1 2011-01-05 Mike Frysinger <vapier@gentoo.org>
3 * .gitignore: Add /*/hw-config.h.
5 2010-12-23 Mike Frysinger <vapier@gentoo.org>
7 * .gitignore: New file.
9 2010-07-28 DJ Delorie <dj@redhat.com>
11 * MAINTAINERS: Add self as RX maintainer. Sort list.
13 2010-06-08 Nick Clifton <nickc@redhat.com>
15 * reg.c (set_oszc): Use unsigned int for the mask.
16 (set_szc, set_osz, set_sz): Likewise.
18 2010-04-26 Mike Frysinger <vapier@gentoo.org>
20 * configure.ac: Target logic moved out to and included from ...
21 * configure.tgt: ... this new file.
22 * configure: Regenerated.
24 2010-04-12 Mike Frysinger <vapier@gentoo.org>
26 * README-HACKING: Add more sections.
28 2010-02-11 Doug Evans <dje@sebabeach.org>
30 * cris/cpuv10.h, * cris/cpuv32.h, * cris/cris-desc.c,
31 * cris/cris-desc.h, * cris/decodev10.c, * cris/decodev32.c,
32 * cris/modelv10.c, * cris/modelv32.c, * cris/semcrisv10f-switch.c,
33 * cris/semcrisv32f-switch.c: Regenerate.
35 2010-01-09 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
37 * avr/configure: Regenerate.
38 * cris/configure: Regenerate.
39 * microblaze/configure: Regenerate.
41 2010-01-02 Doug Evans <dje@sebabeach.org>
43 * cris/arch.c, * cris/arch.h, * cris/cpuall.h, * cris/cpuv10.c,
44 * cris/cpuv10.h, * cris/cpuv32.c, * cris/cpuv32.h, * cris/cris-desc.c,
45 * cris/cris-desc.h, * cris/cris-opc.h, * cris/decodev10.c,
46 * cris/decodev10.h, * cris/decodev32.c, * cris/decodev32.h,
47 * cris/modelv10.c, * cris/modelv32.c, * cris/semcrisv10f-switch.c,
48 * cris/semcrisv32f-switch.c: Regenerate, update copyright year.
50 2010-01-01 Doug Evans <dje@sebabeach.org>
52 * cris/mloop.in: Fix copyright year update snafu.
54 2009-11-24 Joel Brobecker <brobecker@adacore.com>
56 * common/aclocal.m4: Add include of ../../config/zlib.m4.
57 * common/common.m4: Use AM_ZLIB to check for zlib support.
58 * ppc/configure.ac: Likewise.
59 * arm/configure, avr/configure, common/configure, cr16/configure,
60 cris/configure, d10v/configure, erc32/configure, frv/configure,
61 h8300/configure, iq2000/configure, lm32/configure, m32c/configure,
62 m32r/configure, m68hc11/configure, mcore/configure,
63 microblaze/configure, mips/configure, mn10300/configure,
64 moxie/configure, ppc/configure, sh/configure, sh64/configure,
65 v850/configure: Regenerate.
67 2009-11-24 DJ Delorie <dj@redhat.com>
70 * configure.ac: Add entry for Renesas RX.
71 * configure: Regenerate.
73 2009-11-22 Doug Evans <dje@sebabeach.org>
75 * cris/cpuall.h: Regenerate.
76 * cris/cpuv10.h: Regenerate.
77 * cris/cpuv32.h: Regenerate.
78 * cris/decodev10.c: Regenerate.
79 * cris/decodev10.h: Regenerate.
80 * cris/decodev32.c: Regenerate.
81 * cris/decodev32.h: Regenerate.
83 2009-11-12 Tristan Gingold <gingold@adacore.com>
85 * avr/interp.c (sim_write): Allow byte access.
88 2009-11-12 Tristan Gingold <gingold@adacore.com>
90 * avr/interp.c (sim_load): Clear memory before loading.
92 2009-11-09 Tristan Gingold <gingold@adacore.com>
94 * avr/interp.c (sim_resume): Fix typo for OP_ret.
96 2009-10-23 Doug Evans <dje@sebabeach.org>
98 * cris/arch.c: Regenerate.
99 * cris/arch.h: Regenerate.
100 * cris/cpuall.h: Regenerate.
101 * cris/cpuv10.c: Regenerate.
102 * cris/cpuv10.h: Regenerate.
103 * cris/cpuv32.c: Regenerate.
104 * cris/cpuv32.h: Regenerate.
105 * cris/cris-desc.c: Regenerate.
106 * cris/cris-desc.h: Regenerate.
107 * cris/cris-opc.h: Regenerate.
108 * cris/decodev10.c: Regenerate.
109 * cris/decodev10.h: Regenerate.
110 * cris/decodev32.c: Regenerate.
111 * cris/decodev32.h: Regenerate.
112 * cris/modelv10.c: Regenerate.
113 * cris/modelv32.c: Regenerate.
114 * cris/semcrisv10f-switch.c: Regenerate.
115 * cris/semcrisv32f-switch.c: Regenerate.
117 2009-10-22 Tristan Gingold <gingold@adacore.com>
119 * avr/interp.c (sim_stop): Return 1.
121 2009-10-16 Doug Evans <dje@sebabeach.org>
123 * MAINTAINERS: Add myself as m32r maintainer.
125 2009-10-15 Michael Egaer <eager@eagercon.com>
127 * MAINTAINERS: Add self as MicroBlaze maintainer.
129 2009-10-14 Ben Elliston <bje@gnu.org>
131 * MAINTAINERS (common): Move myself to "past maintainers" section.
133 2009-10-06 Michael Eager <eager@eagercon.com>
135 * microblaze/interp.c: Add include microblaze-dis.h.
137 2009-09-23 Michael Eager <eager@eagercon.com>
139 * configure: Add microblaze-*.* (not regenerated).
140 * configure.ac: Likewise.
141 * microblaze/config.in: New.
142 * microblaze/configure: Generate.
143 * microblaze/configure.ac: New.
144 * microblaze/interp.c: New.
145 * microblaze/Makefile.in: New.
146 * microblaze/microblaze.h: New.
147 * microblaze/microblaze.isa: New.
148 * microblaze/sim-main.h: New.
149 * microblaze/sysdep.h: New.
151 2009-08-22 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
153 * avr/config.in: Regenerate.
154 * avr/configure: Likewise.
155 * configure: Likewise.
156 * cris/config.in: Likewise.
157 * cris/configure: Likewise.
159 * configure.ac: m4_include toplevel config/override.m4.
160 * configure: Regenerate.
161 * avr/configure: Regenerate.
162 * cris/configure: Regenerate.
164 2009-07-30 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
166 * Makefile.in (datarootdir): New variable.
168 2009-05-18 Jon Beniston <jon@beniston.com>
170 * MAINTAINERS: Add Jon Beniston as maintainer of lm32 sim.
171 * configure.ac: Add lm32 target.
172 * lm32: New directory.
174 2009-05-11 Andrew Cagney <cagney@gnu.org>
176 * MAINTAINERS: Orphan ppc.
178 2009-05-08 Kevin Buettner <kevinb@redhat.com>
180 * m32c/gdb-if.c (m32c_signal_to_host): Rename to
181 m32c_signal_to_target. Change signal return values from SIGILL,
182 SIGTRAP, SIGSEGV, etc. to TARGET_SIGNAL_ILL, TARGET_SIGNAL_TRAP,
183 TARGET_SIGNAL_SEGV, etc. Fix all callers.
185 2009-04-30 Anthony Green <green@moxielogic.com>
187 * MAINTAINERS: Add myself for the moxie port.
188 * moxie: New directory.
189 * configure.ac: Add entry for moxie.
190 * configure: Regenerate.
192 2009-04-27 Tristan Gingold <gingold@adacore.com>
194 * avr: New directory.
195 * avr/interp.c, avr/Makefile.in, avr/configure.ac: New files.
196 * avr/config.in: New file, generated by autoheader.
197 * avr/configure: New file generated by autoconf.
198 * configure.ac: Add avr.
199 * configure: Regenerated.
201 2009-04-17 Carlos O'Donell <carlos@codesourcery.com>
203 * Makefile.in: Add dummy install-pdf, html, and
204 install-html targets.
206 2009-01-18 Hans-Peter Nilsson <hp@axis.com>
208 * cris/sim-if.c: Include errno.h.
209 (cris_start_address, cris_program_offset): New variables.
210 (OPTION_CRIS_PROGRAM_OFFSET, OPTION_CRIS_STARTADDR): New option
212 (cris_options): New options --cris-program-offset and
213 --cris-start-address.
214 (cris_option_handler): Handle new options.
215 (cris_program_offset_write, cris_set_section_offset_iterator)
216 (cris_offset_sections, cris_offset_sections): New functions.
217 (sim_load): Use cris_program_offset_write as function argument to
218 cris_load_elf_file, not sim_write.
219 (struct offsetinfo): New struct.
220 (cris_handle_interpreter): Fix typo in comment.
221 (sim_open): Call cris_offset_sections as soon as the bfd of the
222 infile is available. Gate bfd validity checks on abfd non-NULL.
223 (sim_create_inferior): Let cris_start_address when != -1 override
224 other start-address choices.
226 2009-01-06 Hans-Peter Nilsson <hp@axis.com>
228 * cris/traps.c (abort): Define to call sim_io_error.
229 (create_map): Make -1 imply a non-fixed address, not 0. All
230 callers changed. Only prefer the next higher unmapped address if
231 the last mapped address is no less than 0x40000000. Check that
232 the address to be mapped is not already mapped. Update head
234 (unmap_pages): Don't call abort when recursive call fails, just
235 note and return an error if a page in the range couldn't be unmapped.
236 (cris_bmod_handler, h_supr_set_handler, h_supr_get_handler)
237 (schedule, make_first_thread, cris_pipe_empty): New local variable sd.
238 (cris_break_13_handler) <case TARGET_SYS_mmap2>: Handle
239 non-MAP_FIXED argument overlapping existing map. For MAP_FIXED,
240 don't abort on page not being mapped. Handle non-anon filemap
241 with length padded to pagesize.
243 2009-01-03 Hans-Peter Nilsson <hp@axis.com>
245 * cris/sim-if.c (TARGET_AT_NULL, TARGET_AT_PHDR, TARGET_AT_PHENT)
246 (TARGET_AT_PHNUM, TARGET_AT_PAGESZ, TARGET_AT_BASE)
247 (TARGET_AT_FLAGS, TARGET_AT_ENTRY, TARGET_AT_UID, TARGET_AT_EUID)
248 (TARGET_AT_GID, TARGET_AT_EGID, TARGET_AT_HWCAP)
249 (TARGET_AT_CLKTCK): Remove redundant macros.
250 (AUX_ENT): Adjust to use standard ELF AT_* macros.
251 (AUX_ENTF): Ditto. Remove always-0 middle argument. Update all
253 (sim_open): Also pass AT_SECURE.
255 * cris/sim-main.h (struct _sim_cpu): New member
256 set_target_thread_data.
257 * cris/crisv32f.c (CRIS_TLS_REGISTER): Define.
258 * cris/crisv10f.c: Ditto.
259 * cris/cris-tmpl.c (MY (set_target_thread_data)): New function.
260 (MY (f_specific_init)): Set new _sim_cpu member to new function.
261 * cris/traps.c (TARGET_SYS_set_thread_area): Define.
262 (cris_break_13_handler) <case TARGET_SYS_set_thread_area>: New
265 * cris/traps.c (TARGET_SYS_exit_group): Define.
266 (cris_break_13_handler): Handle it like the exit for the last
269 * cris/traps.c (TARGET_UTSNAME): Update to 2009-01-01.
270 (TARGET_EPOCH): Update to match TARGET_UTSNAME. Correct comment.
271 (cris_break_13_handler) <case TARGET_SYS_uname>: Update to
272 2.6.27. Set machine field to the BFD printable name of the
275 * cris/traps.c (TARGET_MAP_DENYWRITE): Define.
276 (cris_break_13_handler) <case TARGET_SYS_mmap2>: Handle
277 TARGET_MAP_DENYWRITE.
279 * cris/traps.c (TARGET_SYS_access, TARGET_R_OK, TARGET_W_OK)
280 (TARGET_X_OK, TARGET_F_OK): Define.
281 (cris_break_13_handler) <case TARGET_SYS_access>: New case.
283 * cris/semcrisv32f-switch.c: Regenerate.
285 2008-12-30 Hans-Peter Nilsson <hp@axis.com>
287 * cris/sim-if.c (sim_open): If sim_analyze_program fails, emit
288 just a short CRIS-specific notice. Tweak the wording for a
289 failing architecture test.
291 * cris/traps.c (TARGET_SYS_writev): New macro.
292 (is_mapped_only, cris_dump_map): New functions.
293 (cris_break_13_handler) <case TARGET_SYS_mmap2>: Handle more flags
294 and prot combinations and a non-zero page-offset. If
295 TARGET_MAP_FIXED, unmap pages before mapping them.
296 <case TARGET_SYS_mprotect>: When checking, allow any length
297 argument. Don't actually do anything.
298 <case TARGET_SYS_writev>: New case.
300 * cris/Makefile.in (SIM_OBJS): Remove sim-hload.o.
301 * cris/sim-if.c: Include elf-bfd.h.
302 (struct progbounds): New members end_loadmem, start_nonloadmem.
303 (xprintf, eprintf): New functions, copied from common/sim-load.c.
304 (cris_load_elf_file, sim_load, cris_get_progbounds): New functions.
305 (get_progbounds_iterator): Renamed from get_progbounds. Make
306 static. Update head comment. Set new struct progbounds members.
307 (exec_load_addr, interp_load_addr, interp_start_addr): New static
309 (aux_ent_phdr, aux_ent_phent, aux_ent_phnum, aux_ent_base)
310 (aux_ent_entry, cris_write_interp, cris_handle_interpreter): New
312 (sim_open): New constant array auxv_entries. Rewrite AUX_ENT
313 handling to use auxv_entries. Improve error message and checking
314 for invalid programs. Use new variable abfd for the program
315 instead of for each access reaching into sd to get it.
316 (sim_create_inferior): If non-zero, use interp_start_addr instead
317 of the program start address.
318 (cris_disassemble_insn): Remove incorrect and unclear, supposedly
319 stale comment. Always specify little-endian.
321 2008-07-29 Nick Clifton <nickc@redhat.com>
323 * common/genmloop.sh: Add new parameter: -shell to specify the
324 command interpreter to use to run the input file. This is
325 necessary because otherwise SHELL is taken from the user's
326 environment, and not from the makefile that invoked this script
327 and the user might not be running an sh-like shell.
328 * cris/Makefile.in: Pass -shell parameter to genmloop.sh.
329 * fr30/Makefile.in: Likewise.
330 * frv/Makefile.in: Likewise.
331 * i960/Makefile.in: Likewise.
332 * iq2000/Makefile.in: Likewise.
333 * m32r/Makefile.in: Likewise.
335 * frv/mloop.in: Add missing start of line comment marker.
337 2008-07-11 Hans-Peter Nilsson <hp@axis.com>
339 * cris/configure: Regenerate to track ../common/common.m4 changes.
340 * cris/config.in: Ditto.
342 2008-06-06 Vladimir Prus <vladimir@codesourcery.com>
343 Daniel Jacobowitz <dan@codesourcery.com>
344 Joseph Myers <joseph@codesourcery.com>
346 * cris/configure: Regenerate.
348 2008-05-09 Olivier Hainque <hainque@adacore.com>
350 * ppc/altivec.igen (vperm): Latch inputs into temporaries.
352 2008-03-25 M R Swami Reddy <MR.Swami.Reddy@nsc.com>
354 * MAINTAINERS: Add myself as maintainer of cr16 port.
356 2008-02-12 M Ranga Swami Reddy <MR.Swami.Reddy@nsc.com>
358 Add simulator for National cr16 processor.
359 * cr16: New directory.
360 * configure.ac: Add entry for National cr16.
361 * configure: Regenerate.
363 2008-02-05 DJ Delorie <dj@redhat.com>
365 * configure.ac (v850): V850 now has a testsuite.
366 * configure (v850): Likewise.
368 2008-01-01 Daniel Jacobowitz <dan@codesourcery.com>
370 Updated copyright notices for most files.
372 2007-12-19 DJ Delorie <dj@redhat.com>
374 * frv/frv.c (frvbf_cut): Only look at the six LSBs of
377 2007-10-22 Hans-Peter Nilsson <hp@axis.com>
379 * cris/arch.c, cris/arch.h, cris/cpuall.h, cris/cpuv10.c,
380 cris/cpuv10.h, cris/cpuv32.c, cris/cpuv32.h, cris/cris-desc.c,
381 cris/cris-desc.h, cris/cris-opc.h, cris/decodev10.c,
382 cris/decodev10.h, cris/decodev32.c, cris/decodev32.h,
383 cris/modelv10.c, cris/modelv32.c, cris/semcrisv10f-switch.c,
384 cris/semcrisv32f-switch.c: Regenerate.
386 2007-08-24 Joel Brobecker <brobecker@adacore.com>
388 Switch the license of all files explicitly copyright the FSF
391 2007-03-27 Brooks Moses <brooks.moses@codesourcery.com>
393 * Makefile.in: Add dummy "pdf" target.
395 2007-02-20 Hans-Peter Nilsson <hp@axis.com>
397 * cris/traps.c (dump_statistics): Change format for cycle numbers
398 to %llu and cast parameters to unsigned long long.
400 2007-02-16 Thiemo Seufer <ths@mips.com>
402 * Makefile.in (FLAGS_TO_PASS, TARGET_FLAGS_TO_PASS): Add RUNTEST.
404 2007-01-28 Manuel Lauss <slauss@resi.at>
406 * configure.ac (sh64-*-*): Change to sh64*-*-*.
407 (sh-*-*): Change to sh*-*-*.
408 * configure: Regenerated.
410 2007-01-09 Daniel Jacobowitz <dan@codesourcery.com>
412 Updated copyright notices for most files.
414 2006-12-20 Hans-Peter Nilsson <hp@axis.com>
416 * Makefile.in (autoconf-common autoheader-common): Only run
417 autoheader on subdirs with a file config.in.
419 * configure.ac (common): Make the default "yes" for all targets
421 * configure: Regenerate.
423 * Makefile.in (autoconf-common autoheader-common): In documented
424 usage, say SHELL=/bin/sh.
425 (.PHONY): Add autoheader-common.
427 * MAINTAINERS: Add self as authorized committer for *.
429 2006-10-02 Edgar E. Iglesias <edgar@axis.com>
430 Hans-Peter Nilsson <hp@axis.com>
432 * cris/cris-sim.h (enum cris_unknown_syscall_action_type)
433 (cris_unknown_syscall_action): Declare.
434 * cris/sim-if.c (cris_unknown_syscall_action): Define.
435 (cris_options): Add cris-unknown-syscall option.
436 (cris_option_handler): Correct comment about and error message for
437 invalid --cris-cycles argument. Handle --cris-unknown-syscall.
438 * cris/traps.c: Include stdarg.h
439 (cris_unknown_syscall): New function.
440 (cris_break_13_handler): Instead of sim_io_eprintf and
441 sim_engine_halt, call cris_unknown_syscall to handle more or less
442 unknown syscalls. Adjust code as necessary to handle return
445 2006-09-30 Daniel Jacobowitz <dan@codesourcery.com>
447 * MAINTAINERS: Add Dave Brolley for sh64.
449 2006-09-30 Hans-Peter Nilsson <hp@axis.com>
451 * cris/traps.c (TARGET_PIPE_BUF): New macro.
452 (cris_pipe_empty): Correct initialization of "remaining". Only
453 adjust the "write" return value if more than TARGET_PIPE_BUF bytes
456 2006-09-29 Hans-Peter Nilsson <hp@axis.com>
458 * cris/configure.ac: Check for limits.h and sys/param.h.
459 * cris/configure, cris/config.in: Rebuild.
460 * cris/traps.c (SIM_PATHMAX): New macro.
461 (cris_break_13_handler): Use SIM_PATHMAX, not MAXPATHLEN.
463 2006-08-08 Joel Sherrill <joel.sherrill@oarcorp.com>
465 * configure.ac (sparc-*-rtems*|sparc-*-elf*): Enable erc32 simulator.
466 * Makefile.in (FLAGS_TO_PASS): Include libdir.
467 * configure: Regenerated.
469 2006-06-05 Daniel Jacobowitz <dan@codesourcery.com>
471 * cris/configure: Regenerated.
473 2006-05-31 Daniel Jacobowitz <dan@codesourcery.com>
475 * cris/configure: Regenerated.
477 2006-05-05 Andreas Schwab <schwab@suse.de>
479 * configure.ac (CFLAGS_FOR_BUILD): Set and substitute.
480 * configure: Regenerate.
482 * Makefile.in (CFLAGS_FOR_BUILD): Define.
483 (CC_FOR_BUILD): Don't override.
484 (FLAGS_TO_PASS): Pass CFLAGS_FOR_BUILD.
486 2006-05-04 Daniel Jacobowitz <dan@codesourcery.com>
488 * MAINTAINERS: Add an "Authorized committers" section, and list
491 2006-04-08 Hans-Peter Nilsson <hp@axis.com>
493 * cris/crisv32f.c (MY (deliver_interrupt)): Set CCS to new_ccs.
495 2006-04-03 Hans-Peter Nilsson <hp@axis.com>
497 * cris/dv-cris.c, cris/dv-rv.c, cris/rvdummy.c: New files.
498 * cris/Makefile.in (CONFIG_DEVICES): Remove redundant setting.
499 (dv-cris.o, dv-rv.o rvdummy$(EXEEXT), rvdummy.o): New rules.
500 (all): Depend on rvdummy$(EXEEXT).
501 * cris/configure.ac: Call SIM_AC_OPTION_WARNINGS. Check for
502 sys/socket.h and sys/select.h. Call SIM_AC_OPTION_HARDWARE,
504 * cris/configure: Regenerate.
505 * cris/cris-sim.h (cris_have_900000xxif): Declare here.
506 (enum cris_interrupt_type, crisv10deliver_interrupt)
507 (crisv32deliver_interrupt: New declarations.
508 * cris/cris-tmpl.c [WITH_HW] (MY (f_model_insn_after)): Call
509 sim_events_tickn and set state-events member work_pending when it's
510 time for the next event.
511 [WITH_HW] (MY (f_specific_init)): Set CPU-model-specific
512 interrupt-delivery function.
513 * cris/crisv10f.c (MY (deliver_interrupt)): New function.
514 * cris/crisv32f.c (MY (deliver_interrupt)): New function.
515 * cris/devices.c: Include hw-device.h.
516 (device_io_read_buffer) [WITH_HW]: Call hw_io_read_buffer.
517 (device_io_write_buffer): Only perform 0x900000xx-functions if
518 cris_have_900000xxif is nonzero. Else if WITH_HW defined,
519 call hw_io_write_buffer. Add return 0 last in function.
520 * cris/sim-if.c (cris_have_900000xxif): Now global.
521 (sim_open) [WITH_HW]: Clear deliver_interrupt cpu member.
522 Force "-model" option, effectively.
523 * cris/sim-main.h (cris_interrupt_delivery_fn): New type.
524 (struct _sim_cpu) [WITH_HW]: New member deliver_interrupt.
526 2006-04-02 Hans-Peter Nilsson <hp@axis.com>
528 * cris/Makefile.in (CRISV10F_OBJS): Remove semcrisv10f-switch.o.
529 (CRISV32F_OBJS): Remove semcrisv32f-switch.o.
530 (semcrisv10f-switch.o, semcrisv32f-switch.o: Remove dependency rules.
532 2006-03-13 DJ Delorie <dj@redhat.com>
534 * MAINTAINERS: Add self as m32c sim maintainer.
536 2006-02-23 Hans-Peter Nilsson <hp@axis.com>
538 * cris/traps.c (syscall_map): Remove CB_SYS_time / TARGET_SYS_time
540 (cris_break_13_handler) <case TARGET_SYS_time>: New case.
542 2006-01-23 Jim Blandy <jimb@redhat.com>
544 Add simulator for Renesas M32C and M16C.
546 * m32c: New directory.
547 * configure.ac: Add entry for Renesas M32C.
548 * configure: Regenerate.
550 2006-01-10 Hans-Peter Nilsson <hp@axis.com>
552 * cris/cris-tmpl.c (MY (f_model_insn_before)): Only display basic
553 cycle count for the current insn.
555 2005-12-06 Hans-Peter Nilsson <hp@axis.com>
557 * cris/cpuv10.h, cris/cpuv32.h, cris/cris-desc.c, cris/cris-opc.h,
558 cris/decodev10.c, cris/decodev10.h, cris/decodev32.c,
559 cris/decodev32.h, cris/modelv10.c, cris/modelv32.c,
560 cris/semcrisv10f-switch.c, cris/semcrisv32f-switch.c: Regenerate.
562 2005-12-05 Hans-Peter Nilsson <hp@axis.com>
564 * cris/arch.c, cris/arch.h, cris/cpuall.h, cris/cpuv10.c,
565 cris/cpuv10.h, cris/cpuv32.c, cris/cpuv32.h, cris/cris-desc.c,
566 cris/cris-desc.h, cris/cris-opc.h, cris/decodev10.c,
567 cris/decodev10.h, cris/decodev32.c, cris/decodev32.h,
568 cris/modelv10.c, cris/modelv32.c, cris/semcrisv10f-switch.c,
569 cris/semcrisv32f-switch.c: Regenerate.
571 2005-11-20 Hans-Peter Nilsson <hp@axis.com>
573 * cris/traps.c (TARGET_O_RDONLY, TARGET_O_WRONLY): Define.
574 (open_map): Use TARGET_O_ACCMODE, TARGET_O_RDONLY and
576 (cris_break_13_handler) <case TARGET_SYS_fcntl>: Add support for
577 F_GETFL on fd 0, 1 and 2.
579 2005-11-17 Hans-Peter Nilsson <hp@axis.com>
581 * cris/sim-main.h (struct _sim_cpu): New members last_syscall,
582 last_open_fd, last_open_flags.
583 * cris/traps.c: Don't include targ-vals.h.
584 (TARGET_O_ACCMODE): Define.
585 (cris_break_13_handler): Set new _sim_cpu members.
586 <case TARGET_SYS_fcntl>: Support special case of F_GETFL.
587 Rearrange code as switch. Emit "unimplemented" abort for
588 unimplemented fcntl calls.
590 * cris/traps.c (TARGET_SYS_stat): Define.
591 (syscall_stat32_map): Add entry for TARGET_SYS_stat.
592 (cris_break_13_handler) <case TARGET_SYS_stat>: New case.
594 2005-11-16 Hans-Peter Nilsson <hp@axis.com>
596 * cris/cris-tmpl.c (MY (f_model_insn_before)): Make sure only the
597 low 32 bits are used after an unsigned long cast.
599 2005-05-28 Hans-Peter Nilsson <hp@axis.com>
601 * cris/Makefile.in (stamp-v32fmloop): Depend on stamp-v10fmloop.
603 2005-05-26 Chris Demetriou <cgd@netbsd.org>
605 * MAINTAINERS: Update my mail address, move myself to the
606 "Past maintainers" section.
608 2005-05-17 Corinna Vinschen <vinschen@redhat.com>
610 * configure.ac: Add igen to v850 build.
611 * configure: Regenerate.
613 2005-04-29 Paul Brook <paul@codesourcery.com>
615 * common/callback.c (PIPE_BUF): Provide default definition.
616 (os_lstat): Use stat if lstat is not available on the host.
617 (os_ftruncate): Return EINVAL if not available on the host.
618 (os_truncate): Ditto.
619 * common/configure.ac: Check for lstat, truncate and ftruncate.
620 * common/configure: Regenerate.
621 * common/config.in: Regenerate.
623 2005-04-27 Paul Brook <paul@codesourcery.com>
625 * common/Make-common.in: Add $(EXEEXT) to "run".
627 2005-04-18 Hans-Peter Nilsson <hp@axis.com>
629 * cris/traps.c (cris_break_13_handler) <case TARGET_SYS_mmap2>:
630 For ((len & 8191) != 0 && fd == (USI) -1), don't say this isn't
631 implemented. In call to create_map, pad length argument to 8k.
633 2005-04-15 Corinna Vinschen <vinschen@redhat.com>
635 * configure.ac: Add explicit sh64 case.
636 * configure: Regenerate.
638 2005-03-30 Paul Brook <paul@codesourcery.com>
640 * arm/wrapper.c: Provide SIGTRAP and SIGBUS.
642 2005-03-24 Hans-Peter Nilsson <hp@axis.com>
644 * cris/Makefile.in (stamp-v10fcpu, stamp-v32fcpu): Add kludge to
645 include cgen-ops.h in decodev10.c and decodev32.c.
646 * cris/sim-main.h: Don't include cgen-ops.h here.
647 * cris/arch.c, cris/arch.h, cris/cpuall.h, cris/cpuv10.c,
648 cris/cpuv10.h, cris/cpuv32.c, cris/cpuv32.h, cris/cris-desc.c,
649 cris/cris-desc.h, cris/cris-opc.h, cris/decodev10.c,
650 cris/decodev10.h, cris/decodev32.c, cris/decodev32.h,
651 cris/modelv10.c, cris/modelv32.c, cris/semcrisv10f-switch.c,
652 cris/semcrisv32f-switch.c: Regenerate.
654 * cris/traps.c (cris_break_13_handler) <case
655 TARGET_SYS_rt_sigaction>: Rename sa_handler, sa_flags,
656 sa_restorer, sa_mask_low, sa_mask_high to target_sa_handler etc.
658 2005-03-23 Mark Kettenis <kettenis@gnu.org>
660 * cris/configure: Regenerate.
662 2005-02-28 Jim Blandy <jimb@redhat.com>
664 * d10v/configure.ac, igen/configure.ac, m68hc11/configure.ac,
665 mips/configure.ac, mn10300/configure.ac, v850/configure.ac:
666 Regenerated, after change to common/aclocal.m4.
668 2005-02-18 Corinna Vinschen <vinschen@redhat.com>
670 * iq2000: New target subdirectory.
671 * configure.ac: Add iq2000 target.
672 * configure: Regenerate.
674 2005-01-29 Hans-Peter Nilsson <hp@axis.com>
676 * Makefile.in (all, clean mostlyclean, distclean maintainer-clean)
677 (realclean, install): Fail if subdir make failed.
679 2005-01-28 Hans-Peter Nilsson <hp@axis.com>
681 * cris: New directory, simulator for Axis Communications CRIS
682 including CRIS v32, CGEN-based.
683 * configure.ac: Add corresponding configury.
684 * configure: Regenerate.
686 2005-01-17 Andrew Cagney <cagney@gnu.org>
688 * configure.ac: For mips*-*-* and mn10300*-*-* configure the
689 common directory. Remove sparc*-*-* from list.
691 2005-01-11 Andrew Cagney <cagney@gnu.org>
693 * Makefile.in (autoconf-common autoheader-common): Add --force to
694 autoconf and autoheader.
695 (autoconf-common autoheader-common)
696 (autoconf-install autoheader-install): Check for configure.ac, not
698 * configure.ac: Delete AC_CONFIG_AUX_DIR.
699 * configure: Re-generate.
701 2005-01-07 Andrew Cagney <cagney@gnu.org>
703 * configure.ac: Replace configure.in. Requires autoconf 2.59 and
704 correctly calls AC_CONFIG_SUBDIRS.
705 * configure: Re-generate.
707 2004-12-01 Andrew Cagney <cagney@gnu.org>
709 * i960, h8500: Delete directory.
711 2004-11-12 Andrew Cagney <cagney@gnu.org>
713 * d30v, fr30, mn10200, z8k: Delete directory.
715 2004-03-10 Ben Elliston <bje@gnu.org>
717 * MAINTAINERS: Update my mail address.
719 2004-01-26 Chris Demetriou <cgd@broadcom.com>
721 * configure.in (mips*-*-*): Configure in testsuite.
722 * configure: Regenerate.
724 2003-10-08 Dave Brolley <brolley@redhat.com>
726 * configure.in: Move frv handling to alphabetically correct placement.
728 2003-09-03 Andreas Schwab <schwab@suse.de>
730 * Makefile.in (FLAGS_TO_PASS): Pass down $(bindir) and $(mandir).
732 2003-08-29 Dave Brolley <brolley@redhat.com>
734 * MAINTAINERS: Add myself as maintainer of the FRV port.
736 2003-08-20 Michael Snyder <msnyder@redhat.com>
737 Dave Brolley <brolley@redhat.com>
739 * frv/: New directory, simulator for the Fujitsu FRV.
740 * configure.in: Add frv configury.
741 * configure: Regenerate.
743 2003-08-10 Ben Elliston <bje@wasabisystems.com>
745 * MAINTAINERS: Update my mail address.
747 2003-08-09 Andrew Cagney <cagney@redhat.com>
749 * MAINTAINERS: Andrew Cagney (mips) and Geoff Keating (ppc) drop
750 maintenance. List igen and sh maintainers. Mention that target
751 and global maintainers pick up the slack.
753 2003-07-09 Michael Snyder <msnyder@redhat.com>
755 * configure.in: Add testsuite to extra_subdirs for sh.
756 * configure: Regenerate.
758 2003-01-23 Nick Clifton <nickc@redhat.com>
762 2002-04-02 Alexandre Oliva <aoliva@redhat.com>
764 * sh/gencode.c: Replace sh3e with sh2e except in fsqrt.
766 2002-08-24 Geoffrey Keating <geoffk@redhat.com>
768 * MAINTAINERS: Update my email address.
770 2002-07-17 Andrew Cagney <ac131313@redhat.com>
772 * w65/: Delete directory.
774 2002-07-16 Andrew Cagney <ac131313@redhat.com>
776 * configure.in (extra_subdirs): Mark fr30-*-* as obsolete.
777 * configure: Re-generate.
779 2002-07-13 Andrew Cagney <ac131313@redhat.com>
781 * configure.in (extra_subdirs): Mark d30v-*-* as obsolete.
782 * configure: Re-generate.
784 2002-06-16 Andrew Cagney <ac131313@redhat.com>
786 * Makefile.in (autoconf-changelog autoheader-changelog): Let name,
787 id, date and host to be overriden by NAME, ID, DATE and HOST
788 respectfully. Use ISO dates.
790 Thu Jun 6 12:34:13 2002 Andrew Cagney <cagney@redhat.com>
792 * Makefile.in (ChangeLog): New makefile variable.
793 * README-HACKING: Mention the ChangeLog makefile variable.
795 2002-06-01 Andrew Cagney <ac131313@redhat.com>
797 * tic80/: Delete directory.
799 2002-05-16 Stephane Carrez <stcarrez@nerim.fr>
801 * MAINTAINERS: Update my email address.
803 2002-03-06 Stephane Carrez <Stephane.Carrez@worldnet.fr>
805 * MAINTAINERS: Record self as maintainer of m68hc11 simulator.
807 2002-03-01 Frank Ch. Eigler <fche@redhat.com>
809 * MAINTAINERS: Record self as a co-maintainer of just common/.
811 2002-02-07 Nick Clifton <nickc@cambridge.redhat.com>
813 * MAINTAINERS: Point to GDB files describing overall maintaince
814 and check-in procedures.
816 2002-01-10 Nick Clifton <nickc@cambridge.redhat.com>
818 * MAINTAINERS: Add myself for ARM portions.
820 2001-10-19 Andrew Cagney <ac131313@redhat.com>
822 * configure.in: When Linux or NetBSD, enable PowerPC simulator.
823 * configure: Re-generate.
825 2001-02-16 Ben Elliston <bje@redhat.com>
827 * MAINTAINERS: Add myself for common portions.
829 2001-01-15 Chris Demetriou <cgd@broadcom.com>
831 * MAINTAINERS: Added self and Andrew for the mips sim.
833 2000-10-25 Geoff Keating <geoffk@cygnus.com>
835 * MAINTAINERS: Added self and Andrew for the ppc sim.
837 Thu Jul 27 21:26:26 2000 Andrew Cagney <cagney@b1.cygnus.com>
839 From Stephane Carrez <Stephane.Carrez@worldnet.fr>:
840 * m68hc11: New directory.
842 * configure: Regenerate.
844 Tue Jul 4 13:43:54 2000 Andrew Cagney <cagney@b1.cygnus.com>
846 * tic80: New directory.
847 * configure.in: Add configury.
848 * configure: Regenerate.
850 2000-04-20 Nick Clifton <nickc@cygnus.com>
852 * configure.in (extra_subdirs): Add testsuite to strongarm
854 * configure: Regenerate.
856 Sat Mar 4 16:48:54 2000 Andrew Cagney <cagney@b1.cygnus.com>
858 * MAINTAINERS: New file. Blank.
860 1999-11-18 Ben Elliston <bje@cygnus.com>
862 * configure.in: Require autoconf 2.13 and remove obsolete
863 invocation of AC_C_CROSS.
864 * configure: Regenerate.
866 1999-09-29 Doug Evans <devans@casey.cygnus.com>
868 * configure.in: Configure the testsuite directory for thumb.
869 * configure: Regenerate.
871 1999-07-16 Ben Elliston <bje@cygnus.com>
873 * configure.in: Configure the testsuite directory for arm.
874 * configure: Regenerate.
876 1999-04-08 Nick Clifton <nickc@cygnus.com>
878 * configure.in: Add support for MCore target.
879 * configure: Regenerate.
881 1999-03-14 Stan Shebs <shebs@andros.cygnus.com>
883 * Makefile.in (FLAGS_TO_PASS, TARGET_FLAGS_TO_PASS): Remove
884 RUNTEST instead of commenting out, fixes portability problem.
886 1999-02-08 Nick Clifton <nickc@cygnus.com>
888 * configure.in: Add support for StrongARM target.
889 * configure: Regenerate.
891 1999-01-04 Jason Molenda (jsm@bugshack.cygnus.com)
893 * configure.in: Require autoconf 2.12.1 or higher.
895 1998-12-08 James E Wilson <wilson@wilson-pc.cygnus.com>
897 * configure.in (i960-*-*): Add.
898 * configure: Rebuild.
900 Wed Nov 4 19:11:43 1998 Dave Brolley <brolley@cygnus.com>
902 * configure.in: Added case for fr30-*-*.
903 * configure: Regenerated.
905 Fri Sep 25 10:12:19 1998 Christopher Faylor <cgf@cygnus.com>
907 * ppc/Makefile.in: Add EXEEXT to installed powerpc-eabi-run program
908 to allow successful operation on Windows.
910 Thu May 28 14:59:46 1998 Jillian Ye <jillian@cygnus.com>
912 * Makefile.in: Take RUNTEST out of FLAGS_TO_PASS so that make
913 check can be invoked recursively.
915 Wed Apr 29 12:38:53 1998 Mark Alexander <marka@cygnus.com>
917 * configure.in: Build simulator on sparclite and sparc86x targets.
918 * configure: Regenerate.
920 Sun Apr 26 15:21:01 1998 Tom Tromey <tromey@cygnus.com>
922 * Makefile.in (autoconf-common autoheader-common): Don't pass -l
923 to autoconf and autoheader.
925 Fri Apr 24 11:14:13 1998 Tom Tromey <tromey@cygnus.com>
927 * Makefile.in (autoconf-common autoheader-common): Pass `-l
928 ../common' to autoconf and autoheader. Unconditionally run
929 autoconf in every subdir.
930 (autoconf-changelog autoheader-changelog): Unconditionally run
931 commands in every subdir.
932 (autoconf-install autoheader-install): Likewise.
934 Tue Mar 24 17:12:43 1998 Stu Grossman <grossman@bhuna.cygnus.co.uk>
936 * Makefile.in: Get SHELL from configure.
937 * (FLAGS_TO_PASS): Pass down SHELL.
938 * configure: Regenerate with autoconf 2.12.1 to fix shell issues for
941 Tue Mar 24 11::18:00 1998 Joyce Janczyn <janczyn@cygnus.com>
943 * configure.in (extra_subdirs): Enable igen for mn10300.
944 * configure: Re-generate.
946 Tue Dec 2 10:10:42 1997 Nick Clifton <nickc@cygnus.com>
948 * configure.in (extra_subdirs): Add support for thumb target.
950 * configure (extra_subdirs): Add support for thumb target.
952 Wed Oct 8 12:38:48 1997 Andrew Cagney <cagney@b1.cygnus.com>
954 * configure.in (extra_subdirs): Add IGEN directory when MIPS
956 * configure: Regenerate.
958 Fri Sep 12 13:10:31 1997 Andrew Cagney <cagney@b1.cygnus.com>
960 * configure.in (extra_subdirs): v850ea needs igen.
961 * configure: Re-generate.
963 Mon Sep 1 16:48:23 1997 Andrew Cagney <cagney@b1.cygnus.com>
965 * configure.in (testdir): When a testsuite directory, add that to
966 the list of confdirs.
968 Tue Aug 19 11:17:46 1997 Andrew Cagney <cagney@b1.cygnus.com>
970 * configure.in (extra_subdirs): Enable igen ready for V850.
972 Tue Aug 26 15:14:48 1997 Andrew Cagney <cagney@b1.cygnus.com>
974 * configure.in (w65-*-*, only_if_enabled): Set.
975 * configure: Re-generate.
977 Mon Aug 25 16:26:53 1997 Andrew Cagney <cagney@b1.cygnus.com>
979 * configure.in (sparc*-*-*, only_if_enabled): Set
980 only_if_enabled=yes. Check only_if_enabled before enabling a
982 * configure: Regenerate.
984 Mon Aug 18 10:56:59 1997 Nick Clifton <nickc@cygnus.com>
986 * configure.in (extra_subdirs): Add v850e target.
988 Mon Aug 18 10:56:59 1997 Nick Clifton <nickc@cygnus.com>
990 * configure.in (extra_subdirs): Add v850ea target.
992 Fri Jul 25 11:40:47 1997 Doug Evans <dje@canuck.cygnus.com>
994 * configure.in (sparc*-*-*): Don't build erc32.
995 * configure: Regenerate.
997 Thu Apr 24 00:47:20 1997 Doug Evans <dje@canuck.cygnus.com>
999 * configure.in (m32r-*-*): New target.
1000 * configure: Regenerate.
1002 * Makefile.in (autoconf-common, autoconf-changelog): Change $* to $@.
1004 Mon Apr 21 22:57:55 1997 Andrew Cagney <cagney@b1.cygnus.com>
1006 * Makefile.in (.NOEXPORT, MAKEOVERRIDES): Moved to end, BSD make
1007 thought that .NOEXPORT was the default target.
1009 Fri Apr 11 17:18:07 1997 Ian Lance Taylor <ian@cygnus.com>
1011 * Makefile.in (clean mostlyclean): Restore targets accidentally
1012 deleted in earlier change.
1014 Thu Apr 3 12:20:32 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
1016 * Makefile.in (autoheader-common, autoheader-changelog,
1017 autoheader-install): Perform autoheader in addition to autoconf.
1019 Wed Apr 2 15:09:05 1997 Doug Evans <dje@canuck.cygnus.com>
1021 * Makefile.in (autoconf-install): New target.
1022 (autoconf-changelog): Try different way to obtain user name.
1024 Wed Apr 2 14:25:52 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
1026 * Makefile.in (autoconf-changelog): New target, update
1027 ChangeLog for all subdirectories - normally used after
1028 autoconf-common target.
1030 Wed Mar 19 14:26:21 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
1032 * configure.in (extra_subdirs): Include testsuite for d30v.
1033 * configure: Regenerate.
1035 * Makefile.in (RUNTEST, RUNTESTFLAGS): Borrow test rules from
1037 (check): New rules - drive the testsuite.
1039 Mon Mar 3 13:01:00 1997 Jeffrey A Law (law@cygnus.com)
1041 * configure.in: Add mn10200 configure lines accidentally
1043 * configure: Regenerated.
1045 Wed Feb 19 10:34:20 1997 Andrew Cagney <cagney@critters.cygnus.com>
1047 * configure.in (extra_subdirs): Generalize common sub directory
1049 (extra_subdirs): For d30v add igen to the list to be built.
1051 Sun Feb 16 16:37:47 1997 Andrew Cagney <cagney@critters.cygnus.com>
1053 * configure.in (d30v): New target.
1054 * configure: Regenerated.
1056 Wed Feb 19 23:17:13 1997 Jeffrey A Law (law@cygnus.com)
1058 * configure.in: Don't require GCC to build the mn10200
1060 * configure: Rebuilt.
1062 Wed Feb 5 13:28:13 1997 Doug Evans <dje@canuck.cygnus.com>
1064 * configure.in: Don't configure any subdirs if no simulator
1065 is being built. Don't use erc32 for sparc64.
1066 * configure: Regenerated.
1068 Tue Feb 4 13:19:39 1997 Doug Evans <dje@canuck.cygnus.com>
1070 * Makefile.in (autoconf-common): New target.
1071 * configure.in: Do configure common.
1072 * configure: Regenerated.
1074 Thu Jan 23 13:59:52 1997 Stu Grossman (grossman@critters.cygnus.com)
1076 * configure configure.in: Don't configure common anymore. Files
1077 from common are now built in the individual simualtor directories.
1078 This fixes problems with the WinGDB build procedure.
1080 Mon Jan 13 13:16:42 1997 Jeffrey A Law (law@cygnus.com)
1082 * configure: Enable the mn10200 simulator.
1084 Wed Nov 20 01:00:36 1996 Doug Evans <dje@canuck.cygnus.com>
1086 * configure.in (configdirs): Add common.
1087 * configure: Regenerated.
1089 Fri Nov 1 08:03:30 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1091 * configure.in (powerpc*-*-linux*): Treat like the other powerpc
1092 system V based targets.
1093 * configure: Regenerate.
1095 Thu Oct 17 12:50:08 1996 Doug Evans <dje@canuck.cygnus.com>
1097 * configure.in (--enable-sim-powerpc): Delete.
1098 (--enable-sim): Add.
1099 * configure: Regenerated.
1101 Fri Oct 11 21:13:43 1996 Jeffrey A Law (law@cygnus.com)
1103 * configure.in: Only build the V850 simulator if
1105 * configure: Rebuild.
1107 Sun Sep 8 17:22:50 1996 Ian Lance Taylor <ian@cygnus.com>
1109 * configure.in: Do build erc32 for DOS and Windows hosts.
1110 * configure: Rebuild.
1112 Wed Sep 4 18:11:27 1996 Stu Grossman (grossman@critters.cygnus.com)
1114 * Makefile.in erc32/Makefile.in: Don't set srcroot. This should
1115 be inherited from the parent. Remove INSTALL_XFORM and
1116 INSTALL_XFORM1. Make INSTALL be set from configure.
1118 Wed Sep 4 15:49:16 1996 Ian Lance Taylor <ian@cygnus.com>
1120 * configure.in: Only build the MIPS simulator if we are using
1122 * configure: Rebuild.
1124 Wed Aug 28 19:05:23 1996 Jeffrey A Law (law@cygnus.com)
1126 * configure.in (v850-*-*): Added V850 simulator.
1128 Thu Aug 1 17:08:41 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1130 * configure.in (d10v-*-*): Added D10V simulator.
1132 Wed Jun 26 12:33:57 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
1134 * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir,
1135 INSTALL_PROGRAM, INSTALL_DATA): Use autoconf-set values.
1137 * configure.in (AC_PREREQ): autoconf 2.5 or higher.
1138 (AC_PROG_INSTALL): Added.
1139 * configure: Rebuilt.
1141 Mon Jun 24 14:18:26 1996 Ian Lance Taylor <ian@cygnus.com>
1143 * configure.in: Only configure erc32 if using gcc.
1144 * configure: Rebuild.
1146 Tue Jun 4 09:24:21 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1148 * configure.in (sim_target): Build PowerPC simulator for powerpc
1149 System V.4, Solaris, and Elf targets.
1150 * configure: Regenerate with autoconf 2.10.
1152 Wed May 22 12:10:49 1996 Rob Savoye <rob@chinadoll>
1154 * configure.in: Only built erc32 simulator on Unix hosts as it
1156 * configure: Regenerated with autoconf 2.8.
1158 Sun May 19 20:20:40 1996 Rob Savoye <rob@chinadoll.cygnus.com>
1160 * erc32: Sparc simulator from the ESA.
1162 Sun Apr 7 21:00:09 1996 Fred Fish <fnf@cygnus.com>
1164 From: Miles Bader <miles@gnu.ai.mit.edu>
1165 * configure.in: Use AC_CHECK_TOOL to find AR & RANLIB.
1166 * configure: Regenerate using autoconf.
1168 Thu Feb 22 11:31:50 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1170 * Makefile.in (install): Fix typo.
1172 Wed Feb 21 11:59:57 1996 Ian Lance Taylor <ian@cygnus.com>
1174 * configure: Regenerate with autoconf 2.7.
1176 * Makefile.in (all): Simplify.
1177 (clean, mostlyclean): SUBDIRS may contain whitespace; fix the loop
1178 as in the all target.
1179 (distclean, maintainer-clean, realclean): Likewise.
1180 (install): Likewise.
1182 Thu Feb 15 18:37:00 1996 Fred Fish <fnf@cygnus.com>
1184 * Makefile.in (all): Remove extra '\' char from shell script.
1186 Wed Feb 14 16:43:59 1996 Mike Meissner <meissner@tiktok.cygnus.com>
1188 * Makefile.in (all): Avoid a for loop with zero elements, even if
1189 the loop will not be executed because of an if statement.
1191 Wed Jan 31 21:48:34 1996 Fred Fish <fnf@cygnus.com>
1193 * Makefile.in (install): Add missing semicolon in "fi \".
1195 Thu Nov 9 16:10:56 1995 Michael Meissner <meissner@tiktok.cygnus.com>
1197 * Makefile.in (AR, CC, CFLAGS, CC_FOR_BUILD, RANLIB): Pick up
1198 defaults from configure.
1200 * configure.in: Pick up AR, CC, CFLAGS, CC_FOR_BUILD, RANLIB using
1202 (powerpc*-*-eabi*): Build simulator for all powerpc eabi targets
1203 if either --enable-sim-powerpc is used, or the host compiler is
1206 Wed Nov 8 15:46:49 1995 James G. Smith <jsmith@pasanda.cygnus.co.uk>
1208 * configure.in (mips*-*-*): Added "mips" simulator target.
1209 * configure: Re-generated.
1211 Tue Oct 10 11:08:20 1995 Fred Fish <fnf@cygnus.com>
1213 * Makefile.in (BISON): Remove macro.
1214 (FLAGS_TO_PASS): Remove BISON.
1216 Sun Oct 8 04:26:27 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1218 * configure.in: Explicitly `exit 0' for broken shells.
1219 * configure: Rebuilt.
1221 Fri Oct 6 12:03:27 1995 Jim Wilson <wilson@chestnut.cygnus.com>
1223 * common/run.c (main): Initialize the callbacks.
1225 Wed Sep 20 13:34:50 1995 Ian Lance Taylor <ian@cygnus.com>
1227 * Makefile.in (maintainer-clean): New synonym for realclean.
1229 Fri Aug 25 11:53:43 1995 Michael Meissner <meissner@tiktok.cygnus.com>
1231 * configure.in (powerpc*-*-eabisim*): Only build the simulator if
1232 the target is powerpc*-*-eabisim*, since it requires GCC to build.
1234 Mon Aug 21 17:53:48 1995 Michael Meissner <meissner@tiktok.cygnus.com>
1236 * configure.in (powerpc{,le}-*-*): Add psim from Andrew Cagney
1237 <cagney@highland.com.au>.
1238 * configure: Regnerate from configure.in.
1240 Thu Aug 3 10:45:37 1995 Fred Fish <fnf@cygnus.com>
1242 * Update all FSF addresses except those in COPYING* files.
1244 Thu Jul 20 15:17:29 1995 Fred Fish <fnf@cygnus.com>
1246 * Makefile.in (CC_FOR_BUILD): Define default and arrange to pass
1247 submakes either default or passed in value.
1249 Wed Jul 5 14:32:54 1995 J.T. Conklin <jtc@rtl.cygnus.com>
1251 * Makefile.in (all, clean, distclean, mostlyclean, realclean,
1252 install): Changed targets so that they descend all
1253 subdirectories in $(SUBDIRS).
1254 (*-all, *-clean, *-install): Removed targets.
1256 * configure.in: Don't bother with target makefile fragments, they
1257 are no longer needed.
1258 * configure: regenerated.
1260 * Makefile.in, configure.in: converted to autoconf.
1261 * configure: New file, generated with autconf 2.4.
1263 Wed May 24 14:48:46 1995 Steve Chamberlain <sac@slash.cygnus.com>
1265 * Makefile.in: Support ARM.
1266 * configure.in: Ditto.
1268 Sun Jan 15 16:53:47 1995 Steve Chamberlain <sac@splat>
1270 * Makefile.in: Support W65.
1271 * configure.in: Ditto.
1273 Sun Mar 13 09:27:50 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
1275 * Makefile.in: Add TAGS target.
1277 Mon Sep 13 12:47:15 1993 K. Richard Pixley (rich@sendai.cygnus.com)
1279 * Makefile.in (all-z8k, install-z8k, clean-z8k, all-h8300,
1280 install-h8300, clean-h8300, all-h8500, install-h8500,
1281 clean-h8500, all-sh, install-sh, clean-sh): do not echo
1284 Wed Jun 30 14:12:05 1993 david d `zoo' zuhn (zoo at poseidon.cygnus.com)
1286 * Makefile.in: remove endian.h trace from h8500
1288 Sun Jun 13 13:08:58 1993 Jim Kingdon (kingdon@cygnus.com)
1290 * Makefile.in: Add distclean, realclean, and mostlyclean targets.
1292 Fri May 21 11:21:16 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
1294 * Makefile.in: make all of the all-* target (except all-nothing)
1295 depend on endian.h, so that if we're not building a simulator, we
1298 Fri May 21 10:55:06 1993 Ian Lance Taylor (ian@cygnus.com)
1300 * Makefile.in (check, installcheck): Added dummy targets.
1302 Mon May 3 21:39:43 1993 Fred Fish (fnf@cygnus.com)
1304 * Makefile.in (endian): Find endian.c in $(srcdir), and also
1305 explicitly make it, since some makes apparently don't work with
1306 VPATH and .c to executable rules (SunOS make for example).
1308 Mon May 3 08:29:01 1993 Steve Chamberlain (sac@thepub.cygnus.com)
1310 * Makefile.in (endian): Add explicit rule for broken makes.
1312 Mon Mar 15 15:47:53 1993 Ian Lance Taylor (ian@cygnus.com)
1314 * Makefile.in (info, install-info): New targets.
1315 (DO_INSTALL): Renamed from INSTALL, which is overridden by the top
1318 Wed Feb 10 20:12:27 1993 K. Richard Pixley (rich@ok.cygnus.com)
1320 * Makefile.in (endian.h): build endian.h via a temporary file so
1321 that we don't leave an incomplete file lying around on
1323 (clean): remove endian, e.h, and endian.h.
1325 Mon Feb 8 11:46:06 1993 Steve Chamberlain (sac@thepub.cygnus.com)
1327 * Makefile.in, configure.in: if target isn't supported, build a