opcodes/ChangeLog

   1 start-sanitize-5900
   2 Thu Jun 26 16:20:27 1997  Jeffrey A Law  (law@cygnus.com)
   3
   4         * mips-opc.c (mips_builtin_opcodes): Add "pinteh", "pexeh" and
   5         "pexew" as synonyms for "pintoh", "pexoh", "pexow".
   6
   7 end-sanitize-5900
   8 Wed Jun 25 15:25:57 1997  Felix Lee  <flee@cirdan.cygnus.com>
   9
  10         * ppc-opc.c (extract_nsi): make unsigned expression signed before
  11         negating it.
  12         (UNUSED): remove one level of parens, so MSVC doesn't choke on
  13         nesting depth when all the macros are expanded.
  14
  15 Tue Jun 17 17:02:17 1997  Ian Lance Taylor  <ian@cygnus.com>
  16
  17         * sparc-opc.c: The fcmp v9a instructions take an integer register
  18         as a destination, not a floating point register.  From Christian
  19         Kuehnke <Christian.Kuehnke@arbi.Informatik.Uni-Oldenburg.DE>.
  20
  21 Mon Jun 16 14:13:18 1997  Ian Lance Taylor  <ian@cygnus.com>
  22
  23         * m68k-dis.c (print_insn_arg): Print case 7.2 using %pc@()
  24         syntax.  From Roman Hodek
  25         <rnhodek@faui22c.informatik.uni-erlangen.de>.
  26
  27         * i386-dis.c (twobyte_has_modrm): Fix pand.
  28
  29 Mon Jun 16 14:08:38 1997  Michael Taylor  <mbt@mit.edu>
  30
  31         * i386-dis.c (dis386_twobyte): Fix pand and pandn.
  32
  33 Tue Jun 10 11:26:47 1997  H.J. Lu  <hjl@gnu.ai.mit.edu>
  34
  35         * arm-dis.c: Add prototypes for arm_decode_shift and
  36         print_insn_arm.
  37
  38 Mon Jun  2 11:39:04 1997  Gavin Koch  <gavin@cygnus.com>
  39
  40         * mips-opc.c: Add r3900 insns.
  41
  42 Tue May 27 15:55:44 1997  Ian Lance Taylor  <ian@cygnus.com>
  43
  44         * sh-dis.c (print_insn_shx): Change relmask to bfd_vma.  Don't
  45         print delay slot instructions on the same line.  When using a PC
  46         relative load, add a comment with the value being loaded if it can
  47         be obtained.
  48
  49 Tue May 27 11:02:08 1997  Alan Modra  <alan@spri.levels.unisa.edu.au>
  50
  51         * i386-dis.c (dis386[], dis386_twobyte[]): change pushl/popl
  52         to pushS/popS for segment regs and byte constant so that
  53         pushw/popw printed when in 16 bit data mode.
  54
  55         * i386-dis.c (dis386[]): change cwtl, cltd to cWtS, cStd to
  56         print cbtw, cwtd in 16 bit data mode.
  57         * i386-dis.c (putop): extra case W to support above.
  58
  59         * i386-dis.c (print_insn_x86): print addr32 prefix when given
  60         address size prefix in 16 bit address mode.
  61
  62 Fri May 23 16:47:23 1997  Ian Lance Taylor  <ian@cygnus.com>
  63
  64         * sh-dis.c: Reindent.  Rename local variable fprintf to
  65         fprintf_fn.
  66
  67 Thu May 22 14:06:02 1997  Doug Evans  <dje@canuck.cygnus.com>
  68
  69         * m32r-opc.c (m32r_cgen_insn_table, cmpui): Undo patch of May 2.
  70
  71 Tue May 20 11:26:27 1997  Gavin Koch  <gavin@cygnus.com>
  72
  73         * mips-opc.c (mips_builtin_opcodes): Moved INSN_ISA field into new
  74           field membership.
  75         * mips16-opc.c (mip16_opcodes): same.
  76
  77 Mon May 12 15:10:53 1997  Jim Wilson  <wilson@cygnus.com>
  78
  79         * m68k-opc.c (moveb): Change $d to %d.
  80
  81 Mon May  5 14:28:41 1997  Ian Lance Taylor  <ian@cygnus.com>
  82
  83         * i386-dis.c: (dis386_twobyte): Add MMX instructions.
  84         (twobyte_has_modrm): Likewise.
  85         (grps): Likewise.
  86         (OP_MMX, OP_EM, OP_MS): New static functions.
  87
  88         * i386-dis.c: Revert patch of April 4.  The output now matches
  89         what gcc generates.
  90
  91 Fri May  2 12:48:37 1997  Doug Evans  <dje@canuck.cygnus.com>
  92
  93         * m32r-opc.c (m32r_cgen_insn_table, cmpui): Use $uimm16 instead
  94         of $simm16.
  95
  96 Thu May  1 15:34:15 1997  Doug Evans  <dje@canuck.cygnus.com>
  97
  98         * m32r-opc.h (CGEN_ARCH): Renamed from CGEN_CPU.
  99
 100 Tue Apr 15 12:40:08 1997  Ian Lance Taylor  <ian@cygnus.com>
 101
 102         * Makefile.in (install): Depend upon installdirs.
 103         (installdirs): New target.
 104
 105 Mon Apr 14 12:13:51 1997  Ian Lance Taylor  <ian@cygnus.com>
 106
 107         From Thomas Graichen <graichen@rzpd.de>:
 108         * configure.in: Use ${CONFIG_SHELL} when running $ac_config_sub.
 109         * configure: Rebuild.
 110
 111 Sun Apr 13 17:50:41 1997  Doug Evans  <dje@canuck.cygnus.com>
 112
 113         * cgen-*.c, m32r-*.c: #include sysdep.h instead of config.h.
 114         Delete string{,s}.h support.
 115
 116 Thu Apr 10 14:44:56 1997  Doug Evans  <dje@canuck.cygnus.com>
 117
 118         * cgen-asm.c (cgen_parse_operand_fn): New global.
 119         (cgen_parse_{{,un}signed_integer,address}): Update call to
 120         cgen_parse_operand_fn.
 121         (cgen_init_parse_operand): New function.
 122         * m32r-asm.c (parse_insn_normal): cgen_init_parse_operand renamed
 123         from cgen_asm_init_parse.
 124         (m32r_cgen_assemble_insn): New operand `errmsg'.
 125         Delete call to as_bad, return error message to caller.
 126         (m32r_cgen_asm_hash_keywords): #if 0 out.
 127
 128 Wed Apr  9 12:05:25 1997  Andreas Schwab  <schwab@issan.informatik.uni-dortmund.de>
 129
 130         * m68k-dis.c (print_insn_arg) [case 'd']: Print as address register,
 131         not data register.
 132         [case 'J']: Fix typo in register name.
 133
 134 Mon Apr  7 16:48:22 1997  Ian Lance Taylor  <ian@cygnus.com>
 135
 136         * configure.in: Substitute SHLIB_LIBS.
 137         * configure: Rebuild.
 138         * Makefile.in (SHLIB_LIBS): New variable.
 139         ($(SHLIB)): Use $(SHLIB_LIBS).
 140
 141 Mon Apr  7 11:45:44 1997  Doug Evans  <dje@canuck.cygnus.com>
 142
 143         * cgen-dis.c (build_dis_hash_table): Fix xmalloc size computation.
 144
 145         * cgen-opc.c (hash_keyword_name): Improve algorithm.
 146
 147         * disassemble.c (disassembler): Handle m32r.
 148
 149 Fri Apr  4 12:29:38 1997  Doug Evans  <dje@canuck.cygnus.com>
 150
 151         * m32r-asm.c, m32r-dis.c, m32r-opc.c, m32r-opc.h: New files.
 152         * cgen-asm.c, cgen-dis.c, cgen-opc.c: New files.
 153         * Makefile.in (CFILES): Add them.
 154         (ALL_MACHINES): Add them.
 155         (dependencies): Regenerate.
 156         * configure.in (cgen_files): New variable.
 157         (bfd_m32r_arch): Add entry.
 158         * configure: Regenerate.
 159
 160 Fri Apr  4 14:04:16 1997  Ian Lance Taylor  <ian@cygnus.com>
 161
 162         * configure.in: Correct file names for bfd_mn10[23]00_arch.
 163         * configure: Rebuild.
 164
 165         * Makefile.in: Rebuild dependencies.
 166
 167         * d10v-dis.c: Include "ansidecl.h" before "opcode/d10v.h".
 168
 169         * i386-dis.c (float_reg): Swap fsubrp and fsubp.  Swap fdivrp and
 170         fdivp.
 171
 172 Thu Apr  3 13:22:45 1997  Ian Lance Taylor  <ian@cygnus.com>
 173
 174         * Branched binutils 2.8.
 175
 176 Wed Apr  2 12:23:53 1997  Ian Lance Taylor  <ian@cygnus.com>
 177
 178         * m10200-dis.c: Rename from mn10200-dis.c.
 179         * m10200-opc.c: Rename from mn10200-opc.c.
 180         * m10300-dis.c: Rename from mn10300-dis.c
 181         * m10300-opc.c: Rename from mn10300-opc.c.
 182         * Makefile.in: Update accordingly.
 183
 184         * mips16-opc.c: Add mul and dmul macros.
 185
 186 Tue Apr  1 16:27:45 1997  Klaus Kaempf  <kkaempf@progis.de>
 187
 188         * makefile.vms: Update CFLAGS, add clean target.
 189
 190 Fri Mar 28 12:10:09 1997  Ian Lance Taylor  <ian@cygnus.com>
 191
 192         * mips-opc.c: Add "wait".  From Ralf Baechle
 193         <ralf@gnu.ai.mit.edu>.
 194
 195         * configure.in: Add stdlib.h to AC_CHECK_HEADERS list.
 196         * configure, config.in: Rebuild.
 197         * sysdep.h: Include <stdlib.h> if it exists.
 198         * sparc-dis.c: Include <stdio.h> and "sysdep.h".  Don't include
 199         <string.h>.
 200         * Makefile.in: Rebuild dependencies.
 201
 202 Thu Mar 27 14:24:43 1997  Ian Lance Taylor  <ian@cygnus.com>
 203
 204         * ppc-opc.c: Add PPC 403 instructions and extended opcodes.  From
 205         Andrew Bray <andy@madhouse.demon.co.uk>.
 206
 207         * mips-opc.c: Add cast when setting mips_opcodes.
 208
 209 start-sanitize-v850
 210 Tue Mar 25 23:04:00 1997  Stu Grossman  (grossman@critters.cygnus.com)
 211
 212         * v850-dis.c (disassemble):  Fix sign extension problem.
 213         * v850-opc.c (extract_d*):  Fix sign extension problems to make
 214         disassembly calculate branch offsets correctly.
 215
 216 end-sanitize-v850
 217 Mon Mar 24 13:22:13 1997  Ian Lance Taylor  <ian@cygnus.com>
 218
 219         * sh-opc.h: Add bf/s and bt/s as synonyms for bf.s and bt.s.
 220
 221         * mips-opc.c: Add dctr and dctw.
 222
 223 start-sanitize-d30v
 224 Sun Mar 23 18:08:10 1997  Martin M. Hunt  <hunt@pizza.cygnus.com>
 225
 226         * d30v-dis.c (print_insn): Change the way signed constants
 227         are displayed.
 228 end-sanitize-d30v
 229 Fri Mar 21 14:37:52 1997  Ian Lance Taylor  <ian@cygnus.com>
 230
 231         * Makefile.in (BFD_H): New variable.
 232         (HFILES): New variable.
 233         (CFILES): Add all C files.
 234         (.dep, .dep1, dep.sed, dep, dep-in): New targets.
 235         Delete old dependencies, and build new ones.
 236         * dep-in.sed: New file.
 237
 238 Thu Mar 20 19:03:30 1997  Philippe De Muyter  <phdm@info.ucl.ac.be>
 239
 240         * m68k-opc.c (m68k_opcode_aliases): Added blo and blo{s,b,w,l}.
 241
 242 start-sanitize-coldfire
 243 Wed Mar 19 06:53:58 1997  J.T. Conklin  <jtc@rtl.cygnus.com>
 244
 245         * m68k-opc.c (m68k_opcodes): Provide coldfire division module
 246         instructions.
 247
 248 end-sanitize-coldfire
 249 Tue Mar 18 14:17:03 1997  Jeffrey A Law  (law@cygnus.com)
 250
 251         * mn10200-opc.c: Change "trap" to "syscall".
 252         * mn10300-opc.c: Add new "syscall" instruction.
 253
 254 Mon Mar 17 08:48:03 1997  J.T. Conklin  <jtc@beauty.cygnus.com>
 255
 256         * m68k-opc.c (m68k_opcodes): Provide correct entries for mulsl and
 257         mulul insns on the coldfire.
 258
 259 Sat Mar 15 17:13:05 1997  Ian Lance Taylor  <ian@cygnus.com>
 260
 261         * arm-dis.c (print_insn_arm): Don't print instruction bytes.
 262         (print_insn_big_arm): Set bytes_per_chunk and display_endian.
 263         (print_insn_little_arm): Likewise.
 264
 265 Fri Mar 14 15:08:59 1997  Ian Lance Taylor  <ian@cygnus.com>
 266
 267         Based on patches from H.J. Lu <hjl@lucon.org>:
 268         * i386-dis.c (fetch_data): Add prototype.
 269         * m68k-dis.c (fetch_data): Add prototype.
 270         (dummy_print_address): Add prototype.  Make static.
 271         * ppc-opc.c (valid_bo): Add prototype.
 272         * sparc-dis.c (build_hash_table): Add prototype.
 273         (is_delayed_branch, compute_arch_mask): Add prototypes.
 274         (print_insn_sparc): Make several local variables const.
 275         (compare_opcodes): Change arguments to const PTR.  Add prototype.
 276         * sparc-opc.c (arg): Change name field to be const.
 277         (lookup_name, lookup_value): Add prototypes.  Change table and
 278         name parameters to be const.
 279         (sparc_encode_asi): Change name parameter to be const.
 280         (sparc_encode_membar, sparc_encode_prefetch): Likewise.
 281         (sparc_encode_sparclet_cpreg): Likewise.
 282         (sparc_decode_asi): Change return type to be const.
 283         (sparc_decode_membar, sparc_decode_prefetch): Likewise.
 284         (sparc_decode_sparclet_cpreg): Likewise.
 285
 286 Fri Mar  7 10:51:49 1997  Ian Lance Taylor  <ian@cygnus.com>
 287
 288         * Makefile.in ($(SHLINK)): Just use ln -s, not ln -sf, since
 289         Solaris doesn't like the combined options, and the -f is
 290         unnecessary.
 291         (stamp-tshlink, install): Likewise.
 292
 293 Thu Mar  6 16:51:11 1997  Jeffrey A Law  (law@cygnus.com)
 294
 295         * mn10300-opc.c (IMM16_PCREL, SD8N_PCREL, D16_SHIFT): Mark these
 296         as relaxable.
 297
 298 Tue Mar  4 06:10:36 1997  J.T. Conklin  <jtc@cygnus.com>
 299
 300         * m68k-opc.c (m68k_opcodes): Fix last change for the mc68010.
 301
 302 Mon Mar  3 07:45:20 1997  J.T. Conklin  <jtc@cygnus.com>
 303
 304         * m68k-opc.c (m68k_opcodes): Added entries for the tst insns on
 305         the mc68000.
 306
 307 Thu Feb 27 14:04:32 1997  Philippe De Muyter  <phdm@info.ucl.ac.be>
 308
 309         * m68k-opc.c (m68k_opcodes): Added swbegl pseudo-instruction.
 310
 311 start-sanitize-tic80
 312 Thu Feb 27 11:36:41 1997  Michael Meissner  <meissner@cygnus.com>
 313
 314         * tic80-dis.c (print_insn_tic80): Set info->bytes_per_line to 8.
 315
 316 Wed Feb 26 15:34:48 1997  Michael Meissner  <meissner@cygnus.com>
 317
 318         * tic80-opc.c (tic80_predefined_symbols): Define r25 properly.
 319
 320 end-sanitize-tic80
 321 Wed Feb 26 13:38:30 1997  Andreas Schwab  <schwab@issan.informatik.uni-dortmund.de>
 322
 323         * m68k-dis.c (NEXTSINGLE, NEXTDOUBLE, NEXTEXTEND): Use
 324         floatformat_to_double to make portable.
 325         (print_insn_arg): Use NEXTEXTEND macro when extracting extended
 326         precision float.
 327
 328 Mon Feb 24 19:26:12 1997  Dawn Perchik  <dawn@cygnus.com>
 329
 330         * mips-opc.c: Initialize mips_opcodes to mips_builtin_opcodes,
 331         and bfd_mips_num_opcodes to bfd_mips_num_builtin_opcodes.
 332
 333 Mon Feb 24 15:19:01 1997  Martin M. Hunt  <hunt@pizza.cygnus.com>
 334
 335         * d10v-dis.c, d10v-opc.c: Change pre_defined_registers to
 336         d10v_predefined_registers and reg_name_cnt to d10v_reg_name_cnt.
 337
 338 start-sanitize-tic80
 339 Mon Feb 24 14:33:26 1997  Fred Fish  <fnf@cygnus.com>
 340
 341         * tic80-opc.c (LSI_SCALED): Renamed from this ...
 342         (OFF_SL_BR_SCALED): ... to this, and added the flag
 343         TIC80_OPERAND_BASEREL to the flags word.
 344         (tic80_opcodes): Replace all occurances of LSI_SCALED with
 345         OFF_SL_BR_SCALED.
 346
 347 end-sanitize-tic80
 348 Sat Feb 22 21:25:00 1997  Dawn Perchik  <dawn@cygnus.com>
 349
 350         * mips-opc.c: Add macros for cop0, cop1 cop2 and cop3.
 351         Change mips_opcodes from const array to a pointer,
 352         and change bfd_mips_num_opcodes from const int to int,
 353         so that we can increase the size of the mips opcodes table
 354         dynamically.
 355
 356 start-sanitize-tic80
 357 Sat Feb 22 21:03:47 1997  Fred Fish  <fnf@cygnus.com>
 358
 359         * tic80-opc.c (tic80_predefined_symbols): Revert change to
 360         store BITNUM values in the table in one's complement form
 361         to match behavior when assembler is given a raw numeric
 362         value for a BITNUM operand.
 363         * tic80-dis.c (print_operand_bitnum): Ditto.
 364
 365 end-sanitize-tic80
 366 start-sanitize-d30v
 367 Fri Feb 21 16:31:18 1997  Martin M. Hunt  <hunt@pizza.cygnus.com>
 368
 369         * d30v-opc.c: Removed references to FLAG_X.
 370
 371 end-sanitize-d30v
 372 Wed Feb 19 14:51:20 1997  Ian Lance Taylor  <ian@cygnus.com>
 373
 374         * Makefile.in: Add dependencies on ../bfd/bfd.h as required.
 375
 376 start-sanitize-d30v
 377 Tue Feb 18 17:43:43 1997  Martin M. Hunt  <hunt@pizza.cygnus.com>
 378
 379         * Makefile.in: Added d30v object files.
 380         * configure: (bfd_d30v_arch) Rebuilt.
 381         * configure.in: (bfd_d30v_arch) Added new case.
 382         * d30v-dis.c: New file.
 383         * d30v-opc.c: New file.
 384         * disassemble.c (disassembler) Add entry for d30v.
 385
 386 end-sanitize-d30v
 387 start-sanitize-tic80
 388 Tue Feb 18 16:32:08 1997  Fred Fish  <fnf@cygnus.com>
 389
 390         * tic80-opc.c (tic80_predefined_symbols): Add symbolic
 391         representations for the floating point BITNUM values.
 392
 393 Fri Feb 14 12:14:05 1997  Fred Fish  <fnf@cygnus.com>
 394
 395         * tic80-opc.c (tic80_predefined_symbols): Store BITNUM values
 396         in the table in one's complement form, as they appear in the
 397         actual instruction.
 398         (tic80_symbol_to_value): Use macros to access predefined
 399         symbol fields.
 400         (tic80_value_to_symbol): Ditto.
 401         (tic80_next_predefined_symbol): New function.
 402         * tic80-dis.c (print_operand_bitnum): Remove code that did
 403         one's complement for BITNUM values.
 404
 405 end-sanitize-tic80
 406 start-sanitize-r5900
 407 Fri Feb 14 13:56:51 1997  Gavin Koch  <gavin@cygnus.com>
 408
 409         * mips-opc.c: bug fix, can't mark insns INSN_5900 and INSN_ISA4
 410
 411 end-sanitize-r5900
 412 Thu Feb 13 21:56:51 1997  Klaus Kaempf  <kkaempf@progis.de>
 413
 414         * makefile.vms: Remove 8 bit characters.  Update to latest
 415         gcc release.
 416
 417 Thu Feb 13 20:41:22 1997  Philippe De Muyter  <phdm@info.ucl.ac.be>
 418
 419         * m68k-opc.c (m68k_opcodes): Add swbeg pseudo-instruction.
 420
 421 Thu Feb 13 16:30:02 1997  Jeffrey A Law  (law@cygnus.com)
 422
 423         * mn10200-opc.c (IMM16_PCREL): This is a signed operand.
 424         (IMM24_PCREL): Likewise.
 425
 426 Thu Feb 13 13:28:43 1997  Ian Lance Taylor  <ian@cygnus.com>
 427
 428         * mips-dis.c (print_mips16_insn_arg): Use memaddr - 2 as the base
 429         address for an extended PC relative instruction that is not a
 430         branch.
 431
 432 Wed Feb 12 12:27:40 1997  Andreas Schwab  <schwab@issan.informatik.uni-dortmund.de>
 433
 434         * m68k-dis.c (print_insn_m68k): Set bytes_per_chunk and
 435         bytes_per_line.
 436
 437 start-sanitize-tic80
 438 Tue Feb 11 16:36:31 1997  Fred Fish  <fnf@cygnus.com>
 439
 440         * tic80-opc.c (tic80_operands): Fix typo '+' -> '|'.
 441         (tic80_opcodes): Sort entries so that long immediate forms
 442         come after short immediate forms, making it easier for
 443         assembler to select the right one for a given operand.
