1 2001-11-13 Zack Weinberg <zack@codesourcery.com>
3 * i386-dis.c (grps): Change "sldt", "str", and "smsw" entries
4 to "sldtQ", "strQ", "smswQ" respectively; all with Ev operand
5 category instead of Ew.
7 2001-11-12 Niraj Gupta <ngupta@zumanetworks.com>
9 * m68k-opc.c: Fix definitions of wddata[bwl].
11 2001-11-09 Richard Sandiford <rsandifo@redhat.com>
13 * cgen-asm.c (cgen_parse_keyword): If the keyword is too big to
14 fit in the buffer, try to match the empty keyword.
16 2001-11-09 Nick Clifton <nickc@cambridge.redhat.com>
18 * cgen-ibld.in (extract_1): Fix badly placed #if 0.
19 * fr30-ibld.c: Regenerate.
20 * m32r-ibld.c: Regenerate.
21 * openrisc-ibld.c: Regenerate.
23 2001-11-04 Chris Demetriou <cgd@broadcom.com>
25 * mips-dis.c (print_insn_mips): Remove spaces at end of line.
27 2001-11-02 Nick Clifton <nickc@cambridge.redhat.com>
29 * configure.in (ALL_LINGUAS): Add "fr", "sv" and "tr".
30 * configure: Regernate.
35 2001-11-01 Stephane Carrez <Stephane.Carrez@worldnet.fr>
37 * m68hc11-dis.c (print_insn): Fix disassembly of movb with a
40 2001-10-30 Hans-Peter Nilsson <hp@bitrange.com>
42 * Makefile.am (CFILES): Add mmix-dis.c and mmix-opc.c. Regenerate
44 * Makefile.in: Regenerate.
45 * mmix-dis.c, mmix-opc.c: New files.
47 2001-10-29 Kazu Hirata <kazu@hxi.com>
49 * d30v-dis.c: Fix a comment typo.
51 2001-10-23 Chris Demetriou <cgd@broadcom.com>
53 * mips-opc.c (mips_builtin_opcodes): Mark "bgezall" and
54 "bltzall" as writing GPR 31 (since they do).
56 * mips-dis.c (print_insn_arg): Calculate info->target
58 (print_insn_mips): Fill in instruction info.
59 (print_mips16_insn_arg): Remove unneded variable 'val'.
60 Removed duplicated instruction target calculations,
61 calculate once and print that result. Use same idiom for
62 masking the jump segment bits as is used in print_insn_arg.
64 2001-10-20 Alan Modra <amodra@bigpond.net.au>
66 * ppc-opc.c (CT): Make it an optional operand.
68 2001-10-17 Chris Demetriou <cgd@broadcom.com>
70 * mips-dis.c (mips_isa_type): Make the ISA used to disassemble
71 SB-1 binaries include instructions specific to the SB-1.
72 * mips-opc.c (SB1): New definition.
73 (mips_builtin_opcodes): Add SB-1 extension opcodes "div.ps",
74 "recip.ps", "rsqrt.ps", and "sqrt.ps".
76 2001-10-17 matthew green <mrg@redhat.com>
78 * ppc-opc.c (STRM): New AltiVec operand.
79 (XDSS): New AltiVec instruction form.
80 (mtvscr): Correct operand list.
81 (dst, dstt, dstst, dststt, dss, dssall): AltiVec instructions.
83 2001-10-17 Alan Modra <amodra@bigpond.net.au>
85 * po/POTFILES.in: Regenerate.
87 2001-10-13 matthew green <mrg@redhat.com>
89 * ppc-opc.c (MO): New macro for MO field of mbar instruction.
90 (powerpc_opcodes): Add rfci, wrtee, wrteei, mfdcrx, mfdcr,
91 mtdcrx, mtdcr, msync, dcba and mbar as BookE instructions.
93 2001-10-13 Nick Clifton <nickc@cambridge.redhat.com>
95 * cgen-ibld.in: Include safe-ctype.h in preference to
97 * cgen-asm.in: Include safe-ctype.h in preference to
98 ctype.h. Fix formatting. Use ISSPACE instead of isspace and
99 TOLOWER instead of tolower.
100 (@arch@_cgen_build_insn_regex): Remove duplication of syntax
101 string elements in constructed regular expression.
102 * fr30-asm.c: Regenerate.
103 * fr30-desc.c: Regenerate.
104 * fr30-ibld.c: Regenerate.
105 * m32r-asm.c: Regenerate.
106 * m32r-desc.c: Regenerate.
107 * m32r-ibld.c: Regenerate.
108 * openrisc-asm.c: Regenerate.
109 * openrisc-desc.c: Regenerate.
110 * openrisc-ibld.c: Regenerate.
111 * po/opcodes.pot: Regenerate.
113 2001-10-12 matthew green <mrg@redhat.com>
115 * ppc-opc.c (insert_de, extract_de, insert_des, extract_des): New
116 instruction field instruction/extraction functions for new BookE
117 DE form instructions.
118 (CT): New macro for CT field in an X form instruction.
119 (DE, DES, DEO, DE_MASK): New macros for DE/DES fields in DE form
121 (PPC64): Don't include PPC_OPCODE_PPC.
122 (403): New opcode macro for PPC403 processors.
123 (BOOKE): New opcode macro for BookE processors.
124 (bce, bcel, bcea, bcela, bclre, bclrel: New BookE instructions.
125 (bcctre, bcctrel, be, bel, bea, bela, icbt, icbte, lwzxe): Likewise.
126 (dcbste, lwzuxe, luxe, dcbfe, lbzxe, lwarxe, lbzuxe): Likewise.
127 (stwcxe, stwxe, stxe, stwuxe, stuxe, stbxe, dcbtste, stbuxe): Likewise.
128 (mfapidi, dcbte, lhzxe, lhzuxe, lhaxe, lhauxe, subfe64): Likewise.
129 (subfeo64, adde64, addeo64, sthxe, sthuxe, subfze64): Likewise.
130 (subfzeo64, addze64, addzeo64, dcbie, subfme64, subfmeo64): Likewise.
131 (addme64, addmeo64, stdcxe., mcrxr64, lwbrxe, lfsxe, lfsuxe): Likewise.
132 (lfdxe, lfduxe, stwbrxe, stfsxe, stfsuxe, stfdxe, dcbae): Likewise.
133 (stfduxe, tlbivax, tlbivaxe, lhbrxe, ldxe, lduxe, tlbsx): Likewise.
134 (tlbsxe, sthbrxe, stdxe, stduxe, icbie, stfiwxe, dcbze, lbze): Likewise.
135 (lbzue, ldue, lhze, lhzue, lhae, lhaue, lwze, lwzue): Likewise.
136 (stbe, stbue, sthe, sthue, stwe, stwue, lfse, lfsue, lfde): Likewise.
137 (lfdue, stde, stdue, stfse, stfsue, stfde, stfdue): Likewise.
139 * ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc): Look
140 for a disassembler option of `booke', `booke32' or `booke64' to enable
141 BookE support in the disassembler.
143 2001-10-12 John Healy <jhealy@redhat.com>
145 * cgen-dis.in (print_insn): Use min (cd->base_insn_bitsize, buflen*8)
146 for the length when extracting the base part of the insn.
148 2001-10-09 Bruno Haible <haible@clisp.cons.org>
150 * cgen-asm.in (*_cgen_build_insn_regex): Generate a case sensitive
151 regular expression. Fix some formatting problems.
152 * fr30-asm.c: Regenerate.
153 * openrisc-asm.c: Regenerate.
154 * m32r-asm.c: Regenerate.
156 2001-10-09 Christian Groessler <cpg@aladdin.de>
158 * z8k-dis.c (unparse_instr): Fixed formatting. Change disassembly
159 of indirect register memory accesses to be same format the
162 2001-10-09 Nick Clifton <nickc@cambridge.redhat.com>
164 * sh-opc.h: Fix encoding of least significant nibble of the
165 DSP single data transfer instructions.
167 * sh-dis.c (print_insn_shx): Fix decoding of As opcode in DSP
170 2001-10-08 Nick Clifton <nickc@cambridge.redhat.com>
172 * cgen-asm.in: Fix compile time warning messages in generated
174 * cgen-dis.in: The same.
175 * cgen-ibld.in: The same.
176 * fr30-asm.c: Regenerate.
177 * fr30-desc.c: Regenerate.
178 * fr30-dis.c: Regenerate.
179 * fr30-ibld.c: Regenerate.
180 * fr30-opc.c: Regenerate.
181 * m32r-asm.c: Regenerate.
182 * m32r-desc.c: Regenerate.
183 * m32r-dis.c: Regenerate.
184 * m32r-ibld.c: Regenerate.
185 * m32r-opc.c: Regenerate.
186 * m32r-opinst.c Regenerate.
187 * openrisc-asm.c: Regenerate.
188 * openrisc-desc.c: Regenerate.
189 * openrisc-dis.c: Regenerate.
190 * openrisc-ibld.c: Regenerate.
191 * openrisc-opc.c: Regenerate.
192 * openrisc-opc.h: Regenerate.
193 * Makefile.in: Regenerate.
194 * po/POTFILES.in: Regenerate.
195 * po/opcodes.pot: Regenerate.
197 2001-10-08 Aldy Hernandez <aldyh@redhat.com>
199 * arm-opc.h (arm_opcodes): Add cirrus insns.
201 * arm-dis.c (print_insn_arm): Add 'I' case.
203 2001-10-03 Alan Modra <amodra@bigpond.net.au>
205 * po/POTFILES.in: Regenerate.
206 * configure: Regenerate.
208 2001-10-02 Alan Modra <amodra@bigpond.net.au>
210 * Makefile.am (Makefile): Depend on bfd/configure.in.
212 * Makefile.in: Regenerate.
214 2001-09-30 John Healy <jhealy@redhat.com>
216 * cgen-ibld.in (insert_1): Switched bfd_get_bits and bfd_set_bits
217 calls to cgen_get_insn_value and cgen_put_insn_value calls.
218 (extract_1): Switched bfd_get_bits call to cgen_get_insn_value call.
220 2001-09-30 Hans-Peter Nilsson <hp@bitrange.com>
222 * Makefile.am: Update dependencies with "make dep-am".
223 * Makefile.in: Regenerate.
225 2001-09-26 Alan Modra <amodra@bigpond.net.au>
227 * arc-dis.c: Formatting fixes.
228 (my_sprintf): Define using VPARAMS, VA_OPEN, VA_FIXEDARG, VA_CLOSE.
230 2001-09-21 Bruno Haible <haible@clisp.cons.org>
232 * arc-dis.c: Don't include <ctype.h>.
233 * openrisc-desc.c: Likewise.
234 * openrisc-ibld.c: Likewise.
236 2001-09-20 Nick Clifton <nickc@cambridge.redhat.com>
238 * fr30-opc.c: Fix compile time warning messages.
239 * i370-opc.c: Fix compile time warning messages.
240 * i960-dis.c: Fix compile time warning messages.
241 * m32r-asm.c: Fix compile time warning messages.
242 * m32r-desc.c: Fix compile time warning messages.
243 * m32r-dis.c: Fix compile time warning messages.
244 * m32r-ibld.c: Fix compile time warning messages.
245 * m32r-opc.c: Fix compile time warning messages.
246 * m32r-opinst.c: Fix compile time warning messages.
247 * ns32k-dis.c: Fix compile time warning messages.
248 * openrisc-asm.c: Fix compile time warning messages.
249 * openrisc-desc.c: Fix compile time warning messages.
250 * openrisc-dis.c: Fix compile time warning messages.
251 * openrisc-ibld.c: Fix compile time warning messages.
252 * openrisc-opc.c: Fix compile time warning messages.
253 * pdp11-dis.c: Fix compile time warning messages.
254 * tic54x-dis.c: Fix compile time warning messages.
255 * v850-opc.c: Fix compile time warning messages.
256 * vax-dis.c: Fix compile time warning messages.
257 * w65-opc.h: Fix compile time warning messages.
258 * z8k-opc.h: Fix compile time warning messages.
259 * z8kgen.c: Fix compile time warning messages.
261 2001-09-19 Nick Clifton <nickc@cambridge.redhat.com>
263 * arm-dis.c: Fix compile time warning messages.
264 * cgen-asm.c: Fix compile time warning messages.
265 * cgen-dis.c: Fix compile time warning messages.
266 * cris-dis.c: Fix compile time warning messages.
267 * d10v-dis.c: Fix compile time warning messages.
268 * fr30-asm.c: Fix compile time warning messages.
269 * fr30-desc.c: Fix compile time warning messages.
270 * fr30-dis.c: Fix compile time warning messages.
271 * fr30-ibld.c: Fix compile time warning messages.
273 2001-09-18 Bruno Haible <haible@clisp.cons.org>
275 * cgen-asm.c: Include "safe-ctype.h" instead of <ctype.h>.
276 (cgen_parse_keyword): Use ISALNUM instead of isalnum.
277 * cgen-opc.c: Include "safe-ctype.h" instead of <ctype.h>.
278 (cgen_keyword_lookup_name): Use ISALPHA/TOLOWER instead of
280 (cgen_keyword_add): Use ISALNUM instead of isalnum.
281 (hash_keyword_name): Use TOLOWER instead of tolower.
282 * fr30-asm.c: Include "safe-ctype.h" instead of <ctype.h>.
283 (parse_insn_normal): Use TOLOWER/ISSPACE instead of
285 (fr30_cgen_assemble_insn): Use ISSPACE instead of isspace.
286 * fr30-desc.c: Don't include <ctype.h>.
287 * fr30-ibld.c: Likewise.
288 * ia64-gen.c: Include "safe-ctype.h" instead of <ctype.h>.
289 (load_insn_classes, parse_resource_users, load_depfile): Use
290 ISSPACE instead of isspace.
291 * m32r-asm.c: Include "safe-ctype.h" instead of <ctype.h>.
292 (parse_insn_normal): Use TOLOWER/ISSPACE instead of
294 (m32r_cgen_assemble_insn): Use ISSPACE instead of isspace.
295 * m32r-desc.c: Don't include <ctype.h>.
296 * m32r-ibld.c: Likewise.
297 * openrisc-asm.c: Include "safe-ctype.h" instead of <ctype.h>.
298 (parse_insn_normal): Use TOLOWER/ISSPACE instead of
300 (openrisc_cgen_assemble_insn): Use ISSPACE instead of isspace.
302 2001-09-18 Martin Schwidefsky <schwidefsky@de.ibm.com>
304 * Makefile.am: Add rules and dependencies to create the s/390 opcode
305 table out of s390-opc.txt automatically.
306 * configure.in: Add BFD_CC_FOR_BUILD to allow CC_FOR_BUILD to be used.
307 * s390-mkopc.c (dumpTable): Change output to create a complete file.
308 * s390-opc.c: New improved opcode format macros and remove the
309 pregenerated opcode table.
310 * s390-opc.txt: Adapt to new improved opcode format macros.
312 2001-09-14 David Schleef <ds@schleef.org>
314 * ppc-opc.c (VXA, VXA_MASK): Fix mask bits.
316 2001-09-04 Alan Modra <amodra@bigpond.net.au>
318 * i386-dis.c (grps): Don't print the implicit al/ax/eax register
319 for opcode 0xf6 or 0xf7 forms of mul, imul, div, idiv insns.
321 2001-08-31 Eric Christopher <echristo@redhat.com>
322 Jason Eckhardt <jle@redhat.com>
324 * mips-dis.c: Add support for bfd_mach_mipsisa32 and
325 bfd_mach_mipsisa64. Remove bfd_mach_mips32, bfd_mach_mips32_4k,
328 2001-08-31 Andreas Jaeger <aj@suse.de>
330 * tic54x-opc.c: Add default initializers to avoid warnings.
332 * arc-opc.c: Include "sysdep.h" to get stdio.h as include file.
333 * arc-ext.c: Likewise.
335 2001-08-28 matthew gren <mrg@redhat.com>
337 * ppc-opc.c (icbt): Order correctly.
339 2001-08-27 David Edelsohn <dje@watson.ibm.com>
340 Torbjorn Granlund <tege@swox.com>
342 * ppc-opc.c (DS): Add PPC_OPERAND_DS flag.
344 (insert_ds): Complain if not a multiple of 4.
346 (XSYNC_MASK): Define.
347 (powerpc_opcodes): Add "slbmte", "lwsync", "ptesync", "slbmfev",
348 "slbmfee". Modify "sync" to use XSYNC_MASK and LS.
350 2001-08-26 Andreas Jaeger <aj@suse.de>
352 * h8500-opc.h: Add default initializers to h8500_table to shut up
355 2001-08-25 Andreas Jaeger <aj@suse.de>
357 * tic54x-dis.c: Add unused attributes where needed.
359 * z8k-dis.c (output_instr): Add unused attribute.
361 * h8300-dis.c: Add missing prototypes.
362 (bfd_h8_disassemble): Make static.
364 * cris-dis.c: Add missing prototype.
365 * h8500-dis.c: Likewise.
366 * m68hc11-dis.c: Likewise.
367 * pj-dis.c: Likewise.
368 * tic54x-dis.c: Likewise.
369 * v850-dis.c: Likewise.
370 * vax-dis.c: Likewise.
371 * w65-dis.c: Likewise.
372 * z8k-dis.c: Likewise.
374 * d10v-dis.c: Add missing prototype.
375 (dis_long): Remove unused variable.
376 (dis_2_short): Likewise.
378 * sh-dis.c: Add missing prototypes.
379 * v850-opc.c: Likewise.
380 Add unused attributes where needed.
382 * ns32k-dis.c: Add missing prototypes.
383 (bit_extract_simple): Remove unused variable.
385 2001-08-23 Martin Schwidefsky <schwidefsky@de.ibm.com>
387 * opcodes/s390-opc.c: Add "low or high" and "not low or high"
388 branch instructions for gcc 3.0.
389 * opcodes/s390-opc.txt: Likewise.
391 2001-08-21 Andreas Jaeger <aj@suse.de>
393 * i960-dis.c: Add parameters for prototypes
394 (ctrl): Add unused attributes.
398 * mips-dis.c: Add missing prototypes.
399 * a29k-dis.c: Likewise.
400 * arc-dis.c: Likewise.
401 * ia64-opc.c: Likewise.
403 * s390-dis.c: Add missing prototypes.
404 (init_disasm): Remove unused attribute since the parameter is
407 2001-08-16 Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
409 * mips-opc.c (M1): Define. Reformatted Code.
410 (mips_builtin_opcodes): Added performance counter opcodes mfpc, mfps,
413 2001-08-16 Jonathan Larmour <jlarmour@redhat.com>
415 * mips-opc.c: R3900s can support all branch likely INSN_MACROs where
416 the corresponding non-likely insn is in MIPS I.
418 2001-08-13 Kazu Hirata <kazu@hxi.com>
420 * mcore-dis.c: Fix formatting.
421 * mips-dis.c: Likewise.
422 * pj-dis.c: Likewise.
423 * z8k-dis.c: Likewise.
425 2001-08-12 Richard Henderson <rth@redhat.com>
427 * cgen-ibld.in (extract_normal): Match type of VALUE and MASK
428 to *VALUEP. Regenerate all cgen files.
430 2001-08-10 Richard Sandiford <rsandifo@redhat.com>
432 * mips-dis.c (print_insn_mips): Remove OPCODE_IS_MEMBER's gp32
434 * mips-opc.c (G6): Undefine.
435 (mips_builtin_opcodes): Remove gp32 entry for "move". Add macro
436 as the first "move" alternative.
438 2001-08-10 Andreas Jaeger <aj@suse.de>
440 * configure.in: Add -Wstrict-prototypes and -Wmissing-prototypes
442 * configure: Regenerate.
444 2001-08-10 Alan Modra <amodra@bigpond.net.au>
446 * ppc-opc.c: Revert 2001-08-08.
448 2001-08-09 Alan Modra <amodra@bigpond.net.au>
450 * dis-buf.c (generic_strcat_address): Add missing prototype.
451 #if 0 the functions as it is unused.
453 2001-08-08 Alan Modra <amodra@bigpond.net.au>
455 1999-10-25 Torbjorn Granlund <tege@swox.com>
456 * ppc-opc.c: Include "bfd.h".
457 (powerpc_operands): Add new field for reloc type.
459 2001-07-21 Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
461 * mips-dis.c (print_insn_arg): Don't use software integer registers
462 for coprocessor registers.
463 (get_mips_isa): Removed.
464 (is_newabi): New function, checks if NewABI is used.
465 (_print_insn_mips): Get distinction between old ABI and new ABI right.
467 2001-08-01 Christian Groessler <cpg@aladdin.de>
469 * z8kgen.c: Fixed indentation of opt[] array. Include stdio.h to
470 get stderr definition.
471 (internal, gas): Removed warnings.
472 (gas): Create a correct final entry for created array.
473 * z8k-opc.h: Recreated with new z8kgen.
475 2001-07-28 Kazu Hirata <kazu@hxi.com>
477 * i386-dis.c: Fix formatting.
479 2001-07-28 Matthias Kramm <kramm@quiss.org>
481 * i386-dis.c: Change formatting conventions for architecture
482 i386:intel to better match the format of various intel i386
483 assemblers, like nasm, tasm or masm.
485 2001-07-24 Alan Modra <amodra@bigpond.net.au>
487 * Makefile.am: Update dependencies with "make dep-am".
488 * Makefile.in: Regenerate
490 2001-07-24 Kazu Hirata <kazu@hxi.com>
492 * alpha-dis.c: Fix formatting.
493 * cris-dis.c: Likewise.
494 * d10v-dis.c: Likewise.
495 * d30v-dis.c: Likewise.
496 * m10300-dis.c: Likewise.
497 * tic54x-dis.c: Likewise.
499 2001-07-23 Kazu Hirata <kazu@hxi.com>
501 * m68k-dis.c: Fix formatting.
502 * pj-dis.c: Likewise.
503 * s390-dis.c: Likewise.
504 * z8k-dis.c: Likewise.
506 2001-07-21 Chris Demetriou <cgd@broadcom.com>
508 * mips-opc.c (mips_builtin_opcodes): Sort c.le.s and c.lt.s
509 into the rest of the surrounding definitions.
511 2001-07-18 Alan Modra <amodra@bigpond.net.au>
513 * i386-dis.c (grps): Print l or w suffix, and require mem modrm
514 for lgdt, lidt, sgdt, sidt.
516 2001-07-13 Philip Blundell <philb@gnu.org>
518 * arm-dis.c (print_insn_arm): Use decimal for offsets in LDR/STR.
520 2001-07-12 Jeff Johnston <jjohnstn@redhat.com>
522 * cgen-asm.in: Include "xregex.h" always to enable the libiberty
524 (@arch@_cgen_build_insn_regex): New routine from Graydon.
525 (@arch@_cgen_assemble_insn): Add Graydon's code to use regex
526 to verify if it is worth parsing the insn as insn "x". Also update
527 error message when insn is not a recognized format of the insn vs
528 when the insn is completely unrecognized.
530 2001-07-11 Frank Ch. Eigler <fche@redhat.com>
532 * cgen-dis.in (print_insn): Use cgen_get_insn_value instead of
534 * cgen-opc.c (cgen_get_insn_value, cgen_put_insn_value): Respect
535 non-zero CGEN_CPU_DESC->insn_chunk_bitsize.
537 2001-07-09 Andreas Jaeger <aj@suse.de>, Karsten Keil <kkeil@suse.de>
539 * i386-dis.c (set_op): Handle 64 bit and 32 bit mode.
540 (OP_J): Use bfd_vma for mask to work properly with 64 bits.
541 (op_address,op_riprel): Use bfd_vma to handle 64 bits.
543 2001-07-05 Ben Elliston <bje@redhat.com>
545 * Makefile.am (CPUDIR): Define.
546 (stamp-m32r): Update dependencies.
548 (stamp-openrisc): Ditto.
549 * Makefile.in: Regenerate.
551 2001-07-03 Zoltan Hidvegi <hzoli@hzoli.2y.net>
553 * ppc-opc.c: Fix encoding of 'clf' instruction.
555 2001-06-30 Geoffrey Keating <geoffk@redhat.com>
557 * cgen-ibld.in (insert_normal): Support CGEN_IFLD_SIGN_OPT.
559 2001-06-28 Geoffrey Keating <geoffk@redhat.com>
561 * cgen-asm.c (cgen_parse_keyword): Allow any first character.
562 * cgen-opc.c (cgen_keyword_add): Ignore special first
563 character when building nonalpha_chars field.
565 2001-06-24 Ben Elliston <bje@redhat.com>
567 * m88k-dis.c: Format to conform to GNU coding standards.
569 2001-06-23 Andreas Jaeger <aj@suse.de>
571 * disassemble.c (disassembler_usage): Add unused attribute.
573 2001-06-22 Eric Christopher <echristo@redhat.com>
575 * mips-opc.c: Move prefx to start of the table.
577 2001-06-22 Stacey Sheldon <ssheldon@Catena.com>
579 * arc-opc.c (insert_st_syntax): Fix over-optimisation of ST
582 2001-06-22 Pauli <pauli@moreton.com.au>
584 * m68k-opc.c: Add wdebug instruction.
586 2001-06-15 Aldy Hernandez <aldyh@redhat.com>
588 * m10300-opc.c (mn10300_opcodes): Change opcode for AM33 subc.
590 2001-06-14 Geoffrey Keating <geoffk@redhat.com>
592 * cgen-asm.c (cgen_parse_keyword): When looking for the
593 boundaries of a keyword, allow any special characters
594 that are actually in one of the allowed keyword.
595 * cgen-opc.c (cgen_keyword_add): Add any special characters
596 to the nonalpha_chars field.
598 2001-06-12 Martin Schwidefsky <schwidefsky@de.ibm.com>
600 * s390-opc.c: Add lgh instruction.
601 * s390-opc.txt: Likewise.
603 2001-06-11 Alan Modra <amodra@bigpond.net.au>
605 * i386-dis.c: Group function prototypes in one place.
606 (FLOATCODE): Redefine as 1.
607 (USE_GROUPS): Redefine as 2.
608 (USE_PREFIX_USER_TABLE): Redefine as 3.
609 (X86_64_SPECIAL): Define as 4.
610 (GRP1b..GRPAMD): Move USE_GROUPS to bytecode1, index to bytecode2.
611 (PREGRP0..PREGRP26): Similarly with USE_PREFIX_USER_TABLE.
612 (dis386_att, dis386_intel, disx86_64_att, disx86_64_intel): Delete.
613 (dis386): New table combining above four tables.
614 (dis386_twobyte_att, dis386_twobyte_intel): Delete.
615 (dis386_twobyte): New table combining above two tables.
616 (x86_64_table): New table to handle x86_64.
618 (float_mem_att, float_mem_intel): Delet.
619 (float_mem): New table combining above two tables.
620 (print_insn_i386): Modify for above.
622 (putop): Handle '{', '|' and '}' to select alternative mnemonics.
623 Return 0 on success, 1 if no valid alternative.
624 (putop <case 'F'>, <case 'H'>): Print nothing for intel_syntax.
625 (putop <case 'T'>): Move to case 'U', and share case 'Q' code.
626 (putop <case 'I'>): Move to case 'T', and share case 'P' code.
627 (OP_REG <case rAX_reg .. rDI_reg>): Handle as for eAX_reg .. eDI_reg
629 (OP_I <case q_mode>): Handle as for v_mode if not 64-bit mode.
630 (OP_I64): If not 64-bit mode, call OP_I.
631 OP_OFF64): If not 64-bit mode, call OP_OFF.
632 (OP_ST, OP_STi, OP_SEG, OP_DIR, OP_OFF, OP_OFF64, OP_MMX): Rename
633 'ignore'/'ignored' to 'bytemode'.
635 2001-06-10 Alan Modra <amodra@bigpond.net.au>
637 * configure.in: Sort 'ta' case statement.
638 * configure: Regenerate.
640 * i386-dis.c (dis386_att): Add 'H' to conditional branch and
642 (disx86_64_att): Likewise.
643 (dis386_twobyte_att): Likewise.
644 (print_insn_i386): Don't print branch hints as a prefix.
645 (putop): 'H' macro prints branch hints.
646 (get64): Kill compile warnings.
648 2001-06-09 Alexandre Oliva <aoliva@redhat.com>
650 * sh-opc.h (sh_table): Don't use empty initializers.
652 2001-06-06 Christian Groessler <cpg@aladdin.de>
654 * z8k-dis.c: Fix formatting.
655 (unpack_instr): Remove unused cases in switch statement. Add
656 safety abort() in default case.
657 (unparse_instr): Add safety abort() in default case.
659 2001-06-06 Peter Jakubek <pjak@snafu.de>
661 * m68k-dis.c (print_insn_m68k): Fix typo.
662 * m68k-opc.c (m68k_opcodes): Correct allowed operands for
663 mcf (ColdFire) div, rem and moveb instructions.
665 2001-06-06 Alan Modra <amodra@bigpond.net.au>
667 * i386-dis.c (cond_jump_flag, loop_jcxz_flag): Define.
668 (cond_jump_mode, loop_jcxz_mode): Define.
669 (dis386_att): Add cond_jump_flag and loop_jcxz_flag as
670 appropriate, and 'F' suffix to loop insns.
671 (disx86_64_att): Likewise.
672 (dis386_twobyte_att): Likewise.
673 (print_insn_i386): Don't output addr prefix for loop, jcxz insns.
674 Output data size prefix for long conditional jumps. Output cs and
676 (putop): Handle 'F', and mark PREFIX_ADDR used for case 'E'.
677 (OP_J): Don't make PREFIX_DATA used.
679 2001-06-04 Alexandre Oliva <aoliva@redhat.com>
681 * sh-opc.h (sh_table): Complete last element entry to avoid
684 2001-05-16 Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
686 * mips-dis.c (mips_isa_type): Add MIPS r12k support.
688 2001-05-23 Alan Modra <amodra@one.net.au>
690 * arc-opc.c: Whitespace changes.
692 2001-05-18 Hans-Peter Nilsson <hp@axis.com>
694 * cris-opc.c (cris_spec_regs): Add missing initializer field for
697 2001-05-15 Frank Ch. Eigler <fche@redhat.com>
699 * cgen-dis.in (extract_normal): Complete support for min<base case.
701 2001-05-15 Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
703 * mips-dis.c (INSNLEN): Rename MAXLEN.
704 (std_reg_names): Replace by mips32_reg_names and mips64_reg_names.
705 (print_insn_arg): Remove $ prefix of register names.
706 (set_mips_isa_type): Remove.
707 (mips_isa_type): New function.
708 (get_mips_isa): New Function.
709 (print_insn_mips): Rename _print_insn_mips.
710 (_print_insn_mips): New function, contains code which was
711 duplicated in print_insn_big_mips and print_insn_little_mips.
712 (print_insn_big_mips): Moved code to _print_insn_mips.
713 (print_insn_little_mips): Likewise.
714 (print_mips16_insn_arg): Remove $ prefix of register names.
715 Print error message before abort.
717 2001-05-14 J.T. Conklin <jtc@redback.com>
719 * ppc-opc.c (powerpc_opcodes): Fixed extended opcode field of
720 simplified mnemonics used for setting PPC750-specific special
723 2001-05-12 H.J. Lu <hjl@gnu.org>
725 * i386-dis.c (print_insn_i386): Always set `mod', `reg' and
728 2001-05-12 Peter Targett <peter.targett@arccores.com>
730 * arc-opc.c (arc_reg_names): Correct attribute for lp_count
731 register to r/w. Formatting fixes throughout file.
733 2001-05-12 Alan Modra <amodra@one.net.au>
735 * i386-dis.c (prefix_user_table): Correct movq2dq, movdq2q, and
737 (twobyte_has_modrm): Update table.
738 (need_modrm): Give it file scope.
739 (MODRM_CHECK): Define.
740 (dofloat): Use MODRM_CHECK.
745 2001-05-07 Frank Ch. Eigler <fche@redhat.com>
747 * cgen-dis.in (default_print_insn): Tolerate min<base instructions
748 even at end of a section.
749 * cgen-ibld.in (extract_normal): Tolerate min!=base!=max instructions
750 by ignoring precariously-unpacked insn_value in favor of raw buffer.
752 2001-05-03 Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
754 * disassemble.c (disassembler_usage): Remove unused attribute.
756 2001-05-04 Frank Ch. Eigler <fche@redhat.com>
758 * m32r-dis.c, -asm.c, -ibld.c: Regenerated with disassembler fixes.
760 2001-05-04 Frank Ch. Eigler <fche@redhat.com>
762 * cgen-dis.in (print_insn): Remove call to read_insn. Instead,
763 assume incoming buffer already has the base insn loaded. Handle
764 smaller-than-base instructions for variable-length case.
766 2001-05-04 Alan Modra <amodra@one.net.au>
768 * i386-dis.c (Ev, Ed): Remove duplicate define.
771 (OP_XS): New function.
772 (dis386_twobyte_att): Correct pinsrw, pextrw, pmovmskb, and
774 (dis386_twobyte_intel): Likewise.
775 (prefix_user_table): Use MS for maskmovq operand.
777 2001-04-27 Johan Rydberg <jrydberg@opencores.org>
779 * Makefile.am: Add OpenRISC target.
780 * Makefile.in: Regenerated.
782 * disassemble.c (disassembler): Recognize the OpenRISC disassembly.
784 * configure.in (bfd_openrisc_arch): Add target.
785 * configure: Regenerated.
787 * openrisc-asm.c: New file.
788 * openrisc-desc.c: Likewise.
789 * openrisc-desc.h: Likewise.
790 * openrisc-dis.c: Likewise.
791 * openrisc-ibld.c: Likewise.
792 * openrisc-opc.c: Likewise.
793 * openrisc-opc.h: Likewise.
795 2001-04-24 Christian Groessler <cpg@aladdin.de>
797 * z8k-dis.c: add names of control registers (ctrl_names);
798 (seg_length): provides instruction length fixup for segmented
799 mode; (unpack_instr): correctly handle ARG_DISP16, ARG_DISP12,
800 CLASS_0DISP7, CLASS_1DISP7, CLASS_DISP8 and CLASS_PR cases;
801 (unparse_intr): handle CLASS_PR, print addresses without '#'
802 * z8k-opc.h: re-created with new z8kgen
803 * z8kgen.c: merged in fixes which were in existing z8k-opc.h; new
804 entries for ldctl/ldctlb instruction
806 2001-04-06 Andreas Jaeger <aj@suse.de>
808 * i386-dis.c: Add ffreep instruction.
810 2001-03-30 Alexandre Oliva <aoliva@redhat.com>
812 * ppc-opc.c (insert_mbe): Shift mask initializer as long.
814 2001-03-24 Alan Modra <alan@linuxcare.com.au>
816 * i386-dis.c (PREGRP25): Define.
817 (dis386_twobyte_att): Use here in place of "movntq" entry.
818 (dis386_twobyte_intel): Likewise.
819 (prefix_user_table): Add PREGRP25 entry for "movntq" and "movntdq".
821 (dis386_twobyte_att): Use here.
822 (dis386_twobyte_intel): Likewise.
823 (prefix_user_table): Add PREGRP26 entry for "punpcklqdq".
824 (prefix_user_table <maskmovdqu>): XM operand, not MX.
825 (prefix_user_table): Cosmetic changes to "bad" entries.
827 2001-03-23 Nick Clifton <nickc@redhat.com>
829 * mips-opc.c: Remove extraneous whitespace.
830 * mips-dis.c: Remove extraneous whitespace.
832 2001-03-22 Ben Elliston <bje@redhat.com>
834 * cgen-asm.in (@arch@_cgen_assemble_insn): Move tmp_errmsg
835 declaration inside CGEN_VERBOSE_ASSEMBLER_ERRORS conditional.
836 * cgen-ibld.in (put_insn_int_value): Mark cd parameter as unused
837 to allay a compiler warning.
839 2001-03-22 Alan Modra <alan@linuxcare.com.au>
841 * i386-dis.c (dis386_twobyte_att): Add entries for paddq, psubq.
842 (dis386_twobyte_intel): Likewise.
843 (twobyte_has_modrm): Set entry for paddq, psubq.
845 2001-03-20 Patrick Macdonald <patrickm@redhat.com>
847 * cgen-dis.in (print_insn_@arch@): Add support for target machine
848 determination via CGEN_COMPUTE_MACH.
849 * fr30-desc.c: Regenerate.
850 * fr30-dis.c: Regenerate.
851 * fr30-opc.h: Regenerate.
852 * m32r-desc.c: Regenerate.
853 * m32r-dis.c: Regenerate.
854 * m32r-opc.h: Regenerate.
855 * m32r-opinst.c: Regenerate.
857 2001-03-20 H.J. Lu <hjl@gnu.org>
859 * configure.in: Remove the redundent AC_ARG_PROGRAM.
860 * configure: Rebuild.
862 2001-03-19 Jim Wilson <wilson@redhat.com>
864 * ia64-gen.c (fetch_insn_class): If xsect, then ignore comment and
865 notestr if larger than xsect.
866 (in_class): Handle format M5.
867 * ia64-asmtab.c: Regnerate.
869 2001-03-19 John David Anglin <dave@hiauly1.hia.nrc.ca>
871 * vax-dis.c (print_insn_vax): Only fetch two bytes if the info buffer
872 has more than one byte left to read.
874 2001-03-16 Martin Schwidefsky <schwidefsky@de.ibm.com>
876 * s390-opc.c: Add new opcodes. Smooth out formatting.
877 * s390-opc.txt: Add new opcodes.
879 2001-03-06 Nick Clifton <nickc@redhat.com>
881 * arm-dis.c (print_insn_thumb): Compute destination address
882 of BLX(1) instruction by taking bit 1 from PC and not from bit
885 2001-03-06 Igor Shevlyakov <igor@windriver.com>
887 * m68k-dis.c (print_insn_m68k): Recognize Coldfire CPUs
888 so command line switches will work.
890 2001-03-05 Dave Brolley <brolley@redhat.com>
892 * fr30-asm.c: Regenerate.
893 * fr30-desc.c: Regenerate.
894 * fr30-desc.h: Regenerate.
895 * fr30-dis.c: Regenerate.
896 * fr30-ibld.c: Regenerate.
897 * fr30-opc.c: Regenerate.
898 * fr30-opc.h: Regenerate.
899 * m32r-asm.c: Regenerate.
900 * m32r-desc.c: Regenerate.
901 * m32r-desc.h: Regenerate.
902 * m32r-dis.c: Regenerate.
903 * m32r-ibld.c: Regenerate.
904 * m32r-opc.c: Regenerate.
905 * m32r-opc.h: Regenerate.
906 * m32r-opinst.c: Regenerate.
908 2001-02-28 Igor Shevlyakov <igor@windriver.com>
910 * m68k-opc.c: fix cpushl according to Motorola. Enable
911 bunch of instructions for Coldfire 5407 and add all new.
913 2001-02-27 Alan Modra <alan@linuxcare.com.au>
915 * configure.in (BFD_VERSION): Do without grep.
916 * configure: Regenerate.
917 * Makefile.am: Run "make dep-am".
918 * Makefile.in: Regenerate.
920 2001-02-23 David Mosberger <davidm@hpl.hp.com>
922 * ia64-opc-a.c: Add missing pseudo-ops for "cmp" and "cmp4".
923 * ia64-asmtab.c: Regenerate.
925 2001-02-21 David Mosberger <davidm@hpl.hp.com>
927 * ia64-opc-d.c (ia64_opcodes_d): Break the "add" pattern into two
928 separate variants: one for IMM22 and the other for IMM14.
929 * ia64-asmtab.c: Regenerate.
931 2001-02-21 Greg McGary <greg@mcgary.org>
933 * cgen-opc.c (cgen_get_insn_value): Add missing `return'.
935 2001-02-20 H.J. Lu <hjl@gnu.org>
937 * Makefile.am (ia64-ic.tbl): Remove the target.
938 (ia64-raw.tbl): Likewise.
939 (ia64-waw.tbl): Likewise.
940 (ia64-war.tbl): Likewise.
941 (ia64-asmtab.c): Generate it in the source directory.
942 * Makefile.in: Regenerated.
944 2001-02-18 lars brinkhoff <lars@nocrew.org>
946 * Makefile.am: Add PDP-11 target.
947 * configure.in: Likewise.
948 * disassemble.c: Likewise.
949 * pdp11-dis.c: New file.
950 * pdp11-opc.c: New file.
952 2001-02-14 Jim Wilson <wilson@redhat.com>
954 * ia64-ic.tbl: Update from Intel. Add setf to fr-writers.
955 * ia64-asmtab.c: Regenerate.
957 Mon Feb 12 17:41:26 CET 2001 Jan Hubicka <jh@suse.cz>
959 * i386-dis.c (prefix_user_t): Add 'Y' to SSE ineger converison
963 2001-02-11 Maciej W. Rozycki <macro@ds2.pg.gda.pl>
965 * mips-dis.c (print_insn_arg): Use top four bits of the address of
966 the following instruction not of the jump itself for the jump
968 (print_mips16_insn_arg): Likewise.
970 2001-02-11 Michael Sokolov <msokolov@ivan.Harhan.ORG>
972 * Makefile.am (stamp-lib): ranlib the libopcodes.a in the build
974 * Makefile.in: Regenerate.
976 2001-02-09 Schwidefsky <schwidefsky@de.ibm.com>
978 * Makefile.am: Add linux target for S/390.
979 * Makefile.in: Likewise.
980 * configure.in: Likewise.
981 * disassemble.c: Likewise.
982 * s390-dis.c: New file.
983 * s390-mkopc.c: New file.
984 * s390-opc.c: New file.
985 * s390-opc.txt: New file.
987 2001-02-05 Jim Wilson <wilson@redhat.com>
989 * ia64-asmtab.c: Revert 2000-12-16 change.
991 2001-02-02 Patrick Macdonald <patrickm@redhat.com>
993 * fr30-desc.h: Regenerate with CGEN_MAX_SYNTAX_ELEMENTS.
994 * m32r-desc.h: Regenerate.
996 Thu Feb 1 16:29:06 MET 2001 Jan Hubicka <jh@suse.cz>
998 * i386-dis.c (dis386_att, grps): Use 'T' for push/pop
999 (putop): Handle 'T', alphabetize order, fix 'I' handling in Intel syntax
1001 2001-01-14 Alan Modra <alan@linuxcare.com.au>
1003 * hppa-dis.c (print_insn_hppa): Handle '>' and '<' arg types.
1005 2001-01-13 Nick Clifton <nickc@redhat.com>
1007 * disassemble.c: Remove spurious white space.
1009 Sat Jan 13 01:48:24 MET 2001 Jan Hubicka <jh@suse.cz>
1011 * i386-dis.c (dis386_att, disx86_64_att): Fix ret, lret and iret
1014 2001-01-11 Peter Targett <peter.targett@arccores.com>
1016 * configure.in: Add arc-ext.lo for bfd_arc_arch selection.
1017 * Makefile.am (C_FILES): Add arc-ext.c.
1018 (ALL_MACHINES) Add arc-ext.lo.
1019 (INCLUDES) Add opcode directory to list.
1020 New dependency entry for arc-ext.lo.
1021 * disassemble.c (disassembler): Correct call to
1022 arc_get_disassembler.
1023 * arc-opc.c: New update for ARC, including full base
1024 instructions for ARC variants.
1025 * arc-dis.h, arc-dis.c: New update for ARC, including
1026 extensibility functionality.
1027 * arc-ext.h, arc-ext.c: New files for handling extensibility.
1029 2001-01-10 Jan Hubicka <jh@suse.cz>
1031 * i386-dis.c (PREGRP15 - PREGRP24): New.
1032 (dis386_twobyt): Add SSE2 instructions.
1033 (twobyte_uses_SSE_prefix: Rename from ... ; add new SSE instructions.
1034 (twobyte_uses_f3_prefix): ... this one.
1035 (grps): Add SSE instructions.
1036 (prefix_user_table): Add two new slots; add SSE2 instructions.
1037 (print_insn_i386): Rename uses_f3_prefix to uses_SSE_prefix;
1038 Handle the REPNZ and Data16 prefixes as well; do proper lookup
1039 to prefix_user_table.
1040 (OP_E): Accept mfence and lfence as well.
1041 (OP_MMX): Data16 prefix turns MMX to SSE; support REX extensions.
1042 (OP_XMM): Support REX extensions.
1046 2001-01-09 Nick Clifton <nickc@redhat.com>
1048 * arm-dis.c (print_insn): Set pc to zero for instructions with
1049 a reloc associated with them.
1051 2001-01-09 Jeff Johnston <jjohnstn@redhat.com>
1053 * cgen-asm.in (parse_insn_normal): Changed syn to be
1054 CGEN_SYNTAX_CHAR_TYPE. Changed all references to *syn
1055 as character to use CGEN_SYNTAX_CHAR macro and all comparisons
1056 to '\0' to use 0 instead.
1057 * cgen-dis.in (print_insn_normal): Ditto.
1058 * cgen-ibld.in (insert_insn_normal, extract_insn_normal): Ditto.
1060 2001-01-05 Jan Hubicka <jh@suse.cz>
1062 * i386-dis.c: Add x86_64 support.
1063 (rex): New static variable.
1064 (REX_MODE64, REX_EXTX, REX_EXTY, REX_EXTZ): New constants.
1065 (USED_REX): New macro.
1066 (Ev, Ed, Rm, Iq, Iv64, Cm, Dm, Rm*, Ob64, Ov64): New macros.
1067 (OP_I64, OP_OFF64, OP_IMREG): New functions.
1068 (OP_REG, OP_OFF): Declare.
1069 (get64, get32, get32s): New functions.
1070 (r??_reg): New constants.
1071 (dis386_att): Change templates of instruction implicitly promoted
1072 to 64bit; change e?? to RMe?? for unwind RM byte instructions.
1074 (dis386_intel): Likewise.
1075 (dixx86_64_att): New table based on dis386_att.
1076 (dixx86_64_intel): New table based on dis386_intel.
1077 (names64, names8rex): New global variable.
1078 (names32, names16): Add extended registers.
1079 (prefix_user_t): Recognize rex prefixes.
1080 (prefix_name): Print REX prefixes nicely.
1081 (op_riprel): New global variable.
1082 (start_pc): Set type to bfd_vma.
1083 (print_insn_i386): Detect the 64bit mode and use proper table;
1084 move ckprefix after initializing the buffer; output unused rex prefixes;
1085 output information about target of RIP relative addresses.
1086 (putop): Support 'O' and 'I'. Update handling of "P', 'Q', 'R' and 'S';
1087 (print_operand_value): New function.
1088 (OP_E, OP_G, OP_REG, OP_I, OP_J, OP_DIR, OP_OFF, OP_D): Add support for
1089 REX prefix and new modes.
1090 (get64, get32s): New.
1091 (get32): Return bfd_signed_vma type.
1092 (set_op): Initialize the op_riprel.
1093 * disassemble.c (disassembler): Recognize the x86-64 disassembly.
1095 2001-01-03 Richard Sandiford <r.sandiford@redhat.com>
1097 cgen-dis.in (read_insn): Use bfd_get_bits()
1099 2001-01-02 Richard Sandiford <rsandifo@redhat.com>
1101 * cgen-dis.c (hash_insn_array): Use bfd_put_bits().
1102 (hash_insn_list): Likewise
1103 * cgen-ibld.in (insert_1): Use bfd_put_bits() and bfd_get_bits().
1104 (extract_1): Use bfd_get_bits().
1105 (extract_normal): Apply sign extension to both extraction
1107 * cgen-opc.c (cgen_get_insn_value): Use bfd_get_bits()
1108 (cgen_put_insn_value): Use bfd_put_bits()
1110 2000-12-28 Frank Ch. Eigler <fche@redhat.com>
1112 * cgen-asm.in (parse_insn_normal): Print better error message for
1113 instructions with missing operands.
1115 2000-12-21 Santeri Paavolainen <santtu@ssh.com>
1117 * cgen-opc.c: Include alloca.h if HAVE_ALLOCA_H is defined.
1119 2000-12-16 Nick Clifton <nickc@redhat.com>
1121 * Makefile.in: Regenerate.
1122 * aclocal.m4: Regenerate.
1123 * config.in: Regenerate.
1124 * configure.in: Add spacing.
1125 * configure: Regenerate.
1126 * ia64-asmtab.c: Regenerate.
1127 * po/opcodes.pot: Regenerate.
1129 2000-12-12 Frank Ch. Eigler <fche@redhat.com>
1131 * cgen-asm.in (@arch@_cgen_assemble_insn): Prefer printing insert-time
1132 error messages over later parse-time ones.
1134 2000-12-12 Jim Wilson <wilson@redhat.com>
1136 * ia64-dis.c (print_insn_ia64): Cast away const on ia64_free_opcode
1138 * ia64-gen.c (insert_deplist): Cast sizeof result to int.
1139 (print_dependency_table): Print NULL if semantics field not set.
1140 (insert_opcode_dependencies): Mark cmp parameter as unused.
1141 (print_main_table): Use fprintf_vma to print long long fields.
1142 (main): Mark argv paramter as unused. Convert to old style definition.
1143 * ia64-opc.c (ia64_find_dependency): Cast sizeof result to int.
1144 * ia64-asmtab.c: Regnerate.
1146 2000-12-09 Nick Clifton <nickc@redhat.com>
1148 * m32r-dis.c (print_insn): Prevent re-read of instruction from
1151 * fr30-dis.c: Regenerate.
1153 2000-12-08 Peter Targett <peter.targett@arccores.com>
1155 * configure.in: Add arc-ext.lo for bfd_arc_arch selection.
1156 * Makefile.am (C_FILES): Add arc-ext.c.
1157 (ALL_MACHINES) Add arc-ext.lo.
1158 (INCLUDES) Add opcode directory to list.
1159 New dependency entry for arc-ext.lo.
1160 * disassemble.c (disassembler): Correct call to
1161 arc_get_disassembler.
1162 * arc-opc.c: New update for ARC, including full base
1163 instructions for ARC variants.
1164 * arc-dis.h, arc-dis.c: New update for ARC, including
1165 extensibility functionality.
1166 * arc-ext.h, arc-ext.c: New files for handling extensibility.
1168 2000-12-03 Chris Demetriou cgd@sibyte.com
1170 * mips-opc.c (mips_builtin_opcodes): Use the WR_HILO, RD_HILO,
1171 MOD_HILO, and MOD_LO macros.
1173 * mips-opc.c (M1, M2): Delete.
1174 (mips_builtin_opcodes): Remove all uses of M1.
1176 * mips-opc.c (mips_builtin_opcodes): Make the dmfc2 and dmtc2
1177 instructions take "G" format second operands and use the
1179 There are mfc3 and mtc3 opcodes, so add dmfc3 and dmtc3 opcodes to
1181 Delete "sel" code operands from mfc1 and mtc1.
1182 Add MIPS64 opcode changes (dclo, dclz), and "sel" code variants
1185 2000-12-03 Ed Satterthwaite ehs@sibyte.com and
1186 Chris Demetriou cgd@sibyte.com
1188 * mips-opc.c (mips_builtin_opcodes): Finish additions
1189 for MIPS32 support, and clean up existing entries for
1190 aesthetics, consistency with the MIPS32 ISA, and
1191 with consistency the rest of the table.
1193 2000-12-01 Nick Clifton <nickc@redhat.com>
1195 * mips16-opc.c (mips16_opcodes): Add initialiser for membership
1198 2000-12-01 Chris Demetriou <cgd@sibyte.com>
1200 mips-dis.c (print_insn_arg): Handle new 'U' and 'J' argument
1201 specifiers. Update 'B' for new constant names, and remove
1203 mips-opc.c (mips_builtin_opcodes): Place "pref" and "ssnop"
1204 near the top of the array, so they are disassembled properly.
1205 Enable "ssnop" for MIPS32. Add "break" variant with 20 bit
1206 code for MIPS32. Update "clo" and "clz" to use 'U' operand
1207 specifier. Add 'H' format specifier variants for "mfc1,"
1208 "mfc2," "mfc3," "mtc1," "mtc2," and "mtc3" for MIPS32. Update
1209 MIPS32 "sdbbp" to use 'B' operand specifier. Add MIPS32
1210 "wait" variant which uses 'J' operand specifier.
1212 * mips-dis.c (set_mips_isa_type): Update to use
1213 CPU_UNKNOWN and ISA_* constants. Add bfd_mach_mips32 case.
1214 Replace bfd_mach_mips4K with bfd_mach_mips32_4k case.
1215 * mips-opc.c (I32): New constant for instructions added in
1218 (mips_builtin_opcodes) Replace all uses of P4 with I32.
1220 * mips-dis.c (set_mips_isa_type): Add cases for
1221 bfd_mach_mips5 and bfd_mach_mips64.
1222 * mips-opc.c (I64): New definitions.
1224 * mips-dis.c (set_mips_isa_type): Add case for
1227 2000-11-28 Hans-Peter Nilsson <hp@bitrange.com>
1229 * sh-dis.c (print_insn_ddt): Make insn_x, insn_y unsigned.
1230 (print_insn_ppi): Make nib1, nib2, nib3 unsigned.
1231 Initialize variable dc to NULL.
1232 (print_insn_shx): Remove unused label d_reg_n.
1234 2000-11-24 Nick Clifton <nickc@redhat.com>
1236 * arm-opc.h: Add new opcode formatting parameter 'B'.
1237 (arm_opcodes): Add XScale, v5, and v5te instructions.
1238 (thumb_opcodes): Add v5t instructions.
1240 * arm-dis.c (print_insn_arm): Handle new 'B' format
1242 (print_insn_thumb): Decode BLX(1) instruction.
1244 2000-11-21 Chris Demetriou <cgd@sibyte.com>
1246 * mips-opc.c: Fix file header comment.
1248 2000-11-14 Hans-Peter Nilsson <hp@axis.com>
1250 * cris-dis.c (cris_get_disassembler): If abfd is NULL, return
1251 print_insn_cris_with_register_prefix.
1253 2000-11-11 Alexandre Oliva <aoliva@redhat.com>
1255 * sh-opc.h: The operand of `mov.w r0, (<disp>,GBR)' is IMM1, not 0.
1257 2000-11-07 Matthew Green <mrg@redhat.com>
1259 * cgen-dis.in (print_insn): All insns which can fit into insn_value
1260 must be loaded there in their entirety.
1262 2000-10-20 Jakub Jelinek <jakub@redhat.com>
1264 * sparc-dis.c (v9a_asr_reg_names): Add v9b ASRs.
1265 (compute_arch_mask): Add v8plusb and v9b machines.
1266 (print_insn_sparc): siam mode decoding, accept ASRs up to 25.
1267 * sparc-opc.c: Support for Cheetah instruction set.
1268 (prefetch_table): Add #invalidate.
1270 2000-10-16 Nick Clifton <nickc@redhat.com>
1272 * mcore-dis.c (imsk): Change mask for OC to 0xFE00.
1274 2000-10-06 Dave Brolley <brolley@redhat.com>
1276 * fr30-desc.h: Regenerate.
1277 * m32r-desc.h: Regenerate.
1278 * m32r-ibld.c: Regenerate.
1280 2000-10-05 Jim Wilson <wilson@redhat.com>
1282 * ia64-ic.tbl: Update from Intel.
1283 * ia64-asmtab.c: Regenerate.
1285 2000-10-04 Kazu Hirata <kazu@hxi.com>
1287 * ia64-gen.c: Convert C++-style comments to C-style comments.
1288 * tic54x-dis.c: Likewise.
1290 2000-09-29 Hans-Peter Nilsson <hp@axis.com>
1292 Changes to add dollar prefix to registers for files where user symbols
1293 don't have a leading underscore. Fix formatting.
1294 * cris-dis.c (REGISTER_PREFIX_CHAR): New.
1295 (format_reg): Add parameter with_reg_prefix. All callers changed.
1296 (print_with_operands): Ditto.
1297 (print_insn_cris_generic): Renamed from print_insn_cris, add
1298 parameter with_reg_prefix.
1299 (print_insn_cris_with_register_prefix,
1300 print_insn_cris_without_register_prefix, cris_get_disassembler):
1302 * disassemble.c (disassembler) [ARCH_cris]: Call cris_get_disassembler.
1304 2000-09-22 Jim Wilson <wilson@redhat.com>
1306 * ia64-opc-f.c (ia64_opcodes_f): Add fpcmp pseudo-ops for
1307 gt, ge, ngt, and nge.
1308 * ia64-asmtab.c: Regenerate.
1310 * ia64-dis.c (print_insn_ia64): Revert Aug 7 byte skip count change.
1311 * ia64-gen.c (parse_semantics): Handle IA64_DVS_STOP.
1312 (lookup_specifier): Handle "PR%, 1 to 15" and "PR%, 16 to 62".
1313 * ia64-ic.tbl, ia64-raw.tbl, ia64-war.tbl, ia64-waw.tbl: Update.
1314 * ia64-asmtab.c: Regnerate.
1316 2000-09-13 Anders Norlander <anorland@acc.umu.se>
1318 * mips-opc.c (mips_builtin_opcodes): Support cache instruction on 4K cores.
1319 Add mfc0 and mtc0 with sub-selection values.
1320 Add clo and clz opcodes.
1321 Add msub and msubu instructions for MIPS32.
1322 Add madd/maddu aliases for mad/madu for MIPS32.
1323 Support wait, deret, eret, movn, pref for MIPS32.
1324 Support tlbp, tlbr, tlbwi, tlbwr.
1327 * mips-dis.c (print_insn_arg): Print sdbbp 'm' args.
1328 (print_insn_arg): Handle 'H' args.
1329 (set_mips_isa_type): Recognize 4K.
1330 Use CPU_* defines instead of hardcoded numbers.
1332 2000-09-11 Catherine Moore <clm@redhat.com>
1334 * d30v-opc.c (d30v_operand_t): New operand type Rb2.
1335 (d30v_format_tab): Use Rb2 for modinc and moddec.
1337 2000-09-07 Catherine Moore <clm@redhat.com>
1339 * d30v-opc.c (d30v_format_tab): Use format Ra for
1342 2000-09-06 Alexandre Oliva <aoliva@redhat.com>
1344 * configure: Rebuilt with new libtool.m4.
1346 2000-09-05 Nick Clifton <nickc@redhat.com>
1348 * configure: Regenerate.
1349 * po/opcodes.pot: Regenerate.
1351 2000-08-31 Alexandre Oliva <aoliva@redhat.com>
1353 * acinclude.m4: Include libtool and gettext macros from the
1355 * aclocal.m4, configure: Rebuilt.
1357 2000-08-30 Kazu Hirata <kazu@hxi.com>
1359 * tic80-dis.c: Fix formatting.
1361 2000-08-29 Kazu Hirata <kazu@hxi.com>
1363 * w65-dis.c: Fix formatting.
1365 2000-08-28 Mark Hatle <mhatle@mvista.com>
1367 * ppc-opc.c: Add XTLB macro for a few PPC 4xx extended mnemonics.
1368 (powerpc_opcodes): Add table entries for PPC 405 instructions.
1369 Changed rfci, icbt, mfdcr, dccci, mtdcr, iccci from PPC to PPC403
1370 instructions. Added extended mnemonic mftbl as defined in the
1371 405GP manual for all PPCs.
1373 2000-08-28 Jim Wilson <wilson@redhat.com>
1375 * ia64-dis.c (print_insn_ia64): Add failed label after ia64_free_opcode
1376 call. Change last goto to use failed instead of done.
1378 2000-08-28 Dave Brolley <brolley@redhat.com>
1380 * cgen-ibld.in (cgen_put_insn_int_value): New function.
1381 (insert_normal): Allow for non-zero word_offset with CGEN_INT_INSN_P.
1382 (insert_insn_normal): Use cgen_put_insn_int_value with CGEN_INT_INSN_P.
1383 (extract_normal): Allow for non-zero word_offset with CGEN_INT_INSN_P.
1384 * cgen-dis.in (read_insn): New static function.
1385 (print_insn): Use read_insn to read the insn into the buffer and set
1387 (print_insn): in CGEN_INT_INSN_P, make sure that the entire insn is
1389 * fr30-asm.c: Regenerated.
1390 * fr30-desc.c: Regenerated.
1391 * fr30-desc.h: Regenerated.
1392 * fr30-dis.c: Regenerated.
1393 * fr30-ibld.c: Regenerated.
1394 * fr30-opc.c: Regenerated.
1395 * fr30-opc.h: Regenerated.
1396 * m32r-asm.c: Regenerated.
1397 * m32r-desc.c: Regenerated.
1398 * m32r-desc.h: Regenerated.
1399 * m32r-dis.c: Regenerated.
1400 * m32r-ibld.c: Regenerated.
1401 * m32r-opc.c: Regenerated.
1403 2000-08-28 Kazu Hirata <kazu@hxi.com>
1405 * tic30-dis.c: Fix formatting.
1407 2000-08-27 Kazu Hirata <kazu@hxi.com>
1409 * sh-dis.c: Fix formatting.
1411 2000-08-24 David Edelsohn <dje@watson.ibm.com>
1413 * ppc-opc.c (powerpc_opcodes): Add rfid, mtsrd, mtsrdin, mtmsrd.
1415 2000-08-24 Kazu Hirata <kazu@hxi.com>
1417 * z8k-dis.c: Fix formatting.
1419 2000-08-16 Jim Wilson <wilson@redhat.com>
1421 * ia64-ic.tbl (pr-readers-nobr-nomovpr): Add addl, adds. Delete
1422 break, mov-immediate, nop.
1423 * ia64-opc-f.c: Delete fpsub instructions.
1424 * ia64-opc-m.c: Add POSTINC to all instructions with postincrement
1425 address operand. Rewrite using macros to avoid long lines.
1426 * ia64-opc.h (POSTINC): Define.
1427 * ia64-asmtab.c: Regenerate.
1429 2000-08-15 Jim Wilson <wilson@redhat.com>
1431 * ia64-ic.tbl: Add missing entries.
1433 2000-08-08 Jason Eckhardt <jle@redhat.com>
1435 * i860-dis.c (print_br_address): Change third argument from int
1438 2000-08-07 Richard Henderson <rth@redhat.com>
1440 * ia64-dis.c (print_insn_ia64): Get byte skip count correct
1441 for MLI templates. Handle IA64_OPND_TGT64.
1443 2000-08-04 Ben Elliston <bje@redhat.com>
1445 * cgen-dis.in, cgen-asm.in, cgen-ibld.in: New files.
1446 * cgen.sh: Likewise.
1448 2000-08-02 Jim Wilson <wilson@redhat.com>
1450 * ia64-dis.c (print_insn_ia64): Call ia64_free_opcode at end.
1452 2000-07-29 Marek Michalkiewicz <marekm@linux.org.pl>
1454 * avr-dis.c (avr_operand): Use PARAMS macro in declaration.
1455 Change return type from void to int. Check the combination
1456 of operands, return 1 if valid. Fix to avoid BUF overflow.
1457 Report undefined combinations of operands in COMMENT.
1458 Report internal errors to stderr. Output the adiw/sbiw
1459 constant operand in both decimal and hex.
1460 (print_insn_avr): Disassemble ldd/std with displacement of 0
1461 as ld/st. Check avr_operand () return value, handle invalid
1462 combinations of operands like unknown opcodes.
1464 2000-07-28 Ben Elliston <bje@redhat.com>
1466 * Makefile.am (CGEN, CGENDEPS, CGENDIR, CGENFLAGS): New.
1467 (run-cgen, stamp-m32r, stamp-fr30): New targets.
1468 * Makefile.in: Regenerate.
1469 * configure.in: Add --enable-cgen-maint option.
1470 * configure: Regenerate.
1472 2000-07-26 Dave Brolley <brolley@redhat.com>
1474 * cgen-opc.c (cgen_hw_lookup_by_name): 'i' is now unsigned.
1475 (cgen_hw_lookup_by_num): Ditto.
1476 (cgen_operand_lookup_by_name): Ditto.
1477 (print_address): Ditto.
1478 (print_keyword): Ditto.
1479 * cgen-dis.c (hash_insn_array): Mark unused parameters with
1481 * cgen-asm.c (hash_insn_array): Mark unused parameters with
1483 (cgen_parse_keyword): Ditto.
1485 2000-07-22 Jason Eckhardt <jle@redhat.com>
1487 * i860-dis.c: New file.
1488 (print_insn_i860): New function.
1489 (print_br_address): New function.
1490 (sign_extend): New function.
1491 (BITWISE_OP): New macro.
1492 (I860_REG_PREFIX): New macro.
1493 (grnames, frnames, crnames): New structures.
1495 * disassemble.c (ARCH_i860): Define.
1496 (disassembler): Add check for bfd_arch_i860 to set disassemble
1497 function to print_insn_i860.
1499 * Makefile.in (CFILES): Added i860-dis.c.
1500 (ALL_MACHINES): Added i860-dis.lo.
1501 (i860-dis.lo): New dependences.
1503 * configure.in: New bits for bfd_i860_arch.
1505 * configure: Regenerated.
1507 2000-07-20 Hans-Peter Nilsson <hp@axis.com>
1509 * Makefile.am (CFILES): Add cris-dis.c and cris-opc.c.
1510 (ALL_MACHINES): Add cris-dis.lo and cris-opc.lo.
1511 (cris-dis.lo, cris-opc.lo): New rules.
1512 * Makefile.in: Rebuild.
1513 * configure.in (bfd_cris_arch): New target.
1514 * configure: Rebuild.
1515 * disassemble.c (ARCH_cris): Define.
1516 (disassembler): Support ARCH_cris.
1517 * cris-dis.c, cris-opc.c: New files.
1518 * po/POTFILES.in, po/opcodes.pot: Regenerate.
1520 2000-07-11 Jakub Jelinek <jakub@redhat.com>
1522 * sparc-opc.c (sparc_opcodes): popc has 0 in rs1, not rs2.
1523 Reported by Bill Clarke <llib@computer.org>.
1525 2000-07-09 Geoffrey Keating <geoffk@redhat.com>
1527 * ppc-opc.c (powerpc_opcodes): Correct suffix for vslw.
1528 Patch by Randall J Fisher <rfisher@ecn.purdue.edu>.
1530 2000-07-09 Alan Modra <alan@linuxcare.com.au>
1532 * hppa-dis.c (fput_reg, fput_fp_reg, fput_fp_reg_r, fput_creg,
1533 fput_const, extract_3, extract_5_load, extract_5_store,
1534 extract_5r_store, extract_5R_store, extract_10U_store,
1535 extract_5Q_store, extract_11, extract_14, extract_16, extract_21,
1536 extract_12, extract_17, extract_22): Prototype.
1537 (print_insn_hppa): Rename inner block opcode -> opc to avoid
1538 shadowing outer block.
1541 2000-07-05 DJ Delorie <dj@redhat.com>
1545 2000-07-04 Alexandre Oliva <aoliva@redhat.com>
1547 * arm-dis.c (print_insn_arm): Output combinations of PSR flags.
1549 2000-07-03 Marek Michalkiewicz <marekm@linux.org.pl>
1551 * avr-dis.c (avr_operand): Change _ () to _() around all strings
1552 marked for translation (exception from the usual coding style).
1553 (print_insn_avr): Initialize insn2 to avoid warnings.
1555 2000-07-03 Kazu Hirata <kazu@hxi.com>
1557 * h8300-dis.c (bfd_h8_disassemble): Improve readability.
1558 * h8500-dis.c: Fix formatting.
1560 2000-07-01 Alan Modra <alan@linuxcare.com.au>
1562 * Makefile.am (DEP): Fix 2000-06-22. grep after running dep.sed
1563 (CLEANFILES): Add DEPA.
1564 * Makefile.in: Regenerate.
1566 2000-06-26 Scott Bambrough <scottb@netwinder.org>
1568 * arm-dis.c (regnames): Add an additional register set to match
1569 the set used by GCC. Make it the default.
1571 2000-06-22 Alan Modra <alan@linuxcare.com.au>
1573 * Makefile.am (DEP): grep for leading `/' in DEP1, and fail if we
1575 * Makefile.in: Regenerate.
1577 2000-06-20 H.J. Lu <hjl@gnu.org>
1579 * Makefile.am: Rebuild dependency.
1580 * Makefile.in: Rebuild.
1582 2000-06-18 Stephane Carrez <stcarrez@worldnet.fr>
1584 * Makefile.in, configure: regenerate
1585 * disassemble.c (disassembler): Recognize ARCH_m68hc12,
1587 * m68hc11-dis.c (read_memory, print_insn, print_insn_m68hc12):
1589 * configure.in: Recognize m68hc12 and m68hc11.
1590 * m68hc11-dis.c, m68hc11-opc.c: New files for support of m68hc1x
1591 * Makefile.am (CFILES, ALL_MACHINES): New files for disassembly
1592 and opcode generation for m68hc11 and m68hc12.
1594 2000-06-16 Nick Duffek <nsd@redhat.com>
1596 * disassemble.c (disassembler): Refer to the PowerPC 620 using
1597 bfd_mach_ppc_620 instead of 620.
1599 2000-06-12 Kazu Hirata <kazu@hxi.com>
1601 * h8300-dis.c: Fix formatting.
1602 (bfd_h8_disassemble): Distinguish adds/subs, inc/dec.[wl]
1605 2000-06-09 Denis Chertykov <denisc@overta.ru>
1607 * avr-dis.c (avr_operand): Bugfix for jmp/call address.
1609 2000-06-07 Denis Chertykov <denisc@overta.ru>
1611 * avr-dis.c: completely rewritten.
1613 2000-06-02 Kazu Hirata <kazu@hxi.com>
1615 * h8300-dis.c: Follow the GNU coding style.
1616 (bfd_h8_disassemble) Fix a typo.
1618 2000-06-01 Kazu Hirata <kazu@hxi.com>
1620 * h8300-dis.c (bfd_h8_disassemble_init): Fix a typo.
1621 (bfd_h8_disassemble): Distinguish the operand size of inc/dev.[wl]
1622 correctly. Fix a typo.
1624 2000-05-31 Nick Clifton <nickc@redhat.com>
1626 * opintl.h (_(String)): Explain why dgettext is used instead of
1629 2000-05-30 Nick Clifton <nickc@redhat.com>
1631 * opintl.h (gettext, dgettext, dcgettext, textdomain,
1632 bindtextdomain): Replace defines with those from intl/libgettext.h
1633 to quieten gcc warnings.
1635 2000-05-26 Alan Modra <alan@linuxcare.com.au>
1637 * Makefile.am: Update dependencies with "make dep-am"
1638 * Makefile.in: Regenerate.
1640 2000-05-25 Alexandre Oliva <aoliva@redhat.com>
1642 * m10300-dis.c (disassemble): Don't assume 32-bit longs when
1643 sign-extending operands.
1645 2000-05-15 Donald Lindsay <dlindsay@redhat.com>
1647 * d10v-opc.c (d10v_opcodes): add ALONE tag to all short branches
1650 2000-05-21 Nick Clifton <nickc@redhat.com>
1652 * Makefile.am (LIBIBERTY): Define.
1654 2000-05-19 Diego Novillo <dnovillo@redhat.com>
1656 * mips-dis.c (REGISTER_NAMES): Rename to STD_REGISTER_NAMES.
1657 (STD_REGISTER_NAMES): New name for REGISTER_NAMES.
1658 (reg_names): Rename to std_reg_names. Change it to a char **
1660 (std_reg_names): New name for reg_names.
1661 (set_mips_isa_type): Set reg_names to point to std_reg_names by
1664 2000-05-16 Frank Ch. Eigler <fche@redhat.com>
1666 * fr30-desc.h: Partially regenerated to account for changed
1667 CGEN_MAX_* -> CGEN_ACTUAL_MAX_* macros.
1668 * m32r-desc.h: Ditto.
1670 2000-05-15 Nick Clifton <nickc@redhat.com>
1672 * arm-opc.h: Use upper case for flasg in MSR and MRS
1673 instructions. Allow any bit to be set in the field_mask of
1674 the MSR instruction.
1676 * arm-dis.c (print_insn_arm): Decode _x and _s bits of the
1677 field_mask of an MSR instruction.
1679 2000-05-11 Thomas de Lellis <tdel@windriver.com>
1681 * arm-opc.h: Disassembly of thumb ldsb/ldsh
1682 instructions changed to ldrsb/ldrsh.
1684 2000-05-11 Ulf Carlsson <ulfc@engr.sgi.com>
1686 * mips-dis.c (print_insn_arg): Don't mask top 32 bits of 64-bit
1687 target addresses for 'jal' and 'j'.
1689 2000-05-10 Geoff Keating <geoffk@redhat.com>
1691 * ppc-opc.c (powerpc_opcodes): Make the predicted-branch opcodes
1692 also available in common mode when powerpc syntax is being used.
1694 2000-05-08 Alan Modra <alan@linuxcare.com.au>
1696 * m68k-dis.c (dummy_printer): Add ATTRIBUTE_UNUSED to args.
1697 (dummy_print_address): Ditto.
1699 2000-05-04 Timothy Wall <twall@redhat.com>
1701 * tic54x-opc.c: New.
1702 * tic54x-dis.c: New.
1703 * disassemble.c (disassembler): Add ARCH_tic54x.
1704 * configure.in: Added tic54x target.
1706 * Makefile.am: Add tic54x dependencies.
1707 * Makefile.in: Ditto.
1709 2000-05-03 J.T. Conklin <jtc@redback.com>
1711 * ppc-opc.c (VA, VB, VC, VD, VS, SIMM, UIMM, SHB): New macros, for
1712 vector unit operands.
1713 (VX, VX_MASK, VXA, VXA_MASK, VXR, VXR_MASK): New macros, for vector
1714 unit instruction formats.
1715 (PPCVEC): New macro, mask for vector instructions.
1716 (powerpc_operands): Add table entries for above operand types.
1717 (powerpc_opcodes): Add table entries for vector instructions.
1719 * ppc-dis.c (print_insn_big_powerpc): Add PPC_OPCODE_ALTIVEC to mask.
1720 (print_insn_little_powerpc): Likewise.
1721 (print_insn_powerpc): Prepend 'v' when printing vector registers.
1723 2000-04-24 Clinton Popetz <cpopetz@redhat.com>
1725 * configure.in: Add bfd_powerpc_64_arch.
1726 * disassemble.c (disassembler): Use print_insn_big_powerpc for
1729 2000-04-24 Nick Clifton <nickc@redhat.com>
1731 * fr30-desc.c (fr30_cgen_cpu_open): Initialise signed_overflow
1734 2000-04-23 Denis Chertykov <denisc@overta.ru>
1736 * avr-dis.c (reg_fmul_d): New. Extract destination register from
1738 (reg_fmul_r): New. Extract source register from FMUL instruction.
1739 (reg_muls_d): New. Extract destination register from MULS instruction.
1740 (reg_muls_r): New. Extract source register from MULS instruction.
1741 (reg_movw_d): New. Extract destination register from MOVW instruction.
1742 (reg_movw_r): New. Extract source register from MOVW instruction.
1743 (print_insn_avr): Handle MOVW, MULS, MULSU, FMUL, FMULS, FMULSU,
1744 EICALL, EIJMP, LPM r,Z, ELPM r,Z, SPM, ESPM instructions.
1746 2000-04-22 Timothy Wall <twall@redhat.com>
1748 * ia64-gen.c (general): Add an ordered table of primary
1749 opcode names, as well as priority fields to disassembly data
1750 structures to enforce a preferred disassembly format based on the
1751 ordering of the opcode tables.
1752 (load_insn_classes): Show a useful message if IC tables are missing.
1753 (load_depfile): Ditto.
1754 * ia64-asmtab.h (struct ia64_dis_names ): Add priority flag to
1755 distinguish preferred disassembly.
1756 * ia64-opc-f.c: Reorder some insn for preferred disassembly
1757 format. Fix incorrect flag on fma.s/fma.s.s0.
1758 * ia64-opc.c: Scan *all* disassembly matches and use the one with
1759 the highest priority.
1760 * ia64-opc-b.c: Use more abbreviations.
1761 * ia64-asmtab.c: Regenerate.
1763 2000-04-21 Jason Eckhardt <jle@redhat.com>
1765 * hppa-dis.c (extract_16): New function.
1766 (print_insn_hppa): Fix incorrect handling of 'fe'. Added handling of
1767 new operand types l,y,&,fe,fE,fx.
1769 2000-04-21 Richard Henderson <rth@redhat.com>
1770 David Mosberger <davidm@hpl.hp.com>
1771 Timothy Wall <twall@redhat.com>
1772 Bob Manson <manson@charmed.cygnus.com>
1773 Jim Wilson <wilson@redhat.com>
1775 * Makefile.am (HFILES): Add ia64-asmtab.h, ia64-opc.h.
1776 (CFILES): Add ia64-dis.c, ia64-opc-a.c, ia64-opc-b.c, ia64-opc-f.c,
1777 ia64-opc-i.c, ia64-opc-m.c, ia64-opc-d.c, ia64-opc.c, ia64-gen.c,
1779 (ALL_MACHINES): Add ia64-dis.lo, ia64-opc.lo.
1780 (ia64-ic.tbl, ia64-raw.tbl, ia64-waw.tbl, ia64-war.tbl, ia64-gen,
1781 ia64-gen.o, ia64-asmtab.c, ia64-dis.lo, ia64-opc.lo): New rules.
1782 * Makefile.in: Rebuild.
1783 * configure Rebuild.
1784 * configure.in (bfd_ia64_arch): New target.
1785 * disassemble.c (ARCH_ia64): Define.
1786 (disassembler): Support ARCH_ia64.
1787 * ia64-asmtab.c, ia64-asmtab.h, ia64-dis.c, ia64-gen.c ia64-ic.tbl,
1788 ia64-opc-a.c, ia64-opc-b.c, ia64-opc-d.c ia64-opc-f.c, ia64-opc-i.c,
1789 ia64-opc-m.c, ia64-opc-x.c, ia64-opc.c, ia64-opc.h, ia64-raw.tbl,
1790 ia64-war.tbl, ia64-waw.tbl: New files.
1792 2000-04-20 Alexandre Oliva <aoliva@redhat.com>
1794 * m10300-dis.c (HAVE_AM30, HAVE_AM33): Define.
1795 (disassemble): Use them.
1797 2000-04-14 Alan Modra <alan@linuxcare.com.au>
1799 * sysdep.h: Include "ansidecl.h" not <ansidecl.h>
1800 * Makefile.am: Update dependencies.
1801 * Makefile.in: Regenerate.
1803 2000-04-14 Michael Sokolov <msokolov@ivan.Harhan.ORG>
1805 * a29k-dis.c, alpha-dis.c, alpha-opc.c, arc-dis.c, arc-opc.c,
1806 avr-dis.c, d10v-dis.c, d10v-opc.c, d30v-dis.c, d30v-opc.c,
1807 disassemble.c, h8300-dis.c, h8500-dis.c, hppa-dis.c, i370-dis.c,
1808 i370-opc.c, i960-dis.c, m10200-dis.c, m10200-opc.c, m10300-dis.c,
1809 m10300-opc.c, m68k-dis.c, m68k-opc.c, m88k-dis.c, mcore-dis.c,
1810 mips-dis.c, mips-opc.c, mips16-opc.c, pj-dis.c, pj-opc.c,
1811 ppc-dis.c, ppc-opc.c, sh-dis.c, sparc-dis.c, sparc-opc.c,
1812 tic80-dis.c, tic80-opc.c, v850-dis.c, v850-opc.c, vax-dis.c,
1813 w65-dis.c, z8k-dis.c, z8kgen.c: Include sysdep.h. Remove
1814 ansidecl.h as sysdep.h includes it.
1816 2000-04-7 Andrew Cagney <cagney@b1.redhat.com>
1818 * configure.in (WARN_CFLAGS): Set to -W -Wall by default. Add
1819 --enable-build-warnings option.
1820 * Makefile.am (AM_CFLAGS, WARN_CFLAGS): Add definitions.
1821 * Makefile.in, configure: Re-generate.
1823 2000-04-05 J"orn Rennecke <amylaar@redhat.com>
1825 * sh-opc.h (sh_table): Use A_DISP_PC / PCRELIMM_8BY2 for ldre & ldrs.
1826 stc GBR,@-<REG_N> is available for arch_sh1_up.
1827 Group parallel processing insn with identical mnemonics together.
1828 Make three-operand psha / pshl come first.
1830 2000-04-05 J"orn Rennecke <amylaar@redhat.co.uk>
1832 * sh-opc.h (sh_nibble_type): Remove DISP_8 and DISP_4.
1833 Split IMM_[48]{,BY[24]} into IMM[01]_[48]{,BY[24]}. Add REPEAT.
1834 (sh_arg_type): Add A_PC.
1835 (sh_table): Update entries using immediates. Add repeat.
1836 * sh-dis.c (print_insn_shx): Remove DISP_8 and DISP_4.
1837 Split IMM_[48]{,BY[24]} into IMM[01]_[48]{,BY[24]}. Add REPEAT.
1839 2000-04-04 Alan Modra <alan@linuxcare.com.au>
1841 * po/opcodes.pot: Regenerate.
1843 * Makefile.am (MKDEP): Use gcc -MM rather than mkdep.
1844 (DEP): Quote when passing vars to sub-make. Add warning message
1846 (DEP1): Rewrite for "gcc -MM".
1847 (CLEANFILES): Add DEP2.
1848 Update dependencies.
1849 * Makefile.in: Regenerate.
1851 2000-04-03 Denis Chertykov <denisc@overta.ru>
1853 * avr-dis.c: Syntax cleanup.
1854 (add0fff): Print the pc relative address as a signed number.
1855 (add03f8): Likewise.
1857 2000-04-01 Ian Lance Taylor <ian@zembu.com>
1859 * disassemble.c (disassembler_usage): Don't use a prototype. Mark
1860 the parameter ATTRIBUTE_UNUSED.
1861 * ppc-opc.c: Add ATTRIBUTE_UNUSED as needed.
1863 2000-04-01 Alexandre Oliva <aoliva@redhat.com>
1865 * m10300-opc.c: SP-based offsets are always unsigned.
1867 2000-03-29 Thomas de Lellis <tdel@windriver.com>
1869 * arm-opc.h (thumb_opcodes): Disassemble 0xde.. to "bal"
1870 [branch always] instead of "undefined".
1872 2000-03-27 Nick Clifton <nickc@redhat.com>
1874 * d30v-opc.c (d30v_format_table): Move SHORT_AR to end of list of
1875 short instructions, from end of list of long instructions.
1877 2000-03-27 Ian Lance Taylor <ian@zembu.com>
1879 * Makefile.am (CFILES): Add avr-dis.c.
1880 (ALL_MACHINES): Add avr-dis.lo.
1882 2000-03-27 Alan Modra <alan@linuxcare.com>
1884 * avr-dis.c (add0fff, add03f8): Don't use structure bitfields to
1886 (print_insn_avr): Call function via pointer in K&R compatible way.
1887 (dispLDD, regPP, reg50, reg104, reg40, reg20w, lit404, lit204,
1888 add0fff, add03f8): Convert to old style function declaration and
1890 (avrdis_opcode): Add prototype.
1892 2000-03-27 Denis Chertykov <denisc@overta.ru>
1894 * avr-dis.c: New file. AVR disassembler.
1895 * configure.in (bfd_avr_arch): New architecture support.
1896 * disassemble.c: Likewise.
1897 * configure: Regenerate.
1899 2000-03-06 J"oern Rennecke <amylaar@redhat.com>
1901 * sh-opc.h (sh_table): ldre and ldrs have a *signed* displacement.
1903 2000-03-02 J"orn Rennecke <amylaar@redhat.co.uk>
1905 * d30v-dis.c (print_insn): Remove d*i hacks. Use per-operand
1906 flag to determine if operand is pc-relative.
1908 (d30v_format_table):
1909 (REL6S3): Renamed from IMM6S3.
1910 Added flag OPERAND_PCREL.
1911 (REL12S3, REL18S3, REL32): Split from IMM12S3, IMM18S3, REL32, with
1912 added flag OPERAND_PCREL.
1913 (IMM12S3U): Replaced with REL12S3.
1914 (SHORT_D2, LONG_D): Delay target is pc-relative.
1915 (SHORT_B2r, SHORT_B3r, SHORT_B3br, SHORT_D2r, LONG_Ur, LONG_2r):
1916 Split from SHORT_B2, SHORT_D2, SHORT_B3b, SHORT_D2, LONG_U, LONG_2r,
1917 using the REL* operands.
1918 (LONG_2br, LONG_Dr): Likewise, from LONG_2b, LONG_D.
1919 (SHORT_D1r, SHORT_D2Br, LONG_Dbr): Renamed from SHORT_D1, SHORT_D2B,
1920 LONG_Db, using REL* operands.
1921 (SHORT_U, SHORT_A5S): Removed stray alternatives.
1922 (d30v_opcode_table): Use new *r formats.
1924 2000-02-28 Nick Clifton <nickc@redhat.com>
1926 * m32r-desc.c (m32r_cgen_cpu_open): Replace 'flags' with
1927 'signed_overflow_ok_p'.
1929 2000-02-27 Eli Zaretskii <eliz@is.elta.co.il>
1931 * Makefile.am (stamp-lib): Use $(LIBTOOL) --config to get the
1932 name of the libtool directory.
1933 * Makefile.in: Rebuild.
1935 2000-02-24 Nick Clifton <nickc@redhat.com>
1937 * cgen-opc.c (cgen_set_signed_overflow_ok): New function.
1938 (cgen_clear_signed_overflow_ok): New function.
1939 (cgen_signed_overflow_ok_p): New function.
1941 2000-02-23 Andrew Haley <aph@redhat.com>
1943 * m32r-asm.c, m32r-desc.c, m32r-desc.h, m32r-dis.c,
1944 m32r-ibld.c, m32r-opc.h: Rebuild.
1946 2000-02-23 Linas Vepstas <linas@linas.org>
1948 * i370-dis.c, i370-opc.c: New.
1950 * disassemble.c (ARCH_i370): Define.
1951 (disassembler): Handle it.
1953 * Makefile.am: Add support for Linux/IBM 370.
1954 * configure.in: Likewise.
1956 * Makefile.in: Regenerate.
1957 * configure: Likewise.
1959 2000-02-22 Chandra Chavva <cchavva@redhat.com>
1961 * d30v-opc.c (d30v_opcode_tab) : Added FLAG_NOT_WITH_ADDSUBppp to
1962 ST2H, STB, STH, STHH, STW and ST2H opcodes to prohibit parallel
1965 2000-02-22 Andrew Haley <aph@redhat.com>
1967 * mips-dis.c (_print_insn_mips): New arg for OPCODE_IS_MEMBER:
1969 * mips-opc.c (G6): New define.
1970 (mips_builtin_op): Add "move" definition for -gp32.
1972 2000-02-22 Ian Lance Taylor <ian@zembu.com>
1974 From Grant Erickson <gerickso@Brocade.COM>:
1975 * ppc-opc.c: Correct dcread--it takes 3 arguments, not 2.
1977 2000-02-21 Alan Modra <alan@spri.levels.unisa.edu.au>
1979 * dis-buf.c (buffer_read_memory): Change `length' param and all int
1982 2000-02-17 J"orn Rennecke <amylaar@redhat.co.uk>
1984 * sh-dis.c (print_movxy, print_insn_ddt, print_dsp_reg): New functions.
1985 (print_insn_ppi): Likewise.
1986 (print_insn_shx): Use info->mach to select appropriate insn set.
1987 Add support for sh-dsp. Remove FD_REG_N support.
1988 * sh-opc.h (sh_nibble_type): Add new values for sh-dsp support.
1989 (sh_arg_type): Likewise. Remove FD_REG_N.
1990 (sh_dsp_reg_nums): New enum.
1991 (arch_sh1, arch_sh2, arch_sh3, arch_sh3e, arch_sh4): New macros.
1992 (arch_sh_dsp, arch_sh3_dsp, arch_sh1_up, arch_sh2_up): Likewise.
1993 (arch_sh3_up, arch_sh3e_up, arch_sh4_up, arch_sh_dsp_up): Likewise.
1994 (arch_sh3_dsp_up): Likewise.
1995 (sh_opcode_info): New field: arch.
1996 (sh_table): Split up insn with FD_REG_N into ones with F_REG_N and
1997 D_REG_N. Fill in arch field. Add sh-dsp insns.
1999 2000-02-14 Fernando Nasser <fnasser@totem.to.redhat.com>
2001 * arm-dis.c: Change flavor name from atpcs-special to
2002 special-atpcs to prevent name conflict in gdb.
2003 (get_arm_regname_num_options, set_arm_regname_option,
2004 get_arm_regnames): New functions. API to access the several
2005 flavor of register names. Note: Used by gdb.
2006 (print_insn_thumb): Use the register name entry from the currently
2007 selected flavor for LR and PC.
2009 2000-02-10 Nick Clifton <nickc@redhat.com>
2011 * mcore-opc.h (enum mcore_opclass): Add MULSH and OPSR
2013 (mcore_table): Add "idly4", "psrclr", "psrset", "mulsh" and
2014 "mulsh.h" instructions.
2015 * mcore-dis.c (imsk array): Add masks for MULSH and OPSR
2017 (print_insn_mcore): Add support for little endian targets.
2018 Add support for MULSH and OPSR classes.
2020 2000-02-07 Nick Clifton <nickc@redhat.com>
2022 * arm-dis.c (parse_arm_diassembler_option): Rename again.
2023 Previous delat did not take.
2025 2000-02-03 Timothy Wall <twall@redhat.com>
2027 * dis-buf.c (buffer_read_memory): Use octets_per_byte field
2028 to adjust target address bounds checking and calculate the
2029 appropriate octet offset into data.
2031 2000-01-27 Nick Clifton <nickc@redhat.com>
2033 * arm-dis.c: (parse_disassembler_option): Rename to
2034 parse_arm_disassembler_option and allow to be exported.
2036 * disassemble.c (disassembler_usage): New function: Print out any
2037 target specific disassembler options.
2038 Call arm_disassembler_options() if the ARM architecture is being
2041 * arm-dis.c (NUM_ELEM): Define this macro if not already
2043 (arm_regname): New struct type for ARM register names.
2044 (arm_toggle_regnames): Delete.
2045 (parse_disassembler_option): Use register name structure.
2046 (print_insn): New function: Combines duplicate code found in
2047 print_insn_big_arm and print_insn_little_arm.
2048 (print_insn_big_arm): Call print_insn.
2049 (print_insn_little_arm): Call print_insn.
2050 (print_arm_disassembler_options): Display list of supported,
2051 ARM specific disassembler options.
2053 2000-01-27 Thomas de Lellis <tdel@windriver.com>
2055 * arm-dis.c (printf_insn_big_arm): Treat ELF symbols with the
2056 ARM_STT_16BIT flag as Thumb code symbols.
2058 * arm-dis.c (printf_insn_little_arm): Ditto.
2060 2000-01-25 Thomas de Lellis <tdel@windriver.com>
2062 * arm-dis.c (printf_insn_thumb): Prevent double dumping
2063 of raw thumb instructions.
2065 2000-01-20 Nick Clifton <nickc@redhat.com>
2067 * mcore-opc.h (mcore_table): Add "add" as an alias for "addu".
2069 2000-01-03 Nick Clifton <nickc@cygnus.com>
2071 * arm-dis.c (streq): New macro.
2072 (strneq): New macro.
2073 (force_thumb): ew local variable.
2074 (parse_disassembler_option): New function: Parse a single, ARM
2075 specific disassembler command line switch.
2076 (parse_disassembler_option): Call parse_disassembler_option to
2077 parse individual command line switches.
2078 (print_insn_big_arm): Check force_thumb.
2079 (print_insn_little_arm): Check force_thumb.
2081 For older changes see ChangeLog-9899
2087 version-control: never