opcodes/ChangeLog

   1 Thu Sep 14 11:58:22 1995  Doug Evans  <dje@canuck.cygnus.com>
   2
   3         * sparc-opc.c (sparc_opcodes): Mark all insns that reference
   4         %psr, %wim, %tbr as F_NOTV9.
   5
   6 Fri Sep  8 01:07:38 1995  Ian Lance Taylor  <ian@cygnus.com>
   7
   8         * Makefile.in (Makefile): Just rebuild Makefile when running
   9         config.status.
  10         (config.h, stamp-h): New targets.
  11         * configure.in: Call AC_CONFIG_HEADER and AC_CANONICAL_SYSTEM
  12         earlier.  Don't bother to call AC_ARG_PROGRAM.  Touch stamp-h when
  13         rebuilding config.h.
  14         * configure: Rebuild.
  15
  16         * mips-opc.c: Change unaligned loads and stores with "t,A"
  17         operands to use "t,A(b)".
  18
  19 start-sanitize-sh3e
  20 Thu Sep  7 19:02:46 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
  21
  22         * sh-dis.c (print_insn_shx): Add F_FR0 support.
  23
  24 end-sanitize-sh3e
  25 Thu Sep  7 19:02:46 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
  26
  27         * sh-dis.c (print_insn_shx): Change loop over op->arg[n] to iterate
  28         until 3 instead of until 2.
  29
  30 Wed Sep  6 21:21:33 1995  Ian Lance Taylor  <ian@cygnus.com>
  31
  32         * Makefile.in (ALL_CFLAGS): Define.
  33         (.c.o, disassemble.o): Use $(ALL_CFLAGS).
  34         (MOSTLYCLEAN): Add config.log.
  35         (distclean): Don't remove config.log.
  36         * configure.in: Substitute HDEFINES.
  37         * configure: Rebuild.
  38
  39 start-sanitize-sh3e
  40 Wed Sep  6 15:08:09 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
  41
  42         * sh-opc.h (sh_arg_type): Add F_FR0.
  43         (sh_table, case fmac): Add F_FR0 as first argument.
  44
  45 end-sanitize-sh3e
  46 Wed Sep  6 15:08:09 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
  47
  48         * sh-opc.h (sh_opcode_info): Increase arg array size to 4.
  49
  50 Tue Sep  5 18:28:10 1995  Doug Evans  <dje@canuck.cygnus.com>
  51
  52         * sparc-dis.c: Remove all references to NO_V9.
  53
  54 Tue Sep  5 20:03:26 1995  Ian Lance Taylor  <ian@cygnus.com>
  55
  56         * aclocal.m4: Just include ../bfd/aclocal.m4.
  57         * configure: Rebuild.
  58
  59 Tue Sep  5 16:09:59 1995  Doug Evans  <dje@canuck.cygnus.com>
  60
  61         * sparc-dis.c (X_DISP19): Define.
  62         (print_insn, case 'G'): Use it.
  63         (print_insn, case 'L'): Sign extend displacement.
  64
  65 Mon Sep  4 14:28:46 1995  Ian Lance Taylor  <ian@cygnus.com>
  66
  67         * configure.in: Run ../bfd/configure.host before AC_PROG_CC.
  68         Subsitute CFLAGS and AR.  Call AC_PROG_INSTALL.  Don't substitute
  69         host_makefile_frag or frags.
  70         * aclocal.m4: New file.
  71         * configure: Rebuild.
  72         * Makefile.in (INSTALL): Set to @INSTALL@.
  73         (INSTALL_PROGRAM): Set to @INSTALL_PROGRAM@.
  74         (INSTALL_DATA): Set to @INSTALL_DATA@.
  75         (AR): Set to @AR@.
  76         (AR_FLAGS): Set to rc rather than qc.
  77         (CC): Define as @CC@.
  78         (CFLAGS): Set to @CFLAGS@.
  79         (@host_makefile_frag@): Remove.
  80         (config.status): Remove dependency upon @frags@.
  81
  82         * configure.in: ../bfd/config.bfd now just sets shell variables.
  83         Use them rather than looking through target Makefile fragments.
  84         * configure: Rebuild.
  85
  86 start-sanitize-sh3e
  87 Thu Aug 31 12:35:32 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
  88
  89         * sh-opc.h (ftrc): Change FPUL_N to FPUL_M.
  90
  91 end-sanitize-sh3e
  92 Wed Aug 30 13:52:28 1995  Doug Evans  <dje@canuck.cygnus.com>
  93
  94         * sparc-opc.c (sparc_opcodes): Delete duplicate wr %y insn.
  95         Add clrx, iprefetch, signx, clruw, cas, casl, casx, casxl synthetic
  96         sparc64 insns.
  97
  98         * sparc-opc.c (sparc_opcodes): Fix prefetcha insn.
  99         (lookup_{name,value}): New functions.
 100         (prefetch_table): New static local.
 101         (sparc_{encode,decode}_prefetch): New functions.
 102         * sparc-dis.c (print_insn): Handle '*' arg (prefetch function).
 103
 104 start-sanitize-sh3e
 105 Wed Aug 30 11:11:58 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
 106
 107         * sh-opc.h: Add blank lines to improve readabililty of sh3e
 108         instructions.
 109
 110 end-sanitize-sh3e
 111 Wed Aug 30 11:09:38 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
 112
 113         * sh-dis.c: Correct comment on first line of file.
 114
 115 Tue Aug 29 15:37:18 1995  Doug Evans  <dje@canuck.cygnus.com>
 116
 117         * disassemble.c (disassembler): Handle bfd_mach_sparc64.
 118
 119         * sparc-opc.c (asi, membar): New static locals.
 120         (sparc_{encode,decode}_{asi,membar}): New functions.
 121         (sparc_opcodes, membar insn): Fix.
 122         * sparc-dis.c (print_insn): Call sparc_decode_asi.
 123         Support decoding of membar masks.
 124         (X_MEMBAR): Define.
 125
 126 Sat Aug 26 21:22:48 1995  Ian Lance Taylor  <ian@cygnus.com>
 127
 128         * m68k-opc.c (m68k_opcode_aliases): Add br, brs, brb, brw, brl.
 129
 130 Mon Aug 21 17:33:36 1995  Ian Lance Taylor  <ian@cygnus.com>
 131
 132         * m68k-opc.c (m68k_opcode_aliases): Add bhib as an alias for bhis,
 133         and likewise for the other branches.  Add bhs as an alias for bcc,
 134         and likewise for the size variants.  Add dbhs as an alias for
 135         dbcc.
 136
 137 start-sanitize-sh3e
 138 Fri Aug 11 13:40:24 1995  Jeff Law  (law@snake.cs.utah.edu)
 139
 140         * sh-opc.h (FP sts instructions): Update to match reality.
 141
 142 end-sanitize-sh3e
 143 Mon Aug  7 16:12:58 1995  Ian Lance Taylor  <ian@cygnus.com>
 144
 145         * m68k-dis.c: (fpcr_names): Add % before all register names.
 146         (reg_names): Likewise.
 147         (print_insn_arg): Don't explicitly print % before register names.
 148         Add % before register names in static array names.  In case 'r',
 149         print data registers as `@(Dn)', not `Dn@'.  When printing a
 150         memory address, don't print @# before it.
 151         (print_indexed): Change base_disp and outer_disp from int to
 152         bfd_vma.  Print using MIT syntax, not mutant invalid Motorola
 153         syntax.  Sign extend 8 byte displacement correctly.
 154         (print_base): Print using MIT syntax.  Print zpc when appropriate.
 155         Change parameter disp from int to bfd_vma.
 156
 157         * m68k-opc.c (m68k_opcode_aliases): Add jsrl and jsrs as aliases
 158         for jsr.
 159
 160 start-sanitize-sh3e
 161 Mon Aug  7 02:21:40 1995  Jeff Law  (law@snake.cs.utah.edu)
 162
 163         * sh-dis.c (print_insn_shx): Handle new operand types F_REG_N,
 164         F_REG_M, FPSCR_M, FPSCR_N, FPUL_M and FPUL_N.
 165         * sh-opc.h (sh_arg_type): Add new operand types.
 166         (sh_table): Add new opcodes from SH3E Floating Point ISA.
 167
 168 end-sanitize-sh3e
 169 Sat Aug  5 16:50:14 1995  Fred Fish  <fnf@cygnus.com>
 170
 171         * Makefile.in (distclean): Remove generated file config.h.
 172
 173 Sat Aug  5 16:50:14 1995  Fred Fish  <fnf@cygnus.com>
 174
 175         * Makefile.in (distclean): Remove generated file config.h.
 176
 177 Wed Aug  2 18:33:40 1995  Ian Lance Taylor  <ian@cygnus.com>
 178
 179         * m68k-opc.c: New file, holding tables from include/opcode/m68k.h.
 180         Clean up tables.
 181         * m68k-dis.c: Remove BREAK_UP_BIG_DECL stuff.
 182         (opcode): Remove.
 183         (print_insn_m68k): Change d to be const.  Use m68k_numopcodes
 184         rather than numopcodes.  Use m68k_opcodes rather than removed
 185         opcode function.  Don't check F_ALIAS.
 186         (print_insn_arg): Change first parameter to be const char *.
 187         * Makefile.in (ALL_MACHINES): Add m68k-opc.o.
 188         (m68k-opc.o): New target.
 189         * configure.in: Build m68k-opc.o for bfd_m68k_arch.
 190         * configure: Rebuild.
 191
 192 Wed Aug  2 08:23:38 1995  Doug Evans  <dje@canuck.cygnus.com>
 193
 194         * sparc-dis.c (HASH_SIZE, HASH_INSN): Define.
 195         (opcode_bits, opcode_hash_table): New variables.
 196         (opcodes_initialized): Renamed from opcodes_sorted.
 197         (build_hash_table): New function.
 198         (is_delayed_branch): Use hash table.
 199         (print_insn): Renamed from print_insn_sparc, made static.
 200         Build and use hash table.  If !sparc64, ignore sparc64 insns,
 201         and vice-versa if sparc64.
 202         (print_insn_sparc, print_insn_sparc64): New functions.
 203         (compare_opcodes): Move sparc64 opcodes to end.
 204         Print commutative insns with constant second.
 205         * sparc-opc.c (all non-v9 insns): Use flag F_NOTV9 instead of F_ALIAS.
 206
 207 Tue Aug  1 00:12:49 1995  Ian Lance Taylor  <ian@cygnus.com>
 208
 209         * sh-dis.c (print_insn_shx): Remove unused local dslot.  Use
 210         print_address_func for A_BDISP12 and A_BDISP8.  Correct test which
 211         avoids printing a delay slot in a delay slot.
 212         * sh-opc.h (sh_table): Fully bracket last entry.
 213
 214 Mon Jul 31 12:04:47 1995  Doug Evans  <dje@canuck.cygnus.com>
 215
 216         * sparc-opc.c (sllx, srax, srlx): Fix disassembly.
 217
 218 Wed Jul 12 00:59:34 1995  Ken Raeburn  <raeburn@kr-pc.cygnus.com>
 219
 220         * configure.in: Get host_makefile_frag from ${srcdir}.
 221
 222         * configure.in: Autoconfiscated.  Check for string[s].h.  Create
 223         config.h from config.in.  Don't set up sysdep.h link.
 224         * sysdep.h: New file.
 225         * configure, config.in: New files, generated from configure.in.
 226         * Makefile.in: Updated to be processed autoconf-style.
 227         (distclean): Keep sysdep.h.  Remove config.log and config.cache.
 228         (Makefile): Depend on config.status.
 229         (config.status): New rule.
 230         * configure.bat: Update Makefile substitutions.
 231
 232 Tue Jul 11 14:23:37 1995  Jeff Spiegel  <jeffs@lsil.com>
 233
 234         * mips-opc.c (L1): Define.
 235         (mips_opcodes): Add R4010 instructions: flushi, flushd, flushid,
 236         addciu, madd, maddu, ffc, ffs, msub, msubu, selsi, selsr, waiti,
 237         and wb.
 238
 239 Tue Jul 11 11:49:49 1995  Ian Lance Taylor  <ian@cygnus.com>
 240
 241         * mips-opc.c (mips_opcodes): For the move pseudo-op, prefer daddu
 242         if ISA 3 and addu otherwise, replacing or, since some MIPS chips
 243         have multiple add units but only a single logical unit.
 244
 245         * ppc-opc.c (powerpc_operands): Change CR to use a bitsize of 3,
 246         shifted by 18, without any insertion or extraction function.
 247         (insert_cr, extract_cr): Remove.
 248
 249 start-sanitize-arc
 250 Mon Jul  3 11:54:31 1995  Ian Lance Taylor  <ian@cygnus.com>
 251
 252         * Makefile.in (ALL_MACHINES): Add arc-dis.o and arc-opc.o.
 253
 254 end-sanitize-arc
 255 Wed Jun 21 20:05:39 1995  Ken Raeburn  <raeburn@cujo.cygnus.com>
 256
 257         * m68k-dis.c (print_insn_arg, print_indexed): Print "%" before
 258         register names.
 259
 260 Thu Jun 15 17:23:31 1995  Stan Shebs  <shebs@andros.cygnus.com>
 261
 262         * mpw-config.in: Add sh and i386 configs, remove sparc config.
 263         * sh-opc.h: Add copyright.
 264
 265 Mon Jun  5 03:30:43 1995  Ken Raeburn  <raeburn@kr-laptop.cygnus.com>
 266
 267         * Makefile.in (crunch-m68k): Delete extra target accidentally
 268         checked in a while ago.
 269
 270 Wed May 24 16:22:13 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
 271
 272         * sh-opc.h (sh_table): Add SH3 support.
 273
 274 Wed May 24 14:16:08 1995  Steve Chamberlain  <sac@slash.cygnus.com>
 275
 276         * sh-opc.h: Added bsrf and braf.
 277
 278 Wed May 10 14:28:16 1995 Richard Earnshaw (rearnsha@armltd.co.uk)
 279
 280         * arm-opc.h (arm_opcodes): Add 64-bit multiply patterns.  Delete
 281         bogus [ls]fm{ea,fd} patterns.
 282
 283         * arm-opc.h (arm_opcodes): Correct typos in stm, ldm, std, and ldc.
 284         * arm-dis.c (print_insn_arm): Make GIVEN a parameter, don't try and
 285         initialize it from memory.  Make function static.
 286         (print_insn_{big,little}_arm): New functions.
 287         * disassemble.c (disassembler, case bfd_arch_arm): Disassemble for
 288         the correct endianness.
 289
 290 start-sanitize-arc
 291 Sat Apr 29 23:20:05 1995  Doug Evans  <dje@chestnut.cygnus.com>
 292
 293         * arc-opc.c (arc_opcodes): Add ARC_OPCODE_CONDITIONAL_BRANCH flag.
 294         (arc_suffixes): Use ARC_DELAY_{NONE,NORMAL,JUMP}.
 295 end-sanitize-arc
 296
 297 Mon Apr 24 14:18:05 1995  Jason Molenda   (crash@phydeaux.cygnus.com>
 298
 299         * sh-opc.h (sh_nibble_type, sh_arg_type): remove trailing , from
 300         enum list.
 301
 302 Wed Apr 19 14:07:03 1995  Michael Meissner  <meissner@tiktok.cygnus.com>
 303
 304         * m68k-dis.c (opcode): Finish change made by Kung Hsu on April
 305         17th, so that it builds again using GCC as the compiler.
 306
 307 Tue Apr 18 12:14:51 1995  Ken Raeburn  <raeburn@cujo.cygnus.com>
 308
 309         * mips-dis.c (print_insn_little_mips): Cast return value from
 310         bfd_getl32 from bfd_vma to unsigned long, because _print_insn_mips
 311         expects an unsigned long, and that might be fewer words of
 312         argument storage (e.g., if bfd_vma is long long on a 32-bit
 313         machine).
 314         (print_insn_big_mips): Likewise with bfd_getb32 value.
 315         (_print_insn_mips): Now static.
 316
 317 Mon Apr 17 12:23:28 1995  Kung Hsu  <kung@rtl.cygnus.com>
 318
 319         * m68k-dis.c: Take out #define BREAK_UP_BIG_DECL kludge, because
 320         gcc memory hog problem with initializer is fixed.
 321
 322 start-sanitize-arc
 323 Wed Apr 12 09:04:12 1995  Doug Evans  <dje@canuck.cygnus.com>
 324
 325         * arc-opc.c (NULL): Define.
 326         (arc_operands, insn fields u,s): Delete.
 327         (arc_operands, insn fields a,b,c): Mark as signed.
 328         (arc_opcodes): No longer const, links computed at run-time.
 329         (arc_opcodes, mac/mul insns): Breakout suffixes as we don't handle
 330         suffixes that affect the insn code.
 331         (arc_opcodes): Resort table to macros are first.
 332         (arc_opcodes, ld [b,c] entry): Add %Q to prevent shimms.
 333         (arc_opcodes, st [b] entry): Likewise.
 334         (arc_opcodes, st [b,d] entry): Fix mask, value.
 335         (arc_reg_names): Add entries for r29, r30, r31, r60.
 336         (opcode_map, icode_map): New static globals.
 337         (arc_opcode_init_tables): Initialize them.
 338         (arc_opcode_lookup_asm, arc_opcode_lookup_dis): New functions.
 339         (insert_shimmoffset): Signal error if register present.
 340         Validate constant.
 341         * arc-dis.c (print_insn): Call arc_opcode_lookup_dis.
 342 end-sanitize-arc
 343
 344 Mon Apr 10 15:55:01 1995  Stan Shebs  <shebs@andros.cygnus.com>
 345
 346         Merge in support for Mac MPW as a host.
 347         (Old change descriptions retained for informational value.)
 348
 349         * mpw-config.in (archname): Compute from the config.
 350         (BFD_MACHINES, ARCHDEFS): Put into mk.tmp.
 351
 352         * mpw-config.in (target_arch): Compute from canonical target.
 353         (m68k, mips, powerpc, sparc): Add architectures.
 354         * mpw-make.in (disassemble.c.o): Add.
 355         (ALL_CFLAGS): Remove special flags (-mc68020 -mc68881 -model far).
 356
 357         * mpw-config.in (BFD_MACHINES): Set to a default value.
 358         * mpw-make.in (BFD_MACHINES): Remove wired-in value.
 359
 360         * mpw-make.in (CSEARCH): Add extra-include to search path.
 361
 362         * mpw-config.in (varargs.h): Don't create.
 363         (sysdep.h): Create using forward-include.
 364         * mpw-make.in (CSEARCH): Add include/mpw to search path.
 365
 366         * mpw-config.in: New file, MPW version of configure.in.
 367         * mpw-make.in: New file, MPW version of Makefile.in.
 368
 369 start-sanitize-arc
 370 Thu Apr  6 20:36:08 1995  Doug Evans  <dje@chestnut.cygnus.com>
 371
 372         * arc-dis.c (print_insn): New parameter `big_p'.  Callers updated.
 373         Call arc_get_opcode_mach to map bfd mach number to opcode value.
 374         (print_insn_*): Pass bfd mach number, not opcode version.
 375         * arc-opc.c (arc_get_opcode_mach): New function.
 376 end-sanitize-arc
 377
 378 Fri Mar 31 14:23:38 1995  Ken Raeburn  <raeburn@cujo.cygnus.com>
 379
 380         * alpha-dis.c (print_insn_alpha): Put empty statement after
 381         default label.
 382
 383 Tue Mar 21 10:51:40 1995  Jeff Law  (law@snake.cs.utah.edu)
 384
 385         * hppa-dis.c (sign_extend): Delete, redundant with libhppa.h version.
 386         (low_sign_extend): Likewise.
 387         (get_field): Delete unused function.
 388         (set_field, deposit_14, deposit_21): Likewise.
 389
 390 Fri Mar 17 15:55:53 1995  J.T. Conklin  <jtc@rtl.cygnus.com>
 391
 392         * i386-dis.c: Support for more pentium opcodes.  From Guy Harris
 393           (guy@netapp.com).
 394
 395 Tue Mar 14 00:52:57 1995  Ken Raeburn  (raeburn@kr-pc.cygnus.com)
 396
 397         Sat Feb 11 17:22:41 1995  Klaus Kaempf  (kkaempf@didymus.rmi.de)
 398
 399         * alpha-opc.h (OSF_ASMCODE): define
 400         print pal-code names as defined in App C of the
 401         Alpha Architecture Reference Manual
 402
 403         * alpha-dis.c: cleaned up output
 404         print stylized code forms as defined in App A.4.3 of the
 405         Alpha Architecture Reference Manual
 406
 407 Wed Mar  8 15:21:14 1995  Ian Lance Taylor  <ian@cygnus.com>
 408
 409         * mips-opc.c: Add new mips4 instructions.  Don't set INSN_RFE for
 410         `rfe'.
 411         * mips-dis.c (print_insn_arg): Handle new argument types 'h', 'R',
 412         'N', and 'M'.
 413
 414 Wed Mar  8 02:54:05 1995  Ken Raeburn  <raeburn@cujo.cygnus.com>
 415
 416         * m68k-dis.c (opcode): New function.  Returns address of opcode
 417         table entry given index, even if the opcode table was split to
 418         work around gcc bugs.
 419         (print_insn_m68k): Call opcode instead of referencing m68k_opcodes
 420         directly.
 421         (BREAK_UP_BIG_DECL): Make secondary array static and const.
 422         (reg_names): Now const.
 423         (print_insn_arg): Arrays cacheFieldName and names now const.
 424         (print_indexed): Array scales now const.
 425
 426 start-sanitize-arc
 427 Tue Mar  7 21:14:14 1995  Doug Evans  <dje@chestnut.cygnus.com>
 428
 429         * arc-dis.c (print_insn_arc_base): Split into big and little fns.
 430         (print_insn_arc_{host,graphics,audio}): Likewise.
 431         (print_insn): Add prototype.
 432         (arc_get_disassembler): New arg `big_p'.  Return little or big
 433         print fn accordingly.
 434         * arc-opc.c (arc_opcode_init_tables): Init arc_operand_map once.
 435         (arc_opcode_supported): Use ARC_OPCODE_CPU to ignore byte order.
 436         (arc_opval_supported): Likewise.
 437         * disassemble.c (disassembler): Pass big endian flag to
 438         arc_get_disassembler.
 439 end-sanitize-arc
 440
 441 Tue Mar  7 16:41:21 1995  Ian Lance Taylor  <ian@cygnus.com>
 442
 443         * ppc-opc.c: Sort recently added instructions by minor opcode
 444         number within major opcode number.
 445
 446 Mon Mar  6 10:04:36 1995  Jeff Law  (law@snake.cs.utah.edu)
 447
 448         * hppa-dis.c: Include libhppa.h.
 449
 450 Fri Feb 24 19:15:36 1995  Ian Lance Taylor  <ian@cygnus.com>
 451
 452         * mips-opc.c: Change dli to use M_DLI, and add dla.
 453
 454 Mon Feb 20 23:54:38 1995  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
 455
 456         * Makefile.in (ALL_MACHINES):  Add w65-dis.o.
 457
 458 start-sanitize-arc
 459 Fri Feb 17 12:42:25 1995  Doug Evans  <dje@chestnut.cygnus.com>
 460
 461         * arc-dis.c (arc_get_disassembler): Change argument to int,
 462         one of bfd_mach_arc_xxx.  All callers updated.
 463 end-sanitize-arc
 464
 465 Thu Feb 16 17:34:41 1995  Ian Lance Taylor  <ian@cygnus.com>
 466
 467         * mips-opc.c: Add r4650 mul instruction.
 468
 469 Wed Feb 15 15:45:20 1995  Ian Lance Taylor  <ian@cygnus.com>
 470
 471         * mips-opc.c: Add uld and usd macros for unaligned double load and
 472         store.
 473
 474 Tue Feb 14 13:17:37 1995  Michael Meissner  <meissner@tiktok.cygnus.com>
 475
 476         * ppc-opc.c (powerpc_opcodes): Add 403GA opcodes rfci, dccci,
 477         mfdcr, mtdcr, icbt, iccci.
 478
 479 start-sanitize-arc
 480 Mon Feb 13 11:09:17 1995  Doug Evans  <dje@canuck.cygnus.com>
 481
 482         * arc-dis.c (print_insn): Handle ARC_OPERAND_ADDRESS.
 483         * arc-opc.c (arc_operands): New operand 'J' for jump addresses.
 484         ('L' operand): Mark as ARC_OPERAND_ADDRESS.
 485         (arc_opcodes, j insn): Use 'J' operand type, not 'L'.
 486         (arc_opcodes, ld/st insns): Fix address writeback operand letter.
 487         (insert_absaddr): New function.
 488
 489 Thu Feb  9 19:19:23 1995  Doug Evans  <dje@canuck.cygnus.com>
 490
 491         * arc-dis.c (print_insn_arc): Rename to print_insn and make static.
 492         New argument `cpu', pass it to arc_opcode_init_tables.
 493         Document byte order dependencies.  Ignore unsupported insns.
 494         (arc_get_disassembler): New function.
 495         (print_insn_arc_base, print_insn_arc_host, print_insn_arc_graphics,
 496         print_insn_arc_audio): New functions.
 497         * arc-opc.c (MULTSHIFT operand): Delete.
 498         (UNSIGNED, SATURATION): New operands.
 499         (mac, mul, mul64, mulu64): New insns.
 500         (ext. asl, asr, lsr, ror): Only available on host and graphics cpus.
 501         (padc, padd, pmov, pand, psbc, psub, swap): New insns.
 502         (host,graphics,audio extended and auxiliary regs): Define.
 503         (ss, sc, mh, ml): New suffixes.
 504         (arc_opcode_supported, arc_opval_supported): New functions.
 505         (insert_multshift, extract_multshift): Deleted.
 506         * disassemble.c (disassembler, case bfd_arch_arc): Call
 507         arc_get_disassembler to get disassembler routine.
 508 end-sanitize-arc
 509
 510 Thu Feb  9 12:28:13 1995  Stan Shebs  <shebs@andros.cygnus.com>
 511
 512         * i960-dis.c (struct tabent, struct sparse_tabent): Change the
 513         signed char fields to shorts, more portable.
 514
 515 Wed Feb  8 17:29:29 1995  Stan Shebs  <shebs@andros.cygnus.com>
 516
 517         * i960-dis.c (struct tabent, struct sparse_tabent): Declare the
 518         char fields as signed chars, since they may have negative values.
 519
 520 Mon Feb  6 10:52:06 1995  J.T. Conklin  <jtc@rtl.cygnus.com>
 521
 522         * i386-dis.c (dis386_twobyte): Add cpuid, From Charles Hannum
 523           (mycroft@netbsd.org).
 524
 525 Mon Jan 30 12:38:00 1995  Ian Lance Taylor  <ian@cygnus.com>
 526
 527         From "Logg, Ed" <elogg@ea.com>:
 528         * ppc-opc.c (extract_bdm): Correct parenthezisation.
 529         * ppc-dis.c (print_insn_powerpc): Print .long before unrecognized
 530         value.
 531
 532 Thu Jan 26 18:32:08 1995  Ian Lance Taylor  <ian@cygnus.com>
 533
 534         * ppc-opc.c: Changes based on patch from David Edelsohn
 535         <edelsohn@mhpcc.edu>.
 536         (powerpc_operands): Add operands SPRBAT and SPRG. Split TBR out of
 537         SPR.
 538         (FXM_MASK): Define.
 539         (insert_tbr): New static function.
 540         (extract_tbr): New static function.
 541         (XFXFXM_MASK, XFXM): Define.
 542         (XSPRBAT_MASK, XSPRG_MASK): Define.
 543         (powerpc_opcodes): Add instructions to access special registers by
 544         name.  Add mtcr and mftbu.
 545
 546 Tue Jan 17 10:56:43 1995  Ian Lance Taylor  <ian@sanguine.cygnus.com>
 547
 548         * mips-opc.c (P3): Define.
 549         (mips_opcodes): Add mad and madu.
 550
 551 Sun Jan 15 16:32:59 1995  Steve Chamberlain  <sac@splat>
 552
 553         * configure.in: Add W65 support.
 554         * disassemble.c: Likewise.
 555         * w65-opc.h, w65-dis.c: New files.
 556
 557 Wed Dec 28 22:15:33 1994  Steve Chamberlain  (sac@jonny.cygnus.com)
 558
 559         * h8300-dis.c (bfd_h8_disassemble): Add support for 2 bit
 560         immediates.
 561
 562 start-sanitize-arc
 563 Tue Dec 20 10:36:55 1994  Doug Evans  <dje@canuck.cygnus.com>
 564
 565         * arc-dis.c (print_insn_arc): Branch offsets are relative to delay
 566         slot.
 567         * arc-opc.c (extract_reladdr): New function.
 568         (insert_reladdr): Store address right-shifted by 2.
 569 end-sanitize-arc
 570
 571 Tue Dec 20 11:25:12 1994  Ian Lance Taylor  <ian@sanguine.cygnus.com>
 572
 573         * mips-opc.c: Add dli as a synonym for li.
 574
 575 start-sanitize-arc
 576 Mon Dec 19 12:35:51 1994  Doug Evans  <dje@canuck.cygnus.com>
 577
 578         * arc-opc.c (insertion fns): Pass pointer to value's table entry.
 579         All uses changed.
 580         (extraction fns): Insn argument now array of two words.  Return pointer
 581         to value's table entry.  All uses changed.
 582         (arc_opcode_lookup_suffix): Exported for arc-dis.c.
 583         (insert_multshift, extract_multshift): New fns.
 584         (arc_operands): Add support for cache bypass suffix.  Add support for
 585         predefined aux regs.  Modifier bits moved to flags field.
 586         (arc_opcodes): Likewise.
 587         Add mul/mulu/shift insns.  Syntax of zero/sign extension insns changed.
 588         New insn rlc.  Update to syntax in programmer's manual.
 589         (arc_reg_names): Fix typo in lp_count.  Add predefined aux regs.
 590         (arc_suffixes): New synonyms lo,hs for cs,cc.  New suffix for cache
 591         bypass.
 592         (arc_opcode_init_tables): New argument to indicate cpu type.
 593         (insert_reg): Handle predefined aux regs.
 594         (extract_reg): Likewise.
 595         (lookup_register): New fn.
 596         * arc-dis.c (arc_condition_codes): Deleted.
 597         (print_insn_arc): Handle insns with 32 bit immediate constants better.
 598         Clean up modifier handling.  Handle predefined aux regs.
 599 end-sanitize-arc
 600
 601 Thu Dec  8 18:23:31 1994  Ken Raeburn  <raeburn@cujo.cygnus.com>
 602
 603         * alpha-dis.c (print_insn_alpha): Handle call_pal instruction, and
 604         print something for reserved opcode values, even if it won't
 605         assemble again.
 606
 607         * mips-dis.c (_print_insn_mips): When initializing, shift right
 608         and mask, to avoid sign extension problems on the Alpha.
 609
 610         * m68k-dis.c (print_insn_arg, case 'J'): Handle buscr and pcr
 611         control registers.
 612
 613 start-sanitize-arc
 614 Tue Nov 29 18:02:43 1994  Doug Evans  <dje@canuck.cygnus.com>
 615
 616         * configure.in: Add ARC support.
 617         * disassemble.c: Likewise.
 618         * arc-dis.c, arc-opc.c: New files.
 619 end-sanitize-arc
 620
 621 Wed Nov 23 22:34:51 1994  Steve Chamberlain  (sac@jonny.cygnus.com)
 622
 623         * sh-opc.h (mov.l gbr): Get direction right.
 624         * sh-dis.c (print_insn_shx): New function.
 625         (print_insn_shl, print_insn_sh): Call print_insn_shx to
 626         print opcodes with right byte order.
 627
 628 Thu Nov  3 19:32:22 1994  Ken Raeburn  <raeburn@cujo.cygnus.com>
 629
 630         * ns32k-dis.c (struct ns32k_option): Renamed from struct option,
 631         to avoid conflicts with getopt.
 632
 633 Mon Oct 31 18:48:10 1994  Ian Lance Taylor  <ian@sanguine.cygnus.com>
 634
 635         * hppa-dis.c (print_insn_hppa): Read the instruction using
 636         bfd_getb32, so that it works on a little endian or 64 bit host.
 637         Remove unused local variable op.
 638
 639 Tue Oct 25 17:07:57 1994  Ian Lance Taylor  <ian@sanguine.cygnus.com>
 640
 641         * mips-opc.c: Use or instead of addu for pseudo-op move, since
 642         addu does not work correctly if -mips3.
 643
 644 Wed Oct 19 13:40:16 1994  Ian Lance Taylor  <ian@sanguine.cygnus.com>
 645
 646         * a29k-dis.c (print_special): Add special register names defined
 647         on 29030, 29040 and 29050.
 648         (print_insn): Handle new operand type 'I'.
 649
 650 Wed Oct 12 11:59:55 1994  Ian Lance Taylor  <ian@sanguine.cygnus.com>
 651
 652         * Makefile.in (INSTALL): Use top level install.sh script.
 653
 654 Wed Oct  5 19:16:29 1994  Ian Lance Taylor  <ian@sanguine.cygnus.com>
 655
 656         * sparc-dis.c: Rewrite to use bitfields, rather than a union, so
 657         that it works on a little endian host.
 658
 659 Tue Oct  4 12:14:21 1994  Ian Lance Taylor  <ian@sanguine.cygnus.com>
 660
 661         * configure.in: Use ${config_shell} when running config.bfd.
 662
 663 Wed Sep 21 18:49:12 1994  Ian Lance Taylor  (ian@sanguine.cygnus.com)
 664
 665         * mips-opc.c (mips_opcodes): "dabs" is only available with -mips3.
 666
 667 Thu Sep 15 16:30:22 1994  Ian Lance Taylor  (ian@sanguine.cygnus.com)
 668
 669         * a29k-dis.c (print_insn): Print the opcode.
 670
 671 Wed Sep 14 17:52:14 1994  Ian Lance Taylor  (ian@sanguine.cygnus.com)
 672
 673         * mips-opc.c (mips_opcodes): Set WR_t for sc and scd.
 674
 675 Sun Sep 11 22:32:17 1994  Jeff Law  (law@snake.cs.utah.edu)
 676
 677         * hppa-dis.c (reg_names): Use r26-r23 for arg0-arg3.
 678
 679 Tue Sep  6 11:37:12 1994  Ian Lance Taylor  (ian@sanguine.cygnus.com)
 680
 681         * mips-opc.c: Set INSN_STORE_MEMORY flag for all instructions
 682         which store a value into memory.
 683
 684 Sun Sep 04 17:58:10 1994  Richard Earnshaw (rwe@pegasus.esprit.ec.org)
 685
 686         * configure.in, Makefile.in, disassemble.c: Add support for the ARM.
 687         * arm-dis.c, arm-opc.h: New files.
 688
 689 Fri Aug  5 14:00:05 1994  Stan Shebs  (shebs@andros.cygnus.com)
 690
 691         * Makefile.in (ns32k-dis.o): Add dependency.
 692         * ns32k-dis.c (print_insn_arg): Declare initialized local as
 693         string, not as array of chars.
 694
 695 Thu Jul 28 18:14:16 1994  Ken Raeburn  (raeburn@cujo.cygnus.com)
 696
 697         * sparc-dis.c (print_insn_sparc): Handle new operand type 'x'.
 698
 699         * sparc-opc.c: Added sparclite extended FP operations, and
 700         versions of v9 impdep* instructions permitting specification of
 701         the OPF field.
 702
 703 Tue Jul 26 16:36:03 1994  Ken Raeburn  (raeburn@cujo.cygnus.com)
 704
 705         * i960-dis.c (reg_names): Now const.
 706         (struct sparse_tabent): New type, copied from array type in mem
 707         function.
 708         (ctrl): Local static array ctrl_tab now const.
 709         (cobr): Local static array cobr_tab now const.
 710         (mem): Local variables reg1, reg2, reg3 now point to const.  Local
 711         static variable mem_tab no longer explicitly initialized.  Changed
 712         mem_init to const array of struct sparse_tabent.
 713         (reg): Local static variable reg_tab no longer explicitly
 714         initialized.  Changed reg_init to const array of struct
 715         sparse_tabent.
 716         (ea): Local static array scale_tab now const.
 717
 718         start-sanitize-i960xl
 719         * i960-dis.c (reg): Added i960XL instructions to reg_init table.
 720         (REG_MAX): Updated.
 721         end-sanitize-i960xl
 722
 723 Tue Jul 19 21:00:00 1994  DJ Delorie (dj@ctron.com)
 724
 725         * configure.bat: the disassember needs to be enabled for
 726         "objdump -d" to work in djgpp.
 727
 728 Wed Jul 13 18:01:58 1994  Ken Raeburn  (raeburn@cujo.cygnus.com)
 729
 730         * ns32k-dis.c: Deleted all code in "#ifdef GDB".
 731         (invalid_float): Enabled general version, doesn't require running
 732         on ns32k host.  Changed to take char* argument, and test for
 733         explicitly specified sizes, instead of using sizeof() on host CPU
 734         types.
 735         (INVALID_FLOAT): Cast first argument.
 736         (opt_u, opt_U, opt_O, opt_C, opt_S, list_P532, list_M532,
 737         list_P032, list_M032): Now const.
 738         (optlist, list_search): Made appropriate arguments now point to
 739         const.
 740         (print_insn_arg): Changed static array of one-character-string
 741         pointers into a static const array of characters; fixed sprintf
 742         statement accordingly.
 743
 744 Sun Jul 10 00:27:47 1994  Ian Dall  (dall@hfrd.dsto.gov.au)
 745
 746         * opcodes/ns32k-dis.c: Semi-new file.  Had apparently been dropped
 747         from distribution. A ns32k-dis.c from a previous distribution has
 748         been brought up to date and supports the new interface.
 749
 750         * disassemble.c: define ARCH_ns32k and add case bfd_arch_ns32k.
 751
 752         * configure.in: add bfd_ns32k_arch target support.
 753
 754         * Makefile.in: add ns32k-dis.o to ALL_MACHINES.
 755         Add ns32k-dis.c to CFILES. Add dependencies for ns32k-dis.o.
 756
 757 Wed Jun 29 22:10:37 1994  Steve Chamberlain  (sac@cygnus.com)
 758
 759         * h8300-dis.c (bfd_h8_disassemble): Get 16bit branch
 760         disassembly right.
 761
 762 Tue Jun 28 13:22:06 1994  Stan Shebs  (shebs@andros.cygnus.com)
 763
 764         * h8300-dis.c, mips-dis.c: Don't use true and false.
 765
 766 Thu Jun 23 12:53:19 1994  David J. Mackenzie  (djm@rtl.cygnus.com)
 767
 768         * configure.in: Change --with-targets to --enable-targets.
 769
 770 Wed Jun 22 13:38:32 1994  Ian Lance Taylor  (ian@sanguine.cygnus.com)
 771
 772         * mips-dis.c (_print_insn_mips): Build a static hash table mapping
 773         opcodes to the first instruction with that opcode, to speed
 774         disassembly of large files.  From ralphc@pyramid.com (Ralph
 775         Campbell).
 776
 777 Tue Jun  7 12:49:44 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
 778
 779         * Makefile.in (mostlyclean): Fix typo (was mostyclean).
 780
 781 Wed May 11 22:32:00 1994  DJ Delorie (dj@ctron.com)
 782
 783         * configure.bat: update to latest makefile.in
 784
 785 Sat May  7 17:13:21 1994  Steve Chamberlain  (sac@cygnus.com)
 786
 787         * a29k-dis.c (print_insn): Print 'x' type operand in hex.
 788         * h8300-dis.c (bfd_h8_disassemble): Print 16bit rels correctly.
 789         * sh-dis.c (print_insn_sh): Don't recur endlessly if delay
 790         slot insn is in a delay slot.
 791         * z8k-opc.h: (resflg): Fix patterns.
 792         * h8500-opc.h Fix CR insn patterns.
 793
 794 Fri May  6 14:34:46 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
 795
 796         * ppc-opc.c (powerpc_opcodes): Put PowerPC versions of "cmp" and
 797         "cmpl" before POWER versions, so that gas -many uses them.
 798
 799 Thu Apr 28 18:32:36 1994  Ken Raeburn  (raeburn@cujo.cygnus.com)
 800
 801         * disassemble.c: New file.
 802         * Makefile.in (OFILES): Add disassemble.o.
 803         (disassemble.o): Provide dependencies; compile with $(ARCHDEFS).
 804         * configure.in: Define ARCHDEFS in Makefile.  Code taken from
 805         binutils/configure.in.
 806
 807         * m68k-dis.c (print_insn_m68k): If F_ALIAS flag is set, skip the
 808         opcode being examined.
 809
 810 Thu Apr 21 17:08:40 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
 811
 812         * ppc-opc.c (powerpc_operands): Added RAL, RAM and RAS.
 813         (insert_ral, insert_ram, insert_ras): New functions.
 814         (powerpc_opcodes): Use RAL for load with update, RAM for lmw, and
 815         RAS for store with update.
 816
 817 Sat Apr 16 23:41:44 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
 818
 819         * ppc-opc.c (powerpc_opcodes): Correct fcir.  From David Edelsohn
 820         (edelsohn@npac.syr.edu).
 821
 822 Wed Apr  6 17:11:45 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
 823
 824         * mips-opc.c (mips_opcodes): Correct operands of "nor" with an
 825         immediate argument.
 826
 827 Mon Apr  4 16:30:46 1994  Doug Evans  (dje@canuck.cygnus.com)
 828
 829         * sparc-opc.c (sparc_opcodes): Fix "rd %fprs,%l0".
 830
 831 Mon Apr  4 13:22:00 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
 832
 833         * ppc-opc.c (powerpc_operands): The signedp field has been
 834         removed, so don't initialize it.  Set the PPC_OPERAND_SIGNED flag
 835         instead.  Add new operand SISIGNOPT.
 836         (powerpc_opcodes): For lis, liu, addis, and cau use SISIGNOPT.
 837         Based on patch from David Edelsohn (edelsohn@npac.syr.edu).
 838         * ppc-dis.c (print_insn_powerpc): Check PPC_OPERAND_SIGNED rather
 839         than signedp field.
 840
 841 Wed Mar 30 00:31:49 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
 842
 843         * i386-dis.c (struct private):  Renamed to dis_private. `private'
 844         is a reserved word for dynix cc.
 845
 846 Mon Mar 28 13:00:15 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
 847
 848         * configure.in: Change error message to refer to bfd/config.bfd
 849         rather than bfd/configure.in.
 850
 851 Mon Mar 28 12:28:30 1994  David Edelsohn  (edelsohn@npac.syr.edu)
 852
 853         * ppc-opc.c: Define POWER2 as short alias flag.
 854         (powerpc_opcodes): Add POWER/2 opcodes lfq*, stfq*, fcir[z], and
 855         fsqrt.
 856
 857 Wed Mar 23 12:23:05 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
 858
 859         * i960-dis.c (print_insn_i960): Don't read a second word for
 860         opcodes 0, 1, 2 and 3.
 861
 862 Wed Mar 16 15:37:58 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
 863
 864         * configure.in: Don't build m68881-ext.o for bfd_m68k_arch.
 865
 866 Mon Mar 14 14:53:50 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
 867
 868         * m68881-ext.c: Removed; no longer used.
 869         * Makefile.in: Changed accordingly.
 870
 871         * m68k-dis.c (ext_format_68881): Don't declare.
 872         (print_insn_m68k): If an instruction uses place 'i', it uses at
 873         least four fixed bytes.
 874         (print_insn_arg): Don't bump p by 2 for case 'I', place 'i'.  For
 875         extended float, convert to double using floatformat_to_double, not
 876         ieee_extended_to_double, and fetch the data before converting it.
 877
 878 Tue Mar  8 18:12:25 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
 879
 880         * mips-opc.c: It's sqrt.s, not sqrt.w.  From
 881         davidj@ICSI.Berkeley.EDU (David Johnson).
 882
 883 Tue Feb  8 16:55:27 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
 884
 885         * ppc-opc.c (powerpc_opcodes): The POWER uses bdn[l][a] where the
 886         PowerPC uses bdnz[l][a].
 887
 888 Tue Feb  8 00:32:28 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
 889
 890         * dis-buf.c, i386-dis.c:  Include sysdep.h.
 891
 892 Mon Feb  7 19:22:23 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
 893
 894         * configure.in (bfd_powerpc_arch): Use ppc-dis.o and ppc-opc.o.
 895
 896         * ppc-opc.c (powerpc_opcodes): Mark POWER instructions supported
 897         by Motorola PowerPC 601 with PPC_OPCODE_601.
 898         * ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc):
 899         Disassemble Motorola PowerPC 601 instructions as well as normal
 900         PowerPC instructions.
 901
 902 Sun Feb  6 07:45:17 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
 903
 904         * i960-dis.c (reg, mem): Just use a static array instead of
 905         calling xmalloc.
 906
 907 Sat Feb  5 00:04:02 1994  Jeffrey A. Law  (law@snake.cs.utah.edu)
 908
 909         * hppa-dis.c (print_insn_hppa): For '?' and '@' only adjust the
 910         condition name index if this is for a negated condition.
 911
 912         * hppa-dis.c (print_insn_hppa): No space before 'H' operand.
 913         Floating point format for 'H' operand is backwards from normal
 914         case (0 == double, 1 == single).  For '4', '6', '7', '9', and '8'
 915         operands (fmpyadd and fmpysub), handle bizarre register
 916         translation correctly for single precision format.
 917
 918         * hppa-dis.c (print_insn_hppa): Do not emit a space after 'F'
 919         or 'I' operands if the next format specifier is 'M' (fcmp
 920         condition completer).
 921
 922 Feb  4 23:38:03 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
 923
 924         * ppc-opc.c (powerpc_operands): New operand type MBE to handle a
 925         single number giving a bitmask for the MB and ME fields of an M
 926         form instruction.  Change NB to accept 32, and turn it into 0;
 927         also turn 0 into 32 when disassembling.  Seperated SH from NB.
 928         (insert_mbe, extract_mbe): New functions.
 929         (insert_nb, extract_nb): New functions.
 930         (SC_MASK): Mask out SA and LK bits.
 931         (powerpc_opcodes): Change "cal" to use RT, D, RA rather than RT,
 932         RA, SI.  Change "liu" and "cau" to use UI rather than SI.  Mark
 933         "bctr" and "bctrl" as accepted by POWER.  Change "rlwimi",
 934         "rlimi", "rlwimi.", "rlimi.", "rlwinm", "rlinm", "rlwinm.",
 935         "rlinm.", "rlmi", "rlmi.", "rlwnm", "rlnm", "rlwnm.", "rlnm." to
 936         use MBE rather than MB.  Add "mfmq" and "mtmq" POWER instructions.
 937         (powerpc_macros): Define table of macro definitions.
 938         (powerpc_num_macros): Define.
 939
 940         * ppc-dis.c (print_insn_powerpc): Don't skip optional operands
 941         if PPC_OPERAND_NEXT is set.
 942
 943 Sat Jan 22 23:10:07 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
 944
 945         * i960-dis.c (print_insn_i960): Make buffer bfd_byte instead of
 946         char.  Retrieve contents using bfd_getl32 instead of shifting.
 947
 948 Fri Jan 21 19:01:39 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
 949
 950         * ppc-opc.c: New file.  Opcode table for PowerPC, including
 951         opcodes for POWER (RS/6000).
 952         * ppc-dis.c: New file.  PowerPC and Power (RS/6000) disassembler.
 953         * Makefile.in (ALL_MACHINES): Add ppc-dis.o and ppc-opc.o.
 954         (CFILES): Add ppc-dis.c.
 955         (ppc-dis.o, ppc-opc.o): New targets.
 956         * configure.in: Build ppc-dis.o and ppc-opc.o for bfd_rs6000_arch.
 957
 958 Mon Jan 17 20:05:49 1994  Jeffrey A. Law  (law@snake.cs.utah.edu)
 959
 960         * hppa-dis.c (print_insn_hppa): Handle 'N' in assembler template.
 961         No space before 'u', 'f', or 'N'.
 962
 963 Sun Jan 16 14:20:16 1994  Jim Kingdon  (kingdon@deneb.cygnus.com)
 964
 965         * i386-dis.c (print_insn_i386): Add FIXME comment regarding reading
 966         farther than we should.
 967
 968         * i386-dis.c (dis386): Use Yb and Yv for scasb and scasS.
 969
 970 Thu Jan  6 12:38:05 1994  David J. Mackenzie  (djm@thepub.cygnus.com)
 971
 972         * sparc-dis.c m68k-dis.c alpha-dis.c a29k-dis.c: Fix comments.
 973
 974 Wed Jan  5 11:56:21 1994  David J. Mackenzie  (djm@thepub.cygnus.com)
 975
 976         * i960-dis.c (print_insn_i960): Only read word2 if the instruction
 977         needs it, to prevent reading past the end of a section.
 978
 979 Wed Nov 17 17:20:12 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
 980
 981         * mips-opc.h: Use macro for j instruction, to support SVR4 PIC.
 982         Removed t,A case for la; always use t,A(b) case.
 983
 984 Mon Nov  8 12:37:36 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
 985
 986         From Ted Lemen <mellon@pepper.ncd.com>
 987         * mips-dis.c (print_insn_arg): Handle 'k'.
 988         * mips-opc.c: Make cache use k, not t.
 989
 990 Sun Nov  7 23:52:34 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
 991
 992         * alpha-opc.h, alpha-dis.c (print_insn_alpha):  Add
 993         FLOAT_MEMORY_FORMAT_CODE, FLOAT_BRANCH_FORMAT_CODE, correct
 994         FLOAT_FORMAT_CODE to put out floating point register names.
 995
 996 Mon Nov  1 18:17:51 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
 997
 998         * mips-opc.c: Use macros for jal variants, to support SVR4 PIC.
 999
1000 Thu Oct 28 17:42:23 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1001
1002         * a29k-dis.c (print_insn): Use 0x%08x, not 0x%8x.
1003
1004 Wed Oct 27 11:48:01 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1005
1006         * mips-opc.c (dsll, dsra, dsrl): Added '>' cases for shift counts
1007         larger than 32.  Moved dsxx32 variants first for disassembler.
1008
1009 Mon Oct 25 11:33:14 1993  Steve Chamberlain  (sac@phydeaux.cygnus.com)
1010
1011         * z8kgen.c, z8k-opc.h: Add full lda information.
1012
1013 Tue Oct 19 12:39:25 1993  Jeffrey A Law  (law@cs.utah.edu)
1014
1015         * hppa-dis.c (print_insn_hppa): Do not emit a space after
1016         movb instructions.  Any necessary space will be emitted by
1017         the code to handle nullification completers.
1018
1019 Wed Oct 13 16:19:07 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1020
1021         * mips-opc.c: Moved l.d down so that it disassembles as ldc1.
1022
1023 Fri Oct  8 02:34:21 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
1024
1025         * alpha-opc.h:  Add ldl_l, fix typo for ldq_u.
1026         * alpha-dis.c (print_insn_alpha):  Add code for PAL_FORMAT_CODE.
1027
1028 Tue Oct  5 17:47:53 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1029
1030         * mips-opc.c: Correct lwu opcode value (book had it wrong).
1031
1032 Thu Sep 30 11:26:18 1993  Steve Chamberlain  (sac@phydeaux.cygnus.com)
1033
1034         * z8k-dis.c (FETCH_DATA): get just the right amount of data.
1035         (unpack_instr): Cope with ARG_IMM4M1 type instructions.
1036
1037 Wed Sep 29 16:24:49 1993  K. Richard Pixley  (rich@sendai.cygnus.com)
1038
1039         * m88k-dis.c (m88kdis): comment change.  Remove space after
1040           printing mnemonic.
1041           (printop): handle new arg types DEC and XREG for m88110.
1042
1043 Tue Sep 28 19:20:16 1993  Jeffrey A Law (law@snake.cs.utah.edu)
1044
1045         * hppa-dis.c (print_insn_hppa): Handle 'z' operand
1046         type for absolute branch addresses.  Delete special
1047         "ble" and "be" code in 'W' operand code.
1048
1049 Fri Sep 24 14:08:33 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1050
1051         * mips-opc.c: Set hazard information correctly for branch
1052         likely instructions.
1053
1054 Fri Sep 17 04:41:17 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
1055
1056         * alpha-dis.c (print_insn_alpha), alpha-opc.h:  Fix bugs, use
1057         info->fprintf_func for printing and info->print_address_func for
1058         address output.
1059
1060 Wed Sep 15 12:12:07 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1061
1062         * mips-opc.c: Set INSN_TRAP for tXX instructions.
1063
1064 Thu Sep  9 10:11:27 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1065
1066         * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson):
1067         Corrected second case of "b" for disassembler.
1068
1069 Tue Sep  7 14:25:15 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1070
1071         * mips-dis.c, m88k-dis.c: Don't include libbfd.h.  Changed calls
1072         to BFD swapping routines to correspond to BFD name changes.
1073
1074 Thu Sep  2 10:35:25 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1075
1076         * mips-opc.c: Change div machine instruction to be z,s,t rather
1077         than s,t.  Change div macro to be d,v,t rather than d,s,t.
1078         Likewise for divu, ddiv, ddivu.  Added z,s,t case for drem, dremu,
1079         rem and remu which generates only the corresponding div
1080         instruction.  This is for compatibility with the MIPS assembler,
1081         which only generates the simple machine instruction when an
1082         explicit destination of $0 is used.
1083         * mips-dis.c (print_insn_arg): Handle 'z' (always register zero).
1084
1085 Thu Aug 26 17:41:44 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1086
1087         * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Set
1088         WR_31 hazard for bal, bgezal, bltzal.
1089
1090 Thu Aug 26 17:20:02 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
1091
1092         * hppa-dis.c (print_insn_hppa): Use print function
1093         from within the disassemble_info, not fprintf_filtered.
1094
1095 Wed Aug 25 13:51:40 1993  Ken Raeburn  (raeburn@cambridge.cygnus.com)
1096
1097         * hppa-dis.c (print_insn_hppa): Handle '|' like '>'.  (From Jeff
1098         Law, law@cs.utah.edu.)
1099
1100 Mon Aug 23 12:44:05 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1101
1102         * mips-opc.c ("absu"): Removed.
1103         ("dabs"): Added.
1104
1105 Fri Aug 20 10:52:52 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1106
1107         * mips-opc.c: Added r6000 and r4000 instructions and macros.
1108         Changed hazard information to distinguish between memory load
1109         delays and coprocessor load delays.
1110
1111 Wed Aug 18 15:39:23 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1112
1113         * mips-opc.c: li.d uses "T,L", not "S,F".  Added li.s.
1114
1115 Tue Aug 17 09:44:42 1993  David J. Mackenzie  (djm@thepub.cygnus.com)
1116
1117         * configure.in: Don't pass cpu to config.bfd.
1118
1119 Tue Aug 17 12:23:52 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1120
1121         * m88k-dis.c (m88kdis): Make class unsigned.
1122
1123 Thu Aug 12 15:08:18 1993  Ian Lance Taylor  (ian@cygnus.com)
1124
1125         * alpha-dis.c (print_insn_alpha): One branch format case was
1126         missing the instruction name.
1127
1128 Wed Aug 11 19:29:39 1993  David J. Mackenzie  (djm@thepub.cygnus.com)
1129
1130         * Makefile.in (ALL_MACHINES): Renamed from DIS_LIBS.
1131         Add the arch-specific auxiliary files.
1132         (OFILES): Remove the arch-specific auxiliary files
1133         and use BFD_MACHINES instead of DIS_LIBS.
1134         * configure.in: Set BFD_MACHINES based on --with-targets option.
1135
1136 Thu Aug 12 12:04:53 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1137
1138         * mips-opc.c: Added lwc1 E,A(b) to go with lwc1 T,A(b).  Similarly
1139         for swc1.
1140
1141 Sun Aug  8 15:09:30 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
1142
1143         * sparc-opc.c: Change CONST to const to deal with gcc
1144         -Dconst=__const -traditional.
1145
1146 Fri Aug  6 10:58:55 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1147
1148         * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Took
1149         coprocessor instructions out of #if 0, and made them use new
1150         argument type "C".
1151
1152 Thu Aug  5 17:11:06 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
1153
1154         * sparc-dis.c: Include ansidecl.h before opcodes/sparc.h.
1155
1156 Fri Jul 30 18:48:15 1993  John Gilmore  (gnu@cygnus.com)
1157
1158         * sparc-opc.c:  Add F_JSR, F_UNBR, or F_CONDBR flags to each branch
1159         instruction, for use by the disassembler.
1160
1161         * sparc-dis.c (SEX):  Add sign extension macro.  Replace many
1162         hand-coded sign extensions that depended on 32-bit host ints.
1163         FIXME, we still depend on big-endian host bitfield ordering.
1164         (sparc_print_insn):  Set the insn_info_valid field, and the
1165         other fields that describe the instruction being printed.
1166
1167 Tue Jul 27 17:04:58 1993  Jim Wilson  (wilson@sphagnum.cygnus.com)
1168
1169         * sparc-opc.c (call): Accept all 6 addressing modes valid for
1170         `jmp' instead of just one of them.
1171
1172 Wed Jul 21 11:43:32 1993  Jim Kingdon  (kingdon@deneb.cygnus.com)
1173
1174         * hppa-dis.c: Move floating registers from reg_names to fp_reg_names.
1175         (fput_fp_reg_r): Renamed from fput_reg_r.
1176         (fput_fp_reg): New function.
1177         (print_insn_hppa): Use fput_fp_reg{,_r} where appropriate.
1178
1179         * hppa-dis.c (print_insn_hppa, cases 'a', 'd'): Print space afterwards.
1180
1181         * hppa-dis.c (print_insn_hppa, case 'd'): Use GET_COND not GET_FIELD.
1182
1183 Mon Jul 19 13:52:21 1993  Jim Kingdon  (kingdon@deneb.cygnus.com)
1184
1185         * hppa-dis.c (print_insn_hppa): Use extract_5r_store for 'r'.
1186
1187         * hppa-dis.c (print_insn_hppa, case '>'): If next character is 'n',
1188         don't output a space.
1189
1190         * hppa-dis.c (float_format_names): 10 is undefined, and 11 is quad.
1191
1192 Sun Jul 18 16:30:02 1993  Jim Kingdon  (kingdon@rtl.cygnus.com)
1193
1194         * mips-opc.c: New file, containing opcode table from
1195         ../include/opcode/mips.h.
1196         * Makefile.in: Add it.
1197
1198 Thu Jul 15 12:37:05 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1199
1200         * m88k-dis.c: New file, moved in from gdb and changed to use the
1201         new dis-asm.h disassembler interface.
1202         * Makefile.in (DIS_LIBS): Added m88k-dis.o.
1203         (m88k-dis.o): New target.
1204
1205 Tue Jul 13 10:04:16 1993  Ian Lance Taylor  (ian@cygnus.com)
1206
1207         * mips-dis.c (print_insn_arg, _print_insn_mips): Made pointer to
1208         argument string const char * to correspond to opcode/mips.h.
1209
1210 Tue Jul  6 15:18:37 1993  Ian Lance Taylor  (ian@cygnus.com)
1211
1212         * mips-dis.c: Updated to account for name changes in new version
1213         of opcode/mips.h.
1214         * Makefile.in: Added header file dependencies.
1215
1216 Sat Jul  3 23:47:56 1993  Doug Evans  (dje@canuck.cygnus.com)
1217
1218         * h8300-dis.c (bfd_h8_disassemble): Correct fetching of instruction.
1219
1220 Thu Jul  1 12:23:38 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
1221
1222         * m68k-dis.c (NEXTWORD, NEXTLONG): Use ((x) ^ 0x8000) - 0x8000 to sign
1223         extend, rather than shifts.
1224
1225 Sun Jun 20 20:56:56 1993  Ken Raeburn  (raeburn@poseidon.cygnus.com)
1226
1227         * Makefile.in: Undo 15 June change.
1228
1229 Fri Jun 18 14:15:15 1993  Per Bothner  (bothner@deneb.cygnus.com)
1230
1231         * m68k-dis.c (print_insn_arg):  Change return value to byte count
1232         or error code.
1233         * m68k-dis.c:  Re-write to detect invalid operands before
1234         printing anything, so we can handle this the same way we
1235         handle invalid opcodes.
1236
1237 Thu Jun 17 15:01:36 1993  Steve Chamberlain  (sac@phydeaux.cygnus.com)
1238
1239         * sh-dis.c, sh-opc.h: Understand some more opcodes.
1240
1241 Wed Jun 16 13:48:05 1993  Ian Lance Taylor  (ian@cygnus.com)
1242
1243         * hppa-dis.c: Include <ansidecl.h> and sysdep.h before other
1244         header files.
1245
1246 Tue Jun 15 21:45:26 1993  Ken Raeburn  (raeburn@cambridge.cygnus.com)
1247
1248         * sparc-dis.c: Don't declare qsort, since sysdep.h might.
1249
1250         * configure.in: Do make sysdep.h link.
1251         * Makefile.in: Search ../include.  Don't search ../bfd.
1252
1253 Tue Jun 15 13:36:10 1993  Stu Grossman  (grossman@cygnus.com)
1254
1255         Changes from Jeff Law, law@cs.utah.edu:
1256         * hppa-dis.c: Fix typo.  'a' and 'd' were reversed.
1257         Do not print a space before the completers specified by
1258         'a' and 'd'.
1259
1260 Fri Jun 11 18:40:21 1993  Ken Raeburn  (raeburn@cygnus.com)
1261
1262         * mips-dis.c: No longer need to bomb out if HOST_64_BIT is
1263         defined, since gdb has been fixed.
1264
1265         Changes from Jeff Law, law@cs.utah.edu:
1266         * hppa-dis.c (print_insn_hppa): Last argument to fput_reg,
1267         fput_reg_r, fput_creg, fput_const, and fputs_filtered should
1268         be a *disassemble_info, not a *FILE.
1269         * hppa-dis.c: Support 'd', '!', and 'a'.
1270         * hppa-dis.c: Support 's' to extract a 2 bit space register.
1271         * hppa-dis.c: Delete cases which are no longer needed.
1272
1273 Fri Jun 11 07:53:48 1993  Jim Kingdon  (kingdon@cygnus.com)
1274
1275         * m68k-dis.c (print_insn_{m68k,arg}): Add MMU codes.
1276
1277 Tue Jun  8 12:25:01 1993  Steve Chamberlain  (sac@phydeaux.cygnus.com)
1278
1279         * h8300-dis.c: New file, removed from bfd/cpu-h8300.c, with
1280         H8/300-H opcodes.
1281
1282 Mon Jun  7 12:58:49 1993  Per Bothner  (bothner@rtl.cygnus.com)
1283
1284         * Makefile.in (CSEARCH): Add -I../bfd for sysdep.h and bfd.h.
1285         * configure.in:  No longer need to configure to get sysdep.h.
1286
1287 Thu Jun  3 15:56:49 1993  Stu Grossman  (grossman@cygnus.com)
1288
1289         * Patches from Jeffrey Law <law@cs.utah.edu>.
1290         * hppa-dis.c: Support 'I', 'J', and 'K' in output
1291         templates for 1.1 FP computational instructions.
1292
1293 Tue May 25 13:05:48 1993  Ken Raeburn  (raeburn@cambridge.cygnus.com)
1294
1295         * h8500-dis.c (print_insn_h8500): Address argument is type
1296         bfd_vma.
1297         * z8k-dis.c (print_insn_z8k, print_insn_z8001, print_insn_z8002):
1298         Ditto.
1299
1300         * h8500-opc.h (addr_class_type): No comma at end of enumerator.
1301         * sh-opc.h (sh_nibble_type, sh_arg_type): Ditto.
1302
1303         * sparc-dis.c (compare_opcodes): Move static declaration to
1304         top-level.
1305
1306 Fri May 21 14:17:37 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
1307
1308         * sparc-dis.c (print_insn_sparc): Implement 'n' argument for unimp
1309         instruction, remove unimp hack from 'l' argument.
1310
1311 Wed May 19 15:35:54 1993  Stu Grossman  (grossman@cygnus.com)
1312
1313         * z8k-dis.c (fetch_data):  Use unsigned char to make ancient gcc's
1314         happy.
1315
1316 Fri May 14 15:22:46 1993  Ian Lance Taylor  (ian@cygnus.com)
1317
1318         * Based on patches from davidj@ICSI.Berkeley.EDU (David Johnson):
1319         * mips-dis.c (print_insn_arg): Handle 'C' for general coprocessor
1320         instructions.
1321
1322 Fri May 14 00:09:14 1993  Ken Raeburn  (raeburn@cambridge.cygnus.com)
1323
1324         * hppa-dis.c: Include dis-asm.h before sysdep.h.  Changed some
1325         arrays of string pointers to 2-d arrays of chars, to save
1326         space.
1327
1328 Thu May  6 20:51:17 1993  Fred Fish  (fnf@cygnus.com)
1329
1330         * a29k-dis.c, alpha-dis.c, i960-dis.c, sparc-dis.c, z8k-dis.c:
1331         Cast second arg to read_memory_func to "bfd_byte *", as necessary.
1332
1333 Tue May  4 20:31:10 1993  Ken Raeburn  (raeburn@cambridge.cygnus.com)
1334
1335         * hppa-dis.c: New file from Utah, adapted to new disassembler
1336         calling interface.
1337         * Makefile.in: Include it.
1338
1339 Mon Apr 26 18:17:42 1993  Steve Chamberlain  (sac@thepub.cygnus.com)
1340
1341         * sh-dis.c, sh-opc.h: New files.
1342
1343 Fri Apr 23 18:51:22 1993  Steve Chamberlain  (sac@thepub.cygnus.com)
1344
1345         * alpha-dis.c, alpha-opc.h: New files.
1346
1347 Tue Apr  6 12:54:08 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
1348
1349         * mips-dis.c: Sign extend 'j' and 'b' arguments, delta is a signed
1350         value.
1351
1352 Mon Apr  5 17:37:37 1993  John Gilmore  (gnu@cygnus.com)
1353
1354         * sparc-dis.c: Make "ta" the default trap instruction, "t" the alias.
1355
1356 Fri Apr  2 07:24:27 1993  Ian Lance Taylor  (ian@cygnus.com)
1357
1358         * a29k-dis.c, sparc-dis.c, sparc-opc.c: Use CONST rather than
1359         const.
1360
1361 Thu Apr  1 11:20:43 1993  Jim Kingdon  (kingdon@cygnus.com)
1362
1363         * sparc-dis.c: Use fprintf_func a few places where I forgot,
1364         and double percent signs a few places.
1365
1366         * a29k-dis.c, i960-dis.c: New, merged from gdb and binutils.
1367
1368         * i386-dis.c, m68k-dis.c, mips-dis.c, sparc-dis.c:
1369         Use info->print_address_func not print_address.
1370
1371         * dis-buf.c (generic_print_address): New function.
1372
1373 Wed Mar 31 10:07:04 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
1374
1375         * Makefile.in: Add sparc-dis.c.
1376         sparc-dis.c: New file, merges binutils and gdb versions as follows:
1377         From GDB:
1378             Add `add' instruction to the set that get checked
1379             for a preceding `sethi' in order to print an absolute address.
1380             * (print_insn):  Disassembly prefers real instructions.
1381             (is_delayed_branch):  Speed up.
1382             * sparc-opcode.h: Add ALIAS bit to aliases.  Fix up opcode tables.
1383             Still missing some float ops, and needs testing.
1384             * sparc-pinsn.c (print_insn): Eliminate 'set' test, subsumed by
1385             F_ALIAS.  Use printf, not fprintf, when not passing a file
1386             pointer...
1387             (compare_opcodes): Check that identical instructions have
1388             identical opcodes, complain otherwise.
1389         From binutils:
1390             * New 'm' arg.
1391             * Include reg_names.
1392         From neither:
1393             Use dis-asm.h/read_memory_func interface.
1394
1395 Wed Mar 31 20:49:06 1993  K. Richard Pixley  (rich@rtl.cygnus.com)
1396
1397         * h8500-dis.c, i386-dis.c, m68k-dis.c, z8k-dis.c (fetch_data):
1398           deliberately return non-zero to setjmp from longjmp.  Otherwise
1399           this code fails to compile.
1400
1401 Wed Mar 31 17:04:31 1993  Stu Grossman  (grossman@cygnus.com)
1402
1403         * m68k-dis.c:  Fix prototype for fetch_arg().
1404
1405 Wed Mar 31 10:07:04 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
1406
1407         * dis-buf.c: New file, for new read_memory_func interface.
1408         Makefile.in (OFILES): Include it.
1409         m68k-dis.c, i386-dis.c, h8500-dis.c, mips-dis.c, z8k-dis.c:
1410         Use new read_memory_func interface.
1411
1412 Mon Mar 29 14:02:17 1993  Steve Chamberlain  (sac@thepub.cygnus.com)
1413
1414         * h8500-dis.c (print_insn_h8500): Get sign of fp offsets right.
1415         * h8500-opc.h: Fix couple of opcodes.
1416
1417 Wed Mar 24 02:03:36 1993  david d `zoo' zuhn  (zoo at poseidon.cygnus.com)
1418
1419         * Makefile.in: add dvi & installcheck targets
1420
1421 Mon Mar 22 18:55:04 1993  John Gilmore  (gnu@cygnus.com)
1422
1423         * Makefile.in:  Update for h8500-dis.c.
1424
1425 Fri Mar 19 14:27:17 1993  Steve Chamberlain  (sac@thepub.cygnus.com)
1426
1427         * h8500-dis.c, h8500-opc.h: New files
1428
1429 Thu Mar 18 14:12:37 1993  Per Bothner  (bothner@rtl.cygnus.com)
1430
1431         * mips-dis.c, z8k-dis.c:  Converted to use interface defined in
1432         ../include/dis-asm.h.
1433         * m68k-dis.c:  New file (merge of ../binutils/m68k-pinsn.c
1434         and ../gdb/m68k-pinsn.c).
1435         * i386-dis.c:  New file (merge of ../binutils/i386-pinsn.c
1436         and ../gdb/i386-pinsn.c).
1437         * m68881-ext.c:  New file.  Moved definition of
1438         ext_format ext_format_68881 from ../gdb/m68k-tdep.c.
1439         * Makefile.in:  Adjust for new files.
1440         * i386-dis.c:  Patches from John Hassey (hassey@dg-rtp.dg.com).
1441         * m68k-dis.c:  Recognize '9' placement code, so (say) pflush
1442         can be dis-assembled.
1443
1444 Wed Feb 17 09:19:47 1993  Ken Raeburn  (raeburn@cambridge.cygnus.com)
1445
1446         * mips-dis.c (print_insn_arg): Now returns void.
1447
1448 Mon Jan 11 16:09:16 1993  Fred Fish  (fnf@cygnus.com)
1449
1450         * mips-dis.c (ansidecl.h):  Include for benefit of sysdep.h
1451         files that use the macros.
1452
1453 Thu Jan  7 13:15:17 1993  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
1454
1455         * mips-dis.c: New file, from gdb/mips-pinsn.c.
1456         * Makefile.in (DIS_LIBS): Added mips-dis.o.
1457         (CFILES): Added mips-dis.c.
1458
1459 Thu Jan  7 07:36:33 1993  Steve Chamberlain  (sac@thepub.cygnus.com)
1460
1461         * z8k-dis.c (print_insn_z8001, print_insn_z8002): new routines
1462         * z8kgen.c, z8k-opc.h: fix sizes of some shifts.
1463
1464 Tue Dec 22 15:42:44 1992  Per Bothner  (bothner@rtl.cygnus.com)
1465
1466         * Makefile.in:  Improve *clean rules.
1467         * configure.in:  Allow a default host.
1468
1469 Tue Nov 17 19:53:54 1992  david d `zoo' zuhn  (zoo at cirdan.cygnus.com)
1470
1471         * Makefile.in: also use -I$(srcdir)/../bfd, since some sysdep
1472         files include other sysdep files
1473
1474 Thu Nov 12 16:10:37 1992  Steve Chamberlain  (sac@thepub.cygnus.com)
1475
1476         * z8k-dis.c z8k-opc.h z8kgen.c: checkpoint
1477
1478 Fri Oct  9 04:56:05 1992  John Gilmore  (gnu@cygnus.com)
1479
1480         * configure.in:  For host support, use ../bfd/configure.host
1481         so it stays in sync with the ../bfd/hosts database.
1482
1483 Thu Oct  1 23:38:54 1992  david d `zoo' zuhn  (zoo at cirdan.cygnus.com)
1484
1485         * configure.in: use cpu-vendor-os triple instead of nested cases
1486
1487 Wed Sep 30 16:09:20 1992  Michael Werner  (mtw@cygnus.com)
1488
1489         * z8k-dis.c (unparse_instr): fix bug where opcode returned was
1490         *always* the wrong one.
1491
1492 Wed Sep 30 07:42:17 1992  Steve Chamberlain  (sac@thepub.cygnus.com)
1493
1494         * z8kgen.c: added copyright info
1495
1496 Tue Sep 29 12:20:21 1992  Steve Chamberlain  (sac@thepub.cygnus.com)
1497
1498         * z8k-dis.c (unparse_instr): prettier tabs
1499         * z8kgen.c -> z8k-opc.h: bug fixes in tables
1500
1501 Fri Sep 25 12:50:32 1992  Stu Grossman  (grossman at cygnus.com)
1502
1503         * configure.in:  Add ncr* configuration.
1504         * z8k-dis.c (struct instr_data_s):  Make instr_asmsrc char to make
1505         picayune ANSI compilers happy.
1506
1507 Sep 20 08:50:55 1992  Fred Fish  (fnf@cygnus.com)
1508
1509         * configure.in (i386):  Make i386 and i486 synonymous for now.
1510         * configure.in (i[34]86-*-sysv4):  Add my_host definition.
1511
1512 Fri Sep 18 17:01:23 1992  Ken Raeburn  (raeburn@cambridge.cygnus.com)
1513
1514         * Makefile.in (install): Fix typo.
1515
1516 Fri Sep 18 02:04:24 1992  John Gilmore  (gnu@cygnus.com)
1517
1518         * Makefile.in (make):  Remove obsolete crud.
1519         (sparc-opc.o):  Avoid Sun Make VPATH bug.
1520
1521 Tue Sep  8 17:29:27 1992  K. Richard Pixley  (rich@sendai.cygnus.com)
1522
1523         * Makefile.in: since there are no SUBDIRS, remove rule and
1524         references of subdir_do.
1525
1526 Tue Sep  8 17:02:58 1992  Ken Raeburn  (raeburn@cambridge.cygnus.com)
1527
1528         * Makefile.in (install): Get the library name right here too.
1529         Don't install bfd.h, since it's unrelated to this library.  No
1530         subdirs to recurse into, either.
1531         (CFILES): The source file has a .c suffix, not .o.
1532
1533         * sparc-opc.c: New file, moved from BFD.
1534         * Makefile.in (OFILES): Build it.
1535
1536 Thu Sep  3 16:59:20 1992  Michael Werner  (mtw@cygnus.com)
1537
1538         * z8k-dis.c: fixed forward refferences of some declarations.
1539
1540 Mon Aug 31 16:09:45 1992  Michael Werner  (mtw@cygnus.com)
1541
1542         * Makefile.in: get the name of the library right
1543
1544 Mon Aug 31 13:47:35 1992  Steve Chamberlain  (sac@thepub.cygnus.com)
1545
1546         * z8k-dis.c: knows how to disassemble z8k stuff
1547         * z8k-opc.h: new file full of z8000 opcodes
1548
1549 \f
1550 Local Variables:
1551 version-control: never
1552 End: