sim/ChangeLog

   1 2019-09-18  Alan Modra  <amodra@gmail.com>
   2
   3         * common/sim-load.c, * common/sim-utils.c, * cris/sim-if.c,
   4         * erc32/func.c, * lm32/sim-if.c, * m32c/load.c, * m32c/trace.c,
   5         * m68hc11/interp.c, * ppc/hw_htab.c, * ppc/hw_init.c,
   6         * rl78/load.c, * rl78/trace.c, * rx/gdb-if.c, * rx/load.c,
   7         * rx/trace.c: Update throughout for bfd section macro changes.
   8
   9 2019-06-13  Stafford Horne  <shorne@gmail.com>
  10
  11         * or1k/cpu.c: Regenerate.
  12         * or1k/cpu.h: Regenerate.
  13         * or1k/decode.c: Regenerate.
  14         * or1k/decode.h: Regenerate.
  15         * or1k/model.c: Regenerate.
  16         * or1k/sem-switch.c: Regenerate.
  17         * or1k/sem.c: Regenerate.
  18
  19 2019-02-28  Joel Brobecker  <brobecker@adacore.com>
  20
  21         * MAINTAINERS: Move Mike Frysinger to past maintainers' section.
  22
  23 2019-02-13  Simon Marchi  <simon.marchi@ericsson.com>
  24
  25         * MAINTAINERS: Add Andrew Burgess as global maintainer.
  26
  27 2019-01-03  Pavel I. Kryukov  <kryukov@frtk.ru>
  28
  29         * sim-base.h: Add 'extern C' if header is compiled with C++.
  30
  31 2018-12-06  Andrew Burgess  <andrew.burgess@embecosm.com>
  32
  33         * common/acinclude.m4 (enable-cgen-maint): Support passing path to
  34         cgen source tree.
  35         * cris/configure: Regenerate.
  36         * frv/configure: Regenerate.
  37         * iq2000/configure: Regenerate.
  38         * lm32/configure: Regenerate.
  39         * m32r/configure: Regenerate.
  40         * or1k/configure: Regenerate.
  41         * sh64/configure: Regenerate.
  42
  43 2018-10-05  Stafford Horne  <shorne@gmail.com>
  44
  45         * or1k/cpu.h: Regenerate.
  46         * or1k/decode.c: Regenerate.
  47         * or1k/decode.h: Regenerate.
  48         * or1k/model.c: Regenerate.
  49         * or1k/sem-switch.c: Regenerate.
  50         * or1k/sem.c: Regenerate:
  51
  52 2018-07-20  Maciej W. Rozycki  <macro@mips.com>
  53
  54         * MAINTAINERS: Update my e-mail address, downgrade to MIPS I-IV
  55         ISA maintenance.
  56
  57 2018-07-19  DJ Delorie  <dj@redhat.com>
  58
  59         * MAINTAINERS (rl78, m32c, rx, v850): Remove myself as maintainer.
  60
  61 2018-07-14  Stafford Horne  <shorne@gmail.com>
  62
  63         * MAINTAINERS (or1k): Add myself as or1k maintainer.
  64
  65 2018-06-19  Simon Marchi  <simon.marchi@ericsson.com>
  66
  67         * All configure.ac: Remove AC_PREREQ.
  68         * All configure: Re-generate.
  69
  70 2018-01-22  Maciej W. Rozycki  <macro@mips.com>
  71
  72         * MAINTAINERS: Update my company e-mail address.
  73
  74 2017-12-12  Stafford Horne  <shorne@gmail.com>
  75             Peter Gavin  <pgavin@gmail.com>
  76
  77         * configure: Regenerated.
  78         * or1k/aclocal.m4: Generated.
  79         * or1k/config.in: Generated.
  80         * or1k/configure: Generated.
  81
  82 2017-12-12  Stafford Horne  <shorne@gmail.com>
  83             Peter Gavin  <pgavin@gmail.com>
  84
  85         * or1k/arch.c: Generated.
  86         * or1k/arch.h: Generated.
  87         * or1k/cpu.c: Generated.
  88         * or1k/cpu.h: Generated.
  89         * or1k/cpuall.h: Generated.
  90         * or1k/decode.c: Generated.
  91         * or1k/decode.h: Generated.
  92         * or1k/model.c: Generated.
  93         * or1k/sem-switch.c: Generated.
  94         * or1k/sem.c: Generated.
  95
  96 2017-12-12  Stafford Horne  <shorne@gmail.com>
  97             Peter Gavin  <pgavin@gmail.com>
  98
  99         * configure.tgt: Add or1k sim.
 100         * or1k/README: New file.
 101         * or1k/Makefile.in: New file.
 102         * or1k/configure.ac: New file.
 103         * or1k/mloop.in: New file.
 104         * or1k/or1k-sim.h: New file.
 105         * or1k/or1k.c: New file.
 106         * or1k/sim-if.c: New file.
 107         * or1k/sim-main.h: New file.
 108         * or1k/traps.c: New file.
 109
 110 2017-11-01  James Bowman  <james.bowman@ftdichip.com>
 111
 112         * ft32/interp.c (step_once): Add ft32 shortcode decoder.
 113
 114 2017-10-12  James Bowman  <james.bowman@ftdichip.com>
 115
 116         * ft32/interp.c (step_once): Replace FT32_FLD_K8 with K15.
 117
 118 2017-10-12  James Bowman  <james.bowman@ftdichip.com>
 119
 120         * MAINTAINERS (ft32): Add myself.
 121
 122 2017-10-03  Jim Wilson  <wilson@tuliptree.org>
 123
 124         * MAINTAINERS (aarch64): Update my email address.
 125
 126 2017-09-06  John Baldwin  <jhb@FreeBSD.org>
 127
 128         * configure.ac: Honor existing CC_FOR_BUILD in environment.
 129         * configure: Regenerate.
 130
 131 2017-02-14  Jim Wilson  <jim.wilson@linaro.org>
 132
 133         * MAINTAINTERS (aarch64): Add myself.
 134
 135 2016-12-14  Maciej W. Rozycki  <macro@imgtec.com>
 136
 137         * MAINTAINERS (Maintainers for particular sims): Add myself as
 138         a MIPS maintainer.
 139
 140 2016-02-03  Maciej W. Rozycki  <macro@linux-mips.org>
 141
 142         * MAINTAINERS (Past sim maintainers): Add Thiemo Seufer.
 143
 144 2016-01-09  Mike Frysinger  <vapier@gentoo.org>
 145
 146         * configure.ac: Delete sim_common check and the
 147         AC_CONFIG_SUBDIRS(common) call.
 148         * configure: Regenerate.
 149         * configure.tgt (sim_common): Delete the variable.
 150
 151 2016-01-09  Mike Frysinger  <vapier@gentoo.org>
 152
 153         * .gitignore: Delete /common/cconfig.h entry.
 154
 155 2016-01-05  Nick Clifton  <nickc@redhat.com>
 156
 157         * MAINTAINERS: Add myself as AArch64 sim maintainer.
 158
 159 2015-12-09  Tristan Gingold  <gingold@adacore.com>
 160
 161         * aarch64/simulator.c: Remove syscall.h include.
 162
 163 2015-12-26  Mike Frysinger  <vapier@gentoo.org>
 164
 165         * README-HACKING: Delete mention of tconfig.h.
 166
 167 2015-11-24  Nick Clifton  <nickc@redhat.com>
 168
 169         * configure.tgt: Add aarch64 entry.
 170         * configure: Regenerate.
 171
 172 2015-06-23  Mike Frysinger  <vapier@gentoo.org>
 173
 174         * configure.ac (AC_ARG_ENABLE(sim)): Call AS_HELP_STRING.
 175         * configure: Regenerate.
 176
 177 2015-06-12  Mike Frysinger  <vapier@gentoo.org>
 178
 179         * README-HACKING: Change configure.in to configure.ac.
 180
 181 2015-04-02  H.J. Lu  <hongjiu.lu@intel.com>
 182
 183         * arm/configure: Regenerated.
 184         * avr/configure: Likewise.
 185         * bfin/configure: Likewise.
 186         * common/configure: Likewise.
 187         * cr16/configure: Likewise.
 188         * cris/configure: Likewise.
 189         * d10v/configure: Likewise.
 190         * erc32/configure: Likewise.
 191         * frv/configure: Likewise.
 192         * ft32/configure: Likewise.
 193         * h8300/configure: Likewise.
 194         * igen/configure: Likewise.
 195         * iq2000/configure: Likewise.
 196         * lm32/configure: Likewise.
 197         * m32c/configure: Likewise.
 198         * m32r/configure: Likewise.
 199         * m68hc11/configure: Likewise.
 200         * mcore/configure: Likewise.
 201         * microblaze/configure: Likewise.
 202         * mips/configure: Likewise.
 203         * mn10300/configure: Likewise.
 204         * moxie/configure: Likewise.
 205         * msp430/configure: Likewise.
 206         * ppc/configure: Likewise.
 207         * rl78/configure: Likewise.
 208         * rx/configure: Likewise.
 209         * sh/configure: Likewise.
 210         * sh64/configure: Likewise.
 211         * v850/configure: Likewise.
 212
 213 2015-04-01  H.J. Lu  <hongjiu.lu@intel.com>
 214
 215         * common/Make-common.in (CSEARCH): Remove $(ZLIBINC).
 216         (BFD_LIB): Remove $(ZLIB).
 217         (CONFIG_LIBS): Add $(ZLIB).
 218         * ppc/Makefile.in (ZLIBINC): Removed.
 219         (INCLUDES): Remove $(ZLIBINC).
 220         (BFD_LIB): Remove $(ZLIB).
 221
 222 2015-04-01  H.J. Lu  <hongjiu.lu@intel.com>
 223
 224         * arm/configure: Regenerated.
 225         * avr/configure: Likewise.
 226         * bfin/configure: Likewise.
 227         * common/configure: Likewise.
 228         * cr16/configure: Likewise.
 229         * cris/configure: Likewise.
 230         * d10v/configure: Likewise.
 231         * erc32/configure: Likewise.
 232         * frv/configure: Likewise.
 233         * ft32/configure: Likewise.
 234         * h8300/configure: Likewise.
 235         * igen/configure: Likewise.
 236         * iq2000/configure: Likewise.
 237         * lm32/configure: Likewise.
 238         * m32c/configure: Likewise.
 239         * m32r/configure: Likewise.
 240         * m68hc11/configure: Likewise.
 241         * mcore/configure: Likewise.
 242         * microblaze/configure: Likewise.
 243         * mips/configure: Likewise.
 244         * mn10300/configure: Likewise.
 245         * moxie/configure: Likewise.
 246         * msp430/configure: Likewise.
 247         * ppc/configure: Likewise.
 248         * rl78/configure: Likewise.
 249         * rx/configure: Likewise.
 250         * sh/configure: Likewise.
 251         * sh64/configure: Likewise.
 252         * v850/configure: Likewise.
 253
 254 2015-03-29  Mike Frysinger  <vapier@gentoo.org>
 255
 256         * configure: Regenerate.
 257         * configure.ac: Delete sim_testsuite check and config in testsuite.
 258         * configure.tgt (sim_testsuite): Delete everywhere.
 259
 260 2015-03-28  Mike Frysinger  <vapier@gentoo.org>
 261
 262         * configure: Regenerate.
 263         * configure.tgt (avr*-*-*): Set sim_testsuite=yes.
 264
 265 2015-03-28  James Bowman  <james.bowman@ftdichip.com>
 266
 267         * configure.tgt: Add FT32 entry.
 268         * configure: Regenerate.
 269
 270 2015-03-16  Mike Frysinger  <vapier@gentoo.org>
 271
 272         * .gitignore: Delete tconfig.h.
 273         * README-HACKING: Change tconfig.in to tconfig.h.
 274
 275 2014-03-12  Nick Clifton  <nickc@redhat.com>
 276
 277         * MAINTAINERS: Add myself as the maintainer for the MSP430.
 278
 279 2014-03-10  Mike Frysinger  <vapier@gentoo.org>
 280
 281         * configure.tgt (msp430*-*-*): Set sim_testsuite to yes.
 282         * configure: Regenerate.
 283
 284 2014-01-06  Tom Tromey  <tromey@redhat.com>
 285
 286         * common/cgen-trace.c: Don't use old VA_* macros.
 287         * common/sim-load.c (xprintf): Likewise.
 288         * common/sim-trace.c (trace_printf, debug_printf): Likewise.
 289
 290 2014-01-06  Tom Tromey  <tromey@redhat.com>
 291
 292         * README-HACKING: Don't use PARAMS.
 293         * arm/wrapper.c: Don't use PARAMS.
 294         * bfin/sim-main.h: Don't use PARAMS.
 295         * common/callback.c: Don't use PARAMS.
 296         * common/cgen-trace.c: Don't use PARAMS.
 297         * common/run-sim.h: Don't use PARAMS.
 298         * common/run.c: Don't use PARAMS.
 299         * common/sim-base.h: Don't use PARAMS.
 300         * common/sim-load.c: Don't use PARAMS.
 301         * common/sim-options.h: Don't use PARAMS.
 302         * common/sim-trace.c: Don't use PARAMS.
 303         * common/sim-trace.h: Don't use PARAMS.
 304         * common/sim-utils.h: Don't use PARAMS.
 305         * cr16/cr16_sim.h: Don't use PARAMS.
 306         * cr16/gencode.c: Don't use PARAMS.
 307         * cr16/interp.c: Don't use PARAMS.
 308         * cr16/simops.c: Don't use PARAMS.
 309         * d10v/d10v_sim.h: Don't use PARAMS.
 310         * d10v/gencode.c: Don't use PARAMS.
 311         * d10v/interp.c: Don't use PARAMS.
 312         * d10v/simops.c: Don't use PARAMS.
 313         * erc32/erc32.c: Don't use PARAMS.
 314         * erc32/exec.c: Don't use PARAMS.
 315         * erc32/float.c: Don't use PARAMS.
 316         * erc32/func.c: Don't use PARAMS.
 317         * erc32/sis.c: Don't use PARAMS.
 318         * erc32/sis.h: Don't use PARAMS.
 319         * mips/interp.c: Don't use PARAMS.
 320         * mips/sim-main.h: Don't use PARAMS.
 321         * sh/interp.c: Don't use PARAMS.
 322         * v850/sim-main.h: Don't use PARAMS.
 323         * v850/v850_sim.h: Don't use PARAMS.
 324
 325 2013-11-07  Will Newton  <will.newton@linaro.org>
 326
 327         PR gdb/15508
 328         * arm/wrapper.c (sim_create_inferior): Call init before
 329         accessing STATE.
 330
 331 2013-11-07  Will Newton  <will.newton@linaro.org>
 332
 333         PR gdb/8989
 334         * arm/wrapper.c (sim_create_inferior): Avoid calling
 335         bfd_get_mach with a NULL bfd.
 336
 337 2013-06-21  Nick Clifton  <nickc@redhat.com>
 338
 339         * msp430: New Directory.
 340         * configure.tgt: Add it.
 341         * configure: Regenerate.
 342
 343 2013-03-15  Steve Ellcey  <sellcey@mips.com>
 344
 345         * arm/wrapper.c (sim_complete_command): Make char arguments const.
 346         * avr/interp.c (sim_complete_command): Ditto.
 347         * common/sim-options.c (sim_complete_command): Ditto.
 348         * cr16/interp.c (sim_complete_command): Ditto.
 349         * erc32/interf.c (sim_complete_command): Ditto.
 350         * m32c/gdb-if.c (sim_complete_command): Ditto.
 351         * microblaze/interp.c (sim_complete_command): Ditto.
 352         * ppc/sim_calls.c (sim_complete_command): Ditto.
 353         * rl78/gdb-if.c (sim_complete_command): Ditto.
 354         * rx/gdb-if.c (sim_complete_command): Ditto.
 355         * sh/interp.c (sim_complete_command): Ditto.
 356
 357 2013-01-01  Joel Brobecker  <brobecker@adacore.com>
 358
 359         Update year range in copyright notice of all files.
 360
 361 2012-12-19  Joel Brobecker  <brobecker@adacore.com>
 362
 363         Update old contact info in GPL license notices.
 364
 365 2012-12-19  Joel Brobecker  <brobecker@adacore.com>
 366
 367         Update the non-FSF-copyrighted files in sim to GPLv3 or later.
 368
 369 2012-11-20  Pavel Chupin  <pavel.v.chupin@intel.com>
 370
 371         * common/Make-common.in: Use lt_cv_dlopen_libs under PLUGINS
 372         condition.
 373         * common/acinclude.m4: Define lt_cv_dlopen_libs.
 374         * arm/configure: Regenerate.
 375         * avr/configure: Regenerate.
 376         * bfin/configure: Regenerate.
 377         * common/configure: Regenerate.
 378         * cr16/configure: Regenerate.
 379         * cris/configure: Regenerate.
 380         * d10v/configure: Regenerate.
 381         * erc32/configure: Regenerate.
 382         * frv/configure: Regenerate.
 383         * h8300/configure: Regenerate.
 384         * igen/configure: Regenerate.
 385         * iq2000/configure: Regenerate.
 386         * lm32/configure: Regenerate.
 387         * m32c/configure: Regenerate.
 388         * m32r/configure: Regenerate.
 389         * m68hc11/configure: Regenerate.
 390         * mcore/configure: Regenerate.
 391         * microblaze/configure: Regenerate.
 392         * mips/configure: Regenerate.
 393         * mn10300/configure: Regenerate.
 394         * moxie/configure: Regenerate.
 395         * ppc/configure: Regenerate.
 396         * rl78/configure: Regenerate.
 397         * rx/configure: Regenerate.
 398         * sh/configure: Regenerate.
 399         * sh64/configure: Regenerate.
 400         * testsuite/configure: Regenerate.
 401         * v850/configure: Regenerate.
 402
 403 2012-11-05  Stephane Carrez  <Stephane.Carrez@gmail.com>
 404
 405         * MAINTAINERS: Update my email address.
 406
 407 2012-09-24  Steve Ellcey  <sellcey@mips.com>
 408
 409         * mips/basic.exp: Add mips*-mti-elf* target.
 410         * configure.ac: Add mips*-mti-elf* target.
 411         * configure: Regenerate.
 412
 413 2012-06-15  Joel Brobecker  <brobecker@adacore.com>
 414
 415         * configure: Regenerate.
 416
 417 2012-06-06  Michael Eager  <eager@eagercon.com>
 418
 419         * microblaze/interp.c (config.h): Add #include.
 420
 421 2011-11-29  Joel Brobecker  <brobecker@adacore.com>
 422
 423         * MAINTAINERS (Global Maintainers): New section.  Add Mike
 424         Frysinger.
 425
 426 2011-11-28  DJ Delorie  <dj@redhat.com>
 427
 428         * configure.tgt: Add rl78 support.
 429         * configure: Regenerate.
 430         * rl78: New directory.
 431         * MAINTAINERS: Add myself as RL78 maintainer.
 432
 433 2011-07-08  Hans-Peter Nilsson  <hp@axis.com>
 434
 435         * MAINTAINERS: Remove Thiemo Seufer.
 436
 437 2011-06-04  Mike Frysinger  <vapier@gentoo.org>
 438
 439         * configure.tgt (bfin-*-*): Add sim_testsuite=yes.
 440         * configure: Regenerate.
 441
 442 2011-05-04  Joseph Myers  <joseph@codesourcery.com>
 443
 444         * configure.tgt (thumb*-*-* | strongarm*-*-* | xscale-*-*): Don't
 445         handle targets.
 446         * configure: Regenerate.
 447
 448 2011-03-05  Mike Frysinger  <vapier@gentoo.org>
 449
 450         * MAINTAINERS: Add bfin entry.
 451         * configure.tgt (bfin-*-*): Handle bfin targets.
 452         * configure: Regenerate.
 453
 454 2011-01-05  Mike Frysinger  <vapier@gentoo.org>
 455
 456         * .gitignore: Add /*/hw-config.h.
 457
 458 2010-12-23  Mike Frysinger  <vapier@gentoo.org>
 459
 460         * .gitignore: New file.
 461
 462 2010-07-28  DJ Delorie  <dj@redhat.com>
 463
 464         * MAINTAINERS: Add self as RX maintainer.  Sort list.
 465
 466 2010-06-08  Nick Clifton  <nickc@redhat.com>
 467
 468         * reg.c (set_oszc): Use unsigned int for the mask.
 469         (set_szc, set_osz, set_sz): Likewise.
 470
 471 2010-04-26  Mike Frysinger  <vapier@gentoo.org>
 472
 473         * configure.ac: Target logic moved out to and included from ...
 474         * configure.tgt: ... this new file.
 475         * configure: Regenerated.
 476
 477 2010-04-12  Mike Frysinger  <vapier@gentoo.org>
 478
 479         * README-HACKING: Add more sections.
 480
 481 2010-02-11  Doug Evans  <dje@sebabeach.org>
 482
 483         * cris/cpuv10.h, * cris/cpuv32.h, * cris/cris-desc.c,
 484         * cris/cris-desc.h, * cris/decodev10.c, * cris/decodev32.c,
 485         * cris/modelv10.c, * cris/modelv32.c, * cris/semcrisv10f-switch.c,
 486         * cris/semcrisv32f-switch.c: Regenerate.
 487
 488 2010-01-09  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
 489
 490         * avr/configure: Regenerate.
 491         * cris/configure: Regenerate.
 492         * microblaze/configure: Regenerate.
 493
 494 2010-01-02  Doug Evans  <dje@sebabeach.org>
 495
 496         * cris/arch.c, * cris/arch.h, * cris/cpuall.h, * cris/cpuv10.c,
 497         * cris/cpuv10.h, * cris/cpuv32.c, * cris/cpuv32.h, * cris/cris-desc.c,
 498         * cris/cris-desc.h, * cris/cris-opc.h, * cris/decodev10.c,
 499         * cris/decodev10.h, * cris/decodev32.c, * cris/decodev32.h,
 500         * cris/modelv10.c, * cris/modelv32.c, * cris/semcrisv10f-switch.c,
 501         * cris/semcrisv32f-switch.c: Regenerate, update copyright year.
 502
 503 2010-01-01  Doug Evans  <dje@sebabeach.org>
 504
 505         * cris/mloop.in: Fix copyright year update snafu.
 506
 507 2009-11-24  Joel Brobecker  <brobecker@adacore.com>
 508
 509         * common/aclocal.m4: Add include of ../../config/zlib.m4.
 510         * common/common.m4: Use AM_ZLIB to check for zlib support.
 511         * ppc/configure.ac: Likewise.
 512         * arm/configure, avr/configure, common/configure, cr16/configure,
 513         cris/configure, d10v/configure, erc32/configure, frv/configure,
 514         h8300/configure, iq2000/configure, lm32/configure, m32c/configure,
 515         m32r/configure, m68hc11/configure, mcore/configure,
 516         microblaze/configure, mips/configure, mn10300/configure,
 517         moxie/configure, ppc/configure, sh/configure, sh64/configure,
 518         v850/configure: Regenerate.
 519
 520 2009-11-24  DJ Delorie  <dj@redhat.com>
 521
 522         * rx: New directory.
 523         * configure.ac: Add entry for Renesas RX.
 524         * configure: Regenerate.
 525
 526 2009-11-22  Doug Evans  <dje@sebabeach.org>
 527
 528         * cris/cpuall.h: Regenerate.
 529         * cris/cpuv10.h: Regenerate.
 530         * cris/cpuv32.h: Regenerate.
 531         * cris/decodev10.c: Regenerate.
 532         * cris/decodev10.h: Regenerate.
 533         * cris/decodev32.c: Regenerate.
 534         * cris/decodev32.h: Regenerate.
 535
 536 2009-11-12  Tristan Gingold  <gingold@adacore.com>
 537
 538         * avr/interp.c (sim_write): Allow byte access.
 539         (sim_read): Ditto.
 540
 541 2009-11-12  Tristan Gingold  <gingold@adacore.com>
 542
 543         * avr/interp.c (sim_load): Clear memory before loading.
 544
 545 2009-11-09  Tristan Gingold  <gingold@adacore.com>
 546
 547         * avr/interp.c (sim_resume): Fix typo for OP_ret.
 548
 549 2009-10-23  Doug Evans  <dje@sebabeach.org>
 550
 551         * cris/arch.c: Regenerate.
 552         * cris/arch.h: Regenerate.
 553         * cris/cpuall.h: Regenerate.
 554         * cris/cpuv10.c: Regenerate.
 555         * cris/cpuv10.h: Regenerate.
 556         * cris/cpuv32.c: Regenerate.
 557         * cris/cpuv32.h: Regenerate.
 558         * cris/cris-desc.c: Regenerate.
 559         * cris/cris-desc.h: Regenerate.
 560         * cris/cris-opc.h: Regenerate.
 561         * cris/decodev10.c: Regenerate.
 562         * cris/decodev10.h: Regenerate.
 563         * cris/decodev32.c: Regenerate.
 564         * cris/decodev32.h: Regenerate.
 565         * cris/modelv10.c: Regenerate.
 566         * cris/modelv32.c: Regenerate.
 567         * cris/semcrisv10f-switch.c: Regenerate.
 568         * cris/semcrisv32f-switch.c: Regenerate.
 569
 570 2009-10-22  Tristan Gingold  <gingold@adacore.com>
 571
 572         * avr/interp.c (sim_stop): Return 1.
 573
 574 2009-10-16  Doug Evans  <dje@sebabeach.org>
 575
 576         * MAINTAINERS: Add myself as m32r maintainer.
 577
 578 2009-10-15  Michael Egaer  <eager@eagercon.com>
 579
 580         * MAINTAINERS: Add self as MicroBlaze maintainer.
 581
 582 2009-10-14  Ben Elliston  <bje@gnu.org>
 583
 584         * MAINTAINERS (common): Move myself to "past maintainers" section.
 585
 586 2009-10-06  Michael Eager  <eager@eagercon.com>
 587
 588         * microblaze/interp.c: Add include microblaze-dis.h.
 589
 590 2009-09-23  Michael Eager  <eager@eagercon.com>
 591
 592         * configure: Add microblaze-*.* (not regenerated).
 593         * configure.ac: Likewise.
 594         * microblaze/config.in: New.
 595         * microblaze/configure: Generate.
 596         * microblaze/configure.ac: New.
 597         * microblaze/interp.c: New.
 598         * microblaze/Makefile.in: New.
 599         * microblaze/microblaze.h: New.
 600         * microblaze/microblaze.isa: New.
 601         * microblaze/sim-main.h: New.
 602         * microblaze/sysdep.h: New.
 603
 604 2009-08-22  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
 605
 606         * avr/config.in: Regenerate.
 607         * avr/configure: Likewise.
 608         * configure: Likewise.
 609         * cris/config.in: Likewise.
 610         * cris/configure: Likewise.
 611
 612         * configure.ac: m4_include toplevel config/override.m4.
 613         * configure: Regenerate.
 614         * avr/configure: Regenerate.
 615         * cris/configure: Regenerate.
 616
 617 2009-07-30  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
 618
 619         * Makefile.in (datarootdir): New variable.
 620
 621 2009-05-18  Jon Beniston <jon@beniston.com>
 622
 623         * MAINTAINERS: Add Jon Beniston as maintainer of lm32 sim.
 624         * configure.ac: Add lm32 target.
 625         * lm32: New directory.
 626
 627 2009-05-11  Andrew Cagney  <cagney@gnu.org>
 628
 629         * MAINTAINERS: Orphan ppc.
 630
 631 2009-05-08  Kevin Buettner  <kevinb@redhat.com>
 632
 633         * m32c/gdb-if.c (m32c_signal_to_host): Rename to
 634         m32c_signal_to_target.  Change signal return values from SIGILL,
 635         SIGTRAP, SIGSEGV, etc. to TARGET_SIGNAL_ILL, TARGET_SIGNAL_TRAP,
 636         TARGET_SIGNAL_SEGV, etc.  Fix all callers.
 637
 638 2009-04-30  Anthony Green  <green@moxielogic.com>
 639
 640         * MAINTAINERS: Add myself for the moxie port.
 641         * moxie: New directory.
 642         * configure.ac: Add entry for moxie.
 643         * configure: Regenerate.
 644
 645 2009-04-27  Tristan Gingold  <gingold@adacore.com>
 646
 647         * avr: New directory.
 648         * avr/interp.c, avr/Makefile.in, avr/configure.ac: New files.
 649         * avr/config.in: New file, generated by autoheader.
 650         * avr/configure: New file generated by autoconf.
 651         * configure.ac: Add avr.
 652         * configure: Regenerated.
 653
 654 2009-04-17  Carlos O'Donell  <carlos@codesourcery.com>
 655
 656         * Makefile.in: Add dummy install-pdf, html, and
 657         install-html targets.
 658
 659 2009-01-18  Hans-Peter Nilsson  <hp@axis.com>
 660
 661         * cris/sim-if.c: Include errno.h.
 662         (cris_start_address, cris_program_offset): New variables.
 663         (OPTION_CRIS_PROGRAM_OFFSET, OPTION_CRIS_STARTADDR): New option
 664         enums.
 665         (cris_options): New options --cris-program-offset and
 666         --cris-start-address.
 667         (cris_option_handler): Handle new options.
 668         (cris_program_offset_write, cris_set_section_offset_iterator)
 669         (cris_offset_sections, cris_offset_sections): New functions.
 670         (sim_load): Use cris_program_offset_write as function argument to
 671         cris_load_elf_file, not sim_write.
 672         (struct offsetinfo): New struct.
 673         (cris_handle_interpreter): Fix typo in comment.
 674         (sim_open): Call cris_offset_sections as soon as the bfd of the
 675         infile is available.  Gate bfd validity checks on abfd non-NULL.
 676         (sim_create_inferior): Let cris_start_address when != -1 override
 677         other start-address choices.
 678
 679 2009-01-06  Hans-Peter Nilsson  <hp@axis.com>
 680
 681         * cris/traps.c (abort): Define to call sim_io_error.
 682         (create_map): Make -1 imply a non-fixed address, not 0.  All
 683         callers changed.  Only prefer the next higher unmapped address if
 684         the last mapped address is no less than 0x40000000.  Check that
 685         the address to be mapped is not already mapped.  Update head
 686         comment.
 687         (unmap_pages): Don't call abort when recursive call fails, just
 688         note and return an error if a page in the range couldn't be unmapped.
 689         (cris_bmod_handler, h_supr_set_handler, h_supr_get_handler)
 690         (schedule, make_first_thread, cris_pipe_empty): New local variable sd.
 691         (cris_break_13_handler) <case TARGET_SYS_mmap2>: Handle
 692         non-MAP_FIXED argument overlapping existing map.  For MAP_FIXED,
 693         don't abort on page not being mapped.  Handle non-anon filemap
 694         with length padded to pagesize.
 695
 696 2009-01-03  Hans-Peter Nilsson  <hp@axis.com>
 697
 698         * cris/sim-if.c (TARGET_AT_NULL, TARGET_AT_PHDR, TARGET_AT_PHENT)
 699         (TARGET_AT_PHNUM, TARGET_AT_PAGESZ, TARGET_AT_BASE)
 700         (TARGET_AT_FLAGS, TARGET_AT_ENTRY, TARGET_AT_UID, TARGET_AT_EUID)
 701         (TARGET_AT_GID, TARGET_AT_EGID, TARGET_AT_HWCAP)
 702         (TARGET_AT_CLKTCK): Remove redundant macros.
 703         (AUX_ENT): Adjust to use standard ELF AT_* macros.
 704         (AUX_ENTF): Ditto.  Remove always-0 middle argument.  Update all
 705         callers.
 706         (sim_open): Also pass AT_SECURE.
 707
 708         * cris/sim-main.h (struct _sim_cpu): New member
 709         set_target_thread_data.
 710         * cris/crisv32f.c (CRIS_TLS_REGISTER): Define.
 711         * cris/crisv10f.c: Ditto.
 712         * cris/cris-tmpl.c (MY (set_target_thread_data)): New function.
 713         (MY (f_specific_init)): Set new _sim_cpu member to new function.
 714         * cris/traps.c (TARGET_SYS_set_thread_area): Define.
 715         (cris_break_13_handler) <case TARGET_SYS_set_thread_area>: New
 716         case.
 717
 718         * cris/traps.c (TARGET_SYS_exit_group): Define.
 719         (cris_break_13_handler): Handle it like the exit for the last
 720         thread.
 721
 722         * cris/traps.c (TARGET_UTSNAME): Update to 2009-01-01.
 723         (TARGET_EPOCH): Update to match TARGET_UTSNAME.  Correct comment.
 724         (cris_break_13_handler) <case TARGET_SYS_uname>: Update to
 725         2.6.27.  Set machine field to the BFD printable name of the
 726         machine.
 727
 728         * cris/traps.c (TARGET_MAP_DENYWRITE): Define.
 729         (cris_break_13_handler) <case TARGET_SYS_mmap2>: Handle
 730         TARGET_MAP_DENYWRITE.
 731
 732         * cris/traps.c (TARGET_SYS_access, TARGET_R_OK, TARGET_W_OK)
 733         (TARGET_X_OK, TARGET_F_OK): Define.
 734         (cris_break_13_handler) <case TARGET_SYS_access>: New case.
 735
 736         * cris/semcrisv32f-switch.c: Regenerate.
 737
 738 2008-12-30  Hans-Peter Nilsson  <hp@axis.com>
 739
 740         * cris/sim-if.c (sim_open): If sim_analyze_program fails, emit
 741         just a short CRIS-specific notice.  Tweak the wording for a
 742         failing architecture test.
 743
 744         * cris/traps.c (TARGET_SYS_writev): New macro.
 745         (is_mapped_only, cris_dump_map): New functions.
 746         (cris_break_13_handler) <case TARGET_SYS_mmap2>: Handle more flags
 747         and prot combinations and a non-zero page-offset.  If
 748         TARGET_MAP_FIXED, unmap pages before mapping them.
 749         <case TARGET_SYS_mprotect>: When checking, allow any length
 750         argument.  Don't actually do anything.
 751         <case TARGET_SYS_writev>: New case.
 752
 753         * cris/Makefile.in (SIM_OBJS): Remove sim-hload.o.
 754         * cris/sim-if.c: Include elf-bfd.h.
 755         (struct progbounds): New members end_loadmem, start_nonloadmem.
 756         (xprintf, eprintf): New functions, copied from common/sim-load.c.
 757         (cris_load_elf_file, sim_load, cris_get_progbounds): New functions.
 758         (get_progbounds_iterator): Renamed from get_progbounds.  Make
 759         static.  Update head comment.  Set new struct progbounds members.
 760         (exec_load_addr, interp_load_addr, interp_start_addr): New static
 761         variables.
 762         (aux_ent_phdr, aux_ent_phent, aux_ent_phnum, aux_ent_base)
 763         (aux_ent_entry, cris_write_interp, cris_handle_interpreter): New
 764         functions.
 765         (sim_open): New constant array auxv_entries.  Rewrite AUX_ENT
 766         handling to use auxv_entries.  Improve error message and checking
 767         for invalid programs.  Use new variable abfd for the program
 768         instead of for each access reaching into sd to get it.
 769         (sim_create_inferior): If non-zero, use interp_start_addr instead
 770         of the program start address.
 771         (cris_disassemble_insn): Remove incorrect and unclear, supposedly
 772         stale comment.  Always specify little-endian.
 773
 774 2008-07-29  Nick Clifton  <nickc@redhat.com>
 775
 776         * common/genmloop.sh: Add new parameter: -shell to specify the
 777         command interpreter to use to run the input file.  This is
 778         necessary because otherwise SHELL is taken from the user's
 779         environment, and not from the makefile that invoked this script
 780         and the user might not be running an sh-like shell.
 781         * cris/Makefile.in: Pass -shell parameter to genmloop.sh.
 782         * fr30/Makefile.in: Likewise.
 783         * frv/Makefile.in: Likewise.
 784         * i960/Makefile.in: Likewise.
 785         * iq2000/Makefile.in: Likewise.
 786         * m32r/Makefile.in: Likewise.
 787
 788         * frv/mloop.in: Add missing start of line comment marker.
 789
 790 2008-07-11  Hans-Peter Nilsson  <hp@axis.com>
 791
 792         * cris/configure: Regenerate to track ../common/common.m4 changes.
 793         * cris/config.in: Ditto.
 794
 795 2008-06-06  Vladimir Prus  <vladimir@codesourcery.com>
 796             Daniel Jacobowitz  <dan@codesourcery.com>
 797             Joseph Myers  <joseph@codesourcery.com>
 798
 799         * cris/configure: Regenerate.
 800
 801 2008-05-09  Olivier Hainque  <hainque@adacore.com>
 802
 803         * ppc/altivec.igen (vperm): Latch inputs into temporaries.
 804
 805 2008-03-25  M R Swami Reddy <MR.Swami.Reddy@nsc.com>
 806
 807         * MAINTAINERS: Add myself as maintainer of cr16 port.
 808
 809 2008-02-12  M Ranga Swami Reddy <MR.Swami.Reddy@nsc.com>
 810
 811         Add simulator for National cr16 processor.
 812         * cr16: New directory.
 813         * configure.ac: Add entry for National cr16.
 814         * configure: Regenerate.
 815
 816 2008-02-05  DJ Delorie  <dj@redhat.com>
 817
 818         * configure.ac (v850): V850 now has a testsuite.
 819         * configure (v850): Likewise.
 820
 821 2008-01-01  Daniel Jacobowitz  <dan@codesourcery.com>
 822
 823         Updated copyright notices for most files.
 824
 825 2007-12-19  DJ Delorie  <dj@redhat.com>
 826
 827         * frv/frv.c (frvbf_cut): Only look at the six LSBs of
 828         cut_point.
 829
 830 2007-10-22  Hans-Peter Nilsson  <hp@axis.com>
 831
 832         * cris/arch.c, cris/arch.h, cris/cpuall.h, cris/cpuv10.c,
 833         cris/cpuv10.h, cris/cpuv32.c, cris/cpuv32.h, cris/cris-desc.c,
 834         cris/cris-desc.h, cris/cris-opc.h, cris/decodev10.c,
 835         cris/decodev10.h, cris/decodev32.c, cris/decodev32.h,
 836         cris/modelv10.c, cris/modelv32.c, cris/semcrisv10f-switch.c,
 837         cris/semcrisv32f-switch.c: Regenerate.
 838
 839 2007-08-24  Joel Brobecker  <brobecker@adacore.com>
 840
 841         Switch the license of all files explicitly copyright the FSF
 842         to GPLv3.
 843
 844 2007-03-27  Brooks Moses  <brooks.moses@codesourcery.com>
 845
 846         * Makefile.in: Add dummy "pdf" target.
 847
 848 2007-02-20  Hans-Peter Nilsson  <hp@axis.com>
 849
 850         * cris/traps.c (dump_statistics): Change format for cycle numbers
 851         to %llu and cast parameters to unsigned long long.
 852
 853 2007-02-16  Thiemo Seufer  <ths@mips.com>
 854
 855         * Makefile.in (FLAGS_TO_PASS, TARGET_FLAGS_TO_PASS): Add RUNTEST.
 856
 857 2007-01-28  Manuel Lauss  <slauss@resi.at>
 858
 859         * configure.ac (sh64-*-*): Change to sh64*-*-*.
 860         (sh-*-*): Change to sh*-*-*.
 861         * configure: Regenerated.
 862
 863 2007-01-09  Daniel Jacobowitz  <dan@codesourcery.com>
 864
 865         Updated copyright notices for most files.
 866
 867 2006-12-20  Hans-Peter Nilsson  <hp@axis.com>
 868
 869         * Makefile.in (autoconf-common autoheader-common): Only run
 870         autoheader on subdirs with a file config.in.
 871
 872         * configure.ac (common): Make the default "yes" for all targets
 873         with sim subdirs.
 874         * configure: Regenerate.
 875
 876         * Makefile.in (autoconf-common autoheader-common): In documented
 877         usage, say SHELL=/bin/sh.
 878         (.PHONY): Add autoheader-common.
 879
 880         * MAINTAINERS: Add self as authorized committer for *.
 881
 882 2006-10-02  Edgar E. Iglesias  <edgar@axis.com>
 883             Hans-Peter Nilsson  <hp@axis.com>
 884
 885         * cris/cris-sim.h (enum cris_unknown_syscall_action_type)
 886         (cris_unknown_syscall_action): Declare.
 887         * cris/sim-if.c (cris_unknown_syscall_action): Define.
 888         (cris_options): Add cris-unknown-syscall option.
 889         (cris_option_handler): Correct comment about and error message for
 890         invalid --cris-cycles argument.  Handle --cris-unknown-syscall.
 891         * cris/traps.c: Include stdarg.h
 892         (cris_unknown_syscall): New function.
 893         (cris_break_13_handler): Instead of sim_io_eprintf and
 894         sim_engine_halt, call cris_unknown_syscall to handle more or less
 895         unknown syscalls.  Adjust code as necessary to handle return
 896         value.
 897
 898 2006-09-30  Daniel Jacobowitz  <dan@codesourcery.com>
 899
 900         * MAINTAINERS: Add Dave Brolley for sh64.
 901
 902 2006-09-30  Hans-Peter Nilsson  <hp@axis.com>
 903
 904         * cris/traps.c (TARGET_PIPE_BUF): New macro.
 905         (cris_pipe_empty): Correct initialization of "remaining".  Only
 906         adjust the "write" return value if more than TARGET_PIPE_BUF bytes
 907         are written.
 908
 909 2006-09-29  Hans-Peter Nilsson  <hp@axis.com>
 910
 911         * cris/configure.ac: Check for limits.h and sys/param.h.
 912         * cris/configure, cris/config.in: Rebuild.
 913         * cris/traps.c (SIM_PATHMAX): New macro.
 914         (cris_break_13_handler): Use SIM_PATHMAX, not MAXPATHLEN.
 915
 916 2006-08-08  Joel Sherrill <joel.sherrill@oarcorp.com>
 917
 918         * configure.ac (sparc-*-rtems*|sparc-*-elf*): Enable erc32 simulator.
 919         * Makefile.in (FLAGS_TO_PASS): Include libdir.
 920         * configure: Regenerated.
 921
 922 2006-06-05  Daniel Jacobowitz  <dan@codesourcery.com>
 923
 924         * cris/configure: Regenerated.
 925
 926 2006-05-31  Daniel Jacobowitz  <dan@codesourcery.com>
 927
 928         * cris/configure: Regenerated.
 929
 930 2006-05-05  Andreas Schwab  <schwab@suse.de>
 931
 932         * configure.ac (CFLAGS_FOR_BUILD): Set and substitute.
 933         * configure: Regenerate.
 934
 935         * Makefile.in (CFLAGS_FOR_BUILD): Define.
 936         (CC_FOR_BUILD): Don't override.
 937         (FLAGS_TO_PASS): Pass CFLAGS_FOR_BUILD.
 938
 939 2006-05-04  Daniel Jacobowitz  <dan@codesourcery.com>
 940
 941         * MAINTAINERS: Add an "Authorized committers" section, and list
 942         DJ Delorie for v850.
 943
 944 2006-04-08  Hans-Peter Nilsson  <hp@axis.com>
 945
 946         * cris/crisv32f.c (MY (deliver_interrupt)): Set CCS to new_ccs.
 947
 948 2006-04-03  Hans-Peter Nilsson  <hp@axis.com>
 949
 950         * cris/dv-cris.c, cris/dv-rv.c, cris/rvdummy.c: New files.
 951         * cris/Makefile.in (CONFIG_DEVICES): Remove redundant setting.
 952         (dv-cris.o, dv-rv.o rvdummy$(EXEEXT), rvdummy.o): New rules.
 953         (all): Depend on rvdummy$(EXEEXT).
 954         * cris/configure.ac: Call SIM_AC_OPTION_WARNINGS.  Check for
 955         sys/socket.h and sys/select.h.  Call SIM_AC_OPTION_HARDWARE,
 956         default off.
 957         * cris/configure: Regenerate.
 958         * cris/cris-sim.h (cris_have_900000xxif): Declare here.
 959         (enum cris_interrupt_type, crisv10deliver_interrupt)
 960         (crisv32deliver_interrupt: New declarations.
 961         * cris/cris-tmpl.c [WITH_HW] (MY (f_model_insn_after)): Call
 962         sim_events_tickn and set state-events member work_pending when it's
 963         time for the next event.
 964         [WITH_HW] (MY (f_specific_init)): Set CPU-model-specific
 965         interrupt-delivery function.
 966         * cris/crisv10f.c (MY (deliver_interrupt)): New function.
 967         * cris/crisv32f.c (MY (deliver_interrupt)): New function.
 968         * cris/devices.c: Include hw-device.h.
 969         (device_io_read_buffer) [WITH_HW]: Call hw_io_read_buffer.
 970         (device_io_write_buffer): Only perform 0x900000xx-functions if
 971         cris_have_900000xxif is nonzero.  Else if WITH_HW defined,
 972         call hw_io_write_buffer.  Add return 0 last in function.
 973         * cris/sim-if.c (cris_have_900000xxif): Now global.
 974         (sim_open) [WITH_HW]: Clear deliver_interrupt cpu member.
 975         Force "-model" option, effectively.
 976         * cris/sim-main.h (cris_interrupt_delivery_fn): New type.
 977         (struct _sim_cpu) [WITH_HW]: New member deliver_interrupt.
 978
 979 2006-04-02  Hans-Peter Nilsson  <hp@axis.com>
 980
 981         * cris/Makefile.in (CRISV10F_OBJS): Remove semcrisv10f-switch.o.
 982         (CRISV32F_OBJS): Remove semcrisv32f-switch.o.
 983         (semcrisv10f-switch.o, semcrisv32f-switch.o: Remove dependency rules.
 984
 985 2006-03-13  DJ Delorie  <dj@redhat.com>
 986
 987         * MAINTAINERS: Add self as m32c sim maintainer.
 988
 989 2006-02-23  Hans-Peter Nilsson  <hp@axis.com>
 990
 991         * cris/traps.c (syscall_map): Remove CB_SYS_time / TARGET_SYS_time
 992         mapping.
 993         (cris_break_13_handler) <case TARGET_SYS_time>: New case.
 994
 995 2006-01-23  Jim Blandy  <jimb@redhat.com>
 996
 997         Add simulator for Renesas M32C and M16C.
 998
 999         * m32c: New directory.
1000         * configure.ac: Add entry for Renesas M32C.
1001         * configure: Regenerate.
1002
1003 2006-01-10  Hans-Peter Nilsson  <hp@axis.com>
1004
1005         * cris/cris-tmpl.c (MY (f_model_insn_before)): Only display basic
1006         cycle count for the current insn.
1007
1008 2005-12-06  Hans-Peter Nilsson  <hp@axis.com>
1009
1010         * cris/cpuv10.h, cris/cpuv32.h, cris/cris-desc.c, cris/cris-opc.h,
1011         cris/decodev10.c, cris/decodev10.h, cris/decodev32.c,
1012         cris/decodev32.h, cris/modelv10.c, cris/modelv32.c,
1013         cris/semcrisv10f-switch.c, cris/semcrisv32f-switch.c: Regenerate.
1014
1015 2005-12-05  Hans-Peter Nilsson  <hp@axis.com>
1016
1017         * cris/arch.c, cris/arch.h, cris/cpuall.h, cris/cpuv10.c,
1018         cris/cpuv10.h, cris/cpuv32.c, cris/cpuv32.h, cris/cris-desc.c,
1019         cris/cris-desc.h, cris/cris-opc.h, cris/decodev10.c,
1020         cris/decodev10.h, cris/decodev32.c, cris/decodev32.h,
1021         cris/modelv10.c, cris/modelv32.c, cris/semcrisv10f-switch.c,
1022         cris/semcrisv32f-switch.c: Regenerate.
1023
1024 2005-11-20  Hans-Peter Nilsson  <hp@axis.com>
1025
1026         * cris/traps.c (TARGET_O_RDONLY, TARGET_O_WRONLY): Define.
1027         (open_map): Use TARGET_O_ACCMODE, TARGET_O_RDONLY and
1028         TARGET_O_WRONLY.
1029         (cris_break_13_handler) <case TARGET_SYS_fcntl>: Add support for
1030         F_GETFL on fd 0, 1 and 2.
1031
1032 2005-11-17  Hans-Peter Nilsson  <hp@axis.com>
1033
1034         * cris/sim-main.h (struct _sim_cpu): New members last_syscall,
1035         last_open_fd, last_open_flags.
1036         * cris/traps.c: Don't include targ-vals.h.
1037         (TARGET_O_ACCMODE): Define.
1038         (cris_break_13_handler): Set new _sim_cpu members.
1039         <case TARGET_SYS_fcntl>: Support special case of F_GETFL.
1040         Rearrange code as switch.  Emit "unimplemented" abort for
1041         unimplemented fcntl calls.
1042
1043         * cris/traps.c (TARGET_SYS_stat): Define.
1044         (syscall_stat32_map): Add entry for TARGET_SYS_stat.
1045         (cris_break_13_handler) <case TARGET_SYS_stat>: New case.
1046
1047 2005-11-16  Hans-Peter Nilsson  <hp@axis.com>
1048
1049         * cris/cris-tmpl.c (MY (f_model_insn_before)): Make sure only the
1050         low 32 bits are used after an unsigned long cast.
1051
1052 2005-05-28  Hans-Peter Nilsson  <hp@axis.com>
1053
1054         * cris/Makefile.in (stamp-v32fmloop): Depend on stamp-v10fmloop.
1055
1056 2005-05-26  Chris Demetriou  <cgd@netbsd.org>
1057
1058         * MAINTAINERS: Update my mail address, move myself to the
1059         "Past maintainers" section.
1060
1061 2005-05-17  Corinna Vinschen  <vinschen@redhat.com>
1062
1063         * configure.ac: Add igen to v850 build.
1064         * configure: Regenerate.
1065
1066 2005-04-29  Paul Brook  <paul@codesourcery.com>
1067
1068         * common/callback.c (PIPE_BUF): Provide default definition.
1069         (os_lstat): Use stat if lstat is not available on the host.
1070         (os_ftruncate): Return EINVAL if not available on the host.
1071         (os_truncate): Ditto.
1072         * common/configure.ac: Check for lstat, truncate and ftruncate.
1073         * common/configure: Regenerate.
1074         * common/config.in: Regenerate.
1075
1076 2005-04-27  Paul Brook  <paul@codesourcery.com>
1077
1078         * common/Make-common.in: Add $(EXEEXT) to "run".
1079
1080 2005-04-18  Hans-Peter Nilsson  <hp@axis.com>
1081
1082         * cris/traps.c (cris_break_13_handler) <case TARGET_SYS_mmap2>:
1083         For ((len & 8191) != 0 && fd == (USI) -1), don't say this isn't
1084         implemented.  In call to create_map, pad length argument to 8k.
1085
1086 2005-04-15  Corinna Vinschen  <vinschen@redhat.com>
1087
1088         * configure.ac: Add explicit sh64 case.
1089         * configure: Regenerate.
1090
1091 2005-03-30  Paul Brook  <paul@codesourcery.com>
1092
1093         * arm/wrapper.c: Provide SIGTRAP and SIGBUS.
1094
1095 2005-03-24  Hans-Peter Nilsson  <hp@axis.com>
1096
1097         * cris/Makefile.in (stamp-v10fcpu, stamp-v32fcpu): Add kludge to
1098         include cgen-ops.h in decodev10.c and decodev32.c.
1099         * cris/sim-main.h: Don't include cgen-ops.h here.
1100         * cris/arch.c, cris/arch.h, cris/cpuall.h, cris/cpuv10.c,
1101         cris/cpuv10.h, cris/cpuv32.c, cris/cpuv32.h, cris/cris-desc.c,
1102         cris/cris-desc.h, cris/cris-opc.h, cris/decodev10.c,
1103         cris/decodev10.h, cris/decodev32.c, cris/decodev32.h,
1104         cris/modelv10.c, cris/modelv32.c, cris/semcrisv10f-switch.c,
1105         cris/semcrisv32f-switch.c: Regenerate.
1106
1107         * cris/traps.c (cris_break_13_handler) <case
1108         TARGET_SYS_rt_sigaction>: Rename sa_handler, sa_flags,
1109         sa_restorer, sa_mask_low, sa_mask_high to target_sa_handler etc.
1110
1111 2005-03-23  Mark Kettenis  <kettenis@gnu.org>
1112
1113         * cris/configure: Regenerate.
1114
1115 2005-02-28  Jim Blandy  <jimb@redhat.com>
1116
1117         * d10v/configure.ac, igen/configure.ac, m68hc11/configure.ac,
1118         mips/configure.ac, mn10300/configure.ac, v850/configure.ac:
1119         Regenerated, after change to common/aclocal.m4.
1120
1121 2005-02-18  Corinna Vinschen  <vinschen@redhat.com>
1122
1123         * iq2000: New target subdirectory.
1124         * configure.ac: Add iq2000 target.
1125         * configure: Regenerate.
1126
1127 2005-01-29  Hans-Peter Nilsson  <hp@axis.com>
1128
1129         * Makefile.in (all, clean mostlyclean, distclean maintainer-clean)
1130         (realclean, install): Fail if subdir make failed.
1131
1132 2005-01-28  Hans-Peter Nilsson  <hp@axis.com>
1133
1134         * cris: New directory, simulator for Axis Communications CRIS
1135         including CRIS v32, CGEN-based.
1136         * configure.ac: Add corresponding configury.
1137         * configure: Regenerate.
1138
1139 2005-01-17  Andrew Cagney  <cagney@gnu.org>
1140
1141         * configure.ac: For mips*-*-* and mn10300*-*-* configure the
1142         common directory.  Remove sparc*-*-* from list.
1143
1144 2005-01-11  Andrew Cagney  <cagney@gnu.org>
1145
1146         * Makefile.in (autoconf-common autoheader-common): Add --force to
1147         autoconf and autoheader.
1148         (autoconf-common autoheader-common)
1149         (autoconf-install autoheader-install): Check for configure.ac, not
1150         configure.in.
1151         * configure.ac: Delete AC_CONFIG_AUX_DIR.
1152         * configure: Re-generate.
1153
1154 2005-01-07  Andrew Cagney  <cagney@gnu.org>
1155
1156         * configure.ac: Replace configure.in.  Requires autoconf 2.59 and
1157         correctly calls AC_CONFIG_SUBDIRS.
1158         * configure: Re-generate.
1159
1160 2004-12-01  Andrew Cagney  <cagney@gnu.org>
1161
1162         * i960, h8500: Delete directory.
1163
1164 2004-11-12  Andrew Cagney  <cagney@gnu.org>
1165
1166         * d30v, fr30, mn10200, z8k: Delete directory.
1167
1168 2004-03-10  Ben Elliston  <bje@gnu.org>
1169
1170         * MAINTAINERS: Update my mail address.
1171
1172 2004-01-26  Chris Demetriou  <cgd@broadcom.com>
1173
1174         * configure.in (mips*-*-*): Configure in testsuite.
1175         * configure: Regenerate.
1176
1177 2003-10-08  Dave Brolley  <brolley@redhat.com>
1178
1179         * configure.in: Move frv handling to alphabetically correct placement.
1180
1181 2003-09-03  Andreas Schwab  <schwab@suse.de>
1182
1183         * Makefile.in (FLAGS_TO_PASS): Pass down $(bindir) and $(mandir).
1184
1185 2003-08-29  Dave Brolley  <brolley@redhat.com>
1186
1187         * MAINTAINERS: Add myself as maintainer of the FRV port.
1188
1189 2003-08-20  Michael Snyder  <msnyder@redhat.com>
1190             Dave Brolley  <brolley@redhat.com>
1191
1192         * frv/: New directory, simulator for the Fujitsu FRV.
1193         * configure.in: Add frv configury.
1194         * configure: Regenerate.
1195
1196 2003-08-10  Ben Elliston  <bje@wasabisystems.com>
1197
1198         * MAINTAINERS: Update my mail address.
1199
1200 2003-08-09  Andrew Cagney  <cagney@redhat.com>
1201
1202         * MAINTAINERS: Andrew Cagney (mips) and Geoff Keating (ppc) drop
1203         maintenance.  List igen and sh maintainers.  Mention that target
1204         and global maintainers pick up the slack.
1205
1206 2003-07-09  Michael Snyder  <msnyder@redhat.com>
1207
1208         * configure.in: Add testsuite to extra_subdirs for sh.
1209         * configure: Regenerate.
1210
1211 2003-01-23  Nick Clifton  <nickc@redhat.com>
1212
1213         * Add sh2e support:
1214
1215 2002-04-02  Alexandre Oliva  <aoliva@redhat.com>
1216
1217         * sh/gencode.c: Replace sh3e with sh2e except in fsqrt.
1218
1219 2002-08-24  Geoffrey Keating  <geoffk@redhat.com>
1220
1221         * MAINTAINERS: Update my email address.
1222
1223 2002-07-17  Andrew Cagney  <ac131313@redhat.com>
1224
1225         * w65/: Delete directory.
1226
1227 2002-07-16  Andrew Cagney  <ac131313@redhat.com>
1228
1229         * configure.in (extra_subdirs): Mark fr30-*-* as obsolete.
1230         * configure: Re-generate.
1231
1232 2002-07-13  Andrew Cagney  <ac131313@redhat.com>
1233
1234         * configure.in (extra_subdirs): Mark d30v-*-* as obsolete.
1235         * configure: Re-generate.
1236
1237 2002-06-16  Andrew Cagney  <ac131313@redhat.com>
1238
1239         * Makefile.in (autoconf-changelog autoheader-changelog): Let name,
1240         id, date and host to be overriden by NAME, ID, DATE and HOST
1241         respectfully.  Use ISO dates.
1242
1243 Thu Jun  6 12:34:13 2002  Andrew Cagney  <cagney@redhat.com>
1244
1245         * Makefile.in (ChangeLog): New makefile variable.
1246         * README-HACKING: Mention the ChangeLog makefile variable.
1247
1248 2002-06-01  Andrew Cagney  <ac131313@redhat.com>
1249
1250         * tic80/: Delete directory.
1251
1252 2002-05-16  Stephane Carrez  <stcarrez@nerim.fr>
1253
1254         * MAINTAINERS: Update my email address.
1255
1256 2002-03-06  Stephane Carrez  <Stephane.Carrez@worldnet.fr>
1257
1258         * MAINTAINERS: Record self as maintainer of m68hc11 simulator.
1259
1260 2002-03-01  Frank Ch. Eigler  <fche@redhat.com>
1261
1262         * MAINTAINERS: Record self as a co-maintainer of just common/.
1263
1264 2002-02-07  Nick Clifton  <nickc@cambridge.redhat.com>
1265
1266         * MAINTAINERS: Point to GDB files describing overall maintaince
1267         and check-in procedures.
1268
1269 2002-01-10  Nick Clifton  <nickc@cambridge.redhat.com>
1270
1271         * MAINTAINERS: Add myself for ARM portions.
1272
1273 2001-10-19  Andrew Cagney  <ac131313@redhat.com>
1274
1275         * configure.in: When Linux or NetBSD, enable PowerPC simulator.
1276         * configure: Re-generate.
1277
1278 2001-02-16  Ben Elliston  <bje@redhat.com>
1279
1280         * MAINTAINERS: Add myself for common portions.
1281
1282 2001-01-15  Chris Demetriou  <cgd@broadcom.com>
1283
1284         * MAINTAINERS: Added self and Andrew for the mips sim.
1285
1286 2000-10-25  Geoff Keating  <geoffk@cygnus.com>
1287
1288         * MAINTAINERS: Added self and Andrew for the ppc sim.
1289
1290 Thu Jul 27 21:26:26 2000  Andrew Cagney  <cagney@b1.cygnus.com>
1291
1292         From Stephane Carrez <Stephane.Carrez@worldnet.fr>:
1293         * m68hc11: New directory.
1294         * configure.in: Add.
1295         * configure: Regenerate.
1296
1297 Tue Jul  4 13:43:54 2000  Andrew Cagney  <cagney@b1.cygnus.com>
1298
1299         * tic80: New directory.
1300         * configure.in: Add configury.
1301         * configure: Regenerate.
1302
1303 2000-04-20  Nick Clifton  <nickc@cygnus.com>
1304
1305         * configure.in (extra_subdirs): Add testsuite to strongarm
1306         directories.
1307         * configure: Regenerate.
1308
1309 Sat Mar  4 16:48:54 2000  Andrew Cagney  <cagney@b1.cygnus.com>
1310
1311         * MAINTAINERS: New file.  Blank.
1312
1313 1999-11-18  Ben Elliston  <bje@cygnus.com>
1314
1315         * configure.in: Require autoconf 2.13 and remove obsolete
1316         invocation of AC_C_CROSS.
1317         * configure: Regenerate.
1318
1319 1999-09-29  Doug Evans  <devans@casey.cygnus.com>
1320
1321         * configure.in: Configure the testsuite directory for thumb.
1322         * configure: Regenerate.
1323
1324 1999-07-16  Ben Elliston  <bje@cygnus.com>
1325
1326         * configure.in: Configure the testsuite directory for arm.
1327         * configure: Regenerate.
1328
1329 1999-04-08  Nick Clifton  <nickc@cygnus.com>
1330
1331         * configure.in: Add support for MCore target.
1332         * configure: Regenerate.
1333
1334 1999-03-14  Stan Shebs  <shebs@andros.cygnus.com>
1335
1336         * Makefile.in (FLAGS_TO_PASS, TARGET_FLAGS_TO_PASS): Remove
1337         RUNTEST instead of commenting out, fixes portability problem.
1338
1339 1999-02-08  Nick Clifton  <nickc@cygnus.com>
1340
1341         * configure.in: Add support for StrongARM target.
1342         * configure: Regenerate.
1343
1344 1999-01-04  Jason Molenda  (jsm@bugshack.cygnus.com)
1345
1346         * configure.in: Require autoconf 2.12.1 or higher.
1347
1348 1998-12-08  James E Wilson  <wilson@wilson-pc.cygnus.com>
1349
1350         * configure.in (i960-*-*): Add.
1351         * configure: Rebuild.
1352
1353 Wed Nov  4 19:11:43 1998  Dave Brolley  <brolley@cygnus.com>
1354
1355         * configure.in: Added case for fr30-*-*.
1356         * configure: Regenerated.
1357
1358 Fri Sep 25 10:12:19 1998  Christopher Faylor <cgf@cygnus.com>
1359
1360         * ppc/Makefile.in: Add EXEEXT to installed powerpc-eabi-run program
1361         to allow successful operation on Windows.
1362
1363 Thu May 28 14:59:46 1998 Jillian Ye <jillian@cygnus.com>
1364
1365         * Makefile.in: Take RUNTEST out of FLAGS_TO_PASS so that make
1366         check can be invoked recursively.
1367
1368 Wed Apr 29 12:38:53 1998  Mark Alexander  <marka@cygnus.com>
1369
1370         * configure.in: Build simulator on sparclite and sparc86x targets.
1371         * configure: Regenerate.
1372
1373 Sun Apr 26 15:21:01 1998  Tom Tromey  <tromey@cygnus.com>
1374
1375         * Makefile.in (autoconf-common autoheader-common): Don't pass -l
1376         to autoconf and autoheader.
1377
1378 Fri Apr 24 11:14:13 1998  Tom Tromey  <tromey@cygnus.com>
1379
1380         * Makefile.in (autoconf-common autoheader-common): Pass `-l
1381         ../common' to autoconf and autoheader.  Unconditionally run
1382         autoconf in every subdir.
1383         (autoconf-changelog autoheader-changelog): Unconditionally run
1384         commands in every subdir.
1385         (autoconf-install autoheader-install): Likewise.
1386
1387 Tue Mar 24 17:12:43 1998  Stu Grossman  <grossman@bhuna.cygnus.co.uk>
1388
1389         * Makefile.in:  Get SHELL from configure.
1390         * (FLAGS_TO_PASS):  Pass down SHELL.
1391         * configure:  Regenerate with autoconf 2.12.1 to fix shell issues for
1392         NT native builds.
1393
1394 Tue Mar 24 11::18:00 1998  Joyce Janczyn  <janczyn@cygnus.com>
1395
1396         * configure.in (extra_subdirs): Enable igen for mn10300.
1397         * configure: Re-generate.
1398
1399 Tue Dec  2 10:10:42 1997  Nick Clifton  <nickc@cygnus.com>
1400
1401         * configure.in (extra_subdirs): Add support for thumb target.
1402
1403         * configure (extra_subdirs): Add support for thumb target.
1404
1405 Wed Oct  8 12:38:48 1997  Andrew Cagney  <cagney@b1.cygnus.com>
1406
1407         * configure.in (extra_subdirs): Add IGEN directory when MIPS
1408         target.
1409         * configure: Regenerate.
1410
1411 Fri Sep 12 13:10:31 1997  Andrew Cagney  <cagney@b1.cygnus.com>
1412
1413         * configure.in (extra_subdirs): v850ea needs igen.
1414         * configure: Re-generate.
1415
1416 Mon Sep  1 16:48:23 1997  Andrew Cagney  <cagney@b1.cygnus.com>
1417
1418         * configure.in (testdir): When a testsuite directory, add that to
1419         the list of confdirs.
1420
1421 Tue Aug 19 11:17:46 1997  Andrew Cagney  <cagney@b1.cygnus.com>
1422
1423         * configure.in (extra_subdirs): Enable igen ready for V850.
1424
1425 Tue Aug 26 15:14:48 1997  Andrew Cagney  <cagney@b1.cygnus.com>
1426
1427         * configure.in (w65-*-*, only_if_enabled): Set.
1428         * configure: Re-generate.
1429
1430 Mon Aug 25 16:26:53 1997  Andrew Cagney  <cagney@b1.cygnus.com>
1431
1432         * configure.in (sparc*-*-*, only_if_enabled): Set
1433         only_if_enabled=yes.  Check only_if_enabled before enabling a
1434         simulator.
1435         * configure: Regenerate.
1436
1437 Mon Aug 18 10:56:59 1997  Nick Clifton  <nickc@cygnus.com>
1438
1439         * configure.in (extra_subdirs): Add v850e target.
1440
1441 Mon Aug 18 10:56:59 1997  Nick Clifton  <nickc@cygnus.com>
1442
1443         * configure.in (extra_subdirs): Add v850ea target.
1444
1445 Fri Jul 25 11:40:47 1997  Doug Evans  <dje@canuck.cygnus.com>
1446
1447         * configure.in (sparc*-*-*): Don't build erc32.
1448         * configure: Regenerate.
1449
1450 Thu Apr 24 00:47:20 1997  Doug Evans  <dje@canuck.cygnus.com>
1451
1452         * configure.in (m32r-*-*): New target.
1453         * configure: Regenerate.
1454
1455         * Makefile.in (autoconf-common, autoconf-changelog): Change $* to $@.
1456
1457 Mon Apr 21 22:57:55 1997  Andrew Cagney  <cagney@b1.cygnus.com>
1458
1459         * Makefile.in (.NOEXPORT, MAKEOVERRIDES): Moved to end, BSD make
1460         thought that .NOEXPORT was the default target.
1461
1462 Fri Apr 11 17:18:07 1997  Ian Lance Taylor  <ian@cygnus.com>
1463
1464         * Makefile.in (clean mostlyclean): Restore targets accidentally
1465         deleted in earlier change.
1466
1467 Thu Apr  3 12:20:32 1997  Andrew Cagney  <cagney@kremvax.cygnus.com>
1468
1469         * Makefile.in (autoheader-common, autoheader-changelog,
1470         autoheader-install): Perform autoheader in addition to autoconf.
1471
1472 Wed Apr  2 15:09:05 1997  Doug Evans  <dje@canuck.cygnus.com>
1473
1474         * Makefile.in (autoconf-install): New target.
1475         (autoconf-changelog): Try different way to obtain user name.
1476
1477 Wed Apr  2 14:25:52 1997  Andrew Cagney  <cagney@kremvax.cygnus.com>
1478
1479         * Makefile.in (autoconf-changelog): New target, update
1480         ChangeLog for all subdirectories - normally used after
1481         autoconf-common target.
1482
1483 Wed Mar 19 14:26:21 1997  Andrew Cagney  <cagney@kremvax.cygnus.com>
1484
1485         * configure.in (extra_subdirs): Include testsuite for d30v.
1486         * configure: Regenerate.
1487
1488         * Makefile.in (RUNTEST, RUNTESTFLAGS): Borrow test rules from
1489         ../gdb/Makefile.in
1490         (check): New rules - drive the testsuite.
1491
1492 Mon Mar  3 13:01:00 1997  Jeffrey A Law  (law@cygnus.com)
1493
1494         * configure.in: Add mn10200 configure lines accidentally
1495         removed.
1496         * configure: Regenerated.
1497
1498 Wed Feb 19 10:34:20 1997  Andrew Cagney  <cagney@critters.cygnus.com>
1499
1500         * configure.in (extra_subdirs): Generalize common sub directory
1501         into a list.
1502         (extra_subdirs): For d30v add igen to the list to be built.
1503
1504 Sun Feb 16 16:37:47 1997  Andrew Cagney  <cagney@critters.cygnus.com>
1505
1506         * configure.in (d30v): New target.
1507         * configure: Regenerated.
1508
1509 Wed Feb 19 23:17:13 1997  Jeffrey A Law  (law@cygnus.com)
1510
1511         * configure.in: Don't require GCC to build the mn10200
1512         simulator anymore.
1513         * configure: Rebuilt.
1514
1515 Wed Feb  5 13:28:13 1997  Doug Evans  <dje@canuck.cygnus.com>
1516
1517         * configure.in: Don't configure any subdirs if no simulator
1518         is being built.  Don't use erc32 for sparc64.
1519         * configure: Regenerated.
1520
1521 Tue Feb  4 13:19:39 1997  Doug Evans  <dje@canuck.cygnus.com>
1522
1523         * Makefile.in (autoconf-common): New target.
1524         * configure.in: Do configure common.
1525         * configure: Regenerated.
1526
1527 Thu Jan 23 13:59:52 1997  Stu Grossman  (grossman@critters.cygnus.com)
1528
1529         * configure configure.in:  Don't configure common anymore.  Files
1530         from common are now built in the individual simualtor directories.
1531         This fixes problems with the WinGDB build procedure.
1532
1533 Mon Jan 13 13:16:42 1997  Jeffrey A Law  (law@cygnus.com)
1534
1535         * configure: Enable the mn10200 simulator.
1536
1537 Wed Nov 20 01:00:36 1996  Doug Evans  <dje@canuck.cygnus.com>
1538
1539         * configure.in (configdirs): Add common.
1540         * configure: Regenerated.
1541
1542 Fri Nov  1 08:03:30 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
1543
1544         * configure.in (powerpc*-*-linux*): Treat like the other powerpc
1545         system V based targets.
1546         * configure: Regenerate.
1547
1548 Thu Oct 17 12:50:08 1996  Doug Evans  <dje@canuck.cygnus.com>
1549
1550         * configure.in (--enable-sim-powerpc): Delete.
1551         (--enable-sim): Add.
1552         * configure: Regenerated.
1553
1554 Fri Oct 11 21:13:43 1996  Jeffrey A Law  (law@cygnus.com)
1555
1556         * configure.in: Only build the V850 simulator if
1557         we are using gcc.
1558         * configure: Rebuild.
1559
1560 Sun Sep  8 17:22:50 1996  Ian Lance Taylor  <ian@cygnus.com>
1561
1562         * configure.in: Do build erc32 for DOS and Windows hosts.
1563         * configure: Rebuild.
1564
1565 Wed Sep  4 18:11:27 1996  Stu Grossman  (grossman@critters.cygnus.com)
1566
1567         * Makefile.in erc32/Makefile.in:  Don't set srcroot.  This should
1568         be inherited from the parent.  Remove INSTALL_XFORM and
1569         INSTALL_XFORM1.  Make INSTALL be set from configure.
1570
1571 Wed Sep  4 15:49:16 1996  Ian Lance Taylor  <ian@cygnus.com>
1572
1573         * configure.in: Only build the MIPS simulator if we are using
1574         gcc.
1575         * configure: Rebuild.
1576
1577 Wed Aug 28 19:05:23 1996  Jeffrey A Law  (law@cygnus.com)
1578
1579         * configure.in (v850-*-*): Added V850 simulator.
1580
1581 Thu Aug  1 17:08:41 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
1582
1583         * configure.in (d10v-*-*): Added D10V simulator.
1584
1585 Wed Jun 26 12:33:57 1996  Jason Molenda  (crash@godzilla.cygnus.co.jp)
1586
1587         * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir,
1588         INSTALL_PROGRAM, INSTALL_DATA): Use autoconf-set values.
1589         (docdir): Removed.
1590         * configure.in (AC_PREREQ): autoconf 2.5 or higher.
1591         (AC_PROG_INSTALL): Added.
1592         * configure: Rebuilt.
1593
1594 Mon Jun 24 14:18:26 1996  Ian Lance Taylor  <ian@cygnus.com>
1595
1596         * configure.in: Only configure erc32 if using gcc.
1597         * configure: Rebuild.
1598
1599 Tue Jun  4 09:24:21 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
1600
1601         * configure.in (sim_target): Build PowerPC simulator for powerpc
1602         System V.4, Solaris, and Elf targets.
1603         * configure: Regenerate with autoconf 2.10.
1604
1605 Wed May 22 12:10:49 1996  Rob Savoye  <rob@chinadoll>
1606
1607         * configure.in: Only built erc32 simulator on Unix hosts as it
1608         uses pseudo ttys.
1609         * configure: Regenerated with autoconf 2.8.
1610
1611 Sun May 19 20:20:40 1996  Rob Savoye  <rob@chinadoll.cygnus.com>
1612
1613         * erc32: Sparc simulator from the ESA.
1614
1615 Sun Apr  7 21:00:09 1996  Fred Fish  <fnf@cygnus.com>
1616
1617         From: Miles Bader  <miles@gnu.ai.mit.edu>
1618         * configure.in: Use AC_CHECK_TOOL to find AR & RANLIB.
1619         * configure: Regenerate using autoconf.
1620
1621 Thu Feb 22 11:31:50 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
1622
1623         * Makefile.in (install): Fix typo.
1624
1625 Wed Feb 21 11:59:57 1996  Ian Lance Taylor  <ian@cygnus.com>
1626
1627         * configure: Regenerate with autoconf 2.7.
1628
1629         * Makefile.in (all): Simplify.
1630         (clean, mostlyclean): SUBDIRS may contain whitespace; fix the loop
1631         as in the all target.
1632         (distclean, maintainer-clean, realclean): Likewise.
1633         (install): Likewise.
1634
1635 Thu Feb 15 18:37:00 1996  Fred Fish  <fnf@cygnus.com>
1636
1637         * Makefile.in (all): Remove extra '\' char from shell script.
1638
1639 Wed Feb 14 16:43:59 1996  Mike Meissner  <meissner@tiktok.cygnus.com>
1640
1641         * Makefile.in (all): Avoid a for loop with zero elements, even if
1642         the loop will not be executed because of an if statement.
1643
1644 Wed Jan 31 21:48:34 1996  Fred Fish  <fnf@cygnus.com>
1645
1646         * Makefile.in (install): Add missing semicolon in "fi \".
1647
1648 Thu Nov  9 16:10:56 1995  Michael Meissner  <meissner@tiktok.cygnus.com>
1649
1650         * Makefile.in (AR, CC, CFLAGS, CC_FOR_BUILD, RANLIB): Pick up
1651         defaults from configure.
1652
1653         * configure.in: Pick up AR, CC, CFLAGS, CC_FOR_BUILD, RANLIB using
1654         configure defaults.
1655         (powerpc*-*-eabi*): Build simulator for all powerpc eabi targets
1656         if either --enable-sim-powerpc is used, or the host compiler is
1657         GCC.
1658
1659 Wed Nov  8 15:46:49 1995  James G. Smith  <jsmith@pasanda.cygnus.co.uk>
1660
1661         * configure.in (mips*-*-*): Added "mips" simulator target.
1662         * configure: Re-generated.
1663
1664 Tue Oct 10 11:08:20 1995  Fred Fish  <fnf@cygnus.com>
1665
1666         * Makefile.in (BISON): Remove macro.
1667         (FLAGS_TO_PASS): Remove BISON.
1668
1669 Sun Oct  8 04:26:27 1995  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
1670
1671         * configure.in:  Explicitly `exit 0' for broken shells.
1672         * configure:  Rebuilt.
1673
1674 Fri Oct  6 12:03:27 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
1675
1676         * common/run.c (main): Initialize the callbacks.
1677
1678 Wed Sep 20 13:34:50 1995  Ian Lance Taylor  <ian@cygnus.com>
1679
1680         * Makefile.in (maintainer-clean): New synonym for realclean.
1681
1682 Fri Aug 25 11:53:43 1995  Michael Meissner  <meissner@tiktok.cygnus.com>
1683
1684         * configure.in (powerpc*-*-eabisim*): Only build the simulator if
1685         the target is powerpc*-*-eabisim*, since it requires GCC to build.
1686
1687 Mon Aug 21 17:53:48 1995  Michael Meissner  <meissner@tiktok.cygnus.com>
1688
1689         * configure.in (powerpc{,le}-*-*): Add psim from Andrew Cagney
1690         <cagney@highland.com.au>.
1691         * configure: Regnerate from configure.in.
1692
1693 Thu Aug  3 10:45:37 1995  Fred Fish  <fnf@cygnus.com>
1694
1695         * Update all FSF addresses except those in COPYING* files.
1696
1697 Thu Jul 20 15:17:29 1995  Fred Fish  <fnf@cygnus.com>
1698
1699         * Makefile.in (CC_FOR_BUILD):  Define default and arrange to pass
1700         submakes either default or passed in value.
1701
1702 Wed Jul  5 14:32:54 1995  J.T. Conklin  <jtc@rtl.cygnus.com>
1703
1704         * Makefile.in (all, clean, distclean, mostlyclean, realclean,
1705           install): Changed targets so that they descend all
1706           subdirectories in $(SUBDIRS).
1707           (*-all, *-clean, *-install): Removed targets.
1708
1709         * configure.in: Don't bother with target makefile fragments, they
1710           are no longer needed.
1711         * configure: regenerated.
1712
1713         * Makefile.in, configure.in: converted to autoconf.
1714         * configure: New file, generated with autconf 2.4.
1715
1716 Wed May 24 14:48:46 1995  Steve Chamberlain  <sac@slash.cygnus.com>
1717
1718         * Makefile.in: Support ARM.
1719         * configure.in: Ditto.
1720
1721 Sun Jan 15 16:53:47 1995  Steve Chamberlain  <sac@splat>
1722
1723         * Makefile.in: Support W65.
1724         * configure.in: Ditto.
1725
1726 Sun Mar 13 09:27:50 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
1727
1728         * Makefile.in: Add TAGS target.
1729
1730 Mon Sep 13 12:47:15 1993  K. Richard Pixley  (rich@sendai.cygnus.com)
1731
1732         * Makefile.in (all-z8k, install-z8k, clean-z8k, all-h8300,
1733           install-h8300, clean-h8300, all-h8500, install-h8500,
1734           clean-h8500, all-sh, install-sh, clean-sh): do not echo
1735           recursion lines.
1736
1737 Wed Jun 30 14:12:05 1993  david d `zoo' zuhn  (zoo at poseidon.cygnus.com)
1738
1739         * Makefile.in: remove endian.h trace from h8500
1740
1741 Sun Jun 13 13:08:58 1993  Jim Kingdon  (kingdon@cygnus.com)
1742
1743         * Makefile.in: Add distclean, realclean, and mostlyclean targets.
1744
1745 Fri May 21 11:21:16 1993  david d `zoo' zuhn  (zoo at cirdan.cygnus.com)
1746
1747         * Makefile.in: make all of the all-* target (except all-nothing)
1748         depend on endian.h, so that if we're not building a simulator, we
1749         don't built endian
1750
1751 Fri May 21 10:55:06 1993  Ian Lance Taylor  (ian@cygnus.com)
1752
1753         * Makefile.in (check, installcheck): Added dummy targets.
1754
1755 Mon May  3 21:39:43 1993  Fred Fish  (fnf@cygnus.com)
1756
1757         * Makefile.in (endian): Find endian.c in $(srcdir), and also
1758         explicitly make it, since some makes apparently don't work with
1759         VPATH and .c to executable rules (SunOS make for example).
1760
1761 Mon May  3 08:29:01 1993  Steve Chamberlain  (sac@thepub.cygnus.com)
1762
1763         * Makefile.in (endian): Add explicit rule for broken makes.
1764
1765 Mon Mar 15 15:47:53 1993  Ian Lance Taylor  (ian@cygnus.com)
1766
1767         * Makefile.in (info, install-info): New targets.
1768         (DO_INSTALL): Renamed from INSTALL, which is overridden by the top
1769         level Makefile.
1770
1771 Wed Feb 10 20:12:27 1993  K. Richard Pixley  (rich@ok.cygnus.com)
1772
1773         * Makefile.in (endian.h): build endian.h via a temporary file so
1774           that we don't leave an incomplete file lying around on
1775           interrupted builds.
1776           (clean): remove endian, e.h, and endian.h.
1777
1778 Mon Feb  8 11:46:06 1993  Steve Chamberlain  (sac@thepub.cygnus.com)
1779
1780         * Makefile.in, configure.in: if target isn't supported, build a
1781         harmless makefile.
1782
1783