1 2013-04-19 Nathan Froyd <froydnj@codesourcery.com>
3 * ppc-instructions (isel): New instruction.
5 2013-03-15 Steve Ellcey <sellcey@mips.com>
7 * arm/wrapper.c (sim_complete_command): Make char arguments const.
8 * avr/interp.c (sim_complete_command): Ditto.
9 * common/sim-options.c (sim_complete_command): Ditto.
10 * cr16/interp.c (sim_complete_command): Ditto.
11 * erc32/interf.c (sim_complete_command): Ditto.
12 * m32c/gdb-if.c (sim_complete_command): Ditto.
13 * microblaze/interp.c (sim_complete_command): Ditto.
14 * ppc/sim_calls.c (sim_complete_command): Ditto.
15 * rl78/gdb-if.c (sim_complete_command): Ditto.
16 * rx/gdb-if.c (sim_complete_command): Ditto.
17 * sh/interp.c (sim_complete_command): Ditto.
19 2013-01-01 Joel Brobecker <brobecker@adacore.com>
21 Update year range in copyright notice of all files.
23 2012-12-19 Joel Brobecker <brobecker@adacore.com>
25 Update old contact info in GPL license notices.
27 2012-12-19 Joel Brobecker <brobecker@adacore.com>
29 Update the non-FSF-copyrighted files in sim to GPLv3 or later.
31 2012-11-20 Pavel Chupin <pavel.v.chupin@intel.com>
33 * common/Make-common.in: Use lt_cv_dlopen_libs under PLUGINS
35 * common/acinclude.m4: Define lt_cv_dlopen_libs.
36 * arm/configure: Regenerate.
37 * avr/configure: Regenerate.
38 * bfin/configure: Regenerate.
39 * common/configure: Regenerate.
40 * cr16/configure: Regenerate.
41 * cris/configure: Regenerate.
42 * d10v/configure: Regenerate.
43 * erc32/configure: Regenerate.
44 * frv/configure: Regenerate.
45 * h8300/configure: Regenerate.
46 * igen/configure: Regenerate.
47 * iq2000/configure: Regenerate.
48 * lm32/configure: Regenerate.
49 * m32c/configure: Regenerate.
50 * m32r/configure: Regenerate.
51 * m68hc11/configure: Regenerate.
52 * mcore/configure: Regenerate.
53 * microblaze/configure: Regenerate.
54 * mips/configure: Regenerate.
55 * mn10300/configure: Regenerate.
56 * moxie/configure: Regenerate.
57 * ppc/configure: Regenerate.
58 * rl78/configure: Regenerate.
59 * rx/configure: Regenerate.
60 * sh/configure: Regenerate.
61 * sh64/configure: Regenerate.
62 * testsuite/configure: Regenerate.
63 * v850/configure: Regenerate.
65 2012-11-05 Stephane Carrez <Stephane.Carrez@gmail.com>
67 * MAINTAINERS: Update my email address.
69 2012-09-24 Steve Ellcey <sellcey@mips.com>
71 * mips/basic.exp: Add mips*-mti-elf* target.
72 * configure.ac: Add mips*-mti-elf* target.
73 * configure: Regenerate.
75 2012-06-15 Joel Brobecker <brobecker@adacore.com>
77 * configure: Regenerate.
79 2012-06-06 Michael Eager <eager@eagercon.com>
81 * microblaze/interp.c (config.h): Add #include.
83 2011-11-29 Joel Brobecker <brobecker@adacore.com>
85 * MAINTAINERS (Global Maintainers): New section. Add Mike
88 2011-11-28 DJ Delorie <dj@redhat.com>
90 * configure.tgt: Add rl78 support.
91 * configure: Regenerate.
92 * rl78: New directory.
93 * MAINTAINERS: Add myself as RL78 maintainer.
95 2011-07-08 Hans-Peter Nilsson <hp@axis.com>
97 * MAINTAINERS: Remove Thiemo Seufer.
99 2011-06-04 Mike Frysinger <vapier@gentoo.org>
101 * configure.tgt (bfin-*-*): Add sim_testsuite=yes.
102 * configure: Regenerate.
104 2011-05-04 Joseph Myers <joseph@codesourcery.com>
106 * configure.tgt (thumb*-*-* | strongarm*-*-* | xscale-*-*): Don't
108 * configure: Regenerate.
110 2011-03-05 Mike Frysinger <vapier@gentoo.org>
112 * MAINTAINERS: Add bfin entry.
113 * configure.tgt (bfin-*-*): Handle bfin targets.
114 * configure: Regenerate.
116 2011-01-05 Mike Frysinger <vapier@gentoo.org>
118 * .gitignore: Add /*/hw-config.h.
120 2010-12-23 Mike Frysinger <vapier@gentoo.org>
122 * .gitignore: New file.
124 2010-07-28 DJ Delorie <dj@redhat.com>
126 * MAINTAINERS: Add self as RX maintainer. Sort list.
128 2010-06-08 Nick Clifton <nickc@redhat.com>
130 * reg.c (set_oszc): Use unsigned int for the mask.
131 (set_szc, set_osz, set_sz): Likewise.
133 2010-04-26 Mike Frysinger <vapier@gentoo.org>
135 * configure.ac: Target logic moved out to and included from ...
136 * configure.tgt: ... this new file.
137 * configure: Regenerated.
139 2010-04-12 Mike Frysinger <vapier@gentoo.org>
141 * README-HACKING: Add more sections.
143 2010-02-11 Doug Evans <dje@sebabeach.org>
145 * cris/cpuv10.h, * cris/cpuv32.h, * cris/cris-desc.c,
146 * cris/cris-desc.h, * cris/decodev10.c, * cris/decodev32.c,
147 * cris/modelv10.c, * cris/modelv32.c, * cris/semcrisv10f-switch.c,
148 * cris/semcrisv32f-switch.c: Regenerate.
150 2010-01-09 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
152 * avr/configure: Regenerate.
153 * cris/configure: Regenerate.
154 * microblaze/configure: Regenerate.
156 2010-01-02 Doug Evans <dje@sebabeach.org>
158 * cris/arch.c, * cris/arch.h, * cris/cpuall.h, * cris/cpuv10.c,
159 * cris/cpuv10.h, * cris/cpuv32.c, * cris/cpuv32.h, * cris/cris-desc.c,
160 * cris/cris-desc.h, * cris/cris-opc.h, * cris/decodev10.c,
161 * cris/decodev10.h, * cris/decodev32.c, * cris/decodev32.h,
162 * cris/modelv10.c, * cris/modelv32.c, * cris/semcrisv10f-switch.c,
163 * cris/semcrisv32f-switch.c: Regenerate, update copyright year.
165 2010-01-01 Doug Evans <dje@sebabeach.org>
167 * cris/mloop.in: Fix copyright year update snafu.
169 2009-11-24 Joel Brobecker <brobecker@adacore.com>
171 * common/aclocal.m4: Add include of ../../config/zlib.m4.
172 * common/common.m4: Use AM_ZLIB to check for zlib support.
173 * ppc/configure.ac: Likewise.
174 * arm/configure, avr/configure, common/configure, cr16/configure,
175 cris/configure, d10v/configure, erc32/configure, frv/configure,
176 h8300/configure, iq2000/configure, lm32/configure, m32c/configure,
177 m32r/configure, m68hc11/configure, mcore/configure,
178 microblaze/configure, mips/configure, mn10300/configure,
179 moxie/configure, ppc/configure, sh/configure, sh64/configure,
180 v850/configure: Regenerate.
182 2009-11-24 DJ Delorie <dj@redhat.com>
185 * configure.ac: Add entry for Renesas RX.
186 * configure: Regenerate.
