sim/ChangeLog

   1 2013-11-07  Will Newton  <will.newton@linaro.org>
   2
   3         PR gdb/9195
   4         * arm/wrapper.c (sim_create_inferior): Avoid calling
   5         bfd_get_mach with a NULL bfd.
   6
   7 2013-06-21  Nick Clifton  <nickc@redhat.com>
   8
   9         * msp430: New Directory.
  10         * configure.tgt: Add it.
  11         * configure: Regenerate.
  12
  13 2013-03-15  Steve Ellcey  <sellcey@mips.com>
  14
  15         * arm/wrapper.c (sim_complete_command): Make char arguments const.
  16         * avr/interp.c (sim_complete_command): Ditto.
  17         * common/sim-options.c (sim_complete_command): Ditto.
  18         * cr16/interp.c (sim_complete_command): Ditto.
  19         * erc32/interf.c (sim_complete_command): Ditto.
  20         * m32c/gdb-if.c (sim_complete_command): Ditto.
  21         * microblaze/interp.c (sim_complete_command): Ditto.
  22         * ppc/sim_calls.c (sim_complete_command): Ditto.
  23         * rl78/gdb-if.c (sim_complete_command): Ditto.
  24         * rx/gdb-if.c (sim_complete_command): Ditto.
  25         * sh/interp.c (sim_complete_command): Ditto.
  26
  27 2013-01-01  Joel Brobecker  <brobecker@adacore.com>
  28
  29         Update year range in copyright notice of all files.
  30
  31 2012-12-19  Joel Brobecker  <brobecker@adacore.com>
  32
  33         Update old contact info in GPL license notices.
  34
  35 2012-12-19  Joel Brobecker  <brobecker@adacore.com>
  36
  37         Update the non-FSF-copyrighted files in sim to GPLv3 or later.
  38
  39 2012-11-20  Pavel Chupin  <pavel.v.chupin@intel.com>
  40
  41         * common/Make-common.in: Use lt_cv_dlopen_libs under PLUGINS
  42         condition.
  43         * common/acinclude.m4: Define lt_cv_dlopen_libs.
  44         * arm/configure: Regenerate.
  45         * avr/configure: Regenerate.
  46         * bfin/configure: Regenerate.
  47         * common/configure: Regenerate.
  48         * cr16/configure: Regenerate.
  49         * cris/configure: Regenerate.
  50         * d10v/configure: Regenerate.
  51         * erc32/configure: Regenerate.
  52         * frv/configure: Regenerate.
  53         * h8300/configure: Regenerate.
  54         * igen/configure: Regenerate.
  55         * iq2000/configure: Regenerate.
  56         * lm32/configure: Regenerate.
  57         * m32c/configure: Regenerate.
  58         * m32r/configure: Regenerate.
  59         * m68hc11/configure: Regenerate.
  60         * mcore/configure: Regenerate.
  61         * microblaze/configure: Regenerate.
  62         * mips/configure: Regenerate.
  63         * mn10300/configure: Regenerate.
  64         * moxie/configure: Regenerate.
  65         * ppc/configure: Regenerate.
  66         * rl78/configure: Regenerate.
  67         * rx/configure: Regenerate.
  68         * sh/configure: Regenerate.
  69         * sh64/configure: Regenerate.
  70         * testsuite/configure: Regenerate.
  71         * v850/configure: Regenerate.
  72
  73 2012-11-05  Stephane Carrez  <Stephane.Carrez@gmail.com>
  74
  75         * MAINTAINERS: Update my email address.
  76
  77 2012-09-24  Steve Ellcey  <sellcey@mips.com>
  78
  79         * mips/basic.exp: Add mips*-mti-elf* target.
  80         * configure.ac: Add mips*-mti-elf* target.
  81         * configure: Regenerate.
  82
  83 2012-06-15  Joel Brobecker  <brobecker@adacore.com>
  84
  85         * configure: Regenerate.
  86
  87 2012-06-06  Michael Eager  <eager@eagercon.com>
  88
  89         * microblaze/interp.c (config.h): Add #include.
  90
  91 2011-11-29  Joel Brobecker  <brobecker@adacore.com>
  92
  93         * MAINTAINERS (Global Maintainers): New section.  Add Mike
  94         Frysinger.
  95
  96 2011-11-28  DJ Delorie  <dj@redhat.com>
  97
  98         * configure.tgt: Add rl78 support.
  99         * configure: Regenerate.
 100         * rl78: New directory.
 101         * MAINTAINERS: Add myself as RL78 maintainer.
 102
 103 2011-07-08  Hans-Peter Nilsson  <hp@axis.com>
 104
 105         * MAINTAINERS: Remove Thiemo Seufer.
 106
 107 2011-06-04  Mike Frysinger  <vapier@gentoo.org>
 108
 109         * configure.tgt (bfin-*-*): Add sim_testsuite=yes.
 110         * configure: Regenerate.
 111
 112 2011-05-04  Joseph Myers  <joseph@codesourcery.com>
 113
 114         * configure.tgt (thumb*-*-* | strongarm*-*-* | xscale-*-*): Don't
 115         handle targets.
 116         * configure: Regenerate.
 117
 118 2011-03-05  Mike Frysinger  <vapier@gentoo.org>
 119
 120         * MAINTAINERS: Add bfin entry.
 121         * configure.tgt (bfin-*-*): Handle bfin targets.
 122         * configure: Regenerate.
 123
 124 2011-01-05  Mike Frysinger  <vapier@gentoo.org>
 125
 126         * .gitignore: Add /*/hw-config.h.
 127
 128 2010-12-23  Mike Frysinger  <vapier@gentoo.org>
 129
 130         * .gitignore: New file.
 131
 132 2010-07-28  DJ Delorie  <dj@redhat.com>
 133
 134         * MAINTAINERS: Add self as RX maintainer.  Sort list.
 135
 136 2010-06-08  Nick Clifton  <nickc@redhat.com>
 137
 138         * reg.c (set_oszc): Use unsigned int for the mask.
 139         (set_szc, set_osz, set_sz): Likewise.
 140
 141 2010-04-26  Mike Frysinger  <vapier@gentoo.org>
 142
 143         * configure.ac: Target logic moved out to and included from ...
 144         * configure.tgt: ... this new file.
 145         * configure: Regenerated.
 146
 147 2010-04-12  Mike Frysinger  <vapier@gentoo.org>
 148
 149         * README-HACKING: Add more sections.
 150
 151 2010-02-11  Doug Evans  <dje@sebabeach.org>
 152
 153         * cris/cpuv10.h, * cris/cpuv32.h, * cris/cris-desc.c,
 154         * cris/cris-desc.h, * cris/decodev10.c, * cris/decodev32.c,
 155         * cris/modelv10.c, * cris/modelv32.c, * cris/semcrisv10f-switch.c,
 156         * cris/semcrisv32f-switch.c: Regenerate.
 157
 158 2010-01-09  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
 159
 160         * avr/configure: Regenerate.
 161         * cris/configure: Regenerate.
 162         * microblaze/configure: Regenerate.
 163
 164 2010-01-02  Doug Evans  <dje@sebabeach.org>
 165
 166         * cris/arch.c, * cris/arch.h, * cris/cpuall.h, * cris/cpuv10.c,
 167         * cris/cpuv10.h, * cris/cpuv32.c, * cris/cpuv32.h, * cris/cris-desc.c,
 168         * cris/cris-desc.h, * cris/cris-opc.h, * cris/decodev10.c,
 169         * cris/decodev10.h, * cris/decodev32.c, * cris/decodev32.h,
 170         * cris/modelv10.c, * cris/modelv32.c, * cris/semcrisv10f-switch.c,
 171         * cris/semcrisv32f-switch.c: Regenerate, update copyright year.
 172
 173 2010-01-01  Doug Evans  <dje@sebabeach.org>
 174
 175         * cris/mloop.in: Fix copyright year update snafu.
 176
 177 2009-11-24  Joel Brobecker  <brobecker@adacore.com>
 178
 179         * common/aclocal.m4: Add include of ../../config/zlib.m4.
 180         * common/common.m4: Use AM_ZLIB to check for zlib support.
 181         * ppc/configure.ac: Likewise.
 182         * arm/configure, avr/configure, common/configure, cr16/configure,
 183         cris/configure, d10v/configure, erc32/configure, frv/configure,
 184         h8300/configure, iq2000/configure, lm32/configure, m32c/configure,
 185         m32r/configure, m68hc11/configure, mcore/configure,
 186         microblaze/configure, mips/configure, mn10300/configure,
 187         moxie/configure, ppc/configure, sh/configure, sh64/configure,
 188         v850/configure: Regenerate.
 189
 190 2009-11-24  DJ Delorie  <dj@redhat.com>
 191
 192         * rx: New directory.
 193         * configure.ac: Add entry for Renesas RX.
 194         * configure: Regenerate.
 195
 196 2009-11-22  Doug Evans  <dje@sebabeach.org>
 197
 198         * cris/cpuall.h: Regenerate.
 199         * cris/cpuv10.h: Regenerate.
 200         * cris/cpuv32.h: Regenerate.
 201         * cris/decodev10.c: Regenerate.
 202         * cris/decodev10.h: Regenerate.
 203         * cris/decodev32.c: Regenerate.
 204         * cris/decodev32.h: Regenerate.
 205
 206 2009-11-12  Tristan Gingold  <gingold@adacore.com>
 207
 208         * avr/interp.c (sim_write): Allow byte access.
 209         (sim_read): Ditto.
 210
 211 2009-11-12  Tristan Gingold  <gingold@adacore.com>
 212
 213         * avr/interp.c (sim_load): Clear memory before loading.
 214
 215 2009-11-09  Tristan Gingold  <gingold@adacore.com>
 216
 217         * avr/interp.c (sim_resume): Fix typo for OP_ret.
 218
 219 2009-10-23  Doug Evans  <dje@sebabeach.org>
 220
 221         * cris/arch.c: Regenerate.
 222         * cris/arch.h: Regenerate.
 223         * cris/cpuall.h: Regenerate.
 224         * cris/cpuv10.c: Regenerate.
 225         * cris/cpuv10.h: Regenerate.
 226         * cris/cpuv32.c: Regenerate.
 227         * cris/cpuv32.h: Regenerate.
 228         * cris/cris-desc.c: Regenerate.
 229         * cris/cris-desc.h: Regenerate.
 230         * cris/cris-opc.h: Regenerate.
 231         * cris/decodev10.c: Regenerate.
 232         * cris/decodev10.h: Regenerate.
 233         * cris/decodev32.c: Regenerate.
 234         * cris/decodev32.h: Regenerate.
 235         * cris/modelv10.c: Regenerate.
 236         * cris/modelv32.c: Regenerate.
 237         * cris/semcrisv10f-switch.c: Regenerate.
 238         * cris/semcrisv32f-switch.c: Regenerate.
 239
 240 2009-10-22  Tristan Gingold  <gingold@adacore.com>
 241
 242         * avr/interp.c (sim_stop): Return 1.
 243
 244 2009-10-16  Doug Evans  <dje@sebabeach.org>
 245
 246         * MAINTAINERS: Add myself as m32r maintainer.
 247
 248 2009-10-15  Michael Egaer  <eager@eagercon.com>
 249
 250         * MAINTAINERS: Add self as MicroBlaze maintainer.
 251
 252 2009-10-14  Ben Elliston  <bje@gnu.org>
 253
 254         * MAINTAINERS (common): Move myself to "past maintainers" section.
 255
 256 2009-10-06  Michael Eager  <eager@eagercon.com>
 257
 258         * microblaze/interp.c: Add include microblaze-dis.h.
 259
 260 2009-09-23  Michael Eager  <eager@eagercon.com>
 261
 262         * configure: Add microblaze-*.* (not regenerated).
 263         * configure.ac: Likewise.
 264         * microblaze/config.in: New.
 265         * microblaze/configure: Generate.
 266         * microblaze/configure.ac: New.
 267         * microblaze/interp.c: New.
 268         * microblaze/Makefile.in: New.
 269         * microblaze/microblaze.h: New.
 270         * microblaze/microblaze.isa: New.
 271         * microblaze/sim-main.h: New.
 272         * microblaze/sysdep.h: New.
 273
 274 2009-08-22  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
 275
 276         * avr/config.in: Regenerate.
 277         * avr/configure: Likewise.
 278         * configure: Likewise.
 279         * cris/config.in: Likewise.
 280         * cris/configure: Likewise.
 281
 282         * configure.ac: m4_include toplevel config/override.m4.
 283         * configure: Regenerate.
 284         * avr/configure: Regenerate.
 285         * cris/configure: Regenerate.
 286
 287 2009-07-30  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
 288
 289         * Makefile.in (datarootdir): New variable.
 290
 291 2009-05-18  Jon Beniston <jon@beniston.com>
 292
 293         * MAINTAINERS: Add Jon Beniston as maintainer of lm32 sim.
 294         * configure.ac: Add lm32 target.
 295         * lm32: New directory.
 296
 297 2009-05-11  Andrew Cagney  <cagney@gnu.org>
 298
 299         * MAINTAINERS: Orphan ppc.
 300
 301 2009-05-08  Kevin Buettner  <kevinb@redhat.com>
 302
 303         * m32c/gdb-if.c (m32c_signal_to_host): Rename to
 304         m32c_signal_to_target.  Change signal return values from SIGILL,
 305         SIGTRAP, SIGSEGV, etc. to TARGET_SIGNAL_ILL, TARGET_SIGNAL_TRAP,
 306         TARGET_SIGNAL_SEGV, etc.  Fix all callers.
 307
 308 2009-04-30  Anthony Green  <green@moxielogic.com>
 309
 310         * MAINTAINERS: Add myself for the moxie port.
 311         * moxie: New directory.
 312         * configure.ac: Add entry for moxie.
 313         * configure: Regenerate.
 314
 315 2009-04-27  Tristan Gingold  <gingold@adacore.com>
 316
 317         * avr: New directory.
 318         * avr/interp.c, avr/Makefile.in, avr/configure.ac: New files.
 319         * avr/config.in: New file, generated by autoheader.
 320         * avr/configure: New file generated by autoconf.
 321         * configure.ac: Add avr.
 322         * configure: Regenerated.
 323
 324 2009-04-17  Carlos O'Donell  <carlos@codesourcery.com>
 325
 326         * Makefile.in: Add dummy install-pdf, html, and
 327         install-html targets.
 328
 329 2009-01-18  Hans-Peter Nilsson  <hp@axis.com>
 330
 331         * cris/sim-if.c: Include errno.h.
 332         (cris_start_address, cris_program_offset): New variables.
 333         (OPTION_CRIS_PROGRAM_OFFSET, OPTION_CRIS_STARTADDR): New option
 334         enums.
 335         (cris_options): New options --cris-program-offset and
 336         --cris-start-address.
 337         (cris_option_handler): Handle new options.
 338         (cris_program_offset_write, cris_set_section_offset_iterator)
 339         (cris_offset_sections, cris_offset_sections): New functions.
 340         (sim_load): Use cris_program_offset_write as function argument to
 341         cris_load_elf_file, not sim_write.
 342         (struct offsetinfo): New struct.
 343         (cris_handle_interpreter): Fix typo in comment.
 344         (sim_open): Call cris_offset_sections as soon as the bfd of the
 345         infile is available.  Gate bfd validity checks on abfd non-NULL.
 346         (sim_create_inferior): Let cris_start_address when != -1 override
 347         other start-address choices.
 348
 349 2009-01-06  Hans-Peter Nilsson  <hp@axis.com>
 350
 351         * cris/traps.c (abort): Define to call sim_io_error.
 352         (create_map): Make -1 imply a non-fixed address, not 0.  All
 353         callers changed.  Only prefer the next higher unmapped address if
 354         the last mapped address is no less than 0x40000000.  Check that
 355         the address to be mapped is not already mapped.  Update head
 356         comment.
 357         (unmap_pages): Don't call abort when recursive call fails, just
 358         note and return an error if a page in the range couldn't be unmapped.
 359         (cris_bmod_handler, h_supr_set_handler, h_supr_get_handler)
 360         (schedule, make_first_thread, cris_pipe_empty): New local variable sd.
 361         (cris_break_13_handler) <case TARGET_SYS_mmap2>: Handle
 362         non-MAP_FIXED argument overlapping existing map.  For MAP_FIXED,
 363         don't abort on page not being mapped.  Handle non-anon filemap
 364         with length padded to pagesize.
 365
 366 2009-01-03  Hans-Peter Nilsson  <hp@axis.com>
 367
 368         * cris/sim-if.c (TARGET_AT_NULL, TARGET_AT_PHDR, TARGET_AT_PHENT)
 369         (TARGET_AT_PHNUM, TARGET_AT_PAGESZ, TARGET_AT_BASE)
 370         (TARGET_AT_FLAGS, TARGET_AT_ENTRY, TARGET_AT_UID, TARGET_AT_EUID)
 371         (TARGET_AT_GID, TARGET_AT_EGID, TARGET_AT_HWCAP)
 372         (TARGET_AT_CLKTCK): Remove redundant macros.
 373         (AUX_ENT): Adjust to use standard ELF AT_* macros.
 374         (AUX_ENTF): Ditto.  Remove always-0 middle argument.  Update all
 375         callers.
 376         (sim_open): Also pass AT_SECURE.
 377
 378         * cris/sim-main.h (struct _sim_cpu): New member
 379         set_target_thread_data.
 380         * cris/crisv32f.c (CRIS_TLS_REGISTER): Define.
 381         * cris/crisv10f.c: Ditto.
 382         * cris/cris-tmpl.c (MY (set_target_thread_data)): New function.
 383         (MY (f_specific_init)): Set new _sim_cpu member to new function.
 384         * cris/traps.c (TARGET_SYS_set_thread_area): Define.
 385         (cris_break_13_handler) <case TARGET_SYS_set_thread_area>: New
 386         case.
 387
 388         * cris/traps.c (TARGET_SYS_exit_group): Define.
 389         (cris_break_13_handler): Handle it like the exit for the last
 390         thread.
 391
 392         * cris/traps.c (TARGET_UTSNAME): Update to 2009-01-01.
 393         (TARGET_EPOCH): Update to match TARGET_UTSNAME.  Correct comment.
 394         (cris_break_13_handler) <case TARGET_SYS_uname>: Update to
 395         2.6.27.  Set machine field to the BFD printable name of the
 396         machine.
 397
 398         * cris/traps.c (TARGET_MAP_DENYWRITE): Define.
 399         (cris_break_13_handler) <case TARGET_SYS_mmap2>: Handle
 400         TARGET_MAP_DENYWRITE.
 401
 402         * cris/traps.c (TARGET_SYS_access, TARGET_R_OK, TARGET_W_OK)
 403         (TARGET_X_OK, TARGET_F_OK): Define.
 404         (cris_break_13_handler) <case TARGET_SYS_access>: New case.
 405
 406         * cris/semcrisv32f-switch.c: Regenerate.
 407
 408 2008-12-30  Hans-Peter Nilsson  <hp@axis.com>
 409
 410         * cris/sim-if.c (sim_open): If sim_analyze_program fails, emit
 411         just a short CRIS-specific notice.  Tweak the wording for a
 412         failing architecture test.
 413
 414         * cris/traps.c (TARGET_SYS_writev): New macro.
 415         (is_mapped_only, cris_dump_map): New functions.
 416         (cris_break_13_handler) <case TARGET_SYS_mmap2>: Handle more flags
 417         and prot combinations and a non-zero page-offset.  If
 418         TARGET_MAP_FIXED, unmap pages before mapping them.
 419         <case TARGET_SYS_mprotect>: When checking, allow any length
 420         argument.  Don't actually do anything.
 421         <case TARGET_SYS_writev>: New case.
 422
 423         * cris/Makefile.in (SIM_OBJS): Remove sim-hload.o.
 424         * cris/sim-if.c: Include elf-bfd.h.
 425         (struct progbounds): New members end_loadmem, start_nonloadmem.
 426         (xprintf, eprintf): New functions, copied from common/sim-load.c.
 427         (cris_load_elf_file, sim_load, cris_get_progbounds): New functions.
 428         (get_progbounds_iterator): Renamed from get_progbounds.  Make
 429         static.  Update head comment.  Set new struct progbounds members.
 430         (exec_load_addr, interp_load_addr, interp_start_addr): New static
 431         variables.
 432         (aux_ent_phdr, aux_ent_phent, aux_ent_phnum, aux_ent_base)
 433         (aux_ent_entry, cris_write_interp, cris_handle_interpreter): New
 434         functions.
 435         (sim_open): New constant array auxv_entries.  Rewrite AUX_ENT
 436         handling to use auxv_entries.  Improve error message and checking
 437         for invalid programs.  Use new variable abfd for the program
 438         instead of for each access reaching into sd to get it.
 439         (sim_create_inferior): If non-zero, use interp_start_addr instead
 440         of the program start address.
 441         (cris_disassemble_insn): Remove incorrect and unclear, supposedly
 442         stale comment.  Always specify little-endian.
 443
 444 2008-07-29  Nick Clifton  <nickc@redhat.com>
 445
 446         * common/genmloop.sh: Add new parameter: -shell to specify the
 447         command interpreter to use to run the input file.  This is
 448         necessary because otherwise SHELL is taken from the user's
 449         environment, and not from the makefile that invoked this script
 450         and the user might not be running an sh-like shell.
 451         * cris/Makefile.in: Pass -shell parameter to genmloop.sh.
 452         * fr30/Makefile.in: Likewise.
 453         * frv/Makefile.in: Likewise.
 454         * i960/Makefile.in: Likewise.
 455         * iq2000/Makefile.in: Likewise.
 456         * m32r/Makefile.in: Likewise.
 457
 458         * frv/mloop.in: Add missing start of line comment marker.
 459
 460 2008-07-11  Hans-Peter Nilsson  <hp@axis.com>
 461
 462         * cris/configure: Regenerate to track ../common/common.m4 changes.
 463         * cris/config.in: Ditto.
 464
 465 2008-06-06  Vladimir Prus  <vladimir@codesourcery.com>
 466             Daniel Jacobowitz  <dan@codesourcery.com>
 467             Joseph Myers  <joseph@codesourcery.com>
 468
 469         * cris/configure: Regenerate.
 470
 471 2008-05-09  Olivier Hainque  <hainque@adacore.com>
 472
 473         * ppc/altivec.igen (vperm): Latch inputs into temporaries.
 474
 475 2008-03-25  M R Swami Reddy <MR.Swami.Reddy@nsc.com>
 476
 477         * MAINTAINERS: Add myself as maintainer of cr16 port.
 478
 479 2008-02-12  M Ranga Swami Reddy <MR.Swami.Reddy@nsc.com>
 480
 481         Add simulator for National cr16 processor.
 482         * cr16: New directory.
 483         * configure.ac: Add entry for National cr16.
 484         * configure: Regenerate.
 485
 486 2008-02-05  DJ Delorie  <dj@redhat.com>
 487
 488         * configure.ac (v850): V850 now has a testsuite.
 489         * configure (v850): Likewise.
 490
 491 2008-01-01  Daniel Jacobowitz  <dan@codesourcery.com>
 492
 493         Updated copyright notices for most files.
 494
 495 2007-12-19  DJ Delorie  <dj@redhat.com>
 496
 497         * frv/frv.c (frvbf_cut): Only look at the six LSBs of
 498         cut_point.
 499
 500 2007-10-22  Hans-Peter Nilsson  <hp@axis.com>
 501
 502         * cris/arch.c, cris/arch.h, cris/cpuall.h, cris/cpuv10.c,
 503         cris/cpuv10.h, cris/cpuv32.c, cris/cpuv32.h, cris/cris-desc.c,
 504         cris/cris-desc.h, cris/cris-opc.h, cris/decodev10.c,
 505         cris/decodev10.h, cris/decodev32.c, cris/decodev32.h,
 506         cris/modelv10.c, cris/modelv32.c, cris/semcrisv10f-switch.c,
 507         cris/semcrisv32f-switch.c: Regenerate.
 508
 509 2007-08-24  Joel Brobecker  <brobecker@adacore.com>
 510
 511         Switch the license of all files explicitly copyright the FSF
 512         to GPLv3.
 513
 514 2007-03-27  Brooks Moses  <brooks.moses@codesourcery.com>
 515
 516         * Makefile.in: Add dummy "pdf" target.
 517
 518 2007-02-20  Hans-Peter Nilsson  <hp@axis.com>
 519
 520         * cris/traps.c (dump_statistics): Change format for cycle numbers
 521         to %llu and cast parameters to unsigned long long.
 522
 523 2007-02-16  Thiemo Seufer  <ths@mips.com>
 524
 525         * Makefile.in (FLAGS_TO_PASS, TARGET_FLAGS_TO_PASS): Add RUNTEST.
 526
 527 2007-01-28  Manuel Lauss  <slauss@resi.at>
 528
 529         * configure.ac (sh64-*-*): Change to sh64*-*-*.
 530         (sh-*-*): Change to sh*-*-*.
 531         * configure: Regenerated.
 532
 533 2007-01-09  Daniel Jacobowitz  <dan@codesourcery.com>
 534
 535         Updated copyright notices for most files.
 536
 537 2006-12-20  Hans-Peter Nilsson  <hp@axis.com>
 538
 539         * Makefile.in (autoconf-common autoheader-common): Only run
 540         autoheader on subdirs with a file config.in.
 541
 542         * configure.ac (common): Make the default "yes" for all targets
 543         with sim subdirs.
 544         * configure: Regenerate.
 545
 546         * Makefile.in (autoconf-common autoheader-common): In documented
 547         usage, say SHELL=/bin/sh.
 548         (.PHONY): Add autoheader-common.
 549
 550         * MAINTAINERS: Add self as authorized committer for *.
 551
 552 2006-10-02  Edgar E. Iglesias  <edgar@axis.com>
 553             Hans-Peter Nilsson  <hp@axis.com>
 554
 555         * cris/cris-sim.h (enum cris_unknown_syscall_action_type)
 556         (cris_unknown_syscall_action): Declare.
 557         * cris/sim-if.c (cris_unknown_syscall_action): Define.
 558         (cris_options): Add cris-unknown-syscall option.
 559         (cris_option_handler): Correct comment about and error message for
 560         invalid --cris-cycles argument.  Handle --cris-unknown-syscall.
 561         * cris/traps.c: Include stdarg.h
 562         (cris_unknown_syscall): New function.
 563         (cris_break_13_handler): Instead of sim_io_eprintf and
 564         sim_engine_halt, call cris_unknown_syscall to handle more or less
 565         unknown syscalls.  Adjust code as necessary to handle return
 566         value.
 567
 568 2006-09-30  Daniel Jacobowitz  <dan@codesourcery.com>
 569
 570         * MAINTAINERS: Add Dave Brolley for sh64.
 571
 572 2006-09-30  Hans-Peter Nilsson  <hp@axis.com>
 573
 574         * cris/traps.c (TARGET_PIPE_BUF): New macro.
 575         (cris_pipe_empty): Correct initialization of "remaining".  Only
 576         adjust the "write" return value if more than TARGET_PIPE_BUF bytes
 577         are written.
 578
 579 2006-09-29  Hans-Peter Nilsson  <hp@axis.com>
 580
 581         * cris/configure.ac: Check for limits.h and sys/param.h.
 582         * cris/configure, cris/config.in: Rebuild.
 583         * cris/traps.c (SIM_PATHMAX): New macro.
 584         (cris_break_13_handler): Use SIM_PATHMAX, not MAXPATHLEN.
 585
 586 2006-08-08  Joel Sherrill <joel.sherrill@oarcorp.com>
 587
 588         * configure.ac (sparc-*-rtems*|sparc-*-elf*): Enable erc32 simulator.
 589         * Makefile.in (FLAGS_TO_PASS): Include libdir.
 590         * configure: Regenerated.
 591
 592 2006-06-05  Daniel Jacobowitz  <dan@codesourcery.com>
 593
 594         * cris/configure: Regenerated.
 595
 596 2006-05-31  Daniel Jacobowitz  <dan@codesourcery.com>
 597
 598         * cris/configure: Regenerated.
 599
 600 2006-05-05  Andreas Schwab  <schwab@suse.de>
 601
 602         * configure.ac (CFLAGS_FOR_BUILD): Set and substitute.
 603         * configure: Regenerate.
 604
 605         * Makefile.in (CFLAGS_FOR_BUILD): Define.
 606         (CC_FOR_BUILD): Don't override.
 607         (FLAGS_TO_PASS): Pass CFLAGS_FOR_BUILD.
 608
 609 2006-05-04  Daniel Jacobowitz  <dan@codesourcery.com>
 610
 611         * MAINTAINERS: Add an "Authorized committers" section, and list
 612         DJ Delorie for v850.
 613
 614 2006-04-08  Hans-Peter Nilsson  <hp@axis.com>
 615
 616         * cris/crisv32f.c (MY (deliver_interrupt)): Set CCS to new_ccs.
 617
 618 2006-04-03  Hans-Peter Nilsson  <hp@axis.com>
 619
 620         * cris/dv-cris.c, cris/dv-rv.c, cris/rvdummy.c: New files.
 621         * cris/Makefile.in (CONFIG_DEVICES): Remove redundant setting.
 622         (dv-cris.o, dv-rv.o rvdummy$(EXEEXT), rvdummy.o): New rules.
 623         (all): Depend on rvdummy$(EXEEXT).
 624         * cris/configure.ac: Call SIM_AC_OPTION_WARNINGS.  Check for
 625         sys/socket.h and sys/select.h.  Call SIM_AC_OPTION_HARDWARE,
 626         default off.
 627         * cris/configure: Regenerate.
 628         * cris/cris-sim.h (cris_have_900000xxif): Declare here.
 629         (enum cris_interrupt_type, crisv10deliver_interrupt)
 630         (crisv32deliver_interrupt: New declarations.
 631         * cris/cris-tmpl.c [WITH_HW] (MY (f_model_insn_after)): Call
 632         sim_events_tickn and set state-events member work_pending when it's
 633         time for the next event.
 634         [WITH_HW] (MY (f_specific_init)): Set CPU-model-specific
 635         interrupt-delivery function.
 636         * cris/crisv10f.c (MY (deliver_interrupt)): New function.
 637         * cris/crisv32f.c (MY (deliver_interrupt)): New function.
 638         * cris/devices.c: Include hw-device.h.
 639         (device_io_read_buffer) [WITH_HW]: Call hw_io_read_buffer.
 640         (device_io_write_buffer): Only perform 0x900000xx-functions if
 641         cris_have_900000xxif is nonzero.  Else if WITH_HW defined,
 642         call hw_io_write_buffer.  Add return 0 last in function.
 643         * cris/sim-if.c (cris_have_900000xxif): Now global.
 644         (sim_open) [WITH_HW]: Clear deliver_interrupt cpu member.
 645         Force "-model" option, effectively.
 646         * cris/sim-main.h (cris_interrupt_delivery_fn): New type.
 647         (struct _sim_cpu) [WITH_HW]: New member deliver_interrupt.
 648
 649 2006-04-02  Hans-Peter Nilsson  <hp@axis.com>
 650
 651         * cris/Makefile.in (CRISV10F_OBJS): Remove semcrisv10f-switch.o.
 652         (CRISV32F_OBJS): Remove semcrisv32f-switch.o.
 653         (semcrisv10f-switch.o, semcrisv32f-switch.o: Remove dependency rules.
 654
 655 2006-03-13  DJ Delorie  <dj@redhat.com>
 656
 657         * MAINTAINERS: Add self as m32c sim maintainer.
 658
 659 2006-02-23  Hans-Peter Nilsson  <hp@axis.com>
 660
 661         * cris/traps.c (syscall_map): Remove CB_SYS_time / TARGET_SYS_time
 662         mapping.
 663         (cris_break_13_handler) <case TARGET_SYS_time>: New case.
 664
 665 2006-01-23  Jim Blandy  <jimb@redhat.com>
 666
 667         Add simulator for Renesas M32C and M16C.
 668
 669         * m32c: New directory.
 670         * configure.ac: Add entry for Renesas M32C.
 671         * configure: Regenerate.
 672
 673 2006-01-10  Hans-Peter Nilsson  <hp@axis.com>
 674
 675         * cris/cris-tmpl.c (MY (f_model_insn_before)): Only display basic
 676         cycle count for the current insn.
 677
 678 2005-12-06  Hans-Peter Nilsson  <hp@axis.com>
 679
 680         * cris/cpuv10.h, cris/cpuv32.h, cris/cris-desc.c, cris/cris-opc.h,
 681         cris/decodev10.c, cris/decodev10.h, cris/decodev32.c,
 682         cris/decodev32.h, cris/modelv10.c, cris/modelv32.c,
 683         cris/semcrisv10f-switch.c, cris/semcrisv32f-switch.c: Regenerate.
 684
 685 2005-12-05  Hans-Peter Nilsson  <hp@axis.com>
 686
 687         * cris/arch.c, cris/arch.h, cris/cpuall.h, cris/cpuv10.c,
 688         cris/cpuv10.h, cris/cpuv32.c, cris/cpuv32.h, cris/cris-desc.c,
 689         cris/cris-desc.h, cris/cris-opc.h, cris/decodev10.c,
 690         cris/decodev10.h, cris/decodev32.c, cris/decodev32.h,
 691         cris/modelv10.c, cris/modelv32.c, cris/semcrisv10f-switch.c,
 692         cris/semcrisv32f-switch.c: Regenerate.
 693
 694 2005-11-20  Hans-Peter Nilsson  <hp@axis.com>
 695
 696         * cris/traps.c (TARGET_O_RDONLY, TARGET_O_WRONLY): Define.
 697         (open_map): Use TARGET_O_ACCMODE, TARGET_O_RDONLY and
 698         TARGET_O_WRONLY.
 699         (cris_break_13_handler) <case TARGET_SYS_fcntl>: Add support for
 700         F_GETFL on fd 0, 1 and 2.
 701
 702 2005-11-17  Hans-Peter Nilsson  <hp@axis.com>
 703
 704         * cris/sim-main.h (struct _sim_cpu): New members last_syscall,
 705         last_open_fd, last_open_flags.
 706         * cris/traps.c: Don't include targ-vals.h.
 707         (TARGET_O_ACCMODE): Define.
 708         (cris_break_13_handler): Set new _sim_cpu members.
 709         <case TARGET_SYS_fcntl>: Support special case of F_GETFL.
 710         Rearrange code as switch.  Emit "unimplemented" abort for
 711         unimplemented fcntl calls.
 712
 713         * cris/traps.c (TARGET_SYS_stat): Define.
 714         (syscall_stat32_map): Add entry for TARGET_SYS_stat.
 715         (cris_break_13_handler) <case TARGET_SYS_stat>: New case.
 716
 717 2005-11-16  Hans-Peter Nilsson  <hp@axis.com>
 718
 719         * cris/cris-tmpl.c (MY (f_model_insn_before)): Make sure only the
 720         low 32 bits are used after an unsigned long cast.
 721
 722 2005-05-28  Hans-Peter Nilsson  <hp@axis.com>
 723
 724         * cris/Makefile.in (stamp-v32fmloop): Depend on stamp-v10fmloop.
 725
 726 2005-05-26  Chris Demetriou  <cgd@netbsd.org>
 727
 728         * MAINTAINERS: Update my mail address, move myself to the
 729         "Past maintainers" section.
 730
 731 2005-05-17  Corinna Vinschen  <vinschen@redhat.com>
 732
 733         * configure.ac: Add igen to v850 build.
 734         * configure: Regenerate.
 735
 736 2005-04-29  Paul Brook  <paul@codesourcery.com>
 737
 738         * common/callback.c (PIPE_BUF): Provide default definition.
 739         (os_lstat): Use stat if lstat is not available on the host.
 740         (os_ftruncate): Return EINVAL if not available on the host.
 741         (os_truncate): Ditto.
 742         * common/configure.ac: Check for lstat, truncate and ftruncate.
 743         * common/configure: Regenerate.
 744         * common/config.in: Regenerate.
 745
 746 2005-04-27  Paul Brook  <paul@codesourcery.com>
 747
 748         * common/Make-common.in: Add $(EXEEXT) to "run".
 749
 750 2005-04-18  Hans-Peter Nilsson  <hp@axis.com>
 751
 752         * cris/traps.c (cris_break_13_handler) <case TARGET_SYS_mmap2>:
 753         For ((len & 8191) != 0 && fd == (USI) -1), don't say this isn't
 754         implemented.  In call to create_map, pad length argument to 8k.
 755
 756 2005-04-15  Corinna Vinschen  <vinschen@redhat.com>
 757
 758         * configure.ac: Add explicit sh64 case.
 759         * configure: Regenerate.
 760
 761 2005-03-30  Paul Brook  <paul@codesourcery.com>
 762
 763         * arm/wrapper.c: Provide SIGTRAP and SIGBUS.
 764
 765 2005-03-24  Hans-Peter Nilsson  <hp@axis.com>
 766
 767         * cris/Makefile.in (stamp-v10fcpu, stamp-v32fcpu): Add kludge to
 768         include cgen-ops.h in decodev10.c and decodev32.c.
 769         * cris/sim-main.h: Don't include cgen-ops.h here.
 770         * cris/arch.c, cris/arch.h, cris/cpuall.h, cris/cpuv10.c,
 771         cris/cpuv10.h, cris/cpuv32.c, cris/cpuv32.h, cris/cris-desc.c,
 772         cris/cris-desc.h, cris/cris-opc.h, cris/decodev10.c,
 773         cris/decodev10.h, cris/decodev32.c, cris/decodev32.h,
 774         cris/modelv10.c, cris/modelv32.c, cris/semcrisv10f-switch.c,
 775         cris/semcrisv32f-switch.c: Regenerate.
 776
 777         * cris/traps.c (cris_break_13_handler) <case
 778         TARGET_SYS_rt_sigaction>: Rename sa_handler, sa_flags,
 779         sa_restorer, sa_mask_low, sa_mask_high to target_sa_handler etc.
 780
 781 2005-03-23  Mark Kettenis  <kettenis@gnu.org>
 782
 783         * cris/configure: Regenerate.
 784
 785 2005-02-28  Jim Blandy  <jimb@redhat.com>
 786
 787         * d10v/configure.ac, igen/configure.ac, m68hc11/configure.ac,
 788         mips/configure.ac, mn10300/configure.ac, v850/configure.ac:
 789         Regenerated, after change to common/aclocal.m4.
 790
 791 2005-02-18  Corinna Vinschen  <vinschen@redhat.com>
 792
 793         * iq2000: New target subdirectory.
 794         * configure.ac: Add iq2000 target.
 795         * configure: Regenerate.
 796
 797 2005-01-29  Hans-Peter Nilsson  <hp@axis.com>
 798
 799         * Makefile.in (all, clean mostlyclean, distclean maintainer-clean)
 800         (realclean, install): Fail if subdir make failed.
 801
 802 2005-01-28  Hans-Peter Nilsson  <hp@axis.com>
 803
 804         * cris: New directory, simulator for Axis Communications CRIS
 805         including CRIS v32, CGEN-based.
 806         * configure.ac: Add corresponding configury.
 807         * configure: Regenerate.
 808
 809 2005-01-17  Andrew Cagney  <cagney@gnu.org>
 810
 811         * configure.ac: For mips*-*-* and mn10300*-*-* configure the
 812         common directory.  Remove sparc*-*-* from list.
 813
 814 2005-01-11  Andrew Cagney  <cagney@gnu.org>
 815
 816         * Makefile.in (autoconf-common autoheader-common): Add --force to
 817         autoconf and autoheader.
 818         (autoconf-common autoheader-common)
 819         (autoconf-install autoheader-install): Check for configure.ac, not
 820         configure.in.
 821         * configure.ac: Delete AC_CONFIG_AUX_DIR.
 822         * configure: Re-generate.
 823
 824 2005-01-07  Andrew Cagney  <cagney@gnu.org>
 825
 826         * configure.ac: Replace configure.in.  Requires autoconf 2.59 and
 827         correctly calls AC_CONFIG_SUBDIRS.
 828         * configure: Re-generate.
 829
 830 2004-12-01  Andrew Cagney  <cagney@gnu.org>
 831
 832         * i960, h8500: Delete directory.
 833
 834 2004-11-12  Andrew Cagney  <cagney@gnu.org>
 835
 836         * d30v, fr30, mn10200, z8k: Delete directory.
 837
 838 2004-03-10  Ben Elliston  <bje@gnu.org>
 839
 840         * MAINTAINERS: Update my mail address.
 841
 842 2004-01-26  Chris Demetriou  <cgd@broadcom.com>
 843
 844         * configure.in (mips*-*-*): Configure in testsuite.
 845         * configure: Regenerate.
 846
 847 2003-10-08  Dave Brolley  <brolley@redhat.com>
 848
 849         * configure.in: Move frv handling to alphabetically correct placement.
 850
 851 2003-09-03  Andreas Schwab  <schwab@suse.de>
 852
 853         * Makefile.in (FLAGS_TO_PASS): Pass down $(bindir) and $(mandir).
 854
 855 2003-08-29  Dave Brolley  <brolley@redhat.com>
 856
 857         * MAINTAINERS: Add myself as maintainer of the FRV port.
 858
 859 2003-08-20  Michael Snyder  <msnyder@redhat.com>
 860             Dave Brolley  <brolley@redhat.com>
 861
 862         * frv/: New directory, simulator for the Fujitsu FRV.
 863         * configure.in: Add frv configury.
 864         * configure: Regenerate.
 865
 866 2003-08-10  Ben Elliston  <bje@wasabisystems.com>
 867
 868         * MAINTAINERS: Update my mail address.
 869
 870 2003-08-09  Andrew Cagney  <cagney@redhat.com>
 871
 872         * MAINTAINERS: Andrew Cagney (mips) and Geoff Keating (ppc) drop
 873         maintenance.  List igen and sh maintainers.  Mention that target
 874         and global maintainers pick up the slack.
 875
 876 2003-07-09  Michael Snyder  <msnyder@redhat.com>
 877
 878         * configure.in: Add testsuite to extra_subdirs for sh.
 879         * configure: Regenerate.
 880
 881 2003-01-23  Nick Clifton  <nickc@redhat.com>
 882
 883         * Add sh2e support:
 884
 885 2002-04-02  Alexandre Oliva  <aoliva@redhat.com>
 886
 887         * sh/gencode.c: Replace sh3e with sh2e except in fsqrt.
 888
 889 2002-08-24  Geoffrey Keating  <geoffk@redhat.com>
 890
 891         * MAINTAINERS: Update my email address.
 892
 893 2002-07-17  Andrew Cagney  <ac131313@redhat.com>
 894
 895         * w65/: Delete directory.
 896
 897 2002-07-16  Andrew Cagney  <ac131313@redhat.com>
 898
 899         * configure.in (extra_subdirs): Mark fr30-*-* as obsolete.
 900         * configure: Re-generate.
 901
 902 2002-07-13  Andrew Cagney  <ac131313@redhat.com>
 903
 904         * configure.in (extra_subdirs): Mark d30v-*-* as obsolete.
 905         * configure: Re-generate.
 906
 907 2002-06-16  Andrew Cagney  <ac131313@redhat.com>
 908
 909         * Makefile.in (autoconf-changelog autoheader-changelog): Let name,
 910         id, date and host to be overriden by NAME, ID, DATE and HOST
 911         respectfully.  Use ISO dates.
 912
 913 Thu Jun  6 12:34:13 2002  Andrew Cagney  <cagney@redhat.com>
 914
 915         * Makefile.in (ChangeLog): New makefile variable.
 916         * README-HACKING: Mention the ChangeLog makefile variable.
 917
 918 2002-06-01  Andrew Cagney  <ac131313@redhat.com>
 919
 920         * tic80/: Delete directory.
 921
 922 2002-05-16  Stephane Carrez  <stcarrez@nerim.fr>
 923
 924         * MAINTAINERS: Update my email address.
 925
 926 2002-03-06  Stephane Carrez  <Stephane.Carrez@worldnet.fr>
 927
 928         * MAINTAINERS: Record self as maintainer of m68hc11 simulator.
 929
 930 2002-03-01  Frank Ch. Eigler  <fche@redhat.com>
 931
 932         * MAINTAINERS: Record self as a co-maintainer of just common/.
 933
 934 2002-02-07  Nick Clifton  <nickc@cambridge.redhat.com>
 935
 936         * MAINTAINERS: Point to GDB files describing overall maintaince
 937         and check-in procedures.
 938
 939 2002-01-10  Nick Clifton  <nickc@cambridge.redhat.com>
 940
 941         * MAINTAINERS: Add myself for ARM portions.
 942
 943 2001-10-19  Andrew Cagney  <ac131313@redhat.com>
 944
 945         * configure.in: When Linux or NetBSD, enable PowerPC simulator.
 946         * configure: Re-generate.
 947
 948 2001-02-16  Ben Elliston  <bje@redhat.com>
 949
 950         * MAINTAINERS: Add myself for common portions.
 951
 952 2001-01-15  Chris Demetriou  <cgd@broadcom.com>
 953
 954         * MAINTAINERS: Added self and Andrew for the mips sim.
 955
 956 2000-10-25  Geoff Keating  <geoffk@cygnus.com>
 957
 958         * MAINTAINERS: Added self and Andrew for the ppc sim.
 959
 960 Thu Jul 27 21:26:26 2000  Andrew Cagney  <cagney@b1.cygnus.com>
 961
 962         From Stephane Carrez <Stephane.Carrez@worldnet.fr>:
 963         * m68hc11: New directory.
 964         * configure.in: Add.
 965         * configure: Regenerate.
 966
 967 Tue Jul  4 13:43:54 2000  Andrew Cagney  <cagney@b1.cygnus.com>
 968
 969         * tic80: New directory.
 970         * configure.in: Add configury.
 971         * configure: Regenerate.
 972
 973 2000-04-20  Nick Clifton  <nickc@cygnus.com>
 974
 975         * configure.in (extra_subdirs): Add testsuite to strongarm
 976         directories.
 977         * configure: Regenerate.
 978
 979 Sat Mar  4 16:48:54 2000  Andrew Cagney  <cagney@b1.cygnus.com>
 980
 981         * MAINTAINERS: New file.  Blank.
 982
 983 1999-11-18  Ben Elliston  <bje@cygnus.com>
 984
 985         * configure.in: Require autoconf 2.13 and remove obsolete
 986         invocation of AC_C_CROSS.
 987         * configure: Regenerate.
 988
 989 1999-09-29  Doug Evans  <devans@casey.cygnus.com>
 990
 991         * configure.in: Configure the testsuite directory for thumb.
 992         * configure: Regenerate.
 993
 994 1999-07-16  Ben Elliston  <bje@cygnus.com>
 995
 996         * configure.in: Configure the testsuite directory for arm.
 997         * configure: Regenerate.
 998
 999 1999-04-08  Nick Clifton  <nickc@cygnus.com>
1000
1001         * configure.in: Add support for MCore target.
1002         * configure: Regenerate.
1003
1004 1999-03-14  Stan Shebs  <shebs@andros.cygnus.com>
1005
1006         * Makefile.in (FLAGS_TO_PASS, TARGET_FLAGS_TO_PASS): Remove
1007         RUNTEST instead of commenting out, fixes portability problem.
1008
1009 1999-02-08  Nick Clifton  <nickc@cygnus.com>
1010
1011         * configure.in: Add support for StrongARM target.
1012         * configure: Regenerate.
1013
1014 1999-01-04  Jason Molenda  (jsm@bugshack.cygnus.com)
1015
1016         * configure.in: Require autoconf 2.12.1 or higher.
1017
1018 1998-12-08  James E Wilson  <wilson@wilson-pc.cygnus.com>
1019
1020         * configure.in (i960-*-*): Add.
1021         * configure: Rebuild.
1022
1023 Wed Nov  4 19:11:43 1998  Dave Brolley  <brolley@cygnus.com>
1024
1025         * configure.in: Added case for fr30-*-*.
1026         * configure: Regenerated.
1027
1028 Fri Sep 25 10:12:19 1998  Christopher Faylor <cgf@cygnus.com>
1029
1030         * ppc/Makefile.in: Add EXEEXT to installed powerpc-eabi-run program
1031         to allow successful operation on Windows.
1032
1033 Thu May 28 14:59:46 1998 Jillian Ye <jillian@cygnus.com>
1034
1035         * Makefile.in: Take RUNTEST out of FLAGS_TO_PASS so that make
1036         check can be invoked recursively.
1037
1038 Wed Apr 29 12:38:53 1998  Mark Alexander  <marka@cygnus.com>
1039
1040         * configure.in: Build simulator on sparclite and sparc86x targets.
1041         * configure: Regenerate.
1042
1043 Sun Apr 26 15:21:01 1998  Tom Tromey  <tromey@cygnus.com>
1044
1045         * Makefile.in (autoconf-common autoheader-common): Don't pass -l
1046         to autoconf and autoheader.
1047
1048 Fri Apr 24 11:14:13 1998  Tom Tromey  <tromey@cygnus.com>
1049
1050         * Makefile.in (autoconf-common autoheader-common): Pass `-l
1051         ../common' to autoconf and autoheader.  Unconditionally run
1052         autoconf in every subdir.
1053         (autoconf-changelog autoheader-changelog): Unconditionally run
1054         commands in every subdir.
1055         (autoconf-install autoheader-install): Likewise.
1056
1057 Tue Mar 24 17:12:43 1998  Stu Grossman  <grossman@bhuna.cygnus.co.uk>
1058
1059         * Makefile.in:  Get SHELL from configure.
1060         * (FLAGS_TO_PASS):  Pass down SHELL.
1061         * configure:  Regenerate with autoconf 2.12.1 to fix shell issues for
1062         NT native builds.
1063
1064 Tue Mar 24 11::18:00 1998  Joyce Janczyn  <janczyn@cygnus.com>
1065
1066         * configure.in (extra_subdirs): Enable igen for mn10300.
1067         * configure: Re-generate.
1068
1069 Tue Dec  2 10:10:42 1997  Nick Clifton  <nickc@cygnus.com>
1070
1071         * configure.in (extra_subdirs): Add support for thumb target.
1072
1073         * configure (extra_subdirs): Add support for thumb target.
1074
1075 Wed Oct  8 12:38:48 1997  Andrew Cagney  <cagney@b1.cygnus.com>
1076
1077         * configure.in (extra_subdirs): Add IGEN directory when MIPS
1078         target.
1079         * configure: Regenerate.
1080
1081 Fri Sep 12 13:10:31 1997  Andrew Cagney  <cagney@b1.cygnus.com>
1082
1083         * configure.in (extra_subdirs): v850ea needs igen.
1084         * configure: Re-generate.
1085
1086 Mon Sep  1 16:48:23 1997  Andrew Cagney  <cagney@b1.cygnus.com>
1087
1088         * configure.in (testdir): When a testsuite directory, add that to
1089         the list of confdirs.
1090
1091 Tue Aug 19 11:17:46 1997  Andrew Cagney  <cagney@b1.cygnus.com>
1092
1093         * configure.in (extra_subdirs): Enable igen ready for V850.
1094
1095 Tue Aug 26 15:14:48 1997  Andrew Cagney  <cagney@b1.cygnus.com>
1096
1097         * configure.in (w65-*-*, only_if_enabled): Set.
1098         * configure: Re-generate.
1099
1100 Mon Aug 25 16:26:53 1997  Andrew Cagney  <cagney@b1.cygnus.com>
1101
1102         * configure.in (sparc*-*-*, only_if_enabled): Set
1103         only_if_enabled=yes.  Check only_if_enabled before enabling a
1104         simulator.
1105         * configure: Regenerate.
1106
1107 Mon Aug 18 10:56:59 1997  Nick Clifton  <nickc@cygnus.com>
1108
1109         * configure.in (extra_subdirs): Add v850e target.
1110
1111 Mon Aug 18 10:56:59 1997  Nick Clifton  <nickc@cygnus.com>
1112
1113         * configure.in (extra_subdirs): Add v850ea target.
1114
1115 Fri Jul 25 11:40:47 1997  Doug Evans  <dje@canuck.cygnus.com>
1116
1117         * configure.in (sparc*-*-*): Don't build erc32.
1118         * configure: Regenerate.
1119
1120 Thu Apr 24 00:47:20 1997  Doug Evans  <dje@canuck.cygnus.com>
1121
1122         * configure.in (m32r-*-*): New target.
1123         * configure: Regenerate.
1124
1125         * Makefile.in (autoconf-common, autoconf-changelog): Change $* to $@.
1126
1127 Mon Apr 21 22:57:55 1997  Andrew Cagney  <cagney@b1.cygnus.com>
1128
1129         * Makefile.in (.NOEXPORT, MAKEOVERRIDES): Moved to end, BSD make
1130         thought that .NOEXPORT was the default target.
1131
1132 Fri Apr 11 17:18:07 1997  Ian Lance Taylor  <ian@cygnus.com>
1133
1134         * Makefile.in (clean mostlyclean): Restore targets accidentally
1135         deleted in earlier change.
1136
1137 Thu Apr  3 12:20:32 1997  Andrew Cagney  <cagney@kremvax.cygnus.com>
1138
1139         * Makefile.in (autoheader-common, autoheader-changelog,
1140         autoheader-install): Perform autoheader in addition to autoconf.
1141
1142 Wed Apr  2 15:09:05 1997  Doug Evans  <dje@canuck.cygnus.com>
1143
1144         * Makefile.in (autoconf-install): New target.
1145         (autoconf-changelog): Try different way to obtain user name.
1146
1147 Wed Apr  2 14:25:52 1997  Andrew Cagney  <cagney@kremvax.cygnus.com>
1148
1149         * Makefile.in (autoconf-changelog): New target, update
1150         ChangeLog for all subdirectories - normally used after
1151         autoconf-common target.
1152
1153 Wed Mar 19 14:26:21 1997  Andrew Cagney  <cagney@kremvax.cygnus.com>
1154
1155         * configure.in (extra_subdirs): Include testsuite for d30v.
1156         * configure: Regenerate.
1157
1158         * Makefile.in (RUNTEST, RUNTESTFLAGS): Borrow test rules from
1159         ../gdb/Makefile.in
1160         (check): New rules - drive the testsuite.
1161
1162 Mon Mar  3 13:01:00 1997  Jeffrey A Law  (law@cygnus.com)
1163
1164         * configure.in: Add mn10200 configure lines accidentally
1165         removed.
1166         * configure: Regenerated.
1167
1168 Wed Feb 19 10:34:20 1997  Andrew Cagney  <cagney@critters.cygnus.com>
1169
1170         * configure.in (extra_subdirs): Generalize common sub directory
1171         into a list.
1172         (extra_subdirs): For d30v add igen to the list to be built.
1173
1174 Sun Feb 16 16:37:47 1997  Andrew Cagney  <cagney@critters.cygnus.com>
1175
1176         * configure.in (d30v): New target.
1177         * configure: Regenerated.
1178
1179 Wed Feb 19 23:17:13 1997  Jeffrey A Law  (law@cygnus.com)
1180
1181         * configure.in: Don't require GCC to build the mn10200
1182         simulator anymore.
1183         * configure: Rebuilt.
1184
1185 Wed Feb  5 13:28:13 1997  Doug Evans  <dje@canuck.cygnus.com>
1186
1187         * configure.in: Don't configure any subdirs if no simulator
1188         is being built.  Don't use erc32 for sparc64.
1189         * configure: Regenerated.
1190
1191 Tue Feb  4 13:19:39 1997  Doug Evans  <dje@canuck.cygnus.com>
1192
1193         * Makefile.in (autoconf-common): New target.
1194         * configure.in: Do configure common.
1195         * configure: Regenerated.
1196
1197 Thu Jan 23 13:59:52 1997  Stu Grossman  (grossman@critters.cygnus.com)
1198
1199         * configure configure.in:  Don't configure common anymore.  Files
1200         from common are now built in the individual simualtor directories.
1201         This fixes problems with the WinGDB build procedure.
1202
1203 Mon Jan 13 13:16:42 1997  Jeffrey A Law  (law@cygnus.com)
1204
1205         * configure: Enable the mn10200 simulator.
1206
1207 Wed Nov 20 01:00:36 1996  Doug Evans  <dje@canuck.cygnus.com>
1208
1209         * configure.in (configdirs): Add common.
1210         * configure: Regenerated.
1211
1212 Fri Nov  1 08:03:30 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
1213
1214         * configure.in (powerpc*-*-linux*): Treat like the other powerpc
1215         system V based targets.
1216         * configure: Regenerate.
1217
1218 Thu Oct 17 12:50:08 1996  Doug Evans  <dje@canuck.cygnus.com>
1219
1220         * configure.in (--enable-sim-powerpc): Delete.
1221         (--enable-sim): Add.
1222         * configure: Regenerated.
1223
1224 Fri Oct 11 21:13:43 1996  Jeffrey A Law  (law@cygnus.com)
1225
1226         * configure.in: Only build the V850 simulator if
1227         we are using gcc.
1228         * configure: Rebuild.
1229
1230 Sun Sep  8 17:22:50 1996  Ian Lance Taylor  <ian@cygnus.com>
1231
1232         * configure.in: Do build erc32 for DOS and Windows hosts.
1233         * configure: Rebuild.
1234
1235 Wed Sep  4 18:11:27 1996  Stu Grossman  (grossman@critters.cygnus.com)
1236
1237         * Makefile.in erc32/Makefile.in:  Don't set srcroot.  This should
1238         be inherited from the parent.  Remove INSTALL_XFORM and
1239         INSTALL_XFORM1.  Make INSTALL be set from configure.
1240
1241 Wed Sep  4 15:49:16 1996  Ian Lance Taylor  <ian@cygnus.com>
1242
1243         * configure.in: Only build the MIPS simulator if we are using
1244         gcc.
1245         * configure: Rebuild.
1246
1247 Wed Aug 28 19:05:23 1996  Jeffrey A Law  (law@cygnus.com)
1248
1249         * configure.in (v850-*-*): Added V850 simulator.
1250
1251 Thu Aug  1 17:08:41 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
1252
1253         * configure.in (d10v-*-*): Added D10V simulator.
1254
1255 Wed Jun 26 12:33:57 1996  Jason Molenda  (crash@godzilla.cygnus.co.jp)
1256
1257         * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir,
1258         INSTALL_PROGRAM, INSTALL_DATA): Use autoconf-set values.
1259         (docdir): Removed.
1260         * configure.in (AC_PREREQ): autoconf 2.5 or higher.
1261         (AC_PROG_INSTALL): Added.
1262         * configure: Rebuilt.
1263
1264 Mon Jun 24 14:18:26 1996  Ian Lance Taylor  <ian@cygnus.com>
1265
1266         * configure.in: Only configure erc32 if using gcc.
1267         * configure: Rebuild.
1268
1269 Tue Jun  4 09:24:21 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
1270
1271         * configure.in (sim_target): Build PowerPC simulator for powerpc
1272         System V.4, Solaris, and Elf targets.
1273         * configure: Regenerate with autoconf 2.10.
1274
1275 Wed May 22 12:10:49 1996  Rob Savoye  <rob@chinadoll>
1276
1277         * configure.in: Only built erc32 simulator on Unix hosts as it
1278         uses pseudo ttys.
1279         * configure: Regenerated with autoconf 2.8.
1280
1281 Sun May 19 20:20:40 1996  Rob Savoye  <rob@chinadoll.cygnus.com>
1282
1283         * erc32: Sparc simulator from the ESA.
1284
1285 Sun Apr  7 21:00:09 1996  Fred Fish  <fnf@cygnus.com>
1286
1287         From: Miles Bader  <miles@gnu.ai.mit.edu>
1288         * configure.in: Use AC_CHECK_TOOL to find AR & RANLIB.
1289         * configure: Regenerate using autoconf.
1290
1291 Thu Feb 22 11:31:50 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
1292
1293         * Makefile.in (install): Fix typo.
1294
1295 Wed Feb 21 11:59:57 1996  Ian Lance Taylor  <ian@cygnus.com>
1296
1297         * configure: Regenerate with autoconf 2.7.
1298
1299         * Makefile.in (all): Simplify.
1300         (clean, mostlyclean): SUBDIRS may contain whitespace; fix the loop
1301         as in the all target.
1302         (distclean, maintainer-clean, realclean): Likewise.
1303         (install): Likewise.
1304
1305 Thu Feb 15 18:37:00 1996  Fred Fish  <fnf@cygnus.com>
1306
1307         * Makefile.in (all): Remove extra '\' char from shell script.
1308
1309 Wed Feb 14 16:43:59 1996  Mike Meissner  <meissner@tiktok.cygnus.com>
1310
1311         * Makefile.in (all): Avoid a for loop with zero elements, even if
1312         the loop will not be executed because of an if statement.
1313
1314 Wed Jan 31 21:48:34 1996  Fred Fish  <fnf@cygnus.com>
1315
1316         * Makefile.in (install): Add missing semicolon in "fi \".
1317
1318 Thu Nov  9 16:10:56 1995  Michael Meissner  <meissner@tiktok.cygnus.com>
1319
1320         * Makefile.in (AR, CC, CFLAGS, CC_FOR_BUILD, RANLIB): Pick up
1321         defaults from configure.
1322
1323         * configure.in: Pick up AR, CC, CFLAGS, CC_FOR_BUILD, RANLIB using
1324         configure defaults.
1325         (powerpc*-*-eabi*): Build simulator for all powerpc eabi targets
1326         if either --enable-sim-powerpc is used, or the host compiler is
1327         GCC.
1328
1329 Wed Nov  8 15:46:49 1995  James G. Smith  <jsmith@pasanda.cygnus.co.uk>
1330
1331         * configure.in (mips*-*-*): Added "mips" simulator target.
1332         * configure: Re-generated.
1333
1334 Tue Oct 10 11:08:20 1995  Fred Fish  <fnf@cygnus.com>
1335
1336         * Makefile.in (BISON): Remove macro.
1337         (FLAGS_TO_PASS): Remove BISON.
1338
1339 Sun Oct  8 04:26:27 1995  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
1340
1341         * configure.in:  Explicitly `exit 0' for broken shells.
1342         * configure:  Rebuilt.
1343
1344 Fri Oct  6 12:03:27 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
1345
1346         * common/run.c (main): Initialize the callbacks.
1347
1348 Wed Sep 20 13:34:50 1995  Ian Lance Taylor  <ian@cygnus.com>
1349
1350         * Makefile.in (maintainer-clean): New synonym for realclean.
1351
1352 Fri Aug 25 11:53:43 1995  Michael Meissner  <meissner@tiktok.cygnus.com>
1353
1354         * configure.in (powerpc*-*-eabisim*): Only build the simulator if
1355         the target is powerpc*-*-eabisim*, since it requires GCC to build.
1356
1357 Mon Aug 21 17:53:48 1995  Michael Meissner  <meissner@tiktok.cygnus.com>
1358
1359         * configure.in (powerpc{,le}-*-*): Add psim from Andrew Cagney
1360         <cagney@highland.com.au>.
1361         * configure: Regnerate from configure.in.
1362
1363 Thu Aug  3 10:45:37 1995  Fred Fish  <fnf@cygnus.com>
1364
1365         * Update all FSF addresses except those in COPYING* files.
1366
1367 Thu Jul 20 15:17:29 1995  Fred Fish  <fnf@cygnus.com>
1368
1369         * Makefile.in (CC_FOR_BUILD):  Define default and arrange to pass
1370         submakes either default or passed in value.
1371
1372 Wed Jul  5 14:32:54 1995  J.T. Conklin  <jtc@rtl.cygnus.com>
1373
1374         * Makefile.in (all, clean, distclean, mostlyclean, realclean,
1375           install): Changed targets so that they descend all
1376           subdirectories in $(SUBDIRS).
1377           (*-all, *-clean, *-install): Removed targets.
1378
1379         * configure.in: Don't bother with target makefile fragments, they
1380           are no longer needed.
1381         * configure: regenerated.
1382
1383         * Makefile.in, configure.in: converted to autoconf.
1384         * configure: New file, generated with autconf 2.4.
1385
1386 Wed May 24 14:48:46 1995  Steve Chamberlain  <sac@slash.cygnus.com>
1387
1388         * Makefile.in: Support ARM.
1389         * configure.in: Ditto.
1390
1391 Sun Jan 15 16:53:47 1995  Steve Chamberlain  <sac@splat>
1392
1393         * Makefile.in: Support W65.
1394         * configure.in: Ditto.
1395
1396 Sun Mar 13 09:27:50 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
1397
1398         * Makefile.in: Add TAGS target.
1399
1400 Mon Sep 13 12:47:15 1993  K. Richard Pixley  (rich@sendai.cygnus.com)
1401
1402         * Makefile.in (all-z8k, install-z8k, clean-z8k, all-h8300,
1403           install-h8300, clean-h8300, all-h8500, install-h8500,
1404           clean-h8500, all-sh, install-sh, clean-sh): do not echo
1405           recursion lines.
1406
1407 Wed Jun 30 14:12:05 1993  david d `zoo' zuhn  (zoo at poseidon.cygnus.com)
1408
1409         * Makefile.in: remove endian.h trace from h8500
1410
1411 Sun Jun 13 13:08:58 1993  Jim Kingdon  (kingdon@cygnus.com)
1412
1413         * Makefile.in: Add distclean, realclean, and mostlyclean targets.
1414
1415 Fri May 21 11:21:16 1993  david d `zoo' zuhn  (zoo at cirdan.cygnus.com)
1416
1417         * Makefile.in: make all of the all-* target (except all-nothing)
1418         depend on endian.h, so that if we're not building a simulator, we
1419         don't built endian
1420
1421 Fri May 21 10:55:06 1993  Ian Lance Taylor  (ian@cygnus.com)
1422
1423         * Makefile.in (check, installcheck): Added dummy targets.
1424
1425 Mon May  3 21:39:43 1993  Fred Fish  (fnf@cygnus.com)
1426
1427         * Makefile.in (endian): Find endian.c in $(srcdir), and also
1428         explicitly make it, since some makes apparently don't work with
1429         VPATH and .c to executable rules (SunOS make for example).
1430
1431 Mon May  3 08:29:01 1993  Steve Chamberlain  (sac@thepub.cygnus.com)
1432
1433         * Makefile.in (endian): Add explicit rule for broken makes.
1434
1435 Mon Mar 15 15:47:53 1993  Ian Lance Taylor  (ian@cygnus.com)
1436
1437         * Makefile.in (info, install-info): New targets.
1438         (DO_INSTALL): Renamed from INSTALL, which is overridden by the top
1439         level Makefile.
1440
1441 Wed Feb 10 20:12:27 1993  K. Richard Pixley  (rich@ok.cygnus.com)
1442
1443         * Makefile.in (endian.h): build endian.h via a temporary file so
1444           that we don't leave an incomplete file lying around on
1445           interrupted builds.
1446           (clean): remove endian, e.h, and endian.h.
1447
1448 Mon Feb  8 11:46:06 1993  Steve Chamberlain  (sac@thepub.cygnus.com)
1449
1450         * Makefile.in, configure.in: if target isn't supported, build a
1451         harmless makefile.
1452
1453