1 Mon Dec 16 13:00:15 1996 Jeffrey A Law (law@cygnus.com)
3 * mn10200-opc.c: Add pseudo-ops for "mov (an),am" and "mov an,(am)".
5 Sat Dec 14 22:36:20 1996 Ian Lance Taylor <ian@cygnus.com>
7 * mips-dis.c (print_mips16_insn_arg): The base address of a PC
8 relative load or add now depends upon whether the instruction is
11 Wed Dec 11 09:23:46 1996 Jeffrey A Law (law@cygnus.com)
13 * mn10200-dis.c: Finish writing disassembler.
14 * mn10200-opc.c (mn10200_opcodes): Fix mask for "mov imm8,dn".
15 Fix mask for "jmp (an)".
17 * mn10300-dis.c (disassemble, print_insn_mn10300): Corrently
18 handle endianness issues for mn10300.
20 * mn10200-opc.c (mn10200_opcodes): Fix operands for "movb dm,(an)".
22 Tue Dec 10 12:08:05 1996 Jeffrey A Law (law@cygnus.com)
24 * mn10200-opc.c (mn10200_opcodes): "mov imm8,d0" is a format 2
25 instruction. Fix opcode field for "movb (imm24),dn".
27 * mn10200-opc.c (mn10200_operands): Fix insertion position
30 Mon Dec 9 16:42:43 1996 Jeffrey A Law (law@cygnus.com)
32 * mn10200-opc.c: Create mn10200 opcode table.
33 * mn10200-dis.c: Flesh out mn10200 disassembler. Not ready,
34 but moving along nicely.
36 Sun Dec 8 04:28:31 1996 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
38 * Makefile.in (ALL_MACHINES): Add mips16-opc.o.
40 Fri Dec 6 16:47:40 1996 J.T. Conklin <jtc@rhino.cygnus.com>
42 * m68k-opc.c (m68k_opcodes): Revert change to use < and >
43 specifiers for fmovem* instructions.
45 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
47 * mn10300-dis.c (disassemble): Remove '$' register prefixing.
49 Fri Dec 6 17:34:39 1996 Ian Lance Taylor <ian@cygnus.com>
51 * mips16-opc.c: Change opcode for entry/exit to avoid conflicting
54 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
56 * mn10300-opc.c: Add some comments explaining the various
59 * mn10300-dis.c (disassemble): Fix minor gcc -Wall warnings.
61 Thu Dec 5 12:09:48 1996 J.T. Conklin <jtc@rtl.cygnus.com>
63 * m68k-dis.c (print_insn_arg): Handle new < and > operand
66 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
67 operand specifiers in fmovm* instructions.
69 Wed Dec 4 14:52:18 1996 Ian Lance Taylor <ian@cygnus.com>
71 * ppc-opc.c (insert_li): Give an error if the offset has the two
72 least significant bits set.
74 Wed Nov 27 13:09:01 1996 Ian Lance Taylor <ian@cygnus.com>
76 * mips-dis.c (print_insn_mips16): Separate the instruction from
77 the arguments with a tab, not a space.
79 Tue Nov 26 13:24:17 1996 Jeffrey A Law (law@cygnus.com)
81 * mn10300-dis.c (disasemble): Finish conversion to '$' as
84 * mn10300-opc.c (mn10300_opcodes): Fix mask field for
87 Tue Nov 26 10:53:21 1996 Ian Lance Taylor <ian@cygnus.com>
89 * configure: Rebuild with autoconf 2.12.
91 Add support for mips16 (16 bit MIPS implementation):
92 * mips16-opc.c: New file.
93 * mips-dis.c: Include "elf-bfd.h" and "elf/mips.h".
94 (mips16_reg_names): New static array.
95 (print_insn_big_mips): Use print_insn_mips16 in 16 bit mode or
96 after seeing a 16 bit symbol.
97 (print_insn_little_mips): Likewise.
98 (print_insn_mips16): New static function.
99 (print_mips16_insn_arg): New static function.
100 * mips-opc.c: Add jalx instruction.
101 * Makefile.in (mips16-opc.o): New target.
102 * configure.in: Use mips16-opc.o for bfd_mips_arch.
103 * configure: Rebuild.
105 Mon Nov 25 16:15:17 1996 J.T. Conklin <jtc@cygnus.com>
107 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
108 operand specifiers in *save, *restore and movem* instructions.
110 * m68k-opc.c (m68k_opcodes): Fix move and movem instructions for
113 * m68k-opc.c (m68k_opcodes): The coldfire (mcf5200) can only use
114 register operands for immediate arithmetic, not, neg, negx, and
115 set according to condition instructions.
117 * m68k-opc.c (m68k_opcodes): Consistantly Use "s" as the storage
118 specifier of the effective-address operand in immediate forms of
119 arithmetic instructions. The specifier for the immediate operand
120 notes how and where the constant will be stored.
122 Mon Nov 25 11:17:01 1996 Jeffrey A Law (law@cygnus.com)
124 * mn10300-opc.c (mn10300_opcodes): Remove redundant "lcc"
127 * mn10300-dis.c (disassemble): Use '$' instead of '%' for
130 * mn10300-dis.c (disassemble): Prefix registers with '%'.
132 Wed Nov 20 10:37:13 1996 Jeffrey A Law (law@cygnus.com)
134 * mn10300-dis.c (disassemble): Handle register lists.
136 * mn10300-opc.c: Fix handling of register list operand for
137 "call", "ret", and "rets" instructions.
139 * mn10300-dis.c (disassemble): Print PC-relative and memory
140 addresses symbolically if possible.
141 * mn10300-opc.c: Distinguish between absolute memory addresses,
142 pc-relative offsets & random immediates.
144 * mn10300-dis.c (print_insn_mn10300): Fix fetch of last byte
146 (disassemble): Handle SPLIT and EXTENDED operands.
148 Tue Nov 19 13:33:01 1996 Jeffrey A Law (law@cygnus.com)
150 * mn10300-dis.c: Rough cut at printing some operands.
152 * mn10300-dis.c: Start working on disassembler support.
153 * mn10300-opc.c (mn10300_opcodes): Fix masks on several insns.
155 * mn10300-opc.c (mn10300_operands): Add "REGS" for a register
157 (mn10300_opcodes): Use REGS for register list in "movm" instructions.
160 Mon Nov 18 15:20:35 1996 Michael Meissner <meissner@tiktok.cygnus.com>
162 * d10v-opc.c (d10v_opcodes): Add3 sets the carry.
165 Fri Nov 15 13:43:19 1996 Jeffrey A Law (law@cygnus.com)
167 * mn10300-opc.c (mn10300_opcodes): Demand parens around
168 register argument is calls and jmp instructions.
170 Thu Nov 7 00:26:05 1996 Jeffrey A Law (law@cygnus.com)
172 * mn10300-opc.c (mn10300_opcodes): Use DN01 for putx and
173 getx operand. Fix opcode for mulqu imm,dn.
175 Wed Nov 6 13:42:32 1996 Jeffrey A Law (law@cygnus.com)
177 * mn10300-opc.c (mn10300_operands): Hijack "bits" field
178 in MN10300_OPERAND_SPLIT operands for how many bits
179 appear in the basic insn word. Add IMM32_HIGH24,
180 IMM32_HIGH24_LOWSHIFT8, IMM8E_SHIFT8.
181 (mn10300_opcodes): Use new operands as needed.
183 * mn10300-opc.c (mn10300_operands): Add IMM32_LOWSHIFT8
184 for bset, bclr, btst instructions.
185 (mn10300_opcodes): Use new IMM32_LOWSHIFT8 as needed.
187 * mn10300-opc.c (mn10300_operands): Remove many redundant
188 operands. Update opcode table as appropriate.
189 (IMM32): Add MN10300_OPERAND_SPLIT flag.
190 (mn10300_opcodes): Fix single bit error in mov imm32,dn insn.
192 Tue Nov 5 13:26:58 1996 Jeffrey A Law (law@cygnus.com)
194 * mn10300-opc.c (mn10300_operands): Add DN2, DM2, AN2, AM2
195 operands (for indexed load/stores). Fix bitpos for DI
196 operand. Add SN8N_SHIFT8, IMM8_SHIFT8, and D16_SHIFT for the
197 few instructions that insert immediates/displacements in the
198 middle of the instruction. Add IMM8E for 8 bit immediate in
199 the extended part of an instruction.
200 (mn10300_operands): Use new opcodes as appropriate.
203 Tue Nov 5 10:30:51 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
205 * d10v-opc.c (d10v_opcodes): Declare the trap instruction
206 sequential so the assembler never parallelizes it with
210 Mon Nov 4 12:50:40 1996 Jeffrey A Law (law@cygnus.com)
212 * mn10300-opc.c (mn10300_operands): Add DN01 and AN01 for
213 a data/address register that appears in register field 0
214 and register field 1.
215 (mn10300_opcodes): Use DN01 and AN01 for mov/cmp imm8,DN/AN
217 Fri Nov 1 10:29:11 1996 Richard Henderson <rth@tamu.edu>
219 * alpha-dis.c (print_insn_alpha): Use new NOPAL mask for
220 standard disassembly.
222 * alpha-opc.c (alpha_operands): Rearrange flags slot.
223 (alpha_opcodes): Add new BWX, CIX, and MAX instructions.
224 Recategorize PALcode instructions.
227 Wed Oct 30 16:46:58 1996 Jeffrey A Law (law@cygnus.com)
229 * v850-opc.c (v850_opcodes): Add relaxing "jbr".
232 Tue Oct 29 16:30:28 1996 Ian Lance Taylor <ian@cygnus.com>
234 * mips-dis.c (_print_insn_mips): Don't print a trailing tab if
235 there are no operand types.
238 Tue Oct 29 12:22:21 1996 Jeffrey A Law (law@cygnus.com)
240 * v850-opc.c (D9_RELAX): Renamed from D9, all references
242 (v850_operands): Make sure D22 immediately follows D9_RELAX.
245 Fri Oct 25 12:12:53 1996 Ian Lance Taylor <ian@cygnus.com>
247 * i386-dis.c (print_insn_x86): Set info->bytes_per_line to 5.
250 Thu Oct 24 17:53:52 1996 Jeffrey A Law (law@cygnus.com)
252 * v850-opc.c (insert_d8_6): Fix operand insertion for sld.w
253 and sst.w instructions.
255 * v850-opc.c (v850_opcodes): Add "jCC" instructions (aliases for
259 Thu Oct 24 17:21:20 1996 Ian Lance Taylor <ian@cygnus.com>
261 * mips-dis.c (_print_insn_mips): Use a tab between the instruction
264 Tue Oct 22 23:32:56 1996 Ian Lance Taylor <ian@cygnus.com>
266 * ppc-opc.c (PPCPWR2): Define.
267 (powerpc_opcodes): Use PPCPWR2 for fsqrt, rather than duplicating
270 Fri Oct 11 16:03:49 1996 Jeffrey A Law (law@cygnus.com)
272 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode
273 field for movhu instruction.
276 * v850-dis.c (disassemble): For V850_OPERAND_SIGNED operands,
277 cast value to "long" not "signed long" to keep hpux10
281 Thu Oct 10 10:25:58 1996 Jeffrey A Law (law@cygnus.com)
283 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode field
286 * mn10300-opc.c (FMT*): Remove definitions.
288 * mn10300-opc.c (mn10300_opcodes): Fix destination register
289 for shift-by-register opcodes.
291 * mn10300-opc.c (mn10300_operands): Break DN, DM, AN, AM
292 into [AD][MN][01] for encoding the position of the register
295 Wed Oct 9 11:19:26 1996 Jeffrey A Law (law@cygnus.com)
297 * mn10300-opc.c (mn10300_opcodes): Add "extended" instructions,
298 "putx", "getx", "mulq", "mulqu", "sat16", "sat24", "bsch".
300 Tue Oct 8 11:55:35 1996 Jeffrey A Law (law@cygnus.com)
302 * mn10300-opc.c (mn10300_operands): Remove "REGS" operand.
303 Fix various typos. Add "PAREN" operand.
305 (mn10300_opcodes): Surround all memory addresses with "PAREN"
306 operands. Fix several typos.
308 * mn10300-opc.c (mn10300_opcodes): Fix typos in yesterday's
311 Mon Oct 7 16:48:45 1996 Jeffrey A Law (law@cygnus.com)
313 * mn10300-opc.c (FMT_XX): Renumber starting at one.
314 (mn10300_operands): Rough cut. Enough to parse "mov" instructions
316 (mn10300_opcodes): Break opcode format out into its own field.
317 Update many operand fields to deal with signed vs unsigned
318 issues. Fix one or two typos in the "mov" instruction
319 opcode, mask and/or operand fields.
321 Mon Oct 7 11:39:49 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
323 * m68k-opc.c (plusha): Prefer encoding for m68040up, in case
326 Thu Oct 3 17:17:02 1996 Ian Lance Taylor <ian@cygnus.com>
328 * mn10300-opc.c (mn10300_opcodes): Add opcode & masks for
329 all opcodes. Very rough cut at operands for all opcodes.
331 * mn10300-opc.c (mn10300_opcodes): Start fleshing out the
334 Thu Oct 3 10:06:07 1996 Jeffrey A Law (law@cygnus.com)
336 * mn10200-opc.c, mn10300-opc.c: New files.
337 * mn10200-dis.c, mn10300-dis.c: New files.
338 * mn10x00-opc.c, mn10x00-dis.c: Deleted.
339 * disassemble.c: Break mn10x00 support into 10200 and 10300
341 * configure.in: Likewise.
342 * configure: Rebuilt.
344 Thu Oct 3 15:59:12 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
346 * Makefile.in (MOSTLYCLEAN): Move config.log to distclean.
348 Wed Oct 2 23:28:42 1996 Jeffrey A Law (law@cygnus.com)
350 * mn10x00-opc.c, mn10x00-dis.c: New files for Matsushita
352 * disassemble (ARCH_mn10x00): Define.
353 (disassembler): Handle bfd_arch_mn10x00.
354 * configure.in: Recognize bfd_mn10x00_arch.
355 * configure: Rebuilt.
357 Tue Oct 1 10:49:11 1996 Ian Lance Taylor <ian@cygnus.com>
359 * i386-dis.c (op_rtn): Change to be a pointer. Adjust uses
360 accordingly. Don't declare functions using op_rtn.
363 Fri Sep 27 18:28:59 1996 Stu Grossman (grossman@critters.cygnus.com)
365 * v850-dis.c (disassemble): Add memaddr argument. Re-arrange
366 params to be more standard.
367 * (disassemble): Print absolute addresses and symbolic names for
368 branch and jump targets.
369 * v850-opc.c (v850_operand): Add displacement flag to 9 and 22
371 * (v850_opcodes): Add breakpoint insn.
374 Mon Sep 23 12:32:26 1996 Ian Lance Taylor <ian@cygnus.com>
376 * m68k-opc.c: Move the fmovemx data register cases before the
377 other cases, so that they get recognized before the data register
378 does gets treated as a degenerate register list.
380 Tue Sep 17 12:06:51 1996 Ian Lance Taylor <ian@cygnus.com>
382 * mips-opc.c: Add a case for "div" and "divu" with two registers
383 and a destination of $0.
385 Tue Sep 10 16:12:39 1996 Fred Fish <fnf@rtl.cygnus.com>
387 * mips-dis.c (print_insn_arg): Add prototype.
388 (_print_insn_mips): Ditto.
390 Mon Sep 9 14:26:26 1996 Ian Lance Taylor <ian@cygnus.com>
392 * mips-dis.c (print_insn_arg): Print condition code registers as
395 Tue Sep 3 12:09:46 1996 Doug Evans <dje@canuck.cygnus.com>
397 * sparc-opc.c (sparc_opcodes): Add setuw, setsw, setx.
400 Tue Sep 3 12:05:25 1996 Jeffrey A Law (law@cygnus.com)
402 * v850-dis.c (disassemble): Make static. Provide prototype.
404 Sun Sep 1 22:30:40 1996 Jeffrey A Law (law@cygnus.com)
406 * v850-opc.c (insert_d9, insert_d22): Fix boundary case
409 Sat Aug 31 01:27:26 1996 Jeffrey A Law (law@cygnus.com)
411 * v850-dis.c (disassemble): Handle insertion of ',', '[' and
412 ']' characters into the output stream.
413 * v850-opc.c (v850_opcodes: Remove size field from all opcodes.
414 Add "memop" field to all opcodes (for the disassembler).
415 Reorder opcodes so that "nop" comes before "mov" and "jr"
418 * v850-dis.c (print_insn_v850): Fix typo in last change.
420 * v850-dis.c (print_insn_v850): Properly handle disassembling
421 a two byte insn at the end of a memory region when the memory
422 region's size is only two byte aligned.
424 * v850-dis.c (v850_cc_names): Fix stupid thinkos.
426 * v850-dis.c (v850_reg_names): Define.
427 (v850_sreg_names, v850_cc_names): Likewise.
428 (disassemble): Very rough cut at printing operands (unformatted).
430 * v850-opc.c (BOP_MASK): Fix.
431 (v850_opcodes): Fix mask for jarl and jr.
433 * v850-dis.c: New file. Skeleton for disassembler support.
434 * Makefile.in Remove v850 references, they're not needed here
435 and they weren't being sanitized away.
436 * configure.in: Add v850-dis.o when building v850 toolchains.
437 * configure: Rebuilt.
438 * disassemble.c (disassembler): Call v850 disassembler.
440 * v850-opc.c (insert_d8_7, extract_d8_7): New functions.
441 (insert_d8_6, extract_d8_6): New functions.
442 (v850_operands): Rename D7S to D7; operand for D7 is unsigned.
443 Rename D8 to D8_7, use {insert,extract}_d8_7 routines.
445 (IF4A, IF4B): Use "D7" instead of "D7S".
446 (IF4C, IF4D): Use "D8_7" instead of "D8".
447 (IF4E, IF4F): New. Use "D8_6".
448 (v850_opcodes): Use IF4A/IF4B for sld.b/sst.b. Use IF4C/IF4D for
449 sld.h/sst.h. Use IF4E/IF4F for sld.w/sst.w.
451 * v850-opc.c (insert_d16_15, extract_d16_15): New functions.
452 (v850_operands): Change D16 to D16_15, use special insert/extract
453 routines. New new D16 that uses the generic insert/extract code.
454 (IF7A, IF7B): Use D16_15.
455 (IF7C, IF7D): New. Use D16.
456 (v850_opcodes): Use IF7C and IF7D for ld.b and st.b.
458 * v850-opc.c (insert_d9, insert_d22): Slightly improve error
459 message. Issue an error if the branch offset is odd.
461 * v850-opc.c: Add notes about needing special insert/extract
462 for all the load/store insns, except "ld.b" and "st.b".
464 * v850-opc.c (insert_d22, extract_d22): New functions.
465 (v850_operands): Use insert_d22 and extract_d22 for
467 (insert_d9): Fix range check.
469 Fri Aug 30 18:01:02 1996 J.T. Conklin <jtc@hippo.cygnus.com>
471 * v850-opc.c (v850_operands): Add V850_OPERAND_SIGNED flag
472 and set bits field to D9 and D22 operands.
474 Thu Aug 29 11:10:46 1996 Jeffrey A Law (law@cygnus.com)
476 * v850-opc.c (v850_operands): Define SR2 operand.
477 (v850_opcodes): "ldsr" uses R1,SR2.
479 * v850-opc.c (v850_opcodes): Fix opcode specs for
480 sld.w, sst.b, sst.h, sst.w, and nop.
482 Wed Aug 28 15:55:43 1996 Jeffrey A Law (law@cygnus.com)
484 * v850-opc.c (v850_opcodes): Add null opcode to mark the
485 end of the opcode table.
489 Mon Aug 26 13:35:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
491 * d10v-opc.c (pre_defined_registers): Added register pairs,
492 "r0-r1", "r2-r3", etc.
496 Fri Aug 23 00:27:01 1996 Jeffrey A Law (law@cygnus.com)
498 * v850-opc.c (v850_operands): Make I16 be a signed operand.
499 Create I16U for an unsigned 16bit mmediate operand.
500 (v850_opcodes): Use I16U for "ori", "andi" and "xori".
502 * v850-opc.c (v850_operands): Define EP operand.
503 (IF4A, IF4B, IF4C, IF4D): Use EP.
505 * v850-opc.c (v850_opcodes): Fix opcode numbers for "mov"
506 with immediate operand, "movhi". Tweak "ldsr".
508 * v850-opc.c (v850_opcodes): Get ld.[bhw] and st.[bhw]
509 correct. Get sld.[bhw] and sst.[bhw] closer.
511 * v850-opc.c (v850_operands): "not" is a two byte insn
513 * v850-opc.c (v850_opcodes): Correct bit pattern for setf.
515 * v850-opc.c (v850_operands): D16 inserts at offset 16!
517 * v850-opc.c (two): Get order of words correct.
519 * v850-opc.c (v850_operands): I16 inserts at offset 16!
521 * v850-opc.c (v850_operands): Add "SR1" and "SR2" for system
522 register source and destination operands.
523 (v850_opcodes): Use SR1 and SR2 for "ldsr" and "stsr".
525 * v850-opc.c (v850_opcodes): Fix thinko in "jmp" opcode. Fix
526 same thinko in "trap" opcode.
528 * v850-opc.c (v850_opcodes): Add initializer for size field
531 * v850-opc.c (v850_operands): D6 -> DS7. References changed.
532 Add D8 for 8-bit unsigned field in short load/store insns.
533 (IF4A, IF4D): These both need two registers.
534 (IF4C, IF4D): Define. Use 8-bit unsigned field.
535 (v850_opcodes): For "sld.h", "sld.w", "sst.h", "sst.w", use
536 IF4C & IF4D. For "trap" use I5U, not I5. Add IF1 operand
537 for "ldsr" and "stsr".
538 * v850-opc.c (v850_operands): 3-bit immediate for bit insns
541 * v850-opc.c (v850_opcodes): Correct short store half (sst.h) and
542 short store word (sst.w).
544 Thu Aug 22 16:57:27 1996 J.T. Conklin <jtc@rtl.cygnus.com>
546 * v850-opc.c (v850_operands): Added insert and extract fields,
547 pointers to functions that handle unusual operand encodings.
549 Thu Aug 22 01:05:24 1996 Jeffrey A Law (law@cygnus.com)
551 * v850-opc.c (v850_opcodes): Enable "trap".
553 * v850-opc.c (v850_opcodes): Fix order of displacement
554 and register for "set1", "clr1", "not1", and "tst1".
556 Wed Aug 21 18:46:26 1996 Jeffrey A Law (law@cygnus.com)
558 * v850-opc.c (v850_operands): Add "B3" support.
559 (v850_opcodes): Fix and enable "set1", "clr1", "not1"
562 * v850-opc.c (v850_opcodes): "jmp" has only an R1 operand.
564 * v850-opc.c: Close unterminated comment.
566 Wed Aug 21 17:31:26 1996 J.T. Conklin <jtc@hippo.cygnus.com>
568 * v850-opc.c (v850_operands): Add flags field.
569 (v850_opcodes): add move opcodes.
571 Tue Aug 20 14:41:03 1996 J.T. Conklin <jtc@hippo.cygnus.com>
573 * Makefile.in (ALL_MACHINES): Add v850-opc.o.
574 * configure: (bfd_v850v_arch) Add new case.
575 * configure.in: (bfd_v850_arch) Add new case.
576 * v850-opc.c: New file.
579 Mon Aug 19 15:21:38 1996 Doug Evans <dje@canuck.cygnus.com>
581 * sparc-dis.c (print_insn_sparc): Handle little endian sparcs.
584 Thu Aug 15 13:14:43 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
586 * d10v-opc.c: Add additional information to the opcode
587 table to help determinine which instructions can be done
591 Thu Aug 15 13:11:13 1996 Stan Shebs <shebs@andros.cygnus.com>
593 * mpw-make.sed: Update editing of include pathnames to be
596 Thu Aug 15 16:28:41 1996 James G. Smith <jsmith@cygnus.co.uk>
598 * arm-opc.h: Added "bx" instruction definition.
600 Wed Aug 14 17:00:04 1996 Richard Henderson <rth@tamu.edu>
602 * alpha-opc.c (EV4EXTHWINDEX): Field width should be 8 not 5.
605 Mon Aug 12 14:30:37 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
607 * d10v-opc.c (d10v_opcodes): Minor fixes to addi and bl.l.
609 Fri Aug 9 13:21:59 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
611 * d10v-opc.c (d10v_opcodes): Correct 'mv' unit entry to EITHER.
614 Thu Aug 8 12:43:52 1996 Klaus Kaempf <kkaempf@progis.de>
616 * makefile.vms: Update for alpha-opc changes.
618 Wed Aug 7 11:55:10 1996 Ian Lance Taylor <ian@cygnus.com>
620 * i386-dis.c (print_insn_i386): Actually return the correct value.
621 (ONE, OP_ONE): #ifdef out; not used.
624 Fri Aug 2 17:47:03 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
626 * d10v-opc.c (d10v_opcodes): Added 2 accumulator sub instructions.
627 Changed subi operand type to treat 0 as 16.
630 Wed Jul 31 16:21:41 1996 Ian Lance Taylor <ian@cygnus.com>
632 * m68k-opc.c: Add cpushl for the mcf5200. From Ken Rose
635 Wed Jul 31 14:39:27 1996 James G. Smith <jsmith@cygnus.co.uk>
637 * arm-opc.h: (arm_opcodes): Added halfword and sign-extension
638 memory transfer instructions. Add new format string entries %h and %s.
639 * arm-dis.c: (print_insn_arm): Provide decoding of the new
643 Fri Jul 26 11:45:04 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
645 * d10v-opc.c (d10v_operands): Added UNUM4S; a 4-bit accumulator shift.
646 (d10v_opcodes): Modified accumulator shift instructions to use UNUM4S.
649 Fri Jul 26 14:01:43 1996 Ian Lance Taylor <ian@cygnus.com>
651 * alpha-dis.c (print_insn_alpha_osf): Remove.
652 (print_insn_alpha_vms): Remove.
653 (print_insn_alpha): Make globally visible. Chose the register
654 names based on info->flavour.
655 * disassemble.c: Always return print_insn_alpha for the alpha.
658 Thu Jul 25 15:24:17 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
660 * d10v-dis.c (dis_long): Handle unknown opcodes.
662 Thu Jul 25 12:08:09 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
664 * d10v-opc.c: Changes to support signed and unsigned numbers.
665 All instructions with the same name that have long and short forms
666 now end in ".l" or ".s". Divs added.
667 * d10v-dis.c: Changes to support signed and unsigned numbers.
669 Tue Jul 23 11:02:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
671 * d10v-dis.c: Change all functions to use info->print_address_func.
674 Mon Jul 22 15:38:53 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
676 * m68k-opc.c (m68k_opcodes): Make opcode masks for the ColdFire
677 move ccr/sr insns more strict so that the disassembler only
678 selects them when the addressing mode is data register.
681 Mon Jul 22 11:25:24 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
682 * d10v-opc.c (pre_defined_registers): Declare.
683 * d10v-dis.c (print_operand): Now uses pre_defined_registers
684 to pick a better name for the registers.
687 Mon Jul 22 13:47:23 1996 Ian Lance Taylor <ian@cygnus.com>
689 * sparc-opc.c: Fix opcode values for fpack16, and fpackfix. Fix
690 operands for fexpand and fpmerge. From Christian Kuehnke
691 <Christian.Kuehnke@arbi.informatik.uni-oldenburg.de>.
693 Mon Jul 22 13:17:06 1996 Richard Henderson <rth@tamu.edu>
695 * alpha-dis.c (print_insn_alpha): No longer the user-visible
696 print routine. Take new regnames and cpumask arguments.
697 Kill the environment variable nonsense.
698 (print_insn_alpha_osf): New function. Do OSF/1 style regnames.
699 (print_insn_alpha_vms): New function. Do VMS style regnames.
700 * disassemble.c (disassembler): Test bfd flavour to pick
701 between OSF and VMS routines. Default to OSF.
703 Thu Jul 18 17:19:34 1996 Ian Lance Taylor <ian@cygnus.com>
705 * configure.in: Call AC_SUBST (INSTALL_SHLIB).
706 * configure: Rebuild.
707 * Makefile.in (install): Use @INSTALL_SHLIB@.
710 Wed Jul 17 14:39:05 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
712 * configure: (bfd_d10v_arch) Add new case.
713 * configure.in: (bfd_d10v_arch) Add new case.
714 * d10v-dis.c: New file.
715 * d10v-opc.c: New file.
716 * disassemble.c (disassembler) Add entry for d10v.
719 Wed Jul 17 10:12:05 1996 J.T. Conklin <jtc@rtl.cygnus.com>
721 * m68k-opc.c (m68k_opcodes): Fix bugs in coldfire insns relating
722 to bcc, trapfl, subxl, and wddata discovered by Andreas Schwab.
724 Mon Jul 15 16:59:55 1996 Stu Grossman (grossman@critters.cygnus.com)
726 * i386-dis.c: Get rid of print_insn_i8086. Use info.mach to
727 distinguish between variants of the instruction set.
728 * sparc-dis.c: Get rid of print_insn_sparclite. Use info.mach to
729 distinguish between variants of the instruction set.
731 Fri Jul 12 10:12:01 1996 Stu Grossman (grossman@critters.cygnus.com)
733 * i386-dis.c (print_insn_i8086): New routine to disassemble using
734 the 8086 instruction set.
735 * i386-dis.c: General cleanups. Make most things static. Add
736 prototypes. Get rid of static variables aflags and dflags. Pass
737 them as args (to almost everything).
739 Thu Jul 11 11:58:44 1996 Jeffrey A Law (law@cygnus.com)
741 * h8300-dis.c (bfd_h8_disassemble): Handle macregs in ldmac insns.
743 * h8300-dis.c (bfd_h8_disassemble): Handle "ldm.l" and "stm.l".
745 * h8300-dis.c (bfd_h8_disassemble): "abs" is implicitly two
746 if the next arg is marked with SRC_IN_DST. Gross.
748 * h8300-dis.c (bfd_h8_disassemble): Print "exr" when
749 we're looking for and find EXR.
751 * h8300-dis.c (bfd_h8_disassemble): We don't have a match
752 if we're looking for KBIT and we don't find it.
754 * h8300-dis.c (bfd_h8_disassemble): Mask off unwanted bits
757 * h8300-dis.c (bfd_h8_disassemble): Don't set plen for
758 3bit immediate operands.
760 Tue Jul 9 10:55:20 1996 Ian Lance Taylor <ian@cygnus.com>
762 * Released binutils 2.7.
764 * alpha-opc.c: Add new case of "mov". From Klaus Kaempf
765 <kkaempf@progis.ac-net.de>.
767 Thu Jul 4 11:42:51 1996 Ian Lance Taylor <ian@cygnus.com>
769 * alpha-opc.c: Correct second case of "mov" to use OPRL.
771 Wed Jul 3 16:03:47 1996 Stu Grossman (grossman@critters.cygnus.com)
773 * sparc-dis.c (print_insn_sparclite): New routine to print
774 sparclite instructions.
776 Wed Jul 3 14:21:18 1996 J.T. Conklin <jtc@rtl.cygnus.com>
778 * m68k-opc.c (m68k_opcodes): Add coldfire support.
780 Fri Jun 28 15:53:51 1996 Doug Evans <dje@canuck.cygnus.com>
782 * sparc-opc.c (asi_table): Add #ASI_N, #ASI_N_L, #ASI_NUCLEUS,
783 #ASI_NUCLEUS_LITTLE. Rename #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_L
784 to #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_LITTLE.
786 Tue Jun 25 22:58:31 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
788 * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir):
789 Use autoconf-set values.
790 (docdir, oldincludedir): Removed.
791 * configure.in (AC_PREREQ): autoconf 2.5 or higher.
793 Fri Jun 21 13:53:36 1996 Richard Henderson <rth@tamu.edu>
795 * alpha-opc.c: New file.
796 * alpha-opc.h: Remove.
797 * alpha-dis.c: Complete rewrite to use new opcode table.
798 * configure.in: For bfd_alpha_arch, use alpha-opc.o.
799 * configure: Rebuild with autoconf 2.10.
800 * Makefile.in (ALL_MACHINES): Add alpha-opc.o.
801 (alpha-dis.o): Depend upon $(INCDIR)/opcode/alpha.h, not
803 (alpha-opc.o): New target.
805 Wed Jun 19 15:55:12 1996 Ian Lance Taylor <ian@cygnus.com>
807 * sparc-dis.c (print_insn_sparc): Remove unused local variable i.
808 Set imm_added_to_rs1 even if the source and destination register
811 * sparc-opc.c: Add some two operand forms of the wr instruction.
813 Tue Jun 18 15:58:27 1996 Jeffrey A. Law <law@rtl.cygnus.com>
815 * h8300-dis.c (bfd_h8_disassemble): Rename "hmode" argument
818 * disassemble.c (disassembler): Handle H8/S.
819 * h8300-dis.c (print_insn_h8300s): New function for H8/S.
821 Tue Jun 18 18:06:50 1996 Ian Lance Taylor <ian@cygnus.com>
823 * sparc-opc.c: Add beq/teq as aliases for be/te.
825 * ppc-opc.c: Fix fcmpo opcode. From Sergei Steshenko
826 <sergei@msil.sps.mot.com>.
828 Tue Jun 18 15:08:54 1996 Klaus Kaempf <kkaempf@progis.de>
830 * makefile.vms: New file.
832 * alpha-dis.c (print_insn_alpha): Print lda ra,lit(rz) as mov.
834 Mon Jun 10 18:50:38 1996 Ian Lance Taylor <ian@cygnus.com>
836 * h8300-dis.c (bfd_h8_disassemble): Always print ABS8MEM with :8,
839 Tue Jun 4 09:15:53 1996 Doug Evans <dje@canuck.cygnus.com>
841 * i386-dis.c (OP_OFF): Call append_prefix.
843 Thu May 23 15:18:23 1996 Michael Meissner <meissner@tiktok.cygnus.com>
845 * ppc-opc.c (instruction encoding macros): Add explicit casts to
846 unsigned long to silence a warning from the Solaris PowerPC
849 Thu Apr 25 19:33:32 1996 Doug Evans <dje@canuck.cygnus.com>
851 * sparc-opc.c (sparc_opcodes): Add ultrasparc vis extensions.
853 Mon Apr 22 17:12:35 1996 Doug Evans <dje@blues.cygnus.com>
855 * sparc-dis.c (X_IMM,X_SIMM): New macros.
857 (print_insn_sparc): Merge cases i,I,j together. New cases X,Y.
858 * sparc-opc.c (sparc_opcodes): Use X for 5 bit shift constants,
859 Y for 6 bit shift constants. Rewrite entries for crdcxt, cwrcxt,
860 cpush, cpusha, cpull sparclet insns.
862 Wed Apr 17 14:20:22 1996 Doug Evans <dje@canuck.cygnus.com>
864 * sparc-dis.c (compute_arch_mask): Replace ANSI style def with K&R.
866 Thu Apr 11 17:30:02 1996 Ian Lance Taylor <ian@cygnus.com>
868 * sparc-opc.c: Set F_FBR on floating point branch instructions.
869 Set F_FLOAT on other floating point instructions.
871 Mon Apr 8 17:02:48 1996 Michael Meissner <meissner@tiktok.cygnus.com>
873 * ppc-opc.c (PPC860): Macro for 860/821 specific instructions and
875 (powerpc_opcodes): Add 860/821 specific SPRs.
877 Mon Apr 8 14:00:44 1996 Ian Lance Taylor <ian@cygnus.com>
879 * configure.in: Permit --enable-shared to specify a list of
880 directories. Set and substitute BFD_PICLIST.
881 * configure: Rebuild.
882 * Makefile.in (BFD_PICLIST): Rename from BFD_LIST. Change all
883 uses. Set to @BFD_PICLIST@.
885 Fri Apr 5 17:12:27 1996 Jeffrey A Law (law@cygnus.com)
887 * h8300-dis.c (bfd_h8_disassemble): Use "bit" for L_3 immediates,
888 not "abs", which may be needed for the absolute in something
889 like btst #0,@10:8. Print L_3 immediates separately from other
890 immediates. Change ABSMOV reference to ABS8MEM.
892 Wed Apr 3 10:40:45 1996 Doug Evans <dje@canuck.cygnus.com>
894 * sparc-dis.c (opcodes_initialized): Move inside print_insn_sparc.
895 (current_arch_mask): New static global.
896 (compute_arch_mask): New static function.
897 (print_insn_sparc): Delete sparc_v9_p. New static local
898 current_mach. Resort opcode table if current_mach changes.
899 Generalize "insn not supported" test.
900 (compare_opcodes): Prefer supported opcodes to nonsupported ones.
901 Delete test for v9/!v9.
902 * sparc-opc.c (MASK_*): Use SPARC_OPCODE_ARCH_MASK.
904 (brfc): Split into CBR and FBR for coprocessor/fp branches.
905 (brfcx): Renamed to FBRX.
906 (condfc): Renamed to CONDFC. Pass v6notlet to CBR (standard
907 coprocessor mnemonics are not supported on the sparclet).
908 (condf): Renamed to CONDF.
909 (SLCBCC2): Delete F_ALIAS flag.
911 Sat Mar 30 21:45:59 1996 Doug Evans <dje@canuck.cygnus.com>
913 * sparc-opc.c (sparc_opcodes): rd must be 0 for
914 mov foo,{%y,%psr,%wim,%tbr}. Support mov foo,%asrX.
916 Fri Mar 29 13:02:40 1996 Ian Lance Taylor <ian@cygnus.com>
918 * Makefile.in (config.status): Depend upon BFD VERSION file, so
919 that the shared library version number is set correctly.
921 Tue Mar 26 15:47:14 1996 Ian Lance Taylor <ian@cygnus.com>
923 * configure.in: Use AC_CHECK_TOOL to find ar and ranlib. From
924 Miles Bader <miles@gnu.ai.mit.edu>.
925 * configure: Rebuild.
927 Sat Mar 16 13:04:07 1996 Fred Fish <fnf@cygnus.com>
929 * z8kgen.c (internal, gas): Call xmalloc rather than unchecked
932 Tue Mar 12 12:14:10 1996 Ian Lance Taylor <ian@cygnus.com>
934 * configure: Rebuild with autoconf 2.8.
936 Thu Mar 7 15:11:10 1996 Doug Evans <dje@charmed.cygnus.com>
938 * sparc-dis.c (print_insn_sparc): Handle 'O' operand char like 'r'.
939 * sparc-opc.c (sparc_opcodes): Use 'O' operand char for `neg reg'.
941 Tue Mar 5 15:51:57 1996 Ian Lance Taylor <ian@cygnus.com>
943 * configure.in: Don't set SHLIB or SHLINK to an empty string,
944 since they appear as targets in Makefile.in.
945 * configure: Rebuild.
947 Mon Feb 26 13:03:40 1996 Stan Shebs <shebs@andros.cygnus.com>
949 * mpw-make.sed: Edit out shared library support bits.
951 Tue Feb 20 20:48:28 1996 Doug Evans <dje@charmed.cygnus.com>
953 * sparc-opc.c (v8,v6notv9): Add MASK_SPARCLET.
954 (sparc_opcode_archs): Add MASK_V8 to sparclet entry.
955 (sparc_opcodes): Add sparclet insns.
956 (sparclet_cpreg_table): New static local.
957 (sparc_{encode,decode}_sparclet_cpreg): New functions.
958 * sparc-dis.c (print_insn_sparc): Handle sparclet cpregs.
960 Tue Feb 20 11:02:44 1996 Alan Modra <alan@mullet.Levels.UniSA.Edu.Au>
962 * i386-dis.c (index16): New static variable.
963 (putop): Print jecxz for 32 bit case, jcxz for 16 bit, not the
965 (OP_indirE): Return result of OP_E.
966 (OP_E): Check for 16 bit addressing mode, and disassemble
967 correctly. Optimised 32 bit case a little. Don't print
968 "(base,index,scale)" when sib specifies only an offset.
970 Mon Feb 19 12:32:17 1996 Ian Lance Taylor <ian@cygnus.com>
972 * configure.in: Set and substitute SHLIB_DEP.
973 * configure: Rebuild.
974 * Makefile.in (SHLIB_DEP): New variable.
975 (LIBIBERTY_LISTS, BFD_LIST): New variables.
976 (stamp-piclist): Depend upon LIBIBERTY_LISTS and BFD_LIST. If
977 COMMON_SHLIB, add them to piclist with appropriate modifications.
978 ($(SHLIB)): Depend upon $(SHLIB_DEP). Don't check COMMON_SHLIB
979 here: just use piclist.
981 Mon Feb 19 02:03:50 1996 Doug Evans <dje@charmed.cygnus.com>
983 * sparc-dis.c (MASK_V9,V9_ONLY_P,V9_P): Define.
984 (print_insn_sparc): Rewrite v9/not-v9 tests.
985 (compare_opcodes): Likewise.
986 * sparc-opc.c (MASK_<ARCH>): Define.
987 (v6,v7,v8,sparclite,v9,v9a): Redefine.
988 (sparclet,v6notv9): Define.
989 (sparc_opcode_archs): Delete member `conflicts'. Add `supported'.
990 (sparc_opcodes): Delete F_NOTV9, use v6notv9 instead.
992 Thu Feb 15 14:45:05 1996 Ian Lance Taylor <ian@cygnus.com>
994 * configure.in: Call AC_PROG_CC before configure.host.
995 * configure: Rebuild.
997 * Makefile.in (SONAME): Remove leading ../bfd/ from $(SHLIB).
999 Wed Feb 14 19:01:27 1996 Alan Modra <alan@spri.levels.unisa.edu.au>
1001 * i386-dis.c (onebyte_has_modrm): New static array.
1002 (twobyte_has_modrm): New static array.
1003 (print_insn_i386): Only fetch the mod/reg/rm byte if it is needed.
1005 Tue Feb 13 15:15:01 1996 Ian Lance Taylor <ian@cygnus.com>
1007 * Makefile.in ($(SHLINK)): Check ts against $(SHLIB), not
1010 Mon Feb 12 16:26:06 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1012 * ppc-opc.c (PPC): Undef, so default defination on Windows NT
1015 Wed Feb 7 13:59:54 1996 Ian Lance Taylor <ian@cygnus.com>
1017 * m68k-opc.c (m68k_opcodes): The bkpt instruction is supported on
1018 m68010up, not just m68020up | cpu32.
1020 * Makefile.in (SONAME): New variable.
1021 ($(SHLINK)): Make a link to the transformed name, as well.
1022 (stamp-tshlink): New target.
1023 (install): Skip stamp-tshlink during install.
1025 Tue Feb 6 12:28:54 1996 Ian Lance Taylor <ian@cygnus.com>
1027 * configure.in: Call AC_ARG_PROGRAM.
1028 * configure: Rebuild.
1029 * Makefile.in (program_transform_name): New variable.
1030 (install): Transform library name before installing it.
1032 Mon Feb 5 16:14:42 1996 Ian Lance Taylor <ian@cygnus.com>
1034 * i960-dis.c (mem): Add HX dcinva instruction.
1036 Support for building as a shared library, based on patches from
1037 Alan Modra <alan@spri.levels.unisa.edu.au>:
1038 * configure.in: Add AC_ARG_ENABLE for shared and commonbfdlib.
1039 New substitutions: ALLLIBS, PICFLAG, SHLIB, SHLIB_CC,
1040 SHLIB_CFLAGS, COMMON_SHLIB, SHLINK.
1041 * configure: Rebuild.
1042 * Makefile.in (ALLLIBS): New variable.
1043 (PICFLAG, SHLIB, SHLIB_CC, SHLIB_CFLAGS): New variables.
1044 (COMMON_SHLIB, SHLINK): New variables.
1045 (.c.o): If PICFLAG is set, compile twice, once PIC, once normal.
1046 (STAGESTUFF): Remove variable.
1047 (all): Depend upon $(ALLLIBS) rather than $(TARGETLIB).
1048 (stamp-piclist, piclist): New targets.
1049 ($(SHLIB), $(SHLINK)): New targets.
1050 ($(OFILES)): Depend upon stamp-picdir.
1051 (disassemble.o): Build twice if PICFLAG is set.
1052 (MOSTLYCLEAN): Add pic/*.o.
1053 (clean): Remove $(SHLIB), $(SHLINK), piclist, and stamp-piclist.
1054 (distclean): Remove pic and stamp-picdir.
1055 (install): Install shared libraries.
1056 (stamp-picdir): New target.
1058 Fri Feb 2 17:15:25 1996 Doug Evans <dje@charmed.cygnus.com>
1060 * sparc-dis.c (print_insn_sparc): Delete DISASM_RAW_INSN support.
1061 Print unknown instruction as "unknown", rather than in hex.
1063 Tue Jan 30 14:06:08 1996 Ian Lance Taylor <ian@cygnus.com>
1065 * dis-buf.c: Include "sysdep.h" before "dis-asm.h".
1067 Thu Jan 25 20:24:07 1996 Doug Evans <dje@charmed.cygnus.com>
1069 * sparc-opc.c (sparc_opcode_archs): Mark v8/sparclite as conflicting.
1071 Thu Jan 25 11:56:49 1996 Ian Lance Taylor <ian@cygnus.com>
1073 * i386-dis.c (print_insn_i386): Only fetch the mod/reg/rm byte
1074 when necessary. From Ulrich Drepper
1075 <drepper@myware.rz.uni-karlsruhe.de>.
1077 Thu Jan 25 03:39:10 1996 Doug Evans <dje@charmed.cygnus.com>
1079 * sparc-dis.c (print_insn_sparc): NUMOPCODES replaced with
1080 sparc_num_opcodes. Update architecture enum values.
1081 * sparc-opc.c (sparc_opcode_archs): Replaces architecture_pname.
1082 (sparc_opcode_lookup_arch): New function.
1083 (sparc_num_opcodes): Renamed from bfd_sparc_num_opcodes.
1084 (sparc_opcodes): Add v9a shutdown insn.
1086 Mon Jan 22 08:29:59 1996 Doug Evans <dje@charmed.cygnus.com>
1088 * sparc-dis.c (print_insn_sparc): Renamed from print_insn.
1089 If DISASM_RAW_INSN, print insn in hex. Handle v9a as opcode
1091 (print_insn_sparc64): Deleted.
1092 * disassemble.c (disassembler, case bfd_arch_sparc): Always use
1095 * sparc-opc.c (architecture_pname): Add v9a.
1097 Fri Jan 12 14:35:58 1996 David Mosberger-Tang <davidm@AZStarNet.com>
1099 * alpha-opc.h (alpha_insn_set): VAX floating point opcode was
1100 incorrectly defined as 0x16 when it should be 0x15.
1101 (FLOAT_FORMAT_MASK): function code is 11 bits, not just 7 bits!
1102 (alpha_insn_set): added cvtst and cvttq float ops. Also added
1103 excb (exception barrier) which is defined in the Alpha
1104 Architecture Handbook version 2.
1105 * alpha-dis.c (print_insn_alpha): Fixed special-case decoding for
1106 OPERATE_FORMAT_CODE type instructions. The bug caused mulq to be
1107 disassembled as or, for example.
1109 Wed Jan 10 12:37:22 1996 Ian Lance Taylor <ian@cygnus.com>
1111 * mips-dis.c (print_insn_arg): Print cases 'i' and 'u' in hex.
1112 (_print_insn_mips): Change i from int to unsigned int.
1114 Thu Jan 4 17:21:10 1996 David Edelsohn <edelsohn@mhpcc.edu>
1116 * ppc-opc.c (powerpc_opcodes): tlbi POWER opcode form different
1117 from tlbie PowerPC opcode. Add PPC603 tlbld and tlbli.
1119 Thu Dec 28 13:29:19 1995 John Hassey <hassey@rtp.dg.com>
1121 * i386-dis.c: Added Pentium Pro instructions.
1123 Tue Dec 19 22:56:35 1995 Michael Meissner <meissner@tiktok.cygnus.com>
1125 * ppc-opc.c (fsqrt{,.}): Duplicate for PowerPC in addition to
1128 Fri Dec 15 14:14:15 1995 J.T. Conklin <jtc@rtl.cygnus.com>
1130 * sh-opc.h (sh_nibble_type): Added REG_B.
1131 (sh_arg_type): Added A_REG_B.
1132 (sh_table): Added pref and bank reg versions of ldc, ldc.l, stc
1134 * sh-dis.c (print_insn_shx): Added cases for REG_B and A_REG_B.
1136 Fri Dec 15 16:44:31 1995 Ian Lance Taylor <ian@cygnus.com>
1138 * disassemble.c (disassembler): Use new bfd_big_endian macro.
1140 Tue Dec 12 12:22:24 1995 Ian Lance Taylor <ian@cygnus.com>
1142 * Makefile.in (distclean): Remove stamp-h. From Ronald
1143 F. Guilmette <rfg@monkeys.com>.
1145 Tue Dec 5 13:42:44 1995 Stan Shebs <shebs@andros.cygnus.com>
1147 From David Mosberger-Tang <davidm@azstarnet.com>:
1148 * alpha-dis.c (print_insn_alpha): fixed decoding of cpys
1151 Mon Dec 4 12:29:05 1995 J.T. Conklin <jtc@rtl.cygnus.com>
1153 * sh-opc.h (sh_arg_type): Added A_SSR and A_SPC.
1154 (sh_table): Added many SH3 opcodes.
1155 * sh-dis.c (print_insn_shx): Added cases for A_SSR and A_SPC.
1157 Fri Dec 1 07:42:18 1995 Michael Meissner <meissner@tiktok.cygnus.com>
1159 * ppc-opc.c (subfc., subfco): Mark this PPCCOM, not PPC.
1160 (subco,subco.): Mark this PPC, not PPCCOM.
1162 Mon Nov 27 13:09:52 1995 Ian Lance Taylor <ian@cygnus.com>
1164 * configure: Rebuild with autoconf 2.7.
1166 Tue Nov 21 18:28:06 1995 Ian Lance Taylor <ian@cygnus.com>
1168 * configure: Rebuild with autoconf 2.6.
1170 Wed Nov 15 19:02:53 1995 Ken Raeburn <raeburn@cygnus.com>
1172 * configure.in: Sort list of architectures. Accept but do nothing
1173 for alliant, convex, pyramid, romp, and tahoe.
1175 Wed Nov 8 20:18:59 1995 Ian Lance Taylor <ian@cygnus.com>
1177 * a29k-dis.c (print_special): Change num to unsigned int.
1179 Wed Nov 8 20:10:35 1995 Eric Freudenthal <freudenthal@nyu.edu>
1181 * a29k-dis.c (print_insn): Cast insn24 to unsigned long when
1184 Tue Nov 7 15:21:06 1995 Ian Lance Taylor <ian@cygnus.com>
1186 * configure.in: Call AC_CHECK_PROG to find and cache AR.
1187 * configure: Rebuilt.
1189 Mon Nov 6 17:39:47 1995 Harry Dolan <dolan@ssd.intel.com>
1191 * configure.in: Add case for bfd_i860_arch.
1192 * configure: Rebuild.
1194 Fri Nov 3 12:45:31 1995 Ian Lance Taylor <ian@cygnus.com>
1196 * m68k-opc.c (m68k_opcodes): Correct fmoveml operands.
1197 * m68k-dis.c (NEXTSINGLE): Change i to unsigned int.
1198 (NEXTDOUBLE): Likewise.
1199 (print_insn_m68k): Don't match fmoveml if there is more than one
1200 register in the list.
1201 (print_insn_arg): Handle a place of '8' for a type of 'L'.
1203 Thu Nov 2 23:06:33 1995 Ian Lance Taylor <ian@cygnus.com>
1205 * m68k-opc.c: Use #W rather than #w.
1206 * m68k-dis.c (print_insn_arg): Handle new 'W' place.
1208 Wed Nov 1 13:30:24 1995 Ian Lance Taylor <ian@cygnus.com>
1210 * m68k-opc.c (m68k_opcode_aliases): Add dbfw as an alias for dbf,
1211 and likewise for all the dbxx opcodes.
1213 Mon Oct 30 20:50:40 1995 Fred Fish <fnf@cygnus.com>
1215 * arc-dis.c: Include elf-bfd.h rather than libelf.h.
1217 Mon Oct 23 11:11:34 1995 James G. Smith <jsmith@pasanda.cygnus.co.uk>
1219 * mips-opc.c: Added shorthand (V1) for INSN_4100 manifest. Added
1220 the VR4100 specific instructions to the mips_opcodes structure.
1222 Thu Oct 19 11:05:23 1995 Stan Shebs <shebs@andros.cygnus.com>
1224 * mpw-config.in, mpw-make.sed: Remove ugly workaround for
1225 ugly Metrowerks bug in CW6, is fixed in CW7.
1227 Mon Oct 16 12:59:01 1995 Michael Meissner <meissner@tiktok.cygnus.com>
1229 * ppc-opc.c (whole file): Add flags for common/any support.
1231 Tue Oct 10 11:06:07 1995 Fred Fish <fnf@cygnus.com>
1233 * Makefile.in (BISON): Remove macro.
1234 (FLAGS_TO_PASS): Remove BISON.
1236 Fri Oct 6 16:26:45 1995 Ken Raeburn <raeburn@cygnus.com>
1238 Mon Sep 25 22:49:32 1995 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1240 * m68k-dis.c (print_insn_m68k): Recognize all two-word
1241 instructions that take no args by looking at the match mask.
1242 (print_insn_arg): Always print "%" before register names.
1243 [case 'c']: Use "nc" for the no-cache case, as recognized by gas.
1244 [case '_']: Don't print "@#" before address.
1245 [case 'J']: Use "%s" as format string, not register name.
1246 [case 'B']: Treat place == 'C' like 'l' and 'L'.
1248 Thu Oct 5 22:16:20 1995 Ken Raeburn <raeburn@cygnus.com>
1250 * i386-dis.c: Describe cmpxchg8b operand, and spell the opcode
1253 Tue Oct 3 08:30:20 1995 steve chamberlain <sac@slash.cygnus.com>
1255 From David Mosberger-Tang <davidm@azstarnet.com>
1257 * alpha-opc.h (MEMORY_FUNCTION_FORMAT_MASK): added.
1258 (alpha_insn_set): added definitions for VAX floating point
1259 instructions (Unix compilers don't generate these, but handcoded
1260 assembly might still use them).
1262 * alpha-dis.c (print_insn_alpha): added support for disassembling
1263 the miscellaneous instructions in the Alpha instruction set.
1265 Tue Sep 26 18:47:20 1995 Stan Shebs <shebs@andros.cygnus.com>
1267 * mpw-config.in: Add m68k-opc.c.o to BFD_MACHINES for m68k,
1268 no longer create sysdep.h, sed ppc-opc.c to work around a
1269 serious Metrowerks C bug.
1270 * mpw-make.in: Remove.
1271 * mpw-make.sed: New file, used by mpw-configure to edit
1272 Makefile.in into an MPW makefile.
1274 Wed Sep 20 12:55:28 1995 Ian Lance Taylor <ian@cygnus.com>
1276 * Makefile.in (maintainer-clean): New synonym for realclean.
1278 Tue Sep 19 15:28:36 1995 Ian Lance Taylor <ian@cygnus.com>
1280 * m68k-opc.c: Split pmove patterns which use 'P' into patterns
1281 which use '0', '1', and '2' instead. Specify the proper size for
1282 a pmove immediate operand. Correct the pmovefd patterns to be
1283 moves to a register, not from a register.
1284 * m68k-dis.c (print_insn_arg): Replace 'P' with '0', '1', '2'.
1286 Thu Sep 14 11:58:22 1995 Doug Evans <dje@canuck.cygnus.com>
1288 * sparc-opc.c (sparc_opcodes): Mark all insns that reference
1289 %psr, %wim, %tbr as F_NOTV9.
1291 Fri Sep 8 01:07:38 1995 Ian Lance Taylor <ian@cygnus.com>
1293 * Makefile.in (Makefile): Just rebuild Makefile when running
1295 (config.h, stamp-h): New targets.
1296 * configure.in: Call AC_CONFIG_HEADER and AC_CANONICAL_SYSTEM
1297 earlier. Don't bother to call AC_ARG_PROGRAM. Touch stamp-h when
1298 rebuilding config.h.
1299 * configure: Rebuild.
1301 * mips-opc.c: Change unaligned loads and stores with "t,A"
1302 operands to use "t,A(b)".
1304 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
1306 * sh-dis.c (print_insn_shx): Add F_FR0 support.
1308 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
1310 * sh-dis.c (print_insn_shx): Change loop over op->arg[n] to iterate
1311 until 3 instead of until 2.
1313 Wed Sep 6 21:21:33 1995 Ian Lance Taylor <ian@cygnus.com>
1315 * Makefile.in (ALL_CFLAGS): Define.
1316 (.c.o, disassemble.o): Use $(ALL_CFLAGS).
1317 (MOSTLYCLEAN): Add config.log.
1318 (distclean): Don't remove config.log.
1319 * configure.in: Substitute HDEFINES.
1320 * configure: Rebuild.
1322 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
1324 * sh-opc.h (sh_arg_type): Add F_FR0.
1325 (sh_table, case fmac): Add F_FR0 as first argument.
1327 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
1329 * sh-opc.h (sh_opcode_info): Increase arg array size to 4.
1331 Tue Sep 5 18:28:10 1995 Doug Evans <dje@canuck.cygnus.com>
1333 * sparc-dis.c: Remove all references to NO_V9.
1335 Tue Sep 5 20:03:26 1995 Ian Lance Taylor <ian@cygnus.com>
1337 * aclocal.m4: Just include ../bfd/aclocal.m4.
1338 * configure: Rebuild.
1340 Tue Sep 5 16:09:59 1995 Doug Evans <dje@canuck.cygnus.com>
1342 * sparc-dis.c (X_DISP19): Define.
1343 (print_insn, case 'G'): Use it.
1344 (print_insn, case 'L'): Sign extend displacement.
1346 Mon Sep 4 14:28:46 1995 Ian Lance Taylor <ian@cygnus.com>
1348 * configure.in: Run ../bfd/configure.host before AC_PROG_CC.
1349 Subsitute CFLAGS and AR. Call AC_PROG_INSTALL. Don't substitute
1350 host_makefile_frag or frags.
1351 * aclocal.m4: New file.
1352 * configure: Rebuild.
1353 * Makefile.in (INSTALL): Set to @INSTALL@.
1354 (INSTALL_PROGRAM): Set to @INSTALL_PROGRAM@.
1355 (INSTALL_DATA): Set to @INSTALL_DATA@.
1357 (AR_FLAGS): Set to rc rather than qc.
1358 (CC): Define as @CC@.
1359 (CFLAGS): Set to @CFLAGS@.
1360 (@host_makefile_frag@): Remove.
1361 (config.status): Remove dependency upon @frags@.
1363 * configure.in: ../bfd/config.bfd now just sets shell variables.
1364 Use them rather than looking through target Makefile fragments.
1365 * configure: Rebuild.
1367 Thu Aug 31 12:35:32 1995 Jim Wilson <wilson@chestnut.cygnus.com>
1369 * sh-opc.h (ftrc): Change FPUL_N to FPUL_M.
1371 Wed Aug 30 13:52:28 1995 Doug Evans <dje@canuck.cygnus.com>
1373 * sparc-opc.c (sparc_opcodes): Delete duplicate wr %y insn.
1374 Add clrx, iprefetch, signx, clruw, cas, casl, casx, casxl synthetic
1377 * sparc-opc.c (sparc_opcodes): Fix prefetcha insn.
1378 (lookup_{name,value}): New functions.
1379 (prefetch_table): New static local.
1380 (sparc_{encode,decode}_prefetch): New functions.
1381 * sparc-dis.c (print_insn): Handle '*' arg (prefetch function).
1383 Wed Aug 30 11:11:58 1995 Jim Wilson <wilson@chestnut.cygnus.com>
1385 * sh-opc.h: Add blank lines to improve readabililty of sh3e
1388 Wed Aug 30 11:09:38 1995 Jim Wilson <wilson@chestnut.cygnus.com>
1390 * sh-dis.c: Correct comment on first line of file.
1392 Tue Aug 29 15:37:18 1995 Doug Evans <dje@canuck.cygnus.com>
1394 * disassemble.c (disassembler): Handle bfd_mach_sparc64.
1396 * sparc-opc.c (asi, membar): New static locals.
1397 (sparc_{encode,decode}_{asi,membar}): New functions.
1398 (sparc_opcodes, membar insn): Fix.
1399 * sparc-dis.c (print_insn): Call sparc_decode_asi.
1400 Support decoding of membar masks.
1403 Sat Aug 26 21:22:48 1995 Ian Lance Taylor <ian@cygnus.com>
1405 * m68k-opc.c (m68k_opcode_aliases): Add br, brs, brb, brw, brl.
1407 Mon Aug 21 17:33:36 1995 Ian Lance Taylor <ian@cygnus.com>
1409 * m68k-opc.c (m68k_opcode_aliases): Add bhib as an alias for bhis,
1410 and likewise for the other branches. Add bhs as an alias for bcc,
1411 and likewise for the size variants. Add dbhs as an alias for
1414 Fri Aug 11 13:40:24 1995 Jeff Law (law@snake.cs.utah.edu)
1416 * sh-opc.h (FP sts instructions): Update to match reality.
1418 Mon Aug 7 16:12:58 1995 Ian Lance Taylor <ian@cygnus.com>
1420 * m68k-dis.c: (fpcr_names): Add % before all register names.
1421 (reg_names): Likewise.
1422 (print_insn_arg): Don't explicitly print % before register names.
1423 Add % before register names in static array names. In case 'r',
1424 print data registers as `@(Dn)', not `Dn@'. When printing a
1425 memory address, don't print @# before it.
1426 (print_indexed): Change base_disp and outer_disp from int to
1427 bfd_vma. Print using MIT syntax, not mutant invalid Motorola
1428 syntax. Sign extend 8 byte displacement correctly.
1429 (print_base): Print using MIT syntax. Print zpc when appropriate.
1430 Change parameter disp from int to bfd_vma.
1432 * m68k-opc.c (m68k_opcode_aliases): Add jsrl and jsrs as aliases
1435 Mon Aug 7 02:21:40 1995 Jeff Law (law@snake.cs.utah.edu)
1437 * sh-dis.c (print_insn_shx): Handle new operand types F_REG_N,
1438 F_REG_M, FPSCR_M, FPSCR_N, FPUL_M and FPUL_N.
1439 * sh-opc.h (sh_arg_type): Add new operand types.
1440 (sh_table): Add new opcodes from SH3E Floating Point ISA.
1442 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
1444 * Makefile.in (distclean): Remove generated file config.h.
1446 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
1448 * Makefile.in (distclean): Remove generated file config.h.
1450 Wed Aug 2 18:33:40 1995 Ian Lance Taylor <ian@cygnus.com>
1452 * m68k-opc.c: New file, holding tables from include/opcode/m68k.h.
1454 * m68k-dis.c: Remove BREAK_UP_BIG_DECL stuff.
1456 (print_insn_m68k): Change d to be const. Use m68k_numopcodes
1457 rather than numopcodes. Use m68k_opcodes rather than removed
1458 opcode function. Don't check F_ALIAS.
1459 (print_insn_arg): Change first parameter to be const char *.
1460 * Makefile.in (ALL_MACHINES): Add m68k-opc.o.
1461 (m68k-opc.o): New target.
1462 * configure.in: Build m68k-opc.o for bfd_m68k_arch.
1463 * configure: Rebuild.
1465 Wed Aug 2 08:23:38 1995 Doug Evans <dje@canuck.cygnus.com>
1467 * sparc-dis.c (HASH_SIZE, HASH_INSN): Define.
1468 (opcode_bits, opcode_hash_table): New variables.
1469 (opcodes_initialized): Renamed from opcodes_sorted.
1470 (build_hash_table): New function.
1471 (is_delayed_branch): Use hash table.
1472 (print_insn): Renamed from print_insn_sparc, made static.
1473 Build and use hash table. If !sparc64, ignore sparc64 insns,
1474 and vice-versa if sparc64.
1475 (print_insn_sparc, print_insn_sparc64): New functions.
1476 (compare_opcodes): Move sparc64 opcodes to end.
1477 Print commutative insns with constant second.
1478 * sparc-opc.c (all non-v9 insns): Use flag F_NOTV9 instead of F_ALIAS.
1480 Tue Aug 1 00:12:49 1995 Ian Lance Taylor <ian@cygnus.com>
1482 * sh-dis.c (print_insn_shx): Remove unused local dslot. Use
1483 print_address_func for A_BDISP12 and A_BDISP8. Correct test which
1484 avoids printing a delay slot in a delay slot.
1485 * sh-opc.h (sh_table): Fully bracket last entry.
1487 Mon Jul 31 12:04:47 1995 Doug Evans <dje@canuck.cygnus.com>
1489 * sparc-opc.c (sllx, srax, srlx): Fix disassembly.
1491 Wed Jul 12 00:59:34 1995 Ken Raeburn <raeburn@kr-pc.cygnus.com>
1493 * configure.in: Get host_makefile_frag from ${srcdir}.
1495 * configure.in: Autoconfiscated. Check for string[s].h. Create
1496 config.h from config.in. Don't set up sysdep.h link.
1497 * sysdep.h: New file.
1498 * configure, config.in: New files, generated from configure.in.
1499 * Makefile.in: Updated to be processed autoconf-style.
1500 (distclean): Keep sysdep.h. Remove config.log and config.cache.
1501 (Makefile): Depend on config.status.
1502 (config.status): New rule.
1503 * configure.bat: Update Makefile substitutions.
1505 Tue Jul 11 14:23:37 1995 Jeff Spiegel <jeffs@lsil.com>
1507 * mips-opc.c (L1): Define.
1508 (mips_opcodes): Add R4010 instructions: flushi, flushd, flushid,
1509 addciu, madd, maddu, ffc, ffs, msub, msubu, selsi, selsr, waiti,
1512 Tue Jul 11 11:49:49 1995 Ian Lance Taylor <ian@cygnus.com>
1514 * mips-opc.c (mips_opcodes): For the move pseudo-op, prefer daddu
1515 if ISA 3 and addu otherwise, replacing or, since some MIPS chips
1516 have multiple add units but only a single logical unit.
1518 * ppc-opc.c (powerpc_operands): Change CR to use a bitsize of 3,
1519 shifted by 18, without any insertion or extraction function.
1520 (insert_cr, extract_cr): Remove.
1523 Mon Jul 3 11:54:31 1995 Ian Lance Taylor <ian@cygnus.com>
1525 * Makefile.in (ALL_MACHINES): Add arc-dis.o and arc-opc.o.
1528 Wed Jun 21 20:05:39 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
1530 * m68k-dis.c (print_insn_arg, print_indexed): Print "%" before
1533 Thu Jun 15 17:23:31 1995 Stan Shebs <shebs@andros.cygnus.com>
1535 * mpw-config.in: Add sh and i386 configs, remove sparc config.
1536 * sh-opc.h: Add copyright.
1538 Mon Jun 5 03:30:43 1995 Ken Raeburn <raeburn@kr-laptop.cygnus.com>
1540 * Makefile.in (crunch-m68k): Delete extra target accidentally
1541 checked in a while ago.
1543 Wed May 24 16:22:13 1995 Jim Wilson <wilson@chestnut.cygnus.com>
1545 * sh-opc.h (sh_table): Add SH3 support.
1547 Wed May 24 14:16:08 1995 Steve Chamberlain <sac@slash.cygnus.com>
1549 * sh-opc.h: Added bsrf and braf.
1551 Wed May 10 14:28:16 1995 Richard Earnshaw (rearnsha@armltd.co.uk)
1553 * arm-opc.h (arm_opcodes): Add 64-bit multiply patterns. Delete
1554 bogus [ls]fm{ea,fd} patterns.
1556 * arm-opc.h (arm_opcodes): Correct typos in stm, ldm, std, and ldc.
1557 * arm-dis.c (print_insn_arm): Make GIVEN a parameter, don't try and
1558 initialize it from memory. Make function static.
1559 (print_insn_{big,little}_arm): New functions.
1560 * disassemble.c (disassembler, case bfd_arch_arm): Disassemble for
1561 the correct endianness.
1564 Sat Apr 29 23:20:05 1995 Doug Evans <dje@chestnut.cygnus.com>
1566 * arc-opc.c (arc_opcodes): Add ARC_OPCODE_CONDITIONAL_BRANCH flag.
1567 (arc_suffixes): Use ARC_DELAY_{NONE,NORMAL,JUMP}.
1570 Mon Apr 24 14:18:05 1995 Jason Molenda (crash@phydeaux.cygnus.com>
1572 * sh-opc.h (sh_nibble_type, sh_arg_type): remove trailing , from
1575 Wed Apr 19 14:07:03 1995 Michael Meissner <meissner@tiktok.cygnus.com>
1577 * m68k-dis.c (opcode): Finish change made by Kung Hsu on April
1578 17th, so that it builds again using GCC as the compiler.
1580 Tue Apr 18 12:14:51 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
1582 * mips-dis.c (print_insn_little_mips): Cast return value from
1583 bfd_getl32 from bfd_vma to unsigned long, because _print_insn_mips
1584 expects an unsigned long, and that might be fewer words of
1585 argument storage (e.g., if bfd_vma is long long on a 32-bit
1587 (print_insn_big_mips): Likewise with bfd_getb32 value.
1588 (_print_insn_mips): Now static.
1590 Mon Apr 17 12:23:28 1995 Kung Hsu <kung@rtl.cygnus.com>
1592 * m68k-dis.c: Take out #define BREAK_UP_BIG_DECL kludge, because
1593 gcc memory hog problem with initializer is fixed.
1596 Wed Apr 12 09:04:12 1995 Doug Evans <dje@canuck.cygnus.com>
1598 * arc-opc.c (NULL): Define.
1599 (arc_operands, insn fields u,s): Delete.
1600 (arc_operands, insn fields a,b,c): Mark as signed.
1601 (arc_opcodes): No longer const, links computed at run-time.
1602 (arc_opcodes, mac/mul insns): Breakout suffixes as we don't handle
1603 suffixes that affect the insn code.
1604 (arc_opcodes): Resort table to macros are first.
1605 (arc_opcodes, ld [b,c] entry): Add %Q to prevent shimms.
1606 (arc_opcodes, st [b] entry): Likewise.
1607 (arc_opcodes, st [b,d] entry): Fix mask, value.
1608 (arc_reg_names): Add entries for r29, r30, r31, r60.
1609 (opcode_map, icode_map): New static globals.
1610 (arc_opcode_init_tables): Initialize them.
1611 (arc_opcode_lookup_asm, arc_opcode_lookup_dis): New functions.
1612 (insert_shimmoffset): Signal error if register present.
1614 * arc-dis.c (print_insn): Call arc_opcode_lookup_dis.
1617 Mon Apr 10 15:55:01 1995 Stan Shebs <shebs@andros.cygnus.com>
1619 Merge in support for Mac MPW as a host.
1620 (Old change descriptions retained for informational value.)
1622 * mpw-config.in (archname): Compute from the config.
1623 (BFD_MACHINES, ARCHDEFS): Put into mk.tmp.
1625 * mpw-config.in (target_arch): Compute from canonical target.
1626 (m68k, mips, powerpc, sparc): Add architectures.
1627 * mpw-make.in (disassemble.c.o): Add.
1628 (ALL_CFLAGS): Remove special flags (-mc68020 -mc68881 -model far).
1630 * mpw-config.in (BFD_MACHINES): Set to a default value.
1631 * mpw-make.in (BFD_MACHINES): Remove wired-in value.
1633 * mpw-make.in (CSEARCH): Add extra-include to search path.
1635 * mpw-config.in (varargs.h): Don't create.
1636 (sysdep.h): Create using forward-include.
1637 * mpw-make.in (CSEARCH): Add include/mpw to search path.
1639 * mpw-config.in: New file, MPW version of configure.in.
1640 * mpw-make.in: New file, MPW version of Makefile.in.
1643 Thu Apr 6 20:36:08 1995 Doug Evans <dje@chestnut.cygnus.com>
1645 * arc-dis.c (print_insn): New parameter `big_p'. Callers updated.
1646 Call arc_get_opcode_mach to map bfd mach number to opcode value.
1647 (print_insn_*): Pass bfd mach number, not opcode version.
1648 * arc-opc.c (arc_get_opcode_mach): New function.
1651 Fri Mar 31 14:23:38 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
1653 * alpha-dis.c (print_insn_alpha): Put empty statement after
1656 Tue Mar 21 10:51:40 1995 Jeff Law (law@snake.cs.utah.edu)
1658 * hppa-dis.c (sign_extend): Delete, redundant with libhppa.h version.
1659 (low_sign_extend): Likewise.
1660 (get_field): Delete unused function.
1661 (set_field, deposit_14, deposit_21): Likewise.
1663 Fri Mar 17 15:55:53 1995 J.T. Conklin <jtc@rtl.cygnus.com>
1665 * i386-dis.c: Support for more pentium opcodes. From Guy Harris
1668 Tue Mar 14 00:52:57 1995 Ken Raeburn (raeburn@kr-pc.cygnus.com)
1670 Sat Feb 11 17:22:41 1995 Klaus Kaempf (kkaempf@didymus.rmi.de)
1672 * alpha-opc.h (OSF_ASMCODE): define
1673 print pal-code names as defined in App C of the
1674 Alpha Architecture Reference Manual
1676 * alpha-dis.c: cleaned up output
1677 print stylized code forms as defined in App A.4.3 of the
1678 Alpha Architecture Reference Manual
1680 Wed Mar 8 15:21:14 1995 Ian Lance Taylor <ian@cygnus.com>
1682 * mips-opc.c: Add new mips4 instructions. Don't set INSN_RFE for
1684 * mips-dis.c (print_insn_arg): Handle new argument types 'h', 'R',
1687 Wed Mar 8 02:54:05 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
1689 * m68k-dis.c (opcode): New function. Returns address of opcode
1690 table entry given index, even if the opcode table was split to
1691 work around gcc bugs.
1692 (print_insn_m68k): Call opcode instead of referencing m68k_opcodes
1694 (BREAK_UP_BIG_DECL): Make secondary array static and const.
1695 (reg_names): Now const.
1696 (print_insn_arg): Arrays cacheFieldName and names now const.
1697 (print_indexed): Array scales now const.
1700 Tue Mar 7 21:14:14 1995 Doug Evans <dje@chestnut.cygnus.com>
1702 * arc-dis.c (print_insn_arc_base): Split into big and little fns.
1703 (print_insn_arc_{host,graphics,audio}): Likewise.
1704 (print_insn): Add prototype.
1705 (arc_get_disassembler): New arg `big_p'. Return little or big
1706 print fn accordingly.
1707 * arc-opc.c (arc_opcode_init_tables): Init arc_operand_map once.
1708 (arc_opcode_supported): Use ARC_OPCODE_CPU to ignore byte order.
1709 (arc_opval_supported): Likewise.
1710 * disassemble.c (disassembler): Pass big endian flag to
1711 arc_get_disassembler.
1714 Tue Mar 7 16:41:21 1995 Ian Lance Taylor <ian@cygnus.com>
1716 * ppc-opc.c: Sort recently added instructions by minor opcode
1717 number within major opcode number.
1719 Mon Mar 6 10:04:36 1995 Jeff Law (law@snake.cs.utah.edu)
1721 * hppa-dis.c: Include libhppa.h.
1723 Fri Feb 24 19:15:36 1995 Ian Lance Taylor <ian@cygnus.com>
1725 * mips-opc.c: Change dli to use M_DLI, and add dla.
1727 Mon Feb 20 23:54:38 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1729 * Makefile.in (ALL_MACHINES): Add w65-dis.o.
1732 Fri Feb 17 12:42:25 1995 Doug Evans <dje@chestnut.cygnus.com>
1734 * arc-dis.c (arc_get_disassembler): Change argument to int,
1735 one of bfd_mach_arc_xxx. All callers updated.
1738 Thu Feb 16 17:34:41 1995 Ian Lance Taylor <ian@cygnus.com>
1740 * mips-opc.c: Add r4650 mul instruction.
1742 Wed Feb 15 15:45:20 1995 Ian Lance Taylor <ian@cygnus.com>
1744 * mips-opc.c: Add uld and usd macros for unaligned double load and
1747 Tue Feb 14 13:17:37 1995 Michael Meissner <meissner@tiktok.cygnus.com>
1749 * ppc-opc.c (powerpc_opcodes): Add 403GA opcodes rfci, dccci,
1750 mfdcr, mtdcr, icbt, iccci.
1753 Mon Feb 13 11:09:17 1995 Doug Evans <dje@canuck.cygnus.com>
1755 * arc-dis.c (print_insn): Handle ARC_OPERAND_ADDRESS.
1756 * arc-opc.c (arc_operands): New operand 'J' for jump addresses.
1757 ('L' operand): Mark as ARC_OPERAND_ADDRESS.
1758 (arc_opcodes, j insn): Use 'J' operand type, not 'L'.
1759 (arc_opcodes, ld/st insns): Fix address writeback operand letter.
1760 (insert_absaddr): New function.
1762 Thu Feb 9 19:19:23 1995 Doug Evans <dje@canuck.cygnus.com>
1764 * arc-dis.c (print_insn_arc): Rename to print_insn and make static.
1765 New argument `cpu', pass it to arc_opcode_init_tables.
1766 Document byte order dependencies. Ignore unsupported insns.
1767 (arc_get_disassembler): New function.
1768 (print_insn_arc_base, print_insn_arc_host, print_insn_arc_graphics,
1769 print_insn_arc_audio): New functions.
1770 * arc-opc.c (MULTSHIFT operand): Delete.
1771 (UNSIGNED, SATURATION): New operands.
1772 (mac, mul, mul64, mulu64): New insns.
1773 (ext. asl, asr, lsr, ror): Only available on host and graphics cpus.
1774 (padc, padd, pmov, pand, psbc, psub, swap): New insns.
1775 (host,graphics,audio extended and auxiliary regs): Define.
1776 (ss, sc, mh, ml): New suffixes.
1777 (arc_opcode_supported, arc_opval_supported): New functions.
1778 (insert_multshift, extract_multshift): Deleted.
1779 * disassemble.c (disassembler, case bfd_arch_arc): Call
1780 arc_get_disassembler to get disassembler routine.
1783 Thu Feb 9 12:28:13 1995 Stan Shebs <shebs@andros.cygnus.com>
1785 * i960-dis.c (struct tabent, struct sparse_tabent): Change the
1786 signed char fields to shorts, more portable.
1788 Wed Feb 8 17:29:29 1995 Stan Shebs <shebs@andros.cygnus.com>
1790 * i960-dis.c (struct tabent, struct sparse_tabent): Declare the
1791 char fields as signed chars, since they may have negative values.
1793 Mon Feb 6 10:52:06 1995 J.T. Conklin <jtc@rtl.cygnus.com>
1795 * i386-dis.c (dis386_twobyte): Add cpuid, From Charles Hannum
1796 (mycroft@netbsd.org).
1798 Mon Jan 30 12:38:00 1995 Ian Lance Taylor <ian@cygnus.com>
1800 From "Logg, Ed" <elogg@ea.com>:
1801 * ppc-opc.c (extract_bdm): Correct parenthezisation.
1802 * ppc-dis.c (print_insn_powerpc): Print .long before unrecognized
1805 Thu Jan 26 18:32:08 1995 Ian Lance Taylor <ian@cygnus.com>
1807 * ppc-opc.c: Changes based on patch from David Edelsohn
1808 <edelsohn@mhpcc.edu>.
1809 (powerpc_operands): Add operands SPRBAT and SPRG. Split TBR out of
1812 (insert_tbr): New static function.
1813 (extract_tbr): New static function.
1814 (XFXFXM_MASK, XFXM): Define.
1815 (XSPRBAT_MASK, XSPRG_MASK): Define.
1816 (powerpc_opcodes): Add instructions to access special registers by
1817 name. Add mtcr and mftbu.
1819 Tue Jan 17 10:56:43 1995 Ian Lance Taylor <ian@sanguine.cygnus.com>
1821 * mips-opc.c (P3): Define.
1822 (mips_opcodes): Add mad and madu.
1824 Sun Jan 15 16:32:59 1995 Steve Chamberlain <sac@splat>
1826 * configure.in: Add W65 support.
1827 * disassemble.c: Likewise.
1828 * w65-opc.h, w65-dis.c: New files.
1830 Wed Dec 28 22:15:33 1994 Steve Chamberlain (sac@jonny.cygnus.com)
1832 * h8300-dis.c (bfd_h8_disassemble): Add support for 2 bit
1836 Tue Dec 20 10:36:55 1994 Doug Evans <dje@canuck.cygnus.com>
1838 * arc-dis.c (print_insn_arc): Branch offsets are relative to delay
1840 * arc-opc.c (extract_reladdr): New function.
1841 (insert_reladdr): Store address right-shifted by 2.
1844 Tue Dec 20 11:25:12 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
1846 * mips-opc.c: Add dli as a synonym for li.
1849 Mon Dec 19 12:35:51 1994 Doug Evans <dje@canuck.cygnus.com>
1851 * arc-opc.c (insertion fns): Pass pointer to value's table entry.
1853 (extraction fns): Insn argument now array of two words. Return pointer
1854 to value's table entry. All uses changed.
1855 (arc_opcode_lookup_suffix): Exported for arc-dis.c.
1856 (insert_multshift, extract_multshift): New fns.
1857 (arc_operands): Add support for cache bypass suffix. Add support for
1858 predefined aux regs. Modifier bits moved to flags field.
1859 (arc_opcodes): Likewise.
1860 Add mul/mulu/shift insns. Syntax of zero/sign extension insns changed.
1861 New insn rlc. Update to syntax in programmer's manual.
1862 (arc_reg_names): Fix typo in lp_count. Add predefined aux regs.
1863 (arc_suffixes): New synonyms lo,hs for cs,cc. New suffix for cache
1865 (arc_opcode_init_tables): New argument to indicate cpu type.
1866 (insert_reg): Handle predefined aux regs.
1867 (extract_reg): Likewise.
1868 (lookup_register): New fn.
1869 * arc-dis.c (arc_condition_codes): Deleted.
1870 (print_insn_arc): Handle insns with 32 bit immediate constants better.
1871 Clean up modifier handling. Handle predefined aux regs.
1874 Thu Dec 8 18:23:31 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
1876 * alpha-dis.c (print_insn_alpha): Handle call_pal instruction, and
1877 print something for reserved opcode values, even if it won't
1880 * mips-dis.c (_print_insn_mips): When initializing, shift right
1881 and mask, to avoid sign extension problems on the Alpha.
1883 * m68k-dis.c (print_insn_arg, case 'J'): Handle buscr and pcr
1887 Tue Nov 29 18:02:43 1994 Doug Evans <dje@canuck.cygnus.com>
1889 * configure.in: Add ARC support.
1890 * disassemble.c: Likewise.
1891 * arc-dis.c, arc-opc.c: New files.
1894 Wed Nov 23 22:34:51 1994 Steve Chamberlain (sac@jonny.cygnus.com)
1896 * sh-opc.h (mov.l gbr): Get direction right.
1897 * sh-dis.c (print_insn_shx): New function.
1898 (print_insn_shl, print_insn_sh): Call print_insn_shx to
1899 print opcodes with right byte order.
1901 Thu Nov 3 19:32:22 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
1903 * ns32k-dis.c (struct ns32k_option): Renamed from struct option,
1904 to avoid conflicts with getopt.
1906 Mon Oct 31 18:48:10 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
1908 * hppa-dis.c (print_insn_hppa): Read the instruction using
1909 bfd_getb32, so that it works on a little endian or 64 bit host.
1910 Remove unused local variable op.
1912 Tue Oct 25 17:07:57 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
1914 * mips-opc.c: Use or instead of addu for pseudo-op move, since
1915 addu does not work correctly if -mips3.
1917 Wed Oct 19 13:40:16 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
1919 * a29k-dis.c (print_special): Add special register names defined
1920 on 29030, 29040 and 29050.
1921 (print_insn): Handle new operand type 'I'.
1923 Wed Oct 12 11:59:55 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
1925 * Makefile.in (INSTALL): Use top level install.sh script.
1927 Wed Oct 5 19:16:29 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
1929 * sparc-dis.c: Rewrite to use bitfields, rather than a union, so
1930 that it works on a little endian host.
1932 Tue Oct 4 12:14:21 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
1934 * configure.in: Use ${config_shell} when running config.bfd.
1936 Wed Sep 21 18:49:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
1938 * mips-opc.c (mips_opcodes): "dabs" is only available with -mips3.
1940 Thu Sep 15 16:30:22 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
1942 * a29k-dis.c (print_insn): Print the opcode.
1944 Wed Sep 14 17:52:14 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
1946 * mips-opc.c (mips_opcodes): Set WR_t for sc and scd.
1948 Sun Sep 11 22:32:17 1994 Jeff Law (law@snake.cs.utah.edu)
1950 * hppa-dis.c (reg_names): Use r26-r23 for arg0-arg3.
1952 Tue Sep 6 11:37:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
1954 * mips-opc.c: Set INSN_STORE_MEMORY flag for all instructions
1955 which store a value into memory.
1957 Sun Sep 04 17:58:10 1994 Richard Earnshaw (rwe@pegasus.esprit.ec.org)
1959 * configure.in, Makefile.in, disassemble.c: Add support for the ARM.
1960 * arm-dis.c, arm-opc.h: New files.
1962 Fri Aug 5 14:00:05 1994 Stan Shebs (shebs@andros.cygnus.com)
1964 * Makefile.in (ns32k-dis.o): Add dependency.
1965 * ns32k-dis.c (print_insn_arg): Declare initialized local as
1966 string, not as array of chars.
1968 Thu Jul 28 18:14:16 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
1970 * sparc-dis.c (print_insn_sparc): Handle new operand type 'x'.
1972 * sparc-opc.c: Added sparclite extended FP operations, and
1973 versions of v9 impdep* instructions permitting specification of
1976 Tue Jul 26 16:36:03 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
1978 * i960-dis.c (reg_names): Now const.
1979 (struct sparse_tabent): New type, copied from array type in mem
1981 (ctrl): Local static array ctrl_tab now const.
1982 (cobr): Local static array cobr_tab now const.
1983 (mem): Local variables reg1, reg2, reg3 now point to const. Local
1984 static variable mem_tab no longer explicitly initialized. Changed
1985 mem_init to const array of struct sparse_tabent.
1986 (reg): Local static variable reg_tab no longer explicitly
1987 initialized. Changed reg_init to const array of struct
1989 (ea): Local static array scale_tab now const.
1991 * i960-dis.c (reg): Added i960JX instructions to reg_init table.
1994 Tue Jul 19 21:00:00 1994 DJ Delorie (dj@ctron.com)
1996 * configure.bat: the disassember needs to be enabled for
1997 "objdump -d" to work in djgpp.
1999 Wed Jul 13 18:01:58 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
2001 * ns32k-dis.c: Deleted all code in "#ifdef GDB".
2002 (invalid_float): Enabled general version, doesn't require running
2003 on ns32k host. Changed to take char* argument, and test for
2004 explicitly specified sizes, instead of using sizeof() on host CPU
2006 (INVALID_FLOAT): Cast first argument.
2007 (opt_u, opt_U, opt_O, opt_C, opt_S, list_P532, list_M532,
2008 list_P032, list_M032): Now const.
2009 (optlist, list_search): Made appropriate arguments now point to
2011 (print_insn_arg): Changed static array of one-character-string
2012 pointers into a static const array of characters; fixed sprintf
2013 statement accordingly.
2015 Sun Jul 10 00:27:47 1994 Ian Dall (dall@hfrd.dsto.gov.au)
2017 * opcodes/ns32k-dis.c: Semi-new file. Had apparently been dropped
2018 from distribution. A ns32k-dis.c from a previous distribution has
2019 been brought up to date and supports the new interface.
2021 * disassemble.c: define ARCH_ns32k and add case bfd_arch_ns32k.
2023 * configure.in: add bfd_ns32k_arch target support.
2025 * Makefile.in: add ns32k-dis.o to ALL_MACHINES.
2026 Add ns32k-dis.c to CFILES. Add dependencies for ns32k-dis.o.
2028 Wed Jun 29 22:10:37 1994 Steve Chamberlain (sac@cygnus.com)
2030 * h8300-dis.c (bfd_h8_disassemble): Get 16bit branch
2033 Tue Jun 28 13:22:06 1994 Stan Shebs (shebs@andros.cygnus.com)
2035 * h8300-dis.c, mips-dis.c: Don't use true and false.
2037 Thu Jun 23 12:53:19 1994 David J. Mackenzie (djm@rtl.cygnus.com)
2039 * configure.in: Change --with-targets to --enable-targets.
2041 Wed Jun 22 13:38:32 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
2043 * mips-dis.c (_print_insn_mips): Build a static hash table mapping
2044 opcodes to the first instruction with that opcode, to speed
2045 disassembly of large files. From ralphc@pyramid.com (Ralph
2048 Tue Jun 7 12:49:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2050 * Makefile.in (mostlyclean): Fix typo (was mostyclean).
2052 Wed May 11 22:32:00 1994 DJ Delorie (dj@ctron.com)
2054 * configure.bat: update to latest makefile.in
2056 Sat May 7 17:13:21 1994 Steve Chamberlain (sac@cygnus.com)
2058 * a29k-dis.c (print_insn): Print 'x' type operand in hex.
2059 * h8300-dis.c (bfd_h8_disassemble): Print 16bit rels correctly.
2060 * sh-dis.c (print_insn_sh): Don't recur endlessly if delay
2061 slot insn is in a delay slot.
2062 * z8k-opc.h: (resflg): Fix patterns.
2063 * h8500-opc.h Fix CR insn patterns.
2065 Fri May 6 14:34:46 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2067 * ppc-opc.c (powerpc_opcodes): Put PowerPC versions of "cmp" and
2068 "cmpl" before POWER versions, so that gas -many uses them.
2070 Thu Apr 28 18:32:36 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
2072 * disassemble.c: New file.
2073 * Makefile.in (OFILES): Add disassemble.o.
2074 (disassemble.o): Provide dependencies; compile with $(ARCHDEFS).
2075 * configure.in: Define ARCHDEFS in Makefile. Code taken from
2076 binutils/configure.in.
2078 * m68k-dis.c (print_insn_m68k): If F_ALIAS flag is set, skip the
2079 opcode being examined.
2081 Thu Apr 21 17:08:40 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2083 * ppc-opc.c (powerpc_operands): Added RAL, RAM and RAS.
2084 (insert_ral, insert_ram, insert_ras): New functions.
2085 (powerpc_opcodes): Use RAL for load with update, RAM for lmw, and
2086 RAS for store with update.
2088 Sat Apr 16 23:41:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2090 * ppc-opc.c (powerpc_opcodes): Correct fcir. From David Edelsohn
2091 (edelsohn@npac.syr.edu).
2093 Wed Apr 6 17:11:45 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2095 * mips-opc.c (mips_opcodes): Correct operands of "nor" with an
2098 Mon Apr 4 16:30:46 1994 Doug Evans (dje@canuck.cygnus.com)
2100 * sparc-opc.c (sparc_opcodes): Fix "rd %fprs,%l0".
2102 Mon Apr 4 13:22:00 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2104 * ppc-opc.c (powerpc_operands): The signedp field has been
2105 removed, so don't initialize it. Set the PPC_OPERAND_SIGNED flag
2106 instead. Add new operand SISIGNOPT.
2107 (powerpc_opcodes): For lis, liu, addis, and cau use SISIGNOPT.
2108 Based on patch from David Edelsohn (edelsohn@npac.syr.edu).
2109 * ppc-dis.c (print_insn_powerpc): Check PPC_OPERAND_SIGNED rather
2112 Wed Mar 30 00:31:49 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2114 * i386-dis.c (struct private): Renamed to dis_private. `private'
2115 is a reserved word for dynix cc.
2117 Mon Mar 28 13:00:15 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2119 * configure.in: Change error message to refer to bfd/config.bfd
2120 rather than bfd/configure.in.
2122 Mon Mar 28 12:28:30 1994 David Edelsohn (edelsohn@npac.syr.edu)
2124 * ppc-opc.c: Define POWER2 as short alias flag.
2125 (powerpc_opcodes): Add POWER/2 opcodes lfq*, stfq*, fcir[z], and
2128 Wed Mar 23 12:23:05 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2130 * i960-dis.c (print_insn_i960): Don't read a second word for
2131 opcodes 0, 1, 2 and 3.
2133 Wed Mar 16 15:37:58 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2135 * configure.in: Don't build m68881-ext.o for bfd_m68k_arch.
2137 Mon Mar 14 14:53:50 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2139 * m68881-ext.c: Removed; no longer used.
2140 * Makefile.in: Changed accordingly.
2142 * m68k-dis.c (ext_format_68881): Don't declare.
2143 (print_insn_m68k): If an instruction uses place 'i', it uses at
2144 least four fixed bytes.
2145 (print_insn_arg): Don't bump p by 2 for case 'I', place 'i'. For
2146 extended float, convert to double using floatformat_to_double, not
2147 ieee_extended_to_double, and fetch the data before converting it.
2149 Tue Mar 8 18:12:25 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2151 * mips-opc.c: It's sqrt.s, not sqrt.w. From
2152 davidj@ICSI.Berkeley.EDU (David Johnson).
2154 Tue Feb 8 16:55:27 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2156 * ppc-opc.c (powerpc_opcodes): The POWER uses bdn[l][a] where the
2157 PowerPC uses bdnz[l][a].
2159 Tue Feb 8 00:32:28 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2161 * dis-buf.c, i386-dis.c: Include sysdep.h.
2163 Mon Feb 7 19:22:23 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2165 * configure.in (bfd_powerpc_arch): Use ppc-dis.o and ppc-opc.o.
2167 * ppc-opc.c (powerpc_opcodes): Mark POWER instructions supported
2168 by Motorola PowerPC 601 with PPC_OPCODE_601.
2169 * ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc):
2170 Disassemble Motorola PowerPC 601 instructions as well as normal
2171 PowerPC instructions.
2173 Sun Feb 6 07:45:17 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
2175 * i960-dis.c (reg, mem): Just use a static array instead of
2178 Sat Feb 5 00:04:02 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
2180 * hppa-dis.c (print_insn_hppa): For '?' and '@' only adjust the
2181 condition name index if this is for a negated condition.
2183 * hppa-dis.c (print_insn_hppa): No space before 'H' operand.
2184 Floating point format for 'H' operand is backwards from normal
2185 case (0 == double, 1 == single). For '4', '6', '7', '9', and '8'
2186 operands (fmpyadd and fmpysub), handle bizarre register
2187 translation correctly for single precision format.
2189 * hppa-dis.c (print_insn_hppa): Do not emit a space after 'F'
2190 or 'I' operands if the next format specifier is 'M' (fcmp
2191 condition completer).
2193 Feb 4 23:38:03 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2195 * ppc-opc.c (powerpc_operands): New operand type MBE to handle a
2196 single number giving a bitmask for the MB and ME fields of an M
2197 form instruction. Change NB to accept 32, and turn it into 0;
2198 also turn 0 into 32 when disassembling. Seperated SH from NB.
2199 (insert_mbe, extract_mbe): New functions.
2200 (insert_nb, extract_nb): New functions.
2201 (SC_MASK): Mask out SA and LK bits.
2202 (powerpc_opcodes): Change "cal" to use RT, D, RA rather than RT,
2203 RA, SI. Change "liu" and "cau" to use UI rather than SI. Mark
2204 "bctr" and "bctrl" as accepted by POWER. Change "rlwimi",
2205 "rlimi", "rlwimi.", "rlimi.", "rlwinm", "rlinm", "rlwinm.",
2206 "rlinm.", "rlmi", "rlmi.", "rlwnm", "rlnm", "rlwnm.", "rlnm." to
2207 use MBE rather than MB. Add "mfmq" and "mtmq" POWER instructions.
2208 (powerpc_macros): Define table of macro definitions.
2209 (powerpc_num_macros): Define.
2211 * ppc-dis.c (print_insn_powerpc): Don't skip optional operands
2212 if PPC_OPERAND_NEXT is set.
2214 Sat Jan 22 23:10:07 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2216 * i960-dis.c (print_insn_i960): Make buffer bfd_byte instead of
2217 char. Retrieve contents using bfd_getl32 instead of shifting.
2219 Fri Jan 21 19:01:39 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2221 * ppc-opc.c: New file. Opcode table for PowerPC, including
2222 opcodes for POWER (RS/6000).
2223 * ppc-dis.c: New file. PowerPC and Power (RS/6000) disassembler.
2224 * Makefile.in (ALL_MACHINES): Add ppc-dis.o and ppc-opc.o.
2225 (CFILES): Add ppc-dis.c.
2226 (ppc-dis.o, ppc-opc.o): New targets.
2227 * configure.in: Build ppc-dis.o and ppc-opc.o for bfd_rs6000_arch.
2229 Mon Jan 17 20:05:49 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
2231 * hppa-dis.c (print_insn_hppa): Handle 'N' in assembler template.
2232 No space before 'u', 'f', or 'N'.
2234 Sun Jan 16 14:20:16 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
2236 * i386-dis.c (print_insn_i386): Add FIXME comment regarding reading
2237 farther than we should.
2239 * i386-dis.c (dis386): Use Yb and Yv for scasb and scasS.
2241 Thu Jan 6 12:38:05 1994 David J. Mackenzie (djm@thepub.cygnus.com)
2243 * sparc-dis.c m68k-dis.c alpha-dis.c a29k-dis.c: Fix comments.
2245 Wed Jan 5 11:56:21 1994 David J. Mackenzie (djm@thepub.cygnus.com)
2247 * i960-dis.c (print_insn_i960): Only read word2 if the instruction
2248 needs it, to prevent reading past the end of a section.
2250 Wed Nov 17 17:20:12 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2252 * mips-opc.h: Use macro for j instruction, to support SVR4 PIC.
2253 Removed t,A case for la; always use t,A(b) case.
2255 Mon Nov 8 12:37:36 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2257 From Ted Lemen <mellon@pepper.ncd.com>
2258 * mips-dis.c (print_insn_arg): Handle 'k'.
2259 * mips-opc.c: Make cache use k, not t.
2261 Sun Nov 7 23:52:34 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2263 * alpha-opc.h, alpha-dis.c (print_insn_alpha): Add
2264 FLOAT_MEMORY_FORMAT_CODE, FLOAT_BRANCH_FORMAT_CODE, correct
2265 FLOAT_FORMAT_CODE to put out floating point register names.
2267 Mon Nov 1 18:17:51 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2269 * mips-opc.c: Use macros for jal variants, to support SVR4 PIC.
2271 Thu Oct 28 17:42:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2273 * a29k-dis.c (print_insn): Use 0x%08x, not 0x%8x.
2275 Wed Oct 27 11:48:01 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2277 * mips-opc.c (dsll, dsra, dsrl): Added '>' cases for shift counts
2278 larger than 32. Moved dsxx32 variants first for disassembler.
2280 Mon Oct 25 11:33:14 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
2282 * z8kgen.c, z8k-opc.h: Add full lda information.
2284 Tue Oct 19 12:39:25 1993 Jeffrey A Law (law@cs.utah.edu)
2286 * hppa-dis.c (print_insn_hppa): Do not emit a space after
2287 movb instructions. Any necessary space will be emitted by
2288 the code to handle nullification completers.
2290 Wed Oct 13 16:19:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2292 * mips-opc.c: Moved l.d down so that it disassembles as ldc1.
2294 Fri Oct 8 02:34:21 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2296 * alpha-opc.h: Add ldl_l, fix typo for ldq_u.
2297 * alpha-dis.c (print_insn_alpha): Add code for PAL_FORMAT_CODE.
2299 Tue Oct 5 17:47:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2301 * mips-opc.c: Correct lwu opcode value (book had it wrong).
2303 Thu Sep 30 11:26:18 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
2305 * z8k-dis.c (FETCH_DATA): get just the right amount of data.
2306 (unpack_instr): Cope with ARG_IMM4M1 type instructions.
2308 Wed Sep 29 16:24:49 1993 K. Richard Pixley (rich@sendai.cygnus.com)
2310 * m88k-dis.c (m88kdis): comment change. Remove space after
2312 (printop): handle new arg types DEC and XREG for m88110.
2314 Tue Sep 28 19:20:16 1993 Jeffrey A Law (law@snake.cs.utah.edu)
2316 * hppa-dis.c (print_insn_hppa): Handle 'z' operand
2317 type for absolute branch addresses. Delete special
2318 "ble" and "be" code in 'W' operand code.
2320 Fri Sep 24 14:08:33 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2322 * mips-opc.c: Set hazard information correctly for branch
2323 likely instructions.
2325 Fri Sep 17 04:41:17 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2327 * alpha-dis.c (print_insn_alpha), alpha-opc.h: Fix bugs, use
2328 info->fprintf_func for printing and info->print_address_func for
2331 Wed Sep 15 12:12:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2333 * mips-opc.c: Set INSN_TRAP for tXX instructions.
2335 Thu Sep 9 10:11:27 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2337 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson):
2338 Corrected second case of "b" for disassembler.
2340 Tue Sep 7 14:25:15 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2342 * mips-dis.c, m88k-dis.c: Don't include libbfd.h. Changed calls
2343 to BFD swapping routines to correspond to BFD name changes.
2345 Thu Sep 2 10:35:25 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2347 * mips-opc.c: Change div machine instruction to be z,s,t rather
2348 than s,t. Change div macro to be d,v,t rather than d,s,t.
2349 Likewise for divu, ddiv, ddivu. Added z,s,t case for drem, dremu,
2350 rem and remu which generates only the corresponding div
2351 instruction. This is for compatibility with the MIPS assembler,
2352 which only generates the simple machine instruction when an
2353 explicit destination of $0 is used.
2354 * mips-dis.c (print_insn_arg): Handle 'z' (always register zero).
2356 Thu Aug 26 17:41:44 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2358 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Set
2359 WR_31 hazard for bal, bgezal, bltzal.
2361 Thu Aug 26 17:20:02 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
2363 * hppa-dis.c (print_insn_hppa): Use print function
2364 from within the disassemble_info, not fprintf_filtered.
2366 Wed Aug 25 13:51:40 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
2368 * hppa-dis.c (print_insn_hppa): Handle '|' like '>'. (From Jeff
2369 Law, law@cs.utah.edu.)
2371 Mon Aug 23 12:44:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2373 * mips-opc.c ("absu"): Removed.
2376 Fri Aug 20 10:52:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2378 * mips-opc.c: Added r6000 and r4000 instructions and macros.
2379 Changed hazard information to distinguish between memory load
2380 delays and coprocessor load delays.
2382 Wed Aug 18 15:39:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2384 * mips-opc.c: li.d uses "T,L", not "S,F". Added li.s.
2386 Tue Aug 17 09:44:42 1993 David J. Mackenzie (djm@thepub.cygnus.com)
2388 * configure.in: Don't pass cpu to config.bfd.
2390 Tue Aug 17 12:23:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2392 * m88k-dis.c (m88kdis): Make class unsigned.
2394 Thu Aug 12 15:08:18 1993 Ian Lance Taylor (ian@cygnus.com)
2396 * alpha-dis.c (print_insn_alpha): One branch format case was
2397 missing the instruction name.
2399 Wed Aug 11 19:29:39 1993 David J. Mackenzie (djm@thepub.cygnus.com)
2401 * Makefile.in (ALL_MACHINES): Renamed from DIS_LIBS.
2402 Add the arch-specific auxiliary files.
2403 (OFILES): Remove the arch-specific auxiliary files
2404 and use BFD_MACHINES instead of DIS_LIBS.
2405 * configure.in: Set BFD_MACHINES based on --with-targets option.
2407 Thu Aug 12 12:04:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2409 * mips-opc.c: Added lwc1 E,A(b) to go with lwc1 T,A(b). Similarly
2412 Sun Aug 8 15:09:30 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
2414 * sparc-opc.c: Change CONST to const to deal with gcc
2415 -Dconst=__const -traditional.
2417 Fri Aug 6 10:58:55 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2419 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Took
2420 coprocessor instructions out of #if 0, and made them use new
2423 Thu Aug 5 17:11:06 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
2425 * sparc-dis.c: Include ansidecl.h before opcodes/sparc.h.
2427 Fri Jul 30 18:48:15 1993 John Gilmore (gnu@cygnus.com)
2429 * sparc-opc.c: Add F_JSR, F_UNBR, or F_CONDBR flags to each branch
2430 instruction, for use by the disassembler.
2432 * sparc-dis.c (SEX): Add sign extension macro. Replace many
2433 hand-coded sign extensions that depended on 32-bit host ints.
2434 FIXME, we still depend on big-endian host bitfield ordering.
2435 (sparc_print_insn): Set the insn_info_valid field, and the
2436 other fields that describe the instruction being printed.
2438 Tue Jul 27 17:04:58 1993 Jim Wilson (wilson@sphagnum.cygnus.com)
2440 * sparc-opc.c (call): Accept all 6 addressing modes valid for
2441 `jmp' instead of just one of them.
2443 Wed Jul 21 11:43:32 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
2445 * hppa-dis.c: Move floating registers from reg_names to fp_reg_names.
2446 (fput_fp_reg_r): Renamed from fput_reg_r.
2447 (fput_fp_reg): New function.
2448 (print_insn_hppa): Use fput_fp_reg{,_r} where appropriate.
2450 * hppa-dis.c (print_insn_hppa, cases 'a', 'd'): Print space afterwards.
2452 * hppa-dis.c (print_insn_hppa, case 'd'): Use GET_COND not GET_FIELD.
2454 Mon Jul 19 13:52:21 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
2456 * hppa-dis.c (print_insn_hppa): Use extract_5r_store for 'r'.
2458 * hppa-dis.c (print_insn_hppa, case '>'): If next character is 'n',
2459 don't output a space.
2461 * hppa-dis.c (float_format_names): 10 is undefined, and 11 is quad.
2463 Sun Jul 18 16:30:02 1993 Jim Kingdon (kingdon@rtl.cygnus.com)
2465 * mips-opc.c: New file, containing opcode table from
2466 ../include/opcode/mips.h.
2467 * Makefile.in: Add it.
2469 Thu Jul 15 12:37:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2471 * m88k-dis.c: New file, moved in from gdb and changed to use the
2472 new dis-asm.h disassembler interface.
2473 * Makefile.in (DIS_LIBS): Added m88k-dis.o.
2474 (m88k-dis.o): New target.
2476 Tue Jul 13 10:04:16 1993 Ian Lance Taylor (ian@cygnus.com)
2478 * mips-dis.c (print_insn_arg, _print_insn_mips): Made pointer to
2479 argument string const char * to correspond to opcode/mips.h.
2481 Tue Jul 6 15:18:37 1993 Ian Lance Taylor (ian@cygnus.com)
2483 * mips-dis.c: Updated to account for name changes in new version
2485 * Makefile.in: Added header file dependencies.
2487 Sat Jul 3 23:47:56 1993 Doug Evans (dje@canuck.cygnus.com)
2489 * h8300-dis.c (bfd_h8_disassemble): Correct fetching of instruction.
2491 Thu Jul 1 12:23:38 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
2493 * m68k-dis.c (NEXTWORD, NEXTLONG): Use ((x) ^ 0x8000) - 0x8000 to sign
2494 extend, rather than shifts.
2496 Sun Jun 20 20:56:56 1993 Ken Raeburn (raeburn@poseidon.cygnus.com)
2498 * Makefile.in: Undo 15 June change.
2500 Fri Jun 18 14:15:15 1993 Per Bothner (bothner@deneb.cygnus.com)
2502 * m68k-dis.c (print_insn_arg): Change return value to byte count
2504 * m68k-dis.c: Re-write to detect invalid operands before
2505 printing anything, so we can handle this the same way we
2506 handle invalid opcodes.
2508 Thu Jun 17 15:01:36 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
2510 * sh-dis.c, sh-opc.h: Understand some more opcodes.
2512 Wed Jun 16 13:48:05 1993 Ian Lance Taylor (ian@cygnus.com)
2514 * hppa-dis.c: Include <ansidecl.h> and sysdep.h before other
2517 Tue Jun 15 21:45:26 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
2519 * sparc-dis.c: Don't declare qsort, since sysdep.h might.
2521 * configure.in: Do make sysdep.h link.
2522 * Makefile.in: Search ../include. Don't search ../bfd.
2524 Tue Jun 15 13:36:10 1993 Stu Grossman (grossman@cygnus.com)
2526 Changes from Jeff Law, law@cs.utah.edu:
2527 * hppa-dis.c: Fix typo. 'a' and 'd' were reversed.
2528 Do not print a space before the completers specified by
2531 Fri Jun 11 18:40:21 1993 Ken Raeburn (raeburn@cygnus.com)
2533 * mips-dis.c: No longer need to bomb out if HOST_64_BIT is
2534 defined, since gdb has been fixed.
2536 Changes from Jeff Law, law@cs.utah.edu:
2537 * hppa-dis.c (print_insn_hppa): Last argument to fput_reg,
2538 fput_reg_r, fput_creg, fput_const, and fputs_filtered should
2539 be a *disassemble_info, not a *FILE.
2540 * hppa-dis.c: Support 'd', '!', and 'a'.
2541 * hppa-dis.c: Support 's' to extract a 2 bit space register.
2542 * hppa-dis.c: Delete cases which are no longer needed.
2544 Fri Jun 11 07:53:48 1993 Jim Kingdon (kingdon@cygnus.com)
2546 * m68k-dis.c (print_insn_{m68k,arg}): Add MMU codes.
2548 Tue Jun 8 12:25:01 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
2550 * h8300-dis.c: New file, removed from bfd/cpu-h8300.c, with
2553 Mon Jun 7 12:58:49 1993 Per Bothner (bothner@rtl.cygnus.com)
2555 * Makefile.in (CSEARCH): Add -I../bfd for sysdep.h and bfd.h.
2556 * configure.in: No longer need to configure to get sysdep.h.
2558 Thu Jun 3 15:56:49 1993 Stu Grossman (grossman@cygnus.com)
2560 * Patches from Jeffrey Law <law@cs.utah.edu>.
2561 * hppa-dis.c: Support 'I', 'J', and 'K' in output
2562 templates for 1.1 FP computational instructions.
2564 Tue May 25 13:05:48 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
2566 * h8500-dis.c (print_insn_h8500): Address argument is type
2568 * z8k-dis.c (print_insn_z8k, print_insn_z8001, print_insn_z8002):
2571 * h8500-opc.h (addr_class_type): No comma at end of enumerator.
2572 * sh-opc.h (sh_nibble_type, sh_arg_type): Ditto.
2574 * sparc-dis.c (compare_opcodes): Move static declaration to
2577 Fri May 21 14:17:37 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2579 * sparc-dis.c (print_insn_sparc): Implement 'n' argument for unimp
2580 instruction, remove unimp hack from 'l' argument.
2582 Wed May 19 15:35:54 1993 Stu Grossman (grossman@cygnus.com)
2584 * z8k-dis.c (fetch_data): Use unsigned char to make ancient gcc's
2587 Fri May 14 15:22:46 1993 Ian Lance Taylor (ian@cygnus.com)
2589 * Based on patches from davidj@ICSI.Berkeley.EDU (David Johnson):
2590 * mips-dis.c (print_insn_arg): Handle 'C' for general coprocessor
2593 Fri May 14 00:09:14 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
2595 * hppa-dis.c: Include dis-asm.h before sysdep.h. Changed some
2596 arrays of string pointers to 2-d arrays of chars, to save
2599 Thu May 6 20:51:17 1993 Fred Fish (fnf@cygnus.com)
2601 * a29k-dis.c, alpha-dis.c, i960-dis.c, sparc-dis.c, z8k-dis.c:
2602 Cast second arg to read_memory_func to "bfd_byte *", as necessary.
2604 Tue May 4 20:31:10 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
2606 * hppa-dis.c: New file from Utah, adapted to new disassembler
2608 * Makefile.in: Include it.
2610 Mon Apr 26 18:17:42 1993 Steve Chamberlain (sac@thepub.cygnus.com)
2612 * sh-dis.c, sh-opc.h: New files.
2614 Fri Apr 23 18:51:22 1993 Steve Chamberlain (sac@thepub.cygnus.com)
2616 * alpha-dis.c, alpha-opc.h: New files.
2618 Tue Apr 6 12:54:08 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2620 * mips-dis.c: Sign extend 'j' and 'b' arguments, delta is a signed
2623 Mon Apr 5 17:37:37 1993 John Gilmore (gnu@cygnus.com)
2625 * sparc-dis.c: Make "ta" the default trap instruction, "t" the alias.
2627 Fri Apr 2 07:24:27 1993 Ian Lance Taylor (ian@cygnus.com)
2629 * a29k-dis.c, sparc-dis.c, sparc-opc.c: Use CONST rather than
2632 Thu Apr 1 11:20:43 1993 Jim Kingdon (kingdon@cygnus.com)
2634 * sparc-dis.c: Use fprintf_func a few places where I forgot,
2635 and double percent signs a few places.
2637 * a29k-dis.c, i960-dis.c: New, merged from gdb and binutils.
2639 * i386-dis.c, m68k-dis.c, mips-dis.c, sparc-dis.c:
2640 Use info->print_address_func not print_address.
2642 * dis-buf.c (generic_print_address): New function.
2644 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
2646 * Makefile.in: Add sparc-dis.c.
2647 sparc-dis.c: New file, merges binutils and gdb versions as follows:
2649 Add `add' instruction to the set that get checked
2650 for a preceding `sethi' in order to print an absolute address.
2651 * (print_insn): Disassembly prefers real instructions.
2652 (is_delayed_branch): Speed up.
2653 * sparc-opcode.h: Add ALIAS bit to aliases. Fix up opcode tables.
2654 Still missing some float ops, and needs testing.
2655 * sparc-pinsn.c (print_insn): Eliminate 'set' test, subsumed by
2656 F_ALIAS. Use printf, not fprintf, when not passing a file
2658 (compare_opcodes): Check that identical instructions have
2659 identical opcodes, complain otherwise.
2662 * Include reg_names.
2664 Use dis-asm.h/read_memory_func interface.
2666 Wed Mar 31 20:49:06 1993 K. Richard Pixley (rich@rtl.cygnus.com)
2668 * h8500-dis.c, i386-dis.c, m68k-dis.c, z8k-dis.c (fetch_data):
2669 deliberately return non-zero to setjmp from longjmp. Otherwise
2670 this code fails to compile.
2672 Wed Mar 31 17:04:31 1993 Stu Grossman (grossman@cygnus.com)
2674 * m68k-dis.c: Fix prototype for fetch_arg().
2676 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
2678 * dis-buf.c: New file, for new read_memory_func interface.
2679 Makefile.in (OFILES): Include it.
2680 m68k-dis.c, i386-dis.c, h8500-dis.c, mips-dis.c, z8k-dis.c:
2681 Use new read_memory_func interface.
2683 Mon Mar 29 14:02:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
2685 * h8500-dis.c (print_insn_h8500): Get sign of fp offsets right.
2686 * h8500-opc.h: Fix couple of opcodes.
2688 Wed Mar 24 02:03:36 1993 david d `zoo' zuhn (zoo at poseidon.cygnus.com)
2690 * Makefile.in: add dvi & installcheck targets
2692 Mon Mar 22 18:55:04 1993 John Gilmore (gnu@cygnus.com)
2694 * Makefile.in: Update for h8500-dis.c.
2696 Fri Mar 19 14:27:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
2698 * h8500-dis.c, h8500-opc.h: New files
2700 Thu Mar 18 14:12:37 1993 Per Bothner (bothner@rtl.cygnus.com)
2702 * mips-dis.c, z8k-dis.c: Converted to use interface defined in
2703 ../include/dis-asm.h.
2704 * m68k-dis.c: New file (merge of ../binutils/m68k-pinsn.c
2705 and ../gdb/m68k-pinsn.c).
2706 * i386-dis.c: New file (merge of ../binutils/i386-pinsn.c
2707 and ../gdb/i386-pinsn.c).
2708 * m68881-ext.c: New file. Moved definition of
2709 ext_format ext_format_68881 from ../gdb/m68k-tdep.c.
2710 * Makefile.in: Adjust for new files.
2711 * i386-dis.c: Patches from John Hassey (hassey@dg-rtp.dg.com).
2712 * m68k-dis.c: Recognize '9' placement code, so (say) pflush
2713 can be dis-assembled.
2715 Wed Feb 17 09:19:47 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
2717 * mips-dis.c (print_insn_arg): Now returns void.
2719 Mon Jan 11 16:09:16 1993 Fred Fish (fnf@cygnus.com)
2721 * mips-dis.c (ansidecl.h): Include for benefit of sysdep.h
2722 files that use the macros.
2724 Thu Jan 7 13:15:17 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2726 * mips-dis.c: New file, from gdb/mips-pinsn.c.
2727 * Makefile.in (DIS_LIBS): Added mips-dis.o.
2728 (CFILES): Added mips-dis.c.
2730 Thu Jan 7 07:36:33 1993 Steve Chamberlain (sac@thepub.cygnus.com)
2732 * z8k-dis.c (print_insn_z8001, print_insn_z8002): new routines
2733 * z8kgen.c, z8k-opc.h: fix sizes of some shifts.
2735 Tue Dec 22 15:42:44 1992 Per Bothner (bothner@rtl.cygnus.com)
2737 * Makefile.in: Improve *clean rules.
2738 * configure.in: Allow a default host.
2740 Tue Nov 17 19:53:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
2742 * Makefile.in: also use -I$(srcdir)/../bfd, since some sysdep
2743 files include other sysdep files
2745 Thu Nov 12 16:10:37 1992 Steve Chamberlain (sac@thepub.cygnus.com)
2747 * z8k-dis.c z8k-opc.h z8kgen.c: checkpoint
2749 Fri Oct 9 04:56:05 1992 John Gilmore (gnu@cygnus.com)
2751 * configure.in: For host support, use ../bfd/configure.host
2752 so it stays in sync with the ../bfd/hosts database.
2754 Thu Oct 1 23:38:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
2756 * configure.in: use cpu-vendor-os triple instead of nested cases
2758 Wed Sep 30 16:09:20 1992 Michael Werner (mtw@cygnus.com)
2760 * z8k-dis.c (unparse_instr): fix bug where opcode returned was
2761 *always* the wrong one.
2763 Wed Sep 30 07:42:17 1992 Steve Chamberlain (sac@thepub.cygnus.com)
2765 * z8kgen.c: added copyright info
2767 Tue Sep 29 12:20:21 1992 Steve Chamberlain (sac@thepub.cygnus.com)
2769 * z8k-dis.c (unparse_instr): prettier tabs
2770 * z8kgen.c -> z8k-opc.h: bug fixes in tables
2772 Fri Sep 25 12:50:32 1992 Stu Grossman (grossman at cygnus.com)
2774 * configure.in: Add ncr* configuration.
2775 * z8k-dis.c (struct instr_data_s): Make instr_asmsrc char to make
2776 picayune ANSI compilers happy.
2778 Sep 20 08:50:55 1992 Fred Fish (fnf@cygnus.com)
2780 * configure.in (i386): Make i386 and i486 synonymous for now.
2781 * configure.in (i[34]86-*-sysv4): Add my_host definition.
2783 Fri Sep 18 17:01:23 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
2785 * Makefile.in (install): Fix typo.
2787 Fri Sep 18 02:04:24 1992 John Gilmore (gnu@cygnus.com)
2789 * Makefile.in (make): Remove obsolete crud.
2790 (sparc-opc.o): Avoid Sun Make VPATH bug.
2792 Tue Sep 8 17:29:27 1992 K. Richard Pixley (rich@sendai.cygnus.com)
2794 * Makefile.in: since there are no SUBDIRS, remove rule and
2795 references of subdir_do.
2797 Tue Sep 8 17:02:58 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
2799 * Makefile.in (install): Get the library name right here too.
2800 Don't install bfd.h, since it's unrelated to this library. No
2801 subdirs to recurse into, either.
2802 (CFILES): The source file has a .c suffix, not .o.
2804 * sparc-opc.c: New file, moved from BFD.
2805 * Makefile.in (OFILES): Build it.
2807 Thu Sep 3 16:59:20 1992 Michael Werner (mtw@cygnus.com)
2809 * z8k-dis.c: fixed forward refferences of some declarations.
2811 Mon Aug 31 16:09:45 1992 Michael Werner (mtw@cygnus.com)
2813 * Makefile.in: get the name of the library right
2815 Mon Aug 31 13:47:35 1992 Steve Chamberlain (sac@thepub.cygnus.com)
2817 * z8k-dis.c: knows how to disassemble z8k stuff
2818 * z8k-opc.h: new file full of z8000 opcodes
2822 version-control: never