1 2012-11-05 Stephane Carrez <Stephane.Carrez@gmail.com>
3 * MAINTAINERS: Update my email address.
5 2012-09-24 Steve Ellcey <sellcey@mips.com>
7 * mips/basic.exp: Add mips*-mti-elf* target.
8 * configure.ac: Add mips*-mti-elf* target.
9 * configure: Regenerate.
11 2012-06-15 Joel Brobecker <brobecker@adacore.com>
13 * configure: Regenerate.
15 2012-06-06 Michael Eager <eager@eagercon.com>
17 * microblaze/interp.c (config.h): Add #include.
19 2011-11-29 Joel Brobecker <brobecker@adacore.com>
21 * MAINTAINERS (Global Maintainers): New section. Add Mike
24 2011-11-28 DJ Delorie <dj@redhat.com>
26 * configure.tgt: Add rl78 support.
27 * configure: Regenerate.
28 * rl78: New directory.
29 * MAINTAINERS: Add myself as RL78 maintainer.
31 2011-07-08 Hans-Peter Nilsson <hp@axis.com>
33 * MAINTAINERS: Remove Thiemo Seufer.
35 2011-06-04 Mike Frysinger <vapier@gentoo.org>
37 * configure.tgt (bfin-*-*): Add sim_testsuite=yes.
38 * configure: Regenerate.
40 2011-05-04 Joseph Myers <joseph@codesourcery.com>
42 * configure.tgt (thumb*-*-* | strongarm*-*-* | xscale-*-*): Don't
44 * configure: Regenerate.
46 2011-03-05 Mike Frysinger <vapier@gentoo.org>
48 * MAINTAINERS: Add bfin entry.
49 * configure.tgt (bfin-*-*): Handle bfin targets.
50 * configure: Regenerate.
52 2011-01-05 Mike Frysinger <vapier@gentoo.org>
54 * .gitignore: Add /*/hw-config.h.
56 2010-12-23 Mike Frysinger <vapier@gentoo.org>
58 * .gitignore: New file.
60 2010-07-28 DJ Delorie <dj@redhat.com>
62 * MAINTAINERS: Add self as RX maintainer. Sort list.
64 2010-06-08 Nick Clifton <nickc@redhat.com>
66 * reg.c (set_oszc): Use unsigned int for the mask.
67 (set_szc, set_osz, set_sz): Likewise.
69 2010-04-26 Mike Frysinger <vapier@gentoo.org>
71 * configure.ac: Target logic moved out to and included from ...
72 * configure.tgt: ... this new file.
73 * configure: Regenerated.
75 2010-04-12 Mike Frysinger <vapier@gentoo.org>
77 * README-HACKING: Add more sections.
79 2010-02-11 Doug Evans <dje@sebabeach.org>
81 * cris/cpuv10.h, * cris/cpuv32.h, * cris/cris-desc.c,
82 * cris/cris-desc.h, * cris/decodev10.c, * cris/decodev32.c,
83 * cris/modelv10.c, * cris/modelv32.c, * cris/semcrisv10f-switch.c,
84 * cris/semcrisv32f-switch.c: Regenerate.
86 2010-01-09 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
88 * avr/configure: Regenerate.
89 * cris/configure: Regenerate.
90 * microblaze/configure: Regenerate.
92 2010-01-02 Doug Evans <dje@sebabeach.org>
94 * cris/arch.c, * cris/arch.h, * cris/cpuall.h, * cris/cpuv10.c,
95 * cris/cpuv10.h, * cris/cpuv32.c, * cris/cpuv32.h, * cris/cris-desc.c,
96 * cris/cris-desc.h, * cris/cris-opc.h, * cris/decodev10.c,
97 * cris/decodev10.h, * cris/decodev32.c, * cris/decodev32.h,
98 * cris/modelv10.c, * cris/modelv32.c, * cris/semcrisv10f-switch.c,
99 * cris/semcrisv32f-switch.c: Regenerate, update copyright year.
101 2010-01-01 Doug Evans <dje@sebabeach.org>
103 * cris/mloop.in: Fix copyright year update snafu.
105 2009-11-24 Joel Brobecker <brobecker@adacore.com>
107 * common/aclocal.m4: Add include of ../../config/zlib.m4.
108 * common/common.m4: Use AM_ZLIB to check for zlib support.
109 * ppc/configure.ac: Likewise.
110 * arm/configure, avr/configure, common/configure, cr16/configure,
111 cris/configure, d10v/configure, erc32/configure, frv/configure,
112 h8300/configure, iq2000/configure, lm32/configure, m32c/configure,
113 m32r/configure, m68hc11/configure, mcore/configure,
114 microblaze/configure, mips/configure, mn10300/configure,
115 moxie/configure, ppc/configure, sh/configure, sh64/configure,
116 v850/configure: Regenerate.
118 2009-11-24 DJ Delorie <dj@redhat.com>
121 * configure.ac: Add entry for Renesas RX.
122 * configure: Regenerate.
124 2009-11-22 Doug Evans <dje@sebabeach.org>
126 * cris/cpuall.h: Regenerate.
127 * cris/cpuv10.h: Regenerate.
128 * cris/cpuv32.h: Regenerate.
129 * cris/decodev10.c: Regenerate.
130 * cris/decodev10.h: Regenerate.
131 * cris/decodev32.c: Regenerate.
132 * cris/decodev32.h: Regenerate.
134 2009-11-12 Tristan Gingold <gingold@adacore.com>
136 * avr/interp.c (sim_write): Allow byte access.
139 2009-11-12 Tristan Gingold <gingold@adacore.com>
141 * avr/interp.c (sim_load): Clear memory before loading.
143 2009-11-09 Tristan Gingold <gingold@adacore.com>
145 * avr/interp.c (sim_resume): Fix typo for OP_ret.
147 2009-10-23 Doug Evans <dje@sebabeach.org>
149 * cris/arch.c: Regenerate.
150 * cris/arch.h: Regenerate.
151 * cris/cpuall.h: Regenerate.
152 * cris/cpuv10.c: Regenerate.
153 * cris/cpuv10.h: Regenerate.
154 * cris/cpuv32.c: Regenerate.
155 * cris/cpuv32.h: Regenerate.
156 * cris/cris-desc.c: Regenerate.
157 * cris/cris-desc.h: Regenerate.
158 * cris/cris-opc.h: Regenerate.
159 * cris/decodev10.c: Regenerate.
160 * cris/decodev10.h: Regenerate.
161 * cris/decodev32.c: Regenerate.
162 * cris/decodev32.h: Regenerate.
163 * cris/modelv10.c: Regenerate.
164 * cris/modelv32.c: Regenerate.
165 * cris/semcrisv10f-switch.c: Regenerate.
166 * cris/semcrisv32f-switch.c: Regenerate.
168 2009-10-22 Tristan Gingold <gingold@adacore.com>
170 * avr/interp.c (sim_stop): Return 1.
172 2009-10-16 Doug Evans <dje@sebabeach.org>
174 * MAINTAINERS: Add myself as m32r maintainer.
176 2009-10-15 Michael Egaer <eager@eagercon.com>
178 * MAINTAINERS: Add self as MicroBlaze maintainer.
180 2009-10-14 Ben Elliston <bje@gnu.org>
182 * MAINTAINERS (common): Move myself to "past maintainers" section.
184 2009-10-06 Michael Eager <eager@eagercon.com>
186 * microblaze/interp.c: Add include microblaze-dis.h.
188 2009-09-23 Michael Eager <eager@eagercon.com>
190 * configure: Add microblaze-*.* (not regenerated).
191 * configure.ac: Likewise.
192 * microblaze/config.in: New.
193 * microblaze/configure: Generate.
194 * microblaze/configure.ac: New.
195 * microblaze/interp.c: New.
196 * microblaze/Makefile.in: New.
197 * microblaze/microblaze.h: New.
198 * microblaze/microblaze.isa: New.
199 * microblaze/sim-main.h: New.
200 * microblaze/sysdep.h: New.
202 2009-08-22 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
204 * avr/config.in: Regenerate.
205 * avr/configure: Likewise.
206 * configure: Likewise.
207 * cris/config.in: Likewise.
208 * cris/configure: Likewise.
210 * configure.ac: m4_include toplevel config/override.m4.
211 * configure: Regenerate.
212 * avr/configure: Regenerate.
213 * cris/configure: Regenerate.
215 2009-07-30 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
217 * Makefile.in (datarootdir): New variable.
219 2009-05-18 Jon Beniston <jon@beniston.com>
221 * MAINTAINERS: Add Jon Beniston as maintainer of lm32 sim.
222 * configure.ac: Add lm32 target.
223 * lm32: New directory.
225 2009-05-11 Andrew Cagney <cagney@gnu.org>
227 * MAINTAINERS: Orphan ppc.
229 2009-05-08 Kevin Buettner <kevinb@redhat.com>
231 * m32c/gdb-if.c (m32c_signal_to_host): Rename to
232 m32c_signal_to_target. Change signal return values from SIGILL,
233 SIGTRAP, SIGSEGV, etc. to TARGET_SIGNAL_ILL, TARGET_SIGNAL_TRAP,
234 TARGET_SIGNAL_SEGV, etc. Fix all callers.
236 2009-04-30 Anthony Green <green@moxielogic.com>
238 * MAINTAINERS: Add myself for the moxie port.
239 * moxie: New directory.
240 * configure.ac: Add entry for moxie.
241 * configure: Regenerate.
243 2009-04-27 Tristan Gingold <gingold@adacore.com>
245 * avr: New directory.
246 * avr/interp.c, avr/Makefile.in, avr/configure.ac: New files.
247 * avr/config.in: New file, generated by autoheader.
248 * avr/configure: New file generated by autoconf.
249 * configure.ac: Add avr.
250 * configure: Regenerated.
252 2009-04-17 Carlos O'Donell <carlos@codesourcery.com>
254 * Makefile.in: Add dummy install-pdf, html, and
255 install-html targets.
257 2009-01-18 Hans-Peter Nilsson <hp@axis.com>
259 * cris/sim-if.c: Include errno.h.
260 (cris_start_address, cris_program_offset): New variables.
261 (OPTION_CRIS_PROGRAM_OFFSET, OPTION_CRIS_STARTADDR): New option
263 (cris_options): New options --cris-program-offset and
264 --cris-start-address.
265 (cris_option_handler): Handle new options.
266 (cris_program_offset_write, cris_set_section_offset_iterator)
267 (cris_offset_sections, cris_offset_sections): New functions.
268 (sim_load): Use cris_program_offset_write as function argument to
269 cris_load_elf_file, not sim_write.
270 (struct offsetinfo): New struct.
271 (cris_handle_interpreter): Fix typo in comment.
272 (sim_open): Call cris_offset_sections as soon as the bfd of the
273 infile is available. Gate bfd validity checks on abfd non-NULL.
274 (sim_create_inferior): Let cris_start_address when != -1 override
275 other start-address choices.
277 2009-01-06 Hans-Peter Nilsson <hp@axis.com>
279 * cris/traps.c (abort): Define to call sim_io_error.
280 (create_map): Make -1 imply a non-fixed address, not 0. All
281 callers changed. Only prefer the next higher unmapped address if
282 the last mapped address is no less than 0x40000000. Check that
283 the address to be mapped is not already mapped. Update head
285 (unmap_pages): Don't call abort when recursive call fails, just
286 note and return an error if a page in the range couldn't be unmapped.
287 (cris_bmod_handler, h_supr_set_handler, h_supr_get_handler)
288 (schedule, make_first_thread, cris_pipe_empty): New local variable sd.
289 (cris_break_13_handler) <case TARGET_SYS_mmap2>: Handle
290 non-MAP_FIXED argument overlapping existing map. For MAP_FIXED,
291 don't abort on page not being mapped. Handle non-anon filemap
292 with length padded to pagesize.
294 2009-01-03 Hans-Peter Nilsson <hp@axis.com>
296 * cris/sim-if.c (TARGET_AT_NULL, TARGET_AT_PHDR, TARGET_AT_PHENT)
297 (TARGET_AT_PHNUM, TARGET_AT_PAGESZ, TARGET_AT_BASE)
298 (TARGET_AT_FLAGS, TARGET_AT_ENTRY, TARGET_AT_UID, TARGET_AT_EUID)
299 (TARGET_AT_GID, TARGET_AT_EGID, TARGET_AT_HWCAP)
300 (TARGET_AT_CLKTCK): Remove redundant macros.
301 (AUX_ENT): Adjust to use standard ELF AT_* macros.
302 (AUX_ENTF): Ditto. Remove always-0 middle argument. Update all
304 (sim_open): Also pass AT_SECURE.
306 * cris/sim-main.h (struct _sim_cpu): New member
307 set_target_thread_data.
308 * cris/crisv32f.c (CRIS_TLS_REGISTER): Define.
309 * cris/crisv10f.c: Ditto.
310 * cris/cris-tmpl.c (MY (set_target_thread_data)): New function.
311 (MY (f_specific_init)): Set new _sim_cpu member to new function.
312 * cris/traps.c (TARGET_SYS_set_thread_area): Define.
313 (cris_break_13_handler) <case TARGET_SYS_set_thread_area>: New
316 * cris/traps.c (TARGET_SYS_exit_group): Define.
317 (cris_break_13_handler): Handle it like the exit for the last
320 * cris/traps.c (TARGET_UTSNAME): Update to 2009-01-01.
321 (TARGET_EPOCH): Update to match TARGET_UTSNAME. Correct comment.
322 (cris_break_13_handler) <case TARGET_SYS_uname>: Update to
323 2.6.27. Set machine field to the BFD printable name of the
326 * cris/traps.c (TARGET_MAP_DENYWRITE): Define.
327 (cris_break_13_handler) <case TARGET_SYS_mmap2>: Handle
328 TARGET_MAP_DENYWRITE.
330 * cris/traps.c (TARGET_SYS_access, TARGET_R_OK, TARGET_W_OK)
331 (TARGET_X_OK, TARGET_F_OK): Define.
332 (cris_break_13_handler) <case TARGET_SYS_access>: New case.
334 * cris/semcrisv32f-switch.c: Regenerate.
336 2008-12-30 Hans-Peter Nilsson <hp@axis.com>
338 * cris/sim-if.c (sim_open): If sim_analyze_program fails, emit
339 just a short CRIS-specific notice. Tweak the wording for a
340 failing architecture test.
342 * cris/traps.c (TARGET_SYS_writev): New macro.
343 (is_mapped_only, cris_dump_map): New functions.
344 (cris_break_13_handler) <case TARGET_SYS_mmap2>: Handle more flags
345 and prot combinations and a non-zero page-offset. If
346 TARGET_MAP_FIXED, unmap pages before mapping them.
347 <case TARGET_SYS_mprotect>: When checking, allow any length
348 argument. Don't actually do anything.
349 <case TARGET_SYS_writev>: New case.
351 * cris/Makefile.in (SIM_OBJS): Remove sim-hload.o.
352 * cris/sim-if.c: Include elf-bfd.h.
353 (struct progbounds): New members end_loadmem, start_nonloadmem.
354 (xprintf, eprintf): New functions, copied from common/sim-load.c.
355 (cris_load_elf_file, sim_load, cris_get_progbounds): New functions.
356 (get_progbounds_iterator): Renamed from get_progbounds. Make
357 static. Update head comment. Set new struct progbounds members.
358 (exec_load_addr, interp_load_addr, interp_start_addr): New static
360 (aux_ent_phdr, aux_ent_phent, aux_ent_phnum, aux_ent_base)
361 (aux_ent_entry, cris_write_interp, cris_handle_interpreter): New
363 (sim_open): New constant array auxv_entries. Rewrite AUX_ENT
364 handling to use auxv_entries. Improve error message and checking
365 for invalid programs. Use new variable abfd for the program
366 instead of for each access reaching into sd to get it.
367 (sim_create_inferior): If non-zero, use interp_start_addr instead
368 of the program start address.
369 (cris_disassemble_insn): Remove incorrect and unclear, supposedly
370 stale comment. Always specify little-endian.
372 2008-07-29 Nick Clifton <nickc@redhat.com>
374 * common/genmloop.sh: Add new parameter: -shell to specify the
375 command interpreter to use to run the input file. This is
376 necessary because otherwise SHELL is taken from the user's
377 environment, and not from the makefile that invoked this script
378 and the user might not be running an sh-like shell.
379 * cris/Makefile.in: Pass -shell parameter to genmloop.sh.
380 * fr30/Makefile.in: Likewise.
381 * frv/Makefile.in: Likewise.
382 * i960/Makefile.in: Likewise.
383 * iq2000/Makefile.in: Likewise.
384 * m32r/Makefile.in: Likewise.
386 * frv/mloop.in: Add missing start of line comment marker.
388 2008-07-11 Hans-Peter Nilsson <hp@axis.com>
390 * cris/configure: Regenerate to track ../common/common.m4 changes.
391 * cris/config.in: Ditto.
393 2008-06-06 Vladimir Prus <vladimir@codesourcery.com>
394 Daniel Jacobowitz <dan@codesourcery.com>
395 Joseph Myers <joseph@codesourcery.com>
397 * cris/configure: Regenerate.
399 2008-05-09 Olivier Hainque <hainque@adacore.com>
401 * ppc/altivec.igen (vperm): Latch inputs into temporaries.
403 2008-03-25 M R Swami Reddy <MR.Swami.Reddy@nsc.com>
405 * MAINTAINERS: Add myself as maintainer of cr16 port.
407 2008-02-12 M Ranga Swami Reddy <MR.Swami.Reddy@nsc.com>
409 Add simulator for National cr16 processor.
410 * cr16: New directory.
411 * configure.ac: Add entry for National cr16.
412 * configure: Regenerate.
414 2008-02-05 DJ Delorie <dj@redhat.com>
416 * configure.ac (v850): V850 now has a testsuite.
417 * configure (v850): Likewise.
419 2008-01-01 Daniel Jacobowitz <dan@codesourcery.com>
421 Updated copyright notices for most files.
423 2007-12-19 DJ Delorie <dj@redhat.com>
425 * frv/frv.c (frvbf_cut): Only look at the six LSBs of
428 2007-10-22 Hans-Peter Nilsson <hp@axis.com>
430 * cris/arch.c, cris/arch.h, cris/cpuall.h, cris/cpuv10.c,
431 cris/cpuv10.h, cris/cpuv32.c, cris/cpuv32.h, cris/cris-desc.c,
432 cris/cris-desc.h, cris/cris-opc.h, cris/decodev10.c,
433 cris/decodev10.h, cris/decodev32.c, cris/decodev32.h,
434 cris/modelv10.c, cris/modelv32.c, cris/semcrisv10f-switch.c,
435 cris/semcrisv32f-switch.c: Regenerate.
437 2007-08-24 Joel Brobecker <brobecker@adacore.com>
439 Switch the license of all files explicitly copyright the FSF
442 2007-03-27 Brooks Moses <brooks.moses@codesourcery.com>
444 * Makefile.in: Add dummy "pdf" target.
446 2007-02-20 Hans-Peter Nilsson <hp@axis.com>
448 * cris/traps.c (dump_statistics): Change format for cycle numbers
449 to %llu and cast parameters to unsigned long long.
451 2007-02-16 Thiemo Seufer <ths@mips.com>
453 * Makefile.in (FLAGS_TO_PASS, TARGET_FLAGS_TO_PASS): Add RUNTEST.
455 2007-01-28 Manuel Lauss <slauss@resi.at>
457 * configure.ac (sh64-*-*): Change to sh64*-*-*.
458 (sh-*-*): Change to sh*-*-*.
459 * configure: Regenerated.
461 2007-01-09 Daniel Jacobowitz <dan@codesourcery.com>
463 Updated copyright notices for most files.
465 2006-12-20 Hans-Peter Nilsson <hp@axis.com>
467 * Makefile.in (autoconf-common autoheader-common): Only run
468 autoheader on subdirs with a file config.in.
470 * configure.ac (common): Make the default "yes" for all targets
472 * configure: Regenerate.
474 * Makefile.in (autoconf-common autoheader-common): In documented
475 usage, say SHELL=/bin/sh.
476 (.PHONY): Add autoheader-common.
478 * MAINTAINERS: Add self as authorized committer for *.
480 2006-10-02 Edgar E. Iglesias <edgar@axis.com>
481 Hans-Peter Nilsson <hp@axis.com>
483 * cris/cris-sim.h (enum cris_unknown_syscall_action_type)
484 (cris_unknown_syscall_action): Declare.
485 * cris/sim-if.c (cris_unknown_syscall_action): Define.
486 (cris_options): Add cris-unknown-syscall option.
487 (cris_option_handler): Correct comment about and error message for
488 invalid --cris-cycles argument. Handle --cris-unknown-syscall.
489 * cris/traps.c: Include stdarg.h
490 (cris_unknown_syscall): New function.
491 (cris_break_13_handler): Instead of sim_io_eprintf and
492 sim_engine_halt, call cris_unknown_syscall to handle more or less
493 unknown syscalls. Adjust code as necessary to handle return
496 2006-09-30 Daniel Jacobowitz <dan@codesourcery.com>
498 * MAINTAINERS: Add Dave Brolley for sh64.
500 2006-09-30 Hans-Peter Nilsson <hp@axis.com>
502 * cris/traps.c (TARGET_PIPE_BUF): New macro.
503 (cris_pipe_empty): Correct initialization of "remaining". Only
504 adjust the "write" return value if more than TARGET_PIPE_BUF bytes
507 2006-09-29 Hans-Peter Nilsson <hp@axis.com>
509 * cris/configure.ac: Check for limits.h and sys/param.h.
510 * cris/configure, cris/config.in: Rebuild.
511 * cris/traps.c (SIM_PATHMAX): New macro.
512 (cris_break_13_handler): Use SIM_PATHMAX, not MAXPATHLEN.
514 2006-08-08 Joel Sherrill <joel.sherrill@oarcorp.com>
516 * configure.ac (sparc-*-rtems*|sparc-*-elf*): Enable erc32 simulator.
517 * Makefile.in (FLAGS_TO_PASS): Include libdir.
518 * configure: Regenerated.
520 2006-06-05 Daniel Jacobowitz <dan@codesourcery.com>
522 * cris/configure: Regenerated.
524 2006-05-31 Daniel Jacobowitz <dan@codesourcery.com>
526 * cris/configure: Regenerated.
528 2006-05-05 Andreas Schwab <schwab@suse.de>
530 * configure.ac (CFLAGS_FOR_BUILD): Set and substitute.
531 * configure: Regenerate.
533 * Makefile.in (CFLAGS_FOR_BUILD): Define.
534 (CC_FOR_BUILD): Don't override.
535 (FLAGS_TO_PASS): Pass CFLAGS_FOR_BUILD.
537 2006-05-04 Daniel Jacobowitz <dan@codesourcery.com>
539 * MAINTAINERS: Add an "Authorized committers" section, and list
542 2006-04-08 Hans-Peter Nilsson <hp@axis.com>
544 * cris/crisv32f.c (MY (deliver_interrupt)): Set CCS to new_ccs.
546 2006-04-03 Hans-Peter Nilsson <hp@axis.com>
548 * cris/dv-cris.c, cris/dv-rv.c, cris/rvdummy.c: New files.
549 * cris/Makefile.in (CONFIG_DEVICES): Remove redundant setting.
550 (dv-cris.o, dv-rv.o rvdummy$(EXEEXT), rvdummy.o): New rules.
551 (all): Depend on rvdummy$(EXEEXT).
552 * cris/configure.ac: Call SIM_AC_OPTION_WARNINGS. Check for
553 sys/socket.h and sys/select.h. Call SIM_AC_OPTION_HARDWARE,
555 * cris/configure: Regenerate.
556 * cris/cris-sim.h (cris_have_900000xxif): Declare here.
557 (enum cris_interrupt_type, crisv10deliver_interrupt)
558 (crisv32deliver_interrupt: New declarations.
559 * cris/cris-tmpl.c [WITH_HW] (MY (f_model_insn_after)): Call
560 sim_events_tickn and set state-events member work_pending when it's
561 time for the next event.
562 [WITH_HW] (MY (f_specific_init)): Set CPU-model-specific
563 interrupt-delivery function.
564 * cris/crisv10f.c (MY (deliver_interrupt)): New function.
565 * cris/crisv32f.c (MY (deliver_interrupt)): New function.
566 * cris/devices.c: Include hw-device.h.
567 (device_io_read_buffer) [WITH_HW]: Call hw_io_read_buffer.
568 (device_io_write_buffer): Only perform 0x900000xx-functions if
569 cris_have_900000xxif is nonzero. Else if WITH_HW defined,
570 call hw_io_write_buffer. Add return 0 last in function.
571 * cris/sim-if.c (cris_have_900000xxif): Now global.
572 (sim_open) [WITH_HW]: Clear deliver_interrupt cpu member.
573 Force "-model" option, effectively.
574 * cris/sim-main.h (cris_interrupt_delivery_fn): New type.
575 (struct _sim_cpu) [WITH_HW]: New member deliver_interrupt.
577 2006-04-02 Hans-Peter Nilsson <hp@axis.com>
579 * cris/Makefile.in (CRISV10F_OBJS): Remove semcrisv10f-switch.o.
580 (CRISV32F_OBJS): Remove semcrisv32f-switch.o.
581 (semcrisv10f-switch.o, semcrisv32f-switch.o: Remove dependency rules.
583 2006-03-13 DJ Delorie <dj@redhat.com>
585 * MAINTAINERS: Add self as m32c sim maintainer.
587 2006-02-23 Hans-Peter Nilsson <hp@axis.com>
589 * cris/traps.c (syscall_map): Remove CB_SYS_time / TARGET_SYS_time
591 (cris_break_13_handler) <case TARGET_SYS_time>: New case.
593 2006-01-23 Jim Blandy <jimb@redhat.com>
595 Add simulator for Renesas M32C and M16C.
597 * m32c: New directory.
598 * configure.ac: Add entry for Renesas M32C.
599 * configure: Regenerate.
601 2006-01-10 Hans-Peter Nilsson <hp@axis.com>
603 * cris/cris-tmpl.c (MY (f_model_insn_before)): Only display basic
604 cycle count for the current insn.
606 2005-12-06 Hans-Peter Nilsson <hp@axis.com>
608 * cris/cpuv10.h, cris/cpuv32.h, cris/cris-desc.c, cris/cris-opc.h,
609 cris/decodev10.c, cris/decodev10.h, cris/decodev32.c,
610 cris/decodev32.h, cris/modelv10.c, cris/modelv32.c,
611 cris/semcrisv10f-switch.c, cris/semcrisv32f-switch.c: Regenerate.
613 2005-12-05 Hans-Peter Nilsson <hp@axis.com>
615 * cris/arch.c, cris/arch.h, cris/cpuall.h, cris/cpuv10.c,
616 cris/cpuv10.h, cris/cpuv32.c, cris/cpuv32.h, cris/cris-desc.c,
617 cris/cris-desc.h, cris/cris-opc.h, cris/decodev10.c,
618 cris/decodev10.h, cris/decodev32.c, cris/decodev32.h,
619 cris/modelv10.c, cris/modelv32.c, cris/semcrisv10f-switch.c,
620 cris/semcrisv32f-switch.c: Regenerate.
622 2005-11-20 Hans-Peter Nilsson <hp@axis.com>
624 * cris/traps.c (TARGET_O_RDONLY, TARGET_O_WRONLY): Define.
625 (open_map): Use TARGET_O_ACCMODE, TARGET_O_RDONLY and
627 (cris_break_13_handler) <case TARGET_SYS_fcntl>: Add support for
628 F_GETFL on fd 0, 1 and 2.
630 2005-11-17 Hans-Peter Nilsson <hp@axis.com>
632 * cris/sim-main.h (struct _sim_cpu): New members last_syscall,
633 last_open_fd, last_open_flags.
634 * cris/traps.c: Don't include targ-vals.h.
635 (TARGET_O_ACCMODE): Define.
636 (cris_break_13_handler): Set new _sim_cpu members.
637 <case TARGET_SYS_fcntl>: Support special case of F_GETFL.
638 Rearrange code as switch. Emit "unimplemented" abort for
639 unimplemented fcntl calls.
641 * cris/traps.c (TARGET_SYS_stat): Define.
642 (syscall_stat32_map): Add entry for TARGET_SYS_stat.
643 (cris_break_13_handler) <case TARGET_SYS_stat>: New case.
645 2005-11-16 Hans-Peter Nilsson <hp@axis.com>
647 * cris/cris-tmpl.c (MY (f_model_insn_before)): Make sure only the
648 low 32 bits are used after an unsigned long cast.
650 2005-05-28 Hans-Peter Nilsson <hp@axis.com>
652 * cris/Makefile.in (stamp-v32fmloop): Depend on stamp-v10fmloop.
654 2005-05-26 Chris Demetriou <cgd@netbsd.org>
656 * MAINTAINERS: Update my mail address, move myself to the
657 "Past maintainers" section.
659 2005-05-17 Corinna Vinschen <vinschen@redhat.com>
661 * configure.ac: Add igen to v850 build.
662 * configure: Regenerate.
664 2005-04-29 Paul Brook <paul@codesourcery.com>
666 * common/callback.c (PIPE_BUF): Provide default definition.
667 (os_lstat): Use stat if lstat is not available on the host.
668 (os_ftruncate): Return EINVAL if not available on the host.
669 (os_truncate): Ditto.
670 * common/configure.ac: Check for lstat, truncate and ftruncate.
671 * common/configure: Regenerate.
672 * common/config.in: Regenerate.
674 2005-04-27 Paul Brook <paul@codesourcery.com>
676 * common/Make-common.in: Add $(EXEEXT) to "run".
678 2005-04-18 Hans-Peter Nilsson <hp@axis.com>
680 * cris/traps.c (cris_break_13_handler) <case TARGET_SYS_mmap2>:
681 For ((len & 8191) != 0 && fd == (USI) -1), don't say this isn't
682 implemented. In call to create_map, pad length argument to 8k.
684 2005-04-15 Corinna Vinschen <vinschen@redhat.com>
686 * configure.ac: Add explicit sh64 case.
687 * configure: Regenerate.
689 2005-03-30 Paul Brook <paul@codesourcery.com>
691 * arm/wrapper.c: Provide SIGTRAP and SIGBUS.
693 2005-03-24 Hans-Peter Nilsson <hp@axis.com>
695 * cris/Makefile.in (stamp-v10fcpu, stamp-v32fcpu): Add kludge to
696 include cgen-ops.h in decodev10.c and decodev32.c.
697 * cris/sim-main.h: Don't include cgen-ops.h here.
698 * cris/arch.c, cris/arch.h, cris/cpuall.h, cris/cpuv10.c,
699 cris/cpuv10.h, cris/cpuv32.c, cris/cpuv32.h, cris/cris-desc.c,
700 cris/cris-desc.h, cris/cris-opc.h, cris/decodev10.c,
701 cris/decodev10.h, cris/decodev32.c, cris/decodev32.h,
702 cris/modelv10.c, cris/modelv32.c, cris/semcrisv10f-switch.c,
703 cris/semcrisv32f-switch.c: Regenerate.
705 * cris/traps.c (cris_break_13_handler) <case
706 TARGET_SYS_rt_sigaction>: Rename sa_handler, sa_flags,
707 sa_restorer, sa_mask_low, sa_mask_high to target_sa_handler etc.
709 2005-03-23 Mark Kettenis <kettenis@gnu.org>
711 * cris/configure: Regenerate.
713 2005-02-28 Jim Blandy <jimb@redhat.com>
715 * d10v/configure.ac, igen/configure.ac, m68hc11/configure.ac,
716 mips/configure.ac, mn10300/configure.ac, v850/configure.ac:
717 Regenerated, after change to common/aclocal.m4.
719 2005-02-18 Corinna Vinschen <vinschen@redhat.com>
721 * iq2000: New target subdirectory.
722 * configure.ac: Add iq2000 target.
723 * configure: Regenerate.
725 2005-01-29 Hans-Peter Nilsson <hp@axis.com>
727 * Makefile.in (all, clean mostlyclean, distclean maintainer-clean)
728 (realclean, install): Fail if subdir make failed.
730 2005-01-28 Hans-Peter Nilsson <hp@axis.com>
732 * cris: New directory, simulator for Axis Communications CRIS
733 including CRIS v32, CGEN-based.
734 * configure.ac: Add corresponding configury.
735 * configure: Regenerate.
737 2005-01-17 Andrew Cagney <cagney@gnu.org>
739 * configure.ac: For mips*-*-* and mn10300*-*-* configure the
740 common directory. Remove sparc*-*-* from list.
742 2005-01-11 Andrew Cagney <cagney@gnu.org>
744 * Makefile.in (autoconf-common autoheader-common): Add --force to
745 autoconf and autoheader.
746 (autoconf-common autoheader-common)
747 (autoconf-install autoheader-install): Check for configure.ac, not
749 * configure.ac: Delete AC_CONFIG_AUX_DIR.
750 * configure: Re-generate.
752 2005-01-07 Andrew Cagney <cagney@gnu.org>
754 * configure.ac: Replace configure.in. Requires autoconf 2.59 and
755 correctly calls AC_CONFIG_SUBDIRS.
756 * configure: Re-generate.
758 2004-12-01 Andrew Cagney <cagney@gnu.org>
760 * i960, h8500: Delete directory.
762 2004-11-12 Andrew Cagney <cagney@gnu.org>
764 * d30v, fr30, mn10200, z8k: Delete directory.
766 2004-03-10 Ben Elliston <bje@gnu.org>
768 * MAINTAINERS: Update my mail address.
770 2004-01-26 Chris Demetriou <cgd@broadcom.com>
772 * configure.in (mips*-*-*): Configure in testsuite.
773 * configure: Regenerate.
775 2003-10-08 Dave Brolley <brolley@redhat.com>
777 * configure.in: Move frv handling to alphabetically correct placement.
779 2003-09-03 Andreas Schwab <schwab@suse.de>
781 * Makefile.in (FLAGS_TO_PASS): Pass down $(bindir) and $(mandir).
783 2003-08-29 Dave Brolley <brolley@redhat.com>
785 * MAINTAINERS: Add myself as maintainer of the FRV port.
787 2003-08-20 Michael Snyder <msnyder@redhat.com>
788 Dave Brolley <brolley@redhat.com>
790 * frv/: New directory, simulator for the Fujitsu FRV.
791 * configure.in: Add frv configury.
792 * configure: Regenerate.
794 2003-08-10 Ben Elliston <bje@wasabisystems.com>
796 * MAINTAINERS: Update my mail address.
798 2003-08-09 Andrew Cagney <cagney@redhat.com>
800 * MAINTAINERS: Andrew Cagney (mips) and Geoff Keating (ppc) drop
801 maintenance. List igen and sh maintainers. Mention that target
802 and global maintainers pick up the slack.
804 2003-07-09 Michael Snyder <msnyder@redhat.com>
806 * configure.in: Add testsuite to extra_subdirs for sh.
807 * configure: Regenerate.
809 2003-01-23 Nick Clifton <nickc@redhat.com>
813 2002-04-02 Alexandre Oliva <aoliva@redhat.com>
815 * sh/gencode.c: Replace sh3e with sh2e except in fsqrt.
817 2002-08-24 Geoffrey Keating <geoffk@redhat.com>
819 * MAINTAINERS: Update my email address.
821 2002-07-17 Andrew Cagney <ac131313@redhat.com>
823 * w65/: Delete directory.
825 2002-07-16 Andrew Cagney <ac131313@redhat.com>
827 * configure.in (extra_subdirs): Mark fr30-*-* as obsolete.
828 * configure: Re-generate.
830 2002-07-13 Andrew Cagney <ac131313@redhat.com>
832 * configure.in (extra_subdirs): Mark d30v-*-* as obsolete.
833 * configure: Re-generate.
835 2002-06-16 Andrew Cagney <ac131313@redhat.com>
837 * Makefile.in (autoconf-changelog autoheader-changelog): Let name,
838 id, date and host to be overriden by NAME, ID, DATE and HOST
839 respectfully. Use ISO dates.
841 Thu Jun 6 12:34:13 2002 Andrew Cagney <cagney@redhat.com>
843 * Makefile.in (ChangeLog): New makefile variable.
844 * README-HACKING: Mention the ChangeLog makefile variable.
846 2002-06-01 Andrew Cagney <ac131313@redhat.com>
848 * tic80/: Delete directory.
850 2002-05-16 Stephane Carrez <stcarrez@nerim.fr>
852 * MAINTAINERS: Update my email address.
854 2002-03-06 Stephane Carrez <Stephane.Carrez@worldnet.fr>
856 * MAINTAINERS: Record self as maintainer of m68hc11 simulator.
858 2002-03-01 Frank Ch. Eigler <fche@redhat.com>
860 * MAINTAINERS: Record self as a co-maintainer of just common/.
862 2002-02-07 Nick Clifton <nickc@cambridge.redhat.com>
864 * MAINTAINERS: Point to GDB files describing overall maintaince
865 and check-in procedures.
867 2002-01-10 Nick Clifton <nickc@cambridge.redhat.com>
869 * MAINTAINERS: Add myself for ARM portions.
871 2001-10-19 Andrew Cagney <ac131313@redhat.com>
873 * configure.in: When Linux or NetBSD, enable PowerPC simulator.
874 * configure: Re-generate.
876 2001-02-16 Ben Elliston <bje@redhat.com>
878 * MAINTAINERS: Add myself for common portions.
880 2001-01-15 Chris Demetriou <cgd@broadcom.com>
882 * MAINTAINERS: Added self and Andrew for the mips sim.
884 2000-10-25 Geoff Keating <geoffk@cygnus.com>
886 * MAINTAINERS: Added self and Andrew for the ppc sim.
888 Thu Jul 27 21:26:26 2000 Andrew Cagney <cagney@b1.cygnus.com>
890 From Stephane Carrez <Stephane.Carrez@worldnet.fr>:
891 * m68hc11: New directory.
893 * configure: Regenerate.
895 Tue Jul 4 13:43:54 2000 Andrew Cagney <cagney@b1.cygnus.com>
897 * tic80: New directory.
898 * configure.in: Add configury.
899 * configure: Regenerate.
901 2000-04-20 Nick Clifton <nickc@cygnus.com>
903 * configure.in (extra_subdirs): Add testsuite to strongarm
905 * configure: Regenerate.
907 Sat Mar 4 16:48:54 2000 Andrew Cagney <cagney@b1.cygnus.com>
909 * MAINTAINERS: New file. Blank.
911 1999-11-18 Ben Elliston <bje@cygnus.com>
913 * configure.in: Require autoconf 2.13 and remove obsolete
914 invocation of AC_C_CROSS.
915 * configure: Regenerate.
917 1999-09-29 Doug Evans <devans@casey.cygnus.com>
919 * configure.in: Configure the testsuite directory for thumb.
920 * configure: Regenerate.
922 1999-07-16 Ben Elliston <bje@cygnus.com>
924 * configure.in: Configure the testsuite directory for arm.
925 * configure: Regenerate.
927 1999-04-08 Nick Clifton <nickc@cygnus.com>
929 * configure.in: Add support for MCore target.
930 * configure: Regenerate.
932 1999-03-14 Stan Shebs <shebs@andros.cygnus.com>
934 * Makefile.in (FLAGS_TO_PASS, TARGET_FLAGS_TO_PASS): Remove
935 RUNTEST instead of commenting out, fixes portability problem.
937 1999-02-08 Nick Clifton <nickc@cygnus.com>
939 * configure.in: Add support for StrongARM target.
940 * configure: Regenerate.
942 1999-01-04 Jason Molenda (jsm@bugshack.cygnus.com)
944 * configure.in: Require autoconf 2.12.1 or higher.
946 1998-12-08 James E Wilson <wilson@wilson-pc.cygnus.com>
948 * configure.in (i960-*-*): Add.
949 * configure: Rebuild.
951 Wed Nov 4 19:11:43 1998 Dave Brolley <brolley@cygnus.com>
953 * configure.in: Added case for fr30-*-*.
954 * configure: Regenerated.
956 Fri Sep 25 10:12:19 1998 Christopher Faylor <cgf@cygnus.com>
958 * ppc/Makefile.in: Add EXEEXT to installed powerpc-eabi-run program
959 to allow successful operation on Windows.
961 Thu May 28 14:59:46 1998 Jillian Ye <jillian@cygnus.com>
963 * Makefile.in: Take RUNTEST out of FLAGS_TO_PASS so that make
964 check can be invoked recursively.
966 Wed Apr 29 12:38:53 1998 Mark Alexander <marka@cygnus.com>
968 * configure.in: Build simulator on sparclite and sparc86x targets.
969 * configure: Regenerate.
971 Sun Apr 26 15:21:01 1998 Tom Tromey <tromey@cygnus.com>
973 * Makefile.in (autoconf-common autoheader-common): Don't pass -l
974 to autoconf and autoheader.
976 Fri Apr 24 11:14:13 1998 Tom Tromey <tromey@cygnus.com>
978 * Makefile.in (autoconf-common autoheader-common): Pass `-l
979 ../common' to autoconf and autoheader. Unconditionally run
980 autoconf in every subdir.
981 (autoconf-changelog autoheader-changelog): Unconditionally run
982 commands in every subdir.
983 (autoconf-install autoheader-install): Likewise.
985 Tue Mar 24 17:12:43 1998 Stu Grossman <grossman@bhuna.cygnus.co.uk>
987 * Makefile.in: Get SHELL from configure.
988 * (FLAGS_TO_PASS): Pass down SHELL.
989 * configure: Regenerate with autoconf 2.12.1 to fix shell issues for
992 Tue Mar 24 11::18:00 1998 Joyce Janczyn <janczyn@cygnus.com>
994 * configure.in (extra_subdirs): Enable igen for mn10300.
995 * configure: Re-generate.
997 Tue Dec 2 10:10:42 1997 Nick Clifton <nickc@cygnus.com>
999 * configure.in (extra_subdirs): Add support for thumb target.
1001 * configure (extra_subdirs): Add support for thumb target.
1003 Wed Oct 8 12:38:48 1997 Andrew Cagney <cagney@b1.cygnus.com>
1005 * configure.in (extra_subdirs): Add IGEN directory when MIPS
1007 * configure: Regenerate.
1009 Fri Sep 12 13:10:31 1997 Andrew Cagney <cagney@b1.cygnus.com>
1011 * configure.in (extra_subdirs): v850ea needs igen.
1012 * configure: Re-generate.
1014 Mon Sep 1 16:48:23 1997 Andrew Cagney <cagney@b1.cygnus.com>
1016 * configure.in (testdir): When a testsuite directory, add that to
1017 the list of confdirs.
1019 Tue Aug 19 11:17:46 1997 Andrew Cagney <cagney@b1.cygnus.com>
1021 * configure.in (extra_subdirs): Enable igen ready for V850.
1023 Tue Aug 26 15:14:48 1997 Andrew Cagney <cagney@b1.cygnus.com>
1025 * configure.in (w65-*-*, only_if_enabled): Set.
1026 * configure: Re-generate.
1028 Mon Aug 25 16:26:53 1997 Andrew Cagney <cagney@b1.cygnus.com>
1030 * configure.in (sparc*-*-*, only_if_enabled): Set
1031 only_if_enabled=yes. Check only_if_enabled before enabling a
1033 * configure: Regenerate.
1035 Mon Aug 18 10:56:59 1997 Nick Clifton <nickc@cygnus.com>
1037 * configure.in (extra_subdirs): Add v850e target.
1039 Mon Aug 18 10:56:59 1997 Nick Clifton <nickc@cygnus.com>
1041 * configure.in (extra_subdirs): Add v850ea target.
1043 Fri Jul 25 11:40:47 1997 Doug Evans <dje@canuck.cygnus.com>
1045 * configure.in (sparc*-*-*): Don't build erc32.
1046 * configure: Regenerate.
1048 Thu Apr 24 00:47:20 1997 Doug Evans <dje@canuck.cygnus.com>
1050 * configure.in (m32r-*-*): New target.
1051 * configure: Regenerate.
1053 * Makefile.in (autoconf-common, autoconf-changelog): Change $* to $@.
1055 Mon Apr 21 22:57:55 1997 Andrew Cagney <cagney@b1.cygnus.com>
1057 * Makefile.in (.NOEXPORT, MAKEOVERRIDES): Moved to end, BSD make
1058 thought that .NOEXPORT was the default target.
1060 Fri Apr 11 17:18:07 1997 Ian Lance Taylor <ian@cygnus.com>
1062 * Makefile.in (clean mostlyclean): Restore targets accidentally
1063 deleted in earlier change.
1065 Thu Apr 3 12:20:32 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
1067 * Makefile.in (autoheader-common, autoheader-changelog,
1068 autoheader-install): Perform autoheader in addition to autoconf.
1070 Wed Apr 2 15:09:05 1997 Doug Evans <dje@canuck.cygnus.com>
1072 * Makefile.in (autoconf-install): New target.
1073 (autoconf-changelog): Try different way to obtain user name.
1075 Wed Apr 2 14:25:52 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
1077 * Makefile.in (autoconf-changelog): New target, update
1078 ChangeLog for all subdirectories - normally used after
1079 autoconf-common target.
1081 Wed Mar 19 14:26:21 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
1083 * configure.in (extra_subdirs): Include testsuite for d30v.
1084 * configure: Regenerate.
1086 * Makefile.in (RUNTEST, RUNTESTFLAGS): Borrow test rules from
1088 (check): New rules - drive the testsuite.
1090 Mon Mar 3 13:01:00 1997 Jeffrey A Law (law@cygnus.com)
1092 * configure.in: Add mn10200 configure lines accidentally
1094 * configure: Regenerated.
1096 Wed Feb 19 10:34:20 1997 Andrew Cagney <cagney@critters.cygnus.com>
1098 * configure.in (extra_subdirs): Generalize common sub directory
1100 (extra_subdirs): For d30v add igen to the list to be built.
1102 Sun Feb 16 16:37:47 1997 Andrew Cagney <cagney@critters.cygnus.com>
1104 * configure.in (d30v): New target.
1105 * configure: Regenerated.
1107 Wed Feb 19 23:17:13 1997 Jeffrey A Law (law@cygnus.com)
1109 * configure.in: Don't require GCC to build the mn10200
1111 * configure: Rebuilt.
1113 Wed Feb 5 13:28:13 1997 Doug Evans <dje@canuck.cygnus.com>
1115 * configure.in: Don't configure any subdirs if no simulator
1116 is being built. Don't use erc32 for sparc64.
1117 * configure: Regenerated.
1119 Tue Feb 4 13:19:39 1997 Doug Evans <dje@canuck.cygnus.com>
1121 * Makefile.in (autoconf-common): New target.
1122 * configure.in: Do configure common.
1123 * configure: Regenerated.
1125 Thu Jan 23 13:59:52 1997 Stu Grossman (grossman@critters.cygnus.com)
1127 * configure configure.in: Don't configure common anymore. Files
1128 from common are now built in the individual simualtor directories.
1129 This fixes problems with the WinGDB build procedure.
1131 Mon Jan 13 13:16:42 1997 Jeffrey A Law (law@cygnus.com)
1133 * configure: Enable the mn10200 simulator.
1135 Wed Nov 20 01:00:36 1996 Doug Evans <dje@canuck.cygnus.com>
1137 * configure.in (configdirs): Add common.
1138 * configure: Regenerated.
1140 Fri Nov 1 08:03:30 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1142 * configure.in (powerpc*-*-linux*): Treat like the other powerpc
1143 system V based targets.
1144 * configure: Regenerate.
1146 Thu Oct 17 12:50:08 1996 Doug Evans <dje@canuck.cygnus.com>
1148 * configure.in (--enable-sim-powerpc): Delete.
1149 (--enable-sim): Add.
1150 * configure: Regenerated.
1152 Fri Oct 11 21:13:43 1996 Jeffrey A Law (law@cygnus.com)
1154 * configure.in: Only build the V850 simulator if
1156 * configure: Rebuild.
1158 Sun Sep 8 17:22:50 1996 Ian Lance Taylor <ian@cygnus.com>
1160 * configure.in: Do build erc32 for DOS and Windows hosts.
1161 * configure: Rebuild.
1163 Wed Sep 4 18:11:27 1996 Stu Grossman (grossman@critters.cygnus.com)
1165 * Makefile.in erc32/Makefile.in: Don't set srcroot. This should
1166 be inherited from the parent. Remove INSTALL_XFORM and
1167 INSTALL_XFORM1. Make INSTALL be set from configure.
1169 Wed Sep 4 15:49:16 1996 Ian Lance Taylor <ian@cygnus.com>
1171 * configure.in: Only build the MIPS simulator if we are using
1173 * configure: Rebuild.
1175 Wed Aug 28 19:05:23 1996 Jeffrey A Law (law@cygnus.com)
1177 * configure.in (v850-*-*): Added V850 simulator.
1179 Thu Aug 1 17:08:41 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1181 * configure.in (d10v-*-*): Added D10V simulator.
1183 Wed Jun 26 12:33:57 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
1185 * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir,
1186 INSTALL_PROGRAM, INSTALL_DATA): Use autoconf-set values.
1188 * configure.in (AC_PREREQ): autoconf 2.5 or higher.
1189 (AC_PROG_INSTALL): Added.
1190 * configure: Rebuilt.
1192 Mon Jun 24 14:18:26 1996 Ian Lance Taylor <ian@cygnus.com>
1194 * configure.in: Only configure erc32 if using gcc.
1195 * configure: Rebuild.
1197 Tue Jun 4 09:24:21 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1199 * configure.in (sim_target): Build PowerPC simulator for powerpc
1200 System V.4, Solaris, and Elf targets.
1201 * configure: Regenerate with autoconf 2.10.
1203 Wed May 22 12:10:49 1996 Rob Savoye <rob@chinadoll>
1205 * configure.in: Only built erc32 simulator on Unix hosts as it
1207 * configure: Regenerated with autoconf 2.8.
1209 Sun May 19 20:20:40 1996 Rob Savoye <rob@chinadoll.cygnus.com>
1211 * erc32: Sparc simulator from the ESA.
1213 Sun Apr 7 21:00:09 1996 Fred Fish <fnf@cygnus.com>
1215 From: Miles Bader <miles@gnu.ai.mit.edu>
1216 * configure.in: Use AC_CHECK_TOOL to find AR & RANLIB.
1217 * configure: Regenerate using autoconf.
1219 Thu Feb 22 11:31:50 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1221 * Makefile.in (install): Fix typo.
1223 Wed Feb 21 11:59:57 1996 Ian Lance Taylor <ian@cygnus.com>
1225 * configure: Regenerate with autoconf 2.7.
1227 * Makefile.in (all): Simplify.
1228 (clean, mostlyclean): SUBDIRS may contain whitespace; fix the loop
1229 as in the all target.
1230 (distclean, maintainer-clean, realclean): Likewise.
1231 (install): Likewise.
1233 Thu Feb 15 18:37:00 1996 Fred Fish <fnf@cygnus.com>
1235 * Makefile.in (all): Remove extra '\' char from shell script.
1237 Wed Feb 14 16:43:59 1996 Mike Meissner <meissner@tiktok.cygnus.com>
1239 * Makefile.in (all): Avoid a for loop with zero elements, even if
1240 the loop will not be executed because of an if statement.
1242 Wed Jan 31 21:48:34 1996 Fred Fish <fnf@cygnus.com>
1244 * Makefile.in (install): Add missing semicolon in "fi \".
1246 Thu Nov 9 16:10:56 1995 Michael Meissner <meissner@tiktok.cygnus.com>
1248 * Makefile.in (AR, CC, CFLAGS, CC_FOR_BUILD, RANLIB): Pick up
1249 defaults from configure.
1251 * configure.in: Pick up AR, CC, CFLAGS, CC_FOR_BUILD, RANLIB using
1253 (powerpc*-*-eabi*): Build simulator for all powerpc eabi targets
1254 if either --enable-sim-powerpc is used, or the host compiler is
1257 Wed Nov 8 15:46:49 1995 James G. Smith <jsmith@pasanda.cygnus.co.uk>
1259 * configure.in (mips*-*-*): Added "mips" simulator target.
1260 * configure: Re-generated.
1262 Tue Oct 10 11:08:20 1995 Fred Fish <fnf@cygnus.com>
1264 * Makefile.in (BISON): Remove macro.
1265 (FLAGS_TO_PASS): Remove BISON.
1267 Sun Oct 8 04:26:27 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1269 * configure.in: Explicitly `exit 0' for broken shells.
1270 * configure: Rebuilt.
1272 Fri Oct 6 12:03:27 1995 Jim Wilson <wilson@chestnut.cygnus.com>
1274 * common/run.c (main): Initialize the callbacks.
1276 Wed Sep 20 13:34:50 1995 Ian Lance Taylor <ian@cygnus.com>
1278 * Makefile.in (maintainer-clean): New synonym for realclean.
1280 Fri Aug 25 11:53:43 1995 Michael Meissner <meissner@tiktok.cygnus.com>
1282 * configure.in (powerpc*-*-eabisim*): Only build the simulator if
1283 the target is powerpc*-*-eabisim*, since it requires GCC to build.
1285 Mon Aug 21 17:53:48 1995 Michael Meissner <meissner@tiktok.cygnus.com>
1287 * configure.in (powerpc{,le}-*-*): Add psim from Andrew Cagney
1288 <cagney@highland.com.au>.
1289 * configure: Regnerate from configure.in.
1291 Thu Aug 3 10:45:37 1995 Fred Fish <fnf@cygnus.com>
1293 * Update all FSF addresses except those in COPYING* files.
1295 Thu Jul 20 15:17:29 1995 Fred Fish <fnf@cygnus.com>
1297 * Makefile.in (CC_FOR_BUILD): Define default and arrange to pass
1298 submakes either default or passed in value.
1300 Wed Jul 5 14:32:54 1995 J.T. Conklin <jtc@rtl.cygnus.com>
1302 * Makefile.in (all, clean, distclean, mostlyclean, realclean,
1303 install): Changed targets so that they descend all
1304 subdirectories in $(SUBDIRS).
1305 (*-all, *-clean, *-install): Removed targets.
1307 * configure.in: Don't bother with target makefile fragments, they
1308 are no longer needed.
1309 * configure: regenerated.
1311 * Makefile.in, configure.in: converted to autoconf.
1312 * configure: New file, generated with autconf 2.4.
1314 Wed May 24 14:48:46 1995 Steve Chamberlain <sac@slash.cygnus.com>
1316 * Makefile.in: Support ARM.
1317 * configure.in: Ditto.
1319 Sun Jan 15 16:53:47 1995 Steve Chamberlain <sac@splat>
1321 * Makefile.in: Support W65.
1322 * configure.in: Ditto.
1324 Sun Mar 13 09:27:50 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
1326 * Makefile.in: Add TAGS target.
1328 Mon Sep 13 12:47:15 1993 K. Richard Pixley (rich@sendai.cygnus.com)
1330 * Makefile.in (all-z8k, install-z8k, clean-z8k, all-h8300,
1331 install-h8300, clean-h8300, all-h8500, install-h8500,
1332 clean-h8500, all-sh, install-sh, clean-sh): do not echo
1335 Wed Jun 30 14:12:05 1993 david d `zoo' zuhn (zoo at poseidon.cygnus.com)
1337 * Makefile.in: remove endian.h trace from h8500
1339 Sun Jun 13 13:08:58 1993 Jim Kingdon (kingdon@cygnus.com)
1341 * Makefile.in: Add distclean, realclean, and mostlyclean targets.
1343 Fri May 21 11:21:16 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
1345 * Makefile.in: make all of the all-* target (except all-nothing)
1346 depend on endian.h, so that if we're not building a simulator, we
1349 Fri May 21 10:55:06 1993 Ian Lance Taylor (ian@cygnus.com)
1351 * Makefile.in (check, installcheck): Added dummy targets.
1353 Mon May 3 21:39:43 1993 Fred Fish (fnf@cygnus.com)
1355 * Makefile.in (endian): Find endian.c in $(srcdir), and also
1356 explicitly make it, since some makes apparently don't work with
1357 VPATH and .c to executable rules (SunOS make for example).
1359 Mon May 3 08:29:01 1993 Steve Chamberlain (sac@thepub.cygnus.com)
1361 * Makefile.in (endian): Add explicit rule for broken makes.
1363 Mon Mar 15 15:47:53 1993 Ian Lance Taylor (ian@cygnus.com)
1365 * Makefile.in (info, install-info): New targets.
1366 (DO_INSTALL): Renamed from INSTALL, which is overridden by the top
1369 Wed Feb 10 20:12:27 1993 K. Richard Pixley (rich@ok.cygnus.com)
1371 * Makefile.in (endian.h): build endian.h via a temporary file so
1372 that we don't leave an incomplete file lying around on
1374 (clean): remove endian, e.h, and endian.h.
1376 Mon Feb 8 11:46:06 1993 Steve Chamberlain (sac@thepub.cygnus.com)
1378 * Makefile.in, configure.in: if target isn't supported, build a