opcodes/ChangeLog

   1 2009-11-05  Sebastian Pop  <sebastian.pop@amd.com>
   2             Quentin Neill  <quentin.neill@amd.com>
   3
   4         * opcodes/i386-dis.c (OP_LWPCB_E): New.
   5         (OP_LWP_E): New.
   6         (OP_LWP_I): New.
   7         (USE_XOP_8F_TABLE): New.
   8         (XOP_8F_TABLE): New.
   9         (REG_XOP_LWPCB): New.
  10         (REG_XOP_LWP): New.
  11         (XOP_09): New.
  12         (XOP_0A): New.
  13         (reg_table): Redirect REG_8F to XOP_8F_TABLE.
  14         Add entries for REG_XOP_LWPCB and REG_XOP_LWP.
  15         (xop_table): New.
  16         (get_valid_dis386): Handle USE_XOP_8F_TABLE.
  17         Use the offsets VEX_0F, VEX_0F38, and VEX_0F3A instead of their values
  18         to access to the vex_table.
  19         (OP_LWPCB_E): New.
  20         (OP_LWP_E): New.
  21         (OP_LWP_I): New.
  22         * opcodes/i386-gen.c (cpu_flag_init): Add CPU_LWP_FLAGS, CpuLWP.
  23         (cpu_flags): Add CpuLWP.
  24         (opcode_modifiers): Add VexLWP, XOP09, and XOP0A.
  25         * opcodes/i386-opc.h (CpuLWP): New.
  26         (i386_cpu_flags): Add bit cpulwp.
  27         (VexLWP): New.
  28         (XOP09): New.
  29         (XOP0A): New.
  30         (i386_opcode_modifier): Add vexlwp, xop09, and xop0a.
  31         * opcodes/i386-opc.tbl (llwpcb): Added.
  32         (lwpval): Added.
  33         (lwpins): Added.
  34
  35 2009-11-04  DJ Delorie  <dj@redhat.com>
  36
  37         * rx-decode.opc (rx_decode_opcode) (mvtipl): Add.
  38         (mvtcp, mvfcp, opecp): Remove.
  39         * rx-decode.c: Regenerate.
  40         * rx-dis.c (cpen): Remove.
  41
  42 2009-11-03  Doug Evans  <dje@sebabeach.org>
  43
  44         * m32c-desc.c: Regenerate.
  45         * mep-desc.c: Regenerate.
  46
  47 2009-11-02  Paul Brook  <paul@codesourcery.com>
  48
  49         * arm-dis.c (coprocessor_opcodes): Update to use new feature flags.
  50         Add VFPv4 instructions.
  51
  52 2009-10-29  Sebastian Pop  <sebastian.pop@amd.com>
  53
  54         * i386-dis.c (OP_VEX_FMA): Removed.
  55         (VexFMA): Removed.
  56         (Vex128FMA): Removed.
  57         (prefix_table): First source operand of FMA4 insns is decoded
  58         with Vex not with VexFMA.
  59         (OP_EX_VexW): Second source operand is decoded with get_vex_imm8
  60         when vex.w is set.  Third source operand is decoded with
  61
  62 2009-10-27  Alan Modra  <amodra@bigpond.net.au>
  63
  64         * Makefile.am (HFILES): Remove cgen-ops.h and cgen-types.h.
  65         * Makefile.in: Regenerate.
  66         * po/POTFILES.in: Regenerate.
  67
  68 2009-10-23  Doug Evans  <dje@sebabeach.org>
  69
  70         * cgen-ops.h: Delete, moved to ../include/cgen/basic-ops.h.
  71         * cgen-types.h: Delete, moved to ../include/cgen/basic-modes.h.
  72         * cgen-bitset.c: Update.
  73         * fr30-desc.h: Regenerate.
  74         * frv-desc.h: Regenerate.
  75         * ip2k-desc.h: Regenerate.
  76         * iq2000-desc.h: Regenerate.
  77         * lm32-desc.h: Regenerate.
  78         * m32c-desc.h: Regenerate.
  79         * m32c-opc.h: Regenerate.
  80         * m32r-desc.h: Regenerate.
  81         * mep-desc.h: Regenerate.
  82         * mt-desc.h: Regenerate.
  83         * openrisc-desc.h: Regenerate.
  84         * xc16x-desc.h: Regenerate.
  85         * xstormy16-desc.h: Regenerate.
  86
  87 2009-10-22  DJ Delorie  <dj@redhat.com>
  88
  89         * rx-decode.opc (decode_opcode): Fix flags for MUL, SUNTIL, and SWHILE.
  90         * rx-decode.c: Regenerated.
  91
  92 2009-10-20  H.J. Lu  <hongjiu.lu@intel.com>
  93
  94         PR gas/10775
  95         * i386-dis.c: Document LB, LS and LV macros.
  96         (dis386): Use mov%LB, mov%LS and mov%LV on mov instruction
  97         with the 64-bit displacement or immediate operand.
  98         (putop): Handle LB, LS and LV macros.
  99
 100 2009-10-18  Doug Evans  <dje@sebabeach.org>
 101
 102         * lm32-opinst.c: Regenerate.
 103         * m32c-desc.c: Regenerate.
 104         * m32r-opinst.c: Regenerate.
 105         * openrisc-ibld.c: Regenerate.
 106         * xc16x-desc.c: Regenerate.
 107         * xc16x-desc.h: Regenerate.
 108
 109 2009-10-17  Doug Evans  <dje@sebabeach.org>
 110
 111         * Makefile.am (CGEN_CPUS): Add iq2000, lm32.
 112         (FR30_DEPS, FRV_DEPS, IQ2000_DEPS): Move so all cgen *_DEPS are
 113         sorted alphabetically.
 114         (stamp-fr30, stamp-frv, stamp-iq2000, stamp-xc16x): Move so all cgen
 115         stamp-* rules are sorted alphabetically.
 116         * Makefile.in: Regenerate.
 117
 118 2009-10-16  H.J. Lu  <hongjiu.lu@intel.com>
 119
 120         * i386-opc.h: Use enum instead of nested macros.
 121
 122 2009-10-16  H.J. Lu  <hongjiu.lu@intel.com>
 123
 124         * i386-dis.c: Simplify enums.
 125
 126 2009-10-15  H.J. Lu  <hongjiu.lu@intel.com>
 127             Ineiev <ineiev@gmail.com>
 128
 129         PR binutils/10767
 130         * i386-dis.c: Use enum instead of nested macros.
 131
 132 2009-10-15  H.J. Lu  <hongjiu.lu@intel.com>
 133
 134         * i386-dis.c (MAX_BYTEMODE): Removed.
 135
 136 2009-10-14  Tomas Hurka  <tom@hukatronic.cz>
 137
 138         PR 969
 139         * m68k-opc.c (m68k_opcodes): Correct mask for macl and msacl.
 140
 141 2009-10-13  H.J. Lu  <hongjiu.lu@intel.com>
 142
 143         * i386-dis.c (print_insn): Always clear need_vex, need_vex_reg
 144         and vex_w_done.
 145
 146 2009-10-07  Michael Eager  <eager@eagercon.com>
 147
 148         * microblaze-dis.c: Add include for microblaze-dis.h,
 149         eliminate local extern decls.
 150         * microblaze-dis.h: New.
 151
 152 2009-10-06  Nick Clifton  <nickc@redhat.com>
 153
 154         * po/fi.po: Updated Finnish translation.
 155
 156 2009-10-03  Andreas Schwab  <schwab@linux-m68k.org>
 157
 158         * opc2c.c: Include "libiberty.h" and <errno.h>.
 159         (orig_filename): Constify.
 160         (dump_lines): Fix line number directive.
 161         (main): Set orig_filename to basename of input file.  Use
 162         xstrerror.
 163
 164         * Makefile.am (rx-dis.lo): Remove explicit dependencies.
 165         ($(srcdir)/rx-decode.c): Use @MAINT@.  Use $(EXEEXT_FOR_BUILD)
 166         instead of $(EXEEXT).
 167         (opc2c$(EXEEXT_FOR_BUILD)): Renamed from opc2c$(EXEEXT) and use
 168         $(LINK_FOR_BUILD).  Link with libiberty.
 169         (MOSTLYCLEANFILES): Add opc2c$(EXEEXT_FOR_BUILD).
 170         (MAINTAINERCLEANFILES): Add $(srcdir)/rx-decode.c.
 171         * Makefile.in: Regenerated.
 172         * rx-decode.c: Regenerated.
 173
 174 2009-10-03  Paul Reed  <paulreed@paddedcell.com>
 175
 176         * arm-dis.c (print_insn): Check symtab_size not *symtab.
 177
 178 2009-10-02  H.J. Lu  <hongjiu.lu@intel.com>
 179
 180         * i386-opc.tbl: Drop Disp64 on jump and loop instructions.
 181         * i386-tbl.h: Regenerated.
 182
 183 2009-10-02  Peter Bergner  <bergner@vnet.ibm.com>
 184
 185         * ppc-dis.c (ppc_opts): Add "476" entry.
