opcodes/ChangeLog

   1 2001-10-29  Kazu Hirata  <kazu@hxi.com>
   2
   3         * d30v-dis.c: Fix a comment typo.
   4
   5 2001-10-23  Chris Demetriou  <cgd@broadcom.com>
   6
   7         * mips-opc.c (mips_builtin_opcodes): Mark "bgezall" and
   8         "bltzall" as writing GPR 31 (since they do).
   9
  10         * mips-dis.c (print_insn_arg): Calculate info->target
  11         where appropriate.
  12         (print_insn_mips): Fill in instruction info.
  13         (print_mips16_insn_arg): Remove unneded variable 'val'.
  14         Removed duplicated instruction target calculations,
  15         calculate once and print that result.  Use same idiom for
  16         masking the jump segment bits as is used in print_insn_arg.
  17
  18 2001-10-20  Alan Modra  <amodra@bigpond.net.au>
  19
  20         * ppc-opc.c (CT): Make it an optional operand.
  21
  22 2001-10-17  Chris Demetriou  <cgd@broadcom.com>
  23
  24         * mips-dis.c (mips_isa_type): Make the ISA used to disassemble
  25         SB-1 binaries include instructions specific to the SB-1.
  26         * mips-opc.c (SB1): New definition.
  27         (mips_builtin_opcodes): Add SB-1 extension opcodes "div.ps",
  28         "recip.ps", "rsqrt.ps", and "sqrt.ps".
  29
  30 2001-10-17  matthew green  <mrg@redhat.com>
  31
  32         * ppc-opc.c (STRM): New AltiVec operand.
  33         (XDSS): New AltiVec instruction form.
  34         (mtvscr): Correct operand list.
  35         (dst, dstt, dstst, dststt, dss, dssall): AltiVec instructions.
  36
  37 2001-10-17  Alan Modra  <amodra@bigpond.net.au>
  38
  39         * po/POTFILES.in: Regenerate.
  40
  41 2001-10-13  matthew green  <mrg@redhat.com>
  42
  43         * ppc-opc.c (MO): New macro for MO field of mbar instruction.
  44         (powerpc_opcodes): Add rfci, wrtee, wrteei, mfdcrx, mfdcr,
  45         mtdcrx, mtdcr, msync, dcba and mbar as BookE instructions.
  46
  47 2001-10-13  Nick Clifton  <nickc@cambridge.redhat.com>
  48
  49         * cgen-ibld.in: Include safe-ctype.h in preference to
  50         ctype.h.
  51         * cgen-asm.in: Include safe-ctype.h in preference to
  52         ctype.h.  Fix formatting.  Use ISSPACE instead of isspace and
  53         TOLOWER instead of tolower.
  54         (@arch@_cgen_build_insn_regex): Remove duplication of syntax
  55         string elements in constructed regular expression.
  56         * fr30-asm.c: Regenerate.
  57         * fr30-desc.c: Regenerate.
  58         * fr30-ibld.c: Regenerate.
  59         * m32r-asm.c: Regenerate.
  60         * m32r-desc.c: Regenerate.
  61         * m32r-ibld.c: Regenerate.
  62         * openrisc-asm.c: Regenerate.
  63         * openrisc-desc.c: Regenerate.
  64         * openrisc-ibld.c: Regenerate.
  65         * po/opcodes.pot: Regenerate.
  66
  67 2001-10-12  matthew green  <mrg@redhat.com>
  68
  69         * ppc-opc.c (insert_de, extract_de, insert_des, extract_des): New
  70         instruction field instruction/extraction functions for new BookE
  71         DE form instructions.
  72         (CT): New macro for CT field in an X form instruction.
  73         (DE, DES, DEO, DE_MASK): New macros for DE/DES fields in DE form
  74         instructions.
  75         (PPC64): Don't include PPC_OPCODE_PPC.
  76         (403): New opcode macro for PPC403 processors.
  77         (BOOKE): New opcode macro for BookE processors.
  78         (bce, bcel, bcea, bcela, bclre, bclrel: New BookE instructions.
  79         (bcctre, bcctrel, be, bel, bea, bela, icbt, icbte, lwzxe): Likewise.
  80         (dcbste, lwzuxe, luxe, dcbfe, lbzxe, lwarxe, lbzuxe): Likewise.
  81         (stwcxe, stwxe, stxe, stwuxe, stuxe, stbxe, dcbtste, stbuxe): Likewise.
  82         (mfapidi, dcbte, lhzxe, lhzuxe, lhaxe, lhauxe, subfe64): Likewise.
  83         (subfeo64, adde64, addeo64, sthxe, sthuxe, subfze64): Likewise.
  84         (subfzeo64, addze64, addzeo64, dcbie, subfme64, subfmeo64): Likewise.
  85         (addme64, addmeo64, stdcxe., mcrxr64, lwbrxe, lfsxe, lfsuxe): Likewise.
  86         (lfdxe, lfduxe, stwbrxe, stfsxe, stfsuxe, stfdxe, dcbae): Likewise.
  87         (stfduxe, tlbivax, tlbivaxe, lhbrxe, ldxe, lduxe, tlbsx): Likewise.
  88         (tlbsxe, sthbrxe, stdxe, stduxe, icbie, stfiwxe, dcbze, lbze): Likewise.
  89         (lbzue, ldue, lhze, lhzue, lhae, lhaue, lwze, lwzue): Likewise.
  90         (stbe, stbue, sthe, sthue, stwe, stwue, lfse, lfsue, lfde): Likewise.
  91         (lfdue, stde, stdue, stfse, stfsue, stfde, stfdue): Likewise.
  92
  93         * ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc): Look
  94         for a disassembler option of `booke', `booke32' or `booke64' to enable
  95         BookE support in the disassembler.
  96
  97 2001-10-12  John Healy  <jhealy@redhat.com>
  98
  99         * cgen-dis.in (print_insn): Use min (cd->base_insn_bitsize, buflen*8)
 100         for the length when extracting the base part of the insn.
 101
 102 2001-10-09  Bruno Haible  <haible@clisp.cons.org>
 103
 104         * cgen-asm.in (*_cgen_build_insn_regex): Generate a case sensitive
 105         regular expression.  Fix some formatting problems.
 106         * fr30-asm.c: Regenerate.
 107         * openrisc-asm.c: Regenerate.
 108         * m32r-asm.c: Regenerate.
 109
 110 2001-10-09  Christian Groessler <cpg@aladdin.de>
 111
 112         * z8k-dis.c (unparse_instr): Fixed formatting. Change disassembly
 113         of indirect register memory accesses to be same format the
 114         assembler accepts.
 115
 116 2001-10-09  Nick Clifton  <nickc@cambridge.redhat.com>
 117
 118         * sh-opc.h: Fix encoding of least significant nibble of the
 119         DSP single data transfer instructions.
 120
 121         * sh-dis.c (print_insn_shx): Fix decoding of As opcode in DSP
 122         instructions.
 123
 124 2001-10-08  Nick Clifton  <nickc@cambridge.redhat.com>
 125
 126         * cgen-asm.in: Fix compile time warning messages in generated
 127         C files.
 128         * cgen-dis.in: The same.
 129         * cgen-ibld.in: The same.
 130         * fr30-asm.c: Regenerate.
 131         * fr30-desc.c: Regenerate.
 132         * fr30-dis.c: Regenerate.
 133         * fr30-ibld.c: Regenerate.
 134         * fr30-opc.c: Regenerate.
 135         * m32r-asm.c: Regenerate.
 136         * m32r-desc.c: Regenerate.
 137         * m32r-dis.c: Regenerate.
 138         * m32r-ibld.c: Regenerate.
 139         * m32r-opc.c: Regenerate.
 140         * m32r-opinst.c Regenerate.
 141         * openrisc-asm.c: Regenerate.
 142         * openrisc-desc.c: Regenerate.
 143         * openrisc-dis.c: Regenerate.
 144         * openrisc-ibld.c: Regenerate.
 145         * openrisc-opc.c: Regenerate.
 146         * openrisc-opc.h: Regenerate.
 147         * Makefile.in: Regenerate.
 148         * po/POTFILES.in: Regenerate.
 149         * po/opcodes.pot: Regenerate.
 150
 151 2001-10-08  Aldy Hernandez  <aldyh@redhat.com>
 152
 153         * arm-opc.h (arm_opcodes): Add cirrus insns.
 154
 155         * arm-dis.c (print_insn_arm): Add 'I' case.
 156
 157 2001-10-03  Alan Modra  <amodra@bigpond.net.au>
 158
 159         * po/POTFILES.in: Regenerate.
 160         * configure: Regenerate.
 161
 162 2001-10-02  Alan Modra  <amodra@bigpond.net.au>
 163
 164         * Makefile.am (Makefile): Depend on bfd/configure.in.
 165         Run "make dep-am".
 166         * Makefile.in: Regenerate.
 167
 168 2001-09-30  John Healy  <jhealy@redhat.com>
 169
 170         * cgen-ibld.in (insert_1): Switched bfd_get_bits and bfd_set_bits
 171         calls to cgen_get_insn_value and cgen_put_insn_value calls.
 172         (extract_1): Switched bfd_get_bits call to cgen_get_insn_value call.
 173
 174 2001-09-30  Hans-Peter Nilsson  <hp@bitrange.com>
 175
 176         * Makefile.am: Update dependencies with "make dep-am".
 177         * Makefile.in: Regenerate.
 178
 179 2001-09-26  Alan Modra  <amodra@bigpond.net.au>
 180
 181         * arc-dis.c: Formatting fixes.
 182         (my_sprintf): Define using VPARAMS, VA_OPEN, VA_FIXEDARG, VA_CLOSE.
 183
 184 2001-09-21  Bruno Haible  <haible@clisp.cons.org>
 185
 186         * arc-dis.c: Don't include <ctype.h>.
 187         * openrisc-desc.c: Likewise.
 188         * openrisc-ibld.c: Likewise.
 189
 190 2001-09-20  Nick Clifton  <nickc@cambridge.redhat.com>
 191
 192         * fr30-opc.c: Fix compile time warning messages.
 193         * i370-opc.c: Fix compile time warning messages.
 194         * i960-dis.c: Fix compile time warning messages.
 195         * m32r-asm.c: Fix compile time warning messages.
 196         * m32r-desc.c: Fix compile time warning messages.
 197         * m32r-dis.c: Fix compile time warning messages.
 198         * m32r-ibld.c: Fix compile time warning messages.
 199         * m32r-opc.c: Fix compile time warning messages.
 200         * m32r-opinst.c: Fix compile time warning messages.
 201         * ns32k-dis.c: Fix compile time warning messages.
 202         * openrisc-asm.c: Fix compile time warning messages.
 203         * openrisc-desc.c: Fix compile time warning messages.
 204         * openrisc-dis.c: Fix compile time warning messages.
 205         * openrisc-ibld.c: Fix compile time warning messages.
 206         * openrisc-opc.c: Fix compile time warning messages.
 207         * pdp11-dis.c: Fix compile time warning messages.
 208         * tic54x-dis.c: Fix compile time warning messages.
 209         * v850-opc.c: Fix compile time warning messages.
 210         * vax-dis.c: Fix compile time warning messages.
 211         * w65-opc.h: Fix compile time warning messages.
 212         * z8k-opc.h: Fix compile time warning messages.
 213         * z8kgen.c: Fix compile time warning messages.
 214
 215 2001-09-19  Nick Clifton  <nickc@cambridge.redhat.com>
 216
 217         * arm-dis.c:   Fix compile time warning messages.
 218         * cgen-asm.c:  Fix compile time warning messages.
 219         * cgen-dis.c:  Fix compile time warning messages.
 220         * cris-dis.c:  Fix compile time warning messages.
 221         * d10v-dis.c:  Fix compile time warning messages.
 222         * fr30-asm.c:  Fix compile time warning messages.
 223         * fr30-desc.c: Fix compile time warning messages.
 224         * fr30-dis.c:  Fix compile time warning messages.
 225         * fr30-ibld.c: Fix compile time warning messages.
 226
 227 2001-09-18  Bruno Haible  <haible@clisp.cons.org>
 228
 229         * cgen-asm.c: Include "safe-ctype.h" instead of <ctype.h>.
 230         (cgen_parse_keyword): Use ISALNUM instead of isalnum.
 231         * cgen-opc.c: Include "safe-ctype.h" instead of <ctype.h>.
 232         (cgen_keyword_lookup_name): Use ISALPHA/TOLOWER instead of
 233         isalpha/tolower.
 234         (cgen_keyword_add): Use ISALNUM instead of isalnum.
