sim/ChangeLog

   1 2010-04-26  Mike Frysinger  <vapier@gentoo.org>
   2
   3         * configure.ac: Target logic moved out to and included from ...
   4         * configure.tgt: ... this new file.
   5         * configure: Regenerated.
   6
   7 2010-04-12  Mike Frysinger  <vapier@gentoo.org>
   8
   9         * README-HACKING: Add more sections.
  10
  11 2010-02-11  Doug Evans  <dje@sebabeach.org>
  12
  13         * cris/cpuv10.h, * cris/cpuv32.h, * cris/cris-desc.c,
  14         * cris/cris-desc.h, * cris/decodev10.c, * cris/decodev32.c,
  15         * cris/modelv10.c, * cris/modelv32.c, * cris/semcrisv10f-switch.c,
  16         * cris/semcrisv32f-switch.c: Regenerate.
  17
  18 2010-01-09  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
  19
  20         * avr/configure: Regenerate.
  21         * cris/configure: Regenerate.
  22         * microblaze/configure: Regenerate.
  23
  24 2010-01-02  Doug Evans  <dje@sebabeach.org>
  25
  26         * cris/arch.c, * cris/arch.h, * cris/cpuall.h, * cris/cpuv10.c,
  27         * cris/cpuv10.h, * cris/cpuv32.c, * cris/cpuv32.h, * cris/cris-desc.c,
  28         * cris/cris-desc.h, * cris/cris-opc.h, * cris/decodev10.c,
  29         * cris/decodev10.h, * cris/decodev32.c, * cris/decodev32.h,
  30         * cris/modelv10.c, * cris/modelv32.c, * cris/semcrisv10f-switch.c,
  31         * cris/semcrisv32f-switch.c: Regenerate, update copyright year.
  32
  33 2010-01-01  Doug Evans  <dje@sebabeach.org>
  34
  35         * cris/mloop.in: Fix copyright year update snafu.
  36
  37 2009-11-24  Joel Brobecker  <brobecker@adacore.com>
  38
  39         * common/aclocal.m4: Add include of ../../config/zlib.m4.
  40         * common/common.m4: Use AM_ZLIB to check for zlib support.
  41         * ppc/configure.ac: Likewise.
  42         * arm/configure, avr/configure, common/configure, cr16/configure,
  43         cris/configure, d10v/configure, erc32/configure, frv/configure,
  44         h8300/configure, iq2000/configure, lm32/configure, m32c/configure,
  45         m32r/configure, m68hc11/configure, mcore/configure,
  46         microblaze/configure, mips/configure, mn10300/configure,
  47         moxie/configure, ppc/configure, sh/configure, sh64/configure,
  48         v850/configure: Regenerate.
  49
  50 2009-11-24  DJ Delorie  <dj@redhat.com>
  51
  52         * rx: New directory.
  53         * configure.ac: Add entry for Renesas RX.
  54         * configure: Regenerate.
  55
  56 2009-11-22  Doug Evans  <dje@sebabeach.org>
  57
  58         * cris/cpuall.h: Regenerate.
  59         * cris/cpuv10.h: Regenerate.
  60         * cris/cpuv32.h: Regenerate.
  61         * cris/decodev10.c: Regenerate.
  62         * cris/decodev10.h: Regenerate.
  63         * cris/decodev32.c: Regenerate.
  64         * cris/decodev32.h: Regenerate.
  65
  66 2009-11-12  Tristan Gingold  <gingold@adacore.com>
  67
  68         * avr/interp.c (sim_write): Allow byte access.
  69         (sim_read): Ditto.
  70
  71 2009-11-12  Tristan Gingold  <gingold@adacore.com>
  72
  73         * avr/interp.c (sim_load): Clear memory before loading.
  74
  75 2009-11-09  Tristan Gingold  <gingold@adacore.com>
  76
  77         * avr/interp.c (sim_resume): Fix typo for OP_ret.
  78
  79 2009-10-23  Doug Evans  <dje@sebabeach.org>
  80
  81         * cris/arch.c: Regenerate.
  82         * cris/arch.h: Regenerate.
  83         * cris/cpuall.h: Regenerate.
  84         * cris/cpuv10.c: Regenerate.
  85         * cris/cpuv10.h: Regenerate.
  86         * cris/cpuv32.c: Regenerate.
  87         * cris/cpuv32.h: Regenerate.
  88         * cris/cris-desc.c: Regenerate.
  89         * cris/cris-desc.h: Regenerate.
  90         * cris/cris-opc.h: Regenerate.
  91         * cris/decodev10.c: Regenerate.
  92         * cris/decodev10.h: Regenerate.
  93         * cris/decodev32.c: Regenerate.
  94         * cris/decodev32.h: Regenerate.
  95         * cris/modelv10.c: Regenerate.
  96         * cris/modelv32.c: Regenerate.
  97         * cris/semcrisv10f-switch.c: Regenerate.
  98         * cris/semcrisv32f-switch.c: Regenerate.
  99
 100 2009-10-22  Tristan Gingold  <gingold@adacore.com>
 101
 102         * avr/interp.c (sim_stop): Return 1.
 103
 104 2009-10-16  Doug Evans  <dje@sebabeach.org>
 105
 106         * MAINTAINERS: Add myself as m32r maintainer.
 107
 108 2009-10-15  Michael Egaer  <eager@eagercon.com>
 109
 110         * MAINTAINERS: Add self as MicroBlaze maintainer.
 111
 112 2009-10-14  Ben Elliston  <bje@gnu.org>
 113
 114         * MAINTAINERS (common): Move myself to "past maintainers" section.
 115
 116 2009-10-06  Michael Eager  <eager@eagercon.com>
 117
 118         * microblaze/interp.c: Add include microblaze-dis.h.
 119
 120 2009-09-23  Michael Eager  <eager@eagercon.com>
 121
 122         * configure: Add microblaze-*.* (not regenerated).
 123         * configure.ac: Likewise.
 124         * microblaze/config.in: New.
 125         * microblaze/configure: Generate.
 126         * microblaze/configure.ac: New.
 127         * microblaze/interp.c: New.
 128         * microblaze/Makefile.in: New.
 129         * microblaze/microblaze.h: New.
 130         * microblaze/microblaze.isa: New.
 131         * microblaze/sim-main.h: New.
 132         * microblaze/sysdep.h: New.
 133
 134 2009-08-22  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
 135
 136         * avr/config.in: Regenerate.
 137         * avr/configure: Likewise.
 138         * configure: Likewise.
 139         * cris/config.in: Likewise.
 140         * cris/configure: Likewise.
 141
 142         * configure.ac: m4_include toplevel config/override.m4.
 143         * configure: Regenerate.
 144         * avr/configure: Regenerate.
 145         * cris/configure: Regenerate.
 146
 147 2009-07-30  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
 148
 149         * Makefile.in (datarootdir): New variable.
 150
 151 2009-05-18  Jon Beniston <jon@beniston.com>
 152
 153         * MAINTAINERS: Add Jon Beniston as maintainer of lm32 sim.
 154         * configure.ac: Add lm32 target.
 155         * lm32: New directory.
 156
 157 2009-05-11  Andrew Cagney  <cagney@gnu.org>
 158
 159         * MAINTAINERS: Orphan ppc.
 160
 161 2009-05-08  Kevin Buettner  <kevinb@redhat.com>
 162
 163         * m32c/gdb-if.c (m32c_signal_to_host): Rename to
 164         m32c_signal_to_target.  Change signal return values from SIGILL,
 165         SIGTRAP, SIGSEGV, etc. to TARGET_SIGNAL_ILL, TARGET_SIGNAL_TRAP,
 166         TARGET_SIGNAL_SEGV, etc.  Fix all callers.
 167
 168 2009-04-30  Anthony Green  <green@moxielogic.com>
 169
 170         * MAINTAINERS: Add myself for the moxie port.
 171         * moxie: New directory.
 172         * configure.ac: Add entry for moxie.
 173         * configure: Regenerate.
 174
 175 2009-04-27  Tristan Gingold  <gingold@adacore.com>
 176
 177         * avr: New directory.
 178         * avr/interp.c, avr/Makefile.in, avr/configure.ac: New files.
 179         * avr/config.in: New file, generated by autoheader.
 180         * avr/configure: New file generated by autoconf.
 181         * configure.ac: Add avr.
 182         * configure: Regenerated.
 183
 184 2009-04-17  Carlos O'Donell  <carlos@codesourcery.com>
 185
 186         * Makefile.in: Add dummy install-pdf, html, and
 187         install-html targets.
 188
 189 2009-01-18  Hans-Peter Nilsson  <hp@axis.com>
 190
 191         * cris/sim-if.c: Include errno.h.
 192         (cris_start_address, cris_program_offset): New variables.
 193         (OPTION_CRIS_PROGRAM_OFFSET, OPTION_CRIS_STARTADDR): New option
 194         enums.
 195         (cris_options): New options --cris-program-offset and
 196         --cris-start-address.
 197         (cris_option_handler): Handle new options.
 198         (cris_program_offset_write, cris_set_section_offset_iterator)
 199         (cris_offset_sections, cris_offset_sections): New functions.
 200         (sim_load): Use cris_program_offset_write as function argument to
 201         cris_load_elf_file, not sim_write.
 202         (struct offsetinfo): New struct.
 203         (cris_handle_interpreter): Fix typo in comment.
 204         (sim_open): Call cris_offset_sections as soon as the bfd of the
 205         infile is available.  Gate bfd validity checks on abfd non-NULL.
 206         (sim_create_inferior): Let cris_start_address when != -1 override
 207         other start-address choices.
 208
 209 2009-01-06  Hans-Peter Nilsson  <hp@axis.com>
 210
 211         * cris/traps.c (abort): Define to call sim_io_error.
 212         (create_map): Make -1 imply a non-fixed address, not 0.  All
 213         callers changed.  Only prefer the next higher unmapped address if
 214         the last mapped address is no less than 0x40000000.  Check that
 215         the address to be mapped is not already mapped.  Update head
 216         comment.
 217         (unmap_pages): Don't call abort when recursive call fails, just
 218         note and return an error if a page in the range couldn't be unmapped.
 219         (cris_bmod_handler, h_supr_set_handler, h_supr_get_handler)
 220         (schedule, make_first_thread, cris_pipe_empty): New local variable sd.
 221         (cris_break_13_handler) <case TARGET_SYS_mmap2>: Handle
 222         non-MAP_FIXED argument overlapping existing map.  For MAP_FIXED,
 223         don't abort on page not being mapped.  Handle non-anon filemap
 224         with length padded to pagesize.
 225
 226 2009-01-03  Hans-Peter Nilsson  <hp@axis.com>
 227
 228         * cris/sim-if.c (TARGET_AT_NULL, TARGET_AT_PHDR, TARGET_AT_PHENT)
 229         (TARGET_AT_PHNUM, TARGET_AT_PAGESZ, TARGET_AT_BASE)
 230         (TARGET_AT_FLAGS, TARGET_AT_ENTRY, TARGET_AT_UID, TARGET_AT_EUID)
 231         (TARGET_AT_GID, TARGET_AT_EGID, TARGET_AT_HWCAP)
 232         (TARGET_AT_CLKTCK): Remove redundant macros.
 233         (AUX_ENT): Adjust to use standard ELF AT_* macros.
 234         (AUX_ENTF): Ditto.  Remove always-0 middle argument.  Update all
 235         callers.
 236         (sim_open): Also pass AT_SECURE.
 237
 238         * cris/sim-main.h (struct _sim_cpu): New member
 239         set_target_thread_data.
 240         * cris/crisv32f.c (CRIS_TLS_REGISTER): Define.
 241         * cris/crisv10f.c: Ditto.
 242         * cris/cris-tmpl.c (MY (set_target_thread_data)): New function.
 243         (MY (f_specific_init)): Set new _sim_cpu member to new function.
 244         * cris/traps.c (TARGET_SYS_set_thread_area): Define.
 245         (cris_break_13_handler) <case TARGET_SYS_set_thread_area>: New
 246         case.
 247
 248         * cris/traps.c (TARGET_SYS_exit_group): Define.
 249         (cris_break_13_handler): Handle it like the exit for the last
 250         thread.
 251
 252         * cris/traps.c (TARGET_UTSNAME): Update to 2009-01-01.
 253         (TARGET_EPOCH): Update to match TARGET_UTSNAME.  Correct comment.
 254         (cris_break_13_handler) <case TARGET_SYS_uname>: Update to
 255         2.6.27.  Set machine field to the BFD printable name of the
 256         machine.
 257
 258         * cris/traps.c (TARGET_MAP_DENYWRITE): Define.
 259         (cris_break_13_handler) <case TARGET_SYS_mmap2>: Handle
 260         TARGET_MAP_DENYWRITE.
 261
 262         * cris/traps.c (TARGET_SYS_access, TARGET_R_OK, TARGET_W_OK)
 263         (TARGET_X_OK, TARGET_F_OK): Define.
 264         (cris_break_13_handler) <case TARGET_SYS_access>: New case.
 265
 266         * cris/semcrisv32f-switch.c: Regenerate.
 267
 268 2008-12-30  Hans-Peter Nilsson  <hp@axis.com>
 269
 270         * cris/sim-if.c (sim_open): If sim_analyze_program fails, emit
 271         just a short CRIS-specific notice.  Tweak the wording for a
 272         failing architecture test.
 273
 274         * cris/traps.c (TARGET_SYS_writev): New macro.
 275         (is_mapped_only, cris_dump_map): New functions.
 276         (cris_break_13_handler) <case TARGET_SYS_mmap2>: Handle more flags
 277         and prot combinations and a non-zero page-offset.  If
 278         TARGET_MAP_FIXED, unmap pages before mapping them.
 279         <case TARGET_SYS_mprotect>: When checking, allow any length
 280         argument.  Don't actually do anything.
 281         <case TARGET_SYS_writev>: New case.
 282
 283         * cris/Makefile.in (SIM_OBJS): Remove sim-hload.o.
 284         * cris/sim-if.c: Include elf-bfd.h.
 285         (struct progbounds): New members end_loadmem, start_nonloadmem.
 286         (xprintf, eprintf): New functions, copied from common/sim-load.c.
 287         (cris_load_elf_file, sim_load, cris_get_progbounds): New functions.
 288         (get_progbounds_iterator): Renamed from get_progbounds.  Make
 289         static.  Update head comment.  Set new struct progbounds members.
 290         (exec_load_addr, interp_load_addr, interp_start_addr): New static
 291         variables.
 292         (aux_ent_phdr, aux_ent_phent, aux_ent_phnum, aux_ent_base)
 293         (aux_ent_entry, cris_write_interp, cris_handle_interpreter): New
 294         functions.
 295         (sim_open): New constant array auxv_entries.  Rewrite AUX_ENT
 296         handling to use auxv_entries.  Improve error message and checking
 297         for invalid programs.  Use new variable abfd for the program
 298         instead of for each access reaching into sd to get it.
 299         (sim_create_inferior): If non-zero, use interp_start_addr instead
 300         of the program start address.
 301         (cris_disassemble_insn): Remove incorrect and unclear, supposedly
 302         stale comment.  Always specify little-endian.
 303
 304 2008-07-29  Nick Clifton  <nickc@redhat.com>
 305
 306         * common/genmloop.sh: Add new parameter: -shell to specify the
 307         command interpreter to use to run the input file.  This is
 308         necessary because otherwise SHELL is taken from the user's
 309         environment, and not from the makefile that invoked this script
 310         and the user might not be running an sh-like shell.
 311         * cris/Makefile.in: Pass -shell parameter to genmloop.sh.
 312         * fr30/Makefile.in: Likewise.
 313         * frv/Makefile.in: Likewise.
 314         * i960/Makefile.in: Likewise.
 315         * iq2000/Makefile.in: Likewise.
 316         * m32r/Makefile.in: Likewise.
 317
 318         * frv/mloop.in: Add missing start of line comment marker.
 319
 320 2008-07-11  Hans-Peter Nilsson  <hp@axis.com>
 321
 322         * cris/configure: Regenerate to track ../common/common.m4 changes.
 323         * cris/config.in: Ditto.
 324
 325 2008-06-06  Vladimir Prus  <vladimir@codesourcery.com>
 326             Daniel Jacobowitz  <dan@codesourcery.com>
 327             Joseph Myers  <joseph@codesourcery.com>
 328
 329         * cris/configure: Regenerate.
 330
 331 2008-05-09  Olivier Hainque  <hainque@adacore.com>
 332
 333         * ppc/altivec.igen (vperm): Latch inputs into temporaries.
 334
 335 2008-03-25  M R Swami Reddy <MR.Swami.Reddy@nsc.com>
 336
 337         * MAINTAINERS: Add myself as maintainer of cr16 port.
 338
 339 2008-02-12  M Ranga Swami Reddy <MR.Swami.Reddy@nsc.com>
 340
 341         Add simulator for National cr16 processor.
 342         * cr16: New directory.
 343         * configure.ac: Add entry for National cr16.
 344         * configure: Regenerate.
 345
 346 2008-02-05  DJ Delorie  <dj@redhat.com>
 347
 348         * configure.ac (v850): V850 now has a testsuite.
 349         * configure (v850): Likewise.
 350
 351 2008-01-01  Daniel Jacobowitz  <dan@codesourcery.com>
 352
 353         Updated copyright notices for most files.
 354
 355 2007-12-19  DJ Delorie  <dj@redhat.com>
 356
 357         * frv/frv.c (frvbf_cut): Only look at the six LSBs of
 358         cut_point.
 359
 360 2007-10-22  Hans-Peter Nilsson  <hp@axis.com>
 361
 362         * cris/arch.c, cris/arch.h, cris/cpuall.h, cris/cpuv10.c,
 363         cris/cpuv10.h, cris/cpuv32.c, cris/cpuv32.h, cris/cris-desc.c,
 364         cris/cris-desc.h, cris/cris-opc.h, cris/decodev10.c,
 365         cris/decodev10.h, cris/decodev32.c, cris/decodev32.h,
 366         cris/modelv10.c, cris/modelv32.c, cris/semcrisv10f-switch.c,
 367         cris/semcrisv32f-switch.c: Regenerate.
 368
 369 2007-08-24  Joel Brobecker  <brobecker@adacore.com>
 370
 371         Switch the license of all files explicitly copyright the FSF
 372         to GPLv3.
 373
 374 2007-03-27  Brooks Moses  <brooks.moses@codesourcery.com>
 375
 376         * Makefile.in: Add dummy "pdf" target.
 377
 378 2007-02-20  Hans-Peter Nilsson  <hp@axis.com>
 379
 380         * cris/traps.c (dump_statistics): Change format for cycle numbers
 381         to %llu and cast parameters to unsigned long long.
 382
 383 2007-02-16  Thiemo Seufer  <ths@mips.com>
 384
 385         * Makefile.in (FLAGS_TO_PASS, TARGET_FLAGS_TO_PASS): Add RUNTEST.
 386
 387 2007-01-28  Manuel Lauss  <slauss@resi.at>
 388
 389         * configure.ac (sh64-*-*): Change to sh64*-*-*.
 390         (sh-*-*): Change to sh*-*-*.
 391         * configure: Regenerated.
 392
 393 2007-01-09  Daniel Jacobowitz  <dan@codesourcery.com>
 394
 395         Updated copyright notices for most files.
 396
 397 2006-12-20  Hans-Peter Nilsson  <hp@axis.com>
 398
 399         * Makefile.in (autoconf-common autoheader-common): Only run
 400         autoheader on subdirs with a file config.in.
 401
 402         * configure.ac (common): Make the default "yes" for all targets
 403         with sim subdirs.
 404         * configure: Regenerate.
 405
 406         * Makefile.in (autoconf-common autoheader-common): In documented
 407         usage, say SHELL=/bin/sh.
 408         (.PHONY): Add autoheader-common.
 409
 410         * MAINTAINERS: Add self as authorized committer for *.
 411
 412 2006-10-02  Edgar E. Iglesias  <edgar@axis.com>
 413             Hans-Peter Nilsson  <hp@axis.com>
 414
 415         * cris/cris-sim.h (enum cris_unknown_syscall_action_type)
 416         (cris_unknown_syscall_action): Declare.
 417         * cris/sim-if.c (cris_unknown_syscall_action): Define.
 418         (cris_options): Add cris-unknown-syscall option.
 419         (cris_option_handler): Correct comment about and error message for
 420         invalid --cris-cycles argument.  Handle --cris-unknown-syscall.
 421         * cris/traps.c: Include stdarg.h
 422         (cris_unknown_syscall): New function.
 423         (cris_break_13_handler): Instead of sim_io_eprintf and
 424         sim_engine_halt, call cris_unknown_syscall to handle more or less
 425         unknown syscalls.  Adjust code as necessary to handle return
 426         value.
 427
 428 2006-09-30  Daniel Jacobowitz  <dan@codesourcery.com>
 429
 430         * MAINTAINERS: Add Dave Brolley for sh64.
 431
 432 2006-09-30  Hans-Peter Nilsson  <hp@axis.com>
 433
 434         * cris/traps.c (TARGET_PIPE_BUF): New macro.
 435         (cris_pipe_empty): Correct initialization of "remaining".  Only
 436         adjust the "write" return value if more than TARGET_PIPE_BUF bytes
 437         are written.
 438
 439 2006-09-29  Hans-Peter Nilsson  <hp@axis.com>
 440
 441         * cris/configure.ac: Check for limits.h and sys/param.h.
 442         * cris/configure, cris/config.in: Rebuild.
 443         * cris/traps.c (SIM_PATHMAX): New macro.
 444         (cris_break_13_handler): Use SIM_PATHMAX, not MAXPATHLEN.
 445
 446 2006-08-08  Joel Sherrill <joel.sherrill@oarcorp.com>
 447
 448         * configure.ac (sparc-*-rtems*|sparc-*-elf*): Enable erc32 simulator.
 449         * Makefile.in (FLAGS_TO_PASS): Include libdir.
 450         * configure: Regenerated.
 451
 452 2006-06-05  Daniel Jacobowitz  <dan@codesourcery.com>
 453
 454         * cris/configure: Regenerated.
 455
 456 2006-05-31  Daniel Jacobowitz  <dan@codesourcery.com>
 457
 458         * cris/configure: Regenerated.
 459
 460 2006-05-05  Andreas Schwab  <schwab@suse.de>
 461
 462         * configure.ac (CFLAGS_FOR_BUILD): Set and substitute.
 463         * configure: Regenerate.
 464
 465         * Makefile.in (CFLAGS_FOR_BUILD): Define.
 466         (CC_FOR_BUILD): Don't override.
 467         (FLAGS_TO_PASS): Pass CFLAGS_FOR_BUILD.
 468
 469 2006-05-04  Daniel Jacobowitz  <dan@codesourcery.com>
 470
 471         * MAINTAINERS: Add an "Authorized committers" section, and list
 472         DJ Delorie for v850.
 473
 474 2006-04-08  Hans-Peter Nilsson  <hp@axis.com>
 475
 476         * cris/crisv32f.c (MY (deliver_interrupt)): Set CCS to new_ccs.
 477
 478 2006-04-03  Hans-Peter Nilsson  <hp@axis.com>
 479
 480         * cris/dv-cris.c, cris/dv-rv.c, cris/rvdummy.c: New files.
 481         * cris/Makefile.in (CONFIG_DEVICES): Remove redundant setting.
 482         (dv-cris.o, dv-rv.o rvdummy$(EXEEXT), rvdummy.o): New rules.
 483         (all): Depend on rvdummy$(EXEEXT).
 484         * cris/configure.ac: Call SIM_AC_OPTION_WARNINGS.  Check for
 485         sys/socket.h and sys/select.h.  Call SIM_AC_OPTION_HARDWARE,
 486         default off.
 487         * cris/configure: Regenerate.
 488         * cris/cris-sim.h (cris_have_900000xxif): Declare here.
 489         (enum cris_interrupt_type, crisv10deliver_interrupt)
 490         (crisv32deliver_interrupt: New declarations.
 491         * cris/cris-tmpl.c [WITH_HW] (MY (f_model_insn_after)): Call
 492         sim_events_tickn and set state-events member work_pending when it's
 493         time for the next event.
 494         [WITH_HW] (MY (f_specific_init)): Set CPU-model-specific
 495         interrupt-delivery function.
 496         * cris/crisv10f.c (MY (deliver_interrupt)): New function.
 497         * cris/crisv32f.c (MY (deliver_interrupt)): New function.
 498         * cris/devices.c: Include hw-device.h.
 499         (device_io_read_buffer) [WITH_HW]: Call hw_io_read_buffer.
 500         (device_io_write_buffer): Only perform 0x900000xx-functions if
 501         cris_have_900000xxif is nonzero.  Else if WITH_HW defined,
 502         call hw_io_write_buffer.  Add return 0 last in function.
 503         * cris/sim-if.c (cris_have_900000xxif): Now global.
 504         (sim_open) [WITH_HW]: Clear deliver_interrupt cpu member.
 505         Force "-model" option, effectively.
 506         * cris/sim-main.h (cris_interrupt_delivery_fn): New type.
 507         (struct _sim_cpu) [WITH_HW]: New member deliver_interrupt.
 508
 509 2006-04-02  Hans-Peter Nilsson  <hp@axis.com>
 510
 511         * cris/Makefile.in (CRISV10F_OBJS): Remove semcrisv10f-switch.o.
 512         (CRISV32F_OBJS): Remove semcrisv32f-switch.o.
 513         (semcrisv10f-switch.o, semcrisv32f-switch.o: Remove dependency rules.
 514
 515 2006-03-13  DJ Delorie  <dj@redhat.com>
 516
 517         * MAINTAINERS: Add self as m32c sim maintainer.
 518
 519 2006-02-23  Hans-Peter Nilsson  <hp@axis.com>
 520
 521         * cris/traps.c (syscall_map): Remove CB_SYS_time / TARGET_SYS_time
 522         mapping.
 523         (cris_break_13_handler) <case TARGET_SYS_time>: New case.
 524
 525 2006-01-23  Jim Blandy  <jimb@redhat.com>
 526
 527         Add simulator for Renesas M32C and M16C.
 528
 529         * m32c: New directory.
 530         * configure.ac: Add entry for Renesas M32C.
 531         * configure: Regenerate.
 532
 533 2006-01-10  Hans-Peter Nilsson  <hp@axis.com>
 534
 535         * cris/cris-tmpl.c (MY (f_model_insn_before)): Only display basic
 536         cycle count for the current insn.
 537
 538 2005-12-06  Hans-Peter Nilsson  <hp@axis.com>
 539
 540         * cris/cpuv10.h, cris/cpuv32.h, cris/cris-desc.c, cris/cris-opc.h,
 541         cris/decodev10.c, cris/decodev10.h, cris/decodev32.c,
 542         cris/decodev32.h, cris/modelv10.c, cris/modelv32.c,
 543         cris/semcrisv10f-switch.c, cris/semcrisv32f-switch.c: Regenerate.
 544
 545 2005-12-05  Hans-Peter Nilsson  <hp@axis.com>
 546
 547         * cris/arch.c, cris/arch.h, cris/cpuall.h, cris/cpuv10.c,
 548         cris/cpuv10.h, cris/cpuv32.c, cris/cpuv32.h, cris/cris-desc.c,
 549         cris/cris-desc.h, cris/cris-opc.h, cris/decodev10.c,
 550         cris/decodev10.h, cris/decodev32.c, cris/decodev32.h,
 551         cris/modelv10.c, cris/modelv32.c, cris/semcrisv10f-switch.c,
 552         cris/semcrisv32f-switch.c: Regenerate.
 553
 554 2005-11-20  Hans-Peter Nilsson  <hp@axis.com>
 555
 556         * cris/traps.c (TARGET_O_RDONLY, TARGET_O_WRONLY): Define.
 557         (open_map): Use TARGET_O_ACCMODE, TARGET_O_RDONLY and
 558         TARGET_O_WRONLY.
 559         (cris_break_13_handler) <case TARGET_SYS_fcntl>: Add support for
 560         F_GETFL on fd 0, 1 and 2.
 561
 562 2005-11-17  Hans-Peter Nilsson  <hp@axis.com>
 563
 564         * cris/sim-main.h (struct _sim_cpu): New members last_syscall,
 565         last_open_fd, last_open_flags.
 566         * cris/traps.c: Don't include targ-vals.h.
 567         (TARGET_O_ACCMODE): Define.
 568         (cris_break_13_handler): Set new _sim_cpu members.
 569         <case TARGET_SYS_fcntl>: Support special case of F_GETFL.
 570         Rearrange code as switch.  Emit "unimplemented" abort for
 571         unimplemented fcntl calls.
 572
 573         * cris/traps.c (TARGET_SYS_stat): Define.
 574         (syscall_stat32_map): Add entry for TARGET_SYS_stat.
 575         (cris_break_13_handler) <case TARGET_SYS_stat>: New case.
 576
 577 2005-11-16  Hans-Peter Nilsson  <hp@axis.com>
 578
 579         * cris/cris-tmpl.c (MY (f_model_insn_before)): Make sure only the
 580         low 32 bits are used after an unsigned long cast.
 581
 582 2005-05-28  Hans-Peter Nilsson  <hp@axis.com>
 583
 584         * cris/Makefile.in (stamp-v32fmloop): Depend on stamp-v10fmloop.
 585
 586 2005-05-26  Chris Demetriou  <cgd@netbsd.org>
 587
 588         * MAINTAINERS: Update my mail address, move myself to the
 589         "Past maintainers" section.
 590
 591 2005-05-17  Corinna Vinschen  <vinschen@redhat.com>
 592
 593         * configure.ac: Add igen to v850 build.
 594         * configure: Regenerate.
 595
 596 2005-04-29  Paul Brook  <paul@codesourcery.com>
 597
 598         * common/callback.c (PIPE_BUF): Provide default definition.
 599         (os_lstat): Use stat if lstat is not available on the host.
 600         (os_ftruncate): Return EINVAL if not available on the host.
 601         (os_truncate): Ditto.
 602         * common/configure.ac: Check for lstat, truncate and ftruncate.
 603         * common/configure: Regenerate.
 604         * common/config.in: Regenerate.
 605
 606 2005-04-27  Paul Brook  <paul@codesourcery.com>
 607
 608         * common/Make-common.in: Add $(EXEEXT) to "run".
 609
 610 2005-04-18  Hans-Peter Nilsson  <hp@axis.com>
 611
 612         * cris/traps.c (cris_break_13_handler) <case TARGET_SYS_mmap2>:
 613         For ((len & 8191) != 0 && fd == (USI) -1), don't say this isn't
 614         implemented.  In call to create_map, pad length argument to 8k.
 615
 616 2005-04-15  Corinna Vinschen  <vinschen@redhat.com>
 617
 618         * configure.ac: Add explicit sh64 case.
 619         * configure: Regenerate.
 620
 621 2005-03-30  Paul Brook  <paul@codesourcery.com>
 622
 623         * arm/wrapper.c: Provide SIGTRAP and SIGBUS.
 624
 625 2005-03-24  Hans-Peter Nilsson  <hp@axis.com>
 626
 627         * cris/Makefile.in (stamp-v10fcpu, stamp-v32fcpu): Add kludge to
 628         include cgen-ops.h in decodev10.c and decodev32.c.
 629         * cris/sim-main.h: Don't include cgen-ops.h here.
 630         * cris/arch.c, cris/arch.h, cris/cpuall.h, cris/cpuv10.c,
 631         cris/cpuv10.h, cris/cpuv32.c, cris/cpuv32.h, cris/cris-desc.c,
 632         cris/cris-desc.h, cris/cris-opc.h, cris/decodev10.c,
 633         cris/decodev10.h, cris/decodev32.c, cris/decodev32.h,
 634         cris/modelv10.c, cris/modelv32.c, cris/semcrisv10f-switch.c,
 635         cris/semcrisv32f-switch.c: Regenerate.
 636
 637         * cris/traps.c (cris_break_13_handler) <case
 638         TARGET_SYS_rt_sigaction>: Rename sa_handler, sa_flags,
 639         sa_restorer, sa_mask_low, sa_mask_high to target_sa_handler etc.
 640
 641 2005-03-23  Mark Kettenis  <kettenis@gnu.org>
 642
 643         * cris/configure: Regenerate.
 644
 645 2005-02-28  Jim Blandy  <jimb@redhat.com>
 646
 647         * d10v/configure.ac, igen/configure.ac, m68hc11/configure.ac,
 648         mips/configure.ac, mn10300/configure.ac, v850/configure.ac:
 649         Regenerated, after change to common/aclocal.m4.
 650
 651 2005-02-18  Corinna Vinschen  <vinschen@redhat.com>
 652
 653         * iq2000: New target subdirectory.
 654         * configure.ac: Add iq2000 target.
 655         * configure: Regenerate.
 656
 657 2005-01-29  Hans-Peter Nilsson  <hp@axis.com>
 658
 659         * Makefile.in (all, clean mostlyclean, distclean maintainer-clean)
 660         (realclean, install): Fail if subdir make failed.
 661
 662 2005-01-28  Hans-Peter Nilsson  <hp@axis.com>
 663
 664         * cris: New directory, simulator for Axis Communications CRIS
 665         including CRIS v32, CGEN-based.
 666         * configure.ac: Add corresponding configury.
 667         * configure: Regenerate.
 668
 669 2005-01-17  Andrew Cagney  <cagney@gnu.org>
 670
 671         * configure.ac: For mips*-*-* and mn10300*-*-* configure the
 672         common directory.  Remove sparc*-*-* from list.
 673
 674 2005-01-11  Andrew Cagney  <cagney@gnu.org>
 675
 676         * Makefile.in (autoconf-common autoheader-common): Add --force to
 677         autoconf and autoheader.
 678         (autoconf-common autoheader-common)
 679         (autoconf-install autoheader-install): Check for configure.ac, not
 680         configure.in.
 681         * configure.ac: Delete AC_CONFIG_AUX_DIR.
 682         * configure: Re-generate.
 683
 684 2005-01-07  Andrew Cagney  <cagney@gnu.org>
 685
 686         * configure.ac: Replace configure.in.  Requires autoconf 2.59 and
 687         correctly calls AC_CONFIG_SUBDIRS.
 688         * configure: Re-generate.
 689
 690 2004-12-01  Andrew Cagney  <cagney@gnu.org>
 691
 692         * i960, h8500: Delete directory.
 693
 694 2004-11-12  Andrew Cagney  <cagney@gnu.org>
 695
 696         * d30v, fr30, mn10200, z8k: Delete directory.
 697
 698 2004-03-10  Ben Elliston  <bje@gnu.org>
 699
 700         * MAINTAINERS: Update my mail address.
 701
 702 2004-01-26  Chris Demetriou  <cgd@broadcom.com>
 703
 704         * configure.in (mips*-*-*): Configure in testsuite.
 705         * configure: Regenerate.
 706
 707 2003-10-08  Dave Brolley  <brolley@redhat.com>
 708
 709         * configure.in: Move frv handling to alphabetically correct placement.
 710
 711 2003-09-03  Andreas Schwab  <schwab@suse.de>
 712
 713         * Makefile.in (FLAGS_TO_PASS): Pass down $(bindir) and $(mandir).
 714
 715 2003-08-29  Dave Brolley  <brolley@redhat.com>
 716
 717         * MAINTAINERS: Add myself as maintainer of the FRV port.
 718
 719 2003-08-20  Michael Snyder  <msnyder@redhat.com>
 720             Dave Brolley  <brolley@redhat.com>
 721
 722         * frv/: New directory, simulator for the Fujitsu FRV.
 723         * configure.in: Add frv configury.
 724         * configure: Regenerate.
 725
 726 2003-08-10  Ben Elliston  <bje@wasabisystems.com>
 727
 728         * MAINTAINERS: Update my mail address.
 729
 730 2003-08-09  Andrew Cagney  <cagney@redhat.com>
 731
 732         * MAINTAINERS: Andrew Cagney (mips) and Geoff Keating (ppc) drop
 733         maintenance.  List igen and sh maintainers.  Mention that target
 734         and global maintainers pick up the slack.
 735
 736 2003-07-09  Michael Snyder  <msnyder@redhat.com>
 737
 738         * configure.in: Add testsuite to extra_subdirs for sh.
 739         * configure: Regenerate.
 740
 741 2003-01-23  Nick Clifton  <nickc@redhat.com>
 742
 743         * Add sh2e support:
 744
 745 2002-04-02  Alexandre Oliva  <aoliva@redhat.com>
 746
 747         * sh/gencode.c: Replace sh3e with sh2e except in fsqrt.
 748
 749 2002-08-24  Geoffrey Keating  <geoffk@redhat.com>
 750
 751         * MAINTAINERS: Update my email address.
 752
 753 2002-07-17  Andrew Cagney  <ac131313@redhat.com>
 754
 755         * w65/: Delete directory.
 756
 757 2002-07-16  Andrew Cagney  <ac131313@redhat.com>
 758
 759         * configure.in (extra_subdirs): Mark fr30-*-* as obsolete.
 760         * configure: Re-generate.
 761
 762 2002-07-13  Andrew Cagney  <ac131313@redhat.com>
 763
 764         * configure.in (extra_subdirs): Mark d30v-*-* as obsolete.
 765         * configure: Re-generate.
 766
 767 2002-06-16  Andrew Cagney  <ac131313@redhat.com>
 768
 769         * Makefile.in (autoconf-changelog autoheader-changelog): Let name,
 770         id, date and host to be overriden by NAME, ID, DATE and HOST
 771         respectfully.  Use ISO dates.
 772
 773 Thu Jun  6 12:34:13 2002  Andrew Cagney  <cagney@redhat.com>
 774
 775         * Makefile.in (ChangeLog): New makefile variable.
 776         * README-HACKING: Mention the ChangeLog makefile variable.
 777
 778 2002-06-01  Andrew Cagney  <ac131313@redhat.com>
 779
 780         * tic80/: Delete directory.
 781
 782 2002-05-16  Stephane Carrez  <stcarrez@nerim.fr>
 783
 784         * MAINTAINERS: Update my email address.
 785
 786 2002-03-06  Stephane Carrez  <Stephane.Carrez@worldnet.fr>
 787
 788         * MAINTAINERS: Record self as maintainer of m68hc11 simulator.
 789
 790 2002-03-01  Frank Ch. Eigler  <fche@redhat.com>
 791
 792         * MAINTAINERS: Record self as a co-maintainer of just common/.
 793
 794 2002-02-07  Nick Clifton  <nickc@cambridge.redhat.com>
 795
 796         * MAINTAINERS: Point to GDB files describing overall maintaince
 797         and check-in procedures.
 798
 799 2002-01-10  Nick Clifton  <nickc@cambridge.redhat.com>
 800
 801         * MAINTAINERS: Add myself for ARM portions.
 802
 803 2001-10-19  Andrew Cagney  <ac131313@redhat.com>
 804
 805         * configure.in: When Linux or NetBSD, enable PowerPC simulator.
 806         * configure: Re-generate.
 807
 808 2001-02-16  Ben Elliston  <bje@redhat.com>
 809
 810         * MAINTAINERS: Add myself for common portions.
 811
 812 2001-01-15  Chris Demetriou  <cgd@broadcom.com>
 813
 814         * MAINTAINERS: Added self and Andrew for the mips sim.
 815
 816 2000-10-25  Geoff Keating  <geoffk@cygnus.com>
 817
 818         * MAINTAINERS: Added self and Andrew for the ppc sim.
 819
 820 Thu Jul 27 21:26:26 2000  Andrew Cagney  <cagney@b1.cygnus.com>
 821
 822         From Stephane Carrez <Stephane.Carrez@worldnet.fr>:
 823         * m68hc11: New directory.
 824         * configure.in: Add.
 825         * configure: Regenerate.
 826
 827 Tue Jul  4 13:43:54 2000  Andrew Cagney  <cagney@b1.cygnus.com>
 828
 829         * tic80: New directory.
 830         * configure.in: Add configury.
 831         * configure: Regenerate.
 832
 833 2000-04-20  Nick Clifton  <nickc@cygnus.com>
 834
 835         * configure.in (extra_subdirs): Add testsuite to strongarm
 836         directories.
 837         * configure: Regenerate.
 838
 839 Sat Mar  4 16:48:54 2000  Andrew Cagney  <cagney@b1.cygnus.com>
 840
 841         * MAINTAINERS: New file.  Blank.
 842
 843 1999-11-18  Ben Elliston  <bje@cygnus.com>
 844
 845         * configure.in: Require autoconf 2.13 and remove obsolete
 846         invocation of AC_C_CROSS.
 847         * configure: Regenerate.
 848
 849 1999-09-29  Doug Evans  <devans@casey.cygnus.com>
 850
 851         * configure.in: Configure the testsuite directory for thumb.
 852         * configure: Regenerate.
 853
 854 1999-07-16  Ben Elliston  <bje@cygnus.com>
 855
 856         * configure.in: Configure the testsuite directory for arm.
 857         * configure: Regenerate.
 858
 859 1999-04-08  Nick Clifton  <nickc@cygnus.com>
 860
 861         * configure.in: Add support for MCore target.
 862         * configure: Regenerate.
 863
 864 1999-03-14  Stan Shebs  <shebs@andros.cygnus.com>
 865
 866         * Makefile.in (FLAGS_TO_PASS, TARGET_FLAGS_TO_PASS): Remove
 867         RUNTEST instead of commenting out, fixes portability problem.
 868
 869 1999-02-08  Nick Clifton  <nickc@cygnus.com>
 870
 871         * configure.in: Add support for StrongARM target.
 872         * configure: Regenerate.
 873
 874 1999-01-04  Jason Molenda  (jsm@bugshack.cygnus.com)
 875
 876         * configure.in: Require autoconf 2.12.1 or higher.
 877
 878 1998-12-08  James E Wilson  <wilson@wilson-pc.cygnus.com>
 879
 880         * configure.in (i960-*-*): Add.
 881         * configure: Rebuild.
 882
 883 Wed Nov  4 19:11:43 1998  Dave Brolley  <brolley@cygnus.com>
 884
 885         * configure.in: Added case for fr30-*-*.
 886         * configure: Regenerated.
 887
 888 Fri Sep 25 10:12:19 1998  Christopher Faylor <cgf@cygnus.com>
 889
 890         * ppc/Makefile.in: Add EXEEXT to installed powerpc-eabi-run program
 891         to allow successful operation on Windows.
 892
 893 Thu May 28 14:59:46 1998 Jillian Ye <jillian@cygnus.com>
 894
 895         * Makefile.in: Take RUNTEST out of FLAGS_TO_PASS so that make
 896         check can be invoked recursively.
 897
 898 Wed Apr 29 12:38:53 1998  Mark Alexander  <marka@cygnus.com>
 899
 900         * configure.in: Build simulator on sparclite and sparc86x targets.
 901         * configure: Regenerate.
 902
 903 Sun Apr 26 15:21:01 1998  Tom Tromey  <tromey@cygnus.com>
 904
 905         * Makefile.in (autoconf-common autoheader-common): Don't pass -l
 906         to autoconf and autoheader.
 907
 908 Fri Apr 24 11:14:13 1998  Tom Tromey  <tromey@cygnus.com>
 909
 910         * Makefile.in (autoconf-common autoheader-common): Pass `-l
 911         ../common' to autoconf and autoheader.  Unconditionally run
 912         autoconf in every subdir.
 913         (autoconf-changelog autoheader-changelog): Unconditionally run
 914         commands in every subdir.
 915         (autoconf-install autoheader-install): Likewise.
 916
 917 Tue Mar 24 17:12:43 1998  Stu Grossman  <grossman@bhuna.cygnus.co.uk>
 918
 919         * Makefile.in:  Get SHELL from configure.
 920         * (FLAGS_TO_PASS):  Pass down SHELL.
 921         * configure:  Regenerate with autoconf 2.12.1 to fix shell issues for
 922         NT native builds.
 923
 924 Tue Mar 24 11::18:00 1998  Joyce Janczyn  <janczyn@cygnus.com>
 925
 926         * configure.in (extra_subdirs): Enable igen for mn10300.
 927         * configure: Re-generate.
 928
 929 Tue Dec  2 10:10:42 1997  Nick Clifton  <nickc@cygnus.com>
 930
 931         * configure.in (extra_subdirs): Add support for thumb target.
 932
 933         * configure (extra_subdirs): Add support for thumb target.
 934
 935 Wed Oct  8 12:38:48 1997  Andrew Cagney  <cagney@b1.cygnus.com>
 936
 937         * configure.in (extra_subdirs): Add IGEN directory when MIPS
 938         target.
 939         * configure: Regenerate.
 940
 941 Fri Sep 12 13:10:31 1997  Andrew Cagney  <cagney@b1.cygnus.com>
 942
 943         * configure.in (extra_subdirs): v850ea needs igen.
 944         * configure: Re-generate.
 945
 946 Mon Sep  1 16:48:23 1997  Andrew Cagney  <cagney@b1.cygnus.com>
 947
 948         * configure.in (testdir): When a testsuite directory, add that to
 949         the list of confdirs.
 950
 951 Tue Aug 19 11:17:46 1997  Andrew Cagney  <cagney@b1.cygnus.com>
 952
 953         * configure.in (extra_subdirs): Enable igen ready for V850.
 954
 955 Tue Aug 26 15:14:48 1997  Andrew Cagney  <cagney@b1.cygnus.com>
 956
 957         * configure.in (w65-*-*, only_if_enabled): Set.
 958         * configure: Re-generate.
 959
 960 Mon Aug 25 16:26:53 1997  Andrew Cagney  <cagney@b1.cygnus.com>
 961
 962         * configure.in (sparc*-*-*, only_if_enabled): Set
 963         only_if_enabled=yes.  Check only_if_enabled before enabling a
 964         simulator.
 965         * configure: Regenerate.
 966
 967 Mon Aug 18 10:56:59 1997  Nick Clifton  <nickc@cygnus.com>
 968
 969         * configure.in (extra_subdirs): Add v850e target.
 970
 971 Mon Aug 18 10:56:59 1997  Nick Clifton  <nickc@cygnus.com>
 972
 973         * configure.in (extra_subdirs): Add v850ea target.
 974
 975 Fri Jul 25 11:40:47 1997  Doug Evans  <dje@canuck.cygnus.com>
 976
 977         * configure.in (sparc*-*-*): Don't build erc32.
 978         * configure: Regenerate.
 979
 980 Thu Apr 24 00:47:20 1997  Doug Evans  <dje@canuck.cygnus.com>
 981
 982         * configure.in (m32r-*-*): New target.
 983         * configure: Regenerate.
 984
 985         * Makefile.in (autoconf-common, autoconf-changelog): Change $* to $@.
 986
 987 Mon Apr 21 22:57:55 1997  Andrew Cagney  <cagney@b1.cygnus.com>
 988
 989         * Makefile.in (.NOEXPORT, MAKEOVERRIDES): Moved to end, BSD make
 990         thought that .NOEXPORT was the default target.
 991
 992 Fri Apr 11 17:18:07 1997  Ian Lance Taylor  <ian@cygnus.com>
 993
 994         * Makefile.in (clean mostlyclean): Restore targets accidentally
 995         deleted in earlier change.
 996
 997 Thu Apr  3 12:20:32 1997  Andrew Cagney  <cagney@kremvax.cygnus.com>
 998
 999         * Makefile.in (autoheader-common, autoheader-changelog,
1000         autoheader-install): Perform autoheader in addition to autoconf.
1001
1002 Wed Apr  2 15:09:05 1997  Doug Evans  <dje@canuck.cygnus.com>
1003
1004         * Makefile.in (autoconf-install): New target.
1005         (autoconf-changelog): Try different way to obtain user name.
1006
1007 Wed Apr  2 14:25:52 1997  Andrew Cagney  <cagney@kremvax.cygnus.com>
1008
1009         * Makefile.in (autoconf-changelog): New target, update
1010         ChangeLog for all subdirectories - normally used after
1011         autoconf-common target.
1012
1013 Wed Mar 19 14:26:21 1997  Andrew Cagney  <cagney@kremvax.cygnus.com>
1014
1015         * configure.in (extra_subdirs): Include testsuite for d30v.
1016         * configure: Regenerate.
1017
1018         * Makefile.in (RUNTEST, RUNTESTFLAGS): Borrow test rules from
1019         ../gdb/Makefile.in
1020         (check): New rules - drive the testsuite.
1021
1022 Mon Mar  3 13:01:00 1997  Jeffrey A Law  (law@cygnus.com)
1023
1024         * configure.in: Add mn10200 configure lines accidentally
1025         removed.
1026         * configure: Regenerated.
1027
1028 Wed Feb 19 10:34:20 1997  Andrew Cagney  <cagney@critters.cygnus.com>
1029
1030         * configure.in (extra_subdirs): Generalize common sub directory
1031         into a list.
1032         (extra_subdirs): For d30v add igen to the list to be built.
1033
1034 Sun Feb 16 16:37:47 1997  Andrew Cagney  <cagney@critters.cygnus.com>
1035
1036         * configure.in (d30v): New target.
1037         * configure: Regenerated.
1038
1039 Wed Feb 19 23:17:13 1997  Jeffrey A Law  (law@cygnus.com)
1040
1041         * configure.in: Don't require GCC to build the mn10200
1042         simulator anymore.
1043         * configure: Rebuilt.
1044
1045 Wed Feb  5 13:28:13 1997  Doug Evans  <dje@canuck.cygnus.com>
1046
1047         * configure.in: Don't configure any subdirs if no simulator
1048         is being built.  Don't use erc32 for sparc64.
1049         * configure: Regenerated.
1050
1051 Tue Feb  4 13:19:39 1997  Doug Evans  <dje@canuck.cygnus.com>
1052
1053         * Makefile.in (autoconf-common): New target.
1054         * configure.in: Do configure common.
1055         * configure: Regenerated.
1056
1057 Thu Jan 23 13:59:52 1997  Stu Grossman  (grossman@critters.cygnus.com)
1058
1059         * configure configure.in:  Don't configure common anymore.  Files
1060         from common are now built in the individual simualtor directories.
1061         This fixes problems with the WinGDB build procedure.
1062
1063 Mon Jan 13 13:16:42 1997  Jeffrey A Law  (law@cygnus.com)
1064
1065         * configure: Enable the mn10200 simulator.
1066
1067 Wed Nov 20 01:00:36 1996  Doug Evans  <dje@canuck.cygnus.com>
1068
1069         * configure.in (configdirs): Add common.
1070         * configure: Regenerated.
1071
1072 Fri Nov  1 08:03:30 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
1073
1074         * configure.in (powerpc*-*-linux*): Treat like the other powerpc
1075         system V based targets.
1076         * configure: Regenerate.
1077
1078 Thu Oct 17 12:50:08 1996  Doug Evans  <dje@canuck.cygnus.com>
1079
1080         * configure.in (--enable-sim-powerpc): Delete.
1081         (--enable-sim): Add.
1082         * configure: Regenerated.
1083
1084 Fri Oct 11 21:13:43 1996  Jeffrey A Law  (law@cygnus.com)
1085
1086         * configure.in: Only build the V850 simulator if
1087         we are using gcc.
1088         * configure: Rebuild.
1089
1090 Sun Sep  8 17:22:50 1996  Ian Lance Taylor  <ian@cygnus.com>
1091
1092         * configure.in: Do build erc32 for DOS and Windows hosts.
1093         * configure: Rebuild.
1094
1095 Wed Sep  4 18:11:27 1996  Stu Grossman  (grossman@critters.cygnus.com)
1096
1097         * Makefile.in erc32/Makefile.in:  Don't set srcroot.  This should
1098         be inherited from the parent.  Remove INSTALL_XFORM and
1099         INSTALL_XFORM1.  Make INSTALL be set from configure.
1100
1101 Wed Sep  4 15:49:16 1996  Ian Lance Taylor  <ian@cygnus.com>
1102
1103         * configure.in: Only build the MIPS simulator if we are using
1104         gcc.
1105         * configure: Rebuild.
1106
1107 Wed Aug 28 19:05:23 1996  Jeffrey A Law  (law@cygnus.com)
1108
1109         * configure.in (v850-*-*): Added V850 simulator.
1110
1111 Thu Aug  1 17:08:41 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
1112
1113         * configure.in (d10v-*-*): Added D10V simulator.
1114
1115 Wed Jun 26 12:33:57 1996  Jason Molenda  (crash@godzilla.cygnus.co.jp)
1116
1117         * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir,
1118         INSTALL_PROGRAM, INSTALL_DATA): Use autoconf-set values.
1119         (docdir): Removed.
1120         * configure.in (AC_PREREQ): autoconf 2.5 or higher.
1121         (AC_PROG_INSTALL): Added.
1122         * configure: Rebuilt.
1123
1124 Mon Jun 24 14:18:26 1996  Ian Lance Taylor  <ian@cygnus.com>
1125
1126         * configure.in: Only configure erc32 if using gcc.
1127         * configure: Rebuild.
1128
1129 Tue Jun  4 09:24:21 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
1130
1131         * configure.in (sim_target): Build PowerPC simulator for powerpc
1132         System V.4, Solaris, and Elf targets.
1133         * configure: Regenerate with autoconf 2.10.
1134
1135 Wed May 22 12:10:49 1996  Rob Savoye  <rob@chinadoll>
1136
1137         * configure.in: Only built erc32 simulator on Unix hosts as it
1138         uses pseudo ttys.
1139         * configure: Regenerated with autoconf 2.8.
1140
1141 Sun May 19 20:20:40 1996  Rob Savoye  <rob@chinadoll.cygnus.com>
1142
1143         * erc32: Sparc simulator from the ESA.
1144
1145 Sun Apr  7 21:00:09 1996  Fred Fish  <fnf@cygnus.com>
1146
1147         From: Miles Bader  <miles@gnu.ai.mit.edu>
1148         * configure.in: Use AC_CHECK_TOOL to find AR & RANLIB.
1149         * configure: Regenerate using autoconf.
1150
1151 Thu Feb 22 11:31:50 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
1152
1153         * Makefile.in (install): Fix typo.
1154
1155 Wed Feb 21 11:59:57 1996  Ian Lance Taylor  <ian@cygnus.com>
1156
1157         * configure: Regenerate with autoconf 2.7.
1158
1159         * Makefile.in (all): Simplify.
1160         (clean, mostlyclean): SUBDIRS may contain whitespace; fix the loop
1161         as in the all target.
1162         (distclean, maintainer-clean, realclean): Likewise.
1163         (install): Likewise.
1164
1165 Thu Feb 15 18:37:00 1996  Fred Fish  <fnf@cygnus.com>
1166
1167         * Makefile.in (all): Remove extra '\' char from shell script.
1168
1169 Wed Feb 14 16:43:59 1996  Mike Meissner  <meissner@tiktok.cygnus.com>
1170
1171         * Makefile.in (all): Avoid a for loop with zero elements, even if
1172         the loop will not be executed because of an if statement.
1173
1174 Wed Jan 31 21:48:34 1996  Fred Fish  <fnf@cygnus.com>
1175
1176         * Makefile.in (install): Add missing semicolon in "fi \".
1177
1178 Thu Nov  9 16:10:56 1995  Michael Meissner  <meissner@tiktok.cygnus.com>
1179
1180         * Makefile.in (AR, CC, CFLAGS, CC_FOR_BUILD, RANLIB): Pick up
1181         defaults from configure.
1182
1183         * configure.in: Pick up AR, CC, CFLAGS, CC_FOR_BUILD, RANLIB using
1184         configure defaults.
1185         (powerpc*-*-eabi*): Build simulator for all powerpc eabi targets
1186         if either --enable-sim-powerpc is used, or the host compiler is
1187         GCC.
1188
1189 Wed Nov  8 15:46:49 1995  James G. Smith  <jsmith@pasanda.cygnus.co.uk>
1190
1191         * configure.in (mips*-*-*): Added "mips" simulator target.
1192         * configure: Re-generated.
1193
1194 Tue Oct 10 11:08:20 1995  Fred Fish  <fnf@cygnus.com>
1195
1196         * Makefile.in (BISON): Remove macro.
1197         (FLAGS_TO_PASS): Remove BISON.
1198
1199 Sun Oct  8 04:26:27 1995  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
1200
1201         * configure.in:  Explicitly `exit 0' for broken shells.
1202         * configure:  Rebuilt.
1203
1204 Fri Oct  6 12:03:27 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
1205
1206         * common/run.c (main): Initialize the callbacks.
1207
1208 Wed Sep 20 13:34:50 1995  Ian Lance Taylor  <ian@cygnus.com>
1209
1210         * Makefile.in (maintainer-clean): New synonym for realclean.
1211
1212 Fri Aug 25 11:53:43 1995  Michael Meissner  <meissner@tiktok.cygnus.com>
1213
1214         * configure.in (powerpc*-*-eabisim*): Only build the simulator if
1215         the target is powerpc*-*-eabisim*, since it requires GCC to build.
1216
1217 Mon Aug 21 17:53:48 1995  Michael Meissner  <meissner@tiktok.cygnus.com>
1218
1219         * configure.in (powerpc{,le}-*-*): Add psim from Andrew Cagney
1220         <cagney@highland.com.au>.
1221         * configure: Regnerate from configure.in.
1222
1223 Thu Aug  3 10:45:37 1995  Fred Fish  <fnf@cygnus.com>
1224
1225         * Update all FSF addresses except those in COPYING* files.
1226
1227 Thu Jul 20 15:17:29 1995  Fred Fish  <fnf@cygnus.com>
1228
1229         * Makefile.in (CC_FOR_BUILD):  Define default and arrange to pass
1230         submakes either default or passed in value.
1231
1232 Wed Jul  5 14:32:54 1995  J.T. Conklin  <jtc@rtl.cygnus.com>
1233
1234         * Makefile.in (all, clean, distclean, mostlyclean, realclean,
1235           install): Changed targets so that they descend all
1236           subdirectories in $(SUBDIRS).
1237           (*-all, *-clean, *-install): Removed targets.
1238
1239         * configure.in: Don't bother with target makefile fragments, they
1240           are no longer needed.
1241         * configure: regenerated.
1242
1243         * Makefile.in, configure.in: converted to autoconf.
1244         * configure: New file, generated with autconf 2.4.
1245
1246 Wed May 24 14:48:46 1995  Steve Chamberlain  <sac@slash.cygnus.com>
1247
1248         * Makefile.in: Support ARM.
1249         * configure.in: Ditto.
1250
1251 Sun Jan 15 16:53:47 1995  Steve Chamberlain  <sac@splat>
1252
1253         * Makefile.in: Support W65.
1254         * configure.in: Ditto.
1255
1256 Sun Mar 13 09:27:50 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
1257
1258         * Makefile.in: Add TAGS target.
1259
1260 Mon Sep 13 12:47:15 1993  K. Richard Pixley  (rich@sendai.cygnus.com)
1261
1262         * Makefile.in (all-z8k, install-z8k, clean-z8k, all-h8300,
1263           install-h8300, clean-h8300, all-h8500, install-h8500,
1264           clean-h8500, all-sh, install-sh, clean-sh): do not echo
1265           recursion lines.
1266
1267 Wed Jun 30 14:12:05 1993  david d `zoo' zuhn  (zoo at poseidon.cygnus.com)
1268
1269         * Makefile.in: remove endian.h trace from h8500
1270
1271 Sun Jun 13 13:08:58 1993  Jim Kingdon  (kingdon@cygnus.com)
1272
1273         * Makefile.in: Add distclean, realclean, and mostlyclean targets.
1274
1275 Fri May 21 11:21:16 1993  david d `zoo' zuhn  (zoo at cirdan.cygnus.com)
1276
1277         * Makefile.in: make all of the all-* target (except all-nothing)
1278         depend on endian.h, so that if we're not building a simulator, we
1279         don't built endian
1280
1281 Fri May 21 10:55:06 1993  Ian Lance Taylor  (ian@cygnus.com)
1282
1283         * Makefile.in (check, installcheck): Added dummy targets.
1284
1285 Mon May  3 21:39:43 1993  Fred Fish  (fnf@cygnus.com)
1286
1287         * Makefile.in (endian): Find endian.c in $(srcdir), and also
1288         explicitly make it, since some makes apparently don't work with
1289         VPATH and .c to executable rules (SunOS make for example).
1290
1291 Mon May  3 08:29:01 1993  Steve Chamberlain  (sac@thepub.cygnus.com)
1292
1293         * Makefile.in (endian): Add explicit rule for broken makes.
1294
1295 Mon Mar 15 15:47:53 1993  Ian Lance Taylor  (ian@cygnus.com)
1296
1297         * Makefile.in (info, install-info): New targets.
1298         (DO_INSTALL): Renamed from INSTALL, which is overridden by the top
1299         level Makefile.
1300
1301 Wed Feb 10 20:12:27 1993  K. Richard Pixley  (rich@ok.cygnus.com)
1302
1303         * Makefile.in (endian.h): build endian.h via a temporary file so
1304           that we don't leave an incomplete file lying around on
1305           interrupted builds.
1306           (clean): remove endian, e.h, and endian.h.
1307
1308 Mon Feb  8 11:46:06 1993  Steve Chamberlain  (sac@thepub.cygnus.com)
1309
1310         * Makefile.in, configure.in: if target isn't supported, build a
1311         harmless makefile.
1312
1313