opcodes/ChangeLog

   1 2001-11-04  Chris Demetriou  <cgd@broadcom.com>
   2
   3         * mips-dis.c (print_insn_mips): Remove spaces at end of line.
   4
   5 2001-11-02  Nick Clifton  <nickc@cambridge.redhat.com>
   6
   7         * configure.in (ALL_LINGUAS): Add "fr", "sv" and "tr".
   8         * configure: Regernate.
   9         * po/fr.po: New file.
  10         * po/sv.po: New file.
  11         * po/tr.po: New file.
  12
  13 2001-11-01  Stephane Carrez  <Stephane.Carrez@worldnet.fr>
  14
  15         * m68hc11-dis.c (print_insn): Fix disassembly of movb with a
  16         constant as source.
  17
  18 2001-10-30  Hans-Peter Nilsson  <hp@bitrange.com>
  19
  20         * Makefile.am (CFILES): Add mmix-dis.c and mmix-opc.c.  Regenerate
  21         dependencies.
  22         * Makefile.in: Regenerate.
  23         * mmix-dis.c, mmix-opc.c: New files.
  24
  25 2001-10-29  Kazu Hirata  <kazu@hxi.com>
  26
  27         * d30v-dis.c: Fix a comment typo.
  28
  29 2001-10-23  Chris Demetriou  <cgd@broadcom.com>
  30
  31         * mips-opc.c (mips_builtin_opcodes): Mark "bgezall" and
  32         "bltzall" as writing GPR 31 (since they do).
  33
  34         * mips-dis.c (print_insn_arg): Calculate info->target
  35         where appropriate.
  36         (print_insn_mips): Fill in instruction info.
  37         (print_mips16_insn_arg): Remove unneded variable 'val'.
  38         Removed duplicated instruction target calculations,
  39         calculate once and print that result.  Use same idiom for
  40         masking the jump segment bits as is used in print_insn_arg.
  41
  42 2001-10-20  Alan Modra  <amodra@bigpond.net.au>
  43
  44         * ppc-opc.c (CT): Make it an optional operand.
  45
  46 2001-10-17  Chris Demetriou  <cgd@broadcom.com>
  47
  48         * mips-dis.c (mips_isa_type): Make the ISA used to disassemble
  49         SB-1 binaries include instructions specific to the SB-1.
  50         * mips-opc.c (SB1): New definition.
  51         (mips_builtin_opcodes): Add SB-1 extension opcodes "div.ps",
  52         "recip.ps", "rsqrt.ps", and "sqrt.ps".
  53
  54 2001-10-17  matthew green  <mrg@redhat.com>
  55
  56         * ppc-opc.c (STRM): New AltiVec operand.
  57         (XDSS): New AltiVec instruction form.
  58         (mtvscr): Correct operand list.
  59         (dst, dstt, dstst, dststt, dss, dssall): AltiVec instructions.
  60
  61 2001-10-17  Alan Modra  <amodra@bigpond.net.au>
  62
  63         * po/POTFILES.in: Regenerate.
  64
  65 2001-10-13  matthew green  <mrg@redhat.com>
  66
  67         * ppc-opc.c (MO): New macro for MO field of mbar instruction.
  68         (powerpc_opcodes): Add rfci, wrtee, wrteei, mfdcrx, mfdcr,
  69         mtdcrx, mtdcr, msync, dcba and mbar as BookE instructions.
  70
  71 2001-10-13  Nick Clifton  <nickc@cambridge.redhat.com>
  72
  73         * cgen-ibld.in: Include safe-ctype.h in preference to
  74         ctype.h.
  75         * cgen-asm.in: Include safe-ctype.h in preference to
  76         ctype.h.  Fix formatting.  Use ISSPACE instead of isspace and
  77         TOLOWER instead of tolower.
  78         (@arch@_cgen_build_insn_regex): Remove duplication of syntax
  79         string elements in constructed regular expression.
  80         * fr30-asm.c: Regenerate.
  81         * fr30-desc.c: Regenerate.
  82         * fr30-ibld.c: Regenerate.
  83         * m32r-asm.c: Regenerate.
  84         * m32r-desc.c: Regenerate.
  85         * m32r-ibld.c: Regenerate.
  86         * openrisc-asm.c: Regenerate.
  87         * openrisc-desc.c: Regenerate.
  88         * openrisc-ibld.c: Regenerate.
  89         * po/opcodes.pot: Regenerate.
  90
  91 2001-10-12  matthew green  <mrg@redhat.com>
  92
  93         * ppc-opc.c (insert_de, extract_de, insert_des, extract_des): New
  94         instruction field instruction/extraction functions for new BookE
  95         DE form instructions.
  96         (CT): New macro for CT field in an X form instruction.
  97         (DE, DES, DEO, DE_MASK): New macros for DE/DES fields in DE form
  98         instructions.
  99         (PPC64): Don't include PPC_OPCODE_PPC.
 100         (403): New opcode macro for PPC403 processors.
 101         (BOOKE): New opcode macro for BookE processors.
 102         (bce, bcel, bcea, bcela, bclre, bclrel: New BookE instructions.
 103         (bcctre, bcctrel, be, bel, bea, bela, icbt, icbte, lwzxe): Likewise.
 104         (dcbste, lwzuxe, luxe, dcbfe, lbzxe, lwarxe, lbzuxe): Likewise.
 105         (stwcxe, stwxe, stxe, stwuxe, stuxe, stbxe, dcbtste, stbuxe): Likewise.
 106         (mfapidi, dcbte, lhzxe, lhzuxe, lhaxe, lhauxe, subfe64): Likewise.
 107         (subfeo64, adde64, addeo64, sthxe, sthuxe, subfze64): Likewise.
 108         (subfzeo64, addze64, addzeo64, dcbie, subfme64, subfmeo64): Likewise.
 109         (addme64, addmeo64, stdcxe., mcrxr64, lwbrxe, lfsxe, lfsuxe): Likewise.
 110         (lfdxe, lfduxe, stwbrxe, stfsxe, stfsuxe, stfdxe, dcbae): Likewise.
 111         (stfduxe, tlbivax, tlbivaxe, lhbrxe, ldxe, lduxe, tlbsx): Likewise.
 112         (tlbsxe, sthbrxe, stdxe, stduxe, icbie, stfiwxe, dcbze, lbze): Likewise.
 113         (lbzue, ldue, lhze, lhzue, lhae, lhaue, lwze, lwzue): Likewise.
 114         (stbe, stbue, sthe, sthue, stwe, stwue, lfse, lfsue, lfde): Likewise.
 115         (lfdue, stde, stdue, stfse, stfsue, stfde, stfdue): Likewise.
 116
 117         * ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc): Look
 118         for a disassembler option of `booke', `booke32' or `booke64' to enable
 119         BookE support in the disassembler.
 120
 121 2001-10-12  John Healy  <jhealy@redhat.com>
 122
 123         * cgen-dis.in (print_insn): Use min (cd->base_insn_bitsize, buflen*8)
 124         for the length when extracting the base part of the insn.
 125
 126 2001-10-09  Bruno Haible  <haible@clisp.cons.org>
 127
 128         * cgen-asm.in (*_cgen_build_insn_regex): Generate a case sensitive
 129         regular expression.  Fix some formatting problems.
 130         * fr30-asm.c: Regenerate.
 131         * openrisc-asm.c: Regenerate.
 132         * m32r-asm.c: Regenerate.
 133
 134 2001-10-09  Christian Groessler <cpg@aladdin.de>
 135
 136         * z8k-dis.c (unparse_instr): Fixed formatting. Change disassembly
 137         of indirect register memory accesses to be same format the
 138         assembler accepts.
 139
 140 2001-10-09  Nick Clifton  <nickc@cambridge.redhat.com>
 141
 142         * sh-opc.h: Fix encoding of least significant nibble of the
 143         DSP single data transfer instructions.
 144
 145         * sh-dis.c (print_insn_shx): Fix decoding of As opcode in DSP
 146         instructions.
 147
 148 2001-10-08  Nick Clifton  <nickc@cambridge.redhat.com>
 149
 150         * cgen-asm.in: Fix compile time warning messages in generated
 151         C files.
 152         * cgen-dis.in: The same.
 153         * cgen-ibld.in: The same.
 154         * fr30-asm.c: Regenerate.
 155         * fr30-desc.c: Regenerate.
 156         * fr30-dis.c: Regenerate.
 157         * fr30-ibld.c: Regenerate.
 158         * fr30-opc.c: Regenerate.
 159         * m32r-asm.c: Regenerate.
 160         * m32r-desc.c: Regenerate.
 161         * m32r-dis.c: Regenerate.
 162         * m32r-ibld.c: Regenerate.
 163         * m32r-opc.c: Regenerate.
 164         * m32r-opinst.c Regenerate.
 165         * openrisc-asm.c: Regenerate.
 166         * openrisc-desc.c: Regenerate.
 167         * openrisc-dis.c: Regenerate.
 168         * openrisc-ibld.c: Regenerate.
 169         * openrisc-opc.c: Regenerate.
 170         * openrisc-opc.h: Regenerate.
 171         * Makefile.in: Regenerate.
 172         * po/POTFILES.in: Regenerate.
 173         * po/opcodes.pot: Regenerate.
 174
 175 2001-10-08  Aldy Hernandez  <aldyh@redhat.com>
 176
 177         * arm-opc.h (arm_opcodes): Add cirrus insns.
 178
 179         * arm-dis.c (print_insn_arm): Add 'I' case.
 180
 181 2001-10-03  Alan Modra  <amodra@bigpond.net.au>
 182
 183         * po/POTFILES.in: Regenerate.
 184         * configure: Regenerate.
 185
 186 2001-10-02  Alan Modra  <amodra@bigpond.net.au>
 187
 188         * Makefile.am (Makefile): Depend on bfd/configure.in.
 189         Run "make dep-am".
 190         * Makefile.in: Regenerate.
 191
 192 2001-09-30  John Healy  <jhealy@redhat.com>
 193
 194         * cgen-ibld.in (insert_1): Switched bfd_get_bits and bfd_set_bits
 195         calls to cgen_get_insn_value and cgen_put_insn_value calls.
 196         (extract_1): Switched bfd_get_bits call to cgen_get_insn_value call.
 197
 198 2001-09-30  Hans-Peter Nilsson  <hp@bitrange.com>
 199
 200         * Makefile.am: Update dependencies with "make dep-am".
 201         * Makefile.in: Regenerate.
 202
 203 2001-09-26  Alan Modra  <amodra@bigpond.net.au>
 204
 205         * arc-dis.c: Formatting fixes.
 206         (my_sprintf): Define using VPARAMS, VA_OPEN, VA_FIXEDARG, VA_CLOSE.
 207
 208 2001-09-21  Bruno Haible  <haible@clisp.cons.org>
 209
 210         * arc-dis.c: Don't include <ctype.h>.
 211         * openrisc-desc.c: Likewise.
 212         * openrisc-ibld.c: Likewise.
 213
 214 2001-09-20  Nick Clifton  <nickc@cambridge.redhat.com>
 215
 216         * fr30-opc.c: Fix compile time warning messages.
 217         * i370-opc.c: Fix compile time warning messages.
 218         * i960-dis.c: Fix compile time warning messages.
 219         * m32r-asm.c: Fix compile time warning messages.
 220         * m32r-desc.c: Fix compile time warning messages.
 221         * m32r-dis.c: Fix compile time warning messages.
 222         * m32r-ibld.c: Fix compile time warning messages.
 223         * m32r-opc.c: Fix compile time warning messages.
 224         * m32r-opinst.c: Fix compile time warning messages.
 225         * ns32k-dis.c: Fix compile time warning messages.
 226         * openrisc-asm.c: Fix compile time warning messages.
 227         * openrisc-desc.c: Fix compile time warning messages.
 228         * openrisc-dis.c: Fix compile time warning messages.
 229         * openrisc-ibld.c: Fix compile time warning messages.
 230         * openrisc-opc.c: Fix compile time warning messages.
 231         * pdp11-dis.c: Fix compile time warning messages.
 232         * tic54x-dis.c: Fix compile time warning messages.
 233         * v850-opc.c: Fix compile time warning messages.
 234         * vax-dis.c: Fix compile time warning messages.
 235         * w65-opc.h: Fix compile time warning messages.
 236         * z8k-opc.h: Fix compile time warning messages.
 237         * z8kgen.c: Fix compile time warning messages.
 238
 239 2001-09-19  Nick Clifton  <nickc@cambridge.redhat.com>
 240
 241         * arm-dis.c:   Fix compile time warning messages.
 242         * cgen-asm.c:  Fix compile time warning messages.
 243         * cgen-dis.c:  Fix compile time warning messages.
 244         * cris-dis.c:  Fix compile time warning messages.
 245         * d10v-dis.c:  Fix compile time warning messages.
 246         * fr30-asm.c:  Fix compile time warning messages.
 247         * fr30-desc.c: Fix compile time warning messages.
 248         * fr30-dis.c:  Fix compile time warning messages.
 249         * fr30-ibld.c: Fix compile time warning messages.
 250
 251 2001-09-18  Bruno Haible  <haible@clisp.cons.org>
 252
 253         * cgen-asm.c: Include "safe-ctype.h" instead of <ctype.h>.
 254         (cgen_parse_keyword): Use ISALNUM instead of isalnum.
 255         * cgen-opc.c: Include "safe-ctype.h" instead of <ctype.h>.
 256         (cgen_keyword_lookup_name): Use ISALPHA/TOLOWER instead of
 257         isalpha/tolower.
 258         (cgen_keyword_add): Use ISALNUM instead of isalnum.
 259         (hash_keyword_name): Use TOLOWER instead of tolower.
 260         * fr30-asm.c: Include "safe-ctype.h" instead of <ctype.h>.
 261         (parse_insn_normal): Use TOLOWER/ISSPACE instead of
 262         tolower/isspace.
 263         (fr30_cgen_assemble_insn): Use ISSPACE instead of isspace.
 264         * fr30-desc.c: Don't include <ctype.h>.
 265         * fr30-ibld.c: Likewise.
 266         * ia64-gen.c: Include "safe-ctype.h" instead of <ctype.h>.
 267         (load_insn_classes, parse_resource_users, load_depfile): Use
 268         ISSPACE instead of isspace.
 269         * m32r-asm.c: Include "safe-ctype.h" instead of <ctype.h>.
 270         (parse_insn_normal): Use TOLOWER/ISSPACE instead of
 271         tolower/isspace.
 272         (m32r_cgen_assemble_insn): Use ISSPACE instead of isspace.
 273         * m32r-desc.c: Don't include <ctype.h>.
 274         * m32r-ibld.c: Likewise.
 275         * openrisc-asm.c: Include "safe-ctype.h" instead of <ctype.h>.
 276         (parse_insn_normal): Use TOLOWER/ISSPACE instead of
 277         tolower/isspace.
 278         (openrisc_cgen_assemble_insn): Use ISSPACE instead of isspace.
 279
 280 2001-09-18  Martin Schwidefsky <schwidefsky@de.ibm.com>
 281
 282         * Makefile.am: Add rules and dependencies to create the s/390 opcode
 283         table out of s390-opc.txt automatically.
 284         * configure.in: Add BFD_CC_FOR_BUILD to allow CC_FOR_BUILD to be used.
 285         * s390-mkopc.c (dumpTable): Change output to create a complete file.
 286         * s390-opc.c: New improved opcode format macros and remove the
 287         pregenerated opcode table.
 288         * s390-opc.txt: Adapt to new improved opcode format macros.
 289
 290 2001-09-14  David Schleef <ds@schleef.org>
 291
 292         * ppc-opc.c (VXA, VXA_MASK): Fix mask bits.
 293
 294 2001-09-04  Alan Modra  <amodra@bigpond.net.au>
 295
 296         * i386-dis.c (grps): Don't print the implicit al/ax/eax register
 297         for opcode 0xf6 or 0xf7 forms of mul, imul, div, idiv insns.
 298
 299 2001-08-31  Eric Christopher  <echristo@redhat.com>
 300             Jason Eckhardt    <jle@redhat.com>
 301
 302         * mips-dis.c: Add support for bfd_mach_mipsisa32 and
 303         bfd_mach_mipsisa64. Remove bfd_mach_mips32, bfd_mach_mips32_4k,
 304         bfd_mach_mips64.
 305
 306 2001-08-31  Andreas Jaeger  <aj@suse.de>
 307
 308         * tic54x-opc.c: Add default initializers to avoid warnings.
 309
 310         * arc-opc.c: Include "sysdep.h" to get stdio.h as include file.
 311         * arc-ext.c: Likewise.
 312
 313 2001-08-28  matthew gren  <mrg@redhat.com>
 314
 315         * ppc-opc.c (icbt): Order correctly.
 316
 317 2001-08-27  David Edelsohn  <dje@watson.ibm.com>
 318             Torbjorn Granlund  <tege@swox.com>
 319
 320         * ppc-opc.c (DS): Add PPC_OPERAND_DS flag.
 321         (LS): Define.
 322         (insert_ds): Complain if not a multiple of 4.
 323         (XSYNC): Define.
 324         (XSYNC_MASK): Define.
 325         (powerpc_opcodes): Add "slbmte", "lwsync", "ptesync", "slbmfev",
 326         "slbmfee".  Modify "sync" to use XSYNC_MASK and LS.
 327
 328 2001-08-26  Andreas Jaeger  <aj@suse.de>
 329
 330         * h8500-opc.h: Add default initializers to h8500_table to shut up
 331         GCC warnings.
 332
 333 2001-08-25  Andreas Jaeger  <aj@suse.de>
 334
 335         * tic54x-dis.c: Add unused attributes where needed.
 336
 337         * z8k-dis.c (output_instr): Add unused attribute.
 338
 339         * h8300-dis.c: Add missing prototypes.
 340         (bfd_h8_disassemble): Make static.
 341
 342         * cris-dis.c: Add missing prototype.
 343         * h8500-dis.c: Likewise.
 344         * m68hc11-dis.c: Likewise.
 345         * pj-dis.c: Likewise.
 346         * tic54x-dis.c: Likewise.
 347         * v850-dis.c: Likewise.
 348         * vax-dis.c: Likewise.
 349         * w65-dis.c: Likewise.
 350         * z8k-dis.c: Likewise.
 351
 352         * d10v-dis.c: Add missing prototype.
 353         (dis_long): Remove unused variable.
 354         (dis_2_short): Likewise.
 355
 356         * sh-dis.c: Add missing prototypes.
 357         * v850-opc.c: Likewise.
 358         Add unused attributes where needed.
 359
 360         * ns32k-dis.c: Add missing prototypes.
 361         (bit_extract_simple): Remove unused variable.
 362
 363 2001-08-23  Martin Schwidefsky  <schwidefsky@de.ibm.com>
 364
 365         * opcodes/s390-opc.c: Add "low or high" and "not low or high"
 366         branch instructions for gcc 3.0.
 367         * opcodes/s390-opc.txt: Likewise.
 368
 369 2001-08-21  Andreas Jaeger  <aj@suse.de>
 370
 371         * i960-dis.c: Add parameters for prototypes
 372         (ctrl): Add unused attributes.
 373         (cobr): Likewise.
 374         (put_abs): Likewise.
 375
 376         * mips-dis.c: Add missing prototypes.
 377         * a29k-dis.c: Likewise.
 378         * arc-dis.c: Likewise.
 379         * ia64-opc.c: Likewise.
 380
 381         * s390-dis.c: Add missing prototypes.
 382         (init_disasm): Remove unused attribute since the parameter is
 383         used.
 384
 385 2001-08-16  Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
 386
 387         * mips-opc.c (M1): Define. Reformatted Code.
 388         (mips_builtin_opcodes): Added performance counter opcodes mfpc, mfps,
 389         mtps, mtps. Typo.
 390
 391 2001-08-16  Jonathan Larmour  <jlarmour@redhat.com>
 392
 393         * mips-opc.c: R3900s can support all branch likely INSN_MACROs where
 394         the corresponding non-likely insn is in MIPS I.
 395
 396 2001-08-13  Kazu Hirata  <kazu@hxi.com>
 397
 398         * mcore-dis.c: Fix formatting.
 399         * mips-dis.c: Likewise.
 400         * pj-dis.c: Likewise.
 401         * z8k-dis.c: Likewise.
 402
 403 2001-08-12  Richard Henderson  <rth@redhat.com>
 404
 405         * cgen-ibld.in (extract_normal): Match type of VALUE and MASK
 406         to *VALUEP.  Regenerate all cgen files.
 407
 408 2001-08-10  Richard Sandiford  <rsandifo@redhat.com>
 409
 410         * mips-dis.c (print_insn_mips): Remove OPCODE_IS_MEMBER's gp32
 411         argument.
 412         * mips-opc.c (G6): Undefine.
 413         (mips_builtin_opcodes): Remove gp32 entry for "move".  Add macro
 414         as the first "move" alternative.
 415
 416 2001-08-10  Andreas Jaeger  <aj@suse.de>
 417
 418         * configure.in: Add -Wstrict-prototypes and -Wmissing-prototypes
 419         to build warnings.
 420         * configure: Regenerate.
 421
 422 2001-08-10  Alan Modra  <amodra@bigpond.net.au>
 423
 424         * ppc-opc.c: Revert 2001-08-08.
 425
 426 2001-08-09  Alan Modra  <amodra@bigpond.net.au>
 427
 428         * dis-buf.c (generic_strcat_address): Add missing prototype.
 429         #if 0 the functions as it is unused.
 430
 431 2001-08-08  Alan Modra  <amodra@bigpond.net.au>
 432
 433         1999-10-25  Torbjorn Granlund  <tege@swox.com>
 434         * ppc-opc.c: Include "bfd.h".
 435         (powerpc_operands): Add new field for reloc type.
 436
 437 2001-07-21  Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
 438
 439         * mips-dis.c (print_insn_arg): Don't use software integer registers
 440         for coprocessor registers.
 441         (get_mips_isa): Removed.
 442         (is_newabi): New function, checks if NewABI is used.
 443         (_print_insn_mips): Get distinction between old ABI and new ABI right.
 444
 445 2001-08-01  Christian Groessler <cpg@aladdin.de>
 446
 447         * z8kgen.c: Fixed indentation of opt[] array.  Include stdio.h to
 448         get stderr definition.
 449         (internal, gas): Removed warnings.
 450         (gas): Create a correct final entry for created array.
 451         * z8k-opc.h: Recreated with new z8kgen.
 452
 453 2001-07-28  Kazu Hirata  <kazu@hxi.com>
 454
 455         * i386-dis.c: Fix formatting.
 456
 457 2001-07-28  Matthias Kramm <kramm@quiss.org>
 458
 459         * i386-dis.c: Change formatting conventions for architecture
 460         i386:intel to better match the format of various intel i386
 461         assemblers, like nasm, tasm or masm.
 462
 463 2001-07-24  Alan Modra  <amodra@bigpond.net.au>
 464
 465         * Makefile.am: Update dependencies with "make dep-am".
 466         * Makefile.in: Regenerate
 467
 468 2001-07-24  Kazu Hirata  <kazu@hxi.com>
 469
 470         * alpha-dis.c: Fix formatting.
 471         * cris-dis.c: Likewise.
 472         * d10v-dis.c: Likewise.
 473         * d30v-dis.c: Likewise.
 474         * m10300-dis.c: Likewise.
 475         * tic54x-dis.c: Likewise.
 476
 477 2001-07-23  Kazu Hirata  <kazu@hxi.com>
 478
 479         * m68k-dis.c: Fix formatting.
 480         * pj-dis.c: Likewise.
 481         * s390-dis.c: Likewise.
 482         * z8k-dis.c: Likewise.
 483
 484 2001-07-21  Chris Demetriou  <cgd@broadcom.com>
 485
 486         * mips-opc.c (mips_builtin_opcodes): Sort c.le.s and c.lt.s
 487         into the rest of the surrounding definitions.
 488
 489 2001-07-18  Alan Modra  <amodra@bigpond.net.au>
 490
 491         * i386-dis.c (grps): Print l or w suffix, and require mem modrm
 492         for lgdt, lidt, sgdt, sidt.
 493
 494 2001-07-13  Philip Blundell  <philb@gnu.org>
 495
 496         * arm-dis.c (print_insn_arm): Use decimal for offsets in LDR/STR.
 497
 498 2001-07-12  Jeff Johnston  <jjohnstn@redhat.com>
 499
 500         * cgen-asm.in: Include "xregex.h" always to enable the libiberty
 501         regex support.
 502         (@arch@_cgen_build_insn_regex): New routine from Graydon.
 503         (@arch@_cgen_assemble_insn): Add Graydon's code to use regex
 504         to verify if it is worth parsing the insn as insn "x".  Also update
 505         error message when insn is not a recognized format of the insn vs
 506         when the insn is completely unrecognized.
 507
 508 2001-07-11  Frank Ch. Eigler  <fche@redhat.com>
 509
 510         * cgen-dis.in (print_insn): Use cgen_get_insn_value instead of
 511         bfd_get_bits.
 512         * cgen-opc.c (cgen_get_insn_value, cgen_put_insn_value): Respect
 513         non-zero CGEN_CPU_DESC->insn_chunk_bitsize.
 514
 515 2001-07-09  Andreas Jaeger  <aj@suse.de>, Karsten Keil <kkeil@suse.de>
 516
 517         * i386-dis.c (set_op): Handle 64 bit and 32 bit mode.
 518         (OP_J): Use bfd_vma for mask to work properly with 64 bits.
 519         (op_address,op_riprel): Use bfd_vma to handle 64 bits.
 520
 521 2001-07-05  Ben Elliston  <bje@redhat.com>
 522
 523         * Makefile.am (CPUDIR): Define.
 524         (stamp-m32r): Update dependencies.
 525         (stamp-fr30): Ditto.
 526         (stamp-openrisc): Ditto.
 527         * Makefile.in: Regenerate.
 528
 529 2001-07-03  Zoltan Hidvegi <hzoli@hzoli.2y.net>
 530
 531         * ppc-opc.c: Fix encoding of 'clf' instruction.
 532
 533 2001-06-30  Geoffrey Keating  <geoffk@redhat.com>
 534
 535         * cgen-ibld.in (insert_normal): Support CGEN_IFLD_SIGN_OPT.
 536
 537 2001-06-28  Geoffrey Keating  <geoffk@redhat.com>
 538
 539         * cgen-asm.c (cgen_parse_keyword): Allow any first character.
 540         * cgen-opc.c (cgen_keyword_add): Ignore special first
 541         character when building nonalpha_chars field.
 542
 543 2001-06-24  Ben Elliston  <bje@redhat.com>
 544
 545         * m88k-dis.c: Format to conform to GNU coding standards.
 546
 547 2001-06-23  Andreas Jaeger  <aj@suse.de>
 548
 549         * disassemble.c (disassembler_usage): Add unused attribute.
 550
 551 2001-06-22  Eric Christopher  <echristo@redhat.com>
 552
 553         * mips-opc.c: Move prefx to start of the table.
 554
 555 2001-06-22  Stacey Sheldon <ssheldon@Catena.com>
 556
 557         * arc-opc.c (insert_st_syntax): Fix over-optimisation of ST
 558         instruction.
 559
 560 2001-06-22  Pauli <pauli@moreton.com.au>
 561
 562         * m68k-opc.c: Add wdebug instruction.
 563
 564 2001-06-15  Aldy Hernandez  <aldyh@redhat.com>
 565
 566         * m10300-opc.c (mn10300_opcodes): Change opcode for AM33 subc.
 567
 568 2001-06-14  Geoffrey Keating  <geoffk@redhat.com>
 569
 570         * cgen-asm.c (cgen_parse_keyword): When looking for the
 571         boundaries of a keyword, allow any special characters
 572         that are actually in one of the allowed keyword.
 573         * cgen-opc.c (cgen_keyword_add): Add any special characters
 574         to the nonalpha_chars field.
 575
 576 2001-06-12  Martin Schwidefsky <schwidefsky@de.ibm.com>
 577
 578         * s390-opc.c: Add lgh instruction.
 579         * s390-opc.txt: Likewise.
 580
 581 2001-06-11  Alan Modra  <amodra@bigpond.net.au>
 582
 583         * i386-dis.c: Group function prototypes in one place.
 584         (FLOATCODE): Redefine as 1.
 585         (USE_GROUPS): Redefine as 2.
 586         (USE_PREFIX_USER_TABLE): Redefine as 3.
 587         (X86_64_SPECIAL): Define as 4.
 588         (GRP1b..GRPAMD): Move USE_GROUPS to bytecode1, index to bytecode2.
 589         (PREGRP0..PREGRP26): Similarly with USE_PREFIX_USER_TABLE.
 590         (dis386_att, dis386_intel, disx86_64_att, disx86_64_intel): Delete.
 591         (dis386): New table combining above four tables.
 592         (dis386_twobyte_att, dis386_twobyte_intel): Delete.
 593         (dis386_twobyte): New table combining above two tables.
 594         (x86_64_table): New table to handle x86_64.
 595         (X86_64_0): Define.
 596         (float_mem_att, float_mem_intel): Delet.
 597         (float_mem): New table combining above two tables.
 598         (print_insn_i386): Modify for above.
 599         (dofloat): Likewise.
 600         (putop): Handle '{', '|' and '}' to select alternative mnemonics.
 601         Return 0 on success, 1 if no valid alternative.
 602         (putop <case 'F'>, <case 'H'>): Print nothing for intel_syntax.
 603         (putop <case 'T'>): Move to case 'U', and share case 'Q' code.
 604         (putop <case 'I'>): Move to case 'T', and share case 'P' code.
 605         (OP_REG <case rAX_reg .. rDI_reg>): Handle as for eAX_reg .. eDI_reg
 606         if not 64-bit mode.
 607         (OP_I <case q_mode>): Handle as for v_mode if not 64-bit mode.
 608         (OP_I64): If not 64-bit mode, call OP_I.
 609         OP_OFF64): If not 64-bit mode, call OP_OFF.
 610         (OP_ST, OP_STi, OP_SEG, OP_DIR, OP_OFF, OP_OFF64, OP_MMX): Rename
 611         'ignore'/'ignored' to 'bytemode'.
 612
 613 2001-06-10  Alan Modra  <amodra@bigpond.net.au>
 614
 615         * configure.in: Sort 'ta' case statement.
 616         * configure: Regenerate.
 617
 618         * i386-dis.c (dis386_att): Add 'H' to conditional branch and
 619         loop,jcxz insns.
 620         (disx86_64_att): Likewise.
 621         (dis386_twobyte_att): Likewise.
 622         (print_insn_i386): Don't print branch hints as a prefix.
 623         (putop): 'H' macro prints branch hints.
 624         (get64): Kill compile warnings.
 625
 626 2001-06-09  Alexandre Oliva  <aoliva@redhat.com>
 627
 628         * sh-opc.h (sh_table): Don't use empty initializers.
 629
 630 2001-06-06  Christian Groessler <cpg@aladdin.de>
 631
 632         * z8k-dis.c: Fix formatting.
 633         (unpack_instr): Remove unused cases in switch statement. Add
 634         safety abort() in default case.
 635         (unparse_instr): Add safety abort() in default case.
 636
 637 2001-06-06  Peter Jakubek <pjak@snafu.de>
 638
 639         * m68k-dis.c (print_insn_m68k): Fix typo.
 640         * m68k-opc.c (m68k_opcodes): Correct allowed operands for
 641         mcf (ColdFire) div, rem and moveb instructions.
 642
 643 2001-06-06  Alan Modra  <amodra@bigpond.net.au>
 644
 645         * i386-dis.c (cond_jump_flag, loop_jcxz_flag): Define.
 646         (cond_jump_mode, loop_jcxz_mode): Define.
 647         (dis386_att): Add cond_jump_flag and loop_jcxz_flag as
 648         appropriate, and 'F' suffix to loop insns.
 649         (disx86_64_att): Likewise.
 650         (dis386_twobyte_att): Likewise.
 651         (print_insn_i386): Don't output addr prefix for loop, jcxz insns.
 652         Output data size prefix for long conditional jumps.  Output cs and
 653         ds branch hints.
 654         (putop): Handle 'F', and mark PREFIX_ADDR used for case 'E'.
 655         (OP_J): Don't make PREFIX_DATA used.
 656
 657 2001-06-04  Alexandre Oliva  <aoliva@redhat.com>
 658
 659         * sh-opc.h (sh_table): Complete last element entry to avoid
 660         compiler warning.
 661
 662 2001-05-16  Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
 663
 664         * mips-dis.c (mips_isa_type): Add MIPS r12k support.
 665
 666 2001-05-23  Alan Modra  <amodra@one.net.au>
 667
 668         * arc-opc.c: Whitespace changes.
 669
 670 2001-05-18  Hans-Peter Nilsson  <hp@axis.com>
 671
 672         * cris-opc.c (cris_spec_regs): Add missing initializer field for
 673         last element.
 674
 675 2001-05-15  Frank Ch. Eigler  <fche@redhat.com>
 676
 677         * cgen-dis.in (extract_normal): Complete support for min<base case.
 678
 679 2001-05-15  Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
 680
 681         * mips-dis.c (INSNLEN): Rename MAXLEN.
 682         (std_reg_names): Replace by mips32_reg_names and mips64_reg_names.
 683         (print_insn_arg): Remove $ prefix of register names.
 684         (set_mips_isa_type): Remove.
 685         (mips_isa_type): New function.
 686         (get_mips_isa): New Function.
 687         (print_insn_mips): Rename _print_insn_mips.
 688         (_print_insn_mips): New function, contains code which was
 689         duplicated in print_insn_big_mips and print_insn_little_mips.
 690         (print_insn_big_mips): Moved code to _print_insn_mips.
 691         (print_insn_little_mips): Likewise.
 692         (print_mips16_insn_arg): Remove $ prefix of register names.
 693         Print error message before abort.
 694
 695 2001-05-14  J.T. Conklin  <jtc@redback.com>
 696
 697         * ppc-opc.c (powerpc_opcodes): Fixed extended opcode field of
 698         simplified mnemonics used for setting PPC750-specific special
 699         purpose registers.
 700
 701 2001-05-12  H.J. Lu  <hjl@gnu.org>
 702
 703         * i386-dis.c (print_insn_i386): Always set `mod', `reg' and
 704         `rm'.
 705
 706 2001-05-12  Peter Targett  <peter.targett@arccores.com>
 707
 708         * arc-opc.c (arc_reg_names): Correct attribute for lp_count
 709         register to r/w.  Formatting fixes throughout file.
 710
 711 2001-05-12  Alan Modra  <amodra@one.net.au>
 712
 713         * i386-dis.c (prefix_user_table): Correct movq2dq, movdq2q, and
 714         movq operands.
 715         (twobyte_has_modrm): Update table.
 716         (need_modrm): Give it file scope.
 717         (MODRM_CHECK): Define.
 718         (dofloat): Use MODRM_CHECK.
 719         (OP_E): Likewise.
 720         (OP_EM): Likewise.
 721         (OP_EX): Likewise.
 722
 723 2001-05-07  Frank Ch. Eigler  <fche@redhat.com>
 724
 725         * cgen-dis.in (default_print_insn): Tolerate min<base instructions
 726         even at end of a section.
 727         * cgen-ibld.in (extract_normal): Tolerate min!=base!=max instructions
 728         by ignoring precariously-unpacked insn_value in favor of raw buffer.
 729
 730 2001-05-03  Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
 731
 732         * disassemble.c (disassembler_usage): Remove unused attribute.
 733
 734 2001-05-04  Frank Ch. Eigler  <fche@redhat.com>
 735
 736         * m32r-dis.c, -asm.c, -ibld.c: Regenerated with disassembler fixes.
 737
 738 2001-05-04  Frank Ch. Eigler  <fche@redhat.com>
 739
 740         * cgen-dis.in (print_insn): Remove call to read_insn.  Instead,
 741         assume incoming buffer already has the base insn loaded.  Handle
 742         smaller-than-base instructions for variable-length case.
 743
 744 2001-05-04  Alan Modra  <amodra@one.net.au>
 745
 746         * i386-dis.c (Ev, Ed): Remove duplicate define.
 747         (Gd): Define.
 748         (XS): Define.
 749         (OP_XS): New function.
 750         (dis386_twobyte_att): Correct pinsrw, pextrw, pmovmskb, and
 751         movmskp operands.
 752         (dis386_twobyte_intel): Likewise.
 753         (prefix_user_table): Use MS for maskmovq operand.
 754
 755 2001-04-27  Johan Rydberg  <jrydberg@opencores.org>
 756
 757         * Makefile.am: Add OpenRISC target.
 758         * Makefile.in: Regenerated.
 759
 760         * disassemble.c (disassembler): Recognize the OpenRISC disassembly.
 761
 762         * configure.in (bfd_openrisc_arch): Add target.
 763         * configure: Regenerated.
 764
 765         * openrisc-asm.c: New file.
 766         * openrisc-desc.c: Likewise.
 767         * openrisc-desc.h: Likewise.
 768         * openrisc-dis.c: Likewise.
 769         * openrisc-ibld.c: Likewise.
 770         * openrisc-opc.c: Likewise.
 771         * openrisc-opc.h: Likewise.
 772
 773 2001-04-24  Christian Groessler  <cpg@aladdin.de>
 774
 775         * z8k-dis.c: add names of control registers (ctrl_names);
 776         (seg_length): provides instruction length fixup for segmented
 777         mode; (unpack_instr): correctly handle ARG_DISP16, ARG_DISP12,
 778         CLASS_0DISP7, CLASS_1DISP7, CLASS_DISP8 and CLASS_PR cases;
 779         (unparse_intr): handle CLASS_PR, print addresses without '#'
 780         * z8k-opc.h: re-created with new z8kgen
 781         * z8kgen.c: merged in fixes which were in existing z8k-opc.h; new
 782         entries for ldctl/ldctlb instruction
 783
 784 2001-04-06  Andreas Jaeger  <aj@suse.de>
 785
 786         * i386-dis.c: Add ffreep instruction.
 787
 788 2001-03-30  Alexandre Oliva  <aoliva@redhat.com>
 789
 790         * ppc-opc.c (insert_mbe): Shift mask initializer as long.
 791
 792 2001-03-24  Alan Modra  <alan@linuxcare.com.au>
 793
 794         * i386-dis.c (PREGRP25): Define.
 795         (dis386_twobyte_att): Use here in place of "movntq" entry.
 796         (dis386_twobyte_intel): Likewise.
 797         (prefix_user_table): Add PREGRP25 entry for "movntq" and "movntdq".
 798         (PREGRP26): Define.
 799         (dis386_twobyte_att): Use here.
 800         (dis386_twobyte_intel): Likewise.
 801         (prefix_user_table): Add PREGRP26 entry for "punpcklqdq".
 802         (prefix_user_table <maskmovdqu>): XM operand, not MX.
 803         (prefix_user_table): Cosmetic changes to "bad" entries.
 804
 805 2001-03-23  Nick Clifton  <nickc@redhat.com>
 806
 807         * mips-opc.c: Remove extraneous whitespace.
 808         * mips-dis.c: Remove extraneous whitespace.
 809
 810 2001-03-22  Ben Elliston  <bje@redhat.com>
 811
 812         * cgen-asm.in (@arch@_cgen_assemble_insn): Move tmp_errmsg
 813         declaration inside CGEN_VERBOSE_ASSEMBLER_ERRORS conditional.
 814         * cgen-ibld.in (put_insn_int_value): Mark cd parameter as unused
 815         to allay a compiler warning.
 816
 817 2001-03-22  Alan Modra  <alan@linuxcare.com.au>
 818
 819         * i386-dis.c (dis386_twobyte_att): Add entries for paddq, psubq.
 820         (dis386_twobyte_intel): Likewise.
 821         (twobyte_has_modrm): Set entry for paddq, psubq.
 822
 823 2001-03-20  Patrick Macdonald  <patrickm@redhat.com>
 824
 825         * cgen-dis.in (print_insn_@arch@): Add support for target machine
 826         determination via CGEN_COMPUTE_MACH.
 827         * fr30-desc.c: Regenerate.
 828         * fr30-dis.c: Regenerate.
 829         * fr30-opc.h: Regenerate.
 830         * m32r-desc.c: Regenerate.
 831         * m32r-dis.c: Regenerate.
 832         * m32r-opc.h: Regenerate.
 833         * m32r-opinst.c: Regenerate.
 834
 835 2001-03-20  H.J. Lu  <hjl@gnu.org>
 836
 837         * configure.in: Remove the redundent AC_ARG_PROGRAM.
 838         * configure: Rebuild.
 839
 840 2001-03-19  Jim Wilson  <wilson@redhat.com>
 841
 842         * ia64-gen.c (fetch_insn_class): If xsect, then ignore comment and
 843         notestr if larger than xsect.
 844         (in_class): Handle format M5.
 845         * ia64-asmtab.c: Regnerate.
 846
 847 2001-03-19  John David Anglin  <dave@hiauly1.hia.nrc.ca>
 848
 849         * vax-dis.c (print_insn_vax): Only fetch two bytes if the info buffer
 850         has more than one byte left to read.
 851
 852 2001-03-16  Martin Schwidefsky  <schwidefsky@de.ibm.com>
 853
 854         * s390-opc.c: Add new opcodes.  Smooth out formatting.
 855         * s390-opc.txt: Add new opcodes.
 856
 857 2001-03-06  Nick Clifton  <nickc@redhat.com>
 858
 859         * arm-dis.c (print_insn_thumb): Compute destination address
 860         of BLX(1) instruction by taking bit 1 from PC and not from bit
 861         0 of the offset.
 862
 863 2001-03-06  Igor Shevlyakov  <igor@windriver.com>
 864
 865         * m68k-dis.c (print_insn_m68k): Recognize Coldfire CPUs
 866         so command line switches will work.
 867
 868 2001-03-05  Dave Brolley  <brolley@redhat.com>
 869
 870         * fr30-asm.c: Regenerate.
 871         * fr30-desc.c: Regenerate.
 872         * fr30-desc.h: Regenerate.
 873         * fr30-dis.c: Regenerate.
 874         * fr30-ibld.c: Regenerate.
 875         * fr30-opc.c: Regenerate.
 876         * fr30-opc.h: Regenerate.
 877         * m32r-asm.c: Regenerate.
 878         * m32r-desc.c: Regenerate.
 879         * m32r-desc.h: Regenerate.
 880         * m32r-dis.c: Regenerate.
 881         * m32r-ibld.c: Regenerate.
 882         * m32r-opc.c: Regenerate.
 883         * m32r-opc.h: Regenerate.
 884         * m32r-opinst.c: Regenerate.
 885
 886 2001-02-28  Igor Shevlyakov  <igor@windriver.com>
 887
 888         * m68k-opc.c: fix cpushl according to Motorola. Enable
 889         bunch of instructions for Coldfire 5407 and add all new.
 890
 891 2001-02-27  Alan Modra  <alan@linuxcare.com.au>
 892
 893         * configure.in (BFD_VERSION): Do without grep.
 894         * configure: Regenerate.
 895         * Makefile.am: Run "make dep-am".
 896         * Makefile.in: Regenerate.
 897
 898 2001-02-23  David Mosberger  <davidm@hpl.hp.com>
 899
 900         * ia64-opc-a.c: Add missing pseudo-ops for "cmp" and "cmp4".
 901         * ia64-asmtab.c: Regenerate.
 902
 903 2001-02-21  David Mosberger  <davidm@hpl.hp.com>
 904
 905         * ia64-opc-d.c (ia64_opcodes_d): Break the "add" pattern into two
 906         separate variants: one for IMM22 and the other for IMM14.
 907         * ia64-asmtab.c: Regenerate.
 908
 909 2001-02-21  Greg McGary  <greg@mcgary.org>
 910
 911         * cgen-opc.c (cgen_get_insn_value): Add missing `return'.
 912
 913 2001-02-20  H.J. Lu  <hjl@gnu.org>
 914
 915         * Makefile.am (ia64-ic.tbl): Remove the target.
 916         (ia64-raw.tbl): Likewise.
 917         (ia64-waw.tbl): Likewise.
 918         (ia64-war.tbl): Likewise.
 919         (ia64-asmtab.c): Generate it in the source directory.
 920         * Makefile.in: Regenerated.
 921
 922 2001-02-18  lars brinkhoff  <lars@nocrew.org>
 923
 924         * Makefile.am: Add PDP-11 target.
 925         * configure.in: Likewise.
 926         * disassemble.c: Likewise.
 927         * pdp11-dis.c: New file.
 928         * pdp11-opc.c: New file.
 929
 930 2001-02-14  Jim Wilson  <wilson@redhat.com>
 931
 932         * ia64-ic.tbl: Update from Intel.  Add setf to fr-writers.
 933         * ia64-asmtab.c: Regenerate.
 934
 935 Mon Feb 12 17:41:26 CET 2001  Jan Hubicka  <jh@suse.cz>
 936
 937         * i386-dis.c (prefix_user_t): Add 'Y' to SSE ineger converison
 938         instructions.
 939         (putop): Handle 'Y'
 940
 941 2001-02-11  Maciej W. Rozycki  <macro@ds2.pg.gda.pl>
 942
 943         * mips-dis.c (print_insn_arg): Use top four bits of the address of
 944         the following instruction not of the jump itself for the jump
 945         target.
 946         (print_mips16_insn_arg): Likewise.
 947
 948 2001-02-11  Michael Sokolov  <msokolov@ivan.Harhan.ORG>
 949
 950         * Makefile.am (stamp-lib): ranlib the libopcodes.a in the build
 951         directory.
 952         * Makefile.in: Regenerate.
 953
 954 2001-02-09  Schwidefsky  <schwidefsky@de.ibm.com>
 955
 956         * Makefile.am: Add linux target for S/390.
 957         * Makefile.in: Likewise.
 958         * configure.in: Likewise.
 959         * disassemble.c: Likewise.
 960         * s390-dis.c: New file.
 961         * s390-mkopc.c: New file.
 962         * s390-opc.c: New file.
 963         * s390-opc.txt: New file.
 964
 965 2001-02-05  Jim Wilson  <wilson@redhat.com>
 966
 967         * ia64-asmtab.c: Revert 2000-12-16 change.
 968
 969 2001-02-02  Patrick Macdonald  <patrickm@redhat.com>
 970
 971         * fr30-desc.h: Regenerate with CGEN_MAX_SYNTAX_ELEMENTS.
 972         * m32r-desc.h: Regenerate.
 973
 974 Thu Feb  1 16:29:06 MET 2001  Jan Hubicka  <jh@suse.cz>
 975
 976         * i386-dis.c (dis386_att, grps): Use 'T' for push/pop
 977         (putop): Handle 'T', alphabetize order, fix 'I' handling in Intel syntax
 978
 979 2001-01-14  Alan Modra  <alan@linuxcare.com.au>
 980
 981         * hppa-dis.c (print_insn_hppa): Handle '>' and '<' arg types.
 982
 983 2001-01-13  Nick Clifton  <nickc@redhat.com>
 984
 985         * disassemble.c: Remove spurious white space.
 986
 987 Sat Jan 13 01:48:24 MET 2001  Jan Hubicka  <jh@suse.cz>
 988
 989         * i386-dis.c (dis386_att, disx86_64_att): Fix ret, lret and iret
 990         templates.
 991
 992 2001-01-11  Peter Targett  <peter.targett@arccores.com>
 993
 994         * configure.in: Add arc-ext.lo for bfd_arc_arch selection.
 995         * Makefile.am (C_FILES): Add arc-ext.c.
 996         (ALL_MACHINES) Add arc-ext.lo.
 997         (INCLUDES) Add opcode directory to list.
 998         New dependency entry for arc-ext.lo.
 999         * disassemble.c (disassembler): Correct call to
1000         arc_get_disassembler.
1001         * arc-opc.c: New update for ARC, including full base
1002         instructions for ARC variants.
1003         * arc-dis.h, arc-dis.c: New update for ARC, including
1004         extensibility functionality.
1005         * arc-ext.h, arc-ext.c: New files for handling extensibility.
1006
1007 2001-01-10  Jan Hubicka  <jh@suse.cz>
1008
1009         * i386-dis.c (PREGRP15 - PREGRP24): New.
1010         (dis386_twobyt): Add SSE2 instructions.
1011         (twobyte_uses_SSE_prefix: Rename from ... ; add new SSE instructions.
1012         (twobyte_uses_f3_prefix): ... this one.
1013         (grps): Add SSE instructions.
1014         (prefix_user_table): Add two new slots; add SSE2 instructions.
1015         (print_insn_i386): Rename uses_f3_prefix to uses_SSE_prefix;
1016         Handle the REPNZ and Data16 prefixes as well; do proper lookup
1017         to prefix_user_table.
1018         (OP_E): Accept mfence and lfence as well.
1019         (OP_MMX): Data16 prefix turns MMX to SSE; support REX extensions.
1020         (OP_XMM): Support REX extensions.
1021         (OP_EM): Likewise.
1022         (OP_EX): Likewise.
1023
1024 2001-01-09  Nick Clifton  <nickc@redhat.com>
1025
1026         * arm-dis.c (print_insn): Set pc to zero for instructions with
1027         a reloc associated with them.
1028
1029 2001-01-09  Jeff Johnston  <jjohnstn@redhat.com>
1030
1031         * cgen-asm.in (parse_insn_normal): Changed syn to be
1032         CGEN_SYNTAX_CHAR_TYPE.  Changed all references to *syn
1033         as character to use CGEN_SYNTAX_CHAR macro and all comparisons
1034         to '\0' to use 0 instead.
1035         * cgen-dis.in (print_insn_normal): Ditto.
1036         * cgen-ibld.in (insert_insn_normal, extract_insn_normal): Ditto.
1037
1038 2001-01-05  Jan Hubicka  <jh@suse.cz>
1039
1040         * i386-dis.c: Add x86_64 support.
1041         (rex): New static variable.
1042         (REX_MODE64, REX_EXTX, REX_EXTY, REX_EXTZ): New constants.
1043         (USED_REX): New macro.
1044         (Ev, Ed, Rm, Iq, Iv64, Cm, Dm, Rm*, Ob64, Ov64): New macros.
1045         (OP_I64, OP_OFF64, OP_IMREG): New functions.
1046         (OP_REG, OP_OFF): Declare.
1047         (get64, get32, get32s): New functions.
1048         (r??_reg): New constants.
1049         (dis386_att): Change templates of instruction implicitly promoted
1050         to 64bit; change e?? to RMe?? for unwind RM byte instructions.
1051         (grps): Likewise.
1052         (dis386_intel): Likewise.
1053         (dixx86_64_att): New table based on dis386_att.
1054         (dixx86_64_intel): New table based on dis386_intel.
1055         (names64, names8rex): New global variable.
1056         (names32, names16): Add extended registers.
1057         (prefix_user_t): Recognize rex prefixes.
1058         (prefix_name): Print REX prefixes nicely.
1059         (op_riprel): New global variable.
1060         (start_pc): Set type to bfd_vma.
1061         (print_insn_i386): Detect the 64bit mode and use proper table;
1062         move ckprefix after initializing the buffer; output unused rex prefixes;
1063         output information about target of RIP relative addresses.
1064         (putop): Support 'O' and 'I'. Update handling of "P', 'Q', 'R' and 'S';
1065         (print_operand_value): New function.
1066         (OP_E, OP_G, OP_REG, OP_I, OP_J, OP_DIR, OP_OFF, OP_D): Add support for
1067         REX prefix and new modes.
1068         (get64, get32s): New.
1069         (get32): Return bfd_signed_vma type.
1070         (set_op): Initialize the op_riprel.
1071         * disassemble.c (disassembler): Recognize the x86-64 disassembly.
1072
1073 2001-01-03  Richard Sandiford  <r.sandiford@redhat.com>
1074
1075          cgen-dis.in (read_insn): Use bfd_get_bits()
1076
1077 2001-01-02  Richard Sandiford  <rsandifo@redhat.com>
1078
1079         * cgen-dis.c (hash_insn_array): Use bfd_put_bits().
1080         (hash_insn_list): Likewise
1081         * cgen-ibld.in (insert_1): Use bfd_put_bits() and bfd_get_bits().
1082         (extract_1): Use bfd_get_bits().
1083         (extract_normal): Apply sign extension to both extraction
1084         methods.
1085         * cgen-opc.c (cgen_get_insn_value): Use bfd_get_bits()
1086         (cgen_put_insn_value): Use bfd_put_bits()
1087
1088 2000-12-28  Frank Ch. Eigler  <fche@redhat.com>
1089
1090         * cgen-asm.in (parse_insn_normal): Print better error message for
1091         instructions with missing operands.
1092
1093 2000-12-21  Santeri Paavolainen <santtu@ssh.com>
1094
1095         * cgen-opc.c: Include alloca.h if HAVE_ALLOCA_H is defined.
1096
1097 2000-12-16  Nick Clifton  <nickc@redhat.com>
1098
1099         * Makefile.in: Regenerate.
1100         * aclocal.m4: Regenerate.
1101         * config.in: Regenerate.
1102         * configure.in: Add spacing.
1103         * configure: Regenerate.
1104         * ia64-asmtab.c: Regenerate.
1105         * po/opcodes.pot: Regenerate.
1106
1107 2000-12-12  Frank Ch. Eigler  <fche@redhat.com>
1108
1109         * cgen-asm.in (@arch@_cgen_assemble_insn): Prefer printing insert-time
1110         error messages over later parse-time ones.
1111
1112 2000-12-12  Jim Wilson  <wilson@redhat.com>
1113
1114         * ia64-dis.c (print_insn_ia64): Cast away const on ia64_free_opcode
1115         argument.
1116         * ia64-gen.c (insert_deplist): Cast sizeof result to int.
1117         (print_dependency_table): Print NULL if semantics field not set.
1118         (insert_opcode_dependencies): Mark cmp parameter as unused.
1119         (print_main_table): Use fprintf_vma to print long long fields.
1120         (main): Mark argv paramter as unused.  Convert to old style definition.
1121         * ia64-opc.c (ia64_find_dependency): Cast sizeof result to int.
1122         * ia64-asmtab.c: Regnerate.
1123
1124 2000-12-09  Nick Clifton  <nickc@redhat.com>
1125
1126         * m32r-dis.c (print_insn): Prevent re-read of instruction from
1127         wrong address.
1128
1129         * fr30-dis.c: Regenerate.
1130
1131 2000-12-08  Peter Targett  <peter.targett@arccores.com>
1132
1133         * configure.in: Add arc-ext.lo for bfd_arc_arch selection.
1134         * Makefile.am (C_FILES): Add arc-ext.c.
1135         (ALL_MACHINES) Add arc-ext.lo.
1136         (INCLUDES) Add opcode directory to list.
1137         New dependency entry for arc-ext.lo.
1138         * disassemble.c (disassembler): Correct call to
1139         arc_get_disassembler.
1140         * arc-opc.c: New update for ARC, including full base
1141         instructions for ARC variants.
1142         * arc-dis.h, arc-dis.c: New update for ARC, including
1143         extensibility functionality.
1144         * arc-ext.h, arc-ext.c: New files for handling extensibility.
1145
1146 2000-12-03  Chris Demetriou   cgd@sibyte.com
1147
1148         * mips-opc.c (mips_builtin_opcodes): Use the WR_HILO, RD_HILO,
1149         MOD_HILO, and MOD_LO macros.
1150
1151         * mips-opc.c (M1, M2): Delete.
1152         (mips_builtin_opcodes): Remove all uses of M1.
1153
1154         * mips-opc.c (mips_builtin_opcodes): Make the dmfc2 and dmtc2
1155         instructions take "G" format second operands and use the
1156         correct flags.
1157         There are mfc3 and mtc3 opcodes, so add dmfc3 and dmtc3 opcodes to
1158         match.
1159         Delete "sel" code operands from mfc1 and mtc1.
1160         Add MIPS64 opcode changes (dclo, dclz), and "sel" code variants
1161         for dm[ft]c[023].
1162
1163 2000-12-03  Ed Satterthwaite  ehs@sibyte.com  and
1164             Chris Demetriou   cgd@sibyte.com
1165
1166         * mips-opc.c (mips_builtin_opcodes): Finish additions
1167         for MIPS32 support, and clean up existing entries for
1168         aesthetics, consistency with the MIPS32 ISA, and
1169         with consistency the rest of the table.
1170
1171 2000-12-01  Nick Clifton  <nickc@redhat.com>
1172
1173         * mips16-opc.c (mips16_opcodes): Add initialiser for membership
1174         field.
1175
1176 2000-12-01  Chris Demetriou <cgd@sibyte.com>
1177
1178         mips-dis.c (print_insn_arg): Handle new 'U' and 'J' argument
1179         specifiers.  Update 'B' for new constant names, and remove
1180         'm'.
1181         mips-opc.c (mips_builtin_opcodes): Place "pref" and "ssnop"
1182         near the top of the array, so they are disassembled properly.
1183         Enable "ssnop" for MIPS32.  Add "break" variant with 20 bit
1184         code for MIPS32.  Update "clo" and "clz" to use 'U' operand
1185         specifier.  Add 'H' format specifier variants for "mfc1,"
1186         "mfc2," "mfc3," "mtc1," "mtc2," and "mtc3" for MIPS32.  Update
1187         MIPS32 "sdbbp" to use 'B' operand specifier.  Add MIPS32
1188         "wait" variant which uses 'J' operand specifier.
1189
1190         * mips-dis.c (set_mips_isa_type): Update to use
1191         CPU_UNKNOWN and ISA_* constants.  Add bfd_mach_mips32 case.
1192         Replace bfd_mach_mips4K with bfd_mach_mips32_4k case.
1193         * mips-opc.c (I32): New constant for instructions added in
1194         MIPS32.
1195         (P4): Delete.
1196         (mips_builtin_opcodes) Replace all uses of P4 with I32.
1197
1198         * mips-dis.c (set_mips_isa_type): Add cases for
1199         bfd_mach_mips5 and bfd_mach_mips64.
1200         * mips-opc.c (I64): New definitions.
1201
1202         * mips-dis.c (set_mips_isa_type): Add case for
1203         bfd_mach_mips_sb1.
1204
1205 2000-11-28  Hans-Peter Nilsson  <hp@bitrange.com>
1206
1207         * sh-dis.c (print_insn_ddt): Make insn_x, insn_y unsigned.
1208         (print_insn_ppi): Make nib1, nib2, nib3 unsigned.
1209         Initialize variable dc to NULL.
1210         (print_insn_shx): Remove unused label d_reg_n.
1211
1212 2000-11-24  Nick Clifton  <nickc@redhat.com>
1213
1214         * arm-opc.h: Add new opcode formatting parameter 'B'.
1215         (arm_opcodes): Add XScale, v5, and v5te instructions.
1216         (thumb_opcodes): Add v5t instructions.
1217
1218         * arm-dis.c (print_insn_arm): Handle new 'B' format
1219         parameter.
1220         (print_insn_thumb): Decode BLX(1) instruction.
1221
1222 2000-11-21  Chris Demetriou  <cgd@sibyte.com>
1223
1224         * mips-opc.c: Fix file header comment.
1225
1226 2000-11-14  Hans-Peter Nilsson  <hp@axis.com>
1227
1228         * cris-dis.c (cris_get_disassembler): If abfd is NULL, return
1229         print_insn_cris_with_register_prefix.
1230
1231 2000-11-11  Alexandre Oliva  <aoliva@redhat.com>
1232
1233         * sh-opc.h: The operand of `mov.w r0, (<disp>,GBR)' is IMM1, not 0.
1234
1235 2000-11-07  Matthew Green  <mrg@redhat.com>
1236
1237         * cgen-dis.in (print_insn): All insns which can fit into insn_value
1238         must be loaded there in their entirety.
1239
1240 2000-10-20  Jakub Jelinek  <jakub@redhat.com>
1241
1242         * sparc-dis.c (v9a_asr_reg_names): Add v9b ASRs.
1243         (compute_arch_mask): Add v8plusb and v9b machines.
1244         (print_insn_sparc): siam mode decoding, accept ASRs up to 25.
1245         * sparc-opc.c: Support for Cheetah instruction set.
1246         (prefetch_table): Add #invalidate.
1247
1248 2000-10-16  Nick Clifton  <nickc@redhat.com>
1249
1250         * mcore-dis.c (imsk): Change mask for OC to 0xFE00.
1251
1252 2000-10-06  Dave Brolley  <brolley@redhat.com>
1253
1254         * fr30-desc.h: Regenerate.
1255         * m32r-desc.h: Regenerate.
1256         * m32r-ibld.c: Regenerate.
1257
1258 2000-10-05  Jim Wilson  <wilson@redhat.com>
1259
1260         * ia64-ic.tbl: Update from Intel.
1261         * ia64-asmtab.c: Regenerate.
1262
1263 2000-10-04  Kazu Hirata  <kazu@hxi.com>
1264
1265         * ia64-gen.c: Convert C++-style comments to C-style comments.
1266         * tic54x-dis.c: Likewise.
1267
1268 2000-09-29  Hans-Peter Nilsson  <hp@axis.com>
1269
1270         Changes to add dollar prefix to registers for files where user symbols
1271         don't have a leading underscore.  Fix formatting.
1272         * cris-dis.c (REGISTER_PREFIX_CHAR): New.
1273         (format_reg): Add parameter with_reg_prefix.  All callers changed.
1274         (print_with_operands): Ditto.
1275         (print_insn_cris_generic): Renamed from print_insn_cris, add
1276         parameter with_reg_prefix.
1277         (print_insn_cris_with_register_prefix,
1278         print_insn_cris_without_register_prefix, cris_get_disassembler):
1279         New.
1280         * disassemble.c (disassembler) [ARCH_cris]: Call cris_get_disassembler.
1281
1282 2000-09-22  Jim Wilson  <wilson@redhat.com>
1283
1284         * ia64-opc-f.c (ia64_opcodes_f): Add fpcmp pseudo-ops for
1285         gt, ge, ngt, and nge.
1286         * ia64-asmtab.c: Regenerate.
1287
1288         * ia64-dis.c (print_insn_ia64): Revert Aug 7 byte skip count change.
1289         * ia64-gen.c (parse_semantics): Handle IA64_DVS_STOP.
1290         (lookup_specifier): Handle "PR%, 1 to 15" and "PR%, 16 to 62".
1291         * ia64-ic.tbl, ia64-raw.tbl, ia64-war.tbl, ia64-waw.tbl: Update.
1292         * ia64-asmtab.c: Regnerate.
1293
1294 2000-09-13  Anders Norlander  <anorland@acc.umu.se>
1295
1296         * mips-opc.c (mips_builtin_opcodes): Support cache instruction on 4K cores.
1297         Add mfc0 and mtc0 with sub-selection values.
1298         Add clo and clz opcodes.
1299         Add msub and msubu instructions for MIPS32.
1300         Add madd/maddu aliases for mad/madu for MIPS32.
1301         Support wait, deret, eret, movn, pref for MIPS32.
1302         Support tlbp, tlbr, tlbwi, tlbwr.
1303         (P4): New define.
1304
1305         * mips-dis.c (print_insn_arg): Print sdbbp 'm' args.
1306         (print_insn_arg): Handle 'H' args.
1307         (set_mips_isa_type): Recognize 4K.
1308         Use CPU_* defines instead of hardcoded numbers.
1309
1310 2000-09-11  Catherine Moore <clm@redhat.com>
1311
1312         * d30v-opc.c (d30v_operand_t): New operand type Rb2.
1313         (d30v_format_tab): Use Rb2 for modinc and moddec.
1314
1315 2000-09-07  Catherine Moore  <clm@redhat.com>
1316
1317         * d30v-opc.c (d30v_format_tab): Use format Ra for
1318         modinc and moddec.
1319
1320 2000-09-06  Alexandre Oliva  <aoliva@redhat.com>
1321
1322         * configure: Rebuilt with new libtool.m4.
1323
1324 2000-09-05  Nick Clifton  <nickc@redhat.com>
1325
1326         * configure: Regenerate.
1327         * po/opcodes.pot: Regenerate.
1328
1329 2000-08-31  Alexandre Oliva  <aoliva@redhat.com>
1330
1331         * acinclude.m4: Include libtool and gettext macros from the
1332         top level.
1333         * aclocal.m4, configure: Rebuilt.
1334
1335 2000-08-30  Kazu Hirata  <kazu@hxi.com>
1336
1337         * tic80-dis.c: Fix formatting.
1338
1339 2000-08-29  Kazu Hirata  <kazu@hxi.com>
1340
1341         * w65-dis.c: Fix formatting.
1342
1343 2000-08-28  Mark Hatle  <mhatle@mvista.com>
1344
1345         * ppc-opc.c: Add XTLB macro for a few PPC 4xx extended mnemonics.
1346         (powerpc_opcodes): Add table entries for PPC 405 instructions.
1347         Changed rfci, icbt, mfdcr, dccci, mtdcr, iccci from PPC to PPC403
1348         instructions.  Added extended mnemonic mftbl as defined in the
1349         405GP manual for all PPCs.
1350
1351 2000-08-28  Jim Wilson  <wilson@redhat.com>
1352
1353         * ia64-dis.c (print_insn_ia64): Add failed label after ia64_free_opcode
1354         call.  Change last goto to use failed instead of done.
1355
1356 2000-08-28  Dave Brolley  <brolley@redhat.com>
1357
1358         * cgen-ibld.in (cgen_put_insn_int_value): New function.
1359         (insert_normal): Allow for non-zero word_offset with CGEN_INT_INSN_P.
1360         (insert_insn_normal): Use cgen_put_insn_int_value with CGEN_INT_INSN_P.
1361         (extract_normal): Allow for non-zero word_offset with CGEN_INT_INSN_P.
1362         * cgen-dis.in (read_insn): New static function.
1363         (print_insn): Use read_insn to read the insn into the buffer and set
1364         up for disassembly.
1365         (print_insn): in CGEN_INT_INSN_P, make sure that the entire insn is
1366         in the buffer.
1367         * fr30-asm.c: Regenerated.
1368         * fr30-desc.c: Regenerated.
1369         * fr30-desc.h: Regenerated.
1370         * fr30-dis.c: Regenerated.
1371         * fr30-ibld.c: Regenerated.
1372         * fr30-opc.c: Regenerated.
1373         * fr30-opc.h: Regenerated.
1374         * m32r-asm.c: Regenerated.
1375         * m32r-desc.c: Regenerated.
1376         * m32r-desc.h: Regenerated.
1377         * m32r-dis.c: Regenerated.
1378         * m32r-ibld.c: Regenerated.
1379         * m32r-opc.c: Regenerated.
1380
1381 2000-08-28  Kazu Hirata  <kazu@hxi.com>
1382
1383         * tic30-dis.c: Fix formatting.
1384
1385 2000-08-27  Kazu Hirata  <kazu@hxi.com>
1386
1387         * sh-dis.c: Fix formatting.
1388
1389 2000-08-24  David Edelsohn  <dje@watson.ibm.com>
1390
1391         * ppc-opc.c (powerpc_opcodes): Add rfid, mtsrd, mtsrdin, mtmsrd.
1392
1393 2000-08-24  Kazu Hirata  <kazu@hxi.com>
1394
1395         * z8k-dis.c: Fix formatting.
1396
1397 2000-08-16  Jim Wilson  <wilson@redhat.com>
1398
1399         * ia64-ic.tbl (pr-readers-nobr-nomovpr): Add addl, adds.  Delete
1400         break, mov-immediate, nop.
1401         * ia64-opc-f.c: Delete fpsub instructions.
1402         * ia64-opc-m.c: Add POSTINC to all instructions with postincrement
1403         address operand.  Rewrite using macros to avoid long lines.
1404         * ia64-opc.h (POSTINC): Define.
1405         * ia64-asmtab.c: Regenerate.
1406
1407 2000-08-15  Jim Wilson  <wilson@redhat.com>
1408
1409         * ia64-ic.tbl: Add missing entries.
1410
1411 2000-08-08  Jason Eckhardt  <jle@redhat.com>
1412
1413         * i860-dis.c (print_br_address): Change third argument from int
1414         to long.
1415
1416 2000-08-07  Richard Henderson  <rth@redhat.com>
1417
1418         * ia64-dis.c (print_insn_ia64): Get byte skip count correct
1419         for MLI templates.  Handle IA64_OPND_TGT64.
1420
1421 2000-08-04  Ben Elliston  <bje@redhat.com>
1422
1423         * cgen-dis.in, cgen-asm.in, cgen-ibld.in: New files.
1424         * cgen.sh: Likewise.
1425
1426 2000-08-02  Jim Wilson  <wilson@redhat.com>
1427
1428         * ia64-dis.c (print_insn_ia64): Call ia64_free_opcode at end.
1429
1430 2000-07-29  Marek Michalkiewicz  <marekm@linux.org.pl>
1431
1432         * avr-dis.c (avr_operand): Use PARAMS macro in declaration.
1433         Change return type from void to int.  Check the combination
1434         of operands, return 1 if valid.  Fix to avoid BUF overflow.
1435         Report undefined combinations of operands in COMMENT.
1436         Report internal errors to stderr.  Output the adiw/sbiw
1437         constant operand in both decimal and hex.
1438         (print_insn_avr): Disassemble ldd/std with displacement of 0
1439         as ld/st.  Check avr_operand () return value, handle invalid
1440         combinations of operands like unknown opcodes.
1441
1442 2000-07-28  Ben Elliston  <bje@redhat.com>
1443
1444         * Makefile.am (CGEN, CGENDEPS, CGENDIR, CGENFLAGS): New.
1445         (run-cgen, stamp-m32r, stamp-fr30): New targets.
1446         * Makefile.in: Regenerate.
1447         * configure.in: Add --enable-cgen-maint option.
1448         * configure: Regenerate.
1449
1450 2000-07-26  Dave Brolley  <brolley@redhat.com>
1451
1452         * cgen-opc.c (cgen_hw_lookup_by_name): 'i' is now unsigned.
1453         (cgen_hw_lookup_by_num): Ditto.
1454         (cgen_operand_lookup_by_name): Ditto.
1455         (print_address): Ditto.
1456         (print_keyword): Ditto.
1457         * cgen-dis.c (hash_insn_array): Mark unused parameters with
1458         ATTRIBUTE_UNUSED.
1459         * cgen-asm.c (hash_insn_array): Mark unused parameters with
1460         ATTRIBUTE_UNUSED.
1461         (cgen_parse_keyword): Ditto.
1462
1463 2000-07-22  Jason Eckhardt  <jle@redhat.com>
1464
1465         * i860-dis.c: New file.
1466         (print_insn_i860): New function.
1467         (print_br_address): New function.
1468         (sign_extend): New function.
1469         (BITWISE_OP): New macro.
1470         (I860_REG_PREFIX): New macro.
1471         (grnames, frnames, crnames): New structures.
1472
1473         * disassemble.c (ARCH_i860): Define.
1474         (disassembler): Add check for bfd_arch_i860 to set disassemble
1475         function to print_insn_i860.
1476
1477         * Makefile.in (CFILES): Added i860-dis.c.
1478         (ALL_MACHINES): Added i860-dis.lo.
1479         (i860-dis.lo): New dependences.
1480
1481         * configure.in: New bits for bfd_i860_arch.
1482
1483         * configure: Regenerated.
1484
1485 2000-07-20  Hans-Peter Nilsson  <hp@axis.com>
1486
1487         * Makefile.am (CFILES): Add cris-dis.c and cris-opc.c.
1488         (ALL_MACHINES): Add cris-dis.lo and cris-opc.lo.
1489         (cris-dis.lo, cris-opc.lo): New rules.
1490         * Makefile.in: Rebuild.
1491         * configure.in (bfd_cris_arch): New target.
1492         * configure: Rebuild.
1493         * disassemble.c (ARCH_cris): Define.
1494         (disassembler): Support ARCH_cris.
1495         * cris-dis.c, cris-opc.c: New files.
1496         * po/POTFILES.in, po/opcodes.pot: Regenerate.
1497
1498 2000-07-11  Jakub Jelinek  <jakub@redhat.com>
1499
1500         * sparc-opc.c (sparc_opcodes): popc has 0 in rs1, not rs2.
1501         Reported by Bill Clarke <llib@computer.org>.
1502
1503 2000-07-09  Geoffrey Keating  <geoffk@redhat.com>
1504
1505         * ppc-opc.c (powerpc_opcodes): Correct suffix for vslw.
1506         Patch by Randall J Fisher <rfisher@ecn.purdue.edu>.
1507
1508 2000-07-09  Alan Modra  <alan@linuxcare.com.au>
1509
1510         * hppa-dis.c (fput_reg, fput_fp_reg, fput_fp_reg_r, fput_creg,
1511         fput_const, extract_3, extract_5_load, extract_5_store,
1512         extract_5r_store, extract_5R_store, extract_10U_store,
1513         extract_5Q_store, extract_11, extract_14, extract_16, extract_21,
1514         extract_12, extract_17, extract_22): Prototype.
1515         (print_insn_hppa): Rename inner block opcode -> opc to avoid
1516         shadowing outer block.
1517         (GET_BIT): Define.
1518
1519 2000-07-05  DJ Delorie  <dj@redhat.com>
1520
1521         * MAINTAINERS: new
1522
1523 2000-07-04  Alexandre Oliva  <aoliva@redhat.com>
1524
1525         * arm-dis.c (print_insn_arm): Output combinations of PSR flags.
1526
1527 2000-07-03  Marek Michalkiewicz  <marekm@linux.org.pl>
1528
1529         * avr-dis.c (avr_operand): Change _ () to _() around all strings
1530         marked for translation (exception from the usual coding style).
1531         (print_insn_avr): Initialize insn2 to avoid warnings.
1532
1533 2000-07-03  Kazu Hirata  <kazu@hxi.com>
1534
1535         * h8300-dis.c (bfd_h8_disassemble): Improve readability.
1536         * h8500-dis.c: Fix formatting.
1537
1538 2000-07-01  Alan Modra  <alan@linuxcare.com.au>
1539
1540         * Makefile.am (DEP): Fix 2000-06-22.  grep after running dep.sed
1541         (CLEANFILES): Add DEPA.
1542         * Makefile.in: Regenerate.
1543
1544 2000-06-26  Scott Bambrough  <scottb@netwinder.org>
1545
1546         * arm-dis.c (regnames): Add an additional register set to match
1547         the set used by GCC.  Make it the default.
1548
1549 2000-06-22  Alan Modra  <alan@linuxcare.com.au>
1550
1551         * Makefile.am (DEP): grep for leading `/' in DEP1, and fail if we
1552         find one.
1553         * Makefile.in: Regenerate.
1554
1555 2000-06-20  H.J. Lu  <hjl@gnu.org>
1556
1557         * Makefile.am: Rebuild dependency.
1558         * Makefile.in: Rebuild.
1559
1560 2000-06-18  Stephane Carrez  <stcarrez@worldnet.fr>
1561
1562         * Makefile.in, configure: regenerate
1563         * disassemble.c (disassembler): Recognize ARCH_m68hc12,
1564         ARCH_m68hc11.
1565         * m68hc11-dis.c (read_memory, print_insn, print_insn_m68hc12):
1566         New functions.
1567         * configure.in: Recognize m68hc12 and m68hc11.
1568         * m68hc11-dis.c, m68hc11-opc.c: New files for support of m68hc1x
1569         * Makefile.am (CFILES, ALL_MACHINES): New files for disassembly
1570         and opcode generation for m68hc11 and m68hc12.
1571
1572 2000-06-16  Nick Duffek  <nsd@redhat.com>
1573
1574         * disassemble.c (disassembler): Refer to the PowerPC 620 using
1575         bfd_mach_ppc_620 instead of 620.
1576
1577 2000-06-12  Kazu Hirata  <kazu@hxi.com>
1578
1579         * h8300-dis.c: Fix formatting.
1580         (bfd_h8_disassemble): Distinguish adds/subs, inc/dec.[wl]
1581         correctly.
1582
1583 2000-06-09  Denis Chertykov  <denisc@overta.ru>
1584
1585         * avr-dis.c (avr_operand): Bugfix for jmp/call address.
1586
1587 2000-06-07  Denis Chertykov  <denisc@overta.ru>
1588
1589         * avr-dis.c: completely rewritten.
1590
1591 2000-06-02  Kazu Hirata  <kazu@hxi.com>
1592
1593         * h8300-dis.c: Follow the GNU coding style.
1594         (bfd_h8_disassemble) Fix a typo.
1595
1596 2000-06-01  Kazu Hirata  <kazu@hxi.com>
1597
1598         * h8300-dis.c (bfd_h8_disassemble_init): Fix a typo.
1599         (bfd_h8_disassemble): Distinguish the operand size of inc/dev.[wl]
1600         correctly.  Fix a typo.
1601
1602 2000-05-31  Nick Clifton  <nickc@redhat.com>
1603
1604         * opintl.h (_(String)): Explain why dgettext is used instead of
1605         gettext.
1606
1607 2000-05-30  Nick Clifton  <nickc@redhat.com>
1608
1609         * opintl.h (gettext, dgettext, dcgettext, textdomain,
1610         bindtextdomain): Replace defines with those from intl/libgettext.h
1611         to quieten gcc warnings.
1612
1613 2000-05-26  Alan Modra  <alan@linuxcare.com.au>
1614
1615         * Makefile.am: Update dependencies with "make dep-am"
1616         * Makefile.in: Regenerate.
1617
1618 2000-05-25  Alexandre Oliva  <aoliva@redhat.com>
1619
1620         * m10300-dis.c (disassemble): Don't assume 32-bit longs when
1621         sign-extending operands.
1622
1623 2000-05-15  Donald Lindsay  <dlindsay@redhat.com>
1624
1625         * d10v-opc.c (d10v_opcodes): add ALONE tag to all short branches
1626         except brf's.
1627
1628 2000-05-21  Nick Clifton  <nickc@redhat.com>
1629
1630         * Makefile.am (LIBIBERTY): Define.
1631
1632 2000-05-19 Diego Novillo <dnovillo@redhat.com>
1633
1634         * mips-dis.c (REGISTER_NAMES): Rename to STD_REGISTER_NAMES.
1635         (STD_REGISTER_NAMES): New name for REGISTER_NAMES.
1636         (reg_names): Rename to std_reg_names. Change it to a char **
1637         static variable.
1638         (std_reg_names): New name for reg_names.
1639         (set_mips_isa_type): Set reg_names to point to std_reg_names by
1640         default.
1641
1642 2000-05-16  Frank Ch. Eigler  <fche@redhat.com>
1643
1644         * fr30-desc.h: Partially regenerated to account for changed
1645         CGEN_MAX_* -> CGEN_ACTUAL_MAX_* macros.
1646         * m32r-desc.h: Ditto.
1647
1648 2000-05-15  Nick Clifton  <nickc@redhat.com>
1649
1650         * arm-opc.h: Use upper case for flasg in MSR and MRS
1651         instructions.  Allow any bit to be set in the field_mask of
1652         the MSR instruction.
1653
1654         * arm-dis.c (print_insn_arm): Decode _x and _s bits of the
1655         field_mask of an MSR instruction.
1656
1657 2000-05-11  Thomas de Lellis  <tdel@windriver.com>
1658
1659         * arm-opc.h: Disassembly of thumb ldsb/ldsh
1660         instructions changed to ldrsb/ldrsh.
1661
1662 2000-05-11  Ulf Carlsson  <ulfc@engr.sgi.com>
1663
1664         * mips-dis.c (print_insn_arg): Don't mask top 32 bits of 64-bit
1665         target addresses for 'jal' and 'j'.
1666
1667 2000-05-10  Geoff Keating  <geoffk@redhat.com>
1668
1669         * ppc-opc.c (powerpc_opcodes): Make the predicted-branch opcodes
1670         also available in common mode when powerpc syntax is being used.
1671
1672 2000-05-08  Alan Modra  <alan@linuxcare.com.au>
1673
1674         * m68k-dis.c (dummy_printer): Add ATTRIBUTE_UNUSED to args.
1675         (dummy_print_address): Ditto.
1676
1677 2000-05-04  Timothy Wall  <twall@redhat.com>
1678
1679         * tic54x-opc.c: New.
1680         * tic54x-dis.c: New.
1681         * disassemble.c (disassembler): Add ARCH_tic54x.
1682         * configure.in: Added tic54x target.
1683         * configure: Ditto.
1684         * Makefile.am: Add tic54x dependencies.
1685         * Makefile.in: Ditto.
1686
1687 2000-05-03  J.T. Conklin  <jtc@redback.com>
1688
1689         * ppc-opc.c (VA, VB, VC, VD, VS, SIMM, UIMM, SHB): New macros, for
1690         vector unit operands.
1691         (VX, VX_MASK, VXA, VXA_MASK, VXR, VXR_MASK): New macros, for vector
1692         unit instruction formats.
1693         (PPCVEC): New macro, mask for vector instructions.
1694         (powerpc_operands): Add table entries for above operand types.
1695         (powerpc_opcodes): Add table entries for vector instructions.
1696
1697         * ppc-dis.c (print_insn_big_powerpc): Add PPC_OPCODE_ALTIVEC to mask.
1698         (print_insn_little_powerpc): Likewise.
1699         (print_insn_powerpc): Prepend 'v' when printing vector registers.
1700
1701 2000-04-24  Clinton Popetz  <cpopetz@redhat.com>
1702
1703         * configure.in: Add bfd_powerpc_64_arch.
1704         * disassemble.c (disassembler): Use print_insn_big_powerpc for
1705         64 bit code.
1706
1707 2000-04-24  Nick Clifton  <nickc@redhat.com>
1708
1709         * fr30-desc.c (fr30_cgen_cpu_open): Initialise signed_overflow
1710         field.
1711
1712 2000-04-23  Denis Chertykov  <denisc@overta.ru>
1713
1714         * avr-dis.c (reg_fmul_d): New. Extract destination register from
1715         FMUL instruction.
1716         (reg_fmul_r): New. Extract source register from FMUL instruction.
1717         (reg_muls_d): New. Extract destination register from MULS instruction.
1718         (reg_muls_r): New. Extract source register from MULS instruction.
1719         (reg_movw_d): New. Extract destination register from MOVW instruction.
1720         (reg_movw_r): New. Extract source register from MOVW instruction.
1721         (print_insn_avr): Handle MOVW, MULS, MULSU, FMUL, FMULS, FMULSU,
1722         EICALL, EIJMP, LPM r,Z, ELPM r,Z, SPM, ESPM instructions.
1723
1724 2000-04-22  Timothy Wall  <twall@redhat.com>
1725
1726         * ia64-gen.c (general): Add an ordered table of primary
1727         opcode names, as well as priority fields to disassembly data
1728         structures to enforce a preferred disassembly format based on the
1729         ordering of the opcode tables.
1730         (load_insn_classes): Show a useful message if IC tables are missing.
1731         (load_depfile): Ditto.
1732         * ia64-asmtab.h (struct ia64_dis_names ): Add priority flag to
1733         distinguish preferred disassembly.
1734         * ia64-opc-f.c: Reorder some insn for preferred disassembly
1735         format.  Fix incorrect flag on fma.s/fma.s.s0.
1736         * ia64-opc.c: Scan *all* disassembly matches and use the one with
1737         the highest priority.
1738         * ia64-opc-b.c: Use more abbreviations.
1739         * ia64-asmtab.c: Regenerate.
1740
1741 2000-04-21  Jason Eckhardt  <jle@redhat.com>
1742
1743         * hppa-dis.c (extract_16): New function.
1744         (print_insn_hppa): Fix incorrect handling of 'fe'. Added handling of
1745         new operand types l,y,&,fe,fE,fx.
1746
1747 2000-04-21  Richard Henderson  <rth@redhat.com>
1748             David Mosberger  <davidm@hpl.hp.com>
1749             Timothy Wall <twall@redhat.com>
1750             Bob Manson  <manson@charmed.cygnus.com>
1751             Jim Wilson  <wilson@redhat.com>
1752
1753         * Makefile.am (HFILES): Add ia64-asmtab.h, ia64-opc.h.
1754         (CFILES): Add ia64-dis.c, ia64-opc-a.c, ia64-opc-b.c, ia64-opc-f.c,
1755         ia64-opc-i.c, ia64-opc-m.c, ia64-opc-d.c, ia64-opc.c, ia64-gen.c,
1756         ia64-asmtab.c.
1757         (ALL_MACHINES): Add ia64-dis.lo, ia64-opc.lo.
1758         (ia64-ic.tbl, ia64-raw.tbl, ia64-waw.tbl, ia64-war.tbl, ia64-gen,
1759         ia64-gen.o, ia64-asmtab.c, ia64-dis.lo, ia64-opc.lo): New rules.
1760         * Makefile.in: Rebuild.
1761         * configure Rebuild.
1762         * configure.in (bfd_ia64_arch): New target.
1763         * disassemble.c (ARCH_ia64): Define.
1764         (disassembler): Support ARCH_ia64.
1765         * ia64-asmtab.c, ia64-asmtab.h, ia64-dis.c, ia64-gen.c ia64-ic.tbl,
1766         ia64-opc-a.c, ia64-opc-b.c, ia64-opc-d.c ia64-opc-f.c, ia64-opc-i.c,
1767         ia64-opc-m.c, ia64-opc-x.c, ia64-opc.c, ia64-opc.h, ia64-raw.tbl,
1768         ia64-war.tbl, ia64-waw.tbl: New files.
1769
1770 2000-04-20  Alexandre Oliva  <aoliva@redhat.com>
1771
1772         * m10300-dis.c (HAVE_AM30, HAVE_AM33): Define.
1773         (disassemble): Use them.
1774
1775 2000-04-14  Alan Modra  <alan@linuxcare.com.au>
1776
1777         * sysdep.h: Include "ansidecl.h" not <ansidecl.h>
1778         * Makefile.am: Update dependencies.
1779         * Makefile.in: Regenerate.
1780
1781 2000-04-14  Michael Sokolov  <msokolov@ivan.Harhan.ORG>
1782
1783         * a29k-dis.c, alpha-dis.c, alpha-opc.c, arc-dis.c, arc-opc.c,
1784         avr-dis.c, d10v-dis.c, d10v-opc.c, d30v-dis.c, d30v-opc.c,
1785         disassemble.c, h8300-dis.c, h8500-dis.c, hppa-dis.c, i370-dis.c,
1786         i370-opc.c, i960-dis.c, m10200-dis.c, m10200-opc.c, m10300-dis.c,
1787         m10300-opc.c, m68k-dis.c, m68k-opc.c, m88k-dis.c, mcore-dis.c,
1788         mips-dis.c, mips-opc.c, mips16-opc.c, pj-dis.c, pj-opc.c,
1789         ppc-dis.c, ppc-opc.c, sh-dis.c, sparc-dis.c, sparc-opc.c,
1790         tic80-dis.c, tic80-opc.c, v850-dis.c, v850-opc.c, vax-dis.c,
1791         w65-dis.c, z8k-dis.c, z8kgen.c: Include sysdep.h.  Remove
1792         ansidecl.h as sysdep.h includes it.
1793
1794 2000-04-7  Andrew Cagney  <cagney@b1.redhat.com>
1795
1796         * configure.in (WARN_CFLAGS): Set to -W -Wall by default.  Add
1797         --enable-build-warnings option.
1798         * Makefile.am (AM_CFLAGS, WARN_CFLAGS): Add definitions.
1799         * Makefile.in, configure: Re-generate.
1800
1801 2000-04-05  J"orn Rennecke <amylaar@redhat.com>
1802
1803         * sh-opc.h (sh_table): Use A_DISP_PC / PCRELIMM_8BY2 for ldre & ldrs.
1804         stc GBR,@-<REG_N> is available for arch_sh1_up.
1805         Group parallel processing insn with identical mnemonics together.
1806         Make three-operand psha / pshl come first.
1807
1808 2000-04-05  J"orn Rennecke <amylaar@redhat.co.uk>
1809
1810         * sh-opc.h (sh_nibble_type): Remove DISP_8 and DISP_4.
1811         Split IMM_[48]{,BY[24]} into IMM[01]_[48]{,BY[24]}.  Add REPEAT.
1812         (sh_arg_type): Add A_PC.
1813         (sh_table): Update entries using immediates.  Add repeat.
1814         * sh-dis.c (print_insn_shx): Remove DISP_8 and DISP_4.
1815         Split IMM_[48]{,BY[24]} into IMM[01]_[48]{,BY[24]}.  Add REPEAT.
1816
1817 2000-04-04  Alan Modra  <alan@linuxcare.com.au>
1818
1819         * po/opcodes.pot: Regenerate.
1820
1821         * Makefile.am (MKDEP): Use gcc -MM rather than mkdep.
1822         (DEP): Quote when passing vars to sub-make.  Add warning message
1823         to end.
1824         (DEP1): Rewrite for "gcc -MM".
1825         (CLEANFILES): Add DEP2.
1826         Update dependencies.
1827         * Makefile.in: Regenerate.
1828
1829 2000-04-03  Denis Chertykov  <denisc@overta.ru>
1830
1831         * avr-dis.c: Syntax cleanup.
1832         (add0fff): Print the pc relative address as a signed number.
1833         (add03f8): Likewise.
1834
1835 2000-04-01  Ian Lance Taylor  <ian@zembu.com>
1836
1837         * disassemble.c (disassembler_usage): Don't use a prototype.  Mark
1838         the parameter ATTRIBUTE_UNUSED.
1839         * ppc-opc.c: Add ATTRIBUTE_UNUSED as needed.
1840
1841 2000-04-01  Alexandre Oliva  <aoliva@redhat.com>
1842
1843         * m10300-opc.c: SP-based offsets are always unsigned.
1844
1845 2000-03-29  Thomas de Lellis  <tdel@windriver.com>
1846
1847         * arm-opc.h (thumb_opcodes): Disassemble 0xde.. to "bal"
1848         [branch always] instead of "undefined".
1849
1850 2000-03-27  Nick Clifton  <nickc@redhat.com>
1851
1852         * d30v-opc.c (d30v_format_table): Move SHORT_AR to end of list of
1853         short instructions, from end of list of long instructions.
1854
1855 2000-03-27  Ian Lance Taylor  <ian@zembu.com>
1856
1857         * Makefile.am (CFILES): Add avr-dis.c.
1858         (ALL_MACHINES): Add avr-dis.lo.
1859
1860 2000-03-27  Alan Modra  <alan@linuxcare.com>
1861
1862         * avr-dis.c (add0fff, add03f8): Don't use structure bitfields to
1863         truncate integers.
1864         (print_insn_avr): Call function via pointer in K&R compatible way.
1865         (dispLDD, regPP, reg50, reg104, reg40, reg20w, lit404, lit204,
1866         add0fff, add03f8): Convert to old style function declaration and
1867         add prototype.
1868         (avrdis_opcode): Add prototype.
1869
1870 2000-03-27  Denis Chertykov  <denisc@overta.ru>
1871
1872         * avr-dis.c: New file.  AVR disassembler.
1873         * configure.in (bfd_avr_arch): New architecture support.
1874         * disassemble.c: Likewise.
1875         * configure: Regenerate.
1876
1877 2000-03-06  J"oern Rennecke <amylaar@redhat.com>
1878
1879         * sh-opc.h (sh_table): ldre and ldrs have a *signed* displacement.
1880
1881 2000-03-02  J"orn Rennecke <amylaar@redhat.co.uk>
1882
1883         * d30v-dis.c (print_insn): Remove d*i hacks.  Use per-operand
1884         flag to determine if operand is pc-relative.
1885         * d30v-opc.c:
1886         (d30v_format_table):
1887         (REL6S3): Renamed from IMM6S3.
1888         Added flag OPERAND_PCREL.
1889         (REL12S3, REL18S3, REL32): Split from IMM12S3, IMM18S3, REL32, with
1890         added flag OPERAND_PCREL.
1891         (IMM12S3U): Replaced with REL12S3.
1892         (SHORT_D2, LONG_D): Delay target is pc-relative.
1893         (SHORT_B2r, SHORT_B3r, SHORT_B3br, SHORT_D2r, LONG_Ur, LONG_2r):
1894         Split from SHORT_B2, SHORT_D2, SHORT_B3b, SHORT_D2, LONG_U, LONG_2r,
1895         using the REL* operands.
1896         (LONG_2br, LONG_Dr): Likewise, from LONG_2b, LONG_D.
1897         (SHORT_D1r, SHORT_D2Br, LONG_Dbr): Renamed from SHORT_D1, SHORT_D2B,
1898         LONG_Db, using REL* operands.
1899         (SHORT_U, SHORT_A5S): Removed stray alternatives.
1900         (d30v_opcode_table): Use new *r formats.
1901
1902 2000-02-28  Nick Clifton  <nickc@redhat.com>
1903
1904         * m32r-desc.c (m32r_cgen_cpu_open): Replace 'flags' with
1905         'signed_overflow_ok_p'.
1906
1907 2000-02-27  Eli Zaretskii  <eliz@is.elta.co.il>
1908
1909         * Makefile.am (stamp-lib): Use $(LIBTOOL) --config to get the
1910         name of the libtool directory.
1911         * Makefile.in: Rebuild.
1912
1913 2000-02-24  Nick Clifton  <nickc@redhat.com>
1914
1915         * cgen-opc.c (cgen_set_signed_overflow_ok): New function.
1916         (cgen_clear_signed_overflow_ok): New function.
1917         (cgen_signed_overflow_ok_p): New function.
1918
1919 2000-02-23  Andrew Haley  <aph@redhat.com>
1920
1921         * m32r-asm.c, m32r-desc.c, m32r-desc.h, m32r-dis.c,
1922         m32r-ibld.c, m32r-opc.h: Rebuild.
1923
1924 2000-02-23  Linas Vepstas <linas@linas.org>
1925
1926         * i370-dis.c, i370-opc.c: New.
1927
1928         * disassemble.c (ARCH_i370): Define.
1929         (disassembler): Handle it.
1930
1931         * Makefile.am: Add support for Linux/IBM 370.
1932         * configure.in: Likewise.
1933
1934         * Makefile.in: Regenerate.
1935         * configure: Likewise.
1936
1937 2000-02-22  Chandra Chavva   <cchavva@redhat.com>
1938
1939         * d30v-opc.c (d30v_opcode_tab) : Added FLAG_NOT_WITH_ADDSUBppp to
1940         ST2H, STB, STH, STHH, STW and ST2H opcodes to prohibit parallel
1941         procedure.
1942
1943 2000-02-22  Andrew Haley  <aph@redhat.com>
1944
1945         * mips-dis.c (_print_insn_mips): New arg for OPCODE_IS_MEMBER:
1946         force gp32 to zero.
1947         * mips-opc.c (G6): New define.
1948         (mips_builtin_op): Add "move" definition for -gp32.
1949
1950 2000-02-22  Ian Lance Taylor  <ian@zembu.com>
1951
1952         From Grant Erickson <gerickso@Brocade.COM>:
1953         * ppc-opc.c: Correct dcread--it takes 3 arguments, not 2.
1954
1955 2000-02-21  Alan Modra  <alan@spri.levels.unisa.edu.au>
1956
1957         * dis-buf.c (buffer_read_memory): Change `length' param and all int
1958         vars to unsigned.
1959
1960 2000-02-17 J"orn Rennecke <amylaar@redhat.co.uk>
1961
1962         * sh-dis.c (print_movxy, print_insn_ddt, print_dsp_reg): New functions.
1963         (print_insn_ppi): Likewise.
1964         (print_insn_shx): Use info->mach to select appropriate insn set.
1965         Add support for sh-dsp.  Remove FD_REG_N support.
1966         * sh-opc.h (sh_nibble_type): Add new values for sh-dsp support.
1967         (sh_arg_type): Likewise.  Remove FD_REG_N.
1968         (sh_dsp_reg_nums): New enum.
1969         (arch_sh1, arch_sh2, arch_sh3, arch_sh3e, arch_sh4): New macros.
1970         (arch_sh_dsp, arch_sh3_dsp, arch_sh1_up, arch_sh2_up): Likewise.
1971         (arch_sh3_up, arch_sh3e_up, arch_sh4_up, arch_sh_dsp_up): Likewise.
1972         (arch_sh3_dsp_up): Likewise.
1973         (sh_opcode_info): New field: arch.
1974         (sh_table): Split up insn with FD_REG_N into ones with F_REG_N and
1975         D_REG_N.  Fill in arch field.  Add sh-dsp insns.
1976
1977 2000-02-14  Fernando Nasser  <fnasser@totem.to.redhat.com>
1978
1979         * arm-dis.c: Change flavor name from atpcs-special to
1980         special-atpcs to prevent name conflict in gdb.
1981         (get_arm_regname_num_options, set_arm_regname_option,
1982         get_arm_regnames): New functions.  API to access the several
1983         flavor of register names.  Note: Used by gdb.
1984         (print_insn_thumb): Use the register name entry from the currently
1985         selected flavor for LR and PC.
1986
1987 2000-02-10  Nick Clifton  <nickc@redhat.com>
1988
1989         * mcore-opc.h (enum mcore_opclass): Add MULSH and OPSR
1990         classes.
1991         (mcore_table): Add "idly4", "psrclr", "psrset", "mulsh" and
1992         "mulsh.h" instructions.
1993         * mcore-dis.c (imsk array): Add masks for MULSH and OPSR
1994         classes.
1995         (print_insn_mcore): Add support for little endian targets.
1996         Add support for MULSH and OPSR classes.
1997
1998 2000-02-07  Nick Clifton  <nickc@redhat.com>
1999
2000         * arm-dis.c (parse_arm_diassembler_option): Rename again.
2001         Previous delat did not take.
2002
2003 2000-02-03  Timothy Wall  <twall@redhat.com>
2004
2005         * dis-buf.c (buffer_read_memory):  Use octets_per_byte field
2006         to adjust target address bounds checking and calculate the
2007         appropriate octet offset into data.
2008
2009 2000-01-27  Nick Clifton  <nickc@redhat.com>
2010
2011         * arm-dis.c: (parse_disassembler_option): Rename to
2012         parse_arm_disassembler_option and allow to be exported.
2013
2014         * disassemble.c (disassembler_usage): New function: Print out any
2015         target specific disassembler options.
2016         Call arm_disassembler_options() if the ARM architecture is being
2017         supported.
2018
2019         * arm-dis.c (NUM_ELEM): Define this macro if not already
2020         defined.
2021         (arm_regname): New struct type for ARM register names.
2022         (arm_toggle_regnames): Delete.
2023         (parse_disassembler_option): Use register name structure.
2024         (print_insn): New function: Combines duplicate code found in
2025         print_insn_big_arm and print_insn_little_arm.
2026         (print_insn_big_arm): Call print_insn.
2027         (print_insn_little_arm): Call print_insn.
2028         (print_arm_disassembler_options): Display list of supported,
2029         ARM specific disassembler options.
2030
2031 2000-01-27  Thomas de Lellis  <tdel@windriver.com>
2032
2033         * arm-dis.c (printf_insn_big_arm): Treat ELF symbols with the
2034         ARM_STT_16BIT flag as Thumb code symbols.
2035
2036         * arm-dis.c (printf_insn_little_arm): Ditto.
2037
2038 2000-01-25  Thomas de Lellis  <tdel@windriver.com>
2039
2040         * arm-dis.c (printf_insn_thumb): Prevent double dumping
2041         of raw thumb instructions.
2042
2043 2000-01-20  Nick Clifton  <nickc@redhat.com>
2044
2045         * mcore-opc.h (mcore_table): Add "add" as an alias for "addu".
2046
2047 2000-01-03  Nick Clifton  <nickc@cygnus.com>
2048
2049         * arm-dis.c (streq): New macro.
2050         (strneq): New macro.
2051         (force_thumb): ew local variable.
2052         (parse_disassembler_option): New function: Parse a single, ARM
2053         specific disassembler command line switch.
2054         (parse_disassembler_option): Call parse_disassembler_option to
2055         parse individual command line switches.
2056         (print_insn_big_arm): Check force_thumb.
2057         (print_insn_little_arm): Check force_thumb.
2058
2059 For older changes see ChangeLog-9899
2060 \f
2061 Local Variables:
2062 mode: change-log
2063 left-margin: 8
2064 fill-column: 74
2065 version-control: never
2066 End: