sim/ChangeLog

   1 2020-09-08  David Faust  <david.faust@oracle.com>
   2
   3         * bpf/sem-be.c: Regenerate.
   4         * bpf/sem-le.c: Likewise.
   5
   6 2020-09-03  Jose E. Marchesi  <jose.marchesi@oracle.com>
   7
   8         * bpf/bpf.c: Include bpf-helpers.h.
   9         * bpf/bpf-helpers.h: Provide a prototype for bpf_trace_printk.
  10         * bpf/configure.ac: Set simulator bitsize to 64.
  11         * bpf/configure (includedir): Regenerate.
  12         * bpf/sim-if.c: Include stdlib.h.
  13         * bpf/traps.c: Likewise.
  14
  15 2020-09-03  Jose E. Marchesi  <jose.marchesi@oracle.com>
  16
  17         * configure.ac: Do not configure sim/testsuite nor sim/igen if the
  18         primary target doesn't have a simulator.
  19         * configure: Regenerate.
  20
  21 2020-08-04  Jose E. Marchesi  <jose.marchesi@oracle.com>
  22             David Faust <david.faust@oracle.com>
  23
  24         * bpf/arch.c: Likewise.
  25         * bpf/arch.h: Likewise.
  26         * bpf/cpu.c: Likewise.
  27         * bpf/cpu.h: Likewise.
  28         * bpf/cpuall.h: Likewise.
  29         * bpf/decode-be.c: Likewise.
  30         * bpf/decode-be.h: Likewise.
  31         * bpf/decode-le.c: Likewise.
  32         * bpf/decode-le.h: Likewise.
  33         * bpf/defs-be.h: Likewise.
  34         * bpf/defs-le.h: Likewise.
  35         * bpf/sem-be.c: Likewise.
  36         * bpf/sem-le.c: Likewise.
  37
  38 2020-08-04  Jose E. Marchesi  <jose.marchesi@oracle.com>
  39             David Faust <david.faust@oracle.com>
  40
  41         * configure.tgt (sim_arch): Add entry for bpf-*-*.
  42         * configure: Regenerate.
  43         * MAINTAINERS: Add maintainer for the BPF simulator.
  44         * bpf/Makefile.in: New file.
  45         * bpf/bpf-helpers.c: Likewise.
  46         * bpf/bpf-helpers.def: Likewise.
  47         * bpf/bpf-helpers.h: Likewise.
  48         * bpf/bpf-sim.h: Likewise.
  49         * bpf/bpf.c: Likewise.
  50         * bpf/config.in: Likewise.
  51         * bpf/configure.ac: Likewise.
  52         * bpf/decode.h: Likewise.
  53         * bpf/eng.h: Likewise.
  54         * bpf/mloop.in: Likewise.
  55         * bpf/sim-if.c: Likewise.
  56         * bpf/sim-main.h: Likewise.
  57         * bpf/traps.c: Likewise.
  58         * bpf/configure: Generate.
  59         * bpf/aclocal.m4: Likewise.
  60
  61 2019-12-19  Tom Tromey  <tromey@adacore.com>
  62
  63         PR build/24572:
  64         * Makefile.in (install-strip): New target.
  65
  66 2019-09-23  Dimitar Dimitrov  <dimitar@dinux.eu>
  67
  68         * MAINTAINERS: Add myself as PRU maintainer.
  69         * configure: Regenerated.
  70         * configure.tgt: Add PRU.
  71
  72 2019-09-20  Alan Modra  <amodra@gmail.com>
  73
  74         * ppc/emul_generic.c (emul_add_tree_options): Delete old bfd code.
  75
  76 2019-09-18  Alan Modra  <amodra@gmail.com>
  77
  78         * common/sim-load.c, * common/sim-utils.c, * cris/sim-if.c,
  79         * erc32/func.c, * lm32/sim-if.c, * m32c/load.c, * m32c/trace.c,
  80         * m68hc11/interp.c, * ppc/hw_htab.c, * ppc/hw_init.c,
  81         * rl78/load.c, * rl78/trace.c, * rx/gdb-if.c, * rx/load.c,
  82         * rx/trace.c: Update throughout for bfd section macro changes.
  83
  84 2019-06-13  Stafford Horne  <shorne@gmail.com>
  85
  86         * or1k/cpu.c: Regenerate.
  87         * or1k/cpu.h: Regenerate.
  88         * or1k/decode.c: Regenerate.
  89         * or1k/decode.h: Regenerate.
  90         * or1k/model.c: Regenerate.
  91         * or1k/sem-switch.c: Regenerate.
  92         * or1k/sem.c: Regenerate.
  93
  94 2019-02-28  Joel Brobecker  <brobecker@adacore.com>
  95
  96         * MAINTAINERS: Move Mike Frysinger to past maintainers' section.
  97
  98 2019-02-13  Simon Marchi  <simon.marchi@ericsson.com>
  99
 100         * MAINTAINERS: Add Andrew Burgess as global maintainer.
 101
 102 2019-01-03  Pavel I. Kryukov  <kryukov@frtk.ru>
 103
 104         * sim-base.h: Add 'extern C' if header is compiled with C++.
 105
 106 2018-12-06  Andrew Burgess  <andrew.burgess@embecosm.com>
 107
 108         * common/acinclude.m4 (enable-cgen-maint): Support passing path to
 109         cgen source tree.
 110         * cris/configure: Regenerate.
 111         * frv/configure: Regenerate.
 112         * iq2000/configure: Regenerate.
 113         * lm32/configure: Regenerate.
 114         * m32r/configure: Regenerate.
 115         * or1k/configure: Regenerate.
 116         * sh64/configure: Regenerate.
 117
 118 2018-10-05  Stafford Horne  <shorne@gmail.com>
 119
 120         * or1k/cpu.h: Regenerate.
 121         * or1k/decode.c: Regenerate.
 122         * or1k/decode.h: Regenerate.
 123         * or1k/model.c: Regenerate.
 124         * or1k/sem-switch.c: Regenerate.
 125         * or1k/sem.c: Regenerate:
 126
 127 2018-07-20  Maciej W. Rozycki  <macro@mips.com>
 128
 129         * MAINTAINERS: Update my e-mail address, downgrade to MIPS I-IV
 130         ISA maintenance.
 131
 132 2018-07-19  DJ Delorie  <dj@redhat.com>
 133
 134         * MAINTAINERS (rl78, m32c, rx, v850): Remove myself as maintainer.
 135
 136 2018-07-14  Stafford Horne  <shorne@gmail.com>
 137
 138         * MAINTAINERS (or1k): Add myself as or1k maintainer.
 139
 140 2018-06-19  Simon Marchi  <simon.marchi@ericsson.com>
 141
 142         * All configure.ac: Remove AC_PREREQ.
 143         * All configure: Re-generate.
 144
 145 2018-01-22  Maciej W. Rozycki  <macro@mips.com>
 146
 147         * MAINTAINERS: Update my company e-mail address.
 148
 149 2017-12-12  Stafford Horne  <shorne@gmail.com>
 150             Peter Gavin  <pgavin@gmail.com>
 151
 152         * configure: Regenerated.
 153         * or1k/aclocal.m4: Generated.
 154         * or1k/config.in: Generated.
 155         * or1k/configure: Generated.
 156
 157 2017-12-12  Stafford Horne  <shorne@gmail.com>
 158             Peter Gavin  <pgavin@gmail.com>
 159
 160         * or1k/arch.c: Generated.
 161         * or1k/arch.h: Generated.
 162         * or1k/cpu.c: Generated.
 163         * or1k/cpu.h: Generated.
 164         * or1k/cpuall.h: Generated.
 165         * or1k/decode.c: Generated.
 166         * or1k/decode.h: Generated.
 167         * or1k/model.c: Generated.
 168         * or1k/sem-switch.c: Generated.
 169         * or1k/sem.c: Generated.
 170
 171 2017-12-12  Stafford Horne  <shorne@gmail.com>
 172             Peter Gavin  <pgavin@gmail.com>
 173
 174         * configure.tgt: Add or1k sim.
 175         * or1k/README: New file.
 176         * or1k/Makefile.in: New file.
 177         * or1k/configure.ac: New file.
 178         * or1k/mloop.in: New file.
 179         * or1k/or1k-sim.h: New file.
 180         * or1k/or1k.c: New file.
 181         * or1k/sim-if.c: New file.
 182         * or1k/sim-main.h: New file.
 183         * or1k/traps.c: New file.
 184
 185 2017-11-01  James Bowman  <james.bowman@ftdichip.com>
 186
 187         * ft32/interp.c (step_once): Add ft32 shortcode decoder.
 188
 189 2017-10-12  James Bowman  <james.bowman@ftdichip.com>
 190
 191         * ft32/interp.c (step_once): Replace FT32_FLD_K8 with K15.
 192
 193 2017-10-12  James Bowman  <james.bowman@ftdichip.com>
 194
 195         * MAINTAINERS (ft32): Add myself.
 196
 197 2017-10-03  Jim Wilson  <wilson@tuliptree.org>
 198
 199         * MAINTAINERS (aarch64): Update my email address.
 200
 201 2017-09-06  John Baldwin  <jhb@FreeBSD.org>
 202
 203         * configure.ac: Honor existing CC_FOR_BUILD in environment.
 204         * configure: Regenerate.
 205
 206 2017-02-14  Jim Wilson  <jim.wilson@linaro.org>
 207
 208         * MAINTAINTERS (aarch64): Add myself.
 209
 210 2016-12-14  Maciej W. Rozycki  <macro@imgtec.com>
 211
 212         * MAINTAINERS (Maintainers for particular sims): Add myself as
 213         a MIPS maintainer.
 214
 215 2016-02-03  Maciej W. Rozycki  <macro@linux-mips.org>
 216
 217         * MAINTAINERS (Past sim maintainers): Add Thiemo Seufer.
 218
 219 2016-01-09  Mike Frysinger  <vapier@gentoo.org>
 220
 221         * configure.ac: Delete sim_common check and the
 222         AC_CONFIG_SUBDIRS(common) call.
 223         * configure: Regenerate.
 224         * configure.tgt (sim_common): Delete the variable.
 225
 226 2016-01-09  Mike Frysinger  <vapier@gentoo.org>
 227
 228         * .gitignore: Delete /common/cconfig.h entry.
 229
 230 2016-01-05  Nick Clifton  <nickc@redhat.com>
 231
 232         * MAINTAINERS: Add myself as AArch64 sim maintainer.
 233
 234 2015-12-09  Tristan Gingold  <gingold@adacore.com>
 235
 236         * aarch64/simulator.c: Remove syscall.h include.
 237
 238 2015-12-26  Mike Frysinger  <vapier@gentoo.org>
 239
 240         * README-HACKING: Delete mention of tconfig.h.
 241
 242 2015-11-24  Nick Clifton  <nickc@redhat.com>
 243
 244         * configure.tgt: Add aarch64 entry.
 245         * configure: Regenerate.
 246
 247 2015-06-23  Mike Frysinger  <vapier@gentoo.org>
 248
 249         * configure.ac (AC_ARG_ENABLE(sim)): Call AS_HELP_STRING.
 250         * configure: Regenerate.
 251
 252 2015-06-12  Mike Frysinger  <vapier@gentoo.org>
 253
 254         * README-HACKING: Change configure.in to configure.ac.
 255
 256 2015-04-02  H.J. Lu  <hongjiu.lu@intel.com>
 257
 258         * arm/configure: Regenerated.
 259         * avr/configure: Likewise.
 260         * bfin/configure: Likewise.
 261         * common/configure: Likewise.
 262         * cr16/configure: Likewise.
 263         * cris/configure: Likewise.
 264         * d10v/configure: Likewise.
 265         * erc32/configure: Likewise.
 266         * frv/configure: Likewise.
 267         * ft32/configure: Likewise.
 268         * h8300/configure: Likewise.
 269         * igen/configure: Likewise.
 270         * iq2000/configure: Likewise.
 271         * lm32/configure: Likewise.
 272         * m32c/configure: Likewise.
 273         * m32r/configure: Likewise.
 274         * m68hc11/configure: Likewise.
 275         * mcore/configure: Likewise.
 276         * microblaze/configure: Likewise.
 277         * mips/configure: Likewise.
 278         * mn10300/configure: Likewise.
 279         * moxie/configure: Likewise.
 280         * msp430/configure: Likewise.
 281         * ppc/configure: Likewise.
 282         * rl78/configure: Likewise.
 283         * rx/configure: Likewise.
 284         * sh/configure: Likewise.
 285         * sh64/configure: Likewise.
 286         * v850/configure: Likewise.
 287
 288 2015-04-01  H.J. Lu  <hongjiu.lu@intel.com>
 289
 290         * common/Make-common.in (CSEARCH): Remove $(ZLIBINC).
 291         (BFD_LIB): Remove $(ZLIB).
 292         (CONFIG_LIBS): Add $(ZLIB).
 293         * ppc/Makefile.in (ZLIBINC): Removed.
 294         (INCLUDES): Remove $(ZLIBINC).
 295         (BFD_LIB): Remove $(ZLIB).
 296
 297 2015-04-01  H.J. Lu  <hongjiu.lu@intel.com>
 298
 299         * arm/configure: Regenerated.
 300         * avr/configure: Likewise.
 301         * bfin/configure: Likewise.
 302         * common/configure: Likewise.
 303         * cr16/configure: Likewise.
 304         * cris/configure: Likewise.
 305         * d10v/configure: Likewise.
 306         * erc32/configure: Likewise.
 307         * frv/configure: Likewise.
 308         * ft32/configure: Likewise.
 309         * h8300/configure: Likewise.
 310         * igen/configure: Likewise.
 311         * iq2000/configure: Likewise.
 312         * lm32/configure: Likewise.
 313         * m32c/configure: Likewise.
 314         * m32r/configure: Likewise.
 315         * m68hc11/configure: Likewise.
 316         * mcore/configure: Likewise.
 317         * microblaze/configure: Likewise.
 318         * mips/configure: Likewise.
 319         * mn10300/configure: Likewise.
 320         * moxie/configure: Likewise.
 321         * msp430/configure: Likewise.
 322         * ppc/configure: Likewise.
 323         * rl78/configure: Likewise.
 324         * rx/configure: Likewise.
 325         * sh/configure: Likewise.
 326         * sh64/configure: Likewise.
 327         * v850/configure: Likewise.
 328
 329 2015-03-29  Mike Frysinger  <vapier@gentoo.org>
 330
 331         * configure: Regenerate.
 332         * configure.ac: Delete sim_testsuite check and config in testsuite.
 333         * configure.tgt (sim_testsuite): Delete everywhere.
 334
 335 2015-03-28  Mike Frysinger  <vapier@gentoo.org>
 336
 337         * configure: Regenerate.
 338         * configure.tgt (avr*-*-*): Set sim_testsuite=yes.
 339
 340 2015-03-28  James Bowman  <james.bowman@ftdichip.com>
 341
 342         * configure.tgt: Add FT32 entry.
 343         * configure: Regenerate.
 344
 345 2015-03-16  Mike Frysinger  <vapier@gentoo.org>
 346
 347         * .gitignore: Delete tconfig.h.
 348         * README-HACKING: Change tconfig.in to tconfig.h.
 349
 350 2014-03-12  Nick Clifton  <nickc@redhat.com>
 351
 352         * MAINTAINERS: Add myself as the maintainer for the MSP430.
 353
 354 2014-03-10  Mike Frysinger  <vapier@gentoo.org>
 355
 356         * configure.tgt (msp430*-*-*): Set sim_testsuite to yes.
 357         * configure: Regenerate.
 358
 359 2014-01-06  Tom Tromey  <tromey@redhat.com>
 360
 361         * common/cgen-trace.c: Don't use old VA_* macros.
 362         * common/sim-load.c (xprintf): Likewise.
 363         * common/sim-trace.c (trace_printf, debug_printf): Likewise.
 364
 365 2014-01-06  Tom Tromey  <tromey@redhat.com>
 366
 367         * README-HACKING: Don't use PARAMS.
 368         * arm/wrapper.c: Don't use PARAMS.
 369         * bfin/sim-main.h: Don't use PARAMS.
 370         * common/callback.c: Don't use PARAMS.
 371         * common/cgen-trace.c: Don't use PARAMS.
 372         * common/run-sim.h: Don't use PARAMS.
 373         * common/run.c: Don't use PARAMS.
 374         * common/sim-base.h: Don't use PARAMS.
 375         * common/sim-load.c: Don't use PARAMS.
 376         * common/sim-options.h: Don't use PARAMS.
 377         * common/sim-trace.c: Don't use PARAMS.
 378         * common/sim-trace.h: Don't use PARAMS.
 379         * common/sim-utils.h: Don't use PARAMS.
 380         * cr16/cr16_sim.h: Don't use PARAMS.
 381         * cr16/gencode.c: Don't use PARAMS.
 382         * cr16/interp.c: Don't use PARAMS.
 383         * cr16/simops.c: Don't use PARAMS.
 384         * d10v/d10v_sim.h: Don't use PARAMS.
 385         * d10v/gencode.c: Don't use PARAMS.
 386         * d10v/interp.c: Don't use PARAMS.
 387         * d10v/simops.c: Don't use PARAMS.
 388         * erc32/erc32.c: Don't use PARAMS.
 389         * erc32/exec.c: Don't use PARAMS.
 390         * erc32/float.c: Don't use PARAMS.
 391         * erc32/func.c: Don't use PARAMS.
 392         * erc32/sis.c: Don't use PARAMS.
 393         * erc32/sis.h: Don't use PARAMS.
 394         * mips/interp.c: Don't use PARAMS.
 395         * mips/sim-main.h: Don't use PARAMS.
 396         * sh/interp.c: Don't use PARAMS.
 397         * v850/sim-main.h: Don't use PARAMS.
 398         * v850/v850_sim.h: Don't use PARAMS.
 399
 400 2013-11-07  Will Newton  <will.newton@linaro.org>
 401
 402         PR gdb/15508
 403         * arm/wrapper.c (sim_create_inferior): Call init before
 404         accessing STATE.
 405
 406 2013-11-07  Will Newton  <will.newton@linaro.org>
 407
 408         PR gdb/8989
 409         * arm/wrapper.c (sim_create_inferior): Avoid calling
 410         bfd_get_mach with a NULL bfd.
 411
 412 2013-06-21  Nick Clifton  <nickc@redhat.com>
 413
 414         * msp430: New Directory.
 415         * configure.tgt: Add it.
 416         * configure: Regenerate.
 417
 418 2013-03-15  Steve Ellcey  <sellcey@mips.com>
 419
 420         * arm/wrapper.c (sim_complete_command): Make char arguments const.
 421         * avr/interp.c (sim_complete_command): Ditto.
 422         * common/sim-options.c (sim_complete_command): Ditto.
 423         * cr16/interp.c (sim_complete_command): Ditto.
 424         * erc32/interf.c (sim_complete_command): Ditto.
 425         * m32c/gdb-if.c (sim_complete_command): Ditto.
 426         * microblaze/interp.c (sim_complete_command): Ditto.
 427         * ppc/sim_calls.c (sim_complete_command): Ditto.
 428         * rl78/gdb-if.c (sim_complete_command): Ditto.
 429         * rx/gdb-if.c (sim_complete_command): Ditto.
 430         * sh/interp.c (sim_complete_command): Ditto.
 431
 432 2013-01-01  Joel Brobecker  <brobecker@adacore.com>
 433
 434         Update year range in copyright notice of all files.
 435
 436 2012-12-19  Joel Brobecker  <brobecker@adacore.com>
 437
 438         Update old contact info in GPL license notices.
 439
 440 2012-12-19  Joel Brobecker  <brobecker@adacore.com>
 441
 442         Update the non-FSF-copyrighted files in sim to GPLv3 or later.
 443
 444 2012-11-20  Pavel Chupin  <pavel.v.chupin@intel.com>
 445
 446         * common/Make-common.in: Use lt_cv_dlopen_libs under PLUGINS
 447         condition.
 448         * common/acinclude.m4: Define lt_cv_dlopen_libs.
 449         * arm/configure: Regenerate.
 450         * avr/configure: Regenerate.
 451         * bfin/configure: Regenerate.
 452         * common/configure: Regenerate.
 453         * cr16/configure: Regenerate.
 454         * cris/configure: Regenerate.
 455         * d10v/configure: Regenerate.
 456         * erc32/configure: Regenerate.
 457         * frv/configure: Regenerate.
 458         * h8300/configure: Regenerate.
 459         * igen/configure: Regenerate.
 460         * iq2000/configure: Regenerate.
 461         * lm32/configure: Regenerate.
 462         * m32c/configure: Regenerate.
 463         * m32r/configure: Regenerate.
 464         * m68hc11/configure: Regenerate.
 465         * mcore/configure: Regenerate.
 466         * microblaze/configure: Regenerate.
 467         * mips/configure: Regenerate.
 468         * mn10300/configure: Regenerate.
 469         * moxie/configure: Regenerate.
 470         * ppc/configure: Regenerate.
 471         * rl78/configure: Regenerate.
 472         * rx/configure: Regenerate.
 473         * sh/configure: Regenerate.
 474         * sh64/configure: Regenerate.
 475         * testsuite/configure: Regenerate.
 476         * v850/configure: Regenerate.
 477
 478 2012-11-05  Stephane Carrez  <Stephane.Carrez@gmail.com>
 479
 480         * MAINTAINERS: Update my email address.
 481
 482 2012-09-24  Steve Ellcey  <sellcey@mips.com>
 483
 484         * mips/basic.exp: Add mips*-mti-elf* target.
 485         * configure.ac: Add mips*-mti-elf* target.
 486         * configure: Regenerate.
 487
 488 2012-06-15  Joel Brobecker  <brobecker@adacore.com>
 489
 490         * configure: Regenerate.
 491
 492 2012-06-06  Michael Eager  <eager@eagercon.com>
 493
 494         * microblaze/interp.c (config.h): Add #include.
 495
 496 2011-11-29  Joel Brobecker  <brobecker@adacore.com>
 497
 498         * MAINTAINERS (Global Maintainers): New section.  Add Mike
 499         Frysinger.
 500
 501 2011-11-28  DJ Delorie  <dj@redhat.com>
 502
 503         * configure.tgt: Add rl78 support.
 504         * configure: Regenerate.
 505         * rl78: New directory.
 506         * MAINTAINERS: Add myself as RL78 maintainer.
 507
 508 2011-07-08  Hans-Peter Nilsson  <hp@axis.com>
 509
 510         * MAINTAINERS: Remove Thiemo Seufer.
 511
 512 2011-06-04  Mike Frysinger  <vapier@gentoo.org>
 513
 514         * configure.tgt (bfin-*-*): Add sim_testsuite=yes.
 515         * configure: Regenerate.
 516
 517 2011-05-04  Joseph Myers  <joseph@codesourcery.com>
 518
 519         * configure.tgt (thumb*-*-* | strongarm*-*-* | xscale-*-*): Don't
 520         handle targets.
 521         * configure: Regenerate.
 522
 523 2011-03-05  Mike Frysinger  <vapier@gentoo.org>
 524
 525         * MAINTAINERS: Add bfin entry.
 526         * configure.tgt (bfin-*-*): Handle bfin targets.
 527         * configure: Regenerate.
 528
 529 2011-01-05  Mike Frysinger  <vapier@gentoo.org>
 530
 531         * .gitignore: Add /*/hw-config.h.
 532
 533 2010-12-23  Mike Frysinger  <vapier@gentoo.org>
 534
 535         * .gitignore: New file.
 536
 537 2010-07-28  DJ Delorie  <dj@redhat.com>
 538
 539         * MAINTAINERS: Add self as RX maintainer.  Sort list.
 540
 541 2010-06-08  Nick Clifton  <nickc@redhat.com>
 542
 543         * reg.c (set_oszc): Use unsigned int for the mask.
 544         (set_szc, set_osz, set_sz): Likewise.
 545
 546 2010-04-26  Mike Frysinger  <vapier@gentoo.org>
 547
 548         * configure.ac: Target logic moved out to and included from ...
 549         * configure.tgt: ... this new file.
 550         * configure: Regenerated.
 551
 552 2010-04-12  Mike Frysinger  <vapier@gentoo.org>
 553
 554         * README-HACKING: Add more sections.
 555
 556 2010-02-11  Doug Evans  <dje@sebabeach.org>
 557
 558         * cris/cpuv10.h, * cris/cpuv32.h, * cris/cris-desc.c,
 559         * cris/cris-desc.h, * cris/decodev10.c, * cris/decodev32.c,
 560         * cris/modelv10.c, * cris/modelv32.c, * cris/semcrisv10f-switch.c,
 561         * cris/semcrisv32f-switch.c: Regenerate.
 562
 563 2010-01-09  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
 564
 565         * avr/configure: Regenerate.
 566         * cris/configure: Regenerate.
 567         * microblaze/configure: Regenerate.
 568
 569 2010-01-02  Doug Evans  <dje@sebabeach.org>
 570
 571         * cris/arch.c, * cris/arch.h, * cris/cpuall.h, * cris/cpuv10.c,
 572         * cris/cpuv10.h, * cris/cpuv32.c, * cris/cpuv32.h, * cris/cris-desc.c,
 573         * cris/cris-desc.h, * cris/cris-opc.h, * cris/decodev10.c,
 574         * cris/decodev10.h, * cris/decodev32.c, * cris/decodev32.h,
 575         * cris/modelv10.c, * cris/modelv32.c, * cris/semcrisv10f-switch.c,
 576         * cris/semcrisv32f-switch.c: Regenerate, update copyright year.
 577
 578 2010-01-01  Doug Evans  <dje@sebabeach.org>
 579
 580         * cris/mloop.in: Fix copyright year update snafu.
 581
 582 2009-11-24  Joel Brobecker  <brobecker@adacore.com>
 583
 584         * common/aclocal.m4: Add include of ../../config/zlib.m4.
 585         * common/common.m4: Use AM_ZLIB to check for zlib support.
 586         * ppc/configure.ac: Likewise.
 587         * arm/configure, avr/configure, common/configure, cr16/configure,
 588         cris/configure, d10v/configure, erc32/configure, frv/configure,
 589         h8300/configure, iq2000/configure, lm32/configure, m32c/configure,
 590         m32r/configure, m68hc11/configure, mcore/configure,
 591         microblaze/configure, mips/configure, mn10300/configure,
 592         moxie/configure, ppc/configure, sh/configure, sh64/configure,
 593         v850/configure: Regenerate.
 594
 595 2009-11-24  DJ Delorie  <dj@redhat.com>
 596
 597         * rx: New directory.
 598         * configure.ac: Add entry for Renesas RX.
 599         * configure: Regenerate.
 600
 601 2009-11-22  Doug Evans  <dje@sebabeach.org>
 602
 603         * cris/cpuall.h: Regenerate.
 604         * cris/cpuv10.h: Regenerate.
 605         * cris/cpuv32.h: Regenerate.
 606         * cris/decodev10.c: Regenerate.
 607         * cris/decodev10.h: Regenerate.
 608         * cris/decodev32.c: Regenerate.
 609         * cris/decodev32.h: Regenerate.
 610
 611 2009-11-12  Tristan Gingold  <gingold@adacore.com>
 612
 613         * avr/interp.c (sim_write): Allow byte access.
 614         (sim_read): Ditto.
 615
 616 2009-11-12  Tristan Gingold  <gingold@adacore.com>
 617
 618         * avr/interp.c (sim_load): Clear memory before loading.
 619
 620 2009-11-09  Tristan Gingold  <gingold@adacore.com>
 621
 622         * avr/interp.c (sim_resume): Fix typo for OP_ret.
 623
 624 2009-10-23  Doug Evans  <dje@sebabeach.org>
 625
 626         * cris/arch.c: Regenerate.
 627         * cris/arch.h: Regenerate.
 628         * cris/cpuall.h: Regenerate.
 629         * cris/cpuv10.c: Regenerate.
 630         * cris/cpuv10.h: Regenerate.
 631         * cris/cpuv32.c: Regenerate.
 632         * cris/cpuv32.h: Regenerate.
 633         * cris/cris-desc.c: Regenerate.
 634         * cris/cris-desc.h: Regenerate.
 635         * cris/cris-opc.h: Regenerate.
 636         * cris/decodev10.c: Regenerate.
 637         * cris/decodev10.h: Regenerate.
 638         * cris/decodev32.c: Regenerate.
 639         * cris/decodev32.h: Regenerate.
 640         * cris/modelv10.c: Regenerate.
 641         * cris/modelv32.c: Regenerate.
 642         * cris/semcrisv10f-switch.c: Regenerate.
 643         * cris/semcrisv32f-switch.c: Regenerate.
 644
 645 2009-10-22  Tristan Gingold  <gingold@adacore.com>
 646
 647         * avr/interp.c (sim_stop): Return 1.
 648
 649 2009-10-16  Doug Evans  <dje@sebabeach.org>
 650
 651         * MAINTAINERS: Add myself as m32r maintainer.
 652
 653 2009-10-15  Michael Egaer  <eager@eagercon.com>
 654
 655         * MAINTAINERS: Add self as MicroBlaze maintainer.
 656
 657 2009-10-14  Ben Elliston  <bje@gnu.org>
 658
 659         * MAINTAINERS (common): Move myself to "past maintainers" section.
 660
 661 2009-10-06  Michael Eager  <eager@eagercon.com>
 662
 663         * microblaze/interp.c: Add include microblaze-dis.h.
 664
 665 2009-09-23  Michael Eager  <eager@eagercon.com>
 666
 667         * configure: Add microblaze-*.* (not regenerated).
 668         * configure.ac: Likewise.
 669         * microblaze/config.in: New.
 670         * microblaze/configure: Generate.
 671         * microblaze/configure.ac: New.
 672         * microblaze/interp.c: New.
 673         * microblaze/Makefile.in: New.
 674         * microblaze/microblaze.h: New.
 675         * microblaze/microblaze.isa: New.
 676         * microblaze/sim-main.h: New.
 677         * microblaze/sysdep.h: New.
 678
 679 2009-08-22  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
 680
 681         * avr/config.in: Regenerate.
 682         * avr/configure: Likewise.
 683         * configure: Likewise.
 684         * cris/config.in: Likewise.
 685         * cris/configure: Likewise.
 686
 687         * configure.ac: m4_include toplevel config/override.m4.
 688         * configure: Regenerate.
 689         * avr/configure: Regenerate.
 690         * cris/configure: Regenerate.
 691
 692 2009-07-30  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
 693
 694         * Makefile.in (datarootdir): New variable.
 695
 696 2009-05-18  Jon Beniston <jon@beniston.com>
 697
 698         * MAINTAINERS: Add Jon Beniston as maintainer of lm32 sim.
 699         * configure.ac: Add lm32 target.
 700         * lm32: New directory.
 701
 702 2009-05-11  Andrew Cagney  <cagney@gnu.org>
 703
 704         * MAINTAINERS: Orphan ppc.
 705
 706 2009-05-08  Kevin Buettner  <kevinb@redhat.com>
 707
 708         * m32c/gdb-if.c (m32c_signal_to_host): Rename to
 709         m32c_signal_to_target.  Change signal return values from SIGILL,
 710         SIGTRAP, SIGSEGV, etc. to TARGET_SIGNAL_ILL, TARGET_SIGNAL_TRAP,
 711         TARGET_SIGNAL_SEGV, etc.  Fix all callers.
 712
 713 2009-04-30  Anthony Green  <green@moxielogic.com>
 714
 715         * MAINTAINERS: Add myself for the moxie port.
 716         * moxie: New directory.
 717         * configure.ac: Add entry for moxie.
 718         * configure: Regenerate.
 719
 720 2009-04-27  Tristan Gingold  <gingold@adacore.com>
 721
 722         * avr: New directory.
 723         * avr/interp.c, avr/Makefile.in, avr/configure.ac: New files.
 724         * avr/config.in: New file, generated by autoheader.
 725         * avr/configure: New file generated by autoconf.
 726         * configure.ac: Add avr.
 727         * configure: Regenerated.
 728
 729 2009-04-17  Carlos O'Donell  <carlos@codesourcery.com>
 730
 731         * Makefile.in: Add dummy install-pdf, html, and
 732         install-html targets.
 733
 734 2009-01-18  Hans-Peter Nilsson  <hp@axis.com>
 735
 736         * cris/sim-if.c: Include errno.h.
 737         (cris_start_address, cris_program_offset): New variables.
 738         (OPTION_CRIS_PROGRAM_OFFSET, OPTION_CRIS_STARTADDR): New option
 739         enums.
 740         (cris_options): New options --cris-program-offset and
 741         --cris-start-address.
 742         (cris_option_handler): Handle new options.
 743         (cris_program_offset_write, cris_set_section_offset_iterator)
 744         (cris_offset_sections, cris_offset_sections): New functions.
 745         (sim_load): Use cris_program_offset_write as function argument to
 746         cris_load_elf_file, not sim_write.
 747         (struct offsetinfo): New struct.
 748         (cris_handle_interpreter): Fix typo in comment.
 749         (sim_open): Call cris_offset_sections as soon as the bfd of the
 750         infile is available.  Gate bfd validity checks on abfd non-NULL.
 751         (sim_create_inferior): Let cris_start_address when != -1 override
 752         other start-address choices.
 753
 754 2009-01-06  Hans-Peter Nilsson  <hp@axis.com>
 755
 756         * cris/traps.c (abort): Define to call sim_io_error.
 757         (create_map): Make -1 imply a non-fixed address, not 0.  All
 758         callers changed.  Only prefer the next higher unmapped address if
 759         the last mapped address is no less than 0x40000000.  Check that
 760         the address to be mapped is not already mapped.  Update head
 761         comment.
 762         (unmap_pages): Don't call abort when recursive call fails, just
 763         note and return an error if a page in the range couldn't be unmapped.
 764         (cris_bmod_handler, h_supr_set_handler, h_supr_get_handler)
 765         (schedule, make_first_thread, cris_pipe_empty): New local variable sd.
 766         (cris_break_13_handler) <case TARGET_SYS_mmap2>: Handle
 767         non-MAP_FIXED argument overlapping existing map.  For MAP_FIXED,
 768         don't abort on page not being mapped.  Handle non-anon filemap
 769         with length padded to pagesize.
 770
 771 2009-01-03  Hans-Peter Nilsson  <hp@axis.com>
 772
 773         * cris/sim-if.c (TARGET_AT_NULL, TARGET_AT_PHDR, TARGET_AT_PHENT)
 774         (TARGET_AT_PHNUM, TARGET_AT_PAGESZ, TARGET_AT_BASE)
 775         (TARGET_AT_FLAGS, TARGET_AT_ENTRY, TARGET_AT_UID, TARGET_AT_EUID)
 776         (TARGET_AT_GID, TARGET_AT_EGID, TARGET_AT_HWCAP)
 777         (TARGET_AT_CLKTCK): Remove redundant macros.
 778         (AUX_ENT): Adjust to use standard ELF AT_* macros.
 779         (AUX_ENTF): Ditto.  Remove always-0 middle argument.  Update all
 780         callers.
 781         (sim_open): Also pass AT_SECURE.
 782
 783         * cris/sim-main.h (struct _sim_cpu): New member
 784         set_target_thread_data.
 785         * cris/crisv32f.c (CRIS_TLS_REGISTER): Define.
 786         * cris/crisv10f.c: Ditto.
 787         * cris/cris-tmpl.c (MY (set_target_thread_data)): New function.
 788         (MY (f_specific_init)): Set new _sim_cpu member to new function.
 789         * cris/traps.c (TARGET_SYS_set_thread_area): Define.
 790         (cris_break_13_handler) <case TARGET_SYS_set_thread_area>: New
 791         case.
 792
 793         * cris/traps.c (TARGET_SYS_exit_group): Define.
 794         (cris_break_13_handler): Handle it like the exit for the last
 795         thread.
 796
 797         * cris/traps.c (TARGET_UTSNAME): Update to 2009-01-01.
 798         (TARGET_EPOCH): Update to match TARGET_UTSNAME.  Correct comment.
 799         (cris_break_13_handler) <case TARGET_SYS_uname>: Update to
 800         2.6.27.  Set machine field to the BFD printable name of the
 801         machine.
 802
 803         * cris/traps.c (TARGET_MAP_DENYWRITE): Define.
 804         (cris_break_13_handler) <case TARGET_SYS_mmap2>: Handle
 805         TARGET_MAP_DENYWRITE.
 806
 807         * cris/traps.c (TARGET_SYS_access, TARGET_R_OK, TARGET_W_OK)
 808         (TARGET_X_OK, TARGET_F_OK): Define.
 809         (cris_break_13_handler) <case TARGET_SYS_access>: New case.
 810
 811         * cris/semcrisv32f-switch.c: Regenerate.
 812
 813 2008-12-30  Hans-Peter Nilsson  <hp@axis.com>
 814
 815         * cris/sim-if.c (sim_open): If sim_analyze_program fails, emit
 816         just a short CRIS-specific notice.  Tweak the wording for a
 817         failing architecture test.
 818
 819         * cris/traps.c (TARGET_SYS_writev): New macro.
 820         (is_mapped_only, cris_dump_map): New functions.
 821         (cris_break_13_handler) <case TARGET_SYS_mmap2>: Handle more flags
 822         and prot combinations and a non-zero page-offset.  If
 823         TARGET_MAP_FIXED, unmap pages before mapping them.
 824         <case TARGET_SYS_mprotect>: When checking, allow any length
 825         argument.  Don't actually do anything.
 826         <case TARGET_SYS_writev>: New case.
 827
 828         * cris/Makefile.in (SIM_OBJS): Remove sim-hload.o.
 829         * cris/sim-if.c: Include elf-bfd.h.
 830         (struct progbounds): New members end_loadmem, start_nonloadmem.
 831         (xprintf, eprintf): New functions, copied from common/sim-load.c.
 832         (cris_load_elf_file, sim_load, cris_get_progbounds): New functions.
 833         (get_progbounds_iterator): Renamed from get_progbounds.  Make
 834         static.  Update head comment.  Set new struct progbounds members.
 835         (exec_load_addr, interp_load_addr, interp_start_addr): New static
 836         variables.
 837         (aux_ent_phdr, aux_ent_phent, aux_ent_phnum, aux_ent_base)
 838         (aux_ent_entry, cris_write_interp, cris_handle_interpreter): New
 839         functions.
 840         (sim_open): New constant array auxv_entries.  Rewrite AUX_ENT
 841         handling to use auxv_entries.  Improve error message and checking
 842         for invalid programs.  Use new variable abfd for the program
 843         instead of for each access reaching into sd to get it.
 844         (sim_create_inferior): If non-zero, use interp_start_addr instead
 845         of the program start address.
 846         (cris_disassemble_insn): Remove incorrect and unclear, supposedly
 847         stale comment.  Always specify little-endian.
 848
 849 2008-07-29  Nick Clifton  <nickc@redhat.com>
 850
 851         * common/genmloop.sh: Add new parameter: -shell to specify the
 852         command interpreter to use to run the input file.  This is
 853         necessary because otherwise SHELL is taken from the user's
 854         environment, and not from the makefile that invoked this script
 855         and the user might not be running an sh-like shell.
 856         * cris/Makefile.in: Pass -shell parameter to genmloop.sh.
 857         * fr30/Makefile.in: Likewise.
 858         * frv/Makefile.in: Likewise.
 859         * i960/Makefile.in: Likewise.
 860         * iq2000/Makefile.in: Likewise.
 861         * m32r/Makefile.in: Likewise.
 862
 863         * frv/mloop.in: Add missing start of line comment marker.
 864
 865 2008-07-11  Hans-Peter Nilsson  <hp@axis.com>
 866
 867         * cris/configure: Regenerate to track ../common/common.m4 changes.
 868         * cris/config.in: Ditto.
 869
 870 2008-06-06  Vladimir Prus  <vladimir@codesourcery.com>
 871             Daniel Jacobowitz  <dan@codesourcery.com>
 872             Joseph Myers  <joseph@codesourcery.com>
 873
 874         * cris/configure: Regenerate.
 875
 876 2008-05-09  Olivier Hainque  <hainque@adacore.com>
 877
 878         * ppc/altivec.igen (vperm): Latch inputs into temporaries.
 879
 880 2008-03-25  M R Swami Reddy <MR.Swami.Reddy@nsc.com>
 881
 882         * MAINTAINERS: Add myself as maintainer of cr16 port.
 883
 884 2008-02-12  M Ranga Swami Reddy <MR.Swami.Reddy@nsc.com>
 885
 886         Add simulator for National cr16 processor.
 887         * cr16: New directory.
 888         * configure.ac: Add entry for National cr16.
 889         * configure: Regenerate.
 890
 891 2008-02-05  DJ Delorie  <dj@redhat.com>
 892
 893         * configure.ac (v850): V850 now has a testsuite.
 894         * configure (v850): Likewise.
 895
 896 2008-01-01  Daniel Jacobowitz  <dan@codesourcery.com>
 897
 898         Updated copyright notices for most files.
 899
 900 2007-12-19  DJ Delorie  <dj@redhat.com>
 901
 902         * frv/frv.c (frvbf_cut): Only look at the six LSBs of
 903         cut_point.
 904
 905 2007-10-22  Hans-Peter Nilsson  <hp@axis.com>
 906
 907         * cris/arch.c, cris/arch.h, cris/cpuall.h, cris/cpuv10.c,
 908         cris/cpuv10.h, cris/cpuv32.c, cris/cpuv32.h, cris/cris-desc.c,
 909         cris/cris-desc.h, cris/cris-opc.h, cris/decodev10.c,
 910         cris/decodev10.h, cris/decodev32.c, cris/decodev32.h,
 911         cris/modelv10.c, cris/modelv32.c, cris/semcrisv10f-switch.c,
 912         cris/semcrisv32f-switch.c: Regenerate.
 913
 914 2007-08-24  Joel Brobecker  <brobecker@adacore.com>
 915
 916         Switch the license of all files explicitly copyright the FSF
 917         to GPLv3.
 918
 919 2007-03-27  Brooks Moses  <brooks.moses@codesourcery.com>
 920
 921         * Makefile.in: Add dummy "pdf" target.
 922
 923 2007-02-20  Hans-Peter Nilsson  <hp@axis.com>
 924
 925         * cris/traps.c (dump_statistics): Change format for cycle numbers
 926         to %llu and cast parameters to unsigned long long.
 927
 928 2007-02-16  Thiemo Seufer  <ths@mips.com>
 929
 930         * Makefile.in (FLAGS_TO_PASS, TARGET_FLAGS_TO_PASS): Add RUNTEST.
 931
 932 2007-01-28  Manuel Lauss  <slauss@resi.at>
 933
 934         * configure.ac (sh64-*-*): Change to sh64*-*-*.
 935         (sh-*-*): Change to sh*-*-*.
 936         * configure: Regenerated.
 937
 938 2007-01-09  Daniel Jacobowitz  <dan@codesourcery.com>
 939
 940         Updated copyright notices for most files.
 941
 942 2006-12-20  Hans-Peter Nilsson  <hp@axis.com>
 943
 944         * Makefile.in (autoconf-common autoheader-common): Only run
 945         autoheader on subdirs with a file config.in.
 946
 947         * configure.ac (common): Make the default "yes" for all targets
 948         with sim subdirs.
 949         * configure: Regenerate.
 950
 951         * Makefile.in (autoconf-common autoheader-common): In documented
 952         usage, say SHELL=/bin/sh.
 953         (.PHONY): Add autoheader-common.
 954
 955         * MAINTAINERS: Add self as authorized committer for *.
 956
 957 2006-10-02  Edgar E. Iglesias  <edgar@axis.com>
 958             Hans-Peter Nilsson  <hp@axis.com>
 959
 960         * cris/cris-sim.h (enum cris_unknown_syscall_action_type)
 961         (cris_unknown_syscall_action): Declare.
 962         * cris/sim-if.c (cris_unknown_syscall_action): Define.
 963         (cris_options): Add cris-unknown-syscall option.
 964         (cris_option_handler): Correct comment about and error message for
 965         invalid --cris-cycles argument.  Handle --cris-unknown-syscall.
 966         * cris/traps.c: Include stdarg.h
 967         (cris_unknown_syscall): New function.
 968         (cris_break_13_handler): Instead of sim_io_eprintf and
 969         sim_engine_halt, call cris_unknown_syscall to handle more or less
 970         unknown syscalls.  Adjust code as necessary to handle return
 971         value.
 972
 973 2006-09-30  Daniel Jacobowitz  <dan@codesourcery.com>
 974
 975         * MAINTAINERS: Add Dave Brolley for sh64.
 976
 977 2006-09-30  Hans-Peter Nilsson  <hp@axis.com>
 978
 979         * cris/traps.c (TARGET_PIPE_BUF): New macro.
 980         (cris_pipe_empty): Correct initialization of "remaining".  Only
 981         adjust the "write" return value if more than TARGET_PIPE_BUF bytes
 982         are written.
 983
 984 2006-09-29  Hans-Peter Nilsson  <hp@axis.com>
 985
 986         * cris/configure.ac: Check for limits.h and sys/param.h.
 987         * cris/configure, cris/config.in: Rebuild.
 988         * cris/traps.c (SIM_PATHMAX): New macro.
 989         (cris_break_13_handler): Use SIM_PATHMAX, not MAXPATHLEN.
 990
 991 2006-08-08  Joel Sherrill <joel.sherrill@oarcorp.com>
 992
 993         * configure.ac (sparc-*-rtems*|sparc-*-elf*): Enable erc32 simulator.
 994         * Makefile.in (FLAGS_TO_PASS): Include libdir.
 995         * configure: Regenerated.
 996
 997 2006-06-05  Daniel Jacobowitz  <dan@codesourcery.com>
 998
 999         * cris/configure: Regenerated.
1000
1001 2006-05-31  Daniel Jacobowitz  <dan@codesourcery.com>
1002
1003         * cris/configure: Regenerated.
1004
1005 2006-05-05  Andreas Schwab  <schwab@suse.de>
1006
1007         * configure.ac (CFLAGS_FOR_BUILD): Set and substitute.
1008         * configure: Regenerate.
1009
1010         * Makefile.in (CFLAGS_FOR_BUILD): Define.
1011         (CC_FOR_BUILD): Don't override.
1012         (FLAGS_TO_PASS): Pass CFLAGS_FOR_BUILD.
1013
1014 2006-05-04  Daniel Jacobowitz  <dan@codesourcery.com>
1015
1016         * MAINTAINERS: Add an "Authorized committers" section, and list
1017         DJ Delorie for v850.
1018
1019 2006-04-08  Hans-Peter Nilsson  <hp@axis.com>
1020
1021         * cris/crisv32f.c (MY (deliver_interrupt)): Set CCS to new_ccs.
1022
1023 2006-04-03  Hans-Peter Nilsson  <hp@axis.com>
1024
1025         * cris/dv-cris.c, cris/dv-rv.c, cris/rvdummy.c: New files.
1026         * cris/Makefile.in (CONFIG_DEVICES): Remove redundant setting.
1027         (dv-cris.o, dv-rv.o rvdummy$(EXEEXT), rvdummy.o): New rules.
1028         (all): Depend on rvdummy$(EXEEXT).
1029         * cris/configure.ac: Call SIM_AC_OPTION_WARNINGS.  Check for
1030         sys/socket.h and sys/select.h.  Call SIM_AC_OPTION_HARDWARE,
1031         default off.
1032         * cris/configure: Regenerate.
1033         * cris/cris-sim.h (cris_have_900000xxif): Declare here.
1034         (enum cris_interrupt_type, crisv10deliver_interrupt)
1035         (crisv32deliver_interrupt: New declarations.
1036         * cris/cris-tmpl.c [WITH_HW] (MY (f_model_insn_after)): Call
1037         sim_events_tickn and set state-events member work_pending when it's
1038         time for the next event.
1039         [WITH_HW] (MY (f_specific_init)): Set CPU-model-specific
1040         interrupt-delivery function.
1041         * cris/crisv10f.c (MY (deliver_interrupt)): New function.
1042         * cris/crisv32f.c (MY (deliver_interrupt)): New function.
1043         * cris/devices.c: Include hw-device.h.
1044         (device_io_read_buffer) [WITH_HW]: Call hw_io_read_buffer.
1045         (device_io_write_buffer): Only perform 0x900000xx-functions if
1046         cris_have_900000xxif is nonzero.  Else if WITH_HW defined,
1047         call hw_io_write_buffer.  Add return 0 last in function.
1048         * cris/sim-if.c (cris_have_900000xxif): Now global.
1049         (sim_open) [WITH_HW]: Clear deliver_interrupt cpu member.
1050         Force "-model" option, effectively.
1051         * cris/sim-main.h (cris_interrupt_delivery_fn): New type.
1052         (struct _sim_cpu) [WITH_HW]: New member deliver_interrupt.
1053
1054 2006-04-02  Hans-Peter Nilsson  <hp@axis.com>
1055
1056         * cris/Makefile.in (CRISV10F_OBJS): Remove semcrisv10f-switch.o.
1057         (CRISV32F_OBJS): Remove semcrisv32f-switch.o.
1058         (semcrisv10f-switch.o, semcrisv32f-switch.o: Remove dependency rules.
1059
1060 2006-03-13  DJ Delorie  <dj@redhat.com>
1061
1062         * MAINTAINERS: Add self as m32c sim maintainer.
1063
1064 2006-02-23  Hans-Peter Nilsson  <hp@axis.com>
1065
1066         * cris/traps.c (syscall_map): Remove CB_SYS_time / TARGET_SYS_time
1067         mapping.
1068         (cris_break_13_handler) <case TARGET_SYS_time>: New case.
1069
1070 2006-01-23  Jim Blandy  <jimb@redhat.com>
1071
1072         Add simulator for Renesas M32C and M16C.
1073
1074         * m32c: New directory.
1075         * configure.ac: Add entry for Renesas M32C.
1076         * configure: Regenerate.
1077
1078 2006-01-10  Hans-Peter Nilsson  <hp@axis.com>
1079
1080         * cris/cris-tmpl.c (MY (f_model_insn_before)): Only display basic
1081         cycle count for the current insn.
1082
1083 2005-12-06  Hans-Peter Nilsson  <hp@axis.com>
1084
1085         * cris/cpuv10.h, cris/cpuv32.h, cris/cris-desc.c, cris/cris-opc.h,
1086         cris/decodev10.c, cris/decodev10.h, cris/decodev32.c,
1087         cris/decodev32.h, cris/modelv10.c, cris/modelv32.c,
1088         cris/semcrisv10f-switch.c, cris/semcrisv32f-switch.c: Regenerate.
1089
1090 2005-12-05  Hans-Peter Nilsson  <hp@axis.com>
1091
1092         * cris/arch.c, cris/arch.h, cris/cpuall.h, cris/cpuv10.c,
1093         cris/cpuv10.h, cris/cpuv32.c, cris/cpuv32.h, cris/cris-desc.c,
1094         cris/cris-desc.h, cris/cris-opc.h, cris/decodev10.c,
1095         cris/decodev10.h, cris/decodev32.c, cris/decodev32.h,
1096         cris/modelv10.c, cris/modelv32.c, cris/semcrisv10f-switch.c,
1097         cris/semcrisv32f-switch.c: Regenerate.
1098
1099 2005-11-20  Hans-Peter Nilsson  <hp@axis.com>
1100
1101         * cris/traps.c (TARGET_O_RDONLY, TARGET_O_WRONLY): Define.
1102         (open_map): Use TARGET_O_ACCMODE, TARGET_O_RDONLY and
1103         TARGET_O_WRONLY.
1104         (cris_break_13_handler) <case TARGET_SYS_fcntl>: Add support for
1105         F_GETFL on fd 0, 1 and 2.
1106
1107 2005-11-17  Hans-Peter Nilsson  <hp@axis.com>
1108
1109         * cris/sim-main.h (struct _sim_cpu): New members last_syscall,
1110         last_open_fd, last_open_flags.
1111         * cris/traps.c: Don't include targ-vals.h.
1112         (TARGET_O_ACCMODE): Define.
1113         (cris_break_13_handler): Set new _sim_cpu members.
1114         <case TARGET_SYS_fcntl>: Support special case of F_GETFL.
1115         Rearrange code as switch.  Emit "unimplemented" abort for
1116         unimplemented fcntl calls.
1117
1118         * cris/traps.c (TARGET_SYS_stat): Define.
1119         (syscall_stat32_map): Add entry for TARGET_SYS_stat.
1120         (cris_break_13_handler) <case TARGET_SYS_stat>: New case.
1121
1122 2005-11-16  Hans-Peter Nilsson  <hp@axis.com>
1123
1124         * cris/cris-tmpl.c (MY (f_model_insn_before)): Make sure only the
1125         low 32 bits are used after an unsigned long cast.
1126
1127 2005-05-28  Hans-Peter Nilsson  <hp@axis.com>
1128
1129         * cris/Makefile.in (stamp-v32fmloop): Depend on stamp-v10fmloop.
1130
1131 2005-05-26  Chris Demetriou  <cgd@netbsd.org>
1132
1133         * MAINTAINERS: Update my mail address, move myself to the
1134         "Past maintainers" section.
1135
1136 2005-05-17  Corinna Vinschen  <vinschen@redhat.com>
1137
1138         * configure.ac: Add igen to v850 build.
1139         * configure: Regenerate.
1140
1141 2005-04-29  Paul Brook  <paul@codesourcery.com>
1142
1143         * common/callback.c (PIPE_BUF): Provide default definition.
1144         (os_lstat): Use stat if lstat is not available on the host.
1145         (os_ftruncate): Return EINVAL if not available on the host.
1146         (os_truncate): Ditto.
1147         * common/configure.ac: Check for lstat, truncate and ftruncate.
1148         * common/configure: Regenerate.
1149         * common/config.in: Regenerate.
1150
1151 2005-04-27  Paul Brook  <paul@codesourcery.com>
1152
1153         * common/Make-common.in: Add $(EXEEXT) to "run".
1154
1155 2005-04-18  Hans-Peter Nilsson  <hp@axis.com>
1156
1157         * cris/traps.c (cris_break_13_handler) <case TARGET_SYS_mmap2>:
1158         For ((len & 8191) != 0 && fd == (USI) -1), don't say this isn't
1159         implemented.  In call to create_map, pad length argument to 8k.
1160
1161 2005-04-15  Corinna Vinschen  <vinschen@redhat.com>
1162
1163         * configure.ac: Add explicit sh64 case.
1164         * configure: Regenerate.
1165
1166 2005-03-30  Paul Brook  <paul@codesourcery.com>
1167
1168         * arm/wrapper.c: Provide SIGTRAP and SIGBUS.
1169
1170 2005-03-24  Hans-Peter Nilsson  <hp@axis.com>
1171
1172         * cris/Makefile.in (stamp-v10fcpu, stamp-v32fcpu): Add kludge to
1173         include cgen-ops.h in decodev10.c and decodev32.c.
1174         * cris/sim-main.h: Don't include cgen-ops.h here.
1175         * cris/arch.c, cris/arch.h, cris/cpuall.h, cris/cpuv10.c,
1176         cris/cpuv10.h, cris/cpuv32.c, cris/cpuv32.h, cris/cris-desc.c,
1177         cris/cris-desc.h, cris/cris-opc.h, cris/decodev10.c,
1178         cris/decodev10.h, cris/decodev32.c, cris/decodev32.h,
1179         cris/modelv10.c, cris/modelv32.c, cris/semcrisv10f-switch.c,
1180         cris/semcrisv32f-switch.c: Regenerate.
1181
1182         * cris/traps.c (cris_break_13_handler) <case
1183         TARGET_SYS_rt_sigaction>: Rename sa_handler, sa_flags,
1184         sa_restorer, sa_mask_low, sa_mask_high to target_sa_handler etc.
1185
1186 2005-03-23  Mark Kettenis  <kettenis@gnu.org>
1187
1188         * cris/configure: Regenerate.
1189
1190 2005-02-28  Jim Blandy  <jimb@redhat.com>
1191
1192         * d10v/configure.ac, igen/configure.ac, m68hc11/configure.ac,
1193         mips/configure.ac, mn10300/configure.ac, v850/configure.ac:
1194         Regenerated, after change to common/aclocal.m4.
1195
1196 2005-02-18  Corinna Vinschen  <vinschen@redhat.com>
1197
1198         * iq2000: New target subdirectory.
1199         * configure.ac: Add iq2000 target.
1200         * configure: Regenerate.
1201
1202 2005-01-29  Hans-Peter Nilsson  <hp@axis.com>
1203
1204         * Makefile.in (all, clean mostlyclean, distclean maintainer-clean)
1205         (realclean, install): Fail if subdir make failed.
1206
1207 2005-01-28  Hans-Peter Nilsson  <hp@axis.com>
1208
1209         * cris: New directory, simulator for Axis Communications CRIS
1210         including CRIS v32, CGEN-based.
1211         * configure.ac: Add corresponding configury.
1212         * configure: Regenerate.
1213
1214 2005-01-17  Andrew Cagney  <cagney@gnu.org>
1215
1216         * configure.ac: For mips*-*-* and mn10300*-*-* configure the
1217         common directory.  Remove sparc*-*-* from list.
1218
1219 2005-01-11  Andrew Cagney  <cagney@gnu.org>
1220
1221         * Makefile.in (autoconf-common autoheader-common): Add --force to
1222         autoconf and autoheader.
1223         (autoconf-common autoheader-common)
1224         (autoconf-install autoheader-install): Check for configure.ac, not
1225         configure.in.
1226         * configure.ac: Delete AC_CONFIG_AUX_DIR.
1227         * configure: Re-generate.
1228
1229 2005-01-07  Andrew Cagney  <cagney@gnu.org>
1230
1231         * configure.ac: Replace configure.in.  Requires autoconf 2.59 and
1232         correctly calls AC_CONFIG_SUBDIRS.
1233         * configure: Re-generate.
1234
1235 2004-12-01  Andrew Cagney  <cagney@gnu.org>
1236
1237         * i960, h8500: Delete directory.
1238
1239 2004-11-12  Andrew Cagney  <cagney@gnu.org>
1240
1241         * d30v, fr30, mn10200, z8k: Delete directory.
1242
1243 2004-03-10  Ben Elliston  <bje@gnu.org>
1244
1245         * MAINTAINERS: Update my mail address.
1246
1247 2004-01-26  Chris Demetriou  <cgd@broadcom.com>
1248
1249         * configure.in (mips*-*-*): Configure in testsuite.
1250         * configure: Regenerate.
1251
1252 2003-10-08  Dave Brolley  <brolley@redhat.com>
1253
1254         * configure.in: Move frv handling to alphabetically correct placement.
1255
1256 2003-09-03  Andreas Schwab  <schwab@suse.de>
1257
1258         * Makefile.in (FLAGS_TO_PASS): Pass down $(bindir) and $(mandir).
1259
1260 2003-08-29  Dave Brolley  <brolley@redhat.com>
1261
1262         * MAINTAINERS: Add myself as maintainer of the FRV port.
1263
1264 2003-08-20  Michael Snyder  <msnyder@redhat.com>
1265             Dave Brolley  <brolley@redhat.com>
1266
1267         * frv/: New directory, simulator for the Fujitsu FRV.
1268         * configure.in: Add frv configury.
1269         * configure: Regenerate.
1270
1271 2003-08-10  Ben Elliston  <bje@wasabisystems.com>
1272
1273         * MAINTAINERS: Update my mail address.
1274
1275 2003-08-09  Andrew Cagney  <cagney@redhat.com>
1276
1277         * MAINTAINERS: Andrew Cagney (mips) and Geoff Keating (ppc) drop
1278         maintenance.  List igen and sh maintainers.  Mention that target
1279         and global maintainers pick up the slack.
1280
1281 2003-07-09  Michael Snyder  <msnyder@redhat.com>
1282
1283         * configure.in: Add testsuite to extra_subdirs for sh.
1284         * configure: Regenerate.
1285
1286 2003-01-23  Nick Clifton  <nickc@redhat.com>
1287
1288         * Add sh2e support:
1289
1290 2002-04-02  Alexandre Oliva  <aoliva@redhat.com>
1291
1292         * sh/gencode.c: Replace sh3e with sh2e except in fsqrt.
1293
1294 2002-08-24  Geoffrey Keating  <geoffk@redhat.com>
1295
1296         * MAINTAINERS: Update my email address.
1297
1298 2002-07-17  Andrew Cagney  <ac131313@redhat.com>
1299
1300         * w65/: Delete directory.
1301
1302 2002-07-16  Andrew Cagney  <ac131313@redhat.com>
1303
1304         * configure.in (extra_subdirs): Mark fr30-*-* as obsolete.
1305         * configure: Re-generate.
1306
1307 2002-07-13  Andrew Cagney  <ac131313@redhat.com>
1308
1309         * configure.in (extra_subdirs): Mark d30v-*-* as obsolete.
1310         * configure: Re-generate.
1311
1312 2002-06-16  Andrew Cagney  <ac131313@redhat.com>
1313
1314         * Makefile.in (autoconf-changelog autoheader-changelog): Let name,
1315         id, date and host to be overriden by NAME, ID, DATE and HOST
1316         respectfully.  Use ISO dates.
1317
1318 Thu Jun  6 12:34:13 2002  Andrew Cagney  <cagney@redhat.com>
1319
1320         * Makefile.in (ChangeLog): New makefile variable.
1321         * README-HACKING: Mention the ChangeLog makefile variable.
1322
1323 2002-06-01  Andrew Cagney  <ac131313@redhat.com>
1324
1325         * tic80/: Delete directory.
1326
1327 2002-05-16  Stephane Carrez  <stcarrez@nerim.fr>
1328
1329         * MAINTAINERS: Update my email address.
1330
1331 2002-03-06  Stephane Carrez  <Stephane.Carrez@worldnet.fr>
1332
1333         * MAINTAINERS: Record self as maintainer of m68hc11 simulator.
1334
1335 2002-03-01  Frank Ch. Eigler  <fche@redhat.com>
1336
1337         * MAINTAINERS: Record self as a co-maintainer of just common/.
1338
1339 2002-02-07  Nick Clifton  <nickc@cambridge.redhat.com>
1340
1341         * MAINTAINERS: Point to GDB files describing overall maintaince
1342         and check-in procedures.
1343
1344 2002-01-10  Nick Clifton  <nickc@cambridge.redhat.com>
1345
1346         * MAINTAINERS: Add myself for ARM portions.
1347
1348 2001-10-19  Andrew Cagney  <ac131313@redhat.com>
1349
1350         * configure.in: When Linux or NetBSD, enable PowerPC simulator.
1351         * configure: Re-generate.
1352
1353 2001-02-16  Ben Elliston  <bje@redhat.com>
1354
1355         * MAINTAINERS: Add myself for common portions.
1356
1357 2001-01-15  Chris Demetriou  <cgd@broadcom.com>
1358
1359         * MAINTAINERS: Added self and Andrew for the mips sim.
1360
1361 2000-10-25  Geoff Keating  <geoffk@cygnus.com>
1362
1363         * MAINTAINERS: Added self and Andrew for the ppc sim.
1364
1365 Thu Jul 27 21:26:26 2000  Andrew Cagney  <cagney@b1.cygnus.com>
1366
1367         From Stephane Carrez <Stephane.Carrez@worldnet.fr>:
1368         * m68hc11: New directory.
1369         * configure.in: Add.
1370         * configure: Regenerate.
1371
1372 Tue Jul  4 13:43:54 2000  Andrew Cagney  <cagney@b1.cygnus.com>
1373
1374         * tic80: New directory.
1375         * configure.in: Add configury.
1376         * configure: Regenerate.
1377
1378 2000-04-20  Nick Clifton  <nickc@cygnus.com>
1379
1380         * configure.in (extra_subdirs): Add testsuite to strongarm
1381         directories.
1382         * configure: Regenerate.
1383
1384 Sat Mar  4 16:48:54 2000  Andrew Cagney  <cagney@b1.cygnus.com>
1385
1386         * MAINTAINERS: New file.  Blank.
1387
1388 1999-11-18  Ben Elliston  <bje@cygnus.com>
1389
1390         * configure.in: Require autoconf 2.13 and remove obsolete
1391         invocation of AC_C_CROSS.
1392         * configure: Regenerate.
1393
1394 1999-09-29  Doug Evans  <devans@casey.cygnus.com>
1395
1396         * configure.in: Configure the testsuite directory for thumb.
1397         * configure: Regenerate.
1398
1399 1999-07-16  Ben Elliston  <bje@cygnus.com>
1400
1401         * configure.in: Configure the testsuite directory for arm.
1402         * configure: Regenerate.
1403
1404 1999-04-08  Nick Clifton  <nickc@cygnus.com>
1405
1406         * configure.in: Add support for MCore target.
1407         * configure: Regenerate.
1408
1409 1999-03-14  Stan Shebs  <shebs@andros.cygnus.com>
1410
1411         * Makefile.in (FLAGS_TO_PASS, TARGET_FLAGS_TO_PASS): Remove
1412         RUNTEST instead of commenting out, fixes portability problem.
1413
1414 1999-02-08  Nick Clifton  <nickc@cygnus.com>
1415
1416         * configure.in: Add support for StrongARM target.
1417         * configure: Regenerate.
1418
1419 1999-01-04  Jason Molenda  (jsm@bugshack.cygnus.com)
1420
1421         * configure.in: Require autoconf 2.12.1 or higher.
1422
1423 1998-12-08  James E Wilson  <wilson@wilson-pc.cygnus.com>
1424
1425         * configure.in (i960-*-*): Add.
1426         * configure: Rebuild.
1427
1428 Wed Nov  4 19:11:43 1998  Dave Brolley  <brolley@cygnus.com>
1429
1430         * configure.in: Added case for fr30-*-*.
1431         * configure: Regenerated.
1432
1433 Fri Sep 25 10:12:19 1998  Christopher Faylor <cgf@cygnus.com>
1434
1435         * ppc/Makefile.in: Add EXEEXT to installed powerpc-eabi-run program
1436         to allow successful operation on Windows.
1437
1438 Thu May 28 14:59:46 1998 Jillian Ye <jillian@cygnus.com>
1439
1440         * Makefile.in: Take RUNTEST out of FLAGS_TO_PASS so that make
1441         check can be invoked recursively.
1442
1443 Wed Apr 29 12:38:53 1998  Mark Alexander  <marka@cygnus.com>
1444
1445         * configure.in: Build simulator on sparclite and sparc86x targets.
1446         * configure: Regenerate.
1447
1448 Sun Apr 26 15:21:01 1998  Tom Tromey  <tromey@cygnus.com>
1449
1450         * Makefile.in (autoconf-common autoheader-common): Don't pass -l
1451         to autoconf and autoheader.
1452
1453 Fri Apr 24 11:14:13 1998  Tom Tromey  <tromey@cygnus.com>
1454
1455         * Makefile.in (autoconf-common autoheader-common): Pass `-l
1456         ../common' to autoconf and autoheader.  Unconditionally run
1457         autoconf in every subdir.
1458         (autoconf-changelog autoheader-changelog): Unconditionally run
1459         commands in every subdir.
1460         (autoconf-install autoheader-install): Likewise.
1461
1462 Tue Mar 24 17:12:43 1998  Stu Grossman  <grossman@bhuna.cygnus.co.uk>
1463
1464         * Makefile.in:  Get SHELL from configure.
1465         * (FLAGS_TO_PASS):  Pass down SHELL.
1466         * configure:  Regenerate with autoconf 2.12.1 to fix shell issues for
1467         NT native builds.
1468
1469 Tue Mar 24 11::18:00 1998  Joyce Janczyn  <janczyn@cygnus.com>
1470
1471         * configure.in (extra_subdirs): Enable igen for mn10300.
1472         * configure: Re-generate.
1473
1474 Tue Dec  2 10:10:42 1997  Nick Clifton  <nickc@cygnus.com>
1475
1476         * configure.in (extra_subdirs): Add support for thumb target.
1477
1478         * configure (extra_subdirs): Add support for thumb target.
1479
1480 Wed Oct  8 12:38:48 1997  Andrew Cagney  <cagney@b1.cygnus.com>
1481
1482         * configure.in (extra_subdirs): Add IGEN directory when MIPS
1483         target.
1484         * configure: Regenerate.
1485
1486 Fri Sep 12 13:10:31 1997  Andrew Cagney  <cagney@b1.cygnus.com>
1487
1488         * configure.in (extra_subdirs): v850ea needs igen.
1489         * configure: Re-generate.
1490
1491 Mon Sep  1 16:48:23 1997  Andrew Cagney  <cagney@b1.cygnus.com>
1492
1493         * configure.in (testdir): When a testsuite directory, add that to
1494         the list of confdirs.
1495
1496 Tue Aug 19 11:17:46 1997  Andrew Cagney  <cagney@b1.cygnus.com>
1497
1498         * configure.in (extra_subdirs): Enable igen ready for V850.
1499
1500 Tue Aug 26 15:14:48 1997  Andrew Cagney  <cagney@b1.cygnus.com>
1501
1502         * configure.in (w65-*-*, only_if_enabled): Set.
1503         * configure: Re-generate.
1504
1505 Mon Aug 25 16:26:53 1997  Andrew Cagney  <cagney@b1.cygnus.com>
1506
1507         * configure.in (sparc*-*-*, only_if_enabled): Set
1508         only_if_enabled=yes.  Check only_if_enabled before enabling a
1509         simulator.
1510         * configure: Regenerate.
1511
1512 Mon Aug 18 10:56:59 1997  Nick Clifton  <nickc@cygnus.com>
1513
1514         * configure.in (extra_subdirs): Add v850e target.
1515
1516 Mon Aug 18 10:56:59 1997  Nick Clifton  <nickc@cygnus.com>
1517
1518         * configure.in (extra_subdirs): Add v850ea target.
1519
1520 Fri Jul 25 11:40:47 1997  Doug Evans  <dje@canuck.cygnus.com>
1521
1522         * configure.in (sparc*-*-*): Don't build erc32.
1523         * configure: Regenerate.
1524
1525 Thu Apr 24 00:47:20 1997  Doug Evans  <dje@canuck.cygnus.com>
1526
1527         * configure.in (m32r-*-*): New target.
1528         * configure: Regenerate.
1529
1530         * Makefile.in (autoconf-common, autoconf-changelog): Change $* to $@.
1531
1532 Mon Apr 21 22:57:55 1997  Andrew Cagney  <cagney@b1.cygnus.com>
1533
1534         * Makefile.in (.NOEXPORT, MAKEOVERRIDES): Moved to end, BSD make
1535         thought that .NOEXPORT was the default target.
1536
1537 Fri Apr 11 17:18:07 1997  Ian Lance Taylor  <ian@cygnus.com>
1538
1539         * Makefile.in (clean mostlyclean): Restore targets accidentally
1540         deleted in earlier change.
1541
1542 Thu Apr  3 12:20:32 1997  Andrew Cagney  <cagney@kremvax.cygnus.com>
1543
1544         * Makefile.in (autoheader-common, autoheader-changelog,
1545         autoheader-install): Perform autoheader in addition to autoconf.
1546
1547 Wed Apr  2 15:09:05 1997  Doug Evans  <dje@canuck.cygnus.com>
1548
1549         * Makefile.in (autoconf-install): New target.
1550         (autoconf-changelog): Try different way to obtain user name.
1551
1552 Wed Apr  2 14:25:52 1997  Andrew Cagney  <cagney@kremvax.cygnus.com>
1553
1554         * Makefile.in (autoconf-changelog): New target, update
1555         ChangeLog for all subdirectories - normally used after
1556         autoconf-common target.
1557
1558 Wed Mar 19 14:26:21 1997  Andrew Cagney  <cagney@kremvax.cygnus.com>
1559
1560         * configure.in (extra_subdirs): Include testsuite for d30v.
1561         * configure: Regenerate.
1562
1563         * Makefile.in (RUNTEST, RUNTESTFLAGS): Borrow test rules from
1564         ../gdb/Makefile.in
1565         (check): New rules - drive the testsuite.
1566
1567 Mon Mar  3 13:01:00 1997  Jeffrey A Law  (law@cygnus.com)
1568
1569         * configure.in: Add mn10200 configure lines accidentally
1570         removed.
1571         * configure: Regenerated.
1572
1573 Wed Feb 19 10:34:20 1997  Andrew Cagney  <cagney@critters.cygnus.com>
1574
1575         * configure.in (extra_subdirs): Generalize common sub directory
1576         into a list.
1577         (extra_subdirs): For d30v add igen to the list to be built.
1578
1579 Sun Feb 16 16:37:47 1997  Andrew Cagney  <cagney@critters.cygnus.com>
1580
1581         * configure.in (d30v): New target.
1582         * configure: Regenerated.
1583
1584 Wed Feb 19 23:17:13 1997  Jeffrey A Law  (law@cygnus.com)
1585
1586         * configure.in: Don't require GCC to build the mn10200
1587         simulator anymore.
1588         * configure: Rebuilt.
1589
1590 Wed Feb  5 13:28:13 1997  Doug Evans  <dje@canuck.cygnus.com>
1591
1592         * configure.in: Don't configure any subdirs if no simulator
1593         is being built.  Don't use erc32 for sparc64.
1594         * configure: Regenerated.
1595
1596 Tue Feb  4 13:19:39 1997  Doug Evans  <dje@canuck.cygnus.com>
1597
1598         * Makefile.in (autoconf-common): New target.
1599         * configure.in: Do configure common.
1600         * configure: Regenerated.
1601
1602 Thu Jan 23 13:59:52 1997  Stu Grossman  (grossman@critters.cygnus.com)
1603
1604         * configure configure.in:  Don't configure common anymore.  Files
1605         from common are now built in the individual simualtor directories.
1606         This fixes problems with the WinGDB build procedure.
1607
1608 Mon Jan 13 13:16:42 1997  Jeffrey A Law  (law@cygnus.com)
1609
1610         * configure: Enable the mn10200 simulator.
1611
1612 Wed Nov 20 01:00:36 1996  Doug Evans  <dje@canuck.cygnus.com>
1613
1614         * configure.in (configdirs): Add common.
1615         * configure: Regenerated.
1616
1617 Fri Nov  1 08:03:30 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
1618
1619         * configure.in (powerpc*-*-linux*): Treat like the other powerpc
1620         system V based targets.
1621         * configure: Regenerate.
1622
1623 Thu Oct 17 12:50:08 1996  Doug Evans  <dje@canuck.cygnus.com>
1624
1625         * configure.in (--enable-sim-powerpc): Delete.
1626         (--enable-sim): Add.
1627         * configure: Regenerated.
1628
1629 Fri Oct 11 21:13:43 1996  Jeffrey A Law  (law@cygnus.com)
1630
1631         * configure.in: Only build the V850 simulator if
1632         we are using gcc.
1633         * configure: Rebuild.
1634
1635 Sun Sep  8 17:22:50 1996  Ian Lance Taylor  <ian@cygnus.com>
1636
1637         * configure.in: Do build erc32 for DOS and Windows hosts.
1638         * configure: Rebuild.
1639
1640 Wed Sep  4 18:11:27 1996  Stu Grossman  (grossman@critters.cygnus.com)
1641
1642         * Makefile.in erc32/Makefile.in:  Don't set srcroot.  This should
1643         be inherited from the parent.  Remove INSTALL_XFORM and
1644         INSTALL_XFORM1.  Make INSTALL be set from configure.
1645
1646 Wed Sep  4 15:49:16 1996  Ian Lance Taylor  <ian@cygnus.com>
1647
1648         * configure.in: Only build the MIPS simulator if we are using
1649         gcc.
1650         * configure: Rebuild.
1651
1652 Wed Aug 28 19:05:23 1996  Jeffrey A Law  (law@cygnus.com)
1653
1654         * configure.in (v850-*-*): Added V850 simulator.
1655
1656 Thu Aug  1 17:08:41 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
1657
1658         * configure.in (d10v-*-*): Added D10V simulator.
1659
1660 Wed Jun 26 12:33:57 1996  Jason Molenda  (crash@godzilla.cygnus.co.jp)
1661
1662         * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir,
1663         INSTALL_PROGRAM, INSTALL_DATA): Use autoconf-set values.
1664         (docdir): Removed.
1665         * configure.in (AC_PREREQ): autoconf 2.5 or higher.
1666         (AC_PROG_INSTALL): Added.
1667         * configure: Rebuilt.
1668
1669 Mon Jun 24 14:18:26 1996  Ian Lance Taylor  <ian@cygnus.com>
1670
1671         * configure.in: Only configure erc32 if using gcc.
1672         * configure: Rebuild.
1673
1674 Tue Jun  4 09:24:21 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
1675
1676         * configure.in (sim_target): Build PowerPC simulator for powerpc
1677         System V.4, Solaris, and Elf targets.
1678         * configure: Regenerate with autoconf 2.10.
1679
1680 Wed May 22 12:10:49 1996  Rob Savoye  <rob@chinadoll>
1681
1682         * configure.in: Only built erc32 simulator on Unix hosts as it
1683         uses pseudo ttys.
1684         * configure: Regenerated with autoconf 2.8.
1685
1686 Sun May 19 20:20:40 1996  Rob Savoye  <rob@chinadoll.cygnus.com>
1687
1688         * erc32: Sparc simulator from the ESA.
1689
1690 Sun Apr  7 21:00:09 1996  Fred Fish  <fnf@cygnus.com>
1691
1692         From: Miles Bader  <miles@gnu.ai.mit.edu>
1693         * configure.in: Use AC_CHECK_TOOL to find AR & RANLIB.
1694         * configure: Regenerate using autoconf.
1695
1696 Thu Feb 22 11:31:50 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
1697
1698         * Makefile.in (install): Fix typo.
1699
1700 Wed Feb 21 11:59:57 1996  Ian Lance Taylor  <ian@cygnus.com>
1701
1702         * configure: Regenerate with autoconf 2.7.
1703
1704         * Makefile.in (all): Simplify.
1705         (clean, mostlyclean): SUBDIRS may contain whitespace; fix the loop
1706         as in the all target.
1707         (distclean, maintainer-clean, realclean): Likewise.
1708         (install): Likewise.
1709
1710 Thu Feb 15 18:37:00 1996  Fred Fish  <fnf@cygnus.com>
1711
1712         * Makefile.in (all): Remove extra '\' char from shell script.
1713
1714 Wed Feb 14 16:43:59 1996  Mike Meissner  <meissner@tiktok.cygnus.com>
1715
1716         * Makefile.in (all): Avoid a for loop with zero elements, even if
1717         the loop will not be executed because of an if statement.
1718
1719 Wed Jan 31 21:48:34 1996  Fred Fish  <fnf@cygnus.com>
1720
1721         * Makefile.in (install): Add missing semicolon in "fi \".
1722
1723 Thu Nov  9 16:10:56 1995  Michael Meissner  <meissner@tiktok.cygnus.com>
1724
1725         * Makefile.in (AR, CC, CFLAGS, CC_FOR_BUILD, RANLIB): Pick up
1726         defaults from configure.
1727
1728         * configure.in: Pick up AR, CC, CFLAGS, CC_FOR_BUILD, RANLIB using
1729         configure defaults.
1730         (powerpc*-*-eabi*): Build simulator for all powerpc eabi targets
1731         if either --enable-sim-powerpc is used, or the host compiler is
1732         GCC.
1733
1734 Wed Nov  8 15:46:49 1995  James G. Smith  <jsmith@pasanda.cygnus.co.uk>
1735
1736         * configure.in (mips*-*-*): Added "mips" simulator target.
1737         * configure: Re-generated.
1738
1739 Tue Oct 10 11:08:20 1995  Fred Fish  <fnf@cygnus.com>
1740
1741         * Makefile.in (BISON): Remove macro.
1742         (FLAGS_TO_PASS): Remove BISON.
1743
1744 Sun Oct  8 04:26:27 1995  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
1745
1746         * configure.in:  Explicitly `exit 0' for broken shells.
1747         * configure:  Rebuilt.
1748
1749 Fri Oct  6 12:03:27 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
1750
1751         * common/run.c (main): Initialize the callbacks.
1752
1753 Wed Sep 20 13:34:50 1995  Ian Lance Taylor  <ian@cygnus.com>
1754
1755         * Makefile.in (maintainer-clean): New synonym for realclean.
1756
1757 Fri Aug 25 11:53:43 1995  Michael Meissner  <meissner@tiktok.cygnus.com>
1758
1759         * configure.in (powerpc*-*-eabisim*): Only build the simulator if
1760         the target is powerpc*-*-eabisim*, since it requires GCC to build.
1761
1762 Mon Aug 21 17:53:48 1995  Michael Meissner  <meissner@tiktok.cygnus.com>
1763
1764         * configure.in (powerpc{,le}-*-*): Add psim from Andrew Cagney
1765         <cagney@highland.com.au>.
1766         * configure: Regnerate from configure.in.
1767
1768 Thu Aug  3 10:45:37 1995  Fred Fish  <fnf@cygnus.com>
1769
1770         * Update all FSF addresses except those in COPYING* files.
1771
1772 Thu Jul 20 15:17:29 1995  Fred Fish  <fnf@cygnus.com>
1773
1774         * Makefile.in (CC_FOR_BUILD):  Define default and arrange to pass
1775         submakes either default or passed in value.
1776
1777 Wed Jul  5 14:32:54 1995  J.T. Conklin  <jtc@rtl.cygnus.com>
1778
1779         * Makefile.in (all, clean, distclean, mostlyclean, realclean,
1780           install): Changed targets so that they descend all
1781           subdirectories in $(SUBDIRS).
1782           (*-all, *-clean, *-install): Removed targets.
1783
1784         * configure.in: Don't bother with target makefile fragments, they
1785           are no longer needed.
1786         * configure: regenerated.
1787
1788         * Makefile.in, configure.in: converted to autoconf.
1789         * configure: New file, generated with autconf 2.4.
1790
1791 Wed May 24 14:48:46 1995  Steve Chamberlain  <sac@slash.cygnus.com>
1792
1793         * Makefile.in: Support ARM.
1794         * configure.in: Ditto.
1795
1796 Sun Jan 15 16:53:47 1995  Steve Chamberlain  <sac@splat>
1797
1798         * Makefile.in: Support W65.
1799         * configure.in: Ditto.
1800
1801 Sun Mar 13 09:27:50 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
1802
1803         * Makefile.in: Add TAGS target.
1804
1805 Mon Sep 13 12:47:15 1993  K. Richard Pixley  (rich@sendai.cygnus.com)
1806
1807         * Makefile.in (all-z8k, install-z8k, clean-z8k, all-h8300,
1808           install-h8300, clean-h8300, all-h8500, install-h8500,
1809           clean-h8500, all-sh, install-sh, clean-sh): do not echo
1810           recursion lines.
1811
1812 Wed Jun 30 14:12:05 1993  david d `zoo' zuhn  (zoo at poseidon.cygnus.com)
1813
1814         * Makefile.in: remove endian.h trace from h8500
1815
1816 Sun Jun 13 13:08:58 1993  Jim Kingdon  (kingdon@cygnus.com)
1817
1818         * Makefile.in: Add distclean, realclean, and mostlyclean targets.
1819
1820 Fri May 21 11:21:16 1993  david d `zoo' zuhn  (zoo at cirdan.cygnus.com)
1821
1822         * Makefile.in: make all of the all-* target (except all-nothing)
1823         depend on endian.h, so that if we're not building a simulator, we
1824         don't built endian
1825
1826 Fri May 21 10:55:06 1993  Ian Lance Taylor  (ian@cygnus.com)
1827
1828         * Makefile.in (check, installcheck): Added dummy targets.
1829
1830 Mon May  3 21:39:43 1993  Fred Fish  (fnf@cygnus.com)
1831
1832         * Makefile.in (endian): Find endian.c in $(srcdir), and also
1833         explicitly make it, since some makes apparently don't work with
1834         VPATH and .c to executable rules (SunOS make for example).
1835
1836 Mon May  3 08:29:01 1993  Steve Chamberlain  (sac@thepub.cygnus.com)
1837
1838         * Makefile.in (endian): Add explicit rule for broken makes.
1839
1840 Mon Mar 15 15:47:53 1993  Ian Lance Taylor  (ian@cygnus.com)
1841
1842         * Makefile.in (info, install-info): New targets.
1843         (DO_INSTALL): Renamed from INSTALL, which is overridden by the top
1844         level Makefile.
1845
1846 Wed Feb 10 20:12:27 1993  K. Richard Pixley  (rich@ok.cygnus.com)
1847
1848         * Makefile.in (endian.h): build endian.h via a temporary file so
1849           that we don't leave an incomplete file lying around on
1850           interrupted builds.
1851           (clean): remove endian, e.h, and endian.h.
1852
1853 Mon Feb  8 11:46:06 1993  Steve Chamberlain  (sac@thepub.cygnus.com)
1854
1855         * Makefile.in, configure.in: if target isn't supported, build a
1856         harmless makefile.
1857
1858