1 Wed Sep 24 11:29:35 1997 Ian Lance Taylor <ian@cygnus.com>
3 * m68k-opc.c: Correct movew of an immediate operand to %sr or %ccr
6 * configure.in: Call AC_CHECK_TOOL before AM_PROG_LIBTOOL.
7 * aclocal.m4: Rebuild with new libtool.
11 Fri Sep 19 11:45:49 1997 Andrew Cagney <cagney@b1.cygnus.com>
13 * v850-opc.c ("cmov"): Order reg param r1, r2 not r2, r2.
16 Thu Sep 18 11:21:43 1997 Doug Evans <dje@canuck.cygnus.com>
18 * sparc-opc.c (sparclet_cpreg_table): Add %ccsr2, %cccrr, %ccrstr.
20 Tue Sep 16 15:18:20 1997 Nick Clifton <nickc@cygnus.com>
22 * v850-opc.c (v850_opcodes): Further rearrangements.
25 Tue Sep 16 16:12:11 1997 Ken Raeburn <raeburn@cygnus.com>
27 * d30v-opc.c (rot2h, sra2h, srl2h insns): Revert last change.
30 Tue Sep 16 09:48:50 1997 Nick Clifton <nickc@cygnus.com>
32 * v850-opc.c (v850_opcodes): Fields reordered to allow assembler
35 Tue Sep 16 10:01:00 1997 Gavin Koch <gavin@cygnus.com>
37 * mips-opc.c: Added tx39 insns sdbbp, rfe, and deret.
39 * mips16-opc.c: Added mips16 sdbbp.
42 Mon Sep 15 18:31:52 1997 Nick Clifton <nickc@cygnus.com>
44 * v850-opc.c: Initialise processors field of v850_opcode structure.
47 Wed Aug 27 21:42:39 1997 Ken Raeburn <raeburn@cygnus.com>
49 Merge changes from Martin Hunt:
51 * d30v-opc.c: Change mvfacc to accept 6-bit unsigned values.
53 * d30v-opc.c (pre_defined_registers): Add control registers from 0-63.
54 (d30v_opcode_tabel): Add dbt, rtd, srah, and srlh instructions. Fix
55 rot2h, sra2h, and srl2h to use new SHORT_A5S format.
57 * d30v-dis.c (print_insn): Fix disassembly of SHORT_D2 opcodes.
59 * d30v-dis.c (print_insn): First operand of d*i (delayed
60 branch) instructions is relative.
62 * d30v-opc.c (d30v_opcode_table): Change form for repeati.
63 (d30v_operand_table): Add IMM6S3 type.
64 (d30v_format_table): Change SHORT_D2. Add LONG_Db.
66 * d30v-dis.c: Fix bug with ".s" and ".l" extensions
69 * d30v-opc.c: Correct entries for repeat*, and sat*.
70 Make IMM5 unsigned. Create IMM6U and IMM12S3U operand
71 types. Correct several formats.
73 * d30v-opc.c: (pre_defined_registers): Add dpsw and dpc.
75 * d30v-opc.c (pre_defined_registers): Change control registers.
77 * d30v-opc.c (d30v_format_table): Correct SHORT_C1 and
78 SHORT_C2. Manual was incorrect.
80 * d30v-dis.c (lookup_opcode): Return value now indicates
81 if an opcode has a short and a long form. Used for deciding
82 to append a ".s" or ".l".
83 (print_insn): Append a ".s" to an instruction if it is
84 the short form and ".l" if it is a long form. Do not append
85 anything if the instruction has only one possible size.
87 * d30v-opc.c: Change mulx2h to require an even register.
88 New form: SHORT_A2; a SHORT_A form that needs an even
89 register as the first operand.
91 * d30v-dis.c (print_insn_d30v): Fix problem where the last
92 instruction was not being disassembled if there were an odd
93 number of instructions.
95 * d30v-opc.c (SHORT_M2, LONG_M2): Two new forms.
99 Fri Sep 12 11:43:54 1997 Nick Clifton <nickc@cygnus.com>
101 * v850-dis.c (disassemble): Improved display of register lists.
104 Thu Sep 11 17:35:10 1997 Doug Evans <dje@canuck.cygnus.com>
106 * sparc-opc.c (sparc_opcodes): Fix assembler args to
107 fzeros, fones, fsrc1, fsrc1s, fsrc2s, fnot1, fnot1s, fnot2s,
108 fors, fnors, fands, fnands, fxors, fxnors, fornot1s, fornot2s,
109 fandnot1s, fandnot2s.
111 Tue Sep 9 10:03:49 1997 Doug Evans <dje@canuck.cygnus.com>
113 * sparc-opc.c (sparc_opcodes): Fix op3 field for fcmpq/fcmpeq.
115 Mon Sep 8 14:06:59 1997 Doug Evans <dje@canuck.cygnus.com>
117 * cgen-asm.c (cgen_parse_address): New argument resultp.
119 * m32r-asm.c (parse_h_hi16): Right shift numbers by 16.
121 Tue Sep 2 18:39:08 1997 Jeffrey A Law (law@cygnus.com)
123 * mn10200-dis.c (disassemble): PC relative instructions are
124 relative to the next instruction, not the current instruction.
126 Tue Sep 2 15:41:55 1997 Nick Clifton <nickc@cygnus.com>
128 * v850-dis.c (disassemble): Only signed extend values that are not
129 returned by extract functions.
130 Remove use of V850_OPERAND_ADJUST_SHORT_MEMORY flag.
132 Tue Sep 2 15:39:40 1997 Nick Clifton <nickc@cygnus.com>
134 * v850-opc.c: Update comments. Remove use of
135 V850_OPERAND_ADJUST_SHORT_MEMORY. Fix several operand patterns.
137 Tue Aug 26 09:42:28 1997 Nick Clifton <nickc@cygnus.com>
139 * v850-opc.c (MOVHI): Immediate parameter is unsigned.
141 Mon Aug 25 15:58:07 1997 Christopher Provenzano <proven@cygnus.com>
143 * configure: Rebuilt with latest devo autoconf for NT support.
145 Fri Aug 22 10:35:15 1997 Nick Clifton <nickc@cygnus.com>
147 * v850-dis.c (disassemble): Use curly brace syntax for register
150 * v850-opc.c (v850_opcodes[]): Add NOT_R0 flag to decect cases
151 where r0 is being used as a destination register.
154 Thu Aug 21 11:09:09 1997 Nick Clifton <nickc@cygnus.com>
156 * v850-opc.c (v850_opcodes[]): Move divh opcodes next to each other.
160 Wed Aug 20 00:43:11 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
162 * sh-opc.h (sh_arg_type): Add A_SGR and A_DBR.
163 (sh_nibble_type, sh_arg_type): Add SH4 floating point extensions.
164 (sh_table): Likewise. Add movca.l, ocbi, ocbp, ocbwb.
165 Add insns to access SGR and DBR.
166 * sh-dis.c (print_insn_shx): Add SH4 floating point extensions.
169 Tue Aug 19 10:59:59 1997 Richard Henderson <rth@cygnus.com>
171 * alpha-opc.c (alpha_opcodes): Fix hw_rei_stall mungage.
174 Mon Aug 18 11:10:03 1997 Nick Clifton <nickc@cygnus.com>
176 * v850-opc.c (v850_opcodes[]): Remove use of flag field.
177 * v850-opc.c (v850_opcodes[]): Add support for reversed short load
180 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
182 * configure (cgen_files): Add support for v850e target.
183 * configure.in (cgen_files): Add support for v850e target.
185 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
187 * configure (cgen_files): Add support for v850eq target.
188 * configure.in (cgen_files): Add support for v850eq target.
191 Fri Aug 15 05:17:48 1997 Doug Evans <dje@canuck.cygnus.com>
193 * configure.in (bfd_arc_arch): Add.
194 * configure: Rebuild.
195 * Makefile.am (ALL_MACHINES): Add arc-dis.lo, arc-opc.lo.
196 * Makefile.in: Rebuild.
197 * arc-dis.c, arc-opc.c: New files.
198 * disassemble.c (ARCH_all): Define ARCH_arc.
199 (disassembler): Add ARC support.
201 Wed Aug 13 18:52:11 1997 Nick Clifton <nickc@cygnus.com>
204 * v850-dis.c (disassemble): Add support for v850EQ instructions.
206 * v850-opc.c (insert_i5div, extract_i5div): New Functions.
207 (v850_opcodes): Add v850EQ instructions.
209 * v850-dis.c (disassemble): Add support for v850E instructions.
211 * v850-opc.c (insert_d5_4, extract_d5_4, insert_d16_16,
212 extract_d16_16, insert_i9, extract_i9, insert_u9, extract_u9,
213 insert_spe, extract_spe): New Functions.
214 (v850_opcodes): Add v850E instructions.
217 * v850-opc.c: Reorganised and re-layed out to improve readability
220 Tue Aug 5 23:09:31 1997 Ian Lance Taylor <ian@cygnus.com>
222 * configure: Rebuild with autoconf 2.12.1.
224 Mon Aug 4 12:02:16 1997 Ian Lance Taylor <ian@cygnus.com>
226 * aclocal.m4, configure: Rebuild with new automake patches.
228 Fri Aug 1 13:02:04 1997 Ian Lance Taylor <ian@cygnus.com>
230 * configure.in: Set enable_shared before AM_PROG_LIBTOOL.
231 * acinclude.m4: Just include acinclude.m4 from BFD.
232 * aclocal.m4, configure: Rebuild.
234 Thu Jul 31 21:44:42 1997 Ian Lance Taylor <ian@cygnus.com>
236 * Makefile.am: New file, based on old Makefile.in.
237 * acconfig.h: New file.
238 * acinclude.m4: New file.
239 * stamp-h.in: New file.
240 * configure.in: Call AM_INIT_AUTOMAKE and AM_PROG_LIBTOOL.
241 Removed shared library handling; now handled by libtool. Replace
242 AC_CONFIG_HEADER with AM_CONFIG_HEADER. Call AM_MAINTAINER_MODE,
243 AM_CYGWIN32, and AM_EXEEXT. Replace AC_PROG_INSTALL with
244 AM_PROG_INSTALL. Change all .o files to .lo. Remove stamp-h
245 handling in AC_OUTPUT.
246 * dep-in.sed: Change .o to .lo.
247 * Makefile.in: Now built with automake.
248 * aclocal.m4: Now built with aclocal.
249 * config.in, configure: Rebuild.
251 Mon Jul 28 21:52:24 1997 Jeffrey A Law (law@cygnus.com)
253 * mips-opc.c: Fix typo/thinko in "eret" instruction.
256 Mon Jul 28 22:07:14 1997 Andrew Cagney <cagney@b1.cygnus.com>
258 * mips-opc.c: Fix coding of mtsa.
261 Thu Jul 24 13:03:26 1997 Doug Evans <dje@canuck.cygnus.com>
263 * sparc-opc.c (sparc_opcodes): Fix spelling on fpaddX, fpsubX insns.
265 * sparc-dis.c (sorted_opcodes): New static local.
266 (struct opcode_hash): `opcode' is pointer to const element.
267 (build_hash): First arg is now table of sorted pointers.
268 (print_insn_sparc): Sort opcodes by sorting table of pointers.
269 (compare_opcodes): Update.
271 Tue Jul 15 12:05:23 1997 Doug Evans <dje@canuck.cygnus.com>
273 * cgen-opc.c: #include <ctype.h>.
274 (hash_keyword_name): New arg `case_sensitive_p'. Callers updated.
275 Handle case insensitive hashing.
276 (hash_keyword_value): Change type of `value' to unsigned int.
278 Thu Jul 10 12:56:10 1997 Jeffrey A Law (law@cygnus.com)
280 * mips-opc.c (mips_builtin_opcodes): If an insn uses single
281 precision FP, mark it as such. Likewise for double precision
282 FP. Mark ISA1 insns. Consolidate duplicate opcodes where
285 (mips_builtin_opcodes): Remove non-existant r5900 instructions
289 Thu Jun 26 16:20:27 1997 Jeffrey A Law (law@cygnus.com)
291 * mips-opc.c (mips_builtin_opcodes): Add "pinteh", "pexeh" and
292 "pexew" as synonyms for "pintoh", "pexoh", "pexow".
295 Wed Jun 25 15:25:57 1997 Felix Lee <flee@cirdan.cygnus.com>
297 * ppc-opc.c (extract_nsi): make unsigned expression signed before
299 (UNUSED): remove one level of parens, so MSVC doesn't choke on
300 nesting depth when all the macros are expanded.
302 Tue Jun 17 17:02:17 1997 Ian Lance Taylor <ian@cygnus.com>
304 * sparc-opc.c: The fcmp v9a instructions take an integer register
305 as a destination, not a floating point register. From Christian
306 Kuehnke <Christian.Kuehnke@arbi.Informatik.Uni-Oldenburg.DE>.
308 Mon Jun 16 14:13:18 1997 Ian Lance Taylor <ian@cygnus.com>
310 * m68k-dis.c (print_insn_arg): Print case 7.2 using %pc@()
311 syntax. From Roman Hodek
312 <rnhodek@faui22c.informatik.uni-erlangen.de>.
314 * i386-dis.c (twobyte_has_modrm): Fix pand.
316 Mon Jun 16 14:08:38 1997 Michael Taylor <mbt@mit.edu>
318 * i386-dis.c (dis386_twobyte): Fix pand and pandn.
320 Tue Jun 10 11:26:47 1997 H.J. Lu <hjl@gnu.ai.mit.edu>
322 * arm-dis.c: Add prototypes for arm_decode_shift and
325 Mon Jun 2 11:39:04 1997 Gavin Koch <gavin@cygnus.com>
327 * mips-opc.c: Add r3900 insns.
329 Tue May 27 15:55:44 1997 Ian Lance Taylor <ian@cygnus.com>
331 * sh-dis.c (print_insn_shx): Change relmask to bfd_vma. Don't
332 print delay slot instructions on the same line. When using a PC
333 relative load, add a comment with the value being loaded if it can
336 Tue May 27 11:02:08 1997 Alan Modra <alan@spri.levels.unisa.edu.au>
338 * i386-dis.c (dis386[], dis386_twobyte[]): change pushl/popl
339 to pushS/popS for segment regs and byte constant so that
340 pushw/popw printed when in 16 bit data mode.
342 * i386-dis.c (dis386[]): change cwtl, cltd to cWtS, cStd to
343 print cbtw, cwtd in 16 bit data mode.
344 * i386-dis.c (putop): extra case W to support above.
346 * i386-dis.c (print_insn_x86): print addr32 prefix when given
347 address size prefix in 16 bit address mode.
349 Fri May 23 16:47:23 1997 Ian Lance Taylor <ian@cygnus.com>
351 * sh-dis.c: Reindent. Rename local variable fprintf to
354 Thu May 22 14:06:02 1997 Doug Evans <dje@canuck.cygnus.com>
356 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Undo patch of May 2.
358 Tue May 20 11:26:27 1997 Gavin Koch <gavin@cygnus.com>
360 * mips-opc.c (mips_builtin_opcodes): Moved INSN_ISA field into new
362 * mips16-opc.c (mip16_opcodes): same.
364 Mon May 12 15:10:53 1997 Jim Wilson <wilson@cygnus.com>
366 * m68k-opc.c (moveb): Change $d to %d.
368 Mon May 5 14:28:41 1997 Ian Lance Taylor <ian@cygnus.com>
370 * i386-dis.c: (dis386_twobyte): Add MMX instructions.
371 (twobyte_has_modrm): Likewise.
373 (OP_MMX, OP_EM, OP_MS): New static functions.
375 * i386-dis.c: Revert patch of April 4. The output now matches
378 Fri May 2 12:48:37 1997 Doug Evans <dje@canuck.cygnus.com>
380 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Use $uimm16 instead
383 Thu May 1 15:34:15 1997 Doug Evans <dje@canuck.cygnus.com>
385 * m32r-opc.h (CGEN_ARCH): Renamed from CGEN_CPU.
387 Tue Apr 15 12:40:08 1997 Ian Lance Taylor <ian@cygnus.com>
389 * Makefile.in (install): Depend upon installdirs.
390 (installdirs): New target.
392 Mon Apr 14 12:13:51 1997 Ian Lance Taylor <ian@cygnus.com>
394 From Thomas Graichen <graichen@rzpd.de>:
395 * configure.in: Use ${CONFIG_SHELL} when running $ac_config_sub.
396 * configure: Rebuild.
398 Sun Apr 13 17:50:41 1997 Doug Evans <dje@canuck.cygnus.com>
400 * cgen-*.c, m32r-*.c: #include sysdep.h instead of config.h.
401 Delete string{,s}.h support.
403 Thu Apr 10 14:44:56 1997 Doug Evans <dje@canuck.cygnus.com>
405 * cgen-asm.c (cgen_parse_operand_fn): New global.
406 (cgen_parse_{{,un}signed_integer,address}): Update call to
407 cgen_parse_operand_fn.
408 (cgen_init_parse_operand): New function.
409 * m32r-asm.c (parse_insn_normal): cgen_init_parse_operand renamed
410 from cgen_asm_init_parse.
411 (m32r_cgen_assemble_insn): New operand `errmsg'.
412 Delete call to as_bad, return error message to caller.
413 (m32r_cgen_asm_hash_keywords): #if 0 out.
415 Wed Apr 9 12:05:25 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
417 * m68k-dis.c (print_insn_arg) [case 'd']: Print as address register,
419 [case 'J']: Fix typo in register name.
421 Mon Apr 7 16:48:22 1997 Ian Lance Taylor <ian@cygnus.com>
423 * configure.in: Substitute SHLIB_LIBS.
424 * configure: Rebuild.
425 * Makefile.in (SHLIB_LIBS): New variable.
426 ($(SHLIB)): Use $(SHLIB_LIBS).
428 Mon Apr 7 11:45:44 1997 Doug Evans <dje@canuck.cygnus.com>
430 * cgen-dis.c (build_dis_hash_table): Fix xmalloc size computation.
432 * cgen-opc.c (hash_keyword_name): Improve algorithm.
434 * disassemble.c (disassembler): Handle m32r.
436 Fri Apr 4 12:29:38 1997 Doug Evans <dje@canuck.cygnus.com>
438 * m32r-asm.c, m32r-dis.c, m32r-opc.c, m32r-opc.h: New files.
439 * cgen-asm.c, cgen-dis.c, cgen-opc.c: New files.
440 * Makefile.in (CFILES): Add them.
441 (ALL_MACHINES): Add them.
442 (dependencies): Regenerate.
443 * configure.in (cgen_files): New variable.
444 (bfd_m32r_arch): Add entry.
445 * configure: Regenerate.
447 Fri Apr 4 14:04:16 1997 Ian Lance Taylor <ian@cygnus.com>
449 * configure.in: Correct file names for bfd_mn10[23]00_arch.
450 * configure: Rebuild.
452 * Makefile.in: Rebuild dependencies.
454 * d10v-dis.c: Include "ansidecl.h" before "opcode/d10v.h".
456 * i386-dis.c (float_reg): Swap fsubrp and fsubp. Swap fdivrp and
459 Thu Apr 3 13:22:45 1997 Ian Lance Taylor <ian@cygnus.com>
461 * Branched binutils 2.8.
463 Wed Apr 2 12:23:53 1997 Ian Lance Taylor <ian@cygnus.com>
465 * m10200-dis.c: Rename from mn10200-dis.c.
466 * m10200-opc.c: Rename from mn10200-opc.c.
467 * m10300-dis.c: Rename from mn10300-dis.c
468 * m10300-opc.c: Rename from mn10300-opc.c.
469 * Makefile.in: Update accordingly.
471 * mips16-opc.c: Add mul and dmul macros.
473 Tue Apr 1 16:27:45 1997 Klaus Kaempf <kkaempf@progis.de>
475 * makefile.vms: Update CFLAGS, add clean target.
477 Fri Mar 28 12:10:09 1997 Ian Lance Taylor <ian@cygnus.com>
479 * mips-opc.c: Add "wait". From Ralf Baechle
480 <ralf@gnu.ai.mit.edu>.
482 * configure.in: Add stdlib.h to AC_CHECK_HEADERS list.
483 * configure, config.in: Rebuild.
484 * sysdep.h: Include <stdlib.h> if it exists.
485 * sparc-dis.c: Include <stdio.h> and "sysdep.h". Don't include
487 * Makefile.in: Rebuild dependencies.
489 Thu Mar 27 14:24:43 1997 Ian Lance Taylor <ian@cygnus.com>
491 * ppc-opc.c: Add PPC 403 instructions and extended opcodes. From
492 Andrew Bray <andy@madhouse.demon.co.uk>.
494 * mips-opc.c: Add cast when setting mips_opcodes.
496 Tue Mar 25 23:04:00 1997 Stu Grossman (grossman@critters.cygnus.com)
498 * v850-dis.c (disassemble): Fix sign extension problem.
499 * v850-opc.c (extract_d*): Fix sign extension problems to make
500 disassembly calculate branch offsets correctly.
502 Mon Mar 24 13:22:13 1997 Ian Lance Taylor <ian@cygnus.com>
504 * sh-opc.h: Add bf/s and bt/s as synonyms for bf.s and bt.s.
506 * mips-opc.c: Add dctr and dctw.
509 Sun Mar 23 18:08:10 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
511 * d30v-dis.c (print_insn): Change the way signed constants
514 Fri Mar 21 14:37:52 1997 Ian Lance Taylor <ian@cygnus.com>
516 * Makefile.in (BFD_H): New variable.
517 (HFILES): New variable.
518 (CFILES): Add all C files.
519 (.dep, .dep1, dep.sed, dep, dep-in): New targets.
520 Delete old dependencies, and build new ones.
521 * dep-in.sed: New file.
523 Thu Mar 20 19:03:30 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
525 * m68k-opc.c (m68k_opcode_aliases): Added blo and blo{s,b,w,l}.
527 start-sanitize-coldfire
528 Wed Mar 19 06:53:58 1997 J.T. Conklin <jtc@rtl.cygnus.com>
530 * m68k-opc.c (m68k_opcodes): Provide coldfire division module
533 end-sanitize-coldfire
534 Tue Mar 18 14:17:03 1997 Jeffrey A Law (law@cygnus.com)
536 * mn10200-opc.c: Change "trap" to "syscall".
537 * mn10300-opc.c: Add new "syscall" instruction.
539 Mon Mar 17 08:48:03 1997 J.T. Conklin <jtc@beauty.cygnus.com>
541 * m68k-opc.c (m68k_opcodes): Provide correct entries for mulsl and
542 mulul insns on the coldfire.
544 Sat Mar 15 17:13:05 1997 Ian Lance Taylor <ian@cygnus.com>
546 * arm-dis.c (print_insn_arm): Don't print instruction bytes.
547 (print_insn_big_arm): Set bytes_per_chunk and display_endian.
548 (print_insn_little_arm): Likewise.
550 Fri Mar 14 15:08:59 1997 Ian Lance Taylor <ian@cygnus.com>
552 Based on patches from H.J. Lu <hjl@lucon.org>:
553 * i386-dis.c (fetch_data): Add prototype.
554 * m68k-dis.c (fetch_data): Add prototype.
555 (dummy_print_address): Add prototype. Make static.
556 * ppc-opc.c (valid_bo): Add prototype.
557 * sparc-dis.c (build_hash_table): Add prototype.
558 (is_delayed_branch, compute_arch_mask): Add prototypes.
559 (print_insn_sparc): Make several local variables const.
560 (compare_opcodes): Change arguments to const PTR. Add prototype.
561 * sparc-opc.c (arg): Change name field to be const.
562 (lookup_name, lookup_value): Add prototypes. Change table and
563 name parameters to be const.
564 (sparc_encode_asi): Change name parameter to be const.
565 (sparc_encode_membar, sparc_encode_prefetch): Likewise.
566 (sparc_encode_sparclet_cpreg): Likewise.
567 (sparc_decode_asi): Change return type to be const.
568 (sparc_decode_membar, sparc_decode_prefetch): Likewise.
569 (sparc_decode_sparclet_cpreg): Likewise.
571 Fri Mar 7 10:51:49 1997 Ian Lance Taylor <ian@cygnus.com>
573 * Makefile.in ($(SHLINK)): Just use ln -s, not ln -sf, since
574 Solaris doesn't like the combined options, and the -f is
576 (stamp-tshlink, install): Likewise.
578 Thu Mar 6 16:51:11 1997 Jeffrey A Law (law@cygnus.com)
580 * mn10300-opc.c (IMM16_PCREL, SD8N_PCREL, D16_SHIFT): Mark these
583 Tue Mar 4 06:10:36 1997 J.T. Conklin <jtc@cygnus.com>
585 * m68k-opc.c (m68k_opcodes): Fix last change for the mc68010.
587 Mon Mar 3 07:45:20 1997 J.T. Conklin <jtc@cygnus.com>
589 * m68k-opc.c (m68k_opcodes): Added entries for the tst insns on
592 Thu Feb 27 14:04:32 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
594 * m68k-opc.c (m68k_opcodes): Added swbegl pseudo-instruction.
597 Thu Feb 27 11:36:41 1997 Michael Meissner <meissner@cygnus.com>
599 * tic80-dis.c (print_insn_tic80): Set info->bytes_per_line to 8.
601 Wed Feb 26 15:34:48 1997 Michael Meissner <meissner@cygnus.com>
603 * tic80-opc.c (tic80_predefined_symbols): Define r25 properly.
606 Wed Feb 26 13:38:30 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
608 * m68k-dis.c (NEXTSINGLE, NEXTDOUBLE, NEXTEXTEND): Use
609 floatformat_to_double to make portable.
610 (print_insn_arg): Use NEXTEXTEND macro when extracting extended
613 Mon Feb 24 19:26:12 1997 Dawn Perchik <dawn@cygnus.com>
615 * mips-opc.c: Initialize mips_opcodes to mips_builtin_opcodes,
616 and bfd_mips_num_opcodes to bfd_mips_num_builtin_opcodes.
618 Mon Feb 24 15:19:01 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
620 * d10v-dis.c, d10v-opc.c: Change pre_defined_registers to
621 d10v_predefined_registers and reg_name_cnt to d10v_reg_name_cnt.
624 Mon Feb 24 14:33:26 1997 Fred Fish <fnf@cygnus.com>
626 * tic80-opc.c (LSI_SCALED): Renamed from this ...
627 (OFF_SL_BR_SCALED): ... to this, and added the flag
628 TIC80_OPERAND_BASEREL to the flags word.
629 (tic80_opcodes): Replace all occurances of LSI_SCALED with
633 Sat Feb 22 21:25:00 1997 Dawn Perchik <dawn@cygnus.com>
635 * mips-opc.c: Add macros for cop0, cop1 cop2 and cop3.
636 Change mips_opcodes from const array to a pointer,
637 and change bfd_mips_num_opcodes from const int to int,
638 so that we can increase the size of the mips opcodes table
642 Sat Feb 22 21:03:47 1997 Fred Fish <fnf@cygnus.com>
644 * tic80-opc.c (tic80_predefined_symbols): Revert change to
645 store BITNUM values in the table in one's complement form
646 to match behavior when assembler is given a raw numeric
647 value for a BITNUM operand.
648 * tic80-dis.c (print_operand_bitnum): Ditto.
652 Fri Feb 21 16:31:18 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
654 * d30v-opc.c: Removed references to FLAG_X.
657 Wed Feb 19 14:51:20 1997 Ian Lance Taylor <ian@cygnus.com>
659 * Makefile.in: Add dependencies on ../bfd/bfd.h as required.
662 Tue Feb 18 17:43:43 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
664 * Makefile.in: Added d30v object files.
665 * configure: (bfd_d30v_arch) Rebuilt.
666 * configure.in: (bfd_d30v_arch) Added new case.
667 * d30v-dis.c: New file.
668 * d30v-opc.c: New file.
669 * disassemble.c (disassembler) Add entry for d30v.
673 Tue Feb 18 16:32:08 1997 Fred Fish <fnf@cygnus.com>
675 * tic80-opc.c (tic80_predefined_symbols): Add symbolic
676 representations for the floating point BITNUM values.
678 Fri Feb 14 12:14:05 1997 Fred Fish <fnf@cygnus.com>
680 * tic80-opc.c (tic80_predefined_symbols): Store BITNUM values
681 in the table in one's complement form, as they appear in the
683 (tic80_symbol_to_value): Use macros to access predefined
685 (tic80_value_to_symbol): Ditto.
686 (tic80_next_predefined_symbol): New function.
687 * tic80-dis.c (print_operand_bitnum): Remove code that did
688 one's complement for BITNUM values.
692 Fri Feb 14 13:56:51 1997 Gavin Koch <gavin@cygnus.com>
694 * mips-opc.c: bug fix, can't mark insns INSN_5900 and INSN_ISA4
697 Thu Feb 13 21:56:51 1997 Klaus Kaempf <kkaempf@progis.de>
699 * makefile.vms: Remove 8 bit characters. Update to latest
702 Thu Feb 13 20:41:22 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
704 * m68k-opc.c (m68k_opcodes): Add swbeg pseudo-instruction.
706 Thu Feb 13 16:30:02 1997 Jeffrey A Law (law@cygnus.com)
708 * mn10200-opc.c (IMM16_PCREL): This is a signed operand.
709 (IMM24_PCREL): Likewise.
711 Thu Feb 13 13:28:43 1997 Ian Lance Taylor <ian@cygnus.com>
713 * mips-dis.c (print_mips16_insn_arg): Use memaddr - 2 as the base
714 address for an extended PC relative instruction that is not a
717 Wed Feb 12 12:27:40 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
719 * m68k-dis.c (print_insn_m68k): Set bytes_per_chunk and
723 Tue Feb 11 16:36:31 1997 Fred Fish <fnf@cygnus.com>
725 * tic80-opc.c (tic80_operands): Fix typo '+' -> '|'.
726 (tic80_opcodes): Sort entries so that long immediate forms
727 come after short immediate forms, making it easier for
728 assembler to select the right one for a given operand.
731 Tue Feb 11 15:26:47 1997 Ian Lance Taylor <ian@cygnus.com>
733 * mips-dis.c (_print_insn_mips): Set bytes_per_chunk and
735 (print_insn_mips16): Likewise.
738 Fri Feb 7 11:12:44 1997 Gavin Koch <gavin@cygnus.com>
740 * mips-opc.c: add r5900.
744 Mon Feb 10 10:12:41 1997 Fred Fish <fnf@cygnus.com>
746 * tic80-opc.c (tic80_symbol_to_value): Changed to accept
747 a symbol class that restricts translation to just that
748 class (general register, condition code, etc).
750 Thu Feb 6 17:34:09 1997 Fred Fish <fnf@cygnus.com>
752 * tic80-opc.c (tic80_operands): Add REG_0_E, REG_22_E,
753 and REG_DEST_E for register operands that have to be
754 an even numbered register. Add REG_FPA for operands that
755 are one of the floating point accumulator registers.
756 Add TIC80_OPERAND_MASK to flags for ENDMASK operand.
757 (tic80_opcodes): Change entries that need even numbered
758 register operands to use the new operand table entries.
759 Add "or" entries that are identical to "or.tt" entries.
762 Wed Feb 5 11:12:44 1997 Ian Lance Taylor <ian@cygnus.com>
764 * mips16-opc.c: Add new cases of exit instruction for
766 * mips-dis.c (print_mips16_insn_arg): Display floating point
767 registers in operands of exit instruction. Print `$' before
768 register names in operands of entry and exit instructions.
771 Thu Jan 30 14:09:03 1997 Fred Fish <fnf@cygnus.com>
773 * tic80-opc.c (tic80_predefined_symbols): Table of name/value
774 pairs for all predefined symbols recognized by the assembler.
775 Also used by the disassembling routines.
776 (tic80_symbol_to_value): New function.
777 (tic80_value_to_symbol): New function.
778 * tic80-dis.c (print_operand_control_register,
779 print_operand_condition_code, print_operand_bitnum):
780 Remove private tables and use tic80_value_to_symbol function.
783 Thu Jan 30 11:30:45 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
785 * d10v-dis.c (print_operand): Change address printing
786 to correctly handle PC wrapping. Fixes PR11490.
788 Wed Jan 29 09:39:17 1997 Jeffrey A Law (law@cygnus.com)
790 * mn10200-opc.c (mn10200_operands): Make 8 and 16 bit pc-relative
793 Tue Jan 28 15:57:34 1997 Ian Lance Taylor <ian@cygnus.com>
795 * mips-dis.c (print_insn_mips16): Set insn_info information.
796 (print_mips16_insn_arg): Likewise.
798 * mips-dis.c (print_insn_mips16): Better handling of an extend
799 opcode followed by an instruction which can not be extended.
801 Fri Jan 24 12:08:21 1997 J.T. Conklin <jtc@cygnus.com>
803 * m68k-opc.c (m68k_opcodes): Changed operand specifier for the
804 coldfire moveb instruction to not allow an address register as
805 destination. Although the documentation does not indicate that
806 this is invalid, experiments uncovered unexpected behavior.
807 Added a comment explaining the situation. Thanks to Andreas
808 Schwab for pointing this out to me.
811 Wed Jan 22 20:13:51 1997 Fred Fish <fnf@cygnus.com>
813 * tic80-opc.c (tic80_opcodes): Expand comment to note that the
814 entries are presorted so that entries with the same mnemonic are
815 adjacent to each other in the table. Sort the entries for each
816 instruction so that this is true.
819 Mon Jan 20 12:48:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
821 * m68k-dis.c: Include <libiberty.h>.
822 (print_insn_m68k): Sort the opcode table on the most significant
823 nibble of the opcode.
826 Sat Jan 18 15:15:05 1997 Fred Fish <fnf@cygnus.com>
828 * tic80-dis.c (tic80_opcodes): Add "wrcr", "vmpy", "vrnd",
829 "vsub", "vst", "xnor", and "xor" instructions.
830 (V_a1): Renamed from V_a, msb of accumulator reg number.
831 (V_a0): Add macro, lsb of accumulator reg number.
833 Fri Jan 17 18:24:31 1997 Fred Fish <fnf@cygnus.com>
835 * tic80-dis.c (print_insn_tic80): Broke excessively long
836 function up into several smaller ones and arranged for
837 the instruction printing function to be callable recursively
838 to print vector instructions that have both a load and a
839 math instruction packed into a single opcode.
840 * tic80-opc.c (tic80_opcodes): Expand comment for vld opcode
841 to explain why it comes after the other vector opcodes.
844 Fri Jan 17 16:19:15 1997 J.T. Conklin <jtc@beauty.cygnus.com>
846 * m68k-opc.c (m68k_opcodes): add b, w, or l specifier to coldfire
847 move insns to handle immediate operands.
849 Thu Jan 17 16:19:00 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
851 * m68k-opc.c (m68k_opcodes): Delete duplicate entry for "cmpil".
852 fix operand mask in the "moveml" entries for the coldfire.
855 Thu Jan 16 20:54:40 1997 Fred Fish <fnf@cygnus.com>
857 * tic80-opc.c (V_a, V_m, V_S, V_Z, V_p, OP_V, MASK_V):
858 New macros for building vector instruction opcodes.
859 (tic80_opcodes): Remove all uses of FMT_SI, FMT_REG, and
860 FMT_LI, which were unused. The field is now a flags field.
861 Remove some opcodes that are possible, but illegal, such
862 as long immediate instructions with doubles for immediate
863 values. Add "vadd" and "vld" instructions.
865 Wed Jan 15 18:59:51 1997 Fred Fish <fnf@cygnus.com>
867 * tic80-opc.c (tic80_operands): Reorder some table entries to make
868 the order more logical. Move the shift alias instructions ("rotl",
869 "shl", "ins", "rotr", "extu", "exts", "srl", and "sra" to be
870 interspersed with the regular sr.x and sl.x instructions. Add
871 and test new instruction opcodes for "sl", "sli", "sr", "sri", "st",
872 "sub", "subu", "swcr", and "trap".
874 Tue Jan 14 19:42:50 1997 Fred Fish <fnf@cygnus.com>
876 * tic80-opc.c (OFF_SS_PC): Renamed from OFF_SS.
877 (OFF_SL_PC): Renamed from OFF_SL.
878 (OFF_SS_BR): New operand type for base relative operand.
879 (OFF_SL_BR): New operand type for base relative operand.
880 (REG_BASE): New operand type for base register operand.
881 (tic80_opcodes): Add and test "fmpy", "frndm", "frndn", "frndp",
882 "frndz", "fsqrt", "fsub", "illop0", "illopF", "ins", "jsr",
883 "ld", "ld.u", "lmo", "or", "rdcr", "rmo", "rotl", and "rotr"
885 * tic80-dis.c (print_insn_tic80): Print opcode name with fixed width
886 10 char field, padded with spaces on rhs, rather than a string
887 followed by a tab. Use renamed TIC80_OPERAND_PCREL flag bit rather
888 than old TIC80_OPERAND_RELATIVE. Add support for new
889 TIC80_OPERAND_BASEREL flag bit.
891 Mon Jan 13 15:58:56 1997 Fred Fish <fnf@cygnus.com>
893 * tic80-dis.c (print_insn_tic80): Print floating point operands
895 * tic80-opc.c (SPFI): Add single precision floating point
896 immediate operand type.
897 (ROTATE): Add rotate operand type for shifts.
898 (ENDMASK): Add for shifts.
899 (n): Macro for the 'n' bit.
900 (i): Macro for the 'i' bit.
901 (PD): Macro for the 'PD' field.
902 (P2): Macro for the 'P2' field.
903 (P1): Macro for the 'P1' field.
904 (tic80_opcodes): Add entries for "exts", "extu", "fadd",
908 Mon Jan 6 15:06:55 1997 Jeffrey A Law (law@cygnus.com)
910 * mn10200-dis.c (disassemble): Mask off unwanted bits after
911 adding in current address for pc-relative operands.
914 Mon Jan 6 10:56:25 1997 Fred Fish <fnf@cygnus.com>
916 * tic80-dis.c (R_SCALED): Add macro to test for ":s" modifier bit.
917 (print_insn_tic80): If R_SCALED then print ":s" modifier for operand.
918 * tic80-opc.c (REG0, REG22, REG27, SSOFF, LSOFF): Names
919 changed to REG_0, REG_22, REG_DEST, OFF_SS, OFF_SL respectively.
920 (SICR, LICR, REGM_SI, REGM_LI): Names changed to CR_SI, CR_LI,
921 REG_BASE_M_SI, REG_BASE_M_LI respectively.
922 (REG_SCALED, LSI_SCALED): New operand types.
923 (E): New macro for 'E' bit at bit 27.
924 (tic80_opcodes): Add and test dld, dld.u, dst, estop, and etrap
925 opcodes, including the various size flavors (b,h,w,d) for
926 the direct load and store instructions.
928 Sun Jan 5 12:18:14 1997 Fred Fish <fnf@cygnus.com>
930 * tic80-dis.c (M_SI, M_LI): Add macros to test for ":m" modifier bit
932 * tic80-dis.c (print_insn_tic80): Change comma and paren handling.
933 Use M_SI and M_LI macros to check for ":m" modifier for GPR operands.
934 * tic80-opc.c (tic80_operands): Add REGM_SI and REGM_LI operands.
935 (F, M_REG, M_LI, M_SI, SZ_REG, SZ_LI, SZ_SI, D, S): New bit-twiddlers.
936 (MASK_LI_M, MASK_SI_M, MASK_REG_M): Remove and replace in opcode
937 masks with "MASK_* & ~M_*" to get the M bit reset.
938 (tic80_opcodes): Add bsr, bsr.a, cmnd, cmp, dcachec, and dcachef.
940 Sat Jan 4 19:05:05 1997 Fred Fish <fnf@cygnus.com>
942 * tic80-dis.c (print_insn_tic80): Print TIC80_OPERAND_RELATIVE
943 correctly. Add support for printing TIC80_OPERAND_BITNUM and
944 TIC80_OPERAND_CC, and TIC80_OPERAND_CR operands in symbolic
946 * tic80-opc.c (tic80_operands): Add SSOFF, LSOFF, BITNUM,
947 CC, SICR, and LICR table entries.
948 (tic80_opcodes): Add and test "nop", "br", "bbo", "bbz",
949 "bcnd", and "brcr" opcodes.
952 Fri Jan 3 18:32:11 1997 Fred Fish <fnf@cygnus.com>
954 * ppc-opc.c (powerpc_operands): Make comment match the
955 actual fields (no shift field).
956 * sparc-opc.c (sparc_opcodes): Document why this cannot be "const".
958 * tic80-dis.c (print_insn_tic80): Replace abort stub with a
959 partial implementation, work in progress.
960 * tic80-opc.c (tic80_operands): Begin construction operands table.
961 (tic80_opcodes): Continue populating opcodes table and start
962 filling in the operand indices.
963 (tic80_num_opcodes): Add this.
966 Fri Jan 3 12:13:52 1997 Ian Lance Taylor <ian@cygnus.com>
968 * m68k-opc.c: Add #B case for moveq.
970 Thu Jan 2 12:14:29 1997 Jeffrey A Law (law@cygnus.com)
972 * mn10300-dis.c (disassemble): Make sure all variables are initialized
973 before they are used.
975 Tue Dec 31 12:20:38 1996 Jeffrey A Law (law@cygnus.com)
977 * v850-opc.c (v850_opcodes): Put curly-braces around operands
978 for "breakpoint" instruction.
980 Tue Dec 31 15:38:13 1996 Ian Lance Taylor <ian@cygnus.com>
982 * Makefile.in (ALL_CFLAGS): Add -D_GNU_SOURCE.
983 (dep): Use ALL_CFLAGS rather than CFLAGS.
985 Tue Dec 31 15:09:16 1996 Michael Meissner <meissner@tiktok.cygnus.com>
987 * v850-opc.c (D8_{6,7}): Set V850_OPERAND_ADJUST_SHORT_MEMORY
990 Mon Dec 30 17:02:11 1996 Fred Fish <fnf@cygnus.com>
992 * Makefile.in (m68k-opc.o, alpha-opc.o): Remove dis-asm.h dependency.
994 (tic80-dis.o, tic80-opc.o): Add rules per comment in Makefile.in.
997 Mon Dec 30 11:38:01 1996 Ian Lance Taylor <ian@cygnus.com>
999 * mips16-opc.c: Add "abs".
1001 start-sanitize-tic80
1002 Sun Dec 29 10:58:22 1996 Fred Fish <fnf@cygnus.com>
1004 * Makefile.in (ALL_MACHINES): Add tic80-dis.o and tic80-opc.o.
1005 * disassemble.c (ARCH_tic80): Define if ARCH_all is defined.
1006 (disassembler): Add bfd_arch_tic80 support to set disassemble
1007 to print_insn_tic80.
1008 * tic80-dis.c (print_insn_tic80): Add stub.
1010 Fri Dec 27 22:30:57 1996 Fred Fish <fnf@cygnus.com>
1012 * configure.in (arch in $selarchs): Add bfd_tic80_arch entry.
1013 * configure: Regenerate with autoconf.
1014 * tic80-dis.c: Add file.
1015 * tic80-opc.c: Add file.
1018 Fri Dec 20 14:30:19 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1020 * d10v-opc.c (pre_defined_registers): Add cr[0-15], dpc, dpsw, link.
1022 Mon Dec 16 13:00:15 1996 Jeffrey A Law (law@cygnus.com)
1024 * mn10200-opc.c (mn10200_operands): Add SIMM16N.
1025 (mn10200_opcodes): Use it for some logicals and btst insns.
1026 Add "break" and "trap" instructions.
1028 * mn10300-opc.c (mn10300_opcodes): Add "break" instruction.
1030 * mn10200-opc.c: Add pseudo-ops for "mov (an),am" and "mov an,(am)".
1032 Sat Dec 14 22:36:20 1996 Ian Lance Taylor <ian@cygnus.com>
1034 * mips-dis.c (print_mips16_insn_arg): The base address of a PC
1035 relative load or add now depends upon whether the instruction is
1038 Wed Dec 11 09:23:46 1996 Jeffrey A Law (law@cygnus.com)
1040 * mn10200-dis.c: Finish writing disassembler.
1041 * mn10200-opc.c (mn10200_opcodes): Fix mask for "mov imm8,dn".
1042 Fix mask for "jmp (an)".
1044 * mn10300-dis.c (disassemble, print_insn_mn10300): Corrently
1045 handle endianness issues for mn10300.
1047 * mn10200-opc.c (mn10200_opcodes): Fix operands for "movb dm,(an)".
1049 Tue Dec 10 12:08:05 1996 Jeffrey A Law (law@cygnus.com)
1051 * mn10200-opc.c (mn10200_opcodes): "mov imm8,d0" is a format 2
1052 instruction. Fix opcode field for "movb (imm24),dn".
1054 * mn10200-opc.c (mn10200_operands): Fix insertion position
1057 Mon Dec 9 16:42:43 1996 Jeffrey A Law (law@cygnus.com)
1059 * mn10200-opc.c: Create mn10200 opcode table.
1060 * mn10200-dis.c: Flesh out mn10200 disassembler. Not ready,
1061 but moving along nicely.
1063 Sun Dec 8 04:28:31 1996 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1065 * Makefile.in (ALL_MACHINES): Add mips16-opc.o.
1067 Fri Dec 6 16:47:40 1996 J.T. Conklin <jtc@rhino.cygnus.com>
1069 * m68k-opc.c (m68k_opcodes): Revert change to use < and >
1070 specifiers for fmovem* instructions.
1072 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
1074 * mn10300-dis.c (disassemble): Remove '$' register prefixing.
1076 Fri Dec 6 17:34:39 1996 Ian Lance Taylor <ian@cygnus.com>
1078 * mips16-opc.c: Change opcode for entry/exit to avoid conflicting
1081 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
1083 * mn10300-opc.c: Add some comments explaining the various
1086 * mn10300-dis.c (disassemble): Fix minor gcc -Wall warnings.
1088 Thu Dec 5 12:09:48 1996 J.T. Conklin <jtc@rtl.cygnus.com>
1090 * m68k-dis.c (print_insn_arg): Handle new < and > operand
1093 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
1094 operand specifiers in fmovm* instructions.
1096 Wed Dec 4 14:52:18 1996 Ian Lance Taylor <ian@cygnus.com>
1098 * ppc-opc.c (insert_li): Give an error if the offset has the two
1099 least significant bits set.
1101 Wed Nov 27 13:09:01 1996 Ian Lance Taylor <ian@cygnus.com>
1103 * mips-dis.c (print_insn_mips16): Separate the instruction from
1104 the arguments with a tab, not a space.
1106 Tue Nov 26 13:24:17 1996 Jeffrey A Law (law@cygnus.com)
1108 * mn10300-dis.c (disasemble): Finish conversion to '$' as
1111 * mn10300-opc.c (mn10300_opcodes): Fix mask field for
1114 Tue Nov 26 10:53:21 1996 Ian Lance Taylor <ian@cygnus.com>
1116 * configure: Rebuild with autoconf 2.12.
1118 Add support for mips16 (16 bit MIPS implementation):
1119 * mips16-opc.c: New file.
1120 * mips-dis.c: Include "elf-bfd.h" and "elf/mips.h".
1121 (mips16_reg_names): New static array.
1122 (print_insn_big_mips): Use print_insn_mips16 in 16 bit mode or
1123 after seeing a 16 bit symbol.
1124 (print_insn_little_mips): Likewise.
1125 (print_insn_mips16): New static function.
1126 (print_mips16_insn_arg): New static function.
1127 * mips-opc.c: Add jalx instruction.
1128 * Makefile.in (mips16-opc.o): New target.
1129 * configure.in: Use mips16-opc.o for bfd_mips_arch.
1130 * configure: Rebuild.
1132 Mon Nov 25 16:15:17 1996 J.T. Conklin <jtc@cygnus.com>
1134 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
1135 operand specifiers in *save, *restore and movem* instructions.
1137 * m68k-opc.c (m68k_opcodes): Fix move and movem instructions for
1140 * m68k-opc.c (m68k_opcodes): The coldfire (mcf5200) can only use
1141 register operands for immediate arithmetic, not, neg, negx, and
1142 set according to condition instructions.
1144 * m68k-opc.c (m68k_opcodes): Consistantly Use "s" as the storage
1145 specifier of the effective-address operand in immediate forms of
1146 arithmetic instructions. The specifier for the immediate operand
1147 notes how and where the constant will be stored.
1149 Mon Nov 25 11:17:01 1996 Jeffrey A Law (law@cygnus.com)
1151 * mn10300-opc.c (mn10300_opcodes): Remove redundant "lcc"
1154 * mn10300-dis.c (disassemble): Use '$' instead of '%' for
1157 * mn10300-dis.c (disassemble): Prefix registers with '%'.
1159 Wed Nov 20 10:37:13 1996 Jeffrey A Law (law@cygnus.com)
1161 * mn10300-dis.c (disassemble): Handle register lists.
1163 * mn10300-opc.c: Fix handling of register list operand for
1164 "call", "ret", and "rets" instructions.
1166 * mn10300-dis.c (disassemble): Print PC-relative and memory
1167 addresses symbolically if possible.
1168 * mn10300-opc.c: Distinguish between absolute memory addresses,
1169 pc-relative offsets & random immediates.
1171 * mn10300-dis.c (print_insn_mn10300): Fix fetch of last byte
1173 (disassemble): Handle SPLIT and EXTENDED operands.
1175 Tue Nov 19 13:33:01 1996 Jeffrey A Law (law@cygnus.com)
1177 * mn10300-dis.c: Rough cut at printing some operands.
1179 * mn10300-dis.c: Start working on disassembler support.
1180 * mn10300-opc.c (mn10300_opcodes): Fix masks on several insns.
1182 * mn10300-opc.c (mn10300_operands): Add "REGS" for a register
1184 (mn10300_opcodes): Use REGS for register list in "movm" instructions.
1186 Mon Nov 18 15:20:35 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1188 * d10v-opc.c (d10v_opcodes): Add3 sets the carry.
1190 Fri Nov 15 13:43:19 1996 Jeffrey A Law (law@cygnus.com)
1192 * mn10300-opc.c (mn10300_opcodes): Demand parens around
1193 register argument is calls and jmp instructions.
1195 Thu Nov 7 00:26:05 1996 Jeffrey A Law (law@cygnus.com)
1197 * mn10300-opc.c (mn10300_opcodes): Use DN01 for putx and
1198 getx operand. Fix opcode for mulqu imm,dn.
1200 Wed Nov 6 13:42:32 1996 Jeffrey A Law (law@cygnus.com)
1202 * mn10300-opc.c (mn10300_operands): Hijack "bits" field
1203 in MN10300_OPERAND_SPLIT operands for how many bits
1204 appear in the basic insn word. Add IMM32_HIGH24,
1205 IMM32_HIGH24_LOWSHIFT8, IMM8E_SHIFT8.
1206 (mn10300_opcodes): Use new operands as needed.
1208 * mn10300-opc.c (mn10300_operands): Add IMM32_LOWSHIFT8
1209 for bset, bclr, btst instructions.
1210 (mn10300_opcodes): Use new IMM32_LOWSHIFT8 as needed.
1212 * mn10300-opc.c (mn10300_operands): Remove many redundant
1213 operands. Update opcode table as appropriate.
1214 (IMM32): Add MN10300_OPERAND_SPLIT flag.
1215 (mn10300_opcodes): Fix single bit error in mov imm32,dn insn.
1217 Tue Nov 5 13:26:58 1996 Jeffrey A Law (law@cygnus.com)
1219 * mn10300-opc.c (mn10300_operands): Add DN2, DM2, AN2, AM2
1220 operands (for indexed load/stores). Fix bitpos for DI
1221 operand. Add SN8N_SHIFT8, IMM8_SHIFT8, and D16_SHIFT for the
1222 few instructions that insert immediates/displacements in the
1223 middle of the instruction. Add IMM8E for 8 bit immediate in
1224 the extended part of an instruction.
1225 (mn10300_operands): Use new opcodes as appropriate.
1227 Tue Nov 5 10:30:51 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1229 * d10v-opc.c (d10v_opcodes): Declare the trap instruction
1230 sequential so the assembler never parallelizes it with
1233 Mon Nov 4 12:50:40 1996 Jeffrey A Law (law@cygnus.com)
1235 * mn10300-opc.c (mn10300_operands): Add DN01 and AN01 for
1236 a data/address register that appears in register field 0
1237 and register field 1.
1238 (mn10300_opcodes): Use DN01 and AN01 for mov/cmp imm8,DN/AN
1240 Fri Nov 1 10:29:11 1996 Richard Henderson <rth@tamu.edu>
1242 * alpha-dis.c (print_insn_alpha): Use new NOPAL mask for
1243 standard disassembly.
1245 * alpha-opc.c (alpha_operands): Rearrange flags slot.
1246 (alpha_opcodes): Add new BWX, CIX, and MAX instructions.
1247 Recategorize PALcode instructions.
1249 Wed Oct 30 16:46:58 1996 Jeffrey A Law (law@cygnus.com)
1251 * v850-opc.c (v850_opcodes): Add relaxing "jbr".
1253 Tue Oct 29 16:30:28 1996 Ian Lance Taylor <ian@cygnus.com>
1255 * mips-dis.c (_print_insn_mips): Don't print a trailing tab if
1256 there are no operand types.
1258 Tue Oct 29 12:22:21 1996 Jeffrey A Law (law@cygnus.com)
1260 * v850-opc.c (D9_RELAX): Renamed from D9, all references
1262 (v850_operands): Make sure D22 immediately follows D9_RELAX.
1264 Fri Oct 25 12:12:53 1996 Ian Lance Taylor <ian@cygnus.com>
1266 * i386-dis.c (print_insn_x86): Set info->bytes_per_line to 5.
1268 Thu Oct 24 17:53:52 1996 Jeffrey A Law (law@cygnus.com)
1270 * v850-opc.c (insert_d8_6): Fix operand insertion for sld.w
1271 and sst.w instructions.
1273 * v850-opc.c (v850_opcodes): Add "jCC" instructions (aliases for
1276 Thu Oct 24 17:21:20 1996 Ian Lance Taylor <ian@cygnus.com>
1278 * mips-dis.c (_print_insn_mips): Use a tab between the instruction
1281 Tue Oct 22 23:32:56 1996 Ian Lance Taylor <ian@cygnus.com>
1283 * ppc-opc.c (PPCPWR2): Define.
1284 (powerpc_opcodes): Use PPCPWR2 for fsqrt, rather than duplicating
1287 Fri Oct 11 16:03:49 1996 Jeffrey A Law (law@cygnus.com)
1289 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode
1290 field for movhu instruction.
1292 * v850-dis.c (disassemble): For V850_OPERAND_SIGNED operands,
1293 cast value to "long" not "signed long" to keep hpux10
1296 Thu Oct 10 10:25:58 1996 Jeffrey A Law (law@cygnus.com)
1298 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode field
1301 * mn10300-opc.c (FMT*): Remove definitions.
1303 * mn10300-opc.c (mn10300_opcodes): Fix destination register
1304 for shift-by-register opcodes.
1306 * mn10300-opc.c (mn10300_operands): Break DN, DM, AN, AM
1307 into [AD][MN][01] for encoding the position of the register
1310 Wed Oct 9 11:19:26 1996 Jeffrey A Law (law@cygnus.com)
1312 * mn10300-opc.c (mn10300_opcodes): Add "extended" instructions,
1313 "putx", "getx", "mulq", "mulqu", "sat16", "sat24", "bsch".
1315 Tue Oct 8 11:55:35 1996 Jeffrey A Law (law@cygnus.com)
1317 * mn10300-opc.c (mn10300_operands): Remove "REGS" operand.
1318 Fix various typos. Add "PAREN" operand.
1319 (MEM, MEM2): Define.
1320 (mn10300_opcodes): Surround all memory addresses with "PAREN"
1321 operands. Fix several typos.
1323 * mn10300-opc.c (mn10300_opcodes): Fix typos in yesterday's
1326 Mon Oct 7 16:48:45 1996 Jeffrey A Law (law@cygnus.com)
1328 * mn10300-opc.c (FMT_XX): Renumber starting at one.
1329 (mn10300_operands): Rough cut. Enough to parse "mov" instructions
1331 (mn10300_opcodes): Break opcode format out into its own field.
1332 Update many operand fields to deal with signed vs unsigned
1333 issues. Fix one or two typos in the "mov" instruction
1334 opcode, mask and/or operand fields.
1336 Mon Oct 7 11:39:49 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1338 * m68k-opc.c (plusha): Prefer encoding for m68040up, in case
1339 m68851 wasn't reset.
1341 Thu Oct 3 17:17:02 1996 Ian Lance Taylor <ian@cygnus.com>
1343 * mn10300-opc.c (mn10300_opcodes): Add opcode & masks for
1344 all opcodes. Very rough cut at operands for all opcodes.
1346 * mn10300-opc.c (mn10300_opcodes): Start fleshing out the
1349 Thu Oct 3 10:06:07 1996 Jeffrey A Law (law@cygnus.com)
1351 * mn10200-opc.c, mn10300-opc.c: New files.
1352 * mn10200-dis.c, mn10300-dis.c: New files.
1353 * mn10x00-opc.c, mn10x00-dis.c: Deleted.
1354 * disassemble.c: Break mn10x00 support into 10200 and 10300
1356 * configure.in: Likewise.
1357 * configure: Rebuilt.
1359 Thu Oct 3 15:59:12 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
1361 * Makefile.in (MOSTLYCLEAN): Move config.log to distclean.
1363 Wed Oct 2 23:28:42 1996 Jeffrey A Law (law@cygnus.com)
1365 * mn10x00-opc.c, mn10x00-dis.c: New files for Matsushita
1367 * disassemble (ARCH_mn10x00): Define.
1368 (disassembler): Handle bfd_arch_mn10x00.
1369 * configure.in: Recognize bfd_mn10x00_arch.
1370 * configure: Rebuilt.
1372 Tue Oct 1 10:49:11 1996 Ian Lance Taylor <ian@cygnus.com>
1374 * i386-dis.c (op_rtn): Change to be a pointer. Adjust uses
1375 accordingly. Don't declare functions using op_rtn.
1377 Fri Sep 27 18:28:59 1996 Stu Grossman (grossman@critters.cygnus.com)
1379 * v850-dis.c (disassemble): Add memaddr argument. Re-arrange
1380 params to be more standard.
1381 * (disassemble): Print absolute addresses and symbolic names for
1382 branch and jump targets.
1383 * v850-opc.c (v850_operand): Add displacement flag to 9 and 22
1385 * (v850_opcodes): Add breakpoint insn.
1387 Mon Sep 23 12:32:26 1996 Ian Lance Taylor <ian@cygnus.com>
1389 * m68k-opc.c: Move the fmovemx data register cases before the
1390 other cases, so that they get recognized before the data register
1391 does gets treated as a degenerate register list.
1393 Tue Sep 17 12:06:51 1996 Ian Lance Taylor <ian@cygnus.com>
1395 * mips-opc.c: Add a case for "div" and "divu" with two registers
1396 and a destination of $0.
1398 Tue Sep 10 16:12:39 1996 Fred Fish <fnf@rtl.cygnus.com>
1400 * mips-dis.c (print_insn_arg): Add prototype.
1401 (_print_insn_mips): Ditto.
1403 Mon Sep 9 14:26:26 1996 Ian Lance Taylor <ian@cygnus.com>
1405 * mips-dis.c (print_insn_arg): Print condition code registers as
1408 Tue Sep 3 12:09:46 1996 Doug Evans <dje@canuck.cygnus.com>
1410 * sparc-opc.c (sparc_opcodes): Add setuw, setsw, setx.
1412 Tue Sep 3 12:05:25 1996 Jeffrey A Law (law@cygnus.com)
1414 * v850-dis.c (disassemble): Make static. Provide prototype.
1416 Sun Sep 1 22:30:40 1996 Jeffrey A Law (law@cygnus.com)
1418 * v850-opc.c (insert_d9, insert_d22): Fix boundary case
1421 Sat Aug 31 01:27:26 1996 Jeffrey A Law (law@cygnus.com)
1423 * v850-dis.c (disassemble): Handle insertion of ',', '[' and
1424 ']' characters into the output stream.
1425 * v850-opc.c (v850_opcodes: Remove size field from all opcodes.
1426 Add "memop" field to all opcodes (for the disassembler).
1427 Reorder opcodes so that "nop" comes before "mov" and "jr"
1428 comes before "jarl".
1430 * v850-dis.c (print_insn_v850): Fix typo in last change.
1432 * v850-dis.c (print_insn_v850): Properly handle disassembling
1433 a two byte insn at the end of a memory region when the memory
1434 region's size is only two byte aligned.
1436 * v850-dis.c (v850_cc_names): Fix stupid thinkos.
1438 * v850-dis.c (v850_reg_names): Define.
1439 (v850_sreg_names, v850_cc_names): Likewise.
1440 (disassemble): Very rough cut at printing operands (unformatted).
1442 * v850-opc.c (BOP_MASK): Fix.
1443 (v850_opcodes): Fix mask for jarl and jr.
1445 * v850-dis.c: New file. Skeleton for disassembler support.
1446 * Makefile.in Remove v850 references, they're not needed here.
1447 * configure.in: Add v850-dis.o when building v850 toolchains.
1448 * configure: Rebuilt.
1449 * disassemble.c (disassembler): Call v850 disassembler.
1451 * v850-opc.c (insert_d8_7, extract_d8_7): New functions.
1452 (insert_d8_6, extract_d8_6): New functions.
1453 (v850_operands): Rename D7S to D7; operand for D7 is unsigned.
1454 Rename D8 to D8_7, use {insert,extract}_d8_7 routines.
1456 (IF4A, IF4B): Use "D7" instead of "D7S".
1457 (IF4C, IF4D): Use "D8_7" instead of "D8".
1458 (IF4E, IF4F): New. Use "D8_6".
1459 (v850_opcodes): Use IF4A/IF4B for sld.b/sst.b. Use IF4C/IF4D for
1460 sld.h/sst.h. Use IF4E/IF4F for sld.w/sst.w.
1462 * v850-opc.c (insert_d16_15, extract_d16_15): New functions.
1463 (v850_operands): Change D16 to D16_15, use special insert/extract
1464 routines. New new D16 that uses the generic insert/extract code.
1465 (IF7A, IF7B): Use D16_15.
1466 (IF7C, IF7D): New. Use D16.
1467 (v850_opcodes): Use IF7C and IF7D for ld.b and st.b.
1469 * v850-opc.c (insert_d9, insert_d22): Slightly improve error
1470 message. Issue an error if the branch offset is odd.
1472 * v850-opc.c: Add notes about needing special insert/extract
1473 for all the load/store insns, except "ld.b" and "st.b".
1475 * v850-opc.c (insert_d22, extract_d22): New functions.
1476 (v850_operands): Use insert_d22 and extract_d22 for
1478 (insert_d9): Fix range check.
1480 Fri Aug 30 18:01:02 1996 J.T. Conklin <jtc@hippo.cygnus.com>
1482 * v850-opc.c (v850_operands): Add V850_OPERAND_SIGNED flag
1483 and set bits field to D9 and D22 operands.
1485 Thu Aug 29 11:10:46 1996 Jeffrey A Law (law@cygnus.com)
1487 * v850-opc.c (v850_operands): Define SR2 operand.
1488 (v850_opcodes): "ldsr" uses R1,SR2.
1490 * v850-opc.c (v850_opcodes): Fix opcode specs for
1491 sld.w, sst.b, sst.h, sst.w, and nop.
1493 Wed Aug 28 15:55:43 1996 Jeffrey A Law (law@cygnus.com)
1495 * v850-opc.c (v850_opcodes): Add null opcode to mark the
1496 end of the opcode table.
1498 Mon Aug 26 13:35:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1500 * d10v-opc.c (pre_defined_registers): Added register pairs,
1501 "r0-r1", "r2-r3", etc.
1503 Fri Aug 23 00:27:01 1996 Jeffrey A Law (law@cygnus.com)
1505 * v850-opc.c (v850_operands): Make I16 be a signed operand.
1506 Create I16U for an unsigned 16bit mmediate operand.
1507 (v850_opcodes): Use I16U for "ori", "andi" and "xori".
1509 * v850-opc.c (v850_operands): Define EP operand.
1510 (IF4A, IF4B, IF4C, IF4D): Use EP.
1512 * v850-opc.c (v850_opcodes): Fix opcode numbers for "mov"
1513 with immediate operand, "movhi". Tweak "ldsr".
1515 * v850-opc.c (v850_opcodes): Get ld.[bhw] and st.[bhw]
1516 correct. Get sld.[bhw] and sst.[bhw] closer.
1518 * v850-opc.c (v850_operands): "not" is a two byte insn
1520 * v850-opc.c (v850_opcodes): Correct bit pattern for setf.
1522 * v850-opc.c (v850_operands): D16 inserts at offset 16!
1524 * v850-opc.c (two): Get order of words correct.
1526 * v850-opc.c (v850_operands): I16 inserts at offset 16!
1528 * v850-opc.c (v850_operands): Add "SR1" and "SR2" for system
1529 register source and destination operands.
1530 (v850_opcodes): Use SR1 and SR2 for "ldsr" and "stsr".
1532 * v850-opc.c (v850_opcodes): Fix thinko in "jmp" opcode. Fix
1533 same thinko in "trap" opcode.
1535 * v850-opc.c (v850_opcodes): Add initializer for size field
1538 * v850-opc.c (v850_operands): D6 -> DS7. References changed.
1539 Add D8 for 8-bit unsigned field in short load/store insns.
1540 (IF4A, IF4D): These both need two registers.
1541 (IF4C, IF4D): Define. Use 8-bit unsigned field.
1542 (v850_opcodes): For "sld.h", "sld.w", "sst.h", "sst.w", use
1543 IF4C & IF4D. For "trap" use I5U, not I5. Add IF1 operand
1544 for "ldsr" and "stsr".
1545 * v850-opc.c (v850_operands): 3-bit immediate for bit insns
1548 * v850-opc.c (v850_opcodes): Correct short store half (sst.h) and
1549 short store word (sst.w).
1551 Thu Aug 22 16:57:27 1996 J.T. Conklin <jtc@rtl.cygnus.com>
1553 * v850-opc.c (v850_operands): Added insert and extract fields,
1554 pointers to functions that handle unusual operand encodings.
1556 Thu Aug 22 01:05:24 1996 Jeffrey A Law (law@cygnus.com)
1558 * v850-opc.c (v850_opcodes): Enable "trap".
1560 * v850-opc.c (v850_opcodes): Fix order of displacement
1561 and register for "set1", "clr1", "not1", and "tst1".
1563 Wed Aug 21 18:46:26 1996 Jeffrey A Law (law@cygnus.com)
1565 * v850-opc.c (v850_operands): Add "B3" support.
1566 (v850_opcodes): Fix and enable "set1", "clr1", "not1"
1569 * v850-opc.c (v850_opcodes): "jmp" has only an R1 operand.
1571 * v850-opc.c: Close unterminated comment.
1573 Wed Aug 21 17:31:26 1996 J.T. Conklin <jtc@hippo.cygnus.com>
1575 * v850-opc.c (v850_operands): Add flags field.
1576 (v850_opcodes): add move opcodes.
1578 Tue Aug 20 14:41:03 1996 J.T. Conklin <jtc@hippo.cygnus.com>
1580 * Makefile.in (ALL_MACHINES): Add v850-opc.o.
1581 * configure: (bfd_v850v_arch) Add new case.
1582 * configure.in: (bfd_v850_arch) Add new case.
1583 * v850-opc.c: New file.
1585 Mon Aug 19 15:21:38 1996 Doug Evans <dje@canuck.cygnus.com>
1587 * sparc-dis.c (print_insn_sparc): Handle little endian sparcs.
1589 Thu Aug 15 13:14:43 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1591 * d10v-opc.c: Add additional information to the opcode
1592 table to help determinine which instructions can be done
1595 Thu Aug 15 13:11:13 1996 Stan Shebs <shebs@andros.cygnus.com>
1597 * mpw-make.sed: Update editing of include pathnames to be
1600 Thu Aug 15 16:28:41 1996 James G. Smith <jsmith@cygnus.co.uk>
1602 * arm-opc.h: Added "bx" instruction definition.
1604 Wed Aug 14 17:00:04 1996 Richard Henderson <rth@tamu.edu>
1606 * alpha-opc.c (EV4EXTHWINDEX): Field width should be 8 not 5.
1608 Mon Aug 12 14:30:37 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1610 * d10v-opc.c (d10v_opcodes): Minor fixes to addi and bl.l.
1612 Fri Aug 9 13:21:59 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1614 * d10v-opc.c (d10v_opcodes): Correct 'mv' unit entry to EITHER.
1616 Thu Aug 8 12:43:52 1996 Klaus Kaempf <kkaempf@progis.de>
1618 * makefile.vms: Update for alpha-opc changes.
1620 Wed Aug 7 11:55:10 1996 Ian Lance Taylor <ian@cygnus.com>
1622 * i386-dis.c (print_insn_i386): Actually return the correct value.
1623 (ONE, OP_ONE): #ifdef out; not used.
1625 Fri Aug 2 17:47:03 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1627 * d10v-opc.c (d10v_opcodes): Added 2 accumulator sub instructions.
1628 Changed subi operand type to treat 0 as 16.
1630 Wed Jul 31 16:21:41 1996 Ian Lance Taylor <ian@cygnus.com>
1632 * m68k-opc.c: Add cpushl for the mcf5200. From Ken Rose
1635 Wed Jul 31 14:39:27 1996 James G. Smith <jsmith@cygnus.co.uk>
1637 * arm-opc.h: (arm_opcodes): Added halfword and sign-extension
1638 memory transfer instructions. Add new format string entries %h and %s.
1639 * arm-dis.c: (print_insn_arm): Provide decoding of the new
1642 Fri Jul 26 11:45:04 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1644 * d10v-opc.c (d10v_operands): Added UNUM4S; a 4-bit accumulator shift.
1645 (d10v_opcodes): Modified accumulator shift instructions to use UNUM4S.
1647 Fri Jul 26 14:01:43 1996 Ian Lance Taylor <ian@cygnus.com>
1649 * alpha-dis.c (print_insn_alpha_osf): Remove.
1650 (print_insn_alpha_vms): Remove.
1651 (print_insn_alpha): Make globally visible. Chose the register
1652 names based on info->flavour.
1653 * disassemble.c: Always return print_insn_alpha for the alpha.
1655 Thu Jul 25 15:24:17 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1657 * d10v-dis.c (dis_long): Handle unknown opcodes.
1659 Thu Jul 25 12:08:09 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1661 * d10v-opc.c: Changes to support signed and unsigned numbers.
1662 All instructions with the same name that have long and short forms
1663 now end in ".l" or ".s". Divs added.
1664 * d10v-dis.c: Changes to support signed and unsigned numbers.
1666 Tue Jul 23 11:02:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1668 * d10v-dis.c: Change all functions to use info->print_address_func.
1670 Mon Jul 22 15:38:53 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1672 * m68k-opc.c (m68k_opcodes): Make opcode masks for the ColdFire
1673 move ccr/sr insns more strict so that the disassembler only
1674 selects them when the addressing mode is data register.
1676 Mon Jul 22 11:25:24 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1677 * d10v-opc.c (pre_defined_registers): Declare.
1678 * d10v-dis.c (print_operand): Now uses pre_defined_registers
1679 to pick a better name for the registers.
1681 Mon Jul 22 13:47:23 1996 Ian Lance Taylor <ian@cygnus.com>
1683 * sparc-opc.c: Fix opcode values for fpack16, and fpackfix. Fix
1684 operands for fexpand and fpmerge. From Christian Kuehnke
1685 <Christian.Kuehnke@arbi.informatik.uni-oldenburg.de>.
1687 Mon Jul 22 13:17:06 1996 Richard Henderson <rth@tamu.edu>
1689 * alpha-dis.c (print_insn_alpha): No longer the user-visible
1690 print routine. Take new regnames and cpumask arguments.
1691 Kill the environment variable nonsense.
1692 (print_insn_alpha_osf): New function. Do OSF/1 style regnames.
1693 (print_insn_alpha_vms): New function. Do VMS style regnames.
1694 * disassemble.c (disassembler): Test bfd flavour to pick
1695 between OSF and VMS routines. Default to OSF.
1697 Thu Jul 18 17:19:34 1996 Ian Lance Taylor <ian@cygnus.com>
1699 * configure.in: Call AC_SUBST (INSTALL_SHLIB).
1700 * configure: Rebuild.
1701 * Makefile.in (install): Use @INSTALL_SHLIB@.
1703 Wed Jul 17 14:39:05 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1705 * configure: (bfd_d10v_arch) Add new case.
1706 * configure.in: (bfd_d10v_arch) Add new case.
1707 * d10v-dis.c: New file.
1708 * d10v-opc.c: New file.
1709 * disassemble.c (disassembler) Add entry for d10v.
1711 Wed Jul 17 10:12:05 1996 J.T. Conklin <jtc@rtl.cygnus.com>
1713 * m68k-opc.c (m68k_opcodes): Fix bugs in coldfire insns relating
1714 to bcc, trapfl, subxl, and wddata discovered by Andreas Schwab.
1716 Mon Jul 15 16:59:55 1996 Stu Grossman (grossman@critters.cygnus.com)
1718 * i386-dis.c: Get rid of print_insn_i8086. Use info.mach to
1719 distinguish between variants of the instruction set.
1720 * sparc-dis.c: Get rid of print_insn_sparclite. Use info.mach to
1721 distinguish between variants of the instruction set.
1723 Fri Jul 12 10:12:01 1996 Stu Grossman (grossman@critters.cygnus.com)
1725 * i386-dis.c (print_insn_i8086): New routine to disassemble using
1726 the 8086 instruction set.
1727 * i386-dis.c: General cleanups. Make most things static. Add
1728 prototypes. Get rid of static variables aflags and dflags. Pass
1729 them as args (to almost everything).
1731 Thu Jul 11 11:58:44 1996 Jeffrey A Law (law@cygnus.com)
1733 * h8300-dis.c (bfd_h8_disassemble): Handle macregs in ldmac insns.
1735 * h8300-dis.c (bfd_h8_disassemble): Handle "ldm.l" and "stm.l".
1737 * h8300-dis.c (bfd_h8_disassemble): "abs" is implicitly two
1738 if the next arg is marked with SRC_IN_DST. Gross.
1740 * h8300-dis.c (bfd_h8_disassemble): Print "exr" when
1741 we're looking for and find EXR.
1743 * h8300-dis.c (bfd_h8_disassemble): We don't have a match
1744 if we're looking for KBIT and we don't find it.
1746 * h8300-dis.c (bfd_h8_disassemble): Mask off unwanted bits
1749 * h8300-dis.c (bfd_h8_disassemble): Don't set plen for
1750 3bit immediate operands.
1752 Tue Jul 9 10:55:20 1996 Ian Lance Taylor <ian@cygnus.com>
1754 * Released binutils 2.7.
1756 * alpha-opc.c: Add new case of "mov". From Klaus Kaempf
1757 <kkaempf@progis.ac-net.de>.
1759 Thu Jul 4 11:42:51 1996 Ian Lance Taylor <ian@cygnus.com>
1761 * alpha-opc.c: Correct second case of "mov" to use OPRL.
1763 Wed Jul 3 16:03:47 1996 Stu Grossman (grossman@critters.cygnus.com)
1765 * sparc-dis.c (print_insn_sparclite): New routine to print
1766 sparclite instructions.
1768 Wed Jul 3 14:21:18 1996 J.T. Conklin <jtc@rtl.cygnus.com>
1770 * m68k-opc.c (m68k_opcodes): Add coldfire support.
1772 Fri Jun 28 15:53:51 1996 Doug Evans <dje@canuck.cygnus.com>
1774 * sparc-opc.c (asi_table): Add #ASI_N, #ASI_N_L, #ASI_NUCLEUS,
1775 #ASI_NUCLEUS_LITTLE. Rename #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_L
1776 to #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_LITTLE.
1778 Tue Jun 25 22:58:31 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
1780 * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir):
1781 Use autoconf-set values.
1782 (docdir, oldincludedir): Removed.
1783 * configure.in (AC_PREREQ): autoconf 2.5 or higher.
1785 Fri Jun 21 13:53:36 1996 Richard Henderson <rth@tamu.edu>
1787 * alpha-opc.c: New file.
1788 * alpha-opc.h: Remove.
1789 * alpha-dis.c: Complete rewrite to use new opcode table.
1790 * configure.in: For bfd_alpha_arch, use alpha-opc.o.
1791 * configure: Rebuild with autoconf 2.10.
1792 * Makefile.in (ALL_MACHINES): Add alpha-opc.o.
1793 (alpha-dis.o): Depend upon $(INCDIR)/opcode/alpha.h, not
1795 (alpha-opc.o): New target.
1797 Wed Jun 19 15:55:12 1996 Ian Lance Taylor <ian@cygnus.com>
1799 * sparc-dis.c (print_insn_sparc): Remove unused local variable i.
1800 Set imm_added_to_rs1 even if the source and destination register
1803 * sparc-opc.c: Add some two operand forms of the wr instruction.
1805 Tue Jun 18 15:58:27 1996 Jeffrey A. Law <law@rtl.cygnus.com>
1807 * h8300-dis.c (bfd_h8_disassemble): Rename "hmode" argument
1810 * disassemble.c (disassembler): Handle H8/S.
1811 * h8300-dis.c (print_insn_h8300s): New function for H8/S.
1813 Tue Jun 18 18:06:50 1996 Ian Lance Taylor <ian@cygnus.com>
1815 * sparc-opc.c: Add beq/teq as aliases for be/te.
1817 * ppc-opc.c: Fix fcmpo opcode. From Sergei Steshenko
1818 <sergei@msil.sps.mot.com>.
1820 Tue Jun 18 15:08:54 1996 Klaus Kaempf <kkaempf@progis.de>
1822 * makefile.vms: New file.
1824 * alpha-dis.c (print_insn_alpha): Print lda ra,lit(rz) as mov.
1826 Mon Jun 10 18:50:38 1996 Ian Lance Taylor <ian@cygnus.com>
1828 * h8300-dis.c (bfd_h8_disassemble): Always print ABS8MEM with :8,
1831 Tue Jun 4 09:15:53 1996 Doug Evans <dje@canuck.cygnus.com>
1833 * i386-dis.c (OP_OFF): Call append_prefix.
1835 Thu May 23 15:18:23 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1837 * ppc-opc.c (instruction encoding macros): Add explicit casts to
1838 unsigned long to silence a warning from the Solaris PowerPC
1841 Thu Apr 25 19:33:32 1996 Doug Evans <dje@canuck.cygnus.com>
1843 * sparc-opc.c (sparc_opcodes): Add ultrasparc vis extensions.
1845 Mon Apr 22 17:12:35 1996 Doug Evans <dje@blues.cygnus.com>
1847 * sparc-dis.c (X_IMM,X_SIMM): New macros.
1849 (print_insn_sparc): Merge cases i,I,j together. New cases X,Y.
1850 * sparc-opc.c (sparc_opcodes): Use X for 5 bit shift constants,
1851 Y for 6 bit shift constants. Rewrite entries for crdcxt, cwrcxt,
1852 cpush, cpusha, cpull sparclet insns.
1854 Wed Apr 17 14:20:22 1996 Doug Evans <dje@canuck.cygnus.com>
1856 * sparc-dis.c (compute_arch_mask): Replace ANSI style def with K&R.
1858 Thu Apr 11 17:30:02 1996 Ian Lance Taylor <ian@cygnus.com>
1860 * sparc-opc.c: Set F_FBR on floating point branch instructions.
1861 Set F_FLOAT on other floating point instructions.
1863 Mon Apr 8 17:02:48 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1865 * ppc-opc.c (PPC860): Macro for 860/821 specific instructions and
1867 (powerpc_opcodes): Add 860/821 specific SPRs.
1869 Mon Apr 8 14:00:44 1996 Ian Lance Taylor <ian@cygnus.com>
1871 * configure.in: Permit --enable-shared to specify a list of
1872 directories. Set and substitute BFD_PICLIST.
1873 * configure: Rebuild.
1874 * Makefile.in (BFD_PICLIST): Rename from BFD_LIST. Change all
1875 uses. Set to @BFD_PICLIST@.
1877 Fri Apr 5 17:12:27 1996 Jeffrey A Law (law@cygnus.com)
1879 * h8300-dis.c (bfd_h8_disassemble): Use "bit" for L_3 immediates,
1880 not "abs", which may be needed for the absolute in something
1881 like btst #0,@10:8. Print L_3 immediates separately from other
1882 immediates. Change ABSMOV reference to ABS8MEM.
1884 Wed Apr 3 10:40:45 1996 Doug Evans <dje@canuck.cygnus.com>
1886 * sparc-dis.c (opcodes_initialized): Move inside print_insn_sparc.
1887 (current_arch_mask): New static global.
1888 (compute_arch_mask): New static function.
1889 (print_insn_sparc): Delete sparc_v9_p. New static local
1890 current_mach. Resort opcode table if current_mach changes.
1891 Generalize "insn not supported" test.
1892 (compare_opcodes): Prefer supported opcodes to nonsupported ones.
1893 Delete test for v9/!v9.
1894 * sparc-opc.c (MASK_*): Use SPARC_OPCODE_ARCH_MASK.
1896 (brfc): Split into CBR and FBR for coprocessor/fp branches.
1897 (brfcx): Renamed to FBRX.
1898 (condfc): Renamed to CONDFC. Pass v6notlet to CBR (standard
1899 coprocessor mnemonics are not supported on the sparclet).
1900 (condf): Renamed to CONDF.
1901 (SLCBCC2): Delete F_ALIAS flag.
1903 Sat Mar 30 21:45:59 1996 Doug Evans <dje@canuck.cygnus.com>
1905 * sparc-opc.c (sparc_opcodes): rd must be 0 for
1906 mov foo,{%y,%psr,%wim,%tbr}. Support mov foo,%asrX.
1908 Fri Mar 29 13:02:40 1996 Ian Lance Taylor <ian@cygnus.com>
1910 * Makefile.in (config.status): Depend upon BFD VERSION file, so
1911 that the shared library version number is set correctly.
1913 Tue Mar 26 15:47:14 1996 Ian Lance Taylor <ian@cygnus.com>
1915 * configure.in: Use AC_CHECK_TOOL to find ar and ranlib. From
1916 Miles Bader <miles@gnu.ai.mit.edu>.
1917 * configure: Rebuild.
1919 Sat Mar 16 13:04:07 1996 Fred Fish <fnf@cygnus.com>
1921 * z8kgen.c (internal, gas): Call xmalloc rather than unchecked
1924 Tue Mar 12 12:14:10 1996 Ian Lance Taylor <ian@cygnus.com>
1926 * configure: Rebuild with autoconf 2.8.
1928 Thu Mar 7 15:11:10 1996 Doug Evans <dje@charmed.cygnus.com>
1930 * sparc-dis.c (print_insn_sparc): Handle 'O' operand char like 'r'.
1931 * sparc-opc.c (sparc_opcodes): Use 'O' operand char for `neg reg'.
1933 Tue Mar 5 15:51:57 1996 Ian Lance Taylor <ian@cygnus.com>
1935 * configure.in: Don't set SHLIB or SHLINK to an empty string,
1936 since they appear as targets in Makefile.in.
1937 * configure: Rebuild.
1939 Mon Feb 26 13:03:40 1996 Stan Shebs <shebs@andros.cygnus.com>
1941 * mpw-make.sed: Edit out shared library support bits.
1943 Tue Feb 20 20:48:28 1996 Doug Evans <dje@charmed.cygnus.com>
1945 * sparc-opc.c (v8,v6notv9): Add MASK_SPARCLET.
1946 (sparc_opcode_archs): Add MASK_V8 to sparclet entry.
1947 (sparc_opcodes): Add sparclet insns.
1948 (sparclet_cpreg_table): New static local.
1949 (sparc_{encode,decode}_sparclet_cpreg): New functions.
1950 * sparc-dis.c (print_insn_sparc): Handle sparclet cpregs.
1952 Tue Feb 20 11:02:44 1996 Alan Modra <alan@mullet.Levels.UniSA.Edu.Au>
1954 * i386-dis.c (index16): New static variable.
1955 (putop): Print jecxz for 32 bit case, jcxz for 16 bit, not the
1957 (OP_indirE): Return result of OP_E.
1958 (OP_E): Check for 16 bit addressing mode, and disassemble
1959 correctly. Optimised 32 bit case a little. Don't print
1960 "(base,index,scale)" when sib specifies only an offset.
1962 Mon Feb 19 12:32:17 1996 Ian Lance Taylor <ian@cygnus.com>
1964 * configure.in: Set and substitute SHLIB_DEP.
1965 * configure: Rebuild.
1966 * Makefile.in (SHLIB_DEP): New variable.
1967 (LIBIBERTY_LISTS, BFD_LIST): New variables.
1968 (stamp-piclist): Depend upon LIBIBERTY_LISTS and BFD_LIST. If
1969 COMMON_SHLIB, add them to piclist with appropriate modifications.
1970 ($(SHLIB)): Depend upon $(SHLIB_DEP). Don't check COMMON_SHLIB
1971 here: just use piclist.
1973 Mon Feb 19 02:03:50 1996 Doug Evans <dje@charmed.cygnus.com>
1975 * sparc-dis.c (MASK_V9,V9_ONLY_P,V9_P): Define.
1976 (print_insn_sparc): Rewrite v9/not-v9 tests.
1977 (compare_opcodes): Likewise.
1978 * sparc-opc.c (MASK_<ARCH>): Define.
1979 (v6,v7,v8,sparclite,v9,v9a): Redefine.
1980 (sparclet,v6notv9): Define.
1981 (sparc_opcode_archs): Delete member `conflicts'. Add `supported'.
1982 (sparc_opcodes): Delete F_NOTV9, use v6notv9 instead.
1984 Thu Feb 15 14:45:05 1996 Ian Lance Taylor <ian@cygnus.com>
1986 * configure.in: Call AC_PROG_CC before configure.host.
1987 * configure: Rebuild.
1989 * Makefile.in (SONAME): Remove leading ../bfd/ from $(SHLIB).
1991 Wed Feb 14 19:01:27 1996 Alan Modra <alan@spri.levels.unisa.edu.au>
1993 * i386-dis.c (onebyte_has_modrm): New static array.
1994 (twobyte_has_modrm): New static array.
1995 (print_insn_i386): Only fetch the mod/reg/rm byte if it is needed.
1997 Tue Feb 13 15:15:01 1996 Ian Lance Taylor <ian@cygnus.com>
1999 * Makefile.in ($(SHLINK)): Check ts against $(SHLIB), not
2002 Mon Feb 12 16:26:06 1996 Michael Meissner <meissner@tiktok.cygnus.com>
2004 * ppc-opc.c (PPC): Undef, so default defination on Windows NT
2007 Wed Feb 7 13:59:54 1996 Ian Lance Taylor <ian@cygnus.com>
2009 * m68k-opc.c (m68k_opcodes): The bkpt instruction is supported on
2010 m68010up, not just m68020up | cpu32.
2012 * Makefile.in (SONAME): New variable.
2013 ($(SHLINK)): Make a link to the transformed name, as well.
2014 (stamp-tshlink): New target.
2015 (install): Skip stamp-tshlink during install.
2017 Tue Feb 6 12:28:54 1996 Ian Lance Taylor <ian@cygnus.com>
2019 * configure.in: Call AC_ARG_PROGRAM.
2020 * configure: Rebuild.
2021 * Makefile.in (program_transform_name): New variable.
2022 (install): Transform library name before installing it.
2024 Mon Feb 5 16:14:42 1996 Ian Lance Taylor <ian@cygnus.com>
2026 * i960-dis.c (mem): Add HX dcinva instruction.
2028 Support for building as a shared library, based on patches from
2029 Alan Modra <alan@spri.levels.unisa.edu.au>:
2030 * configure.in: Add AC_ARG_ENABLE for shared and commonbfdlib.
2031 New substitutions: ALLLIBS, PICFLAG, SHLIB, SHLIB_CC,
2032 SHLIB_CFLAGS, COMMON_SHLIB, SHLINK.
2033 * configure: Rebuild.
2034 * Makefile.in (ALLLIBS): New variable.
2035 (PICFLAG, SHLIB, SHLIB_CC, SHLIB_CFLAGS): New variables.
2036 (COMMON_SHLIB, SHLINK): New variables.
2037 (.c.o): If PICFLAG is set, compile twice, once PIC, once normal.
2038 (STAGESTUFF): Remove variable.
2039 (all): Depend upon $(ALLLIBS) rather than $(TARGETLIB).
2040 (stamp-piclist, piclist): New targets.
2041 ($(SHLIB), $(SHLINK)): New targets.
2042 ($(OFILES)): Depend upon stamp-picdir.
2043 (disassemble.o): Build twice if PICFLAG is set.
2044 (MOSTLYCLEAN): Add pic/*.o.
2045 (clean): Remove $(SHLIB), $(SHLINK), piclist, and stamp-piclist.
2046 (distclean): Remove pic and stamp-picdir.
2047 (install): Install shared libraries.
2048 (stamp-picdir): New target.
2050 Fri Feb 2 17:15:25 1996 Doug Evans <dje@charmed.cygnus.com>
2052 * sparc-dis.c (print_insn_sparc): Delete DISASM_RAW_INSN support.
2053 Print unknown instruction as "unknown", rather than in hex.
2055 Tue Jan 30 14:06:08 1996 Ian Lance Taylor <ian@cygnus.com>
2057 * dis-buf.c: Include "sysdep.h" before "dis-asm.h".
2059 Thu Jan 25 20:24:07 1996 Doug Evans <dje@charmed.cygnus.com>
2061 * sparc-opc.c (sparc_opcode_archs): Mark v8/sparclite as conflicting.
2063 Thu Jan 25 11:56:49 1996 Ian Lance Taylor <ian@cygnus.com>
2065 * i386-dis.c (print_insn_i386): Only fetch the mod/reg/rm byte
2066 when necessary. From Ulrich Drepper
2067 <drepper@myware.rz.uni-karlsruhe.de>.
2069 Thu Jan 25 03:39:10 1996 Doug Evans <dje@charmed.cygnus.com>
2071 * sparc-dis.c (print_insn_sparc): NUMOPCODES replaced with
2072 sparc_num_opcodes. Update architecture enum values.
2073 * sparc-opc.c (sparc_opcode_archs): Replaces architecture_pname.
2074 (sparc_opcode_lookup_arch): New function.
2075 (sparc_num_opcodes): Renamed from bfd_sparc_num_opcodes.
2076 (sparc_opcodes): Add v9a shutdown insn.
2078 Mon Jan 22 08:29:59 1996 Doug Evans <dje@charmed.cygnus.com>
2080 * sparc-dis.c (print_insn_sparc): Renamed from print_insn.
2081 If DISASM_RAW_INSN, print insn in hex. Handle v9a as opcode
2083 (print_insn_sparc64): Deleted.
2084 * disassemble.c (disassembler, case bfd_arch_sparc): Always use
2087 * sparc-opc.c (architecture_pname): Add v9a.
2089 Fri Jan 12 14:35:58 1996 David Mosberger-Tang <davidm@AZStarNet.com>
2091 * alpha-opc.h (alpha_insn_set): VAX floating point opcode was
2092 incorrectly defined as 0x16 when it should be 0x15.
2093 (FLOAT_FORMAT_MASK): function code is 11 bits, not just 7 bits!
2094 (alpha_insn_set): added cvtst and cvttq float ops. Also added
2095 excb (exception barrier) which is defined in the Alpha
2096 Architecture Handbook version 2.
2097 * alpha-dis.c (print_insn_alpha): Fixed special-case decoding for
2098 OPERATE_FORMAT_CODE type instructions. The bug caused mulq to be
2099 disassembled as or, for example.
2101 Wed Jan 10 12:37:22 1996 Ian Lance Taylor <ian@cygnus.com>
2103 * mips-dis.c (print_insn_arg): Print cases 'i' and 'u' in hex.
2104 (_print_insn_mips): Change i from int to unsigned int.
2106 Thu Jan 4 17:21:10 1996 David Edelsohn <edelsohn@mhpcc.edu>
2108 * ppc-opc.c (powerpc_opcodes): tlbi POWER opcode form different
2109 from tlbie PowerPC opcode. Add PPC603 tlbld and tlbli.
2111 Thu Dec 28 13:29:19 1995 John Hassey <hassey@rtp.dg.com>
2113 * i386-dis.c: Added Pentium Pro instructions.
2115 Tue Dec 19 22:56:35 1995 Michael Meissner <meissner@tiktok.cygnus.com>
2117 * ppc-opc.c (fsqrt{,.}): Duplicate for PowerPC in addition to
2120 Fri Dec 15 14:14:15 1995 J.T. Conklin <jtc@rtl.cygnus.com>
2122 * sh-opc.h (sh_nibble_type): Added REG_B.
2123 (sh_arg_type): Added A_REG_B.
2124 (sh_table): Added pref and bank reg versions of ldc, ldc.l, stc
2126 * sh-dis.c (print_insn_shx): Added cases for REG_B and A_REG_B.
2128 Fri Dec 15 16:44:31 1995 Ian Lance Taylor <ian@cygnus.com>
2130 * disassemble.c (disassembler): Use new bfd_big_endian macro.
2132 Tue Dec 12 12:22:24 1995 Ian Lance Taylor <ian@cygnus.com>
2134 * Makefile.in (distclean): Remove stamp-h. From Ronald
2135 F. Guilmette <rfg@monkeys.com>.
2137 Tue Dec 5 13:42:44 1995 Stan Shebs <shebs@andros.cygnus.com>
2139 From David Mosberger-Tang <davidm@azstarnet.com>:
2140 * alpha-dis.c (print_insn_alpha): fixed decoding of cpys
2143 Mon Dec 4 12:29:05 1995 J.T. Conklin <jtc@rtl.cygnus.com>
2145 * sh-opc.h (sh_arg_type): Added A_SSR and A_SPC.
2146 (sh_table): Added many SH3 opcodes.
2147 * sh-dis.c (print_insn_shx): Added cases for A_SSR and A_SPC.
2149 Fri Dec 1 07:42:18 1995 Michael Meissner <meissner@tiktok.cygnus.com>
2151 * ppc-opc.c (subfc., subfco): Mark this PPCCOM, not PPC.
2152 (subco,subco.): Mark this PPC, not PPCCOM.
2154 Mon Nov 27 13:09:52 1995 Ian Lance Taylor <ian@cygnus.com>
2156 * configure: Rebuild with autoconf 2.7.
2158 Tue Nov 21 18:28:06 1995 Ian Lance Taylor <ian@cygnus.com>
2160 * configure: Rebuild with autoconf 2.6.
2162 Wed Nov 15 19:02:53 1995 Ken Raeburn <raeburn@cygnus.com>
2164 * configure.in: Sort list of architectures. Accept but do nothing
2165 for alliant, convex, pyramid, romp, and tahoe.
2167 Wed Nov 8 20:18:59 1995 Ian Lance Taylor <ian@cygnus.com>
2169 * a29k-dis.c (print_special): Change num to unsigned int.
2171 Wed Nov 8 20:10:35 1995 Eric Freudenthal <freudenthal@nyu.edu>
2173 * a29k-dis.c (print_insn): Cast insn24 to unsigned long when
2176 Tue Nov 7 15:21:06 1995 Ian Lance Taylor <ian@cygnus.com>
2178 * configure.in: Call AC_CHECK_PROG to find and cache AR.
2179 * configure: Rebuilt.
2181 Mon Nov 6 17:39:47 1995 Harry Dolan <dolan@ssd.intel.com>
2183 * configure.in: Add case for bfd_i860_arch.
2184 * configure: Rebuild.
2186 Fri Nov 3 12:45:31 1995 Ian Lance Taylor <ian@cygnus.com>
2188 * m68k-opc.c (m68k_opcodes): Correct fmoveml operands.
2189 * m68k-dis.c (NEXTSINGLE): Change i to unsigned int.
2190 (NEXTDOUBLE): Likewise.
2191 (print_insn_m68k): Don't match fmoveml if there is more than one
2192 register in the list.
2193 (print_insn_arg): Handle a place of '8' for a type of 'L'.
2195 Thu Nov 2 23:06:33 1995 Ian Lance Taylor <ian@cygnus.com>
2197 * m68k-opc.c: Use #W rather than #w.
2198 * m68k-dis.c (print_insn_arg): Handle new 'W' place.
2200 Wed Nov 1 13:30:24 1995 Ian Lance Taylor <ian@cygnus.com>
2202 * m68k-opc.c (m68k_opcode_aliases): Add dbfw as an alias for dbf,
2203 and likewise for all the dbxx opcodes.
2205 Mon Oct 30 20:50:40 1995 Fred Fish <fnf@cygnus.com>
2207 * arc-dis.c: Include elf-bfd.h rather than libelf.h.
2209 Mon Oct 23 11:11:34 1995 James G. Smith <jsmith@pasanda.cygnus.co.uk>
2211 * mips-opc.c: Added shorthand (V1) for INSN_4100 manifest. Added
2212 the VR4100 specific instructions to the mips_opcodes structure.
2214 Thu Oct 19 11:05:23 1995 Stan Shebs <shebs@andros.cygnus.com>
2216 * mpw-config.in, mpw-make.sed: Remove ugly workaround for
2217 ugly Metrowerks bug in CW6, is fixed in CW7.
2219 Mon Oct 16 12:59:01 1995 Michael Meissner <meissner@tiktok.cygnus.com>
2221 * ppc-opc.c (whole file): Add flags for common/any support.
2223 Tue Oct 10 11:06:07 1995 Fred Fish <fnf@cygnus.com>
2225 * Makefile.in (BISON): Remove macro.
2226 (FLAGS_TO_PASS): Remove BISON.
2228 Fri Oct 6 16:26:45 1995 Ken Raeburn <raeburn@cygnus.com>
2230 Mon Sep 25 22:49:32 1995 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2232 * m68k-dis.c (print_insn_m68k): Recognize all two-word
2233 instructions that take no args by looking at the match mask.
2234 (print_insn_arg): Always print "%" before register names.
2235 [case 'c']: Use "nc" for the no-cache case, as recognized by gas.
2236 [case '_']: Don't print "@#" before address.
2237 [case 'J']: Use "%s" as format string, not register name.
2238 [case 'B']: Treat place == 'C' like 'l' and 'L'.
2240 Thu Oct 5 22:16:20 1995 Ken Raeburn <raeburn@cygnus.com>
2242 * i386-dis.c: Describe cmpxchg8b operand, and spell the opcode
2245 Tue Oct 3 08:30:20 1995 steve chamberlain <sac@slash.cygnus.com>
2247 From David Mosberger-Tang <davidm@azstarnet.com>
2249 * alpha-opc.h (MEMORY_FUNCTION_FORMAT_MASK): added.
2250 (alpha_insn_set): added definitions for VAX floating point
2251 instructions (Unix compilers don't generate these, but handcoded
2252 assembly might still use them).
2254 * alpha-dis.c (print_insn_alpha): added support for disassembling
2255 the miscellaneous instructions in the Alpha instruction set.
2257 Tue Sep 26 18:47:20 1995 Stan Shebs <shebs@andros.cygnus.com>
2259 * mpw-config.in: Add m68k-opc.c.o to BFD_MACHINES for m68k,
2260 no longer create sysdep.h, sed ppc-opc.c to work around a
2261 serious Metrowerks C bug.
2262 * mpw-make.in: Remove.
2263 * mpw-make.sed: New file, used by mpw-configure to edit
2264 Makefile.in into an MPW makefile.
2266 Wed Sep 20 12:55:28 1995 Ian Lance Taylor <ian@cygnus.com>
2268 * Makefile.in (maintainer-clean): New synonym for realclean.
2270 Tue Sep 19 15:28:36 1995 Ian Lance Taylor <ian@cygnus.com>
2272 * m68k-opc.c: Split pmove patterns which use 'P' into patterns
2273 which use '0', '1', and '2' instead. Specify the proper size for
2274 a pmove immediate operand. Correct the pmovefd patterns to be
2275 moves to a register, not from a register.
2276 * m68k-dis.c (print_insn_arg): Replace 'P' with '0', '1', '2'.
2278 Thu Sep 14 11:58:22 1995 Doug Evans <dje@canuck.cygnus.com>
2280 * sparc-opc.c (sparc_opcodes): Mark all insns that reference
2281 %psr, %wim, %tbr as F_NOTV9.
2283 Fri Sep 8 01:07:38 1995 Ian Lance Taylor <ian@cygnus.com>
2285 * Makefile.in (Makefile): Just rebuild Makefile when running
2287 (config.h, stamp-h): New targets.
2288 * configure.in: Call AC_CONFIG_HEADER and AC_CANONICAL_SYSTEM
2289 earlier. Don't bother to call AC_ARG_PROGRAM. Touch stamp-h when
2290 rebuilding config.h.
2291 * configure: Rebuild.
2293 * mips-opc.c: Change unaligned loads and stores with "t,A"
2294 operands to use "t,A(b)".
2296 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2298 * sh-dis.c (print_insn_shx): Add F_FR0 support.
2300 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2302 * sh-dis.c (print_insn_shx): Change loop over op->arg[n] to iterate
2303 until 3 instead of until 2.
2305 Wed Sep 6 21:21:33 1995 Ian Lance Taylor <ian@cygnus.com>
2307 * Makefile.in (ALL_CFLAGS): Define.
2308 (.c.o, disassemble.o): Use $(ALL_CFLAGS).
2309 (MOSTLYCLEAN): Add config.log.
2310 (distclean): Don't remove config.log.
2311 * configure.in: Substitute HDEFINES.
2312 * configure: Rebuild.
2314 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2316 * sh-opc.h (sh_arg_type): Add F_FR0.
2317 (sh_table, case fmac): Add F_FR0 as first argument.
2319 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2321 * sh-opc.h (sh_opcode_info): Increase arg array size to 4.
2323 Tue Sep 5 18:28:10 1995 Doug Evans <dje@canuck.cygnus.com>
2325 * sparc-dis.c: Remove all references to NO_V9.
2327 Tue Sep 5 20:03:26 1995 Ian Lance Taylor <ian@cygnus.com>
2329 * aclocal.m4: Just include ../bfd/aclocal.m4.
2330 * configure: Rebuild.
2332 Tue Sep 5 16:09:59 1995 Doug Evans <dje@canuck.cygnus.com>
2334 * sparc-dis.c (X_DISP19): Define.
2335 (print_insn, case 'G'): Use it.
2336 (print_insn, case 'L'): Sign extend displacement.
2338 Mon Sep 4 14:28:46 1995 Ian Lance Taylor <ian@cygnus.com>
2340 * configure.in: Run ../bfd/configure.host before AC_PROG_CC.
2341 Subsitute CFLAGS and AR. Call AC_PROG_INSTALL. Don't substitute
2342 host_makefile_frag or frags.
2343 * aclocal.m4: New file.
2344 * configure: Rebuild.
2345 * Makefile.in (INSTALL): Set to @INSTALL@.
2346 (INSTALL_PROGRAM): Set to @INSTALL_PROGRAM@.
2347 (INSTALL_DATA): Set to @INSTALL_DATA@.
2349 (AR_FLAGS): Set to rc rather than qc.
2350 (CC): Define as @CC@.
2351 (CFLAGS): Set to @CFLAGS@.
2352 (@host_makefile_frag@): Remove.
2353 (config.status): Remove dependency upon @frags@.
2355 * configure.in: ../bfd/config.bfd now just sets shell variables.
2356 Use them rather than looking through target Makefile fragments.
2357 * configure: Rebuild.
2359 Thu Aug 31 12:35:32 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2361 * sh-opc.h (ftrc): Change FPUL_N to FPUL_M.
2363 Wed Aug 30 13:52:28 1995 Doug Evans <dje@canuck.cygnus.com>
2365 * sparc-opc.c (sparc_opcodes): Delete duplicate wr %y insn.
2366 Add clrx, iprefetch, signx, clruw, cas, casl, casx, casxl synthetic
2369 * sparc-opc.c (sparc_opcodes): Fix prefetcha insn.
2370 (lookup_{name,value}): New functions.
2371 (prefetch_table): New static local.
2372 (sparc_{encode,decode}_prefetch): New functions.
2373 * sparc-dis.c (print_insn): Handle '*' arg (prefetch function).
2375 Wed Aug 30 11:11:58 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2377 * sh-opc.h: Add blank lines to improve readabililty of sh3e
2380 Wed Aug 30 11:09:38 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2382 * sh-dis.c: Correct comment on first line of file.
2384 Tue Aug 29 15:37:18 1995 Doug Evans <dje@canuck.cygnus.com>
2386 * disassemble.c (disassembler): Handle bfd_mach_sparc64.
2388 * sparc-opc.c (asi, membar): New static locals.
2389 (sparc_{encode,decode}_{asi,membar}): New functions.
2390 (sparc_opcodes, membar insn): Fix.
2391 * sparc-dis.c (print_insn): Call sparc_decode_asi.
2392 Support decoding of membar masks.
2395 Sat Aug 26 21:22:48 1995 Ian Lance Taylor <ian@cygnus.com>
2397 * m68k-opc.c (m68k_opcode_aliases): Add br, brs, brb, brw, brl.
2399 Mon Aug 21 17:33:36 1995 Ian Lance Taylor <ian@cygnus.com>
2401 * m68k-opc.c (m68k_opcode_aliases): Add bhib as an alias for bhis,
2402 and likewise for the other branches. Add bhs as an alias for bcc,
2403 and likewise for the size variants. Add dbhs as an alias for
2406 Fri Aug 11 13:40:24 1995 Jeff Law (law@snake.cs.utah.edu)
2408 * sh-opc.h (FP sts instructions): Update to match reality.
2410 Mon Aug 7 16:12:58 1995 Ian Lance Taylor <ian@cygnus.com>
2412 * m68k-dis.c: (fpcr_names): Add % before all register names.
2413 (reg_names): Likewise.
2414 (print_insn_arg): Don't explicitly print % before register names.
2415 Add % before register names in static array names. In case 'r',
2416 print data registers as `@(Dn)', not `Dn@'. When printing a
2417 memory address, don't print @# before it.
2418 (print_indexed): Change base_disp and outer_disp from int to
2419 bfd_vma. Print using MIT syntax, not mutant invalid Motorola
2420 syntax. Sign extend 8 byte displacement correctly.
2421 (print_base): Print using MIT syntax. Print zpc when appropriate.
2422 Change parameter disp from int to bfd_vma.
2424 * m68k-opc.c (m68k_opcode_aliases): Add jsrl and jsrs as aliases
2427 Mon Aug 7 02:21:40 1995 Jeff Law (law@snake.cs.utah.edu)
2429 * sh-dis.c (print_insn_shx): Handle new operand types F_REG_N,
2430 F_REG_M, FPSCR_M, FPSCR_N, FPUL_M and FPUL_N.
2431 * sh-opc.h (sh_arg_type): Add new operand types.
2432 (sh_table): Add new opcodes from SH3E Floating Point ISA.
2434 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
2436 * Makefile.in (distclean): Remove generated file config.h.
2438 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
2440 * Makefile.in (distclean): Remove generated file config.h.
2442 Wed Aug 2 18:33:40 1995 Ian Lance Taylor <ian@cygnus.com>
2444 * m68k-opc.c: New file, holding tables from include/opcode/m68k.h.
2446 * m68k-dis.c: Remove BREAK_UP_BIG_DECL stuff.
2448 (print_insn_m68k): Change d to be const. Use m68k_numopcodes
2449 rather than numopcodes. Use m68k_opcodes rather than removed
2450 opcode function. Don't check F_ALIAS.
2451 (print_insn_arg): Change first parameter to be const char *.
2452 * Makefile.in (ALL_MACHINES): Add m68k-opc.o.
2453 (m68k-opc.o): New target.
2454 * configure.in: Build m68k-opc.o for bfd_m68k_arch.
2455 * configure: Rebuild.
2457 Wed Aug 2 08:23:38 1995 Doug Evans <dje@canuck.cygnus.com>
2459 * sparc-dis.c (HASH_SIZE, HASH_INSN): Define.
2460 (opcode_bits, opcode_hash_table): New variables.
2461 (opcodes_initialized): Renamed from opcodes_sorted.
2462 (build_hash_table): New function.
2463 (is_delayed_branch): Use hash table.
2464 (print_insn): Renamed from print_insn_sparc, made static.
2465 Build and use hash table. If !sparc64, ignore sparc64 insns,
2466 and vice-versa if sparc64.
2467 (print_insn_sparc, print_insn_sparc64): New functions.
2468 (compare_opcodes): Move sparc64 opcodes to end.
2469 Print commutative insns with constant second.
2470 * sparc-opc.c (all non-v9 insns): Use flag F_NOTV9 instead of F_ALIAS.
2472 Tue Aug 1 00:12:49 1995 Ian Lance Taylor <ian@cygnus.com>
2474 * sh-dis.c (print_insn_shx): Remove unused local dslot. Use
2475 print_address_func for A_BDISP12 and A_BDISP8. Correct test which
2476 avoids printing a delay slot in a delay slot.
2477 * sh-opc.h (sh_table): Fully bracket last entry.
2479 Mon Jul 31 12:04:47 1995 Doug Evans <dje@canuck.cygnus.com>
2481 * sparc-opc.c (sllx, srax, srlx): Fix disassembly.
2483 Wed Jul 12 00:59:34 1995 Ken Raeburn <raeburn@kr-pc.cygnus.com>
2485 * configure.in: Get host_makefile_frag from ${srcdir}.
2487 * configure.in: Autoconfiscated. Check for string[s].h. Create
2488 config.h from config.in. Don't set up sysdep.h link.
2489 * sysdep.h: New file.
2490 * configure, config.in: New files, generated from configure.in.
2491 * Makefile.in: Updated to be processed autoconf-style.
2492 (distclean): Keep sysdep.h. Remove config.log and config.cache.
2493 (Makefile): Depend on config.status.
2494 (config.status): New rule.
2495 * configure.bat: Update Makefile substitutions.
2497 Tue Jul 11 14:23:37 1995 Jeff Spiegel <jeffs@lsil.com>
2499 * mips-opc.c (L1): Define.
2500 (mips_opcodes): Add R4010 instructions: flushi, flushd, flushid,
2501 addciu, madd, maddu, ffc, ffs, msub, msubu, selsi, selsr, waiti,
2504 Tue Jul 11 11:49:49 1995 Ian Lance Taylor <ian@cygnus.com>
2506 * mips-opc.c (mips_opcodes): For the move pseudo-op, prefer daddu
2507 if ISA 3 and addu otherwise, replacing or, since some MIPS chips
2508 have multiple add units but only a single logical unit.
2510 * ppc-opc.c (powerpc_operands): Change CR to use a bitsize of 3,
2511 shifted by 18, without any insertion or extraction function.
2512 (insert_cr, extract_cr): Remove.
2514 Wed Jun 21 20:05:39 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
2516 * m68k-dis.c (print_insn_arg, print_indexed): Print "%" before
2519 Thu Jun 15 17:23:31 1995 Stan Shebs <shebs@andros.cygnus.com>
2521 * mpw-config.in: Add sh and i386 configs, remove sparc config.
2522 * sh-opc.h: Add copyright.
2524 Mon Jun 5 03:30:43 1995 Ken Raeburn <raeburn@kr-laptop.cygnus.com>
2526 * Makefile.in (crunch-m68k): Delete extra target accidentally
2527 checked in a while ago.
2529 Wed May 24 16:22:13 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2531 * sh-opc.h (sh_table): Add SH3 support.
2533 Wed May 24 14:16:08 1995 Steve Chamberlain <sac@slash.cygnus.com>
2535 * sh-opc.h: Added bsrf and braf.
2537 Wed May 10 14:28:16 1995 Richard Earnshaw (rearnsha@armltd.co.uk)
2539 * arm-opc.h (arm_opcodes): Add 64-bit multiply patterns. Delete
2540 bogus [ls]fm{ea,fd} patterns.
2542 * arm-opc.h (arm_opcodes): Correct typos in stm, ldm, std, and ldc.
2543 * arm-dis.c (print_insn_arm): Make GIVEN a parameter, don't try and
2544 initialize it from memory. Make function static.
2545 (print_insn_{big,little}_arm): New functions.
2546 * disassemble.c (disassembler, case bfd_arch_arm): Disassemble for
2547 the correct endianness.
2549 Mon Apr 24 14:18:05 1995 Jason Molenda (crash@phydeaux.cygnus.com>
2551 * sh-opc.h (sh_nibble_type, sh_arg_type): remove trailing , from
2554 Wed Apr 19 14:07:03 1995 Michael Meissner <meissner@tiktok.cygnus.com>
2556 * m68k-dis.c (opcode): Finish change made by Kung Hsu on April
2557 17th, so that it builds again using GCC as the compiler.
2559 Tue Apr 18 12:14:51 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
2561 * mips-dis.c (print_insn_little_mips): Cast return value from
2562 bfd_getl32 from bfd_vma to unsigned long, because _print_insn_mips
2563 expects an unsigned long, and that might be fewer words of
2564 argument storage (e.g., if bfd_vma is long long on a 32-bit
2566 (print_insn_big_mips): Likewise with bfd_getb32 value.
2567 (_print_insn_mips): Now static.
2569 Mon Apr 17 12:23:28 1995 Kung Hsu <kung@rtl.cygnus.com>
2571 * m68k-dis.c: Take out #define BREAK_UP_BIG_DECL kludge, because
2572 gcc memory hog problem with initializer is fixed.
2574 Mon Apr 10 15:55:01 1995 Stan Shebs <shebs@andros.cygnus.com>
2576 Merge in support for Mac MPW as a host.
2577 (Old change descriptions retained for informational value.)
2579 * mpw-config.in (archname): Compute from the config.
2580 (BFD_MACHINES, ARCHDEFS): Put into mk.tmp.
2582 * mpw-config.in (target_arch): Compute from canonical target.
2583 (m68k, mips, powerpc, sparc): Add architectures.
2584 * mpw-make.in (disassemble.c.o): Add.
2585 (ALL_CFLAGS): Remove special flags (-mc68020 -mc68881 -model far).
2587 * mpw-config.in (BFD_MACHINES): Set to a default value.
2588 * mpw-make.in (BFD_MACHINES): Remove wired-in value.
2590 * mpw-make.in (CSEARCH): Add extra-include to search path.
2592 * mpw-config.in (varargs.h): Don't create.
2593 (sysdep.h): Create using forward-include.
2594 * mpw-make.in (CSEARCH): Add include/mpw to search path.
2596 * mpw-config.in: New file, MPW version of configure.in.
2597 * mpw-make.in: New file, MPW version of Makefile.in.
2599 Fri Mar 31 14:23:38 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
2601 * alpha-dis.c (print_insn_alpha): Put empty statement after
2604 Tue Mar 21 10:51:40 1995 Jeff Law (law@snake.cs.utah.edu)
2606 * hppa-dis.c (sign_extend): Delete, redundant with libhppa.h version.
2607 (low_sign_extend): Likewise.
2608 (get_field): Delete unused function.
2609 (set_field, deposit_14, deposit_21): Likewise.
2611 Fri Mar 17 15:55:53 1995 J.T. Conklin <jtc@rtl.cygnus.com>
2613 * i386-dis.c: Support for more pentium opcodes. From Guy Harris
2616 Tue Mar 14 00:52:57 1995 Ken Raeburn (raeburn@kr-pc.cygnus.com)
2618 Sat Feb 11 17:22:41 1995 Klaus Kaempf (kkaempf@didymus.rmi.de)
2620 * alpha-opc.h (OSF_ASMCODE): define
2621 print pal-code names as defined in App C of the
2622 Alpha Architecture Reference Manual
2624 * alpha-dis.c: cleaned up output
2625 print stylized code forms as defined in App A.4.3 of the
2626 Alpha Architecture Reference Manual
2628 Wed Mar 8 15:21:14 1995 Ian Lance Taylor <ian@cygnus.com>
2630 * mips-opc.c: Add new mips4 instructions. Don't set INSN_RFE for
2632 * mips-dis.c (print_insn_arg): Handle new argument types 'h', 'R',
2635 Wed Mar 8 02:54:05 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
2637 * m68k-dis.c (opcode): New function. Returns address of opcode
2638 table entry given index, even if the opcode table was split to
2639 work around gcc bugs.
2640 (print_insn_m68k): Call opcode instead of referencing m68k_opcodes
2642 (BREAK_UP_BIG_DECL): Make secondary array static and const.
2643 (reg_names): Now const.
2644 (print_insn_arg): Arrays cacheFieldName and names now const.
2645 (print_indexed): Array scales now const.
2647 Tue Mar 7 16:41:21 1995 Ian Lance Taylor <ian@cygnus.com>
2649 * ppc-opc.c: Sort recently added instructions by minor opcode
2650 number within major opcode number.
2652 Mon Mar 6 10:04:36 1995 Jeff Law (law@snake.cs.utah.edu)
2654 * hppa-dis.c: Include libhppa.h.
2656 Fri Feb 24 19:15:36 1995 Ian Lance Taylor <ian@cygnus.com>
2658 * mips-opc.c: Change dli to use M_DLI, and add dla.
2660 Mon Feb 20 23:54:38 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2662 * Makefile.in (ALL_MACHINES): Add w65-dis.o.
2664 Thu Feb 16 17:34:41 1995 Ian Lance Taylor <ian@cygnus.com>
2666 * mips-opc.c: Add r4650 mul instruction.
2668 Wed Feb 15 15:45:20 1995 Ian Lance Taylor <ian@cygnus.com>
2670 * mips-opc.c: Add uld and usd macros for unaligned double load and
2673 Tue Feb 14 13:17:37 1995 Michael Meissner <meissner@tiktok.cygnus.com>
2675 * ppc-opc.c (powerpc_opcodes): Add 403GA opcodes rfci, dccci,
2676 mfdcr, mtdcr, icbt, iccci.
2678 Thu Feb 9 12:28:13 1995 Stan Shebs <shebs@andros.cygnus.com>
2680 * i960-dis.c (struct tabent, struct sparse_tabent): Change the
2681 signed char fields to shorts, more portable.
2683 Wed Feb 8 17:29:29 1995 Stan Shebs <shebs@andros.cygnus.com>
2685 * i960-dis.c (struct tabent, struct sparse_tabent): Declare the
2686 char fields as signed chars, since they may have negative values.
2688 Mon Feb 6 10:52:06 1995 J.T. Conklin <jtc@rtl.cygnus.com>
2690 * i386-dis.c (dis386_twobyte): Add cpuid, From Charles Hannum
2691 (mycroft@netbsd.org).
2693 Mon Jan 30 12:38:00 1995 Ian Lance Taylor <ian@cygnus.com>
2695 From "Logg, Ed" <elogg@ea.com>:
2696 * ppc-opc.c (extract_bdm): Correct parenthezisation.
2697 * ppc-dis.c (print_insn_powerpc): Print .long before unrecognized
2700 Thu Jan 26 18:32:08 1995 Ian Lance Taylor <ian@cygnus.com>
2702 * ppc-opc.c: Changes based on patch from David Edelsohn
2703 <edelsohn@mhpcc.edu>.
2704 (powerpc_operands): Add operands SPRBAT and SPRG. Split TBR out of
2707 (insert_tbr): New static function.
2708 (extract_tbr): New static function.
2709 (XFXFXM_MASK, XFXM): Define.
2710 (XSPRBAT_MASK, XSPRG_MASK): Define.
2711 (powerpc_opcodes): Add instructions to access special registers by
2712 name. Add mtcr and mftbu.
2714 Tue Jan 17 10:56:43 1995 Ian Lance Taylor <ian@sanguine.cygnus.com>
2716 * mips-opc.c (P3): Define.
2717 (mips_opcodes): Add mad and madu.
2719 Sun Jan 15 16:32:59 1995 Steve Chamberlain <sac@splat>
2721 * configure.in: Add W65 support.
2722 * disassemble.c: Likewise.
2723 * w65-opc.h, w65-dis.c: New files.
2725 Wed Dec 28 22:15:33 1994 Steve Chamberlain (sac@jonny.cygnus.com)
2727 * h8300-dis.c (bfd_h8_disassemble): Add support for 2 bit
2730 Tue Dec 20 11:25:12 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2732 * mips-opc.c: Add dli as a synonym for li.
2734 Thu Dec 8 18:23:31 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
2736 * alpha-dis.c (print_insn_alpha): Handle call_pal instruction, and
2737 print something for reserved opcode values, even if it won't
2740 * mips-dis.c (_print_insn_mips): When initializing, shift right
2741 and mask, to avoid sign extension problems on the Alpha.
2743 * m68k-dis.c (print_insn_arg, case 'J'): Handle buscr and pcr
2746 Wed Nov 23 22:34:51 1994 Steve Chamberlain (sac@jonny.cygnus.com)
2748 * sh-opc.h (mov.l gbr): Get direction right.
2749 * sh-dis.c (print_insn_shx): New function.
2750 (print_insn_shl, print_insn_sh): Call print_insn_shx to
2751 print opcodes with right byte order.
2753 Thu Nov 3 19:32:22 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
2755 * ns32k-dis.c (struct ns32k_option): Renamed from struct option,
2756 to avoid conflicts with getopt.
2758 Mon Oct 31 18:48:10 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2760 * hppa-dis.c (print_insn_hppa): Read the instruction using
2761 bfd_getb32, so that it works on a little endian or 64 bit host.
2762 Remove unused local variable op.
2764 Tue Oct 25 17:07:57 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2766 * mips-opc.c: Use or instead of addu for pseudo-op move, since
2767 addu does not work correctly if -mips3.
2769 Wed Oct 19 13:40:16 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2771 * a29k-dis.c (print_special): Add special register names defined
2772 on 29030, 29040 and 29050.
2773 (print_insn): Handle new operand type 'I'.
2775 Wed Oct 12 11:59:55 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2777 * Makefile.in (INSTALL): Use top level install.sh script.
2779 Wed Oct 5 19:16:29 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2781 * sparc-dis.c: Rewrite to use bitfields, rather than a union, so
2782 that it works on a little endian host.
2784 Tue Oct 4 12:14:21 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2786 * configure.in: Use ${config_shell} when running config.bfd.
2788 Wed Sep 21 18:49:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
2790 * mips-opc.c (mips_opcodes): "dabs" is only available with -mips3.
2792 Thu Sep 15 16:30:22 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
2794 * a29k-dis.c (print_insn): Print the opcode.
2796 Wed Sep 14 17:52:14 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
2798 * mips-opc.c (mips_opcodes): Set WR_t for sc and scd.
2800 Sun Sep 11 22:32:17 1994 Jeff Law (law@snake.cs.utah.edu)
2802 * hppa-dis.c (reg_names): Use r26-r23 for arg0-arg3.
2804 Tue Sep 6 11:37:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
2806 * mips-opc.c: Set INSN_STORE_MEMORY flag for all instructions
2807 which store a value into memory.
2809 Sun Sep 04 17:58:10 1994 Richard Earnshaw (rwe@pegasus.esprit.ec.org)
2811 * configure.in, Makefile.in, disassemble.c: Add support for the ARM.
2812 * arm-dis.c, arm-opc.h: New files.
2814 Fri Aug 5 14:00:05 1994 Stan Shebs (shebs@andros.cygnus.com)
2816 * Makefile.in (ns32k-dis.o): Add dependency.
2817 * ns32k-dis.c (print_insn_arg): Declare initialized local as
2818 string, not as array of chars.
2820 Thu Jul 28 18:14:16 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
2822 * sparc-dis.c (print_insn_sparc): Handle new operand type 'x'.
2824 * sparc-opc.c: Added sparclite extended FP operations, and
2825 versions of v9 impdep* instructions permitting specification of
2828 Tue Jul 26 16:36:03 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
2830 * i960-dis.c (reg_names): Now const.
2831 (struct sparse_tabent): New type, copied from array type in mem
2833 (ctrl): Local static array ctrl_tab now const.
2834 (cobr): Local static array cobr_tab now const.
2835 (mem): Local variables reg1, reg2, reg3 now point to const. Local
2836 static variable mem_tab no longer explicitly initialized. Changed
2837 mem_init to const array of struct sparse_tabent.
2838 (reg): Local static variable reg_tab no longer explicitly
2839 initialized. Changed reg_init to const array of struct
2841 (ea): Local static array scale_tab now const.
2843 * i960-dis.c (reg): Added i960JX instructions to reg_init table.
2846 Tue Jul 19 21:00:00 1994 DJ Delorie (dj@ctron.com)
2848 * configure.bat: the disassember needs to be enabled for
2849 "objdump -d" to work in djgpp.
2851 Wed Jul 13 18:01:58 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
2853 * ns32k-dis.c: Deleted all code in "#ifdef GDB".
2854 (invalid_float): Enabled general version, doesn't require running
2855 on ns32k host. Changed to take char* argument, and test for
2856 explicitly specified sizes, instead of using sizeof() on host CPU
2858 (INVALID_FLOAT): Cast first argument.
2859 (opt_u, opt_U, opt_O, opt_C, opt_S, list_P532, list_M532,
2860 list_P032, list_M032): Now const.
2861 (optlist, list_search): Made appropriate arguments now point to
2863 (print_insn_arg): Changed static array of one-character-string
2864 pointers into a static const array of characters; fixed sprintf
2865 statement accordingly.
2867 Sun Jul 10 00:27:47 1994 Ian Dall (dall@hfrd.dsto.gov.au)
2869 * opcodes/ns32k-dis.c: Semi-new file. Had apparently been dropped
2870 from distribution. A ns32k-dis.c from a previous distribution has
2871 been brought up to date and supports the new interface.
2873 * disassemble.c: define ARCH_ns32k and add case bfd_arch_ns32k.
2875 * configure.in: add bfd_ns32k_arch target support.
2877 * Makefile.in: add ns32k-dis.o to ALL_MACHINES.
2878 Add ns32k-dis.c to CFILES. Add dependencies for ns32k-dis.o.
2880 Wed Jun 29 22:10:37 1994 Steve Chamberlain (sac@cygnus.com)
2882 * h8300-dis.c (bfd_h8_disassemble): Get 16bit branch
2885 Tue Jun 28 13:22:06 1994 Stan Shebs (shebs@andros.cygnus.com)
2887 * h8300-dis.c, mips-dis.c: Don't use true and false.
2889 Thu Jun 23 12:53:19 1994 David J. Mackenzie (djm@rtl.cygnus.com)
2891 * configure.in: Change --with-targets to --enable-targets.
2893 Wed Jun 22 13:38:32 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
2895 * mips-dis.c (_print_insn_mips): Build a static hash table mapping
2896 opcodes to the first instruction with that opcode, to speed
2897 disassembly of large files. From ralphc@pyramid.com (Ralph
2900 Tue Jun 7 12:49:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2902 * Makefile.in (mostlyclean): Fix typo (was mostyclean).
2904 Wed May 11 22:32:00 1994 DJ Delorie (dj@ctron.com)
2906 * configure.bat: update to latest makefile.in
2908 Sat May 7 17:13:21 1994 Steve Chamberlain (sac@cygnus.com)
2910 * a29k-dis.c (print_insn): Print 'x' type operand in hex.
2911 * h8300-dis.c (bfd_h8_disassemble): Print 16bit rels correctly.
2912 * sh-dis.c (print_insn_sh): Don't recur endlessly if delay
2913 slot insn is in a delay slot.
2914 * z8k-opc.h: (resflg): Fix patterns.
2915 * h8500-opc.h Fix CR insn patterns.
2917 Fri May 6 14:34:46 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2919 * ppc-opc.c (powerpc_opcodes): Put PowerPC versions of "cmp" and
2920 "cmpl" before POWER versions, so that gas -many uses them.
2922 Thu Apr 28 18:32:36 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
2924 * disassemble.c: New file.
2925 * Makefile.in (OFILES): Add disassemble.o.
2926 (disassemble.o): Provide dependencies; compile with $(ARCHDEFS).
2927 * configure.in: Define ARCHDEFS in Makefile. Code taken from
2928 binutils/configure.in.
2930 * m68k-dis.c (print_insn_m68k): If F_ALIAS flag is set, skip the
2931 opcode being examined.
2933 Thu Apr 21 17:08:40 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2935 * ppc-opc.c (powerpc_operands): Added RAL, RAM and RAS.
2936 (insert_ral, insert_ram, insert_ras): New functions.
2937 (powerpc_opcodes): Use RAL for load with update, RAM for lmw, and
2938 RAS for store with update.
2940 Sat Apr 16 23:41:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2942 * ppc-opc.c (powerpc_opcodes): Correct fcir. From David Edelsohn
2943 (edelsohn@npac.syr.edu).
2945 Wed Apr 6 17:11:45 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2947 * mips-opc.c (mips_opcodes): Correct operands of "nor" with an
2950 Mon Apr 4 16:30:46 1994 Doug Evans (dje@canuck.cygnus.com)
2952 * sparc-opc.c (sparc_opcodes): Fix "rd %fprs,%l0".
2954 Mon Apr 4 13:22:00 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2956 * ppc-opc.c (powerpc_operands): The signedp field has been
2957 removed, so don't initialize it. Set the PPC_OPERAND_SIGNED flag
2958 instead. Add new operand SISIGNOPT.
2959 (powerpc_opcodes): For lis, liu, addis, and cau use SISIGNOPT.
2960 Based on patch from David Edelsohn (edelsohn@npac.syr.edu).
2961 * ppc-dis.c (print_insn_powerpc): Check PPC_OPERAND_SIGNED rather
2964 Wed Mar 30 00:31:49 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2966 * i386-dis.c (struct private): Renamed to dis_private. `private'
2967 is a reserved word for dynix cc.
2969 Mon Mar 28 13:00:15 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2971 * configure.in: Change error message to refer to bfd/config.bfd
2972 rather than bfd/configure.in.
2974 Mon Mar 28 12:28:30 1994 David Edelsohn (edelsohn@npac.syr.edu)
2976 * ppc-opc.c: Define POWER2 as short alias flag.
2977 (powerpc_opcodes): Add POWER/2 opcodes lfq*, stfq*, fcir[z], and
2980 Wed Mar 23 12:23:05 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2982 * i960-dis.c (print_insn_i960): Don't read a second word for
2983 opcodes 0, 1, 2 and 3.
2985 Wed Mar 16 15:37:58 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2987 * configure.in: Don't build m68881-ext.o for bfd_m68k_arch.
2989 Mon Mar 14 14:53:50 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2991 * m68881-ext.c: Removed; no longer used.
2992 * Makefile.in: Changed accordingly.
2994 * m68k-dis.c (ext_format_68881): Don't declare.
2995 (print_insn_m68k): If an instruction uses place 'i', it uses at
2996 least four fixed bytes.
2997 (print_insn_arg): Don't bump p by 2 for case 'I', place 'i'. For
2998 extended float, convert to double using floatformat_to_double, not
2999 ieee_extended_to_double, and fetch the data before converting it.
3001 Tue Mar 8 18:12:25 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3003 * mips-opc.c: It's sqrt.s, not sqrt.w. From
3004 davidj@ICSI.Berkeley.EDU (David Johnson).
3006 Tue Feb 8 16:55:27 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3008 * ppc-opc.c (powerpc_opcodes): The POWER uses bdn[l][a] where the
3009 PowerPC uses bdnz[l][a].
3011 Tue Feb 8 00:32:28 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3013 * dis-buf.c, i386-dis.c: Include sysdep.h.
3015 Mon Feb 7 19:22:23 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3017 * configure.in (bfd_powerpc_arch): Use ppc-dis.o and ppc-opc.o.
3019 * ppc-opc.c (powerpc_opcodes): Mark POWER instructions supported
3020 by Motorola PowerPC 601 with PPC_OPCODE_601.
3021 * ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc):
3022 Disassemble Motorola PowerPC 601 instructions as well as normal
3023 PowerPC instructions.
3025 Sun Feb 6 07:45:17 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
3027 * i960-dis.c (reg, mem): Just use a static array instead of
3030 Sat Feb 5 00:04:02 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
3032 * hppa-dis.c (print_insn_hppa): For '?' and '@' only adjust the
3033 condition name index if this is for a negated condition.
3035 * hppa-dis.c (print_insn_hppa): No space before 'H' operand.
3036 Floating point format for 'H' operand is backwards from normal
3037 case (0 == double, 1 == single). For '4', '6', '7', '9', and '8'
3038 operands (fmpyadd and fmpysub), handle bizarre register
3039 translation correctly for single precision format.
3041 * hppa-dis.c (print_insn_hppa): Do not emit a space after 'F'
3042 or 'I' operands if the next format specifier is 'M' (fcmp
3043 condition completer).
3045 Feb 4 23:38:03 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3047 * ppc-opc.c (powerpc_operands): New operand type MBE to handle a
3048 single number giving a bitmask for the MB and ME fields of an M
3049 form instruction. Change NB to accept 32, and turn it into 0;
3050 also turn 0 into 32 when disassembling. Seperated SH from NB.
3051 (insert_mbe, extract_mbe): New functions.
3052 (insert_nb, extract_nb): New functions.
3053 (SC_MASK): Mask out SA and LK bits.
3054 (powerpc_opcodes): Change "cal" to use RT, D, RA rather than RT,
3055 RA, SI. Change "liu" and "cau" to use UI rather than SI. Mark
3056 "bctr" and "bctrl" as accepted by POWER. Change "rlwimi",
3057 "rlimi", "rlwimi.", "rlimi.", "rlwinm", "rlinm", "rlwinm.",
3058 "rlinm.", "rlmi", "rlmi.", "rlwnm", "rlnm", "rlwnm.", "rlnm." to
3059 use MBE rather than MB. Add "mfmq" and "mtmq" POWER instructions.
3060 (powerpc_macros): Define table of macro definitions.
3061 (powerpc_num_macros): Define.
3063 * ppc-dis.c (print_insn_powerpc): Don't skip optional operands
3064 if PPC_OPERAND_NEXT is set.
3066 Sat Jan 22 23:10:07 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3068 * i960-dis.c (print_insn_i960): Make buffer bfd_byte instead of
3069 char. Retrieve contents using bfd_getl32 instead of shifting.
3071 Fri Jan 21 19:01:39 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3073 * ppc-opc.c: New file. Opcode table for PowerPC, including
3074 opcodes for POWER (RS/6000).
3075 * ppc-dis.c: New file. PowerPC and Power (RS/6000) disassembler.
3076 * Makefile.in (ALL_MACHINES): Add ppc-dis.o and ppc-opc.o.
3077 (CFILES): Add ppc-dis.c.
3078 (ppc-dis.o, ppc-opc.o): New targets.
3079 * configure.in: Build ppc-dis.o and ppc-opc.o for bfd_rs6000_arch.
3081 Mon Jan 17 20:05:49 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
3083 * hppa-dis.c (print_insn_hppa): Handle 'N' in assembler template.
3084 No space before 'u', 'f', or 'N'.
3086 Sun Jan 16 14:20:16 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
3088 * i386-dis.c (print_insn_i386): Add FIXME comment regarding reading
3089 farther than we should.
3091 * i386-dis.c (dis386): Use Yb and Yv for scasb and scasS.
3093 Thu Jan 6 12:38:05 1994 David J. Mackenzie (djm@thepub.cygnus.com)
3095 * sparc-dis.c m68k-dis.c alpha-dis.c a29k-dis.c: Fix comments.
3097 Wed Jan 5 11:56:21 1994 David J. Mackenzie (djm@thepub.cygnus.com)
3099 * i960-dis.c (print_insn_i960): Only read word2 if the instruction
3100 needs it, to prevent reading past the end of a section.
3102 Wed Nov 17 17:20:12 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3104 * mips-opc.h: Use macro for j instruction, to support SVR4 PIC.
3105 Removed t,A case for la; always use t,A(b) case.
3107 Mon Nov 8 12:37:36 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3109 From Ted Lemen <mellon@pepper.ncd.com>
3110 * mips-dis.c (print_insn_arg): Handle 'k'.
3111 * mips-opc.c: Make cache use k, not t.
3113 Sun Nov 7 23:52:34 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3115 * alpha-opc.h, alpha-dis.c (print_insn_alpha): Add
3116 FLOAT_MEMORY_FORMAT_CODE, FLOAT_BRANCH_FORMAT_CODE, correct
3117 FLOAT_FORMAT_CODE to put out floating point register names.
3119 Mon Nov 1 18:17:51 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3121 * mips-opc.c: Use macros for jal variants, to support SVR4 PIC.
3123 Thu Oct 28 17:42:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3125 * a29k-dis.c (print_insn): Use 0x%08x, not 0x%8x.
3127 Wed Oct 27 11:48:01 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3129 * mips-opc.c (dsll, dsra, dsrl): Added '>' cases for shift counts
3130 larger than 32. Moved dsxx32 variants first for disassembler.
3132 Mon Oct 25 11:33:14 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
3134 * z8kgen.c, z8k-opc.h: Add full lda information.
3136 Tue Oct 19 12:39:25 1993 Jeffrey A Law (law@cs.utah.edu)
3138 * hppa-dis.c (print_insn_hppa): Do not emit a space after
3139 movb instructions. Any necessary space will be emitted by
3140 the code to handle nullification completers.
3142 Wed Oct 13 16:19:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3144 * mips-opc.c: Moved l.d down so that it disassembles as ldc1.
3146 Fri Oct 8 02:34:21 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3148 * alpha-opc.h: Add ldl_l, fix typo for ldq_u.
3149 * alpha-dis.c (print_insn_alpha): Add code for PAL_FORMAT_CODE.
3151 Tue Oct 5 17:47:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3153 * mips-opc.c: Correct lwu opcode value (book had it wrong).
3155 Thu Sep 30 11:26:18 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
3157 * z8k-dis.c (FETCH_DATA): get just the right amount of data.
3158 (unpack_instr): Cope with ARG_IMM4M1 type instructions.
3160 Wed Sep 29 16:24:49 1993 K. Richard Pixley (rich@sendai.cygnus.com)
3162 * m88k-dis.c (m88kdis): comment change. Remove space after
3164 (printop): handle new arg types DEC and XREG for m88110.
3166 Tue Sep 28 19:20:16 1993 Jeffrey A Law (law@snake.cs.utah.edu)
3168 * hppa-dis.c (print_insn_hppa): Handle 'z' operand
3169 type for absolute branch addresses. Delete special
3170 "ble" and "be" code in 'W' operand code.
3172 Fri Sep 24 14:08:33 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3174 * mips-opc.c: Set hazard information correctly for branch
3175 likely instructions.
3177 Fri Sep 17 04:41:17 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3179 * alpha-dis.c (print_insn_alpha), alpha-opc.h: Fix bugs, use
3180 info->fprintf_func for printing and info->print_address_func for
3183 Wed Sep 15 12:12:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3185 * mips-opc.c: Set INSN_TRAP for tXX instructions.
3187 Thu Sep 9 10:11:27 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3189 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson):
3190 Corrected second case of "b" for disassembler.
3192 Tue Sep 7 14:25:15 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3194 * mips-dis.c, m88k-dis.c: Don't include libbfd.h. Changed calls
3195 to BFD swapping routines to correspond to BFD name changes.
3197 Thu Sep 2 10:35:25 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3199 * mips-opc.c: Change div machine instruction to be z,s,t rather
3200 than s,t. Change div macro to be d,v,t rather than d,s,t.
3201 Likewise for divu, ddiv, ddivu. Added z,s,t case for drem, dremu,
3202 rem and remu which generates only the corresponding div
3203 instruction. This is for compatibility with the MIPS assembler,
3204 which only generates the simple machine instruction when an
3205 explicit destination of $0 is used.
3206 * mips-dis.c (print_insn_arg): Handle 'z' (always register zero).
3208 Thu Aug 26 17:41:44 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3210 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Set
3211 WR_31 hazard for bal, bgezal, bltzal.
3213 Thu Aug 26 17:20:02 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3215 * hppa-dis.c (print_insn_hppa): Use print function
3216 from within the disassemble_info, not fprintf_filtered.
3218 Wed Aug 25 13:51:40 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3220 * hppa-dis.c (print_insn_hppa): Handle '|' like '>'. (From Jeff
3221 Law, law@cs.utah.edu.)
3223 Mon Aug 23 12:44:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3225 * mips-opc.c ("absu"): Removed.
3228 Fri Aug 20 10:52:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3230 * mips-opc.c: Added r6000 and r4000 instructions and macros.
3231 Changed hazard information to distinguish between memory load
3232 delays and coprocessor load delays.
3234 Wed Aug 18 15:39:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3236 * mips-opc.c: li.d uses "T,L", not "S,F". Added li.s.
3238 Tue Aug 17 09:44:42 1993 David J. Mackenzie (djm@thepub.cygnus.com)
3240 * configure.in: Don't pass cpu to config.bfd.
3242 Tue Aug 17 12:23:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3244 * m88k-dis.c (m88kdis): Make class unsigned.
3246 Thu Aug 12 15:08:18 1993 Ian Lance Taylor (ian@cygnus.com)
3248 * alpha-dis.c (print_insn_alpha): One branch format case was
3249 missing the instruction name.
3251 Wed Aug 11 19:29:39 1993 David J. Mackenzie (djm@thepub.cygnus.com)
3253 * Makefile.in (ALL_MACHINES): Renamed from DIS_LIBS.
3254 Add the arch-specific auxiliary files.
3255 (OFILES): Remove the arch-specific auxiliary files
3256 and use BFD_MACHINES instead of DIS_LIBS.
3257 * configure.in: Set BFD_MACHINES based on --with-targets option.
3259 Thu Aug 12 12:04:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3261 * mips-opc.c: Added lwc1 E,A(b) to go with lwc1 T,A(b). Similarly
3264 Sun Aug 8 15:09:30 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3266 * sparc-opc.c: Change CONST to const to deal with gcc
3267 -Dconst=__const -traditional.
3269 Fri Aug 6 10:58:55 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3271 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Took
3272 coprocessor instructions out of #if 0, and made them use new
3275 Thu Aug 5 17:11:06 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3277 * sparc-dis.c: Include ansidecl.h before opcodes/sparc.h.
3279 Fri Jul 30 18:48:15 1993 John Gilmore (gnu@cygnus.com)
3281 * sparc-opc.c: Add F_JSR, F_UNBR, or F_CONDBR flags to each branch
3282 instruction, for use by the disassembler.
3284 * sparc-dis.c (SEX): Add sign extension macro. Replace many
3285 hand-coded sign extensions that depended on 32-bit host ints.
3286 FIXME, we still depend on big-endian host bitfield ordering.
3287 (sparc_print_insn): Set the insn_info_valid field, and the
3288 other fields that describe the instruction being printed.
3290 Tue Jul 27 17:04:58 1993 Jim Wilson (wilson@sphagnum.cygnus.com)
3292 * sparc-opc.c (call): Accept all 6 addressing modes valid for
3293 `jmp' instead of just one of them.
3295 Wed Jul 21 11:43:32 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
3297 * hppa-dis.c: Move floating registers from reg_names to fp_reg_names.
3298 (fput_fp_reg_r): Renamed from fput_reg_r.
3299 (fput_fp_reg): New function.
3300 (print_insn_hppa): Use fput_fp_reg{,_r} where appropriate.
3302 * hppa-dis.c (print_insn_hppa, cases 'a', 'd'): Print space afterwards.
3304 * hppa-dis.c (print_insn_hppa, case 'd'): Use GET_COND not GET_FIELD.
3306 Mon Jul 19 13:52:21 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
3308 * hppa-dis.c (print_insn_hppa): Use extract_5r_store for 'r'.
3310 * hppa-dis.c (print_insn_hppa, case '>'): If next character is 'n',
3311 don't output a space.
3313 * hppa-dis.c (float_format_names): 10 is undefined, and 11 is quad.
3315 Sun Jul 18 16:30:02 1993 Jim Kingdon (kingdon@rtl.cygnus.com)
3317 * mips-opc.c: New file, containing opcode table from
3318 ../include/opcode/mips.h.
3319 * Makefile.in: Add it.
3321 Thu Jul 15 12:37:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3323 * m88k-dis.c: New file, moved in from gdb and changed to use the
3324 new dis-asm.h disassembler interface.
3325 * Makefile.in (DIS_LIBS): Added m88k-dis.o.
3326 (m88k-dis.o): New target.
3328 Tue Jul 13 10:04:16 1993 Ian Lance Taylor (ian@cygnus.com)
3330 * mips-dis.c (print_insn_arg, _print_insn_mips): Made pointer to
3331 argument string const char * to correspond to opcode/mips.h.
3333 Tue Jul 6 15:18:37 1993 Ian Lance Taylor (ian@cygnus.com)
3335 * mips-dis.c: Updated to account for name changes in new version
3337 * Makefile.in: Added header file dependencies.
3339 Sat Jul 3 23:47:56 1993 Doug Evans (dje@canuck.cygnus.com)
3341 * h8300-dis.c (bfd_h8_disassemble): Correct fetching of instruction.
3343 Thu Jul 1 12:23:38 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3345 * m68k-dis.c (NEXTWORD, NEXTLONG): Use ((x) ^ 0x8000) - 0x8000 to sign
3346 extend, rather than shifts.
3348 Sun Jun 20 20:56:56 1993 Ken Raeburn (raeburn@poseidon.cygnus.com)
3350 * Makefile.in: Undo 15 June change.
3352 Fri Jun 18 14:15:15 1993 Per Bothner (bothner@deneb.cygnus.com)
3354 * m68k-dis.c (print_insn_arg): Change return value to byte count
3356 * m68k-dis.c: Re-write to detect invalid operands before
3357 printing anything, so we can handle this the same way we
3358 handle invalid opcodes.
3360 Thu Jun 17 15:01:36 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
3362 * sh-dis.c, sh-opc.h: Understand some more opcodes.
3364 Wed Jun 16 13:48:05 1993 Ian Lance Taylor (ian@cygnus.com)
3366 * hppa-dis.c: Include <ansidecl.h> and sysdep.h before other
3369 Tue Jun 15 21:45:26 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3371 * sparc-dis.c: Don't declare qsort, since sysdep.h might.
3373 * configure.in: Do make sysdep.h link.
3374 * Makefile.in: Search ../include. Don't search ../bfd.
3376 Tue Jun 15 13:36:10 1993 Stu Grossman (grossman@cygnus.com)
3378 Changes from Jeff Law, law@cs.utah.edu:
3379 * hppa-dis.c: Fix typo. 'a' and 'd' were reversed.
3380 Do not print a space before the completers specified by
3383 Fri Jun 11 18:40:21 1993 Ken Raeburn (raeburn@cygnus.com)
3385 * mips-dis.c: No longer need to bomb out if HOST_64_BIT is
3386 defined, since gdb has been fixed.
3388 Changes from Jeff Law, law@cs.utah.edu:
3389 * hppa-dis.c (print_insn_hppa): Last argument to fput_reg,
3390 fput_reg_r, fput_creg, fput_const, and fputs_filtered should
3391 be a *disassemble_info, not a *FILE.
3392 * hppa-dis.c: Support 'd', '!', and 'a'.
3393 * hppa-dis.c: Support 's' to extract a 2 bit space register.
3394 * hppa-dis.c: Delete cases which are no longer needed.
3396 Fri Jun 11 07:53:48 1993 Jim Kingdon (kingdon@cygnus.com)
3398 * m68k-dis.c (print_insn_{m68k,arg}): Add MMU codes.
3400 Tue Jun 8 12:25:01 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
3402 * h8300-dis.c: New file, removed from bfd/cpu-h8300.c, with
3405 Mon Jun 7 12:58:49 1993 Per Bothner (bothner@rtl.cygnus.com)
3407 * Makefile.in (CSEARCH): Add -I../bfd for sysdep.h and bfd.h.
3408 * configure.in: No longer need to configure to get sysdep.h.
3410 Thu Jun 3 15:56:49 1993 Stu Grossman (grossman@cygnus.com)
3412 * Patches from Jeffrey Law <law@cs.utah.edu>.
3413 * hppa-dis.c: Support 'I', 'J', and 'K' in output
3414 templates for 1.1 FP computational instructions.
3416 Tue May 25 13:05:48 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3418 * h8500-dis.c (print_insn_h8500): Address argument is type
3420 * z8k-dis.c (print_insn_z8k, print_insn_z8001, print_insn_z8002):
3423 * h8500-opc.h (addr_class_type): No comma at end of enumerator.
3424 * sh-opc.h (sh_nibble_type, sh_arg_type): Ditto.
3426 * sparc-dis.c (compare_opcodes): Move static declaration to
3429 Fri May 21 14:17:37 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3431 * sparc-dis.c (print_insn_sparc): Implement 'n' argument for unimp
3432 instruction, remove unimp hack from 'l' argument.
3434 Wed May 19 15:35:54 1993 Stu Grossman (grossman@cygnus.com)
3436 * z8k-dis.c (fetch_data): Use unsigned char to make ancient gcc's
3439 Fri May 14 15:22:46 1993 Ian Lance Taylor (ian@cygnus.com)
3441 * Based on patches from davidj@ICSI.Berkeley.EDU (David Johnson):
3442 * mips-dis.c (print_insn_arg): Handle 'C' for general coprocessor
3445 Fri May 14 00:09:14 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3447 * hppa-dis.c: Include dis-asm.h before sysdep.h. Changed some
3448 arrays of string pointers to 2-d arrays of chars, to save
3451 Thu May 6 20:51:17 1993 Fred Fish (fnf@cygnus.com)
3453 * a29k-dis.c, alpha-dis.c, i960-dis.c, sparc-dis.c, z8k-dis.c:
3454 Cast second arg to read_memory_func to "bfd_byte *", as necessary.
3456 Tue May 4 20:31:10 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3458 * hppa-dis.c: New file from Utah, adapted to new disassembler
3460 * Makefile.in: Include it.
3462 Mon Apr 26 18:17:42 1993 Steve Chamberlain (sac@thepub.cygnus.com)
3464 * sh-dis.c, sh-opc.h: New files.
3466 Fri Apr 23 18:51:22 1993 Steve Chamberlain (sac@thepub.cygnus.com)
3468 * alpha-dis.c, alpha-opc.h: New files.
3470 Tue Apr 6 12:54:08 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3472 * mips-dis.c: Sign extend 'j' and 'b' arguments, delta is a signed
3475 Mon Apr 5 17:37:37 1993 John Gilmore (gnu@cygnus.com)
3477 * sparc-dis.c: Make "ta" the default trap instruction, "t" the alias.
3479 Fri Apr 2 07:24:27 1993 Ian Lance Taylor (ian@cygnus.com)
3481 * a29k-dis.c, sparc-dis.c, sparc-opc.c: Use CONST rather than
3484 Thu Apr 1 11:20:43 1993 Jim Kingdon (kingdon@cygnus.com)
3486 * sparc-dis.c: Use fprintf_func a few places where I forgot,
3487 and double percent signs a few places.
3489 * a29k-dis.c, i960-dis.c: New, merged from gdb and binutils.
3491 * i386-dis.c, m68k-dis.c, mips-dis.c, sparc-dis.c:
3492 Use info->print_address_func not print_address.
3494 * dis-buf.c (generic_print_address): New function.
3496 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3498 * Makefile.in: Add sparc-dis.c.
3499 sparc-dis.c: New file, merges binutils and gdb versions as follows:
3501 Add `add' instruction to the set that get checked
3502 for a preceding `sethi' in order to print an absolute address.
3503 * (print_insn): Disassembly prefers real instructions.
3504 (is_delayed_branch): Speed up.
3505 * sparc-opcode.h: Add ALIAS bit to aliases. Fix up opcode tables.
3506 Still missing some float ops, and needs testing.
3507 * sparc-pinsn.c (print_insn): Eliminate 'set' test, subsumed by
3508 F_ALIAS. Use printf, not fprintf, when not passing a file
3510 (compare_opcodes): Check that identical instructions have
3511 identical opcodes, complain otherwise.
3514 * Include reg_names.
3516 Use dis-asm.h/read_memory_func interface.
3518 Wed Mar 31 20:49:06 1993 K. Richard Pixley (rich@rtl.cygnus.com)
3520 * h8500-dis.c, i386-dis.c, m68k-dis.c, z8k-dis.c (fetch_data):
3521 deliberately return non-zero to setjmp from longjmp. Otherwise
3522 this code fails to compile.
3524 Wed Mar 31 17:04:31 1993 Stu Grossman (grossman@cygnus.com)
3526 * m68k-dis.c: Fix prototype for fetch_arg().
3528 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3530 * dis-buf.c: New file, for new read_memory_func interface.
3531 Makefile.in (OFILES): Include it.
3532 m68k-dis.c, i386-dis.c, h8500-dis.c, mips-dis.c, z8k-dis.c:
3533 Use new read_memory_func interface.
3535 Mon Mar 29 14:02:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
3537 * h8500-dis.c (print_insn_h8500): Get sign of fp offsets right.
3538 * h8500-opc.h: Fix couple of opcodes.
3540 Wed Mar 24 02:03:36 1993 david d `zoo' zuhn (zoo at poseidon.cygnus.com)
3542 * Makefile.in: add dvi & installcheck targets
3544 Mon Mar 22 18:55:04 1993 John Gilmore (gnu@cygnus.com)
3546 * Makefile.in: Update for h8500-dis.c.
3548 Fri Mar 19 14:27:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
3550 * h8500-dis.c, h8500-opc.h: New files
3552 Thu Mar 18 14:12:37 1993 Per Bothner (bothner@rtl.cygnus.com)
3554 * mips-dis.c, z8k-dis.c: Converted to use interface defined in
3555 ../include/dis-asm.h.
3556 * m68k-dis.c: New file (merge of ../binutils/m68k-pinsn.c
3557 and ../gdb/m68k-pinsn.c).
3558 * i386-dis.c: New file (merge of ../binutils/i386-pinsn.c
3559 and ../gdb/i386-pinsn.c).
3560 * m68881-ext.c: New file. Moved definition of
3561 ext_format ext_format_68881 from ../gdb/m68k-tdep.c.
3562 * Makefile.in: Adjust for new files.
3563 * i386-dis.c: Patches from John Hassey (hassey@dg-rtp.dg.com).
3564 * m68k-dis.c: Recognize '9' placement code, so (say) pflush
3565 can be dis-assembled.
3567 Wed Feb 17 09:19:47 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3569 * mips-dis.c (print_insn_arg): Now returns void.
3571 Mon Jan 11 16:09:16 1993 Fred Fish (fnf@cygnus.com)
3573 * mips-dis.c (ansidecl.h): Include for benefit of sysdep.h
3574 files that use the macros.
3576 Thu Jan 7 13:15:17 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3578 * mips-dis.c: New file, from gdb/mips-pinsn.c.
3579 * Makefile.in (DIS_LIBS): Added mips-dis.o.
3580 (CFILES): Added mips-dis.c.
3582 Thu Jan 7 07:36:33 1993 Steve Chamberlain (sac@thepub.cygnus.com)
3584 * z8k-dis.c (print_insn_z8001, print_insn_z8002): new routines
3585 * z8kgen.c, z8k-opc.h: fix sizes of some shifts.
3587 Tue Dec 22 15:42:44 1992 Per Bothner (bothner@rtl.cygnus.com)
3589 * Makefile.in: Improve *clean rules.
3590 * configure.in: Allow a default host.
3592 Tue Nov 17 19:53:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
3594 * Makefile.in: also use -I$(srcdir)/../bfd, since some sysdep
3595 files include other sysdep files
3597 Thu Nov 12 16:10:37 1992 Steve Chamberlain (sac@thepub.cygnus.com)
3599 * z8k-dis.c z8k-opc.h z8kgen.c: checkpoint
3601 Fri Oct 9 04:56:05 1992 John Gilmore (gnu@cygnus.com)
3603 * configure.in: For host support, use ../bfd/configure.host
3604 so it stays in sync with the ../bfd/hosts database.
3606 Thu Oct 1 23:38:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
3608 * configure.in: use cpu-vendor-os triple instead of nested cases
3610 Wed Sep 30 16:09:20 1992 Michael Werner (mtw@cygnus.com)
3612 * z8k-dis.c (unparse_instr): fix bug where opcode returned was
3613 *always* the wrong one.
3615 Wed Sep 30 07:42:17 1992 Steve Chamberlain (sac@thepub.cygnus.com)
3617 * z8kgen.c: added copyright info
3619 Tue Sep 29 12:20:21 1992 Steve Chamberlain (sac@thepub.cygnus.com)
3621 * z8k-dis.c (unparse_instr): prettier tabs
3622 * z8kgen.c -> z8k-opc.h: bug fixes in tables
3624 Fri Sep 25 12:50:32 1992 Stu Grossman (grossman at cygnus.com)
3626 * configure.in: Add ncr* configuration.
3627 * z8k-dis.c (struct instr_data_s): Make instr_asmsrc char to make
3628 picayune ANSI compilers happy.
3630 Sep 20 08:50:55 1992 Fred Fish (fnf@cygnus.com)
3632 * configure.in (i386): Make i386 and i486 synonymous for now.
3633 * configure.in (i[34]86-*-sysv4): Add my_host definition.
3635 Fri Sep 18 17:01:23 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
3637 * Makefile.in (install): Fix typo.
3639 Fri Sep 18 02:04:24 1992 John Gilmore (gnu@cygnus.com)
3641 * Makefile.in (make): Remove obsolete crud.
3642 (sparc-opc.o): Avoid Sun Make VPATH bug.
3644 Tue Sep 8 17:29:27 1992 K. Richard Pixley (rich@sendai.cygnus.com)
3646 * Makefile.in: since there are no SUBDIRS, remove rule and
3647 references of subdir_do.
3649 Tue Sep 8 17:02:58 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
3651 * Makefile.in (install): Get the library name right here too.
3652 Don't install bfd.h, since it's unrelated to this library. No
3653 subdirs to recurse into, either.
3654 (CFILES): The source file has a .c suffix, not .o.
3656 * sparc-opc.c: New file, moved from BFD.
3657 * Makefile.in (OFILES): Build it.
3659 Thu Sep 3 16:59:20 1992 Michael Werner (mtw@cygnus.com)
3661 * z8k-dis.c: fixed forward refferences of some declarations.
3663 Mon Aug 31 16:09:45 1992 Michael Werner (mtw@cygnus.com)
3665 * Makefile.in: get the name of the library right
3667 Mon Aug 31 13:47:35 1992 Steve Chamberlain (sac@thepub.cygnus.com)
3669 * z8k-dis.c: knows how to disassemble z8k stuff
3670 * z8k-opc.h: new file full of z8000 opcodes
3674 version-control: never