1 1999-08-04 Doug Evans <devans@casey.cygnus.com>
3 * fr30-asm.c,fr30-desc.h,fr30-dis.c,fr30-ibld.c,fr30-opc.c: Rebuild.
4 * m32r-asm.c,m32r-desc.h,m32r-dis.c,m32r-ibld.c,m32r-opc.c: Rebuild.
5 * m32r-opinst.c: Rebuild.
7 Sat Aug 28 00:27:24 1999 Jerry Quinn <jquinn@nortelnetworks.com>
9 * hppa-dis.c (print_insn_hppa): Replace 'f' by 'v'. Prefix float
12 * hppa-dis.c (print_insn_hppa): Add args q, %, !, and |.
14 * hppa-dis.c (MASK_10, read_write_names, add_compl_names,
15 extract_10U_store): New.
16 (print_insn_hppa): Add new completers.
18 * hppa-dis.c (signed_unsigned_names,mix_half_names,
19 saturation_names): New.
20 (print_insn_hppa): Add completer codes 'a', 'ch', 'cH', 'cS', and 'c*'.
22 * hppa-dis.c (print_insn_hppa): Place completers behind prefix 'c'.
24 * hppa-dis.c (print_insn_hppa): Add cases for '.', '~'. '$'. and '!'
26 * hppa-dis.c (print_insn_hppa): Look at next arg instead of bits
27 to decide to print a space.
29 1999-08-21 Alan Modra <alan@spri.levels.unisa.edu.au>
31 * i386-dis.c: Add AMD athlon instruction support.
33 1999-08-10 Ian Lance Taylor <ian@zembu.com>
35 From Wally Iimura <iimura@microunity.com>:
36 * dis-buf.c (buffer_read_memory): Rewrite expression to avoid
37 overflow at end of address space.
38 (generic_print_address): Use sprintf_vma.
40 1999-08-08 Ian Lance Taylor <ian@zembu.com>
42 * Makefile.am: Rename .dep* files to DEP*. Change DEP variable to
43 MKDEP. Rebuild dependencies.
44 * Makefile.in: Rebuild.
46 Fri Aug 6 09:46:35 1999 Jerry Quinn <jquinn@nortelnetworks.com>
48 * hppa-dis.c (compare_cond_64_names, cmpib_cond_64_names,
49 add_cond_64_names, wide_add_cond_names, logical_cond_64_names,
50 unit_cond_64_names, shift_cond_64_names, bb_cond_64_names): New.
51 (print_insn_hppa): Add 64 bit condition completers.
53 Thu Aug 5 16:59:58 1999 Jerry Quinn <jquinn@nortelnetworks.com>
55 * hppa-dis.c (print_insn_hppa): Change condition args to use
58 Wed Jul 28 04:33:58 1999 Jerry Quinn <jquinn@nortelnetworks.com>
60 * hppa-dis.c (print_insn_hppa): Remove unnecessary test in 'E'
63 1999-07-21 Ian Lance Taylor <ian@zembu.com>
66 * configure.bat: Remove; obsolete.
68 1999-07-11 Ian Lance Taylor <ian@zembu.com>
70 * dis-buf.c: Add ATTRIBUTE_UNUSED as appropriate.
71 (generic_strcat_address): Add cast to avoid warning.
72 * i386-dis.c: Initialize all structure fields to avoid warnings.
73 Add ATTRIBUTE_UNUSED as appropriate.
75 1999-07-08 Jakub Jelinek <jj@ultra.linux.cz>
77 * sparc-dis.c (print_insn_sparc): Differentiate between
78 addition and oring when guessing symbol for comment.
80 1999-07-05 Nick Clifton <nickc@cygnus.com>
82 * arm-dis.c (print_insn_arm): Display hex equivalent of rotated
85 1999-06-23 Alan Modra <alan@spri.levels.unisa.edu.au>
87 * i386-dis.c: Mention intel mode specials in macro char comment.
89 1999-06-21 Ian Lance Taylor <ian@zembu.com>
91 * alpha-dis.c: Don't include <stdlib.h>.
92 * arm-dis.c: Include "sysdep.h".
93 * tic30-dis.c: Don't include <stdlib.h> or <string.h>. Include
95 * Makefile.am: Rebuild dependencies.
96 * Makefile.in: Rebuild.
98 1999-06-16 Nick Clifton <nickc@cygnus.com>
100 * arm-dis.c (print_insn_arm): Add detection of IMB and IMBRange
103 1999-06-14 Nick Clifton <nickc@cygnus.com> & Drew Mosley <dmoseley@cygnus.com>
105 * arm-dis.c (arm_regnames): Turn into a pointer to a register
107 (arm_regnames_standard): New variable: Array of ARM register
108 names according to ARM instruction set nomenclature.
109 (arm_regnames_apcs): New variable: Array of ARM register names
110 according to ARM Procedure Call Standard.
111 (arm_regnames_raw): New variable: Array of ARM register names
112 using just 'r' and the register number.
113 (arm_toggle_regnames): New function: Toggle the chosen register set
115 (parse_disassembler_options): New function: Parse any target
116 disassembler command line options.
117 (print_insn_big_arm): Call parse_disassembler_options if any
119 (print_insn_little_arm): Call parse_disassembler_options if any
122 1999-06-13 Ian Lance Taylor <ian@zembu.com>
124 * i386-dis.c (FWAIT_OPCODE): Define.
125 (used_prefixes): New static variable.
126 (fetch_data): Don't print an error message if we have already
127 fetched some bytes successfully.
128 (ckprefix): Clear used_prefixes. Use FWAIT_OPCODE, not 0x9b.
129 (prefix_name): New static function.
130 (print_insn_i386): If setjmp fails, indicating a data error, but
131 we have managed to fetch some bytes, print the first one as a
132 prefix or a .byte pseudo-op. If fwait is followed by a non
133 floating point instruction, print the first prefix. Set
134 used_prefixes when prefixes are used. If any prefixes were not
135 used after disassembling the instruction, print the first prefix
136 instead of printing the instruction.
137 (putop): Set used_prefixes when prefixes are used.
138 (append_seg, OP_E, OP_G, OP_REG, OP_I, OP_sI, OP_J): Likewise.
139 (OP_DIR, OP_SIMD_Suffix): Likewise.
141 1999-06-07 Jakub Jelinek <jj@ultra.linux.cz>
143 * sparc-opc.c: Fix up set, setsw, setuw operand kinds.
144 Support signx %reg, clruw %reg.
146 1999-06-07 Jakub Jelinek <jj@ultra.linux.cz>
148 * sparc-opc.c: Add aliases Solaris as supports.
150 Mon Jun 7 12:04:52 1999 Andreas Schwab <schwab@issan.cs.uni-dortmund.de>
152 * Makefile.am (CFILES): Add arc-{dis,opc}.c and v850-{dis,opc}.c.
153 * Makefile.in: Regenerated.
155 1999-06-03 Philip Blundell <philb@gnu.org>
157 * arm-dis.c (print_insn_arm): Make LDRH/LDRB consistent with LDR
158 when target is PC-relative.
160 1999-05-28 Linus Nordberg <linus.nordberg@canit.se>
162 * m68k-opc.c: Rename MACL/MSACL to MAC/MSAC. Add MACM/MSACM. Add
165 * m68k-dis.c (fetch_arg): Add places `n', `o'.
167 * m68k-opc.c: Add MSAC, MACL, MOVE to/from ACC, MACSR, MASK.
168 Add mcf5206e to appropriate instructions.
169 Add alias for MAC, MSAC.
171 * m68k-dis.c (print_insn_arg): Add formats `E', `G', `H' and place
174 * m68k-opc.c (m68k_opcodes): Add divsw, divsl, divuw, divul, macl,
175 macw, remsl, remul for mcf5307. Change mcf5200 --> mcf.
177 * m68k-dis.c: Add format `u' and places `h', `m', `M'.
179 1999-05-18 Alan Modra <alan@spri.levels.unisa.edu.au>
181 * i386-dis.c (Ed): Define.
182 (dis386_twobyte_att, dis386_twobyte_intel): Use Ed for movd.
184 (OP_rm): Rename to OP_Rd.
187 (putop): Add const to template and p.
188 (print_insn_x86): Delete.
189 (print_insn_i386): Merge old function print_insn_x86. Add const
191 (struct dis386): Add const to name.
192 (dis386_att, dis386_intel): Add const.
193 (dis386_twobyte_att, dis386_twobyte_intel): Add const.
194 (names32, names16, names8, names_seg, index16): Add const.
195 (grps, prefix_user_table, float_reg): Add const.
196 (float_mem_att, float_mem_intel): Add const.
197 (oappend): Add const to s.
198 (OP_REG): Add const to s.
199 (ptr_reg): Add const to s.
200 (dofloat): Add const to dp.
201 (OP_C): Don't skip modrm, it's now done in OP_Rd.
204 (OP_Rd): Check for valid mod. Call Op_E to print.
205 (OP_E): Handle d_mode arg. Check for bad sfence,lea,lds etc.
206 (OP_MS): Check for valid mod. Call Op_EM to print.
207 (OP_3DNowSuffix): Set obufp and use oappend rather than
208 strcat. Call BadOp() for errors.
209 (OP_SIMD_Suffix): Likewise.
210 (BadOp): New function.
212 1999-05-12 Alan Modra <alan@spri.levels.unisa.edu.au>
214 * i386-dis.c (dis386_intel): Remove macro chars, except for
215 jEcxz. Change cWtR and cRtd to cW and cR.
216 (dis386_twobyte_intel): Remove macro chars here too.
217 (putop): Handle R and W macros for intel mode.
219 * i386-dis.c (SIMD_Fixup): New function.
220 (dis386_twobyte_att): Use it on movlps and movhps, and change
221 Ev to EX on these insns. Change movmskps Ev, XM to Gv, EX.
222 (dis386_twobyte_intel): Same here.
224 * i386-dis.c (Av): Remove.
228 (OP_SIMD_Suffix): New function.
229 (OP_DIR): Remove dead code.
230 (eAX_reg..eDI_reg): Renumber.
231 (onebyte_has_modrm): Table numbering comments.
232 (INTERNAL_DISASSEMBLER_ERROR): Move to before print_insn_x86.
233 (print_insn_x86): Move all prefix oappends to after uses_f3_prefix
234 checks. Print error on invalid dp->bytemode2. Remove simd_cmp,
235 and handle SIMD cmp insns in OP_SIMD_Suffix.
236 (info->bytes_per_line): Bump from 5 to 6.
238 (OP_E): Use INTERNAL_DISASSEMBLER_ERROR. Handle sfence.
239 (OP_3DNowSuffix): Ensure mnemonic index unsigned.
241 PIII SIMD support from Doug Ledford <dledford@redhat.com>
242 * i386-dis.c (XM, EX, None): Define.
243 (OP_XMM, OP_EX, OP_None): New functions.
244 (USE_GROUPS, USE_PREFIX_USER_TABLE): Define.
245 (GRP14): Rename to GRPAMD.
246 (GRP*): Add USE_GROUPS flag.
248 (dis386_twobyte_att, dis386_twobyte_intel): Add SIMD insns.
249 (twobyte_has_modrm): Add SIMD entries.
250 (twobyte_uses_f3_prefix, simd_cmp_op, prefix_user_table): New.
251 (grps): Add SIMD insns.
252 (print_insn_x86): New vars uses_f3_prefix and simd_cmp. Don't
253 oappend repz if uses_f3_prefix. Add code to handle new groups for
256 From Maciej W. Rozycki <macro@ds2.pg.gda.pl>
257 * i386-dis.c (dis386_att, dis386_intel): Change 0xE8 call insn
258 operand from Av to Jv.
260 1999-05-07 Nick Clifton <nickc@cygnus.com>
262 * mcore-dis.c (print_insn_mcore): Use .short to display
263 unidentified instructions, not .word.
265 1999-04-26 Tom Tromey <tromey@cygnus.com>
267 * aclocal.m4, configure: Updated for new version of libtool.
269 1999-04-14 Doug Evans <devans@casey.cygnus.com>
271 * fr30-desc.c,fr30-desc.h,fr30-dis.c,fr30-ibld.c,fr30-opc.c: Rebuild.
272 * m32r-desc.c,m32r-desc.h,m32r-dis.c,m32r-ibld.c,m32r-opc.c: Rebuild.
274 Mon Apr 12 23:46:17 1999 Jeffrey A Law (law@cygnus.com)
276 * hppa-dis.c (print_insn_hppa, case '3'): New case for PA2.0
279 1999-04-10 Doug Evans <devans@casey.cygnus.com>
281 * fr30-desc.c,fr30-desc.h,fr30-ibld.c: Rebuild.
282 * m32r-desc.c,m32r-desc.h,m32r-opinst.c: Rebuild.
284 1999-04-06 Ian Lance Taylor <ian@zembu.com>
286 * opintl.h (LC_MESSAGES): Never define.
288 1999-04-04 Ian Lance Taylor <ian@zembu.com>
290 * i386-dis.c (intel_syntax, open_char, close_char): Make static.
291 (separator_char, scale_char): Likewise.
292 (print_insn_x86): Likewise.
293 (print_insn_i386): Likewise. Add declaration.
295 1999-03-26 Doug Evans <devans@casey.cygnus.com>
297 * fr30-dis.c: Rebuild.
298 * m32r-dis.c: Rebuild.
300 1999-03-23 Ian Lance Taylor <ian@zembu.com>
302 * m68k-opc.c: Change compare instructions to use "@s" rather than
303 ";s" when used with an immediate operand.
305 1999-03-22 Doug Evans <devans@casey.cygnus.com>
307 * cgen-opc.c (cgen_set_cpu): Delete.
308 (cgen_lookup_insn): max_insn_size renamed to max_insn_bitsize.
309 * fr30-desc.c,fr30-desc.h,fr30-dis.c,fr30-ibld.c,fr30-opc.c,fr30-opc.h:
311 * m32r-desc.c,m32r-desc.h,m32r-dis.c,m32r-ibld.c,m32r-opc.c,m32r-opc.h:
313 * po/opcodes.pot: Rebuild.
315 1999-03-16 Martin Hunt <hunt@cygnus.com>
317 * d30v-opc.c (mvtsys): Remove FLAG_LKR.
319 1999-03-11 Doug Evans <devans@casey.cygnus.com>
321 * cgen-opc.c (cgen_set_cpu): New arg `isa'. All callers updated.
322 (cgen_operand_lookup_by_name,cgen_operand_lookup_by_num): New fns.
323 (cgen_get_insn_operands): Rewrite test for hardcoded/operand index.
324 * fr30-asm.c,fr30-desc.c,fr30-desc.h,fr30-dis.c,fr30-ibld.c: Rebuild.
325 * m32r-asm.c,m32r-desc.c,m32r-desc.h,m32r-dis.c,m32r-ibld.c: Rebuild.
326 * m32r-opinst.c: Rebuild.
328 1999-02-25 Doug Evans <devans@casey.cygnus.com>
330 * cgen-opc.c (cgen_hw_lookup_by_name): Rewrite.
331 (cgen_hw_lookup_by_num): Rewrite.
332 * fr30-desc.c,fr30-desc.h,fr30-dis.c,fr30-ibld.c,fr30-opc.c: Rebuild.
333 * m32r-desc.c,m32r-desc.h,m32r-dis.c,m32r-ibld.c,m32r-opc.c: Rebuild.
334 * m32r-opinst.c: Rebuild.
336 Sat Feb 13 14:06:19 1999 Richard Henderson <rth@cygnus.com>
338 * alpha-opc.c: Add sqrt+flags patterns. Add EV6 PALcode insns.
339 (insert_jhint): Fix insertion mask.
340 * alpha-dis.c (print_insn_alpha): Disassemble EV6 PALcode insns.
342 1999-02-10 Doug Evans <devans@casey.cygnus.com>
344 * Makefile.in: Rebuild.
346 1999-02-09 Doug Evans <devans@casey.cygnus.com>
348 * i960c-asm.c,i960c-dis.c,i960c-opc.c,i960c-opc.h: Delete.
349 * i960-dis.c (print_insn_i960): Rename from print_insn_i960_orig.
350 * Makefile.am: Remove references to them.
351 (HFILES): Add fr30-desc.h,m32r-desc.h.
352 (CFILES): Add fr30-desc.c,fr30-ibld.c,m32r-desc.c,m32r-ibld.c,
354 (ALL_MACHINES): Update.
355 * configure.in: Redo handling of cgen_files.
356 (bfd_i960_arch): Delete i960c-*.lo files.
357 * configure: Regenerate.
358 * cgen-asm.c (*): CGEN_OPCODE_DESC renamed to CGEN_CPU_DESC.
359 (hash_insn_array): Rewrite.
360 * cgen-dis.c (*): CGEN_OPCODE_DESC renamed to CGEN_CPU_DESC.
361 (hash_insn_array): Rewrite.
362 * cgen-opc.c (*): CGEN_OPCODE_DESC renamed to CGEN_CPU_DESC.
363 (cgen_lookup_insn,cgen_get_insn_operands): Define here.
364 (cgen_lookup_get_insn_operands): Ditto.
365 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerate.
366 * m32r-asm.c,m32r-dis.c,m32r-opc.c,m32r-opc.h: Regenerate.
367 * po/POTFILES.in: Rebuild.
368 * po/opcodes.pot: Rebuild.
370 Fri Feb 5 00:04:24 1999 Ian Lance Taylor <ian@cygnus.com>
372 * Makefile.am: Rebuild dependencies.
373 (HFILES): Add fr30-opc.h.
374 (CFILES): Add fr30-asm.c, fr30-dis.c, fr30-opc.c.
375 * Makefile.in: Rebuild.
377 * configure.in: Change AC_PREREQ to 2.13. Remove AM_CYGWIN32.
378 Change AM_EXEEXT to AC_EXEEXT and AM_PROG_INSTALL to
380 * acconfig.h: Remove.
381 * configure: Rebuild with current autoconf/automake.
382 * aclocal.m4: Likewise.
383 * config.in: Likewise.
384 * Makefile.in: Likewise.
386 Thu Feb 4 13:48:52 1999 Ian Lance Taylor <ian@cygnus.com>
388 * m68k-opc.c: Correct move (not movew) to status word on 5200.
390 Mon Feb 1 20:54:36 1999 Catherine Moore <clm@cygnus.com>
392 * disassemble.c (disassembler): Handle bfd_mach_i386_i386_intel_syntax.
393 * i386-dis.c (x_mode): Define.
397 (dis386_twobyte): Remove.
398 (dis386_twobyte_att): New.
399 (dis386_twobyte_intel): New.
400 (print_insn_x86): Use new arrays.
402 (float_mem_intel): New.
403 (float_mem_att): New.
404 (dofloat): Use new float_mem arrays.
405 (print_insn_i386_att): New.
406 (print_insn_i386_intel): New.
407 (print_insn_i386): Handle bfd_mach_i386_i386_intel_syntax.
408 (putop): Handle intel syntax.
409 (OP_indirE): Handle intel syntax.
410 (OP_E): Handle intel syntax.
411 (OP_I): Handle intel syntax.
412 (OP_sI): Handle intel syntax.
413 (OP_OFF): Handle intel syntax.
417 1999-01-27 Doug Evans <devans@casey.cygnus.com>
419 * fr30-opc.h,fr30-opc.c: Rebuild.
420 * i960c-opc.h,i960c-opc.c: Rebuild.
421 * m32r-opc.c: Rebuild.
423 Tue Jan 19 18:01:54 1999 David Taylor <taylor@texas.cygnus.com>
425 * hppa-dis.c: revert HP merge changes until HP gives us
428 1999-01-19 Nick Clifton <nickc@cygnus.com>
430 * arm-dis.c (print_insn_arm): Display ARM syntax for PC relative
431 offsets as well as symbloic address.
433 Tue Jan 19 10:51:01 1999 David Taylor <taylor@texas.cygnus.com>
435 * hppa-dis.c: fix comments and some indentation.
437 1999-01-12 Doug Evans <devans@casey.cygnus.com>
439 * fr30-opc.c,i960c-opc.c: Regenerate.
441 1999-01-11 Doug Evans <devans@casey.cygnus.com>
443 * fr30-opc.c: Regenerate.
445 1999-01-06 Doug Evans <devans@casey.cygnus.com>
447 * m32r-dis.c: Regenerate.
449 1999-01-05 Doug Evans <devans@casey.cygnus.com>
451 * fr30-asm.c,fr30-dis.c,fr30-opc.h,fr30-opc.c: Regenerate.
452 * i960c-asm.c,i960c-dis.c,i960c-opc.h,i960c-opc.c: Regenerate.
453 * m32r-asm.c,m32r-dis.c,m32r-opc.h,m32r-opc.c: Regenerate.
455 1999-01-04 Jason Molenda (jsm@bugshack.cygnus.com)
457 * configure.in: Require autoconf 2.12.1 or higher.
459 1998-12-30 Gavin Romig-Koch <gavin@cygnus.com>
461 * mips16-opc.c: Mark branch insns with MIPS16_INSN_BRANCH.
463 Wed Dec 16 16:17:49 1998 Dave Brolley <brolley@cygnus.com>
465 * fr30-opc.c: Regenerated.
467 1998-12-16 Gavin Romig-Koch <gavin@cygnus.com>
469 * mips-dis.c (set_mips_isa_type): Handle bfd_mach_mips4111.
471 1998-12-15 Dave Brolley <brolley@cygnus.com>
473 * fr30-opc.c,fr30-opc.h: Regenerated.
475 1998-12-14 Dave Brolley <brolley@cygnus.com>
477 * fr30-opc.c,fr30-opc.h: Regenerated.
479 Thu Dec 10 18:39:46 1998 Dave Brolley <brolley@cygnus.com>
481 * fr30-opc.c,fr30-opc.h: Regenerated.
483 Thu Dec 10 12:49:24 1998 Doug Evans <devans@canuck.cygnus.com>
485 * m32r-opc.c: Regenerate.
487 Tue Dec 8 13:56:18 1998 David Taylor <taylor@texas.cygnus.com>
489 * dis-buf.c (generic_strcat_address): reformat to GNU coding
490 conventions. change sprintf call to an sprintf_vma call.
492 Tue Dec 8 13:12:44 1998 Dave Brolley <brolley@cygnus.com>
494 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
496 Tue Dec 8 10:50:46 1998 David Taylor <taylor@texas.cygnus.com>
498 The following changes were made by
499 Elena Zannoni <ezannoni@kwikemart.cygnus.com>,
500 David Taylor <taylor@texas.cygnus.com>, and
501 Edith Epstein <eepstein@sophia.cygnus.com> as part of a project to
502 merge in changes by HP; HP did not create ChangeLog entries.
504 * dis-buf.c (generic_strcat_address): new function.
506 * hppa-dis.c: Changes to improve hppa disassembly.
507 Changed formatting in : reg_names, fp_reg_names,control_reg,
508 New variables : sign_extension_names, deposit_names, conversion_names
509 float_test_names, compare_cond_names_double, add_cond_names_double,
510 logical_cond_names_double, unit_cond_names_double,
511 branch_push_pop_names, saturation_names, shift_names, mix_names,
512 New Macros : GET_COMPL_O, GET_PUSH_POP,MERGED_REG
513 Move some definitions to libhppa.h: GET_FIELD, GET_BIT
514 (fput_const): renamed as fput_hex_const
516 - use the macros fputs_filtered and
517 fput_decimal_const whenever possible; calls to sign_extend require
518 2 params -- add a missing second param of 0.
519 - Some new code ifdefed for LOCAL_ONLY, all related to figuring out
520 architecture version number of current machine. HP folks are
521 trying to handle situation where the target program was compiled
522 for PA 1.x (32-bit), but is running on a PA 2.0 machine and
524 - added new cases : 'g', 'B', 'm'
525 - added cases specifically for PA 2.0
526 - changed the following cases : '"', 'n', 'N', 'p', 'Z',
527 - calls to fput_const become calls to fput_hex_const
529 1998-12-07 James E Wilson <wilson@wilson-pc.cygnus.com>
531 * Makefile.am (CFILES): Add i960c-asm, i960c-dis.c, i960c-opc.c.
532 (ALL_MACHINES): Add i960c-asm.lo, i960c-dis.lo, i960-opc.lo.
533 (i960-asm.lo, i960c-dis.lo, i960c-opc.lo): New Makefile rules.
534 * Makefile.in: Rebuilt.
535 * configure.in (bfd_i960_arch): Add i960c-opc.lo, i960-asm.o,
537 * i960-dis.c (print_insn_i960): Rename to print_insn_i960_orig.
538 * i960c-asm.c, i960c-dis.c, i960c-opc.c, i960c-opc.h: New files.
540 Mon Dec 7 14:33:44 1998 Dave Brolley <brolley@cygnus.com>
542 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
544 Sun Dec 6 14:06:48 1998 Ian Lance Taylor <ian@cygnus.com>
546 * mips-opc.c (mips_builtin_opcodes): Add dmfc2 and dmtc2.
548 * ppc-opc.c (powerpc_opcodes): Add PowerPC403 GC[X] instructions.
549 From Saitoh Masanobu <msaitoh@spa.is.uec.ac.jp>.
551 Fri Dec 4 17:45:51 1998 Doug Evans <devans@canuck.cygnus.com>
553 * fr30-opc.c: Regenerate.
555 Fri Dec 4 17:08:08 1998 Dave Brolley <brolley@cygnus.com>
557 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
559 Thu Dec 3 14:26:20 1998 Dave Brolley <brolley@cygnus.com>
561 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
563 Thu Dec 3 00:09:17 1998 Doug Evans <devans@canuck.cygnus.com>
565 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerate.
567 1998-11-30 Doug Evans <devans@casey.cygnus.com>
569 * cgen-dis.c (hash_insn_array): CGEN_INSN_VALUE ->
570 CGEN_INSN_BASE_VALUE.
571 * m32r-opc.c,m32r-opc.h,m32r-asm.c,m32r-dis.c: Regenerate.
572 * fr30-opc.c,fr30-opc.h,fr30-asm.c,fr30-dis.c: Regenerate.
574 Thu Nov 26 11:26:32 1998 Dave Brolley <brolley@cygnus.com>
576 * fr30-asm.c,fr30-dis.c,fr30-opc.c: Regenerated.
578 Tue Nov 24 11:20:54 1998 Dave Brolley <brolley@cygnus.com>
580 * fr30-asm.c,fr30-dis.c: Regenerated.
582 Mon Nov 23 18:28:48 1998 Dave Brolley <brolley@cygnus.com>
584 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
586 1998-11-20 Doug Evans <devans@tobor.to.cygnus.com>
588 * fr30-opc.c: Regenerated.
590 Thu Nov 19 16:02:46 1998 Dave Brolley <brolley@cygnus.com>
592 * fr30-opc.c: Regenerated.
593 * fr30-opc.h: Regenerated.
594 * fr30-dis.c: Regenerated.
595 * fr30-asm.c: Regenerated.
597 Thu Nov 19 07:54:15 1998 Doug Evans <devans@charmed.cygnus.com>
599 * mips-opc.c (sync.p,sync.l): Swap insn values.
601 1998-11-19 Doug Evans <devans@tobor.to.cygnus.com>
603 * fr30-opc.c: Regenerate.
605 Wed Nov 18 21:36:37 1998 Dave Brolley <brolley@cygnus.com>
607 * fr30-opc.c: Regenerated.
608 * fr30-opc.h: Regenerated.
610 1998-11-18 Doug Evans <devans@casey.cygnus.com>
612 * m32r-asm.c,m32r-dis.c,m32r-opc.c: Rebuild.
613 * fr30-asm.c,fr30-dis.c,fr30-opc.c: Rebuild.
615 Wed Nov 18 11:30:04 1998 Dave Brolley <brolley@cygnus.com>
617 * fr30-opc.c: Regenerated.
619 Mon Nov 16 19:21:48 1998 Dave Brolley <brolley@cygnus.com>
621 * fr30-opc.c: Regenerated.
622 * fr30-opc.h: Regenerated.
623 * fr30-dis.c: Regenerated.
624 * fr30-asm.c: Regenerated.
626 Thu Nov 12 19:24:18 1998 Dave Brolley <brolley@cygnus.com>
628 * po/opcodes.pot: Regenerated.
629 * fr30-opc.c: Regenerated.
630 * fr30-opc.h: Regenerated.
631 * fr30-dis.c: Regenerated.
632 * fr30-asm.c: Regenerated.
634 Tue Nov 10 15:26:27 1998 Nick Clifton <nickc@cygnus.com>
636 * disassemble.c (disassembler): Add support for FR30 target.
638 Tue Nov 10 11:00:04 1998 Doug Evans <devans@canuck.cygnus.com>
640 * m32r-dis.c,m32r-opc.c,m32r-opc.h: Rebuild.
641 * fr30-dis.c,fr30-opc.c,fr30-opc.h: Rebuild.
643 Mon Nov 9 18:22:55 1998 Dave Brolley <brolley@cygnus.com>
645 * po/opcodes.pot: Regenerate.
646 * po/POTFILES.in: Regenerate.
647 * fr30-opc.c: Regenerate.
648 * fr30-opc.h: Regenerate.
650 Fri Nov 6 17:21:38 1998 Doug Evans <devans@canuck.cygnus.com>
652 * m32r-asm.c: Regenerate.
654 Wed Nov 4 18:46:47 1998 Dave Brolley <brolley@cygnus.com>
656 * configure.in: Added case for bfd_fr30_arch.
657 * Makefile.am (CFILES): Added fr30-asm.c, fr30-dis.c, fr30-opc.c.
658 (ALL_MACHINES): Added fr30-asm.lo, fr30-dis.lo, fr30-opc.lo.
659 (CLEANFILES): Added stamp-fr30.
661 * fr30-asm.c: New file.
662 * fr30-dis.c: New file.
663 * fr30-opc.c: New file.
664 * fr30-opc.h: New file.
665 * po/POTFILES.in: Regenerated
666 * po/opcodes.pot: Regenerated
668 Mon Nov 2 15:05:33 1998 Geoffrey Noer <noer@cygnus.com>
670 * configure.in: detect cygwin* instead of cygwin32*
671 * configure: regenerate
673 Tue Oct 27 08:58:37 1998 Gavin Romig-Koch <gavin@cygnus.com>
675 * mips-opc.c (IS_M): Added.
677 Mon Oct 19 13:03:19 1998 Doug Evans <devans@seba.cygnus.com>
679 * m32r-opc.c,m32r-opc.h,m32r-asm.c,m32r-dis.c: Regenerate.
681 Fri Oct 9 14:01:56 1998 Doug Evans <devans@seba.cygnus.com>
683 * m32r-opc.h,m32r-opc.c: Regenerate.
685 Sun Oct 4 21:01:44 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
687 * i386-dis.c (OP_3DNowSuffix): New static function.
690 (dis386_twobyte): Add GRP14, femms, and 3DNow entries.
691 (twobyte_has_modrm): Set entries corresponding to GRP14, 3DNow.
692 (insn_codep): New static variable.
693 (print_insn_x86): Init insn_codep after prefixes.
694 (grps): Add GRP14 entries for prefetch, prefetchw.
697 From Jeff B Epler <jepler@usgs.gov>
698 * i386-dis.c (Suffix3DNow): New table.
700 Wed Sep 30 10:17:50 1998 Nick Clifton <nickc@cygnus.com>
702 * d10v-opc.c: Treat TRAP as if it were a branch type instruction.
704 Mon Sep 28 14:35:43 1998 Martin M. Hunt <hunt@cygnus.com>
706 * d10v-dis.c (print_operand): If num is nonzero, then
707 add OPERAND_ACC1, not OPERAND_ACC0.
709 Thu Sep 24 09:20:03 1998 Nick Clifton <nickc@cygnus.com>
711 * d30v-opc.c: Add FLAG_JSR attribute to DBT, REIT, RTD, and TRAP
714 Tue Sep 22 17:55:14 1998 Nick Clifton <nickc@cygnus.com>
716 * d30v-opc.c: Add use of EITHER_BUT_PREFER_MU execution unit
719 Tue Sep 15 15:14:45 1998 Doug Evans <devans@canuck.cygnus.com>
721 * m32r-opc.h,m32r-opc.c: Add bbpc,bbpsw support.
723 1998-09-09 Michael Meissner <meissner@cygnus.com>
725 * ppc-opc.c (powerpc_opcodes): Add support for PowerPC 750 move
728 Fri Sep 4 19:42:59 1998 Nick Clifton <nickc@cygnus.com>
730 * arm-dis.c (print_insn_big_arm): Detect Thumb symbols in elf
732 (print_insn_little_arm): Detect Thumb symbols in elf object
735 Sat Aug 29 22:24:09 1998 Richard Henderson <rth@cygnus.com>
737 * alpha-dis.c (print_insn_alpha): Use the machine type to
738 decide which PALcode set to include.
740 Sun Aug 23 02:16:18 1998 Richard Henderson <rth@cygnus.com>
742 * sparc-opc.c (FBRX): Fix typo in ",a,pn %fcc3" case.
744 Fri Aug 21 16:07:52 1998 Nick Clifton <nickc@cygnus.com>
746 * d30v-opc.c (d30v_opcode_table): Add FLAG_MUL32 to MAC, MACS,
747 MSUB and MSUBS instructions.
749 Thu Aug 13 16:23:04 1998 Ian Lance Taylor <ian@cygnus.com>
751 * ppc-opc.c (powerpc_operands): Omit parens around additions in
754 Wed Aug 12 14:00:38 1998 Ian Lance Taylor <ian@cygnus.com>
756 From Peter Jeremy <peter.jeremy@auss2.alcatel.com.au>:
757 * m68k-opc.c: Correct mulsl and mulul to use q rather than D, a,
758 +, -, and d for ColdFire.
760 From Peter Thiemann <thiemann@informatik.uni-tuebingen.de>:
761 * ppc-opc.c (insert_mbe): Handle wrapping bitmasks.
762 (extract_mbe): Likewise.
764 Wed Aug 12 11:11:34 1998 Jeffrey A Law (law@cygnus.com)
766 * m10300-opc.c: Fix typo in udf20 .. udf25 instruction opcodes.
768 * m10300-opc.c: First cut at UDF instructions.
770 Mon Aug 10 14:08:22 1998 Doug Evans <devans@canuck.cygnus.com>
772 * m32r-opc.c: Regenerate (remove semantic descriptions).
774 Mon Aug 10 12:51:12 1998 Catherine Moore <clm@cygnus.com>
776 * arm-dis.c (print_insn_big_arm): Fix indentation.
777 (print_insn_little_arm): Likewise.
779 Sun Aug 9 20:17:28 1998 Catherine Moore <clm@cygnus.com>
781 * arm-dis.c (print_insn_big_arm): Check for thumb symbol
783 (print_insn_little_arm): Likewise.
785 Mon Aug 3 12:43:16 1998 Doug Evans <devans@seba.cygnus.com>
787 Move all global state data into opcode table struct, and treat
788 opcode table as something that is "opened/closed".
789 * cgen-asm.c (all fns): New first arg of opcode table descriptor.
790 (cgen_asm_init): Delete.
791 (cgen_set_parse_operand_fn): New function.
792 * cgen-dis.c (all fns): New first arg of opcode table descriptor.
793 (cgen_dis_init): Delete.
794 * cgen-opc.c (all fns): New first arg of opcode table descriptor.
795 (cgen_current_{opcode_table_mach,endian}): Delete.
796 * m32r-asm.c,m32r-dis.c,m32r-opc.c,m32r-opc.h: Regenerate.
798 Thu Jul 30 21:41:10 1998 Frank Ch. Eigler <fche@cygnus.com>
800 * d30v-opc.c (d30v_opcode_table): Add new "LKR" flag to some
803 Tue Jul 28 11:00:09 1998 Jeffrey A Law (law@cygnus.com)
805 * m10300-opc.c: Add entries for "no_match_operands" field in
808 Fri Jul 24 11:41:37 1998 Doug Evans <devans@canuck.cygnus.com>
810 * m32r-asm.c,m32r-opc.c: Regenerate (-Wall cleanups).
812 Tue Jul 21 13:41:07 1998 Doug Evans <devans@seba.cygnus.com>
814 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
816 Mon Jul 13 14:53:59 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
818 * i386-dis.c (ckprefix): Handle fwait specially only when it isn't
820 (dofloat): Correct test for fnstsw. Print `fnstsw %ax' rather
822 (OP_J): Remove unnecessary subtraction when 16-bit displacement
823 will be masked later.
825 Thu Jul 2 17:11:27 1998 Doug Evans <devans@seba.cygnus.com>
827 * m32r-opc.h (CGEN_MIN_INSN_SIZE): New #define.
829 Wed Jul 1 16:11:16 1998 Doug Evans <devans@seba.cygnus.com>
831 * m32r-asm.c,m32r-dis.c,m32r-opc.c,m32r-opc.h: Regenerate.
833 Fri Jun 26 11:08:55 1998 Jeffrey A Law (law@cygnus.com)
835 * m10300-dis.c: Only recognize instructions from the currently
837 * m10300-opc.c: Add field indicating the particular variant of
838 the mn10300 each instruction is available on.
840 Fri Jun 26 12:04:21 1998 Ian Lance Taylor <ian@cygnus.com>
842 * configure.in: For bfd_vax_arch, build vax-dis.lo.
843 * Makefile.am: Rebuild dependencies.
844 (CFILES): Add vax-dis.c.
845 (ALL_MACHINES): Add vax-dis.lo.
846 * aclocal.m4: Rebuild with current libtool.
847 * configure, Makefile.in: Rebuild.
849 Fri Jun 26 12:03:20 1998 Klaus Kaempf <kkaempf@progis.de>
851 * vax-dis.c: New file, from work by Pauline Middelink
852 <middelin@polyware.iaf.nl>.
853 * disassemble.c (ARCH_vax): Define if ARCH_all.
854 (disassembler): Add case for ARCH_vax.
855 * makefile.vms: Support compilation on vms/vax.
857 Tue Jun 23 19:42:18 1998 Mark Alexander <marka@cygnus.com>
859 * m10200-dis.c (print_insn_mn10200): Fix various non-portabilities
860 related to sign extension and the size of ints.
862 Tue Jun 23 10:59:26 1998 Jeffrey A Law (law@cygnus.com)
864 * m10300-opc.c: Support one operand "asr", "lsr" and "asl"
865 instructions. Support (sp) addressing mode by expanding it into
868 Sat Jun 20 14:46:20 1998 Frank Ch. Eigler <fche@cygnus.com>
870 * mips-dis.c (_print_insn_mips): Fix argument interchange typo.
872 Fri Jun 19 09:16:42 1998 Mark Alexander <marka@cygnus.com>
874 * m10200-dis.c (print_insn_mn10200): Recognize 'break' pseudo-op.
876 1998-06-18 Ulrich Drepper <drepper@cygnus.com>
878 * i386-dis.c: Add support for fxsave, fxrstor, sysenter and
881 Thu Jun 18 10:22:24 1998 John Metzler <jmetzler@cygnus.com>
883 * mips-dis.c (print_insn_little_mips): Previously, instruction
884 printing references the symbol table to determine whether the
885 instruction resides in a block regular instructions or mips16
886 instructions. However, when the disassembler gets used in other
887 environments where the symbol table is not present, we no longer
888 rely in the symbol table, rather, use the low bit of the
889 instructions address to guess. There should be no change for usage
890 of the disassembler in host based programs, gdb, objdump.
891 (print_insn_big_mips): ditto.
892 (print_insn_mips): ditto
894 Wed Jun 17 21:19:01 1998 Mark Alexander <marka@cygnus.com>
896 * m10200-dis.c (print_insn_mn10200): Don't bomb on unknown opcodes.
898 Wed Jun 17 17:49:23 1998 Jeffrey A Law (law@cygnus.com)
900 * m10300-opc.c (mn10300_opcodes): Change opcode for "syscall".
902 Tue Jun 16 13:10:51 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
904 * i386-dis.c (index16): Add '%' to register names. Use ','
907 Sat Jun 13 11:33:55 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
909 * i386-dis.c: Don't print opcode suffix when we can figure out the
910 size (and gas can!) by register operands, or from the default
912 (putop): Handle 'A', 'B', 'L', 'P', 'Q', 'R' macros. Rename 'C'
914 (dis386, dis386_twobyte, grps): Use new suffix macros.
915 (dis386): Correct imul Ib to imul sIb. Change jnl to jge to be
916 consistent. Add suffix for call, jmp, lcall, ljmp, iret. Reverse
917 order of cmps operands to agree with Intel docs. Correct operand
918 of aad and aam (Ib -> sIb). Change ud2b from 0fb8 to 0fb9 to
919 agree with Intel docs.
920 (print_insn_x86): Print orphan fwait before other prefixes.
921 Return correct byte count for orphan fwait with prefixes. Don't
922 print `bound' operands in reverse order.
923 (ckprefix): Stop accumulating prefixes if we get fwait.
924 (OP_DIR): Print `$' before Ap operands of ljmp, lcall.
926 Fri Jun 12 13:40:38 1998 Tom Tromey <tromey@cygnus.com>
928 * po/Make-in (all-yes): If maintainer mode, depend on .pot file.
929 ($(PACKAGE).pot): Unconditionally depend on POTFILES.
931 Fri Jun 12 11:04:06 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
933 Fix problems when bfd_vma is wider than long.
934 * i386-dis.c: Make op_address and start_pc unsigned.
935 (set_op): Make parameter unsigned.
936 (print_insn_x86): Cast to bfd_vma when passing a value to
938 * ns32k-dis.c (CORE_ADDR): Don't define.
939 (print_insn_ns32k): Change type of addr to bfd_vma. Use
940 bfd_scan_vma to read back address.
941 (print_insn_arg): Change type of addr to bfd_vma. Use sprintf_vma
943 * m68k-dis.c (COERCE32): Cast to bfd_signed_vma to avoid overflow.
944 (NEXTULONG): New definition.
945 (print_insn_m68k): Avoid overflow when computing third argument of
947 (print_insn_arg): Use NEXTULONG to fetch 32 bit address values.
948 Use disp instead of val to store offset values.
949 (print_indexed): Use base_disp instead of word to store base
950 displacement, to avoid overflow.
951 * m10300-dis.c (disassemble): Cast value to long when computing
952 pc-relative address, to get correct sign extension.
954 Wed Jun 10 15:58:37 1998 Doug Evans <devans@canuck.cygnus.com>
956 * m32r-opc.c: Regenerate.
958 Tue Jun 9 14:27:57 1998 Nick Clifton <nickc@cygnus.com>
960 * arm-opc.h (thumb_opcodes): Display 'add rx, rY, #0' insns as
961 'mov rX, rY'. Patch courtesy of Tony Thompson <Tony.Thompson@arm.com>
963 Mon Jun 8 18:17:21 1998 Nick Clifton <nickc@cygnus.com>
965 * d30v-opc.c: Remove FALG_MUL32 attribyte from MULX2H insn.
967 Fri Jun 5 23:47:55 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
969 * i386-dis.c: Combine aflag and dflag into sizeflag. Change OP_*
971 (OP_DSreg): Rename from OP_DSSI.
972 (OP_ESreg): Rename from OP_ESDI.
973 (Xb, Xv, Yb, Yv): Use index reg code, not b_mode or v_mode.
975 (append_seg): Rename from append_prefix.
976 (ptr_reg): New function.
977 (dis386): Add S suffix to pushf, popf, ret, lret, enter, leave.
979 (PREFIX_ADDR): Rename from PREFIX_ADR.
980 (float_reg): Add non-broken opcodes for people who don't want
983 Fri Jun 5 19:15:04 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
985 * m68k-opc.c (tstb, tstw, tstl): Don't allow pcrel on
988 Wed Jun 3 18:56:22 1998 H.J. Lu <hjl@gnu.org>
990 * i386-dis.c (dis386): Change 0x60 to "pushaS", 0x61 to "popaS".
992 Tue Jun 2 15:06:46 1998 Geoff Keating <geoffk@ozemail.com.au>
994 * ppc-opc.c (powerpc_macros): Support shifts and rotates of size
995 0; produce error message for shifts of size 32 (or 64 for 64-bit
996 shifts), because the hardware doesn't support them.
998 Wed May 27 15:29:13 1998 Nick Clifton <nickc@cygnus.com>
1000 * d30v-opc.c: Add new operand: Ra3. Change SHORT_B3, SHORT_B3b,
1001 LONG_2, LONG_2b formats to use this new operand.
1003 Tue May 26 20:47:48 1998 Stan Cox <scox@cygnus.com>
1005 * sparc-dis.c (compute_arch_mask): Added bfd_mach_sparc_sparclite_le.
1007 Tue May 26 20:45:33 1998 Mark Alexander <marka@cygnus.com>
1009 * sparc-dis.c (print_insn_sparc): big endian instruction / little
1010 endian data support.
1012 Tue May 26 16:14:39 1998 Nick Clifton <nickc@cygnus.com>
1014 * d30v-opc.c (d30v_format_table): Change definition of SHORT_B3
1015 and SHORT_B3b formats to use Rb instead of Ra.
1017 Add FLAG_MUL16 to MUL2XH opcode.
1019 Add FLAG_ADDSUBppp to SRC and SATHp opcodes to implement extension
1020 to existing 1.1.1 parallelisation prohibition procedure.
1022 Fri May 22 16:00:00 1998 Doug Evans <devans@canuck.cygnus.com>
1024 * m32r-asm.c,m32r-dis.c: Regenerate.
1026 Tue May 19 17:36:08 1998 Ian Lance Taylor <ian@cygnus.com>
1028 * mips-dis.c (print_mips16_insn_arg): Handle type ']' correctly
1029 with a shift count of 0.
1031 Fri May 15 14:58:31 1998 Doug Evans <devans@seba.cygnus.com>
1033 * cgen-opc.c (cgen_hw_lookup_by_name): Renamed from cgen_hw_lookup.
1034 (cgen_hw_lookup_by_num): New function.
1036 Wed May 13 17:03:59 1998 Doug Evans <devans@canuck.cygnus.com>
1038 * m32r-asm.c: Regenerate (handle uppercase HIGH/SHIGH/LOW/SDA).
1040 Wed May 13 14:34:31 1998 Mark Alexander <marka@cygnus.com>
1042 * sparc-dis.c (print_insn_sparc): Always fetch instructions
1043 as big-endian on SPARClite.
1045 Tue May 12 11:46:31 1998 Richard Henderson <rth@cygnus.com>
1047 * d30v-opc.c (pre_defined_register): Remove alias for r0.
1049 Sun May 10 22:37:22 1998 Jeffrey A Law (law@cygnus.com)
1051 * po/Make-in (install-info): New target.
1053 Thu May 7 17:15:59 1998 Ian Lance Taylor <ian@cygnus.com>
1055 * configure.in (WIN32LIBADD): Add -lintl on cygwin32.
1056 * configure: Rebuild.
1058 Thu May 7 12:49:46 1998 Frank Ch. Eigler <fche@cygnus.com>
1060 * mips-opc.c (teq,tge,tgeu,tlt,tltu,tne): Added three-operand
1061 variety of ISA2 instructions to set bottom ten bits of trap code.
1063 Thu May 7 11:54:25 1998 Ian Lance Taylor <ian@cygnus.com>
1065 * Makefile.am (config.status): Add explicit target so that
1066 config.status depends upon bfd/configure.in.
1067 * Makefile.in: Rebuild.
1069 Thu May 7 09:33:02 1998 Frank Ch. Eigler <fche@cygnus.com>
1071 * mips-opc.c (break, sdbbp): Added two-operand variety of ISA1
1072 instructions to set bottom ten bits of break code.
1073 * mips-dis.c (print_insn_arg): Implement 'q' operand format used
1074 for above optional argument.
1076 Wed May 6 15:30:06 1998 Klaus Kaempf <kkaempf@progis.de>
1078 * makefile.vms: Run dec c with /nodebug.
1080 Mon May 4 10:19:57 1998 Tom Tromey <tromey@cygnus.com>
1082 * Makefile.in: Rebuilt.
1083 * Makefile.am: Regenerated dependencies with mkdep.
1085 * opintl.h (_): Define as dgettext.
1087 Tue Apr 28 14:12:12 1998 Nick Clifton <nickc@cygnus.com>
1089 * cgen-asm.c: Internationalised.
1090 * m32r-asm.c: Internationalised.
1091 * m32r-dis.c: Internationalised.
1092 * m32r-opc.c: Internationalised.
1094 * aclocal.m4: Regenerated.
1095 * configure: Regenerated.
1096 * Makefile.am (POTFILES): Remove inclusion of BFD_H.
1097 * Makefile.in: Rebuild.
1098 * po/POTFILES.in: Rebuilt using rule in Makefile.in.
1099 * po/opcodes.pot: Rebuilt after changing POTFILES.in.
1101 Tue Apr 28 13:13:13 1998 Ian Lance Taylor <ian@cygnus.com>
1103 * configure.in: Call AC_ISC_POSIX near start. Move CY_GNU_GETTEXT
1105 * aclocal.m4, configure: Rebuild with current tools.
1107 Mon Apr 27 14:31:00 1998 Nick Clifton <nickc@cygnus.com>
1109 * opintl.h: New file - contains internationalisation macros used
1110 by source files in this directory.
1111 * po/: New subdirectory - contains internationalisation files.
1112 * po/Make-in: New file - Makefile constructor.
1113 * po/POTFILES.in: New file - list of files in opcodes directory
1114 that should be scan for internationalisation macros.
1115 * po/opcodes.pot: New file - list of internationisation strings
1116 found in files mentioned in po/POTFILES.in.
1117 * Makefile.am: Add rule to build po/POTFILES.in. Add SUBDIRS
1118 entry. Add intl directory to include paths.
1119 * acconfig.h: Add ENABLE_NLS, HAVE_CATGETS, HAVE_GETEXT,
1120 HAVE_STRCPY, HAVE_LC_MESSAGES
1121 * configure.in: Add rule to build Makefile in po subdirectory.
1122 * Makefile.in: Rebuilt.
1123 * aclocal.m4: Rebuilt.
1124 * config.in: Rebuilt.
1125 * configure: Rebuilt.
1126 * alpha-opc.c: Internationalised.
1127 * arc-dis.c: Internationalised.
1128 * arc-opc.c: Internationalised.
1129 * arm-dis.c: Internationalised.
1130 * cgen-asm.c: Internationalised.
1131 * d30v-dis.c: Internationalised.
1132 * dis-buf.c: Internationalised.
1133 * h8300-dis.c: Internationalised.
1134 * h8500-dis.c: Internationalised.
1135 * i386-dis.c: Internationalised.
1136 * m10200-dis.c: Internationalised.
1137 * m10300-dis.c: Internationalised.
1138 * m68k-dis.c: Internationalised.
1139 * m88k-dis.c: Internationalised.
1140 * mips-dis.c: Internationalised.
1141 * ns32k-dis.c: Internationalised.
1142 * opintl.h: Internationalised.
1143 * ppc-opc.c: Internationalised.
1144 * sparc-dis.c: Internationalised.
1145 * v850-dis.c: Internationalised.
1146 * v850-opc.c: Internationalised.
1148 Mon Apr 27 10:33:56 1998 Doug Evans <devans@seba.cygnus.com>
1150 * cgen-asm.c (cgen_current_opcode_table): Renamed from ..._data.
1151 (asm_hash_table_entries): New variable.
1152 (cgen_asm_init): Free asm_hash_table_entries.
1153 (hash_insn_array,hash_insn_list): New functions.
1154 (build_asm_hash_table): Use them. Hash macro insns as well.
1155 (cgen_asm_lookup_insn): Update.
1156 * cgen_dis.c (cgen_current_opcode_table): Renamed from ..._data.
1157 (dis_hash_table_entries): New variable.
1158 (cgen_dis_init): Free dis_hash_table_entries.
1159 (hash_insn_array,hash_insn_list): New functions.
1160 (build_dis_hash_table): Use them. Hash macro insns as well.
1161 (cgen_dis_lookup_insn): Update.
1162 * cgen-opc.c (cgen_current_opcode_table): Renamed from ..._data.
1163 (cgen_set_cpu,cgen_hw_lookup,cgen_insn_count): Update.
1164 (cgen_macro_insn_count): New function.
1165 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
1167 Fri Apr 24 16:07:57 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
1169 * i386-dis.c (OP_DSSI): Print segment override.
1171 Mon Apr 13 16:59:39 1998 Nick Clifton <nickc@cygnus.com>
1173 * arm-dis.c (print_insn_arm): Add "_all" extension to 'C'
1176 Mon Apr 13 16:50:27 1998 Ian Lance Taylor <ian@cygnus.com>
1178 * Makefile.am (libopcodes_la_LIBADD): Add @WIN32LIBADD@.
1179 (libopcodes_la_LDFLAGS): Add @WIN32LDFLAGS@.
1180 * configure.in: Define and substitute WIN32LDFLAGS and
1182 * aclocal.m4: Rebuild with new libtool.
1183 * configure, Makefile.in: Rebuild.
1185 Fri Apr 10 18:14:31 1998 Doug Evans <devans@canuck.cygnus.com>
1187 * m32r-opc.c: Regenerate.
1189 Sun Apr 5 16:04:39 1998 H.J. Lu <hjl@gnu.org>
1191 * Makefile.am (stamp-lib): Check that .libs/libopcodes.a exists
1192 before trying to copy it.
1193 * Makefile.in: Rebuild.
1195 Thu Apr 2 17:25:49 1998 Nick Clifton <nickc@cygnus.com>
1197 * m32r-opc.c: Use signed immediate values for CMPUI instruction.
1199 Wed Apr 1 16:20:27 1998 Ian Dall <Ian.Dall@dsto.defence.gov.au>
1201 * ns32k-dis.c (bit_extract_simple): New function to extract bits
1202 from an arbitrary valid buffer instead of fetching them on demand
1204 (invalid_float): use bit_extract_simple() instead of bit_extract().
1206 Tue Mar 31 11:09:08 1998 Ian Lance Taylor <ian@cygnus.com>
1208 From H.J. Lu <hjl@gnu.org>:
1209 * i386-dis.c (dis386): Change 0x8c and 0x8e to movS, and change Ew
1212 Mon Mar 30 17:32:03 1998 Ian Lance Taylor <ian@cygnus.com>
1214 * Branched binutils 2.9.
1216 Mon Mar 30 15:18:00 1998 Ken Raeburn <raeburn@cygnus.com>
1218 * d30v-dis.c (print_insn_d30v): Don't use uninitialized "num" when
1219 disassembling last 4 bytes of a section.
1221 Fri Mar 27 18:08:13 1998 Ian Lance Taylor <ian@cygnus.com>
1223 Fix some gcc -Wall warnings:
1224 * arc-dis.c (print_insn): Add casts to avoid warnings.
1225 * cgen-opc.c (cgen_keyword_lookup_name): Likewise.
1226 * d10v-dis.c (dis_long, dis_2_short): Likewise.
1227 * m10200-dis.c (disassemble): Likewise.
1228 * m10300-dis.c (disassemble): Likewise.
1229 * ns32k-dis.c (print_insn_ns32k): Likewise.
1230 * ppc-opc.c (insert_ral, insert_ram): Likewise.
1231 * cgen-dis.c (build_dis_hash_table): Remove used local variables.
1232 * cgen-opc.c (cgen_keyword_search_next): Likewise.
1233 * d10v-dis.c (dis_long, dis_2_short): Likewise.
1234 * d30v-dis.c (print_insn_d30v, lookup_opcode): Likewise.
1235 * ns32k-dis.c (bit_extract, print_insn_ns32k): Likewise.
1236 * tic80-dis.c (print_one_instruction): Likewise.
1237 * w65-dis.c (print_operand): Likewise.
1238 * z8k-dis.c (fetch_data): Likewise.
1239 * a29k-dis.c: Add return type for find_byte_func_type.
1240 * arc-opc.c: Include <stdio.h>. Remove declarations of
1241 insert_multshift and extract_multshift.
1242 * d30v-dis.c (lookup_opcode): Parenthesize assignments in
1244 (extract_value): Fully parenthesize expression.
1245 * h8500-dis.c (print_insn_h8500): Initialize local variables.
1246 * h8500-opc.h (h8500_table): Fully bracket initializer.
1247 * w65-opc.h (optable): Likewise.
1248 * i386-dis.c (print_insn_x86): Declare aflag and flag parameters.
1249 * i386-dis.c (OP_E): Initialize local variables.
1250 * m10200-dis.c (print_insn_mn10200): Likewise.
1251 * mips-dis.c (print_insn_mips16): Likewise.
1252 * sh-dis.c (print_insn_shx): Likewise.
1253 * v850-dis.c (print_insn_v850): Likewise.
1254 * ns32k-dis.c (print_insn_arg): Declare.
1255 (get_displacement, invalid_float): Declare.
1256 (list_search, sign_extend, flip_bytes): Declare return type.
1257 (get_displacement): Likewise.
1258 (print_insn_arg): Likewise. Make d int. Fix sprintf format
1260 (print_insn_ns32k): Make i unsigned.
1261 (invalid_float): Make static. Declare type of val.
1262 * tic30-dis.c (print_par_insn): Make i size_t. Don't check strlen
1263 on each for iteration.
1264 * tic30-dis.c (get_indirect_operand): Likewise.
1265 * z8k-dis.c (print_insn_z8001): Declare return type.
1266 (print_insn_z8002): Likewise.
1267 (unparse_instr): Fix sprintf format strings.
1269 Fri Mar 27 00:05:23 1998 Jeffrey A Law (law@cygnus.com)
1271 * mips-opc.c: Add "sync.l" and "sync.p".
1273 Wed Mar 25 14:32:48 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1275 * m68k-dis.c (print_insn_m68k): Use info->mach to select the
1276 default m68k variant to recognize.
1278 * i960-dis.c (pinsn): Change type of first argument to bfd_vma.
1279 (ctrl, cobr, mem, ea): Likewise.
1280 (print_addr): Likewise. Remove cast.
1281 (ea): Cast argument of print_addr to bfd_vma.
1283 * cgen-asm.c (cgen_parse_signed_integer): Fix type of local
1285 (cgen_parse_unsigned_integer): Likewise.
1286 (cgen_parse_address): Likewise.
1288 Wed Mar 25 14:31:31 1998 Ian Lance Taylor <ian@cygnus.com>
1290 * i960-dis.c (ctrl): Add full braces to structure initialization.
1291 (cobr, mem, reg): Likewise.
1292 (ea): Correct parenthesization in expression.
1294 * cgen-asm.c: Include <ctype.h>.
1295 (build_asm_hash_table): Remove unused local variable i.
1296 (cgen_parse_keyword): Add casts to avoid warnings.
1298 * arm-dis.c (print_insn_big_arm): Only call coffsymbol for a COFF
1299 symbol. Fix indentation.
1300 (print_insn_little_arm): Likewise.
1302 Fri Mar 20 18:55:18 1998 Ian Lance Taylor <ian@cygnus.com>
1304 * configure.in: Use AM_DISABLE_SHARED.
1305 * aclocal.m4, configure: Rebuild with libtool 1.2.
1307 Thu Mar 19 15:46:53 1998 Nick Clifton <nickc@cygnus.com>
1309 These patches are courtesy of Jonathan Walton and Tony Thompson
1310 (athompso@cambridge.arm.com).
1312 * arm-dis.c (print_insn_thumb): Ignore bottom two bits of PC
1315 * arm-opc.h (thumb_opcodes): Annotate PC relative addresses with
1316 both the offset and the label closest to the destination.
1318 Sat Mar 14 23:47:14 1998 Doug Evans <devans@seba.cygnus.com>
1320 * m32r-opc.h: Regenerate.
1322 Wed Mar 4 12:08:14 1998 Doug Evans <devans@canuck.cygnus.com>
1324 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
1326 Sat Feb 28 16:02:34 1998 Nick Clifton <nickc@cygnus.com>
1328 * arm-dis.c (print_insn_big_arm, print_insn_little_arm): Do not
1329 assume that info->symbols is non-empty.
1331 Sat Feb 28 12:19:05 1998 Richard Henderson <rth@cygnus.com>
1333 * alpha-opc.c (cvtqs) There is no such thing.
1334 (cvttq): Missing most of the /*d variants.
1336 Thu Feb 26 15:53:09 1998 Michael Meissner <meissner@cygnus.com>
1338 * d30v-opc.c (d30v_opcode_table): Indicate which instructions are
1339 delayed branches or jumps.
1341 Tue Feb 24 10:46:44 1998 Doug Evans <devans@canuck.cygnus.com>
1343 * arm-dis.c (print_insn_{big,little}_arm): info->symbol changed
1345 * mips-dis.c (print_insn_{big,little}_mips): Likewise.
1346 * tic30-dis.c (print_branch): Likewise.
1348 Tue Feb 24 11:06:18 1998 Nick Clifton <nickc@cygnus.com>
1350 * arm-dis.c (print_insn_big_arm, print_insn_little_arm): Remove
1351 saved_symbol code as it is no longer needed.
1353 Mon Feb 23 13:16:17 1998 Doug Evans <devans@seba.cygnus.com>
1355 * cgen-asm.c: Include symcat.h.
1356 * cgen-dis.c,cgen-opc.c: Ditto.
1357 * m32r-asm.c,m32r-dis.c,m32r-opc.h,m32r-opc.c: Regenerate.
1359 Mon Feb 23 10:34:58 1998 Jeffrey A Law (law@cygnus.com)
1361 * mips-dis.c (print_insn_arg): Do not prefix 'P' arguments with '$'.
1363 Thu Feb 19 16:51:13 1998 Doug Evans <devans@canuck.cygnus.com>
1365 * m32r-opc.[ch]: Regenerate.
1367 Tue Feb 17 17:14:50 1998 Doug Evans <devans@seba.cygnus.com>
1369 * cgen-asm.c (cgen_parse_{signed,unsigned}_integer): Delete min,max
1370 arguments. Don't perform validation here.
1371 * m32r-asm.c,m32r-dis.c,m32r-opc.c: Regenerate.
1373 Fri Feb 13 14:26:06 1998 Doug Evans <devans@canuck.cygnus.com>
1375 * m32r-opc.c: Regenerate.
1377 Fri Feb 13 14:53:02 1998 Ian Lance Taylor <ian@cygnus.com>
1379 * Makefile.am (AUTOMAKE_OPTIONS): Define.
1380 * configure, Makefile.in, aclocal.m4: Rebuild with automake 1.2e.
1382 Fri Feb 13 10:21:09 1998 Mark Alexander <marka@cygnus.com>
1384 * m10300-dis.c (print_insn_mn10300): Recognize break instruction.
1386 Fri Feb 13 13:12:14 1998 Ian Lance Taylor <ian@cygnus.com>
1388 * configure.in: Get the version number from BFD.
1389 * configure: Rebuild.
1391 From H.J. Lu <hjl@gnu.org>:
1392 * Makefile.am (libopcodes_la_LDFLAGS): Define.
1393 * Makefile.in: Rebuild.
1395 Fri Feb 13 09:50:32 1998 Nick Clifton <nickc@cygnus.com>
1397 * m32r-opc.c: Regenerate.
1398 * m32r-opc.h: Regenerate.
1400 Thu Feb 12 11:01:40 1998 Doug Evans <devans@canuck.cygnus.com>
1402 * m32r-opc.c: Regenerate.
1404 Thu Feb 12 03:41:00 1998 J"orn Rennecke <amylaar@cygnus.co.uk>
1406 Fix rac to accept only a0:
1407 * d10v-opc.c (d10v_predefined_registers, d10v_operands, d10v_opcodes):
1408 Split OPERAND_ACC into OPERAND_ACC0 and OPERAND_ACC1.
1409 Introduce OPERAND_GPR.
1410 * d10v-dis.c (print_operand): Likewise.
1412 Wed Feb 11 18:58:34 1998 Doug Evans <devans@seba.cygnus.com>
1414 * cgen-opc.c (cgen_set_cpu): Delete init of hw list `next' chain.
1415 (cgen_hw_lookup): Make result const.
1416 * m32r-opc.h, m32r-opc.c, m32r-asm.c, m32r-dis.c: Regenerate.
1418 Sat Feb 7 15:30:27 1998 Ian Lance Taylor <ian@cygnus.com>
1420 * configure, aclocal.m4: Rebuild with new libtool.
1422 Thu Feb 5 17:56:10 1998 Michael Meissner <meissner@cygnus.com>
1424 * d30v-opc.c (repeat{,i} instructions): Repeat/repeati
1425 instructions use a PC relative branch, not absolute.
1427 Wed Feb 4 19:17:37 1998 Ian Lance Taylor <ian@cygnus.com>
1429 * configure.in: Set libtool_enable_shared rather than
1430 libtool_shared. Remove diversion hack.
1431 * configure, Makefile.in, aclocal.m4: Rebuild with new libtool.
1433 Tue Feb 3 17:19:40 1998 Doug Evans <devans@seba.cygnus.com>
1435 * cgen-opc.c (cgen_set_cpu): Initialize hardware table.
1436 * m32r-opc.h, m32r-opc.c, m32r-asm.c, m32r-dis.c: Regenerate.
1438 Mon Feb 2 19:22:15 1998 Steve Haworth <steve@pm.cse.rmit.EDU.AU>
1440 * tic30-dis.c: New file.
1441 * disassemble.c (disassembler): Add bfd_arch_tic30 case.
1442 * configure.in: Handle bfd_tic30_arch.
1443 * Makefile.am: Rebuild dependencies.
1444 (CFILES): Add tic30-dis.c
1445 (ALL_MACHINES): Add tic30-dis.lo.
1446 * configure, Makefile.in: Rebuild.
1448 Thu Jan 29 13:02:56 1998 Doug Evans <devans@canuck.cygnus.com>
1450 * m32r-opc.h (HAVE_CPU_M32R): Define.
1452 Wed Jan 28 09:55:03 1998 Nick Clifton <nickc@cygnus.com>
1454 * v850-opc.c (insertion routines): If both alignment and size is
1455 wrong then report this.
1457 Tue Jan 27 21:52:59 1998 Jeffrey A Law (law@cygnus.com)
1459 * mips-dis.c (_print_insn_mips): Set target_processor as appropriate.
1460 Only recognize instructions for the current target_processor.
1462 Thu Jan 22 16:20:17 1998 Fred Fish <fnf@cygnus.com>
1464 * d10v-dis.c (PC_MASK): Correct value.
1465 (print_operand): If there's a reloc, don't calculate the
1466 address because they could be in different sections.
1468 Fri Jan 16 15:29:11 1998 Jim Blandy <jimb@zwingli.cygnus.com>
1470 * mips-opc.c (mips_builtin_opcodes): Move 4010's "addciu"
1471 instruction after the 4650's "mul" instruction; nobody's using the
1472 4010 these days. If object files someday indicate which processor
1473 variant they're intended for, we can do a better job at this.
1475 Mon Jan 12 14:43:54 1998 Doug Evans <devans@seba.cygnus.com>
1477 * cgen-asm.c (build_asm_hash_table): Traverse compiled in table using
1478 table provided entry size. Use CGEN_INSN_MNEMONIC.
1479 (cgen_parse_keyword): Rewrite.
1480 * cgen-dis.c (build_dis_hash_table): Traverse compiled in table using
1481 table provided entry size. Use CGEN_INSN_MASK_BITSIZE.
1482 * cgen-opc.c: Clean up pass over `struct foo' usage.
1483 (cgen_keyword_lookup_value): Handle "" entry.
1484 (cgen_keyword_add): Likewise.
1486 Mon Dec 22 12:37:06 1997 Ian Lance Taylor <ian@cygnus.com>
1488 * mips-opc.c: Add FP_D to s.d instruction flags.
1490 Wed Dec 17 11:38:29 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1492 * m68k-opc.c (halt, pulse): Enable them on the 68060.
1494 Tue Dec 16 15:22:53 1997 Fred Fish <fnf@cygnus.com>
1496 * tic80-opc.c (tic80_opcodes): Revert change that put the 32 bit
1497 PC relative offset forms before the 15 bit forms. An assembler command
1498 line option now chooses the default.
1500 Tue Dec 16 15:22:51 1997 Michael Meissner <meissner@cygnus.com>
1502 * d30v-opc.c (d30v_opcode_table): Set new flags bits
1503 FLAG_{2WORD,MUL{16,32},ADDSUBppp}, in appropriate instructions.
1505 1997-12-15 Brendan Kehoe <brendan@lisa.cygnus.com>
1507 * configure: Only build libopcodes shared if --enable-shared's value
1508 was `yes', or was set to `*opcodes*'.
1509 * aclocal.m4: Likewise.
1510 * NOTE: this really needs to be fixed in libtool/libtool.m4, the
1511 original source of this bit of code. It's not clear what the best fix
1514 Fri Dec 12 11:57:04 1997 Fred Fish <fnf@cygnus.com>
1516 * tic80-opc.c (OFF_SL_PC, OFF_SL_BR): Minor formatting change.
1517 (tic80_opcodes): Reorder table entries to put the 32 bit PC relative
1518 offset forms before the 15 bit forms, to default to the long forms.
1520 Fri Dec 12 01:32:30 1997 Richard Henderson <rth@cygnus.com>
1522 * alpha-opc.c (cvttq/*u*): Remove, as that suffix is invalid.
1524 Wed Dec 10 17:42:35 1997 Nick Clifton <nickc@cygnus.com>
1526 * arm-dis.c (print_insn_little_arm): Prevent examination of stored
1527 symbol if none is present.
1528 (print_insn_big_arm): Prevent examination of stored symbol if
1531 Thu Oct 23 21:13:37 1997 Fred Fish <fnf@cygnus.com>
1533 * d10v-opc.c (d10v_opcodes): Correct entry for RTE.
1535 Mon Dec 8 11:21:07 1997 Nick Clifton <nickc@cygnus.com>
1537 * disassemble.c: Remove disasm_symaddr() function.
1539 * arm-dis.c: Use info->symbol instead of info->flags to determine
1540 if disassmbly should be in Thumb or Arm mode.
1542 Tue Dec 2 09:54:27 1997 Nick Clifton <nickc@cygnus.com>
1544 * arm-dis.c: Add support for disassembling Thumb opcodes.
1545 (print_insn_thumb): New function.
1547 * disassemble.c (disasm_symaddr): New function.
1549 * arm-opc.h: Display nop pseudo ops alongside equivalent disassembly.
1550 (thumb_opcodes): Table of Thumb opcodes.
1552 Mon Dec 1 12:25:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1554 * m68k-opc.c (btst): Change Dd@s to Dd;b.
1556 * m68k-dis.c (print_insn_arg): Recognize 'm', 'n', 'o', 'p', 'q',
1557 and 'v' as operand types.
1559 Mon Dec 1 11:56:50 1997 Ian Lance Taylor <ian@cygnus.com>
1561 * m68k-opc.c: Add argument for lpstop. From Olivier Carmona
1562 <olivier.carmona@di.epfl.ch>.
1563 * m68k-dis.c (print_insn_m68k): Handle special case of lpstop,
1564 which has a two word opcode with a one word argument.
1566 Sun Nov 23 22:25:21 1997 Michael Meissner <meissner@cygnus.com>
1568 * d30v-opc.c (d30v_opcode_table, case cmpu): Immediate field is
1569 unsigned, not signed.
1570 (d30v_format_table): Add SHORT_CMPU cases for cmpu.
1572 Tue Nov 18 23:10:03 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1574 * d10v-dis.c (print_operand):
1575 Split OPERAND_FLAG into OPERAND_FFLAG and OPERAND_CFLAG.
1577 Tue Nov 18 18:45:14 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1579 * d10v-opc.c (OPERAND_FLAG): Split into:
1580 (OPERAND_FFLAG, OPERAND_CFLAG) .
1584 Thu Nov 13 11:05:33 1997 Gavin Koch <gavin@cygnus.com>
1586 * mips-opc.c: Move the INSN_MACRO ISA value to the membership
1587 field for all INSN_MACRO's.
1588 * mips16-opc.c: same
1590 Wed Nov 12 10:16:57 1997 Gavin Koch <gavin@cygnus.com>
1592 * mips-opc.c (sync,cache): These are 3900 insns.
1594 Tue Nov 11 23:53:41 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1596 sh-opc.h (sh_table): Remove ftst/nan.
1598 Tue Oct 28 17:59:32 1997 Ken Raeburn <raeburn@cygnus.com>
1600 * mips-opc.c (ffc, ffs): Fix mask.
1602 Tue Oct 28 16:34:54 1997 Michael Meissner <meissner@cygnus.com>
1604 * d30v-opc.c (pre_defined_registers): Add eit_vb, int_s, and int_m
1607 Mon Oct 27 22:34:03 1997 Ken Raeburn <raeburn@cygnus.com>
1609 * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
1610 (WR_HILO, RD_HILO, MOD_HILO): New macros.
1612 Mon Oct 27 22:34:03 1997 Ken Raeburn <raeburn@cygnus.com>
1614 * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
1615 (WR_HILO, RD_HILO, MOD_HILO): New macros.
1617 Thu Oct 23 14:57:58 1997 Nick Clifton <nickc@cygnus.com>
1619 * v850-dis.c (disassemble): Replace // with /* ... */
1621 Wed Oct 22 17:33:21 1997 Richard Henderson <rth@cygnus.com>
1623 * sparc-opc.c: Add wr & rd for v9a asr's.
1624 * sparc-dis.c (print_insn_sparc): Recognize '_' and '/' for v9a asr's.
1625 (v9a_asr_reg_names): New variable.
1626 Patch from David Miller <davem@vger.rutgers.edu>.
1628 Wed Oct 22 17:18:02 1997 Richard Henderson <rth@cygnus.com>
1630 * sparc-opc.c (v9notv9a): New insn type.
1631 (IMPDEP): Move to the end to not conflict with edge8 et al.
1632 Patch from David Miller <davem@vger.rutgers.edu>.
1634 Fri Oct 17 13:18:53 1997 Gavin Koch <gavin@cygnus.com>
1636 * mips-opc.c (bnezl,beqzl): Mark these as also tx39.
1638 Thu Oct 16 11:55:20 1997 Gavin Koch <gavin@cygnus.com>
1640 * mips-opc.c: Note that 'jalx' is (probably incorrectly) marked I1.
1642 Tue Oct 14 16:10:31 1997 Nick Clifton <nickc@cygnus.com>
1644 * v850-dis.c (disassemble): Use new symbol_at_address_func() field
1645 of disassemble_info structure to determine if an overlay address
1646 has a matching symbol in low memory.
1648 * dis-buf.c (generic_symbol_at_address): New (dummy) function for
1649 new symbol_at_address_func field in disassemble_info structure.
1651 Fri Oct 10 16:44:52 1997 Nick Clifton <nickc@cygnus.com>
1653 * v850-opc.c (extract_d22): Use signed arithmatic.
1655 Tue Oct 7 23:40:43 1997 Gavin Koch <gavin@cygnus.com>
1657 * mips-opc.c: Three op mult is not an ISA insn.
1659 Tue Oct 7 23:37:21 1997 Gavin Koch <gavin@cygnus.com>
1661 * mips-opc.c: Fix formatting.
1663 Fri Oct 3 17:26:54 1997 Ian Lance Taylor <ian@cygnus.com>
1665 * i386-dis.c (OP_E): Explicitly sign extend 8 bit values, rather
1666 than assuming that char is signed. Explicitly sign extend 16 bit
1667 values, rather than assuming that short is 16 bits.
1668 (OP_sI, OP_J, OP_DIR): Likewise.
1670 Thu Oct 2 13:36:45 1997 Nick Clifton <nickc@cygnus.com>
1672 * v850-dis.c (v850_sreg_names): Use symbolic names for higher
1675 Wed Oct 1 16:58:54 1997 Nick Clifton <nickc@cygnus.com>
1677 * v850-opc.c: Fix typo in comment.
1679 * v850-dis.c (disassemble): Add test of processor type when
1680 determining opcodes.
1682 Wed Oct 1 14:10:20 1997 Ian Lance Taylor <ian@cygnus.com>
1684 * configure.in: Use a diversion to set enable_shared before the
1685 arguments are parsed.
1686 * configure: Rebuild.
1688 Thu Sep 25 13:04:59 1997 Ian Lance Taylor <ian@cygnus.com>
1690 * m68k-opc.c (TBL1): Use ! rather than `.
1691 * m68k-dis.c (print_insn_arg): Remove ` operand specifier.
1693 Wed Sep 24 11:29:35 1997 Ian Lance Taylor <ian@cygnus.com>
1695 * m68k-opc.c: Correct bchg, bclr, bset, and btst on ColdFire.
1697 * m68k-opc.c: Accept tst{b,w,l} with immediate operands on cpu32.
1699 * m68k-opc.c: Correct movew of an immediate operand to %sr or %ccr
1702 * configure.in: Call AC_CHECK_TOOL before AM_PROG_LIBTOOL.
1703 * aclocal.m4: Rebuild with new libtool.
1704 * configure: Rebuild.
1706 Fri Sep 19 11:45:49 1997 Andrew Cagney <cagney@b1.cygnus.com>
1708 * v850-opc.c ("cmov"): Order reg param r1, r2 not r2, r2.
1710 Thu Sep 18 11:21:43 1997 Doug Evans <dje@canuck.cygnus.com>
1712 * sparc-opc.c (sparclet_cpreg_table): Add %ccsr2, %cccrr, %ccrstr.
1714 Tue Sep 16 15:18:20 1997 Nick Clifton <nickc@cygnus.com>
1716 * v850-opc.c (v850_opcodes): Further rearrangements.
1718 Tue Sep 16 16:12:11 1997 Ken Raeburn <raeburn@cygnus.com>
1720 * d30v-opc.c (rot2h, sra2h, srl2h insns): Revert last change.
1722 Tue Sep 16 09:48:50 1997 Nick Clifton <nickc@cygnus.com>
1724 * v850-opc.c (v850_opcodes): Fields reordered to allow assembler
1727 Tue Sep 16 10:01:00 1997 Gavin Koch <gavin@cygnus.com>
1729 * mips-opc.c: Added tx39 insns sdbbp, rfe, and deret.
1731 Mon Sep 15 18:31:52 1997 Nick Clifton <nickc@cygnus.com>
1733 * v850-opc.c: Initialise processors field of v850_opcode structure.
1735 Wed Aug 27 21:42:39 1997 Ken Raeburn <raeburn@cygnus.com>
1737 Merge changes from Martin Hunt:
1739 * d30v-opc.c: Change mvfacc to accept 6-bit unsigned values.
1741 * d30v-opc.c (pre_defined_registers): Add control registers from 0-63.
1742 (d30v_opcode_tabel): Add dbt, rtd, srah, and srlh instructions. Fix
1743 rot2h, sra2h, and srl2h to use new SHORT_A5S format.
1745 * d30v-dis.c (print_insn): Fix disassembly of SHORT_D2 opcodes.
1747 * d30v-dis.c (print_insn): First operand of d*i (delayed
1748 branch) instructions is relative.
1750 * d30v-opc.c (d30v_opcode_table): Change form for repeati.
1751 (d30v_operand_table): Add IMM6S3 type.
1752 (d30v_format_table): Change SHORT_D2. Add LONG_Db.
1754 * d30v-dis.c: Fix bug with ".s" and ".l" extensions
1755 and cmp instructions.
1757 * d30v-opc.c: Correct entries for repeat*, and sat*.
1758 Make IMM5 unsigned. Create IMM6U and IMM12S3U operand
1759 types. Correct several formats.
1761 * d30v-opc.c: (pre_defined_registers): Add dpsw and dpc.
1763 * d30v-opc.c (pre_defined_registers): Change control registers.
1765 * d30v-opc.c (d30v_format_table): Correct SHORT_C1 and
1766 SHORT_C2. Manual was incorrect.
1768 * d30v-dis.c (lookup_opcode): Return value now indicates
1769 if an opcode has a short and a long form. Used for deciding
1770 to append a ".s" or ".l".
1771 (print_insn): Append a ".s" to an instruction if it is
1772 the short form and ".l" if it is a long form. Do not append
1773 anything if the instruction has only one possible size.
1775 * d30v-opc.c: Change mulx2h to require an even register.
1776 New form: SHORT_A2; a SHORT_A form that needs an even
1777 register as the first operand.
1779 * d30v-dis.c (print_insn_d30v): Fix problem where the last
1780 instruction was not being disassembled if there were an odd
1781 number of instructions.
1783 * d30v-opc.c (SHORT_M2, LONG_M2): Two new forms.
1785 Fri Sep 12 11:43:54 1997 Nick Clifton <nickc@cygnus.com>
1787 * v850-dis.c (disassemble): Improved display of register lists.
1789 Thu Sep 11 17:35:10 1997 Doug Evans <dje@canuck.cygnus.com>
1791 * sparc-opc.c (sparc_opcodes): Fix assembler args to
1792 fzeros, fones, fsrc1, fsrc1s, fsrc2s, fnot1, fnot1s, fnot2s,
1793 fors, fnors, fands, fnands, fxors, fxnors, fornot1s, fornot2s,
1794 fandnot1s, fandnot2s.
1796 Tue Sep 9 10:03:49 1997 Doug Evans <dje@canuck.cygnus.com>
1798 * sparc-opc.c (sparc_opcodes): Fix op3 field for fcmpq/fcmpeq.
1800 Mon Sep 8 14:06:59 1997 Doug Evans <dje@canuck.cygnus.com>
1802 * cgen-asm.c (cgen_parse_address): New argument resultp.
1803 All callers updated.
1804 * m32r-asm.c (parse_h_hi16): Right shift numbers by 16.
1806 Tue Sep 2 18:39:08 1997 Jeffrey A Law (law@cygnus.com)
1808 * mn10200-dis.c (disassemble): PC relative instructions are
1809 relative to the next instruction, not the current instruction.
1811 Tue Sep 2 15:41:55 1997 Nick Clifton <nickc@cygnus.com>
1813 * v850-dis.c (disassemble): Only signed extend values that are not
1814 returned by extract functions.
1815 Remove use of V850_OPERAND_ADJUST_SHORT_MEMORY flag.
1817 Tue Sep 2 15:39:40 1997 Nick Clifton <nickc@cygnus.com>
1819 * v850-opc.c: Update comments. Remove use of
1820 V850_OPERAND_ADJUST_SHORT_MEMORY. Fix several operand patterns.
1822 Tue Aug 26 09:42:28 1997 Nick Clifton <nickc@cygnus.com>
1824 * v850-opc.c (MOVHI): Immediate parameter is unsigned.
1826 Mon Aug 25 15:58:07 1997 Christopher Provenzano <proven@cygnus.com>
1828 * configure: Rebuilt with latest devo autoconf for NT support.
1830 Fri Aug 22 10:35:15 1997 Nick Clifton <nickc@cygnus.com>
1832 * v850-dis.c (disassemble): Use curly brace syntax for register
1835 * v850-opc.c (v850_opcodes[]): Add NOT_R0 flag to decect cases
1836 where r0 is being used as a destination register.
1838 Thu Aug 21 11:09:09 1997 Nick Clifton <nickc@cygnus.com>
1840 * v850-opc.c (v850_opcodes[]): Move divh opcodes next to each other.
1842 Tue Aug 19 10:59:59 1997 Richard Henderson <rth@cygnus.com>
1844 * alpha-opc.c (alpha_opcodes): Fix hw_rei_stall mungage.
1846 Mon Aug 18 11:10:03 1997 Nick Clifton <nickc@cygnus.com>
1848 * v850-opc.c (v850_opcodes[]): Remove use of flag field.
1849 * v850-opc.c (v850_opcodes[]): Add support for reversed short load
1852 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
1854 * configure (cgen_files): Add support for v850e target.
1855 * configure.in (cgen_files): Add support for v850e target.
1857 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
1859 * configure (cgen_files): Add support for v850ea target.
1860 * configure.in (cgen_files): Add support for v850ea target.
1862 Fri Aug 15 05:17:48 1997 Doug Evans <dje@canuck.cygnus.com>
1864 * configure.in (bfd_arc_arch): Add.
1865 * configure: Rebuild.
1866 * Makefile.am (ALL_MACHINES): Add arc-dis.lo, arc-opc.lo.
1867 * Makefile.in: Rebuild.
1868 * arc-dis.c, arc-opc.c: New files.
1869 * disassemble.c (ARCH_all): Define ARCH_arc.
1870 (disassembler): Add ARC support.
1872 Wed Aug 13 18:52:11 1997 Nick Clifton <nickc@cygnus.com>
1874 * v850-dis.c (disassemble): Add support for v850EA instructions.
1876 * v850-opc.c (insert_i5div, extract_i5div): New Functions.
1877 (v850_opcodes): Add v850EA instructions.
1879 * v850-dis.c (disassemble): Add support for v850E instructions.
1881 * v850-opc.c (insert_d5_4, extract_d5_4, insert_d16_16,
1882 extract_d16_16, insert_i9, extract_i9, insert_u9, extract_u9,
1883 insert_spe, extract_spe): New Functions.
1884 (v850_opcodes): Add v850E instructions.
1886 * v850-opc.c: Reorganised and re-layed out to improve readability
1889 Tue Aug 5 23:09:31 1997 Ian Lance Taylor <ian@cygnus.com>
1891 * configure: Rebuild with autoconf 2.12.1.
1893 Mon Aug 4 12:02:16 1997 Ian Lance Taylor <ian@cygnus.com>
1895 * aclocal.m4, configure: Rebuild with new automake patches.
1897 Fri Aug 1 13:02:04 1997 Ian Lance Taylor <ian@cygnus.com>
1899 * configure.in: Set enable_shared before AM_PROG_LIBTOOL.
1900 * acinclude.m4: Just include acinclude.m4 from BFD.
1901 * aclocal.m4, configure: Rebuild.
1903 Thu Jul 31 21:44:42 1997 Ian Lance Taylor <ian@cygnus.com>
1905 * Makefile.am: New file, based on old Makefile.in.
1906 * acconfig.h: New file.
1907 * acinclude.m4: New file.
1908 * stamp-h.in: New file.
1909 * configure.in: Call AM_INIT_AUTOMAKE and AM_PROG_LIBTOOL.
1910 Removed shared library handling; now handled by libtool. Replace
1911 AC_CONFIG_HEADER with AM_CONFIG_HEADER. Call AM_MAINTAINER_MODE,
1912 AM_CYGWIN32, and AM_EXEEXT. Replace AC_PROG_INSTALL with
1913 AM_PROG_INSTALL. Change all .o files to .lo. Remove stamp-h
1914 handling in AC_OUTPUT.
1915 * dep-in.sed: Change .o to .lo.
1916 * Makefile.in: Now built with automake.
1917 * aclocal.m4: Now built with aclocal.
1918 * config.in, configure: Rebuild.
1920 Mon Jul 28 21:52:24 1997 Jeffrey A Law (law@cygnus.com)
1922 * mips-opc.c: Fix typo/thinko in "eret" instruction.
1924 Thu Jul 24 13:03:26 1997 Doug Evans <dje@canuck.cygnus.com>
1926 * sparc-opc.c (sparc_opcodes): Fix spelling on fpaddX, fpsubX insns.
1928 * sparc-dis.c (sorted_opcodes): New static local.
1929 (struct opcode_hash): `opcode' is pointer to const element.
1930 (build_hash): First arg is now table of sorted pointers.
1931 (print_insn_sparc): Sort opcodes by sorting table of pointers.
1932 (compare_opcodes): Update.
1934 Tue Jul 15 12:05:23 1997 Doug Evans <dje@canuck.cygnus.com>
1936 * cgen-opc.c: #include <ctype.h>.
1937 (hash_keyword_name): New arg `case_sensitive_p'. Callers updated.
1938 Handle case insensitive hashing.
1939 (hash_keyword_value): Change type of `value' to unsigned int.
1941 Thu Jul 10 12:56:10 1997 Jeffrey A Law (law@cygnus.com)
1943 * mips-opc.c (mips_builtin_opcodes): If an insn uses single
1944 precision FP, mark it as such. Likewise for double precision
1945 FP. Mark ISA1 insns. Consolidate duplicate opcodes where
1948 Wed Jun 25 15:25:57 1997 Felix Lee <flee@cirdan.cygnus.com>
1950 * ppc-opc.c (extract_nsi): make unsigned expression signed before
1952 (UNUSED): remove one level of parens, so MSVC doesn't choke on
1953 nesting depth when all the macros are expanded.
1955 Tue Jun 17 17:02:17 1997 Ian Lance Taylor <ian@cygnus.com>
1957 * sparc-opc.c: The fcmp v9a instructions take an integer register
1958 as a destination, not a floating point register. From Christian
1959 Kuehnke <Christian.Kuehnke@arbi.Informatik.Uni-Oldenburg.DE>.
1961 Mon Jun 16 14:13:18 1997 Ian Lance Taylor <ian@cygnus.com>
1963 * m68k-dis.c (print_insn_arg): Print case 7.2 using %pc@()
1964 syntax. From Roman Hodek
1965 <rnhodek@faui22c.informatik.uni-erlangen.de>.
1967 * i386-dis.c (twobyte_has_modrm): Fix pand.
1969 Mon Jun 16 14:08:38 1997 Michael Taylor <mbt@mit.edu>
1971 * i386-dis.c (dis386_twobyte): Fix pand and pandn.
1973 Tue Jun 10 11:26:47 1997 H.J. Lu <hjl@gnu.ai.mit.edu>
1975 * arm-dis.c: Add prototypes for arm_decode_shift and
1978 Mon Jun 2 11:39:04 1997 Gavin Koch <gavin@cygnus.com>
1980 * mips-opc.c: Add r3900 insns.
1982 Tue May 27 15:55:44 1997 Ian Lance Taylor <ian@cygnus.com>
1984 * sh-dis.c (print_insn_shx): Change relmask to bfd_vma. Don't
1985 print delay slot instructions on the same line. When using a PC
1986 relative load, add a comment with the value being loaded if it can
1989 Tue May 27 11:02:08 1997 Alan Modra <alan@spri.levels.unisa.edu.au>
1991 * i386-dis.c (dis386[], dis386_twobyte[]): change pushl/popl
1992 to pushS/popS for segment regs and byte constant so that
1993 pushw/popw printed when in 16 bit data mode.
1995 * i386-dis.c (dis386[]): change cwtl, cltd to cWtS, cStd to
1996 print cbtw, cwtd in 16 bit data mode.
1997 * i386-dis.c (putop): extra case W to support above.
1999 * i386-dis.c (print_insn_x86): print addr32 prefix when given
2000 address size prefix in 16 bit address mode.
2002 Fri May 23 16:47:23 1997 Ian Lance Taylor <ian@cygnus.com>
2004 * sh-dis.c: Reindent. Rename local variable fprintf to
2007 Thu May 22 14:06:02 1997 Doug Evans <dje@canuck.cygnus.com>
2009 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Undo patch of May 2.
2011 Tue May 20 11:26:27 1997 Gavin Koch <gavin@cygnus.com>
2013 * mips-opc.c (mips_builtin_opcodes): Moved INSN_ISA field into new
2015 * mips16-opc.c (mip16_opcodes): same.
2017 Mon May 12 15:10:53 1997 Jim Wilson <wilson@cygnus.com>
2019 * m68k-opc.c (moveb): Change $d to %d.
2021 Mon May 5 14:28:41 1997 Ian Lance Taylor <ian@cygnus.com>
2023 * i386-dis.c: (dis386_twobyte): Add MMX instructions.
2024 (twobyte_has_modrm): Likewise.
2026 (OP_MMX, OP_EM, OP_MS): New static functions.
2028 * i386-dis.c: Revert patch of April 4. The output now matches
2031 Fri May 2 12:48:37 1997 Doug Evans <dje@canuck.cygnus.com>
2033 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Use $uimm16 instead
2036 Thu May 1 15:34:15 1997 Doug Evans <dje@canuck.cygnus.com>
2038 * m32r-opc.h (CGEN_ARCH): Renamed from CGEN_CPU.
2040 Tue Apr 15 12:40:08 1997 Ian Lance Taylor <ian@cygnus.com>
2042 * Makefile.in (install): Depend upon installdirs.
2043 (installdirs): New target.
2045 Mon Apr 14 12:13:51 1997 Ian Lance Taylor <ian@cygnus.com>
2047 From Thomas Graichen <graichen@rzpd.de>:
2048 * configure.in: Use ${CONFIG_SHELL} when running $ac_config_sub.
2049 * configure: Rebuild.
2051 Sun Apr 13 17:50:41 1997 Doug Evans <dje@canuck.cygnus.com>
2053 * cgen-*.c, m32r-*.c: #include sysdep.h instead of config.h.
2054 Delete string{,s}.h support.
2056 Thu Apr 10 14:44:56 1997 Doug Evans <dje@canuck.cygnus.com>
2058 * cgen-asm.c (cgen_parse_operand_fn): New global.
2059 (cgen_parse_{{,un}signed_integer,address}): Update call to
2060 cgen_parse_operand_fn.
2061 (cgen_init_parse_operand): New function.
2062 * m32r-asm.c (parse_insn_normal): cgen_init_parse_operand renamed
2063 from cgen_asm_init_parse.
2064 (m32r_cgen_assemble_insn): New operand `errmsg'.
2065 Delete call to as_bad, return error message to caller.
2066 (m32r_cgen_asm_hash_keywords): #if 0 out.
2068 Wed Apr 9 12:05:25 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2070 * m68k-dis.c (print_insn_arg) [case 'd']: Print as address register,
2072 [case 'J']: Fix typo in register name.
2074 Mon Apr 7 16:48:22 1997 Ian Lance Taylor <ian@cygnus.com>
2076 * configure.in: Substitute SHLIB_LIBS.
2077 * configure: Rebuild.
2078 * Makefile.in (SHLIB_LIBS): New variable.
2079 ($(SHLIB)): Use $(SHLIB_LIBS).
2081 Mon Apr 7 11:45:44 1997 Doug Evans <dje@canuck.cygnus.com>
2083 * cgen-dis.c (build_dis_hash_table): Fix xmalloc size computation.
2085 * cgen-opc.c (hash_keyword_name): Improve algorithm.
2087 * disassemble.c (disassembler): Handle m32r.
2089 Fri Apr 4 12:29:38 1997 Doug Evans <dje@canuck.cygnus.com>
2091 * m32r-asm.c, m32r-dis.c, m32r-opc.c, m32r-opc.h: New files.
2092 * cgen-asm.c, cgen-dis.c, cgen-opc.c: New files.
2093 * Makefile.in (CFILES): Add them.
2094 (ALL_MACHINES): Add them.
2095 (dependencies): Regenerate.
2096 * configure.in (cgen_files): New variable.
2097 (bfd_m32r_arch): Add entry.
2098 * configure: Regenerate.
2100 Fri Apr 4 14:04:16 1997 Ian Lance Taylor <ian@cygnus.com>
2102 * configure.in: Correct file names for bfd_mn10[23]00_arch.
2103 * configure: Rebuild.
2105 * Makefile.in: Rebuild dependencies.
2107 * d10v-dis.c: Include "ansidecl.h" before "opcode/d10v.h".
2109 * i386-dis.c (float_reg): Swap fsubrp and fsubp. Swap fdivrp and
2112 Thu Apr 3 13:22:45 1997 Ian Lance Taylor <ian@cygnus.com>
2114 * Branched binutils 2.8.
2116 Wed Apr 2 12:23:53 1997 Ian Lance Taylor <ian@cygnus.com>
2118 * m10200-dis.c: Rename from mn10200-dis.c.
2119 * m10200-opc.c: Rename from mn10200-opc.c.
2120 * m10300-dis.c: Rename from mn10300-dis.c
2121 * m10300-opc.c: Rename from mn10300-opc.c.
2122 * Makefile.in: Update accordingly.
2124 * mips16-opc.c: Add mul and dmul macros.
2126 Tue Apr 1 16:27:45 1997 Klaus Kaempf <kkaempf@progis.de>
2128 * makefile.vms: Update CFLAGS, add clean target.
2130 Fri Mar 28 12:10:09 1997 Ian Lance Taylor <ian@cygnus.com>
2132 * mips-opc.c: Add "wait". From Ralf Baechle
2133 <ralf@gnu.ai.mit.edu>.
2135 * configure.in: Add stdlib.h to AC_CHECK_HEADERS list.
2136 * configure, config.in: Rebuild.
2137 * sysdep.h: Include <stdlib.h> if it exists.
2138 * sparc-dis.c: Include <stdio.h> and "sysdep.h". Don't include
2140 * Makefile.in: Rebuild dependencies.
2142 Thu Mar 27 14:24:43 1997 Ian Lance Taylor <ian@cygnus.com>
2144 * ppc-opc.c: Add PPC 403 instructions and extended opcodes. From
2145 Andrew Bray <andy@madhouse.demon.co.uk>.
2147 * mips-opc.c: Add cast when setting mips_opcodes.
2149 Tue Mar 25 23:04:00 1997 Stu Grossman (grossman@critters.cygnus.com)
2151 * v850-dis.c (disassemble): Fix sign extension problem.
2152 * v850-opc.c (extract_d*): Fix sign extension problems to make
2153 disassembly calculate branch offsets correctly.
2155 Mon Mar 24 13:22:13 1997 Ian Lance Taylor <ian@cygnus.com>
2157 * sh-opc.h: Add bf/s and bt/s as synonyms for bf.s and bt.s.
2159 * mips-opc.c: Add dctr and dctw.
2161 Sun Mar 23 18:08:10 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2163 * d30v-dis.c (print_insn): Change the way signed constants
2166 Fri Mar 21 14:37:52 1997 Ian Lance Taylor <ian@cygnus.com>
2168 * Makefile.in (BFD_H): New variable.
2169 (HFILES): New variable.
2170 (CFILES): Add all C files.
2171 (.dep, .dep1, dep.sed, dep, dep-in): New targets.
2172 Delete old dependencies, and build new ones.
2173 * dep-in.sed: New file.
2175 Thu Mar 20 19:03:30 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
2177 * m68k-opc.c (m68k_opcode_aliases): Added blo and blo{s,b,w,l}.
2179 Tue Mar 18 14:17:03 1997 Jeffrey A Law (law@cygnus.com)
2181 * mn10200-opc.c: Change "trap" to "syscall".
2182 * mn10300-opc.c: Add new "syscall" instruction.
2184 Mon Mar 17 08:48:03 1997 J.T. Conklin <jtc@beauty.cygnus.com>
2186 * m68k-opc.c (m68k_opcodes): Provide correct entries for mulsl and
2187 mulul insns on the coldfire.
2189 Sat Mar 15 17:13:05 1997 Ian Lance Taylor <ian@cygnus.com>
2191 * arm-dis.c (print_insn_arm): Don't print instruction bytes.
2192 (print_insn_big_arm): Set bytes_per_chunk and display_endian.
2193 (print_insn_little_arm): Likewise.
2195 Fri Mar 14 15:08:59 1997 Ian Lance Taylor <ian@cygnus.com>
2197 Based on patches from H.J. Lu <hjl@lucon.org>:
2198 * i386-dis.c (fetch_data): Add prototype.
2199 * m68k-dis.c (fetch_data): Add prototype.
2200 (dummy_print_address): Add prototype. Make static.
2201 * ppc-opc.c (valid_bo): Add prototype.
2202 * sparc-dis.c (build_hash_table): Add prototype.
2203 (is_delayed_branch, compute_arch_mask): Add prototypes.
2204 (print_insn_sparc): Make several local variables const.
2205 (compare_opcodes): Change arguments to const PTR. Add prototype.
2206 * sparc-opc.c (arg): Change name field to be const.
2207 (lookup_name, lookup_value): Add prototypes. Change table and
2208 name parameters to be const.
2209 (sparc_encode_asi): Change name parameter to be const.
2210 (sparc_encode_membar, sparc_encode_prefetch): Likewise.
2211 (sparc_encode_sparclet_cpreg): Likewise.
2212 (sparc_decode_asi): Change return type to be const.
2213 (sparc_decode_membar, sparc_decode_prefetch): Likewise.
2214 (sparc_decode_sparclet_cpreg): Likewise.
2216 Fri Mar 7 10:51:49 1997 Ian Lance Taylor <ian@cygnus.com>
2218 * Makefile.in ($(SHLINK)): Just use ln -s, not ln -sf, since
2219 Solaris doesn't like the combined options, and the -f is
2221 (stamp-tshlink, install): Likewise.
2223 Thu Mar 6 16:51:11 1997 Jeffrey A Law (law@cygnus.com)
2225 * mn10300-opc.c (IMM16_PCREL, SD8N_PCREL, D16_SHIFT): Mark these
2228 Tue Mar 4 06:10:36 1997 J.T. Conklin <jtc@cygnus.com>
2230 * m68k-opc.c (m68k_opcodes): Fix last change for the mc68010.
2232 Mon Mar 3 07:45:20 1997 J.T. Conklin <jtc@cygnus.com>
2234 * m68k-opc.c (m68k_opcodes): Added entries for the tst insns on
2237 Thu Feb 27 14:04:32 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
2239 * m68k-opc.c (m68k_opcodes): Added swbegl pseudo-instruction.
2241 Thu Feb 27 11:36:41 1997 Michael Meissner <meissner@cygnus.com>
2243 * tic80-dis.c (print_insn_tic80): Set info->bytes_per_line to 8.
2245 Wed Feb 26 15:34:48 1997 Michael Meissner <meissner@cygnus.com>
2247 * tic80-opc.c (tic80_predefined_symbols): Define r25 properly.
2249 Wed Feb 26 13:38:30 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2251 * m68k-dis.c (NEXTSINGLE, NEXTDOUBLE, NEXTEXTEND): Use
2252 floatformat_to_double to make portable.
2253 (print_insn_arg): Use NEXTEXTEND macro when extracting extended
2256 Mon Feb 24 19:26:12 1997 Dawn Perchik <dawn@cygnus.com>
2258 * mips-opc.c: Initialize mips_opcodes to mips_builtin_opcodes,
2259 and bfd_mips_num_opcodes to bfd_mips_num_builtin_opcodes.
2261 Mon Feb 24 15:19:01 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2263 * d10v-dis.c, d10v-opc.c: Change pre_defined_registers to
2264 d10v_predefined_registers and reg_name_cnt to d10v_reg_name_cnt.
2266 Mon Feb 24 14:33:26 1997 Fred Fish <fnf@cygnus.com>
2268 * tic80-opc.c (LSI_SCALED): Renamed from this ...
2269 (OFF_SL_BR_SCALED): ... to this, and added the flag
2270 TIC80_OPERAND_BASEREL to the flags word.
2271 (tic80_opcodes): Replace all occurances of LSI_SCALED with
2274 Sat Feb 22 21:25:00 1997 Dawn Perchik <dawn@cygnus.com>
2276 * mips-opc.c: Add macros for cop0, cop1 cop2 and cop3.
2277 Change mips_opcodes from const array to a pointer,
2278 and change bfd_mips_num_opcodes from const int to int,
2279 so that we can increase the size of the mips opcodes table
2282 Sat Feb 22 21:03:47 1997 Fred Fish <fnf@cygnus.com>
2284 * tic80-opc.c (tic80_predefined_symbols): Revert change to
2285 store BITNUM values in the table in one's complement form
2286 to match behavior when assembler is given a raw numeric
2287 value for a BITNUM operand.
2288 * tic80-dis.c (print_operand_bitnum): Ditto.
2290 Fri Feb 21 16:31:18 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2292 * d30v-opc.c: Removed references to FLAG_X.
2294 Wed Feb 19 14:51:20 1997 Ian Lance Taylor <ian@cygnus.com>
2296 * Makefile.in: Add dependencies on ../bfd/bfd.h as required.
2298 Tue Feb 18 17:43:43 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2300 * Makefile.in: Added d30v object files.
2301 * configure: (bfd_d30v_arch) Rebuilt.
2302 * configure.in: (bfd_d30v_arch) Added new case.
2303 * d30v-dis.c: New file.
2304 * d30v-opc.c: New file.
2305 * disassemble.c (disassembler) Add entry for d30v.
2307 Tue Feb 18 16:32:08 1997 Fred Fish <fnf@cygnus.com>
2309 * tic80-opc.c (tic80_predefined_symbols): Add symbolic
2310 representations for the floating point BITNUM values.
2312 Fri Feb 14 12:14:05 1997 Fred Fish <fnf@cygnus.com>
2314 * tic80-opc.c (tic80_predefined_symbols): Store BITNUM values
2315 in the table in one's complement form, as they appear in the
2317 (tic80_symbol_to_value): Use macros to access predefined
2319 (tic80_value_to_symbol): Ditto.
2320 (tic80_next_predefined_symbol): New function.
2321 * tic80-dis.c (print_operand_bitnum): Remove code that did
2322 one's complement for BITNUM values.
2324 Thu Feb 13 21:56:51 1997 Klaus Kaempf <kkaempf@progis.de>
2326 * makefile.vms: Remove 8 bit characters. Update to latest
2329 Thu Feb 13 20:41:22 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
2331 * m68k-opc.c (m68k_opcodes): Add swbeg pseudo-instruction.
2333 Thu Feb 13 16:30:02 1997 Jeffrey A Law (law@cygnus.com)
2335 * mn10200-opc.c (IMM16_PCREL): This is a signed operand.
2336 (IMM24_PCREL): Likewise.
2338 Thu Feb 13 13:28:43 1997 Ian Lance Taylor <ian@cygnus.com>
2340 * mips-dis.c (print_mips16_insn_arg): Use memaddr - 2 as the base
2341 address for an extended PC relative instruction that is not a
2344 Wed Feb 12 12:27:40 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2346 * m68k-dis.c (print_insn_m68k): Set bytes_per_chunk and
2349 Tue Feb 11 16:36:31 1997 Fred Fish <fnf@cygnus.com>
2351 * tic80-opc.c (tic80_operands): Fix typo '+' -> '|'.
2352 (tic80_opcodes): Sort entries so that long immediate forms
2353 come after short immediate forms, making it easier for
2354 assembler to select the right one for a given operand.
2356 Tue Feb 11 15:26:47 1997 Ian Lance Taylor <ian@cygnus.com>
2358 * mips-dis.c (_print_insn_mips): Set bytes_per_chunk and
2360 (print_insn_mips16): Likewise.
2362 Mon Feb 10 10:12:41 1997 Fred Fish <fnf@cygnus.com>
2364 * tic80-opc.c (tic80_symbol_to_value): Changed to accept
2365 a symbol class that restricts translation to just that
2366 class (general register, condition code, etc).
2368 Thu Feb 6 17:34:09 1997 Fred Fish <fnf@cygnus.com>
2370 * tic80-opc.c (tic80_operands): Add REG_0_E, REG_22_E,
2371 and REG_DEST_E for register operands that have to be
2372 an even numbered register. Add REG_FPA for operands that
2373 are one of the floating point accumulator registers.
2374 Add TIC80_OPERAND_MASK to flags for ENDMASK operand.
2375 (tic80_opcodes): Change entries that need even numbered
2376 register operands to use the new operand table entries.
2377 Add "or" entries that are identical to "or.tt" entries.
2379 Wed Feb 5 11:12:44 1997 Ian Lance Taylor <ian@cygnus.com>
2381 * mips16-opc.c: Add new cases of exit instruction for
2383 * mips-dis.c (print_mips16_insn_arg): Display floating point
2384 registers in operands of exit instruction. Print `$' before
2385 register names in operands of entry and exit instructions.
2387 Thu Jan 30 14:09:03 1997 Fred Fish <fnf@cygnus.com>
2389 * tic80-opc.c (tic80_predefined_symbols): Table of name/value
2390 pairs for all predefined symbols recognized by the assembler.
2391 Also used by the disassembling routines.
2392 (tic80_symbol_to_value): New function.
2393 (tic80_value_to_symbol): New function.
2394 * tic80-dis.c (print_operand_control_register,
2395 print_operand_condition_code, print_operand_bitnum):
2396 Remove private tables and use tic80_value_to_symbol function.
2398 Thu Jan 30 11:30:45 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2400 * d10v-dis.c (print_operand): Change address printing
2401 to correctly handle PC wrapping. Fixes PR11490.
2403 Wed Jan 29 09:39:17 1997 Jeffrey A Law (law@cygnus.com)
2405 * mn10200-opc.c (mn10200_operands): Make 8 and 16 bit pc-relative
2408 Tue Jan 28 15:57:34 1997 Ian Lance Taylor <ian@cygnus.com>
2410 * mips-dis.c (print_insn_mips16): Set insn_info information.
2411 (print_mips16_insn_arg): Likewise.
2413 * mips-dis.c (print_insn_mips16): Better handling of an extend
2414 opcode followed by an instruction which can not be extended.
2416 Fri Jan 24 12:08:21 1997 J.T. Conklin <jtc@cygnus.com>
2418 * m68k-opc.c (m68k_opcodes): Changed operand specifier for the
2419 coldfire moveb instruction to not allow an address register as
2420 destination. Although the documentation does not indicate that
2421 this is invalid, experiments uncovered unexpected behavior.
2422 Added a comment explaining the situation. Thanks to Andreas
2423 Schwab for pointing this out to me.
2425 Wed Jan 22 20:13:51 1997 Fred Fish <fnf@cygnus.com>
2427 * tic80-opc.c (tic80_opcodes): Expand comment to note that the
2428 entries are presorted so that entries with the same mnemonic are
2429 adjacent to each other in the table. Sort the entries for each
2430 instruction so that this is true.
2432 Mon Jan 20 12:48:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2434 * m68k-dis.c: Include <libiberty.h>.
2435 (print_insn_m68k): Sort the opcode table on the most significant
2436 nibble of the opcode.
2438 Sat Jan 18 15:15:05 1997 Fred Fish <fnf@cygnus.com>
2440 * tic80-dis.c (tic80_opcodes): Add "wrcr", "vmpy", "vrnd",
2441 "vsub", "vst", "xnor", and "xor" instructions.
2442 (V_a1): Renamed from V_a, msb of accumulator reg number.
2443 (V_a0): Add macro, lsb of accumulator reg number.
2445 Fri Jan 17 18:24:31 1997 Fred Fish <fnf@cygnus.com>
2447 * tic80-dis.c (print_insn_tic80): Broke excessively long
2448 function up into several smaller ones and arranged for
2449 the instruction printing function to be callable recursively
2450 to print vector instructions that have both a load and a
2451 math instruction packed into a single opcode.
2452 * tic80-opc.c (tic80_opcodes): Expand comment for vld opcode
2453 to explain why it comes after the other vector opcodes.
2455 Fri Jan 17 16:19:15 1997 J.T. Conklin <jtc@beauty.cygnus.com>
2457 * m68k-opc.c (m68k_opcodes): add b, w, or l specifier to coldfire
2458 move insns to handle immediate operands.
2460 Thu Jan 17 16:19:00 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2462 * m68k-opc.c (m68k_opcodes): Delete duplicate entry for "cmpil".
2463 fix operand mask in the "moveml" entries for the coldfire.
2465 Thu Jan 16 20:54:40 1997 Fred Fish <fnf@cygnus.com>
2467 * tic80-opc.c (V_a, V_m, V_S, V_Z, V_p, OP_V, MASK_V):
2468 New macros for building vector instruction opcodes.
2469 (tic80_opcodes): Remove all uses of FMT_SI, FMT_REG, and
2470 FMT_LI, which were unused. The field is now a flags field.
2471 Remove some opcodes that are possible, but illegal, such
2472 as long immediate instructions with doubles for immediate
2473 values. Add "vadd" and "vld" instructions.
2475 Wed Jan 15 18:59:51 1997 Fred Fish <fnf@cygnus.com>
2477 * tic80-opc.c (tic80_operands): Reorder some table entries to make
2478 the order more logical. Move the shift alias instructions ("rotl",
2479 "shl", "ins", "rotr", "extu", "exts", "srl", and "sra" to be
2480 interspersed with the regular sr.x and sl.x instructions. Add
2481 and test new instruction opcodes for "sl", "sli", "sr", "sri", "st",
2482 "sub", "subu", "swcr", and "trap".
2484 Tue Jan 14 19:42:50 1997 Fred Fish <fnf@cygnus.com>
2486 * tic80-opc.c (OFF_SS_PC): Renamed from OFF_SS.
2487 (OFF_SL_PC): Renamed from OFF_SL.
2488 (OFF_SS_BR): New operand type for base relative operand.
2489 (OFF_SL_BR): New operand type for base relative operand.
2490 (REG_BASE): New operand type for base register operand.
2491 (tic80_opcodes): Add and test "fmpy", "frndm", "frndn", "frndp",
2492 "frndz", "fsqrt", "fsub", "illop0", "illopF", "ins", "jsr",
2493 "ld", "ld.u", "lmo", "or", "rdcr", "rmo", "rotl", and "rotr"
2495 * tic80-dis.c (print_insn_tic80): Print opcode name with fixed width
2496 10 char field, padded with spaces on rhs, rather than a string
2497 followed by a tab. Use renamed TIC80_OPERAND_PCREL flag bit rather
2498 than old TIC80_OPERAND_RELATIVE. Add support for new
2499 TIC80_OPERAND_BASEREL flag bit.
2501 Mon Jan 13 15:58:56 1997 Fred Fish <fnf@cygnus.com>
2503 * tic80-dis.c (print_insn_tic80): Print floating point operands
2505 * tic80-opc.c (SPFI): Add single precision floating point
2506 immediate operand type.
2507 (ROTATE): Add rotate operand type for shifts.
2508 (ENDMASK): Add for shifts.
2509 (n): Macro for the 'n' bit.
2510 (i): Macro for the 'i' bit.
2511 (PD): Macro for the 'PD' field.
2512 (P2): Macro for the 'P2' field.
2513 (P1): Macro for the 'P1' field.
2514 (tic80_opcodes): Add entries for "exts", "extu", "fadd",
2517 Mon Jan 6 15:06:55 1997 Jeffrey A Law (law@cygnus.com)
2519 * mn10200-dis.c (disassemble): Mask off unwanted bits after
2520 adding in current address for pc-relative operands.
2522 Mon Jan 6 10:56:25 1997 Fred Fish <fnf@cygnus.com>
2524 * tic80-dis.c (R_SCALED): Add macro to test for ":s" modifier bit.
2525 (print_insn_tic80): If R_SCALED then print ":s" modifier for operand.
2526 * tic80-opc.c (REG0, REG22, REG27, SSOFF, LSOFF): Names
2527 changed to REG_0, REG_22, REG_DEST, OFF_SS, OFF_SL respectively.
2528 (SICR, LICR, REGM_SI, REGM_LI): Names changed to CR_SI, CR_LI,
2529 REG_BASE_M_SI, REG_BASE_M_LI respectively.
2530 (REG_SCALED, LSI_SCALED): New operand types.
2531 (E): New macro for 'E' bit at bit 27.
2532 (tic80_opcodes): Add and test dld, dld.u, dst, estop, and etrap
2533 opcodes, including the various size flavors (b,h,w,d) for
2534 the direct load and store instructions.
2536 Sun Jan 5 12:18:14 1997 Fred Fish <fnf@cygnus.com>
2538 * tic80-dis.c (M_SI, M_LI): Add macros to test for ":m" modifier bit
2540 * tic80-dis.c (print_insn_tic80): Change comma and paren handling.
2541 Use M_SI and M_LI macros to check for ":m" modifier for GPR operands.
2542 * tic80-opc.c (tic80_operands): Add REGM_SI and REGM_LI operands.
2543 (F, M_REG, M_LI, M_SI, SZ_REG, SZ_LI, SZ_SI, D, S): New bit-twiddlers.
2544 (MASK_LI_M, MASK_SI_M, MASK_REG_M): Remove and replace in opcode
2545 masks with "MASK_* & ~M_*" to get the M bit reset.
2546 (tic80_opcodes): Add bsr, bsr.a, cmnd, cmp, dcachec, and dcachef.
2548 Sat Jan 4 19:05:05 1997 Fred Fish <fnf@cygnus.com>
2550 * tic80-dis.c (print_insn_tic80): Print TIC80_OPERAND_RELATIVE
2551 correctly. Add support for printing TIC80_OPERAND_BITNUM and
2552 TIC80_OPERAND_CC, and TIC80_OPERAND_CR operands in symbolic
2554 * tic80-opc.c (tic80_operands): Add SSOFF, LSOFF, BITNUM,
2555 CC, SICR, and LICR table entries.
2556 (tic80_opcodes): Add and test "nop", "br", "bbo", "bbz",
2557 "bcnd", and "brcr" opcodes.
2559 Fri Jan 3 18:32:11 1997 Fred Fish <fnf@cygnus.com>
2561 * ppc-opc.c (powerpc_operands): Make comment match the
2562 actual fields (no shift field).
2563 * sparc-opc.c (sparc_opcodes): Document why this cannot be "const".
2564 * tic80-dis.c (print_insn_tic80): Replace abort stub with a
2565 partial implementation, work in progress.
2566 * tic80-opc.c (tic80_operands): Begin construction operands table.
2567 (tic80_opcodes): Continue populating opcodes table and start
2568 filling in the operand indices.
2569 (tic80_num_opcodes): Add this.
2571 Fri Jan 3 12:13:52 1997 Ian Lance Taylor <ian@cygnus.com>
2573 * m68k-opc.c: Add #B case for moveq.
2575 Thu Jan 2 12:14:29 1997 Jeffrey A Law (law@cygnus.com)
2577 * mn10300-dis.c (disassemble): Make sure all variables are initialized
2578 before they are used.
2580 Tue Dec 31 12:20:38 1996 Jeffrey A Law (law@cygnus.com)
2582 * v850-opc.c (v850_opcodes): Put curly-braces around operands
2583 for "breakpoint" instruction.
2585 Tue Dec 31 15:38:13 1996 Ian Lance Taylor <ian@cygnus.com>
2587 * Makefile.in (ALL_CFLAGS): Add -D_GNU_SOURCE.
2588 (dep): Use ALL_CFLAGS rather than CFLAGS.
2590 Tue Dec 31 15:09:16 1996 Michael Meissner <meissner@tiktok.cygnus.com>
2592 * v850-opc.c (D8_{6,7}): Set V850_OPERAND_ADJUST_SHORT_MEMORY
2595 Mon Dec 30 17:02:11 1996 Fred Fish <fnf@cygnus.com>
2597 * Makefile.in (m68k-opc.o, alpha-opc.o): Remove dis-asm.h dependency.
2598 (tic80-dis.o, tic80-opc.o): Add rules per comment in Makefile.in.
2600 Mon Dec 30 11:38:01 1996 Ian Lance Taylor <ian@cygnus.com>
2602 * mips16-opc.c: Add "abs".
2604 Sun Dec 29 10:58:22 1996 Fred Fish <fnf@cygnus.com>
2606 * Makefile.in (ALL_MACHINES): Add tic80-dis.o and tic80-opc.o.
2607 * disassemble.c (ARCH_tic80): Define if ARCH_all is defined.
2608 (disassembler): Add bfd_arch_tic80 support to set disassemble
2609 to print_insn_tic80.
2610 * tic80-dis.c (print_insn_tic80): Add stub.
2612 Fri Dec 27 22:30:57 1996 Fred Fish <fnf@cygnus.com>
2614 * configure.in (arch in $selarchs): Add bfd_tic80_arch entry.
2615 * configure: Regenerate with autoconf.
2616 * tic80-dis.c: Add file.
2617 * tic80-opc.c: Add file.
2619 Fri Dec 20 14:30:19 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2621 * d10v-opc.c (pre_defined_registers): Add cr[0-15], dpc, dpsw, link.
2623 Mon Dec 16 13:00:15 1996 Jeffrey A Law (law@cygnus.com)
2625 * mn10200-opc.c (mn10200_operands): Add SIMM16N.
2626 (mn10200_opcodes): Use it for some logicals and btst insns.
2627 Add "break" and "trap" instructions.
2629 * mn10300-opc.c (mn10300_opcodes): Add "break" instruction.
2631 * mn10200-opc.c: Add pseudo-ops for "mov (an),am" and "mov an,(am)".
2633 Sat Dec 14 22:36:20 1996 Ian Lance Taylor <ian@cygnus.com>
2635 * mips-dis.c (print_mips16_insn_arg): The base address of a PC
2636 relative load or add now depends upon whether the instruction is
2639 Wed Dec 11 09:23:46 1996 Jeffrey A Law (law@cygnus.com)
2641 * mn10200-dis.c: Finish writing disassembler.
2642 * mn10200-opc.c (mn10200_opcodes): Fix mask for "mov imm8,dn".
2643 Fix mask for "jmp (an)".
2645 * mn10300-dis.c (disassemble, print_insn_mn10300): Corrently
2646 handle endianness issues for mn10300.
2648 * mn10200-opc.c (mn10200_opcodes): Fix operands for "movb dm,(an)".
2650 Tue Dec 10 12:08:05 1996 Jeffrey A Law (law@cygnus.com)
2652 * mn10200-opc.c (mn10200_opcodes): "mov imm8,d0" is a format 2
2653 instruction. Fix opcode field for "movb (imm24),dn".
2655 * mn10200-opc.c (mn10200_operands): Fix insertion position
2658 Mon Dec 9 16:42:43 1996 Jeffrey A Law (law@cygnus.com)
2660 * mn10200-opc.c: Create mn10200 opcode table.
2661 * mn10200-dis.c: Flesh out mn10200 disassembler. Not ready,
2662 but moving along nicely.
2664 Sun Dec 8 04:28:31 1996 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2666 * Makefile.in (ALL_MACHINES): Add mips16-opc.o.
2668 Fri Dec 6 16:47:40 1996 J.T. Conklin <jtc@rhino.cygnus.com>
2670 * m68k-opc.c (m68k_opcodes): Revert change to use < and >
2671 specifiers for fmovem* instructions.
2673 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
2675 * mn10300-dis.c (disassemble): Remove '$' register prefixing.
2677 Fri Dec 6 17:34:39 1996 Ian Lance Taylor <ian@cygnus.com>
2679 * mips16-opc.c: Change opcode for entry/exit to avoid conflicting
2682 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
2684 * mn10300-opc.c: Add some comments explaining the various
2687 * mn10300-dis.c (disassemble): Fix minor gcc -Wall warnings.
2689 Thu Dec 5 12:09:48 1996 J.T. Conklin <jtc@rtl.cygnus.com>
2691 * m68k-dis.c (print_insn_arg): Handle new < and > operand
2694 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
2695 operand specifiers in fmovm* instructions.
2697 Wed Dec 4 14:52:18 1996 Ian Lance Taylor <ian@cygnus.com>
2699 * ppc-opc.c (insert_li): Give an error if the offset has the two
2700 least significant bits set.
2702 Wed Nov 27 13:09:01 1996 Ian Lance Taylor <ian@cygnus.com>
2704 * mips-dis.c (print_insn_mips16): Separate the instruction from
2705 the arguments with a tab, not a space.
2707 Tue Nov 26 13:24:17 1996 Jeffrey A Law (law@cygnus.com)
2709 * mn10300-dis.c (disasemble): Finish conversion to '$' as
2712 * mn10300-opc.c (mn10300_opcodes): Fix mask field for
2715 Tue Nov 26 10:53:21 1996 Ian Lance Taylor <ian@cygnus.com>
2717 * configure: Rebuild with autoconf 2.12.
2719 Add support for mips16 (16 bit MIPS implementation):
2720 * mips16-opc.c: New file.
2721 * mips-dis.c: Include "elf-bfd.h" and "elf/mips.h".
2722 (mips16_reg_names): New static array.
2723 (print_insn_big_mips): Use print_insn_mips16 in 16 bit mode or
2724 after seeing a 16 bit symbol.
2725 (print_insn_little_mips): Likewise.
2726 (print_insn_mips16): New static function.
2727 (print_mips16_insn_arg): New static function.
2728 * mips-opc.c: Add jalx instruction.
2729 * Makefile.in (mips16-opc.o): New target.
2730 * configure.in: Use mips16-opc.o for bfd_mips_arch.
2731 * configure: Rebuild.
2733 Mon Nov 25 16:15:17 1996 J.T. Conklin <jtc@cygnus.com>
2735 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
2736 operand specifiers in *save, *restore and movem* instructions.
2738 * m68k-opc.c (m68k_opcodes): Fix move and movem instructions for
2741 * m68k-opc.c (m68k_opcodes): The coldfire (mcf5200) can only use
2742 register operands for immediate arithmetic, not, neg, negx, and
2743 set according to condition instructions.
2745 * m68k-opc.c (m68k_opcodes): Consistantly Use "s" as the storage
2746 specifier of the effective-address operand in immediate forms of
2747 arithmetic instructions. The specifier for the immediate operand
2748 notes how and where the constant will be stored.
2750 Mon Nov 25 11:17:01 1996 Jeffrey A Law (law@cygnus.com)
2752 * mn10300-opc.c (mn10300_opcodes): Remove redundant "lcc"
2755 * mn10300-dis.c (disassemble): Use '$' instead of '%' for
2758 * mn10300-dis.c (disassemble): Prefix registers with '%'.
2760 Wed Nov 20 10:37:13 1996 Jeffrey A Law (law@cygnus.com)
2762 * mn10300-dis.c (disassemble): Handle register lists.
2764 * mn10300-opc.c: Fix handling of register list operand for
2765 "call", "ret", and "rets" instructions.
2767 * mn10300-dis.c (disassemble): Print PC-relative and memory
2768 addresses symbolically if possible.
2769 * mn10300-opc.c: Distinguish between absolute memory addresses,
2770 pc-relative offsets & random immediates.
2772 * mn10300-dis.c (print_insn_mn10300): Fix fetch of last byte
2774 (disassemble): Handle SPLIT and EXTENDED operands.
2776 Tue Nov 19 13:33:01 1996 Jeffrey A Law (law@cygnus.com)
2778 * mn10300-dis.c: Rough cut at printing some operands.
2780 * mn10300-dis.c: Start working on disassembler support.
2781 * mn10300-opc.c (mn10300_opcodes): Fix masks on several insns.
2783 * mn10300-opc.c (mn10300_operands): Add "REGS" for a register
2785 (mn10300_opcodes): Use REGS for register list in "movm" instructions.
2787 Mon Nov 18 15:20:35 1996 Michael Meissner <meissner@tiktok.cygnus.com>
2789 * d10v-opc.c (d10v_opcodes): Add3 sets the carry.
2791 Fri Nov 15 13:43:19 1996 Jeffrey A Law (law@cygnus.com)
2793 * mn10300-opc.c (mn10300_opcodes): Demand parens around
2794 register argument is calls and jmp instructions.
2796 Thu Nov 7 00:26:05 1996 Jeffrey A Law (law@cygnus.com)
2798 * mn10300-opc.c (mn10300_opcodes): Use DN01 for putx and
2799 getx operand. Fix opcode for mulqu imm,dn.
2801 Wed Nov 6 13:42:32 1996 Jeffrey A Law (law@cygnus.com)
2803 * mn10300-opc.c (mn10300_operands): Hijack "bits" field
2804 in MN10300_OPERAND_SPLIT operands for how many bits
2805 appear in the basic insn word. Add IMM32_HIGH24,
2806 IMM32_HIGH24_LOWSHIFT8, IMM8E_SHIFT8.
2807 (mn10300_opcodes): Use new operands as needed.
2809 * mn10300-opc.c (mn10300_operands): Add IMM32_LOWSHIFT8
2810 for bset, bclr, btst instructions.
2811 (mn10300_opcodes): Use new IMM32_LOWSHIFT8 as needed.
2813 * mn10300-opc.c (mn10300_operands): Remove many redundant
2814 operands. Update opcode table as appropriate.
2815 (IMM32): Add MN10300_OPERAND_SPLIT flag.
2816 (mn10300_opcodes): Fix single bit error in mov imm32,dn insn.
2818 Tue Nov 5 13:26:58 1996 Jeffrey A Law (law@cygnus.com)
2820 * mn10300-opc.c (mn10300_operands): Add DN2, DM2, AN2, AM2
2821 operands (for indexed load/stores). Fix bitpos for DI
2822 operand. Add SN8N_SHIFT8, IMM8_SHIFT8, and D16_SHIFT for the
2823 few instructions that insert immediates/displacements in the
2824 middle of the instruction. Add IMM8E for 8 bit immediate in
2825 the extended part of an instruction.
2826 (mn10300_operands): Use new opcodes as appropriate.
2828 Tue Nov 5 10:30:51 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2830 * d10v-opc.c (d10v_opcodes): Declare the trap instruction
2831 sequential so the assembler never parallelizes it with
2834 Mon Nov 4 12:50:40 1996 Jeffrey A Law (law@cygnus.com)
2836 * mn10300-opc.c (mn10300_operands): Add DN01 and AN01 for
2837 a data/address register that appears in register field 0
2838 and register field 1.
2839 (mn10300_opcodes): Use DN01 and AN01 for mov/cmp imm8,DN/AN
2841 Fri Nov 1 10:29:11 1996 Richard Henderson <rth@tamu.edu>
2843 * alpha-dis.c (print_insn_alpha): Use new NOPAL mask for
2844 standard disassembly.
2846 * alpha-opc.c (alpha_operands): Rearrange flags slot.
2847 (alpha_opcodes): Add new BWX, CIX, and MAX instructions.
2848 Recategorize PALcode instructions.
2850 Wed Oct 30 16:46:58 1996 Jeffrey A Law (law@cygnus.com)
2852 * v850-opc.c (v850_opcodes): Add relaxing "jbr".
2854 Tue Oct 29 16:30:28 1996 Ian Lance Taylor <ian@cygnus.com>
2856 * mips-dis.c (_print_insn_mips): Don't print a trailing tab if
2857 there are no operand types.
2859 Tue Oct 29 12:22:21 1996 Jeffrey A Law (law@cygnus.com)
2861 * v850-opc.c (D9_RELAX): Renamed from D9, all references
2863 (v850_operands): Make sure D22 immediately follows D9_RELAX.
2865 Fri Oct 25 12:12:53 1996 Ian Lance Taylor <ian@cygnus.com>
2867 * i386-dis.c (print_insn_x86): Set info->bytes_per_line to 5.
2869 Thu Oct 24 17:53:52 1996 Jeffrey A Law (law@cygnus.com)
2871 * v850-opc.c (insert_d8_6): Fix operand insertion for sld.w
2872 and sst.w instructions.
2874 * v850-opc.c (v850_opcodes): Add "jCC" instructions (aliases for
2877 Thu Oct 24 17:21:20 1996 Ian Lance Taylor <ian@cygnus.com>
2879 * mips-dis.c (_print_insn_mips): Use a tab between the instruction
2882 Tue Oct 22 23:32:56 1996 Ian Lance Taylor <ian@cygnus.com>
2884 * ppc-opc.c (PPCPWR2): Define.
2885 (powerpc_opcodes): Use PPCPWR2 for fsqrt, rather than duplicating
2888 Fri Oct 11 16:03:49 1996 Jeffrey A Law (law@cygnus.com)
2890 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode
2891 field for movhu instruction.
2893 * v850-dis.c (disassemble): For V850_OPERAND_SIGNED operands,
2894 cast value to "long" not "signed long" to keep hpux10
2897 Thu Oct 10 10:25:58 1996 Jeffrey A Law (law@cygnus.com)
2899 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode field
2902 * mn10300-opc.c (FMT*): Remove definitions.
2904 * mn10300-opc.c (mn10300_opcodes): Fix destination register
2905 for shift-by-register opcodes.
2907 * mn10300-opc.c (mn10300_operands): Break DN, DM, AN, AM
2908 into [AD][MN][01] for encoding the position of the register
2911 Wed Oct 9 11:19:26 1996 Jeffrey A Law (law@cygnus.com)
2913 * mn10300-opc.c (mn10300_opcodes): Add "extended" instructions,
2914 "putx", "getx", "mulq", "mulqu", "sat16", "sat24", "bsch".
2916 Tue Oct 8 11:55:35 1996 Jeffrey A Law (law@cygnus.com)
2918 * mn10300-opc.c (mn10300_operands): Remove "REGS" operand.
2919 Fix various typos. Add "PAREN" operand.
2920 (MEM, MEM2): Define.
2921 (mn10300_opcodes): Surround all memory addresses with "PAREN"
2922 operands. Fix several typos.
2924 * mn10300-opc.c (mn10300_opcodes): Fix typos in yesterday's
2927 Mon Oct 7 16:48:45 1996 Jeffrey A Law (law@cygnus.com)
2929 * mn10300-opc.c (FMT_XX): Renumber starting at one.
2930 (mn10300_operands): Rough cut. Enough to parse "mov" instructions
2932 (mn10300_opcodes): Break opcode format out into its own field.
2933 Update many operand fields to deal with signed vs unsigned
2934 issues. Fix one or two typos in the "mov" instruction
2935 opcode, mask and/or operand fields.
2937 Mon Oct 7 11:39:49 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2939 * m68k-opc.c (plusha): Prefer encoding for m68040up, in case
2940 m68851 wasn't reset.
2942 Thu Oct 3 17:17:02 1996 Ian Lance Taylor <ian@cygnus.com>
2944 * mn10300-opc.c (mn10300_opcodes): Add opcode & masks for
2945 all opcodes. Very rough cut at operands for all opcodes.
2947 * mn10300-opc.c (mn10300_opcodes): Start fleshing out the
2950 Thu Oct 3 10:06:07 1996 Jeffrey A Law (law@cygnus.com)
2952 * mn10200-opc.c, mn10300-opc.c: New files.
2953 * mn10200-dis.c, mn10300-dis.c: New files.
2954 * mn10x00-opc.c, mn10x00-dis.c: Deleted.
2955 * disassemble.c: Break mn10x00 support into 10200 and 10300
2957 * configure.in: Likewise.
2958 * configure: Rebuilt.
2960 Thu Oct 3 15:59:12 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
2962 * Makefile.in (MOSTLYCLEAN): Move config.log to distclean.
2964 Wed Oct 2 23:28:42 1996 Jeffrey A Law (law@cygnus.com)
2966 * mn10x00-opc.c, mn10x00-dis.c: New files for Matsushita
2968 * disassemble (ARCH_mn10x00): Define.
2969 (disassembler): Handle bfd_arch_mn10x00.
2970 * configure.in: Recognize bfd_mn10x00_arch.
2971 * configure: Rebuilt.
2973 Tue Oct 1 10:49:11 1996 Ian Lance Taylor <ian@cygnus.com>
2975 * i386-dis.c (op_rtn): Change to be a pointer. Adjust uses
2976 accordingly. Don't declare functions using op_rtn.
2978 Fri Sep 27 18:28:59 1996 Stu Grossman (grossman@critters.cygnus.com)
2980 * v850-dis.c (disassemble): Add memaddr argument. Re-arrange
2981 params to be more standard.
2982 * (disassemble): Print absolute addresses and symbolic names for
2983 branch and jump targets.
2984 * v850-opc.c (v850_operand): Add displacement flag to 9 and 22
2986 * (v850_opcodes): Add breakpoint insn.
2988 Mon Sep 23 12:32:26 1996 Ian Lance Taylor <ian@cygnus.com>
2990 * m68k-opc.c: Move the fmovemx data register cases before the
2991 other cases, so that they get recognized before the data register
2992 does gets treated as a degenerate register list.
2994 Tue Sep 17 12:06:51 1996 Ian Lance Taylor <ian@cygnus.com>
2996 * mips-opc.c: Add a case for "div" and "divu" with two registers
2997 and a destination of $0.
2999 Tue Sep 10 16:12:39 1996 Fred Fish <fnf@rtl.cygnus.com>
3001 * mips-dis.c (print_insn_arg): Add prototype.
3002 (_print_insn_mips): Ditto.
3004 Mon Sep 9 14:26:26 1996 Ian Lance Taylor <ian@cygnus.com>
3006 * mips-dis.c (print_insn_arg): Print condition code registers as
3009 Tue Sep 3 12:09:46 1996 Doug Evans <dje@canuck.cygnus.com>
3011 * sparc-opc.c (sparc_opcodes): Add setuw, setsw, setx.
3013 Tue Sep 3 12:05:25 1996 Jeffrey A Law (law@cygnus.com)
3015 * v850-dis.c (disassemble): Make static. Provide prototype.
3017 Sun Sep 1 22:30:40 1996 Jeffrey A Law (law@cygnus.com)
3019 * v850-opc.c (insert_d9, insert_d22): Fix boundary case
3022 Sat Aug 31 01:27:26 1996 Jeffrey A Law (law@cygnus.com)
3024 * v850-dis.c (disassemble): Handle insertion of ',', '[' and
3025 ']' characters into the output stream.
3026 * v850-opc.c (v850_opcodes: Remove size field from all opcodes.
3027 Add "memop" field to all opcodes (for the disassembler).
3028 Reorder opcodes so that "nop" comes before "mov" and "jr"
3029 comes before "jarl".
3031 * v850-dis.c (print_insn_v850): Fix typo in last change.
3033 * v850-dis.c (print_insn_v850): Properly handle disassembling
3034 a two byte insn at the end of a memory region when the memory
3035 region's size is only two byte aligned.
3037 * v850-dis.c (v850_cc_names): Fix stupid thinkos.
3039 * v850-dis.c (v850_reg_names): Define.
3040 (v850_sreg_names, v850_cc_names): Likewise.
3041 (disassemble): Very rough cut at printing operands (unformatted).
3043 * v850-opc.c (BOP_MASK): Fix.
3044 (v850_opcodes): Fix mask for jarl and jr.
3046 * v850-dis.c: New file. Skeleton for disassembler support.
3047 * Makefile.in Remove v850 references, they're not needed here.
3048 * configure.in: Add v850-dis.o when building v850 toolchains.
3049 * configure: Rebuilt.
3050 * disassemble.c (disassembler): Call v850 disassembler.
3052 * v850-opc.c (insert_d8_7, extract_d8_7): New functions.
3053 (insert_d8_6, extract_d8_6): New functions.
3054 (v850_operands): Rename D7S to D7; operand for D7 is unsigned.
3055 Rename D8 to D8_7, use {insert,extract}_d8_7 routines.
3057 (IF4A, IF4B): Use "D7" instead of "D7S".
3058 (IF4C, IF4D): Use "D8_7" instead of "D8".
3059 (IF4E, IF4F): New. Use "D8_6".
3060 (v850_opcodes): Use IF4A/IF4B for sld.b/sst.b. Use IF4C/IF4D for
3061 sld.h/sst.h. Use IF4E/IF4F for sld.w/sst.w.
3063 * v850-opc.c (insert_d16_15, extract_d16_15): New functions.
3064 (v850_operands): Change D16 to D16_15, use special insert/extract
3065 routines. New new D16 that uses the generic insert/extract code.
3066 (IF7A, IF7B): Use D16_15.
3067 (IF7C, IF7D): New. Use D16.
3068 (v850_opcodes): Use IF7C and IF7D for ld.b and st.b.
3070 * v850-opc.c (insert_d9, insert_d22): Slightly improve error
3071 message. Issue an error if the branch offset is odd.
3073 * v850-opc.c: Add notes about needing special insert/extract
3074 for all the load/store insns, except "ld.b" and "st.b".
3076 * v850-opc.c (insert_d22, extract_d22): New functions.
3077 (v850_operands): Use insert_d22 and extract_d22 for
3079 (insert_d9): Fix range check.
3081 Fri Aug 30 18:01:02 1996 J.T. Conklin <jtc@hippo.cygnus.com>
3083 * v850-opc.c (v850_operands): Add V850_OPERAND_SIGNED flag
3084 and set bits field to D9 and D22 operands.
3086 Thu Aug 29 11:10:46 1996 Jeffrey A Law (law@cygnus.com)
3088 * v850-opc.c (v850_operands): Define SR2 operand.
3089 (v850_opcodes): "ldsr" uses R1,SR2.
3091 * v850-opc.c (v850_opcodes): Fix opcode specs for
3092 sld.w, sst.b, sst.h, sst.w, and nop.
3094 Wed Aug 28 15:55:43 1996 Jeffrey A Law (law@cygnus.com)
3096 * v850-opc.c (v850_opcodes): Add null opcode to mark the
3097 end of the opcode table.
3099 Mon Aug 26 13:35:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3101 * d10v-opc.c (pre_defined_registers): Added register pairs,
3102 "r0-r1", "r2-r3", etc.
3104 Fri Aug 23 00:27:01 1996 Jeffrey A Law (law@cygnus.com)
3106 * v850-opc.c (v850_operands): Make I16 be a signed operand.
3107 Create I16U for an unsigned 16bit mmediate operand.
3108 (v850_opcodes): Use I16U for "ori", "andi" and "xori".
3110 * v850-opc.c (v850_operands): Define EP operand.
3111 (IF4A, IF4B, IF4C, IF4D): Use EP.
3113 * v850-opc.c (v850_opcodes): Fix opcode numbers for "mov"
3114 with immediate operand, "movhi". Tweak "ldsr".
3116 * v850-opc.c (v850_opcodes): Get ld.[bhw] and st.[bhw]
3117 correct. Get sld.[bhw] and sst.[bhw] closer.
3119 * v850-opc.c (v850_operands): "not" is a two byte insn
3121 * v850-opc.c (v850_opcodes): Correct bit pattern for setf.
3123 * v850-opc.c (v850_operands): D16 inserts at offset 16!
3125 * v850-opc.c (two): Get order of words correct.
3127 * v850-opc.c (v850_operands): I16 inserts at offset 16!
3129 * v850-opc.c (v850_operands): Add "SR1" and "SR2" for system
3130 register source and destination operands.
3131 (v850_opcodes): Use SR1 and SR2 for "ldsr" and "stsr".
3133 * v850-opc.c (v850_opcodes): Fix thinko in "jmp" opcode. Fix
3134 same thinko in "trap" opcode.
3136 * v850-opc.c (v850_opcodes): Add initializer for size field
3139 * v850-opc.c (v850_operands): D6 -> DS7. References changed.
3140 Add D8 for 8-bit unsigned field in short load/store insns.
3141 (IF4A, IF4D): These both need two registers.
3142 (IF4C, IF4D): Define. Use 8-bit unsigned field.
3143 (v850_opcodes): For "sld.h", "sld.w", "sst.h", "sst.w", use
3144 IF4C & IF4D. For "trap" use I5U, not I5. Add IF1 operand
3145 for "ldsr" and "stsr".
3146 * v850-opc.c (v850_operands): 3-bit immediate for bit insns
3149 * v850-opc.c (v850_opcodes): Correct short store half (sst.h) and
3150 short store word (sst.w).
3152 Thu Aug 22 16:57:27 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3154 * v850-opc.c (v850_operands): Added insert and extract fields,
3155 pointers to functions that handle unusual operand encodings.
3157 Thu Aug 22 01:05:24 1996 Jeffrey A Law (law@cygnus.com)
3159 * v850-opc.c (v850_opcodes): Enable "trap".
3161 * v850-opc.c (v850_opcodes): Fix order of displacement
3162 and register for "set1", "clr1", "not1", and "tst1".
3164 Wed Aug 21 18:46:26 1996 Jeffrey A Law (law@cygnus.com)
3166 * v850-opc.c (v850_operands): Add "B3" support.
3167 (v850_opcodes): Fix and enable "set1", "clr1", "not1"
3170 * v850-opc.c (v850_opcodes): "jmp" has only an R1 operand.
3172 * v850-opc.c: Close unterminated comment.
3174 Wed Aug 21 17:31:26 1996 J.T. Conklin <jtc@hippo.cygnus.com>
3176 * v850-opc.c (v850_operands): Add flags field.
3177 (v850_opcodes): add move opcodes.
3179 Tue Aug 20 14:41:03 1996 J.T. Conklin <jtc@hippo.cygnus.com>
3181 * Makefile.in (ALL_MACHINES): Add v850-opc.o.
3182 * configure: (bfd_v850v_arch) Add new case.
3183 * configure.in: (bfd_v850_arch) Add new case.
3184 * v850-opc.c: New file.
3186 Mon Aug 19 15:21:38 1996 Doug Evans <dje@canuck.cygnus.com>
3188 * sparc-dis.c (print_insn_sparc): Handle little endian sparcs.
3190 Thu Aug 15 13:14:43 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3192 * d10v-opc.c: Add additional information to the opcode
3193 table to help determinine which instructions can be done
3196 Thu Aug 15 13:11:13 1996 Stan Shebs <shebs@andros.cygnus.com>
3198 * mpw-make.sed: Update editing of include pathnames to be
3201 Thu Aug 15 16:28:41 1996 James G. Smith <jsmith@cygnus.co.uk>
3203 * arm-opc.h: Added "bx" instruction definition.
3205 Wed Aug 14 17:00:04 1996 Richard Henderson <rth@tamu.edu>
3207 * alpha-opc.c (EV4EXTHWINDEX): Field width should be 8 not 5.
3209 Mon Aug 12 14:30:37 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3211 * d10v-opc.c (d10v_opcodes): Minor fixes to addi and bl.l.
3213 Fri Aug 9 13:21:59 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3215 * d10v-opc.c (d10v_opcodes): Correct 'mv' unit entry to EITHER.
3217 Thu Aug 8 12:43:52 1996 Klaus Kaempf <kkaempf@progis.de>
3219 * makefile.vms: Update for alpha-opc changes.
3221 Wed Aug 7 11:55:10 1996 Ian Lance Taylor <ian@cygnus.com>
3223 * i386-dis.c (print_insn_i386): Actually return the correct value.
3224 (ONE, OP_ONE): #ifdef out; not used.
3226 Fri Aug 2 17:47:03 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3228 * d10v-opc.c (d10v_opcodes): Added 2 accumulator sub instructions.
3229 Changed subi operand type to treat 0 as 16.
3231 Wed Jul 31 16:21:41 1996 Ian Lance Taylor <ian@cygnus.com>
3233 * m68k-opc.c: Add cpushl for the mcf5200. From Ken Rose
3236 Wed Jul 31 14:39:27 1996 James G. Smith <jsmith@cygnus.co.uk>
3238 * arm-opc.h: (arm_opcodes): Added halfword and sign-extension
3239 memory transfer instructions. Add new format string entries %h and %s.
3240 * arm-dis.c: (print_insn_arm): Provide decoding of the new
3243 Fri Jul 26 11:45:04 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3245 * d10v-opc.c (d10v_operands): Added UNUM4S; a 4-bit accumulator shift.
3246 (d10v_opcodes): Modified accumulator shift instructions to use UNUM4S.
3248 Fri Jul 26 14:01:43 1996 Ian Lance Taylor <ian@cygnus.com>
3250 * alpha-dis.c (print_insn_alpha_osf): Remove.
3251 (print_insn_alpha_vms): Remove.
3252 (print_insn_alpha): Make globally visible. Chose the register
3253 names based on info->flavour.
3254 * disassemble.c: Always return print_insn_alpha for the alpha.
3256 Thu Jul 25 15:24:17 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3258 * d10v-dis.c (dis_long): Handle unknown opcodes.
3260 Thu Jul 25 12:08:09 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3262 * d10v-opc.c: Changes to support signed and unsigned numbers.
3263 All instructions with the same name that have long and short forms
3264 now end in ".l" or ".s". Divs added.
3265 * d10v-dis.c: Changes to support signed and unsigned numbers.
3267 Tue Jul 23 11:02:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3269 * d10v-dis.c: Change all functions to use info->print_address_func.
3271 Mon Jul 22 15:38:53 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
3273 * m68k-opc.c (m68k_opcodes): Make opcode masks for the ColdFire
3274 move ccr/sr insns more strict so that the disassembler only
3275 selects them when the addressing mode is data register.
3277 Mon Jul 22 11:25:24 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3278 * d10v-opc.c (pre_defined_registers): Declare.
3279 * d10v-dis.c (print_operand): Now uses pre_defined_registers
3280 to pick a better name for the registers.
3282 Mon Jul 22 13:47:23 1996 Ian Lance Taylor <ian@cygnus.com>
3284 * sparc-opc.c: Fix opcode values for fpack16, and fpackfix. Fix
3285 operands for fexpand and fpmerge. From Christian Kuehnke
3286 <Christian.Kuehnke@arbi.informatik.uni-oldenburg.de>.
3288 Mon Jul 22 13:17:06 1996 Richard Henderson <rth@tamu.edu>
3290 * alpha-dis.c (print_insn_alpha): No longer the user-visible
3291 print routine. Take new regnames and cpumask arguments.
3292 Kill the environment variable nonsense.
3293 (print_insn_alpha_osf): New function. Do OSF/1 style regnames.
3294 (print_insn_alpha_vms): New function. Do VMS style regnames.
3295 * disassemble.c (disassembler): Test bfd flavour to pick
3296 between OSF and VMS routines. Default to OSF.
3298 Thu Jul 18 17:19:34 1996 Ian Lance Taylor <ian@cygnus.com>
3300 * configure.in: Call AC_SUBST (INSTALL_SHLIB).
3301 * configure: Rebuild.
3302 * Makefile.in (install): Use @INSTALL_SHLIB@.
3304 Wed Jul 17 14:39:05 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3306 * configure: (bfd_d10v_arch) Add new case.
3307 * configure.in: (bfd_d10v_arch) Add new case.
3308 * d10v-dis.c: New file.
3309 * d10v-opc.c: New file.
3310 * disassemble.c (disassembler) Add entry for d10v.
3312 Wed Jul 17 10:12:05 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3314 * m68k-opc.c (m68k_opcodes): Fix bugs in coldfire insns relating
3315 to bcc, trapfl, subxl, and wddata discovered by Andreas Schwab.
3317 Mon Jul 15 16:59:55 1996 Stu Grossman (grossman@critters.cygnus.com)
3319 * i386-dis.c: Get rid of print_insn_i8086. Use info.mach to
3320 distinguish between variants of the instruction set.
3321 * sparc-dis.c: Get rid of print_insn_sparclite. Use info.mach to
3322 distinguish between variants of the instruction set.
3324 Fri Jul 12 10:12:01 1996 Stu Grossman (grossman@critters.cygnus.com)
3326 * i386-dis.c (print_insn_i8086): New routine to disassemble using
3327 the 8086 instruction set.
3328 * i386-dis.c: General cleanups. Make most things static. Add
3329 prototypes. Get rid of static variables aflags and dflags. Pass
3330 them as args (to almost everything).
3332 Thu Jul 11 11:58:44 1996 Jeffrey A Law (law@cygnus.com)
3334 * h8300-dis.c (bfd_h8_disassemble): Handle macregs in ldmac insns.
3336 * h8300-dis.c (bfd_h8_disassemble): Handle "ldm.l" and "stm.l".
3338 * h8300-dis.c (bfd_h8_disassemble): "abs" is implicitly two
3339 if the next arg is marked with SRC_IN_DST. Gross.
3341 * h8300-dis.c (bfd_h8_disassemble): Print "exr" when
3342 we're looking for and find EXR.
3344 * h8300-dis.c (bfd_h8_disassemble): We don't have a match
3345 if we're looking for KBIT and we don't find it.
3347 * h8300-dis.c (bfd_h8_disassemble): Mask off unwanted bits
3350 * h8300-dis.c (bfd_h8_disassemble): Don't set plen for
3351 3bit immediate operands.
3353 Tue Jul 9 10:55:20 1996 Ian Lance Taylor <ian@cygnus.com>
3355 * Released binutils 2.7.
3357 * alpha-opc.c: Add new case of "mov". From Klaus Kaempf
3358 <kkaempf@progis.ac-net.de>.
3360 Thu Jul 4 11:42:51 1996 Ian Lance Taylor <ian@cygnus.com>
3362 * alpha-opc.c: Correct second case of "mov" to use OPRL.
3364 Wed Jul 3 16:03:47 1996 Stu Grossman (grossman@critters.cygnus.com)
3366 * sparc-dis.c (print_insn_sparclite): New routine to print
3367 sparclite instructions.
3369 Wed Jul 3 14:21:18 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3371 * m68k-opc.c (m68k_opcodes): Add coldfire support.
3373 Fri Jun 28 15:53:51 1996 Doug Evans <dje@canuck.cygnus.com>
3375 * sparc-opc.c (asi_table): Add #ASI_N, #ASI_N_L, #ASI_NUCLEUS,
3376 #ASI_NUCLEUS_LITTLE. Rename #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_L
3377 to #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_LITTLE.
3379 Tue Jun 25 22:58:31 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
3381 * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir):
3382 Use autoconf-set values.
3383 (docdir, oldincludedir): Removed.
3384 * configure.in (AC_PREREQ): autoconf 2.5 or higher.
3386 Fri Jun 21 13:53:36 1996 Richard Henderson <rth@tamu.edu>
3388 * alpha-opc.c: New file.
3389 * alpha-opc.h: Remove.
3390 * alpha-dis.c: Complete rewrite to use new opcode table.
3391 * configure.in: For bfd_alpha_arch, use alpha-opc.o.
3392 * configure: Rebuild with autoconf 2.10.
3393 * Makefile.in (ALL_MACHINES): Add alpha-opc.o.
3394 (alpha-dis.o): Depend upon $(INCDIR)/opcode/alpha.h, not
3396 (alpha-opc.o): New target.
3398 Wed Jun 19 15:55:12 1996 Ian Lance Taylor <ian@cygnus.com>
3400 * sparc-dis.c (print_insn_sparc): Remove unused local variable i.
3401 Set imm_added_to_rs1 even if the source and destination register
3404 * sparc-opc.c: Add some two operand forms of the wr instruction.
3406 Tue Jun 18 15:58:27 1996 Jeffrey A. Law <law@rtl.cygnus.com>
3408 * h8300-dis.c (bfd_h8_disassemble): Rename "hmode" argument
3411 * disassemble.c (disassembler): Handle H8/S.
3412 * h8300-dis.c (print_insn_h8300s): New function for H8/S.
3414 Tue Jun 18 18:06:50 1996 Ian Lance Taylor <ian@cygnus.com>
3416 * sparc-opc.c: Add beq/teq as aliases for be/te.
3418 * ppc-opc.c: Fix fcmpo opcode. From Sergei Steshenko
3419 <sergei@msil.sps.mot.com>.
3421 Tue Jun 18 15:08:54 1996 Klaus Kaempf <kkaempf@progis.de>
3423 * makefile.vms: New file.
3425 * alpha-dis.c (print_insn_alpha): Print lda ra,lit(rz) as mov.
3427 Mon Jun 10 18:50:38 1996 Ian Lance Taylor <ian@cygnus.com>
3429 * h8300-dis.c (bfd_h8_disassemble): Always print ABS8MEM with :8,
3432 Tue Jun 4 09:15:53 1996 Doug Evans <dje@canuck.cygnus.com>
3434 * i386-dis.c (OP_OFF): Call append_prefix.
3436 Thu May 23 15:18:23 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3438 * ppc-opc.c (instruction encoding macros): Add explicit casts to
3439 unsigned long to silence a warning from the Solaris PowerPC
3442 Thu Apr 25 19:33:32 1996 Doug Evans <dje@canuck.cygnus.com>
3444 * sparc-opc.c (sparc_opcodes): Add ultrasparc vis extensions.
3446 Mon Apr 22 17:12:35 1996 Doug Evans <dje@blues.cygnus.com>
3448 * sparc-dis.c (X_IMM,X_SIMM): New macros.
3450 (print_insn_sparc): Merge cases i,I,j together. New cases X,Y.
3451 * sparc-opc.c (sparc_opcodes): Use X for 5 bit shift constants,
3452 Y for 6 bit shift constants. Rewrite entries for crdcxt, cwrcxt,
3453 cpush, cpusha, cpull sparclet insns.
3455 Wed Apr 17 14:20:22 1996 Doug Evans <dje@canuck.cygnus.com>
3457 * sparc-dis.c (compute_arch_mask): Replace ANSI style def with K&R.
3459 Thu Apr 11 17:30:02 1996 Ian Lance Taylor <ian@cygnus.com>
3461 * sparc-opc.c: Set F_FBR on floating point branch instructions.
3462 Set F_FLOAT on other floating point instructions.
3464 Mon Apr 8 17:02:48 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3466 * ppc-opc.c (PPC860): Macro for 860/821 specific instructions and
3468 (powerpc_opcodes): Add 860/821 specific SPRs.
3470 Mon Apr 8 14:00:44 1996 Ian Lance Taylor <ian@cygnus.com>
3472 * configure.in: Permit --enable-shared to specify a list of
3473 directories. Set and substitute BFD_PICLIST.
3474 * configure: Rebuild.
3475 * Makefile.in (BFD_PICLIST): Rename from BFD_LIST. Change all
3476 uses. Set to @BFD_PICLIST@.
3478 Fri Apr 5 17:12:27 1996 Jeffrey A Law (law@cygnus.com)
3480 * h8300-dis.c (bfd_h8_disassemble): Use "bit" for L_3 immediates,
3481 not "abs", which may be needed for the absolute in something
3482 like btst #0,@10:8. Print L_3 immediates separately from other
3483 immediates. Change ABSMOV reference to ABS8MEM.
3485 Wed Apr 3 10:40:45 1996 Doug Evans <dje@canuck.cygnus.com>
3487 * sparc-dis.c (opcodes_initialized): Move inside print_insn_sparc.
3488 (current_arch_mask): New static global.
3489 (compute_arch_mask): New static function.
3490 (print_insn_sparc): Delete sparc_v9_p. New static local
3491 current_mach. Resort opcode table if current_mach changes.
3492 Generalize "insn not supported" test.
3493 (compare_opcodes): Prefer supported opcodes to nonsupported ones.
3494 Delete test for v9/!v9.
3495 * sparc-opc.c (MASK_*): Use SPARC_OPCODE_ARCH_MASK.
3497 (brfc): Split into CBR and FBR for coprocessor/fp branches.
3498 (brfcx): Renamed to FBRX.
3499 (condfc): Renamed to CONDFC. Pass v6notlet to CBR (standard
3500 coprocessor mnemonics are not supported on the sparclet).
3501 (condf): Renamed to CONDF.
3502 (SLCBCC2): Delete F_ALIAS flag.
3504 Sat Mar 30 21:45:59 1996 Doug Evans <dje@canuck.cygnus.com>
3506 * sparc-opc.c (sparc_opcodes): rd must be 0 for
3507 mov foo,{%y,%psr,%wim,%tbr}. Support mov foo,%asrX.
3509 Fri Mar 29 13:02:40 1996 Ian Lance Taylor <ian@cygnus.com>
3511 * Makefile.in (config.status): Depend upon BFD VERSION file, so
3512 that the shared library version number is set correctly.
3514 Tue Mar 26 15:47:14 1996 Ian Lance Taylor <ian@cygnus.com>
3516 * configure.in: Use AC_CHECK_TOOL to find ar and ranlib. From
3517 Miles Bader <miles@gnu.ai.mit.edu>.
3518 * configure: Rebuild.
3520 Sat Mar 16 13:04:07 1996 Fred Fish <fnf@cygnus.com>
3522 * z8kgen.c (internal, gas): Call xmalloc rather than unchecked
3525 Tue Mar 12 12:14:10 1996 Ian Lance Taylor <ian@cygnus.com>
3527 * configure: Rebuild with autoconf 2.8.
3529 Thu Mar 7 15:11:10 1996 Doug Evans <dje@charmed.cygnus.com>
3531 * sparc-dis.c (print_insn_sparc): Handle 'O' operand char like 'r'.
3532 * sparc-opc.c (sparc_opcodes): Use 'O' operand char for `neg reg'.
3534 Tue Mar 5 15:51:57 1996 Ian Lance Taylor <ian@cygnus.com>
3536 * configure.in: Don't set SHLIB or SHLINK to an empty string,
3537 since they appear as targets in Makefile.in.
3538 * configure: Rebuild.
3540 Mon Feb 26 13:03:40 1996 Stan Shebs <shebs@andros.cygnus.com>
3542 * mpw-make.sed: Edit out shared library support bits.
3544 Tue Feb 20 20:48:28 1996 Doug Evans <dje@charmed.cygnus.com>
3546 * sparc-opc.c (v8,v6notv9): Add MASK_SPARCLET.
3547 (sparc_opcode_archs): Add MASK_V8 to sparclet entry.
3548 (sparc_opcodes): Add sparclet insns.
3549 (sparclet_cpreg_table): New static local.
3550 (sparc_{encode,decode}_sparclet_cpreg): New functions.
3551 * sparc-dis.c (print_insn_sparc): Handle sparclet cpregs.
3553 Tue Feb 20 11:02:44 1996 Alan Modra <alan@mullet.Levels.UniSA.Edu.Au>
3555 * i386-dis.c (index16): New static variable.
3556 (putop): Print jecxz for 32 bit case, jcxz for 16 bit, not the
3558 (OP_indirE): Return result of OP_E.
3559 (OP_E): Check for 16 bit addressing mode, and disassemble
3560 correctly. Optimised 32 bit case a little. Don't print
3561 "(base,index,scale)" when sib specifies only an offset.
3563 Mon Feb 19 12:32:17 1996 Ian Lance Taylor <ian@cygnus.com>
3565 * configure.in: Set and substitute SHLIB_DEP.
3566 * configure: Rebuild.
3567 * Makefile.in (SHLIB_DEP): New variable.
3568 (LIBIBERTY_LISTS, BFD_LIST): New variables.
3569 (stamp-piclist): Depend upon LIBIBERTY_LISTS and BFD_LIST. If
3570 COMMON_SHLIB, add them to piclist with appropriate modifications.
3571 ($(SHLIB)): Depend upon $(SHLIB_DEP). Don't check COMMON_SHLIB
3572 here: just use piclist.
3574 Mon Feb 19 02:03:50 1996 Doug Evans <dje@charmed.cygnus.com>
3576 * sparc-dis.c (MASK_V9,V9_ONLY_P,V9_P): Define.
3577 (print_insn_sparc): Rewrite v9/not-v9 tests.
3578 (compare_opcodes): Likewise.
3579 * sparc-opc.c (MASK_<ARCH>): Define.
3580 (v6,v7,v8,sparclite,v9,v9a): Redefine.
3581 (sparclet,v6notv9): Define.
3582 (sparc_opcode_archs): Delete member `conflicts'. Add `supported'.
3583 (sparc_opcodes): Delete F_NOTV9, use v6notv9 instead.
3585 Thu Feb 15 14:45:05 1996 Ian Lance Taylor <ian@cygnus.com>
3587 * configure.in: Call AC_PROG_CC before configure.host.
3588 * configure: Rebuild.
3590 * Makefile.in (SONAME): Remove leading ../bfd/ from $(SHLIB).
3592 Wed Feb 14 19:01:27 1996 Alan Modra <alan@spri.levels.unisa.edu.au>
3594 * i386-dis.c (onebyte_has_modrm): New static array.
3595 (twobyte_has_modrm): New static array.
3596 (print_insn_i386): Only fetch the mod/reg/rm byte if it is needed.
3598 Tue Feb 13 15:15:01 1996 Ian Lance Taylor <ian@cygnus.com>
3600 * Makefile.in ($(SHLINK)): Check ts against $(SHLIB), not
3603 Mon Feb 12 16:26:06 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3605 * ppc-opc.c (PPC): Undef, so default defination on Windows NT
3608 Wed Feb 7 13:59:54 1996 Ian Lance Taylor <ian@cygnus.com>
3610 * m68k-opc.c (m68k_opcodes): The bkpt instruction is supported on
3611 m68010up, not just m68020up | cpu32.
3613 * Makefile.in (SONAME): New variable.
3614 ($(SHLINK)): Make a link to the transformed name, as well.
3615 (stamp-tshlink): New target.
3616 (install): Skip stamp-tshlink during install.
3618 Tue Feb 6 12:28:54 1996 Ian Lance Taylor <ian@cygnus.com>
3620 * configure.in: Call AC_ARG_PROGRAM.
3621 * configure: Rebuild.
3622 * Makefile.in (program_transform_name): New variable.
3623 (install): Transform library name before installing it.
3625 Mon Feb 5 16:14:42 1996 Ian Lance Taylor <ian@cygnus.com>
3627 * i960-dis.c (mem): Add HX dcinva instruction.
3629 Support for building as a shared library, based on patches from
3630 Alan Modra <alan@spri.levels.unisa.edu.au>:
3631 * configure.in: Add AC_ARG_ENABLE for shared and commonbfdlib.
3632 New substitutions: ALLLIBS, PICFLAG, SHLIB, SHLIB_CC,
3633 SHLIB_CFLAGS, COMMON_SHLIB, SHLINK.
3634 * configure: Rebuild.
3635 * Makefile.in (ALLLIBS): New variable.
3636 (PICFLAG, SHLIB, SHLIB_CC, SHLIB_CFLAGS): New variables.
3637 (COMMON_SHLIB, SHLINK): New variables.
3638 (.c.o): If PICFLAG is set, compile twice, once PIC, once normal.
3639 (STAGESTUFF): Remove variable.
3640 (all): Depend upon $(ALLLIBS) rather than $(TARGETLIB).
3641 (stamp-piclist, piclist): New targets.
3642 ($(SHLIB), $(SHLINK)): New targets.
3643 ($(OFILES)): Depend upon stamp-picdir.
3644 (disassemble.o): Build twice if PICFLAG is set.
3645 (MOSTLYCLEAN): Add pic/*.o.
3646 (clean): Remove $(SHLIB), $(SHLINK), piclist, and stamp-piclist.
3647 (distclean): Remove pic and stamp-picdir.
3648 (install): Install shared libraries.
3649 (stamp-picdir): New target.
3651 Fri Feb 2 17:15:25 1996 Doug Evans <dje@charmed.cygnus.com>
3653 * sparc-dis.c (print_insn_sparc): Delete DISASM_RAW_INSN support.
3654 Print unknown instruction as "unknown", rather than in hex.
3656 Tue Jan 30 14:06:08 1996 Ian Lance Taylor <ian@cygnus.com>
3658 * dis-buf.c: Include "sysdep.h" before "dis-asm.h".
3660 Thu Jan 25 20:24:07 1996 Doug Evans <dje@charmed.cygnus.com>
3662 * sparc-opc.c (sparc_opcode_archs): Mark v8/sparclite as conflicting.
3664 Thu Jan 25 11:56:49 1996 Ian Lance Taylor <ian@cygnus.com>
3666 * i386-dis.c (print_insn_i386): Only fetch the mod/reg/rm byte
3667 when necessary. From Ulrich Drepper
3668 <drepper@myware.rz.uni-karlsruhe.de>.
3670 Thu Jan 25 03:39:10 1996 Doug Evans <dje@charmed.cygnus.com>
3672 * sparc-dis.c (print_insn_sparc): NUMOPCODES replaced with
3673 sparc_num_opcodes. Update architecture enum values.
3674 * sparc-opc.c (sparc_opcode_archs): Replaces architecture_pname.
3675 (sparc_opcode_lookup_arch): New function.
3676 (sparc_num_opcodes): Renamed from bfd_sparc_num_opcodes.
3677 (sparc_opcodes): Add v9a shutdown insn.
3679 Mon Jan 22 08:29:59 1996 Doug Evans <dje@charmed.cygnus.com>
3681 * sparc-dis.c (print_insn_sparc): Renamed from print_insn.
3682 If DISASM_RAW_INSN, print insn in hex. Handle v9a as opcode
3684 (print_insn_sparc64): Deleted.
3685 * disassemble.c (disassembler, case bfd_arch_sparc): Always use
3688 * sparc-opc.c (architecture_pname): Add v9a.
3690 Fri Jan 12 14:35:58 1996 David Mosberger-Tang <davidm@AZStarNet.com>
3692 * alpha-opc.h (alpha_insn_set): VAX floating point opcode was
3693 incorrectly defined as 0x16 when it should be 0x15.
3694 (FLOAT_FORMAT_MASK): function code is 11 bits, not just 7 bits!
3695 (alpha_insn_set): added cvtst and cvttq float ops. Also added
3696 excb (exception barrier) which is defined in the Alpha
3697 Architecture Handbook version 2.
3698 * alpha-dis.c (print_insn_alpha): Fixed special-case decoding for
3699 OPERATE_FORMAT_CODE type instructions. The bug caused mulq to be
3700 disassembled as or, for example.
3702 Wed Jan 10 12:37:22 1996 Ian Lance Taylor <ian@cygnus.com>
3704 * mips-dis.c (print_insn_arg): Print cases 'i' and 'u' in hex.
3705 (_print_insn_mips): Change i from int to unsigned int.
3707 Thu Jan 4 17:21:10 1996 David Edelsohn <edelsohn@mhpcc.edu>
3709 * ppc-opc.c (powerpc_opcodes): tlbi POWER opcode form different
3710 from tlbie PowerPC opcode. Add PPC603 tlbld and tlbli.
3712 Thu Dec 28 13:29:19 1995 John Hassey <hassey@rtp.dg.com>
3714 * i386-dis.c: Added Pentium Pro instructions.
3716 Tue Dec 19 22:56:35 1995 Michael Meissner <meissner@tiktok.cygnus.com>
3718 * ppc-opc.c (fsqrt{,.}): Duplicate for PowerPC in addition to
3721 Fri Dec 15 14:14:15 1995 J.T. Conklin <jtc@rtl.cygnus.com>
3723 * sh-opc.h (sh_nibble_type): Added REG_B.
3724 (sh_arg_type): Added A_REG_B.
3725 (sh_table): Added pref and bank reg versions of ldc, ldc.l, stc
3727 * sh-dis.c (print_insn_shx): Added cases for REG_B and A_REG_B.
3729 Fri Dec 15 16:44:31 1995 Ian Lance Taylor <ian@cygnus.com>
3731 * disassemble.c (disassembler): Use new bfd_big_endian macro.
3733 Tue Dec 12 12:22:24 1995 Ian Lance Taylor <ian@cygnus.com>
3735 * Makefile.in (distclean): Remove stamp-h. From Ronald
3736 F. Guilmette <rfg@monkeys.com>.
3738 Tue Dec 5 13:42:44 1995 Stan Shebs <shebs@andros.cygnus.com>
3740 From David Mosberger-Tang <davidm@azstarnet.com>:
3741 * alpha-dis.c (print_insn_alpha): fixed decoding of cpys
3744 Mon Dec 4 12:29:05 1995 J.T. Conklin <jtc@rtl.cygnus.com>
3746 * sh-opc.h (sh_arg_type): Added A_SSR and A_SPC.
3747 (sh_table): Added many SH3 opcodes.
3748 * sh-dis.c (print_insn_shx): Added cases for A_SSR and A_SPC.
3750 Fri Dec 1 07:42:18 1995 Michael Meissner <meissner@tiktok.cygnus.com>
3752 * ppc-opc.c (subfc., subfco): Mark this PPCCOM, not PPC.
3753 (subco,subco.): Mark this PPC, not PPCCOM.
3755 Mon Nov 27 13:09:52 1995 Ian Lance Taylor <ian@cygnus.com>
3757 * configure: Rebuild with autoconf 2.7.
3759 Tue Nov 21 18:28:06 1995 Ian Lance Taylor <ian@cygnus.com>
3761 * configure: Rebuild with autoconf 2.6.
3763 Wed Nov 15 19:02:53 1995 Ken Raeburn <raeburn@cygnus.com>
3765 * configure.in: Sort list of architectures. Accept but do nothing
3766 for alliant, convex, pyramid, romp, and tahoe.
3768 Wed Nov 8 20:18:59 1995 Ian Lance Taylor <ian@cygnus.com>
3770 * a29k-dis.c (print_special): Change num to unsigned int.
3772 Wed Nov 8 20:10:35 1995 Eric Freudenthal <freudenthal@nyu.edu>
3774 * a29k-dis.c (print_insn): Cast insn24 to unsigned long when
3777 Tue Nov 7 15:21:06 1995 Ian Lance Taylor <ian@cygnus.com>
3779 * configure.in: Call AC_CHECK_PROG to find and cache AR.
3780 * configure: Rebuilt.
3782 Mon Nov 6 17:39:47 1995 Harry Dolan <dolan@ssd.intel.com>
3784 * configure.in: Add case for bfd_i860_arch.
3785 * configure: Rebuild.
3787 Fri Nov 3 12:45:31 1995 Ian Lance Taylor <ian@cygnus.com>
3789 * m68k-opc.c (m68k_opcodes): Correct fmoveml operands.
3790 * m68k-dis.c (NEXTSINGLE): Change i to unsigned int.
3791 (NEXTDOUBLE): Likewise.
3792 (print_insn_m68k): Don't match fmoveml if there is more than one
3793 register in the list.
3794 (print_insn_arg): Handle a place of '8' for a type of 'L'.
3796 Thu Nov 2 23:06:33 1995 Ian Lance Taylor <ian@cygnus.com>
3798 * m68k-opc.c: Use #W rather than #w.
3799 * m68k-dis.c (print_insn_arg): Handle new 'W' place.
3801 Wed Nov 1 13:30:24 1995 Ian Lance Taylor <ian@cygnus.com>
3803 * m68k-opc.c (m68k_opcode_aliases): Add dbfw as an alias for dbf,
3804 and likewise for all the dbxx opcodes.
3806 Mon Oct 30 20:50:40 1995 Fred Fish <fnf@cygnus.com>
3808 * arc-dis.c: Include elf-bfd.h rather than libelf.h.
3810 Mon Oct 23 11:11:34 1995 James G. Smith <jsmith@pasanda.cygnus.co.uk>
3812 * mips-opc.c: Added shorthand (V1) for INSN_4100 manifest. Added
3813 the VR4100 specific instructions to the mips_opcodes structure.
3815 Thu Oct 19 11:05:23 1995 Stan Shebs <shebs@andros.cygnus.com>
3817 * mpw-config.in, mpw-make.sed: Remove ugly workaround for
3818 ugly Metrowerks bug in CW6, is fixed in CW7.
3820 Mon Oct 16 12:59:01 1995 Michael Meissner <meissner@tiktok.cygnus.com>
3822 * ppc-opc.c (whole file): Add flags for common/any support.
3824 Tue Oct 10 11:06:07 1995 Fred Fish <fnf@cygnus.com>
3826 * Makefile.in (BISON): Remove macro.
3827 (FLAGS_TO_PASS): Remove BISON.
3829 Fri Oct 6 16:26:45 1995 Ken Raeburn <raeburn@cygnus.com>
3831 Mon Sep 25 22:49:32 1995 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
3833 * m68k-dis.c (print_insn_m68k): Recognize all two-word
3834 instructions that take no args by looking at the match mask.
3835 (print_insn_arg): Always print "%" before register names.
3836 [case 'c']: Use "nc" for the no-cache case, as recognized by gas.
3837 [case '_']: Don't print "@#" before address.
3838 [case 'J']: Use "%s" as format string, not register name.
3839 [case 'B']: Treat place == 'C' like 'l' and 'L'.
3841 Thu Oct 5 22:16:20 1995 Ken Raeburn <raeburn@cygnus.com>
3843 * i386-dis.c: Describe cmpxchg8b operand, and spell the opcode
3846 Tue Oct 3 08:30:20 1995 steve chamberlain <sac@slash.cygnus.com>
3848 From David Mosberger-Tang <davidm@azstarnet.com>
3850 * alpha-opc.h (MEMORY_FUNCTION_FORMAT_MASK): added.
3851 (alpha_insn_set): added definitions for VAX floating point
3852 instructions (Unix compilers don't generate these, but handcoded
3853 assembly might still use them).
3855 * alpha-dis.c (print_insn_alpha): added support for disassembling
3856 the miscellaneous instructions in the Alpha instruction set.
3858 Tue Sep 26 18:47:20 1995 Stan Shebs <shebs@andros.cygnus.com>
3860 * mpw-config.in: Add m68k-opc.c.o to BFD_MACHINES for m68k,
3861 no longer create sysdep.h, sed ppc-opc.c to work around a
3862 serious Metrowerks C bug.
3863 * mpw-make.in: Remove.
3864 * mpw-make.sed: New file, used by mpw-configure to edit
3865 Makefile.in into an MPW makefile.
3867 Wed Sep 20 12:55:28 1995 Ian Lance Taylor <ian@cygnus.com>
3869 * Makefile.in (maintainer-clean): New synonym for realclean.
3871 Tue Sep 19 15:28:36 1995 Ian Lance Taylor <ian@cygnus.com>
3873 * m68k-opc.c: Split pmove patterns which use 'P' into patterns
3874 which use '0', '1', and '2' instead. Specify the proper size for
3875 a pmove immediate operand. Correct the pmovefd patterns to be
3876 moves to a register, not from a register.
3877 * m68k-dis.c (print_insn_arg): Replace 'P' with '0', '1', '2'.
3879 Thu Sep 14 11:58:22 1995 Doug Evans <dje@canuck.cygnus.com>
3881 * sparc-opc.c (sparc_opcodes): Mark all insns that reference
3882 %psr, %wim, %tbr as F_NOTV9.
3884 Fri Sep 8 01:07:38 1995 Ian Lance Taylor <ian@cygnus.com>
3886 * Makefile.in (Makefile): Just rebuild Makefile when running
3888 (config.h, stamp-h): New targets.
3889 * configure.in: Call AC_CONFIG_HEADER and AC_CANONICAL_SYSTEM
3890 earlier. Don't bother to call AC_ARG_PROGRAM. Touch stamp-h when
3891 rebuilding config.h.
3892 * configure: Rebuild.
3894 * mips-opc.c: Change unaligned loads and stores with "t,A"
3895 operands to use "t,A(b)".
3897 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3899 * sh-dis.c (print_insn_shx): Add F_FR0 support.
3901 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3903 * sh-dis.c (print_insn_shx): Change loop over op->arg[n] to iterate
3904 until 3 instead of until 2.
3906 Wed Sep 6 21:21:33 1995 Ian Lance Taylor <ian@cygnus.com>
3908 * Makefile.in (ALL_CFLAGS): Define.
3909 (.c.o, disassemble.o): Use $(ALL_CFLAGS).
3910 (MOSTLYCLEAN): Add config.log.
3911 (distclean): Don't remove config.log.
3912 * configure.in: Substitute HDEFINES.
3913 * configure: Rebuild.
3915 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3917 * sh-opc.h (sh_arg_type): Add F_FR0.
3918 (sh_table, case fmac): Add F_FR0 as first argument.
3920 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3922 * sh-opc.h (sh_opcode_info): Increase arg array size to 4.
3924 Tue Sep 5 18:28:10 1995 Doug Evans <dje@canuck.cygnus.com>
3926 * sparc-dis.c: Remove all references to NO_V9.
3928 Tue Sep 5 20:03:26 1995 Ian Lance Taylor <ian@cygnus.com>
3930 * aclocal.m4: Just include ../bfd/aclocal.m4.
3931 * configure: Rebuild.
3933 Tue Sep 5 16:09:59 1995 Doug Evans <dje@canuck.cygnus.com>
3935 * sparc-dis.c (X_DISP19): Define.
3936 (print_insn, case 'G'): Use it.
3937 (print_insn, case 'L'): Sign extend displacement.
3939 Mon Sep 4 14:28:46 1995 Ian Lance Taylor <ian@cygnus.com>
3941 * configure.in: Run ../bfd/configure.host before AC_PROG_CC.
3942 Subsitute CFLAGS and AR. Call AC_PROG_INSTALL. Don't substitute
3943 host_makefile_frag or frags.
3944 * aclocal.m4: New file.
3945 * configure: Rebuild.
3946 * Makefile.in (INSTALL): Set to @INSTALL@.
3947 (INSTALL_PROGRAM): Set to @INSTALL_PROGRAM@.
3948 (INSTALL_DATA): Set to @INSTALL_DATA@.
3950 (AR_FLAGS): Set to rc rather than qc.
3951 (CC): Define as @CC@.
3952 (CFLAGS): Set to @CFLAGS@.
3953 (@host_makefile_frag@): Remove.
3954 (config.status): Remove dependency upon @frags@.
3956 * configure.in: ../bfd/config.bfd now just sets shell variables.
3957 Use them rather than looking through target Makefile fragments.
3958 * configure: Rebuild.
3960 Thu Aug 31 12:35:32 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3962 * sh-opc.h (ftrc): Change FPUL_N to FPUL_M.
3964 Wed Aug 30 13:52:28 1995 Doug Evans <dje@canuck.cygnus.com>
3966 * sparc-opc.c (sparc_opcodes): Delete duplicate wr %y insn.
3967 Add clrx, iprefetch, signx, clruw, cas, casl, casx, casxl synthetic
3970 * sparc-opc.c (sparc_opcodes): Fix prefetcha insn.
3971 (lookup_{name,value}): New functions.
3972 (prefetch_table): New static local.
3973 (sparc_{encode,decode}_prefetch): New functions.
3974 * sparc-dis.c (print_insn): Handle '*' arg (prefetch function).
3976 Wed Aug 30 11:11:58 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3978 * sh-opc.h: Add blank lines to improve readabililty of sh3e
3981 Wed Aug 30 11:09:38 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3983 * sh-dis.c: Correct comment on first line of file.
3985 Tue Aug 29 15:37:18 1995 Doug Evans <dje@canuck.cygnus.com>
3987 * disassemble.c (disassembler): Handle bfd_mach_sparc64.
3989 * sparc-opc.c (asi, membar): New static locals.
3990 (sparc_{encode,decode}_{asi,membar}): New functions.
3991 (sparc_opcodes, membar insn): Fix.
3992 * sparc-dis.c (print_insn): Call sparc_decode_asi.
3993 Support decoding of membar masks.
3996 Sat Aug 26 21:22:48 1995 Ian Lance Taylor <ian@cygnus.com>
3998 * m68k-opc.c (m68k_opcode_aliases): Add br, brs, brb, brw, brl.
4000 Mon Aug 21 17:33:36 1995 Ian Lance Taylor <ian@cygnus.com>
4002 * m68k-opc.c (m68k_opcode_aliases): Add bhib as an alias for bhis,
4003 and likewise for the other branches. Add bhs as an alias for bcc,
4004 and likewise for the size variants. Add dbhs as an alias for
4007 Fri Aug 11 13:40:24 1995 Jeff Law (law@snake.cs.utah.edu)
4009 * sh-opc.h (FP sts instructions): Update to match reality.
4011 Mon Aug 7 16:12:58 1995 Ian Lance Taylor <ian@cygnus.com>
4013 * m68k-dis.c: (fpcr_names): Add % before all register names.
4014 (reg_names): Likewise.
4015 (print_insn_arg): Don't explicitly print % before register names.
4016 Add % before register names in static array names. In case 'r',
4017 print data registers as `@(Dn)', not `Dn@'. When printing a
4018 memory address, don't print @# before it.
4019 (print_indexed): Change base_disp and outer_disp from int to
4020 bfd_vma. Print using MIT syntax, not mutant invalid Motorola
4021 syntax. Sign extend 8 byte displacement correctly.
4022 (print_base): Print using MIT syntax. Print zpc when appropriate.
4023 Change parameter disp from int to bfd_vma.
4025 * m68k-opc.c (m68k_opcode_aliases): Add jsrl and jsrs as aliases
4028 Mon Aug 7 02:21:40 1995 Jeff Law (law@snake.cs.utah.edu)
4030 * sh-dis.c (print_insn_shx): Handle new operand types F_REG_N,
4031 F_REG_M, FPSCR_M, FPSCR_N, FPUL_M and FPUL_N.
4032 * sh-opc.h (sh_arg_type): Add new operand types.
4033 (sh_table): Add new opcodes from SH3E Floating Point ISA.
4035 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
4037 * Makefile.in (distclean): Remove generated file config.h.
4039 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
4041 * Makefile.in (distclean): Remove generated file config.h.
4043 Wed Aug 2 18:33:40 1995 Ian Lance Taylor <ian@cygnus.com>
4045 * m68k-opc.c: New file, holding tables from include/opcode/m68k.h.
4047 * m68k-dis.c: Remove BREAK_UP_BIG_DECL stuff.
4049 (print_insn_m68k): Change d to be const. Use m68k_numopcodes
4050 rather than numopcodes. Use m68k_opcodes rather than removed
4051 opcode function. Don't check F_ALIAS.
4052 (print_insn_arg): Change first parameter to be const char *.
4053 * Makefile.in (ALL_MACHINES): Add m68k-opc.o.
4054 (m68k-opc.o): New target.
4055 * configure.in: Build m68k-opc.o for bfd_m68k_arch.
4056 * configure: Rebuild.
4058 Wed Aug 2 08:23:38 1995 Doug Evans <dje@canuck.cygnus.com>
4060 * sparc-dis.c (HASH_SIZE, HASH_INSN): Define.
4061 (opcode_bits, opcode_hash_table): New variables.
4062 (opcodes_initialized): Renamed from opcodes_sorted.
4063 (build_hash_table): New function.
4064 (is_delayed_branch): Use hash table.
4065 (print_insn): Renamed from print_insn_sparc, made static.
4066 Build and use hash table. If !sparc64, ignore sparc64 insns,
4067 and vice-versa if sparc64.
4068 (print_insn_sparc, print_insn_sparc64): New functions.
4069 (compare_opcodes): Move sparc64 opcodes to end.
4070 Print commutative insns with constant second.
4071 * sparc-opc.c (all non-v9 insns): Use flag F_NOTV9 instead of F_ALIAS.
4073 Tue Aug 1 00:12:49 1995 Ian Lance Taylor <ian@cygnus.com>
4075 * sh-dis.c (print_insn_shx): Remove unused local dslot. Use
4076 print_address_func for A_BDISP12 and A_BDISP8. Correct test which
4077 avoids printing a delay slot in a delay slot.
4078 * sh-opc.h (sh_table): Fully bracket last entry.
4080 Mon Jul 31 12:04:47 1995 Doug Evans <dje@canuck.cygnus.com>
4082 * sparc-opc.c (sllx, srax, srlx): Fix disassembly.
4084 Wed Jul 12 00:59:34 1995 Ken Raeburn <raeburn@kr-pc.cygnus.com>
4086 * configure.in: Get host_makefile_frag from ${srcdir}.
4088 * configure.in: Autoconfiscated. Check for string[s].h. Create
4089 config.h from config.in. Don't set up sysdep.h link.
4090 * sysdep.h: New file.
4091 * configure, config.in: New files, generated from configure.in.
4092 * Makefile.in: Updated to be processed autoconf-style.
4093 (distclean): Keep sysdep.h. Remove config.log and config.cache.
4094 (Makefile): Depend on config.status.
4095 (config.status): New rule.
4096 * configure.bat: Update Makefile substitutions.
4098 Tue Jul 11 14:23:37 1995 Jeff Spiegel <jeffs@lsil.com>
4100 * mips-opc.c (L1): Define.
4101 (mips_opcodes): Add R4010 instructions: flushi, flushd, flushid,
4102 addciu, madd, maddu, ffc, ffs, msub, msubu, selsi, selsr, waiti,
4105 Tue Jul 11 11:49:49 1995 Ian Lance Taylor <ian@cygnus.com>
4107 * mips-opc.c (mips_opcodes): For the move pseudo-op, prefer daddu
4108 if ISA 3 and addu otherwise, replacing or, since some MIPS chips
4109 have multiple add units but only a single logical unit.
4111 * ppc-opc.c (powerpc_operands): Change CR to use a bitsize of 3,
4112 shifted by 18, without any insertion or extraction function.
4113 (insert_cr, extract_cr): Remove.
4115 Wed Jun 21 20:05:39 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4117 * m68k-dis.c (print_insn_arg, print_indexed): Print "%" before
4120 Thu Jun 15 17:23:31 1995 Stan Shebs <shebs@andros.cygnus.com>
4122 * mpw-config.in: Add sh and i386 configs, remove sparc config.
4123 * sh-opc.h: Add copyright.
4125 Mon Jun 5 03:30:43 1995 Ken Raeburn <raeburn@kr-laptop.cygnus.com>
4127 * Makefile.in (crunch-m68k): Delete extra target accidentally
4128 checked in a while ago.
4130 Wed May 24 16:22:13 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4132 * sh-opc.h (sh_table): Add SH3 support.
4134 Wed May 24 14:16:08 1995 Steve Chamberlain <sac@slash.cygnus.com>
4136 * sh-opc.h: Added bsrf and braf.
4138 Wed May 10 14:28:16 1995 Richard Earnshaw (rearnsha@armltd.co.uk)
4140 * arm-opc.h (arm_opcodes): Add 64-bit multiply patterns. Delete
4141 bogus [ls]fm{ea,fd} patterns.
4143 * arm-opc.h (arm_opcodes): Correct typos in stm, ldm, std, and ldc.
4144 * arm-dis.c (print_insn_arm): Make GIVEN a parameter, don't try and
4145 initialize it from memory. Make function static.
4146 (print_insn_{big,little}_arm): New functions.
4147 * disassemble.c (disassembler, case bfd_arch_arm): Disassemble for
4148 the correct endianness.
4150 Mon Apr 24 14:18:05 1995 Jason Molenda (crash@phydeaux.cygnus.com>
4152 * sh-opc.h (sh_nibble_type, sh_arg_type): remove trailing , from
4155 Wed Apr 19 14:07:03 1995 Michael Meissner <meissner@tiktok.cygnus.com>
4157 * m68k-dis.c (opcode): Finish change made by Kung Hsu on April
4158 17th, so that it builds again using GCC as the compiler.
4160 Tue Apr 18 12:14:51 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4162 * mips-dis.c (print_insn_little_mips): Cast return value from
4163 bfd_getl32 from bfd_vma to unsigned long, because _print_insn_mips
4164 expects an unsigned long, and that might be fewer words of
4165 argument storage (e.g., if bfd_vma is long long on a 32-bit
4167 (print_insn_big_mips): Likewise with bfd_getb32 value.
4168 (_print_insn_mips): Now static.
4170 Mon Apr 17 12:23:28 1995 Kung Hsu <kung@rtl.cygnus.com>
4172 * m68k-dis.c: Take out #define BREAK_UP_BIG_DECL kludge, because
4173 gcc memory hog problem with initializer is fixed.
4175 Mon Apr 10 15:55:01 1995 Stan Shebs <shebs@andros.cygnus.com>
4177 Merge in support for Mac MPW as a host.
4178 (Old change descriptions retained for informational value.)
4180 * mpw-config.in (archname): Compute from the config.
4181 (BFD_MACHINES, ARCHDEFS): Put into mk.tmp.
4183 * mpw-config.in (target_arch): Compute from canonical target.
4184 (m68k, mips, powerpc, sparc): Add architectures.
4185 * mpw-make.in (disassemble.c.o): Add.
4186 (ALL_CFLAGS): Remove special flags (-mc68020 -mc68881 -model far).
4188 * mpw-config.in (BFD_MACHINES): Set to a default value.
4189 * mpw-make.in (BFD_MACHINES): Remove wired-in value.
4191 * mpw-make.in (CSEARCH): Add extra-include to search path.
4193 * mpw-config.in (varargs.h): Don't create.
4194 (sysdep.h): Create using forward-include.
4195 * mpw-make.in (CSEARCH): Add include/mpw to search path.
4197 * mpw-config.in: New file, MPW version of configure.in.
4198 * mpw-make.in: New file, MPW version of Makefile.in.
4200 Fri Mar 31 14:23:38 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4202 * alpha-dis.c (print_insn_alpha): Put empty statement after
4205 Tue Mar 21 10:51:40 1995 Jeff Law (law@snake.cs.utah.edu)
4207 * hppa-dis.c (sign_extend): Delete, redundant with libhppa.h version.
4208 (low_sign_extend): Likewise.
4209 (get_field): Delete unused function.
4210 (set_field, deposit_14, deposit_21): Likewise.
4212 Fri Mar 17 15:55:53 1995 J.T. Conklin <jtc@rtl.cygnus.com>
4214 * i386-dis.c: Support for more pentium opcodes. From Guy Harris
4217 Tue Mar 14 00:52:57 1995 Ken Raeburn (raeburn@kr-pc.cygnus.com)
4219 Sat Feb 11 17:22:41 1995 Klaus Kaempf (kkaempf@didymus.rmi.de)
4221 * alpha-opc.h (OSF_ASMCODE): define
4222 print pal-code names as defined in App C of the
4223 Alpha Architecture Reference Manual
4225 * alpha-dis.c: cleaned up output
4226 print stylized code forms as defined in App A.4.3 of the
4227 Alpha Architecture Reference Manual
4229 Wed Mar 8 15:21:14 1995 Ian Lance Taylor <ian@cygnus.com>
4231 * mips-opc.c: Add new mips4 instructions. Don't set INSN_RFE for
4233 * mips-dis.c (print_insn_arg): Handle new argument types 'h', 'R',
4236 Wed Mar 8 02:54:05 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4238 * m68k-dis.c (opcode): New function. Returns address of opcode
4239 table entry given index, even if the opcode table was split to
4240 work around gcc bugs.
4241 (print_insn_m68k): Call opcode instead of referencing m68k_opcodes
4243 (BREAK_UP_BIG_DECL): Make secondary array static and const.
4244 (reg_names): Now const.
4245 (print_insn_arg): Arrays cacheFieldName and names now const.
4246 (print_indexed): Array scales now const.
4248 Tue Mar 7 16:41:21 1995 Ian Lance Taylor <ian@cygnus.com>
4250 * ppc-opc.c: Sort recently added instructions by minor opcode
4251 number within major opcode number.
4253 Mon Mar 6 10:04:36 1995 Jeff Law (law@snake.cs.utah.edu)
4255 * hppa-dis.c: Include libhppa.h.
4257 Fri Feb 24 19:15:36 1995 Ian Lance Taylor <ian@cygnus.com>
4259 * mips-opc.c: Change dli to use M_DLI, and add dla.
4261 Mon Feb 20 23:54:38 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4263 * Makefile.in (ALL_MACHINES): Add w65-dis.o.
4265 Thu Feb 16 17:34:41 1995 Ian Lance Taylor <ian@cygnus.com>
4267 * mips-opc.c: Add r4650 mul instruction.
4269 Wed Feb 15 15:45:20 1995 Ian Lance Taylor <ian@cygnus.com>
4271 * mips-opc.c: Add uld and usd macros for unaligned double load and
4274 Tue Feb 14 13:17:37 1995 Michael Meissner <meissner@tiktok.cygnus.com>
4276 * ppc-opc.c (powerpc_opcodes): Add 403GA opcodes rfci, dccci,
4277 mfdcr, mtdcr, icbt, iccci.
4279 Thu Feb 9 12:28:13 1995 Stan Shebs <shebs@andros.cygnus.com>
4281 * i960-dis.c (struct tabent, struct sparse_tabent): Change the
4282 signed char fields to shorts, more portable.
4284 Wed Feb 8 17:29:29 1995 Stan Shebs <shebs@andros.cygnus.com>
4286 * i960-dis.c (struct tabent, struct sparse_tabent): Declare the
4287 char fields as signed chars, since they may have negative values.
4289 Mon Feb 6 10:52:06 1995 J.T. Conklin <jtc@rtl.cygnus.com>
4291 * i386-dis.c (dis386_twobyte): Add cpuid, From Charles Hannum
4292 (mycroft@netbsd.org).
4294 Mon Jan 30 12:38:00 1995 Ian Lance Taylor <ian@cygnus.com>
4296 From "Logg, Ed" <elogg@ea.com>:
4297 * ppc-opc.c (extract_bdm): Correct parenthezisation.
4298 * ppc-dis.c (print_insn_powerpc): Print .long before unrecognized
4301 Thu Jan 26 18:32:08 1995 Ian Lance Taylor <ian@cygnus.com>
4303 * ppc-opc.c: Changes based on patch from David Edelsohn
4304 <edelsohn@mhpcc.edu>.
4305 (powerpc_operands): Add operands SPRBAT and SPRG. Split TBR out of
4308 (insert_tbr): New static function.
4309 (extract_tbr): New static function.
4310 (XFXFXM_MASK, XFXM): Define.
4311 (XSPRBAT_MASK, XSPRG_MASK): Define.
4312 (powerpc_opcodes): Add instructions to access special registers by
4313 name. Add mtcr and mftbu.
4315 Tue Jan 17 10:56:43 1995 Ian Lance Taylor <ian@sanguine.cygnus.com>
4317 * mips-opc.c (P3): Define.
4318 (mips_opcodes): Add mad and madu.
4320 Sun Jan 15 16:32:59 1995 Steve Chamberlain <sac@splat>
4322 * configure.in: Add W65 support.
4323 * disassemble.c: Likewise.
4324 * w65-opc.h, w65-dis.c: New files.
4326 Wed Dec 28 22:15:33 1994 Steve Chamberlain (sac@jonny.cygnus.com)
4328 * h8300-dis.c (bfd_h8_disassemble): Add support for 2 bit
4331 Tue Dec 20 11:25:12 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4333 * mips-opc.c: Add dli as a synonym for li.
4335 Thu Dec 8 18:23:31 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
4337 * alpha-dis.c (print_insn_alpha): Handle call_pal instruction, and
4338 print something for reserved opcode values, even if it won't
4341 * mips-dis.c (_print_insn_mips): When initializing, shift right
4342 and mask, to avoid sign extension problems on the Alpha.
4344 * m68k-dis.c (print_insn_arg, case 'J'): Handle buscr and pcr
4347 Wed Nov 23 22:34:51 1994 Steve Chamberlain (sac@jonny.cygnus.com)
4349 * sh-opc.h (mov.l gbr): Get direction right.
4350 * sh-dis.c (print_insn_shx): New function.
4351 (print_insn_shl, print_insn_sh): Call print_insn_shx to
4352 print opcodes with right byte order.
4354 Thu Nov 3 19:32:22 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
4356 * ns32k-dis.c (struct ns32k_option): Renamed from struct option,
4357 to avoid conflicts with getopt.
4359 Mon Oct 31 18:48:10 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4361 * hppa-dis.c (print_insn_hppa): Read the instruction using
4362 bfd_getb32, so that it works on a little endian or 64 bit host.
4363 Remove unused local variable op.
4365 Tue Oct 25 17:07:57 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4367 * mips-opc.c: Use or instead of addu for pseudo-op move, since
4368 addu does not work correctly if -mips3.
4370 Wed Oct 19 13:40:16 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4372 * a29k-dis.c (print_special): Add special register names defined
4373 on 29030, 29040 and 29050.
4374 (print_insn): Handle new operand type 'I'.
4376 Wed Oct 12 11:59:55 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4378 * Makefile.in (INSTALL): Use top level install.sh script.
4380 Wed Oct 5 19:16:29 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4382 * sparc-dis.c: Rewrite to use bitfields, rather than a union, so
4383 that it works on a little endian host.
4385 Tue Oct 4 12:14:21 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4387 * configure.in: Use ${config_shell} when running config.bfd.
4389 Wed Sep 21 18:49:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4391 * mips-opc.c (mips_opcodes): "dabs" is only available with -mips3.
4393 Thu Sep 15 16:30:22 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4395 * a29k-dis.c (print_insn): Print the opcode.
4397 Wed Sep 14 17:52:14 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4399 * mips-opc.c (mips_opcodes): Set WR_t for sc and scd.
4401 Sun Sep 11 22:32:17 1994 Jeff Law (law@snake.cs.utah.edu)
4403 * hppa-dis.c (reg_names): Use r26-r23 for arg0-arg3.
4405 Tue Sep 6 11:37:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4407 * mips-opc.c: Set INSN_STORE_MEMORY flag for all instructions
4408 which store a value into memory.
4410 Sun Sep 04 17:58:10 1994 Richard Earnshaw (rwe@pegasus.esprit.ec.org)
4412 * configure.in, Makefile.in, disassemble.c: Add support for the ARM.
4413 * arm-dis.c, arm-opc.h: New files.
4415 Fri Aug 5 14:00:05 1994 Stan Shebs (shebs@andros.cygnus.com)
4417 * Makefile.in (ns32k-dis.o): Add dependency.
4418 * ns32k-dis.c (print_insn_arg): Declare initialized local as
4419 string, not as array of chars.
4421 Thu Jul 28 18:14:16 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4423 * sparc-dis.c (print_insn_sparc): Handle new operand type 'x'.
4425 * sparc-opc.c: Added sparclite extended FP operations, and
4426 versions of v9 impdep* instructions permitting specification of
4429 Tue Jul 26 16:36:03 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4431 * i960-dis.c (reg_names): Now const.
4432 (struct sparse_tabent): New type, copied from array type in mem
4434 (ctrl): Local static array ctrl_tab now const.
4435 (cobr): Local static array cobr_tab now const.
4436 (mem): Local variables reg1, reg2, reg3 now point to const. Local
4437 static variable mem_tab no longer explicitly initialized. Changed
4438 mem_init to const array of struct sparse_tabent.
4439 (reg): Local static variable reg_tab no longer explicitly
4440 initialized. Changed reg_init to const array of struct
4442 (ea): Local static array scale_tab now const.
4444 * i960-dis.c (reg): Added i960JX instructions to reg_init table.
4447 Tue Jul 19 21:00:00 1994 DJ Delorie (dj@ctron.com)
4449 * configure.bat: the disassember needs to be enabled for
4450 "objdump -d" to work in djgpp.
4452 Wed Jul 13 18:01:58 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4454 * ns32k-dis.c: Deleted all code in "#ifdef GDB".
4455 (invalid_float): Enabled general version, doesn't require running
4456 on ns32k host. Changed to take char* argument, and test for
4457 explicitly specified sizes, instead of using sizeof() on host CPU
4459 (INVALID_FLOAT): Cast first argument.
4460 (opt_u, opt_U, opt_O, opt_C, opt_S, list_P532, list_M532,
4461 list_P032, list_M032): Now const.
4462 (optlist, list_search): Made appropriate arguments now point to
4464 (print_insn_arg): Changed static array of one-character-string
4465 pointers into a static const array of characters; fixed sprintf
4466 statement accordingly.
4468 Sun Jul 10 00:27:47 1994 Ian Dall (dall@hfrd.dsto.gov.au)
4470 * opcodes/ns32k-dis.c: Semi-new file. Had apparently been dropped
4471 from distribution. A ns32k-dis.c from a previous distribution has
4472 been brought up to date and supports the new interface.
4474 * disassemble.c: define ARCH_ns32k and add case bfd_arch_ns32k.
4476 * configure.in: add bfd_ns32k_arch target support.
4478 * Makefile.in: add ns32k-dis.o to ALL_MACHINES.
4479 Add ns32k-dis.c to CFILES. Add dependencies for ns32k-dis.o.
4481 Wed Jun 29 22:10:37 1994 Steve Chamberlain (sac@cygnus.com)
4483 * h8300-dis.c (bfd_h8_disassemble): Get 16bit branch
4486 Tue Jun 28 13:22:06 1994 Stan Shebs (shebs@andros.cygnus.com)
4488 * h8300-dis.c, mips-dis.c: Don't use true and false.
4490 Thu Jun 23 12:53:19 1994 David J. Mackenzie (djm@rtl.cygnus.com)
4492 * configure.in: Change --with-targets to --enable-targets.
4494 Wed Jun 22 13:38:32 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4496 * mips-dis.c (_print_insn_mips): Build a static hash table mapping
4497 opcodes to the first instruction with that opcode, to speed
4498 disassembly of large files. From ralphc@pyramid.com (Ralph
4501 Tue Jun 7 12:49:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4503 * Makefile.in (mostlyclean): Fix typo (was mostyclean).
4505 Wed May 11 22:32:00 1994 DJ Delorie (dj@ctron.com)
4507 * configure.bat: update to latest makefile.in
4509 Sat May 7 17:13:21 1994 Steve Chamberlain (sac@cygnus.com)
4511 * a29k-dis.c (print_insn): Print 'x' type operand in hex.
4512 * h8300-dis.c (bfd_h8_disassemble): Print 16bit rels correctly.
4513 * sh-dis.c (print_insn_sh): Don't recur endlessly if delay
4514 slot insn is in a delay slot.
4515 * z8k-opc.h: (resflg): Fix patterns.
4516 * h8500-opc.h Fix CR insn patterns.
4518 Fri May 6 14:34:46 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4520 * ppc-opc.c (powerpc_opcodes): Put PowerPC versions of "cmp" and
4521 "cmpl" before POWER versions, so that gas -many uses them.
4523 Thu Apr 28 18:32:36 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4525 * disassemble.c: New file.
4526 * Makefile.in (OFILES): Add disassemble.o.
4527 (disassemble.o): Provide dependencies; compile with $(ARCHDEFS).
4528 * configure.in: Define ARCHDEFS in Makefile. Code taken from
4529 binutils/configure.in.
4531 * m68k-dis.c (print_insn_m68k): If F_ALIAS flag is set, skip the
4532 opcode being examined.
4534 Thu Apr 21 17:08:40 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4536 * ppc-opc.c (powerpc_operands): Added RAL, RAM and RAS.
4537 (insert_ral, insert_ram, insert_ras): New functions.
4538 (powerpc_opcodes): Use RAL for load with update, RAM for lmw, and
4539 RAS for store with update.
4541 Sat Apr 16 23:41:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4543 * ppc-opc.c (powerpc_opcodes): Correct fcir. From David Edelsohn
4544 (edelsohn@npac.syr.edu).
4546 Wed Apr 6 17:11:45 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4548 * mips-opc.c (mips_opcodes): Correct operands of "nor" with an
4551 Mon Apr 4 16:30:46 1994 Doug Evans (dje@canuck.cygnus.com)
4553 * sparc-opc.c (sparc_opcodes): Fix "rd %fprs,%l0".
4555 Mon Apr 4 13:22:00 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4557 * ppc-opc.c (powerpc_operands): The signedp field has been
4558 removed, so don't initialize it. Set the PPC_OPERAND_SIGNED flag
4559 instead. Add new operand SISIGNOPT.
4560 (powerpc_opcodes): For lis, liu, addis, and cau use SISIGNOPT.
4561 Based on patch from David Edelsohn (edelsohn@npac.syr.edu).
4562 * ppc-dis.c (print_insn_powerpc): Check PPC_OPERAND_SIGNED rather
4565 Wed Mar 30 00:31:49 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4567 * i386-dis.c (struct private): Renamed to dis_private. `private'
4568 is a reserved word for dynix cc.
4570 Mon Mar 28 13:00:15 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4572 * configure.in: Change error message to refer to bfd/config.bfd
4573 rather than bfd/configure.in.
4575 Mon Mar 28 12:28:30 1994 David Edelsohn (edelsohn@npac.syr.edu)
4577 * ppc-opc.c: Define POWER2 as short alias flag.
4578 (powerpc_opcodes): Add POWER/2 opcodes lfq*, stfq*, fcir[z], and
4581 Wed Mar 23 12:23:05 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4583 * i960-dis.c (print_insn_i960): Don't read a second word for
4584 opcodes 0, 1, 2 and 3.
4586 Wed Mar 16 15:37:58 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4588 * configure.in: Don't build m68881-ext.o for bfd_m68k_arch.
4590 Mon Mar 14 14:53:50 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4592 * m68881-ext.c: Removed; no longer used.
4593 * Makefile.in: Changed accordingly.
4595 * m68k-dis.c (ext_format_68881): Don't declare.
4596 (print_insn_m68k): If an instruction uses place 'i', it uses at
4597 least four fixed bytes.
4598 (print_insn_arg): Don't bump p by 2 for case 'I', place 'i'. For
4599 extended float, convert to double using floatformat_to_double, not
4600 ieee_extended_to_double, and fetch the data before converting it.
4602 Tue Mar 8 18:12:25 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4604 * mips-opc.c: It's sqrt.s, not sqrt.w. From
4605 davidj@ICSI.Berkeley.EDU (David Johnson).
4607 Tue Feb 8 16:55:27 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4609 * ppc-opc.c (powerpc_opcodes): The POWER uses bdn[l][a] where the
4610 PowerPC uses bdnz[l][a].
4612 Tue Feb 8 00:32:28 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4614 * dis-buf.c, i386-dis.c: Include sysdep.h.
4616 Mon Feb 7 19:22:23 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4618 * configure.in (bfd_powerpc_arch): Use ppc-dis.o and ppc-opc.o.
4620 * ppc-opc.c (powerpc_opcodes): Mark POWER instructions supported
4621 by Motorola PowerPC 601 with PPC_OPCODE_601.
4622 * ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc):
4623 Disassemble Motorola PowerPC 601 instructions as well as normal
4624 PowerPC instructions.
4626 Sun Feb 6 07:45:17 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
4628 * i960-dis.c (reg, mem): Just use a static array instead of
4631 Sat Feb 5 00:04:02 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
4633 * hppa-dis.c (print_insn_hppa): For '?' and '@' only adjust the
4634 condition name index if this is for a negated condition.
4636 * hppa-dis.c (print_insn_hppa): No space before 'H' operand.
4637 Floating point format for 'H' operand is backwards from normal
4638 case (0 == double, 1 == single). For '4', '6', '7', '9', and '8'
4639 operands (fmpyadd and fmpysub), handle bizarre register
4640 translation correctly for single precision format.
4642 * hppa-dis.c (print_insn_hppa): Do not emit a space after 'F'
4643 or 'I' operands if the next format specifier is 'M' (fcmp
4644 condition completer).
4646 Feb 4 23:38:03 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4648 * ppc-opc.c (powerpc_operands): New operand type MBE to handle a
4649 single number giving a bitmask for the MB and ME fields of an M
4650 form instruction. Change NB to accept 32, and turn it into 0;
4651 also turn 0 into 32 when disassembling. Seperated SH from NB.
4652 (insert_mbe, extract_mbe): New functions.
4653 (insert_nb, extract_nb): New functions.
4654 (SC_MASK): Mask out SA and LK bits.
4655 (powerpc_opcodes): Change "cal" to use RT, D, RA rather than RT,
4656 RA, SI. Change "liu" and "cau" to use UI rather than SI. Mark
4657 "bctr" and "bctrl" as accepted by POWER. Change "rlwimi",
4658 "rlimi", "rlwimi.", "rlimi.", "rlwinm", "rlinm", "rlwinm.",
4659 "rlinm.", "rlmi", "rlmi.", "rlwnm", "rlnm", "rlwnm.", "rlnm." to
4660 use MBE rather than MB. Add "mfmq" and "mtmq" POWER instructions.
4661 (powerpc_macros): Define table of macro definitions.
4662 (powerpc_num_macros): Define.
4664 * ppc-dis.c (print_insn_powerpc): Don't skip optional operands
4665 if PPC_OPERAND_NEXT is set.
4667 Sat Jan 22 23:10:07 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4669 * i960-dis.c (print_insn_i960): Make buffer bfd_byte instead of
4670 char. Retrieve contents using bfd_getl32 instead of shifting.
4672 Fri Jan 21 19:01:39 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4674 * ppc-opc.c: New file. Opcode table for PowerPC, including
4675 opcodes for POWER (RS/6000).
4676 * ppc-dis.c: New file. PowerPC and Power (RS/6000) disassembler.
4677 * Makefile.in (ALL_MACHINES): Add ppc-dis.o and ppc-opc.o.
4678 (CFILES): Add ppc-dis.c.
4679 (ppc-dis.o, ppc-opc.o): New targets.
4680 * configure.in: Build ppc-dis.o and ppc-opc.o for bfd_rs6000_arch.
4682 Mon Jan 17 20:05:49 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
4684 * hppa-dis.c (print_insn_hppa): Handle 'N' in assembler template.
4685 No space before 'u', 'f', or 'N'.
4687 Sun Jan 16 14:20:16 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
4689 * i386-dis.c (print_insn_i386): Add FIXME comment regarding reading
4690 farther than we should.
4692 * i386-dis.c (dis386): Use Yb and Yv for scasb and scasS.
4694 Thu Jan 6 12:38:05 1994 David J. Mackenzie (djm@thepub.cygnus.com)
4696 * sparc-dis.c m68k-dis.c alpha-dis.c a29k-dis.c: Fix comments.
4698 Wed Jan 5 11:56:21 1994 David J. Mackenzie (djm@thepub.cygnus.com)
4700 * i960-dis.c (print_insn_i960): Only read word2 if the instruction
4701 needs it, to prevent reading past the end of a section.
4703 Wed Nov 17 17:20:12 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4705 * mips-opc.h: Use macro for j instruction, to support SVR4 PIC.
4706 Removed t,A case for la; always use t,A(b) case.
4708 Mon Nov 8 12:37:36 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4710 From Ted Lemen <mellon@pepper.ncd.com>
4711 * mips-dis.c (print_insn_arg): Handle 'k'.
4712 * mips-opc.c: Make cache use k, not t.
4714 Sun Nov 7 23:52:34 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4716 * alpha-opc.h, alpha-dis.c (print_insn_alpha): Add
4717 FLOAT_MEMORY_FORMAT_CODE, FLOAT_BRANCH_FORMAT_CODE, correct
4718 FLOAT_FORMAT_CODE to put out floating point register names.
4720 Mon Nov 1 18:17:51 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4722 * mips-opc.c: Use macros for jal variants, to support SVR4 PIC.
4724 Thu Oct 28 17:42:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4726 * a29k-dis.c (print_insn): Use 0x%08x, not 0x%8x.
4728 Wed Oct 27 11:48:01 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4730 * mips-opc.c (dsll, dsra, dsrl): Added '>' cases for shift counts
4731 larger than 32. Moved dsxx32 variants first for disassembler.
4733 Mon Oct 25 11:33:14 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
4735 * z8kgen.c, z8k-opc.h: Add full lda information.
4737 Tue Oct 19 12:39:25 1993 Jeffrey A Law (law@cs.utah.edu)
4739 * hppa-dis.c (print_insn_hppa): Do not emit a space after
4740 movb instructions. Any necessary space will be emitted by
4741 the code to handle nullification completers.
4743 Wed Oct 13 16:19:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4745 * mips-opc.c: Moved l.d down so that it disassembles as ldc1.
4747 Fri Oct 8 02:34:21 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4749 * alpha-opc.h: Add ldl_l, fix typo for ldq_u.
4750 * alpha-dis.c (print_insn_alpha): Add code for PAL_FORMAT_CODE.
4752 Tue Oct 5 17:47:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4754 * mips-opc.c: Correct lwu opcode value (book had it wrong).
4756 Thu Sep 30 11:26:18 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
4758 * z8k-dis.c (FETCH_DATA): get just the right amount of data.
4759 (unpack_instr): Cope with ARG_IMM4M1 type instructions.
4761 Wed Sep 29 16:24:49 1993 K. Richard Pixley (rich@sendai.cygnus.com)
4763 * m88k-dis.c (m88kdis): comment change. Remove space after
4765 (printop): handle new arg types DEC and XREG for m88110.
4767 Tue Sep 28 19:20:16 1993 Jeffrey A Law (law@snake.cs.utah.edu)
4769 * hppa-dis.c (print_insn_hppa): Handle 'z' operand
4770 type for absolute branch addresses. Delete special
4771 "ble" and "be" code in 'W' operand code.
4773 Fri Sep 24 14:08:33 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4775 * mips-opc.c: Set hazard information correctly for branch
4776 likely instructions.
4778 Fri Sep 17 04:41:17 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4780 * alpha-dis.c (print_insn_alpha), alpha-opc.h: Fix bugs, use
4781 info->fprintf_func for printing and info->print_address_func for
4784 Wed Sep 15 12:12:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4786 * mips-opc.c: Set INSN_TRAP for tXX instructions.
4788 Thu Sep 9 10:11:27 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4790 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson):
4791 Corrected second case of "b" for disassembler.
4793 Tue Sep 7 14:25:15 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4795 * mips-dis.c, m88k-dis.c: Don't include libbfd.h. Changed calls
4796 to BFD swapping routines to correspond to BFD name changes.
4798 Thu Sep 2 10:35:25 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4800 * mips-opc.c: Change div machine instruction to be z,s,t rather
4801 than s,t. Change div macro to be d,v,t rather than d,s,t.
4802 Likewise for divu, ddiv, ddivu. Added z,s,t case for drem, dremu,
4803 rem and remu which generates only the corresponding div
4804 instruction. This is for compatibility with the MIPS assembler,
4805 which only generates the simple machine instruction when an
4806 explicit destination of $0 is used.
4807 * mips-dis.c (print_insn_arg): Handle 'z' (always register zero).
4809 Thu Aug 26 17:41:44 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4811 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Set
4812 WR_31 hazard for bal, bgezal, bltzal.
4814 Thu Aug 26 17:20:02 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4816 * hppa-dis.c (print_insn_hppa): Use print function
4817 from within the disassemble_info, not fprintf_filtered.
4819 Wed Aug 25 13:51:40 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
4821 * hppa-dis.c (print_insn_hppa): Handle '|' like '>'. (From Jeff
4822 Law, law@cs.utah.edu.)
4824 Mon Aug 23 12:44:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4826 * mips-opc.c ("absu"): Removed.
4829 Fri Aug 20 10:52:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4831 * mips-opc.c: Added r6000 and r4000 instructions and macros.
4832 Changed hazard information to distinguish between memory load
4833 delays and coprocessor load delays.
4835 Wed Aug 18 15:39:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4837 * mips-opc.c: li.d uses "T,L", not "S,F". Added li.s.
4839 Tue Aug 17 09:44:42 1993 David J. Mackenzie (djm@thepub.cygnus.com)
4841 * configure.in: Don't pass cpu to config.bfd.
4843 Tue Aug 17 12:23:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4845 * m88k-dis.c (m88kdis): Make class unsigned.
4847 Thu Aug 12 15:08:18 1993 Ian Lance Taylor (ian@cygnus.com)
4849 * alpha-dis.c (print_insn_alpha): One branch format case was
4850 missing the instruction name.
4852 Wed Aug 11 19:29:39 1993 David J. Mackenzie (djm@thepub.cygnus.com)
4854 * Makefile.in (ALL_MACHINES): Renamed from DIS_LIBS.
4855 Add the arch-specific auxiliary files.
4856 (OFILES): Remove the arch-specific auxiliary files
4857 and use BFD_MACHINES instead of DIS_LIBS.
4858 * configure.in: Set BFD_MACHINES based on --with-targets option.
4860 Thu Aug 12 12:04:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4862 * mips-opc.c: Added lwc1 E,A(b) to go with lwc1 T,A(b). Similarly
4865 Sun Aug 8 15:09:30 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4867 * sparc-opc.c: Change CONST to const to deal with gcc
4868 -Dconst=__const -traditional.
4870 Fri Aug 6 10:58:55 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4872 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Took
4873 coprocessor instructions out of #if 0, and made them use new
4876 Thu Aug 5 17:11:06 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4878 * sparc-dis.c: Include ansidecl.h before opcodes/sparc.h.
4880 Fri Jul 30 18:48:15 1993 John Gilmore (gnu@cygnus.com)
4882 * sparc-opc.c: Add F_JSR, F_UNBR, or F_CONDBR flags to each branch
4883 instruction, for use by the disassembler.
4885 * sparc-dis.c (SEX): Add sign extension macro. Replace many
4886 hand-coded sign extensions that depended on 32-bit host ints.
4887 FIXME, we still depend on big-endian host bitfield ordering.
4888 (sparc_print_insn): Set the insn_info_valid field, and the
4889 other fields that describe the instruction being printed.
4891 Tue Jul 27 17:04:58 1993 Jim Wilson (wilson@sphagnum.cygnus.com)
4893 * sparc-opc.c (call): Accept all 6 addressing modes valid for
4894 `jmp' instead of just one of them.
4896 Wed Jul 21 11:43:32 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
4898 * hppa-dis.c: Move floating registers from reg_names to fp_reg_names.
4899 (fput_fp_reg_r): Renamed from fput_reg_r.
4900 (fput_fp_reg): New function.
4901 (print_insn_hppa): Use fput_fp_reg{,_r} where appropriate.
4903 * hppa-dis.c (print_insn_hppa, cases 'a', 'd'): Print space afterwards.
4905 * hppa-dis.c (print_insn_hppa, case 'd'): Use GET_COND not GET_FIELD.
4907 Mon Jul 19 13:52:21 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
4909 * hppa-dis.c (print_insn_hppa): Use extract_5r_store for 'r'.
4911 * hppa-dis.c (print_insn_hppa, case '>'): If next character is 'n',
4912 don't output a space.
4914 * hppa-dis.c (float_format_names): 10 is undefined, and 11 is quad.
4916 Sun Jul 18 16:30:02 1993 Jim Kingdon (kingdon@rtl.cygnus.com)
4918 * mips-opc.c: New file, containing opcode table from
4919 ../include/opcode/mips.h.
4920 * Makefile.in: Add it.
4922 Thu Jul 15 12:37:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4924 * m88k-dis.c: New file, moved in from gdb and changed to use the
4925 new dis-asm.h disassembler interface.
4926 * Makefile.in (DIS_LIBS): Added m88k-dis.o.
4927 (m88k-dis.o): New target.
4929 Tue Jul 13 10:04:16 1993 Ian Lance Taylor (ian@cygnus.com)
4931 * mips-dis.c (print_insn_arg, _print_insn_mips): Made pointer to
4932 argument string const char * to correspond to opcode/mips.h.
4934 Tue Jul 6 15:18:37 1993 Ian Lance Taylor (ian@cygnus.com)
4936 * mips-dis.c: Updated to account for name changes in new version
4938 * Makefile.in: Added header file dependencies.
4940 Sat Jul 3 23:47:56 1993 Doug Evans (dje@canuck.cygnus.com)
4942 * h8300-dis.c (bfd_h8_disassemble): Correct fetching of instruction.
4944 Thu Jul 1 12:23:38 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4946 * m68k-dis.c (NEXTWORD, NEXTLONG): Use ((x) ^ 0x8000) - 0x8000 to sign
4947 extend, rather than shifts.
4949 Sun Jun 20 20:56:56 1993 Ken Raeburn (raeburn@poseidon.cygnus.com)
4951 * Makefile.in: Undo 15 June change.
4953 Fri Jun 18 14:15:15 1993 Per Bothner (bothner@deneb.cygnus.com)
4955 * m68k-dis.c (print_insn_arg): Change return value to byte count
4957 * m68k-dis.c: Re-write to detect invalid operands before
4958 printing anything, so we can handle this the same way we
4959 handle invalid opcodes.
4961 Thu Jun 17 15:01:36 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
4963 * sh-dis.c, sh-opc.h: Understand some more opcodes.
4965 Wed Jun 16 13:48:05 1993 Ian Lance Taylor (ian@cygnus.com)
4967 * hppa-dis.c: Include <ansidecl.h> and sysdep.h before other
4970 Tue Jun 15 21:45:26 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
4972 * sparc-dis.c: Don't declare qsort, since sysdep.h might.
4974 * configure.in: Do make sysdep.h link.
4975 * Makefile.in: Search ../include. Don't search ../bfd.
4977 Tue Jun 15 13:36:10 1993 Stu Grossman (grossman@cygnus.com)
4979 Changes from Jeff Law, law@cs.utah.edu:
4980 * hppa-dis.c: Fix typo. 'a' and 'd' were reversed.
4981 Do not print a space before the completers specified by
4984 Fri Jun 11 18:40:21 1993 Ken Raeburn (raeburn@cygnus.com)
4986 * mips-dis.c: No longer need to bomb out if HOST_64_BIT is
4987 defined, since gdb has been fixed.
4989 Changes from Jeff Law, law@cs.utah.edu:
4990 * hppa-dis.c (print_insn_hppa): Last argument to fput_reg,
4991 fput_reg_r, fput_creg, fput_const, and fputs_filtered should
4992 be a *disassemble_info, not a *FILE.
4993 * hppa-dis.c: Support 'd', '!', and 'a'.
4994 * hppa-dis.c: Support 's' to extract a 2 bit space register.
4995 * hppa-dis.c: Delete cases which are no longer needed.
4997 Fri Jun 11 07:53:48 1993 Jim Kingdon (kingdon@cygnus.com)
4999 * m68k-dis.c (print_insn_{m68k,arg}): Add MMU codes.
5001 Tue Jun 8 12:25:01 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
5003 * h8300-dis.c: New file, removed from bfd/cpu-h8300.c, with
5006 Mon Jun 7 12:58:49 1993 Per Bothner (bothner@rtl.cygnus.com)
5008 * Makefile.in (CSEARCH): Add -I../bfd for sysdep.h and bfd.h.
5009 * configure.in: No longer need to configure to get sysdep.h.
5011 Thu Jun 3 15:56:49 1993 Stu Grossman (grossman@cygnus.com)
5013 * Patches from Jeffrey Law <law@cs.utah.edu>.
5014 * hppa-dis.c: Support 'I', 'J', and 'K' in output
5015 templates for 1.1 FP computational instructions.
5017 Tue May 25 13:05:48 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5019 * h8500-dis.c (print_insn_h8500): Address argument is type
5021 * z8k-dis.c (print_insn_z8k, print_insn_z8001, print_insn_z8002):
5024 * h8500-opc.h (addr_class_type): No comma at end of enumerator.
5025 * sh-opc.h (sh_nibble_type, sh_arg_type): Ditto.
5027 * sparc-dis.c (compare_opcodes): Move static declaration to
5030 Fri May 21 14:17:37 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
5032 * sparc-dis.c (print_insn_sparc): Implement 'n' argument for unimp
5033 instruction, remove unimp hack from 'l' argument.
5035 Wed May 19 15:35:54 1993 Stu Grossman (grossman@cygnus.com)
5037 * z8k-dis.c (fetch_data): Use unsigned char to make ancient gcc's
5040 Fri May 14 15:22:46 1993 Ian Lance Taylor (ian@cygnus.com)
5042 * Based on patches from davidj@ICSI.Berkeley.EDU (David Johnson):
5043 * mips-dis.c (print_insn_arg): Handle 'C' for general coprocessor
5046 Fri May 14 00:09:14 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5048 * hppa-dis.c: Include dis-asm.h before sysdep.h. Changed some
5049 arrays of string pointers to 2-d arrays of chars, to save
5052 Thu May 6 20:51:17 1993 Fred Fish (fnf@cygnus.com)
5054 * a29k-dis.c, alpha-dis.c, i960-dis.c, sparc-dis.c, z8k-dis.c:
5055 Cast second arg to read_memory_func to "bfd_byte *", as necessary.
5057 Tue May 4 20:31:10 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5059 * hppa-dis.c: New file from Utah, adapted to new disassembler
5061 * Makefile.in: Include it.
5063 Mon Apr 26 18:17:42 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5065 * sh-dis.c, sh-opc.h: New files.
5067 Fri Apr 23 18:51:22 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5069 * alpha-dis.c, alpha-opc.h: New files.
5071 Tue Apr 6 12:54:08 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
5073 * mips-dis.c: Sign extend 'j' and 'b' arguments, delta is a signed
5076 Mon Apr 5 17:37:37 1993 John Gilmore (gnu@cygnus.com)
5078 * sparc-dis.c: Make "ta" the default trap instruction, "t" the alias.
5080 Fri Apr 2 07:24:27 1993 Ian Lance Taylor (ian@cygnus.com)
5082 * a29k-dis.c, sparc-dis.c, sparc-opc.c: Use CONST rather than
5085 Thu Apr 1 11:20:43 1993 Jim Kingdon (kingdon@cygnus.com)
5087 * sparc-dis.c: Use fprintf_func a few places where I forgot,
5088 and double percent signs a few places.
5090 * a29k-dis.c, i960-dis.c: New, merged from gdb and binutils.
5092 * i386-dis.c, m68k-dis.c, mips-dis.c, sparc-dis.c:
5093 Use info->print_address_func not print_address.
5095 * dis-buf.c (generic_print_address): New function.
5097 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5099 * Makefile.in: Add sparc-dis.c.
5100 sparc-dis.c: New file, merges binutils and gdb versions as follows:
5102 Add `add' instruction to the set that get checked
5103 for a preceding `sethi' in order to print an absolute address.
5104 * (print_insn): Disassembly prefers real instructions.
5105 (is_delayed_branch): Speed up.
5106 * sparc-opcode.h: Add ALIAS bit to aliases. Fix up opcode tables.
5107 Still missing some float ops, and needs testing.
5108 * sparc-pinsn.c (print_insn): Eliminate 'set' test, subsumed by
5109 F_ALIAS. Use printf, not fprintf, when not passing a file
5111 (compare_opcodes): Check that identical instructions have
5112 identical opcodes, complain otherwise.
5115 * Include reg_names.
5117 Use dis-asm.h/read_memory_func interface.
5119 Wed Mar 31 20:49:06 1993 K. Richard Pixley (rich@rtl.cygnus.com)
5121 * h8500-dis.c, i386-dis.c, m68k-dis.c, z8k-dis.c (fetch_data):
5122 deliberately return non-zero to setjmp from longjmp. Otherwise
5123 this code fails to compile.
5125 Wed Mar 31 17:04:31 1993 Stu Grossman (grossman@cygnus.com)
5127 * m68k-dis.c: Fix prototype for fetch_arg().
5129 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5131 * dis-buf.c: New file, for new read_memory_func interface.
5132 Makefile.in (OFILES): Include it.
5133 m68k-dis.c, i386-dis.c, h8500-dis.c, mips-dis.c, z8k-dis.c:
5134 Use new read_memory_func interface.
5136 Mon Mar 29 14:02:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5138 * h8500-dis.c (print_insn_h8500): Get sign of fp offsets right.
5139 * h8500-opc.h: Fix couple of opcodes.
5141 Wed Mar 24 02:03:36 1993 david d `zoo' zuhn (zoo at poseidon.cygnus.com)
5143 * Makefile.in: add dvi & installcheck targets
5145 Mon Mar 22 18:55:04 1993 John Gilmore (gnu@cygnus.com)
5147 * Makefile.in: Update for h8500-dis.c.
5149 Fri Mar 19 14:27:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5151 * h8500-dis.c, h8500-opc.h: New files
5153 Thu Mar 18 14:12:37 1993 Per Bothner (bothner@rtl.cygnus.com)
5155 * mips-dis.c, z8k-dis.c: Converted to use interface defined in
5156 ../include/dis-asm.h.
5157 * m68k-dis.c: New file (merge of ../binutils/m68k-pinsn.c
5158 and ../gdb/m68k-pinsn.c).
5159 * i386-dis.c: New file (merge of ../binutils/i386-pinsn.c
5160 and ../gdb/i386-pinsn.c).
5161 * m68881-ext.c: New file. Moved definition of
5162 ext_format ext_format_68881 from ../gdb/m68k-tdep.c.
5163 * Makefile.in: Adjust for new files.
5164 * i386-dis.c: Patches from John Hassey (hassey@dg-rtp.dg.com).
5165 * m68k-dis.c: Recognize '9' placement code, so (say) pflush
5166 can be dis-assembled.
5168 Wed Feb 17 09:19:47 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5170 * mips-dis.c (print_insn_arg): Now returns void.
5172 Mon Jan 11 16:09:16 1993 Fred Fish (fnf@cygnus.com)
5174 * mips-dis.c (ansidecl.h): Include for benefit of sysdep.h
5175 files that use the macros.
5177 Thu Jan 7 13:15:17 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5179 * mips-dis.c: New file, from gdb/mips-pinsn.c.
5180 * Makefile.in (DIS_LIBS): Added mips-dis.o.
5181 (CFILES): Added mips-dis.c.
5183 Thu Jan 7 07:36:33 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5185 * z8k-dis.c (print_insn_z8001, print_insn_z8002): new routines
5186 * z8kgen.c, z8k-opc.h: fix sizes of some shifts.
5188 Tue Dec 22 15:42:44 1992 Per Bothner (bothner@rtl.cygnus.com)
5190 * Makefile.in: Improve *clean rules.
5191 * configure.in: Allow a default host.
5193 Tue Nov 17 19:53:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5195 * Makefile.in: also use -I$(srcdir)/../bfd, since some sysdep
5196 files include other sysdep files
5198 Thu Nov 12 16:10:37 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5200 * z8k-dis.c z8k-opc.h z8kgen.c: checkpoint
5202 Fri Oct 9 04:56:05 1992 John Gilmore (gnu@cygnus.com)
5204 * configure.in: For host support, use ../bfd/configure.host
5205 so it stays in sync with the ../bfd/hosts database.
5207 Thu Oct 1 23:38:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5209 * configure.in: use cpu-vendor-os triple instead of nested cases
5211 Wed Sep 30 16:09:20 1992 Michael Werner (mtw@cygnus.com)
5213 * z8k-dis.c (unparse_instr): fix bug where opcode returned was
5214 *always* the wrong one.
5216 Wed Sep 30 07:42:17 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5218 * z8kgen.c: added copyright info
5220 Tue Sep 29 12:20:21 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5222 * z8k-dis.c (unparse_instr): prettier tabs
5223 * z8kgen.c -> z8k-opc.h: bug fixes in tables
5225 Fri Sep 25 12:50:32 1992 Stu Grossman (grossman at cygnus.com)
5227 * configure.in: Add ncr* configuration.
5228 * z8k-dis.c (struct instr_data_s): Make instr_asmsrc char to make
5229 picayune ANSI compilers happy.
5231 Sep 20 08:50:55 1992 Fred Fish (fnf@cygnus.com)
5233 * configure.in (i386): Make i386 and i486 synonymous for now.
5234 * configure.in (i[34]86-*-sysv4): Add my_host definition.
5236 Fri Sep 18 17:01:23 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
5238 * Makefile.in (install): Fix typo.
5240 Fri Sep 18 02:04:24 1992 John Gilmore (gnu@cygnus.com)
5242 * Makefile.in (make): Remove obsolete crud.
5243 (sparc-opc.o): Avoid Sun Make VPATH bug.
5245 Tue Sep 8 17:29:27 1992 K. Richard Pixley (rich@sendai.cygnus.com)
5247 * Makefile.in: since there are no SUBDIRS, remove rule and
5248 references of subdir_do.
5250 Tue Sep 8 17:02:58 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
5252 * Makefile.in (install): Get the library name right here too.
5253 Don't install bfd.h, since it's unrelated to this library. No
5254 subdirs to recurse into, either.
5255 (CFILES): The source file has a .c suffix, not .o.
5257 * sparc-opc.c: New file, moved from BFD.
5258 * Makefile.in (OFILES): Build it.
5260 Thu Sep 3 16:59:20 1992 Michael Werner (mtw@cygnus.com)
5262 * z8k-dis.c: fixed forward refferences of some declarations.
5264 Mon Aug 31 16:09:45 1992 Michael Werner (mtw@cygnus.com)
5266 * Makefile.in: get the name of the library right
5268 Mon Aug 31 13:47:35 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5270 * z8k-dis.c: knows how to disassemble z8k stuff
5271 * z8k-opc.h: new file full of z8000 opcodes
5275 version-control: never