 444
 445 end-sanitize-tic80
 446 Tue Feb 11 15:26:47 1997  Ian Lance Taylor  <ian@cygnus.com>
 447
 448         * mips-dis.c (_print_insn_mips): Set bytes_per_chunk and
 449         display_endian.
 450         (print_insn_mips16): Likewise.
 451
 452 start-sanitize-r5900
 453 Fri Feb  7 11:12:44 1997  Gavin Koch  <gavin@cygnus.com>
 454
 455         * mips-opc.c: add r5900.
 456
 457 end-sanitize-r5900
 458 start-sanitize-tic80
 459 Mon Feb 10 10:12:41 1997  Fred Fish  <fnf@cygnus.com>
 460
 461         * tic80-opc.c (tic80_symbol_to_value): Changed to accept
 462         a symbol class that restricts translation to just that
 463         class (general register, condition code, etc).
 464
 465 Thu Feb  6 17:34:09 1997  Fred Fish  <fnf@cygnus.com>
 466
 467         * tic80-opc.c (tic80_operands): Add REG_0_E, REG_22_E,
 468         and REG_DEST_E for register operands that have to be
 469         an even numbered register.  Add REG_FPA for operands that
 470         are one of the floating point accumulator registers.
 471         Add TIC80_OPERAND_MASK to flags for ENDMASK operand.
 472         (tic80_opcodes): Change entries that need even numbered
 473         register operands to use the new operand table entries.
 474         Add "or" entries that are identical to "or.tt" entries.
 475
 476 end-sanitize-tic80
 477 Wed Feb  5 11:12:44 1997  Ian Lance Taylor  <ian@cygnus.com>
 478
 479         * mips16-opc.c: Add new cases of exit instruction for
 480         disassembler.
 481         * mips-dis.c (print_mips16_insn_arg): Display floating point
 482         registers in operands of exit instruction.  Print `$' before
 483         register names in operands of entry and exit instructions.
 484
 485 start-sanitize-tic80
 486 Thu Jan 30 14:09:03 1997  Fred Fish  <fnf@cygnus.com>
 487
 488         * tic80-opc.c (tic80_predefined_symbols): Table of name/value
 489         pairs for all predefined symbols recognized by the assembler.
 490         Also used by the disassembling routines.
 491         (tic80_symbol_to_value): New function.
 492         (tic80_value_to_symbol): New function.
 493         * tic80-dis.c (print_operand_control_register,
 494         print_operand_condition_code, print_operand_bitnum):
 495         Remove private tables and use tic80_value_to_symbol function.
 496
 497 end-sanitize-tic80
 498 Thu Jan 30 11:30:45 1997  Martin M. Hunt  <hunt@pizza.cygnus.com>
 499
 500         * d10v-dis.c (print_operand): Change address printing
 501         to correctly handle PC wrapping.  Fixes PR11490.
 502
 503 Wed Jan 29 09:39:17 1997  Jeffrey A Law  (law@cygnus.com)
 504
 505         * mn10200-opc.c (mn10200_operands): Make 8 and 16 bit pc-relative
 506         branches relaxable.
 507
 508 Tue Jan 28 15:57:34 1997  Ian Lance Taylor  <ian@cygnus.com>
 509
 510         * mips-dis.c (print_insn_mips16): Set insn_info information.
 511         (print_mips16_insn_arg): Likewise.
 512
 513         * mips-dis.c (print_insn_mips16): Better handling of an extend
 514         opcode followed by an instruction which can not be extended.
 515
 516 Fri Jan 24 12:08:21 1997  J.T. Conklin  <jtc@cygnus.com>
 517
 518         * m68k-opc.c (m68k_opcodes): Changed operand specifier for the
 519         coldfire moveb instruction to not allow an address register as
 520         destination.  Although the documentation does not indicate that
 521         this is invalid, experiments uncovered unexpected behavior.
 522         Added a comment explaining the situation.  Thanks to Andreas
 523         Schwab for pointing this out to me.
 524
 525 start-sanitize-tic80
 526 Wed Jan 22 20:13:51 1997  Fred Fish  <fnf@cygnus.com>
 527
 528         * tic80-opc.c (tic80_opcodes): Expand comment to note that the
 529         entries are presorted so that entries with the same mnemonic are
 530         adjacent to each other in the table.  Sort the entries for each
 531         instruction so that this is true.
 532
 533 end-sanitize-tic80
 534 Mon Jan 20 12:48:57 1997  Andreas Schwab  <schwab@issan.informatik.uni-dortmund.de>
 535
 536         * m68k-dis.c: Include <libiberty.h>.
 537         (print_insn_m68k): Sort the opcode table on the most significant
 538         nibble of the opcode.
 539
 540 start-sanitize-tic80
 541 Sat Jan 18 15:15:05 1997  Fred Fish  <fnf@cygnus.com>
 542
 543         * tic80-dis.c (tic80_opcodes): Add "wrcr", "vmpy", "vrnd",
 544         "vsub", "vst", "xnor", and "xor" instructions.
 545         (V_a1): Renamed from V_a, msb of accumulator reg number.
 546         (V_a0): Add macro, lsb of accumulator reg number.
 547
 548 Fri Jan 17 18:24:31 1997  Fred Fish  <fnf@cygnus.com>
 549
 550         * tic80-dis.c (print_insn_tic80): Broke excessively long
 551         function up into several smaller ones and arranged for
 552         the instruction printing function to be callable recursively
 553         to print vector instructions that have both a load and a
 554         math instruction packed into a single opcode.
 555         * tic80-opc.c (tic80_opcodes): Expand comment for vld opcode
 556         to explain why it comes after the other vector opcodes.
 557
 558 end-sanitize-tic80
 559 Fri Jan 17 16:19:15 1997  J.T. Conklin  <jtc@beauty.cygnus.com>
 560
 561         * m68k-opc.c (m68k_opcodes): add b, w, or l specifier to coldfire
 562         move insns to handle immediate operands.
 563
 564 Thu Jan 17 16:19:00 1997  Andreas Schwab  <schwab@issan.informatik.uni-dortmund.de>
 565
 566         * m68k-opc.c (m68k_opcodes): Delete duplicate entry for "cmpil".
 567         fix operand mask in the "moveml" entries for the coldfire.
 568
 569 start-sanitize-tic80
 570 Thu Jan 16 20:54:40 1997  Fred Fish  <fnf@cygnus.com>
 571
 572         * tic80-opc.c (V_a, V_m, V_S, V_Z, V_p, OP_V, MASK_V):
 573         New macros for building vector instruction opcodes.
 574         (tic80_opcodes): Remove all uses of FMT_SI, FMT_REG, and
 575         FMT_LI, which were unused.  The field is now a flags field.
 576         Remove some opcodes that are possible, but illegal, such
 577         as long immediate instructions with doubles for immediate
 578         values.  Add "vadd" and "vld" instructions.
 579
 580 Wed Jan 15 18:59:51 1997  Fred Fish  <fnf@cygnus.com>
 581
 582         * tic80-opc.c (tic80_operands): Reorder some table entries to make
 583         the order more logical.  Move the shift alias instructions ("rotl",
 584         "shl", "ins", "rotr", "extu", "exts", "srl", and "sra" to be
 585         interspersed with the regular sr.x and sl.x instructions.  Add
 586         and test new instruction opcodes for "sl", "sli", "sr", "sri", "st",
 587         "sub", "subu", "swcr", and "trap".
 588
 589 Tue Jan 14 19:42:50 1997  Fred Fish  <fnf@cygnus.com>
 590
 591         * tic80-opc.c (OFF_SS_PC): Renamed from OFF_SS.
 592         (OFF_SL_PC): Renamed from OFF_SL.
 593         (OFF_SS_BR): New operand type for base relative operand.
 594         (OFF_SL_BR): New operand type for base relative operand.
 595         (REG_BASE): New operand type for base register operand.
 596         (tic80_opcodes): Add and test "fmpy", "frndm", "frndn", "frndp",
 597         "frndz", "fsqrt", "fsub", "illop0", "illopF", "ins", "jsr",
 598         "ld", "ld.u", "lmo", "or", "rdcr", "rmo", "rotl", and "rotr"
 599         instructions.
 600         * tic80-dis.c (print_insn_tic80): Print opcode name with fixed width
 601         10 char field, padded with spaces on rhs, rather than a string
 602         followed by a tab.  Use renamed TIC80_OPERAND_PCREL flag bit rather
 603         than old TIC80_OPERAND_RELATIVE.  Add support for new
 604         TIC80_OPERAND_BASEREL flag bit.
 605
 606 Mon Jan 13 15:58:56 1997  Fred Fish  <fnf@cygnus.com>
 607
 608         * tic80-dis.c (print_insn_tic80): Print floating point operands
 609         as floats.
 610         * tic80-opc.c (SPFI): Add single precision floating point
 611         immediate operand type.
 612         (ROTATE): Add rotate operand type for shifts.
 613         (ENDMASK): Add for shifts.
 614         (n): Macro for the 'n' bit.
 615         (i): Macro for the 'i' bit.
 616         (PD): Macro for the 'PD' field.
 617         (P2): Macro for the 'P2' field.
 618         (P1): Macro for the 'P1' field.
 619         (tic80_opcodes): Add entries for "exts", "extu", "fadd",
 620         "fcmp", and "fdiv".
 621
 622 end-sanitize-tic80
 623 Mon Jan  6 15:06:55 1997  Jeffrey A Law  (law@cygnus.com)
 624
 625         * mn10200-dis.c (disassemble): Mask off unwanted bits after
 626         adding in current address for pc-relative operands.
 627
 628 start-sanitize-tic80
 629 Mon Jan  6 10:56:25 1997  Fred Fish  <fnf@cygnus.com>
 630
 631         * tic80-dis.c (R_SCALED): Add macro to test for ":s" modifier bit.
 632         (print_insn_tic80): If R_SCALED then print ":s" modifier for operand.
 633         * tic80-opc.c (REG0, REG22, REG27, SSOFF, LSOFF): Names
 634         changed to REG_0, REG_22, REG_DEST, OFF_SS, OFF_SL respectively.
 635         (SICR, LICR, REGM_SI, REGM_LI): Names changed to CR_SI, CR_LI,
 636         REG_BASE_M_SI, REG_BASE_M_LI respectively.
 637         (REG_SCALED, LSI_SCALED): New operand types.
 638         (E): New macro for 'E' bit at bit 27.
 639         (tic80_opcodes): Add and test dld, dld.u, dst, estop, and etrap
 640         opcodes, including the various size flavors (b,h,w,d) for
 641         the direct load and store instructions.
 642
 643 Sun Jan  5 12:18:14 1997  Fred Fish  <fnf@cygnus.com>
 644
 645         * tic80-dis.c (M_SI, M_LI): Add macros to test for ":m" modifier bit
 646         in an instruction.
 647         * tic80-dis.c (print_insn_tic80): Change comma and paren handling.
 648         Use M_SI and M_LI macros to check for ":m" modifier for GPR operands.
 649         * tic80-opc.c (tic80_operands): Add REGM_SI and REGM_LI operands.
 650         (F, M_REG, M_LI, M_SI, SZ_REG, SZ_LI, SZ_SI, D, S): New bit-twiddlers.
 651         (MASK_LI_M, MASK_SI_M, MASK_REG_M): Remove and replace in opcode
 652         masks with "MASK_* & ~M_*" to get the M bit reset.
 653         (tic80_opcodes): Add bsr, bsr.a, cmnd, cmp, dcachec, and dcachef.
 654
 655 Sat Jan  4 19:05:05 1997  Fred Fish  <fnf@cygnus.com>
 656
 657         * tic80-dis.c (print_insn_tic80): Print TIC80_OPERAND_RELATIVE
 658         correctly.  Add support for printing TIC80_OPERAND_BITNUM and
 659         TIC80_OPERAND_CC, and TIC80_OPERAND_CR operands in symbolic
 660         form.
 661         * tic80-opc.c (tic80_operands): Add SSOFF, LSOFF, BITNUM,
 662         CC, SICR, and LICR table entries.
 663         (tic80_opcodes): Add and test "nop", "br", "bbo", "bbz",
 664         "bcnd", and "brcr" opcodes.
 665
 666 end-sanitize-tic80
 667 Fri Jan  3 18:32:11 1997  Fred Fish  <fnf@cygnus.com>
 668
 669         * ppc-opc.c (powerpc_operands): Make comment match the
 670         actual fields (no shift field).
 671         * sparc-opc.c (sparc_opcodes): Document why this cannot be "const".
 672 start-sanitize-tic80
 673         * tic80-dis.c (print_insn_tic80): Replace abort stub with a
 674         partial implementation, work in progress.
 675         * tic80-opc.c (tic80_operands): Begin construction operands table.
 676         (tic80_opcodes): Continue populating opcodes table and start
 677         filling in the operand indices.
 678         (tic80_num_opcodes): Add this.
 679 end-sanitize-tic80
 680
 681 Fri Jan  3 12:13:52 1997  Ian Lance Taylor  <ian@cygnus.com>
 682
 683         * m68k-opc.c: Add #B case for moveq.
 684
 685 Thu Jan  2 12:14:29 1997  Jeffrey A Law  (law@cygnus.com)
 686
 687         * mn10300-dis.c (disassemble): Make sure all variables are initialized
 688         before they are used.
 689
 690 start-sanitize-v850
 691 Tue Dec 31 12:20:38 1996  Jeffrey A Law  (law@cygnus.com)
 692
 693         * v850-opc.c (v850_opcodes): Put curly-braces around operands
 694         for "breakpoint" instruction.
 695
 696 end-sanitize-v850
 697 Tue Dec 31 15:38:13 1996  Ian Lance Taylor  <ian@cygnus.com>
 698
 699         * Makefile.in (ALL_CFLAGS): Add -D_GNU_SOURCE.
 700         (dep): Use ALL_CFLAGS rather than CFLAGS.
 701
 702 start-sanitize-v850
 703 Tue Dec 31 15:09:16 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
 704
 705         * v850-opc.c (D8_{6,7}): Set V850_OPERAND_ADJUST_SHORT_MEMORY
 706         flag.
 707
 708 end-sanitize-v850
 709 Mon Dec 30 17:02:11 1996  Fred Fish  <fnf@cygnus.com>
 710
 711         * Makefile.in (m68k-opc.o, alpha-opc.o): Remove dis-asm.h dependency.
 712 start-sanitize-tic80
 713         (tic80-dis.o, tic80-opc.o): Add rules per comment in Makefile.in.
 714 end-sanitize-tic80
 715
 716 Mon Dec 30 11:38:01 1996  Ian Lance Taylor  <ian@cygnus.com>
 717
 718         * mips16-opc.c: Add "abs".
 719
 720 start-sanitize-tic80
 721 Sun Dec 29 10:58:22 1996  Fred Fish  <fnf@cygnus.com>
 722
 723         * Makefile.in (ALL_MACHINES): Add tic80-dis.o and tic80-opc.o.
 724         * disassemble.c (ARCH_tic80): Define if ARCH_all is defined.
 725         (disassembler): Add bfd_arch_tic80 support to set disassemble
 726         to print_insn_tic80.
 727         * tic80-dis.c (print_insn_tic80): Add stub.
 728
 729 Fri Dec 27 22:30:57 1996  Fred Fish  <fnf@cygnus.com>
 730
 731         * configure.in (arch in $selarchs): Add bfd_tic80_arch entry.
 732         * configure: Regenerate with autoconf.
 733         * tic80-dis.c: Add file.
 734         * tic80-opc.c: Add file.
 735
 736 end-sanitize-tic80
 737 Fri Dec 20 14:30:19 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
 738
 739         * d10v-opc.c (pre_defined_registers):  Add cr[0-15], dpc, dpsw, link.
 740
 741 Mon Dec 16 13:00:15 1996  Jeffrey A Law  (law@cygnus.com)
 742
 743         * mn10200-opc.c (mn10200_operands): Add SIMM16N.
 744         (mn10200_opcodes): Use it for some logicals and btst insns.
 745         Add "break" and "trap" instructions.
 746
 747         * mn10300-opc.c (mn10300_opcodes): Add "break" instruction.
 748
 749         * mn10200-opc.c: Add pseudo-ops for "mov (an),am" and "mov an,(am)".
 750
 751 Sat Dec 14 22:36:20 1996  Ian Lance Taylor  <ian@cygnus.com>
 752
 753         * mips-dis.c (print_mips16_insn_arg): The base address of a PC
 754         relative load or add now depends upon whether the instruction is
 755         in a delay slot.
 756
 757 Wed Dec 11 09:23:46 1996  Jeffrey A Law  (law@cygnus.com)
 758
 759         * mn10200-dis.c: Finish writing disassembler.
 760         * mn10200-opc.c (mn10200_opcodes): Fix mask for "mov imm8,dn".
 761         Fix mask for "jmp (an)".
 762
 763         * mn10300-dis.c (disassemble, print_insn_mn10300): Corrently
 764         handle endianness issues for mn10300.
 765
 766         * mn10200-opc.c (mn10200_opcodes): Fix operands for "movb dm,(an)".
 767
 768 Tue Dec 10 12:08:05 1996  Jeffrey A Law  (law@cygnus.com)
 769
 770         * mn10200-opc.c (mn10200_opcodes): "mov imm8,d0" is a format 2
 771         instruction.  Fix opcode field for "movb (imm24),dn".
 772
 773         * mn10200-opc.c (mn10200_operands): Fix insertion position
 774         for DI operand.
 775
 776 Mon Dec  9 16:42:43 1996  Jeffrey A Law  (law@cygnus.com)
 777
 778         * mn10200-opc.c: Create mn10200 opcode table.
 779         * mn10200-dis.c: Flesh out mn10200 disassembler.  Not ready,
 780         but moving along nicely.
 781
 782 Sun Dec  8 04:28:31 1996  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
 783
 784         * Makefile.in (ALL_MACHINES):  Add mips16-opc.o.
 785
 786 Fri Dec  6 16:47:40 1996  J.T. Conklin  <jtc@rhino.cygnus.com>
 787
 788         * m68k-opc.c (m68k_opcodes): Revert change to use < and >
 789         specifiers for fmovem* instructions.
 790
 791 Fri Dec  6 14:48:09 1996  Jeffrey A Law  (law@cygnus.com)
 792
 793         * mn10300-dis.c (disassemble): Remove '$' register prefixing.
 794
 795 Fri Dec  6 17:34:39 1996  Ian Lance Taylor  <ian@cygnus.com>
 796
 797         * mips16-opc.c: Change opcode for entry/exit to avoid conflicting
 798         with dsrl.
 799
 800 Fri Dec  6 14:48:09 1996  Jeffrey A Law  (law@cygnus.com)
 801
 802         * mn10300-opc.c: Add some comments explaining the various
 803         operands and such.
 804
 805         * mn10300-dis.c (disassemble): Fix minor gcc -Wall warnings.
 806
 807 Thu Dec  5 12:09:48 1996  J.T. Conklin  <jtc@rtl.cygnus.com>
 808
 809         * m68k-dis.c (print_insn_arg): Handle new < and > operand
 810         specifiers.
 811
 812         * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
 813         operand specifiers in fmovm* instructions.
 814
 815 Wed Dec  4 14:52:18 1996  Ian Lance Taylor  <ian@cygnus.com>
 816
 817         * ppc-opc.c (insert_li): Give an error if the offset has the two
 818         least significant bits set.
 819
 820 Wed Nov 27 13:09:01 1996  Ian Lance Taylor  <ian@cygnus.com>
 821
 822         * mips-dis.c (print_insn_mips16): Separate the instruction from
 823         the arguments with a tab, not a space.
 824
 825 Tue Nov 26 13:24:17 1996  Jeffrey A Law  (law@cygnus.com)
 826
 827         * mn10300-dis.c (disasemble): Finish conversion to '$' as
 828         register prefix.
 829
 830         * mn10300-opc.c (mn10300_opcodes): Fix mask field for
 831         mov am,(imm32,sp).
 832
 833 Tue Nov 26 10:53:21 1996  Ian Lance Taylor  <ian@cygnus.com>
 834
 835         * configure: Rebuild with autoconf 2.12.
 836
 837         Add support for mips16 (16 bit MIPS implementation):
 838         * mips16-opc.c: New file.
 839         * mips-dis.c: Include "elf-bfd.h" and "elf/mips.h".
 840         (mips16_reg_names): New static array.
 841         (print_insn_big_mips): Use print_insn_mips16 in 16 bit mode or
 842         after seeing a 16 bit symbol.
 843         (print_insn_little_mips): Likewise.
 844         (print_insn_mips16): New static function.
 845         (print_mips16_insn_arg): New static function.
 846         * mips-opc.c: Add jalx instruction.
 847         * Makefile.in (mips16-opc.o): New target.
 848         * configure.in: Use mips16-opc.o for bfd_mips_arch.
 849         * configure: Rebuild.
 850
 851 Mon Nov 25 16:15:17 1996  J.T. Conklin  <jtc@cygnus.com>
 852
 853         * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
 854         operand specifiers in *save, *restore and movem* instructions.
 855
 856         * m68k-opc.c (m68k_opcodes): Fix move and movem instructions for
 857         the coldfire.
 858
 859         * m68k-opc.c (m68k_opcodes): The coldfire (mcf5200) can only use
 860         register operands for immediate arithmetic, not, neg, negx, and
 861         set according to condition instructions.
 862
 863         * m68k-opc.c (m68k_opcodes): Consistantly Use "s" as the storage
 864         specifier of the effective-address operand in immediate forms of
 865         arithmetic instructions.  The specifier for the immediate operand
 866         notes how and where the constant will be stored.
 867
 868 Mon Nov 25 11:17:01 1996  Jeffrey A Law  (law@cygnus.com)
 869
 870         * mn10300-opc.c (mn10300_opcodes): Remove redundant "lcc"
 871         opcode.
 872
 873         * mn10300-dis.c (disassemble): Use '$' instead of '%' for
 874         register prefix.
 875
 876         * mn10300-dis.c (disassemble): Prefix registers with '%'.
 877
 878 Wed Nov 20 10:37:13 1996  Jeffrey A Law  (law@cygnus.com)
 879
 880         * mn10300-dis.c (disassemble): Handle register lists.
 881
 882         * mn10300-opc.c: Fix handling of register list operand for
 883         "call", "ret", and "rets" instructions.
 884
 885         * mn10300-dis.c (disassemble): Print PC-relative and memory
 886         addresses symbolically if possible.
 887         * mn10300-opc.c: Distinguish between absolute memory addresses,
 888         pc-relative offsets & random immediates.
 889
 890         * mn10300-dis.c (print_insn_mn10300): Fix fetch of last byte
 891         in 7 byte insns.
 892         (disassemble): Handle SPLIT and EXTENDED operands.
 893
 894 Tue Nov 19 13:33:01 1996  Jeffrey A Law  (law@cygnus.com)
 895
 896         * mn10300-dis.c: Rough cut at printing some operands.
 897
 898         * mn10300-dis.c: Start working on disassembler support.
 899         * mn10300-opc.c (mn10300_opcodes): Fix masks on several insns.
 900
 901         * mn10300-opc.c (mn10300_operands): Add "REGS" for a register
 902         list.
 903         (mn10300_opcodes): Use REGS for register list in "movm" instructions.
 904
 905 Mon Nov 18 15:20:35 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
 906
 907         * d10v-opc.c (d10v_opcodes): Add3 sets the carry.
 908
 909 Fri Nov 15 13:43:19 1996  Jeffrey A Law  (law@cygnus.com)
 910
 911         * mn10300-opc.c (mn10300_opcodes): Demand parens around
 912         register argument is calls and jmp instructions.
 913
 914 Thu Nov  7 00:26:05 1996  Jeffrey A Law  (law@cygnus.com)
 915
 916         * mn10300-opc.c (mn10300_opcodes): Use DN01 for putx and
 917         getx operand.  Fix opcode for mulqu imm,dn.
 918
 919 Wed Nov  6 13:42:32 1996  Jeffrey A Law  (law@cygnus.com)
 920
 921         * mn10300-opc.c (mn10300_operands): Hijack "bits" field
 922         in MN10300_OPERAND_SPLIT operands for how many bits
 923         appear in the basic insn word.  Add IMM32_HIGH24,
 924         IMM32_HIGH24_LOWSHIFT8, IMM8E_SHIFT8.
 925         (mn10300_opcodes): Use new operands as needed.
 926
 927         * mn10300-opc.c (mn10300_operands): Add IMM32_LOWSHIFT8
 928         for bset, bclr, btst instructions.
 929         (mn10300_opcodes): Use new IMM32_LOWSHIFT8 as needed.
 930
 931         * mn10300-opc.c (mn10300_operands): Remove many redundant
 932         operands.  Update opcode table as appropriate.
 933         (IMM32): Add MN10300_OPERAND_SPLIT flag.
 934         (mn10300_opcodes): Fix single bit error in mov imm32,dn insn.
 935
 936 Tue Nov  5 13:26:58 1996  Jeffrey A Law  (law@cygnus.com)
 937
 938         * mn10300-opc.c (mn10300_operands): Add DN2, DM2, AN2, AM2
 939         operands (for indexed load/stores).  Fix bitpos for DI
 940         operand.  Add SN8N_SHIFT8, IMM8_SHIFT8, and D16_SHIFT for the
 941         few instructions that insert immediates/displacements in the
 942         middle of the instruction.  Add IMM8E for 8 bit immediate in
 943         the extended part of an instruction.
 944         (mn10300_operands): Use new opcodes as appropriate.
 945
 946 Tue Nov  5 10:30:51 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
 947
 948         * d10v-opc.c (d10v_opcodes): Declare the trap instruction
 949         sequential so the assembler never parallelizes it with
 950         other instructions.
 951
 952 Mon Nov  4 12:50:40 1996  Jeffrey A Law  (law@cygnus.com)
 953
 954         * mn10300-opc.c (mn10300_operands): Add DN01 and AN01 for
 955         a data/address register that appears in register field 0
 956         and register field 1.
 957         (mn10300_opcodes): Use DN01 and AN01 for mov/cmp imm8,DN/AN
 958
 959 Fri Nov  1 10:29:11 1996  Richard Henderson  <rth@tamu.edu>
 960
 961         * alpha-dis.c (print_insn_alpha): Use new NOPAL mask for
 962         standard disassembly.
 963
 964         * alpha-opc.c (alpha_operands): Rearrange flags slot.
 965         (alpha_opcodes): Add new BWX, CIX, and MAX instructions.
 966         Recategorize PALcode instructions.
 967
 968 start-sanitize-v850
 969 Wed Oct 30 16:46:58 1996  Jeffrey A Law  (law@cygnus.com)
 970
 971         * v850-opc.c (v850_opcodes): Add relaxing "jbr".
 972
 973 end-sanitize-v850
 974 Tue Oct 29 16:30:28 1996  Ian Lance Taylor  <ian@cygnus.com>
 975
 976         * mips-dis.c (_print_insn_mips): Don't print a trailing tab if
 977         there are no operand types.
 978
 979 start-sanitize-v850
 980 Tue Oct 29 12:22:21 1996  Jeffrey A Law  (law@cygnus.com)
 981
 982         * v850-opc.c (D9_RELAX): Renamed from D9, all references
 983         changed.
 984         (v850_operands): Make sure D22 immediately follows D9_RELAX.
 985
 986 end-sanitize-v850
 987 Fri Oct 25 12:12:53 1996  Ian Lance Taylor  <ian@cygnus.com>
 988
 989         * i386-dis.c (print_insn_x86): Set info->bytes_per_line to 5.
 990
 991 start-sanitize-v850
 992 Thu Oct 24 17:53:52 1996  Jeffrey A Law  (law@cygnus.com)
 993
 994         * v850-opc.c (insert_d8_6): Fix operand insertion for sld.w
 995         and sst.w instructions.
 996
 997         * v850-opc.c (v850_opcodes): Add "jCC" instructions (aliases for
 998         "bCC"instructions).
 999
1000 end-sanitize-v850
1001 Thu Oct 24 17:21:20 1996  Ian Lance Taylor  <ian@cygnus.com>
1002
1003         * mips-dis.c (_print_insn_mips): Use a tab between the instruction
1004         and the arguments.
1005
1006 Tue Oct 22 23:32:56 1996  Ian Lance Taylor  <ian@cygnus.com>
1007
1008         * ppc-opc.c (PPCPWR2): Define.
1009         (powerpc_opcodes): Use PPCPWR2 for fsqrt, rather than duplicating
1010         it.
1011
1012 Fri Oct 11 16:03:49 1996  Jeffrey A Law  (law@cygnus.com)
1013
1014         * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode
1015         field for movhu instruction.
1016 start-sanitize-v850
1017
1018         * v850-dis.c (disassemble): For V850_OPERAND_SIGNED operands,
1019         cast value to "long" not "signed long" to keep hpux10
1020         compiler quiet.
1021 end-sanitize-v850
1022
1023 Thu Oct 10 10:25:58 1996  Jeffrey A Law  (law@cygnus.com)
1024
1025         * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode field
1026         for mov (abs16),DN.
1027
1028         * mn10300-opc.c (FMT*): Remove definitions.
1029
1030         * mn10300-opc.c (mn10300_opcodes): Fix destination register
1031         for shift-by-register opcodes.
1032
1033         * mn10300-opc.c (mn10300_operands): Break DN, DM, AN, AM
1034         into [AD][MN][01] for encoding the position of the register
1035         in the opcode.
1036
1037 Wed Oct  9 11:19:26 1996  Jeffrey A Law  (law@cygnus.com)
1038
1039         * mn10300-opc.c (mn10300_opcodes): Add "extended" instructions,
1040         "putx", "getx", "mulq", "mulqu", "sat16", "sat24", "bsch".
1041
1042 Tue Oct  8 11:55:35 1996  Jeffrey A Law  (law@cygnus.com)
1043
1044         * mn10300-opc.c (mn10300_operands): Remove "REGS" operand.
1045         Fix various typos.  Add "PAREN" operand.
1046         (MEM, MEM2): Define.
1047         (mn10300_opcodes): Surround all memory addresses with "PAREN"
1048         operands.  Fix several typos.
1049
1050         * mn10300-opc.c (mn10300_opcodes): Fix typos in yesterday's
1051         changes.
1052
1053 Mon Oct  7 16:48:45 1996  Jeffrey A Law  (law@cygnus.com)
1054
1055         * mn10300-opc.c (FMT_XX): Renumber starting at one.
1056         (mn10300_operands): Rough cut.  Enough to parse "mov" instructions
1057         at this time.
1058         (mn10300_opcodes): Break opcode format out into its own field.
1059         Update many operand fields to deal with signed vs unsigned
1060         issues.  Fix one or two typos in the "mov" instruction
1061         opcode, mask and/or operand fields.
1062
1063 Mon Oct  7 11:39:49 1996  Andreas Schwab  <schwab@issan.informatik.uni-dortmund.de>
1064
1065         * m68k-opc.c (plusha): Prefer encoding for m68040up, in case
1066         m68851 wasn't reset.
1067
1068 Thu Oct  3 17:17:02 1996  Ian Lance Taylor  <ian@cygnus.com>
1069
1070         * mn10300-opc.c (mn10300_opcodes): Add opcode & masks for
1071         all opcodes.  Very rough cut at operands for all opcodes.
1072
1073         * mn10300-opc.c (mn10300_opcodes): Start fleshing out the
1074         opcode table.
1075
1076 Thu Oct  3 10:06:07 1996  Jeffrey A Law  (law@cygnus.com)
1077
1078         * mn10200-opc.c, mn10300-opc.c: New files.
1079         * mn10200-dis.c, mn10300-dis.c: New files.
1080         * mn10x00-opc.c, mn10x00-dis.c: Deleted.
1081         * disassemble.c: Break mn10x00 support into 10200 and 10300
1082         support.
1083         * configure.in: Likewise.
1084         * configure: Rebuilt.
1085
1086 Thu Oct  3 15:59:12 1996  Jason Molenda  (crash@godzilla.cygnus.co.jp)
1087
1088         * Makefile.in (MOSTLYCLEAN): Move config.log to distclean.
1089
1090 Wed Oct  2 23:28:42 1996  Jeffrey A Law  (law@cygnus.com)
1091
1092         * mn10x00-opc.c, mn10x00-dis.c: New files for Matsushita
1093         MN10x00 processors.
1094         * disassemble (ARCH_mn10x00): Define.
1095         (disassembler): Handle bfd_arch_mn10x00.
1096         * configure.in: Recognize bfd_mn10x00_arch.
1097         * configure: Rebuilt.
1098
1099 Tue Oct  1 10:49:11 1996  Ian Lance Taylor  <ian@cygnus.com>
1100
1101         * i386-dis.c (op_rtn): Change to be a pointer.  Adjust uses
1102         accordingly.  Don't declare functions using op_rtn.
1103
1104 start-sanitize-v850
1105 Fri Sep 27 18:28:59 1996  Stu Grossman  (grossman@critters.cygnus.com)
1106
1107         * v850-dis.c (disassemble):  Add memaddr argument.  Re-arrange
1108         params to be more standard.
1109         * (disassemble):  Print absolute addresses and symbolic names for
1110         branch and jump targets.
1111         * v850-opc.c (v850_operand):  Add displacement flag to 9 and 22
1112         bit operands.
1113         * (v850_opcodes):  Add breakpoint insn.
1114
1115 end-sanitize-v850
1116 Mon Sep 23 12:32:26 1996  Ian Lance Taylor  <ian@cygnus.com>
1117
1118         * m68k-opc.c: Move the fmovemx data register cases before the
1119         other cases, so that they get recognized before the data register
1120         does gets treated as a degenerate register list.
1121
1122 Tue Sep 17 12:06:51 1996  Ian Lance Taylor  <ian@cygnus.com>
1123
1124         * mips-opc.c: Add a case for "div" and "divu" with two registers
1125         and a destination of $0.
1126
1127 Tue Sep 10 16:12:39 1996  Fred Fish  <fnf@rtl.cygnus.com>
1128
1129         * mips-dis.c (print_insn_arg): Add prototype.
1130         (_print_insn_mips): Ditto.
1131
1132 Mon Sep  9 14:26:26 1996  Ian Lance Taylor  <ian@cygnus.com>
1133
1134         * mips-dis.c (print_insn_arg): Print condition code registers as
1135         $fccN.
1136
1137 Tue Sep  3 12:09:46 1996  Doug Evans  <dje@canuck.cygnus.com>
1138
1139         * sparc-opc.c (sparc_opcodes): Add setuw, setsw, setx.
1140
1141 start-sanitize-v850
1142 Tue Sep  3 12:05:25 1996  Jeffrey A Law  (law@cygnus.com)
1143
1144         * v850-dis.c (disassemble): Make static.  Provide prototype.
1145
1146 Sun Sep  1 22:30:40 1996  Jeffrey A Law  (law@cygnus.com)
1147
1148         * v850-opc.c (insert_d9, insert_d22): Fix boundary case
1149         in range checks.
1150
1151 Sat Aug 31 01:27:26 1996  Jeffrey A Law  (law@cygnus.com)
1152
1153         * v850-dis.c (disassemble): Handle insertion of ',', '[' and
1154         ']' characters into the output stream.
1155         * v850-opc.c (v850_opcodes: Remove size field from all opcodes.
1156         Add "memop" field to all opcodes (for the disassembler).
1157         Reorder opcodes so that "nop" comes before "mov" and "jr"
1158         comes before "jarl".
1159
1160         * v850-dis.c (print_insn_v850): Fix typo in last change.
1161
1162         * v850-dis.c (print_insn_v850): Properly handle disassembling
1163         a two byte insn at the end of a memory region when the memory
1164         region's size is only two byte aligned.
1165
1166         * v850-dis.c (v850_cc_names): Fix stupid thinkos.
1167
1168         * v850-dis.c (v850_reg_names): Define.
1169         (v850_sreg_names, v850_cc_names): Likewise.
1170         (disassemble): Very rough cut at printing operands (unformatted).
1171
1172         * v850-opc.c (BOP_MASK): Fix.
1173         (v850_opcodes): Fix mask for jarl and jr.
1174
1175         * v850-dis.c: New file.  Skeleton for disassembler support.
1176         * Makefile.in Remove v850 references, they're not needed here
1177         and they weren't being sanitized away.
1178         * configure.in: Add v850-dis.o when building v850 toolchains.
1179         * configure: Rebuilt.
1180         * disassemble.c (disassembler): Call v850 disassembler.
1181
1182         * v850-opc.c (insert_d8_7, extract_d8_7): New functions.
1183         (insert_d8_6, extract_d8_6): New functions.
1184         (v850_operands): Rename D7S to D7; operand for D7 is unsigned.
1185         Rename D8 to D8_7, use {insert,extract}_d8_7 routines.
1186         Add D8_6.
1187         (IF4A, IF4B): Use "D7" instead of "D7S".
1188         (IF4C, IF4D): Use "D8_7" instead of "D8".
1189         (IF4E, IF4F): New.  Use "D8_6".
1190         (v850_opcodes): Use IF4A/IF4B for sld.b/sst.b.  Use IF4C/IF4D for
1191         sld.h/sst.h.  Use IF4E/IF4F for sld.w/sst.w.
1192
1193         * v850-opc.c (insert_d16_15, extract_d16_15): New functions.
1194         (v850_operands): Change D16 to D16_15, use special insert/extract
1195         routines.  New new D16 that uses the generic insert/extract code.
1196         (IF7A, IF7B): Use D16_15.
1197         (IF7C, IF7D): New.  Use D16.
1198         (v850_opcodes): Use IF7C and IF7D for ld.b and st.b.
1199
1200         * v850-opc.c (insert_d9, insert_d22): Slightly improve error
1201         message.  Issue an error if the branch offset is odd.
1202
1203         * v850-opc.c: Add notes about needing special insert/extract
1204         for all the load/store insns, except "ld.b" and "st.b".
1205
1206         * v850-opc.c (insert_d22, extract_d22): New functions.
1207         (v850_operands): Use insert_d22 and extract_d22 for
1208         D22 operands.
1209         (insert_d9): Fix range check.
1210
1211 Fri Aug 30 18:01:02 1996  J.T. Conklin  <jtc@hippo.cygnus.com>
1212
1213         * v850-opc.c (v850_operands): Add V850_OPERAND_SIGNED flag
1214         and set bits field to D9 and D22 operands.
1215
1216 Thu Aug 29 11:10:46 1996  Jeffrey A Law  (law@cygnus.com)
1217
1218         * v850-opc.c (v850_operands): Define SR2 operand.
1219         (v850_opcodes): "ldsr" uses R1,SR2.
1220
1221         * v850-opc.c (v850_opcodes): Fix opcode specs for
1222         sld.w, sst.b, sst.h, sst.w, and nop.
1223
1224 Wed Aug 28 15:55:43 1996  Jeffrey A Law  (law@cygnus.com)
1225
1226         * v850-opc.c (v850_opcodes): Add null opcode to mark the
1227         end of the opcode table.
1228
1229 end-sanitize-v850
1230 Mon Aug 26 13:35:53 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
1231
1232         * d10v-opc.c (pre_defined_registers): Added register pairs,
1233         "r0-r1", "r2-r3", etc.
1234
1235 start-sanitize-v850
1236 Fri Aug 23 00:27:01 1996  Jeffrey A Law  (law@cygnus.com)
1237
1238         * v850-opc.c (v850_operands): Make I16 be a signed operand.
1239         Create I16U for an unsigned 16bit mmediate operand.
1240         (v850_opcodes): Use I16U for "ori", "andi" and "xori".
1241
1242         * v850-opc.c (v850_operands): Define EP operand.
1243         (IF4A, IF4B, IF4C, IF4D): Use EP.
1244
1245         * v850-opc.c (v850_opcodes): Fix opcode numbers for "mov"
1246         with immediate operand, "movhi".  Tweak "ldsr".
1247
1248         * v850-opc.c (v850_opcodes): Get ld.[bhw] and st.[bhw]
1249         correct.  Get sld.[bhw] and sst.[bhw] closer.
1250
1251         * v850-opc.c (v850_operands): "not" is a two byte insn
1252
1253         * v850-opc.c (v850_opcodes): Correct bit pattern for setf.
1254
1255         * v850-opc.c (v850_operands): D16 inserts at offset 16!
1256
1257         * v850-opc.c (two): Get order of words correct.
1258
1259         * v850-opc.c (v850_operands): I16 inserts at offset 16!
1260
1261         * v850-opc.c (v850_operands): Add "SR1" and "SR2" for system
1262         register source and destination operands.
1263         (v850_opcodes): Use SR1 and SR2 for "ldsr" and "stsr".
1264
1265         * v850-opc.c (v850_opcodes): Fix thinko in "jmp" opcode.  Fix
1266         same thinko in "trap" opcode.
1267
1268         * v850-opc.c (v850_opcodes): Add initializer for size field
1269         on all opcodes.
1270
1271         * v850-opc.c (v850_operands): D6 -> DS7.  References changed.
1272         Add D8 for 8-bit unsigned field in short load/store insns.
1273         (IF4A, IF4D): These both need two registers.
1274         (IF4C, IF4D): Define.  Use 8-bit unsigned field.
1275         (v850_opcodes): For "sld.h", "sld.w", "sst.h", "sst.w", use
1276         IF4C & IF4D.  For "trap" use I5U, not I5.  Add IF1 operand
1277         for "ldsr" and "stsr".
1278         * v850-opc.c (v850_operands): 3-bit immediate for bit insns
1279         is unsigned.
1280
1281         * v850-opc.c (v850_opcodes): Correct short store half (sst.h) and
1282         short store word (sst.w).
1283
1284 Thu Aug 22 16:57:27 1996  J.T. Conklin  <jtc@rtl.cygnus.com>
1285
1286         * v850-opc.c (v850_operands): Added insert and extract fields,
1287         pointers to functions that handle unusual operand encodings.
1288
1289 Thu Aug 22 01:05:24 1996  Jeffrey A Law  (law@cygnus.com)
1290
1291         * v850-opc.c (v850_opcodes): Enable "trap".
1292
1293         * v850-opc.c (v850_opcodes): Fix order of displacement
1294         and register for "set1", "clr1", "not1", and "tst1".
1295
1296 Wed Aug 21 18:46:26 1996  Jeffrey A Law  (law@cygnus.com)
1297
1298         * v850-opc.c (v850_operands): Add "B3" support.
1299         (v850_opcodes): Fix and enable "set1", "clr1", "not1"
1300         and "tst1".
1301
1302         * v850-opc.c (v850_opcodes): "jmp" has only an R1 operand.
1303
1304         * v850-opc.c: Close unterminated comment.
1305
1306 Wed Aug 21 17:31:26 1996  J.T. Conklin  <jtc@hippo.cygnus.com>
1307
1308         * v850-opc.c (v850_operands): Add flags field.
1309         (v850_opcodes): add move opcodes.
1310
1311 Tue Aug 20 14:41:03 1996  J.T. Conklin  <jtc@hippo.cygnus.com>
1312
1313         * Makefile.in (ALL_MACHINES): Add v850-opc.o.
1314         * configure: (bfd_v850v_arch) Add new case.
1315         * configure.in: (bfd_v850_arch) Add new case.
1316         * v850-opc.c: New file.
1317
1318 end-sanitize-v850
1319 Mon Aug 19 15:21:38 1996  Doug Evans  <dje@canuck.cygnus.com>
1320
1321         * sparc-dis.c (print_insn_sparc): Handle little endian sparcs.
1322
1323 Thu Aug 15 13:14:43 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
1324
1325         * d10v-opc.c: Add additional information to the opcode
1326         table to help determinine which instructions can be done
1327         in parallel.
1328
1329 Thu Aug 15 13:11:13 1996  Stan Shebs  <shebs@andros.cygnus.com>
1330
1331         * mpw-make.sed: Update editing of include pathnames to be
1332         more general.
1333
1334 Thu Aug 15 16:28:41 1996  James G. Smith  <jsmith@cygnus.co.uk>
1335
1336         * arm-opc.h: Added "bx" instruction definition.
1337
1338 Wed Aug 14 17:00:04 1996  Richard Henderson  <rth@tamu.edu>
1339
1340         * alpha-opc.c (EV4EXTHWINDEX): Field width should be 8 not 5.
1341
1342 Mon Aug 12 14:30:37 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
1343
1344         * d10v-opc.c (d10v_opcodes): Minor fixes to addi and bl.l.
1345
1346 Fri Aug  9 13:21:59 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
1347
1348         * d10v-opc.c (d10v_opcodes): Correct 'mv' unit entry to EITHER.
1349
1350 Thu Aug  8 12:43:52 1996  Klaus Kaempf  <kkaempf@progis.de>
1351
1352         * makefile.vms: Update for alpha-opc changes.
1353
1354 Wed Aug  7 11:55:10 1996  Ian Lance Taylor  <ian@cygnus.com>
1355
1356         * i386-dis.c (print_insn_i386): Actually return the correct value.
1357         (ONE, OP_ONE): #ifdef out; not used.
1358
1359 Fri Aug  2 17:47:03 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
1360
1361         * d10v-opc.c (d10v_opcodes): Added 2 accumulator sub instructions.
1362         Changed subi operand type to treat 0 as 16.
1363
1364 Wed Jul 31 16:21:41 1996  Ian Lance Taylor  <ian@cygnus.com>
1365
1366         * m68k-opc.c: Add cpushl for the mcf5200.  From Ken Rose
1367         <rose@netcom.com>.
1368
1369 Wed Jul 31 14:39:27 1996  James G. Smith  <jsmith@cygnus.co.uk>
1370
1371         * arm-opc.h: (arm_opcodes): Added halfword and sign-extension
1372         memory transfer instructions. Add new format string entries %h and %s.
1373         * arm-dis.c: (print_insn_arm): Provide decoding of the new
1374         formats %h and %s.
1375
1376 Fri Jul 26 11:45:04 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
1377
1378         * d10v-opc.c (d10v_operands): Added UNUM4S; a 4-bit accumulator shift.
1379         (d10v_opcodes): Modified accumulator shift instructions to use UNUM4S.
1380
1381 Fri Jul 26 14:01:43 1996  Ian Lance Taylor  <ian@cygnus.com>
1382
1383         * alpha-dis.c (print_insn_alpha_osf): Remove.
1384         (print_insn_alpha_vms): Remove.
1385         (print_insn_alpha): Make globally visible.  Chose the register
1386         names based on info->flavour.
1387         * disassemble.c: Always return print_insn_alpha for the alpha.
1388
1389 Thu Jul 25 15:24:17 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
1390
1391         * d10v-dis.c (dis_long): Handle unknown opcodes.
1392
1393 Thu Jul 25 12:08:09 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
1394
1395         * d10v-opc.c: Changes to support signed and unsigned numbers.
1396         All instructions with the same name that have long and short forms
1397         now end in ".l" or ".s".  Divs added.
1398         * d10v-dis.c: Changes to support signed and unsigned numbers.
1399
1400 Tue Jul 23 11:02:53 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
1401
1402         * d10v-dis.c: Change all functions to use info->print_address_func.
1403
1404 Mon Jul 22 15:38:53 1996  Andreas Schwab  <schwab@issan.informatik.uni-dortmund.de>
1405
1406         * m68k-opc.c (m68k_opcodes): Make opcode masks for the ColdFire
1407         move ccr/sr insns more strict so that the disassembler only
1408         selects them when the addressing mode is data register.
1409
1410 Mon Jul 22 11:25:24 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
1411         * d10v-opc.c (pre_defined_registers):  Declare.
1412         * d10v-dis.c (print_operand): Now uses pre_defined_registers
1413         to pick a better name for the registers.
1414
1415 Mon Jul 22 13:47:23 1996  Ian Lance Taylor  <ian@cygnus.com>
1416
1417         * sparc-opc.c: Fix opcode values for fpack16, and fpackfix.  Fix
1418         operands for fexpand and fpmerge.  From Christian Kuehnke
1419         <Christian.Kuehnke@arbi.informatik.uni-oldenburg.de>.
1420
1421 Mon Jul 22 13:17:06 1996  Richard Henderson  <rth@tamu.edu>
1422
1423         * alpha-dis.c (print_insn_alpha): No longer the user-visible
1424         print routine.  Take new regnames and cpumask arguments.
1425         Kill the environment variable nonsense.
1426         (print_insn_alpha_osf): New function.  Do OSF/1 style regnames.
1427         (print_insn_alpha_vms): New function.  Do VMS style regnames.
1428         * disassemble.c (disassembler): Test bfd flavour to pick
1429         between OSF and VMS routines.  Default to OSF.
1430
1431 Thu Jul 18 17:19:34 1996  Ian Lance Taylor  <ian@cygnus.com>
1432
1433         * configure.in: Call AC_SUBST (INSTALL_SHLIB).
1434         * configure: Rebuild.
1435         * Makefile.in (install): Use @INSTALL_SHLIB@.
1436
1437 Wed Jul 17 14:39:05 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
1438
1439         * configure: (bfd_d10v_arch) Add new case.
1440         * configure.in: (bfd_d10v_arch) Add new case.
1441         * d10v-dis.c: New file.
1442         * d10v-opc.c: New file.
1443         * disassemble.c (disassembler) Add entry for d10v.
1444
1445 Wed Jul 17 10:12:05 1996  J.T. Conklin  <jtc@rtl.cygnus.com>
1446
1447         * m68k-opc.c (m68k_opcodes): Fix bugs in coldfire insns relating
1448         to bcc, trapfl, subxl, and wddata discovered by Andreas Schwab.
1449
1450 Mon Jul 15 16:59:55 1996  Stu Grossman  (grossman@critters.cygnus.com)
1451
1452         * i386-dis.c:  Get rid of print_insn_i8086.  Use info.mach to
1453         distinguish between variants of the instruction set.
1454         * sparc-dis.c:  Get rid of print_insn_sparclite.  Use info.mach to
1455         distinguish between variants of the instruction set.
1456
1457 Fri Jul 12 10:12:01 1996  Stu Grossman  (grossman@critters.cygnus.com)
1458
1459         * i386-dis.c (print_insn_i8086):  New routine to disassemble using
1460         the 8086 instruction set.
1461         * i386-dis.c:  General cleanups.  Make most things static.  Add
1462         prototypes.  Get rid of static variables aflags and dflags.  Pass
1463         them as args (to almost everything).
1464
1465 Thu Jul 11 11:58:44 1996  Jeffrey A Law  (law@cygnus.com)
1466
1467         * h8300-dis.c (bfd_h8_disassemble): Handle macregs in ldmac insns.
1468
1469         * h8300-dis.c (bfd_h8_disassemble): Handle "ldm.l" and "stm.l".
1470
1471         * h8300-dis.c (bfd_h8_disassemble): "abs" is implicitly two
1472         if the next arg is marked with SRC_IN_DST.  Gross.
1473
1474         * h8300-dis.c (bfd_h8_disassemble): Print "exr" when
1475         we're looking for and find EXR.
1476
1477         * h8300-dis.c (bfd_h8_disassemble): We don't have a match
1478         if we're looking for KBIT and we don't find it.
1479
1480         * h8300-dis.c (bfd_h8_disassemble): Mask off unwanted bits
1481         for L_3 and L_2.
1482
1483         * h8300-dis.c (bfd_h8_disassemble): Don't set plen for
1484         3bit immediate operands.
1485
1486 Tue Jul  9 10:55:20 1996  Ian Lance Taylor  <ian@cygnus.com>
1487
1488         * Released binutils 2.7.
1489
1490         * alpha-opc.c: Add new case of "mov".  From Klaus Kaempf
1491         <kkaempf@progis.ac-net.de>.
1492
1493 Thu Jul  4 11:42:51 1996  Ian Lance Taylor  <ian@cygnus.com>
1494
1495         * alpha-opc.c: Correct second case of "mov" to use OPRL.
1496
1497 Wed Jul  3 16:03:47 1996  Stu Grossman  (grossman@critters.cygnus.com)
1498
1499         * sparc-dis.c (print_insn_sparclite):  New routine to print
1500         sparclite instructions.
1501
1502 Wed Jul  3 14:21:18 1996  J.T. Conklin  <jtc@rtl.cygnus.com>
1503
1504         * m68k-opc.c (m68k_opcodes): Add coldfire support.
1505
1506 Fri Jun 28 15:53:51 1996  Doug Evans  <dje@canuck.cygnus.com>
1507
1508         * sparc-opc.c (asi_table): Add #ASI_N, #ASI_N_L, #ASI_NUCLEUS,
1509         #ASI_NUCLEUS_LITTLE.  Rename #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_L
1510         to #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_LITTLE.
1511
1512 Tue Jun 25 22:58:31 1996  Jason Molenda  (crash@godzilla.cygnus.co.jp)
1513
1514         * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir):
1515         Use autoconf-set values.
1516         (docdir, oldincludedir): Removed.
1517         * configure.in (AC_PREREQ): autoconf 2.5 or higher.
1518
1519 Fri Jun 21 13:53:36 1996  Richard Henderson  <rth@tamu.edu>
1520
1521         * alpha-opc.c: New file.
1522         * alpha-opc.h: Remove.
1523         * alpha-dis.c: Complete rewrite to use new opcode table.
1524         * configure.in: For bfd_alpha_arch, use alpha-opc.o.
1525         * configure: Rebuild with autoconf 2.10.
1526         * Makefile.in (ALL_MACHINES): Add alpha-opc.o.
1527         (alpha-dis.o): Depend upon $(INCDIR)/opcode/alpha.h, not
1528         alpha-opc.h.
1529         (alpha-opc.o): New target.
1530
1531 Wed Jun 19 15:55:12 1996  Ian Lance Taylor  <ian@cygnus.com>
1532
1533         * sparc-dis.c (print_insn_sparc): Remove unused local variable i.
1534         Set imm_added_to_rs1 even if the source and destination register
1535         are not the same.
1536
1537         * sparc-opc.c: Add some two operand forms of the wr instruction.
1538
1539 Tue Jun 18 15:58:27 1996  Jeffrey A. Law  <law@rtl.cygnus.com>
1540
1541         * h8300-dis.c (bfd_h8_disassemble): Rename "hmode" argument
1542         to just "mode".
1543
1544         * disassemble.c (disassembler): Handle H8/S.
1545         * h8300-dis.c (print_insn_h8300s): New function for H8/S.
1546
1547 Tue Jun 18 18:06:50 1996  Ian Lance Taylor  <ian@cygnus.com>
1548
1549         * sparc-opc.c: Add beq/teq as aliases for be/te.
1550
1551         * ppc-opc.c: Fix fcmpo opcode.  From Sergei Steshenko
1552         <sergei@msil.sps.mot.com>.
1553
1554 Tue Jun 18 15:08:54 1996  Klaus Kaempf  <kkaempf@progis.de>
1555
1556         * makefile.vms: New file.
1557
1558         * alpha-dis.c (print_insn_alpha): Print lda ra,lit(rz) as mov.
1559
1560 Mon Jun 10 18:50:38 1996  Ian Lance Taylor  <ian@cygnus.com>
1561
1562         * h8300-dis.c (bfd_h8_disassemble): Always print ABS8MEM with :8,
1563         regardless of plen.
1564
1565 Tue Jun  4 09:15:53 1996  Doug Evans  <dje@canuck.cygnus.com>
1566
1567         * i386-dis.c (OP_OFF): Call append_prefix.
1568
1569 Thu May 23 15:18:23 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
1570
1571         * ppc-opc.c (instruction encoding macros): Add explicit casts to
1572         unsigned long to silence a warning from the Solaris PowerPC
1573         compiler.
1574
1575 Thu Apr 25 19:33:32 1996  Doug Evans  <dje@canuck.cygnus.com>
1576
1577         * sparc-opc.c (sparc_opcodes): Add ultrasparc vis extensions.
1578
1579 Mon Apr 22 17:12:35 1996  Doug Evans  <dje@blues.cygnus.com>
1580
1581         * sparc-dis.c (X_IMM,X_SIMM): New macros.
1582         (X_IMM13): Delete.
1583         (print_insn_sparc): Merge cases i,I,j together.  New cases X,Y.
1584         * sparc-opc.c (sparc_opcodes): Use X for 5 bit shift constants,
1585         Y for 6 bit shift constants.  Rewrite entries for crdcxt, cwrcxt,
1586         cpush, cpusha, cpull sparclet insns.
1587
1588 Wed Apr 17 14:20:22 1996  Doug Evans  <dje@canuck.cygnus.com>
1589
1590         * sparc-dis.c (compute_arch_mask): Replace ANSI style def with K&R.
1591
1592 Thu Apr 11 17:30:02 1996  Ian Lance Taylor  <ian@cygnus.com>
1593
1594         * sparc-opc.c: Set F_FBR on floating point branch instructions.
1595         Set F_FLOAT on other floating point instructions.
1596
1597 Mon Apr  8 17:02:48 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
1598
1599         * ppc-opc.c (PPC860): Macro for 860/821 specific instructions and
1600         registers.
1601         (powerpc_opcodes): Add 860/821 specific SPRs.
1602
1603 Mon Apr  8 14:00:44 1996  Ian Lance Taylor  <ian@cygnus.com>
1604
1605         * configure.in: Permit --enable-shared to specify a list of
1606         directories.  Set and substitute BFD_PICLIST.
1607         * configure: Rebuild.
1608         * Makefile.in (BFD_PICLIST): Rename from BFD_LIST.  Change all
1609         uses.  Set to @BFD_PICLIST@.
1610
1611 Fri Apr  5 17:12:27 1996  Jeffrey A Law  (law@cygnus.com)
1612
1613         * h8300-dis.c (bfd_h8_disassemble): Use "bit" for L_3 immediates,
1614         not "abs", which may be needed for the absolute in something
1615         like btst #0,@10:8.  Print L_3 immediates separately from other
1616         immediates.  Change ABSMOV reference to ABS8MEM.
1617
1618 Wed Apr  3 10:40:45 1996  Doug Evans  <dje@canuck.cygnus.com>
1619
1620         * sparc-dis.c (opcodes_initialized): Move inside print_insn_sparc.
1621         (current_arch_mask): New static global.
1622         (compute_arch_mask): New static function.
1623         (print_insn_sparc): Delete sparc_v9_p.  New static local
1624         current_mach.  Resort opcode table if current_mach changes.
1625         Generalize "insn not supported" test.
1626         (compare_opcodes): Prefer supported opcodes to nonsupported ones.
1627         Delete test for v9/!v9.
1628         * sparc-opc.c (MASK_*): Use SPARC_OPCODE_ARCH_MASK.
1629         (v6notlet): Define.
1630         (brfc): Split into CBR and FBR for coprocessor/fp branches.
1631         (brfcx): Renamed to FBRX.
1632         (condfc): Renamed to CONDFC.  Pass v6notlet to CBR (standard
1633         coprocessor mnemonics are not supported on the sparclet).
1634         (condf): Renamed to CONDF.
1635         (SLCBCC2): Delete F_ALIAS flag.
1636
1637 Sat Mar 30 21:45:59 1996  Doug Evans  <dje@canuck.cygnus.com>
1638
1639         * sparc-opc.c (sparc_opcodes): rd must be 0 for
1640         mov foo,{%y,%psr,%wim,%tbr}.  Support mov foo,%asrX.
1641
1642 Fri Mar 29 13:02:40 1996  Ian Lance Taylor  <ian@cygnus.com>
1643
1644         * Makefile.in (config.status): Depend upon BFD VERSION file, so
1645         that the shared library version number is set correctly.
1646
1647 Tue Mar 26 15:47:14 1996  Ian Lance Taylor  <ian@cygnus.com>
1648
1649         * configure.in: Use AC_CHECK_TOOL to find ar and ranlib.  From
1650         Miles Bader <miles@gnu.ai.mit.edu>.
1651         * configure: Rebuild.
1652
1653 Sat Mar 16 13:04:07 1996  Fred Fish  <fnf@cygnus.com>
1654
1655         * z8kgen.c (internal, gas): Call xmalloc rather than unchecked
1656         malloc.
1657
1658 Tue Mar 12 12:14:10 1996  Ian Lance Taylor  <ian@cygnus.com>
1659
1660         * configure: Rebuild with autoconf 2.8.
1661
1662 Thu Mar  7 15:11:10 1996  Doug Evans  <dje@charmed.cygnus.com>
1663
1664         * sparc-dis.c (print_insn_sparc): Handle 'O' operand char like 'r'.
1665         * sparc-opc.c (sparc_opcodes): Use 'O' operand char for `neg reg'.
1666
1667 Tue Mar  5 15:51:57 1996  Ian Lance Taylor  <ian@cygnus.com>
1668
1669         * configure.in: Don't set SHLIB or SHLINK to an empty string,
1670         since they appear as targets in Makefile.in.
1671         * configure: Rebuild.
1672
1673 Mon Feb 26 13:03:40 1996  Stan Shebs  <shebs@andros.cygnus.com>
1674
1675         * mpw-make.sed: Edit out shared library support bits.
1676
1677 Tue Feb 20 20:48:28 1996  Doug Evans  <dje@charmed.cygnus.com>
1678
1679         * sparc-opc.c (v8,v6notv9): Add MASK_SPARCLET.
1680         (sparc_opcode_archs): Add MASK_V8 to sparclet entry.
1681         (sparc_opcodes): Add sparclet insns.
1682         (sparclet_cpreg_table): New static local.
1683         (sparc_{encode,decode}_sparclet_cpreg): New functions.
1684         * sparc-dis.c (print_insn_sparc): Handle sparclet cpregs.
1685
1686 Tue Feb 20 11:02:44 1996  Alan Modra  <alan@mullet.Levels.UniSA.Edu.Au>
1687
1688         * i386-dis.c (index16): New static variable.
1689         (putop): Print jecxz for 32 bit case, jcxz for 16 bit, not the
1690         other way around.
1691         (OP_indirE): Return result of OP_E.
1692         (OP_E): Check for 16 bit addressing mode, and disassemble
1693         correctly.  Optimised 32 bit case a little.  Don't print
1694         "(base,index,scale)" when sib specifies only an offset.
1695
1696 Mon Feb 19 12:32:17 1996  Ian Lance Taylor  <ian@cygnus.com>
1697
1698         * configure.in: Set and substitute SHLIB_DEP.
1699         * configure: Rebuild.
1700         * Makefile.in (SHLIB_DEP): New variable.
1701         (LIBIBERTY_LISTS, BFD_LIST): New variables.
1702         (stamp-piclist): Depend upon LIBIBERTY_LISTS and BFD_LIST.  If
1703         COMMON_SHLIB, add them to piclist with appropriate modifications.
1704         ($(SHLIB)): Depend upon $(SHLIB_DEP).  Don't check COMMON_SHLIB
1705         here: just use piclist.
1706
1707 Mon Feb 19 02:03:50 1996  Doug Evans  <dje@charmed.cygnus.com>
1708
1709         * sparc-dis.c (MASK_V9,V9_ONLY_P,V9_P): Define.
1710         (print_insn_sparc): Rewrite v9/not-v9 tests.
1711         (compare_opcodes): Likewise.
1712         * sparc-opc.c (MASK_<ARCH>): Define.
1713         (v6,v7,v8,sparclite,v9,v9a): Redefine.
1714         (sparclet,v6notv9): Define.
1715         (sparc_opcode_archs): Delete member `conflicts'.  Add `supported'.
1716         (sparc_opcodes): Delete F_NOTV9, use v6notv9 instead.
1717
1718 Thu Feb 15 14:45:05 1996  Ian Lance Taylor  <ian@cygnus.com>
1719
1720         * configure.in: Call AC_PROG_CC before configure.host.
1721         * configure: Rebuild.
1722
1723         * Makefile.in (SONAME): Remove leading ../bfd/ from $(SHLIB).
1724
1725 Wed Feb 14 19:01:27 1996  Alan Modra  <alan@spri.levels.unisa.edu.au>
1726
1727         * i386-dis.c (onebyte_has_modrm): New static array.
1728         (twobyte_has_modrm): New static array.
1729         (print_insn_i386): Only fetch the mod/reg/rm byte if it is needed.
1730
1731 Tue Feb 13 15:15:01 1996  Ian Lance Taylor  <ian@cygnus.com>
1732
1733         * Makefile.in ($(SHLINK)): Check ts against $(SHLIB), not
1734         $(SHLINK).
1735
1736 Mon Feb 12 16:26:06 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
1737
1738         * ppc-opc.c (PPC): Undef, so default defination on Windows NT
1739         doesn't conflict.
1740
1741 Wed Feb  7 13:59:54 1996  Ian Lance Taylor  <ian@cygnus.com>
1742
1743         * m68k-opc.c (m68k_opcodes): The bkpt instruction is supported on
1744         m68010up, not just m68020up | cpu32.
1745
1746         * Makefile.in (SONAME): New variable.
1747         ($(SHLINK)): Make a link to the transformed name, as well.
1748         (stamp-tshlink): New target.
1749         (install): Skip stamp-tshlink during install.
1750
1751 Tue Feb  6 12:28:54 1996  Ian Lance Taylor  <ian@cygnus.com>
1752
1753         * configure.in: Call AC_ARG_PROGRAM.
1754         * configure: Rebuild.
1755         * Makefile.in (program_transform_name): New variable.
1756         (install): Transform library name before installing it.
1757
1758 Mon Feb  5 16:14:42 1996  Ian Lance Taylor  <ian@cygnus.com>
1759
1760         * i960-dis.c (mem): Add HX dcinva instruction.
1761
1762         Support for building as a shared library, based on patches from
1763         Alan Modra <alan@spri.levels.unisa.edu.au>:
1764         * configure.in: Add AC_ARG_ENABLE for shared and commonbfdlib.
1765         New substitutions: ALLLIBS, PICFLAG, SHLIB, SHLIB_CC,
1766         SHLIB_CFLAGS, COMMON_SHLIB, SHLINK.
1767         * configure: Rebuild.
1768         * Makefile.in (ALLLIBS): New variable.
1769         (PICFLAG, SHLIB, SHLIB_CC, SHLIB_CFLAGS): New variables.