188 2009-11-22 Doug Evans <dje@sebabeach.org>
190 * cris/cpuall.h: Regenerate.
191 * cris/cpuv10.h: Regenerate.
192 * cris/cpuv32.h: Regenerate.
193 * cris/decodev10.c: Regenerate.
194 * cris/decodev10.h: Regenerate.
195 * cris/decodev32.c: Regenerate.
196 * cris/decodev32.h: Regenerate.
198 2009-11-12 Tristan Gingold <gingold@adacore.com>
200 * avr/interp.c (sim_write): Allow byte access.
203 2009-11-12 Tristan Gingold <gingold@adacore.com>
205 * avr/interp.c (sim_load): Clear memory before loading.
207 2009-11-09 Tristan Gingold <gingold@adacore.com>
209 * avr/interp.c (sim_resume): Fix typo for OP_ret.
211 2009-10-23 Doug Evans <dje@sebabeach.org>
213 * cris/arch.c: Regenerate.
214 * cris/arch.h: Regenerate.
215 * cris/cpuall.h: Regenerate.
216 * cris/cpuv10.c: Regenerate.
217 * cris/cpuv10.h: Regenerate.
218 * cris/cpuv32.c: Regenerate.
219 * cris/cpuv32.h: Regenerate.
220 * cris/cris-desc.c: Regenerate.
221 * cris/cris-desc.h: Regenerate.
222 * cris/cris-opc.h: Regenerate.
223 * cris/decodev10.c: Regenerate.
224 * cris/decodev10.h: Regenerate.
225 * cris/decodev32.c: Regenerate.
226 * cris/decodev32.h: Regenerate.
227 * cris/modelv10.c: Regenerate.
228 * cris/modelv32.c: Regenerate.
229 * cris/semcrisv10f-switch.c: Regenerate.
230 * cris/semcrisv32f-switch.c: Regenerate.
232 2009-10-22 Tristan Gingold <gingold@adacore.com>
234 * avr/interp.c (sim_stop): Return 1.
236 2009-10-16 Doug Evans <dje@sebabeach.org>
238 * MAINTAINERS: Add myself as m32r maintainer.
240 2009-10-15 Michael Egaer <eager@eagercon.com>
242 * MAINTAINERS: Add self as MicroBlaze maintainer.
244 2009-10-14 Ben Elliston <bje@gnu.org>
246 * MAINTAINERS (common): Move myself to "past maintainers" section.
248 2009-10-06 Michael Eager <eager@eagercon.com>
250 * microblaze/interp.c: Add include microblaze-dis.h.
252 2009-09-23 Michael Eager <eager@eagercon.com>
254 * configure: Add microblaze-*.* (not regenerated).
255 * configure.ac: Likewise.
256 * microblaze/config.in: New.
257 * microblaze/configure: Generate.
258 * microblaze/configure.ac: New.
259 * microblaze/interp.c: New.
260 * microblaze/Makefile.in: New.
261 * microblaze/microblaze.h: New.
262 * microblaze/microblaze.isa: New.
263 * microblaze/sim-main.h: New.
264 * microblaze/sysdep.h: New.
266 2009-08-22 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
268 * avr/config.in: Regenerate.
269 * avr/configure: Likewise.
270 * configure: Likewise.
271 * cris/config.in: Likewise.
272 * cris/configure: Likewise.
274 * configure.ac: m4_include toplevel config/override.m4.
275 * configure: Regenerate.
276 * avr/configure: Regenerate.
277 * cris/configure: Regenerate.
279 2009-07-30 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
281 * Makefile.in (datarootdir): New variable.
283 2009-05-18 Jon Beniston <jon@beniston.com>
285 * MAINTAINERS: Add Jon Beniston as maintainer of lm32 sim.
286 * configure.ac: Add lm32 target.
287 * lm32: New directory.
289 2009-05-11 Andrew Cagney <cagney@gnu.org>
291 * MAINTAINERS: Orphan ppc.
293 2009-05-08 Kevin Buettner <kevinb@redhat.com>
295 * m32c/gdb-if.c (m32c_signal_to_host): Rename to
296 m32c_signal_to_target. Change signal return values from SIGILL,
297 SIGTRAP, SIGSEGV, etc. to TARGET_SIGNAL_ILL, TARGET_SIGNAL_TRAP,
298 TARGET_SIGNAL_SEGV, etc. Fix all callers.
300 2009-04-30 Anthony Green <green@moxielogic.com>
302 * MAINTAINERS: Add myself for the moxie port.
303 * moxie: New directory.
304 * configure.ac: Add entry for moxie.
305 * configure: Regenerate.
307 2009-04-27 Tristan Gingold <gingold@adacore.com>
309 * avr: New directory.
310 * avr/interp.c, avr/Makefile.in, avr/configure.ac: New files.
311 * avr/config.in: New file, generated by autoheader.
312 * avr/configure: New file generated by autoconf.
313 * configure.ac: Add avr.
314 * configure: Regenerated.
316 2009-04-17 Carlos O'Donell <carlos@codesourcery.com>
318 * Makefile.in: Add dummy install-pdf, html, and
319 install-html targets.
321 2009-01-18 Hans-Peter Nilsson <hp@axis.com>
323 * cris/sim-if.c: Include errno.h.
324 (cris_start_address, cris_program_offset): New variables.
325 (OPTION_CRIS_PROGRAM_OFFSET, OPTION_CRIS_STARTADDR): New option
327 (cris_options): New options --cris-program-offset and
328 --cris-start-address.
329 (cris_option_handler): Handle new options.
330 (cris_program_offset_write, cris_set_section_offset_iterator)
331 (cris_offset_sections, cris_offset_sections): New functions.
332 (sim_load): Use cris_program_offset_write as function argument to
333 cris_load_elf_file, not sim_write.
334 (struct offsetinfo): New struct.
335 (cris_handle_interpreter): Fix typo in comment.
336 (sim_open): Call cris_offset_sections as soon as the bfd of the
337 infile is available. Gate bfd validity checks on abfd non-NULL.
338 (sim_create_inferior): Let cris_start_address when != -1 override
339 other start-address choices.
341 2009-01-06 Hans-Peter Nilsson <hp@axis.com>
343 * cris/traps.c (abort): Define to call sim_io_error.
344 (create_map): Make -1 imply a non-fixed address, not 0. All
345 callers changed. Only prefer the next higher unmapped address if
346 the last mapped address is no less than 0x40000000. Check that
347 the address to be mapped is not already mapped. Update head
349 (unmap_pages): Don't call abort when recursive call fails, just
350 note and return an error if a page in the range couldn't be unmapped.
351 (cris_bmod_handler, h_supr_set_handler, h_supr_get_handler)
352 (schedule, make_first_thread, cris_pipe_empty): New local variable sd.
353 (cris_break_13_handler) <case TARGET_SYS_mmap2>: Handle
354 non-MAP_FIXED argument overlapping existing map. For MAP_FIXED,
355 don't abort on page not being mapped. Handle non-anon filemap
356 with length padded to pagesize.
358 2009-01-03 Hans-Peter Nilsson <hp@axis.com>
360 * cris/sim-if.c (TARGET_AT_NULL, TARGET_AT_PHDR, TARGET_AT_PHENT)
361 (TARGET_AT_PHNUM, TARGET_AT_PAGESZ, TARGET_AT_BASE)
362 (TARGET_AT_FLAGS, TARGET_AT_ENTRY, TARGET_AT_UID, TARGET_AT_EUID)
363 (TARGET_AT_GID, TARGET_AT_EGID, TARGET_AT_HWCAP)
364 (TARGET_AT_CLKTCK): Remove redundant macros.
365 (AUX_ENT): Adjust to use standard ELF AT_* macros.
366 (AUX_ENTF): Ditto. Remove always-0 middle argument. Update all
368 (sim_open): Also pass AT_SECURE.
370 * cris/sim-main.h (struct _sim_cpu): New member
371 set_target_thread_data.
372 * cris/crisv32f.c (CRIS_TLS_REGISTER): Define.
373 * cris/crisv10f.c: Ditto.
374 * cris/cris-tmpl.c (MY (set_target_thread_data)): New function.
375 (MY (f_specific_init)): Set new _sim_cpu member to new function.
376 * cris/traps.c (TARGET_SYS_set_thread_area): Define.
377 (cris_break_13_handler) <case TARGET_SYS_set_thread_area>: New
380 * cris/traps.c (TARGET_SYS_exit_group): Define.
381 (cris_break_13_handler): Handle it like the exit for the last
384 * cris/traps.c (TARGET_UTSNAME): Update to 2009-01-01.
385 (TARGET_EPOCH): Update to match TARGET_UTSNAME. Correct comment.
386 (cris_break_13_handler) <case TARGET_SYS_uname>: Update to
387 2.6.27. Set machine field to the BFD printable name of the
390 * cris/traps.c (TARGET_MAP_DENYWRITE): Define.
391 (cris_break_13_handler) <case TARGET_SYS_mmap2>: Handle
392 TARGET_MAP_DENYWRITE.
394 * cris/traps.c (TARGET_SYS_access, TARGET_R_OK, TARGET_W_OK)
395 (TARGET_X_OK, TARGET_F_OK): Define.
396 (cris_break_13_handler) <case TARGET_SYS_access>: New case.
398 * cris/semcrisv32f-switch.c: Regenerate.
400 2008-12-30 Hans-Peter Nilsson <hp@axis.com>
402 * cris/sim-if.c (sim_open): If sim_analyze_program fails, emit
403 just a short CRIS-specific notice. Tweak the wording for a
404 failing architecture test.
406 * cris/traps.c (TARGET_SYS_writev): New macro.
407 (is_mapped_only, cris_dump_map): New functions.
408 (cris_break_13_handler) <case TARGET_SYS_mmap2>: Handle more flags
409 and prot combinations and a non-zero page-offset. If
410 TARGET_MAP_FIXED, unmap pages before mapping them.
411 <case TARGET_SYS_mprotect>: When checking, allow any length
412 argument. Don't actually do anything.
413 <case TARGET_SYS_writev>: New case.
415 * cris/Makefile.in (SIM_OBJS): Remove sim-hload.o.
416 * cris/sim-if.c: Include elf-bfd.h.
417 (struct progbounds): New members end_loadmem, start_nonloadmem.
418 (xprintf, eprintf): New functions, copied from common/sim-load.c.
419 (cris_load_elf_file, sim_load, cris_get_progbounds): New functions.
420 (get_progbounds_iterator): Renamed from get_progbounds. Make
421 static. Update head comment. Set new struct progbounds members.
422 (exec_load_addr, interp_load_addr, interp_start_addr): New static
424 (aux_ent_phdr, aux_ent_phent, aux_ent_phnum, aux_ent_base)
425 (aux_ent_entry, cris_write_interp, cris_handle_interpreter): New
427 (sim_open): New constant array auxv_entries. Rewrite AUX_ENT
428 handling to use auxv_entries. Improve error message and checking
429 for invalid programs. Use new variable abfd for the program
430 instead of for each access reaching into sd to get it.
431 (sim_create_inferior): If non-zero, use interp_start_addr instead
432 of the program start address.
433 (cris_disassemble_insn): Remove incorrect and unclear, supposedly
434 stale comment. Always specify little-endian.
436 2008-07-29 Nick Clifton <nickc@redhat.com>
438 * common/genmloop.sh: Add new parameter: -shell to specify the
439 command interpreter to use to run the input file. This is
440 necessary because otherwise SHELL is taken from the user's
441 environment, and not from the makefile that invoked this script
442 and the user might not be running an sh-like shell.
443 * cris/Makefile.in: Pass -shell parameter to genmloop.sh.
444 * fr30/Makefile.in: Likewise.
445 * frv/Makefile.in: Likewise.
446 * i960/Makefile.in: Likewise.
447 * iq2000/Makefile.in: Likewise.
448 * m32r/Makefile.in: Likewise.
450 * frv/mloop.in: Add missing start of line comment marker.
452 2008-07-11 Hans-Peter Nilsson <hp@axis.com>
454 * cris/configure: Regenerate to track ../common/common.m4 changes.
455 * cris/config.in: Ditto.
457 2008-06-06 Vladimir Prus <vladimir@codesourcery.com>
458 Daniel Jacobowitz <dan@codesourcery.com>
459 Joseph Myers <joseph@codesourcery.com>
461 * cris/configure: Regenerate.
463 2008-05-09 Olivier Hainque <hainque@adacore.com>
465 * ppc/altivec.igen (vperm): Latch inputs into temporaries.
467 2008-03-25 M R Swami Reddy <MR.Swami.Reddy@nsc.com>
469 * MAINTAINERS: Add myself as maintainer of cr16 port.
471 2008-02-12 M Ranga Swami Reddy <MR.Swami.Reddy@nsc.com>
473 Add simulator for National cr16 processor.
474 * cr16: New directory.
475 * configure.ac: Add entry for National cr16.
476 * configure: Regenerate.
478 2008-02-05 DJ Delorie <dj@redhat.com>
480 * configure.ac (v850): V850 now has a testsuite.
481 * configure (v850): Likewise.
483 2008-01-01 Daniel Jacobowitz <dan@codesourcery.com>
485 Updated copyright notices for most files.
487 2007-12-19 DJ Delorie <dj@redhat.com>
489 * frv/frv.c (frvbf_cut): Only look at the six LSBs of
492 2007-10-22 Hans-Peter Nilsson <hp@axis.com>
494 * cris/arch.c, cris/arch.h, cris/cpuall.h, cris/cpuv10.c,
495 cris/cpuv10.h, cris/cpuv32.c, cris/cpuv32.h, cris/cris-desc.c,
496 cris/cris-desc.h, cris/cris-opc.h, cris/decodev10.c,
497 cris/decodev10.h, cris/decodev32.c, cris/decodev32.h,
498 cris/modelv10.c, cris/modelv32.c, cris/semcrisv10f-switch.c,
499 cris/semcrisv32f-switch.c: Regenerate.
501 2007-08-24 Joel Brobecker <brobecker@adacore.com>
503 Switch the license of all files explicitly copyright the FSF
506 2007-03-27 Brooks Moses <brooks.moses@codesourcery.com>
508 * Makefile.in: Add dummy "pdf" target.
510 2007-02-20 Hans-Peter Nilsson <hp@axis.com>
512 * cris/traps.c (dump_statistics): Change format for cycle numbers
513 to %llu and cast parameters to unsigned long long.
515 2007-02-16 Thiemo Seufer <ths@mips.com>
517 * Makefile.in (FLAGS_TO_PASS, TARGET_FLAGS_TO_PASS): Add RUNTEST.
519 2007-01-28 Manuel Lauss <slauss@resi.at>
521 * configure.ac (sh64-*-*): Change to sh64*-*-*.
522 (sh-*-*): Change to sh*-*-*.
523 * configure: Regenerated.
525 2007-01-09 Daniel Jacobowitz <dan@codesourcery.com>
527 Updated copyright notices for most files.
529 2006-12-20 Hans-Peter Nilsson <hp@axis.com>
531 * Makefile.in (autoconf-common autoheader-common): Only run
532 autoheader on subdirs with a file config.in.
534 * configure.ac (common): Make the default "yes" for all targets
536 * configure: Regenerate.
538 * Makefile.in (autoconf-common autoheader-common): In documented
539 usage, say SHELL=/bin/sh.
540 (.PHONY): Add autoheader-common.
542 * MAINTAINERS: Add self as authorized committer for *.
544 2006-10-02 Edgar E. Iglesias <edgar@axis.com>
545 Hans-Peter Nilsson <hp@axis.com>
547 * cris/cris-sim.h (enum cris_unknown_syscall_action_type)
548 (cris_unknown_syscall_action): Declare.
549 * cris/sim-if.c (cris_unknown_syscall_action): Define.
550 (cris_options): Add cris-unknown-syscall option.
551 (cris_option_handler): Correct comment about and error message for
552 invalid --cris-cycles argument. Handle --cris-unknown-syscall.
553 * cris/traps.c: Include stdarg.h
554 (cris_unknown_syscall): New function.
555 (cris_break_13_handler): Instead of sim_io_eprintf and
556 sim_engine_halt, call cris_unknown_syscall to handle more or less
557 unknown syscalls. Adjust code as necessary to handle return
560 2006-09-30 Daniel Jacobowitz <dan@codesourcery.com>
562 * MAINTAINERS: Add Dave Brolley for sh64.
564 2006-09-30 Hans-Peter Nilsson <hp@axis.com>
566 * cris/traps.c (TARGET_PIPE_BUF): New macro.
567 (cris_pipe_empty): Correct initialization of "remaining". Only
568 adjust the "write" return value if more than TARGET_PIPE_BUF bytes
571 2006-09-29 Hans-Peter Nilsson <hp@axis.com>
573 * cris/configure.ac: Check for limits.h and sys/param.h.
574 * cris/configure, cris/config.in: Rebuild.
575 * cris/traps.c (SIM_PATHMAX): New macro.
576 (cris_break_13_handler): Use SIM_PATHMAX, not MAXPATHLEN.
578 2006-08-08 Joel Sherrill <joel.sherrill@oarcorp.com>
580 * configure.ac (sparc-*-rtems*|sparc-*-elf*): Enable erc32 simulator.
581 * Makefile.in (FLAGS_TO_PASS): Include libdir.
582 * configure: Regenerated.
584 2006-06-05 Daniel Jacobowitz <dan@codesourcery.com>
586 * cris/configure: Regenerated.
588 2006-05-31 Daniel Jacobowitz <dan@codesourcery.com>
590 * cris/configure: Regenerated.
592 2006-05-05 Andreas Schwab <schwab@suse.de>
594 * configure.ac (CFLAGS_FOR_BUILD): Set and substitute.
595 * configure: Regenerate.
597 * Makefile.in (CFLAGS_FOR_BUILD): Define.
598 (CC_FOR_BUILD): Don't override.
599 (FLAGS_TO_PASS): Pass CFLAGS_FOR_BUILD.
601 2006-05-04 Daniel Jacobowitz <dan@codesourcery.com>
603 * MAINTAINERS: Add an "Authorized committers" section, and list
606 2006-04-08 Hans-Peter Nilsson <hp@axis.com>
608 * cris/crisv32f.c (MY (deliver_interrupt)): Set CCS to new_ccs.
610 2006-04-03 Hans-Peter Nilsson <hp@axis.com>
612 * cris/dv-cris.c, cris/dv-rv.c, cris/rvdummy.c: New files.
613 * cris/Makefile.in (CONFIG_DEVICES): Remove redundant setting.
614 (dv-cris.o, dv-rv.o rvdummy$(EXEEXT), rvdummy.o): New rules.
615 (all): Depend on rvdummy$(EXEEXT).
616 * cris/configure.ac: Call SIM_AC_OPTION_WARNINGS. Check for
617 sys/socket.h and sys/select.h. Call SIM_AC_OPTION_HARDWARE,
619 * cris/configure: Regenerate.
620 * cris/cris-sim.h (cris_have_900000xxif): Declare here.
621 (enum cris_interrupt_type, crisv10deliver_interrupt)
622 (crisv32deliver_interrupt: New declarations.
623 * cris/cris-tmpl.c [WITH_HW] (MY (f_model_insn_after)): Call
624 sim_events_tickn and set state-events member work_pending when it's
625 time for the next event.
626 [WITH_HW] (MY (f_specific_init)): Set CPU-model-specific
627 interrupt-delivery function.
628 * cris/crisv10f.c (MY (deliver_interrupt)): New function.
629 * cris/crisv32f.c (MY (deliver_interrupt)): New function.
630 * cris/devices.c: Include hw-device.h.
631 (device_io_read_buffer) [WITH_HW]: Call hw_io_read_buffer.
632 (device_io_write_buffer): Only perform 0x900000xx-functions if
633 cris_have_900000xxif is nonzero. Else if WITH_HW defined,
634 call hw_io_write_buffer. Add return 0 last in function.
635 * cris/sim-if.c (cris_have_900000xxif): Now global.
636 (sim_open) [WITH_HW]: Clear deliver_interrupt cpu member.
637 Force "-model" option, effectively.
638 * cris/sim-main.h (cris_interrupt_delivery_fn): New type.
639 (struct _sim_cpu) [WITH_HW]: New member deliver_interrupt.
641 2006-04-02 Hans-Peter Nilsson <hp@axis.com>
643 * cris/Makefile.in (CRISV10F_OBJS): Remove semcrisv10f-switch.o.
644 (CRISV32F_OBJS): Remove semcrisv32f-switch.o.
645 (semcrisv10f-switch.o, semcrisv32f-switch.o: Remove dependency rules.
647 2006-03-13 DJ Delorie <dj@redhat.com>
649 * MAINTAINERS: Add self as m32c sim maintainer.
651 2006-02-23 Hans-Peter Nilsson <hp@axis.com>
653 * cris/traps.c (syscall_map): Remove CB_SYS_time / TARGET_SYS_time
655 (cris_break_13_handler) <case TARGET_SYS_time>: New case.
657 2006-01-23 Jim Blandy <jimb@redhat.com>
659 Add simulator for Renesas M32C and M16C.
661 * m32c: New directory.
662 * configure.ac: Add entry for Renesas M32C.
663 * configure: Regenerate.
665 2006-01-10 Hans-Peter Nilsson <hp@axis.com>
667 * cris/cris-tmpl.c (MY (f_model_insn_before)): Only display basic
668 cycle count for the current insn.
670 2005-12-06 Hans-Peter Nilsson <hp@axis.com>
672 * cris/cpuv10.h, cris/cpuv32.h, cris/cris-desc.c, cris/cris-opc.h,
673 cris/decodev10.c, cris/decodev10.h, cris/decodev32.c,
674 cris/decodev32.h, cris/modelv10.c, cris/modelv32.c,
675 cris/semcrisv10f-switch.c, cris/semcrisv32f-switch.c: Regenerate.
677 2005-12-05 Hans-Peter Nilsson <hp@axis.com>
679 * cris/arch.c, cris/arch.h, cris/cpuall.h, cris/cpuv10.c,
680 cris/cpuv10.h, cris/cpuv32.c, cris/cpuv32.h, cris/cris-desc.c,
681 cris/cris-desc.h, cris/cris-opc.h, cris/decodev10.c,
682 cris/decodev10.h, cris/decodev32.c, cris/decodev32.h,
683 cris/modelv10.c, cris/modelv32.c, cris/semcrisv10f-switch.c,
684 cris/semcrisv32f-switch.c: Regenerate.
686 2005-11-20 Hans-Peter Nilsson <hp@axis.com>
688 * cris/traps.c (TARGET_O_RDONLY, TARGET_O_WRONLY): Define.
689 (open_map): Use TARGET_O_ACCMODE, TARGET_O_RDONLY and
691 (cris_break_13_handler) <case TARGET_SYS_fcntl>: Add support for
692 F_GETFL on fd 0, 1 and 2.
694 2005-11-17 Hans-Peter Nilsson <hp@axis.com>
696 * cris/sim-main.h (struct _sim_cpu): New members last_syscall,
697 last_open_fd, last_open_flags.
698 * cris/traps.c: Don't include targ-vals.h.
699 (TARGET_O_ACCMODE): Define.
700 (cris_break_13_handler): Set new _sim_cpu members.
701 <case TARGET_SYS_fcntl>: Support special case of F_GETFL.
702 Rearrange code as switch. Emit "unimplemented" abort for
703 unimplemented fcntl calls.
705 * cris/traps.c (TARGET_SYS_stat): Define.
706 (syscall_stat32_map): Add entry for TARGET_SYS_stat.
707 (cris_break_13_handler) <case TARGET_SYS_stat>: New case.
709 2005-11-16 Hans-Peter Nilsson <hp@axis.com>
711 * cris/cris-tmpl.c (MY (f_model_insn_before)): Make sure only the
712 low 32 bits are used after an unsigned long cast.
714 2005-05-28 Hans-Peter Nilsson <hp@axis.com>
716 * cris/Makefile.in (stamp-v32fmloop): Depend on stamp-v10fmloop.
718 2005-05-26 Chris Demetriou <cgd@netbsd.org>
720 * MAINTAINERS: Update my mail address, move myself to the
721 "Past maintainers" section.
723 2005-05-17 Corinna Vinschen <vinschen@redhat.com>
725 * configure.ac: Add igen to v850 build.
726 * configure: Regenerate.
728 2005-04-29 Paul Brook <paul@codesourcery.com>
730 * common/callback.c (PIPE_BUF): Provide default definition.
731 (os_lstat): Use stat if lstat is not available on the host.
732 (os_ftruncate): Return EINVAL if not available on the host.
733 (os_truncate): Ditto.
734 * common/configure.ac: Check for lstat, truncate and ftruncate.
735 * common/configure: Regenerate.
736 * common/config.in: Regenerate.
738 2005-04-27 Paul Brook <paul@codesourcery.com>
740 * common/Make-common.in: Add $(EXEEXT) to "run".
742 2005-04-18 Hans-Peter Nilsson <hp@axis.com>
744 * cris/traps.c (cris_break_13_handler) <case TARGET_SYS_mmap2>:
745 For ((len & 8191) != 0 && fd == (USI) -1), don't say this isn't
746 implemented. In call to create_map, pad length argument to 8k.
748 2005-04-15 Corinna Vinschen <vinschen@redhat.com>
750 * configure.ac: Add explicit sh64 case.
751 * configure: Regenerate.
753 2005-03-30 Paul Brook <paul@codesourcery.com>
755 * arm/wrapper.c: Provide SIGTRAP and SIGBUS.
757 2005-03-24 Hans-Peter Nilsson <hp@axis.com>
759 * cris/Makefile.in (stamp-v10fcpu, stamp-v32fcpu): Add kludge to
760 include cgen-ops.h in decodev10.c and decodev32.c.
761 * cris/sim-main.h: Don't include cgen-ops.h here.
762 * cris/arch.c, cris/arch.h, cris/cpuall.h, cris/cpuv10.c,
763 cris/cpuv10.h, cris/cpuv32.c, cris/cpuv32.h, cris/cris-desc.c,
764 cris/cris-desc.h, cris/cris-opc.h, cris/decodev10.c,
765 cris/decodev10.h, cris/decodev32.c, cris/decodev32.h,
766 cris/modelv10.c, cris/modelv32.c, cris/semcrisv10f-switch.c,
767 cris/semcrisv32f-switch.c: Regenerate.
769 * cris/traps.c (cris_break_13_handler) <case
770 TARGET_SYS_rt_sigaction>: Rename sa_handler, sa_flags,
771 sa_restorer, sa_mask_low, sa_mask_high to target_sa_handler etc.
773 2005-03-23 Mark Kettenis <kettenis@gnu.org>
775 * cris/configure: Regenerate.
777 2005-02-28 Jim Blandy <jimb@redhat.com>
779 * d10v/configure.ac, igen/configure.ac, m68hc11/configure.ac,
780 mips/configure.ac, mn10300/configure.ac, v850/configure.ac:
781 Regenerated, after change to common/aclocal.m4.
783 2005-02-18 Corinna Vinschen <vinschen@redhat.com>
785 * iq2000: New target subdirectory.
786 * configure.ac: Add iq2000 target.
787 * configure: Regenerate.
789 2005-01-29 Hans-Peter Nilsson <hp@axis.com>
791 * Makefile.in (all, clean mostlyclean, distclean maintainer-clean)
792 (realclean, install): Fail if subdir make failed.
794 2005-01-28 Hans-Peter Nilsson <hp@axis.com>
796 * cris: New directory, simulator for Axis Communications CRIS
797 including CRIS v32, CGEN-based.
798 * configure.ac: Add corresponding configury.
799 * configure: Regenerate.
801 2005-01-17 Andrew Cagney <cagney@gnu.org>
803 * configure.ac: For mips*-*-* and mn10300*-*-* configure the
804 common directory. Remove sparc*-*-* from list.
806 2005-01-11 Andrew Cagney <cagney@gnu.org>
808 * Makefile.in (autoconf-common autoheader-common): Add --force to
809 autoconf and autoheader.
810 (autoconf-common autoheader-common)
811 (autoconf-install autoheader-install): Check for configure.ac, not
813 * configure.ac: Delete AC_CONFIG_AUX_DIR.
814 * configure: Re-generate.
816 2005-01-07 Andrew Cagney <cagney@gnu.org>
818 * configure.ac: Replace configure.in. Requires autoconf 2.59 and
819 correctly calls AC_CONFIG_SUBDIRS.
820 * configure: Re-generate.
822 2004-12-01 Andrew Cagney <cagney@gnu.org>
824 * i960, h8500: Delete directory.
826 2004-11-12 Andrew Cagney <cagney@gnu.org>
828 * d30v, fr30, mn10200, z8k: Delete directory.
830 2004-03-10 Ben Elliston <bje@gnu.org>
832 * MAINTAINERS: Update my mail address.
834 2004-01-26 Chris Demetriou <cgd@broadcom.com>
836 * configure.in (mips*-*-*): Configure in testsuite.
837 * configure: Regenerate.
839 2003-10-08 Dave Brolley <brolley@redhat.com>
841 * configure.in: Move frv handling to alphabetically correct placement.
843 2003-09-03 Andreas Schwab <schwab@suse.de>
845 * Makefile.in (FLAGS_TO_PASS): Pass down $(bindir) and $(mandir).
847 2003-08-29 Dave Brolley <brolley@redhat.com>
849 * MAINTAINERS: Add myself as maintainer of the FRV port.
851 2003-08-20 Michael Snyder <msnyder@redhat.com>
852 Dave Brolley <brolley@redhat.com>
854 * frv/: New directory, simulator for the Fujitsu FRV.
855 * configure.in: Add frv configury.
856 * configure: Regenerate.
858 2003-08-10 Ben Elliston <bje@wasabisystems.com>
860 * MAINTAINERS: Update my mail address.
862 2003-08-09 Andrew Cagney <cagney@redhat.com>
864 * MAINTAINERS: Andrew Cagney (mips) and Geoff Keating (ppc) drop
865 maintenance. List igen and sh maintainers. Mention that target
866 and global maintainers pick up the slack.
868 2003-07-09 Michael Snyder <msnyder@redhat.com>
870 * configure.in: Add testsuite to extra_subdirs for sh.
871 * configure: Regenerate.
873 2003-01-23 Nick Clifton <nickc@redhat.com>
877 2002-04-02 Alexandre Oliva <aoliva@redhat.com>
879 * sh/gencode.c: Replace sh3e with sh2e except in fsqrt.
881 2002-08-24 Geoffrey Keating <geoffk@redhat.com>
883 * MAINTAINERS: Update my email address.
885 2002-07-17 Andrew Cagney <ac131313@redhat.com>
887 * w65/: Delete directory.
889 2002-07-16 Andrew Cagney <ac131313@redhat.com>
891 * configure.in (extra_subdirs): Mark fr30-*-* as obsolete.
892 * configure: Re-generate.
894 2002-07-13 Andrew Cagney <ac131313@redhat.com>
896 * configure.in (extra_subdirs): Mark d30v-*-* as obsolete.
897 * configure: Re-generate.
899 2002-06-16 Andrew Cagney <ac131313@redhat.com>
901 * Makefile.in (autoconf-changelog autoheader-changelog): Let name,
902 id, date and host to be overriden by NAME, ID, DATE and HOST
903 respectfully. Use ISO dates.
905 Thu Jun 6 12:34:13 2002 Andrew Cagney <cagney@redhat.com>
907 * Makefile.in (ChangeLog): New makefile variable.
908 * README-HACKING: Mention the ChangeLog makefile variable.
910 2002-06-01 Andrew Cagney <ac131313@redhat.com>
912 * tic80/: Delete directory.
914 2002-05-16 Stephane Carrez <stcarrez@nerim.fr>
916 * MAINTAINERS: Update my email address.
918 2002-03-06 Stephane Carrez <Stephane.Carrez@worldnet.fr>
920 * MAINTAINERS: Record self as maintainer of m68hc11 simulator.
922 2002-03-01 Frank Ch. Eigler <fche@redhat.com>
924 * MAINTAINERS: Record self as a co-maintainer of just common/.
926 2002-02-07 Nick Clifton <nickc@cambridge.redhat.com>
928 * MAINTAINERS: Point to GDB files describing overall maintaince
929 and check-in procedures.
931 2002-01-10 Nick Clifton <nickc@cambridge.redhat.com>
933 * MAINTAINERS: Add myself for ARM portions.
935 2001-10-19 Andrew Cagney <ac131313@redhat.com>
937 * configure.in: When Linux or NetBSD, enable PowerPC simulator.
938 * configure: Re-generate.
940 2001-02-16 Ben Elliston <bje@redhat.com>
942 * MAINTAINERS: Add myself for common portions.
944 2001-01-15 Chris Demetriou <cgd@broadcom.com>
946 * MAINTAINERS: Added self and Andrew for the mips sim.
948 2000-10-25 Geoff Keating <geoffk@cygnus.com>
950 * MAINTAINERS: Added self and Andrew for the ppc sim.
952 Thu Jul 27 21:26:26 2000 Andrew Cagney <cagney@b1.cygnus.com>
954 From Stephane Carrez <Stephane.Carrez@worldnet.fr>:
955 * m68hc11: New directory.
957 * configure: Regenerate.
959 Tue Jul 4 13:43:54 2000 Andrew Cagney <cagney@b1.cygnus.com>
961 * tic80: New directory.
962 * configure.in: Add configury.
963 * configure: Regenerate.
965 2000-04-20 Nick Clifton <nickc@cygnus.com>
967 * configure.in (extra_subdirs): Add testsuite to strongarm
969 * configure: Regenerate.
971 Sat Mar 4 16:48:54 2000 Andrew Cagney <cagney@b1.cygnus.com>
973 * MAINTAINERS: New file. Blank.
975 1999-11-18 Ben Elliston <bje@cygnus.com>
977 * configure.in: Require autoconf 2.13 and remove obsolete
978 invocation of AC_C_CROSS.
979 * configure: Regenerate.
981 1999-09-29 Doug Evans <devans@casey.cygnus.com>
983 * configure.in: Configure the testsuite directory for thumb.
984 * configure: Regenerate.
986 1999-07-16 Ben Elliston <bje@cygnus.com>
988 * configure.in: Configure the testsuite directory for arm.
989 * configure: Regenerate.
991 1999-04-08 Nick Clifton <nickc@cygnus.com>
993 * configure.in: Add support for MCore target.
994 * configure: Regenerate.
996 1999-03-14 Stan Shebs <shebs@andros.cygnus.com>
998 * Makefile.in (FLAGS_TO_PASS, TARGET_FLAGS_TO_PASS): Remove
999 RUNTEST instead of commenting out, fixes portability problem.
1001 1999-02-08 Nick Clifton <nickc@cygnus.com>
1003 * configure.in: Add support for StrongARM target.
1004 * configure: Regenerate.
1006 1999-01-04 Jason Molenda (jsm@bugshack.cygnus.com)
1008 * configure.in: Require autoconf 2.12.1 or higher.
1010 1998-12-08 James E Wilson <wilson@wilson-pc.cygnus.com>
1012 * configure.in (i960-*-*): Add.
1013 * configure: Rebuild.
1015 Wed Nov 4 19:11:43 1998 Dave Brolley <brolley@cygnus.com>
1017 * configure.in: Added case for fr30-*-*.
1018 * configure: Regenerated.
1020 Fri Sep 25 10:12:19 1998 Christopher Faylor <cgf@cygnus.com>
1022 * ppc/Makefile.in: Add EXEEXT to installed powerpc-eabi-run program
1023 to allow successful operation on Windows.
1025 Thu May 28 14:59:46 1998 Jillian Ye <jillian@cygnus.com>
1027 * Makefile.in: Take RUNTEST out of FLAGS_TO_PASS so that make
1028 check can be invoked recursively.
1030 Wed Apr 29 12:38:53 1998 Mark Alexander <marka@cygnus.com>
1032 * configure.in: Build simulator on sparclite and sparc86x targets.
1033 * configure: Regenerate.
1035 Sun Apr 26 15:21:01 1998 Tom Tromey <tromey@cygnus.com>
1037 * Makefile.in (autoconf-common autoheader-common): Don't pass -l
1038 to autoconf and autoheader.
1040 Fri Apr 24 11:14:13 1998 Tom Tromey <tromey@cygnus.com>
1042 * Makefile.in (autoconf-common autoheader-common): Pass `-l
1043 ../common' to autoconf and autoheader. Unconditionally run
1044 autoconf in every subdir.
1045 (autoconf-changelog autoheader-changelog): Unconditionally run
1046 commands in every subdir.
1047 (autoconf-install autoheader-install): Likewise.
1049 Tue Mar 24 17:12:43 1998 Stu Grossman <grossman@bhuna.cygnus.co.uk>
1051 * Makefile.in: Get SHELL from configure.
1052 * (FLAGS_TO_PASS): Pass down SHELL.
1053 * configure: Regenerate with autoconf 2.12.1 to fix shell issues for
1056 Tue Mar 24 11::18:00 1998 Joyce Janczyn <janczyn@cygnus.com>
1058 * configure.in (extra_subdirs): Enable igen for mn10300.
1059 * configure: Re-generate.
1061 Tue Dec 2 10:10:42 1997 Nick Clifton <nickc@cygnus.com>
1063 * configure.in (extra_subdirs): Add support for thumb target.
1065 * configure (extra_subdirs): Add support for thumb target.
1067 Wed Oct 8 12:38:48 1997 Andrew Cagney <cagney@b1.cygnus.com>
1069 * configure.in (extra_subdirs): Add IGEN directory when MIPS
1071 * configure: Regenerate.
1073 Fri Sep 12 13:10:31 1997 Andrew Cagney <cagney@b1.cygnus.com>
1075 * configure.in (extra_subdirs): v850ea needs igen.
1076 * configure: Re-generate.
1078 Mon Sep 1 16:48:23 1997 Andrew Cagney <cagney@b1.cygnus.com>
1080 * configure.in (testdir): When a testsuite directory, add that to
1081 the list of confdirs.
1083 Tue Aug 19 11:17:46 1997 Andrew Cagney <cagney@b1.cygnus.com>
1085 * configure.in (extra_subdirs): Enable igen ready for V850.
1087 Tue Aug 26 15:14:48 1997 Andrew Cagney <cagney@b1.cygnus.com>
1089 * configure.in (w65-*-*, only_if_enabled): Set.
1090 * configure: Re-generate.
1092 Mon Aug 25 16:26:53 1997 Andrew Cagney <cagney@b1.cygnus.com>
1094 * configure.in (sparc*-*-*, only_if_enabled): Set
1095 only_if_enabled=yes. Check only_if_enabled before enabling a
1097 * configure: Regenerate.
1099 Mon Aug 18 10:56:59 1997 Nick Clifton <nickc@cygnus.com>
1101 * configure.in (extra_subdirs): Add v850e target.
1103 Mon Aug 18 10:56:59 1997 Nick Clifton <nickc@cygnus.com>
1105 * configure.in (extra_subdirs): Add v850ea target.
1107 Fri Jul 25 11:40:47 1997 Doug Evans <dje@canuck.cygnus.com>
1109 * configure.in (sparc*-*-*): Don't build erc32.
1110 * configure: Regenerate.
1112 Thu Apr 24 00:47:20 1997 Doug Evans <dje@canuck.cygnus.com>
1114 * configure.in (m32r-*-*): New target.
1115 * configure: Regenerate.
1117 * Makefile.in (autoconf-common, autoconf-changelog): Change $* to $@.
1119 Mon Apr 21 22:57:55 1997 Andrew Cagney <cagney@b1.cygnus.com>
1121 * Makefile.in (.NOEXPORT, MAKEOVERRIDES): Moved to end, BSD make
1122 thought that .NOEXPORT was the default target.
1124 Fri Apr 11 17:18:07 1997 Ian Lance Taylor <ian@cygnus.com>
1126 * Makefile.in (clean mostlyclean): Restore targets accidentally
1127 deleted in earlier change.
1129 Thu Apr 3 12:20:32 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
1131 * Makefile.in (autoheader-common, autoheader-changelog,
1132 autoheader-install): Perform autoheader in addition to autoconf.
1134 Wed Apr 2 15:09:05 1997 Doug Evans <dje@canuck.cygnus.com>
1136 * Makefile.in (autoconf-install): New target.
1137 (autoconf-changelog): Try different way to obtain user name.
1139 Wed Apr 2 14:25:52 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
1141 * Makefile.in (autoconf-changelog): New target, update
1142 ChangeLog for all subdirectories - normally used after
1143 autoconf-common target.
1145 Wed Mar 19 14:26:21 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
1147 * configure.in (extra_subdirs): Include testsuite for d30v.
1148 * configure: Regenerate.
1150 * Makefile.in (RUNTEST, RUNTESTFLAGS): Borrow test rules from
1152 (check): New rules - drive the testsuite.
1154 Mon Mar 3 13:01:00 1997 Jeffrey A Law (law@cygnus.com)
1156 * configure.in: Add mn10200 configure lines accidentally
1158 * configure: Regenerated.
1160 Wed Feb 19 10:34:20 1997 Andrew Cagney <cagney@critters.cygnus.com>
1162 * configure.in (extra_subdirs): Generalize common sub directory
1164 (extra_subdirs): For d30v add igen to the list to be built.
1166 Sun Feb 16 16:37:47 1997 Andrew Cagney <cagney@critters.cygnus.com>
1168 * configure.in (d30v): New target.
1169 * configure: Regenerated.
1171 Wed Feb 19 23:17:13 1997 Jeffrey A Law (law@cygnus.com)
1173 * configure.in: Don't require GCC to build the mn10200
1175 * configure: Rebuilt.
1177 Wed Feb 5 13:28:13 1997 Doug Evans <dje@canuck.cygnus.com>
1179 * configure.in: Don't configure any subdirs if no simulator
1180 is being built. Don't use erc32 for sparc64.
1181 * configure: Regenerated.
1183 Tue Feb 4 13:19:39 1997 Doug Evans <dje@canuck.cygnus.com>
1185 * Makefile.in (autoconf-common): New target.
1186 * configure.in: Do configure common.
1187 * configure: Regenerated.
1189 Thu Jan 23 13:59:52 1997 Stu Grossman (grossman@critters.cygnus.com)
1191 * configure configure.in: Don't configure common anymore. Files
1192 from common are now built in the individual simualtor directories.
1193 This fixes problems with the WinGDB build procedure.
1195 Mon Jan 13 13:16:42 1997 Jeffrey A Law (law@cygnus.com)
1197 * configure: Enable the mn10200 simulator.
1199 Wed Nov 20 01:00:36 1996 Doug Evans <dje@canuck.cygnus.com>
1201 * configure.in (configdirs): Add common.
1202 * configure: Regenerated.
1204 Fri Nov 1 08:03:30 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1206 * configure.in (powerpc*-*-linux*): Treat like the other powerpc
1207 system V based targets.
1208 * configure: Regenerate.
1210 Thu Oct 17 12:50:08 1996 Doug Evans <dje@canuck.cygnus.com>
1212 * configure.in (--enable-sim-powerpc): Delete.
1213 (--enable-sim): Add.
1214 * configure: Regenerated.
1216 Fri Oct 11 21:13:43 1996 Jeffrey A Law (law@cygnus.com)
1218 * configure.in: Only build the V850 simulator if
1220 * configure: Rebuild.
1222 Sun Sep 8 17:22:50 1996 Ian Lance Taylor <ian@cygnus.com>
1224 * configure.in: Do build erc32 for DOS and Windows hosts.
1225 * configure: Rebuild.
1227 Wed Sep 4 18:11:27 1996 Stu Grossman (grossman@critters.cygnus.com)
1229 * Makefile.in erc32/Makefile.in: Don't set srcroot. This should
1230 be inherited from the parent. Remove INSTALL_XFORM and
1231 INSTALL_XFORM1. Make INSTALL be set from configure.
1233 Wed Sep 4 15:49:16 1996 Ian Lance Taylor <ian@cygnus.com>
1235 * configure.in: Only build the MIPS simulator if we are using
1237 * configure: Rebuild.
1239 Wed Aug 28 19:05:23 1996 Jeffrey A Law (law@cygnus.com)
1241 * configure.in (v850-*-*): Added V850 simulator.
1243 Thu Aug 1 17:08:41 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1245 * configure.in (d10v-*-*): Added D10V simulator.
1247 Wed Jun 26 12:33:57 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
1249 * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir,
1250 INSTALL_PROGRAM, INSTALL_DATA): Use autoconf-set values.
1252 * configure.in (AC_PREREQ): autoconf 2.5 or higher.
1253 (AC_PROG_INSTALL): Added.
1254 * configure: Rebuilt.
1256 Mon Jun 24 14:18:26 1996 Ian Lance Taylor <ian@cygnus.com>
1258 * configure.in: Only configure erc32 if using gcc.
1259 * configure: Rebuild.
1261 Tue Jun 4 09:24:21 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1263 * configure.in (sim_target): Build PowerPC simulator for powerpc
1264 System V.4, Solaris, and Elf targets.
1265 * configure: Regenerate with autoconf 2.10.
1267 Wed May 22 12:10:49 1996 Rob Savoye <rob@chinadoll>
1269 * configure.in: Only built erc32 simulator on Unix hosts as it
1271 * configure: Regenerated with autoconf 2.8.
1273 Sun May 19 20:20:40 1996 Rob Savoye <rob@chinadoll.cygnus.com>
1275 * erc32: Sparc simulator from the ESA.
1277 Sun Apr 7 21:00:09 1996 Fred Fish <fnf@cygnus.com>
1279 From: Miles Bader <miles@gnu.ai.mit.edu>
1280 * configure.in: Use AC_CHECK_TOOL to find AR & RANLIB.
1281 * configure: Regenerate using autoconf.
1283 Thu Feb 22 11:31:50 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1285 * Makefile.in (install): Fix typo.
1287 Wed Feb 21 11:59:57 1996 Ian Lance Taylor <ian@cygnus.com>
1289 * configure: Regenerate with autoconf 2.7.
1291 * Makefile.in (all): Simplify.
1292 (clean, mostlyclean): SUBDIRS may contain whitespace; fix the loop
1293 as in the all target.
1294 (distclean, maintainer-clean, realclean): Likewise.
1295 (install): Likewise.
1297 Thu Feb 15 18:37:00 1996 Fred Fish <fnf@cygnus.com>
1299 * Makefile.in (all): Remove extra '\' char from shell script.
1301 Wed Feb 14 16:43:59 1996 Mike Meissner <meissner@tiktok.cygnus.com>
1303 * Makefile.in (all): Avoid a for loop with zero elements, even if
1304 the loop will not be executed because of an if statement.
1306 Wed Jan 31 21:48:34 1996 Fred Fish <fnf@cygnus.com>
1308 * Makefile.in (install): Add missing semicolon in "fi \".
1310 Thu Nov 9 16:10:56 1995 Michael Meissner <meissner@tiktok.cygnus.com>
1312 * Makefile.in (AR, CC, CFLAGS, CC_FOR_BUILD, RANLIB): Pick up
1313 defaults from configure.
1315 * configure.in: Pick up AR, CC, CFLAGS, CC_FOR_BUILD, RANLIB using
1317 (powerpc*-*-eabi*): Build simulator for all powerpc eabi targets
1318 if either --enable-sim-powerpc is used, or the host compiler is
1321 Wed Nov 8 15:46:49 1995 James G. Smith <jsmith@pasanda.cygnus.co.uk>
1323 * configure.in (mips*-*-*): Added "mips" simulator target.
1324 * configure: Re-generated.
1326 Tue Oct 10 11:08:20 1995 Fred Fish <fnf@cygnus.com>
1328 * Makefile.in (BISON): Remove macro.
1329 (FLAGS_TO_PASS): Remove BISON.
1331 Sun Oct 8 04:26:27 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1333 * configure.in: Explicitly `exit 0' for broken shells.
1334 * configure: Rebuilt.
1336 Fri Oct 6 12:03:27 1995 Jim Wilson <wilson@chestnut.cygnus.com>
1338 * common/run.c (main): Initialize the callbacks.
1340 Wed Sep 20 13:34:50 1995 Ian Lance Taylor <ian@cygnus.com>
1342 * Makefile.in (maintainer-clean): New synonym for realclean.
1344 Fri Aug 25 11:53:43 1995 Michael Meissner <meissner@tiktok.cygnus.com>
1346 * configure.in (powerpc*-*-eabisim*): Only build the simulator if
1347 the target is powerpc*-*-eabisim*, since it requires GCC to build.
1349 Mon Aug 21 17:53:48 1995 Michael Meissner <meissner@tiktok.cygnus.com>
1351 * configure.in (powerpc{,le}-*-*): Add psim from Andrew Cagney
1352 <cagney@highland.com.au>.
1353 * configure: Regnerate from configure.in.
1355 Thu Aug 3 10:45:37 1995 Fred Fish <fnf@cygnus.com>
1357 * Update all FSF addresses except those in COPYING* files.
1359 Thu Jul 20 15:17:29 1995 Fred Fish <fnf@cygnus.com>
1361 * Makefile.in (CC_FOR_BUILD): Define default and arrange to pass
1362 submakes either default or passed in value.
1364 Wed Jul 5 14:32:54 1995 J.T. Conklin <jtc@rtl.cygnus.com>
1366 * Makefile.in (all, clean, distclean, mostlyclean, realclean,
1367 install): Changed targets so that they descend all
1368 subdirectories in $(SUBDIRS).
1369 (*-all, *-clean, *-install): Removed targets.
1371 * configure.in: Don't bother with target makefile fragments, they
1372 are no longer needed.
1373 * configure: regenerated.
1375 * Makefile.in, configure.in: converted to autoconf.
1376 * configure: New file, generated with autconf 2.4.
1378 Wed May 24 14:48:46 1995 Steve Chamberlain <sac@slash.cygnus.com>
1380 * Makefile.in: Support ARM.
1381 * configure.in: Ditto.
1383 Sun Jan 15 16:53:47 1995 Steve Chamberlain <sac@splat>
1385 * Makefile.in: Support W65.
1386 * configure.in: Ditto.
1388 Sun Mar 13 09:27:50 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
1390 * Makefile.in: Add TAGS target.
1392 Mon Sep 13 12:47:15 1993 K. Richard Pixley (rich@sendai.cygnus.com)
1394 * Makefile.in (all-z8k, install-z8k, clean-z8k, all-h8300,
1395 install-h8300, clean-h8300, all-h8500, install-h8500,
1396 clean-h8500, all-sh, install-sh, clean-sh): do not echo
1399 Wed Jun 30 14:12:05 1993 david d `zoo' zuhn (zoo at poseidon.cygnus.com)
1401 * Makefile.in: remove endian.h trace from h8500
1403 Sun Jun 13 13:08:58 1993 Jim Kingdon (kingdon@cygnus.com)
1405 * Makefile.in: Add distclean, realclean, and mostlyclean targets.
1407 Fri May 21 11:21:16 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
1409 * Makefile.in: make all of the all-* target (except all-nothing)
1410 depend on endian.h, so that if we're not building a simulator, we
1413 Fri May 21 10:55:06 1993 Ian Lance Taylor (ian@cygnus.com)
1415 * Makefile.in (check, installcheck): Added dummy targets.
1417 Mon May 3 21:39:43 1993 Fred Fish (fnf@cygnus.com)
1419 * Makefile.in (endian): Find endian.c in $(srcdir), and also
1420 explicitly make it, since some makes apparently don't work with
1421 VPATH and .c to executable rules (SunOS make for example).
1423 Mon May 3 08:29:01 1993 Steve Chamberlain (sac@thepub.cygnus.com)
1425 * Makefile.in (endian): Add explicit rule for broken makes.
1427 Mon Mar 15 15:47:53 1993 Ian Lance Taylor (ian@cygnus.com)
1429 * Makefile.in (info, install-info): New targets.
1430 (DO_INSTALL): Renamed from INSTALL, which is overridden by the top
1433 Wed Feb 10 20:12:27 1993 K. Richard Pixley (rich@ok.cygnus.com)
1435 * Makefile.in (endian.h): build endian.h via a temporary file so
1436 that we don't leave an incomplete file lying around on
1438 (clean): remove endian, e.h, and endian.h.
1440 Mon Feb 8 11:46:06 1993 Steve Chamberlain (sac@thepub.cygnus.com)
1442 * Makefile.in, configure.in: if target isn't supported, build a