 235         (hash_keyword_name): Use TOLOWER instead of tolower.
 236         * fr30-asm.c: Include "safe-ctype.h" instead of <ctype.h>.
 237         (parse_insn_normal): Use TOLOWER/ISSPACE instead of
 238         tolower/isspace.
 239         (fr30_cgen_assemble_insn): Use ISSPACE instead of isspace.
 240         * fr30-desc.c: Don't include <ctype.h>.
 241         * fr30-ibld.c: Likewise.
 242         * ia64-gen.c: Include "safe-ctype.h" instead of <ctype.h>.
 243         (load_insn_classes, parse_resource_users, load_depfile): Use
 244         ISSPACE instead of isspace.
 245         * m32r-asm.c: Include "safe-ctype.h" instead of <ctype.h>.
 246         (parse_insn_normal): Use TOLOWER/ISSPACE instead of
 247         tolower/isspace.
 248         (m32r_cgen_assemble_insn): Use ISSPACE instead of isspace.
 249         * m32r-desc.c: Don't include <ctype.h>.
 250         * m32r-ibld.c: Likewise.
 251         * openrisc-asm.c: Include "safe-ctype.h" instead of <ctype.h>.
 252         (parse_insn_normal): Use TOLOWER/ISSPACE instead of
 253         tolower/isspace.
 254         (openrisc_cgen_assemble_insn): Use ISSPACE instead of isspace.
 255
 256 2001-09-18  Martin Schwidefsky <schwidefsky@de.ibm.com>
 257
 258         * Makefile.am: Add rules and dependencies to create the s/390 opcode
 259         table out of s390-opc.txt automatically.
 260         * configure.in: Add BFD_CC_FOR_BUILD to allow CC_FOR_BUILD to be used.
 261         * s390-mkopc.c (dumpTable): Change output to create a complete file.
 262         * s390-opc.c: New improved opcode format macros and remove the
 263         pregenerated opcode table.
 264         * s390-opc.txt: Adapt to new improved opcode format macros.
 265
 266 2001-09-14  David Schleef <ds@schleef.org>
 267
 268         * ppc-opc.c (VXA, VXA_MASK): Fix mask bits.
 269
 270 2001-09-04  Alan Modra  <amodra@bigpond.net.au>
 271
 272         * i386-dis.c (grps): Don't print the implicit al/ax/eax register
 273         for opcode 0xf6 or 0xf7 forms of mul, imul, div, idiv insns.
 274
 275 2001-08-31  Eric Christopher  <echristo@redhat.com>
 276             Jason Eckhardt    <jle@redhat.com>
 277
 278         * mips-dis.c: Add support for bfd_mach_mipsisa32 and
 279         bfd_mach_mipsisa64. Remove bfd_mach_mips32, bfd_mach_mips32_4k,
 280         bfd_mach_mips64.
 281
 282 2001-08-31  Andreas Jaeger  <aj@suse.de>
 283
 284         * tic54x-opc.c: Add default initializers to avoid warnings.
 285
 286         * arc-opc.c: Include "sysdep.h" to get stdio.h as include file.
 287         * arc-ext.c: Likewise.
 288
 289 2001-08-28  matthew gren  <mrg@redhat.com>
 290
 291         * ppc-opc.c (icbt): Order correctly.
 292
 293 2001-08-27  David Edelsohn  <dje@watson.ibm.com>
 294             Torbjorn Granlund  <tege@swox.com>
 295
 296         * ppc-opc.c (DS): Add PPC_OPERAND_DS flag.
 297         (LS): Define.
 298         (insert_ds): Complain if not a multiple of 4.
 299         (XSYNC): Define.
 300         (XSYNC_MASK): Define.
 301         (powerpc_opcodes): Add "slbmte", "lwsync", "ptesync", "slbmfev",
 302         "slbmfee".  Modify "sync" to use XSYNC_MASK and LS.
 303
 304 2001-08-26  Andreas Jaeger  <aj@suse.de>
 305
 306         * h8500-opc.h: Add default initializers to h8500_table to shut up
 307         GCC warnings.
 308
 309 2001-08-25  Andreas Jaeger  <aj@suse.de>
 310
 311         * tic54x-dis.c: Add unused attributes where needed.
 312
 313         * z8k-dis.c (output_instr): Add unused attribute.
 314
 315         * h8300-dis.c: Add missing prototypes.
 316         (bfd_h8_disassemble): Make static.
 317
 318         * cris-dis.c: Add missing prototype.
 319         * h8500-dis.c: Likewise.
 320         * m68hc11-dis.c: Likewise.
 321         * pj-dis.c: Likewise.
 322         * tic54x-dis.c: Likewise.
 323         * v850-dis.c: Likewise.
 324         * vax-dis.c: Likewise.
 325         * w65-dis.c: Likewise.
 326         * z8k-dis.c: Likewise.
 327
 328         * d10v-dis.c: Add missing prototype.
 329         (dis_long): Remove unused variable.
 330         (dis_2_short): Likewise.
 331
 332         * sh-dis.c: Add missing prototypes.
 333         * v850-opc.c: Likewise.
 334         Add unused attributes where needed.
 335
 336         * ns32k-dis.c: Add missing prototypes.
 337         (bit_extract_simple): Remove unused variable.
 338
 339 2001-08-23  Martin Schwidefsky  <schwidefsky@de.ibm.com>
 340
 341         * opcodes/s390-opc.c: Add "low or high" and "not low or high"
 342         branch instructions for gcc 3.0.
 343         * opcodes/s390-opc.txt: Likewise.
 344
 345 2001-08-21  Andreas Jaeger  <aj@suse.de>
 346
 347         * i960-dis.c: Add parameters for prototypes
 348         (ctrl): Add unused attributes.
 349         (cobr): Likewise.
 350         (put_abs): Likewise.
 351
 352         * mips-dis.c: Add missing prototypes.
 353         * a29k-dis.c: Likewise.
 354         * arc-dis.c: Likewise.
 355         * ia64-opc.c: Likewise.
 356
 357         * s390-dis.c: Add missing prototypes.
 358         (init_disasm): Remove unused attribute since the parameter is
 359         used.
 360
 361 2001-08-16  Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
 362
 363         * mips-opc.c (M1): Define. Reformatted Code.
 364         (mips_builtin_opcodes): Added performance counter opcodes mfpc, mfps,
 365         mtps, mtps. Typo.
 366
 367 2001-08-16  Jonathan Larmour  <jlarmour@redhat.com>
 368
 369         * mips-opc.c: R3900s can support all branch likely INSN_MACROs where
 370         the corresponding non-likely insn is in MIPS I.
 371
 372 2001-08-13  Kazu Hirata  <kazu@hxi.com>
 373
 374         * mcore-dis.c: Fix formatting.
 375         * mips-dis.c: Likewise.
 376         * pj-dis.c: Likewise.
 377         * z8k-dis.c: Likewise.
 378
 379 2001-08-12  Richard Henderson  <rth@redhat.com>
 380
 381         * cgen-ibld.in (extract_normal): Match type of VALUE and MASK
 382         to *VALUEP.  Regenerate all cgen files.
 383
 384 2001-08-10  Richard Sandiford  <rsandifo@redhat.com>
 385
 386         * mips-dis.c (print_insn_mips): Remove OPCODE_IS_MEMBER's gp32
 387         argument.
 388         * mips-opc.c (G6): Undefine.
 389         (mips_builtin_opcodes): Remove gp32 entry for "move".  Add macro
 390         as the first "move" alternative.
 391
 392 2001-08-10  Andreas Jaeger  <aj@suse.de>
 393
 394         * configure.in: Add -Wstrict-prototypes and -Wmissing-prototypes
 395         to build warnings.
 396         * configure: Regenerate.
 397
 398 2001-08-10  Alan Modra  <amodra@bigpond.net.au>
 399
 400         * ppc-opc.c: Revert 2001-08-08.
 401
 402 2001-08-09  Alan Modra  <amodra@bigpond.net.au>
 403
 404         * dis-buf.c (generic_strcat_address): Add missing prototype.
 405         #if 0 the functions as it is unused.
 406
 407 2001-08-08  Alan Modra  <amodra@bigpond.net.au>
 408
 409         1999-10-25  Torbjorn Granlund  <tege@swox.com>
 410         * ppc-opc.c: Include "bfd.h".
 411         (powerpc_operands): Add new field for reloc type.
 412
 413 2001-07-21  Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
 414
 415         * mips-dis.c (print_insn_arg): Don't use software integer registers
 416         for coprocessor registers.
 417         (get_mips_isa): Removed.
 418         (is_newabi): New function, checks if NewABI is used.
 419         (_print_insn_mips): Get distinction between old ABI and new ABI right.
 420
 421 2001-08-01  Christian Groessler <cpg@aladdin.de>
 422
 423         * z8kgen.c: Fixed indentation of opt[] array.  Include stdio.h to
 424         get stderr definition.
 425         (internal, gas): Removed warnings.
 426         (gas): Create a correct final entry for created array.
 427         * z8k-opc.h: Recreated with new z8kgen.
 428
 429 2001-07-28  Kazu Hirata  <kazu@hxi.com>
 430
 431         * i386-dis.c: Fix formatting.
 432
 433 2001-07-28  Matthias Kramm <kramm@quiss.org>
 434
 435         * i386-dis.c: Change formatting conventions for architecture
 436         i386:intel to better match the format of various intel i386
 437         assemblers, like nasm, tasm or masm.
 438
 439 2001-07-24  Alan Modra  <amodra@bigpond.net.au>
 440
 441         * Makefile.am: Update dependencies with "make dep-am".
 442         * Makefile.in: Regenerate
 443
 444 2001-07-24  Kazu Hirata  <kazu@hxi.com>
 445
 446         * alpha-dis.c: Fix formatting.
 447         * cris-dis.c: Likewise.
 448         * d10v-dis.c: Likewise.
 449         * d30v-dis.c: Likewise.
 450         * m10300-dis.c: Likewise.
 451         * tic54x-dis.c: Likewise.
 452
 453 2001-07-23  Kazu Hirata  <kazu@hxi.com>
 454
 455         * m68k-dis.c: Fix formatting.
 456         * pj-dis.c: Likewise.
 457         * s390-dis.c: Likewise.
 458         * z8k-dis.c: Likewise.
 459
 460 2001-07-21  Chris Demetriou  <cgd@broadcom.com>
 461
 462         * mips-opc.c (mips_builtin_opcodes): Sort c.le.s and c.lt.s
 463         into the rest of the surrounding definitions.
 464
 465 2001-07-18  Alan Modra  <amodra@bigpond.net.au>
 466
 467         * i386-dis.c (grps): Print l or w suffix, and require mem modrm
 468         for lgdt, lidt, sgdt, sidt.
 469
 470 2001-07-13  Philip Blundell  <philb@gnu.org>
 471
 472         * arm-dis.c (print_insn_arm): Use decimal for offsets in LDR/STR.
 473
 474 2001-07-12  Jeff Johnston  <jjohnstn@redhat.com>
 475
 476         * cgen-asm.in: Include "xregex.h" always to enable the libiberty
 477         regex support.
 478         (@arch@_cgen_build_insn_regex): New routine from Graydon.
 479         (@arch@_cgen_assemble_insn): Add Graydon's code to use regex
 480         to verify if it is worth parsing the insn as insn "x".  Also update
 481         error message when insn is not a recognized format of the insn vs
 482         when the insn is completely unrecognized.
 483
 484 2001-07-11  Frank Ch. Eigler  <fche@redhat.com>
 485
 486         * cgen-dis.in (print_insn): Use cgen_get_insn_value instead of
 487         bfd_get_bits.
 488         * cgen-opc.c (cgen_get_insn_value, cgen_put_insn_value): Respect
 489         non-zero CGEN_CPU_DESC->insn_chunk_bitsize.
 490
 491 2001-07-09  Andreas Jaeger  <aj@suse.de>, Karsten Keil <kkeil@suse.de>
 492
 493         * i386-dis.c (set_op): Handle 64 bit and 32 bit mode.
 494         (OP_J): Use bfd_vma for mask to work properly with 64 bits.
 495         (op_address,op_riprel): Use bfd_vma to handle 64 bits.
 496
 497 2001-07-05  Ben Elliston  <bje@redhat.com>
 498
 499         * Makefile.am (CPUDIR): Define.
 500         (stamp-m32r): Update dependencies.
 501         (stamp-fr30): Ditto.
 502         (stamp-openrisc): Ditto.
 503         * Makefile.in: Regenerate.
 504
 505 2001-07-03  Zoltan Hidvegi <hzoli@hzoli.2y.net>
 506
 507         * ppc-opc.c: Fix encoding of 'clf' instruction.
 508
 509 2001-06-30  Geoffrey Keating  <geoffk@redhat.com>
 510
 511         * cgen-ibld.in (insert_normal): Support CGEN_IFLD_SIGN_OPT.
 512
 513 2001-06-28  Geoffrey Keating  <geoffk@redhat.com>
 514
 515         * cgen-asm.c (cgen_parse_keyword): Allow any first character.
 516         * cgen-opc.c (cgen_keyword_add): Ignore special first
 517         character when building nonalpha_chars field.
 518
 519 2001-06-24  Ben Elliston  <bje@redhat.com>
 520
 521         * m88k-dis.c: Format to conform to GNU coding standards.
 522
 523 2001-06-23  Andreas Jaeger  <aj@suse.de>
 524
 525         * disassemble.c (disassembler_usage): Add unused attribute.
 526
 527 2001-06-22  Eric Christopher  <echristo@redhat.com>
 528
 529         * mips-opc.c: Move prefx to start of the table.
 530
 531 2001-06-22  Stacey Sheldon <ssheldon@Catena.com>
 532
 533         * arc-opc.c (insert_st_syntax): Fix over-optimisation of ST
 534         instruction.
 535
 536 2001-06-22  Pauli <pauli@moreton.com.au>
 537
 538         * m68k-opc.c: Add wdebug instruction.
 539
 540 2001-06-15  Aldy Hernandez  <aldyh@redhat.com>
 541
 542         * m10300-opc.c (mn10300_opcodes): Change opcode for AM33 subc.
 543
 544 2001-06-14  Geoffrey Keating  <geoffk@redhat.com>
 545
 546         * cgen-asm.c (cgen_parse_keyword): When looking for the
 547         boundaries of a keyword, allow any special characters
 548         that are actually in one of the allowed keyword.
 549         * cgen-opc.c (cgen_keyword_add): Add any special characters
 550         to the nonalpha_chars field.
 551
 552 2001-06-12  Martin Schwidefsky <schwidefsky@de.ibm.com>
 553
 554         * s390-opc.c: Add lgh instruction.
 555         * s390-opc.txt: Likewise.
 556
 557 2001-06-11  Alan Modra  <amodra@bigpond.net.au>
 558
 559         * i386-dis.c: Group function prototypes in one place.
 560         (FLOATCODE): Redefine as 1.
 561         (USE_GROUPS): Redefine as 2.
 562         (USE_PREFIX_USER_TABLE): Redefine as 3.
 563         (X86_64_SPECIAL): Define as 4.
 564         (GRP1b..GRPAMD): Move USE_GROUPS to bytecode1, index to bytecode2.
 565         (PREGRP0..PREGRP26): Similarly with USE_PREFIX_USER_TABLE.
 566         (dis386_att, dis386_intel, disx86_64_att, disx86_64_intel): Delete.
 567         (dis386): New table combining above four tables.
 568         (dis386_twobyte_att, dis386_twobyte_intel): Delete.
 569         (dis386_twobyte): New table combining above two tables.
 570         (x86_64_table): New table to handle x86_64.
 571         (X86_64_0): Define.
 572         (float_mem_att, float_mem_intel): Delet.
 573         (float_mem): New table combining above two tables.
 574         (print_insn_i386): Modify for above.
 575         (dofloat): Likewise.
 576         (putop): Handle '{', '|' and '}' to select alternative mnemonics.
 577         Return 0 on success, 1 if no valid alternative.
 578         (putop <case 'F'>, <case 'H'>): Print nothing for intel_syntax.
 579         (putop <case 'T'>): Move to case 'U', and share case 'Q' code.
 580         (putop <case 'I'>): Move to case 'T', and share case 'P' code.
 581         (OP_REG <case rAX_reg .. rDI_reg>): Handle as for eAX_reg .. eDI_reg
 582         if not 64-bit mode.
 583         (OP_I <case q_mode>): Handle as for v_mode if not 64-bit mode.
 584         (OP_I64): If not 64-bit mode, call OP_I.
 585         OP_OFF64): If not 64-bit mode, call OP_OFF.
 586         (OP_ST, OP_STi, OP_SEG, OP_DIR, OP_OFF, OP_OFF64, OP_MMX): Rename
 587         'ignore'/'ignored' to 'bytemode'.
 588
 589 2001-06-10  Alan Modra  <amodra@bigpond.net.au>
 590
 591         * configure.in: Sort 'ta' case statement.
 592         * configure: Regenerate.
 593
 594         * i386-dis.c (dis386_att): Add 'H' to conditional branch and
 595         loop,jcxz insns.
 596         (disx86_64_att): Likewise.
 597         (dis386_twobyte_att): Likewise.
 598         (print_insn_i386): Don't print branch hints as a prefix.
 599         (putop): 'H' macro prints branch hints.
 600         (get64): Kill compile warnings.
 601
 602 2001-06-09  Alexandre Oliva  <aoliva@redhat.com>
 603
 604         * sh-opc.h (sh_table): Don't use empty initializers.
 605
 606 2001-06-06  Christian Groessler <cpg@aladdin.de>
 607
 608         * z8k-dis.c: Fix formatting.
 609         (unpack_instr): Remove unused cases in switch statement. Add
 610         safety abort() in default case.
 611         (unparse_instr): Add safety abort() in default case.
 612
 613 2001-06-06  Peter Jakubek <pjak@snafu.de>
 614
 615         * m68k-dis.c (print_insn_m68k): Fix typo.
 616         * m68k-opc.c (m68k_opcodes): Correct allowed operands for
 617         mcf (ColdFire) div, rem and moveb instructions.
 618
 619 2001-06-06  Alan Modra  <amodra@bigpond.net.au>
 620
 621         * i386-dis.c (cond_jump_flag, loop_jcxz_flag): Define.
 622         (cond_jump_mode, loop_jcxz_mode): Define.
 623         (dis386_att): Add cond_jump_flag and loop_jcxz_flag as
 624         appropriate, and 'F' suffix to loop insns.
 625         (disx86_64_att): Likewise.
 626         (dis386_twobyte_att): Likewise.
 627         (print_insn_i386): Don't output addr prefix for loop, jcxz insns.
 628         Output data size prefix for long conditional jumps.  Output cs and
 629         ds branch hints.
 630         (putop): Handle 'F', and mark PREFIX_ADDR used for case 'E'.
 631         (OP_J): Don't make PREFIX_DATA used.
 632
 633 2001-06-04  Alexandre Oliva  <aoliva@redhat.com>
 634
 635         * sh-opc.h (sh_table): Complete last element entry to avoid
 636         compiler warning.
 637
 638 2001-05-16  Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
 639
 640         * mips-dis.c (mips_isa_type): Add MIPS r12k support.
 641
 642 2001-05-23  Alan Modra  <amodra@one.net.au>
 643
 644         * arc-opc.c: Whitespace changes.
 645
 646 2001-05-18  Hans-Peter Nilsson  <hp@axis.com>
 647
 648         * cris-opc.c (cris_spec_regs): Add missing initializer field for
 649         last element.
 650
 651 2001-05-15  Frank Ch. Eigler  <fche@redhat.com>
 652
 653         * cgen-dis.in (extract_normal): Complete support for min<base case.
 654
 655 2001-05-15  Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
 656
 657         * mips-dis.c (INSNLEN): Rename MAXLEN.
 658         (std_reg_names): Replace by mips32_reg_names and mips64_reg_names.
 659         (print_insn_arg): Remove $ prefix of register names.
 660         (set_mips_isa_type): Remove.
 661         (mips_isa_type): New function.
 662         (get_mips_isa): New Function.
 663         (print_insn_mips): Rename _print_insn_mips.
 664         (_print_insn_mips): New function, contains code which was
 665         duplicated in print_insn_big_mips and print_insn_little_mips.
 666         (print_insn_big_mips): Moved code to _print_insn_mips.
 667         (print_insn_little_mips): Likewise.
 668         (print_mips16_insn_arg): Remove $ prefix of register names.
 669         Print error message before abort.
 670
 671 2001-05-14  J.T. Conklin  <jtc@redback.com>
 672
 673         * ppc-opc.c (powerpc_opcodes): Fixed extended opcode field of
 674         simplified mnemonics used for setting PPC750-specific special
 675         purpose registers.
 676
 677 2001-05-12  H.J. Lu  <hjl@gnu.org>
 678
 679         * i386-dis.c (print_insn_i386): Always set `mod', `reg' and
 680         `rm'.
 681
 682 2001-05-12  Peter Targett  <peter.targett@arccores.com>
 683
 684         * arc-opc.c (arc_reg_names): Correct attribute for lp_count
 685         register to r/w.  Formatting fixes throughout file.
 686
 687 2001-05-12  Alan Modra  <amodra@one.net.au>
 688
 689         * i386-dis.c (prefix_user_table): Correct movq2dq, movdq2q, and
 690         movq operands.
 691         (twobyte_has_modrm): Update table.
 692         (need_modrm): Give it file scope.
 693         (MODRM_CHECK): Define.
 694         (dofloat): Use MODRM_CHECK.
 695         (OP_E): Likewise.
 696         (OP_EM): Likewise.
 697         (OP_EX): Likewise.
 698
 699 2001-05-07  Frank Ch. Eigler  <fche@redhat.com>
 700
 701         * cgen-dis.in (default_print_insn): Tolerate min<base instructions
 702         even at end of a section.
 703         * cgen-ibld.in (extract_normal): Tolerate min!=base!=max instructions
 704         by ignoring precariously-unpacked insn_value in favor of raw buffer.
 705
 706 2001-05-03  Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
 707
 708         * disassemble.c (disassembler_usage): Remove unused attribute.
 709
 710 2001-05-04  Frank Ch. Eigler  <fche@redhat.com>
 711
 712         * m32r-dis.c, -asm.c, -ibld.c: Regenerated with disassembler fixes.
 713
 714 2001-05-04  Frank Ch. Eigler  <fche@redhat.com>
 715
 716         * cgen-dis.in (print_insn): Remove call to read_insn.  Instead,
 717         assume incoming buffer already has the base insn loaded.  Handle
 718         smaller-than-base instructions for variable-length case.
 719
 720 2001-05-04  Alan Modra  <amodra@one.net.au>
 721
 722         * i386-dis.c (Ev, Ed): Remove duplicate define.
 723         (Gd): Define.
 724         (XS): Define.
 725         (OP_XS): New function.
 726         (dis386_twobyte_att): Correct pinsrw, pextrw, pmovmskb, and
 727         movmskp operands.
 728         (dis386_twobyte_intel): Likewise.
 729         (prefix_user_table): Use MS for maskmovq operand.
 730
 731 2001-04-27  Johan Rydberg  <jrydberg@opencores.org>
 732
 733         * Makefile.am: Add OpenRISC target.
 734         * Makefile.in: Regenerated.
 735
 736         * disassemble.c (disassembler): Recognize the OpenRISC disassembly.
 737
 738         * configure.in (bfd_openrisc_arch): Add target.
 739         * configure: Regenerated.
 740
 741         * openrisc-asm.c: New file.
 742         * openrisc-desc.c: Likewise.
 743         * openrisc-desc.h: Likewise.
 744         * openrisc-dis.c: Likewise.
 745         * openrisc-ibld.c: Likewise.
 746         * openrisc-opc.c: Likewise.
 747         * openrisc-opc.h: Likewise.
 748
 749 2001-04-24  Christian Groessler  <cpg@aladdin.de>
 750
 751         * z8k-dis.c: add names of control registers (ctrl_names);
 752         (seg_length): provides instruction length fixup for segmented
 753         mode; (unpack_instr): correctly handle ARG_DISP16, ARG_DISP12,
 754         CLASS_0DISP7, CLASS_1DISP7, CLASS_DISP8 and CLASS_PR cases;
 755         (unparse_intr): handle CLASS_PR, print addresses without '#'
 756         * z8k-opc.h: re-created with new z8kgen
 757         * z8kgen.c: merged in fixes which were in existing z8k-opc.h; new
 758         entries for ldctl/ldctlb instruction
 759
 760 2001-04-06  Andreas Jaeger  <aj@suse.de>
 761
 762         * i386-dis.c: Add ffreep instruction.
 763
 764 2001-03-30  Alexandre Oliva  <aoliva@redhat.com>
 765
 766         * ppc-opc.c (insert_mbe): Shift mask initializer as long.
 767
 768 2001-03-24  Alan Modra  <alan@linuxcare.com.au>
 769
 770         * i386-dis.c (PREGRP25): Define.
 771         (dis386_twobyte_att): Use here in place of "movntq" entry.
 772         (dis386_twobyte_intel): Likewise.
 773         (prefix_user_table): Add PREGRP25 entry for "movntq" and "movntdq".
 774         (PREGRP26): Define.
 775         (dis386_twobyte_att): Use here.
 776         (dis386_twobyte_intel): Likewise.
 777         (prefix_user_table): Add PREGRP26 entry for "punpcklqdq".
 778         (prefix_user_table <maskmovdqu>): XM operand, not MX.
 779         (prefix_user_table): Cosmetic changes to "bad" entries.
 780
 781 2001-03-23  Nick Clifton  <nickc@redhat.com>
 782
 783         * mips-opc.c: Remove extraneous whitespace.
 784         * mips-dis.c: Remove extraneous whitespace.
 785
 786 2001-03-22  Ben Elliston  <bje@redhat.com>
 787
 788         * cgen-asm.in (@arch@_cgen_assemble_insn): Move tmp_errmsg
 789         declaration inside CGEN_VERBOSE_ASSEMBLER_ERRORS conditional.
 790         * cgen-ibld.in (put_insn_int_value): Mark cd parameter as unused
 791         to allay a compiler warning.
 792
 793 2001-03-22  Alan Modra  <alan@linuxcare.com.au>
 794
 795         * i386-dis.c (dis386_twobyte_att): Add entries for paddq, psubq.
 796         (dis386_twobyte_intel): Likewise.
 797         (twobyte_has_modrm): Set entry for paddq, psubq.
 798
 799 2001-03-20  Patrick Macdonald  <patrickm@redhat.com>
 800
 801         * cgen-dis.in (print_insn_@arch@): Add support for target machine
 802         determination via CGEN_COMPUTE_MACH.
 803         * fr30-desc.c: Regenerate.
 804         * fr30-dis.c: Regenerate.
 805         * fr30-opc.h: Regenerate.
 806         * m32r-desc.c: Regenerate.
 807         * m32r-dis.c: Regenerate.
 808         * m32r-opc.h: Regenerate.
 809         * m32r-opinst.c: Regenerate.
 810
 811 2001-03-20  H.J. Lu  <hjl@gnu.org>
 812
 813         * configure.in: Remove the redundent AC_ARG_PROGRAM.
 814         * configure: Rebuild.
 815
 816 2001-03-19  Jim Wilson  <wilson@redhat.com>
 817
 818         * ia64-gen.c (fetch_insn_class): If xsect, then ignore comment and
 819         notestr if larger than xsect.
 820         (in_class): Handle format M5.
 821         * ia64-asmtab.c: Regnerate.
 822
 823 2001-03-19  John David Anglin  <dave@hiauly1.hia.nrc.ca>
 824
 825         * vax-dis.c (print_insn_vax): Only fetch two bytes if the info buffer
 826         has more than one byte left to read.
 827
 828 2001-03-16  Martin Schwidefsky  <schwidefsky@de.ibm.com>
 829
 830         * s390-opc.c: Add new opcodes.  Smooth out formatting.
 831         * s390-opc.txt: Add new opcodes.
 832
 833 2001-03-06  Nick Clifton  <nickc@redhat.com>
 834
 835         * arm-dis.c (print_insn_thumb): Compute destination address
 836         of BLX(1) instruction by taking bit 1 from PC and not from bit
 837         0 of the offset.
 838
 839 2001-03-06  Igor Shevlyakov  <igor@windriver.com>
 840
 841         * m68k-dis.c (print_insn_m68k): Recognize Coldfire CPUs
 842         so command line switches will work.
 843
 844 2001-03-05  Dave Brolley  <brolley@redhat.com>
 845
 846         * fr30-asm.c: Regenerate.
 847         * fr30-desc.c: Regenerate.
 848         * fr30-desc.h: Regenerate.
 849         * fr30-dis.c: Regenerate.
 850         * fr30-ibld.c: Regenerate.
 851         * fr30-opc.c: Regenerate.
 852         * fr30-opc.h: Regenerate.
 853         * m32r-asm.c: Regenerate.
 854         * m32r-desc.c: Regenerate.
 855         * m32r-desc.h: Regenerate.
 856         * m32r-dis.c: Regenerate.
 857         * m32r-ibld.c: Regenerate.
 858         * m32r-opc.c: Regenerate.
 859         * m32r-opc.h: Regenerate.
 860         * m32r-opinst.c: Regenerate.
 861
 862 2001-02-28  Igor Shevlyakov  <igor@windriver.com>
 863
 864         * m68k-opc.c: fix cpushl according to Motorola. Enable
 865         bunch of instructions for Coldfire 5407 and add all new.
 866
 867 2001-02-27  Alan Modra  <alan@linuxcare.com.au>
 868
 869         * configure.in (BFD_VERSION): Do without grep.
 870         * configure: Regenerate.
 871         * Makefile.am: Run "make dep-am".
 872         * Makefile.in: Regenerate.
 873
 874 2001-02-23  David Mosberger  <davidm@hpl.hp.com>
 875
 876         * ia64-opc-a.c: Add missing pseudo-ops for "cmp" and "cmp4".
 877         * ia64-asmtab.c: Regenerate.
 878
 879 2001-02-21  David Mosberger  <davidm@hpl.hp.com>
 880
 881         * ia64-opc-d.c (ia64_opcodes_d): Break the "add" pattern into two
 882         separate variants: one for IMM22 and the other for IMM14.
 883         * ia64-asmtab.c: Regenerate.
 884
 885 2001-02-21  Greg McGary  <greg@mcgary.org>
 886
 887         * cgen-opc.c (cgen_get_insn_value): Add missing `return'.
 888
 889 2001-02-20  H.J. Lu  <hjl@gnu.org>
 890
 891         * Makefile.am (ia64-ic.tbl): Remove the target.
 892         (ia64-raw.tbl): Likewise.
 893         (ia64-waw.tbl): Likewise.
 894         (ia64-war.tbl): Likewise.
 895         (ia64-asmtab.c): Generate it in the source directory.
 896         * Makefile.in: Regenerated.
 897
 898 2001-02-18  lars brinkhoff  <lars@nocrew.org>
 899
 900         * Makefile.am: Add PDP-11 target.
 901         * configure.in: Likewise.
 902         * disassemble.c: Likewise.
 903         * pdp11-dis.c: New file.
 904         * pdp11-opc.c: New file.
 905
 906 2001-02-14  Jim Wilson  <wilson@redhat.com>
 907
 908         * ia64-ic.tbl: Update from Intel.  Add setf to fr-writers.
 909         * ia64-asmtab.c: Regenerate.
 910
 911 Mon Feb 12 17:41:26 CET 2001  Jan Hubicka  <jh@suse.cz>
 912
 913         * i386-dis.c (prefix_user_t): Add 'Y' to SSE ineger converison
 914         instructions.
 915         (putop): Handle 'Y'
 916
 917 2001-02-11  Maciej W. Rozycki  <macro@ds2.pg.gda.pl>
 918
 919         * mips-dis.c (print_insn_arg): Use top four bits of the address of
 920         the following instruction not of the jump itself for the jump
 921         target.
 922         (print_mips16_insn_arg): Likewise.
 923
 924 2001-02-11  Michael Sokolov  <msokolov@ivan.Harhan.ORG>
 925
 926         * Makefile.am (stamp-lib): ranlib the libopcodes.a in the build
 927         directory.
 928         * Makefile.in: Regenerate.
 929
 930 2001-02-09  Schwidefsky  <schwidefsky@de.ibm.com>
 931
 932         * Makefile.am: Add linux target for S/390.
 933         * Makefile.in: Likewise.
 934         * configure.in: Likewise.
 935         * disassemble.c: Likewise.
 936         * s390-dis.c: New file.
 937         * s390-mkopc.c: New file.
 938         * s390-opc.c: New file.
 939         * s390-opc.txt: New file.
 940
 941 2001-02-05  Jim Wilson  <wilson@redhat.com>
 942
 943         * ia64-asmtab.c: Revert 2000-12-16 change.
 944
 945 2001-02-02  Patrick Macdonald  <patrickm@redhat.com>
 946
 947         * fr30-desc.h: Regenerate with CGEN_MAX_SYNTAX_ELEMENTS.
 948         * m32r-desc.h: Regenerate.
 949
 950 Thu Feb  1 16:29:06 MET 2001  Jan Hubicka  <jh@suse.cz>
 951
 952         * i386-dis.c (dis386_att, grps): Use 'T' for push/pop
 953         (putop): Handle 'T', alphabetize order, fix 'I' handling in Intel syntax
 954
 955 2001-01-14  Alan Modra  <alan@linuxcare.com.au>
 956
 957         * hppa-dis.c (print_insn_hppa): Handle '>' and '<' arg types.
 958
 959 2001-01-13  Nick Clifton  <nickc@redhat.com>
 960
 961         * disassemble.c: Remove spurious white space.
 962
 963 Sat Jan 13 01:48:24 MET 2001  Jan Hubicka  <jh@suse.cz>
 964
 965         * i386-dis.c (dis386_att, disx86_64_att): Fix ret, lret and iret
 966         templates.
 967
 968 2001-01-11  Peter Targett  <peter.targett@arccores.com>
 969
 970         * configure.in: Add arc-ext.lo for bfd_arc_arch selection.
 971         * Makefile.am (C_FILES): Add arc-ext.c.
 972         (ALL_MACHINES) Add arc-ext.lo.
 973         (INCLUDES) Add opcode directory to list.
 974         New dependency entry for arc-ext.lo.
 975         * disassemble.c (disassembler): Correct call to
 976         arc_get_disassembler.
 977         * arc-opc.c: New update for ARC, including full base
 978         instructions for ARC variants.
 979         * arc-dis.h, arc-dis.c: New update for ARC, including
 980         extensibility functionality.
 981         * arc-ext.h, arc-ext.c: New files for handling extensibility.
 982
 983 2001-01-10  Jan Hubicka  <jh@suse.cz>
 984
 985         * i386-dis.c (PREGRP15 - PREGRP24): New.
 986         (dis386_twobyt): Add SSE2 instructions.
 987         (twobyte_uses_SSE_prefix: Rename from ... ; add new SSE instructions.
 988         (twobyte_uses_f3_prefix): ... this one.
 989         (grps): Add SSE instructions.
 990         (prefix_user_table): Add two new slots; add SSE2 instructions.
 991         (print_insn_i386): Rename uses_f3_prefix to uses_SSE_prefix;
 992         Handle the REPNZ and Data16 prefixes as well; do proper lookup
 993         to prefix_user_table.
 994         (OP_E): Accept mfence and lfence as well.
 995         (OP_MMX): Data16 prefix turns MMX to SSE; support REX extensions.
 996         (OP_XMM): Support REX extensions.
 997         (OP_EM): Likewise.
 998         (OP_EX): Likewise.
 999
1000 2001-01-09  Nick Clifton  <nickc@redhat.com>
1001
1002         * arm-dis.c (print_insn): Set pc to zero for instructions with
1003         a reloc associated with them.
1004
1005 2001-01-09  Jeff Johnston  <jjohnstn@redhat.com>
1006
1007         * cgen-asm.in (parse_insn_normal): Changed syn to be
1008         CGEN_SYNTAX_CHAR_TYPE.  Changed all references to *syn
1009         as character to use CGEN_SYNTAX_CHAR macro and all comparisons
1010         to '\0' to use 0 instead.
1011         * cgen-dis.in (print_insn_normal): Ditto.
1012         * cgen-ibld.in (insert_insn_normal, extract_insn_normal): Ditto.
1013
1014 2001-01-05  Jan Hubicka  <jh@suse.cz>
1015
1016         * i386-dis.c: Add x86_64 support.
1017         (rex): New static variable.
1018         (REX_MODE64, REX_EXTX, REX_EXTY, REX_EXTZ): New constants.
1019         (USED_REX): New macro.
1020         (Ev, Ed, Rm, Iq, Iv64, Cm, Dm, Rm*, Ob64, Ov64): New macros.
1021         (OP_I64, OP_OFF64, OP_IMREG): New functions.
1022         (OP_REG, OP_OFF): Declare.
1023         (get64, get32, get32s): New functions.
1024         (r??_reg): New constants.
1025         (dis386_att): Change templates of instruction implicitly promoted
1026         to 64bit; change e?? to RMe?? for unwind RM byte instructions.
1027         (grps): Likewise.
1028         (dis386_intel): Likewise.
1029         (dixx86_64_att): New table based on dis386_att.
1030         (dixx86_64_intel): New table based on dis386_intel.
1031         (names64, names8rex): New global variable.
1032         (names32, names16): Add extended registers.
1033         (prefix_user_t): Recognize rex prefixes.
1034         (prefix_name): Print REX prefixes nicely.
1035         (op_riprel): New global variable.
1036         (start_pc): Set type to bfd_vma.
1037         (print_insn_i386): Detect the 64bit mode and use proper table;
1038         move ckprefix after initializing the buffer; output unused rex prefixes;
1039         output information about target of RIP relative addresses.
1040         (putop): Support 'O' and 'I'. Update handling of "P', 'Q', 'R' and 'S';
1041         (print_operand_value): New function.
1042         (OP_E, OP_G, OP_REG, OP_I, OP_J, OP_DIR, OP_OFF, OP_D): Add support for
1043         REX prefix and new modes.
1044         (get64, get32s): New.
1045         (get32): Return bfd_signed_vma type.
1046         (set_op): Initialize the op_riprel.
1047         * disassemble.c (disassembler): Recognize the x86-64 disassembly.
1048
1049 2001-01-03  Richard Sandiford  <r.sandiford@redhat.com>
1050
1051          cgen-dis.in (read_insn): Use bfd_get_bits()
1052
1053 2001-01-02  Richard Sandiford  <rsandifo@redhat.com>
1054
1055         * cgen-dis.c (hash_insn_array): Use bfd_put_bits().
1056         (hash_insn_list): Likewise
1057         * cgen-ibld.in (insert_1): Use bfd_put_bits() and bfd_get_bits().
1058         (extract_1): Use bfd_get_bits().
1059         (extract_normal): Apply sign extension to both extraction
1060         methods.
1061         * cgen-opc.c (cgen_get_insn_value): Use bfd_get_bits()
1062         (cgen_put_insn_value): Use bfd_put_bits()
1063
1064 2000-12-28  Frank Ch. Eigler  <fche@redhat.com>
1065
1066         * cgen-asm.in (parse_insn_normal): Print better error message for
1067         instructions with missing operands.
1068
1069 2000-12-21  Santeri Paavolainen <santtu@ssh.com>
1070
1071         * cgen-opc.c: Include alloca.h if HAVE_ALLOCA_H is defined.
1072
1073 2000-12-16  Nick Clifton  <nickc@redhat.com>
1074
1075         * Makefile.in: Regenerate.
1076         * aclocal.m4: Regenerate.
1077         * config.in: Regenerate.
1078         * configure.in: Add spacing.
1079         * configure: Regenerate.
1080         * ia64-asmtab.c: Regenerate.
1081         * po/opcodes.pot: Regenerate.
1082
1083 2000-12-12  Frank Ch. Eigler  <fche@redhat.com>
1084
1085         * cgen-asm.in (@arch@_cgen_assemble_insn): Prefer printing insert-time
1086         error messages over later parse-time ones.
1087
1088 2000-12-12  Jim Wilson  <wilson@redhat.com>
1089
1090         * ia64-dis.c (print_insn_ia64): Cast away const on ia64_free_opcode
1091         argument.
1092         * ia64-gen.c (insert_deplist): Cast sizeof result to int.
1093         (print_dependency_table): Print NULL if semantics field not set.
1094         (insert_opcode_dependencies): Mark cmp parameter as unused.
1095         (print_main_table): Use fprintf_vma to print long long fields.
1096         (main): Mark argv paramter as unused.  Convert to old style definition.
1097         * ia64-opc.c (ia64_find_dependency): Cast sizeof result to int.
1098         * ia64-asmtab.c: Regnerate.
1099
1100 2000-12-09  Nick Clifton  <nickc@redhat.com>
1101
1102         * m32r-dis.c (print_insn): Prevent re-read of instruction from
1103         wrong address.
1104
1105         * fr30-dis.c: Regenerate.
1106
1107 2000-12-08  Peter Targett  <peter.targett@arccores.com>
1108
1109         * configure.in: Add arc-ext.lo for bfd_arc_arch selection.
1110         * Makefile.am (C_FILES): Add arc-ext.c.
1111         (ALL_MACHINES) Add arc-ext.lo.
1112         (INCLUDES) Add opcode directory to list.
1113         New dependency entry for arc-ext.lo.
1114         * disassemble.c (disassembler): Correct call to
1115         arc_get_disassembler.
1116         * arc-opc.c: New update for ARC, including full base
1117         instructions for ARC variants.
1118         * arc-dis.h, arc-dis.c: New update for ARC, including
1119         extensibility functionality.
1120         * arc-ext.h, arc-ext.c: New files for handling extensibility.
1121
1122 2000-12-03  Chris Demetriou   cgd@sibyte.com
1123
1124         * mips-opc.c (mips_builtin_opcodes): Use the WR_HILO, RD_HILO,
1125         MOD_HILO, and MOD_LO macros.
1126
1127         * mips-opc.c (M1, M2): Delete.
1128         (mips_builtin_opcodes): Remove all uses of M1.
1129
1130         * mips-opc.c (mips_builtin_opcodes): Make the dmfc2 and dmtc2
1131         instructions take "G" format second operands and use the
1132         correct flags.
1133         There are mfc3 and mtc3 opcodes, so add dmfc3 and dmtc3 opcodes to
1134         match.
1135         Delete "sel" code operands from mfc1 and mtc1.
1136         Add MIPS64 opcode changes (dclo, dclz), and "sel" code variants
1137         for dm[ft]c[023].
1138
1139 2000-12-03  Ed Satterthwaite  ehs@sibyte.com  and
1140             Chris Demetriou   cgd@sibyte.com
1141
1142         * mips-opc.c (mips_builtin_opcodes): Finish additions
1143         for MIPS32 support, and clean up existing entries for
1144         aesthetics, consistency with the MIPS32 ISA, and
1145         with consistency the rest of the table.
1146
1147 2000-12-01  Nick Clifton  <nickc@redhat.com>
1148
1149         * mips16-opc.c (mips16_opcodes): Add initialiser for membership
1150         field.
1151
1152 2000-12-01  Chris Demetriou <cgd@sibyte.com>
1153
1154         mips-dis.c (print_insn_arg): Handle new 'U' and 'J' argument
1155         specifiers.  Update 'B' for new constant names, and remove
1156         'm'.
1157         mips-opc.c (mips_builtin_opcodes): Place "pref" and "ssnop"
1158         near the top of the array, so they are disassembled properly.
1159         Enable "ssnop" for MIPS32.  Add "break" variant with 20 bit
1160         code for MIPS32.  Update "clo" and "clz" to use 'U' operand
1161         specifier.  Add 'H' format specifier variants for "mfc1,"
1162         "mfc2," "mfc3," "mtc1," "mtc2," and "mtc3" for MIPS32.  Update
1163         MIPS32 "sdbbp" to use 'B' operand specifier.  Add MIPS32
1164         "wait" variant which uses 'J' operand specifier.
1165
1166         * mips-dis.c (set_mips_isa_type): Update to use
1167         CPU_UNKNOWN and ISA_* constants.  Add bfd_mach_mips32 case.
1168         Replace bfd_mach_mips4K with bfd_mach_mips32_4k case.
1169         * mips-opc.c (I32): New constant for instructions added in
1170         MIPS32.
1171         (P4): Delete.
1172         (mips_builtin_opcodes) Replace all uses of P4 with I32.
1173
1174         * mips-dis.c (set_mips_isa_type): Add cases for
1175         bfd_mach_mips5 and bfd_mach_mips64.
1176         * mips-opc.c (I64): New definitions.
1177
1178         * mips-dis.c (set_mips_isa_type): Add case for
1179         bfd_mach_mips_sb1.
1180
1181 2000-11-28  Hans-Peter Nilsson  <hp@bitrange.com>
1182
1183         * sh-dis.c (print_insn_ddt): Make insn_x, insn_y unsigned.
1184         (print_insn_ppi): Make nib1, nib2, nib3 unsigned.
1185         Initialize variable dc to NULL.
1186         (print_insn_shx): Remove unused label d_reg_n.
1187
1188 2000-11-24  Nick Clifton  <nickc@redhat.com>
1189
1190         * arm-opc.h: Add new opcode formatting parameter 'B'.
1191         (arm_opcodes): Add XScale, v5, and v5te instructions.
1192         (thumb_opcodes): Add v5t instructions.
1193
1194         * arm-dis.c (print_insn_arm): Handle new 'B' format
1195         parameter.
1196         (print_insn_thumb): Decode BLX(1) instruction.
1197
1198 2000-11-21  Chris Demetriou  <cgd@sibyte.com>
1199
1200         * mips-opc.c: Fix file header comment.
1201
1202 2000-11-14  Hans-Peter Nilsson  <hp@axis.com>
1203
1204         * cris-dis.c (cris_get_disassembler): If abfd is NULL, return
1205         print_insn_cris_with_register_prefix.
1206
1207 2000-11-11  Alexandre Oliva  <aoliva@redhat.com>
1208
1209         * sh-opc.h: The operand of `mov.w r0, (<disp>,GBR)' is IMM1, not 0.
1210
1211 2000-11-07  Matthew Green  <mrg@redhat.com>
1212
1213         * cgen-dis.in (print_insn): All insns which can fit into insn_value
1214         must be loaded there in their entirety.
1215
1216 2000-10-20  Jakub Jelinek  <jakub@redhat.com>
1217
1218         * sparc-dis.c (v9a_asr_reg_names): Add v9b ASRs.
1219         (compute_arch_mask): Add v8plusb and v9b machines.
1220         (print_insn_sparc): siam mode decoding, accept ASRs up to 25.
1221         * sparc-opc.c: Support for Cheetah instruction set.
1222         (prefetch_table): Add #invalidate.
1223
1224 2000-10-16  Nick Clifton  <nickc@redhat.com>
1225
1226         * mcore-dis.c (imsk): Change mask for OC to 0xFE00.
1227
1228 2000-10-06  Dave Brolley  <brolley@redhat.com>
1229
1230         * fr30-desc.h: Regenerate.
1231         * m32r-desc.h: Regenerate.
1232         * m32r-ibld.c: Regenerate.
1233
1234 2000-10-05  Jim Wilson  <wilson@redhat.com>
1235
1236         * ia64-ic.tbl: Update from Intel.
1237         * ia64-asmtab.c: Regenerate.
1238
1239 2000-10-04  Kazu Hirata  <kazu@hxi.com>
1240
1241         * ia64-gen.c: Convert C++-style comments to C-style comments.
1242         * tic54x-dis.c: Likewise.
1243
1244 2000-09-29  Hans-Peter Nilsson  <hp@axis.com>
1245
1246         Changes to add dollar prefix to registers for files where user symbols
1247         don't have a leading underscore.  Fix formatting.
1248         * cris-dis.c (REGISTER_PREFIX_CHAR): New.
1249         (format_reg): Add parameter with_reg_prefix.  All callers changed.
1250         (print_with_operands): Ditto.
1251         (print_insn_cris_generic): Renamed from print_insn_cris, add
1252         parameter with_reg_prefix.
1253         (print_insn_cris_with_register_prefix,
1254         print_insn_cris_without_register_prefix, cris_get_disassembler):
1255         New.
1256         * disassemble.c (disassembler) [ARCH_cris]: Call cris_get_disassembler.
1257
1258 2000-09-22  Jim Wilson  <wilson@redhat.com>
1259
1260         * ia64-opc-f.c (ia64_opcodes_f): Add fpcmp pseudo-ops for
1261         gt, ge, ngt, and nge.
1262         * ia64-asmtab.c: Regenerate.
1263
1264         * ia64-dis.c (print_insn_ia64): Revert Aug 7 byte skip count change.
1265         * ia64-gen.c (parse_semantics): Handle IA64_DVS_STOP.
1266         (lookup_specifier): Handle "PR%, 1 to 15" and "PR%, 16 to 62".
1267         * ia64-ic.tbl, ia64-raw.tbl, ia64-war.tbl, ia64-waw.tbl: Update.
1268         * ia64-asmtab.c: Regnerate.
1269
1270 2000-09-13  Anders Norlander  <anorland@acc.umu.se>
1271
1272         * mips-opc.c (mips_builtin_opcodes): Support cache instruction on 4K cores.
1273         Add mfc0 and mtc0 with sub-selection values.
1274         Add clo and clz opcodes.
1275         Add msub and msubu instructions for MIPS32.
1276         Add madd/maddu aliases for mad/madu for MIPS32.
1277         Support wait, deret, eret, movn, pref for MIPS32.
1278         Support tlbp, tlbr, tlbwi, tlbwr.
1279         (P4): New define.
1280
1281         * mips-dis.c (print_insn_arg): Print sdbbp 'm' args.
