1 2013-01-01 Joel Brobecker <brobecker@adacore.com>
3 Update year range in copyright notice of all files.
5 2012-12-19 Joel Brobecker <brobecker@adacore.com>
7 Update old contact info in GPL license notices.
9 2012-12-19 Joel Brobecker <brobecker@adacore.com>
11 Update the non-FSF-copyrighted files in sim to GPLv3 or later.
13 2012-11-20 Pavel Chupin <pavel.v.chupin@intel.com>
15 * common/Make-common.in: Use lt_cv_dlopen_libs under PLUGINS
17 * common/acinclude.m4: Define lt_cv_dlopen_libs.
18 * arm/configure: Regenerate.
19 * avr/configure: Regenerate.
20 * bfin/configure: Regenerate.
21 * common/configure: Regenerate.
22 * cr16/configure: Regenerate.
23 * cris/configure: Regenerate.
24 * d10v/configure: Regenerate.
25 * erc32/configure: Regenerate.
26 * frv/configure: Regenerate.
27 * h8300/configure: Regenerate.
28 * igen/configure: Regenerate.
29 * iq2000/configure: Regenerate.
30 * lm32/configure: Regenerate.
31 * m32c/configure: Regenerate.
32 * m32r/configure: Regenerate.
33 * m68hc11/configure: Regenerate.
34 * mcore/configure: Regenerate.
35 * microblaze/configure: Regenerate.
36 * mips/configure: Regenerate.
37 * mn10300/configure: Regenerate.
38 * moxie/configure: Regenerate.
39 * ppc/configure: Regenerate.
40 * rl78/configure: Regenerate.
41 * rx/configure: Regenerate.
42 * sh/configure: Regenerate.
43 * sh64/configure: Regenerate.
44 * testsuite/configure: Regenerate.
45 * v850/configure: Regenerate.
47 2012-11-05 Stephane Carrez <Stephane.Carrez@gmail.com>
49 * MAINTAINERS: Update my email address.
51 2012-09-24 Steve Ellcey <sellcey@mips.com>
53 * mips/basic.exp: Add mips*-mti-elf* target.
54 * configure.ac: Add mips*-mti-elf* target.
55 * configure: Regenerate.
57 2012-06-15 Joel Brobecker <brobecker@adacore.com>
59 * configure: Regenerate.
61 2012-06-06 Michael Eager <eager@eagercon.com>
63 * microblaze/interp.c (config.h): Add #include.
65 2011-11-29 Joel Brobecker <brobecker@adacore.com>
67 * MAINTAINERS (Global Maintainers): New section. Add Mike
70 2011-11-28 DJ Delorie <dj@redhat.com>
72 * configure.tgt: Add rl78 support.
73 * configure: Regenerate.
74 * rl78: New directory.
75 * MAINTAINERS: Add myself as RL78 maintainer.
77 2011-07-08 Hans-Peter Nilsson <hp@axis.com>
79 * MAINTAINERS: Remove Thiemo Seufer.
81 2011-06-04 Mike Frysinger <vapier@gentoo.org>
83 * configure.tgt (bfin-*-*): Add sim_testsuite=yes.
84 * configure: Regenerate.
86 2011-05-04 Joseph Myers <joseph@codesourcery.com>
88 * configure.tgt (thumb*-*-* | strongarm*-*-* | xscale-*-*): Don't
90 * configure: Regenerate.
92 2011-03-05 Mike Frysinger <vapier@gentoo.org>
94 * MAINTAINERS: Add bfin entry.
95 * configure.tgt (bfin-*-*): Handle bfin targets.
96 * configure: Regenerate.
98 2011-01-05 Mike Frysinger <vapier@gentoo.org>
100 * .gitignore: Add /*/hw-config.h.
102 2010-12-23 Mike Frysinger <vapier@gentoo.org>
104 * .gitignore: New file.
106 2010-07-28 DJ Delorie <dj@redhat.com>
108 * MAINTAINERS: Add self as RX maintainer. Sort list.
110 2010-06-08 Nick Clifton <nickc@redhat.com>
112 * reg.c (set_oszc): Use unsigned int for the mask.
113 (set_szc, set_osz, set_sz): Likewise.
115 2010-04-26 Mike Frysinger <vapier@gentoo.org>
117 * configure.ac: Target logic moved out to and included from ...
118 * configure.tgt: ... this new file.
119 * configure: Regenerated.
121 2010-04-12 Mike Frysinger <vapier@gentoo.org>
123 * README-HACKING: Add more sections.
125 2010-02-11 Doug Evans <dje@sebabeach.org>
127 * cris/cpuv10.h, * cris/cpuv32.h, * cris/cris-desc.c,
128 * cris/cris-desc.h, * cris/decodev10.c, * cris/decodev32.c,
129 * cris/modelv10.c, * cris/modelv32.c, * cris/semcrisv10f-switch.c,
130 * cris/semcrisv32f-switch.c: Regenerate.
132 2010-01-09 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
134 * avr/configure: Regenerate.
135 * cris/configure: Regenerate.
136 * microblaze/configure: Regenerate.
138 2010-01-02 Doug Evans <dje@sebabeach.org>
140 * cris/arch.c, * cris/arch.h, * cris/cpuall.h, * cris/cpuv10.c,
141 * cris/cpuv10.h, * cris/cpuv32.c, * cris/cpuv32.h, * cris/cris-desc.c,
142 * cris/cris-desc.h, * cris/cris-opc.h, * cris/decodev10.c,
143 * cris/decodev10.h, * cris/decodev32.c, * cris/decodev32.h,
144 * cris/modelv10.c, * cris/modelv32.c, * cris/semcrisv10f-switch.c,
145 * cris/semcrisv32f-switch.c: Regenerate, update copyright year.
147 2010-01-01 Doug Evans <dje@sebabeach.org>
149 * cris/mloop.in: Fix copyright year update snafu.
151 2009-11-24 Joel Brobecker <brobecker@adacore.com>
153 * common/aclocal.m4: Add include of ../../config/zlib.m4.
154 * common/common.m4: Use AM_ZLIB to check for zlib support.
155 * ppc/configure.ac: Likewise.
156 * arm/configure, avr/configure, common/configure, cr16/configure,
157 cris/configure, d10v/configure, erc32/configure, frv/configure,
158 h8300/configure, iq2000/configure, lm32/configure, m32c/configure,
159 m32r/configure, m68hc11/configure, mcore/configure,
160 microblaze/configure, mips/configure, mn10300/configure,
161 moxie/configure, ppc/configure, sh/configure, sh64/configure,
162 v850/configure: Regenerate.
164 2009-11-24 DJ Delorie <dj@redhat.com>
167 * configure.ac: Add entry for Renesas RX.
168 * configure: Regenerate.
170 2009-11-22 Doug Evans <dje@sebabeach.org>
172 * cris/cpuall.h: Regenerate.
173 * cris/cpuv10.h: Regenerate.
174 * cris/cpuv32.h: Regenerate.
175 * cris/decodev10.c: Regenerate.
176 * cris/decodev10.h: Regenerate.
177 * cris/decodev32.c: Regenerate.
178 * cris/decodev32.h: Regenerate.
180 2009-11-12 Tristan Gingold <gingold@adacore.com>
182 * avr/interp.c (sim_write): Allow byte access.
185 2009-11-12 Tristan Gingold <gingold@adacore.com>
187 * avr/interp.c (sim_load): Clear memory before loading.
189 2009-11-09 Tristan Gingold <gingold@adacore.com>
191 * avr/interp.c (sim_resume): Fix typo for OP_ret.
193 2009-10-23 Doug Evans <dje@sebabeach.org>
195 * cris/arch.c: Regenerate.
196 * cris/arch.h: Regenerate.
197 * cris/cpuall.h: Regenerate.
198 * cris/cpuv10.c: Regenerate.
199 * cris/cpuv10.h: Regenerate.
200 * cris/cpuv32.c: Regenerate.
201 * cris/cpuv32.h: Regenerate.
202 * cris/cris-desc.c: Regenerate.
203 * cris/cris-desc.h: Regenerate.
204 * cris/cris-opc.h: Regenerate.
205 * cris/decodev10.c: Regenerate.
206 * cris/decodev10.h: Regenerate.
207 * cris/decodev32.c: Regenerate.
208 * cris/decodev32.h: Regenerate.
209 * cris/modelv10.c: Regenerate.
210 * cris/modelv32.c: Regenerate.
211 * cris/semcrisv10f-switch.c: Regenerate.
212 * cris/semcrisv32f-switch.c: Regenerate.
214 2009-10-22 Tristan Gingold <gingold@adacore.com>
216 * avr/interp.c (sim_stop): Return 1.
218 2009-10-16 Doug Evans <dje@sebabeach.org>
220 * MAINTAINERS: Add myself as m32r maintainer.
222 2009-10-15 Michael Egaer <eager@eagercon.com>
224 * MAINTAINERS: Add self as MicroBlaze maintainer.
226 2009-10-14 Ben Elliston <bje@gnu.org>
228 * MAINTAINERS (common): Move myself to "past maintainers" section.
230 2009-10-06 Michael Eager <eager@eagercon.com>
232 * microblaze/interp.c: Add include microblaze-dis.h.
234 2009-09-23 Michael Eager <eager@eagercon.com>
236 * configure: Add microblaze-*.* (not regenerated).
237 * configure.ac: Likewise.
238 * microblaze/config.in: New.
239 * microblaze/configure: Generate.
240 * microblaze/configure.ac: New.
241 * microblaze/interp.c: New.
242 * microblaze/Makefile.in: New.
243 * microblaze/microblaze.h: New.
244 * microblaze/microblaze.isa: New.
245 * microblaze/sim-main.h: New.
246 * microblaze/sysdep.h: New.
248 2009-08-22 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
250 * avr/config.in: Regenerate.
251 * avr/configure: Likewise.
252 * configure: Likewise.
253 * cris/config.in: Likewise.
254 * cris/configure: Likewise.
256 * configure.ac: m4_include toplevel config/override.m4.
257 * configure: Regenerate.
258 * avr/configure: Regenerate.
259 * cris/configure: Regenerate.
261 2009-07-30 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
263 * Makefile.in (datarootdir): New variable.
265 2009-05-18 Jon Beniston <jon@beniston.com>
267 * MAINTAINERS: Add Jon Beniston as maintainer of lm32 sim.
268 * configure.ac: Add lm32 target.
269 * lm32: New directory.
271 2009-05-11 Andrew Cagney <cagney@gnu.org>
273 * MAINTAINERS: Orphan ppc.
275 2009-05-08 Kevin Buettner <kevinb@redhat.com>
277 * m32c/gdb-if.c (m32c_signal_to_host): Rename to
278 m32c_signal_to_target. Change signal return values from SIGILL,
279 SIGTRAP, SIGSEGV, etc. to TARGET_SIGNAL_ILL, TARGET_SIGNAL_TRAP,
280 TARGET_SIGNAL_SEGV, etc. Fix all callers.
282 2009-04-30 Anthony Green <green@moxielogic.com>
284 * MAINTAINERS: Add myself for the moxie port.
285 * moxie: New directory.
286 * configure.ac: Add entry for moxie.
287 * configure: Regenerate.
289 2009-04-27 Tristan Gingold <gingold@adacore.com>
291 * avr: New directory.
292 * avr/interp.c, avr/Makefile.in, avr/configure.ac: New files.
293 * avr/config.in: New file, generated by autoheader.
294 * avr/configure: New file generated by autoconf.
295 * configure.ac: Add avr.
296 * configure: Regenerated.
298 2009-04-17 Carlos O'Donell <carlos@codesourcery.com>
300 * Makefile.in: Add dummy install-pdf, html, and
301 install-html targets.
303 2009-01-18 Hans-Peter Nilsson <hp@axis.com>
305 * cris/sim-if.c: Include errno.h.
306 (cris_start_address, cris_program_offset): New variables.
307 (OPTION_CRIS_PROGRAM_OFFSET, OPTION_CRIS_STARTADDR): New option
309 (cris_options): New options --cris-program-offset and
310 --cris-start-address.
311 (cris_option_handler): Handle new options.
312 (cris_program_offset_write, cris_set_section_offset_iterator)
313 (cris_offset_sections, cris_offset_sections): New functions.
314 (sim_load): Use cris_program_offset_write as function argument to
315 cris_load_elf_file, not sim_write.
316 (struct offsetinfo): New struct.
317 (cris_handle_interpreter): Fix typo in comment.
318 (sim_open): Call cris_offset_sections as soon as the bfd of the
319 infile is available. Gate bfd validity checks on abfd non-NULL.
320 (sim_create_inferior): Let cris_start_address when != -1 override
321 other start-address choices.
323 2009-01-06 Hans-Peter Nilsson <hp@axis.com>
325 * cris/traps.c (abort): Define to call sim_io_error.
326 (create_map): Make -1 imply a non-fixed address, not 0. All
327 callers changed. Only prefer the next higher unmapped address if
328 the last mapped address is no less than 0x40000000. Check that
329 the address to be mapped is not already mapped. Update head
331 (unmap_pages): Don't call abort when recursive call fails, just
332 note and return an error if a page in the range couldn't be unmapped.
333 (cris_bmod_handler, h_supr_set_handler, h_supr_get_handler)
334 (schedule, make_first_thread, cris_pipe_empty): New local variable sd.
335 (cris_break_13_handler) <case TARGET_SYS_mmap2>: Handle
336 non-MAP_FIXED argument overlapping existing map. For MAP_FIXED,
337 don't abort on page not being mapped. Handle non-anon filemap
338 with length padded to pagesize.
340 2009-01-03 Hans-Peter Nilsson <hp@axis.com>
342 * cris/sim-if.c (TARGET_AT_NULL, TARGET_AT_PHDR, TARGET_AT_PHENT)
343 (TARGET_AT_PHNUM, TARGET_AT_PAGESZ, TARGET_AT_BASE)
344 (TARGET_AT_FLAGS, TARGET_AT_ENTRY, TARGET_AT_UID, TARGET_AT_EUID)
345 (TARGET_AT_GID, TARGET_AT_EGID, TARGET_AT_HWCAP)
346 (TARGET_AT_CLKTCK): Remove redundant macros.
347 (AUX_ENT): Adjust to use standard ELF AT_* macros.
348 (AUX_ENTF): Ditto. Remove always-0 middle argument. Update all
350 (sim_open): Also pass AT_SECURE.
352 * cris/sim-main.h (struct _sim_cpu): New member
353 set_target_thread_data.
354 * cris/crisv32f.c (CRIS_TLS_REGISTER): Define.
355 * cris/crisv10f.c: Ditto.
356 * cris/cris-tmpl.c (MY (set_target_thread_data)): New function.
357 (MY (f_specific_init)): Set new _sim_cpu member to new function.
358 * cris/traps.c (TARGET_SYS_set_thread_area): Define.
359 (cris_break_13_handler) <case TARGET_SYS_set_thread_area>: New
362 * cris/traps.c (TARGET_SYS_exit_group): Define.
363 (cris_break_13_handler): Handle it like the exit for the last
366 * cris/traps.c (TARGET_UTSNAME): Update to 2009-01-01.
367 (TARGET_EPOCH): Update to match TARGET_UTSNAME. Correct comment.
368 (cris_break_13_handler) <case TARGET_SYS_uname>: Update to
369 2.6.27. Set machine field to the BFD printable name of the
372 * cris/traps.c (TARGET_MAP_DENYWRITE): Define.
373 (cris_break_13_handler) <case TARGET_SYS_mmap2>: Handle
374 TARGET_MAP_DENYWRITE.
376 * cris/traps.c (TARGET_SYS_access, TARGET_R_OK, TARGET_W_OK)
377 (TARGET_X_OK, TARGET_F_OK): Define.
378 (cris_break_13_handler) <case TARGET_SYS_access>: New case.
380 * cris/semcrisv32f-switch.c: Regenerate.
382 2008-12-30 Hans-Peter Nilsson <hp@axis.com>
384 * cris/sim-if.c (sim_open): If sim_analyze_program fails, emit
385 just a short CRIS-specific notice. Tweak the wording for a
386 failing architecture test.
388 * cris/traps.c (TARGET_SYS_writev): New macro.
389 (is_mapped_only, cris_dump_map): New functions.
390 (cris_break_13_handler) <case TARGET_SYS_mmap2>: Handle more flags
391 and prot combinations and a non-zero page-offset. If
392 TARGET_MAP_FIXED, unmap pages before mapping them.
393 <case TARGET_SYS_mprotect>: When checking, allow any length
394 argument. Don't actually do anything.
395 <case TARGET_SYS_writev>: New case.
397 * cris/Makefile.in (SIM_OBJS): Remove sim-hload.o.
398 * cris/sim-if.c: Include elf-bfd.h.
399 (struct progbounds): New members end_loadmem, start_nonloadmem.
400 (xprintf, eprintf): New functions, copied from common/sim-load.c.
401 (cris_load_elf_file, sim_load, cris_get_progbounds): New functions.
402 (get_progbounds_iterator): Renamed from get_progbounds. Make
403 static. Update head comment. Set new struct progbounds members.
404 (exec_load_addr, interp_load_addr, interp_start_addr): New static
406 (aux_ent_phdr, aux_ent_phent, aux_ent_phnum, aux_ent_base)
407 (aux_ent_entry, cris_write_interp, cris_handle_interpreter): New
409 (sim_open): New constant array auxv_entries. Rewrite AUX_ENT
410 handling to use auxv_entries. Improve error message and checking
411 for invalid programs. Use new variable abfd for the program
412 instead of for each access reaching into sd to get it.
413 (sim_create_inferior): If non-zero, use interp_start_addr instead
414 of the program start address.
415 (cris_disassemble_insn): Remove incorrect and unclear, supposedly
416 stale comment. Always specify little-endian.
418 2008-07-29 Nick Clifton <nickc@redhat.com>
420 * common/genmloop.sh: Add new parameter: -shell to specify the
421 command interpreter to use to run the input file. This is
422 necessary because otherwise SHELL is taken from the user's
423 environment, and not from the makefile that invoked this script
424 and the user might not be running an sh-like shell.
425 * cris/Makefile.in: Pass -shell parameter to genmloop.sh.
426 * fr30/Makefile.in: Likewise.
427 * frv/Makefile.in: Likewise.
428 * i960/Makefile.in: Likewise.
429 * iq2000/Makefile.in: Likewise.
430 * m32r/Makefile.in: Likewise.
432 * frv/mloop.in: Add missing start of line comment marker.
434 2008-07-11 Hans-Peter Nilsson <hp@axis.com>
436 * cris/configure: Regenerate to track ../common/common.m4 changes.
437 * cris/config.in: Ditto.
439 2008-06-06 Vladimir Prus <vladimir@codesourcery.com>
440 Daniel Jacobowitz <dan@codesourcery.com>
441 Joseph Myers <joseph@codesourcery.com>
443 * cris/configure: Regenerate.
445 2008-05-09 Olivier Hainque <hainque@adacore.com>
447 * ppc/altivec.igen (vperm): Latch inputs into temporaries.
449 2008-03-25 M R Swami Reddy <MR.Swami.Reddy@nsc.com>
451 * MAINTAINERS: Add myself as maintainer of cr16 port.
453 2008-02-12 M Ranga Swami Reddy <MR.Swami.Reddy@nsc.com>
455 Add simulator for National cr16 processor.
456 * cr16: New directory.
457 * configure.ac: Add entry for National cr16.
458 * configure: Regenerate.
460 2008-02-05 DJ Delorie <dj@redhat.com>
462 * configure.ac (v850): V850 now has a testsuite.
463 * configure (v850): Likewise.
465 2008-01-01 Daniel Jacobowitz <dan@codesourcery.com>
467 Updated copyright notices for most files.
469 2007-12-19 DJ Delorie <dj@redhat.com>
471 * frv/frv.c (frvbf_cut): Only look at the six LSBs of
474 2007-10-22 Hans-Peter Nilsson <hp@axis.com>
476 * cris/arch.c, cris/arch.h, cris/cpuall.h, cris/cpuv10.c,
477 cris/cpuv10.h, cris/cpuv32.c, cris/cpuv32.h, cris/cris-desc.c,
478 cris/cris-desc.h, cris/cris-opc.h, cris/decodev10.c,
479 cris/decodev10.h, cris/decodev32.c, cris/decodev32.h,
480 cris/modelv10.c, cris/modelv32.c, cris/semcrisv10f-switch.c,
481 cris/semcrisv32f-switch.c: Regenerate.
483 2007-08-24 Joel Brobecker <brobecker@adacore.com>
485 Switch the license of all files explicitly copyright the FSF
488 2007-03-27 Brooks Moses <brooks.moses@codesourcery.com>
490 * Makefile.in: Add dummy "pdf" target.
492 2007-02-20 Hans-Peter Nilsson <hp@axis.com>
494 * cris/traps.c (dump_statistics): Change format for cycle numbers
495 to %llu and cast parameters to unsigned long long.
497 2007-02-16 Thiemo Seufer <ths@mips.com>
499 * Makefile.in (FLAGS_TO_PASS, TARGET_FLAGS_TO_PASS): Add RUNTEST.
501 2007-01-28 Manuel Lauss <slauss@resi.at>
503 * configure.ac (sh64-*-*): Change to sh64*-*-*.
504 (sh-*-*): Change to sh*-*-*.
505 * configure: Regenerated.
507 2007-01-09 Daniel Jacobowitz <dan@codesourcery.com>
509 Updated copyright notices for most files.
511 2006-12-20 Hans-Peter Nilsson <hp@axis.com>
513 * Makefile.in (autoconf-common autoheader-common): Only run
514 autoheader on subdirs with a file config.in.
516 * configure.ac (common): Make the default "yes" for all targets
518 * configure: Regenerate.
520 * Makefile.in (autoconf-common autoheader-common): In documented
521 usage, say SHELL=/bin/sh.
522 (.PHONY): Add autoheader-common.
524 * MAINTAINERS: Add self as authorized committer for *.
526 2006-10-02 Edgar E. Iglesias <edgar@axis.com>
527 Hans-Peter Nilsson <hp@axis.com>
529 * cris/cris-sim.h (enum cris_unknown_syscall_action_type)
530 (cris_unknown_syscall_action): Declare.
531 * cris/sim-if.c (cris_unknown_syscall_action): Define.
532 (cris_options): Add cris-unknown-syscall option.
533 (cris_option_handler): Correct comment about and error message for
534 invalid --cris-cycles argument. Handle --cris-unknown-syscall.
535 * cris/traps.c: Include stdarg.h
536 (cris_unknown_syscall): New function.
537 (cris_break_13_handler): Instead of sim_io_eprintf and
538 sim_engine_halt, call cris_unknown_syscall to handle more or less
539 unknown syscalls. Adjust code as necessary to handle return
542 2006-09-30 Daniel Jacobowitz <dan@codesourcery.com>
544 * MAINTAINERS: Add Dave Brolley for sh64.
546 2006-09-30 Hans-Peter Nilsson <hp@axis.com>
548 * cris/traps.c (TARGET_PIPE_BUF): New macro.
549 (cris_pipe_empty): Correct initialization of "remaining". Only
550 adjust the "write" return value if more than TARGET_PIPE_BUF bytes
553 2006-09-29 Hans-Peter Nilsson <hp@axis.com>
555 * cris/configure.ac: Check for limits.h and sys/param.h.
556 * cris/configure, cris/config.in: Rebuild.
557 * cris/traps.c (SIM_PATHMAX): New macro.
558 (cris_break_13_handler): Use SIM_PATHMAX, not MAXPATHLEN.
560 2006-08-08 Joel Sherrill <joel.sherrill@oarcorp.com>
562 * configure.ac (sparc-*-rtems*|sparc-*-elf*): Enable erc32 simulator.
563 * Makefile.in (FLAGS_TO_PASS): Include libdir.
564 * configure: Regenerated.
566 2006-06-05 Daniel Jacobowitz <dan@codesourcery.com>
568 * cris/configure: Regenerated.
570 2006-05-31 Daniel Jacobowitz <dan@codesourcery.com>
572 * cris/configure: Regenerated.
574 2006-05-05 Andreas Schwab <schwab@suse.de>
576 * configure.ac (CFLAGS_FOR_BUILD): Set and substitute.
577 * configure: Regenerate.
579 * Makefile.in (CFLAGS_FOR_BUILD): Define.
580 (CC_FOR_BUILD): Don't override.
581 (FLAGS_TO_PASS): Pass CFLAGS_FOR_BUILD.
583 2006-05-04 Daniel Jacobowitz <dan@codesourcery.com>
585 * MAINTAINERS: Add an "Authorized committers" section, and list
588 2006-04-08 Hans-Peter Nilsson <hp@axis.com>
590 * cris/crisv32f.c (MY (deliver_interrupt)): Set CCS to new_ccs.
592 2006-04-03 Hans-Peter Nilsson <hp@axis.com>
594 * cris/dv-cris.c, cris/dv-rv.c, cris/rvdummy.c: New files.
595 * cris/Makefile.in (CONFIG_DEVICES): Remove redundant setting.
596 (dv-cris.o, dv-rv.o rvdummy$(EXEEXT), rvdummy.o): New rules.
597 (all): Depend on rvdummy$(EXEEXT).
598 * cris/configure.ac: Call SIM_AC_OPTION_WARNINGS. Check for
599 sys/socket.h and sys/select.h. Call SIM_AC_OPTION_HARDWARE,
601 * cris/configure: Regenerate.
602 * cris/cris-sim.h (cris_have_900000xxif): Declare here.
603 (enum cris_interrupt_type, crisv10deliver_interrupt)
604 (crisv32deliver_interrupt: New declarations.
605 * cris/cris-tmpl.c [WITH_HW] (MY (f_model_insn_after)): Call
606 sim_events_tickn and set state-events member work_pending when it's
607 time for the next event.
608 [WITH_HW] (MY (f_specific_init)): Set CPU-model-specific
609 interrupt-delivery function.
610 * cris/crisv10f.c (MY (deliver_interrupt)): New function.
611 * cris/crisv32f.c (MY (deliver_interrupt)): New function.
612 * cris/devices.c: Include hw-device.h.
613 (device_io_read_buffer) [WITH_HW]: Call hw_io_read_buffer.
614 (device_io_write_buffer): Only perform 0x900000xx-functions if
615 cris_have_900000xxif is nonzero. Else if WITH_HW defined,
616 call hw_io_write_buffer. Add return 0 last in function.
617 * cris/sim-if.c (cris_have_900000xxif): Now global.
618 (sim_open) [WITH_HW]: Clear deliver_interrupt cpu member.
619 Force "-model" option, effectively.
620 * cris/sim-main.h (cris_interrupt_delivery_fn): New type.
621 (struct _sim_cpu) [WITH_HW]: New member deliver_interrupt.
623 2006-04-02 Hans-Peter Nilsson <hp@axis.com>
625 * cris/Makefile.in (CRISV10F_OBJS): Remove semcrisv10f-switch.o.
626 (CRISV32F_OBJS): Remove semcrisv32f-switch.o.
627 (semcrisv10f-switch.o, semcrisv32f-switch.o: Remove dependency rules.
629 2006-03-13 DJ Delorie <dj@redhat.com>
631 * MAINTAINERS: Add self as m32c sim maintainer.
633 2006-02-23 Hans-Peter Nilsson <hp@axis.com>
635 * cris/traps.c (syscall_map): Remove CB_SYS_time / TARGET_SYS_time
637 (cris_break_13_handler) <case TARGET_SYS_time>: New case.
639 2006-01-23 Jim Blandy <jimb@redhat.com>
641 Add simulator for Renesas M32C and M16C.
643 * m32c: New directory.
644 * configure.ac: Add entry for Renesas M32C.
645 * configure: Regenerate.
647 2006-01-10 Hans-Peter Nilsson <hp@axis.com>
649 * cris/cris-tmpl.c (MY (f_model_insn_before)): Only display basic
650 cycle count for the current insn.
652 2005-12-06 Hans-Peter Nilsson <hp@axis.com>
654 * cris/cpuv10.h, cris/cpuv32.h, cris/cris-desc.c, cris/cris-opc.h,
655 cris/decodev10.c, cris/decodev10.h, cris/decodev32.c,
656 cris/decodev32.h, cris/modelv10.c, cris/modelv32.c,
657 cris/semcrisv10f-switch.c, cris/semcrisv32f-switch.c: Regenerate.
659 2005-12-05 Hans-Peter Nilsson <hp@axis.com>
661 * cris/arch.c, cris/arch.h, cris/cpuall.h, cris/cpuv10.c,
662 cris/cpuv10.h, cris/cpuv32.c, cris/cpuv32.h, cris/cris-desc.c,
663 cris/cris-desc.h, cris/cris-opc.h, cris/decodev10.c,
664 cris/decodev10.h, cris/decodev32.c, cris/decodev32.h,
665 cris/modelv10.c, cris/modelv32.c, cris/semcrisv10f-switch.c,
666 cris/semcrisv32f-switch.c: Regenerate.
668 2005-11-20 Hans-Peter Nilsson <hp@axis.com>
670 * cris/traps.c (TARGET_O_RDONLY, TARGET_O_WRONLY): Define.
671 (open_map): Use TARGET_O_ACCMODE, TARGET_O_RDONLY and
673 (cris_break_13_handler) <case TARGET_SYS_fcntl>: Add support for
674 F_GETFL on fd 0, 1 and 2.
676 2005-11-17 Hans-Peter Nilsson <hp@axis.com>
678 * cris/sim-main.h (struct _sim_cpu): New members last_syscall,
679 last_open_fd, last_open_flags.
680 * cris/traps.c: Don't include targ-vals.h.
681 (TARGET_O_ACCMODE): Define.
682 (cris_break_13_handler): Set new _sim_cpu members.
683 <case TARGET_SYS_fcntl>: Support special case of F_GETFL.
684 Rearrange code as switch. Emit "unimplemented" abort for
685 unimplemented fcntl calls.
687 * cris/traps.c (TARGET_SYS_stat): Define.
688 (syscall_stat32_map): Add entry for TARGET_SYS_stat.
689 (cris_break_13_handler) <case TARGET_SYS_stat>: New case.
691 2005-11-16 Hans-Peter Nilsson <hp@axis.com>
693 * cris/cris-tmpl.c (MY (f_model_insn_before)): Make sure only the
694 low 32 bits are used after an unsigned long cast.
696 2005-05-28 Hans-Peter Nilsson <hp@axis.com>
698 * cris/Makefile.in (stamp-v32fmloop): Depend on stamp-v10fmloop.
700 2005-05-26 Chris Demetriou <cgd@netbsd.org>
702 * MAINTAINERS: Update my mail address, move myself to the
703 "Past maintainers" section.
705 2005-05-17 Corinna Vinschen <vinschen@redhat.com>
707 * configure.ac: Add igen to v850 build.
708 * configure: Regenerate.
710 2005-04-29 Paul Brook <paul@codesourcery.com>
712 * common/callback.c (PIPE_BUF): Provide default definition.
713 (os_lstat): Use stat if lstat is not available on the host.
714 (os_ftruncate): Return EINVAL if not available on the host.
715 (os_truncate): Ditto.
716 * common/configure.ac: Check for lstat, truncate and ftruncate.
717 * common/configure: Regenerate.
718 * common/config.in: Regenerate.
720 2005-04-27 Paul Brook <paul@codesourcery.com>
722 * common/Make-common.in: Add $(EXEEXT) to "run".
724 2005-04-18 Hans-Peter Nilsson <hp@axis.com>
726 * cris/traps.c (cris_break_13_handler) <case TARGET_SYS_mmap2>:
727 For ((len & 8191) != 0 && fd == (USI) -1), don't say this isn't
728 implemented. In call to create_map, pad length argument to 8k.
730 2005-04-15 Corinna Vinschen <vinschen@redhat.com>
732 * configure.ac: Add explicit sh64 case.
733 * configure: Regenerate.
735 2005-03-30 Paul Brook <paul@codesourcery.com>
737 * arm/wrapper.c: Provide SIGTRAP and SIGBUS.
739 2005-03-24 Hans-Peter Nilsson <hp@axis.com>
741 * cris/Makefile.in (stamp-v10fcpu, stamp-v32fcpu): Add kludge to
742 include cgen-ops.h in decodev10.c and decodev32.c.
743 * cris/sim-main.h: Don't include cgen-ops.h here.
744 * cris/arch.c, cris/arch.h, cris/cpuall.h, cris/cpuv10.c,
745 cris/cpuv10.h, cris/cpuv32.c, cris/cpuv32.h, cris/cris-desc.c,
746 cris/cris-desc.h, cris/cris-opc.h, cris/decodev10.c,
747 cris/decodev10.h, cris/decodev32.c, cris/decodev32.h,
748 cris/modelv10.c, cris/modelv32.c, cris/semcrisv10f-switch.c,
749 cris/semcrisv32f-switch.c: Regenerate.
751 * cris/traps.c (cris_break_13_handler) <case
752 TARGET_SYS_rt_sigaction>: Rename sa_handler, sa_flags,
753 sa_restorer, sa_mask_low, sa_mask_high to target_sa_handler etc.
755 2005-03-23 Mark Kettenis <kettenis@gnu.org>
757 * cris/configure: Regenerate.
759 2005-02-28 Jim Blandy <jimb@redhat.com>
761 * d10v/configure.ac, igen/configure.ac, m68hc11/configure.ac,
762 mips/configure.ac, mn10300/configure.ac, v850/configure.ac:
763 Regenerated, after change to common/aclocal.m4.
765 2005-02-18 Corinna Vinschen <vinschen@redhat.com>
767 * iq2000: New target subdirectory.
768 * configure.ac: Add iq2000 target.
769 * configure: Regenerate.
771 2005-01-29 Hans-Peter Nilsson <hp@axis.com>
773 * Makefile.in (all, clean mostlyclean, distclean maintainer-clean)
774 (realclean, install): Fail if subdir make failed.
776 2005-01-28 Hans-Peter Nilsson <hp@axis.com>
778 * cris: New directory, simulator for Axis Communications CRIS
779 including CRIS v32, CGEN-based.
780 * configure.ac: Add corresponding configury.
781 * configure: Regenerate.
783 2005-01-17 Andrew Cagney <cagney@gnu.org>
785 * configure.ac: For mips*-*-* and mn10300*-*-* configure the
786 common directory. Remove sparc*-*-* from list.
788 2005-01-11 Andrew Cagney <cagney@gnu.org>
790 * Makefile.in (autoconf-common autoheader-common): Add --force to
791 autoconf and autoheader.
792 (autoconf-common autoheader-common)
793 (autoconf-install autoheader-install): Check for configure.ac, not
795 * configure.ac: Delete AC_CONFIG_AUX_DIR.
796 * configure: Re-generate.
798 2005-01-07 Andrew Cagney <cagney@gnu.org>
800 * configure.ac: Replace configure.in. Requires autoconf 2.59 and
801 correctly calls AC_CONFIG_SUBDIRS.
802 * configure: Re-generate.
804 2004-12-01 Andrew Cagney <cagney@gnu.org>
806 * i960, h8500: Delete directory.
808 2004-11-12 Andrew Cagney <cagney@gnu.org>
810 * d30v, fr30, mn10200, z8k: Delete directory.
812 2004-03-10 Ben Elliston <bje@gnu.org>
814 * MAINTAINERS: Update my mail address.
816 2004-01-26 Chris Demetriou <cgd@broadcom.com>
818 * configure.in (mips*-*-*): Configure in testsuite.
819 * configure: Regenerate.
821 2003-10-08 Dave Brolley <brolley@redhat.com>
823 * configure.in: Move frv handling to alphabetically correct placement.
825 2003-09-03 Andreas Schwab <schwab@suse.de>
827 * Makefile.in (FLAGS_TO_PASS): Pass down $(bindir) and $(mandir).
829 2003-08-29 Dave Brolley <brolley@redhat.com>
831 * MAINTAINERS: Add myself as maintainer of the FRV port.
833 2003-08-20 Michael Snyder <msnyder@redhat.com>
834 Dave Brolley <brolley@redhat.com>
836 * frv/: New directory, simulator for the Fujitsu FRV.
837 * configure.in: Add frv configury.
838 * configure: Regenerate.
840 2003-08-10 Ben Elliston <bje@wasabisystems.com>
842 * MAINTAINERS: Update my mail address.
844 2003-08-09 Andrew Cagney <cagney@redhat.com>
846 * MAINTAINERS: Andrew Cagney (mips) and Geoff Keating (ppc) drop
847 maintenance. List igen and sh maintainers. Mention that target
848 and global maintainers pick up the slack.
850 2003-07-09 Michael Snyder <msnyder@redhat.com>
852 * configure.in: Add testsuite to extra_subdirs for sh.
853 * configure: Regenerate.
855 2003-01-23 Nick Clifton <nickc@redhat.com>
859 2002-04-02 Alexandre Oliva <aoliva@redhat.com>
861 * sh/gencode.c: Replace sh3e with sh2e except in fsqrt.
863 2002-08-24 Geoffrey Keating <geoffk@redhat.com>
865 * MAINTAINERS: Update my email address.
867 2002-07-17 Andrew Cagney <ac131313@redhat.com>
869 * w65/: Delete directory.
871 2002-07-16 Andrew Cagney <ac131313@redhat.com>
873 * configure.in (extra_subdirs): Mark fr30-*-* as obsolete.
874 * configure: Re-generate.
876 2002-07-13 Andrew Cagney <ac131313@redhat.com>
878 * configure.in (extra_subdirs): Mark d30v-*-* as obsolete.
879 * configure: Re-generate.
881 2002-06-16 Andrew Cagney <ac131313@redhat.com>
883 * Makefile.in (autoconf-changelog autoheader-changelog): Let name,
884 id, date and host to be overriden by NAME, ID, DATE and HOST
885 respectfully. Use ISO dates.
887 Thu Jun 6 12:34:13 2002 Andrew Cagney <cagney@redhat.com>
889 * Makefile.in (ChangeLog): New makefile variable.
890 * README-HACKING: Mention the ChangeLog makefile variable.
892 2002-06-01 Andrew Cagney <ac131313@redhat.com>
894 * tic80/: Delete directory.
896 2002-05-16 Stephane Carrez <stcarrez@nerim.fr>
898 * MAINTAINERS: Update my email address.
900 2002-03-06 Stephane Carrez <Stephane.Carrez@worldnet.fr>
902 * MAINTAINERS: Record self as maintainer of m68hc11 simulator.
904 2002-03-01 Frank Ch. Eigler <fche@redhat.com>
906 * MAINTAINERS: Record self as a co-maintainer of just common/.
908 2002-02-07 Nick Clifton <nickc@cambridge.redhat.com>
910 * MAINTAINERS: Point to GDB files describing overall maintaince
911 and check-in procedures.
913 2002-01-10 Nick Clifton <nickc@cambridge.redhat.com>
915 * MAINTAINERS: Add myself for ARM portions.
917 2001-10-19 Andrew Cagney <ac131313@redhat.com>
919 * configure.in: When Linux or NetBSD, enable PowerPC simulator.
920 * configure: Re-generate.
922 2001-02-16 Ben Elliston <bje@redhat.com>
924 * MAINTAINERS: Add myself for common portions.
926 2001-01-15 Chris Demetriou <cgd@broadcom.com>
928 * MAINTAINERS: Added self and Andrew for the mips sim.
930 2000-10-25 Geoff Keating <geoffk@cygnus.com>
932 * MAINTAINERS: Added self and Andrew for the ppc sim.
934 Thu Jul 27 21:26:26 2000 Andrew Cagney <cagney@b1.cygnus.com>
936 From Stephane Carrez <Stephane.Carrez@worldnet.fr>:
937 * m68hc11: New directory.
939 * configure: Regenerate.
941 Tue Jul 4 13:43:54 2000 Andrew Cagney <cagney@b1.cygnus.com>
943 * tic80: New directory.
944 * configure.in: Add configury.
945 * configure: Regenerate.
947 2000-04-20 Nick Clifton <nickc@cygnus.com>
949 * configure.in (extra_subdirs): Add testsuite to strongarm
951 * configure: Regenerate.
953 Sat Mar 4 16:48:54 2000 Andrew Cagney <cagney@b1.cygnus.com>
955 * MAINTAINERS: New file. Blank.
957 1999-11-18 Ben Elliston <bje@cygnus.com>
959 * configure.in: Require autoconf 2.13 and remove obsolete
960 invocation of AC_C_CROSS.
961 * configure: Regenerate.
963 1999-09-29 Doug Evans <devans@casey.cygnus.com>
965 * configure.in: Configure the testsuite directory for thumb.
966 * configure: Regenerate.
968 1999-07-16 Ben Elliston <bje@cygnus.com>
970 * configure.in: Configure the testsuite directory for arm.
971 * configure: Regenerate.
973 1999-04-08 Nick Clifton <nickc@cygnus.com>
975 * configure.in: Add support for MCore target.
976 * configure: Regenerate.
978 1999-03-14 Stan Shebs <shebs@andros.cygnus.com>
980 * Makefile.in (FLAGS_TO_PASS, TARGET_FLAGS_TO_PASS): Remove
981 RUNTEST instead of commenting out, fixes portability problem.
983 1999-02-08 Nick Clifton <nickc@cygnus.com>
985 * configure.in: Add support for StrongARM target.
986 * configure: Regenerate.
988 1999-01-04 Jason Molenda (jsm@bugshack.cygnus.com)
990 * configure.in: Require autoconf 2.12.1 or higher.
992 1998-12-08 James E Wilson <wilson@wilson-pc.cygnus.com>
994 * configure.in (i960-*-*): Add.
995 * configure: Rebuild.
997 Wed Nov 4 19:11:43 1998 Dave Brolley <brolley@cygnus.com>
999 * configure.in: Added case for fr30-*-*.
1000 * configure: Regenerated.
1002 Fri Sep 25 10:12:19 1998 Christopher Faylor <cgf@cygnus.com>
1004 * ppc/Makefile.in: Add EXEEXT to installed powerpc-eabi-run program
1005 to allow successful operation on Windows.
1007 Thu May 28 14:59:46 1998 Jillian Ye <jillian@cygnus.com>
1009 * Makefile.in: Take RUNTEST out of FLAGS_TO_PASS so that make
1010 check can be invoked recursively.
1012 Wed Apr 29 12:38:53 1998 Mark Alexander <marka@cygnus.com>
1014 * configure.in: Build simulator on sparclite and sparc86x targets.
1015 * configure: Regenerate.
1017 Sun Apr 26 15:21:01 1998 Tom Tromey <tromey@cygnus.com>
1019 * Makefile.in (autoconf-common autoheader-common): Don't pass -l
1020 to autoconf and autoheader.
1022 Fri Apr 24 11:14:13 1998 Tom Tromey <tromey@cygnus.com>
1024 * Makefile.in (autoconf-common autoheader-common): Pass `-l
1025 ../common' to autoconf and autoheader. Unconditionally run
1026 autoconf in every subdir.
1027 (autoconf-changelog autoheader-changelog): Unconditionally run
1028 commands in every subdir.
1029 (autoconf-install autoheader-install): Likewise.
1031 Tue Mar 24 17:12:43 1998 Stu Grossman <grossman@bhuna.cygnus.co.uk>
1033 * Makefile.in: Get SHELL from configure.
1034 * (FLAGS_TO_PASS): Pass down SHELL.
1035 * configure: Regenerate with autoconf 2.12.1 to fix shell issues for
1038 Tue Mar 24 11::18:00 1998 Joyce Janczyn <janczyn@cygnus.com>
1040 * configure.in (extra_subdirs): Enable igen for mn10300.
1041 * configure: Re-generate.
1043 Tue Dec 2 10:10:42 1997 Nick Clifton <nickc@cygnus.com>
1045 * configure.in (extra_subdirs): Add support for thumb target.
1047 * configure (extra_subdirs): Add support for thumb target.
1049 Wed Oct 8 12:38:48 1997 Andrew Cagney <cagney@b1.cygnus.com>
1051 * configure.in (extra_subdirs): Add IGEN directory when MIPS
1053 * configure: Regenerate.
1055 Fri Sep 12 13:10:31 1997 Andrew Cagney <cagney@b1.cygnus.com>
1057 * configure.in (extra_subdirs): v850ea needs igen.
1058 * configure: Re-generate.
1060 Mon Sep 1 16:48:23 1997 Andrew Cagney <cagney@b1.cygnus.com>
1062 * configure.in (testdir): When a testsuite directory, add that to
1063 the list of confdirs.
1065 Tue Aug 19 11:17:46 1997 Andrew Cagney <cagney@b1.cygnus.com>
1067 * configure.in (extra_subdirs): Enable igen ready for V850.
1069 Tue Aug 26 15:14:48 1997 Andrew Cagney <cagney@b1.cygnus.com>
1071 * configure.in (w65-*-*, only_if_enabled): Set.
1072 * configure: Re-generate.
1074 Mon Aug 25 16:26:53 1997 Andrew Cagney <cagney@b1.cygnus.com>
1076 * configure.in (sparc*-*-*, only_if_enabled): Set
1077 only_if_enabled=yes. Check only_if_enabled before enabling a
1079 * configure: Regenerate.
1081 Mon Aug 18 10:56:59 1997 Nick Clifton <nickc@cygnus.com>
1083 * configure.in (extra_subdirs): Add v850e target.
1085 Mon Aug 18 10:56:59 1997 Nick Clifton <nickc@cygnus.com>
1087 * configure.in (extra_subdirs): Add v850ea target.
1089 Fri Jul 25 11:40:47 1997 Doug Evans <dje@canuck.cygnus.com>
1091 * configure.in (sparc*-*-*): Don't build erc32.
1092 * configure: Regenerate.
1094 Thu Apr 24 00:47:20 1997 Doug Evans <dje@canuck.cygnus.com>
1096 * configure.in (m32r-*-*): New target.
1097 * configure: Regenerate.
1099 * Makefile.in (autoconf-common, autoconf-changelog): Change $* to $@.
1101 Mon Apr 21 22:57:55 1997 Andrew Cagney <cagney@b1.cygnus.com>
1103 * Makefile.in (.NOEXPORT, MAKEOVERRIDES): Moved to end, BSD make
1104 thought that .NOEXPORT was the default target.
1106 Fri Apr 11 17:18:07 1997 Ian Lance Taylor <ian@cygnus.com>
1108 * Makefile.in (clean mostlyclean): Restore targets accidentally
1109 deleted in earlier change.
1111 Thu Apr 3 12:20:32 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
1113 * Makefile.in (autoheader-common, autoheader-changelog,
1114 autoheader-install): Perform autoheader in addition to autoconf.
1116 Wed Apr 2 15:09:05 1997 Doug Evans <dje@canuck.cygnus.com>
1118 * Makefile.in (autoconf-install): New target.
1119 (autoconf-changelog): Try different way to obtain user name.
1121 Wed Apr 2 14:25:52 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
1123 * Makefile.in (autoconf-changelog): New target, update
1124 ChangeLog for all subdirectories - normally used after
1125 autoconf-common target.
1127 Wed Mar 19 14:26:21 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
1129 * configure.in (extra_subdirs): Include testsuite for d30v.
1130 * configure: Regenerate.
1132 * Makefile.in (RUNTEST, RUNTESTFLAGS): Borrow test rules from
1134 (check): New rules - drive the testsuite.
1136 Mon Mar 3 13:01:00 1997 Jeffrey A Law (law@cygnus.com)
1138 * configure.in: Add mn10200 configure lines accidentally
1140 * configure: Regenerated.
1142 Wed Feb 19 10:34:20 1997 Andrew Cagney <cagney@critters.cygnus.com>
1144 * configure.in (extra_subdirs): Generalize common sub directory
1146 (extra_subdirs): For d30v add igen to the list to be built.
1148 Sun Feb 16 16:37:47 1997 Andrew Cagney <cagney@critters.cygnus.com>
1150 * configure.in (d30v): New target.
1151 * configure: Regenerated.
1153 Wed Feb 19 23:17:13 1997 Jeffrey A Law (law@cygnus.com)
1155 * configure.in: Don't require GCC to build the mn10200
1157 * configure: Rebuilt.
1159 Wed Feb 5 13:28:13 1997 Doug Evans <dje@canuck.cygnus.com>
1161 * configure.in: Don't configure any subdirs if no simulator
1162 is being built. Don't use erc32 for sparc64.
1163 * configure: Regenerated.
1165 Tue Feb 4 13:19:39 1997 Doug Evans <dje@canuck.cygnus.com>
1167 * Makefile.in (autoconf-common): New target.
1168 * configure.in: Do configure common.
1169 * configure: Regenerated.
1171 Thu Jan 23 13:59:52 1997 Stu Grossman (grossman@critters.cygnus.com)
1173 * configure configure.in: Don't configure common anymore. Files
1174 from common are now built in the individual simualtor directories.
1175 This fixes problems with the WinGDB build procedure.
1177 Mon Jan 13 13:16:42 1997 Jeffrey A Law (law@cygnus.com)
1179 * configure: Enable the mn10200 simulator.
1181 Wed Nov 20 01:00:36 1996 Doug Evans <dje@canuck.cygnus.com>
1183 * configure.in (configdirs): Add common.
1184 * configure: Regenerated.
1186 Fri Nov 1 08:03:30 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1188 * configure.in (powerpc*-*-linux*): Treat like the other powerpc
1189 system V based targets.
1190 * configure: Regenerate.
1192 Thu Oct 17 12:50:08 1996 Doug Evans <dje@canuck.cygnus.com>
1194 * configure.in (--enable-sim-powerpc): Delete.
1195 (--enable-sim): Add.
1196 * configure: Regenerated.
1198 Fri Oct 11 21:13:43 1996 Jeffrey A Law (law@cygnus.com)
1200 * configure.in: Only build the V850 simulator if
1202 * configure: Rebuild.
1204 Sun Sep 8 17:22:50 1996 Ian Lance Taylor <ian@cygnus.com>
1206 * configure.in: Do build erc32 for DOS and Windows hosts.
1207 * configure: Rebuild.
1209 Wed Sep 4 18:11:27 1996 Stu Grossman (grossman@critters.cygnus.com)
1211 * Makefile.in erc32/Makefile.in: Don't set srcroot. This should
1212 be inherited from the parent. Remove INSTALL_XFORM and
1213 INSTALL_XFORM1. Make INSTALL be set from configure.
1215 Wed Sep 4 15:49:16 1996 Ian Lance Taylor <ian@cygnus.com>
1217 * configure.in: Only build the MIPS simulator if we are using
1219 * configure: Rebuild.
1221 Wed Aug 28 19:05:23 1996 Jeffrey A Law (law@cygnus.com)
1223 * configure.in (v850-*-*): Added V850 simulator.
1225 Thu Aug 1 17:08:41 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1227 * configure.in (d10v-*-*): Added D10V simulator.
1229 Wed Jun 26 12:33:57 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
1231 * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir,
1232 INSTALL_PROGRAM, INSTALL_DATA): Use autoconf-set values.
1234 * configure.in (AC_PREREQ): autoconf 2.5 or higher.
1235 (AC_PROG_INSTALL): Added.
1236 * configure: Rebuilt.
1238 Mon Jun 24 14:18:26 1996 Ian Lance Taylor <ian@cygnus.com>
1240 * configure.in: Only configure erc32 if using gcc.
1241 * configure: Rebuild.
1243 Tue Jun 4 09:24:21 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1245 * configure.in (sim_target): Build PowerPC simulator for powerpc
1246 System V.4, Solaris, and Elf targets.
1247 * configure: Regenerate with autoconf 2.10.
1249 Wed May 22 12:10:49 1996 Rob Savoye <rob@chinadoll>
1251 * configure.in: Only built erc32 simulator on Unix hosts as it
1253 * configure: Regenerated with autoconf 2.8.
1255 Sun May 19 20:20:40 1996 Rob Savoye <rob@chinadoll.cygnus.com>
1257 * erc32: Sparc simulator from the ESA.
1259 Sun Apr 7 21:00:09 1996 Fred Fish <fnf@cygnus.com>
1261 From: Miles Bader <miles@gnu.ai.mit.edu>
1262 * configure.in: Use AC_CHECK_TOOL to find AR & RANLIB.
1263 * configure: Regenerate using autoconf.
1265 Thu Feb 22 11:31:50 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1267 * Makefile.in (install): Fix typo.
1269 Wed Feb 21 11:59:57 1996 Ian Lance Taylor <ian@cygnus.com>
1271 * configure: Regenerate with autoconf 2.7.
1273 * Makefile.in (all): Simplify.
1274 (clean, mostlyclean): SUBDIRS may contain whitespace; fix the loop
1275 as in the all target.
1276 (distclean, maintainer-clean, realclean): Likewise.
1277 (install): Likewise.
1279 Thu Feb 15 18:37:00 1996 Fred Fish <fnf@cygnus.com>
1281 * Makefile.in (all): Remove extra '\' char from shell script.
1283 Wed Feb 14 16:43:59 1996 Mike Meissner <meissner@tiktok.cygnus.com>
1285 * Makefile.in (all): Avoid a for loop with zero elements, even if
1286 the loop will not be executed because of an if statement.
1288 Wed Jan 31 21:48:34 1996 Fred Fish <fnf@cygnus.com>
1290 * Makefile.in (install): Add missing semicolon in "fi \".
1292 Thu Nov 9 16:10:56 1995 Michael Meissner <meissner@tiktok.cygnus.com>
1294 * Makefile.in (AR, CC, CFLAGS, CC_FOR_BUILD, RANLIB): Pick up
1295 defaults from configure.
1297 * configure.in: Pick up AR, CC, CFLAGS, CC_FOR_BUILD, RANLIB using
1299 (powerpc*-*-eabi*): Build simulator for all powerpc eabi targets
1300 if either --enable-sim-powerpc is used, or the host compiler is
1303 Wed Nov 8 15:46:49 1995 James G. Smith <jsmith@pasanda.cygnus.co.uk>
1305 * configure.in (mips*-*-*): Added "mips" simulator target.
1306 * configure: Re-generated.
1308 Tue Oct 10 11:08:20 1995 Fred Fish <fnf@cygnus.com>
1310 * Makefile.in (BISON): Remove macro.
1311 (FLAGS_TO_PASS): Remove BISON.
1313 Sun Oct 8 04:26:27 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1315 * configure.in: Explicitly `exit 0' for broken shells.
1316 * configure: Rebuilt.
1318 Fri Oct 6 12:03:27 1995 Jim Wilson <wilson@chestnut.cygnus.com>
1320 * common/run.c (main): Initialize the callbacks.
1322 Wed Sep 20 13:34:50 1995 Ian Lance Taylor <ian@cygnus.com>
1324 * Makefile.in (maintainer-clean): New synonym for realclean.
1326 Fri Aug 25 11:53:43 1995 Michael Meissner <meissner@tiktok.cygnus.com>
1328 * configure.in (powerpc*-*-eabisim*): Only build the simulator if
1329 the target is powerpc*-*-eabisim*, since it requires GCC to build.
1331 Mon Aug 21 17:53:48 1995 Michael Meissner <meissner@tiktok.cygnus.com>
1333 * configure.in (powerpc{,le}-*-*): Add psim from Andrew Cagney
1334 <cagney@highland.com.au>.
1335 * configure: Regnerate from configure.in.
1337 Thu Aug 3 10:45:37 1995 Fred Fish <fnf@cygnus.com>
1339 * Update all FSF addresses except those in COPYING* files.
1341 Thu Jul 20 15:17:29 1995 Fred Fish <fnf@cygnus.com>
1343 * Makefile.in (CC_FOR_BUILD): Define default and arrange to pass
1344 submakes either default or passed in value.
1346 Wed Jul 5 14:32:54 1995 J.T. Conklin <jtc@rtl.cygnus.com>
1348 * Makefile.in (all, clean, distclean, mostlyclean, realclean,
1349 install): Changed targets so that they descend all
1350 subdirectories in $(SUBDIRS).
1351 (*-all, *-clean, *-install): Removed targets.
1353 * configure.in: Don't bother with target makefile fragments, they
1354 are no longer needed.
1355 * configure: regenerated.
1357 * Makefile.in, configure.in: converted to autoconf.
1358 * configure: New file, generated with autconf 2.4.
1360 Wed May 24 14:48:46 1995 Steve Chamberlain <sac@slash.cygnus.com>
1362 * Makefile.in: Support ARM.
1363 * configure.in: Ditto.
1365 Sun Jan 15 16:53:47 1995 Steve Chamberlain <sac@splat>
1367 * Makefile.in: Support W65.
1368 * configure.in: Ditto.
1370 Sun Mar 13 09:27:50 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
1372 * Makefile.in: Add TAGS target.
1374 Mon Sep 13 12:47:15 1993 K. Richard Pixley (rich@sendai.cygnus.com)
1376 * Makefile.in (all-z8k, install-z8k, clean-z8k, all-h8300,
1377 install-h8300, clean-h8300, all-h8500, install-h8500,
1378 clean-h8500, all-sh, install-sh, clean-sh): do not echo
1381 Wed Jun 30 14:12:05 1993 david d `zoo' zuhn (zoo at poseidon.cygnus.com)
1383 * Makefile.in: remove endian.h trace from h8500
1385 Sun Jun 13 13:08:58 1993 Jim Kingdon (kingdon@cygnus.com)
1387 * Makefile.in: Add distclean, realclean, and mostlyclean targets.
1389 Fri May 21 11:21:16 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
1391 * Makefile.in: make all of the all-* target (except all-nothing)
1392 depend on endian.h, so that if we're not building a simulator, we
1395 Fri May 21 10:55:06 1993 Ian Lance Taylor (ian@cygnus.com)
1397 * Makefile.in (check, installcheck): Added dummy targets.
1399 Mon May 3 21:39:43 1993 Fred Fish (fnf@cygnus.com)
1401 * Makefile.in (endian): Find endian.c in $(srcdir), and also
1402 explicitly make it, since some makes apparently don't work with
1403 VPATH and .c to executable rules (SunOS make for example).
1405 Mon May 3 08:29:01 1993 Steve Chamberlain (sac@thepub.cygnus.com)
1407 * Makefile.in (endian): Add explicit rule for broken makes.
1409 Mon Mar 15 15:47:53 1993 Ian Lance Taylor (ian@cygnus.com)
1411 * Makefile.in (info, install-info): New targets.
1412 (DO_INSTALL): Renamed from INSTALL, which is overridden by the top
1415 Wed Feb 10 20:12:27 1993 K. Richard Pixley (rich@ok.cygnus.com)
1417 * Makefile.in (endian.h): build endian.h via a temporary file so
1418 that we don't leave an incomplete file lying around on
1420 (clean): remove endian, e.h, and endian.h.
1422 Mon Feb 8 11:46:06 1993 Steve Chamberlain (sac@thepub.cygnus.com)
1424 * Makefile.in, configure.in: if target isn't supported, build a