1 2010-04-12 Mike Frysinger <vapier@gentoo.org>
3 * README-HACKING: Add more sections.
5 2010-02-11 Doug Evans <dje@sebabeach.org>
7 * cris/cpuv10.h, * cris/cpuv32.h, * cris/cris-desc.c,
8 * cris/cris-desc.h, * cris/decodev10.c, * cris/decodev32.c,
9 * cris/modelv10.c, * cris/modelv32.c, * cris/semcrisv10f-switch.c,
10 * cris/semcrisv32f-switch.c: Regenerate.
12 2010-01-09 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
14 * avr/configure: Regenerate.
15 * cris/configure: Regenerate.
16 * microblaze/configure: Regenerate.
18 2010-01-02 Doug Evans <dje@sebabeach.org>
20 * cris/arch.c, * cris/arch.h, * cris/cpuall.h, * cris/cpuv10.c,
21 * cris/cpuv10.h, * cris/cpuv32.c, * cris/cpuv32.h, * cris/cris-desc.c,
22 * cris/cris-desc.h, * cris/cris-opc.h, * cris/decodev10.c,
23 * cris/decodev10.h, * cris/decodev32.c, * cris/decodev32.h,
24 * cris/modelv10.c, * cris/modelv32.c, * cris/semcrisv10f-switch.c,
25 * cris/semcrisv32f-switch.c: Regenerate, update copyright year.
27 2010-01-01 Doug Evans <dje@sebabeach.org>
29 * cris/mloop.in: Fix copyright year update snafu.
31 2009-11-24 Joel Brobecker <brobecker@adacore.com>
33 * common/aclocal.m4: Add include of ../../config/zlib.m4.
34 * common/common.m4: Use AM_ZLIB to check for zlib support.
35 * ppc/configure.ac: Likewise.
36 * arm/configure, avr/configure, common/configure, cr16/configure,
37 cris/configure, d10v/configure, erc32/configure, frv/configure,
38 h8300/configure, iq2000/configure, lm32/configure, m32c/configure,
39 m32r/configure, m68hc11/configure, mcore/configure,
40 microblaze/configure, mips/configure, mn10300/configure,
41 moxie/configure, ppc/configure, sh/configure, sh64/configure,
42 v850/configure: Regenerate.
44 2009-11-24 DJ Delorie <dj@redhat.com>
47 * configure.ac: Add entry for Renesas RX.
48 * configure: Regenerate.
50 2009-11-22 Doug Evans <dje@sebabeach.org>
52 * cris/cpuall.h: Regenerate.
53 * cris/cpuv10.h: Regenerate.
54 * cris/cpuv32.h: Regenerate.
55 * cris/decodev10.c: Regenerate.
56 * cris/decodev10.h: Regenerate.
57 * cris/decodev32.c: Regenerate.
58 * cris/decodev32.h: Regenerate.
60 2009-11-12 Tristan Gingold <gingold@adacore.com>
62 * avr/interp.c (sim_write): Allow byte access.
65 2009-11-12 Tristan Gingold <gingold@adacore.com>
67 * avr/interp.c (sim_load): Clear memory before loading.
69 2009-11-09 Tristan Gingold <gingold@adacore.com>
71 * avr/interp.c (sim_resume): Fix typo for OP_ret.
73 2009-10-23 Doug Evans <dje@sebabeach.org>
75 * cris/arch.c: Regenerate.
76 * cris/arch.h: Regenerate.
77 * cris/cpuall.h: Regenerate.
78 * cris/cpuv10.c: Regenerate.
79 * cris/cpuv10.h: Regenerate.
80 * cris/cpuv32.c: Regenerate.
81 * cris/cpuv32.h: Regenerate.
82 * cris/cris-desc.c: Regenerate.
83 * cris/cris-desc.h: Regenerate.
84 * cris/cris-opc.h: Regenerate.
85 * cris/decodev10.c: Regenerate.
86 * cris/decodev10.h: Regenerate.
87 * cris/decodev32.c: Regenerate.
88 * cris/decodev32.h: Regenerate.
89 * cris/modelv10.c: Regenerate.
90 * cris/modelv32.c: Regenerate.
91 * cris/semcrisv10f-switch.c: Regenerate.
92 * cris/semcrisv32f-switch.c: Regenerate.
94 2009-10-22 Tristan Gingold <gingold@adacore.com>
96 * avr/interp.c (sim_stop): Return 1.
98 2009-10-16 Doug Evans <dje@sebabeach.org>
100 * MAINTAINERS: Add myself as m32r maintainer.
102 2009-10-15 Michael Egaer <eager@eagercon.com>
104 * MAINTAINERS: Add self as MicroBlaze maintainer.
106 2009-10-14 Ben Elliston <bje@gnu.org>
108 * MAINTAINERS (common): Move myself to "past maintainers" section.
110 2009-10-06 Michael Eager <eager@eagercon.com>
112 * microblaze/interp.c: Add include microblaze-dis.h.
114 2009-09-23 Michael Eager <eager@eagercon.com>
116 * configure: Add microblaze-*.* (not regenerated).
117 * configure.ac: Likewise.
118 * microblaze/config.in: New.
119 * microblaze/configure: Generate.
120 * microblaze/configure.ac: New.
121 * microblaze/interp.c: New.
122 * microblaze/Makefile.in: New.
123 * microblaze/microblaze.h: New.
124 * microblaze/microblaze.isa: New.
125 * microblaze/sim-main.h: New.
126 * microblaze/sysdep.h: New.
128 2009-08-22 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
130 * avr/config.in: Regenerate.
131 * avr/configure: Likewise.
132 * configure: Likewise.
133 * cris/config.in: Likewise.
134 * cris/configure: Likewise.
136 * configure.ac: m4_include toplevel config/override.m4.
137 * configure: Regenerate.
138 * avr/configure: Regenerate.
139 * cris/configure: Regenerate.
141 2009-07-30 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
143 * Makefile.in (datarootdir): New variable.
145 2009-05-18 Jon Beniston <jon@beniston.com>
147 * MAINTAINERS: Add Jon Beniston as maintainer of lm32 sim.
148 * configure.ac: Add lm32 target.
149 * lm32: New directory.
151 2009-05-11 Andrew Cagney <cagney@gnu.org>
153 * MAINTAINERS: Orphan ppc.
155 2009-05-08 Kevin Buettner <kevinb@redhat.com>
157 * m32c/gdb-if.c (m32c_signal_to_host): Rename to
158 m32c_signal_to_target. Change signal return values from SIGILL,
159 SIGTRAP, SIGSEGV, etc. to TARGET_SIGNAL_ILL, TARGET_SIGNAL_TRAP,
160 TARGET_SIGNAL_SEGV, etc. Fix all callers.
162 2009-04-30 Anthony Green <green@moxielogic.com>
164 * MAINTAINERS: Add myself for the moxie port.
165 * moxie: New directory.
166 * configure.ac: Add entry for moxie.
167 * configure: Regenerate.
169 2009-04-27 Tristan Gingold <gingold@adacore.com>
171 * avr: New directory.
172 * avr/interp.c, avr/Makefile.in, avr/configure.ac: New files.
173 * avr/config.in: New file, generated by autoheader.
174 * avr/configure: New file generated by autoconf.
175 * configure.ac: Add avr.
176 * configure: Regenerated.
178 2009-04-17 Carlos O'Donell <carlos@codesourcery.com>
180 * Makefile.in: Add dummy install-pdf, html, and
181 install-html targets.
183 2009-01-18 Hans-Peter Nilsson <hp@axis.com>
185 * cris/sim-if.c: Include errno.h.
186 (cris_start_address, cris_program_offset): New variables.
187 (OPTION_CRIS_PROGRAM_OFFSET, OPTION_CRIS_STARTADDR): New option
189 (cris_options): New options --cris-program-offset and
190 --cris-start-address.
191 (cris_option_handler): Handle new options.
192 (cris_program_offset_write, cris_set_section_offset_iterator)
193 (cris_offset_sections, cris_offset_sections): New functions.
194 (sim_load): Use cris_program_offset_write as function argument to
195 cris_load_elf_file, not sim_write.
196 (struct offsetinfo): New struct.
197 (cris_handle_interpreter): Fix typo in comment.
198 (sim_open): Call cris_offset_sections as soon as the bfd of the
199 infile is available. Gate bfd validity checks on abfd non-NULL.
200 (sim_create_inferior): Let cris_start_address when != -1 override
201 other start-address choices.
203 2009-01-06 Hans-Peter Nilsson <hp@axis.com>
205 * cris/traps.c (abort): Define to call sim_io_error.
206 (create_map): Make -1 imply a non-fixed address, not 0. All
207 callers changed. Only prefer the next higher unmapped address if
208 the last mapped address is no less than 0x40000000. Check that
209 the address to be mapped is not already mapped. Update head
211 (unmap_pages): Don't call abort when recursive call fails, just
212 note and return an error if a page in the range couldn't be unmapped.
213 (cris_bmod_handler, h_supr_set_handler, h_supr_get_handler)
214 (schedule, make_first_thread, cris_pipe_empty): New local variable sd.
215 (cris_break_13_handler) <case TARGET_SYS_mmap2>: Handle
216 non-MAP_FIXED argument overlapping existing map. For MAP_FIXED,
217 don't abort on page not being mapped. Handle non-anon filemap
218 with length padded to pagesize.
220 2009-01-03 Hans-Peter Nilsson <hp@axis.com>
222 * cris/sim-if.c (TARGET_AT_NULL, TARGET_AT_PHDR, TARGET_AT_PHENT)
223 (TARGET_AT_PHNUM, TARGET_AT_PAGESZ, TARGET_AT_BASE)
224 (TARGET_AT_FLAGS, TARGET_AT_ENTRY, TARGET_AT_UID, TARGET_AT_EUID)
225 (TARGET_AT_GID, TARGET_AT_EGID, TARGET_AT_HWCAP)
226 (TARGET_AT_CLKTCK): Remove redundant macros.
227 (AUX_ENT): Adjust to use standard ELF AT_* macros.
228 (AUX_ENTF): Ditto. Remove always-0 middle argument. Update all
230 (sim_open): Also pass AT_SECURE.
232 * cris/sim-main.h (struct _sim_cpu): New member
233 set_target_thread_data.
234 * cris/crisv32f.c (CRIS_TLS_REGISTER): Define.
235 * cris/crisv10f.c: Ditto.
236 * cris/cris-tmpl.c (MY (set_target_thread_data)): New function.
237 (MY (f_specific_init)): Set new _sim_cpu member to new function.
238 * cris/traps.c (TARGET_SYS_set_thread_area): Define.
239 (cris_break_13_handler) <case TARGET_SYS_set_thread_area>: New
242 * cris/traps.c (TARGET_SYS_exit_group): Define.
243 (cris_break_13_handler): Handle it like the exit for the last
246 * cris/traps.c (TARGET_UTSNAME): Update to 2009-01-01.
247 (TARGET_EPOCH): Update to match TARGET_UTSNAME. Correct comment.
248 (cris_break_13_handler) <case TARGET_SYS_uname>: Update to
249 2.6.27. Set machine field to the BFD printable name of the
252 * cris/traps.c (TARGET_MAP_DENYWRITE): Define.
253 (cris_break_13_handler) <case TARGET_SYS_mmap2>: Handle
254 TARGET_MAP_DENYWRITE.
256 * cris/traps.c (TARGET_SYS_access, TARGET_R_OK, TARGET_W_OK)
257 (TARGET_X_OK, TARGET_F_OK): Define.
258 (cris_break_13_handler) <case TARGET_SYS_access>: New case.
260 * cris/semcrisv32f-switch.c: Regenerate.
262 2008-12-30 Hans-Peter Nilsson <hp@axis.com>
264 * cris/sim-if.c (sim_open): If sim_analyze_program fails, emit
265 just a short CRIS-specific notice. Tweak the wording for a
266 failing architecture test.
268 * cris/traps.c (TARGET_SYS_writev): New macro.
269 (is_mapped_only, cris_dump_map): New functions.
270 (cris_break_13_handler) <case TARGET_SYS_mmap2>: Handle more flags
271 and prot combinations and a non-zero page-offset. If
272 TARGET_MAP_FIXED, unmap pages before mapping them.
273 <case TARGET_SYS_mprotect>: When checking, allow any length
274 argument. Don't actually do anything.
275 <case TARGET_SYS_writev>: New case.
277 * cris/Makefile.in (SIM_OBJS): Remove sim-hload.o.
278 * cris/sim-if.c: Include elf-bfd.h.
279 (struct progbounds): New members end_loadmem, start_nonloadmem.
280 (xprintf, eprintf): New functions, copied from common/sim-load.c.
281 (cris_load_elf_file, sim_load, cris_get_progbounds): New functions.
282 (get_progbounds_iterator): Renamed from get_progbounds. Make
283 static. Update head comment. Set new struct progbounds members.
284 (exec_load_addr, interp_load_addr, interp_start_addr): New static
286 (aux_ent_phdr, aux_ent_phent, aux_ent_phnum, aux_ent_base)
287 (aux_ent_entry, cris_write_interp, cris_handle_interpreter): New
289 (sim_open): New constant array auxv_entries. Rewrite AUX_ENT
290 handling to use auxv_entries. Improve error message and checking
291 for invalid programs. Use new variable abfd for the program
292 instead of for each access reaching into sd to get it.
293 (sim_create_inferior): If non-zero, use interp_start_addr instead
294 of the program start address.
295 (cris_disassemble_insn): Remove incorrect and unclear, supposedly
296 stale comment. Always specify little-endian.
298 2008-07-29 Nick Clifton <nickc@redhat.com>
300 * common/genmloop.sh: Add new parameter: -shell to specify the
301 command interpreter to use to run the input file. This is
302 necessary because otherwise SHELL is taken from the user's
303 environment, and not from the makefile that invoked this script
304 and the user might not be running an sh-like shell.
305 * cris/Makefile.in: Pass -shell parameter to genmloop.sh.
306 * fr30/Makefile.in: Likewise.
307 * frv/Makefile.in: Likewise.
308 * i960/Makefile.in: Likewise.
309 * iq2000/Makefile.in: Likewise.
310 * m32r/Makefile.in: Likewise.
312 * frv/mloop.in: Add missing start of line comment marker.
314 2008-07-11 Hans-Peter Nilsson <hp@axis.com>
316 * cris/configure: Regenerate to track ../common/common.m4 changes.
317 * cris/config.in: Ditto.
319 2008-06-06 Vladimir Prus <vladimir@codesourcery.com>
320 Daniel Jacobowitz <dan@codesourcery.com>
321 Joseph Myers <joseph@codesourcery.com>
323 * cris/configure: Regenerate.
325 2008-05-09 Olivier Hainque <hainque@adacore.com>
327 * ppc/altivec.igen (vperm): Latch inputs into temporaries.
329 2008-03-25 M R Swami Reddy <MR.Swami.Reddy@nsc.com>
331 * MAINTAINERS: Add myself as maintainer of cr16 port.
333 2008-02-12 M Ranga Swami Reddy <MR.Swami.Reddy@nsc.com>
335 Add simulator for National cr16 processor.
336 * cr16: New directory.
337 * configure.ac: Add entry for National cr16.
338 * configure: Regenerate.
340 2008-02-05 DJ Delorie <dj@redhat.com>
342 * configure.ac (v850): V850 now has a testsuite.
343 * configure (v850): Likewise.
345 2008-01-01 Daniel Jacobowitz <dan@codesourcery.com>
347 Updated copyright notices for most files.
349 2007-12-19 DJ Delorie <dj@redhat.com>
351 * frv/frv.c (frvbf_cut): Only look at the six LSBs of
354 2007-10-22 Hans-Peter Nilsson <hp@axis.com>
356 * cris/arch.c, cris/arch.h, cris/cpuall.h, cris/cpuv10.c,
357 cris/cpuv10.h, cris/cpuv32.c, cris/cpuv32.h, cris/cris-desc.c,
358 cris/cris-desc.h, cris/cris-opc.h, cris/decodev10.c,
359 cris/decodev10.h, cris/decodev32.c, cris/decodev32.h,
360 cris/modelv10.c, cris/modelv32.c, cris/semcrisv10f-switch.c,
361 cris/semcrisv32f-switch.c: Regenerate.
363 2007-08-24 Joel Brobecker <brobecker@adacore.com>
365 Switch the license of all files explicitly copyright the FSF
368 2007-03-27 Brooks Moses <brooks.moses@codesourcery.com>
370 * Makefile.in: Add dummy "pdf" target.
372 2007-02-20 Hans-Peter Nilsson <hp@axis.com>
374 * cris/traps.c (dump_statistics): Change format for cycle numbers
375 to %llu and cast parameters to unsigned long long.
377 2007-02-16 Thiemo Seufer <ths@mips.com>
379 * Makefile.in (FLAGS_TO_PASS, TARGET_FLAGS_TO_PASS): Add RUNTEST.
381 2007-01-28 Manuel Lauss <slauss@resi.at>
383 * configure.ac (sh64-*-*): Change to sh64*-*-*.
384 (sh-*-*): Change to sh*-*-*.
385 * configure: Regenerated.
387 2007-01-09 Daniel Jacobowitz <dan@codesourcery.com>
389 Updated copyright notices for most files.
391 2006-12-20 Hans-Peter Nilsson <hp@axis.com>
393 * Makefile.in (autoconf-common autoheader-common): Only run
394 autoheader on subdirs with a file config.in.
396 * configure.ac (common): Make the default "yes" for all targets
398 * configure: Regenerate.
400 * Makefile.in (autoconf-common autoheader-common): In documented
401 usage, say SHELL=/bin/sh.
402 (.PHONY): Add autoheader-common.
404 * MAINTAINERS: Add self as authorized committer for *.
406 2006-10-02 Edgar E. Iglesias <edgar@axis.com>
407 Hans-Peter Nilsson <hp@axis.com>
409 * cris/cris-sim.h (enum cris_unknown_syscall_action_type)
410 (cris_unknown_syscall_action): Declare.
411 * cris/sim-if.c (cris_unknown_syscall_action): Define.
412 (cris_options): Add cris-unknown-syscall option.
413 (cris_option_handler): Correct comment about and error message for
414 invalid --cris-cycles argument. Handle --cris-unknown-syscall.
415 * cris/traps.c: Include stdarg.h
416 (cris_unknown_syscall): New function.
417 (cris_break_13_handler): Instead of sim_io_eprintf and
418 sim_engine_halt, call cris_unknown_syscall to handle more or less
419 unknown syscalls. Adjust code as necessary to handle return
422 2006-09-30 Daniel Jacobowitz <dan@codesourcery.com>
424 * MAINTAINERS: Add Dave Brolley for sh64.
426 2006-09-30 Hans-Peter Nilsson <hp@axis.com>
428 * cris/traps.c (TARGET_PIPE_BUF): New macro.
429 (cris_pipe_empty): Correct initialization of "remaining". Only
430 adjust the "write" return value if more than TARGET_PIPE_BUF bytes
433 2006-09-29 Hans-Peter Nilsson <hp@axis.com>
435 * cris/configure.ac: Check for limits.h and sys/param.h.
436 * cris/configure, cris/config.in: Rebuild.
437 * cris/traps.c (SIM_PATHMAX): New macro.
438 (cris_break_13_handler): Use SIM_PATHMAX, not MAXPATHLEN.
440 2006-08-08 Joel Sherrill <joel.sherrill@oarcorp.com>
442 * configure.ac (sparc-*-rtems*|sparc-*-elf*): Enable erc32 simulator.
443 * Makefile.in (FLAGS_TO_PASS): Include libdir.
444 * configure: Regenerated.
446 2006-06-05 Daniel Jacobowitz <dan@codesourcery.com>
448 * cris/configure: Regenerated.
450 2006-05-31 Daniel Jacobowitz <dan@codesourcery.com>
452 * cris/configure: Regenerated.
454 2006-05-05 Andreas Schwab <schwab@suse.de>
456 * configure.ac (CFLAGS_FOR_BUILD): Set and substitute.
457 * configure: Regenerate.
459 * Makefile.in (CFLAGS_FOR_BUILD): Define.
460 (CC_FOR_BUILD): Don't override.
461 (FLAGS_TO_PASS): Pass CFLAGS_FOR_BUILD.
463 2006-05-04 Daniel Jacobowitz <dan@codesourcery.com>
465 * MAINTAINERS: Add an "Authorized committers" section, and list
468 2006-04-08 Hans-Peter Nilsson <hp@axis.com>
470 * cris/crisv32f.c (MY (deliver_interrupt)): Set CCS to new_ccs.
472 2006-04-03 Hans-Peter Nilsson <hp@axis.com>
474 * cris/dv-cris.c, cris/dv-rv.c, cris/rvdummy.c: New files.
475 * cris/Makefile.in (CONFIG_DEVICES): Remove redundant setting.
476 (dv-cris.o, dv-rv.o rvdummy$(EXEEXT), rvdummy.o): New rules.
477 (all): Depend on rvdummy$(EXEEXT).
478 * cris/configure.ac: Call SIM_AC_OPTION_WARNINGS. Check for
479 sys/socket.h and sys/select.h. Call SIM_AC_OPTION_HARDWARE,
481 * cris/configure: Regenerate.
482 * cris/cris-sim.h (cris_have_900000xxif): Declare here.
483 (enum cris_interrupt_type, crisv10deliver_interrupt)
484 (crisv32deliver_interrupt: New declarations.
485 * cris/cris-tmpl.c [WITH_HW] (MY (f_model_insn_after)): Call
486 sim_events_tickn and set state-events member work_pending when it's
487 time for the next event.
488 [WITH_HW] (MY (f_specific_init)): Set CPU-model-specific
489 interrupt-delivery function.
490 * cris/crisv10f.c (MY (deliver_interrupt)): New function.
491 * cris/crisv32f.c (MY (deliver_interrupt)): New function.
492 * cris/devices.c: Include hw-device.h.
493 (device_io_read_buffer) [WITH_HW]: Call hw_io_read_buffer.
494 (device_io_write_buffer): Only perform 0x900000xx-functions if
495 cris_have_900000xxif is nonzero. Else if WITH_HW defined,
496 call hw_io_write_buffer. Add return 0 last in function.
497 * cris/sim-if.c (cris_have_900000xxif): Now global.
498 (sim_open) [WITH_HW]: Clear deliver_interrupt cpu member.
499 Force "-model" option, effectively.
500 * cris/sim-main.h (cris_interrupt_delivery_fn): New type.
501 (struct _sim_cpu) [WITH_HW]: New member deliver_interrupt.
503 2006-04-02 Hans-Peter Nilsson <hp@axis.com>
505 * cris/Makefile.in (CRISV10F_OBJS): Remove semcrisv10f-switch.o.
506 (CRISV32F_OBJS): Remove semcrisv32f-switch.o.
507 (semcrisv10f-switch.o, semcrisv32f-switch.o: Remove dependency rules.
509 2006-03-13 DJ Delorie <dj@redhat.com>
511 * MAINTAINERS: Add self as m32c sim maintainer.
513 2006-02-23 Hans-Peter Nilsson <hp@axis.com>
515 * cris/traps.c (syscall_map): Remove CB_SYS_time / TARGET_SYS_time
517 (cris_break_13_handler) <case TARGET_SYS_time>: New case.
519 2006-01-23 Jim Blandy <jimb@redhat.com>
521 Add simulator for Renesas M32C and M16C.
523 * m32c: New directory.
524 * configure.ac: Add entry for Renesas M32C.
525 * configure: Regenerate.
527 2006-01-10 Hans-Peter Nilsson <hp@axis.com>
529 * cris/cris-tmpl.c (MY (f_model_insn_before)): Only display basic
530 cycle count for the current insn.
532 2005-12-06 Hans-Peter Nilsson <hp@axis.com>
534 * cris/cpuv10.h, cris/cpuv32.h, cris/cris-desc.c, cris/cris-opc.h,
535 cris/decodev10.c, cris/decodev10.h, cris/decodev32.c,
536 cris/decodev32.h, cris/modelv10.c, cris/modelv32.c,
537 cris/semcrisv10f-switch.c, cris/semcrisv32f-switch.c: Regenerate.
539 2005-12-05 Hans-Peter Nilsson <hp@axis.com>
541 * cris/arch.c, cris/arch.h, cris/cpuall.h, cris/cpuv10.c,
542 cris/cpuv10.h, cris/cpuv32.c, cris/cpuv32.h, cris/cris-desc.c,
543 cris/cris-desc.h, cris/cris-opc.h, cris/decodev10.c,
544 cris/decodev10.h, cris/decodev32.c, cris/decodev32.h,
545 cris/modelv10.c, cris/modelv32.c, cris/semcrisv10f-switch.c,
546 cris/semcrisv32f-switch.c: Regenerate.
548 2005-11-20 Hans-Peter Nilsson <hp@axis.com>
550 * cris/traps.c (TARGET_O_RDONLY, TARGET_O_WRONLY): Define.
551 (open_map): Use TARGET_O_ACCMODE, TARGET_O_RDONLY and
553 (cris_break_13_handler) <case TARGET_SYS_fcntl>: Add support for
554 F_GETFL on fd 0, 1 and 2.
556 2005-11-17 Hans-Peter Nilsson <hp@axis.com>
558 * cris/sim-main.h (struct _sim_cpu): New members last_syscall,
559 last_open_fd, last_open_flags.
560 * cris/traps.c: Don't include targ-vals.h.
561 (TARGET_O_ACCMODE): Define.
562 (cris_break_13_handler): Set new _sim_cpu members.
563 <case TARGET_SYS_fcntl>: Support special case of F_GETFL.
564 Rearrange code as switch. Emit "unimplemented" abort for
565 unimplemented fcntl calls.
567 * cris/traps.c (TARGET_SYS_stat): Define.
568 (syscall_stat32_map): Add entry for TARGET_SYS_stat.
569 (cris_break_13_handler) <case TARGET_SYS_stat>: New case.
571 2005-11-16 Hans-Peter Nilsson <hp@axis.com>
573 * cris/cris-tmpl.c (MY (f_model_insn_before)): Make sure only the
574 low 32 bits are used after an unsigned long cast.
576 2005-05-28 Hans-Peter Nilsson <hp@axis.com>
578 * cris/Makefile.in (stamp-v32fmloop): Depend on stamp-v10fmloop.
580 2005-05-26 Chris Demetriou <cgd@netbsd.org>
582 * MAINTAINERS: Update my mail address, move myself to the
583 "Past maintainers" section.
585 2005-05-17 Corinna Vinschen <vinschen@redhat.com>
587 * configure.ac: Add igen to v850 build.
588 * configure: Regenerate.
590 2005-04-29 Paul Brook <paul@codesourcery.com>
592 * common/callback.c (PIPE_BUF): Provide default definition.
593 (os_lstat): Use stat if lstat is not available on the host.
594 (os_ftruncate): Return EINVAL if not available on the host.
595 (os_truncate): Ditto.
596 * common/configure.ac: Check for lstat, truncate and ftruncate.
597 * common/configure: Regenerate.
598 * common/config.in: Regenerate.
600 2005-04-27 Paul Brook <paul@codesourcery.com>
602 * common/Make-common.in: Add $(EXEEXT) to "run".
604 2005-04-18 Hans-Peter Nilsson <hp@axis.com>
606 * cris/traps.c (cris_break_13_handler) <case TARGET_SYS_mmap2>:
607 For ((len & 8191) != 0 && fd == (USI) -1), don't say this isn't
608 implemented. In call to create_map, pad length argument to 8k.
610 2005-04-15 Corinna Vinschen <vinschen@redhat.com>
612 * configure.ac: Add explicit sh64 case.
613 * configure: Regenerate.
615 2005-03-30 Paul Brook <paul@codesourcery.com>
617 * arm/wrapper.c: Provide SIGTRAP and SIGBUS.
619 2005-03-24 Hans-Peter Nilsson <hp@axis.com>
621 * cris/Makefile.in (stamp-v10fcpu, stamp-v32fcpu): Add kludge to
622 include cgen-ops.h in decodev10.c and decodev32.c.
623 * cris/sim-main.h: Don't include cgen-ops.h here.
624 * cris/arch.c, cris/arch.h, cris/cpuall.h, cris/cpuv10.c,
625 cris/cpuv10.h, cris/cpuv32.c, cris/cpuv32.h, cris/cris-desc.c,
626 cris/cris-desc.h, cris/cris-opc.h, cris/decodev10.c,
627 cris/decodev10.h, cris/decodev32.c, cris/decodev32.h,
628 cris/modelv10.c, cris/modelv32.c, cris/semcrisv10f-switch.c,
629 cris/semcrisv32f-switch.c: Regenerate.
631 * cris/traps.c (cris_break_13_handler) <case
632 TARGET_SYS_rt_sigaction>: Rename sa_handler, sa_flags,
633 sa_restorer, sa_mask_low, sa_mask_high to target_sa_handler etc.
635 2005-03-23 Mark Kettenis <kettenis@gnu.org>
637 * cris/configure: Regenerate.
639 2005-02-28 Jim Blandy <jimb@redhat.com>
641 * d10v/configure.ac, igen/configure.ac, m68hc11/configure.ac,
642 mips/configure.ac, mn10300/configure.ac, v850/configure.ac:
643 Regenerated, after change to common/aclocal.m4.
645 2005-02-18 Corinna Vinschen <vinschen@redhat.com>
647 * iq2000: New target subdirectory.
648 * configure.ac: Add iq2000 target.
649 * configure: Regenerate.
651 2005-01-29 Hans-Peter Nilsson <hp@axis.com>
653 * Makefile.in (all, clean mostlyclean, distclean maintainer-clean)
654 (realclean, install): Fail if subdir make failed.
656 2005-01-28 Hans-Peter Nilsson <hp@axis.com>
658 * cris: New directory, simulator for Axis Communications CRIS
659 including CRIS v32, CGEN-based.
660 * configure.ac: Add corresponding configury.
661 * configure: Regenerate.
663 2005-01-17 Andrew Cagney <cagney@gnu.org>
665 * configure.ac: For mips*-*-* and mn10300*-*-* configure the
666 common directory. Remove sparc*-*-* from list.
668 2005-01-11 Andrew Cagney <cagney@gnu.org>
670 * Makefile.in (autoconf-common autoheader-common): Add --force to
671 autoconf and autoheader.
672 (autoconf-common autoheader-common)
673 (autoconf-install autoheader-install): Check for configure.ac, not
675 * configure.ac: Delete AC_CONFIG_AUX_DIR.
676 * configure: Re-generate.
678 2005-01-07 Andrew Cagney <cagney@gnu.org>
680 * configure.ac: Replace configure.in. Requires autoconf 2.59 and
681 correctly calls AC_CONFIG_SUBDIRS.
682 * configure: Re-generate.
684 2004-12-01 Andrew Cagney <cagney@gnu.org>
686 * i960, h8500: Delete directory.
688 2004-11-12 Andrew Cagney <cagney@gnu.org>
690 * d30v, fr30, mn10200, z8k: Delete directory.
692 2004-03-10 Ben Elliston <bje@gnu.org>
694 * MAINTAINERS: Update my mail address.
696 2004-01-26 Chris Demetriou <cgd@broadcom.com>
698 * configure.in (mips*-*-*): Configure in testsuite.
699 * configure: Regenerate.
701 2003-10-08 Dave Brolley <brolley@redhat.com>
703 * configure.in: Move frv handling to alphabetically correct placement.
705 2003-09-03 Andreas Schwab <schwab@suse.de>
707 * Makefile.in (FLAGS_TO_PASS): Pass down $(bindir) and $(mandir).
709 2003-08-29 Dave Brolley <brolley@redhat.com>
711 * MAINTAINERS: Add myself as maintainer of the FRV port.
713 2003-08-20 Michael Snyder <msnyder@redhat.com>
714 Dave Brolley <brolley@redhat.com>
716 * frv/: New directory, simulator for the Fujitsu FRV.
717 * configure.in: Add frv configury.
718 * configure: Regenerate.
720 2003-08-10 Ben Elliston <bje@wasabisystems.com>
722 * MAINTAINERS: Update my mail address.
724 2003-08-09 Andrew Cagney <cagney@redhat.com>
726 * MAINTAINERS: Andrew Cagney (mips) and Geoff Keating (ppc) drop
727 maintenance. List igen and sh maintainers. Mention that target
728 and global maintainers pick up the slack.
730 2003-07-09 Michael Snyder <msnyder@redhat.com>
732 * configure.in: Add testsuite to extra_subdirs for sh.
733 * configure: Regenerate.
735 2003-01-23 Nick Clifton <nickc@redhat.com>
739 2002-04-02 Alexandre Oliva <aoliva@redhat.com>
741 * sh/gencode.c: Replace sh3e with sh2e except in fsqrt.
743 2002-08-24 Geoffrey Keating <geoffk@redhat.com>
745 * MAINTAINERS: Update my email address.
747 2002-07-17 Andrew Cagney <ac131313@redhat.com>
749 * w65/: Delete directory.
751 2002-07-16 Andrew Cagney <ac131313@redhat.com>
753 * configure.in (extra_subdirs): Mark fr30-*-* as obsolete.
754 * configure: Re-generate.
756 2002-07-13 Andrew Cagney <ac131313@redhat.com>
758 * configure.in (extra_subdirs): Mark d30v-*-* as obsolete.
759 * configure: Re-generate.
761 2002-06-16 Andrew Cagney <ac131313@redhat.com>
763 * Makefile.in (autoconf-changelog autoheader-changelog): Let name,
764 id, date and host to be overriden by NAME, ID, DATE and HOST
765 respectfully. Use ISO dates.
767 Thu Jun 6 12:34:13 2002 Andrew Cagney <cagney@redhat.com>
769 * Makefile.in (ChangeLog): New makefile variable.
770 * README-HACKING: Mention the ChangeLog makefile variable.
772 2002-06-01 Andrew Cagney <ac131313@redhat.com>
774 * tic80/: Delete directory.
776 2002-05-16 Stephane Carrez <stcarrez@nerim.fr>
778 * MAINTAINERS: Update my email address.
780 2002-03-06 Stephane Carrez <Stephane.Carrez@worldnet.fr>
782 * MAINTAINERS: Record self as maintainer of m68hc11 simulator.
784 2002-03-01 Frank Ch. Eigler <fche@redhat.com>
786 * MAINTAINERS: Record self as a co-maintainer of just common/.
788 2002-02-07 Nick Clifton <nickc@cambridge.redhat.com>
790 * MAINTAINERS: Point to GDB files describing overall maintaince
791 and check-in procedures.
793 2002-01-10 Nick Clifton <nickc@cambridge.redhat.com>
795 * MAINTAINERS: Add myself for ARM portions.
797 2001-10-19 Andrew Cagney <ac131313@redhat.com>
799 * configure.in: When Linux or NetBSD, enable PowerPC simulator.
800 * configure: Re-generate.
802 2001-02-16 Ben Elliston <bje@redhat.com>
804 * MAINTAINERS: Add myself for common portions.
806 2001-01-15 Chris Demetriou <cgd@broadcom.com>
808 * MAINTAINERS: Added self and Andrew for the mips sim.
810 2000-10-25 Geoff Keating <geoffk@cygnus.com>
812 * MAINTAINERS: Added self and Andrew for the ppc sim.
814 Thu Jul 27 21:26:26 2000 Andrew Cagney <cagney@b1.cygnus.com>
816 From Stephane Carrez <Stephane.Carrez@worldnet.fr>:
817 * m68hc11: New directory.
819 * configure: Regenerate.
821 Tue Jul 4 13:43:54 2000 Andrew Cagney <cagney@b1.cygnus.com>
823 * tic80: New directory.
824 * configure.in: Add configury.
825 * configure: Regenerate.
827 2000-04-20 Nick Clifton <nickc@cygnus.com>
829 * configure.in (extra_subdirs): Add testsuite to strongarm
831 * configure: Regenerate.
833 Sat Mar 4 16:48:54 2000 Andrew Cagney <cagney@b1.cygnus.com>
835 * MAINTAINERS: New file. Blank.
837 1999-11-18 Ben Elliston <bje@cygnus.com>
839 * configure.in: Require autoconf 2.13 and remove obsolete
840 invocation of AC_C_CROSS.
841 * configure: Regenerate.
843 1999-09-29 Doug Evans <devans@casey.cygnus.com>
845 * configure.in: Configure the testsuite directory for thumb.
846 * configure: Regenerate.
848 1999-07-16 Ben Elliston <bje@cygnus.com>
850 * configure.in: Configure the testsuite directory for arm.
851 * configure: Regenerate.
853 1999-04-08 Nick Clifton <nickc@cygnus.com>
855 * configure.in: Add support for MCore target.
856 * configure: Regenerate.
858 1999-03-14 Stan Shebs <shebs@andros.cygnus.com>
860 * Makefile.in (FLAGS_TO_PASS, TARGET_FLAGS_TO_PASS): Remove
861 RUNTEST instead of commenting out, fixes portability problem.
863 1999-02-08 Nick Clifton <nickc@cygnus.com>
865 * configure.in: Add support for StrongARM target.
866 * configure: Regenerate.
868 1999-01-04 Jason Molenda (jsm@bugshack.cygnus.com)
870 * configure.in: Require autoconf 2.12.1 or higher.
872 1998-12-08 James E Wilson <wilson@wilson-pc.cygnus.com>
874 * configure.in (i960-*-*): Add.
875 * configure: Rebuild.
877 Wed Nov 4 19:11:43 1998 Dave Brolley <brolley@cygnus.com>
879 * configure.in: Added case for fr30-*-*.
880 * configure: Regenerated.
882 Fri Sep 25 10:12:19 1998 Christopher Faylor <cgf@cygnus.com>
884 * ppc/Makefile.in: Add EXEEXT to installed powerpc-eabi-run program
885 to allow successful operation on Windows.
887 Thu May 28 14:59:46 1998 Jillian Ye <jillian@cygnus.com>
889 * Makefile.in: Take RUNTEST out of FLAGS_TO_PASS so that make
890 check can be invoked recursively.
892 Wed Apr 29 12:38:53 1998 Mark Alexander <marka@cygnus.com>
894 * configure.in: Build simulator on sparclite and sparc86x targets.
895 * configure: Regenerate.
897 Sun Apr 26 15:21:01 1998 Tom Tromey <tromey@cygnus.com>
899 * Makefile.in (autoconf-common autoheader-common): Don't pass -l
900 to autoconf and autoheader.
902 Fri Apr 24 11:14:13 1998 Tom Tromey <tromey@cygnus.com>
904 * Makefile.in (autoconf-common autoheader-common): Pass `-l
905 ../common' to autoconf and autoheader. Unconditionally run
906 autoconf in every subdir.
907 (autoconf-changelog autoheader-changelog): Unconditionally run
908 commands in every subdir.
909 (autoconf-install autoheader-install): Likewise.
911 Tue Mar 24 17:12:43 1998 Stu Grossman <grossman@bhuna.cygnus.co.uk>
913 * Makefile.in: Get SHELL from configure.
914 * (FLAGS_TO_PASS): Pass down SHELL.
915 * configure: Regenerate with autoconf 2.12.1 to fix shell issues for
918 Tue Mar 24 11::18:00 1998 Joyce Janczyn <janczyn@cygnus.com>
920 * configure.in (extra_subdirs): Enable igen for mn10300.
921 * configure: Re-generate.
923 Tue Dec 2 10:10:42 1997 Nick Clifton <nickc@cygnus.com>
925 * configure.in (extra_subdirs): Add support for thumb target.
927 * configure (extra_subdirs): Add support for thumb target.
929 Wed Oct 8 12:38:48 1997 Andrew Cagney <cagney@b1.cygnus.com>
931 * configure.in (extra_subdirs): Add IGEN directory when MIPS
933 * configure: Regenerate.
935 Fri Sep 12 13:10:31 1997 Andrew Cagney <cagney@b1.cygnus.com>
937 * configure.in (extra_subdirs): v850ea needs igen.
938 * configure: Re-generate.
940 Mon Sep 1 16:48:23 1997 Andrew Cagney <cagney@b1.cygnus.com>
942 * configure.in (testdir): When a testsuite directory, add that to
943 the list of confdirs.
945 Tue Aug 19 11:17:46 1997 Andrew Cagney <cagney@b1.cygnus.com>
947 * configure.in (extra_subdirs): Enable igen ready for V850.
949 Tue Aug 26 15:14:48 1997 Andrew Cagney <cagney@b1.cygnus.com>
951 * configure.in (w65-*-*, only_if_enabled): Set.
952 * configure: Re-generate.
954 Mon Aug 25 16:26:53 1997 Andrew Cagney <cagney@b1.cygnus.com>
956 * configure.in (sparc*-*-*, only_if_enabled): Set
957 only_if_enabled=yes. Check only_if_enabled before enabling a
959 * configure: Regenerate.
961 Mon Aug 18 10:56:59 1997 Nick Clifton <nickc@cygnus.com>
963 * configure.in (extra_subdirs): Add v850e target.
965 Mon Aug 18 10:56:59 1997 Nick Clifton <nickc@cygnus.com>
967 * configure.in (extra_subdirs): Add v850ea target.
969 Fri Jul 25 11:40:47 1997 Doug Evans <dje@canuck.cygnus.com>
971 * configure.in (sparc*-*-*): Don't build erc32.
972 * configure: Regenerate.
974 Thu Apr 24 00:47:20 1997 Doug Evans <dje@canuck.cygnus.com>
976 * configure.in (m32r-*-*): New target.
977 * configure: Regenerate.
979 * Makefile.in (autoconf-common, autoconf-changelog): Change $* to $@.
981 Mon Apr 21 22:57:55 1997 Andrew Cagney <cagney@b1.cygnus.com>
983 * Makefile.in (.NOEXPORT, MAKEOVERRIDES): Moved to end, BSD make
984 thought that .NOEXPORT was the default target.
986 Fri Apr 11 17:18:07 1997 Ian Lance Taylor <ian@cygnus.com>
988 * Makefile.in (clean mostlyclean): Restore targets accidentally
989 deleted in earlier change.
991 Thu Apr 3 12:20:32 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
993 * Makefile.in (autoheader-common, autoheader-changelog,
994 autoheader-install): Perform autoheader in addition to autoconf.
996 Wed Apr 2 15:09:05 1997 Doug Evans <dje@canuck.cygnus.com>
998 * Makefile.in (autoconf-install): New target.
999 (autoconf-changelog): Try different way to obtain user name.
1001 Wed Apr 2 14:25:52 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
1003 * Makefile.in (autoconf-changelog): New target, update
1004 ChangeLog for all subdirectories - normally used after
1005 autoconf-common target.
1007 Wed Mar 19 14:26:21 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
1009 * configure.in (extra_subdirs): Include testsuite for d30v.
1010 * configure: Regenerate.
1012 * Makefile.in (RUNTEST, RUNTESTFLAGS): Borrow test rules from
1014 (check): New rules - drive the testsuite.
1016 Mon Mar 3 13:01:00 1997 Jeffrey A Law (law@cygnus.com)
1018 * configure.in: Add mn10200 configure lines accidentally
1020 * configure: Regenerated.
1022 Wed Feb 19 10:34:20 1997 Andrew Cagney <cagney@critters.cygnus.com>
1024 * configure.in (extra_subdirs): Generalize common sub directory
1026 (extra_subdirs): For d30v add igen to the list to be built.
1028 Sun Feb 16 16:37:47 1997 Andrew Cagney <cagney@critters.cygnus.com>
1030 * configure.in (d30v): New target.
1031 * configure: Regenerated.
1033 Wed Feb 19 23:17:13 1997 Jeffrey A Law (law@cygnus.com)
1035 * configure.in: Don't require GCC to build the mn10200
1037 * configure: Rebuilt.
1039 Wed Feb 5 13:28:13 1997 Doug Evans <dje@canuck.cygnus.com>
1041 * configure.in: Don't configure any subdirs if no simulator
1042 is being built. Don't use erc32 for sparc64.
1043 * configure: Regenerated.
1045 Tue Feb 4 13:19:39 1997 Doug Evans <dje@canuck.cygnus.com>
1047 * Makefile.in (autoconf-common): New target.
1048 * configure.in: Do configure common.
1049 * configure: Regenerated.
1051 Thu Jan 23 13:59:52 1997 Stu Grossman (grossman@critters.cygnus.com)
1053 * configure configure.in: Don't configure common anymore. Files
1054 from common are now built in the individual simualtor directories.
1055 This fixes problems with the WinGDB build procedure.
1057 Mon Jan 13 13:16:42 1997 Jeffrey A Law (law@cygnus.com)
1059 * configure: Enable the mn10200 simulator.
1061 Wed Nov 20 01:00:36 1996 Doug Evans <dje@canuck.cygnus.com>
1063 * configure.in (configdirs): Add common.
1064 * configure: Regenerated.
1066 Fri Nov 1 08:03:30 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1068 * configure.in (powerpc*-*-linux*): Treat like the other powerpc
1069 system V based targets.
1070 * configure: Regenerate.
1072 Thu Oct 17 12:50:08 1996 Doug Evans <dje@canuck.cygnus.com>
1074 * configure.in (--enable-sim-powerpc): Delete.
1075 (--enable-sim): Add.
1076 * configure: Regenerated.
1078 Fri Oct 11 21:13:43 1996 Jeffrey A Law (law@cygnus.com)
1080 * configure.in: Only build the V850 simulator if
1082 * configure: Rebuild.
1084 Sun Sep 8 17:22:50 1996 Ian Lance Taylor <ian@cygnus.com>
1086 * configure.in: Do build erc32 for DOS and Windows hosts.
1087 * configure: Rebuild.
1089 Wed Sep 4 18:11:27 1996 Stu Grossman (grossman@critters.cygnus.com)
1091 * Makefile.in erc32/Makefile.in: Don't set srcroot. This should
1092 be inherited from the parent. Remove INSTALL_XFORM and
1093 INSTALL_XFORM1. Make INSTALL be set from configure.
1095 Wed Sep 4 15:49:16 1996 Ian Lance Taylor <ian@cygnus.com>
1097 * configure.in: Only build the MIPS simulator if we are using
1099 * configure: Rebuild.
1101 Wed Aug 28 19:05:23 1996 Jeffrey A Law (law@cygnus.com)
1103 * configure.in (v850-*-*): Added V850 simulator.
1105 Thu Aug 1 17:08:41 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1107 * configure.in (d10v-*-*): Added D10V simulator.
1109 Wed Jun 26 12:33:57 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
1111 * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir,
1112 INSTALL_PROGRAM, INSTALL_DATA): Use autoconf-set values.
1114 * configure.in (AC_PREREQ): autoconf 2.5 or higher.
1115 (AC_PROG_INSTALL): Added.
1116 * configure: Rebuilt.
1118 Mon Jun 24 14:18:26 1996 Ian Lance Taylor <ian@cygnus.com>
1120 * configure.in: Only configure erc32 if using gcc.
1121 * configure: Rebuild.
1123 Tue Jun 4 09:24:21 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1125 * configure.in (sim_target): Build PowerPC simulator for powerpc
1126 System V.4, Solaris, and Elf targets.
1127 * configure: Regenerate with autoconf 2.10.
1129 Wed May 22 12:10:49 1996 Rob Savoye <rob@chinadoll>
1131 * configure.in: Only built erc32 simulator on Unix hosts as it
1133 * configure: Regenerated with autoconf 2.8.
1135 Sun May 19 20:20:40 1996 Rob Savoye <rob@chinadoll.cygnus.com>
1137 * erc32: Sparc simulator from the ESA.
1139 Sun Apr 7 21:00:09 1996 Fred Fish <fnf@cygnus.com>
1141 From: Miles Bader <miles@gnu.ai.mit.edu>
1142 * configure.in: Use AC_CHECK_TOOL to find AR & RANLIB.
1143 * configure: Regenerate using autoconf.
1145 Thu Feb 22 11:31:50 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1147 * Makefile.in (install): Fix typo.
1149 Wed Feb 21 11:59:57 1996 Ian Lance Taylor <ian@cygnus.com>
1151 * configure: Regenerate with autoconf 2.7.
1153 * Makefile.in (all): Simplify.
1154 (clean, mostlyclean): SUBDIRS may contain whitespace; fix the loop
1155 as in the all target.
1156 (distclean, maintainer-clean, realclean): Likewise.
1157 (install): Likewise.
1159 Thu Feb 15 18:37:00 1996 Fred Fish <fnf@cygnus.com>
1161 * Makefile.in (all): Remove extra '\' char from shell script.
1163 Wed Feb 14 16:43:59 1996 Mike Meissner <meissner@tiktok.cygnus.com>
1165 * Makefile.in (all): Avoid a for loop with zero elements, even if
1166 the loop will not be executed because of an if statement.
1168 Wed Jan 31 21:48:34 1996 Fred Fish <fnf@cygnus.com>
1170 * Makefile.in (install): Add missing semicolon in "fi \".
1172 Thu Nov 9 16:10:56 1995 Michael Meissner <meissner@tiktok.cygnus.com>
1174 * Makefile.in (AR, CC, CFLAGS, CC_FOR_BUILD, RANLIB): Pick up
1175 defaults from configure.
1177 * configure.in: Pick up AR, CC, CFLAGS, CC_FOR_BUILD, RANLIB using
1179 (powerpc*-*-eabi*): Build simulator for all powerpc eabi targets
1180 if either --enable-sim-powerpc is used, or the host compiler is
1183 Wed Nov 8 15:46:49 1995 James G. Smith <jsmith@pasanda.cygnus.co.uk>
1185 * configure.in (mips*-*-*): Added "mips" simulator target.
1186 * configure: Re-generated.
1188 Tue Oct 10 11:08:20 1995 Fred Fish <fnf@cygnus.com>
1190 * Makefile.in (BISON): Remove macro.
1191 (FLAGS_TO_PASS): Remove BISON.
1193 Sun Oct 8 04:26:27 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1195 * configure.in: Explicitly `exit 0' for broken shells.
1196 * configure: Rebuilt.
1198 Fri Oct 6 12:03:27 1995 Jim Wilson <wilson@chestnut.cygnus.com>
1200 * common/run.c (main): Initialize the callbacks.
1202 Wed Sep 20 13:34:50 1995 Ian Lance Taylor <ian@cygnus.com>
1204 * Makefile.in (maintainer-clean): New synonym for realclean.
1206 Fri Aug 25 11:53:43 1995 Michael Meissner <meissner@tiktok.cygnus.com>
1208 * configure.in (powerpc*-*-eabisim*): Only build the simulator if
1209 the target is powerpc*-*-eabisim*, since it requires GCC to build.
1211 Mon Aug 21 17:53:48 1995 Michael Meissner <meissner@tiktok.cygnus.com>
1213 * configure.in (powerpc{,le}-*-*): Add psim from Andrew Cagney
1214 <cagney@highland.com.au>.
1215 * configure: Regnerate from configure.in.
1217 Thu Aug 3 10:45:37 1995 Fred Fish <fnf@cygnus.com>
1219 * Update all FSF addresses except those in COPYING* files.
1221 Thu Jul 20 15:17:29 1995 Fred Fish <fnf@cygnus.com>
1223 * Makefile.in (CC_FOR_BUILD): Define default and arrange to pass
1224 submakes either default or passed in value.
1226 Wed Jul 5 14:32:54 1995 J.T. Conklin <jtc@rtl.cygnus.com>
1228 * Makefile.in (all, clean, distclean, mostlyclean, realclean,
1229 install): Changed targets so that they descend all
1230 subdirectories in $(SUBDIRS).
1231 (*-all, *-clean, *-install): Removed targets.
1233 * configure.in: Don't bother with target makefile fragments, they
1234 are no longer needed.
1235 * configure: regenerated.
1237 * Makefile.in, configure.in: converted to autoconf.
1238 * configure: New file, generated with autconf 2.4.
1240 Wed May 24 14:48:46 1995 Steve Chamberlain <sac@slash.cygnus.com>
1242 * Makefile.in: Support ARM.
1243 * configure.in: Ditto.
1245 Sun Jan 15 16:53:47 1995 Steve Chamberlain <sac@splat>
1247 * Makefile.in: Support W65.
1248 * configure.in: Ditto.
1250 Sun Mar 13 09:27:50 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
1252 * Makefile.in: Add TAGS target.
1254 Mon Sep 13 12:47:15 1993 K. Richard Pixley (rich@sendai.cygnus.com)
1256 * Makefile.in (all-z8k, install-z8k, clean-z8k, all-h8300,
1257 install-h8300, clean-h8300, all-h8500, install-h8500,
1258 clean-h8500, all-sh, install-sh, clean-sh): do not echo
1261 Wed Jun 30 14:12:05 1993 david d `zoo' zuhn (zoo at poseidon.cygnus.com)
1263 * Makefile.in: remove endian.h trace from h8500
1265 Sun Jun 13 13:08:58 1993 Jim Kingdon (kingdon@cygnus.com)
1267 * Makefile.in: Add distclean, realclean, and mostlyclean targets.
1269 Fri May 21 11:21:16 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
1271 * Makefile.in: make all of the all-* target (except all-nothing)
1272 depend on endian.h, so that if we're not building a simulator, we
1275 Fri May 21 10:55:06 1993 Ian Lance Taylor (ian@cygnus.com)
1277 * Makefile.in (check, installcheck): Added dummy targets.
1279 Mon May 3 21:39:43 1993 Fred Fish (fnf@cygnus.com)
1281 * Makefile.in (endian): Find endian.c in $(srcdir), and also
1282 explicitly make it, since some makes apparently don't work with
1283 VPATH and .c to executable rules (SunOS make for example).
1285 Mon May 3 08:29:01 1993 Steve Chamberlain (sac@thepub.cygnus.com)
1287 * Makefile.in (endian): Add explicit rule for broken makes.
1289 Mon Mar 15 15:47:53 1993 Ian Lance Taylor (ian@cygnus.com)
1291 * Makefile.in (info, install-info): New targets.
1292 (DO_INSTALL): Renamed from INSTALL, which is overridden by the top
1295 Wed Feb 10 20:12:27 1993 K. Richard Pixley (rich@ok.cygnus.com)
1297 * Makefile.in (endian.h): build endian.h via a temporary file so
1298 that we don't leave an incomplete file lying around on
1300 (clean): remove endian, e.h, and endian.h.
1302 Mon Feb 8 11:46:06 1993 Steve Chamberlain (sac@thepub.cygnus.com)
1304 * Makefile.in, configure.in: if target isn't supported, build a