1770         (COMMON_SHLIB, SHLINK): New variables.
1771         (.c.o): If PICFLAG is set, compile twice, once PIC, once normal.
1772         (STAGESTUFF): Remove variable.
1773         (all): Depend upon $(ALLLIBS) rather than $(TARGETLIB).
1774         (stamp-piclist, piclist): New targets.
1775         ($(SHLIB), $(SHLINK)): New targets.
1776         ($(OFILES)): Depend upon stamp-picdir.
1777         (disassemble.o): Build twice if PICFLAG is set.
1778         (MOSTLYCLEAN): Add pic/*.o.
1779         (clean): Remove $(SHLIB), $(SHLINK), piclist, and stamp-piclist.
1780         (distclean): Remove pic and stamp-picdir.
1781         (install): Install shared libraries.
1782         (stamp-picdir): New target.
1783
1784 Fri Feb  2 17:15:25 1996  Doug Evans  <dje@charmed.cygnus.com>
1785
1786         * sparc-dis.c (print_insn_sparc): Delete DISASM_RAW_INSN support.
1787         Print unknown instruction as "unknown", rather than in hex.
1788
1789 Tue Jan 30 14:06:08 1996  Ian Lance Taylor  <ian@cygnus.com>
1790
1791         * dis-buf.c: Include "sysdep.h" before "dis-asm.h".
1792
1793 Thu Jan 25 20:24:07 1996  Doug Evans  <dje@charmed.cygnus.com>
1794
1795         * sparc-opc.c (sparc_opcode_archs): Mark v8/sparclite as conflicting.
1796
1797 Thu Jan 25 11:56:49 1996  Ian Lance Taylor  <ian@cygnus.com>
1798
1799         * i386-dis.c (print_insn_i386): Only fetch the mod/reg/rm byte
1800         when necessary.  From Ulrich Drepper
1801         <drepper@myware.rz.uni-karlsruhe.de>.
1802
1803 Thu Jan 25 03:39:10 1996  Doug Evans  <dje@charmed.cygnus.com>
1804
1805         * sparc-dis.c (print_insn_sparc): NUMOPCODES replaced with
1806         sparc_num_opcodes.  Update architecture enum values.
1807         * sparc-opc.c (sparc_opcode_archs): Replaces architecture_pname.
1808         (sparc_opcode_lookup_arch): New function.
1809         (sparc_num_opcodes): Renamed from bfd_sparc_num_opcodes.
1810         (sparc_opcodes): Add v9a shutdown insn.
1811
1812 Mon Jan 22 08:29:59 1996  Doug Evans  <dje@charmed.cygnus.com>
1813
1814         * sparc-dis.c (print_insn_sparc): Renamed from print_insn.
1815         If DISASM_RAW_INSN, print insn in hex.  Handle v9a as opcode
1816         architecture.
1817         (print_insn_sparc64): Deleted.
1818         * disassemble.c (disassembler, case bfd_arch_sparc): Always use
1819         print_insn_sparc.
1820
1821         * sparc-opc.c (architecture_pname): Add v9a.
1822
1823 Fri Jan 12 14:35:58 1996  David Mosberger-Tang  <davidm@AZStarNet.com>
1824
1825         * alpha-opc.h (alpha_insn_set): VAX floating point opcode was
1826         incorrectly defined as 0x16 when it should be 0x15.
1827         (FLOAT_FORMAT_MASK): function code is 11 bits, not just 7 bits!
1828         (alpha_insn_set): added cvtst and cvttq float ops.  Also added
1829         excb (exception barrier) which is defined in the Alpha
1830         Architecture Handbook version 2.
1831         * alpha-dis.c (print_insn_alpha): Fixed special-case decoding for
1832         OPERATE_FORMAT_CODE type instructions.  The bug caused mulq to be
1833         disassembled as or, for example.
1834
1835 Wed Jan 10 12:37:22 1996  Ian Lance Taylor  <ian@cygnus.com>
1836
1837         * mips-dis.c (print_insn_arg): Print cases 'i' and 'u' in hex.
1838         (_print_insn_mips): Change i from int to unsigned int.
1839
1840 Thu Jan  4 17:21:10 1996  David Edelsohn  <edelsohn@mhpcc.edu>
1841
1842         * ppc-opc.c (powerpc_opcodes): tlbi POWER opcode form different
1843         from tlbie PowerPC opcode.  Add PPC603 tlbld and tlbli.
1844
1845 Thu Dec 28 13:29:19 1995  John Hassey  <hassey@rtp.dg.com>
1846
1847         * i386-dis.c: Added Pentium Pro instructions.
1848
1849 Tue Dec 19 22:56:35 1995  Michael Meissner  <meissner@tiktok.cygnus.com>
1850
1851         * ppc-opc.c (fsqrt{,.}): Duplicate for PowerPC in addition to
1852         being for Power2.
1853
1854 Fri Dec 15 14:14:15 1995  J.T. Conklin  <jtc@rtl.cygnus.com>
1855
1856         * sh-opc.h (sh_nibble_type): Added REG_B.
1857         (sh_arg_type): Added A_REG_B.
1858         (sh_table): Added pref and bank reg versions of ldc, ldc.l, stc
1859         and stc.l opcodes.
1860         * sh-dis.c (print_insn_shx): Added cases for REG_B and A_REG_B.
1861
1862 Fri Dec 15 16:44:31 1995  Ian Lance Taylor  <ian@cygnus.com>
1863
1864         * disassemble.c (disassembler): Use new bfd_big_endian macro.
1865
1866 Tue Dec 12 12:22:24 1995  Ian Lance Taylor  <ian@cygnus.com>
1867
1868         * Makefile.in (distclean): Remove stamp-h.  From Ronald
1869         F. Guilmette <rfg@monkeys.com>.
1870
1871 Tue Dec  5 13:42:44 1995  Stan Shebs  <shebs@andros.cygnus.com>
1872
1873         From David Mosberger-Tang  <davidm@azstarnet.com>:
1874         * alpha-dis.c (print_insn_alpha): fixed decoding of cpys
1875         instruction.
1876
1877 Mon Dec  4 12:29:05 1995  J.T. Conklin  <jtc@rtl.cygnus.com>
1878
1879         * sh-opc.h (sh_arg_type): Added A_SSR and A_SPC.
1880         (sh_table): Added many SH3 opcodes.
1881         * sh-dis.c (print_insn_shx): Added cases for A_SSR and A_SPC.
1882
1883 Fri Dec  1 07:42:18 1995  Michael Meissner  <meissner@tiktok.cygnus.com>
1884
1885         * ppc-opc.c (subfc., subfco): Mark this PPCCOM, not PPC.
1886         (subco,subco.): Mark this PPC, not PPCCOM.
1887
1888 Mon Nov 27 13:09:52 1995  Ian Lance Taylor  <ian@cygnus.com>
1889
1890         * configure: Rebuild with autoconf 2.7.
1891
1892 Tue Nov 21 18:28:06 1995  Ian Lance Taylor  <ian@cygnus.com>
1893
1894         * configure: Rebuild with autoconf 2.6.
1895
1896 Wed Nov 15 19:02:53 1995  Ken Raeburn  <raeburn@cygnus.com>
1897
1898         * configure.in: Sort list of architectures.  Accept but do nothing
1899         for alliant, convex, pyramid, romp, and tahoe.
1900
1901 Wed Nov  8 20:18:59 1995  Ian Lance Taylor  <ian@cygnus.com>
1902
1903         * a29k-dis.c (print_special): Change num to unsigned int.
1904
1905 Wed Nov  8 20:10:35 1995  Eric Freudenthal <freudenthal@nyu.edu>
1906
1907         * a29k-dis.c (print_insn): Cast insn24 to unsigned long when
1908         shifting it.
1909
1910 Tue Nov  7 15:21:06 1995  Ian Lance Taylor  <ian@cygnus.com>
1911
1912         * configure.in: Call AC_CHECK_PROG to find and cache AR.
1913         * configure: Rebuilt.
1914
1915 Mon Nov  6 17:39:47 1995  Harry Dolan  <dolan@ssd.intel.com>
1916
1917         * configure.in: Add case for bfd_i860_arch.
1918         * configure: Rebuild.
1919
1920 Fri Nov  3 12:45:31 1995  Ian Lance Taylor  <ian@cygnus.com>
1921
1922         * m68k-opc.c (m68k_opcodes): Correct fmoveml operands.
1923         * m68k-dis.c (NEXTSINGLE): Change i to unsigned int.
1924         (NEXTDOUBLE): Likewise.
1925         (print_insn_m68k): Don't match fmoveml if there is more than one
1926         register in the list.
1927         (print_insn_arg): Handle a place of '8' for a type of 'L'.
1928
1929 Thu Nov  2 23:06:33 1995  Ian Lance Taylor  <ian@cygnus.com>
1930
1931         * m68k-opc.c: Use #W rather than #w.
1932         * m68k-dis.c (print_insn_arg): Handle new 'W' place.
1933
1934 Wed Nov  1 13:30:24 1995  Ian Lance Taylor  <ian@cygnus.com>
1935
1936         * m68k-opc.c (m68k_opcode_aliases): Add dbfw as an alias for dbf,
1937         and likewise for all the dbxx opcodes.
1938
1939 Mon Oct 30 20:50:40 1995  Fred Fish  <fnf@cygnus.com>
1940
1941         * arc-dis.c: Include elf-bfd.h rather than libelf.h.
1942
1943 Mon Oct 23 11:11:34 1995  James G. Smith  <jsmith@pasanda.cygnus.co.uk>
1944
1945         * mips-opc.c: Added shorthand (V1) for INSN_4100 manifest. Added
1946         the VR4100 specific instructions to the mips_opcodes structure.
1947
1948 Thu Oct 19 11:05:23 1995  Stan Shebs  <shebs@andros.cygnus.com>
1949
1950         * mpw-config.in, mpw-make.sed: Remove ugly workaround for
1951         ugly Metrowerks bug in CW6, is fixed in CW7.
1952
1953 Mon Oct 16 12:59:01 1995  Michael Meissner  <meissner@tiktok.cygnus.com>
1954
1955         * ppc-opc.c (whole file): Add flags for common/any support.
1956
1957 Tue Oct 10 11:06:07 1995  Fred Fish  <fnf@cygnus.com>
1958
1959         * Makefile.in (BISON): Remove macro.
1960         (FLAGS_TO_PASS): Remove BISON.
1961
1962 Fri Oct  6 16:26:45 1995  Ken Raeburn  <raeburn@cygnus.com>
1963
1964         Mon Sep 25 22:49:32 1995  Andreas Schwab  <schwab@issan.informatik.uni-dortmund.de>
1965
1966         * m68k-dis.c (print_insn_m68k): Recognize all two-word
1967         instructions that take no args by looking at the match mask.
1968         (print_insn_arg): Always print "%" before register names.
1969         [case 'c']: Use "nc" for the no-cache case, as recognized by gas.
1970         [case '_']: Don't print "@#" before address.
1971         [case 'J']: Use "%s" as format string, not register name.
1972         [case 'B']: Treat place == 'C' like 'l' and 'L'.
1973
1974 Thu Oct  5 22:16:20 1995  Ken Raeburn  <raeburn@cygnus.com>
1975
1976         * i386-dis.c: Describe cmpxchg8b operand, and spell the opcode
1977         name correctly.
1978
1979 Tue Oct  3 08:30:20 1995  steve chamberlain  <sac@slash.cygnus.com>
1980
1981         From David Mosberger-Tang  <davidm@azstarnet.com>
1982
1983         * alpha-opc.h (MEMORY_FUNCTION_FORMAT_MASK): added.
1984         (alpha_insn_set): added definitions for VAX floating point
1985         instructions (Unix compilers don't generate these, but handcoded
1986         assembly might still use them).
1987
1988         * alpha-dis.c (print_insn_alpha): added support for disassembling
1989         the miscellaneous instructions in the Alpha instruction set.
1990
1991 Tue Sep 26 18:47:20 1995  Stan Shebs  <shebs@andros.cygnus.com>
1992
1993         * mpw-config.in: Add m68k-opc.c.o to BFD_MACHINES for m68k,
1994         no longer create sysdep.h, sed ppc-opc.c to work around a
1995         serious Metrowerks C bug.
1996         * mpw-make.in: Remove.
1997         * mpw-make.sed: New file, used by mpw-configure to edit
1998         Makefile.in into an MPW makefile.
1999
2000 Wed Sep 20 12:55:28 1995  Ian Lance Taylor  <ian@cygnus.com>
2001
2002         * Makefile.in (maintainer-clean): New synonym for realclean.
2003
2004 Tue Sep 19 15:28:36 1995  Ian Lance Taylor  <ian@cygnus.com>
2005
2006         * m68k-opc.c: Split pmove patterns which use 'P' into patterns
2007         which use '0', '1', and '2' instead.  Specify the proper size for
2008         a pmove immediate operand.  Correct the pmovefd patterns to be
2009         moves to a register, not from a register.
2010         * m68k-dis.c (print_insn_arg): Replace 'P' with '0', '1', '2'.
2011
2012 Thu Sep 14 11:58:22 1995  Doug Evans  <dje@canuck.cygnus.com>
2013
2014         * sparc-opc.c (sparc_opcodes): Mark all insns that reference
2015         %psr, %wim, %tbr as F_NOTV9.
2016
2017 Fri Sep  8 01:07:38 1995  Ian Lance Taylor  <ian@cygnus.com>
2018
2019         * Makefile.in (Makefile): Just rebuild Makefile when running
2020         config.status.
2021         (config.h, stamp-h): New targets.
2022         * configure.in: Call AC_CONFIG_HEADER and AC_CANONICAL_SYSTEM
2023         earlier.  Don't bother to call AC_ARG_PROGRAM.  Touch stamp-h when
2024         rebuilding config.h.
2025         * configure: Rebuild.
2026
2027         * mips-opc.c: Change unaligned loads and stores with "t,A"
2028         operands to use "t,A(b)".
2029
2030 Thu Sep  7 19:02:46 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
2031
2032         * sh-dis.c (print_insn_shx): Add F_FR0 support.
2033
2034 Thu Sep  7 19:02:46 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
2035
2036         * sh-dis.c (print_insn_shx): Change loop over op->arg[n] to iterate
2037         until 3 instead of until 2.
2038
2039 Wed Sep  6 21:21:33 1995  Ian Lance Taylor  <ian@cygnus.com>
2040
2041         * Makefile.in (ALL_CFLAGS): Define.
2042         (.c.o, disassemble.o): Use $(ALL_CFLAGS).
2043         (MOSTLYCLEAN): Add config.log.
2044         (distclean): Don't remove config.log.
2045         * configure.in: Substitute HDEFINES.
2046         * configure: Rebuild.
2047
2048 Wed Sep  6 15:08:09 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
2049
2050         * sh-opc.h (sh_arg_type): Add F_FR0.
2051         (sh_table, case fmac): Add F_FR0 as first argument.
2052
2053 Wed Sep  6 15:08:09 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
2054
2055         * sh-opc.h (sh_opcode_info): Increase arg array size to 4.
2056
2057 Tue Sep  5 18:28:10 1995  Doug Evans  <dje@canuck.cygnus.com>
2058
2059         * sparc-dis.c: Remove all references to NO_V9.
2060
2061 Tue Sep  5 20:03:26 1995  Ian Lance Taylor  <ian@cygnus.com>
2062
2063         * aclocal.m4: Just include ../bfd/aclocal.m4.
2064         * configure: Rebuild.
2065
2066 Tue Sep  5 16:09:59 1995  Doug Evans  <dje@canuck.cygnus.com>
2067
2068         * sparc-dis.c (X_DISP19): Define.
2069         (print_insn, case 'G'): Use it.
2070         (print_insn, case 'L'): Sign extend displacement.
2071
2072 Mon Sep  4 14:28:46 1995  Ian Lance Taylor  <ian@cygnus.com>
2073
2074         * configure.in: Run ../bfd/configure.host before AC_PROG_CC.
2075         Subsitute CFLAGS and AR.  Call AC_PROG_INSTALL.  Don't substitute
2076         host_makefile_frag or frags.
2077         * aclocal.m4: New file.
2078         * configure: Rebuild.
2079         * Makefile.in (INSTALL): Set to @INSTALL@.
2080         (INSTALL_PROGRAM): Set to @INSTALL_PROGRAM@.
2081         (INSTALL_DATA): Set to @INSTALL_DATA@.
2082         (AR): Set to @AR@.
2083         (AR_FLAGS): Set to rc rather than qc.
2084         (CC): Define as @CC@.
2085         (CFLAGS): Set to @CFLAGS@.
2086         (@host_makefile_frag@): Remove.
2087         (config.status): Remove dependency upon @frags@.
2088
2089         * configure.in: ../bfd/config.bfd now just sets shell variables.
2090         Use them rather than looking through target Makefile fragments.
2091         * configure: Rebuild.
2092
2093 Thu Aug 31 12:35:32 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
2094
2095         * sh-opc.h (ftrc): Change FPUL_N to FPUL_M.
2096
2097 Wed Aug 30 13:52:28 1995  Doug Evans  <dje@canuck.cygnus.com>
2098
2099         * sparc-opc.c (sparc_opcodes): Delete duplicate wr %y insn.
2100         Add clrx, iprefetch, signx, clruw, cas, casl, casx, casxl synthetic
2101         sparc64 insns.
2102
2103         * sparc-opc.c (sparc_opcodes): Fix prefetcha insn.
2104         (lookup_{name,value}): New functions.
2105         (prefetch_table): New static local.
2106         (sparc_{encode,decode}_prefetch): New functions.
2107         * sparc-dis.c (print_insn): Handle '*' arg (prefetch function).
2108
2109 Wed Aug 30 11:11:58 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
2110
2111         * sh-opc.h: Add blank lines to improve readabililty of sh3e
2112         instructions.
2113
2114 Wed Aug 30 11:09:38 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
2115
2116         * sh-dis.c: Correct comment on first line of file.
2117
2118 Tue Aug 29 15:37:18 1995  Doug Evans  <dje@canuck.cygnus.com>
2119
2120         * disassemble.c (disassembler): Handle bfd_mach_sparc64.
2121
2122         * sparc-opc.c (asi, membar): New static locals.
2123         (sparc_{encode,decode}_{asi,membar}): New functions.
2124         (sparc_opcodes, membar insn): Fix.
2125         * sparc-dis.c (print_insn): Call sparc_decode_asi.
2126         Support decoding of membar masks.
2127         (X_MEMBAR): Define.
2128
2129 Sat Aug 26 21:22:48 1995  Ian Lance Taylor  <ian@cygnus.com>
2130
2131         * m68k-opc.c (m68k_opcode_aliases): Add br, brs, brb, brw, brl.
2132
2133 Mon Aug 21 17:33:36 1995  Ian Lance Taylor  <ian@cygnus.com>
2134
2135         * m68k-opc.c (m68k_opcode_aliases): Add bhib as an alias for bhis,
2136         and likewise for the other branches.  Add bhs as an alias for bcc,
2137         and likewise for the size variants.  Add dbhs as an alias for
2138         dbcc.
2139
2140 Fri Aug 11 13:40:24 1995  Jeff Law  (law@snake.cs.utah.edu)
2141
2142         * sh-opc.h (FP sts instructions): Update to match reality.
2143
2144 Mon Aug  7 16:12:58 1995  Ian Lance Taylor  <ian@cygnus.com>
2145
2146         * m68k-dis.c: (fpcr_names): Add % before all register names.
2147         (reg_names): Likewise.
2148         (print_insn_arg): Don't explicitly print % before register names.
2149         Add % before register names in static array names.  In case 'r',
2150         print data registers as `@(Dn)', not `Dn@'.  When printing a
2151         memory address, don't print @# before it.
2152         (print_indexed): Change base_disp and outer_disp from int to
2153         bfd_vma.  Print using MIT syntax, not mutant invalid Motorola
2154         syntax.  Sign extend 8 byte displacement correctly.
2155         (print_base): Print using MIT syntax.  Print zpc when appropriate.
2156         Change parameter disp from int to bfd_vma.
2157
2158         * m68k-opc.c (m68k_opcode_aliases): Add jsrl and jsrs as aliases
2159         for jsr.
2160
2161 Mon Aug  7 02:21:40 1995  Jeff Law  (law@snake.cs.utah.edu)
2162
2163         * sh-dis.c (print_insn_shx): Handle new operand types F_REG_N,
2164         F_REG_M, FPSCR_M, FPSCR_N, FPUL_M and FPUL_N.
2165         * sh-opc.h (sh_arg_type): Add new operand types.
2166         (sh_table): Add new opcodes from SH3E Floating Point ISA.
2167
2168 Sat Aug  5 16:50:14 1995  Fred Fish  <fnf@cygnus.com>
2169
2170         * Makefile.in (distclean): Remove generated file config.h.
2171
2172 Sat Aug  5 16:50:14 1995  Fred Fish  <fnf@cygnus.com>
2173
2174         * Makefile.in (distclean): Remove generated file config.h.
2175
2176 Wed Aug  2 18:33:40 1995  Ian Lance Taylor  <ian@cygnus.com>
2177
2178         * m68k-opc.c: New file, holding tables from include/opcode/m68k.h.
2179         Clean up tables.
2180         * m68k-dis.c: Remove BREAK_UP_BIG_DECL stuff.
2181         (opcode): Remove.
2182         (print_insn_m68k): Change d to be const.  Use m68k_numopcodes
2183         rather than numopcodes.  Use m68k_opcodes rather than removed
2184         opcode function.  Don't check F_ALIAS.
2185         (print_insn_arg): Change first parameter to be const char *.
2186         * Makefile.in (ALL_MACHINES): Add m68k-opc.o.
2187         (m68k-opc.o): New target.
2188         * configure.in: Build m68k-opc.o for bfd_m68k_arch.
2189         * configure: Rebuild.
2190
2191 Wed Aug  2 08:23:38 1995  Doug Evans  <dje@canuck.cygnus.com>
2192
2193         * sparc-dis.c (HASH_SIZE, HASH_INSN): Define.
2194         (opcode_bits, opcode_hash_table): New variables.
2195         (opcodes_initialized): Renamed from opcodes_sorted.
2196         (build_hash_table): New function.
2197         (is_delayed_branch): Use hash table.
2198         (print_insn): Renamed from print_insn_sparc, made static.
2199         Build and use hash table.  If !sparc64, ignore sparc64 insns,
2200         and vice-versa if sparc64.
2201         (print_insn_sparc, print_insn_sparc64): New functions.
2202         (compare_opcodes): Move sparc64 opcodes to end.
2203         Print commutative insns with constant second.
2204         * sparc-opc.c (all non-v9 insns): Use flag F_NOTV9 instead of F_ALIAS.
2205
2206 Tue Aug  1 00:12:49 1995  Ian Lance Taylor  <ian@cygnus.com>
2207
2208         * sh-dis.c (print_insn_shx): Remove unused local dslot.  Use
2209         print_address_func for A_BDISP12 and A_BDISP8.  Correct test which
2210         avoids printing a delay slot in a delay slot.
2211         * sh-opc.h (sh_table): Fully bracket last entry.
2212
2213 Mon Jul 31 12:04:47 1995  Doug Evans  <dje@canuck.cygnus.com>
2214
2215         * sparc-opc.c (sllx, srax, srlx): Fix disassembly.
2216
2217 Wed Jul 12 00:59:34 1995  Ken Raeburn  <raeburn@kr-pc.cygnus.com>
2218
2219         * configure.in: Get host_makefile_frag from ${srcdir}.
2220
2221         * configure.in: Autoconfiscated.  Check for string[s].h.  Create
2222         config.h from config.in.  Don't set up sysdep.h link.
2223         * sysdep.h: New file.
2224         * configure, config.in: New files, generated from configure.in.
2225         * Makefile.in: Updated to be processed autoconf-style.
2226         (distclean): Keep sysdep.h.  Remove config.log and config.cache.
2227         (Makefile): Depend on config.status.
2228         (config.status): New rule.
2229         * configure.bat: Update Makefile substitutions.
2230
2231 Tue Jul 11 14:23:37 1995  Jeff Spiegel  <jeffs@lsil.com>
2232
2233         * mips-opc.c (L1): Define.
2234         (mips_opcodes): Add R4010 instructions: flushi, flushd, flushid,
2235         addciu, madd, maddu, ffc, ffs, msub, msubu, selsi, selsr, waiti,
2236         and wb.
2237
2238 Tue Jul 11 11:49:49 1995  Ian Lance Taylor  <ian@cygnus.com>
2239
2240         * mips-opc.c (mips_opcodes): For the move pseudo-op, prefer daddu
2241         if ISA 3 and addu otherwise, replacing or, since some MIPS chips
2242         have multiple add units but only a single logical unit.
2243
2244         * ppc-opc.c (powerpc_operands): Change CR to use a bitsize of 3,
2245         shifted by 18, without any insertion or extraction function.
2246         (insert_cr, extract_cr): Remove.
2247
2248 start-sanitize-arc
2249 Mon Jul  3 11:54:31 1995  Ian Lance Taylor  <ian@cygnus.com>
2250
2251         * Makefile.in (ALL_MACHINES): Add arc-dis.o and arc-opc.o.
2252
2253 end-sanitize-arc
2254 Wed Jun 21 20:05:39 1995  Ken Raeburn  <raeburn@cujo.cygnus.com>
2255
2256         * m68k-dis.c (print_insn_arg, print_indexed): Print "%" before
2257         register names.
2258
2259 Thu Jun 15 17:23:31 1995  Stan Shebs  <shebs@andros.cygnus.com>
2260
2261         * mpw-config.in: Add sh and i386 configs, remove sparc config.
2262         * sh-opc.h: Add copyright.
2263
2264 Mon Jun  5 03:30:43 1995  Ken Raeburn  <raeburn@kr-laptop.cygnus.com>
2265
2266         * Makefile.in (crunch-m68k): Delete extra target accidentally
2267         checked in a while ago.
2268
2269 Wed May 24 16:22:13 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
2270
2271         * sh-opc.h (sh_table): Add SH3 support.
2272
2273 Wed May 24 14:16:08 1995  Steve Chamberlain  <sac@slash.cygnus.com>
2274
2275         * sh-opc.h: Added bsrf and braf.
2276
2277 Wed May 10 14:28:16 1995 Richard Earnshaw (rearnsha@armltd.co.uk)
2278
2279         * arm-opc.h (arm_opcodes): Add 64-bit multiply patterns.  Delete
2280         bogus [ls]fm{ea,fd} patterns.
2281
2282         * arm-opc.h (arm_opcodes): Correct typos in stm, ldm, std, and ldc.
2283         * arm-dis.c (print_insn_arm): Make GIVEN a parameter, don't try and
2284         initialize it from memory.  Make function static.
2285         (print_insn_{big,little}_arm): New functions.
2286         * disassemble.c (disassembler, case bfd_arch_arm): Disassemble for
2287         the correct endianness.
2288
2289 start-sanitize-arc
2290 Sat Apr 29 23:20:05 1995  Doug Evans  <dje@chestnut.cygnus.com>
2291
2292         * arc-opc.c (arc_opcodes): Add ARC_OPCODE_CONDITIONAL_BRANCH flag.
2293         (arc_suffixes): Use ARC_DELAY_{NONE,NORMAL,JUMP}.
2294 end-sanitize-arc
2295
2296 Mon Apr 24 14:18:05 1995  Jason Molenda   (crash@phydeaux.cygnus.com>
2297
2298         * sh-opc.h (sh_nibble_type, sh_arg_type): remove trailing , from
2299         enum list.
2300
2301 Wed Apr 19 14:07:03 1995  Michael Meissner  <meissner@tiktok.cygnus.com>
2302
2303         * m68k-dis.c (opcode): Finish change made by Kung Hsu on April
2304         17th, so that it builds again using GCC as the compiler.
2305
2306 Tue Apr 18 12:14:51 1995  Ken Raeburn  <raeburn@cujo.cygnus.com>
2307
2308         * mips-dis.c (print_insn_little_mips): Cast return value from
2309         bfd_getl32 from bfd_vma to unsigned long, because _print_insn_mips
2310         expects an unsigned long, and that might be fewer words of
2311         argument storage (e.g., if bfd_vma is long long on a 32-bit
2312         machine).
2313         (print_insn_big_mips): Likewise with bfd_getb32 value.
2314         (_print_insn_mips): Now static.
2315
2316 Mon Apr 17 12:23:28 1995  Kung Hsu  <kung@rtl.cygnus.com>
2317
2318         * m68k-dis.c: Take out #define BREAK_UP_BIG_DECL kludge, because
2319         gcc memory hog problem with initializer is fixed.
2320
2321 start-sanitize-arc
2322 Wed Apr 12 09:04:12 1995  Doug Evans  <dje@canuck.cygnus.com>
2323
2324         * arc-opc.c (NULL): Define.
2325         (arc_operands, insn fields u,s): Delete.
2326         (arc_operands, insn fields a,b,c): Mark as signed.
2327         (arc_opcodes): No longer const, links computed at run-time.
2328         (arc_opcodes, mac/mul insns): Breakout suffixes as we don't handle
2329         suffixes that affect the insn code.
2330         (arc_opcodes): Resort table to macros are first.
2331         (arc_opcodes, ld [b,c] entry): Add %Q to prevent shimms.
2332         (arc_opcodes, st [b] entry): Likewise.
2333         (arc_opcodes, st [b,d] entry): Fix mask, value.
2334         (arc_reg_names): Add entries for r29, r30, r31, r60.
2335         (opcode_map, icode_map): New static globals.
2336         (arc_opcode_init_tables): Initialize them.
2337         (arc_opcode_lookup_asm, arc_opcode_lookup_dis): New functions.
2338         (insert_shimmoffset): Signal error if register present.
2339         Validate constant.
2340         * arc-dis.c (print_insn): Call arc_opcode_lookup_dis.
2341 end-sanitize-arc
2342
2343 Mon Apr 10 15:55:01 1995  Stan Shebs  <shebs@andros.cygnus.com>
2344
2345         Merge in support for Mac MPW as a host.
2346         (Old change descriptions retained for informational value.)
2347
2348         * mpw-config.in (archname): Compute from the config.
2349         (BFD_MACHINES, ARCHDEFS): Put into mk.tmp.
2350
2351         * mpw-config.in (target_arch): Compute from canonical target.
2352         (m68k, mips, powerpc, sparc): Add architectures.
2353         * mpw-make.in (disassemble.c.o): Add.
2354         (ALL_CFLAGS): Remove special flags (-mc68020 -mc68881 -model far).
2355
2356         * mpw-config.in (BFD_MACHINES): Set to a default value.
2357         * mpw-make.in (BFD_MACHINES): Remove wired-in value.
2358
2359         * mpw-make.in (CSEARCH): Add extra-include to search path.
2360
2361         * mpw-config.in (varargs.h): Don't create.
2362         (sysdep.h): Create using forward-include.
2363         * mpw-make.in (CSEARCH): Add include/mpw to search path.
2364
2365         * mpw-config.in: New file, MPW version of configure.in.
2366         * mpw-make.in: New file, MPW version of Makefile.in.
2367
2368 start-sanitize-arc
2369 Thu Apr  6 20:36:08 1995  Doug Evans  <dje@chestnut.cygnus.com>
2370
2371         * arc-dis.c (print_insn): New parameter `big_p'.  Callers updated.
2372         Call arc_get_opcode_mach to map bfd mach number to opcode value.
2373         (print_insn_*): Pass bfd mach number, not opcode version.
2374         * arc-opc.c (arc_get_opcode_mach): New function.
2375 end-sanitize-arc
2376
2377 Fri Mar 31 14:23:38 1995  Ken Raeburn  <raeburn@cujo.cygnus.com>
2378
2379         * alpha-dis.c (print_insn_alpha): Put empty statement after
2380         default label.
2381
2382 Tue Mar 21 10:51:40 1995  Jeff Law  (law@snake.cs.utah.edu)
2383
2384         * hppa-dis.c (sign_extend): Delete, redundant with libhppa.h version.
2385         (low_sign_extend): Likewise.
2386         (get_field): Delete unused function.
2387         (set_field, deposit_14, deposit_21): Likewise.
2388
2389 Fri Mar 17 15:55:53 1995  J.T. Conklin  <jtc@rtl.cygnus.com>
2390
2391         * i386-dis.c: Support for more pentium opcodes.  From Guy Harris
2392           (guy@netapp.com).
2393
2394 Tue Mar 14 00:52:57 1995  Ken Raeburn  (raeburn@kr-pc.cygnus.com)
2395
2396         Sat Feb 11 17:22:41 1995  Klaus Kaempf  (kkaempf@didymus.rmi.de)
2397
2398         * alpha-opc.h (OSF_ASMCODE): define
2399         print pal-code names as defined in App C of the
2400         Alpha Architecture Reference Manual
2401
2402         * alpha-dis.c: cleaned up output
2403         print stylized code forms as defined in App A.4.3 of the
2404         Alpha Architecture Reference Manual
2405
2406 Wed Mar  8 15:21:14 1995  Ian Lance Taylor  <ian@cygnus.com>
2407
2408         * mips-opc.c: Add new mips4 instructions.  Don't set INSN_RFE for
2409         `rfe'.
2410         * mips-dis.c (print_insn_arg): Handle new argument types 'h', 'R',
2411         'N', and 'M'.
2412
2413 Wed Mar  8 02:54:05 1995  Ken Raeburn  <raeburn@cujo.cygnus.com>
2414
2415         * m68k-dis.c (opcode): New function.  Returns address of opcode
2416         table entry given index, even if the opcode table was split to
2417         work around gcc bugs.
2418         (print_insn_m68k): Call opcode instead of referencing m68k_opcodes
2419         directly.
2420         (BREAK_UP_BIG_DECL): Make secondary array static and const.
2421         (reg_names): Now const.
2422         (print_insn_arg): Arrays cacheFieldName and names now const.
2423         (print_indexed): Array scales now const.
2424
2425 start-sanitize-arc
2426 Tue Mar  7 21:14:14 1995  Doug Evans  <dje@chestnut.cygnus.com>
2427
2428         * arc-dis.c (print_insn_arc_base): Split into big and little fns.
2429         (print_insn_arc_{host,graphics,audio}): Likewise.
2430         (print_insn): Add prototype.
2431         (arc_get_disassembler): New arg `big_p'.  Return little or big
2432         print fn accordingly.
2433         * arc-opc.c (arc_opcode_init_tables): Init arc_operand_map once.
2434         (arc_opcode_supported): Use ARC_OPCODE_CPU to ignore byte order.
2435         (arc_opval_supported): Likewise.
2436         * disassemble.c (disassembler): Pass big endian flag to
2437         arc_get_disassembler.
2438 end-sanitize-arc
2439
2440 Tue Mar  7 16:41:21 1995  Ian Lance Taylor  <ian@cygnus.com>
2441
2442         * ppc-opc.c: Sort recently added instructions by minor opcode
2443         number within major opcode number.
2444
2445 Mon Mar  6 10:04:36 1995  Jeff Law  (law@snake.cs.utah.edu)
2446
2447         * hppa-dis.c: Include libhppa.h.
2448
2449 Fri Feb 24 19:15:36 1995  Ian Lance Taylor  <ian@cygnus.com>
2450
2451         * mips-opc.c: Change dli to use M_DLI, and add dla.
2452
2453 Mon Feb 20 23:54:38 1995  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
2454
2455         * Makefile.in (ALL_MACHINES):  Add w65-dis.o.
2456
2457 start-sanitize-arc
2458 Fri Feb 17 12:42:25 1995  Doug Evans  <dje@chestnut.cygnus.com>
2459
2460         * arc-dis.c (arc_get_disassembler): Change argument to int,
2461         one of bfd_mach_arc_xxx.  All callers updated.
2462 end-sanitize-arc
2463
2464 Thu Feb 16 17:34:41 1995  Ian Lance Taylor  <ian@cygnus.com>
2465
2466         * mips-opc.c: Add r4650 mul instruction.
2467
2468 Wed Feb 15 15:45:20 1995  Ian Lance Taylor  <ian@cygnus.com>
2469
2470         * mips-opc.c: Add uld and usd macros for unaligned double load and
2471         store.
2472
2473 Tue Feb 14 13:17:37 1995  Michael Meissner  <meissner@tiktok.cygnus.com>
2474
2475         * ppc-opc.c (powerpc_opcodes): Add 403GA opcodes rfci, dccci,
2476         mfdcr, mtdcr, icbt, iccci.
2477
2478 start-sanitize-arc
2479 Mon Feb 13 11:09:17 1995  Doug Evans  <dje@canuck.cygnus.com>
2480
2481         * arc-dis.c (print_insn): Handle ARC_OPERAND_ADDRESS.
2482         * arc-opc.c (arc_operands): New operand 'J' for jump addresses.
2483         ('L' operand): Mark as ARC_OPERAND_ADDRESS.
2484         (arc_opcodes, j insn): Use 'J' operand type, not 'L'.
2485         (arc_opcodes, ld/st insns): Fix address writeback operand letter.
2486         (insert_absaddr): New function.
2487
2488 Thu Feb  9 19:19:23 1995  Doug Evans  <dje@canuck.cygnus.com>
2489
2490         * arc-dis.c (print_insn_arc): Rename to print_insn and make static.
2491         New argument `cpu', pass it to arc_opcode_init_tables.
2492         Document byte order dependencies.  Ignore unsupported insns.
2493         (arc_get_disassembler): New function.
2494         (print_insn_arc_base, print_insn_arc_host, print_insn_arc_graphics,
2495         print_insn_arc_audio): New functions.
2496         * arc-opc.c (MULTSHIFT operand): Delete.
2497         (UNSIGNED, SATURATION): New operands.
2498         (mac, mul, mul64, mulu64): New insns.
2499         (ext. asl, asr, lsr, ror): Only available on host and graphics cpus.
2500         (padc, padd, pmov, pand, psbc, psub, swap): New insns.
2501         (host,graphics,audio extended and auxiliary regs): Define.
2502         (ss, sc, mh, ml): New suffixes.
2503         (arc_opcode_supported, arc_opval_supported): New functions.
2504         (insert_multshift, extract_multshift): Deleted.
2505         * disassemble.c (disassembler, case bfd_arch_arc): Call
2506         arc_get_disassembler to get disassembler routine.
2507 end-sanitize-arc
2508
2509 Thu Feb  9 12:28:13 1995  Stan Shebs  <shebs@andros.cygnus.com>
2510
2511         * i960-dis.c (struct tabent, struct sparse_tabent): Change the
2512         signed char fields to shorts, more portable.
2513
2514 Wed Feb  8 17:29:29 1995  Stan Shebs  <shebs@andros.cygnus.com>
2515
2516         * i960-dis.c (struct tabent, struct sparse_tabent): Declare the
2517         char fields as signed chars, since they may have negative values.
2518
2519 Mon Feb  6 10:52:06 1995  J.T. Conklin  <jtc@rtl.cygnus.com>
2520
2521         * i386-dis.c (dis386_twobyte): Add cpuid, From Charles Hannum
2522           (mycroft@netbsd.org).
2523
2524 Mon Jan 30 12:38:00 1995  Ian Lance Taylor  <ian@cygnus.com>
2525
2526         From "Logg, Ed" <elogg@ea.com>:
2527         * ppc-opc.c (extract_bdm): Correct parenthezisation.
2528         * ppc-dis.c (print_insn_powerpc): Print .long before unrecognized
2529         value.
2530
2531 Thu Jan 26 18:32:08 1995  Ian Lance Taylor  <ian@cygnus.com>
2532
2533         * ppc-opc.c: Changes based on patch from David Edelsohn
2534         <edelsohn@mhpcc.edu>.
2535         (powerpc_operands): Add operands SPRBAT and SPRG. Split TBR out of
2536         SPR.
2537         (FXM_MASK): Define.
2538         (insert_tbr): New static function.
2539         (extract_tbr): New static function.
2540         (XFXFXM_MASK, XFXM): Define.
2541         (XSPRBAT_MASK, XSPRG_MASK): Define.
2542         (powerpc_opcodes): Add instructions to access special registers by
2543         name.  Add mtcr and mftbu.
2544
2545 Tue Jan 17 10:56:43 1995  Ian Lance Taylor  <ian@sanguine.cygnus.com>
2546
2547         * mips-opc.c (P3): Define.
2548         (mips_opcodes): Add mad and madu.
2549
2550 Sun Jan 15 16:32:59 1995  Steve Chamberlain  <sac@splat>
2551
2552         * configure.in: Add W65 support.
2553         * disassemble.c: Likewise.
2554         * w65-opc.h, w65-dis.c: New files.
2555
2556 Wed Dec 28 22:15:33 1994  Steve Chamberlain  (sac@jonny.cygnus.com)
2557
2558         * h8300-dis.c (bfd_h8_disassemble): Add support for 2 bit
2559         immediates.
2560
2561 start-sanitize-arc
2562 Tue Dec 20 10:36:55 1994  Doug Evans  <dje@canuck.cygnus.com>
2563
2564         * arc-dis.c (print_insn_arc): Branch offsets are relative to delay
2565         slot.
2566         * arc-opc.c (extract_reladdr): New function.
2567         (insert_reladdr): Store address right-shifted by 2.
2568 end-sanitize-arc
2569
2570 Tue Dec 20 11:25:12 1994  Ian Lance Taylor  <ian@sanguine.cygnus.com>
2571
2572         * mips-opc.c: Add dli as a synonym for li.
2573
2574 start-sanitize-arc
2575 Mon Dec 19 12:35:51 1994  Doug Evans  <dje@canuck.cygnus.com>
2576
2577         * arc-opc.c (insertion fns): Pass pointer to value's table entry.
2578         All uses changed.
2579         (extraction fns): Insn argument now array of two words.  Return pointer
2580         to value's table entry.  All uses changed.
2581         (arc_opcode_lookup_suffix): Exported for arc-dis.c.
2582         (insert_multshift, extract_multshift): New fns.
2583         (arc_operands): Add support for cache bypass suffix.  Add support for
2584         predefined aux regs.  Modifier bits moved to flags field.
2585         (arc_opcodes): Likewise.
2586         Add mul/mulu/shift insns.  Syntax of zero/sign extension insns changed.
2587         New insn rlc.  Update to syntax in programmer's manual.
2588         (arc_reg_names): Fix typo in lp_count.  Add predefined aux regs.
2589         (arc_suffixes): New synonyms lo,hs for cs,cc.  New suffix for cache
2590         bypass.
2591         (arc_opcode_init_tables): New argument to indicate cpu type.
2592         (insert_reg): Handle predefined aux regs.
2593         (extract_reg): Likewise.
2594         (lookup_register): New fn.
2595         * arc-dis.c (arc_condition_codes): Deleted.
2596         (print_insn_arc): Handle insns with 32 bit immediate constants better.
2597         Clean up modifier handling.  Handle predefined aux regs.
2598 end-sanitize-arc
2599
2600 Thu Dec  8 18:23:31 1994  Ken Raeburn  <raeburn@cujo.cygnus.com>
2601
2602         * alpha-dis.c (print_insn_alpha): Handle call_pal instruction, and
2603         print something for reserved opcode values, even if it won't
2604         assemble again.
2605
2606         * mips-dis.c (_print_insn_mips): When initializing, shift right
2607         and mask, to avoid sign extension problems on the Alpha.
2608
2609         * m68k-dis.c (print_insn_arg, case 'J'): Handle buscr and pcr
2610         control registers.
2611
2612 start-sanitize-arc
2613 Tue Nov 29 18:02:43 1994  Doug Evans  <dje@canuck.cygnus.com>
2614
2615         * configure.in: Add ARC support.
2616         * disassemble.c: Likewise.
2617         * arc-dis.c, arc-opc.c: New files.
2618 end-sanitize-arc
2619
2620 Wed Nov 23 22:34:51 1994  Steve Chamberlain  (sac@jonny.cygnus.com)
2621
2622         * sh-opc.h (mov.l gbr): Get direction right.
2623         * sh-dis.c (print_insn_shx): New function.
2624         (print_insn_shl, print_insn_sh): Call print_insn_shx to
2625         print opcodes with right byte order.
2626
2627 Thu Nov  3 19:32:22 1994  Ken Raeburn  <raeburn@cujo.cygnus.com>
2628
2629         * ns32k-dis.c (struct ns32k_option): Renamed from struct option,
2630         to avoid conflicts with getopt.
2631
2632 Mon Oct 31 18:48:10 1994  Ian Lance Taylor  <ian@sanguine.cygnus.com>
2633
2634         * hppa-dis.c (print_insn_hppa): Read the instruction using
2635         bfd_getb32, so that it works on a little endian or 64 bit host.
2636         Remove unused local variable op.
2637
2638 Tue Oct 25 17:07:57 1994  Ian Lance Taylor  <ian@sanguine.cygnus.com>
2639
2640         * mips-opc.c: Use or instead of addu for pseudo-op move, since
2641         addu does not work correctly if -mips3.
2642
2643 Wed Oct 19 13:40:16 1994  Ian Lance Taylor  <ian@sanguine.cygnus.com>
2644
2645         * a29k-dis.c (print_special): Add special register names defined
2646         on 29030, 29040 and 29050.
2647         (print_insn): Handle new operand type 'I'.
2648
2649 Wed Oct 12 11:59:55 1994  Ian Lance Taylor  <ian@sanguine.cygnus.com>
2650
2651         * Makefile.in (INSTALL): Use top level install.sh script.
2652
2653 Wed Oct  5 19:16:29 1994  Ian Lance Taylor  <ian@sanguine.cygnus.com>
2654
2655         * sparc-dis.c: Rewrite to use bitfields, rather than a union, so
2656         that it works on a little endian host.
2657
2658 Tue Oct  4 12:14:21 1994  Ian Lance Taylor  <ian@sanguine.cygnus.com>
2659
2660         * configure.in: Use ${config_shell} when running config.bfd.
2661
2662 Wed Sep 21 18:49:12 1994  Ian Lance Taylor  (ian@sanguine.cygnus.com)
2663
2664         * mips-opc.c (mips_opcodes): "dabs" is only available with -mips3.
2665
2666 Thu Sep 15 16:30:22 1994  Ian Lance Taylor  (ian@sanguine.cygnus.com)
2667
2668         * a29k-dis.c (print_insn): Print the opcode.
2669
2670 Wed Sep 14 17:52:14 1994  Ian Lance Taylor  (ian@sanguine.cygnus.com)
2671
2672         * mips-opc.c (mips_opcodes): Set WR_t for sc and scd.
2673
2674 Sun Sep 11 22:32:17 1994  Jeff Law  (law@snake.cs.utah.edu)
2675
2676         * hppa-dis.c (reg_names): Use r26-r23 for arg0-arg3.
2677
2678 Tue Sep  6 11:37:12 1994  Ian Lance Taylor  (ian@sanguine.cygnus.com)
2679
2680         * mips-opc.c: Set INSN_STORE_MEMORY flag for all instructions
2681         which store a value into memory.
2682
2683 Sun Sep 04 17:58:10 1994  Richard Earnshaw (rwe@pegasus.esprit.ec.org)
2684
2685         * configure.in, Makefile.in, disassemble.c: Add support for the ARM.
2686         * arm-dis.c, arm-opc.h: New files.
2687
2688 Fri Aug  5 14:00:05 1994  Stan Shebs  (shebs@andros.cygnus.com)
2689
2690         * Makefile.in (ns32k-dis.o): Add dependency.
2691         * ns32k-dis.c (print_insn_arg): Declare initialized local as
2692         string, not as array of chars.
2693
2694 Thu Jul 28 18:14:16 1994  Ken Raeburn  (raeburn@cujo.cygnus.com)
2695
2696         * sparc-dis.c (print_insn_sparc): Handle new operand type 'x'.
2697
2698         * sparc-opc.c: Added sparclite extended FP operations, and
2699         versions of v9 impdep* instructions permitting specification of
2700         the OPF field.
2701
2702 Tue Jul 26 16:36:03 1994  Ken Raeburn  (raeburn@cujo.cygnus.com)
2703
2704         * i960-dis.c (reg_names): Now const.
2705         (struct sparse_tabent): New type, copied from array type in mem
2706         function.
2707         (ctrl): Local static array ctrl_tab now const.
2708         (cobr): Local static array cobr_tab now const.
2709         (mem): Local variables reg1, reg2, reg3 now point to const.  Local
2710         static variable mem_tab no longer explicitly initialized.  Changed
2711         mem_init to const array of struct sparse_tabent.
2712         (reg): Local static variable reg_tab no longer explicitly
2713         initialized.  Changed reg_init to const array of struct
2714         sparse_tabent.
2715         (ea): Local static array scale_tab now const.
2716
2717         * i960-dis.c (reg): Added i960JX instructions to reg_init table.
2718         (REG_MAX): Updated.
2719
2720 Tue Jul 19 21:00:00 1994  DJ Delorie (dj@ctron.com)
2721
2722         * configure.bat: the disassember needs to be enabled for
2723         "objdump -d" to work in djgpp.
2724
2725 Wed Jul 13 18:01:58 1994  Ken Raeburn  (raeburn@cujo.cygnus.com)
2726
2727         * ns32k-dis.c: Deleted all code in "#ifdef GDB".
2728         (invalid_float): Enabled general version, doesn't require running
2729         on ns32k host.  Changed to take char* argument, and test for
2730         explicitly specified sizes, instead of using sizeof() on host CPU
2731         types.
2732         (INVALID_FLOAT): Cast first argument.
2733         (opt_u, opt_U, opt_O, opt_C, opt_S, list_P532, list_M532,
2734         list_P032, list_M032): Now const.
2735         (optlist, list_search): Made appropriate arguments now point to
2736         const.
2737         (print_insn_arg): Changed static array of one-character-string
2738         pointers into a static const array of characters; fixed sprintf
2739         statement accordingly.
2740
2741 Sun Jul 10 00:27:47 1994  Ian Dall  (dall@hfrd.dsto.gov.au)
2742
2743         * opcodes/ns32k-dis.c: Semi-new file.  Had apparently been dropped
2744         from distribution. A ns32k-dis.c from a previous distribution has
2745         been brought up to date and supports the new interface.
2746
2747         * disassemble.c: define ARCH_ns32k and add case bfd_arch_ns32k.
2748
2749         * configure.in: add bfd_ns32k_arch target support.
2750
2751         * Makefile.in: add ns32k-dis.o to ALL_MACHINES.
2752         Add ns32k-dis.c to CFILES. Add dependencies for ns32k-dis.o.
2753
2754 Wed Jun 29 22:10:37 1994  Steve Chamberlain  (sac@cygnus.com)
2755
2756         * h8300-dis.c (bfd_h8_disassemble): Get 16bit branch
2757         disassembly right.
2758
2759 Tue Jun 28 13:22:06 1994  Stan Shebs  (shebs@andros.cygnus.com)
2760
2761         * h8300-dis.c, mips-dis.c: Don't use true and false.
2762
2763 Thu Jun 23 12:53:19 1994  David J. Mackenzie  (djm@rtl.cygnus.com)
2764
2765         * configure.in: Change --with-targets to --enable-targets.
2766
2767 Wed Jun 22 13:38:32 1994  Ian Lance Taylor  (ian@sanguine.cygnus.com)
2768
2769         * mips-dis.c (_print_insn_mips): Build a static hash table mapping
2770         opcodes to the first instruction with that opcode, to speed
2771         disassembly of large files.  From ralphc@pyramid.com (Ralph
2772         Campbell).
2773
2774 Tue Jun  7 12:49:44 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
2775
2776         * Makefile.in (mostlyclean): Fix typo (was mostyclean).
2777
2778 Wed May 11 22:32:00 1994  DJ Delorie (dj@ctron.com)
2779
2780         * configure.bat: update to latest makefile.in
2781
2782 Sat May  7 17:13:21 1994  Steve Chamberlain  (sac@cygnus.com)
2783
2784         * a29k-dis.c (print_insn): Print 'x' type operand in hex.
2785         * h8300-dis.c (bfd_h8_disassemble): Print 16bit rels correctly.
2786         * sh-dis.c (print_insn_sh): Don't recur endlessly if delay
2787         slot insn is in a delay slot.
2788         * z8k-opc.h: (resflg): Fix patterns.
2789         * h8500-opc.h Fix CR insn patterns.
2790
2791 Fri May  6 14:34:46 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
2792
2793         * ppc-opc.c (powerpc_opcodes): Put PowerPC versions of "cmp" and
2794         "cmpl" before POWER versions, so that gas -many uses them.
2795
2796 Thu Apr 28 18:32:36 1994  Ken Raeburn  (raeburn@cujo.cygnus.com)
2797
2798         * disassemble.c: New file.
2799         * Makefile.in (OFILES): Add disassemble.o.
2800         (disassemble.o): Provide dependencies; compile with $(ARCHDEFS).
2801         * configure.in: Define ARCHDEFS in Makefile.  Code taken from
2802         binutils/configure.in.
2803
2804         * m68k-dis.c (print_insn_m68k): If F_ALIAS flag is set, skip the
2805         opcode being examined.
2806
2807 Thu Apr 21 17:08:40 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
2808
2809         * ppc-opc.c (powerpc_operands): Added RAL, RAM and RAS.
2810         (insert_ral, insert_ram, insert_ras): New functions.
2811         (powerpc_opcodes): Use RAL for load with update, RAM for lmw, and
2812         RAS for store with update.
2813
2814 Sat Apr 16 23:41:44 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
2815
2816         * ppc-opc.c (powerpc_opcodes): Correct fcir.  From David Edelsohn
2817         (edelsohn@npac.syr.edu).
2818
2819 Wed Apr  6 17:11:45 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
2820
2821         * mips-opc.c (mips_opcodes): Correct operands of "nor" with an
2822         immediate argument.
2823
2824 Mon Apr  4 16:30:46 1994  Doug Evans  (dje@canuck.cygnus.com)
2825
2826         * sparc-opc.c (sparc_opcodes): Fix "rd %fprs,%l0".
2827
2828 Mon Apr  4 13:22:00 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
2829
2830         * ppc-opc.c (powerpc_operands): The signedp field has been
2831         removed, so don't initialize it.  Set the PPC_OPERAND_SIGNED flag
2832         instead.  Add new operand SISIGNOPT.
2833         (powerpc_opcodes): For lis, liu, addis, and cau use SISIGNOPT.
2834         Based on patch from David Edelsohn (edelsohn@npac.syr.edu).
2835         * ppc-dis.c (print_insn_powerpc): Check PPC_OPERAND_SIGNED rather
2836         than signedp field.
2837
2838 Wed Mar 30 00:31:49 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
2839
2840         * i386-dis.c (struct private):  Renamed to dis_private. `private'
2841         is a reserved word for dynix cc.
2842
2843 Mon Mar 28 13:00:15 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
2844
2845         * configure.in: Change error message to refer to bfd/config.bfd
2846         rather than bfd/configure.in.
2847
2848 Mon Mar 28 12:28:30 1994  David Edelsohn  (edelsohn@npac.syr.edu)
2849
2850         * ppc-opc.c: Define POWER2 as short alias flag.
2851         (powerpc_opcodes): Add POWER/2 opcodes lfq*, stfq*, fcir[z], and
2852         fsqrt.
2853
2854 Wed Mar 23 12:23:05 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
2855
2856         * i960-dis.c (print_insn_i960): Don't read a second word for
2857         opcodes 0, 1, 2 and 3.
2858
2859 Wed Mar 16 15:37:58 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
2860
2861         * configure.in: Don't build m68881-ext.o for bfd_m68k_arch.
2862
2863 Mon Mar 14 14:53:50 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
2864
2865         * m68881-ext.c: Removed; no longer used.
2866         * Makefile.in: Changed accordingly.
2867
2868         * m68k-dis.c (ext_format_68881): Don't declare.
2869         (print_insn_m68k): If an instruction uses place 'i', it uses at
2870         least four fixed bytes.
2871         (print_insn_arg): Don't bump p by 2 for case 'I', place 'i'.  For
2872         extended float, convert to double using floatformat_to_double, not
2873         ieee_extended_to_double, and fetch the data before converting it.
2874
2875 Tue Mar  8 18:12:25 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
2876
2877         * mips-opc.c: It's sqrt.s, not sqrt.w.  From
2878         davidj@ICSI.Berkeley.EDU (David Johnson).
2879
2880 Tue Feb  8 16:55:27 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
2881
2882         * ppc-opc.c (powerpc_opcodes): The POWER uses bdn[l][a] where the
2883         PowerPC uses bdnz[l][a].
2884
2885 Tue Feb  8 00:32:28 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
2886
2887         * dis-buf.c, i386-dis.c:  Include sysdep.h.
2888
2889 Mon Feb  7 19:22:23 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
2890
2891         * configure.in (bfd_powerpc_arch): Use ppc-dis.o and ppc-opc.o.
2892
2893         * ppc-opc.c (powerpc_opcodes): Mark POWER instructions supported
2894         by Motorola PowerPC 601 with PPC_OPCODE_601.
2895         * ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc):
2896         Disassemble Motorola PowerPC 601 instructions as well as normal
2897         PowerPC instructions.
2898
2899 Sun Feb  6 07:45:17 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
2900
2901         * i960-dis.c (reg, mem): Just use a static array instead of
2902         calling xmalloc.
2903
2904 Sat Feb  5 00:04:02 1994  Jeffrey A. Law  (law@snake.cs.utah.edu)
2905
2906         * hppa-dis.c (print_insn_hppa): For '?' and '@' only adjust the
2907         condition name index if this is for a negated condition.
2908
2909         * hppa-dis.c (print_insn_hppa): No space before 'H' operand.
2910         Floating point format for 'H' operand is backwards from normal
2911         case (0 == double, 1 == single).  For '4', '6', '7', '9', and '8'
2912         operands (fmpyadd and fmpysub), handle bizarre register
2913         translation correctly for single precision format.
2914
2915         * hppa-dis.c (print_insn_hppa): Do not emit a space after 'F'
2916         or 'I' operands if the next format specifier is 'M' (fcmp
2917         condition completer).
2918
2919 Feb  4 23:38:03 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
2920
2921         * ppc-opc.c (powerpc_operands): New operand type MBE to handle a
2922         single number giving a bitmask for the MB and ME fields of an M
2923         form instruction.  Change NB to accept 32, and turn it into 0;
2924         also turn 0 into 32 when disassembling.  Seperated SH from NB.
2925         (insert_mbe, extract_mbe): New functions.
2926         (insert_nb, extract_nb): New functions.
2927         (SC_MASK): Mask out SA and LK bits.
2928         (powerpc_opcodes): Change "cal" to use RT, D, RA rather than RT,
2929         RA, SI.  Change "liu" and "cau" to use UI rather than SI.  Mark
2930         "bctr" and "bctrl" as accepted by POWER.  Change "rlwimi",
2931         "rlimi", "rlwimi.", "rlimi.", "rlwinm", "rlinm", "rlwinm.",
2932         "rlinm.", "rlmi", "rlmi.", "rlwnm", "rlnm", "rlwnm.", "rlnm." to
2933         use MBE rather than MB.  Add "mfmq" and "mtmq" POWER instructions.
2934         (powerpc_macros): Define table of macro definitions.
2935         (powerpc_num_macros): Define.
2936
2937         * ppc-dis.c (print_insn_powerpc): Don't skip optional operands
2938         if PPC_OPERAND_NEXT is set.
2939
2940 Sat Jan 22 23:10:07 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
2941
2942         * i960-dis.c (print_insn_i960): Make buffer bfd_byte instead of
2943         char.  Retrieve contents using bfd_getl32 instead of shifting.
2944
2945 Fri Jan 21 19:01:39 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
2946
2947         * ppc-opc.c: New file.  Opcode table for PowerPC, including
2948         opcodes for POWER (RS/6000).
2949         * ppc-dis.c: New file.  PowerPC and Power (RS/6000) disassembler.
2950         * Makefile.in (ALL_MACHINES): Add ppc-dis.o and ppc-opc.o.
2951         (CFILES): Add ppc-dis.c.
2952         (ppc-dis.o, ppc-opc.o): New targets.
2953         * configure.in: Build ppc-dis.o and ppc-opc.o for bfd_rs6000_arch.
2954
2955 Mon Jan 17 20:05:49 1994  Jeffrey A. Law  (law@snake.cs.utah.edu)
2956
2957         * hppa-dis.c (print_insn_hppa): Handle 'N' in assembler template.
2958         No space before 'u', 'f', or 'N'.
2959
2960 Sun Jan 16 14:20:16 1994  Jim Kingdon  (kingdon@deneb.cygnus.com)
2961
2962         * i386-dis.c (print_insn_i386): Add FIXME comment regarding reading
2963         farther than we should.
2964
2965         * i386-dis.c (dis386): Use Yb and Yv for scasb and scasS.
2966
2967 Thu Jan  6 12:38:05 1994  David J. Mackenzie  (djm@thepub.cygnus.com)
2968
2969         * sparc-dis.c m68k-dis.c alpha-dis.c a29k-dis.c: Fix comments.
2970
2971 Wed Jan  5 11:56:21 1994  David J. Mackenzie  (djm@thepub.cygnus.com)
2972
2973         * i960-dis.c (print_insn_i960): Only read word2 if the instruction
2974         needs it, to prevent reading past the end of a section.
2975
2976 Wed Nov 17 17:20:12 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
2977
2978         * mips-opc.h: Use macro for j instruction, to support SVR4 PIC.
2979         Removed t,A case for la; always use t,A(b) case.
2980
2981 Mon Nov  8 12:37:36 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
2982
2983         From Ted Lemen <mellon@pepper.ncd.com>
2984         * mips-dis.c (print_insn_arg): Handle 'k'.
2985         * mips-opc.c: Make cache use k, not t.
2986
2987 Sun Nov  7 23:52:34 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
2988
2989         * alpha-opc.h, alpha-dis.c (print_insn_alpha):  Add
2990         FLOAT_MEMORY_FORMAT_CODE, FLOAT_BRANCH_FORMAT_CODE, correct
2991         FLOAT_FORMAT_CODE to put out floating point register names.
2992
2993 Mon Nov  1 18:17:51 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
2994
2995         * mips-opc.c: Use macros for jal variants, to support SVR4 PIC.
2996
2997 Thu Oct 28 17:42:23 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
2998
2999         * a29k-dis.c (print_insn): Use 0x%08x, not 0x%8x.
3000
3001 Wed Oct 27 11:48:01 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
3002
3003         * mips-opc.c (dsll, dsra, dsrl): Added '>' cases for shift counts
3004         larger than 32.  Moved dsxx32 variants first for disassembler.
3005
3006 Mon Oct 25 11:33:14 1993  Steve Chamberlain  (sac@phydeaux.cygnus.com)
3007
3008         * z8kgen.c, z8k-opc.h: Add full lda information.
3009
3010 Tue Oct 19 12:39:25 1993  Jeffrey A Law  (law@cs.utah.edu)
3011
3012         * hppa-dis.c (print_insn_hppa): Do not emit a space after
3013         movb instructions.  Any necessary space will be emitted by
3014         the code to handle nullification completers.
3015
3016 Wed Oct 13 16:19:07 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
3017
3018         * mips-opc.c: Moved l.d down so that it disassembles as ldc1.
3019
3020 Fri Oct  8 02:34:21 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
3021
3022         * alpha-opc.h:  Add ldl_l, fix typo for ldq_u.
3023         * alpha-dis.c (print_insn_alpha):  Add code for PAL_FORMAT_CODE.
3024
3025 Tue Oct  5 17:47:53 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
3026
3027         * mips-opc.c: Correct lwu opcode value (book had it wrong).
3028
3029 Thu Sep 30 11:26:18 1993  Steve Chamberlain  (sac@phydeaux.cygnus.com)
3030
3031         * z8k-dis.c (FETCH_DATA): get just the right amount of data.
3032         (unpack_instr): Cope with ARG_IMM4M1 type instructions.
3033
3034 Wed Sep 29 16:24:49 1993  K. Richard Pixley  (rich@sendai.cygnus.com)
3035
3036         * m88k-dis.c (m88kdis): comment change.  Remove space after
3037           printing mnemonic.
3038           (printop): handle new arg types DEC and XREG for m88110.
3039
3040 Tue Sep 28 19:20:16 1993  Jeffrey A Law (law@snake.cs.utah.edu)
3041
3042         * hppa-dis.c (print_insn_hppa): Handle 'z' operand
3043         type for absolute branch addresses.  Delete special
3044         "ble" and "be" code in 'W' operand code.
3045
3046 Fri Sep 24 14:08:33 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
3047
3048         * mips-opc.c: Set hazard information correctly for branch
3049         likely instructions.
3050
3051 Fri Sep 17 04:41:17 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
3052
3053         * alpha-dis.c (print_insn_alpha), alpha-opc.h:  Fix bugs, use
3054         info->fprintf_func for printing and info->print_address_func for
3055         address output.
3056
3057 Wed Sep 15 12:12:07 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
3058
3059         * mips-opc.c: Set INSN_TRAP for tXX instructions.
3060
3061 Thu Sep  9 10:11:27 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
3062
3063         * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson):
3064         Corrected second case of "b" for disassembler.
3065
3066 Tue Sep  7 14:25:15 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
3067
3068         * mips-dis.c, m88k-dis.c: Don't include libbfd.h.  Changed calls
3069         to BFD swapping routines to correspond to BFD name changes.
3070
3071 Thu Sep  2 10:35:25 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
3072
3073         * mips-opc.c: Change div machine instruction to be z,s,t rather
3074         than s,t.  Change div macro to be d,v,t rather than d,s,t.
3075         Likewise for divu, ddiv, ddivu.  Added z,s,t case for drem, dremu,
3076         rem and remu which generates only the corresponding div
3077         instruction.  This is for compatibility with the MIPS assembler,
3078         which only generates the simple machine instruction when an
3079         explicit destination of $0 is used.
3080         * mips-dis.c (print_insn_arg): Handle 'z' (always register zero).
3081
3082 Thu Aug 26 17:41:44 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
3083
3084         * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Set
3085         WR_31 hazard for bal, bgezal, bltzal.
3086
3087 Thu Aug 26 17:20:02 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
3088
3089         * hppa-dis.c (print_insn_hppa): Use print function
3090         from within the disassemble_info, not fprintf_filtered.
