1 Tue Jul 21 13:41:07 1998 Doug Evans <devans@seba.cygnus.com>
4 * cgen-opc.in (@arch@_cgen_lookup_insn): Update call to
6 (@arch@_cgen_get_insn_operands): @arch@_cgen_get_operand renamed to
7 @arch_cgen_get_int_operand.
8 * cgen-asm.in (insert_insn_normal): New arg `pc', callers updated.
9 Update call to @arch@_cgen_insert_operand.
10 (@arch@_cgen_assemble_insn): Update call to CGEN_INSERT_FN.
11 * cgen-dis.in (print_normal): Delete use of CGEN_PCREL_OFFSET.
12 (extract_insn_normal): New arg `pc', callers updated.
13 Update call to @arch@_cgen_extract_operand.
14 (print_insn): Update call to CGEN_EXTRACT_FN.
16 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
19 Mon Jul 20 12:10:37 1998 Jeffrey A Law (law@cygnus.com)
21 * m10300-opc.c: Fix load to sp and store from sp for the am33.
22 Add more multimedia instructions.
24 Thu Jul 16 18:04:46 1998 Jeffrey A Law (law@cygnus.com)
26 * m10300-opc.c (mn10300_opcodes): Fix opcode for 4 operand "mul" and
31 Mon Jul 13 18:14:24 1998 Jeffrey A Law (law@cygnus.com)
33 * mips-opc.c (pref): Enabled for the r5900.
36 Mon Jul 13 14:53:59 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
38 * i386-dis.c (ckprefix): Handle fwait specially only when it isn't
40 (dofloat): Correct test for fnstsw. Print `fnstsw %ax' rather
42 (OP_J): Remove unnecessary subtraction when 16-bit displacement
46 Fri Jul 10 23:09:56 1998 Jeffrey A Law (law@cygnus.com)
48 * m10300-opc.c (mn10300_opcodes): Fix destination operand for 3 operand
51 Wed Jul 8 11:32:44 1998 Jeffrey A Law (law@cygnus.com)
53 * m10300-dis.c (disassemble): When printing RREGs and XRREGs, map
54 from raw register #s to symbolic names to make debugging easier.
57 Thu Jul 2 17:11:27 1998 Doug Evans <devans@seba.cygnus.com>
59 * m32r-opc.h (CGEN_MIN_INSN_SIZE): New #define.
61 Wed Jul 1 16:11:16 1998 Doug Evans <devans@seba.cygnus.com>
63 * m32r-asm.c,m32r-dis.c,m32r-opc.c,m32r-opc.h: Regenerate.
65 * Makefile.am (CGENDIR): Set via configure.
67 (CGENFILES): object.scm renamed to cos.scm.
68 (run-cgen): Renamed from cgen. stamp file renamed to stamp-$prefix.
69 (stamp-m32r): Pass prefix to run-cgen.
70 * Makefile.in: Regenerate.
71 * cgen-asm.in: @arch@-opc.h renamed to @prefix@-opc.h.
74 * cgen.sh: New args cgen,prefix. Delete args scheme,schemeflags.
75 * configure.in: AC_SUBST cgen,cgendir. No longer look for guile.
76 * configure: Regenerate.
80 Tue Jun 30 09:59:37 1998 Jeffrey A Law (law@cygnus.com)
82 * m10300-opc.c: Reorder "movbu" and "movhu" instructions too.
84 Mon Jun 29 14:54:32 1998 Jeffrey A Law (law@cygnus.com)
86 * m10300-opc.c: Reorder more instructions so that we do not
87 accidentally match a mn10300 instruction when we really
88 wanted an am33 instruction.
91 Fri Jun 26 11:08:55 1998 Jeffrey A Law (law@cygnus.com)
93 * m10300-dis.c: Only recognize instructions from the currently
95 * m10300-opc.c: Add field indicating the particular variant of
96 the mn10300 each instruction is available on.
98 Fri Jun 26 12:04:21 1998 Ian Lance Taylor <ian@cygnus.com>
100 * configure.in: For bfd_vax_arch, build vax-dis.lo.
101 * Makefile.am: Rebuild dependencies.
102 (CFILES): Add vax-dis.c.
103 (ALL_MACHINES): Add vax-dis.lo.
104 * aclocal.m4: Rebuild with current libtool.
105 * configure, Makefile.in: Rebuild.
107 Fri Jun 26 12:03:20 1998 Klaus Kaempf <kkaempf@progis.de>
109 * vax-dis.c: New file, from work by Pauline Middelink
110 <middelin@polyware.iaf.nl>.
111 * disassemble.c (ARCH_vax): Define if ARCH_all.
112 (disassembler): Add case for ARCH_vax.
113 * makefile.vms: Support compilation on vms/vax.
116 Wed Jun 24 17:14:01 1998 Ian Carmichael <iancarm@cygnus.com>
118 * dvp-opc.c (DVP_OPERAND_RELOC_11_S4): Temporarily back out
119 the DVP_OPERAND_RELOC_11_S4 relocation.
123 Wed Jun 24 09:53:06 1998 Jeffrey A Law (law@cygnus.com)
125 * m10300-dis.c (print_insn_mn10300): 0xf7 opcode prefix specifies
127 (disassemble): Correctly handle FMT_D10 instructions.
129 * m10300-opc.c (mn10300_opcodes): Fix typo in IMM24 versions of the
130 am33 shift instructions.
132 * m10300-dis.c (print_insn_mn10300): 0xf9 opcode prefix specifies
134 (disassemble): Handle new instruction formats FMT_D6, FMT_D7, FMT_D8
135 FMT_D9 and FMT_D10. Handle various new opcode flags for the am33.
137 * m10300-opc.c (IMM32_HIGH8_MEM): New operand type.
138 (mn10300_opcodes): Reorder so as to try and select opcodes from
139 the core chip when multiple alternatives exist. Change several
140 am33 instructions to use IMM32_HIGH8_MEM. Fix typos in "mac" and
141 "macbu" instructions. Fix typos in a couple DSP instructions too.
144 Tue Jun 23 19:42:18 1998 Mark Alexander <marka@cygnus.com>
146 * m10200-dis.c (print_insn_mn10200): Fix various non-portabilities
147 related to sign extension and the size of ints.
149 Tue Jun 23 10:59:26 1998 Jeffrey A Law (law@cygnus.com)
151 * m10300-opc.c: Support one operand "asr", "lsr" and "asl"
152 instructions. Support (sp) addressing mode by expanding it into
156 Mon Jun 22 15:48:29 1998 Ian Carmichael <iancarm@cygnus.com>
158 * dvp-opc.c (LIMM11, LUIMM15): New symbol types
159 DVP_OPERAND_RELOC_U15_S3 and DVP_OPERAND_RELOC_11_S4 to allow labels to
160 be used as immediate values.
164 Mon Jun 22 13:36:27 1998 Jeffrey A Law (law@cygnus.com)
166 * m10300-opc.c: Support 4 byte DSP instructions.
169 Sat Jun 20 14:46:20 1998 Frank Ch. Eigler <fche@cygnus.com>
171 * mips-dis.c (_print_insn_mips): Fix argument interchange typo.
174 Fri Jun 19 16:47:06 1998 Jeffrey A Law (law@cygnus.com)
176 * m10300-opc.c: Support 6 and 7 byte am33 instructions.
179 Fri Jun 19 09:16:42 1998 Mark Alexander <marka@cygnus.com>
181 * m10200-dis.c (print_insn_mn10200): Recognize 'break' pseudo-op.
184 Fri Jun 19 09:42:51 1998 Jeffrey A Law (law@cygnus.com)
186 * m10300-opc.c: Support for 3 byte and 4 byte extended instructions
187 found on the mn10300.
190 1998-06-18 Ulrich Drepper <drepper@cygnus.com>
192 * i386-dis.c: Add support for fxsave, fxrstor, sysenter and
195 Thu Jun 18 10:22:24 1998 John Metzler <jmetzler@cygnus.com>
197 * mips-dis.c (print_insn_little_mips): Previously, instruction
198 printing references the symbol table to determine whether the
199 instruction resides in a block regular instructions or mips16
200 instructions. However, when the disassembler gets used in other
201 environments where the symbol table is not present, we no longer
202 rely in the symbol table, rather, use the low bit of the
203 instructions address to guess. There should be no change for usage
204 of the disassembler in host based programse, gdb ,objdump.
205 (print_insn_big_mips): ditto.
206 (print_insn_mips): ditto
208 Wed Jun 17 21:19:01 1998 Mark Alexander <marka@cygnus.com>
210 * m10200-dis.c (print_insn_mn10200): Don't bomb on unknown opcodes.
212 Wed Jun 17 17:49:23 1998 Jeffrey A Law (law@cygnus.com)
215 * m10300-opc.c (USP, SSP, MSP, PC, IMM4, EPSW, RN0, RM1): New
216 operands for the am33.
217 (mn10300_opcodes): Add new instructions from the am33.
219 * m10300-opc.c (mn10300_opcodes): Change opcode for "syscall".
221 Tue Jun 16 13:10:51 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
223 * i386-dis.c (index16): Add '%' to register names. Use ','
226 Sat Jun 13 11:33:55 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
228 * i386-dis.c: Don't print opcode suffix when we can figure out the
229 size (and gas can!) by register operands, or from the default
231 (putop): Handle 'A', 'B', 'L', 'P', 'Q', 'R' macros. Rename 'C'
233 (dis386, dis386_twobyte, grps): Use new suffix macros.
234 (dis386): Correct imul Ib to imul sIb. Change jnl to jge to be
235 consistent. Add suffix for call, jmp, lcall, ljmp, iret. Reverse
236 order of cmps operands to agree with Intel docs. Correct operand
237 of aad and aam (Ib -> sIb). Change ud2b from 0fb8 to 0fb9 to
238 agree with Intel docs.
239 (print_insn_x86): Print orphan fwait before other prefixes.
240 Return correct byte count for orphan fwait with prefixes. Don't
241 print `bound' operands in reverse order.
242 (ckprefix): Stop accumulating prefixes if we get fwait.
243 (OP_DIR): Print `$' before Ap operands of ljmp, lcall.
245 Fri Jun 12 13:40:38 1998 Tom Tromey <tromey@cygnus.com>
247 * po/Make-in (all-yes): If maintainer mode, depend on .pot file.
248 ($(PACKAGE).pot): Unconditionally depend on POTFILES.
250 Fri Jun 12 11:04:06 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
252 Fix problems when bfd_vma is wider than long.
253 * i386-dis.c: Make op_address and start_pc unsigned.
254 (set_op): Make parameter unsigned.
255 (print_insn_x86): Cast to bfd_vma when passing a value to
257 * ns32k-dis.c (CORE_ADDR): Don't define.
258 (print_insn_ns32k): Change type of addr to bfd_vma. Use
259 bfd_scan_vma to read back address.
260 (print_insn_arg): Change type of addr to bfd_vma. Use sprintf_vma
262 * m68k-dis.c (COERCE32): Cast to bfd_signed_vma to avoid overflow.
263 (NEXTULONG): New definition.
264 (print_insn_m68k): Avoid overflow when computing third argument of
266 (print_insn_arg): Use NEXTULONG to fetch 32 bit address values.
267 Use disp instead of val to store offset values.
268 (print_indexed): Use base_disp instead of word to store base
269 displacement, to avoid overflow.
270 * m10300-dis.c (disassemble): Cast value to long when computing
271 pc-relative address, to get correct sign extension.
273 Wed Jun 10 15:58:37 1998 Doug Evans <devans@canuck.cygnus.com>
275 * m32r-opc.c: Regenerate.
277 Tue Jun 9 14:27:57 1998 Nick Clifton <nickc@cygnus.com>
279 * arm-opc.h (thumb_opcodes): Display 'add rx, rY, #0' insns as
280 'mov rX, rY'. Patch courtesy of Tony Thompson <Tony.Thompson@arm.com>
282 Mon Jun 8 18:17:21 1998 Nick Clifton <nickc@cygnus.com>
284 * d30v-opc.c: Remove FALG_MUL32 attribyte from MULX2H insn.
286 Fri Jun 5 23:47:55 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
288 * i386-dis.c: Combine aflag and dflag into sizeflag. Change OP_*
290 (OP_DSreg): Rename from OP_DSSI.
291 (OP_ESreg): Rename from OP_ESDI.
292 (Xb, Xv, Yb, Yv): Use index reg code, not b_mode or v_mode.
294 (append_seg): Rename from append_prefix.
295 (ptr_reg): New function.
296 (dis386): Add S suffix to pushf, popf, ret, lret, enter, leave.
298 (PREFIX_ADDR): Rename from PREFIX_ADR.
299 (float_reg): Add non-broken opcodes for people who don't want
302 Fri Jun 5 19:15:04 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
304 * m68k-opc.c (tstb, tstw, tstl): Don't allow pcrel on
307 Wed Jun 3 18:56:22 1998 H.J. Lu <hjl@gnu.org>
309 * i386-dis.c (dis386): Change 0x60 to "pushaS", 0x61 to "popaS".
311 Tue Jun 2 15:06:46 1998 Geoff Keating <geoffk@ozemail.com.au>
313 * ppc-opc.c (powerpc_macros): Support shifts and rotates of size
314 0; produce error message for shifts of size 32 (or 64 for 64-bit
315 shifts), because the hardware doesn't support them.
318 Mon Jun 1 10:27:26 1998 Jeffrey A Law (law@cygnus.com)
320 * mips-opc.c (c.lt.s): Remove r5900 specific variant.
323 * vu0.h (sqc2): Fix opcode.
325 * mips-opc.c (rsqrt.s): Update based on r5900 ISA manual version 2.1
329 start-sanitize-vr5400
330 Thu May 28 08:46:09 1998 Catherine Moore <clm@cygnus.com>
332 * mips-opc.c (macc, maccu, macchi, macchiu, msac, msacu, msachi, msachiu):
333 Change pinfo to use WR_HILO.
337 Wed May 27 15:29:13 1998 Nick Clifton <nickc@cygnus.com>
339 * d30v-opc.c: Add new operand: Ra3. Change SHORT_B3, SHORT_B3b,
340 LONG_2, LONG_2b formats to use this new operand.
343 Tue May 26 20:47:48 1998 Stan Cox <scox@cygnus.com>
345 * sparc-dis.c (compute_arch_mask): Added bfd_mach_sparc_sparclite_le.
347 Tue May 26 20:45:33 1998 Mark Alexander <marka@cygnus.com>
349 * sparc-dis.c (print_insn_sparc): big endian instruction / little
353 Tue May 26 16:14:39 1998 Nick Clifton <nickc@cygnus.com>
355 * d30v-opc.c (d30v_format_table): Change definition of SHORT_B3
356 and SHORT_B3b formats to use Rb instead of Ra.
358 Add FLAG_MUL16 to MUL2XH opcode.
360 Add FLAG_ADDSUBppp to SRC and SATHp opcodes to implement extension
361 to existing 1.1.1 parallelisation prohibition procedure.
364 Fri May 22 16:00:00 1998 Doug Evans <devans@canuck.cygnus.com>
366 * cgen-asm.in (insert_normal): Handle empty fields and 64 bit hosts.
367 * cgen-dis.in (extract_normal): Likewise.
368 * m32r-asm.c,m32r-dis.c: Regenerate.
371 Fri May 22 11:44:10 1998 Doug Evans <devans@canuck.cygnus.com>
373 * dvp-opc.c (parse_dotdest): Missing dest -> xyzw.
377 Wed May 20 00:22:27 1998 Jeffrey A Law (law@cygnus.com)
379 * mips-opc.c (multu1): Add two operand variant for the r5900.
382 Tue May 19 17:36:08 1998 Ian Lance Taylor <ian@cygnus.com>
384 * mips-dis.c (print_mips16_insn_arg): Handle type ']' correctly
385 with a shift count of 0.
388 Mon May 18 14:27:06 1998 Frank Ch. Eigler <fche@cygnus.com>
390 * mips-opc.c (mult1): Add two-operand variety of mult1 for R5900.
392 Mon May 18 11:44:00 1998 Jeffrey A Law (law@cygnus.com)
394 * mips-dis.c (print_insn_arg): Handle ';' opcode completer.
395 (_print_insn_mips): Likewise.
396 * vu0.h (vopmula, vopmsub): Correctly handle opcode/operand
400 Fri May 15 14:58:31 1998 Doug Evans <devans@seba.cygnus.com>
402 * cgen-opc.c (cgen_hw_lookup_by_name): Renamed from cgen_hw_lookup.
403 (cgen_hw_lookup_by_num): New function.
406 * m32r-opc.c, m32r-opc.h: Regenerate, delete h-abort.
409 Wed May 13 17:03:59 1998 Doug Evans <devans@canuck.cygnus.com>
411 * m32r-asm.c: Regenerate (handle uppercase HIGH/SHIGH/LOW/SDA).
413 Wed May 13 14:34:31 1998 Mark Alexander <marka@cygnus.com>
415 * sparc-dis.c (print_insn_sparc): Always fetch instructions
416 as big-endian on SPARClite.
419 Tue May 12 13:39:51 1998 Nick Clifton <nickc@cygnus.com>
421 * m32r-opc.c: Regenerated - SPECIAL attribute added to some
423 * m32r-opc.h: Regenerated - SPECIAL attribute added to some
428 Tue May 12 11:46:31 1998 Richard Henderson <rth@cygnus.com>
430 * d30v-opc.c (pre_defined_register): Remove alias for r0.
434 Mon May 11 13:12:15 1998 Frank Ch. Eigler <fche@cygnus.com>
436 * mips-opc.c (break): Added 20-bit single-operand break
437 instruction for R5900 only.
440 Sun May 10 22:37:22 1998 Jeffrey A Law (law@cygnus.com)
442 * po/Make-in (install-info): New target.
444 Thu May 7 17:15:59 1998 Ian Lance Taylor <ian@cygnus.com>
446 * configure.in (WIN32LIBADD): Add -lintl on cygwin32.
447 * configure: Rebuild.
449 Thu May 7 12:49:46 1998 Frank Ch. Eigler <fche@cygnus.com>
451 * mips-opc.c (teq,tge,tgeu,tlt,tltu,tne): Added three-operand
452 variety of ISA2 instructions to set bottom ten bits of trap code.
454 Thu May 7 11:54:25 1998 Ian Lance Taylor <ian@cygnus.com>
456 * Makefile.am (config.status): Add explicit target so that
457 config.status depends upon bfd/configure.in.
458 * Makefile.in: Rebuild.
460 Thu May 7 09:33:02 1998 Frank Ch. Eigler <fche@cygnus.com>
462 * mips-opc.c (break, sdbbp): Added two-operand variety of ISA1
463 instructions to set bottom ten bits of break code.
464 * mips-dis.c (print_insn_arg): Implement 'q' operand format used
465 for above optional argument.
467 start-sanitize-cygnus
468 Wed May 6 14:47:17 1998 Doug Evans <devans@seba.cygnus.com>
470 * cgen.sh: s/@ARCH@/${ARCH}/ in opc.h generation.
471 * m32r-opc.h: Regenerate.
474 Wed May 6 15:30:06 1998 Klaus Kaempf <kkaempf@progis.de>
476 * makefile.vms: Run dec c with /nodebug.
478 Mon May 4 10:19:57 1998 Tom Tromey <tromey@cygnus.com>
480 * Makefile.in: Rebuilt.
481 * Makefile.am: Regenerated dependencies with mkdep.
483 * opintl.h (_): Define as dgettext.
485 start-sanitize-cygnus
486 Fri May 1 13:47:42 1998 Doug Evans <devans@canuck.cygnus.com>
488 * configure.in: Add support for --enable-cgen-maint.
489 * Makefile.am (M32R_DEPS): New variable.
490 (m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c): Update dependencies.
491 * aclocal.m4: Regenerate.
492 * Makefile.in: Regenerate.
493 * configure: Regenerate.
495 * Makefile.am (CGENFILES): Add minsn.scm.
498 Tue Apr 28 14:12:12 1998 Nick Clifton <nickc@cygnus.com>
500 * cgen-asm.c: Internationalised.
501 start-sanitize-cygnus
502 * cgen-asm.in: Internationalised.
503 * cgen-opc.in: Internationalised.
505 * m32r-asm.c: Internationalised.
506 * m32r-dis.c: Internationalised.
507 * m32r-opc.c: Internationalised.
509 * aclocal.m4: Regenerated.
510 * configure: Regenerated.
511 * Makefile.am (POTFILES): Remove inclusion of BFD_H.
512 * Makefile.in: Rebuild.
513 * po/POTFILES.in: Rebuilt using rule in Makefile.in.
514 * po/opcodes.pot: Rebuilt after changing POTFILES.in.
516 Tue Apr 28 13:13:13 1998 Ian Lance Taylor <ian@cygnus.com>
518 * configure.in: Call AC_ISC_POSIX near start. Move CY_GNU_GETTEXT
520 * aclocal.m4, configure: Rebuild with current tools.
522 Mon Apr 27 14:31:00 1998 Nick Clifton <nickc@cygnus.com>
524 * opintl.h: New file - contains internationalisation macros used
525 by source files in this directory.
526 * po/: New subdirectory - contains internationalisation files.
527 * po/Make-in: New file - Makefile constructor.
528 * po/POTFILES.in: New file - list of files in opcodes directory
529 that should be scan for internationalisation macros.
530 * po/opcodes.pot: New file - list of internationisation strings
531 found in files mentioned in po/POTFILES.in.
532 * Makefile.am: Add rule to build po/POTFILES.in. Add SUBDIRS
533 entry. Add intl directory to include paths.
534 * acconfig.h: Add ENABLE_NLS, HAVE_CATGETS, HAVE_GETEXT,
535 HAVE_STRCPY, HAVE_LC_MESSAGES
536 * configure.in: Add rule to build Makefile in po subdirectory.
537 * Makefile.in: Rebuilt.
538 * aclocal.m4: Rebuilt.
539 * config.in: Rebuilt.
540 * configure: Rebuilt.
541 * alpha-opc.c: Internationalised.
542 * arc-dis.c: Internationalised.
543 * arc-opc.c: Internationalised.
544 * arm-dis.c: Internationalised.
545 * cgen-asm.c: Internationalised.
547 * d30v-dis.c: Internationalised.
549 * dis-buf.c: Internationalised.
551 * dvp-dis.c: Internationalised.
552 * dvp-opc.c: Internationalised.
554 * h8300-dis.c: Internationalised.
555 * h8500-dis.c: Internationalised.
556 * i386-dis.c: Internationalised.
557 * m10200-dis.c: Internationalised.
558 * m10300-dis.c: Internationalised.
559 * m68k-dis.c: Internationalised.
560 * m88k-dis.c: Internationalised.
561 * mips-dis.c: Internationalised.
562 * ns32k-dis.c: Internationalised.
563 * opintl.h: Internationalised.
564 * ppc-opc.c: Internationalised.
565 * sparc-dis.c: Internationalised.
566 * v850-dis.c: Internationalised.
567 * v850-opc.c: Internationalised.
569 Mon Apr 27 10:33:56 1998 Doug Evans <devans@seba.cygnus.com>
571 * cgen-asm.c (cgen_current_opcode_table): Renamed from ..._data.
572 (asm_hash_table_entries): New variable.
573 (cgen_asm_init): Free asm_hash_table_entries.
574 (hash_insn_array,hash_insn_list): New functions.
575 (build_asm_hash_table): Use them. Hash macro insns as well.
576 (cgen_asm_lookup_insn): Update.
577 * cgen_dis.c (cgen_current_opcode_table): Renamed from ..._data.
578 (dis_hash_table_entries): New variable.
579 (cgen_dis_init): Free dis_hash_table_entries.
580 (hash_insn_array,hash_insn_list): New functions.
581 (build_dis_hash_table): Use them. Hash macro insns as well.
582 (cgen_dis_lookup_insn): Update.
583 * cgen-opc.c (cgen_current_opcode_table): Renamed from ..._data.
584 (cgen_set_cpu,cgen_hw_lookup,cgen_insn_count): Update.
585 (cgen_macro_insn_count): New function.
586 * cgen-opc.in (@arch@_cgen_lookup_insn): New arg alias_p.
587 All callers updated. Sanity check result of extract fn.
588 (@arch@_cgen_get_insn_operands): Change result type to void.
589 Delete args insn_value, length. New arg fields. All callers updated.
590 (@arch@_cgen_lookup_get_insn_operands): New function.
591 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
593 Fri Apr 24 16:07:57 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
595 * i386-dis.c (OP_DSSI): Print segment override.
598 Thu Apr 23 12:32:07 1998 Frank Ch. Eigler <fche@cygnus.com>
600 * mips-opc.c (msub.s): Correct mask pattern for disassembly.
604 Mon Apr 20 19:11:55 1998 Frank Ch. Eigler <fche@cygnus.com>
606 * mips-opc.c (madd.s): Correct mask pattern for disassembly.
610 Sat Apr 18 00:29:18 1998 Jeffrey A Law (law@cygnus.com)
612 * vu0.h (vlqd, vlqi): Update per revised specs.
616 Thu Apr 16 11:44:59 1998 Doug Evans <devans@canuck.cygnus.com>
618 * dvp-opc.c (parse_vif_unpackloc,insert_vif_unpackloc): Delete.
619 (vif_operands): Update.
620 (vif_get_unpackloc): Delete.
621 (state_vif_unpackloc{,_star_p}): Delete.
622 (dvp_opcode_init_parse): Update.
623 (vif_unpack_len_value): Avoid divide by zero.
627 Wed Apr 15 10:30:07 1998 Frank Ch. Eigler <fche@cygnus.com>
629 * vu0.h: Specs changed for VCALLMSR bit pattern.
630 * mips-dis.c: (print_insn_arg) Matching change.
633 Mon Apr 13 16:59:39 1998 Nick Clifton <nickc@cygnus.com>
635 * arm-dis.c (print_insn_arm): Add "_all" extension to 'C'
638 Mon Apr 13 16:50:27 1998 Ian Lance Taylor <ian@cygnus.com>
640 * Makefile.am (libopcodes_la_LIBADD): Add @WIN32LIBADD@.
641 (libopcodes_la_LDFLAGS): Add @WIN32LDFLAGS@.
642 * configure.in: Define and substitute WIN32LDFLAGS and
644 * aclocal.m4: Rebuild with new libtool.
645 * configure, Makefile.in: Rebuild.
648 Mon Apr 13 16:02:02 1998 Frank Ch. Eigler <fche@cygnus.com>
650 * vu0.h: Corrected bit pattern for VMAXI opcode.
653 Fri Apr 10 18:14:31 1998 Doug Evans <devans@canuck.cygnus.com>
655 * m32r-opc.c: Regenerate.
658 Mon Apr 6 17:16:48 1998 Doug Evans <devans@canuck.cygnus.com>
660 * dvp-opc.c (vif_macros): Tweak unpackloc operand.
661 (dvp_expand_macro): Implement.
662 (insert_vif_datalen): Record value with max+1 -> 0 conversion.
663 (vif_unpack_len): Perform 0 -> max+1 conversion on `wl' value.
666 Sun Apr 5 16:04:39 1998 H.J. Lu <hjl@gnu.org>
668 * Makefile.am (stamp-lib): Check that .libs/libopcodes.a exists
669 before trying to copy it.
670 * Makefile.in: Rebuild.
672 Thu Apr 2 17:25:49 1998 Nick Clifton <nickc@cygnus.com>
674 * m32r-opc.c: Use signed immediate values for CMPUI instruction.
677 Thu Apr 2 16:44:23 1998 Nick Clifton <nickc@cygnus.com>
679 * m32r-opc.c: Fix bit patterns for SAT and SATB.
682 Wed Apr 1 16:20:27 1998 Ian Dall <Ian.Dall@dsto.defence.gov.au>
684 * ns32k-dis.c (bit_extract_simple): New function to extract bits
685 from an arbitrary valid buffer instead of fetching them on demand
687 (invalid_float): use bit_extract_simple() instead of bit_extract().
690 Wed Apr 1 14:57:54 1998 Nick Clifton <nickc@cygnus.com>
692 * m32r-opc.c: Fix SATB bit pattern. Add extra control registers.
693 * m32r-opc.h: Add extra control registers.
696 Tue Mar 31 11:09:08 1998 Ian Lance Taylor <ian@cygnus.com>
698 From H.J. Lu <hjl@gnu.org>:
699 * i386-dis.c (dis386): Change 0x8c and 0x8e to movS, and change Ew
702 Mon Mar 30 17:32:03 1998 Ian Lance Taylor <ian@cygnus.com>
704 * Branched binutils 2.9.
707 Mon Mar 30 15:18:00 1998 Ken Raeburn <raeburn@cygnus.com>
709 * d30v-dis.c (print_insn_d30v): Don't use uninitialized "num" when
710 disassembling last 4 bytes of a section.
713 Fri Mar 27 18:08:13 1998 Ian Lance Taylor <ian@cygnus.com>
715 Fix some gcc -Wall warnings:
716 * arc-dis.c (print_insn): Add casts to avoid warnings.
717 * cgen-opc.c (cgen_keyword_lookup_name): Likewise.
718 * d10v-dis.c (dis_long, dis_2_short): Likewise.
720 * dvp-opc.c (issymchar, SKIP_BLANKS): Likewise.
721 (parse_dotdest, parse_dotdest1, u_parse_sdest): Likewise.
722 (parse_bc, parse_vfreg, parse_accdest): Likewise.
723 (parse_ffstreg, parse_vif_mode): Likewise.
725 * m10200-dis.c (disassemble): Likewise.
726 * m10300-dis.c (disassemble): Likewise.
727 * ns32k-dis.c (print_insn_ns32k): Likewise.
728 * ppc-opc.c (insert_ral, insert_ram): Likewise.
729 * cgen-dis.c (build_dis_hash_table): Remove used local variables.
730 * cgen-opc.c (cgen_keyword_search_next): Likewise.
731 * d10v-dis.c (dis_long, dis_2_short): Likewise.
733 * d30v-dis.c (print_insn_d30v, lookup_opcode): Likewise.
736 * dvp-dis.c (print_dma, print_vif, print_gif): Likewise.
737 * dvp-opc.c (parse_dest1, print_uflags): Likewise.
738 (parse_gif_nloop, dvp_opcode_init_tables): Likewise.
740 * ns32k-dis.c (bit_extract, print_insn_ns32k): Likewise.
742 * tic80-dis.c (print_one_instruction): Likewise.
744 * w65-dis.c (print_operand): Likewise.
745 * z8k-dis.c (fetch_data): Likewise.
746 * a29k-dis.c: Add return type for find_byte_func_type.
747 * arc-opc.c: Include <stdio.h>. Remove declarations of
748 insert_multshift and extract_multshift.
750 * d30v-dis.c (lookup_opcode): Parenthesize assignments in
752 (extract_value): Fully parenthesize expression.
755 * dvp-opc.c: Include <ctype.h>.
756 (print_sdest): Add default case to switch.
758 * h8500-dis.c (print_insn_h8500): Initialize local variables.
759 * h8500-opc.h (h8500_table): Fully bracket initializer.
760 * w65-opc.h (optable): Likewise.
761 * i386-dis.c (print_insn_x86): Declare aflag and flag parameters.
762 * i386-dis.c (OP_E): Initialize local variables.
763 * m10200-dis.c (print_insn_mn10200): Likewise.
764 * mips-dis.c (print_insn_mips16): Likewise.
765 * sh-dis.c (print_insn_shx): Likewise.
766 * v850-dis.c (print_insn_v850): Likewise.
767 * ns32k-dis.c (print_insn_arg): Declare.
768 (get_displacement, invalid_float): Declare.
769 (list_search, sign_extend, flip_bytes): Declare return type.
770 (get_displacement): Likewise.
771 (print_insn_arg): Likewise. Make d int. Fix sprintf format
773 (print_insn_ns32k): Make i unsigned.
774 (invalid_float): Make static. Declare type of val.
775 * tic30-dis.c (print_par_insn): Make i size_t. Don't check strlen
776 on each for iteration.
777 * tic30-dis.c (get_indirect_operand): Likewise.
778 * z8k-dis.c (print_insn_z8001): Declare return type.
779 (print_insn_z8002): Likewise.
780 (unparse_instr): Fix sprintf format strings.
782 Fri Mar 27 00:05:23 1998 Jeffrey A Law (law@cygnus.com)
784 * mips-opc.c: Add "sync.l" and "sync.p".
787 Thu Mar 26 13:27:37 1998 Doug Evans <devans@canuck.cygnus.com>
789 * dvp-opc.c (extract_vif_datalen): Rewrite.
790 (vif_insn_len): Perform 0->max+1 conversion for direct length.
792 Wed Mar 25 13:32:36 1998 Doug Evans <devans@canuck.cygnus.com>
794 * dvp-dis.c (print_insn): Print unpack address in hex.
795 * dvp-opc.c (parse_vif_mpgloc): Renamed from parse_vif_mpgloc_star.
796 Don't skip over '*', just record it.
797 (insert_vif_mpgloc): Don't update state_vif_mpgloc if '*' value.
798 (parse_vif_unpackloc): Renamed from parse_vif_unpackloc_star.
799 Don't skip over '*', just record it.
800 (insert_vif_unpackloc): Don't update state_vif_unpackloc if '*' value.
801 (vif_operands): Delete VIF_MPGLOC_STAR,VIF_UNPACKLOC_STAR entries.
802 (vif_opcodes): Likewise.
803 (state_vif_{mpg,unpack}loc_star_p): New static locals.
804 (vif_macros,vif_macro_count): New globals.
805 (vif_unpack_len_value): New arguments wl,cl. All callers updated.
806 (vif_set_{mpg,unpack}loc): Delete. All callers updated.
807 (vif_get_wl_cl): New function.
808 (dvp_opcode_init_parse): Init mpgloc,unpackloc state.
811 Wed Mar 25 14:32:48 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
813 * m68k-dis.c (print_insn_m68k): Use info->mach to select the
814 default m68k variant to recognize.
816 * i960-dis.c (pinsn): Change type of first argument to bfd_vma.
817 (ctrl, cobr, mem, ea): Likewise.
818 (print_addr): Likewise. Remove cast.
819 (ea): Cast argument of print_addr to bfd_vma.
821 * cgen-asm.c (cgen_parse_signed_integer): Fix type of local
823 (cgen_parse_unsigned_integer): Likewise.
824 (cgen_parse_address): Likewise.
826 Wed Mar 25 14:31:31 1998 Ian Lance Taylor <ian@cygnus.com>
828 * i960-dis.c (ctrl): Add full braces to structure initialization.
829 (cobr, mem, reg): Likewise.
830 (ea): Correct parenthesization in expression.
832 * cgen-asm.c: Include <ctype.h>.
833 (build_asm_hash_table): Remove unused local variable i.
834 (cgen_parse_keyword): Add casts to avoid warnings.
836 * arm-dis.c (print_insn_big_arm): Only call coffsymbol for a COFF
837 symbol. Fix indentation.
838 (print_insn_little_arm): Likewise.
841 Tue Mar 24 18:11:13 1998 Jeffrey A Law (law@cygnus.com)
843 * vu0.h (cfc2, ctc2): Add variants with ".i" and ".ni"
848 Mon Mar 23 11:32:11 1998 Nick Clifton <nickc@cygnus.com>
850 * m32r-opc.c (m32r_cgen_insn_table_entries): Fix SATH bit pattern
855 Mon Mar 23 09:45:04 1998 Doug Evans <devans@canuck.cygnus.com>
857 * dvp-opc.c (vif_operand_datalen_special): New global.
861 Sun Mar 22 13:00:14 1998 Jeffrey A Law (law@cygnus.com)
863 * vu0.h (vcallms): Use 'O' for call target operand.
864 * mips-dis.c (print_insn_arg): Handle 'O'.
867 Fri Mar 20 18:55:18 1998 Ian Lance Taylor <ian@cygnus.com>
869 * configure.in: Use AM_DISABLE_SHARED.
870 * aclocal.m4, configure: Rebuild with libtool 1.2.
873 Fri Mar 20 09:01:31 1998 Jeffrey A Law (law@cygnus.com)
875 * mips-dis.c: Change '%' to '#' in r5900 support.
879 Thu Mar 19 15:46:53 1998 Nick Clifton <nickc@cygnus.com>
881 These patches are courtesy of Jonathan Walton and Tony Thompson
882 (athompso@cambridge.arm.com).
884 * arm-dis.c (print_insn_thumb): Ignore bottom two bits of PC
887 * arm-opc.h (thumb_opcodes): Annotate PC relative addresses with
888 both the offset and the label closest to the destination.
891 Thu Mar 19 13:53:25 1998 Jeffrey A Law (law@cygnus.com)
893 * vu0.h: New file with cop2/vu0 instructions.
894 * mips-opc.c: Include vu0.h.
895 * mips-dis.c (print_insn_arg): Handle new args 0-9, +, -, %, K, &,
897 (print_insn_mips): Do not emit a tab after an instruction if the
898 first arg is an instruction completer (&). If the next arg is an
899 escape character (%), then print the next arg verbatim.
900 * Makefile.am (mips-opc.lo): Depend on vu0.h
904 Thu Mar 19 10:42:51 1998 Doug Evans <devans@canuck.cygnus.com>
906 * dvp-opc.c (vif_opcodes): Add stcycl.
908 Tue Mar 17 10:53:58 1998 Doug Evans <devans@canuck.cygnus.com>
910 * dvp-dis.c (print_dma): Change length from 16 to 8.
913 Sat Mar 14 23:47:14 1998 Doug Evans <devans@seba.cygnus.com>
915 * m32r-opc.h: Regenerate.
918 Thu Mar 12 09:18:54 1998 Doug Evans <devans@canuck.cygnus.com>
920 * dvp-opc.c (print_dest1): Print dest spec again.
921 (print_vfreg,print_accdest): Likewise.
922 (vif_unpack_len): Round result up to word boundary.
925 start-sanitize-vr4320
926 Tue Mar 10 15:57:23 1998 Gavin Koch <gavin@cygnus.com>
928 * mips-opc.c ("clz","dclz"): Added the 4320 versions.
930 Mon Mar 9 15:22:06 1998 Gavin Koch <gavin@cygnus.com>
932 * mips-opc.c ("macc*","mul*"): Added the 4320 versions
937 Fri Mar 6 11:27:53 1998 Doug Evans <devans@canuck.cygnus.com>
939 * dvp-dis.c (print_gif): Fix length calcs for gifimage.
940 (print_insn): Do mask comparison on proper opcode word.
941 Print unsigned values in hex.
942 * dvp-opc.c (u_parse_sdest): Return -1 if dest missing.
943 (parse_bc): Catch missing dest.
944 (parse_vfreg): Replace atoi call with strtol.
945 (parse_{bcftreg,ffstreg,freg,ireg,vi01,gif_prim,gif_nloop}): Likewise.
946 (parse_bcftreg,parse_ffstreg): Handle missing dest.
947 (extract_gif_eop): New function.
948 (gif_operands): Update eop entry.
949 (VGIFOP,VGIFNREGS): Fix calcs.
950 (extract_gif_prim): Set *pinvalid to 1 if prim not used.
951 (gif_regs): Add entry for unused 11 case.
952 (print_gif_regs): Print empty list instead of nothing.
953 (extract_gif_nloop): Fix value calc.
954 (print_gif_nloop): Always print value, even if 0.
955 (insert_vif_wlcl,extract_vif_wlcl): New functions.
956 (vif_operands): Use them for wl,cl fields.
957 (state_vif_wl,state_vif_cl): New static locals.
958 (parse_vif_mode): Handle numeric args.
959 (vif_unpack_len_value,vif_unpack_len): New functions.
960 (vif_insn_len): Call vif_unpack_len.
963 Wed Mar 4 12:08:14 1998 Doug Evans <devans@canuck.cygnus.com>
965 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
967 Tue Mar 3 18:51:22 1998 Doug Evans <devans@seba.cygnus.com>
969 * cgen-asm.in: Move insertion of generated routines to top of file.
970 (insert_normal): Add prototype. Delete `shift' arg.
971 * cgen-dis.in: Move insertion of generated routines to top of file.
972 (extract_normal): Add prototype. Delete `shift' arg.
973 (print_normal): Add prototype. Call CGEN_PRINT_NORMAL if defined.
974 (print_keyword): Add prototype. Fix type of `attrs' arg.
976 start-sanitize-vr4320
977 Tue Mar 3 11:47:58 1998 Gavin Koch <gavin@cygnus.com>
979 * mips-dis.c (_print_insn_mips) : Handle bfd_mach_mips4320.
980 * mips-opc.c ("mac","dmac") : Added 4320 insns.
983 Sat Feb 28 16:02:34 1998 Nick Clifton <nickc@cygnus.com>
985 * arm-dis.c (print_insn_big_arm, print_insn_little_arm): Do not
986 assume that info->symbols is non-empty.
988 Sat Feb 28 12:19:05 1998 Richard Henderson <rth@cygnus.com>
990 * alpha-opc.c (cvtqs) There is no such thing.
991 (cvttq): Missing most of the /*d variants.
994 Fri Feb 27 13:16:42 1998 Andrew Cagney <cagney@b1.cygnus.com>
996 * mips-opc.c (r5900/madd.s): Takes three operands, not four. Fix
998 (r5900/min.s): Incorrect opcode ....,101001 not ...110000.
999 (r5900/msub.s): Takes three operands, not four. Fix opcode.
1003 Thu Feb 26 15:53:09 1998 Michael Meissner <meissner@cygnus.com>
1005 * d30v-opc.c (d30v_opcode_table): Indicate which instructions are
1006 delayed branches or jumps.
1010 Fri Feb 27 10:04:19 1998 Doug Evans <devans@canuck.cygnus.com>
1012 * dvp-opc.c (vif_operands): Add unpack[u] support.
1013 (vif_opcodes): Ditto.
1014 (*_vif_imrubits): Renamed from *_vif_imrbits.
1016 Wed Feb 25 00:27:44 1998 Doug Evans <devans@canuck.cygnus.com>
1018 * dvp-dis.c (print_insn): Handle word number.
1019 Handle mips address vs vu address.
1020 * dvp-opc.c (vif_operands): Use DVP_OPERAND_VU_ADDRESS.
1021 (dma_operands): Use DVP_OPERAND_MIPS_ADDRESS.
1022 ({insert,extract}_dma_addr): Fix word ofset.
1023 ({insert,print}_gif_regs): Fix encode/decode.
1026 Tue Feb 24 10:46:44 1998 Doug Evans <devans@canuck.cygnus.com>
1028 * arm-dis.c (print_insn_{big,little}_arm): info->symbol changed
1030 * mips-dis.c (print_insn_{big,little}_mips): Likewise.
1031 * tic30-dis.c (print_branch): Likewise.
1033 * mips-dis.c (print_insn_little_mips): Call dvp_info_mach_type.
1034 * dvp-dis.c (dvp_info_mach_type): New function.
1035 (print_insn_dvp): Call it.
1036 (print_vif): Return length of 4 if mpg or direct insn so following
1037 insns get properly disabled.
1038 (print_gif): Fix word order.
1039 * dvp-opc.c (vif_insn_len): New argument `pcpu'. All callers updated.
1040 (gif_operands): Fix word order.
1041 (gif_opcodes): Likewise.
1042 ({insert,extract,print}_gif_regs): Likewise.
1043 (gif_regs): Add new register number/name changes.
1044 (dma_opcodes): Add dmarefe insn.
1047 Tue Feb 24 11:06:18 1998 Nick Clifton <nickc@cygnus.com>
1049 * arm-dis.c (print_insn_big_arm, print_insn_little_arm): Remove
1050 saved_symbol code as it is no longer needed.
1052 Mon Feb 23 13:16:17 1998 Doug Evans <devans@seba.cygnus.com>
1054 * cgen-asm.c: Include symcat.h.
1055 * cgen-dis.c,cgen-opc.c,cgen-asm.in,cgen-dis.in: Ditto.
1057 * m32r-asm.c,m32r-dis.c,m32r-opc.h,m32r-opc.c: Regenerate.
1060 Mon Feb 23 09:51:39 1998 Doug Evans <devans@canuck.cygnus.com>
1062 * dvp-opc.c (extra_dma_flags): Fix typos.
1063 (dma_operands): Fix word numbers.
1064 (dma_opcodes): Likewise.
1065 ({insert,extract}_dma_flags): Likewise.
1068 Mon Feb 23 10:34:58 1998 Jeffrey A Law (law@cygnus.com)
1070 * mips-dis.c (print_insn_arg): Do not prefix 'P' arguments with '$'.
1073 Fri Feb 20 18:02:20 1998 Doug Evans <devans@canuck.cygnus.com>
1075 * dvp-dis.c (print_gif): Complete.
1076 * dvp-opc.c (gif_operands,gif_opcodes): Complete.
1077 (state_gif_{nregs,regs,nloop}): New static locals.
1078 (*_gif_*): Complete.
1079 (dvp_opcode_init_{parse,print}): Init gif state locals.
1080 (extract_vif_datalen,{insert,extract}_vif_imrbits): New functions.
1081 (vif_insn_len): Handle `unpack'.
1082 ({insert,extract}_dma_flags): Complete.
1085 start-sanitize-r5900
1086 Fri Feb 20 01:23:16 1998 Jeffrey A Law (law@cygnus.com)
1088 * mips-opc.c (mula.s): Renamed from multa.s.
1091 Thu Feb 19 16:51:13 1998 Doug Evans <devans@canuck.cygnus.com>
1093 * m32r-opc.[ch]: Regenerate.
1096 Thu Feb 19 02:11:39 1998 Doug Evans <devans@charmed.cygnus.com>
1098 * dvp-opc.c (dma_operands): Rewrite.
1099 (dma_operand_{count,addr}): New globals.
1100 (dma_opcodes): Rewrite. Add "dmaend" with no operands.
1101 (insert_dma_addr): Insert value into insn.
1102 (extract_dma_addr): Extract value from insn.
1104 Wed Feb 18 15:46:46 1998 Doug Evans <devans@canuck.cygnus.com>
1106 * dvp-dis.c (print_vu): Handle loi insns.
1107 (print_insn): Likewise.
1108 * dvp-opc.c (vu_lower_opcodes): Add "loi".
1109 (vu_operands): Make LDEST1 a FAKE operand.
1110 (parse_dest1): Allow elided argument.
1111 (print_dest1): Don't print the argument.
1113 Tue Feb 17 18:48:25 1998 Doug Evans <devans@canuck.cygnus.com>
1115 * dvp-opc.c (parse_vfreg): Dest spec is optional.
1116 (print_vfreg): Don't print dest spec.
1117 (parse_accdest): Dest spec is optional.
1118 (print_accdest): Don't print dest spec.
1121 Tue Feb 17 17:14:50 1998 Doug Evans <devans@seba.cygnus.com>
1123 * Makefile.am (CGENFILES): Update.
1124 * Makefile.in: Regenerate.
1125 * cgen-asm.in (insert_normal): Result is error message now.
1126 Validate value to be inserted.
1127 (insert_insn_normal): Result is error message now.
1128 (@arch@_cgen_assemble_insn): Update.
1129 * cgen-asm.c (cgen_parse_{signed,unsigned}_integer): Delete min,max
1130 arguments. Don't perform validation here.
1131 * m32r-asm.c,m32r-dis.c,m32r-opc.c: Regenerate.
1133 Fri Feb 13 14:26:06 1998 Doug Evans <devans@canuck.cygnus.com>
1135 * cgen-opc.in (@arch@_cgen_get_insn_operands): Handle empty
1136 operand instance list.
1137 * m32r-opc.c: Regenerate.
1139 Fri Feb 13 14:53:02 1998 Ian Lance Taylor <ian@cygnus.com>
1141 * Makefile.am (AUTOMAKE_OPTIONS): Define.
1142 * configure, Makefile.in, aclocal.m4: Rebuild with automake 1.2e.
1144 Fri Feb 13 10:21:09 1998 Mark Alexander <marka@cygnus.com>
1146 * m10300-dis.c (print_insn_mn10300): Recognize break instruction.
1148 Fri Feb 13 13:12:14 1998 Ian Lance Taylor <ian@cygnus.com>
1150 * configure.in: Get the version number from BFD.
1151 * configure: Rebuild.
1153 From H.J. Lu <hjl@gnu.org>:
1154 * Makefile.am (libopcodes_la_LDFLAGS): Define.
1155 * Makefile.in: Rebuild.
1157 Fri Feb 13 09:50:32 1998 Nick Clifton <nickc@cygnus.com>
1159 * m32r-opc.c: Regenerate.
1160 * m32r-opc.h: Regenerate.
1162 Thu Feb 12 11:01:40 1998 Doug Evans <devans@canuck.cygnus.com>
1164 * cgen-opc.in (@arch@_cgen_lookup_insn): New argument alias_p.
1165 Ignore ALIAS insns if asked to.
1166 (@arch@_cgen_get_insn_operands): Pass 0 for alias_p, NULL for insn.
1167 * m32r-opc.c: Regenerate.
1170 * dvp.opc.c: Nicely format opcode tables.
1171 (vu_operands): New element UFLAGS.
1172 (parse_uflags,print_uflags): New functions.
1173 (vu_upper_opcodes): Add UFLAGS to all insns.
1176 Thu Feb 12 03:41:00 1998 J"orn Rennecke <amylaar@cygnus.co.uk>
1178 Fix rac to accept only a0:
1179 * d10v-opc.c (d10v_predefined_registers, d10v_operands, d10v_opcodes):
1180 Split OPERAND_ACC into OPERAND_ACC0 and OPERAND_ACC1.
1181 Introduce OPERAND_GPR.
1182 * d10v-dis.c (print_operand): Likewise.
1184 Wed Feb 11 18:58:34 1998 Doug Evans <devans@seba.cygnus.com>
1186 * cgen-opc.in: New file.
1187 * cgen.sh: Translate @ARCH@. Cat cgen-opc.in into @arch@-opc.c.
1188 * Makefile.am (CGENFILES): Add cgen-opc.in.
1189 * Makefile.in: Regenerate.
1191 * cgen-opc.c (cgen_set_cpu): Delete init of hw list `next' chain.
1192 (cgen_hw_lookup): Make result const.
1194 * cgen-dis.in (*): Use PTR instead of void *.
1195 (print_insn): Delete unused vars `i', `syntax'.
1197 * m32r-opc.h, m32r-opc.c, m32r-asm.c, m32r-dis.c: Regenerate.
1200 Tue Feb 10 14:56:24 1998 Doug Evans <devans@canuck.cygnus.com>
1202 * dvp-opc.c (*): pke,gpuif renamed to vif,gif.
1203 (vif_opcodes): Update renamed insns.
1204 * dvp-dis.c (*): Likewise.
1207 Sat Feb 7 15:30:27 1998 Ian Lance Taylor <ian@cygnus.com>
1209 * configure, aclocal.m4: Rebuild with new libtool.
1212 Thu Feb 5 17:56:10 1998 Michael Meissner <meissner@cygnus.com>
1214 * d30v-opc.c (repeat{,i} instructions): Repeat/repeati
1215 instructions use a PC relative branch, not absolute.
1218 Wed Feb 4 19:17:37 1998 Ian Lance Taylor <ian@cygnus.com>
1220 * configure.in: Set libtool_enable_shared rather than
1221 libtool_shared. Remove diversion hack.
1222 * configure, Makefile.in, aclocal.m4: Rebuild with new libtool.
1224 Tue Feb 3 17:19:40 1998 Doug Evans <devans@seba.cygnus.com>
1226 * cgen-opc.c (cgen_set_cpu): Initialize hardware table.
1227 * m32r-opc.h, m32r-opc.c, m32r-asm.c, m32r-dis.c: Regenerate.
1229 Mon Feb 2 19:22:15 1998 Steve Haworth <steve@pm.cse.rmit.EDU.AU>
1231 * tic30-dis.c: New file.
1232 * disassemble.c (disassembler): Add bfd_arch_tic30 case.
1233 * configure.in: Handle bfd_tic30_arch.
1234 * Makefile.am: Rebuild dependencies.
1235 (CFILES): Add tic30-dis.c
1236 (ALL_MACHINES): Add tic30-dis.lo.
1237 * configure, Makefile.in: Rebuild.
1239 start-sanitize-m32rx
1240 Mon Feb 2 11:04:08 1998 Nick Clifton <nickc@cygnus.com>
1242 * m32r-opc.c, m32r-opc.h, m32r-asm.c m32r-dis.c: Newly generated
1243 versions after updates to m32r.cpu to remove mulwhi-a, mulwlo-a,
1244 macwhi-a and macwlo-a instructions.
1248 Fri Jan 30 17:39:21 1998 Ian Carmichael <iancarm@cygnus.com>
1250 * dvp-opc.c, fixed encoding of a bunch of instructions to
1251 be consistent with the asmvu assembler (and inconsistent
1252 with the specification).
1254 Thu Jan 29 18:14:56 1998 Ian Carmichael <iancarm@cygnus.com>
1256 * dvp-opc.c, fixed order of pkemscal/pkemscalf instructions
1257 in the opcode table. The pkemscalf instruction must come first.
1259 Thu Jan 29 16:47:24 1998 Ian Carmichael <iancarm@cygnus.com>
1261 * dvp-opc.c, MAXIi should be VUOP6(0x1d) instead of 0x2d.
1264 Thu Jan 29 13:02:56 1998 Doug Evans <devans@canuck.cygnus.com>
1266 * m32r-opc.h (HAVE_CPU_M32R): Define.
1269 Wed Jan 28 13:46:19 1998 Doug Evans <devans@canuck.cygnus.com>
1271 * dvp-dis.c, dvp-opc.c: New files.
1272 * configure.in: Compile them if bfd_dvp_arch, as well as mips.
1273 * configure: Regenerate.
1274 * Makefile.am (ALL_MACHINES): Add dvp-{dis,opc}.lo.
1275 (dvp-dis.lo,dvp-opc.lo): Add rules for.
1276 (mips-dis.lo): Compile with @archdefs@.
1277 * Makefile.in: Regenerate.
1278 * disassemble.c: Define ARCH_mips ifdef ARCH_dvp.
1279 * mips-dis.c (print_insn_little_mips): Check for DVP insns.
1282 Wed Jan 28 09:55:03 1998 Nick Clifton <nickc@cygnus.com>
1284 * v850-opc.c (insertion routines): If both alignment and size is
1285 wrong then report this.
1287 Tue Jan 27 21:52:59 1998 Jeffrey A Law (law@cygnus.com)
1289 * mips-dis.c (_print_insn_mips): Set target_processor as appropriate.
1290 Only recognize instructions for the current target_processor.
1292 Thu Jan 22 16:20:17 1998 Fred Fish <fnf@cygnus.com>
1294 * d10v-dis.c (PC_MASK): Correct value.
1295 (print_operand): If there's a reloc, don't calculate the
1296 address because they could be in different sections.
1298 start-sanitize-cygnus
1299 Thu Jan 22 16:10:32 1998 Doug Evans <devans@seba.cygnus.com>
1301 * cgen.sh: Rewrite to be like simulator's version.
1302 * Makefile.am (cgen): Update call to cgen.sh.
1303 * Makefile.in: Regenerate
1306 Fri Jan 16 15:29:11 1998 Jim Blandy <jimb@zwingli.cygnus.com>
1308 * mips-opc.c (mips_builtin_opcodes): Move 4010's "addciu"
1309 instruction after the 4650's "mul" instruction; nobody's using the
1310 4010 these days. If object files someday indicate which processor
1311 variant they're intended for, we can do a better job at this.
1313 start-sanitize-r5900
1314 Tue Jan 13 09:21:56 1998 Jeffrey A Law (law@cygnus.com)
1316 * mips-opc.c (c.lt.s): Add r5900 variant.
1320 Mon Jan 12 14:43:54 1998 Doug Evans <devans@seba.cygnus.com>
1322 * cgen-asm.c (build_asm_hash_table): Traverse compiled in table using
1323 table provided entry size. Use CGEN_INSN_MNEMONIC.
1324 (cgen_parse_keyword): Rewrite.
1325 * cgen-dis.c (build_dis_hash_table): Traverse compiled in table using
1326 table provided entry size. Use CGEN_INSN_MASK_BITSIZE.
1327 * cgen-opc.c: Clean up pass over `struct foo' usage.
1328 (cgen_keyword_lookup_value): Handle "" entry.
1329 (cgen_keyword_add): Likewise.
1330 start-sanitize-cygnus
1331 * Makefile.am: Add cgen support.
1332 * Makefile.in: Regenerate.
1333 * configure.in: Add cgen support.
1334 * configure: Regenerate.
1335 * aclocal.m4: Regenerate.
1336 * cgen.sh, cgen-asm.in, cgen-dis.in: New files.
1339 Mon Dec 22 12:37:06 1997 Ian Lance Taylor <ian@cygnus.com>
1341 * mips-opc.c: Add FP_D to s.d instruction flags.
1343 Wed Dec 17 11:38:29 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1345 * m68k-opc.c (halt, pulse): Enable them on the 68060.
1347 start-sanitize-tic80
1348 Tue Dec 16 15:22:53 1997 Fred Fish <fnf@cygnus.com>
1350 * tic80-opc.c (tic80_opcodes): Revert change that put the 32 bit
1351 PC relative offset forms before the 15 bit forms. An assembler command
1352 line option now chooses the default.
1355 start-sanitize-r5900
1356 Tue Dec 16 13:24:22 1997 Jeffrey A Law (law@cygnus.com)
1358 * mips-opc.c: Add many missing r5900 instructions.
1362 Tue Dec 16 15:22:51 1997 Michael Meissner <meissner@cygnus.com>
1364 * d30v-opc.c (d30v_opcode_table): Set new flags bits
1365 FLAG_{2WORD,MUL{16,32},ADDSUBppp}, in appropriate instructions.
1368 1997-12-15 Brendan Kehoe <brendan@lisa.cygnus.com>
1370 * configure: Only build libopcodes shared if --enable-shared's value
1371 was `yes', or was set to `*opcodes*'.
1372 * aclocal.m4: Likewise.
1373 * NOTE: this really needs to be fixed in libtool/libtool.m4, the
1374 original source of this bit of code. It's not clear what the best fix
1377 start-sanitize-r5900
1378 Mon Dec 15 12:43:36 1997 Jeffrey A Law (law@cygnus.com)
1380 * mips-opc.c (mtpc, mfpc, mtps, mfps): Add r5900 variants.
1382 start-sanitize-tic80
1383 Fri Dec 12 11:57:04 1997 Fred Fish <fnf@cygnus.com>
1385 * tic80-opc.c (OFF_SL_PC, OFF_SL_BR): Minor formatting change.
1386 (tic80_opcodes): Reorder table entries to put the 32 bit PC relative
1387 offset forms before the 15 bit forms, to default to the long forms.
1390 Fri Dec 12 01:32:30 1997 Richard Henderson <rth@cygnus.com>
1392 * alpha-opc.c (cvttq/*u*): Remove, as that suffix is invalid.
1394 Wed Dec 10 17:42:35 1997 Nick Clifton <nickc@cygnus.com>
1396 * arm-dis.c (print_insn_little_arm): Prevent examination of stored
1397 symbol if none is present.
1398 (print_insn_big_arm): Prevent examination of stored symbol if
1401 Thu Oct 23 21:13:37 1997 Fred Fish <fnf@cygnus.com>
1403 * d10v-opc.c (d10v_opcodes): Correct entry for RTE.
1405 Mon Dec 8 11:21:07 1997 Nick Clifton <nickc@cygnus.com>
1407 * disassemble.c: Remove disasm_symaddr() function.
1409 * arm-dis.c: Use info->symbol instead of info->flags to determine
1410 if disassmbly should be in Thumb or Arm mode.
1412 Tue Dec 2 09:54:27 1997 Nick Clifton <nickc@cygnus.com>
1414 * arm-dis.c: Add support for disassembling Thumb opcodes.
1415 (print_insn_thumb): New function.
1417 * disassemble.c (disasm_symaddr): New function.
1419 * arm-opc.h: Display nop pseudo ops alongside equivalent disassembly.
1420 (thumb_opcodes): Table of Thumb opcodes.
1422 Mon Dec 1 12:25:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1424 * m68k-opc.c (btst): Change Dd@s to Dd;b.
1426 * m68k-dis.c (print_insn_arg): Recognize 'm', 'n', 'o', 'p', 'q',
1427 and 'v' as operand types.
1429 Mon Dec 1 11:56:50 1997 Ian Lance Taylor <ian@cygnus.com>
1431 * m68k-opc.c: Add argument for lpstop. From Olivier Carmona
1432 <olivier.carmona@di.epfl.ch>.
1433 * m68k-dis.c (print_insn_m68k): Handle special case of lpstop,
1434 which has a two word opcode with a one word argument.
1437 Sun Nov 23 22:25:21 1997 Michael Meissner <meissner@cygnus.com>
1439 * d30v-opc.c (d30v_opcode_table, case cmpu): Immediate field is
1440 unsigned, not signed.
1441 (d30v_format_table): Add SHORT_CMPU cases for cmpu.
1444 Wed Nov 19 17:42:35 1997 Richard Henderson <rth@cygnus.com>
1446 * sh-dis.c (print_insn_shx): Recognize all sh4 additions.
1447 * sh-opc.h (fmov): Add @<REG_M>+,<DX_REG_N> variant for sh4.
1448 (ftrv): Slay the cut-and-paste monster.
1450 Tue Nov 18 23:10:03 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1452 * d10v-dis.c (print_operand):
1453 Split OPERAND_FLAG into OPERAND_FFLAG and OPERAND_CFLAG.
1455 Tue Nov 18 18:45:14 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1457 * d10v-opc.c (OPERAND_FLAG): Split into:
1458 (OPERAND_FFLAG, OPERAND_CFLAG) .
1462 Thu Nov 13 11:05:33 1997 Gavin Koch <gavin@cygnus.com>
1464 * mips-opc.c: Move the INSN_MACRO ISA value to the membership
1465 field for all INSN_MACRO's.
1466 * mips16-opc.c: same
1468 Wed Nov 12 10:16:57 1997 Gavin Koch <gavin@cygnus.com>
1470 * mips-opc.c (sync,cache): These are 3900 insns.
1472 Tue Nov 11 23:53:41 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1474 sh-opc.h (sh_table): Remove ftst/nan.
1476 start-sanitize-vr5400
1477 Mon Nov 3 13:23:15 1997 Ken Raeburn <raeburn@cygnus.com>
1479 * mips-opc.c (dror32, dror, rzu.ob): Fix bugs in encoding.
1480 (c.*.ob, mula.ob, mull.ob, muls.ob, mulsl.ob): Put 'k' version
1482 * mips-dis.c (print_insn_arg): Handle VR5400 operand types.
1486 Wed Oct 29 15:10:56 1997 Gavin Koch <gavin@cygnus.com>
1488 * mips-opc.c (deret,dmult,dmultu,madd,maddu,pref,sdbbp):
1489 Add tx49 insns and configury.
1492 Tue Oct 28 17:59:32 1997 Ken Raeburn <raeburn@cygnus.com>
1494 * mips-opc.c (ffc, ffs): Fix mask.
1497 Tue Oct 28 16:34:54 1997 Michael Meissner <meissner@cygnus.com>
1499 * d30v-opc.c (pre_defined_registers): Add eit_vb, int_s, and int_m
1503 Mon Oct 27 22:34:03 1997 Ken Raeburn <raeburn@cygnus.com>
1505 * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
1506 start-sanitize-vr5400
1507 Added VR5400 instructions.
1508 (N5): New cpu-id macro.
1510 (WR_HILO, RD_HILO, MOD_HILO): New macros.
1512 Mon Oct 27 22:34:03 1997 Ken Raeburn <raeburn@cygnus.com>
1514 * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
1515 (WR_HILO, RD_HILO, MOD_HILO): New macros.
1517 Thu Oct 23 14:57:58 1997 Nick Clifton <nickc@cygnus.com>
1519 * v850-dis.c (disassemble): Replace // with /* ... */
1521 Wed Oct 22 17:33:21 1997 Richard Henderson <rth@cygnus.com>
1523 * sparc-opc.c: Add wr & rd for v9a asr's.
1524 * sparc-dis.c (print_insn_sparc): Recognize '_' and '/' for v9a asr's.
1525 (v9a_asr_reg_names): New variable.
1526 Patch from David Miller <davem@vger.rutgers.edu>.
1528 Wed Oct 22 17:18:02 1997 Richard Henderson <rth@cygnus.com>
1530 * sparc-opc.c (v9notv9a): New insn type.
1531 (IMPDEP): Move to the end to not conflict with edge8 et al.
1532 Patch from David Miller <davem@vger.rutgers.edu>.
1534 Fri Oct 17 13:18:53 1997 Gavin Koch <gavin@cygnus.com>
1536 * mips-opc.c (bnezl,beqzl): Mark these as also tx39.
1538 Thu Oct 16 11:55:20 1997 Gavin Koch <gavin@cygnus.com>
1540 * mips-opc.c: Note that 'jalx' is (probably incorrectly) marked I1.
1542 Tue Oct 14 16:10:31 1997 Nick Clifton <nickc@cygnus.com>
1544 * v850-dis.c (disassemble): Use new symbol_at_address_func() field
1545 of disassemble_info structure to determine if an overlay address
1546 has a matching symbol in low memory.
1548 * dis-buf.c (generic_symbol_at_address): New (dummy) function for
1549 new symbol_at_address_func field in disassemble_info structure.
1551 Fri Oct 10 16:44:52 1997 Nick Clifton <nickc@cygnus.com>
1553 * v850-opc.c (extract_d22): Use signed arithmatic.
1555 Tue Oct 7 23:40:43 1997 Gavin Koch <gavin@cygnus.com>
1557 * mips-opc.c: Three op mult is not an ISA insn.
1559 Tue Oct 7 23:37:21 1997 Gavin Koch <gavin@cygnus.com>
1561 * mips-opc.c: Fix formatting.
1563 Fri Oct 3 17:26:54 1997 Ian Lance Taylor <ian@cygnus.com>
1565 * i386-dis.c (OP_E): Explicitly sign extend 8 bit values, rather
1566 than assuming that char is signed. Explicitly sign extend 16 bit
1567 values, rather than assuming that short is 16 bits.
1568 (OP_sI, OP_J, OP_DIR): Likewise.
1570 start-sanitize-v850e
1571 Thu Oct 2 13:36:45 1997 Nick Clifton <nickc@cygnus.com>
1573 * v850-dis.c (v850_sreg_names): Use symbolic names for higher
1577 Wed Oct 1 16:58:54 1997 Nick Clifton <nickc@cygnus.com>
1579 * v850-opc.c: Fix typo in comment.
1581 * v850-dis.c (disassemble): Add test of processor type when
1582 determining opcodes.
1584 Wed Oct 1 14:10:20 1997 Ian Lance Taylor <ian@cygnus.com>
1586 * configure.in: Use a diversion to set enable_shared before the
1587 arguments are parsed.
1588 * configure: Rebuild.
1590 Thu Sep 25 13:04:59 1997 Ian Lance Taylor <ian@cygnus.com>
1592 * m68k-opc.c (TBL1): Use ! rather than `.
1593 * m68k-dis.c (print_insn_arg): Remove ` operand specifier.
1595 Wed Sep 24 11:29:35 1997 Ian Lance Taylor <ian@cygnus.com>
1597 * m68k-opc.c: Correct bchg, bclr, bset, and btst on ColdFire.
1599 * m68k-opc.c: Accept tst{b,w,l} with immediate operands on cpu32.
1601 * m68k-opc.c: Correct movew of an immediate operand to %sr or %ccr
1604 * configure.in: Call AC_CHECK_TOOL before AM_PROG_LIBTOOL.
1605 * aclocal.m4: Rebuild with new libtool.
1606 * configure: Rebuild.
1608 start-sanitize-v850e
1609 Fri Sep 19 11:45:49 1997 Andrew Cagney <cagney@b1.cygnus.com>
1611 * v850-opc.c ("cmov"): Order reg param r1, r2 not r2, r2.
1614 Thu Sep 18 11:21:43 1997 Doug Evans <dje@canuck.cygnus.com>
1616 * sparc-opc.c (sparclet_cpreg_table): Add %ccsr2, %cccrr, %ccrstr.
1618 Tue Sep 16 15:18:20 1997 Nick Clifton <nickc@cygnus.com>
1620 * v850-opc.c (v850_opcodes): Further rearrangements.
1623 Tue Sep 16 16:12:11 1997 Ken Raeburn <raeburn@cygnus.com>
1625 * d30v-opc.c (rot2h, sra2h, srl2h insns): Revert last change.
1628 Tue Sep 16 09:48:50 1997 Nick Clifton <nickc@cygnus.com>
1630 * v850-opc.c (v850_opcodes): Fields reordered to allow assembler
1633 Tue Sep 16 10:01:00 1997 Gavin Koch <gavin@cygnus.com>
1635 * mips-opc.c: Added tx39 insns sdbbp, rfe, and deret.
1637 * mips16-opc.c: Added mips16 sdbbp.
1640 Mon Sep 15 18:31:52 1997 Nick Clifton <nickc@cygnus.com>
1642 * v850-opc.c: Initialise processors field of v850_opcode structure.
1645 Wed Aug 27 21:42:39 1997 Ken Raeburn <raeburn@cygnus.com>
1647 Merge changes from Martin Hunt:
1649 * d30v-opc.c: Change mvfacc to accept 6-bit unsigned values.
1651 * d30v-opc.c (pre_defined_registers): Add control registers from 0-63.
1652 (d30v_opcode_tabel): Add dbt, rtd, srah, and srlh instructions. Fix
1653 rot2h, sra2h, and srl2h to use new SHORT_A5S format.
1655 * d30v-dis.c (print_insn): Fix disassembly of SHORT_D2 opcodes.
1657 * d30v-dis.c (print_insn): First operand of d*i (delayed
1658 branch) instructions is relative.
1660 * d30v-opc.c (d30v_opcode_table): Change form for repeati.
1661 (d30v_operand_table): Add IMM6S3 type.
1662 (d30v_format_table): Change SHORT_D2. Add LONG_Db.
1664 * d30v-dis.c: Fix bug with ".s" and ".l" extensions
1665 and cmp instructions.
1667 * d30v-opc.c: Correct entries for repeat*, and sat*.
1668 Make IMM5 unsigned. Create IMM6U and IMM12S3U operand
1669 types. Correct several formats.
1671 * d30v-opc.c: (pre_defined_registers): Add dpsw and dpc.
1673 * d30v-opc.c (pre_defined_registers): Change control registers.
1675 * d30v-opc.c (d30v_format_table): Correct SHORT_C1 and
1676 SHORT_C2. Manual was incorrect.
1678 * d30v-dis.c (lookup_opcode): Return value now indicates
1679 if an opcode has a short and a long form. Used for deciding
1680 to append a ".s" or ".l".
1681 (print_insn): Append a ".s" to an instruction if it is
1682 the short form and ".l" if it is a long form. Do not append
1683 anything if the instruction has only one possible size.
1685 * d30v-opc.c: Change mulx2h to require an even register.
1686 New form: SHORT_A2; a SHORT_A form that needs an even
1687 register as the first operand.
1689 * d30v-dis.c (print_insn_d30v): Fix problem where the last
1690 instruction was not being disassembled if there were an odd
1691 number of instructions.
1693 * d30v-opc.c (SHORT_M2, LONG_M2): Two new forms.
1696 start-sanitize-v850e
1697 Fri Sep 12 11:43:54 1997 Nick Clifton <nickc@cygnus.com>
1699 * v850-dis.c (disassemble): Improved display of register lists.
1702 Thu Sep 11 17:35:10 1997 Doug Evans <dje@canuck.cygnus.com>
1704 * sparc-opc.c (sparc_opcodes): Fix assembler args to
1705 fzeros, fones, fsrc1, fsrc1s, fsrc2s, fnot1, fnot1s, fnot2s,
1706 fors, fnors, fands, fnands, fxors, fxnors, fornot1s, fornot2s,
1707 fandnot1s, fandnot2s.
1709 Tue Sep 9 10:03:49 1997 Doug Evans <dje@canuck.cygnus.com>
1711 * sparc-opc.c (sparc_opcodes): Fix op3 field for fcmpq/fcmpeq.
1713 Mon Sep 8 14:06:59 1997 Doug Evans <dje@canuck.cygnus.com>
1715 * cgen-asm.c (cgen_parse_address): New argument resultp.
1716 All callers updated.
1717 * m32r-asm.c (parse_h_hi16): Right shift numbers by 16.
1719 Tue Sep 2 18:39:08 1997 Jeffrey A Law (law@cygnus.com)
1721 * mn10200-dis.c (disassemble): PC relative instructions are
1722 relative to the next instruction, not the current instruction.
1724 Tue Sep 2 15:41:55 1997 Nick Clifton <nickc@cygnus.com>
1726 * v850-dis.c (disassemble): Only signed extend values that are not
1727 returned by extract functions.
1728 Remove use of V850_OPERAND_ADJUST_SHORT_MEMORY flag.
1730 Tue Sep 2 15:39:40 1997 Nick Clifton <nickc@cygnus.com>
1732 * v850-opc.c: Update comments. Remove use of
1733 V850_OPERAND_ADJUST_SHORT_MEMORY. Fix several operand patterns.
1735 Tue Aug 26 09:42:28 1997 Nick Clifton <nickc@cygnus.com>
1737 * v850-opc.c (MOVHI): Immediate parameter is unsigned.
1739 Mon Aug 25 15:58:07 1997 Christopher Provenzano <proven@cygnus.com>
1741 * configure: Rebuilt with latest devo autoconf for NT support.
1743 Fri Aug 22 10:35:15 1997 Nick Clifton <nickc@cygnus.com>
1745 * v850-dis.c (disassemble): Use curly brace syntax for register
1748 * v850-opc.c (v850_opcodes[]): Add NOT_R0 flag to decect cases
1749 where r0 is being used as a destination register.
1751 start-sanitize-v850e
1752 Thu Aug 21 11:09:09 1997 Nick Clifton <nickc@cygnus.com>
1754 * v850-opc.c (v850_opcodes[]): Move divh opcodes next to each other.
1757 Wed Aug 20 00:43:11 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1759 * sh-opc.h (sh_arg_type): Add A_SGR and A_DBR.
1760 (sh_nibble_type, sh_arg_type): Add SH4 floating point extensions.
1761 (sh_table): Likewise. Add movca.l, ocbi, ocbp, ocbwb.
1762 Add insns to access SGR and DBR.
1763 * sh-dis.c (print_insn_shx): Add SH4 floating point extensions.
1765 Tue Aug 19 10:59:59 1997 Richard Henderson <rth@cygnus.com>
1767 * alpha-opc.c (alpha_opcodes): Fix hw_rei_stall mungage.
1769 start-sanitize-v850e
1770 Mon Aug 18 11:10:03 1997 Nick Clifton <nickc@cygnus.com>
1772 * v850-opc.c (v850_opcodes[]): Remove use of flag field.
1773 * v850-opc.c (v850_opcodes[]): Add support for reversed short load
1776 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
1778 * configure (cgen_files): Add support for v850e target.
1779 * configure.in (cgen_files): Add support for v850e target.
1781 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
1783 * configure (cgen_files): Add support for v850ea target.
1784 * configure.in (cgen_files): Add support for v850ea target.
1787 Fri Aug 15 05:17:48 1997 Doug Evans <dje@canuck.cygnus.com>
1789 * configure.in (bfd_arc_arch): Add.
1790 * configure: Rebuild.
1791 * Makefile.am (ALL_MACHINES): Add arc-dis.lo, arc-opc.lo.
1792 * Makefile.in: Rebuild.
1793 * arc-dis.c, arc-opc.c: New files.
1794 * disassemble.c (ARCH_all): Define ARCH_arc.
1795 (disassembler): Add ARC support.
1797 Wed Aug 13 18:52:11 1997 Nick Clifton <nickc@cygnus.com>
1799 start-sanitize-v850e
1800 * v850-dis.c (disassemble): Add support for v850EA instructions.
1802 * v850-opc.c (insert_i5div, extract_i5div): New Functions.
1803 (v850_opcodes): Add v850EA instructions.
1805 * v850-dis.c (disassemble): Add support for v850E instructions.
1807 * v850-opc.c (insert_d5_4, extract_d5_4, insert_d16_16,
1808 extract_d16_16, insert_i9, extract_i9, insert_u9, extract_u9,
1809 insert_spe, extract_spe): New Functions.
1810 (v850_opcodes): Add v850E instructions.
1813 * v850-opc.c: Reorganised and re-layed out to improve readability
1816 Tue Aug 5 23:09:31 1997 Ian Lance Taylor <ian@cygnus.com>
1818 * configure: Rebuild with autoconf 2.12.1.
1820 Mon Aug 4 12:02:16 1997 Ian Lance Taylor <ian@cygnus.com>
1822 * aclocal.m4, configure: Rebuild with new automake patches.
1824 Fri Aug 1 13:02:04 1997 Ian Lance Taylor <ian@cygnus.com>
1826 * configure.in: Set enable_shared before AM_PROG_LIBTOOL.
1827 * acinclude.m4: Just include acinclude.m4 from BFD.
1828 * aclocal.m4, configure: Rebuild.
1830 Thu Jul 31 21:44:42 1997 Ian Lance Taylor <ian@cygnus.com>
1832 * Makefile.am: New file, based on old Makefile.in.
1833 * acconfig.h: New file.
1834 * acinclude.m4: New file.
1835 * stamp-h.in: New file.
1836 * configure.in: Call AM_INIT_AUTOMAKE and AM_PROG_LIBTOOL.
1837 Removed shared library handling; now handled by libtool. Replace
1838 AC_CONFIG_HEADER with AM_CONFIG_HEADER. Call AM_MAINTAINER_MODE,
1839 AM_CYGWIN32, and AM_EXEEXT. Replace AC_PROG_INSTALL with
1840 AM_PROG_INSTALL. Change all .o files to .lo. Remove stamp-h
1841 handling in AC_OUTPUT.
1842 * dep-in.sed: Change .o to .lo.
1843 * Makefile.in: Now built with automake.
1844 * aclocal.m4: Now built with aclocal.
1845 * config.in, configure: Rebuild.
1847 Mon Jul 28 21:52:24 1997 Jeffrey A Law (law@cygnus.com)
1849 * mips-opc.c: Fix typo/thinko in "eret" instruction.
1851 start-sanitize-r5900
1852 Mon Jul 28 22:07:14 1997 Andrew Cagney <cagney@b1.cygnus.com>
1854 * mips-opc.c: Fix coding of mtsa.
1857 Thu Jul 24 13:03:26 1997 Doug Evans <dje@canuck.cygnus.com>
1859 * sparc-opc.c (sparc_opcodes): Fix spelling on fpaddX, fpsubX insns.
1861 * sparc-dis.c (sorted_opcodes): New static local.
1862 (struct opcode_hash): `opcode' is pointer to const element.
1863 (build_hash): First arg is now table of sorted pointers.
1864 (print_insn_sparc): Sort opcodes by sorting table of pointers.
1865 (compare_opcodes): Update.
1867 Tue Jul 15 12:05:23 1997 Doug Evans <dje@canuck.cygnus.com>
1869 * cgen-opc.c: #include <ctype.h>.
1870 (hash_keyword_name): New arg `case_sensitive_p'. Callers updated.
1871 Handle case insensitive hashing.
1872 (hash_keyword_value): Change type of `value' to unsigned int.
1874 Thu Jul 10 12:56:10 1997 Jeffrey A Law (law@cygnus.com)
1876 * mips-opc.c (mips_builtin_opcodes): If an insn uses single
1877 precision FP, mark it as such. Likewise for double precision
1878 FP. Mark ISA1 insns. Consolidate duplicate opcodes where
1880 start-sanitize-r5900
1881 (mips_builtin_opcodes): Remove non-existant r5900 instructions
1884 start-sanitize-r5900
1885 Thu Jun 26 16:20:27 1997 Jeffrey A Law (law@cygnus.com)
1887 * mips-opc.c (mips_builtin_opcodes): Add "pinteh", "pexeh" and
1888 "pexew" as synonyms for "pintoh", "pexoh", "pexow".
1891 Wed Jun 25 15:25:57 1997 Felix Lee <flee@cirdan.cygnus.com>
1893 * ppc-opc.c (extract_nsi): make unsigned expression signed before
1895 (UNUSED): remove one level of parens, so MSVC doesn't choke on
1896 nesting depth when all the macros are expanded.
1898 Tue Jun 17 17:02:17 1997 Ian Lance Taylor <ian@cygnus.com>
1900 * sparc-opc.c: The fcmp v9a instructions take an integer register
1901 as a destination, not a floating point register. From Christian
1902 Kuehnke <Christian.Kuehnke@arbi.Informatik.Uni-Oldenburg.DE>.
1904 Mon Jun 16 14:13:18 1997 Ian Lance Taylor <ian@cygnus.com>
1906 * m68k-dis.c (print_insn_arg): Print case 7.2 using %pc@()
1907 syntax. From Roman Hodek
1908 <rnhodek@faui22c.informatik.uni-erlangen.de>.
1910 * i386-dis.c (twobyte_has_modrm): Fix pand.
1912 Mon Jun 16 14:08:38 1997 Michael Taylor <mbt@mit.edu>
1914 * i386-dis.c (dis386_twobyte): Fix pand and pandn.
1916 Tue Jun 10 11:26:47 1997 H.J. Lu <hjl@gnu.ai.mit.edu>
1918 * arm-dis.c: Add prototypes for arm_decode_shift and
1921 Mon Jun 2 11:39:04 1997 Gavin Koch <gavin@cygnus.com>
1923 * mips-opc.c: Add r3900 insns.
1925 Tue May 27 15:55:44 1997 Ian Lance Taylor <ian@cygnus.com>
1927 * sh-dis.c (print_insn_shx): Change relmask to bfd_vma. Don't
1928 print delay slot instructions on the same line. When using a PC
1929 relative load, add a comment with the value being loaded if it can
1932 Tue May 27 11:02:08 1997 Alan Modra <alan@spri.levels.unisa.edu.au>
1934 * i386-dis.c (dis386[], dis386_twobyte[]): change pushl/popl
1935 to pushS/popS for segment regs and byte constant so that
1936 pushw/popw printed when in 16 bit data mode.
1938 * i386-dis.c (dis386[]): change cwtl, cltd to cWtS, cStd to
1939 print cbtw, cwtd in 16 bit data mode.
1940 * i386-dis.c (putop): extra case W to support above.
1942 * i386-dis.c (print_insn_x86): print addr32 prefix when given
1943 address size prefix in 16 bit address mode.
1945 Fri May 23 16:47:23 1997 Ian Lance Taylor <ian@cygnus.com>
1947 * sh-dis.c: Reindent. Rename local variable fprintf to
1950 Thu May 22 14:06:02 1997 Doug Evans <dje@canuck.cygnus.com>
1952 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Undo patch of May 2.
1954 Tue May 20 11:26:27 1997 Gavin Koch <gavin@cygnus.com>
1956 * mips-opc.c (mips_builtin_opcodes): Moved INSN_ISA field into new
1958 * mips16-opc.c (mip16_opcodes): same.
1960 Mon May 12 15:10:53 1997 Jim Wilson <wilson@cygnus.com>
1962 * m68k-opc.c (moveb): Change $d to %d.
1964 Mon May 5 14:28:41 1997 Ian Lance Taylor <ian@cygnus.com>
1966 * i386-dis.c: (dis386_twobyte): Add MMX instructions.
1967 (twobyte_has_modrm): Likewise.
1969 (OP_MMX, OP_EM, OP_MS): New static functions.
1971 * i386-dis.c: Revert patch of April 4. The output now matches
1974 Fri May 2 12:48:37 1997 Doug Evans <dje@canuck.cygnus.com>
1976 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Use $uimm16 instead
1979 Thu May 1 15:34:15 1997 Doug Evans <dje@canuck.cygnus.com>
1981 * m32r-opc.h (CGEN_ARCH): Renamed from CGEN_CPU.
1983 Tue Apr 15 12:40:08 1997 Ian Lance Taylor <ian@cygnus.com>
1985 * Makefile.in (install): Depend upon installdirs.
1986 (installdirs): New target.
1988 Mon Apr 14 12:13:51 1997 Ian Lance Taylor <ian@cygnus.com>
1990 From Thomas Graichen <graichen@rzpd.de>:
1991 * configure.in: Use ${CONFIG_SHELL} when running $ac_config_sub.
1992 * configure: Rebuild.
1994 Sun Apr 13 17:50:41 1997 Doug Evans <dje@canuck.cygnus.com>
1996 * cgen-*.c, m32r-*.c: #include sysdep.h instead of config.h.
1997 Delete string{,s}.h support.
1999 Thu Apr 10 14:44:56 1997 Doug Evans <dje@canuck.cygnus.com>
2001 * cgen-asm.c (cgen_parse_operand_fn): New global.
2002 (cgen_parse_{{,un}signed_integer,address}): Update call to
2003 cgen_parse_operand_fn.
2004 (cgen_init_parse_operand): New function.
2005 * m32r-asm.c (parse_insn_normal): cgen_init_parse_operand renamed
2006 from cgen_asm_init_parse.
2007 (m32r_cgen_assemble_insn): New operand `errmsg'.
2008 Delete call to as_bad, return error message to caller.
2009 (m32r_cgen_asm_hash_keywords): #if 0 out.
2011 Wed Apr 9 12:05:25 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2013 * m68k-dis.c (print_insn_arg) [case 'd']: Print as address register,
2015 [case 'J']: Fix typo in register name.
2017 Mon Apr 7 16:48:22 1997 Ian Lance Taylor <ian@cygnus.com>
2019 * configure.in: Substitute SHLIB_LIBS.
2020 * configure: Rebuild.
2021 * Makefile.in (SHLIB_LIBS): New variable.
2022 ($(SHLIB)): Use $(SHLIB_LIBS).
2024 Mon Apr 7 11:45:44 1997 Doug Evans <dje@canuck.cygnus.com>
2026 * cgen-dis.c (build_dis_hash_table): Fix xmalloc size computation.
2028 * cgen-opc.c (hash_keyword_name): Improve algorithm.
2030 * disassemble.c (disassembler): Handle m32r.
2032 Fri Apr 4 12:29:38 1997 Doug Evans <dje@canuck.cygnus.com>
2034 * m32r-asm.c, m32r-dis.c, m32r-opc.c, m32r-opc.h: New files.
2035 * cgen-asm.c, cgen-dis.c, cgen-opc.c: New files.
2036 * Makefile.in (CFILES): Add them.
2037 (ALL_MACHINES): Add them.
2038 (dependencies): Regenerate.
2039 * configure.in (cgen_files): New variable.
2040 (bfd_m32r_arch): Add entry.
2041 * configure: Regenerate.
2043 Fri Apr 4 14:04:16 1997 Ian Lance Taylor <ian@cygnus.com>
2045 * configure.in: Correct file names for bfd_mn10[23]00_arch.
2046 * configure: Rebuild.
2048 * Makefile.in: Rebuild dependencies.
2050 * d10v-dis.c: Include "ansidecl.h" before "opcode/d10v.h".
2052 * i386-dis.c (float_reg): Swap fsubrp and fsubp. Swap fdivrp and
2055 Thu Apr 3 13:22:45 1997 Ian Lance Taylor <ian@cygnus.com>
2057 * Branched binutils 2.8.
2059 Wed Apr 2 12:23:53 1997 Ian Lance Taylor <ian@cygnus.com>
2061 * m10200-dis.c: Rename from mn10200-dis.c.
2062 * m10200-opc.c: Rename from mn10200-opc.c.
2063 * m10300-dis.c: Rename from mn10300-dis.c
2064 * m10300-opc.c: Rename from mn10300-opc.c.
2065 * Makefile.in: Update accordingly.
2067 * mips16-opc.c: Add mul and dmul macros.
2069 Tue Apr 1 16:27:45 1997 Klaus Kaempf <kkaempf@progis.de>
2071 * makefile.vms: Update CFLAGS, add clean target.
2073 Fri Mar 28 12:10:09 1997 Ian Lance Taylor <ian@cygnus.com>
2075 * mips-opc.c: Add "wait". From Ralf Baechle
2076 <ralf@gnu.ai.mit.edu>.
2078 * configure.in: Add stdlib.h to AC_CHECK_HEADERS list.
2079 * configure, config.in: Rebuild.
2080 * sysdep.h: Include <stdlib.h> if it exists.
2081 * sparc-dis.c: Include <stdio.h> and "sysdep.h". Don't include
2083 * Makefile.in: Rebuild dependencies.
2085 Thu Mar 27 14:24:43 1997 Ian Lance Taylor <ian@cygnus.com>
2087 * ppc-opc.c: Add PPC 403 instructions and extended opcodes. From
2088 Andrew Bray <andy@madhouse.demon.co.uk>.
2090 * mips-opc.c: Add cast when setting mips_opcodes.
2092 Tue Mar 25 23:04:00 1997 Stu Grossman (grossman@critters.cygnus.com)
2094 * v850-dis.c (disassemble): Fix sign extension problem.
2095 * v850-opc.c (extract_d*): Fix sign extension problems to make
2096 disassembly calculate branch offsets correctly.
2098 Mon Mar 24 13:22:13 1997 Ian Lance Taylor <ian@cygnus.com>
2100 * sh-opc.h: Add bf/s and bt/s as synonyms for bf.s and bt.s.
2102 * mips-opc.c: Add dctr and dctw.
2105 Sun Mar 23 18:08:10 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2107 * d30v-dis.c (print_insn): Change the way signed constants
2110 Fri Mar 21 14:37:52 1997 Ian Lance Taylor <ian@cygnus.com>
2112 * Makefile.in (BFD_H): New variable.
2113 (HFILES): New variable.
2114 (CFILES): Add all C files.
2115 (.dep, .dep1, dep.sed, dep, dep-in): New targets.
2116 Delete old dependencies, and build new ones.
2117 * dep-in.sed: New file.
2119 Thu Mar 20 19:03:30 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
2121 * m68k-opc.c (m68k_opcode_aliases): Added blo and blo{s,b,w,l}.
2123 start-sanitize-coldfire
2124 Wed Mar 19 06:53:58 1997 J.T. Conklin <jtc@rtl.cygnus.com>
2126 * m68k-opc.c (m68k_opcodes): Provide coldfire division module
2129 end-sanitize-coldfire
2130 Tue Mar 18 14:17:03 1997 Jeffrey A Law (law@cygnus.com)
2132 * mn10200-opc.c: Change "trap" to "syscall".
2133 * mn10300-opc.c: Add new "syscall" instruction.
2135 Mon Mar 17 08:48:03 1997 J.T. Conklin <jtc@beauty.cygnus.com>
2137 * m68k-opc.c (m68k_opcodes): Provide correct entries for mulsl and
2138 mulul insns on the coldfire.
2140 Sat Mar 15 17:13:05 1997 Ian Lance Taylor <ian@cygnus.com>
2142 * arm-dis.c (print_insn_arm): Don't print instruction bytes.
2143 (print_insn_big_arm): Set bytes_per_chunk and display_endian.
2144 (print_insn_little_arm): Likewise.
2146 Fri Mar 14 15:08:59 1997 Ian Lance Taylor <ian@cygnus.com>
2148 Based on patches from H.J. Lu <hjl@lucon.org>:
2149 * i386-dis.c (fetch_data): Add prototype.
2150 * m68k-dis.c (fetch_data): Add prototype.
2151 (dummy_print_address): Add prototype. Make static.
2152 * ppc-opc.c (valid_bo): Add prototype.
2153 * sparc-dis.c (build_hash_table): Add prototype.
2154 (is_delayed_branch, compute_arch_mask): Add prototypes.
2155 (print_insn_sparc): Make several local variables const.
2156 (compare_opcodes): Change arguments to const PTR. Add prototype.
2157 * sparc-opc.c (arg): Change name field to be const.
2158 (lookup_name, lookup_value): Add prototypes. Change table and
2159 name parameters to be const.
2160 (sparc_encode_asi): Change name parameter to be const.
2161 (sparc_encode_membar, sparc_encode_prefetch): Likewise.
2162 (sparc_encode_sparclet_cpreg): Likewise.
2163 (sparc_decode_asi): Change return type to be const.
2164 (sparc_decode_membar, sparc_decode_prefetch): Likewise.
2165 (sparc_decode_sparclet_cpreg): Likewise.
2167 Fri Mar 7 10:51:49 1997 Ian Lance Taylor <ian@cygnus.com>
2169 * Makefile.in ($(SHLINK)): Just use ln -s, not ln -sf, since
2170 Solaris doesn't like the combined options, and the -f is
2172 (stamp-tshlink, install): Likewise.
2174 Thu Mar 6 16:51:11 1997 Jeffrey A Law (law@cygnus.com)
2176 * mn10300-opc.c (IMM16_PCREL, SD8N_PCREL, D16_SHIFT): Mark these
2179 Tue Mar 4 06:10:36 1997 J.T. Conklin <jtc@cygnus.com>
2181 * m68k-opc.c (m68k_opcodes): Fix last change for the mc68010.
2183 Mon Mar 3 07:45:20 1997 J.T. Conklin <jtc@cygnus.com>
2185 * m68k-opc.c (m68k_opcodes): Added entries for the tst insns on
2188 Thu Feb 27 14:04:32 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
2190 * m68k-opc.c (m68k_opcodes): Added swbegl pseudo-instruction.
2192 start-sanitize-tic80
2193 Thu Feb 27 11:36:41 1997 Michael Meissner <meissner@cygnus.com>
2195 * tic80-dis.c (print_insn_tic80): Set info->bytes_per_line to 8.
2197 Wed Feb 26 15:34:48 1997 Michael Meissner <meissner@cygnus.com>
2199 * tic80-opc.c (tic80_predefined_symbols): Define r25 properly.
2202 Wed Feb 26 13:38:30 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2204 * m68k-dis.c (NEXTSINGLE, NEXTDOUBLE, NEXTEXTEND): Use
2205 floatformat_to_double to make portable.
2206 (print_insn_arg): Use NEXTEXTEND macro when extracting extended
2209 Mon Feb 24 19:26:12 1997 Dawn Perchik <dawn@cygnus.com>
2211 * mips-opc.c: Initialize mips_opcodes to mips_builtin_opcodes,
2212 and bfd_mips_num_opcodes to bfd_mips_num_builtin_opcodes.
2214 Mon Feb 24 15:19:01 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2216 * d10v-dis.c, d10v-opc.c: Change pre_defined_registers to
2217 d10v_predefined_registers and reg_name_cnt to d10v_reg_name_cnt.
2219 start-sanitize-tic80
2220 Mon Feb 24 14:33:26 1997 Fred Fish <fnf@cygnus.com>
2222 * tic80-opc.c (LSI_SCALED): Renamed from this ...
2223 (OFF_SL_BR_SCALED): ... to this, and added the flag
2224 TIC80_OPERAND_BASEREL to the flags word.
2225 (tic80_opcodes): Replace all occurances of LSI_SCALED with
2229 Sat Feb 22 21:25:00 1997 Dawn Perchik <dawn@cygnus.com>
2231 * mips-opc.c: Add macros for cop0, cop1 cop2 and cop3.
2232 Change mips_opcodes from const array to a pointer,
2233 and change bfd_mips_num_opcodes from const int to int,
2234 so that we can increase the size of the mips opcodes table
2237 start-sanitize-tic80
2238 Sat Feb 22 21:03:47 1997 Fred Fish <fnf@cygnus.com>
2240 * tic80-opc.c (tic80_predefined_symbols): Revert change to
2241 store BITNUM values in the table in one's complement form
2242 to match behavior when assembler is given a raw numeric
2243 value for a BITNUM operand.
2244 * tic80-dis.c (print_operand_bitnum): Ditto.
2248 Fri Feb 21 16:31:18 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2250 * d30v-opc.c: Removed references to FLAG_X.
2253 Wed Feb 19 14:51:20 1997 Ian Lance Taylor <ian@cygnus.com>
2255 * Makefile.in: Add dependencies on ../bfd/bfd.h as required.
2258 Tue Feb 18 17:43:43 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2260 * Makefile.in: Added d30v object files.
2261 * configure: (bfd_d30v_arch) Rebuilt.
2262 * configure.in: (bfd_d30v_arch) Added new case.
2263 * d30v-dis.c: New file.
2264 * d30v-opc.c: New file.
2265 * disassemble.c (disassembler) Add entry for d30v.
2268 start-sanitize-tic80
2269 Tue Feb 18 16:32:08 1997 Fred Fish <fnf@cygnus.com>
2271 * tic80-opc.c (tic80_predefined_symbols): Add symbolic
2272 representations for the floating point BITNUM values.
2274 Fri Feb 14 12:14:05 1997 Fred Fish <fnf@cygnus.com>
2276 * tic80-opc.c (tic80_predefined_symbols): Store BITNUM values
2277 in the table in one's complement form, as they appear in the
2279 (tic80_symbol_to_value): Use macros to access predefined
2281 (tic80_value_to_symbol): Ditto.
2282 (tic80_next_predefined_symbol): New function.
2283 * tic80-dis.c (print_operand_bitnum): Remove code that did
2284 one's complement for BITNUM values.
2287 start-sanitize-r5900
2288 Fri Feb 14 13:56:51 1997 Gavin Koch <gavin@cygnus.com>
2290 * mips-opc.c: bug fix, can't mark insns INSN_5900 and INSN_ISA4
2293 Thu Feb 13 21:56:51 1997 Klaus Kaempf <kkaempf@progis.de>
2295 * makefile.vms: Remove 8 bit characters. Update to latest
2298 Thu Feb 13 20:41:22 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
2300 * m68k-opc.c (m68k_opcodes): Add swbeg pseudo-instruction.
2302 Thu Feb 13 16:30:02 1997 Jeffrey A Law (law@cygnus.com)
2304 * mn10200-opc.c (IMM16_PCREL): This is a signed operand.
2305 (IMM24_PCREL): Likewise.
2307 Thu Feb 13 13:28:43 1997 Ian Lance Taylor <ian@cygnus.com>
2309 * mips-dis.c (print_mips16_insn_arg): Use memaddr - 2 as the base
2310 address for an extended PC relative instruction that is not a
2313 Wed Feb 12 12:27:40 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2315 * m68k-dis.c (print_insn_m68k): Set bytes_per_chunk and
2318 start-sanitize-tic80
2319 Tue Feb 11 16:36:31 1997 Fred Fish <fnf@cygnus.com>
2321 * tic80-opc.c (tic80_operands): Fix typo '+' -> '|'.
2322 (tic80_opcodes): Sort entries so that long immediate forms
2323 come after short immediate forms, making it easier for
2324 assembler to select the right one for a given operand.
2327 Tue Feb 11 15:26:47 1997 Ian Lance Taylor <ian@cygnus.com>
2329 * mips-dis.c (_print_insn_mips): Set bytes_per_chunk and
2331 (print_insn_mips16): Likewise.
2333 start-sanitize-r5900
2334 Fri Feb 7 11:12:44 1997 Gavin Koch <gavin@cygnus.com>
2336 * mips-opc.c: add r5900.
2339 start-sanitize-tic80
2340 Mon Feb 10 10:12:41 1997 Fred Fish <fnf@cygnus.com>
2342 * tic80-opc.c (tic80_symbol_to_value): Changed to accept
2343 a symbol class that restricts translation to just that
2344 class (general register, condition code, etc).
2346 Thu Feb 6 17:34:09 1997 Fred Fish <fnf@cygnus.com>
2348 * tic80-opc.c (tic80_operands): Add REG_0_E, REG_22_E,
2349 and REG_DEST_E for register operands that have to be
2350 an even numbered register. Add REG_FPA for operands that
2351 are one of the floating point accumulator registers.
2352 Add TIC80_OPERAND_MASK to flags for ENDMASK operand.
2353 (tic80_opcodes): Change entries that need even numbered
2354 register operands to use the new operand table entries.
2355 Add "or" entries that are identical to "or.tt" entries.
2358 Wed Feb 5 11:12:44 1997 Ian Lance Taylor <ian@cygnus.com>
2360 * mips16-opc.c: Add new cases of exit instruction for
2362 * mips-dis.c (print_mips16_insn_arg): Display floating point
2363 registers in operands of exit instruction. Print `$' before
2364 register names in operands of entry and exit instructions.
2366 start-sanitize-tic80
2367 Thu Jan 30 14:09:03 1997 Fred Fish <fnf@cygnus.com>
2369 * tic80-opc.c (tic80_predefined_symbols): Table of name/value
2370 pairs for all predefined symbols recognized by the assembler.
2371 Also used by the disassembling routines.
2372 (tic80_symbol_to_value): New function.
2373 (tic80_value_to_symbol): New function.
2374 * tic80-dis.c (print_operand_control_register,
2375 print_operand_condition_code, print_operand_bitnum):
2376 Remove private tables and use tic80_value_to_symbol function.
2379 Thu Jan 30 11:30:45 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2381 * d10v-dis.c (print_operand): Change address printing
2382 to correctly handle PC wrapping. Fixes PR11490.
2384 Wed Jan 29 09:39:17 1997 Jeffrey A Law (law@cygnus.com)
2386 * mn10200-opc.c (mn10200_operands): Make 8 and 16 bit pc-relative
2389 Tue Jan 28 15:57:34 1997 Ian Lance Taylor <ian@cygnus.com>
2391 * mips-dis.c (print_insn_mips16): Set insn_info information.
2392 (print_mips16_insn_arg): Likewise.
2394 * mips-dis.c (print_insn_mips16): Better handling of an extend
2395 opcode followed by an instruction which can not be extended.
2397 Fri Jan 24 12:08:21 1997 J.T. Conklin <jtc@cygnus.com>
2399 * m68k-opc.c (m68k_opcodes): Changed operand specifier for the
2400 coldfire moveb instruction to not allow an address register as
2401 destination. Although the documentation does not indicate that
2402 this is invalid, experiments uncovered unexpected behavior.
2403 Added a comment explaining the situation. Thanks to Andreas
2404 Schwab for pointing this out to me.
2406 start-sanitize-tic80
2407 Wed Jan 22 20:13:51 1997 Fred Fish <fnf@cygnus.com>
2409 * tic80-opc.c (tic80_opcodes): Expand comment to note that the
2410 entries are presorted so that entries with the same mnemonic are
2411 adjacent to each other in the table. Sort the entries for each
2412 instruction so that this is true.
2415 Mon Jan 20 12:48:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2417 * m68k-dis.c: Include <libiberty.h>.
2418 (print_insn_m68k): Sort the opcode table on the most significant
2419 nibble of the opcode.
2421 start-sanitize-tic80
2422 Sat Jan 18 15:15:05 1997 Fred Fish <fnf@cygnus.com>
2424 * tic80-dis.c (tic80_opcodes): Add "wrcr", "vmpy", "vrnd",
2425 "vsub", "vst", "xnor", and "xor" instructions.
2426 (V_a1): Renamed from V_a, msb of accumulator reg number.
2427 (V_a0): Add macro, lsb of accumulator reg number.
2429 Fri Jan 17 18:24:31 1997 Fred Fish <fnf@cygnus.com>
2431 * tic80-dis.c (print_insn_tic80): Broke excessively long
2432 function up into several smaller ones and arranged for
2433 the instruction printing function to be callable recursively
2434 to print vector instructions that have both a load and a
2435 math instruction packed into a single opcode.
2436 * tic80-opc.c (tic80_opcodes): Expand comment for vld opcode
2437 to explain why it comes after the other vector opcodes.
2440 Fri Jan 17 16:19:15 1997 J.T. Conklin <jtc@beauty.cygnus.com>
2442 * m68k-opc.c (m68k_opcodes): add b, w, or l specifier to coldfire
2443 move insns to handle immediate operands.
2445 Thu Jan 17 16:19:00 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2447 * m68k-opc.c (m68k_opcodes): Delete duplicate entry for "cmpil".
2448 fix operand mask in the "moveml" entries for the coldfire.
2450 start-sanitize-tic80
2451 Thu Jan 16 20:54:40 1997 Fred Fish <fnf@cygnus.com>
2453 * tic80-opc.c (V_a, V_m, V_S, V_Z, V_p, OP_V, MASK_V):
2454 New macros for building vector instruction opcodes.
2455 (tic80_opcodes): Remove all uses of FMT_SI, FMT_REG, and
2456 FMT_LI, which were unused. The field is now a flags field.
2457 Remove some opcodes that are possible, but illegal, such
2458 as long immediate instructions with doubles for immediate
2459 values. Add "vadd" and "vld" instructions.
2461 Wed Jan 15 18:59:51 1997 Fred Fish <fnf@cygnus.com>
2463 * tic80-opc.c (tic80_operands): Reorder some table entries to make
2464 the order more logical. Move the shift alias instructions ("rotl",
2465 "shl", "ins", "rotr", "extu", "exts", "srl", and "sra" to be
2466 interspersed with the regular sr.x and sl.x instructions. Add
2467 and test new instruction opcodes for "sl", "sli", "sr", "sri", "st",
2468 "sub", "subu", "swcr", and "trap".
2470 Tue Jan 14 19:42:50 1997 Fred Fish <fnf@cygnus.com>
2472 * tic80-opc.c (OFF_SS_PC): Renamed from OFF_SS.
2473 (OFF_SL_PC): Renamed from OFF_SL.
2474 (OFF_SS_BR): New operand type for base relative operand.
2475 (OFF_SL_BR): New operand type for base relative operand.
2476 (REG_BASE): New operand type for base register operand.
2477 (tic80_opcodes): Add and test "fmpy", "frndm", "frndn", "frndp",
2478 "frndz", "fsqrt", "fsub", "illop0", "illopF", "ins", "jsr",
2479 "ld", "ld.u", "lmo", "or", "rdcr", "rmo", "rotl", and "rotr"
2481 * tic80-dis.c (print_insn_tic80): Print opcode name with fixed width
2482 10 char field, padded with spaces on rhs, rather than a string
2483 followed by a tab. Use renamed TIC80_OPERAND_PCREL flag bit rather
2484 than old TIC80_OPERAND_RELATIVE. Add support for new
2485 TIC80_OPERAND_BASEREL flag bit.
2487 Mon Jan 13 15:58:56 1997 Fred Fish <fnf@cygnus.com>
2489 * tic80-dis.c (print_insn_tic80): Print floating point operands
2491 * tic80-opc.c (SPFI): Add single precision floating point
2492 immediate operand type.
2493 (ROTATE): Add rotate operand type for shifts.
2494 (ENDMASK): Add for shifts.
2495 (n): Macro for the 'n' bit.
2496 (i): Macro for the 'i' bit.
2497 (PD): Macro for the 'PD' field.
2498 (P2): Macro for the 'P2' field.
2499 (P1): Macro for the 'P1' field.
2500 (tic80_opcodes): Add entries for "exts", "extu", "fadd",
2504 Mon Jan 6 15:06:55 1997 Jeffrey A Law (law@cygnus.com)
2506 * mn10200-dis.c (disassemble): Mask off unwanted bits after
2507 adding in current address for pc-relative operands.
2509 start-sanitize-tic80
2510 Mon Jan 6 10:56:25 1997 Fred Fish <fnf@cygnus.com>
2512 * tic80-dis.c (R_SCALED): Add macro to test for ":s" modifier bit.
2513 (print_insn_tic80): If R_SCALED then print ":s" modifier for operand.
2514 * tic80-opc.c (REG0, REG22, REG27, SSOFF, LSOFF): Names
2515 changed to REG_0, REG_22, REG_DEST, OFF_SS, OFF_SL respectively.
2516 (SICR, LICR, REGM_SI, REGM_LI): Names changed to CR_SI, CR_LI,
2517 REG_BASE_M_SI, REG_BASE_M_LI respectively.
2518 (REG_SCALED, LSI_SCALED): New operand types.
2519 (E): New macro for 'E' bit at bit 27.
2520 (tic80_opcodes): Add and test dld, dld.u, dst, estop, and etrap
2521 opcodes, including the various size flavors (b,h,w,d) for
2522 the direct load and store instructions.
2524 Sun Jan 5 12:18:14 1997 Fred Fish <fnf@cygnus.com>
2526 * tic80-dis.c (M_SI, M_LI): Add macros to test for ":m" modifier bit
2528 * tic80-dis.c (print_insn_tic80): Change comma and paren handling.
2529 Use M_SI and M_LI macros to check for ":m" modifier for GPR operands.
2530 * tic80-opc.c (tic80_operands): Add REGM_SI and REGM_LI operands.
2531 (F, M_REG, M_LI, M_SI, SZ_REG, SZ_LI, SZ_SI, D, S): New bit-twiddlers.
2532 (MASK_LI_M, MASK_SI_M, MASK_REG_M): Remove and replace in opcode
2533 masks with "MASK_* & ~M_*" to get the M bit reset.
2534 (tic80_opcodes): Add bsr, bsr.a, cmnd, cmp, dcachec, and dcachef.
2536 Sat Jan 4 19:05:05 1997 Fred Fish <fnf@cygnus.com>
2538 * tic80-dis.c (print_insn_tic80): Print TIC80_OPERAND_RELATIVE
2539 correctly. Add support for printing TIC80_OPERAND_BITNUM and
2540 TIC80_OPERAND_CC, and TIC80_OPERAND_CR operands in symbolic
2542 * tic80-opc.c (tic80_operands): Add SSOFF, LSOFF, BITNUM,
2543 CC, SICR, and LICR table entries.
2544 (tic80_opcodes): Add and test "nop", "br", "bbo", "bbz",
2545 "bcnd", and "brcr" opcodes.
2548 Fri Jan 3 18:32:11 1997 Fred Fish <fnf@cygnus.com>
2550 * ppc-opc.c (powerpc_operands): Make comment match the
2551 actual fields (no shift field).
2552 * sparc-opc.c (sparc_opcodes): Document why this cannot be "const".
2553 start-sanitize-tic80
2554 * tic80-dis.c (print_insn_tic80): Replace abort stub with a
2555 partial implementation, work in progress.
2556 * tic80-opc.c (tic80_operands): Begin construction operands table.
2557 (tic80_opcodes): Continue populating opcodes table and start
2558 filling in the operand indices.
2559 (tic80_num_opcodes): Add this.
2562 Fri Jan 3 12:13:52 1997 Ian Lance Taylor <ian@cygnus.com>
2564 * m68k-opc.c: Add #B case for moveq.
2566 Thu Jan 2 12:14:29 1997 Jeffrey A Law (law@cygnus.com)
2568 * mn10300-dis.c (disassemble): Make sure all variables are initialized
2569 before they are used.
2571 Tue Dec 31 12:20:38 1996 Jeffrey A Law (law@cygnus.com)
2573 * v850-opc.c (v850_opcodes): Put curly-braces around operands
2574 for "breakpoint" instruction.
2576 Tue Dec 31 15:38:13 1996 Ian Lance Taylor <ian@cygnus.com>
2578 * Makefile.in (ALL_CFLAGS): Add -D_GNU_SOURCE.
2579 (dep): Use ALL_CFLAGS rather than CFLAGS.
2581 Tue Dec 31 15:09:16 1996 Michael Meissner <meissner@tiktok.cygnus.com>
2583 * v850-opc.c (D8_{6,7}): Set V850_OPERAND_ADJUST_SHORT_MEMORY
2586 Mon Dec 30 17:02:11 1996 Fred Fish <fnf@cygnus.com>
2588 * Makefile.in (m68k-opc.o, alpha-opc.o): Remove dis-asm.h dependency.
2589 start-sanitize-tic80
2590 (tic80-dis.o, tic80-opc.o): Add rules per comment in Makefile.in.
2593 Mon Dec 30 11:38:01 1996 Ian Lance Taylor <ian@cygnus.com>
2595 * mips16-opc.c: Add "abs".
2597 start-sanitize-tic80
2598 Sun Dec 29 10:58:22 1996 Fred Fish <fnf@cygnus.com>
2600 * Makefile.in (ALL_MACHINES): Add tic80-dis.o and tic80-opc.o.
2601 * disassemble.c (ARCH_tic80): Define if ARCH_all is defined.
2602 (disassembler): Add bfd_arch_tic80 support to set disassemble
2603 to print_insn_tic80.
2604 * tic80-dis.c (print_insn_tic80): Add stub.
2606 Fri Dec 27 22:30:57 1996 Fred Fish <fnf@cygnus.com>
2608 * configure.in (arch in $selarchs): Add bfd_tic80_arch entry.
2609 * configure: Regenerate with autoconf.
2610 * tic80-dis.c: Add file.
2611 * tic80-opc.c: Add file.
2614 Fri Dec 20 14:30:19 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2616 * d10v-opc.c (pre_defined_registers): Add cr[0-15], dpc, dpsw, link.
2618 Mon Dec 16 13:00:15 1996 Jeffrey A Law (law@cygnus.com)
2620 * mn10200-opc.c (mn10200_operands): Add SIMM16N.
2621 (mn10200_opcodes): Use it for some logicals and btst insns.
2622 Add "break" and "trap" instructions.
2624 * mn10300-opc.c (mn10300_opcodes): Add "break" instruction.
2626 * mn10200-opc.c: Add pseudo-ops for "mov (an),am" and "mov an,(am)".
2628 Sat Dec 14 22:36:20 1996 Ian Lance Taylor <ian@cygnus.com>
2630 * mips-dis.c (print_mips16_insn_arg): The base address of a PC
2631 relative load or add now depends upon whether the instruction is
2634 Wed Dec 11 09:23:46 1996 Jeffrey A Law (law@cygnus.com)
2636 * mn10200-dis.c: Finish writing disassembler.
2637 * mn10200-opc.c (mn10200_opcodes): Fix mask for "mov imm8,dn".
2638 Fix mask for "jmp (an)".
2640 * mn10300-dis.c (disassemble, print_insn_mn10300): Corrently
2641 handle endianness issues for mn10300.
2643 * mn10200-opc.c (mn10200_opcodes): Fix operands for "movb dm,(an)".
2645 Tue Dec 10 12:08:05 1996 Jeffrey A Law (law@cygnus.com)
2647 * mn10200-opc.c (mn10200_opcodes): "mov imm8,d0" is a format 2
2648 instruction. Fix opcode field for "movb (imm24),dn".
2650 * mn10200-opc.c (mn10200_operands): Fix insertion position
2653 Mon Dec 9 16:42:43 1996 Jeffrey A Law (law@cygnus.com)
2655 * mn10200-opc.c: Create mn10200 opcode table.
2656 * mn10200-dis.c: Flesh out mn10200 disassembler. Not ready,
2657 but moving along nicely.
2659 Sun Dec 8 04:28:31 1996 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2661 * Makefile.in (ALL_MACHINES): Add mips16-opc.o.
2663 Fri Dec 6 16:47:40 1996 J.T. Conklin <jtc@rhino.cygnus.com>
2665 * m68k-opc.c (m68k_opcodes): Revert change to use < and >
2666 specifiers for fmovem* instructions.
2668 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
2670 * mn10300-dis.c (disassemble): Remove '$' register prefixing.
2672 Fri Dec 6 17:34:39 1996 Ian Lance Taylor <ian@cygnus.com>
2674 * mips16-opc.c: Change opcode for entry/exit to avoid conflicting
2677 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
2679 * mn10300-opc.c: Add some comments explaining the various
2682 * mn10300-dis.c (disassemble): Fix minor gcc -Wall warnings.
2684 Thu Dec 5 12:09:48 1996 J.T. Conklin <jtc@rtl.cygnus.com>
2686 * m68k-dis.c (print_insn_arg): Handle new < and > operand
2689 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
2690 operand specifiers in fmovm* instructions.
2692 Wed Dec 4 14:52:18 1996 Ian Lance Taylor <ian@cygnus.com>
2694 * ppc-opc.c (insert_li): Give an error if the offset has the two
2695 least significant bits set.
2697 Wed Nov 27 13:09:01 1996 Ian Lance Taylor <ian@cygnus.com>
2699 * mips-dis.c (print_insn_mips16): Separate the instruction from
2700 the arguments with a tab, not a space.
2702 Tue Nov 26 13:24:17 1996 Jeffrey A Law (law@cygnus.com)
2704 * mn10300-dis.c (disasemble): Finish conversion to '$' as
2707 * mn10300-opc.c (mn10300_opcodes): Fix mask field for
2710 Tue Nov 26 10:53:21 1996 Ian Lance Taylor <ian@cygnus.com>
2712 * configure: Rebuild with autoconf 2.12.
2714 Add support for mips16 (16 bit MIPS implementation):
2715 * mips16-opc.c: New file.
2716 * mips-dis.c: Include "elf-bfd.h" and "elf/mips.h".
2717 (mips16_reg_names): New static array.
2718 (print_insn_big_mips): Use print_insn_mips16 in 16 bit mode or
2719 after seeing a 16 bit symbol.
2720 (print_insn_little_mips): Likewise.
2721 (print_insn_mips16): New static function.
2722 (print_mips16_insn_arg): New static function.
2723 * mips-opc.c: Add jalx instruction.
2724 * Makefile.in (mips16-opc.o): New target.
2725 * configure.in: Use mips16-opc.o for bfd_mips_arch.
2726 * configure: Rebuild.
2728 Mon Nov 25 16:15:17 1996 J.T. Conklin <jtc@cygnus.com>
2730 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
2731 operand specifiers in *save, *restore and movem* instructions.
2733 * m68k-opc.c (m68k_opcodes): Fix move and movem instructions for
2736 * m68k-opc.c (m68k_opcodes): The coldfire (mcf5200) can only use
2737 register operands for immediate arithmetic, not, neg, negx, and
2738 set according to condition instructions.
2740 * m68k-opc.c (m68k_opcodes): Consistantly Use "s" as the storage
2741 specifier of the effective-address operand in immediate forms of
2742 arithmetic instructions. The specifier for the immediate operand
2743 notes how and where the constant will be stored.
2745 Mon Nov 25 11:17:01 1996 Jeffrey A Law (law@cygnus.com)
2747 * mn10300-opc.c (mn10300_opcodes): Remove redundant "lcc"
2750 * mn10300-dis.c (disassemble): Use '$' instead of '%' for
2753 * mn10300-dis.c (disassemble): Prefix registers with '%'.
2755 Wed Nov 20 10:37:13 1996 Jeffrey A Law (law@cygnus.com)
2757 * mn10300-dis.c (disassemble): Handle register lists.
2759 * mn10300-opc.c: Fix handling of register list operand for
2760 "call", "ret", and "rets" instructions.
2762 * mn10300-dis.c (disassemble): Print PC-relative and memory
2763 addresses symbolically if possible.
2764 * mn10300-opc.c: Distinguish between absolute memory addresses,
2765 pc-relative offsets & random immediates.
2767 * mn10300-dis.c (print_insn_mn10300): Fix fetch of last byte
2769 (disassemble): Handle SPLIT and EXTENDED operands.
2771 Tue Nov 19 13:33:01 1996 Jeffrey A Law (law@cygnus.com)
2773 * mn10300-dis.c: Rough cut at printing some operands.
2775 * mn10300-dis.c: Start working on disassembler support.
2776 * mn10300-opc.c (mn10300_opcodes): Fix masks on several insns.
2778 * mn10300-opc.c (mn10300_operands): Add "REGS" for a register
2780 (mn10300_opcodes): Use REGS for register list in "movm" instructions.
2782 Mon Nov 18 15:20:35 1996 Michael Meissner <meissner@tiktok.cygnus.com>
2784 * d10v-opc.c (d10v_opcodes): Add3 sets the carry.
2786 Fri Nov 15 13:43:19 1996 Jeffrey A Law (law@cygnus.com)
2788 * mn10300-opc.c (mn10300_opcodes): Demand parens around
2789 register argument is calls and jmp instructions.
2791 Thu Nov 7 00:26:05 1996 Jeffrey A Law (law@cygnus.com)
2793 * mn10300-opc.c (mn10300_opcodes): Use DN01 for putx and
2794 getx operand. Fix opcode for mulqu imm,dn.
2796 Wed Nov 6 13:42:32 1996 Jeffrey A Law (law@cygnus.com)
2798 * mn10300-opc.c (mn10300_operands): Hijack "bits" field
2799 in MN10300_OPERAND_SPLIT operands for how many bits
2800 appear in the basic insn word. Add IMM32_HIGH24,
2801 IMM32_HIGH24_LOWSHIFT8, IMM8E_SHIFT8.
2802 (mn10300_opcodes): Use new operands as needed.
2804 * mn10300-opc.c (mn10300_operands): Add IMM32_LOWSHIFT8
2805 for bset, bclr, btst instructions.
2806 (mn10300_opcodes): Use new IMM32_LOWSHIFT8 as needed.
2808 * mn10300-opc.c (mn10300_operands): Remove many redundant
2809 operands. Update opcode table as appropriate.
2810 (IMM32): Add MN10300_OPERAND_SPLIT flag.
2811 (mn10300_opcodes): Fix single bit error in mov imm32,dn insn.
2813 Tue Nov 5 13:26:58 1996 Jeffrey A Law (law@cygnus.com)
2815 * mn10300-opc.c (mn10300_operands): Add DN2, DM2, AN2, AM2
2816 operands (for indexed load/stores). Fix bitpos for DI
2817 operand. Add SN8N_SHIFT8, IMM8_SHIFT8, and D16_SHIFT for the
2818 few instructions that insert immediates/displacements in the
2819 middle of the instruction. Add IMM8E for 8 bit immediate in
2820 the extended part of an instruction.
2821 (mn10300_operands): Use new opcodes as appropriate.
2823 Tue Nov 5 10:30:51 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2825 * d10v-opc.c (d10v_opcodes): Declare the trap instruction
2826 sequential so the assembler never parallelizes it with
2829 Mon Nov 4 12:50:40 1996 Jeffrey A Law (law@cygnus.com)
2831 * mn10300-opc.c (mn10300_operands): Add DN01 and AN01 for
2832 a data/address register that appears in register field 0
2833 and register field 1.
2834 (mn10300_opcodes): Use DN01 and AN01 for mov/cmp imm8,DN/AN
2836 Fri Nov 1 10:29:11 1996 Richard Henderson <rth@tamu.edu>
2838 * alpha-dis.c (print_insn_alpha): Use new NOPAL mask for
2839 standard disassembly.
2841 * alpha-opc.c (alpha_operands): Rearrange flags slot.
2842 (alpha_opcodes): Add new BWX, CIX, and MAX instructions.
2843 Recategorize PALcode instructions.
2845 Wed Oct 30 16:46:58 1996 Jeffrey A Law (law@cygnus.com)
2847 * v850-opc.c (v850_opcodes): Add relaxing "jbr".
2849 Tue Oct 29 16:30:28 1996 Ian Lance Taylor <ian@cygnus.com>
2851 * mips-dis.c (_print_insn_mips): Don't print a trailing tab if
2852 there are no operand types.
2854 Tue Oct 29 12:22:21 1996 Jeffrey A Law (law@cygnus.com)
2856 * v850-opc.c (D9_RELAX): Renamed from D9, all references
2858 (v850_operands): Make sure D22 immediately follows D9_RELAX.
2860 Fri Oct 25 12:12:53 1996 Ian Lance Taylor <ian@cygnus.com>
2862 * i386-dis.c (print_insn_x86): Set info->bytes_per_line to 5.
2864 Thu Oct 24 17:53:52 1996 Jeffrey A Law (law@cygnus.com)
2866 * v850-opc.c (insert_d8_6): Fix operand insertion for sld.w
2867 and sst.w instructions.
2869 * v850-opc.c (v850_opcodes): Add "jCC" instructions (aliases for
2872 Thu Oct 24 17:21:20 1996 Ian Lance Taylor <ian@cygnus.com>
2874 * mips-dis.c (_print_insn_mips): Use a tab between the instruction
2877 Tue Oct 22 23:32:56 1996 Ian Lance Taylor <ian@cygnus.com>
2879 * ppc-opc.c (PPCPWR2): Define.
2880 (powerpc_opcodes): Use PPCPWR2 for fsqrt, rather than duplicating
2883 Fri Oct 11 16:03:49 1996 Jeffrey A Law (law@cygnus.com)
2885 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode
2886 field for movhu instruction.
2888 * v850-dis.c (disassemble): For V850_OPERAND_SIGNED operands,
2889 cast value to "long" not "signed long" to keep hpux10
2892 Thu Oct 10 10:25:58 1996 Jeffrey A Law (law@cygnus.com)
2894 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode field
2897 * mn10300-opc.c (FMT*): Remove definitions.
2899 * mn10300-opc.c (mn10300_opcodes): Fix destination register
2900 for shift-by-register opcodes.
2902 * mn10300-opc.c (mn10300_operands): Break DN, DM, AN, AM
2903 into [AD][MN][01] for encoding the position of the register
2906 Wed Oct 9 11:19:26 1996 Jeffrey A Law (law@cygnus.com)
2908 * mn10300-opc.c (mn10300_opcodes): Add "extended" instructions,
2909 "putx", "getx", "mulq", "mulqu", "sat16", "sat24", "bsch".
2911 Tue Oct 8 11:55:35 1996 Jeffrey A Law (law@cygnus.com)
2913 * mn10300-opc.c (mn10300_operands): Remove "REGS" operand.
2914 Fix various typos. Add "PAREN" operand.
2915 (MEM, MEM2): Define.
2916 (mn10300_opcodes): Surround all memory addresses with "PAREN"
2917 operands. Fix several typos.
2919 * mn10300-opc.c (mn10300_opcodes): Fix typos in yesterday's
2922 Mon Oct 7 16:48:45 1996 Jeffrey A Law (law@cygnus.com)
2924 * mn10300-opc.c (FMT_XX): Renumber starting at one.
2925 (mn10300_operands): Rough cut. Enough to parse "mov" instructions
2927 (mn10300_opcodes): Break opcode format out into its own field.
2928 Update many operand fields to deal with signed vs unsigned
2929 issues. Fix one or two typos in the "mov" instruction
2930 opcode, mask and/or operand fields.
2932 Mon Oct 7 11:39:49 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2934 * m68k-opc.c (plusha): Prefer encoding for m68040up, in case
2935 m68851 wasn't reset.
2937 Thu Oct 3 17:17:02 1996 Ian Lance Taylor <ian@cygnus.com>
2939 * mn10300-opc.c (mn10300_opcodes): Add opcode & masks for
2940 all opcodes. Very rough cut at operands for all opcodes.
2942 * mn10300-opc.c (mn10300_opcodes): Start fleshing out the
2945 Thu Oct 3 10:06:07 1996 Jeffrey A Law (law@cygnus.com)
2947 * mn10200-opc.c, mn10300-opc.c: New files.
2948 * mn10200-dis.c, mn10300-dis.c: New files.
2949 * mn10x00-opc.c, mn10x00-dis.c: Deleted.
2950 * disassemble.c: Break mn10x00 support into 10200 and 10300
2952 * configure.in: Likewise.
2953 * configure: Rebuilt.
2955 Thu Oct 3 15:59:12 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
2957 * Makefile.in (MOSTLYCLEAN): Move config.log to distclean.
2959 Wed Oct 2 23:28:42 1996 Jeffrey A Law (law@cygnus.com)
2961 * mn10x00-opc.c, mn10x00-dis.c: New files for Matsushita
2963 * disassemble (ARCH_mn10x00): Define.
2964 (disassembler): Handle bfd_arch_mn10x00.
2965 * configure.in: Recognize bfd_mn10x00_arch.
2966 * configure: Rebuilt.
2968 Tue Oct 1 10:49:11 1996 Ian Lance Taylor <ian@cygnus.com>
2970 * i386-dis.c (op_rtn): Change to be a pointer. Adjust uses
2971 accordingly. Don't declare functions using op_rtn.
2973 Fri Sep 27 18:28:59 1996 Stu Grossman (grossman@critters.cygnus.com)
2975 * v850-dis.c (disassemble): Add memaddr argument. Re-arrange
2976 params to be more standard.
2977 * (disassemble): Print absolute addresses and symbolic names for
2978 branch and jump targets.
2979 * v850-opc.c (v850_operand): Add displacement flag to 9 and 22
2981 * (v850_opcodes): Add breakpoint insn.
2983 Mon Sep 23 12:32:26 1996 Ian Lance Taylor <ian@cygnus.com>
2985 * m68k-opc.c: Move the fmovemx data register cases before the
2986 other cases, so that they get recognized before the data register
2987 does gets treated as a degenerate register list.
2989 Tue Sep 17 12:06:51 1996 Ian Lance Taylor <ian@cygnus.com>
2991 * mips-opc.c: Add a case for "div" and "divu" with two registers
2992 and a destination of $0.
2994 Tue Sep 10 16:12:39 1996 Fred Fish <fnf@rtl.cygnus.com>
2996 * mips-dis.c (print_insn_arg): Add prototype.
2997 (_print_insn_mips): Ditto.
2999 Mon Sep 9 14:26:26 1996 Ian Lance Taylor <ian@cygnus.com>
3001 * mips-dis.c (print_insn_arg): Print condition code registers as
3004 Tue Sep 3 12:09:46 1996 Doug Evans <dje@canuck.cygnus.com>
3006 * sparc-opc.c (sparc_opcodes): Add setuw, setsw, setx.
3008 Tue Sep 3 12:05:25 1996 Jeffrey A Law (law@cygnus.com)
3010 * v850-dis.c (disassemble): Make static. Provide prototype.
3012 Sun Sep 1 22:30:40 1996 Jeffrey A Law (law@cygnus.com)
3014 * v850-opc.c (insert_d9, insert_d22): Fix boundary case
3017 Sat Aug 31 01:27:26 1996 Jeffrey A Law (law@cygnus.com)
3019 * v850-dis.c (disassemble): Handle insertion of ',', '[' and
3020 ']' characters into the output stream.
3021 * v850-opc.c (v850_opcodes: Remove size field from all opcodes.
3022 Add "memop" field to all opcodes (for the disassembler).
3023 Reorder opcodes so that "nop" comes before "mov" and "jr"
3024 comes before "jarl".
3026 * v850-dis.c (print_insn_v850): Fix typo in last change.
3028 * v850-dis.c (print_insn_v850): Properly handle disassembling
3029 a two byte insn at the end of a memory region when the memory
3030 region's size is only two byte aligned.
3032 * v850-dis.c (v850_cc_names): Fix stupid thinkos.
3034 * v850-dis.c (v850_reg_names): Define.
3035 (v850_sreg_names, v850_cc_names): Likewise.
3036 (disassemble): Very rough cut at printing operands (unformatted).
3038 * v850-opc.c (BOP_MASK): Fix.
3039 (v850_opcodes): Fix mask for jarl and jr.
3041 * v850-dis.c: New file. Skeleton for disassembler support.
3042 * Makefile.in Remove v850 references, they're not needed here.
3043 * configure.in: Add v850-dis.o when building v850 toolchains.
3044 * configure: Rebuilt.
3045 * disassemble.c (disassembler): Call v850 disassembler.
3047 * v850-opc.c (insert_d8_7, extract_d8_7): New functions.
3048 (insert_d8_6, extract_d8_6): New functions.
3049 (v850_operands): Rename D7S to D7; operand for D7 is unsigned.
3050 Rename D8 to D8_7, use {insert,extract}_d8_7 routines.
3052 (IF4A, IF4B): Use "D7" instead of "D7S".
3053 (IF4C, IF4D): Use "D8_7" instead of "D8".
3054 (IF4E, IF4F): New. Use "D8_6".
3055 (v850_opcodes): Use IF4A/IF4B for sld.b/sst.b. Use IF4C/IF4D for
3056 sld.h/sst.h. Use IF4E/IF4F for sld.w/sst.w.
3058 * v850-opc.c (insert_d16_15, extract_d16_15): New functions.
3059 (v850_operands): Change D16 to D16_15, use special insert/extract
3060 routines. New new D16 that uses the generic insert/extract code.
3061 (IF7A, IF7B): Use D16_15.
3062 (IF7C, IF7D): New. Use D16.
3063 (v850_opcodes): Use IF7C and IF7D for ld.b and st.b.
3065 * v850-opc.c (insert_d9, insert_d22): Slightly improve error
3066 message. Issue an error if the branch offset is odd.
3068 * v850-opc.c: Add notes about needing special insert/extract
3069 for all the load/store insns, except "ld.b" and "st.b".
3071 * v850-opc.c (insert_d22, extract_d22): New functions.
3072 (v850_operands): Use insert_d22 and extract_d22 for
3074 (insert_d9): Fix range check.
3076 Fri Aug 30 18:01:02 1996 J.T. Conklin <jtc@hippo.cygnus.com>
3078 * v850-opc.c (v850_operands): Add V850_OPERAND_SIGNED flag
3079 and set bits field to D9 and D22 operands.
3081 Thu Aug 29 11:10:46 1996 Jeffrey A Law (law@cygnus.com)
3083 * v850-opc.c (v850_operands): Define SR2 operand.
3084 (v850_opcodes): "ldsr" uses R1,SR2.
3086 * v850-opc.c (v850_opcodes): Fix opcode specs for
3087 sld.w, sst.b, sst.h, sst.w, and nop.
3089 Wed Aug 28 15:55:43 1996 Jeffrey A Law (law@cygnus.com)
3091 * v850-opc.c (v850_opcodes): Add null opcode to mark the
3092 end of the opcode table.
3094 Mon Aug 26 13:35:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3096 * d10v-opc.c (pre_defined_registers): Added register pairs,
3097 "r0-r1", "r2-r3", etc.
3099 Fri Aug 23 00:27:01 1996 Jeffrey A Law (law@cygnus.com)
3101 * v850-opc.c (v850_operands): Make I16 be a signed operand.
3102 Create I16U for an unsigned 16bit mmediate operand.
3103 (v850_opcodes): Use I16U for "ori", "andi" and "xori".
3105 * v850-opc.c (v850_operands): Define EP operand.
3106 (IF4A, IF4B, IF4C, IF4D): Use EP.
3108 * v850-opc.c (v850_opcodes): Fix opcode numbers for "mov"
3109 with immediate operand, "movhi". Tweak "ldsr".
3111 * v850-opc.c (v850_opcodes): Get ld.[bhw] and st.[bhw]
3112 correct. Get sld.[bhw] and sst.[bhw] closer.
3114 * v850-opc.c (v850_operands): "not" is a two byte insn
3116 * v850-opc.c (v850_opcodes): Correct bit pattern for setf.
3118 * v850-opc.c (v850_operands): D16 inserts at offset 16!
3120 * v850-opc.c (two): Get order of words correct.
3122 * v850-opc.c (v850_operands): I16 inserts at offset 16!
3124 * v850-opc.c (v850_operands): Add "SR1" and "SR2" for system
3125 register source and destination operands.
3126 (v850_opcodes): Use SR1 and SR2 for "ldsr" and "stsr".
3128 * v850-opc.c (v850_opcodes): Fix thinko in "jmp" opcode. Fix
3129 same thinko in "trap" opcode.
3131 * v850-opc.c (v850_opcodes): Add initializer for size field
3134 * v850-opc.c (v850_operands): D6 -> DS7. References changed.
3135 Add D8 for 8-bit unsigned field in short load/store insns.
3136 (IF4A, IF4D): These both need two registers.
3137 (IF4C, IF4D): Define. Use 8-bit unsigned field.
3138 (v850_opcodes): For "sld.h", "sld.w", "sst.h", "sst.w", use
3139 IF4C & IF4D. For "trap" use I5U, not I5. Add IF1 operand
3140 for "ldsr" and "stsr".
3141 * v850-opc.c (v850_operands): 3-bit immediate for bit insns
3144 * v850-opc.c (v850_opcodes): Correct short store half (sst.h) and
3145 short store word (sst.w).
3147 Thu Aug 22 16:57:27 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3149 * v850-opc.c (v850_operands): Added insert and extract fields,
3150 pointers to functions that handle unusual operand encodings.
3152 Thu Aug 22 01:05:24 1996 Jeffrey A Law (law@cygnus.com)
3154 * v850-opc.c (v850_opcodes): Enable "trap".
3156 * v850-opc.c (v850_opcodes): Fix order of displacement
3157 and register for "set1", "clr1", "not1", and "tst1".
3159 Wed Aug 21 18:46:26 1996 Jeffrey A Law (law@cygnus.com)
3161 * v850-opc.c (v850_operands): Add "B3" support.
3162 (v850_opcodes): Fix and enable "set1", "clr1", "not1"
3165 * v850-opc.c (v850_opcodes): "jmp" has only an R1 operand.
3167 * v850-opc.c: Close unterminated comment.
3169 Wed Aug 21 17:31:26 1996 J.T. Conklin <jtc@hippo.cygnus.com>
3171 * v850-opc.c (v850_operands): Add flags field.
3172 (v850_opcodes): add move opcodes.
3174 Tue Aug 20 14:41:03 1996 J.T. Conklin <jtc@hippo.cygnus.com>
3176 * Makefile.in (ALL_MACHINES): Add v850-opc.o.
3177 * configure: (bfd_v850v_arch) Add new case.
3178 * configure.in: (bfd_v850_arch) Add new case.
3179 * v850-opc.c: New file.
3181 Mon Aug 19 15:21:38 1996 Doug Evans <dje@canuck.cygnus.com>
3183 * sparc-dis.c (print_insn_sparc): Handle little endian sparcs.
3185 Thu Aug 15 13:14:43 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3187 * d10v-opc.c: Add additional information to the opcode
3188 table to help determinine which instructions can be done
3191 Thu Aug 15 13:11:13 1996 Stan Shebs <shebs@andros.cygnus.com>
3193 * mpw-make.sed: Update editing of include pathnames to be
3196 Thu Aug 15 16:28:41 1996 James G. Smith <jsmith@cygnus.co.uk>
3198 * arm-opc.h: Added "bx" instruction definition.
3200 Wed Aug 14 17:00:04 1996 Richard Henderson <rth@tamu.edu>
3202 * alpha-opc.c (EV4EXTHWINDEX): Field width should be 8 not 5.
3204 Mon Aug 12 14:30:37 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3206 * d10v-opc.c (d10v_opcodes): Minor fixes to addi and bl.l.
3208 Fri Aug 9 13:21:59 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3210 * d10v-opc.c (d10v_opcodes): Correct 'mv' unit entry to EITHER.
3212 Thu Aug 8 12:43:52 1996 Klaus Kaempf <kkaempf@progis.de>
3214 * makefile.vms: Update for alpha-opc changes.
3216 Wed Aug 7 11:55:10 1996 Ian Lance Taylor <ian@cygnus.com>
3218 * i386-dis.c (print_insn_i386): Actually return the correct value.
3219 (ONE, OP_ONE): #ifdef out; not used.
3221 Fri Aug 2 17:47:03 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3223 * d10v-opc.c (d10v_opcodes): Added 2 accumulator sub instructions.
3224 Changed subi operand type to treat 0 as 16.
3226 Wed Jul 31 16:21:41 1996 Ian Lance Taylor <ian@cygnus.com>
3228 * m68k-opc.c: Add cpushl for the mcf5200. From Ken Rose
3231 Wed Jul 31 14:39:27 1996 James G. Smith <jsmith@cygnus.co.uk>
3233 * arm-opc.h: (arm_opcodes): Added halfword and sign-extension
3234 memory transfer instructions. Add new format string entries %h and %s.
3235 * arm-dis.c: (print_insn_arm): Provide decoding of the new
3238 Fri Jul 26 11:45:04 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3240 * d10v-opc.c (d10v_operands): Added UNUM4S; a 4-bit accumulator shift.
3241 (d10v_opcodes): Modified accumulator shift instructions to use UNUM4S.
3243 Fri Jul 26 14:01:43 1996 Ian Lance Taylor <ian@cygnus.com>
3245 * alpha-dis.c (print_insn_alpha_osf): Remove.
3246 (print_insn_alpha_vms): Remove.
3247 (print_insn_alpha): Make globally visible. Chose the register
3248 names based on info->flavour.
3249 * disassemble.c: Always return print_insn_alpha for the alpha.
3251 Thu Jul 25 15:24:17 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3253 * d10v-dis.c (dis_long): Handle unknown opcodes.
3255 Thu Jul 25 12:08:09 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3257 * d10v-opc.c: Changes to support signed and unsigned numbers.
3258 All instructions with the same name that have long and short forms
3259 now end in ".l" or ".s". Divs added.
3260 * d10v-dis.c: Changes to support signed and unsigned numbers.
3262 Tue Jul 23 11:02:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3264 * d10v-dis.c: Change all functions to use info->print_address_func.
3266 Mon Jul 22 15:38:53 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
3268 * m68k-opc.c (m68k_opcodes): Make opcode masks for the ColdFire
3269 move ccr/sr insns more strict so that the disassembler only
3270 selects them when the addressing mode is data register.
3272 Mon Jul 22 11:25:24 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3273 * d10v-opc.c (pre_defined_registers): Declare.
3274 * d10v-dis.c (print_operand): Now uses pre_defined_registers
3275 to pick a better name for the registers.
3277 Mon Jul 22 13:47:23 1996 Ian Lance Taylor <ian@cygnus.com>
3279 * sparc-opc.c: Fix opcode values for fpack16, and fpackfix. Fix
3280 operands for fexpand and fpmerge. From Christian Kuehnke
3281 <Christian.Kuehnke@arbi.informatik.uni-oldenburg.de>.
3283 Mon Jul 22 13:17:06 1996 Richard Henderson <rth@tamu.edu>
3285 * alpha-dis.c (print_insn_alpha): No longer the user-visible
3286 print routine. Take new regnames and cpumask arguments.
3287 Kill the environment variable nonsense.
3288 (print_insn_alpha_osf): New function. Do OSF/1 style regnames.
3289 (print_insn_alpha_vms): New function. Do VMS style regnames.
3290 * disassemble.c (disassembler): Test bfd flavour to pick
3291 between OSF and VMS routines. Default to OSF.
3293 Thu Jul 18 17:19:34 1996 Ian Lance Taylor <ian@cygnus.com>
3295 * configure.in: Call AC_SUBST (INSTALL_SHLIB).
3296 * configure: Rebuild.
3297 * Makefile.in (install): Use @INSTALL_SHLIB@.
3299 Wed Jul 17 14:39:05 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3301 * configure: (bfd_d10v_arch) Add new case.
3302 * configure.in: (bfd_d10v_arch) Add new case.
3303 * d10v-dis.c: New file.
3304 * d10v-opc.c: New file.
3305 * disassemble.c (disassembler) Add entry for d10v.
3307 Wed Jul 17 10:12:05 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3309 * m68k-opc.c (m68k_opcodes): Fix bugs in coldfire insns relating
3310 to bcc, trapfl, subxl, and wddata discovered by Andreas Schwab.
3312 Mon Jul 15 16:59:55 1996 Stu Grossman (grossman@critters.cygnus.com)
3314 * i386-dis.c: Get rid of print_insn_i8086. Use info.mach to
3315 distinguish between variants of the instruction set.
3316 * sparc-dis.c: Get rid of print_insn_sparclite. Use info.mach to
3317 distinguish between variants of the instruction set.
3319 Fri Jul 12 10:12:01 1996 Stu Grossman (grossman@critters.cygnus.com)
3321 * i386-dis.c (print_insn_i8086): New routine to disassemble using
3322 the 8086 instruction set.
3323 * i386-dis.c: General cleanups. Make most things static. Add
3324 prototypes. Get rid of static variables aflags and dflags. Pass
3325 them as args (to almost everything).
3327 Thu Jul 11 11:58:44 1996 Jeffrey A Law (law@cygnus.com)
3329 * h8300-dis.c (bfd_h8_disassemble): Handle macregs in ldmac insns.
3331 * h8300-dis.c (bfd_h8_disassemble): Handle "ldm.l" and "stm.l".
3333 * h8300-dis.c (bfd_h8_disassemble): "abs" is implicitly two
3334 if the next arg is marked with SRC_IN_DST. Gross.
3336 * h8300-dis.c (bfd_h8_disassemble): Print "exr" when
3337 we're looking for and find EXR.
3339 * h8300-dis.c (bfd_h8_disassemble): We don't have a match
3340 if we're looking for KBIT and we don't find it.
3342 * h8300-dis.c (bfd_h8_disassemble): Mask off unwanted bits
3345 * h8300-dis.c (bfd_h8_disassemble): Don't set plen for
3346 3bit immediate operands.
3348 Tue Jul 9 10:55:20 1996 Ian Lance Taylor <ian@cygnus.com>
3350 * Released binutils 2.7.
3352 * alpha-opc.c: Add new case of "mov". From Klaus Kaempf
3353 <kkaempf@progis.ac-net.de>.
3355 Thu Jul 4 11:42:51 1996 Ian Lance Taylor <ian@cygnus.com>
3357 * alpha-opc.c: Correct second case of "mov" to use OPRL.
3359 Wed Jul 3 16:03:47 1996 Stu Grossman (grossman@critters.cygnus.com)
3361 * sparc-dis.c (print_insn_sparclite): New routine to print
3362 sparclite instructions.
3364 Wed Jul 3 14:21:18 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3366 * m68k-opc.c (m68k_opcodes): Add coldfire support.
3368 Fri Jun 28 15:53:51 1996 Doug Evans <dje@canuck.cygnus.com>
3370 * sparc-opc.c (asi_table): Add #ASI_N, #ASI_N_L, #ASI_NUCLEUS,
3371 #ASI_NUCLEUS_LITTLE. Rename #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_L
3372 to #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_LITTLE.
3374 Tue Jun 25 22:58:31 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
3376 * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir):
3377 Use autoconf-set values.
3378 (docdir, oldincludedir): Removed.
3379 * configure.in (AC_PREREQ): autoconf 2.5 or higher.
3381 Fri Jun 21 13:53:36 1996 Richard Henderson <rth@tamu.edu>
3383 * alpha-opc.c: New file.
3384 * alpha-opc.h: Remove.
3385 * alpha-dis.c: Complete rewrite to use new opcode table.
3386 * configure.in: For bfd_alpha_arch, use alpha-opc.o.
3387 * configure: Rebuild with autoconf 2.10.
3388 * Makefile.in (ALL_MACHINES): Add alpha-opc.o.
3389 (alpha-dis.o): Depend upon $(INCDIR)/opcode/alpha.h, not
3391 (alpha-opc.o): New target.
3393 Wed Jun 19 15:55:12 1996 Ian Lance Taylor <ian@cygnus.com>
3395 * sparc-dis.c (print_insn_sparc): Remove unused local variable i.
3396 Set imm_added_to_rs1 even if the source and destination register
3399 * sparc-opc.c: Add some two operand forms of the wr instruction.
3401 Tue Jun 18 15:58:27 1996 Jeffrey A. Law <law@rtl.cygnus.com>
3403 * h8300-dis.c (bfd_h8_disassemble): Rename "hmode" argument
3406 * disassemble.c (disassembler): Handle H8/S.
3407 * h8300-dis.c (print_insn_h8300s): New function for H8/S.
3409 Tue Jun 18 18:06:50 1996 Ian Lance Taylor <ian@cygnus.com>
3411 * sparc-opc.c: Add beq/teq as aliases for be/te.
3413 * ppc-opc.c: Fix fcmpo opcode. From Sergei Steshenko
3414 <sergei@msil.sps.mot.com>.
3416 Tue Jun 18 15:08:54 1996 Klaus Kaempf <kkaempf@progis.de>
3418 * makefile.vms: New file.
3420 * alpha-dis.c (print_insn_alpha): Print lda ra,lit(rz) as mov.
3422 Mon Jun 10 18:50:38 1996 Ian Lance Taylor <ian@cygnus.com>
3424 * h8300-dis.c (bfd_h8_disassemble): Always print ABS8MEM with :8,
3427 Tue Jun 4 09:15:53 1996 Doug Evans <dje@canuck.cygnus.com>
3429 * i386-dis.c (OP_OFF): Call append_prefix.
3431 Thu May 23 15:18:23 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3433 * ppc-opc.c (instruction encoding macros): Add explicit casts to
3434 unsigned long to silence a warning from the Solaris PowerPC
3437 Thu Apr 25 19:33:32 1996 Doug Evans <dje@canuck.cygnus.com>
3439 * sparc-opc.c (sparc_opcodes): Add ultrasparc vis extensions.
3441 Mon Apr 22 17:12:35 1996 Doug Evans <dje@blues.cygnus.com>
3443 * sparc-dis.c (X_IMM,X_SIMM): New macros.
3445 (print_insn_sparc): Merge cases i,I,j together. New cases X,Y.
3446 * sparc-opc.c (sparc_opcodes): Use X for 5 bit shift constants,
3447 Y for 6 bit shift constants. Rewrite entries for crdcxt, cwrcxt,
3448 cpush, cpusha, cpull sparclet insns.
3450 Wed Apr 17 14:20:22 1996 Doug Evans <dje@canuck.cygnus.com>
3452 * sparc-dis.c (compute_arch_mask): Replace ANSI style def with K&R.
3454 Thu Apr 11 17:30:02 1996 Ian Lance Taylor <ian@cygnus.com>
3456 * sparc-opc.c: Set F_FBR on floating point branch instructions.
3457 Set F_FLOAT on other floating point instructions.
3459 Mon Apr 8 17:02:48 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3461 * ppc-opc.c (PPC860): Macro for 860/821 specific instructions and
3463 (powerpc_opcodes): Add 860/821 specific SPRs.
3465 Mon Apr 8 14:00:44 1996 Ian Lance Taylor <ian@cygnus.com>
3467 * configure.in: Permit --enable-shared to specify a list of
3468 directories. Set and substitute BFD_PICLIST.
3469 * configure: Rebuild.
3470 * Makefile.in (BFD_PICLIST): Rename from BFD_LIST. Change all
3471 uses. Set to @BFD_PICLIST@.
3473 Fri Apr 5 17:12:27 1996 Jeffrey A Law (law@cygnus.com)
3475 * h8300-dis.c (bfd_h8_disassemble): Use "bit" for L_3 immediates,
3476 not "abs", which may be needed for the absolute in something
3477 like btst #0,@10:8. Print L_3 immediates separately from other
3478 immediates. Change ABSMOV reference to ABS8MEM.
3480 Wed Apr 3 10:40:45 1996 Doug Evans <dje@canuck.cygnus.com>
3482 * sparc-dis.c (opcodes_initialized): Move inside print_insn_sparc.
3483 (current_arch_mask): New static global.
3484 (compute_arch_mask): New static function.
3485 (print_insn_sparc): Delete sparc_v9_p. New static local
3486 current_mach. Resort opcode table if current_mach changes.
3487 Generalize "insn not supported" test.
3488 (compare_opcodes): Prefer supported opcodes to nonsupported ones.
3489 Delete test for v9/!v9.
3490 * sparc-opc.c (MASK_*): Use SPARC_OPCODE_ARCH_MASK.
3492 (brfc): Split into CBR and FBR for coprocessor/fp branches.
3493 (brfcx): Renamed to FBRX.
3494 (condfc): Renamed to CONDFC. Pass v6notlet to CBR (standard
3495 coprocessor mnemonics are not supported on the sparclet).
3496 (condf): Renamed to CONDF.
3497 (SLCBCC2): Delete F_ALIAS flag.
3499 Sat Mar 30 21:45:59 1996 Doug Evans <dje@canuck.cygnus.com>
3501 * sparc-opc.c (sparc_opcodes): rd must be 0 for
3502 mov foo,{%y,%psr,%wim,%tbr}. Support mov foo,%asrX.
3504 Fri Mar 29 13:02:40 1996 Ian Lance Taylor <ian@cygnus.com>
3506 * Makefile.in (config.status): Depend upon BFD VERSION file, so
3507 that the shared library version number is set correctly.
3509 Tue Mar 26 15:47:14 1996 Ian Lance Taylor <ian@cygnus.com>
3511 * configure.in: Use AC_CHECK_TOOL to find ar and ranlib. From
3512 Miles Bader <miles@gnu.ai.mit.edu>.
3513 * configure: Rebuild.
3515 Sat Mar 16 13:04:07 1996 Fred Fish <fnf@cygnus.com>
3517 * z8kgen.c (internal, gas): Call xmalloc rather than unchecked
3520 Tue Mar 12 12:14:10 1996 Ian Lance Taylor <ian@cygnus.com>
3522 * configure: Rebuild with autoconf 2.8.
3524 Thu Mar 7 15:11:10 1996 Doug Evans <dje@charmed.cygnus.com>
3526 * sparc-dis.c (print_insn_sparc): Handle 'O' operand char like 'r'.
3527 * sparc-opc.c (sparc_opcodes): Use 'O' operand char for `neg reg'.
3529 Tue Mar 5 15:51:57 1996 Ian Lance Taylor <ian@cygnus.com>
3531 * configure.in: Don't set SHLIB or SHLINK to an empty string,
3532 since they appear as targets in Makefile.in.
3533 * configure: Rebuild.
3535 Mon Feb 26 13:03:40 1996 Stan Shebs <shebs@andros.cygnus.com>
3537 * mpw-make.sed: Edit out shared library support bits.
3539 Tue Feb 20 20:48:28 1996 Doug Evans <dje@charmed.cygnus.com>
3541 * sparc-opc.c (v8,v6notv9): Add MASK_SPARCLET.
3542 (sparc_opcode_archs): Add MASK_V8 to sparclet entry.
3543 (sparc_opcodes): Add sparclet insns.
3544 (sparclet_cpreg_table): New static local.
3545 (sparc_{encode,decode}_sparclet_cpreg): New functions.
3546 * sparc-dis.c (print_insn_sparc): Handle sparclet cpregs.
3548 Tue Feb 20 11:02:44 1996 Alan Modra <alan@mullet.Levels.UniSA.Edu.Au>
3550 * i386-dis.c (index16): New static variable.
3551 (putop): Print jecxz for 32 bit case, jcxz for 16 bit, not the
3553 (OP_indirE): Return result of OP_E.
3554 (OP_E): Check for 16 bit addressing mode, and disassemble
3555 correctly. Optimised 32 bit case a little. Don't print
3556 "(base,index,scale)" when sib specifies only an offset.
3558 Mon Feb 19 12:32:17 1996 Ian Lance Taylor <ian@cygnus.com>
3560 * configure.in: Set and substitute SHLIB_DEP.
3561 * configure: Rebuild.
3562 * Makefile.in (SHLIB_DEP): New variable.
3563 (LIBIBERTY_LISTS, BFD_LIST): New variables.
3564 (stamp-piclist): Depend upon LIBIBERTY_LISTS and BFD_LIST. If
3565 COMMON_SHLIB, add them to piclist with appropriate modifications.
3566 ($(SHLIB)): Depend upon $(SHLIB_DEP). Don't check COMMON_SHLIB
3567 here: just use piclist.
3569 Mon Feb 19 02:03:50 1996 Doug Evans <dje@charmed.cygnus.com>
3571 * sparc-dis.c (MASK_V9,V9_ONLY_P,V9_P): Define.
3572 (print_insn_sparc): Rewrite v9/not-v9 tests.
3573 (compare_opcodes): Likewise.
3574 * sparc-opc.c (MASK_<ARCH>): Define.
3575 (v6,v7,v8,sparclite,v9,v9a): Redefine.
3576 (sparclet,v6notv9): Define.
3577 (sparc_opcode_archs): Delete member `conflicts'. Add `supported'.
3578 (sparc_opcodes): Delete F_NOTV9, use v6notv9 instead.
3580 Thu Feb 15 14:45:05 1996 Ian Lance Taylor <ian@cygnus.com>
3582 * configure.in: Call AC_PROG_CC before configure.host.
3583 * configure: Rebuild.
3585 * Makefile.in (SONAME): Remove leading ../bfd/ from $(SHLIB).
3587 Wed Feb 14 19:01:27 1996 Alan Modra <alan@spri.levels.unisa.edu.au>
3589 * i386-dis.c (onebyte_has_modrm): New static array.
3590 (twobyte_has_modrm): New static array.
3591 (print_insn_i386): Only fetch the mod/reg/rm byte if it is needed.
3593 Tue Feb 13 15:15:01 1996 Ian Lance Taylor <ian@cygnus.com>
3595 * Makefile.in ($(SHLINK)): Check ts against $(SHLIB), not
3598 Mon Feb 12 16:26:06 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3600 * ppc-opc.c (PPC): Undef, so default defination on Windows NT
3603 Wed Feb 7 13:59:54 1996 Ian Lance Taylor <ian@cygnus.com>
3605 * m68k-opc.c (m68k_opcodes): The bkpt instruction is supported on
3606 m68010up, not just m68020up | cpu32.
3608 * Makefile.in (SONAME): New variable.
3609 ($(SHLINK)): Make a link to the transformed name, as well.
3610 (stamp-tshlink): New target.
3611 (install): Skip stamp-tshlink during install.
3613 Tue Feb 6 12:28:54 1996 Ian Lance Taylor <ian@cygnus.com>
3615 * configure.in: Call AC_ARG_PROGRAM.
3616 * configure: Rebuild.
3617 * Makefile.in (program_transform_name): New variable.
3618 (install): Transform library name before installing it.
3620 Mon Feb 5 16:14:42 1996 Ian Lance Taylor <ian@cygnus.com>
3622 * i960-dis.c (mem): Add HX dcinva instruction.
3624 Support for building as a shared library, based on patches from
3625 Alan Modra <alan@spri.levels.unisa.edu.au>:
3626 * configure.in: Add AC_ARG_ENABLE for shared and commonbfdlib.
3627 New substitutions: ALLLIBS, PICFLAG, SHLIB, SHLIB_CC,
3628 SHLIB_CFLAGS, COMMON_SHLIB, SHLINK.
3629 * configure: Rebuild.
3630 * Makefile.in (ALLLIBS): New variable.
3631 (PICFLAG, SHLIB, SHLIB_CC, SHLIB_CFLAGS): New variables.
3632 (COMMON_SHLIB, SHLINK): New variables.
3633 (.c.o): If PICFLAG is set, compile twice, once PIC, once normal.
3634 (STAGESTUFF): Remove variable.
3635 (all): Depend upon $(ALLLIBS) rather than $(TARGETLIB).
3636 (stamp-piclist, piclist): New targets.
3637 ($(SHLIB), $(SHLINK)): New targets.
3638 ($(OFILES)): Depend upon stamp-picdir.
3639 (disassemble.o): Build twice if PICFLAG is set.
3640 (MOSTLYCLEAN): Add pic/*.o.
3641 (clean): Remove $(SHLIB), $(SHLINK), piclist, and stamp-piclist.
3642 (distclean): Remove pic and stamp-picdir.
3643 (install): Install shared libraries.
3644 (stamp-picdir): New target.
3646 Fri Feb 2 17:15:25 1996 Doug Evans <dje@charmed.cygnus.com>
3648 * sparc-dis.c (print_insn_sparc): Delete DISASM_RAW_INSN support.
3649 Print unknown instruction as "unknown", rather than in hex.
3651 Tue Jan 30 14:06:08 1996 Ian Lance Taylor <ian@cygnus.com>
3653 * dis-buf.c: Include "sysdep.h" before "dis-asm.h".
3655 Thu Jan 25 20:24:07 1996 Doug Evans <dje@charmed.cygnus.com>
3657 * sparc-opc.c (sparc_opcode_archs): Mark v8/sparclite as conflicting.
3659 Thu Jan 25 11:56:49 1996 Ian Lance Taylor <ian@cygnus.com>
3661 * i386-dis.c (print_insn_i386): Only fetch the mod/reg/rm byte
3662 when necessary. From Ulrich Drepper
3663 <drepper@myware.rz.uni-karlsruhe.de>.
3665 Thu Jan 25 03:39:10 1996 Doug Evans <dje@charmed.cygnus.com>
3667 * sparc-dis.c (print_insn_sparc): NUMOPCODES replaced with
3668 sparc_num_opcodes. Update architecture enum values.
3669 * sparc-opc.c (sparc_opcode_archs): Replaces architecture_pname.
3670 (sparc_opcode_lookup_arch): New function.
3671 (sparc_num_opcodes): Renamed from bfd_sparc_num_opcodes.
3672 (sparc_opcodes): Add v9a shutdown insn.
3674 Mon Jan 22 08:29:59 1996 Doug Evans <dje@charmed.cygnus.com>
3676 * sparc-dis.c (print_insn_sparc): Renamed from print_insn.
3677 If DISASM_RAW_INSN, print insn in hex. Handle v9a as opcode
3679 (print_insn_sparc64): Deleted.
3680 * disassemble.c (disassembler, case bfd_arch_sparc): Always use
3683 * sparc-opc.c (architecture_pname): Add v9a.
3685 Fri Jan 12 14:35:58 1996 David Mosberger-Tang <davidm@AZStarNet.com>
3687 * alpha-opc.h (alpha_insn_set): VAX floating point opcode was
3688 incorrectly defined as 0x16 when it should be 0x15.
3689 (FLOAT_FORMAT_MASK): function code is 11 bits, not just 7 bits!
3690 (alpha_insn_set): added cvtst and cvttq float ops. Also added
3691 excb (exception barrier) which is defined in the Alpha
3692 Architecture Handbook version 2.
3693 * alpha-dis.c (print_insn_alpha): Fixed special-case decoding for
3694 OPERATE_FORMAT_CODE type instructions. The bug caused mulq to be
3695 disassembled as or, for example.
3697 Wed Jan 10 12:37:22 1996 Ian Lance Taylor <ian@cygnus.com>
3699 * mips-dis.c (print_insn_arg): Print cases 'i' and 'u' in hex.
3700 (_print_insn_mips): Change i from int to unsigned int.
3702 Thu Jan 4 17:21:10 1996 David Edelsohn <edelsohn@mhpcc.edu>
3704 * ppc-opc.c (powerpc_opcodes): tlbi POWER opcode form different
3705 from tlbie PowerPC opcode. Add PPC603 tlbld and tlbli.
3707 Thu Dec 28 13:29:19 1995 John Hassey <hassey@rtp.dg.com>
3709 * i386-dis.c: Added Pentium Pro instructions.
3711 Tue Dec 19 22:56:35 1995 Michael Meissner <meissner@tiktok.cygnus.com>
3713 * ppc-opc.c (fsqrt{,.}): Duplicate for PowerPC in addition to
3716 Fri Dec 15 14:14:15 1995 J.T. Conklin <jtc@rtl.cygnus.com>
3718 * sh-opc.h (sh_nibble_type): Added REG_B.
3719 (sh_arg_type): Added A_REG_B.
3720 (sh_table): Added pref and bank reg versions of ldc, ldc.l, stc
3722 * sh-dis.c (print_insn_shx): Added cases for REG_B and A_REG_B.
3724 Fri Dec 15 16:44:31 1995 Ian Lance Taylor <ian@cygnus.com>
3726 * disassemble.c (disassembler): Use new bfd_big_endian macro.
3728 Tue Dec 12 12:22:24 1995 Ian Lance Taylor <ian@cygnus.com>
3730 * Makefile.in (distclean): Remove stamp-h. From Ronald
3731 F. Guilmette <rfg@monkeys.com>.
3733 Tue Dec 5 13:42:44 1995 Stan Shebs <shebs@andros.cygnus.com>
3735 From David Mosberger-Tang <davidm@azstarnet.com>:
3736 * alpha-dis.c (print_insn_alpha): fixed decoding of cpys
3739 Mon Dec 4 12:29:05 1995 J.T. Conklin <jtc@rtl.cygnus.com>
3741 * sh-opc.h (sh_arg_type): Added A_SSR and A_SPC.
3742 (sh_table): Added many SH3 opcodes.
3743 * sh-dis.c (print_insn_shx): Added cases for A_SSR and A_SPC.
3745 Fri Dec 1 07:42:18 1995 Michael Meissner <meissner@tiktok.cygnus.com>
3747 * ppc-opc.c (subfc., subfco): Mark this PPCCOM, not PPC.
3748 (subco,subco.): Mark this PPC, not PPCCOM.
3750 Mon Nov 27 13:09:52 1995 Ian Lance Taylor <ian@cygnus.com>
3752 * configure: Rebuild with autoconf 2.7.
3754 Tue Nov 21 18:28:06 1995 Ian Lance Taylor <ian@cygnus.com>
3756 * configure: Rebuild with autoconf 2.6.
3758 Wed Nov 15 19:02:53 1995 Ken Raeburn <raeburn@cygnus.com>
3760 * configure.in: Sort list of architectures. Accept but do nothing
3761 for alliant, convex, pyramid, romp, and tahoe.
3763 Wed Nov 8 20:18:59 1995 Ian Lance Taylor <ian@cygnus.com>
3765 * a29k-dis.c (print_special): Change num to unsigned int.
3767 Wed Nov 8 20:10:35 1995 Eric Freudenthal <freudenthal@nyu.edu>
3769 * a29k-dis.c (print_insn): Cast insn24 to unsigned long when
3772 Tue Nov 7 15:21:06 1995 Ian Lance Taylor <ian@cygnus.com>
3774 * configure.in: Call AC_CHECK_PROG to find and cache AR.
3775 * configure: Rebuilt.
3777 Mon Nov 6 17:39:47 1995 Harry Dolan <dolan@ssd.intel.com>
3779 * configure.in: Add case for bfd_i860_arch.
3780 * configure: Rebuild.
3782 Fri Nov 3 12:45:31 1995 Ian Lance Taylor <ian@cygnus.com>
3784 * m68k-opc.c (m68k_opcodes): Correct fmoveml operands.
3785 * m68k-dis.c (NEXTSINGLE): Change i to unsigned int.
3786 (NEXTDOUBLE): Likewise.
3787 (print_insn_m68k): Don't match fmoveml if there is more than one
3788 register in the list.
3789 (print_insn_arg): Handle a place of '8' for a type of 'L'.
3791 Thu Nov 2 23:06:33 1995 Ian Lance Taylor <ian@cygnus.com>
3793 * m68k-opc.c: Use #W rather than #w.
3794 * m68k-dis.c (print_insn_arg): Handle new 'W' place.
3796 Wed Nov 1 13:30:24 1995 Ian Lance Taylor <ian@cygnus.com>
3798 * m68k-opc.c (m68k_opcode_aliases): Add dbfw as an alias for dbf,
3799 and likewise for all the dbxx opcodes.
3801 Mon Oct 30 20:50:40 1995 Fred Fish <fnf@cygnus.com>
3803 * arc-dis.c: Include elf-bfd.h rather than libelf.h.
3805 Mon Oct 23 11:11:34 1995 James G. Smith <jsmith@pasanda.cygnus.co.uk>
3807 * mips-opc.c: Added shorthand (V1) for INSN_4100 manifest. Added
3808 the VR4100 specific instructions to the mips_opcodes structure.
3810 Thu Oct 19 11:05:23 1995 Stan Shebs <shebs@andros.cygnus.com>
3812 * mpw-config.in, mpw-make.sed: Remove ugly workaround for
3813 ugly Metrowerks bug in CW6, is fixed in CW7.
3815 Mon Oct 16 12:59:01 1995 Michael Meissner <meissner@tiktok.cygnus.com>
3817 * ppc-opc.c (whole file): Add flags for common/any support.
3819 Tue Oct 10 11:06:07 1995 Fred Fish <fnf@cygnus.com>
3821 * Makefile.in (BISON): Remove macro.
3822 (FLAGS_TO_PASS): Remove BISON.
3824 Fri Oct 6 16:26:45 1995 Ken Raeburn <raeburn@cygnus.com>
3826 Mon Sep 25 22:49:32 1995 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
3828 * m68k-dis.c (print_insn_m68k): Recognize all two-word
3829 instructions that take no args by looking at the match mask.
3830 (print_insn_arg): Always print "%" before register names.
3831 [case 'c']: Use "nc" for the no-cache case, as recognized by gas.
3832 [case '_']: Don't print "@#" before address.
3833 [case 'J']: Use "%s" as format string, not register name.
3834 [case 'B']: Treat place == 'C' like 'l' and 'L'.
3836 Thu Oct 5 22:16:20 1995 Ken Raeburn <raeburn@cygnus.com>
3838 * i386-dis.c: Describe cmpxchg8b operand, and spell the opcode
3841 Tue Oct 3 08:30:20 1995 steve chamberlain <sac@slash.cygnus.com>
3843 From David Mosberger-Tang <davidm@azstarnet.com>
3845 * alpha-opc.h (MEMORY_FUNCTION_FORMAT_MASK): added.
3846 (alpha_insn_set): added definitions for VAX floating point
3847 instructions (Unix compilers don't generate these, but handcoded
3848 assembly might still use them).
3850 * alpha-dis.c (print_insn_alpha): added support for disassembling
3851 the miscellaneous instructions in the Alpha instruction set.
3853 Tue Sep 26 18:47:20 1995 Stan Shebs <shebs@andros.cygnus.com>
3855 * mpw-config.in: Add m68k-opc.c.o to BFD_MACHINES for m68k,
3856 no longer create sysdep.h, sed ppc-opc.c to work around a
3857 serious Metrowerks C bug.
3858 * mpw-make.in: Remove.
3859 * mpw-make.sed: New file, used by mpw-configure to edit
3860 Makefile.in into an MPW makefile.
3862 Wed Sep 20 12:55:28 1995 Ian Lance Taylor <ian@cygnus.com>
3864 * Makefile.in (maintainer-clean): New synonym for realclean.
3866 Tue Sep 19 15:28:36 1995 Ian Lance Taylor <ian@cygnus.com>
3868 * m68k-opc.c: Split pmove patterns which use 'P' into patterns
3869 which use '0', '1', and '2' instead. Specify the proper size for
3870 a pmove immediate operand. Correct the pmovefd patterns to be
3871 moves to a register, not from a register.
3872 * m68k-dis.c (print_insn_arg): Replace 'P' with '0', '1', '2'.
3874 Thu Sep 14 11:58:22 1995 Doug Evans <dje@canuck.cygnus.com>
3876 * sparc-opc.c (sparc_opcodes): Mark all insns that reference
3877 %psr, %wim, %tbr as F_NOTV9.
3879 Fri Sep 8 01:07:38 1995 Ian Lance Taylor <ian@cygnus.com>
3881 * Makefile.in (Makefile): Just rebuild Makefile when running
3883 (config.h, stamp-h): New targets.
3884 * configure.in: Call AC_CONFIG_HEADER and AC_CANONICAL_SYSTEM
3885 earlier. Don't bother to call AC_ARG_PROGRAM. Touch stamp-h when
3886 rebuilding config.h.
3887 * configure: Rebuild.
3889 * mips-opc.c: Change unaligned loads and stores with "t,A"
3890 operands to use "t,A(b)".
3892 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3894 * sh-dis.c (print_insn_shx): Add F_FR0 support.
3896 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3898 * sh-dis.c (print_insn_shx): Change loop over op->arg[n] to iterate
3899 until 3 instead of until 2.
3901 Wed Sep 6 21:21:33 1995 Ian Lance Taylor <ian@cygnus.com>
3903 * Makefile.in (ALL_CFLAGS): Define.
3904 (.c.o, disassemble.o): Use $(ALL_CFLAGS).
3905 (MOSTLYCLEAN): Add config.log.
3906 (distclean): Don't remove config.log.
3907 * configure.in: Substitute HDEFINES.
3908 * configure: Rebuild.
3910 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3912 * sh-opc.h (sh_arg_type): Add F_FR0.
3913 (sh_table, case fmac): Add F_FR0 as first argument.
3915 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3917 * sh-opc.h (sh_opcode_info): Increase arg array size to 4.
3919 Tue Sep 5 18:28:10 1995 Doug Evans <dje@canuck.cygnus.com>
3921 * sparc-dis.c: Remove all references to NO_V9.
3923 Tue Sep 5 20:03:26 1995 Ian Lance Taylor <ian@cygnus.com>
3925 * aclocal.m4: Just include ../bfd/aclocal.m4.
3926 * configure: Rebuild.
3928 Tue Sep 5 16:09:59 1995 Doug Evans <dje@canuck.cygnus.com>
3930 * sparc-dis.c (X_DISP19): Define.
3931 (print_insn, case 'G'): Use it.
3932 (print_insn, case 'L'): Sign extend displacement.
3934 Mon Sep 4 14:28:46 1995 Ian Lance Taylor <ian@cygnus.com>
3936 * configure.in: Run ../bfd/configure.host before AC_PROG_CC.
3937 Subsitute CFLAGS and AR. Call AC_PROG_INSTALL. Don't substitute
3938 host_makefile_frag or frags.
3939 * aclocal.m4: New file.
3940 * configure: Rebuild.
3941 * Makefile.in (INSTALL): Set to @INSTALL@.
3942 (INSTALL_PROGRAM): Set to @INSTALL_PROGRAM@.
3943 (INSTALL_DATA): Set to @INSTALL_DATA@.
3945 (AR_FLAGS): Set to rc rather than qc.
3946 (CC): Define as @CC@.
3947 (CFLAGS): Set to @CFLAGS@.
3948 (@host_makefile_frag@): Remove.
3949 (config.status): Remove dependency upon @frags@.
3951 * configure.in: ../bfd/config.bfd now just sets shell variables.
3952 Use them rather than looking through target Makefile fragments.
3953 * configure: Rebuild.
3955 Thu Aug 31 12:35:32 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3957 * sh-opc.h (ftrc): Change FPUL_N to FPUL_M.
3959 Wed Aug 30 13:52:28 1995 Doug Evans <dje@canuck.cygnus.com>
3961 * sparc-opc.c (sparc_opcodes): Delete duplicate wr %y insn.
3962 Add clrx, iprefetch, signx, clruw, cas, casl, casx, casxl synthetic
3965 * sparc-opc.c (sparc_opcodes): Fix prefetcha insn.
3966 (lookup_{name,value}): New functions.
3967 (prefetch_table): New static local.
3968 (sparc_{encode,decode}_prefetch): New functions.
3969 * sparc-dis.c (print_insn): Handle '*' arg (prefetch function).
3971 Wed Aug 30 11:11:58 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3973 * sh-opc.h: Add blank lines to improve readabililty of sh3e
3976 Wed Aug 30 11:09:38 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3978 * sh-dis.c: Correct comment on first line of file.
3980 Tue Aug 29 15:37:18 1995 Doug Evans <dje@canuck.cygnus.com>
3982 * disassemble.c (disassembler): Handle bfd_mach_sparc64.
3984 * sparc-opc.c (asi, membar): New static locals.
3985 (sparc_{encode,decode}_{asi,membar}): New functions.
3986 (sparc_opcodes, membar insn): Fix.
3987 * sparc-dis.c (print_insn): Call sparc_decode_asi.
3988 Support decoding of membar masks.
3991 Sat Aug 26 21:22:48 1995 Ian Lance Taylor <ian@cygnus.com>
3993 * m68k-opc.c (m68k_opcode_aliases): Add br, brs, brb, brw, brl.
3995 Mon Aug 21 17:33:36 1995 Ian Lance Taylor <ian@cygnus.com>
3997 * m68k-opc.c (m68k_opcode_aliases): Add bhib as an alias for bhis,
3998 and likewise for the other branches. Add bhs as an alias for bcc,
3999 and likewise for the size variants. Add dbhs as an alias for
4002 Fri Aug 11 13:40:24 1995 Jeff Law (law@snake.cs.utah.edu)
4004 * sh-opc.h (FP sts instructions): Update to match reality.
4006 Mon Aug 7 16:12:58 1995 Ian Lance Taylor <ian@cygnus.com>
4008 * m68k-dis.c: (fpcr_names): Add % before all register names.
4009 (reg_names): Likewise.
4010 (print_insn_arg): Don't explicitly print % before register names.
4011 Add % before register names in static array names. In case 'r',
4012 print data registers as `@(Dn)', not `Dn@'. When printing a
4013 memory address, don't print @# before it.
4014 (print_indexed): Change base_disp and outer_disp from int to
4015 bfd_vma. Print using MIT syntax, not mutant invalid Motorola
4016 syntax. Sign extend 8 byte displacement correctly.
4017 (print_base): Print using MIT syntax. Print zpc when appropriate.
4018 Change parameter disp from int to bfd_vma.
4020 * m68k-opc.c (m68k_opcode_aliases): Add jsrl and jsrs as aliases
4023 Mon Aug 7 02:21:40 1995 Jeff Law (law@snake.cs.utah.edu)
4025 * sh-dis.c (print_insn_shx): Handle new operand types F_REG_N,
4026 F_REG_M, FPSCR_M, FPSCR_N, FPUL_M and FPUL_N.
4027 * sh-opc.h (sh_arg_type): Add new operand types.
4028 (sh_table): Add new opcodes from SH3E Floating Point ISA.
4030 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
4032 * Makefile.in (distclean): Remove generated file config.h.
4034 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
4036 * Makefile.in (distclean): Remove generated file config.h.
4038 Wed Aug 2 18:33:40 1995 Ian Lance Taylor <ian@cygnus.com>
4040 * m68k-opc.c: New file, holding tables from include/opcode/m68k.h.
4042 * m68k-dis.c: Remove BREAK_UP_BIG_DECL stuff.
4044 (print_insn_m68k): Change d to be const. Use m68k_numopcodes
4045 rather than numopcodes. Use m68k_opcodes rather than removed
4046 opcode function. Don't check F_ALIAS.
4047 (print_insn_arg): Change first parameter to be const char *.
4048 * Makefile.in (ALL_MACHINES): Add m68k-opc.o.
4049 (m68k-opc.o): New target.
4050 * configure.in: Build m68k-opc.o for bfd_m68k_arch.
4051 * configure: Rebuild.
4053 Wed Aug 2 08:23:38 1995 Doug Evans <dje@canuck.cygnus.com>
4055 * sparc-dis.c (HASH_SIZE, HASH_INSN): Define.
4056 (opcode_bits, opcode_hash_table): New variables.
4057 (opcodes_initialized): Renamed from opcodes_sorted.
4058 (build_hash_table): New function.
4059 (is_delayed_branch): Use hash table.
4060 (print_insn): Renamed from print_insn_sparc, made static.
4061 Build and use hash table. If !sparc64, ignore sparc64 insns,
4062 and vice-versa if sparc64.
4063 (print_insn_sparc, print_insn_sparc64): New functions.
4064 (compare_opcodes): Move sparc64 opcodes to end.
4065 Print commutative insns with constant second.
4066 * sparc-opc.c (all non-v9 insns): Use flag F_NOTV9 instead of F_ALIAS.
4068 Tue Aug 1 00:12:49 1995 Ian Lance Taylor <ian@cygnus.com>
4070 * sh-dis.c (print_insn_shx): Remove unused local dslot. Use
4071 print_address_func for A_BDISP12 and A_BDISP8. Correct test which
4072 avoids printing a delay slot in a delay slot.
4073 * sh-opc.h (sh_table): Fully bracket last entry.
4075 Mon Jul 31 12:04:47 1995 Doug Evans <dje@canuck.cygnus.com>
4077 * sparc-opc.c (sllx, srax, srlx): Fix disassembly.
4079 Wed Jul 12 00:59:34 1995 Ken Raeburn <raeburn@kr-pc.cygnus.com>
4081 * configure.in: Get host_makefile_frag from ${srcdir}.
4083 * configure.in: Autoconfiscated. Check for string[s].h. Create
4084 config.h from config.in. Don't set up sysdep.h link.
4085 * sysdep.h: New file.
4086 * configure, config.in: New files, generated from configure.in.
4087 * Makefile.in: Updated to be processed autoconf-style.
4088 (distclean): Keep sysdep.h. Remove config.log and config.cache.
4089 (Makefile): Depend on config.status.
4090 (config.status): New rule.
4091 * configure.bat: Update Makefile substitutions.
4093 Tue Jul 11 14:23:37 1995 Jeff Spiegel <jeffs@lsil.com>
4095 * mips-opc.c (L1): Define.
4096 (mips_opcodes): Add R4010 instructions: flushi, flushd, flushid,
4097 addciu, madd, maddu, ffc, ffs, msub, msubu, selsi, selsr, waiti,
4100 Tue Jul 11 11:49:49 1995 Ian Lance Taylor <ian@cygnus.com>
4102 * mips-opc.c (mips_opcodes): For the move pseudo-op, prefer daddu
4103 if ISA 3 and addu otherwise, replacing or, since some MIPS chips
4104 have multiple add units but only a single logical unit.
4106 * ppc-opc.c (powerpc_operands): Change CR to use a bitsize of 3,
4107 shifted by 18, without any insertion or extraction function.
4108 (insert_cr, extract_cr): Remove.
4110 Wed Jun 21 20:05:39 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4112 * m68k-dis.c (print_insn_arg, print_indexed): Print "%" before
4115 Thu Jun 15 17:23:31 1995 Stan Shebs <shebs@andros.cygnus.com>
4117 * mpw-config.in: Add sh and i386 configs, remove sparc config.
4118 * sh-opc.h: Add copyright.
4120 Mon Jun 5 03:30:43 1995 Ken Raeburn <raeburn@kr-laptop.cygnus.com>
4122 * Makefile.in (crunch-m68k): Delete extra target accidentally
4123 checked in a while ago.
4125 Wed May 24 16:22:13 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4127 * sh-opc.h (sh_table): Add SH3 support.
4129 Wed May 24 14:16:08 1995 Steve Chamberlain <sac@slash.cygnus.com>
4131 * sh-opc.h: Added bsrf and braf.
4133 Wed May 10 14:28:16 1995 Richard Earnshaw (rearnsha@armltd.co.uk)
4135 * arm-opc.h (arm_opcodes): Add 64-bit multiply patterns. Delete
4136 bogus [ls]fm{ea,fd} patterns.
4138 * arm-opc.h (arm_opcodes): Correct typos in stm, ldm, std, and ldc.
4139 * arm-dis.c (print_insn_arm): Make GIVEN a parameter, don't try and
4140 initialize it from memory. Make function static.
4141 (print_insn_{big,little}_arm): New functions.
4142 * disassemble.c (disassembler, case bfd_arch_arm): Disassemble for
4143 the correct endianness.
4145 Mon Apr 24 14:18:05 1995 Jason Molenda (crash@phydeaux.cygnus.com>
4147 * sh-opc.h (sh_nibble_type, sh_arg_type): remove trailing , from
4150 Wed Apr 19 14:07:03 1995 Michael Meissner <meissner@tiktok.cygnus.com>
4152 * m68k-dis.c (opcode): Finish change made by Kung Hsu on April
4153 17th, so that it builds again using GCC as the compiler.
4155 Tue Apr 18 12:14:51 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4157 * mips-dis.c (print_insn_little_mips): Cast return value from
4158 bfd_getl32 from bfd_vma to unsigned long, because _print_insn_mips
4159 expects an unsigned long, and that might be fewer words of
4160 argument storage (e.g., if bfd_vma is long long on a 32-bit
4162 (print_insn_big_mips): Likewise with bfd_getb32 value.
4163 (_print_insn_mips): Now static.
4165 Mon Apr 17 12:23:28 1995 Kung Hsu <kung@rtl.cygnus.com>
4167 * m68k-dis.c: Take out #define BREAK_UP_BIG_DECL kludge, because
4168 gcc memory hog problem with initializer is fixed.
4170 Mon Apr 10 15:55:01 1995 Stan Shebs <shebs@andros.cygnus.com>
4172 Merge in support for Mac MPW as a host.
4173 (Old change descriptions retained for informational value.)
4175 * mpw-config.in (archname): Compute from the config.
4176 (BFD_MACHINES, ARCHDEFS): Put into mk.tmp.
4178 * mpw-config.in (target_arch): Compute from canonical target.
4179 (m68k, mips, powerpc, sparc): Add architectures.
4180 * mpw-make.in (disassemble.c.o): Add.
4181 (ALL_CFLAGS): Remove special flags (-mc68020 -mc68881 -model far).
4183 * mpw-config.in (BFD_MACHINES): Set to a default value.
4184 * mpw-make.in (BFD_MACHINES): Remove wired-in value.
4186 * mpw-make.in (CSEARCH): Add extra-include to search path.
4188 * mpw-config.in (varargs.h): Don't create.
4189 (sysdep.h): Create using forward-include.
4190 * mpw-make.in (CSEARCH): Add include/mpw to search path.
4192 * mpw-config.in: New file, MPW version of configure.in.
4193 * mpw-make.in: New file, MPW version of Makefile.in.
4195 Fri Mar 31 14:23:38 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4197 * alpha-dis.c (print_insn_alpha): Put empty statement after
4200 Tue Mar 21 10:51:40 1995 Jeff Law (law@snake.cs.utah.edu)
4202 * hppa-dis.c (sign_extend): Delete, redundant with libhppa.h version.
4203 (low_sign_extend): Likewise.
4204 (get_field): Delete unused function.
4205 (set_field, deposit_14, deposit_21): Likewise.
4207 Fri Mar 17 15:55:53 1995 J.T. Conklin <jtc@rtl.cygnus.com>
4209 * i386-dis.c: Support for more pentium opcodes. From Guy Harris
4212 Tue Mar 14 00:52:57 1995 Ken Raeburn (raeburn@kr-pc.cygnus.com)
4214 Sat Feb 11 17:22:41 1995 Klaus Kaempf (kkaempf@didymus.rmi.de)
4216 * alpha-opc.h (OSF_ASMCODE): define
4217 print pal-code names as defined in App C of the
4218 Alpha Architecture Reference Manual
4220 * alpha-dis.c: cleaned up output
4221 print stylized code forms as defined in App A.4.3 of the
4222 Alpha Architecture Reference Manual
4224 Wed Mar 8 15:21:14 1995 Ian Lance Taylor <ian@cygnus.com>
4226 * mips-opc.c: Add new mips4 instructions. Don't set INSN_RFE for
4228 * mips-dis.c (print_insn_arg): Handle new argument types 'h', 'R',
4231 Wed Mar 8 02:54:05 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4233 * m68k-dis.c (opcode): New function. Returns address of opcode
4234 table entry given index, even if the opcode table was split to
4235 work around gcc bugs.
4236 (print_insn_m68k): Call opcode instead of referencing m68k_opcodes
4238 (BREAK_UP_BIG_DECL): Make secondary array static and const.
4239 (reg_names): Now const.
4240 (print_insn_arg): Arrays cacheFieldName and names now const.
4241 (print_indexed): Array scales now const.
4243 Tue Mar 7 16:41:21 1995 Ian Lance Taylor <ian@cygnus.com>
4245 * ppc-opc.c: Sort recently added instructions by minor opcode
4246 number within major opcode number.
4248 Mon Mar 6 10:04:36 1995 Jeff Law (law@snake.cs.utah.edu)
4250 * hppa-dis.c: Include libhppa.h.
4252 Fri Feb 24 19:15:36 1995 Ian Lance Taylor <ian@cygnus.com>
4254 * mips-opc.c: Change dli to use M_DLI, and add dla.
4256 Mon Feb 20 23:54:38 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4258 * Makefile.in (ALL_MACHINES): Add w65-dis.o.
4260 Thu Feb 16 17:34:41 1995 Ian Lance Taylor <ian@cygnus.com>
4262 * mips-opc.c: Add r4650 mul instruction.
4264 Wed Feb 15 15:45:20 1995 Ian Lance Taylor <ian@cygnus.com>
4266 * mips-opc.c: Add uld and usd macros for unaligned double load and
4269 Tue Feb 14 13:17:37 1995 Michael Meissner <meissner@tiktok.cygnus.com>
4271 * ppc-opc.c (powerpc_opcodes): Add 403GA opcodes rfci, dccci,
4272 mfdcr, mtdcr, icbt, iccci.
4274 Thu Feb 9 12:28:13 1995 Stan Shebs <shebs@andros.cygnus.com>
4276 * i960-dis.c (struct tabent, struct sparse_tabent): Change the
4277 signed char fields to shorts, more portable.
4279 Wed Feb 8 17:29:29 1995 Stan Shebs <shebs@andros.cygnus.com>
4281 * i960-dis.c (struct tabent, struct sparse_tabent): Declare the
4282 char fields as signed chars, since they may have negative values.
4284 Mon Feb 6 10:52:06 1995 J.T. Conklin <jtc@rtl.cygnus.com>
4286 * i386-dis.c (dis386_twobyte): Add cpuid, From Charles Hannum
4287 (mycroft@netbsd.org).
4289 Mon Jan 30 12:38:00 1995 Ian Lance Taylor <ian@cygnus.com>
4291 From "Logg, Ed" <elogg@ea.com>:
4292 * ppc-opc.c (extract_bdm): Correct parenthezisation.
4293 * ppc-dis.c (print_insn_powerpc): Print .long before unrecognized
4296 Thu Jan 26 18:32:08 1995 Ian Lance Taylor <ian@cygnus.com>
4298 * ppc-opc.c: Changes based on patch from David Edelsohn
4299 <edelsohn@mhpcc.edu>.
4300 (powerpc_operands): Add operands SPRBAT and SPRG. Split TBR out of
4303 (insert_tbr): New static function.
4304 (extract_tbr): New static function.
4305 (XFXFXM_MASK, XFXM): Define.
4306 (XSPRBAT_MASK, XSPRG_MASK): Define.
4307 (powerpc_opcodes): Add instructions to access special registers by
4308 name. Add mtcr and mftbu.
4310 Tue Jan 17 10:56:43 1995 Ian Lance Taylor <ian@sanguine.cygnus.com>
4312 * mips-opc.c (P3): Define.
4313 (mips_opcodes): Add mad and madu.
4315 Sun Jan 15 16:32:59 1995 Steve Chamberlain <sac@splat>
4317 * configure.in: Add W65 support.
4318 * disassemble.c: Likewise.
4319 * w65-opc.h, w65-dis.c: New files.
4321 Wed Dec 28 22:15:33 1994 Steve Chamberlain (sac@jonny.cygnus.com)
4323 * h8300-dis.c (bfd_h8_disassemble): Add support for 2 bit
4326 Tue Dec 20 11:25:12 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4328 * mips-opc.c: Add dli as a synonym for li.
4330 Thu Dec 8 18:23:31 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
4332 * alpha-dis.c (print_insn_alpha): Handle call_pal instruction, and
4333 print something for reserved opcode values, even if it won't
4336 * mips-dis.c (_print_insn_mips): When initializing, shift right
4337 and mask, to avoid sign extension problems on the Alpha.
4339 * m68k-dis.c (print_insn_arg, case 'J'): Handle buscr and pcr
4342 Wed Nov 23 22:34:51 1994 Steve Chamberlain (sac@jonny.cygnus.com)
4344 * sh-opc.h (mov.l gbr): Get direction right.
4345 * sh-dis.c (print_insn_shx): New function.
4346 (print_insn_shl, print_insn_sh): Call print_insn_shx to
4347 print opcodes with right byte order.
4349 Thu Nov 3 19:32:22 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
4351 * ns32k-dis.c (struct ns32k_option): Renamed from struct option,
4352 to avoid conflicts with getopt.
4354 Mon Oct 31 18:48:10 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4356 * hppa-dis.c (print_insn_hppa): Read the instruction using
4357 bfd_getb32, so that it works on a little endian or 64 bit host.
4358 Remove unused local variable op.
4360 Tue Oct 25 17:07:57 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4362 * mips-opc.c: Use or instead of addu for pseudo-op move, since
4363 addu does not work correctly if -mips3.
4365 Wed Oct 19 13:40:16 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4367 * a29k-dis.c (print_special): Add special register names defined
4368 on 29030, 29040 and 29050.
4369 (print_insn): Handle new operand type 'I'.
4371 Wed Oct 12 11:59:55 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4373 * Makefile.in (INSTALL): Use top level install.sh script.
4375 Wed Oct 5 19:16:29 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4377 * sparc-dis.c: Rewrite to use bitfields, rather than a union, so
4378 that it works on a little endian host.
4380 Tue Oct 4 12:14:21 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4382 * configure.in: Use ${config_shell} when running config.bfd.
4384 Wed Sep 21 18:49:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4386 * mips-opc.c (mips_opcodes): "dabs" is only available with -mips3.
4388 Thu Sep 15 16:30:22 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4390 * a29k-dis.c (print_insn): Print the opcode.
4392 Wed Sep 14 17:52:14 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4394 * mips-opc.c (mips_opcodes): Set WR_t for sc and scd.
4396 Sun Sep 11 22:32:17 1994 Jeff Law (law@snake.cs.utah.edu)
4398 * hppa-dis.c (reg_names): Use r26-r23 for arg0-arg3.
4400 Tue Sep 6 11:37:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4402 * mips-opc.c: Set INSN_STORE_MEMORY flag for all instructions
4403 which store a value into memory.
4405 Sun Sep 04 17:58:10 1994 Richard Earnshaw (rwe@pegasus.esprit.ec.org)
4407 * configure.in, Makefile.in, disassemble.c: Add support for the ARM.
4408 * arm-dis.c, arm-opc.h: New files.
4410 Fri Aug 5 14:00:05 1994 Stan Shebs (shebs@andros.cygnus.com)
4412 * Makefile.in (ns32k-dis.o): Add dependency.
4413 * ns32k-dis.c (print_insn_arg): Declare initialized local as
4414 string, not as array of chars.
4416 Thu Jul 28 18:14:16 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4418 * sparc-dis.c (print_insn_sparc): Handle new operand type 'x'.
4420 * sparc-opc.c: Added sparclite extended FP operations, and
4421 versions of v9 impdep* instructions permitting specification of
4424 Tue Jul 26 16:36:03 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4426 * i960-dis.c (reg_names): Now const.
4427 (struct sparse_tabent): New type, copied from array type in mem
4429 (ctrl): Local static array ctrl_tab now const.
4430 (cobr): Local static array cobr_tab now const.
4431 (mem): Local variables reg1, reg2, reg3 now point to const. Local
4432 static variable mem_tab no longer explicitly initialized. Changed
4433 mem_init to const array of struct sparse_tabent.
4434 (reg): Local static variable reg_tab no longer explicitly
4435 initialized. Changed reg_init to const array of struct
4437 (ea): Local static array scale_tab now const.
4439 * i960-dis.c (reg): Added i960JX instructions to reg_init table.
4442 Tue Jul 19 21:00:00 1994 DJ Delorie (dj@ctron.com)
4444 * configure.bat: the disassember needs to be enabled for
4445 "objdump -d" to work in djgpp.
4447 Wed Jul 13 18:01:58 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4449 * ns32k-dis.c: Deleted all code in "#ifdef GDB".
4450 (invalid_float): Enabled general version, doesn't require running
4451 on ns32k host. Changed to take char* argument, and test for
4452 explicitly specified sizes, instead of using sizeof() on host CPU
4454 (INVALID_FLOAT): Cast first argument.
4455 (opt_u, opt_U, opt_O, opt_C, opt_S, list_P532, list_M532,
4456 list_P032, list_M032): Now const.
4457 (optlist, list_search): Made appropriate arguments now point to
4459 (print_insn_arg): Changed static array of one-character-string
4460 pointers into a static const array of characters; fixed sprintf
4461 statement accordingly.
4463 Sun Jul 10 00:27:47 1994 Ian Dall (dall@hfrd.dsto.gov.au)
4465 * opcodes/ns32k-dis.c: Semi-new file. Had apparently been dropped
4466 from distribution. A ns32k-dis.c from a previous distribution has
4467 been brought up to date and supports the new interface.
4469 * disassemble.c: define ARCH_ns32k and add case bfd_arch_ns32k.
4471 * configure.in: add bfd_ns32k_arch target support.
4473 * Makefile.in: add ns32k-dis.o to ALL_MACHINES.
4474 Add ns32k-dis.c to CFILES. Add dependencies for ns32k-dis.o.
4476 Wed Jun 29 22:10:37 1994 Steve Chamberlain (sac@cygnus.com)
4478 * h8300-dis.c (bfd_h8_disassemble): Get 16bit branch
4481 Tue Jun 28 13:22:06 1994 Stan Shebs (shebs@andros.cygnus.com)
4483 * h8300-dis.c, mips-dis.c: Don't use true and false.
4485 Thu Jun 23 12:53:19 1994 David J. Mackenzie (djm@rtl.cygnus.com)
4487 * configure.in: Change --with-targets to --enable-targets.
4489 Wed Jun 22 13:38:32 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4491 * mips-dis.c (_print_insn_mips): Build a static hash table mapping
4492 opcodes to the first instruction with that opcode, to speed
4493 disassembly of large files. From ralphc@pyramid.com (Ralph
4496 Tue Jun 7 12:49:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4498 * Makefile.in (mostlyclean): Fix typo (was mostyclean).
4500 Wed May 11 22:32:00 1994 DJ Delorie (dj@ctron.com)
4502 * configure.bat: update to latest makefile.in
4504 Sat May 7 17:13:21 1994 Steve Chamberlain (sac@cygnus.com)
4506 * a29k-dis.c (print_insn): Print 'x' type operand in hex.
4507 * h8300-dis.c (bfd_h8_disassemble): Print 16bit rels correctly.
4508 * sh-dis.c (print_insn_sh): Don't recur endlessly if delay
4509 slot insn is in a delay slot.
4510 * z8k-opc.h: (resflg): Fix patterns.
4511 * h8500-opc.h Fix CR insn patterns.
4513 Fri May 6 14:34:46 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4515 * ppc-opc.c (powerpc_opcodes): Put PowerPC versions of "cmp" and
4516 "cmpl" before POWER versions, so that gas -many uses them.
4518 Thu Apr 28 18:32:36 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4520 * disassemble.c: New file.
4521 * Makefile.in (OFILES): Add disassemble.o.
4522 (disassemble.o): Provide dependencies; compile with $(ARCHDEFS).
4523 * configure.in: Define ARCHDEFS in Makefile. Code taken from
4524 binutils/configure.in.
4526 * m68k-dis.c (print_insn_m68k): If F_ALIAS flag is set, skip the
4527 opcode being examined.
4529 Thu Apr 21 17:08:40 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4531 * ppc-opc.c (powerpc_operands): Added RAL, RAM and RAS.
4532 (insert_ral, insert_ram, insert_ras): New functions.
4533 (powerpc_opcodes): Use RAL for load with update, RAM for lmw, and
4534 RAS for store with update.
4536 Sat Apr 16 23:41:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4538 * ppc-opc.c (powerpc_opcodes): Correct fcir. From David Edelsohn
4539 (edelsohn@npac.syr.edu).
4541 Wed Apr 6 17:11:45 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4543 * mips-opc.c (mips_opcodes): Correct operands of "nor" with an
4546 Mon Apr 4 16:30:46 1994 Doug Evans (dje@canuck.cygnus.com)
4548 * sparc-opc.c (sparc_opcodes): Fix "rd %fprs,%l0".
4550 Mon Apr 4 13:22:00 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4552 * ppc-opc.c (powerpc_operands): The signedp field has been
4553 removed, so don't initialize it. Set the PPC_OPERAND_SIGNED flag
4554 instead. Add new operand SISIGNOPT.
4555 (powerpc_opcodes): For lis, liu, addis, and cau use SISIGNOPT.
4556 Based on patch from David Edelsohn (edelsohn@npac.syr.edu).
4557 * ppc-dis.c (print_insn_powerpc): Check PPC_OPERAND_SIGNED rather
4560 Wed Mar 30 00:31:49 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4562 * i386-dis.c (struct private): Renamed to dis_private. `private'
4563 is a reserved word for dynix cc.
4565 Mon Mar 28 13:00:15 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4567 * configure.in: Change error message to refer to bfd/config.bfd
4568 rather than bfd/configure.in.
4570 Mon Mar 28 12:28:30 1994 David Edelsohn (edelsohn@npac.syr.edu)
4572 * ppc-opc.c: Define POWER2 as short alias flag.
4573 (powerpc_opcodes): Add POWER/2 opcodes lfq*, stfq*, fcir[z], and
4576 Wed Mar 23 12:23:05 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4578 * i960-dis.c (print_insn_i960): Don't read a second word for
4579 opcodes 0, 1, 2 and 3.
4581 Wed Mar 16 15:37:58 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4583 * configure.in: Don't build m68881-ext.o for bfd_m68k_arch.
4585 Mon Mar 14 14:53:50 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4587 * m68881-ext.c: Removed; no longer used.
4588 * Makefile.in: Changed accordingly.
4590 * m68k-dis.c (ext_format_68881): Don't declare.
4591 (print_insn_m68k): If an instruction uses place 'i', it uses at
4592 least four fixed bytes.
4593 (print_insn_arg): Don't bump p by 2 for case 'I', place 'i'. For
4594 extended float, convert to double using floatformat_to_double, not
4595 ieee_extended_to_double, and fetch the data before converting it.
4597 Tue Mar 8 18:12:25 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4599 * mips-opc.c: It's sqrt.s, not sqrt.w. From
4600 davidj@ICSI.Berkeley.EDU (David Johnson).
4602 Tue Feb 8 16:55:27 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4604 * ppc-opc.c (powerpc_opcodes): The POWER uses bdn[l][a] where the
4605 PowerPC uses bdnz[l][a].
4607 Tue Feb 8 00:32:28 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4609 * dis-buf.c, i386-dis.c: Include sysdep.h.
4611 Mon Feb 7 19:22:23 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4613 * configure.in (bfd_powerpc_arch): Use ppc-dis.o and ppc-opc.o.
4615 * ppc-opc.c (powerpc_opcodes): Mark POWER instructions supported
4616 by Motorola PowerPC 601 with PPC_OPCODE_601.
4617 * ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc):
4618 Disassemble Motorola PowerPC 601 instructions as well as normal
4619 PowerPC instructions.
4621 Sun Feb 6 07:45:17 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
4623 * i960-dis.c (reg, mem): Just use a static array instead of
4626 Sat Feb 5 00:04:02 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
4628 * hppa-dis.c (print_insn_hppa): For '?' and '@' only adjust the
4629 condition name index if this is for a negated condition.
4631 * hppa-dis.c (print_insn_hppa): No space before 'H' operand.
4632 Floating point format for 'H' operand is backwards from normal
4633 case (0 == double, 1 == single). For '4', '6', '7', '9', and '8'
4634 operands (fmpyadd and fmpysub), handle bizarre register
4635 translation correctly for single precision format.
4637 * hppa-dis.c (print_insn_hppa): Do not emit a space after 'F'
4638 or 'I' operands if the next format specifier is 'M' (fcmp
4639 condition completer).
4641 Feb 4 23:38:03 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4643 * ppc-opc.c (powerpc_operands): New operand type MBE to handle a
4644 single number giving a bitmask for the MB and ME fields of an M
4645 form instruction. Change NB to accept 32, and turn it into 0;
4646 also turn 0 into 32 when disassembling. Seperated SH from NB.
4647 (insert_mbe, extract_mbe): New functions.
4648 (insert_nb, extract_nb): New functions.
4649 (SC_MASK): Mask out SA and LK bits.
4650 (powerpc_opcodes): Change "cal" to use RT, D, RA rather than RT,
4651 RA, SI. Change "liu" and "cau" to use UI rather than SI. Mark
4652 "bctr" and "bctrl" as accepted by POWER. Change "rlwimi",
4653 "rlimi", "rlwimi.", "rlimi.", "rlwinm", "rlinm", "rlwinm.",
4654 "rlinm.", "rlmi", "rlmi.", "rlwnm", "rlnm", "rlwnm.", "rlnm." to
4655 use MBE rather than MB. Add "mfmq" and "mtmq" POWER instructions.
4656 (powerpc_macros): Define table of macro definitions.
4657 (powerpc_num_macros): Define.
4659 * ppc-dis.c (print_insn_powerpc): Don't skip optional operands
4660 if PPC_OPERAND_NEXT is set.
4662 Sat Jan 22 23:10:07 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4664 * i960-dis.c (print_insn_i960): Make buffer bfd_byte instead of
4665 char. Retrieve contents using bfd_getl32 instead of shifting.
4667 Fri Jan 21 19:01:39 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4669 * ppc-opc.c: New file. Opcode table for PowerPC, including
4670 opcodes for POWER (RS/6000).
4671 * ppc-dis.c: New file. PowerPC and Power (RS/6000) disassembler.
4672 * Makefile.in (ALL_MACHINES): Add ppc-dis.o and ppc-opc.o.
4673 (CFILES): Add ppc-dis.c.
4674 (ppc-dis.o, ppc-opc.o): New targets.
4675 * configure.in: Build ppc-dis.o and ppc-opc.o for bfd_rs6000_arch.
4677 Mon Jan 17 20:05:49 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
4679 * hppa-dis.c (print_insn_hppa): Handle 'N' in assembler template.
4680 No space before 'u', 'f', or 'N'.
4682 Sun Jan 16 14:20:16 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
4684 * i386-dis.c (print_insn_i386): Add FIXME comment regarding reading
4685 farther than we should.
4687 * i386-dis.c (dis386): Use Yb and Yv for scasb and scasS.
4689 Thu Jan 6 12:38:05 1994 David J. Mackenzie (djm@thepub.cygnus.com)
4691 * sparc-dis.c m68k-dis.c alpha-dis.c a29k-dis.c: Fix comments.
4693 Wed Jan 5 11:56:21 1994 David J. Mackenzie (djm@thepub.cygnus.com)
4695 * i960-dis.c (print_insn_i960): Only read word2 if the instruction
4696 needs it, to prevent reading past the end of a section.
4698 Wed Nov 17 17:20:12 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4700 * mips-opc.h: Use macro for j instruction, to support SVR4 PIC.
4701 Removed t,A case for la; always use t,A(b) case.
4703 Mon Nov 8 12:37:36 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4705 From Ted Lemen <mellon@pepper.ncd.com>
4706 * mips-dis.c (print_insn_arg): Handle 'k'.
4707 * mips-opc.c: Make cache use k, not t.
4709 Sun Nov 7 23:52:34 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4711 * alpha-opc.h, alpha-dis.c (print_insn_alpha): Add
4712 FLOAT_MEMORY_FORMAT_CODE, FLOAT_BRANCH_FORMAT_CODE, correct
4713 FLOAT_FORMAT_CODE to put out floating point register names.
4715 Mon Nov 1 18:17:51 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4717 * mips-opc.c: Use macros for jal variants, to support SVR4 PIC.
4719 Thu Oct 28 17:42:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4721 * a29k-dis.c (print_insn): Use 0x%08x, not 0x%8x.
4723 Wed Oct 27 11:48:01 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4725 * mips-opc.c (dsll, dsra, dsrl): Added '>' cases for shift counts
4726 larger than 32. Moved dsxx32 variants first for disassembler.
4728 Mon Oct 25 11:33:14 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
4730 * z8kgen.c, z8k-opc.h: Add full lda information.
4732 Tue Oct 19 12:39:25 1993 Jeffrey A Law (law@cs.utah.edu)
4734 * hppa-dis.c (print_insn_hppa): Do not emit a space after
4735 movb instructions. Any necessary space will be emitted by
4736 the code to handle nullification completers.
4738 Wed Oct 13 16:19:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4740 * mips-opc.c: Moved l.d down so that it disassembles as ldc1.
4742 Fri Oct 8 02:34:21 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4744 * alpha-opc.h: Add ldl_l, fix typo for ldq_u.
4745 * alpha-dis.c (print_insn_alpha): Add code for PAL_FORMAT_CODE.
4747 Tue Oct 5 17:47:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4749 * mips-opc.c: Correct lwu opcode value (book had it wrong).
4751 Thu Sep 30 11:26:18 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
4753 * z8k-dis.c (FETCH_DATA): get just the right amount of data.
4754 (unpack_instr): Cope with ARG_IMM4M1 type instructions.
4756 Wed Sep 29 16:24:49 1993 K. Richard Pixley (rich@sendai.cygnus.com)
4758 * m88k-dis.c (m88kdis): comment change. Remove space after
4760 (printop): handle new arg types DEC and XREG for m88110.
4762 Tue Sep 28 19:20:16 1993 Jeffrey A Law (law@snake.cs.utah.edu)
4764 * hppa-dis.c (print_insn_hppa): Handle 'z' operand
4765 type for absolute branch addresses. Delete special
4766 "ble" and "be" code in 'W' operand code.
4768 Fri Sep 24 14:08:33 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4770 * mips-opc.c: Set hazard information correctly for branch
4771 likely instructions.
4773 Fri Sep 17 04:41:17 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4775 * alpha-dis.c (print_insn_alpha), alpha-opc.h: Fix bugs, use
4776 info->fprintf_func for printing and info->print_address_func for
4779 Wed Sep 15 12:12:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4781 * mips-opc.c: Set INSN_TRAP for tXX instructions.
4783 Thu Sep 9 10:11:27 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4785 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson):
4786 Corrected second case of "b" for disassembler.
4788 Tue Sep 7 14:25:15 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4790 * mips-dis.c, m88k-dis.c: Don't include libbfd.h. Changed calls
4791 to BFD swapping routines to correspond to BFD name changes.
4793 Thu Sep 2 10:35:25 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4795 * mips-opc.c: Change div machine instruction to be z,s,t rather
4796 than s,t. Change div macro to be d,v,t rather than d,s,t.
4797 Likewise for divu, ddiv, ddivu. Added z,s,t case for drem, dremu,
4798 rem and remu which generates only the corresponding div
4799 instruction. This is for compatibility with the MIPS assembler,
4800 which only generates the simple machine instruction when an
4801 explicit destination of $0 is used.
4802 * mips-dis.c (print_insn_arg): Handle 'z' (always register zero).
4804 Thu Aug 26 17:41:44 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4806 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Set
4807 WR_31 hazard for bal, bgezal, bltzal.
4809 Thu Aug 26 17:20:02 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4811 * hppa-dis.c (print_insn_hppa): Use print function
4812 from within the disassemble_info, not fprintf_filtered.
4814 Wed Aug 25 13:51:40 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
4816 * hppa-dis.c (print_insn_hppa): Handle '|' like '>'. (From Jeff
4817 Law, law@cs.utah.edu.)
4819 Mon Aug 23 12:44:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4821 * mips-opc.c ("absu"): Removed.
4824 Fri Aug 20 10:52:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4826 * mips-opc.c: Added r6000 and r4000 instructions and macros.
4827 Changed hazard information to distinguish between memory load
4828 delays and coprocessor load delays.
4830 Wed Aug 18 15:39:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4832 * mips-opc.c: li.d uses "T,L", not "S,F". Added li.s.
4834 Tue Aug 17 09:44:42 1993 David J. Mackenzie (djm@thepub.cygnus.com)
4836 * configure.in: Don't pass cpu to config.bfd.
4838 Tue Aug 17 12:23:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4840 * m88k-dis.c (m88kdis): Make class unsigned.
4842 Thu Aug 12 15:08:18 1993 Ian Lance Taylor (ian@cygnus.com)
4844 * alpha-dis.c (print_insn_alpha): One branch format case was
4845 missing the instruction name.
4847 Wed Aug 11 19:29:39 1993 David J. Mackenzie (djm@thepub.cygnus.com)
4849 * Makefile.in (ALL_MACHINES): Renamed from DIS_LIBS.
4850 Add the arch-specific auxiliary files.
4851 (OFILES): Remove the arch-specific auxiliary files
4852 and use BFD_MACHINES instead of DIS_LIBS.
4853 * configure.in: Set BFD_MACHINES based on --with-targets option.
4855 Thu Aug 12 12:04:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4857 * mips-opc.c: Added lwc1 E,A(b) to go with lwc1 T,A(b). Similarly
4860 Sun Aug 8 15:09:30 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4862 * sparc-opc.c: Change CONST to const to deal with gcc
4863 -Dconst=__const -traditional.
4865 Fri Aug 6 10:58:55 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4867 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Took
4868 coprocessor instructions out of #if 0, and made them use new
4871 Thu Aug 5 17:11:06 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4873 * sparc-dis.c: Include ansidecl.h before opcodes/sparc.h.
4875 Fri Jul 30 18:48:15 1993 John Gilmore (gnu@cygnus.com)
4877 * sparc-opc.c: Add F_JSR, F_UNBR, or F_CONDBR flags to each branch
4878 instruction, for use by the disassembler.
4880 * sparc-dis.c (SEX): Add sign extension macro. Replace many
4881 hand-coded sign extensions that depended on 32-bit host ints.
4882 FIXME, we still depend on big-endian host bitfield ordering.
4883 (sparc_print_insn): Set the insn_info_valid field, and the
4884 other fields that describe the instruction being printed.
4886 Tue Jul 27 17:04:58 1993 Jim Wilson (wilson@sphagnum.cygnus.com)
4888 * sparc-opc.c (call): Accept all 6 addressing modes valid for
4889 `jmp' instead of just one of them.
4891 Wed Jul 21 11:43:32 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
4893 * hppa-dis.c: Move floating registers from reg_names to fp_reg_names.
4894 (fput_fp_reg_r): Renamed from fput_reg_r.
4895 (fput_fp_reg): New function.
4896 (print_insn_hppa): Use fput_fp_reg{,_r} where appropriate.
4898 * hppa-dis.c (print_insn_hppa, cases 'a', 'd'): Print space afterwards.
4900 * hppa-dis.c (print_insn_hppa, case 'd'): Use GET_COND not GET_FIELD.
4902 Mon Jul 19 13:52:21 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
4904 * hppa-dis.c (print_insn_hppa): Use extract_5r_store for 'r'.
4906 * hppa-dis.c (print_insn_hppa, case '>'): If next character is 'n',
4907 don't output a space.
4909 * hppa-dis.c (float_format_names): 10 is undefined, and 11 is quad.
4911 Sun Jul 18 16:30:02 1993 Jim Kingdon (kingdon@rtl.cygnus.com)
4913 * mips-opc.c: New file, containing opcode table from
4914 ../include/opcode/mips.h.
4915 * Makefile.in: Add it.
4917 Thu Jul 15 12:37:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4919 * m88k-dis.c: New file, moved in from gdb and changed to use the
4920 new dis-asm.h disassembler interface.
4921 * Makefile.in (DIS_LIBS): Added m88k-dis.o.
4922 (m88k-dis.o): New target.
4924 Tue Jul 13 10:04:16 1993 Ian Lance Taylor (ian@cygnus.com)
4926 * mips-dis.c (print_insn_arg, _print_insn_mips): Made pointer to
4927 argument string const char * to correspond to opcode/mips.h.
4929 Tue Jul 6 15:18:37 1993 Ian Lance Taylor (ian@cygnus.com)
4931 * mips-dis.c: Updated to account for name changes in new version
4933 * Makefile.in: Added header file dependencies.
4935 Sat Jul 3 23:47:56 1993 Doug Evans (dje@canuck.cygnus.com)
4937 * h8300-dis.c (bfd_h8_disassemble): Correct fetching of instruction.
4939 Thu Jul 1 12:23:38 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4941 * m68k-dis.c (NEXTWORD, NEXTLONG): Use ((x) ^ 0x8000) - 0x8000 to sign
4942 extend, rather than shifts.
4944 Sun Jun 20 20:56:56 1993 Ken Raeburn (raeburn@poseidon.cygnus.com)
4946 * Makefile.in: Undo 15 June change.
4948 Fri Jun 18 14:15:15 1993 Per Bothner (bothner@deneb.cygnus.com)
4950 * m68k-dis.c (print_insn_arg): Change return value to byte count
4952 * m68k-dis.c: Re-write to detect invalid operands before
4953 printing anything, so we can handle this the same way we
4954 handle invalid opcodes.
4956 Thu Jun 17 15:01:36 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
4958 * sh-dis.c, sh-opc.h: Understand some more opcodes.
4960 Wed Jun 16 13:48:05 1993 Ian Lance Taylor (ian@cygnus.com)
4962 * hppa-dis.c: Include <ansidecl.h> and sysdep.h before other
4965 Tue Jun 15 21:45:26 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
4967 * sparc-dis.c: Don't declare qsort, since sysdep.h might.
4969 * configure.in: Do make sysdep.h link.
4970 * Makefile.in: Search ../include. Don't search ../bfd.
4972 Tue Jun 15 13:36:10 1993 Stu Grossman (grossman@cygnus.com)
4974 Changes from Jeff Law, law@cs.utah.edu:
4975 * hppa-dis.c: Fix typo. 'a' and 'd' were reversed.
4976 Do not print a space before the completers specified by
4979 Fri Jun 11 18:40:21 1993 Ken Raeburn (raeburn@cygnus.com)
4981 * mips-dis.c: No longer need to bomb out if HOST_64_BIT is
4982 defined, since gdb has been fixed.
4984 Changes from Jeff Law, law@cs.utah.edu:
4985 * hppa-dis.c (print_insn_hppa): Last argument to fput_reg,
4986 fput_reg_r, fput_creg, fput_const, and fputs_filtered should
4987 be a *disassemble_info, not a *FILE.
4988 * hppa-dis.c: Support 'd', '!', and 'a'.
4989 * hppa-dis.c: Support 's' to extract a 2 bit space register.
4990 * hppa-dis.c: Delete cases which are no longer needed.
4992 Fri Jun 11 07:53:48 1993 Jim Kingdon (kingdon@cygnus.com)
4994 * m68k-dis.c (print_insn_{m68k,arg}): Add MMU codes.
4996 Tue Jun 8 12:25:01 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
4998 * h8300-dis.c: New file, removed from bfd/cpu-h8300.c, with
5001 Mon Jun 7 12:58:49 1993 Per Bothner (bothner@rtl.cygnus.com)
5003 * Makefile.in (CSEARCH): Add -I../bfd for sysdep.h and bfd.h.
5004 * configure.in: No longer need to configure to get sysdep.h.
5006 Thu Jun 3 15:56:49 1993 Stu Grossman (grossman@cygnus.com)
5008 * Patches from Jeffrey Law <law@cs.utah.edu>.
5009 * hppa-dis.c: Support 'I', 'J', and 'K' in output
5010 templates for 1.1 FP computational instructions.
5012 Tue May 25 13:05:48 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5014 * h8500-dis.c (print_insn_h8500): Address argument is type
5016 * z8k-dis.c (print_insn_z8k, print_insn_z8001, print_insn_z8002):
5019 * h8500-opc.h (addr_class_type): No comma at end of enumerator.
5020 * sh-opc.h (sh_nibble_type, sh_arg_type): Ditto.
5022 * sparc-dis.c (compare_opcodes): Move static declaration to
5025 Fri May 21 14:17:37 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
5027 * sparc-dis.c (print_insn_sparc): Implement 'n' argument for unimp
5028 instruction, remove unimp hack from 'l' argument.
5030 Wed May 19 15:35:54 1993 Stu Grossman (grossman@cygnus.com)
5032 * z8k-dis.c (fetch_data): Use unsigned char to make ancient gcc's
5035 Fri May 14 15:22:46 1993 Ian Lance Taylor (ian@cygnus.com)
5037 * Based on patches from davidj@ICSI.Berkeley.EDU (David Johnson):
5038 * mips-dis.c (print_insn_arg): Handle 'C' for general coprocessor
5041 Fri May 14 00:09:14 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5043 * hppa-dis.c: Include dis-asm.h before sysdep.h. Changed some
5044 arrays of string pointers to 2-d arrays of chars, to save
5047 Thu May 6 20:51:17 1993 Fred Fish (fnf@cygnus.com)
5049 * a29k-dis.c, alpha-dis.c, i960-dis.c, sparc-dis.c, z8k-dis.c:
5050 Cast second arg to read_memory_func to "bfd_byte *", as necessary.
5052 Tue May 4 20:31:10 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5054 * hppa-dis.c: New file from Utah, adapted to new disassembler
5056 * Makefile.in: Include it.
5058 Mon Apr 26 18:17:42 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5060 * sh-dis.c, sh-opc.h: New files.
5062 Fri Apr 23 18:51:22 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5064 * alpha-dis.c, alpha-opc.h: New files.
5066 Tue Apr 6 12:54:08 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
5068 * mips-dis.c: Sign extend 'j' and 'b' arguments, delta is a signed
5071 Mon Apr 5 17:37:37 1993 John Gilmore (gnu@cygnus.com)
5073 * sparc-dis.c: Make "ta" the default trap instruction, "t" the alias.
5075 Fri Apr 2 07:24:27 1993 Ian Lance Taylor (ian@cygnus.com)
5077 * a29k-dis.c, sparc-dis.c, sparc-opc.c: Use CONST rather than
5080 Thu Apr 1 11:20:43 1993 Jim Kingdon (kingdon@cygnus.com)
5082 * sparc-dis.c: Use fprintf_func a few places where I forgot,
5083 and double percent signs a few places.
5085 * a29k-dis.c, i960-dis.c: New, merged from gdb and binutils.
5087 * i386-dis.c, m68k-dis.c, mips-dis.c, sparc-dis.c:
5088 Use info->print_address_func not print_address.
5090 * dis-buf.c (generic_print_address): New function.
5092 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5094 * Makefile.in: Add sparc-dis.c.
5095 sparc-dis.c: New file, merges binutils and gdb versions as follows:
5097 Add `add' instruction to the set that get checked
5098 for a preceding `sethi' in order to print an absolute address.
5099 * (print_insn): Disassembly prefers real instructions.
5100 (is_delayed_branch): Speed up.
5101 * sparc-opcode.h: Add ALIAS bit to aliases. Fix up opcode tables.
5102 Still missing some float ops, and needs testing.
5103 * sparc-pinsn.c (print_insn): Eliminate 'set' test, subsumed by
5104 F_ALIAS. Use printf, not fprintf, when not passing a file
5106 (compare_opcodes): Check that identical instructions have
5107 identical opcodes, complain otherwise.
5110 * Include reg_names.
5112 Use dis-asm.h/read_memory_func interface.
5114 Wed Mar 31 20:49:06 1993 K. Richard Pixley (rich@rtl.cygnus.com)
5116 * h8500-dis.c, i386-dis.c, m68k-dis.c, z8k-dis.c (fetch_data):
5117 deliberately return non-zero to setjmp from longjmp. Otherwise
5118 this code fails to compile.
5120 Wed Mar 31 17:04:31 1993 Stu Grossman (grossman@cygnus.com)
5122 * m68k-dis.c: Fix prototype for fetch_arg().
5124 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5126 * dis-buf.c: New file, for new read_memory_func interface.
5127 Makefile.in (OFILES): Include it.
5128 m68k-dis.c, i386-dis.c, h8500-dis.c, mips-dis.c, z8k-dis.c:
5129 Use new read_memory_func interface.
5131 Mon Mar 29 14:02:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5133 * h8500-dis.c (print_insn_h8500): Get sign of fp offsets right.
5134 * h8500-opc.h: Fix couple of opcodes.
5136 Wed Mar 24 02:03:36 1993 david d `zoo' zuhn (zoo at poseidon.cygnus.com)
5138 * Makefile.in: add dvi & installcheck targets
5140 Mon Mar 22 18:55:04 1993 John Gilmore (gnu@cygnus.com)
5142 * Makefile.in: Update for h8500-dis.c.
5144 Fri Mar 19 14:27:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5146 * h8500-dis.c, h8500-opc.h: New files
5148 Thu Mar 18 14:12:37 1993 Per Bothner (bothner@rtl.cygnus.com)
5150 * mips-dis.c, z8k-dis.c: Converted to use interface defined in
5151 ../include/dis-asm.h.
5152 * m68k-dis.c: New file (merge of ../binutils/m68k-pinsn.c
5153 and ../gdb/m68k-pinsn.c).
5154 * i386-dis.c: New file (merge of ../binutils/i386-pinsn.c
5155 and ../gdb/i386-pinsn.c).
5156 * m68881-ext.c: New file. Moved definition of
5157 ext_format ext_format_68881 from ../gdb/m68k-tdep.c.
5158 * Makefile.in: Adjust for new files.
5159 * i386-dis.c: Patches from John Hassey (hassey@dg-rtp.dg.com).
5160 * m68k-dis.c: Recognize '9' placement code, so (say) pflush
5161 can be dis-assembled.
5163 Wed Feb 17 09:19:47 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5165 * mips-dis.c (print_insn_arg): Now returns void.
5167 Mon Jan 11 16:09:16 1993 Fred Fish (fnf@cygnus.com)
5169 * mips-dis.c (ansidecl.h): Include for benefit of sysdep.h
5170 files that use the macros.
5172 Thu Jan 7 13:15:17 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5174 * mips-dis.c: New file, from gdb/mips-pinsn.c.
5175 * Makefile.in (DIS_LIBS): Added mips-dis.o.
5176 (CFILES): Added mips-dis.c.
5178 Thu Jan 7 07:36:33 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5180 * z8k-dis.c (print_insn_z8001, print_insn_z8002): new routines
5181 * z8kgen.c, z8k-opc.h: fix sizes of some shifts.
5183 Tue Dec 22 15:42:44 1992 Per Bothner (bothner@rtl.cygnus.com)
5185 * Makefile.in: Improve *clean rules.
5186 * configure.in: Allow a default host.
5188 Tue Nov 17 19:53:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5190 * Makefile.in: also use -I$(srcdir)/../bfd, since some sysdep
5191 files include other sysdep files
5193 Thu Nov 12 16:10:37 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5195 * z8k-dis.c z8k-opc.h z8kgen.c: checkpoint
5197 Fri Oct 9 04:56:05 1992 John Gilmore (gnu@cygnus.com)
5199 * configure.in: For host support, use ../bfd/configure.host
5200 so it stays in sync with the ../bfd/hosts database.
5202 Thu Oct 1 23:38:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5204 * configure.in: use cpu-vendor-os triple instead of nested cases
5206 Wed Sep 30 16:09:20 1992 Michael Werner (mtw@cygnus.com)
5208 * z8k-dis.c (unparse_instr): fix bug where opcode returned was
5209 *always* the wrong one.
5211 Wed Sep 30 07:42:17 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5213 * z8kgen.c: added copyright info
5215 Tue Sep 29 12:20:21 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5217 * z8k-dis.c (unparse_instr): prettier tabs
5218 * z8kgen.c -> z8k-opc.h: bug fixes in tables
5220 Fri Sep 25 12:50:32 1992 Stu Grossman (grossman at cygnus.com)
5222 * configure.in: Add ncr* configuration.
5223 * z8k-dis.c (struct instr_data_s): Make instr_asmsrc char to make
5224 picayune ANSI compilers happy.
5226 Sep 20 08:50:55 1992 Fred Fish (fnf@cygnus.com)
5228 * configure.in (i386): Make i386 and i486 synonymous for now.
5229 * configure.in (i[34]86-*-sysv4): Add my_host definition.
5231 Fri Sep 18 17:01:23 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
5233 * Makefile.in (install): Fix typo.
5235 Fri Sep 18 02:04:24 1992 John Gilmore (gnu@cygnus.com)
5237 * Makefile.in (make): Remove obsolete crud.
5238 (sparc-opc.o): Avoid Sun Make VPATH bug.
5240 Tue Sep 8 17:29:27 1992 K. Richard Pixley (rich@sendai.cygnus.com)
5242 * Makefile.in: since there are no SUBDIRS, remove rule and
5243 references of subdir_do.
5245 Tue Sep 8 17:02:58 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
5247 * Makefile.in (install): Get the library name right here too.
5248 Don't install bfd.h, since it's unrelated to this library. No
5249 subdirs to recurse into, either.
5250 (CFILES): The source file has a .c suffix, not .o.
5252 * sparc-opc.c: New file, moved from BFD.
5253 * Makefile.in (OFILES): Build it.
5255 Thu Sep 3 16:59:20 1992 Michael Werner (mtw@cygnus.com)
5257 * z8k-dis.c: fixed forward refferences of some declarations.
5259 Mon Aug 31 16:09:45 1992 Michael Werner (mtw@cygnus.com)
5261 * Makefile.in: get the name of the library right
5263 Mon Aug 31 13:47:35 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5265 * z8k-dis.c: knows how to disassemble z8k stuff
5266 * z8k-opc.h: new file full of z8000 opcodes
5270 version-control: never