sim/ChangeLog

   1 2021-05-04  Tom Tromey  <tromey@adacore.com>
   2
   3         * Makefile.in: Rebuild.
   4         * Makefile.am (AM_CPPFLAGS): New variable.
   5
   6 2021-05-04  Mike Frysinger  <vapier@gentoo.org>
   7
   8         * m4/sim_ac_toolchain.m4 (SIM_AC_TOOLCHAIN): Define AR_FOR_BUILD and
   9         RANLIB_FOR_BUILD.
  10         * configure, Makefile.in: Regenerate.
  11
  12 2021-05-01  Mike Frysinger  <vapier@gentoo.org>
  13
  14         * m4/sim_ac_common.m4 (AC_CHECK_FUNCS_ONCE): Add strsignal.
  15
  16 2021-04-26  Mike Frysinger  <vapier@gentoo.org>
  17
  18         * README-HACKING (nltvals.def): Update to gennltvals.py.
  19
  20 2021-04-26  Mike Frysinger  <vapier@gentoo.org>
  21
  22         * m4/sim_ac_output.m4 (SIM_AC_OUTPUT): Require SIM_AC_OPTION_HARDWARE.
  23
  24 2021-04-23  Mike Frysinger  <vapier@gentoo.org>
  25
  26         * README-HACKING (SIM_AC_OPTION_HARDWARE): Delete first two args.
  27         * m4/sim_ac_option_hardware.m4 (SIM_AC_OPTION_HARDWARE): Replace [$1]
  28         with yes.  Delete test [$2].  Change [$3] to [$1].  Update comments.
  29
  30 2021-04-22  Tom Tromey  <tom@tromey.com>
  31
  32         * m4/sim_ac_common.m4 (SIM_AC_COMMON): Don't check for sys/time.h
  33         or sys/times.h.
  34
  35 2021-04-22  Tom Tromey  <tom@tromey.com>
  36
  37         * m4/sim_ac_common.m4 (SIM_AC_COMMON): Don't check for make.
  38
  39 2021-04-21  Simon Marchi  <simon.marchi@polymtl.ca>
  40
  41         * m4/sim_ac_option_warnings.m4 (SIM_AC_OPTION_WARNINGS): Use
  42         -Werror when probing for supported warning flags.
  43
  44 2021-04-18  Mike Frysinger  <vapier@gentoo.org>
  45
  46         * m4/sim_ac_common.m4: Change AC_CHECK_HEADERS to
  47         AC_CHECK_HEADERS_ONCE, merge calls, and sort args.
  48
  49 2021-04-18  Mike Frysinger  <vapier@gentoo.org>
  50
  51         * m4/sim_ac_common.m4: Change AC_CHECK_FUNCS to AC_CHECK_FUNCS_ONCE,
  52         merge calls, and sort args.
  53
  54 2021-04-03  Mike Frysinger  <vapier@gentoo.org>
  55
  56         * configure.ac: Add --example-sims option.
  57         * configure: Regenerate.
  58
  59 2021-04-03  Mike Frysinger  <vapier@gentoo.org>
  60
  61         * Makefile.am (check_PROGRAMS, CLEANFILES, DISTCLEANFILES): Define.
  62         * Makefile.in: Regenerated.
  63
  64 2021-04-03  Mike Frysinger  <vapier@gentoo.org>
  65
  66         * Makefile.am (SIM_PRIMARY_TARGET, AM_MAKEFLAGS): Define.
  67         * configure.ac: Add --enable-targets option.  Define SIM_PRIMARY_TARGET
  68         and SIM_TARGET.  Rewrite case statement with SIM_TARGET calls.
  69         * Makefile.in, configure: Regenerate.
  70
  71 2021-04-02  Mike Frysinger  <vapier@gentoo.org>
  72
  73         * Makefile.am [SIM_ENABLE_IGEN]: Include igen/local.mk.
  74         * configure.ac: Delete AC_CONFIG_SUBDIRS(igen) call.
  75         (SIM_ENABLE_IGEN): Define.
  76         * configure, Makefile.in: Regenerate.
  77
  78 2021-04-02  Mike Frysinger  <vapier@gentoo.org>
  79
  80         * Makefile.am (ACLOCAL_AMFLAGS): Add -Im4.
  81         (COMPILE_FOR_BUILD, LINK_FOR_BUILD): Define.
  82         * configure.ac: Replace toolchain calls with SIM_AC_TOOLCHAIN.
  83         * m4/sim_ac_common.m4 (SIM_AC_COMMON): Replace toolchain calls
  84         with SIM_AC_TOOLCHAIN.
  85         * m4/sim_ac_toolchain.m4: New file.
  86         * aclocal.m4, configure, Makefile.in: Regenerate.
  87
  88 2021-03-08  Tom Tromey  <tromey@adacore.com>
  89
  90         * aclocal.m4, configure, Makefile.in: Rebuild.
  91         * configure.ac: Use AM_MAINTAINER_MODE.
  92
  93 2021-03-07  Mike Frysinger  <vapier@gentoo.org>
  94
  95         * configure.ac (AC_CONFIG_FILES): Delete testsuite/Makefile.
  96         * Makefile.am: Include testsuite/local.mk.
  97         (AUTOMAKE_OPTIONS): Add dejagnu.
  98         * configure, Makefile.in: Regenerated.
  99
 100 2021-03-07  Mike Frysinger  <vapier@gentoo.org>
 101
 102         * Makefile.am: New file.
 103         * configure.ac: Update AC_INIT call.  Move AC_CANONICAL_SYSTEM after
 104         it.  Call AM_INIT_AUTOMAKE.  Delete AC_CONFIG_MACRO_DIRS.
 105         * aclocal.m4, configure, Makefile.in: Regenerated.
 106
 107 2021-02-28  Mike Frysinger  <vapier@gentoo.org>
 108
 109         * m4/sim_ac_common.m4 (SIM_AC_COMMON): Delete CC_FOR_BUILD test.
 110         Change CC_FOR_BUILD assignment.  Define CFLAGS_FOR_BUILD.
 111
 112 2021-02-28  Mike Frysinger  <vapier@gentoo.org>
 113
 114         * m4/sim_ac_common.m4 (SIM_AC_COMMON): Replace AR assignment and
 115         AC_SUBST(AR) with call to AC_CHECK_TOOL(AR, ar).
 116
 117 2021-02-28  Mike Frysinger  <vapier@gentoo.org>
 118
 119         * m4/sim_ac_common.m4 (SIM_AC_COMMON): Require AC_PROG_CPP.
 120
 121 2021-02-28  Mike Frysinger  <vapier@gentoo.org>
 122
 123         * README-HACKING: Delete SIM_EXTRA_LIBDEPS.
 124
 125 2021-02-27  Mike Frysinger  <vapier@gentoo.org>
 126
 127         * README-HACKING: Delete SIM_EXTRA_ALL.
 128
 129 2021-02-21  Mike Frysinger  <vapier@gentoo.org>
 130
 131         * m4/sim_ac_common.m4, m4/sim_ac_option_alignment.m4,
 132         m4/sim_ac_option_assert.m4, m4/sim_ac_option_bitsize.m4,
 133         m4/sim_ac_option_cgen_maint.m4, m4/sim_ac_option_default_model.m4,
 134         m4/sim_ac_option_endian.m4, m4/sim_ac_option_environment.m4,
 135         m4/sim_ac_option_float.m4, m4/sim_ac_option_hardware.m4,
 136         m4/sim_ac_option_inline.m4, m4/sim_ac_option_reserved_bits.m4,
 137         m4/sim_ac_option_scache.m4, m4/sim_ac_option_smp.m4,
 138         m4/sim_ac_option_warnings.m4, m4/sim_ac_option_xor_endian.m4,
 139         m4/sim_ac_output.m4: New files.
 140
 141 2021-02-20  Mike Frysinger  <vapier@gentoo.org>
 142
 143         * configure.tgt: Move arch list ...
 144         * configure.ac: ... here.
 145         * configure: Regenerate.
 146
 147 2021-02-19  Nelson Chu  <nelson.chu@sifive.com>
 148
 149         PR 27158
 150         * riscv/sim-main.c (execute_i): Updated encoding macros.
 151
 152 2021-02-13  Mike Frysinger  <vapier@gentoo.org>
 153
 154         * configure.tgt: Delete call to AC_SUBST(sim_arch).
 155         * configure: Regenerate.
 156
 157 2021-02-13  Mike Frysinger  <vapier@gentoo.org>
 158
 159         * README-HACKING: Replace sinclude with AC_CONFIG_MACRO_DIRS in
 160         configure.ac skeleton.
 161
 162 2021-02-06  Mike Frysinger  <vapier@gentoo.org>
 163
 164         * README-HACKING: Replace STATE_WATCHPOINTS with CPU_PC_FETCH.
 165
 166 2021-02-06  Mike Frysinger  <vapier@gentoo.org>
 167
 168         * configure.ac (HDEFINES): Delete AC_SUBST call.
