scripts/Kbuild.include

   1 ####
   2 # kbuild: Generic definitions
   3
   4 # Convenient variables
   5 comma   := ,
   6 squote  := '
   7 empty   :=
   8 space   := $(empty) $(empty)
   9
  10 ###
  11 # Name of target with a '.' as filename prefix. foo/bar.o => foo/.bar.o
  12 dot-target = $(dir $@).$(notdir $@)
  13
  14 ###
  15 # The temporary file to save gcc -MD generated dependencies must not
  16 # contain a comma
  17 depfile = $(subst $(comma),_,$(dot-target).d)
  18
  19 ###
  20 # filename of target with directory and extension stripped
  21 basetarget = $(basename $(notdir $@))
  22
  23 ###
  24 # Escape single quote for use in echo statements
  25 escsq = $(subst $(squote),'\$(squote)',$1)
  26
  27 ###
  28 # Easy method for doing a status message
  29        kecho := :
  30  quiet_kecho := echo
  31 silent_kecho := :
  32 kecho := $($(quiet)kecho)
  33
  34 ###
  35 # filechk is used to check if the content of a generated file is updated.
  36 # Sample usage:
  37 # define filechk_sample
  38 #       echo $KERNELRELEASE
  39 # endef
  40 # version.h : Makefile
  41 #       $(call filechk,sample)
  42 # The rule defined shall write to stdout the content of the new file.
  43 # The existing file will be compared with the new one.
  44 # - If no file exist it is created
  45 # - If the content differ the new file is used
  46 # - If they are equal no change, and no timestamp update
  47 # - stdin is piped in from the first prerequisite ($<) so one has
  48 #   to specify a valid file as first prerequisite (often the kbuild file)
  49        chk_filechk = :
  50  quiet_chk_filechk = echo '  CHK     $@'
  51 silent_chk_filechk = :
  52        upd_filechk = :
  53  quiet_upd_filechk = echo '  UPD     $@'
  54 silent_upd_filechk = :
  55
  56 define filechk
  57         $(Q)set -e;                             \
  58         $($(quiet)chk_filechk);                 \
  59         mkdir -p $(dir $@);                     \
  60         $(filechk_$(1)) < $< > $@.tmp;          \
  61         if [ -r $@ ] && cmp -s $@ $@.tmp; then  \
  62                 rm -f $@.tmp;                   \
  63         else                                    \
  64                 $($(quiet)upd_filechk);         \
  65                 mv -f $@.tmp $@;                \
  66         fi
  67 endef
  68
  69 ######
  70 # gcc support functions
  71 # See documentation in Documentation/kbuild/makefiles.txt
  72
  73 # cc-cross-prefix
  74 # Usage: CROSS_COMPILE := $(call cc-cross-prefix, m68k-linux-gnu- m68k-linux-)
  75 # Return first prefix where a prefix$(CC) is found in PATH.
  76 # If no $(CC) found in PATH with listed prefixes return nothing
  77 cc-cross-prefix =  \
  78         $(word 1, $(foreach c,$(1),                                   \
  79                 $(shell set -e;                                       \
  80                 if (which $(strip $(c))$(CC)) > /dev/null 2>&1 ; then \
  81                         echo $(c);                                    \
  82                 fi)))
  83
  84 # output directory for tests below
  85 TMPOUT := $(if $(KBUILD_EXTMOD),$(firstword $(KBUILD_EXTMOD))/)
  86
  87 # try-run
  88 # Usage: option = $(call try-run, $(CC)...-o "$$TMP",option-ok,otherwise)
  89 # Exit code chooses option. "$$TMP" is can be used as temporary file and
  90 # is automatically cleaned up.
  91 try-run = $(shell set -e;               \
  92         TMP="$(TMPOUT).$$$$.tmp";       \
  93         if ($(1)) >/dev/null 2>&1;      \
  94         then echo "$(2)";               \
  95         else echo "$(3)";               \
  96         fi;                             \
  97         rm -f "$$TMP")
  98
  99 # as-option
 100 # Usage: cflags-y += $(call as-option,-Wa$(comma)-isa=foo,)
 101
 102 as-option = $(call try-run,\
 103         $(CC) $(KBUILD_CFLAGS) $(1) -c -xassembler /dev/null -o "$$TMP",$(1),$(2))
 104
 105 # as-instr
 106 # Usage: cflags-y += $(call as-instr,instr,option1,option2)
 107
 108 as-instr = $(call try-run,\
 109         echo -e "$(1)" | $(CC) $(KBUILD_AFLAGS) -c -xassembler -o "$$TMP" -,$(2),$(3))
 110
 111 # cc-option
 112 # Usage: cflags-y += $(call cc-option,-march=winchip-c6,-march=i586)
 113
 114 cc-option = $(call try-run,\
 115         $(CC) $(KBUILD_CFLAGS) $(1) -c -xc /dev/null -o "$$TMP",$(1),$(2))
 116
 117 # cc-option-yn
 118 # Usage: flag := $(call cc-option-yn,-march=winchip-c6)
 119 cc-option-yn = $(call try-run,\
 120         $(CC) $(KBUILD_CFLAGS) $(1) -c -xc /dev/null -o "$$TMP",y,n)
 121
 122 # cc-option-align
 123 # Prefix align with either -falign or -malign
 124 cc-option-align = $(subst -functions=0,,\
 125         $(call cc-option,-falign-functions=0,-malign-functions=0))
 126
 127 # cc-version
 128 # Usage gcc-ver := $(call cc-version)
 129 cc-version = $(shell $(CONFIG_SHELL) $(srctree)/scripts/gcc-version.sh $(CC))
 130
 131 # cc-fullversion
 132 # Usage gcc-ver := $(call cc-fullversion)
 133 cc-fullversion = $(shell $(CONFIG_SHELL) \
 134         $(srctree)/scripts/gcc-version.sh -p $(CC))
 135
 136 # cc-ifversion
 137 # Usage:  EXTRA_CFLAGS += $(call cc-ifversion, -lt, 0402, -O1)
 138 cc-ifversion = $(shell [ $(call cc-version, $(CC)) $(1) $(2) ] && echo $(3))
 139
 140 # ld-option
 141 # Usage: ldflags += $(call ld-option, -Wl$(comma)--hash-style=both)
 142 ld-option = $(call try-run,\
 143         $(CC) $(1) -nostdlib -xc /dev/null -o "$$TMP",$(1),$(2))
 144
 145 ######
 146
 147 ###
 148 # Shorthand for $(Q)$(MAKE) -f scripts/Makefile.build obj=
 149 # Usage:
 150 # $(Q)$(MAKE) $(build)=dir
 151 build := -f $(if $(KBUILD_SRC),$(srctree)/)scripts/Makefile.build obj
 152
 153 # Prefix -I with $(srctree) if it is not an absolute path.
 154 # skip if -I has no parameter
 155 addtree = $(if $(patsubst -I%,%,$(1)), \
 156 $(if $(filter-out -I/%,$(1)),$(patsubst -I%,-I$(srctree)/%,$(1))) $(1))
 157
 158 # Find all -I options and call addtree
 159 flags = $(foreach o,$($(1)),$(if $(filter -I%,$(o)),$(call addtree,$(o)),$(o)))
 160
 161 # echo command.
 162 # Short version is used, if $(quiet) equals `quiet_', otherwise full one.
 163 echo-cmd = $(if $($(quiet)cmd_$(1)),\
 164         echo '  $(call escsq,$($(quiet)cmd_$(1)))$(echo-why)';)
 165
 166 # printing commands
 167 cmd = @$(echo-cmd) $(cmd_$(1))
 168
 169 # Add $(obj)/ for paths that are not absolute
 170 objectify = $(foreach o,$(1),$(if $(filter /%,$(o)),$(o),$(obj)/$(o)))
 171
 172 ###
 173 # if_changed      - execute command if any prerequisite is newer than
 174 #                   target, or command line has changed
 175 # if_changed_dep  - as if_changed, but uses fixdep to reveal dependencies
 176 #                   including used config symbols
 177 # if_changed_rule - as if_changed but execute rule instead
 178 # See Documentation/kbuild/makefiles.txt for more info
 179
 180 ifneq ($(KBUILD_NOCMDDEP),1)
 181 # Check if both arguments has same arguments. Result is empty string if equal.
 182 # User may override this check using make KBUILD_NOCMDDEP=1
 183 arg-check = $(strip $(filter-out $(cmd_$(1)), $(cmd_$@)) \
 184                     $(filter-out $(cmd_$@),   $(cmd_$(1))) )
 185 endif
 186
 187 # >'< substitution is for echo to work,
 188 # >$< substitution to preserve $ when reloading .cmd file
 189 # note: when using inline perl scripts [perl -e '...$$t=1;...']
 190 # in $(cmd_xxx) double $$ your perl vars
 191 make-cmd = $(subst \#,\\\#,$(subst $$,$$$$,$(call escsq,$(cmd_$(1)))))
 192
 193 # Find any prerequisites that is newer than target or that does not exist.
 194 # PHONY targets skipped in both cases.
 195 any-prereq = $(filter-out $(PHONY),$?) $(filter-out $(PHONY) $(wildcard $^),$^)
 196
 197 # Execute command if command has changed or prerequisite(s) are updated.
 198 #
 199 if_changed = $(if $(strip $(any-prereq) $(arg-check)),                       \
 200         @set -e;                                                             \
 201         $(echo-cmd) $(cmd_$(1));                                             \
 202         echo 'cmd_$@ := $(make-cmd)' > $(dot-target).cmd)
 203
 204 # Execute the command and also postprocess generated .d dependencies file.
 205 if_changed_dep = $(if $(strip $(any-prereq) $(arg-check) ),                  \
 206         @set -e;                                                             \
 207         $(echo-cmd) $(cmd_$(1));                                             \
 208         scripts/basic/fixdep $(depfile) $@ '$(make-cmd)' > $(dot-target).tmp;\
 209         rm -f $(depfile);                                                    \
 210         mv -f $(dot-target).tmp $(dot-target).cmd)
 211
 212 # Usage: $(call if_changed_rule,foo)
 213 # Will check if $(cmd_foo) or any of the prerequisites changed,
 214 # and if so will execute $(rule_foo).
 215 if_changed_rule = $(if $(strip $(any-prereq) $(arg-check) ),                 \
 216         @set -e;                                                             \
 217         $(rule_$(1)))
 218
 219 ###
 220 # why - tell why a a target got build
 221 #       enabled by make V=2
 222 #       Output (listed in the order they are checked):
 223 #          (1) - due to target is PHONY
 224 #          (2) - due to target missing
 225 #          (3) - due to: file1.h file2.h
 226 #          (4) - due to command line change
 227 #          (5) - due to missing .cmd file
 228 #          (6) - due to target not in $(targets)
 229 # (1) PHONY targets are always build
 230 # (2) No target, so we better build it
 231 # (3) Prerequisite is newer than target
 232 # (4) The command line stored in the file named dir/.target.cmd
 233 #     differed from actual command line. This happens when compiler
 234 #     options changes
 235 # (5) No dir/.target.cmd file (used to store command line)
 236 # (6) No dir/.target.cmd file and target not listed in $(targets)
 237 #     This is a good hint that there is a bug in the kbuild file
 238 ifeq ($(KBUILD_VERBOSE),2)
 239 why =                                                                        \
 240     $(if $(filter $@, $(PHONY)),- due to target is PHONY,                    \
 241         $(if $(wildcard $@),                                                 \
 242             $(if $(strip $(any-prereq)),- due to: $(any-prereq),             \
 243                 $(if $(arg-check),                                           \
 244                     $(if $(cmd_$@),- due to command line change,             \
 245                         $(if $(filter $@, $(targets)),                       \
 246                             - due to missing .cmd file,                      \
 247                             - due to $(notdir $@) not in $$(targets)         \
 248                          )                                                   \
 249                      )                                                       \
 250                  )                                                           \
 251              ),                                                              \
 252              - due to target missing                                         \
 253          )                                                                   \
 254      )
 255
 256 echo-why = $(call escsq, $(strip $(why)))
 257 endif