1282         (print_insn_arg): Handle 'H' args.
1283         (set_mips_isa_type): Recognize 4K.
1284         Use CPU_* defines instead of hardcoded numbers.
1285
1286 2000-09-11  Catherine Moore <clm@redhat.com>
1287
1288         * d30v-opc.c (d30v_operand_t): New operand type Rb2.
1289         (d30v_format_tab): Use Rb2 for modinc and moddec.
1290
1291 2000-09-07  Catherine Moore  <clm@redhat.com>
1292
1293         * d30v-opc.c (d30v_format_tab): Use format Ra for
1294         modinc and moddec.
1295
1296 2000-09-06  Alexandre Oliva  <aoliva@redhat.com>
1297
1298         * configure: Rebuilt with new libtool.m4.
1299
1300 2000-09-05  Nick Clifton  <nickc@redhat.com>
1301
1302         * configure: Regenerate.
1303         * po/opcodes.pot: Regenerate.
1304
1305 2000-08-31  Alexandre Oliva  <aoliva@redhat.com>
1306
1307         * acinclude.m4: Include libtool and gettext macros from the
1308         top level.
1309         * aclocal.m4, configure: Rebuilt.
1310
1311 2000-08-30  Kazu Hirata  <kazu@hxi.com>
1312
1313         * tic80-dis.c: Fix formatting.
1314
1315 2000-08-29  Kazu Hirata  <kazu@hxi.com>
1316
1317         * w65-dis.c: Fix formatting.
1318
1319 2000-08-28  Mark Hatle  <mhatle@mvista.com>
1320
1321         * ppc-opc.c: Add XTLB macro for a few PPC 4xx extended mnemonics.
1322         (powerpc_opcodes): Add table entries for PPC 405 instructions.
1323         Changed rfci, icbt, mfdcr, dccci, mtdcr, iccci from PPC to PPC403
1324         instructions.  Added extended mnemonic mftbl as defined in the
1325         405GP manual for all PPCs.
1326
1327 2000-08-28  Jim Wilson  <wilson@redhat.com>
1328
1329         * ia64-dis.c (print_insn_ia64): Add failed label after ia64_free_opcode
1330         call.  Change last goto to use failed instead of done.
1331
1332 2000-08-28  Dave Brolley  <brolley@redhat.com>
1333
1334         * cgen-ibld.in (cgen_put_insn_int_value): New function.
1335         (insert_normal): Allow for non-zero word_offset with CGEN_INT_INSN_P.
1336         (insert_insn_normal): Use cgen_put_insn_int_value with CGEN_INT_INSN_P.
1337         (extract_normal): Allow for non-zero word_offset with CGEN_INT_INSN_P.
1338         * cgen-dis.in (read_insn): New static function.
1339         (print_insn): Use read_insn to read the insn into the buffer and set
1340         up for disassembly.
1341         (print_insn): in CGEN_INT_INSN_P, make sure that the entire insn is
1342         in the buffer.
1343         * fr30-asm.c: Regenerated.
1344         * fr30-desc.c: Regenerated.
1345         * fr30-desc.h: Regenerated.
1346         * fr30-dis.c: Regenerated.
1347         * fr30-ibld.c: Regenerated.
1348         * fr30-opc.c: Regenerated.
1349         * fr30-opc.h: Regenerated.
1350         * m32r-asm.c: Regenerated.
1351         * m32r-desc.c: Regenerated.
1352         * m32r-desc.h: Regenerated.
1353         * m32r-dis.c: Regenerated.
1354         * m32r-ibld.c: Regenerated.
1355         * m32r-opc.c: Regenerated.
1356
1357 2000-08-28  Kazu Hirata  <kazu@hxi.com>
1358
1359         * tic30-dis.c: Fix formatting.
1360
1361 2000-08-27  Kazu Hirata  <kazu@hxi.com>
1362
1363         * sh-dis.c: Fix formatting.
1364
1365 2000-08-24  David Edelsohn  <dje@watson.ibm.com>
1366
1367         * ppc-opc.c (powerpc_opcodes): Add rfid, mtsrd, mtsrdin, mtmsrd.
1368
1369 2000-08-24  Kazu Hirata  <kazu@hxi.com>
1370
1371         * z8k-dis.c: Fix formatting.
1372
1373 2000-08-16  Jim Wilson  <wilson@redhat.com>
1374
1375         * ia64-ic.tbl (pr-readers-nobr-nomovpr): Add addl, adds.  Delete
1376         break, mov-immediate, nop.
1377         * ia64-opc-f.c: Delete fpsub instructions.
1378         * ia64-opc-m.c: Add POSTINC to all instructions with postincrement
1379         address operand.  Rewrite using macros to avoid long lines.
1380         * ia64-opc.h (POSTINC): Define.
1381         * ia64-asmtab.c: Regenerate.
1382
1383 2000-08-15  Jim Wilson  <wilson@redhat.com>
1384
1385         * ia64-ic.tbl: Add missing entries.
1386
1387 2000-08-08  Jason Eckhardt  <jle@redhat.com>
1388
1389         * i860-dis.c (print_br_address): Change third argument from int
1390         to long.
1391
1392 2000-08-07  Richard Henderson  <rth@redhat.com>
1393
1394         * ia64-dis.c (print_insn_ia64): Get byte skip count correct
1395         for MLI templates.  Handle IA64_OPND_TGT64.
1396
1397 2000-08-04  Ben Elliston  <bje@redhat.com>
1398
1399         * cgen-dis.in, cgen-asm.in, cgen-ibld.in: New files.
1400         * cgen.sh: Likewise.
1401
1402 2000-08-02  Jim Wilson  <wilson@redhat.com>
1403
1404         * ia64-dis.c (print_insn_ia64): Call ia64_free_opcode at end.
1405
1406 2000-07-29  Marek Michalkiewicz  <marekm@linux.org.pl>
1407
1408         * avr-dis.c (avr_operand): Use PARAMS macro in declaration.
1409         Change return type from void to int.  Check the combination
1410         of operands, return 1 if valid.  Fix to avoid BUF overflow.
1411         Report undefined combinations of operands in COMMENT.
1412         Report internal errors to stderr.  Output the adiw/sbiw
1413         constant operand in both decimal and hex.
1414         (print_insn_avr): Disassemble ldd/std with displacement of 0
1415         as ld/st.  Check avr_operand () return value, handle invalid
1416         combinations of operands like unknown opcodes.
1417
1418 2000-07-28  Ben Elliston  <bje@redhat.com>
1419
1420         * Makefile.am (CGEN, CGENDEPS, CGENDIR, CGENFLAGS): New.
1421         (run-cgen, stamp-m32r, stamp-fr30): New targets.
1422         * Makefile.in: Regenerate.
1423         * configure.in: Add --enable-cgen-maint option.
1424         * configure: Regenerate.
1425
1426 2000-07-26  Dave Brolley  <brolley@redhat.com>
1427
1428         * cgen-opc.c (cgen_hw_lookup_by_name): 'i' is now unsigned.
1429         (cgen_hw_lookup_by_num): Ditto.
1430         (cgen_operand_lookup_by_name): Ditto.
1431         (print_address): Ditto.
1432         (print_keyword): Ditto.
1433         * cgen-dis.c (hash_insn_array): Mark unused parameters with
1434         ATTRIBUTE_UNUSED.
1435         * cgen-asm.c (hash_insn_array): Mark unused parameters with
1436         ATTRIBUTE_UNUSED.
1437         (cgen_parse_keyword): Ditto.
1438
1439 2000-07-22  Jason Eckhardt  <jle@redhat.com>
1440
1441         * i860-dis.c: New file.
1442         (print_insn_i860): New function.
1443         (print_br_address): New function.
1444         (sign_extend): New function.
1445         (BITWISE_OP): New macro.
1446         (I860_REG_PREFIX): New macro.
1447         (grnames, frnames, crnames): New structures.
1448
1449         * disassemble.c (ARCH_i860): Define.
1450         (disassembler): Add check for bfd_arch_i860 to set disassemble
1451         function to print_insn_i860.
1452
1453         * Makefile.in (CFILES): Added i860-dis.c.
1454         (ALL_MACHINES): Added i860-dis.lo.
1455         (i860-dis.lo): New dependences.
1456
1457         * configure.in: New bits for bfd_i860_arch.
1458
1459         * configure: Regenerated.
1460
1461 2000-07-20  Hans-Peter Nilsson  <hp@axis.com>
1462
1463         * Makefile.am (CFILES): Add cris-dis.c and cris-opc.c.
1464         (ALL_MACHINES): Add cris-dis.lo and cris-opc.lo.
1465         (cris-dis.lo, cris-opc.lo): New rules.
1466         * Makefile.in: Rebuild.
1467         * configure.in (bfd_cris_arch): New target.
1468         * configure: Rebuild.
1469         * disassemble.c (ARCH_cris): Define.
1470         (disassembler): Support ARCH_cris.
1471         * cris-dis.c, cris-opc.c: New files.
1472         * po/POTFILES.in, po/opcodes.pot: Regenerate.
1473
1474 2000-07-11  Jakub Jelinek  <jakub@redhat.com>
1475
1476         * sparc-opc.c (sparc_opcodes): popc has 0 in rs1, not rs2.
1477         Reported by Bill Clarke <llib@computer.org>.
1478
1479 2000-07-09  Geoffrey Keating  <geoffk@redhat.com>
1480
1481         * ppc-opc.c (powerpc_opcodes): Correct suffix for vslw.
1482         Patch by Randall J Fisher <rfisher@ecn.purdue.edu>.
1483
1484 2000-07-09  Alan Modra  <alan@linuxcare.com.au>
1485
1486         * hppa-dis.c (fput_reg, fput_fp_reg, fput_fp_reg_r, fput_creg,
1487         fput_const, extract_3, extract_5_load, extract_5_store,
1488         extract_5r_store, extract_5R_store, extract_10U_store,
1489         extract_5Q_store, extract_11, extract_14, extract_16, extract_21,
1490         extract_12, extract_17, extract_22): Prototype.
1491         (print_insn_hppa): Rename inner block opcode -> opc to avoid
1492         shadowing outer block.
1493         (GET_BIT): Define.
1494
1495 2000-07-05  DJ Delorie  <dj@redhat.com>
1496
1497         * MAINTAINERS: new
1498
1499 2000-07-04  Alexandre Oliva  <aoliva@redhat.com>
1500
1501         * arm-dis.c (print_insn_arm): Output combinations of PSR flags.
1502
1503 2000-07-03  Marek Michalkiewicz  <marekm@linux.org.pl>
1504
1505         * avr-dis.c (avr_operand): Change _ () to _() around all strings
1506         marked for translation (exception from the usual coding style).
1507         (print_insn_avr): Initialize insn2 to avoid warnings.
1508
1509 2000-07-03  Kazu Hirata  <kazu@hxi.com>
1510
1511         * h8300-dis.c (bfd_h8_disassemble): Improve readability.
1512         * h8500-dis.c: Fix formatting.
1513
1514 2000-07-01  Alan Modra  <alan@linuxcare.com.au>
1515
1516         * Makefile.am (DEP): Fix 2000-06-22.  grep after running dep.sed
1517         (CLEANFILES): Add DEPA.
1518         * Makefile.in: Regenerate.
1519
1520 2000-06-26  Scott Bambrough  <scottb@netwinder.org>
1521
1522         * arm-dis.c (regnames): Add an additional register set to match
1523         the set used by GCC.  Make it the default.
1524
1525 2000-06-22  Alan Modra  <alan@linuxcare.com.au>
1526
1527         * Makefile.am (DEP): grep for leading `/' in DEP1, and fail if we
1528         find one.
1529         * Makefile.in: Regenerate.
1530
1531 2000-06-20  H.J. Lu  <hjl@gnu.org>
1532
1533         * Makefile.am: Rebuild dependency.
1534         * Makefile.in: Rebuild.
1535
1536 2000-06-18  Stephane Carrez  <stcarrez@worldnet.fr>
1537
1538         * Makefile.in, configure: regenerate
1539         * disassemble.c (disassembler): Recognize ARCH_m68hc12,
1540         ARCH_m68hc11.
1541         * m68hc11-dis.c (read_memory, print_insn, print_insn_m68hc12):
1542         New functions.
1543         * configure.in: Recognize m68hc12 and m68hc11.
1544         * m68hc11-dis.c, m68hc11-opc.c: New files for support of m68hc1x
1545         * Makefile.am (CFILES, ALL_MACHINES): New files for disassembly
1546         and opcode generation for m68hc11 and m68hc12.
1547
1548 2000-06-16  Nick Duffek  <nsd@redhat.com>
1549
1550         * disassemble.c (disassembler): Refer to the PowerPC 620 using
1551         bfd_mach_ppc_620 instead of 620.
1552
1553 2000-06-12  Kazu Hirata  <kazu@hxi.com>
1554
1555         * h8300-dis.c: Fix formatting.
1556         (bfd_h8_disassemble): Distinguish adds/subs, inc/dec.[wl]
1557         correctly.
1558
1559 2000-06-09  Denis Chertykov  <denisc@overta.ru>
1560
1561         * avr-dis.c (avr_operand): Bugfix for jmp/call address.
1562
1563 2000-06-07  Denis Chertykov  <denisc@overta.ru>
1564
1565         * avr-dis.c: completely rewritten.
1566
1567 2000-06-02  Kazu Hirata  <kazu@hxi.com>
1568
1569         * h8300-dis.c: Follow the GNU coding style.
1570         (bfd_h8_disassemble) Fix a typo.
1571
1572 2000-06-01  Kazu Hirata  <kazu@hxi.com>
1573
1574         * h8300-dis.c (bfd_h8_disassemble_init): Fix a typo.
1575         (bfd_h8_disassemble): Distinguish the operand size of inc/dev.[wl]
1576         correctly.  Fix a typo.
1577
1578 2000-05-31  Nick Clifton  <nickc@redhat.com>
1579
1580         * opintl.h (_(String)): Explain why dgettext is used instead of
1581         gettext.
1582
1583 2000-05-30  Nick Clifton  <nickc@redhat.com>
1584
1585         * opintl.h (gettext, dgettext, dcgettext, textdomain,
1586         bindtextdomain): Replace defines with those from intl/libgettext.h
1587         to quieten gcc warnings.
1588
1589 2000-05-26  Alan Modra  <alan@linuxcare.com.au>
1590
1591         * Makefile.am: Update dependencies with "make dep-am"
1592         * Makefile.in: Regenerate.
1593
1594 2000-05-25  Alexandre Oliva  <aoliva@redhat.com>
1595
1596         * m10300-dis.c (disassemble): Don't assume 32-bit longs when
1597         sign-extending operands.
1598
1599 2000-05-15  Donald Lindsay  <dlindsay@redhat.com>
1600
1601         * d10v-opc.c (d10v_opcodes): add ALONE tag to all short branches
1602         except brf's.
1603
1604 2000-05-21  Nick Clifton  <nickc@redhat.com>
1605
1606         * Makefile.am (LIBIBERTY): Define.
1607
1608 2000-05-19 Diego Novillo <dnovillo@redhat.com>
1609
1610         * mips-dis.c (REGISTER_NAMES): Rename to STD_REGISTER_NAMES.
1611         (STD_REGISTER_NAMES): New name for REGISTER_NAMES.
1612         (reg_names): Rename to std_reg_names. Change it to a char **
1613         static variable.
1614         (std_reg_names): New name for reg_names.
1615         (set_mips_isa_type): Set reg_names to point to std_reg_names by
1616         default.
1617
1618 2000-05-16  Frank Ch. Eigler  <fche@redhat.com>
1619
1620         * fr30-desc.h: Partially regenerated to account for changed
1621         CGEN_MAX_* -> CGEN_ACTUAL_MAX_* macros.
1622         * m32r-desc.h: Ditto.
1623
1624 2000-05-15  Nick Clifton  <nickc@redhat.com>
1625
1626         * arm-opc.h: Use upper case for flasg in MSR and MRS
1627         instructions.  Allow any bit to be set in the field_mask of
1628         the MSR instruction.
1629
1630         * arm-dis.c (print_insn_arm): Decode _x and _s bits of the
1631         field_mask of an MSR instruction.
1632
1633 2000-05-11  Thomas de Lellis  <tdel@windriver.com>
1634
1635         * arm-opc.h: Disassembly of thumb ldsb/ldsh
1636         instructions changed to ldrsb/ldrsh.
1637
1638 2000-05-11  Ulf Carlsson  <ulfc@engr.sgi.com>
1639
1640         * mips-dis.c (print_insn_arg): Don't mask top 32 bits of 64-bit
1641         target addresses for 'jal' and 'j'.
1642
1643 2000-05-10  Geoff Keating  <geoffk@redhat.com>
1644
1645         * ppc-opc.c (powerpc_opcodes): Make the predicted-branch opcodes
1646         also available in common mode when powerpc syntax is being used.
1647
1648 2000-05-08  Alan Modra  <alan@linuxcare.com.au>
1649
1650         * m68k-dis.c (dummy_printer): Add ATTRIBUTE_UNUSED to args.
1651         (dummy_print_address): Ditto.
1652
1653 2000-05-04  Timothy Wall  <twall@redhat.com>
1654
1655         * tic54x-opc.c: New.
1656         * tic54x-dis.c: New.
1657         * disassemble.c (disassembler): Add ARCH_tic54x.
1658         * configure.in: Added tic54x target.
1659         * configure: Ditto.
1660         * Makefile.am: Add tic54x dependencies.
1661         * Makefile.in: Ditto.
1662
1663 2000-05-03  J.T. Conklin  <jtc@redback.com>
1664
1665         * ppc-opc.c (VA, VB, VC, VD, VS, SIMM, UIMM, SHB): New macros, for
1666         vector unit operands.
1667         (VX, VX_MASK, VXA, VXA_MASK, VXR, VXR_MASK): New macros, for vector
1668         unit instruction formats.
1669         (PPCVEC): New macro, mask for vector instructions.
1670         (powerpc_operands): Add table entries for above operand types.
1671         (powerpc_opcodes): Add table entries for vector instructions.
1672
1673         * ppc-dis.c (print_insn_big_powerpc): Add PPC_OPCODE_ALTIVEC to mask.
1674         (print_insn_little_powerpc): Likewise.
1675         (print_insn_powerpc): Prepend 'v' when printing vector registers.
1676
1677 2000-04-24  Clinton Popetz  <cpopetz@redhat.com>
1678
1679         * configure.in: Add bfd_powerpc_64_arch.
1680         * disassemble.c (disassembler): Use print_insn_big_powerpc for
1681         64 bit code.
1682
1683 2000-04-24  Nick Clifton  <nickc@redhat.com>
1684
1685         * fr30-desc.c (fr30_cgen_cpu_open): Initialise signed_overflow
1686         field.
1687
1688 2000-04-23  Denis Chertykov  <denisc@overta.ru>
1689
1690         * avr-dis.c (reg_fmul_d): New. Extract destination register from
1691         FMUL instruction.
1692         (reg_fmul_r): New. Extract source register from FMUL instruction.
1693         (reg_muls_d): New. Extract destination register from MULS instruction.
1694         (reg_muls_r): New. Extract source register from MULS instruction.
1695         (reg_movw_d): New. Extract destination register from MOVW instruction.
1696         (reg_movw_r): New. Extract source register from MOVW instruction.
1697         (print_insn_avr): Handle MOVW, MULS, MULSU, FMUL, FMULS, FMULSU,
1698         EICALL, EIJMP, LPM r,Z, ELPM r,Z, SPM, ESPM instructions.
1699
1700 2000-04-22  Timothy Wall  <twall@redhat.com>
1701
1702         * ia64-gen.c (general): Add an ordered table of primary
1703         opcode names, as well as priority fields to disassembly data
1704         structures to enforce a preferred disassembly format based on the
1705         ordering of the opcode tables.
1706         (load_insn_classes): Show a useful message if IC tables are missing.
1707         (load_depfile): Ditto.
1708         * ia64-asmtab.h (struct ia64_dis_names ): Add priority flag to
1709         distinguish preferred disassembly.
1710         * ia64-opc-f.c: Reorder some insn for preferred disassembly
1711         format.  Fix incorrect flag on fma.s/fma.s.s0.
1712         * ia64-opc.c: Scan *all* disassembly matches and use the one with
1713         the highest priority.
1714         * ia64-opc-b.c: Use more abbreviations.
1715         * ia64-asmtab.c: Regenerate.
1716
1717 2000-04-21  Jason Eckhardt  <jle@redhat.com>
1718
1719         * hppa-dis.c (extract_16): New function.
1720         (print_insn_hppa): Fix incorrect handling of 'fe'. Added handling of
1721         new operand types l,y,&,fe,fE,fx.
1722
1723 2000-04-21  Richard Henderson  <rth@redhat.com>
1724             David Mosberger  <davidm@hpl.hp.com>
1725             Timothy Wall <twall@redhat.com>
1726             Bob Manson  <manson@charmed.cygnus.com>
1727             Jim Wilson  <wilson@redhat.com>
1728
1729         * Makefile.am (HFILES): Add ia64-asmtab.h, ia64-opc.h.
1730         (CFILES): Add ia64-dis.c, ia64-opc-a.c, ia64-opc-b.c, ia64-opc-f.c,
1731         ia64-opc-i.c, ia64-opc-m.c, ia64-opc-d.c, ia64-opc.c, ia64-gen.c,
1732         ia64-asmtab.c.
1733         (ALL_MACHINES): Add ia64-dis.lo, ia64-opc.lo.
1734         (ia64-ic.tbl, ia64-raw.tbl, ia64-waw.tbl, ia64-war.tbl, ia64-gen,
1735         ia64-gen.o, ia64-asmtab.c, ia64-dis.lo, ia64-opc.lo): New rules.
1736         * Makefile.in: Rebuild.
1737         * configure Rebuild.
1738         * configure.in (bfd_ia64_arch): New target.
1739         * disassemble.c (ARCH_ia64): Define.
1740         (disassembler): Support ARCH_ia64.
1741         * ia64-asmtab.c, ia64-asmtab.h, ia64-dis.c, ia64-gen.c ia64-ic.tbl,
1742         ia64-opc-a.c, ia64-opc-b.c, ia64-opc-d.c ia64-opc-f.c, ia64-opc-i.c,
1743         ia64-opc-m.c, ia64-opc-x.c, ia64-opc.c, ia64-opc.h, ia64-raw.tbl,
1744         ia64-war.tbl, ia64-waw.tbl: New files.
1745
1746 2000-04-20  Alexandre Oliva  <aoliva@redhat.com>
1747
1748         * m10300-dis.c (HAVE_AM30, HAVE_AM33): Define.
1749         (disassemble): Use them.
1750
1751 2000-04-14  Alan Modra  <alan@linuxcare.com.au>
1752
1753         * sysdep.h: Include "ansidecl.h" not <ansidecl.h>
1754         * Makefile.am: Update dependencies.
1755         * Makefile.in: Regenerate.
1756
1757 2000-04-14  Michael Sokolov  <msokolov@ivan.Harhan.ORG>
1758
1759         * a29k-dis.c, alpha-dis.c, alpha-opc.c, arc-dis.c, arc-opc.c,
1760         avr-dis.c, d10v-dis.c, d10v-opc.c, d30v-dis.c, d30v-opc.c,
1761         disassemble.c, h8300-dis.c, h8500-dis.c, hppa-dis.c, i370-dis.c,
1762         i370-opc.c, i960-dis.c, m10200-dis.c, m10200-opc.c, m10300-dis.c,
1763         m10300-opc.c, m68k-dis.c, m68k-opc.c, m88k-dis.c, mcore-dis.c,
1764         mips-dis.c, mips-opc.c, mips16-opc.c, pj-dis.c, pj-opc.c,
1765         ppc-dis.c, ppc-opc.c, sh-dis.c, sparc-dis.c, sparc-opc.c,
1766         tic80-dis.c, tic80-opc.c, v850-dis.c, v850-opc.c, vax-dis.c,
1767         w65-dis.c, z8k-dis.c, z8kgen.c: Include sysdep.h.  Remove
1768         ansidecl.h as sysdep.h includes it.
1769
1770 2000-04-7  Andrew Cagney  <cagney@b1.redhat.com>
1771
1772         * configure.in (WARN_CFLAGS): Set to -W -Wall by default.  Add
1773         --enable-build-warnings option.
1774         * Makefile.am (AM_CFLAGS, WARN_CFLAGS): Add definitions.
1775         * Makefile.in, configure: Re-generate.
1776
1777 2000-04-05  J"orn Rennecke <amylaar@redhat.com>
1778
1779         * sh-opc.h (sh_table): Use A_DISP_PC / PCRELIMM_8BY2 for ldre & ldrs.
1780         stc GBR,@-<REG_N> is available for arch_sh1_up.
1781         Group parallel processing insn with identical mnemonics together.
1782         Make three-operand psha / pshl come first.
1783
1784 2000-04-05  J"orn Rennecke <amylaar@redhat.co.uk>
1785
1786         * sh-opc.h (sh_nibble_type): Remove DISP_8 and DISP_4.
1787         Split IMM_[48]{,BY[24]} into IMM[01]_[48]{,BY[24]}.  Add REPEAT.
1788         (sh_arg_type): Add A_PC.
1789         (sh_table): Update entries using immediates.  Add repeat.
1790         * sh-dis.c (print_insn_shx): Remove DISP_8 and DISP_4.
1791         Split IMM_[48]{,BY[24]} into IMM[01]_[48]{,BY[24]}.  Add REPEAT.
1792
1793 2000-04-04  Alan Modra  <alan@linuxcare.com.au>
1794
1795         * po/opcodes.pot: Regenerate.
1796
1797         * Makefile.am (MKDEP): Use gcc -MM rather than mkdep.
1798         (DEP): Quote when passing vars to sub-make.  Add warning message
1799         to end.
1800         (DEP1): Rewrite for "gcc -MM".
1801         (CLEANFILES): Add DEP2.
1802         Update dependencies.
1803         * Makefile.in: Regenerate.
1804
1805 2000-04-03  Denis Chertykov  <denisc@overta.ru>
1806
1807         * avr-dis.c: Syntax cleanup.
1808         (add0fff): Print the pc relative address as a signed number.
1809         (add03f8): Likewise.
1810
1811 2000-04-01  Ian Lance Taylor  <ian@zembu.com>
1812
1813         * disassemble.c (disassembler_usage): Don't use a prototype.  Mark
1814         the parameter ATTRIBUTE_UNUSED.
1815         * ppc-opc.c: Add ATTRIBUTE_UNUSED as needed.
1816
1817 2000-04-01  Alexandre Oliva  <aoliva@redhat.com>
1818
1819         * m10300-opc.c: SP-based offsets are always unsigned.
1820
1821 2000-03-29  Thomas de Lellis  <tdel@windriver.com>
1822
1823         * arm-opc.h (thumb_opcodes): Disassemble 0xde.. to "bal"
1824         [branch always] instead of "undefined".
1825
1826 2000-03-27  Nick Clifton  <nickc@redhat.com>
1827
1828         * d30v-opc.c (d30v_format_table): Move SHORT_AR to end of list of
1829         short instructions, from end of list of long instructions.
1830
1831 2000-03-27  Ian Lance Taylor  <ian@zembu.com>
1832
1833         * Makefile.am (CFILES): Add avr-dis.c.
1834         (ALL_MACHINES): Add avr-dis.lo.
1835
1836 2000-03-27  Alan Modra  <alan@linuxcare.com>
1837
1838         * avr-dis.c (add0fff, add03f8): Don't use structure bitfields to
1839         truncate integers.
1840         (print_insn_avr): Call function via pointer in K&R compatible way.
1841         (dispLDD, regPP, reg50, reg104, reg40, reg20w, lit404, lit204,
1842         add0fff, add03f8): Convert to old style function declaration and
1843         add prototype.
1844         (avrdis_opcode): Add prototype.
1845
1846 2000-03-27  Denis Chertykov  <denisc@overta.ru>
1847
1848         * avr-dis.c: New file.  AVR disassembler.
1849         * configure.in (bfd_avr_arch): New architecture support.
1850         * disassemble.c: Likewise.
1851         * configure: Regenerate.
1852
1853 2000-03-06  J"oern Rennecke <amylaar@redhat.com>
1854
1855         * sh-opc.h (sh_table): ldre and ldrs have a *signed* displacement.
1856
1857 2000-03-02  J"orn Rennecke <amylaar@redhat.co.uk>
1858
1859         * d30v-dis.c (print_insn): Remove d*i hacks.  Use per-operand
1860         flag to determine if operand is pc-relative.
1861         * d30v-opc.c:
1862         (d30v_format_table):
1863         (REL6S3): Renamed from IMM6S3.
1864         Added flag OPERAND_PCREL.
1865         (REL12S3, REL18S3, REL32): Split from IMM12S3, IMM18S3, REL32, with
1866         added flag OPERAND_PCREL.
1867         (IMM12S3U): Replaced with REL12S3.
1868         (SHORT_D2, LONG_D): Delay target is pc-relative.
1869         (SHORT_B2r, SHORT_B3r, SHORT_B3br, SHORT_D2r, LONG_Ur, LONG_2r):
1870         Split from SHORT_B2, SHORT_D2, SHORT_B3b, SHORT_D2, LONG_U, LONG_2r,
1871         using the REL* operands.
1872         (LONG_2br, LONG_Dr): Likewise, from LONG_2b, LONG_D.
1873         (SHORT_D1r, SHORT_D2Br, LONG_Dbr): Renamed from SHORT_D1, SHORT_D2B,
1874         LONG_Db, using REL* operands.
1875         (SHORT_U, SHORT_A5S): Removed stray alternatives.
1876         (d30v_opcode_table): Use new *r formats.
1877
1878 2000-02-28  Nick Clifton  <nickc@redhat.com>
1879
1880         * m32r-desc.c (m32r_cgen_cpu_open): Replace 'flags' with
1881         'signed_overflow_ok_p'.
1882
1883 2000-02-27  Eli Zaretskii  <eliz@is.elta.co.il>
1884
1885         * Makefile.am (stamp-lib): Use $(LIBTOOL) --config to get the
1886         name of the libtool directory.
1887         * Makefile.in: Rebuild.
1888
1889 2000-02-24  Nick Clifton  <nickc@redhat.com>
1890
1891         * cgen-opc.c (cgen_set_signed_overflow_ok): New function.
1892         (cgen_clear_signed_overflow_ok): New function.
1893         (cgen_signed_overflow_ok_p): New function.
1894
1895 2000-02-23  Andrew Haley  <aph@redhat.com>
1896
1897         * m32r-asm.c, m32r-desc.c, m32r-desc.h, m32r-dis.c,
1898         m32r-ibld.c, m32r-opc.h: Rebuild.
1899
1900 2000-02-23  Linas Vepstas <linas@linas.org>
1901
1902         * i370-dis.c, i370-opc.c: New.
1903
1904         * disassemble.c (ARCH_i370): Define.
1905         (disassembler): Handle it.
1906
1907         * Makefile.am: Add support for Linux/IBM 370.
1908         * configure.in: Likewise.
1909
1910         * Makefile.in: Regenerate.
1911         * configure: Likewise.
1912
1913 2000-02-22  Chandra Chavva   <cchavva@redhat.com>
1914
1915         * d30v-opc.c (d30v_opcode_tab) : Added FLAG_NOT_WITH_ADDSUBppp to
1916         ST2H, STB, STH, STHH, STW and ST2H opcodes to prohibit parallel
1917         procedure.
1918
1919 2000-02-22  Andrew Haley  <aph@redhat.com>
1920
1921         * mips-dis.c (_print_insn_mips): New arg for OPCODE_IS_MEMBER:
1922         force gp32 to zero.
1923         * mips-opc.c (G6): New define.
1924         (mips_builtin_op): Add "move" definition for -gp32.
1925
1926 2000-02-22  Ian Lance Taylor  <ian@zembu.com>
1927
1928         From Grant Erickson <gerickso@Brocade.COM>:
1929         * ppc-opc.c: Correct dcread--it takes 3 arguments, not 2.
1930
1931 2000-02-21  Alan Modra  <alan@spri.levels.unisa.edu.au>
1932
1933         * dis-buf.c (buffer_read_memory): Change `length' param and all int
1934         vars to unsigned.
1935
1936 2000-02-17 J"orn Rennecke <amylaar@redhat.co.uk>
1937
1938         * sh-dis.c (print_movxy, print_insn_ddt, print_dsp_reg): New functions.
1939         (print_insn_ppi): Likewise.
1940         (print_insn_shx): Use info->mach to select appropriate insn set.
1941         Add support for sh-dsp.  Remove FD_REG_N support.
1942         * sh-opc.h (sh_nibble_type): Add new values for sh-dsp support.
1943         (sh_arg_type): Likewise.  Remove FD_REG_N.
1944         (sh_dsp_reg_nums): New enum.
1945         (arch_sh1, arch_sh2, arch_sh3, arch_sh3e, arch_sh4): New macros.
1946         (arch_sh_dsp, arch_sh3_dsp, arch_sh1_up, arch_sh2_up): Likewise.
1947         (arch_sh3_up, arch_sh3e_up, arch_sh4_up, arch_sh_dsp_up): Likewise.
1948         (arch_sh3_dsp_up): Likewise.
1949         (sh_opcode_info): New field: arch.
1950         (sh_table): Split up insn with FD_REG_N into ones with F_REG_N and
1951         D_REG_N.  Fill in arch field.  Add sh-dsp insns.
1952
1953 2000-02-14  Fernando Nasser  <fnasser@totem.to.redhat.com>
1954
1955         * arm-dis.c: Change flavor name from atpcs-special to
1956         special-atpcs to prevent name conflict in gdb.
1957         (get_arm_regname_num_options, set_arm_regname_option,
1958         get_arm_regnames): New functions.  API to access the several
1959         flavor of register names.  Note: Used by gdb.
1960         (print_insn_thumb): Use the register name entry from the currently
1961         selected flavor for LR and PC.
1962
1963 2000-02-10  Nick Clifton  <nickc@redhat.com>
1964
1965         * mcore-opc.h (enum mcore_opclass): Add MULSH and OPSR
1966         classes.
1967         (mcore_table): Add "idly4", "psrclr", "psrset", "mulsh" and
1968         "mulsh.h" instructions.
1969         * mcore-dis.c (imsk array): Add masks for MULSH and OPSR
1970         classes.
1971         (print_insn_mcore): Add support for little endian targets.
1972         Add support for MULSH and OPSR classes.
1973
1974 2000-02-07  Nick Clifton  <nickc@redhat.com>
1975
1976         * arm-dis.c (parse_arm_diassembler_option): Rename again.
1977         Previous delat did not take.
1978
1979 2000-02-03  Timothy Wall  <twall@redhat.com>
1980
1981         * dis-buf.c (buffer_read_memory):  Use octets_per_byte field
1982         to adjust target address bounds checking and calculate the
1983         appropriate octet offset into data.
1984
1985 2000-01-27  Nick Clifton  <nickc@redhat.com>
1986
1987         * arm-dis.c: (parse_disassembler_option): Rename to
1988         parse_arm_disassembler_option and allow to be exported.
1989
1990         * disassemble.c (disassembler_usage): New function: Print out any
1991         target specific disassembler options.
1992         Call arm_disassembler_options() if the ARM architecture is being
1993         supported.
1994
1995         * arm-dis.c (NUM_ELEM): Define this macro if not already
1996         defined.
1997         (arm_regname): New struct type for ARM register names.
1998         (arm_toggle_regnames): Delete.
1999         (parse_disassembler_option): Use register name structure.
2000         (print_insn): New function: Combines duplicate code found in
2001         print_insn_big_arm and print_insn_little_arm.
2002         (print_insn_big_arm): Call print_insn.
2003         (print_insn_little_arm): Call print_insn.
2004         (print_arm_disassembler_options): Display list of supported,
2005         ARM specific disassembler options.
2006
2007 2000-01-27  Thomas de Lellis  <tdel@windriver.com>
2008
2009         * arm-dis.c (printf_insn_big_arm): Treat ELF symbols with the
2010         ARM_STT_16BIT flag as Thumb code symbols.
2011
2012         * arm-dis.c (printf_insn_little_arm): Ditto.
2013
2014 2000-01-25  Thomas de Lellis  <tdel@windriver.com>
2015
2016         * arm-dis.c (printf_insn_thumb): Prevent double dumping
2017         of raw thumb instructions.
2018
2019 2000-01-20  Nick Clifton  <nickc@redhat.com>
2020
2021         * mcore-opc.h (mcore_table): Add "add" as an alias for "addu".
2022
2023 2000-01-03  Nick Clifton  <nickc@cygnus.com>
2024
2025         * arm-dis.c (streq): New macro.
2026         (strneq): New macro.
2027         (force_thumb): ew local variable.
2028         (parse_disassembler_option): New function: Parse a single, ARM
2029         specific disassembler command line switch.
2030         (parse_disassembler_option): Call parse_disassembler_option to
2031         parse individual command line switches.
2032         (print_insn_big_arm): Check force_thumb.
2033         (print_insn_little_arm): Check force_thumb.
2034
2035 For older changes see ChangeLog-9899
2036 \f
2037 Local Variables:
2038 mode: change-log
2039 left-margin: 8
2040 fill-column: 74
2041 version-control: never
2042 End: