1 2021-04-26 Mike Frysinger <vapier@gentoo.org>
3 * m4/sim_ac_output.m4 (SIM_AC_OUTPUT): Require SIM_AC_OPTION_HARDWARE.
5 2021-04-23 Mike Frysinger <vapier@gentoo.org>
7 * README-HACKING (SIM_AC_OPTION_HARDWARE): Delete first two args.
8 * m4/sim_ac_option_hardware.m4 (SIM_AC_OPTION_HARDWARE): Replace [$1]
9 with yes. Delete test [$2]. Change [$3] to [$1]. Update comments.
11 2021-04-22 Tom Tromey <tom@tromey.com>
13 * m4/sim_ac_common.m4 (SIM_AC_COMMON): Don't check for sys/time.h
16 2021-04-22 Tom Tromey <tom@tromey.com>
18 * m4/sim_ac_common.m4 (SIM_AC_COMMON): Don't check for make.
20 2021-04-21 Simon Marchi <simon.marchi@polymtl.ca>
22 * m4/sim_ac_option_warnings.m4 (SIM_AC_OPTION_WARNINGS): Use
23 -Werror when probing for supported warning flags.
25 2021-04-18 Mike Frysinger <vapier@gentoo.org>
27 * m4/sim_ac_common.m4: Change AC_CHECK_HEADERS to
28 AC_CHECK_HEADERS_ONCE, merge calls, and sort args.
30 2021-04-18 Mike Frysinger <vapier@gentoo.org>
32 * m4/sim_ac_common.m4: Change AC_CHECK_FUNCS to AC_CHECK_FUNCS_ONCE,
33 merge calls, and sort args.
35 2021-04-03 Mike Frysinger <vapier@gentoo.org>
37 * configure.ac: Add --example-sims option.
38 * configure: Regenerate.
40 2021-04-03 Mike Frysinger <vapier@gentoo.org>
42 * Makefile.am (check_PROGRAMS, CLEANFILES, DISTCLEANFILES): Define.
43 * Makefile.in: Regenerated.
45 2021-04-03 Mike Frysinger <vapier@gentoo.org>
47 * Makefile.am (SIM_PRIMARY_TARGET, AM_MAKEFLAGS): Define.
48 * configure.ac: Add --enable-targets option. Define SIM_PRIMARY_TARGET
49 and SIM_TARGET. Rewrite case statement with SIM_TARGET calls.
50 * Makefile.in, configure: Regenerate.
52 2021-04-02 Mike Frysinger <vapier@gentoo.org>
54 * Makefile.am [SIM_ENABLE_IGEN]: Include igen/local.mk.
55 * configure.ac: Delete AC_CONFIG_SUBDIRS(igen) call.
56 (SIM_ENABLE_IGEN): Define.
57 * configure, Makefile.in: Regenerate.
59 2021-04-02 Mike Frysinger <vapier@gentoo.org>
61 * Makefile.am (ACLOCAL_AMFLAGS): Add -Im4.
62 (COMPILE_FOR_BUILD, LINK_FOR_BUILD): Define.
63 * configure.ac: Replace toolchain calls with SIM_AC_TOOLCHAIN.
64 * m4/sim_ac_common.m4 (SIM_AC_COMMON): Replace toolchain calls
65 with SIM_AC_TOOLCHAIN.
66 * m4/sim_ac_toolchain.m4: New file.
67 * aclocal.m4, configure, Makefile.in: Regenerate.
69 2021-03-08 Tom Tromey <tromey@adacore.com>
71 * aclocal.m4, configure, Makefile.in: Rebuild.
72 * configure.ac: Use AM_MAINTAINER_MODE.
74 2021-03-07 Mike Frysinger <vapier@gentoo.org>
76 * configure.ac (AC_CONFIG_FILES): Delete testsuite/Makefile.
77 * Makefile.am: Include testsuite/local.mk.
78 (AUTOMAKE_OPTIONS): Add dejagnu.
79 * configure, Makefile.in: Regenerated.
81 2021-03-07 Mike Frysinger <vapier@gentoo.org>
83 * Makefile.am: New file.
84 * configure.ac: Update AC_INIT call. Move AC_CANONICAL_SYSTEM after
85 it. Call AM_INIT_AUTOMAKE. Delete AC_CONFIG_MACRO_DIRS.
86 * aclocal.m4, configure, Makefile.in: Regenerated.
88 2021-02-28 Mike Frysinger <vapier@gentoo.org>
90 * m4/sim_ac_common.m4 (SIM_AC_COMMON): Delete CC_FOR_BUILD test.
91 Change CC_FOR_BUILD assignment. Define CFLAGS_FOR_BUILD.
93 2021-02-28 Mike Frysinger <vapier@gentoo.org>
95 * m4/sim_ac_common.m4 (SIM_AC_COMMON): Replace AR assignment and
96 AC_SUBST(AR) with call to AC_CHECK_TOOL(AR, ar).
98 2021-02-28 Mike Frysinger <vapier@gentoo.org>
100 * m4/sim_ac_common.m4 (SIM_AC_COMMON): Require AC_PROG_CPP.
102 2021-02-28 Mike Frysinger <vapier@gentoo.org>
104 * README-HACKING: Delete SIM_EXTRA_LIBDEPS.
106 2021-02-27 Mike Frysinger <vapier@gentoo.org>
108 * README-HACKING: Delete SIM_EXTRA_ALL.
110 2021-02-21 Mike Frysinger <vapier@gentoo.org>
112 * m4/sim_ac_common.m4, m4/sim_ac_option_alignment.m4,
113 m4/sim_ac_option_assert.m4, m4/sim_ac_option_bitsize.m4,
114 m4/sim_ac_option_cgen_maint.m4, m4/sim_ac_option_default_model.m4,
115 m4/sim_ac_option_endian.m4, m4/sim_ac_option_environment.m4,
116 m4/sim_ac_option_float.m4, m4/sim_ac_option_hardware.m4,
117 m4/sim_ac_option_inline.m4, m4/sim_ac_option_reserved_bits.m4,
118 m4/sim_ac_option_scache.m4, m4/sim_ac_option_smp.m4,
119 m4/sim_ac_option_warnings.m4, m4/sim_ac_option_xor_endian.m4,
120 m4/sim_ac_output.m4: New files.
122 2021-02-20 Mike Frysinger <vapier@gentoo.org>
124 * configure.tgt: Move arch list ...
125 * configure.ac: ... here.
126 * configure: Regenerate.
128 2021-02-19 Nelson Chu <nelson.chu@sifive.com>
131 * riscv/sim-main.c (execute_i): Updated encoding macros.
133 2021-02-13 Mike Frysinger <vapier@gentoo.org>
135 * configure.tgt: Delete call to AC_SUBST(sim_arch).
136 * configure: Regenerate.
138 2021-02-13 Mike Frysinger <vapier@gentoo.org>
140 * README-HACKING: Replace sinclude with AC_CONFIG_MACRO_DIRS in
141 configure.ac skeleton.
143 2021-02-06 Mike Frysinger <vapier@gentoo.org>
145 * README-HACKING: Replace STATE_WATCHPOINTS with CPU_PC_FETCH.
147 2021-02-06 Mike Frysinger <vapier@gentoo.org>
149 * configure.ac (HDEFINES): Delete AC_SUBST call.
150 * configure: Regenerate.
152 2021-02-04 Mike Frysinger <vapier@gentoo.org>
154 * configure.tgt (sim_arch): Add entry for riscv*-*-*.
155 * configure: Regenerate.
157 2021-01-30 Mike Frysinger <vapier@gentoo.org>
159 * Makefile.in (nltvals): Change to gennltvals.py.
161 2021-01-30 Mike Frysinger <vapier@gentoo.org>
163 * README-HACKING: Delete reference to sizeof_pc.
165 2021-01-29 Mike Frysinger <vapier@gentoo.org>
167 * MAINTAINERS (Global Maintainers): Move myself back.
169 2021-01-18 Mike Frysinger <vapier@gentoo.org>
171 * configure.ac: Call AC_PROG_CPP.
172 * configure: Regenerate.
173 * Makefile.in (abs_srcdir, srcroot, CPP): Define.
174 (nltvals): New target.
175 * README-HACKING: Change headers to nltvals.
177 2021-01-18 Mike Frysinger <vapier@gentoo.org>
179 * Makefile.in (headers): Change args to gennltvals.sh.
180 * gennltvals.sh: Rewrite from scratch.
181 * gentvals.sh: Delete.
182 * nltvals.def: Regen.
184 2021-01-15 Mike Frysinger <vapier@gentoo.org>
186 * configure.ac: Delete AC_CONFIG_SUBDIRS(testsuite) call.
187 Add AC_CONFIG_FILES([Makefile testsuite/Makefile]) call.
188 Drop argument to AC_OUTPUT.
189 * configure: Regenerate.
191 2021-01-12 Mike Frysinger <vapier@gentoo.org>
193 * README-HACKING (SIM_RUN_OBJS): Delete.
195 2021-01-09 Mike Frysinger <vapier@gentoo.org>
197 * MAINTAINERS (sh64): Move to past maintainers.
198 * configure: Regenerate.
199 * configure.tgt (sh64*-*-*): Delete.
202 2021-01-09 Mike Frysinger <vapier@gentoo.org>
204 * README-HACKING (AC_PREREQ): Delete.
206 2021-01-08 Mike Frysinger <vapier@gentoo.org>
208 * README-HACKING (C Language Assumptions): Require C11 compiler.
210 2020-09-03 Jose E. Marchesi <jose.marchesi@oracle.com>
212 * configure.ac: Do not configure sim/testsuite nor sim/igen if the
213 primary target doesn't have a simulator.
214 * configure: Regenerate.
216 2020-08-04 Jose E. Marchesi <jose.marchesi@oracle.com>
217 David Faust <david.faust@oracle.com>
219 * configure.tgt (sim_arch): Add entry for bpf-*-*.
220 * configure: Regenerate.
221 * MAINTAINERS: Add maintainer for the BPF simulator.
223 2019-12-19 Tom Tromey <tromey@adacore.com>
226 * Makefile.in (install-strip): New target.
228 2019-09-23 Dimitar Dimitrov <dimitar@dinux.eu>
230 * MAINTAINERS: Add myself as PRU maintainer.
231 * configure: Regenerated.
232 * configure.tgt: Add PRU.
234 2019-09-18 Alan Modra <amodra@gmail.com>
236 * common/sim-load.c, * common/sim-utils.c, * cris/sim-if.c,
237 * erc32/func.c, * lm32/sim-if.c, * m32c/load.c, * m32c/trace.c,
238 * m68hc11/interp.c, * ppc/hw_htab.c, * ppc/hw_init.c,
239 * rl78/load.c, * rl78/trace.c, * rx/gdb-if.c, * rx/load.c,
240 * rx/trace.c: Update throughout for bfd section macro changes.
242 2019-02-28 Joel Brobecker <brobecker@adacore.com>
244 * MAINTAINERS: Move Mike Frysinger to past maintainers' section.
246 2019-02-13 Simon Marchi <simon.marchi@ericsson.com>
248 * MAINTAINERS: Add Andrew Burgess as global maintainer.
250 2019-01-03 Pavel I. Kryukov <kryukov@frtk.ru>
252 * sim-base.h: Add 'extern C' if header is compiled with C++.
254 2018-12-06 Andrew Burgess <andrew.burgess@embecosm.com>
256 * common/acinclude.m4 (enable-cgen-maint): Support passing path to
258 * cris/configure: Regenerate.
259 * frv/configure: Regenerate.
260 * iq2000/configure: Regenerate.
261 * lm32/configure: Regenerate.
262 * m32r/configure: Regenerate.
263 * or1k/configure: Regenerate.
264 * sh64/configure: Regenerate.
266 2018-07-20 Maciej W. Rozycki <macro@mips.com>
268 * MAINTAINERS: Update my e-mail address, downgrade to MIPS I-IV
271 2018-07-19 DJ Delorie <dj@redhat.com>
273 * MAINTAINERS (rl78, m32c, rx, v850): Remove myself as maintainer.
275 2018-07-14 Stafford Horne <shorne@gmail.com>
277 * MAINTAINERS (or1k): Add myself as or1k maintainer.
279 2018-06-19 Simon Marchi <simon.marchi@ericsson.com>
281 * All configure.ac: Remove AC_PREREQ.
282 * All configure: Re-generate.
284 2018-01-22 Maciej W. Rozycki <macro@mips.com>
286 * MAINTAINERS: Update my company e-mail address.
288 2017-12-12 Stafford Horne <shorne@gmail.com>
289 Peter Gavin <pgavin@gmail.com>
291 * configure: Regenerated.
293 2017-12-12 Stafford Horne <shorne@gmail.com>
294 Peter Gavin <pgavin@gmail.com>
296 * configure.tgt: Add or1k sim.
298 2017-10-12 James Bowman <james.bowman@ftdichip.com>
300 * MAINTAINERS (ft32): Add myself.
302 2017-10-03 Jim Wilson <wilson@tuliptree.org>
304 * MAINTAINERS (aarch64): Update my email address.
306 2017-09-06 John Baldwin <jhb@FreeBSD.org>
308 * configure.ac: Honor existing CC_FOR_BUILD in environment.
309 * configure: Regenerate.
311 2017-02-14 Jim Wilson <jim.wilson@linaro.org>
313 * MAINTAINTERS (aarch64): Add myself.
315 2016-12-14 Maciej W. Rozycki <macro@imgtec.com>
317 * MAINTAINERS (Maintainers for particular sims): Add myself as
320 2016-02-03 Maciej W. Rozycki <macro@linux-mips.org>
322 * MAINTAINERS (Past sim maintainers): Add Thiemo Seufer.
324 2016-01-09 Mike Frysinger <vapier@gentoo.org>
326 * configure.ac: Delete sim_common check and the
327 AC_CONFIG_SUBDIRS(common) call.
328 * configure: Regenerate.
329 * configure.tgt (sim_common): Delete the variable.
331 2016-01-09 Mike Frysinger <vapier@gentoo.org>
333 * .gitignore: Delete /common/cconfig.h entry.
335 2016-01-05 Nick Clifton <nickc@redhat.com>
337 * MAINTAINERS: Add myself as AArch64 sim maintainer.
339 2015-12-09 Tristan Gingold <gingold@adacore.com>
341 * aarch64/simulator.c: Remove syscall.h include.
343 2015-12-26 Mike Frysinger <vapier@gentoo.org>
345 * README-HACKING: Delete mention of tconfig.h.
347 2015-11-24 Nick Clifton <nickc@redhat.com>
349 * configure.tgt: Add aarch64 entry.
350 * configure: Regenerate.
352 2015-06-23 Mike Frysinger <vapier@gentoo.org>
354 * configure.ac (AC_ARG_ENABLE(sim)): Call AS_HELP_STRING.
355 * configure: Regenerate.
357 2015-06-12 Mike Frysinger <vapier@gentoo.org>
359 * README-HACKING: Change configure.in to configure.ac.
361 2015-04-02 H.J. Lu <hongjiu.lu@intel.com>
363 * arm/configure: Regenerated.
364 * avr/configure: Likewise.
365 * bfin/configure: Likewise.
366 * common/configure: Likewise.
367 * cr16/configure: Likewise.
368 * cris/configure: Likewise.
369 * d10v/configure: Likewise.
370 * erc32/configure: Likewise.
371 * frv/configure: Likewise.
372 * ft32/configure: Likewise.
373 * h8300/configure: Likewise.
374 * igen/configure: Likewise.
375 * iq2000/configure: Likewise.
376 * lm32/configure: Likewise.
377 * m32c/configure: Likewise.
378 * m32r/configure: Likewise.
379 * m68hc11/configure: Likewise.
380 * mcore/configure: Likewise.
381 * microblaze/configure: Likewise.
382 * mips/configure: Likewise.
383 * mn10300/configure: Likewise.
384 * moxie/configure: Likewise.
385 * msp430/configure: Likewise.
386 * ppc/configure: Likewise.
387 * rl78/configure: Likewise.
388 * rx/configure: Likewise.
389 * sh/configure: Likewise.
390 * sh64/configure: Likewise.
391 * v850/configure: Likewise.
393 2015-04-01 H.J. Lu <hongjiu.lu@intel.com>
395 * common/Make-common.in (CSEARCH): Remove $(ZLIBINC).
396 (BFD_LIB): Remove $(ZLIB).
397 (CONFIG_LIBS): Add $(ZLIB).
398 * ppc/Makefile.in (ZLIBINC): Removed.
399 (INCLUDES): Remove $(ZLIBINC).
400 (BFD_LIB): Remove $(ZLIB).
402 2015-04-01 H.J. Lu <hongjiu.lu@intel.com>
404 * arm/configure: Regenerated.
405 * avr/configure: Likewise.
406 * bfin/configure: Likewise.
407 * common/configure: Likewise.
408 * cr16/configure: Likewise.
409 * cris/configure: Likewise.
410 * d10v/configure: Likewise.
411 * erc32/configure: Likewise.
412 * frv/configure: Likewise.
413 * ft32/configure: Likewise.
414 * h8300/configure: Likewise.
415 * igen/configure: Likewise.
416 * iq2000/configure: Likewise.
417 * lm32/configure: Likewise.
418 * m32c/configure: Likewise.
419 * m32r/configure: Likewise.
420 * m68hc11/configure: Likewise.
421 * mcore/configure: Likewise.
422 * microblaze/configure: Likewise.
423 * mips/configure: Likewise.
424 * mn10300/configure: Likewise.
425 * moxie/configure: Likewise.
426 * msp430/configure: Likewise.
427 * ppc/configure: Likewise.
428 * rl78/configure: Likewise.
429 * rx/configure: Likewise.
430 * sh/configure: Likewise.
431 * sh64/configure: Likewise.
432 * v850/configure: Likewise.
434 2015-03-29 Mike Frysinger <vapier@gentoo.org>
436 * configure: Regenerate.
437 * configure.ac: Delete sim_testsuite check and config in testsuite.
438 * configure.tgt (sim_testsuite): Delete everywhere.
440 2015-03-28 Mike Frysinger <vapier@gentoo.org>
442 * configure: Regenerate.
443 * configure.tgt (avr*-*-*): Set sim_testsuite=yes.
445 2015-03-28 James Bowman <james.bowman@ftdichip.com>
447 * configure.tgt: Add FT32 entry.
448 * configure: Regenerate.
450 2015-03-16 Mike Frysinger <vapier@gentoo.org>
452 * .gitignore: Delete tconfig.h.
453 * README-HACKING: Change tconfig.in to tconfig.h.
455 2014-03-12 Nick Clifton <nickc@redhat.com>
457 * MAINTAINERS: Add myself as the maintainer for the MSP430.
459 2014-03-10 Mike Frysinger <vapier@gentoo.org>
461 * configure.tgt (msp430*-*-*): Set sim_testsuite to yes.
462 * configure: Regenerate.
464 2014-01-06 Tom Tromey <tromey@redhat.com>
466 * common/cgen-trace.c: Don't use old VA_* macros.
467 * common/sim-load.c (xprintf): Likewise.
468 * common/sim-trace.c (trace_printf, debug_printf): Likewise.
470 2014-01-06 Tom Tromey <tromey@redhat.com>
472 * README-HACKING: Don't use PARAMS.
473 * arm/wrapper.c: Don't use PARAMS.
474 * bfin/sim-main.h: Don't use PARAMS.
475 * common/callback.c: Don't use PARAMS.
476 * common/cgen-trace.c: Don't use PARAMS.
477 * common/run-sim.h: Don't use PARAMS.
478 * common/run.c: Don't use PARAMS.
479 * common/sim-base.h: Don't use PARAMS.
480 * common/sim-load.c: Don't use PARAMS.
481 * common/sim-options.h: Don't use PARAMS.
482 * common/sim-trace.c: Don't use PARAMS.
483 * common/sim-trace.h: Don't use PARAMS.
484 * common/sim-utils.h: Don't use PARAMS.
485 * cr16/cr16_sim.h: Don't use PARAMS.
486 * cr16/gencode.c: Don't use PARAMS.
487 * cr16/interp.c: Don't use PARAMS.
488 * cr16/simops.c: Don't use PARAMS.
489 * d10v/d10v_sim.h: Don't use PARAMS.
490 * d10v/gencode.c: Don't use PARAMS.
491 * d10v/interp.c: Don't use PARAMS.
492 * d10v/simops.c: Don't use PARAMS.
493 * erc32/erc32.c: Don't use PARAMS.
494 * erc32/exec.c: Don't use PARAMS.
495 * erc32/float.c: Don't use PARAMS.
496 * erc32/func.c: Don't use PARAMS.
497 * erc32/sis.c: Don't use PARAMS.
498 * erc32/sis.h: Don't use PARAMS.
499 * mips/interp.c: Don't use PARAMS.
500 * mips/sim-main.h: Don't use PARAMS.
501 * sh/interp.c: Don't use PARAMS.
502 * v850/sim-main.h: Don't use PARAMS.
503 * v850/v850_sim.h: Don't use PARAMS.
505 2013-11-07 Will Newton <will.newton@linaro.org>
508 * arm/wrapper.c (sim_create_inferior): Call init before
511 2013-11-07 Will Newton <will.newton@linaro.org>
514 * arm/wrapper.c (sim_create_inferior): Avoid calling
515 bfd_get_mach with a NULL bfd.
517 2013-06-21 Nick Clifton <nickc@redhat.com>
519 * msp430: New Directory.
520 * configure.tgt: Add it.
521 * configure: Regenerate.
523 2013-03-15 Steve Ellcey <sellcey@mips.com>
525 * arm/wrapper.c (sim_complete_command): Make char arguments const.
526 * avr/interp.c (sim_complete_command): Ditto.
527 * common/sim-options.c (sim_complete_command): Ditto.
528 * cr16/interp.c (sim_complete_command): Ditto.
529 * erc32/interf.c (sim_complete_command): Ditto.
530 * m32c/gdb-if.c (sim_complete_command): Ditto.
531 * microblaze/interp.c (sim_complete_command): Ditto.
532 * ppc/sim_calls.c (sim_complete_command): Ditto.
533 * rl78/gdb-if.c (sim_complete_command): Ditto.
534 * rx/gdb-if.c (sim_complete_command): Ditto.
535 * sh/interp.c (sim_complete_command): Ditto.
537 2013-01-01 Joel Brobecker <brobecker@adacore.com>
539 Update year range in copyright notice of all files.
541 2012-12-19 Joel Brobecker <brobecker@adacore.com>
543 Update old contact info in GPL license notices.
545 2012-12-19 Joel Brobecker <brobecker@adacore.com>
547 Update the non-FSF-copyrighted files in sim to GPLv3 or later.
549 2012-11-20 Pavel Chupin <pavel.v.chupin@intel.com>
551 * common/Make-common.in: Use lt_cv_dlopen_libs under PLUGINS
553 * common/acinclude.m4: Define lt_cv_dlopen_libs.
554 * arm/configure: Regenerate.
555 * avr/configure: Regenerate.
556 * bfin/configure: Regenerate.
557 * common/configure: Regenerate.
558 * cr16/configure: Regenerate.
559 * cris/configure: Regenerate.
560 * d10v/configure: Regenerate.
561 * erc32/configure: Regenerate.
562 * frv/configure: Regenerate.
563 * h8300/configure: Regenerate.
564 * igen/configure: Regenerate.
565 * iq2000/configure: Regenerate.
566 * lm32/configure: Regenerate.
567 * m32c/configure: Regenerate.
568 * m32r/configure: Regenerate.
569 * m68hc11/configure: Regenerate.
570 * mcore/configure: Regenerate.
571 * microblaze/configure: Regenerate.
572 * mips/configure: Regenerate.
573 * mn10300/configure: Regenerate.
574 * moxie/configure: Regenerate.
575 * ppc/configure: Regenerate.
576 * rl78/configure: Regenerate.
577 * rx/configure: Regenerate.
578 * sh/configure: Regenerate.
579 * sh64/configure: Regenerate.
580 * testsuite/configure: Regenerate.
581 * v850/configure: Regenerate.
583 2012-11-05 Stephane Carrez <Stephane.Carrez@gmail.com>
585 * MAINTAINERS: Update my email address.
587 2012-09-24 Steve Ellcey <sellcey@mips.com>
589 * mips/basic.exp: Add mips*-mti-elf* target.
590 * configure.ac: Add mips*-mti-elf* target.
591 * configure: Regenerate.
593 2012-06-15 Joel Brobecker <brobecker@adacore.com>
595 * configure: Regenerate.
597 2012-06-06 Michael Eager <eager@eagercon.com>
599 * microblaze/interp.c (config.h): Add #include.
601 2011-11-29 Joel Brobecker <brobecker@adacore.com>
603 * MAINTAINERS (Global Maintainers): New section. Add Mike
606 2011-11-28 DJ Delorie <dj@redhat.com>
608 * configure.tgt: Add rl78 support.
609 * configure: Regenerate.
610 * rl78: New directory.
611 * MAINTAINERS: Add myself as RL78 maintainer.
613 2011-07-08 Hans-Peter Nilsson <hp@axis.com>
615 * MAINTAINERS: Remove Thiemo Seufer.
617 2011-06-04 Mike Frysinger <vapier@gentoo.org>
619 * configure.tgt (bfin-*-*): Add sim_testsuite=yes.
620 * configure: Regenerate.
622 2011-05-04 Joseph Myers <joseph@codesourcery.com>
624 * configure.tgt (thumb*-*-* | strongarm*-*-* | xscale-*-*): Don't
626 * configure: Regenerate.
628 2011-03-05 Mike Frysinger <vapier@gentoo.org>
630 * MAINTAINERS: Add bfin entry.
631 * configure.tgt (bfin-*-*): Handle bfin targets.
632 * configure: Regenerate.
634 2011-01-05 Mike Frysinger <vapier@gentoo.org>
636 * .gitignore: Add /*/hw-config.h.
638 2010-12-23 Mike Frysinger <vapier@gentoo.org>
640 * .gitignore: New file.
642 2010-07-28 DJ Delorie <dj@redhat.com>
644 * MAINTAINERS: Add self as RX maintainer. Sort list.
646 2010-06-08 Nick Clifton <nickc@redhat.com>
648 * reg.c (set_oszc): Use unsigned int for the mask.
649 (set_szc, set_osz, set_sz): Likewise.
651 2010-04-26 Mike Frysinger <vapier@gentoo.org>
653 * configure.ac: Target logic moved out to and included from ...
654 * configure.tgt: ... this new file.
655 * configure: Regenerated.
657 2010-04-12 Mike Frysinger <vapier@gentoo.org>
659 * README-HACKING: Add more sections.
661 2010-01-09 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
663 * avr/configure: Regenerate.
664 * cris/configure: Regenerate.
665 * microblaze/configure: Regenerate.
667 2009-11-24 Joel Brobecker <brobecker@adacore.com>
669 * common/aclocal.m4: Add include of ../../config/zlib.m4.
670 * common/common.m4: Use AM_ZLIB to check for zlib support.
671 * ppc/configure.ac: Likewise.
672 * arm/configure, avr/configure, common/configure, cr16/configure,
673 cris/configure, d10v/configure, erc32/configure, frv/configure,
674 h8300/configure, iq2000/configure, lm32/configure, m32c/configure,
675 m32r/configure, m68hc11/configure, mcore/configure,
676 microblaze/configure, mips/configure, mn10300/configure,
677 moxie/configure, ppc/configure, sh/configure, sh64/configure,
678 v850/configure: Regenerate.
680 2009-11-24 DJ Delorie <dj@redhat.com>
683 * configure.ac: Add entry for Renesas RX.
684 * configure: Regenerate.
686 2009-10-16 Doug Evans <dje@sebabeach.org>
688 * MAINTAINERS: Add myself as m32r maintainer.
690 2009-10-15 Michael Egaer <eager@eagercon.com>
692 * MAINTAINERS: Add self as MicroBlaze maintainer.
694 2009-10-14 Ben Elliston <bje@gnu.org>
696 * MAINTAINERS (common): Move myself to "past maintainers" section.
698 2009-10-06 Michael Eager <eager@eagercon.com>
700 * microblaze/interp.c: Add include microblaze-dis.h.
702 2009-09-23 Michael Eager <eager@eagercon.com>
704 * configure: Add microblaze-*.* (not regenerated).
705 * configure.ac: Likewise.
706 * microblaze/config.in: New.
707 * microblaze/configure: Generate.
708 * microblaze/configure.ac: New.
709 * microblaze/interp.c: New.
710 * microblaze/Makefile.in: New.
711 * microblaze/microblaze.h: New.
712 * microblaze/microblaze.isa: New.
713 * microblaze/sim-main.h: New.
714 * microblaze/sysdep.h: New.
716 2009-08-22 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
718 * avr/config.in: Regenerate.
719 * avr/configure: Likewise.
720 * configure: Likewise.
721 * cris/config.in: Likewise.
722 * cris/configure: Likewise.
724 * configure.ac: m4_include toplevel config/override.m4.
725 * configure: Regenerate.
726 * avr/configure: Regenerate.
727 * cris/configure: Regenerate.
729 2009-07-30 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
731 * Makefile.in (datarootdir): New variable.
733 2009-05-18 Jon Beniston <jon@beniston.com>
735 * MAINTAINERS: Add Jon Beniston as maintainer of lm32 sim.
736 * configure.ac: Add lm32 target.
737 * lm32: New directory.
739 2009-05-11 Andrew Cagney <cagney@gnu.org>
741 * MAINTAINERS: Orphan ppc.
743 2009-04-30 Anthony Green <green@moxielogic.com>
745 * MAINTAINERS: Add myself for the moxie port.
746 * moxie: New directory.
747 * configure.ac: Add entry for moxie.
748 * configure: Regenerate.
750 2009-04-27 Tristan Gingold <gingold@adacore.com>
752 * avr: New directory.
753 * configure.ac: Add avr.
754 * configure: Regenerated.
756 2009-04-17 Carlos O'Donell <carlos@codesourcery.com>
758 * Makefile.in: Add dummy install-pdf, html, and
759 install-html targets.
761 2008-07-29 Nick Clifton <nickc@redhat.com>
763 * common/genmloop.sh: Add new parameter: -shell to specify the
764 command interpreter to use to run the input file. This is
765 necessary because otherwise SHELL is taken from the user's
766 environment, and not from the makefile that invoked this script
767 and the user might not be running an sh-like shell.
768 * cris/Makefile.in: Pass -shell parameter to genmloop.sh.
769 * fr30/Makefile.in: Likewise.
770 * frv/Makefile.in: Likewise.
771 * i960/Makefile.in: Likewise.
772 * iq2000/Makefile.in: Likewise.
773 * m32r/Makefile.in: Likewise.
775 * frv/mloop.in: Add missing start of line comment marker.
777 2008-05-09 Olivier Hainque <hainque@adacore.com>
779 * ppc/altivec.igen (vperm): Latch inputs into temporaries.
781 2008-03-25 M R Swami Reddy <MR.Swami.Reddy@nsc.com>
783 * MAINTAINERS: Add myself as maintainer of cr16 port.
785 2008-02-12 M Ranga Swami Reddy <MR.Swami.Reddy@nsc.com>
787 Add simulator for National cr16 processor.
788 * cr16: New directory.
789 * configure.ac: Add entry for National cr16.
790 * configure: Regenerate.
792 2008-02-05 DJ Delorie <dj@redhat.com>
794 * configure.ac (v850): V850 now has a testsuite.
795 * configure (v850): Likewise.
797 2008-01-01 Daniel Jacobowitz <dan@codesourcery.com>
799 Updated copyright notices for most files.
801 2007-12-19 DJ Delorie <dj@redhat.com>
803 * frv/frv.c (frvbf_cut): Only look at the six LSBs of
806 2007-08-24 Joel Brobecker <brobecker@adacore.com>
808 Switch the license of all files explicitly copyright the FSF
811 2007-03-27 Brooks Moses <brooks.moses@codesourcery.com>
813 * Makefile.in: Add dummy "pdf" target.
815 2007-02-16 Thiemo Seufer <ths@mips.com>
817 * Makefile.in (FLAGS_TO_PASS, TARGET_FLAGS_TO_PASS): Add RUNTEST.
819 2007-01-28 Manuel Lauss <slauss@resi.at>
821 * configure.ac (sh64-*-*): Change to sh64*-*-*.
822 (sh-*-*): Change to sh*-*-*.
823 * configure: Regenerated.
825 2007-01-09 Daniel Jacobowitz <dan@codesourcery.com>
827 Updated copyright notices for most files.
829 2006-12-20 Hans-Peter Nilsson <hp@axis.com>
831 * Makefile.in (autoconf-common autoheader-common): Only run
832 autoheader on subdirs with a file config.in.
834 * configure.ac (common): Make the default "yes" for all targets
836 * configure: Regenerate.
838 * Makefile.in (autoconf-common autoheader-common): In documented
839 usage, say SHELL=/bin/sh.
840 (.PHONY): Add autoheader-common.
842 * MAINTAINERS: Add self as authorized committer for *.
844 2006-09-30 Daniel Jacobowitz <dan@codesourcery.com>
846 * MAINTAINERS: Add Dave Brolley for sh64.
848 2006-08-08 Joel Sherrill <joel.sherrill@oarcorp.com>
850 * configure.ac (sparc-*-rtems*|sparc-*-elf*): Enable erc32 simulator.
851 * Makefile.in (FLAGS_TO_PASS): Include libdir.
852 * configure: Regenerated.
854 2006-05-05 Andreas Schwab <schwab@suse.de>
856 * configure.ac (CFLAGS_FOR_BUILD): Set and substitute.
857 * configure: Regenerate.
859 * Makefile.in (CFLAGS_FOR_BUILD): Define.
860 (CC_FOR_BUILD): Don't override.
861 (FLAGS_TO_PASS): Pass CFLAGS_FOR_BUILD.
863 2006-05-04 Daniel Jacobowitz <dan@codesourcery.com>
865 * MAINTAINERS: Add an "Authorized committers" section, and list
868 2006-03-13 DJ Delorie <dj@redhat.com>
870 * MAINTAINERS: Add self as m32c sim maintainer.
872 2006-01-23 Jim Blandy <jimb@redhat.com>
874 Add simulator for Renesas M32C and M16C.
876 * m32c: New directory.
877 * configure.ac: Add entry for Renesas M32C.
878 * configure: Regenerate.
880 2005-05-26 Chris Demetriou <cgd@netbsd.org>
882 * MAINTAINERS: Update my mail address, move myself to the
883 "Past maintainers" section.
885 2005-05-17 Corinna Vinschen <vinschen@redhat.com>
887 * configure.ac: Add igen to v850 build.
888 * configure: Regenerate.
890 2005-04-29 Paul Brook <paul@codesourcery.com>
892 * common/callback.c (PIPE_BUF): Provide default definition.
893 (os_lstat): Use stat if lstat is not available on the host.
894 (os_ftruncate): Return EINVAL if not available on the host.
895 (os_truncate): Ditto.
896 * common/configure.ac: Check for lstat, truncate and ftruncate.
897 * common/configure: Regenerate.
898 * common/config.in: Regenerate.
900 2005-04-27 Paul Brook <paul@codesourcery.com>
902 * common/Make-common.in: Add $(EXEEXT) to "run".
904 2005-04-15 Corinna Vinschen <vinschen@redhat.com>
906 * configure.ac: Add explicit sh64 case.
907 * configure: Regenerate.
909 2005-03-30 Paul Brook <paul@codesourcery.com>
911 * arm/wrapper.c: Provide SIGTRAP and SIGBUS.
913 2005-02-28 Jim Blandy <jimb@redhat.com>
915 * d10v/configure.ac, igen/configure.ac, m68hc11/configure.ac,
916 mips/configure.ac, mn10300/configure.ac, v850/configure.ac:
917 Regenerated, after change to common/aclocal.m4.
919 2005-02-18 Corinna Vinschen <vinschen@redhat.com>
921 * iq2000: New target subdirectory.
922 * configure.ac: Add iq2000 target.
923 * configure: Regenerate.
925 2005-01-29 Hans-Peter Nilsson <hp@axis.com>
927 * Makefile.in (all, clean mostlyclean, distclean maintainer-clean)
928 (realclean, install): Fail if subdir make failed.
930 2005-01-28 Hans-Peter Nilsson <hp@axis.com>
932 * cris: New directory, simulator for Axis Communications CRIS
933 including CRIS v32, CGEN-based.
934 * configure.ac: Add corresponding configury.
935 * configure: Regenerate.
937 2005-01-17 Andrew Cagney <cagney@gnu.org>
939 * configure.ac: For mips*-*-* and mn10300*-*-* configure the
940 common directory. Remove sparc*-*-* from list.
942 2005-01-11 Andrew Cagney <cagney@gnu.org>
944 * Makefile.in (autoconf-common autoheader-common): Add --force to
945 autoconf and autoheader.
946 (autoconf-common autoheader-common)
947 (autoconf-install autoheader-install): Check for configure.ac, not
949 * configure.ac: Delete AC_CONFIG_AUX_DIR.
950 * configure: Re-generate.
952 2005-01-07 Andrew Cagney <cagney@gnu.org>
954 * configure.ac: Replace configure.in. Requires autoconf 2.59 and
955 correctly calls AC_CONFIG_SUBDIRS.
956 * configure: Re-generate.
958 2004-12-01 Andrew Cagney <cagney@gnu.org>
960 * i960, h8500: Delete directory.
962 2004-11-12 Andrew Cagney <cagney@gnu.org>
964 * d30v, fr30, mn10200, z8k: Delete directory.
966 2004-03-10 Ben Elliston <bje@gnu.org>
968 * MAINTAINERS: Update my mail address.
970 2004-01-26 Chris Demetriou <cgd@broadcom.com>
972 * configure.in (mips*-*-*): Configure in testsuite.
973 * configure: Regenerate.
975 2003-10-08 Dave Brolley <brolley@redhat.com>
977 * configure.in: Move frv handling to alphabetically correct placement.
979 2003-09-03 Andreas Schwab <schwab@suse.de>
981 * Makefile.in (FLAGS_TO_PASS): Pass down $(bindir) and $(mandir).
983 2003-08-29 Dave Brolley <brolley@redhat.com>
985 * MAINTAINERS: Add myself as maintainer of the FRV port.
987 2003-08-20 Michael Snyder <msnyder@redhat.com>
988 Dave Brolley <brolley@redhat.com>
990 * frv/: New directory, simulator for the Fujitsu FRV.
991 * configure.in: Add frv configury.
992 * configure: Regenerate.
994 2003-08-10 Ben Elliston <bje@wasabisystems.com>
996 * MAINTAINERS: Update my mail address.
998 2003-08-09 Andrew Cagney <cagney@redhat.com>
1000 * MAINTAINERS: Andrew Cagney (mips) and Geoff Keating (ppc) drop
1001 maintenance. List igen and sh maintainers. Mention that target
1002 and global maintainers pick up the slack.
1004 2003-07-09 Michael Snyder <msnyder@redhat.com>
1006 * configure.in: Add testsuite to extra_subdirs for sh.
1007 * configure: Regenerate.
1009 2003-01-23 Nick Clifton <nickc@redhat.com>
1013 2002-04-02 Alexandre Oliva <aoliva@redhat.com>
1015 * sh/gencode.c: Replace sh3e with sh2e except in fsqrt.
1017 2002-08-24 Geoffrey Keating <geoffk@redhat.com>
1019 * MAINTAINERS: Update my email address.
1021 2002-07-17 Andrew Cagney <ac131313@redhat.com>
1023 * w65/: Delete directory.
1025 2002-07-16 Andrew Cagney <ac131313@redhat.com>
1027 * configure.in (extra_subdirs): Mark fr30-*-* as obsolete.
1028 * configure: Re-generate.
1030 2002-07-13 Andrew Cagney <ac131313@redhat.com>
1032 * configure.in (extra_subdirs): Mark d30v-*-* as obsolete.
1033 * configure: Re-generate.
1035 2002-06-16 Andrew Cagney <ac131313@redhat.com>
1037 * Makefile.in (autoconf-changelog autoheader-changelog): Let name,
1038 id, date and host to be overriden by NAME, ID, DATE and HOST
1039 respectfully. Use ISO dates.
1041 Thu Jun 6 12:34:13 2002 Andrew Cagney <cagney@redhat.com>
1043 * Makefile.in (ChangeLog): New makefile variable.
1044 * README-HACKING: Mention the ChangeLog makefile variable.
1046 2002-06-01 Andrew Cagney <ac131313@redhat.com>
1048 * tic80/: Delete directory.
1050 2002-05-16 Stephane Carrez <stcarrez@nerim.fr>
1052 * MAINTAINERS: Update my email address.
1054 2002-03-06 Stephane Carrez <Stephane.Carrez@worldnet.fr>
1056 * MAINTAINERS: Record self as maintainer of m68hc11 simulator.
1058 2002-03-01 Frank Ch. Eigler <fche@redhat.com>
1060 * MAINTAINERS: Record self as a co-maintainer of just common/.
1062 2002-02-07 Nick Clifton <nickc@cambridge.redhat.com>
1064 * MAINTAINERS: Point to GDB files describing overall maintaince
1065 and check-in procedures.
1067 2002-01-10 Nick Clifton <nickc@cambridge.redhat.com>
1069 * MAINTAINERS: Add myself for ARM portions.
1071 2001-10-19 Andrew Cagney <ac131313@redhat.com>
1073 * configure.in: When Linux or NetBSD, enable PowerPC simulator.
1074 * configure: Re-generate.
1076 2001-02-16 Ben Elliston <bje@redhat.com>
1078 * MAINTAINERS: Add myself for common portions.
1080 2001-01-15 Chris Demetriou <cgd@broadcom.com>
1082 * MAINTAINERS: Added self and Andrew for the mips sim.
1084 2000-10-25 Geoff Keating <geoffk@cygnus.com>
1086 * MAINTAINERS: Added self and Andrew for the ppc sim.
1088 Thu Jul 27 21:26:26 2000 Andrew Cagney <cagney@b1.cygnus.com>
1090 From Stephane Carrez <Stephane.Carrez@worldnet.fr>:
1091 * m68hc11: New directory.
1092 * configure.in: Add.
1093 * configure: Regenerate.
1095 Tue Jul 4 13:43:54 2000 Andrew Cagney <cagney@b1.cygnus.com>
1097 * tic80: New directory.
1098 * configure.in: Add configury.
1099 * configure: Regenerate.
1101 2000-04-20 Nick Clifton <nickc@cygnus.com>
1103 * configure.in (extra_subdirs): Add testsuite to strongarm
1105 * configure: Regenerate.
1107 Sat Mar 4 16:48:54 2000 Andrew Cagney <cagney@b1.cygnus.com>
1109 * MAINTAINERS: New file. Blank.
1111 1999-11-18 Ben Elliston <bje@cygnus.com>
1113 * configure.in: Require autoconf 2.13 and remove obsolete
1114 invocation of AC_C_CROSS.
1115 * configure: Regenerate.
1117 1999-09-29 Doug Evans <devans@casey.cygnus.com>
1119 * configure.in: Configure the testsuite directory for thumb.
1120 * configure: Regenerate.
1122 1999-07-16 Ben Elliston <bje@cygnus.com>
1124 * configure.in: Configure the testsuite directory for arm.
1125 * configure: Regenerate.
1127 1999-04-08 Nick Clifton <nickc@cygnus.com>
1129 * configure.in: Add support for MCore target.
1130 * configure: Regenerate.
1132 1999-03-14 Stan Shebs <shebs@andros.cygnus.com>
1134 * Makefile.in (FLAGS_TO_PASS, TARGET_FLAGS_TO_PASS): Remove
1135 RUNTEST instead of commenting out, fixes portability problem.
1137 1999-02-08 Nick Clifton <nickc@cygnus.com>
1139 * configure.in: Add support for StrongARM target.
1140 * configure: Regenerate.
1142 1999-01-04 Jason Molenda (jsm@bugshack.cygnus.com)
1144 * configure.in: Require autoconf 2.12.1 or higher.
1146 1998-12-08 James E Wilson <wilson@wilson-pc.cygnus.com>
1148 * configure.in (i960-*-*): Add.
1149 * configure: Rebuild.
1151 Wed Nov 4 19:11:43 1998 Dave Brolley <brolley@cygnus.com>
1153 * configure.in: Added case for fr30-*-*.
1154 * configure: Regenerated.
1156 Fri Sep 25 10:12:19 1998 Christopher Faylor <cgf@cygnus.com>
1158 * ppc/Makefile.in: Add EXEEXT to installed powerpc-eabi-run program
1159 to allow successful operation on Windows.
1161 Thu May 28 14:59:46 1998 Jillian Ye <jillian@cygnus.com>
1163 * Makefile.in: Take RUNTEST out of FLAGS_TO_PASS so that make
1164 check can be invoked recursively.
1166 Wed Apr 29 12:38:53 1998 Mark Alexander <marka@cygnus.com>
1168 * configure.in: Build simulator on sparclite and sparc86x targets.
1169 * configure: Regenerate.
1171 Sun Apr 26 15:21:01 1998 Tom Tromey <tromey@cygnus.com>
1173 * Makefile.in (autoconf-common autoheader-common): Don't pass -l
1174 to autoconf and autoheader.
1176 Fri Apr 24 11:14:13 1998 Tom Tromey <tromey@cygnus.com>
1178 * Makefile.in (autoconf-common autoheader-common): Pass `-l
1179 ../common' to autoconf and autoheader. Unconditionally run
1180 autoconf in every subdir.
1181 (autoconf-changelog autoheader-changelog): Unconditionally run
1182 commands in every subdir.
1183 (autoconf-install autoheader-install): Likewise.
1185 Tue Mar 24 17:12:43 1998 Stu Grossman <grossman@bhuna.cygnus.co.uk>
1187 * Makefile.in: Get SHELL from configure.
1188 * (FLAGS_TO_PASS): Pass down SHELL.
1189 * configure: Regenerate with autoconf 2.12.1 to fix shell issues for
1192 Tue Mar 24 11::18:00 1998 Joyce Janczyn <janczyn@cygnus.com>
1194 * configure.in (extra_subdirs): Enable igen for mn10300.
1195 * configure: Re-generate.
1197 Tue Dec 2 10:10:42 1997 Nick Clifton <nickc@cygnus.com>
1199 * configure.in (extra_subdirs): Add support for thumb target.
1201 * configure (extra_subdirs): Add support for thumb target.
1203 Wed Oct 8 12:38:48 1997 Andrew Cagney <cagney@b1.cygnus.com>
1205 * configure.in (extra_subdirs): Add IGEN directory when MIPS
1207 * configure: Regenerate.
1209 Fri Sep 12 13:10:31 1997 Andrew Cagney <cagney@b1.cygnus.com>
1211 * configure.in (extra_subdirs): v850ea needs igen.
1212 * configure: Re-generate.
1214 Mon Sep 1 16:48:23 1997 Andrew Cagney <cagney@b1.cygnus.com>
1216 * configure.in (testdir): When a testsuite directory, add that to
1217 the list of confdirs.
1219 Tue Aug 19 11:17:46 1997 Andrew Cagney <cagney@b1.cygnus.com>
1221 * configure.in (extra_subdirs): Enable igen ready for V850.
1223 Tue Aug 26 15:14:48 1997 Andrew Cagney <cagney@b1.cygnus.com>
1225 * configure.in (w65-*-*, only_if_enabled): Set.
1226 * configure: Re-generate.
1228 Mon Aug 25 16:26:53 1997 Andrew Cagney <cagney@b1.cygnus.com>
1230 * configure.in (sparc*-*-*, only_if_enabled): Set
1231 only_if_enabled=yes. Check only_if_enabled before enabling a
1233 * configure: Regenerate.
1235 Mon Aug 18 10:56:59 1997 Nick Clifton <nickc@cygnus.com>
1237 * configure.in (extra_subdirs): Add v850e target.
1239 Mon Aug 18 10:56:59 1997 Nick Clifton <nickc@cygnus.com>
1241 * configure.in (extra_subdirs): Add v850ea target.
1243 Fri Jul 25 11:40:47 1997 Doug Evans <dje@canuck.cygnus.com>
1245 * configure.in (sparc*-*-*): Don't build erc32.
1246 * configure: Regenerate.
1248 Thu Apr 24 00:47:20 1997 Doug Evans <dje@canuck.cygnus.com>
1250 * configure.in (m32r-*-*): New target.
1251 * configure: Regenerate.
1253 * Makefile.in (autoconf-common, autoconf-changelog): Change $* to $@.
1255 Mon Apr 21 22:57:55 1997 Andrew Cagney <cagney@b1.cygnus.com>
1257 * Makefile.in (.NOEXPORT, MAKEOVERRIDES): Moved to end, BSD make
1258 thought that .NOEXPORT was the default target.
1260 Fri Apr 11 17:18:07 1997 Ian Lance Taylor <ian@cygnus.com>
1262 * Makefile.in (clean mostlyclean): Restore targets accidentally
1263 deleted in earlier change.
1265 Thu Apr 3 12:20:32 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
1267 * Makefile.in (autoheader-common, autoheader-changelog,
1268 autoheader-install): Perform autoheader in addition to autoconf.
1270 Wed Apr 2 15:09:05 1997 Doug Evans <dje@canuck.cygnus.com>
1272 * Makefile.in (autoconf-install): New target.
1273 (autoconf-changelog): Try different way to obtain user name.
1275 Wed Apr 2 14:25:52 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
1277 * Makefile.in (autoconf-changelog): New target, update
1278 ChangeLog for all subdirectories - normally used after
1279 autoconf-common target.
1281 Wed Mar 19 14:26:21 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
1283 * configure.in (extra_subdirs): Include testsuite for d30v.
1284 * configure: Regenerate.
1286 * Makefile.in (RUNTEST, RUNTESTFLAGS): Borrow test rules from
1288 (check): New rules - drive the testsuite.
1290 Mon Mar 3 13:01:00 1997 Jeffrey A Law (law@cygnus.com)
1292 * configure.in: Add mn10200 configure lines accidentally
1294 * configure: Regenerated.
1296 Wed Feb 19 10:34:20 1997 Andrew Cagney <cagney@critters.cygnus.com>
1298 * configure.in (extra_subdirs): Generalize common sub directory
1300 (extra_subdirs): For d30v add igen to the list to be built.
1302 Sun Feb 16 16:37:47 1997 Andrew Cagney <cagney@critters.cygnus.com>
1304 * configure.in (d30v): New target.
1305 * configure: Regenerated.
1307 Wed Feb 19 23:17:13 1997 Jeffrey A Law (law@cygnus.com)
1309 * configure.in: Don't require GCC to build the mn10200
1311 * configure: Rebuilt.
1313 Wed Feb 5 13:28:13 1997 Doug Evans <dje@canuck.cygnus.com>
1315 * configure.in: Don't configure any subdirs if no simulator
1316 is being built. Don't use erc32 for sparc64.
1317 * configure: Regenerated.
1319 Tue Feb 4 13:19:39 1997 Doug Evans <dje@canuck.cygnus.com>
1321 * Makefile.in (autoconf-common): New target.
1322 * configure.in: Do configure common.
1323 * configure: Regenerated.
1325 Thu Jan 23 13:59:52 1997 Stu Grossman (grossman@critters.cygnus.com)
1327 * configure configure.in: Don't configure common anymore. Files
1328 from common are now built in the individual simualtor directories.
1329 This fixes problems with the WinGDB build procedure.
1331 Mon Jan 13 13:16:42 1997 Jeffrey A Law (law@cygnus.com)
1333 * configure: Enable the mn10200 simulator.
1335 Wed Nov 20 01:00:36 1996 Doug Evans <dje@canuck.cygnus.com>
1337 * configure.in (configdirs): Add common.
1338 * configure: Regenerated.
1340 Fri Nov 1 08:03:30 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1342 * configure.in (powerpc*-*-linux*): Treat like the other powerpc
1343 system V based targets.
1344 * configure: Regenerate.
1346 Thu Oct 17 12:50:08 1996 Doug Evans <dje@canuck.cygnus.com>
1348 * configure.in (--enable-sim-powerpc): Delete.
1349 (--enable-sim): Add.
1350 * configure: Regenerated.
1352 Fri Oct 11 21:13:43 1996 Jeffrey A Law (law@cygnus.com)
1354 * configure.in: Only build the V850 simulator if
1356 * configure: Rebuild.
1358 Sun Sep 8 17:22:50 1996 Ian Lance Taylor <ian@cygnus.com>
1360 * configure.in: Do build erc32 for DOS and Windows hosts.
1361 * configure: Rebuild.
1363 Wed Sep 4 18:11:27 1996 Stu Grossman (grossman@critters.cygnus.com)
1365 * Makefile.in erc32/Makefile.in: Don't set srcroot. This should
1366 be inherited from the parent. Remove INSTALL_XFORM and
1367 INSTALL_XFORM1. Make INSTALL be set from configure.
1369 Wed Sep 4 15:49:16 1996 Ian Lance Taylor <ian@cygnus.com>
1371 * configure.in: Only build the MIPS simulator if we are using
1373 * configure: Rebuild.
1375 Wed Aug 28 19:05:23 1996 Jeffrey A Law (law@cygnus.com)
1377 * configure.in (v850-*-*): Added V850 simulator.
1379 Thu Aug 1 17:08:41 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1381 * configure.in (d10v-*-*): Added D10V simulator.
1383 Wed Jun 26 12:33:57 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
1385 * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir,
1386 INSTALL_PROGRAM, INSTALL_DATA): Use autoconf-set values.
1388 * configure.in (AC_PREREQ): autoconf 2.5 or higher.
1389 (AC_PROG_INSTALL): Added.
1390 * configure: Rebuilt.
1392 Mon Jun 24 14:18:26 1996 Ian Lance Taylor <ian@cygnus.com>
1394 * configure.in: Only configure erc32 if using gcc.
1395 * configure: Rebuild.
1397 Tue Jun 4 09:24:21 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1399 * configure.in (sim_target): Build PowerPC simulator for powerpc
1400 System V.4, Solaris, and Elf targets.
1401 * configure: Regenerate with autoconf 2.10.
1403 Wed May 22 12:10:49 1996 Rob Savoye <rob@chinadoll>
1405 * configure.in: Only built erc32 simulator on Unix hosts as it
1407 * configure: Regenerated with autoconf 2.8.
1409 Sun May 19 20:20:40 1996 Rob Savoye <rob@chinadoll.cygnus.com>
1411 * erc32: Sparc simulator from the ESA.
1413 Sun Apr 7 21:00:09 1996 Fred Fish <fnf@cygnus.com>
1415 From: Miles Bader <miles@gnu.ai.mit.edu>
1416 * configure.in: Use AC_CHECK_TOOL to find AR & RANLIB.
1417 * configure: Regenerate using autoconf.
1419 Thu Feb 22 11:31:50 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1421 * Makefile.in (install): Fix typo.
1423 Wed Feb 21 11:59:57 1996 Ian Lance Taylor <ian@cygnus.com>
1425 * configure: Regenerate with autoconf 2.7.
1427 * Makefile.in (all): Simplify.
1428 (clean, mostlyclean): SUBDIRS may contain whitespace; fix the loop
1429 as in the all target.
1430 (distclean, maintainer-clean, realclean): Likewise.
1431 (install): Likewise.
1433 Thu Feb 15 18:37:00 1996 Fred Fish <fnf@cygnus.com>
1435 * Makefile.in (all): Remove extra '\' char from shell script.
1437 Wed Feb 14 16:43:59 1996 Mike Meissner <meissner@tiktok.cygnus.com>
1439 * Makefile.in (all): Avoid a for loop with zero elements, even if
1440 the loop will not be executed because of an if statement.
1442 Wed Jan 31 21:48:34 1996 Fred Fish <fnf@cygnus.com>
1444 * Makefile.in (install): Add missing semicolon in "fi \".
1446 Thu Nov 9 16:10:56 1995 Michael Meissner <meissner@tiktok.cygnus.com>
1448 * Makefile.in (AR, CC, CFLAGS, CC_FOR_BUILD, RANLIB): Pick up
1449 defaults from configure.
1451 * configure.in: Pick up AR, CC, CFLAGS, CC_FOR_BUILD, RANLIB using
1453 (powerpc*-*-eabi*): Build simulator for all powerpc eabi targets
1454 if either --enable-sim-powerpc is used, or the host compiler is
1457 Wed Nov 8 15:46:49 1995 James G. Smith <jsmith@pasanda.cygnus.co.uk>
1459 * configure.in (mips*-*-*): Added "mips" simulator target.
1460 * configure: Re-generated.
1462 Tue Oct 10 11:08:20 1995 Fred Fish <fnf@cygnus.com>
1464 * Makefile.in (BISON): Remove macro.
1465 (FLAGS_TO_PASS): Remove BISON.
1467 Sun Oct 8 04:26:27 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1469 * configure.in: Explicitly `exit 0' for broken shells.
1470 * configure: Rebuilt.
1472 Fri Oct 6 12:03:27 1995 Jim Wilson <wilson@chestnut.cygnus.com>
1474 * common/run.c (main): Initialize the callbacks.
1476 Wed Sep 20 13:34:50 1995 Ian Lance Taylor <ian@cygnus.com>
1478 * Makefile.in (maintainer-clean): New synonym for realclean.
1480 Fri Aug 25 11:53:43 1995 Michael Meissner <meissner@tiktok.cygnus.com>
1482 * configure.in (powerpc*-*-eabisim*): Only build the simulator if
1483 the target is powerpc*-*-eabisim*, since it requires GCC to build.
1485 Mon Aug 21 17:53:48 1995 Michael Meissner <meissner@tiktok.cygnus.com>
1487 * configure.in (powerpc{,le}-*-*): Add psim from Andrew Cagney
1488 <cagney@highland.com.au>.
1489 * configure: Regnerate from configure.in.
1491 Thu Aug 3 10:45:37 1995 Fred Fish <fnf@cygnus.com>
1493 * Update all FSF addresses except those in COPYING* files.
1495 Thu Jul 20 15:17:29 1995 Fred Fish <fnf@cygnus.com>
1497 * Makefile.in (CC_FOR_BUILD): Define default and arrange to pass
1498 submakes either default or passed in value.
1500 Wed Jul 5 14:32:54 1995 J.T. Conklin <jtc@rtl.cygnus.com>
1502 * Makefile.in (all, clean, distclean, mostlyclean, realclean,
1503 install): Changed targets so that they descend all
1504 subdirectories in $(SUBDIRS).
1505 (*-all, *-clean, *-install): Removed targets.
1507 * configure.in: Don't bother with target makefile fragments, they
1508 are no longer needed.
1509 * configure: regenerated.
1511 * Makefile.in, configure.in: converted to autoconf.
1512 * configure: New file, generated with autconf 2.4.
1514 Wed May 24 14:48:46 1995 Steve Chamberlain <sac@slash.cygnus.com>
1516 * Makefile.in: Support ARM.
1517 * configure.in: Ditto.
1519 Sun Jan 15 16:53:47 1995 Steve Chamberlain <sac@splat>
1521 * Makefile.in: Support W65.
1522 * configure.in: Ditto.
1524 Sun Mar 13 09:27:50 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
1526 * Makefile.in: Add TAGS target.
1528 Mon Sep 13 12:47:15 1993 K. Richard Pixley (rich@sendai.cygnus.com)
1530 * Makefile.in (all-z8k, install-z8k, clean-z8k, all-h8300,
1531 install-h8300, clean-h8300, all-h8500, install-h8500,
1532 clean-h8500, all-sh, install-sh, clean-sh): do not echo
1535 Wed Jun 30 14:12:05 1993 david d `zoo' zuhn (zoo at poseidon.cygnus.com)
1537 * Makefile.in: remove endian.h trace from h8500
1539 Sun Jun 13 13:08:58 1993 Jim Kingdon (kingdon@cygnus.com)
1541 * Makefile.in: Add distclean, realclean, and mostlyclean targets.
1543 Fri May 21 11:21:16 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
1545 * Makefile.in: make all of the all-* target (except all-nothing)
1546 depend on endian.h, so that if we're not building a simulator, we
1549 Fri May 21 10:55:06 1993 Ian Lance Taylor (ian@cygnus.com)
1551 * Makefile.in (check, installcheck): Added dummy targets.
1553 Mon May 3 21:39:43 1993 Fred Fish (fnf@cygnus.com)
1555 * Makefile.in (endian): Find endian.c in $(srcdir), and also
1556 explicitly make it, since some makes apparently don't work with
1557 VPATH and .c to executable rules (SunOS make for example).
1559 Mon May 3 08:29:01 1993 Steve Chamberlain (sac@thepub.cygnus.com)
1561 * Makefile.in (endian): Add explicit rule for broken makes.
1563 Mon Mar 15 15:47:53 1993 Ian Lance Taylor (ian@cygnus.com)
1565 * Makefile.in (info, install-info): New targets.
1566 (DO_INSTALL): Renamed from INSTALL, which is overridden by the top
1569 Wed Feb 10 20:12:27 1993 K. Richard Pixley (rich@ok.cygnus.com)
1571 * Makefile.in (endian.h): build endian.h via a temporary file so
1572 that we don't leave an incomplete file lying around on
1574 (clean): remove endian, e.h, and endian.h.
1576 Mon Feb 8 11:46:06 1993 Steve Chamberlain (sac@thepub.cygnus.com)
1578 * Makefile.in, configure.in: if target isn't supported, build a