3091
3092 Wed Aug 25 13:51:40 1993  Ken Raeburn  (raeburn@cambridge.cygnus.com)
3093
3094         * hppa-dis.c (print_insn_hppa): Handle '|' like '>'.  (From Jeff
3095         Law, law@cs.utah.edu.)
3096
3097 Mon Aug 23 12:44:05 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
3098
3099         * mips-opc.c ("absu"): Removed.
3100         ("dabs"): Added.
3101
3102 Fri Aug 20 10:52:52 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
3103
3104         * mips-opc.c: Added r6000 and r4000 instructions and macros.
3105         Changed hazard information to distinguish between memory load
3106         delays and coprocessor load delays.
3107
3108 Wed Aug 18 15:39:23 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
3109
3110         * mips-opc.c: li.d uses "T,L", not "S,F".  Added li.s.
3111
3112 Tue Aug 17 09:44:42 1993  David J. Mackenzie  (djm@thepub.cygnus.com)
3113
3114         * configure.in: Don't pass cpu to config.bfd.
3115
3116 Tue Aug 17 12:23:52 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
3117
3118         * m88k-dis.c (m88kdis): Make class unsigned.
3119
3120 Thu Aug 12 15:08:18 1993  Ian Lance Taylor  (ian@cygnus.com)
3121
3122         * alpha-dis.c (print_insn_alpha): One branch format case was
3123         missing the instruction name.
3124
3125 Wed Aug 11 19:29:39 1993  David J. Mackenzie  (djm@thepub.cygnus.com)
3126
3127         * Makefile.in (ALL_MACHINES): Renamed from DIS_LIBS.
3128         Add the arch-specific auxiliary files.
3129         (OFILES): Remove the arch-specific auxiliary files
3130         and use BFD_MACHINES instead of DIS_LIBS.
3131         * configure.in: Set BFD_MACHINES based on --with-targets option.
3132
3133 Thu Aug 12 12:04:53 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
3134
3135         * mips-opc.c: Added lwc1 E,A(b) to go with lwc1 T,A(b).  Similarly
3136         for swc1.
3137
3138 Sun Aug  8 15:09:30 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
3139
3140         * sparc-opc.c: Change CONST to const to deal with gcc
3141         -Dconst=__const -traditional.
3142
3143 Fri Aug  6 10:58:55 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
3144
3145         * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Took
3146         coprocessor instructions out of #if 0, and made them use new
3147         argument type "C".
3148
3149 Thu Aug  5 17:11:06 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
3150
3151         * sparc-dis.c: Include ansidecl.h before opcodes/sparc.h.
3152
3153 Fri Jul 30 18:48:15 1993  John Gilmore  (gnu@cygnus.com)
3154
3155         * sparc-opc.c:  Add F_JSR, F_UNBR, or F_CONDBR flags to each branch
3156         instruction, for use by the disassembler.
3157
3158         * sparc-dis.c (SEX):  Add sign extension macro.  Replace many
3159         hand-coded sign extensions that depended on 32-bit host ints.
3160         FIXME, we still depend on big-endian host bitfield ordering.
3161         (sparc_print_insn):  Set the insn_info_valid field, and the
3162         other fields that describe the instruction being printed.
3163
3164 Tue Jul 27 17:04:58 1993  Jim Wilson  (wilson@sphagnum.cygnus.com)
3165
3166         * sparc-opc.c (call): Accept all 6 addressing modes valid for
3167         `jmp' instead of just one of them.
3168
3169 Wed Jul 21 11:43:32 1993  Jim Kingdon  (kingdon@deneb.cygnus.com)
3170
3171         * hppa-dis.c: Move floating registers from reg_names to fp_reg_names.
3172         (fput_fp_reg_r): Renamed from fput_reg_r.
3173         (fput_fp_reg): New function.
3174         (print_insn_hppa): Use fput_fp_reg{,_r} where appropriate.
3175
3176         * hppa-dis.c (print_insn_hppa, cases 'a', 'd'): Print space afterwards.
3177
3178         * hppa-dis.c (print_insn_hppa, case 'd'): Use GET_COND not GET_FIELD.
3179
3180 Mon Jul 19 13:52:21 1993  Jim Kingdon  (kingdon@deneb.cygnus.com)
3181
3182         * hppa-dis.c (print_insn_hppa): Use extract_5r_store for 'r'.
3183
3184         * hppa-dis.c (print_insn_hppa, case '>'): If next character is 'n',
3185         don't output a space.
3186
3187         * hppa-dis.c (float_format_names): 10 is undefined, and 11 is quad.
3188
3189 Sun Jul 18 16:30:02 1993  Jim Kingdon  (kingdon@rtl.cygnus.com)
3190
3191         * mips-opc.c: New file, containing opcode table from
3192         ../include/opcode/mips.h.
3193         * Makefile.in: Add it.
3194
3195 Thu Jul 15 12:37:05 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
3196
3197         * m88k-dis.c: New file, moved in from gdb and changed to use the
3198         new dis-asm.h disassembler interface.
3199         * Makefile.in (DIS_LIBS): Added m88k-dis.o.
3200         (m88k-dis.o): New target.
3201
3202 Tue Jul 13 10:04:16 1993  Ian Lance Taylor  (ian@cygnus.com)
3203
3204         * mips-dis.c (print_insn_arg, _print_insn_mips): Made pointer to
3205         argument string const char * to correspond to opcode/mips.h.
3206
3207 Tue Jul  6 15:18:37 1993  Ian Lance Taylor  (ian@cygnus.com)
3208
3209         * mips-dis.c: Updated to account for name changes in new version
3210         of opcode/mips.h.
3211         * Makefile.in: Added header file dependencies.
3212
3213 Sat Jul  3 23:47:56 1993  Doug Evans  (dje@canuck.cygnus.com)
3214
3215         * h8300-dis.c (bfd_h8_disassemble): Correct fetching of instruction.
3216
3217 Thu Jul  1 12:23:38 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
3218
3219         * m68k-dis.c (NEXTWORD, NEXTLONG): Use ((x) ^ 0x8000) - 0x8000 to sign
3220         extend, rather than shifts.
3221
3222 Sun Jun 20 20:56:56 1993  Ken Raeburn  (raeburn@poseidon.cygnus.com)
3223
3224         * Makefile.in: Undo 15 June change.
3225
3226 Fri Jun 18 14:15:15 1993  Per Bothner  (bothner@deneb.cygnus.com)
3227
3228         * m68k-dis.c (print_insn_arg):  Change return value to byte count
3229         or error code.
3230         * m68k-dis.c:  Re-write to detect invalid operands before
3231         printing anything, so we can handle this the same way we
3232         handle invalid opcodes.
3233
3234 Thu Jun 17 15:01:36 1993  Steve Chamberlain  (sac@phydeaux.cygnus.com)
3235
3236         * sh-dis.c, sh-opc.h: Understand some more opcodes.
3237
3238 Wed Jun 16 13:48:05 1993  Ian Lance Taylor  (ian@cygnus.com)
3239
3240         * hppa-dis.c: Include <ansidecl.h> and sysdep.h before other
3241         header files.
3242
3243 Tue Jun 15 21:45:26 1993  Ken Raeburn  (raeburn@cambridge.cygnus.com)
3244
3245         * sparc-dis.c: Don't declare qsort, since sysdep.h might.
3246
3247         * configure.in: Do make sysdep.h link.
3248         * Makefile.in: Search ../include.  Don't search ../bfd.
3249
3250 Tue Jun 15 13:36:10 1993  Stu Grossman  (grossman@cygnus.com)
3251
3252         Changes from Jeff Law, law@cs.utah.edu:
3253         * hppa-dis.c: Fix typo.  'a' and 'd' were reversed.
3254         Do not print a space before the completers specified by
3255         'a' and 'd'.
3256
3257 Fri Jun 11 18:40:21 1993  Ken Raeburn  (raeburn@cygnus.com)
3258
3259         * mips-dis.c: No longer need to bomb out if HOST_64_BIT is
3260         defined, since gdb has been fixed.
3261
3262         Changes from Jeff Law, law@cs.utah.edu:
3263         * hppa-dis.c (print_insn_hppa): Last argument to fput_reg,
3264         fput_reg_r, fput_creg, fput_const, and fputs_filtered should
3265         be a *disassemble_info, not a *FILE.
3266         * hppa-dis.c: Support 'd', '!', and 'a'.
3267         * hppa-dis.c: Support 's' to extract a 2 bit space register.
3268         * hppa-dis.c: Delete cases which are no longer needed.
3269
3270 Fri Jun 11 07:53:48 1993  Jim Kingdon  (kingdon@cygnus.com)
3271
3272         * m68k-dis.c (print_insn_{m68k,arg}): Add MMU codes.
3273
3274 Tue Jun  8 12:25:01 1993  Steve Chamberlain  (sac@phydeaux.cygnus.com)
3275
3276         * h8300-dis.c: New file, removed from bfd/cpu-h8300.c, with
3277         H8/300-H opcodes.
3278
3279 Mon Jun  7 12:58:49 1993  Per Bothner  (bothner@rtl.cygnus.com)
3280
3281         * Makefile.in (CSEARCH): Add -I../bfd for sysdep.h and bfd.h.
3282         * configure.in:  No longer need to configure to get sysdep.h.
3283
3284 Thu Jun  3 15:56:49 1993  Stu Grossman  (grossman@cygnus.com)
3285
3286         * Patches from Jeffrey Law <law@cs.utah.edu>.
3287         * hppa-dis.c: Support 'I', 'J', and 'K' in output
3288         templates for 1.1 FP computational instructions.
3289
3290 Tue May 25 13:05:48 1993  Ken Raeburn  (raeburn@cambridge.cygnus.com)
3291
3292         * h8500-dis.c (print_insn_h8500): Address argument is type
3293         bfd_vma.
3294         * z8k-dis.c (print_insn_z8k, print_insn_z8001, print_insn_z8002):
3295         Ditto.
3296
3297         * h8500-opc.h (addr_class_type): No comma at end of enumerator.
3298         * sh-opc.h (sh_nibble_type, sh_arg_type): Ditto.
3299
3300         * sparc-dis.c (compare_opcodes): Move static declaration to
3301         top-level.
3302
3303 Fri May 21 14:17:37 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
3304
3305         * sparc-dis.c (print_insn_sparc): Implement 'n' argument for unimp
3306         instruction, remove unimp hack from 'l' argument.
3307
3308 Wed May 19 15:35:54 1993  Stu Grossman  (grossman@cygnus.com)
3309
3310         * z8k-dis.c (fetch_data):  Use unsigned char to make ancient gcc's
3311         happy.
3312
3313 Fri May 14 15:22:46 1993  Ian Lance Taylor  (ian@cygnus.com)
3314
3315         * Based on patches from davidj@ICSI.Berkeley.EDU (David Johnson):
3316         * mips-dis.c (print_insn_arg): Handle 'C' for general coprocessor
3317         instructions.
3318
3319 Fri May 14 00:09:14 1993  Ken Raeburn  (raeburn@cambridge.cygnus.com)
3320
3321         * hppa-dis.c: Include dis-asm.h before sysdep.h.  Changed some
3322         arrays of string pointers to 2-d arrays of chars, to save
3323         space.
3324
3325 Thu May  6 20:51:17 1993  Fred Fish  (fnf@cygnus.com)
3326
3327         * a29k-dis.c, alpha-dis.c, i960-dis.c, sparc-dis.c, z8k-dis.c:
3328         Cast second arg to read_memory_func to "bfd_byte *", as necessary.
3329
3330 Tue May  4 20:31:10 1993  Ken Raeburn  (raeburn@cambridge.cygnus.com)
3331
3332         * hppa-dis.c: New file from Utah, adapted to new disassembler
3333         calling interface.
3334         * Makefile.in: Include it.
3335
3336 Mon Apr 26 18:17:42 1993  Steve Chamberlain  (sac@thepub.cygnus.com)
3337
3338         * sh-dis.c, sh-opc.h: New files.
3339
3340 Fri Apr 23 18:51:22 1993  Steve Chamberlain  (sac@thepub.cygnus.com)
3341
3342         * alpha-dis.c, alpha-opc.h: New files.
3343
3344 Tue Apr  6 12:54:08 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
3345
3346         * mips-dis.c: Sign extend 'j' and 'b' arguments, delta is a signed
3347         value.
3348
3349 Mon Apr  5 17:37:37 1993  John Gilmore  (gnu@cygnus.com)
3350
3351         * sparc-dis.c: Make "ta" the default trap instruction, "t" the alias.
3352
3353 Fri Apr  2 07:24:27 1993  Ian Lance Taylor  (ian@cygnus.com)
3354
3355         * a29k-dis.c, sparc-dis.c, sparc-opc.c: Use CONST rather than
3356         const.
3357
3358 Thu Apr  1 11:20:43 1993  Jim Kingdon  (kingdon@cygnus.com)
3359
3360         * sparc-dis.c: Use fprintf_func a few places where I forgot,
3361         and double percent signs a few places.
3362
3363         * a29k-dis.c, i960-dis.c: New, merged from gdb and binutils.
3364
3365         * i386-dis.c, m68k-dis.c, mips-dis.c, sparc-dis.c:
3366         Use info->print_address_func not print_address.
3367
3368         * dis-buf.c (generic_print_address): New function.
3369
3370 Wed Mar 31 10:07:04 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
3371
3372         * Makefile.in: Add sparc-dis.c.
3373         sparc-dis.c: New file, merges binutils and gdb versions as follows:
3374         From GDB:
3375             Add `add' instruction to the set that get checked
3376             for a preceding `sethi' in order to print an absolute address.
3377             * (print_insn):  Disassembly prefers real instructions.
3378             (is_delayed_branch):  Speed up.
3379             * sparc-opcode.h: Add ALIAS bit to aliases.  Fix up opcode tables.
3380             Still missing some float ops, and needs testing.
3381             * sparc-pinsn.c (print_insn): Eliminate 'set' test, subsumed by
3382             F_ALIAS.  Use printf, not fprintf, when not passing a file
3383             pointer...
3384             (compare_opcodes): Check that identical instructions have
3385             identical opcodes, complain otherwise.
3386         From binutils:
3387             * New 'm' arg.
3388             * Include reg_names.
3389         From neither:
3390             Use dis-asm.h/read_memory_func interface.
3391
3392 Wed Mar 31 20:49:06 1993  K. Richard Pixley  (rich@rtl.cygnus.com)
3393
3394         * h8500-dis.c, i386-dis.c, m68k-dis.c, z8k-dis.c (fetch_data):
3395           deliberately return non-zero to setjmp from longjmp.  Otherwise
3396           this code fails to compile.
3397
3398 Wed Mar 31 17:04:31 1993  Stu Grossman  (grossman@cygnus.com)
3399
3400         * m68k-dis.c:  Fix prototype for fetch_arg().
3401
3402 Wed Mar 31 10:07:04 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
3403
3404         * dis-buf.c: New file, for new read_memory_func interface.
3405         Makefile.in (OFILES): Include it.
3406         m68k-dis.c, i386-dis.c, h8500-dis.c, mips-dis.c, z8k-dis.c:
3407         Use new read_memory_func interface.
3408
3409 Mon Mar 29 14:02:17 1993  Steve Chamberlain  (sac@thepub.cygnus.com)
3410
3411         * h8500-dis.c (print_insn_h8500): Get sign of fp offsets right.
3412         * h8500-opc.h: Fix couple of opcodes.
3413
3414 Wed Mar 24 02:03:36 1993  david d `zoo' zuhn  (zoo at poseidon.cygnus.com)
3415
3416         * Makefile.in: add dvi & installcheck targets
3417
3418 Mon Mar 22 18:55:04 1993  John Gilmore  (gnu@cygnus.com)
3419
3420         * Makefile.in:  Update for h8500-dis.c.
3421
3422 Fri Mar 19 14:27:17 1993  Steve Chamberlain  (sac@thepub.cygnus.com)
3423
3424         * h8500-dis.c, h8500-opc.h: New files
3425
3426 Thu Mar 18 14:12:37 1993  Per Bothner  (bothner@rtl.cygnus.com)
3427
3428         * mips-dis.c, z8k-dis.c:  Converted to use interface defined in
3429         ../include/dis-asm.h.
3430         * m68k-dis.c:  New file (merge of ../binutils/m68k-pinsn.c
3431         and ../gdb/m68k-pinsn.c).
3432         * i386-dis.c:  New file (merge of ../binutils/i386-pinsn.c
3433         and ../gdb/i386-pinsn.c).
3434         * m68881-ext.c:  New file.  Moved definition of
3435         ext_format ext_format_68881 from ../gdb/m68k-tdep.c.
3436         * Makefile.in:  Adjust for new files.
3437         * i386-dis.c:  Patches from John Hassey (hassey@dg-rtp.dg.com).
3438         * m68k-dis.c:  Recognize '9' placement code, so (say) pflush
3439         can be dis-assembled.
3440
3441 Wed Feb 17 09:19:47 1993  Ken Raeburn  (raeburn@cambridge.cygnus.com)
3442
3443         * mips-dis.c (print_insn_arg): Now returns void.
3444
3445 Mon Jan 11 16:09:16 1993  Fred Fish  (fnf@cygnus.com)
3446
3447         * mips-dis.c (ansidecl.h):  Include for benefit of sysdep.h
3448         files that use the macros.
3449
3450 Thu Jan  7 13:15:17 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
3451
3452         * mips-dis.c: New file, from gdb/mips-pinsn.c.
3453         * Makefile.in (DIS_LIBS): Added mips-dis.o.
3454         (CFILES): Added mips-dis.c.
3455
3456 Thu Jan  7 07:36:33 1993  Steve Chamberlain  (sac@thepub.cygnus.com)
3457
3458         * z8k-dis.c (print_insn_z8001, print_insn_z8002): new routines
3459         * z8kgen.c, z8k-opc.h: fix sizes of some shifts.
3460
3461 Tue Dec 22 15:42:44 1992  Per Bothner  (bothner@rtl.cygnus.com)
3462
3463         * Makefile.in:  Improve *clean rules.
3464         * configure.in:  Allow a default host.
3465
3466 Tue Nov 17 19:53:54 1992  david d `zoo' zuhn  (zoo at cirdan.cygnus.com)
3467
3468         * Makefile.in: also use -I$(srcdir)/../bfd, since some sysdep
3469         files include other sysdep files
3470
3471 Thu Nov 12 16:10:37 1992  Steve Chamberlain  (sac@thepub.cygnus.com)
3472
3473         * z8k-dis.c z8k-opc.h z8kgen.c: checkpoint
3474
3475 Fri Oct  9 04:56:05 1992  John Gilmore  (gnu@cygnus.com)
3476
3477         * configure.in:  For host support, use ../bfd/configure.host
3478         so it stays in sync with the ../bfd/hosts database.
3479
3480 Thu Oct  1 23:38:54 1992  david d `zoo' zuhn  (zoo at cirdan.cygnus.com)
3481
3482         * configure.in: use cpu-vendor-os triple instead of nested cases
3483
3484 Wed Sep 30 16:09:20 1992  Michael Werner  (mtw@cygnus.com)
3485
3486         * z8k-dis.c (unparse_instr): fix bug where opcode returned was
3487         *always* the wrong one.
3488
3489 Wed Sep 30 07:42:17 1992  Steve Chamberlain  (sac@thepub.cygnus.com)
3490
3491         * z8kgen.c: added copyright info
3492
3493 Tue Sep 29 12:20:21 1992  Steve Chamberlain  (sac@thepub.cygnus.com)
3494
3495         * z8k-dis.c (unparse_instr): prettier tabs
3496         * z8kgen.c -> z8k-opc.h: bug fixes in tables
3497
3498 Fri Sep 25 12:50:32 1992  Stu Grossman  (grossman at cygnus.com)
3499
3500         * configure.in:  Add ncr* configuration.
3501         * z8k-dis.c (struct instr_data_s):  Make instr_asmsrc char to make
3502         picayune ANSI compilers happy.
3503
3504 Sep 20 08:50:55 1992  Fred Fish  (fnf@cygnus.com)
3505
3506         * configure.in (i386):  Make i386 and i486 synonymous for now.
3507         * configure.in (i[34]86-*-sysv4):  Add my_host definition.
3508
3509 Fri Sep 18 17:01:23 1992  Ken Raeburn  (raeburn@cambridge.cygnus.com)
3510
3511         * Makefile.in (install): Fix typo.
3512
3513 Fri Sep 18 02:04:24 1992  John Gilmore  (gnu@cygnus.com)
3514
3515         * Makefile.in (make):  Remove obsolete crud.
3516         (sparc-opc.o):  Avoid Sun Make VPATH bug.
3517
3518 Tue Sep  8 17:29:27 1992  K. Richard Pixley  (rich@sendai.cygnus.com)
3519
3520         * Makefile.in: since there are no SUBDIRS, remove rule and
3521         references of subdir_do.
3522
3523 Tue Sep  8 17:02:58 1992  Ken Raeburn  (raeburn@cambridge.cygnus.com)
3524
3525         * Makefile.in (install): Get the library name right here too.
3526         Don't install bfd.h, since it's unrelated to this library.  No
3527         subdirs to recurse into, either.
3528         (CFILES): The source file has a .c suffix, not .o.
3529
3530         * sparc-opc.c: New file, moved from BFD.
3531         * Makefile.in (OFILES): Build it.
3532
3533 Thu Sep  3 16:59:20 1992  Michael Werner  (mtw@cygnus.com)
3534
3535         * z8k-dis.c: fixed forward refferences of some declarations.
3536
3537 Mon Aug 31 16:09:45 1992  Michael Werner  (mtw@cygnus.com)
3538
3539         * Makefile.in: get the name of the library right
3540
3541 Mon Aug 31 13:47:35 1992  Steve Chamberlain  (sac@thepub.cygnus.com)
3542
3543         * z8k-dis.c: knows how to disassemble z8k stuff
3544         * z8k-opc.h: new file full of z8000 opcodes
3545
3546 \f
3547 Local Variables:
3548 version-control: never
3549 End: