sim/bfin/ChangeLog

   1 2015-12-24  Mike Frysinger  <vapier@gentoo.org>
   2
   3         * tconfig.h (SIM_HANDLES_LMA): Delete.
   4
   5 2015-11-17  Mike Frysinger  <vapier@gentoo.org>
   6
   7         * tconfig.h (WITH_MODULO_MEMORY): Delete.
   8
   9 2015-11-15  Mike Frysinger  <vapier@gentoo.org>
  10
  11         * Makefile.in (SIM_OBJS): Delete sim-reason.o, sim-reg.o, and
  12         sim-stop.o.
  13
  14 2015-11-14  Mike Frysinger  <vapier@gentoo.org>
  15
  16         * interp.c (sim_close): Delete.
  17
  18 2015-10-11  Mike Frysinger  <vapier@gentoo.org>
  19
  20         PR sim/18407
  21         * bfin-sim.c (decode_dsp32shiftimm_0): Call ashiftrt when count
  22         is less than 0.
  23
  24 2015-06-24  Mike Frysinger  <vapier@gentoo.org>
  25
  26         * interp.c (trace_register): Delete.
  27         * sim-main.h (trace_register, TRACE_REGISTER, TRACE_REG): Delete.
  28
  29 2015-06-23  Mike Frysinger  <vapier@gentoo.org>
  30
  31         * configure: Regenerate.
  32
  33 2015-06-17  Mike Frysinger  <vapier@gentoo.org>
  34
  35         * interp.c: Include sim-syscall.h.
  36         (syscall_read_mem, syscall_write_mem): Delete.
  37         (bfin_syscall): Change syscall_read_mem/syscall_write_mem to
  38         sim_syscall_read_mem/sim_syscall_write_mem.
  39
  40 2015-06-17  Mike Frysinger  <vapier@gentoo.org>
  41
  42         * linux-targ-map.h: Update example comments.
  43         (cb_linux_syscall_map): Fill out name field.
  44         (cb_linux_errno_map, cb_linux_open_map, cb_linux_signal_map):
  45         Likewise.
  46
  47 2015-06-12  Mike Frysinger  <vapier@gentoo.org>
  48
  49         * interp.c: Expand comment on CB_SYS_xxx defines.
  50
  51 2015-06-12  Mike Frysinger  <vapier@gentoo.org>
  52
  53         * configure: Regenerate.
  54
  55 2015-06-12  Mike Frysinger  <vapier@gentoo.org>
  56
  57         * configure: Regenerate.
  58
  59 2015-06-12  Mike Frysinger  <vapier@gentoo.org>
  60
  61         * bfin-sim.c (hwloop_get_next_pc): Change TRACE_BRANCH to
  62         BFIN_TRACE_BRANCH.
  63         (decode_ProgCtrl_0, decode_BRCC_0, decode_UJUMP_0, decode_CALLa_0):
  64         Likewise.
  65         * bfin-sim.h (__PUT_MEM, __GET_MEM): Change TRACE_CORE to
  66         BFIN_TRACE_CORE.
  67         * dv-bfin_cec.c (_cec_raise, cec_latch, cec_return): Change
  68         TRACE_BRANCH to BFIN_TRACE_BRANCH.
  69         * interp.c (syscall_read_mem, syscall_write_mem): Change MAYBE_TRACE
  70         to TRACE_CORE.
  71         * sim-main.h (MAYBE_TRACE, TRACE_INSN, TRACE_DECODE, TRACE_EXTRACT,
  72         TRACE_SYSCALL, TRACE_EVENTS): Delete.
  73         (TRACE_CORE): Rename to ...
  74         (BFIN_TRACE_CORE): ... this.  Change MAYBE_TRACE to TRACE_CORE.
  75         (TRACE_BRANCH): Rename to ...
  76         (BFIN_TRACE_BRANCH): ... this.  Change MAYBE_TRACE to TRACE_BRANCH.
  77
  78 2015-04-24  David Binderman  <dcb314@hotmail.com>
  79             Nick Clifton  <nickc@redhat.com>
  80
  81         PR 18273
  82         * bfin-sim.c (decode_dsp32alu_0): Remove spurious check for
  83         s == 1.
  84
  85 2015-04-18  Mike Frysinger  <vapier@gentoo.org>
  86
  87         * sim-main.h (SIM_CPU): Add note to clean this up.
  88
  89 2015-04-18  Mike Frysinger  <vapier@gentoo.org>
  90
  91         * sim-main.h (sim_cia): Delete.
  92
  93 2015-04-17  Mike Frysinger  <vapier@gentoo.org>
  94
  95         * sim-main.h (CIA_GET, CIA_SET): Delete.
  96
  97 2015-04-15  Mike Frysinger  <vapier@gentoo.org>
  98
  99         * Makefile.in (SIM_OBJS): Delete sim-cpu.o.
 100         * sim-main.h (STATE_CPU): Delete.
 101
 102 2015-04-13  Mike Frysinger  <vapier@gentoo.org>
 103
 104         * configure: Regenerate.
 105
 106 2015-04-06  Mike Frysinger  <vapier@gentoo.org>
 107
 108         * Makefile.in (SIM_OBJS): Delete sim-engine.o and sim-hrw.o.
 109
 110 2015-04-01  Mike Frysinger  <vapier@gentoo.org>
 111
 112         * Makefile.in (SIM_OBJS): Delete $(SIM_EXTRA_OBJS).
 113
 114 2015-03-31  Mike Frysinger  <vapier@gentoo.org>
 115
 116         * config.in, configure: Regenerate.
 117
 118 2015-03-24  Mike Frysinger  <vapier@gentoo.org>
 119
 120         * configure: Regenerate.
 121
 122 2015-03-23  Mike Frysinger  <vapier@gentoo.org>
 123
 124         * configure: Regenerate.
 125
 126 2015-03-23  Mike Frysinger  <vapier@gentoo.org>
 127
 128         * configure: Regenerate.
 129         * configure.ac (BFIN_SIM_EXTRA_OBJS): Delete.
 130         * Makefile.in (SIM_OBJS): Delete @BFIN_SIM_EXTRA_OBJS@.
 131
 132 2015-03-23  Mike Frysinger  <vapier@gentoo.org>
 133
 134         * dv-bfin_uart.c [!HAVE_DV_SOCKSER] (dv_sockser_status,
 135         dv_sockser_write, dv_sockser_read): Delete.
 136
 137 2015-03-23  Mike Frysinger  <vapier@gentoo.org>
 138
 139         * sim-main.h: Delete run-sim.h include.
 140
 141 2015-03-16  Mike Frysinger  <vapier@gentoo.org>
 142
 143         * aclocal.m4, config.in, configure: Regenerate.
 144         * tconfig.in: Rename file ...
 145         * tconfig.h: ... here.
 146
 147 2015-03-15  Mike Frysinger  <vapier@gentoo.org>
 148
 149         * tconfig.in: Delete includes.
 150         [HAVE_DV_SOCKSER]: Delete.
 151
 152 2015-03-14  Mike Frysinger  <vapier@gentoo.org>
 153
 154         * bfin-sim.c (decode_dsp32alu_0): Change v to bu32.
 155
 156 2015-03-14  Mike Frysinger  <vapier@gentoo.org>
 157
 158         * Makefile.in (SIM_RUN_OBJS): Delete.
 159
 160 2015-03-10  Mike Frysinger  <vapier@gentoo.org>
 161
 162         PR sim/13160
 163         * Makefile.in ($(srcdir)/linux-fixed-code.h): Put a ; after the
 164         print sed command for BSD compatibility.
 165
 166 2015-03-08  Mike Frysinger  <vapier@gentoo.org>
 167
 168         PR sim/13160
 169         * Makefile.in ($(srcdir)/linux-fixed-code.h): Specify the asm input
 170         directly rather than use $<.  Move the file name to the end of the
 171         sed command to be POSIX compliant.
 172
 173 2014-08-19  Alan Modra  <amodra@gmail.com>
 174
 175         * configure: Regenerate.
 176
 177 2014-08-15  Roland McGrath  <mcgrathr@google.com>
 178
 179         * configure: Regenerate.
 180         * config.in: Regenerate.
 181
 182 2014-03-04  Mike Frysinger  <vapier@gentoo.org>
 183
 184         * configure: Regenerate.
 185
 186 2013-09-23  Alan Modra  <amodra@gmail.com>
 187
 188         * configure: Regenerate.
 189
 190 2013-06-23  Mike Frysinger  <vapier@gentoo.org>
 191
 192         * bfin-sim.c (decode_dsp32alu_0): Add note about broken handling of
 193         SEARCH with parallel insns.
 194
 195 2013-06-23  Mike Frysinger  <vapier@gentoo.org>
 196
 197         * bfin-sim.c (decode_dsp32shift_0): Make sure HLs is 0 after last
 198         insn that uses it.
 199         (decode_dsp32shiftimm_0): Likewise.
 200         Require HLs be less than 2 for accumulator shift insns.
 201
 202 2013-06-18  Mike Frysinger  <vapier@gentoo.org>
 203
 204         * bfin-sim.c (decode_dsp32alu_0): Check more opcode fields before
 205         decoding various insns.
 206
 207 2013-06-17  Mike Frysinger  <vapier@gentoo.org>
 208
 209         * TODO: Add more notes.
 210
 211 2013-06-09  Mike Frysinger  <vapier@gentoo.org>
 212
 213         * Makefile.in ($(srcdir)/linux-fixed-code.h): Add
 214         @MAINTAINER_MODE_TRUE@ as the first item in the dependency list.
 215
 216 2013-06-03  Mike Frysinger  <vapier@gentoo.org>
 217
 218         * aclocal.m4, configure: Regenerate.
 219
 220 2013-05-10  Freddie Chopin  <freddie_chopin@op.pl>
 221
 222         * configure: Rebuild.
 223
 224 2013-03-26  Mike Frysinger  <vapier@gentoo.org>
 225
 226         * aclocal.m4, configure: Regenerate.
 227
 228 2013-03-23  Joel Sherrill  <joel.sherrill@oarcorp.com>
 229
 230         * configure.ac: Use $SIM_DV_SOCKSER_O.
 231         * configure: Regenerated.
 232
 233 2012-12-20  Joel Brobecker  <brobecker@adacore.com>
 234
 235         * aclocal.m4: Revert the previous change changing
 236         the license from GPL v2 or later to GPL v3 or later
 237         (this file was generated).
 238
 239 2012-12-20  Joel Brobecker  <brobecker@adacore.com>
 240
 241         * linux-fixed-code.s: Revert the previous change changing
 242         the license from GPL v2 or later to GPL v3 or later.
 243
 244 2012-07-31  Mike Frysinger  <vapier@gentoo.org>
 245
 246         * machs.c (bf54x_roms): Pass 0x1000 to alias field of BFROM, and
 247         0x10000 to the alias field of BFROMA.
 248         (bf561_roms): Pass 0x1000 to alias field of BFROM.
 249         (bf59x_roms): Pass 0x10000 to alias field of BFROMA.
 250
 251 2012-07-31  Mike Frysinger  <vapier@gentoo.org>
 252
 253         * machs.c (bfin_reg_fetch): Change return 0 to return -1, and
 254         return -1 to return 4.
 255         (bfin_reg_store): Likewise.
 256
 257 2012-06-15  Joel Brobecker  <brobecker@adacore.com>
 258
 259         * config.in, configure: Regenerate.
 260
 261 2012-04-09  Mike Frysinger  <vapier@gentoo.org>
 262
 263         * configure.ac (SIM_AC_OPTION_HARDWARE): Add bfin_pint.
 264         * configure: Regenerate.
 265         * dv-bfin_pint.c, dv-bfin_pint.h: New device model.
 266         * machs.c (bf542_dev): Add PINT register blocks.
 267         (bf544_dev, bf547_dev): Likewise.
 268         (PINT_PIQS): Define.
 269         (bf54x_port): Add pint/gpio routing.
 270         * machs.h (BFIN_MMR_PINT_SIZE): Define.
 271
 272 2012-04-09  Mike Frysinger  <vapier@gentoo.org>
 273
 274         * configure.ac (SIM_AC_OPTION_HARDWARE): Add bfin_gpio2.
 275         * configure: Regenerate.
 276         * dv-bfin_gpio2.c, dv-bfin_gpio2.h: New device model.
 277         * machs.c (bf54x_mem): Delete GPIO mem stub.
 278         (bf542_dev): Add GPIO register blocks.
 279         (bf544_dev, bf547_dev): Likewise.
 280         * machs.h (BFIN_MMR_GPIO2_SIZE): Define.
 281
 282 2012-04-09  Robin Getz  <robin.getz@analog.com>
 283
 284         * bfin-sim.c (decode_dsp32shift_0): Extract the sign for ASHIFT
 285         and LSHIFT, and set ASTAT based on the before/after values.
 286         Rename "val" to "acc" to be consistent with other code branches.
 287
 288 2012-04-09  Robin Getz  <robin.getz@analog.com>
 289
 290         * bfin-sim.c (sgn_extend): New helper.
 291         (decode_dsp32shiftimm_0): Call lshift when newimmag is more
 292         than 16, otherwise call ashiftrt.  Set ASTAT fields as needed.
 293         For accumulator shifts, call new sgn_extend helper.
 294
 295 2012-04-08  Mike Frysinger  <vapier@gentoo.org>
 296
 297         * bfin-sim.c (illegal_instruction_or_combination): New helper.
 298         (decode_ProgCtrl_0): Call illegal_instruction_or_combination instead
 299         of illegal_instruction.
 300         (decode_PushPopReg_0, decode_CCflag_0, decode_CC2dreg_0,
 301         decode_LDSTpmod_0, decode_dagMODim_0, decode_dagMODik_0,
 302         decode_dspLDST_0, decode_LDST_0, _interp_insn_bfin): Likewise.
 303         (decode_PushPopMultiple_0): Call illegal_instruction_combination when
 304         PARALLEL_GROUP is not BFIN_PARALLEL_NONE.
 305         (decode_CCflag_0, decode_REGMV_0, decode_ALU2op_0, decode_PTR2op_0,
 306         decode_COMPI2opD_0, decode_COMPI2opP_0): Likewise.
 307         (decode_CC2stat_0): Check PARALLEL_GROUP before cbit.
 308         (decode_LDSTpmod_0): Call illegal_instruction_combination when
 309         PARALLEL_GROUP is BFIN_PARALLEL_GROUP2.
 310         (decode_dagMODim_0, decode_dagMODik_0, decode_LDST_0,
 311         decode_LDSTiiFP_0, decode_LDSTii_0): Likewise.
 312
 313 2012-04-08  Mike Frysinger  <vapier@gentoo.org>
 314
 315         * bfin-sim.h (bfin_parallel_group): New enum.
 316         (bfin_cpu_state): Add new "group" member.
 317         (PARALLEL_GROUP): Define.
 318         * bfin-sim.c (decode_ProgCtrl_0): Change INSN_LEN check to
 319         PARALLEL_GROUP.
 320         (decode_CaCTRL_0, decode_PushPopReg_0, decode_ccMV_0, decode_CCflag_0,
 321         decode_CC2dreg_0, decode_CC2stat_0, decode_BRCC_0, decode_UJUMP_0,
 322         decode_LOGI2op_0, decode_LoopSetup_0, decode_LDIMMhalf_0,
 323         decode_CALLa_0, decode_linkage_0): Likewise.
 324         (_interp_insn_bfin): Set PARALLEL_GROUP.
 325         (interp_insn_bfin): Likewise.
 326
 327 2012-04-08  Mike Frysinger  <vapier@gentoo.org>
 328
 329         * bfin-sim.c (decode_dsp32alu_0): Delete extra space in TRACE_INSN.
 330
 331 2012-04-01  Mike Frysinger  <vapier@gentoo.org>
 332
 333         * bfin-sim.c (_interp_insn_bfin): Call illegal_instruction_combination
 334         when INSN_LEN is non-zero before 32bit decode.
 335
 336 2012-04-01  Mike Frysinger  <vapier@gentoo.org>
 337
 338         * bfin-dis.c (fmtconst): Replace decimal handling with a single
 339         sprintf call and the '*' field width.
 340
 341 2012-04-01  Mike Frysinger  <vapier@gentoo.org>
 342
 343         * machs.c (bfin_model_map_bfrom): Return when mnum is 535.
 344
 345 2012-04-01  Mike Frysinger  <vapier@gentoo.org>
 346
 347         * interp.c (bfin_user_init): Move auxvt_size decl from top to
 348         inside of auxvt check.
 349
 350 2012-03-31  Mike Frysinger  <vapier@gentoo.org>
 351
 352         * dv-bfin_sic.c (bfin_sic_finish): Change iwr1 to iwr2.
 353
 354 2012-03-31  Mike Frysinger  <vapier@gentoo.org>
 355
 356         * devices.c: Include devices.h.
 357
 358 2012-03-24  Mike Frysinger  <vapier@gentoo.org>
 359
 360         * aclocal.m4, config.in, configure: Regenerate.
 361
 362 2012-03-19  Robin Getz  <robin.getz@analog.com>
 363             Mike Frysinger  <vapier@gentoo.org>
 364
 365         * bfin-sim.c (lshift): Add an overflow flag.  Delete now unused
 366         i, j, and tmp vars.  Add a new v_i var.  Split the overflow logic
 367         out from the saturate logic.  Do not set V ASTAT bits when working
 368         with accumulators.
 369         (decode_ALU2op_0): Add new argument to lshift call.
 370         (decode_LOGI2op_0, decode_dsp32shift_0, decode_dsp32shiftimm_0):
 371         Likewise.
 372
 373 2012-03-18  Mike Frysinger  <vapier@gentoo.org>
 374
 375         * dv-bfin_ebiu_amc.c (struct bfin_ebiu_amc): Add bank_base.
 376         (bfin_ebiu_amc_write_amgctl): Replace BFIN_EBIU_AMC_BASE with
 377         amc->bank_base.
 378         (bfin_ebiu_amc_finish): Assign BFIN_EBIU_AMC_BASE to amc->bank_base.
 379
 380 2012-03-18  Mike Frysinger  <vapier@gentoo.org>
 381
 382         * dv-bfin_ebiu_amc.c (bfin_ebiu_amc_attach_address_callback): Use
 383         ARRAY_SIZE rather than hardcoded constant.
 384
 385 2012-02-04  Mike Frysinger  <vapier@gentoo.org>
 386
 387         * config.in: Regenerate.
 388         * configure: Likewise.
 389         * configure.ac: Add linux/types.h to AC_CHECK_HEADERS.
 390         * dv-eth_phy.c: Check for HAVE_LINUX_TYPES_H, and delete __u16 and
 391         _LINUX_TYPES_H defines.
 392
 393 2011-12-03  Mike Frysinger  <vapier@gentoo.org>
 394
 395         * interp.c (bfin_syscall): Increase _tbuf storage.  Declare new local
 396         tstr buffer.  Call cb_get_string on tstr when handling CB_SYS_stat64,
 397         CB_SYS_lstat64, CB_SYS_open, CB_SYS_write, CB_SYS_unlink,
 398         CB_SYS_truncate, CB_SYS_rename, CB_SYS_stat, CB_SYS_lstat.  Include
 399         tstr in the tbuf output.
 400
 401 2011-12-03  Mike Frysinger  <vapier@gentoo.org>
 402
 403         * Makefile.in: Delete all dependency rules.
 404         * aclocal.m4, configure: Regenerate.
 405
 406 2011-10-19  Mike Frysinger  <vapier@gentoo.org>
 407
 408         * configure: Regenerate after common/acinclude.m4 update.
 409
 410 2011-10-17  Mike Frysinger  <vapier@gentoo.org>
 411
 412         * configure.ac: Change include to common/acinclude.m4.
 413         * aclocal.m4, configure: Regenerate.
 414
 415 2011-10-17  Mike Frysinger  <vapier@gentoo.org>
 416
 417         * configure.ac: Change AC_PREREQ to 2.64.  Delete AC_CONFIG_HEADER
 418         call.  Replace common.m4 include with SIM_AC_COMMON.
 419         * configure: Regenerate.
 420
 421 2011-09-28  Mike Frysinger  <vapier@gentoo.org>
 422
 423         * bfin-sim.c (decode_dsp32shift_0): Use STORE() for VIT_MAX insns.
 424
 425 2011-07-05  Mike Frysinger  <vapier@gentoo.org>
 426
 427         * interp.c (sim_do_command): Delete.
 428
 429 2011-07-01  Mike Frysinger  <vapier@gentoo.org>
 430
 431         * interp.c (cb_linux_stat_map_32, cb_linux_stat_map_64): Rename from
 432         stat_map_32 and stat_map_64.
 433         (cb_libgloss_stat_map_32): New stat map.
 434         (stat_map_32, stat_map_64): New stat map pointers.
 435         (bfin_user_init): Assign stat_map_32 to cb_linux_stat_map_32 and
 436         stat_map_64 to cb_linux_stat_map_64.
 437         (bfin_virtual_init): New function.
 438         (sim_create_inferior): Call bfin_virtual_init for all other envs.
 439
 440 2011-06-22  Mike Frysinger  <vapier@gentoo.org>
 441
 442         * interp.c (bfin_syscall): Delete old comment.  Set dreg 1 to
 443         sc.result2 and dreg 2 to sc.errcode.
 444
 445 2011-06-18  Robin Getz  <robin.getz@analog.com>
 446
 447         * bfin-sim.c (decode_dsp32shift_0): Clear ASTAT[AV] if val is 0,
 448         else set it.  Set ASTAT[AVS] if val is 0.  Do this for LSHIFT and
 449         ASHIFT accumulator insns.
 450
 451 2011-06-18  Robin Getz  <robin.getz@analog.com>
 452
 453         * bfin-sim.c (ashiftrt): If size is 40, do not call SET_ASTATREG.
 454         (lshiftrt): Likewise.
 455
 456 2011-06-18  Robin Getz  <robin.getz@analog.com>
 457
 458         * bfin-sim.c (decode_dsp32shift_0): Use get_unextended_acc
 459         rather than get_extended_acc in LSHIFT insns.
 460
 461 2011-06-18  Robin Getz  <robin.getz@analog.com>
 462
 463         * bfin-sim.c (decode_macfunc): Handle MM when mmod is M_TFU.
 464         Check MM once when mmod is M_FU to match M_TFU better.
 465
 466 2011-06-18  Robin Getz  <robin.getz@analog.com>
 467
 468         * bfin-sim.c (decode_dsp32shiftimm_0): When shift is greater than
 469         32, perform a left shift.  Update the corresponding AV bit.  Set
 470         AZ when the low 32bits are also zero.
 471
 472 2011-06-18  Robin Getz  <robin.getz@analog.com>
 473
 474         * bfin-sim.c (decode_dsp32shiftimm_0): With left shift vector insns,
 475         call lshift only when count is positive.  Otherwise, call ashiftrt.
 476         With arithmetic right shift insns, call ashiftrt when the value is
 477         small enough, otherwise call lshift.
 478
 479 2011-06-18  Robin Getz  <robin.getz@analog.com>
 480
 481         * bfin-sim.c (extract_mult): Call saturate_s16 directly when
 482         mmod is M_IH rather than computing the result by hand.
 483
 484 2011-06-18  Robin Getz  <robin.getz@analog.com>
 485
 486         * bfin-sim.c (decode_macfunc): Add nosat_acc to track acc value
 487         before saturation, set sat when more cases saturate, and set the
 488         overflow bit based on these results.  For M_TFU, M_IU, M_FU, and
 489         M_W32, change the max values compared against.
 490         (decode_dsp32mac_0): Delete v_i and add v_0 and v_1.  Pass v_1
 491         when processing MAC1 and pass v_0 when processing MAC0.  Combine
 492         the results into the V/VS ASTAT bits.
 493
 494 2011-06-18  Robin Getz  <robin.getz@analog.com>
 495
 496         * bfin-sim.c (extract_mult): Call saturate_s32 when MM is set
 497         and mmod is M_IU.  Call saturate_s16 when MM is set and mmod
 498         is M_TFU.
 499
 500 2011-06-18  Robin Getz  <robin.getz@analog.com>
 501
 502         * bfin-sim.c (decode_multfunc): Call new is_macmod_signed, and
 503         allow MM to sign extend all the time.
 504         (decode_macfunc): Likewise.  Drop sign extension of unsigned
 505         values.
 506
 507 2011-06-18  Robin Getz  <robin.getz@analog.com>
 508
 509         * bfin-sim.c (saturate_s40_astat): Change ">=" to ">".
 510         (decode_macfunc): Likewise when mmod is M_IH.
 511
 512 2011-06-18  Mike Frysinger  <vapier@gentoo.org>
 513
 514         * interp.c (sim_create_inferior): Change free to freeargv.
 515
 516 2011-06-04  Mike Frysinger  <vapier@gentoo.org>
 517
 518         * machs.c (bf534_dev, bf537_dev): Add glue-or devices.
 519         (bf537_port): Define applicable devices with PORT to the glue-or
 520         devices instead of SIC.
 521         (bfin_model_hw_tree_init): Drop old sim_hw_parse call for bfin_sic.
 522         Only parse reg/type when the device has an address.  Move the call
 523         to dv_bfin_hw_port_parse up before slash check.
 524
 525 2011-06-04  Mike Frysinger  <vapier@gentoo.org>
 526
 527         * dv-bfin_sic.c (ENC, DEC_PIN, DEC_SIC): Move above the
 528         BFIN_SIC_TO_CEC_PORTS definition.
 529         (SIC_PORTS): New define.
 530         (bfin_sic_50x_ports, bfin_sic_51x_ports, bfin_sic_52x_ports,
 531         bfin_sic_533_ports, bfin_sic_537_ports, bfin_sic_538_ports,
 532         bfin_sic_54x_ports, bfin_sic_561_ports, bfin_sic_59x_ports):
 533         Delete old layouts.
 534         (bfin_sic1_ports, bfin_sic2_ports, bfin_sic3_ports,
 535         bfin_sic_561_ports): Define new layouts with SIC_PORTS().
 536         (bfin_sic_finish): Change reference to bfin_sic_50x_ports,
 537         bfin_sic_51x_ports, bfin_sic_52x_ports, and bfin_sic_538_ports
 538         to bfin_sic2_ports.  Change reference to bfin_sic_533_ports,
 539         bfin_sic_537_ports, and bfin_sic_59x_ports to bfin_sic1_ports.
 540         Change reference to bfin_sic_54x_ports to bfin_sic3_ports.
 541         * machs.c (bfin_port_layout): New structure.
 542         (bfin_model_data): Add new "port" and "port_count" members.
 543         (PORT, SIC): New defines.
 544         (bf000_port, bf50x_port, bf51x_port, bf52x_port, bf533_port,
 545         bf537_port, bf538_port, bf54x_port, bf561_port, bf592_port):
 546         Move and redefine port layout from dv-bfin_sic.c to here.
 547         (bf504_port, bf506_port, bf512_port, bf514_port, bf516_port,
 548         bf518_port, bf522_port, bf523_port, bf524_port, bf525_port,
 549         bf526_port, bf527_port, bf531_port, bf532_port, bf534_port,
 550         bf536_port, bf539_port, bf542_port, bf544_port, bf547_port,
 551         bf548_port, bf549_port): New defines.
 552         (bfin_model_data): Link in new bfin_port_layout.port member.
 553         (dv_bfin_hw_port_parse): New function.
 554         (dv_bfin_hw_parse): Call new dv_bfin_hw_port_parse function.
 555         (bfin_model_hw_tree_init): Replace calls to sim_hw_parse for
 556         bfin_sic links with new dv_bfin_hw_port_parse function.
 557
 558 2011-06-03  Mike Frysinger  <vapier@gentoo.org>
 559
 560         * dv-bfin_dma.c (bfin_dma_io_write_buffer): Fix indentation.
 561
 562 2011-05-25  Mike Frysinger  <vapier@gentoo.org>
 563
 564         * sim-main.h (TRACE_SYSCALL): Change EVENTS to SYSCALL.
 565
 566 2011-05-25  Mike Frysinger  <vapier@gentoo.org>
 567
 568         * dv-bfin_cec.h (BFIN_COREMMR_CEC_{BASE,SIZE}): Move to ...
 569         * dv-bfin_ctimer.h (BFIN_COREMMR_CTIMER_{BASE,SIZE}): Move to ...
 570         * dv-bfin_dma.h (BFIN_MMR_DMA_SIZE): Move to ...
 571         * dv-bfin_dmac.h (BFIN_MMR_DMAC{0,1}_BASE): Move to ...
 572         * dv-bfin_ebiu_amc.h (BF{IN,50X,54X}_MMR_EBIU_AMC_SIZE): Move to ...
 573         * dv-bfin_ebiu_ddrc.h (BFIN_MMR_EBIU_DDRC_SIZE): Move to ...
 574         * dv-bfin_ebiu_sdc.h (BFIN_MMR_EBIU_SDC_SIZE): Move to ...
 575         * dv-bfin_emac.h (BFIN_MMR_EMAC_{BASE,SIZE}): Move to ...
 576         * dv-bfin_eppi.h (BFIN_MMR_EPPI_SIZE): Move to ...
 577         * dv-bfin_evt.h (BFIN_COREMMR_EVT_{BASE,SIZE}): Move to ...
 578         * dv-bfin_gpio.h (BFIN_MMR_GPIO_SIZE): Move to ...
 579         * dv-bfin_gptimer.h (BFIN_MMR_GPTIMER_SIZE): Move to ...
 580         * dv-bfin_jtag.h (BFIN_COREMMR_JTAG_{BASE,SIZE}): Move to ...
 581         * dv-bfin_mmu.h (BFIN_COREMMR_MMU_{BASE,SIZE}): Move to ...
 582         * dv-bfin_nfc.h (BFIN_MMR_NFC_SIZE): Move to ...
 583         * dv-bfin_otp.h (BFIN_MMR_OTP_SIZE): Move to ...
 584         * dv-bfin_pfmon.h (BFIN_COREMMR_PFMON_{BASE,SIZE}): Move to ...
 585         * dv-bfin_pll.h (BFIN_MMR_PLL_{BASE,SIZE}): Move to ...
 586         * dv-bfin_ppi.h (BFIN_MMR_PPI_SIZE): Move to ...
 587         * dv-bfin_rtc.h (BFIN_MMR_RTC_SIZE): Move to ...
 588         * dv-bfin_sic.h (BFIN_MMR_SIC_{BASE,SIZE}): Move to ...
 589         * dv-bfin_spi.h (BFIN_MMR_SPI_SIZE): Move to ...
 590         * dv-bfin_trace.h (BFIN_COREMMR_TRACE_{BASE,SIZE}): Move to ...
 591         * dv-bfin_twi.h (BFIN_MMR_TWI_SIZE): Move to ...
 592         * dv-bfin_uart.h (BFIN_MMR_UART_SIZE): Move to ...
 593         * dv-bfin_uart2.h (BFIN_MMR_UART2_SIZE): Move to ...
 594         * dv-bfin_wdog.h (BFIN_MMR_WDOG_SIZE): Move to ...
 595         * dv-bfin_wp.h (BFIN_COREMMR_WP_{BASE,SIZE}): Move to ...
 596         * machs.h: ... here.
 597         * machs.c: Delete all dv-bfin_*.h includes except for cec/dmac.
 598
 599 2011-05-25  Mike Frysinger  <vapier@gentoo.org>
 600
 601         * Makefile.in (dv-bfin_pfmon.o): New target.
 602         * configure.ac (SIM_AC_OPTION_HARDWARE): Add bfin_pfmon.
 603         * configure: Regenerated.
 604         * dv-bfin_pfmon.c, dv-bfin_pfmon.h: New files.
 605         * machs.c: Add include new bfin_pfmon.h.
 606         (bfin_core_dev): Add pfmon.
 607
 608 2011-05-25  Mike Frysinger  <vapier@gentoo.org>
 609
 610         * machs.c (bf526_roms): Add a region with rev of 2.
 611         (bf54x_roms): Add regions with rev of 4.
 612         * bfroms/all.h: Include new bf526-0.2.h, bf54x-0.4.h, and
 613         bf54x_l1-0.4.h headers.
 614         * bfroms/bf526-0.2.h, bfroms/bf54x-0.4.h, bfroms/bf54x_l1-0.4.h:
 615         New header files.
 616
 617 2011-05-14  Mike Frysinger  <vapier@gentoo.org>
 618
 619         * bfin-sim.c (decode_PushPopReg_0): Delete (grp == 1 && reg == 6)
 620         check for SP reg.
 621
 622 2011-05-14  Mike Frysinger  <vapier@gentoo.org>
 623
 624         * dv-bfin_uart.c (bfin_uart_write_byte): Add a mcr arg.  Declare a
 625         local uart.  When LOOP_ENA is set in mcr, write to the saved byte
 626         and count fields of the uart.
 627         (bfin_uart_io_write_buffer): Pass uart->mcr to bfin_uart_write_byte
 628         and bfin_uart_get_next_byte.
 629         (bfin_uart_get_next_byte): Add a mcr arg.  Move uart->saved_count
 630         check first, and skip the remaining code when LOOP_ENA is set in mcr.
 631         * dv-bfin_uart.h (bfin_uart_write_byte): Add an mcr argument.
 632         (bfin_uart_get_next_byte): Likewise.
 633         (XOFF, MRTS, RFIT, RFRT, LOOP_ENA, FCPOL, ARTS, ACTS): Define.
 634         * dv-bfin_uart2.c (bfin_uart_io_write_buffer): Padd uart->mcr when
 635         calling bfin_uart_write_byte and bfin_uart_get_next_byte.
 636
 637 2011-05-09  Mike Frysinger  <vapier@gentoo.org>
 638
 639         * dv-bfin_uart2.c (bfin_uart_io_read_buffer): Clear DR/THRE/TEMT bits
 640         from uart->lsr before setting them.
 641
 642 2011-04-27  Mike Frysinger  <vapier@gentoo.org>
 643
 644         * dv-bfin_dmac.c (bfin_dmac): Constify pmap array.
 645         (bfin_dmac_50x_pmap, bfin_dmac_51x_pmap, bfin_dmac_52x_pmap,
 646         bfin_dmac_533_pmap, bfin_dmac_537_pmap, bfin_dmac0_538_pmap,
 647         bfin_dmac1_538_pmap, bfin_dmac0_54x_pmap, bfin_dmac1_54x_pmap,
 648         bfin_dmac0_561_pmap, bfin_dmac1_561_pmap, bfin_dmac_59x_pmap):
 649         Likewise.
 650
 651 2011-04-26  Mike Frysinger  <vapier@gentoo.org>
 652
 653         * dv-bfin_gpio.c (bfin_gpio_forward_ouput): New function.
 654         (bfin_gpio_io_write_buffer): Store the current port state into
 655         "data", and call bfin_gpio_forward_ouput when the data or dir
 656         MMRs are updated.
 657         (bfin_gpio_ports): Change p0..p15 to bidirect_port.
 658
 659 2011-04-26  Mike Frysinger  <vapier@gentoo.org>
 660
 661         * dv-bfin_gpio.c (bfin_gpio): Add "int_state" member.
 662         (bfin_gpio_forward_int, bfin_gpio_forward_ints): New functions.
 663         (bfin_gpio_io_write_buffer): Call bfin_gpio_forward_int when the
 664         mask a or mask b MMRs are written.
 665         (bfin_gpio_port_event): When handling edge gpios, set the bit in
 666         int_state, call bfin_gpio_forward_ints, and then clear the bit.
 667         When handling level gpios, clear/set the bit in int_state rather
 668         than returning immediately.  Call bfin_gpio_forward_ints instead
 669         of checking mask[ab] and calling HW_TRACE/hw_port_event directly.
 670
 671 2011-04-16  Mike Frysinger  <vapier@gentoo.org>
 672
 673         * bfin-sim.c (decode_dsp32alu_0): Call STORE instead of SET_DREG for
 674         BYTEOP2P, BYTEOP3P, BYTEOP1P, BYTEOP16P, BYTEOP16M, BYTEPACK, and
 675         BYTEUNPACK.
 676         (decode_dsp32shift_0): Call STORE instead of SET_DREG for PACK,
 677         BITMUX, EXTRACT, DEPOSIT, ALIGN8, ALIGN16, and ALIGN24.
 678
 679 2011-04-14  Mike Frysinger  <vapier@gentoo.org>
 680
 681         * bfin-sim.c (decode_dsp32alu_0): Set DIS_ALGN_EXPT when handling
 682         BYTEOP2P, BYTEOP3P, SAA, BYTEOP1P, BYTEOP16P, BYTEOP16M, BYTEPACK,
 683         and BYTEUNPACK insns.
 684
 685 2011-04-11  Mike Frysinger  <vapier@gentoo.org>
 686
 687         * dv-bfin_sic.c (bfin_sic_port_event): New helper function.
 688         (bfin_sic_52x_port_event, bfin_sic_537_port_event,
 689         bfin_sic_54x_port_event, bfin_sic_561_port_event): Include level
 690         in the trace output, and call the new bfin_sic_port_event func.
 691
 692 2011-04-11  Mike Frysinger  <vapier@gentoo.org>
 693
 694         * dv-bfin_gpio.c (bfin_gpio_ports): Add p15.
 695
 696 2011-04-01  Mike Frysinger  <vapier@gentoo.org>
 697
 698         * dv-bfin_otp.c (bfin_otp_ports): Declare.
 699         (bfin_otp_finish): Call set_hw_ports with bfin_otp_ports.
 700
 701 2011-03-29  Mike Frysinger  <vapier@gentoo.org>
 702
 703         * configure: Regenerate after common/aclocal.m4 changes.
 704
 705 2011-03-28  Robin Getz  <robin.getz@analog.com>
 706
 707         * bfin-sim.c (decode_dsp32alu_0): Cast high 16bits of A0.W to bs16
 708         and add to casted low 16bits of A0.L and store in val0.  Cast high
 709         16bits of A1.W to bs16 and add to casted low 16bits of A1.L and
 710         store in val1.  Delete bit checks of val0 and val1.
 711
 712 2011-03-26  Robin Getz  <robin.getz@analog.com>
 713
 714         * bfin-sim.c (decode_dsp32alu_0): Set result to 0x7FFFFFFF when
 715         the result was 0x80000000 for RND12 subtraction.
 716
 717 2011-03-26  Robin Getz  <robin.getz@analog.com>
 718
 719         * bfin-sim.c (decode_dsp32alu_0): Set VS when V is set.
 720
 721 2011-03-24  Mike Frysinger  <vapier@gentoo.org>
 722
 723         * dv-bfin_gpio.c (bfin_gpio_port_event): Call HW_TRACE at every
 724         major code flow point.
 725         * dv-bfin_sic.c (bfin_sic_forward_interrupts): Call HW_TRACE just
 726         before calling hw_port_event on ourselves.
 727         (bfin_sic_52x_port_event, bfin_sic_537_port_event,
 728         bfin_sic_54x_port_event, bfin_sic_561_port_event): Call HW_TRACE
 729         at the start of the function.
 730
 731 2011-03-24  Mike Frysinger  <vapier@gentoo.org>
 732
 733         * dv-bfin_gpio.c (bfin_gpio_port_event): Split dir/inen bit checking.
 734         Normalize "level" to 0/1 values.  Shift "level" over by "my_port".
 735         Invert port->both bit check.
 736
 737 2011-03-24  Mike Frysinger  <vapier@gentoo.org>
 738
 739         * dv-bfin_gpio.c (bfin_gpio_io_write_buffer): Subtract 2 from the
 740         valuep pointer for clear MMRs, 4 for set MMRs, and 6 for toggle MMRs.
 741
 742 2011-03-23  Mike Frysinger  <vapier@gentoo.org>
 743
 744         * TODO: Document some known SIC issues.
 745
 746 2011-03-23  Mike Frysinger  <vapier@gentoo.org>
 747
 748         * devices.h (dv_w1c): Fix typos in documentation of "bits" arg.
 749         * dv-bfin_cec.c (bfin_cec_io_write_buffer): Pass 0xffee to dv_w1c_4.
 750         * dv-bfin_emac.c (bfin_emac_io_write_buffer): Pass 0xe1 to dv_w1c_4
 751         for systat MMR and -1 to dv_w1c_4 for [rt]x_stky/mmc_[rt]irqs MMRs.
 752         * dv-bfin_eppi.c (bfin_eppi_io_write_buffer): Pass 0x1ff to dv_w1c_2.
 753         * dv-bfin_gpio.c (bfin_gpio_io_write_buffer): Invert bits to dv_w1c_2.
 754         * dv-bfin_jtag.c (bfin_jtag_io_write_buffer): Invert bits to dv_w1c_4.
 755         * dv-bfin_nfc.c (bfin_nfc_io_write_buffer): Invert bits to dv_w1c_2.
 756         * dv-bfin_otp.c (bfin_otp_io_write_buffer): Invert bits to dv_w1c_2.
 757         * dv-bfin_ppi.c (bfin_ppi_io_write_buffer): Invert bits to dv_w1c_2.
 758         * dv-bfin_rtc.c (bfin_rtc_io_write_buffer): Invert bits to dv_w1c_2.
 759         * dv-bfin_spi.c (bfin_spi_io_write_buffer): Invert bits to dv_w1c_2.
 760         * dv-bfin_twi.c (bfin_twi_io_write_buffer): Invert bits to dv_w1c_2.
 761         * dv-bfin_uart2.c (bfin_uart_io_write_buffer): Invert bits to dv_w1c_2.
 762
 763 2011-03-23  Mike Frysinger  <vapier@gentoo.org>
 764
 765         * dv-bfin_uart.h (TFI, BI, FE, PE, OE): Define.
 766
 767 2011-03-23  Mike Frysinger  <vapier@gentoo.org>
 768
 769         * dv-bfin_twi.h (LOSTARB): Rename from LOSTARG.
 770
 771 2011-03-23  Robin Getz  <robin.getz@analog.com>
 772
 773         * bfin-sim.c (decode_dsp32shift_0): Set acc0 to the unextended
 774         value for the VIT_MAX insn, and mask off the result when done.
 775
 776 2011-03-23  Robin Getz  <robin.getz@analog.com>
 777
 778         * bfin-sim.c (decode_dsp32alu_0): Set A1 to a1_lo when up_hi is false,
 779         and set A0 to a0_lo when up_lo is false.
 780
 781 2011-03-23  Robin Getz  <robin.getz@analog.com>
 782
 783         * bfin-sim.c (decode_dsp32alu_0): Call saturate_s40_astat instead of
 784         saturate_s40, and use the v parameter to update the AV bit.  Set the
 785         AC bit only when the final result is 0.
 786
 787 2011-03-23  Mike Frysinger  <vapier@gentoo.org>
 788
 789         * dv-bfin_sic.c (ENC, DEC_PIN, DEC_SIC): Define.
 790         (bfin_sic_50x_ports, bfin_sic_51x_ports, bfin_sic_52x_ports,
 791         bfin_sic_533_ports, bfin_sic_537_ports, bfin_sic_538_ports,
 792         bfin_sic_54x_ports, bfin_sic_561_ports, bfin_sic_59x_ports):
 793         Encode ids with the ENC macro.
 794         (bfin_sic_52x_port_event, bfin_sic_537_port_event,
 795         bfin_sic_54x_port_event, bfin_sic_561_port_event): Set idx
 796         from my_port with DEC_SIC, and set bit from my_port with DEC_PIN.
 797         (bfin_sic_533_port_event): Delete.
 798         (bfin_sic_finish): Call set_hw_port_event with
 799         bfin_sic_537_port_event for BF533 and BF59x targets.
 800
 801 2011-03-23  Robin Getz  <robin.getz@analog.com>
 802
 803         * bfin-sim.c (decode_dsp32alu_0): Drop the src0/src1 check for
 804         BYTEOP1P, BYTEOP2P, and BYTEOP3P insns.
 805
 806 2011-03-23  Mike Frysinger  <vapier@gentoo.org>
 807
 808         * machs.c (bf50x_dev, bf512_dev, bf516_dev, bf522_dev, bf526_dev,
 809         bf533_dev, bf534_dev, bf537_dev, bf538_dev, bf561_dev, bf592_dev):
 810         Change bfin_gpio addresses from f/g/h to 5/6/7.
 811         (bfin_model_hw_tree_init): Add the bfin_gpio address base to 'a'.
 812
 813 2011-03-17  Mike Frysinger  <vapier@gentoo.org>
 814
 815         * configure.ac (AC_CHECK_FUNCS): Check for kill and pread.
 816         * configure: Regenerate.
 817         * config.in: Regenerate.
 818         * interp.c (bfin_syscall): Check for HAVE_{KILL,PREAD} before using
 819         kill or pread.
 820
 821 2011-03-15  Mike Frysinger  <vapier@gentoo.org>
 822
 823         * Makefile.in (dv-bfin_gpio.o): New target.
 824         * configure.ac (SIM_AC_OPTION_HARDWARE): Add bfin_gpio.
 825         * configure: Regenerate.
 826         * dv-bfin_gpio.c, dv-bfin_gpio.h: New files.
 827         * machs.c: Include dv-bfin_gpio.h.
 828         (bf50x_mem, bf51x_mem, bf52x_mem, bf531_mem, bf532_mem, bf533_mem,
 829         bf534_mem, bf536_mem, bf537_mem, bf538_mem, bf561_mem, bf592_mem):
 830         Delete GPIO memory stubs.
 831         (bf50x_dev, bf512_dev, bf516_dev, bf522_dev, bf526_dev, bf533_dev,
 832         bf534_dev, bf537_dev, bf538_dev, bf561_dev, bf592_dev): Add GPIO
 833         peripheral devices.
 834         (bfin_model_hw_tree_init): Hook up GPIO interrupts to SIC.
 835
 836 2011-03-15  Mike Frysinger  <vapier@gentoo.org>
 837
 838         * bfroms/bf50x-0.0.h, bfroms/bf51x-0.0.h, bfroms/bf51x-0.1.h,
 839         bfroms/bf51x-0.2.h, bfroms/bf526-0.0.h, bfroms/bf526-0.1.h,
 840         bfroms/bf527-0.0.h, bfroms/bf527-0.1.h, bfroms/bf527-0.2.h,
 841         bfroms/bf533-0.1.h, bfroms/bf533-0.2.h, bfroms/bf533-0.3.h,
 842         bfroms/bf537-0.0.h, bfroms/bf537-0.1.h, bfroms/bf537-0.3.h,
 843         bfroms/bf538-0.0.h, bfroms/bf54x-0.0.h, bfroms/bf54x-0.1.h,
 844         bfroms/bf54x-0.2.h, bfroms/bf54x_l1-0.0.h, bfroms/bf54x_l1-0.1.h,
 845         bfroms/bf54x_l1-0.2.h, bfroms/bf561-0.5.h, bfroms/bf59x-0.0.h,
 846         bfroms/bf59x_l1-0.1.h, dv-bfin_cec.c, dv-bfin_ctimer.c,
 847         dv-bfin_dma.c, dv-bfin_dmac.c, dv-bfin_ebiu_amc.c,
 848         dv-bfin_ebiu_ddrc.c, dv-bfin_ebiu_sdc.c, dv-bfin_emac.c,
 849         dv-bfin_eppi.c, dv-bfin_evt.c, dv-bfin_gptimer.c, dv-bfin_jtag.c,
 850         dv-bfin_mmu.c, dv-bfin_nfc.c, dv-bfin_otp.c, dv-bfin_pll.c,
 851         dv-bfin_ppi.c, dv-bfin_rtc.c, dv-bfin_sic.c, dv-bfin_spi.c,
 852         dv-bfin_trace.c, dv-bfin_twi.c, dv-bfin_uart.c, dv-bfin_uart2.c,
 853         dv-bfin_wdog.c, dv-bfin_wp.c, dv-eth_phy.c, gui.c,
 854         linux-fixed-code.h, linux-targ-map.h, machs.c, Makefile.in: Fix style.
 855
 856 2011-03-15  Robin Getz  <robin.getz@analog.com>
 857
 858         * bfin-sim.c (decode_dsp32alu_0): Set AZ based on val for 16bit adds
 859         and subs.
 860
 861 2011-03-15  Robin Getz  <robin.getz@analog.com>
 862
 863         * bfin-sim.c (decode_macfunc): Move acc STOREs behind op != 3 check.
 864
 865 2011-03-15  Robin Getz  <robin.getz@analog.com>
 866
 867         * bfin-sim.c (decode_macfunc): New neg parameter.  Set when the
 868         high bit is set after extract_mult.
 869         (decode_dsp32mac_0): Declare n_1 and n_0.  Pass to the decode_macfunc
 870         functions.  Use these to update the AN bit.
 871
 872 2011-03-15  Robin Getz  <robin.getz@analog.com>
 873
 874         * bfin-sim.c (decode_dsp32mult_0): Declare v_i0 and v_i1.  Pass to
 875         the extract_mult functions.  Include these when updating the V, VS,
 876         and V_COPY bits.
 877
 878 2011-03-15  Robin Getz  <robin.getz@analog.com>
 879
 880         * bfin-sim.c (astat_names): New global bit array.
 881         (decode_CC2stat_0): Delete local astat_name and astat_names.
 882         (decode_psedodbg_assert_0): Move hardcoded offset into a variable.
 883         Print out ASTAT bit values when checking an ASTAT register.
 884
 885 2010-03-15  Robin Getz  <robin.getz@analog.com>
 886
 887         * bfin-sim.c (extract_mult): Handle M_IU.
 888
 889 2011-03-05  Mike Frysinger  <vapier@gentoo.org>
 890
 891         * Makefile.in, TODO, aclocal.m4, bfin-sim.c, bfin-sim.h,
 892         bfroms/all.h, bfroms/bf50x-0.0.h, bfroms/bf51x-0.0.h,
 893         bfroms/bf51x-0.1.h, bfroms/bf51x-0.2.h, bfroms/bf526-0.0.h,
 894         bfroms/bf526-0.1.h, bfroms/bf527-0.0.h, bfroms/bf527-0.1.h,
 895         bfroms/bf527-0.2.h, bfroms/bf533-0.1.h, bfroms/bf533-0.2.h,
 896         bfroms/bf533-0.3.h, bfroms/bf537-0.0.h, bfroms/bf537-0.1.h,
 897         bfroms/bf537-0.3.h, bfroms/bf538-0.0.h, bfroms/bf54x-0.0.h,
 898         bfroms/bf54x-0.1.h, bfroms/bf54x-0.2.h, bfroms/bf54x_l1-0.0.h,
 899         bfroms/bf54x_l1-0.1.h, bfroms/bf54x_l1-0.2.h, bfroms/bf561-0.5.h,
 900         bfroms/bf59x-0.0.h, bfroms/bf59x_l1-0.1.h, config.in, configure,
 901         configure.ac, devices.c, devices.h, dv-bfin_cec.c, dv-bfin_cec.h,
 902         dv-bfin_ctimer.c, dv-bfin_ctimer.h, dv-bfin_dma.c, dv-bfin_dma.h,
 903         dv-bfin_dmac.c, dv-bfin_dmac.h, dv-bfin_ebiu_amc.c, dv-bfin_ebiu_amc.h,
 904         dv-bfin_ebiu_ddrc.c, dv-bfin_ebiu_ddrc.h, dv-bfin_ebiu_sdc.c,
 905         dv-bfin_ebiu_sdc.h, dv-bfin_emac.c, dv-bfin_emac.h, dv-bfin_eppi.c,
 906         dv-bfin_eppi.h, dv-bfin_evt.c, dv-bfin_evt.h, dv-bfin_gptimer.c,
 907         dv-bfin_gptimer.h, dv-bfin_jtag.c, dv-bfin_jtag.h, dv-bfin_mmu.c,
 908         dv-bfin_mmu.h, dv-bfin_nfc.c, dv-bfin_nfc.h, dv-bfin_otp.c,
 909         dv-bfin_otp.h, dv-bfin_pll.c, dv-bfin_pll.h, dv-bfin_ppi.c,
 910         dv-bfin_ppi.h, dv-bfin_rtc.c, dv-bfin_rtc.h, dv-bfin_sic.c,
 911         dv-bfin_sic.h, dv-bfin_spi.c, dv-bfin_spi.h, dv-bfin_trace.c,
 912         dv-bfin_trace.h, dv-bfin_twi.c, dv-bfin_twi.h, dv-bfin_uart.c,
 913         dv-bfin_uart.h, dv-bfin_uart2.c, dv-bfin_uart2.h, dv-bfin_wdog.c,
 914         dv-bfin_wdog.h, dv-bfin_wp.c, dv-bfin_wp.h, dv-eth_phy.c, gui.c,
 915         gui.h, insn_list.def, interp.c, linux-fixed-code.h, linux-fixed-code.s,
 916         linux-targ-map.h, machs.c, machs.h, proc_list.def, sim-main.h,
 917         tconfig.in: New Blackfin port.