 186         * ppc-opc.c (PPC476): Define.
 187         (powerpc_opcodes): Update mnemonics where required for 476.
 188
 189 2009-10-01  Peter Bergner  <bergner@vnet.ibm.com>
 190
 191         * ppc-opc.c (PPCA2): Use renamed mask PPC_OPCODE_A2.
 192         * ppc-dis.c (ppc_opts): Likewise.
 193         Rename "ppca2" to "a2".
 194
 195 2009-10-01  M R Swami Reddy <MR.Swami.Reddy@nsc.com>
 196
 197         * crx-dis.c (match_opcode): Truncate mcode to 32-bit.
 198
 199 2009-09-29  DJ Delorie  <dj@redhat.com>
 200
 201         * Makefile.am: Add RX files.
 202         * configure.in: Add support for RX target.
 203         * disassemble.c: Likewise.
 204         * Makefile.in: Regenerate.
 205         * configure: Regenerate.
 206         * opc2c.c: New file.
 207         * rx-decode.c: New file.
 208         * rx-decode.opc: New file.
 209         * rx-dis.c: New file.
 210
 211 2009-09-29  Peter Bergner  <bergner@vnet.ibm.com>
 212
 213         * ppc-opc.c (powerpc_opcodes): Remove support for the the "lxsdux",
 214         "lxvd2ux", "lxvw4ux", "stxsdux", "stxvd2ux" and "stxvw4ux" opcodes.
 215
 216 2009-09-25  Michael Eager  <eager@eagercon.com>
 217
 218         * microblaze-dis.c (get_insn_microblaze, microblaze_get_target_address,
 219         microblaze_decode_insn): Add declarations.
 220         (get_delay_slots_microblaze): Remove.
 221
 222 2009-09-25  Martin Thuresson  <martint@google.com>
 223
 224         Update sources to make arc and arm targets compile cleanly with
 225         -Wc++-compat:
 226         * arc-dis.c Fix casts.
 227         * arc-ext.c: Add casts.
 228         * arm-dis.c (enum opcode_sentinel_enum): Gave name to anonymous
 229         enum.
 230
 231 2009-09-24  H.J. Lu  <hongjiu.lu@intel.com>
 232
 233         * i386-gen.c (opcode_modifiers): Remove Vex256.
 234         (set_bitfield): Handle XXX=V.
 235
 236         * i386-opc.h (Vex): Update comments.
 237         (Vex256): Removed.
 238         (VexNDS): Updated.
 239         (i386_opcode_modifier): Change vex to 2 bits.  Remove vex256.
 240
 241         * i386-opc.tbl: Replace "Vex|Vex256" with Vex=2.
 242         * i386-tbl.h: Regenerated.
 243
 244 2009-09-23  Nick Clifton  <nickc@redhat.com>
 245
 246         * po/fr.po: Updated French translation.
 247
 248 2009-09-21  Ben Elliston  <bje@au.ibm.com>
 249             Peter Bergner  <bergner@vnet.ibm.com>
 250
 251         * ppc-dis.c (ppc_opts): Add "ppca2" entry.
 252         * ppc-opc.c (powerpc_opcodes): Add eratilx, eratsx, eratsx.,
 253         eratre, wchkall, eratwe, ldawx., mdfcrx., mfdcr. mtdcrx., icswx,
 254         icswx., mtdcr., dci, wclrone, wclrall, wclr, erativax, tlbsrx.,
 255         ici mnemonics.
 256         (ERAT_T): New operand.
 257         (XWC_MASK): New mask.
 258         (XOPL2): New macro.
 259         (PPCA2): Define.
 260
 261 2009-09-18  Nick Clifton  <nickc@redhat.com>
 262
 263         * po/es.po: Updated Spanish translation.
 264         * po/vi.po: Updated Vietnamese translation.
 265
 266 2009-09-15  H.J. Lu  <hongjiu.lu@intel.com>
 267
 268         * i386-dis.c (OP_E_memory): Don't print '-' in Intel mode if
 269         disp == -disp.
 270
 271 2009-09-14  Nick Clifton  <nickc@redhat.com>
 272
 273         * po/nl.po: Updated Dutch translation.
 274
 275 2009-09-11  Nick Clifton  <nickc@redhat.com>
 276
 277         * po/opcodes.pot: Updated by the Translation project.
 278
 279 2009-09-11  Martin Thuresson  <martint@google.com>
 280
 281         Updated sources to compile cleanly with -Wc++-compat:
 282         * ld.h (enum endian_enum,enum symbolic_enum,enum dynamic_list_enum): Move to top level.
 283         * ldcref.c: Add casts.
 284         * ldctor.c: Add casts.
 285         * ldexp.c
 286         * ldexp.h (enum node_tree_enum,enum phase_enum): Move to top level.
 287         * ldlang.c: Add casts. (lang_insert_orphan): Use enum name instead of integer.
 288         * ldlang.h (enum statement_enum): Move to top level.
 289         * ldmain.c: Add casts.
 290         * ldwrite.c: Add casts.
 291         * lexsup.c: Add casts. (enum control_enum): Move to top level.
 292         * mri.c: Add casts. (mri_draw_tree): Use enum name instead of integer.
 293
 294 2009-09-10  Andreas Krebbel  <Andreas.Krebbel@de.ibm.com>
 295
 296         * s390-dis.c (print_insn_s390): Avoid 'long long'.
 297
 298 2009-09-10  Andreas Krebbel  <Andreas.Krebbel@de.ibm.com>
 299
 300         * s390-dis.c (s390_extract_operand): Remove the shift for pcrel operands.
 301         (print_insn_s390): Signextend and shift pcrel operands before printing.
 302
 303 2009-09-09  H.J. Lu  <hongjiu.lu@intel.com>
 304
 305         * i386-dis.c (vex_len_table): Change VEX_LEN_AE_R_X_M0 to
 306         VEX_LEN_AE_R_X_M_0 in comments.
 307
 308 2009-09-08  DJ Delorie  <dj@redhat.com>
 309
 310         * mep-opc.c: Regenerate.
 311
 312 2009-09-08  Andreas Schwab  <schwab@linux-m68k.org>
 313
 314         * z8kgen.c (struct op): Replace unused flavor with id.
 315         (opt): Remove extra xorb entry.
 316         (func): Use id field as fallback.
 317         (sub): Return new string, caller changed.
 318         (internal): Allocate end marker.  Assign unique id before sorting.
 319         (gas): Likewise.  Fix loop end condition.
 320         * z8k-opc.h: Regenerate.
 321
 322 2009-09-08  Alan Modra  <amodra@bigpond.net.au>
 323
 324         * ppc-opc.c (powerpc_macros <extrdi>): Allow n+b of 64.
 325
 326 2009-09-07  Alan Modra  <amodra@bigpond.net.au>
 327
 328         * z8kgen.c (func): Fix thinko last patch.
 329
 330 2009-09-07  Alan Modra  <amodra@bigpond.net.au>
 331
 332         * z8kgen.c (func): Stabilize qsort of identically named entries.
 333         * z8k-opc.h: Regenerate.
 334
 335 2009-09-07  Tristan Gingold  <gingold@adacore.com>
 336
 337         * po/opcodes.pot: Regenerate.
 338
 339 2009-09-07  Alan Modra  <amodra@bigpond.net.au>
 340
 341         * configure.in (BUILD_LIBS, BUILD_LIB_DEPS): Define and subst.
 342         * configure: Regenerate.
 343         * Makefile.am (LIBIBERTY, BUILD_LIBIBERTY, BUILD_LIBINTL): Delete.
 344         (BUILD_LIBS, BUILD_LIB_DEPS): Define.  Use..
 345         (i386-gen, ia64-gen, z8kgen): ..here.
 346         * Makefile.in: Regenerate.
 347
 348 2009-09-07  Tristan Gingold  <gingold@adacore.com>
 349
 350         * z8k-opc.h: Regenerate.
 351
 352 2009-09-05  Martin Thuresson  <martin@mtme.org>
 353
 354         * ia64-dis.c (print_insn_ia64): Update code to use renamed member.
 355         * m88k-dis.c (m88kdis): Rename variable class to in_class.
 356         * tic80-opc.c (tic80_symbol_to_value, tic80_value_to_symbol):
 357         Rename argument class to symbol_class.
 358
 359 2009-09-04  Jie Zhang  <jie.zhang@analog.com>
 360
 361         * bfin-dis.c (decode_pseudodbg_assert_0): Change according
 362         to the new encoding of DBGA, DBGAH, and DBGAL.
 363         (_print_insn_bfin): Likewise.
 364
 365 2009-09-03  Jie Zhang  <jie.zhang@analog.com>
 366
 367         * bfin-dis.c (_print_insn_bfin): Don't declare.
 368         (print_insn_bfin): Don't declare.
 369         (dregs_pair): Remove.
 370         (ignore_bits): Remove.
 371         (ccstat): Remove.
 372
 373 2009-09-03  Jie Zhang  <jie.zhang@analog.com>
 374
 375         * bfin-dis.c (IS_DREG): Define.
 376         (IS_PREG): Define.
 377         (IS_AREG): Define.
 378         (IS_GENREG): Define.
 379         (IS_DAGREG): Define.
 380         (IS_SYSREG): Define.
 381         (decode_REGMV_0): Check illegal register move instructions.
 382
 383 2009-09-03  Dave Korn  <dave.korn.cygwin@gmail.com>
 384
 385         * Makefile.am (BUILD_LIBINTL): New variable.
 386         (i386-gen$(EXEEXT_FOR_BUILD)): Use it.
 387         (ia64-gen$(EXEEXT_FOR_BUILD)): And here.
 388         (z8kgen$(EXEEXT_FOR_BUILD)): And here.
 389         * Makefile.in: Regenerate.
 390
 391 2009-09-01  DJ Delorie  <dj@redhat.com>
 392
 393         * mep-asm.c: Regenerate.
 394         * mep-desc.c: Regenerate.
 395         * mep-opc.c: Regenerate.
 396
 397 2009-09-01  Tristan Gingold  <gingold@adacore.com>
 398
 399         * makefile.vms: Ported to Itanium VMS.  Remove useless targets and
 400         dependencies.  Remove unused FORMAT variable.
 401         * configure.com: New file to create build.com DCL script for
 402         Itanium VMS or Alpha VMS.
 403
 404 2009-08-29  Martin Thuresson  <martin@mtme.org>
 405
 406         * cris-dis.c (bytes_to_skip): Update code to use new name.
 407         * i386-dis.c (putop): Update code to use new name.
 408         * i386-gen.c (process_i386_opcodes): Update code to use
 409         new name.
 410         * i386-opc.h (struct template): Rename struct template to
 411         insn_template. Update code accordingly.
 412         * i386-tbl.h (i386_optab): Update type to use new name.
 413         * ia64-dis.c (print_insn_ia64): Rename variable template
 414         to template_val.
 415         * tic30-dis.c (struct instruction, get_tic30_instruction):
 416         Update code to use new name.
 417         * tic54x-dis.c (has_lkaddr, get_insn_size)
 418         (print_parallel_instruction, print_insn_tic54x, tic54x_get_insn):
 419         Update code to use new name.
 420         * tic54x-opc.c (tic54x_unknown_opcode, tic54x_optab):
 421         Update type to new name.
 422         * z8kgen.c (internal, gas): Rename variable new to new_op.
 423
 424 2009-08-28  H.J. Lu  <hongjiu.lu@intel.com>
 425
 426         * Makefile.am (COMPILE_FOR_BUILD): Remove BUILD_CPPFLAGS.
 427         Replace BUILD_CFLAGS with CFLAGS_FOR_BUILD.
 428         (LINK_FOR_BUILD): Replace BUILD_CFLAGS/BUILD_LDFLAGS with
 429         CFLAGS_FOR_BUILD/LDFLAGS_FOR_BUILD.
 430         * Makefile.in: Regenerated.
 431
 432 2009-08-27  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
 433
 434         * Makefile.am (bfdlibdir, bfdincludedir): Move definition ...
 435         [INSTALL_LIBBFD]: ... here, ...
 436         [INSTALL_LIBBFD]: ... and empty overrides here.
 437         [!INSTALL_LIBBFD]: (rpath_bfdlibdir): New variable.
 438         [!INSTALL_LIBBFD] (libbfd_la_LDFLAGS): Use it.
 439         * Makefile.in: Regenerate.
 440         * configure: Regenerate.
 441
 442 2009-08-26  Philippe De Muyter  <phdm@macqel.be>
 443
 444         * m68k-dis.c (print_insn_arg): Add movecr register names for
 445         coldfire v4e families.
 446
 447 2009-08-25  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
 448
 449         * Makefile.am (SUBDIRS): Build '.' before 'po'.
 450         (COMPILE_FOR_BUILD, LINK_FOR_BUILD, BUILD_LIBIBERTY)
 451         (MOSTLYCLEANFILES, MAINTAINERCLEANFILES): New variables.
 452         (i386-gen$(EXEEXT_FOR_BUILD)): Renamed from i386-gen, rewrite
 453         using *BUILD variables, depend upon $(BUILD_LIBIBERTY).
 454         (i386-gen.o): New rule.
 455         ($(srcdir)/i386-init.h): Adjust.
 456         (i386-opc.lo): Depend on $(srcdir)/i386-tbl.h.
 457         (ia64-gen$(EXEEXT_FOR_BUILD)): Rename from ia64-gen, adjust likewise.
 458         (ia64-gen.o): New rule.
 459         (ia64_asmtab_deps): New variable.
 460         ($(srcdir)/ia64-asmtab.c): Use it; adjust likewise.
 461         (ia64-opc.lo): Depend on $(srcdir)/ia64-asmtab.c.
 462         (s390-mkopc$(EXEEXT_FOR_BUILD)): Rename from s390-mkopc, adjust
 463         likewise.
 464         (s390-opc.tab): Adjust.
 465         (z8kgen$(EXEEXT_FOR_BUILD), z8kgen.o, $(srcdir)/z8k-opc.h): New
 466         rules.
 467         (z8k-dis.lo): Depend on $(srcdir)/z8k-opc.h.
 468         * Makefile.in: Regenerate.
 469         * z8kgen.c (gas): Avoid '/*' in comment.
 470         * z8k-opc.h (func): Regenerate.
 471
 472 2009-08-24  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
 473
 474         * Makefile.am (TARGET_LIBOPCODES_CFILES): New variable, taken
 475         from $(CFILES), sorted, with dis-buf.c, dis-init.c, disassemble.c,
 476         i386-gen.c, ia64-opc-a.c, ia64-opc-b.c, ia64-opc-f.c, ia64-opc-i.c,
 477         ia64-opc-m.c, ia64-opc-d.c, ia64-gen.c, ia64-asmtab.c removed, and
 478         msp430-dis.c added.
 479         (LIBOPCODES_CFILES): New variable, adding to
 480         TARGET_LIBOPCODES_CFILES also non-target library sources.
 481         (CFILES): Factorize based on $(LIBOPCODES_CFILES), adding generator
 482         files.
 483         (ALL_MACHINES): Factorize based on $(TARGET_LIBOPCODES_CFILES).
 484         (EXTRA_libopcodes_la_SOURCES): Use $(LIBOPCODES_CFILES).
 485         * Makefile.in: Regenerate.
 486         * po/POTFILES.in: Regenerate.
 487
 488 2009-08-22  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
 489
 490         * Makefile.am (libopcodes_la_LDFLAGS): Initialize early.
 491         [INSTALL_LIBBFD] (bfdlib_LTLIBRARIES): Set only in this condition.
 492         [INSTALL_LIBBFD] (bfdinclude_DATA): New.
 493         [!INSTALL_LIBBFD] (noinst_LTLIBRARIES): New.
 494         [!INSTALL_LIBBFD] (libopcodes_la_LDFLAGS): Ensure libopcodes.la
 495         is built shared even if it is not to be installed.
 496         (install-bfdlibLTLIBRARIES,uninstall-bfdlibLTLIBRARIES)
 497         (install_libopcodes, uninstall_libopcodes): Remove.
 498         (AM_CPPFLAGS): Renamed from ...
 499         (INCLUDES): ... this.
 500         * Makefile.in: Regenerate.
 501
 502         * Makefile.am (AUTOMAKE_OPTIONS): Remove 1.9 and cygnus, add
 503         1.11, foreign, no-dist.
 504         (MKDEP, m32c_opc_h): Remove variables.
 505         (disassemble.lo): Rewrite using automake-style dependency
 506         tracking rules; only list the dependency upon the primary source
 507         file, but no included headers.
 508         (m32c-asm.lo, m32c-desc.lo, m32c-dis.lo, m32c-ibld.lo, m32c-opc.lo)
 509         (i386-gen.o, ia64-gen.o): Remove dependency statements.
 510         (EXTRA_libopcodes_la_SOURCES): New variable, list $(CFILES) to
 511         ensure all dependency fragments are included in the Makefile.
 512         (s390-opc.lo): Depend on s390-opc.tab.
 513         (DEP, DEP1, dep.sed, dep, dep-in, dep-am): Remove rules.
 514         (mkdep section): Remove.
 515         * Makefile.in: Regenerate.
 516         * po/POTFILES.in: Regenerate.
 517
 518         * Makefile.am (install-pdf, install-html): Remove.
 519         * Makefile.in: Regenerate.
 520
 521         * Makefile.in: Regenerate.
 522         * aclocal.m4: Likewise.
 523         * config.in: Likewise.
 524         * configure: Likewise.
 525
 526 2009-08-06  Michael Eager <eager@eagercon.com>
 527
 528         * Makefile.am: Add microblaze-opc.h to HFILES, microblaze-dis.c to
 529         CFILES, microblaze-dis.lo to ALL_MACHINES, targets.
 530         * Makefile.in: Regenerate.
 531         * configure.in: Add bfd_microblaze_arch target.
 532         * configure: Regenerate.
 533         * disassemble.c: Define ARCH_microblaze, return
 534         print_insn_microblaze().
 535         * microblaze-dis.c: New MicroBlaze disassembler.
 536         * microblaze-opc.h: New MicroBlaze opcode definitions.
 537         * microblaze-opcm.h: New MicroBlaze opcode types.
 538
 539 2009-07-25  H.J. Lu  <hongjiu.lu@intel.com>
 540
 541         * configure.in: Handle bfd_l1om_arch.
 542         * disassemble.c (disassembler): Likewise.
 543
 544         * configure: Regenerated.
 545
 546         * i386-dis.c (print_insn): Handle bfd_mach_l1om and
 547         bfd_mach_l1om_intel_syntax.  Use 8 bytes per line for Intel L1OM.
 548
 549         * i386-gen.c (cpu_flag_init): Set CPU_UNKNOWN_FLAGS to ~CpuL1OM.
 550         Add CPU_L1OM_FLAGS.
 551         (cpu_flags): Add CpuL1OM.
 552         (set_bitfield): Take an argument to set the value field.
 553         (process_i386_cpu_flag): Support ~CpuXXX and ~(CpuXXX|CpuYYY).
 554         (process_i386_opcode_modifier): Updated.
 555         (process_i386_operand_type): Likewise.
 556         * i386-init.h: Regenerated.
 557         * i386-tbl.h: Likewise.
 558
 559         * i386-opc.h (CpuL1OM): New.
 560         (CpuXsave): Updated.
 561         (i386_cpu_flags): Add cpul1om.
 562
 563 2009-07-24  Jan Beulich  <jbeulich@novell.com>
 564
 565         * i386-dis.c (fgrps): Correct annotation for feni/fdisi. Add
 566         frstpm.
 567         * i386-gen.c (cpu_flag_init): Add FP enabling flags where needed.
 568         (cpu_flags): Add Cpu8087, Cpu287, Cpu387, Cpu687, and CpuFISTTP.
 569         (set_bitfield): Expand CpuFP to Cpu8087|Cpu287|Cpu387.
 570         * i386-opc.h (Cpu8087, Cpu287, Cpu387, Cpu687, CpuFISTTP):
 571         Define.
 572         (union i386_cpu_flags): Add cpu8087, cpu287, cpu387, cpu687,
 573         and cpufisttp.
 574         * i386-opc.tbl: Qualify floating point instructions by their
 575         respective CpuXXX flag. Fix fucom{,p,pp}, fprem1, fsin, fcos,
 576         and fsincos to be avilable only on 387. Fix fstsw ax to be
 577         available only on 287+. Add f{,n}eni, f{,n}disi, f{,n}setpm,
 578         and frstpm.
 579         * i386-init.h, i386-tbl.h: Regenerate.
 580
 581 2009-07-20  Nick Clifton  <nickc@redhat.com>
 582
 583         PR 10288
 584         * arm-dis.c (arm_opcodes): Catch non-zero bits 8-11 in register
 585         offset or indexed based addressing mode 3.
 586
 587 2009-07-14  Nick Clifton  <nickc@redhat.com>
 588
 589         PR 10288
 590         * arm-dis.c (arm_opcodes): Catch illegal Addressing Mode 1
 591         patterns.
 592         (arm_decode_shift): Catch illegal register based shifts.
 593         (print_insn_arm): Properly handle negative register r0
 594         post-indexed addressing.
 595
 596 2009-07-10  Doug Kwan  <dougkwan@google.com>
 597
 598         * arm-disc.c (print_insn_coprocessor, print_insn_arm):  Print only
 599         lower 32 bits of long types to make hexadecimal output consistent
 600         on both 32-bit and 64-bit hosts.
 601
 602 2009-07-10  Alan Modra  <amodra@bigpond.net.au>
 603
 604         * fr30-desc.c, * fr30-desc.h, * fr30-opc.c, * fr30-opc.h,
 605         * frv-desc.c, * frv-desc.h, * frv-opc.c, * frv-opc.h,
 606         * ip2k-desc.c, * ip2k-desc.h, * ip2k-opc.c, * ip2k-opc.h,
 607         * iq2000-desc.c, * iq2000-desc.h, * iq2000-opc.c, * iq2000-opc.h,
 608         * lm32-desc.c, * lm32-desc.h, * lm32-opc.c, * lm32-opc.h,
 609         * lm32-opinst.c, * m32c-desc.c, * m32c-desc.h, * m32c-opc.c,
 610         * m32c-opc.h, * m32r-desc.c, * m32r-desc.h, * m32r-opc.c,
 611         * m32r-opc.h, * m32r-opinst.c, * mt-desc.c, * mt-desc.h,
 612         * mt-opc.c, * mt-opc.h, * openrisc-desc.c, * openrisc-desc.h,
 613         * openrisc-opc.c, * openrisc-opc.h, * xc16x-desc.c, * xc16x-desc.h,
 614         * xc16x-opc.c, * xc16x-opc.h, * xstormy16-desc.c, * xstormy16-desc.h,
 615         * xstormy16-opc.c, * xstormy16-opc.h: Regenerate.
 616
 617 2009-07-07  Chung-Lin Tang  <cltang@pllab.cs.nthu.edu.tw>
 618
 619         * arm-dis.c (coprocessor_opcodes): Fix mask for waddbhus.
 620
 621 2009-07-07  Nick Clifton  <nickc@redhat.com>
 622
 623         PR 10288
 624         * arm-dis.c (arm_opcodes): Be more strict about decoding scaled
 625         addressing modes.
 626
 627 2009-07-06  DJ Delorie  <dj@redhat.com>
 628
 629         * mep-desc.c: Regenerate.
 630         * mep-desc.h: Regenerate.
 631         * mep-opc.c: Regenerate.
 632         * mep-opc.h: Regenerate.
 633
 634 2009-07-06  Dwarakanath Rajagopal  <dwarak.rajagopal@amd.com>
 635
 636         * i386-opc.h (CpuFMA4): Add CpuFMA4.
 637         (i386_cpu_flags): New.
 638         * i386-gen.c: Add CPU_FMA4_FLAGS.
 639         * i386-opc.tbl: Add FMA4 instructions.
 640         * i386-tbl.h: Regenerate.
 641         * i386-init.h: Regenerate.
 642         * i386-dis.c (OP_VEX_FMA): New. Handle FMA4.
 643         (OP_XMM_VexW): Ditto.
 644         (OP_EX_VexW): Ditto.
 645         (VEXI4_Fixup): Ditto.
 646         (VexI4, VexFMA, Vex128FMA, EXVexW, EXdVexW, XMVexW): New Macros.
 647         (PREFIX_VEX_3A5C, PREFIX_VEX_3A5D, PREFIX_VEX_3A5E): New.
 648         (PREFIX_VEX_3A5F, PREFIX_VEX_3A60): New.
 649         (PREFIX_VEX_3A68, PREFIX_VEX_3A69, PREFIX_VEX_3A6A): New.
 650         (PREFIX_VEX_3A6B, PREFIX_VEX_3A6C, PREFIX_VEX_3A6D): New.
 651         (PREFIX_VEX_3A6E, PREFIX_VEX_3A6F, PREFIX_VEX_3A7A): New.
 652         (PREFIX_VEX_3A7B, PREFIX_VEX_3A7C, PREFIX_VEX_3A7D): New.
 653         (PREFIX_VEX_3A7E, PREFIX_VEX_3A7F): New.
 654         (VEX_LEN_3A6A_P_2,VEX_LEN_3A6B_P_2, VEX_LEN_3A6E_P_2): New.
 655         (VEX_LEN_3A6F_P_2,VEX_LEN_3A7A_P_2, VEX_LEN_3A7B_P_2): New.
 656         (VEX_LEN_3A7E_P_2,VEX_LEN_3A7F_P_2): New.
 657         (get_vex_imm8): New. handle FMA4.
 658         (OP_EX_VexReg): Ditto.
 659
 660 2009-06-30  Nick Clifton  <nickc@redhat.com>
 661
 662         PR 10288
 663         * arm-dis.c (coprocessor): Print the LDC and STC versions of the
 664         LFM and SFM instructions as comments,.
 665         Improve consistency of formatting for instructions displayed as
 666         comments and decimal values displayed with their hexadecimal
 667         equivalents.
 668         Formatting tidy ups.
 669
 670 2009-06-29  Nick Clifton  <nickc@redhat.com>
 671
 672         PR 10288
 673         * arm-dis.c (enum opcode_sentinels): New:  Used to mark the
 674         boundary between variaant and generic coprocessor instuctions.
 675         (coprocessor): Use it.
 676         Fix architecture version of MCRR and MRRC instructions.
 677         (arm_opcdes): Fix patterns for STRB and STRH instructions.
 678         (print_insn_coprocessor): Check architecture and extension masks.
 679         Print a hexadecimal version of any decimal constant that is
 680         outside of the range of -16 to +32.
 681         (print_arm_address): Add a return value of the offset used in the
 682         adress, if it is worth printing a hexadecimal version of it.
 683         (print_insn_neon): Print a hexadecimal version of any decimal
 684         constant that is outside of the range of -16 to +32.
 685         (print_insn_arm): Likewise.
 686         (print_insn_thumb16): Likewise.
 687         (print_insn_thumb32): Likewise.
 688
 689         PR 10297
 690         * arm-dis.c (UNDEFINED_INSTRUCTION): New macro for a description
 691         of an undefined instruction.
 692         (arm_opcodes): Use it.
 693         (thumb_opcod): Use it.
 694         (thumb32_opc): Use it.
 695
 696 2009-06-23  DJ Delorie  <dj@redhat.com>
 697
 698         * mep-desc.c: Regenerate.
 699         * mep-desc.h: Regenerate.
 700         * mep-dis.c: Regenerate.
 701         * mep-ibld.c: Regenerate.
 702         * mep-opc.c: Regenerate.
 703
 704         * mep-asm.c: Regenerate.
 705         * mep-opc.c: Regenerate.
 706         * mep-opc.h: Regenerate.
 707
 708 2009-06-22  Nick Clifton  <nickc@redhat.com>
 709
 710         * po/fi.po: Updated Finish translation.
 711
 712 2009-06-22  Alan Modra  <amodra@bigpond.net.au>
 713
 714         * m32c-asm.c: Regenerate.
 715
 716 2009-06-22  Alan Modra  <amodra@bigpond.net.au>
 717
 718         * score-dis.c (print_insn_score48, print_insn_score32): Move default
 719         case label to proper lexical block.
 720         * score7-dis.c (print_insn_score32): Likewise.
 721
 722 2009-06-19  Martin Schwidefsky  <sschwidefsky@de.ibm.com>
 723
 724         * s390-opc.c (INSTR_RR_0R_OPT, INSTR_RX_0RRD_OPT, MASK_RR_0R_OPT,
 725         MASK_RX_0RRD_OPT): New instruction formats with optional arguments.
 726         * s390-opc.txt (nopr, nop): Use new instruction format.
 727
 728 2009-06-18  Nick Clifton  <nickc@redhat.com>
 729
 730         PR 10288
 731         * arm-dis.c (print_insn_coprocessor): Check that a user specified
 732         ARM architecture supports the matched instruction.
 733         (print_insn_arm): Likewise.
 734         (select_arm_features): New function.  Fills in the fields of an
 735         arm_feature_set structure based on a given arm machine number.
 736         (print_insn): Initialise an arm_feature_set structure.
 737
 738 2009-06-16  Maciej W. Rozycki  <macro@linux-mips.org>
 739
 740         * vax-dis.c (is_function_entry): Return success for synthetic
 741         symbols too.
 742         (is_plt_tail): New function.
 743         (print_insn_vax): Decode PLT entry offset longword.
 744
 745 2009-06-15  Nick Clifton  <nickc@redhat.com>
 746
 747         PR 10186
 748         * arm-dis.c (thumb32_opcodes): Fix binary value of SEV.W
 749         instruction.
 750
 751         PR 10173
 752         * cr16-dis.c (print_arg): Avoid printing the 0x prefix twice.
 753
 754 2009-06-15  Nick Clifton  <nickc@redhat.com>
 755
 756         PR 10263
 757         * arm-dis.c (print_insn): Ignore is_data if the user has requested
 758         the disassembly of data as well as instructions.
 759
 760 2009-06-11  Doug Evans  <dje@sebabeach.org>
 761
 762         * cgen.sh: Handle multiple simultaneous runs for parallel makes.
 763
 764 2009-06-11  Anthony Green  <green@moxielogic.com>
 765
 766         * moxie-opc.c (moxie_form1_opc_info): Remove branch instructions.
 767         (moxie_form3_opc_info): Add branch instructions.
 768         * moxie-dis.c (print_insn_moxie): Disassemble MOXIE_F3_PCREL
 769         encoded instructions.
 770
 771 2009-06-06  Anthony Green  <green@moxielogic.com>
 772
 773         * moxie-opc.c: Recode some MOXIE_F1_4 opcodes as MOXIE_F1_M.
 774         * moxie-dis.c (print_insn_moxie): Handle MOXIE_F1_M case.
 775
 776 2009-06-04  Alan Modra  <amodra@bigpond.net.au>
 777
 778         * dep-in.sed: Don't use \n in replacement part of s command.
 779         * Makefile.am (DEP1): LC_ALL for uniq.
 780         * Makefile.in: Regenerate.
 781
 782 2009-06-02  Nick Clifton  <nickc@redhat.com>
 783
 784         * po/nl.po: Updated Dutch translation.
 785
 786 2009-06-02  Tristan Gingold  <gingold@adacore.com>
 787
 788         * ia64-gen.c (parse_resource_users, print_dependency_table,
 789         add_dis_table_ent, finish_distable, insert_bit_table_ent,
 790         add_dis_entry, compact_distree, gen_dis_table, completer_entries_eq,
 791         get_prefix_len, compute_completer_bits, insert_opcode_dependencies,
 792         insert_completer_entry, print_completer_entry, print_completer_table,
 793         opcodes_eq, add_opcode_entry, shrink): Use ISO C syntax for functions.
 794
 795 2009-05-28  DJ Delorie  <dj@redhat.com>
 796
 797         * mep-asm.c: Regenerate.
 798         * mep-desc.c: Regenerate.
 799
 800 2009-05-26  DJ Delorie  <dj@redhat.com>
 801
 802         * mep-asm.c: Regenerate.
 803         * mep-desc.c: Regenerate.
 804         * mep-desc.h: Regenerate.
 805         * mep-dis.c: Regenerate.
 806         * mep-ibld.c: Regenerate.
 807         * mep-opc.c: Regenerate.
 808         * mep-opc.h: Regenerate.
 809
 810 2009-05-26  Nick Clifton  <nickc@redhat.com>
 811
 812         * po/id.po: Updated Indonesian translation.
 813         * po/opcodes.pot: Updated template file.
 814
 815 2009-05-26  Alan Modra  <amodra@bigpond.net.au>
 816
 817         * dep-in.sed: Don't modify .o to .lo here.  Output one filename
 818         per line with all lines having continuation backslash.  Prefix
 819         first line with "A", following lines with "B".
 820         * Makefile.am (DEP): Don't use dep.sed here.
 821         (DEP1): Run $MKDEP on single files, modify .o to .lo here.  Use
 822         dep.sed here on dependencies, sort and uniq.
 823         * Makefile.in: Regenerate.
 824
 825 2009-05-25  Tristan Gingold  <gingold@adacore.com>
 826
 827         * makefile.vms (OPT): New variable.
 828         (CFLAGS): Update compilation flags.
 829
 830 2009-05-22  DJ Delorie  <dj@redhat.com>
 831
 832         * mep-asm.c: Regenerate.
 833         * mep-desc.c: Regenerate.
 834         * mep-desc.h: Regenerate.
 835         * mep-dis.c: Regenerate.
 836         * mep-ibld.c: Regenerate.
 837         * mep-opc.c: Regenerate.
 838         * mep-opc.h: Regenerate.
 839
 840 2009-05-22  Dwarakanath Rajagopal  <dwarak.rajagopal@amd.com>
 841
 842         * i386-opc.h (Cpusse5): Delete.
 843         (i386_cpu_flags): Delete.
 844         * i386-gen.c: Remove CpuSSE5, Drex, Drexv and Drexc.
 845         * i386-opc.tbl: Remove SSE5 instructions.
 846         * i386-tbl.h: Regenerate.
 847         * i386-init.h: Regenerate.
 848         * i386-dis.c (OP_E_memeory, OP_E_extended): Remove drex handling.
 849         (print_drex_arg): Delete.
 850         (OP_DREX4): Delete.
 851         (OP_DREX3): Delete.
 852         (OP_DREX_ICMP): Delete.
 853         (OP_DREX_FCMP): Delete.
 854         (DREX_*): Delete.
 855         (THREE_BYTE_0F24, THREE_BYTE_0F25, THREE_BYTE_0f7B): Delete.
 856
 857 2009-05-22  Alan Modra  <amodra@bigpond.net.au>
 858
 859         * Makefile.am: Run "make dep-am".
 860         * Makefile.in: Regenerate.
 861         * po/POTFILES.in: Regenerate.
 862
 863 2009-05-19  DJ Delorie  <dj@redhat.com>
 864
 865         * mep-asm.c: Regenerate.
 866         * mep-opc.c: Regenerate.
 867
 868 2009-04-30  DJ Delorie  <dj@redhat.com>
 869
 870         * mep-asm.c: Regenerate.
 871         * mep-desc.c: Regenerate.
 872         * mep-desc.h: Regenerate.
 873         * mep-dis.c: Regenerate.
 874         * mep-ibld.c: Regenerate.
 875         * mep-opc.c: Regenerate.
 876         * mep-opc.h: Regenerate.
 877
 878 2009-04-17  DJ Delorie  <dj@redhat.com
 879
 880         * mep-desc.c: Regenerate.
 881         * mep-ibld.c: Regenerate.
 882         * mep-opc.c: Regenerate.
 883         * mep-opc.h: Regenerate.
 884
 885 2009-04-15  Anthony Green  <green@moxielogic.com>
 886
 887         * moxie-opc.c, moxie-dis.c: Created.
 888         * Makefile.am: Build the moxie source files.
 889         * configure.in: Add moxie support.
 890         * Makefile.in, configure: Rebuilt.
 891         * disassemble.c (disassembler): Add moxie support.
 892         (ARCH_moxie): Define.
 893
 894 2009-04-15  Jan Beulich  <jbeulich@novell.com>
 895
 896         * i386-opc.tbl (protb, protw, protd, protq): Set opcode
 897         extension to None.
 898         (pshab, pshaw, pshad, pshaq): Likewise.
 899         * i386-tbl.h: Re-generate.
 900
 901 2009-04-08  DJ Delorie  <dj@redhat.com
 902
 903         * mep-asm.c: Regenerate.
 904         * mep-desc.c: Regenerate.
 905         * mep-desc.h: Regenerate.
 906         * mep-dis.c: Regenerate.
 907         * mep-ibld.c: Regenerate.
 908         * mep-opc.c: Regenerate.
 909         * mep-opc.h: Regenerate.
 910
 911 2009-04-07  Peter Bergner  <bergner@vnet.ibm.com>
 912
 913         * ppc-opc.c (powerpc_opcodes) <"tlbilxlpid", "tlbilxpid", "tlbilxva",
 914         "tlbilx">: Use secondary opcode "18" as per the ISA 2.06 documentation.
 915         Reorder entries so the extended mnemonics are listed before tlbilx.
 916
 917 2009-04-02  Peter Bergner  <bergner@vnet.ibm.com>
 918
 919         * ppc-dis.c (powerpc_init_dialect): Do not choose a default dialect
 920         due to -many/-Many.
 921         (print_insn_powerpc): Make sure we only deprecate instructions using
 922         the original dialect and not a modified dialect due to -Many handling.
 923         Move the handling of the condition register and default operands to
 924         the end of the if/else if/else chain.
 925         * ppc-opc.c (powerpc_opcodes): Reorder the opcode table so that
 926         instructions from newer processors are listed before older ones.
 927         <"icblce", "sync", "eieio", "tlbld">: Deprecate for processors
 928         that have instructions with conflicting opcodes.
 929
 930 2009-04-01  Peter Bergner  <bergner@vnet.ibm.com>
 931
 932         * ppc-opc.c (powerpc_opcodes) <"dcbzl">: Merge the POWER4 and
 933         E500MC entries.
 934
 935 2009-04-01  Christophe Lyon  <christophe.lyon@st.com>
 936
 937         * arm-dis.c (print_insn): Print BE8 opcodes in little endianness.
 938
 939 2009-03-30  Joseph Myers  <joseph@codesourcery.com>
 940
 941         * arm-dis.c (print_insn): Also check section matches in backwards
 942         search for mapping symbol.
 943
 944 2009-03-26  H.J. Lu  <hongjiu.lu@intel.com>
 945
 946         * i386-dis.c (get_valid_dis386): Abort on unhandled table.
 947
 948 2009-03-18  Alan Modra  <amodra@bigpond.net.au>
 949
 950         * cgen-opc.c: Include alloca-conf.h rather than alloca.h.
 951         * Makefile.am: Run "make dep-am".
 952         * Makefile.in: Regenerate.
 953         * openrisc-opc.c: Regenerate.
 954
 955 2009-03-10  Nick Clifton  <nickc@redhat.com>
 956
 957         * po/id.po: Updated Indonesian translation.
 958
 959 2009-03-10  Alan Modra  <amodra@bigpond.net.au>
 960
 961         * ppc-dis.c: Include "opintl.h".
 962         (struct ppc_mopt, ppc_opts): New.
 963         (ppc_parse_cpu): New function.
 964         (powerpc_init_dialect): Use it.
 965         (print_ppc_disassembler_options): Dump options from ppc_opts.
 966         Internationalize message.
 967
 968 2009-03-06  Nick Clifton  <nickc@redhat.com>
 969
 970         * po/es.po: Updated Spanish translation.
 971
 972 2009-03-04  Alan Modra  <amodra@bigpond.net.au>
 973
 974         PR 6768
 975         * configure.in: Test for ld --as-needed support.  Link shared
 976         libopcodes against libm.
 977         * configure: Regenerate.
 978
 979 2009-03-03  Peter Bergner  <bergner@vnet.ibm.com>
 980
 981         * ppc-opc.c (powerpc_opcodes): Reorder the opcode table so that
 982         instructions from newer processors are listed before older ones.
 983
 984 2009-03-03  Alan Modra  <amodra@bigpond.net.au>
 985
 986         * Makefile.am: Run "make dep-am".
 987         (HFILES): Move lm32-desc.h and lm32-opc.h from..
 988         (CFILES): ..here.
 989         * Makefile.in: Regenerate.
 990
 991 2009-03-02  Qinwei  <qinwei@sunnorth.com.cn>
 992
 993         * score7-dis.c: New file.
 994         * Makefile.am: Add dependencies for score7-dis.c.
 995         * Makefile.in: Regenerate.
 996         * configure.in: Add score7-dis to score files.
 997         * configure: Regenerate.
 998         * score-dis.c: Add support for score7 architecture.
 999         * score-opc.h: Likewise.
1000
1001 2009-03-01  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
1002
1003         * configure: Regenerate.
1004
1005 2009-02-27  H.J. Lu  <hongjiu.lu@intel.com>
1006
1007         * i386-dis.c (OP_EX): Call OP_E_memory instead of OP_E.
1008
1009 2009-02-26  Peter Bergner  <bergner@vnet.ibm.com>
1010
1011         * ppc-dis.c (powerpc_init_dialect): Extend -Mpower7 to disassemble
1012         the power7 and the isel instructions.
1013         * ppc-opc.c (insert_xc6, extract_xc6): New static functions.
1014         (insert_dm, extract_dm): Likewise.
1015         (XB6): Update comment to include XX2 form.
1016         (WC, XC6, SHW, DMEX, UIM, XX2, XX3RC, XX4, XX2_MASK, XX2UIM_MASK,
1017         XX2BF_MASK, XX3BF_MASK, XX3SHW_MASK, XX4_MASK, XWC_MASK, POWER7): New.
1018         (RemoveXX3DM): Delete.
1019         (powerpc_opcodes): <"lfdp", "lfdpx", "mcrxr", "mftb", "mffgpr",
1020         "mftgpr">: Deprecate for POWER7.
1021         <"fres", "fres.", "frsqrtes", "frsqrtes.", "fre", "fre.", "frsqrte",
1022         "frsqrte.">: Deprecate the three operand form and enable the two
1023         operand form for POWER7 and later.
1024         <"wait">: Extend to accept optional parameter.  Enable for POWER7.
1025         <"waitsrv", "waitimpl">: Add extended opcodes.
1026         <"ldbrx", "stdbrx">: Enable for POWER7.
1027         <"cdtbcd", "cbcdtd", "addg6s">: Add POWER6 opcodes.
1028         <"bpermd", "dcbtstt", "dcbtt", "dcffix.", "dcffix", "divde.", "divde",
1029         "divdeo.", "divdeo", "divdeu.", "divdeu", "divdeuo.", "divdeuo",
1030         "divwe.", "divwe", "divweo.", "divweo", "divweu.", "divweu", "divweuo.",
1031         "divweuo", "fcfids.", "fcfids", "fcfidu.", "fcfidu", "fcfidus.",
1032         "fcfidus", "fctidu.", "fctidu", "fctiduz.", "fctiduz", "fctiwu.",
1033         "fctiwu", "fctiwuz.", "fctiwuz", "ftdiv", "ftsqrt", "lbarx", "lfiwzx",
1034         "lharx", "popcntd", "popcntw", "stbcx.", "sthcx.">: Add POWER7 opcodes.
1035         <"lxsdux", "lxsdx", "lxvdsx", "lxvw4ux", "lxvw4x", "stxsdux", "stxsdx",
1036         "stxvw4ux", "stxvw4x", "xsabsdp", "xsadddp", "xscmpodp", "xscmpudp",
1037         "xscpsgndp", "xscvdpsp", "xscvdpsxds", "xscvdpsxws", "xscvdpuxds",
1038         "xscvdpuxws", "xscvspdp", "xscvsxddp", "xscvuxddp", "xsdivdp",
1039         "xsmaddadp", "xsmaddmdp", "xsmaxdp", "xsmindp", "xsmsubadp",
1040         "xsmsubmdp", "xsmuldp", "xsnabsdp", "xsnegdp", "xsnmaddadp",
1041         "xsnmaddmdp", "xsnmsubadp", "xsnmsubmdp", "xsrdpi", "xsrdpic",
1042         "xsrdpim", "xsrdpip", "xsrdpiz", "xsredp", "xsrsqrtedp", "xssqrtdp",
1043         "xssubdp", "xstdivdp", "xstsqrtdp", "xvabsdp", "xvabssp", "xvadddp",
1044         "xvaddsp", "xvcmpeqdp.", "xvcmpeqdp", "xvcmpeqsp.", "xvcmpeqsp",
1045         "xvcmpgedp.", "xvcmpgedp", "xvcmpgesp.", "xvcmpgesp", "xvcmpgtdp.",
1046         "xvcmpgtdp", "xvcmpgtsp.", "xvcmpgtsp", "xvcpsgnsp", "xvcvdpsp",
1047         "xvcvdpsxds", "xvcvdpsxws", "xvcvdpuxds", "xvcvdpuxws", "xvcvspdp",
1048         "xvcvspsxds", "xvcvspsxws", "xvcvspuxds", "xvcvspuxws", "xvcvsxddp",
1049         "xvcvsxdsp", "xvcvsxwdp", "xvcvsxwsp", "xvcvuxddp", "xvcvuxdsp",
1050         "xvcvuxwdp", "xvcvuxwsp", "xvdivdp", "xvdivsp", "xvmaddadp",
1051         "xvmaddasp", "xvmaddmdp", "xvmaddmsp", "xvmaxdp", "xvmaxsp",
1052         "xvmindp", "xvminsp", "xvmovsp", "xvmsubadp", "xvmsubasp", "xvmsubmdp",
1053         "xvmsubmsp", "xvmuldp", "xvmulsp", "xvnabsdp", "xvnabssp", "xvnegdp",
1054         "xvnegsp", "xvnmaddadp", "xvnmaddasp", "xvnmaddmdp", "xvnmaddmsp",
1055         "xvnmsubadp", "xvnmsubasp", "xvnmsubmdp", "xvnmsubmsp", "xvrdpi",
1056         "xvrdpic", "xvrdpim", "xvrdpip", "xvrdpiz", "xvredp", "xvresp",
1057         "xvrspi", "xvrspic", "xvrspim", "xvrspip", "xvrspiz", "xvrsqrtedp",
1058         "xvrsqrtesp", "xvsqrtdp", "xvsqrtsp", "xvsubdp", "xvsubsp", "xvtdivdp",
1059         "xvtdivsp", "xvtsqrtdp", "xvtsqrtsp", "xxland", "xxlandc", "xxlnor",
1060         "xxlor", "xxlxor", "xxmrghw", "xxmrglw", "xxsel", "xxsldwi", "xxspltd",
1061         "xxspltw", "xxswapd">: Add VSX opcodes.
1062
1063 2009-02-23  H.J. Lu  <hongjiu.lu@intel.com>
1064
1065         * i386-gen.c (operand_type_init): Remove OPERAND_TYPE_VEX_IMM4.
1066         (operand_types): Remove Vex_Imm4.
1067
1068         * i386-opc.h (Vex_Imm4): Removed.
1069         (OTMax): Updated.
1070         (i386_operand_type): Remove vex_imm4.
1071
1072         * i386-opc.tbl: Remove Vex_Imm4 comments.
1073         * i386-init.h: Regenerated.
1074         * i386-tbl.h: Likewise.
1075
1076 2009-02-23  Richard Earnshaw  <rearnsha@arm.com>
1077
1078         * arm-dis.c (neon_opcodes): Correct bit-mask and patterns for
1079         vq{r}shr{u}n.s64 insnstructions.
1080
1081 2009-02-19  Peter Bergner  <bergner@vnet.ibm.com>
1082
1083         * ppc-opc.c (powerpc_opcodes) <"lfdepx", "stfdepx">: Fix the first
1084         operand to be a float point register (FRT/FRS).
1085
1086 2009-02-18  Adam Nemet  <anemet@caviumnetworks.com>
1087
1088         * mips-opc.c (mips_builtin_opcodes): Move the Octeon-specific
1089         dmfc2 and dmtc2 before the architecture-level variants.
1090
1091 2009-02-18  Pierre Muller  <muller@ics.u-strasbg.fr>
1092
1093         * fr30-opc.c: Regenerate.
1094         * frv-opc.c: Regenerate.
1095         * ip2k-opc.c: Regenerate.
1096         * iq2000-opc.c: Regenerate.
1097         * lm32-opc.c: Regenerate.
1098         * m32c-opc.c: Regenerate.
1099         * m32r-opc.c: Regenerate.
1100         * mep-opc.c: Regenerate.
1101         * mt-opc.c: Regenerate.
1102         * xc16x-opc.c: Regenerate.
1103         * xstormy16-opc.c: Regenerate.
1104         * tic54x-dis.c (print_instruction): Avoid compiler warning on
1105         sprintf call.
1106
1107 2009-02-12  Nathan Sidwell  <nathan@codesourcery.com>
1108
1109         * m68k-opc.c (m68k_opcodes): Add stldsr instruction.
1110
1111 2009-02-05  Peter Bergner  <bergner@vnet.ibm.com>
1112
1113         * ppc-opc.c: Update copyright year.
1114         (powerpc_opcodes) <"dcbt", "dcbtst">: Deprecate the Embedded operand
1115         ordering for POWER4 and later and use the correct Server ordering.
1116
1117 2009-02-04  H.J. Lu  <hongjiu.lu@intel.com>
1118
1119         AVX Programming Reference (January, 2009)
1120         * i386-dis.c (PREFIX_VEX_3A44): New.
1121         (VEX_LEN_3A44_P_2): Likewise.
1122         (PREFIX_VEX_3A48): Updated.
1123         (VEX_LEN_3A4C_P_2): Likewise.
1124         (prefix_table): Add PREFIX_VEX_3A44.
1125         (vex_table): Likewise.
1126         (vex_len_table): Add VEX_LEN_3A44_P_2.
1127
1128         * i386-opc.tbl: Add PCLMUL + AVX instructions.
1129         * i386-tbl.h: Regenerated.
1130
1131 2009-02-03  Sandip Matte  <sandip@rmicorp.com>
1132
1133         * mips-dis.c (mips_cp0_names_xlr, mips_cp0sel_names_xlr): Define.
1134         (mips_arch_choices): Add XLR entry.
1135         * mips-opc.c (XLR): Define.
1136         (mips_builtin_opcodes): Add XLR instructions.
1137
1138 2009-02-03  Carlos O'Donell  <carlos@codesourcery.com>
1139
1140         * Makefile.am: Add install-pdf target.
1141         * po/Make-in: Add install-pdf target.
1142         * Makefile.in: Regenerate.
1143
1144 2009-02-02  DJ Delorie  <dj@redhat.com>
1145
1146         * mep-asm.c: Regenerate.
1147         * mep-desc.c: Regenerate.
1148         * mep-desc.h: Regenerate.
1149         * mep-dis.c: Regenerate.
1150         * mep-ibld.c: Regenerate.
1151         * mep-opc.c: Regenerate.
1152         * mep-opc.h: Regenerate.
1153
1154 2009-01-29  Mark Mitchell  <mark@codesourcery.com>
1155
1156         * arm-dis.c (thumb32_opcodes): Correct decoding for qadd, qdadd,
1157         qsub, and qdsub.
1158
1159 2009-01-28  Chao-ying Fu  <fu@mips.com>
1160
1161         * mips-opc.c (suxc1): Add the flag of FP_D.
1162
1163 2009-01-20  Alan Modra  <amodra@bigpond.net.au>
1164
1165         * fr30-asm.c, fr30-dis.c, fr30-ibld.c, frv-asm.c, frv-dis.c,
1166         * frv-ibld.c, ip2k-asm.c, ip2k-dis.c, ip2k-ibld.c,
1167         * iq2000-asm.c, iq2000-dis.c, iq2000-ibld.c, m32c-asm.c,
1168         * m32c-dis.c, m32c-ibld.c, m32r-asm.c, m32r-dis.c,
1169         * m32r-ibld.c, mep-asm.c, mep-dis.c, mep-ibld.c, mt-asm.c,
1170         * mt-dis.c, mt-ibld.c, openrisc-asm.c, openrisc-dis.c,
1171         * openrisc-ibld.c, xc16x-asm.c, xc16x-dis.c, xc16x-ibld.c,
1172         * xstormy16-asm.c, xstormy16-dis.c, xstormy16-ibld.c: Regenerate.
1173
1174 2009-01-16  Alan Modra  <amodra@bigpond.net.au>
1175
1176         * configure.in (commonbfdlib): Delete.
1177         (SHARED_LIBADD): Add pic libiberty if such is available.
1178         * configure: Regenerate.
1179         * po/POTFILES.in: Regenerate.
1180
1181 2009-01-14  Peter Bergner  <bergner@vnet.ibm.com>
1182
1183         * ppc-dis.c (print_insn_powerpc): Skip insn if it is deprecated.
1184         * ppc-opc.c (powerpc_opcodes) <mtfsf, mtfsf.>: Deprecate the two
1185         operand form and enable the four operand form for POWER6 and later.
1186         <mtfsfi, mtfsfi.>: Deprecate the two operand form and enable the
1187         three operand form for POWER6 and later.
1188
1189 2009-01-14  Mike Frysinger  <vapier@gentoo.org>
1190
1191         * bfin-dis.c (OUTS): Use "%s" as format string.
1192
1193 2009-01-13  H.J. Lu  <hongjiu.lu@intel.com>
1194
1195         * i386-gen.c (cpu_flag_init): Remove a white space.
1196         (operand_type_init): Likewise.
1197
1198 2009-01-12  H.J. Lu  <hongjiu.lu@intel.com>
1199
1200         * i386-opc.tbl: Add NoAVX to movnti, lfence and mfence.
1201         * i386-tbl.h: Regenerated.
1202
1203 2009-01-12  H.J. Lu  <hongjiu.lu@intel.com>
1204
1205         * i386-dis.c (dis386): Use EbS on addB, orB, adcB, sbbB, andB,
1206         subB, xorB and cmpB.  Use EvS on addS, orS, adcS, sbbS, andS,
1207         subS, xorS and cmpS.
1208
1209 2009-01-10  H.J. Lu  <hongjiu.lu@intel.com>
1210
1211         * i386-gen.c (cpu_flag_init): Replace CpuP4 and CpuK6 with
1212         CpuClflush and CpuSYSCALL, respectively. Remove CpuK8.  Add
1213         CPU_COREI7_FLAGS, CPU_CLFLUSH_FLAGS and CPU_SYSCALL_FLAGS.
1214         (cpu_flags): Remove CpuP4, CpuK6 and CpuK8.  Add CpuClflush
1215         and CpuSYSCALL.
1216         (lineno): Removed.
1217         (set_bitfield): Take an argument, lineno.  Don't report lineno
1218         on error if it is -1.
1219         (process_i386_cpu_flag): Take an argument, lineno.
1220         (process_i386_opcode_modifier): Likewise.
1221         (process_i386_operand_type): Likewise.
1222         (output_i386_opcode): Likewise.
1223         (opcode_hash_entry): Add lineno.
1224         (process_i386_opcodes): Updated.
1225         (process_i386_registers): Likewise.
1226         (process_i386_initializers): Likewise.
1227
1228         * i386-opc.h (CpuP4): Removed.
1229         (CpuK6): Likewise.
1230         (CpuK8): Likewise.
1231         (CpuClflush): New.
1232         (CpuSYSCALL): Likewise.
1233         (CpuMMX): Updated.
1234         (i386_cpu_flags): Remove cpup4, cpuk6 and cpuk8.  Add
1235         cpuclflush and cpusyscall.
1236
1237         * i386-opc.tbl: Update movnti, clflush, lfence, mfence, pause,
1238         syscall and sysret.
1239         * i386-init.h: Regenerated.
1240         * i386-tbl.h: Likewise.
1241
1242 2009-01-09  H.J. Lu  <hongjiu.lu@intel.com>
1243
1244         * i386-gen.c (cpu_flag_init): Add CpuRdtscp to CPU_K8_FLAGS
1245         and CPU_AMDFAM10_FLAGS.  Add CPU_RDTSCP_FLAGS.
1246         (cpu_flags): Add CpuRdtscp.
1247         (set_bitfield): Remove CpuSledgehammer check.
1248
1249         * i386-opc.h (CpuRdtscp): New.
1250         (CpuLM): Updated.
1251         (i386_cpu_flags): Add cpurdtscp.
1252
1253         * i386-opc.tbl: Replace CpuSledgehammer with CpuRdtscp.
1254         * i386-init.h: Regenerated.
1255         * i386-tbl.h: Likewise.
1256
1257 2009-01-09  Peter Bergner  <bergner@vnet.ibm.com>
1258
1259         * ppc-opc.c (PPCNONE): Define.
1260         (NOPOWER4): Delete.
1261         (powerpc_opcodes): Initialize the new "deprecated" field.
1262
1263 2009-01-06  H.J. Lu  <hongjiu.lu@intel.com>
1264
1265         AVX Programming Reference (December, 2008)
1266         * i386-dis.c (VEX_LEN_2B_M_0): Removed.
1267         (VEX_LEN_E7_P_2_M_0): Likewise.
1268         (VEX_LEN_2C_P_1): Updated.
1269         (VEX_LEN_E8_P_2): Likewise.
1270         (vex_len_table): Remove VEX_LEN_2B_M_0 and VEX_LEN_E7_P_2_M_0.
1271         (mod_table): Likewise.
1272
1273         * i386-opc.tbl: Add 256bit vmovntdq, vmovntpd and vmovntps.
1274         * i386-tbl.h: Regenerated.
1275
1276 2009-01-05  H.J. Lu  <hongjiu.lu@intel.com>
1277
1278         * i386-gen.c (process_copyright): Update for 2009.
1279
1280         * i386-init.h: Regenerated.
1281         * i386-tbl.h: Likewise.
1282
1283 2009-01-05  H.J. Lu  <hongjiu.lu@intel.com>
1284
1285         AVX Programming Reference (December, 2008)
1286         * i386-dis.c (OP_VEX_FMA): Removed.
1287         (OP_EX_VexW): Likewise.
1288         (OP_EX_VexImmW): Likewise.
1289         (OP_XMM_VexW): Likewise.
1290         (VEXI4_Fixup): Likewise.
1291         (VPERMIL2_Fixup): Likewise.
1292         (VexI4): Likewise.
1293         (VexFMA): Likewise.
1294         (Vex128FMA): Likewise.
1295         (EXVexW): Likewise.
1296         (EXdVexW): Likewise.
1297         (EXqVexW): Likewise.
1298         (EXVexImmW): Likewise.
1299         (XMVexW): Likewise.
1300         (VPERMIL2): Likewise.
1301         (PREFIX_VEX_3A48...PREFIX_VEX_3A4A): Likewise.
1302         (PREFIX_VEX_3A5C...PREFIX_VEX_3A5F): Likewise.
1303         (PREFIX_VEX_3A68...PREFIX_VEX_3A6F): Likewise.
1304         (PREFIX_VEX_3A78...PREFIX_VEX_3A7F): Likewise.
1305         (VEX_LEN_3A6A_P_2...VEX_LEN_3A6F_P_2): Likewise.
1306         (VEX_LEN_3A7A_P_2...VEX_LEN_3A7F_P_2): Likewise.
1307         (get_vex_imm8): Likewise.
1308         (OP_EX_VexReg): Likewise.
1309         vpermil2_op): Likewise.
1310         (EXVexWdq): New.
1311         (vex_w_dq_mode): Likewise.
1312         (PREFIX_VEX_3896...PREFIX_VEX_389F): Likewise.
1313         (PREFIX_VEX_38A6...PREFIX_VEX_38AF): Likewise.
1314         (PREFIX_VEX_38B6...PREFIX_VEX_38BF): Likewise.
1315         (es_reg): Updated.
1316         (PREFIX_VEX_38DB): Likewise.
1317         (PREFIX_VEX_3A4A): Likewise.
1318         (PREFIX_VEX_3A60): Likewise.
1319         (PREFIX_VEX_3ADF): Likewise.
1320         (VEX_LEN_3ADF_P_2): Likewise.
1321         (prefix_table): Remove PREFIX_VEX_3A48...PREFIX_VEX_3A4A,
1322         PREFIX_VEX_3A5C...PREFIX_VEX_3A5F,
1323         PREFIX_VEX_3A68...PREFIX_VEX_3A6F and
1324         PREFIX_VEX_3A78...PREFIX_VEX_3A7F.  Add
1325         PREFIX_VEX_3896...PREFIX_VEX_389F,
1326         PREFIX_VEX_38A6...PREFIX_VEX_38AF and
1327         PREFIX_VEX_38B6...PREFIX_VEX_38BF.
1328         (vex_table): Likewise.
1329         (vex_len_table): Remove VEX_LEN_3A6A_P_2...VEX_LEN_3A6F_P_2
1330         and VEX_LEN_3A7A_P_2...VEX_LEN_3A7F_P_2.
1331         (putop): Support "%XW".
1332         (intel_operand_size): Handle vex_w_dq_mode.
1333
1334         * i386-opc.h (VexNDS): Add a comment for VEX NDS and VEX DDS.
1335
1336         * i386-opc.tbl: Remove vpermil2pd/vpermil2ps and old FMA
1337         instructions.  Add new FMA instructions.
1338         * i386-tbl.h: Regenerated.
1339
1340 2009-01-02  Matthias Klose  <doko@ubuntu.com>
1341
1342         * or32-opc.c (or32_print_register, or32_print_immediate,
1343         disassemble_insn): Don't rely on undefined sprintf behaviour.
1344
1345 For older changes see ChangeLog-2008
1346 \f
1347 Local Variables:
1348 mode: change-log
1349 left-margin: 8
1350 fill-column: 74
1351 version-control: never
1352 End: