sim/ChangeLog

   1 2011-07-08  Hans-Peter Nilsson  <hp@axis.com>
   2
   3         * MAINTAINERS: Remove Thiemo Seufer.
   4
   5 2011-06-04  Mike Frysinger  <vapier@gentoo.org>
   6
   7         * configure.tgt (bfin-*-*): Add sim_testsuite=yes.
   8         * configure: Regenerate.
   9
  10 2011-05-04  Joseph Myers  <joseph@codesourcery.com>
  11
  12         * configure.tgt (thumb*-*-* | strongarm*-*-* | xscale-*-*): Don't
  13         handle targets.
  14         * configure: Regenerate.
  15
  16 2011-03-05  Mike Frysinger  <vapier@gentoo.org>
  17
  18         * MAINTAINERS: Add bfin entry.
  19         * configure.tgt (bfin-*-*): Handle bfin targets.
  20         * configure: Regenerate.
  21
  22 2011-01-05  Mike Frysinger  <vapier@gentoo.org>
  23
  24         * .gitignore: Add /*/hw-config.h.
  25
  26 2010-12-23  Mike Frysinger  <vapier@gentoo.org>
  27
  28         * .gitignore: New file.
  29
  30 2010-07-28  DJ Delorie  <dj@redhat.com>
  31
  32         * MAINTAINERS: Add self as RX maintainer.  Sort list.
  33
  34 2010-06-08  Nick Clifton  <nickc@redhat.com>
  35
  36         * reg.c (set_oszc): Use unsigned int for the mask.
  37         (set_szc, set_osz, set_sz): Likewise.
  38
  39 2010-04-26  Mike Frysinger  <vapier@gentoo.org>
  40
  41         * configure.ac: Target logic moved out to and included from ...
  42         * configure.tgt: ... this new file.
  43         * configure: Regenerated.
  44
  45 2010-04-12  Mike Frysinger  <vapier@gentoo.org>
  46
  47         * README-HACKING: Add more sections.
  48
  49 2010-02-11  Doug Evans  <dje@sebabeach.org>
  50
  51         * cris/cpuv10.h, * cris/cpuv32.h, * cris/cris-desc.c,
  52         * cris/cris-desc.h, * cris/decodev10.c, * cris/decodev32.c,
  53         * cris/modelv10.c, * cris/modelv32.c, * cris/semcrisv10f-switch.c,
  54         * cris/semcrisv32f-switch.c: Regenerate.
  55
  56 2010-01-09  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
  57
  58         * avr/configure: Regenerate.
  59         * cris/configure: Regenerate.
  60         * microblaze/configure: Regenerate.
  61
  62 2010-01-02  Doug Evans  <dje@sebabeach.org>
  63
  64         * cris/arch.c, * cris/arch.h, * cris/cpuall.h, * cris/cpuv10.c,
  65         * cris/cpuv10.h, * cris/cpuv32.c, * cris/cpuv32.h, * cris/cris-desc.c,
  66         * cris/cris-desc.h, * cris/cris-opc.h, * cris/decodev10.c,
  67         * cris/decodev10.h, * cris/decodev32.c, * cris/decodev32.h,
  68         * cris/modelv10.c, * cris/modelv32.c, * cris/semcrisv10f-switch.c,
  69         * cris/semcrisv32f-switch.c: Regenerate, update copyright year.
  70
  71 2010-01-01  Doug Evans  <dje@sebabeach.org>
  72
  73         * cris/mloop.in: Fix copyright year update snafu.
  74
  75 2009-11-24  Joel Brobecker  <brobecker@adacore.com>
  76
  77         * common/aclocal.m4: Add include of ../../config/zlib.m4.
  78         * common/common.m4: Use AM_ZLIB to check for zlib support.
  79         * ppc/configure.ac: Likewise.
  80         * arm/configure, avr/configure, common/configure, cr16/configure,
  81         cris/configure, d10v/configure, erc32/configure, frv/configure,
  82         h8300/configure, iq2000/configure, lm32/configure, m32c/configure,
  83         m32r/configure, m68hc11/configure, mcore/configure,
  84         microblaze/configure, mips/configure, mn10300/configure,
  85         moxie/configure, ppc/configure, sh/configure, sh64/configure,
  86         v850/configure: Regenerate.
  87
  88 2009-11-24  DJ Delorie  <dj@redhat.com>
  89
  90         * rx: New directory.
  91         * configure.ac: Add entry for Renesas RX.
  92         * configure: Regenerate.
  93
  94 2009-11-22  Doug Evans  <dje@sebabeach.org>
  95
  96         * cris/cpuall.h: Regenerate.
  97         * cris/cpuv10.h: Regenerate.
  98         * cris/cpuv32.h: Regenerate.
  99         * cris/decodev10.c: Regenerate.
 100         * cris/decodev10.h: Regenerate.
 101         * cris/decodev32.c: Regenerate.
 102         * cris/decodev32.h: Regenerate.
 103
 104 2009-11-12  Tristan Gingold  <gingold@adacore.com>
 105
 106         * avr/interp.c (sim_write): Allow byte access.
 107         (sim_read): Ditto.
 108
 109 2009-11-12  Tristan Gingold  <gingold@adacore.com>
 110
 111         * avr/interp.c (sim_load): Clear memory before loading.
 112
 113 2009-11-09  Tristan Gingold  <gingold@adacore.com>
 114
 115         * avr/interp.c (sim_resume): Fix typo for OP_ret.
 116
 117 2009-10-23  Doug Evans  <dje@sebabeach.org>
 118
 119         * cris/arch.c: Regenerate.
 120         * cris/arch.h: Regenerate.
 121         * cris/cpuall.h: Regenerate.
 122         * cris/cpuv10.c: Regenerate.
 123         * cris/cpuv10.h: Regenerate.
 124         * cris/cpuv32.c: Regenerate.
 125         * cris/cpuv32.h: Regenerate.
 126         * cris/cris-desc.c: Regenerate.
 127         * cris/cris-desc.h: Regenerate.
 128         * cris/cris-opc.h: Regenerate.
 129         * cris/decodev10.c: Regenerate.
 130         * cris/decodev10.h: Regenerate.
 131         * cris/decodev32.c: Regenerate.
 132         * cris/decodev32.h: Regenerate.
 133         * cris/modelv10.c: Regenerate.
 134         * cris/modelv32.c: Regenerate.
 135         * cris/semcrisv10f-switch.c: Regenerate.
 136         * cris/semcrisv32f-switch.c: Regenerate.
 137
 138 2009-10-22  Tristan Gingold  <gingold@adacore.com>
 139
 140         * avr/interp.c (sim_stop): Return 1.
 141
 142 2009-10-16  Doug Evans  <dje@sebabeach.org>
 143
 144         * MAINTAINERS: Add myself as m32r maintainer.
 145
 146 2009-10-15  Michael Egaer  <eager@eagercon.com>
 147
 148         * MAINTAINERS: Add self as MicroBlaze maintainer.
 149
 150 2009-10-14  Ben Elliston  <bje@gnu.org>
 151
 152         * MAINTAINERS (common): Move myself to "past maintainers" section.
 153
 154 2009-10-06  Michael Eager  <eager@eagercon.com>
 155
 156         * microblaze/interp.c: Add include microblaze-dis.h.
 157
 158 2009-09-23  Michael Eager  <eager@eagercon.com>
 159
 160         * configure: Add microblaze-*.* (not regenerated).
 161         * configure.ac: Likewise.
 162         * microblaze/config.in: New.
 163         * microblaze/configure: Generate.
 164         * microblaze/configure.ac: New.
 165         * microblaze/interp.c: New.
 166         * microblaze/Makefile.in: New.
 167         * microblaze/microblaze.h: New.
 168         * microblaze/microblaze.isa: New.
 169         * microblaze/sim-main.h: New.
 170         * microblaze/sysdep.h: New.
 171
 172 2009-08-22  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
 173
 174         * avr/config.in: Regenerate.
 175         * avr/configure: Likewise.
 176         * configure: Likewise.
 177         * cris/config.in: Likewise.
 178         * cris/configure: Likewise.
 179
 180         * configure.ac: m4_include toplevel config/override.m4.
 181         * configure: Regenerate.
 182         * avr/configure: Regenerate.
 183         * cris/configure: Regenerate.
 184
 185 2009-07-30  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
 186
 187         * Makefile.in (datarootdir): New variable.
 188
 189 2009-05-18  Jon Beniston <jon@beniston.com>
 190
 191         * MAINTAINERS: Add Jon Beniston as maintainer of lm32 sim.
 192         * configure.ac: Add lm32 target.
 193         * lm32: New directory.
 194
 195 2009-05-11  Andrew Cagney  <cagney@gnu.org>
 196
 197         * MAINTAINERS: Orphan ppc.
 198
 199 2009-05-08  Kevin Buettner  <kevinb@redhat.com>
 200
 201         * m32c/gdb-if.c (m32c_signal_to_host): Rename to
 202         m32c_signal_to_target.  Change signal return values from SIGILL,
 203         SIGTRAP, SIGSEGV, etc. to TARGET_SIGNAL_ILL, TARGET_SIGNAL_TRAP,
 204         TARGET_SIGNAL_SEGV, etc.  Fix all callers.
 205
 206 2009-04-30  Anthony Green  <green@moxielogic.com>
 207
 208         * MAINTAINERS: Add myself for the moxie port.
 209         * moxie: New directory.
 210         * configure.ac: Add entry for moxie.
 211         * configure: Regenerate.
 212
 213 2009-04-27  Tristan Gingold  <gingold@adacore.com>
 214
 215         * avr: New directory.
 216         * avr/interp.c, avr/Makefile.in, avr/configure.ac: New files.
 217         * avr/config.in: New file, generated by autoheader.
 218         * avr/configure: New file generated by autoconf.
 219         * configure.ac: Add avr.
 220         * configure: Regenerated.
 221
 222 2009-04-17  Carlos O'Donell  <carlos@codesourcery.com>
 223
 224         * Makefile.in: Add dummy install-pdf, html, and
 225         install-html targets.
 226
 227 2009-01-18  Hans-Peter Nilsson  <hp@axis.com>
 228
 229         * cris/sim-if.c: Include errno.h.
 230         (cris_start_address, cris_program_offset): New variables.
 231         (OPTION_CRIS_PROGRAM_OFFSET, OPTION_CRIS_STARTADDR): New option
 232         enums.
 233         (cris_options): New options --cris-program-offset and
 234         --cris-start-address.
 235         (cris_option_handler): Handle new options.
 236         (cris_program_offset_write, cris_set_section_offset_iterator)
 237         (cris_offset_sections, cris_offset_sections): New functions.
 238         (sim_load): Use cris_program_offset_write as function argument to
 239         cris_load_elf_file, not sim_write.
 240         (struct offsetinfo): New struct.
 241         (cris_handle_interpreter): Fix typo in comment.
 242         (sim_open): Call cris_offset_sections as soon as the bfd of the
 243         infile is available.  Gate bfd validity checks on abfd non-NULL.
 244         (sim_create_inferior): Let cris_start_address when != -1 override
 245         other start-address choices.
 246
 247 2009-01-06  Hans-Peter Nilsson  <hp@axis.com>
 248
 249         * cris/traps.c (abort): Define to call sim_io_error.
 250         (create_map): Make -1 imply a non-fixed address, not 0.  All
 251         callers changed.  Only prefer the next higher unmapped address if
 252         the last mapped address is no less than 0x40000000.  Check that
 253         the address to be mapped is not already mapped.  Update head
 254         comment.
 255         (unmap_pages): Don't call abort when recursive call fails, just
 256         note and return an error if a page in the range couldn't be unmapped.
 257         (cris_bmod_handler, h_supr_set_handler, h_supr_get_handler)
 258         (schedule, make_first_thread, cris_pipe_empty): New local variable sd.
 259         (cris_break_13_handler) <case TARGET_SYS_mmap2>: Handle
 260         non-MAP_FIXED argument overlapping existing map.  For MAP_FIXED,
 261         don't abort on page not being mapped.  Handle non-anon filemap
 262         with length padded to pagesize.
 263
 264 2009-01-03  Hans-Peter Nilsson  <hp@axis.com>
 265
 266         * cris/sim-if.c (TARGET_AT_NULL, TARGET_AT_PHDR, TARGET_AT_PHENT)
 267         (TARGET_AT_PHNUM, TARGET_AT_PAGESZ, TARGET_AT_BASE)
 268         (TARGET_AT_FLAGS, TARGET_AT_ENTRY, TARGET_AT_UID, TARGET_AT_EUID)
 269         (TARGET_AT_GID, TARGET_AT_EGID, TARGET_AT_HWCAP)
 270         (TARGET_AT_CLKTCK): Remove redundant macros.
 271         (AUX_ENT): Adjust to use standard ELF AT_* macros.
 272         (AUX_ENTF): Ditto.  Remove always-0 middle argument.  Update all
 273         callers.
 274         (sim_open): Also pass AT_SECURE.
 275
 276         * cris/sim-main.h (struct _sim_cpu): New member
 277         set_target_thread_data.
 278         * cris/crisv32f.c (CRIS_TLS_REGISTER): Define.
 279         * cris/crisv10f.c: Ditto.
 280         * cris/cris-tmpl.c (MY (set_target_thread_data)): New function.
 281         (MY (f_specific_init)): Set new _sim_cpu member to new function.
 282         * cris/traps.c (TARGET_SYS_set_thread_area): Define.
 283         (cris_break_13_handler) <case TARGET_SYS_set_thread_area>: New
 284         case.
 285
 286         * cris/traps.c (TARGET_SYS_exit_group): Define.
 287         (cris_break_13_handler): Handle it like the exit for the last
 288         thread.
 289
 290         * cris/traps.c (TARGET_UTSNAME): Update to 2009-01-01.
 291         (TARGET_EPOCH): Update to match TARGET_UTSNAME.  Correct comment.
 292         (cris_break_13_handler) <case TARGET_SYS_uname>: Update to
 293         2.6.27.  Set machine field to the BFD printable name of the
 294         machine.
 295
 296         * cris/traps.c (TARGET_MAP_DENYWRITE): Define.
 297         (cris_break_13_handler) <case TARGET_SYS_mmap2>: Handle
 298         TARGET_MAP_DENYWRITE.
 299
 300         * cris/traps.c (TARGET_SYS_access, TARGET_R_OK, TARGET_W_OK)
 301         (TARGET_X_OK, TARGET_F_OK): Define.
 302         (cris_break_13_handler) <case TARGET_SYS_access>: New case.
 303
 304         * cris/semcrisv32f-switch.c: Regenerate.
 305
 306 2008-12-30  Hans-Peter Nilsson  <hp@axis.com>
 307
 308         * cris/sim-if.c (sim_open): If sim_analyze_program fails, emit
 309         just a short CRIS-specific notice.  Tweak the wording for a
 310         failing architecture test.
 311
 312         * cris/traps.c (TARGET_SYS_writev): New macro.
 313         (is_mapped_only, cris_dump_map): New functions.
 314         (cris_break_13_handler) <case TARGET_SYS_mmap2>: Handle more flags
 315         and prot combinations and a non-zero page-offset.  If
 316         TARGET_MAP_FIXED, unmap pages before mapping them.
 317         <case TARGET_SYS_mprotect>: When checking, allow any length
 318         argument.  Don't actually do anything.
 319         <case TARGET_SYS_writev>: New case.
 320
 321         * cris/Makefile.in (SIM_OBJS): Remove sim-hload.o.
 322         * cris/sim-if.c: Include elf-bfd.h.
 323         (struct progbounds): New members end_loadmem, start_nonloadmem.
 324         (xprintf, eprintf): New functions, copied from common/sim-load.c.
 325         (cris_load_elf_file, sim_load, cris_get_progbounds): New functions.
 326         (get_progbounds_iterator): Renamed from get_progbounds.  Make
 327         static.  Update head comment.  Set new struct progbounds members.
 328         (exec_load_addr, interp_load_addr, interp_start_addr): New static
 329         variables.
 330         (aux_ent_phdr, aux_ent_phent, aux_ent_phnum, aux_ent_base)
 331         (aux_ent_entry, cris_write_interp, cris_handle_interpreter): New
 332         functions.
 333         (sim_open): New constant array auxv_entries.  Rewrite AUX_ENT
 334         handling to use auxv_entries.  Improve error message and checking
 335         for invalid programs.  Use new variable abfd for the program
 336         instead of for each access reaching into sd to get it.
 337         (sim_create_inferior): If non-zero, use interp_start_addr instead
 338         of the program start address.
 339         (cris_disassemble_insn): Remove incorrect and unclear, supposedly
 340         stale comment.  Always specify little-endian.
 341
 342 2008-07-29  Nick Clifton  <nickc@redhat.com>
 343
 344         * common/genmloop.sh: Add new parameter: -shell to specify the
 345         command interpreter to use to run the input file.  This is
 346         necessary because otherwise SHELL is taken from the user's
 347         environment, and not from the makefile that invoked this script
 348         and the user might not be running an sh-like shell.
 349         * cris/Makefile.in: Pass -shell parameter to genmloop.sh.
 350         * fr30/Makefile.in: Likewise.
 351         * frv/Makefile.in: Likewise.
 352         * i960/Makefile.in: Likewise.
 353         * iq2000/Makefile.in: Likewise.
 354         * m32r/Makefile.in: Likewise.
 355
 356         * frv/mloop.in: Add missing start of line comment marker.
 357
 358 2008-07-11  Hans-Peter Nilsson  <hp@axis.com>
 359
 360         * cris/configure: Regenerate to track ../common/common.m4 changes.
 361         * cris/config.in: Ditto.
 362
 363 2008-06-06  Vladimir Prus  <vladimir@codesourcery.com>
 364             Daniel Jacobowitz  <dan@codesourcery.com>
 365             Joseph Myers  <joseph@codesourcery.com>
 366
 367         * cris/configure: Regenerate.
 368
 369 2008-05-09  Olivier Hainque  <hainque@adacore.com>
 370
 371         * ppc/altivec.igen (vperm): Latch inputs into temporaries.
 372
 373 2008-03-25  M R Swami Reddy <MR.Swami.Reddy@nsc.com>
 374
 375         * MAINTAINERS: Add myself as maintainer of cr16 port.
 376
 377 2008-02-12  M Ranga Swami Reddy <MR.Swami.Reddy@nsc.com>
 378
 379         Add simulator for National cr16 processor.
 380         * cr16: New directory.
 381         * configure.ac: Add entry for National cr16.
 382         * configure: Regenerate.
 383
 384 2008-02-05  DJ Delorie  <dj@redhat.com>
 385
 386         * configure.ac (v850): V850 now has a testsuite.
 387         * configure (v850): Likewise.
 388
 389 2008-01-01  Daniel Jacobowitz  <dan@codesourcery.com>
 390
 391         Updated copyright notices for most files.
 392
 393 2007-12-19  DJ Delorie  <dj@redhat.com>
 394
 395         * frv/frv.c (frvbf_cut): Only look at the six LSBs of
 396         cut_point.
 397
 398 2007-10-22  Hans-Peter Nilsson  <hp@axis.com>
 399
 400         * cris/arch.c, cris/arch.h, cris/cpuall.h, cris/cpuv10.c,
 401         cris/cpuv10.h, cris/cpuv32.c, cris/cpuv32.h, cris/cris-desc.c,
 402         cris/cris-desc.h, cris/cris-opc.h, cris/decodev10.c,
 403         cris/decodev10.h, cris/decodev32.c, cris/decodev32.h,
 404         cris/modelv10.c, cris/modelv32.c, cris/semcrisv10f-switch.c,
 405         cris/semcrisv32f-switch.c: Regenerate.
 406
 407 2007-08-24  Joel Brobecker  <brobecker@adacore.com>
 408
 409         Switch the license of all files explicitly copyright the FSF
 410         to GPLv3.
 411
 412 2007-03-27  Brooks Moses  <brooks.moses@codesourcery.com>
 413
 414         * Makefile.in: Add dummy "pdf" target.
 415
 416 2007-02-20  Hans-Peter Nilsson  <hp@axis.com>
 417
 418         * cris/traps.c (dump_statistics): Change format for cycle numbers
 419         to %llu and cast parameters to unsigned long long.
 420
 421 2007-02-16  Thiemo Seufer  <ths@mips.com>
 422
 423         * Makefile.in (FLAGS_TO_PASS, TARGET_FLAGS_TO_PASS): Add RUNTEST.
 424
 425 2007-01-28  Manuel Lauss  <slauss@resi.at>
 426
 427         * configure.ac (sh64-*-*): Change to sh64*-*-*.
 428         (sh-*-*): Change to sh*-*-*.
 429         * configure: Regenerated.
 430
 431 2007-01-09  Daniel Jacobowitz  <dan@codesourcery.com>
 432
 433         Updated copyright notices for most files.
 434
 435 2006-12-20  Hans-Peter Nilsson  <hp@axis.com>
 436
 437         * Makefile.in (autoconf-common autoheader-common): Only run
 438         autoheader on subdirs with a file config.in.
 439
 440         * configure.ac (common): Make the default "yes" for all targets
 441         with sim subdirs.
 442         * configure: Regenerate.
 443
 444         * Makefile.in (autoconf-common autoheader-common): In documented
 445         usage, say SHELL=/bin/sh.
 446         (.PHONY): Add autoheader-common.
 447
 448         * MAINTAINERS: Add self as authorized committer for *.
 449
 450 2006-10-02  Edgar E. Iglesias  <edgar@axis.com>
 451             Hans-Peter Nilsson  <hp@axis.com>
 452
 453         * cris/cris-sim.h (enum cris_unknown_syscall_action_type)
 454         (cris_unknown_syscall_action): Declare.
 455         * cris/sim-if.c (cris_unknown_syscall_action): Define.
 456         (cris_options): Add cris-unknown-syscall option.
 457         (cris_option_handler): Correct comment about and error message for
 458         invalid --cris-cycles argument.  Handle --cris-unknown-syscall.
 459         * cris/traps.c: Include stdarg.h
 460         (cris_unknown_syscall): New function.
 461         (cris_break_13_handler): Instead of sim_io_eprintf and
 462         sim_engine_halt, call cris_unknown_syscall to handle more or less
 463         unknown syscalls.  Adjust code as necessary to handle return
 464         value.
 465
 466 2006-09-30  Daniel Jacobowitz  <dan@codesourcery.com>
 467
 468         * MAINTAINERS: Add Dave Brolley for sh64.
 469
 470 2006-09-30  Hans-Peter Nilsson  <hp@axis.com>
 471
 472         * cris/traps.c (TARGET_PIPE_BUF): New macro.
 473         (cris_pipe_empty): Correct initialization of "remaining".  Only
 474         adjust the "write" return value if more than TARGET_PIPE_BUF bytes
 475         are written.
 476
 477 2006-09-29  Hans-Peter Nilsson  <hp@axis.com>
 478
 479         * cris/configure.ac: Check for limits.h and sys/param.h.
 480         * cris/configure, cris/config.in: Rebuild.
 481         * cris/traps.c (SIM_PATHMAX): New macro.
 482         (cris_break_13_handler): Use SIM_PATHMAX, not MAXPATHLEN.
 483
 484 2006-08-08  Joel Sherrill <joel.sherrill@oarcorp.com>
 485
 486         * configure.ac (sparc-*-rtems*|sparc-*-elf*): Enable erc32 simulator.
 487         * Makefile.in (FLAGS_TO_PASS): Include libdir.
 488         * configure: Regenerated.
 489
 490 2006-06-05  Daniel Jacobowitz  <dan@codesourcery.com>
 491
 492         * cris/configure: Regenerated.
 493
 494 2006-05-31  Daniel Jacobowitz  <dan@codesourcery.com>
 495
 496         * cris/configure: Regenerated.
 497
 498 2006-05-05  Andreas Schwab  <schwab@suse.de>
 499
 500         * configure.ac (CFLAGS_FOR_BUILD): Set and substitute.
 501         * configure: Regenerate.
 502
 503         * Makefile.in (CFLAGS_FOR_BUILD): Define.
 504         (CC_FOR_BUILD): Don't override.
 505         (FLAGS_TO_PASS): Pass CFLAGS_FOR_BUILD.
 506
 507 2006-05-04  Daniel Jacobowitz  <dan@codesourcery.com>
 508
 509         * MAINTAINERS: Add an "Authorized committers" section, and list
 510         DJ Delorie for v850.
 511
 512 2006-04-08  Hans-Peter Nilsson  <hp@axis.com>
 513
 514         * cris/crisv32f.c (MY (deliver_interrupt)): Set CCS to new_ccs.
 515
 516 2006-04-03  Hans-Peter Nilsson  <hp@axis.com>
 517
 518         * cris/dv-cris.c, cris/dv-rv.c, cris/rvdummy.c: New files.
 519         * cris/Makefile.in (CONFIG_DEVICES): Remove redundant setting.
 520         (dv-cris.o, dv-rv.o rvdummy$(EXEEXT), rvdummy.o): New rules.
 521         (all): Depend on rvdummy$(EXEEXT).
 522         * cris/configure.ac: Call SIM_AC_OPTION_WARNINGS.  Check for
 523         sys/socket.h and sys/select.h.  Call SIM_AC_OPTION_HARDWARE,
 524         default off.
 525         * cris/configure: Regenerate.
 526         * cris/cris-sim.h (cris_have_900000xxif): Declare here.
 527         (enum cris_interrupt_type, crisv10deliver_interrupt)
 528         (crisv32deliver_interrupt: New declarations.
 529         * cris/cris-tmpl.c [WITH_HW] (MY (f_model_insn_after)): Call
 530         sim_events_tickn and set state-events member work_pending when it's
 531         time for the next event.
 532         [WITH_HW] (MY (f_specific_init)): Set CPU-model-specific
 533         interrupt-delivery function.
 534         * cris/crisv10f.c (MY (deliver_interrupt)): New function.
 535         * cris/crisv32f.c (MY (deliver_interrupt)): New function.
 536         * cris/devices.c: Include hw-device.h.
 537         (device_io_read_buffer) [WITH_HW]: Call hw_io_read_buffer.
 538         (device_io_write_buffer): Only perform 0x900000xx-functions if
 539         cris_have_900000xxif is nonzero.  Else if WITH_HW defined,
 540         call hw_io_write_buffer.  Add return 0 last in function.
 541         * cris/sim-if.c (cris_have_900000xxif): Now global.
 542         (sim_open) [WITH_HW]: Clear deliver_interrupt cpu member.
 543         Force "-model" option, effectively.
 544         * cris/sim-main.h (cris_interrupt_delivery_fn): New type.
 545         (struct _sim_cpu) [WITH_HW]: New member deliver_interrupt.
 546
 547 2006-04-02  Hans-Peter Nilsson  <hp@axis.com>
 548
 549         * cris/Makefile.in (CRISV10F_OBJS): Remove semcrisv10f-switch.o.
 550         (CRISV32F_OBJS): Remove semcrisv32f-switch.o.
 551         (semcrisv10f-switch.o, semcrisv32f-switch.o: Remove dependency rules.
 552
 553 2006-03-13  DJ Delorie  <dj@redhat.com>
 554
 555         * MAINTAINERS: Add self as m32c sim maintainer.
 556
 557 2006-02-23  Hans-Peter Nilsson  <hp@axis.com>
 558
 559         * cris/traps.c (syscall_map): Remove CB_SYS_time / TARGET_SYS_time
 560         mapping.
 561         (cris_break_13_handler) <case TARGET_SYS_time>: New case.
 562
 563 2006-01-23  Jim Blandy  <jimb@redhat.com>
 564
 565         Add simulator for Renesas M32C and M16C.
 566
 567         * m32c: New directory.
 568         * configure.ac: Add entry for Renesas M32C.
 569         * configure: Regenerate.
 570
 571 2006-01-10  Hans-Peter Nilsson  <hp@axis.com>
 572
 573         * cris/cris-tmpl.c (MY (f_model_insn_before)): Only display basic
 574         cycle count for the current insn.
 575
 576 2005-12-06  Hans-Peter Nilsson  <hp@axis.com>
 577
 578         * cris/cpuv10.h, cris/cpuv32.h, cris/cris-desc.c, cris/cris-opc.h,
 579         cris/decodev10.c, cris/decodev10.h, cris/decodev32.c,
 580         cris/decodev32.h, cris/modelv10.c, cris/modelv32.c,
 581         cris/semcrisv10f-switch.c, cris/semcrisv32f-switch.c: Regenerate.
 582
 583 2005-12-05  Hans-Peter Nilsson  <hp@axis.com>
 584
 585         * cris/arch.c, cris/arch.h, cris/cpuall.h, cris/cpuv10.c,
 586         cris/cpuv10.h, cris/cpuv32.c, cris/cpuv32.h, cris/cris-desc.c,
 587         cris/cris-desc.h, cris/cris-opc.h, cris/decodev10.c,
 588         cris/decodev10.h, cris/decodev32.c, cris/decodev32.h,
 589         cris/modelv10.c, cris/modelv32.c, cris/semcrisv10f-switch.c,
 590         cris/semcrisv32f-switch.c: Regenerate.
 591
 592 2005-11-20  Hans-Peter Nilsson  <hp@axis.com>
 593
 594         * cris/traps.c (TARGET_O_RDONLY, TARGET_O_WRONLY): Define.
 595         (open_map): Use TARGET_O_ACCMODE, TARGET_O_RDONLY and
 596         TARGET_O_WRONLY.
 597         (cris_break_13_handler) <case TARGET_SYS_fcntl>: Add support for
 598         F_GETFL on fd 0, 1 and 2.
 599
 600 2005-11-17  Hans-Peter Nilsson  <hp@axis.com>
 601
 602         * cris/sim-main.h (struct _sim_cpu): New members last_syscall,
 603         last_open_fd, last_open_flags.
 604         * cris/traps.c: Don't include targ-vals.h.
 605         (TARGET_O_ACCMODE): Define.
 606         (cris_break_13_handler): Set new _sim_cpu members.
 607         <case TARGET_SYS_fcntl>: Support special case of F_GETFL.
 608         Rearrange code as switch.  Emit "unimplemented" abort for
 609         unimplemented fcntl calls.
 610
 611         * cris/traps.c (TARGET_SYS_stat): Define.
 612         (syscall_stat32_map): Add entry for TARGET_SYS_stat.
 613         (cris_break_13_handler) <case TARGET_SYS_stat>: New case.
 614
 615 2005-11-16  Hans-Peter Nilsson  <hp@axis.com>
 616
 617         * cris/cris-tmpl.c (MY (f_model_insn_before)): Make sure only the
 618         low 32 bits are used after an unsigned long cast.
 619
 620 2005-05-28  Hans-Peter Nilsson  <hp@axis.com>
 621
 622         * cris/Makefile.in (stamp-v32fmloop): Depend on stamp-v10fmloop.
 623
 624 2005-05-26  Chris Demetriou  <cgd@netbsd.org>
 625
 626         * MAINTAINERS: Update my mail address, move myself to the
 627         "Past maintainers" section.
 628
 629 2005-05-17  Corinna Vinschen  <vinschen@redhat.com>
 630
 631         * configure.ac: Add igen to v850 build.
 632         * configure: Regenerate.
 633
 634 2005-04-29  Paul Brook  <paul@codesourcery.com>
 635
 636         * common/callback.c (PIPE_BUF): Provide default definition.
 637         (os_lstat): Use stat if lstat is not available on the host.
 638         (os_ftruncate): Return EINVAL if not available on the host.
 639         (os_truncate): Ditto.
 640         * common/configure.ac: Check for lstat, truncate and ftruncate.
 641         * common/configure: Regenerate.
 642         * common/config.in: Regenerate.
 643
 644 2005-04-27  Paul Brook  <paul@codesourcery.com>
 645
 646         * common/Make-common.in: Add $(EXEEXT) to "run".
 647
 648 2005-04-18  Hans-Peter Nilsson  <hp@axis.com>
 649
 650         * cris/traps.c (cris_break_13_handler) <case TARGET_SYS_mmap2>:
 651         For ((len & 8191) != 0 && fd == (USI) -1), don't say this isn't
 652         implemented.  In call to create_map, pad length argument to 8k.
 653
 654 2005-04-15  Corinna Vinschen  <vinschen@redhat.com>
 655
 656         * configure.ac: Add explicit sh64 case.
 657         * configure: Regenerate.
 658
 659 2005-03-30  Paul Brook  <paul@codesourcery.com>
 660
 661         * arm/wrapper.c: Provide SIGTRAP and SIGBUS.
 662
 663 2005-03-24  Hans-Peter Nilsson  <hp@axis.com>
 664
 665         * cris/Makefile.in (stamp-v10fcpu, stamp-v32fcpu): Add kludge to
 666         include cgen-ops.h in decodev10.c and decodev32.c.
 667         * cris/sim-main.h: Don't include cgen-ops.h here.
 668         * cris/arch.c, cris/arch.h, cris/cpuall.h, cris/cpuv10.c,
 669         cris/cpuv10.h, cris/cpuv32.c, cris/cpuv32.h, cris/cris-desc.c,
 670         cris/cris-desc.h, cris/cris-opc.h, cris/decodev10.c,
 671         cris/decodev10.h, cris/decodev32.c, cris/decodev32.h,
 672         cris/modelv10.c, cris/modelv32.c, cris/semcrisv10f-switch.c,
 673         cris/semcrisv32f-switch.c: Regenerate.
 674
 675         * cris/traps.c (cris_break_13_handler) <case
 676         TARGET_SYS_rt_sigaction>: Rename sa_handler, sa_flags,
 677         sa_restorer, sa_mask_low, sa_mask_high to target_sa_handler etc.
 678
 679 2005-03-23  Mark Kettenis  <kettenis@gnu.org>
 680
 681         * cris/configure: Regenerate.
 682
 683 2005-02-28  Jim Blandy  <jimb@redhat.com>
 684
 685         * d10v/configure.ac, igen/configure.ac, m68hc11/configure.ac,
 686         mips/configure.ac, mn10300/configure.ac, v850/configure.ac:
 687         Regenerated, after change to common/aclocal.m4.
 688
 689 2005-02-18  Corinna Vinschen  <vinschen@redhat.com>
 690
 691         * iq2000: New target subdirectory.
 692         * configure.ac: Add iq2000 target.
 693         * configure: Regenerate.
 694
 695 2005-01-29  Hans-Peter Nilsson  <hp@axis.com>
 696
 697         * Makefile.in (all, clean mostlyclean, distclean maintainer-clean)
 698         (realclean, install): Fail if subdir make failed.
 699
 700 2005-01-28  Hans-Peter Nilsson  <hp@axis.com>
 701
 702         * cris: New directory, simulator for Axis Communications CRIS
 703         including CRIS v32, CGEN-based.
 704         * configure.ac: Add corresponding configury.
 705         * configure: Regenerate.
 706
 707 2005-01-17  Andrew Cagney  <cagney@gnu.org>
 708
 709         * configure.ac: For mips*-*-* and mn10300*-*-* configure the
 710         common directory.  Remove sparc*-*-* from list.
 711
 712 2005-01-11  Andrew Cagney  <cagney@gnu.org>
 713
 714         * Makefile.in (autoconf-common autoheader-common): Add --force to
 715         autoconf and autoheader.
 716         (autoconf-common autoheader-common)
 717         (autoconf-install autoheader-install): Check for configure.ac, not
 718         configure.in.
 719         * configure.ac: Delete AC_CONFIG_AUX_DIR.
 720         * configure: Re-generate.
 721
 722 2005-01-07  Andrew Cagney  <cagney@gnu.org>
 723
 724         * configure.ac: Replace configure.in.  Requires autoconf 2.59 and
 725         correctly calls AC_CONFIG_SUBDIRS.
 726         * configure: Re-generate.
 727
 728 2004-12-01  Andrew Cagney  <cagney@gnu.org>
 729
 730         * i960, h8500: Delete directory.
 731
 732 2004-11-12  Andrew Cagney  <cagney@gnu.org>
 733
 734         * d30v, fr30, mn10200, z8k: Delete directory.
 735
 736 2004-03-10  Ben Elliston  <bje@gnu.org>
 737
 738         * MAINTAINERS: Update my mail address.
 739
 740 2004-01-26  Chris Demetriou  <cgd@broadcom.com>
 741
 742         * configure.in (mips*-*-*): Configure in testsuite.
 743         * configure: Regenerate.
 744
 745 2003-10-08  Dave Brolley  <brolley@redhat.com>
 746
 747         * configure.in: Move frv handling to alphabetically correct placement.
 748
 749 2003-09-03  Andreas Schwab  <schwab@suse.de>
 750
 751         * Makefile.in (FLAGS_TO_PASS): Pass down $(bindir) and $(mandir).
 752
 753 2003-08-29  Dave Brolley  <brolley@redhat.com>
 754
 755         * MAINTAINERS: Add myself as maintainer of the FRV port.
 756
 757 2003-08-20  Michael Snyder  <msnyder@redhat.com>
 758             Dave Brolley  <brolley@redhat.com>
 759
 760         * frv/: New directory, simulator for the Fujitsu FRV.
 761         * configure.in: Add frv configury.
 762         * configure: Regenerate.
 763
 764 2003-08-10  Ben Elliston  <bje@wasabisystems.com>
 765
 766         * MAINTAINERS: Update my mail address.
 767
 768 2003-08-09  Andrew Cagney  <cagney@redhat.com>
 769
 770         * MAINTAINERS: Andrew Cagney (mips) and Geoff Keating (ppc) drop
 771         maintenance.  List igen and sh maintainers.  Mention that target
 772         and global maintainers pick up the slack.
 773
 774 2003-07-09  Michael Snyder  <msnyder@redhat.com>
 775
 776         * configure.in: Add testsuite to extra_subdirs for sh.
 777         * configure: Regenerate.
 778
 779 2003-01-23  Nick Clifton  <nickc@redhat.com>
 780
 781         * Add sh2e support:
 782
 783 2002-04-02  Alexandre Oliva  <aoliva@redhat.com>
 784
 785         * sh/gencode.c: Replace sh3e with sh2e except in fsqrt.
 786
 787 2002-08-24  Geoffrey Keating  <geoffk@redhat.com>
 788
 789         * MAINTAINERS: Update my email address.
 790
 791 2002-07-17  Andrew Cagney  <ac131313@redhat.com>
 792
 793         * w65/: Delete directory.
 794
 795 2002-07-16  Andrew Cagney  <ac131313@redhat.com>
 796
 797         * configure.in (extra_subdirs): Mark fr30-*-* as obsolete.
 798         * configure: Re-generate.
 799
 800 2002-07-13  Andrew Cagney  <ac131313@redhat.com>
 801
 802         * configure.in (extra_subdirs): Mark d30v-*-* as obsolete.
 803         * configure: Re-generate.
 804
 805 2002-06-16  Andrew Cagney  <ac131313@redhat.com>
 806
 807         * Makefile.in (autoconf-changelog autoheader-changelog): Let name,
 808         id, date and host to be overriden by NAME, ID, DATE and HOST
 809         respectfully.  Use ISO dates.
 810
 811 Thu Jun  6 12:34:13 2002  Andrew Cagney  <cagney@redhat.com>
 812
 813         * Makefile.in (ChangeLog): New makefile variable.
 814         * README-HACKING: Mention the ChangeLog makefile variable.
 815
 816 2002-06-01  Andrew Cagney  <ac131313@redhat.com>
 817
 818         * tic80/: Delete directory.
 819
 820 2002-05-16  Stephane Carrez  <stcarrez@nerim.fr>
 821
 822         * MAINTAINERS: Update my email address.
 823
 824 2002-03-06  Stephane Carrez  <Stephane.Carrez@worldnet.fr>
 825
 826         * MAINTAINERS: Record self as maintainer of m68hc11 simulator.
 827
 828 2002-03-01  Frank Ch. Eigler  <fche@redhat.com>
 829
 830         * MAINTAINERS: Record self as a co-maintainer of just common/.
 831
 832 2002-02-07  Nick Clifton  <nickc@cambridge.redhat.com>
 833
 834         * MAINTAINERS: Point to GDB files describing overall maintaince
 835         and check-in procedures.
 836
 837 2002-01-10  Nick Clifton  <nickc@cambridge.redhat.com>
 838
 839         * MAINTAINERS: Add myself for ARM portions.
 840
 841 2001-10-19  Andrew Cagney  <ac131313@redhat.com>
 842
 843         * configure.in: When Linux or NetBSD, enable PowerPC simulator.
 844         * configure: Re-generate.
 845
 846 2001-02-16  Ben Elliston  <bje@redhat.com>
 847
 848         * MAINTAINERS: Add myself for common portions.
 849
 850 2001-01-15  Chris Demetriou  <cgd@broadcom.com>
 851
 852         * MAINTAINERS: Added self and Andrew for the mips sim.
 853
 854 2000-10-25  Geoff Keating  <geoffk@cygnus.com>
 855
 856         * MAINTAINERS: Added self and Andrew for the ppc sim.
 857
 858 Thu Jul 27 21:26:26 2000  Andrew Cagney  <cagney@b1.cygnus.com>
 859
 860         From Stephane Carrez <Stephane.Carrez@worldnet.fr>:
 861         * m68hc11: New directory.
 862         * configure.in: Add.
 863         * configure: Regenerate.
 864
 865 Tue Jul  4 13:43:54 2000  Andrew Cagney  <cagney@b1.cygnus.com>
 866
 867         * tic80: New directory.
 868         * configure.in: Add configury.
 869         * configure: Regenerate.
 870
 871 2000-04-20  Nick Clifton  <nickc@cygnus.com>
 872
 873         * configure.in (extra_subdirs): Add testsuite to strongarm
 874         directories.
 875         * configure: Regenerate.
 876
 877 Sat Mar  4 16:48:54 2000  Andrew Cagney  <cagney@b1.cygnus.com>
 878
 879         * MAINTAINERS: New file.  Blank.
 880
 881 1999-11-18  Ben Elliston  <bje@cygnus.com>
 882
 883         * configure.in: Require autoconf 2.13 and remove obsolete
 884         invocation of AC_C_CROSS.
 885         * configure: Regenerate.
 886
 887 1999-09-29  Doug Evans  <devans@casey.cygnus.com>
 888
 889         * configure.in: Configure the testsuite directory for thumb.
 890         * configure: Regenerate.
 891
 892 1999-07-16  Ben Elliston  <bje@cygnus.com>
 893
 894         * configure.in: Configure the testsuite directory for arm.
 895         * configure: Regenerate.
 896
 897 1999-04-08  Nick Clifton  <nickc@cygnus.com>
 898
 899         * configure.in: Add support for MCore target.
 900         * configure: Regenerate.
 901
 902 1999-03-14  Stan Shebs  <shebs@andros.cygnus.com>
 903
 904         * Makefile.in (FLAGS_TO_PASS, TARGET_FLAGS_TO_PASS): Remove
 905         RUNTEST instead of commenting out, fixes portability problem.
 906
 907 1999-02-08  Nick Clifton  <nickc@cygnus.com>
 908
 909         * configure.in: Add support for StrongARM target.
 910         * configure: Regenerate.
 911
 912 1999-01-04  Jason Molenda  (jsm@bugshack.cygnus.com)
 913
 914         * configure.in: Require autoconf 2.12.1 or higher.
 915
 916 1998-12-08  James E Wilson  <wilson@wilson-pc.cygnus.com>
 917
 918         * configure.in (i960-*-*): Add.
 919         * configure: Rebuild.
 920
 921 Wed Nov  4 19:11:43 1998  Dave Brolley  <brolley@cygnus.com>
 922
 923         * configure.in: Added case for fr30-*-*.
 924         * configure: Regenerated.
 925
 926 Fri Sep 25 10:12:19 1998  Christopher Faylor <cgf@cygnus.com>
 927
 928         * ppc/Makefile.in: Add EXEEXT to installed powerpc-eabi-run program
 929         to allow successful operation on Windows.
 930
 931 Thu May 28 14:59:46 1998 Jillian Ye <jillian@cygnus.com>
 932
 933         * Makefile.in: Take RUNTEST out of FLAGS_TO_PASS so that make
 934         check can be invoked recursively.
 935
 936 Wed Apr 29 12:38:53 1998  Mark Alexander  <marka@cygnus.com>
 937
 938         * configure.in: Build simulator on sparclite and sparc86x targets.
 939         * configure: Regenerate.
 940
 941 Sun Apr 26 15:21:01 1998  Tom Tromey  <tromey@cygnus.com>
 942
 943         * Makefile.in (autoconf-common autoheader-common): Don't pass -l
 944         to autoconf and autoheader.
 945
 946 Fri Apr 24 11:14:13 1998  Tom Tromey  <tromey@cygnus.com>
 947
 948         * Makefile.in (autoconf-common autoheader-common): Pass `-l
 949         ../common' to autoconf and autoheader.  Unconditionally run
 950         autoconf in every subdir.
 951         (autoconf-changelog autoheader-changelog): Unconditionally run
 952         commands in every subdir.
 953         (autoconf-install autoheader-install): Likewise.
 954
 955 Tue Mar 24 17:12:43 1998  Stu Grossman  <grossman@bhuna.cygnus.co.uk>
 956
 957         * Makefile.in:  Get SHELL from configure.
 958         * (FLAGS_TO_PASS):  Pass down SHELL.
 959         * configure:  Regenerate with autoconf 2.12.1 to fix shell issues for
 960         NT native builds.
 961
 962 Tue Mar 24 11::18:00 1998  Joyce Janczyn  <janczyn@cygnus.com>
 963
 964         * configure.in (extra_subdirs): Enable igen for mn10300.
 965         * configure: Re-generate.
 966
 967 Tue Dec  2 10:10:42 1997  Nick Clifton  <nickc@cygnus.com>
 968
 969         * configure.in (extra_subdirs): Add support for thumb target.
 970
 971         * configure (extra_subdirs): Add support for thumb target.
 972
 973 Wed Oct  8 12:38:48 1997  Andrew Cagney  <cagney@b1.cygnus.com>
 974
 975         * configure.in (extra_subdirs): Add IGEN directory when MIPS
 976         target.
 977         * configure: Regenerate.
 978
 979 Fri Sep 12 13:10:31 1997  Andrew Cagney  <cagney@b1.cygnus.com>
 980
 981         * configure.in (extra_subdirs): v850ea needs igen.
 982         * configure: Re-generate.
 983
 984 Mon Sep  1 16:48:23 1997  Andrew Cagney  <cagney@b1.cygnus.com>
 985
 986         * configure.in (testdir): When a testsuite directory, add that to
 987         the list of confdirs.
 988
 989 Tue Aug 19 11:17:46 1997  Andrew Cagney  <cagney@b1.cygnus.com>
 990
 991         * configure.in (extra_subdirs): Enable igen ready for V850.
 992
 993 Tue Aug 26 15:14:48 1997  Andrew Cagney  <cagney@b1.cygnus.com>
 994
 995         * configure.in (w65-*-*, only_if_enabled): Set.
 996         * configure: Re-generate.
 997
 998 Mon Aug 25 16:26:53 1997  Andrew Cagney  <cagney@b1.cygnus.com>
 999
1000         * configure.in (sparc*-*-*, only_if_enabled): Set
1001         only_if_enabled=yes.  Check only_if_enabled before enabling a
1002         simulator.
1003         * configure: Regenerate.
1004
1005 Mon Aug 18 10:56:59 1997  Nick Clifton  <nickc@cygnus.com>
1006
1007         * configure.in (extra_subdirs): Add v850e target.
1008
1009 Mon Aug 18 10:56:59 1997  Nick Clifton  <nickc@cygnus.com>
1010
1011         * configure.in (extra_subdirs): Add v850ea target.
1012
1013 Fri Jul 25 11:40:47 1997  Doug Evans  <dje@canuck.cygnus.com>
1014
1015         * configure.in (sparc*-*-*): Don't build erc32.
1016         * configure: Regenerate.
1017
1018 Thu Apr 24 00:47:20 1997  Doug Evans  <dje@canuck.cygnus.com>
1019
1020         * configure.in (m32r-*-*): New target.
1021         * configure: Regenerate.
1022
1023         * Makefile.in (autoconf-common, autoconf-changelog): Change $* to $@.
1024
1025 Mon Apr 21 22:57:55 1997  Andrew Cagney  <cagney@b1.cygnus.com>
1026
1027         * Makefile.in (.NOEXPORT, MAKEOVERRIDES): Moved to end, BSD make
1028         thought that .NOEXPORT was the default target.
1029
1030 Fri Apr 11 17:18:07 1997  Ian Lance Taylor  <ian@cygnus.com>
1031
1032         * Makefile.in (clean mostlyclean): Restore targets accidentally
1033         deleted in earlier change.
1034
1035 Thu Apr  3 12:20:32 1997  Andrew Cagney  <cagney@kremvax.cygnus.com>
1036
1037         * Makefile.in (autoheader-common, autoheader-changelog,
1038         autoheader-install): Perform autoheader in addition to autoconf.
1039
1040 Wed Apr  2 15:09:05 1997  Doug Evans  <dje@canuck.cygnus.com>
1041
1042         * Makefile.in (autoconf-install): New target.
1043         (autoconf-changelog): Try different way to obtain user name.
1044
1045 Wed Apr  2 14:25:52 1997  Andrew Cagney  <cagney@kremvax.cygnus.com>
1046
1047         * Makefile.in (autoconf-changelog): New target, update
1048         ChangeLog for all subdirectories - normally used after
1049         autoconf-common target.
1050
1051 Wed Mar 19 14:26:21 1997  Andrew Cagney  <cagney@kremvax.cygnus.com>
1052
1053         * configure.in (extra_subdirs): Include testsuite for d30v.
1054         * configure: Regenerate.
1055
1056         * Makefile.in (RUNTEST, RUNTESTFLAGS): Borrow test rules from
1057         ../gdb/Makefile.in
1058         (check): New rules - drive the testsuite.
1059
1060 Mon Mar  3 13:01:00 1997  Jeffrey A Law  (law@cygnus.com)
1061
1062         * configure.in: Add mn10200 configure lines accidentally
1063         removed.
1064         * configure: Regenerated.
1065
1066 Wed Feb 19 10:34:20 1997  Andrew Cagney  <cagney@critters.cygnus.com>
1067
1068         * configure.in (extra_subdirs): Generalize common sub directory
1069         into a list.
1070         (extra_subdirs): For d30v add igen to the list to be built.
1071
1072 Sun Feb 16 16:37:47 1997  Andrew Cagney  <cagney@critters.cygnus.com>
1073
1074         * configure.in (d30v): New target.
1075         * configure: Regenerated.
1076
1077 Wed Feb 19 23:17:13 1997  Jeffrey A Law  (law@cygnus.com)
1078
1079         * configure.in: Don't require GCC to build the mn10200
1080         simulator anymore.
1081         * configure: Rebuilt.
1082
1083 Wed Feb  5 13:28:13 1997  Doug Evans  <dje@canuck.cygnus.com>
1084
1085         * configure.in: Don't configure any subdirs if no simulator
1086         is being built.  Don't use erc32 for sparc64.
1087         * configure: Regenerated.
1088
1089 Tue Feb  4 13:19:39 1997  Doug Evans  <dje@canuck.cygnus.com>
1090
1091         * Makefile.in (autoconf-common): New target.
1092         * configure.in: Do configure common.
1093         * configure: Regenerated.
1094
1095 Thu Jan 23 13:59:52 1997  Stu Grossman  (grossman@critters.cygnus.com)
1096
1097         * configure configure.in:  Don't configure common anymore.  Files
1098         from common are now built in the individual simualtor directories.
1099         This fixes problems with the WinGDB build procedure.
1100
1101 Mon Jan 13 13:16:42 1997  Jeffrey A Law  (law@cygnus.com)
1102
1103         * configure: Enable the mn10200 simulator.
1104
1105 Wed Nov 20 01:00:36 1996  Doug Evans  <dje@canuck.cygnus.com>
1106
1107         * configure.in (configdirs): Add common.
1108         * configure: Regenerated.
1109
1110 Fri Nov  1 08:03:30 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
1111
1112         * configure.in (powerpc*-*-linux*): Treat like the other powerpc
1113         system V based targets.
1114         * configure: Regenerate.
1115
1116 Thu Oct 17 12:50:08 1996  Doug Evans  <dje@canuck.cygnus.com>
1117
1118         * configure.in (--enable-sim-powerpc): Delete.
1119         (--enable-sim): Add.
1120         * configure: Regenerated.
1121
1122 Fri Oct 11 21:13:43 1996  Jeffrey A Law  (law@cygnus.com)
1123
1124         * configure.in: Only build the V850 simulator if
1125         we are using gcc.
1126         * configure: Rebuild.
1127
1128 Sun Sep  8 17:22:50 1996  Ian Lance Taylor  <ian@cygnus.com>
1129
1130         * configure.in: Do build erc32 for DOS and Windows hosts.
1131         * configure: Rebuild.
1132
1133 Wed Sep  4 18:11:27 1996  Stu Grossman  (grossman@critters.cygnus.com)
1134
1135         * Makefile.in erc32/Makefile.in:  Don't set srcroot.  This should
1136         be inherited from the parent.  Remove INSTALL_XFORM and
1137         INSTALL_XFORM1.  Make INSTALL be set from configure.
1138
1139 Wed Sep  4 15:49:16 1996  Ian Lance Taylor  <ian@cygnus.com>
1140
1141         * configure.in: Only build the MIPS simulator if we are using
1142         gcc.
1143         * configure: Rebuild.
1144
1145 Wed Aug 28 19:05:23 1996  Jeffrey A Law  (law@cygnus.com)
1146
1147         * configure.in (v850-*-*): Added V850 simulator.
1148
1149 Thu Aug  1 17:08:41 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
1150
1151         * configure.in (d10v-*-*): Added D10V simulator.
1152
1153 Wed Jun 26 12:33:57 1996  Jason Molenda  (crash@godzilla.cygnus.co.jp)
1154
1155         * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir,
1156         INSTALL_PROGRAM, INSTALL_DATA): Use autoconf-set values.
1157         (docdir): Removed.
1158         * configure.in (AC_PREREQ): autoconf 2.5 or higher.
1159         (AC_PROG_INSTALL): Added.
1160         * configure: Rebuilt.
1161
1162 Mon Jun 24 14:18:26 1996  Ian Lance Taylor  <ian@cygnus.com>
1163
1164         * configure.in: Only configure erc32 if using gcc.
1165         * configure: Rebuild.
1166
1167 Tue Jun  4 09:24:21 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
1168
1169         * configure.in (sim_target): Build PowerPC simulator for powerpc
1170         System V.4, Solaris, and Elf targets.
1171         * configure: Regenerate with autoconf 2.10.
1172
1173 Wed May 22 12:10:49 1996  Rob Savoye  <rob@chinadoll>
1174
1175         * configure.in: Only built erc32 simulator on Unix hosts as it
1176         uses pseudo ttys.
1177         * configure: Regenerated with autoconf 2.8.
1178
1179 Sun May 19 20:20:40 1996  Rob Savoye  <rob@chinadoll.cygnus.com>
1180
1181         * erc32: Sparc simulator from the ESA.
1182
1183 Sun Apr  7 21:00:09 1996  Fred Fish  <fnf@cygnus.com>
1184
1185         From: Miles Bader  <miles@gnu.ai.mit.edu>
1186         * configure.in: Use AC_CHECK_TOOL to find AR & RANLIB.
1187         * configure: Regenerate using autoconf.
1188
1189 Thu Feb 22 11:31:50 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
1190
1191         * Makefile.in (install): Fix typo.
1192
1193 Wed Feb 21 11:59:57 1996  Ian Lance Taylor  <ian@cygnus.com>
1194
1195         * configure: Regenerate with autoconf 2.7.
1196
1197         * Makefile.in (all): Simplify.
1198         (clean, mostlyclean): SUBDIRS may contain whitespace; fix the loop
1199         as in the all target.
1200         (distclean, maintainer-clean, realclean): Likewise.
1201         (install): Likewise.
1202
1203 Thu Feb 15 18:37:00 1996  Fred Fish  <fnf@cygnus.com>
1204
1205         * Makefile.in (all): Remove extra '\' char from shell script.
1206
1207 Wed Feb 14 16:43:59 1996  Mike Meissner  <meissner@tiktok.cygnus.com>
1208
1209         * Makefile.in (all): Avoid a for loop with zero elements, even if
1210         the loop will not be executed because of an if statement.
1211
1212 Wed Jan 31 21:48:34 1996  Fred Fish  <fnf@cygnus.com>
1213
1214         * Makefile.in (install): Add missing semicolon in "fi \".
1215
1216 Thu Nov  9 16:10:56 1995  Michael Meissner  <meissner@tiktok.cygnus.com>
1217
1218         * Makefile.in (AR, CC, CFLAGS, CC_FOR_BUILD, RANLIB): Pick up
1219         defaults from configure.
1220
1221         * configure.in: Pick up AR, CC, CFLAGS, CC_FOR_BUILD, RANLIB using
1222         configure defaults.
1223         (powerpc*-*-eabi*): Build simulator for all powerpc eabi targets
1224         if either --enable-sim-powerpc is used, or the host compiler is
1225         GCC.
1226
1227 Wed Nov  8 15:46:49 1995  James G. Smith  <jsmith@pasanda.cygnus.co.uk>
1228
1229         * configure.in (mips*-*-*): Added "mips" simulator target.
1230         * configure: Re-generated.
1231
1232 Tue Oct 10 11:08:20 1995  Fred Fish  <fnf@cygnus.com>
1233
1234         * Makefile.in (BISON): Remove macro.
1235         (FLAGS_TO_PASS): Remove BISON.
1236
1237 Sun Oct  8 04:26:27 1995  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
1238
1239         * configure.in:  Explicitly `exit 0' for broken shells.
1240         * configure:  Rebuilt.
1241
1242 Fri Oct  6 12:03:27 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
1243
1244         * common/run.c (main): Initialize the callbacks.
1245
1246 Wed Sep 20 13:34:50 1995  Ian Lance Taylor  <ian@cygnus.com>
1247
1248         * Makefile.in (maintainer-clean): New synonym for realclean.
1249
1250 Fri Aug 25 11:53:43 1995  Michael Meissner  <meissner@tiktok.cygnus.com>
1251
1252         * configure.in (powerpc*-*-eabisim*): Only build the simulator if
1253         the target is powerpc*-*-eabisim*, since it requires GCC to build.
1254
1255 Mon Aug 21 17:53:48 1995  Michael Meissner  <meissner@tiktok.cygnus.com>
1256
1257         * configure.in (powerpc{,le}-*-*): Add psim from Andrew Cagney
1258         <cagney@highland.com.au>.
1259         * configure: Regnerate from configure.in.
1260
1261 Thu Aug  3 10:45:37 1995  Fred Fish  <fnf@cygnus.com>
1262
1263         * Update all FSF addresses except those in COPYING* files.
1264
1265 Thu Jul 20 15:17:29 1995  Fred Fish  <fnf@cygnus.com>
1266
1267         * Makefile.in (CC_FOR_BUILD):  Define default and arrange to pass
1268         submakes either default or passed in value.
1269
1270 Wed Jul  5 14:32:54 1995  J.T. Conklin  <jtc@rtl.cygnus.com>
1271
1272         * Makefile.in (all, clean, distclean, mostlyclean, realclean,
1273           install): Changed targets so that they descend all
1274           subdirectories in $(SUBDIRS).
1275           (*-all, *-clean, *-install): Removed targets.
1276
1277         * configure.in: Don't bother with target makefile fragments, they
1278           are no longer needed.
1279         * configure: regenerated.
1280
1281         * Makefile.in, configure.in: converted to autoconf.
1282         * configure: New file, generated with autconf 2.4.
1283
1284 Wed May 24 14:48:46 1995  Steve Chamberlain  <sac@slash.cygnus.com>
1285
1286         * Makefile.in: Support ARM.
1287         * configure.in: Ditto.
1288
1289 Sun Jan 15 16:53:47 1995  Steve Chamberlain  <sac@splat>
1290
1291         * Makefile.in: Support W65.
1292         * configure.in: Ditto.
1293
1294 Sun Mar 13 09:27:50 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
1295
1296         * Makefile.in: Add TAGS target.
1297
1298 Mon Sep 13 12:47:15 1993  K. Richard Pixley  (rich@sendai.cygnus.com)
1299
1300         * Makefile.in (all-z8k, install-z8k, clean-z8k, all-h8300,
1301           install-h8300, clean-h8300, all-h8500, install-h8500,
1302           clean-h8500, all-sh, install-sh, clean-sh): do not echo
1303           recursion lines.
1304
1305 Wed Jun 30 14:12:05 1993  david d `zoo' zuhn  (zoo at poseidon.cygnus.com)
1306
1307         * Makefile.in: remove endian.h trace from h8500
1308
1309 Sun Jun 13 13:08:58 1993  Jim Kingdon  (kingdon@cygnus.com)
1310
1311         * Makefile.in: Add distclean, realclean, and mostlyclean targets.
1312
1313 Fri May 21 11:21:16 1993  david d `zoo' zuhn  (zoo at cirdan.cygnus.com)
1314
1315         * Makefile.in: make all of the all-* target (except all-nothing)
1316         depend on endian.h, so that if we're not building a simulator, we
1317         don't built endian
1318
1319 Fri May 21 10:55:06 1993  Ian Lance Taylor  (ian@cygnus.com)
1320
1321         * Makefile.in (check, installcheck): Added dummy targets.
1322
1323 Mon May  3 21:39:43 1993  Fred Fish  (fnf@cygnus.com)
1324
1325         * Makefile.in (endian): Find endian.c in $(srcdir), and also
1326         explicitly make it, since some makes apparently don't work with
1327         VPATH and .c to executable rules (SunOS make for example).
1328
1329 Mon May  3 08:29:01 1993  Steve Chamberlain  (sac@thepub.cygnus.com)
1330
1331         * Makefile.in (endian): Add explicit rule for broken makes.
1332
1333 Mon Mar 15 15:47:53 1993  Ian Lance Taylor  (ian@cygnus.com)
1334
1335         * Makefile.in (info, install-info): New targets.
1336         (DO_INSTALL): Renamed from INSTALL, which is overridden by the top
1337         level Makefile.
1338
1339 Wed Feb 10 20:12:27 1993  K. Richard Pixley  (rich@ok.cygnus.com)
1340
1341         * Makefile.in (endian.h): build endian.h via a temporary file so
1342           that we don't leave an incomplete file lying around on
1343           interrupted builds.
1344           (clean): remove endian, e.h, and endian.h.
1345
1346 Mon Feb  8 11:46:06 1993  Steve Chamberlain  (sac@thepub.cygnus.com)
1347
1348         * Makefile.in, configure.in: if target isn't supported, build a
1349         harmless makefile.
1350
1351