1 2006-03-13 DJ Delorie <dj@redhat.com>
3 * MAINTAINERS: Add self as m32c sim maintainer.
5 2006-02-23 Hans-Peter Nilsson <hp@axis.com>
7 * cris/traps.c (syscall_map): Remove CB_SYS_time / TARGET_SYS_time
9 (cris_break_13_handler) <case TARGET_SYS_time>: New case.
11 2006-01-23 Jim Blandy <jimb@redhat.com>
13 Add simulator for Renesas M32C and M16C.
15 * m32c: New directory.
16 * configure.ac: Add entry for Renesas M32C.
17 * configure: Regenerate.
19 2006-01-10 Hans-Peter Nilsson <hp@axis.com>
21 * cris/cris-tmpl.c (MY (f_model_insn_before)): Only display basic
22 cycle count for the current insn.
24 2005-12-06 Hans-Peter Nilsson <hp@axis.com>
26 * cris/cpuv10.h, cris/cpuv32.h, cris/cris-desc.c, cris/cris-opc.h,
27 cris/decodev10.c, cris/decodev10.h, cris/decodev32.c,
28 cris/decodev32.h, cris/modelv10.c, cris/modelv32.c,
29 cris/semcrisv10f-switch.c, cris/semcrisv32f-switch.c: Regenerate.
31 2005-12-05 Hans-Peter Nilsson <hp@axis.com>
33 * cris/arch.c, cris/arch.h, cris/cpuall.h, cris/cpuv10.c,
34 cris/cpuv10.h, cris/cpuv32.c, cris/cpuv32.h, cris/cris-desc.c,
35 cris/cris-desc.h, cris/cris-opc.h, cris/decodev10.c,
36 cris/decodev10.h, cris/decodev32.c, cris/decodev32.h,
37 cris/modelv10.c, cris/modelv32.c, cris/semcrisv10f-switch.c,
38 cris/semcrisv32f-switch.c: Regenerate.
40 2005-11-20 Hans-Peter Nilsson <hp@axis.com>
42 * cris/traps.c (TARGET_O_RDONLY, TARGET_O_WRONLY): Define.
43 (open_map): Use TARGET_O_ACCMODE, TARGET_O_RDONLY and
45 (cris_break_13_handler) <case TARGET_SYS_fcntl>: Add support for
46 F_GETFL on fd 0, 1 and 2.
48 2005-11-17 Hans-Peter Nilsson <hp@axis.com>
50 * cris/sim-main.h (struct _sim_cpu): New members last_syscall,
51 last_open_fd, last_open_flags.
52 * cris/traps.c: Don't include targ-vals.h.
53 (TARGET_O_ACCMODE): Define.
54 (cris_break_13_handler): Set new _sim_cpu members.
55 <case TARGET_SYS_fcntl>: Support special case of F_GETFL.
56 Rearrange code as switch. Emit "unimplemented" abort for
57 unimplemented fcntl calls.
59 * cris/traps.c (TARGET_SYS_stat): Define.
60 (syscall_stat32_map): Add entry for TARGET_SYS_stat.
61 (cris_break_13_handler) <case TARGET_SYS_stat>: New case.
63 2005-11-16 Hans-Peter Nilsson <hp@axis.com>
65 * cris/cris-tmpl.c (MY (f_model_insn_before)): Make sure only the
66 low 32 bits are used after an unsigned long cast.
68 2005-05-28 Hans-Peter Nilsson <hp@axis.com>
70 * cris/Makefile.in (stamp-v32fmloop): Depend on stamp-v10fmloop.
72 2005-05-26 Chris Demetriou <cgd@netbsd.org>
74 * MAINTAINERS: Update my mail address, move myself to the
75 "Past maintainers" section.
77 2005-05-17 Corinna Vinschen <vinschen@redhat.com>
79 * configure.ac: Add igen to v850 build.
80 * configure: Regenerate.
82 2005-04-29 Paul Brook <paul@codesourcery.com>
84 * common/callback.c (PIPE_BUF): Provide default definition.
85 (os_lstat): Use stat if lstat is not available on the host.
86 (os_ftruncate): Return EINVAL if not available on the host.
88 * common/configure.ac: Check for lstat, truncate and ftruncate.
89 * common/configure: Regenerate.
90 * common/config.in: Regenerate.
92 2005-04-27 Paul Brook <paul@codesourcery.com>
94 * common/Make-common.in: Add $(EXEEXT) to "run".
96 2005-04-18 Hans-Peter Nilsson <hp@axis.com>
98 * cris/traps.c (cris_break_13_handler) <case TARGET_SYS_mmap2>:
99 For ((len & 8191) != 0 && fd == (USI) -1), don't say this isn't
100 implemented. In call to create_map, pad length argument to 8k.
102 2005-04-15 Corinna Vinschen <vinschen@redhat.com>
104 * configure.ac: Add explicit sh64 case.
105 * configure: Regenerate.
107 2005-03-30 Paul Brook <paul@codesourcery.com>
109 * arm/wrapper.c: Provide SIGTRAP and SIGBUS.
111 2005-03-24 Hans-Peter Nilsson <hp@axis.com>
113 * cris/Makefile.in (stamp-v10fcpu, stamp-v32fcpu): Add kludge to
114 include cgen-ops.h in decodev10.c and decodev32.c.
115 * cris/sim-main.h: Don't include cgen-ops.h here.
116 * cris/arch.c, cris/arch.h, cris/cpuall.h, cris/cpuv10.c,
117 cris/cpuv10.h, cris/cpuv32.c, cris/cpuv32.h, cris/cris-desc.c,
118 cris/cris-desc.h, cris/cris-opc.h, cris/decodev10.c,
119 cris/decodev10.h, cris/decodev32.c, cris/decodev32.h,
120 cris/modelv10.c, cris/modelv32.c, cris/semcrisv10f-switch.c,
121 cris/semcrisv32f-switch.c: Regenerate.
123 * cris/traps.c (cris_break_13_handler) <case
124 TARGET_SYS_rt_sigaction>: Rename sa_handler, sa_flags,
125 sa_restorer, sa_mask_low, sa_mask_high to target_sa_handler etc.
127 2005-03-23 Mark Kettenis <kettenis@gnu.org>
129 * cris/configure: Regenerate.
131 2005-02-28 Jim Blandy <jimb@redhat.com>
133 * d10v/configure.ac, igen/configure.ac, m68hc11/configure.ac,
134 mips/configure.ac, mn10300/configure.ac, v850/configure.ac:
135 Regenerated, after change to common/aclocal.m4.
137 2005-02-18 Corinna Vinschen <vinschen@redhat.com>
139 * iq2000: New target subdirectory.
140 * configure.ac: Add iq2000 target.
141 * configure: Regenerate.
143 2005-01-29 Hans-Peter Nilsson <hp@axis.com>
145 * Makefile.in (all, clean mostlyclean, distclean maintainer-clean)
146 (realclean, install): Fail if subdir make failed.
148 2005-01-28 Hans-Peter Nilsson <hp@axis.com>
150 * cris: New directory, simulator for Axis Communications CRIS
151 including CRIS v32, CGEN-based.
152 * configure.ac: Add corresponding configury.
153 * configure: Regenerate.
155 2005-01-17 Andrew Cagney <cagney@gnu.org>
157 * configure.ac: For mips*-*-* and mn10300*-*-* configure the
158 common directory. Remove sparc*-*-* from list.
160 2005-01-11 Andrew Cagney <cagney@gnu.org>
162 * Makefile.in (autoconf-common autoheader-common): Add --force to
163 autoconf and autoheader.
164 (autoconf-common autoheader-common)
165 (autoconf-install autoheader-install): Check for configure.ac, not
167 * configure.ac: Delete AC_CONFIG_AUX_DIR.
168 * configure: Re-generate.
170 2005-01-07 Andrew Cagney <cagney@gnu.org>
172 * configure.ac: Replace configure.in. Requires autoconf 2.59 and
173 correctly calls AC_CONFIG_SUBDIRS.
174 * configure: Re-generate.
176 2004-12-01 Andrew Cagney <cagney@gnu.org>
178 * i960, h8500: Delete directory.
180 2004-11-12 Andrew Cagney <cagney@gnu.org>
182 * d30v, fr30, mn10200, z8k: Delete directory.
184 2004-03-10 Ben Elliston <bje@gnu.org>
186 * MAINTAINERS: Update my mail address.
188 2004-01-26 Chris Demetriou <cgd@broadcom.com>
190 * configure.in (mips*-*-*): Configure in testsuite.
191 * configure: Regenerate.
193 2003-10-08 Dave Brolley <brolley@redhat.com>
195 * configure.in: Move frv handling to alphabetically correct placement.
197 2003-09-03 Andreas Schwab <schwab@suse.de>
199 * Makefile.in (FLAGS_TO_PASS): Pass down $(bindir) and $(mandir).
201 2003-08-29 Dave Brolley <brolley@redhat.com>
203 * MAINTAINERS: Add myself as maintainer of the FRV port.
205 2003-08-20 Michael Snyder <msnyder@redhat.com>
206 Dave Brolley <brolley@redhat.com>
208 * frv/: New directory, simulator for the Fujitsu FRV.
209 * configure.in: Add frv configury.
210 * configure: Regenerate.
212 2003-08-10 Ben Elliston <bje@wasabisystems.com>
214 * MAINTAINERS: Update my mail address.
216 2003-08-09 Andrew Cagney <cagney@redhat.com>
218 * MAINTAINERS: Andrew Cagney (mips) and Geoff Keating (ppc) drop
219 maintenance. List igen and sh maintainers. Mention that target
220 and global maintainers pick up the slack.
222 2003-07-09 Michael Snyder <msnyder@redhat.com>
224 * configure.in: Add testsuite to extra_subdirs for sh.
225 * configure: Regenerate.
227 2003-01-23 Nick Clifton <nickc@redhat.com>
231 2002-04-02 Alexandre Oliva <aoliva@redhat.com>
233 * sh/gencode.c: Replace sh3e with sh2e except in fsqrt.
235 2002-08-24 Geoffrey Keating <geoffk@redhat.com>
237 * MAINTAINERS: Update my email address.
239 2002-07-17 Andrew Cagney <ac131313@redhat.com>
241 * w65/: Delete directory.
243 2002-07-16 Andrew Cagney <ac131313@redhat.com>
245 * configure.in (extra_subdirs): Mark fr30-*-* as obsolete.
246 * configure: Re-generate.
248 2002-07-13 Andrew Cagney <ac131313@redhat.com>
250 * configure.in (extra_subdirs): Mark d30v-*-* as obsolete.
251 * configure: Re-generate.
253 2002-06-16 Andrew Cagney <ac131313@redhat.com>
255 * Makefile.in (autoconf-changelog autoheader-changelog): Let name,
256 id, date and host to be overriden by NAME, ID, DATE and HOST
257 respectfully. Use ISO dates.
259 Thu Jun 6 12:34:13 2002 Andrew Cagney <cagney@redhat.com>
261 * Makefile.in (ChangeLog): New makefile variable.
262 * README-HACKING: Mention the ChangeLog makefile variable.
264 2002-06-01 Andrew Cagney <ac131313@redhat.com>
266 * tic80/: Delete directory.
268 2002-05-16 Stephane Carrez <stcarrez@nerim.fr>
270 * MAINTAINERS: Update my email address.
272 2002-03-06 Stephane Carrez <Stephane.Carrez@worldnet.fr>
274 * MAINTAINERS: Record self as maintainer of m68hc11 simulator.
276 2002-03-01 Frank Ch. Eigler <fche@redhat.com>
278 * MAINTAINERS: Record self as a co-maintainer of just common/.
280 2002-02-07 Nick Clifton <nickc@cambridge.redhat.com>
282 * MAINTAINERS: Point to GDB files describing overall maintaince
283 and check-in procedures.
285 2002-01-10 Nick Clifton <nickc@cambridge.redhat.com>
287 * MAINTAINERS: Add myself for ARM portions.
289 2001-10-19 Andrew Cagney <ac131313@redhat.com>
291 * configure.in: When Linux or NetBSD, enable PowerPC simulator.
292 * configure: Re-generate.
294 2001-02-16 Ben Elliston <bje@redhat.com>
296 * MAINTAINERS: Add myself for common portions.
298 2001-01-15 Chris Demetriou <cgd@broadcom.com>
300 * MAINTAINERS: Added self and Andrew for the mips sim.
302 2000-10-25 Geoff Keating <geoffk@cygnus.com>
304 * MAINTAINERS: Added self and Andrew for the ppc sim.
306 Thu Jul 27 21:26:26 2000 Andrew Cagney <cagney@b1.cygnus.com>
308 From Stephane Carrez <Stephane.Carrez@worldnet.fr>:
309 * m68hc11: New directory.
311 * configure: Regenerate.
313 Tue Jul 4 13:43:54 2000 Andrew Cagney <cagney@b1.cygnus.com>
315 * tic80: New directory.
316 * configure.in: Add configury.
317 * configure: Regenerate.
319 2000-04-20 Nick Clifton <nickc@cygnus.com>
321 * configure.in (extra_subdirs): Add testsuite to strongarm
323 * configure: Regenerate.
325 Sat Mar 4 16:48:54 2000 Andrew Cagney <cagney@b1.cygnus.com>
327 * MAINTAINERS: New file. Blank.
329 1999-11-18 Ben Elliston <bje@cygnus.com>
331 * configure.in: Require autoconf 2.13 and remove obsolete
332 invocation of AC_C_CROSS.
333 * configure: Regenerate.
335 1999-09-29 Doug Evans <devans@casey.cygnus.com>
337 * configure.in: Configure the testsuite directory for thumb.
338 * configure: Regenerate.
340 1999-07-16 Ben Elliston <bje@cygnus.com>
342 * configure.in: Configure the testsuite directory for arm.
343 * configure: Regenerate.
345 1999-04-08 Nick Clifton <nickc@cygnus.com>
347 * configure.in: Add support for MCore target.
348 * configure: Regenerate.
350 1999-03-14 Stan Shebs <shebs@andros.cygnus.com>
352 * Makefile.in (FLAGS_TO_PASS, TARGET_FLAGS_TO_PASS): Remove
353 RUNTEST instead of commenting out, fixes portability problem.
355 1999-02-08 Nick Clifton <nickc@cygnus.com>
357 * configure.in: Add support for StrongARM target.
358 * configure: Regenerate.
360 1999-01-04 Jason Molenda (jsm@bugshack.cygnus.com)
362 * configure.in: Require autoconf 2.12.1 or higher.
364 1998-12-08 James E Wilson <wilson@wilson-pc.cygnus.com>
366 * configure.in (i960-*-*): Add.
367 * configure: Rebuild.
369 Wed Nov 4 19:11:43 1998 Dave Brolley <brolley@cygnus.com>
371 * configure.in: Added case for fr30-*-*.
372 * configure: Regenerated.
374 Fri Sep 25 10:12:19 1998 Christopher Faylor <cgf@cygnus.com>
376 * ppc/Makefile.in: Add EXEEXT to installed powerpc-eabi-run program
377 to allow successful operation on Windows.
379 Thu May 28 14:59:46 1998 Jillian Ye <jillian@cygnus.com>
381 * Makefile.in: Take RUNTEST out of FLAGS_TO_PASS so that make
382 check can be invoked recursively.
384 Wed Apr 29 12:38:53 1998 Mark Alexander <marka@cygnus.com>
386 * configure.in: Build simulator on sparclite and sparc86x targets.
387 * configure: Regenerate.
389 Sun Apr 26 15:21:01 1998 Tom Tromey <tromey@cygnus.com>
391 * Makefile.in (autoconf-common autoheader-common): Don't pass -l
392 to autoconf and autoheader.
394 Fri Apr 24 11:14:13 1998 Tom Tromey <tromey@cygnus.com>
396 * Makefile.in (autoconf-common autoheader-common): Pass `-l
397 ../common' to autoconf and autoheader. Unconditionally run
398 autoconf in every subdir.
399 (autoconf-changelog autoheader-changelog): Unconditionally run
400 commands in every subdir.
401 (autoconf-install autoheader-install): Likewise.
403 Tue Mar 24 17:12:43 1998 Stu Grossman <grossman@bhuna.cygnus.co.uk>
405 * Makefile.in: Get SHELL from configure.
406 * (FLAGS_TO_PASS): Pass down SHELL.
407 * configure: Regenerate with autoconf 2.12.1 to fix shell issues for
410 Tue Mar 24 11::18:00 1998 Joyce Janczyn <janczyn@cygnus.com>
412 * configure.in (extra_subdirs): Enable igen for mn10300.
413 * configure: Re-generate.
415 Tue Dec 2 10:10:42 1997 Nick Clifton <nickc@cygnus.com>
417 * configure.in (extra_subdirs): Add support for thumb target.
419 * configure (extra_subdirs): Add support for thumb target.
421 Wed Oct 8 12:38:48 1997 Andrew Cagney <cagney@b1.cygnus.com>
423 * configure.in (extra_subdirs): Add IGEN directory when MIPS
425 * configure: Regenerate.
427 Fri Sep 12 13:10:31 1997 Andrew Cagney <cagney@b1.cygnus.com>
429 * configure.in (extra_subdirs): v850ea needs igen.
430 * configure: Re-generate.
432 Mon Sep 1 16:48:23 1997 Andrew Cagney <cagney@b1.cygnus.com>
434 * configure.in (testdir): When a testsuite directory, add that to
435 the list of confdirs.
437 Tue Aug 19 11:17:46 1997 Andrew Cagney <cagney@b1.cygnus.com>
439 * configure.in (extra_subdirs): Enable igen ready for V850.
441 Tue Aug 26 15:14:48 1997 Andrew Cagney <cagney@b1.cygnus.com>
443 * configure.in (w65-*-*, only_if_enabled): Set.
444 * configure: Re-generate.
446 Mon Aug 25 16:26:53 1997 Andrew Cagney <cagney@b1.cygnus.com>
448 * configure.in (sparc*-*-*, only_if_enabled): Set
449 only_if_enabled=yes. Check only_if_enabled before enabling a
451 * configure: Regenerate.
453 Mon Aug 18 10:56:59 1997 Nick Clifton <nickc@cygnus.com>
455 * configure.in (extra_subdirs): Add v850e target.
457 Mon Aug 18 10:56:59 1997 Nick Clifton <nickc@cygnus.com>
459 * configure.in (extra_subdirs): Add v850ea target.
461 Fri Jul 25 11:40:47 1997 Doug Evans <dje@canuck.cygnus.com>
463 * configure.in (sparc*-*-*): Don't build erc32.
464 * configure: Regenerate.
466 Thu Apr 24 00:47:20 1997 Doug Evans <dje@canuck.cygnus.com>
468 * configure.in (m32r-*-*): New target.
469 * configure: Regenerate.
471 * Makefile.in (autoconf-common, autoconf-changelog): Change $* to $@.
473 Mon Apr 21 22:57:55 1997 Andrew Cagney <cagney@b1.cygnus.com>
475 * Makefile.in (.NOEXPORT, MAKEOVERRIDES): Moved to end, BSD make
476 thought that .NOEXPORT was the default target.
478 Fri Apr 11 17:18:07 1997 Ian Lance Taylor <ian@cygnus.com>
480 * Makefile.in (clean mostlyclean): Restore targets accidentally
481 deleted in earlier change.
483 Thu Apr 3 12:20:32 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
485 * Makefile.in (autoheader-common, autoheader-changelog,
486 autoheader-install): Perform autoheader in addition to autoconf.
488 Wed Apr 2 15:09:05 1997 Doug Evans <dje@canuck.cygnus.com>
490 * Makefile.in (autoconf-install): New target.
491 (autoconf-changelog): Try different way to obtain user name.
493 Wed Apr 2 14:25:52 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
495 * Makefile.in (autoconf-changelog): New target, update
496 ChangeLog for all subdirectories - normally used after
497 autoconf-common target.
499 Wed Mar 19 14:26:21 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
501 * configure.in (extra_subdirs): Include testsuite for d30v.
502 * configure: Regenerate.
504 * Makefile.in (RUNTEST, RUNTESTFLAGS): Borrow test rules from
506 (check): New rules - drive the testsuite.
508 Mon Mar 3 13:01:00 1997 Jeffrey A Law (law@cygnus.com)
510 * configure.in: Add mn10200 configure lines accidentally
512 * configure: Regenerated.
514 Wed Feb 19 10:34:20 1997 Andrew Cagney <cagney@critters.cygnus.com>
516 * configure.in (extra_subdirs): Generalize common sub directory
518 (extra_subdirs): For d30v add igen to the list to be built.
520 Sun Feb 16 16:37:47 1997 Andrew Cagney <cagney@critters.cygnus.com>
522 * configure.in (d30v): New target.
523 * configure: Regenerated.
525 Wed Feb 19 23:17:13 1997 Jeffrey A Law (law@cygnus.com)
527 * configure.in: Don't require GCC to build the mn10200
529 * configure: Rebuilt.
531 Wed Feb 5 13:28:13 1997 Doug Evans <dje@canuck.cygnus.com>
533 * configure.in: Don't configure any subdirs if no simulator
534 is being built. Don't use erc32 for sparc64.
535 * configure: Regenerated.
537 Tue Feb 4 13:19:39 1997 Doug Evans <dje@canuck.cygnus.com>
539 * Makefile.in (autoconf-common): New target.
540 * configure.in: Do configure common.
541 * configure: Regenerated.
543 Thu Jan 23 13:59:52 1997 Stu Grossman (grossman@critters.cygnus.com)
545 * configure configure.in: Don't configure common anymore. Files
546 from common are now built in the individual simualtor directories.
547 This fixes problems with the WinGDB build procedure.
549 Mon Jan 13 13:16:42 1997 Jeffrey A Law (law@cygnus.com)
551 * configure: Enable the mn10200 simulator.
553 Wed Nov 20 01:00:36 1996 Doug Evans <dje@canuck.cygnus.com>
555 * configure.in (configdirs): Add common.
556 * configure: Regenerated.
558 Fri Nov 1 08:03:30 1996 Michael Meissner <meissner@tiktok.cygnus.com>
560 * configure.in (powerpc*-*-linux*): Treat like the other powerpc
561 system V based targets.
562 * configure: Regenerate.
564 Thu Oct 17 12:50:08 1996 Doug Evans <dje@canuck.cygnus.com>
566 * configure.in (--enable-sim-powerpc): Delete.
568 * configure: Regenerated.
570 Fri Oct 11 21:13:43 1996 Jeffrey A Law (law@cygnus.com)
572 * configure.in: Only build the V850 simulator if
574 * configure: Rebuild.
576 Sun Sep 8 17:22:50 1996 Ian Lance Taylor <ian@cygnus.com>
578 * configure.in: Do build erc32 for DOS and Windows hosts.
579 * configure: Rebuild.
581 Wed Sep 4 18:11:27 1996 Stu Grossman (grossman@critters.cygnus.com)
583 * Makefile.in erc32/Makefile.in: Don't set srcroot. This should
584 be inherited from the parent. Remove INSTALL_XFORM and
585 INSTALL_XFORM1. Make INSTALL be set from configure.
587 Wed Sep 4 15:49:16 1996 Ian Lance Taylor <ian@cygnus.com>
589 * configure.in: Only build the MIPS simulator if we are using
591 * configure: Rebuild.
593 Wed Aug 28 19:05:23 1996 Jeffrey A Law (law@cygnus.com)
595 * configure.in (v850-*-*): Added V850 simulator.
597 Thu Aug 1 17:08:41 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
599 * configure.in (d10v-*-*): Added D10V simulator.
601 Wed Jun 26 12:33:57 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
603 * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir,
604 INSTALL_PROGRAM, INSTALL_DATA): Use autoconf-set values.
606 * configure.in (AC_PREREQ): autoconf 2.5 or higher.
607 (AC_PROG_INSTALL): Added.
608 * configure: Rebuilt.
610 Mon Jun 24 14:18:26 1996 Ian Lance Taylor <ian@cygnus.com>
612 * configure.in: Only configure erc32 if using gcc.
613 * configure: Rebuild.
615 Tue Jun 4 09:24:21 1996 Michael Meissner <meissner@tiktok.cygnus.com>
617 * configure.in (sim_target): Build PowerPC simulator for powerpc
618 System V.4, Solaris, and Elf targets.
619 * configure: Regenerate with autoconf 2.10.
621 Wed May 22 12:10:49 1996 Rob Savoye <rob@chinadoll>
623 * configure.in: Only built erc32 simulator on Unix hosts as it
625 * configure: Regenerated with autoconf 2.8.
627 Sun May 19 20:20:40 1996 Rob Savoye <rob@chinadoll.cygnus.com>
629 * erc32: Sparc simulator from the ESA.
631 Sun Apr 7 21:00:09 1996 Fred Fish <fnf@cygnus.com>
633 From: Miles Bader <miles@gnu.ai.mit.edu>
634 * configure.in: Use AC_CHECK_TOOL to find AR & RANLIB.
635 * configure: Regenerate using autoconf.
637 Thu Feb 22 11:31:50 1996 Michael Meissner <meissner@tiktok.cygnus.com>
639 * Makefile.in (install): Fix typo.
641 Wed Feb 21 11:59:57 1996 Ian Lance Taylor <ian@cygnus.com>
643 * configure: Regenerate with autoconf 2.7.
645 * Makefile.in (all): Simplify.
646 (clean, mostlyclean): SUBDIRS may contain whitespace; fix the loop
647 as in the all target.
648 (distclean, maintainer-clean, realclean): Likewise.
651 Thu Feb 15 18:37:00 1996 Fred Fish <fnf@cygnus.com>
653 * Makefile.in (all): Remove extra '\' char from shell script.
655 Wed Feb 14 16:43:59 1996 Mike Meissner <meissner@tiktok.cygnus.com>
657 * Makefile.in (all): Avoid a for loop with zero elements, even if
658 the loop will not be executed because of an if statement.
660 Wed Jan 31 21:48:34 1996 Fred Fish <fnf@cygnus.com>
662 * Makefile.in (install): Add missing semicolon in "fi \".
664 Thu Nov 9 16:10:56 1995 Michael Meissner <meissner@tiktok.cygnus.com>
666 * Makefile.in (AR, CC, CFLAGS, CC_FOR_BUILD, RANLIB): Pick up
667 defaults from configure.
669 * configure.in: Pick up AR, CC, CFLAGS, CC_FOR_BUILD, RANLIB using
671 (powerpc*-*-eabi*): Build simulator for all powerpc eabi targets
672 if either --enable-sim-powerpc is used, or the host compiler is
675 Wed Nov 8 15:46:49 1995 James G. Smith <jsmith@pasanda.cygnus.co.uk>
677 * configure.in (mips*-*-*): Added "mips" simulator target.
678 * configure: Re-generated.
680 Tue Oct 10 11:08:20 1995 Fred Fish <fnf@cygnus.com>
682 * Makefile.in (BISON): Remove macro.
683 (FLAGS_TO_PASS): Remove BISON.
685 Sun Oct 8 04:26:27 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
687 * configure.in: Explicitly `exit 0' for broken shells.
688 * configure: Rebuilt.
690 Fri Oct 6 12:03:27 1995 Jim Wilson <wilson@chestnut.cygnus.com>
692 * common/run.c (main): Initialize the callbacks.
694 Wed Sep 20 13:34:50 1995 Ian Lance Taylor <ian@cygnus.com>
696 * Makefile.in (maintainer-clean): New synonym for realclean.
698 Fri Aug 25 11:53:43 1995 Michael Meissner <meissner@tiktok.cygnus.com>
700 * configure.in (powerpc*-*-eabisim*): Only build the simulator if
701 the target is powerpc*-*-eabisim*, since it requires GCC to build.
703 Mon Aug 21 17:53:48 1995 Michael Meissner <meissner@tiktok.cygnus.com>
705 * configure.in (powerpc{,le}-*-*): Add psim from Andrew Cagney
706 <cagney@highland.com.au>.
707 * configure: Regnerate from configure.in.
709 Thu Aug 3 10:45:37 1995 Fred Fish <fnf@cygnus.com>
711 * Update all FSF addresses except those in COPYING* files.
713 Thu Jul 20 15:17:29 1995 Fred Fish <fnf@cygnus.com>
715 * Makefile.in (CC_FOR_BUILD): Define default and arrange to pass
716 submakes either default or passed in value.
718 Wed Jul 5 14:32:54 1995 J.T. Conklin <jtc@rtl.cygnus.com>
720 * Makefile.in (all, clean, distclean, mostlyclean, realclean,
721 install): Changed targets so that they descend all
722 subdirectories in $(SUBDIRS).
723 (*-all, *-clean, *-install): Removed targets.
725 * configure.in: Don't bother with target makefile fragments, they
726 are no longer needed.
727 * configure: regenerated.
729 * Makefile.in, configure.in: converted to autoconf.
730 * configure: New file, generated with autconf 2.4.
732 Wed May 24 14:48:46 1995 Steve Chamberlain <sac@slash.cygnus.com>
734 * Makefile.in: Support ARM.
735 * configure.in: Ditto.
737 Sun Jan 15 16:53:47 1995 Steve Chamberlain <sac@splat>
739 * Makefile.in: Support W65.
740 * configure.in: Ditto.
742 Sun Mar 13 09:27:50 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
744 * Makefile.in: Add TAGS target.
746 Mon Sep 13 12:47:15 1993 K. Richard Pixley (rich@sendai.cygnus.com)
748 * Makefile.in (all-z8k, install-z8k, clean-z8k, all-h8300,
749 install-h8300, clean-h8300, all-h8500, install-h8500,
750 clean-h8500, all-sh, install-sh, clean-sh): do not echo
753 Wed Jun 30 14:12:05 1993 david d `zoo' zuhn (zoo at poseidon.cygnus.com)
755 * Makefile.in: remove endian.h trace from h8500
757 Sun Jun 13 13:08:58 1993 Jim Kingdon (kingdon@cygnus.com)
759 * Makefile.in: Add distclean, realclean, and mostlyclean targets.
761 Fri May 21 11:21:16 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
763 * Makefile.in: make all of the all-* target (except all-nothing)
764 depend on endian.h, so that if we're not building a simulator, we
767 Fri May 21 10:55:06 1993 Ian Lance Taylor (ian@cygnus.com)
769 * Makefile.in (check, installcheck): Added dummy targets.
771 Mon May 3 21:39:43 1993 Fred Fish (fnf@cygnus.com)
773 * Makefile.in (endian): Find endian.c in $(srcdir), and also
774 explicitly make it, since some makes apparently don't work with
775 VPATH and .c to executable rules (SunOS make for example).
777 Mon May 3 08:29:01 1993 Steve Chamberlain (sac@thepub.cygnus.com)
779 * Makefile.in (endian): Add explicit rule for broken makes.
781 Mon Mar 15 15:47:53 1993 Ian Lance Taylor (ian@cygnus.com)
783 * Makefile.in (info, install-info): New targets.
784 (DO_INSTALL): Renamed from INSTALL, which is overridden by the top
787 Wed Feb 10 20:12:27 1993 K. Richard Pixley (rich@ok.cygnus.com)
789 * Makefile.in (endian.h): build endian.h via a temporary file so
790 that we don't leave an incomplete file lying around on
792 (clean): remove endian, e.h, and endian.h.
794 Mon Feb 8 11:46:06 1993 Steve Chamberlain (sac@thepub.cygnus.com)
796 * Makefile.in, configure.in: if target isn't supported, build a