translation project.
 492
 493 2009-09-11  Martin Thuresson  <martint@google.com>
 494
 495         Updated sources to compile cleanly with -Wc++-compat:
 496         * ld.h (enum endian_enum,enum symbolic_enum,enum dynamic_list_enum): Move to top level.
 497         * ldcref.c: Add casts.
 498         * ldctor.c: Add casts.
 499         * ldexp.c
 500         * ldexp.h (enum node_tree_enum,enum phase_enum): Move to top level.
 501         * ldlang.c: Add casts. (lang_insert_orphan): Use enum name instead of integer.
 502         * ldlang.h (enum statement_enum): Move to top level.
 503         * ldmain.c: Add casts.
 504         * ldwrite.c: Add casts.
 505         * lexsup.c: Add casts. (enum control_enum): Move to top level.
 506         * mri.c: Add casts. (mri_draw_tree): Use enum name instead of integer.
 507
 508 2009-09-10  Andreas Krebbel  <Andreas.Krebbel@de.ibm.com>
 509
 510         * s390-dis.c (print_insn_s390): Avoid 'long long'.
 511
 512 2009-09-10  Andreas Krebbel  <Andreas.Krebbel@de.ibm.com>
 513
 514         * s390-dis.c (s390_extract_operand): Remove the shift for pcrel operands.
 515         (print_insn_s390): Signextend and shift pcrel operands before printing.
 516
 517 2009-09-09  H.J. Lu  <hongjiu.lu@intel.com>
 518
 519         * i386-dis.c (vex_len_table): Change VEX_LEN_AE_R_X_M0 to
 520         VEX_LEN_AE_R_X_M_0 in comments.
 521
 522 2009-09-08  DJ Delorie  <dj@redhat.com>
 523
 524         * mep-opc.c: Regenerate.
 525
 526 2009-09-08  Andreas Schwab  <schwab@linux-m68k.org>
 527
 528         * z8kgen.c (struct op): Replace unused flavor with id.
 529         (opt): Remove extra xorb entry.
 530         (func): Use id field as fallback.
 531         (sub): Return new string, caller changed.
 532         (internal): Allocate end marker.  Assign unique id before sorting.
 533         (gas): Likewise.  Fix loop end condition.
 534         * z8k-opc.h: Regenerate.
 535
 536 2009-09-08  Alan Modra  <amodra@bigpond.net.au>
 537
 538         * ppc-opc.c (powerpc_macros <extrdi>): Allow n+b of 64.
 539
 540 2009-09-07  Alan Modra  <amodra@bigpond.net.au>
 541
 542         * z8kgen.c (func): Fix thinko last patch.
 543
 544 2009-09-07  Alan Modra  <amodra@bigpond.net.au>
 545
 546         * z8kgen.c (func): Stabilize qsort of identically named entries.
 547         * z8k-opc.h: Regenerate.
 548
 549 2009-09-07  Tristan Gingold  <gingold@adacore.com>
 550
 551         * po/opcodes.pot: Regenerate.
 552
 553 2009-09-07  Alan Modra  <amodra@bigpond.net.au>
 554
 555         * configure.in (BUILD_LIBS, BUILD_LIB_DEPS): Define and subst.
 556         * configure: Regenerate.
 557         * Makefile.am (LIBIBERTY, BUILD_LIBIBERTY, BUILD_LIBINTL): Delete.
 558         (BUILD_LIBS, BUILD_LIB_DEPS): Define.  Use..
 559         (i386-gen, ia64-gen, z8kgen): ..here.
 560         * Makefile.in: Regenerate.
 561
 562 2009-09-07  Tristan Gingold  <gingold@adacore.com>
 563
 564         * z8k-opc.h: Regenerate.
 565
 566 2009-09-05  Martin Thuresson  <martin@mtme.org>
 567
 568         * ia64-dis.c (print_insn_ia64): Update code to use renamed member.
 569         * m88k-dis.c (m88kdis): Rename variable class to in_class.
 570         * tic80-opc.c (tic80_symbol_to_value, tic80_value_to_symbol):
 571         Rename argument class to symbol_class.
 572
 573 2009-09-04  Jie Zhang  <jie.zhang@analog.com>
 574
 575         * bfin-dis.c (decode_pseudodbg_assert_0): Change according
 576         to the new encoding of DBGA, DBGAH, and DBGAL.
 577         (_print_insn_bfin): Likewise.
 578
 579 2009-09-03  Jie Zhang  <jie.zhang@analog.com>
 580
 581         * bfin-dis.c (_print_insn_bfin): Don't declare.
 582         (print_insn_bfin): Don't declare.
 583         (dregs_pair): Remove.
 584         (ignore_bits): Remove.
 585         (ccstat): Remove.
 586
 587 2009-09-03  Jie Zhang  <jie.zhang@analog.com>
 588
 589         * bfin-dis.c (IS_DREG): Define.
 590         (IS_PREG): Define.
 591         (IS_AREG): Define.
 592         (IS_GENREG): Define.
 593         (IS_DAGREG): Define.
 594         (IS_SYSREG): Define.
 595         (decode_REGMV_0): Check illegal register move instructions.
 596
 597 2009-09-03  Dave Korn  <dave.korn.cygwin@gmail.com>
 598
 599         * Makefile.am (BUILD_LIBINTL): New variable.
 600         (i386-gen$(EXEEXT_FOR_BUILD)): Use it.
 601         (ia64-gen$(EXEEXT_FOR_BUILD)): And here.
 602         (z8kgen$(EXEEXT_FOR_BUILD)): And here.
 603         * Makefile.in: Regenerate.
 604
 605 2009-09-01  DJ Delorie  <dj@redhat.com>
 606
 607         * mep-asm.c: Regenerate.
 608         * mep-desc.c: Regenerate.
 609         * mep-opc.c: Regenerate.
 610
 611 2009-09-01  Tristan Gingold  <gingold@adacore.com>
 612
 613         * makefile.vms: Ported to Itanium VMS.  Remove useless targets and
 614         dependencies.  Remove unused FORMAT variable.
 615         * configure.com: New file to create build.com DCL script for
 616         Itanium VMS or Alpha VMS.
 617
 618 2009-08-29  Martin Thuresson  <martin@mtme.org>
 619
 620         * cris-dis.c (bytes_to_skip): Update code to use new name.
 621         * i386-dis.c (putop): Update code to use new name.
 622         * i386-gen.c (process_i386_opcodes): Update code to use
 623         new name.
 624         * i386-opc.h (struct template): Rename struct template to
 625         insn_template. Update code accordingly.
 626         * i386-tbl.h (i386_optab): Update type to use new name.
 627         * ia64-dis.c (print_insn_ia64): Rename variable template
 628         to template_val.
 629         * tic30-dis.c (struct instruction, get_tic30_instruction):
 630         Update code to use new name.
 631         * tic54x-dis.c (has_lkaddr, get_insn_size)
 632         (print_parallel_instruction, print_insn_tic54x, tic54x_get_insn):
 633         Update code to use new name.
 634         * tic54x-opc.c (tic54x_unknown_opcode, tic54x_optab):
 635         Update type to new name.
 636         * z8kgen.c (internal, gas): Rename variable new to new_op.
 637
 638 2009-08-28  H.J. Lu  <hongjiu.lu@intel.com>
 639
 640         * Makefile.am (COMPILE_FOR_BUILD): Remove BUILD_CPPFLAGS.
 641         Replace BUILD_CFLAGS with CFLAGS_FOR_BUILD.
 642         (LINK_FOR_BUILD): Replace BUILD_CFLAGS/BUILD_LDFLAGS with
 643         CFLAGS_FOR_BUILD/LDFLAGS_FOR_BUILD.
 644         * Makefile.in: Regenerated.
 645
 646 2009-08-27  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
 647
 648         * Makefile.am (bfdlibdir, bfdincludedir): Move definition ...
 649         [INSTALL_LIBBFD]: ... here, ...
 650         [INSTALL_LIBBFD]: ... and empty overrides here.
 651         [!INSTALL_LIBBFD]: (rpath_bfdlibdir): New variable.
 652         [!INSTALL_LIBBFD] (libbfd_la_LDFLAGS): Use it.
 653         * Makefile.in: Regenerate.
 654         * configure: Regenerate.
 655
 656 2009-08-26  Philippe De Muyter  <phdm@macqel.be>
 657
 658         * m68k-dis.c (print_insn_arg): Add movecr register names for
 659         coldfire v4e families.
 660
 661 2009-08-25  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
 662
 663         * Makefile.am (SUBDIRS): Build '.' before 'po'.
 664         (COMPILE_FOR_BUILD, LINK_FOR_BUILD, BUILD_LIBIBERTY)
 665         (MOSTLYCLEANFILES, MAINTAINERCLEANFILES): New variables.
 666         (i386-gen$(EXEEXT_FOR_BUILD)): Renamed from i386-gen, rewrite
 667         using *BUILD variables, depend upon $(BUILD_LIBIBERTY).
 668         (i386-gen.o): New rule.
 669         ($(srcdir)/i386-init.h): Adjust.
 670         (i386-opc.lo): Depend on $(srcdir)/i386-tbl.h.
 671         (ia64-gen$(EXEEXT_FOR_BUILD)): Rename from ia64-gen, adjust likewise.
 672         (ia64-gen.o): New rule.
 673         (ia64_asmtab_deps): New variable.
 674         ($(srcdir)/ia64-asmtab.c): Use it; adjust likewise.
 675         (ia64-opc.lo): Depend on $(srcdir)/ia64-asmtab.c.
 676         (s390-mkopc$(EXEEXT_FOR_BUILD)): Rename from s390-mkopc, adjust
 677         likewise.
 678         (s390-opc.tab): Adjust.
 679         (z8kgen$(EXEEXT_FOR_BUILD), z8kgen.o, $(srcdir)/z8k-opc.h): New
 680         rules.
 681         (z8k-dis.lo): Depend on $(srcdir)/z8k-opc.h.
 682         * Makefile.in: Regenerate.
 683         * z8kgen.c (gas): Avoid '/*' in comment.
 684         * z8k-opc.h (func): Regenerate.
 685
 686 2009-08-24  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
 687
 688         * Makefile.am (TARGET_LIBOPCODES_CFILES): New variable, taken
 689         from $(CFILES), sorted, with dis-buf.c, dis-init.c, disassemble.c,
 690         i386-gen.c, ia64-opc-a.c, ia64-opc-b.c, ia64-opc-f.c, ia64-opc-i.c,
 691         ia64-opc-m.c, ia64-opc-d.c, ia64-gen.c, ia64-asmtab.c removed, and
 692         msp430-dis.c added.
 693         (LIBOPCODES_CFILES): New variable, adding to
 694         TARGET_LIBOPCODES_CFILES also non-target library sources.
 695         (CFILES): Factorize based on $(LIBOPCODES_CFILES), adding generator
 696         files.
 697         (ALL_MACHINES): Factorize based on $(TARGET_LIBOPCODES_CFILES).
 698         (EXTRA_libopcodes_la_SOURCES): Use $(LIBOPCODES_CFILES).
 699         * Makefile.in: Regenerate.
 700         * po/POTFILES.in: Regenerate.
 701
 702 2009-08-22  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
 703
 704         * Makefile.am (libopcodes_la_LDFLAGS): Initialize early.
 705         [INSTALL_LIBBFD] (bfdlib_LTLIBRARIES): Set only in this condition.
 706         [INSTALL_LIBBFD] (bfdinclude_DATA): New.
 707         [!INSTALL_LIBBFD] (noinst_LTLIBRARIES): New.
 708         [!INSTALL_LIBBFD] (libopcodes_la_LDFLAGS): Ensure libopcodes.la
 709         is built shared even if it is not to be installed.
 710         (install-bfdlibLTLIBRARIES,uninstall-bfdlibLTLIBRARIES)
 711         (install_libopcodes, uninstall_libopcodes): Remove.
 712         (AM_CPPFLAGS): Renamed from ...
 713         (INCLUDES): ... this.
 714         * Makefile.in: Regenerate.
 715
 716         * Makefile.am (AUTOMAKE_OPTIONS): Remove 1.9 and cygnus, add
 717         1.11, foreign, no-dist.
 718         (MKDEP, m32c_opc_h): Remove variables.
 719         (disassemble.lo): Rewrite using automake-style dependency
 720         tracking rules; only list the dependency upon the primary source
 721         file, but no included headers.
 722         (m32c-asm.lo, m32c-desc.lo, m32c-dis.lo, m32c-ibld.lo, m32c-opc.lo)
 723         (i386-gen.o, ia64-gen.o): Remove dependency statements.
 724         (EXTRA_libopcodes_la_SOURCES): New variable, list $(CFILES) to
 725         ensure all dependency fragments are included in the Makefile.
 726         (s390-opc.lo): Depend on s390-opc.tab.
 727         (DEP, DEP1, dep.sed, dep, dep-in, dep-am): Remove rules.
 728         (mkdep section): Remove.
 729         * Makefile.in: Regenerate.
 730         * po/POTFILES.in: Regenerate.
 731
 732         * Makefile.am (install-pdf, install-html): Remove.
 733         * Makefile.in: Regenerate.
 734
 735         * Makefile.in: Regenerate.
 736         * aclocal.m4: Likewise.
 737         * config.in: Likewise.
 738         * configure: Likewise.
 739
 740 2009-08-06  Michael Eager <eager@eagercon.com>
 741
 742         * Makefile.am: Add microblaze-opc.h to HFILES, microblaze-dis.c to
 743         CFILES, microblaze-dis.lo to ALL_MACHINES, targets.
 744         * Makefile.in: Regenerate.
 745         * configure.in: Add bfd_microblaze_arch target.
 746         * configure: Regenerate.
 747         * disassemble.c: Define ARCH_microblaze, return
 748         print_insn_microblaze().
 749         * microblaze-dis.c: New MicroBlaze disassembler.
 750         * microblaze-opc.h: New MicroBlaze opcode definitions.
 751         * microblaze-opcm.h: New MicroBlaze opcode types.
 752
 753 2009-07-25  H.J. Lu  <hongjiu.lu@intel.com>
 754
 755         * configure.in: Handle bfd_l1om_arch.
 756         * disassemble.c (disassembler): Likewise.
 757
 758         * configure: Regenerated.
 759
 760         * i386-dis.c (print_insn): Handle bfd_mach_l1om and
 761         bfd_mach_l1om_intel_syntax.  Use 8 bytes per line for Intel L1OM.
 762
 763         * i386-gen.c (cpu_flag_init): Set CPU_UNKNOWN_FLAGS to ~CpuL1OM.
 764         Add CPU_L1OM_FLAGS.
 765         (cpu_flags): Add CpuL1OM.
 766         (set_bitfield): Take an argument to set the value field.
 767         (process_i386_cpu_flag): Support ~CpuXXX and ~(CpuXXX|CpuYYY).
 768         (process_i386_opcode_modifier): Updated.
 769         (process_i386_operand_type): Likewise.
 770         * i386-init.h: Regenerated.
 771         * i386-tbl.h: Likewise.
 772
 773         * i386-opc.h (CpuL1OM): New.
 774         (CpuXsave): Updated.
 775         (i386_cpu_flags): Add cpul1om.
 776
 777 2009-07-24  Jan Beulich  <jbeulich@novell.com>
 778
 779         * i386-dis.c (fgrps): Correct annotation for feni/fdisi. Add
 780         frstpm.
 781         * i386-gen.c (cpu_flag_init): Add FP enabling flags where needed.
 782         (cpu_flags): Add Cpu8087, Cpu287, Cpu387, Cpu687, and CpuFISTTP.
 783         (set_bitfield): Expand CpuFP to Cpu8087|Cpu287|Cpu387.
 784         * i386-opc.h (Cpu8087, Cpu287, Cpu387, Cpu687, CpuFISTTP):
 785         Define.
 786         (union i386_cpu_flags): Add cpu8087, cpu287, cpu387, cpu687,
 787         and cpufisttp.
 788         * i386-opc.tbl: Qualify floating point instructions by their
 789         respective CpuXXX flag. Fix fucom{,p,pp}, fprem1, fsin, fcos,
 790         and fsincos to be avilable only on 387. Fix fstsw ax to be
 791         available only on 287+. Add f{,n}eni, f{,n}disi, f{,n}setpm,
 792         and frstpm.
 793         * i386-init.h, i386-tbl.h: Regenerate.
 794
 795 2009-07-20  Nick Clifton  <nickc@redhat.com>
 796
 797         PR 10288
 798         * arm-dis.c (arm_opcodes): Catch non-zero bits 8-11 in register
 799         offset or indexed based addressing mode 3.
 800
 801 2009-07-14  Nick Clifton  <nickc@redhat.com>
 802
 803         PR 10288
 804         * arm-dis.c (arm_opcodes): Catch illegal Addressing Mode 1
 805         patterns.
 806         (arm_decode_shift): Catch illegal register based shifts.
 807         (print_insn_arm): Properly handle negative register r0
 808         post-indexed addressing.
 809
 810 2009-07-10  Doug Kwan  <dougkwan@google.com>
 811
 812         * arm-disc.c (print_insn_coprocessor, print_insn_arm):  Print only
 813         lower 32 bits of long types to make hexadecimal output consistent
 814         on both 32-bit and 64-bit hosts.
 815
 816 2009-07-10  Alan Modra  <amodra@bigpond.net.au>
 817
 818         * fr30-desc.c, * fr30-desc.h, * fr30-opc.c, * fr30-opc.h,
 819         * frv-desc.c, * frv-desc.h, * frv-opc.c, * frv-opc.h,
 820         * ip2k-desc.c, * ip2k-desc.h, * ip2k-opc.c, * ip2k-opc.h,
 821         * iq2000-desc.c, * iq2000-desc.h, * iq2000-opc.c, * iq2000-opc.h,
 822         * lm32-desc.c, * lm32-desc.h, * lm32-opc.c, * lm32-opc.h,
 823         * lm32-opinst.c, * m32c-desc.c, * m32c-desc.h, * m32c-opc.c,
 824         * m32c-opc.h, * m32r-desc.c, * m32r-desc.h, * m32r-opc.c,
 825         * m32r-opc.h, * m32r-opinst.c, * mt-desc.c, * mt-desc.h,
 826         * mt-opc.c, * mt-opc.h, * openrisc-desc.c, * openrisc-desc.h,
 827         * openrisc-opc.c, * openrisc-opc.h, * xc16x-desc.c, * xc16x-desc.h,
 828         * xc16x-opc.c, * xc16x-opc.h, * xstormy16-desc.c, * xstormy16-desc.h,
 829         * xstormy16-opc.c, * xstormy16-opc.h: Regenerate.
 830
 831 2009-07-07  Chung-Lin Tang  <cltang@pllab.cs.nthu.edu.tw>
 832
 833         * arm-dis.c (coprocessor_opcodes): Fix mask for waddbhus.
 834
 835 2009-07-07  Nick Clifton  <nickc@redhat.com>
 836
 837         PR 10288
 838         * arm-dis.c (arm_opcodes): Be more strict about decoding scaled
 839         addressing modes.
 840
 841 2009-07-06  DJ Delorie  <dj@redhat.com>
 842
 843         * mep-desc.c: Regenerate.
 844         * mep-desc.h: Regenerate.
 845         * mep-opc.c: Regenerate.
 846         * mep-opc.h: Regenerate.
 847
 848 2009-07-06  Dwarakanath Rajagopal  <dwarak.rajagopal@amd.com>
 849
 850         * i386-opc.h (CpuFMA4): Add CpuFMA4.
 851         (i386_cpu_flags): New.
 852         * i386-gen.c: Add CPU_FMA4_FLAGS.
 853         * i386-opc.tbl: Add FMA4 instructions.
 854         * i386-tbl.h: Regenerate.
 855         * i386-init.h: Regenerate.
 856         * i386-dis.c (OP_VEX_FMA): New. Handle FMA4.
 857         (OP_XMM_VexW): Ditto.
 858         (OP_EX_VexW): Ditto.
 859         (VEXI4_Fixup): Ditto.
 860         (VexI4, VexFMA, Vex128FMA, EXVexW, EXdVexW, XMVexW): New Macros.
 861         (PREFIX_VEX_3A5C, PREFIX_VEX_3A5D, PREFIX_VEX_3A5E): New.
 862         (PREFIX_VEX_3A5F, PREFIX_VEX_3A60): New.
 863         (PREFIX_VEX_3A68, PREFIX_VEX_3A69, PREFIX_VEX_3A6A): New.
 864         (PREFIX_VEX_3A6B, PREFIX_VEX_3A6C, PREFIX_VEX_3A6D): New.
 865         (PREFIX_VEX_3A6E, PREFIX_VEX_3A6F, PREFIX_VEX_3A7A): New.
 866         (PREFIX_VEX_3A7B, PREFIX_VEX_3A7C, PREFIX_VEX_3A7D): New.
 867         (PREFIX_VEX_3A7E, PREFIX_VEX_3A7F): New.
 868         (VEX_LEN_3A6A_P_2,VEX_LEN_3A6B_P_2, VEX_LEN_3A6E_P_2): New.
 869         (VEX_LEN_3A6F_P_2,VEX_LEN_3A7A_P_2, VEX_LEN_3A7B_P_2): New.
 870         (VEX_LEN_3A7E_P_2,VEX_LEN_3A7F_P_2): New.
 871         (get_vex_imm8): New. handle FMA4.
 872         (OP_EX_VexReg): Ditto.
 873
 874 2009-06-30  Nick Clifton  <nickc@redhat.com>
 875
 876         PR 10288
 877         * arm-dis.c (coprocessor): Print the LDC and STC versions of the
 878         LFM and SFM instructions as comments,.
 879         Improve consistency of formatting for instructions displayed as
 880         comments and decimal values displayed with their hexadecimal
 881         equivalents.
 882         Formatting tidy ups.
 883
 884 2009-06-29  Nick Clifton  <nickc@redhat.com>
 885
 886         PR 10288
 887         * arm-dis.c (enum opcode_sentinels): New:  Used to mark the
 888         boundary between variaant and generic coprocessor instuctions.
 889         (coprocessor): Use it.
 890         Fix architecture version of MCRR and MRRC instructions.
 891         (arm_opcdes): Fix patterns for STRB and STRH instructions.
 892         (print_insn_coprocessor): Check architecture and extension masks.
 893         Print a hexadecimal version of any decimal constant that is
 894         outside of the range of -16 to +32.
 895         (print_arm_address): Add a return value of the offset used in the
 896         adress, if it is worth printing a hexadecimal version of it.
 897         (print_insn_neon): Print a hexadecimal version of any decimal
 898         constant that is outside of the range of -16 to +32.
 899         (print_insn_arm): Likewise.
 900         (print_insn_thumb16): Likewise.
 901         (print_insn_thumb32): Likewise.
 902
 903         PR 10297
 904         * arm-dis.c (UNDEFINED_INSTRUCTION): New macro for a description
 905         of an undefined instruction.
 906         (arm_opcodes): Use it.
 907         (thumb_opcod): Use it.
 908         (thumb32_opc): Use it.
 909
 910 2009-06-23  DJ Delorie  <dj@redhat.com>
 911
 912         * mep-desc.c: Regenerate.
 913         * mep-desc.h: Regenerate.
 914         * mep-dis.c: Regenerate.
 915         * mep-ibld.c: Regenerate.
 916         * mep-opc.c: Regenerate.
 917
 918         * mep-asm.c: Regenerate.
 919         * mep-opc.c: Regenerate.
 920         * mep-opc.h: Regenerate.
 921
 922 2009-06-22  Nick Clifton  <nickc@redhat.com>
 923
 924         * po/fi.po: Updated Finish translation.
 925
 926 2009-06-22  Alan Modra  <amodra@bigpond.net.au>
 927
 928         * m32c-asm.c: Regenerate.
 929
 930 2009-06-22  Alan Modra  <amodra@bigpond.net.au>
 931
 932         * score-dis.c (print_insn_score48, print_insn_score32): Move default
 933         case label to proper lexical block.
 934         * score7-dis.c (print_insn_score32): Likewise.
 935
 936 2009-06-19  Martin Schwidefsky  <sschwidefsky@de.ibm.com>
 937
 938         * s390-opc.c (INSTR_RR_0R_OPT, INSTR_RX_0RRD_OPT, MASK_RR_0R_OPT,
 939         MASK_RX_0RRD_OPT): New instruction formats with optional arguments.
 940         * s390-opc.txt (nopr, nop): Use new instruction format.
 941
 942 2009-06-18  Nick Clifton  <nickc@redhat.com>
 943
 944         PR 10288
 945         * arm-dis.c (print_insn_coprocessor): Check that a user specified
 946         ARM architecture supports the matched instruction.
 947         (print_insn_arm): Likewise.
 948         (select_arm_features): New function.  Fills in the fields of an
 949         arm_feature_set structure based on a given arm machine number.
 950         (print_insn): Initialise an arm_feature_set structure.
 951
 952 2009-06-16  Maciej W. Rozycki  <macro@linux-mips.org>
 953
 954         * vax-dis.c (is_function_entry): Return success for synthetic
 955         symbols too.
 956         (is_plt_tail): New function.
 957         (print_insn_vax): Decode PLT entry offset longword.
 958
 959 2009-06-15  Nick Clifton  <nickc@redhat.com>
 960
 961         PR 10186
 962         * arm-dis.c (thumb32_opcodes): Fix binary value of SEV.W
 963         instruction.
 964
 965         PR 10173
 966         * cr16-dis.c (print_arg): Avoid printing the 0x prefix twice.
 967
 968 2009-06-15  Nick Clifton  <nickc@redhat.com>
 969
 970         PR 10263
 971         * arm-dis.c (print_insn): Ignore is_data if the user has requested
 972         the disassembly of data as well as instructions.
 973
 974 2009-06-11  Doug Evans  <dje@sebabeach.org>
 975
 976         * cgen.sh: Handle multiple simultaneous runs for parallel makes.
 977
 978 2009-06-11  Anthony Green  <green@moxielogic.com>
 979
 980         * moxie-opc.c (moxie_form1_opc_info): Remove branch instructions.
 981         (moxie_form3_opc_info): Add branch instructions.
 982         * moxie-dis.c (print_insn_moxie): Disassemble MOXIE_F3_PCREL
 983         encoded instructions.
 984
 985 2009-06-06  Anthony Green  <green@moxielogic.com>
 986
 987         * moxie-opc.c: Recode some MOXIE_F1_4 opcodes as MOXIE_F1_M.
 988         * moxie-dis.c (print_insn_moxie): Handle MOXIE_F1_M case.
 989
 990 2009-06-04  Alan Modra  <amodra@bigpond.net.au>
 991
 992         * dep-in.sed: Don't use \n in replacement part of s command.
 993         * Makefile.am (DEP1): LC_ALL for uniq.
 994         * Makefile.in: Regenerate.
 995
 996 2009-06-02  Nick Clifton  <nickc@redhat.com>
 997
 998         * po/nl.po: Updated Dutch translation.
 999
1000 2009-06-02  Tristan Gingold  <gingold@adacore.com>
1001
1002         * ia64-gen.c (parse_resource_users, print_dependency_table,
1003         add_dis_table_ent, finish_distable, insert_bit_table_ent,
1004         add_dis_entry, compact_distree, gen_dis_table, completer_entries_eq,
1005         get_prefix_len, compute_completer_bits, insert_opcode_dependencies,
1006         insert_completer_entry, print_completer_entry, print_completer_table,
1007         opcodes_eq, add_opcode_entry, shrink): Use ISO C syntax for functions.
1008
1009 2009-05-28  DJ Delorie  <dj@redhat.com>
1010
1011         * mep-asm.c: Regenerate.
1012         * mep-desc.c: Regenerate.
1013
1014 2009-05-26  DJ Delorie  <dj@redhat.com>
1015
1016         * mep-asm.c: Regenerate.
1017         * mep-desc.c: Regenerate.
1018         * mep-desc.h: Regenerate.
1019         * mep-dis.c: Regenerate.
1020         * mep-ibld.c: Regenerate.
1021         * mep-opc.c: Regenerate.
1022         * mep-opc.h: Regenerate.
1023
1024 2009-05-26  Nick Clifton  <nickc@redhat.com>
1025
1026         * po/id.po: Updated Indonesian translation.
1027         * po/opcodes.pot: Updated template file.
1028
1029 2009-05-26  Alan Modra  <amodra@bigpond.net.au>
1030
1031         * dep-in.sed: Don't modify .o to .lo here.  Output one filename
1032         per line with all lines having continuation backslash.  Prefix
1033         first line with "A", following lines with "B".
1034         * Makefile.am (DEP): Don't use dep.sed here.
1035         (DEP1): Run $MKDEP on single files, modify .o to .lo here.  Use
1036         dep.sed here on dependencies, sort and uniq.
1037         * Makefile.in: Regenerate.
1038
1039 2009-05-25  Tristan Gingold  <gingold@adacore.com>
1040
1041         * makefile.vms (OPT): New variable.
1042         (CFLAGS): Update compilation flags.
1043
1044 2009-05-22  DJ Delorie  <dj@redhat.com>
1045
1046         * mep-asm.c: Regenerate.
1047         * mep-desc.c: Regenerate.
1048         * mep-desc.h: Regenerate.
1049         * mep-dis.c: Regenerate.
1050         * mep-ibld.c: Regenerate.
1051         * mep-opc.c: Regenerate.
1052         * mep-opc.h: Regenerate.
1053
1054 2009-05-22  Dwarakanath Rajagopal  <dwarak.rajagopal@amd.com>
1055
1056         * i386-opc.h (Cpusse5): Delete.
1057         (i386_cpu_flags): Delete.
1058         * i386-gen.c: Remove CpuSSE5, Drex, Drexv and Drexc.
1059         * i386-opc.tbl: Remove SSE5 instructions.
1060         * i386-tbl.h: Regenerate.
1061         * i386-init.h: Regenerate.
1062         * i386-dis.c (OP_E_memeory, OP_E_extended): Remove drex handling.
1063         (print_drex_arg): Delete.
1064         (OP_DREX4): Delete.
1065         (OP_DREX3): Delete.
1066         (OP_DREX_ICMP): Delete.
1067         (OP_DREX_FCMP): Delete.
1068         (DREX_*): Delete.
1069         (THREE_BYTE_0F24, THREE_BYTE_0F25, THREE_BYTE_0f7B): Delete.
1070
1071 2009-05-22  Alan Modra  <amodra@bigpond.net.au>
1072
1073         * Makefile.am: Run "make dep-am".
1074         * Makefile.in: Regenerate.
1075         * po/POTFILES.in: Regenerate.
1076
1077 2009-05-19  DJ Delorie  <dj@redhat.com>
1078
1079         * mep-asm.c: Regenerate.
1080         * mep-opc.c: Regenerate.
1081
1082 2009-04-30  DJ Delorie  <dj@redhat.com>
1083
1084         * mep-asm.c: Regenerate.
1085         * mep-desc.c: Regenerate.
1086         * mep-desc.h: Regenerate.
1087         * mep-dis.c: Regenerate.
1088         * mep-ibld.c: Regenerate.
1089         * mep-opc.c: Regenerate.
1090         * mep-opc.h: Regenerate.
1091
1092 2009-04-17  DJ Delorie  <dj@redhat.com
1093
1094         * mep-desc.c: Regenerate.
1095         * mep-ibld.c: Regenerate.
1096         * mep-opc.c: Regenerate.
1097         * mep-opc.h: Regenerate.
1098
1099 2009-04-15  Anthony Green  <green@moxielogic.com>
1100
1101         * moxie-opc.c, moxie-dis.c: Created.
1102         * Makefile.am: Build the moxie source files.
1103         * configure.in: Add moxie support.
1104         * Makefile.in, configure: Rebuilt.
1105         * disassemble.c (disassembler): Add moxie support.
1106         (ARCH_moxie): Define.
1107
1108 2009-04-15  Jan Beulich  <jbeulich@novell.com>
1109
1110         * i386-opc.tbl (protb, protw, protd, protq): Set opcode
1111         extension to None.
1112         (pshab, pshaw, pshad, pshaq): Likewise.
1113         * i386-tbl.h: Re-generate.
1114
1115 2009-04-08  DJ Delorie  <dj@redhat.com
1116
1117         * mep-asm.c: Regenerate.
1118         * mep-desc.c: Regenerate.
1119         * mep-desc.h: Regenerate.
1120         * mep-dis.c: Regenerate.
1121         * mep-ibld.c: Regenerate.
1122         * mep-opc.c: Regenerate.
1123         * mep-opc.h: Regenerate.
1124
1125 2009-04-07  Peter Bergner  <bergner@vnet.ibm.com>
1126
1127         * ppc-opc.c (powerpc_opcodes) <"tlbilxlpid", "tlbilxpid", "tlbilxva",
1128         "tlbilx">: Use secondary opcode "18" as per the ISA 2.06 documentation.
1129         Reorder entries so the extended mnemonics are listed before tlbilx.
1130
1131 2009-04-02  Peter Bergner  <bergner@vnet.ibm.com>
1132
1133         * ppc-dis.c (powerpc_init_dialect): Do not choose a default dialect
1134         due to -many/-Many.
1135         (print_insn_powerpc): Make sure we only deprecate instructions using
1136         the original dialect and not a modified dialect due to -Many handling.
1137         Move the handling of the condition register and default operands to
1138         the end of the if/else if/else chain.
1139         * ppc-opc.c (powerpc_opcodes): Reorder the opcode table so that
1140         instructions from newer processors are listed before older ones.
1141         <"icblce", "sync", "eieio", "tlbld">: Deprecate for processors
1142         that have instructions with conflicting opcodes.
1143
1144 2009-04-01  Peter Bergner  <bergner@vnet.ibm.com>
1145
1146         * ppc-opc.c (powerpc_opcodes) <"dcbzl">: Merge the POWER4 and
1147         E500MC entries.
1148
1149 2009-04-01  Christophe Lyon  <christophe.lyon@st.com>
1150
1151         * arm-dis.c (print_insn): Print BE8 opcodes in little endianness.
1152
1153 2009-03-30  Joseph Myers  <joseph@codesourcery.com>
1154
1155         * arm-dis.c (print_insn): Also check section matches in backwards
1156         search for mapping symbol.
1157
1158 2009-03-26  H.J. Lu  <hongjiu.lu@intel.com>
1159
1160         * i386-dis.c (get_valid_dis386): Abort on unhandled table.
1161
1162 2009-03-18  Alan Modra  <amodra@bigpond.net.au>
1163
1164         * cgen-opc.c: Include alloca-conf.h rather than alloca.h.
1165         * Makefile.am: Run "make dep-am".
1166         * Makefile.in: Regenerate.
1167         * openrisc-opc.c: Regenerate.
1168
1169 2009-03-10  Nick Clifton  <nickc@redhat.com>
1170
1171         * po/id.po: Updated Indonesian translation.
1172
1173 2009-03-10  Alan Modra  <amodra@bigpond.net.au>
1174
1175         * ppc-dis.c: Include "opintl.h".
1176         (struct ppc_mopt, ppc_opts): New.
1177         (ppc_parse_cpu): New function.
1178         (powerpc_init_dialect): Use it.
1179         (print_ppc_disassembler_options): Dump options from ppc_opts.
1180         Internationalize message.
1181
1182 2009-03-06  Nick Clifton  <nickc@redhat.com>
1183
1184         * po/es.po: Updated Spanish translation.
1185
1186 2009-03-04  Alan Modra  <amodra@bigpond.net.au>
1187
1188         PR 6768
1189         * configure.in: Test for ld --as-needed support.  Link shared
1190         libopcodes against libm.
1191         * configure: Regenerate.
1192
1193 2009-03-03  Peter Bergner  <bergner@vnet.ibm.com>
1194
1195         * ppc-opc.c (powerpc_opcodes): Reorder the opcode table so that
1196         instructions from newer processors are listed before older ones.
1197
1198 2009-03-03  Alan Modra  <amodra@bigpond.net.au>
1199
1200         * Makefile.am: Run "make dep-am".
1201         (HFILES): Move lm32-desc.h and lm32-opc.h from..
1202         (CFILES): ..here.
1203         * Makefile.in: Regenerate.
1204
1205 2009-03-02  Qinwei  <qinwei@sunnorth.com.cn>
1206
1207         * score7-dis.c: New file.
1208         * Makefile.am: Add dependencies for score7-dis.c.
1209         * Makefile.in: Regenerate.
1210         * configure.in: Add score7-dis to score files.
1211         * configure: Regenerate.
1212         * score-dis.c: Add support for score7 architecture.
1213         * score-opc.h: Likewise.
1214
1215 2009-03-01  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
1216
1217         * configure: Regenerate.
1218
1219 2009-02-27  H.J. Lu  <hongjiu.lu@intel.com>
1220
1221         * i386-dis.c (OP_EX): Call OP_E_memory instead of OP_E.
1222
1223 2009-02-26  Peter Bergner  <bergner@vnet.ibm.com>
1224
1225         * ppc-dis.c (powerpc_init_dialect): Extend -Mpower7 to disassemble
1226         the power7 and the isel instructions.
1227         * ppc-opc.c (insert_xc6, extract_xc6): New static functions.
1228         (insert_dm, extract_dm): Likewise.
1229         (XB6): Update comment to include XX2 form.
1230         (WC, XC6, SHW, DMEX, UIM, XX2, XX3RC, XX4, XX2_MASK, XX2UIM_MASK,
1231         XX2BF_MASK, XX3BF_MASK, XX3SHW_MASK, XX4_MASK, XWC_MASK, POWER7): New.
1232         (RemoveXX3DM): Delete.
1233         (powerpc_opcodes): <"lfdp", "lfdpx", "mcrxr", "mftb", "mffgpr",
1234         "mftgpr">: Deprecate for POWER7.
1235         <"fres", "fres.", "frsqrtes", "frsqrtes.", "fre", "fre.", "frsqrte",
1236         "frsqrte.">: Deprecate the three operand form and enable the two
1237         operand form for POWER7 and later.
1238         <"wait">: Extend to accept optional parameter.  Enable for POWER7.
1239         <"waitsrv", "waitimpl">: Add extended opcodes.
1240         <"ldbrx", "stdbrx">: Enable for POWER7.
1241         <"cdtbcd", "cbcdtd", "addg6s">: Add POWER6 opcodes.
1242         <"bpermd", "dcbtstt", "dcbtt", "dcffix.", "dcffix", "divde.", "divde",
1243         "divdeo.", "divdeo", "divdeu.", "divdeu", "divdeuo.", "divdeuo",
1244         "divwe.", "divwe", "divweo.", "divweo", "divweu.", "divweu", "divweuo.",
1245         "divweuo", "fcfids.", "fcfids", "fcfidu.", "fcfidu", "fcfidus.",
1246         "fcfidus", "fctidu.", "fctidu", "fctiduz.", "fctiduz", "fctiwu.",
1247         "fctiwu", "fctiwuz.", "fctiwuz", "ftdiv", "ftsqrt", "lbarx", "lfiwzx",
1248         "lharx", "popcntd", "popcntw", "stbcx.", "sthcx.">: Add POWER7 opcodes.
1249         <"lxsdux", "lxsdx", "lxvdsx", "lxvw4ux", "lxvw4x", "stxsdux", "stxsdx",
1250         "stxvw4ux", "stxvw4x", "xsabsdp", "xsadddp", "xscmpodp", "xscmpudp",
1251         "xscpsgndp", "xscvdpsp", "xscvdpsxds", "xscvdpsxws", "xscvdpuxds",
1252         "xscvdpuxws", "xscvspdp", "xscvsxddp", "xscvuxddp", "xsdivdp",
1253         "xsmaddadp", "xsmaddmdp", "xsmaxdp", "xsmindp", "xsmsubadp",
1254         "xsmsubmdp", "xsmuldp", "xsnabsdp", "xsnegdp", "xsnmaddadp",
1255         "xsnmaddmdp", "xsnmsubadp", "xsnmsubmdp", "xsrdpi", "xsrdpic",
1256         "xsrdpim", "xsrdpip", "xsrdpiz", "xsredp", "xsrsqrtedp", "xssqrtdp",
1257         "xssubdp", "xstdivdp", "xstsqrtdp", "xvabsdp", "xvabssp", "xvadddp",
1258         "xvaddsp", "xvcmpeqdp.", "xvcmpeqdp", "xvcmpeqsp.", "xvcmpeqsp",
1259         "xvcmpgedp.", "xvcmpgedp", "xvcmpgesp.", "xvcmpgesp", "xvcmpgtdp.",
1260         "xvcmpgtdp", "xvcmpgtsp.", "xvcmpgtsp", "xvcpsgnsp", "xvcvdpsp",
1261         "xvcvdpsxds", "xvcvdpsxws", "xvcvdpuxds", "xvcvdpuxws", "xvcvspdp",
1262         "xvcvspsxds", "xvcvspsxws", "xvcvspuxds", "xvcvspuxws", "xvcvsxddp",
1263         "xvcvsxdsp", "xvcvsxwdp", "xvcvsxwsp", "xvcvuxddp", "xvcvuxdsp",
1264         "xvcvuxwdp", "xvcvuxwsp", "xvdivdp", "xvdivsp", "xvmaddadp",
1265         "xvmaddasp", "xvmaddmdp", "xvmaddmsp", "xvmaxdp", "xvmaxsp",
1266         "xvmindp", "xvminsp", "xvmovsp", "xvmsubadp", "xvmsubasp", "xvmsubmdp",
1267         "xvmsubmsp", "xvmuldp", "xvmulsp", "xvnabsdp", "xvnabssp", "xvnegdp",
1268         "xvnegsp", "xvnmaddadp", "xvnmaddasp", "xvnmaddmdp", "xvnmaddmsp",
1269         "xvnmsubadp", "xvnmsubasp", "xvnmsubmdp", "xvnmsubmsp", "xvrdpi",
1270         "xvrdpic", "xvrdpim", "xvrdpip", "xvrdpiz", "xvredp", "xvresp",
1271         "xvrspi", "xvrspic", "xvrspim", "xvrspip", "xvrspiz", "xvrsqrtedp",
1272         "xvrsqrtesp", "xvsqrtdp", "xvsqrtsp", "xvsubdp", "xvsubsp", "xvtdivdp",
1273         "xvtdivsp", "xvtsqrtdp", "xvtsqrtsp", "xxland", "xxlandc", "xxlnor",
1274         "xxlor", "xxlxor", "xxmrghw", "xxmrglw", "xxsel", "xxsldwi", "xxspltd",
1275         "xxspltw", "xxswapd">: Add VSX opcodes.
1276
1277 2009-02-23  H.J. Lu  <hongjiu.lu@intel.com>
1278
1279         * i386-gen.c (operand_type_init): Remove OPERAND_TYPE_VEX_IMM4.
1280         (operand_types): Remove Vex_Imm4.
1281
1282         * i386-opc.h (Vex_Imm4): Removed.
1283         (OTMax): Updated.
1284         (i386_operand_type): Remove vex_imm4.
1285
1286         * i386-opc.tbl: Remove Vex_Imm4 comments.
1287         * i386-init.h: Regenerated.
1288         * i386-tbl.h: Likewise.
1289
1290 2009-02-23  Richard Earnshaw  <rearnsha@arm.com>
1291
1292         * arm-dis.c (neon_opcodes): Correct bit-mask and patterns for
1293         vq{r}shr{u}n.s64 insnstructions.
1294
1295 2009-02-19  Peter Bergner  <bergner@vnet.ibm.com>
1296
1297         * ppc-opc.c (powerpc_opcodes) <"lfdepx", "stfdepx">: Fix the first
1298         operand to be a float point register (FRT/FRS).
1299
1300 2009-02-18  Adam Nemet  <anemet@caviumnetworks.com>
1301
1302         * mips-opc.c (mips_builtin_opcodes): Move the Octeon-specific
1303         dmfc2 and dmtc2 before the architecture-level variants.
1304
1305 2009-02-18  Pierre Muller  <muller@ics.u-strasbg.fr>
1306
1307         * fr30-opc.c: Regenerate.
1308         * frv-opc.c: Regenerate.
1309         * ip2k-opc.c: Regenerate.
1310         * iq2000-opc.c: Regenerate.
1311         * lm32-opc.c: Regenerate.
1312         * m32c-opc.c: Regenerate.
1313         * m32r-opc.c: Regenerate.
1314         * mep-opc.c: Regenerate.
1315         * mt-opc.c: Regenerate.
1316         * xc16x-opc.c: Regenerate.
1317         * xstormy16-opc.c: Regenerate.
1318         * tic54x-dis.c (print_instruction): Avoid compiler warning on
1319         sprintf call.
1320
1321 2009-02-12  Nathan Sidwell  <nathan@codesourcery.com>
1322
1323         * m68k-opc.c (m68k_opcodes): Add stldsr instruction.
1324
1325 2009-02-05  Peter Bergner  <bergner@vnet.ibm.com>
1326
1327         * ppc-opc.c: Update copyright year.
1328         (powerpc_opcodes) <"dcbt", "dcbtst">: Deprecate the Embedded operand
1329         ordering for POWER4 and later and use the correct Server ordering.
1330
1331 2009-02-04  H.J. Lu  <hongjiu.lu@intel.com>
1332
1333         AVX Programming Reference (January, 2009)
1334         * i386-dis.c (PREFIX_VEX_3A44): New.
1335         (VEX_LEN_3A44_P_2): Likewise.
1336         (PREFIX_VEX_3A48): Updated.
1337         (VEX_LEN_3A4C_P_2): Likewise.
1338         (prefix_table): Add PREFIX_VEX_3A44.
1339         (vex_table): Likewise.
1340         (vex_len_table): Add VEX_LEN_3A44_P_2.
1341
1342         * i386-opc.tbl: Add PCLMUL + AVX instructions.
1343         * i386-tbl.h: Regenerated.
1344
1345 2009-02-03  Sandip Matte  <sandip@rmicorp.com>
1346
1347         * mips-dis.c (mips_cp0_names_xlr, mips_cp0sel_names_xlr): Define.
1348         (mips_arch_choices): Add XLR entry.
1349         * mips-opc.c (XLR): Define.
1350         (mips_builtin_opcodes): Add XLR instructions.
1351
1352 2009-02-03  Carlos O'Donell  <carlos@codesourcery.com>
1353
1354         * Makefile.am: Add install-pdf target.
1355         * po/Make-in: Add install-pdf target.
1356         * Makefile.in: Regenerate.
1357
1358 2009-02-02  DJ Delorie  <dj@redhat.com>
1359
1360         * mep-asm.c: Regenerate.
1361         * mep-desc.c: Regenerate.
1362         * mep-desc.h: Regenerate.
1363         * mep-dis.c: Regenerate.
1364         * mep-ibld.c: Regenerate.
1365         * mep-opc.c: Regenerate.
1366         * mep-opc.h: Regenerate.
1367
1368 2009-01-29  Mark Mitchell  <mark@codesourcery.com>
1369
1370         * arm-dis.c (thumb32_opcodes): Correct decoding for qadd, qdadd,
1371         qsub, and qdsub.
1372
1373 2009-01-28  Chao-ying Fu  <fu@mips.com>
1374
1375         * mips-opc.c (suxc1): Add the flag of FP_D.
1376
1377 2009-01-20  Alan Modra  <amodra@bigpond.net.au>
1378
1379         * fr30-asm.c, fr30-dis.c, fr30-ibld.c, frv-asm.c, frv-dis.c,
1380         * frv-ibld.c, ip2k-asm.c, ip2k-dis.c, ip2k-ibld.c,
1381         * iq2000-asm.c, iq2000-dis.c, iq2000-ibld.c, m32c-asm.c,
1382         * m32c-dis.c, m32c-ibld.c, m32r-asm.c, m32r-dis.c,
1383         * m32r-ibld.c, mep-asm.c, mep-dis.c, mep-ibld.c, mt-asm.c,
1384         * mt-dis.c, mt-ibld.c, openrisc-asm.c, openrisc-dis.c,
1385         * openrisc-ibld.c, xc16x-asm.c, xc16x-dis.c, xc16x-ibld.c,
1386         * xstormy16-asm.c, xstormy16-dis.c, xstormy16-ibld.c: Regenerate.
1387
1388 2009-01-16  Alan Modra  <amodra@bigpond.net.au>
1389
1390         * configure.in (commonbfdlib): Delete.
1391         (SHARED_LIBADD): Add pic libiberty if such is available.
1392         * configure: Regenerate.
1393         * po/POTFILES.in: Regenerate.
1394
1395 2009-01-14  Peter Bergner  <bergner@vnet.ibm.com>
1396
1397         * ppc-dis.c (print_insn_powerpc): Skip insn if it is deprecated.
1398         * ppc-opc.c (powerpc_opcodes) <mtfsf, mtfsf.>: Deprecate the two
1399         operand form and enable the four operand form for POWER6 and later.
1400         <mtfsfi, mtfsfi.>: Deprecate the two operand form and enable the
1401         three operand form for POWER6 and later.
1402
1403 2009-01-14  Mike Frysinger  <vapier@gentoo.org>
1404
1405         * bfin-dis.c (OUTS): Use "%s" as format string.
1406
1407 2009-01-13  H.J. Lu  <hongjiu.lu@intel.com>
1408
1409         * i386-gen.c (cpu_flag_init): Remove a white space.
1410         (operand_type_init): Likewise.
1411
1412 2009-01-12  H.J. Lu  <hongjiu.lu@intel.com>
1413
1414         * i386-opc.tbl: Add NoAVX to movnti, lfence and mfence.
1415         * i386-tbl.h: Regenerated.
1416
1417 2009-01-12  H.J. Lu  <hongjiu.lu@intel.com>
1418
1419         * i386-dis.c (dis386): Use EbS on addB, orB, adcB, sbbB, andB,
1420         subB, xorB and cmpB.  Use EvS on addS, orS, adcS, sbbS, andS,
1421         subS, xorS and cmpS.
1422
1423 2009-01-10  H.J. Lu  <hongjiu.lu@intel.com>
1424
1425         * i386-gen.c (cpu_flag_init): Replace CpuP4 and CpuK6 with
1426         CpuClflush and CpuSYSCALL, respectively. Remove CpuK8.  Add
1427         CPU_COREI7_FLAGS, CPU_CLFLUSH_FLAGS and CPU_SYSCALL_FLAGS.
1428         (cpu_flags): Remove CpuP4, CpuK6 and CpuK8.  Add CpuClflush
1429         and CpuSYSCALL.
1430         (lineno): Removed.
1431         (set_bitfield): Take an argument, lineno.  Don't report lineno
1432         on error if it is -1.
1433         (process_i386_cpu_flag): Take an argument, lineno.
1434         (process_i386_opcode_modifier): Likewise.
1435         (process_i386_operand_type): Likewise.
1436         (output_i386_opcode): Likewise.
1437         (opcode_hash_entry): Add lineno.
1438         (process_i386_opcodes): Updated.
1439         (process_i386_registers): Likewise.
1440         (process_i386_initializers): Likewise.
1441
1442         * i386-opc.h (CpuP4): Removed.
1443         (CpuK6): Likewise.
1444         (CpuK8): Likewise.
1445         (CpuClflush): New.
1446         (CpuSYSCALL): Likewise.
1447         (CpuMMX): Updated.
1448         (i386_cpu_flags): Remove cpup4, cpuk6 and cpuk8.  Add
1449         cpuclflush and cpusyscall.
1450
1451         * i386-opc.tbl: Update movnti, clflush, lfence, mfence, pause,
1452         syscall and sysret.
1453         * i386-init.h: Regenerated.
1454         * i386-tbl.h: Likewise.
1455
1456 2009-01-09  H.J. Lu  <hongjiu.lu@intel.com>
1457
1458         * i386-gen.c (cpu_flag_init): Add CpuRdtscp to CPU_K8_FLAGS
1459         and CPU_AMDFAM10_FLAGS.  Add CPU_RDTSCP_FLAGS.
1460         (cpu_flags): Add CpuRdtscp.
1461         (set_bitfield): Remove CpuSledgehammer check.
1462
1463         * i386-opc.h (CpuRdtscp): New.
1464         (CpuLM): Updated.
1465         (i386_cpu_flags): Add cpurdtscp.
1466
1467         * i386-opc.tbl: Replace CpuSledgehammer with CpuRdtscp.
1468         * i386-init.h: Regenerated.
1469         * i386-tbl.h: Likewise.
1470
1471 2009-01-09  Peter Bergner  <bergner@vnet.ibm.com>
1472
1473         * ppc-opc.c (PPCNONE): Define.
1474         (NOPOWER4): Delete.
1475         (powerpc_opcodes): Initialize the new "deprecated" field.
1476
1477 2009-01-06  H.J. Lu  <hongjiu.lu@intel.com>
1478
1479         AVX Programming Reference (December, 2008)
1480         * i386-dis.c (VEX_LEN_2B_M_0): Removed.
1481         (VEX_LEN_E7_P_2_M_0): Likewise.
1482         (VEX_LEN_2C_P_1): Updated.
1483         (VEX_LEN_E8_P_2): Likewise.
1484         (vex_len_table): Remove VEX_LEN_2B_M_0 and VEX_LEN_E7_P_2_M_0.
1485         (mod_table): Likewise.
1486
1487         * i386-opc.tbl: Add 256bit vmovntdq, vmovntpd and vmovntps.
1488         * i386-tbl.h: Regenerated.
1489
1490 2009-01-05  H.J. Lu  <hongjiu.lu@intel.com>
1491
1492         * i386-gen.c (process_copyright): Update for 2009.
1493
1494         * i386-init.h: Regenerated.
1495         * i386-tbl.h: Likewise.
1496
1497 2009-01-05  H.J. Lu  <hongjiu.lu@intel.com>
1498
1499         AVX Programming Reference (December, 2008)
1500         * i386-dis.c (OP_VEX_FMA): Removed.
1501         (OP_EX_VexW): Likewise.
1502         (OP_EX_VexImmW): Likewise.
1503         (OP_XMM_VexW): Likewise.
1504         (VEXI4_Fixup): Likewise.
1505         (VPERMIL2_Fixup): Likewise.
1506         (VexI4): Likewise.
1507         (VexFMA): Likewise.
1508         (Vex128FMA): Likewise.
1509         (EXVexW): Likewise.
1510         (EXdVexW): Likewise.
1511         (EXqVexW): Likewise.
1512         (EXVexImmW): Likewise.
1513         (XMVexW): Likewise.
1514         (VPERMIL2): Likewise.
1515         (PREFIX_VEX_3A48...PREFIX_VEX_3A4A): Likewise.
1516         (PREFIX_VEX_3A5C...PREFIX_VEX_3A5F): Likewise.
1517         (PREFIX_VEX_3A68...PREFIX_VEX_3A6F): Likewise.
1518         (PREFIX_VEX_3A78...PREFIX_VEX_3A7F): Likewise.
1519         (VEX_LEN_3A6A_P_2...VEX_LEN_3A6F_P_2): Likewise.
1520         (VEX_LEN_3A7A_P_2...VEX_LEN_3A7F_P_2): Likewise.
1521         (get_vex_imm8): Likewise.
1522         (OP_EX_VexReg): Likewise.
1523         vpermil2_op): Likewise.
1524         (EXVexWdq): New.
1525         (vex_w_dq_mode): Likewise.
1526         (PREFIX_VEX_3896...PREFIX_VEX_389F): Likewise.
1527         (PREFIX_VEX_38A6...PREFIX_VEX_38AF): Likewise.
1528         (PREFIX_VEX_38B6...PREFIX_VEX_38BF): Likewise.
1529         (es_reg): Updated.
1530         (PREFIX_VEX_38DB): Likewise.
1531         (PREFIX_VEX_3A4A): Likewise.
1532         (PREFIX_VEX_3A60): Likewise.
1533         (PREFIX_VEX_3ADF): Likewise.
1534         (VEX_LEN_3ADF_P_2): Likewise.
1535         (prefix_table): Remove PREFIX_VEX_3A48...PREFIX_VEX_3A4A,
1536         PREFIX_VEX_3A5C...PREFIX_VEX_3A5F,
1537         PREFIX_VEX_3A68...PREFIX_VEX_3A6F and
1538         PREFIX_VEX_3A78...PREFIX_VEX_3A7F.  Add
1539         PREFIX_VEX_3896...PREFIX_VEX_389F,
1540         PREFIX_VEX_38A6...PREFIX_VEX_38AF and
1541         PREFIX_VEX_38B6...PREFIX_VEX_38BF.
1542         (vex_table): Likewise.
1543         (vex_len_table): Remove VEX_LEN_3A6A_P_2...VEX_LEN_3A6F_P_2
1544         and VEX_LEN_3A7A_P_2...VEX_LEN_3A7F_P_2.
1545         (putop): Support "%XW".
1546         (intel_operand_size): Handle vex_w_dq_mode.
1547
1548         * i386-opc.h (VexNDS): Add a comment for VEX NDS and VEX DDS.
1549
1550         * i386-opc.tbl: Remove vpermil2pd/vpermil2ps and old FMA
1551         instructions.  Add new FMA instructions.
1552         * i386-tbl.h: Regenerated.
1553
1554 2009-01-02  Matthias Klose  <doko@ubuntu.com>
1555
1556         * or32-opc.c (or32_print_register, or32_print_immediate,
1557         disassemble_insn): Don't rely on undefined sprintf behaviour.
1558
1559 For older changes see ChangeLog-2008
1560 \f
1561 Local Variables:
1562 mode: change-log
1563 left-margin: 8
1564 fill-column: 74
1565 version-control: never
1566 End: