1 2015-04-01 H.J. Lu <hongjiu.lu@intel.com>
3 * common/Make-common.in (CSEARCH): Remove $(ZLIBINC).
4 (BFD_LIB): Remove $(ZLIB).
5 (CONFIG_LIBS): Add $(ZLIB).
6 * ppc/Makefile.in (ZLIBINC): Removed.
7 (INCLUDES): Remove $(ZLIBINC).
8 (BFD_LIB): Remove $(ZLIB).
10 2015-04-01 H.J. Lu <hongjiu.lu@intel.com>
12 * arm/configure: Regenerated.
13 * avr/configure: Likewise.
14 * bfin/configure: Likewise.
15 * common/configure: Likewise.
16 * cr16/configure: Likewise.
17 * cris/configure: Likewise.
18 * d10v/configure: Likewise.
19 * erc32/configure: Likewise.
20 * frv/configure: Likewise.
21 * ft32/configure: Likewise.
22 * h8300/configure: Likewise.
23 * igen/configure: Likewise.
24 * iq2000/configure: Likewise.
25 * lm32/configure: Likewise.
26 * m32c/configure: Likewise.
27 * m32r/configure: Likewise.
28 * m68hc11/configure: Likewise.
29 * mcore/configure: Likewise.
30 * microblaze/configure: Likewise.
31 * mips/configure: Likewise.
32 * mn10300/configure: Likewise.
33 * moxie/configure: Likewise.
34 * msp430/configure: Likewise.
35 * ppc/configure: Likewise.
36 * rl78/configure: Likewise.
37 * rx/configure: Likewise.
38 * sh/configure: Likewise.
39 * sh64/configure: Likewise.
40 * v850/configure: Likewise.
42 2015-03-29 Mike Frysinger <vapier@gentoo.org>
44 * configure: Regenerate.
45 * configure.ac: Delete sim_testsuite check and config in testsuite.
46 * configure.tgt (sim_testsuite): Delete everywhere.
48 2015-03-28 Mike Frysinger <vapier@gentoo.org>
50 * configure: Regenerate.
51 * configure.tgt (avr*-*-*): Set sim_testsuite=yes.
53 2015-03-28 James Bowman <james.bowman@ftdichip.com>
55 * configure.tgt: Add FT32 entry.
56 * configure: Regenerate.
58 2015-03-16 Mike Frysinger <vapier@gentoo.org>
60 * .gitignore: Delete tconfig.h.
61 * README-HACKING: Change tconfig.in to tconfig.h.
63 2014-03-12 Nick Clifton <nickc@redhat.com>
65 * MAINTAINERS: Add myself as the maintainer for the MSP430.
67 2014-03-10 Mike Frysinger <vapier@gentoo.org>
69 * configure.tgt (msp430*-*-*): Set sim_testsuite to yes.
70 * configure: Regenerate.
72 2014-01-06 Tom Tromey <tromey@redhat.com>
74 * common/cgen-trace.c: Don't use old VA_* macros.
75 * common/sim-load.c (xprintf): Likewise.
76 * common/sim-trace.c (trace_printf, debug_printf): Likewise.
78 2014-01-06 Tom Tromey <tromey@redhat.com>
80 * README-HACKING: Don't use PARAMS.
81 * arm/wrapper.c: Don't use PARAMS.
82 * bfin/sim-main.h: Don't use PARAMS.
83 * common/callback.c: Don't use PARAMS.
84 * common/cgen-trace.c: Don't use PARAMS.
85 * common/run-sim.h: Don't use PARAMS.
86 * common/run.c: Don't use PARAMS.
87 * common/sim-base.h: Don't use PARAMS.
88 * common/sim-load.c: Don't use PARAMS.
89 * common/sim-options.h: Don't use PARAMS.
90 * common/sim-trace.c: Don't use PARAMS.
91 * common/sim-trace.h: Don't use PARAMS.
92 * common/sim-utils.h: Don't use PARAMS.
93 * cr16/cr16_sim.h: Don't use PARAMS.
94 * cr16/gencode.c: Don't use PARAMS.
95 * cr16/interp.c: Don't use PARAMS.
96 * cr16/simops.c: Don't use PARAMS.
97 * d10v/d10v_sim.h: Don't use PARAMS.
98 * d10v/gencode.c: Don't use PARAMS.
99 * d10v/interp.c: Don't use PARAMS.
100 * d10v/simops.c: Don't use PARAMS.
101 * erc32/erc32.c: Don't use PARAMS.
102 * erc32/exec.c: Don't use PARAMS.
103 * erc32/float.c: Don't use PARAMS.
104 * erc32/func.c: Don't use PARAMS.
105 * erc32/sis.c: Don't use PARAMS.
106 * erc32/sis.h: Don't use PARAMS.
107 * mips/interp.c: Don't use PARAMS.
108 * mips/sim-main.h: Don't use PARAMS.
109 * sh/interp.c: Don't use PARAMS.
110 * v850/sim-main.h: Don't use PARAMS.
111 * v850/v850_sim.h: Don't use PARAMS.
113 2013-11-07 Will Newton <will.newton@linaro.org>
116 * arm/wrapper.c (sim_create_inferior): Call init before
119 2013-11-07 Will Newton <will.newton@linaro.org>
122 * arm/wrapper.c (sim_create_inferior): Avoid calling
123 bfd_get_mach with a NULL bfd.
125 2013-06-21 Nick Clifton <nickc@redhat.com>
127 * msp430: New Directory.
128 * configure.tgt: Add it.
129 * configure: Regenerate.
131 2013-03-15 Steve Ellcey <sellcey@mips.com>
133 * arm/wrapper.c (sim_complete_command): Make char arguments const.
134 * avr/interp.c (sim_complete_command): Ditto.
135 * common/sim-options.c (sim_complete_command): Ditto.
136 * cr16/interp.c (sim_complete_command): Ditto.
137 * erc32/interf.c (sim_complete_command): Ditto.
138 * m32c/gdb-if.c (sim_complete_command): Ditto.
139 * microblaze/interp.c (sim_complete_command): Ditto.
140 * ppc/sim_calls.c (sim_complete_command): Ditto.
141 * rl78/gdb-if.c (sim_complete_command): Ditto.
142 * rx/gdb-if.c (sim_complete_command): Ditto.
143 * sh/interp.c (sim_complete_command): Ditto.
145 2013-01-01 Joel Brobecker <brobecker@adacore.com>
147 Update year range in copyright notice of all files.
149 2012-12-19 Joel Brobecker <brobecker@adacore.com>
151 Update old contact info in GPL license notices.
153 2012-12-19 Joel Brobecker <brobecker@adacore.com>
155 Update the non-FSF-copyrighted files in sim to GPLv3 or later.
157 2012-11-20 Pavel Chupin <pavel.v.chupin@intel.com>
159 * common/Make-common.in: Use lt_cv_dlopen_libs under PLUGINS
161 * common/acinclude.m4: Define lt_cv_dlopen_libs.
162 * arm/configure: Regenerate.
163 * avr/configure: Regenerate.
164 * bfin/configure: Regenerate.
165 * common/configure: Regenerate.
166 * cr16/configure: Regenerate.
167 * cris/configure: Regenerate.
168 * d10v/configure: Regenerate.
169 * erc32/configure: Regenerate.
170 * frv/configure: Regenerate.
171 * h8300/configure: Regenerate.
172 * igen/configure: Regenerate.
173 * iq2000/configure: Regenerate.
174 * lm32/configure: Regenerate.
175 * m32c/configure: Regenerate.
176 * m32r/configure: Regenerate.
177 * m68hc11/configure: Regenerate.
178 * mcore/configure: Regenerate.
179 * microblaze/configure: Regenerate.
180 * mips/configure: Regenerate.
181 * mn10300/configure: Regenerate.
182 * moxie/configure: Regenerate.
183 * ppc/configure: Regenerate.
184 * rl78/configure: Regenerate.
185 * rx/configure: Regenerate.
186 * sh/configure: Regenerate.
187 * sh64/configure: Regenerate.
188 * testsuite/configure: Regenerate.
189 * v850/configure: Regenerate.
191 2012-11-05 Stephane Carrez <Stephane.Carrez@gmail.com>
193 * MAINTAINERS: Update my email address.
195 2012-09-24 Steve Ellcey <sellcey@mips.com>
197 * mips/basic.exp: Add mips*-mti-elf* target.
198 * configure.ac: Add mips*-mti-elf* target.
199 * configure: Regenerate.
201 2012-06-15 Joel Brobecker <brobecker@adacore.com>
203 * configure: Regenerate.
205 2012-06-06 Michael Eager <eager@eagercon.com>
207 * microblaze/interp.c (config.h): Add #include.
209 2011-11-29 Joel Brobecker <brobecker@adacore.com>
211 * MAINTAINERS (Global Maintainers): New section. Add Mike
214 2011-11-28 DJ Delorie <dj@redhat.com>
216 * configure.tgt: Add rl78 support.
217 * configure: Regenerate.
218 * rl78: New directory.
219 * MAINTAINERS: Add myself as RL78 maintainer.
221 2011-07-08 Hans-Peter Nilsson <hp@axis.com>
223 * MAINTAINERS: Remove Thiemo Seufer.
225 2011-06-04 Mike Frysinger <vapier@gentoo.org>
227 * configure.tgt (bfin-*-*): Add sim_testsuite=yes.
228 * configure: Regenerate.
230 2011-05-04 Joseph Myers <joseph@codesourcery.com>
232 * configure.tgt (thumb*-*-* | strongarm*-*-* | xscale-*-*): Don't
234 * configure: Regenerate.
236 2011-03-05 Mike Frysinger <vapier@gentoo.org>
238 * MAINTAINERS: Add bfin entry.
239 * configure.tgt (bfin-*-*): Handle bfin targets.
240 * configure: Regenerate.
242 2011-01-05 Mike Frysinger <vapier@gentoo.org>
244 * .gitignore: Add /*/hw-config.h.
246 2010-12-23 Mike Frysinger <vapier@gentoo.org>
248 * .gitignore: New file.
250 2010-07-28 DJ Delorie <dj@redhat.com>
252 * MAINTAINERS: Add self as RX maintainer. Sort list.
254 2010-06-08 Nick Clifton <nickc@redhat.com>
256 * reg.c (set_oszc): Use unsigned int for the mask.
257 (set_szc, set_osz, set_sz): Likewise.
259 2010-04-26 Mike Frysinger <vapier@gentoo.org>
261 * configure.ac: Target logic moved out to and included from ...
262 * configure.tgt: ... this new file.
263 * configure: Regenerated.
265 2010-04-12 Mike Frysinger <vapier@gentoo.org>
267 * README-HACKING: Add more sections.
269 2010-02-11 Doug Evans <dje@sebabeach.org>
271 * cris/cpuv10.h, * cris/cpuv32.h, * cris/cris-desc.c,
272 * cris/cris-desc.h, * cris/decodev10.c, * cris/decodev32.c,
273 * cris/modelv10.c, * cris/modelv32.c, * cris/semcrisv10f-switch.c,
274 * cris/semcrisv32f-switch.c: Regenerate.
276 2010-01-09 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
278 * avr/configure: Regenerate.
279 * cris/configure: Regenerate.
280 * microblaze/configure: Regenerate.
282 2010-01-02 Doug Evans <dje@sebabeach.org>
284 * cris/arch.c, * cris/arch.h, * cris/cpuall.h, * cris/cpuv10.c,
285 * cris/cpuv10.h, * cris/cpuv32.c, * cris/cpuv32.h, * cris/cris-desc.c,
286 * cris/cris-desc.h, * cris/cris-opc.h, * cris/decodev10.c,
287 * cris/decodev10.h, * cris/decodev32.c, * cris/decodev32.h,
288 * cris/modelv10.c, * cris/modelv32.c, * cris/semcrisv10f-switch.c,
289 * cris/semcrisv32f-switch.c: Regenerate, update copyright year.
291 2010-01-01 Doug Evans <dje@sebabeach.org>
293 * cris/mloop.in: Fix copyright year update snafu.
295 2009-11-24 Joel Brobecker <brobecker@adacore.com>
297 * common/aclocal.m4: Add include of ../../config/zlib.m4.
298 * common/common.m4: Use AM_ZLIB to check for zlib support.
299 * ppc/configure.ac: Likewise.
300 * arm/configure, avr/configure, common/configure, cr16/configure,
301 cris/configure, d10v/configure, erc32/configure, frv/configure,
302 h8300/configure, iq2000/configure, lm32/configure, m32c/configure,
303 m32r/configure, m68hc11/configure, mcore/configure,
304 microblaze/configure, mips/configure, mn10300/configure,
305 moxie/configure, ppc/configure, sh/configure, sh64/configure,
306 v850/configure: Regenerate.
308 2009-11-24 DJ Delorie <dj@redhat.com>
311 * configure.ac: Add entry for Renesas RX.
312 * configure: Regenerate.
314 2009-11-22 Doug Evans <dje@sebabeach.org>
316 * cris/cpuall.h: Regenerate.
317 * cris/cpuv10.h: Regenerate.
318 * cris/cpuv32.h: Regenerate.
319 * cris/decodev10.c: Regenerate.
320 * cris/decodev10.h: Regenerate.
321 * cris/decodev32.c: Regenerate.
322 * cris/decodev32.h: Regenerate.
324 2009-11-12 Tristan Gingold <gingold@adacore.com>
326 * avr/interp.c (sim_write): Allow byte access.
329 2009-11-12 Tristan Gingold <gingold@adacore.com>
331 * avr/interp.c (sim_load): Clear memory before loading.
333 2009-11-09 Tristan Gingold <gingold@adacore.com>
335 * avr/interp.c (sim_resume): Fix typo for OP_ret.
337 2009-10-23 Doug Evans <dje@sebabeach.org>
339 * cris/arch.c: Regenerate.
340 * cris/arch.h: Regenerate.
341 * cris/cpuall.h: Regenerate.
342 * cris/cpuv10.c: Regenerate.
343 * cris/cpuv10.h: Regenerate.
344 * cris/cpuv32.c: Regenerate.
345 * cris/cpuv32.h: Regenerate.
346 * cris/cris-desc.c: Regenerate.
347 * cris/cris-desc.h: Regenerate.
348 * cris/cris-opc.h: Regenerate.
349 * cris/decodev10.c: Regenerate.
350 * cris/decodev10.h: Regenerate.
351 * cris/decodev32.c: Regenerate.
352 * cris/decodev32.h: Regenerate.
353 * cris/modelv10.c: Regenerate.
354 * cris/modelv32.c: Regenerate.
355 * cris/semcrisv10f-switch.c: Regenerate.
356 * cris/semcrisv32f-switch.c: Regenerate.
358 2009-10-22 Tristan Gingold <gingold@adacore.com>
360 * avr/interp.c (sim_stop): Return 1.
362 2009-10-16 Doug Evans <dje@sebabeach.org>
364 * MAINTAINERS: Add myself as m32r maintainer.
366 2009-10-15 Michael Egaer <eager@eagercon.com>
368 * MAINTAINERS: Add self as MicroBlaze maintainer.
370 2009-10-14 Ben Elliston <bje@gnu.org>
372 * MAINTAINERS (common): Move myself to "past maintainers" section.
374 2009-10-06 Michael Eager <eager@eagercon.com>
376 * microblaze/interp.c: Add include microblaze-dis.h.
378 2009-09-23 Michael Eager <eager@eagercon.com>
380 * configure: Add microblaze-*.* (not regenerated).
381 * configure.ac: Likewise.
382 * microblaze/config.in: New.
383 * microblaze/configure: Generate.
384 * microblaze/configure.ac: New.
385 * microblaze/interp.c: New.
386 * microblaze/Makefile.in: New.
387 * microblaze/microblaze.h: New.
388 * microblaze/microblaze.isa: New.
389 * microblaze/sim-main.h: New.
390 * microblaze/sysdep.h: New.
392 2009-08-22 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
394 * avr/config.in: Regenerate.
395 * avr/configure: Likewise.
396 * configure: Likewise.
397 * cris/config.in: Likewise.
398 * cris/configure: Likewise.
400 * configure.ac: m4_include toplevel config/override.m4.
401 * configure: Regenerate.
402 * avr/configure: Regenerate.
403 * cris/configure: Regenerate.
405 2009-07-30 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
407 * Makefile.in (datarootdir): New variable.
409 2009-05-18 Jon Beniston <jon@beniston.com>
411 * MAINTAINERS: Add Jon Beniston as maintainer of lm32 sim.
412 * configure.ac: Add lm32 target.
413 * lm32: New directory.
415 2009-05-11 Andrew Cagney <cagney@gnu.org>
417 * MAINTAINERS: Orphan ppc.
419 2009-05-08 Kevin Buettner <kevinb@redhat.com>
421 * m32c/gdb-if.c (m32c_signal_to_host): Rename to
422 m32c_signal_to_target. Change signal return values from SIGILL,
423 SIGTRAP, SIGSEGV, etc. to TARGET_SIGNAL_ILL, TARGET_SIGNAL_TRAP,
424 TARGET_SIGNAL_SEGV, etc. Fix all callers.
426 2009-04-30 Anthony Green <green@moxielogic.com>
428 * MAINTAINERS: Add myself for the moxie port.
429 * moxie: New directory.
430 * configure.ac: Add entry for moxie.
431 * configure: Regenerate.
433 2009-04-27 Tristan Gingold <gingold@adacore.com>
435 * avr: New directory.
436 * avr/interp.c, avr/Makefile.in, avr/configure.ac: New files.
437 * avr/config.in: New file, generated by autoheader.
438 * avr/configure: New file generated by autoconf.
439 * configure.ac: Add avr.
440 * configure: Regenerated.
442 2009-04-17 Carlos O'Donell <carlos@codesourcery.com>
444 * Makefile.in: Add dummy install-pdf, html, and
445 install-html targets.
447 2009-01-18 Hans-Peter Nilsson <hp@axis.com>
449 * cris/sim-if.c: Include errno.h.
450 (cris_start_address, cris_program_offset): New variables.
451 (OPTION_CRIS_PROGRAM_OFFSET, OPTION_CRIS_STARTADDR): New option
453 (cris_options): New options --cris-program-offset and
454 --cris-start-address.
455 (cris_option_handler): Handle new options.
456 (cris_program_offset_write, cris_set_section_offset_iterator)
457 (cris_offset_sections, cris_offset_sections): New functions.
458 (sim_load): Use cris_program_offset_write as function argument to
459 cris_load_elf_file, not sim_write.
460 (struct offsetinfo): New struct.
461 (cris_handle_interpreter): Fix typo in comment.
462 (sim_open): Call cris_offset_sections as soon as the bfd of the
463 infile is available. Gate bfd validity checks on abfd non-NULL.
464 (sim_create_inferior): Let cris_start_address when != -1 override
465 other start-address choices.
467 2009-01-06 Hans-Peter Nilsson <hp@axis.com>
469 * cris/traps.c (abort): Define to call sim_io_error.
470 (create_map): Make -1 imply a non-fixed address, not 0. All
471 callers changed. Only prefer the next higher unmapped address if
472 the last mapped address is no less than 0x40000000. Check that
473 the address to be mapped is not already mapped. Update head
475 (unmap_pages): Don't call abort when recursive call fails, just
476 note and return an error if a page in the range couldn't be unmapped.
477 (cris_bmod_handler, h_supr_set_handler, h_supr_get_handler)
478 (schedule, make_first_thread, cris_pipe_empty): New local variable sd.
479 (cris_break_13_handler) <case TARGET_SYS_mmap2>: Handle
480 non-MAP_FIXED argument overlapping existing map. For MAP_FIXED,
481 don't abort on page not being mapped. Handle non-anon filemap
482 with length padded to pagesize.
484 2009-01-03 Hans-Peter Nilsson <hp@axis.com>
486 * cris/sim-if.c (TARGET_AT_NULL, TARGET_AT_PHDR, TARGET_AT_PHENT)
487 (TARGET_AT_PHNUM, TARGET_AT_PAGESZ, TARGET_AT_BASE)
488 (TARGET_AT_FLAGS, TARGET_AT_ENTRY, TARGET_AT_UID, TARGET_AT_EUID)
489 (TARGET_AT_GID, TARGET_AT_EGID, TARGET_AT_HWCAP)
490 (TARGET_AT_CLKTCK): Remove redundant macros.
491 (AUX_ENT): Adjust to use standard ELF AT_* macros.
492 (AUX_ENTF): Ditto. Remove always-0 middle argument. Update all
494 (sim_open): Also pass AT_SECURE.
496 * cris/sim-main.h (struct _sim_cpu): New member
497 set_target_thread_data.
498 * cris/crisv32f.c (CRIS_TLS_REGISTER): Define.
499 * cris/crisv10f.c: Ditto.
500 * cris/cris-tmpl.c (MY (set_target_thread_data)): New function.
501 (MY (f_specific_init)): Set new _sim_cpu member to new function.
502 * cris/traps.c (TARGET_SYS_set_thread_area): Define.
503 (cris_break_13_handler) <case TARGET_SYS_set_thread_area>: New
506 * cris/traps.c (TARGET_SYS_exit_group): Define.
507 (cris_break_13_handler): Handle it like the exit for the last
510 * cris/traps.c (TARGET_UTSNAME): Update to 2009-01-01.
511 (TARGET_EPOCH): Update to match TARGET_UTSNAME. Correct comment.
512 (cris_break_13_handler) <case TARGET_SYS_uname>: Update to
513 2.6.27. Set machine field to the BFD printable name of the
516 * cris/traps.c (TARGET_MAP_DENYWRITE): Define.
517 (cris_break_13_handler) <case TARGET_SYS_mmap2>: Handle
518 TARGET_MAP_DENYWRITE.
520 * cris/traps.c (TARGET_SYS_access, TARGET_R_OK, TARGET_W_OK)
521 (TARGET_X_OK, TARGET_F_OK): Define.
522 (cris_break_13_handler) <case TARGET_SYS_access>: New case.
524 * cris/semcrisv32f-switch.c: Regenerate.
526 2008-12-30 Hans-Peter Nilsson <hp@axis.com>
528 * cris/sim-if.c (sim_open): If sim_analyze_program fails, emit
529 just a short CRIS-specific notice. Tweak the wording for a
530 failing architecture test.
532 * cris/traps.c (TARGET_SYS_writev): New macro.
533 (is_mapped_only, cris_dump_map): New functions.
534 (cris_break_13_handler) <case TARGET_SYS_mmap2>: Handle more flags
535 and prot combinations and a non-zero page-offset. If
536 TARGET_MAP_FIXED, unmap pages before mapping them.
537 <case TARGET_SYS_mprotect>: When checking, allow any length
538 argument. Don't actually do anything.
539 <case TARGET_SYS_writev>: New case.
541 * cris/Makefile.in (SIM_OBJS): Remove sim-hload.o.
542 * cris/sim-if.c: Include elf-bfd.h.
543 (struct progbounds): New members end_loadmem, start_nonloadmem.
544 (xprintf, eprintf): New functions, copied from common/sim-load.c.
545 (cris_load_elf_file, sim_load, cris_get_progbounds): New functions.
546 (get_progbounds_iterator): Renamed from get_progbounds. Make
547 static. Update head comment. Set new struct progbounds members.
548 (exec_load_addr, interp_load_addr, interp_start_addr): New static
550 (aux_ent_phdr, aux_ent_phent, aux_ent_phnum, aux_ent_base)
551 (aux_ent_entry, cris_write_interp, cris_handle_interpreter): New
553 (sim_open): New constant array auxv_entries. Rewrite AUX_ENT
554 handling to use auxv_entries. Improve error message and checking
555 for invalid programs. Use new variable abfd for the program
556 instead of for each access reaching into sd to get it.
557 (sim_create_inferior): If non-zero, use interp_start_addr instead
558 of the program start address.
559 (cris_disassemble_insn): Remove incorrect and unclear, supposedly
560 stale comment. Always specify little-endian.
562 2008-07-29 Nick Clifton <nickc@redhat.com>
564 * common/genmloop.sh: Add new parameter: -shell to specify the
565 command interpreter to use to run the input file. This is
566 necessary because otherwise SHELL is taken from the user's
567 environment, and not from the makefile that invoked this script
568 and the user might not be running an sh-like shell.
569 * cris/Makefile.in: Pass -shell parameter to genmloop.sh.
570 * fr30/Makefile.in: Likewise.
571 * frv/Makefile.in: Likewise.
572 * i960/Makefile.in: Likewise.
573 * iq2000/Makefile.in: Likewise.
574 * m32r/Makefile.in: Likewise.
576 * frv/mloop.in: Add missing start of line comment marker.
578 2008-07-11 Hans-Peter Nilsson <hp@axis.com>
580 * cris/configure: Regenerate to track ../common/common.m4 changes.
581 * cris/config.in: Ditto.
583 2008-06-06 Vladimir Prus <vladimir@codesourcery.com>
584 Daniel Jacobowitz <dan@codesourcery.com>
585 Joseph Myers <joseph@codesourcery.com>
587 * cris/configure: Regenerate.
589 2008-05-09 Olivier Hainque <hainque@adacore.com>
591 * ppc/altivec.igen (vperm): Latch inputs into temporaries.
593 2008-03-25 M R Swami Reddy <MR.Swami.Reddy@nsc.com>
595 * MAINTAINERS: Add myself as maintainer of cr16 port.
597 2008-02-12 M Ranga Swami Reddy <MR.Swami.Reddy@nsc.com>
599 Add simulator for National cr16 processor.
600 * cr16: New directory.
601 * configure.ac: Add entry for National cr16.
602 * configure: Regenerate.
604 2008-02-05 DJ Delorie <dj@redhat.com>
606 * configure.ac (v850): V850 now has a testsuite.
607 * configure (v850): Likewise.
609 2008-01-01 Daniel Jacobowitz <dan@codesourcery.com>
611 Updated copyright notices for most files.
613 2007-12-19 DJ Delorie <dj@redhat.com>
615 * frv/frv.c (frvbf_cut): Only look at the six LSBs of
618 2007-10-22 Hans-Peter Nilsson <hp@axis.com>
620 * cris/arch.c, cris/arch.h, cris/cpuall.h, cris/cpuv10.c,
621 cris/cpuv10.h, cris/cpuv32.c, cris/cpuv32.h, cris/cris-desc.c,
622 cris/cris-desc.h, cris/cris-opc.h, cris/decodev10.c,
623 cris/decodev10.h, cris/decodev32.c, cris/decodev32.h,
624 cris/modelv10.c, cris/modelv32.c, cris/semcrisv10f-switch.c,
625 cris/semcrisv32f-switch.c: Regenerate.
627 2007-08-24 Joel Brobecker <brobecker@adacore.com>
629 Switch the license of all files explicitly copyright the FSF
632 2007-03-27 Brooks Moses <brooks.moses@codesourcery.com>
634 * Makefile.in: Add dummy "pdf" target.
636 2007-02-20 Hans-Peter Nilsson <hp@axis.com>
638 * cris/traps.c (dump_statistics): Change format for cycle numbers
639 to %llu and cast parameters to unsigned long long.
641 2007-02-16 Thiemo Seufer <ths@mips.com>
643 * Makefile.in (FLAGS_TO_PASS, TARGET_FLAGS_TO_PASS): Add RUNTEST.
645 2007-01-28 Manuel Lauss <slauss@resi.at>
647 * configure.ac (sh64-*-*): Change to sh64*-*-*.
648 (sh-*-*): Change to sh*-*-*.
649 * configure: Regenerated.
651 2007-01-09 Daniel Jacobowitz <dan@codesourcery.com>
653 Updated copyright notices for most files.
655 2006-12-20 Hans-Peter Nilsson <hp@axis.com>
657 * Makefile.in (autoconf-common autoheader-common): Only run
658 autoheader on subdirs with a file config.in.
660 * configure.ac (common): Make the default "yes" for all targets
662 * configure: Regenerate.
664 * Makefile.in (autoconf-common autoheader-common): In documented
665 usage, say SHELL=/bin/sh.
666 (.PHONY): Add autoheader-common.
668 * MAINTAINERS: Add self as authorized committer for *.
670 2006-10-02 Edgar E. Iglesias <edgar@axis.com>
671 Hans-Peter Nilsson <hp@axis.com>
673 * cris/cris-sim.h (enum cris_unknown_syscall_action_type)
674 (cris_unknown_syscall_action): Declare.
675 * cris/sim-if.c (cris_unknown_syscall_action): Define.
676 (cris_options): Add cris-unknown-syscall option.
677 (cris_option_handler): Correct comment about and error message for
678 invalid --cris-cycles argument. Handle --cris-unknown-syscall.
679 * cris/traps.c: Include stdarg.h
680 (cris_unknown_syscall): New function.
681 (cris_break_13_handler): Instead of sim_io_eprintf and
682 sim_engine_halt, call cris_unknown_syscall to handle more or less
683 unknown syscalls. Adjust code as necessary to handle return
686 2006-09-30 Daniel Jacobowitz <dan@codesourcery.com>
688 * MAINTAINERS: Add Dave Brolley for sh64.
690 2006-09-30 Hans-Peter Nilsson <hp@axis.com>
692 * cris/traps.c (TARGET_PIPE_BUF): New macro.
693 (cris_pipe_empty): Correct initialization of "remaining". Only
694 adjust the "write" return value if more than TARGET_PIPE_BUF bytes
697 2006-09-29 Hans-Peter Nilsson <hp@axis.com>
699 * cris/configure.ac: Check for limits.h and sys/param.h.
700 * cris/configure, cris/config.in: Rebuild.
701 * cris/traps.c (SIM_PATHMAX): New macro.
702 (cris_break_13_handler): Use SIM_PATHMAX, not MAXPATHLEN.
704 2006-08-08 Joel Sherrill <joel.sherrill@oarcorp.com>
706 * configure.ac (sparc-*-rtems*|sparc-*-elf*): Enable erc32 simulator.
707 * Makefile.in (FLAGS_TO_PASS): Include libdir.
708 * configure: Regenerated.
710 2006-06-05 Daniel Jacobowitz <dan@codesourcery.com>
712 * cris/configure: Regenerated.
714 2006-05-31 Daniel Jacobowitz <dan@codesourcery.com>
716 * cris/configure: Regenerated.
718 2006-05-05 Andreas Schwab <schwab@suse.de>
720 * configure.ac (CFLAGS_FOR_BUILD): Set and substitute.
721 * configure: Regenerate.
723 * Makefile.in (CFLAGS_FOR_BUILD): Define.
724 (CC_FOR_BUILD): Don't override.
725 (FLAGS_TO_PASS): Pass CFLAGS_FOR_BUILD.
727 2006-05-04 Daniel Jacobowitz <dan@codesourcery.com>
729 * MAINTAINERS: Add an "Authorized committers" section, and list
732 2006-04-08 Hans-Peter Nilsson <hp@axis.com>
734 * cris/crisv32f.c (MY (deliver_interrupt)): Set CCS to new_ccs.
736 2006-04-03 Hans-Peter Nilsson <hp@axis.com>
738 * cris/dv-cris.c, cris/dv-rv.c, cris/rvdummy.c: New files.
739 * cris/Makefile.in (CONFIG_DEVICES): Remove redundant setting.
740 (dv-cris.o, dv-rv.o rvdummy$(EXEEXT), rvdummy.o): New rules.
741 (all): Depend on rvdummy$(EXEEXT).
742 * cris/configure.ac: Call SIM_AC_OPTION_WARNINGS. Check for
743 sys/socket.h and sys/select.h. Call SIM_AC_OPTION_HARDWARE,
745 * cris/configure: Regenerate.
746 * cris/cris-sim.h (cris_have_900000xxif): Declare here.
747 (enum cris_interrupt_type, crisv10deliver_interrupt)
748 (crisv32deliver_interrupt: New declarations.
749 * cris/cris-tmpl.c [WITH_HW] (MY (f_model_insn_after)): Call
750 sim_events_tickn and set state-events member work_pending when it's
751 time for the next event.
752 [WITH_HW] (MY (f_specific_init)): Set CPU-model-specific
753 interrupt-delivery function.
754 * cris/crisv10f.c (MY (deliver_interrupt)): New function.
755 * cris/crisv32f.c (MY (deliver_interrupt)): New function.
756 * cris/devices.c: Include hw-device.h.
757 (device_io_read_buffer) [WITH_HW]: Call hw_io_read_buffer.
758 (device_io_write_buffer): Only perform 0x900000xx-functions if
759 cris_have_900000xxif is nonzero. Else if WITH_HW defined,
760 call hw_io_write_buffer. Add return 0 last in function.
761 * cris/sim-if.c (cris_have_900000xxif): Now global.
762 (sim_open) [WITH_HW]: Clear deliver_interrupt cpu member.
763 Force "-model" option, effectively.
764 * cris/sim-main.h (cris_interrupt_delivery_fn): New type.
765 (struct _sim_cpu) [WITH_HW]: New member deliver_interrupt.
767 2006-04-02 Hans-Peter Nilsson <hp@axis.com>
769 * cris/Makefile.in (CRISV10F_OBJS): Remove semcrisv10f-switch.o.
770 (CRISV32F_OBJS): Remove semcrisv32f-switch.o.
771 (semcrisv10f-switch.o, semcrisv32f-switch.o: Remove dependency rules.
773 2006-03-13 DJ Delorie <dj@redhat.com>
775 * MAINTAINERS: Add self as m32c sim maintainer.
777 2006-02-23 Hans-Peter Nilsson <hp@axis.com>
779 * cris/traps.c (syscall_map): Remove CB_SYS_time / TARGET_SYS_time
781 (cris_break_13_handler) <case TARGET_SYS_time>: New case.
783 2006-01-23 Jim Blandy <jimb@redhat.com>
785 Add simulator for Renesas M32C and M16C.
787 * m32c: New directory.
788 * configure.ac: Add entry for Renesas M32C.
789 * configure: Regenerate.
791 2006-01-10 Hans-Peter Nilsson <hp@axis.com>
793 * cris/cris-tmpl.c (MY (f_model_insn_before)): Only display basic
794 cycle count for the current insn.
796 2005-12-06 Hans-Peter Nilsson <hp@axis.com>
798 * cris/cpuv10.h, cris/cpuv32.h, cris/cris-desc.c, cris/cris-opc.h,
799 cris/decodev10.c, cris/decodev10.h, cris/decodev32.c,
800 cris/decodev32.h, cris/modelv10.c, cris/modelv32.c,
801 cris/semcrisv10f-switch.c, cris/semcrisv32f-switch.c: Regenerate.
803 2005-12-05 Hans-Peter Nilsson <hp@axis.com>
805 * cris/arch.c, cris/arch.h, cris/cpuall.h, cris/cpuv10.c,
806 cris/cpuv10.h, cris/cpuv32.c, cris/cpuv32.h, cris/cris-desc.c,
807 cris/cris-desc.h, cris/cris-opc.h, cris/decodev10.c,
808 cris/decodev10.h, cris/decodev32.c, cris/decodev32.h,
809 cris/modelv10.c, cris/modelv32.c, cris/semcrisv10f-switch.c,
810 cris/semcrisv32f-switch.c: Regenerate.
812 2005-11-20 Hans-Peter Nilsson <hp@axis.com>
814 * cris/traps.c (TARGET_O_RDONLY, TARGET_O_WRONLY): Define.
815 (open_map): Use TARGET_O_ACCMODE, TARGET_O_RDONLY and
817 (cris_break_13_handler) <case TARGET_SYS_fcntl>: Add support for
818 F_GETFL on fd 0, 1 and 2.
820 2005-11-17 Hans-Peter Nilsson <hp@axis.com>
822 * cris/sim-main.h (struct _sim_cpu): New members last_syscall,
823 last_open_fd, last_open_flags.
824 * cris/traps.c: Don't include targ-vals.h.
825 (TARGET_O_ACCMODE): Define.
826 (cris_break_13_handler): Set new _sim_cpu members.
827 <case TARGET_SYS_fcntl>: Support special case of F_GETFL.
828 Rearrange code as switch. Emit "unimplemented" abort for
829 unimplemented fcntl calls.
831 * cris/traps.c (TARGET_SYS_stat): Define.
832 (syscall_stat32_map): Add entry for TARGET_SYS_stat.
833 (cris_break_13_handler) <case TARGET_SYS_stat>: New case.
835 2005-11-16 Hans-Peter Nilsson <hp@axis.com>
837 * cris/cris-tmpl.c (MY (f_model_insn_before)): Make sure only the
838 low 32 bits are used after an unsigned long cast.
840 2005-05-28 Hans-Peter Nilsson <hp@axis.com>
842 * cris/Makefile.in (stamp-v32fmloop): Depend on stamp-v10fmloop.
844 2005-05-26 Chris Demetriou <cgd@netbsd.org>
846 * MAINTAINERS: Update my mail address, move myself to the
847 "Past maintainers" section.
849 2005-05-17 Corinna Vinschen <vinschen@redhat.com>
851 * configure.ac: Add igen to v850 build.
852 * configure: Regenerate.
854 2005-04-29 Paul Brook <paul@codesourcery.com>
856 * common/callback.c (PIPE_BUF): Provide default definition.
857 (os_lstat): Use stat if lstat is not available on the host.
858 (os_ftruncate): Return EINVAL if not available on the host.
859 (os_truncate): Ditto.
860 * common/configure.ac: Check for lstat, truncate and ftruncate.
861 * common/configure: Regenerate.
862 * common/config.in: Regenerate.
864 2005-04-27 Paul Brook <paul@codesourcery.com>
866 * common/Make-common.in: Add $(EXEEXT) to "run".
868 2005-04-18 Hans-Peter Nilsson <hp@axis.com>
870 * cris/traps.c (cris_break_13_handler) <case TARGET_SYS_mmap2>:
871 For ((len & 8191) != 0 && fd == (USI) -1), don't say this isn't
872 implemented. In call to create_map, pad length argument to 8k.
874 2005-04-15 Corinna Vinschen <vinschen@redhat.com>
876 * configure.ac: Add explicit sh64 case.
877 * configure: Regenerate.
879 2005-03-30 Paul Brook <paul@codesourcery.com>
881 * arm/wrapper.c: Provide SIGTRAP and SIGBUS.
883 2005-03-24 Hans-Peter Nilsson <hp@axis.com>
885 * cris/Makefile.in (stamp-v10fcpu, stamp-v32fcpu): Add kludge to
886 include cgen-ops.h in decodev10.c and decodev32.c.
887 * cris/sim-main.h: Don't include cgen-ops.h here.
888 * cris/arch.c, cris/arch.h, cris/cpuall.h, cris/cpuv10.c,
889 cris/cpuv10.h, cris/cpuv32.c, cris/cpuv32.h, cris/cris-desc.c,
890 cris/cris-desc.h, cris/cris-opc.h, cris/decodev10.c,
891 cris/decodev10.h, cris/decodev32.c, cris/decodev32.h,
892 cris/modelv10.c, cris/modelv32.c, cris/semcrisv10f-switch.c,
893 cris/semcrisv32f-switch.c: Regenerate.
895 * cris/traps.c (cris_break_13_handler) <case
896 TARGET_SYS_rt_sigaction>: Rename sa_handler, sa_flags,
897 sa_restorer, sa_mask_low, sa_mask_high to target_sa_handler etc.
899 2005-03-23 Mark Kettenis <kettenis@gnu.org>
901 * cris/configure: Regenerate.
903 2005-02-28 Jim Blandy <jimb@redhat.com>
905 * d10v/configure.ac, igen/configure.ac, m68hc11/configure.ac,
906 mips/configure.ac, mn10300/configure.ac, v850/configure.ac:
907 Regenerated, after change to common/aclocal.m4.
909 2005-02-18 Corinna Vinschen <vinschen@redhat.com>
911 * iq2000: New target subdirectory.
912 * configure.ac: Add iq2000 target.
913 * configure: Regenerate.
915 2005-01-29 Hans-Peter Nilsson <hp@axis.com>
917 * Makefile.in (all, clean mostlyclean, distclean maintainer-clean)
918 (realclean, install): Fail if subdir make failed.
920 2005-01-28 Hans-Peter Nilsson <hp@axis.com>
922 * cris: New directory, simulator for Axis Communications CRIS
923 including CRIS v32, CGEN-based.
924 * configure.ac: Add corresponding configury.
925 * configure: Regenerate.
927 2005-01-17 Andrew Cagney <cagney@gnu.org>
929 * configure.ac: For mips*-*-* and mn10300*-*-* configure the
930 common directory. Remove sparc*-*-* from list.
932 2005-01-11 Andrew Cagney <cagney@gnu.org>
934 * Makefile.in (autoconf-common autoheader-common): Add --force to
935 autoconf and autoheader.
936 (autoconf-common autoheader-common)
937 (autoconf-install autoheader-install): Check for configure.ac, not
939 * configure.ac: Delete AC_CONFIG_AUX_DIR.
940 * configure: Re-generate.
942 2005-01-07 Andrew Cagney <cagney@gnu.org>
944 * configure.ac: Replace configure.in. Requires autoconf 2.59 and
945 correctly calls AC_CONFIG_SUBDIRS.
946 * configure: Re-generate.
948 2004-12-01 Andrew Cagney <cagney@gnu.org>
950 * i960, h8500: Delete directory.
952 2004-11-12 Andrew Cagney <cagney@gnu.org>
954 * d30v, fr30, mn10200, z8k: Delete directory.
956 2004-03-10 Ben Elliston <bje@gnu.org>
958 * MAINTAINERS: Update my mail address.
960 2004-01-26 Chris Demetriou <cgd@broadcom.com>
962 * configure.in (mips*-*-*): Configure in testsuite.
963 * configure: Regenerate.
965 2003-10-08 Dave Brolley <brolley@redhat.com>
967 * configure.in: Move frv handling to alphabetically correct placement.
969 2003-09-03 Andreas Schwab <schwab@suse.de>
971 * Makefile.in (FLAGS_TO_PASS): Pass down $(bindir) and $(mandir).
973 2003-08-29 Dave Brolley <brolley@redhat.com>
975 * MAINTAINERS: Add myself as maintainer of the FRV port.
977 2003-08-20 Michael Snyder <msnyder@redhat.com>
978 Dave Brolley <brolley@redhat.com>
980 * frv/: New directory, simulator for the Fujitsu FRV.
981 * configure.in: Add frv configury.
982 * configure: Regenerate.
984 2003-08-10 Ben Elliston <bje@wasabisystems.com>
986 * MAINTAINERS: Update my mail address.
988 2003-08-09 Andrew Cagney <cagney@redhat.com>
990 * MAINTAINERS: Andrew Cagney (mips) and Geoff Keating (ppc) drop
991 maintenance. List igen and sh maintainers. Mention that target
992 and global maintainers pick up the slack.
994 2003-07-09 Michael Snyder <msnyder@redhat.com>
996 * configure.in: Add testsuite to extra_subdirs for sh.
997 * configure: Regenerate.
999 2003-01-23 Nick Clifton <nickc@redhat.com>
1003 2002-04-02 Alexandre Oliva <aoliva@redhat.com>
1005 * sh/gencode.c: Replace sh3e with sh2e except in fsqrt.
1007 2002-08-24 Geoffrey Keating <geoffk@redhat.com>
1009 * MAINTAINERS: Update my email address.
1011 2002-07-17 Andrew Cagney <ac131313@redhat.com>
1013 * w65/: Delete directory.
1015 2002-07-16 Andrew Cagney <ac131313@redhat.com>
1017 * configure.in (extra_subdirs): Mark fr30-*-* as obsolete.
1018 * configure: Re-generate.
1020 2002-07-13 Andrew Cagney <ac131313@redhat.com>
1022 * configure.in (extra_subdirs): Mark d30v-*-* as obsolete.
1023 * configure: Re-generate.
1025 2002-06-16 Andrew Cagney <ac131313@redhat.com>
1027 * Makefile.in (autoconf-changelog autoheader-changelog): Let name,
1028 id, date and host to be overriden by NAME, ID, DATE and HOST
1029 respectfully. Use ISO dates.
1031 Thu Jun 6 12:34:13 2002 Andrew Cagney <cagney@redhat.com>
1033 * Makefile.in (ChangeLog): New makefile variable.
1034 * README-HACKING: Mention the ChangeLog makefile variable.
1036 2002-06-01 Andrew Cagney <ac131313@redhat.com>
1038 * tic80/: Delete directory.
1040 2002-05-16 Stephane Carrez <stcarrez@nerim.fr>
1042 * MAINTAINERS: Update my email address.
1044 2002-03-06 Stephane Carrez <Stephane.Carrez@worldnet.fr>
1046 * MAINTAINERS: Record self as maintainer of m68hc11 simulator.
1048 2002-03-01 Frank Ch. Eigler <fche@redhat.com>
1050 * MAINTAINERS: Record self as a co-maintainer of just common/.
1052 2002-02-07 Nick Clifton <nickc@cambridge.redhat.com>
1054 * MAINTAINERS: Point to GDB files describing overall maintaince
1055 and check-in procedures.
1057 2002-01-10 Nick Clifton <nickc@cambridge.redhat.com>
1059 * MAINTAINERS: Add myself for ARM portions.
1061 2001-10-19 Andrew Cagney <ac131313@redhat.com>
1063 * configure.in: When Linux or NetBSD, enable PowerPC simulator.
1064 * configure: Re-generate.
1066 2001-02-16 Ben Elliston <bje@redhat.com>
1068 * MAINTAINERS: Add myself for common portions.
1070 2001-01-15 Chris Demetriou <cgd@broadcom.com>
1072 * MAINTAINERS: Added self and Andrew for the mips sim.
1074 2000-10-25 Geoff Keating <geoffk@cygnus.com>
1076 * MAINTAINERS: Added self and Andrew for the ppc sim.
1078 Thu Jul 27 21:26:26 2000 Andrew Cagney <cagney@b1.cygnus.com>
1080 From Stephane Carrez <Stephane.Carrez@worldnet.fr>:
1081 * m68hc11: New directory.
1082 * configure.in: Add.
1083 * configure: Regenerate.
1085 Tue Jul 4 13:43:54 2000 Andrew Cagney <cagney@b1.cygnus.com>
1087 * tic80: New directory.
1088 * configure.in: Add configury.
1089 * configure: Regenerate.
1091 2000-04-20 Nick Clifton <nickc@cygnus.com>
1093 * configure.in (extra_subdirs): Add testsuite to strongarm
1095 * configure: Regenerate.
1097 Sat Mar 4 16:48:54 2000 Andrew Cagney <cagney@b1.cygnus.com>
1099 * MAINTAINERS: New file. Blank.
1101 1999-11-18 Ben Elliston <bje@cygnus.com>
1103 * configure.in: Require autoconf 2.13 and remove obsolete
1104 invocation of AC_C_CROSS.
1105 * configure: Regenerate.
1107 1999-09-29 Doug Evans <devans@casey.cygnus.com>
1109 * configure.in: Configure the testsuite directory for thumb.
1110 * configure: Regenerate.
1112 1999-07-16 Ben Elliston <bje@cygnus.com>
1114 * configure.in: Configure the testsuite directory for arm.
1115 * configure: Regenerate.
1117 1999-04-08 Nick Clifton <nickc@cygnus.com>
1119 * configure.in: Add support for MCore target.
1120 * configure: Regenerate.
1122 1999-03-14 Stan Shebs <shebs@andros.cygnus.com>
1124 * Makefile.in (FLAGS_TO_PASS, TARGET_FLAGS_TO_PASS): Remove
1125 RUNTEST instead of commenting out, fixes portability problem.
1127 1999-02-08 Nick Clifton <nickc@cygnus.com>
1129 * configure.in: Add support for StrongARM target.
1130 * configure: Regenerate.
1132 1999-01-04 Jason Molenda (jsm@bugshack.cygnus.com)
1134 * configure.in: Require autoconf 2.12.1 or higher.
1136 1998-12-08 James E Wilson <wilson@wilson-pc.cygnus.com>
1138 * configure.in (i960-*-*): Add.
1139 * configure: Rebuild.
1141 Wed Nov 4 19:11:43 1998 Dave Brolley <brolley@cygnus.com>
1143 * configure.in: Added case for fr30-*-*.
1144 * configure: Regenerated.
1146 Fri Sep 25 10:12:19 1998 Christopher Faylor <cgf@cygnus.com>
1148 * ppc/Makefile.in: Add EXEEXT to installed powerpc-eabi-run program
1149 to allow successful operation on Windows.
1151 Thu May 28 14:59:46 1998 Jillian Ye <jillian@cygnus.com>
1153 * Makefile.in: Take RUNTEST out of FLAGS_TO_PASS so that make
1154 check can be invoked recursively.
1156 Wed Apr 29 12:38:53 1998 Mark Alexander <marka@cygnus.com>
1158 * configure.in: Build simulator on sparclite and sparc86x targets.
1159 * configure: Regenerate.
1161 Sun Apr 26 15:21:01 1998 Tom Tromey <tromey@cygnus.com>
1163 * Makefile.in (autoconf-common autoheader-common): Don't pass -l
1164 to autoconf and autoheader.
1166 Fri Apr 24 11:14:13 1998 Tom Tromey <tromey@cygnus.com>
1168 * Makefile.in (autoconf-common autoheader-common): Pass `-l
1169 ../common' to autoconf and autoheader. Unconditionally run
1170 autoconf in every subdir.
1171 (autoconf-changelog autoheader-changelog): Unconditionally run
1172 commands in every subdir.
1173 (autoconf-install autoheader-install): Likewise.
1175 Tue Mar 24 17:12:43 1998 Stu Grossman <grossman@bhuna.cygnus.co.uk>
1177 * Makefile.in: Get SHELL from configure.
1178 * (FLAGS_TO_PASS): Pass down SHELL.
1179 * configure: Regenerate with autoconf 2.12.1 to fix shell issues for
1182 Tue Mar 24 11::18:00 1998 Joyce Janczyn <janczyn@cygnus.com>
1184 * configure.in (extra_subdirs): Enable igen for mn10300.
1185 * configure: Re-generate.
1187 Tue Dec 2 10:10:42 1997 Nick Clifton <nickc@cygnus.com>
1189 * configure.in (extra_subdirs): Add support for thumb target.
1191 * configure (extra_subdirs): Add support for thumb target.
1193 Wed Oct 8 12:38:48 1997 Andrew Cagney <cagney@b1.cygnus.com>
1195 * configure.in (extra_subdirs): Add IGEN directory when MIPS
1197 * configure: Regenerate.
1199 Fri Sep 12 13:10:31 1997 Andrew Cagney <cagney@b1.cygnus.com>
1201 * configure.in (extra_subdirs): v850ea needs igen.
1202 * configure: Re-generate.
1204 Mon Sep 1 16:48:23 1997 Andrew Cagney <cagney@b1.cygnus.com>
1206 * configure.in (testdir): When a testsuite directory, add that to
1207 the list of confdirs.
1209 Tue Aug 19 11:17:46 1997 Andrew Cagney <cagney@b1.cygnus.com>
1211 * configure.in (extra_subdirs): Enable igen ready for V850.
1213 Tue Aug 26 15:14:48 1997 Andrew Cagney <cagney@b1.cygnus.com>
1215 * configure.in (w65-*-*, only_if_enabled): Set.
1216 * configure: Re-generate.
1218 Mon Aug 25 16:26:53 1997 Andrew Cagney <cagney@b1.cygnus.com>
1220 * configure.in (sparc*-*-*, only_if_enabled): Set
1221 only_if_enabled=yes. Check only_if_enabled before enabling a
1223 * configure: Regenerate.
1225 Mon Aug 18 10:56:59 1997 Nick Clifton <nickc@cygnus.com>
1227 * configure.in (extra_subdirs): Add v850e target.
1229 Mon Aug 18 10:56:59 1997 Nick Clifton <nickc@cygnus.com>
1231 * configure.in (extra_subdirs): Add v850ea target.
1233 Fri Jul 25 11:40:47 1997 Doug Evans <dje@canuck.cygnus.com>
1235 * configure.in (sparc*-*-*): Don't build erc32.
1236 * configure: Regenerate.
1238 Thu Apr 24 00:47:20 1997 Doug Evans <dje@canuck.cygnus.com>
1240 * configure.in (m32r-*-*): New target.
1241 * configure: Regenerate.
1243 * Makefile.in (autoconf-common, autoconf-changelog): Change $* to $@.
1245 Mon Apr 21 22:57:55 1997 Andrew Cagney <cagney@b1.cygnus.com>
1247 * Makefile.in (.NOEXPORT, MAKEOVERRIDES): Moved to end, BSD make
1248 thought that .NOEXPORT was the default target.
1250 Fri Apr 11 17:18:07 1997 Ian Lance Taylor <ian@cygnus.com>
1252 * Makefile.in (clean mostlyclean): Restore targets accidentally
1253 deleted in earlier change.
1255 Thu Apr 3 12:20:32 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
1257 * Makefile.in (autoheader-common, autoheader-changelog,
1258 autoheader-install): Perform autoheader in addition to autoconf.
1260 Wed Apr 2 15:09:05 1997 Doug Evans <dje@canuck.cygnus.com>
1262 * Makefile.in (autoconf-install): New target.
1263 (autoconf-changelog): Try different way to obtain user name.
1265 Wed Apr 2 14:25:52 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
1267 * Makefile.in (autoconf-changelog): New target, update
1268 ChangeLog for all subdirectories - normally used after
1269 autoconf-common target.
1271 Wed Mar 19 14:26:21 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
1273 * configure.in (extra_subdirs): Include testsuite for d30v.
1274 * configure: Regenerate.
1276 * Makefile.in (RUNTEST, RUNTESTFLAGS): Borrow test rules from
1278 (check): New rules - drive the testsuite.
1280 Mon Mar 3 13:01:00 1997 Jeffrey A Law (law@cygnus.com)
1282 * configure.in: Add mn10200 configure lines accidentally
1284 * configure: Regenerated.
1286 Wed Feb 19 10:34:20 1997 Andrew Cagney <cagney@critters.cygnus.com>
1288 * configure.in (extra_subdirs): Generalize common sub directory
1290 (extra_subdirs): For d30v add igen to the list to be built.
1292 Sun Feb 16 16:37:47 1997 Andrew Cagney <cagney@critters.cygnus.com>
1294 * configure.in (d30v): New target.
1295 * configure: Regenerated.
1297 Wed Feb 19 23:17:13 1997 Jeffrey A Law (law@cygnus.com)
1299 * configure.in: Don't require GCC to build the mn10200
1301 * configure: Rebuilt.
1303 Wed Feb 5 13:28:13 1997 Doug Evans <dje@canuck.cygnus.com>
1305 * configure.in: Don't configure any subdirs if no simulator
1306 is being built. Don't use erc32 for sparc64.
1307 * configure: Regenerated.
1309 Tue Feb 4 13:19:39 1997 Doug Evans <dje@canuck.cygnus.com>
1311 * Makefile.in (autoconf-common): New target.
1312 * configure.in: Do configure common.
1313 * configure: Regenerated.
1315 Thu Jan 23 13:59:52 1997 Stu Grossman (grossman@critters.cygnus.com)
1317 * configure configure.in: Don't configure common anymore. Files
1318 from common are now built in the individual simualtor directories.
1319 This fixes problems with the WinGDB build procedure.
1321 Mon Jan 13 13:16:42 1997 Jeffrey A Law (law@cygnus.com)
1323 * configure: Enable the mn10200 simulator.
1325 Wed Nov 20 01:00:36 1996 Doug Evans <dje@canuck.cygnus.com>
1327 * configure.in (configdirs): Add common.
1328 * configure: Regenerated.
1330 Fri Nov 1 08:03:30 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1332 * configure.in (powerpc*-*-linux*): Treat like the other powerpc
1333 system V based targets.
1334 * configure: Regenerate.
1336 Thu Oct 17 12:50:08 1996 Doug Evans <dje@canuck.cygnus.com>
1338 * configure.in (--enable-sim-powerpc): Delete.
1339 (--enable-sim): Add.
1340 * configure: Regenerated.
1342 Fri Oct 11 21:13:43 1996 Jeffrey A Law (law@cygnus.com)
1344 * configure.in: Only build the V850 simulator if
1346 * configure: Rebuild.
1348 Sun Sep 8 17:22:50 1996 Ian Lance Taylor <ian@cygnus.com>
1350 * configure.in: Do build erc32 for DOS and Windows hosts.
1351 * configure: Rebuild.
1353 Wed Sep 4 18:11:27 1996 Stu Grossman (grossman@critters.cygnus.com)
1355 * Makefile.in erc32/Makefile.in: Don't set srcroot. This should
1356 be inherited from the parent. Remove INSTALL_XFORM and
1357 INSTALL_XFORM1. Make INSTALL be set from configure.
1359 Wed Sep 4 15:49:16 1996 Ian Lance Taylor <ian@cygnus.com>
1361 * configure.in: Only build the MIPS simulator if we are using
1363 * configure: Rebuild.
1365 Wed Aug 28 19:05:23 1996 Jeffrey A Law (law@cygnus.com)
1367 * configure.in (v850-*-*): Added V850 simulator.
1369 Thu Aug 1 17:08:41 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1371 * configure.in (d10v-*-*): Added D10V simulator.
1373 Wed Jun 26 12:33:57 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
1375 * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir,
1376 INSTALL_PROGRAM, INSTALL_DATA): Use autoconf-set values.
1378 * configure.in (AC_PREREQ): autoconf 2.5 or higher.
1379 (AC_PROG_INSTALL): Added.
1380 * configure: Rebuilt.
1382 Mon Jun 24 14:18:26 1996 Ian Lance Taylor <ian@cygnus.com>
1384 * configure.in: Only configure erc32 if using gcc.
1385 * configure: Rebuild.
1387 Tue Jun 4 09:24:21 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1389 * configure.in (sim_target): Build PowerPC simulator for powerpc
1390 System V.4, Solaris, and Elf targets.
1391 * configure: Regenerate with autoconf 2.10.
1393 Wed May 22 12:10:49 1996 Rob Savoye <rob@chinadoll>
1395 * configure.in: Only built erc32 simulator on Unix hosts as it
1397 * configure: Regenerated with autoconf 2.8.
1399 Sun May 19 20:20:40 1996 Rob Savoye <rob@chinadoll.cygnus.com>
1401 * erc32: Sparc simulator from the ESA.
1403 Sun Apr 7 21:00:09 1996 Fred Fish <fnf@cygnus.com>
1405 From: Miles Bader <miles@gnu.ai.mit.edu>
1406 * configure.in: Use AC_CHECK_TOOL to find AR & RANLIB.
1407 * configure: Regenerate using autoconf.
1409 Thu Feb 22 11:31:50 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1411 * Makefile.in (install): Fix typo.
1413 Wed Feb 21 11:59:57 1996 Ian Lance Taylor <ian@cygnus.com>
1415 * configure: Regenerate with autoconf 2.7.
1417 * Makefile.in (all): Simplify.
1418 (clean, mostlyclean): SUBDIRS may contain whitespace; fix the loop
1419 as in the all target.
1420 (distclean, maintainer-clean, realclean): Likewise.
1421 (install): Likewise.
1423 Thu Feb 15 18:37:00 1996 Fred Fish <fnf@cygnus.com>
1425 * Makefile.in (all): Remove extra '\' char from shell script.
1427 Wed Feb 14 16:43:59 1996 Mike Meissner <meissner@tiktok.cygnus.com>
1429 * Makefile.in (all): Avoid a for loop with zero elements, even if
1430 the loop will not be executed because of an if statement.
1432 Wed Jan 31 21:48:34 1996 Fred Fish <fnf@cygnus.com>
1434 * Makefile.in (install): Add missing semicolon in "fi \".
1436 Thu Nov 9 16:10:56 1995 Michael Meissner <meissner@tiktok.cygnus.com>
1438 * Makefile.in (AR, CC, CFLAGS, CC_FOR_BUILD, RANLIB): Pick up
1439 defaults from configure.
1441 * configure.in: Pick up AR, CC, CFLAGS, CC_FOR_BUILD, RANLIB using
1443 (powerpc*-*-eabi*): Build simulator for all powerpc eabi targets
1444 if either --enable-sim-powerpc is used, or the host compiler is
1447 Wed Nov 8 15:46:49 1995 James G. Smith <jsmith@pasanda.cygnus.co.uk>
1449 * configure.in (mips*-*-*): Added "mips" simulator target.
1450 * configure: Re-generated.
1452 Tue Oct 10 11:08:20 1995 Fred Fish <fnf@cygnus.com>
1454 * Makefile.in (BISON): Remove macro.
1455 (FLAGS_TO_PASS): Remove BISON.
1457 Sun Oct 8 04:26:27 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1459 * configure.in: Explicitly `exit 0' for broken shells.
1460 * configure: Rebuilt.
1462 Fri Oct 6 12:03:27 1995 Jim Wilson <wilson@chestnut.cygnus.com>
1464 * common/run.c (main): Initialize the callbacks.
1466 Wed Sep 20 13:34:50 1995 Ian Lance Taylor <ian@cygnus.com>
1468 * Makefile.in (maintainer-clean): New synonym for realclean.
1470 Fri Aug 25 11:53:43 1995 Michael Meissner <meissner@tiktok.cygnus.com>
1472 * configure.in (powerpc*-*-eabisim*): Only build the simulator if
1473 the target is powerpc*-*-eabisim*, since it requires GCC to build.
1475 Mon Aug 21 17:53:48 1995 Michael Meissner <meissner@tiktok.cygnus.com>
1477 * configure.in (powerpc{,le}-*-*): Add psim from Andrew Cagney
1478 <cagney@highland.com.au>.
1479 * configure: Regnerate from configure.in.
1481 Thu Aug 3 10:45:37 1995 Fred Fish <fnf@cygnus.com>
1483 * Update all FSF addresses except those in COPYING* files.
1485 Thu Jul 20 15:17:29 1995 Fred Fish <fnf@cygnus.com>
1487 * Makefile.in (CC_FOR_BUILD): Define default and arrange to pass
1488 submakes either default or passed in value.
1490 Wed Jul 5 14:32:54 1995 J.T. Conklin <jtc@rtl.cygnus.com>
1492 * Makefile.in (all, clean, distclean, mostlyclean, realclean,
1493 install): Changed targets so that they descend all
1494 subdirectories in $(SUBDIRS).
1495 (*-all, *-clean, *-install): Removed targets.
1497 * configure.in: Don't bother with target makefile fragments, they
1498 are no longer needed.
1499 * configure: regenerated.
1501 * Makefile.in, configure.in: converted to autoconf.
1502 * configure: New file, generated with autconf 2.4.
1504 Wed May 24 14:48:46 1995 Steve Chamberlain <sac@slash.cygnus.com>
1506 * Makefile.in: Support ARM.
1507 * configure.in: Ditto.
1509 Sun Jan 15 16:53:47 1995 Steve Chamberlain <sac@splat>
1511 * Makefile.in: Support W65.
1512 * configure.in: Ditto.
1514 Sun Mar 13 09:27:50 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
1516 * Makefile.in: Add TAGS target.
1518 Mon Sep 13 12:47:15 1993 K. Richard Pixley (rich@sendai.cygnus.com)
1520 * Makefile.in (all-z8k, install-z8k, clean-z8k, all-h8300,
1521 install-h8300, clean-h8300, all-h8500, install-h8500,
1522 clean-h8500, all-sh, install-sh, clean-sh): do not echo
1525 Wed Jun 30 14:12:05 1993 david d `zoo' zuhn (zoo at poseidon.cygnus.com)
1527 * Makefile.in: remove endian.h trace from h8500
1529 Sun Jun 13 13:08:58 1993 Jim Kingdon (kingdon@cygnus.com)
1531 * Makefile.in: Add distclean, realclean, and mostlyclean targets.
1533 Fri May 21 11:21:16 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
1535 * Makefile.in: make all of the all-* target (except all-nothing)
1536 depend on endian.h, so that if we're not building a simulator, we
1539 Fri May 21 10:55:06 1993 Ian Lance Taylor (ian@cygnus.com)
1541 * Makefile.in (check, installcheck): Added dummy targets.
1543 Mon May 3 21:39:43 1993 Fred Fish (fnf@cygnus.com)
1545 * Makefile.in (endian): Find endian.c in $(srcdir), and also
1546 explicitly make it, since some makes apparently don't work with
1547 VPATH and .c to executable rules (SunOS make for example).
1549 Mon May 3 08:29:01 1993 Steve Chamberlain (sac@thepub.cygnus.com)
1551 * Makefile.in (endian): Add explicit rule for broken makes.
1553 Mon Mar 15 15:47:53 1993 Ian Lance Taylor (ian@cygnus.com)
1555 * Makefile.in (info, install-info): New targets.
1556 (DO_INSTALL): Renamed from INSTALL, which is overridden by the top
1559 Wed Feb 10 20:12:27 1993 K. Richard Pixley (rich@ok.cygnus.com)
1561 * Makefile.in (endian.h): build endian.h via a temporary file so
1562 that we don't leave an incomplete file lying around on
1564 (clean): remove endian, e.h, and endian.h.
1566 Mon Feb 8 11:46:06 1993 Steve Chamberlain (sac@thepub.cygnus.com)
1568 * Makefile.in, configure.in: if target isn't supported, build a