1 Sun Sep 19 10:41:27 1999 Jeffrey A Law (law@cygnus.com)
3 * hppa-dis.c (print_insn_hppa): Handle 'J', 'K', and 'cc'.
5 * hppa-dis.c (print_insn_hppa): Handle 'fe' and 'cJ'.
7 * hppa-dis.c (print_insn_hppa): Handle '#', 'd', and 'cq'.
9 * hppa-dis.c (print_insn_hppa): Handle 'm', 'h', '='.
11 * hppa-dis.c (print_insn_hppa): Handle 'X' operand.
13 * hppa-dis.c (print_insn_hppa): Handle 'B' operand.
15 * hppa-dis.c (print_insn_hppa): Handle 'M' and 'L' operands.
17 * hppa-dis.c (print_insn_hppa): Handle 'l' operand.
19 * hppa-dis.c (print_insn_hppa): Handle 'g' operand.
21 Sat Sep 18 11:36:12 1999 Jeffrey A Law (law@cygnus.com)
23 * hppa-dis.c (print_insn_hppa): Output a space after 'X' completer.
25 * hppa-dis.c: (print_insn_hppa): Do output a space before a 'v'
28 * hppa-dis.c: (print_insn_hppa): Handle 'fX'.
30 * hppa-dis.c: (print_insn_hppa): Add missing break after
33 * hppa-dis.c: Finish constifying various completers, register
36 1999-09-14 Michael Meissner <meissner@cygnus.com>
38 * configure.in (Canonicalization of target names): Remove adding
39 ${CONFIG_SHELL} in front of $ac_config_sub, since autoconfig 2.14
40 generates $ac_config_sub with a ${CONFIG_SHELL} already.
41 * configure: Regenerate.
43 Tue Sep 7 13:50:32 1999 Jeffrey A Law (law@cygnus.com)
45 * hppa-dis.c (print_insn_hppa): Escape '%' in output strings.
47 * hppa-dis.c (print_insn_hppa): Handle 'Z' argument.
49 1999-09-07 Nick Clifton <nickc@cygnus.com>
51 * sh-opc.h: Add mulu.w and muls.w patterns. These are the correct
52 names for the mulu and muls patterns.
54 1999-09-04 Steve Chamberlain <sac@pobox.com>
58 * disassemble.c (disassembler): Handle bfd_arch_pj.
59 * configure.in: Handle bfd_pj_arch.
60 * Makefile.am: Rebuild dependencies.
61 (CFILES): Add pj-dis.c and pj-opc.c.
62 (ALL_MACHINES): Add pj-dis.lo and pj-opc.lo.
63 * configure, Makefile.in: Rebuild.
65 1999-09-04 H.J. Lu <hjl@gnu.org>
67 * i386-dis.c (print_insn_i386): Set bytes_per_line to 7.
69 Mon Aug 30 18:56:14 1999 Richard Henderson <rth@cygnus.com>
71 * alpha-opc.c (fetch, fetch_m, ecb, wh64): RA must be R31.
73 1999-08-04 Doug Evans <devans@casey.cygnus.com>
75 * fr30-asm.c,fr30-desc.h,fr30-dis.c,fr30-ibld.c,fr30-opc.c: Rebuild.
76 * m32r-asm.c,m32r-desc.h,m32r-dis.c,m32r-ibld.c,m32r-opc.c: Rebuild.
77 * m32r-opinst.c: Rebuild.
79 Sat Aug 28 00:27:24 1999 Jerry Quinn <jquinn@nortelnetworks.com>
81 * hppa-dis.c (print_insn_hppa): Replace 'f' by 'v'. Prefix float
84 * hppa-dis.c (print_insn_hppa): Add args q, %, !, and |.
86 * hppa-dis.c (MASK_10, read_write_names, add_compl_names,
87 extract_10U_store): New.
88 (print_insn_hppa): Add new completers.
90 * hppa-dis.c (signed_unsigned_names,mix_half_names,
91 saturation_names): New.
92 (print_insn_hppa): Add completer codes 'a', 'ch', 'cH', 'cS', and 'c*'.
94 * hppa-dis.c (print_insn_hppa): Place completers behind prefix 'c'.
96 * hppa-dis.c (print_insn_hppa): Add cases for '.', '~'. '$'. and '!'
98 * hppa-dis.c (print_insn_hppa): Look at next arg instead of bits
99 to decide to print a space.
101 1999-08-21 Alan Modra <alan@spri.levels.unisa.edu.au>
103 * i386-dis.c: Add AMD athlon instruction support.
105 1999-08-10 Ian Lance Taylor <ian@zembu.com>
107 From Wally Iimura <iimura@microunity.com>:
108 * dis-buf.c (buffer_read_memory): Rewrite expression to avoid
109 overflow at end of address space.
110 (generic_print_address): Use sprintf_vma.
112 1999-08-08 Ian Lance Taylor <ian@zembu.com>
114 * Makefile.am: Rename .dep* files to DEP*. Change DEP variable to
115 MKDEP. Rebuild dependencies.
116 * Makefile.in: Rebuild.
118 Fri Aug 6 09:46:35 1999 Jerry Quinn <jquinn@nortelnetworks.com>
120 * hppa-dis.c (compare_cond_64_names, cmpib_cond_64_names,
121 add_cond_64_names, wide_add_cond_names, logical_cond_64_names,
122 unit_cond_64_names, shift_cond_64_names, bb_cond_64_names): New.
123 (print_insn_hppa): Add 64 bit condition completers.
125 Thu Aug 5 16:59:58 1999 Jerry Quinn <jquinn@nortelnetworks.com>
127 * hppa-dis.c (print_insn_hppa): Change condition args to use
130 Wed Jul 28 04:33:58 1999 Jerry Quinn <jquinn@nortelnetworks.com>
132 * hppa-dis.c (print_insn_hppa): Remove unnecessary test in 'E'
135 1999-07-21 Ian Lance Taylor <ian@zembu.com>
138 * configure.bat: Remove; obsolete.
140 1999-07-11 Ian Lance Taylor <ian@zembu.com>
142 * dis-buf.c: Add ATTRIBUTE_UNUSED as appropriate.
143 (generic_strcat_address): Add cast to avoid warning.
144 * i386-dis.c: Initialize all structure fields to avoid warnings.
145 Add ATTRIBUTE_UNUSED as appropriate.
147 1999-07-08 Jakub Jelinek <jj@ultra.linux.cz>
149 * sparc-dis.c (print_insn_sparc): Differentiate between
150 addition and oring when guessing symbol for comment.
152 1999-07-05 Nick Clifton <nickc@cygnus.com>
154 * arm-dis.c (print_insn_arm): Display hex equivalent of rotated
157 1999-06-23 Alan Modra <alan@spri.levels.unisa.edu.au>
159 * i386-dis.c: Mention intel mode specials in macro char comment.
161 1999-06-21 Ian Lance Taylor <ian@zembu.com>
163 * alpha-dis.c: Don't include <stdlib.h>.
164 * arm-dis.c: Include "sysdep.h".
165 * tic30-dis.c: Don't include <stdlib.h> or <string.h>. Include
167 * Makefile.am: Rebuild dependencies.
168 * Makefile.in: Rebuild.
170 1999-06-16 Nick Clifton <nickc@cygnus.com>
172 * arm-dis.c (print_insn_arm): Add detection of IMB and IMBRange
175 1999-06-14 Nick Clifton <nickc@cygnus.com> & Drew Mosley <dmoseley@cygnus.com>
177 * arm-dis.c (arm_regnames): Turn into a pointer to a register
179 (arm_regnames_standard): New variable: Array of ARM register
180 names according to ARM instruction set nomenclature.
181 (arm_regnames_apcs): New variable: Array of ARM register names
182 according to ARM Procedure Call Standard.
183 (arm_regnames_raw): New variable: Array of ARM register names
184 using just 'r' and the register number.
185 (arm_toggle_regnames): New function: Toggle the chosen register set
187 (parse_disassembler_options): New function: Parse any target
188 disassembler command line options.
189 (print_insn_big_arm): Call parse_disassembler_options if any
191 (print_insn_little_arm): Call parse_disassembler_options if any
194 1999-06-13 Ian Lance Taylor <ian@zembu.com>
196 * i386-dis.c (FWAIT_OPCODE): Define.
197 (used_prefixes): New static variable.
198 (fetch_data): Don't print an error message if we have already
199 fetched some bytes successfully.
200 (ckprefix): Clear used_prefixes. Use FWAIT_OPCODE, not 0x9b.
201 (prefix_name): New static function.
202 (print_insn_i386): If setjmp fails, indicating a data error, but
203 we have managed to fetch some bytes, print the first one as a
204 prefix or a .byte pseudo-op. If fwait is followed by a non
205 floating point instruction, print the first prefix. Set
206 used_prefixes when prefixes are used. If any prefixes were not
207 used after disassembling the instruction, print the first prefix
208 instead of printing the instruction.
209 (putop): Set used_prefixes when prefixes are used.
210 (append_seg, OP_E, OP_G, OP_REG, OP_I, OP_sI, OP_J): Likewise.
211 (OP_DIR, OP_SIMD_Suffix): Likewise.
213 1999-06-07 Jakub Jelinek <jj@ultra.linux.cz>
215 * sparc-opc.c: Fix up set, setsw, setuw operand kinds.
216 Support signx %reg, clruw %reg.
218 1999-06-07 Jakub Jelinek <jj@ultra.linux.cz>
220 * sparc-opc.c: Add aliases Solaris as supports.
222 Mon Jun 7 12:04:52 1999 Andreas Schwab <schwab@issan.cs.uni-dortmund.de>
224 * Makefile.am (CFILES): Add arc-{dis,opc}.c and v850-{dis,opc}.c.
225 * Makefile.in: Regenerated.
227 1999-06-03 Philip Blundell <philb@gnu.org>
229 * arm-dis.c (print_insn_arm): Make LDRH/LDRB consistent with LDR
230 when target is PC-relative.
232 1999-05-28 Linus Nordberg <linus.nordberg@canit.se>
234 * m68k-opc.c: Rename MACL/MSACL to MAC/MSAC. Add MACM/MSACM. Add
237 * m68k-dis.c (fetch_arg): Add places `n', `o'.
239 * m68k-opc.c: Add MSAC, MACL, MOVE to/from ACC, MACSR, MASK.
240 Add mcf5206e to appropriate instructions.
241 Add alias for MAC, MSAC.
243 * m68k-dis.c (print_insn_arg): Add formats `E', `G', `H' and place
246 * m68k-opc.c (m68k_opcodes): Add divsw, divsl, divuw, divul, macl,
247 macw, remsl, remul for mcf5307. Change mcf5200 --> mcf.
249 * m68k-dis.c: Add format `u' and places `h', `m', `M'.
251 1999-05-18 Alan Modra <alan@spri.levels.unisa.edu.au>
253 * i386-dis.c (Ed): Define.
254 (dis386_twobyte_att, dis386_twobyte_intel): Use Ed for movd.
256 (OP_rm): Rename to OP_Rd.
259 (putop): Add const to template and p.
260 (print_insn_x86): Delete.
261 (print_insn_i386): Merge old function print_insn_x86. Add const
263 (struct dis386): Add const to name.
264 (dis386_att, dis386_intel): Add const.
265 (dis386_twobyte_att, dis386_twobyte_intel): Add const.
266 (names32, names16, names8, names_seg, index16): Add const.
267 (grps, prefix_user_table, float_reg): Add const.
268 (float_mem_att, float_mem_intel): Add const.
269 (oappend): Add const to s.
270 (OP_REG): Add const to s.
271 (ptr_reg): Add const to s.
272 (dofloat): Add const to dp.
273 (OP_C): Don't skip modrm, it's now done in OP_Rd.
276 (OP_Rd): Check for valid mod. Call Op_E to print.
277 (OP_E): Handle d_mode arg. Check for bad sfence,lea,lds etc.
278 (OP_MS): Check for valid mod. Call Op_EM to print.
279 (OP_3DNowSuffix): Set obufp and use oappend rather than
280 strcat. Call BadOp() for errors.
281 (OP_SIMD_Suffix): Likewise.
282 (BadOp): New function.
284 1999-05-12 Alan Modra <alan@spri.levels.unisa.edu.au>
286 * i386-dis.c (dis386_intel): Remove macro chars, except for
287 jEcxz. Change cWtR and cRtd to cW and cR.
288 (dis386_twobyte_intel): Remove macro chars here too.
289 (putop): Handle R and W macros for intel mode.
291 * i386-dis.c (SIMD_Fixup): New function.
292 (dis386_twobyte_att): Use it on movlps and movhps, and change
293 Ev to EX on these insns. Change movmskps Ev, XM to Gv, EX.
294 (dis386_twobyte_intel): Same here.
296 * i386-dis.c (Av): Remove.
300 (OP_SIMD_Suffix): New function.
301 (OP_DIR): Remove dead code.
302 (eAX_reg..eDI_reg): Renumber.
303 (onebyte_has_modrm): Table numbering comments.
304 (INTERNAL_DISASSEMBLER_ERROR): Move to before print_insn_x86.
305 (print_insn_x86): Move all prefix oappends to after uses_f3_prefix
306 checks. Print error on invalid dp->bytemode2. Remove simd_cmp,
307 and handle SIMD cmp insns in OP_SIMD_Suffix.
308 (info->bytes_per_line): Bump from 5 to 6.
310 (OP_E): Use INTERNAL_DISASSEMBLER_ERROR. Handle sfence.
311 (OP_3DNowSuffix): Ensure mnemonic index unsigned.
313 PIII SIMD support from Doug Ledford <dledford@redhat.com>
314 * i386-dis.c (XM, EX, None): Define.
315 (OP_XMM, OP_EX, OP_None): New functions.
316 (USE_GROUPS, USE_PREFIX_USER_TABLE): Define.
317 (GRP14): Rename to GRPAMD.
318 (GRP*): Add USE_GROUPS flag.
320 (dis386_twobyte_att, dis386_twobyte_intel): Add SIMD insns.
321 (twobyte_has_modrm): Add SIMD entries.
322 (twobyte_uses_f3_prefix, simd_cmp_op, prefix_user_table): New.
323 (grps): Add SIMD insns.
324 (print_insn_x86): New vars uses_f3_prefix and simd_cmp. Don't
325 oappend repz if uses_f3_prefix. Add code to handle new groups for
328 From Maciej W. Rozycki <macro@ds2.pg.gda.pl>
329 * i386-dis.c (dis386_att, dis386_intel): Change 0xE8 call insn
330 operand from Av to Jv.
332 1999-05-07 Nick Clifton <nickc@cygnus.com>
334 * mcore-dis.c (print_insn_mcore): Use .short to display
335 unidentified instructions, not .word.
337 1999-04-26 Tom Tromey <tromey@cygnus.com>
339 * aclocal.m4, configure: Updated for new version of libtool.
341 1999-04-14 Doug Evans <devans@casey.cygnus.com>
343 * fr30-desc.c,fr30-desc.h,fr30-dis.c,fr30-ibld.c,fr30-opc.c: Rebuild.
344 * m32r-desc.c,m32r-desc.h,m32r-dis.c,m32r-ibld.c,m32r-opc.c: Rebuild.
346 Mon Apr 12 23:46:17 1999 Jeffrey A Law (law@cygnus.com)
348 * hppa-dis.c (print_insn_hppa, case '3'): New case for PA2.0
351 1999-04-10 Doug Evans <devans@casey.cygnus.com>
353 * fr30-desc.c,fr30-desc.h,fr30-ibld.c: Rebuild.
354 * m32r-desc.c,m32r-desc.h,m32r-opinst.c: Rebuild.
356 1999-04-06 Ian Lance Taylor <ian@zembu.com>
358 * opintl.h (LC_MESSAGES): Never define.
360 1999-04-04 Ian Lance Taylor <ian@zembu.com>
362 * i386-dis.c (intel_syntax, open_char, close_char): Make static.
363 (separator_char, scale_char): Likewise.
364 (print_insn_x86): Likewise.
365 (print_insn_i386): Likewise. Add declaration.
367 1999-03-26 Doug Evans <devans@casey.cygnus.com>
369 * fr30-dis.c: Rebuild.
370 * m32r-dis.c: Rebuild.
372 1999-03-23 Ian Lance Taylor <ian@zembu.com>
374 * m68k-opc.c: Change compare instructions to use "@s" rather than
375 ";s" when used with an immediate operand.
377 1999-03-22 Doug Evans <devans@casey.cygnus.com>
379 * cgen-opc.c (cgen_set_cpu): Delete.
380 (cgen_lookup_insn): max_insn_size renamed to max_insn_bitsize.
381 * fr30-desc.c,fr30-desc.h,fr30-dis.c,fr30-ibld.c,fr30-opc.c,fr30-opc.h:
383 * m32r-desc.c,m32r-desc.h,m32r-dis.c,m32r-ibld.c,m32r-opc.c,m32r-opc.h:
385 * po/opcodes.pot: Rebuild.
387 1999-03-16 Martin Hunt <hunt@cygnus.com>
389 * d30v-opc.c (mvtsys): Remove FLAG_LKR.
391 1999-03-11 Doug Evans <devans@casey.cygnus.com>
393 * cgen-opc.c (cgen_set_cpu): New arg `isa'. All callers updated.
394 (cgen_operand_lookup_by_name,cgen_operand_lookup_by_num): New fns.
395 (cgen_get_insn_operands): Rewrite test for hardcoded/operand index.
396 * fr30-asm.c,fr30-desc.c,fr30-desc.h,fr30-dis.c,fr30-ibld.c: Rebuild.
397 * m32r-asm.c,m32r-desc.c,m32r-desc.h,m32r-dis.c,m32r-ibld.c: Rebuild.
398 * m32r-opinst.c: Rebuild.
400 1999-02-25 Doug Evans <devans@casey.cygnus.com>
402 * cgen-opc.c (cgen_hw_lookup_by_name): Rewrite.
403 (cgen_hw_lookup_by_num): Rewrite.
404 * fr30-desc.c,fr30-desc.h,fr30-dis.c,fr30-ibld.c,fr30-opc.c: Rebuild.
405 * m32r-desc.c,m32r-desc.h,m32r-dis.c,m32r-ibld.c,m32r-opc.c: Rebuild.
406 * m32r-opinst.c: Rebuild.
408 Sat Feb 13 14:06:19 1999 Richard Henderson <rth@cygnus.com>
410 * alpha-opc.c: Add sqrt+flags patterns. Add EV6 PALcode insns.
411 (insert_jhint): Fix insertion mask.
412 * alpha-dis.c (print_insn_alpha): Disassemble EV6 PALcode insns.
414 1999-02-10 Doug Evans <devans@casey.cygnus.com>
416 * Makefile.in: Rebuild.
418 1999-02-09 Doug Evans <devans@casey.cygnus.com>
420 * i960c-asm.c,i960c-dis.c,i960c-opc.c,i960c-opc.h: Delete.
421 * i960-dis.c (print_insn_i960): Rename from print_insn_i960_orig.
422 * Makefile.am: Remove references to them.
423 (HFILES): Add fr30-desc.h,m32r-desc.h.
424 (CFILES): Add fr30-desc.c,fr30-ibld.c,m32r-desc.c,m32r-ibld.c,
426 (ALL_MACHINES): Update.
427 * configure.in: Redo handling of cgen_files.
428 (bfd_i960_arch): Delete i960c-*.lo files.
429 * configure: Regenerate.
430 * cgen-asm.c (*): CGEN_OPCODE_DESC renamed to CGEN_CPU_DESC.
431 (hash_insn_array): Rewrite.
432 * cgen-dis.c (*): CGEN_OPCODE_DESC renamed to CGEN_CPU_DESC.
433 (hash_insn_array): Rewrite.
434 * cgen-opc.c (*): CGEN_OPCODE_DESC renamed to CGEN_CPU_DESC.
435 (cgen_lookup_insn,cgen_get_insn_operands): Define here.
436 (cgen_lookup_get_insn_operands): Ditto.
437 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerate.
438 * m32r-asm.c,m32r-dis.c,m32r-opc.c,m32r-opc.h: Regenerate.
439 * po/POTFILES.in: Rebuild.
440 * po/opcodes.pot: Rebuild.
442 Fri Feb 5 00:04:24 1999 Ian Lance Taylor <ian@cygnus.com>
444 * Makefile.am: Rebuild dependencies.
445 (HFILES): Add fr30-opc.h.
446 (CFILES): Add fr30-asm.c, fr30-dis.c, fr30-opc.c.
447 * Makefile.in: Rebuild.
449 * configure.in: Change AC_PREREQ to 2.13. Remove AM_CYGWIN32.
450 Change AM_EXEEXT to AC_EXEEXT and AM_PROG_INSTALL to
452 * acconfig.h: Remove.
453 * configure: Rebuild with current autoconf/automake.
454 * aclocal.m4: Likewise.
455 * config.in: Likewise.
456 * Makefile.in: Likewise.
458 Thu Feb 4 13:48:52 1999 Ian Lance Taylor <ian@cygnus.com>
460 * m68k-opc.c: Correct move (not movew) to status word on 5200.
462 Mon Feb 1 20:54:36 1999 Catherine Moore <clm@cygnus.com>
464 * disassemble.c (disassembler): Handle bfd_mach_i386_i386_intel_syntax.
465 * i386-dis.c (x_mode): Define.
469 (dis386_twobyte): Remove.
470 (dis386_twobyte_att): New.
471 (dis386_twobyte_intel): New.
472 (print_insn_x86): Use new arrays.
474 (float_mem_intel): New.
475 (float_mem_att): New.
476 (dofloat): Use new float_mem arrays.
477 (print_insn_i386_att): New.
478 (print_insn_i386_intel): New.
479 (print_insn_i386): Handle bfd_mach_i386_i386_intel_syntax.
480 (putop): Handle intel syntax.
481 (OP_indirE): Handle intel syntax.
482 (OP_E): Handle intel syntax.
483 (OP_I): Handle intel syntax.
484 (OP_sI): Handle intel syntax.
485 (OP_OFF): Handle intel syntax.
489 1999-01-27 Doug Evans <devans@casey.cygnus.com>
491 * fr30-opc.h,fr30-opc.c: Rebuild.
492 * i960c-opc.h,i960c-opc.c: Rebuild.
493 * m32r-opc.c: Rebuild.
495 Tue Jan 19 18:01:54 1999 David Taylor <taylor@texas.cygnus.com>
497 * hppa-dis.c: revert HP merge changes until HP gives us
500 1999-01-19 Nick Clifton <nickc@cygnus.com>
502 * arm-dis.c (print_insn_arm): Display ARM syntax for PC relative
503 offsets as well as symbloic address.
505 Tue Jan 19 10:51:01 1999 David Taylor <taylor@texas.cygnus.com>
507 * hppa-dis.c: fix comments and some indentation.
509 1999-01-12 Doug Evans <devans@casey.cygnus.com>
511 * fr30-opc.c,i960c-opc.c: Regenerate.
513 1999-01-11 Doug Evans <devans@casey.cygnus.com>
515 * fr30-opc.c: Regenerate.
517 1999-01-06 Doug Evans <devans@casey.cygnus.com>
519 * m32r-dis.c: Regenerate.
521 1999-01-05 Doug Evans <devans@casey.cygnus.com>
523 * fr30-asm.c,fr30-dis.c,fr30-opc.h,fr30-opc.c: Regenerate.
524 * i960c-asm.c,i960c-dis.c,i960c-opc.h,i960c-opc.c: Regenerate.
525 * m32r-asm.c,m32r-dis.c,m32r-opc.h,m32r-opc.c: Regenerate.
527 1999-01-04 Jason Molenda (jsm@bugshack.cygnus.com)
529 * configure.in: Require autoconf 2.12.1 or higher.
531 1998-12-30 Gavin Romig-Koch <gavin@cygnus.com>
533 * mips16-opc.c: Mark branch insns with MIPS16_INSN_BRANCH.
535 Wed Dec 16 16:17:49 1998 Dave Brolley <brolley@cygnus.com>
537 * fr30-opc.c: Regenerated.
539 1998-12-16 Gavin Romig-Koch <gavin@cygnus.com>
541 * mips-dis.c (set_mips_isa_type): Handle bfd_mach_mips4111.
543 1998-12-15 Dave Brolley <brolley@cygnus.com>
545 * fr30-opc.c,fr30-opc.h: Regenerated.
547 1998-12-14 Dave Brolley <brolley@cygnus.com>
549 * fr30-opc.c,fr30-opc.h: Regenerated.
551 Thu Dec 10 18:39:46 1998 Dave Brolley <brolley@cygnus.com>
553 * fr30-opc.c,fr30-opc.h: Regenerated.
555 Thu Dec 10 12:49:24 1998 Doug Evans <devans@canuck.cygnus.com>
557 * m32r-opc.c: Regenerate.
559 Tue Dec 8 13:56:18 1998 David Taylor <taylor@texas.cygnus.com>
561 * dis-buf.c (generic_strcat_address): reformat to GNU coding
562 conventions. change sprintf call to an sprintf_vma call.
564 Tue Dec 8 13:12:44 1998 Dave Brolley <brolley@cygnus.com>
566 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
568 Tue Dec 8 10:50:46 1998 David Taylor <taylor@texas.cygnus.com>
570 The following changes were made by
571 Elena Zannoni <ezannoni@kwikemart.cygnus.com>,
572 David Taylor <taylor@texas.cygnus.com>, and
573 Edith Epstein <eepstein@sophia.cygnus.com> as part of a project to
574 merge in changes by HP; HP did not create ChangeLog entries.
576 * dis-buf.c (generic_strcat_address): new function.
578 * hppa-dis.c: Changes to improve hppa disassembly.
579 Changed formatting in : reg_names, fp_reg_names,control_reg,
580 New variables : sign_extension_names, deposit_names, conversion_names
581 float_test_names, compare_cond_names_double, add_cond_names_double,
582 logical_cond_names_double, unit_cond_names_double,
583 branch_push_pop_names, saturation_names, shift_names, mix_names,
584 New Macros : GET_COMPL_O, GET_PUSH_POP,MERGED_REG
585 Move some definitions to libhppa.h: GET_FIELD, GET_BIT
586 (fput_const): renamed as fput_hex_const
588 - use the macros fputs_filtered and
589 fput_decimal_const whenever possible; calls to sign_extend require
590 2 params -- add a missing second param of 0.
591 - Some new code ifdefed for LOCAL_ONLY, all related to figuring out
592 architecture version number of current machine. HP folks are
593 trying to handle situation where the target program was compiled
594 for PA 1.x (32-bit), but is running on a PA 2.0 machine and
596 - added new cases : 'g', 'B', 'm'
597 - added cases specifically for PA 2.0
598 - changed the following cases : '"', 'n', 'N', 'p', 'Z',
599 - calls to fput_const become calls to fput_hex_const
601 1998-12-07 James E Wilson <wilson@wilson-pc.cygnus.com>
603 * Makefile.am (CFILES): Add i960c-asm, i960c-dis.c, i960c-opc.c.
604 (ALL_MACHINES): Add i960c-asm.lo, i960c-dis.lo, i960-opc.lo.
605 (i960-asm.lo, i960c-dis.lo, i960c-opc.lo): New Makefile rules.
606 * Makefile.in: Rebuilt.
607 * configure.in (bfd_i960_arch): Add i960c-opc.lo, i960-asm.o,
609 * i960-dis.c (print_insn_i960): Rename to print_insn_i960_orig.
610 * i960c-asm.c, i960c-dis.c, i960c-opc.c, i960c-opc.h: New files.
612 Mon Dec 7 14:33:44 1998 Dave Brolley <brolley@cygnus.com>
614 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
616 Sun Dec 6 14:06:48 1998 Ian Lance Taylor <ian@cygnus.com>
618 * mips-opc.c (mips_builtin_opcodes): Add dmfc2 and dmtc2.
620 * ppc-opc.c (powerpc_opcodes): Add PowerPC403 GC[X] instructions.
621 From Saitoh Masanobu <msaitoh@spa.is.uec.ac.jp>.
623 Fri Dec 4 17:45:51 1998 Doug Evans <devans@canuck.cygnus.com>
625 * fr30-opc.c: Regenerate.
627 Fri Dec 4 17:08:08 1998 Dave Brolley <brolley@cygnus.com>
629 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
631 Thu Dec 3 14:26:20 1998 Dave Brolley <brolley@cygnus.com>
633 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
635 Thu Dec 3 00:09:17 1998 Doug Evans <devans@canuck.cygnus.com>
637 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerate.
639 1998-11-30 Doug Evans <devans@casey.cygnus.com>
641 * cgen-dis.c (hash_insn_array): CGEN_INSN_VALUE ->
642 CGEN_INSN_BASE_VALUE.
643 * m32r-opc.c,m32r-opc.h,m32r-asm.c,m32r-dis.c: Regenerate.
644 * fr30-opc.c,fr30-opc.h,fr30-asm.c,fr30-dis.c: Regenerate.
646 Thu Nov 26 11:26:32 1998 Dave Brolley <brolley@cygnus.com>
648 * fr30-asm.c,fr30-dis.c,fr30-opc.c: Regenerated.
650 Tue Nov 24 11:20:54 1998 Dave Brolley <brolley@cygnus.com>
652 * fr30-asm.c,fr30-dis.c: Regenerated.
654 Mon Nov 23 18:28:48 1998 Dave Brolley <brolley@cygnus.com>
656 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
658 1998-11-20 Doug Evans <devans@tobor.to.cygnus.com>
660 * fr30-opc.c: Regenerated.
662 Thu Nov 19 16:02:46 1998 Dave Brolley <brolley@cygnus.com>
664 * fr30-opc.c: Regenerated.
665 * fr30-opc.h: Regenerated.
666 * fr30-dis.c: Regenerated.
667 * fr30-asm.c: Regenerated.
669 Thu Nov 19 07:54:15 1998 Doug Evans <devans@charmed.cygnus.com>
671 * mips-opc.c (sync.p,sync.l): Swap insn values.
673 1998-11-19 Doug Evans <devans@tobor.to.cygnus.com>
675 * fr30-opc.c: Regenerate.
677 Wed Nov 18 21:36:37 1998 Dave Brolley <brolley@cygnus.com>
679 * fr30-opc.c: Regenerated.
680 * fr30-opc.h: Regenerated.
682 1998-11-18 Doug Evans <devans@casey.cygnus.com>
684 * m32r-asm.c,m32r-dis.c,m32r-opc.c: Rebuild.
685 * fr30-asm.c,fr30-dis.c,fr30-opc.c: Rebuild.
687 Wed Nov 18 11:30:04 1998 Dave Brolley <brolley@cygnus.com>
689 * fr30-opc.c: Regenerated.
691 Mon Nov 16 19:21:48 1998 Dave Brolley <brolley@cygnus.com>
693 * fr30-opc.c: Regenerated.
694 * fr30-opc.h: Regenerated.
695 * fr30-dis.c: Regenerated.
696 * fr30-asm.c: Regenerated.
698 Thu Nov 12 19:24:18 1998 Dave Brolley <brolley@cygnus.com>
700 * po/opcodes.pot: Regenerated.
701 * fr30-opc.c: Regenerated.
702 * fr30-opc.h: Regenerated.
703 * fr30-dis.c: Regenerated.
704 * fr30-asm.c: Regenerated.
706 Tue Nov 10 15:26:27 1998 Nick Clifton <nickc@cygnus.com>
708 * disassemble.c (disassembler): Add support for FR30 target.
710 Tue Nov 10 11:00:04 1998 Doug Evans <devans@canuck.cygnus.com>
712 * m32r-dis.c,m32r-opc.c,m32r-opc.h: Rebuild.
713 * fr30-dis.c,fr30-opc.c,fr30-opc.h: Rebuild.
715 Mon Nov 9 18:22:55 1998 Dave Brolley <brolley@cygnus.com>
717 * po/opcodes.pot: Regenerate.
718 * po/POTFILES.in: Regenerate.
719 * fr30-opc.c: Regenerate.
720 * fr30-opc.h: Regenerate.
722 Fri Nov 6 17:21:38 1998 Doug Evans <devans@canuck.cygnus.com>
724 * m32r-asm.c: Regenerate.
726 Wed Nov 4 18:46:47 1998 Dave Brolley <brolley@cygnus.com>
728 * configure.in: Added case for bfd_fr30_arch.
729 * Makefile.am (CFILES): Added fr30-asm.c, fr30-dis.c, fr30-opc.c.
730 (ALL_MACHINES): Added fr30-asm.lo, fr30-dis.lo, fr30-opc.lo.
731 (CLEANFILES): Added stamp-fr30.
733 * fr30-asm.c: New file.
734 * fr30-dis.c: New file.
735 * fr30-opc.c: New file.
736 * fr30-opc.h: New file.
737 * po/POTFILES.in: Regenerated
738 * po/opcodes.pot: Regenerated
740 Mon Nov 2 15:05:33 1998 Geoffrey Noer <noer@cygnus.com>
742 * configure.in: detect cygwin* instead of cygwin32*
743 * configure: regenerate
745 Tue Oct 27 08:58:37 1998 Gavin Romig-Koch <gavin@cygnus.com>
747 * mips-opc.c (IS_M): Added.
749 Mon Oct 19 13:03:19 1998 Doug Evans <devans@seba.cygnus.com>
751 * m32r-opc.c,m32r-opc.h,m32r-asm.c,m32r-dis.c: Regenerate.
753 Fri Oct 9 14:01:56 1998 Doug Evans <devans@seba.cygnus.com>
755 * m32r-opc.h,m32r-opc.c: Regenerate.
757 Sun Oct 4 21:01:44 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
759 * i386-dis.c (OP_3DNowSuffix): New static function.
762 (dis386_twobyte): Add GRP14, femms, and 3DNow entries.
763 (twobyte_has_modrm): Set entries corresponding to GRP14, 3DNow.
764 (insn_codep): New static variable.
765 (print_insn_x86): Init insn_codep after prefixes.
766 (grps): Add GRP14 entries for prefetch, prefetchw.
769 From Jeff B Epler <jepler@usgs.gov>
770 * i386-dis.c (Suffix3DNow): New table.
772 Wed Sep 30 10:17:50 1998 Nick Clifton <nickc@cygnus.com>
774 * d10v-opc.c: Treat TRAP as if it were a branch type instruction.
776 Mon Sep 28 14:35:43 1998 Martin M. Hunt <hunt@cygnus.com>
778 * d10v-dis.c (print_operand): If num is nonzero, then
779 add OPERAND_ACC1, not OPERAND_ACC0.
781 Thu Sep 24 09:20:03 1998 Nick Clifton <nickc@cygnus.com>
783 * d30v-opc.c: Add FLAG_JSR attribute to DBT, REIT, RTD, and TRAP
786 Tue Sep 22 17:55:14 1998 Nick Clifton <nickc@cygnus.com>
788 * d30v-opc.c: Add use of EITHER_BUT_PREFER_MU execution unit
791 Tue Sep 15 15:14:45 1998 Doug Evans <devans@canuck.cygnus.com>
793 * m32r-opc.h,m32r-opc.c: Add bbpc,bbpsw support.
795 1998-09-09 Michael Meissner <meissner@cygnus.com>
797 * ppc-opc.c (powerpc_opcodes): Add support for PowerPC 750 move
800 Fri Sep 4 19:42:59 1998 Nick Clifton <nickc@cygnus.com>
802 * arm-dis.c (print_insn_big_arm): Detect Thumb symbols in elf
804 (print_insn_little_arm): Detect Thumb symbols in elf object
807 Sat Aug 29 22:24:09 1998 Richard Henderson <rth@cygnus.com>
809 * alpha-dis.c (print_insn_alpha): Use the machine type to
810 decide which PALcode set to include.
812 Sun Aug 23 02:16:18 1998 Richard Henderson <rth@cygnus.com>
814 * sparc-opc.c (FBRX): Fix typo in ",a,pn %fcc3" case.
816 Fri Aug 21 16:07:52 1998 Nick Clifton <nickc@cygnus.com>
818 * d30v-opc.c (d30v_opcode_table): Add FLAG_MUL32 to MAC, MACS,
819 MSUB and MSUBS instructions.
821 Thu Aug 13 16:23:04 1998 Ian Lance Taylor <ian@cygnus.com>
823 * ppc-opc.c (powerpc_operands): Omit parens around additions in
826 Wed Aug 12 14:00:38 1998 Ian Lance Taylor <ian@cygnus.com>
828 From Peter Jeremy <peter.jeremy@auss2.alcatel.com.au>:
829 * m68k-opc.c: Correct mulsl and mulul to use q rather than D, a,
830 +, -, and d for ColdFire.
832 From Peter Thiemann <thiemann@informatik.uni-tuebingen.de>:
833 * ppc-opc.c (insert_mbe): Handle wrapping bitmasks.
834 (extract_mbe): Likewise.
836 Wed Aug 12 11:11:34 1998 Jeffrey A Law (law@cygnus.com)
838 * m10300-opc.c: Fix typo in udf20 .. udf25 instruction opcodes.
840 * m10300-opc.c: First cut at UDF instructions.
842 Mon Aug 10 14:08:22 1998 Doug Evans <devans@canuck.cygnus.com>
844 * m32r-opc.c: Regenerate (remove semantic descriptions).
846 Mon Aug 10 12:51:12 1998 Catherine Moore <clm@cygnus.com>
848 * arm-dis.c (print_insn_big_arm): Fix indentation.
849 (print_insn_little_arm): Likewise.
851 Sun Aug 9 20:17:28 1998 Catherine Moore <clm@cygnus.com>
853 * arm-dis.c (print_insn_big_arm): Check for thumb symbol
855 (print_insn_little_arm): Likewise.
857 Mon Aug 3 12:43:16 1998 Doug Evans <devans@seba.cygnus.com>
859 Move all global state data into opcode table struct, and treat
860 opcode table as something that is "opened/closed".
861 * cgen-asm.c (all fns): New first arg of opcode table descriptor.
862 (cgen_asm_init): Delete.
863 (cgen_set_parse_operand_fn): New function.
864 * cgen-dis.c (all fns): New first arg of opcode table descriptor.
865 (cgen_dis_init): Delete.
866 * cgen-opc.c (all fns): New first arg of opcode table descriptor.
867 (cgen_current_{opcode_table_mach,endian}): Delete.
868 * m32r-asm.c,m32r-dis.c,m32r-opc.c,m32r-opc.h: Regenerate.
870 Thu Jul 30 21:41:10 1998 Frank Ch. Eigler <fche@cygnus.com>
872 * d30v-opc.c (d30v_opcode_table): Add new "LKR" flag to some
875 Tue Jul 28 11:00:09 1998 Jeffrey A Law (law@cygnus.com)
877 * m10300-opc.c: Add entries for "no_match_operands" field in
880 Fri Jul 24 11:41:37 1998 Doug Evans <devans@canuck.cygnus.com>
882 * m32r-asm.c,m32r-opc.c: Regenerate (-Wall cleanups).
884 Tue Jul 21 13:41:07 1998 Doug Evans <devans@seba.cygnus.com>
886 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
888 Mon Jul 13 14:53:59 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
890 * i386-dis.c (ckprefix): Handle fwait specially only when it isn't
892 (dofloat): Correct test for fnstsw. Print `fnstsw %ax' rather
894 (OP_J): Remove unnecessary subtraction when 16-bit displacement
895 will be masked later.
897 Thu Jul 2 17:11:27 1998 Doug Evans <devans@seba.cygnus.com>
899 * m32r-opc.h (CGEN_MIN_INSN_SIZE): New #define.
901 Wed Jul 1 16:11:16 1998 Doug Evans <devans@seba.cygnus.com>
903 * m32r-asm.c,m32r-dis.c,m32r-opc.c,m32r-opc.h: Regenerate.
905 Fri Jun 26 11:08:55 1998 Jeffrey A Law (law@cygnus.com)
907 * m10300-dis.c: Only recognize instructions from the currently
909 * m10300-opc.c: Add field indicating the particular variant of
910 the mn10300 each instruction is available on.
912 Fri Jun 26 12:04:21 1998 Ian Lance Taylor <ian@cygnus.com>
914 * configure.in: For bfd_vax_arch, build vax-dis.lo.
915 * Makefile.am: Rebuild dependencies.
916 (CFILES): Add vax-dis.c.
917 (ALL_MACHINES): Add vax-dis.lo.
918 * aclocal.m4: Rebuild with current libtool.
919 * configure, Makefile.in: Rebuild.
921 Fri Jun 26 12:03:20 1998 Klaus Kaempf <kkaempf@progis.de>
923 * vax-dis.c: New file, from work by Pauline Middelink
924 <middelin@polyware.iaf.nl>.
925 * disassemble.c (ARCH_vax): Define if ARCH_all.
926 (disassembler): Add case for ARCH_vax.
927 * makefile.vms: Support compilation on vms/vax.
929 Tue Jun 23 19:42:18 1998 Mark Alexander <marka@cygnus.com>
931 * m10200-dis.c (print_insn_mn10200): Fix various non-portabilities
932 related to sign extension and the size of ints.
934 Tue Jun 23 10:59:26 1998 Jeffrey A Law (law@cygnus.com)
936 * m10300-opc.c: Support one operand "asr", "lsr" and "asl"
937 instructions. Support (sp) addressing mode by expanding it into
940 Sat Jun 20 14:46:20 1998 Frank Ch. Eigler <fche@cygnus.com>
942 * mips-dis.c (_print_insn_mips): Fix argument interchange typo.
944 Fri Jun 19 09:16:42 1998 Mark Alexander <marka@cygnus.com>
946 * m10200-dis.c (print_insn_mn10200): Recognize 'break' pseudo-op.
948 1998-06-18 Ulrich Drepper <drepper@cygnus.com>
950 * i386-dis.c: Add support for fxsave, fxrstor, sysenter and
953 Thu Jun 18 10:22:24 1998 John Metzler <jmetzler@cygnus.com>
955 * mips-dis.c (print_insn_little_mips): Previously, instruction
956 printing references the symbol table to determine whether the
957 instruction resides in a block regular instructions or mips16
958 instructions. However, when the disassembler gets used in other
959 environments where the symbol table is not present, we no longer
960 rely in the symbol table, rather, use the low bit of the
961 instructions address to guess. There should be no change for usage
962 of the disassembler in host based programs, gdb, objdump.
963 (print_insn_big_mips): ditto.
964 (print_insn_mips): ditto
966 Wed Jun 17 21:19:01 1998 Mark Alexander <marka@cygnus.com>
968 * m10200-dis.c (print_insn_mn10200): Don't bomb on unknown opcodes.
970 Wed Jun 17 17:49:23 1998 Jeffrey A Law (law@cygnus.com)
972 * m10300-opc.c (mn10300_opcodes): Change opcode for "syscall".
974 Tue Jun 16 13:10:51 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
976 * i386-dis.c (index16): Add '%' to register names. Use ','
979 Sat Jun 13 11:33:55 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
981 * i386-dis.c: Don't print opcode suffix when we can figure out the
982 size (and gas can!) by register operands, or from the default
984 (putop): Handle 'A', 'B', 'L', 'P', 'Q', 'R' macros. Rename 'C'
986 (dis386, dis386_twobyte, grps): Use new suffix macros.
987 (dis386): Correct imul Ib to imul sIb. Change jnl to jge to be
988 consistent. Add suffix for call, jmp, lcall, ljmp, iret. Reverse
989 order of cmps operands to agree with Intel docs. Correct operand
990 of aad and aam (Ib -> sIb). Change ud2b from 0fb8 to 0fb9 to
991 agree with Intel docs.
992 (print_insn_x86): Print orphan fwait before other prefixes.
993 Return correct byte count for orphan fwait with prefixes. Don't
994 print `bound' operands in reverse order.
995 (ckprefix): Stop accumulating prefixes if we get fwait.
996 (OP_DIR): Print `$' before Ap operands of ljmp, lcall.
998 Fri Jun 12 13:40:38 1998 Tom Tromey <tromey@cygnus.com>
1000 * po/Make-in (all-yes): If maintainer mode, depend on .pot file.
1001 ($(PACKAGE).pot): Unconditionally depend on POTFILES.
1003 Fri Jun 12 11:04:06 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1005 Fix problems when bfd_vma is wider than long.
1006 * i386-dis.c: Make op_address and start_pc unsigned.
1007 (set_op): Make parameter unsigned.
1008 (print_insn_x86): Cast to bfd_vma when passing a value to
1010 * ns32k-dis.c (CORE_ADDR): Don't define.
1011 (print_insn_ns32k): Change type of addr to bfd_vma. Use
1012 bfd_scan_vma to read back address.
1013 (print_insn_arg): Change type of addr to bfd_vma. Use sprintf_vma
1015 * m68k-dis.c (COERCE32): Cast to bfd_signed_vma to avoid overflow.
1016 (NEXTULONG): New definition.
1017 (print_insn_m68k): Avoid overflow when computing third argument of
1019 (print_insn_arg): Use NEXTULONG to fetch 32 bit address values.
1020 Use disp instead of val to store offset values.
1021 (print_indexed): Use base_disp instead of word to store base
1022 displacement, to avoid overflow.
1023 * m10300-dis.c (disassemble): Cast value to long when computing
1024 pc-relative address, to get correct sign extension.
1026 Wed Jun 10 15:58:37 1998 Doug Evans <devans@canuck.cygnus.com>
1028 * m32r-opc.c: Regenerate.
1030 Tue Jun 9 14:27:57 1998 Nick Clifton <nickc@cygnus.com>
1032 * arm-opc.h (thumb_opcodes): Display 'add rx, rY, #0' insns as
1033 'mov rX, rY'. Patch courtesy of Tony Thompson <Tony.Thompson@arm.com>
1035 Mon Jun 8 18:17:21 1998 Nick Clifton <nickc@cygnus.com>
1037 * d30v-opc.c: Remove FALG_MUL32 attribyte from MULX2H insn.
1039 Fri Jun 5 23:47:55 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
1041 * i386-dis.c: Combine aflag and dflag into sizeflag. Change OP_*
1043 (OP_DSreg): Rename from OP_DSSI.
1044 (OP_ESreg): Rename from OP_ESDI.
1045 (Xb, Xv, Yb, Yv): Use index reg code, not b_mode or v_mode.
1047 (append_seg): Rename from append_prefix.
1048 (ptr_reg): New function.
1049 (dis386): Add S suffix to pushf, popf, ret, lret, enter, leave.
1051 (PREFIX_ADDR): Rename from PREFIX_ADR.
1052 (float_reg): Add non-broken opcodes for people who don't want
1055 Fri Jun 5 19:15:04 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1057 * m68k-opc.c (tstb, tstw, tstl): Don't allow pcrel on
1060 Wed Jun 3 18:56:22 1998 H.J. Lu <hjl@gnu.org>
1062 * i386-dis.c (dis386): Change 0x60 to "pushaS", 0x61 to "popaS".
1064 Tue Jun 2 15:06:46 1998 Geoff Keating <geoffk@ozemail.com.au>
1066 * ppc-opc.c (powerpc_macros): Support shifts and rotates of size
1067 0; produce error message for shifts of size 32 (or 64 for 64-bit
1068 shifts), because the hardware doesn't support them.
1070 Wed May 27 15:29:13 1998 Nick Clifton <nickc@cygnus.com>
1072 * d30v-opc.c: Add new operand: Ra3. Change SHORT_B3, SHORT_B3b,
1073 LONG_2, LONG_2b formats to use this new operand.
1075 Tue May 26 20:47:48 1998 Stan Cox <scox@cygnus.com>
1077 * sparc-dis.c (compute_arch_mask): Added bfd_mach_sparc_sparclite_le.
1079 Tue May 26 20:45:33 1998 Mark Alexander <marka@cygnus.com>
1081 * sparc-dis.c (print_insn_sparc): big endian instruction / little
1082 endian data support.
1084 Tue May 26 16:14:39 1998 Nick Clifton <nickc@cygnus.com>
1086 * d30v-opc.c (d30v_format_table): Change definition of SHORT_B3
1087 and SHORT_B3b formats to use Rb instead of Ra.
1089 Add FLAG_MUL16 to MUL2XH opcode.
1091 Add FLAG_ADDSUBppp to SRC and SATHp opcodes to implement extension
1092 to existing 1.1.1 parallelisation prohibition procedure.
1094 Fri May 22 16:00:00 1998 Doug Evans <devans@canuck.cygnus.com>
1096 * m32r-asm.c,m32r-dis.c: Regenerate.
1098 Tue May 19 17:36:08 1998 Ian Lance Taylor <ian@cygnus.com>
1100 * mips-dis.c (print_mips16_insn_arg): Handle type ']' correctly
1101 with a shift count of 0.
1103 Fri May 15 14:58:31 1998 Doug Evans <devans@seba.cygnus.com>
1105 * cgen-opc.c (cgen_hw_lookup_by_name): Renamed from cgen_hw_lookup.
1106 (cgen_hw_lookup_by_num): New function.
1108 Wed May 13 17:03:59 1998 Doug Evans <devans@canuck.cygnus.com>
1110 * m32r-asm.c: Regenerate (handle uppercase HIGH/SHIGH/LOW/SDA).
1112 Wed May 13 14:34:31 1998 Mark Alexander <marka@cygnus.com>
1114 * sparc-dis.c (print_insn_sparc): Always fetch instructions
1115 as big-endian on SPARClite.
1117 Tue May 12 11:46:31 1998 Richard Henderson <rth@cygnus.com>
1119 * d30v-opc.c (pre_defined_register): Remove alias for r0.
1121 Sun May 10 22:37:22 1998 Jeffrey A Law (law@cygnus.com)
1123 * po/Make-in (install-info): New target.
1125 Thu May 7 17:15:59 1998 Ian Lance Taylor <ian@cygnus.com>
1127 * configure.in (WIN32LIBADD): Add -lintl on cygwin32.
1128 * configure: Rebuild.
1130 Thu May 7 12:49:46 1998 Frank Ch. Eigler <fche@cygnus.com>
1132 * mips-opc.c (teq,tge,tgeu,tlt,tltu,tne): Added three-operand
1133 variety of ISA2 instructions to set bottom ten bits of trap code.
1135 Thu May 7 11:54:25 1998 Ian Lance Taylor <ian@cygnus.com>
1137 * Makefile.am (config.status): Add explicit target so that
1138 config.status depends upon bfd/configure.in.
1139 * Makefile.in: Rebuild.
1141 Thu May 7 09:33:02 1998 Frank Ch. Eigler <fche@cygnus.com>
1143 * mips-opc.c (break, sdbbp): Added two-operand variety of ISA1
1144 instructions to set bottom ten bits of break code.
1145 * mips-dis.c (print_insn_arg): Implement 'q' operand format used
1146 for above optional argument.
1148 Wed May 6 15:30:06 1998 Klaus Kaempf <kkaempf@progis.de>
1150 * makefile.vms: Run dec c with /nodebug.
1152 Mon May 4 10:19:57 1998 Tom Tromey <tromey@cygnus.com>
1154 * Makefile.in: Rebuilt.
1155 * Makefile.am: Regenerated dependencies with mkdep.
1157 * opintl.h (_): Define as dgettext.
1159 Tue Apr 28 14:12:12 1998 Nick Clifton <nickc@cygnus.com>
1161 * cgen-asm.c: Internationalised.
1162 * m32r-asm.c: Internationalised.
1163 * m32r-dis.c: Internationalised.
1164 * m32r-opc.c: Internationalised.
1166 * aclocal.m4: Regenerated.
1167 * configure: Regenerated.
1168 * Makefile.am (POTFILES): Remove inclusion of BFD_H.
1169 * Makefile.in: Rebuild.
1170 * po/POTFILES.in: Rebuilt using rule in Makefile.in.
1171 * po/opcodes.pot: Rebuilt after changing POTFILES.in.
1173 Tue Apr 28 13:13:13 1998 Ian Lance Taylor <ian@cygnus.com>
1175 * configure.in: Call AC_ISC_POSIX near start. Move CY_GNU_GETTEXT
1177 * aclocal.m4, configure: Rebuild with current tools.
1179 Mon Apr 27 14:31:00 1998 Nick Clifton <nickc@cygnus.com>
1181 * opintl.h: New file - contains internationalisation macros used
1182 by source files in this directory.
1183 * po/: New subdirectory - contains internationalisation files.
1184 * po/Make-in: New file - Makefile constructor.
1185 * po/POTFILES.in: New file - list of files in opcodes directory
1186 that should be scan for internationalisation macros.
1187 * po/opcodes.pot: New file - list of internationisation strings
1188 found in files mentioned in po/POTFILES.in.
1189 * Makefile.am: Add rule to build po/POTFILES.in. Add SUBDIRS
1190 entry. Add intl directory to include paths.
1191 * acconfig.h: Add ENABLE_NLS, HAVE_CATGETS, HAVE_GETEXT,
1192 HAVE_STRCPY, HAVE_LC_MESSAGES
1193 * configure.in: Add rule to build Makefile in po subdirectory.
1194 * Makefile.in: Rebuilt.
1195 * aclocal.m4: Rebuilt.
1196 * config.in: Rebuilt.
1197 * configure: Rebuilt.
1198 * alpha-opc.c: Internationalised.
1199 * arc-dis.c: Internationalised.
1200 * arc-opc.c: Internationalised.
1201 * arm-dis.c: Internationalised.
1202 * cgen-asm.c: Internationalised.
1203 * d30v-dis.c: Internationalised.
1204 * dis-buf.c: Internationalised.
1205 * h8300-dis.c: Internationalised.
1206 * h8500-dis.c: Internationalised.
1207 * i386-dis.c: Internationalised.
1208 * m10200-dis.c: Internationalised.
1209 * m10300-dis.c: Internationalised.
1210 * m68k-dis.c: Internationalised.
1211 * m88k-dis.c: Internationalised.
1212 * mips-dis.c: Internationalised.
1213 * ns32k-dis.c: Internationalised.
1214 * opintl.h: Internationalised.
1215 * ppc-opc.c: Internationalised.
1216 * sparc-dis.c: Internationalised.
1217 * v850-dis.c: Internationalised.
1218 * v850-opc.c: Internationalised.
1220 Mon Apr 27 10:33:56 1998 Doug Evans <devans@seba.cygnus.com>
1222 * cgen-asm.c (cgen_current_opcode_table): Renamed from ..._data.
1223 (asm_hash_table_entries): New variable.
1224 (cgen_asm_init): Free asm_hash_table_entries.
1225 (hash_insn_array,hash_insn_list): New functions.
1226 (build_asm_hash_table): Use them. Hash macro insns as well.
1227 (cgen_asm_lookup_insn): Update.
1228 * cgen_dis.c (cgen_current_opcode_table): Renamed from ..._data.
1229 (dis_hash_table_entries): New variable.
1230 (cgen_dis_init): Free dis_hash_table_entries.
1231 (hash_insn_array,hash_insn_list): New functions.
1232 (build_dis_hash_table): Use them. Hash macro insns as well.
1233 (cgen_dis_lookup_insn): Update.
1234 * cgen-opc.c (cgen_current_opcode_table): Renamed from ..._data.
1235 (cgen_set_cpu,cgen_hw_lookup,cgen_insn_count): Update.
1236 (cgen_macro_insn_count): New function.
1237 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
1239 Fri Apr 24 16:07:57 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
1241 * i386-dis.c (OP_DSSI): Print segment override.
1243 Mon Apr 13 16:59:39 1998 Nick Clifton <nickc@cygnus.com>
1245 * arm-dis.c (print_insn_arm): Add "_all" extension to 'C'
1248 Mon Apr 13 16:50:27 1998 Ian Lance Taylor <ian@cygnus.com>
1250 * Makefile.am (libopcodes_la_LIBADD): Add @WIN32LIBADD@.
1251 (libopcodes_la_LDFLAGS): Add @WIN32LDFLAGS@.
1252 * configure.in: Define and substitute WIN32LDFLAGS and
1254 * aclocal.m4: Rebuild with new libtool.
1255 * configure, Makefile.in: Rebuild.
1257 Fri Apr 10 18:14:31 1998 Doug Evans <devans@canuck.cygnus.com>
1259 * m32r-opc.c: Regenerate.
1261 Sun Apr 5 16:04:39 1998 H.J. Lu <hjl@gnu.org>
1263 * Makefile.am (stamp-lib): Check that .libs/libopcodes.a exists
1264 before trying to copy it.
1265 * Makefile.in: Rebuild.
1267 Thu Apr 2 17:25:49 1998 Nick Clifton <nickc@cygnus.com>
1269 * m32r-opc.c: Use signed immediate values for CMPUI instruction.
1271 Wed Apr 1 16:20:27 1998 Ian Dall <Ian.Dall@dsto.defence.gov.au>
1273 * ns32k-dis.c (bit_extract_simple): New function to extract bits
1274 from an arbitrary valid buffer instead of fetching them on demand
1276 (invalid_float): use bit_extract_simple() instead of bit_extract().
1278 Tue Mar 31 11:09:08 1998 Ian Lance Taylor <ian@cygnus.com>
1280 From H.J. Lu <hjl@gnu.org>:
1281 * i386-dis.c (dis386): Change 0x8c and 0x8e to movS, and change Ew
1284 Mon Mar 30 17:32:03 1998 Ian Lance Taylor <ian@cygnus.com>
1286 * Branched binutils 2.9.
1288 Mon Mar 30 15:18:00 1998 Ken Raeburn <raeburn@cygnus.com>
1290 * d30v-dis.c (print_insn_d30v): Don't use uninitialized "num" when
1291 disassembling last 4 bytes of a section.
1293 Fri Mar 27 18:08:13 1998 Ian Lance Taylor <ian@cygnus.com>
1295 Fix some gcc -Wall warnings:
1296 * arc-dis.c (print_insn): Add casts to avoid warnings.
1297 * cgen-opc.c (cgen_keyword_lookup_name): Likewise.
1298 * d10v-dis.c (dis_long, dis_2_short): Likewise.
1299 * m10200-dis.c (disassemble): Likewise.
1300 * m10300-dis.c (disassemble): Likewise.
1301 * ns32k-dis.c (print_insn_ns32k): Likewise.
1302 * ppc-opc.c (insert_ral, insert_ram): Likewise.
1303 * cgen-dis.c (build_dis_hash_table): Remove used local variables.
1304 * cgen-opc.c (cgen_keyword_search_next): Likewise.
1305 * d10v-dis.c (dis_long, dis_2_short): Likewise.
1306 * d30v-dis.c (print_insn_d30v, lookup_opcode): Likewise.
1307 * ns32k-dis.c (bit_extract, print_insn_ns32k): Likewise.
1308 * tic80-dis.c (print_one_instruction): Likewise.
1309 * w65-dis.c (print_operand): Likewise.
1310 * z8k-dis.c (fetch_data): Likewise.
1311 * a29k-dis.c: Add return type for find_byte_func_type.
1312 * arc-opc.c: Include <stdio.h>. Remove declarations of
1313 insert_multshift and extract_multshift.
1314 * d30v-dis.c (lookup_opcode): Parenthesize assignments in
1316 (extract_value): Fully parenthesize expression.
1317 * h8500-dis.c (print_insn_h8500): Initialize local variables.
1318 * h8500-opc.h (h8500_table): Fully bracket initializer.
1319 * w65-opc.h (optable): Likewise.
1320 * i386-dis.c (print_insn_x86): Declare aflag and flag parameters.
1321 * i386-dis.c (OP_E): Initialize local variables.
1322 * m10200-dis.c (print_insn_mn10200): Likewise.
1323 * mips-dis.c (print_insn_mips16): Likewise.
1324 * sh-dis.c (print_insn_shx): Likewise.
1325 * v850-dis.c (print_insn_v850): Likewise.
1326 * ns32k-dis.c (print_insn_arg): Declare.
1327 (get_displacement, invalid_float): Declare.
1328 (list_search, sign_extend, flip_bytes): Declare return type.
1329 (get_displacement): Likewise.
1330 (print_insn_arg): Likewise. Make d int. Fix sprintf format
1332 (print_insn_ns32k): Make i unsigned.
1333 (invalid_float): Make static. Declare type of val.
1334 * tic30-dis.c (print_par_insn): Make i size_t. Don't check strlen
1335 on each for iteration.
1336 * tic30-dis.c (get_indirect_operand): Likewise.
1337 * z8k-dis.c (print_insn_z8001): Declare return type.
1338 (print_insn_z8002): Likewise.
1339 (unparse_instr): Fix sprintf format strings.
1341 Fri Mar 27 00:05:23 1998 Jeffrey A Law (law@cygnus.com)
1343 * mips-opc.c: Add "sync.l" and "sync.p".
1345 Wed Mar 25 14:32:48 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1347 * m68k-dis.c (print_insn_m68k): Use info->mach to select the
1348 default m68k variant to recognize.
1350 * i960-dis.c (pinsn): Change type of first argument to bfd_vma.
1351 (ctrl, cobr, mem, ea): Likewise.
1352 (print_addr): Likewise. Remove cast.
1353 (ea): Cast argument of print_addr to bfd_vma.
1355 * cgen-asm.c (cgen_parse_signed_integer): Fix type of local
1357 (cgen_parse_unsigned_integer): Likewise.
1358 (cgen_parse_address): Likewise.
1360 Wed Mar 25 14:31:31 1998 Ian Lance Taylor <ian@cygnus.com>
1362 * i960-dis.c (ctrl): Add full braces to structure initialization.
1363 (cobr, mem, reg): Likewise.
1364 (ea): Correct parenthesization in expression.
1366 * cgen-asm.c: Include <ctype.h>.
1367 (build_asm_hash_table): Remove unused local variable i.
1368 (cgen_parse_keyword): Add casts to avoid warnings.
1370 * arm-dis.c (print_insn_big_arm): Only call coffsymbol for a COFF
1371 symbol. Fix indentation.
1372 (print_insn_little_arm): Likewise.
1374 Fri Mar 20 18:55:18 1998 Ian Lance Taylor <ian@cygnus.com>
1376 * configure.in: Use AM_DISABLE_SHARED.
1377 * aclocal.m4, configure: Rebuild with libtool 1.2.
1379 Thu Mar 19 15:46:53 1998 Nick Clifton <nickc@cygnus.com>
1381 These patches are courtesy of Jonathan Walton and Tony Thompson
1382 (athompso@cambridge.arm.com).
1384 * arm-dis.c (print_insn_thumb): Ignore bottom two bits of PC
1387 * arm-opc.h (thumb_opcodes): Annotate PC relative addresses with
1388 both the offset and the label closest to the destination.
1390 Sat Mar 14 23:47:14 1998 Doug Evans <devans@seba.cygnus.com>
1392 * m32r-opc.h: Regenerate.
1394 Wed Mar 4 12:08:14 1998 Doug Evans <devans@canuck.cygnus.com>
1396 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
1398 Sat Feb 28 16:02:34 1998 Nick Clifton <nickc@cygnus.com>
1400 * arm-dis.c (print_insn_big_arm, print_insn_little_arm): Do not
1401 assume that info->symbols is non-empty.
1403 Sat Feb 28 12:19:05 1998 Richard Henderson <rth@cygnus.com>
1405 * alpha-opc.c (cvtqs) There is no such thing.
1406 (cvttq): Missing most of the /*d variants.
1408 Thu Feb 26 15:53:09 1998 Michael Meissner <meissner@cygnus.com>
1410 * d30v-opc.c (d30v_opcode_table): Indicate which instructions are
1411 delayed branches or jumps.
1413 Tue Feb 24 10:46:44 1998 Doug Evans <devans@canuck.cygnus.com>
1415 * arm-dis.c (print_insn_{big,little}_arm): info->symbol changed
1417 * mips-dis.c (print_insn_{big,little}_mips): Likewise.
1418 * tic30-dis.c (print_branch): Likewise.
1420 Tue Feb 24 11:06:18 1998 Nick Clifton <nickc@cygnus.com>
1422 * arm-dis.c (print_insn_big_arm, print_insn_little_arm): Remove
1423 saved_symbol code as it is no longer needed.
1425 Mon Feb 23 13:16:17 1998 Doug Evans <devans@seba.cygnus.com>
1427 * cgen-asm.c: Include symcat.h.
1428 * cgen-dis.c,cgen-opc.c: Ditto.
1429 * m32r-asm.c,m32r-dis.c,m32r-opc.h,m32r-opc.c: Regenerate.
1431 Mon Feb 23 10:34:58 1998 Jeffrey A Law (law@cygnus.com)
1433 * mips-dis.c (print_insn_arg): Do not prefix 'P' arguments with '$'.
1435 Thu Feb 19 16:51:13 1998 Doug Evans <devans@canuck.cygnus.com>
1437 * m32r-opc.[ch]: Regenerate.
1439 Tue Feb 17 17:14:50 1998 Doug Evans <devans@seba.cygnus.com>
1441 * cgen-asm.c (cgen_parse_{signed,unsigned}_integer): Delete min,max
1442 arguments. Don't perform validation here.
1443 * m32r-asm.c,m32r-dis.c,m32r-opc.c: Regenerate.
1445 Fri Feb 13 14:26:06 1998 Doug Evans <devans@canuck.cygnus.com>
1447 * m32r-opc.c: Regenerate.
1449 Fri Feb 13 14:53:02 1998 Ian Lance Taylor <ian@cygnus.com>
1451 * Makefile.am (AUTOMAKE_OPTIONS): Define.
1452 * configure, Makefile.in, aclocal.m4: Rebuild with automake 1.2e.
1454 Fri Feb 13 10:21:09 1998 Mark Alexander <marka@cygnus.com>
1456 * m10300-dis.c (print_insn_mn10300): Recognize break instruction.
1458 Fri Feb 13 13:12:14 1998 Ian Lance Taylor <ian@cygnus.com>
1460 * configure.in: Get the version number from BFD.
1461 * configure: Rebuild.
1463 From H.J. Lu <hjl@gnu.org>:
1464 * Makefile.am (libopcodes_la_LDFLAGS): Define.
1465 * Makefile.in: Rebuild.
1467 Fri Feb 13 09:50:32 1998 Nick Clifton <nickc@cygnus.com>
1469 * m32r-opc.c: Regenerate.
1470 * m32r-opc.h: Regenerate.
1472 Thu Feb 12 11:01:40 1998 Doug Evans <devans@canuck.cygnus.com>
1474 * m32r-opc.c: Regenerate.
1476 Thu Feb 12 03:41:00 1998 J"orn Rennecke <amylaar@cygnus.co.uk>
1478 Fix rac to accept only a0:
1479 * d10v-opc.c (d10v_predefined_registers, d10v_operands, d10v_opcodes):
1480 Split OPERAND_ACC into OPERAND_ACC0 and OPERAND_ACC1.
1481 Introduce OPERAND_GPR.
1482 * d10v-dis.c (print_operand): Likewise.
1484 Wed Feb 11 18:58:34 1998 Doug Evans <devans@seba.cygnus.com>
1486 * cgen-opc.c (cgen_set_cpu): Delete init of hw list `next' chain.
1487 (cgen_hw_lookup): Make result const.
1488 * m32r-opc.h, m32r-opc.c, m32r-asm.c, m32r-dis.c: Regenerate.
1490 Sat Feb 7 15:30:27 1998 Ian Lance Taylor <ian@cygnus.com>
1492 * configure, aclocal.m4: Rebuild with new libtool.
1494 Thu Feb 5 17:56:10 1998 Michael Meissner <meissner@cygnus.com>
1496 * d30v-opc.c (repeat{,i} instructions): Repeat/repeati
1497 instructions use a PC relative branch, not absolute.
1499 Wed Feb 4 19:17:37 1998 Ian Lance Taylor <ian@cygnus.com>
1501 * configure.in: Set libtool_enable_shared rather than
1502 libtool_shared. Remove diversion hack.
1503 * configure, Makefile.in, aclocal.m4: Rebuild with new libtool.
1505 Tue Feb 3 17:19:40 1998 Doug Evans <devans@seba.cygnus.com>
1507 * cgen-opc.c (cgen_set_cpu): Initialize hardware table.
1508 * m32r-opc.h, m32r-opc.c, m32r-asm.c, m32r-dis.c: Regenerate.
1510 Mon Feb 2 19:22:15 1998 Steve Haworth <steve@pm.cse.rmit.EDU.AU>
1512 * tic30-dis.c: New file.
1513 * disassemble.c (disassembler): Add bfd_arch_tic30 case.
1514 * configure.in: Handle bfd_tic30_arch.
1515 * Makefile.am: Rebuild dependencies.
1516 (CFILES): Add tic30-dis.c
1517 (ALL_MACHINES): Add tic30-dis.lo.
1518 * configure, Makefile.in: Rebuild.
1520 Thu Jan 29 13:02:56 1998 Doug Evans <devans@canuck.cygnus.com>
1522 * m32r-opc.h (HAVE_CPU_M32R): Define.
1524 Wed Jan 28 09:55:03 1998 Nick Clifton <nickc@cygnus.com>
1526 * v850-opc.c (insertion routines): If both alignment and size is
1527 wrong then report this.
1529 Tue Jan 27 21:52:59 1998 Jeffrey A Law (law@cygnus.com)
1531 * mips-dis.c (_print_insn_mips): Set target_processor as appropriate.
1532 Only recognize instructions for the current target_processor.
1534 Thu Jan 22 16:20:17 1998 Fred Fish <fnf@cygnus.com>
1536 * d10v-dis.c (PC_MASK): Correct value.
1537 (print_operand): If there's a reloc, don't calculate the
1538 address because they could be in different sections.
1540 Fri Jan 16 15:29:11 1998 Jim Blandy <jimb@zwingli.cygnus.com>
1542 * mips-opc.c (mips_builtin_opcodes): Move 4010's "addciu"
1543 instruction after the 4650's "mul" instruction; nobody's using the
1544 4010 these days. If object files someday indicate which processor
1545 variant they're intended for, we can do a better job at this.
1547 Mon Jan 12 14:43:54 1998 Doug Evans <devans@seba.cygnus.com>
1549 * cgen-asm.c (build_asm_hash_table): Traverse compiled in table using
1550 table provided entry size. Use CGEN_INSN_MNEMONIC.
1551 (cgen_parse_keyword): Rewrite.
1552 * cgen-dis.c (build_dis_hash_table): Traverse compiled in table using
1553 table provided entry size. Use CGEN_INSN_MASK_BITSIZE.
1554 * cgen-opc.c: Clean up pass over `struct foo' usage.
1555 (cgen_keyword_lookup_value): Handle "" entry.
1556 (cgen_keyword_add): Likewise.
1558 Mon Dec 22 12:37:06 1997 Ian Lance Taylor <ian@cygnus.com>
1560 * mips-opc.c: Add FP_D to s.d instruction flags.
1562 Wed Dec 17 11:38:29 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1564 * m68k-opc.c (halt, pulse): Enable them on the 68060.
1566 Tue Dec 16 15:22:53 1997 Fred Fish <fnf@cygnus.com>
1568 * tic80-opc.c (tic80_opcodes): Revert change that put the 32 bit
1569 PC relative offset forms before the 15 bit forms. An assembler command
1570 line option now chooses the default.
1572 Tue Dec 16 15:22:51 1997 Michael Meissner <meissner@cygnus.com>
1574 * d30v-opc.c (d30v_opcode_table): Set new flags bits
1575 FLAG_{2WORD,MUL{16,32},ADDSUBppp}, in appropriate instructions.
1577 1997-12-15 Brendan Kehoe <brendan@lisa.cygnus.com>
1579 * configure: Only build libopcodes shared if --enable-shared's value
1580 was `yes', or was set to `*opcodes*'.
1581 * aclocal.m4: Likewise.
1582 * NOTE: this really needs to be fixed in libtool/libtool.m4, the
1583 original source of this bit of code. It's not clear what the best fix
1586 Fri Dec 12 11:57:04 1997 Fred Fish <fnf@cygnus.com>
1588 * tic80-opc.c (OFF_SL_PC, OFF_SL_BR): Minor formatting change.
1589 (tic80_opcodes): Reorder table entries to put the 32 bit PC relative
1590 offset forms before the 15 bit forms, to default to the long forms.
1592 Fri Dec 12 01:32:30 1997 Richard Henderson <rth@cygnus.com>
1594 * alpha-opc.c (cvttq/*u*): Remove, as that suffix is invalid.
1596 Wed Dec 10 17:42:35 1997 Nick Clifton <nickc@cygnus.com>
1598 * arm-dis.c (print_insn_little_arm): Prevent examination of stored
1599 symbol if none is present.
1600 (print_insn_big_arm): Prevent examination of stored symbol if
1603 Thu Oct 23 21:13:37 1997 Fred Fish <fnf@cygnus.com>
1605 * d10v-opc.c (d10v_opcodes): Correct entry for RTE.
1607 Mon Dec 8 11:21:07 1997 Nick Clifton <nickc@cygnus.com>
1609 * disassemble.c: Remove disasm_symaddr() function.
1611 * arm-dis.c: Use info->symbol instead of info->flags to determine
1612 if disassmbly should be in Thumb or Arm mode.
1614 Tue Dec 2 09:54:27 1997 Nick Clifton <nickc@cygnus.com>
1616 * arm-dis.c: Add support for disassembling Thumb opcodes.
1617 (print_insn_thumb): New function.
1619 * disassemble.c (disasm_symaddr): New function.
1621 * arm-opc.h: Display nop pseudo ops alongside equivalent disassembly.
1622 (thumb_opcodes): Table of Thumb opcodes.
1624 Mon Dec 1 12:25:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1626 * m68k-opc.c (btst): Change Dd@s to Dd;b.
1628 * m68k-dis.c (print_insn_arg): Recognize 'm', 'n', 'o', 'p', 'q',
1629 and 'v' as operand types.
1631 Mon Dec 1 11:56:50 1997 Ian Lance Taylor <ian@cygnus.com>
1633 * m68k-opc.c: Add argument for lpstop. From Olivier Carmona
1634 <olivier.carmona@di.epfl.ch>.
1635 * m68k-dis.c (print_insn_m68k): Handle special case of lpstop,
1636 which has a two word opcode with a one word argument.
1638 Sun Nov 23 22:25:21 1997 Michael Meissner <meissner@cygnus.com>
1640 * d30v-opc.c (d30v_opcode_table, case cmpu): Immediate field is
1641 unsigned, not signed.
1642 (d30v_format_table): Add SHORT_CMPU cases for cmpu.
1644 Tue Nov 18 23:10:03 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1646 * d10v-dis.c (print_operand):
1647 Split OPERAND_FLAG into OPERAND_FFLAG and OPERAND_CFLAG.
1649 Tue Nov 18 18:45:14 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1651 * d10v-opc.c (OPERAND_FLAG): Split into:
1652 (OPERAND_FFLAG, OPERAND_CFLAG) .
1656 Thu Nov 13 11:05:33 1997 Gavin Koch <gavin@cygnus.com>
1658 * mips-opc.c: Move the INSN_MACRO ISA value to the membership
1659 field for all INSN_MACRO's.
1660 * mips16-opc.c: same
1662 Wed Nov 12 10:16:57 1997 Gavin Koch <gavin@cygnus.com>
1664 * mips-opc.c (sync,cache): These are 3900 insns.
1666 Tue Nov 11 23:53:41 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1668 sh-opc.h (sh_table): Remove ftst/nan.
1670 Tue Oct 28 17:59:32 1997 Ken Raeburn <raeburn@cygnus.com>
1672 * mips-opc.c (ffc, ffs): Fix mask.
1674 Tue Oct 28 16:34:54 1997 Michael Meissner <meissner@cygnus.com>
1676 * d30v-opc.c (pre_defined_registers): Add eit_vb, int_s, and int_m
1679 Mon Oct 27 22:34:03 1997 Ken Raeburn <raeburn@cygnus.com>
1681 * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
1682 (WR_HILO, RD_HILO, MOD_HILO): New macros.
1684 Mon Oct 27 22:34:03 1997 Ken Raeburn <raeburn@cygnus.com>
1686 * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
1687 (WR_HILO, RD_HILO, MOD_HILO): New macros.
1689 Thu Oct 23 14:57:58 1997 Nick Clifton <nickc@cygnus.com>
1691 * v850-dis.c (disassemble): Replace // with /* ... */
1693 Wed Oct 22 17:33:21 1997 Richard Henderson <rth@cygnus.com>
1695 * sparc-opc.c: Add wr & rd for v9a asr's.
1696 * sparc-dis.c (print_insn_sparc): Recognize '_' and '/' for v9a asr's.
1697 (v9a_asr_reg_names): New variable.
1698 Patch from David Miller <davem@vger.rutgers.edu>.
1700 Wed Oct 22 17:18:02 1997 Richard Henderson <rth@cygnus.com>
1702 * sparc-opc.c (v9notv9a): New insn type.
1703 (IMPDEP): Move to the end to not conflict with edge8 et al.
1704 Patch from David Miller <davem@vger.rutgers.edu>.
1706 Fri Oct 17 13:18:53 1997 Gavin Koch <gavin@cygnus.com>
1708 * mips-opc.c (bnezl,beqzl): Mark these as also tx39.
1710 Thu Oct 16 11:55:20 1997 Gavin Koch <gavin@cygnus.com>
1712 * mips-opc.c: Note that 'jalx' is (probably incorrectly) marked I1.
1714 Tue Oct 14 16:10:31 1997 Nick Clifton <nickc@cygnus.com>
1716 * v850-dis.c (disassemble): Use new symbol_at_address_func() field
1717 of disassemble_info structure to determine if an overlay address
1718 has a matching symbol in low memory.
1720 * dis-buf.c (generic_symbol_at_address): New (dummy) function for
1721 new symbol_at_address_func field in disassemble_info structure.
1723 Fri Oct 10 16:44:52 1997 Nick Clifton <nickc@cygnus.com>
1725 * v850-opc.c (extract_d22): Use signed arithmatic.
1727 Tue Oct 7 23:40:43 1997 Gavin Koch <gavin@cygnus.com>
1729 * mips-opc.c: Three op mult is not an ISA insn.
1731 Tue Oct 7 23:37:21 1997 Gavin Koch <gavin@cygnus.com>
1733 * mips-opc.c: Fix formatting.
1735 Fri Oct 3 17:26:54 1997 Ian Lance Taylor <ian@cygnus.com>
1737 * i386-dis.c (OP_E): Explicitly sign extend 8 bit values, rather
1738 than assuming that char is signed. Explicitly sign extend 16 bit
1739 values, rather than assuming that short is 16 bits.
1740 (OP_sI, OP_J, OP_DIR): Likewise.
1742 Thu Oct 2 13:36:45 1997 Nick Clifton <nickc@cygnus.com>
1744 * v850-dis.c (v850_sreg_names): Use symbolic names for higher
1747 Wed Oct 1 16:58:54 1997 Nick Clifton <nickc@cygnus.com>
1749 * v850-opc.c: Fix typo in comment.
1751 * v850-dis.c (disassemble): Add test of processor type when
1752 determining opcodes.
1754 Wed Oct 1 14:10:20 1997 Ian Lance Taylor <ian@cygnus.com>
1756 * configure.in: Use a diversion to set enable_shared before the
1757 arguments are parsed.
1758 * configure: Rebuild.
1760 Thu Sep 25 13:04:59 1997 Ian Lance Taylor <ian@cygnus.com>
1762 * m68k-opc.c (TBL1): Use ! rather than `.
1763 * m68k-dis.c (print_insn_arg): Remove ` operand specifier.
1765 Wed Sep 24 11:29:35 1997 Ian Lance Taylor <ian@cygnus.com>
1767 * m68k-opc.c: Correct bchg, bclr, bset, and btst on ColdFire.
1769 * m68k-opc.c: Accept tst{b,w,l} with immediate operands on cpu32.
1771 * m68k-opc.c: Correct movew of an immediate operand to %sr or %ccr
1774 * configure.in: Call AC_CHECK_TOOL before AM_PROG_LIBTOOL.
1775 * aclocal.m4: Rebuild with new libtool.
1776 * configure: Rebuild.
1778 Fri Sep 19 11:45:49 1997 Andrew Cagney <cagney@b1.cygnus.com>
1780 * v850-opc.c ("cmov"): Order reg param r1, r2 not r2, r2.
1782 Thu Sep 18 11:21:43 1997 Doug Evans <dje@canuck.cygnus.com>
1784 * sparc-opc.c (sparclet_cpreg_table): Add %ccsr2, %cccrr, %ccrstr.
1786 Tue Sep 16 15:18:20 1997 Nick Clifton <nickc@cygnus.com>
1788 * v850-opc.c (v850_opcodes): Further rearrangements.
1790 Tue Sep 16 16:12:11 1997 Ken Raeburn <raeburn@cygnus.com>
1792 * d30v-opc.c (rot2h, sra2h, srl2h insns): Revert last change.
1794 Tue Sep 16 09:48:50 1997 Nick Clifton <nickc@cygnus.com>
1796 * v850-opc.c (v850_opcodes): Fields reordered to allow assembler
1799 Tue Sep 16 10:01:00 1997 Gavin Koch <gavin@cygnus.com>
1801 * mips-opc.c: Added tx39 insns sdbbp, rfe, and deret.
1803 Mon Sep 15 18:31:52 1997 Nick Clifton <nickc@cygnus.com>
1805 * v850-opc.c: Initialise processors field of v850_opcode structure.
1807 Wed Aug 27 21:42:39 1997 Ken Raeburn <raeburn@cygnus.com>
1809 Merge changes from Martin Hunt:
1811 * d30v-opc.c: Change mvfacc to accept 6-bit unsigned values.
1813 * d30v-opc.c (pre_defined_registers): Add control registers from 0-63.
1814 (d30v_opcode_tabel): Add dbt, rtd, srah, and srlh instructions. Fix
1815 rot2h, sra2h, and srl2h to use new SHORT_A5S format.
1817 * d30v-dis.c (print_insn): Fix disassembly of SHORT_D2 opcodes.
1819 * d30v-dis.c (print_insn): First operand of d*i (delayed
1820 branch) instructions is relative.
1822 * d30v-opc.c (d30v_opcode_table): Change form for repeati.
1823 (d30v_operand_table): Add IMM6S3 type.
1824 (d30v_format_table): Change SHORT_D2. Add LONG_Db.
1826 * d30v-dis.c: Fix bug with ".s" and ".l" extensions
1827 and cmp instructions.
1829 * d30v-opc.c: Correct entries for repeat*, and sat*.
1830 Make IMM5 unsigned. Create IMM6U and IMM12S3U operand
1831 types. Correct several formats.
1833 * d30v-opc.c: (pre_defined_registers): Add dpsw and dpc.
1835 * d30v-opc.c (pre_defined_registers): Change control registers.
1837 * d30v-opc.c (d30v_format_table): Correct SHORT_C1 and
1838 SHORT_C2. Manual was incorrect.
1840 * d30v-dis.c (lookup_opcode): Return value now indicates
1841 if an opcode has a short and a long form. Used for deciding
1842 to append a ".s" or ".l".
1843 (print_insn): Append a ".s" to an instruction if it is
1844 the short form and ".l" if it is a long form. Do not append
1845 anything if the instruction has only one possible size.
1847 * d30v-opc.c: Change mulx2h to require an even register.
1848 New form: SHORT_A2; a SHORT_A form that needs an even
1849 register as the first operand.
1851 * d30v-dis.c (print_insn_d30v): Fix problem where the last
1852 instruction was not being disassembled if there were an odd
1853 number of instructions.
1855 * d30v-opc.c (SHORT_M2, LONG_M2): Two new forms.
1857 Fri Sep 12 11:43:54 1997 Nick Clifton <nickc@cygnus.com>
1859 * v850-dis.c (disassemble): Improved display of register lists.
1861 Thu Sep 11 17:35:10 1997 Doug Evans <dje@canuck.cygnus.com>
1863 * sparc-opc.c (sparc_opcodes): Fix assembler args to
1864 fzeros, fones, fsrc1, fsrc1s, fsrc2s, fnot1, fnot1s, fnot2s,
1865 fors, fnors, fands, fnands, fxors, fxnors, fornot1s, fornot2s,
1866 fandnot1s, fandnot2s.
1868 Tue Sep 9 10:03:49 1997 Doug Evans <dje@canuck.cygnus.com>
1870 * sparc-opc.c (sparc_opcodes): Fix op3 field for fcmpq/fcmpeq.
1872 Mon Sep 8 14:06:59 1997 Doug Evans <dje@canuck.cygnus.com>
1874 * cgen-asm.c (cgen_parse_address): New argument resultp.
1875 All callers updated.
1876 * m32r-asm.c (parse_h_hi16): Right shift numbers by 16.
1878 Tue Sep 2 18:39:08 1997 Jeffrey A Law (law@cygnus.com)
1880 * mn10200-dis.c (disassemble): PC relative instructions are
1881 relative to the next instruction, not the current instruction.
1883 Tue Sep 2 15:41:55 1997 Nick Clifton <nickc@cygnus.com>
1885 * v850-dis.c (disassemble): Only signed extend values that are not
1886 returned by extract functions.
1887 Remove use of V850_OPERAND_ADJUST_SHORT_MEMORY flag.
1889 Tue Sep 2 15:39:40 1997 Nick Clifton <nickc@cygnus.com>
1891 * v850-opc.c: Update comments. Remove use of
1892 V850_OPERAND_ADJUST_SHORT_MEMORY. Fix several operand patterns.
1894 Tue Aug 26 09:42:28 1997 Nick Clifton <nickc@cygnus.com>
1896 * v850-opc.c (MOVHI): Immediate parameter is unsigned.
1898 Mon Aug 25 15:58:07 1997 Christopher Provenzano <proven@cygnus.com>
1900 * configure: Rebuilt with latest devo autoconf for NT support.
1902 Fri Aug 22 10:35:15 1997 Nick Clifton <nickc@cygnus.com>
1904 * v850-dis.c (disassemble): Use curly brace syntax for register
1907 * v850-opc.c (v850_opcodes[]): Add NOT_R0 flag to decect cases
1908 where r0 is being used as a destination register.
1910 Thu Aug 21 11:09:09 1997 Nick Clifton <nickc@cygnus.com>
1912 * v850-opc.c (v850_opcodes[]): Move divh opcodes next to each other.
1914 Tue Aug 19 10:59:59 1997 Richard Henderson <rth@cygnus.com>
1916 * alpha-opc.c (alpha_opcodes): Fix hw_rei_stall mungage.
1918 Mon Aug 18 11:10:03 1997 Nick Clifton <nickc@cygnus.com>
1920 * v850-opc.c (v850_opcodes[]): Remove use of flag field.
1921 * v850-opc.c (v850_opcodes[]): Add support for reversed short load
1924 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
1926 * configure (cgen_files): Add support for v850e target.
1927 * configure.in (cgen_files): Add support for v850e target.
1929 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
1931 * configure (cgen_files): Add support for v850ea target.
1932 * configure.in (cgen_files): Add support for v850ea target.
1934 Fri Aug 15 05:17:48 1997 Doug Evans <dje@canuck.cygnus.com>
1936 * configure.in (bfd_arc_arch): Add.
1937 * configure: Rebuild.
1938 * Makefile.am (ALL_MACHINES): Add arc-dis.lo, arc-opc.lo.
1939 * Makefile.in: Rebuild.
1940 * arc-dis.c, arc-opc.c: New files.
1941 * disassemble.c (ARCH_all): Define ARCH_arc.
1942 (disassembler): Add ARC support.
1944 Wed Aug 13 18:52:11 1997 Nick Clifton <nickc@cygnus.com>
1946 * v850-dis.c (disassemble): Add support for v850EA instructions.
1948 * v850-opc.c (insert_i5div, extract_i5div): New Functions.
1949 (v850_opcodes): Add v850EA instructions.
1951 * v850-dis.c (disassemble): Add support for v850E instructions.
1953 * v850-opc.c (insert_d5_4, extract_d5_4, insert_d16_16,
1954 extract_d16_16, insert_i9, extract_i9, insert_u9, extract_u9,
1955 insert_spe, extract_spe): New Functions.
1956 (v850_opcodes): Add v850E instructions.
1958 * v850-opc.c: Reorganised and re-layed out to improve readability
1961 Tue Aug 5 23:09:31 1997 Ian Lance Taylor <ian@cygnus.com>
1963 * configure: Rebuild with autoconf 2.12.1.
1965 Mon Aug 4 12:02:16 1997 Ian Lance Taylor <ian@cygnus.com>
1967 * aclocal.m4, configure: Rebuild with new automake patches.
1969 Fri Aug 1 13:02:04 1997 Ian Lance Taylor <ian@cygnus.com>
1971 * configure.in: Set enable_shared before AM_PROG_LIBTOOL.
1972 * acinclude.m4: Just include acinclude.m4 from BFD.
1973 * aclocal.m4, configure: Rebuild.
1975 Thu Jul 31 21:44:42 1997 Ian Lance Taylor <ian@cygnus.com>
1977 * Makefile.am: New file, based on old Makefile.in.
1978 * acconfig.h: New file.
1979 * acinclude.m4: New file.
1980 * stamp-h.in: New file.
1981 * configure.in: Call AM_INIT_AUTOMAKE and AM_PROG_LIBTOOL.
1982 Removed shared library handling; now handled by libtool. Replace
1983 AC_CONFIG_HEADER with AM_CONFIG_HEADER. Call AM_MAINTAINER_MODE,
1984 AM_CYGWIN32, and AM_EXEEXT. Replace AC_PROG_INSTALL with
1985 AM_PROG_INSTALL. Change all .o files to .lo. Remove stamp-h
1986 handling in AC_OUTPUT.
1987 * dep-in.sed: Change .o to .lo.
1988 * Makefile.in: Now built with automake.
1989 * aclocal.m4: Now built with aclocal.
1990 * config.in, configure: Rebuild.
1992 Mon Jul 28 21:52:24 1997 Jeffrey A Law (law@cygnus.com)
1994 * mips-opc.c: Fix typo/thinko in "eret" instruction.
1996 Thu Jul 24 13:03:26 1997 Doug Evans <dje@canuck.cygnus.com>
1998 * sparc-opc.c (sparc_opcodes): Fix spelling on fpaddX, fpsubX insns.
2000 * sparc-dis.c (sorted_opcodes): New static local.
2001 (struct opcode_hash): `opcode' is pointer to const element.
2002 (build_hash): First arg is now table of sorted pointers.
2003 (print_insn_sparc): Sort opcodes by sorting table of pointers.
2004 (compare_opcodes): Update.
2006 Tue Jul 15 12:05:23 1997 Doug Evans <dje@canuck.cygnus.com>
2008 * cgen-opc.c: #include <ctype.h>.
2009 (hash_keyword_name): New arg `case_sensitive_p'. Callers updated.
2010 Handle case insensitive hashing.
2011 (hash_keyword_value): Change type of `value' to unsigned int.
2013 Thu Jul 10 12:56:10 1997 Jeffrey A Law (law@cygnus.com)
2015 * mips-opc.c (mips_builtin_opcodes): If an insn uses single
2016 precision FP, mark it as such. Likewise for double precision
2017 FP. Mark ISA1 insns. Consolidate duplicate opcodes where
2020 Wed Jun 25 15:25:57 1997 Felix Lee <flee@cirdan.cygnus.com>
2022 * ppc-opc.c (extract_nsi): make unsigned expression signed before
2024 (UNUSED): remove one level of parens, so MSVC doesn't choke on
2025 nesting depth when all the macros are expanded.
2027 Tue Jun 17 17:02:17 1997 Ian Lance Taylor <ian@cygnus.com>
2029 * sparc-opc.c: The fcmp v9a instructions take an integer register
2030 as a destination, not a floating point register. From Christian
2031 Kuehnke <Christian.Kuehnke@arbi.Informatik.Uni-Oldenburg.DE>.
2033 Mon Jun 16 14:13:18 1997 Ian Lance Taylor <ian@cygnus.com>
2035 * m68k-dis.c (print_insn_arg): Print case 7.2 using %pc@()
2036 syntax. From Roman Hodek
2037 <rnhodek@faui22c.informatik.uni-erlangen.de>.
2039 * i386-dis.c (twobyte_has_modrm): Fix pand.
2041 Mon Jun 16 14:08:38 1997 Michael Taylor <mbt@mit.edu>
2043 * i386-dis.c (dis386_twobyte): Fix pand and pandn.
2045 Tue Jun 10 11:26:47 1997 H.J. Lu <hjl@gnu.ai.mit.edu>
2047 * arm-dis.c: Add prototypes for arm_decode_shift and
2050 Mon Jun 2 11:39:04 1997 Gavin Koch <gavin@cygnus.com>
2052 * mips-opc.c: Add r3900 insns.
2054 Tue May 27 15:55:44 1997 Ian Lance Taylor <ian@cygnus.com>
2056 * sh-dis.c (print_insn_shx): Change relmask to bfd_vma. Don't
2057 print delay slot instructions on the same line. When using a PC
2058 relative load, add a comment with the value being loaded if it can
2061 Tue May 27 11:02:08 1997 Alan Modra <alan@spri.levels.unisa.edu.au>
2063 * i386-dis.c (dis386[], dis386_twobyte[]): change pushl/popl
2064 to pushS/popS for segment regs and byte constant so that
2065 pushw/popw printed when in 16 bit data mode.
2067 * i386-dis.c (dis386[]): change cwtl, cltd to cWtS, cStd to
2068 print cbtw, cwtd in 16 bit data mode.
2069 * i386-dis.c (putop): extra case W to support above.
2071 * i386-dis.c (print_insn_x86): print addr32 prefix when given
2072 address size prefix in 16 bit address mode.
2074 Fri May 23 16:47:23 1997 Ian Lance Taylor <ian@cygnus.com>
2076 * sh-dis.c: Reindent. Rename local variable fprintf to
2079 Thu May 22 14:06:02 1997 Doug Evans <dje@canuck.cygnus.com>
2081 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Undo patch of May 2.
2083 Tue May 20 11:26:27 1997 Gavin Koch <gavin@cygnus.com>
2085 * mips-opc.c (mips_builtin_opcodes): Moved INSN_ISA field into new
2087 * mips16-opc.c (mip16_opcodes): same.
2089 Mon May 12 15:10:53 1997 Jim Wilson <wilson@cygnus.com>
2091 * m68k-opc.c (moveb): Change $d to %d.
2093 Mon May 5 14:28:41 1997 Ian Lance Taylor <ian@cygnus.com>
2095 * i386-dis.c: (dis386_twobyte): Add MMX instructions.
2096 (twobyte_has_modrm): Likewise.
2098 (OP_MMX, OP_EM, OP_MS): New static functions.
2100 * i386-dis.c: Revert patch of April 4. The output now matches
2103 Fri May 2 12:48:37 1997 Doug Evans <dje@canuck.cygnus.com>
2105 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Use $uimm16 instead
2108 Thu May 1 15:34:15 1997 Doug Evans <dje@canuck.cygnus.com>
2110 * m32r-opc.h (CGEN_ARCH): Renamed from CGEN_CPU.
2112 Tue Apr 15 12:40:08 1997 Ian Lance Taylor <ian@cygnus.com>
2114 * Makefile.in (install): Depend upon installdirs.
2115 (installdirs): New target.
2117 Mon Apr 14 12:13:51 1997 Ian Lance Taylor <ian@cygnus.com>
2119 From Thomas Graichen <graichen@rzpd.de>:
2120 * configure.in: Use ${CONFIG_SHELL} when running $ac_config_sub.
2121 * configure: Rebuild.
2123 Sun Apr 13 17:50:41 1997 Doug Evans <dje@canuck.cygnus.com>
2125 * cgen-*.c, m32r-*.c: #include sysdep.h instead of config.h.
2126 Delete string{,s}.h support.
2128 Thu Apr 10 14:44:56 1997 Doug Evans <dje@canuck.cygnus.com>
2130 * cgen-asm.c (cgen_parse_operand_fn): New global.
2131 (cgen_parse_{{,un}signed_integer,address}): Update call to
2132 cgen_parse_operand_fn.
2133 (cgen_init_parse_operand): New function.
2134 * m32r-asm.c (parse_insn_normal): cgen_init_parse_operand renamed
2135 from cgen_asm_init_parse.
2136 (m32r_cgen_assemble_insn): New operand `errmsg'.
2137 Delete call to as_bad, return error message to caller.
2138 (m32r_cgen_asm_hash_keywords): #if 0 out.
2140 Wed Apr 9 12:05:25 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2142 * m68k-dis.c (print_insn_arg) [case 'd']: Print as address register,
2144 [case 'J']: Fix typo in register name.
2146 Mon Apr 7 16:48:22 1997 Ian Lance Taylor <ian@cygnus.com>
2148 * configure.in: Substitute SHLIB_LIBS.
2149 * configure: Rebuild.
2150 * Makefile.in (SHLIB_LIBS): New variable.
2151 ($(SHLIB)): Use $(SHLIB_LIBS).
2153 Mon Apr 7 11:45:44 1997 Doug Evans <dje@canuck.cygnus.com>
2155 * cgen-dis.c (build_dis_hash_table): Fix xmalloc size computation.
2157 * cgen-opc.c (hash_keyword_name): Improve algorithm.
2159 * disassemble.c (disassembler): Handle m32r.
2161 Fri Apr 4 12:29:38 1997 Doug Evans <dje@canuck.cygnus.com>
2163 * m32r-asm.c, m32r-dis.c, m32r-opc.c, m32r-opc.h: New files.
2164 * cgen-asm.c, cgen-dis.c, cgen-opc.c: New files.
2165 * Makefile.in (CFILES): Add them.
2166 (ALL_MACHINES): Add them.
2167 (dependencies): Regenerate.
2168 * configure.in (cgen_files): New variable.
2169 (bfd_m32r_arch): Add entry.
2170 * configure: Regenerate.
2172 Fri Apr 4 14:04:16 1997 Ian Lance Taylor <ian@cygnus.com>
2174 * configure.in: Correct file names for bfd_mn10[23]00_arch.
2175 * configure: Rebuild.
2177 * Makefile.in: Rebuild dependencies.
2179 * d10v-dis.c: Include "ansidecl.h" before "opcode/d10v.h".
2181 * i386-dis.c (float_reg): Swap fsubrp and fsubp. Swap fdivrp and
2184 Thu Apr 3 13:22:45 1997 Ian Lance Taylor <ian@cygnus.com>
2186 * Branched binutils 2.8.
2188 Wed Apr 2 12:23:53 1997 Ian Lance Taylor <ian@cygnus.com>
2190 * m10200-dis.c: Rename from mn10200-dis.c.
2191 * m10200-opc.c: Rename from mn10200-opc.c.
2192 * m10300-dis.c: Rename from mn10300-dis.c
2193 * m10300-opc.c: Rename from mn10300-opc.c.
2194 * Makefile.in: Update accordingly.
2196 * mips16-opc.c: Add mul and dmul macros.
2198 Tue Apr 1 16:27:45 1997 Klaus Kaempf <kkaempf@progis.de>
2200 * makefile.vms: Update CFLAGS, add clean target.
2202 Fri Mar 28 12:10:09 1997 Ian Lance Taylor <ian@cygnus.com>
2204 * mips-opc.c: Add "wait". From Ralf Baechle
2205 <ralf@gnu.ai.mit.edu>.
2207 * configure.in: Add stdlib.h to AC_CHECK_HEADERS list.
2208 * configure, config.in: Rebuild.
2209 * sysdep.h: Include <stdlib.h> if it exists.
2210 * sparc-dis.c: Include <stdio.h> and "sysdep.h". Don't include
2212 * Makefile.in: Rebuild dependencies.
2214 Thu Mar 27 14:24:43 1997 Ian Lance Taylor <ian@cygnus.com>
2216 * ppc-opc.c: Add PPC 403 instructions and extended opcodes. From
2217 Andrew Bray <andy@madhouse.demon.co.uk>.
2219 * mips-opc.c: Add cast when setting mips_opcodes.
2221 Tue Mar 25 23:04:00 1997 Stu Grossman (grossman@critters.cygnus.com)
2223 * v850-dis.c (disassemble): Fix sign extension problem.
2224 * v850-opc.c (extract_d*): Fix sign extension problems to make
2225 disassembly calculate branch offsets correctly.
2227 Mon Mar 24 13:22:13 1997 Ian Lance Taylor <ian@cygnus.com>
2229 * sh-opc.h: Add bf/s and bt/s as synonyms for bf.s and bt.s.
2231 * mips-opc.c: Add dctr and dctw.
2233 Sun Mar 23 18:08:10 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2235 * d30v-dis.c (print_insn): Change the way signed constants
2238 Fri Mar 21 14:37:52 1997 Ian Lance Taylor <ian@cygnus.com>
2240 * Makefile.in (BFD_H): New variable.
2241 (HFILES): New variable.
2242 (CFILES): Add all C files.
2243 (.dep, .dep1, dep.sed, dep, dep-in): New targets.
2244 Delete old dependencies, and build new ones.
2245 * dep-in.sed: New file.
2247 Thu Mar 20 19:03:30 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
2249 * m68k-opc.c (m68k_opcode_aliases): Added blo and blo{s,b,w,l}.
2251 Tue Mar 18 14:17:03 1997 Jeffrey A Law (law@cygnus.com)
2253 * mn10200-opc.c: Change "trap" to "syscall".
2254 * mn10300-opc.c: Add new "syscall" instruction.
2256 Mon Mar 17 08:48:03 1997 J.T. Conklin <jtc@beauty.cygnus.com>
2258 * m68k-opc.c (m68k_opcodes): Provide correct entries for mulsl and
2259 mulul insns on the coldfire.
2261 Sat Mar 15 17:13:05 1997 Ian Lance Taylor <ian@cygnus.com>
2263 * arm-dis.c (print_insn_arm): Don't print instruction bytes.
2264 (print_insn_big_arm): Set bytes_per_chunk and display_endian.
2265 (print_insn_little_arm): Likewise.
2267 Fri Mar 14 15:08:59 1997 Ian Lance Taylor <ian@cygnus.com>
2269 Based on patches from H.J. Lu <hjl@lucon.org>:
2270 * i386-dis.c (fetch_data): Add prototype.
2271 * m68k-dis.c (fetch_data): Add prototype.
2272 (dummy_print_address): Add prototype. Make static.
2273 * ppc-opc.c (valid_bo): Add prototype.
2274 * sparc-dis.c (build_hash_table): Add prototype.
2275 (is_delayed_branch, compute_arch_mask): Add prototypes.
2276 (print_insn_sparc): Make several local variables const.
2277 (compare_opcodes): Change arguments to const PTR. Add prototype.
2278 * sparc-opc.c (arg): Change name field to be const.
2279 (lookup_name, lookup_value): Add prototypes. Change table and
2280 name parameters to be const.
2281 (sparc_encode_asi): Change name parameter to be const.
2282 (sparc_encode_membar, sparc_encode_prefetch): Likewise.
2283 (sparc_encode_sparclet_cpreg): Likewise.
2284 (sparc_decode_asi): Change return type to be const.
2285 (sparc_decode_membar, sparc_decode_prefetch): Likewise.
2286 (sparc_decode_sparclet_cpreg): Likewise.
2288 Fri Mar 7 10:51:49 1997 Ian Lance Taylor <ian@cygnus.com>
2290 * Makefile.in ($(SHLINK)): Just use ln -s, not ln -sf, since
2291 Solaris doesn't like the combined options, and the -f is
2293 (stamp-tshlink, install): Likewise.
2295 Thu Mar 6 16:51:11 1997 Jeffrey A Law (law@cygnus.com)
2297 * mn10300-opc.c (IMM16_PCREL, SD8N_PCREL, D16_SHIFT): Mark these
2300 Tue Mar 4 06:10:36 1997 J.T. Conklin <jtc@cygnus.com>
2302 * m68k-opc.c (m68k_opcodes): Fix last change for the mc68010.
2304 Mon Mar 3 07:45:20 1997 J.T. Conklin <jtc@cygnus.com>
2306 * m68k-opc.c (m68k_opcodes): Added entries for the tst insns on
2309 Thu Feb 27 14:04:32 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
2311 * m68k-opc.c (m68k_opcodes): Added swbegl pseudo-instruction.
2313 Thu Feb 27 11:36:41 1997 Michael Meissner <meissner@cygnus.com>
2315 * tic80-dis.c (print_insn_tic80): Set info->bytes_per_line to 8.
2317 Wed Feb 26 15:34:48 1997 Michael Meissner <meissner@cygnus.com>
2319 * tic80-opc.c (tic80_predefined_symbols): Define r25 properly.
2321 Wed Feb 26 13:38:30 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2323 * m68k-dis.c (NEXTSINGLE, NEXTDOUBLE, NEXTEXTEND): Use
2324 floatformat_to_double to make portable.
2325 (print_insn_arg): Use NEXTEXTEND macro when extracting extended
2328 Mon Feb 24 19:26:12 1997 Dawn Perchik <dawn@cygnus.com>
2330 * mips-opc.c: Initialize mips_opcodes to mips_builtin_opcodes,
2331 and bfd_mips_num_opcodes to bfd_mips_num_builtin_opcodes.
2333 Mon Feb 24 15:19:01 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2335 * d10v-dis.c, d10v-opc.c: Change pre_defined_registers to
2336 d10v_predefined_registers and reg_name_cnt to d10v_reg_name_cnt.
2338 Mon Feb 24 14:33:26 1997 Fred Fish <fnf@cygnus.com>
2340 * tic80-opc.c (LSI_SCALED): Renamed from this ...
2341 (OFF_SL_BR_SCALED): ... to this, and added the flag
2342 TIC80_OPERAND_BASEREL to the flags word.
2343 (tic80_opcodes): Replace all occurances of LSI_SCALED with
2346 Sat Feb 22 21:25:00 1997 Dawn Perchik <dawn@cygnus.com>
2348 * mips-opc.c: Add macros for cop0, cop1 cop2 and cop3.
2349 Change mips_opcodes from const array to a pointer,
2350 and change bfd_mips_num_opcodes from const int to int,
2351 so that we can increase the size of the mips opcodes table
2354 Sat Feb 22 21:03:47 1997 Fred Fish <fnf@cygnus.com>
2356 * tic80-opc.c (tic80_predefined_symbols): Revert change to
2357 store BITNUM values in the table in one's complement form
2358 to match behavior when assembler is given a raw numeric
2359 value for a BITNUM operand.
2360 * tic80-dis.c (print_operand_bitnum): Ditto.
2362 Fri Feb 21 16:31:18 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2364 * d30v-opc.c: Removed references to FLAG_X.
2366 Wed Feb 19 14:51:20 1997 Ian Lance Taylor <ian@cygnus.com>
2368 * Makefile.in: Add dependencies on ../bfd/bfd.h as required.
2370 Tue Feb 18 17:43:43 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2372 * Makefile.in: Added d30v object files.
2373 * configure: (bfd_d30v_arch) Rebuilt.
2374 * configure.in: (bfd_d30v_arch) Added new case.
2375 * d30v-dis.c: New file.
2376 * d30v-opc.c: New file.
2377 * disassemble.c (disassembler) Add entry for d30v.
2379 Tue Feb 18 16:32:08 1997 Fred Fish <fnf@cygnus.com>
2381 * tic80-opc.c (tic80_predefined_symbols): Add symbolic
2382 representations for the floating point BITNUM values.
2384 Fri Feb 14 12:14:05 1997 Fred Fish <fnf@cygnus.com>
2386 * tic80-opc.c (tic80_predefined_symbols): Store BITNUM values
2387 in the table in one's complement form, as they appear in the
2389 (tic80_symbol_to_value): Use macros to access predefined
2391 (tic80_value_to_symbol): Ditto.
2392 (tic80_next_predefined_symbol): New function.
2393 * tic80-dis.c (print_operand_bitnum): Remove code that did
2394 one's complement for BITNUM values.
2396 Thu Feb 13 21:56:51 1997 Klaus Kaempf <kkaempf@progis.de>
2398 * makefile.vms: Remove 8 bit characters. Update to latest
2401 Thu Feb 13 20:41:22 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
2403 * m68k-opc.c (m68k_opcodes): Add swbeg pseudo-instruction.
2405 Thu Feb 13 16:30:02 1997 Jeffrey A Law (law@cygnus.com)
2407 * mn10200-opc.c (IMM16_PCREL): This is a signed operand.
2408 (IMM24_PCREL): Likewise.
2410 Thu Feb 13 13:28:43 1997 Ian Lance Taylor <ian@cygnus.com>
2412 * mips-dis.c (print_mips16_insn_arg): Use memaddr - 2 as the base
2413 address for an extended PC relative instruction that is not a
2416 Wed Feb 12 12:27:40 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2418 * m68k-dis.c (print_insn_m68k): Set bytes_per_chunk and
2421 Tue Feb 11 16:36:31 1997 Fred Fish <fnf@cygnus.com>
2423 * tic80-opc.c (tic80_operands): Fix typo '+' -> '|'.
2424 (tic80_opcodes): Sort entries so that long immediate forms
2425 come after short immediate forms, making it easier for
2426 assembler to select the right one for a given operand.
2428 Tue Feb 11 15:26:47 1997 Ian Lance Taylor <ian@cygnus.com>
2430 * mips-dis.c (_print_insn_mips): Set bytes_per_chunk and
2432 (print_insn_mips16): Likewise.
2434 Mon Feb 10 10:12:41 1997 Fred Fish <fnf@cygnus.com>
2436 * tic80-opc.c (tic80_symbol_to_value): Changed to accept
2437 a symbol class that restricts translation to just that
2438 class (general register, condition code, etc).
2440 Thu Feb 6 17:34:09 1997 Fred Fish <fnf@cygnus.com>
2442 * tic80-opc.c (tic80_operands): Add REG_0_E, REG_22_E,
2443 and REG_DEST_E for register operands that have to be
2444 an even numbered register. Add REG_FPA for operands that
2445 are one of the floating point accumulator registers.
2446 Add TIC80_OPERAND_MASK to flags for ENDMASK operand.
2447 (tic80_opcodes): Change entries that need even numbered
2448 register operands to use the new operand table entries.
2449 Add "or" entries that are identical to "or.tt" entries.
2451 Wed Feb 5 11:12:44 1997 Ian Lance Taylor <ian@cygnus.com>
2453 * mips16-opc.c: Add new cases of exit instruction for
2455 * mips-dis.c (print_mips16_insn_arg): Display floating point
2456 registers in operands of exit instruction. Print `$' before
2457 register names in operands of entry and exit instructions.
2459 Thu Jan 30 14:09:03 1997 Fred Fish <fnf@cygnus.com>
2461 * tic80-opc.c (tic80_predefined_symbols): Table of name/value
2462 pairs for all predefined symbols recognized by the assembler.
2463 Also used by the disassembling routines.
2464 (tic80_symbol_to_value): New function.
2465 (tic80_value_to_symbol): New function.
2466 * tic80-dis.c (print_operand_control_register,
2467 print_operand_condition_code, print_operand_bitnum):
2468 Remove private tables and use tic80_value_to_symbol function.
2470 Thu Jan 30 11:30:45 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2472 * d10v-dis.c (print_operand): Change address printing
2473 to correctly handle PC wrapping. Fixes PR11490.
2475 Wed Jan 29 09:39:17 1997 Jeffrey A Law (law@cygnus.com)
2477 * mn10200-opc.c (mn10200_operands): Make 8 and 16 bit pc-relative
2480 Tue Jan 28 15:57:34 1997 Ian Lance Taylor <ian@cygnus.com>
2482 * mips-dis.c (print_insn_mips16): Set insn_info information.
2483 (print_mips16_insn_arg): Likewise.
2485 * mips-dis.c (print_insn_mips16): Better handling of an extend
2486 opcode followed by an instruction which can not be extended.
2488 Fri Jan 24 12:08:21 1997 J.T. Conklin <jtc@cygnus.com>
2490 * m68k-opc.c (m68k_opcodes): Changed operand specifier for the
2491 coldfire moveb instruction to not allow an address register as
2492 destination. Although the documentation does not indicate that
2493 this is invalid, experiments uncovered unexpected behavior.
2494 Added a comment explaining the situation. Thanks to Andreas
2495 Schwab for pointing this out to me.
2497 Wed Jan 22 20:13:51 1997 Fred Fish <fnf@cygnus.com>
2499 * tic80-opc.c (tic80_opcodes): Expand comment to note that the
2500 entries are presorted so that entries with the same mnemonic are
2501 adjacent to each other in the table. Sort the entries for each
2502 instruction so that this is true.
2504 Mon Jan 20 12:48:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2506 * m68k-dis.c: Include <libiberty.h>.
2507 (print_insn_m68k): Sort the opcode table on the most significant
2508 nibble of the opcode.
2510 Sat Jan 18 15:15:05 1997 Fred Fish <fnf@cygnus.com>
2512 * tic80-dis.c (tic80_opcodes): Add "wrcr", "vmpy", "vrnd",
2513 "vsub", "vst", "xnor", and "xor" instructions.
2514 (V_a1): Renamed from V_a, msb of accumulator reg number.
2515 (V_a0): Add macro, lsb of accumulator reg number.
2517 Fri Jan 17 18:24:31 1997 Fred Fish <fnf@cygnus.com>
2519 * tic80-dis.c (print_insn_tic80): Broke excessively long
2520 function up into several smaller ones and arranged for
2521 the instruction printing function to be callable recursively
2522 to print vector instructions that have both a load and a
2523 math instruction packed into a single opcode.
2524 * tic80-opc.c (tic80_opcodes): Expand comment for vld opcode
2525 to explain why it comes after the other vector opcodes.
2527 Fri Jan 17 16:19:15 1997 J.T. Conklin <jtc@beauty.cygnus.com>
2529 * m68k-opc.c (m68k_opcodes): add b, w, or l specifier to coldfire
2530 move insns to handle immediate operands.
2532 Thu Jan 17 16:19:00 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2534 * m68k-opc.c (m68k_opcodes): Delete duplicate entry for "cmpil".
2535 fix operand mask in the "moveml" entries for the coldfire.
2537 Thu Jan 16 20:54:40 1997 Fred Fish <fnf@cygnus.com>
2539 * tic80-opc.c (V_a, V_m, V_S, V_Z, V_p, OP_V, MASK_V):
2540 New macros for building vector instruction opcodes.
2541 (tic80_opcodes): Remove all uses of FMT_SI, FMT_REG, and
2542 FMT_LI, which were unused. The field is now a flags field.
2543 Remove some opcodes that are possible, but illegal, such
2544 as long immediate instructions with doubles for immediate
2545 values. Add "vadd" and "vld" instructions.
2547 Wed Jan 15 18:59:51 1997 Fred Fish <fnf@cygnus.com>
2549 * tic80-opc.c (tic80_operands): Reorder some table entries to make
2550 the order more logical. Move the shift alias instructions ("rotl",
2551 "shl", "ins", "rotr", "extu", "exts", "srl", and "sra" to be
2552 interspersed with the regular sr.x and sl.x instructions. Add
2553 and test new instruction opcodes for "sl", "sli", "sr", "sri", "st",
2554 "sub", "subu", "swcr", and "trap".
2556 Tue Jan 14 19:42:50 1997 Fred Fish <fnf@cygnus.com>
2558 * tic80-opc.c (OFF_SS_PC): Renamed from OFF_SS.
2559 (OFF_SL_PC): Renamed from OFF_SL.
2560 (OFF_SS_BR): New operand type for base relative operand.
2561 (OFF_SL_BR): New operand type for base relative operand.
2562 (REG_BASE): New operand type for base register operand.
2563 (tic80_opcodes): Add and test "fmpy", "frndm", "frndn", "frndp",
2564 "frndz", "fsqrt", "fsub", "illop0", "illopF", "ins", "jsr",
2565 "ld", "ld.u", "lmo", "or", "rdcr", "rmo", "rotl", and "rotr"
2567 * tic80-dis.c (print_insn_tic80): Print opcode name with fixed width
2568 10 char field, padded with spaces on rhs, rather than a string
2569 followed by a tab. Use renamed TIC80_OPERAND_PCREL flag bit rather
2570 than old TIC80_OPERAND_RELATIVE. Add support for new
2571 TIC80_OPERAND_BASEREL flag bit.
2573 Mon Jan 13 15:58:56 1997 Fred Fish <fnf@cygnus.com>
2575 * tic80-dis.c (print_insn_tic80): Print floating point operands
2577 * tic80-opc.c (SPFI): Add single precision floating point
2578 immediate operand type.
2579 (ROTATE): Add rotate operand type for shifts.
2580 (ENDMASK): Add for shifts.
2581 (n): Macro for the 'n' bit.
2582 (i): Macro for the 'i' bit.
2583 (PD): Macro for the 'PD' field.
2584 (P2): Macro for the 'P2' field.
2585 (P1): Macro for the 'P1' field.
2586 (tic80_opcodes): Add entries for "exts", "extu", "fadd",
2589 Mon Jan 6 15:06:55 1997 Jeffrey A Law (law@cygnus.com)
2591 * mn10200-dis.c (disassemble): Mask off unwanted bits after
2592 adding in current address for pc-relative operands.
2594 Mon Jan 6 10:56:25 1997 Fred Fish <fnf@cygnus.com>
2596 * tic80-dis.c (R_SCALED): Add macro to test for ":s" modifier bit.
2597 (print_insn_tic80): If R_SCALED then print ":s" modifier for operand.
2598 * tic80-opc.c (REG0, REG22, REG27, SSOFF, LSOFF): Names
2599 changed to REG_0, REG_22, REG_DEST, OFF_SS, OFF_SL respectively.
2600 (SICR, LICR, REGM_SI, REGM_LI): Names changed to CR_SI, CR_LI,
2601 REG_BASE_M_SI, REG_BASE_M_LI respectively.
2602 (REG_SCALED, LSI_SCALED): New operand types.
2603 (E): New macro for 'E' bit at bit 27.
2604 (tic80_opcodes): Add and test dld, dld.u, dst, estop, and etrap
2605 opcodes, including the various size flavors (b,h,w,d) for
2606 the direct load and store instructions.
2608 Sun Jan 5 12:18:14 1997 Fred Fish <fnf@cygnus.com>
2610 * tic80-dis.c (M_SI, M_LI): Add macros to test for ":m" modifier bit
2612 * tic80-dis.c (print_insn_tic80): Change comma and paren handling.
2613 Use M_SI and M_LI macros to check for ":m" modifier for GPR operands.
2614 * tic80-opc.c (tic80_operands): Add REGM_SI and REGM_LI operands.
2615 (F, M_REG, M_LI, M_SI, SZ_REG, SZ_LI, SZ_SI, D, S): New bit-twiddlers.
2616 (MASK_LI_M, MASK_SI_M, MASK_REG_M): Remove and replace in opcode
2617 masks with "MASK_* & ~M_*" to get the M bit reset.
2618 (tic80_opcodes): Add bsr, bsr.a, cmnd, cmp, dcachec, and dcachef.
2620 Sat Jan 4 19:05:05 1997 Fred Fish <fnf@cygnus.com>
2622 * tic80-dis.c (print_insn_tic80): Print TIC80_OPERAND_RELATIVE
2623 correctly. Add support for printing TIC80_OPERAND_BITNUM and
2624 TIC80_OPERAND_CC, and TIC80_OPERAND_CR operands in symbolic
2626 * tic80-opc.c (tic80_operands): Add SSOFF, LSOFF, BITNUM,
2627 CC, SICR, and LICR table entries.
2628 (tic80_opcodes): Add and test "nop", "br", "bbo", "bbz",
2629 "bcnd", and "brcr" opcodes.
2631 Fri Jan 3 18:32:11 1997 Fred Fish <fnf@cygnus.com>
2633 * ppc-opc.c (powerpc_operands): Make comment match the
2634 actual fields (no shift field).
2635 * sparc-opc.c (sparc_opcodes): Document why this cannot be "const".
2636 * tic80-dis.c (print_insn_tic80): Replace abort stub with a
2637 partial implementation, work in progress.
2638 * tic80-opc.c (tic80_operands): Begin construction operands table.
2639 (tic80_opcodes): Continue populating opcodes table and start
2640 filling in the operand indices.
2641 (tic80_num_opcodes): Add this.
2643 Fri Jan 3 12:13:52 1997 Ian Lance Taylor <ian@cygnus.com>
2645 * m68k-opc.c: Add #B case for moveq.
2647 Thu Jan 2 12:14:29 1997 Jeffrey A Law (law@cygnus.com)
2649 * mn10300-dis.c (disassemble): Make sure all variables are initialized
2650 before they are used.
2652 Tue Dec 31 12:20:38 1996 Jeffrey A Law (law@cygnus.com)
2654 * v850-opc.c (v850_opcodes): Put curly-braces around operands
2655 for "breakpoint" instruction.
2657 Tue Dec 31 15:38:13 1996 Ian Lance Taylor <ian@cygnus.com>
2659 * Makefile.in (ALL_CFLAGS): Add -D_GNU_SOURCE.
2660 (dep): Use ALL_CFLAGS rather than CFLAGS.
2662 Tue Dec 31 15:09:16 1996 Michael Meissner <meissner@tiktok.cygnus.com>
2664 * v850-opc.c (D8_{6,7}): Set V850_OPERAND_ADJUST_SHORT_MEMORY
2667 Mon Dec 30 17:02:11 1996 Fred Fish <fnf@cygnus.com>
2669 * Makefile.in (m68k-opc.o, alpha-opc.o): Remove dis-asm.h dependency.
2670 (tic80-dis.o, tic80-opc.o): Add rules per comment in Makefile.in.
2672 Mon Dec 30 11:38:01 1996 Ian Lance Taylor <ian@cygnus.com>
2674 * mips16-opc.c: Add "abs".
2676 Sun Dec 29 10:58:22 1996 Fred Fish <fnf@cygnus.com>
2678 * Makefile.in (ALL_MACHINES): Add tic80-dis.o and tic80-opc.o.
2679 * disassemble.c (ARCH_tic80): Define if ARCH_all is defined.
2680 (disassembler): Add bfd_arch_tic80 support to set disassemble
2681 to print_insn_tic80.
2682 * tic80-dis.c (print_insn_tic80): Add stub.
2684 Fri Dec 27 22:30:57 1996 Fred Fish <fnf@cygnus.com>
2686 * configure.in (arch in $selarchs): Add bfd_tic80_arch entry.
2687 * configure: Regenerate with autoconf.
2688 * tic80-dis.c: Add file.
2689 * tic80-opc.c: Add file.
2691 Fri Dec 20 14:30:19 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2693 * d10v-opc.c (pre_defined_registers): Add cr[0-15], dpc, dpsw, link.
2695 Mon Dec 16 13:00:15 1996 Jeffrey A Law (law@cygnus.com)
2697 * mn10200-opc.c (mn10200_operands): Add SIMM16N.
2698 (mn10200_opcodes): Use it for some logicals and btst insns.
2699 Add "break" and "trap" instructions.
2701 * mn10300-opc.c (mn10300_opcodes): Add "break" instruction.
2703 * mn10200-opc.c: Add pseudo-ops for "mov (an),am" and "mov an,(am)".
2705 Sat Dec 14 22:36:20 1996 Ian Lance Taylor <ian@cygnus.com>
2707 * mips-dis.c (print_mips16_insn_arg): The base address of a PC
2708 relative load or add now depends upon whether the instruction is
2711 Wed Dec 11 09:23:46 1996 Jeffrey A Law (law@cygnus.com)
2713 * mn10200-dis.c: Finish writing disassembler.
2714 * mn10200-opc.c (mn10200_opcodes): Fix mask for "mov imm8,dn".
2715 Fix mask for "jmp (an)".
2717 * mn10300-dis.c (disassemble, print_insn_mn10300): Corrently
2718 handle endianness issues for mn10300.
2720 * mn10200-opc.c (mn10200_opcodes): Fix operands for "movb dm,(an)".
2722 Tue Dec 10 12:08:05 1996 Jeffrey A Law (law@cygnus.com)
2724 * mn10200-opc.c (mn10200_opcodes): "mov imm8,d0" is a format 2
2725 instruction. Fix opcode field for "movb (imm24),dn".
2727 * mn10200-opc.c (mn10200_operands): Fix insertion position
2730 Mon Dec 9 16:42:43 1996 Jeffrey A Law (law@cygnus.com)
2732 * mn10200-opc.c: Create mn10200 opcode table.
2733 * mn10200-dis.c: Flesh out mn10200 disassembler. Not ready,
2734 but moving along nicely.
2736 Sun Dec 8 04:28:31 1996 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2738 * Makefile.in (ALL_MACHINES): Add mips16-opc.o.
2740 Fri Dec 6 16:47:40 1996 J.T. Conklin <jtc@rhino.cygnus.com>
2742 * m68k-opc.c (m68k_opcodes): Revert change to use < and >
2743 specifiers for fmovem* instructions.
2745 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
2747 * mn10300-dis.c (disassemble): Remove '$' register prefixing.
2749 Fri Dec 6 17:34:39 1996 Ian Lance Taylor <ian@cygnus.com>
2751 * mips16-opc.c: Change opcode for entry/exit to avoid conflicting
2754 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
2756 * mn10300-opc.c: Add some comments explaining the various
2759 * mn10300-dis.c (disassemble): Fix minor gcc -Wall warnings.
2761 Thu Dec 5 12:09:48 1996 J.T. Conklin <jtc@rtl.cygnus.com>
2763 * m68k-dis.c (print_insn_arg): Handle new < and > operand
2766 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
2767 operand specifiers in fmovm* instructions.
2769 Wed Dec 4 14:52:18 1996 Ian Lance Taylor <ian@cygnus.com>
2771 * ppc-opc.c (insert_li): Give an error if the offset has the two
2772 least significant bits set.
2774 Wed Nov 27 13:09:01 1996 Ian Lance Taylor <ian@cygnus.com>
2776 * mips-dis.c (print_insn_mips16): Separate the instruction from
2777 the arguments with a tab, not a space.
2779 Tue Nov 26 13:24:17 1996 Jeffrey A Law (law@cygnus.com)
2781 * mn10300-dis.c (disasemble): Finish conversion to '$' as
2784 * mn10300-opc.c (mn10300_opcodes): Fix mask field for
2787 Tue Nov 26 10:53:21 1996 Ian Lance Taylor <ian@cygnus.com>
2789 * configure: Rebuild with autoconf 2.12.
2791 Add support for mips16 (16 bit MIPS implementation):
2792 * mips16-opc.c: New file.
2793 * mips-dis.c: Include "elf-bfd.h" and "elf/mips.h".
2794 (mips16_reg_names): New static array.
2795 (print_insn_big_mips): Use print_insn_mips16 in 16 bit mode or
2796 after seeing a 16 bit symbol.
2797 (print_insn_little_mips): Likewise.
2798 (print_insn_mips16): New static function.
2799 (print_mips16_insn_arg): New static function.
2800 * mips-opc.c: Add jalx instruction.
2801 * Makefile.in (mips16-opc.o): New target.
2802 * configure.in: Use mips16-opc.o for bfd_mips_arch.
2803 * configure: Rebuild.
2805 Mon Nov 25 16:15:17 1996 J.T. Conklin <jtc@cygnus.com>
2807 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
2808 operand specifiers in *save, *restore and movem* instructions.
2810 * m68k-opc.c (m68k_opcodes): Fix move and movem instructions for
2813 * m68k-opc.c (m68k_opcodes): The coldfire (mcf5200) can only use
2814 register operands for immediate arithmetic, not, neg, negx, and
2815 set according to condition instructions.
2817 * m68k-opc.c (m68k_opcodes): Consistantly Use "s" as the storage
2818 specifier of the effective-address operand in immediate forms of
2819 arithmetic instructions. The specifier for the immediate operand
2820 notes how and where the constant will be stored.
2822 Mon Nov 25 11:17:01 1996 Jeffrey A Law (law@cygnus.com)
2824 * mn10300-opc.c (mn10300_opcodes): Remove redundant "lcc"
2827 * mn10300-dis.c (disassemble): Use '$' instead of '%' for
2830 * mn10300-dis.c (disassemble): Prefix registers with '%'.
2832 Wed Nov 20 10:37:13 1996 Jeffrey A Law (law@cygnus.com)
2834 * mn10300-dis.c (disassemble): Handle register lists.
2836 * mn10300-opc.c: Fix handling of register list operand for
2837 "call", "ret", and "rets" instructions.
2839 * mn10300-dis.c (disassemble): Print PC-relative and memory
2840 addresses symbolically if possible.
2841 * mn10300-opc.c: Distinguish between absolute memory addresses,
2842 pc-relative offsets & random immediates.
2844 * mn10300-dis.c (print_insn_mn10300): Fix fetch of last byte
2846 (disassemble): Handle SPLIT and EXTENDED operands.
2848 Tue Nov 19 13:33:01 1996 Jeffrey A Law (law@cygnus.com)
2850 * mn10300-dis.c: Rough cut at printing some operands.
2852 * mn10300-dis.c: Start working on disassembler support.
2853 * mn10300-opc.c (mn10300_opcodes): Fix masks on several insns.
2855 * mn10300-opc.c (mn10300_operands): Add "REGS" for a register
2857 (mn10300_opcodes): Use REGS for register list in "movm" instructions.
2859 Mon Nov 18 15:20:35 1996 Michael Meissner <meissner@tiktok.cygnus.com>
2861 * d10v-opc.c (d10v_opcodes): Add3 sets the carry.
2863 Fri Nov 15 13:43:19 1996 Jeffrey A Law (law@cygnus.com)
2865 * mn10300-opc.c (mn10300_opcodes): Demand parens around
2866 register argument is calls and jmp instructions.
2868 Thu Nov 7 00:26:05 1996 Jeffrey A Law (law@cygnus.com)
2870 * mn10300-opc.c (mn10300_opcodes): Use DN01 for putx and
2871 getx operand. Fix opcode for mulqu imm,dn.
2873 Wed Nov 6 13:42:32 1996 Jeffrey A Law (law@cygnus.com)
2875 * mn10300-opc.c (mn10300_operands): Hijack "bits" field
2876 in MN10300_OPERAND_SPLIT operands for how many bits
2877 appear in the basic insn word. Add IMM32_HIGH24,
2878 IMM32_HIGH24_LOWSHIFT8, IMM8E_SHIFT8.
2879 (mn10300_opcodes): Use new operands as needed.
2881 * mn10300-opc.c (mn10300_operands): Add IMM32_LOWSHIFT8
2882 for bset, bclr, btst instructions.
2883 (mn10300_opcodes): Use new IMM32_LOWSHIFT8 as needed.
2885 * mn10300-opc.c (mn10300_operands): Remove many redundant
2886 operands. Update opcode table as appropriate.
2887 (IMM32): Add MN10300_OPERAND_SPLIT flag.
2888 (mn10300_opcodes): Fix single bit error in mov imm32,dn insn.
2890 Tue Nov 5 13:26:58 1996 Jeffrey A Law (law@cygnus.com)
2892 * mn10300-opc.c (mn10300_operands): Add DN2, DM2, AN2, AM2
2893 operands (for indexed load/stores). Fix bitpos for DI
2894 operand. Add SN8N_SHIFT8, IMM8_SHIFT8, and D16_SHIFT for the
2895 few instructions that insert immediates/displacements in the
2896 middle of the instruction. Add IMM8E for 8 bit immediate in
2897 the extended part of an instruction.
2898 (mn10300_operands): Use new opcodes as appropriate.
2900 Tue Nov 5 10:30:51 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2902 * d10v-opc.c (d10v_opcodes): Declare the trap instruction
2903 sequential so the assembler never parallelizes it with
2906 Mon Nov 4 12:50:40 1996 Jeffrey A Law (law@cygnus.com)
2908 * mn10300-opc.c (mn10300_operands): Add DN01 and AN01 for
2909 a data/address register that appears in register field 0
2910 and register field 1.
2911 (mn10300_opcodes): Use DN01 and AN01 for mov/cmp imm8,DN/AN
2913 Fri Nov 1 10:29:11 1996 Richard Henderson <rth@tamu.edu>
2915 * alpha-dis.c (print_insn_alpha): Use new NOPAL mask for
2916 standard disassembly.
2918 * alpha-opc.c (alpha_operands): Rearrange flags slot.
2919 (alpha_opcodes): Add new BWX, CIX, and MAX instructions.
2920 Recategorize PALcode instructions.
2922 Wed Oct 30 16:46:58 1996 Jeffrey A Law (law@cygnus.com)
2924 * v850-opc.c (v850_opcodes): Add relaxing "jbr".
2926 Tue Oct 29 16:30:28 1996 Ian Lance Taylor <ian@cygnus.com>
2928 * mips-dis.c (_print_insn_mips): Don't print a trailing tab if
2929 there are no operand types.
2931 Tue Oct 29 12:22:21 1996 Jeffrey A Law (law@cygnus.com)
2933 * v850-opc.c (D9_RELAX): Renamed from D9, all references
2935 (v850_operands): Make sure D22 immediately follows D9_RELAX.
2937 Fri Oct 25 12:12:53 1996 Ian Lance Taylor <ian@cygnus.com>
2939 * i386-dis.c (print_insn_x86): Set info->bytes_per_line to 5.
2941 Thu Oct 24 17:53:52 1996 Jeffrey A Law (law@cygnus.com)
2943 * v850-opc.c (insert_d8_6): Fix operand insertion for sld.w
2944 and sst.w instructions.
2946 * v850-opc.c (v850_opcodes): Add "jCC" instructions (aliases for
2949 Thu Oct 24 17:21:20 1996 Ian Lance Taylor <ian@cygnus.com>
2951 * mips-dis.c (_print_insn_mips): Use a tab between the instruction
2954 Tue Oct 22 23:32:56 1996 Ian Lance Taylor <ian@cygnus.com>
2956 * ppc-opc.c (PPCPWR2): Define.
2957 (powerpc_opcodes): Use PPCPWR2 for fsqrt, rather than duplicating
2960 Fri Oct 11 16:03:49 1996 Jeffrey A Law (law@cygnus.com)
2962 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode
2963 field for movhu instruction.
2965 * v850-dis.c (disassemble): For V850_OPERAND_SIGNED operands,
2966 cast value to "long" not "signed long" to keep hpux10
2969 Thu Oct 10 10:25:58 1996 Jeffrey A Law (law@cygnus.com)
2971 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode field
2974 * mn10300-opc.c (FMT*): Remove definitions.
2976 * mn10300-opc.c (mn10300_opcodes): Fix destination register
2977 for shift-by-register opcodes.
2979 * mn10300-opc.c (mn10300_operands): Break DN, DM, AN, AM
2980 into [AD][MN][01] for encoding the position of the register
2983 Wed Oct 9 11:19:26 1996 Jeffrey A Law (law@cygnus.com)
2985 * mn10300-opc.c (mn10300_opcodes): Add "extended" instructions,
2986 "putx", "getx", "mulq", "mulqu", "sat16", "sat24", "bsch".
2988 Tue Oct 8 11:55:35 1996 Jeffrey A Law (law@cygnus.com)
2990 * mn10300-opc.c (mn10300_operands): Remove "REGS" operand.
2991 Fix various typos. Add "PAREN" operand.
2992 (MEM, MEM2): Define.
2993 (mn10300_opcodes): Surround all memory addresses with "PAREN"
2994 operands. Fix several typos.
2996 * mn10300-opc.c (mn10300_opcodes): Fix typos in yesterday's
2999 Mon Oct 7 16:48:45 1996 Jeffrey A Law (law@cygnus.com)
3001 * mn10300-opc.c (FMT_XX): Renumber starting at one.
3002 (mn10300_operands): Rough cut. Enough to parse "mov" instructions
3004 (mn10300_opcodes): Break opcode format out into its own field.
3005 Update many operand fields to deal with signed vs unsigned
3006 issues. Fix one or two typos in the "mov" instruction
3007 opcode, mask and/or operand fields.
3009 Mon Oct 7 11:39:49 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
3011 * m68k-opc.c (plusha): Prefer encoding for m68040up, in case
3012 m68851 wasn't reset.
3014 Thu Oct 3 17:17:02 1996 Ian Lance Taylor <ian@cygnus.com>
3016 * mn10300-opc.c (mn10300_opcodes): Add opcode & masks for
3017 all opcodes. Very rough cut at operands for all opcodes.
3019 * mn10300-opc.c (mn10300_opcodes): Start fleshing out the
3022 Thu Oct 3 10:06:07 1996 Jeffrey A Law (law@cygnus.com)
3024 * mn10200-opc.c, mn10300-opc.c: New files.
3025 * mn10200-dis.c, mn10300-dis.c: New files.
3026 * mn10x00-opc.c, mn10x00-dis.c: Deleted.
3027 * disassemble.c: Break mn10x00 support into 10200 and 10300
3029 * configure.in: Likewise.
3030 * configure: Rebuilt.
3032 Thu Oct 3 15:59:12 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
3034 * Makefile.in (MOSTLYCLEAN): Move config.log to distclean.
3036 Wed Oct 2 23:28:42 1996 Jeffrey A Law (law@cygnus.com)
3038 * mn10x00-opc.c, mn10x00-dis.c: New files for Matsushita
3040 * disassemble (ARCH_mn10x00): Define.
3041 (disassembler): Handle bfd_arch_mn10x00.
3042 * configure.in: Recognize bfd_mn10x00_arch.
3043 * configure: Rebuilt.
3045 Tue Oct 1 10:49:11 1996 Ian Lance Taylor <ian@cygnus.com>
3047 * i386-dis.c (op_rtn): Change to be a pointer. Adjust uses
3048 accordingly. Don't declare functions using op_rtn.
3050 Fri Sep 27 18:28:59 1996 Stu Grossman (grossman@critters.cygnus.com)
3052 * v850-dis.c (disassemble): Add memaddr argument. Re-arrange
3053 params to be more standard.
3054 * (disassemble): Print absolute addresses and symbolic names for
3055 branch and jump targets.
3056 * v850-opc.c (v850_operand): Add displacement flag to 9 and 22
3058 * (v850_opcodes): Add breakpoint insn.
3060 Mon Sep 23 12:32:26 1996 Ian Lance Taylor <ian@cygnus.com>
3062 * m68k-opc.c: Move the fmovemx data register cases before the
3063 other cases, so that they get recognized before the data register
3064 does gets treated as a degenerate register list.
3066 Tue Sep 17 12:06:51 1996 Ian Lance Taylor <ian@cygnus.com>
3068 * mips-opc.c: Add a case for "div" and "divu" with two registers
3069 and a destination of $0.
3071 Tue Sep 10 16:12:39 1996 Fred Fish <fnf@rtl.cygnus.com>
3073 * mips-dis.c (print_insn_arg): Add prototype.
3074 (_print_insn_mips): Ditto.
3076 Mon Sep 9 14:26:26 1996 Ian Lance Taylor <ian@cygnus.com>
3078 * mips-dis.c (print_insn_arg): Print condition code registers as
3081 Tue Sep 3 12:09:46 1996 Doug Evans <dje@canuck.cygnus.com>
3083 * sparc-opc.c (sparc_opcodes): Add setuw, setsw, setx.
3085 Tue Sep 3 12:05:25 1996 Jeffrey A Law (law@cygnus.com)
3087 * v850-dis.c (disassemble): Make static. Provide prototype.
3089 Sun Sep 1 22:30:40 1996 Jeffrey A Law (law@cygnus.com)
3091 * v850-opc.c (insert_d9, insert_d22): Fix boundary case
3094 Sat Aug 31 01:27:26 1996 Jeffrey A Law (law@cygnus.com)
3096 * v850-dis.c (disassemble): Handle insertion of ',', '[' and
3097 ']' characters into the output stream.
3098 * v850-opc.c (v850_opcodes: Remove size field from all opcodes.
3099 Add "memop" field to all opcodes (for the disassembler).
3100 Reorder opcodes so that "nop" comes before "mov" and "jr"
3101 comes before "jarl".
3103 * v850-dis.c (print_insn_v850): Fix typo in last change.
3105 * v850-dis.c (print_insn_v850): Properly handle disassembling
3106 a two byte insn at the end of a memory region when the memory
3107 region's size is only two byte aligned.
3109 * v850-dis.c (v850_cc_names): Fix stupid thinkos.
3111 * v850-dis.c (v850_reg_names): Define.
3112 (v850_sreg_names, v850_cc_names): Likewise.
3113 (disassemble): Very rough cut at printing operands (unformatted).
3115 * v850-opc.c (BOP_MASK): Fix.
3116 (v850_opcodes): Fix mask for jarl and jr.
3118 * v850-dis.c: New file. Skeleton for disassembler support.
3119 * Makefile.in Remove v850 references, they're not needed here.
3120 * configure.in: Add v850-dis.o when building v850 toolchains.
3121 * configure: Rebuilt.
3122 * disassemble.c (disassembler): Call v850 disassembler.
3124 * v850-opc.c (insert_d8_7, extract_d8_7): New functions.
3125 (insert_d8_6, extract_d8_6): New functions.
3126 (v850_operands): Rename D7S to D7; operand for D7 is unsigned.
3127 Rename D8 to D8_7, use {insert,extract}_d8_7 routines.
3129 (IF4A, IF4B): Use "D7" instead of "D7S".
3130 (IF4C, IF4D): Use "D8_7" instead of "D8".
3131 (IF4E, IF4F): New. Use "D8_6".
3132 (v850_opcodes): Use IF4A/IF4B for sld.b/sst.b. Use IF4C/IF4D for
3133 sld.h/sst.h. Use IF4E/IF4F for sld.w/sst.w.
3135 * v850-opc.c (insert_d16_15, extract_d16_15): New functions.
3136 (v850_operands): Change D16 to D16_15, use special insert/extract
3137 routines. New new D16 that uses the generic insert/extract code.
3138 (IF7A, IF7B): Use D16_15.
3139 (IF7C, IF7D): New. Use D16.
3140 (v850_opcodes): Use IF7C and IF7D for ld.b and st.b.
3142 * v850-opc.c (insert_d9, insert_d22): Slightly improve error
3143 message. Issue an error if the branch offset is odd.
3145 * v850-opc.c: Add notes about needing special insert/extract
3146 for all the load/store insns, except "ld.b" and "st.b".
3148 * v850-opc.c (insert_d22, extract_d22): New functions.
3149 (v850_operands): Use insert_d22 and extract_d22 for
3151 (insert_d9): Fix range check.
3153 Fri Aug 30 18:01:02 1996 J.T. Conklin <jtc@hippo.cygnus.com>
3155 * v850-opc.c (v850_operands): Add V850_OPERAND_SIGNED flag
3156 and set bits field to D9 and D22 operands.
3158 Thu Aug 29 11:10:46 1996 Jeffrey A Law (law@cygnus.com)
3160 * v850-opc.c (v850_operands): Define SR2 operand.
3161 (v850_opcodes): "ldsr" uses R1,SR2.
3163 * v850-opc.c (v850_opcodes): Fix opcode specs for
3164 sld.w, sst.b, sst.h, sst.w, and nop.
3166 Wed Aug 28 15:55:43 1996 Jeffrey A Law (law@cygnus.com)
3168 * v850-opc.c (v850_opcodes): Add null opcode to mark the
3169 end of the opcode table.
3171 Mon Aug 26 13:35:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3173 * d10v-opc.c (pre_defined_registers): Added register pairs,
3174 "r0-r1", "r2-r3", etc.
3176 Fri Aug 23 00:27:01 1996 Jeffrey A Law (law@cygnus.com)
3178 * v850-opc.c (v850_operands): Make I16 be a signed operand.
3179 Create I16U for an unsigned 16bit mmediate operand.
3180 (v850_opcodes): Use I16U for "ori", "andi" and "xori".
3182 * v850-opc.c (v850_operands): Define EP operand.
3183 (IF4A, IF4B, IF4C, IF4D): Use EP.
3185 * v850-opc.c (v850_opcodes): Fix opcode numbers for "mov"
3186 with immediate operand, "movhi". Tweak "ldsr".
3188 * v850-opc.c (v850_opcodes): Get ld.[bhw] and st.[bhw]
3189 correct. Get sld.[bhw] and sst.[bhw] closer.
3191 * v850-opc.c (v850_operands): "not" is a two byte insn
3193 * v850-opc.c (v850_opcodes): Correct bit pattern for setf.
3195 * v850-opc.c (v850_operands): D16 inserts at offset 16!
3197 * v850-opc.c (two): Get order of words correct.
3199 * v850-opc.c (v850_operands): I16 inserts at offset 16!
3201 * v850-opc.c (v850_operands): Add "SR1" and "SR2" for system
3202 register source and destination operands.
3203 (v850_opcodes): Use SR1 and SR2 for "ldsr" and "stsr".
3205 * v850-opc.c (v850_opcodes): Fix thinko in "jmp" opcode. Fix
3206 same thinko in "trap" opcode.
3208 * v850-opc.c (v850_opcodes): Add initializer for size field
3211 * v850-opc.c (v850_operands): D6 -> DS7. References changed.
3212 Add D8 for 8-bit unsigned field in short load/store insns.
3213 (IF4A, IF4D): These both need two registers.
3214 (IF4C, IF4D): Define. Use 8-bit unsigned field.
3215 (v850_opcodes): For "sld.h", "sld.w", "sst.h", "sst.w", use
3216 IF4C & IF4D. For "trap" use I5U, not I5. Add IF1 operand
3217 for "ldsr" and "stsr".
3218 * v850-opc.c (v850_operands): 3-bit immediate for bit insns
3221 * v850-opc.c (v850_opcodes): Correct short store half (sst.h) and
3222 short store word (sst.w).
3224 Thu Aug 22 16:57:27 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3226 * v850-opc.c (v850_operands): Added insert and extract fields,
3227 pointers to functions that handle unusual operand encodings.
3229 Thu Aug 22 01:05:24 1996 Jeffrey A Law (law@cygnus.com)
3231 * v850-opc.c (v850_opcodes): Enable "trap".
3233 * v850-opc.c (v850_opcodes): Fix order of displacement
3234 and register for "set1", "clr1", "not1", and "tst1".
3236 Wed Aug 21 18:46:26 1996 Jeffrey A Law (law@cygnus.com)
3238 * v850-opc.c (v850_operands): Add "B3" support.
3239 (v850_opcodes): Fix and enable "set1", "clr1", "not1"
3242 * v850-opc.c (v850_opcodes): "jmp" has only an R1 operand.
3244 * v850-opc.c: Close unterminated comment.
3246 Wed Aug 21 17:31:26 1996 J.T. Conklin <jtc@hippo.cygnus.com>
3248 * v850-opc.c (v850_operands): Add flags field.
3249 (v850_opcodes): add move opcodes.
3251 Tue Aug 20 14:41:03 1996 J.T. Conklin <jtc@hippo.cygnus.com>
3253 * Makefile.in (ALL_MACHINES): Add v850-opc.o.
3254 * configure: (bfd_v850v_arch) Add new case.
3255 * configure.in: (bfd_v850_arch) Add new case.
3256 * v850-opc.c: New file.
3258 Mon Aug 19 15:21:38 1996 Doug Evans <dje@canuck.cygnus.com>
3260 * sparc-dis.c (print_insn_sparc): Handle little endian sparcs.
3262 Thu Aug 15 13:14:43 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3264 * d10v-opc.c: Add additional information to the opcode
3265 table to help determinine which instructions can be done
3268 Thu Aug 15 13:11:13 1996 Stan Shebs <shebs@andros.cygnus.com>
3270 * mpw-make.sed: Update editing of include pathnames to be
3273 Thu Aug 15 16:28:41 1996 James G. Smith <jsmith@cygnus.co.uk>
3275 * arm-opc.h: Added "bx" instruction definition.
3277 Wed Aug 14 17:00:04 1996 Richard Henderson <rth@tamu.edu>
3279 * alpha-opc.c (EV4EXTHWINDEX): Field width should be 8 not 5.
3281 Mon Aug 12 14:30:37 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3283 * d10v-opc.c (d10v_opcodes): Minor fixes to addi and bl.l.
3285 Fri Aug 9 13:21:59 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3287 * d10v-opc.c (d10v_opcodes): Correct 'mv' unit entry to EITHER.
3289 Thu Aug 8 12:43:52 1996 Klaus Kaempf <kkaempf@progis.de>
3291 * makefile.vms: Update for alpha-opc changes.
3293 Wed Aug 7 11:55:10 1996 Ian Lance Taylor <ian@cygnus.com>
3295 * i386-dis.c (print_insn_i386): Actually return the correct value.
3296 (ONE, OP_ONE): #ifdef out; not used.
3298 Fri Aug 2 17:47:03 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3300 * d10v-opc.c (d10v_opcodes): Added 2 accumulator sub instructions.
3301 Changed subi operand type to treat 0 as 16.
3303 Wed Jul 31 16:21:41 1996 Ian Lance Taylor <ian@cygnus.com>
3305 * m68k-opc.c: Add cpushl for the mcf5200. From Ken Rose
3308 Wed Jul 31 14:39:27 1996 James G. Smith <jsmith@cygnus.co.uk>
3310 * arm-opc.h: (arm_opcodes): Added halfword and sign-extension
3311 memory transfer instructions. Add new format string entries %h and %s.
3312 * arm-dis.c: (print_insn_arm): Provide decoding of the new
3315 Fri Jul 26 11:45:04 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3317 * d10v-opc.c (d10v_operands): Added UNUM4S; a 4-bit accumulator shift.
3318 (d10v_opcodes): Modified accumulator shift instructions to use UNUM4S.
3320 Fri Jul 26 14:01:43 1996 Ian Lance Taylor <ian@cygnus.com>
3322 * alpha-dis.c (print_insn_alpha_osf): Remove.
3323 (print_insn_alpha_vms): Remove.
3324 (print_insn_alpha): Make globally visible. Chose the register
3325 names based on info->flavour.
3326 * disassemble.c: Always return print_insn_alpha for the alpha.
3328 Thu Jul 25 15:24:17 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3330 * d10v-dis.c (dis_long): Handle unknown opcodes.
3332 Thu Jul 25 12:08:09 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3334 * d10v-opc.c: Changes to support signed and unsigned numbers.
3335 All instructions with the same name that have long and short forms
3336 now end in ".l" or ".s". Divs added.
3337 * d10v-dis.c: Changes to support signed and unsigned numbers.
3339 Tue Jul 23 11:02:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3341 * d10v-dis.c: Change all functions to use info->print_address_func.
3343 Mon Jul 22 15:38:53 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
3345 * m68k-opc.c (m68k_opcodes): Make opcode masks for the ColdFire
3346 move ccr/sr insns more strict so that the disassembler only
3347 selects them when the addressing mode is data register.
3349 Mon Jul 22 11:25:24 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3350 * d10v-opc.c (pre_defined_registers): Declare.
3351 * d10v-dis.c (print_operand): Now uses pre_defined_registers
3352 to pick a better name for the registers.
3354 Mon Jul 22 13:47:23 1996 Ian Lance Taylor <ian@cygnus.com>
3356 * sparc-opc.c: Fix opcode values for fpack16, and fpackfix. Fix
3357 operands for fexpand and fpmerge. From Christian Kuehnke
3358 <Christian.Kuehnke@arbi.informatik.uni-oldenburg.de>.
3360 Mon Jul 22 13:17:06 1996 Richard Henderson <rth@tamu.edu>
3362 * alpha-dis.c (print_insn_alpha): No longer the user-visible
3363 print routine. Take new regnames and cpumask arguments.
3364 Kill the environment variable nonsense.
3365 (print_insn_alpha_osf): New function. Do OSF/1 style regnames.
3366 (print_insn_alpha_vms): New function. Do VMS style regnames.
3367 * disassemble.c (disassembler): Test bfd flavour to pick
3368 between OSF and VMS routines. Default to OSF.
3370 Thu Jul 18 17:19:34 1996 Ian Lance Taylor <ian@cygnus.com>
3372 * configure.in: Call AC_SUBST (INSTALL_SHLIB).
3373 * configure: Rebuild.
3374 * Makefile.in (install): Use @INSTALL_SHLIB@.
3376 Wed Jul 17 14:39:05 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3378 * configure: (bfd_d10v_arch) Add new case.
3379 * configure.in: (bfd_d10v_arch) Add new case.
3380 * d10v-dis.c: New file.
3381 * d10v-opc.c: New file.
3382 * disassemble.c (disassembler) Add entry for d10v.
3384 Wed Jul 17 10:12:05 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3386 * m68k-opc.c (m68k_opcodes): Fix bugs in coldfire insns relating
3387 to bcc, trapfl, subxl, and wddata discovered by Andreas Schwab.
3389 Mon Jul 15 16:59:55 1996 Stu Grossman (grossman@critters.cygnus.com)
3391 * i386-dis.c: Get rid of print_insn_i8086. Use info.mach to
3392 distinguish between variants of the instruction set.
3393 * sparc-dis.c: Get rid of print_insn_sparclite. Use info.mach to
3394 distinguish between variants of the instruction set.
3396 Fri Jul 12 10:12:01 1996 Stu Grossman (grossman@critters.cygnus.com)
3398 * i386-dis.c (print_insn_i8086): New routine to disassemble using
3399 the 8086 instruction set.
3400 * i386-dis.c: General cleanups. Make most things static. Add
3401 prototypes. Get rid of static variables aflags and dflags. Pass
3402 them as args (to almost everything).
3404 Thu Jul 11 11:58:44 1996 Jeffrey A Law (law@cygnus.com)
3406 * h8300-dis.c (bfd_h8_disassemble): Handle macregs in ldmac insns.
3408 * h8300-dis.c (bfd_h8_disassemble): Handle "ldm.l" and "stm.l".
3410 * h8300-dis.c (bfd_h8_disassemble): "abs" is implicitly two
3411 if the next arg is marked with SRC_IN_DST. Gross.
3413 * h8300-dis.c (bfd_h8_disassemble): Print "exr" when
3414 we're looking for and find EXR.
3416 * h8300-dis.c (bfd_h8_disassemble): We don't have a match
3417 if we're looking for KBIT and we don't find it.
3419 * h8300-dis.c (bfd_h8_disassemble): Mask off unwanted bits
3422 * h8300-dis.c (bfd_h8_disassemble): Don't set plen for
3423 3bit immediate operands.
3425 Tue Jul 9 10:55:20 1996 Ian Lance Taylor <ian@cygnus.com>
3427 * Released binutils 2.7.
3429 * alpha-opc.c: Add new case of "mov". From Klaus Kaempf
3430 <kkaempf@progis.ac-net.de>.
3432 Thu Jul 4 11:42:51 1996 Ian Lance Taylor <ian@cygnus.com>
3434 * alpha-opc.c: Correct second case of "mov" to use OPRL.
3436 Wed Jul 3 16:03:47 1996 Stu Grossman (grossman@critters.cygnus.com)
3438 * sparc-dis.c (print_insn_sparclite): New routine to print
3439 sparclite instructions.
3441 Wed Jul 3 14:21:18 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3443 * m68k-opc.c (m68k_opcodes): Add coldfire support.
3445 Fri Jun 28 15:53:51 1996 Doug Evans <dje@canuck.cygnus.com>
3447 * sparc-opc.c (asi_table): Add #ASI_N, #ASI_N_L, #ASI_NUCLEUS,
3448 #ASI_NUCLEUS_LITTLE. Rename #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_L
3449 to #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_LITTLE.
3451 Tue Jun 25 22:58:31 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
3453 * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir):
3454 Use autoconf-set values.
3455 (docdir, oldincludedir): Removed.
3456 * configure.in (AC_PREREQ): autoconf 2.5 or higher.
3458 Fri Jun 21 13:53:36 1996 Richard Henderson <rth@tamu.edu>
3460 * alpha-opc.c: New file.
3461 * alpha-opc.h: Remove.
3462 * alpha-dis.c: Complete rewrite to use new opcode table.
3463 * configure.in: For bfd_alpha_arch, use alpha-opc.o.
3464 * configure: Rebuild with autoconf 2.10.
3465 * Makefile.in (ALL_MACHINES): Add alpha-opc.o.
3466 (alpha-dis.o): Depend upon $(INCDIR)/opcode/alpha.h, not
3468 (alpha-opc.o): New target.
3470 Wed Jun 19 15:55:12 1996 Ian Lance Taylor <ian@cygnus.com>
3472 * sparc-dis.c (print_insn_sparc): Remove unused local variable i.
3473 Set imm_added_to_rs1 even if the source and destination register
3476 * sparc-opc.c: Add some two operand forms of the wr instruction.
3478 Tue Jun 18 15:58:27 1996 Jeffrey A. Law <law@rtl.cygnus.com>
3480 * h8300-dis.c (bfd_h8_disassemble): Rename "hmode" argument
3483 * disassemble.c (disassembler): Handle H8/S.
3484 * h8300-dis.c (print_insn_h8300s): New function for H8/S.
3486 Tue Jun 18 18:06:50 1996 Ian Lance Taylor <ian@cygnus.com>
3488 * sparc-opc.c: Add beq/teq as aliases for be/te.
3490 * ppc-opc.c: Fix fcmpo opcode. From Sergei Steshenko
3491 <sergei@msil.sps.mot.com>.
3493 Tue Jun 18 15:08:54 1996 Klaus Kaempf <kkaempf@progis.de>
3495 * makefile.vms: New file.
3497 * alpha-dis.c (print_insn_alpha): Print lda ra,lit(rz) as mov.
3499 Mon Jun 10 18:50:38 1996 Ian Lance Taylor <ian@cygnus.com>
3501 * h8300-dis.c (bfd_h8_disassemble): Always print ABS8MEM with :8,
3504 Tue Jun 4 09:15:53 1996 Doug Evans <dje@canuck.cygnus.com>
3506 * i386-dis.c (OP_OFF): Call append_prefix.
3508 Thu May 23 15:18:23 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3510 * ppc-opc.c (instruction encoding macros): Add explicit casts to
3511 unsigned long to silence a warning from the Solaris PowerPC
3514 Thu Apr 25 19:33:32 1996 Doug Evans <dje@canuck.cygnus.com>
3516 * sparc-opc.c (sparc_opcodes): Add ultrasparc vis extensions.
3518 Mon Apr 22 17:12:35 1996 Doug Evans <dje@blues.cygnus.com>
3520 * sparc-dis.c (X_IMM,X_SIMM): New macros.
3522 (print_insn_sparc): Merge cases i,I,j together. New cases X,Y.
3523 * sparc-opc.c (sparc_opcodes): Use X for 5 bit shift constants,
3524 Y for 6 bit shift constants. Rewrite entries for crdcxt, cwrcxt,
3525 cpush, cpusha, cpull sparclet insns.
3527 Wed Apr 17 14:20:22 1996 Doug Evans <dje@canuck.cygnus.com>
3529 * sparc-dis.c (compute_arch_mask): Replace ANSI style def with K&R.
3531 Thu Apr 11 17:30:02 1996 Ian Lance Taylor <ian@cygnus.com>
3533 * sparc-opc.c: Set F_FBR on floating point branch instructions.
3534 Set F_FLOAT on other floating point instructions.
3536 Mon Apr 8 17:02:48 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3538 * ppc-opc.c (PPC860): Macro for 860/821 specific instructions and
3540 (powerpc_opcodes): Add 860/821 specific SPRs.
3542 Mon Apr 8 14:00:44 1996 Ian Lance Taylor <ian@cygnus.com>
3544 * configure.in: Permit --enable-shared to specify a list of
3545 directories. Set and substitute BFD_PICLIST.
3546 * configure: Rebuild.
3547 * Makefile.in (BFD_PICLIST): Rename from BFD_LIST. Change all
3548 uses. Set to @BFD_PICLIST@.
3550 Fri Apr 5 17:12:27 1996 Jeffrey A Law (law@cygnus.com)
3552 * h8300-dis.c (bfd_h8_disassemble): Use "bit" for L_3 immediates,
3553 not "abs", which may be needed for the absolute in something
3554 like btst #0,@10:8. Print L_3 immediates separately from other
3555 immediates. Change ABSMOV reference to ABS8MEM.
3557 Wed Apr 3 10:40:45 1996 Doug Evans <dje@canuck.cygnus.com>
3559 * sparc-dis.c (opcodes_initialized): Move inside print_insn_sparc.
3560 (current_arch_mask): New static global.
3561 (compute_arch_mask): New static function.
3562 (print_insn_sparc): Delete sparc_v9_p. New static local
3563 current_mach. Resort opcode table if current_mach changes.
3564 Generalize "insn not supported" test.
3565 (compare_opcodes): Prefer supported opcodes to nonsupported ones.
3566 Delete test for v9/!v9.
3567 * sparc-opc.c (MASK_*): Use SPARC_OPCODE_ARCH_MASK.
3569 (brfc): Split into CBR and FBR for coprocessor/fp branches.
3570 (brfcx): Renamed to FBRX.
3571 (condfc): Renamed to CONDFC. Pass v6notlet to CBR (standard
3572 coprocessor mnemonics are not supported on the sparclet).
3573 (condf): Renamed to CONDF.
3574 (SLCBCC2): Delete F_ALIAS flag.
3576 Sat Mar 30 21:45:59 1996 Doug Evans <dje@canuck.cygnus.com>
3578 * sparc-opc.c (sparc_opcodes): rd must be 0 for
3579 mov foo,{%y,%psr,%wim,%tbr}. Support mov foo,%asrX.
3581 Fri Mar 29 13:02:40 1996 Ian Lance Taylor <ian@cygnus.com>
3583 * Makefile.in (config.status): Depend upon BFD VERSION file, so
3584 that the shared library version number is set correctly.
3586 Tue Mar 26 15:47:14 1996 Ian Lance Taylor <ian@cygnus.com>
3588 * configure.in: Use AC_CHECK_TOOL to find ar and ranlib. From
3589 Miles Bader <miles@gnu.ai.mit.edu>.
3590 * configure: Rebuild.
3592 Sat Mar 16 13:04:07 1996 Fred Fish <fnf@cygnus.com>
3594 * z8kgen.c (internal, gas): Call xmalloc rather than unchecked
3597 Tue Mar 12 12:14:10 1996 Ian Lance Taylor <ian@cygnus.com>
3599 * configure: Rebuild with autoconf 2.8.
3601 Thu Mar 7 15:11:10 1996 Doug Evans <dje@charmed.cygnus.com>
3603 * sparc-dis.c (print_insn_sparc): Handle 'O' operand char like 'r'.
3604 * sparc-opc.c (sparc_opcodes): Use 'O' operand char for `neg reg'.
3606 Tue Mar 5 15:51:57 1996 Ian Lance Taylor <ian@cygnus.com>
3608 * configure.in: Don't set SHLIB or SHLINK to an empty string,
3609 since they appear as targets in Makefile.in.
3610 * configure: Rebuild.
3612 Mon Feb 26 13:03:40 1996 Stan Shebs <shebs@andros.cygnus.com>
3614 * mpw-make.sed: Edit out shared library support bits.
3616 Tue Feb 20 20:48:28 1996 Doug Evans <dje@charmed.cygnus.com>
3618 * sparc-opc.c (v8,v6notv9): Add MASK_SPARCLET.
3619 (sparc_opcode_archs): Add MASK_V8 to sparclet entry.
3620 (sparc_opcodes): Add sparclet insns.
3621 (sparclet_cpreg_table): New static local.
3622 (sparc_{encode,decode}_sparclet_cpreg): New functions.
3623 * sparc-dis.c (print_insn_sparc): Handle sparclet cpregs.
3625 Tue Feb 20 11:02:44 1996 Alan Modra <alan@mullet.Levels.UniSA.Edu.Au>
3627 * i386-dis.c (index16): New static variable.
3628 (putop): Print jecxz for 32 bit case, jcxz for 16 bit, not the
3630 (OP_indirE): Return result of OP_E.
3631 (OP_E): Check for 16 bit addressing mode, and disassemble
3632 correctly. Optimised 32 bit case a little. Don't print
3633 "(base,index,scale)" when sib specifies only an offset.
3635 Mon Feb 19 12:32:17 1996 Ian Lance Taylor <ian@cygnus.com>
3637 * configure.in: Set and substitute SHLIB_DEP.
3638 * configure: Rebuild.
3639 * Makefile.in (SHLIB_DEP): New variable.
3640 (LIBIBERTY_LISTS, BFD_LIST): New variables.
3641 (stamp-piclist): Depend upon LIBIBERTY_LISTS and BFD_LIST. If
3642 COMMON_SHLIB, add them to piclist with appropriate modifications.
3643 ($(SHLIB)): Depend upon $(SHLIB_DEP). Don't check COMMON_SHLIB
3644 here: just use piclist.
3646 Mon Feb 19 02:03:50 1996 Doug Evans <dje@charmed.cygnus.com>
3648 * sparc-dis.c (MASK_V9,V9_ONLY_P,V9_P): Define.
3649 (print_insn_sparc): Rewrite v9/not-v9 tests.
3650 (compare_opcodes): Likewise.
3651 * sparc-opc.c (MASK_<ARCH>): Define.
3652 (v6,v7,v8,sparclite,v9,v9a): Redefine.
3653 (sparclet,v6notv9): Define.
3654 (sparc_opcode_archs): Delete member `conflicts'. Add `supported'.
3655 (sparc_opcodes): Delete F_NOTV9, use v6notv9 instead.
3657 Thu Feb 15 14:45:05 1996 Ian Lance Taylor <ian@cygnus.com>
3659 * configure.in: Call AC_PROG_CC before configure.host.
3660 * configure: Rebuild.
3662 * Makefile.in (SONAME): Remove leading ../bfd/ from $(SHLIB).
3664 Wed Feb 14 19:01:27 1996 Alan Modra <alan@spri.levels.unisa.edu.au>
3666 * i386-dis.c (onebyte_has_modrm): New static array.
3667 (twobyte_has_modrm): New static array.
3668 (print_insn_i386): Only fetch the mod/reg/rm byte if it is needed.
3670 Tue Feb 13 15:15:01 1996 Ian Lance Taylor <ian@cygnus.com>
3672 * Makefile.in ($(SHLINK)): Check ts against $(SHLIB), not
3675 Mon Feb 12 16:26:06 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3677 * ppc-opc.c (PPC): Undef, so default defination on Windows NT
3680 Wed Feb 7 13:59:54 1996 Ian Lance Taylor <ian@cygnus.com>
3682 * m68k-opc.c (m68k_opcodes): The bkpt instruction is supported on
3683 m68010up, not just m68020up | cpu32.
3685 * Makefile.in (SONAME): New variable.
3686 ($(SHLINK)): Make a link to the transformed name, as well.
3687 (stamp-tshlink): New target.
3688 (install): Skip stamp-tshlink during install.
3690 Tue Feb 6 12:28:54 1996 Ian Lance Taylor <ian@cygnus.com>
3692 * configure.in: Call AC_ARG_PROGRAM.
3693 * configure: Rebuild.
3694 * Makefile.in (program_transform_name): New variable.
3695 (install): Transform library name before installing it.
3697 Mon Feb 5 16:14:42 1996 Ian Lance Taylor <ian@cygnus.com>
3699 * i960-dis.c (mem): Add HX dcinva instruction.
3701 Support for building as a shared library, based on patches from
3702 Alan Modra <alan@spri.levels.unisa.edu.au>:
3703 * configure.in: Add AC_ARG_ENABLE for shared and commonbfdlib.
3704 New substitutions: ALLLIBS, PICFLAG, SHLIB, SHLIB_CC,
3705 SHLIB_CFLAGS, COMMON_SHLIB, SHLINK.
3706 * configure: Rebuild.
3707 * Makefile.in (ALLLIBS): New variable.
3708 (PICFLAG, SHLIB, SHLIB_CC, SHLIB_CFLAGS): New variables.
3709 (COMMON_SHLIB, SHLINK): New variables.
3710 (.c.o): If PICFLAG is set, compile twice, once PIC, once normal.
3711 (STAGESTUFF): Remove variable.
3712 (all): Depend upon $(ALLLIBS) rather than $(TARGETLIB).
3713 (stamp-piclist, piclist): New targets.
3714 ($(SHLIB), $(SHLINK)): New targets.
3715 ($(OFILES)): Depend upon stamp-picdir.
3716 (disassemble.o): Build twice if PICFLAG is set.
3717 (MOSTLYCLEAN): Add pic/*.o.
3718 (clean): Remove $(SHLIB), $(SHLINK), piclist, and stamp-piclist.
3719 (distclean): Remove pic and stamp-picdir.
3720 (install): Install shared libraries.
3721 (stamp-picdir): New target.
3723 Fri Feb 2 17:15:25 1996 Doug Evans <dje@charmed.cygnus.com>
3725 * sparc-dis.c (print_insn_sparc): Delete DISASM_RAW_INSN support.
3726 Print unknown instruction as "unknown", rather than in hex.
3728 Tue Jan 30 14:06:08 1996 Ian Lance Taylor <ian@cygnus.com>
3730 * dis-buf.c: Include "sysdep.h" before "dis-asm.h".
3732 Thu Jan 25 20:24:07 1996 Doug Evans <dje@charmed.cygnus.com>
3734 * sparc-opc.c (sparc_opcode_archs): Mark v8/sparclite as conflicting.
3736 Thu Jan 25 11:56:49 1996 Ian Lance Taylor <ian@cygnus.com>
3738 * i386-dis.c (print_insn_i386): Only fetch the mod/reg/rm byte
3739 when necessary. From Ulrich Drepper
3740 <drepper@myware.rz.uni-karlsruhe.de>.
3742 Thu Jan 25 03:39:10 1996 Doug Evans <dje@charmed.cygnus.com>
3744 * sparc-dis.c (print_insn_sparc): NUMOPCODES replaced with
3745 sparc_num_opcodes. Update architecture enum values.
3746 * sparc-opc.c (sparc_opcode_archs): Replaces architecture_pname.
3747 (sparc_opcode_lookup_arch): New function.
3748 (sparc_num_opcodes): Renamed from bfd_sparc_num_opcodes.
3749 (sparc_opcodes): Add v9a shutdown insn.
3751 Mon Jan 22 08:29:59 1996 Doug Evans <dje@charmed.cygnus.com>
3753 * sparc-dis.c (print_insn_sparc): Renamed from print_insn.
3754 If DISASM_RAW_INSN, print insn in hex. Handle v9a as opcode
3756 (print_insn_sparc64): Deleted.
3757 * disassemble.c (disassembler, case bfd_arch_sparc): Always use
3760 * sparc-opc.c (architecture_pname): Add v9a.
3762 Fri Jan 12 14:35:58 1996 David Mosberger-Tang <davidm@AZStarNet.com>
3764 * alpha-opc.h (alpha_insn_set): VAX floating point opcode was
3765 incorrectly defined as 0x16 when it should be 0x15.
3766 (FLOAT_FORMAT_MASK): function code is 11 bits, not just 7 bits!
3767 (alpha_insn_set): added cvtst and cvttq float ops. Also added
3768 excb (exception barrier) which is defined in the Alpha
3769 Architecture Handbook version 2.
3770 * alpha-dis.c (print_insn_alpha): Fixed special-case decoding for
3771 OPERATE_FORMAT_CODE type instructions. The bug caused mulq to be
3772 disassembled as or, for example.
3774 Wed Jan 10 12:37:22 1996 Ian Lance Taylor <ian@cygnus.com>
3776 * mips-dis.c (print_insn_arg): Print cases 'i' and 'u' in hex.
3777 (_print_insn_mips): Change i from int to unsigned int.
3779 Thu Jan 4 17:21:10 1996 David Edelsohn <edelsohn@mhpcc.edu>
3781 * ppc-opc.c (powerpc_opcodes): tlbi POWER opcode form different
3782 from tlbie PowerPC opcode. Add PPC603 tlbld and tlbli.
3784 Thu Dec 28 13:29:19 1995 John Hassey <hassey@rtp.dg.com>
3786 * i386-dis.c: Added Pentium Pro instructions.
3788 Tue Dec 19 22:56:35 1995 Michael Meissner <meissner@tiktok.cygnus.com>
3790 * ppc-opc.c (fsqrt{,.}): Duplicate for PowerPC in addition to
3793 Fri Dec 15 14:14:15 1995 J.T. Conklin <jtc@rtl.cygnus.com>
3795 * sh-opc.h (sh_nibble_type): Added REG_B.
3796 (sh_arg_type): Added A_REG_B.
3797 (sh_table): Added pref and bank reg versions of ldc, ldc.l, stc
3799 * sh-dis.c (print_insn_shx): Added cases for REG_B and A_REG_B.
3801 Fri Dec 15 16:44:31 1995 Ian Lance Taylor <ian@cygnus.com>
3803 * disassemble.c (disassembler): Use new bfd_big_endian macro.
3805 Tue Dec 12 12:22:24 1995 Ian Lance Taylor <ian@cygnus.com>
3807 * Makefile.in (distclean): Remove stamp-h. From Ronald
3808 F. Guilmette <rfg@monkeys.com>.
3810 Tue Dec 5 13:42:44 1995 Stan Shebs <shebs@andros.cygnus.com>
3812 From David Mosberger-Tang <davidm@azstarnet.com>:
3813 * alpha-dis.c (print_insn_alpha): fixed decoding of cpys
3816 Mon Dec 4 12:29:05 1995 J.T. Conklin <jtc@rtl.cygnus.com>
3818 * sh-opc.h (sh_arg_type): Added A_SSR and A_SPC.
3819 (sh_table): Added many SH3 opcodes.
3820 * sh-dis.c (print_insn_shx): Added cases for A_SSR and A_SPC.
3822 Fri Dec 1 07:42:18 1995 Michael Meissner <meissner@tiktok.cygnus.com>
3824 * ppc-opc.c (subfc., subfco): Mark this PPCCOM, not PPC.
3825 (subco,subco.): Mark this PPC, not PPCCOM.
3827 Mon Nov 27 13:09:52 1995 Ian Lance Taylor <ian@cygnus.com>
3829 * configure: Rebuild with autoconf 2.7.
3831 Tue Nov 21 18:28:06 1995 Ian Lance Taylor <ian@cygnus.com>
3833 * configure: Rebuild with autoconf 2.6.
3835 Wed Nov 15 19:02:53 1995 Ken Raeburn <raeburn@cygnus.com>
3837 * configure.in: Sort list of architectures. Accept but do nothing
3838 for alliant, convex, pyramid, romp, and tahoe.
3840 Wed Nov 8 20:18:59 1995 Ian Lance Taylor <ian@cygnus.com>
3842 * a29k-dis.c (print_special): Change num to unsigned int.
3844 Wed Nov 8 20:10:35 1995 Eric Freudenthal <freudenthal@nyu.edu>
3846 * a29k-dis.c (print_insn): Cast insn24 to unsigned long when
3849 Tue Nov 7 15:21:06 1995 Ian Lance Taylor <ian@cygnus.com>
3851 * configure.in: Call AC_CHECK_PROG to find and cache AR.
3852 * configure: Rebuilt.
3854 Mon Nov 6 17:39:47 1995 Harry Dolan <dolan@ssd.intel.com>
3856 * configure.in: Add case for bfd_i860_arch.
3857 * configure: Rebuild.
3859 Fri Nov 3 12:45:31 1995 Ian Lance Taylor <ian@cygnus.com>
3861 * m68k-opc.c (m68k_opcodes): Correct fmoveml operands.
3862 * m68k-dis.c (NEXTSINGLE): Change i to unsigned int.
3863 (NEXTDOUBLE): Likewise.
3864 (print_insn_m68k): Don't match fmoveml if there is more than one
3865 register in the list.
3866 (print_insn_arg): Handle a place of '8' for a type of 'L'.
3868 Thu Nov 2 23:06:33 1995 Ian Lance Taylor <ian@cygnus.com>
3870 * m68k-opc.c: Use #W rather than #w.
3871 * m68k-dis.c (print_insn_arg): Handle new 'W' place.
3873 Wed Nov 1 13:30:24 1995 Ian Lance Taylor <ian@cygnus.com>
3875 * m68k-opc.c (m68k_opcode_aliases): Add dbfw as an alias for dbf,
3876 and likewise for all the dbxx opcodes.
3878 Mon Oct 30 20:50:40 1995 Fred Fish <fnf@cygnus.com>
3880 * arc-dis.c: Include elf-bfd.h rather than libelf.h.
3882 Mon Oct 23 11:11:34 1995 James G. Smith <jsmith@pasanda.cygnus.co.uk>
3884 * mips-opc.c: Added shorthand (V1) for INSN_4100 manifest. Added
3885 the VR4100 specific instructions to the mips_opcodes structure.
3887 Thu Oct 19 11:05:23 1995 Stan Shebs <shebs@andros.cygnus.com>
3889 * mpw-config.in, mpw-make.sed: Remove ugly workaround for
3890 ugly Metrowerks bug in CW6, is fixed in CW7.
3892 Mon Oct 16 12:59:01 1995 Michael Meissner <meissner@tiktok.cygnus.com>
3894 * ppc-opc.c (whole file): Add flags for common/any support.
3896 Tue Oct 10 11:06:07 1995 Fred Fish <fnf@cygnus.com>
3898 * Makefile.in (BISON): Remove macro.
3899 (FLAGS_TO_PASS): Remove BISON.
3901 Fri Oct 6 16:26:45 1995 Ken Raeburn <raeburn@cygnus.com>
3903 Mon Sep 25 22:49:32 1995 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
3905 * m68k-dis.c (print_insn_m68k): Recognize all two-word
3906 instructions that take no args by looking at the match mask.
3907 (print_insn_arg): Always print "%" before register names.
3908 [case 'c']: Use "nc" for the no-cache case, as recognized by gas.
3909 [case '_']: Don't print "@#" before address.
3910 [case 'J']: Use "%s" as format string, not register name.
3911 [case 'B']: Treat place == 'C' like 'l' and 'L'.
3913 Thu Oct 5 22:16:20 1995 Ken Raeburn <raeburn@cygnus.com>
3915 * i386-dis.c: Describe cmpxchg8b operand, and spell the opcode
3918 Tue Oct 3 08:30:20 1995 steve chamberlain <sac@slash.cygnus.com>
3920 From David Mosberger-Tang <davidm@azstarnet.com>
3922 * alpha-opc.h (MEMORY_FUNCTION_FORMAT_MASK): added.
3923 (alpha_insn_set): added definitions for VAX floating point
3924 instructions (Unix compilers don't generate these, but handcoded
3925 assembly might still use them).
3927 * alpha-dis.c (print_insn_alpha): added support for disassembling
3928 the miscellaneous instructions in the Alpha instruction set.
3930 Tue Sep 26 18:47:20 1995 Stan Shebs <shebs@andros.cygnus.com>
3932 * mpw-config.in: Add m68k-opc.c.o to BFD_MACHINES for m68k,
3933 no longer create sysdep.h, sed ppc-opc.c to work around a
3934 serious Metrowerks C bug.
3935 * mpw-make.in: Remove.
3936 * mpw-make.sed: New file, used by mpw-configure to edit
3937 Makefile.in into an MPW makefile.
3939 Wed Sep 20 12:55:28 1995 Ian Lance Taylor <ian@cygnus.com>
3941 * Makefile.in (maintainer-clean): New synonym for realclean.
3943 Tue Sep 19 15:28:36 1995 Ian Lance Taylor <ian@cygnus.com>
3945 * m68k-opc.c: Split pmove patterns which use 'P' into patterns
3946 which use '0', '1', and '2' instead. Specify the proper size for
3947 a pmove immediate operand. Correct the pmovefd patterns to be
3948 moves to a register, not from a register.
3949 * m68k-dis.c (print_insn_arg): Replace 'P' with '0', '1', '2'.
3951 Thu Sep 14 11:58:22 1995 Doug Evans <dje@canuck.cygnus.com>
3953 * sparc-opc.c (sparc_opcodes): Mark all insns that reference
3954 %psr, %wim, %tbr as F_NOTV9.
3956 Fri Sep 8 01:07:38 1995 Ian Lance Taylor <ian@cygnus.com>
3958 * Makefile.in (Makefile): Just rebuild Makefile when running
3960 (config.h, stamp-h): New targets.
3961 * configure.in: Call AC_CONFIG_HEADER and AC_CANONICAL_SYSTEM
3962 earlier. Don't bother to call AC_ARG_PROGRAM. Touch stamp-h when
3963 rebuilding config.h.
3964 * configure: Rebuild.
3966 * mips-opc.c: Change unaligned loads and stores with "t,A"
3967 operands to use "t,A(b)".
3969 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3971 * sh-dis.c (print_insn_shx): Add F_FR0 support.
3973 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3975 * sh-dis.c (print_insn_shx): Change loop over op->arg[n] to iterate
3976 until 3 instead of until 2.
3978 Wed Sep 6 21:21:33 1995 Ian Lance Taylor <ian@cygnus.com>
3980 * Makefile.in (ALL_CFLAGS): Define.
3981 (.c.o, disassemble.o): Use $(ALL_CFLAGS).
3982 (MOSTLYCLEAN): Add config.log.
3983 (distclean): Don't remove config.log.
3984 * configure.in: Substitute HDEFINES.
3985 * configure: Rebuild.
3987 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3989 * sh-opc.h (sh_arg_type): Add F_FR0.
3990 (sh_table, case fmac): Add F_FR0 as first argument.
3992 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3994 * sh-opc.h (sh_opcode_info): Increase arg array size to 4.
3996 Tue Sep 5 18:28:10 1995 Doug Evans <dje@canuck.cygnus.com>
3998 * sparc-dis.c: Remove all references to NO_V9.
4000 Tue Sep 5 20:03:26 1995 Ian Lance Taylor <ian@cygnus.com>
4002 * aclocal.m4: Just include ../bfd/aclocal.m4.
4003 * configure: Rebuild.
4005 Tue Sep 5 16:09:59 1995 Doug Evans <dje@canuck.cygnus.com>
4007 * sparc-dis.c (X_DISP19): Define.
4008 (print_insn, case 'G'): Use it.
4009 (print_insn, case 'L'): Sign extend displacement.
4011 Mon Sep 4 14:28:46 1995 Ian Lance Taylor <ian@cygnus.com>
4013 * configure.in: Run ../bfd/configure.host before AC_PROG_CC.
4014 Subsitute CFLAGS and AR. Call AC_PROG_INSTALL. Don't substitute
4015 host_makefile_frag or frags.
4016 * aclocal.m4: New file.
4017 * configure: Rebuild.
4018 * Makefile.in (INSTALL): Set to @INSTALL@.
4019 (INSTALL_PROGRAM): Set to @INSTALL_PROGRAM@.
4020 (INSTALL_DATA): Set to @INSTALL_DATA@.
4022 (AR_FLAGS): Set to rc rather than qc.
4023 (CC): Define as @CC@.
4024 (CFLAGS): Set to @CFLAGS@.
4025 (@host_makefile_frag@): Remove.
4026 (config.status): Remove dependency upon @frags@.
4028 * configure.in: ../bfd/config.bfd now just sets shell variables.
4029 Use them rather than looking through target Makefile fragments.
4030 * configure: Rebuild.
4032 Thu Aug 31 12:35:32 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4034 * sh-opc.h (ftrc): Change FPUL_N to FPUL_M.
4036 Wed Aug 30 13:52:28 1995 Doug Evans <dje@canuck.cygnus.com>
4038 * sparc-opc.c (sparc_opcodes): Delete duplicate wr %y insn.
4039 Add clrx, iprefetch, signx, clruw, cas, casl, casx, casxl synthetic
4042 * sparc-opc.c (sparc_opcodes): Fix prefetcha insn.
4043 (lookup_{name,value}): New functions.
4044 (prefetch_table): New static local.
4045 (sparc_{encode,decode}_prefetch): New functions.
4046 * sparc-dis.c (print_insn): Handle '*' arg (prefetch function).
4048 Wed Aug 30 11:11:58 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4050 * sh-opc.h: Add blank lines to improve readabililty of sh3e
4053 Wed Aug 30 11:09:38 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4055 * sh-dis.c: Correct comment on first line of file.
4057 Tue Aug 29 15:37:18 1995 Doug Evans <dje@canuck.cygnus.com>
4059 * disassemble.c (disassembler): Handle bfd_mach_sparc64.
4061 * sparc-opc.c (asi, membar): New static locals.
4062 (sparc_{encode,decode}_{asi,membar}): New functions.
4063 (sparc_opcodes, membar insn): Fix.
4064 * sparc-dis.c (print_insn): Call sparc_decode_asi.
4065 Support decoding of membar masks.
4068 Sat Aug 26 21:22:48 1995 Ian Lance Taylor <ian@cygnus.com>
4070 * m68k-opc.c (m68k_opcode_aliases): Add br, brs, brb, brw, brl.
4072 Mon Aug 21 17:33:36 1995 Ian Lance Taylor <ian@cygnus.com>
4074 * m68k-opc.c (m68k_opcode_aliases): Add bhib as an alias for bhis,
4075 and likewise for the other branches. Add bhs as an alias for bcc,
4076 and likewise for the size variants. Add dbhs as an alias for
4079 Fri Aug 11 13:40:24 1995 Jeff Law (law@snake.cs.utah.edu)
4081 * sh-opc.h (FP sts instructions): Update to match reality.
4083 Mon Aug 7 16:12:58 1995 Ian Lance Taylor <ian@cygnus.com>
4085 * m68k-dis.c: (fpcr_names): Add % before all register names.
4086 (reg_names): Likewise.
4087 (print_insn_arg): Don't explicitly print % before register names.
4088 Add % before register names in static array names. In case 'r',
4089 print data registers as `@(Dn)', not `Dn@'. When printing a
4090 memory address, don't print @# before it.
4091 (print_indexed): Change base_disp and outer_disp from int to
4092 bfd_vma. Print using MIT syntax, not mutant invalid Motorola
4093 syntax. Sign extend 8 byte displacement correctly.
4094 (print_base): Print using MIT syntax. Print zpc when appropriate.
4095 Change parameter disp from int to bfd_vma.
4097 * m68k-opc.c (m68k_opcode_aliases): Add jsrl and jsrs as aliases
4100 Mon Aug 7 02:21:40 1995 Jeff Law (law@snake.cs.utah.edu)
4102 * sh-dis.c (print_insn_shx): Handle new operand types F_REG_N,
4103 F_REG_M, FPSCR_M, FPSCR_N, FPUL_M and FPUL_N.
4104 * sh-opc.h (sh_arg_type): Add new operand types.
4105 (sh_table): Add new opcodes from SH3E Floating Point ISA.
4107 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
4109 * Makefile.in (distclean): Remove generated file config.h.
4111 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
4113 * Makefile.in (distclean): Remove generated file config.h.
4115 Wed Aug 2 18:33:40 1995 Ian Lance Taylor <ian@cygnus.com>
4117 * m68k-opc.c: New file, holding tables from include/opcode/m68k.h.
4119 * m68k-dis.c: Remove BREAK_UP_BIG_DECL stuff.
4121 (print_insn_m68k): Change d to be const. Use m68k_numopcodes
4122 rather than numopcodes. Use m68k_opcodes rather than removed
4123 opcode function. Don't check F_ALIAS.
4124 (print_insn_arg): Change first parameter to be const char *.
4125 * Makefile.in (ALL_MACHINES): Add m68k-opc.o.
4126 (m68k-opc.o): New target.
4127 * configure.in: Build m68k-opc.o for bfd_m68k_arch.
4128 * configure: Rebuild.
4130 Wed Aug 2 08:23:38 1995 Doug Evans <dje@canuck.cygnus.com>
4132 * sparc-dis.c (HASH_SIZE, HASH_INSN): Define.
4133 (opcode_bits, opcode_hash_table): New variables.
4134 (opcodes_initialized): Renamed from opcodes_sorted.
4135 (build_hash_table): New function.
4136 (is_delayed_branch): Use hash table.
4137 (print_insn): Renamed from print_insn_sparc, made static.
4138 Build and use hash table. If !sparc64, ignore sparc64 insns,
4139 and vice-versa if sparc64.
4140 (print_insn_sparc, print_insn_sparc64): New functions.
4141 (compare_opcodes): Move sparc64 opcodes to end.
4142 Print commutative insns with constant second.
4143 * sparc-opc.c (all non-v9 insns): Use flag F_NOTV9 instead of F_ALIAS.
4145 Tue Aug 1 00:12:49 1995 Ian Lance Taylor <ian@cygnus.com>
4147 * sh-dis.c (print_insn_shx): Remove unused local dslot. Use
4148 print_address_func for A_BDISP12 and A_BDISP8. Correct test which
4149 avoids printing a delay slot in a delay slot.
4150 * sh-opc.h (sh_table): Fully bracket last entry.
4152 Mon Jul 31 12:04:47 1995 Doug Evans <dje@canuck.cygnus.com>
4154 * sparc-opc.c (sllx, srax, srlx): Fix disassembly.
4156 Wed Jul 12 00:59:34 1995 Ken Raeburn <raeburn@kr-pc.cygnus.com>
4158 * configure.in: Get host_makefile_frag from ${srcdir}.
4160 * configure.in: Autoconfiscated. Check for string[s].h. Create
4161 config.h from config.in. Don't set up sysdep.h link.
4162 * sysdep.h: New file.
4163 * configure, config.in: New files, generated from configure.in.
4164 * Makefile.in: Updated to be processed autoconf-style.
4165 (distclean): Keep sysdep.h. Remove config.log and config.cache.
4166 (Makefile): Depend on config.status.
4167 (config.status): New rule.
4168 * configure.bat: Update Makefile substitutions.
4170 Tue Jul 11 14:23:37 1995 Jeff Spiegel <jeffs@lsil.com>
4172 * mips-opc.c (L1): Define.
4173 (mips_opcodes): Add R4010 instructions: flushi, flushd, flushid,
4174 addciu, madd, maddu, ffc, ffs, msub, msubu, selsi, selsr, waiti,
4177 Tue Jul 11 11:49:49 1995 Ian Lance Taylor <ian@cygnus.com>
4179 * mips-opc.c (mips_opcodes): For the move pseudo-op, prefer daddu
4180 if ISA 3 and addu otherwise, replacing or, since some MIPS chips
4181 have multiple add units but only a single logical unit.
4183 * ppc-opc.c (powerpc_operands): Change CR to use a bitsize of 3,
4184 shifted by 18, without any insertion or extraction function.
4185 (insert_cr, extract_cr): Remove.
4187 Wed Jun 21 20:05:39 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4189 * m68k-dis.c (print_insn_arg, print_indexed): Print "%" before
4192 Thu Jun 15 17:23:31 1995 Stan Shebs <shebs@andros.cygnus.com>
4194 * mpw-config.in: Add sh and i386 configs, remove sparc config.
4195 * sh-opc.h: Add copyright.
4197 Mon Jun 5 03:30:43 1995 Ken Raeburn <raeburn@kr-laptop.cygnus.com>
4199 * Makefile.in (crunch-m68k): Delete extra target accidentally
4200 checked in a while ago.
4202 Wed May 24 16:22:13 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4204 * sh-opc.h (sh_table): Add SH3 support.
4206 Wed May 24 14:16:08 1995 Steve Chamberlain <sac@slash.cygnus.com>
4208 * sh-opc.h: Added bsrf and braf.
4210 Wed May 10 14:28:16 1995 Richard Earnshaw (rearnsha@armltd.co.uk)
4212 * arm-opc.h (arm_opcodes): Add 64-bit multiply patterns. Delete
4213 bogus [ls]fm{ea,fd} patterns.
4215 * arm-opc.h (arm_opcodes): Correct typos in stm, ldm, std, and ldc.
4216 * arm-dis.c (print_insn_arm): Make GIVEN a parameter, don't try and
4217 initialize it from memory. Make function static.
4218 (print_insn_{big,little}_arm): New functions.
4219 * disassemble.c (disassembler, case bfd_arch_arm): Disassemble for
4220 the correct endianness.
4222 Mon Apr 24 14:18:05 1995 Jason Molenda (crash@phydeaux.cygnus.com>
4224 * sh-opc.h (sh_nibble_type, sh_arg_type): remove trailing , from
4227 Wed Apr 19 14:07:03 1995 Michael Meissner <meissner@tiktok.cygnus.com>
4229 * m68k-dis.c (opcode): Finish change made by Kung Hsu on April
4230 17th, so that it builds again using GCC as the compiler.
4232 Tue Apr 18 12:14:51 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4234 * mips-dis.c (print_insn_little_mips): Cast return value from
4235 bfd_getl32 from bfd_vma to unsigned long, because _print_insn_mips
4236 expects an unsigned long, and that might be fewer words of
4237 argument storage (e.g., if bfd_vma is long long on a 32-bit
4239 (print_insn_big_mips): Likewise with bfd_getb32 value.
4240 (_print_insn_mips): Now static.
4242 Mon Apr 17 12:23:28 1995 Kung Hsu <kung@rtl.cygnus.com>
4244 * m68k-dis.c: Take out #define BREAK_UP_BIG_DECL kludge, because
4245 gcc memory hog problem with initializer is fixed.
4247 Mon Apr 10 15:55:01 1995 Stan Shebs <shebs@andros.cygnus.com>
4249 Merge in support for Mac MPW as a host.
4250 (Old change descriptions retained for informational value.)
4252 * mpw-config.in (archname): Compute from the config.
4253 (BFD_MACHINES, ARCHDEFS): Put into mk.tmp.
4255 * mpw-config.in (target_arch): Compute from canonical target.
4256 (m68k, mips, powerpc, sparc): Add architectures.
4257 * mpw-make.in (disassemble.c.o): Add.
4258 (ALL_CFLAGS): Remove special flags (-mc68020 -mc68881 -model far).
4260 * mpw-config.in (BFD_MACHINES): Set to a default value.
4261 * mpw-make.in (BFD_MACHINES): Remove wired-in value.
4263 * mpw-make.in (CSEARCH): Add extra-include to search path.
4265 * mpw-config.in (varargs.h): Don't create.
4266 (sysdep.h): Create using forward-include.
4267 * mpw-make.in (CSEARCH): Add include/mpw to search path.
4269 * mpw-config.in: New file, MPW version of configure.in.
4270 * mpw-make.in: New file, MPW version of Makefile.in.
4272 Fri Mar 31 14:23:38 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4274 * alpha-dis.c (print_insn_alpha): Put empty statement after
4277 Tue Mar 21 10:51:40 1995 Jeff Law (law@snake.cs.utah.edu)
4279 * hppa-dis.c (sign_extend): Delete, redundant with libhppa.h version.
4280 (low_sign_extend): Likewise.
4281 (get_field): Delete unused function.
4282 (set_field, deposit_14, deposit_21): Likewise.
4284 Fri Mar 17 15:55:53 1995 J.T. Conklin <jtc@rtl.cygnus.com>
4286 * i386-dis.c: Support for more pentium opcodes. From Guy Harris
4289 Tue Mar 14 00:52:57 1995 Ken Raeburn (raeburn@kr-pc.cygnus.com)
4291 Sat Feb 11 17:22:41 1995 Klaus Kaempf (kkaempf@didymus.rmi.de)
4293 * alpha-opc.h (OSF_ASMCODE): define
4294 print pal-code names as defined in App C of the
4295 Alpha Architecture Reference Manual
4297 * alpha-dis.c: cleaned up output
4298 print stylized code forms as defined in App A.4.3 of the
4299 Alpha Architecture Reference Manual
4301 Wed Mar 8 15:21:14 1995 Ian Lance Taylor <ian@cygnus.com>
4303 * mips-opc.c: Add new mips4 instructions. Don't set INSN_RFE for
4305 * mips-dis.c (print_insn_arg): Handle new argument types 'h', 'R',
4308 Wed Mar 8 02:54:05 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4310 * m68k-dis.c (opcode): New function. Returns address of opcode
4311 table entry given index, even if the opcode table was split to
4312 work around gcc bugs.
4313 (print_insn_m68k): Call opcode instead of referencing m68k_opcodes
4315 (BREAK_UP_BIG_DECL): Make secondary array static and const.
4316 (reg_names): Now const.
4317 (print_insn_arg): Arrays cacheFieldName and names now const.
4318 (print_indexed): Array scales now const.
4320 Tue Mar 7 16:41:21 1995 Ian Lance Taylor <ian@cygnus.com>
4322 * ppc-opc.c: Sort recently added instructions by minor opcode
4323 number within major opcode number.
4325 Mon Mar 6 10:04:36 1995 Jeff Law (law@snake.cs.utah.edu)
4327 * hppa-dis.c: Include libhppa.h.
4329 Fri Feb 24 19:15:36 1995 Ian Lance Taylor <ian@cygnus.com>
4331 * mips-opc.c: Change dli to use M_DLI, and add dla.
4333 Mon Feb 20 23:54:38 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4335 * Makefile.in (ALL_MACHINES): Add w65-dis.o.
4337 Thu Feb 16 17:34:41 1995 Ian Lance Taylor <ian@cygnus.com>
4339 * mips-opc.c: Add r4650 mul instruction.
4341 Wed Feb 15 15:45:20 1995 Ian Lance Taylor <ian@cygnus.com>
4343 * mips-opc.c: Add uld and usd macros for unaligned double load and
4346 Tue Feb 14 13:17:37 1995 Michael Meissner <meissner@tiktok.cygnus.com>
4348 * ppc-opc.c (powerpc_opcodes): Add 403GA opcodes rfci, dccci,
4349 mfdcr, mtdcr, icbt, iccci.
4351 Thu Feb 9 12:28:13 1995 Stan Shebs <shebs@andros.cygnus.com>
4353 * i960-dis.c (struct tabent, struct sparse_tabent): Change the
4354 signed char fields to shorts, more portable.
4356 Wed Feb 8 17:29:29 1995 Stan Shebs <shebs@andros.cygnus.com>
4358 * i960-dis.c (struct tabent, struct sparse_tabent): Declare the
4359 char fields as signed chars, since they may have negative values.
4361 Mon Feb 6 10:52:06 1995 J.T. Conklin <jtc@rtl.cygnus.com>
4363 * i386-dis.c (dis386_twobyte): Add cpuid, From Charles Hannum
4364 (mycroft@netbsd.org).
4366 Mon Jan 30 12:38:00 1995 Ian Lance Taylor <ian@cygnus.com>
4368 From "Logg, Ed" <elogg@ea.com>:
4369 * ppc-opc.c (extract_bdm): Correct parenthezisation.
4370 * ppc-dis.c (print_insn_powerpc): Print .long before unrecognized
4373 Thu Jan 26 18:32:08 1995 Ian Lance Taylor <ian@cygnus.com>
4375 * ppc-opc.c: Changes based on patch from David Edelsohn
4376 <edelsohn@mhpcc.edu>.
4377 (powerpc_operands): Add operands SPRBAT and SPRG. Split TBR out of
4380 (insert_tbr): New static function.
4381 (extract_tbr): New static function.
4382 (XFXFXM_MASK, XFXM): Define.
4383 (XSPRBAT_MASK, XSPRG_MASK): Define.
4384 (powerpc_opcodes): Add instructions to access special registers by
4385 name. Add mtcr and mftbu.
4387 Tue Jan 17 10:56:43 1995 Ian Lance Taylor <ian@sanguine.cygnus.com>
4389 * mips-opc.c (P3): Define.
4390 (mips_opcodes): Add mad and madu.
4392 Sun Jan 15 16:32:59 1995 Steve Chamberlain <sac@splat>
4394 * configure.in: Add W65 support.
4395 * disassemble.c: Likewise.
4396 * w65-opc.h, w65-dis.c: New files.
4398 Wed Dec 28 22:15:33 1994 Steve Chamberlain (sac@jonny.cygnus.com)
4400 * h8300-dis.c (bfd_h8_disassemble): Add support for 2 bit
4403 Tue Dec 20 11:25:12 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4405 * mips-opc.c: Add dli as a synonym for li.
4407 Thu Dec 8 18:23:31 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
4409 * alpha-dis.c (print_insn_alpha): Handle call_pal instruction, and
4410 print something for reserved opcode values, even if it won't
4413 * mips-dis.c (_print_insn_mips): When initializing, shift right
4414 and mask, to avoid sign extension problems on the Alpha.
4416 * m68k-dis.c (print_insn_arg, case 'J'): Handle buscr and pcr
4419 Wed Nov 23 22:34:51 1994 Steve Chamberlain (sac@jonny.cygnus.com)
4421 * sh-opc.h (mov.l gbr): Get direction right.
4422 * sh-dis.c (print_insn_shx): New function.
4423 (print_insn_shl, print_insn_sh): Call print_insn_shx to
4424 print opcodes with right byte order.
4426 Thu Nov 3 19:32:22 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
4428 * ns32k-dis.c (struct ns32k_option): Renamed from struct option,
4429 to avoid conflicts with getopt.
4431 Mon Oct 31 18:48:10 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4433 * hppa-dis.c (print_insn_hppa): Read the instruction using
4434 bfd_getb32, so that it works on a little endian or 64 bit host.
4435 Remove unused local variable op.
4437 Tue Oct 25 17:07:57 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4439 * mips-opc.c: Use or instead of addu for pseudo-op move, since
4440 addu does not work correctly if -mips3.
4442 Wed Oct 19 13:40:16 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4444 * a29k-dis.c (print_special): Add special register names defined
4445 on 29030, 29040 and 29050.
4446 (print_insn): Handle new operand type 'I'.
4448 Wed Oct 12 11:59:55 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4450 * Makefile.in (INSTALL): Use top level install.sh script.
4452 Wed Oct 5 19:16:29 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4454 * sparc-dis.c: Rewrite to use bitfields, rather than a union, so
4455 that it works on a little endian host.
4457 Tue Oct 4 12:14:21 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4459 * configure.in: Use ${config_shell} when running config.bfd.
4461 Wed Sep 21 18:49:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4463 * mips-opc.c (mips_opcodes): "dabs" is only available with -mips3.
4465 Thu Sep 15 16:30:22 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4467 * a29k-dis.c (print_insn): Print the opcode.
4469 Wed Sep 14 17:52:14 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4471 * mips-opc.c (mips_opcodes): Set WR_t for sc and scd.
4473 Sun Sep 11 22:32:17 1994 Jeff Law (law@snake.cs.utah.edu)
4475 * hppa-dis.c (reg_names): Use r26-r23 for arg0-arg3.
4477 Tue Sep 6 11:37:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4479 * mips-opc.c: Set INSN_STORE_MEMORY flag for all instructions
4480 which store a value into memory.
4482 Sun Sep 04 17:58:10 1994 Richard Earnshaw (rwe@pegasus.esprit.ec.org)
4484 * configure.in, Makefile.in, disassemble.c: Add support for the ARM.
4485 * arm-dis.c, arm-opc.h: New files.
4487 Fri Aug 5 14:00:05 1994 Stan Shebs (shebs@andros.cygnus.com)
4489 * Makefile.in (ns32k-dis.o): Add dependency.
4490 * ns32k-dis.c (print_insn_arg): Declare initialized local as
4491 string, not as array of chars.
4493 Thu Jul 28 18:14:16 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4495 * sparc-dis.c (print_insn_sparc): Handle new operand type 'x'.
4497 * sparc-opc.c: Added sparclite extended FP operations, and
4498 versions of v9 impdep* instructions permitting specification of
4501 Tue Jul 26 16:36:03 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4503 * i960-dis.c (reg_names): Now const.
4504 (struct sparse_tabent): New type, copied from array type in mem
4506 (ctrl): Local static array ctrl_tab now const.
4507 (cobr): Local static array cobr_tab now const.
4508 (mem): Local variables reg1, reg2, reg3 now point to const. Local
4509 static variable mem_tab no longer explicitly initialized. Changed
4510 mem_init to const array of struct sparse_tabent.
4511 (reg): Local static variable reg_tab no longer explicitly
4512 initialized. Changed reg_init to const array of struct
4514 (ea): Local static array scale_tab now const.
4516 * i960-dis.c (reg): Added i960JX instructions to reg_init table.
4519 Tue Jul 19 21:00:00 1994 DJ Delorie (dj@ctron.com)
4521 * configure.bat: the disassember needs to be enabled for
4522 "objdump -d" to work in djgpp.
4524 Wed Jul 13 18:01:58 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4526 * ns32k-dis.c: Deleted all code in "#ifdef GDB".
4527 (invalid_float): Enabled general version, doesn't require running
4528 on ns32k host. Changed to take char* argument, and test for
4529 explicitly specified sizes, instead of using sizeof() on host CPU
4531 (INVALID_FLOAT): Cast first argument.
4532 (opt_u, opt_U, opt_O, opt_C, opt_S, list_P532, list_M532,
4533 list_P032, list_M032): Now const.
4534 (optlist, list_search): Made appropriate arguments now point to
4536 (print_insn_arg): Changed static array of one-character-string
4537 pointers into a static const array of characters; fixed sprintf
4538 statement accordingly.
4540 Sun Jul 10 00:27:47 1994 Ian Dall (dall@hfrd.dsto.gov.au)
4542 * opcodes/ns32k-dis.c: Semi-new file. Had apparently been dropped
4543 from distribution. A ns32k-dis.c from a previous distribution has
4544 been brought up to date and supports the new interface.
4546 * disassemble.c: define ARCH_ns32k and add case bfd_arch_ns32k.
4548 * configure.in: add bfd_ns32k_arch target support.
4550 * Makefile.in: add ns32k-dis.o to ALL_MACHINES.
4551 Add ns32k-dis.c to CFILES. Add dependencies for ns32k-dis.o.
4553 Wed Jun 29 22:10:37 1994 Steve Chamberlain (sac@cygnus.com)
4555 * h8300-dis.c (bfd_h8_disassemble): Get 16bit branch
4558 Tue Jun 28 13:22:06 1994 Stan Shebs (shebs@andros.cygnus.com)
4560 * h8300-dis.c, mips-dis.c: Don't use true and false.
4562 Thu Jun 23 12:53:19 1994 David J. Mackenzie (djm@rtl.cygnus.com)
4564 * configure.in: Change --with-targets to --enable-targets.
4566 Wed Jun 22 13:38:32 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4568 * mips-dis.c (_print_insn_mips): Build a static hash table mapping
4569 opcodes to the first instruction with that opcode, to speed
4570 disassembly of large files. From ralphc@pyramid.com (Ralph
4573 Tue Jun 7 12:49:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4575 * Makefile.in (mostlyclean): Fix typo (was mostyclean).
4577 Wed May 11 22:32:00 1994 DJ Delorie (dj@ctron.com)
4579 * configure.bat: update to latest makefile.in
4581 Sat May 7 17:13:21 1994 Steve Chamberlain (sac@cygnus.com)
4583 * a29k-dis.c (print_insn): Print 'x' type operand in hex.
4584 * h8300-dis.c (bfd_h8_disassemble): Print 16bit rels correctly.
4585 * sh-dis.c (print_insn_sh): Don't recur endlessly if delay
4586 slot insn is in a delay slot.
4587 * z8k-opc.h: (resflg): Fix patterns.
4588 * h8500-opc.h Fix CR insn patterns.
4590 Fri May 6 14:34:46 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4592 * ppc-opc.c (powerpc_opcodes): Put PowerPC versions of "cmp" and
4593 "cmpl" before POWER versions, so that gas -many uses them.
4595 Thu Apr 28 18:32:36 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4597 * disassemble.c: New file.
4598 * Makefile.in (OFILES): Add disassemble.o.
4599 (disassemble.o): Provide dependencies; compile with $(ARCHDEFS).
4600 * configure.in: Define ARCHDEFS in Makefile. Code taken from
4601 binutils/configure.in.
4603 * m68k-dis.c (print_insn_m68k): If F_ALIAS flag is set, skip the
4604 opcode being examined.
4606 Thu Apr 21 17:08:40 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4608 * ppc-opc.c (powerpc_operands): Added RAL, RAM and RAS.
4609 (insert_ral, insert_ram, insert_ras): New functions.
4610 (powerpc_opcodes): Use RAL for load with update, RAM for lmw, and
4611 RAS for store with update.
4613 Sat Apr 16 23:41:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4615 * ppc-opc.c (powerpc_opcodes): Correct fcir. From David Edelsohn
4616 (edelsohn@npac.syr.edu).
4618 Wed Apr 6 17:11:45 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4620 * mips-opc.c (mips_opcodes): Correct operands of "nor" with an
4623 Mon Apr 4 16:30:46 1994 Doug Evans (dje@canuck.cygnus.com)
4625 * sparc-opc.c (sparc_opcodes): Fix "rd %fprs,%l0".
4627 Mon Apr 4 13:22:00 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4629 * ppc-opc.c (powerpc_operands): The signedp field has been
4630 removed, so don't initialize it. Set the PPC_OPERAND_SIGNED flag
4631 instead. Add new operand SISIGNOPT.
4632 (powerpc_opcodes): For lis, liu, addis, and cau use SISIGNOPT.
4633 Based on patch from David Edelsohn (edelsohn@npac.syr.edu).
4634 * ppc-dis.c (print_insn_powerpc): Check PPC_OPERAND_SIGNED rather
4637 Wed Mar 30 00:31:49 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4639 * i386-dis.c (struct private): Renamed to dis_private. `private'
4640 is a reserved word for dynix cc.
4642 Mon Mar 28 13:00:15 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4644 * configure.in: Change error message to refer to bfd/config.bfd
4645 rather than bfd/configure.in.
4647 Mon Mar 28 12:28:30 1994 David Edelsohn (edelsohn@npac.syr.edu)
4649 * ppc-opc.c: Define POWER2 as short alias flag.
4650 (powerpc_opcodes): Add POWER/2 opcodes lfq*, stfq*, fcir[z], and
4653 Wed Mar 23 12:23:05 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4655 * i960-dis.c (print_insn_i960): Don't read a second word for
4656 opcodes 0, 1, 2 and 3.
4658 Wed Mar 16 15:37:58 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4660 * configure.in: Don't build m68881-ext.o for bfd_m68k_arch.
4662 Mon Mar 14 14:53:50 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4664 * m68881-ext.c: Removed; no longer used.
4665 * Makefile.in: Changed accordingly.
4667 * m68k-dis.c (ext_format_68881): Don't declare.
4668 (print_insn_m68k): If an instruction uses place 'i', it uses at
4669 least four fixed bytes.
4670 (print_insn_arg): Don't bump p by 2 for case 'I', place 'i'. For
4671 extended float, convert to double using floatformat_to_double, not
4672 ieee_extended_to_double, and fetch the data before converting it.
4674 Tue Mar 8 18:12:25 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4676 * mips-opc.c: It's sqrt.s, not sqrt.w. From
4677 davidj@ICSI.Berkeley.EDU (David Johnson).
4679 Tue Feb 8 16:55:27 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4681 * ppc-opc.c (powerpc_opcodes): The POWER uses bdn[l][a] where the
4682 PowerPC uses bdnz[l][a].
4684 Tue Feb 8 00:32:28 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4686 * dis-buf.c, i386-dis.c: Include sysdep.h.
4688 Mon Feb 7 19:22:23 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4690 * configure.in (bfd_powerpc_arch): Use ppc-dis.o and ppc-opc.o.
4692 * ppc-opc.c (powerpc_opcodes): Mark POWER instructions supported
4693 by Motorola PowerPC 601 with PPC_OPCODE_601.
4694 * ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc):
4695 Disassemble Motorola PowerPC 601 instructions as well as normal
4696 PowerPC instructions.
4698 Sun Feb 6 07:45:17 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
4700 * i960-dis.c (reg, mem): Just use a static array instead of
4703 Sat Feb 5 00:04:02 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
4705 * hppa-dis.c (print_insn_hppa): For '?' and '@' only adjust the
4706 condition name index if this is for a negated condition.
4708 * hppa-dis.c (print_insn_hppa): No space before 'H' operand.
4709 Floating point format for 'H' operand is backwards from normal
4710 case (0 == double, 1 == single). For '4', '6', '7', '9', and '8'
4711 operands (fmpyadd and fmpysub), handle bizarre register
4712 translation correctly for single precision format.
4714 * hppa-dis.c (print_insn_hppa): Do not emit a space after 'F'
4715 or 'I' operands if the next format specifier is 'M' (fcmp
4716 condition completer).
4718 Feb 4 23:38:03 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4720 * ppc-opc.c (powerpc_operands): New operand type MBE to handle a
4721 single number giving a bitmask for the MB and ME fields of an M
4722 form instruction. Change NB to accept 32, and turn it into 0;
4723 also turn 0 into 32 when disassembling. Seperated SH from NB.
4724 (insert_mbe, extract_mbe): New functions.
4725 (insert_nb, extract_nb): New functions.
4726 (SC_MASK): Mask out SA and LK bits.
4727 (powerpc_opcodes): Change "cal" to use RT, D, RA rather than RT,
4728 RA, SI. Change "liu" and "cau" to use UI rather than SI. Mark
4729 "bctr" and "bctrl" as accepted by POWER. Change "rlwimi",
4730 "rlimi", "rlwimi.", "rlimi.", "rlwinm", "rlinm", "rlwinm.",
4731 "rlinm.", "rlmi", "rlmi.", "rlwnm", "rlnm", "rlwnm.", "rlnm." to
4732 use MBE rather than MB. Add "mfmq" and "mtmq" POWER instructions.
4733 (powerpc_macros): Define table of macro definitions.
4734 (powerpc_num_macros): Define.
4736 * ppc-dis.c (print_insn_powerpc): Don't skip optional operands
4737 if PPC_OPERAND_NEXT is set.
4739 Sat Jan 22 23:10:07 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4741 * i960-dis.c (print_insn_i960): Make buffer bfd_byte instead of
4742 char. Retrieve contents using bfd_getl32 instead of shifting.
4744 Fri Jan 21 19:01:39 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4746 * ppc-opc.c: New file. Opcode table for PowerPC, including
4747 opcodes for POWER (RS/6000).
4748 * ppc-dis.c: New file. PowerPC and Power (RS/6000) disassembler.
4749 * Makefile.in (ALL_MACHINES): Add ppc-dis.o and ppc-opc.o.
4750 (CFILES): Add ppc-dis.c.
4751 (ppc-dis.o, ppc-opc.o): New targets.
4752 * configure.in: Build ppc-dis.o and ppc-opc.o for bfd_rs6000_arch.
4754 Mon Jan 17 20:05:49 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
4756 * hppa-dis.c (print_insn_hppa): Handle 'N' in assembler template.
4757 No space before 'u', 'f', or 'N'.
4759 Sun Jan 16 14:20:16 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
4761 * i386-dis.c (print_insn_i386): Add FIXME comment regarding reading
4762 farther than we should.
4764 * i386-dis.c (dis386): Use Yb and Yv for scasb and scasS.
4766 Thu Jan 6 12:38:05 1994 David J. Mackenzie (djm@thepub.cygnus.com)
4768 * sparc-dis.c m68k-dis.c alpha-dis.c a29k-dis.c: Fix comments.
4770 Wed Jan 5 11:56:21 1994 David J. Mackenzie (djm@thepub.cygnus.com)
4772 * i960-dis.c (print_insn_i960): Only read word2 if the instruction
4773 needs it, to prevent reading past the end of a section.
4775 Wed Nov 17 17:20:12 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4777 * mips-opc.h: Use macro for j instruction, to support SVR4 PIC.
4778 Removed t,A case for la; always use t,A(b) case.
4780 Mon Nov 8 12:37:36 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4782 From Ted Lemen <mellon@pepper.ncd.com>
4783 * mips-dis.c (print_insn_arg): Handle 'k'.
4784 * mips-opc.c: Make cache use k, not t.
4786 Sun Nov 7 23:52:34 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4788 * alpha-opc.h, alpha-dis.c (print_insn_alpha): Add
4789 FLOAT_MEMORY_FORMAT_CODE, FLOAT_BRANCH_FORMAT_CODE, correct
4790 FLOAT_FORMAT_CODE to put out floating point register names.
4792 Mon Nov 1 18:17:51 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4794 * mips-opc.c: Use macros for jal variants, to support SVR4 PIC.
4796 Thu Oct 28 17:42:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4798 * a29k-dis.c (print_insn): Use 0x%08x, not 0x%8x.
4800 Wed Oct 27 11:48:01 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4802 * mips-opc.c (dsll, dsra, dsrl): Added '>' cases for shift counts
4803 larger than 32. Moved dsxx32 variants first for disassembler.
4805 Mon Oct 25 11:33:14 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
4807 * z8kgen.c, z8k-opc.h: Add full lda information.
4809 Tue Oct 19 12:39:25 1993 Jeffrey A Law (law@cs.utah.edu)
4811 * hppa-dis.c (print_insn_hppa): Do not emit a space after
4812 movb instructions. Any necessary space will be emitted by
4813 the code to handle nullification completers.
4815 Wed Oct 13 16:19:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4817 * mips-opc.c: Moved l.d down so that it disassembles as ldc1.
4819 Fri Oct 8 02:34:21 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4821 * alpha-opc.h: Add ldl_l, fix typo for ldq_u.
4822 * alpha-dis.c (print_insn_alpha): Add code for PAL_FORMAT_CODE.
4824 Tue Oct 5 17:47:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4826 * mips-opc.c: Correct lwu opcode value (book had it wrong).
4828 Thu Sep 30 11:26:18 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
4830 * z8k-dis.c (FETCH_DATA): get just the right amount of data.
4831 (unpack_instr): Cope with ARG_IMM4M1 type instructions.
4833 Wed Sep 29 16:24:49 1993 K. Richard Pixley (rich@sendai.cygnus.com)
4835 * m88k-dis.c (m88kdis): comment change. Remove space after
4837 (printop): handle new arg types DEC and XREG for m88110.
4839 Tue Sep 28 19:20:16 1993 Jeffrey A Law (law@snake.cs.utah.edu)
4841 * hppa-dis.c (print_insn_hppa): Handle 'z' operand
4842 type for absolute branch addresses. Delete special
4843 "ble" and "be" code in 'W' operand code.
4845 Fri Sep 24 14:08:33 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4847 * mips-opc.c: Set hazard information correctly for branch
4848 likely instructions.
4850 Fri Sep 17 04:41:17 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4852 * alpha-dis.c (print_insn_alpha), alpha-opc.h: Fix bugs, use
4853 info->fprintf_func for printing and info->print_address_func for
4856 Wed Sep 15 12:12:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4858 * mips-opc.c: Set INSN_TRAP for tXX instructions.
4860 Thu Sep 9 10:11:27 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4862 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson):
4863 Corrected second case of "b" for disassembler.
4865 Tue Sep 7 14:25:15 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4867 * mips-dis.c, m88k-dis.c: Don't include libbfd.h. Changed calls
4868 to BFD swapping routines to correspond to BFD name changes.
4870 Thu Sep 2 10:35:25 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4872 * mips-opc.c: Change div machine instruction to be z,s,t rather
4873 than s,t. Change div macro to be d,v,t rather than d,s,t.
4874 Likewise for divu, ddiv, ddivu. Added z,s,t case for drem, dremu,
4875 rem and remu which generates only the corresponding div
4876 instruction. This is for compatibility with the MIPS assembler,
4877 which only generates the simple machine instruction when an
4878 explicit destination of $0 is used.
4879 * mips-dis.c (print_insn_arg): Handle 'z' (always register zero).
4881 Thu Aug 26 17:41:44 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4883 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Set
4884 WR_31 hazard for bal, bgezal, bltzal.
4886 Thu Aug 26 17:20:02 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4888 * hppa-dis.c (print_insn_hppa): Use print function
4889 from within the disassemble_info, not fprintf_filtered.
4891 Wed Aug 25 13:51:40 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
4893 * hppa-dis.c (print_insn_hppa): Handle '|' like '>'. (From Jeff
4894 Law, law@cs.utah.edu.)
4896 Mon Aug 23 12:44:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4898 * mips-opc.c ("absu"): Removed.
4901 Fri Aug 20 10:52:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4903 * mips-opc.c: Added r6000 and r4000 instructions and macros.
4904 Changed hazard information to distinguish between memory load
4905 delays and coprocessor load delays.
4907 Wed Aug 18 15:39:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4909 * mips-opc.c: li.d uses "T,L", not "S,F". Added li.s.
4911 Tue Aug 17 09:44:42 1993 David J. Mackenzie (djm@thepub.cygnus.com)
4913 * configure.in: Don't pass cpu to config.bfd.
4915 Tue Aug 17 12:23:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4917 * m88k-dis.c (m88kdis): Make class unsigned.
4919 Thu Aug 12 15:08:18 1993 Ian Lance Taylor (ian@cygnus.com)
4921 * alpha-dis.c (print_insn_alpha): One branch format case was
4922 missing the instruction name.
4924 Wed Aug 11 19:29:39 1993 David J. Mackenzie (djm@thepub.cygnus.com)
4926 * Makefile.in (ALL_MACHINES): Renamed from DIS_LIBS.
4927 Add the arch-specific auxiliary files.
4928 (OFILES): Remove the arch-specific auxiliary files
4929 and use BFD_MACHINES instead of DIS_LIBS.
4930 * configure.in: Set BFD_MACHINES based on --with-targets option.
4932 Thu Aug 12 12:04:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4934 * mips-opc.c: Added lwc1 E,A(b) to go with lwc1 T,A(b). Similarly
4937 Sun Aug 8 15:09:30 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4939 * sparc-opc.c: Change CONST to const to deal with gcc
4940 -Dconst=__const -traditional.
4942 Fri Aug 6 10:58:55 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4944 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Took
4945 coprocessor instructions out of #if 0, and made them use new
4948 Thu Aug 5 17:11:06 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4950 * sparc-dis.c: Include ansidecl.h before opcodes/sparc.h.
4952 Fri Jul 30 18:48:15 1993 John Gilmore (gnu@cygnus.com)
4954 * sparc-opc.c: Add F_JSR, F_UNBR, or F_CONDBR flags to each branch
4955 instruction, for use by the disassembler.
4957 * sparc-dis.c (SEX): Add sign extension macro. Replace many
4958 hand-coded sign extensions that depended on 32-bit host ints.
4959 FIXME, we still depend on big-endian host bitfield ordering.
4960 (sparc_print_insn): Set the insn_info_valid field, and the
4961 other fields that describe the instruction being printed.
4963 Tue Jul 27 17:04:58 1993 Jim Wilson (wilson@sphagnum.cygnus.com)
4965 * sparc-opc.c (call): Accept all 6 addressing modes valid for
4966 `jmp' instead of just one of them.
4968 Wed Jul 21 11:43:32 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
4970 * hppa-dis.c: Move floating registers from reg_names to fp_reg_names.
4971 (fput_fp_reg_r): Renamed from fput_reg_r.
4972 (fput_fp_reg): New function.
4973 (print_insn_hppa): Use fput_fp_reg{,_r} where appropriate.
4975 * hppa-dis.c (print_insn_hppa, cases 'a', 'd'): Print space afterwards.
4977 * hppa-dis.c (print_insn_hppa, case 'd'): Use GET_COND not GET_FIELD.
4979 Mon Jul 19 13:52:21 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
4981 * hppa-dis.c (print_insn_hppa): Use extract_5r_store for 'r'.
4983 * hppa-dis.c (print_insn_hppa, case '>'): If next character is 'n',
4984 don't output a space.
4986 * hppa-dis.c (float_format_names): 10 is undefined, and 11 is quad.
4988 Sun Jul 18 16:30:02 1993 Jim Kingdon (kingdon@rtl.cygnus.com)
4990 * mips-opc.c: New file, containing opcode table from
4991 ../include/opcode/mips.h.
4992 * Makefile.in: Add it.
4994 Thu Jul 15 12:37:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4996 * m88k-dis.c: New file, moved in from gdb and changed to use the
4997 new dis-asm.h disassembler interface.
4998 * Makefile.in (DIS_LIBS): Added m88k-dis.o.
4999 (m88k-dis.o): New target.
5001 Tue Jul 13 10:04:16 1993 Ian Lance Taylor (ian@cygnus.com)
5003 * mips-dis.c (print_insn_arg, _print_insn_mips): Made pointer to
5004 argument string const char * to correspond to opcode/mips.h.
5006 Tue Jul 6 15:18:37 1993 Ian Lance Taylor (ian@cygnus.com)
5008 * mips-dis.c: Updated to account for name changes in new version
5010 * Makefile.in: Added header file dependencies.
5012 Sat Jul 3 23:47:56 1993 Doug Evans (dje@canuck.cygnus.com)
5014 * h8300-dis.c (bfd_h8_disassemble): Correct fetching of instruction.
5016 Thu Jul 1 12:23:38 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5018 * m68k-dis.c (NEXTWORD, NEXTLONG): Use ((x) ^ 0x8000) - 0x8000 to sign
5019 extend, rather than shifts.
5021 Sun Jun 20 20:56:56 1993 Ken Raeburn (raeburn@poseidon.cygnus.com)
5023 * Makefile.in: Undo 15 June change.
5025 Fri Jun 18 14:15:15 1993 Per Bothner (bothner@deneb.cygnus.com)
5027 * m68k-dis.c (print_insn_arg): Change return value to byte count
5029 * m68k-dis.c: Re-write to detect invalid operands before
5030 printing anything, so we can handle this the same way we
5031 handle invalid opcodes.
5033 Thu Jun 17 15:01:36 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
5035 * sh-dis.c, sh-opc.h: Understand some more opcodes.
5037 Wed Jun 16 13:48:05 1993 Ian Lance Taylor (ian@cygnus.com)
5039 * hppa-dis.c: Include <ansidecl.h> and sysdep.h before other
5042 Tue Jun 15 21:45:26 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5044 * sparc-dis.c: Don't declare qsort, since sysdep.h might.
5046 * configure.in: Do make sysdep.h link.
5047 * Makefile.in: Search ../include. Don't search ../bfd.
5049 Tue Jun 15 13:36:10 1993 Stu Grossman (grossman@cygnus.com)
5051 Changes from Jeff Law, law@cs.utah.edu:
5052 * hppa-dis.c: Fix typo. 'a' and 'd' were reversed.
5053 Do not print a space before the completers specified by
5056 Fri Jun 11 18:40:21 1993 Ken Raeburn (raeburn@cygnus.com)
5058 * mips-dis.c: No longer need to bomb out if HOST_64_BIT is
5059 defined, since gdb has been fixed.
5061 Changes from Jeff Law, law@cs.utah.edu:
5062 * hppa-dis.c (print_insn_hppa): Last argument to fput_reg,
5063 fput_reg_r, fput_creg, fput_const, and fputs_filtered should
5064 be a *disassemble_info, not a *FILE.
5065 * hppa-dis.c: Support 'd', '!', and 'a'.
5066 * hppa-dis.c: Support 's' to extract a 2 bit space register.
5067 * hppa-dis.c: Delete cases which are no longer needed.
5069 Fri Jun 11 07:53:48 1993 Jim Kingdon (kingdon@cygnus.com)
5071 * m68k-dis.c (print_insn_{m68k,arg}): Add MMU codes.
5073 Tue Jun 8 12:25:01 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
5075 * h8300-dis.c: New file, removed from bfd/cpu-h8300.c, with
5078 Mon Jun 7 12:58:49 1993 Per Bothner (bothner@rtl.cygnus.com)
5080 * Makefile.in (CSEARCH): Add -I../bfd for sysdep.h and bfd.h.
5081 * configure.in: No longer need to configure to get sysdep.h.
5083 Thu Jun 3 15:56:49 1993 Stu Grossman (grossman@cygnus.com)
5085 * Patches from Jeffrey Law <law@cs.utah.edu>.
5086 * hppa-dis.c: Support 'I', 'J', and 'K' in output
5087 templates for 1.1 FP computational instructions.
5089 Tue May 25 13:05:48 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5091 * h8500-dis.c (print_insn_h8500): Address argument is type
5093 * z8k-dis.c (print_insn_z8k, print_insn_z8001, print_insn_z8002):
5096 * h8500-opc.h (addr_class_type): No comma at end of enumerator.
5097 * sh-opc.h (sh_nibble_type, sh_arg_type): Ditto.
5099 * sparc-dis.c (compare_opcodes): Move static declaration to
5102 Fri May 21 14:17:37 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
5104 * sparc-dis.c (print_insn_sparc): Implement 'n' argument for unimp
5105 instruction, remove unimp hack from 'l' argument.
5107 Wed May 19 15:35:54 1993 Stu Grossman (grossman@cygnus.com)
5109 * z8k-dis.c (fetch_data): Use unsigned char to make ancient gcc's
5112 Fri May 14 15:22:46 1993 Ian Lance Taylor (ian@cygnus.com)
5114 * Based on patches from davidj@ICSI.Berkeley.EDU (David Johnson):
5115 * mips-dis.c (print_insn_arg): Handle 'C' for general coprocessor
5118 Fri May 14 00:09:14 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5120 * hppa-dis.c: Include dis-asm.h before sysdep.h. Changed some
5121 arrays of string pointers to 2-d arrays of chars, to save
5124 Thu May 6 20:51:17 1993 Fred Fish (fnf@cygnus.com)
5126 * a29k-dis.c, alpha-dis.c, i960-dis.c, sparc-dis.c, z8k-dis.c:
5127 Cast second arg to read_memory_func to "bfd_byte *", as necessary.
5129 Tue May 4 20:31:10 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5131 * hppa-dis.c: New file from Utah, adapted to new disassembler
5133 * Makefile.in: Include it.
5135 Mon Apr 26 18:17:42 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5137 * sh-dis.c, sh-opc.h: New files.
5139 Fri Apr 23 18:51:22 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5141 * alpha-dis.c, alpha-opc.h: New files.
5143 Tue Apr 6 12:54:08 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
5145 * mips-dis.c: Sign extend 'j' and 'b' arguments, delta is a signed
5148 Mon Apr 5 17:37:37 1993 John Gilmore (gnu@cygnus.com)
5150 * sparc-dis.c: Make "ta" the default trap instruction, "t" the alias.
5152 Fri Apr 2 07:24:27 1993 Ian Lance Taylor (ian@cygnus.com)
5154 * a29k-dis.c, sparc-dis.c, sparc-opc.c: Use CONST rather than
5157 Thu Apr 1 11:20:43 1993 Jim Kingdon (kingdon@cygnus.com)
5159 * sparc-dis.c: Use fprintf_func a few places where I forgot,
5160 and double percent signs a few places.
5162 * a29k-dis.c, i960-dis.c: New, merged from gdb and binutils.
5164 * i386-dis.c, m68k-dis.c, mips-dis.c, sparc-dis.c:
5165 Use info->print_address_func not print_address.
5167 * dis-buf.c (generic_print_address): New function.
5169 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5171 * Makefile.in: Add sparc-dis.c.
5172 sparc-dis.c: New file, merges binutils and gdb versions as follows:
5174 Add `add' instruction to the set that get checked
5175 for a preceding `sethi' in order to print an absolute address.
5176 * (print_insn): Disassembly prefers real instructions.
5177 (is_delayed_branch): Speed up.
5178 * sparc-opcode.h: Add ALIAS bit to aliases. Fix up opcode tables.
5179 Still missing some float ops, and needs testing.
5180 * sparc-pinsn.c (print_insn): Eliminate 'set' test, subsumed by
5181 F_ALIAS. Use printf, not fprintf, when not passing a file
5183 (compare_opcodes): Check that identical instructions have
5184 identical opcodes, complain otherwise.
5187 * Include reg_names.
5189 Use dis-asm.h/read_memory_func interface.
5191 Wed Mar 31 20:49:06 1993 K. Richard Pixley (rich@rtl.cygnus.com)
5193 * h8500-dis.c, i386-dis.c, m68k-dis.c, z8k-dis.c (fetch_data):
5194 deliberately return non-zero to setjmp from longjmp. Otherwise
5195 this code fails to compile.
5197 Wed Mar 31 17:04:31 1993 Stu Grossman (grossman@cygnus.com)
5199 * m68k-dis.c: Fix prototype for fetch_arg().
5201 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5203 * dis-buf.c: New file, for new read_memory_func interface.
5204 Makefile.in (OFILES): Include it.
5205 m68k-dis.c, i386-dis.c, h8500-dis.c, mips-dis.c, z8k-dis.c:
5206 Use new read_memory_func interface.
5208 Mon Mar 29 14:02:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5210 * h8500-dis.c (print_insn_h8500): Get sign of fp offsets right.
5211 * h8500-opc.h: Fix couple of opcodes.
5213 Wed Mar 24 02:03:36 1993 david d `zoo' zuhn (zoo at poseidon.cygnus.com)
5215 * Makefile.in: add dvi & installcheck targets
5217 Mon Mar 22 18:55:04 1993 John Gilmore (gnu@cygnus.com)
5219 * Makefile.in: Update for h8500-dis.c.
5221 Fri Mar 19 14:27:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5223 * h8500-dis.c, h8500-opc.h: New files
5225 Thu Mar 18 14:12:37 1993 Per Bothner (bothner@rtl.cygnus.com)
5227 * mips-dis.c, z8k-dis.c: Converted to use interface defined in
5228 ../include/dis-asm.h.
5229 * m68k-dis.c: New file (merge of ../binutils/m68k-pinsn.c
5230 and ../gdb/m68k-pinsn.c).
5231 * i386-dis.c: New file (merge of ../binutils/i386-pinsn.c
5232 and ../gdb/i386-pinsn.c).
5233 * m68881-ext.c: New file. Moved definition of
5234 ext_format ext_format_68881 from ../gdb/m68k-tdep.c.
5235 * Makefile.in: Adjust for new files.
5236 * i386-dis.c: Patches from John Hassey (hassey@dg-rtp.dg.com).
5237 * m68k-dis.c: Recognize '9' placement code, so (say) pflush
5238 can be dis-assembled.
5240 Wed Feb 17 09:19:47 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5242 * mips-dis.c (print_insn_arg): Now returns void.
5244 Mon Jan 11 16:09:16 1993 Fred Fish (fnf@cygnus.com)
5246 * mips-dis.c (ansidecl.h): Include for benefit of sysdep.h
5247 files that use the macros.
5249 Thu Jan 7 13:15:17 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5251 * mips-dis.c: New file, from gdb/mips-pinsn.c.
5252 * Makefile.in (DIS_LIBS): Added mips-dis.o.
5253 (CFILES): Added mips-dis.c.
5255 Thu Jan 7 07:36:33 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5257 * z8k-dis.c (print_insn_z8001, print_insn_z8002): new routines
5258 * z8kgen.c, z8k-opc.h: fix sizes of some shifts.
5260 Tue Dec 22 15:42:44 1992 Per Bothner (bothner@rtl.cygnus.com)
5262 * Makefile.in: Improve *clean rules.
5263 * configure.in: Allow a default host.
5265 Tue Nov 17 19:53:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5267 * Makefile.in: also use -I$(srcdir)/../bfd, since some sysdep
5268 files include other sysdep files
5270 Thu Nov 12 16:10:37 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5272 * z8k-dis.c z8k-opc.h z8kgen.c: checkpoint
5274 Fri Oct 9 04:56:05 1992 John Gilmore (gnu@cygnus.com)
5276 * configure.in: For host support, use ../bfd/configure.host
5277 so it stays in sync with the ../bfd/hosts database.
5279 Thu Oct 1 23:38:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5281 * configure.in: use cpu-vendor-os triple instead of nested cases
5283 Wed Sep 30 16:09:20 1992 Michael Werner (mtw@cygnus.com)
5285 * z8k-dis.c (unparse_instr): fix bug where opcode returned was
5286 *always* the wrong one.
5288 Wed Sep 30 07:42:17 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5290 * z8kgen.c: added copyright info
5292 Tue Sep 29 12:20:21 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5294 * z8k-dis.c (unparse_instr): prettier tabs
5295 * z8kgen.c -> z8k-opc.h: bug fixes in tables
5297 Fri Sep 25 12:50:32 1992 Stu Grossman (grossman at cygnus.com)
5299 * configure.in: Add ncr* configuration.
5300 * z8k-dis.c (struct instr_data_s): Make instr_asmsrc char to make
5301 picayune ANSI compilers happy.
5303 Sep 20 08:50:55 1992 Fred Fish (fnf@cygnus.com)
5305 * configure.in (i386): Make i386 and i486 synonymous for now.
5306 * configure.in (i[34]86-*-sysv4): Add my_host definition.
5308 Fri Sep 18 17:01:23 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
5310 * Makefile.in (install): Fix typo.
5312 Fri Sep 18 02:04:24 1992 John Gilmore (gnu@cygnus.com)
5314 * Makefile.in (make): Remove obsolete crud.
5315 (sparc-opc.o): Avoid Sun Make VPATH bug.
5317 Tue Sep 8 17:29:27 1992 K. Richard Pixley (rich@sendai.cygnus.com)
5319 * Makefile.in: since there are no SUBDIRS, remove rule and
5320 references of subdir_do.
5322 Tue Sep 8 17:02:58 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
5324 * Makefile.in (install): Get the library name right here too.
5325 Don't install bfd.h, since it's unrelated to this library. No
5326 subdirs to recurse into, either.
5327 (CFILES): The source file has a .c suffix, not .o.
5329 * sparc-opc.c: New file, moved from BFD.
5330 * Makefile.in (OFILES): Build it.
5332 Thu Sep 3 16:59:20 1992 Michael Werner (mtw@cygnus.com)
5334 * z8k-dis.c: fixed forward refferences of some declarations.
5336 Mon Aug 31 16:09:45 1992 Michael Werner (mtw@cygnus.com)
5338 * Makefile.in: get the name of the library right
5340 Mon Aug 31 13:47:35 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5342 * z8k-dis.c: knows how to disassemble z8k stuff
5343 * z8k-opc.h: new file full of z8000 opcodes
5347 version-control: never