1 2013-11-07 Will Newton <will.newton@linaro.org>
4 * arm/wrapper.c (sim_create_inferior): Call init before
7 2013-11-07 Will Newton <will.newton@linaro.org>
10 * arm/wrapper.c (sim_create_inferior): Avoid calling
11 bfd_get_mach with a NULL bfd.
13 2013-06-21 Nick Clifton <nickc@redhat.com>
15 * msp430: New Directory.
16 * configure.tgt: Add it.
17 * configure: Regenerate.
19 2013-03-15 Steve Ellcey <sellcey@mips.com>
21 * arm/wrapper.c (sim_complete_command): Make char arguments const.
22 * avr/interp.c (sim_complete_command): Ditto.
23 * common/sim-options.c (sim_complete_command): Ditto.
24 * cr16/interp.c (sim_complete_command): Ditto.
25 * erc32/interf.c (sim_complete_command): Ditto.
26 * m32c/gdb-if.c (sim_complete_command): Ditto.
27 * microblaze/interp.c (sim_complete_command): Ditto.
28 * ppc/sim_calls.c (sim_complete_command): Ditto.
29 * rl78/gdb-if.c (sim_complete_command): Ditto.
30 * rx/gdb-if.c (sim_complete_command): Ditto.
31 * sh/interp.c (sim_complete_command): Ditto.
33 2013-01-01 Joel Brobecker <brobecker@adacore.com>
35 Update year range in copyright notice of all files.
37 2012-12-19 Joel Brobecker <brobecker@adacore.com>
39 Update old contact info in GPL license notices.
41 2012-12-19 Joel Brobecker <brobecker@adacore.com>
43 Update the non-FSF-copyrighted files in sim to GPLv3 or later.
45 2012-11-20 Pavel Chupin <pavel.v.chupin@intel.com>
47 * common/Make-common.in: Use lt_cv_dlopen_libs under PLUGINS
49 * common/acinclude.m4: Define lt_cv_dlopen_libs.
50 * arm/configure: Regenerate.
51 * avr/configure: Regenerate.
52 * bfin/configure: Regenerate.
53 * common/configure: Regenerate.
54 * cr16/configure: Regenerate.
55 * cris/configure: Regenerate.
56 * d10v/configure: Regenerate.
57 * erc32/configure: Regenerate.
58 * frv/configure: Regenerate.
59 * h8300/configure: Regenerate.
60 * igen/configure: Regenerate.
61 * iq2000/configure: Regenerate.
62 * lm32/configure: Regenerate.
63 * m32c/configure: Regenerate.
64 * m32r/configure: Regenerate.
65 * m68hc11/configure: Regenerate.
66 * mcore/configure: Regenerate.
67 * microblaze/configure: Regenerate.
68 * mips/configure: Regenerate.
69 * mn10300/configure: Regenerate.
70 * moxie/configure: Regenerate.
71 * ppc/configure: Regenerate.
72 * rl78/configure: Regenerate.
73 * rx/configure: Regenerate.
74 * sh/configure: Regenerate.
75 * sh64/configure: Regenerate.
76 * testsuite/configure: Regenerate.
77 * v850/configure: Regenerate.
79 2012-11-05 Stephane Carrez <Stephane.Carrez@gmail.com>
81 * MAINTAINERS: Update my email address.
83 2012-09-24 Steve Ellcey <sellcey@mips.com>
85 * mips/basic.exp: Add mips*-mti-elf* target.
86 * configure.ac: Add mips*-mti-elf* target.
87 * configure: Regenerate.
89 2012-06-15 Joel Brobecker <brobecker@adacore.com>
91 * configure: Regenerate.
93 2012-06-06 Michael Eager <eager@eagercon.com>
95 * microblaze/interp.c (config.h): Add #include.
97 2011-11-29 Joel Brobecker <brobecker@adacore.com>
99 * MAINTAINERS (Global Maintainers): New section. Add Mike
102 2011-11-28 DJ Delorie <dj@redhat.com>
104 * configure.tgt: Add rl78 support.
105 * configure: Regenerate.
106 * rl78: New directory.
107 * MAINTAINERS: Add myself as RL78 maintainer.
109 2011-07-08 Hans-Peter Nilsson <hp@axis.com>
111 * MAINTAINERS: Remove Thiemo Seufer.
113 2011-06-04 Mike Frysinger <vapier@gentoo.org>
115 * configure.tgt (bfin-*-*): Add sim_testsuite=yes.
116 * configure: Regenerate.
118 2011-05-04 Joseph Myers <joseph@codesourcery.com>
120 * configure.tgt (thumb*-*-* | strongarm*-*-* | xscale-*-*): Don't
122 * configure: Regenerate.
124 2011-03-05 Mike Frysinger <vapier@gentoo.org>
126 * MAINTAINERS: Add bfin entry.
127 * configure.tgt (bfin-*-*): Handle bfin targets.
128 * configure: Regenerate.
130 2011-01-05 Mike Frysinger <vapier@gentoo.org>
132 * .gitignore: Add /*/hw-config.h.
134 2010-12-23 Mike Frysinger <vapier@gentoo.org>
136 * .gitignore: New file.
138 2010-07-28 DJ Delorie <dj@redhat.com>
140 * MAINTAINERS: Add self as RX maintainer. Sort list.
142 2010-06-08 Nick Clifton <nickc@redhat.com>
144 * reg.c (set_oszc): Use unsigned int for the mask.
145 (set_szc, set_osz, set_sz): Likewise.
147 2010-04-26 Mike Frysinger <vapier@gentoo.org>
149 * configure.ac: Target logic moved out to and included from ...
150 * configure.tgt: ... this new file.
151 * configure: Regenerated.
153 2010-04-12 Mike Frysinger <vapier@gentoo.org>
155 * README-HACKING: Add more sections.
157 2010-02-11 Doug Evans <dje@sebabeach.org>
159 * cris/cpuv10.h, * cris/cpuv32.h, * cris/cris-desc.c,
160 * cris/cris-desc.h, * cris/decodev10.c, * cris/decodev32.c,
161 * cris/modelv10.c, * cris/modelv32.c, * cris/semcrisv10f-switch.c,
162 * cris/semcrisv32f-switch.c: Regenerate.
164 2010-01-09 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
166 * avr/configure: Regenerate.
167 * cris/configure: Regenerate.
168 * microblaze/configure: Regenerate.
170 2010-01-02 Doug Evans <dje@sebabeach.org>
172 * cris/arch.c, * cris/arch.h, * cris/cpuall.h, * cris/cpuv10.c,
173 * cris/cpuv10.h, * cris/cpuv32.c, * cris/cpuv32.h, * cris/cris-desc.c,
174 * cris/cris-desc.h, * cris/cris-opc.h, * cris/decodev10.c,
175 * cris/decodev10.h, * cris/decodev32.c, * cris/decodev32.h,
176 * cris/modelv10.c, * cris/modelv32.c, * cris/semcrisv10f-switch.c,
177 * cris/semcrisv32f-switch.c: Regenerate, update copyright year.
179 2010-01-01 Doug Evans <dje@sebabeach.org>
181 * cris/mloop.in: Fix copyright year update snafu.
183 2009-11-24 Joel Brobecker <brobecker@adacore.com>
185 * common/aclocal.m4: Add include of ../../config/zlib.m4.
186 * common/common.m4: Use AM_ZLIB to check for zlib support.
187 * ppc/configure.ac: Likewise.
188 * arm/configure, avr/configure, common/configure, cr16/configure,
189 cris/configure, d10v/configure, erc32/configure, frv/configure,
190 h8300/configure, iq2000/configure, lm32/configure, m32c/configure,
191 m32r/configure, m68hc11/configure, mcore/configure,
192 microblaze/configure, mips/configure, mn10300/configure,
193 moxie/configure, ppc/configure, sh/configure, sh64/configure,
194 v850/configure: Regenerate.
196 2009-11-24 DJ Delorie <dj@redhat.com>
199 * configure.ac: Add entry for Renesas RX.
200 * configure: Regenerate.
202 2009-11-22 Doug Evans <dje@sebabeach.org>
204 * cris/cpuall.h: Regenerate.
205 * cris/cpuv10.h: Regenerate.
206 * cris/cpuv32.h: Regenerate.
207 * cris/decodev10.c: Regenerate.
208 * cris/decodev10.h: Regenerate.
209 * cris/decodev32.c: Regenerate.
210 * cris/decodev32.h: Regenerate.
212 2009-11-12 Tristan Gingold <gingold@adacore.com>
214 * avr/interp.c (sim_write): Allow byte access.
217 2009-11-12 Tristan Gingold <gingold@adacore.com>
219 * avr/interp.c (sim_load): Clear memory before loading.
221 2009-11-09 Tristan Gingold <gingold@adacore.com>
223 * avr/interp.c (sim_resume): Fix typo for OP_ret.
225 2009-10-23 Doug Evans <dje@sebabeach.org>
227 * cris/arch.c: Regenerate.
228 * cris/arch.h: Regenerate.
229 * cris/cpuall.h: Regenerate.
230 * cris/cpuv10.c: Regenerate.
231 * cris/cpuv10.h: Regenerate.
232 * cris/cpuv32.c: Regenerate.
233 * cris/cpuv32.h: Regenerate.
234 * cris/cris-desc.c: Regenerate.
235 * cris/cris-desc.h: Regenerate.
236 * cris/cris-opc.h: Regenerate.
237 * cris/decodev10.c: Regenerate.
238 * cris/decodev10.h: Regenerate.
239 * cris/decodev32.c: Regenerate.
240 * cris/decodev32.h: Regenerate.
241 * cris/modelv10.c: Regenerate.
242 * cris/modelv32.c: Regenerate.
243 * cris/semcrisv10f-switch.c: Regenerate.
244 * cris/semcrisv32f-switch.c: Regenerate.
246 2009-10-22 Tristan Gingold <gingold@adacore.com>
248 * avr/interp.c (sim_stop): Return 1.
250 2009-10-16 Doug Evans <dje@sebabeach.org>
252 * MAINTAINERS: Add myself as m32r maintainer.
254 2009-10-15 Michael Egaer <eager@eagercon.com>
256 * MAINTAINERS: Add self as MicroBlaze maintainer.
258 2009-10-14 Ben Elliston <bje@gnu.org>
260 * MAINTAINERS (common): Move myself to "past maintainers" section.
262 2009-10-06 Michael Eager <eager@eagercon.com>
264 * microblaze/interp.c: Add include microblaze-dis.h.
266 2009-09-23 Michael Eager <eager@eagercon.com>
268 * configure: Add microblaze-*.* (not regenerated).
269 * configure.ac: Likewise.
270 * microblaze/config.in: New.
271 * microblaze/configure: Generate.
272 * microblaze/configure.ac: New.
273 * microblaze/interp.c: New.
274 * microblaze/Makefile.in: New.
275 * microblaze/microblaze.h: New.
276 * microblaze/microblaze.isa: New.
277 * microblaze/sim-main.h: New.
278 * microblaze/sysdep.h: New.
280 2009-08-22 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
282 * avr/config.in: Regenerate.
283 * avr/configure: Likewise.
284 * configure: Likewise.
285 * cris/config.in: Likewise.
286 * cris/configure: Likewise.
288 * configure.ac: m4_include toplevel config/override.m4.
289 * configure: Regenerate.
290 * avr/configure: Regenerate.
291 * cris/configure: Regenerate.
293 2009-07-30 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
295 * Makefile.in (datarootdir): New variable.
297 2009-05-18 Jon Beniston <jon@beniston.com>
299 * MAINTAINERS: Add Jon Beniston as maintainer of lm32 sim.
300 * configure.ac: Add lm32 target.
301 * lm32: New directory.
303 2009-05-11 Andrew Cagney <cagney@gnu.org>
305 * MAINTAINERS: Orphan ppc.
307 2009-05-08 Kevin Buettner <kevinb@redhat.com>
309 * m32c/gdb-if.c (m32c_signal_to_host): Rename to
310 m32c_signal_to_target. Change signal return values from SIGILL,
311 SIGTRAP, SIGSEGV, etc. to TARGET_SIGNAL_ILL, TARGET_SIGNAL_TRAP,
312 TARGET_SIGNAL_SEGV, etc. Fix all callers.
314 2009-04-30 Anthony Green <green@moxielogic.com>
316 * MAINTAINERS: Add myself for the moxie port.
317 * moxie: New directory.
318 * configure.ac: Add entry for moxie.
319 * configure: Regenerate.
321 2009-04-27 Tristan Gingold <gingold@adacore.com>
323 * avr: New directory.
324 * avr/interp.c, avr/Makefile.in, avr/configure.ac: New files.
325 * avr/config.in: New file, generated by autoheader.
326 * avr/configure: New file generated by autoconf.
327 * configure.ac: Add avr.
328 * configure: Regenerated.
330 2009-04-17 Carlos O'Donell <carlos@codesourcery.com>
332 * Makefile.in: Add dummy install-pdf, html, and
333 install-html targets.
335 2009-01-18 Hans-Peter Nilsson <hp@axis.com>
337 * cris/sim-if.c: Include errno.h.
338 (cris_start_address, cris_program_offset): New variables.
339 (OPTION_CRIS_PROGRAM_OFFSET, OPTION_CRIS_STARTADDR): New option
341 (cris_options): New options --cris-program-offset and
342 --cris-start-address.
343 (cris_option_handler): Handle new options.
344 (cris_program_offset_write, cris_set_section_offset_iterator)
345 (cris_offset_sections, cris_offset_sections): New functions.
346 (sim_load): Use cris_program_offset_write as function argument to
347 cris_load_elf_file, not sim_write.
348 (struct offsetinfo): New struct.
349 (cris_handle_interpreter): Fix typo in comment.
350 (sim_open): Call cris_offset_sections as soon as the bfd of the
351 infile is available. Gate bfd validity checks on abfd non-NULL.
352 (sim_create_inferior): Let cris_start_address when != -1 override
353 other start-address choices.
355 2009-01-06 Hans-Peter Nilsson <hp@axis.com>
357 * cris/traps.c (abort): Define to call sim_io_error.
358 (create_map): Make -1 imply a non-fixed address, not 0. All
359 callers changed. Only prefer the next higher unmapped address if
360 the last mapped address is no less than 0x40000000. Check that
361 the address to be mapped is not already mapped. Update head
363 (unmap_pages): Don't call abort when recursive call fails, just
364 note and return an error if a page in the range couldn't be unmapped.
365 (cris_bmod_handler, h_supr_set_handler, h_supr_get_handler)
366 (schedule, make_first_thread, cris_pipe_empty): New local variable sd.
367 (cris_break_13_handler) <case TARGET_SYS_mmap2>: Handle
368 non-MAP_FIXED argument overlapping existing map. For MAP_FIXED,
369 don't abort on page not being mapped. Handle non-anon filemap
370 with length padded to pagesize.
372 2009-01-03 Hans-Peter Nilsson <hp@axis.com>
374 * cris/sim-if.c (TARGET_AT_NULL, TARGET_AT_PHDR, TARGET_AT_PHENT)
375 (TARGET_AT_PHNUM, TARGET_AT_PAGESZ, TARGET_AT_BASE)
376 (TARGET_AT_FLAGS, TARGET_AT_ENTRY, TARGET_AT_UID, TARGET_AT_EUID)
377 (TARGET_AT_GID, TARGET_AT_EGID, TARGET_AT_HWCAP)
378 (TARGET_AT_CLKTCK): Remove redundant macros.
379 (AUX_ENT): Adjust to use standard ELF AT_* macros.
380 (AUX_ENTF): Ditto. Remove always-0 middle argument. Update all
382 (sim_open): Also pass AT_SECURE.
384 * cris/sim-main.h (struct _sim_cpu): New member
385 set_target_thread_data.
386 * cris/crisv32f.c (CRIS_TLS_REGISTER): Define.
387 * cris/crisv10f.c: Ditto.
388 * cris/cris-tmpl.c (MY (set_target_thread_data)): New function.
389 (MY (f_specific_init)): Set new _sim_cpu member to new function.
390 * cris/traps.c (TARGET_SYS_set_thread_area): Define.
391 (cris_break_13_handler) <case TARGET_SYS_set_thread_area>: New
394 * cris/traps.c (TARGET_SYS_exit_group): Define.
395 (cris_break_13_handler): Handle it like the exit for the last
398 * cris/traps.c (TARGET_UTSNAME): Update to 2009-01-01.
399 (TARGET_EPOCH): Update to match TARGET_UTSNAME. Correct comment.
400 (cris_break_13_handler) <case TARGET_SYS_uname>: Update to
401 2.6.27. Set machine field to the BFD printable name of the
404 * cris/traps.c (TARGET_MAP_DENYWRITE): Define.
405 (cris_break_13_handler) <case TARGET_SYS_mmap2>: Handle
406 TARGET_MAP_DENYWRITE.
408 * cris/traps.c (TARGET_SYS_access, TARGET_R_OK, TARGET_W_OK)
409 (TARGET_X_OK, TARGET_F_OK): Define.
410 (cris_break_13_handler) <case TARGET_SYS_access>: New case.
412 * cris/semcrisv32f-switch.c: Regenerate.
414 2008-12-30 Hans-Peter Nilsson <hp@axis.com>
416 * cris/sim-if.c (sim_open): If sim_analyze_program fails, emit
417 just a short CRIS-specific notice. Tweak the wording for a
418 failing architecture test.
420 * cris/traps.c (TARGET_SYS_writev): New macro.
421 (is_mapped_only, cris_dump_map): New functions.
422 (cris_break_13_handler) <case TARGET_SYS_mmap2>: Handle more flags
423 and prot combinations and a non-zero page-offset. If
424 TARGET_MAP_FIXED, unmap pages before mapping them.
425 <case TARGET_SYS_mprotect>: When checking, allow any length
426 argument. Don't actually do anything.
427 <case TARGET_SYS_writev>: New case.
429 * cris/Makefile.in (SIM_OBJS): Remove sim-hload.o.
430 * cris/sim-if.c: Include elf-bfd.h.
431 (struct progbounds): New members end_loadmem, start_nonloadmem.
432 (xprintf, eprintf): New functions, copied from common/sim-load.c.
433 (cris_load_elf_file, sim_load, cris_get_progbounds): New functions.
434 (get_progbounds_iterator): Renamed from get_progbounds. Make
435 static. Update head comment. Set new struct progbounds members.
436 (exec_load_addr, interp_load_addr, interp_start_addr): New static
438 (aux_ent_phdr, aux_ent_phent, aux_ent_phnum, aux_ent_base)
439 (aux_ent_entry, cris_write_interp, cris_handle_interpreter): New
441 (sim_open): New constant array auxv_entries. Rewrite AUX_ENT
442 handling to use auxv_entries. Improve error message and checking
443 for invalid programs. Use new variable abfd for the program
444 instead of for each access reaching into sd to get it.
445 (sim_create_inferior): If non-zero, use interp_start_addr instead
446 of the program start address.
447 (cris_disassemble_insn): Remove incorrect and unclear, supposedly
448 stale comment. Always specify little-endian.
450 2008-07-29 Nick Clifton <nickc@redhat.com>
452 * common/genmloop.sh: Add new parameter: -shell to specify the
453 command interpreter to use to run the input file. This is
454 necessary because otherwise SHELL is taken from the user's
455 environment, and not from the makefile that invoked this script
456 and the user might not be running an sh-like shell.
457 * cris/Makefile.in: Pass -shell parameter to genmloop.sh.
458 * fr30/Makefile.in: Likewise.
459 * frv/Makefile.in: Likewise.
460 * i960/Makefile.in: Likewise.
461 * iq2000/Makefile.in: Likewise.
462 * m32r/Makefile.in: Likewise.
464 * frv/mloop.in: Add missing start of line comment marker.
466 2008-07-11 Hans-Peter Nilsson <hp@axis.com>
468 * cris/configure: Regenerate to track ../common/common.m4 changes.
469 * cris/config.in: Ditto.
471 2008-06-06 Vladimir Prus <vladimir@codesourcery.com>
472 Daniel Jacobowitz <dan@codesourcery.com>
473 Joseph Myers <joseph@codesourcery.com>
475 * cris/configure: Regenerate.
477 2008-05-09 Olivier Hainque <hainque@adacore.com>
479 * ppc/altivec.igen (vperm): Latch inputs into temporaries.
481 2008-03-25 M R Swami Reddy <MR.Swami.Reddy@nsc.com>
483 * MAINTAINERS: Add myself as maintainer of cr16 port.
485 2008-02-12 M Ranga Swami Reddy <MR.Swami.Reddy@nsc.com>
487 Add simulator for National cr16 processor.
488 * cr16: New directory.
489 * configure.ac: Add entry for National cr16.
490 * configure: Regenerate.
492 2008-02-05 DJ Delorie <dj@redhat.com>
494 * configure.ac (v850): V850 now has a testsuite.
495 * configure (v850): Likewise.
497 2008-01-01 Daniel Jacobowitz <dan@codesourcery.com>
499 Updated copyright notices for most files.
501 2007-12-19 DJ Delorie <dj@redhat.com>
503 * frv/frv.c (frvbf_cut): Only look at the six LSBs of
506 2007-10-22 Hans-Peter Nilsson <hp@axis.com>
508 * cris/arch.c, cris/arch.h, cris/cpuall.h, cris/cpuv10.c,
509 cris/cpuv10.h, cris/cpuv32.c, cris/cpuv32.h, cris/cris-desc.c,
510 cris/cris-desc.h, cris/cris-opc.h, cris/decodev10.c,
511 cris/decodev10.h, cris/decodev32.c, cris/decodev32.h,
512 cris/modelv10.c, cris/modelv32.c, cris/semcrisv10f-switch.c,
513 cris/semcrisv32f-switch.c: Regenerate.
515 2007-08-24 Joel Brobecker <brobecker@adacore.com>
517 Switch the license of all files explicitly copyright the FSF
520 2007-03-27 Brooks Moses <brooks.moses@codesourcery.com>
522 * Makefile.in: Add dummy "pdf" target.
524 2007-02-20 Hans-Peter Nilsson <hp@axis.com>
526 * cris/traps.c (dump_statistics): Change format for cycle numbers
527 to %llu and cast parameters to unsigned long long.
529 2007-02-16 Thiemo Seufer <ths@mips.com>
531 * Makefile.in (FLAGS_TO_PASS, TARGET_FLAGS_TO_PASS): Add RUNTEST.
533 2007-01-28 Manuel Lauss <slauss@resi.at>
535 * configure.ac (sh64-*-*): Change to sh64*-*-*.
536 (sh-*-*): Change to sh*-*-*.
537 * configure: Regenerated.
539 2007-01-09 Daniel Jacobowitz <dan@codesourcery.com>
541 Updated copyright notices for most files.
543 2006-12-20 Hans-Peter Nilsson <hp@axis.com>
545 * Makefile.in (autoconf-common autoheader-common): Only run
546 autoheader on subdirs with a file config.in.
548 * configure.ac (common): Make the default "yes" for all targets
550 * configure: Regenerate.
552 * Makefile.in (autoconf-common autoheader-common): In documented
553 usage, say SHELL=/bin/sh.
554 (.PHONY): Add autoheader-common.
556 * MAINTAINERS: Add self as authorized committer for *.
558 2006-10-02 Edgar E. Iglesias <edgar@axis.com>
559 Hans-Peter Nilsson <hp@axis.com>
561 * cris/cris-sim.h (enum cris_unknown_syscall_action_type)
562 (cris_unknown_syscall_action): Declare.
563 * cris/sim-if.c (cris_unknown_syscall_action): Define.
564 (cris_options): Add cris-unknown-syscall option.
565 (cris_option_handler): Correct comment about and error message for
566 invalid --cris-cycles argument. Handle --cris-unknown-syscall.
567 * cris/traps.c: Include stdarg.h
568 (cris_unknown_syscall): New function.
569 (cris_break_13_handler): Instead of sim_io_eprintf and
570 sim_engine_halt, call cris_unknown_syscall to handle more or less
571 unknown syscalls. Adjust code as necessary to handle return
574 2006-09-30 Daniel Jacobowitz <dan@codesourcery.com>
576 * MAINTAINERS: Add Dave Brolley for sh64.
578 2006-09-30 Hans-Peter Nilsson <hp@axis.com>
580 * cris/traps.c (TARGET_PIPE_BUF): New macro.
581 (cris_pipe_empty): Correct initialization of "remaining". Only
582 adjust the "write" return value if more than TARGET_PIPE_BUF bytes
585 2006-09-29 Hans-Peter Nilsson <hp@axis.com>
587 * cris/configure.ac: Check for limits.h and sys/param.h.
588 * cris/configure, cris/config.in: Rebuild.
589 * cris/traps.c (SIM_PATHMAX): New macro.
590 (cris_break_13_handler): Use SIM_PATHMAX, not MAXPATHLEN.
592 2006-08-08 Joel Sherrill <joel.sherrill@oarcorp.com>
594 * configure.ac (sparc-*-rtems*|sparc-*-elf*): Enable erc32 simulator.
595 * Makefile.in (FLAGS_TO_PASS): Include libdir.
596 * configure: Regenerated.
598 2006-06-05 Daniel Jacobowitz <dan@codesourcery.com>
600 * cris/configure: Regenerated.
602 2006-05-31 Daniel Jacobowitz <dan@codesourcery.com>
604 * cris/configure: Regenerated.
606 2006-05-05 Andreas Schwab <schwab@suse.de>
608 * configure.ac (CFLAGS_FOR_BUILD): Set and substitute.
609 * configure: Regenerate.
611 * Makefile.in (CFLAGS_FOR_BUILD): Define.
612 (CC_FOR_BUILD): Don't override.
613 (FLAGS_TO_PASS): Pass CFLAGS_FOR_BUILD.
615 2006-05-04 Daniel Jacobowitz <dan@codesourcery.com>
617 * MAINTAINERS: Add an "Authorized committers" section, and list
620 2006-04-08 Hans-Peter Nilsson <hp@axis.com>
622 * cris/crisv32f.c (MY (deliver_interrupt)): Set CCS to new_ccs.
624 2006-04-03 Hans-Peter Nilsson <hp@axis.com>
626 * cris/dv-cris.c, cris/dv-rv.c, cris/rvdummy.c: New files.
627 * cris/Makefile.in (CONFIG_DEVICES): Remove redundant setting.
628 (dv-cris.o, dv-rv.o rvdummy$(EXEEXT), rvdummy.o): New rules.
629 (all): Depend on rvdummy$(EXEEXT).
630 * cris/configure.ac: Call SIM_AC_OPTION_WARNINGS. Check for
631 sys/socket.h and sys/select.h. Call SIM_AC_OPTION_HARDWARE,
633 * cris/configure: Regenerate.
634 * cris/cris-sim.h (cris_have_900000xxif): Declare here.
635 (enum cris_interrupt_type, crisv10deliver_interrupt)
636 (crisv32deliver_interrupt: New declarations.
637 * cris/cris-tmpl.c [WITH_HW] (MY (f_model_insn_after)): Call
638 sim_events_tickn and set state-events member work_pending when it's
639 time for the next event.
640 [WITH_HW] (MY (f_specific_init)): Set CPU-model-specific
641 interrupt-delivery function.
642 * cris/crisv10f.c (MY (deliver_interrupt)): New function.
643 * cris/crisv32f.c (MY (deliver_interrupt)): New function.
644 * cris/devices.c: Include hw-device.h.
645 (device_io_read_buffer) [WITH_HW]: Call hw_io_read_buffer.
646 (device_io_write_buffer): Only perform 0x900000xx-functions if
647 cris_have_900000xxif is nonzero. Else if WITH_HW defined,
648 call hw_io_write_buffer. Add return 0 last in function.
649 * cris/sim-if.c (cris_have_900000xxif): Now global.
650 (sim_open) [WITH_HW]: Clear deliver_interrupt cpu member.
651 Force "-model" option, effectively.
652 * cris/sim-main.h (cris_interrupt_delivery_fn): New type.
653 (struct _sim_cpu) [WITH_HW]: New member deliver_interrupt.
655 2006-04-02 Hans-Peter Nilsson <hp@axis.com>
657 * cris/Makefile.in (CRISV10F_OBJS): Remove semcrisv10f-switch.o.
658 (CRISV32F_OBJS): Remove semcrisv32f-switch.o.
659 (semcrisv10f-switch.o, semcrisv32f-switch.o: Remove dependency rules.
661 2006-03-13 DJ Delorie <dj@redhat.com>
663 * MAINTAINERS: Add self as m32c sim maintainer.
665 2006-02-23 Hans-Peter Nilsson <hp@axis.com>
667 * cris/traps.c (syscall_map): Remove CB_SYS_time / TARGET_SYS_time
669 (cris_break_13_handler) <case TARGET_SYS_time>: New case.
671 2006-01-23 Jim Blandy <jimb@redhat.com>
673 Add simulator for Renesas M32C and M16C.
675 * m32c: New directory.
676 * configure.ac: Add entry for Renesas M32C.
677 * configure: Regenerate.
679 2006-01-10 Hans-Peter Nilsson <hp@axis.com>
681 * cris/cris-tmpl.c (MY (f_model_insn_before)): Only display basic
682 cycle count for the current insn.
684 2005-12-06 Hans-Peter Nilsson <hp@axis.com>
686 * cris/cpuv10.h, cris/cpuv32.h, cris/cris-desc.c, cris/cris-opc.h,
687 cris/decodev10.c, cris/decodev10.h, cris/decodev32.c,
688 cris/decodev32.h, cris/modelv10.c, cris/modelv32.c,
689 cris/semcrisv10f-switch.c, cris/semcrisv32f-switch.c: Regenerate.
691 2005-12-05 Hans-Peter Nilsson <hp@axis.com>
693 * cris/arch.c, cris/arch.h, cris/cpuall.h, cris/cpuv10.c,
694 cris/cpuv10.h, cris/cpuv32.c, cris/cpuv32.h, cris/cris-desc.c,
695 cris/cris-desc.h, cris/cris-opc.h, cris/decodev10.c,
696 cris/decodev10.h, cris/decodev32.c, cris/decodev32.h,
697 cris/modelv10.c, cris/modelv32.c, cris/semcrisv10f-switch.c,
698 cris/semcrisv32f-switch.c: Regenerate.
700 2005-11-20 Hans-Peter Nilsson <hp@axis.com>
702 * cris/traps.c (TARGET_O_RDONLY, TARGET_O_WRONLY): Define.
703 (open_map): Use TARGET_O_ACCMODE, TARGET_O_RDONLY and
705 (cris_break_13_handler) <case TARGET_SYS_fcntl>: Add support for
706 F_GETFL on fd 0, 1 and 2.
708 2005-11-17 Hans-Peter Nilsson <hp@axis.com>
710 * cris/sim-main.h (struct _sim_cpu): New members last_syscall,
711 last_open_fd, last_open_flags.
712 * cris/traps.c: Don't include targ-vals.h.
713 (TARGET_O_ACCMODE): Define.
714 (cris_break_13_handler): Set new _sim_cpu members.
715 <case TARGET_SYS_fcntl>: Support special case of F_GETFL.
716 Rearrange code as switch. Emit "unimplemented" abort for
717 unimplemented fcntl calls.
719 * cris/traps.c (TARGET_SYS_stat): Define.
720 (syscall_stat32_map): Add entry for TARGET_SYS_stat.
721 (cris_break_13_handler) <case TARGET_SYS_stat>: New case.
723 2005-11-16 Hans-Peter Nilsson <hp@axis.com>
725 * cris/cris-tmpl.c (MY (f_model_insn_before)): Make sure only the
726 low 32 bits are used after an unsigned long cast.
728 2005-05-28 Hans-Peter Nilsson <hp@axis.com>
730 * cris/Makefile.in (stamp-v32fmloop): Depend on stamp-v10fmloop.
732 2005-05-26 Chris Demetriou <cgd@netbsd.org>
734 * MAINTAINERS: Update my mail address, move myself to the
735 "Past maintainers" section.
737 2005-05-17 Corinna Vinschen <vinschen@redhat.com>
739 * configure.ac: Add igen to v850 build.
740 * configure: Regenerate.
742 2005-04-29 Paul Brook <paul@codesourcery.com>
744 * common/callback.c (PIPE_BUF): Provide default definition.
745 (os_lstat): Use stat if lstat is not available on the host.
746 (os_ftruncate): Return EINVAL if not available on the host.
747 (os_truncate): Ditto.
748 * common/configure.ac: Check for lstat, truncate and ftruncate.
749 * common/configure: Regenerate.
750 * common/config.in: Regenerate.
752 2005-04-27 Paul Brook <paul@codesourcery.com>
754 * common/Make-common.in: Add $(EXEEXT) to "run".
756 2005-04-18 Hans-Peter Nilsson <hp@axis.com>
758 * cris/traps.c (cris_break_13_handler) <case TARGET_SYS_mmap2>:
759 For ((len & 8191) != 0 && fd == (USI) -1), don't say this isn't
760 implemented. In call to create_map, pad length argument to 8k.
762 2005-04-15 Corinna Vinschen <vinschen@redhat.com>
764 * configure.ac: Add explicit sh64 case.
765 * configure: Regenerate.
767 2005-03-30 Paul Brook <paul@codesourcery.com>
769 * arm/wrapper.c: Provide SIGTRAP and SIGBUS.
771 2005-03-24 Hans-Peter Nilsson <hp@axis.com>
773 * cris/Makefile.in (stamp-v10fcpu, stamp-v32fcpu): Add kludge to
774 include cgen-ops.h in decodev10.c and decodev32.c.
775 * cris/sim-main.h: Don't include cgen-ops.h here.
776 * cris/arch.c, cris/arch.h, cris/cpuall.h, cris/cpuv10.c,
777 cris/cpuv10.h, cris/cpuv32.c, cris/cpuv32.h, cris/cris-desc.c,
778 cris/cris-desc.h, cris/cris-opc.h, cris/decodev10.c,
779 cris/decodev10.h, cris/decodev32.c, cris/decodev32.h,
780 cris/modelv10.c, cris/modelv32.c, cris/semcrisv10f-switch.c,
781 cris/semcrisv32f-switch.c: Regenerate.
783 * cris/traps.c (cris_break_13_handler) <case
784 TARGET_SYS_rt_sigaction>: Rename sa_handler, sa_flags,
785 sa_restorer, sa_mask_low, sa_mask_high to target_sa_handler etc.
787 2005-03-23 Mark Kettenis <kettenis@gnu.org>
789 * cris/configure: Regenerate.
791 2005-02-28 Jim Blandy <jimb@redhat.com>
793 * d10v/configure.ac, igen/configure.ac, m68hc11/configure.ac,
794 mips/configure.ac, mn10300/configure.ac, v850/configure.ac:
795 Regenerated, after change to common/aclocal.m4.
797 2005-02-18 Corinna Vinschen <vinschen@redhat.com>
799 * iq2000: New target subdirectory.
800 * configure.ac: Add iq2000 target.
801 * configure: Regenerate.
803 2005-01-29 Hans-Peter Nilsson <hp@axis.com>
805 * Makefile.in (all, clean mostlyclean, distclean maintainer-clean)
806 (realclean, install): Fail if subdir make failed.
808 2005-01-28 Hans-Peter Nilsson <hp@axis.com>
810 * cris: New directory, simulator for Axis Communications CRIS
811 including CRIS v32, CGEN-based.
812 * configure.ac: Add corresponding configury.
813 * configure: Regenerate.
815 2005-01-17 Andrew Cagney <cagney@gnu.org>
817 * configure.ac: For mips*-*-* and mn10300*-*-* configure the
818 common directory. Remove sparc*-*-* from list.
820 2005-01-11 Andrew Cagney <cagney@gnu.org>
822 * Makefile.in (autoconf-common autoheader-common): Add --force to
823 autoconf and autoheader.
824 (autoconf-common autoheader-common)
825 (autoconf-install autoheader-install): Check for configure.ac, not
827 * configure.ac: Delete AC_CONFIG_AUX_DIR.
828 * configure: Re-generate.
830 2005-01-07 Andrew Cagney <cagney@gnu.org>
832 * configure.ac: Replace configure.in. Requires autoconf 2.59 and
833 correctly calls AC_CONFIG_SUBDIRS.
834 * configure: Re-generate.
836 2004-12-01 Andrew Cagney <cagney@gnu.org>
838 * i960, h8500: Delete directory.
840 2004-11-12 Andrew Cagney <cagney@gnu.org>
842 * d30v, fr30, mn10200, z8k: Delete directory.
844 2004-03-10 Ben Elliston <bje@gnu.org>
846 * MAINTAINERS: Update my mail address.
848 2004-01-26 Chris Demetriou <cgd@broadcom.com>
850 * configure.in (mips*-*-*): Configure in testsuite.
851 * configure: Regenerate.
853 2003-10-08 Dave Brolley <brolley@redhat.com>
855 * configure.in: Move frv handling to alphabetically correct placement.
857 2003-09-03 Andreas Schwab <schwab@suse.de>
859 * Makefile.in (FLAGS_TO_PASS): Pass down $(bindir) and $(mandir).
861 2003-08-29 Dave Brolley <brolley@redhat.com>
863 * MAINTAINERS: Add myself as maintainer of the FRV port.
865 2003-08-20 Michael Snyder <msnyder@redhat.com>
866 Dave Brolley <brolley@redhat.com>
868 * frv/: New directory, simulator for the Fujitsu FRV.
869 * configure.in: Add frv configury.
870 * configure: Regenerate.
872 2003-08-10 Ben Elliston <bje@wasabisystems.com>
874 * MAINTAINERS: Update my mail address.
876 2003-08-09 Andrew Cagney <cagney@redhat.com>
878 * MAINTAINERS: Andrew Cagney (mips) and Geoff Keating (ppc) drop
879 maintenance. List igen and sh maintainers. Mention that target
880 and global maintainers pick up the slack.
882 2003-07-09 Michael Snyder <msnyder@redhat.com>
884 * configure.in: Add testsuite to extra_subdirs for sh.
885 * configure: Regenerate.
887 2003-01-23 Nick Clifton <nickc@redhat.com>
891 2002-04-02 Alexandre Oliva <aoliva@redhat.com>
893 * sh/gencode.c: Replace sh3e with sh2e except in fsqrt.
895 2002-08-24 Geoffrey Keating <geoffk@redhat.com>
897 * MAINTAINERS: Update my email address.
899 2002-07-17 Andrew Cagney <ac131313@redhat.com>
901 * w65/: Delete directory.
903 2002-07-16 Andrew Cagney <ac131313@redhat.com>
905 * configure.in (extra_subdirs): Mark fr30-*-* as obsolete.
906 * configure: Re-generate.
908 2002-07-13 Andrew Cagney <ac131313@redhat.com>
910 * configure.in (extra_subdirs): Mark d30v-*-* as obsolete.
911 * configure: Re-generate.
913 2002-06-16 Andrew Cagney <ac131313@redhat.com>
915 * Makefile.in (autoconf-changelog autoheader-changelog): Let name,
916 id, date and host to be overriden by NAME, ID, DATE and HOST
917 respectfully. Use ISO dates.
919 Thu Jun 6 12:34:13 2002 Andrew Cagney <cagney@redhat.com>
921 * Makefile.in (ChangeLog): New makefile variable.
922 * README-HACKING: Mention the ChangeLog makefile variable.
924 2002-06-01 Andrew Cagney <ac131313@redhat.com>
926 * tic80/: Delete directory.
928 2002-05-16 Stephane Carrez <stcarrez@nerim.fr>
930 * MAINTAINERS: Update my email address.
932 2002-03-06 Stephane Carrez <Stephane.Carrez@worldnet.fr>
934 * MAINTAINERS: Record self as maintainer of m68hc11 simulator.
936 2002-03-01 Frank Ch. Eigler <fche@redhat.com>
938 * MAINTAINERS: Record self as a co-maintainer of just common/.
940 2002-02-07 Nick Clifton <nickc@cambridge.redhat.com>
942 * MAINTAINERS: Point to GDB files describing overall maintaince
943 and check-in procedures.
945 2002-01-10 Nick Clifton <nickc@cambridge.redhat.com>
947 * MAINTAINERS: Add myself for ARM portions.
949 2001-10-19 Andrew Cagney <ac131313@redhat.com>
951 * configure.in: When Linux or NetBSD, enable PowerPC simulator.
952 * configure: Re-generate.
954 2001-02-16 Ben Elliston <bje@redhat.com>
956 * MAINTAINERS: Add myself for common portions.
958 2001-01-15 Chris Demetriou <cgd@broadcom.com>
960 * MAINTAINERS: Added self and Andrew for the mips sim.
962 2000-10-25 Geoff Keating <geoffk@cygnus.com>
964 * MAINTAINERS: Added self and Andrew for the ppc sim.
966 Thu Jul 27 21:26:26 2000 Andrew Cagney <cagney@b1.cygnus.com>
968 From Stephane Carrez <Stephane.Carrez@worldnet.fr>:
969 * m68hc11: New directory.
971 * configure: Regenerate.
973 Tue Jul 4 13:43:54 2000 Andrew Cagney <cagney@b1.cygnus.com>
975 * tic80: New directory.
976 * configure.in: Add configury.
977 * configure: Regenerate.
979 2000-04-20 Nick Clifton <nickc@cygnus.com>
981 * configure.in (extra_subdirs): Add testsuite to strongarm
983 * configure: Regenerate.
985 Sat Mar 4 16:48:54 2000 Andrew Cagney <cagney@b1.cygnus.com>
987 * MAINTAINERS: New file. Blank.
989 1999-11-18 Ben Elliston <bje@cygnus.com>
991 * configure.in: Require autoconf 2.13 and remove obsolete
992 invocation of AC_C_CROSS.
993 * configure: Regenerate.
995 1999-09-29 Doug Evans <devans@casey.cygnus.com>
997 * configure.in: Configure the testsuite directory for thumb.
998 * configure: Regenerate.
1000 1999-07-16 Ben Elliston <bje@cygnus.com>
1002 * configure.in: Configure the testsuite directory for arm.
1003 * configure: Regenerate.
1005 1999-04-08 Nick Clifton <nickc@cygnus.com>
1007 * configure.in: Add support for MCore target.
1008 * configure: Regenerate.
1010 1999-03-14 Stan Shebs <shebs@andros.cygnus.com>
1012 * Makefile.in (FLAGS_TO_PASS, TARGET_FLAGS_TO_PASS): Remove
1013 RUNTEST instead of commenting out, fixes portability problem.
1015 1999-02-08 Nick Clifton <nickc@cygnus.com>
1017 * configure.in: Add support for StrongARM target.
1018 * configure: Regenerate.
1020 1999-01-04 Jason Molenda (jsm@bugshack.cygnus.com)
1022 * configure.in: Require autoconf 2.12.1 or higher.
1024 1998-12-08 James E Wilson <wilson@wilson-pc.cygnus.com>
1026 * configure.in (i960-*-*): Add.
1027 * configure: Rebuild.
1029 Wed Nov 4 19:11:43 1998 Dave Brolley <brolley@cygnus.com>
1031 * configure.in: Added case for fr30-*-*.
1032 * configure: Regenerated.
1034 Fri Sep 25 10:12:19 1998 Christopher Faylor <cgf@cygnus.com>
1036 * ppc/Makefile.in: Add EXEEXT to installed powerpc-eabi-run program
1037 to allow successful operation on Windows.
1039 Thu May 28 14:59:46 1998 Jillian Ye <jillian@cygnus.com>
1041 * Makefile.in: Take RUNTEST out of FLAGS_TO_PASS so that make
1042 check can be invoked recursively.
1044 Wed Apr 29 12:38:53 1998 Mark Alexander <marka@cygnus.com>
1046 * configure.in: Build simulator on sparclite and sparc86x targets.
1047 * configure: Regenerate.
1049 Sun Apr 26 15:21:01 1998 Tom Tromey <tromey@cygnus.com>
1051 * Makefile.in (autoconf-common autoheader-common): Don't pass -l
1052 to autoconf and autoheader.
1054 Fri Apr 24 11:14:13 1998 Tom Tromey <tromey@cygnus.com>
1056 * Makefile.in (autoconf-common autoheader-common): Pass `-l
1057 ../common' to autoconf and autoheader. Unconditionally run
1058 autoconf in every subdir.
1059 (autoconf-changelog autoheader-changelog): Unconditionally run
1060 commands in every subdir.
1061 (autoconf-install autoheader-install): Likewise.
1063 Tue Mar 24 17:12:43 1998 Stu Grossman <grossman@bhuna.cygnus.co.uk>
1065 * Makefile.in: Get SHELL from configure.
1066 * (FLAGS_TO_PASS): Pass down SHELL.
1067 * configure: Regenerate with autoconf 2.12.1 to fix shell issues for
1070 Tue Mar 24 11::18:00 1998 Joyce Janczyn <janczyn@cygnus.com>
1072 * configure.in (extra_subdirs): Enable igen for mn10300.
1073 * configure: Re-generate.
1075 Tue Dec 2 10:10:42 1997 Nick Clifton <nickc@cygnus.com>
1077 * configure.in (extra_subdirs): Add support for thumb target.
1079 * configure (extra_subdirs): Add support for thumb target.
1081 Wed Oct 8 12:38:48 1997 Andrew Cagney <cagney@b1.cygnus.com>
1083 * configure.in (extra_subdirs): Add IGEN directory when MIPS
1085 * configure: Regenerate.
1087 Fri Sep 12 13:10:31 1997 Andrew Cagney <cagney@b1.cygnus.com>
1089 * configure.in (extra_subdirs): v850ea needs igen.
1090 * configure: Re-generate.
1092 Mon Sep 1 16:48:23 1997 Andrew Cagney <cagney@b1.cygnus.com>
1094 * configure.in (testdir): When a testsuite directory, add that to
1095 the list of confdirs.
1097 Tue Aug 19 11:17:46 1997 Andrew Cagney <cagney@b1.cygnus.com>
1099 * configure.in (extra_subdirs): Enable igen ready for V850.
1101 Tue Aug 26 15:14:48 1997 Andrew Cagney <cagney@b1.cygnus.com>
1103 * configure.in (w65-*-*, only_if_enabled): Set.
1104 * configure: Re-generate.
1106 Mon Aug 25 16:26:53 1997 Andrew Cagney <cagney@b1.cygnus.com>
1108 * configure.in (sparc*-*-*, only_if_enabled): Set
1109 only_if_enabled=yes. Check only_if_enabled before enabling a
1111 * configure: Regenerate.
1113 Mon Aug 18 10:56:59 1997 Nick Clifton <nickc@cygnus.com>
1115 * configure.in (extra_subdirs): Add v850e target.
1117 Mon Aug 18 10:56:59 1997 Nick Clifton <nickc@cygnus.com>
1119 * configure.in (extra_subdirs): Add v850ea target.
1121 Fri Jul 25 11:40:47 1997 Doug Evans <dje@canuck.cygnus.com>
1123 * configure.in (sparc*-*-*): Don't build erc32.
1124 * configure: Regenerate.
1126 Thu Apr 24 00:47:20 1997 Doug Evans <dje@canuck.cygnus.com>
1128 * configure.in (m32r-*-*): New target.
1129 * configure: Regenerate.
1131 * Makefile.in (autoconf-common, autoconf-changelog): Change $* to $@.
1133 Mon Apr 21 22:57:55 1997 Andrew Cagney <cagney@b1.cygnus.com>
1135 * Makefile.in (.NOEXPORT, MAKEOVERRIDES): Moved to end, BSD make
1136 thought that .NOEXPORT was the default target.
1138 Fri Apr 11 17:18:07 1997 Ian Lance Taylor <ian@cygnus.com>
1140 * Makefile.in (clean mostlyclean): Restore targets accidentally
1141 deleted in earlier change.
1143 Thu Apr 3 12:20:32 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
1145 * Makefile.in (autoheader-common, autoheader-changelog,
1146 autoheader-install): Perform autoheader in addition to autoconf.
1148 Wed Apr 2 15:09:05 1997 Doug Evans <dje@canuck.cygnus.com>
1150 * Makefile.in (autoconf-install): New target.
1151 (autoconf-changelog): Try different way to obtain user name.
1153 Wed Apr 2 14:25:52 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
1155 * Makefile.in (autoconf-changelog): New target, update
1156 ChangeLog for all subdirectories - normally used after
1157 autoconf-common target.
1159 Wed Mar 19 14:26:21 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
1161 * configure.in (extra_subdirs): Include testsuite for d30v.
1162 * configure: Regenerate.
1164 * Makefile.in (RUNTEST, RUNTESTFLAGS): Borrow test rules from
1166 (check): New rules - drive the testsuite.
1168 Mon Mar 3 13:01:00 1997 Jeffrey A Law (law@cygnus.com)
1170 * configure.in: Add mn10200 configure lines accidentally
1172 * configure: Regenerated.
1174 Wed Feb 19 10:34:20 1997 Andrew Cagney <cagney@critters.cygnus.com>
1176 * configure.in (extra_subdirs): Generalize common sub directory
1178 (extra_subdirs): For d30v add igen to the list to be built.
1180 Sun Feb 16 16:37:47 1997 Andrew Cagney <cagney@critters.cygnus.com>
1182 * configure.in (d30v): New target.
1183 * configure: Regenerated.
1185 Wed Feb 19 23:17:13 1997 Jeffrey A Law (law@cygnus.com)
1187 * configure.in: Don't require GCC to build the mn10200
1189 * configure: Rebuilt.
1191 Wed Feb 5 13:28:13 1997 Doug Evans <dje@canuck.cygnus.com>
1193 * configure.in: Don't configure any subdirs if no simulator
1194 is being built. Don't use erc32 for sparc64.
1195 * configure: Regenerated.
1197 Tue Feb 4 13:19:39 1997 Doug Evans <dje@canuck.cygnus.com>
1199 * Makefile.in (autoconf-common): New target.
1200 * configure.in: Do configure common.
1201 * configure: Regenerated.
1203 Thu Jan 23 13:59:52 1997 Stu Grossman (grossman@critters.cygnus.com)
1205 * configure configure.in: Don't configure common anymore. Files
1206 from common are now built in the individual simualtor directories.
1207 This fixes problems with the WinGDB build procedure.
1209 Mon Jan 13 13:16:42 1997 Jeffrey A Law (law@cygnus.com)
1211 * configure: Enable the mn10200 simulator.
1213 Wed Nov 20 01:00:36 1996 Doug Evans <dje@canuck.cygnus.com>
1215 * configure.in (configdirs): Add common.
1216 * configure: Regenerated.
1218 Fri Nov 1 08:03:30 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1220 * configure.in (powerpc*-*-linux*): Treat like the other powerpc
1221 system V based targets.
1222 * configure: Regenerate.
1224 Thu Oct 17 12:50:08 1996 Doug Evans <dje@canuck.cygnus.com>
1226 * configure.in (--enable-sim-powerpc): Delete.
1227 (--enable-sim): Add.
1228 * configure: Regenerated.
1230 Fri Oct 11 21:13:43 1996 Jeffrey A Law (law@cygnus.com)
1232 * configure.in: Only build the V850 simulator if
1234 * configure: Rebuild.
1236 Sun Sep 8 17:22:50 1996 Ian Lance Taylor <ian@cygnus.com>
1238 * configure.in: Do build erc32 for DOS and Windows hosts.
1239 * configure: Rebuild.
1241 Wed Sep 4 18:11:27 1996 Stu Grossman (grossman@critters.cygnus.com)
1243 * Makefile.in erc32/Makefile.in: Don't set srcroot. This should
1244 be inherited from the parent. Remove INSTALL_XFORM and
1245 INSTALL_XFORM1. Make INSTALL be set from configure.
1247 Wed Sep 4 15:49:16 1996 Ian Lance Taylor <ian@cygnus.com>
1249 * configure.in: Only build the MIPS simulator if we are using
1251 * configure: Rebuild.
1253 Wed Aug 28 19:05:23 1996 Jeffrey A Law (law@cygnus.com)
1255 * configure.in (v850-*-*): Added V850 simulator.
1257 Thu Aug 1 17:08:41 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1259 * configure.in (d10v-*-*): Added D10V simulator.
1261 Wed Jun 26 12:33:57 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
1263 * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir,
1264 INSTALL_PROGRAM, INSTALL_DATA): Use autoconf-set values.
1266 * configure.in (AC_PREREQ): autoconf 2.5 or higher.
1267 (AC_PROG_INSTALL): Added.
1268 * configure: Rebuilt.
1270 Mon Jun 24 14:18:26 1996 Ian Lance Taylor <ian@cygnus.com>
1272 * configure.in: Only configure erc32 if using gcc.
1273 * configure: Rebuild.
1275 Tue Jun 4 09:24:21 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1277 * configure.in (sim_target): Build PowerPC simulator for powerpc
1278 System V.4, Solaris, and Elf targets.
1279 * configure: Regenerate with autoconf 2.10.
1281 Wed May 22 12:10:49 1996 Rob Savoye <rob@chinadoll>
1283 * configure.in: Only built erc32 simulator on Unix hosts as it
1285 * configure: Regenerated with autoconf 2.8.
1287 Sun May 19 20:20:40 1996 Rob Savoye <rob@chinadoll.cygnus.com>
1289 * erc32: Sparc simulator from the ESA.
1291 Sun Apr 7 21:00:09 1996 Fred Fish <fnf@cygnus.com>
1293 From: Miles Bader <miles@gnu.ai.mit.edu>
1294 * configure.in: Use AC_CHECK_TOOL to find AR & RANLIB.
1295 * configure: Regenerate using autoconf.
1297 Thu Feb 22 11:31:50 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1299 * Makefile.in (install): Fix typo.
1301 Wed Feb 21 11:59:57 1996 Ian Lance Taylor <ian@cygnus.com>
1303 * configure: Regenerate with autoconf 2.7.
1305 * Makefile.in (all): Simplify.
1306 (clean, mostlyclean): SUBDIRS may contain whitespace; fix the loop
1307 as in the all target.
1308 (distclean, maintainer-clean, realclean): Likewise.
1309 (install): Likewise.
1311 Thu Feb 15 18:37:00 1996 Fred Fish <fnf@cygnus.com>
1313 * Makefile.in (all): Remove extra '\' char from shell script.
1315 Wed Feb 14 16:43:59 1996 Mike Meissner <meissner@tiktok.cygnus.com>
1317 * Makefile.in (all): Avoid a for loop with zero elements, even if
1318 the loop will not be executed because of an if statement.
1320 Wed Jan 31 21:48:34 1996 Fred Fish <fnf@cygnus.com>
1322 * Makefile.in (install): Add missing semicolon in "fi \".
1324 Thu Nov 9 16:10:56 1995 Michael Meissner <meissner@tiktok.cygnus.com>
1326 * Makefile.in (AR, CC, CFLAGS, CC_FOR_BUILD, RANLIB): Pick up
1327 defaults from configure.
1329 * configure.in: Pick up AR, CC, CFLAGS, CC_FOR_BUILD, RANLIB using
1331 (powerpc*-*-eabi*): Build simulator for all powerpc eabi targets
1332 if either --enable-sim-powerpc is used, or the host compiler is
1335 Wed Nov 8 15:46:49 1995 James G. Smith <jsmith@pasanda.cygnus.co.uk>
1337 * configure.in (mips*-*-*): Added "mips" simulator target.
1338 * configure: Re-generated.
1340 Tue Oct 10 11:08:20 1995 Fred Fish <fnf@cygnus.com>
1342 * Makefile.in (BISON): Remove macro.
1343 (FLAGS_TO_PASS): Remove BISON.
1345 Sun Oct 8 04:26:27 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1347 * configure.in: Explicitly `exit 0' for broken shells.
1348 * configure: Rebuilt.
1350 Fri Oct 6 12:03:27 1995 Jim Wilson <wilson@chestnut.cygnus.com>
1352 * common/run.c (main): Initialize the callbacks.
1354 Wed Sep 20 13:34:50 1995 Ian Lance Taylor <ian@cygnus.com>
1356 * Makefile.in (maintainer-clean): New synonym for realclean.
1358 Fri Aug 25 11:53:43 1995 Michael Meissner <meissner@tiktok.cygnus.com>
1360 * configure.in (powerpc*-*-eabisim*): Only build the simulator if
1361 the target is powerpc*-*-eabisim*, since it requires GCC to build.
1363 Mon Aug 21 17:53:48 1995 Michael Meissner <meissner@tiktok.cygnus.com>
1365 * configure.in (powerpc{,le}-*-*): Add psim from Andrew Cagney
1366 <cagney@highland.com.au>.
1367 * configure: Regnerate from configure.in.
1369 Thu Aug 3 10:45:37 1995 Fred Fish <fnf@cygnus.com>
1371 * Update all FSF addresses except those in COPYING* files.
1373 Thu Jul 20 15:17:29 1995 Fred Fish <fnf@cygnus.com>
1375 * Makefile.in (CC_FOR_BUILD): Define default and arrange to pass
1376 submakes either default or passed in value.
1378 Wed Jul 5 14:32:54 1995 J.T. Conklin <jtc@rtl.cygnus.com>
1380 * Makefile.in (all, clean, distclean, mostlyclean, realclean,
1381 install): Changed targets so that they descend all
1382 subdirectories in $(SUBDIRS).
1383 (*-all, *-clean, *-install): Removed targets.
1385 * configure.in: Don't bother with target makefile fragments, they
1386 are no longer needed.
1387 * configure: regenerated.
1389 * Makefile.in, configure.in: converted to autoconf.
1390 * configure: New file, generated with autconf 2.4.
1392 Wed May 24 14:48:46 1995 Steve Chamberlain <sac@slash.cygnus.com>
1394 * Makefile.in: Support ARM.
1395 * configure.in: Ditto.
1397 Sun Jan 15 16:53:47 1995 Steve Chamberlain <sac@splat>
1399 * Makefile.in: Support W65.
1400 * configure.in: Ditto.
1402 Sun Mar 13 09:27:50 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
1404 * Makefile.in: Add TAGS target.
1406 Mon Sep 13 12:47:15 1993 K. Richard Pixley (rich@sendai.cygnus.com)
1408 * Makefile.in (all-z8k, install-z8k, clean-z8k, all-h8300,
1409 install-h8300, clean-h8300, all-h8500, install-h8500,
1410 clean-h8500, all-sh, install-sh, clean-sh): do not echo
1413 Wed Jun 30 14:12:05 1993 david d `zoo' zuhn (zoo at poseidon.cygnus.com)
1415 * Makefile.in: remove endian.h trace from h8500
1417 Sun Jun 13 13:08:58 1993 Jim Kingdon (kingdon@cygnus.com)
1419 * Makefile.in: Add distclean, realclean, and mostlyclean targets.
1421 Fri May 21 11:21:16 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
1423 * Makefile.in: make all of the all-* target (except all-nothing)
1424 depend on endian.h, so that if we're not building a simulator, we
1427 Fri May 21 10:55:06 1993 Ian Lance Taylor (ian@cygnus.com)
1429 * Makefile.in (check, installcheck): Added dummy targets.
1431 Mon May 3 21:39:43 1993 Fred Fish (fnf@cygnus.com)
1433 * Makefile.in (endian): Find endian.c in $(srcdir), and also
1434 explicitly make it, since some makes apparently don't work with
1435 VPATH and .c to executable rules (SunOS make for example).
1437 Mon May 3 08:29:01 1993 Steve Chamberlain (sac@thepub.cygnus.com)
1439 * Makefile.in (endian): Add explicit rule for broken makes.
1441 Mon Mar 15 15:47:53 1993 Ian Lance Taylor (ian@cygnus.com)
1443 * Makefile.in (info, install-info): New targets.
1444 (DO_INSTALL): Renamed from INSTALL, which is overridden by the top
1447 Wed Feb 10 20:12:27 1993 K. Richard Pixley (rich@ok.cygnus.com)
1449 * Makefile.in (endian.h): build endian.h via a temporary file so
1450 that we don't leave an incomplete file lying around on
1452 (clean): remove endian, e.h, and endian.h.
1454 Mon Feb 8 11:46:06 1993 Steve Chamberlain (sac@thepub.cygnus.com)
1456 * Makefile.in, configure.in: if target isn't supported, build a