 169         * configure: Regenerate.
 170
 171 2021-02-04  Mike Frysinger  <vapier@gentoo.org>
 172
 173         * configure.tgt (sim_arch): Add entry for riscv*-*-*.
 174         * configure: Regenerate.
 175
 176 2021-01-30  Mike Frysinger  <vapier@gentoo.org>
 177
 178         * Makefile.in (nltvals): Change to gennltvals.py.
 179
 180 2021-01-30  Mike Frysinger  <vapier@gentoo.org>
 181
 182         * README-HACKING: Delete reference to sizeof_pc.
 183
 184 2021-01-29  Mike Frysinger  <vapier@gentoo.org>
 185
 186         * MAINTAINERS (Global Maintainers): Move myself back.
 187
 188 2021-01-18  Mike Frysinger  <vapier@gentoo.org>
 189
 190         * configure.ac: Call AC_PROG_CPP.
 191         * configure: Regenerate.
 192         * Makefile.in (abs_srcdir, srcroot, CPP): Define.
 193         (nltvals): New target.
 194         * README-HACKING: Change headers to nltvals.
 195
 196 2021-01-18  Mike Frysinger  <vapier@gentoo.org>
 197
 198         * Makefile.in (headers): Change args to gennltvals.sh.
 199         * gennltvals.sh: Rewrite from scratch.
 200         * gentvals.sh: Delete.
 201         * nltvals.def: Regen.
 202
 203 2021-01-15  Mike Frysinger  <vapier@gentoo.org>
 204
 205         * configure.ac: Delete AC_CONFIG_SUBDIRS(testsuite) call.
 206         Add AC_CONFIG_FILES([Makefile testsuite/Makefile]) call.
 207         Drop argument to AC_OUTPUT.
 208         * configure: Regenerate.
 209
 210 2021-01-12  Mike Frysinger  <vapier@gentoo.org>
 211
 212         * README-HACKING (SIM_RUN_OBJS): Delete.
 213
 214 2021-01-09  Mike Frysinger  <vapier@gentoo.org>
 215
 216         * MAINTAINERS (sh64): Move to past maintainers.
 217         * configure: Regenerate.
 218         * configure.tgt (sh64*-*-*): Delete.
 219         * sh64/: Delete.
 220
 221 2021-01-09  Mike Frysinger  <vapier@gentoo.org>
 222
 223         * README-HACKING (AC_PREREQ): Delete.
 224
 225 2021-01-08  Mike Frysinger  <vapier@gentoo.org>
 226
 227         * README-HACKING (C Language Assumptions): Require C11 compiler.
 228
 229 2020-09-03  Jose E. Marchesi  <jose.marchesi@oracle.com>
 230
 231         * configure.ac: Do not configure sim/testsuite nor sim/igen if the
 232         primary target doesn't have a simulator.
 233         * configure: Regenerate.
 234
 235 2020-08-04  Jose E. Marchesi  <jose.marchesi@oracle.com>
 236             David Faust <david.faust@oracle.com>
 237
 238         * configure.tgt (sim_arch): Add entry for bpf-*-*.
 239         * configure: Regenerate.
 240         * MAINTAINERS: Add maintainer for the BPF simulator.
 241
 242 2019-12-19  Tom Tromey  <tromey@adacore.com>
 243
 244         PR build/24572:
 245         * Makefile.in (install-strip): New target.
 246
 247 2019-09-23  Dimitar Dimitrov  <dimitar@dinux.eu>
 248
 249         * MAINTAINERS: Add myself as PRU maintainer.
 250         * configure: Regenerated.
 251         * configure.tgt: Add PRU.
 252
 253 2019-09-18  Alan Modra  <amodra@gmail.com>
 254
 255         * common/sim-load.c, * common/sim-utils.c, * cris/sim-if.c,
 256         * erc32/func.c, * lm32/sim-if.c, * m32c/load.c, * m32c/trace.c,
 257         * m68hc11/interp.c, * ppc/hw_htab.c, * ppc/hw_init.c,
 258         * rl78/load.c, * rl78/trace.c, * rx/gdb-if.c, * rx/load.c,
 259         * rx/trace.c: Update throughout for bfd section macro changes.
 260
 261 2019-02-28  Joel Brobecker  <brobecker@adacore.com>
 262
 263         * MAINTAINERS: Move Mike Frysinger to past maintainers' section.
 264
 265 2019-02-13  Simon Marchi  <simon.marchi@ericsson.com>
 266
 267         * MAINTAINERS: Add Andrew Burgess as global maintainer.
 268
 269 2019-01-03  Pavel I. Kryukov  <kryukov@frtk.ru>
 270
 271         * sim-base.h: Add 'extern C' if header is compiled with C++.
 272
 273 2018-12-06  Andrew Burgess  <andrew.burgess@embecosm.com>
 274
 275         * common/acinclude.m4 (enable-cgen-maint): Support passing path to
 276         cgen source tree.
 277         * cris/configure: Regenerate.
 278         * frv/configure: Regenerate.
 279         * iq2000/configure: Regenerate.
 280         * lm32/configure: Regenerate.
 281         * m32r/configure: Regenerate.
 282         * or1k/configure: Regenerate.
 283         * sh64/configure: Regenerate.
 284
 285 2018-07-20  Maciej W. Rozycki  <macro@mips.com>
 286
 287         * MAINTAINERS: Update my e-mail address, downgrade to MIPS I-IV
 288         ISA maintenance.
 289
 290 2018-07-19  DJ Delorie  <dj@redhat.com>
 291
 292         * MAINTAINERS (rl78, m32c, rx, v850): Remove myself as maintainer.
 293
 294 2018-07-14  Stafford Horne  <shorne@gmail.com>
 295
 296         * MAINTAINERS (or1k): Add myself as or1k maintainer.
 297
 298 2018-06-19  Simon Marchi  <simon.marchi@ericsson.com>
 299
 300         * All configure.ac: Remove AC_PREREQ.
 301         * All configure: Re-generate.
 302
 303 2018-01-22  Maciej W. Rozycki  <macro@mips.com>
 304
 305         * MAINTAINERS: Update my company e-mail address.
 306
 307 2017-12-12  Stafford Horne  <shorne@gmail.com>
 308             Peter Gavin  <pgavin@gmail.com>
 309
 310         * configure: Regenerated.
 311
 312 2017-12-12  Stafford Horne  <shorne@gmail.com>
 313             Peter Gavin  <pgavin@gmail.com>
 314
 315         * configure.tgt: Add or1k sim.
 316
 317 2017-10-12  James Bowman  <james.bowman@ftdichip.com>
 318
 319         * MAINTAINERS (ft32): Add myself.
 320
 321 2017-10-03  Jim Wilson  <wilson@tuliptree.org>
 322
 323         * MAINTAINERS (aarch64): Update my email address.
 324
 325 2017-09-06  John Baldwin  <jhb@FreeBSD.org>
 326
 327         * configure.ac: Honor existing CC_FOR_BUILD in environment.
 328         * configure: Regenerate.
 329
 330 2017-02-14  Jim Wilson  <jim.wilson@linaro.org>
 331
 332         * MAINTAINTERS (aarch64): Add myself.
 333
 334 2016-12-14  Maciej W. Rozycki  <macro@imgtec.com>
 335
 336         * MAINTAINERS (Maintainers for particular sims): Add myself as
 337         a MIPS maintainer.
 338
 339 2016-02-03  Maciej W. Rozycki  <macro@linux-mips.org>
 340
 341         * MAINTAINERS (Past sim maintainers): Add Thiemo Seufer.
 342
 343 2016-01-09  Mike Frysinger  <vapier@gentoo.org>
 344
 345         * configure.ac: Delete sim_common check and the
 346         AC_CONFIG_SUBDIRS(common) call.
 347         * configure: Regenerate.
 348         * configure.tgt (sim_common): Delete the variable.
 349
 350 2016-01-09  Mike Frysinger  <vapier@gentoo.org>
 351
 352         * .gitignore: Delete /common/cconfig.h entry.
 353
 354 2016-01-05  Nick Clifton  <nickc@redhat.com>
 355
 356         * MAINTAINERS: Add myself as AArch64 sim maintainer.
 357
 358 2015-12-09  Tristan Gingold  <gingold@adacore.com>
 359
 360         * aarch64/simulator.c: Remove syscall.h include.
 361
 362 2015-12-26  Mike Frysinger  <vapier@gentoo.org>
 363
 364         * README-HACKING: Delete mention of tconfig.h.
 365
 366 2015-11-24  Nick Clifton  <nickc@redhat.com>
 367
 368         * configure.tgt: Add aarch64 entry.
 369         * configure: Regenerate.
 370
 371 2015-06-23  Mike Frysinger  <vapier@gentoo.org>
 372
 373         * configure.ac (AC_ARG_ENABLE(sim)): Call AS_HELP_STRING.
 374         * configure: Regenerate.
 375
 376 2015-06-12  Mike Frysinger  <vapier@gentoo.org>
 377
 378         * README-HACKING: Change configure.in to configure.ac.
 379
 380 2015-04-02  H.J. Lu  <hongjiu.lu@intel.com>
 381
 382         * arm/configure: Regenerated.
 383         * avr/configure: Likewise.
 384         * bfin/configure: Likewise.
 385         * common/configure: Likewise.
 386         * cr16/configure: Likewise.
 387         * cris/configure: Likewise.
 388         * d10v/configure: Likewise.
 389         * erc32/configure: Likewise.
 390         * frv/configure: Likewise.
 391         * ft32/configure: Likewise.
 392         * h8300/configure: Likewise.
 393         * igen/configure: Likewise.
 394         * iq2000/configure: Likewise.
 395         * lm32/configure: Likewise.
 396         * m32c/configure: Likewise.
 397         * m32r/configure: Likewise.
 398         * m68hc11/configure: Likewise.
 399         * mcore/configure: Likewise.
 400         * microblaze/configure: Likewise.
 401         * mips/configure: Likewise.
 402         * mn10300/configure: Likewise.
 403         * moxie/configure: Likewise.
 404         * msp430/configure: Likewise.
 405         * ppc/configure: Likewise.
 406         * rl78/configure: Likewise.
 407         * rx/configure: Likewise.
 408         * sh/configure: Likewise.
 409         * sh64/configure: Likewise.
 410         * v850/configure: Likewise.
 411
 412 2015-04-01  H.J. Lu  <hongjiu.lu@intel.com>
 413
 414         * common/Make-common.in (CSEARCH): Remove $(ZLIBINC).
 415         (BFD_LIB): Remove $(ZLIB).
 416         (CONFIG_LIBS): Add $(ZLIB).
 417         * ppc/Makefile.in (ZLIBINC): Removed.
 418         (INCLUDES): Remove $(ZLIBINC).
 419         (BFD_LIB): Remove $(ZLIB).
 420
 421 2015-04-01  H.J. Lu  <hongjiu.lu@intel.com>
 422
 423         * arm/configure: Regenerated.
 424         * avr/configure: Likewise.
 425         * bfin/configure: Likewise.
 426         * common/configure: Likewise.
 427         * cr16/configure: Likewise.
 428         * cris/configure: Likewise.
 429         * d10v/configure: Likewise.
 430         * erc32/configure: Likewise.
 431         * frv/configure: Likewise.
 432         * ft32/configure: Likewise.
 433         * h8300/configure: Likewise.
 434         * igen/configure: Likewise.
 435         * iq2000/configure: Likewise.
 436         * lm32/configure: Likewise.
 437         * m32c/configure: Likewise.
 438         * m32r/configure: Likewise.
 439         * m68hc11/configure: Likewise.
 440         * mcore/configure: Likewise.
 441         * microblaze/configure: Likewise.
 442         * mips/configure: Likewise.
 443         * mn10300/configure: Likewise.
 444         * moxie/configure: Likewise.
 445         * msp430/configure: Likewise.
 446         * ppc/configure: Likewise.
 447         * rl78/configure: Likewise.
 448         * rx/configure: Likewise.
 449         * sh/configure: Likewise.
 450         * sh64/configure: Likewise.
 451         * v850/configure: Likewise.
 452
 453 2015-03-29  Mike Frysinger  <vapier@gentoo.org>
 454
 455         * configure: Regenerate.
 456         * configure.ac: Delete sim_testsuite check and config in testsuite.
 457         * configure.tgt (sim_testsuite): Delete everywhere.
 458
 459 2015-03-28  Mike Frysinger  <vapier@gentoo.org>
 460
 461         * configure: Regenerate.
 462         * configure.tgt (avr*-*-*): Set sim_testsuite=yes.
 463
 464 2015-03-28  James Bowman  <james.bowman@ftdichip.com>
 465
 466         * configure.tgt: Add FT32 entry.
 467         * configure: Regenerate.
 468
 469 2015-03-16  Mike Frysinger  <vapier@gentoo.org>
 470
 471         * .gitignore: Delete tconfig.h.
 472         * README-HACKING: Change tconfig.in to tconfig.h.
 473
 474 2014-03-12  Nick Clifton  <nickc@redhat.com>
 475
 476         * MAINTAINERS: Add myself as the maintainer for the MSP430.
 477
 478 2014-03-10  Mike Frysinger  <vapier@gentoo.org>
 479
 480         * configure.tgt (msp430*-*-*): Set sim_testsuite to yes.
 481         * configure: Regenerate.
 482
 483 2014-01-06  Tom Tromey  <tromey@redhat.com>
 484
 485         * common/cgen-trace.c: Don't use old VA_* macros.
 486         * common/sim-load.c (xprintf): Likewise.
 487         * common/sim-trace.c (trace_printf, debug_printf): Likewise.
 488
 489 2014-01-06  Tom Tromey  <tromey@redhat.com>
 490
 491         * README-HACKING: Don't use PARAMS.
 492         * arm/wrapper.c: Don't use PARAMS.
 493         * bfin/sim-main.h: Don't use PARAMS.
 494         * common/callback.c: Don't use PARAMS.
 495         * common/cgen-trace.c: Don't use PARAMS.
 496         * common/run-sim.h: Don't use PARAMS.
 497         * common/run.c: Don't use PARAMS.
 498         * common/sim-base.h: Don't use PARAMS.
 499         * common/sim-load.c: Don't use PARAMS.
 500         * common/sim-options.h: Don't use PARAMS.
 501         * common/sim-trace.c: Don't use PARAMS.
 502         * common/sim-trace.h: Don't use PARAMS.
 503         * common/sim-utils.h: Don't use PARAMS.
 504         * cr16/cr16_sim.h: Don't use PARAMS.
 505         * cr16/gencode.c: Don't use PARAMS.
 506         * cr16/interp.c: Don't use PARAMS.
 507         * cr16/simops.c: Don't use PARAMS.
 508         * d10v/d10v_sim.h: Don't use PARAMS.
 509         * d10v/gencode.c: Don't use PARAMS.
 510         * d10v/interp.c: Don't use PARAMS.
 511         * d10v/simops.c: Don't use PARAMS.
 512         * erc32/erc32.c: Don't use PARAMS.
 513         * erc32/exec.c: Don't use PARAMS.
 514         * erc32/float.c: Don't use PARAMS.
 515         * erc32/func.c: Don't use PARAMS.
 516         * erc32/sis.c: Don't use PARAMS.
 517         * erc32/sis.h: Don't use PARAMS.
 518         * mips/interp.c: Don't use PARAMS.
 519         * mips/sim-main.h: Don't use PARAMS.
 520         * sh/interp.c: Don't use PARAMS.
 521         * v850/sim-main.h: Don't use PARAMS.
 522         * v850/v850_sim.h: Don't use PARAMS.
 523
 524 2013-11-07  Will Newton  <will.newton@linaro.org>
 525
 526         PR gdb/15508
 527         * arm/wrapper.c (sim_create_inferior): Call init before
 528         accessing STATE.
 529
 530 2013-11-07  Will Newton  <will.newton@linaro.org>
 531
 532         PR gdb/8989
 533         * arm/wrapper.c (sim_create_inferior): Avoid calling
 534         bfd_get_mach with a NULL bfd.
 535
 536 2013-06-21  Nick Clifton  <nickc@redhat.com>
 537
 538         * msp430: New Directory.
 539         * configure.tgt: Add it.
 540         * configure: Regenerate.
 541
 542 2013-03-15  Steve Ellcey  <sellcey@mips.com>
 543
 544         * arm/wrapper.c (sim_complete_command): Make char arguments const.
 545         * avr/interp.c (sim_complete_command): Ditto.
 546         * common/sim-options.c (sim_complete_command): Ditto.
 547         * cr16/interp.c (sim_complete_command): Ditto.
 548         * erc32/interf.c (sim_complete_command): Ditto.
 549         * m32c/gdb-if.c (sim_complete_command): Ditto.
 550         * microblaze/interp.c (sim_complete_command): Ditto.
 551         * ppc/sim_calls.c (sim_complete_command): Ditto.
 552         * rl78/gdb-if.c (sim_complete_command): Ditto.
 553         * rx/gdb-if.c (sim_complete_command): Ditto.
 554         * sh/interp.c (sim_complete_command): Ditto.
 555
 556 2013-01-01  Joel Brobecker  <brobecker@adacore.com>
 557
 558         Update year range in copyright notice of all files.
 559
 560 2012-12-19  Joel Brobecker  <brobecker@adacore.com>
 561
 562         Update old contact info in GPL license notices.
 563
 564 2012-12-19  Joel Brobecker  <brobecker@adacore.com>
 565
 566         Update the non-FSF-copyrighted files in sim to GPLv3 or later.
 567
 568 2012-11-20  Pavel Chupin  <pavel.v.chupin@intel.com>
 569
 570         * common/Make-common.in: Use lt_cv_dlopen_libs under PLUGINS
 571         condition.
 572         * common/acinclude.m4: Define lt_cv_dlopen_libs.
 573         * arm/configure: Regenerate.
 574         * avr/configure: Regenerate.
 575         * bfin/configure: Regenerate.
 576         * common/configure: Regenerate.
 577         * cr16/configure: Regenerate.
 578         * cris/configure: Regenerate.
 579         * d10v/configure: Regenerate.
 580         * erc32/configure: Regenerate.
 581         * frv/configure: Regenerate.
 582         * h8300/configure: Regenerate.
 583         * igen/configure: Regenerate.
 584         * iq2000/configure: Regenerate.
 585         * lm32/configure: Regenerate.
 586         * m32c/configure: Regenerate.
 587         * m32r/configure: Regenerate.
 588         * m68hc11/configure: Regenerate.
 589         * mcore/configure: Regenerate.
 590         * microblaze/configure: Regenerate.
 591         * mips/configure: Regenerate.
 592         * mn10300/configure: Regenerate.
 593         * moxie/configure: Regenerate.
 594         * ppc/configure: Regenerate.
 595         * rl78/configure: Regenerate.
 596         * rx/configure: Regenerate.
 597         * sh/configure: Regenerate.
 598         * sh64/configure: Regenerate.
 599         * testsuite/configure: Regenerate.
 600         * v850/configure: Regenerate.
 601
 602 2012-11-05  Stephane Carrez  <Stephane.Carrez@gmail.com>
 603
 604         * MAINTAINERS: Update my email address.
 605
 606 2012-09-24  Steve Ellcey  <sellcey@mips.com>
 607
 608         * mips/basic.exp: Add mips*-mti-elf* target.
 609         * configure.ac: Add mips*-mti-elf* target.
 610         * configure: Regenerate.
 611
 612 2012-06-15  Joel Brobecker  <brobecker@adacore.com>
 613
 614         * configure: Regenerate.
 615
 616 2012-06-06  Michael Eager  <eager@eagercon.com>
 617
 618         * microblaze/interp.c (config.h): Add #include.
 619
 620 2011-11-29  Joel Brobecker  <brobecker@adacore.com>
 621
 622         * MAINTAINERS (Global Maintainers): New section.  Add Mike
 623         Frysinger.
 624
 625 2011-11-28  DJ Delorie  <dj@redhat.com>
 626
 627         * configure.tgt: Add rl78 support.
 628         * configure: Regenerate.
 629         * rl78: New directory.
 630         * MAINTAINERS: Add myself as RL78 maintainer.
 631
 632 2011-07-08  Hans-Peter Nilsson  <hp@axis.com>
 633
 634         * MAINTAINERS: Remove Thiemo Seufer.
 635
 636 2011-06-04  Mike Frysinger  <vapier@gentoo.org>
 637
 638         * configure.tgt (bfin-*-*): Add sim_testsuite=yes.
 639         * configure: Regenerate.
 640
 641 2011-05-04  Joseph Myers  <joseph@codesourcery.com>
 642
 643         * configure.tgt (thumb*-*-* | strongarm*-*-* | xscale-*-*): Don't
 644         handle targets.
 645         * configure: Regenerate.
 646
 647 2011-03-05  Mike Frysinger  <vapier@gentoo.org>
 648
 649         * MAINTAINERS: Add bfin entry.
 650         * configure.tgt (bfin-*-*): Handle bfin targets.
 651         * configure: Regenerate.
 652
 653 2011-01-05  Mike Frysinger  <vapier@gentoo.org>
 654
 655         * .gitignore: Add /*/hw-config.h.
 656
 657 2010-12-23  Mike Frysinger  <vapier@gentoo.org>
 658
 659         * .gitignore: New file.
 660
 661 2010-07-28  DJ Delorie  <dj@redhat.com>
 662
 663         * MAINTAINERS: Add self as RX maintainer.  Sort list.
 664
 665 2010-06-08  Nick Clifton  <nickc@redhat.com>
 666
 667         * reg.c (set_oszc): Use unsigned int for the mask.
 668         (set_szc, set_osz, set_sz): Likewise.
 669
 670 2010-04-26  Mike Frysinger  <vapier@gentoo.org>
 671
 672         * configure.ac: Target logic moved out to and included from ...
 673         * configure.tgt: ... this new file.
 674         * configure: Regenerated.
 675
 676 2010-04-12  Mike Frysinger  <vapier@gentoo.org>
 677
 678         * README-HACKING: Add more sections.
 679
 680 2010-01-09  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
 681
 682         * avr/configure: Regenerate.
 683         * cris/configure: Regenerate.
 684         * microblaze/configure: Regenerate.
 685
 686 2009-11-24  Joel Brobecker  <brobecker@adacore.com>
 687
 688         * common/aclocal.m4: Add include of ../../config/zlib.m4.
 689         * common/common.m4: Use AM_ZLIB to check for zlib support.
 690         * ppc/configure.ac: Likewise.
 691         * arm/configure, avr/configure, common/configure, cr16/configure,
 692         cris/configure, d10v/configure, erc32/configure, frv/configure,
 693         h8300/configure, iq2000/configure, lm32/configure, m32c/configure,
 694         m32r/configure, m68hc11/configure, mcore/configure,
 695         microblaze/configure, mips/configure, mn10300/configure,
 696         moxie/configure, ppc/configure, sh/configure, sh64/configure,
 697         v850/configure: Regenerate.
 698
 699 2009-11-24  DJ Delorie  <dj@redhat.com>
 700
 701         * rx: New directory.
 702         * configure.ac: Add entry for Renesas RX.
 703         * configure: Regenerate.
 704
 705 2009-10-16  Doug Evans  <dje@sebabeach.org>
 706
 707         * MAINTAINERS: Add myself as m32r maintainer.
 708
 709 2009-10-15  Michael Egaer  <eager@eagercon.com>
 710
 711         * MAINTAINERS: Add self as MicroBlaze maintainer.
 712
 713 2009-10-14  Ben Elliston  <bje@gnu.org>
 714
 715         * MAINTAINERS (common): Move myself to "past maintainers" section.
 716
 717 2009-10-06  Michael Eager  <eager@eagercon.com>
 718
 719         * microblaze/interp.c: Add include microblaze-dis.h.
 720
 721 2009-09-23  Michael Eager  <eager@eagercon.com>
 722
 723         * configure: Add microblaze-*.* (not regenerated).
 724         * configure.ac: Likewise.
 725         * microblaze/config.in: New.
 726         * microblaze/configure: Generate.
 727         * microblaze/configure.ac: New.
 728         * microblaze/interp.c: New.
 729         * microblaze/Makefile.in: New.
 730         * microblaze/microblaze.h: New.
 731         * microblaze/microblaze.isa: New.
 732         * microblaze/sim-main.h: New.
 733         * microblaze/sysdep.h: New.
 734
 735 2009-08-22  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
 736
 737         * avr/config.in: Regenerate.
 738         * avr/configure: Likewise.
 739         * configure: Likewise.
 740         * cris/config.in: Likewise.
 741         * cris/configure: Likewise.
 742
 743         * configure.ac: m4_include toplevel config/override.m4.
 744         * configure: Regenerate.
 745         * avr/configure: Regenerate.
 746         * cris/configure: Regenerate.
 747
 748 2009-07-30  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
 749
 750         * Makefile.in (datarootdir): New variable.
 751
 752 2009-05-18  Jon Beniston <jon@beniston.com>
 753
 754         * MAINTAINERS: Add Jon Beniston as maintainer of lm32 sim.
 755         * configure.ac: Add lm32 target.
 756         * lm32: New directory.
 757
 758 2009-05-11  Andrew Cagney  <cagney@gnu.org>
 759
 760         * MAINTAINERS: Orphan ppc.
 761
 762 2009-04-30  Anthony Green  <green@moxielogic.com>
 763
 764         * MAINTAINERS: Add myself for the moxie port.
 765         * moxie: New directory.
 766         * configure.ac: Add entry for moxie.
 767         * configure: Regenerate.
 768
 769 2009-04-27  Tristan Gingold  <gingold@adacore.com>
 770
 771         * avr: New directory.
 772         * configure.ac: Add avr.
 773         * configure: Regenerated.
 774
 775 2009-04-17  Carlos O'Donell  <carlos@codesourcery.com>
 776
 777         * Makefile.in: Add dummy install-pdf, html, and
 778         install-html targets.
 779
 780 2008-07-29  Nick Clifton  <nickc@redhat.com>
 781
 782         * common/genmloop.sh: Add new parameter: -shell to specify the
 783         command interpreter to use to run the input file.  This is
 784         necessary because otherwise SHELL is taken from the user's
 785         environment, and not from the makefile that invoked this script
 786         and the user might not be running an sh-like shell.
 787         * cris/Makefile.in: Pass -shell parameter to genmloop.sh.
 788         * fr30/Makefile.in: Likewise.
 789         * frv/Makefile.in: Likewise.
 790         * i960/Makefile.in: Likewise.
 791         * iq2000/Makefile.in: Likewise.
 792         * m32r/Makefile.in: Likewise.
 793
 794         * frv/mloop.in: Add missing start of line comment marker.
 795
 796 2008-05-09  Olivier Hainque  <hainque@adacore.com>
 797
 798         * ppc/altivec.igen (vperm): Latch inputs into temporaries.
 799
 800 2008-03-25  M R Swami Reddy <MR.Swami.Reddy@nsc.com>
 801
 802         * MAINTAINERS: Add myself as maintainer of cr16 port.
 803
 804 2008-02-12  M Ranga Swami Reddy <MR.Swami.Reddy@nsc.com>
 805
 806         Add simulator for National cr16 processor.
 807         * cr16: New directory.
 808         * configure.ac: Add entry for National cr16.
 809         * configure: Regenerate.
 810
 811 2008-02-05  DJ Delorie  <dj@redhat.com>
 812
 813         * configure.ac (v850): V850 now has a testsuite.
 814         * configure (v850): Likewise.
 815
 816 2008-01-01  Daniel Jacobowitz  <dan@codesourcery.com>
 817
 818         Updated copyright notices for most files.
 819
 820 2007-12-19  DJ Delorie  <dj@redhat.com>
 821
 822         * frv/frv.c (frvbf_cut): Only look at the six LSBs of
 823         cut_point.
 824
 825 2007-08-24  Joel Brobecker  <brobecker@adacore.com>
 826
 827         Switch the license of all files explicitly copyright the FSF
 828         to GPLv3.
 829
 830 2007-03-27  Brooks Moses  <brooks.moses@codesourcery.com>
 831
 832         * Makefile.in: Add dummy "pdf" target.
 833
 834 2007-02-16  Thiemo Seufer  <ths@mips.com>
 835
 836         * Makefile.in (FLAGS_TO_PASS, TARGET_FLAGS_TO_PASS): Add RUNTEST.
 837
 838 2007-01-28  Manuel Lauss  <slauss@resi.at>
 839
 840         * configure.ac (sh64-*-*): Change to sh64*-*-*.
 841         (sh-*-*): Change to sh*-*-*.
 842         * configure: Regenerated.
 843
 844 2007-01-09  Daniel Jacobowitz  <dan@codesourcery.com>
 845
 846         Updated copyright notices for most files.
 847
 848 2006-12-20  Hans-Peter Nilsson  <hp@axis.com>
 849
 850         * Makefile.in (autoconf-common autoheader-common): Only run
 851         autoheader on subdirs with a file config.in.
 852
 853         * configure.ac (common): Make the default "yes" for all targets
 854         with sim subdirs.
 855         * configure: Regenerate.
 856
 857         * Makefile.in (autoconf-common autoheader-common): In documented
 858         usage, say SHELL=/bin/sh.
 859         (.PHONY): Add autoheader-common.
 860
 861         * MAINTAINERS: Add self as authorized committer for *.
 862
 863 2006-09-30  Daniel Jacobowitz  <dan@codesourcery.com>
 864
 865         * MAINTAINERS: Add Dave Brolley for sh64.
 866
 867 2006-08-08  Joel Sherrill <joel.sherrill@oarcorp.com>
 868
 869         * configure.ac (sparc-*-rtems*|sparc-*-elf*): Enable erc32 simulator.
 870         * Makefile.in (FLAGS_TO_PASS): Include libdir.
 871         * configure: Regenerated.
 872
 873 2006-05-05  Andreas Schwab  <schwab@suse.de>
 874
 875         * configure.ac (CFLAGS_FOR_BUILD): Set and substitute.
 876         * configure: Regenerate.
 877
 878         * Makefile.in (CFLAGS_FOR_BUILD): Define.
 879         (CC_FOR_BUILD): Don't override.
 880         (FLAGS_TO_PASS): Pass CFLAGS_FOR_BUILD.
 881
 882 2006-05-04  Daniel Jacobowitz  <dan@codesourcery.com>
 883
 884         * MAINTAINERS: Add an "Authorized committers" section, and list
 885         DJ Delorie for v850.
 886
 887 2006-03-13  DJ Delorie  <dj@redhat.com>
 888
 889         * MAINTAINERS: Add self as m32c sim maintainer.
 890
 891 2006-01-23  Jim Blandy  <jimb@redhat.com>
 892
 893         Add simulator for Renesas M32C and M16C.
 894
 895         * m32c: New directory.
 896         * configure.ac: Add entry for Renesas M32C.
 897         * configure: Regenerate.
 898
 899 2005-05-26  Chris Demetriou  <cgd@netbsd.org>
 900
 901         * MAINTAINERS: Update my mail address, move myself to the
 902         "Past maintainers" section.
 903
 904 2005-05-17  Corinna Vinschen  <vinschen@redhat.com>
 905
 906         * configure.ac: Add igen to v850 build.
 907         * configure: Regenerate.
 908
 909 2005-04-29  Paul Brook  <paul@codesourcery.com>
 910
 911         * common/callback.c (PIPE_BUF): Provide default definition.
 912         (os_lstat): Use stat if lstat is not available on the host.
 913         (os_ftruncate): Return EINVAL if not available on the host.
 914         (os_truncate): Ditto.
 915         * common/configure.ac: Check for lstat, truncate and ftruncate.
 916         * common/configure: Regenerate.
 917         * common/config.in: Regenerate.
 918
 919 2005-04-27  Paul Brook  <paul@codesourcery.com>
 920
 921         * common/Make-common.in: Add $(EXEEXT) to "run".
 922
 923 2005-04-15  Corinna Vinschen  <vinschen@redhat.com>
 924
 925         * configure.ac: Add explicit sh64 case.
 926         * configure: Regenerate.
 927
 928 2005-03-30  Paul Brook  <paul@codesourcery.com>
 929
 930         * arm/wrapper.c: Provide SIGTRAP and SIGBUS.
 931
 932 2005-02-28  Jim Blandy  <jimb@redhat.com>
 933
 934         * d10v/configure.ac, igen/configure.ac, m68hc11/configure.ac,
 935         mips/configure.ac, mn10300/configure.ac, v850/configure.ac:
 936         Regenerated, after change to common/aclocal.m4.
 937
 938 2005-02-18  Corinna Vinschen  <vinschen@redhat.com>
 939
 940         * iq2000: New target subdirectory.
 941         * configure.ac: Add iq2000 target.
 942         * configure: Regenerate.
 943
 944 2005-01-29  Hans-Peter Nilsson  <hp@axis.com>
 945
 946         * Makefile.in (all, clean mostlyclean, distclean maintainer-clean)
 947         (realclean, install): Fail if subdir make failed.
 948
 949 2005-01-28  Hans-Peter Nilsson  <hp@axis.com>
 950
 951         * cris: New directory, simulator for Axis Communications CRIS
 952         including CRIS v32, CGEN-based.
 953         * configure.ac: Add corresponding configury.
 954         * configure: Regenerate.
 955
 956 2005-01-17  Andrew Cagney  <cagney@gnu.org>
 957
 958         * configure.ac: For mips*-*-* and mn10300*-*-* configure the
 959         common directory.  Remove sparc*-*-* from list.
 960
 961 2005-01-11  Andrew Cagney  <cagney@gnu.org>
 962
 963         * Makefile.in (autoconf-common autoheader-common): Add --force to
 964         autoconf and autoheader.
 965         (autoconf-common autoheader-common)
 966         (autoconf-install autoheader-install): Check for configure.ac, not
 967         configure.in.
 968         * configure.ac: Delete AC_CONFIG_AUX_DIR.
 969         * configure: Re-generate.
 970
 971 2005-01-07  Andrew Cagney  <cagney@gnu.org>
 972
 973         * configure.ac: Replace configure.in.  Requires autoconf 2.59 and
 974         correctly calls AC_CONFIG_SUBDIRS.
 975         * configure: Re-generate.
 976
 977 2004-12-01  Andrew Cagney  <cagney@gnu.org>
 978
 979         * i960, h8500: Delete directory.
 980
 981 2004-11-12  Andrew Cagney  <cagney@gnu.org>
 982
 983         * d30v, fr30, mn10200, z8k: Delete directory.
 984
 985 2004-03-10  Ben Elliston  <bje@gnu.org>
 986
 987         * MAINTAINERS: Update my mail address.
 988
 989 2004-01-26  Chris Demetriou  <cgd@broadcom.com>
 990
 991         * configure.in (mips*-*-*): Configure in testsuite.
 992         * configure: Regenerate.
 993
 994 2003-10-08  Dave Brolley  <brolley@redhat.com>
 995
 996         * configure.in: Move frv handling to alphabetically correct placement.
 997
 998 2003-09-03  Andreas Schwab  <schwab@suse.de>
 999
1000         * Makefile.in (FLAGS_TO_PASS): Pass down $(bindir) and $(mandir).
1001
1002 2003-08-29  Dave Brolley  <brolley@redhat.com>
1003
1004         * MAINTAINERS: Add myself as maintainer of the FRV port.
1005
1006 2003-08-20  Michael Snyder  <msnyder@redhat.com>
1007             Dave Brolley  <brolley@redhat.com>
1008
1009         * frv/: New directory, simulator for the Fujitsu FRV.
1010         * configure.in: Add frv configury.
1011         * configure: Regenerate.
1012
1013 2003-08-10  Ben Elliston  <bje@wasabisystems.com>
1014
1015         * MAINTAINERS: Update my mail address.
1016
1017 2003-08-09  Andrew Cagney  <cagney@redhat.com>
1018
1019         * MAINTAINERS: Andrew Cagney (mips) and Geoff Keating (ppc) drop
1020         maintenance.  List igen and sh maintainers.  Mention that target
1021         and global maintainers pick up the slack.
1022
1023 2003-07-09  Michael Snyder  <msnyder@redhat.com>
1024
1025         * configure.in: Add testsuite to extra_subdirs for sh.
1026         * configure: Regenerate.
1027
1028 2003-01-23  Nick Clifton  <nickc@redhat.com>
1029
1030         * Add sh2e support:
1031
1032 2002-04-02  Alexandre Oliva  <aoliva@redhat.com>
1033
1034         * sh/gencode.c: Replace sh3e with sh2e except in fsqrt.
1035
1036 2002-08-24  Geoffrey Keating  <geoffk@redhat.com>
1037
1038         * MAINTAINERS: Update my email address.
1039
1040 2002-07-17  Andrew Cagney  <ac131313@redhat.com>
1041
1042         * w65/: Delete directory.
1043
1044 2002-07-16  Andrew Cagney  <ac131313@redhat.com>
1045
1046         * configure.in (extra_subdirs): Mark fr30-*-* as obsolete.
1047         * configure: Re-generate.
1048
1049 2002-07-13  Andrew Cagney  <ac131313@redhat.com>
1050
1051         * configure.in (extra_subdirs): Mark d30v-*-* as obsolete.
1052         * configure: Re-generate.
1053
1054 2002-06-16  Andrew Cagney  <ac131313@redhat.com>
1055
1056         * Makefile.in (autoconf-changelog autoheader-changelog): Let name,
1057         id, date and host to be overriden by NAME, ID, DATE and HOST
1058         respectfully.  Use ISO dates.
1059
1060 Thu Jun  6 12:34:13 2002  Andrew Cagney  <cagney@redhat.com>
1061
1062         * Makefile.in (ChangeLog): New makefile variable.
1063         * README-HACKING: Mention the ChangeLog makefile variable.
1064
1065 2002-06-01  Andrew Cagney  <ac131313@redhat.com>
1066
1067         * tic80/: Delete directory.
1068
1069 2002-05-16  Stephane Carrez  <stcarrez@nerim.fr>
1070
1071         * MAINTAINERS: Update my email address.
1072
1073 2002-03-06  Stephane Carrez  <Stephane.Carrez@worldnet.fr>
1074
1075         * MAINTAINERS: Record self as maintainer of m68hc11 simulator.
1076
1077 2002-03-01  Frank Ch. Eigler  <fche@redhat.com>
1078
1079         * MAINTAINERS: Record self as a co-maintainer of just common/.
1080
1081 2002-02-07  Nick Clifton  <nickc@cambridge.redhat.com>
1082
1083         * MAINTAINERS: Point to GDB files describing overall maintaince
1084         and check-in procedures.
1085
1086 2002-01-10  Nick Clifton  <nickc@cambridge.redhat.com>
1087
1088         * MAINTAINERS: Add myself for ARM portions.
1089
1090 2001-10-19  Andrew Cagney  <ac131313@redhat.com>
1091
1092         * configure.in: When Linux or NetBSD, enable PowerPC simulator.
1093         * configure: Re-generate.
1094
1095 2001-02-16  Ben Elliston  <bje@redhat.com>
1096
1097         * MAINTAINERS: Add myself for common portions.
1098
1099 2001-01-15  Chris Demetriou  <cgd@broadcom.com>
1100
1101         * MAINTAINERS: Added self and Andrew for the mips sim.
1102
1103 2000-10-25  Geoff Keating  <geoffk@cygnus.com>
1104
1105         * MAINTAINERS: Added self and Andrew for the ppc sim.
1106
1107 Thu Jul 27 21:26:26 2000  Andrew Cagney  <cagney@b1.cygnus.com>
1108
1109         From Stephane Carrez <Stephane.Carrez@worldnet.fr>:
1110         * m68hc11: New directory.
1111         * configure.in: Add.
1112         * configure: Regenerate.
1113
1114 Tue Jul  4 13:43:54 2000  Andrew Cagney  <cagney@b1.cygnus.com>
1115
1116         * tic80: New directory.
1117         * configure.in: Add configury.
1118         * configure: Regenerate.
1119
1120 2000-04-20  Nick Clifton  <nickc@cygnus.com>
1121
1122         * configure.in (extra_subdirs): Add testsuite to strongarm
1123         directories.
1124         * configure: Regenerate.
1125
1126 Sat Mar  4 16:48:54 2000  Andrew Cagney  <cagney@b1.cygnus.com>
1127
1128         * MAINTAINERS: New file.  Blank.
1129
1130 1999-11-18  Ben Elliston  <bje@cygnus.com>
1131
1132         * configure.in: Require autoconf 2.13 and remove obsolete
1133         invocation of AC_C_CROSS.
1134         * configure: Regenerate.
1135
1136 1999-09-29  Doug Evans  <devans@casey.cygnus.com>
1137
1138         * configure.in: Configure the testsuite directory for thumb.
1139         * configure: Regenerate.
1140
1141 1999-07-16  Ben Elliston  <bje@cygnus.com>
1142
1143         * configure.in: Configure the testsuite directory for arm.
1144         * configure: Regenerate.
1145
1146 1999-04-08  Nick Clifton  <nickc@cygnus.com>
1147
1148         * configure.in: Add support for MCore target.
1149         * configure: Regenerate.
1150
1151 1999-03-14  Stan Shebs  <shebs@andros.cygnus.com>
1152
1153         * Makefile.in (FLAGS_TO_PASS, TARGET_FLAGS_TO_PASS): Remove
1154         RUNTEST instead of commenting out, fixes portability problem.
1155
1156 1999-02-08  Nick Clifton  <nickc@cygnus.com>
1157
1158         * configure.in: Add support for StrongARM target.
1159         * configure: Regenerate.
1160
1161 1999-01-04  Jason Molenda  (jsm@bugshack.cygnus.com)
1162
1163         * configure.in: Require autoconf 2.12.1 or higher.
1164
1165 1998-12-08  James E Wilson  <wilson@wilson-pc.cygnus.com>
1166
1167         * configure.in (i960-*-*): Add.
1168         * configure: Rebuild.
1169
1170 Wed Nov  4 19:11:43 1998  Dave Brolley  <brolley@cygnus.com>
1171
1172         * configure.in: Added case for fr30-*-*.
1173         * configure: Regenerated.
1174
1175 Fri Sep 25 10:12:19 1998  Christopher Faylor <cgf@cygnus.com>
1176
1177         * ppc/Makefile.in: Add EXEEXT to installed powerpc-eabi-run program
1178         to allow successful operation on Windows.
1179
1180 Thu May 28 14:59:46 1998 Jillian Ye <jillian@cygnus.com>
1181
1182         * Makefile.in: Take RUNTEST out of FLAGS_TO_PASS so that make
1183         check can be invoked recursively.
1184
1185 Wed Apr 29 12:38:53 1998  Mark Alexander  <marka@cygnus.com>
1186
1187         * configure.in: Build simulator on sparclite and sparc86x targets.
1188         * configure: Regenerate.
1189
1190 Sun Apr 26 15:21:01 1998  Tom Tromey  <tromey@cygnus.com>
1191
1192         * Makefile.in (autoconf-common autoheader-common): Don't pass -l
1193         to autoconf and autoheader.
1194
1195 Fri Apr 24 11:14:13 1998  Tom Tromey  <tromey@cygnus.com>
1196
1197         * Makefile.in (autoconf-common autoheader-common): Pass `-l
1198         ../common' to autoconf and autoheader.  Unconditionally run
1199         autoconf in every subdir.
1200         (autoconf-changelog autoheader-changelog): Unconditionally run
1201         commands in every subdir.
1202         (autoconf-install autoheader-install): Likewise.
1203
1204 Tue Mar 24 17:12:43 1998  Stu Grossman  <grossman@bhuna.cygnus.co.uk>
1205
1206         * Makefile.in:  Get SHELL from configure.
1207         * (FLAGS_TO_PASS):  Pass down SHELL.
1208         * configure:  Regenerate with autoconf 2.12.1 to fix shell issues for
1209         NT native builds.
1210
1211 Tue Mar 24 11::18:00 1998  Joyce Janczyn  <janczyn@cygnus.com>
1212
1213         * configure.in (extra_subdirs): Enable igen for mn10300.
1214         * configure: Re-generate.
1215
1216 Tue Dec  2 10:10:42 1997  Nick Clifton  <nickc@cygnus.com>
1217
1218         * configure.in (extra_subdirs): Add support for thumb target.
1219
1220         * configure (extra_subdirs): Add support for thumb target.
1221
1222 Wed Oct  8 12:38:48 1997  Andrew Cagney  <cagney@b1.cygnus.com>
1223
1224         * configure.in (extra_subdirs): Add IGEN directory when MIPS
1225         target.
1226         * configure: Regenerate.
1227
1228 Fri Sep 12 13:10:31 1997  Andrew Cagney  <cagney@b1.cygnus.com>
1229
1230         * configure.in (extra_subdirs): v850ea needs igen.
1231         * configure: Re-generate.
1232
1233 Mon Sep  1 16:48:23 1997  Andrew Cagney  <cagney@b1.cygnus.com>
1234
1235         * configure.in (testdir): When a testsuite directory, add that to
1236         the list of confdirs.
1237
1238 Tue Aug 19 11:17:46 1997  Andrew Cagney  <cagney@b1.cygnus.com>
1239
1240         * configure.in (extra_subdirs): Enable igen ready for V850.
1241
1242 Tue Aug 26 15:14:48 1997  Andrew Cagney  <cagney@b1.cygnus.com>
1243
1244         * configure.in (w65-*-*, only_if_enabled): Set.
1245         * configure: Re-generate.
1246
1247 Mon Aug 25 16:26:53 1997  Andrew Cagney  <cagney@b1.cygnus.com>
1248
1249         * configure.in (sparc*-*-*, only_if_enabled): Set
1250         only_if_enabled=yes.  Check only_if_enabled before enabling a
1251         simulator.
1252         * configure: Regenerate.
1253
1254 Mon Aug 18 10:56:59 1997  Nick Clifton  <nickc@cygnus.com>
1255
1256         * configure.in (extra_subdirs): Add v850e target.
1257
1258 Mon Aug 18 10:56:59 1997  Nick Clifton  <nickc@cygnus.com>
1259
1260         * configure.in (extra_subdirs): Add v850ea target.
1261
1262 Fri Jul 25 11:40:47 1997  Doug Evans  <dje@canuck.cygnus.com>
1263
1264         * configure.in (sparc*-*-*): Don't build erc32.
1265         * configure: Regenerate.
1266
1267 Thu Apr 24 00:47:20 1997  Doug Evans  <dje@canuck.cygnus.com>
1268
1269         * configure.in (m32r-*-*): New target.
1270         * configure: Regenerate.
1271
1272         * Makefile.in (autoconf-common, autoconf-changelog): Change $* to $@.
1273
1274 Mon Apr 21 22:57:55 1997  Andrew Cagney  <cagney@b1.cygnus.com>
1275
1276         * Makefile.in (.NOEXPORT, MAKEOVERRIDES): Moved to end, BSD make
1277         thought that .NOEXPORT was the default target.
1278
1279 Fri Apr 11 17:18:07 1997  Ian Lance Taylor  <ian@cygnus.com>
1280
1281         * Makefile.in (clean mostlyclean): Restore targets accidentally
1282         deleted in earlier change.
1283
1284 Thu Apr  3 12:20:32 1997  Andrew Cagney  <cagney@kremvax.cygnus.com>
1285
1286         * Makefile.in (autoheader-common, autoheader-changelog,
1287         autoheader-install): Perform autoheader in addition to autoconf.
1288
1289 Wed Apr  2 15:09:05 1997  Doug Evans  <dje@canuck.cygnus.com>
1290
1291         * Makefile.in (autoconf-install): New target.
1292         (autoconf-changelog): Try different way to obtain user name.
1293
1294 Wed Apr  2 14:25:52 1997  Andrew Cagney  <cagney@kremvax.cygnus.com>
1295
1296         * Makefile.in (autoconf-changelog): New target, update
1297         ChangeLog for all subdirectories - normally used after
1298         autoconf-common target.
1299
1300 Wed Mar 19 14:26:21 1997  Andrew Cagney  <cagney@kremvax.cygnus.com>
1301
1302         * configure.in (extra_subdirs): Include testsuite for d30v.
1303         * configure: Regenerate.
1304
1305         * Makefile.in (RUNTEST, RUNTESTFLAGS): Borrow test rules from
1306         ../gdb/Makefile.in
1307         (check): New rules - drive the testsuite.
1308
1309 Mon Mar  3 13:01:00 1997  Jeffrey A Law  (law@cygnus.com)
1310
1311         * configure.in: Add mn10200 configure lines accidentally
1312         removed.
1313         * configure: Regenerated.
1314
1315 Wed Feb 19 10:34:20 1997  Andrew Cagney  <cagney@critters.cygnus.com>
1316
1317         * configure.in (extra_subdirs): Generalize common sub directory
1318         into a list.
1319         (extra_subdirs): For d30v add igen to the list to be built.
1320
1321 Sun Feb 16 16:37:47 1997  Andrew Cagney  <cagney@critters.cygnus.com>
1322
1323         * configure.in (d30v): New target.
1324         * configure: Regenerated.
1325
1326 Wed Feb 19 23:17:13 1997  Jeffrey A Law  (law@cygnus.com)
1327
1328         * configure.in: Don't require GCC to build the mn10200
1329         simulator anymore.
1330         * configure: Rebuilt.
1331
1332 Wed Feb  5 13:28:13 1997  Doug Evans  <dje@canuck.cygnus.com>
1333
1334         * configure.in: Don't configure any subdirs if no simulator
1335         is being built.  Don't use erc32 for sparc64.
1336         * configure: Regenerated.
1337
1338 Tue Feb  4 13:19:39 1997  Doug Evans  <dje@canuck.cygnus.com>
1339
1340         * Makefile.in (autoconf-common): New target.
1341         * configure.in: Do configure common.
1342         * configure: Regenerated.
1343
1344 Thu Jan 23 13:59:52 1997  Stu Grossman  (grossman@critters.cygnus.com)
1345
1346         * configure configure.in:  Don't configure common anymore.  Files
1347         from common are now built in the individual simualtor directories.
1348         This fixes problems with the WinGDB build procedure.
1349
1350 Mon Jan 13 13:16:42 1997  Jeffrey A Law  (law@cygnus.com)
1351
1352         * configure: Enable the mn10200 simulator.
1353
1354 Wed Nov 20 01:00:36 1996  Doug Evans  <dje@canuck.cygnus.com>
1355
1356         * configure.in (configdirs): Add common.
1357         * configure: Regenerated.
1358
1359 Fri Nov  1 08:03:30 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
1360
1361         * configure.in (powerpc*-*-linux*): Treat like the other powerpc
1362         system V based targets.
1363         * configure: Regenerate.
1364
1365 Thu Oct 17 12:50:08 1996  Doug Evans  <dje@canuck.cygnus.com>
1366
1367         * configure.in (--enable-sim-powerpc): Delete.
1368         (--enable-sim): Add.
1369         * configure: Regenerated.
1370
1371 Fri Oct 11 21:13:43 1996  Jeffrey A Law  (law@cygnus.com)
1372
1373         * configure.in: Only build the V850 simulator if
1374         we are using gcc.
1375         * configure: Rebuild.
1376
1377 Sun Sep  8 17:22:50 1996  Ian Lance Taylor  <ian@cygnus.com>
1378
1379         * configure.in: Do build erc32 for DOS and Windows hosts.
1380         * configure: Rebuild.
1381
1382 Wed Sep  4 18:11:27 1996  Stu Grossman  (grossman@critters.cygnus.com)
1383
1384         * Makefile.in erc32/Makefile.in:  Don't set srcroot.  This should
1385         be inherited from the parent.  Remove INSTALL_XFORM and
1386         INSTALL_XFORM1.  Make INSTALL be set from configure.
1387
1388 Wed Sep  4 15:49:16 1996  Ian Lance Taylor  <ian@cygnus.com>
1389
1390         * configure.in: Only build the MIPS simulator if we are using
1391         gcc.
1392         * configure: Rebuild.
1393
1394 Wed Aug 28 19:05:23 1996  Jeffrey A Law  (law@cygnus.com)
1395
1396         * configure.in (v850-*-*): Added V850 simulator.
1397
1398 Thu Aug  1 17:08:41 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
1399
1400         * configure.in (d10v-*-*): Added D10V simulator.
1401
1402 Wed Jun 26 12:33:57 1996  Jason Molenda  (crash@godzilla.cygnus.co.jp)
1403
1404         * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir,
1405         INSTALL_PROGRAM, INSTALL_DATA): Use autoconf-set values.
1406         (docdir): Removed.
1407         * configure.in (AC_PREREQ): autoconf 2.5 or higher.
1408         (AC_PROG_INSTALL): Added.
1409         * configure: Rebuilt.
1410
1411 Mon Jun 24 14:18:26 1996  Ian Lance Taylor  <ian@cygnus.com>
1412
1413         * configure.in: Only configure erc32 if using gcc.
1414         * configure: Rebuild.
1415
1416 Tue Jun  4 09:24:21 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
1417
1418         * configure.in (sim_target): Build PowerPC simulator for powerpc
1419         System V.4, Solaris, and Elf targets.
1420         * configure: Regenerate with autoconf 2.10.
1421
1422 Wed May 22 12:10:49 1996  Rob Savoye  <rob@chinadoll>
1423
1424         * configure.in: Only built erc32 simulator on Unix hosts as it
1425         uses pseudo ttys.
1426         * configure: Regenerated with autoconf 2.8.
1427
1428 Sun May 19 20:20:40 1996  Rob Savoye  <rob@chinadoll.cygnus.com>
1429
1430         * erc32: Sparc simulator from the ESA.
1431
1432 Sun Apr  7 21:00:09 1996  Fred Fish  <fnf@cygnus.com>
1433
1434         From: Miles Bader  <miles@gnu.ai.mit.edu>
1435         * configure.in: Use AC_CHECK_TOOL to find AR & RANLIB.
1436         * configure: Regenerate using autoconf.
1437
1438 Thu Feb 22 11:31:50 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
1439
1440         * Makefile.in (install): Fix typo.
1441
1442 Wed Feb 21 11:59:57 1996  Ian Lance Taylor  <ian@cygnus.com>
1443
1444         * configure: Regenerate with autoconf 2.7.
1445
1446         * Makefile.in (all): Simplify.
1447         (clean, mostlyclean): SUBDIRS may contain whitespace; fix the loop
1448         as in the all target.
1449         (distclean, maintainer-clean, realclean): Likewise.
1450         (install): Likewise.
1451
1452 Thu Feb 15 18:37:00 1996  Fred Fish  <fnf@cygnus.com>
1453
1454         * Makefile.in (all): Remove extra '\' char from shell script.
1455
1456 Wed Feb 14 16:43:59 1996  Mike Meissner  <meissner@tiktok.cygnus.com>
1457
1458         * Makefile.in (all): Avoid a for loop with zero elements, even if
1459         the loop will not be executed because of an if statement.
1460
1461 Wed Jan 31 21:48:34 1996  Fred Fish  <fnf@cygnus.com>
1462
1463         * Makefile.in (install): Add missing semicolon in "fi \".
1464
1465 Thu Nov  9 16:10:56 1995  Michael Meissner  <meissner@tiktok.cygnus.com>
1466
1467         * Makefile.in (AR, CC, CFLAGS, CC_FOR_BUILD, RANLIB): Pick up
1468         defaults from configure.
1469
1470         * configure.in: Pick up AR, CC, CFLAGS, CC_FOR_BUILD, RANLIB using
1471         configure defaults.
1472         (powerpc*-*-eabi*): Build simulator for all powerpc eabi targets
1473         if either --enable-sim-powerpc is used, or the host compiler is
1474         GCC.
1475
1476 Wed Nov  8 15:46:49 1995  James G. Smith  <jsmith@pasanda.cygnus.co.uk>
1477
1478         * configure.in (mips*-*-*): Added "mips" simulator target.
1479         * configure: Re-generated.
1480
1481 Tue Oct 10 11:08:20 1995  Fred Fish  <fnf@cygnus.com>
1482
1483         * Makefile.in (BISON): Remove macro.
1484         (FLAGS_TO_PASS): Remove BISON.
1485
1486 Sun Oct  8 04:26:27 1995  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
1487
1488         * configure.in:  Explicitly `exit 0' for broken shells.
1489         * configure:  Rebuilt.
1490
1491 Fri Oct  6 12:03:27 1995  Jim Wilson  <wilson@chestnut.cygnus.com>
1492
1493         * common/run.c (main): Initialize the callbacks.
1494
1495 Wed Sep 20 13:34:50 1995  Ian Lance Taylor  <ian@cygnus.com>
1496
1497         * Makefile.in (maintainer-clean): New synonym for realclean.
1498
1499 Fri Aug 25 11:53:43 1995  Michael Meissner  <meissner@tiktok.cygnus.com>
1500
1501         * configure.in (powerpc*-*-eabisim*): Only build the simulator if
1502         the target is powerpc*-*-eabisim*, since it requires GCC to build.
1503
1504 Mon Aug 21 17:53:48 1995  Michael Meissner  <meissner@tiktok.cygnus.com>
1505
1506         * configure.in (powerpc{,le}-*-*): Add psim from Andrew Cagney
1507         <cagney@highland.com.au>.
1508         * configure: Regnerate from configure.in.
1509
1510 Thu Aug  3 10:45:37 1995  Fred Fish  <fnf@cygnus.com>
1511
1512         * Update all FSF addresses except those in COPYING* files.
1513
1514 Thu Jul 20 15:17:29 1995  Fred Fish  <fnf@cygnus.com>
1515
1516         * Makefile.in (CC_FOR_BUILD):  Define default and arrange to pass
1517         submakes either default or passed in value.
1518
1519 Wed Jul  5 14:32:54 1995  J.T. Conklin  <jtc@rtl.cygnus.com>
1520
1521         * Makefile.in (all, clean, distclean, mostlyclean, realclean,
1522           install): Changed targets so that they descend all
1523           subdirectories in $(SUBDIRS).
1524           (*-all, *-clean, *-install): Removed targets.
1525
1526         * configure.in: Don't bother with target makefile fragments, they
1527           are no longer needed.
1528         * configure: regenerated.
1529
1530         * Makefile.in, configure.in: converted to autoconf.
1531         * configure: New file, generated with autconf 2.4.
1532
1533 Wed May 24 14:48:46 1995  Steve Chamberlain  <sac@slash.cygnus.com>
1534
1535         * Makefile.in: Support ARM.
1536         * configure.in: Ditto.
1537
1538 Sun Jan 15 16:53:47 1995  Steve Chamberlain  <sac@splat>
1539
1540         * Makefile.in: Support W65.
1541         * configure.in: Ditto.
1542
1543 Sun Mar 13 09:27:50 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
1544
1545         * Makefile.in: Add TAGS target.
1546
1547 Mon Sep 13 12:47:15 1993  K. Richard Pixley  (rich@sendai.cygnus.com)
1548
1549         * Makefile.in (all-z8k, install-z8k, clean-z8k, all-h8300,
1550           install-h8300, clean-h8300, all-h8500, install-h8500,
1551           clean-h8500, all-sh, install-sh, clean-sh): do not echo
1552           recursion lines.
1553
1554 Wed Jun 30 14:12:05 1993  david d `zoo' zuhn  (zoo at poseidon.cygnus.com)
1555
1556         * Makefile.in: remove endian.h trace from h8500
1557
1558 Sun Jun 13 13:08:58 1993  Jim Kingdon  (kingdon@cygnus.com)
1559
1560         * Makefile.in: Add distclean, realclean, and mostlyclean targets.
1561
1562 Fri May 21 11:21:16 1993  david d `zoo' zuhn  (zoo at cirdan.cygnus.com)
1563
1564         * Makefile.in: make all of the all-* target (except all-nothing)
1565         depend on endian.h, so that if we're not building a simulator, we
1566         don't built endian
1567
1568 Fri May 21 10:55:06 1993  Ian Lance Taylor  (ian@cygnus.com)
1569
1570         * Makefile.in (check, installcheck): Added dummy targets.
1571
1572 Mon May  3 21:39:43 1993  Fred Fish  (fnf@cygnus.com)
1573
1574         * Makefile.in (endian): Find endian.c in $(srcdir), and also
1575         explicitly make it, since some makes apparently don't work with
1576         VPATH and .c to executable rules (SunOS make for example).
1577
1578 Mon May  3 08:29:01 1993  Steve Chamberlain  (sac@thepub.cygnus.com)
1579
1580         * Makefile.in (endian): Add explicit rule for broken makes.
1581
1582 Mon Mar 15 15:47:53 1993  Ian Lance Taylor  (ian@cygnus.com)
1583
1584         * Makefile.in (info, install-info): New targets.
1585         (DO_INSTALL): Renamed from INSTALL, which is overridden by the top
1586         level Makefile.
1587
1588 Wed Feb 10 20:12:27 1993  K. Richard Pixley  (rich@ok.cygnus.com)
1589
1590         * Makefile.in (endian.h): build endian.h via a temporary file so
1591           that we don't leave an incomplete file lying around on
1592           interrupted builds.
1593           (clean): remove endian, e.h, and endian.h.
1594
1595 Mon Feb  8 11:46:06 1993  Steve Chamberlain  (sac@thepub.cygnus.com)
1596
1597         * Makefile.in, configure.in: if target isn't supported, build a
1598         harmless makefile.